mirror of
https://gitlab.com/prpl-foundation/prplmesh/prplMesh.git
synced 2025-12-20 01:21:22 +08:00
61497cd9a3
add mozart into r4 test loop; align the mozart configuration of r4 and boradfarm; Signed-off-by: Lu Dai <lu.dai@mind.be>
112 lines
4.1 KiB
Bash
112 lines
4.1 KiB
Bash
#!/bin/sh
|
|
|
|
# We need to source some files which are only available on prplWrt
|
|
# devices, so prevent shellcheck from trying to read them:
|
|
# shellcheck disable=SC1091
|
|
|
|
set -e
|
|
|
|
# Start with a new log file:
|
|
rm -f /var/log/messages && syslog-ng-ctl reload
|
|
|
|
# Stop the default ssh server on the lan-bridge
|
|
sh /etc/init.d/ssh-server stop || true
|
|
rm -f /etc/rc.d/S*ssh-server
|
|
|
|
# Stop and disable the firewall:
|
|
sh /etc/init.d/tr181-firewall stop || true
|
|
rm -f /etc/rc.d/S*tr181-firewall
|
|
|
|
# Stop and disable the DHCPv4 client: (PPW-888)
|
|
sh /etc/init.d/tr181-dhcpv4client stop || true
|
|
rm -f /etc/rc.d/*dhcpv4client
|
|
pkill -f -9 tr181-dhcpv4client || true
|
|
|
|
# Stop and disable the DHCP clients and servers:
|
|
ba-cli DHCPv4Client.Client.wan.Enable=0
|
|
ba-cli DHCPv6Client.Client.wan.Enable=0
|
|
ba-cli DHCPv4Server.Enable=0
|
|
ba-cli DHCPv6Server.Enable=0
|
|
|
|
# We use WAN for the control interface.
|
|
# Add the IP address if there is none yet:
|
|
ba-cli IP.Interface.wan.IPv4Address.primary.? | grep -Eq "No data found|ERROR" && {
|
|
echo "Adding IP address $IP"
|
|
ba-cli 'IP.Interface.wan.IPv4Address.+{Alias="primary", AddressingType="Static"}'
|
|
}
|
|
# Configure it:
|
|
ba-cli 'IP.Interface.wan.IPv4Address.primary.{IPAddress="192.168.250.180", SubnetMask="255.255.255.0", AddressingType="Static", Enable=1}'
|
|
# Enable it:
|
|
ba-cli IP.Interface.wan.IPv4Enable=1
|
|
|
|
# Set the LAN bridge IP:
|
|
ba-cli "IP.Interface.[Name == \"br-lan\"].IPv4Address.lan.IPAddress=192.165.100.180"
|
|
|
|
# Setting BackhaulWireIface, or persistence can fail (PPM-3339)
|
|
/etc/init.d/prplmesh stop && sleep 2
|
|
/etc/init.d/prplmesh start && sleep 2
|
|
|
|
# Set the wired backhaul interface:
|
|
if ba-cli "X_PRPLWARE-COM_Agent.Configuration.?" | grep -Eq "No data found|ERROR"; then
|
|
# Prplmesh agent is not running. Data model isn't up.
|
|
echo "Prplmesh agent is not running"
|
|
else
|
|
# Prplmesh agent is running, configure it over the bus
|
|
echo "Setting prplMesh BackhaulWireInterface over DM"
|
|
ba-cli X_PRPLWARE-COM_Agent.Configuration.BackhaulWireInterface="lan0"
|
|
fi
|
|
|
|
|
|
ba-cli WiFi.Radio.*.RegulatoryDomain="US"
|
|
|
|
ba-cli WiFi.AccessPoint.*.MBOEnable=1
|
|
|
|
# Configure Operating Standards
|
|
ba-cli "WiFi.Radio.*.OperatingStandardsFormat=\"Standard\""
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"2.4GHz\"].OperatingStandards=\"b,g,n,ax\""
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"5GHz\"].OperatingStandards=\"a,n,ac,ax\""
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"6GHz\"].OperatingStandards=\"ax\""
|
|
|
|
|
|
# Make sure specific channels are configured. If channel is set to 0,
|
|
# ACS will be configured. If ACS is configured hostapd will refuse to
|
|
# switch channels when we ask it to. Channels 1 and 48 were chosen
|
|
# because they are NOT used in the WFA certification tests (this
|
|
# allows to verify that the device actually switches channel as part
|
|
# of the test).
|
|
# See also PPM-1928.
|
|
ba-cli WiFi.Radio.*.AutoChannelEnable=0
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"2.4GHz\"].Channel=1"
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"5GHz\"].Channel=48"
|
|
|
|
# Restrict channel bandwidth or the certification test could miss beacons
|
|
# (see PPM-258)
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"2.4GHz\"].OperatingChannelBandwidth=20MHz"
|
|
ba-cli "WiFi.Radio.[OperatingFrequencyBand == \"5GHz\"].OperatingChannelBandwidth=20MHz"
|
|
|
|
# Traffic Separation Configuration
|
|
ba-cli WiFi.AccessPoint.*.MultiAPProfile=3
|
|
|
|
# Increase log level of WHM components
|
|
ba-cli "WiFi.set_trace_zone(zone=genHapd, level=500)"
|
|
ba-cli "WiFi.set_trace_zone(zone=hapdAP, level=500)"
|
|
ba-cli "WiFi.set_trace_zone(zone=chanMgt, level=500)"
|
|
ba-cli "WiFi.set_trace_zone(zone=wpaCtrl, level=500)"
|
|
|
|
# Start the SSH server on WAN
|
|
start_ssh_commands="
|
|
iptables -P INPUT ACCEPT
|
|
killall -9 dropbear
|
|
dropbear -F -T 10 -p192.168.250.180:22 &"
|
|
|
|
sleep 5
|
|
|
|
# Copy generated SSH host keys
|
|
cp /etc/config/ssh_server/*_key /etc/dropbear/
|
|
|
|
# Add command to start dropbear to rc.local to allow SSH access after reboot
|
|
bootscript="/etc/rc.local"
|
|
boot_cmd="sleep 60 && $start_ssh_commands"
|
|
if ! grep -q "$boot_cmd" "$bootscript"; then { head -n -2 "$bootscript"; echo "$boot_cmd"; tail -2 "$bootscript"; } >> btscript.tmp; mv btscript.tmp "$bootscript"; fi
|
|
set +e && eval "$start_ssh_commands"
|