WIP: usp RBAC config for sulu

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,3 +1,7 @@
+if PACKAGE_libbbfdm
+
+menu "Configuration"
+
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -10,22 +14,24 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
+config BBF_TR181
+	bool "Enable TR-181 Data Model Support"
+	default y
+
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
 config BBF_TR143
 	bool "Enable TR-143 Data Model Support"
 	default y
 
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
 config BBFDM_ENABLE_JSON_PLUGIN
 	bool "Enable json plugin to extend datamodel"
-	default y
+	default n
 
 config BBFDM_ENABLE_DOTSO_PLUGIN
 	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255
+	default n
+endmenu
+endif

bbf/Makefile

@@ -0,0 +1,137 @@
+#
+# Copyright (C) 2021 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.1.2
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=0d04be3ad46f662db8cb83f41cf88da7256403c5
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for libbbfdm API
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
+define Package/libbbfdm
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CONFIGURE_ARGS += \
+	--enable-tr104
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
+
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-json-plugin
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-shared-library
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
+endef
+
+define Package/libbbfdm/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+endef
+
+define Package/libbbfdm/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))

bbfdm/Makefile

@@ -1,261 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.3.30
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=60171c88176bd0e8d8cb67ddea3cb4f40b834f17
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
-	    +BBF_TR471:obudpst
-endef
-
-define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (default)
-  VARIANT:=default
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  VARIANT:=openssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  VARIANT:=wolfssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
-		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
-		   +PACKAGE_libbbfdm:libbbfdm
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR143 data models
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-	-DBBF_WIFI_DATAELEMENTS=ON
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-endef
-
-define Package/libbbfdm/default/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-ifeq ($(CONFIG_BBF_TR143),y)
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-endif
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-endif
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-endif
-endef
-
-define Package/libbbfdm/default/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/json/input.json $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/bbfdm/bbfdm_services.sh $(1)/etc/bbfdm/
-endef
-
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
-endef
-
-Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	# Work around for backward compatibility
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
-endef
-
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))
-$(eval $(call BuildPackage,bbfdmd))
-
-$(eval $(call BuildPackage,userinterface))

bbfdm/files/etc/bbfdm/bbfdm_services.sh

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-BBFDMD="/usr/sbin/bbfdmd"
-
-bbfdm_add_service()
-{
-	local name path
-
-	name="${1}"
-	path="${2}"
-
-	if [ -z "${name}" -o -z "$path" ]; then
-		return 0;
-	fi
-
-	ubus call service add "{'name':'bbfdm.services','instances':{'$name':{'command':['$BBFDMD','-m','$path'], 'respawn': [0]}}}"
-}

bbfdm/files/etc/config/bbfdm

@@ -1,7 +0,0 @@
-
-config bbfdmd 'bbfdmd'
-	option enabled '1'
-	option loglevel '1'
-	option refresh_time '10'
-	option transaction_timeout '30'
-

bbfdm/files/etc/config/userinterface

@@ -1,3 +0,0 @@
-config userinterface 'global'
-	option enable '1'
-

bbfdm/files/etc/firewall.portmap

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.dnat -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Now add rules as per datamodel precedence shown below
-		## Non empty remote host, empty dport
-		## empty remote host, non empty dport
-		## empty remote host, empty dport
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

bbfdm/files/etc/firewall.userinterface

@@ -1,125 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="UI-REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ] || [ ! -f "/etc/config/nginx" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-delete_ui_firewall_rules() {
-	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-}
-
-configure_ui_firewall_rule() {
-	local sec="${1}"
-	local enabled access interface
-	local port=""
-
-	config_get_bool enabled "${sec}" uci_enable '1'
-	config_get access "${sec}" uci_access ""
-	config_get interface "${sec}" uci_interface ""
-
-	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
-		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
-		for item in ${port_list}; do
-			if [ -z "${item##[0-9]*}" ]; then
-				port="${item}"
-				break
-			fi
-		done
-
-		if [ -z "${port}" ]; then
-			return 0
-		fi
-
-		zone="zone_${interface}_input"
-		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		zone="zone_${interface}_output"
-		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-	fi
-}
-
-# Delete existing remote access rules
-delete_ui_firewall_rules
-
-config_load userinterface
-config_get_bool serv_enable global enable 1
-
-if [ "${serv_enable}" -eq "1" ]; then
-	config_load nginx
-	# Configure the User Interface rule
-	config_foreach configure_ui_firewall_rule server
-fi

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -1,92 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-BBFDM_TEMP_JSON="/tmp/bbfdm.json"
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enabled:bool:true' \
-		'sock:string' \
-		'debug:bool:false' \
-		'loglevel:uinteger:1' \
-		'refresh_time:uinteger:0' \
-		'transaction_timeout:uinteger:30' \
-		'subprocess_level:uinteger'
-}
-
-configure_bbfdmd()
-{
-	local enabled debug sock update
-	local jlog jrefresh jtimeout
-
-	update=0
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enabled}" -eq 0 ] && return 0
-	[ ! -f "${BBFDM_JSON_INPUT}" ] && return 0
-
-	jlog="$(jq '.daemon.config.loglevel' ${BBFDM_JSON_INPUT})"
-	if [ "\"${loglevel}\"" != "${jlog}" ]; then
-		update=1
-	fi
-
-	jrefresh="$(jq '.daemon.config.refresh_time' ${BBFDM_JSON_INPUT})"
-	if [ "\"${refresh_time}\"" != "${jrefresh}" ]; then
-		update=1
-	fi
-
-	jtimeout="$(jq '.daemon.config.transaction_timeout' ${BBFDM_JSON_INPUT})"
-	if [ "\"${transaction_timeout}\"" != "${jtimeout}" ]; then
-		update=1
-	fi
-
-	if [ "${update}" -eq "1" ]; then
-		echo "$(jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran}' ${BBFDM_JSON_INPUT})" > ${BBFDM_TEMP_JSON}
-		mv ${BBFDM_TEMP_JSON} ${BBFDM_JSON_INPUT}
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-
-	ubus call service state '{"name":"bbfdm.services", "spawn":true}'
-}
-
-stop_service()
-{
-	ubus call service state '{"name":"bbfdm.services", "spawn":false}'
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/init.d/userinterface

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	if [ ! -f "/etc/config/nginx" ]; then
-		return 0
-	fi
-
-	if [ "${enable}" -eq "1" ]; then
-		ubus call service state '{"name":"nginx", "spawn":true}'
-	else
-		ubus call service state '{"name":"nginx", "spawn":false}'
-	fi
-
-	# Inject firewall rules
-	procd_open_instance userinterface
-	/etc/firewall.userinterface
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface" "nginx"
-}

bbfdm/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# This deletes the userinterface json plugin if exists in case of upgrade
-if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
-	rm /etc/bbfdm/json/UserInterface.json
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-
-	# Apply the changes
-	uci commit network
-	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -1 +0,0 @@
-/etc/nginx/allow_host_*

bulkdata/Makefile

@@ -1,24 +1,25 @@
 #
-# Copyright (C) 2022 iopsys Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.2
+PKG_VERSION:=1.0.3
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_VERSION:=b35e7862bc17fc11dc1f757c7b93900995a28633
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=d83c42070e7f10178dc1c2d0ce078e3d6d42d889
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
@@ -28,24 +29,21 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	BBF BulkData Collection
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
+	-D_GNU_SOURCE
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/	
-	$(INSTALL_DIR) $(1)/etc/bulkdata
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bulkdata
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/bulkdata/input.json

@@ -1,15 +0,0 @@
-{
-	"daemon": {
-		"input": {
-			"type": "JSON",
-			"name": "/etc/bulkdata/bulkdata.json"
-		},
-		"output": {
-			"type": "UBUS",
-			"name": "bbfdm.bulkdata",
-			"parent_dm": "Device.",
-			"object": "BulkData",
-			"root_obj": "bbfdm"
-		}
-	}
-}

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,43 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
 	option log_level '3'
 
+config profile
+	option profile_id '1'
+	option enable '0'
+	option name ''
+	option nbre_of_retained_failed_reports '0'
+	option protocol 'http'
+	option encoding_type ''
+	option reporting_interval '86400'
+	option time_reference '0'
+	option csv_encoding_field_separator ','
+	option csv_encoding_row_separator '
'
+	option csv_encoding_escape_character '"'
+	option csv_encoding_report_format 'column'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_format 'objecthierarchy'
+	option json_encoding_report_time_stamp 'unix'
+	option http_url ''
+	option http_username ''
+	option http_password ''
+	option http_compression 'none'
+	option http_method 'post'
+	option http_use_date_header '1'
+	option http_retry_enable '0'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+	option http_persist_across_reboot '0'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+

bulkdata/files/etc/init.d/bulkdatad

@@ -1,28 +1,26 @@
 #!/bin/sh /etc/rc.common
+# Bulkdata Software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
-START=60
+START=99
 STOP=10
 
-. /etc/bbfdm/bbfdm_services.sh
-
 USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
-BULKDATA_JSON_INPUT="/etc/bulkdata/input.json"
 
 start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	[ "$enable" -eq "1" ] && {
-		procd_open_instance "bulkdata"
+	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
+	if [ "$bulkdata_enable" = "1" ]; then
+		procd_open_instance
 		procd_set_param command "$PROG"
-		procd_set_param respawn
-		procd_close_instance "bulkdata"
-	}
+		procd_set_param respawn "3" "7" "0"
+		procd_close_instance
+	fi
+}
 
-	bbfdm_add_service "bbfdm.bulkdata" "${BULKDATA_JSON_INPUT}"
+boot() {
+	start
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

crashlog/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

crun/Makefile

@@ -0,0 +1,81 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crun
+PKG_VERSION:=0.20
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/containers/crun.git
+PKG_SOURCE_DATE:=2021-06-07
+PKG_SOURCE_VERSION:=8d6a8b5ab80461cfed19f020a36584af13c32038
+PKG_MIRROR_HASH:=9ca1f0e530b33ce8820bd03329eb6731c5050d6e7f35bd2463d9a81cc00382e0
+
+PKG_BUILD_DEPENDS:=argp-standalone
+PKG_BUILD_PARALLEL:=1
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+PKG_MAINTAINER:=Oskari Rauta <oskari.rauta@gmail.com>
+PKG_LICENSE:=GPL-2.0-or-later
+PKG_LICENSE_FILES:=COPYING
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crun
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=crun
+  URL:=https://github.com/containers/crun
+  DEPENDS:=@!arc +libseccomp +libcap
+endef
+
+define Package/crun/description
+  A fast and low-memory footprint OCI Container Runtime fully written in C.
+endef
+
+CONFIGURE_ARGS+= \
+	--disable-systemd \
+	--enable-embedded-yajl \
+	--enable-caps \
+	--enable-dl \
+	--enable-seccomp \
+	--enable-bpf
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+	$(SED) '/#include <git-version.h>/d' $(PKG_BUILD_DIR)/src/crun.c
+endef
+
+define Build/Configure
+	$(call Build/Configure/Default)
+
+	$(SED) '/#define PACKAGE \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define GIT_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_BUGREPORT \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_NAME \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_STRING \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_TARNAME \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+
+	echo "#define PACKAGE \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_NAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_STRING \"$(PKG_NAME) $(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_TARNAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_BUGREPORT \"bugs@openwrt.org\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define GIT_VERSION \"$(PKG_SOURCE_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+endef
+
+define Package/crun/install
+	$(INSTALL_DIR) $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/crun $(1)/usr/bin/
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcrun.* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,crun))

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 4
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=4.1.0.4
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=566f0b7d148c0ece72f311c4f4b6b5f8e11d6f97
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

decollector/files/deagent.init

@@ -1,30 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/deagent
-
-service_running() {
-	ubus -t 2 wait_for wifi ieee1905 ieee1905.map
-}
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "$PROG" "-d" "-t 10"
-	#procd_set_param stdout 1
-	#procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger wireless
-}

decollector/files/decollector.init

@@ -1,43 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/decollector
-
-service_running() {
-	ubus -t 2 wait_for ieee1905 ieee1905.map topology
-}
-
-start_service() {
-	sleep 3
-	[ -e "/etc/config/mapcontroller" ] && {
-		local en
-
-		config_load mapcontroller
-		config_get en controller enabled "0"
-		config_get collect_int controller de_collect_interval
-
-		[ -n "$collect_int" -a $collect_int -lt 30 ] &&  collect_int=""
-
-		[ $en -gt 0 ] && {
-			procd_open_instance
-			procd_set_param command "$PROG" "-d" "${collect_int:+-t $collect_int}"
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_set_param respawn
-			procd_close_instance
-		}
-	}
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger mapcontroller
-}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,14 +1,20 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.14
+PKG_VERSION:=3.1.18
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=4f16755f8ac09d373234565f050832c049bdf543
+PKG_SOURCE_VERSION:=0e937cfb839f845cf28922c4dde0572ec2842f85
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -28,41 +34,29 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
+	DEPENDS:= +libubox +ubus +uci
 endef
 
 define Package/$(PKG_NAME)/description
 	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
 endef
 
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
 	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
 	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +1,2 @@
 config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'
+	option log_dect_cmbs '0'

dectmngr/files/etc/init.d/dectmngr

@@ -6,103 +6,52 @@ START=70
 STOP=12
 
 USE_PROCD=1
+NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
-
-DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
+	pidof $NAME && killall -q $NAME
 
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
 		sleep 1
 	done
 }
 
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
-	local rxtun=
 
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
+	test $(db get hw.board.hasDect) = "0" && return
 
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
 
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+	# model_id=$(db -q get hw.board.dect_model_id)
+	# Setting model_id to 0x010203 is a workaround to reduce synchronisation time of some handset
+	# TODO: remove below line and uncomment the line above to get value from db when the problem is solved
+	model_id="01.02.03"
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] && opt_ext="$opt_ext -model $model_id"
 
 	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
+	config_get_bool log_dect_cmbs global log_dect_cmbs 0
 
 	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
+	if [ $log_dect_cmbs -eq 0 ]; then
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	file)
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	esac
-
+	else
+		echo "Starting dectmngr with cmbs logging enabled"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	fi
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
 	procd_set_param triggers asterisk
@@ -110,28 +59,28 @@ start_service() {
 }
 
 stop_service() {
-	has_dect || return 0
+	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
 reload_service() {
-	ubus call dect reload
+	stop_and_wait_dectmngr
+	start
 }
 
-service_triggers() {
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+service_triggers()
+{
+	procd_add_reload_trigger asterisk dect
 }
 
 boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
+

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dslmngr/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=43dec92b1c86be7859521da337e7bd1168848b26
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -26,8 +26,14 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -68,10 +74,6 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
 endef
 
 define Package/easy-qos/description
@@ -39,7 +39,11 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,130 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=6.4.5
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=23028753fdfc5f4a0e8da33fb6b813e21c5d6c23
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,65 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=6d7b2e9c90234767cb56a1e7885f42825bd6287a
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=MIT
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom Voice Endpoint Manager
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,25 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.0.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,17 +37,10 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/etc/init.d/ethmngr

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger network
-}

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=ef46eb3be68ae1216d8699234f237fb2243289f1
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
@@ -38,6 +38,9 @@ define Package/$(PKG_NAME)/description
 	Command to extract sub images from FIT images.
 endef
 
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
+
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 

fscryptctl/Makefile

@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fscryptctl
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/google/fscryptctl.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Encryption
-  TITLE:=Fscryptctl
-endef
-
-define Package/$(PKG_NAME)/description
-	fscryptctl is a low-level tool written in C that handles raw keys and manages policies for Linux filesystem encryption,
-	specifically the "fscrypt" kernel interface which is supported by the ext4, f2fs, and UBIFS filesystems
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		fscryptctl
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fscryptctl $(1)/usr/bin/fscryptctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gryphon-led-module/Makefile

@@ -28,7 +28,6 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,9 +40,6 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -220,6 +220,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	}
 
@@ -227,6 +228,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
@@ -244,6 +246,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	}
 
@@ -251,6 +254,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

hostmngr/Config.in

@@ -1,15 +0,0 @@
-if (PACKAGE_hostmngr)
-
-menu "Configuration"
-
-config HOSTMNGR_HOSTS_HISTORY
-	bool "Keep history of hosts"
-	default y
-
-config HOSTMNGR_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
-
-endmenu
-
-endif

hostmngr/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostmngr
-PKG_VERSION:=1.0.3
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bfb9098121d665a324c86a2a9ee0971871d6c22e
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/hostmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Show and manage hosts in the network
-  DEPENDS= +libubox +libuci +libubus +ubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +libnfnetlink +libmnl \
-	   +libnetfilter-conntrack \
-	   +HOSTMNGR_PLATFORM_HAS_WIFI:libwifi +libbbfdm-api
-
-endef
-
-define Package/hostmngr/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/hostmngr/description
- This package provides hostmngr that can detect and show host devices
- present in the network.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
-	-D_GNU_SOURCE
-
-ifeq ($(CONFIG_HOSTMNGR_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
-endif
-
-MAKE_PATH:=src
-
-define Package/hostmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/hostmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/hostmngr $(1)/usr/sbin/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/bbf_plugin/libhostmngr.so $(1)/etc/hostmngr/
-	$(INSTALL_DATA) ./files/etc/hostmngr/input.json $(1)/etc/hostmngr/	
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -r --exclude=.* ~/git/hostmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,hostmngr))

hostmngr/files/etc/config/hosts

@@ -1,9 +0,0 @@
-
-config global 'global'
-	option enabled '1'
-	option history '1'
-	option history_file '/etc/hosts_history.json'
-	option history_timeout '86400'
-
-config interface
-	list ifname 'br-lan'

hostmngr/files/etc/firewall.hosts

@@ -1,126 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-day=""
-IP_RULE=""
-
-process_ac_schedule() {
-	local acs_id="$1"
-	local is_enabled
-	local access_control
-	local start_time=""
-	local stop_time=""
-	local mac=""
-
-	handle_day_list() {
-		local value=$1
-
-		val=$(echo $value | cut -c 1-3)
-		if [ -z $day ]; then
-			day="$val"
-		else
-			day="$day,$val"
-		fi
-	}
-
-	config_list_foreach "$acs_id" "day" handle_day_list
-	config_get is_enabled "$acs_id" "enable" 1
-	config_get access_control "$acs_id" "dm_parent"
-
-	if [ "$is_enabled" == "0" ] || [ -z "$access_control" ]; then
-		return
-	fi
-
-	IP_RULE=""
-
-	mac=$(uci -q get hosts.$access_control.macaddr)
-	access_policy=$(uci -q get hosts.$access_control.access_policy)
-
-	config_get start_time "$acs_id" "start_time"
-	config_get duration "$acs_id" "duration"
-
-	if [ -z "$mac" ] && [ -z "$start_time" ] && [ -z "$duration" ] && [ -z "$day" ] && [ -z "$access_policy" ]; then
-		return
-	fi
-	if [ -n "$mac" ]; then
-		IP_RULE="$IP_RULE -m mac --mac-source $mac"
-	fi
-
-	# as per iptables manual default starttime is 00:00
-	# default stoptime is 23:59
-	if [ -z "$start_time" ]; then
-		start_time="0:0"
-	fi
-
-        if [ -n "$duration" ]; then
-		hh=$(echo $start_time | awk -F: '{ print $1 }')
-                mm=$(echo $start_time | awk -F: '{ print $2 }')
-                hh_s=`expr $hh \* 3600`
-                mm_s=`expr $mm \* 60`
-                ss=$(( hh_s + mm_s ))
-
-                stop_ss=$(( ss + duration ))
-                hh=$(( stop_ss / 3600 ))
-                if [ $hh -lt 24 ]; then
-                	rem_ss=$(( stop_ss % 3600 ))
-                	mm=$(( rem_ss / 60 ))
-                	ss=$(( rem_ss % 60 ))
-                	stop_time="$hh:$mm:$ss"
-                else
-                	stop_time="23:59"
-                fi
-        else
-        	stop_time="23:59"
-        fi
-
-	# conversion to utc
-	zone=$(date +%z | cut -c 1)
-	utc_h=$(date -u -d @$(date "+%s" -d "$start_time") +%H)
-	local_h=$(echo $start_time | awk -F: '{ print $1 }')
-	if [ "$zone" == "+" ] && [ $utc_h -gt $local_h ]; then
-		start_utc="0:0"
-	else
-		start_utc=$(date -u -d @$(date "+%s" -d "$start_time") +%H:%M)
-	fi
-
-	utc_h=$(date -u -d @$(date "+%s" -d "$stop_time") +%H)
-	local_h=$(echo $stop_time | awk -F: '{ print $1 }')
-	if [ "$zone" == "-" ] && [ $utc_h -lt $local_h ]; then
-		stop_utc="23:59"
-	else
-		stop_utc=$(date -u -d @$(date "+%s" -d "$stop_time") +%H:%M)
-	fi
-
-
-	IP_RULE="$IP_RULE -m time --timestart $start_utc --timestop $stop_utc"
-	if [ -n "$day" ]; then
-		IP_RULE="$IP_RULE --weekdays $day"
-	fi
-
-	if [ "$access_policy" == "Deny" ]; then
-		IP_RULE="$IP_RULE -j DROP"
-	else
-		IP_RULE="$IP_RULE -j ACCEPT"
-	fi
-
-	iptables -w -A hosts_forward ${IP_RULE}
-	ip6tables -w -A hosts_forward ${IP_RULE}
-
-	day=""
-}
-
-iptables -w -F hosts_forward
-ip6tables -w -F hosts_forward
-
-iptables -w -t filter -N hosts_forward
-ret=$?                        
-[ $ret -eq 0 ] && iptables -w -t filter -I FORWARD -j hosts_forward
-ip6tables -w -t filter -N hosts_forward
-ret=$?                        
-[ $ret -eq 0 ] && ip6tables -w -t filter -I FORWARD -j hosts_forward
-
-# Load /etc/config/hosts UCI file
-config_load hosts
-config_foreach process_ac_schedule ac_schedule
-

hostmngr/files/etc/hostmngr/input.json

@@ -1,16 +0,0 @@
-{
-	"daemon": {
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/hostmngr/libhostmngr.so"
-		},
-		"output": {
-			"type": "UBUS",
-			"name": "bbfdm.hosts",
-			"parent_dm": "Device.",
-			"object": "Hosts",
-			"root_obj": "bbfdm"
-		}
-	}
-}
-

hostmngr/files/etc/uci-defaults/992-firewall_host.ucidefaults

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-if [ -f /etc/firewall.hosts ]; then
-	uci -q get firewall.hosts || {
-		uci -q set firewall.hosts=include
-		uci -q set firewall.hosts.path="/etc/firewall.hosts"
-		uci -q set firewall.hosts.reload=1
-	}
-fi
-
-
-exit 0

hostmngr/files/etc/uci-defaults/993-topology-hosts-to-hostmngr-hosts-config

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-uci -q get hosts.global.ageing_timer || exit 0
-
-
-# Old hosts UCI config is detected; Convert to new format
-
-ageing_timer="$(uci -q get hosts.global.ageing_timer)"
-history_timeout=$((ageing_timer*60))
-
-uci -q set hosts.global.enabled=1
-uci -q delete hosts.global.ageing_timer
-uci -q set hosts.global.history_timeout="$history_timeout"
-uci -q rename hosts.global.reboot_persistent=history
-uci -q set hosts.global.history_file="/etc/hosts_history.json"
-
-uci -q add hosts interface
-for ifname in $(uci -q get hosts.global.ifname); do
-	uci -q add_list hosts.@interface[-1].ifname="$ifname"
-done
-
-uci -q delete hosts.global.ifname
-exit 0

icwmp/Config_cwmp.in

@@ -0,0 +1,24 @@
+if PACKAGE_icwmp
+
+menu "Configuration"
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+endmenu
+endif
+

icwmp/Makefile

@@ -1,84 +1,52 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.5.8
-
+PKG_VERSION:=8.2.5-2021-10-26
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=79871c5365cf89ce718b922b0863c8a68c09a771
+PKG_SOURCE_VERSION:=bf33885bf7a4c61fa32d19a96d48acf0abf92d25
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbfdm-api
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
 endef
 
-define Package/icwmp
-  $(Package/icwmp/default)
-  VARIANT:=default
-  DEFAULT_VARIANT:=1
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+define Package/$(PKG_NAME)/description
+ A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  VARIANT:=openssl
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-wolfssl
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  VARIANT:=wolfssl
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-openssl
-endef
-
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := icwmp icwmp-wolfssl icwmp-openssl
-endef
-
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -86,36 +54,47 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libcwmpdm.so $(1)/usr/lib/bbfdm/libcwmpdm.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/90-icwmp $(1)/etc/hotplug.d/iface/90-icwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
-Package/icwmp/install = $(Package/icwmp/default/install)
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
-
-$(eval $(call BuildPackage,icwmp))
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+$(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -1,9 +1,11 @@
 config acs 'acs'
+	option url ''
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option periodic_inform_enable 'true'
 	option periodic_inform_interval '1800'
 	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option ParameterKey ''
 	option dhcp_discovery 'enable'
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
@@ -11,13 +13,15 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
+	option https_ssl_capath ''
+	option ipv6_enable '0'
+	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
+	option interface 'eth0.1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
-	option log_to_file 'disable'
+	option log_to_file 'enable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'
@@ -30,15 +34,14 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
 	
 config lwn 'lwn'
-	option enable '0'
+	option enable '1'
 	option hostname ''
 	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -1,62 +1,44 @@
-#!/bin/sh
-
 #created by the icwmp package
-log() {
-	echo "${@}"|logger -t firewall.cwmp -p info
-}
 
-get_firewall_zone() {
-	zone="$(uci show firewall|grep network|grep ${1}|cut -d. -f 2)"
-	zone="${zone:-wan}" # defaults to wan zone
-	echo "$zone"
-}
-
-cleanup_exiting_rules() {
-        while iptables -w 1 -nL zone_"${1}"_input --line-numbers 2>/dev/null | grep "Open_ACS_port"; do
-		rule_num="$(iptables -w 1 -nL zone_"${1}"_input --line-numbers | grep "Open_ACS_port" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			iptables -w 1 -D zone_"${1}"_input "${rule_num}";
-		fi
-	done
-        while ip6tables -w 1 -nL zone_"${1}"_input --line-numbers 2>/dev/null | grep "Open_ACS_port"; do
-		rule_num="$(ip6tables -w 1 -nL zone_"${1}"_input --line-numbers | grep "Open_ACS_port" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			ip6tables -w 1 -D zone_"${1}"_input "${rule_num}";
-		fi
-	done
-}
-
-enable="$(uci -q get cwmp.cpe.enable)"
-enable="${enable:-1}"
-
-if [ "$enable" -eq 0 ]; then
-	log "CWMP not enabled"
+if [ ! -f "/var/state/cwmp" ]; then
 	exit 0;
 fi
 
-wan="$(uci -q get cwmp.cpe.default_wan_interface)"
-wan="${wan:-wan}"
-
-zone_name="$(get_firewall_zone $wan)"
-
+zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
 port=$(uci -q get cwmp.cpe.port)
-port="${port:-7547}"
+ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr [A-Z] [a-z])
 
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|awk '{print tolower($0)}')
-incoming_rule="${incoming_rule:-port_only}"
-
-ipaddr=$(uci -c /var/state -q get icwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get icwmp.acs.ip6)
+if [ "$zone_name" = "" ]; then
+	exit 0
+elif [ "$zone_name" = "icwmp" ]; then
+	iptables -nL zone_icwmp_input 2> /dev/null
+	if [ $? != 0 ]; then
+		iptables -N zone_icwmp_input
+		iptables -t filter -A INPUT -j zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	else			
+		iptables -F zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	fi			
+else
+	iptables -F zone_icwmp_input 2> /dev/null
+	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -X zone_icwmp_input 2> /dev/null
+fi
 
 cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
 cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
 
 # default incoming rule is Port only
+if [ -z "${incoming_rule}" ]; then
+	incoming_rule="port_only"
+fi
+
 if [ "${incoming_rule}" = "ip_only" ]; then
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-	fi
-	if [ -n "${ip6addr}" ]; then
 		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 elif [ "${incoming_rule}" = "port_only" ]; then
@@ -67,9 +49,6 @@ elif [ "${incoming_rule}" = "port_only" ]; then
 else
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-	fi
-
-	if [ -n "${ip6addr}" ]; then
 		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 
@@ -79,23 +58,14 @@ else
 	fi
 fi
 
-cleanup_exiting_rules "${zone_name}"
-
-echo "${cmd}"|grep -q "\-\-dport \|\-s "
+echo ${cmd}|grep -q "\-\-dport \|\-s "
 if [ "$?" -eq 0 ]; then
 	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
 	${cmd}
-	log "Applied [${cmd}]"
 fi
 
-echo "${cmd6}"|grep -q "\-\-dport \|\-s "
+echo ${cmd6}|grep -q "\-\-dport \|\-s "
 if [ "$?" -eq 0 ]; then
 	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
 	${cmd6}
-	log "Applied [${cmd6}]"
-fi
-
-if [ -f "/var/state/icwmp" ]; then
-	uci -c /var/state -q set icwmp.cpe.firewall_restart="init"
-	uci -c /var/state -q commit icwmp
 fi

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -0,0 +1,119 @@
+#!/bin/sh
+
+. /lib/functions/network.sh
+
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+[ -f /etc/config/cwmp ] || exit 0
+
+handle_icwmp_restart() {
+	[ -f /tmp/switching_mode ] && exit 0
+	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
+
+	[ "$INTERFACE" == "loopback" ] && exit 0
+
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0
+
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0
+
+	local ifname="$(uci -q get network.$INTERFACE.ifname)"
+	[ "${ifname:0:1}" == "@" ] && exit 0
+	
+	mkdir -p /tmp/ipv4
+
+	network_flush_cache
+
+	local previpaddr=""
+	local curipaddr=""
+	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+	previpaddr=$(cat $ipaddrfile 2>/dev/null)
+	network_get_ipaddr curipaddr $INTERFACE
+	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+	local prevgateway=""
+	local curgateway=""
+	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+	prevgateway=$(cat $gatewayfile 2>/dev/null)
+	network_get_gateway curgateway $INTERFACE
+	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+	local prevsubnets=""
+	local cursubnets=""
+	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+	prevsubnets=$(cat $subnetsfile 2>/dev/null)
+	network_get_subnets cursubnets $INTERFACE
+	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+	local prevdnsservers=""
+	local curdnsservers=""
+	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
+	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
+	network_get_dnsserver curdnsservers $INTERFACE
+	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
+
+	local prevdev=""
+	local curdev=""
+	local devfile=/tmp/ipv4/$INTERFACE-dev
+	prevdev=$(cat $devfile 2>/dev/null)
+	network_get_device curdev $INTERFACE
+	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
+
+	local vendorspecinf=`ubus call network.interface.${defwan} status | jsonfilter -e "@.data.vendorspecinf"`
+	[ -n "$vendorspecinf" ] && {
+		local url=""
+		case $vendorspecinf in
+			http://*|https://*)
+					url="$vendorspecinf"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo $optval | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+		if [ ! -f /var/state/cwmp ]; then
+			touch /var/state/cwmp
+		fi
+		uci -q -c /var/state/ get cwmp.acs
+		if [ "$?" -ne 0 ]; then
+			unnamed=`uci -q -c /var/state/ add cwmp acs`
+			uci -c /var/state/ -q rename cwmp.$unnamed='acs'
+		fi
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.dhcp_url="$url"
+		uci -c /var/state commit cwmp
+	}
+                
+	local prevopt43url=""
+	local curopt43url=""
+	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
+	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
+	curopt43url="$(uci -c /var/state -q get cwmp.acs.dhcp_url)"
+	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
+
+	[ \
+		"$prevdev" == "$curdev" -a \
+		"$previpaddr" = "$curipaddr" -a \
+		"$prevgateway" = "$curgateway" -a \
+		"$prevsubnets" = "$cursubnets" -a \
+		"$prevdnsservers" = "$curdnsservers" \
+	] && {
+		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
+		[ -z "$prevopt43url" ] && exit 0
+	}
+
+	echo "Restarting icwmp"|logger -t cwmp.hotplug -p info
+
+	/etc/init.d/icwmpd reload &
+}
+
+handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-log() {
-	echo "$@" |logger -t cwmp.update -p info
-}
-
-handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
-
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
-
-	# wait for some time to avoid interface fluctuation
-	sleep 10
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
-
-	if [ "$ret" != "true" ]; then
-		log "Restarting icwmp tr069 object"
-		/etc/init.d/icwmpd restart
-	fi
-}
-
-handle_icwmp_update "$@"

icwmp/files/etc/init.d/icwmpd

@@ -1,359 +1,129 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
+. /lib/functions.sh
+include /lib/network
+. /usr/share/libubox/jshn.sh
+
 START=99
-STOP=00
+STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-include /lib/network
+EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
 
 log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
+validate_url() {
+	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
+	# Example: SCHEMA_LIST="http https"
+	SCHEMA_LIST="http"
 
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
+	for schema in $SCHEMA_LIST;	do
+		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
+		if [ "_$dest" != "_" ]; then
+			return 0
+		fi
+	done
+	return 1
+}
 
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls "${cert_dir}"/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+get_acs_url() {
+	local default_acs="http://10.10.1.6:8000/openacs/acs"
+	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
+	local url="$(uci -q get cwmp.acs.url)"
+	local dhcp_url="$(uci -c /var/state -q get cwmp.acs.dhcp_url)"
+
+	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
+		url="$dhcp_url"
+		log "ACS URL from DHCP server: $url"
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
+	elif [ -n "$url" ];then
+		url="$(uci -q get cwmp.acs.url)"
+		log "ACS URL from configuration: $url"
+	else
+		url="$default_acs"
+		log "Using default ACS URL: $url"
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.url="$url"
 	fi
 
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls "${cert_dir}"/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+	validate_url "$url"
+	if [ "$?" != "0" ];then
+		echo "Invalid ACS URL: $url"
+		exit 1
 	fi
 }
 
 enable_dhcp_option43() {
-	local wan="${1}"
+	local wan=$1
+	local discovery=0
+	case $2 in
+		enable|1) discovery=1 ;;
+	esac
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
+	local enabled
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
 	for ropt in $reqopts; do
 		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
 		esac
 	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ $proto == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
+	########################################################
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
+wait_for_option43() {
+	local time=$1
+	local default_wan_interface dhcp_discovery url
 
-	echo "${val}"
-}
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get url acs url
 
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
+	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
 
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		if [ -z "${sendopt}" ]; then
-			local opt125="125,00:00:0D:E9"
-		else
-			local opt125=":00:00:0D:E9"
-		fi
-	fi
+	local tm=0
 
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ "${oui_len}" -eq 0 ] || [ "${serial_len}" -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ "${class_len}" -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ "${class_len}" -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network."${intf}".sendopts="$new_send_opt"
-	else
-		new_send_opt="$sendopt$opt125"
-		uci -q add_list dhcp."${intf}".dhcp_option="$new_send_opt"
-	fi
-}
-
-check_for_suboptions() {
-	# Check if option 4 and 5 present inside enterprise id 3561
-	data=$(echo "${1}" | sed 's/://g')
-	len=$(printf "${data}"|wc -c)
-
-	rem_len="${len}"
-	while [ $rem_len -gt 8 ]; do
-		subopt_present=0
-
-		ent_id="${data:0:8}"
-		ent_id=$(printf "%d\n" "0x$ent_id")
-		if [ $ent_id -ne 3561 ]; then
-			len_val=${data:8:2}
-			data_len=$(printf "%d\n" "0x$len_val")
-			# add 4 byte for ent_id and 1 byte for len
-			data_len=$(( data_len * 2 + 10 ))
-			# move ahead data to next enterprise id
-			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - data_len ))
-			continue
-		fi
-
-		# read the length of enterprise data
-		len_val=${data:8:2}
-		data_len=$(printf "%d\n" "0x$len_val")
-		# add 4 byte for ent_id and 1 byte for len
-		data_len=$(( data_len * 2 + 10 ))
-
-		len_val=${data:8:2}
-		opt_len=$(printf "%d\n" "0x$len_val")
-		if [ $opt_len -eq 0 ]; then
-			echo ${subopt_present}
-			return 0
-		fi
-
-		# populate the option data of enterprise id
-		sub_data_len=$(( opt_len * 2))
-		# starting 10 means ahead of length field
-		sub_data=${data:10:"${sub_data_len}"}
-
-		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${sub_data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-			case "${sub_opt_id}" in
-			"4") subopt_present=1
-			;;
-			"5") subopt_present=1
-			;;
-			esac
-
-			if [ ${subopt_present} -eq 1 ]; then
-				break;
-			fi
-
-			# get the length of suboption
-			sub_opt_len=${sub_data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# update the remaining sub option hex string length
-			sub_data_len=$((sub_data_len - sub_opt_end))
-
-			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
-		done
-
-		if [ ${subopt_present} -eq 1 ]; then
-			break;
-		else
-			# move ahead data to next enterprise id
-			rem_len=$(( rem_len - $data_len ))
-			data=${data:"${data_len}":"${rem_len}"}
-		fi
-	done
-
-	echo ${subopt_present}
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp."${lan}".dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp."${lan}".dhcp_option)"
-		base_opt=""
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=$(check_for_suboptions "${sopt:4}")
-				base_opt="${sopt}"
+	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
+	then
+		log "Waiting for discovery of ACS URL from dhcp server ..."
+		while [ $tm -le $time ]
+		do
+			acs_url=`uci -c /var/state -q get cwmp.acs.dhcp_url`
+			if [ "$acs_url" != "" ]
+			then
 				break
+			else
+				sleep 1
 			fi
+			tm=$((tm+1))
 		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			uci -q del_list dhcp."${lan}".dhcp_option="${base_opt}"
-			configure_send_op125 "${base_opt}" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		fi
-	fi
-}
-
-enable_dhcp_option125() {
-	local wan="${1}"
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local sendopts="$(uci -q get network."${wan}".sendopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" = "dhcp" ]; then
-		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
-			uci -q set network."${wan}".reqopts="$newreqopts"
-			network_uci_update=1
-		fi
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "${sendopts}" "${wan}" "network"
-			network_uci_update=1
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
 	fi
 }
 
@@ -364,224 +134,70 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f "$resolvfile" ]; do
+	while [ ! -f $resolvfile ]; do
 		sleep 1
-		[ "$tm" -ge "$time" ] && break
+		[ $tm -ge $time ] && break
 		tm=$((tm+1))
 	done
 }
 
-copy_cwmp_etc_files_to_varstate() {
-	mkdir -p /var/run/icwmpd
+set_wan_interface() {
+	local l3_device=""
+	local default_wan_interface=""
 
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	json_load "$(ifstatus $default_wan_interface)"
+	json_get_var l3_device l3_device
+	if [ "$l3_device" != "" ];then
+		uci -q set cwmp.cpe.interface="$l3_device"
+		uci -q commit cwmp
 	fi
 }
 
-copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
-	fi
-
-	# move the successful custom notify import marker to persistent storage
-	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
-		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string' \
-		'dhcp_discovery:string' \
-		'dhcp_url:string' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'ssl_capath:string'
-
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'enable:bool' \
-		'periodic_notify_interval:uinteger'
-}
-
-validate_defaults() {
-	local ssl_capath
-	config_load cwmp
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-
-	ssl_capath="${ssl_capath%/}"
-	# Put the cert pem file in keep list
-	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
-			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
-		fi
-	fi
-
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-
-	return 0;
-}
-
-boot() {
-	local enable_cwmp="0"
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-	local wan_interface=""
-	
-	config_get wan_interface cpe default_wan_interface "wan"
-	
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
-	fi
-
-	config_get dhcp_discovery acs dhcp_discovery "0"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-		# Set dhcp option 60
-		set_vendor_id "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_dhcp_option125 "${wan_interface}"
-		enable_dnsmasq_option125 "${lan_interface}"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	# Copy backup data so that if it restart latter on, it gets the info
-	copy_cwmp_etc_files_to_varstate
-	mkdir -p /var/run/icwmpd/
-	touch /var/run/icwmpd/cwmp
-
-	start
+service_running() {
+	ubus wait_for usp.raw
 }
 
 start_service() {
-	local enable_cwmp
+	if [ ! -f /tmp/.icwmpd_boot ]; then
+		touch /etc/icwmpd/.icwmpd_boot
+		touch /tmp/.icwmpd_boot
+	else
+		[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+		[ -f /etc/config/wireless ] && log "Waiting for WiFi to be started ..." && ubus -t 5 wait_for network.wireless
+		[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+		[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+		[ -f /usr/sbin/asterisk ] && log "Waiting for Voice to be started ..." && ubus -t 5 wait_for asterisk
 
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
+		log "Waiting for usp.raw to be started"
+		ubus wait_for usp.raw
 
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
+		config_load cwmp
+		set_wan_interface
+		wait_for_option43 20
+		get_acs_url
+
+		procd_open_instance icwmp
+		procd_set_param command "$PROG"
+		if [ "$1" = "GetRPCMethods" ];then
+			procd_append_param command -g
+		elif [ -f /etc/icwmpd/.icwmpd_boot ]; then
+			procd_append_param command -b
+		fi
+		procd_set_param respawn \
+			${respawn_threshold:-5} \
+			${respawn_timeout:-10} ${respawn_retry:-3}
+
+		procd_close_instance
 	fi
-
-	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-
-	validate_defaults || {
-		log "Validation of defaults failed"
-		return 1;
-	}
-
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	procd_append_param command -b
-	procd_set_param respawn \
-		"${respawn_threshold:-5}" \
-		"${respawn_timeout:-10}" "${respawn_retry:-3}"
-
-	procd_set_param watch network.interface
-	procd_close_instance
-}
-
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so returning
-		return 0
-	fi
-
-	status="$(echo "${tr069_status}" | jsonfilter -qe '@.cwmp.status')"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-	fi
-}
-
-add_interface_trigger() {
-        procd_add_interface_trigger "interface.update" "$1" /etc/icwmpd/update.sh
+	stop
+	start
 }
 
 service_triggers() {
-       local wan_interface
-
-       config_load cwmp
-       config_get wan_interface cpe default_wan_interface "wan"
-
-       procd_add_reload_trigger "cwmp"
-       add_interface_trigger ${wan_interface}
+	procd_add_config_trigger "config.change" "cwmp"  /etc/init.d/icwmpd reload
 }
 

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,41 +1,32 @@
-#!/bin/sh
-
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
-# Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
-if [ -z "${oui}" ]; then
-	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-fi
 
-oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+# Get factory base MAC.
+baseMac=$(db -q get hw.board.basemac)
+
+# Erase colon and space characters.
+baseMac=${baseMac//:/}
+baseMac=${baseMac// /}
+
+# Caseing and fixed length string.
+mac=$(printf "%12.12X" $((0x$baseMac)))
 
 # Get system serial number.
-config_get serial cpe serial_number ""
-if [ -z "${serial}" ]; then
-	serial=$(db -q get device.deviceinfo.SerialNumber)
-fi
+serial=$(db -q get hw.board.serial_number)
 
 # Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
 
 # Only set if they are empty
-if [ -z "${acs_userid}" ]; then
-    uci -q set cwmp.acs.userid="${oui}-${serial}"
+if [ -z "$acs_userid" ]
+then
+    uci -q set cwmp.acs.userid="${mac:0:6}-${serial}"
 fi
 
-if [ -z "${cpe_userid}" ]; then
-    uci -q set cwmp.cpe.userid="${oui}-${serial}"
-fi
-
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
+if [ -z "$cpe_userid" ]
+then
+    uci -q set cwmp.cpe.userid="${mac:0:6}-${serial}"
 fi
 
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -0,0 +1,54 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+set_cwmp_reqopts() {
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
+	local discovery=0
+	case $dhcp_discovery in
+		enable|1) discovery=1 ;;
+	esac
+
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
+	for ropt in $reqopts; do
+		case $ropt in
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
+		esac
+	done
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ "$proto" == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+	fi
+}
+
+regenerate_ssl_link(){
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+set_cwmp_reqopts
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
-/var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp
+/etc/icwmpd/.icwmpd_backup_session.xml

ieee1905/Config.in

@@ -1,27 +1,10 @@
 if (PACKAGE_ieee1905)
 
-menu "Configuration"
+menu "Configurations"
 
 config IEEE1905_EXTENSION_ALLOWED
 	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
 	default y
 
-config IEEE1905_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
-
-config IEEE1905_CMDU_SA_IS_ALMAC
-	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
-	default n
-
-config IEEE1905_WIFI_EASYMESH
-	bool "Include WiFi-Alliance's Easymesh updates"
-	default y
-
-config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
-	default y
-
 endmenu
-
 endif

ieee1905/Makefile

@@ -1,17 +1,17 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2021 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.2.19
+PKG_VERSION:=4.0.4
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3d175485a7461ce567e3bee47e1c760e15434367
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
+PKG_SOURCE_VERSION:=e99c9ad752ee165c37d40a3ac139e0906bf03e3c
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -35,21 +35,27 @@ define Package/ieee1905/config
 endef
 
 define Package/libieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=libieee1905.so (library for CMDU and TLV handling)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= (library for CMDU and TLV handling)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
 	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ubus +libpthread \
-	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
+	   +libjson-c +libblobmsg-json +libwifi +ubus +libpthread \
+	   +libnl-genl +libieee1905
 endef
 
-include $(wildcard plugins/*.mk)
+
+define Package/map-plugin
+$(call Package/ieee1905/Default,$(1))
+  TITLE:=Multi-AP (Easymesh) plugin
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
 
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
@@ -59,45 +65,11 @@ define Package/libieee1905/description
  This package provides library functions for IEEE Std 1905.1 stack.
 endef
 
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugin),map) \
-	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
-	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
-
-
-ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
-
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
-TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
-endif
-
-ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
-TARGET_CFLAGS += -DWIFI_EASYMESH
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
-TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-endif
-
-ifeq ($(CONFIG_IEEE1905_EXTENSION_ALLOWED),y)
-TARGET_CFLAGS += -DEXTENSION_ALLOWED
-endif
-
-TARGET_CFLAGS += -DHAS_UBUS
-
-MAKE_FLAGS += \
-	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
-
 MAKE_PATH:=src
 
 
@@ -115,32 +87,43 @@ define Package/libieee1905/install
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 endef
 
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+
 define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef
 
 define Build/InstallDev
 	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
+	$(call Build/InstallDev/map-plugin,$(1),$(2))
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
-endef
-endif
 
 $(eval $(call BuildPackage,ieee1905))
 $(eval $(call BuildPackage,libieee1905))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))
+$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -2,34 +2,21 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	list extmodule 'topology'
-	option registrar '2 5 6'
-#	option macaddress '0a:1b:2c:3d:4e:50'
+	option registrar '2 5'
 
-config al-iface
-	option enabled '1'
-	list ifname 'br-lan'
-	list ifname '/eth.*'
-	list ifname '/wl.*'
-	list ifname '/wds.*'
-
-# ap sections are auto-generated/overwritten during onboarding
-#
 config ap
 	option band '2'
-	option ssid 'IOWRT-2.4GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.2'
+	option encryption 'psk2'
+	option key '5555500000'
 
 config ap
 	option band '5'
-	option ssid 'IOWRT-5GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.5'
+	option encryption 'psk2'
+	option key '2222200000'
 
+config al-iface
+	option enabled 1
+	option ifname 'br-lan'
+	option type 'bridge'

ieee1905/files/etc/init.d/ieee1905

@@ -5,88 +5,10 @@ STOP=21
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
-validate_ieee1905_section() {
-	uci_validate_section ieee1905 ieee1905 "ieee1905" \
-			'enabled:bool:true' \
-			'macaddress:or("auto",macaddr)' \
-			'registrar:string' \
-			'extension:bool:false' \
-			'extmodule:list(string)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ali_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'ifname:string' \
-			'type:or("bridge",string)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
-			'ssid:string' \
-			'encryption:or("psk2", "sae-mixed", "sae",
-				"psk", "psk-mixed", "none", string)' \
-			'key:string' \
-			'uuid:string' \
-			'manufacturer:string' \
-			'model_name:string' \
-			'device_name:string' \
-			'model_number:string' \
-			'serial_number:string' \
-			'device_type:string' \
-			'os_version:uinteger'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ap section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ieee1905_config() {
-	IS_CFG_VALID=1
-
-	validate_ieee1905_section &&
-		config_foreach validate_ali_section "al-iface" &&
-		config_foreach validate_ap_section ap
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
-	config_load "ieee1905"
-	validate_ieee1905_config || return 1;
-
 	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
+        procd_set_param command "/usr/sbin/ieee1905d"
 	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param env IEEE1905_LOG_CMDU=1
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1
 	procd_close_instance

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

ieee1905/files/etc/uci-defaults/31-ifname-option-to-list

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-config_load ieee1905
-
-ifname_to_list() {
-	local section=$1
-
-	config_get ifname $section ifname	# get list or option as space separated values
-	ifname=${ifname//,/\ }			# convert csv with space separation
-	uci del ieee1905.${section}.ifname	# delete entry
-	for i in ${ifname}; do
-		uci add_list ieee1905.${section}.ifname="$i"	# writeback entry as list
-	done
-}
-
-config_foreach ifname_to_list al-iface

ieee1905/plugins/map.mk

@@ -1,51 +0,0 @@
-define Package/map-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/map-plugin/config
-	if (PACKAGE_map-plugin)
-
-		menu "Configuration"
-
-		config MULTIAP_EASYMESH_VERSION
-		int "Easymesh version"
-		default 4
-
-		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-		bool "Sync configuration between dynamic controllers in the network"
-		default y
-
-		config MULTIAP_FUZZ_1905_CMDUS
-		bool "Include support to fuzz 1905 CMDUs for testing purpose"
-		default n
-
-		endmenu
-	endif
-endef
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
-
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef

ieee1905/plugins/snoop.mk

@@ -1,12 +0,0 @@
-define Package/snoop-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Show all received 1905 CMDUs over UBUS
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/snoop-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
-endef

ieee1905/plugins/topology.mk

@@ -1,12 +0,0 @@
-define Package/topology-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Build full network topology of the 1905 nodes only
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/topology-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
-endef

imonitor/files/etc/init.d/imonitor

@@ -18,7 +18,12 @@ start_service() {
 	procd_close_instance
 }
 
+stop() {
+	service_stop imonitor
+}
+
 reload_service() {
 	stop
 	start
 }
+