easy-soc-libs: libeasy-1.0.1

-------------------------------------------------------------------------------
* 0accbd7 libwifi: intel: show chan utilization instead of load
-------------------------------------------------------------------------------
commit 0accbd7266b2742ad8921edd5dab974fc384a49a
Author: Anjan Chanda <anjan.chanda@iopsys.eu>
Date: 2019-11-27 10:19:28 +0100

    libwifi: intel: show chan utilization instead of load

Base directory -> /
 libwifi/modules/intel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
-------------------------------------------------------------------------------

4g-support/Makefile

@@ -1,31 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=4g-support
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/4g-support
-  CATEGORY:=Network
-  TITLE:=4G Network Setup Tools
-endef
-
-define Package/4g-support/description
-	4g-support contains necessary tools to setup 4G WAN connection
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/4g-support/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -1,62 +0,0 @@
-opengt
-set com 115200n81
-set comecho off
-set senddelay 0.05
-waitquiet 1 0.2
-
-:start
- if $env("USE_DISCONNECT")="1" goto disconnect
- send "AT^^NDISDUP=1,1,\""
- send $env("USE_APN")
-
- if $env("USE_AUTHTYPE")="-1" goto noauth
- else goto auth
-
-:noauth
- send "\"^m"
- goto result
-
-:auth
- send "\",\""
- send $env("USE_USERID")
- send "\",\""
- send $env("USE_PASSWORD")
- send "\","
- send $env("USE_AUTHTYPE")
- send "^m"
- goto result
-
-:result
- waitfor 5 "OK","ERR","ERROR"
- if % = 0 goto connok
- if % = 1 goto connerr
- if % = 2 goto connerr
-
-:connok
- print "WWAN connection established.\r\n"
- goto done
-
-:connerr
- print "WWAN error. Connection failed.\r\n"
- exit 1
-
-:disconnect
- send "AT^^NDISDUP=1,0,\""
- send $env("USE_APN")
- send "\"^m"
-
- waitfor 5 "OK","ERR","ERROR"
- if % = 0 goto disconnok
- if % = 1 goto disconnerr
- if % = 2 goto disconnerr
-
-:disconnok
- print "WWAN connection disconnected.\r\n"
- goto done
-
-:disconnerr
- print "WWAN disconnection error.\r\n"
- exit 1
-
-:done
- exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -1,35 +0,0 @@
-. /lib/network/config.sh
-. /usr/share/libubox/jshn.sh
-
-iface_status() {
-	local iface=$1
-	local up
-	json_load "$(ifstatus $iface)"
-	json_get_var up up
-	json_close_object
-	return $up
-}
-
-case "$ACTION" in
-        add|register)
-                if [ "${INTERFACE:0:4}" == "wwan" ]; then
-                        netname=$(get_network_of "$INTERFACE")
-                        for net in $netname; do
-				local service=$(uci -q get network.$net.service)
-				local cnt=0
-				while $(iface_status $net); do
-		                        ifup $net
-					if [ "$service" == "qmi" ]; then
-						cnt=$(($cnt+1))
-						# quit trying if still not online after three times
-						[ $cnt -eq 3 ] && break
-						sleep 5
-					else
-						break
-					fi
-				done
-                        done
-                fi
-        ;;
-esac
-

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
-
-sanitize() {
-	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
-}
-
-find_usb_attrs() {
-	usb_dir="/sys/$DEVPATH"
-	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
-
-	uVid=$(cat "$usb_dir/idVendor")
-	uPid=$(cat "$usb_dir/idProduct")
-	uMa=$(sanitize "$usb_dir/manufacturer")
-	uPr=$(sanitize "$usb_dir/product")
-	uSe=$(sanitize "$usb_dir/serial")
-	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
-	bConf=$(cat "$usb_dir/bConfigurationValue")
-	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
-	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
-	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
-	interface=$(cat $usb_dir/interface)
-	if [ -n "$cdcdev" ]; then
-		comdev=$cdcdev
-		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
-		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
-		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
-	else
-		comdev=$ttydev
-		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
-		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
-		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
-	fi
-	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
-	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
-	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
-}
-
-convert_to_mbim() {
-	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
-		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
-	fi
-}
-
-usbno=$(echo $DEVPATH | cut -d'/' -f5)
-usbbr=$(echo $DEVPATH | cut -d'/' -f7)
-case "$usbbr" in
-	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
-esac
-
-#devno=$(basename $DEVPATH)
-
-find_usb_attrs
-if [ "$ACTION" = add ]; then
-	convert_to_mbim "$uVid:$uPid"
-	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
-		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
-			sed -i "/$usbno:$usbbr/ d" /var/usbnets
-			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
-			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-
-		fi
-	fi
-fi
-
-if [ "$ACTION" = remove ]; then
-	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
-		sed -i "/$usbno:$usbbr/ d" /var/usbnets
-		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-	fi
-fi

4g-support/files/etc/modemdb

@@ -1,100 +0,0 @@
-1bbb:011e	qmi
-1a8d:1001	ecm
-1a8d:100c	ecm
-1a8d:100d	ecm
-16d8:6280	qmi
-16d8:6803	qmi
-16d8:6804	qmi
-16d8:7003	qmi
-16d8:700a	qmi
-2001:7d01	mbim
-2001:7d02	mbim
-2001:7d03	mbim
-12d1:14ac	qmi
-12d1:140c	qmi
-12d1:1506	qmi	Huawei		E367/392/398
-12d1:1506	ncm	Huawei		E3276
-12d1:14d2	qmi
-12d1:1c07	ncm
-12d1:1436	ecm
-12d1:14c9	qmi
-12d1:14db	ecm
-12d1:151d	mbim
-12d1:151e	qmi	Huawei		E353
-12d1:1c1e	ncm
-12d1:150c	qmi
-12d1:150f	qmi
-12d1:151b	qmi
-12d1:142d	ecm
-12d1:1432	ecm
-12d1:1c1f	ncm
-12d1:1433	qmi
-12d1:1465	ecm
-12d1:14ca	qmi
-12d1:14cf	ncm
-12d1:14bc	ecm
-12d1:14ae	ecm
-12d1:1576	mbim
-12d1:1577	mbim
-12d1:1400	mbim
-12d1:14f7	mbim
-12d1:1464	qmi
-12d1:14cb	qmi
-12d1:14cc	qmi
-12d1:14c6	qmi
-12d1:14fa	mbim
-12d1:1578	mbim
-12d1:14c8	qmi
-12d1:14f8	mbim
-12d1:1575	mbim
-12d1:1579	mbim
-12d1:157a	mbim
-12d1:157b	mbim
-12d1:157f	mbim
-12d1:1f16	mbim	Vodafone	K5150
-12d1:1404	qmi
-19f2:1700	ecm	
-1410:b001	qmi
-1527:1000	ecm
-0b3c:c005	qmi
-0f3d:68a2	qmi
-1199:68a2	qmi	SierraWireless	M7710
-1199:68c0	qmi	SierraWireless	M7304
-1349:1100	qmi
-1349:1200	qmi	
-1199:683c	qmi
-2360:2100	qmi
-2360:2200	qmi
-2360:2300	qmi
-2507:0000	qmi	
-19d2:0055	qmi
-19d2:0052	qmi
-19d2:0063	qmi
-19d2:1008	qmi
-19d2:1010	qmi
-19d2:2002	qmi
-19d2:1176	qmi
-19d2:1023	mbim
-19d2:0104	qmi
-19d2:1018	qmi
-19d2:1032	mbim
-19d2:1402	qmi
-19d2:1405	ecm
-19d2:1426	qmi
-19d2:0031	qmi
-19d2:0124	qmi
-19d2:1254	qmi
-19d2:0017	qmi
-19d2:0002	qmi
-19d2:0121	qmi
-19d2:1252	qmi
-19d2:0157	qmi
-19d2:0167	qmi
-19d2:0199	qmi
-19d2:0257	qmi
-19d2:0326	qmi
-19d2:0349	ecm
-19d2:1408	ecm
-19d2:0284	qmi
-19d2:0019	qmi
-19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -1,159 +0,0 @@
-#!/bin/sh
-INCLUDE_ONLY=1
-
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
-
-proto_4g_init_config() {
-	proto_config_add_string "modem"
-	proto_config_add_string "service"
-	proto_config_add_string "comdev"
-	proto_config_add_string "ipaddr"
-	proto_config_add_string "netmask"
-	proto_config_add_string "hostname"
-	proto_config_add_string "clientid"
-	proto_config_add_string "vendorid"
-	proto_config_add_boolean "broadcast"
-	proto_config_add_string "reqopts"
-	proto_config_add_string "apn"
-	proto_config_add_string "username"
-	proto_config_add_string "password"
-	proto_config_add_boolean "lte_apn_use"
-	proto_config_add_string "lte_apn"
-	proto_config_add_string "lte_username"
-	proto_config_add_string "lte_password"
-	proto_config_add_string "pincode"
-	proto_config_add_string "technology"
-	proto_config_add_string "auto"
-}
-
-proto_4g_setup() {
-	local config="$1"
-	local iface="$2"
-
-        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
-        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
-
-        local opt dhcpopts
-        for opt in $reqopts; do
-                append dhcpopts "-O $opt"
-        done
-
-        for opt in $sendopts; do
-                append dhcpopts "-x $opt"
-        done
-
-        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
-        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
-        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
-        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
-        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
-        [ -n "$zone" ] && proto_export "ZONE=$zone"
-        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
-
-        json_get_var comdev comdev
-        json_get_var apn apn
-        json_get_var service service
-        json_get_var pincode pincode
-
-
-#	if [ -n "$modem" ]; then
-#		service=$(echo $modem | cut -d':' -f1)
-#		comdev=$(echo $modem | cut -d':' -f2)
-#		iface=$(echo $modem | cut -d':' -f3)
-#	fi
-	
-	case "$service" in
-		ecm)
-		;;
-		eem)
-		;;
-		mbim)
-			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$mbimdev}"
-			[ -n "$pincode" ] && {
-				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
-					set -o pipefail
-					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
-						mbimcli -d $comdev --query-pin-state
-						proto_notify_error "$config" PIN_FAILED
-						proto_block_restart "$interface"
-						return 1
-					fi
-				fi
-			}
-			APN="$apn" mbim-network $comdev start
-		;;
-		ncm)
-			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
-			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
-		;;
-		qmi)
-			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$qmidev}"
-			[ -n "$pincode" ] && {
-				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
-					set -o pipefail
-					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
-						qmicli -d $comdev --dms-uim-get-pin-status
-						proto_notify_error "$config" PIN_FAILED
-						proto_block_restart "$interface"
-						return 1
-					fi
-				fi
-			}
-			APN="$apn" qmi-network $comdev start
-		;;		
-	esac
-	
-	proto_export "INTERFACE=$config"
-	proto_run_command "$config" udhcpc -R \
-		-p /var/run/udhcpc-$iface.pid \
-		-s /lib/netifd/dhcp.script \
-		-f -t 0 -i "$iface" \
-		${ipaddr:+-r $ipaddr} \
-		${hostname:+-H $hostname} \
-		${vendorid:+-V $vendorid} \
-		$clientid $broadcast $dhcpopts
-}
-
-proto_4g_teardown() {
-	local interface="$1"
-	local iface="$2"
-	local modem service comdev
-
-        config_load network
-        config_get service $interface service
-        config_get comdev $interface comdev
-
-#	config_get modem $interface modem
-#	if [ -n "$modem" ]; then
-#		service=$(echo $modem | cut -d':' -f1)
-#		comdev=$(echo $modem | cut -d':' -f2)
-#		iface=$(echo $modem | cut -d':' -f3)
-#	fi
-	
-	case "$service" in
-		ecm)
-		;;
-		eem)
-		;;
-		mbim)
-			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$mbimdev}"
-			mbim-network $comdev stop
-		;;
-		ncm)
-			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
-		;;
-		qmi)
-			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$qmidev}"
-			qmi-network $comdev stop
-		;;		
-	esac
-	proto_kill_command "$interface"
-}
-
-add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -1,773 +0,0 @@
-#
-# Copyright (C) 2008-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=asterisk18-mod
-PKG_VERSION:=1.8.10.1
-
-PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
-
-PKG_RELEASE:=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
--include $(INCLUDE_DIR)/ltqtapi.mk
-include $(INCLUDE_DIR)/package.mk
-
-define Package/asterisk18-mod/Default
-  SUBMENU:=Telephony
-  SECTION:=net
-  CATEGORY:=Network
-  URL:=http://www.asterisk.org/
-endef
-
-define Package/asterisk18-mod/Default/description
- Asterisk is a complete PBX in software. It provides all of the features
- you would expect from a PBX and more. Asterisk does voice over IP in three
- protocols, and can interoperate with almost all standards-based telephony
- equipment using relatively inexpensive hardware.
-endef
-
-
-define Package/asterisk18-mod
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Complete open source PBX, v1.8x
-  MENU:=1
-  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
-endef
-
-define Package/asterisk18-mod/description
-$(call Package/asterisk18-mod/Default/description)
-endef
-
-define Package/asterisk18-mod-sounds
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Sound files
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-sounds/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains sound files for Asterisk.
-endef
-
-define Package/asterisk18-mod-voicemail
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Voicemail support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-voicemail/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains voicemail related modules for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-transfer
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Call transfer support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-transfer/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains the call transfer support module for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-softhangup
-$(call Package/asterisk18-mod/Default)
-  TITLE:=SoftHangup application
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-softhangup/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains the SoftHangup support module for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-meetme
-$(call Package/asterisk18-mod/Default)
-  TITLE:=conferencing support
-  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
-endef
-
-define Package/asterisk18-mod-app-meetme/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the MeetMe application driver Conferencing support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-iax2
-$(call Package/asterisk18-mod/Default)
-  TITLE:=IAX support
-  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
-endef
-
-define Package/asterisk18-mod-chan-iax2/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides IAX support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-cdr
-$(call Package/asterisk18-mod/Default)
-  TITLE:=CDR support
-  DEPENDS:= asterisk18-mod +libsqlite3
-endef
-
-define Package/asterisk18-mod-cdr/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Call Detail Record support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-musiconhold
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MOH support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-musiconhold/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Music On Hold support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-voice
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Voice client/pbx support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-voice/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Voice Client/pbx support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-srtp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=SRTP support
-  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
-endef
-
-define Package/asterisk18-mod-res-srtp/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides SRTP support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-stun
-$(call Package/asterisk18-mod/Default)
-  TITLE:=STUN support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-queue
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Queue support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-gtalk
-$(call Package/asterisk18-mod/Default)
-  TITLE:=GTalk support
-  DEPENDS:= asterisk18-mod +libiksemel
-endef
-
-define Package/asterisk18-mod-chan-gtalk/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_gtalk and res_jabber for GTalk
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-res-timing-timerfd
-$(call Package/asterisk18-mod/Default)
-  TITLE:= Timerfd Timing Interface
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-timing-pthread
-$(call Package/asterisk18-mod/Default)
-  TITLE:= pthread Timing Interface
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-fax
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Generic FAX Resource for FAX technology resource modules
-  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
-endef
-
-define Package/asterisk18-mod-res-fax-spandsp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Spandsp T.38 and G.711 FAX Resource
-  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
-endef
-
-define Package/asterisk18-mod-chan-mgcp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MGCP channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-mgcp/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_mgcp support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-skinny
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Skinny channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-skinny/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_skinny support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-brcm
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Broadcom channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-brcm/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_brcm support to Asterisk.
-endef
-
-define Package/asterisk18-mod-curl
-$(call Package/asterisk18-mod/Default)
-  TITLE:=CURL support
-  DEPENDS:= asterisk18-mod +libcurl
-endef
-
-define Package/asterisk18-mod-curl/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides CURL
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-mysql
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MySQL support
-  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
-endef
-
-define Package/asterisk18-mod-mysql/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides MySQL
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-lantiq
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Lantiq TAPI support
-  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
-  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
-  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
-endef
-
-define Package/asterisk18-mod-chan-lantiq/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_lantiq support to Asterisk.
-endef
-
-CONFIGURE_ARGS+= \
-	--without-inotify
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
-  CONFIGURE_ARGS+= \
-	--with-dahdi="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-dahdi
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
-  CONFIGURE_ARGS+= \
-	--with-gnutls="$(STAGING_DIR)/usr" \
-	--with-iksemel="$(STAGING_DIR)/usr"
-  SITE_VARS+= \
-	ac_cv_lib_iksemel_iks_start_sasl=yes \
-	ac_cv_lib_gnutls_gnutls_bye=yes
-else
-  CONFIGURE_ARGS+= \
-	--without-gnutls \
-	--without-iksemel
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
-  CONFIGURE_ARGS+= \
-	--with-curl="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-curl
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
-  CONFIGURE_ARGS+= \
-	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
-else
-  CONFIGURE_ARGS+= \
-	--without-mysqlclient
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
-  CONFIGURE_ARGS+= \
-    --with-spandsp="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-    --without-spandsp
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
-  CONFIGURE_ARGS+= \
-	--with-srtp="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-srtp
-endif
-
-ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
-  EXTRA_CFLAGS += -DNTR_SUPPORT
-endif
-
-CONFIGURE_ARGS+= \
-	--without-curses \
-	--with-gsm=internal \
-	--without-cap \
-	--without-gtk \
-	--without-gtk2 \
-	--without-isdnnet \
-	--without-kde \
-	--without-misdn \
-	--without-nbs \
-	--with-ncurses="$(STAGING_DIR)/usr" \
-	--without-netsnmp \
-	--without-newt \
-	--without-odbc \
-	--without-ogg \
-	--without-osptk \
-	--with-popt="$(STAGING_DIR)/usr" \
-	--without-pri \
-	--without-qt \
-	--without-radius \
-	--without-sdl \
-	--without-suppserv \
-	--without-tds \
-	--without-termcap \
-	--without-tinfo \
-	--without-vorbis \
-	--without-vpb \
-	--with-z="$(STAGING_DIR)/usr" \
-	--with-sounds-cache="$(DL_DIR)" \
-	--disable-xmldoc
-
-# I've had strange errors with -fno-caller-saves
-# in global CFLAGS so revert it. /Ronny
-EXTRA_CFLAGS+= -O2 -fcaller-saves
-EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
-EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
-
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-ifneq ($(CONFIG_TARGET_lantiq),)
-	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
-endif
-endef
-
-define Build/Configure
-	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
-	$(call Build/Configure/Default,,$(SITE_VARS))
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(PKG_BUILD_DIR)" \
-		include/asterisk/version.h \
-		include/asterisk/buildopts.h defaults.h \
-		makeopts.embed_rules
-	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
-	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
-	$(MAKE) -C "$(PKG_BUILD_DIR)" \
-		ASTVARLIBDIR="/usr/lib/asterisk" \
-		ASTDATADIR="/usr/lib/asterisk" \
-		ASTKEYDIR="/usr/lib/asterisk" \
-		ASTDBDIR="/usr/lib/asterisk" \
-		NOISY_BUILD="1" \
-		DEBUG="" \
-		OPTIMIZE="" \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		all install samples
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
-endef
-
-define Package/asterisk18-mod/conffiles
-/etc/asterisk/asterisk.conf
-/etc/asterisk/modules.conf
-/etc/asterisk/extensions.conf
-/etc/asterisk/sip.conf
-/etc/asterisk/sip_notify.conf
-/etc/asterisk/features.conf
-/etc/asterisk/indications.conf
-/etc/asterisk/logger.conf
-/etc/asterisk/manager.conf
-/etc/asterisk/rtp.conf
-/etc/default/asterisk
-/etc/init.d/asterisk
-endef
-
-define Package/asterisk18-mod/install
-	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
-	for f in asterisk extensions features \
-		indications logger manager modules \
-		sip sip_notify rtp; do \
-		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
-	done
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	for f in app_dial app_echo app_playback app_macro \
-		chan_sip res_rtp_asterisk res_rtp_multicast \
-		codec_ulaw codec_gsm \
-		format_gsm format_pcm format_wav format_wav_gsm \
-		pbx_config \
-		func_strings func_timeout func_callerid func_logic; do \
-		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
-	done
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/default
-	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
-endef
-
-define Package/asterisk18-mod-sounds/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
-	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
-	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
-endef
-
-
-define Package/asterisk18-mod-voicemail/conffiles
-/etc/asterisk/voicemail.conf
-endef
-
-define Package/asterisk18-mod-voicemail/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
-endef
-
-define Package/asterisk18-mod-app-meetme/conffiles
-/etc/asterisk/meetme.conf
-endef
-
-define Package/asterisk18-mod-app-meetme/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
-endef
-
-define Package/asterisk18-mod-chan-iax2/conffiles
-/etc/asterisk/iax.conf
-/etc/asterisk/iaxprov.conf
-endef
-
-define Package/asterisk18-mod-cdr/conffiles
-/etc/asterisk/cdr.conf
-/etc/asterisk/cdr_custom.conf
-/etc/asterisk/cdr_manager.conf
-/etc/asterisk/cdr_odbc.conf
-/etc/asterisk/cdr_pgsql.conf
-/etc/asterisk/cdr_tds.conf
-endef
-
-define Package/asterisk18-mod-res-musiconhold/conffiles
-/etc/asterisk/musiconhold.conf
-endef
-
-define Package/asterisk18-mod-chan-iax2/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-cdr/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-musiconhold/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-voice/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-gtalk/conffiles
-/etc/asterisk/gtalk.conf
-/etc/asterisk/jabber.conf
-endef
-
-define Package/asterisk18-mod-chan-gtalk/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-timing-timerfd/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-timing-pthread/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-fax/conffiles
-/etc/asterisk/res_fax.conf
-endef
-
-define Package/asterisk18-mod-res-fax/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-fax-spandsp/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-mgcp/conffiles
-/etc/asterisk/mgcp.conf
-endef
-
-define Package/asterisk18-mod-chan-mgcp/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-skinny/conffiles
-/etc/asterisk/skinny.conf
-endef
-
-define Package/asterisk18-mod-chan-skinny/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-brcm/conffiles
-/etc/asterisk/brcm.conf
-endef
-
-define Package/asterisk18-mod-chan-brcm/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-curl/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-transfer/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-softhangup/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-mysql/conffiles
-/etc/asterisk/app_mysql.conf
-/etc/asterisk/res_config_mysql.conf
-/etc/asterisk/cdr_mysql.conf
-endef
-
-define Package/asterisk18-mod-mysql/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-lantiq/conffiles
-/etc/asterisk/lantiq.conf
-endef
-
-define Package/asterisk18-mod-chan-lantiq/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-srtp/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-stun/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-queue/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Buildasterisk18-modModuleTemplate
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))
-  $$(call Package/asterisk18-mod/Default)
-    TITLE:=$(2) support
-    DEPENDS:= asterisk18-mod $(4)
-  endef
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))/description
-  $$(call Package/asterisk18-mod/Default/description)
-    This package provides support $(3) in Asterisk.
-  endef
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))/install
-	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
-  endef
-
-  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
-endef
-
-$(eval $(call BuildPackage,asterisk18-mod))
-$(eval $(call BuildPackage,asterisk18-mod-voicemail))
-$(eval $(call BuildPackage,asterisk18-mod-sounds))
-$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
-$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
-$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
-$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
-$(eval $(call BuildPackage,asterisk18-mod-cdr))
-$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
-$(eval $(call BuildPackage,asterisk18-mod-res-voice))
-$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
-$(eval $(call BuildPackage,asterisk18-mod-res-fax))
-$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
-$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
-$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
-$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
-$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
-$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
-$(eval $(call BuildPackage,asterisk18-mod-curl))
-$(eval $(call BuildPackage,asterisk18-mod-mysql))
-$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
-$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
-$(eval $(call BuildPackage,asterisk18-mod-res-stun))
-$(eval $(call BuildPackage,asterisk18-mod-app-queue))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
-$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
-$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
-$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -1,4 +0,0 @@
-## startup options for /etc/init.d/asterisk
-
-ENABLE_ASTERISK="yes"
-OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ "$INTERFACE" == "$bindintf" ] || exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
-	bindaddr="${bindaddr:-0.0.0.0}"
-	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
-fi
-

asterisk-1.8.x-mod/files/asterisk.init

@@ -1,56 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=10
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions/network.sh
-USE_PROCD=1
-NAME=asterisk
-PROG=/usr/sbin/asterisk
-DEFAULT=/etc/default/asterisk
-CONFDIR=/etc/asterisk
-
-init_asterisk() {
-	[ -f $DEFAULT ] && . $DEFAULT
-	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
-	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
-        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
-
-        # does the board have a fxs relay?
-        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
-        if [ "$fxsRelayGpio" != "" ]; then
-                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
-        fi
-}
-
-service_triggers() {
-        procd_add_reload_trigger voice_client
-}
-
-start_service() {
-	init_asterisk
-
-	procd_open_instance
-	procd_set_param command "$PROG" -f
-	procd_set_param respawn
-	procd_close_instance
-#	service_start /usr/sbin/asterisk
-}
-
-reload_service() {
-	asterisk -rx "config reload $CONFDIR/sip.conf"
-	sleep 1
-	asterisk -rx "core reload"
-	asterisk -rx "dialplan reload"
-	asterisk -rx "brcm reload"
-}
-
-restart() {
-	reload
-}
-
-stop_service() {
-        service_stop /usr/sbin/asterisk
-}
-

ated/Makefile

@@ -1,8 +1,15 @@
 #
-# Copyright (C) 2016 inteno
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
 #
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
 #
 
 include $(TOPDIR)/rules.mk
@@ -14,12 +21,15 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

bashdb/Makefile

@@ -13,6 +13,9 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -0,0 +1,27 @@
+if PACKAGE_libbbfdm
+
+config LIBBBFDM_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
+
+config BBF_TR181
+	bool "Compile with tr181 device features"
+	default y
+
+config BBF_TR104
+	bool "Compile with tr104 voice features"
+	default y
+
+config BBF_TR143
+	bool "Compile with tr143 diagnostics features"
+	default y
+
+config BBF_TR157
+	bool "Compile with tr157 bulkdata collector features"
+	default y
+	
+config BBF_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

bbf/Makefile

@@ -0,0 +1,89 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=1.0-2019-12-10
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=0ea0b2c89a51ad56ca76d171b7fd5dcf38e102cd
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libbbfdm
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbfdm/description
+ Test description will update later.
+endef
+
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CONFIGURE_ARGS += \
+	--enable-tr104
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_BBF_TR157),y)
+CONFIGURE_ARGS += \
+	--enable-tr157
+endif
+
+ifeq ($(CONFIG_BBF_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-tr064
+endif
+
+define Package/libbbfdm/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/dmtree/tr157/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libbbfdm))

bbk_cli/Makefile

@@ -0,0 +1,42 @@
+#
+# Copright (C) 2018 The Internet Foundation In Sweden
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bbk_cli
+PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bbk_cli
+	CATEGORY:=Utilities
+	DEPENDS:=+libpthread +libstdcpp
+	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
+endef
+
+define Package/bbk_cli/description
+	To measure connection speed in an environment that is missing a web browser, 
+	for example, in a server, you can use our command line interface bbk_cli, 
+	which is available for some of the most common operating systems.
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
+endef
+
+define Package/bbk_cli/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
+endef
+
+$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -0,0 +1,25 @@
+diff --git a/src/framework/engine.h b/src/framework/engine.h
+index 57a48ad..9e1bc36 100644
+--- a/src/framework/engine.h
++++ b/src/framework/engine.h
+@@ -10,6 +10,7 @@
+ #include <map>
+ #include <vector>
+ #include <string>
++#include <sys/select.h>
+ 
+ #include "logger.h"
+ 
+diff --git a/src/framework/mk.inc b/src/framework/mk.inc
+index 793e211..13275be 100644
+--- a/src/framework/mk.inc
++++ b/src/framework/mk.inc
+@@ -7,7 +7,7 @@ OS:=$(shell uname)
+ CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
+ 
+ ifeq ($(OS),Linux)
+-CXX = g++
++CXX = $(CROSS_COMPILE)g++
+ endif
+ 
+ ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,6 +18,9 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

catv/Makefile

@@ -1,9 +1,19 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

crashlog/Makefile

@@ -1,9 +1,18 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

dectmngr/Makefile

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=1.0.23
-PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
-PKG_NAME:=dectmngr
-
-
-LDFLAGS+= \
-        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dectmngr
-  CATEGORY:=Utilities
-  TITLE:=Broadcom endpoint test application
-  URL:=
-  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
-endef
-
-define Package/dectmngr/description
-	Dect proxy, manager and tools
-endef
-
-
-define Package/dectmngr/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-
-	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
-	cp files/etc/init.d/* $(1)/etc/init.d/
-	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
-	cp files/etc/dect/* $(1)/etc/dect/
-	cp files/etc/config/* $(1)/etc/config/
-	cp files/sbin/dectreg $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -1,3 +0,0 @@
-config dect 'dect'
-	option 'radio' 'auto'
-

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-if [ "$ACTION" == "led_blink" ]; then
-    ubus call led.dect set '{"state":"notice"}'
-fi
-
-if [ "$ACTION" == "led_on" ]; then
-    ubus call led.dect set '{"state":"ok"}'
-fi
-
-if [ "$ACTION" == "led_off" ]; then
-    ubus call led.dect set '{"state":"off"}'
-fi
-
-

dectmngr/files/etc/init.d/dect

@@ -1,60 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=97
-STOP=10
-USE_PROCD=1
-
-DEST=
-DEFAULT=
-OPTIONS=""
-
-
-start_service() {
-	# avoid fp timing problem
-	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
-	
-	# setup board specific dect parameters
-	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
-	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
-	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
-	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
-	case "$DECTANTDIV" in
-		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
-		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
-		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
-	esac
-
-	if [ ! -f /etc/dect/nvs ]; then
-		cp /etc/dect/nvs_default /etc/dect/nvs
-		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
-		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
-		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
-		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
-		fsync /etc/dect/nvs
-	fi
-	
-	# init dectproxy
-	dectproxy > /dev/null 2>&1 &
-	dectmngr > /tmp/dectmngr 2>&1 &
-}
-
-stop_service() {
-        killall -9 dectproxy
-	killall -9 dectmngr
-}
-
-restart_service() {
-	echo "restarting dect"
-	killall dectmngr
-	dectmngr > /tmp/dectmngr 2>&1 &
-}
-
-reload_service() {
-	# reload config
-	dect -c
-}
-
-service_triggers() {
-        procd_add_reload_trigger dect
-}
-

dectmngr/files/sbin/dectreg

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# This script is likely not used. Just exit with
-# an error and see if someone screems... If not,
-# we can delete this file.
-exit 1
-
-
-[ -f /var/dectisregistering ] || {
-	touch /var/dectisregistering 2>/dev/null
-	/usr/bin/dectmngr -r
-	ubus call led.dect  set '{"state" : "notice"}'
-	sleep 20
-	rm /var/dectisregistering 2>/dev/null
-	/usr/bin/dectmngr -s
-	ubus call led.dect  set '{"state" : "ok"}'
-}

dectmngr2/Makefile

@@ -1,19 +1,20 @@
 #
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2019 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.0
-PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
+PKG_VERSION:=1.3.0
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
+PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
 PKG_NAME:=dectmngr2
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
 export BUILD_DIR
@@ -21,6 +22,7 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -28,7 +30,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) +libubox +ubus +libpicoevent endptmngr
 endef
 
 define Package/dectmngr2/description
@@ -41,6 +43,7 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -48,6 +51,7 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+
+# Workaround for product DG400 which has an
+# incorrect value in nvram from factory.
+
+if [ -e "/proc/nvram/BoardId" ]; then
+	boardid=$(cat /proc/nvram/BoardId)
+	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
+
+	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
+		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
+
+		db -q batch <<-EOT
+			set hw.board.hasDect=1
+			commit hw.board
+		EOT
+	fi
+fi
+
+
+exit 0
+

dslmngr/Makefile

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dslmngr
+PKG_VERSION:=1.0.0
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+define Package/dslmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=XDSL status and configration utility
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
+endef
+
+define Package/dslmngr/description
+ This package can be used to configure and provide status about
+ the XDSL subsystem through UBUS.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/Compile
+	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
+endef
+
+define Package/dslmngr/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,10 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+	uci del_list firewall.easyqos._access_w="root"
+	uci add_list firewall.easyqos._access_w="root"
+        commit firewall
+EOT

easy-soc-libs.deprecated/Config.in

@@ -0,0 +1,10 @@
+if (PACKAGE_libwifix)
+menu "configurations"
+
+config LIBWIFIX_DEBUG
+	depends on PACKAGE_libwifix
+	bool "Enable wifi debugging"
+	default n
+
+endmenu
+endif

easy-soc-libs.deprecated/Makefile

@@ -0,0 +1,108 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs.deprecated
+PKG_VERSION:=1.0.1
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=cec7ae3a5c8348ea2d81a2abac0599a098752e3a
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs.deprecated
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS easy SoC libraries (deprecated)
+  SUBMENU:=IOPSYS easy SoC libraries (deprecated)
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+define Package/libwifix/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libwifix
+  $(call Package/easy-soc-libs.deprecated)
+  TITLE:= WiFi library for wifix (deprecated)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+  TARGET_CFLAGS +=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+ifdef CONFIG_LIBWIFIX_DEBUG
+  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
+endif
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libwifix),libwifix)
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+define Build/InstallDev/libwifix
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifix/wifi.h $(1)/usr/include/wifix.h
+	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Build/Compile
+	$(call Build/Compile/Default)
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/libwifix/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libwifix))

easy-soc-libs/Config.in

@@ -0,0 +1,23 @@
+if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
+menu "configurations"
+
+config IOP_LLA_LIBS_DEBUG
+	bool "Enable debugging support"
+	default n
+
+config LIBWIFI_DEBUG
+	depends on PACKAGE_libwifi
+	bool "Enable wifi debugging"
+	default n
+
+config LIBDSL_DEBUG
+	depends on PACKAGE_libdsl
+	bool "Enable xdsl debugging"
+	default n
+
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
+endmenu
+endif

easy-soc-libs/Makefile

@@ -0,0 +1,184 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=2.4.1
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=0accbd7266b2742ad8921edd5dab974fc384a49a
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS easy SoC libraries
+  SUBMENU:=IOPSYS easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+define Package/libwifi/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Helper and utility functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+TARGET_iopsys_ramips:swconfig
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+  TARGET_CFLAGS +=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+ifdef CONFIG_IOP_LLA_LIBS_DEBUG
+  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
+endif
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
+endef
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy)
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Build/Compile
+	$(call Build/Compile/Default)
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef
+
+$(eval $(call BuildPackage,libwifi))
+$(eval $(call BuildPackage,libdsl))
+$(eval $(call BuildPackage,libethernet))
+$(eval $(call BuildPackage,libeasy))

endptcfg/Makefile

@@ -1,92 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=endptcfg
-PKG_VERSION:=0.2
-
-PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptcfg-open
-else
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
-PKG_SOURCE_PROTO:=git
-endif
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-LDFLAGS+= \
-		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
-
-BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-export BCMKERNEL_DIR
-
-TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
-			-lpthread
-
-TARGET_CFLAGS += -DFAKE_SSP
-
-RSTRIP:=true
-export BUILD_DIR
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptcfg
-  CATEGORY:=Utilities
-  TITLE:=Broadcom endpoint driver configuration application
-  URL:=
-  DEPENDS:=+libpthread bcmkernel
-endef
-
-define Package/endptcfg/description
-	Broadcom endpoint driver configuration application
-endef
-
-define Package/endptcfg/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq ($(CONFIG_ENDPT_OPEN),y)
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
-			-I$(LINUX_DIR)/include \
-			-I$(STAGING_DIR)/usr/include \
-			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
-			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
-endef
-else
-define Build/Compile
-endef
-endif
-
-define Package/endptcfg/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,endptcfg))

endptmngr/Makefile

@@ -0,0 +1,68 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.2
+PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_NAME:=endptmngr-open
+PATCH_DIR:=
+else
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_NAME:=endptmngr
+endif
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Brcmslic
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen @(PACKAGE_bcmkernel||PACKAGE_bcmopen) @TARGET_HAS_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
+endef
+
+endif
+
+
+define Package/endptmngr/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

eventlog/Makefile

@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))

fatrace/Makefile

@@ -0,0 +1,61 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v3.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=fatrace
+PKG_VERSION:=0.12
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-3.0
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fatrace
+	CATEGORY:=Utilities
+	TITLE:=Report system wide file access events
+	URL:=
+	DEPENDS	:= +@KERNEL_FANOTIFY
+endef
+
+define Package/fatrace/description
+	Report system wide file access events.
+endef
+
+MAKE_INSTALL_FLAGS += PREFIX="/" 
+
+define Package/fatrace/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
+#	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,fatrace))
+
+

fatrace/patches/001-fix-O_LARGEFILE.patch

@@ -0,0 +1,14 @@
+diff --git a/fatrace.c b/fatrace.c
+index 1c0899a..b7d1560 100644
+--- a/fatrace.c
++++ b/fatrace.c
+@@ -44,7 +44,8 @@
+  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
+  * O_LARGEFILE is usually 0, so hardcode it here
+  */
+-#define KERNEL_O_LARGEFILE 00100000
++//#define KERNEL_O_LARGEFILE 00100000
++#define KERNEL_O_LARGEFILE O_LARGEFILE
+ 
+ /* command line options */
+ static char* option_output = NULL;

fatrace/patches/002-fflush.patch

@@ -0,0 +1,12 @@
+diff --git a/fatrace.c b/fatrace.c
+index b7d1560..6179272 100644
+--- a/fatrace.c
++++ b/fatrace.c
+@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
+         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
+     }
+     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
++    fflush(stdout);
+ }
+ 
+ /**

fping/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fping
+PKG_VERSION:=4.0
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fping.org/dist/
+PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
+
+PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fping
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
+  URL:=http://fping.org/
+endef
+
+
+define Package/fping/description
+	fping is a ping like program which uses the Internet Control Message Protocol
+	(ICMP) echo request to determine if a target host is responding.  fping
+	differs from ping in that you can specify any number of targets on the command
+	line, or specify a file containing the lists of targets to ping.  Instead of
+	sending to one target until it times out or replies, fping will send out a
+	ping packet and move on to the next target in a round-robin fashion.
+endef
+
+CONFIGURE_ARGS+= \
+	--enable-ipv4 \
+	--enable-ipv6
+
+TARGET_CFLAGS += -std=gnu99
+
+define Package/fping/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -1,3 +0,0 @@
-
-git-src
-

gigaset-elements/Makefile

@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-

gryphon-led-module/Makefile

@@ -0,0 +1,62 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gryphon-led-kernel-module
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/$(PKG_NAME)
+  SUBMENU:=LED modules
+  TITLE:=LED driver for Gryphon
+  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
+  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  PKG_LICENSE:=GPLv2
+  PKG_LICENSE_URL:=
+endef
+
+define KernelPackage/$(PKG_NAME)/description
+  This package contains the LED driver for Gryphon devices.
+endef
+
+EXTRA_KCONFIG:= CONFIG_RGB_LED=m
+
+MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) src/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
+		modules
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+endef
+
+$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -0,0 +1,26 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+MODULE_NAME  = gryphon-led-kernel-module
+
+obj-m  := $(MODULE_NAME).o
+
+GENEXIS_FILES= \
+	main.o \
+	sk9822.o \
+	sk9822_bitbang.o
+
+$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+#include "sk9822.h"
+
+#define DRIVER_NAME			"canyon_led"
+#define DRIVER_AUTHOR		"Genexis B.V."
+#define DRIVER_DESC			"Canyon LED driver for SK9822"
+#define DRIVER_VERSION	"1"
+
+/**
+ * sysfs interfaces
+ */
+
+static ssize_t get_led_color(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	/* [ln] todo: dummy implementation */
+	int len;
+
+	len = sprintf(buf, "%d\n", 123);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set complete LED strip to a specific color
+ * @retval count number of bytes written
+ * @retval -EMSGSIZE if the message is too big
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_color(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	size_t buflen = count;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	/* strip newline */
+	if ((count > 0) && (buf[count-1] == '\n')) {
+		buflen--;
+	}
+
+	if (buflen != 6) { // RRGGBB\0
+		return -EMSGSIZE;
+	}
+
+	// Update the LED array here
+	ret = sk9822_set_color_str(sk9822, buf);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set led color\n");
+		return -EIO;
+	}
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
+
+static struct attribute *sk9822_dev_attrs[] = {
+	 &dev_attr_led_color.attr,
+	 NULL
+};
+
+static struct attribute_group sk9822_dev_attr_group = {
+	.name = "sk9822",
+	.attrs = sk9822_dev_attrs,
+};
+
+/**
+ * device prope and removal
+ */
+
+static int canyon_led_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sk9822_leds *leds;
+
+	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds) {
+		return -ENOMEM;
+	}
+	leds->dev = &pdev->dev;
+	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
+
+	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Could not read led-count property\n");
+		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	}
+
+	leds->led_colors = devm_kzalloc(&pdev->dev,
+			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
+	if (!leds->led_colors) {
+		return -ENOMEM;
+	}
+
+
+	platform_set_drvdata(pdev, leds);
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->clock_gpio, 1);
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	} else {
+		printk(KERN_INFO "Got clock gpio\n");
+		gpiod_set_value(leds->clock_gpio, 0);
+	}
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->data_gpio, 1);
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	} else {
+		printk(KERN_INFO "Got data gpio\n");
+		gpiod_set_value(leds->data_gpio, 0);
+	}
+
+	printk(KERN_INFO "Attempt to set filefs stuff\n");
+	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+
+#if 0
+	printk(KERN_INFO "Flash LEDs to verify they work\n");
+	sk9822_set_color_str(leds, "00FF00");
+	sk9822_update(leds);
+	msleep(200);
+	sk9822_set_color_str(leds, "000000");
+	sk9822_update(leds);
+#endif
+
+	printk(KERN_INFO "canyon led successfully probed\n");
+
+	return 0;
+}
+
+static int canyon_led_remove(struct platform_device *pdev)
+{
+	struct sk9822_leds *leds;
+
+	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+
+	leds = platform_get_drvdata(pdev);
+	if (IS_ERR(leds)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -1;
+	}
+
+	if (leds->clock_gpio) {
+		gpiod_put(leds->clock_gpio);
+	}
+
+	if (leds->data_gpio) {
+		gpiod_put(leds->data_gpio);
+	}
+
+	printk(KERN_NOTICE "Bye, bye\n");
+
+	return 0;
+}
+
+/**
+ * platform driver metadata
+ */
+
+static const struct of_device_id canyon_led_of_ids[] = {
+	{ .compatible = "canyon,led" },
+	{ }
+};
+
+static struct platform_driver canyon_led = {
+	.probe = &canyon_led_probe,
+	.remove = &canyon_led_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = canyon_led_of_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
+module_platform_driver(canyon_led);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+#include "sk9822_bitbang.h"
+
+cRGB __hexs_to_rgb(const char *hex)
+{
+	cRGB rgb;
+	int r, g, b;
+
+	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
+	// This needs sanity checking
+	rgb.r = r;
+	rgb.g = g;
+	rgb.b = b;
+	return rgb;
+}
+
+/**
+ * @brief update the color over the given device struct to the provided HEX color
+ */
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
+{
+	int i;
+	cRGB color = __hexs_to_rgb(hex);
+
+	for (i = 0; i < sk9822->led_count; i++) {
+		sk9822->led_colors[i] = color;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief write device struct to the device
+ */
+int sk9822_update(struct sk9822_leds *sk9822)
+{
+	uint16_t i;
+	uint16_t led_count = sk9822->led_count;
+
+	// Start Frame
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+
+	for (i = 0; i < led_count; i++) {
+		cRGB *p = &sk9822->led_colors[i];
+		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
+		sk9822_bb_write(sk9822, p->b);
+		sk9822_bb_write(sk9822, p->g);
+		sk9822_bb_write(sk9822, p->r);
+	}
+
+	// End frame
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+
+	return 0;
+}

gryphon-led-module/src/sk9822.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef SK9822_H_
+#define SK9822_H_
+
+#include <linux/types.h>
+
+#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
+#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+
+typedef struct {
+	uint8_t b;
+	uint8_t g;
+	uint8_t r;
+} cRGB;   // BGR (SK9822 Standard)
+
+struct sk9822_leds {
+	struct device *dev;
+	struct gpio_desc *clock_gpio;
+	struct gpio_desc *data_gpio;
+
+	cRGB *led_colors;
+	uint8_t led_brightness;
+	uint16_t led_count;
+};
+
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
+int sk9822_update(struct sk9822_leds *sk9822);
+
+#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+/**
+ * @brief Bitbang write operation CLOCK+DATA
+ *
+ * Assumed state before call: CLOCK- Low, DATA- High
+ */
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8 ; i++) {
+		if (!(c&0x80)) {
+			gpiod_set_value(sk9822->data_gpio, 0); // set data low
+		} else {
+			gpiod_set_value(sk9822->data_gpio, 1); // set data high
+		}
+
+		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
+		c <<= 1;
+		udelay(1); // stretch clock
+		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
+	}
+
+	// State after call: SCK Low, Data high
+}

gryphon-led-module/src/sk9822_bitbang.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _SK9822_BB_H_
+#define _SK9822_BB_H_
+
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
+
+#endif /* _SK9822_BB_H_ */

ice-client/files/ice-client.uci_default

@@ -1,63 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	local password="$(db get hw.board.wpaKey)"
-	if [ -n "$password" ]; then
-		adduser -D -H -s /bin/false ice
-		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
-	fi
-}
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-EOF
-}
-
-exit 0
-

icgroupd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 Inteno Broadband AB
+# Copyright (C) 2019 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.

icwmp/Config_cwmp.in

@@ -15,33 +15,13 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
-choice
-	prompt "Select Data Model"
-	default tr098
-
-config DATAMODEL_TR098
-	bool "TR-098"
-
-config DATAMODEL_TR181
-	bool "TR-181"
-endchoice
-
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
-choice
-	prompt "enable xmpp feature"
-	default disable
-
-config XMPP_DISABLE
-	bool "disable"
-
-config XMPP_ENABLE
-	bool "enable"
-endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
-
+    
 endif
+

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012 OpenWrt.org
+# Copyright (C) 2019 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,15 +8,17 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-06-30
+PKG_VERSION:=4.0-2019-12-11
 PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0999d69acc7e02b8f6ffcc1c4ca4c759de0f7915
+PKG_SOURCE_VERSION:=3fdaca7e3463d46a52f31496b0f84deb6b21eaf8
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -30,11 +32,53 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
+define Package/icwmp_stun
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 stun Client
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
+endef
+
+define Package/icwmp_xmpp
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 xmpp feature
+  DEPENDS:=+libuci +libubox +libexpat +libstrophe
+endef
+
+define Package/icwmp_twamp
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 twamp feature
+  DEPENDS:=+libuci
+endef
+
+define Package/icwmp_udpechoserver
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 udpechoserver feature
+  DEPENDS:=+libuci
+endef
+
+define Package/icwmp_bulkdata
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
+endef
+
+define Package/icwmp-tr098
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=CWMP client for TR-098 Data Model
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl +libtr098
+endef
+
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm
 endef
 
 define Package/icwmp/description
@@ -56,7 +100,7 @@ define Package/icwmp-zstream
 endef
 
 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config.in"
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -69,6 +113,11 @@ endif
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
+ifeq ($(CONFIG_PACKAGE_icwmp-tr098),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_tr098
+endif
+
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -85,10 +134,7 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
-CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
-
+	
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -122,26 +168,74 @@ endif
 
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(CP) ./files/icwmp.hotplug $(1)/etc/hotplug.d/iface/90-icwmp
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
+	$(CP) ./files/* $(1)/
+endef
+
+define Package/icwmp-tr098/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
+endef
+
+define Package/icwmp_stun/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
+endef
+
+define Package/icwmp_xmpp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
+	$(CP) ./xmpp-files/* $(1)/
+endef
+
+define Package/icwmp_udpechoserver/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
+endef
+
+define Package/icwmp_twamp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
+endef
+
+define Package/icwmp_bulkdata/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
 endef
 
 define Package/icwmp-$(BUILD_VARIANT)/postinst
@@ -163,6 +257,11 @@ define Package/icwmp-$(BUILD_VARIANT)/prerm
 	exit 0
 endef
 
-
 $(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,icwmp_stun))
+$(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp_udpechoserver))
+$(eval $(call BuildPackage,icwmp_twamp))
+$(eval $(call BuildPackage,icwmp_bulkdata))
+$(eval $(call BuildPackage,icwmp-tr098))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+. /lib/functions/network.sh
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+[ -f /etc/config/cwmp ] || exit 0
+
+handle_icwmp_restart() {
+	[ -f /tmp/switching_mode ] && exit 0
+	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
+
+	[ "$INTERFACE" == "loopback" ] && exit 0
+
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0
+
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0
+
+	local ifname="$(uci -q get network.$INTERFACE.ifname)"
+	[ "${ifname:0:1}" == "@" ] && exit 0
+
+	mkdir -p /tmp/ipv4
+
+	network_flush_cache
+
+	local previpaddr=""
+	local curipaddr=""
+	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+	previpaddr=$(cat $ipaddrfile 2>/dev/null)
+	network_get_ipaddr curipaddr $INTERFACE
+	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+	local prevgateway=""
+	local curgateway=""
+	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+	prevgateway=$(cat $gatewayfile 2>/dev/null)
+	network_get_gateway curgateway $INTERFACE
+	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+	local prevsubnets=""
+	local cursubnets=""
+	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+	prevsubnets=$(cat $subnetsfile 2>/dev/null)
+	network_get_subnets cursubnets $INTERFACE
+	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+	local prevdnsservers=""
+	local curdnsservers=""
+	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
+	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
+	network_get_dnsserver curdnsservers $INTERFACE
+	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
+
+	local prevdev=""
+	local curdev=""
+	local devfile=/tmp/ipv4/$INTERFACE-dev
+	prevdev=$(cat $devfile 2>/dev/null)
+	network_get_device curdev $INTERFACE
+	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
+
+	local prevopt43url=""
+	local curopt43url=""
+	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
+	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
+	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
+	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
+
+	[ \
+		"$prevdev" == "$curdev" -a \
+		"$previpaddr" = "$curipaddr" -a \
+		"$prevgateway" = "$curgateway" -a \
+		"$prevsubnets" = "$cursubnets" -a \
+		"$prevdnsservers" = "$curdnsservers" \
+	] && {
+		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
+		[ -z "$prevopt43url" ] && exit 0
+	}
+
+	/etc/init.d/icwmpd reload &
+}
+
+handle_icwmp_restart

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -0,0 +1,54 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+set_cwmp_reqopts() {
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
+	local discovery=0
+	case $dhcp_discovery in
+		enable|1) discovery=1 ;;
+	esac
+
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
+	for ropt in $reqopts; do
+		case $ropt in
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
+		esac
+	done
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ "$proto" == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+	fi
+}
+
+regenerate_ssl_link(){
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+set_cwmp_reqopts
+regenerate_ssl_link

icwmp/files/icwmp.hotplug

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-grep -q "Designated" /etc/banner || exit 0
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-mkdir -p /tmp/ipv4
-
-local previpaddr=""
-local curipaddr=""
-local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-previpaddr=$(cat $ipaddrfile 2>/dev/null)
-network_get_ipaddr curipaddr $INTERFACE
-[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-local prevgateway=""
-local curgateway=""
-local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-prevgateway=$(cat $gatewayfile 2>/dev/null)
-network_get_gateway curgateway $INTERFACE
-[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-local prevsubnets=""
-local cursubnets=""
-local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-prevsubnets=$(cat $subnetsfile 2>/dev/null)
-network_get_subnets cursubnets $INTERFACE
-[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" ] && exit 0
-
-[ -f /etc/config/cwmp ] && /etc/init.d/icwmpd reload &
-

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+[ -f /etc/config/cwmp_xmpp ] || exit 0
+
+[ "$ACTION" == "ifup" ] || exit 0
+[ "$INTERFACE" == "loopback" ] && exit 0
+
+local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+local islan="$(uci -q get network.$INTERFACE.is_lan)"
+[ "$islan" == "1" ] && exit 0
+
+local proto="$(uci -q get network.$INTERFACE.proto)"
+[ "$proto" == "none" ] && exit 0
+
+local ifname="$(uci -q get network.$INTERFACE.ifname)"
+[ "${ifname:0:1}" == "@" ] && exit 0
+
+/etc/init.d/icwmp_xmppd reload &
+

ieee1905/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2019 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ieee1905
+PKG_VERSION:=1.1.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=3008fe46ee9247f0203b3a125fddebadbdd7dcdc
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ieee1905
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=IEEE1905 handler
+  DEPENDS:= +libwifi +ubox +libpicoevent +libpcap +libopenssl +libuci +libjson-c
+endef
+
+define Package/ieee1905/description
+ IEEE1905 stack with extended functionalities.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-D_GNU_SOURCE \
+	-DSEND_EMPTY_TLVS \
+	-DFIX_BROKEN_TLVS \
+	-DSPEED_UP_DISCOVERY \
+	-DREGISTER_EXTENSION_BBF
+	#-DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS \
+
+#define Build/Prepare
+#        $(CP) -rf ./ieee1905/* $(PKG_BUILD_DIR)/
+#endef
+
+define Package/ieee1905/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/hotplug.d
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/button
+	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
+	$(INSTALL_BIN) ./files/etc/hotplug.d/button/11-ieee1905 $(1)/etc/hotplug.d/button/11-ieee1905
+	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libs/*.so $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,ieee1905))

ieee1905/files/etc/config/ieee1905

@@ -0,0 +1,39 @@
+config ieee1905
+        option enabled '1'
+        option debug  true
+
+config meshcomms 'global'
+        option enabled '1'
+        option basemacint 'wan'
+        option mapall true
+#        option registrar 'rai0'
+        option debug_level  2
+        option port  8888
+        option cmdu_event false
+
+#config al-iface
+#        option enabled '1'
+#        option ifname 'br-lan'
+#        option media 'bridge'
+#        option manufacturer_name 'Broadcom'
+#        option model_name 'Eth EG400'
+#        option model_number '00002'
+#        option device_name 'EG400R1'
+
+#config al-iface
+#        option enabled '1'
+#        option ifname 'wl0'
+#        option media 'ap'
+#        option manufacturer_name 'Mediatek'
+#        option model_name 'WIFI EX400'
+#        option model_number '00001'
+#        option device_name 'EX400R0'
+
+#config al-iface
+#        option enabled '1'
+#        option ifname 'wl1'
+#        option media 'ap'
+#        option manufacturer_name 'Mediatek'
+#        option model_name 'WIFI EX400'
+#        option model_number '00001'
+#        option device_name 'EX400R0'

ieee1905/files/etc/hotplug.d/button/11-ieee1905

@@ -0,0 +1,36 @@
+#!/bin/sh
+
+TOPOLOGY_FILE="/tmp/topology_change"
+WPS_FILE="/tmp/virtual_push_button"
+
+handle_topology_change() {
+	[ -f ${TOPOLOGY_FILE} ] && \
+		touch ${TOPOLOGY_FILE}
+}
+
+handle_wps() {
+	[ -f ${WPS_FILE} ] && \
+		touch ${WPS_FILE}
+}
+
+case "$ACTION" in
+	add|register)
+		[ "wifibutton" == "$INTERFACE" -o "ecobutton" == "$INTERFACE" ] && {
+			handle_wps
+		}
+		[ "wifi_2g" == "$INTERFACE" ] && {
+			handle_wps
+		}
+		[ "wifi_5g" == "$INTERFACE" ] && {
+			handle_wps
+		}
+		[ "wpsbutton" == "$INTERFACE" ] && {
+			handle_wps
+		}
+		[ "wpscbutton" == "$INTERFACE" ] && {
+			handle_topology_change
+		}
+        ;;
+        remove|unregister)
+        ;;
+esac

ieee1905/files/etc/init.d/ieee1905

@@ -0,0 +1,197 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ieee1905d
+MESH_CONF=/tmp/meshcomms.config
+INTERFACE=""
+
+validate_global_section()
+{
+	uci_validate_section ieee1905 meshcomms "${1}" \
+		'enabled:bool:false' \
+		'basemacint:string:wan' \
+		'almac:string' \
+		'registrar:string' \
+		'mapall:bool:true' \
+		'debug_level:uinteger:5' \
+		'port:port:8888' \
+		'cmdu_event:bool:true'
+}
+
+validate_ieee1905_section()
+{
+	uci_validate_section ieee1905 ieee1905 "${1}" \
+		'debug:bool:true' \
+		'enabled:bool:true'
+}
+
+get_device_name() {
+	local device
+	# Get wan L3 interface
+	ubus list |grep -iq network.interface.${1}
+	if [ "$?" -eq 0 ]; then
+		json_load "$(ubus -t 2 call network.interface.${1} status)"
+		json_get_var device device
+		echo ${device}
+	fi
+}
+
+get_interface_mac() {
+	local l3 basemac
+	l3=$(get_device_name ${1})
+	if [ -n ${l3} ]; then
+		json_load "$(ubus -t 2 call network.device status "{\"name\":\"${l3}\"}")"
+		json_get_var basemac macaddr
+	fi
+	local first=0x$(echo $basemac |cut -d : -f 1)
+	local rest=$(echo $basemac |cut -d : -f 2-)
+	# Set local bit
+	first=$((first|2))
+	first=$(printf "%x" $first)
+	basemac="${first}:${rest}"
+	echo ${basemac}
+}
+
+validate_al_section()
+{
+	uci_validate_section ieee1905 al-iface "${1}" \
+		'enabled:bool:false' \
+		'ifname:string' \
+		'media:string:eth' \
+		'manufacturer_name:string:iopsys' \
+		'model_name:string' \
+		'model_number:string' \
+		'device_name:string'
+}
+
+configure_interface()
+{
+	local ifname media enabled manufacturer_name model_name model_number device_name
+	validate_al_section ${1} || {
+		echo "Validation of global section failed"
+		return 1;
+	}
+
+	if [ ${enabled} -eq 0 ]; then
+		return;
+	fi
+
+	if [ -z ${INTERFACE} ]; then
+		INTERFACE=${ifname}
+	else
+		INTERFACE="${INTERFACE},${ifname}"
+	fi
+
+	json_add_object
+	json_add_string ifname ${ifname}
+	json_add_string media ${media}
+	json_add_string manufacturer_name ${manufacturer_name}
+	json_add_string model_name ${model_name}
+	json_add_string model_number ${model_number}
+	json_add_string device_name ${device_name}
+	json_close_object
+}
+
+configure_meshcomms()
+{
+	local enabled almac basemacint mapall debug_level port l3device basemac intf registrar cmdu_event
+
+	validate_global_section global || {
+		echo "Validation of global section failed"
+		return 1;
+	}
+
+	if [ -z ${almac} ]; then
+		basemac=$(get_interface_mac ${basemacint})
+	else
+		basemac=${almac}
+	fi
+
+
+	local fname cname model cUrl
+	fname=$(db get hw.board.boardId)
+	cname=$(db get hw.board.iopVerCustomer)
+	model=$(db get hw.board.routerModel)
+	cUrl="http://192.168.1.1"
+
+	json_init
+	# fill the al-iface info
+	json_add_array al-iface
+	config_foreach configure_interface al-iface
+	json_close_array
+	json_add_object deviceInfo
+	json_add_string friendly_name ${fname}
+	json_add_string manufacturer_name ${cname}
+	json_add_string model ${model}
+	json_add_string control_url ${cUrl}
+	json_close_object
+	json_add_object meshcomms
+	json_add_int enabled ${enabled}
+	json_add_string mac ${basemac}
+	json_add_string interfaces ${INTERFACE}
+	json_add_int map ${mapall}
+	json_add_string registrar ${registrar}
+	json_add_int debug_level ${debug_level}
+	json_add_int port ${port}
+	json_add_int cmdu_event ${cmdu_event}
+	json_close_object
+
+	json_dump >${MESH_CONF}
+
+}
+
+configure_ieee1905()
+{
+	local enabled debug
+
+	validate_ieee1905_section ${1} || {
+		echo "Validation of ieee1905 section failed"
+		exit 1;
+	}
+
+	if [ ${debug} -eq 1 ]; then
+		# Forward stdout of the command to logd
+		procd_set_param stdout 1
+		# Same for stderr
+		procd_set_param stderr 1
+	fi
+
+	if [ ${enabled} -ne 1 ]; then
+		exit 0;
+	fi
+}
+
+configure_network() {
+	[ -f ${MESH_CONF} ] && rm ${MESH_CONF}
+
+	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
+	if [ "$?" -ne 0 ]; then
+		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
+		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
+	fi
+
+	config_load ieee1905
+	config_foreach configure_ieee1905 ieee1905
+	config_foreach configure_meshcomms meshcomms
+}
+
+start_service() {
+	procd_open_instance ieee1905
+	procd_set_param command ${PROG}
+	configure_network
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger "network"
+	procd_add_reload_trigger "netmode"
+}

ifbt/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifbt
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=6a279efa5046ace0681a1d0e79592a120f80e171
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=README
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+TARGET_PLATFORM:=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
+else
+$(info (UNEXPECTED CONFIG TARGET))
+endif
+
+export TARGET_PLATFORM
+
+define Package/ifbt
+	CATEGORY:=Utilities
+	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
+	TITLE:=Fast BSS Transition
+endef
+
+define Package/ifbt/description
+	ifbt is Iopsys application for fast BSS transition
+endef
+
+define Package/ifbt/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifbt))

ifsi/Makefile

@@ -1,39 +0,0 @@
-#
-# Copyright (C) 2015 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifsi
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-LDFLAGS+= \
-        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
-
-define Package/ifsi
-  CATEGORY:=Utilities
-  DEPENDS:=+ubus +libubox
-  TITLE:=Inteno Functional Script Interface
-endef
-
-define Package/ifsi/description
-	Inteno Functional Script Interface
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Package/ifsi/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifsi))

ifsi/src/Makefile

@@ -1,17 +0,0 @@
-CC		= gcc
-CFLAGS		= -g -Wall
-LOCLIBS		= 
-LIBS		= -lubus -lubox -lblobmsg_json
-OBJS		= ifsi.o
-SRCS		= ifsi.c
-LIBSRCS		= 
-ISRCS		= 
-
-all: ifsi
-
-ifsi: ${OBJS}
-	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
-
-clean:
-	rm -f ifsi *.o
-

ifsi/src/ifsi.c

@@ -1,74 +0,0 @@
-/*
- * ifsi -- Inteno functional script interface
- *
- * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
- *
- * Author: dev@inteno.se
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <unistd.h>
-
-#include <libubox/blobmsg.h>
-#include <libubox/blobmsg_json.h>
-#include <libubox/uloop.h>
-
-#include <libubus.h>
-
-static struct ubus_context *ctx;
-static struct ubus_event_handler event_listener;
-static struct blob_buf b;
-
-
-static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
-			  const char *type, struct blob_attr *msg)
-{
-	char *str;
-	uint32_t id;
-
-	str = blobmsg_format_json(msg, true);
-	fprintf(stdout, "I got %s event %s\n", type, str);
-	free(str);
-}
-
-int main(int argc, char **argv)
-{
-	const char *ubus_socket = NULL;
-	int ret;
-
-	uloop_init();
-
-	ctx = ubus_connect(ubus_socket);
-	if (!ctx) {
-		fprintf(stderr, "Failed to connect to ubus\n");
-		return 1;
-	}
-
-	ubus_add_uloop(ctx);
-
-	event_listener.cb = receive_event;
-	ret = ubus_register_event_handler(ctx, &event_listener, "*");
-	if (ret)
-		fprintf(stderr, "Couldn't register to router events\n");
-
-	uloop_run();
-
-	ubus_free(ctx);
-	uloop_done();
-
-	return 0;
-}
-

imonitor/Makefile

@@ -0,0 +1,44 @@
+#
+# Copyright (C) 2018 iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=imonitor
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_PARALLEL:=1
+PKG_INSTALL:=1
+
+PKG_SOURCE_PROTO=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
+PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_INSTALL:=1
+PKG_BUILD_PARALLEL:=1
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/imonitor
+	CATEGORY:=Utilities
+	TITLE:=iopsysWrt process supervisor
+	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
+endef
+
+define Package/imonitor/description
+	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
+endef
+
+define Package/imonitor/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
+	$(INSTALL_DIR) $(1)/etc/config
+endef
+
+$(eval $(call BuildPackage,imonitor))

imonitor/files/etc/config/imonitor

@@ -0,0 +1,9 @@
+config monitor
+	option app 'test'
+	option test 'echo test'
+	option stream 'stdout'
+	option string_match 'TEST'
+	option execute 'echo executing test'
+	option interval '10'
+	option nr_tests '2'
+

imonitor/files/etc/init.d/imonitor

@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Start the imonitor
+#
+
+START=99
+STOP=01
+
+USE_PROCD=1
+NAME=imonitor
+
+start_service() {
+	procd_open_instance
+	procd_set_param command "imonitor"
+	procd_set_param stdout 1
+        procd_set_param stderr 1
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop() {
+	service_stop imonitor
+}
+
+reload_service() {
+	stop
+	start
+}
+

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 Inteno
+# Copyright (C) 2016 iopsys
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,14 +12,17 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=2d474e9ff37b9cfcffd4b9ac8eba8db03eb38a21
+PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se/inbd
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 
@@ -34,7 +37,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
+	TITLE:=iopsys Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

inotify-tools/Makefile

@@ -20,6 +20,9 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
+
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

inteno-netmodes/Makefile

@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=inteno-netmodes
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inteno-netmodes
-  CATEGORY:=Base system
-  TITLE:=Predefined Network Modes
-endef
-
-define Package/inteno-netmodes/description
-	Predefined Network Modes
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/inteno-netmodes/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler

@@ -1,118 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions/network.sh
-
-network_get_ipaddr ip $INTERFACE
-repeaterready="$(uci -q get netmode.setup.repeaterready)"
-
-[ -z "$ip" ] && exit
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-set_disabled() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-switch_mode() {
-	[ "$repeaterready" == "1" ] || return
-
-	# flush the ip on br-lan; br-lan will anyhow be deleted.
-	# this is needed if the ip received on the wan is also from the same net
-	ip addr flush dev br-lan
-
-	# flush iptables in case the MASTER
-	# tries to configure us before
-	# firewall is disabled the proper way
-	iptables -F
-
-	ubus call leds set  '{"state" : "allflash"}'
-
-	local ret=0
-	# let netmode-conf up to 20 seconds before switching mode
-	for tm in 2 4 6 8; do
-		if [ -f /tmp/wificontrol.txt ]; then
-			ret=1
-			break
-		fi
-		sleep $tm
-	done
-
-	# let netmode-conf take over
-	[ $ret -eq 1 ] && return
-
-	# go head with switching mode
-	touch -f /tmp/switching_mode
-	echo "Switching to 'extender' mode" > /dev/console
-	uci -q set netmode.setup.curmode='repeater'
-	uci set netmode.setup.repeaterready=0
-	uci commit netmode
-	/etc/init.d/netmode reload
-	echo "Restarting network services" > /dev/console
-	ubus call network reload
-	wifi reload nodat
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-	rm -f /tmp/switching_mode
-}
-
-test_ip() {
-	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
-		# private IP
-		switch_mode
-		set_disabled 1
-	else
-		# public IP
-		set_disabled 0
-		[ "$1" -eq "1" ] && {
-			uci set netmode.setup.repeaterready=0
-			uci commit netmode
-			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
-			[ "$pid" != "" ] && kill -9 $pid
-			pid="$(pidof netmode-client-detect)"
-			[ "$pid" == "" ] && /sbin/netmode-client-detect &
-
-			# set default JUCI page to overview
-			uci -q set juci.juci.homepage="overview"
-			uci commit juci
-		}
-	fi
-}
-
-case "$(uci -q get netmode.setup.curmode)" in
-		repeater*) test_ip ;;
-		*) [ "$repeaterready" == "1" ] && test_ip 1;;
-esac
-

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -1,98 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-include /lib/network
-
-ps | grep hotplug | grep button && exit
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-[ $MTK -eq 1 ] && WANDEV="eth0.2"
-
-[ "$INTERFACE" != "$WANDEV" ] && exit
-
-defroute=$(ip route | grep default | awk '{print$3}')
-
-case "$(uci get netmode.setup.curmode)" in
-		repeater*)
-			echo "Preparing to switch mode"
-		;;
-		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-			exit
-		;;
-esac
-
-get_wifi_wet_interface() {
-	handle_interface() {
-		config_get mode "$1" mode
-		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
-			config_get ifname "$1" ifname
-			echo "$ifname"
-		fi
-	}
-	config_load wireless
-	config_foreach handle_interface wifi-iface
-}
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
-link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-
-case "$ACTION" in
-	add|register)
-		[ "$link" == "down" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
-		echo "Autoswitch to Extender mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# remove wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
-			;;
-		esac
-		uci commit wireless
-		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-		ubus call leds set  '{"state" : "normal"}'
-	;;
-	remove|unregister)
-		[ "$link" == "up" ] && return
-		ubus call leds set  '{"state" : "allflash"}'
-		echo "Autoswitch to Repeater mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# add wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
-			;;
-		esac
-		uci commit wireless
-		#remove wan ethernet port
-		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
-			killall -9 wifi
-			wifi reload nodat
-			killall -USR1 udhcpc
-		}
-		ubus call leds set  '{"state" : "normal"}'
-	;;
-esac
-

inteno-netmodes/files/etc/init.d/netmode

@@ -1,264 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=10
-USE_PROCD=1
-
-. /usr/share/libubox/jshn.sh
-. /lib/network/config.sh
-
-local modedir=$(uci -q get netmode.setup.dir)
-[ -n "$modedir" ] || modedir="/etc/netmodes"
-
-get_device() {
-	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
-	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
-        local cnt=1
-        local idx=0
-
-	local pnum=$(echo $PORT_NAMES | wc -w)
-
-	if [ $pnum -le 2 ]; then
-		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
-	fi
-
-	# get index of interface name
-	for i in $PORT_NAMES; do
-		if [ "$i" == "$1" ]; then
-			idx=$cnt
-		fi
-		cnt=$((cnt+1))
-	done
-
-        # get port name from index
-	cnt=1
-	for i in $PORT_ORDER; do
-		if [ "$cnt" == "$idx" ]; then
-			echo $i
-		fi
-		cnt=$((cnt+1))
-	done
-}
-
-populate_netmodes() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	delete_netmode() {
-		uci delete netmode.$1
-	}
-
-	config_load netmode
-
-	config_foreach delete_netmode netmode
-	uci commit netmode
-
-	wan=$(get_device WAN)
-	lan1=$(get_device LAN1)
-	lan2=$(get_device LAN2)
-	lan3=$(get_device LAN3)
-	lan4=$(get_device LAN4)
-	lan5=$(get_device LAN5)
-
-	for file in $(find $modedir -type f); do
-		conf="$(echo $file | cut -d'/' -f5)"
-		if [ "$conf" == "layer2_interface_ethernet" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		fi
-		if [ "$conf" == "network" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-
-			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
-			uci -q set $file.wan.ifname="$ifname"
-			uci -q commit $file
-		fi
-	done
-
-	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
-	for mode in $(ls $modedir); do
-
-			case "$mode" in
-				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
-				;;
-			esac
-
-			lang=""
-			desc=""
-			exp=""
-			uci -q set netmode.$mode=netmode
-			json_load "$(cat $modedir/$mode/DETAILS)"
-
-			if json_select excluded_boards; then
-				exclude=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							uci -q delete netmode.$mode
-							exclude=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $exclude -eq 1 ] && continue
-			fi
-
-			if json_select acl; then
-				_i=1
-				while json_get_var user $_i; do
-					uci add_list netmode.$mode._access_r="$user"
-					_i=$((_i+1))
-				done
-				json_select ..
-			fi
-
-			json_select description
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var desc $lang
-				uci -q set netmode.$mode."desc_$lang"="$desc"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
-				json_select ..
-			done
-			json_select ..
-
-			json_select explanation
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var exp $lang
-				uci -q set netmode.$mode."exp_$lang"="$exp"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
-				json_select ..
-			done
-			json_select ..
-
-			json_get_var cred credentials
-			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var ulb uplink_band
-			uci -q set netmode.$mode.uplink_band="$ulb"
-			json_get_var reboot reboot
-			uci -q set netmode.$mode.reboot="$reboot"
-	done
-
-	config_get curmode setup curmode
-	[ -d /etc/netmodes/$curmode ] || {
-		[ "$(db -q get hw.board.hardware)" == "EX400" ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
-	}
-
-	uci commit netmode
-}
-
-switch_netmode() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode conf repeaterready
-
-	config_load netmode
-
-	config_get repeaterready setup repeaterready "0"
-	if [ "$repeaterready" == "1" ] ; then
-		uci -q set netmode.setup.repeaterready="0"
-		uci commit netmode
-	fi
-
-	config_get curmode setup curmode
-	if [ "$curmode" == "repeater" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="repeater_mtk_5g_up_dual_down"
-		else
-			curmode="repeater_brcm_2g_up_dual_down"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	[ -d "/etc/netmodes/$curmode" ] || return
-	cp /etc/netmodes/$curmode/* /etc/config/
-	rm -f /etc/config/DETAILS
-	sync
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-	local askcred=$(uci -q get netmode.$curmode.askcred)
-	if [ "$reboot" == "0" ]; then
-		/etc/init.d/enviroment reload
-		case "$curmode" in
-			routed*)
-				ubus call uci commit '{"config":"network"}'
-			;;
-		esac
-	else
-		reboot &
-	fi
-}
-
-start_client_listener() {
-	local curmode repeaterready ulcpid
-
-	config_load netmode
-	config_get repeaterready setup repeaterready 0
-
-	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
-
-	[ $repeaterready -eq 1 ] && {
-		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		kill -9 $ulcpid >/dev/null 2>&1
-		return
-	}
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-			kill -9 $ulcpid >/dev/null 2>&1
-		;;
-		*)
-			pidof netmode-client-detect || /sbin/netmode-client-detect &
-		;;
-	esac
-}
-
-start_service() {
-	populate_netmodes
-	start_client_listener
-}
-
-reload_service() {
-        switch_netmode
-
-	# set default JUCI page to overview
-	uci -q set juci.juci.homepage="overview"
-	uci commit juci
-
-	start_client_listener
-}
-
-stop_service() {
-	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger netmode
-}
-

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -1,37 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -1,22 +0,0 @@
-{
-	"description": [
-		{ "en" : "VoIP + Bridged IPTV" },
-		{ "sv" : "VoIP + Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400",
-		"F*"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -1,117 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd

@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS

@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network

@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless

@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS

@@ -1,20 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"F*"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet

@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network

@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd

@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-