questd: use same Makefile for both Broadcom and Mediatek targets

-------------------------------------------------------------------------------
* 08fb2b8 If image can not be booted from uboot reboot.
-------------------------------------------------------------------------------
commit 08fb2b839326c3bc2a2a0472b5dae6ee0288e483
Author: Kenneth Johansson <kenneth@southpole.se>
Date: 2017-03-21 17:30:56 +0100

    If image can not be booted from uboot reboot.

    Only allow 10 reboots to prevent infinite reboot and write to flash.

Base directory -> /
 board/inteno/ex400/iboot.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)
-------------------------------------------------------------------------------

asterisk-1.8.x-mod/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1
 
-PKG_SOURCE_VERSION:=62c3764e6765fa9b1d22cb5dda26476e4742bdcf
+PKG_SOURCE_VERSION:=fd55c5dc4865142b7955ead96fe93b1ce888c37c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
 
@@ -455,6 +455,8 @@ define Package/asterisk18-mod/install
 	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
 endef
 
 define Package/asterisk18-mod-sounds/install

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+[ "$ACTION" = ifup ] || exit 0
+
+config_load voice_client
+config_get bindintf SIP bindintf
+
+[ "$INTERFACE" == "$bindintf" ] || exit 0
+
+. /lib/functions/network.sh
+
+if [ -n "$bindintf" ]; then
+	network_get_ipaddr bindaddr "$bindintf"
+	bindaddr="${bindaddr:-0.0.0.0}"
+	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
+	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
+fi
+

asterisk-1.8.x-mod/files/asterisk.init

@@ -9,26 +9,9 @@ USE_PROCD=1
 NAME=asterisk
 PROG=/usr/sbin/asterisk
 DEFAULT=/etc/default/asterisk
+CONFDIR=/etc/asterisk
 
 init_asterisk() {
-	# do not start asterisk until the
-	# router receives a default route
-	config_load voice_client
-	local bindintf
-	config_get bindintf SIP bindintf ""
-	if [ "$bindintf" == ""  ]; then
-		while ! ip r | grep -q default; do
-			sleep 1
-		done
-	else
-		network_get_ipaddr ip "$bindintf"
-		while [ "$ip" == "" ]; do
-			sleep 1
-			network_flush_cache
-			network_get_ipaddr ip "$bindintf"
-		done
-	fi
-
 	[ -f $DEFAULT ] && . $DEFAULT
 	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
 	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
@@ -56,6 +39,8 @@ start_service() {
 }
 
 reload_service() {
+	asterisk -rx "config reload $CONFDIR/sip.conf"
+	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"

ated/Makefile

@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2016 inteno
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@private.inteno.se:ated
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -0,0 +1,62 @@
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bashdb
+PKG_VERSION:=4.4-0.92
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
+PKG_SOURCE_URL:=@SF/bashdb/
+PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
+#PKG_CAT:=zcat
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Bash script debugging utility.
+  URL:=http://sourceforge.net/projects/bashdb/
+endef
+
+define Package/$(PKG_NAME)/description
+  Bash script debugging utility.
+endef
+
+define Build/Compile
+        $(MAKE) -C $(PKG_BUILD_DIR) \
+                $(TARGET_CONFIGURE_OPTS) \
+                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
+                        -I./src" \
+                LIBS="$(TARGET_LDFLAGS)" \
+                DESTDIR="$(PKG_INSTALL_DIR)"
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/share
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
+endef
+
+$(eval $(call BuildPackage,bashdb))

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=4.1.0
-PKG_RELEASE:=RC8
+BASE_PKG_VERSION:=4.3.0
+PKG_RELEASE:=RC7
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=5d13d0034c0174cdb6d66f09a458851fe54d810e
+PKG_SOURCE_VERSION:=042e769eb37e0a2a7000b88e7f73e74f50ce52b7
 ifeq ($(CONFIG_ICE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
@@ -45,7 +45,7 @@ endif
 
 ###########################--RELEASE--################################
 
-include $(INCLUDE_DIR)/uclibc++.mk
+#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ice-client/Default
@@ -58,7 +58,7 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
 endef
 
 define Package/ice-client/config

ice-client/files/ice-client.uci_default

@@ -22,8 +22,8 @@ config login
 	list write 'juci-broadcom-iptv'
 	list write 'juci-broadcom-vlan'
 	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-broadcom-wl'
-	list write 'juci-broadcom-wl-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
 	list write 'juci-catv'
 	list write 'juci-ddns'
 	list write 'juci-diagnostics'

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-01-17
+PKG_VERSION:=3.0-2017-03-17
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cfe4253f37e127c9ef405802beeec05d3507cc6a
+PKG_SOURCE_VERSION:=ff91f29aef6aa366db9bfaad20783fef853509e4
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

inbd/Makefile

@@ -0,0 +1,53 @@
+#
+# Copyright (C) 2016 Inteno
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inbd
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=2d474e9ff37b9cfcffd4b9ac8eba8db03eb38a21
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se/inbd
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inbd
+	CATEGORY:=Utilities
+	TITLE:=Inteno Netlink Bridge Daemon
+	URL:=
+	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
+endef
+
+define Package/inbd/description
+	Application handling netlink messages from kernel and sending them out on ubus.
+endef
+
+define Package/inbd/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
+endef
+
+$(eval $(call BuildPackage,inbd))

inteno-netmodes/files/etc/hotplug.d/iface/01-close-ports-repeater

@@ -0,0 +1,39 @@
+[ "$INTERFACE" != "wan" ] && exit
+ip="$(ip a show $DEVICE | awk '/inet / {print $2; exit}')"
+ip="${ip%%/*}"
+
+[ -z "$ip" ] && exit
+
+handle_rule() {
+	local name enabled
+	enabled=$2
+	config_get name $1 name
+	if [ "$name" == "Repeater-Management" ]; then
+		uci set firewall.$1.enabled="$enabled"
+		uci commit firewall
+	fi
+}
+
+set_enabled() {
+	local enabled=$1
+	config_load firewall
+	config_foreach handle_rule rule $enabled
+}
+
+test_ip() {
+	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
+		set_enabled 1
+	else
+		set_enabled 0
+	fi
+}
+	
+
+case "$(uci -q get netmode.setup.curmode)" in
+                repeater|repeater_dualdown)
+			test_ip
+                ;;
+                *)
+			exit
+                ;;
+esac

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -3,24 +3,36 @@
 . /lib/functions.sh
 include /lib/network
 
-[ "$INTERFACE" != "$(uci get layer2_interface_ethernet.Wan.ifname)" ] && exit
+ps | grep hotplug | grep button && exit
+
+WANDEV="eth0.2"
+
+[ "$INTERFACE" != "$WANDEV" ] && exit
+
+defroute=$(ip route | grep default | awk '{print$3}')
 
 case "$(uci get netmode.setup.curmode)" in
-		repeater|repeater_dualdown) echo "Preparing to switch mode" ;;
-		*) exit ;;
+		repeater|repeater_dualdown)
+			echo "Preparing to switch mode"
+		;;
+		*)
+			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
+			exit
+		;;
 esac
 
+echo "0" > /sys/devices/virtual/net/br-wan/bridge/multicast_snooping
+
 get_wifi_wet_interface() {
-#	handle_interface() {
-#		config_get mode "$1" mode
-#		if [ "$mode" == "wet" ] ; then
-#			config_get ifname "$1" ifname
-#			echo "$ifname"
-#		fi
-#	}
-#	config_load wireless
-#	config_foreach handle_interface wifi-iface "$device"
-	echo "wl1"
+	handle_interface() {
+		config_get mode "$1" mode
+		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
+			config_get ifname "$1" ifname
+			echo "$ifname"
+		fi
+	}
+	config_load wireless
+	config_foreach handle_interface wifi-iface "$device"
 }
 
 get_wifi_iface_cfgstr() {
@@ -32,39 +44,43 @@ get_wifi_iface_cfgstr() {
 	config_foreach get_cfgno wifi-iface $1 $2
 }
 
+link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
+
 case "$ACTION" in
 	add|register)
+		[ "$link" == "down" ] && return
 		echo "Autoswitch to Extender mode" > /dev/console
 		sleep 2
+		wetif="$(get_wifi_wet_interface)"
 		# remove wifi client interface
 		case "$(uci get netmode.setup.curmode)" in
-			repeater_dualdown)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=1
-			;;
-			repeater)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=ap
+			repeater*)
+				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
 			;;
 		esac
 		uci commit wireless
 		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $(uci get layer2_interface_ethernet.Wan.ifname) $(uci get network.wan.ifname) | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		ubus call uci commit '{"config":"network"}'
+		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		uci commit network
+		ubus call network reload
+		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
 	;;
 	remove|unregister)
+		[ "$link" == "up" ] && return
 		echo "Autoswitch to Repeater mode" > /dev/console
 		sleep 2
+		wetif="$(get_wifi_wet_interface)"
 		# add wifi client interface
 		case "$(uci get netmode.setup.curmode)" in
-			repeater_dualdown)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=0
-			;;
-			repeater)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=wet
+			repeater*)
+				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
 			;;
 		esac
 		uci commit wireless
 		#remove wan ethernet port
-		uci set network.wan.ifname="$(uci get network.wan.ifname | sed 's/$/ /' | sed -r "s/`uci get layer2_interface_ethernet.Wan.ifname` //g")"
-		ubus call uci commit '{"config":"network"}'
+		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		uci commit network
+		ubus call network reload
+		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
 	;;
 esac

inteno-netmodes/files/etc/init.d/netmode

@@ -72,7 +72,7 @@ populate_netmodes() {
 
 			case "$mode" in
 				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || continue
+					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
 				;;
 			esac
 
@@ -137,12 +137,32 @@ populate_netmodes() {
 
 			json_get_var cred credentials
 			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var ulb uplink_band
+			uci -q set netmode.$mode.uplink_band="$ulb"
 			json_get_var reboot reboot
 			uci -q set netmode.$mode.reboot="$reboot"
 	done
 	uci commit netmode
 }
 
+convert_macros() {
+	local BMAC=$(db -q get hw.board.BaseMacAddr | tr -d ':')
+	local MACLAN=$(printf "%0.12x\n" $((0x$BMAC)))
+	local MACWAN=$(printf "%0.12x\n" $((0x$BMAC + 1)))
+	local BSSID=$(printf "%0.12x\n" $((0x$BMAC + 2)))
+	local BSSID4=$(echo -n $BSSID | tail -c 4 | tr 'a-z' 'A-Z')
+
+	MACLAN=$(echo $MACLAN | sed -e "s/.\{2\}/&:/g")
+	MACWAN=$(echo $MACWAN | sed -e "s/.\{2\}/&:/g")
+
+	MACLAN=${MACLAN:0:17}
+	MACWAN=${MACWAN:0:17}
+
+	grep -q "\$MACLAN" /etc/config/network && sed -i "s/\$MACLAN/$MACLAN/g" /etc/config/network
+	grep -q "\$MACWAN" /etc/config/network && sed -i "s/\$MACWAN/$MACWAN/g" /etc/config/network
+	grep -q "\$BSSID4" /etc/config/network && sed -i "s/\$BSSID4/$BSSID4/g" /etc/config/network
+}
+
 switch_netmode() {
 	[ -f /etc/config/netmode -a -d $modedir ] || return
 
@@ -152,10 +172,27 @@ switch_netmode() {
 	config_get conf $curmode conf
 	cp /etc/netmodes/$conf/* /etc/config/
 	rm -f /etc/config/DETAILS
+	convert_macros
 	sync
+
+	case "$curmode" in
+		repeater|repeater_dualdown)
+			echo "0" > /sys/devices/virtual/net/br-wan/bridge/multicast_snooping
+		;;
+	esac
+
 	local reboot=$(uci -q get netmode.$curmode.reboot)
+	local askcred=$(uci -q get netmode.$curmode.askcred)
 	if [ "$reboot" == "0" ]; then
-		/etc/init.d/enviroment reload
+		#/etc/init.d/enviroment reload
+		if [ "$askcred" == "1" -a -f /tmp/wifi_imported_credentials ]; then
+			wifi import "$(cat /tmp/wifi_imported_credentials)"
+			rm -f /tmp/wifi_imported_credentials
+			ubus call network reload
+			wifi reload nodat
+			sleep 5
+			ubus call router.network reload
+		fi
 	else
 		reboot &
 	fi
@@ -167,6 +204,10 @@ start_service() {
 
 reload_service() {
         switch_netmode
+
+	# set default JUCI page to overview
+	uci -q set juci.juci.homepage="overview"
+	uci commit juci
 }
 
 service_triggers()

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -10,7 +10,8 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301"
+		"CG301",
+		"EX400"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -1,23 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm1.1'
-        option baseifname 'atm1'
-        option atmtype 'ubr'
-        option name 'atm_tv'
-        option vpi '8'
-        option vci '45'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -1,18 +0,0 @@
-
-
-config 'vlan_interface'
-	option name 'eth_tv'
-	option ifname '$WAN.100'
-	option baseifname '$WAN'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'vdsl_tv'
-	option ifname 'ptm0.100'
-	option baseifname 'ptm0'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -10,7 +10,8 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301"
+		"CG301",
+		"EX400"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -1,34 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm1.1'
-        option baseifname 'atm1'
-        option atmtype 'ubr'
-        option name 'atm_tv'
-        option vpi '8'
-        option vci '45'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm2.1'
-        option baseifname 'atm2'
-        option atmtype 'ubr'
-        option name 'atm_voip'
-        option vpi '8'
-        option vci '55'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -1,32 +0,0 @@
-
-
-config 'vlan_interface'
-	option name 'eth_tv'
-	option ifname '$WAN.100'
-	option baseifname '$WAN'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'eth_voip'
-	option ifname '$WAN.200'
-	option baseifname '$WAN'
-	option vlan8021q '200'
-	option vlan8021p '0'
-
-config 'vlan_interface'
-	option name 'vdsl_tv'
-	option ifname 'ptm0.100'
-	option baseifname 'ptm0'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'vdsl_voip'
-	option ifname 'ptm0.200'
-	option baseifname 'ptm0'
-	option vlan8021q '200'
-	option vlan8021p '0'
-

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -1,20 +1,18 @@
 {
 	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
+		{ "en" : "Repeater 5▴▾2.4&5" },
+		{ "sv" : "Repeater 5▴▾2.4&5" }
 	],
 	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 5G & Downlink 2.4G + 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
 	],
 	"excluded_boards" : [
 		"DG15*",
 		"DG40*",
 		"EG40*"
 	],
-	"acl" : [
-		"admin"
-	],
+	"uplink_band": 'a',
 	"credentials" : 1,
 	"reboot" : 0
 }

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -9,12 +9,6 @@ config defaults
 # Uncomment this line to disable ipv6 rules
 #	option disable_ipv6	1
 
-config zone
-	option name		lan
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
 config zone
 	option name		wan
 	list   network		'wan'
@@ -24,10 +18,6 @@ config zone
 	option masq		1
 	option mtu_fix		1
 
-config forwarding
-	option src		lan
-	option dest		wan
-
 # We need to accept udp packets on port 68,
 # see https://dev.openwrt.org/ticket/4108
 config rule

inteno-netmodes/files/etc/netmodes/repeater/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -1,16 +1,41 @@
-
 config interface 'loopback'
-	option is_lan '1'
 	option ifname 'lo'
 	option proto 'static'
 	option ipaddr '127.0.0.1'
 	option netmask '255.0.0.0'
 
+config device 'lan_dev'
+	option name 'eth0.1'
+	option macaddr '$MACLAN'
+
 config interface 'wan'
 	option type 'bridge'
+	option ifname 'eth0.2 eth0.1'
 	option proto 'dhcp'
-	option vendorid 'Inteno_Repeater_$MAC4'
-	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
+	option hostname 'Inteno-$BSSID4'
+	option reqopts '66 67 128 224'
+	option igmp_snooping '0'
+
+config device 'wan_dev'
+	option name 'eth0.2'
+	option macaddr '$MACWAN'
+
+config interface 'wan6'
+	option ifname '@wan'
+	option proto 'dhcpv6'
+
+config switch
+	option name 'switch0'
+	option reset '1'
+	option enable_vlan '1'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '1'
+	option ports '1 6t'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '2'
+	option ports '0 5t'
 

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -4,83 +4,48 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
+config wifi-device  ra0
+	option band b
+	option channel  1
 	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
+	option hwmode   11n
+	option htmode   HT20
+	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
+	option device   ra0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	ra0
+
+config wifi-device  rai0
+	option band a
+	option channel  36
+	option bandwidth '80'
+	option hwmode   11ac
+	option htmode   VHT80
+	option country 'DE'
+	option beamforming 0
+
+config wifi-iface
+	option device   rai0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	rai0
+
+config wifi-iface
+	option device   rai0
+	option network  wan
+	option mode     wet
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	apclii0
 

inteno-netmodes/files/etc/netmodes/repeater_dualdown/DETAILS

@@ -12,9 +12,7 @@
 		"DG40*",
 		"EG40*"
 	],
-	"acl" : [
-		"admin"
-	],
+	"uplink_band": 'b',
 	"credentials" : 1,
 	"reboot" : 0
 }

inteno-netmodes/files/etc/netmodes/repeater_dualdown/firewall

@@ -9,12 +9,6 @@ config defaults
 # Uncomment this line to disable ipv6 rules
 #	option disable_ipv6	1
 
-config zone
-	option name		lan
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
 config zone
 	option name		wan
 	list   network		'wan'
@@ -24,10 +18,6 @@ config zone
 	option masq		1
 	option mtu_fix		1
 
-config forwarding
-	option src		lan
-	option dest		wan
-
 # We need to accept udp packets on port 68,
 # see https://dev.openwrt.org/ticket/4108
 config rule

inteno-netmodes/files/etc/netmodes/repeater_dualdown/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/network

@@ -1,16 +1,41 @@
-
 config interface 'loopback'
-	option is_lan '1'
 	option ifname 'lo'
 	option proto 'static'
 	option ipaddr '127.0.0.1'
 	option netmask '255.0.0.0'
 
+config device 'lan_dev'
+	option name 'eth0.1'
+	option macaddr '$MACLAN'
+
 config interface 'wan'
 	option type 'bridge'
+	option ifname 'eth0.2 eth0.1'
 	option proto 'dhcp'
-	option vendorid 'Inteno_Repeater_$MAC4'
-	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
+	option hostname 'Inteno-$BSSID4'
+	option reqopts '66 67 128 224'
+	option igmp_snooping '0'
+
+config device 'wan_dev'
+	option name 'eth0.2'
+	option macaddr '$MACWAN'
+
+config interface 'wan6'
+	option ifname '@wan'
+	option proto 'dhcpv6'
+
+config switch
+	option name 'switch0'
+	option reset '1'
+	option enable_vlan '1'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '1'
+	option ports '1 6t'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '2'
+	option ports '0 5t'
 

inteno-netmodes/files/etc/netmodes/repeater_dualdown/wireless

@@ -4,98 +4,48 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
+config wifi-device  ra0
+	option band b
+	option channel  1
 	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
+	option hwmode   11n
+	option htmode   HT20
+	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
+	option device   ra0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	ra0
+
+config wifi-device  rai0
+	option band a
+	option channel  36
+	option bandwidth '80'
+	option hwmode   11ac
+	option htmode   VHT80
+	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
-	option device 'wl1'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
+	option device   rai0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	rai0
+
+config wifi-iface
+	option device   ra0
+	option network  wan
+	option mode     wet
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	apcli0
 

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_adsl

@@ -1,13 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/routed/network

@@ -1,29 +1,47 @@
-
 config interface 'loopback'
-	option is_lan '1'
 	option ifname 'lo'
 	option proto 'static'
 	option ipaddr '127.0.0.1'
 	option netmask '255.0.0.0'
 
 config interface 'lan'
-	option is_lan '1'
 	option type 'bridge'
 	option proto 'static'
+	option is_lan '1'
 	option ipaddr '192.168.1.1'
 	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
 	option ip6assign '60'
-	
+	option ifname 'eth0.1 ra0 rai0'
+
+config device 'lan_dev'
+	option name 'eth0.1'
+	option macaddr '$MACLAN'
+
 config interface 'wan'
-	option type 'anywan'
+	option ifname 'eth0.2'
 	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
+	option reqopts '66 67 128 224'
+
+config device 'wan_dev'
+	option name 'eth0.2'
+	option macaddr '$MACWAN'
 
 config interface 'wan6'
-	option proto 'dhcpv6'
 	option ifname '@wan'
+	option proto 'dhcpv6'
+
+config switch
+	option name 'switch0'
+	option reset '1'
+	option enable_vlan '1'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '1'
+	option ports '1 6t'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '2'
+	option ports '0 5t'
 

inteno-netmodes/files/etc/netmodes/routed/wireless

@@ -4,83 +4,37 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
+config wifi-device  ra0
+	option band b
+	option channel  1
 	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
+	option hwmode   11n
+	option htmode   HT20
+	option country 'DE'
+	option beamforming 0
 
 config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
+	option device   ra0
+	option network  lan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+
+config wifi-device  rai0
+	option band a
+	option channel  36
+	option bandwidth '80'
+	option hwmode   11ac
+	option htmode   VHT80
+	option country 'DE'
+	option beamforming 0
+
+config wifi-iface
+	option device   rai0
+	option network  lan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
 

iop/configs/config

@@ -22,7 +22,7 @@ CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
 CONFIG_PACKAGE_ice-client=y
 CONFIG_PACKAGE_ice-client-camerawatch=m
-CONFIG_PACKAGE_ice-client-fileme=m
+# CONFIG_PACKAGE_ice-client-fileme is not set
 CONFIG_PACKAGE_ice-client-gigaset=m
 CONFIG_PACKAGE_ice-client-guest=m
 CONFIG_PACKAGE_ice-client-iperf=m
@@ -31,7 +31,6 @@ CONFIG_PACKAGE_ice-client-monitor=m
 CONFIG_PACKAGE_ice-client-netrounds=m
 CONFIG_PACKAGE_ice-client-rshell=m
 CONFIG_PACKAGE_ice-client-texec=m
-CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_inteno-netmodes=y
 CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
@@ -47,7 +46,7 @@ CONFIG_PACKAGE_juci-broadcom-ethernet=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
 CONFIG_PACKAGE_juci-broadcom-vlan=y
-CONFIG_PACKAGE_juci-broadcom-wl=y
+CONFIG_PACKAGE_juci-wireless=y
 CONFIG_PACKAGE_juci-broadcom-xdsl=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
@@ -56,7 +55,6 @@ CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
 CONFIG_PACKAGE_juci-inteno-backup=y
 CONFIG_PACKAGE_juci-inteno-multiwan=y
@@ -72,7 +70,7 @@ CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-owsd=y
 CONFIG_PACKAGE_juci-printer=y
-CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
@@ -85,8 +83,6 @@ CONFIG_PACKAGE_juci-utils=y
 CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_layer2interface=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
 CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
@@ -123,8 +119,6 @@ CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_samba3=y
-CONFIG_PACKAGE_samba3-nmbd=y
 CONFIG_PACKAGE_snmpd=y
 CONFIG_PACKAGE_strace=y
 CONFIG_PACKAGE_tc=y

iop/scripts/feeds_update.sh

@@ -25,11 +25,6 @@ function feeds_update {
 	./scripts/feeds update
     fi
 
-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-	./scripts/feeds install -f -p feed_inteno_openwrt -a
-    fi
-
     # targets need to be installed explicitly
     ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-mips
     ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-arm

iop/scripts/update_package.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-UPDATE=0
+
 
 print_git_update()
 {
@@ -399,9 +399,13 @@ check_packages()
     echo "Now checking if any changes has been done to the packages."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
+    # only scan in the build directory that is currently in use.
+    CPU=$(grep  "CONFIG_CPU_TYPE=" .config| cut -f2 -d\")
+    LIBC=$(grep "CONFIG_LIBC=" .config| cut -f2 -d\")
+    
     # First scan all files in build dir for packages that have .git directories.
-    all_pkgs=$(find build_dir/ -name ".git")
-
+    all_pkgs=$(find build_dir/*${CPU}*${LIBC}* -name ".git")
+    
     for pkg in `echo "$all_pkgs"`
     do
 	pkg=$(dirname $pkg)
@@ -423,7 +427,7 @@ check_packages()
 		    #  print_git_update
 		    git_repos_uptodate
 		    insert_hash_in_feed_makefile
-		    [ "${UPDATE}" ] && insert_version_in_feed_makefile
+		    [ ${UPDATE} -eq 1 ] && insert_version_in_feed_makefile
 		    create_message >tmp/msg
 		    commit_feed tmp/msg
 		    insert_hash_in_feeds_config
@@ -487,7 +491,7 @@ Date: %ai%n\
 check_feeds()
 {
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes has been done to the feeds."
+    echo "Now checking if any changes have been done to the feeds."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
     feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
@@ -582,6 +586,7 @@ usage(){
 # Exported interface
 function update_package {
 
+    UPDATE=0
     Color_Off='\033[0m'       # Text Reset
 
     # Regular Colors

iup/files/etc/init.d/iup

@@ -31,19 +31,16 @@ management_interfaces() {
 }
 
 init_iup() {
+	local polling_enabled
 	local interval
 	local starttime
 	local nummber
 	number=$RANDOM
 
-	if [ -f $CRONPATH ]; then
-		echo "File $CRONPATH exists"
-	else
-		echo  "File $CRONPATH did not exists"
-		touch $CRONPATH
-	fi
+	[ -f $CRONPATH ] || touch $CRONPATH
 
 	config_load provisioning
+	config_get polling_enabled polling enabled on
 	config_get interval  polling  interval
 	config_get starttime  polling  starttime
 
@@ -54,12 +51,12 @@ init_iup() {
 		local newreqopts=
 		local baseopts=
 		local reqopts="$(uci -q get network.$net.reqopts)"
-		local iupopts="66 67 128 224"
+		local iupopts="66 67 128 224 225 226"
 		local ropt iopt
 		config_get enabled iup enabled "on"
 		for ropt in $reqopts; do
 			case $ropt in
-				66|67|128|224) ;;
+				66|67|128|224|225|226) ;;
 				*) baseopts="$baseopts $ropt" ;;
 			esac
 		done
@@ -67,7 +64,7 @@ init_iup() {
 		reqopts="$baseopts $iupopts"
 		for ropt in $reqopts; do
 			case $ropt in
-				66|67|128|224) [ $enabled == "on" ] && newreqopts="$newreqopts $ropt" ;;
+				66|67|128|224|225|226) [ $enabled == "on" ] && newreqopts="$newreqopts $ropt" ;;
 				*) newreqopts="$newreqopts $ropt" ;;
 			esac
 		done
@@ -82,8 +79,18 @@ init_iup() {
 	ubus call network reload
 	#################################################################
 
+	if [ $polling_enabled == "off" ]; then
+		sed -i "/\/sbin\/iup/d" $CRONPATH
+		logger -s -t /etc/init.d/iup[$$] "Provisioning polling unscheduled" 2>/dev/console
+		return
+	fi
+
+	local log_hour=$starttime
+	local log_minute
+	local log_interval=$interval
 	if [ $interval == "weekly" ]; then
 		interval="0"
+		log_interval="$log_interval/sunday"
 	elif [ $interval == "hourly" ]; then
 		interval='*'
 		starttime='*'
@@ -91,9 +98,7 @@ init_iup() {
 		interval='*'
 	fi
         let "number %= $RANGE"
-	if grep -q "$starttime  \* \* \\$interval     /sbin/iup" "$CRONPATH" ; then
-		echo "IUP is scheduled $starttime  \* \* \\$interval "
-	else 
+	if ! grep -q "$starttime  \* \* \\$interval     /sbin/iup" "$CRONPATH" ; then
 		if grep -q "iup" "$CRONPATH" ; then
 			sed -i "/iup/d" $CRONPATH
 		fi
@@ -101,15 +106,14 @@ init_iup() {
 		fsync $CRONPATH
 		/etc/init.d/cron restart
 	fi
+	log_minute=$(awk '/\/sbin\/iup/ {print $1}' /etc/crontabs/root)
+	logger -s -t /etc/init.d/iup[$$] "Provisioning is scheduled at $log_hour:$log_minute $log_interval" 2>/dev/console
 }
 
 start_service() {
 	init_iup
 
-	test_default_route
-	if [ "$?" -eq 0 ]; then
-		/sbin/iup -v &
-	fi
+	/sbin/iup -v &
 }
 
 stop_service() {

iup/files/sbin/iup

@@ -13,6 +13,8 @@ export IUPCONFFILES=/tmp/iup/sysupgrade.conffiles.tar.gz
 export IUPMD5=/etc/configchecksums
 export CONFILESLURP='/tmp/iup/*.conf'
 export IUPTEMP="/tmp/iup"
+export IUPUSERCFG="/tmp/iupusercfg"
+export IUPUSERCFG_WIFI="/tmp/iupusercfg_wifi"
 export INTERACTIVE=0
 export VERBOSE=0
 export CONF=1
@@ -26,28 +28,22 @@ MAC=${MAC// /}
 #lower to upper Conversion
 MAC=$(echo $MAC | tr '[a-z]' '[A-Z]')
 
+# no verbose:	no output
+# -v		log to system log
+# -v -v		log to system log and console
+# -v -v -v	log to system log, console and stderr
 v() {
-	[ "$VERBOSE" -ge 1 ] && logger -t iup "$@"
+	[ "$VERBOSE" -eq 0 ] && return
+	[ "$VERBOSE" -eq 1 ] && logger -t $0[$$] "$@" && return
+	[ "$VERBOSE" -eq 2 ] && logger -s -t $0[$$] "$@" >/dev/console 2>&1 && return
+	[ "$VERBOSE" -eq 3 ] && logger -s -t $0[$$] "$@" 2>&1 | tee /dev/console && return
 }
 
-if [ -f $IUPMD5 ]; then
-	v "File $IUPMD5 exists"
-else
-	v "File $IUPMD5 did not exists"
-	touch $IUPMD5
-fi
+vv() {
+	VERBOSE="$(($VERBOSE + 1))"
+	v "$@"
+	VERBOSE="$(($VERBOSE - 1))"
 
-handle_ucitrack()
-{
-	local config="$1"
-	config_get init "$config" init
-	echo $init
-	config_get affects "$config" affects
-
-	for aff in $affects
-	do
-		config_foreach handle_ucitrack $aff
-	done
 }
 
 get_packages()
@@ -61,35 +57,121 @@ get_packages()
 
 reload ()
 {
-	local reload
-	local initlist
-	local reload
 	local pack
 	pack=$(get_packages $1)
-	config_load ucitrack
+	v "Calling ubus call uci commit for $pack"
 	for packname in $pack
 	do
-		initlist=$(config_foreach handle_ucitrack $packname)
-		for reltest in $initlist
-		do
-			case $reload in
-				*" $reltest "*) v "already added to reload $reltest" ;;
-				*) reload="$reload"" ""$reltest" ;;
-			esac
-		done
+		ubus call uci commit '{"config":"'$packname'"}'
+		sleep 1
 	done
-	v "Init scripts to be run $reload"
-	for inittoreload in $reload
-	do
-		if [ "$inittoreload" != "iup" ]; then
-			/etc/init.d/$inittoreload restart
-		fi
+}
+
+save_usercfg()
+{
+	rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
+	touch $IUPUSERCFG $IUPUSERCFG_WIFI
+
+	# save the firewall redirects/port forwarding
+	uci show firewall | grep redirect >> $IUPUSERCFG
+
+	# save the parental rules
+	local parentalrules=$(uci show firewall | grep -i "Parental Rule" | grep -o "rule\[.*\]")
+	for rule in $parentalrules ; do
+		rule=${rule//\[/\\[} # escape [
+		rule=${rule//]/\]} # escape ]
+		uci show firewall | grep "$rule" >>$IUPUSERCFG
 	done
-	#Ugly hack need to figure out something here
-	test_default_route
-	if [ "$?" -eq 1 ]; then
-		sleep 5
+
+	# tranfsorm the output of uci show into a uci script
+
+	# prepend "set" to each line NOT containing "]="
+	# firewall.@redirect[0].enabled='1' becomes
+	# set firewall.@redirect[0].enabled='1'
+	sed -i '/.*]=.*/! s/.*/set \0/' $IUPUSERCFG
+
+	# prepend "add" to each line containing "]="
+	# AND keep only the package name (before the first dot) and section type (after equal)
+	# firewall.@redirect[0]=redirect becomes
+	# add firewall redirect
+	sed -i 's/\(.*\)\..*]=\(.*\)/add \1 \2/' $IUPUSERCFG
+
+	# change all the array indexes to [-1]
+	sed -i 's/\[.\?.\?.\?.\?\]/[-1]/' $IUPUSERCFG
+
+	# commit at the end of the script
+	[ -s $IUPUSERCFG ] && echo "commit" >> $IUPUSERCFG
+
+	# save wireless interfaces
+	uci show wireless | grep "wifi-iface" > $IUPUSERCFG_WIFI
+}
+
+apply_usercfg()
+{
+	# decide to save the user changes based on keepuserconfig received through provisioning
+	local keep
+	config_load provisioning
+	config_get_bool keep configserver keepuserconfig "0"
+	v "apply_usercfg(): keepuserconfig = $keep"
+	if [ "$keep" != "1" ] ; then
+		rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
+		return
 	fi
+
+	local index ifname network
+	local newindex newifname newnetwork
+
+	# loop through all the user wifi-ifaces
+	for index in $(seq 0 99) ; do
+		ifname=$(sed -n 's/.*wifi-iface\['$index'\]\.ifname='\''\(.*\)'\''/\1/p' $IUPUSERCFG_WIFI )
+		[ "$ifname" ] || break
+		network=$(sed -n 's/.*wifi-iface\['$index'\]\.network='\''\(.*\)'\''/\1/p' $IUPUSERCFG_WIFI )
+
+		newindex=""
+		newifname=""
+		newnetwork=""
+
+		# loop through all the newly configured wifi-ifaces
+		for newindex in $(seq 0 99) ; do
+			newifname=$( uci show wireless | grep wifi-iface | sed -n 's/.*wifi-iface\['$newindex'\]\.ifname='\''\(.*\)'\''/\1/p' )
+			if [ -z "$newifname" ] ; then
+				# no newifname means that all the wifi-ifaces have already been parsed
+				newindex="-1"
+				break
+			fi
+			newnetwork=$(uci show wireless | grep wifi-iface | sed -n 's/.*wifi-iface\['$newindex'\]\.network='\''\(.*\)'\''/\1/p' )
+
+			# two wifi interfaces are the same if "ifname" and "network" are the same
+			if [ "$newifname" == "$ifname" ] && [ "$newnetwork" == "$network" ] ; then
+				break
+			fi
+		done
+
+		# prepend "set" to each line NOT containing "]="
+		# wireless.@wifi-iface[$index].<option>='<value>' becomes
+		# set wireless.@wifi-iface[$index].<option>='<value>'
+		sed -i '/.*]=.*/! s/\(.*\[\)'$index'\(\].*\)/set \1'$newindex'\2/' $IUPUSERCFG_WIFI
+
+		if [ "$newindex" == "-1" ] ; then
+			# prepend "add" to each line containing "]="
+			# AND keep only the package name (before the first dot) and section type (after equal)
+			# wireless.@wifi-iface[0]=wifi-iface becomes
+			# add wireless wifi-iface
+			sed -i 's/\(.*\)\..*\['$index'\]=\(.*\)/add \1 \2/' $IUPUSERCFG_WIFI
+		else
+			# no need to create a new uci section, just delete the line defining a new section
+			sed -i '/\(.*\)\..*\['$index'\]=\(.*\)/d' $IUPUSERCFG_WIFI
+		fi
+
+	done
+	# commit at the end of the script
+	[ -s $IUPUSERCFG_WIFI ] && echo "commit" >> $IUPUSERCFG_WIFI
+
+	# run the uci batch scripts
+	cat $IUPUSERCFG | uci batch >/dev/null 2>&1
+	cat $IUPUSERCFG_WIFI | uci batch >/dev/null 2>&1
+
+	rm -f $IUPUSERCFG $IUPUSERCFG_WIFI
 }
 
 handle_provisioning() {
@@ -117,15 +199,15 @@ handle_provisioning() {
 	config_get deckey "$config" deckey
 	if [ "$enabled" -eq 1	]; then
 		if [ "$config" == "iup" ]; then
-			v "using url from dhcp options"
+			v "Using url received in dhcp options"
 			config_get url "$config" urliup
-		else 
+		else
 			config_get url "$config" url
 		fi
 		url=${url//\$MAC/$MAC}
-		v "Download from $url"
-		  
-		while [ $retry -le $RETRYSTOP ]  
+		v "Downloading from url \"$url\""
+
+		while [ $retry -le $RETRYSTOP ]
 		do
 		  if [ ${url%%:*} == "tftp" ]; then
 			tftpfile=${url#*\/\/}
@@ -137,10 +219,10 @@ handle_provisioning() {
 			get_image "$url" "cat" > $IUPCONFFILES
 		  fi
 		  if [ -s $IUPCONFFILES ]; then
-			v "File Downloaded"
+			v "Download finished"
 			retry=$((RETRYSTOP + 1))
-		  else		  
-		  v "Download failed will try again in $incsleep sec"
+		  else
+		  v "Download failed, retrying in $incsleep seconds"
 		  sleep $incsleep
 		  incsleep=$((incsleep * retry + number))
 		  retry=$((retry+1))
@@ -163,41 +245,44 @@ handle_Downloaded_file()
 	[ -n "$1" ] && DECKEY=$(echo $1 | tr -d '\n' | hexdump -e '16/1 "%02x"')
 	KEY=${DECKEY:-$DESKEY}
 	local img_type
-	case "$(get_image_type "$IUPCONFFILES")" in                                  
-                "INTENO") img_type=2 ;;                                      
-                "CFE+FS") img_type=1 ;;                                         
-                "FS")     img_type=0 ;;                                      
-                *)      img_type="UNKNOWN";;                                
-        esac                                                                                     
-                                                                                                 
+	case "$(get_image_type "$IUPCONFFILES")" in
+                "INTENO") img_type=2 ;;
+                "CFE+FS") img_type=1 ;;
+                "FS")     img_type=0 ;;
+                *)      img_type="UNKNOWN";;
+        esac
+
         if [ "$img_type" == "UNKNOWN" ] ; then
 		case "$(hexdump -v -n 2 -e '1/1 "%02x"' $IUPCONFFILES)" in
 			1f8b)
-				v "Found Config"
+				v "Downloaded file is an unencrypted config"
 				md5=$(md5sum $IUPCONFFILES)
 				md5="${md5%% *}" # remove the first space and everything after it
 				md5sum "$IUPCONFFILES" >> "$IUPMD5.temp"
 				if grep -q "$md5" "$IUPMD5"; then
-					v "Config Already Up to Date"
-					#becuse config is up to date we need to disable last step reboot if set
+					v "Config is already up to date, nothing to do"
+					#because config is up to date we need to disable last step reboot if set
 					reboot="off"
 					rm -rf $IUPTEMP
 				else
-					cd /tmp/iup/
+					save_usercfg
+					cd $IUPTEMP
 					tar xvzf $IUPCONFFILES
 					for f in $CONFILESLURP
 					do
-						v "file to be applied $f and config $(cat $f)"
+						v "File to be applied $f and config $(cat $f)"
 						uci import -f $f
 					done
 					pack=$(get_packages $CONFILESLURP)
-					v "$pack packages to be commited"
+					v "Packages to be commited: $pack"
 					for packname in $pack
 					do
 						uci commit $packname
 					done
+					apply_usercfg
 					reboot=`uci -q  get provisioning.configserver.reboot`
 					if [ "$reboot" != "on" ]; then
+						sync
 						reload $CONFILESLURP
 					fi
 					rm -rf $IUPTEMP
@@ -207,11 +292,11 @@ handle_Downloaded_file()
 				fi
 			;;
 			*)
-				v "encrypted"
+				v "Downloaded file is an encrypted config"
 				if [ $KEY ]; then
 					openssl enc -d -des-ede -nosalt -K $KEY -iv "0000000000000000" -in $IUPCONFFILES -out $IUPCONFFILES.tmp
 					if [ $? -eq 0 ]; then
-						v "Decrypted Content"
+						v "Decryption successful"
 						mv $IUPCONFFILES.tmp $IUPCONFFILES
 						handle_Downloaded_file
 					else
@@ -227,11 +312,12 @@ handle_Downloaded_file()
 			;;
 		esac
 	else
-		v "Image found will start flashing"
+		v "Downloaded file is a firmware, will start reflashing"
 		if [ "$defaultreset" -eq 1 ]; then
-			v "nuke config"
+			v "Not saving configuration over reflash"
 			 /sbin/sysupgrade -v -n $IUPCONFFILES
 		else
+			v "Saving configuration over reflash"
 			/sbin/sysupgrade -v $IUPCONFFILES
 		fi
 	fi
@@ -253,7 +339,7 @@ change_to_vlan() {
 
 	# bring down old interface/device.
 	ifdown "${base_dev}"
-	logger -t dhcp_opt132 "bringing down old if: ${base_dev}"
+	v "option 132: bringing down old if: ${base_dev}"
 
 	# extract base name of device.
 	base_dev=$(echo ${base_dev} | cut -d. -f1)
@@ -267,15 +353,15 @@ change_to_vlan() {
 	uci set layer2_interface_vlan.@vlan_interface[-1].baseifname=${base_dev}
 	# and commit the change.
 	uci commit layer2_interface_vlan
-	logger -t dhcp_opt132 "committed update to file layer2_interface_vlan"
+	v "option 132: committed update to file layer2_interface_vlan"
 
 	# reload configuration files.
 	/etc/init.d/layer2_interface_vlan reload
-	logger -t dhcp_opt132 "reload layer2_interface_vlan config"
+	v "option 132: reload layer2_interface_vlan config"
 
 	# replace old interface (like eth0.1 with new eth0.101).
 	wan_if=$(uci get network.$3.ifname)
-	logger -t dhcp_opt132 "old network.${3}.ifname: $wan_if"
+	v "option 132: old network.${3}.ifname: $wan_if"
 
 	# loop through the string, remove any word close to "base_dev".
 	for word in ${wan_if}; do
@@ -293,10 +379,12 @@ change_to_vlan() {
 	uci set network.wan.ifname="${new_wan_if}"
 	# and commit the change.
 	uci commit network
-	logger -t dhcp_opt132 "committed update to file network: ifname=${new_wan_if}"
+	v "option 132: committed update to file network: ifname=${new_wan_if}"
 
 	# reboot into new if configuration.
-	reboot
+	vv "Rebooting"
+	export REBOOT_REASON=iup
+	/sbin/reboot
 }
 
 handle_option224()
@@ -347,69 +435,67 @@ handle_option224()
 	softwareminuspath=${url##*/}
 
 	if [ $url ] && [ $active -eq 1 ]; then
-		echo "Software version to download $softwareminuspath"
+		v "Software version to download \"$softwareminuspath\""
 		local sysinfo=$(ubus call router.system info)
 		json_load "$sysinfo"
 		json_select system
 		json_get_var firmware firmware
 		local firmware_new=${softwareminuspath%.*}	# remove extension (.w, .y or .y2) from filename
 		if [ "$firmware_new" != "$firmware" ] ; then
-			echo "Image found $url will start flashing"
+			v "Firmware found $url will start flashing"
+			v "Currently running firmware: \"$firmware\""
+			v "Newly received firmware:    \"$firmware_new\""
 			wait_for_dns $url
+			v "Start flashing"
 			/sbin/sysupgrade -v $url &
 			return 1
 		else
-			echo "Will not update software, already up to date"
+			v "Firmware is up to date, nothing to do"
 			return 0
 		fi
 	fi
 }
 
-### MAIN ###
-while [ -n "$1" ]; do
-	case "$1" in
-		-v) export VERBOSE="$(($VERBOSE + 1))";;
-		-q) export VERBOSE="$(($VERBOSE - 1))";;
-		-*)
-			echo "Invalid option: $1"
-			exit 1
-		;;
-		*) break;;
-	esac
-	shift;
-done
 
-# Process IUP related DHCP options #
-if [ -n "$1" ]; then
+parse_dhcp_options()
+{
+	local the_json="$@"
+	# Process IUP related DHCP options #
 	local privopt224 privopt225 privopt226 vendorspecinf httpurl128
 	local tftp bootfile vlanid vlanpriority interface
 
-	json_load "$1"
+	json_load "$the_json"
 	json_get_var interface interface
 	json_get_var privopt224 privopt224
 	json_get_var privopt225 privopt225
 	json_get_var privopt226 privopt226
-	json_get_var vendorspecinf vendorspecinf
+	json_get_var vendorspecinf vendorspecinf # option 43
 	json_get_var httpurl128 httpurl128
-	json_get_var tftp tftp
-	json_get_var bootfile bootfile
-	json_get_var vlanid vlanid
-	json_get_var vlanpriority vlanpriority
+	json_get_var tftp tftp # option 66
+	json_get_var bootfile bootfile #option 67
+	json_get_var vlanid vlanid # option 132
+	json_get_var vlanpriority vlanpriority # option 133
+
+	v "Processing dhcp options"
 
 	if [ $privopt224 ]; then
-		echo "Option224 recived " $privopt224 > /dev/console
+		v "dhcp option 224 firmware url $privopt224"
 		handle_option224 $privopt224
 		[ $? -eq 1 ] && exit
 	fi
 
 	if [ $vendorspecinf ]; then
+		v "dhcp option 43 tr69 url $vendorspecinf"
 		url=${vendorspecinf%%,*}; rest=${vendorspecinf#*,}
 		provisioningcode=${rest%%,*};
+		uci_set_state provisioning iup urlcwmp "$url"
 		uci_set_state provisioning iup url "$url"
 		uci_set_state provisioning iup provisioningcode "$provisioningcode"
 	elif [ $httpurl128 ]; then
+		v "dhcp option 128 http config url $httpurl128"
 		uci_set_state provisioning iup urliup "$httpurl128"
 	elif [ $tftp ]; then
+		v "dhcp option 66 tftp config url $tftp"
 		if [ ${bootfile:0:1} == '/' ]; then
 			uci_set_state provisioning iup urliup "tftp://$tftp$bootfile"
 		else
@@ -417,17 +503,17 @@ if [ -n "$1" ]; then
 		fi
 	fi
 
-	# if we get vlanid and maybe vlanpriority, configure for that.
+	# vlanid (and vlanpriority)
 	if [ -n "$vlanid" -a -n "$vlanpriority" ]; then
-		logger -t dhcp_opt132 "vlanid: ${vlanid}, vlanpriority: ${vlanpriority}"
+		v "dhcp option 132 vlanid: ${vlanid} vlanpriority: ${vlanpriority}"
 		change_to_vlan ${vlanid} ${vlanpriority} ${interface}
 	elif [ -n "$vlanid" ]; then
-		logger -t dhcp_opt132 "vlanid: ${vlanid}"
+		v "dhcp option 132 vlanid: ${vlanid}"
 		change_to_vlan ${vlanid} 0 ${interface}
 	elif [ -n "$privopt225" ] || [ -n "$privopt226" ]; then
 		# opt225 and opt226 can be used together or separatly
 		if [ -n "$privopt225" ]; then
-			echo "dhcp option 225: $privopt225" >/dev/console
+			v "dhcp option 225: $privopt225"
 			# option225 is allowd to change only once per CPE
 			if [ "$(uci get -q ice.cloud.frozen)" != "1" ] ; then
 				uci set ice.cloud.frozen="1"
@@ -436,69 +522,137 @@ if [ -n "$1" ]; then
 			fi
 		fi
 		if [ -n "$privopt226" ]; then
-			echo "dhcp option 226: $privopt226" >/dev/console
+			v "dhcp option 226: $privopt226"
 			[ -z "$(uci get -q ice.dhcp)" ] && uci set ice.dhcp="dhcp"
 			uci set ice.dhcp.opt226connectionid="$privopt226"
 			ubus send dhcp.opt226connectionid '{"opt226connectionid":"","value":"'$privopt226'"}'
 		fi
 		uci commit
 	fi
+}
 
-	exit 0
-fi
+# wait_for_default_gateway to become reachable
+# return 0 if the default gateway is reachable
+# return 1 if the default gateway is not reachable after $wait_time
+wait_for_default_gateway()
+{
+	local gateway
+	local device
+	local wait_time=120
+	local wait_interval=10
 
-local iupurl
-local configurl
-local software
-local sofwareminuspath
+	while [ true ] ; do
 
-config_load provisioning
-#check if iup should be used or if its overridden by /etc/config
-config_get configurl configserver	url
-config_get reboot configserver reboot
-config_get iupurl iup	urliup
+		gateway=""
+		device=""
+		network_flush_cache
+		network_get_gateway gateway wan #true
+		network_get_device device wan
+		device="${device:+-I }$device"
+		if ping -q -w 1 -c 1 $device $gateway >/dev/null 2>&1 ; then
+			[ "$wait_time" -lt "60" ] && v "Default gateway $gateway is reachable"
+			sleep $wait_interval
+			return 0
+		fi
 
-if [ $configurl ]; then
-	handle_provisioning configserver "0"
-elif [ $iupurl ]; then
-	handle_provisioning iup "1"
-else
-	v "No Provisioning Server Found"
-	exit
-fi
+		v "Waiting for default gateway. Countdown $wait_time seconds"
+		sleep $wait_interval
+		wait_time=$((wait_time - wait_interval))
+		[ "$wait_time" -le "0" ] && break # timer expired
+	done
 
-config_load provisioning
-config_foreach handle_provisioning subconfig "0"
-config_get software uppgradeserver url
-sofwareminuspath=${software##*/}
-v "Software version to download $sofwareminuspath"
+	return 1 # default gateway not reachable
+}
 
-if [ $software ]; then
-	local sysinfo=$(ubus call router.system info)
-	json_load "$sysinfo"
-	json_select system
-	json_get_var firmware firmware
-	json_get_var filesystem filesystem                                  
-        if [ "$filesystem" == "JFFS2" ] ; then                               
-                firmware=$firmware.w                                                                                                           
-        else                                                                 
-                firmware=$firmware.y                                         
-        fi     
-	if [ "$sofwareminuspath" == "${sofwareminuspath/$firmware/}" ] ; then
-		echo $software
-		handle_provisioning uppgradeserver "0"
-	else
-		v "Will not update software, already up to date"
+
+main()
+{
+
+	while [ -n "$1" ]; do
+		case "$1" in
+			-v) export VERBOSE="$(($VERBOSE + 1))";;
+			-q) export VERBOSE="$(($VERBOSE - 1))";;
+			--dhcp-options)
+				shift
+				parse_dhcp_options "$@"
+				exit 0
+				;;
+			-*)
+				echo "Invalid option: $1"
+				exit 1
+			;;
+			*) break;;
+		esac
+		shift;
+	done
+
+	if ! wait_for_default_gateway ; then
+		v "Default gateway is not reachable. Aborting iup."
+		exit 1
 	fi
-fi
 
-if [ $CONF -eq 1 ]; then
-	mv "$IUPMD5.temp" $IUPMD5
-fi
+	if [ ! -f $IUPMD5 ]; then
+		v "Creating file $IUPMD5"
+		touch $IUPMD5
+	fi
 
-if [ "$reboot" == "on" ]; then
-	v "Reboot Signaled"
-	/sbin/reboot
-fi
 
-rm -rf /var/run/iup.pid
+	local iupurl
+	local configurl
+	local software
+	local sofwareminuspath
+
+	config_load provisioning
+	#check if iup should be used or if its overridden by /etc/config
+	config_get configurl configserver	url
+	config_get reboot configserver reboot
+	config_get iupurl iup	urliup
+
+	if [ $configurl ]; then
+		handle_provisioning configserver "0"
+	elif [ $iupurl ]; then
+		handle_provisioning iup "1"
+	else
+		v "No provisioning server configured"
+		exit
+	fi
+
+	config_load provisioning
+	config_foreach handle_provisioning subconfig "0"
+	config_get software uppgradeserver url
+	sofwareminuspath=${software##*/}
+
+	if [ $software ]; then
+		v "Software version to download \"$sofwareminuspath\""
+		local sysinfo=$(ubus call router.system info)
+		json_load "$sysinfo"
+		json_select system
+		json_get_var firmware firmware
+		json_get_var filesystem filesystem
+	        if [ "$filesystem" == "JFFS2" ] ; then
+	                firmware=$firmware.w
+		else
+			firmware=$firmware.y
+		fi
+		if [ "$sofwareminuspath" == "${sofwareminuspath/$firmware/}" ] ; then
+			v "Software \"$software\""
+			handle_provisioning uppgradeserver "0"
+		else
+			v "Will not update software, already up to date"
+		fi
+	fi
+
+	if [ $CONF -eq 1 ]; then
+		mv "$IUPMD5.temp" $IUPMD5
+	fi
+
+	if [ "$reboot" == "on" ]; then
+		vv "Rebooting"
+		export REBOOT_REASON=iup
+		/sbin/reboot
+	fi
+
+	rm -rf /var/run/iup.pid
+}
+
+main $@

layer2interface/Makefile

@@ -29,8 +29,14 @@ endef
 define Build/Compile
 endef
 
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
 define Package/layer2interface/install
 	$(CP) ./broadcom/* $(1)/
 endef
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+define Package/layer2interface/install
+	$(CP) ./broadcom/* $(1)/
+endef
+endif
 
 $(eval $(call BuildPackage,layer2interface))

layer2interface/broadcom/lib/network/brcmwifi.sh

@@ -156,11 +156,22 @@ wlmngr_startServices() {
 
 enableBSD() {
 	local wdev wdev_to_steer
+	local enabled policy
+	local rssi_threshold bw_util
 
 	nvram set bsd_role=0
 	nvram unset bsd_ifnames
 
-	[ "$(uci -q get wireless.status.bandsteering)" == "1" ] || return 1
+	enabled="$(uci -q get wireless.bandsteering.enabled)"
+
+	[ "$enabled" == "1" ] || return 1
+
+	policy="$(uci -q get wireless.bandsteering.policy)"
+	policy=${policy:-0}
+	rssi_threshold="$(uci -q get wireless.bandsteering.rssi_threshold)"
+	rssi_threshold=${rssi_threshold:--75}
+	bw_util="$(uci -q get wireless.bandsteering.bw_util)"
+	bw_util=${bw_util:--60}
 
 	nvram set bsd_role=3
 	nvram set bsd_pport=9878
@@ -169,30 +180,52 @@ enableBSD() {
 	nvram set bsd_primary=192.168.1.1
 	nvram set bsd_scheme=2
 	nvram set bsd_poll_interval=1
-	nvram set bsd_bounce_detect="180 8 3600"
+	nvram set bsd_bounce_detect="180 2 3600"
 	nvram set bsd_msglevel=0
 	nvram set bsd_status_poll=5
 	nvram set bsd_status=3
+	nvram set bsd_actframe=1
+	nvram set bsd_steer_no_deauth=1
 
 	for wdev in wl0 wl1; do
 		#if [ "$(uci -q get wireless.$wdev.band_steering)" == "1" ]; then
 			nvram set bsd_ifnames="$(nvram get bsd_ifnames) $wdev"
 			[ "$wdev" == "wl0" ] && wdev_to_steer="wl1" || wdev_to_steer="wl0"
 
-			if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
-				# 2.4G
-				nvram set ${wdev}_bsd_if_quality_policy="0 0x0 -100"
-				nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-				nvram set ${wdev}_bsd_sta_select_policy="10 0 0 0 1 1 0 0 0 0x400"
-				nvram set ${wdev}_bsd_steer_prefix=$wdev
-				nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x1"
+			if [ "$policy" == "0" ]; then
+				# RSSI Threshold based policy #
+				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
+					# 2.4G
+					nvram set ${wdev}_bsd_if_qualify_policy="0 0x0"
+					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
+					nvram set ${wdev}_bsd_sta_select_policy="20 -60 0 0 1 0 0 0 0 0x42"
+					nvram set ${wdev}_bsd_steer_prefix=$wdev
+					nvram set ${wdev}_bsd_steering_policy="0 0 0 -60 0 0x52"
+				else
+					# 5G
+					nvram set ${wdev}_bsd_if_qualify_policy="30 0x0"
+					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
+					nvram set ${wdev}_bsd_sta_select_policy="20 $rssi_threshold 0 0 1 0 0 0 0 0x40"
+					nvram set ${wdev}_bsd_steer_prefix=$wdev
+					nvram set ${wdev}_bsd_steering_policy="80 5 3 $rssi_threshold 0 0x40"
+				fi
 			else
-				# 5G
-				nvram set ${wdev}_bsd_if_quality_policy="20 0x0 -75"
-				nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-				nvram set ${wdev}_bsd_sta_select_policy="100 0 0 0 0 1 0 0 0 0x40"
-				nvram set ${wdev}_bsd_steer_prefix=$wdev
-				nvram set ${wdev}_bsd_steering_policy="80 5 3 -75 0 0x40"
+				# Bandwidth Usage based policy #
+				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
+					# 2.4G
+					nvram set ${wdev}_bsd_if_qualify_policy="0 0x0 -75"
+					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
+					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x600"
+					nvram set ${wdev}_bsd_steer_prefix=$wdev
+					nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x10"
+				else
+					# 5G
+					nvram set ${wdev}_bsd_if_qualify_policy="40 0x0 -75"
+					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
+					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x240"
+					nvram set ${wdev}_bsd_steer_prefix=$wdev
+					nvram set ${wdev}_bsd_steering_policy="$bw_util 5 3 0 0 0x40"
+				fi
 			fi
 		#fi
 	done
@@ -320,11 +353,11 @@ wlmngr_finalize() {
 
 	# RADAR THRESHOLD VALUES #
 	local pcid="$(wlctl -i wl$idx revinfo | awk 'FNR == 2 {print}' | cut -d'x' -f2)"
-#	local isac="$(db get hw.$pcid.is_ac)"
-#	if [ "$isac" == "1" ]; then
-#		wlctl -i $device msglevel +radar +dfs
-#		#dhdctl -i $device dconpoll 200
-#	fi
+	local isac="$(db get hw.$pcid.is_ac)"
+	if [ "$isac" == "1" ]; then
+		wlctl -i wl$idx msglevel +radar +dfs 2>/dev/null
+		dhdctl -i wl$idx dconpoll 200 2>/dev/null
+	fi
 	local rdrthrs="$(db get hw.$pcid.radarthrs)"
 	if [ -n "$rdrthrs" ]; then
 		wlctl -i wl$idx radarthrs $rdrthrs

layer2interface/broadcom/lib/network/vlan.sh

@@ -58,6 +58,19 @@ ifbaseexists()
 	return 0
 }
 
+check_mac_address()
+{
+	local baseifname="$1"
+	local vlan="$2"
+	local basemac
+	local mac=$(ifconfig -a | grep "^${baseifname}.${vlan} " | awk '{print $NF}')
+	local mac_in_use=$(ifconfig -a | grep "$mac" | grep -v "^${baseifname}.${vlan}[ ]")
+	if [ "$mac_in_use" ]; then
+		basemac=$(ifconfig -a | grep "^$baseifname " | awk '{print $NF}')
+		ifconfig ${baseifname}.${vlan} hw ether $basemac
+	fi
+}
+
 addbrcmvlan()
 {
 	local baseifname=$1
@@ -102,9 +115,11 @@ addbrcmvlan()
 					vlanctl --if-create $baseifname $vlan8021q
 				else
 					vlanctl --dhcp-bridged --if-create $baseifname $vlan8021q
+					check_mac_address $baseifname $vlan8021q
 				fi
 			else
 				vlanctl --routed --if-create $baseifname $vlan8021q
+				check_mac_address $baseifname $vlan8021q
 			fi
 
 			if [ "$bridge" -eq 1 ]; then

mtd-utils/Makefile

@@ -1,123 +0,0 @@
-# 
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mtd-utils
-PKG_VERSION:=1.5.1
-PKG_RELEASE:=3
-PKG_INSTALL:=1
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=dd9f464eced6af7d5e6a4a920b727421229310f4
-PKG_SOURCE_URL:=http://public.inteno.se:/mtd-utils
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-FILES:= \
-	docfdisk \
-	doc_loadbios \
-	flashcp \
-	flash_erase \
-	flash_lock \
-	flash_otp_dump \
-	flash_otp_info \
-	flash_otp_lock \
-	flash_otp_write \
-	flash_unlock \
-	ftl_check \
-	ftl_format \
-	imagewrite \
-	jffs2dump \
-	jffs2reader \
-	mkfs.jffs2 \
-	mtd_debug \
-	nanddump \
-	nandtest \
-	nandwrite \
-	nftldump \
-	nftl_format \
-	recv_image \
-	rfddump \
-	rfdformat \
-	serve_image \
-	sumtool
-
-ifneq ($(CONFIG_LINUX_2_4),y)
-FILES += \
-	mkfs.ubifs \
-	mtdinfo \
-	ubiattach \
-	ubiblock \
-	ubicrc32 \
-	ubidetach \
-	ubiformat \
-	ubimkvol \
-	ubinfo \
-	ubinize \
-	deubinize \
-	ubirename \
-	ubirmvol \
-	ubirsvol \
-	ubiupdatevol
-endif
-
-define PartGen
-define Package/mtd-utils-$(subst _,-,$(1))
-  TITLE:=MTD $(1)
-  URL:=http://www.linux-mtd.infradead.org/
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=mtd-utils +zlib +liblzo +libuuid
-endef
-endef
-
-define Package/mtd-utils
-  TITLE:=Utilities for flash info/debug
-  SECTION:=utils
-  CATEGORY:=Utilities
-  MENU:=1
-endef
-
-define Package/mtd-utils/description
-  Utilities for manipulating memory technology devices.
-endef
-
-define Package/mtd-utils/install
-	true
-endef
-
-$(foreach file,$(FILES),$(eval $(call PartGen,$(file))))
-
-MAKE_FLAGS += \
-	DESTDIR="$(PKG_INSTALL_DIR)" \
-	BUILDDIR="$(PKG_BUILD_DIR)" \
-	LDLIBS+="$(LIBGCC_S)" \
-	WITHOUT_XATTR=1
-
-ifeq ($(CONFIG_LINUX_2_4),y)
-MAKE_FLAGS += \
-	SUBDIRS=""
-endif
-
-define PartInstall
-define Package/mtd-utils-$(subst _,-,$(1))/install
-	$(INSTALL_DIR) \
-		$$(1)/usr/sbin
-
-	$(INSTALL_BIN) \
-		$(PKG_INSTALL_DIR)/usr/sbin/$(1) \
-		$$(1)/usr/sbin/
-endef
-endef
-
-$(foreach file,$(FILES),$(eval $(call PartInstall,$(file))))
-
-$(eval $(call BuildPackage,mtd-utils))
-$(foreach file,$(FILES),$(eval $(call BuildPackage,mtd-utils-$(subst _,-,$(file)))))

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=db710fed768e20fba40212e11fa4191593e168fc
+PKG_SOURCE_VERSION:=2217e777ce56b53878ca467a06025db935c235eb
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/peripheral_manager
 

peripheral_manager/files/etc/init.d/peripheral_led_normal

@@ -0,0 +1,15 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+
+USE_PROCD=0
+NAME=peripheral_led_normal
+
+start_service() {
+	ubus -t 2 wait_for led.status
+	ubus call led.status set '{"state":"ok"}'
+	ubus -t 2 wait_for button
+}
+
+

peripheral_manager/files/etc/init.d/peripheral_manager

@@ -16,11 +16,12 @@ start_service() {
 
 service_running() {
 	ubus -t 2 wait_for led.status
-	ubus call led.status set '{"state":"ok"}'
+	ubus call led.status set '{"state":"notice"}'
 	ubus -t 2 wait_for button
 }
 
-stop() {
-	service_stop /sbin/peripheral_manager
+stop_service() {
+    ubus call leds set '{"state":"alloff"}'
+    service_stop /sbin/peripheral_manager
 }
 

port-management/files/etc/init.d/port_management

@@ -130,7 +130,10 @@ set_port_pause() {
 }
 
 start_service() {
-	check_for_config
+	[ -f /sbin/db ] && check_for_config
+
+	[ -f /usr/sbin/ethswctl -a -f /usr/sbin/ethctl ] || return
+
 	config_load ports
 	config_foreach configure_ethports ethport
 }

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=3.1.28
+PKG_VERSION:=3.1.38
 
-PKG_SOURCE_VERSION:=44105d2003ad530b8ba4e85fd6ac06850aec1f4c
+PKG_SOURCE_VERSION:=8a89a36d534492f198305fb97da68adefccf5f5d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/questd
 
@@ -19,24 +19,31 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-QUESTD_CFLAGS:=-DIOPSYS_BROADCOM
+QUESTD_TARGET:=-DIOPSYS_BROADCOM
 KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-QUESTD_CFLAGS:=-DIOPSYS_BROADCOM
+QUESTD_TARGET:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-QUESTD_CFLAGS:=-DIOPSYS_MARVELL
+QUESTD_TARGET:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
-QUESTD_CFLAGS:=-DIOPSYS_LANTIQ
+QUESTD_TARGET:=-DIOPSYS_LANTIQ
+else ifeq ($(CONFIG_TARGET_iopsys_ramips_ex400),y)
+QUESTD_TARGET:=-DIOPSYS_MEDIATEK
+QUESTD_CFLAGS:=\
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl-tiny
 else
 $(info (UNEXPECTED CONFIG TARGET))
 endif
+QUESTD_CFLAGS:=$(QUESTD_CFLAGS) $(QUESTD_TARGET)
 
+export QUESTD_TARGET
 export KERNEL_DIR
 export QUESTD_CFLAGS
 
 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +ubus +libpthread
+	DEPENDS:=+libuci +libubox +ubus +libpthread +(TARGET_iopsys_ramips_ex400):swconfig +(TARGET_iopsys_ramips_ex400):libnl-tiny
 	TITLE:=router info daemon
 endef
 
@@ -50,11 +57,9 @@ define Package/questd/install
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/graphd $(1)/sbin/
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/router.sh $(1)/usr/libexec/rpcd/router
-	#$(INSTALL_BIN) $(PKG_BUILD_DIR)/wps.sh $(1)/usr/libexec/rpcd/wps
 endef
 
 $(eval $(call BuildPackage,questd))

questd/files/etc/init.d/quest

@@ -11,10 +11,18 @@ start_service() {
 	procd_set_param command "/sbin/questd"
 	procd_set_param respawn
 	procd_close_instance
+
+	procd_open_instance
+	procd_set_param command "/sbin/graphd"
+	procd_set_param respawn
+	procd_close_instance
+
+	pidof imonitor > /dev/null 2>&1 || /sbin/imonitor &
 }
 
 stop() {
 	service_stop /sbin/questd
+	service_stop /sbin/graphd
 }
 
 service_triggers()

questd/files/sbin/imonitor

@@ -0,0 +1,193 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+# 1. sleep for $SLEEP_LONG seconds
+# 2. run the check_* functions
+# 3. sleep for $SLEEP_SHORT seconds
+# 4. go to step 2. $SAMPLES-1 times (step 2. will run $SAMPLES times)
+# 5. go to step 1.
+SAMPLES=4
+SLEEP_SHORT=2
+SLEEP_LONG=10
+
+# worst-case scenario:
+# quest will be restarted in:
+# SLEEP_LONG + (SAMPLES-1)*SLEEP_SHORT + UBUS_TIMEOUT + epsilon =
+# = 21 seconds
+
+# number of process
+NPROC_LIMIT=2	# the value that is considered to be wrong (and above)
+NPROC_COUNT=4	# number of time that the NPROC_LIMIT has to be hit to trigger a process restart
+NPROC_NFAIL=0	# current consecutive Number of FAILures. process restarts when NPROC_NFAIL == NPROC_COUNT
+
+# memmory limit
+MEM_LIMIT=50000
+MEM_COUNT=4
+MEM_NFAIL=0
+
+# procentage of CPU usage
+PCPU_LIMIT=38
+PCPU_COUNT=4
+PCPU_NFAIL=0
+
+UBUS_TIMEOUT=5
+
+
+BSDBIN=$(which bsd)
+
+
+restart_questd()
+{
+	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL"
+
+	killall -q -KILL questd
+	/etc/init.d/quest stop
+	killall -q -KILL questd
+	/etc/init.d/quest start
+
+	NPROC_NFAIL=0
+	MEM_NFAIL=0
+	PCPU_NFAIL=0
+}
+
+
+check_nproc()
+{
+	local nproc="$@"
+
+	if [ "$nproc" -ge "$NPROC_LIMIT" -o "$nproc" -eq "0" ]; then
+		NPROC_NFAIL=$((NPROC_NFAIL + 1))
+	else
+		NPROC_NFAIL=0
+	fi
+
+	[ "$NPROC_NFAIL" -ge "$NPROC_COUNT" ] && return 1
+
+	return 0
+}
+
+check_mem()
+{
+	local mem="$@"
+	local ok=true
+
+	for m in $mem; do
+		if [ "$m" -ge "$MEM_LIMIT" ]; then
+			ok=false
+			break
+		fi
+	done
+
+	[ "$ok" = "true"  ] && MEM_NFAIL=0
+	[ "$ok" = "false" ] && MEM_NFAIL=$((MEM_NFAIL + 1))
+
+	[ "$MEM_NFAIL" -ge "$MEM_COUNT" ] && return 1
+
+	return 0
+}
+
+check_pcpu()
+{
+	local pcpu="$@"
+	local ok=true
+
+	for p in $pcpu; do
+		p=${p%%%*}
+		if [ "$p" -ge "$PCPU_LIMIT" ]; then
+			ok=false
+			break
+		fi
+	done
+
+	[ "$ok" = "true"  ] && PCPU_NFAIL=0
+	[ "$ok" = "false" ] && PCPU_NFAIL=$((PCPU_NFAIL + 1))
+
+	[ "$PCPU_NFAIL" -ge "$PCPU_COUNT" ] && return 1
+
+	return 0
+}
+
+check_ubuscall()
+{
+	local rv
+
+	ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
+	rv=$?
+
+	[ "$rv" = "0" ] && return 0
+	return 1
+}
+
+
+restart_bsd()
+{
+	logger -s -t $0[$$] "Restarting bsd."
+	killall -q -KILL bsd
+	bsd
+}
+
+check_bsdcall()
+{
+	local rv
+
+	bsd -s >/dev/null 2>&1
+	rv=$?
+
+	[ "$rv" == "0" ] && return 0
+	return 1
+}
+
+
+main()
+{
+	local topline nproc mem pcpu
+	local restart_nproc restart_mem restart_pcpu
+	local sample=1
+	local bsdenabled
+
+	while true ; do
+
+		# collect info
+		topline=$(top -bn1 | grep "/sbin/[q]uestd" | grep -v monitor)
+
+		nproc=$(echo -n "$topline" | awk 'END{print NR}')
+		check_nproc $nproc
+		restart_nproc=$?
+
+		mem=$(echo -en "$topline" | awk '{print $5}')
+		check_mem $mem
+		restart_mem=$?
+
+		pcpu=$(echo -en "$topline" | awk '{print $7}')
+		check_pcpu $pcpu
+		restart_pcpu=$?
+
+		# do the restart
+		if [ 	"$restart_nproc" = "1" -o \
+			"$restart_mem"   = "1" -o \
+			"$restart_pcpu"  = "1" ]
+		then
+			check_ubuscall || restart_questd
+		fi
+
+		if [ "$BSDBIN" ] ; then
+			config_load wireless
+			config_get_bool bsdenabled bandsteering enabled 0
+			if [ $bsdenabled == "1" -a "$(pidof wifi)" == "" ] ; then
+				check_bsdcall || restart_bsd
+			fi
+		fi
+
+		# sleep
+		if [ "$sample" -lt "$SAMPLES" ]; then
+			sample=$((sample + 1))
+			sleep $SLEEP_SHORT
+		else
+			sample=1
+			sleep $SLEEP_LONG
+		fi
+	done
+}
+
+main $@

samba3/files/samba.config

@@ -3,5 +3,4 @@ config samba
         option 'workgroup'	'IntenoSMB'
         option 'description'	'IntenoSMB'
         option 'homes'		'0'
-	option 'interface'	'lan'
 

tptest/Makefile

@@ -4,7 +4,7 @@ PKG_NAME:=tptest
 PKG_VERSION:=1.3
 PKG_RELEASE:=0
 
-PKG_SOURCE_VERSION:=4dfab45a92328226c8182347df50e86a5d72ca5f
+PKG_SOURCE_VERSION:=57786908e7a0c790f303417b459c562887582384
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/tptest
 

tptest/files/etc/config/speedtest

@@ -3,14 +3,6 @@ config testserver '1'
 	option port '1640'
 
 config testserver '2'
-	option server 'tptest.dataphone.se'
-	option port '1640'
-
-config testserver '3'
 	option server 'referens.sth.ip-performance.se'
 	option port '1642'
 
-config testserver '4'
-	option server 'tptest.songnetworks.se'
-	option port '1640'
-

uboot/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=2016.08
 PKG_RELEASE:=1
 PKG_SOURCE_URL:=git@private.inteno.se:uboot
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e925b36e4e29416aac7f2a64ef40d44ef034d4c4
+PKG_SOURCE_VERSION:=08fb2b839326c3bc2a2a0472b5dae6ee0288e483
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -72,9 +72,13 @@ endef
 
 define Package/uboot/install/default
 	$(INSTALL_DIR) $(BIN_DIR)/$(TARGET)
+	$(INSTALL_DIR) $$(1)/boot
 	$(CP) \
 		$(PKG_BUILD_DIR)/uboot.img \
 		$(BIN_DIR)/$(TARGET)/
+	$(CP) \
+		$(PKG_BUILD_DIR)/uboot.img \
+		$$(1)/boot
 	$(INSTALL_DIR) $$(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/env/fw_printenv $$(1)/usr/sbin/
 	ln -s /usr/sbin/fw_printenv $$(1)/usr/sbin/fw_setenv