Merge branch 'fredrik_uci-diff' of public.inteno.se:feed-inteno-packages into fredrik_uci-diff

asterisk-1.8.x-mod/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1
 
-PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
+PKG_SOURCE_VERSION:=1618b4881a44ea493c602da5c60723c45509719a
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
 

asterisk-1.8.x-mod/files/asterisk.init

@@ -3,8 +3,6 @@
 START=98
 STOP=10
 
-. /usr/share/libubox/jshn.sh
-. /lib/functions/network.sh
 USE_PROCD=1
 NAME=asterisk
 PROG=/usr/sbin/asterisk
@@ -13,21 +11,9 @@ DEFAULT=/etc/default/asterisk
 init_asterisk() {
 	# do not start asterisk until the
 	# router receives a default route
-	config_load voice_client
-	local bindintf
-	config_get bindintf SIP bindintf ""
-	if [ "$bindintf" == ""  ]; then
-		while ! ip r | grep -q default; do
-			sleep 1
-		done
-	else
-		network_get_ipaddr ip "$bindintf"
-		while [ "$ip" == "" ]; do
-			sleep 1
-			network_flush_cache
-			network_get_ipaddr ip "$bindintf"
-		done
-	fi
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
 
 	[ -f $DEFAULT ] && . $DEFAULT
 	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk

catv/files/etc/init.d/catv

@@ -10,16 +10,12 @@ USE_PROCD=1
 
 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0
 
-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"
 
 }

dectmngr/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.0.23
+PKG_VERSION:=1.0.24
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_SOURCE_VERSION:=6ba403663bc9cfdb8f89fb34de367f0796d68552
 PKG_NAME:=dectmngr
 
 

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3191d38385c8e46c3888859f196e41c7db4447bc
+PKG_SOURCE_VERSION:=46658e95b19c35ff6194a9566bb5439720ec251d
 PKG_NAME:=dectmngr2
 
 

eventlog/Makefile

@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))

gigaset-elements/.gitignore

@@ -1,3 +0,0 @@
-
-git-src
-

gigaset-elements/Makefile

@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-

ice-client/Makefile

@@ -5,10 +5,6 @@ PKG_NAME:=ice-client
 
 CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
 CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
-
-#CFMODULES:=$(CFMODULES) webaccess texec iperf
-#CFMODULES:=$(sort $(CFMODULES))
-
 $(info Building package: $(PKG_NAME))
 $(info Building with additional modules: $(CFMODULES))
 export CFMODULES
@@ -19,33 +15,31 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=4.0.1
-PKG_RELEASE:=RC17
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC11
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=97a3da5fae8b5374a598c78346cb11477c85e293
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
 ifeq ($(CONFIG_ICE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
 else
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
-PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
-
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 endif
 
 
 ###########################--RELEASE--################################
 
-#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ice-client/Default
@@ -59,7 +53,6 @@ $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
 	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
-#	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
 endef
 
 define Package/ice-client/config
@@ -88,6 +81,7 @@ endef
 #define Build/Prepare
 #	rm -rf $(PKG_BUILD_DIR)
 #	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
 #endef
 
 ###########################--DEVELOPMENT--################################
@@ -145,7 +139,7 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1,webaccessService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
@@ -161,8 +155,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(CP) ./files/ice-client.uci_default $(1)/etc/uci-defaults/95-ice-client
 endef
 endif
 
@@ -912,7 +904,7 @@ PROC_ID=$$(cat /tmp/ice.pid)
 PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
 if [ -n "$$PROC_EXISTS" ]; then
   read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+  echo "system moduleRemove topic=texec" > /tmp/cfin
 fi
 exit 0
 endef
@@ -943,54 +935,6 @@ fi
 exit 0
 endef
 
-# webaccess
-define Package/ice-client-webaccess
-  $(call Package/ice-client/Default)
-  TITLE:=webaccess
-  DEPENDS+= 
-endef
-
-define Package/ice-client-webaccess/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-webaccess/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/webaccessService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-webaccess/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=webaccessService.so.1.0.1" package="ice-client-webaccess" > /tmp/cfin
-fi
-exit 0
-endef
 # bmspeedtest
 define Package/ice-client-bcmspeedmgr
   $(call Package/ice-client/Default)
@@ -1041,5 +985,4 @@ $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
 $(eval $(call BuildPackage,ice-client-texec))
 $(eval $(call BuildPackage,ice-client-bcmspeedmgr))
-$(eval $(call BuildPackage,ice-client-webaccess))
 endif

ice-client/files/ice-client.uci_default

@@ -1,63 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	local password="$(db get hw.board.wpaKey)"
-	if [ -n "$password" ]; then
-		adduser -D -H -s /bin/false ice
-		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
-	fi
-}
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-broadcom-wl'
-	list write 'juci-broadcom-wl-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-EOF
-}
-
-exit 0
-

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2016-10-20
+PKG_VERSION:=3.0-2016-06-02
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=fdaa1daa184205fe256bb155b7fb0f29a034baaa
+PKG_SOURCE_VERSION:=3796902ebf44c3cd00b3829ef7aca911cdde2cc7
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,7 +34,7 @@ define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +bcmkernel +curl
 endef
 
 define Package/icwmp/description

inteno-netmodes/Makefile

@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=inteno-netmodes
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inteno-netmodes
-  CATEGORY:=Base system
-  TITLE:=Predefined Network Modes
-endef
-
-define Package/inteno-netmodes/description
-	Predefined Network Modes
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/inteno-netmodes/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/config/netmode

@@ -1,5 +0,0 @@
-config mode 'setup'
-        option dir '/etc/netmodes'
-        option detail ''
-        option curmode 'routed'
-

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -1,71 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-include /lib/network
-
-[ "$INTERFACE" != "$(uci get layer2_interface_ethernet.Wan.ifname)" ] && exit
-[ "$(uci get netmode.setup.curmode)" != "repeater" ] && exit
-
-case "$(uci get netmode.setup.curmode)" in
-		repeater|repeater_dualdown) echo "Preparing to switch mode" ;;
-		*) exit ;;
-esac
-
-get_wifi_wet_interface() {
-#	handle_interface() {
-#		config_get mode "$1" mode
-#		if [ "$mode" == "wet" ] ; then
-#			config_get ifname "$1" ifname
-#			echo "$ifname"
-#		fi
-#	}
-#	config_load wireless
-#	config_foreach handle_interface wifi-iface "$device"
-	echo "wl1"
-}
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1 $2
-}
-
-case "$ACTION" in
-	add|register)
-		echo "Autoswitch to Extender mode" > /dev/console
-		sleep 2
-		# remove wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater_dualdown)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=1
-			;;
-			repeater)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=ap
-			;;
-		esac
-		uci commit wireless
-		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $(uci get layer2_interface_ethernet.Wan.ifname) $(uci get network.wan.ifname) | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		ubus call uci commit '{"config":"network"}'
-	;;
-	remove|unregister)
-		echo "Autoswitch to Repeater mode" > /dev/console
-		sleep 2
-		# add wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater_dualdown)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=0
-			;;
-			repeater)
-				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=wet
-			;;
-		esac
-		uci commit wireless
-		#remove wan ethernet port
-		uci set network.wan.ifname="$(uci get network.wan.ifname | sed 's/$/ /' | sed -r "s/`uci get layer2_interface_ethernet.Wan.ifname` //g")"
-		ubus call uci commit '{"config":"network"}'
-	;;
-esac

inteno-netmodes/files/etc/init.d/netmode

@@ -1,169 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=10
-USE_PROCD=1
-
-. /usr/share/libubox/jshn.sh
-. /lib/network/config.sh
-
-local modedir=$(uci -q get netmode.setup.dir)
-[ -n "$modedir" ] || modedir="/etc/netmodes"
-
-get_device() {
-	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
-	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
-        local cnt=1
-        local idx=0
-
-	local pnum=$(echo $PORT_NAMES | wc -w)
-
-	if [ $pnum -le 2 ]; then
-		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
-	fi
-
-	# get index of interface name
-	for i in $PORT_NAMES; do
-		if [ "$i" == "$1" ]; then
-			idx=$cnt
-		fi
-		cnt=$((cnt+1))
-	done
-
-        # get port name from index
-	cnt=1
-	for i in $PORT_ORDER; do
-		if [ "$cnt" == "$idx" ]; then
-			echo $i
-		fi
-		cnt=$((cnt+1))
-	done
-}
-
-populate_netmodes() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	delete_netmode() {
-		uci delete netmode.$1
-	}
-
-	config_load netmode
-
-	config_foreach delete_netmode netmode
-	uci commit netmode
-
-	wan=$(get_device WAN)
-	lan1=$(get_device LAN1)
-	lan2=$(get_device LAN2)
-	lan3=$(get_device LAN3)
-	lan4=$(get_device LAN4)
-	lan5=$(get_device LAN5)
-
-	for file in $(find $modedir -type f); do
-		grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-		grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-		grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-		grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-	done
-
-	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
-	for mode in $(ls $modedir); do
-			lang=""
-			desc=""
-			exp=""
-			uci -q set netmode.$mode=netmode
-			uci -q set netmode.$mode.conf=$mode
-			json_load "$(cat $modedir/$mode/DETAILS)"
-
-			if json_select excluded_boards; then
-				exclude=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							uci -q delete netmode.$mode
-							exclude=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $exclude -eq 1 ] && continue
-			fi
-
-			if json_select acl; then
-				_i=1
-				while json_get_var user $_i; do
-					uci add_list netmode.$mode._access_r="$user"
-					_i=$((_i+1))
-				done
-				json_select ..
-			fi
-
-			json_select description
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var desc $lang
-				uci -q set netmode.$mode."desc_$lang"="$desc"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
-				json_select ..
-			done
-			json_select ..
-
-			json_select explanation
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var exp $lang
-				uci -q set netmode.$mode."exp_$lang"="$exp"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
-				json_select ..
-			done
-			json_select ..
-
-			json_get_var cred credentials
-			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var reboot reboot
-			uci -q set netmode.$mode.reboot="$reboot"
-	done
-	uci commit netmode
-}
-
-switch_netmode() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	config_load netmode
-
-	config_get curmode setup curmode
-	config_get conf $curmode conf
-	cp /etc/netmodes/$conf/* /etc/config/
-	rm -f /etc/config/DETAILS
-	sync
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-	if [ "$reboot" == "0" ]; then
-		/etc/init.d/enviroment reload
-	else
-		reboot &
-	fi
-}
-
-start_service() {
-	populate_netmodes
-}
-
-reload_service() {
-        switch_netmode
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger netmode
-}
-

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "Bridged IPTV" },
-		{ "sv" : "Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-

inteno-netmodes/files/etc/netmodes/bridged/dhcp

@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-

inteno-netmodes/files/etc/netmodes/bridged/firewall

@@ -1,114 +0,0 @@
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -1,23 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm1.1'
-        option baseifname 'atm1'
-        option atmtype 'ubr'
-        option name 'atm_tv'
-        option vpi '8'
-        option vci '45'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -1,18 +0,0 @@
-
-
-config 'vlan_interface'
-	option name 'eth_tv'
-	option ifname '$WAN.100'
-	option baseifname '$WAN'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'vdsl_tv'
-	option ifname 'ptm0.100'
-	option baseifname 'ptm0'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/bridged/mcpd

@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -1,37 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-

inteno-netmodes/files/etc/netmodes/bridged/wireless

@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "VoIP + Bridged IPTV" },
-		{ "sv" : "VoIP + Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp

@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -1,114 +0,0 @@
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -1,34 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm1.1'
-        option baseifname 'atm1'
-        option atmtype 'ubr'
-        option name 'atm_tv'
-        option vpi '8'
-        option vci '45'
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '1'
-        option ifname 'atm2.1'
-        option baseifname 'atm2'
-        option atmtype 'ubr'
-        option name 'atm_voip'
-        option vpi '8'
-        option vci '55'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -1,32 +0,0 @@
-
-
-config 'vlan_interface'
-	option name 'eth_tv'
-	option ifname '$WAN.100'
-	option baseifname '$WAN'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'eth_voip'
-	option ifname '$WAN.200'
-	option baseifname '$WAN'
-	option vlan8021q '200'
-	option vlan8021p '0'
-
-config 'vlan_interface'
-	option name 'vdsl_tv'
-	option ifname 'ptm0.100'
-	option baseifname 'ptm0'
-	option vlan8021q '100'
-	option vlan8021p '0'
-	option bridge '1'
-
-config 'vlan_interface'
-	option name 'vdsl_voip'
-	option ifname 'ptm0.200'
-	option baseifname 'ptm0'
-	option vlan8021q '200'
-	option vlan8021p '0'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd

@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network

@@ -1,45 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'voip'
-	option type 'anywan'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.200 atm2.1 $WAN.200'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless

@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
-	],
-	"excluded_boards" : [
-		"DG*",
-		"EG*",
-		"VG*"
-	],
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -1,121 +0,0 @@
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-config rule
-	option name		Repeater-Management
-	option src		wan
-	option proto		tcp
-	option dest_port	'22 80 8080 8181 9876'
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/repeater/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -1,24 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option vendorid 'Inteno_Repeater_$MAC4'
-	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1'
-	option reqopts '43'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
-	option ipaddr '192.168.11.1'
-	option netmask '255.255.255.0'
-

inteno-netmodes/files/etc/netmodes/repeater/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '20'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"DG*",
-		"EG*",
-		"VG*"
-	],
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_dualdown/firewall

@@ -1,121 +0,0 @@
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-config rule
-	option name		Repeater-Management
-	option src		wan
-	option proto		tcp
-	option dest_port	'22 80 8080 8181 9876'
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/network

@@ -1,24 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option vendorid 'Inteno_Repeater_$MAC4'
-	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1'
-	option reqopts '43'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
-	option ipaddr '192.168.11.1'
-	option netmask '255.255.255.0'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/wireless

@@ -1,101 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '20'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-

inteno-netmodes/files/etc/netmodes/routed/DETAILS

@@ -1,12 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"credentials" : 0
-}
-

inteno-netmodes/files/etc/netmodes/routed/dhcp

@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-

inteno-netmodes/files/etc/netmodes/routed/firewall

@@ -1,153 +0,0 @@
-config settings settings
-        option disabled 0
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto	icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for prioritizing some specific packets
-config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_adsl

@@ -1,13 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_ethernet

@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_vdsl

@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-

inteno-netmodes/files/etc/netmodes/routed/mcpd

@@ -1,14 +0,0 @@
-config mcpd 'mcpd'
-	option igmp_proxy_interfaces 'wan'
-	option igmp_default_version '2'
-	option igmp_query_interval '125'
-	option igmp_query_response_interval '100'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_proxy_enable '1'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-lan'

inteno-netmodes/files/etc/netmodes/routed/network

@@ -1,29 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-

inteno-netmodes/files/etc/netmodes/routed/wireless

@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-

iop/configs/config

@@ -9,9 +9,9 @@ CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
 CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_bind-host=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
-CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
@@ -32,7 +32,6 @@ CONFIG_PACKAGE_ice-client-netrounds=m
 CONFIG_PACKAGE_ice-client-rshell=m
 CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_inteno-netmodes=y
 CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
@@ -70,7 +69,6 @@ CONFIG_PACKAGE_juci-mod-system=y
 CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-owsd=y
 CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-samba=y
 CONFIG_PACKAGE_juci-simple-gui=y
@@ -90,7 +88,6 @@ CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
 CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
-CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
 CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_minidlna=y
@@ -102,6 +99,7 @@ CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
 CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_multiwan=y
 CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netcheck=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
@@ -117,10 +115,10 @@ CONFIG_PACKAGE_ppp-mod-pppol2tp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
 CONFIG_PACKAGE_qos-scripts=y
+CONFIG_PACKAGE_qrencode=y
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rdisc6=y
 CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_samba3=y
@@ -147,7 +145,6 @@ CONFIG_USE_STRIP=y
 CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
 # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y

iop/scripts/compile.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-function compile {
-	if [ -z "$1" ]; then
-		echo "Please give a valid package as first argument."
-		return 1
-	fi
-
-	local cpath pck
-	local lpath=$(find package/ -type l -name $1)
-	local dpath=$(find package/ -type d -name $1)
-
-	for pck in $lpath $dpath; do
-		if [ -n "$(ls $pck/Makefile 2>/dev/null)" ]; then
-			cpath=$pck
-			break
-		fi
-	done
-
-	if [ -n "$cpath" ]; then
-		make $cpath/compile V=$2
-	else
-		echo "Package $1 does not exist. Make sure you have installed the necessary feed."
-	fi
-}
-
-register_command "compile" "Compile a specific package: ./iop compile <PACKAGE_NAME> [0-99]; i.e ./iop compile netifd 99"

iop/scripts/feeds_update.sh

@@ -3,21 +3,25 @@
 function feeds_update {
 
     developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
-
 
     git remote -v | grep -q http || developer=1
 
+    #while getopts "d" opt; do
+    #    case $opt in
+    #        d)
+    #	    developer=1
+    #            ;;
+    #        \?)
+    #            echo "Invalid option: -$OPTARG" >&2
+    #            exit 1
+    #            ;;
+    #    esac
+    #done
+
     cp .config .genconfig_config_bak
 
+    rm -rf package/feeds
+
     #if -d argument is passed, clone feeds with ssh instead of http
     if [ $developer == 1 ]; then
 	./scripts/feeds update -g
@@ -25,21 +29,25 @@ function feeds_update {
 	./scripts/feeds update
     fi
 
-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-	./scripts/feeds install -f -p feed_inteno_openwrt -a
-    fi
 
-    # targets need to be installed explicitly
-    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p feed_inteno_targets iopsys-ramips
-    
-    # install all packages
+    ./scripts/feeds install -f -p feed_inteno_openwrt -a
+    ./scripts/feeds install -f -p feed_inteno_juci -a
+    ./scripts/feeds install -f -p feed_inteno_packages -a
+    ./scripts/feeds install -f -p feed_inteno_broadcom -a
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-arm
     ./scripts/feeds install -a 
+    ./scripts/feeds uninstall asterisk18
+    ./scripts/feeds uninstall zstream
+    ./scripts/feeds uninstall mtd-utils
+    ./scripts/feeds install -f -p feed_inteno_packages mtd-utils
+    ./scripts/feeds uninstall qrencode
+    ./scripts/feeds install -f -p feed_inteno_packages qrencode
+    ./scripts/feeds uninstall libwebsockets
+    ./scripts/feeds uninstall libwebsockets-openssl
+    ./scripts/feeds install -f -p feed_inteno_juci libwebsockets
 
-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
+    rm -rf package/feeds/oldpackages/libzstream # have to run this for now since uninstall is not working every time
 
     cp .genconfig_config_bak .config
     make defconfig

iop/scripts/genconfig.sh

@@ -1,336 +1,259 @@
 #!/bin/bash
 
 function genconfig {
-	export CLEAN=0
-	export IMPORT=1
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
-	CUSTPATH="customerconfigs"
-	CUSTREPO="git@private.inteno.se:customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
-	iopsys_brcm63xx_arm="dg400 eg400"
-	iopsys_ramips="ex400"
-	ramips="mt7621"
-	target="bogus"
-	masterconfig=1
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400"
+    target="bogus"
+
+    set_target() {
 
-	set_target()
-	{
 	local profile=$1
 
 	for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_mips"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+            fi
 	done
 
 	for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_arm"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+            fi
 	done
+    }
 
-	for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-			target="iopsys_ramips"
-			return
-		fi
+
+    git remote -v | grep -q http || {
+	DEVELOPER=1
+
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
 	done
+    }
 
-	for p in $ramips; do
-		if [ $p == $profile ]; then
-			target="ramips"
-			masterconfig=0
-			return
-		fi
-	done
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }
 
-	}
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }
 
-	git remote -v | grep -q http || {
-		DEVELOPER=1
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }
 
-		bcmAllowed=0
-		iceAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			esac
-		done
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
-		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -p|--profile\tSet profile (if exists) default juci"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo
-		echo "Example ./iop genconfig vg50 TELIA"
-		echo "(if no customerconfig is chosen the Inteno Config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$1" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	use_local_mirror()
-	{
-		if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null; then
-			echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
-			sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
-		else
-			echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
-		fi
-	}
-
-	generate_config()
-	{
+    generate_config()
+    {
 	DIFFFILE="$1"
 	MASTERFILE="$2"
 	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
 	done < $DIFFFILE
-	}
+    }
 
-	setup_dirs()
-	{
-		if [ $DEVELOPER -eq 1 ]; then
-			if [ ! -d "$CUSTPATH" ]; then
-			git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-			cd $CUSTPATH
-			v "git pull"
-			git pull
-			cd - >/dev/null #go back
-			fi
-		fi
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		local CUSTOMER=$2
-
-		# Validate seleced board and customer
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-			echo "Customer profile does not exist"
-			exit 1
-		fi
-
-		# Generate base config
-		# Used only for iopsys targets, not openwrt targets
-		rm -f .config
-		if [ $masterconfig -eq 1 ]; then
-			v "Config $BOARDTYPE selected"
-			v "cp $CONFIGPATH/config .config"
-			cp $CONFIGPATH/config .config
-		fi
-
-		# Apply profile diff to master config if selected
-		if [ -n "$PROFILE" ]; then
-			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
-				cat $CONFIGPATH/$PROFILE.diff >> .config
-			elif [ "$PROFILE" == "juci" ]; then
-				v "Default profile (juci) is selected."
-			else
-				echo "ERROR: profile $PROFILE does not exist!"
-				exit 1
-			fi
-		else
-			v "No profile selected! Using default."
-		fi
-
-		# Set target and profile
-		echo "CONFIG_TARGET_${target}=y" >> .config
-		echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-
-		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMER" ]; then
-			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-			fi
-			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-			fi
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-
-		# Enable Pckage source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		if [ $DEVELOPER -eq 1 ]; then
-			# rewrite url to clone with ssh instead of http
-			echo "CONFIG_DEVEL=y" >>.config
-			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-		else
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ICE_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-		fi
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		# Temporary fixup for juci/luci profile
-		if [ "$PROFILE" == "luci" ]; then
-			sed -i '/CONFIG_DEFAULT_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
-		fi
-
-		if [ $masterconfig -eq 1 ]; then
-			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-		fi
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
 	fi
 
-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+	# Base config on master
+	v  "Config $BOARDTYPE selected"
+	v "cp  $CONFIGPATH/config  .config"
+	cp  $CONFIGPATH/config  .config
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-		setup_dirs
-		create_and_copy_files "$1" "$2"
-
-		if [ $masterconfig -eq 1 ]; then
-			use_local_mirror
-		fi
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
 	fi
+
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+	use_local_mirror
+    fi
 }
 
+
 register_command "genconfig" "Generate configuration for board and customer"

iop/scripts/generate_tarballs.sh

@@ -1,16 +1,17 @@
 #!/bin/sh
 
 
+
 build_bcmkernel_consumer() {
 	local tarfile bcmkernelcommith
 	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
-	ssh $SERVER "ls $FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
 	sh do_consumer_release -p $profile -y
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp $tarfile $SERVER:$FPATH/bcmopen-$profile-$bcmkernelcommith.tar.gz
+	scp $tarfile inteno@ihgsp.inteno.se:/home/inteno/public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
 	cd $curdir
 }
@@ -21,12 +22,12 @@ build_natalie_consumer() {
 	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
 	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
 	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
-	ssh $SERVER "ls $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/natalie-dect-$natalieversion/
 	mkdir natalie-dect-open-$natalieversion
 	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
 	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
 	rm -rf natalie-dect-open-$natalieversion
 	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
@@ -39,12 +40,12 @@ build_endptcfg_consumer() {
 	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
 	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
 	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
-	ssh $SERVER "ls $FPATH/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/endptcfg-$endptversion/
 	mkdir endptcfg-open-$endptversion
 	cp endptcfg endptcfg-open-$endptversion/
 	tar -czv  endptcfg-open-$endptversion/ -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
-	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
+	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $curdir/
 	rm -rf endptcfg-open-$endptversion
 	rm -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
@@ -58,19 +59,17 @@ build_ice_consumer() {
 	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	iceversion=$icebasever$icerelease
-	ssh $SERVER "ls $FPATH/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
 	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
 	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
-	scp ice-client-$profile-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
 	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
 	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
 	cd $curdir
 }
 
-function generate_tarballs {
 
-    SERVER="god@software.inteno.se"
-    FPATH="/var/www/html/iopsys/consumer"
+function generate_tarballs {
 
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
@@ -85,5 +84,5 @@ function generate_tarballs {
 
 }
 
-register_command "generate_tarballs" "Generate tarballs for Open SDK"
+register_command "generate_tarballs" "Generate tarballs for openstk"
 

iop/scripts/ssh_sysupgrade.sh

@@ -34,7 +34,7 @@ function ssh_sysupgrade_latest {
 		exit 1
 	fi
 	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.y2 | tail -n1`
+		IMAGE=`ls -Art bin/*/*.y | tail -n1`
 		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
 	}
 }

iup/files/etc/init.d/iup

@@ -103,6 +103,10 @@ init_iup() {
 	fi
 }
 
+boot() {
+	init_iup
+}
+
 start_service() {
 	init_iup
 

iup/files/sbin/iup

@@ -16,7 +16,7 @@ export IUPTEMP="/tmp/iup"
 export INTERACTIVE=0
 export VERBOSE=0
 export CONF=1
-export DESKEY=$(cat /proc/nvram/DesKey | tr -d '\n' | hexdump -e '16/1 "%02x"')
+export DESKEY=$(cat /proc/nvram/DesKey | hexdump -e '16/1 "%02x"')
 export MAC=$(cat /proc/nvram/BaseMacAddr)
 export RANGE=10
 export RETRYSTOP=5
@@ -160,7 +160,7 @@ handle_Downloaded_file()
 {
 	local DECKEY
 	local KEY
-	[ -n "$1" ] && DECKEY=$(echo $1 | tr -d '\n' | hexdump -e '16/1 "%02x"')
+	[ -n "$1" ] && DECKEY=$(echo $1 | hexdump -e '16/1 "%02x"')
 	KEY=${DECKEY:-$DESKEY}
 	local img_type
 	case "$(get_image_type "$IUPCONFFILES")" in                                  
@@ -201,9 +201,6 @@ handle_Downloaded_file()
 						reload $CONFILESLURP
 					fi
 					rm -rf $IUPTEMP
-
-					cp /rom/etc/uci-defaults/* /etc/uci-defaults/
-					sync
 				fi
 			;;
 			*)
@@ -315,6 +312,11 @@ handle_option224()
 		c=$(echo $1|cut -d',' -f4)
 	fi
 
+	echo "url" $url
+	echo "a" $a
+	echo "b" $b
+	echo "c" $c
+
 	currdate=$(date +"%Y-%m-%d")
 
 	active=0
@@ -348,9 +350,8 @@ handle_option224()
 
 	if [ $url ] && [ $active -eq 1 ]; then
 		echo "Software version to download $softwareminuspath"
-		local sysinfo=$(ubus call router.system info)
+		local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
 		json_load "$sysinfo"
-		json_select system
 		json_get_var firmware firmware
 		local firmware_new=${softwareminuspath%.*}	# remove extension (.w, .y or .y2) from filename
 		if [ "$firmware_new" != "$firmware" ] ; then
@@ -422,9 +423,9 @@ if [ -n "$1" ]; then
 	elif [ -n "$vlanid" ]; then
 		logger -t dhcp_opt132 "vlanid: ${vlanid}"
 		change_to_vlan ${vlanid} 0 ${interface}
+	else
+		logger -t dhcp_opt132 "no vlanid given"
 	fi
-
-	exit 0
 fi
 
 local iupurl
@@ -454,9 +455,8 @@ sofwareminuspath=${software##*/}
 v "Software version to download $sofwareminuspath"
 
 if [ $software ]; then
-	local sysinfo=$(ubus call router.system info)
+	local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
 	json_load "$sysinfo"
-	json_select system
 	json_get_var firmware firmware
 	json_get_var filesystem filesystem                                  
         if [ "$filesystem" == "JFFS2" ] ; then                               

layer2interface/broadcom/etc/init.d/layer2_interface

@@ -4,20 +4,20 @@
 . /usr/share/libubox/jshn.sh
 include /lib/network
 
-START=22
+START=21
 USE_PROCD=1
 
 start_service() {
 	local AnnexM
 	local GDmt
-	local Glite
-	local T1413
+	local Glite 
+	local T1413 
 	local ADSL2
 	local AnnexL
 	local ADSL2plus
-	local VDSL2
-	local a8a
-	local b8b
+	local VDSL2 
+	local a8a 
+	local b8b 
 	local c8c
 	local d8d
 	local a12a
@@ -75,21 +75,20 @@ start_service() {
 	sra=$(echo $sra | sed 's/0/off/g')
 
 	echo "Starting DSL"
-
+	
 	xtmctl start
 	xtmctl operate intf --state 1 enable
-	json_load "$(ubus call router.system info)"
-	json_select specs
+	json_load "$(ubus call router quest "{ \"info\": \"specs\" }")"
 	json_get_var vdsl vdsl
 
 	if [ $vdsl -eq 1 ]; then
-		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a\" --sra $sra --bitswap $bitswap --us0 $US0"
+		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile \"$a8a $b8b $c8c $d8d $a12a $b12b $a17a\" --sra $sra --bitswap $bitswap --us0 $US0" 
 		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM$VDSL2 --profile "$a8a $b8b $c8c $d8d $a12a $b12b $a17a" --sra $sra --bitswap $bitswap --us0 $US0
 	else
 		echo "xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap"
 		xdslctl start --up --mod $GDmt$Glite$T1413$ADSL2$AnnexL$ADSL2plus$AnnexM --sra $sra --bitswap $bitswap
 	fi
-
+	
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_adsl

@@ -3,14 +3,14 @@
 . /lib/functions.sh
 include /lib/network
 
-START=22
+START=21
 USE_PROCD=1
 
 checkpvc() {
 	local retur
 	local vpi=$1
 	local vci=$2
-
+	
 	retur=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3 ==test ) print $5 }')
 
 	case $retur in
@@ -25,31 +25,31 @@ checkxtmlist() {
 	local scr
 	local mbs
 	local retur
-
+	
 	case $# in
 		1)
 			pcr=0
 			scr=0
 			mbs=0
-		;;
-		2)
+		;; 
+		2) 
 			pcr=$2
 			scr=0
-			mbs=0
+			mbs=0 
 		;;
-		4)
+		4) 
 			pcr=$2
 			scr=$3
-			mbs=$4
+			mbs=$4 
 		;;
 	esac
-
+	
 	retur=$(xtmctl operate tdte --show | awk -v test="$dtype" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2 ==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
 
 	case $retur in
 		''|*[!0-9]*) return 0 ;;
 		*) return $retur ;;
-	esac
+	esac	
 }
 
 atm_inf_conf() {
@@ -71,15 +71,13 @@ atm_inf_conf() {
 	config_get mbs $1 mbs
 	config_get vpi $1 vpi
 	config_get vci $1 vci
-	config_get ifname $1 ifname
+	config_get ifname $1 ifname 
 	config_get baseifname $1 baseifname
 	config_get name $1 name
 	config_get bridge $1 bridge
 	checkpvc $vpi $vci
 	ret=$?
 
-	ifname="${ifname:-$baseifname.1}"
-
 	if [ "$ret" -eq 0 ]; then
 		checkxtmlist $atmtype $pcr $scr $mbs
 		ret=$?
@@ -92,7 +90,7 @@ atm_inf_conf() {
 				rtvbr)xtmctl operate tdte --add "$atmtype" $pcr $scr $mbs;;
 			esac
 		fi
-
+		 
 		case $link_type in
 			EoA)config_get encaps $1 encapseoa;;
 			PPPoA)config_get encaps $1 encapspppoa;;
@@ -103,11 +101,10 @@ atm_inf_conf() {
 		ret="$?"
 		xtmctl operate conn --add 1.$vpi.$vci aal5 $encaps 0 1 $ret
 		xtmctl operate conn --addq 1.$vpi.$vci 0 wrr 1 # low  priority queue
-		xtmctl operate conn --addq 1.$vpi.$vci 1 wrr 1 # mid  priority queue upstream ACK's and ping from LAN will use this queue
-		xtmctl operate conn --addq 1.$vpi.$vci 7 wrr 1 # high priority queue, internal traffic dhcp igmp dns and icmp
+		xtmctl operate conn --addq 1.$vpi.$vci 7 wrr 1 # high priority queue
 		xtmctl operate conn --createnetdev 1.$vpi.$vci ${ifname%%.*}
 		xtmctl operate intf --state 1 enable
-
+		
 		brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge"
 	fi
 }
@@ -118,7 +115,7 @@ remove_netdevices() {
 	local rest
 	local x=0
 	#local baseifname
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
+	local vpivci=`xtmctl operate conn --show | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
 
 	for i in $vpivci
 	do
@@ -148,7 +145,7 @@ stop_service() {
 	echo "Stopping ADSL"
 #xtmctl stop causes IRQ issues"
 #	xtmctl stop
-	remove_netdevices
+	remove_netdevices	
 }
 
 reload_service() {
@@ -157,7 +154,7 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger layer2_interface_adsl
+        procd_add_reload_trigger layer2_interface_adsl
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_ethernet

@@ -3,27 +3,23 @@
 . /lib/functions.sh
 include /lib/network
 
-START=22
+START=21
 USE_PROCD=1
 
 get_current_status() {
-	local port="$1"
-	local media="$(ethctl $port media-type 2>&1)"
-	if echo $media | grep "1000" >/dev/null; then
-		return 0
-	elif echo $media | grep "100" >/dev/null; then
-		return 1
-	elif echo $media | grep "10" >/dev/null; then
-		return 1
-	fi
+        local port="$1"
+        local media="$(ethctl $port media-type 2>&1)"
+        if echo $media | grep "1000" >/dev/null; then
+                return 0
+        elif echo $media | grep "100" >/dev/null; then
+                return 1
+          elif echo $media | grep "10" >/dev/null; then
+                return 1
+        fi
 }
 
 removeethernet() {
-	config_get baseifname $1 baseifname
 	config_get ifname $1 ifname
-
-	ifname="${ifname:-$baseifname.1}"
-
 	vlanctl --if-delete $ifname
 	config_load layer2_interface_vlan
 	#kill all vlans related to this interface
@@ -37,9 +33,6 @@ removevlan() {
 
 	config_get baseifname $1 baseifname
 	config_get ifname $1 ifname
-
-	ifname="${ifname:-$baseifname.1}"
-
 	if [ "$wan" == "$baseifname" ]; then
 		echo "vlanctl --if-delete $ifname"
 		vlanctl --if-delete $ifname
@@ -50,36 +43,32 @@ addethernet() {
 	config_get baseifname $1 baseifname
 	config_get ifname $1 ifname
 	config_get bridge $1 bridge
-	
-	ifname="${ifname:-$baseifname.1}"
-
 	brcm_virtual_interface_rules "$baseifname" "$ifname" "$bridge"
-
+	
 }
 
 boot() {
 	local baseifname wanport portnum
 	config_load layer2_interface_ethernet
 	config_get baseifname Wan baseifname
-
-	if [ "$(db get hw.board.hardware)" != "EG300" ]; then
-		get_current_status $baseifname
-		local ret=$?
-		if [ $ret -eq 1 ]; then
-			ethctl $baseifname phy-power down
-			ethctl $baseifname phy-power up
-		fi
-	fi
+	
+	if [ "$(db get hw.board.hardware)" != "EG300" ]; then  
+	  get_current_status $baseifname
+	  local ret=$?
+	  if [ $ret -eq 1 ]; then                                                        
+	      ethctl $baseifname phy-power down
+	      ethctl $baseifname phy-power up    
+	  fi
+	fi  
 	for interf in `db get hw.board.ethernetPortOrder`; do ethswctl -c wan -i $interf -o disable ; done
 	wanport=$(db get hw.board.ethernetWanPort)
-	unit=$(echo $(get_port_number $wanport) | cut -d ' ' -f 1)
-	port=$(echo $(get_port_number $wanport) | cut -d ' ' -f 2)
-	ethswctl -c pause -n $unit -p $port -v 1
+	portnum=$(get_port_number $wanport)
+	ethswctl -c pause -p $portnum -v 1
 	ethswctl -c hw-switching -o enable
 	if [ $baseifname ]; then
 		ethswctl -c wan -i $baseifname -o enable
 	fi
-
+					    
 	if [ "`db get hw.board.tm`" == "1" ]; then
 		for interf in `db get hw.board.ethernetPortOrder`; do
 			tmctl porttminit --devtype ETH --if $interf --flag 1 || \
@@ -109,7 +98,7 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger layer2_interface_ethernet
+        procd_add_reload_trigger layer2_interface_ethernet
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_vdsl

@@ -3,7 +3,7 @@
 . /lib/functions.sh
 include /lib/network
 
-START=22
+START=21
 USE_PROCD=1
 
 checkptm() {
@@ -18,7 +18,7 @@ checkptm() {
 	fi
 
 	retur=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
+	
 	case $retur in
 		''|*[!0-9]*) return 0 ;;
 		*) return $retur ;;
@@ -38,16 +38,13 @@ ptm_inf_conf() {
 	config_get baseifname $1 baseifname
 	config_get bridge $1 bridge
 
-	ifname="${ifname:-$baseifname.1}"
-
 	checkptm $ptmprio $dslat
 	ret=$?
 
 	if [ "$ret" -eq 0 ]; then
 		xtmctl operate conn --add $dslat.$ptmprio 0 1
-		xtmctl operate conn --addq $dslat.$ptmprio 0 wrr 1 -1 -1 3000 # low  priority queue
-		xtmctl operate conn --addq $dslat.$ptmprio 1 wrr 1 -1 -1 3000 # mid  priority queue upstream ACK's and ping from LAN will use this queue
-		xtmctl operate conn --addq $dslat.$ptmprio 7 wrr 1 -1 -1 3000 # high priority queue, internal traffic dhcp igmp dns and icmp
+		xtmctl operate conn --addq $dslat.$ptmprio 0 wrr 1 -1 -1 3000
+		xtmctl operate conn --addq $dslat.$ptmprio 7 wrr 1 -1 -1 3000 # fixes pppoe disconnect issue
 		xtmctl operate conn --createnetdev $dslat.$ptmprio ${ifname%%.*}
 		xtmctl operate intf --state 1 enable
 		xtmctl start
@@ -60,7 +57,7 @@ remove_netdevices() {
 	local x=0
 
 	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
+	for i in `xtmctl operate conn --show`
 	do
 		if [ $x -eq 1 ]; then
 			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$10}')
@@ -99,7 +96,7 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger layer2_interface_vdsl
+        procd_add_reload_trigger layer2_interface_vdsl
 }
 
 

layer2interface/broadcom/etc/init.d/layer2_interface_vlan

@@ -3,7 +3,7 @@
 . /lib/functions.sh
 include /lib/network
 
-START=22
+START=21
 USE_PROCD=1
 
 vlan_inf_conf() {
@@ -16,9 +16,6 @@ vlan_inf_conf() {
 	config_get vlan8021p $1 vlan8021p
 	config_get vlan8021q $1 vlan8021q
 	config_get bridge $1 bridge
-
-	ifname="${ifname:-$baseifname.$vlan8021q}"
-
 	addbrcmvlan "$baseifname" "$vlan8021p" "$vlan8021q" "$bridge" "$ifname"
 }
 
@@ -45,6 +42,6 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger layer2_interface_vlan
+        procd_add_reload_trigger layer2_interface_vlan
 }
 

layer2interface/broadcom/lib/network/brcmwifi.sh

@@ -85,7 +85,6 @@ wlmngr_doWlConf() {
 
 	#wlctl -i wl$idx nreqd $nreqd
 	wlconf wl$idx up
-	wlctl -i wl$idx obss_coex 1
 }
 
 wlmngr_setupMbssMacAddr() {
@@ -184,7 +183,7 @@ wlmngr_startWsc()
 	nvram set wl_wps_reg="enabled"
 	nvram set lan_wps_reg=enabled #"enabled/disabled"
 	nvram set wps_uuid=0x000102030405060708090a0b0c0d0ebb
-	nvram set wps_device_name=Inteno
+	nvram set wps_device_name=BroadcomAP
 	nvram set wps_mfstring=Broadcom
 	nvram set wps_modelname=Broadcom
 	nvram set wps_modelnum=123456

layer2interface/broadcom/lib/network/vlan.sh

@@ -9,7 +9,7 @@ removeall_vlandevices()
 	local i
 
 	for i in `ls /proc/sys/net/ipv4/conf`; do
-		case "$i" in
+		case "$i" in 
 			[eap][t][mh][0-9].v1)
 			;;
 			[eap][t][mh][0-9].1)
@@ -33,13 +33,13 @@ ifvlanexits()
 
 	for i in `ls /proc/sys/net/ipv4/conf`; do
 		if [ "$i" == "$vif" ]; then
-			return 1
+			return 1 
 		fi
 	done
 	return 0
 }
 
-ifbaseexists()
+ifbaseexists ()
 {
 	local if=$1
 
@@ -58,16 +58,17 @@ ifbaseexists()
 	return 0
 }
 
-addbrcmvlan()
+addbrcmvlan ()
 {
 	local baseifname=$1
 	local vlan8021p=$2
 	local vlan8021q=$3
 	local bridge=$4
 	local ifname=$5
-
-	bridge="${bridge:-0}"
-
+	#local ifname=$4
+	#config_get baseifname $1 baseifname
+	#config_get vlan8021p $1 vlan8021p
+	#config_get vlan8021q $1 vlan8021q
 	ifbaseexists $baseifname
 	ret=$?
 	if [ "$ret" -eq 1 ]; then
@@ -85,17 +86,17 @@ addbrcmvlan()
 				typ=$(uci -q get network."$net".type)
 				proto=$(uci -q get network."$net".proto)
 				proto="${proto:-none}"
-				if [ "$typ" == "bridge" ]; then
-					bridge=1
-					if [ "$proto" == "none" ]; then
-						unmanaged=1
-						break
-					fi
+				if [ "$typ" == "bridge" -a "$proto" == "none" ]; then
+					unmanaged=1
+					break
 				fi
 			done
 
 			echo '1' > /proc/sys/net/ipv6/conf/$baseifname/disable_ipv6
 			ifconfig $baseifname up
+			if [ "x$bridge" = "x" ]; then
+				bridge=0
+			fi
 
 			if [ "$bridge" -eq 1 ]; then
 				if [ "$unmanaged" == "1" ]; then
@@ -118,7 +119,7 @@ addbrcmvlan()
 				vlanctl --if $baseifname --tx --tags 1 --filter-txif $ifname --push-tag --set-vid $vlan8021q 0 --set-pbits $vlan8021p 0 --rule-insert-before -1
 				# tags 2 tx
 				vlanctl --if $baseifname --tx --tags 2 --filter-txif $ifname --push-tag --set-vid $vlan8021q 0 --set-pbits $vlan8021p 0 --rule-insert-before -1
-				# tags 1 rx
+				# tags 1 rx				
 				vlanctl --if $baseifname --rx --tags 1 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1
 				# tags 2 rx
 				vlanctl --if $baseifname --rx --tags 2 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1
@@ -135,8 +136,8 @@ addbrcmvlan()
 				vlanctl --if $baseifname --rx --tags 1 --set-rxif $ifname --filter-vlan-dev-mac-addr 0 --drop-frame --rule-insert-before -1
 				# tags 2 rx
 				vlanctl --if $baseifname --rx --tags 2 --set-rxif $ifname --filter-vlan-dev-mac-addr 0 --drop-frame --rule-insert-before -1
-				# tags 1 rx
-				vlanctl --if $baseifname --rx --tags 1 --filter-vlan-dev-mac-addr 1 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1
+				# tags 1 rx 
+				vlanctl --if $baseifname --rx --tags 1 --filter-vlan-dev-mac-addr 1 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1	 
 				# tags 2 rx
 				vlanctl --if $baseifname --rx --tags 2 --filter-vlan-dev-mac-addr 1 --filter-vid $vlan8021q 0 --pop-tag --set-rxif $ifname --rule-insert-before -1
 			fi
@@ -147,14 +148,12 @@ addbrcmvlan()
 }
 
 
-brcm_virtual_interface_rules()
+brcm_virtual_interface_rules ()
 {
 	local baseifname=$1
 	local ifname=$2
 	local bridge=$3
 
-	bridge="${bridge:-0}"
-
 	local unmanaged=0
 	local nets net typ proto
 	nets=$(get_network_of "$ifname")
@@ -162,19 +161,18 @@ brcm_virtual_interface_rules()
 		typ=$(uci -q get network."$net".type)
 		proto=$(uci -q get network."$net".proto)
 		proto="${proto:-none}"
-
-		if [ "$typ" == "bridge" ]; then
-			bridge=1
-			if [ "$proto" == "none" ]; then
-				unmanaged=1
-				break
-			fi
+		if [ "$typ" == "bridge" -a "$proto" == "none" ]; then
+			unmanaged=1
+			break
 		fi
 	done
 
 	echo '1' > /proc/sys/net/ipv6/conf/$baseifname/disable_ipv6
 	ifconfig $baseifname up
-
+	if [ "x$bridge" = "x" ]; then                                                                                                                         
+		bridge=0
+	fi
+      
 	if [ "$bridge" -eq 1 ]; then
 		if [ "$unmanaged" == "1" ]; then
 			vlanctl --if-create-name $baseifname $ifname
@@ -201,21 +199,21 @@ brcm_virtual_interface_rules()
 		# tags 2 tx
 		vlanctl --if $baseifname --tx --tags 2 --filter-txif $ifname --rule-insert-before -1
 		# tags 0 rx
-		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --rule-insert-last
+		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --rule-insert-last 
 		# tags 1 rx
-		vlanctl --if $baseifname --rx --tags 1 --set-rxif $ifname --rule-insert-last
+		vlanctl --if $baseifname --rx --tags 1 --set-rxif $ifname --rule-insert-last 
 		# tags 2 rx
-		vlanctl --if $baseifname --rx --tags 2 --set-rxif $ifname --rule-insert-last
+		vlanctl --if $baseifname --rx --tags 2 --set-rxif $ifname --rule-insert-last 
 	else
 		# tags 1 rx
 		vlanctl --if $baseifname --rx --tags 1 --set-rxif $ifname --filter-vlan-dev-mac-addr 0 --drop-frame --rule-insert-before -1
 		# tags 2 rx
 		vlanctl --if $baseifname --rx --tags 2 --set-rxif $ifname --filter-vlan-dev-mac-addr 0 --drop-frame --rule-insert-before -1
-		# tags 0 rx
+		# tags 0 rx 
 		vlanctl --if $baseifname --rx --tags 0 --set-rxif $ifname --filter-vlan-dev-mac-addr 1 --rule-insert-before -1
 	fi
 
 	ifconfig $ifname up
-	ifconfig $ifname multicast
+	ifconfig $ifname multicast	 
 }
 

libstrophe/Config.in

@@ -1,14 +0,0 @@
-choice
-	depends on PACKAGE_libstrophe
-	prompt "Select XML library"
-	default libstrophe-expat
-
-config libstrophe-expat
-	bool "expat"
-	select PACKAGE_libexpat
-
-config libstrophe-libxml2
-	bool "libxml2"
-	select PACKAGE_libxml2
-
-endchoice

libstrophe/Makefile

@@ -1,61 +0,0 @@
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libstrophe
-PKG_VERSION:=0.8.8
-PKG_RELEASE=1
-
-PKG_SOURCE_URL:=https://github.com/strophe/libstrophe/archive/
-PKG_SOURCE:=$(PKG_VERSION).tar.gz
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_libstrophe-libxml2 \
-	CONFIG_libstrophe-expat
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_libstrophe-libxml2),y)
-CONFIGURE_ARGS += \
-	--with-libxml2
-endif
-
-define Package/libstrophe
-	SECTION:=libs
-	CATEGORY:=Libraries
-	TITLE:=XMPP client library
-	URL:=http://strophe.im/libstrophe
-	DEPENDS:= +libopenssl +libstrophe-libxml2:libxml2 +libstrophe-expat:libexpat
-	MENU:=1
-endef
-
-define Package/libstrophe/description
-	A simple, lightweight C library for writing XMPP clients
-endef
-
-define Package/libstrophe/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/ $(1)/usr/
-
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libstrophe.{la,a,so*} $(1)/usr/lib/
-endef
-
-define Package/libstrophe/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libstrophe.so.* $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,libstrophe))

libstrophe/patches/100-rename_base64_functions.patch

@@ -1,221 +0,0 @@
-diff --git a/src/auth.c b/src/auth.c
-index b3056a2..2673bdf 100644
---- a/src/auth.c
-+++ b/src/auth.c
-@@ -455,7 +455,7 @@ static int _handle_scram_sha1_challenge(xmpp_conn_t * const conn,
-         if (!text)
-             goto err;
- 
--        challenge = (char *)base64_decode(conn->ctx, text, strlen(text));
-+        challenge = (char *)strophe_base64_decode(conn->ctx, text, strlen(text));
-         xmpp_free(conn->ctx, text);
-         if (!challenge)
-             goto err;
-@@ -515,7 +515,7 @@ static char *_get_nonce(xmpp_ctx_t *ctx)
-         *(time_t *)(buffer + sizeof(clock_t)) = (time_t)rand();
-     }
- 
--    return base64_encode(ctx, buffer, sizeof(buffer));
-+    return strophe_base64_encode(ctx, buffer, sizeof(buffer));
- }
- 
- static char *_make_scram_sha1_init_msg(xmpp_conn_t * const conn)
-@@ -662,7 +662,7 @@ static void _auth(xmpp_conn_t * const conn)
-             return;
-         }
- 
--        str = (char *)base64_encode(conn->ctx, (unsigned char *)scram_init,
-+        str = (char *)strophe_base64_encode(conn->ctx, (unsigned char *)scram_init,
-                                     strlen(scram_init));
-         if (!str) {
-             xmpp_free(conn->ctx, scram_init);
-diff --git a/src/sasl.c b/src/sasl.c
-index 3d83fd0..b6f2b89 100644
---- a/src/sasl.c
-+++ b/src/sasl.c
-@@ -46,7 +46,7 @@ char *sasl_plain(xmpp_ctx_t *ctx, const char *authid, const char *password) {
- 	memcpy(msg+1, authid, idlen);
- 	msg[1+idlen] = '\0';
- 	memcpy(msg+1+idlen+1, password, passlen);
--	result = base64_encode(ctx, (unsigned char *)msg, 2 + idlen + passlen);
-+	result = strophe_base64_encode(ctx, (unsigned char *)msg, 2 + idlen + passlen);
- 	xmpp_free(ctx, msg);
-     }
- 
-@@ -92,7 +92,7 @@ static hash_t *_parse_digest_challenge(xmpp_ctx_t *ctx, const char *msg)
-     char *key, *value;
-     unsigned char *s, *t;
- 
--    text = base64_decode(ctx, msg, strlen(msg));
-+    text = strophe_base64_decode(ctx, msg, strlen(msg));
-     if (text == NULL) {
- 	xmpp_error(ctx, "SASL", "couldn't Base64 decode challenge!");
- 	return NULL;
-@@ -344,7 +344,7 @@ char *sasl_digest_md5(xmpp_ctx_t *ctx, const char *challenge,
-     hash_release(table); /* also frees value strings */
- 
-     /* reuse response for the base64 encode of our result */
--    response = base64_encode(ctx, (unsigned char *)result, strlen(result));
-+    response = strophe_base64_encode(ctx, (unsigned char *)result, strlen(result));
-     xmpp_free(ctx, result);
- 
-     return response;
-@@ -396,7 +396,7 @@ char *sasl_scram_sha1(xmpp_ctx_t *ctx, const char *challenge,
-         goto out;
-     }
- 
--    sval = (char *)base64_decode(ctx, s, strlen(s));
-+    sval = (char *)strophe_base64_decode(ctx, s, strlen(s));
-     if (!sval) {
-         goto out;
-     }
-@@ -426,7 +426,7 @@ char *sasl_scram_sha1(xmpp_ctx_t *ctx, const char *challenge,
-         sign[j] ^= key[j];
-     }
- 
--    sign_b64 = base64_encode(ctx, sign, sizeof(sign));
-+    sign_b64 = strophe_base64_encode(ctx, sign, sizeof(sign));
-     if (!sign_b64) {
-         goto out_response;
-     }
-@@ -439,7 +439,7 @@ char *sasl_scram_sha1(xmpp_ctx_t *ctx, const char *challenge,
-     strcat(response, sign_b64);
-     xmpp_free(ctx, sign_b64);
- 
--    response_b64 = base64_encode(ctx, (unsigned char *)response,
-+    response_b64 = strophe_base64_encode(ctx, (unsigned char *)response,
-                                  strlen(response));
-     if (!response_b64) {
-         goto out_response;
-@@ -501,7 +501,7 @@ int base64_encoded_len(xmpp_ctx_t *ctx, const unsigned len)
-     return ((len + 2)/3) << 2;
- }
- 
--char *base64_encode(xmpp_ctx_t *ctx, 
-+char *strophe_base64_encode(xmpp_ctx_t *ctx, 
- 		    const unsigned char * const buffer, const unsigned len)
- {
-     int clen;
-@@ -579,7 +579,7 @@ int base64_decoded_len(xmpp_ctx_t *ctx,
-     return 3 * (len >> 2) - nudge;
- }
- 
--unsigned char *base64_decode(xmpp_ctx_t *ctx,
-+unsigned char *strophe_base64_decode(xmpp_ctx_t *ctx,
- 			     const char * const buffer, const unsigned len)
- {
-     int dlen;
-diff --git a/src/sasl.h b/src/sasl.h
-index bc7511a..98c27bf 100644
---- a/src/sasl.h
-+++ b/src/sasl.h
-@@ -32,13 +32,13 @@ char *sasl_scram_sha1(xmpp_ctx_t *ctx, const char *challenge,
- 
- int base64_encoded_len(xmpp_ctx_t *ctx, const unsigned len);
- 
--char *base64_encode(xmpp_ctx_t *ctx, 
-+char *strophe_base64_encode(xmpp_ctx_t *ctx, 
- 		    const unsigned char * const buffer, const unsigned len);
- 
- int base64_decoded_len(xmpp_ctx_t *ctx,
- 		       const char * const buffer, const unsigned len);
- 
--unsigned char *base64_decode(xmpp_ctx_t *ctx,
-+unsigned char *strophe_base64_decode(xmpp_ctx_t *ctx,
- 			     const char * const buffer, const unsigned  len);
- 
- #endif /* _LIBXMPP_SASL_H__ */
-diff --git a/tests/test_base64.c b/tests/test_base64.c
-index 9e16862..82995b4 100644
---- a/tests/test_base64.c
-+++ b/tests/test_base64.c
-@@ -45,31 +45,31 @@ static const char base64_5[] =
- int test_encode(xmpp_ctx_t *ctx)
- {
-     char *result;
--    result = base64_encode(ctx, text_1, strlen(text_1));
-+    result = strophe_base64_encode(ctx, text_1, strlen(text_1));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(base64_1)) return 1;
-     if (strncmp(base64_1, result, strlen(base64_1))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_encode(ctx, text_2, strlen(text_2));
-+    result = strophe_base64_encode(ctx, text_2, strlen(text_2));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(base64_2)) return 1;
-     if (strncmp(base64_2, result, strlen(base64_2))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_encode(ctx, text_3, strlen(text_3));
-+    result = strophe_base64_encode(ctx, text_3, strlen(text_3));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(base64_3)) return 1;
-     if (strncmp(base64_3, result, strlen(base64_3))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_encode(ctx, text_4, strlen(text_4));
-+    result = strophe_base64_encode(ctx, text_4, strlen(text_4));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(base64_4)) return 1;
-     if (strncmp(base64_4, result, strlen(base64_4))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_encode(ctx, text_5, strlen(text_5));
-+    result = strophe_base64_encode(ctx, text_5, strlen(text_5));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(base64_5)) return 1;
-     if (strncmp(base64_5, result, strlen(base64_5))) return 1;
-@@ -83,31 +83,31 @@ int test_decode(xmpp_ctx_t *ctx)
- {
-     unsigned char *result;
- 
--    result = base64_decode(ctx, base64_1, strlen(base64_1));
-+    result = strophe_base64_decode(ctx, base64_1, strlen(base64_1));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(text_1)) return 1;
-     if (strncmp(text_1, result, strlen(text_1))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_decode(ctx, base64_2, strlen(base64_2));
-+    result = strophe_base64_decode(ctx, base64_2, strlen(base64_2));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(text_2)) return 1;
-     if (strncmp(text_2, result, strlen(text_2))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_decode(ctx, base64_3, strlen(base64_3));
-+    result = strophe_base64_decode(ctx, base64_3, strlen(base64_3));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(text_3)) return 1;
-     if (strncmp(text_3, result, strlen(text_3))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_decode(ctx, base64_4, strlen(base64_4));
-+    result = strophe_base64_decode(ctx, base64_4, strlen(base64_4));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(text_4)) return 1;
-     if (strncmp(text_4, result, strlen(text_4))) return 1;
-     xmpp_free(ctx,result);
- 
--    result = base64_decode(ctx, base64_5, strlen(base64_5));
-+    result = strophe_base64_decode(ctx, base64_5, strlen(base64_5));
-     if (result == NULL) return 2;
-     if (strlen(result) != strlen(text_5)) return 1;
-     if (strncmp(text_5, result, strlen(text_5))) return 1;
-@@ -130,13 +130,13 @@ int main(int argc, char *argv[])
- 
-     printf("testing encode... ");   
-     ret = test_encode(ctx);
--    if (ret) printf("base64_encode failed!\n");
-+    if (ret) printf("strophe_base64_encode failed!\n");
-     if (ret) return ret;
-     printf("ok.\n");
- 
-     printf("testing decode... ");   
-     ret = test_decode(ctx);
--    if (ret) printf("base64_decode failed!\n");
-+    if (ret) printf("strophe_base64_decode failed!\n");
-     if (ret) return ret;
-     printf("ok.\n");
- 

lmbench/Makefile

@@ -1,122 +0,0 @@
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=lmbench
-PKG_VERSION:=3.0-a9
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tgz
-PKG_SOURCE_URL:=@SF/lmbench/
-PKG_MD5SUM:=b3351a3294db66a72e2864a199d37cbf
-
-PKG_BUILD_DEPENDS:=librpc
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lmbench
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=lmbench microbenchmarks
-  URL:=http://sourceforge.net/projects/lmbench
-  MENU:=1
-endef
-
-define Package/lmbench/description
-  lmbench is a series of micro benchmarks intended to measure basic operating
-  system and hardware system metrics.
-endef
-
-define Package/lmbench/install
-	true
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src \
-		CC="$(TARGET_CC)" \
-		AR="$(TARGET_CROSS)ar" \
-		OS="$(ARCH)" \
-		BASE="$(PKG_INSTALL_DIR)" \
-		LDLIBS="-lrpc" \
-		COMPILE="$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_CPPFLAGS) $(TARGET_LDFLAGS)" \
-		lmbench install
-endef
-
-define PartGen
-define Package/lmbench-$(subst _,-,$(1))
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=$(1) microbenchmark
-  URL:=http://sourceforge.net/projects/lmbench
-  DEPENDS:=lmbench +librpc
-endef
-endef
-
-define PartInstall
-define Package/lmbench-$(subst _,-,$(1))/install
-	$(INSTALL_DIR) $$(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/bin/$(1) $$(1)/usr/sbin/$(1)
-endef
-endef
-
-LMBENCH_FILES:= \
-	bw_file_rd \
-	bw_mem \
-	bw_mmap_rd \
-	bw_pipe \
-	bw_tcp \
-	bw_unix \
-	cache \
-	disk \
-	enough \
-	flushdisk \
-	hello \
-	lat_cmd \
-	lat_connect \
-	lat_ctx \
-	lat_dram_page \
-	lat_fcntl \
-	lat_fifo \
-	lat_fs \
-	lat_http \
-	lat_mem_rd \
-	lat_mmap \
-	lat_ops \
-	lat_pagefault \
-	lat_pipe \
-	lat_pmake \
-	lat_proc \
-	lat_rand \
-	lat_rpc \
-	lat_select \
-	lat_sem \
-	lat_sig \
-	lat_syscall \
-	lat_tcp \
-	lat_udp \
-	lat_unix \
-	lat_unix_connect \
-	lat_usleep \
-	line \
-	lmdd \
-	lmhttp \
-	loop_o \
-	memsize \
-	mhz \
-	msleep \
-	par_mem \
-	par_ops \
-	stream \
-	timing_o \
-	tlb
-
-$(foreach file,$(LMBENCH_FILES),$(eval $(call PartGen,$(file))))
-$(foreach file,$(LMBENCH_FILES),$(eval $(call PartInstall,$(file))))
-
-$(eval $(call BuildPackage,lmbench))
-$(foreach file,$(LMBENCH_FILES),$(eval $(call BuildPackage,lmbench-$(subst _,-,$(file)))))

lmbench/patches/001-fix_socklen_t_define.patch

@@ -1,11 +0,0 @@
---- a/src/bench.h
-+++ b/src/bench.h
-@@ -77,7 +77,7 @@ typedef long long int64;
- #endif /* HAVE_int64_t */
- #endif /* HAVE_int64 */
- 
--#ifndef HAVE_socklen_t
-+#if (!defined(HAVE_socklen_t) && !defined(__socklen_t_defined))
- typedef int socklen_t;
- #endif
- 

lmbench/patches/002-install-cache.patch

@@ -1,10 +0,0 @@
---- a/src/Makefile
-+++ b/src/Makefile
-@@ -144,6 +144,7 @@ install-target:
- 	if [ ! -d $(BASE)/include ]; then mkdir $(BASE)/include; fi
- 	if [ ! -d $(BASE)/lib ]; then mkdir $(BASE)/lib; fi
- 	cp $(EXES) $(BASE)/bin
-+	cp $(OPT_EXES) $(BASE)/bin
- 	cp $(INCS) $(BASE)/include
- 	cp $O/lmbench.a $(BASE)/lib/libmbench.a
- 	cd ../doc; env MAKEFLAGS="$(MAKEFLAGS)" make CC="${CC}" OS="${OS}" BASE="$(BASE)" install

lmbench/patches/003-add-LDLIBS.patch

@@ -1,30 +0,0 @@
---- a/scripts/build
-+++ b/scripts/build
-@@ -18,7 +18,7 @@ done
- 
- trap 'rm -f ${BASE}$$.s ${BASE}$$.c ${BASE}$$.o ${BASE}$$; exit 1' 1 2 15
- 
--LDLIBS=-lm
-+LDLIBS=${LDLIBS-"-lm -lrpc"}
- 
- # check for HP-UX's ANSI compiler
- echo "main(int ac, char *av[]) { int i; }" > ${BASE}$$.c
---- a/src/Makefile
-+++ b/src/Makefile
-@@ -38,6 +38,7 @@ CC=`../scripts/compiler`
- MAKE=`../scripts/make`
- AR=ar
- ARCREATE=cr
-+LDLIBS=
- 
- # base of installation location
- BASE=/usr/local
-@@ -111,7 +112,7 @@ LIBOBJS= $O/lib_tcp.o $O/lib_udp.o $O/li
- 	$O/lib_sched.o
- 
- lmbench: $(UTILS)
--	@env CFLAGS=-O MAKE="$(MAKE)" MAKEFLAGS="$(MAKEFLAGS)" CC="$(CC)" OS="$(OS)" ../scripts/build all
-+	@env CFLAGS=-O MAKE="$(MAKE)" MAKEFLAGS="$(MAKEFLAGS)" CC="$(CC)" OS="$(OS)" LDLIBS="$(LDLIBS)" ../scripts/build all
- 	-@env CFLAGS=-O MAKE="$(MAKE)" MAKEFLAGS="k$(MAKEFLAGS)" CC="$(CC)" OS="$(OS)" ../scripts/build opt
- 
- results: lmbench

lmbench/patches/100-bw_mem-add-newline-after-usage.patch

@@ -1,11 +0,0 @@
---- a/src/bw_mem.c
-+++ b/src/bw_mem.c
-@@ -65,7 +65,7 @@ main(int ac, char **av)
- 	size_t	nbytes;
- 	state_t	state;
- 	int	c;
--	char	*usage = "[-P <parallelism>] [-W <warmup>] [-N <repetitions>] <size> what [conflict]\nwhat: rd wr rdwr cp fwr frd fcp bzero bcopy\n<size> must be larger than 512";
-+	char	*usage = "[-P <parallelism>] [-W <warmup>] [-N <repetitions>] <size> what [conflict]\nwhat: rd wr rdwr cp fwr frd fcp bzero bcopy\n<size> must be larger than 512\n";
- 
- 	state.overhead = 0;
- 

logrotate/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=logrotate
-PKG_VERSION:=3.7.1
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).orig.tar.gz
-PKG_SOURCE_URL:=http://ftp.de.debian.org/debian/pool/main/l/logrotate
-PKG_MD5SUM:=552639142e163745f6bcd4f1f3816d8a
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/logrotate
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libpopt
-  TITLE:=rotates, compresses, and mails system logs
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default, \
-		RPM_OPT_FLAGS="$(TARGET_CFLAGS) $(EXTRA_CPPFLAGS)" \
-		LDFLAGS="$(EXTRA_LDFLAGS)" \
-		logrotate \
-	)
-endef
-
-define Package/logrotate/install	
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) ${PKG_BUILD_DIR}/logrotate $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc
-	$(CP) ./files/logrotate.conf $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/logrotate.d
-endef
-
-$(eval $(call BuildPackage,logrotate))

logrotate/files/logrotate.conf

@@ -1,30 +0,0 @@
-# rotate log files weekly
-weekly
-#daily
-
-# keep 4 weeks worth of backlogs
-rotate 4
-
-# create new (empty) log files after rotating old ones
-create
-
-notifempty
-nomail
-#olddir /var/log/backup/
-missingok
-#dateext
-
-# uncomment this if you want your log files compressed
-#compress
-
-# packages can drop log rotation information into this directory
-include /etc/logrotate.d
-
-# no packages own lastlog or wtmp -- we'll rotate them here
-#/var/log/wtmp {
-#    monthly
-#    create 0664 root utmp
-#    rotate 1
-#}
-
-# system-specific logs may be also be configured here.

logrotate/patches/01-dateext_maxage.patch

@@ -1,433 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/config.c logrotate-3.7.1/config.c
---- logrotate-3.7.1.orig/config.c	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/config.c	2005-05-24 12:21:09.000000000 -0400
-@@ -511,6 +511,14 @@
- 		newlog->flags &= ~LOG_FLAG_IFEMPTY;
- 
- 		*endtag = oldchar, start = endtag;
-+	    } else if (!strcmp(start, "dateext")) {
-+		newlog->flags |= LOG_FLAG_DATEEXT;
-+
-+		*endtag = oldchar, start = endtag;
-+	    } else if (!strcmp(start, "nodateext")) {
-+		newlog->flags &= ~LOG_FLAG_DATEEXT;
-+
-+		*endtag = oldchar, start = endtag;
- 	    } else if (!strcmp(start, "noolddir")) {
- 		newlog->oldDir = NULL;
- 
-@@ -670,6 +678,21 @@
- 		    }
- 		    *endtag = oldchar, start = endtag;
- 		}
-+	    } else if (!strcmp(start, "maxage")) {
-+		*endtag = oldchar, start = endtag;
-+
-+		if (!isolateValue(configFile, lineNum, "maxage count", &start,
-+				  &endtag)) {
-+		    oldchar = *endtag, *endtag = '\0';
-+
-+		    newlog->rotateAge = strtoul(start, &chptr, 0);
-+		    if (*chptr || newlog->rotateAge < 0) {
-+			message(MESS_ERROR, "%s:%d bad maximum age '%s'\n",
-+				configFile, lineNum, start);
-+			return 1;
-+		    }
-+		    *endtag = oldchar, start = endtag;
-+		}
- 	    } else if (!strcmp(start, "errors")) {
- 		message(MESS_DEBUG, "%s: %d: the errors directive is deprecated and no longer used.\n",
- 			configFile, lineNum);
-diff -u -ruN logrotate-3.7.1.orig/logrotate.8 logrotate-3.7.1/logrotate.8
---- logrotate-3.7.1.orig/logrotate.8	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/logrotate.8	2005-05-24 12:21:09.000000000 -0400
-@@ -200,6 +200,11 @@
- Log files are rotated every day.
- 
- .TP
-+\fBdateext\fR
-+Archive old versions of log files adding a daily extension like YYYYMMDD
-+instead of simply adding a number.
-+
-+.TP
- \fBdelaycompress\fR
- Postpone compression of the previous log file to the next rotation cycle.
- This has only effect when used in combination with \fBcompress\fR.
-@@ -246,6 +251,12 @@
- instead of the just-rotated file (this is the default).
- 
- .TP
-+\fBmaxage\fR \fIcount\fR
-+Remove rotated logs older than <count> days. The age is only checked
-+if the logfile is to be rotated. The files are mailed to the
-+configured address if \fBmaillast\fR and \fBmail\fR are configured.
-+
-+.TP
- \fBmissingok\fR
- If the log file is missing, go on to the next one without issuing an error
- message. See also \fBnomissingok\fR.
-diff -u -ruN logrotate-3.7.1.orig/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1.orig/logrotate.c	2004-10-19 17:41:24.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-24 12:21:09.000000000 -0400
-@@ -11,6 +11,7 @@
- #include <sys/wait.h>
- #include <time.h>
- #include <unistd.h>
-+#include <glob.h>
- 
- #ifdef WITH_SELINUX
- #include <selinux/selinux.h>
-@@ -22,6 +23,10 @@
- #include "log.h"
- #include "logrotate.h"
- 
-+#if !defined(GLOB_ABORTED) && defined(GLOB_ABEND)
-+#define GLOB_ABORTED GLOB_ABEND
-+#endif
-+
- typedef struct {
-     char * fn;
-     struct tm lastRotated;	/* only tm.mon, tm_mday, tm_year are good! */
-@@ -42,6 +47,14 @@
- char * mailCommand = DEFAULT_MAIL_COMMAND;
- time_t nowSecs = 0;
- 
-+static int globerr(const char * pathname, int theerr) {
-+    message(MESS_ERROR, "error accessing %s: %s\n", pathname,
-+	strerror(theerr));
-+
-+    /* We want the glob operation to continue, so return 0 */
-+    return 1;
-+}
-+
- static logState * findState(const char * fn, struct stateSet * sip) {
-     int i;
-     logState * states = sip->states;
-@@ -49,9 +62,11 @@
-     struct tm now = *localtime(&nowSecs);
-     time_t lr_time;
- 
-+    /* find the filename fn in the statesPtr list */
-     for (i = 0; i < numStates; i++) 
- 	if (!strcmp(fn, states[i].fn)) break;
- 
-+    /* not in statesPtr list, so add new entry */
-     if (i == numStates) {
- 	i = numStates++;
- 	states = realloc(states, sizeof(*states) * numStates);
-@@ -121,6 +136,17 @@
-     return rc;
- }
- 
-+static int removeLogFile(char * name) {
-+    message(MESS_DEBUG, "removing old log %s\n", name);
-+
-+    if (!debug && unlink(name)) {
-+	message(MESS_ERROR, "Failed to remove old log %s: %s\n",
-+		name, strerror(errno));
-+	return 1;
-+    }
-+    return 0;
-+}
-+
- static int compressLogFile(char * name, logInfo * log, struct stat *sb) {
-     char * compressedName;
-     const char ** fullCommand;
-@@ -265,6 +291,25 @@
-     return rc;
- }
- 
-+static int mailLogWrapper (char * mailFilename, char * mailCommand, int logNum, logInfo * log) {
-+    /* if the log is compressed (and we're not mailing a
-+     * file whose compression has been delayed), we need
-+     * to uncompress it */
-+    if ((log->flags & LOG_FLAG_COMPRESS) &&
-+	!((log->flags & LOG_FLAG_DELAYCOMPRESS) &&
-+	    (log->flags & LOG_FLAG_MAILFIRST))) {
-+	if (mailLog(mailFilename, mailCommand,
-+		    log->uncompress_prog, log->logAddress,
-+		    log->files[logNum]))
-+	    return 1;
-+    } else {
-+	if (mailLog(mailFilename, mailCommand, NULL,
-+		    log->logAddress, mailFilename))
-+	    return 1;
-+    }
-+    return 0;
-+}
-+
- static int copyTruncate(char * currLog, char * saveLog, struct stat * sb, int flags) {
-     char buf[BUFSIZ];
-     int fdcurr = -1, fdsave = -1;
-@@ -479,6 +524,9 @@
-     char * baseName;
-     char * dirName;
-     char * firstRotated;
-+    char * glob_pattern;
-+    glob_t globResult;
-+    int rc;
-     size_t alloc_size;
-     int rotateCount = log->rotateCount ? log->rotateCount : 1;
-     int logStart = (log->logStart == -1) ? 1 : log->logStart;
-@@ -509,7 +557,7 @@
- 
-     alloc_size = strlen(dirName) + strlen(baseName) + 
-                  strlen(log->files[logNum]) + strlen(fileext) +
--                 strlen(compext) + 10;
-+                 strlen(compext) + 18;
-     
-     oldName = alloca(alloc_size);
-     newName = alloca(alloc_size);
-@@ -531,16 +579,116 @@
-     /* First compress the previous log when necessary */
-     if (log->flags & LOG_FLAG_COMPRESS &&
-         log->flags & LOG_FLAG_DELAYCOMPRESS) {
--        struct stat sbprev;
--	
--        sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
--        if (stat(oldName, &sbprev)) {
--            message(MESS_DEBUG, "previous log %s does not exist\n",
--		    oldName);
--        } else {
--	    hasErrors = compressLogFile(oldName, log, &sbprev);
-+	if (log->flags & LOG_FLAG_DATEEXT) {
-+	               /* glob for uncompressed files with our pattern */
-+	    glob_pattern = malloc(strlen(dirName) + strlen(baseName)
-+				  + strlen(fileext) + 44 );
-+	    sprintf(glob_pattern,
-+		    "%s/%s-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]%s",
-+		    dirName, baseName, fileext);
-+	    rc = glob(glob_pattern, 0, globerr, &globResult);
-+	    if (!rc && globResult.gl_pathc > 0) {
-+		for (i = 0; i < globResult.gl_pathc && !hasErrors; i++) {
-+		    struct stat sbprev;
-+		    sprintf(oldName,"%s",(globResult.gl_pathv)[i]);
-+		    if (stat(oldName, &sbprev)) {
-+			message(MESS_DEBUG, "previous log %s does not exist\n", oldName);
-+		    } else {
-+			hasErrors = compressLogFile(oldName, log, &sbprev);
-+		    }
-+		}
-+	    } else {
-+		message (MESS_DEBUG, "glob finding logs to compress failed\n");
-+		/* fallback to old behaviour */
-+		sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+	    }
-+	    globfree(&globResult);
-+	    free(glob_pattern);
-+	} else {
-+	    struct stat sbprev;
-+
-+	    sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+	    if (stat(oldName, &sbprev)) {
-+		message(MESS_DEBUG, "previous log %s does not exist\n",
-+			oldName);
-+	    } else {
-+		hasErrors = compressLogFile(oldName, log, &sbprev);
-+	    }
- 	}
-     }
-+
-+    firstRotated = alloca(strlen(dirName) + strlen(baseName) +
-+			  strlen(fileext) + strlen(compext) + 30);
-+
-+    if(log->flags & LOG_FLAG_DATEEXT) {
-+	/* glob for compressed files with our pattern
-+	 * and compress ext */
-+	glob_pattern = malloc(strlen(dirName)+strlen(baseName)
-+			      +strlen(fileext)+strlen(compext)+44);
-+	sprintf(glob_pattern,
-+		"%s/%s-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]%s%s",
-+		dirName, baseName, fileext, compext);
-+	rc = glob(glob_pattern, 0, globerr, &globResult);
-+	if (!rc) {
-+	    /* search for files to drop, if we find one remember it,
-+	     * if we find another one mail and remove the first and
-+	     * remember the second and so on */
-+	    struct stat fst_buf;
-+	    int mail_out = -1;
-+	    /* remove the first (n - rotateCount) matches
-+	     * no real rotation needed, since the files have
-+	     * the date in their name */
-+	    for (i = 0; i < globResult.gl_pathc; i++) {
-+		if( !stat((globResult.gl_pathv)[i],&fst_buf) ) {
-+		    if ((i <= ((int)globResult.gl_pathc - rotateCount)) 
-+			|| ((log->rotateAge > 0)
-+			    && (((nowSecs - fst_buf.st_mtime)/60/60/24)
-+				> log->rotateAge))) {
-+			if ( mail_out != -1 ) {
-+			    if (!hasErrors && log->logAddress) {
-+				char * mailFilename = (globResult.gl_pathv)[mail_out];
-+				hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-+				if (!hasErrors)
-+				    hasErrors = removeLogFile(mailFilename);
-+			    }
-+			}
-+			mail_out = i;
-+		    }
-+		}
-+	    }
-+	    if ( mail_out != -1 ) {
-+		/* oldName is oldest Backup found (for unlink later) */
-+		sprintf(oldName, "%s", (globResult.gl_pathv)[mail_out]);
-+		strcpy(disposeName, oldName);
-+	    } else
-+		disposeName = NULL;
-+	} else {
-+	    message (MESS_DEBUG, "glob finding old rotated logs failed\n");
-+	    disposeName = NULL;
-+	}
-+	/* firstRotated is most recently created/compressed rotated log */
-+	sprintf(firstRotated, "%s/%s-%04d%02d%02d%s%s",
-+		dirName, baseName, now.tm_year+1900,
-+		now.tm_mon+1, now.tm_mday, fileext, compext);
-+	globfree(&globResult);
-+	free(glob_pattern);
-+    } else {
-+	if ( log->rotateAge ) {
-+	    struct stat fst_buf;
-+	    for (i=1; i <= rotateCount; i++) {
-+		sprintf(oldName, "%s/%s.%d%s%s", dirName, baseName,
-+			rotateCount + 1, fileext, compext);
-+		if(!stat(oldName,&fst_buf)
-+		    && (((nowSecs - fst_buf.st_mtime)/60/60/24)
-+			> log->rotateAge)) {
-+		    char * mailFilename = (globResult.gl_pathv)[i];
-+		    if (!hasErrors && log->logAddress)
-+			hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-+		    if (!hasErrors)
-+			hasErrors = removeLogFile(mailFilename);
-+		}
-+	    }
-+	}
-     
-     sprintf(oldName, "%s/%s.%d%s%s", dirName, baseName,
-             logStart + rotateCount, fileext, compext);
-@@ -548,8 +696,6 @@
-     
-     strcpy(disposeName, oldName);
-     
--    firstRotated = alloca(strlen(dirName) + strlen(baseName) +
--                          strlen(fileext) + strlen(compext) + 30);
-     sprintf(firstRotated, "%s/%s.%d%s%s", dirName, baseName,
-             logStart, fileext, 
- 	    (log->flags & LOG_FLAG_DELAYCOMPRESS) ? "" : compext);
-@@ -600,12 +746,27 @@
- 	    }
- 	}
-     }
--    
-+    } /* !LOG_FLAG_DATEEXT */
-+ 
-     finalName = oldName;
--    
--    /* note: the gzip extension is *not* used here! */
--    sprintf(finalName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
--    
-+
-+    if(log->flags & LOG_FLAG_DATEEXT) {
-+	char * destFile = alloca(strlen(dirName) + strlen(baseName) +
-+				 strlen(fileext) + strlen(compext) + 30);
-+	struct stat fst_buf;
-+	sprintf(finalName, "%s/%s-%04d%02d%02d%s",
-+		dirName, baseName, now.tm_year+1900,
-+		now.tm_mon+1, now.tm_mday, fileext);
-+	sprintf(destFile, "%s%s", finalName, compext);
-+	if(!stat(destFile,&fst_buf)) {
-+	    message (MESS_DEBUG, "destination %s already exists, skipping rotation\n", firstRotated);
-+	    hasErrors = 1;
-+	}
-+    } else {
-+	/* note: the gzip extension is *not* used here! */
-+	sprintf(finalName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+    }
-+ 
-     /* if the last rotation doesn't exist, that's okay */
-     if (!debug && access(disposeName, F_OK)) {
-         message(MESS_DEBUG, "log %s doesn't exist -- won't try to "
-@@ -613,9 +774,6 @@
-         disposeName = NULL;
-     } 
-     
--    free(dirName);
--    free(baseName);
--    
-     if (!hasErrors) {
-         if (log->pre && !(log->flags & LOG_FLAG_SHAREDSCRIPTS)) {
-             message(MESS_DEBUG, "running prerotate script\n");
-@@ -722,33 +880,12 @@
-             else
-                 mailFilename = disposeName;
- 
--            if (mailFilename) {
--		/* if the log is compressed (and we're not mailing a
--		   file whose compression has been delayed), we need
--		   to uncompress it */
--                if ((log->flags & LOG_FLAG_COMPRESS) &&
--		    !((log->flags & LOG_FLAG_DELAYCOMPRESS) &&
--		      (log->flags & LOG_FLAG_MAILFIRST))) {
--		    if (mailLog(mailFilename, mailCommand, 
--				log->uncompress_prog, log->logAddress, 
--				log->files[logNum])) 
--			hasErrors = 1;
--		} else {
--		    if (mailLog(mailFilename, mailCommand, NULL, 
--			        log->logAddress, mailFilename))
--			hasErrors = 1;
--		}
--	    }
-+            if (mailFilename)
-+		hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-         }
- 	
-         if (!hasErrors && disposeName) {
--            message(MESS_DEBUG, "removing old log %s\n", disposeName);
--	    
--            if (!debug && unlink(disposeName)) {
--                message(MESS_ERROR, "Failed to remove old log %s: %s\n",
--			disposeName, strerror(errno));
--                hasErrors = 1;
--	    }
-+	    hasErrors = removeLogFile(disposeName);
- 	}
-     }
-     
-@@ -761,6 +898,8 @@
- 	  }
- 	}
- #endif
-+    free(dirName);
-+    free(baseName);
-     return hasErrors;
- }
- 
-@@ -1047,7 +1186,9 @@
- 
- int main(int argc, const char ** argv) {
-     logInfo defConfig = { NULL, NULL, 0, NULL, ROT_SIZE, 
--			  /* threshHold */ 1024 * 1024, 0,
-+			  /* threshHold */ 1024 * 1024,
-+			  /* rotateCount */ 0,
-+			  /* rotateAge */ 0,
- 			  /* log start */ -1,
- 			  /* pre, post */ NULL, NULL,
- 			  /* first, last */ NULL, NULL,
-diff -u -ruN logrotate-3.7.1.orig/logrotate.h logrotate-3.7.1/logrotate.h
---- logrotate-3.7.1.orig/logrotate.h	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/logrotate.h	2005-05-24 12:21:09.000000000 -0400
-@@ -15,6 +15,7 @@
- #define LOG_FLAG_MAILFIRST	(1 << 6)
- #define LOG_FLAG_SHAREDSCRIPTS	(1 << 7)
- #define LOG_FLAG_COPY		(1 << 8)
-+#define LOG_FLAG_DATEEXT	(1 << 9)
- 
- #define NO_FORCE_ROTATE 0
- #define FORCE_ROTATE    1
-@@ -34,6 +35,7 @@
-     enum { ROT_DAYS, ROT_WEEKLY, ROT_MONTHLY, ROT_SIZE, ROT_FORCE } criterium;
-     unsigned int threshhold;
-     int rotateCount;
-+    int rotateAge;
-     int logStart;
-     char * pre, * post, * first, * last;
-     char * logAddress;

logrotate/patches/02-datehack.patch

@@ -1,12 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1.orig/logrotate.c	2004-10-19 17:41:24.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-24 12:12:26.000000000 -0400
-@@ -1002,7 +1002,7 @@
- 	}
- 	
- 	/* Hack to hide earlier bug */
--	if ((year != 1900) && (year < 1996 || year > 2100)) {
-+	if ((year != 1900) && (year < 1970 || year > 2100)) {
- 	    message(MESS_ERROR, "bad year %d for file %s in state file %s\n",
- 		    year, argv[0], stateFilename);
- 	    fclose(f);

logrotate/patches/03-ignore_hidden.patch

@@ -1,14 +0,0 @@
---- logrotate-3.7/config.c.orig	2005-04-26 22:57:53.000000000 -0400
-+++ logrotate-3.7/config.c	2005-04-26 22:59:36.000000000 -0400
-@@ -142,6 +142,11 @@
- 	(!fname[1] || (fname[1] == '.' && !fname[2])))
- 	return 0;
- 
-+    /* Don't include 'hidden' files either; this breaks Gentoo 
-+       portage config file management http://bugs.gentoo.org/87683 */
-+    if (fname[0] == '.')
-+	return 0;
-+
-     /* Check if fname is ending in a taboo-extension; if so, return
-        false */
-     for (i = 0; i < tabooCount; i++) {

logrotate/patches/04-no_tmpdir.patch

@@ -1,54 +0,0 @@
-diff -u -ruN logrotate-3.7.1-cur/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1-cur/logrotate.c	2005-05-25 18:20:41.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-25 18:21:10.000000000 -0400
-@@ -90,10 +90,7 @@
- }
- 
- static int runScript(char * logfn, char * script) {
--    int fd;
--    char *filespec;
-     int rc;
--    char buf[256];
- 
-     if (debug) {
- 	message(MESS_DEBUG, "running script with arg %s: \"%s\"\n", 
-@@ -101,38 +98,12 @@
- 	return 0;
-     }
- 
--    filespec = buf;
--    snprintf(buf, sizeof(buf), "%s/logrotate.XXXXXX", getenv("TMPDIR") ?: "/tmp");
--    fd = -1;
--    if (!filespec || (fd = mkstemp(filespec)) < 0 || fchmod(fd, 0700)) {
--	message(MESS_DEBUG, "error creating %s: %s\n", filespec,
--		strerror(errno));
--	if (fd >= 0) {
--	    close(fd);
--	    unlink(filespec);
--	}
--	return -1;
--    }
--
--    if (write(fd, "#!/bin/sh\n\n", 11) != 11 ||
--	write(fd, script, strlen(script)) != strlen(script)) {
--	message(MESS_DEBUG, "error writing %s\n", filespec);
--	close(fd);
--	unlink(filespec);
--	return -1;
--    }
--
--    close(fd);
--
-     if (!fork()) {
--	execlp(filespec, filespec, logfn, NULL);
-+	execl("/bin/sh", "sh", "-c", script, NULL);
- 	exit(1);
-     }
- 
-     wait(&rc);
--
--    unlink(filespec);
--
-     return rc;
- }
- 

logrotate/patches/05-taboo_to_debug.patch

@@ -1,12 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/config.c logrotate-3.7.1/config.c
---- logrotate-3.7.1.orig/config.c	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/config.c	2005-05-24 12:13:41.000000000 -0400
-@@ -147,7 +147,7 @@
-     for (i = 0; i < tabooCount; i++) {
- 	if (!strcmp(fname + strlen(fname) - strlen(tabooExts[i]),
- 	    tabooExts[i])) {
--	    message(MESS_ERROR, "Ignoring %s, because of %s "
-+	    message(MESS_DEBUG, "Ignoring %s, because of %s "
- 		    "ending\n", fname, tabooExts[i]);
- 
- 	    return 0;

logrotate/patches/06-weekly.patch

@@ -1,22 +0,0 @@
---- logrotate-3.7.1-old/logrotate.c	2004-10-19 23:41:24.000000000 +0200
-+++ logrotate-3.7.1-new/logrotate.c	2005-10-02 17:29:22.380767321 +0200
-@@ -424,12 +424,15 @@ int findNeedRotating(logInfo * log, int 
-         switch (log->criterium) {
-           case ROT_WEEKLY:
-             /* rotate if:
--                  1) the current weekday is before the weekday of the
--                     last rotation
-+                  1) the day of the week is the same as the day of the week of
-+                     the previous rotation but not the same day of the year
-+                     this will rotate it on the same day every week, but not
-+                     twice a day.
-                   2) more then a week has passed since the last
-                      rotation */
--            state->doRotate = ((now.tm_wday < state->lastRotated.tm_wday) ||
--			       ((mktime(&now) - mktime(&state->lastRotated)) >
-+            state->doRotate = ((now.tm_wday == state->lastRotated.tm_wday &&
-+				now.tm_yday != state->lastRotated.tm_yday) ||
-+				((mktime(&now) - mktime(&state->lastRotated)) >
- 				(7 * 24 * 3600)));
-             break;
-           case ROT_MONTHLY:

multiwan/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2010-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=multiwan
-PKG_VERSION:=1.0.22
-PKG_RELEASE:=2
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/multiwan
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+ip +iptables +kmod-ipt-conntrack +iptables-mod-conntrack-extra +iptables-mod-ipopt
-  TITLE:=Simple multi WAN configuration
-  URL:=ftp://ftp.netlab7.com/
-  MAINTAINER:=Craig M. Coffee <craigc@netlab7.com>
-endef
-
-define Package/multiwan/description
-An agent script that makes Multi-WAN configuration simple,
-easy and manageable. Complete with load balancing, failover and an easy
-to manage traffic ruleset.
-endef
-
-define Package/multiwan/conffiles
-/etc/config/multiwan
-endef
-
-define Build/Compile
-endef
-
-define Package/multiwan/install
-	$(CP) ./files/* $(1)
-endef
-
-define Package/multiwan/postinst
-[ -n "$${IPKG_INSTROOT}" ] || /etc/init.d/multiwan enable
-exit 0
-endef
-
-$(eval $(call BuildPackage,multiwan))

multiwan/files/etc/config/multiwan

@@ -1,57 +0,0 @@
-
-config 'multiwan' 'config'
-	# REMOVE THIS LINE OR PUT TO 1 TO ENABLE MULTIWAN
-	option 'enabled' '0'
-
-	option 'default_route' 'balancer'
-	# health_monitor below is defaulted to parallel, and can be set to
-	# serial to save system resources.
-	# option 'health_monitor' 'serial'
-	# option 'debug' '1'
-
-config 'interface' 'wan'
-	option 'weight' '10'
-	option 'health_interval' '10'
-	option 'icmp_hosts' 'dns'
-	# icmp_count is defaulted to 1, and can be increased to reduce
-	# false positives.
-	# option 'icmp_count' '3'
-	option 'timeout' '3'
-	option 'health_fail_retries' '3'
-	option 'health_recovery_retries' '5'
-	option 'failover_to' 'wwan'
-	option 'dns' 'auto'
-
-config 'interface' 'wwan'
-	option 'weight' '10'
-	option 'health_interval' '10'
-	option 'icmp_hosts' 'gateway'
-	option 'timeout' '3'
-	option 'health_fail_retries' '3'
-	option 'health_recovery_retries' '5'
-	option 'failover_to' 'balancer'
-	option 'dns' '208.67.222.222 208.67.220.220'
-
-#config 'mwanfw'
-#	option 'src' '192.168.1.0/24'
-#	option 'dst' 'ftp.netlab7.com'
-#	option 'proto' 'tcp'
-#	option 'ports' '21'
-#	option 'wanrule' 'wan2'
-
-# VoIP traffic goes through wan
-# config 'mwanfw'
-	# option 'src' '192.168.1.0/24'
-	# option 'proto' 'udp'
-	# option 'port_type' 'source-ports'
-	# option 'ports' '5060,16384:16482'
-	# option 'wanrule' 'wan'
-
-#config 'mwanfw'
-#	option 'src' '192.168.0.3'
-#	option 'proto' 'icmp'
-#	option 'wanrule' 'balancer'
-
-#config 'mwanfw'
-#	option 'dst' 'www.whatismyip.com'
-#	option 'wanrule' 'fastbalancer'

multiwan/files/etc/init.d/multiwan

@@ -1,25 +0,0 @@
-#!/bin/sh /etc/rc.common
-START=99
-EXTRA_COMMANDS="single"
-USE_PROCD=1
-
-start_service () {
-   /usr/bin/multiwan agent &
-}
-
-stop_service () {
-  sh /usr/bin/multiwan stop
-}
-
-reload_service () {
-  /usr/bin/multiwan restart &
-}
-
-single () {
-  /usr/bin/multiwan single &
-}
-
-service_triggers() {
-        procd_add_reload_trigger multiwan
-}
-

natalie-dect-h/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=natalie-dect-h
-PKG_VERSION:=12.26
+PKG_VERSION:=11.19
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://public.inteno.se:/natalie-dect-h
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9e2236989ff58d0db897f938b6b07b535144e0e2
+PKG_SOURCE_VERSION:=c2139d05e3d082f1dcf58ce3f19306cb76fd0873
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk