dectmngr :Remove extra verbose syslog for firmware upgrading on the base station

map-agent: 6.6.2
map-controller: 5.4.5
2026-01-11 15:14:17 +08:00 · 2022-02-03 16:10:19 +01:00 · 2022-02-03 12:45:18 +01:00 · 2022-02-02 17:07:02 +01:00 · 2022-02-02 17:06:20 +01:00 · 2022-02-02 11:16:01 +01:00
59 changed files with 1284 additions and 754 deletions
--- a/bbf/Makefile
+++ b/bbf/Makefile
@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.5.6
+PKG_VERSION:=6.4.18
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa25738c8e923a2ff54aaccb44bf8126435789f0
+PKG_SOURCE_VERSION:=2758c0380e9dbec87b119df239aee29c7ed1ec48
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
--- a/crashlog/Makefile
+++ b/crashlog/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))
--- a/crashlog/files/etc/dropbear/logid
+++ b/crashlog/files/etc/dropbear/logid
--- a/crashlog/files/etc/init.d/corelog
+++ b/crashlog/files/etc/init.d/corelog
@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}
--- a/crashlog/files/etc/init.d/crashlog
+++ b/crashlog/files/etc/init.d/crashlog
@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}
--- a/crashlog/files/sbin/logcore
+++ b/crashlog/files/sbin/logcore
@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+
--- a/crashlog/files/usr/sbin/logssh
+++ b/crashlog/files/usr/sbin/logssh
@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@
--- a/crashlog/readme
+++ b/crashlog/readme
@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+
--- a/crashlog/scp_upload
+++ b/crashlog/scp_upload
@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}
--- a/dectmngr/Makefile
+++ b/dectmngr/Makefile
@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.1
+PKG_VERSION:=3.4.7

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ef9d4c6124d0ca66f048f3d678d9a25f13aa4207
+PKG_SOURCE_VERSION:=1894596674aa655691ee5b6ff3d283ca4cf5d2eb
 PKG_MIRROR_HASH:=skip
 endif

@@ -53,7 +53,6 @@ endif

 TARGET_CFLAGS += \
 	-Wall \
-        -Werror \
 	-I$(STAGING_DIR)/usr/include/libxml2

 ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
--- a/dectmngr/files/etc/dspg/04130010.bin
+++ b/dectmngr/files/etc/dspg/04130010.bin
--- a/dectmngr/files/etc/dspg/04131C10.bin
+++ b/dectmngr/files/etc/dspg/04131C10.bin
--- a/easy-soc-libs/Makefile
+++ b/easy-soc-libs/Makefile
@@ -13,7 +13,7 @@ PKG_RELEASE:=1
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=4b4f04fb2485909fc56b409ae89296a815a98988
+PKG_SOURCE_VERSION:=dd2ab2e5b83d585849aae3d539c1a8cd6dcb7146
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
--- a/endptmngr/Makefile
+++ b/endptmngr/Makefile
@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=94df920d39e8589c7ac7f5523bf372d48ef24c5e
+PKG_SOURCE_VERSION:=548fa04d2714feeadb500192905fa6fb8172e6dd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -56,10 +56,6 @@ define Build/Prepare
 endef
 endif

-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
-
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
--- a/gryphon-led-module/Makefile
+++ b/gryphon-led-module/Makefile
@@ -45,12 +45,12 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
 	MODULES_SUBDIR:=lib/modules/4.19.183
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+	TARGET_CROSS:=$(CONFIG_BCM_TOOLCHAIN)/bin/$(CONFIG_BCM_TOOLTUPLE)

 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+		TARGET_CROSS:=/opt/toolchains/crosstools-aarch64-gcc-9.2-linux-4.19-glibc-2.30-binutils-2.32/bin/aarch64-buildroot-linux-gnu-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=8.2.27
+PKG_VERSION:=8.2.25
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=da88c8c28656b2db54ab205d26faccda68546c05
+PKG_SOURCE_VERSION:=22a1606d972d2dd05b23abe94323f72232727b37
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
--- a/ieee1905/Makefile
+++ b/ieee1905/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=ieee1905
-PKG_VERSION:=4.6.8
+PKG_VERSION:=4.6.0

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=43cc5cac9a7dc1fd3a78f60509800d853d67d476
+PKG_SOURCE_VERSION:=373602c3644ead5c61aece58e1f88f52838bb38b
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -120,7 +120,6 @@ define Build/InstallDev/libieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef
--- a/iop/config
+++ b/iop/config
@@ -1,139 +1,32 @@
-############
-# Generic #
-##########
-
-# Build #
-CONFIG_BUILD_LOG=y
+CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-# CONFIG_SIGNED_PACKAGES is not set
-
-# Image #
-CONFIG_TARGET_CUSTOMER="IOPSYS"
-CONFIG_TARGET_ROOTFS_TARGZ=y
-
-# /etc/banner and /etc/device_info #
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-
-# /lib/preinit #
-CONFIG_PREINITOPT=y
-# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
-CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
-CONFIG_TARGET_PREINIT_TIMEOUT=1
-# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
-# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
-CONFIG_TARGET_PREINIT_IFNAME=""
-CONFIG_TARGET_PREINIT_IP=""
-CONFIG_TARGET_PREINIT_NETMASK=""
-CONFIG_TARGET_PREINIT_BROADCAST=""
-
-# Mirror #
-CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
-
-
-##################
-# IOWRT Add-ons #
-################
-
-# EasySoC HAL #
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
-CONFIG_PACKAGE_wifimngr=y
-
-# Multi-AP #
-CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-topology=y
-CONFIG_PACKAGE_wfadatad=y
-CONFIG_PACKAGE_wfadatad-collector=y
-
-# Network #
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_owsd=m
-CONFIG_PACKAGE_urlfilter=y
-
-# System #
-CONFIG_PACKAGE_imonitor=m
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rulengd=y
-
-# TR-x69 #
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_icwmp=y
-CONFIG_PACKAGE_obuspa=y
-CONFIG_PACKAGE_bulkdata=y
-CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_stunc=m
-CONFIG_PACKAGE_swmodd=m
-CONFIG_PACKAGE_twamp=m
-CONFIG_PACKAGE_udpechoserver=m
-CONFIG_PACKAGE_xmppc=m
-
-# WebGUI #
-CONFIG_PACKAGE_sulu=y
-
-
-############
-# Network #
-##########
-
-# Protocols #
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
+CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_gre=y
-CONFIG_PACKAGE_map=y
-CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_odhcp6c=y
-CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppoe=y
-CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
-CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
-CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_xl2tpd=y
-
-# Services #
-CONFIG_PACKAGE_atftp=m
-CONFIG_PACKAGE_atftpd=m
 CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_ds-lite=y
+CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_getopt=y
+CONFIG_PACKAGE_gre=y
+CONFIG_PACKAGE_icwmp=y
+CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-topology=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nginx=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_vsftpd-tls=m
-
-# Tools and Utilities #
-CONFIG_PACKAGE_curl=y
-CONFIG_PACKAGE_libcurl=y
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_wfadatad=y
+CONFIG_PACKAGE_wfadatad-collector=y
+CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_inbd=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
@@ -141,67 +34,73 @@ CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_traceroute6=y
-
-
-############
-# System  #
-##########
-
-CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_getopt=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libustream-openssl=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set
+CONFIG_PACKAGE_libreswan=m
+CONFIG_PACKAGE_libwifi=y
 CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rpcd-mod-rpcsys=y
-CONFIG_PACKAGE_rpcd-mod-rrdns=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_uledd=y
-# The urandom-seed package is very strange. It seeds urandom with urandom...
-# Disable it. Most SoCs nowadays has HW random generators anyway.
-# CONFIG_PACKAGE_urandom-seed is not set
-# CONFIG_PACKAGE_urngd is not set
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_uuidgen=y
-CONFIG_PACKAGE_zoneinfo-core=y
-CONFIG_PACKAGE_zoneinfo-europe=y
-
-
-################
-# LuCI WebGUI #
-##############
-
-# BEGIN: luci-nginx metapackage with some changes
-# We do not want libiwinfo-lua on non-WiFi targets, but it is already
-# depended on by other luci-packages, so no need to take it in explicitly
-CONFIG_PACKAGE_luci-mod-admin-full=y
-CONFIG_PACKAGE_luci-app-firewall=y
-CONFIG_PACKAGE_luci-app-opkg=y
-CONFIG_PACKAGE_luci-proto-ppp=y
-CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-nginx=y
 # CONFIG_LUCI_JSMIN is not set
 # CONFIG_LUCI_CSSTIDY is not set
 CONFIG_PACKAGE_luci-mod-dashboard=y
 CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-CONFIG_PACKAGE_nginx-mod-luci=y
-
-
-############
-# BusyBox #
-##########
-
-CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_PACKAGE_map=y
+CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mwan3=y
+CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_ntfs-3g=y
+CONFIG_PACKAGE_ntpd=y
+CONFIG_PACKAGE_obuspa=y
+CONFIG_PACKAGE_odhcp6c=y
+CONFIG_PACKAGE_odhcpd=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_OPENSSL_WITH_COMPRESSION=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_PACKAGE_owsd=y
+CONFIG_PACKAGE_periodicstats=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_ppp-mod-pppoa=y
+CONFIG_PACKAGE_ppp-mod-pppoe=y
+CONFIG_PACKAGE_ppp-mod-pppol2tp=y
+CONFIG_PACKAGE_ppp-mod-pptp=y
+CONFIG_PACKAGE_ppp-multilink=y
+# CONFIG_PACKAGE_ppp is not set
+# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_relayd=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-rpcsys=y
+CONFIG_PACKAGE_rulengd=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_sulu=y
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_traceroute6=y
+CONFIG_PACKAGE_uledd=y
+CONFIG_PACKAGE_umbim=y
+CONFIG_PACKAGE_uqmi=y
+CONFIG_PACKAGE_urlfilter=y
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_uspd=y
+CONFIG_PACKAGE_vsftpd-tls=m
+CONFIG_PACKAGE_wwan=y
+CONFIG_PACKAGE_wifimngr=y
+CONFIG_PACKAGE_uuidgen=y
+CONFIG_PACKAGE_xl2tpd=y
+CONFIG_PACKAGE_zoneinfo-core=y
+CONFIG_PACKAGE_zoneinfo-europe=y
+CONFIG_TARGET_CUSTOMER="IOPSYS"
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
@@ -221,7 +120,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
-# CONFIG_BUSYBOX_CONFIG_IP is not set
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
@@ -285,3 +183,40 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+# CONFIG_LIBCURL_MBEDTLS is not set
+CONFIG_LIBCURL_OPENSSL=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_SIGNED_PACKAGES is not set
+# CONFIG_BUSYBOX_CONFIG_IP is not set
+CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
+
+# Generation of /etc/banner.
+CONFIG_IMAGEOPT=y
+CONFIG_VERSIONOPT=y
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
+CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
+
+# Disable as much as possible of OpenWrt messy "pre-init" stuff.
+CONFIG_PREINITOPT=y
+# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
+CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
+CONFIG_TARGET_PREINIT_TIMEOUT=1
+# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
+# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
+CONFIG_TARGET_PREINIT_IFNAME=""
+CONFIG_TARGET_PREINIT_IP=""
+CONFIG_TARGET_PREINIT_NETMASK=""
+CONFIG_TARGET_PREINIT_BROADCAST=""
+
+# Generate rootfs tar file
+CONFIG_TARGET_ROOTFS_TARGZ=y
+
+# The urandom-seed package is very strange. It seeds urandom with urandom...
+# Disable it. Most SoCs nowadays has HW random generators anyway.
+# CONFIG_PACKAGE_urandom-seed is not set
+# CONFIG_PACKAGE_urngd is not set
+
+# We use OpenSSL, no need to ship multiple TLS libraries
+CONFIG_PACKAGE_libustream-openssl=y
+# CONFIG_PACKAGE_libustream-wolfssl is not set
--- a/libjwt/Makefile
+++ b/libjwt/Makefile
@@ -0,0 +1,54 @@
+
+# Copyright (C) 2018 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libjwt
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
+PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+PKG_LICENSE:=LGPLv3
+PKG_LICENSE_FILES:=COPYING
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libjwt
+  CATEGORY:=Libraries
+  DEPENDS:=+libopenssl +jansson
+  TITLE:= libjwt
+endef
+
+
+#TARGET_CFLAGS += \
+#	-I$(STAGING_DIR)/usr/include
+#	-I$(STAGING_DIR)/usr/include/libnl3
+
+#MAKE_FLAGS += \
+#	CFLAGS="$(TARGET_CFLAGS)" \
+#	LDFLAGS="$(TARGET_LDFLAGS)" \
+#	FPIC="$(FPIC)" \
+#	PLATFORM="$(TARGET_PLATFORM)" \
+#	subdirs="$(subdirs)"
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+define Package/libjwt/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libjwt))
--- a/map-agent/Makefile
+++ b/map-agent/Makefile
@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=map-agent
-PKG_VERSION:=7.1.0
+PKG_VERSION:=6.6.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=5fbe1ee1c95cba679c78d658a56366541dee4795
+PKG_SOURCE_VERSION:=ca0a34926e155338964ff55f8c9e28a80b38bc78
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>

 PKG_LICENSE:=PROPRIETARY IOPSYS
--- a/map-agent/files/etc/init.d/mapagent
+++ b/map-agent/files/etc/init.d/mapagent
@@ -7,40 +7,30 @@ USE_PROCD=1

 MAP_DEV="map_dev"
 MAP_IF="map"
+MAP_VETH="lei"

 create_map() {
-	ip link add lei type veth peer name lei_map 2>/dev/null
-	ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-
 	uci -q set network.${MAP_DEV}=device
 	uci -q set network.${MAP_DEV}.name=br-map
 	uci -q set network.${MAP_DEV}.type=bridge
-
-	uci -q show network.${MAP_DEV}.ports | grep -q lei_map || {
-		uci -q add_list network.${MAP_DEV}.ports='lei_map'
-	}
+	uci -q set network.${MAP_DEV}.bridge_empty=1

 	uci -q set network.${MAP_IF}=interface
 	uci -q set network.${MAP_IF}.device=br-map
 	uci -q set network.${MAP_IF}.is_lan=1

-	uci -q show network.br_lan.ports | grep -q lei_lan || {
-		uci -q add_list network.br_lan.ports="lei_lan"
-	}
-
 	uci -q set mapagent.agent.al_bridge=br-map

 	uci -q commit

 	ubus call network reload
-	ubus -t 5 wait_for network.interface.map
+	ubus -t 5 wait_for network.device

-	brctl addif br-map lei_map 2>/dev/null
-	brctl addif br-lan lei_lan 2>/dev/null
-
-	ip link set lei up 2>/dev/null
-	ip link set lei_map up 2>/dev/null
-	ip link set lei_lan up 2>/dev/null
+	ip link add ${MAP_VETH} type veth peer name ${MAP_VETH}_lan 2>/dev/null
+	brctl addif br-map ${MAP_VETH} 2>/dev/null
+	brctl addif br-lan ${MAP_VETH}_lan 2>/dev/null
+	ip link set ${MAP_VETH} up 2>/dev/null
+	ip link set ${MAP_VETH}_lan up 2>/dev/null
 }

 remove_map() {
--- a/map-agent/files/lib/wifi/traffic_separation
+++ b/map-agent/files/lib/wifi/traffic_separation
@@ -4,15 +4,11 @@

 ### Traffic Separation ###

-dbg() {
-	logger -t traffic_separation $@
-}
-
 ts_sub() {

 	ts_usage() {
 		cat <<EOF
-Usage: $0 [create|delete|populate|primary|reload]
+Usage: $0 [create|delete|populate]
 Traffic Separation related functions.
 create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
 create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
@@ -20,7 +16,7 @@ create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethe
 delete <iface>				- delete vlan device
 populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
 primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
-reload     				- reload network with new configuration
+     
 EOF
 	exit 1
 	}
@@ -30,53 +26,23 @@ EOF
 		echo $bridge
 	}

-	set_wireless_bridge() {
-		config_load wireless
-
-		_set_network() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
-
-			config_get ifname $sec ifname
-			[ "$iface" != "$ifname" ] && continue
-
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
-
-			config_get network $sec network
-			local new_network=${bridge##br-}
-			if [ "$new_network" != "$network" ] ; then
-				uci -q set wireless.${sec}.network=${new_network}
-				uci commit wireless
-			fi
-
-			brctl addif $bridge $iface &> /dev/null
-		}
-
-		config_foreach _set_network wifi-iface ${1} ${2}
-	}
-
 	ts_create() {

 		_create_vlan_dev() {
 			iface=$1				# real iface
 			vid=$2					# Vlan ID
-			bridge=$3				# bridge iface should be connected
-			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+			bridge="$(_get_bridge $iface)"		# bridge iface is connected to
 			vlan_dev=${iface}_vlan${vid}		# name of vlan device to create

 			# remove interface from bridge if it is in one
-			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
+			[ -n "$bridge" ] && brctl delif $bridge $iface &> /dev/null

 			# create vlan device
-			ip link show $vlan_dev &> /dev/null && vlanctl --if-delete $vlan_dev &> /dev/null
 			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg

 			# bring the vlan device up and add back to bridge if it was in one
-			brctl addif $bridge $vlan_dev &> /dev/null
-			ip link set $vlan_dev up
+			[ -n "$bridge" ] && brctl addif $bridge $vlan_dev &> /dev/null
+			ip link set dev $vlan_dev up

 			echo $vlan_dev
 		}
@@ -84,18 +50,16 @@ EOF
 		ts_create_fh() {
 			iface=$1				# fh iface
 			vid=$2					# SSID specific (secondary) or primary vid
-			bridge=$3

-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
+			[ -n "$iface" ] && [ -n "$vid" ] || {
 				cat <<EOF
-Adding FH device requires IFACE, VID and bridge
+Adding FH device requires IFACE and VID.
 EOF
 				exit 1
 			}

 			# create vlan device
-			set_wireless_bridge $iface $bridge
-			vlan_dev=$(_create_vlan_dev $iface $vid $bridge)
+			vlan_dev=$(_create_vlan_dev $iface $vid)

 			# add rules
 			# Note: removing these for now since these packets are read directly from the iface anyway
@@ -139,15 +103,12 @@ EOF
 					exit 1
 					;;
 			esac
-
-			set_wireless_bridge $iface $bridge
 		}

 		ts_create_bh_drv() {
 			iface=$1				# bh iface
 			vid=$2					# primary vid
 			profile=$3				# agent profile (1 or 2)
-			bridge=$4				# bridge interface should be connected to

 			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
 				cat <<EOF
@@ -156,14 +117,6 @@ EOF
 				exit 1
 			}

-			[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
-
-			old_vid=$(wl -i $1 map_8021q_settings)
-			old_vid=${old_vid##* }
-			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
-
-			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
-
 			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
 			wl -i $iface down &> /dev/null
 			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
@@ -172,6 +125,20 @@ EOF
 		}

 		ts_create_eth() {
+
+			_ts_setup() {
+				vlan_bridge=$1
+				lan_bridge=$2
+				vlan_dev=$3
+				lan_dev=${vlan_dev}_lan
+
+				ip link show $vlan_dev &> /dev/null || ip link add $vlan_dev type veth peer name $lan_dev
+				brctl addif $vlan_bridge $vlan_dev &> /dev/null
+				brctl addif $lan_bridge $lan_dev &> /dev/null
+				ip link set $vlan_dev up
+				ip link set $lan_dev up
+			}
+
 			iface=$1				# Multi-AP Logical Ethernet Interface
 			vid=$2					# primary vid
 			pbits=$3				# default pbits to apply
@@ -185,52 +152,25 @@ EOF
 				exit 1
 			}

-			ip link set lei down
-			ip link set lei_map down
+			# create virtual eth device between bridges (if it doesn't exist))
+			_ts_setup $vlan_bridge $lan_bridge $iface

-			old_bridge="$(_get_bridge lei_lan)"
-			[ -n "$old_bridge" ] && brctl delif $old_bridge lei_lan &> /dev/null
+			# create vlan device
+			vlan_dev=$(_create_vlan_dev $iface $vid)

-			ip link show lei_lan || ip link del lei_lan
-			ip link add link lei name lei_lan type vlan id ${vid}
+			# TODO: how to disable returning traffic back to incoming interface?

-			brctl addif ${lan_bridge} lei_lan &>/dev/null
-			brctl addif ${vlan_bridge} lei_map &>/dev/null
-
-			ip link set lei up
-			ip link set lei_map up
-			ip link set lei_lan up
+			# add rules
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
 		}

 		ts_create_dhcp() {
-			local diff=""
-
-                        _net_setup() {
-				local name=$1
-				local devname=$2
-				local vid=$3
-
-				[ -z "$(uci -q get network.${name})" ] && {
-					uci -q set network.${name}="interface"
-					uci -q set network.${name}.device="$devname"
-					uci -q set network.${name}.is_lan="1"
-					uci -q set network.${name}.proto="static"
-					# TODO vid > 255
-					local ip_addr="192.168.${vid}.1"
-					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
-					uci -q set network.${name}.ipaddr="${ip_addr}"
-					uci -q set network.${name}.netmask="255.255.255.0"
-
-					diff="1"
-				}
-
-				[ "$diff" = "1" ] && uci -q commit network
-			}
-
 			_br_setup() {
 				local name=$1
 				local sinkname=$2
 				local vid=$3
+				local diff=""

 				[ -z "$(uci -q get network.${name}_dev)" ] && {
 					uci -q set network.${name}_dev="device"
@@ -253,7 +193,11 @@ EOF
 					diff="1"
 				}

-				[ "$diff" = "1" ] && uci -q commit network
+				[ "$diff" = "1" ] && {
+					uci -q commit network
+					ubus call network reload
+					ubus -t 5 wait_for network.device
+				}
 			}

 			_dhcp_setup() {
@@ -273,44 +217,43 @@ EOF
 				uci -q add_list dhcp.${name}.ra_flags="managed-config"
 				uci -q add_list dhcp.${name}.ra_flags="other-config"

-				diff="1"
 				uci -q commit dhcp
+				ubus call uci commit '{"config":"dhcp"}'
 			}

-			_firewall_setup() {
+			_wan_setup() {
 				local name=$1
-				local network=$2
-				local zone_exist=0

 				config_load firewall

 				_process_zone() {
 					local section=$1
-					local new_name=$2
+					local sink=$2
 					local name
+					local exists=false

 					config_get name $section name

-					[ "$name" == "$new_name" ] && zone_exist=1
+					[ "$name" == "lan" ] || return
+
+					_process_list() {
+						local value=$1
+
+						[ "$value" == "$sink" ] && exists=true && return 1
+					}
+
+					config_list_foreach "$section" network _process_list 
+
+					[ $exists = false ] && {
+						uci -q add_list firewall.${section}.network="${sink}"
+						uci -q commit firewall
+						ubus call uci commit '{"config":"firewall"}'
+					}
+
+					return 1
 				}

 				config_foreach _process_zone zone $name
-
-				[ "$zone_exist" != "0" ] && return
-
-				uci -q add firewall zone
-				uci -q set firewall.@zone[-1].name="$name"
-				uci -q add_list firewall.@zone[-1].network="$network"
-				uci -q set firewall.@zone[-1].input='ACCEPT'
-				uci -q set firewall.@zone[-1].output='ACCEPT'
-				uci -q set firewall.@zone[-1].forward='ACCEPT'
-
-				uci -q add firewall forwarding
-				uci -q set firewall.@forwarding[-1].src="$name"
-				uci -q set firewall.@forwarding[-1].dest="wan"
-
-				diff="1"
-				uci -q commit firewall
 			}

 			vid=$1					# primary vid
@@ -322,26 +265,20 @@ EOF
 				exit 1
 			}

-			ip link show sink${vid} || {
-				ip link add sink${vid} type veth peer name sink${vid}_vlan
-				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
-			}
+			br_dev=sink_vlan${vid}			# name of vlan device to create

-			ip link set sink${vid} up
-			ip link set sink${vid}_peer up
-			ip link set sink${vid}_vlan up

-			diff=""
-			_net_setup sink${vid} sink${vid}_peer ${vid}
-			_dhcp_setup sink${vid}
-			_firewall_setup lan${vid} sink${vid}
+			ip l a sink1_vlan${vid} type veth peer name sink2_vlan${vid}
+			vlanctl --mcast --if-create-name sink2_vlan${vid} sink3_vlan${vid} --if sink2_vlan${vid} --set-if-mode-rg
+			vlanctl --if sink2_vlan${vid} --rx --tags 1 --filter-vid ${vid} 0 --set-rxif sink3_vlan${vid} --pop-tag --rule-append
+			vlanctl --if sink2_vlan${vid} --tx --tags 0 --filter-txif sink3_vlan${vid} --push-tag --set-vid ${vid} 0 --rule-append
+			ip l s sink1_vlan${vid} up
+			ip l s sink2_vlan${vid} up
+			ip l s sink3_vlan${vid} up

-			[ "$diff" = "1" ] && {
-				ubus call network reload
-				ubus -t 5 wait_for network.interface.sink${vid}
-			}
-
-			brctl addif br-map sink${vid}_vlan &> /dev/null
+			_br_setup $br_dev sink3_vlan${vid} $vid
+			_dhcp_setup $br_dev
+			_wan_setup $br_dev
 		}

 	local type=$1
@@ -363,15 +300,12 @@ EOF

 		path=$(ls -d /sys/class/net/${iface}/upper_*)
 		[ -z "$path" ] && exit 0
-
 		vlan_dev=${path##*upper_}
 		bridge="$(_get_bridge $vlan_dev)"

-		[ -n "$bridge" ] && {
-			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
-			brctl addif $bridge $iface &> /dev/null # needed to add again
-                }
+		vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge

+		brctl addif $bridge $iface &> /dev/null
 	}

 	ts_populate() {
@@ -393,8 +327,8 @@ EOF
 		vlan_dev=${path##*upper_}

 		# add rules
-		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
-		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
+		vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
+		vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
 	}

 	ts_primary() {
@@ -431,50 +365,16 @@ EOF
 		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
 	}

-	ts_reload() {
-		local dhcp_reload=$1
-
-		# workaround for missing backhaul wifi.ap.* ubus obj's:
-		# iterate in config and setup bh
-		config_load wireless
-
-		_setup_bh_iface() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
-
-			config_get ifname $sec ifname
-
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
-				ts_create bh $ifname 1 2 br-map
-			}
-		}
-
-		config_foreach _setup_bh_iface wifi-iface
-
-		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
-
-		# another workaround for netif? removed
-		# sink devices for br-map bridge
-		for sink in $(ubus list network.interface.sink*) ; do
-			local sink_vlan=${sink/network.interface./}_vlan
-			brctl addif br-map $sink_vlan &> /dev/null
-		done
-	}
-
 	local func=$1
 	shift

 	case "$func" in
-		create) dbg "create $@"; ts_create $@;;
-		delete) dbg "delete $@"; ts_delete $@;;
-		populate) dbg "populate $@"; ts_populate $@;;
-		primary) dbg "primary $@"; ts_primary $@;;
-		unicast) dbg "unicast $@"; ts_unicast $@;;
-		multicast) dbg "multicast $@"; ts_multicast $@;;
-		reload) dbg "reload $@"; ts_reload $@;;
+		create) ts_create $@;;
+		delete) ts_delete $@;;
+		populate) ts_populate $@;;
+		primary) ts_primary $@;;
+		unicast) ts_unicast $@;;
+		multicast) ts_multicast $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;
 	esac
--- a/map-controller/Makefile
+++ b/map-controller/Makefile
@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=map-controller
-PKG_VERSION:=6.0.0
+PKG_VERSION:=5.4.5
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=4d8e171fabc16ee93bbad8d4a7471f8968836217
+PKG_SOURCE_VERSION:=99ef60cc1ef7c00706cd1053c17d8f6a429f52d4

 PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
--- a/map-topology/Makefile
+++ b/map-topology/Makefile
@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk

 PKG_NAME:=map-topology
-PKG_VERSION:=3.2.2
+PKG_VERSION:=3.2.0

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=76767466f3dbd2a697fa4cdd966f4dd2ce4f43c8
+PKG_SOURCE_VERSION:=d1fae1ff7a8bc8daea08799b9ffbdeb424903e54
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
--- a/mqtt-ciotc/Makefile
+++ b/mqtt-ciotc/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2020 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=mqtt-ciotc
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=Apache-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/mqtt-ciotc
+	CATEGORY:=Utilities
+	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
+	TITLE:=mqtt google iot clinet
+endef
+
+define Package/mqtt-ciotc/description
+	mqtt google iot client
+endef
+
+define Package/mqtt-ciotc/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,mqtt-ciotc))
--- a/mqtt-ciotc/files/etc/config/mqtt_ciotc
+++ b/mqtt-ciotc/files/etc/config/mqtt_ciotc
@@ -0,0 +1,3 @@
+config certs 'certs'
+	option private '/etc/mqtt-ciotc/rsa_private.pem'
+	option root '/etc/mqtt-ciotc/roots.pem'
--- a/mqtt-ciotc/files/etc/init.d/mqtt_ciotc
+++ b/mqtt-ciotc/files/etc/init.d/mqtt_ciotc
@@ -0,0 +1,35 @@
+#!/bin/sh /etc/rc.common
+
+START=96
+STOP=10
+PROG=/sbin/mqtt_ciotc
+
+USE_PROCD=1
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	config_load mqtt_ciotc
+	config_get private certs private
+	config_get root certs root
+
+	[ -n $private ] && procd_append_param command --private-cert $private
+	[ -n $root ] && procd_append_param command --root-cert $root
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service()
+{
+	service_stop ${PROG}
+}
+
+reload_service() {
+#	procd_send_signal wifilife # use SIGHUP
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger "mqtt_ciotc"
+}
--- a/netmode/Makefile
+++ b/netmode/Makefile
@@ -8,26 +8,35 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=netmode
-PKG_VERSION:=0.3.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
+PKG_VERSION:=0.2.0
+
+PKG_SOURCE_VERSION:=5c8abbdf86e4651c7c6f14f784cfb52e69979f96
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
 include $(INCLUDE_DIR)/package.mk

 define Package/netmode
-  CATEGORY:=Utilities
-  TITLE:=Network Modes and Utils
+	CATEGORY:=Base system
+	DEPENDS:=+fping +ubus +libubox +libuci
+	TITLE:=Predefined Network Modes
 endef

 define Package/netmode/description
-	Network Modes and Utils
-endef
-
-define Build/Compile
+	Predefined Network Modes
 endef

 define Package/netmode/install
 	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netmoded $(1)/sbin/
 endef

 $(eval $(call BuildPackage,netmode))
--- a/netmode/files/etc/config/netmode
+++ b/netmode/files/etc/config/netmode
@@ -1,10 +1,8 @@
-config netmode global
-	option enabled 0
+config netmoded 'netmoded'
+	option enabled '0'
+
+config setup 'setup'
+	option enabled '0'
+        option dir '/etc/netmodes'
 #	option mode 'router'

-#config testnet testnet
-#	option enabled 1
-#	option destination '8.8.8.8'
-	
-#config shiftrange shiftrange
-#	option enabled 1
--- a/netmode/files/etc/hotplug.d/iface/05-testnet
+++ b/netmode/files/etc/hotplug.d/iface/05-testnet
@@ -1,16 +1,16 @@
 #!/bin/sh

-# do not start testnet if the feature is explicitly disabled
-[ "$(uci -q get netmode.testnet.enabled)" = "0" ] && exit 0
-
 [ "$ACTION" == "ifup" -o "$ACTION" == "ifdown" ] || exit 0

 interface_check() {
-	[ "$(uci -q get network.$INTERFACE.is_lan)" = "1" ] && exit 0
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0

-	[ "$(uci -q get network.$INTERFACE.proto)" = "none" ] && exit 0
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0

-	[ "$(uci -q get network.$INTERFACE.defaultroute)" = "0" ] && exit 0
+	local defroute="$(uci -q get network.$INTERFACE.defaultroute)"
+	[ "$defroute" == "0" ] && exit 0
 }

 interface_check
@@ -19,3 +19,4 @@ if [ -n "$(pgrep -f testnet)" ]; then
 else
 	testnet &
 fi
+
--- a/netmode/files/etc/hotplug.d/iface/70-shiftrange
+++ b/netmode/files/etc/hotplug.d/iface/70-shiftrange
@@ -2,9 +2,6 @@
 # this scripts shifts the lan network prefixes
 # if a wan interface has the same network prefix.

-# do not shift range if the feature is explicitly disabled
-[ "$(uci -q get netmode.shiftrange.enabled)" == "0" ] && exit 0
-
 . /lib/functions.sh
 . /lib/functions/network.sh

--- a/netmode/files/etc/init.d/netmode
+++ b/netmode/files/etc/init.d/netmode
@@ -3,71 +3,44 @@
 START=10
 USE_PROCD=1

+NETMODED="/sbin/netmoded"
+
 . /lib/functions.sh
+. /lib/functions/netmode.sh

-MODEDIR="/etc/netmodes"
+start_netmoded() {
+	config_load netmode

-libnetmode_exec() {
-	when="$1"
-	# Execute /lib/netmode scripts
-	if [ -d /lib/netmode/$when ]; then
-		logger -s -p user.info -t "netmode" "Executing /lib/netmode/$when scripts"
-		for script in $(ls /lib/netmode/$when/); do
-			sh /lib/netmode/$when/$script
-		done
+        config_get enabled netmoded enabled 0
+        if [ "$enabled" != "1" ]; then
+		return
 	fi
+
+	procd_open_instance
+	procd_set_param command $NETMODED
+
+	procd_append_param command --verbose warning -i macaddr
+	procd_set_param stdout 1
+	procd_set_param stderr 1
+
+	procd_set_param respawn
+	procd_close_instance
 }

 start_service() {
-	[ -f /etc/config/netmode ] || return
+	populate_netmodes

-	config_load netmode
+	start_netmoded
+}

-	config_get_bool enabled global enabled '0'
-	[ $enabled -eq 0 ] && return
+reload_service() {
+        switch_netmode

-	# Get the desired netmode from config
-	config_get mode global mode
-	# Check if netmode is set as boot environment parameter
-	[ -n "$mode" ] || mode="$(fw_printenv -n netmode 2>/dev/null)"
-	# Return if mode is not set
-	[ -n "$mode" ] || return
-
-	# Get the last saved mode
-	lastmode="$(cat /etc/netmodes/.last_mode 2>/dev/null)"
-	# Return if desired mode is same as last saved mode
-	[ "$mode" == "$lastmode" ] && return
-
-	# Save mode as last mode
-	echo "$mode" > /etc/netmodes/.last_mode
-
-	logger -s -p user.info -t "netmode" "Switching to $mode Mode" >/dev/console
-
-	# Execute netmode generic pre-mode-switch scripts
-	libnetmode_exec "pre"
-
-	# Copy netmode UCI config files
-	if [ -d $MODEDIR/$mode/uci ]; then
-		logger -s -p user.info -t "netmode" "Copying $MODEDIR/$mode/uci/* to /etc/config/"
-		cp $MODEDIR/$mode/uci/* /etc/config/ 2>/dev/null
-	fi
-
-	# Execute netmode generic scripts
-	libnetmode_exec
-
-	# Execute mode specific scripts
-	if [ -d $MODEDIR/$mode/scripts ]; then
-		logger -s -p user.info -t "netmode" "Executing $MODEDIR/$mode/scripts/* scripts"
-		for script in $(ls $MODEDIR/$mode/scripts/); do
-			sh $MODEDIR/$mode/scripts/$script
-		done
-	fi
-
-	# Execute netmode generic post-mode-switch scripts
-	libnetmode_exec "post"
+	start_netmoded
 }

 service_triggers()
 {
 	procd_add_reload_trigger netmode
 }
+
--- a/netmode/files/etc/netmodes/bridge/DETAILS
+++ b/netmode/files/etc/netmodes/bridge/DETAILS
@@ -0,0 +1,9 @@
+{
+	"description": [
+		{ "en" : "Bridge Mode" }
+	],
+	"explanation": [
+		{ "en" : "NAT is disabled." }
+	],
+	"reboot" : 0
+}
--- a/netmode/files/etc/netmodes/bridge/scripts/pre/bridge_mode.sh
+++ b/netmode/files/etc/netmodes/bridge/scripts/pre/bridge_mode.sh
@@ -0,0 +1,92 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+BRIDGEPORTS=""
+
+get_vlan() {
+	local device="$1"
+	for section in $(uci show network | grep "=device" | cut -d '=' -f1); do
+		if [ "$(uci -q get $section.ifname)" == "$device" ]; then
+			uci -q get $section.name
+			break
+		fi
+	done
+}
+
+add_wifi_devs()
+{
+
+	add_wdev()
+	{
+		local cfg=$1
+#		local disabled
+
+#		config_get_bool disabled $cfg disabled 0
+#		config_get_bool ifname $cfg ifname
+	
+#		if [ $disabled -eq 0 -a -n "$ifname" ]; then
+#			BRIDGEPORTS="$ifname"
+#		fi
+
+		uci -q set wireless.$cfg.network="wan"
+	}
+
+	config_load wireless
+	config_foreach add_wdev "wifi-iface"
+
+	uci -q commit wireless
+}
+
+add_xtm_devs() {
+	local section device vlan
+
+	for section in $(uci show dsl | grep "=.*tm-device" | cut -d'=' -f1); do
+		if [ -n "$(uci -q get $section.device)" ]; then
+
+			vlan="$(get_vlan $device)"
+			[ -n "$vlan" ] && device="$vlan"
+		
+			if [ -n "$device" ]; then
+				BRIDGEPORTS="$BRIDGEPORTS $device"
+			fi
+
+		fi
+	done
+}
+
+add_eth_ports() {
+
+	add_port()
+	{
+		local cfg=$1
+		local ifname vlan
+
+		config_get ifname $cfg ifname
+
+		vlan="$(get_vlan $ifname)"
+		[ -n "$vlan" ] && ifname="$vlan"
+	
+		if [ -n "$ifname" ]; then
+			BRIDGEPORTS="$BRIDGEPORTS $ifname"
+		fi
+	}
+
+	config_load ports
+	config_foreach add_port "ethport"
+}
+
+add_xtm_devs
+add_eth_ports
+add_wifi_devs
+
+BRIDGEPORTS="$(echo $BRIDGEPORTS | sed -e 's/[[:space:]]*$//')"
+
+uci -q set network.wan.type="bridge"
+uci -q set network.wan.ifname="$BRIDGEPORTS"
+uci -q set network.wan6.ifname="@wan"
+uci -q delete network.lan.ifname
+
+ubus call uci commit '{"config":"network"}'
+
--- a/netmode/files/etc/netmodes/router/DETAILS
+++ b/netmode/files/etc/netmodes/router/DETAILS
@@ -0,0 +1,9 @@
+{
+	"description": [
+		{ "en" : "Router Mode" }
+	],
+	"explanation": [
+		{ "en" : "NAT is enabled." }
+	],
+	"reboot" : 0
+}
--- a/netmode/files/etc/netmodes/router/scripts/pre/router_mode.sh
+++ b/netmode/files/etc/netmodes/router/scripts/pre/router_mode.sh
@@ -0,0 +1,94 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+WANPORTS=""
+LANPORTS=""
+
+get_vlan() {
+	local device="$1"
+	for section in $(uci show network | grep "=device" | cut -d '=' -f1); do
+		if [ "$(uci -q get $section.ifname)" == "$device" ]; then
+			uci -q get $section.name
+			break
+		fi
+	done
+}
+
+add_wifi_devs()
+{
+
+	add_wdev()
+	{
+		local cfg=$1
+
+		config_get mode $cfg mode "ap"
+
+		if [ "$mode" == "ap" ]; then
+			uci -q set wireless.$cfg.network="lan"
+		fi
+	}
+
+	config_load wireless
+	config_foreach add_wdev "wifi-iface"
+
+	uci -q commit wireless
+}
+
+add_xtm_devs() {
+	local section device vlan
+
+	for section in $(uci show dsl | grep "=.*tm-device" | cut -d'=' -f1); do
+		device="$(uci -q get $section.device)"
+
+		if [ -n "$device" ]; then
+			vlan="$(get_vlan $device)"
+			[ -n "$vlan" ] && device="$vlan"
+
+			if [ -n "$device" ]; then
+				WANPORTS="$WANPORTS $device"
+			fi
+		fi
+	done
+}
+
+add_eth_ports() {
+
+	add_port()
+	{
+		local cfg=$1
+		local uplink ifname vlan
+
+		config_get ifname $cfg ifname
+		config_get_bool uplink $cfg uplink 0
+	
+		vlan="$(get_vlan $ifname)"
+		[ -n "$vlan" ] && ifname="$vlan"
+
+		if [ $uplink -eq 1 ]; then
+			WANPORTS="$WANPORTS $ifname"
+		else
+			LANPORTS="$LANPORTS $ifname"
+		fi
+	}
+
+	config_load ports
+	config_foreach add_port "ethport"
+}
+
+add_xtm_devs
+add_eth_ports
+add_wifi_devs
+
+WANPORTS="$(echo $WANPORTS | sed -e 's/[[:space:]]*$//')"
+LANPORTS="$(echo $LANPORTS | sed -e 's/[[:space:]]*$//')"
+
+uci -q set network.wan.type="anywan"
+uci -q set network.wan.ifname="$WANPORTS"
+uci -q set network.wan6.ifname="@wan"
+uci -q set network.lan.type="bridge"
+uci -q set network.lan.ifname="$LANPORTS"
+
+ubus call uci commit '{"config":"network"}'
+
--- a/netmode/files/etc/uci-defaults/998-netmode-opreqs
+++ b/netmode/files/etc/uci-defaults/998-netmode-opreqs
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+add_owsd_ubusproxy_object_netmode() {
+	local netmd=$(uci -q get owsd.ubusproxy.object | grep netmode)
+	if [ -z "$netmd" ]; then
+		uci -q add_list owsd.ubusproxy.object="netmode"
+		uci commit owsd
+	fi
+}
+
+add_owsd_ubusproxy_object_netmode
--- a/netmode/files/lib/functions/netmode.sh
+++ b/netmode/files/lib/functions/netmode.sh
@@ -0,0 +1,150 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+MODEDIR=$(uci -q get netmode.setup.dir)
+
+[ -n "$MODEDIR" ] || MODEDIR="/etc/netmodes"
+
+run_netmode_scripts() {
+	local mode=$1
+	local when=$2
+	local script
+	local path
+
+	path=$(readlink -f /etc/netmodes/$mode/)
+	[ "${path:0:14}" == "/etc/netmodes/" ] || exit
+
+	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
+		logger -s -p user.info -t "netmode" "Executing $when netmode scripts" >/dev/console
+		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
+			sh /etc/netmodes/$mode/scripts/$when/$script
+		done
+	fi
+}
+
+switch_netmode() {
+	[ -f /etc/config/netmode -a -d $MODEDIR ] || return
+
+	config_load netmode
+
+	local enabled
+	config_get_bool enabled setup enabled '0'
+	[ $enabled -eq 0 ] && return 
+
+	local mode
+	config_get mode setup mode
+
+	[ -d "/etc/netmodes/$mode" ] || return
+
+	logger -s -p user.info -t "netmode" "Switching to $mode Mode" >/dev/console
+
+	run_netmode_scripts $mode "pre"
+
+	local reboot=$(uci -q get netmode.$mode.reboot)
+
+	if [ "$reboot" == "1" ]; then
+		#run_netmode_scripts $mode "post"
+		reboot &
+		exit
+	fi
+
+	#run_netmode_scripts $mode "post"
+}
+
+populate_netmodes() {
+	[ -f /etc/config/netmode -a -d $MODEDIR ] || return
+
+	config_load netmode
+
+	local enabled
+	config_get_bool enabled setup enabled '0'
+	[ $enabled -eq 0 ] && return 
+
+	delete_netmode() {
+		uci delete netmode.$1
+	}
+
+	config_foreach delete_netmode netmode
+	uci commit netmode
+
+	local hardware=$(db -q get hw.board.model_name)
+	local keys lang desc exp exclude support
+	for mode in $(ls $MODEDIR); do
+			lang=""
+			desc=""
+			exp=""
+			uci -q set netmode.$mode=netmode
+			json_load "$(cat $MODEDIR/$mode/DETAILS)"
+
+			if json_select excluded_boards; then
+				exclude=0
+				_i=1
+				while json_get_var board $_i; do
+					case "$hardware" in
+						$board)
+							uci -q delete netmode.$mode
+							exclude=1
+							break
+						;;
+					esac
+					_i=$((_i+1))
+				done
+				json_select ..
+				[ $exclude -eq 1 ] && continue
+			elif json_select supported_boards; then
+				support=0
+				_i=1
+				while json_get_var board $_i; do
+					case "$hardware" in
+						$board)
+							support=1
+							break
+						;;
+					esac
+					_i=$((_i+1))
+				done
+				json_select ..
+				[ $support -eq 1 ] || {
+					uci -q delete netmode.$mode
+					continue
+				}
+			fi
+
+			json_select description
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var desc $lang
+				uci -q set netmode.$mode."desc_$lang"="$desc"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
+				json_select ..
+			done
+			json_select ..
+
+			json_select explanation
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var exp $lang
+				uci -q set netmode.$mode."exp_$lang"="$exp"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
+				json_select ..
+			done
+			json_select ..
+
+			json_get_var cred credentials
+			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var ulb uplink_band
+			uci -q set netmode.$mode.uplink_band="$ulb"
+			json_get_var reboot reboot
+			uci -q set netmode.$mode.reboot="$reboot"
+	done
+
+	uci commit netmode
+}
--- a/netmode/files/sbin/testnet
+++ b/netmode/files/sbin/testnet
@@ -31,10 +31,7 @@ test_connection() {
 internet_test() {
 	local link dest

-	# use the destination address given in config for connectivity check
-	dest="$(uci -q get netmode.testnet.destination)"
-	# for backwards compatibility
-	[ -n "$dest" ] || dest="$(uci -q get diagnostics.@connectivity[0].destination)"
+	dest="$(uci -q get diagnostics.@connectivity[0].destination)"

 	test_connection $dest

--- a/obuspa/Config.in
+++ b/obuspa/Config.in
@@ -2,24 +2,16 @@ if PACKAGE_obuspa

 menu "Configuration"

-config OBUSPA_DB_PATH
-	string "Configure path for usp.db file"
-	default "/tmp/"
-
-config OBUSPA_MTP_ENABLE_MQTT
-	bool "Enable MQTT as mtp protocol"
-	default y
-
-config OBUSPA_MTP_ENABLE_WEBSOCKETS
-	bool "Enable WebSockets as mtp protocol"
-	default y
-
 config OBUSPA_MTP_ENABLE_STOMP
 	bool "Enable STOMP as mtp protocol"
 	default y

+config OBUSPA_MTP_ENABLE_MQTT
+	bool "Enable MQTT as mtp protocol"
+	default y
+
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
-	default n
+	default y
 endmenu
 endif
--- a/obuspa/Makefile
+++ b/obuspa/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=obuspa
-PKG_VERSION:=5.0.0.2
+PKG_VERSION:=4.1.0.18

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0afaf5eeed63dceb275d7715ccce8977cfad1ee3
+PKG_SOURCE_VERSION:=af3d4663d66942e3b0e3253375c5620629769aa5
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -31,7 +31,7 @@ define Package/obuspa
  CATEGORY:=Utilities
  SUBMENU:=TRx69
  TITLE:=USP agent
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto-ssl +libwebsockets-openssl
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto
 endef

 define Package/obuspa/description
@@ -44,14 +44,7 @@ endef

 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-	-Wall \
-	-Werror
-
-ifneq ($(CONFIG_OBUSPA_DB_PATH),)
-  CONFIGURE_ARGS += \
-	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
-endif
+	-D_GNU_SOURCE

 ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_STOMP),y)
  CONFIGURE_ARGS += \
@@ -77,14 +70,6 @@ else
 	--disable-coap
 endif

-ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_WEBSOCKETS),y)
-  CONFIGURE_ARGS += \
-	--enable-websockets
-else
-  CONFIGURE_ARGS += \
-	--disable-websockets
-endif
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
        $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/
--- a/obuspa/files/etc/init.d/obuspa
+++ b/obuspa/files/etc/init.d/obuspa
@@ -31,7 +31,7 @@ cleanup() {
 trap cleanup EXIT

 log() {
-	echo "$*"|logger -t obuspa.init -p debug
+	echo "${@}"|logger -t obuspa.init -p debug
 }

 db_set() {
@@ -49,8 +49,9 @@ update_keep() {
 		return;
 	fi

-	if grep -q "${keep_file}" ${KEEP_FILES}; then
-		echo "${keep_file}" >> ${KEEP_FILES}
+	grep -q "${keep_file}" ${KEEP_FILES}
+	if [ "$?" -ne 0 ]; then
+		echo ${keep_file} >> ${KEEP_FILES}
 	fi
 }

@@ -62,12 +63,11 @@ get_index() {
 }

 get_role_index_from_json() {
-	local role="$*"
+	local role="${@}"
 	local num=0
-	local roles_obj

 	# In case of role is empty or file not present
-	if [ -z "${role}" ] || [ ! -f "${role_def_file}" ]; then
+	if [ -z "${role}" -o ! -f "${role_def_file}" ]; then
 		return 0
 	fi

@@ -79,11 +79,11 @@ get_role_index_from_json() {

 	for k in ${roles_obj}; do
 		local rname
-		json_select "$k"
+		json_select $k
 		json_get_var rname name
 		json_select ..

-		if [ "${rname}" != "Untrusted" ] && [ "${rname}" != "full_access" ]; then
+		if [ "${rname}" != "Untrusted" -a "${rname}" != "full_access" ]; then
 			num=$(( num + 1 ))
 		fi

@@ -102,10 +102,10 @@ get_uci_ref_index() {

 	index=0
 	config_load $CONFIGURATION
-	config_foreach get_index "$1" "$2"
+	config_foreach get_index $1 $2
 	val=$(cat ${USP_TEMP_FILE})

-	if [ -z "${val}" ]; then
+	if [ -z $val ]; then
 		val=0
 	fi

@@ -121,7 +121,7 @@ validate_obuspa_section()
 		'trust_cert:file' \
 		'client_cert:file' \
 		'interface:string' \
-		'ifname:string' \
+		'ifname:string:br-lan' \
 		'debug:bool:false' \
 		'prototrace:bool:false' \
 		'log_level:uinteger' \
@@ -224,11 +224,16 @@ validate_mqtt_client_section()
 }

 get_oui_from_db() {
-	db -q get device.deviceinfo.ManufacturerOUI
+	local oui="$(db get device.deviceinfo.ManufacturerOUI)"
+
+	echo "${oui}"
 }

 get_serial_from_db() {
-	db -q get device.deviceinfo.SerialNumber
+	local serial="$(db get device.deviceinfo.SerialNumber)"
+
+	# this can encoded further
+	echo "${serial}"
 }

 publish_endpoint() {
@@ -236,7 +241,7 @@ publish_endpoint() {
 	local opt=""

 	# return if mosquitto_pub is not present
-	if [ ! "$(command -v mosquitto_pub)" ]; then
+	if [ ! "$(which mosquitto_pub)" ]; then
 		log "mosquitto_pub not present can't publish EndpointID"
 		return 0;
 	fi
@@ -290,26 +295,26 @@ configure_controller() {
 		return 1;
 	}

-	if [ -z "${EndpointID}" ] || [ -z "${Protocol}" ]; then
+	if [ -z "${EndpointID}" -o -z "${Protocol}" ]; then
 		log "controller:: EndpointID id and Protocol cannot be empty"
 		return 1;
 	fi

-	if [ -z "${stomp}" ] && [ -z "${Reference}" ] && [ -z "${mqtt}" ] && [ -z "${coap_path}" ]; then
+	if [ -z "${stomp}" -a -z "${Reference}"  -a -z "${mqtt}" -a -z "${coap_path}" ]; then
 		log "controller:: Invalid configuration"
 		return 1;
 	fi

 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp "${stomp}")
+			val=$(get_uci_ref_index stomp ${stomp})
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred stomp section"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt "${mqtt}")
+			val=$(get_uci_ref_index mqtt ${mqtt})
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred mqtt section"
 				return 1;
@@ -327,7 +332,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 	else
 		if [ -n "${assigned_role_name}" ]; then
-			AssignedRole=$(get_role_index "${assigned_role_name}")
+			AssignedRole=$(get_role_index ${assigned_role_name})
 			db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 		fi
 	fi
@@ -368,7 +373,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Alias "cpe-${_pnum}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Enable "${Enable}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.ParameterName "${param}"
-		_pnum=$(( _pnum + 1 ))
+		_pnum=$(( ${_pnum} + 1 ))
 	done

 	db_set
@@ -383,12 +388,12 @@ configure_subscription(){
 		return 1;
 	}

-	if [ -z "${Recipient}" ] && [ -z "${controller}" ]; then
+	if [ -z "${Recipient}" -a -z "${controller}" ]; then
 		log "No recipient for subscription"
 	fi

 	if [ -z "${Recipient}" ]; then
-		val=$(get_uci_ref_index controller "${controller}")
+		val=$(get_uci_ref_index controller ${controller})
 		if [ "${val}" -eq 0 ]; then
 			log "Not able to find the referred controller section"
 				return 1;
@@ -425,7 +430,8 @@ check_json_load()
 	local ret=0
 	if [ -f "${role_def_file}" ]; then
 		json_init
-		if json_load_file "${role_def_file}" 2>&1 |grep -q Failed; then
+		json_load_file "${role_def_file}" 2>&1 |grep -q Failed
+		if [ $? -eq 0 ]; then # In case of invalid json file
 			log "failed to load [${role_def_file}]"
 			ret=1
 		fi
@@ -437,7 +443,7 @@ check_json_load()
 get_role_index() {
 	local role="Device.LocalAgent.ControllerTrust.Role"
 	local idx=0
-	local role_name="$*"
+	local role_name="${@}"

 	case "${role_name}" in
 	'full_access')
@@ -449,9 +455,10 @@ get_role_index() {
 	 *)
 		local ji=0

-		ji=$(check_json_load)
-		if [ "${ji}" -eq 0 ]; then
-			get_role_index_from_json "${role_name}"
+		check_json_load
+		if [ $? -eq 0 ]; then
+			get_role_index_from_json ${role_name}
+			ji=$?
 		fi
 		idx=$(( ji + 2 )) # Add predefined roles
 	 esac
@@ -467,7 +474,7 @@ configure_challenges() {
 		exit 1;
 	}

-	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
+	if [ -z "${role_name}" -a -z "${Role}" ]; then
 		log "Either role_name or Role must defined for a challenge";
 		return 1;
 	fi
@@ -480,10 +487,10 @@ configure_challenges() {
 	fi

 	if [ -z "${Role}" ]; then
-		Role=$(get_role_index "${role_name}")
+		Role=$(get_role_index ${role_name})
 	fi

-	if [ -z "${Alias}" ] && [ -n "${role_name}" ]; then
+	if [ -z "${Alias}" -a -n "${role_name}" ]; then
 		Alias=${role_name}
 	fi

@@ -505,14 +512,14 @@ configure_mtp() {

 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp "${stomp}")
+			val=$(get_uci_ref_index stomp ${stomp})
 			if [ "${val}" -eq 0 ]; then
 				log "Referred stomp section not found"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt "${mqtt}")
+			val=$(get_uci_ref_index mqtt ${mqtt})
 			if [ "${val}" -eq 0 ]; then
 				log "Referred mqtt section not found"
 				return 1;
@@ -576,7 +583,7 @@ configure_stomp_connection() {

 configure_mqtt_client(){
 	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion KeepAliveTime
-	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier ClientID
+	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier

 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
@@ -610,7 +617,6 @@ configure_mqtt_client(){

 configure_obuspa() {
 	local enabled trust_cert ifname interface debug prototrace log_level db_file log_dest role_file
-	local client_cert

 	validate_obuspa_section "global" || {
 		log "Validation of global section failed"
@@ -626,59 +632,56 @@ configure_obuspa() {
 		procd_set_param stderr 1
 	fi

-	if [ "${debug}" -eq 1 ] && [ "${prototrace}" -eq 1 ]; then
+	if [ "${debug}" -eq 1 -a "${prototrace}" -eq 1 ]; then
 		procd_append_param command -p
 	fi

-	if [ "${debug}" -eq 1 ] && [ -n "${log_level}" ]; then
-		procd_append_param command -v "${log_level}"
+	if [ "${debug}" -eq 1 -a -n "${log_level}" ]; then
+		procd_append_param command -v ${log_level}
 	fi

 	if [ -n "${log_dest}" ]; then
-		procd_append_param command -l "${log_dest}"
+		procd_append_param command -l ${log_dest}
 	fi

 	if [ -n "${interface}" ]; then
-		network_get_physdev ifname "${interface}"
+		network_get_physdev ifname ${interface}
 	fi

-	if [ -n "${ifname}" ]; then
-		procd_set_param env USP_BOARD_IFNAME="${ifname}"
-		# Set this variable for root user and obuspa -c tool
-		if [ -f "${PROFILE}" ]; then
-			if grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}; then
-				if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
-					sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
-				fi
-			fi
-		fi
-		echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
-	else
-		if [ -f "$PROFILE" ]; then
-			if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
+	# Set this variable for root user and obuspa -c tool
+	if [ -f "${PROFILE}" ]; then
+		grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}
+		if [ "$?" -ne 0 ]; then
+			grep -q "export USP_BOARD_IFNAME" ${PROFILE}
+			if [ "$?" -eq 0 ]; then
 				sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
 			fi
+			echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
 		fi
+	else
+		echo "export USP_BOARD_IFNAME=${ifname}" > ${PROFILE}
 	fi

 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f "${db_file}"
+		procd_append_param command -f ${db_file}
 	fi

 	if [ -n "${trust_cert}" ]; then
 		update_keep "${trust_cert}"
 		if [ -f "${trust_cert}" ]; then
-			procd_append_param command -t "${trust_cert}"
+			procd_append_param command -t ${trust_cert}
 		fi
 	fi

 	if [ -n "${client_cert}" ]; then
 		update_keep "${client_cert}"
 		if [ -f "${client_cert}" ]; then
-			procd_append_param command -a "${client_cert}"
+			procd_append_param command -a ${client_cert}
 		fi
 	fi
+
+	procd_set_param env USP_BOARD_IFNAME=${ifname}
 }

 # Create factory reset file
@@ -704,7 +707,6 @@ service_running() {
 start_service() {
 	local enabled

-	mkdir -p /tmp/obuspa/
 	config_load obuspa
 	config_get enabled global enabled

@@ -718,8 +720,8 @@ start_service() {
 	db_init
 	procd_append_param command -r ${PARAM_FILE}
 	procd_set_param respawn \
-			"${respawn_threshold:-5}" \
-			"${respawn_timeout:-10}" "${respawn_retry:-3}"
+			${respawn_threshold:-5} \
+			${respawn_timeout:-10} ${respawn_retry:-3}

 	procd_set_param watch usp.raw
 	procd_close_instance
@@ -731,7 +733,7 @@ stop_service() {
 	config_load obuspa
 	config_get db_file global db_file

-	${PROG} -c stop >/dev/null 2>&1
+	${PROG} -c stop 2>&1 >/dev/null

 	if [ -z "${db_file}" ]; then
 		db_file="/tmp/usp.db"
--- a/owsd/Makefile
+++ b/owsd/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=owsd
-PKG_VERSION:=1.1.4
+PKG_VERSION:=1.1.3
 PKG_RELEASE:=1

 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=e37c6f9d708c454c802eede814cc51fb89c919e9
+PKG_SOURCE_VERSION:=f78f7198944758cd2140887ecd8970432f678fc1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
--- a/paho-mqtt-c/Makefile
+++ b/paho-mqtt-c/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2020 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=lib-paho-mqtt
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=edl-v10
+PKG_LICENSE_FILES:=LICENSE
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/lib-paho-mqtt
+	CATEGORY:=Libraries
+	DEPENDS:=+libopenssl
+	TITLE:=package for mqtt stuff
+endef
+
+
+define Package/lib-paho-mqtt/description
+	a library
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
+endef
+
+define	Package/lib-paho-mqtt/install
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,lib-paho-mqtt))
--- a/qosmngr/files/etc/uci-defaults/60-qos_queue_generate
+++ b/qosmngr/files/etc/uci-defaults/60-qos_queue_generate
@@ -3,7 +3,7 @@
 . /lib/functions.sh

 ethwan="$(db -q get hw.board.ethernetWanPort)"
-cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
+cpu_model="$(brcm_fw_tool -k info)"

 generate_queue(){
 	section="$1"
@@ -19,7 +19,7 @@ generate_queue(){

        if [ $is_lan -eq 1 ]; then
 		case $cpu_model in
-			BCM68*) no_of_q="0 1 2 3" ;;
+			68*) no_of_q="0 1 2 3" ;;
 		esac

                if grep -qE '[0-9]+ archer$' /proc/devices; then 
--- a/qosmngr/files/lib/qos/broadcom.sh
+++ b/qosmngr/files/lib/qos/broadcom.sh
@@ -842,7 +842,7 @@ configure_classify() {
 	fcctl flush
 }

-pre_configure_queue() {
+configure_queue() {
 	# Delete queues
 	rm -rf /tmp/qos/queue_stats

@@ -862,9 +862,7 @@ pre_configure_queue() {
 		touch /tmp/qos/$intf/q_order
 		touch /tmp/qos/$intf/q_precedence
 	done
-}

-configure_queue() {
 	# Load UCI file
 	config_load qos
 	config_foreach handle_q_order queue
@@ -915,7 +913,6 @@ configure_qos() {
 	#queue configuration is being done after shaper configuration,
 	#If port shapingrate configuration on DISC device is called after queue configuration then
 	#driver overwrites the queue shaping rate with default value of port shaping rate.
-	pre_configure_queue
 	configure_shaper
 	configure_queue
 	configure_policer
@@ -924,10 +921,10 @@ configure_qos() {

 reload_qos() {
 	local service_name="$1"
-	local cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
+	local cpu_model="$(brcm_fw_tool -k info)"

 	case $cpu_model in
-		BCM68*|BCM6755) POLICER_SKIP=1 ;;
+		68*|6755) POLICER_SKIP=1 ;;
 	esac

 	if [ -z "$service_name" ]; then
@@ -935,7 +932,6 @@ reload_qos() {
 	elif [ "$service_name" == "shaper" ]; then
 		configure_shaper
 	elif [ "$service_name" == "queue" ]; then
-		pre_configure_queue
 		configure_queue
 	elif [ "$service_name" == "classify" ]; then
 		configure_classify
--- a/stunc/Makefile
+++ b/stunc/Makefile
@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=stunc
-PKG_VERSION:=1.0.4
+PKG_VERSION:=1.0.2

-PKG_SOURCE_VERSION:=9c585888cae94180d715f46f6602090f328240d4
+PKG_SOURCE_VERSION:=d578df0c8e4e7d1b642a5cf037ce468379270534
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/stunc.git

--- a/sulu/Makefile
+++ b/sulu/Makefile
@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=sulu
-PKG_VERSION:=0.2.28
+PKG_VERSION:=0.2.27

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/sulu.git
-PKG_SOURCE_VERSION:=b861e90ed331fb8cba5ed8c9d9b9e9c859f60815
+PKG_SOURCE_VERSION:=5dc2df8dbfe442504a99e46ddf07aefc9fad5faa

 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
--- a/swmodd/Makefile
+++ b/swmodd/Makefile
@@ -6,14 +6,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=swmodd
-PKG_VERSION:=2.0.24
+PKG_VERSION:=2.0.21

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f729686d90b3fb33bb731a9bff119efc5357dfb1
+PKG_SOURCE_VERSION:=78b54d0ed0223a9787133597d3beaa5e97d97520
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -61,12 +61,10 @@ endif

 define Package/swmodd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_DIR) $(1)/etc/swmod
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/etc/init.d/swmodd $(1)/etc/init.d/swmodd
-	$(INSTALL_BIN) ./files/etc/config/swmodd $(1)/etc/config/swmodd
+	$(INSTALL_BIN) ./files/swmodd.init $(1)/etc/init.d/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/swmodd $(1)/usr/sbin/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libswmodd.so $(1)/usr/lib/bbfdm/libswmodd.so
 ifeq ($(CONFIG_PACKAGE_liblxc),y)
--- a/swmodd/files/etc/config/swmodd
+++ b/swmodd/files/etc/config/swmodd
@@ -1,4 +0,0 @@
-config globals 'globals'
-	option enabled '1'
-	option debug '1'
-	option log_level '3'
--- a/swmodd/files/etc/init.d/swmodd
+++ b/swmodd/files/etc/init.d/swmodd
@@ -1,57 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/swmodd
-
-validate_globals_section()
-{
-	uci_validate_section swmodd swmodd "globals" \
-		'enabled:bool:1' \
-		'debug:bool:false' \
-		'log_level:uinteger:1' \
-		'sock:string'
-}
-
-start_service() {
-	local enabled debug log_level sock
-
-	# creating fallback shared mount-point
-	mkdir -p /tmp/swmodd_dw
-
-	config_load swmodd
-
-	validate_globals_section || {
-		log "Validation of uci globals failed"
-		return 1;
-	}
-
-	[ "${enabled}" -eq 0 ] && return 0
-
-	procd_open_instance swmodd
-	procd_set_param command ${PROG}
-
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-		procd_append_param command -l ${log_level}
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s ${sock}
-	fi
-
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service() {
-	service_stop ${PROG}
-}
-
-reload_service() {
-	stop
-	start
-}
--- a/swmodd/files/swmodd.init
+++ b/swmodd/files/swmodd.init
@@ -0,0 +1,23 @@
+#!/bin/sh /etc/rc.common
+
+START=94
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/swmodd
+
+start_service() {
+	procd_open_instance swmodd
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service() {
+	service_stop ${PROG}
+}
+
+reload_service() {
+	stop
+	start
+}
--- a/ubus-mqtt/Makefile
+++ b/ubus-mqtt/Makefile
@@ -0,0 +1,55 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ubus-mqtt
+PKG_VERSION:=14.20.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_URL:=https://dev.iopsys.eu/3rdparty/ubus-mqtt.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=NONE
+
+include $(INCLUDE_DIR)/package.mk
+
+CONFIGURE_VARS += \
+	BUILD_CC="$(HOSTCC)" \
+	TARGET_CC="$(TARGET_CC)"
+
+TARGET_CFLAGS += \
+	-L$(STAGING_DIR)/usr/lib -I$(STAGING_DIR)/usr/include
+
+define Package/ubus-mqtt
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=ubus-mqtt - a ubus replicator for mqtt
+  URL:=http://www.alleato.se/
+  MAINTAINER:=Martin Assarsson
+  DEPENDS:=+jansson +libpthread +libmosquitto +libopenssl +ubus +libubox
+endef
+
+define Package/ubus-mqtt/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/src/ubus-mqtt $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) files/ubus-mqtt.init $(1)/etc/init.d/ubus-mqtt
+endef
+
+define Package/ubus-mqtt/postinst
+#!/bin/sh
+#/etc/init.d/ubus-mqtt enable
+#/etc/init.d/ubus-mqtt restart
+endef
+
+$(eval $(call BuildPackage,ubus-mqtt))
+
+
--- a/ubus-mqtt/files/ubus-mqtt.init
+++ b/ubus-mqtt/files/ubus-mqtt.init
@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+#
+# Start the ubus-mqtt
+#
+
+START=80
+PID_FILE=/var/state/ubus-mqtt.pid
+
+start() {
+        start-stop-daemon -S -b -m -p $PID_FILE -x /usr/sbin/ubus-mqtt
+}
+ 
+stop() {
+        start-stop-daemon -K -p $PID_FILE
+}  
+             
+restart() {
+        stop
+        start
+}
--- a/udpechoserver/Makefile
+++ b/udpechoserver/Makefile
@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=udpechoserver
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.0

-PKG_SOURCE_VERSION:=4e80bbec15b284080798b5ffbe8655febaa239aa
+PKG_SOURCE_VERSION:=a3f0860f4268482f9ec9dad0c67745f615293fca
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/udpechoserver.git

@@ -24,8 +24,6 @@ PKG_LICENSE_FILES:=LICENSE

 include $(INCLUDE_DIR)/package.mk

-MAKE_PATH:=src
-
 define Package/$(PKG_NAME)
  SECTION:=utils
  CATEGORY:=Utilities
@@ -43,13 +41,10 @@ TARGET_CFLAGS += \

 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/udpechoserverd $(1)/usr/sbin/
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/udpechoserverd $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/libudpechoserver.so $(1)/usr/lib/bbfdm/
-	$(INSTALL_DATA) ./files/etc/config/udpechoserver $(1)/etc/config/udpechoserver
-	$(INSTALL_BIN) ./files/etc/init.d/udpechoserverd $(1)/etc/init.d/udpechoserverd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
+	$(CP) ./files/* $(1)/
 endef

 $(eval $(call BuildPackage,$(PKG_NAME)))
--- a/umoci/Makefile
+++ b/umoci/Makefile
@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=umoci
-PKG_VERSION:=0.0.1
-PKG_RELEASE:=1
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_NAME:=umoci
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/opencontainers/umoci.git
-PKG_SOURCE_VERSION:=2cec49f54b72684ef170f11c708c56140f298bf7
-PKG_MIRROR_HASH:=skip
-
-PKG_BUILD_DEPENDS:=golang/host
-PKG_BUILD_PARALLEL:=1
-PKG_USE_MIPS16:=0
-
-GO_PKG:=github.com/opencontainers/umoci/
-GO_PKG_LDFLAGS_X:=main.gitCommit=$(PKG_SOURCE_VERSION) main.version=$(PKG_SOURCE_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-GOLANG_PACKAGE_MK:=$(wildcard $(TOPDIR)/feeds/*/lang/golang/golang-package.mk)
-
-# verify that there is only one single file returned
-ifneq (1,$(words $(GOLANG_PACKAGE_MK)))
-ifeq (0,$(words $(GOLANG_PACKAGE_MK)))
-$(error did not find golang-package.mk in any feed)
-else
-$(error found multiple golang-package.mk files in the feeds)
-endif
-else
-$(info found golang-package.mk at $(GOLANG_PACKAGE_MK))
-endif
-
-include $(GOLANG_PACKAGE_MK)
-
-define Package/umoci
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=umoci utility
-  URL:=https://github.com/opencontainers/umoci
-  DEPENDS:=$(GO_ARCH_DEPENDS)
-endef
-
-define Package/umoci/description
-  OCI (Open Container Initiative) image tool modifies Open Container images.
-endef
-
-GO_PKG_BUILD_VARS += GO111MODULE=auto
-
-define Build/Compile
-	$(call GoPackage/Build/Compile)
-	$(call GoPackage/Package/Install/Bin,$(PKG_INSTALL_DIR))
-endef
-
-define Package/umoci/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/umoci $(1)/usr/bin
-endef
-
-$(eval $(call GoBinPackage,umoci))
-$(eval $(call BuildPackage,umoci))
--- a/uspd/Makefile
+++ b/uspd/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=uspd
-PKG_VERSION:=2.1.44
+PKG_VERSION:=2.1.43

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b5e555ff6643e2c39fed9ffda47015e36436985a
+PKG_SOURCE_VERSION:=c5c9a2675b29ae38d339f44099db30e5f22a278b
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
--- a/wfadatad/Makefile
+++ b/wfadatad/Makefile
@@ -5,16 +5,13 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=wfadatad
-PKG_VERSION:=6.10.4
+PKG_VERSION:=6.10.2

-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=538ab9e9de78eada6d668b076b295eaf51da32e8
+PKG_SOURCE_VERSION:=aaeed1df50a22bd391e5b1609e946991157308f4
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif

 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=PROPRIETARY IOPSYS
@@ -55,25 +52,11 @@ ifeq ($(CONFIG_WFA_DELM_STANDALONE),y)
 MAKE_FLAGS += CONFIG_WFA_DELM_STANDALONE=y
 endif

-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE

-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/wfadatad/ $(PKG_BUILD_DIR)/
-endef
-endif
-
 MAKE_PATH:=src


--- a/wifimngr/Makefile
+++ b/wifimngr/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=wifimngr
-PKG_VERSION:=14.0.6
+PKG_VERSION:=14.0.5

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a248c1508bab5f30297d5b9c12719a90a86d81aa
+PKG_SOURCE_VERSION:=a34624069fe24e5988e7db379e24e379e4479741
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
Author	SHA1	Message	Date
Hemlata Bhatt	99e85b92b2	dectmngr :Remove extra verbose syslog for firmware upgrading on the base station	2022-02-03 16:10:19 +01:00
Jakob Olsson	f1795e0263	map-agent: 6.6.2	2022-02-03 12:45:18 +01:00
Jakob Olsson	a2115711bb	map-controller: 5.4.5	2022-02-02 17:07:02 +01:00
Jakob Olsson	2b26e9083b	map-agent: 6.6.1	2022-02-02 17:06:20 +01:00
Sukru Senli	1978d357c9	crun: remove as it is now available under openwrt feed packages	2022-02-02 11:16:01 +01:00
Jakob Olsson	822f77590d	wifimngr: 05-wifi: update to new map backhaul file	2022-01-31 14:59:04 +01:00