swmodd: added libcrun support for crun containers

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.6.2
+PKG_VERSION:=6.5.3
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=be6a8fc69fc257f6e3bbd8864b7b1d25b8e77190
+PKG_SOURCE_VERSION:=e76452462912f2a5d59e759fd61e0e1d05a6e76d
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

crashlog/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.1
+PKG_VERSION:=3.5.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ef9d4c6124d0ca66f048f3d678d9a25f13aa4207
+PKG_SOURCE_VERSION:=d26b638450956d071f8717419da4bc2c8f3d625c
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -53,7 +53,6 @@ endif
 
 TARGET_CFLAGS += \
 	-Wall \
-        -Werror \
 	-I$(STAGING_DIR)/usr/include/libxml2
 
 ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.4.35
+PKG_VERSION:=6.4.34
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=699744d5ae9e043715c260f9b58bbc18747895f9
+PKG_SOURCE_VERSION:=4b4f04fb2485909fc56b409ae89296a815a98988
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=94df920d39e8589c7ac7f5523bf372d48ef24c5e
+PKG_SOURCE_VERSION:=548fa04d2714feeadb500192905fa6fb8172e6dd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -56,10 +56,6 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
-
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=8.2.27
+PKG_VERSION:=8.2.26
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=da88c8c28656b2db54ab205d26faccda68546c05
+PKG_SOURCE_VERSION:=f3eaed2e52a5db38fef6b732fa3c953220b0ec58
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

ieee1905/Config.map-plugin.in

@@ -1,14 +0,0 @@
-if (PACKAGE_map-plugin)
-
-menu "Configurations"
-
-config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-	bool "Sync configuration between dynamic controllers in the network"
-	default n
-
-config MULTIAP_FUZZ_1905_CMDUS
-	bool "Include support to fuzz 1905 CMDUs for testing purpose"
-	default n
-
-endmenu
-endif

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.6.16
+PKG_VERSION:=4.6.8
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=be0d54ed751ef697e0cd5cf1393dc6932672d8ef
+PKG_SOURCE_VERSION:=43cc5cac9a7dc1fd3a78f60509800d853d67d476
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -57,10 +57,6 @@ $(call Package/ieee1905/Default,$(1))
 	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
 endef
 
-define Package/map-plugin/config
-  source "$(SOURCE)/Config.map-plugin.in"
-endef
-
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
 endef
@@ -78,11 +74,6 @@ ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
 TARGET_CFLAGS += -DHAS_WIFI
 endif
 
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-
 MAKE_PATH:=src
 
 

ieee1905/files/etc/init.d/ieee1905

@@ -5,82 +5,7 @@ STOP=21
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
-validate_ieee1905_section() {
-	uci_validate_section ieee1905 ieee1905 "ieee1905" \
-			'enabled:bool:true' \
-			'macaddress:or("auto",macaddr)' \
-			'registrar:string' \
-			'extension:bool:false' \
-			'extmodule:list(string)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ali_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'ifname:string' \
-			'type:or("bridge",string)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60")' \
-			'ssid:string' \
-			'encryption:or("psk2", "sae-mixed", "sae", string)' \
-			'key:string' \
-			'uuid:string' \
-			'manufacturer:string' \
-			'model_name:string' \
-			'device_name:string' \
-			'model_number:string' \
-			'serial_number:string' \
-			'device_type:string' \
-			'os_version:uinteger'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ap section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ieee1905_config() {
-	IS_CFG_VALID=1
-
-	validate_ieee1905_section &&
-		config_foreach validate_ali_section "al-iface" &&
-		config_foreach validate_ap_section ap
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
-	config_load "ieee1905"
-	validate_ieee1905_config || return 1;
-
 	procd_open_instance
         procd_set_param command "/usr/sbin/ieee1905d"
 	procd_set_param respawn

libjwt/Makefile

@@ -0,0 +1,54 @@
+
+# Copyright (C) 2018 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libjwt
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
+PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+PKG_LICENSE:=LGPLv3
+PKG_LICENSE_FILES:=COPYING
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libjwt
+  CATEGORY:=Libraries
+  DEPENDS:=+libopenssl +jansson
+  TITLE:= libjwt
+endef
+
+
+#TARGET_CFLAGS += \
+#	-I$(STAGING_DIR)/usr/include
+#	-I$(STAGING_DIR)/usr/include/libnl3
+
+#MAKE_FLAGS += \
+#	CFLAGS="$(TARGET_CFLAGS)" \
+#	LDFLAGS="$(TARGET_LDFLAGS)" \
+#	FPIC="$(FPIC)" \
+#	PLATFORM="$(TARGET_PLATFORM)" \
+#	subdirs="$(subdirs)"
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+define Package/libjwt/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libjwt))

map-agent/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_map-agent)
-
-menu "Configurations"
-
-config AGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-endmenu
-endif

map-agent/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=7.1.7
+PKG_VERSION:=6.6.4
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=25d9004691ef667ceddc6c5cae8b98f858ef78d9
+PKG_SOURCE_VERSION:=2381371aba07b861003afc709369fa1ffc034e13
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
@@ -50,7 +50,7 @@ define Package/dynbhd/description
 endef
 
 define Package/map-agent/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
@@ -58,10 +58,6 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DAGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
 MAKE_PATH:=src
 
 define Package/map-agent/install

map-agent/files/etc/init.d/mapagent

@@ -5,44 +5,32 @@ STOP=20
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
 MAP_DEV="map_dev"
 MAP_IF="map"
+MAP_VETH="lei"
 
 create_map() {
-	ip link add lei type veth peer name lei_map 2>/dev/null
-	ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-
 	uci -q set network.${MAP_DEV}=device
 	uci -q set network.${MAP_DEV}.name=br-map
 	uci -q set network.${MAP_DEV}.type=bridge
-
-	uci -q show network.${MAP_DEV}.ports | grep -q lei_map || {
-		uci -q add_list network.${MAP_DEV}.ports='lei_map'
-	}
+	uci -q set network.${MAP_DEV}.bridge_empty=1
 
 	uci -q set network.${MAP_IF}=interface
 	uci -q set network.${MAP_IF}.device=br-map
 	uci -q set network.${MAP_IF}.is_lan=1
 
-	uci -q show network.br_lan.ports | grep -q lei_lan || {
-		uci -q add_list network.br_lan.ports="lei_lan"
-	}
-
 	uci -q set mapagent.agent.al_bridge=br-map
 
 	uci -q commit
 
 	ubus call network reload
-	ubus -t 5 wait_for network.interface.map
+	ubus -t 5 wait_for network.device
 
-	brctl addif br-map lei_map 2>/dev/null
-	brctl addif br-lan lei_lan 2>/dev/null
-
-	ip link set lei up 2>/dev/null
-	ip link set lei_map up 2>/dev/null
-	ip link set lei_lan up 2>/dev/null
+	ip link add ${MAP_VETH} type veth peer name ${MAP_VETH}_lan 2>/dev/null
+	brctl addif br-map ${MAP_VETH} 2>/dev/null
+	brctl addif br-lan ${MAP_VETH}_lan 2>/dev/null
+	ip link set ${MAP_VETH} up 2>/dev/null
+	ip link set ${MAP_VETH}_lan up 2>/dev/null
 }
 
 remove_map() {
@@ -68,137 +56,10 @@ start_dynbhd_service() {
 	procd_close_instance
 }
 
-validate_agent_section() {
-	uci_validate_section mapagent agent "agent" \
-		'enabled:bool:true' \
-		'debug:range(0,16)' \
-		'profile:range(1,2):2' \
-		'brcm_setup:bool:false' \
-		'controller_macaddr:macaddr' \
-		'al_bridge:string' \
-		'netdev:string' \
-		'vlan_segregation:bool:false' \
-		'resend_num:uinteger:0' \
-		'dyn_cntlr_sync:bool:true'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of agent section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_cs_section() {
-	local section="$1"
-
-	uci_validate_section mapagent $section "${section}" \
-		'local:bool:false' \
-		'id:string' \
-		'probe_int:range(0,1000):20' \
-		'retry_int:range(0,255):3' \
-		'autostart:bool:false'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of controller_select section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section mapagent $section "${1}" \
-			'ifname:string' \
-			'device:string' \
-			'band:or("2", "5")' \
-			'enabled:bool:true' \
-			'onboarded:bool:false' \
-			'ssid:string' \
-			'key:string' \
-			'encryption:string' \
-			'disallow_bsta_p1:bool:false' \
-			'disallow_bsta_p2:bool:false'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of ap section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_radio_section() {
-	local section="$1"
-
-	uci_validate_section mapagent $section "${1}" \
-			'device:string' \
-			'band:or("2", "5")' \
-			'configured:bool:false' \
-			'onboarded:bool:false' \
-			'dedicated_backhaul:bool:false' \
-            'steer_policy:range(0,255)' \
-			'util_threshold:range(0,255)' \
-			'rcpi_threshold:range(0,255)' \
-			'report_rcpi_threshold:range(0,255)' \
-			'include_sta_stats:bool:false' \
-			'include_sta_metric:bool:false' \
-			'rcpi_hysteresis_margin:range(0,255)' \
-			'report_util_threshold:range(0,255)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of radio section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_policy_section() {
-	local section="$1"
-
-	uci_validate_section mapagent $section "${1}" \
-			'report_interval:range(0,255)' \
-			'pvid:uinteger' \
-			'report_interval:range(0,255)' \
-			'pcp_default:range(0,255)' \
-			'report_scan:bool' \
-			'report_sta_assocfails:bool' \
-			'report_sta_assocfails_rate:uinteger' \
-			'steer_exclude:list(macaddr)' \
-			'steer_exclude_btm:list(macaddr)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of policy section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_agent_config() {
-	IS_CFG_VALID=1
-
-	validate_agent_section &&
-		config_foreach validate_cs_section controller_select &&
-		config_foreach validate_ap_section ap &&
-        config_foreach validate_radio_section radio &&
-        config_foreach validate_policy_section policy
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "mapagent" "Validation of mapagent UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
 	[ -f /usr/sbin/dynbhd ] && start_dynbhd_service
 
 	config_load "mapagent"
-	validate_agent_config || return 1;
 
 	ubus -t 5 wait_for wifi
 

map-agent/files/lib/wifi/multiap

@@ -57,7 +57,6 @@ get_type_by_section() {
 
 brcm_sync_credentials() {
 	bands=""
-	json_init
 	mapagent_process_fh() {
 		local section=$1
 		local dev=$2
@@ -81,17 +80,6 @@ brcm_sync_credentials() {
 		uci -q set ieee1905.${section}.ssid="$ssid"
 		uci -q set ieee1905.${section}.encryption=$encryption
 		uci -q set ieee1905.${section}.key="$key"
-		json_select "$band" > /dev/null
-		if [ "$?" = "0" ]; then
-			json_get_keys keys
-
-			for key in ${keys};
-			do
-				json_get_var val "$key"
-				uci -q set ieee1905.${section}.$key="$val"
-			done
-			json_select ..
-		fi
 	}
 
 	mapagent_process_radio() {
@@ -114,38 +102,7 @@ brcm_sync_credentials() {
 	}
 
 	ieee1905_del_ap() {
-		append_value() {
-			local section=$1
-			local key=$2
-			shift
-			shift
-
-			while [ "$key" != "" ]; do
-				val=$(uci -q get ieee1905.$section.$key)
-				[ "$val" = "" ] && {
-					key=$1
-					shift
-					continue
-				}
-				json_add_string "$key" ${val}
-				key=$1
-				shift
-			done
-		}
-
 		local section=$1
-		local band
-
-		config_get band $section band
-		json_select "$band" > /dev/null
-		rc=$?
-		[ "$rc" != "0" ] && json_add_object "$band"
-		append_value $section "manufacturer" "model_name" "device_name" "model_number" "serial_number" "device_type" "os_version"
-		if [ "$rc" != "0" ]; then
-			json_close_object
-		else
-			json_select ..
-		fi
 
 		uci -q delete ieee1905.${section}
 	}
@@ -157,9 +114,9 @@ brcm_sync_credentials() {
 	config_foreach mapagent_process_radio radio
 
 	uci commit ieee1905
-	json_cleanup
 }
 
+
 brcm_write_credentials() {
 	config_load mapagent
 

map-agent/files/lib/wifi/traffic_separation

@@ -4,15 +4,11 @@
 
 ### Traffic Separation ###
 
-dbg() {
-	logger -t traffic_separation $@
-}
-
 ts_sub() {
 
 	ts_usage() {
 		cat <<EOF
-Usage: $0 [create|delete|populate|primary|reload]
+Usage: $0 [create|delete|populate]
 Traffic Separation related functions.
 create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
 create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
@@ -20,7 +16,7 @@ create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethe
 delete <iface>				- delete vlan device
 populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
 primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
-reload     				- reload network with new configuration
+     
 EOF
 	exit 1
 	}
@@ -30,102 +26,54 @@ EOF
 		echo $bridge
 	}
 
-	set_wireless_bridge() {
-		config_load wireless
-
-		_set_network() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
-
-			config_get ifname $sec ifname
-			[ "$iface" != "$ifname" ] && continue
-
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
-
-			config_get network $sec network
-			local new_network=${bridge##br-}
-			if [ "$new_network" != "$network" ] ; then
-				uci -q set wireless.${sec}.network=${new_network}
-				uci commit wireless
-			fi
-
-			brctl addif $bridge $iface &> /dev/null
-		}
-
-		config_foreach _set_network wifi-iface ${1} ${2}
-	}
-
 	ts_create() {
 
 		_create_vlan_dev() {
 			iface=$1				# real iface
 			vid=$2					# Vlan ID
-			bridge=$3				# bridge iface should be connected
-			vlan_dev=$4
-
-			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+			bridge="$(_get_bridge $iface)"		# bridge iface is connected to
+			vlan_dev=${iface}_vlan${vid}		# name of vlan device to create
 
 			# remove interface from bridge if it is in one
-			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
+			[ -n "$bridge" ] && brctl delif $bridge $iface &> /dev/null
 
-			# (re)create vlan device
-			ip link show $vlan_dev && vlanctl --if-delete $vlan_dev
+			# create vlan device
 			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
 
-			vlanctl --if $iface --tx --tags 0 --default-miss-drop
-			vlanctl --if $iface --tx --tags 1 --default-miss-drop
-			vlanctl --if $iface --tx --tags 2 --default-miss-drop
-			vlanctl --if $iface --rx --tags 0 --default-miss-drop
-			vlanctl --if $iface --rx --tags 1 --default-miss-drop
-			vlanctl --if $iface --rx --tags 2 --default-miss-drop
-
 			# bring the vlan device up and add back to bridge if it was in one
-			brctl addif $bridge $vlan_dev &> /dev/null
+			[ -n "$bridge" ] && brctl addif $bridge $vlan_dev &> /dev/null
+			ip link set dev $vlan_dev up
+
+			echo $vlan_dev
 		}
 
 		ts_create_fh() {
 			iface=$1				# fh iface
 			vid=$2					# SSID specific (secondary) or primary vid
-			bridge=$3
 
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
+			[ -n "$iface" ] && [ -n "$vid" ] || {
 				cat <<EOF
-Adding FH device requires IFACE, VID and bridge
+Adding FH device requires IFACE and VID.
 EOF
 				exit 1
 			}
 
 			# create vlan device
-			#set_wireless_bridge $iface $bridge
-
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
+			vlan_dev=$(_create_vlan_dev $iface $vid)
 
 			# add rules
+			# Note: removing these for now since these packets are read directly from the iface anyway
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x888e --set-rxif $vlan_dev --rule-append		# incoming EAPOL
 #			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
-
-			# EAPOL frames
-			vlanctl --if $iface --rx --tags 0 --filter-ethertype 34958 --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --rx --tags 1 --filter-ethertype 34958 --pop-tag --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --tx --tags 0 --filter-txif $vlan_dev --filter-ethertype 34958 --rule-append
-
-			# 8021q vlan id TAG/UNTAG
 			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
 			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
-
-			ip link set $iface up
-			ip link set $vlan_dev up
 		}
 
+# Note: Currently not used (will be needed for Profile 1)
 		ts_create_bh() {
 			iface=$1				# bh iface
 			vid=$2					# primary vid
 			profile=$3				# agent profile (1 or 2)
-			bridge=$4				# bridge interface should be connected to
 
 			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
 				cat <<EOF
@@ -134,13 +82,40 @@ EOF
 				exit 1
 			}
 
-			#[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
+			# create vlan device
+			vlan_dev=$(_create_vlan_dev $iface $vid)
 
-			old_vid=$(wl -i $1 map_8021q_settings)
-			old_vid=${old_vid##* }
-			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
+			# add rules
+			case "$profile" in
+				1 | profile_1 | profile1 | Profile_1 | Profile1)
+					vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --pop-tag --rule-append
+					;;
+				2 | profile_2 | profile2 | Profile_2 | Profile2)
+					vlanctl --if $iface --rx --tags 1 --set-rxif $vlan_dev --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --rule-append								# note: already default
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x893a --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing IEEE1905.1
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x888e --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing EAPOL
+					;;
+				*)
+					ts_delete $iface
+					ts_usage
+					exit 1
+					;;
+			esac
+		}
 
-			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
+		ts_create_bh_drv() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
 
 			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
 			wl -i $iface down &> /dev/null
@@ -149,118 +124,53 @@ EOF
 			wl -i $iface up &> /dev/null
 		}
 
-		ts_create_lei() {
-			vid=$1					# primary vid
-			pbits=$2				# default pbits to apply
-			vlan_bridge=$3				# name of ts subsystem bridge
-			lan_bridge=$4				# name of node local bridge
+		ts_create_eth() {
 
-			[ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
-				cat <<EOF
-Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
-EOF
-				exit 1
+			_ts_setup() {
+				vlan_bridge=$1
+				lan_bridge=$2
+				vlan_dev=$3
+				lan_dev=${vlan_dev}_lan
+
+				ip link show $vlan_dev &> /dev/null || ip link add $vlan_dev type veth peer name $lan_dev
+				brctl addif $vlan_bridge $vlan_dev &> /dev/null
+				brctl addif $lan_bridge $lan_dev &> /dev/null
+				ip link set $vlan_dev up
+				ip link set $lan_dev up
 			}
 
-			ip link show lei &> /dev/null || {
-				ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-			}
-
-			old_vid=$(ip -d link show lei_lan | sed -n 's/vlan.*id \([0-9][0-9]*\) .*/\1/p')
-
-			[ "$old_vid" != "$vid" ] && {
-				ip link del lei_lan
-				ip link add link lei name lei_lan type vlan id ${vid}
-			}
-
-			brctl addif ${lan_bridge} lei_lan &>/dev/null
-			brctl addif ${vlan_bridge} lei_map &>/dev/null
-
-			ip link set lei up
-			ip link set lei_map up
-			ip link set lei_lan up
-		}
-
-		_create_eth() {
 			iface=$1				# Multi-AP Logical Ethernet Interface
 			vid=$2					# primary vid
-			bridge=$3				# name of ts subsystem bridge
-			pbits=0
+			pbits=$3				# default pbits to apply
+			vlan_bridge=$4				# name of ts subsystem bridge
+			lan_bridge=$5				# name of node local bridge
 
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ] || {
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
 				cat <<EOF
 Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
 EOF
 				exit 1
 			}
 
-			dbg create $@
+			# create virtual eth device between bridges (if it doesn't exist))
+			_ts_setup $vlan_bridge $lan_bridge $iface
 
-			ip link set $iface down
+			# create vlan device
+			vlan_dev=$(_create_vlan_dev $iface $vid)
 
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
+			# TODO: how to disable returning traffic back to incoming interface?
 
+			# add rules
 			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
 			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
-
-			[ $# -le 3 ] && exit 0
-			shift 3
-
-			while [ -n "$1" ] ; do
-				vid=$1
-				vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append
-				vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append
-				shift
-			done
-
-			ip link set $iface up
-			ip link set $vlan_dev up
-		}
-
-		ts_create_eths() {
-			pvid=$1					# primary vid
-			bridge=$2				# name of ts subsystem bridge
-
-			shift 2
-			# TODO use ieee1905 bridge
-			for iface in $(uci get network.br_lan.ports) ; do
-				[ "$iface" = "lei_lan" ] && continue
-				_create_eth $iface $pvid $bridge $@
-				ubus call ieee1905 del_interface "{\"ifname\":\"$iface\"}"
-			done
 		}
 
 		ts_create_dhcp() {
-			local diff=""
-
-                        _net_setup() {
-				local name=$1
-				local devname=$2
-				local vid=$3
-
-				[ -z "$(uci -q get network.${name})" ] && {
-					uci -q set network.${name}="interface"
-					uci -q set network.${name}.device="$devname"
-					uci -q set network.${name}.is_lan="1"
-					uci -q set network.${name}.proto="static"
-					# TODO vid > 255
-					local ip_addr="192.168.${vid}.1"
-					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
-					uci -q set network.${name}.ipaddr="${ip_addr}"
-					uci -q set network.${name}.netmask="255.255.255.0"
-
-					diff="1"
-				}
-
-				[ "$diff" = "1" ] && uci -q commit network
-			}
-
 			_br_setup() {
 				local name=$1
 				local sinkname=$2
 				local vid=$3
+				local diff=""
 
 				[ -z "$(uci -q get network.${name}_dev)" ] && {
 					uci -q set network.${name}_dev="device"
@@ -283,7 +193,11 @@ EOF
 					diff="1"
 				}
 
-				[ "$diff" = "1" ] && uci -q commit network
+				[ "$diff" = "1" ] && {
+					uci -q commit network
+					ubus call network reload
+					ubus -t 5 wait_for network.device
+				}
 			}
 
 			_dhcp_setup() {
@@ -303,44 +217,43 @@ EOF
 				uci -q add_list dhcp.${name}.ra_flags="managed-config"
 				uci -q add_list dhcp.${name}.ra_flags="other-config"
 
-				diff="1"
 				uci -q commit dhcp
+				ubus call uci commit '{"config":"dhcp"}'
 			}
 
-			_firewall_setup() {
+			_wan_setup() {
 				local name=$1
-				local network=$2
-				local zone_exist=0
 
 				config_load firewall
 
 				_process_zone() {
 					local section=$1
-					local new_name=$2
+					local sink=$2
 					local name
+					local exists=false
 
 					config_get name $section name
 
-					[ "$name" == "$new_name" ] && zone_exist=1
+					[ "$name" == "lan" ] || return
+
+					_process_list() {
+						local value=$1
+
+						[ "$value" == "$sink" ] && exists=true && return 1
+					}
+
+					config_list_foreach "$section" network _process_list 
+
+					[ $exists = false ] && {
+						uci -q add_list firewall.${section}.network="${sink}"
+						uci -q commit firewall
+						ubus call uci commit '{"config":"firewall"}'
+					}
+
+					return 1
 				}
 
 				config_foreach _process_zone zone $name
-
-				[ "$zone_exist" != "0" ] && return
-
-				uci -q add firewall zone
-				uci -q set firewall.@zone[-1].name="$name"
-				uci -q add_list firewall.@zone[-1].network="$network"
-				uci -q set firewall.@zone[-1].input='ACCEPT'
-				uci -q set firewall.@zone[-1].output='ACCEPT'
-				uci -q set firewall.@zone[-1].forward='ACCEPT'
-
-				uci -q add firewall forwarding
-				uci -q set firewall.@forwarding[-1].src="$name"
-				uci -q set firewall.@forwarding[-1].dest="wan"
-
-				diff="1"
-				uci -q commit firewall
 			}
 
 			vid=$1					# primary vid
@@ -352,26 +265,20 @@ EOF
 				exit 1
 			}
 
-			ip link show sink${vid} || {
-				ip link add sink${vid} type veth peer name sink${vid}_vlan
-				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
-			}
+			br_dev=sink_vlan${vid}			# name of vlan device to create
 
-			ip link set sink${vid} up
-			ip link set sink${vid}_peer up
-			ip link set sink${vid}_vlan up
 
-			diff=""
-			_net_setup sink${vid} sink${vid}_peer ${vid}
-			_dhcp_setup sink${vid}
-			_firewall_setup lan${vid} sink${vid}
+			ip l a sink1_vlan${vid} type veth peer name sink2_vlan${vid}
+			vlanctl --mcast --if-create-name sink2_vlan${vid} sink3_vlan${vid} --if sink2_vlan${vid} --set-if-mode-rg
+			vlanctl --if sink2_vlan${vid} --rx --tags 1 --filter-vid ${vid} 0 --set-rxif sink3_vlan${vid} --pop-tag --rule-append
+			vlanctl --if sink2_vlan${vid} --tx --tags 0 --filter-txif sink3_vlan${vid} --push-tag --set-vid ${vid} 0 --rule-append
+			ip l s sink1_vlan${vid} up
+			ip l s sink2_vlan${vid} up
+			ip l s sink3_vlan${vid} up
 
-			[ "$diff" = "1" ] && {
-				ubus call network reload
-				ubus -t 5 wait_for network.interface.sink${vid}
-			}
-
-			brctl addif br-map sink${vid}_vlan &> /dev/null
+			_br_setup $br_dev sink3_vlan${vid} $vid
+			_dhcp_setup $br_dev
+			_wan_setup $br_dev
 		}
 
 	local type=$1
@@ -379,9 +286,9 @@ EOF
 
 	case "$type" in
 		fh) ts_create_fh $@;;
-		bh) ts_create_bh $@;;
-		lei) ts_create_lei $@;;
-		eths) ts_create_eths $@;;
+#		bh) ts_create_bh $@;;
+		bh) ts_create_bh_drv $@;;
+		eth) ts_create_eth $@;;
 		dhcp) ts_create_dhcp $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;
@@ -393,15 +300,12 @@ EOF
 
 		path=$(ls -d /sys/class/net/${iface}/upper_*)
 		[ -z "$path" ] && exit 0
-
 		vlan_dev=${path##*upper_}
 		bridge="$(_get_bridge $vlan_dev)"
 
-		[ -n "$bridge" ] && {
-			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
-			brctl addif $bridge $iface &> /dev/null # needed to add again
-                }
+		vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
 
+		brctl addif $bridge $iface &> /dev/null
 	}
 
 	ts_populate() {
@@ -423,8 +327,8 @@ EOF
 		vlan_dev=${path##*upper_}
 
 		# add rules
-		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
-		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
+		vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
+		vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
 	}
 
 	ts_primary() {
@@ -461,50 +365,16 @@ EOF
 		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
 	}
 
-	ts_reload() {
-		local dhcp_reload=$1
-
-		# workaround for missing backhaul wifi.ap.* ubus obj's:
-		# iterate in config and setup bh
-		config_load wireless
-
-		_setup_bh_iface() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
-
-			config_get ifname $sec ifname
-
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
-				ts_create bh $ifname 1 2 br-map
-			}
-		}
-
-		config_foreach _setup_bh_iface wifi-iface
-
-		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
-
-		# another workaround for netif? removed
-		# sink devices for br-map bridge
-		for sink in $(ubus list network.interface.sink*) ; do
-			local sink_vlan=${sink/network.interface./}_vlan
-			brctl addif br-map $sink_vlan &> /dev/null
-		done
-	}
-
 	local func=$1
 	shift
 
 	case "$func" in
-		create) dbg "create $@"; ts_create $@;;
-		delete) dbg "delete $@"; ts_delete $@;;
-		populate) dbg "populate $@"; ts_populate $@;;
-		primary) dbg "primary $@"; ts_primary $@;;
-		unicast) dbg "unicast $@"; ts_unicast $@;;
-		multicast) dbg "multicast $@"; ts_multicast $@;;
-		reload) dbg "reload $@"; ts_reload $@;;
+		create) ts_create $@;;
+		delete) ts_delete $@;;
+		populate) ts_populate $@;;
+		primary) ts_primary $@;;
+		unicast) ts_unicast $@;;
+		multicast) ts_multicast $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;
 	esac

map-controller/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_map-controller)
-
-menu "Configurations"
-
-config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-endmenu
-endif

map-controller/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=6.0.4
+PKG_VERSION:=5.4.7
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=005f085252640decd55c83bfbd9da6fa32071593
+PKG_SOURCE_VERSION:=eaeebf6432bf845c8d9f055ffb63c46532477d06
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
@@ -34,7 +34,7 @@ define Package/map-controller/description
 endef
 
 define Package/map-controller/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
@@ -44,10 +44,6 @@ TARGET_CFLAGS += \
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/

map-controller/files/etc/init.d/mapcontroller

@@ -5,8 +5,6 @@ STOP=20
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
 handle_controller_select() {
 	local section="$1"
 
@@ -14,122 +12,10 @@ handle_controller_select() {
 	return 1
 }
 
-validate_controller_section() {
-	uci_validate_section mapcontroller controller "controller" \
-		'enabled:bool:true' \
-		'registrar:string' \
-		'debug:range(0,16)' \
-		'resend_num:uinteger:0' \
-		'enable_sta_steer:bool:false' \
-		'enable_bsta_steer:bool:false' \
-		'use_bcn_metrics:bool:false' \
-		'use_usta_metrics:bool:false'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of controller section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5")' \
-			'ssid:string' \
-			'encryption:or("sae-mixed", "sae", "psk-mixed", "psk2", "psk",
-						   "wpa-mixed", "wpa2", "wpa", "none", "open")' \
-			'key:string' \
-			'vid:range(1,65535):1' \
-			'type:or("backhaul", "fronthaul", "combined")' \
-			'disallow_bsta:list(range(0,255)):0' \
-			'enabled:bool:true'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of ap section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_node_section() {
-	local section="$1"
-
-	uci_validate_section mapcontroller $section "${1}" \
-			'agent_id:macaddr' \
-			'backhaul_ul_macaddr:macaddr' \
-			'backhaul_dl_macaddr:macaddr' \
-			'backhaul_type:or("none")' \
-			'primary_vid:range(0,255):1' \
-			'primary_pcp:range(0,255):0' \
-			'report_sta_assocfails:bool:false' \
-			'report_sta_assocfails_rate:uinteger' \
-			'report_metric_periodic:range(0,255)' \
-			'report_scan:bool:false' \
-			'steer_exclude:list(macaddr)' \
-			'steer_exclude_btm:list(macaddr)' \
-			'steer_disallow:bool:false' \
-			'coordinated_cac:bool:false' \
-			'traffic_separation:bool:false' \
-			'sta_steer:bool:false'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of node section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_radio_section() {
-	local section="$1"
-
-	uci_validate_section mapcontroller $section "${1}" \
-			'agent_id:macaddr' \
-			'macaddr:macaddr' \
-			'band:or("2", "5")' \
-			'steer_policy:range(0,2)' \
-			'util_threshold:range(0,255)' \
-			'rcpi_threshold:range(0,255)' \
-			'report_rcpi_threshold:range(0,255)' \
-			'report_util_threshold:range(0,255)' \
-			'report_rcpi_hysteresis_margin:range(0,255)' \
-			'include_sta_stats:bool:false' \
-			'include_sta_metric:bool:false'
-
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of radio section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_controller_config() {
-	IS_CFG_VALID=1
-
-	validate_controller_section &&
-		config_foreach validate_ap_section ap &&
-		config_foreach validate_node_section node &&
-		config_foreach validate_radio_section radio
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "mapcontroller" "Validation of mapcontroller UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
 	local enabled
 
 	config_load "mapcontroller"
-	validate_controller_config || return 1;
-
 	config_get_bool enabled controller enabled 1
 	[ "$enabled" -eq 0 ] && return
 

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=3.2.4
+PKG_VERSION:=3.2.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=55b4bae9338ffa19255756c20626228ca4f30ee2
+PKG_SOURCE_VERSION:=8f1bd16f5023e41681e1b174afa92cfdce4abbb0
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz

map-topology/files/etc/init.d/topologyd

@@ -5,72 +5,7 @@ STOP=21
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
-validate_topology_config() {
-	uci_validate_section topology topology "topology" \
-			'enabled:bool:true' \
-			'depth:range(0,16)' \
-			'interval:range(0,65535)' \
-			'maxlog:range(0,128)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "topology" "Validation of topology UCI file failed"
-		return 1
-	}
-	return 0
-}
-
-validate_global_section() {
-	uci_validate_section hosts global "global" \
-		'ageing_timer:uinteger' \
-		'reboot_persistent:bool'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "hosts" "Validation of global section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_host_section() {
-	local section="$1"
-
-	uci_validate_section hosts $section "${1}" \
-			'macaddr:macaddr' \
-			'interface_type:or("wifi","eth")' \
-			'active:bool' \
-			'active_last_change:string'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "hosts" "Validation of host section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_hosts_config() {
-	IS_CFG_VALID=1
-
-	validate_global_section &&
-		config_foreach validate_host_section host
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "topology" "Validation of hosts UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
-	config_load "topology"
-	validate_topology_config || return 1;
-
-	config_load "hosts"
-	validate_hosts_config || return 1;
-
 	procd_open_instance
         procd_set_param command "/usr/sbin/topologyd"
 	procd_set_param respawn

mqtt-ciotc/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2020 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=mqtt-ciotc
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=Apache-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/mqtt-ciotc
+	CATEGORY:=Utilities
+	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
+	TITLE:=mqtt google iot clinet
+endef
+
+define Package/mqtt-ciotc/description
+	mqtt google iot client
+endef
+
+define Package/mqtt-ciotc/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -0,0 +1,3 @@
+config certs 'certs'
+	option private '/etc/mqtt-ciotc/rsa_private.pem'
+	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -0,0 +1,35 @@
+#!/bin/sh /etc/rc.common
+
+START=96
+STOP=10
+PROG=/sbin/mqtt_ciotc
+
+USE_PROCD=1
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	config_load mqtt_ciotc
+	config_get private certs private
+	config_get root certs root
+
+	[ -n $private ] && procd_append_param command --private-cert $private
+	[ -n $root ] && procd_append_param command --root-cert $root
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service()
+{
+	service_stop ${PROG}
+}
+
+reload_service() {
+#	procd_send_signal wifilife # use SIGHUP
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger "mqtt_ciotc"
+}

obuspa/Config.in

@@ -2,24 +2,16 @@ if PACKAGE_obuspa
 
 menu "Configuration"
 
-config OBUSPA_DB_PATH
-	string "Configure path for usp.db file"
-	default "/tmp/"
-
-config OBUSPA_MTP_ENABLE_MQTT
-	bool "Enable MQTT as mtp protocol"
-	default y
-
-config OBUSPA_MTP_ENABLE_WEBSOCKETS
-	bool "Enable WebSockets as mtp protocol"
-	default y
-
 config OBUSPA_MTP_ENABLE_STOMP
 	bool "Enable STOMP as mtp protocol"
 	default y
 
+config OBUSPA_MTP_ENABLE_MQTT
+	bool "Enable MQTT as mtp protocol"
+	default y
+
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
-	default n
+	default y
 endmenu
 endif

obuspa/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=5.0.0.3
+PKG_VERSION:=4.1.0.18
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9d957848b9ac1d381149ce43b59775c21b1e24e0
+PKG_SOURCE_VERSION:=af3d4663d66942e3b0e3253375c5620629769aa5
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -31,7 +31,7 @@ define Package/obuspa
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=USP agent
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto-ssl +libwebsockets-openssl
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto
 endef
 
 define Package/obuspa/description
@@ -44,14 +44,7 @@ endef
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-	-Wall \
-	-Werror
-
-ifneq ($(CONFIG_OBUSPA_DB_PATH),)
-  CONFIGURE_ARGS += \
-	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
-endif
+	-D_GNU_SOURCE
 
 ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_STOMP),y)
   CONFIGURE_ARGS += \
@@ -77,14 +70,6 @@ else
 	--disable-coap
 endif
 
-ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_WEBSOCKETS),y)
-  CONFIGURE_ARGS += \
-	--enable-websockets
-else
-  CONFIGURE_ARGS += \
-	--disable-websockets
-endif
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/

obuspa/files/etc/init.d/obuspa

@@ -31,7 +31,7 @@ cleanup() {
 trap cleanup EXIT
 
 log() {
-	echo "$*"|logger -t obuspa.init -p debug
+	echo "${@}"|logger -t obuspa.init -p debug
 }
 
 db_set() {
@@ -49,8 +49,9 @@ update_keep() {
 		return;
 	fi
 
-	if grep -q "${keep_file}" ${KEEP_FILES}; then
-		echo "${keep_file}" >> ${KEEP_FILES}
+	grep -q "${keep_file}" ${KEEP_FILES}
+	if [ "$?" -ne 0 ]; then
+		echo ${keep_file} >> ${KEEP_FILES}
 	fi
 }
 
@@ -62,12 +63,11 @@ get_index() {
 }
 
 get_role_index_from_json() {
-	local role="$*"
+	local role="${@}"
 	local num=0
-	local roles_obj
 
 	# In case of role is empty or file not present
-	if [ -z "${role}" ] || [ ! -f "${role_def_file}" ]; then
+	if [ -z "${role}" -o ! -f "${role_def_file}" ]; then
 		return 0
 	fi
 
@@ -79,11 +79,11 @@ get_role_index_from_json() {
 
 	for k in ${roles_obj}; do
 		local rname
-		json_select "$k"
+		json_select $k
 		json_get_var rname name
 		json_select ..
 
-		if [ "${rname}" != "Untrusted" ] && [ "${rname}" != "full_access" ]; then
+		if [ "${rname}" != "Untrusted" -a "${rname}" != "full_access" ]; then
 			num=$(( num + 1 ))
 		fi
 
@@ -102,10 +102,10 @@ get_uci_ref_index() {
 
 	index=0
 	config_load $CONFIGURATION
-	config_foreach get_index "$1" "$2"
+	config_foreach get_index $1 $2
 	val=$(cat ${USP_TEMP_FILE})
 
-	if [ -z "${val}" ]; then
+	if [ -z $val ]; then
 		val=0
 	fi
 
@@ -121,7 +121,7 @@ validate_obuspa_section()
 		'trust_cert:file' \
 		'client_cert:file' \
 		'interface:string' \
-		'ifname:string' \
+		'ifname:string:br-lan' \
 		'debug:bool:false' \
 		'prototrace:bool:false' \
 		'log_level:uinteger' \
@@ -223,37 +223,25 @@ validate_mqtt_client_section()
 		'ConnectRetryMaxInterval:uinteger:60'
 }
 
-validate_challenge_section()
-{
-	uci_validate_section ${CONFIGURATION} challenge "${1}" \
-		'Enable:bool:true' \
-		'Alias:string' \
-		'Description:string' \
-		'role_name:string' \
-		'Role:string' \
-		'Value:string' \
-		'Retries:uinteger:3' \
-		'LockoutPeriod:uinteger:0'
-}
-
 get_oui_from_db() {
-	db -q get device.deviceinfo.ManufacturerOUI
+	local oui="$(db get device.deviceinfo.ManufacturerOUI)"
+
+	echo "${oui}"
 }
 
 get_serial_from_db() {
-	db -q get device.deviceinfo.SerialNumber
+	local serial="$(db get device.deviceinfo.SerialNumber)"
+
+	# this can encoded further
+	echo "${serial}"
 }
 
 publish_endpoint() {
 	local AgentEndpointID serial oui user pass
-
-	if ! uci -q get obuspa.localmqtt; then
-		log "Remote mqtt broker configured, skip publishing endpoint"
-		return 0;
-	fi
+	local opt=""
 
 	# return if mosquitto_pub is not present
-	if [ ! "$(command -v mosquitto_pub)" ]; then
+	if [ ! "$(which mosquitto_pub)" ]; then
 		log "mosquitto_pub not present can't publish EndpointID"
 		return 0;
 	fi
@@ -268,24 +256,22 @@ publish_endpoint() {
 	fi
 
 	config_get user localmqtt Username
+	if [ -n "${user}" ]; then
+		opt="-u ${user}"
+	fi
 	config_get pass localmqtt Password
+	if [ -n "${pass}" ]; then
+		opt="${opt} -P ${pass}"
+	fi
 
 	# publish Agent's EndpointID in mosquito broker for discovery by usp-js
 	# This is a work around till obuspa adds supports for mDNS discovery
-	if [ -n "${user}" ] && [ -n "${pass}" ]; then
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username, password"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}" -P "${pass}"
-	elif [ -n "${user}" ]; then
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username only"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}"
-	else
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}"
-	fi
+	log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
+	mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" ${opt}
 }
 
 configure_localagent() {
-	local Enable EndpointID
+	local Enable ParameterName EndpointID
 
 	validate_localagent_section 'localagent' || {
 		log "Validation of localagent section failed"
@@ -302,33 +288,33 @@ configure_localagent() {
 configure_controller() {
 	local EndpointID Enable AssignedRole PeriodicNotifInterval PeriodicNotifTime USPNotifRetryMinimumWaitInterval
 	local USPNotifRetryIntervalMultiplier ControllerCode Protocol Destination coap_host coap_path coap_port
-	local Reference Topic mqtt stomp assigned_role_name ParameterName
+	local Reference Topic mqtt stomp assigned_role_name
 
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
 		return 1;
 	}
 
-	if [ -z "${EndpointID}" ] || [ -z "${Protocol}" ]; then
+	if [ -z "${EndpointID}" -o -z "${Protocol}" ]; then
 		log "controller:: EndpointID id and Protocol cannot be empty"
 		return 1;
 	fi
 
-	if [ -z "${stomp}" ] && [ -z "${Reference}" ] && [ -z "${mqtt}" ] && [ -z "${coap_path}" ]; then
+	if [ -z "${stomp}" -a -z "${Reference}"  -a -z "${mqtt}" -a -z "${coap_path}" ]; then
 		log "controller:: Invalid configuration"
 		return 1;
 	fi
 
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp "${stomp}")
+			val=$(get_uci_ref_index stomp ${stomp})
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred stomp section"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt "${mqtt}")
+			val=$(get_uci_ref_index mqtt ${mqtt})
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred mqtt section"
 				return 1;
@@ -346,7 +332,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 	else
 		if [ -n "${assigned_role_name}" ]; then
-			AssignedRole=$(get_role_index "${assigned_role_name}")
+			AssignedRole=$(get_role_index ${assigned_role_name})
 			db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 		fi
 	fi
@@ -387,7 +373,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Alias "cpe-${_pnum}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Enable "${Enable}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.ParameterName "${param}"
-		_pnum=$(( _pnum + 1 ))
+		_pnum=$(( ${_pnum} + 1 ))
 	done
 
 	db_set
@@ -402,13 +388,12 @@ configure_subscription(){
 		return 1;
 	}
 
-	if [ -z "${Recipient}" ] && [ -z "${controller}" ]; then
+	if [ -z "${Recipient}" -a -z "${controller}" ]; then
 		log "No recipient for subscription"
-		return 1;
 	fi
 
 	if [ -z "${Recipient}" ]; then
-		val=$(get_uci_ref_index controller "${controller}")
+		val=$(get_uci_ref_index controller ${controller})
 		if [ "${val}" -eq 0 ]; then
 			log "Not able to find the referred controller section"
 				return 1;
@@ -427,12 +412,26 @@ configure_subscription(){
 	db_set Device.LocalAgent.Subscription.${subs_num}.Recipient "${Recipient}"
 }
 
+validate_challenge_section()
+{
+	uci_validate_section ${CONFIGURATION} challenge "${1}" \
+		'Enable:bool:true' \
+		'Alias:string' \
+		'Description:string' \
+		'role_name:string' \
+		'Role:string' \
+		'Value:string' \
+		'Retries:uinteger:3' \
+		'LockoutPeriod:uinteger:0'
+}
+
 check_json_load()
 {
 	local ret=0
 	if [ -f "${role_def_file}" ]; then
 		json_init
-		if json_load_file "${role_def_file}" 2>&1 |grep -q Failed; then
+		json_load_file "${role_def_file}" 2>&1 |grep -q Failed
+		if [ $? -eq 0 ]; then # In case of invalid json file
 			log "failed to load [${role_def_file}]"
 			ret=1
 		fi
@@ -444,7 +443,7 @@ check_json_load()
 get_role_index() {
 	local role="Device.LocalAgent.ControllerTrust.Role"
 	local idx=0
-	local role_name="$*"
+	local role_name="${@}"
 
 	case "${role_name}" in
 	'full_access')
@@ -456,9 +455,10 @@ get_role_index() {
 	 *)
 		local ji=0
 
-		ji=$(check_json_load)
-		if [ "${ji}" -eq 0 ]; then
-			get_role_index_from_json "${role_name}"
+		check_json_load
+		if [ $? -eq 0 ]; then
+			get_role_index_from_json ${role_name}
+			ji=$?
 		fi
 		idx=$(( ji + 2 )) # Add predefined roles
 	 esac
@@ -474,7 +474,7 @@ configure_challenges() {
 		exit 1;
 	}
 
-	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
+	if [ -z "${role_name}" -a -z "${Role}" ]; then
 		log "Either role_name or Role must defined for a challenge";
 		return 1;
 	fi
@@ -487,10 +487,10 @@ configure_challenges() {
 	fi
 
 	if [ -z "${Role}" ]; then
-		Role=$(get_role_index "${role_name}")
+		Role=$(get_role_index ${role_name})
 	fi
 
-	if [ -z "${Alias}" ] && [ -n "${role_name}" ]; then
+	if [ -z "${Alias}" -a -n "${role_name}" ]; then
 		Alias=${role_name}
 	fi
 
@@ -512,14 +512,14 @@ configure_mtp() {
 
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp "${stomp}")
+			val=$(get_uci_ref_index stomp ${stomp})
 			if [ "${val}" -eq 0 ]; then
 				log "Referred stomp section not found"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt "${mqtt}")
+			val=$(get_uci_ref_index mqtt ${mqtt})
 			if [ "${val}" -eq 0 ]; then
 				log "Referred mqtt section not found"
 				return 1;
@@ -583,7 +583,7 @@ configure_stomp_connection() {
 
 configure_mqtt_client(){
 	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion KeepAliveTime
-	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier ClientID
+	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier
 
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
@@ -617,9 +617,11 @@ configure_mqtt_client(){
 
 configure_obuspa() {
 	local enabled trust_cert ifname interface debug prototrace log_level db_file log_dest role_file
-	local client_cert
 
-	validate_obuspa_section "global"
+	validate_obuspa_section "global" || {
+		log "Validation of global section failed"
+		return 1;
+	}
 
 	role_def_file="${role_file}"
 
@@ -630,98 +632,72 @@ configure_obuspa() {
 		procd_set_param stderr 1
 	fi
 
-	if [ "${debug}" -eq 1 ] && [ "${prototrace}" -eq 1 ]; then
+	if [ "${debug}" -eq 1 -a "${prototrace}" -eq 1 ]; then
 		procd_append_param command -p
 	fi
 
-	if [ "${debug}" -eq 1 ] && [ -n "${log_level}" ]; then
-		procd_append_param command -v "${log_level}"
+	if [ "${debug}" -eq 1 -a -n "${log_level}" ]; then
+		procd_append_param command -v ${log_level}
 	fi
 
 	if [ -n "${log_dest}" ]; then
-		procd_append_param command -l "${log_dest}"
+		procd_append_param command -l ${log_dest}
 	fi
 
 	if [ -n "${interface}" ]; then
-		network_get_physdev ifname "${interface}"
+		network_get_physdev ifname ${interface}
 	fi
 
-	if [ -n "${ifname}" ]; then
-		procd_set_param env USP_BOARD_IFNAME="${ifname}"
-		# Set this variable for root user and obuspa -c tool
-		if [ -f "${PROFILE}" ]; then
-			if grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}; then
-				if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
-					sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
-				fi
-			fi
-		fi
-		echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
-	else
-		if [ -f "$PROFILE" ]; then
-			if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
+	# Set this variable for root user and obuspa -c tool
+	if [ -f "${PROFILE}" ]; then
+		grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}
+		if [ "$?" -ne 0 ]; then
+			grep -q "export USP_BOARD_IFNAME" ${PROFILE}
+			if [ "$?" -eq 0 ]; then
 				sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
 			fi
+			echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
 		fi
+	else
+		echo "export USP_BOARD_IFNAME=${ifname}" > ${PROFILE}
 	fi
 
 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f "${db_file}"
+		procd_append_param command -f ${db_file}
 	fi
 
 	if [ -n "${trust_cert}" ]; then
 		update_keep "${trust_cert}"
 		if [ -f "${trust_cert}" ]; then
-			procd_append_param command -t "${trust_cert}"
+			procd_append_param command -t ${trust_cert}
 		fi
 	fi
 
 	if [ -n "${client_cert}" ]; then
 		update_keep "${client_cert}"
 		if [ -f "${client_cert}" ]; then
-			procd_append_param command -a "${client_cert}"
+			procd_append_param command -a ${client_cert}
 		fi
 	fi
+
+	procd_set_param env USP_BOARD_IFNAME=${ifname}
 }
 
 # Create factory reset file
 db_init() {
 	# Load configuration
 	config_load $CONFIGURATION
-
+	config_foreach configure_obuspa obuspa
 	config_foreach configure_controller controller
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_localagent localagent
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mtp mtp
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_stomp_connection stomp
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mqtt_client mqtt
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_subscription subscription
-	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_challenges challenge
-	[ "$?" -ne 0 ] && return 1;
 
 	db_set Internal.Reboot.Cause "LocalFactoryReset"
-	return 0;
-}
-
-register_service()
-{
-	procd_open_instance ${CONFIGURATION}
-	procd_set_param command ${PROG}
-	procd_append_param command -r ${PARAM_FILE}
-
-	configure_obuspa
-	procd_set_param respawn \
-			"${respawn_threshold:-5}" \
-			"${respawn_timeout:-10}" "${respawn_retry:-3}"
-
-	procd_set_param watch usp.raw
-	procd_close_instance
 }
 
 service_running() {
@@ -731,19 +707,24 @@ service_running() {
 start_service() {
 	local enabled
 
-	mkdir -p /tmp/obuspa/
 	config_load obuspa
-	config_get_bool enabled global enabled 0
+	config_get enabled global enabled
 
 	if [ "${enabled}" -eq 0 ]; then
 		log "OBUSPA not enabled"
 		return 0;
 	fi
 
+	procd_open_instance ${CONFIGURATION}
+	procd_set_param command ${PROG}
 	db_init
-	[ "$?" -ne 0 ] && return 1;
+	procd_append_param command -r ${PARAM_FILE}
+	procd_set_param respawn \
+			${respawn_threshold:-5} \
+			${respawn_timeout:-10} ${respawn_retry:-3}
 
-	register_service
+	procd_set_param watch usp.raw
+	procd_close_instance
 }
 
 stop_service() {
@@ -752,10 +733,10 @@ stop_service() {
 	config_load obuspa
 	config_get db_file global db_file
 
-	${PROG} -c stop >/dev/null 2>&1
+	${PROG} -c stop 2>&1 >/dev/null
 
 	if [ -z "${db_file}" ]; then
-		db_file="/tmp/obuspa/usp.db"
+		db_file="/tmp/usp.db"
 	fi
 
 	[ -f "${db_file}" ] && rm -f ${db_file}
@@ -790,14 +771,4 @@ service_triggers() {
 			json_add_int "" "2000"
 		json_close_array
 	procd_close_trigger
-
-	procd_open_validate
-	validate_obuspa_section
-	validate_localagent_section
-	validate_controller_section
-	validate_subscription_section
-	validate_mtp_section
-	validate_stomp_connection_section
-	validate_mqtt_client_section
-	procd_close_validate
 }

paho-mqtt-c/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2020 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=lib-paho-mqtt
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=edl-v10
+PKG_LICENSE_FILES:=LICENSE
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/lib-paho-mqtt
+	CATEGORY:=Libraries
+	DEPENDS:=+libopenssl
+	TITLE:=package for mqtt stuff
+endef
+
+
+define Package/lib-paho-mqtt/description
+	a library
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
+endef
+
+define	Package/lib-paho-mqtt/install
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,lib-paho-mqtt))

qosmngr/files/etc/init.d/qos

@@ -28,11 +28,6 @@ boot() {
 	start
 }
 
-service_running() {
-	setup_qos
-	start
-}
-
 service_triggers() {
 	procd_add_reload_trigger qos
 }

qosmngr/files/lib/qos/broadcom.sh

@@ -842,7 +842,7 @@ configure_classify() {
 	fcctl flush
 }
 
-pre_configure_queue() {
+configure_queue() {
 	# Delete queues
 	rm -rf /tmp/qos/queue_stats
 
@@ -862,9 +862,7 @@ pre_configure_queue() {
 		touch /tmp/qos/$intf/q_order
 		touch /tmp/qos/$intf/q_precedence
 	done
-}
 
-configure_queue() {
 	# Load UCI file
 	config_load qos
 	config_foreach handle_q_order queue
@@ -915,7 +913,6 @@ configure_qos() {
 	#queue configuration is being done after shaper configuration,
 	#If port shapingrate configuration on DISC device is called after queue configuration then
 	#driver overwrites the queue shaping rate with default value of port shaping rate.
-	pre_configure_queue
 	configure_shaper
 	configure_queue
 	configure_policer
@@ -935,7 +932,6 @@ reload_qos() {
 	elif [ "$service_name" == "shaper" ]; then
 		configure_shaper
 	elif [ "$service_name" == "queue" ]; then
-		pre_configure_queue
 		configure_queue
 	elif [ "$service_name" == "classify" ]; then
 		configure_classify

sulu/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu
-PKG_VERSION:=0.2.29
+PKG_VERSION:=0.2.28
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/sulu.git
-PKG_SOURCE_VERSION:=5c722ca387ffdd28ac2a2e01f27dba12015fc2e7
+PKG_SOURCE_VERSION:=b861e90ed331fb8cba5ed8c9d9b9e9c859f60815
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
@@ -37,10 +37,7 @@ endef
 
 define Package/sulu/install
 	$(INSTALL_DIR) $(1)/sulu
-	$(INSTALL_DIR) $(1)/sulu/config
-	$(INSTALL_DIR) $(1)/etc/nginx/
 	$(CP) $(PKG_BUILD_DIR)/dist/* $(1)/sulu
-	$(CP) $(PKG_BUILD_DIR)/config/* $(1)/sulu/config
 	$(CP) ./files/* $(1)/
 endef
 

sulu/files/etc/nginx/conf.d/sulu.locations

@@ -1,18 +0,0 @@
-location /config/ {
-	autoindex on;
-	if ($request_method = 'OPTIONS') {
-		add_header 'Access-Control-Allow-Origin' '*';
-		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';
-		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type,Range';
-		add_header 'Access-Control-Max-Age' 1728000;
-		add_header 'Content-Type' 'text/plain; charset=utf-8';
-		add_header 'Content-Length' 0;
-		return 204;
-	}
-	if ($request_method = 'GET') {
-		add_header 'Access-Control-Allow-Origin' '*' always;
-		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS' always;
-		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type,Range' always;
-		add_header 'Access-Control-Expose-Headers' 'Content-Length,Content-Range' always;
-	}
-}

sulu/files/etc/uci-defaults/90-sulu-set-nginx-conf

@@ -7,4 +7,3 @@ uci -q add_list nginx._sulu.listen='8080'
 uci -q add_list nginx._sulu.listen='[::]:8080'
 uci -q set nginx._sulu.root='/sulu'
 uci -q set nginx._sulu.server_name='_sulu'
-uci -q add_list nginx._sulu.include='conf.d/sulu.locations'

swmodd/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.0.23
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f169ab825295e1e0bb414c7bbc921fab2ef9ccfa
+PKG_SOURCE_VERSION:=0d047fc3e8ed15cde87e8781e00952aa43d4d558
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -27,6 +27,7 @@ define Package/swmodd
   SUBMENU:=TRx69
   TITLE:= Software Modules Daemon
   DEPENDS:=+libuci +libubox +ubus +libuuid +libbbf_api +opkg +libcurl \
+	    +PACKAGE_crun:crun +PACKAGE_crun:cgroupfs-mount \
 	    +PACKAGE_liblxc:liblxc +PACKAGE_liblxc:cgroupfs-mount \
 	    +@BUSYBOX_CONFIG_BUSYBOX +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT
 endef
@@ -48,6 +49,14 @@ MAKE_FLAGS += \
 	SWMOD_LXC="yes"
 endif
 
+ifeq ($(CONFIG_PACKAGE_crun),y)
+MAKE_FLAGS += \
+	SWMOD_CRUN="yes"
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include/libcrun
+endif
+
 ifeq ($(CONFIG_SWMOD_HOST_IS_EXECENV),y)
 MAKE_FLAGS += \
 	SWMOD_HOST_IS_EXECENV="yes"

ubus-mqtt/Makefile

@@ -0,0 +1,55 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ubus-mqtt
+PKG_VERSION:=14.20.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_URL:=https://dev.iopsys.eu/3rdparty/ubus-mqtt.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=NONE
+
+include $(INCLUDE_DIR)/package.mk
+
+CONFIGURE_VARS += \
+	BUILD_CC="$(HOSTCC)" \
+	TARGET_CC="$(TARGET_CC)"
+
+TARGET_CFLAGS += \
+	-L$(STAGING_DIR)/usr/lib -I$(STAGING_DIR)/usr/include
+
+define Package/ubus-mqtt
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=ubus-mqtt - a ubus replicator for mqtt
+  URL:=http://www.alleato.se/
+  MAINTAINER:=Martin Assarsson
+  DEPENDS:=+jansson +libpthread +libmosquitto +libopenssl +ubus +libubox
+endef
+
+define Package/ubus-mqtt/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/src/ubus-mqtt $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) files/ubus-mqtt.init $(1)/etc/init.d/ubus-mqtt
+endef
+
+define Package/ubus-mqtt/postinst
+#!/bin/sh
+#/etc/init.d/ubus-mqtt enable
+#/etc/init.d/ubus-mqtt restart
+endef
+
+$(eval $(call BuildPackage,ubus-mqtt))
+
+

ubus-mqtt/files/ubus-mqtt.init

@@ -0,0 +1,20 @@
+#!/bin/sh /etc/rc.common
+#
+# Start the ubus-mqtt
+#
+
+START=80
+PID_FILE=/var/state/ubus-mqtt.pid
+
+start() {
+        start-stop-daemon -S -b -m -p $PID_FILE -x /usr/sbin/ubus-mqtt
+}
+ 
+stop() {
+        start-stop-daemon -K -p $PID_FILE
+}  
+             
+restart() {
+        stop
+        start
+}

uspd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=2.2.0
+PKG_VERSION:=2.1.44
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a0c6b7e1b09987289e06da36124296ec9e792f77
+PKG_SOURCE_VERSION:=b5e555ff6643e2c39fed9ffda47015e36436985a
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

wfadatad/Makefile

@@ -5,16 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfadatad
-PKG_VERSION:=6.10.6
+PKG_VERSION:=6.10.2
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f6f9f0b7aab4910b27036e9a375b018c22d6b726
+PKG_SOURCE_VERSION:=aaeed1df50a22bd391e5b1609e946991157308f4
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=PROPRIETARY IOPSYS
@@ -55,25 +52,11 @@ ifeq ($(CONFIG_WFA_DELM_STANDALONE),y)
 MAKE_FLAGS += CONFIG_WFA_DELM_STANDALONE=y
 endif
 
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/wfadatad/ $(PKG_BUILD_DIR)/
-endef
-endif
-
 MAKE_PATH:=src