inteno-netmode: update repo hash

/sbin/fatrace -c -t -f W |  grep "/etc/"

produced no output until internal printf buffer full and that is not so
useful.

4g-support/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	interface=$(cat $usb_dir/interface)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+#devno=$(basename $DEVPATH)
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,773 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod +libsqlite3
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+[ "$ACTION" = ifup ] || exit 0
+
+config_load voice_client
+config_get bindintf SIP bindintf
+
+[ "$INTERFACE" == "$bindintf" ] || exit 0
+
+. /lib/functions/network.sh
+
+if [ -n "$bindintf" ]; then
+	network_get_ipaddr bindaddr "$bindintf"
+	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
+	bindaddr="${bindaddr:-0.0.0.0}"
+	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
+	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
+fi
+

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions/network.sh
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+CONFDIR=/etc/asterisk
+
+init_asterisk() {
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "config reload $CONFDIR/sip.conf"
+	sleep 1
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

ated/Makefile

@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2016 inteno
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/ated
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbfdm/Config_bbfdm.in

@@ -1,23 +0,0 @@
-config BBF_VENDOR_EXTENSION
-	bool "Enable Vendor Extension"
-	default y
-
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
-	default y
-
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbfdm/Makefile

@@ -1,251 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.4.23
-
-USE_LOCAL:=0
-ifneq ($(USE_LOCAL),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=c10303fc51a1034cb87040e0eaf23c95d2b1c658
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
-	    +BBF_TR471:obudpst
-endef
-
-define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (default)
-  VARIANT:=default
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  VARIANT:=openssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  VARIANT:=wolfssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
-		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
-		   +PACKAGE_libbbfdm:libbbfdm
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR143 data models
-endef
-
-ifeq ($(USE_LOCAL),1)
-define Build/Prepare
-	$(CP) ~/git/bbfdm/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-	-DBBF_WIFI_DATAELEMENTS=ON
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-endef
-
-define Package/libbbfdm/default/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/97-firewall-service
-	$(INSTALL_BIN) ./files/etc/uci-defaults/99-link-core-plugins $(1)/etc/uci-defaults/99-link-core-plugins
-	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
-	$(INSTALL_BIN) ./files/etc/firewall.service $(1)/etc/firewall.service
-ifeq ($(CONFIG_BBF_TR143),y)
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-endif
-endef
-
-define Package/libbbfdm/default/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/bbfdm/input.json $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) ./files/etc/bbfdm/bbfdm_services.sh $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-endef
-
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
-Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	# Work around for backward compatibility
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
-endef
-
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))
-$(eval $(call BuildPackage,bbfdmd))
-
-$(eval $(call BuildPackage,userinterface))

bbfdm/bbfdm.mk

@@ -1,9 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-
-define BbfdmInstallPlugin
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/plugins/
-endef

bbfdm/files/etc/bbfdm/bbfdm_services.sh

@@ -1,47 +0,0 @@
-#!/bin/sh
-
-BBFDMD="/usr/sbin/bbfdmd"
-
-bbfdm_add_service()
-{
-	local name path
-
-	name="${1}"
-	path="${2}"
-
-	if [ -z "${name}" -o -z "$path" ]; then
-		return 0;
-	fi
-
-	ubus call service add "{'name':'bbfdm.services','instances':{'$name':{'command':['$BBFDMD','-m','$path']}}}"
-}
-
-bbfdm_stop_service()
-{
-	local name
-
-	name="${1}"
-	if [ -z "${name}" ]; then
-		return 0;
-	fi
-
-	if ubus call service list '{"name":"bbfdm.services"}' |grep -q "bbfdm.$name"; then
-		ubus call service delete "{'name':'bbfdm.services','instance':'bbfdm.$name'}"
-	fi
-}
-
-usages()
-{
-	echo "Usages $0: <OPTIONS>..."
-	echo
-	echo "    -h    show help"
-	echo "    -k    micro-service name to stop"
-	echo
-}
-
-while getopts "s:k:h" opts; do
-	case "$opts" in
-		h) usages; exit 0;;
-		k) bbfdm_stop_service "${OPTARG}";;
-	esac
-done

bbfdm/files/etc/bbfdm/input.json

@@ -1,28 +0,0 @@
-{
-        "daemon": {
-                "config": {
-                },
-                "input": {
-                        "type": "DotSo",
-                        "name": "/lib/libbbfdm.so",
-                        "plugin_dir": "/etc/bbfdm/plugins"
-                },
-                "output": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                }
-        },
-        "cli": {
-                "config": {
-                        "proto": "both",
-                        "instance_mode": 0
-                },
-                "input": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                },
-                "output": {
-                        "type": "CLI"
-                }
-        }
-}

bbfdm/files/etc/config/bbfdm

@@ -1,8 +0,0 @@
-
-config bbfdmd 'bbfdmd'
-	option enabled '1'
-	option loglevel '1'
-	option refresh_time '10'
-	option transaction_timeout '30'
-	option subprocess_level '2'
-

bbfdm/files/etc/config/userinterface

@@ -1,3 +0,0 @@
-config userinterface 'global'
-	option enable '1'
-

bbfdm/files/etc/firewall.portmap

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.dnat -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Now add rules as per datamodel precedence shown below
-		## Non empty remote host, empty dport
-		## empty remote host, non empty dport
-		## empty remote host, empty dport
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

bbfdm/files/etc/firewall.service

@@ -1,163 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.service -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-		echo "-1"
-		return 0
-	fi
-
-	echo "0"
-	return 0
-}
-
-add_iptable_rule() {
-	chain_name=$1
-	protocol=$2
-	dest_port=$3
-	icmp_type=$4
-	family=$5
-	src_prefix=$6
-	action=$7
-	res=-1
-
-	cmd="-I ${chain_name}"
-
-	if [ -n "${protocol}" ]; then
-		cmd="${cmd} -p $protocol"
-
-		if [ "${protocol}" -eq 41 ] || [ "${protocol}" -eq 43 ] || [ "${protocol}" -eq 44 ] ||
-		   [ "${protocol}" -eq 58 ] || [ "${protocol}" -eq 59 ] || [ "${protocol}" -eq 60 ]; then
-		   	# Explicit v6 protocols
-			if [ "${family}" = "ipv4" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv6"
-			fi
-		elif [ "${protocol}" -eq 1 ]; then
-		   	# Explicit v4 protocols
-			if [ "${family}" = "ipv6" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv4"
-			fi
-		fi
-
-		# Limitation:: iptables do not accept dport without specific protocol
-		count=$(echo "${dest_port}" | sed -n "/-1/p" | wc -l)
-
-		if [ "${count}" -eq 0 ]; then
-			# dest_port not contains -1 so need to have this match criteria
-			count=$(echo "${dest_port}" | wc -w)
-			if [ "${count}" -gt 1 ]; then
-				# multiple ports present
-				port=$(echo "${dest_port}" | sed "s/ /,/g")
-				cmd="${cmd} -m multiport --dports ${port}"
-			else
-				cmd="${cmd} --dport ${dest_port}"
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv4" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 1 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmp-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "iptables ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-		else
-			#Add ipv4 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 0 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "iptables -s $src_list ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv6" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 58 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmpv6-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "ip6tables ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-		else
-			#Add ipv6 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 1 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "ip6tables -s $src_list ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	echo $res
-}
-
-add_service() {
-	local enable proto family dest_port interface target icmp_type
-
-	config_get enable "$1" enable "0"
-	config_get icmp_type "$1" icmp_type "-1"
-	config_get target "$1" target "Accept"
-	config_get interface "$1" interface ""
-	config_get family "$1" family "-1"
-	config_get dest_port "$1" dest_port "-1"
-	config_get proto "$1" proto "-1"
-	config_get src_prefix "$1" src_prefix ""
-
-	if [ "${enable}" -eq 0 ] || [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	action=$(echo "${target}" | tr a-z A-Z)
-	chain_name="zone_${interface}_input"
-	res=0
-
-	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
-
-	if [ "${count}" -eq 0 ]; then
-		# proto not contains -1 so need to have this match criteria
-		for protocol in $proto; do
-			res=$(add_iptable_rule "$chain_name" "$protocol" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-		done
-	else
-		# proto contains -1 so no need to have this match criteria
-		res=$(add_iptable_rule "$chain_name" "" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-	fi
-
-	if [ "${res}" -ne 0 ]; then
-		uci -q set firewall."${1}".status="Error"
-	else
-		uci -q set firewall."${1}".status=""
-	fi
-
-	uci commit firewall
-}
-
-config_load firewall
-config_foreach add_service "service"

bbfdm/files/etc/firewall.userinterface

@@ -1,125 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="UI-REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ] || [ ! -f "/etc/config/nginx" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-delete_ui_firewall_rules() {
-	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-}
-
-configure_ui_firewall_rule() {
-	local sec="${1}"
-	local enabled access interface
-	local port=""
-
-	config_get_bool enabled "${sec}" uci_enable '1'
-	config_get access "${sec}" uci_access ""
-	config_get interface "${sec}" uci_interface ""
-
-	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
-		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
-		for item in ${port_list}; do
-			if [ -z "${item##[0-9]*}" ]; then
-				port="${item}"
-				break
-			fi
-		done
-
-		if [ -z "${port}" ]; then
-			return 0
-		fi
-
-		zone="zone_${interface}_input"
-		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		zone="zone_${interface}_output"
-		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-	fi
-}
-
-# Delete existing remote access rules
-delete_ui_firewall_rules
-
-config_load userinterface
-config_get_bool serv_enable global enable 1
-
-if [ "${serv_enable}" -eq "1" ]; then
-	config_load nginx
-	# Configure the User Interface rule
-	config_foreach configure_ui_firewall_rule server
-fi

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -1,76 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-BBFDM_TEMP_JSON="/tmp/bbfdm/input.json"
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enabled:bool:true' \
-		'sock:string' \
-		'debug:bool:false' \
-		'loglevel:uinteger:1' \
-		'refresh_time:uinteger:0' \
-		'transaction_timeout:uinteger:30' \
-		'subprocess_level:uinteger'
-}
-
-configure_bbfdmd()
-{
-	local enabled debug sock update
-	local jlog jrefresh jtimeout jlevel
-
-	update=0
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enabled}" -eq 0 ] && return 0
-
-	if [ -f "${BBFDM_JSON_INPUT}" ]; then
-		echo "$(jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} --arg level ${subprocess_level} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran, "subprocess_level": $level}' ${BBFDM_JSON_INPUT})" > ${BBFDM_TEMP_JSON}
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	mkdir -p /tmp/bbfdm
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-
-	ubus call service state '{"name":"bbfdm.services", "spawn":true}'
-}
-
-stop_service()
-{
-	ubus call service state '{"name":"bbfdm.services", "spawn":false}'
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/init.d/userinterface

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	if [ ! -f "/etc/config/nginx" ]; then
-		return 0
-	fi
-
-	if [ "${enable}" -eq "1" ]; then
-		ubus call service state '{"name":"nginx", "spawn":true}'
-	else
-		ubus call service state '{"name":"nginx", "spawn":false}'
-	fi
-
-	# Inject firewall rules
-	procd_open_instance userinterface
-	/etc/firewall.userinterface
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface" "nginx"
-}

bbfdm/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# This deletes the userinterface json plugin if exists in case of upgrade
-if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
-	rm /etc/bbfdm/json/UserInterface.json
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-
-	# Apply the changes
-	uci commit network
-	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/etc/uci-defaults/97-firewall-service

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.service_hook
-        set firewall.service_hook=include
-        set firewall.service_hook.path=/etc/firewall.service
-        set firewall.service_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/99-link-core-plugins

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-UNIFIED_PATH="/etc/bbfdm/plugins/"
-
-# Link JSON plugins
-for f in `ls -1 /etc/bbfdm/json/*.json`; do
-	echo "# BBFDM JSON plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-# Link DotSo plugins
-for f in `ls -1 /usr/lib/bbfdm/*.so`; do
-	echo "# BBFDM DotSO plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-exit 0
-

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -1 +0,0 @@
-/etc/nginx/allow_host_*

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

brcmslic/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.1
+PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
+PKG_NAME:=brcmslic
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/brcmslic
+  CATEGORY:=Utilities
+  TITLE:=Brcmslic
+  URL:=
+  DEPENDS:=
+endef
+
+define Package/brcmslic/description
+	Brcmslic
+endef
+
+
+define Package/brcmslic/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,brcmslic))

brcmslic/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

bulkdata/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2022 iopsys Software Solutions AB
-#
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.3
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=f556410b51a2248f11358793f11ae54d3e53e85e
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/	
-	$(INSTALL_DIR) $(1)/etc/bulkdata
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bulkdata
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/bulkdata/input.json

@@ -1,15 +0,0 @@
-{
-	"daemon": {
-		"input": {
-			"type": "JSON",
-			"name": "/etc/bulkdata/bulkdata.json"
-		},
-		"output": {
-			"type": "UBUS",
-			"name": "bbfdm.bulkdata",
-			"parent_dm": "Device.",
-			"object": "BulkData",
-			"root_obj": "bbfdm"
-		}
-	}
-}

bulkdata/files/etc/config/bulkdata

@@ -1,6 +0,0 @@
-
-config bulkdata 'bulkdata'
-	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
-	option log_level '3'
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,36 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=60
-STOP=10
-
-. /etc/bbfdm/bbfdm_services.sh
-
-USE_PROCD=1
-PROG="/usr/sbin/bulkdatad"
-BULKDATA_JSON_INPUT="/etc/bulkdata/input.json"
-
-start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	[ "$enable" -eq "1" ] && {
-		procd_open_instance "bulkdata"
-		procd_set_param command "$PROG"
-		procd_set_param respawn
-		procd_close_instance "bulkdata"
-	}
-
-	bbfdm_add_service "bbfdm.bulkdata" "${BULKDATA_JSON_INPUT}"
-}
-
-reload_service() {
-	stop
-	start 
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger bulkdata
-}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

capiagent/Makefile

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=capiagent
-PKG_VERSION:=2.1.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3e671db8f567b19c109fc13b25bc571c4c73a962
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/capiagent.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-#define Package/capiagent/config
-#  source "$(SOURCE)/Config.in"
-#endef
-
-define Package/capiagent
-  TITLE+= capiagent (daemon implementing Wi-Fi Alliance's CAPI commands)
-  DEPENDS= +libubox +libuci +libubus +libnl-genl +libeasy +libwifi \
-	   +libjson-c +libblobmsg-json +ubus +libieee1905
-endef
-
-define Package/capiagent/description
- This package provides agent for the WiFi Alliance's CAPI specification.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_PATH:=src
-
-
-define Package/capiagent/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi/capi
-	$(CP) $(PKG_BUILD_DIR)/src/capiagent $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/scripts/* $(1)/lib/wifi/capi
-endef
-
-$(eval $(call BuildPackage,capiagent))

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serialNumber)
+	hw=$(db get hw.board.hardware)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,61 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serialNumber)
+hw=$(db get hw.board.hardware)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 4
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=4.2.1.1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ae836adb0779979686d0dad34b941f319ffed1b8
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

decollector/files/deagent.init

@@ -1,30 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/deagent
-
-service_running() {
-	ubus -t 2 wait_for wifi ieee1905 ieee1905.map
-}
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "$PROG" "-d" "-t 10"
-	#procd_set_param stdout 1
-	#procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger wireless
-}

decollector/files/decollector.init

@@ -1,43 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/decollector
-
-service_running() {
-	ubus -t 2 wait_for ieee1905 ieee1905.map
-}
-
-start_service() {
-	sleep 3
-	[ -e "/etc/config/mapcontroller" ] && {
-		local en
-
-		config_load mapcontroller
-		config_get en controller enabled "0"
-		config_get collect_int controller de_collect_interval
-
-		[ -n "$collect_int" -a $collect_int -lt 30 ] &&  collect_int=""
-
-		[ $en -gt 0 ] && {
-			procd_open_instance
-			procd_set_param command "$PROG" "-d" "${collect_int:+-t $collect_int}"
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_set_param respawn
-			procd_close_instance
-		}
-	}
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger mapcontroller
-}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,19 +1,23 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=dectmngr
+PKG_RELEASE:=1
-PKG_RELEASE:=3
+PKG_VERSION:=1.0.23
-PKG_VERSION:=3.6.4
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d9cc11c81ce1ff625e4e789afa180b301c7fcf74
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
-PKG_MIRROR_HASH:=skip
+PKG_NAME:=dectmngr
-endif
 
-PKG_LICENSE:=PROPRIETARY
+
-PKG_LICENSE_FILES:=LICENSE
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
 
 RSTRIP:=true
 export BUILD_DIR
@@ -21,48 +25,42 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/$(PKG_NAME)
+define Package/dectmngr
-	CATEGORY:=Utilities
+  CATEGORY:=Utilities
- 	TITLE:=DECT Manager
+  TITLE:=Broadcom endpoint test application
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
 endef
 
-define Package/$(PKG_NAME)/description
+define Package/dectmngr/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
+	Dect proxy, manager and tools
 endef
 
-define Package/$(PKG_NAME)/config
+
-	source "$(SOURCE)/Config.in"
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
 endef
 
-ifeq ($(LOCAL_DEV),1)
+$(eval $(call BuildPackage,dectmngr))
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +1,3 @@
-config dect 'global'
+config dect 'dect'
- 	option log_dect_cmbs 'syslog'
+	option 'radio' 'auto'
-        option log_level 'realtime,warning,error'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/etc/init.d/dectmngr

@@ -1,137 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
-
-DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
-
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
-		sleep 1
-	done
-}
-
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-	local rxtun=
-
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
-
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
-
-	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
-
-	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	file)
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	esac
-
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	has_dect || return 0
-
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	ubus call dect reload
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
-}
-
-boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -0,0 +1,53 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.1.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
+PKG_NAME:=dectmngr2
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dslmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=43dec92b1c86be7859521da337e7bd1168848b26
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-  TARGET_PLATFORM=BROADCOM
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/xdsl \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,8 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-        commit firewall
-EOT

easy-soc-events/Makefile

@@ -1,110 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=easy-soc-events
-PKG_VERSION:=1.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
-PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-include $(INCLUDE_DIR)/package.mk
-
--include $(TOPDIR)/.config
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
-  LINUX_VERSION := 4.1.52
-  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
-  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
-  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
-  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
-  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
-endif
-
-
-define KernelPackage/easy-soc-events/default
-  SUBMENU:=Other modules
-endef
-
-define KernelPackage/easy-soc-events
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Helper module for netlink event notification
-  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
-  AUTOLOAD:=$(call AutoLoad,11,easyevent)
-endef
-
-define KernelPackage/easy-soc-events-test
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Test module for event notification through easyevent
-  DEPENDS+=+kmod-easy-soc-events
-  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
-endef
-
-
-define KernelPackage/easy-soc-events/description
-  This is a helper module to generate and pass netlink events from
-  kernel to user applications.
-endef
-
-#NOSTDINC_FLAGS :=
-
-ifdef CONFIG_PACKAGE_kmod-easy-soc-events
-  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
-endif
-
-LINUXINCLUDE += \
-		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
-		-Iarch/$(LINUX_KARCH)/include \
-		-Iarch/$(LINUX_KARCH)/include/generated \
-		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
-		-I$(LINUX_DIR)/include/generated/uapi \
-		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
-		-include ./include/linux/kconfig.h
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-endef
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		$(PKG_MAKE_FLAGS) \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		LINUXINCLUDE="$(LINUXINCLUDE)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		modules
-endef
-
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-define KernelPackage/easy-soc-events/install-extra
-	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
-endef
-endif
-
-define KernelPackage/easy-soc-events/install
-	$(call KernelPackage/easy-soc-events/install-extra)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
-	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
-endef
-
-$(eval $(call KernelPackage,easy-soc-events-test))
-$(eval $(call KernelPackage,easy-soc-events))

endptcfg/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptcfg/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

ethmngr/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2020 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b81d06867d895245ef47004c6949f9d6dedd10ef
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ethmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
-endef
-
-define Package/ethmngr/description
- This package can be used to configure and provide status about
- the ethernet interfaces and ports through UBUS.
- It uses APIs from the libethernet.so library.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
-
-define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
-endef
-
-$(eval $(call BuildPackage,ethmngr))

ethmngr/files/etc/init.d/ethmngr

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger network
-}

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

fdtextract/Makefile

@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fping
+PKG_VERSION:=4.0
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fping.org/dist/
+PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
+
+PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fping
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
+  URL:=http://fping.org/
+endef
+
+
+define Package/fping/description
+	fping is a ping like program which uses the Internet Control Message Protocol
+	(ICMP) echo request to determine if a target host is responding.  fping
+	differs from ping in that you can specify any number of targets on the command
+	line, or specify a file containing the lists of targets to ping.  Instead of
+	sending to one target until it times out or replies, fping will send out a
+	ping packet and move on to the next target in a round-robin fashion.
+endef
+
+CONFIGURE_ARGS+= \
+	--enable-ipv4 \
+	--enable-ipv6
+
+TARGET_CFLAGS += -std=gnu99
+
+define Package/fping/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fping))

fscryptctl/Makefile

@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fscryptctl
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/google/fscryptctl.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Encryption
-  TITLE:=Fscryptctl
-endef
-
-define Package/$(PKG_NAME)/description
-	fscryptctl is a low-level tool written in C that handles raw keys and manages policies for Linux filesystem encryption,
-	specifically the "fscrypt" kernel interface which is supported by the ext4, f2fs, and UBIFS filesystems
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		fscryptctl
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fscryptctl $(1)/usr/bin/fscryptctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -1,66 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
-  PKG_LICENSE:=GPLv2
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,330 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	} else {
-		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	}
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	}
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");