owsd: update pkg to include vhost memory managment update

This reverts commit 44164d950b.

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.3.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=637aa9ef231f81d195f7a1b67c70af445ade7fee
+PKG_SOURCE_VERSION:=5a5c94b289c79bc3a635b8d742dd9b73dcc0615f
 PKG_NAME:=dectmngr2
 
 

easy-soc-libs/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9b7accf0ac4f7c8010fb06ba83df9e53264b429a
+PKG_SOURCE_VERSION:=c656cd47a9f911cfe3946e3d4a374b4ae9e5d801
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

owsd/Config.in

@@ -1,9 +1,9 @@
 choice
-	prompt "Select Bus"
+	prompt "Select IPC Bus"
 	default OWSD_USE_UBUS
 	depends on PACKAGE_owsd
 	help
-		Select which bus to compile owsd for
+		Select which IPC bus to compile owsd for
 
 config OWSD_USE_DBUS
 	bool "Use DBUS"
@@ -15,3 +15,11 @@ config OWSD_USE_DBUS_UBUS
 	bool "Use UBUS and DBUS"
 
 endchoice
+
+config OWSD_UPROXYD
+	bool "Enable UBUS Proxy Daemon"
+	default y if OWSD_USE_UBUS || OWSD_USE_DBUS_UBUS
+        help
+          Enabling uproxyd automates detection of other
+	  UBUS-X enabled devices in the network
+

owsd/Makefile

@@ -5,25 +5,27 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.1
+PKG_VERSION:=1.1.2
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
+PKG_SOURCE_VERSION:=da5bcdbaa96d01e878d921c90c34a04bbdfca973
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
-PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS
+PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS CONFIG_OWSD_UPROXYD
 
 USE_UBUS-y:=-DWSD_HAVE_UBUS=ON
 USE_DBUS-y:=-DWSD_HAVE_DBUS=ON
 USE_BOTH-y:=${USE_UBUS-y} ${USE_DBUS-y}
+USE_UPROXYD-y:=-DOWSD_UPROXYD=ON
 
 CMAKE_OPTIONS:=${USE_UBUS-${CONFIG_OWSD_USE_UBUS}} \
 	${USE_DBUS-${CONFIG_OWSD_USE_DBUS}} \
-	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}}
+	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}} \
+	${USE_UPROXYD-${CONFIG_OWSD_UPROXYD}}
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
@@ -51,14 +53,14 @@ endef
 define Package/owsd/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/owsd $(1)/usr/bin/owsd
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/uproxyd
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/owsd.init $(1)/etc/init.d/owsd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) ./files/owsd.config $(1)/etc/config/owsd
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_BIN) ./files/owsd.hotplug $(1)/etc/hotplug.d/iface/55-owsd
-#	$(INSTALL_DIR) $(1)/etc/uci-defaults
-#	$(INSTALL_BIN) ./files/owsd.uci_default $(1)/etc/uci-defaults/55-owsd-interfaces
 endef
 
 define Package/owsd-testdata

owsd/files/owsd.init

@@ -150,6 +150,7 @@ validate_owsd_iface() {
 		'origin:list(string)' \
 		'whitelist_interface_as_origin:bool:0' \
 		'whitelist_dhcp_domains:bool:0' \
+		'whitelist_all_origins:bool:0' \
 		'ipv6:bool:1' \
 		'ipv6only:bool:0' \
 		'linklocal:bool:0' \
@@ -163,7 +164,7 @@ validate_owsd_iface() {
 }
 
 parse_owsd_iface() {
-	local port interface whitelist_interface_as_origin whitelist_dhcp_domains ipv6 ipv6only linklocal
+	local port interface whitelist_interface_as_origin whitelist_dhcp_domains whitelist_all_origins ipv6 ipv6only linklocal
 	local cert key ca
 	local restrict_to_user
 	local ubusx_acl
@@ -191,9 +192,23 @@ parse_owsd_iface() {
 
 	}
 
+	origin_whitelist_all() {
+		[ "$1" = "*" ] && echo "true"
+	}
+
 	append_whitelists () {
 		config_list_foreach "$1" "origin" append_origin
 
+		whitelist=$(config_list_foreach "$1" "origin" origin_whitelist_all)
+
+		[ -n "$whitelist" ] && whitelist_all_origins=1
+
+		if [ "$whitelist_all_origins" -eq 1 ]; then
+			procd_append_param command -O
+			whitelist_dhcp_domains=1
+			whitelist_interface_as_origin=1
+		fi
+
 		if [ "$whitelist_dhcp_domains" -eq 1 ]; then
 			for domain in $DHCP_DOMAINS; do
 				append_origin_parts "${http}" "${domain}" "${port}"
@@ -301,11 +316,15 @@ start_service() {
 	procd_set_param respawn
 
 	procd_close_instance
-	# Start uproxyd
-	procd_open_instance
-	procd_set_param command $UPROXYD
-	procd_set_param respawn
-	procd_close_instance
+
+	if [ "${enable}" -eq 1 ]; then
+		# Start uproxyd
+		procd_open_instance
+		procd_set_param command $UPROXYD
+		procd_set_param respawn
+		procd_close_instance
+	fi
+
 }
 
 #stop_service()

owsd/files/owsd.uci_default

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-MGMT_INTERFACES=""
-OWSD_INTERFACES=""
-NOT_DEFAULT=0
-
-mgmt_interfaces() {
-	local interface=$1
-	[ "$interface" == "loopback" ] && return
-	[ "$interface" == "lan" ] && return
-	[ "$interface" == "wan" ] && return
-	[ "$interface" == "wan6" ] && return
-
-	local type proto
-	config_get type $interface type
-	config_get proto $interface proto "none"
-	[ "$type" == "bridge" -a "$proto" == "none" ] && return
-
-	local is_lan
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] && return
-
-	local ifname
-	config_get ifname $interface ifname
-	[ "${ifname:0:1}" == "@" ] && return
-
-	MGMT_INTERFACES="$MGMT_INTERFACES $interface"
-}
-
-owsd_interfaces() {
-	local config=$1
-	local interface
-	config_get interface $config interface
-	[ "$interface" == "loopback" ] && return
-	[ "$interface" == "lan" ] && return
-	[ "$interface" == "wan" ] && return
-	[ "$interface" == "wan6" ] && return
-
-	OWSD_INTERFACES="$OWSD_INTERFACES $interface"	
-
-	NOT_DEFAULT=1
-}
-
-not_owsd() {
-	local interface=$1
-	local there=0
-	for owsd in $OWSD_INTERFACES; do
-		if [ "$interface" == "$owsd" ]; then
-			there=1
-			break
-		fi
-	done
-	return $there
-}
-
-config_load network
-config_foreach mgmt_interfaces interface
-
-config_load owsd
-config_foreach owsd_interfaces owsd-listen
-
-if [ $NOT_DEFAULT -eq 0 ]; then
-	for mgmt in $MGMT_INTERFACES; do
-		if $(not_owsd $mgmt); then
-			uci -q set owsd.$mgmt=owsd-listen
-			uci -q set owsd.$mgmt.port=80
-			uci -q set owsd.$mgmt.interface="$mgmt"
-			uci -q set owsd.$mgmt.ipv6="on"
-			uci -q set owsd.$mgmt.whitelist_interface_as_origin="1"
-			uci -q set owsd.$mgmt.origin="*"
-
-			uci -q set owsd.$mgmt"_8080"=owsd-listen
-			uci -q set owsd.$mgmt"_8080".port=8080
-			uci -q set owsd.$mgmt"_8080".interface="$mgmt"
-			uci -q set owsd.$mgmt"_8080".ipv6="on"
-			uci -q set owsd.$mgmt"_8080".whitelist_interface_as_origin="1"
-			uci -q set owsd.$mgmt"_8080".origin="*"
-
-			uci commit owsd
-		fi
-	done
-fi
-
-exit 0
-

questd/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=questd
 PKG_VERSION:=4.1.0
 
-PKG_SOURCE_VERSION:=f354a1a9976c16bca2fb7d6cb61783ebdc650840
+PKG_SOURCE_VERSION:=3c7c4da8cdf14e4abb75a41e3ef9f2eddc9d75ae
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -59,7 +59,6 @@ define Package/questd/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/graphd $(1)/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
 endef

uspd/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.1
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e8ee6a35751e661dd621b8b5c4cb788fe2081f58
+PKG_SOURCE_VERSION:=50a4346d518fd80d22cd9694ee3c1dba336bd072
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 

voice-client/files/etc/init.d/voice_client

@@ -17,8 +17,8 @@ START=60
 USE_PROCD=1
 
 # Some global variables
-SERIAL=$(getSerial)
-BASEMAC=$(getBaseMAC)
+SERIAL="$(getSerial)"
+BASEMAC="$(getBaseMAC)"
 MODULENAME=voice
 USERAGENT="Inteno_${SERIAL}_${BASEMAC}"
 
@@ -32,7 +32,10 @@ ASTERISKDIR=/etc/asterisk
 WORKDIR=/tmp/$MODULENAME.$$
 MD5SUMSFILE=/tmp/$MODULENAME-sums.$$
 
-# Whitespace separated list of $(getChannelName) feature access codes
+LINENAME="$(getLineName)"
+CHANNELNAME="$(getChannelName)"
+
+# Whitespace separated list of $CHANNELNAME feature access codes
 CHANNEL_FAC=
 
 #TODO: go through templates, check usage
@@ -82,7 +85,7 @@ TMPL_ACL=$TEMPLATEDIR/acl.conf.TEMPLATE
 TMPL_CONFBRIDGE=$TEMPLATEDIR/confbridge.conf.TEMPLATE
 TMPL_UDPTL=$TEMPLATEDIR/udptl.conf.TEMPLATE
 
-TMPL_CHANNEL=$TEMPLATEDIR/$(getLineName).conf.TEMPLATE
+TMPL_CHANNEL=$TEMPLATEDIR/$LINENAME.conf.TEMPLATE
 TMPL_CHANNEL_LINE=$TEMPLATEDIR/tel_line.TEMPLATE
 
 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE
@@ -182,7 +185,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/sip_registrations.tmp	$WORKDIR/sip_registrations.conf
 	mv $WORKDIR/sip_providers.tmp		$WORKDIR/sip_providers.conf
 	mv $WORKDIR/sip_users.tmp		$WORKDIR/sip_users.conf
-	mv $WORKDIR/$(getLineName).tmp		$WORKDIR/$(getLineName).conf
+	mv $WORKDIR/$LINENAME.tmp		$WORKDIR/$LINENAME.conf
 	mv $WORKDIR/extensions.tmp		$WORKDIR/extensions.conf
 	mv $WORKDIR/codecs.tmp			$WORKDIR/codecs.conf
 	mv $WORKDIR/rtp.tmp			$WORKDIR/rtp.conf
@@ -337,7 +340,7 @@ read_lines()
 	for i in $call_lines ; do
 		case $i in
 			''|*[!0-9]*)	lines=$lines"$i&" ;;
-			*) 				lines=$lines"$(getChannelName)/$i&" ;;
+			*) 				lines=$lines"$CHANNELNAME/$i&" ;;
 		esac
 		
 	done
@@ -1032,9 +1035,9 @@ configure_queue()
 	do
 		local out=""
 		re='^[0-9]+$'
-		num=${member#$(getLineName)}
+		num=${member#$LINENAME}
 		if [ -z "${num##[0-9]*}" ] ; then
-			out="$(getChannelName)/$num"
+			out="$CHANNELNAME/$num"
 		else
 			local sip_user
 			config_get sip_user $member user
@@ -1478,6 +1481,7 @@ configure_extensions()
 #
 configure_extensions_provider()
 {
+	echo COMES HERE
 	local enabled
 	local displayname
 	local user
@@ -1688,7 +1692,7 @@ configure_extensions_provider()
 	echo "exten => $user,n(norewrite),NoOp()">>							$tmp
 
 	# read a list of lines that should be dialled on incoming calls
-	incoming_lines=$(read_lines $1)
+	incoming_lines="$(read_lines $1)"
 	config_get call_queue $1 call_queue
 	config_get call_ivr $1 call_ivr
 	if [ -n "$incoming_lines" ]; then
@@ -1737,7 +1741,7 @@ configure_tel_line_extension()
 	local cbbs_retrytime
 	local cbbs_waittime
 	local mailbox
-	local line_name=$(getLineName)
+	local line_name=$LINENAME
 	
 	line=${1:${#line_name}}
 	config_get extension $1 extension
@@ -1842,11 +1846,11 @@ configure_codecs()
 }
 
 #
-# Configure default settings for $(getLineName).conf
+# Configure default settings for $LINENAME.conf
 #
 configure_tel()
 {
-	echo "Configuring $(getChannelName)"
+	echo "Configuring $CHANNELNAME"
 	local jbenable
 	local jbforce
 	local jbmaxsize
@@ -1873,29 +1877,29 @@ configure_tel()
 		dialoutmsec=4000
 	fi
 
-	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$(getLineName).tmp
-	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$(getLineName).tmp
-	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$(getLineName).tmp
-	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$(getLineName).tmp
-	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$(getLineName).tmp
-	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$(getLineName).tmp
-	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$(getLineName).tmp
-	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$LINENAME.tmp
+	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$LINENAME.tmp
+	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$LINENAME.tmp
+	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$LINENAME.tmp
+	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$LINENAME.tmp
+	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$LINENAME.tmp
+	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$LINENAME.tmp
+	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$LINENAME.tmp
 
 	if [ "$dtmfmode" == "compatibility" ] ; then
 		dtmfcompatibility="1"
 	else
 		dtmfcompatibility="0"
 	fi
-	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$(getLineName).tmp
+	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$LINENAME.tmp
 }
 
 #
-# Configure settings for individual line in $(getLineName).conf
+# Configure settings for individual line in $LINENAME.conf
 #
 configure_tel_line()
 {
-	echo "Configuring $(getChannelName) line $1"
+	echo "Configuring $CHANNELNAME line $1"
 	local extension
 	local sip_provider
 	local codecs
@@ -1917,11 +1921,9 @@ configure_tel_line()
 	config_get clir $1 clir
 
 	#If line is configured with no sip_provider, or sip_provider is disabled, use local_extensions context
-	[ -n "$sip_provider" ] && {
-		config_get sip_provider_user $sip_provider user
-		config_get sip_provider_enabled $sip_provider enabled
-	}
-	if [ -z "$sip_provider" -o "$sip_provider" == "-" -o -z "$sip_provider_enabled" -o "$sip_provider_enabled" == "0" -o -z "$sip_provider_user" ] ; then
+	config_get sip_provider_user $sip_provider user
+	config_get sip_provider_enabled $sip_provider enabled
+	if [ "$sip_provider" == "-" -o -z "$sip_provider_enabled" -o "$sip_provider_enabled" == "0" -o -z "$sip_provider_user" ] ; then
 		sip_provider="local_extensions"
 	fi
 
@@ -1954,7 +1956,7 @@ configure_tel_line()
 	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/tel_line.tmp
 	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/tel_line.tmp
 	sed -i "s/|CLIR|/$clir/"				$WORKDIR/tel_line.tmp
-	sed -i "s/|LINE_NAME|/$(getLineName)/"			$WORKDIR/tel_line.tmp
+	sed -i "s/|LINE_NAME|/$LINENAME/"			$WORKDIR/tel_line.tmp
 
 	#Configure CHANNEL line with codecs according to the SIP line settings
 #	local is_fax
@@ -1965,7 +1967,7 @@ configure_tel_line()
 # 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/tel_line.tmp
 # 	fi
 
-	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$(getLineName).tmp
+	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$LINENAME.tmp
 	rm -f							$WORKDIR/tel_line.tmp
 }
 
@@ -2064,57 +2066,15 @@ pbx_fix_ownership()
 	chown $ASTUSER:$ASTGROUP -R $ASTDIRSRECURSIVE
 }
 
-# Set voice_client.LINE_x.sip_account correctly as per "voice_client.sipX.call_lines"
-set_line_sip_account()
-{
-	local tel_line=$1
-	local old_sip_account=
-	local new_sip_account=
-	local line_name=$(getLineName)
-	local line_name_len=${#line_name}
-	local lnum=${tel_line:${line_name_len}}
-	local chan_name=$(getChannelName)
-	local ___type="sip_service_provider"
-	local section cfgtype call_lines chan_num
-
-	config_get old_sip_account $tel_line sip_account
-
-	# Note: On Intel platform, tel_line's section name starts with 0, e.g. tapi0.
-	# But channel index in voice_client.sipX.call_lines starts with 1, e.g. TAPI/1
-	if [ "$line_name" == "tapi" ]; then
-		chan_num=$((lnum+1))
-	else
-		chan_num=$lnum
-	fi
-
-	for section in ${CONFIG_SECTIONS}; do
-		config_get cfgtype "$section" TYPE
-		[ -n "$___type" -a "x$cfgtype" != "x$___type" ] && continue
-		config_get call_lines "$section" call_lines
-		# Note: tel_line's section name starts with 0, e.g. tapi0 or brcm0.
-		# But channel index in voice_client.sipX.call_lines starts with 1, e.g. TAPI/1
-		[ -n "$call_lines" ] && echo "$call_lines" | grep -q "$chan_name/$chan_num" && {
-			# Append this sip_acount to the tel line
-			if [ -z "$new_sip_account" ]; then
-				new_sip_account="$section"
-			else
-				new_sip_account="$new_sip_account $section"
-			fi
-		}
-	done
-
-	[ "$old_sip_account" != "$new_sip_account" ] && uci_set voice_client $tel_line sip_account "$new_sip_account"
-}
-
 #
-# Calculate a name for each $(getLineName) line, depending on port type
+# Calculate a name for each $LINENAME line, depending on port type
 # and number. The name is used to make UI look better.
 #
 set_line_name()
 {
 	local maxlinenum=$2
 	local curname name_ix ix item lnum
-	local line_name=$(getLineName)
+	local line_name=$LINENAME
 	local line_name_len=${#line_name}
 	local tel_line=$1
 	
@@ -2202,12 +2162,6 @@ start_service() {
 	# Load config file
 	config_load voice_client
 
-	########################################################
-	# Set line sip_account according to sip accounts'
-	# settings
-	########################################################
-	config_foreach set_line_sip_account tel_line
-
 	########################################################
 	# Set line names according to board parameters
 	# and delete non-existing lines from voice_client config
@@ -2216,9 +2170,6 @@ start_service() {
 	config_foreach set_line_name tel_line $maxlinenum
 	uci_commit voice_client
 
-	# Reload the config since it has changed
-	config_load voice_client
-
 	#######################################
 	# Create temporary files from templates
 	#######################################
@@ -2229,7 +2180,7 @@ start_service() {
 	cp $TMPL_SIP			$WORKDIR/sip.tmp
 	cp $TMPL_RTP			$WORKDIR/rtp.tmp
 	cp $TMPL_STUN			$WORKDIR/res_stun_monitor.tmp
-	cp $TMPL_CHANNEL		$WORKDIR/$(getLineName).tmp
+	cp $TMPL_CHANNEL		$WORKDIR/$LINENAME.tmp
 	cp $TMPL_CODECS			$WORKDIR/codecs.tmp
 	cp $TMPL_VOICEMAIL		$WORKDIR/voicemail.tmp
 	cp $TMPL_DNSMGR			$WORKDIR/dnsmgr.tmp
@@ -2344,17 +2295,16 @@ stop_service() {
 
 reload_service() {
 	start
-	# turn off voice led; asterisk will turn it on if there is a registered account
+	#stop
+	# turn off voice led; asterisk will turn it on
+	# if there is a registered account
 	ubus call led.voice1 set '{"state":"off"}'
 
-	# FXS channel module must be reloaded before sip module. Otherwise some attributes like
-	# line's registration state which is updated by SIP module through callback might be
-	# reset.
-	asterisk -rx "$(getChipVendor) reload"
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
+	asterisk -rx "$(getChipVendor) reload"
 }
 
 service_triggers() {

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=8fe360e39fa71dbf5f7618afaba4b05da804981e
+PKG_SOURCE_VERSION:=5ab0a61b2d8dc34be0e0053670a13876e648f94b
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>