inteno-netmode: update repo hash

/sbin/fatrace -c -t -f W |  grep "/etc/"

produced no output until internal printf buffer full and that is not so
useful.

4g-support/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	interface=$(cat $usb_dir/interface)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+#devno=$(basename $DEVPATH)
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,773 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod +libsqlite3
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+[ "$ACTION" = ifup ] || exit 0
+
+config_load voice_client
+config_get bindintf SIP bindintf
+
+[ "$INTERFACE" == "$bindintf" ] || exit 0
+
+. /lib/functions/network.sh
+
+if [ -n "$bindintf" ]; then
+	network_get_ipaddr bindaddr "$bindintf"
+	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
+	bindaddr="${bindaddr:-0.0.0.0}"
+	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
+	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
+fi
+

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions/network.sh
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+CONFDIR=/etc/asterisk
+
+init_asterisk() {
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "config reload $CONFDIR/sip.conf"
+	sleep 1
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

brcmslic/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.1
+PKG_SOURCE_URL:=git@private.inteno.se:brcmslic
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=837ec19e37650e424e77c921672a0806e198ba7b
+PKG_NAME:=brcmslic
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/brcmslic
+  CATEGORY:=Utilities
+  TITLE:=Brcmslic
+  URL:=
+  DEPENDS:=
+endef
+
+define Package/brcmslic/description
+	Brcmslic
+endef
+
+
+define Package/brcmslic/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/brcmslic $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endpt $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,brcmslic))

dectmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.23
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=dafaf749e89d1efaa7eb02709a3c0ef3e813c052
+PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
 PKG_NAME:=dectmngr2
 
 

endptcfg/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

endptmngr/Makefile

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=0cb8accbac3355b97a17064ec7da010a2c42db7b
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@private.inteno.se:endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_NAME:=endptmngr
-endif
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
-endef
-
-endif
-
-
-define Package/endptmngr/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))

ice-client/Makefile

@@ -19,21 +19,20 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.1.1
-PKG_RELEASE:=
-PKG_VERSION:=$(BASE_PKG_VERSION)$(PKG_RELEASE)_$(DATE)_$(LOGIN)
+BASE_PKG_VERSION:=5.0.1
+PKG_RELEASE:=RC0
+PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=e8bf50630e6ba12dc2d223112643077c4db49189
+PKG_SOURCE_VERSION:=4a0ebce9e55b0bd9b44bfe5e96e820336cc9dc0f
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-SKIPHASH=1
-export SKIPHASH
 else
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
@@ -132,12 +131,12 @@ endef
 
 ifeq ($(CONFIG_ICE_OPEN),y)
 define Package/ice-client/install
-	#$(INSTALL_DIR) $(1)/bin
-	#$(INSTALL_DIR) $(1)/etc
-	#$(INSTALL_DIR) $(1)/usr
-	#$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
-	#$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
-	#$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
 endef
 else
 define Package/ice-client/install

icwmp/Config.in

@@ -15,21 +15,33 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
-config XMPP_ENABLE
-	bool "enable xmpp feature"
-	default n
+choice
+	prompt "enable xmpp feature"
+	default disable
 
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
 
-config LIBDATAMODEL_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_Inteno_SE_"
-    
 endif
-

icwmp/Config_datamodel.in

@@ -1,7 +0,0 @@
-if PACKAGE_libdatamodel
-
-config UPNP_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2018-07-16
+PKG_VERSION:=3.0-2017-11-24
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d22821b251277584cfbcce98a98a4261813418ce
+PKG_SOURCE_VERSION:=d74b88913f676ebf9a210c4674555d080e57ff52
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -30,19 +30,11 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/libdatamodel
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-endef
-
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
 endef
 
 define Package/icwmp/description
@@ -64,11 +56,7 @@ define Package/icwmp-zstream
 endef
 
 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
-endef
-
-define Package/libdatamodel/config
-	source "$(SOURCE)/Config_datamodel.in"
+	source "$(SOURCE)/Config.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -78,12 +66,10 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+ifeq ($(CONFIG_TARGET_IBOARDID),"EX400")
 TARGET_CFLAGS += -DEX400
 endif
 
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -103,17 +89,10 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
-ifeq ($(CONFIG_UPNP_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-upnptr064
-endif
-	
-ifeq ($(CONFIG_XMPP_ENABLE),y)
-CONFIGURE_ARGS += \
-	--enable-xmpp
-endif
-	
+
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -145,44 +124,30 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-define Package/libdatamodel/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
-endef
-
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(CP) ./files/icwmp.hotplug $(1)/etc/hotplug.d/iface/90-icwmp
 ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(INSTALL_DIR) $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
-	$(CP) ./files/* $(1)/
 endef
 
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
-endef
-
-
 define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
 	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
@@ -204,5 +169,4 @@ endef
 
 
 $(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,77 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && exit 0
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-set_cwmp_reqopts

icwmp/files/icwmp.hotplug

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+grep -q "Designated" /etc/banner || exit 0
+
+. /lib/functions/network.sh
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+local islan="$(uci -q get network.$INTERFACE.is_lan)"
+[ "$islan" == "1" ] && exit 0
+
+local proto="$(uci -q get network.$INTERFACE.proto)"
+[ "$proto" == "none" ] && exit 0
+
+local ifname="$(uci -q get network.$INTERFACE.ifname)"
+[ "${ifname:0:1}" == "@" ] && exit 0
+
+mkdir -p /tmp/ipv4
+
+local previpaddr=""
+local curipaddr=""
+local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+previpaddr=$(cat $ipaddrfile 2>/dev/null)
+network_get_ipaddr curipaddr $INTERFACE
+[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+local prevgateway=""
+local curgateway=""
+local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+prevgateway=$(cat $gatewayfile 2>/dev/null)
+network_get_gateway curgateway $INTERFACE
+[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+local prevsubnets=""
+local cursubnets=""
+local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+prevsubnets=$(cat $subnetsfile 2>/dev/null)
+network_get_subnets cursubnets $INTERFACE
+[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" ] && exit 0
+
+[ -f /etc/config/cwmp ] && /etc/init.d/icwmpd reload &
+

imonitor/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2018 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_SOURCE_PROTO=git
-PKG_SOURCE_URL:=http://public.inteno.se/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/imonitor
-	CATEGORY:=Utilities
-	TITLE:=Inteno process supervisor
-	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
-endef
-
-define Package/imonitor/description
-	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
-endef
-
-define Package/imonitor/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-endef
-
-$(eval $(call BuildPackage,imonitor))

imonitor/files/etc/config/imonitor

@@ -1,9 +0,0 @@
-config monitor
-	option app 'test'
-	option test 'echo test'
-	option stream 'stdout'
-	option string_match 'TEST'
-	option execute 'echo executing test'
-	option interval '10'
-	option nr_tests '2'
-

imonitor/files/etc/init.d/imonitor

@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the imonitor
-#
-
-START=99
-STOP=01
-
-USE_PROCD=1
-NAME=imonitor
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "imonitor"
-	procd_set_param stdout 1
-        procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop() {
-	service_stop imonitor
-}
-
-reload_service() {
-	stop
-	start
-}
-

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=f81c146f0b07540877545e5ab644ec8e29905a4d
+PKG_SOURCE_VERSION:=92f918d26c0ffc22d1704f5ea6cbb0bd7fdbdab9
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/inbd
 

inteno-netmodes/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=inteno-netmodes
-PKG_VERSION:=0.2.0
+PKG_VERSION:=0.1.0
 
-PKG_SOURCE_VERSION:=fbd7dcfab03df19b3c32675940e0aee708c7cf75
+PKG_SOURCE_VERSION:=8c97bebc03c1c61553c30b9fcdcd63bf9abe439d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/netmoded
 
@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inteno-netmodes
 	CATEGORY:=Base system
-	DEPENDS:=+fping +ubus +libubox +libuci
+	DEPENDS:=+fping +ubus +libubox
 	TITLE:=Predefined Network Modes
 endef
 
@@ -29,8 +29,6 @@ endef
 
 define Package/inteno-netmodes/install
 	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netmoded $(1)/sbin/
 endef
 
 $(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,46 +2,118 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
-. /lib/functions.sh
 . /lib/functions/network.sh
-. /lib/functions/netmode.sh
-
-network_flush_cache
-network_get_ipaddr ipaddr $INTERFACE
-[ -z "$ipaddr" ] && exit
 
+network_get_ipaddr ip $INTERFACE
 repeaterready="$(uci -q get netmode.setup.repeaterready)"
-curmode="$(uci -q get netmode.setup.curmode)"
 
-if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
-	if [ "$repeaterready" == "1" -o "${curmode:0:8}" == "repeater" ]; then
-		# flush the ip on br-lan; br-lan will anyhow be deleted.
-		# this is needed if the ip received on the wan is also from the same net
-		logger -s -p user.info -t $0: [netmode] ip addr flush dev br-lan >/dev/console
-		ip addr flush dev br-lan 2>/dev/null
+[ -z "$ip" ] && exit
 
-		# flush iptables in case the MASTER
-		# tries to configure us before
-		# firewall is disabled the proper way
-		logger -s -p user.info -t $0: [netmode] iptables -F >/dev/console
-		iptables -F
-
-		disable_firewall 1
+toggle_firewall() {
+	local section=$1
+	local disable=$2
+	config_get name "$1" name
+	if [ "$name" == "wan" ]; then
+		uci -q set firewall.settings.disabled=$disable
+		if [ "$disable" == "1" ]; then
+			uci -q set firewall.$section.input="ACCEPT"
+		else
+			uci -q set firewall.$section.input="REJECT"
+		fi
+		uci -q commit firewall
 	fi
-else
-	disable_firewall 0
-fi
+}
 
-case "$curmode" in
-		repeater*)
-		;;
-		*)
-			[ "$repeaterready" == "1" ] || return
-			if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
-				wificontrol_takes_over || switch_netmode repeater
-			else
-				switch_netmode routed
-			fi
-		;;
+set_disabled() {
+	config_load firewall
+	config_foreach toggle_firewall zone $1
+	/etc/init.d/firewall reload
+}
+
+is_inteno_macaddr()
+{
+	macaddr=$1
+
+	echo $macaddr | grep -i -e "^00:22:07" \
+				-e "^02:22:07" \
+				-e "^44:D4:37" \
+				-e "^00:0C:07" \
+				-e "^02:0C:07" \
+				-e "^06:0C:07" \
+				-e "^00:0C:43" \
+				-e "^02:0C:43" \
+				-e "^06:0C:43" \
+	&& return
+	false
+}
+
+switch_mode() {
+	[ "$repeaterready" == "1" ] || return
+
+	# flush the ip on br-lan; br-lan will anyhow be deleted.
+	# this is needed if the ip received on the wan is also from the same net
+	ip addr flush dev br-lan
+
+	# flush iptables in case the MASTER
+	# tries to configure us before
+	# firewall is disabled the proper way
+	iptables -F
+
+	ubus call leds set  '{"state" : "allflash"}'
+
+	local ret=0
+	# let netmode-conf up to 20 seconds before switching mode
+	for tm in 2 4 6 8; do
+		if [ -f /tmp/wificontrol.txt ]; then
+			ret=1
+			break
+		fi
+		sleep $tm
+	done
+
+	# let netmode-conf take over
+	[ $ret -eq 1 ] && return
+
+	# go head with switching mode
+	touch -f /tmp/switching_mode
+	echo "Switching to 'extender' mode" > /dev/console
+	uci -q set netmode.setup.curmode='repeater'
+	uci set netmode.setup.repeaterready=0
+	uci commit netmode
+	/etc/init.d/netmode reload
+	echo "Restarting network services" > /dev/console
+	ubus call network reload
+	wifi reload nodat
+	ubus call router.network reload
+	ubus call leds set  '{"state" : "normal"}'
+	rm -f /tmp/switching_mode
+}
+
+test_ip() {
+	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
+		# private IP
+		switch_mode
+		set_disabled 1
+	else
+		# public IP
+		set_disabled 0
+		[ "$1" -eq "1" ] && {
+			uci set netmode.setup.repeaterready=0
+			uci commit netmode
+			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
+			[ "$pid" != "" ] && kill -9 $pid
+			pid="$(pidof netmode-client-detect)"
+			[ "$pid" == "" ] && /sbin/netmode-client-detect &
+
+			# set default JUCI page to overview
+			uci -q set juci.juci.homepage="overview"
+			uci commit juci
+		}
+	fi
+}
+
+case "$(uci -q get netmode.setup.curmode)" in
+		repeater*) test_ip ;;
+		*) [ "$repeaterready" == "1" ] && test_ip 1;;
 esac
 

inteno-netmodes/files/etc/hotplug.d/iface/05-testnet

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" == "ifup" -o "$ACTION" == "ifdown" ] || exit 0
-
-interface_check() {
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local defroute="$(uci -q get network.$INTERFACE.defaultroute)"
-	[ "$defroute" == "0" ] && exit 0
-}
-
-interface_check
-if [ -n "$(pidof testnet)" ]; then
-	testnet once
-else
-	testnet &
-fi
-

inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange

@@ -5,9 +5,10 @@
 . /lib/functions.sh
 . /lib/functions/network.sh
 
-LOCKFILE="/tmp/70-shiftrange.lock"
-RESTRICTED_NETS=""
-ALL_NETS=""
+local lockfile="/tmp/70-shiftrange.lock"
+local restricted_nets=""
+local all_nets=""
+
 
 #####
 ##### initial functions
@@ -29,8 +30,8 @@ initial_check()
 
 finish()
 {
-    lock -u $LOCKFILE
-    rm -f $LOCKFILE
+    lock -u $lockfile
+    rm -f $lockfile
 }
 
 # just one instance of this script at a time
@@ -40,13 +41,13 @@ just_one_instance()
 	local limit=10
 
 	#wait for the lock to become free
-	while [ -e $LOCKFILE ] ; do
+	while [ -e $lockfile ] ; do
 		sleep 1
 		counter=$((counter + 1))
 		[ "$counter" -gt "$limit" ] && exit 1
 	done
 
-	lock $LOCKFILE
+	lock $lockfile
 	trap finish EXIT INT TERM
 }
 
@@ -94,7 +95,7 @@ next_network_address()
 	local ip4=${ip%%/*}
 
 	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local one="$((1 << (32-$prefix)))"
+	local one=$((1 << (32-$prefix)))
 	local new=$(($ip + $one))
 
 	local n1=$((($new & 0xFF000000) >> 24))
@@ -134,7 +135,7 @@ shift_range()
 {
 	local net="$1"
 	while true ; do
-		if [ "$RESTRICTED_NETS" == "${RESTRICTED_NETS//$net/}" ] && [ "$ALL_NETS" == "${ALL_NETS//$net/}" ]; then
+		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] && [ "$all_nets" == "${all_nets//$net/}" ]; then
 			# found a net that is not in restricted nets nor in all nets
 			break
 		fi
@@ -149,8 +150,8 @@ shift_range()
 ##### parse all interfaces section
 #####
 
-# RESTRICTED_NETS = all the IPs on wan interfaces
-# ALL_NETS = all the IPs on any interface
+# restricted_nets = all the IPs on wan interfaces
+# all_nets = all the IPs on any interface
 parse_interface()
 {
 	local interface=$1
@@ -164,13 +165,13 @@ parse_interface()
 		networks="$networks $(get_network_address $n)"
 	done
 
-	[ "$is_lan" != "1" ] && RESTRICTED_NETS="$RESTRICTED_NETS $networks"
-	ALL_NETS="$ALL_NETS $networks"
+	[ "$is_lan" != "1" ] && restricted_nets="$restricted_nets $networks"
+	all_nets="$all_nets $networks"
 }
 
 # parse all the interfaces
 # get all the IPs on wan interfaces and store them in restrict_nets
-# get all the IPs on all interfaces and store them in ALL_NETS
+# get all the IPs on all interfaces and store them in all_nets
 parse_interfaces()
 {
 	config_foreach parse_interface "interface"
@@ -198,14 +199,14 @@ parse_lan()
 	for ip in $ips ; do
 		net="$(get_network_address $ip)"
 
-		if [ "$RESTRICTED_NETS" == "${RESTRICTED_NETS//$net/}" ] ; then
+		if [ "$restricted_nets" == "${restricted_nets//$net/}" ] ; then
 			# net is not in restricted nets
 			# append ip to newips
 			[ -z "$newips" ] && newips="${ip%/*}" ||  newips="$newips ${ip%/*}"
 			continue
 		fi
 
-		#net is in RESTRICTED_NETS
+		#net is in restricted_nets
 		local newnet=$(shift_range $net)
 		local newip="$(first_host_in_network $newnet)"
 		# append newip to newips
@@ -228,6 +229,7 @@ parse_lans()
 	config_foreach parse_lan "interface"
 }
 
+
 #####
 ##### main
 #####

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -1,27 +1,102 @@
 #!/bin/sh
 
 . /lib/functions.sh
-. /lib/functions/netmode.sh
+include /lib/network
 
 ps | grep hotplug | grep button && exit
 
-[ -z "$INTERFACE" ] && exit
+MTK=0
+[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
+
+WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
+[ $MTK -eq 1 ] && WANDEV="eth0.2"
+
+[ "$INTERFACE" != "$WANDEV" ] && exit
 
 defroute=$(ip route | grep default | awk '{print$3}')
 
 case "$(uci get netmode.setup.curmode)" in
 		repeater*)
+			echo "Preparing to switch mode"
 		;;
 		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || {
-				logger -s -t "80-repeater" "ping to $defroute failed, sending USR1 to udhcpc" >/dev/console
-				killall -USR1 udhcpc
-			}
+			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
 			exit
 		;;
 esac
 
+get_wifi_wet_interface() {
+	handle_interface() {
+		config_get mode "$1" mode
+		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
+			config_get ifname "$1" ifname
+			echo "$ifname"
+		fi
+	}
+	config_load wireless
+	config_foreach handle_interface wifi-iface
+}
+
+get_wifi_iface_cfgstr() {
+	get_cfgno() {
+		config_get ifname "$1" ifname
+		[ "$ifname" == "$2" ] && echo "wireless.$1"
+	}
+	config_load wireless
+	config_foreach get_cfgno wifi-iface $1
+}
+
+link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
+[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
+
 case "$ACTION" in
-	add|register|remove|unregister) correct_uplink $INTERFACE;;
+	add|register)
+		[ "$link" == "down" ] && return
+		ubus call leds set  '{"state" : "allflash"}'
+		echo "Autoswitch to Extender mode" > /dev/console
+		sleep 2
+		wetif="$(get_wifi_wet_interface)"
+		# remove wifi client interface
+		case "$(uci get netmode.setup.curmode)" in
+			repeater*)
+				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
+			;;
+		esac
+		uci commit wireless
+		#add wan ethernet port
+		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		uci commit network
+		ubus call network reload
+		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss down 2>/dev/null
+		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
+		ubus call router.network reload
+		ubus call leds set  '{"state" : "normal"}'
+	;;
+	remove|unregister)
+		[ "$link" == "up" ] && return
+		ubus call leds set  '{"state" : "allflash"}'
+		echo "Autoswitch to Repeater mode" > /dev/console
+		sleep 2
+		wetif="$(get_wifi_wet_interface)"
+		# add wifi client interface
+		case "$(uci get netmode.setup.curmode)" in
+			repeater*)
+				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
+			;;
+		esac
+		uci commit wireless
+		#remove wan ethernet port
+		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		uci commit network
+		ubus call network reload
+		[ -f /usr/sbin/wlctl ] && wlctl -i $wetif bss up 2>/dev/null
+		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
+			killall -9 wifi
+			wifi reload nodat
+			killall -USR1 udhcpc
+		}
+		ubus call router.network reload
+		ubus call leds set  '{"state" : "normal"}'
+	;;
 esac
 

inteno-netmodes/files/etc/init.d/netmode

@@ -3,39 +3,321 @@
 START=10
 USE_PROCD=1
 
-NETMODED="/sbin/netmoded"
+TMPDIR=/var/netmodes
+OLD_MODE_FILE=/var/netmodes/old_mode
 
-. /lib/functions.sh
-. /lib/functions/netmode.sh
+. /usr/share/libubox/jshn.sh
+. /lib/network/config.sh
 
-start_netmoded() {
-	procd_open_instance
-	procd_set_param command $NETMODED
+local modedir=$(uci -q get netmode.setup.dir)
+[ -n "$modedir" ] || modedir="/etc/netmodes"
 
-	procd_append_param command --verbose warning
-	procd_set_param stdout 1
-	procd_set_param stderr 1
+get_device() {
+	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
+	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
+        local cnt=1
+        local idx=0
 
-	procd_set_param respawn
-	procd_close_instance
+	local pnum=$(echo $PORT_NAMES | wc -w)
+
+	if [ $pnum -le 2 ]; then
+		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
+	fi
+
+	# get index of interface name
+	for i in $PORT_NAMES; do
+		if [ "$i" == "$1" ]; then
+			idx=$cnt
+		fi
+		cnt=$((cnt+1))
+	done
+
+        # get port name from index
+	cnt=1
+	for i in $PORT_ORDER; do
+		if [ "$cnt" == "$idx" ]; then
+			echo $i
+		fi
+		cnt=$((cnt+1))
+	done
+}
+
+populate_netmodes() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+	local curmode
+
+	config_load netmode
+
+	config_get curmode setup curmode
+
+	mkdir -p $TMPDIR
+
+	if [ "$curmode" == "routed" ]; then
+		local hw="$(db -q get hw.board.hardware)"
+		if [ "$hw" == "EX400" ]; then
+			curmode="routed_mtk"
+		else
+			curmode="routed_brcm"
+		fi
+	fi
+
+	echo $curmode > $OLD_MODE_FILE
+
+	delete_netmode() {
+		uci delete netmode.$1
+	}
+
+	config_foreach delete_netmode netmode
+	uci commit netmode
+
+	wan=$(get_device WAN)
+	lan1=$(get_device LAN1)
+	lan2=$(get_device LAN2)
+	lan3=$(get_device LAN3)
+	lan4=$(get_device LAN4)
+	lan5=$(get_device LAN5)
+
+	for file in $(find $modedir -type f); do
+		conf="$(echo $file | cut -d'/' -f5)"
+		if [ "$conf" == "layer2_interface_ethernet" ]; then
+			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+		fi
+		if [ "$conf" == "network" ]; then
+			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
+			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
+			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
+			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
+
+			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
+			uci -q set $file.wan.ifname="$ifname"
+			uci -q commit $file
+		fi
+	done
+
+	local hardware=$(db get hw.board.hardware)
+	local keys lang desc exp exclude
+	for mode in $(ls $modedir); do
+
+			case "$mode" in
+				repeater*)
+					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
+				;;
+			esac
+
+			lang=""
+			desc=""
+			exp=""
+			uci -q set netmode.$mode=netmode
+			json_load "$(cat $modedir/$mode/DETAILS)"
+
+			if json_select excluded_boards; then
+				exclude=0
+				_i=1
+				while json_get_var board $_i; do
+					case "$hardware" in
+						$board)
+							uci -q delete netmode.$mode
+							exclude=1
+							break
+						;;
+					esac
+					_i=$((_i+1))
+				done
+				json_select ..
+				[ $exclude -eq 1 ] && continue
+			fi
+
+			if json_select acl; then
+				_i=1
+				while json_get_var user $_i; do
+					uci add_list netmode.$mode._access_r="$user"
+					_i=$((_i+1))
+				done
+				json_select ..
+			fi
+
+			json_select description
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var desc $lang
+				uci -q set netmode.$mode."desc_$lang"="$desc"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
+				json_select ..
+			done
+			json_select ..
+
+			json_select explanation
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var exp $lang
+				uci -q set netmode.$mode."exp_$lang"="$exp"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
+				json_select ..
+			done
+			json_select ..
+
+			json_get_var cred credentials
+			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var ulb uplink_band
+			uci -q set netmode.$mode.uplink_band="$ulb"
+			json_get_var reboot reboot
+			uci -q set netmode.$mode.reboot="$reboot"
+	done
+
+	config_get curmode setup curmode
+	[ -d /etc/netmodes/$curmode ] || {
+		[ "$(db -q get hw.board.hardware)" == "EX400" ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
+	}
+
+	uci commit netmode
+}
+
+switch_netmode() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	local netreload="$1"
+	local curmode conf repeaterready old_mode
+
+	config_load netmode
+
+	config_get curmode setup curmode
+
+	config_get repeaterready setup repeaterready "0"
+	if [ "$repeaterready" == "1" ] ; then
+		uci -q set netmode.setup.repeaterready="0"
+		uci commit netmode
+	fi
+
+	if [ "$curmode" == "repeater" ]; then
+		local hw="$(db -q get hw.board.hardware)"
+		if [ "$hw" == "EX400" ]; then
+			curmode="repeater_mtk_5g_up_dual_down"
+		else
+			curmode="repeater_brcm_2g_up_dual_down"
+		fi
+		uci set netmode.setup.curmode="$curmode"
+		uci commit netmode
+	fi
+	if [ "$curmode" == "routed" ]; then
+		local hw="$(db -q get hw.board.hardware)"
+		if [ "$hw" == "EX400" ]; then
+			curmode="routed_mtk"
+		else
+			curmode="routed_brcm"
+		fi
+		uci set netmode.setup.curmode="$curmode"
+		uci commit netmode
+	fi
+
+	old_mode=`cat $OLD_MODE_FILE 2>/dev/null`
+
+        # if curmode has not changed do not copy configs
+        if [ "$curmode" == "$old_mode" ]; then
+                /etc/init.d/enviroment reload
+                return
+        fi
+
+        echo $curmode >$OLD_MODE_FILE
+
+	[ -d "/etc/netmodes/$curmode" ] || return
+	cp /etc/netmodes/$curmode/* /etc/config/
+	rm -f /etc/config/DETAILS
+	sync
+	local reboot=$(uci -q get netmode.$curmode.reboot)
+	local askcred=$(uci -q get netmode.$curmode.askcred)
+	if [ "$reboot" == "0" ]; then
+		/etc/init.d/enviroment reload
+		case "$curmode" in
+			routed*)
+				ubus call uci commit '{"config":"network"}'
+			;;
+			repeater*)
+				if [ -f /etc/init.d/omcproxy ]; then
+					/etc/init.d/omcproxy stop
+				fi
+				if [ "$netreload" != "0" ]; then
+					ubus call uci commit '{"config":"network"}'
+				fi
+			;;
+		esac
+	else
+		reboot &
+	fi
+}
+
+start_client_listener() {
+	local curmode repeaterready ulcpid
+
+	config_load netmode
+	config_get repeaterready setup repeaterready 0
+
+	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
+
+	[ $repeaterready -eq 1 ] && {
+		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+		kill -9 $ulcpid >/dev/null 2>&1
+		return
+	}
+
+	config_get curmode setup curmode
+
+	case "$curmode" in
+		repeater*)
+			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+			kill -9 $ulcpid >/dev/null 2>&1
+		;;
+		*)
+			pidof netmode-client-detect || /sbin/netmode-client-detect &
+		;;
+	esac
+}
+
+start_netmode_discover() {
+	local curmode repeaterready
+
+	killall -9 netmode-discover >/dev/null 2>&1
+
+	config_load netmode
+	config_get repeaterready setup repeaterready 0
+
+	[ $repeaterready -eq 1 ] && return
+
+	config_get curmode setup curmode
+
+	case "$curmode" in
+		repeater*)
+			/sbin/netmode-discover &
+		;;
+	esac
 }
 
 start_service() {
 	populate_netmodes
-
-	start_netmoded
-	start_netmode_tools
+	start_client_listener
+	start_netmode_discover
 }
 
 reload_service() {
-        switch_netmode
+        switch_netmode "$1"
 
-	start_netmoded
-	start_netmode_tools
+	# set default JUCI page to overview
+	uci -q set juci.juci.homepage="overview"
+	uci commit juci
+
+	start_client_listener
+	start_netmode_discover
 }
 
 stop_service() {
-	stop_netmode_tools
+	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+	killall -9 netmode-discover >/dev/null 2>&1
 }
 
 service_triggers()

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -11,8 +11,7 @@
 	"excluded_boards" : [
 		"CG300",
 		"CG301",
-		"EX400",
-		"SDX810-AP"
+		"EX400"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -28,39 +28,10 @@ config interface 'iptv'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
 	option defaultroute '0'
 
 config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-
-config device 'ethtv'
-	option type '8021q'
-	option name '$WAN.100'
-	option ifname '$WAN'
-	option vid '100'
-	option priority '0'
-
-config device 'ptmtv'
-	option type '8021q'
-	option name 'ptm0.100'
-	option ifname 'ptm0'
-	option vid '100'
-	option priority '0'
-

inteno-netmodes/files/etc/netmodes/bridged/wireless

@@ -51,7 +51,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +90,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -12,8 +12,7 @@
 		"CG300",
 		"CG301",
 		"EX400",
-		"F*",
-		"SDX810-AP"
+		"F*"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network

@@ -28,7 +28,7 @@ config interface 'iptv'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
 	option defaultroute '0'
 
 config interface 'voip'
@@ -36,53 +36,10 @@ config interface 'voip'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.200 $WAN.200'
+	option ifname 'ptm0.200 atm2.1 $WAN.200'
 	option defaultroute '0'
 
 config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-
-config device 'ethtv'
-	option type '8021q'
-	option name '$WAN.100'
-	option ifname '$WAN'
-	option vid '100'
-	option priority '0'
-
-config device 'ptmtv'
-	option type '8021q'
-	option name 'ptm0.100'
-	option ifname 'ptm0'
-	option vid '100'
-	option priority '0'
-
-config device 'ethvoip'
-	option type '8021q'
-	option name '$WAN.200'
-	option ifname '$WAN'
-	option vid '200'
-	option priority '0'
-
-config device 'ptmvoip'
-	option type '8021q'
-	option name 'ptm0.200'
-	option ifname 'ptm0'
-	option vid '200'
-	option priority '0'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless

@@ -51,7 +51,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +90,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS

@@ -12,7 +12,6 @@
 		"DG40*",
 		"EG40*",
 		"EX40*",
-		"SDX*",
 		"F*"
 	],
 	"uplink_band" : "b",

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network

@@ -13,8 +13,3 @@ config interface 'wan'
 	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
 	option reqopts '43'
 
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless

@@ -51,7 +51,7 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
+	option autoconf '1'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -89,5 +89,5 @@ config wifi-iface
 	option cipher 'auto'
 	option wps_pbc '0'
 	option wmf_bss_enable '1'
-	option ifname 'wl1'
+	option autoconf '1'
 

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS

@@ -12,7 +12,6 @@
 		"DG40*",
 		"EG40*",
 		"EX40*",
-		"SDX*",
 		"F*"
 	],
 	"uplink_band" : "b",

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network

@@ -13,8 +13,3 @@ config interface 'wan'
 	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
 	option reqopts '43'
 
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless

@@ -51,7 +51,7 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
+	option autoconf '1'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -104,5 +104,5 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
+	option autoconf '1'
 

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network

@@ -7,7 +7,6 @@ config interface 'loopback'
 config device 'lan_dev'
 	option name 'eth0.1'
 	option macaddr '$MACLAN'
-	option vid 1
 
 config interface 'wan'
 	option type 'bridge'
@@ -20,7 +19,6 @@ config interface 'wan'
 config device 'wan_dev'
 	option name 'eth0.2'
 	option macaddr '$MACWAN'
-	option vid 2
 
 config interface 'wan6'
 	option ifname '@wan'

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -12,7 +12,6 @@
 		"F*"
 	],
 	"uplink_band" : 'a',
-	"downlink_band" : 'a b',
 	"credentials" : 1,
 	"reboot" : 0
 }

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network

@@ -7,7 +7,6 @@ config interface 'loopback'
 config device 'lan_dev'
 	option name 'eth0.1'
 	option macaddr '$MACLAN'
-	option vid 1
 
 config interface 'wan'
 	option type 'bridge'
@@ -20,7 +19,6 @@ config interface 'wan'
 config device 'wan_dev'
 	option name 'eth0.2'
 	option macaddr '$MACWAN'
-	option vid 2
 
 config interface 'wan6'
 	option ifname '@wan'

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/routed_brcm/DETAILS

@@ -8,8 +8,7 @@
 		{ "sv" : "" }
 	],
 	"excluded_boards" : [
-		"EX4*",
-		"SDX810-AP"
+		"EX4*"
 	],
 	"credentials" : 0
 }

inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_adsl

@@ -0,0 +1,13 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+

inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/routed_brcm/network

@@ -27,18 +27,3 @@ config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/routed_brcm/wireless

@@ -51,7 +51,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +90,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/routed_mtk/network

@@ -11,24 +11,20 @@ config interface 'lan'
 	option ipaddr '192.168.1.1'
 	option netmask '255.255.255.0'
 	option ip6assign '60'
-	option ifname 'eth0.1'
+	option ifname 'eth0.1 ra0 rai0'
 
 config device 'lan_dev'
 	option name 'eth0.1'
 	option macaddr '$MACLAN'
-	option vid 1
 
 config interface 'wan'
 	option ifname 'eth0.2'
 	option proto 'dhcp'
-	option hostname '$IOPHOSTNAME-$MAC'
-	option vendorid '$HARDWAREID-INTENO'
 	option reqopts '66 67 128 224'
 
 config device 'wan_dev'
 	option name 'eth0.2'
 	option macaddr '$MACWAN'
-	option vid 2
 
 config interface 'wan6'
 	option ifname '@wan'

inteno-netmodes/files/etc/netmodes/routed_mtk/wireless

@@ -27,7 +27,6 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option wps_pbc	1
-	option ifname	ra0
 
 config wifi-device  rai0
 	option band a
@@ -46,5 +45,4 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option wps_pbc	1
-	option ifname	rai0
 

inteno-netmodes/files/lib/functions/netmode.sh

@@ -1,430 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-NMTMPDIR=/var/netmodes
-OLD_MODE_FILE=/var/netmodes/old_mode
-SWITCHMODELOCK="/tmp/switching_mode"
-MODEDIR=$(uci -q get netmode.setup.dir)
-MTK=0
-
-opkg list-installed | grep -q kmod-mt.*mtk && MTK=1
-
-[ -n "$MODEDIR" ] || MODEDIR="/etc/netmodes"
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-disable_firewall() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-	/etc/init.d/firewall reload
-}
-
-is_inteno_macaddr()
-{
-	macaddr=$1
-
-	echo $macaddr | grep -i -e "^00:22:07" \
-				-e "^02:22:07" \
-				-e "^44:D4:37" \
-				-e "^00:0C:07" \
-				-e "^02:0C:07" \
-				-e "^06:0C:07" \
-				-e "^00:0C:43" \
-				-e "^02:0C:43" \
-				-e "^06:0C:43" \
-	&& return
-	false
-}
-
-get_wifi_wet_interface() {
-	local ifname=""
-	handle_interface() {
-		[ -n "$ifname" ] && return
-		config_get mode "$1" mode
-		if [ "$mode" == "sta" -o "$mode" == "wet" ]; then
-			config_get ifname "$1" ifname
-		fi
-	}
-	config_load wireless
-	config_foreach handle_interface wifi-iface
-	echo "$ifname"
-}
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
-correct_uplink() {
-	local IFACE="$1"
-	local WANDEV="$(db -q get hw.board.ethernetWanPort)"
-	local WETIF="$(get_wifi_wet_interface)"
-	local link wetcfg wetnet wetmac
-
-	[ $MTK -eq 1 ] || WANDEV="$WANDEV.1"
-
-	[ -n "$IFACE" -a "$IFACE" != "$WANDEV" -a "$IFACE" != "$WETIF" ] && return
-
-	link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-	[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-
-	if [ ! -f /tmp/netmodes/uplink-macaddr-corrected ]; then
-		wetcfg="$(get_wifi_iface_cfgstr $WETIF)"
-		wetnet="$(uci -q get $wetcfg.network)"
-		wetmac="$(ifconfig $WETIF | grep HWaddr | awk '{print$NF}')"
-		if [ -d /sys/class/net/br-$wetnet ]; then
-			ifconfig br-$wetnet hw ether $wetmac
-			#touch -f /tmp/netmodes/uplink-macaddr-corrected
-		fi
-	fi
-
-	if [ "$link" == "up" ]; then
-		ubus call network.device set_state "{\"name\":\"$WETIF\", \"defer\":true}"
-		ubus call network.device set_state "{\"name\":\"$WANDEV\", \"defer\":false}"
-	else
-		ubus call network.device set_state "{\"name\":\"$WETIF\", \"defer\":false}"
-		ubus call network.device set_state "{\"name\":\"$WANDEV\", \"defer\":true}"
-		ubus call led.internet  set '{"state" : "notice"}'
-	fi
-}
-
-switch_netmode() {
-	local newmode="$1"
-
-	[ -f /etc/config/netmode -a -d $MODEDIR ] || return
-
-	[ -n "$newmode" ] && uci -q set netmode.setup.curmode="$newmode"
-
-	local curmode conf old_mode
-
-	# NETMODE CONFIG #
-	config_load netmode
-	config_get curmode setup curmode
-	uci -q set netmode.setup.repeaterready="0"
-
-	# set default JUCI page to overview
-	uci -q set juci.juci.homepage="overview"
-	uci commit juci
-
-	if [ "$curmode" == "repeater" ]; then
-		if [ $MTK -eq 1 ]; then
-			curmode="repeater_mtk_5g_up_dual_down"
-		else
-			curmode="repeater_brcm_2g_up_dual_down"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-	fi
-	if [ "$curmode" == "routed" ]; then
-		if [ $MTK -eq 1 ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-	fi
-	uci commit netmode
-	# end of NETMODE CONFIG #
-
-	old_mode="$(cat $OLD_MODE_FILE 2>/dev/null)"
-
-        # if curmode has not changed do not copy configs
-        if [ "$curmode" == "$old_mode" ]; then
-                /etc/init.d/environment reload
-                return
-        fi
-
-        echo $curmode >$OLD_MODE_FILE
-
-	[ -d "/etc/netmodes/$curmode" ] || return
-	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-	cp /etc/netmodes/$curmode/* /etc/config/
-	rm -f /etc/config/DETAILS
-	sync
-
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-
-	if [ "$reboot" != "0" ]; then
-		reboot &
-		exit
-	fi
-
-	/etc/init.d/environment reload
-	case "$curmode" in
-		repeater*)
-			touch $SWITCHMODELOCK
-			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
-			ubus call leds set  '{"state" : "allflash"}'
-			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
-			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			ubus call network reload
-			wifi reload nodat
-			ubus call router.network reload
-			rm -f /tmp/netmodes/uplink-macaddr-corrected
-			correct_uplink
-			ubus call leds set  '{"state" : "normal"}'
-			rm -f $SWITCHMODELOCK
-		;;
-		*)
-			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			ubus call uci commit '{"config":"network"}'
-		;;
-	esac
-}
-
-wificontrol_takes_over() {
-	local ret
-	[ -f /sbin/wificontrol ] || return
-
-	ubus call leds set  '{"state" : "allflash"}'
-
-	if pidof wificontrol >/dev/null; then
-		ret=0
-		# let netmode-conf up to 20 seconds before switching mode
-		for tm in 2 4 6 8; do
-			if [ -f /tmp/wificontrol.txt ]; then
-				ret=1
-				break
-			fi
-			sleep $tm
-		done
-		# let netmode-conf take over
-		[ $ret -eq 1 ] && return 0
-	fi
-
-	return 1
-}
-
-wait_for_netmode_handler() {
-	for tm in 2 4 6 8; do
-		if [ ! -f $SWITCHMODELOCK ]; then
-			break
-		fi
-		sleep $tm
-	done
-}
-
-netmode_get_ip_type() {
-	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
-		echo "private"
-	} || {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
-		echo "public"
-	}
-}
-
-get_device_of() {
-	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
-	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
-        local cnt=1
-        local idx=0
-
-	local pnum=$(echo $PORT_NAMES | wc -w)
-
-	if [ $pnum -le 2 ]; then
-		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
-	fi
-
-	# get index of interface name
-	for i in $PORT_NAMES; do
-		if [ "$i" == "$1" ]; then
-			idx=$cnt
-		fi
-		cnt=$((cnt+1))
-	done
-
-        # get port name from index
-	cnt=1
-	for i in $PORT_ORDER; do
-		if [ "$cnt" == "$idx" ]; then
-			echo $i
-		fi
-		cnt=$((cnt+1))
-	done
-}
-
-populate_netmodes() {
-	[ -f /etc/config/netmode -a -d $MODEDIR ] || return
-	local curmode
-
-	config_load netmode
-
-	config_get curmode setup curmode
-
-	mkdir -p $NMTMPDIR
-
-	if [ "$curmode" == "routed" ]; then
-		if [ $MTK -eq 1 ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-	fi
-
-	echo $curmode > $OLD_MODE_FILE
-
-	delete_netmode() {
-		uci delete netmode.$1
-	}
-
-	config_foreach delete_netmode netmode
-	uci commit netmode
-
-	wan=$(get_device_of WAN)
-	lan1=$(get_device_of LAN1)
-	lan2=$(get_device_of LAN2)
-	lan3=$(get_device_of LAN3)
-	lan4=$(get_device_of LAN4)
-	lan5=$(get_device_of LAN5)
-
-	for file in $(find $MODEDIR -type f); do
-		conf="$(echo $file | cut -d'/' -f5)"
-		if [ "$conf" == "layer2_interface_ethernet" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		fi
-		if [ "$conf" == "network" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-
-			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
-			uci -q set $file.wan.ifname="$ifname"
-			uci -q commit $file
-		fi
-	done
-
-	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
-	for mode in $(ls $MODEDIR); do
-
-			case "$mode" in
-				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
-				;;
-			esac
-
-			lang=""
-			desc=""
-			exp=""
-			uci -q set netmode.$mode=netmode
-			json_load "$(cat $MODEDIR/$mode/DETAILS)"
-
-			if json_select excluded_boards; then
-				exclude=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							uci -q delete netmode.$mode
-							exclude=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $exclude -eq 1 ] && continue
-			fi
-
-			if json_select acl; then
-				_i=1
-				while json_get_var user $_i; do
-					uci add_list netmode.$mode._access_r="$user"
-					_i=$((_i+1))
-				done
-				json_select ..
-			fi
-
-			json_select description
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var desc $lang
-				uci -q set netmode.$mode."desc_$lang"="$desc"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
-				json_select ..
-			done
-			json_select ..
-
-			json_select explanation
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var exp $lang
-				uci -q set netmode.$mode."exp_$lang"="$exp"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
-				json_select ..
-			done
-			json_select ..
-
-			json_get_var cred credentials
-			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var ulb uplink_band
-			uci -q set netmode.$mode.uplink_band="$ulb"
-			json_get_var reboot reboot
-			uci -q set netmode.$mode.reboot="$reboot"
-	done
-
-	config_get curmode setup curmode
-	[ -d /etc/netmodes/$curmode ] || {
-		[ $MTK -eq 1 ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
-	}
-
-	uci commit netmode
-}
-
-start_netmode_tools() {
-	local curmode repeaterready
-
-	killall -9 wificontrol >/dev/null 2>&1
-	killall -9 netmode-discover >/dev/null 2>&1
-
-	config_load netmode
-	config_get_bool repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && {
-		/sbin/netmode-discover &
-		/sbin/wificontrol --repeater &
-		return
-	}
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			/sbin/netmode-discover &
-			/sbin/wificontrol --repeater &
-		;;
-	esac
-}
-
-stop_netmode_tools() {
-	killall -9 netmode-discover >/dev/null 2>&1
-	killall -9 wificontrol >/dev/null 2>&1
-}
-

inteno-netmodes/files/sbin/netmode-client-detect

@@ -5,10 +5,7 @@
 
 . /usr/share/libubox/jshn.sh
 
-action=
-ipaddr=
-macaddr=
-network=
+local action ipaddr macaddr network
 
 timed_check() {
 	while true; do
@@ -51,7 +48,7 @@ while true ; do
 		json_get_var network network "lan"
 
 		if is_inteno_macaddr $macaddr; then
-			logger -s -p user.info -t $0 "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
+			echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
 			ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
 			/sbin/wificontrol --router --destination $ipaddr
 		fi

inteno-netmodes/files/sbin/netmode-conf

@@ -2,24 +2,11 @@
 
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
-. /lib/functions/netmode.sh
 
 state="exit"
 TMPPATH="/tmp/netmode_config_backup"
 CURMODE=""
 SLEEPTIME=300
-pid_file=/tmp/netmode-conf.pid
-
-echo "$$" >$pid_file
-
-cleanup(){
-	rm -rf $pid_file
-	# we need to trigger a reload of icwmp but ONLY if ip or device has changed
-	[ -f "/etc/hotplug.d/iface/90-icwmp" ] && INTERFACE=wan ACTION=ifup sh /etc/hotplug.d/iface/90-icwmp
-	exit
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGSTOP
 
 set_wireless_values() {
 	local iface_num="$1"
@@ -99,7 +86,6 @@ restore() {
 		uci set juci.juci.homepage='netmode-wizard'
 		uci commit juci
 		cp $TMPPATH/* /etc/config/
-		sync
 		uci set netmode.setup.curmode=$CURMODE
 		uci commit netmode
 		ubus call network reload
@@ -122,18 +108,22 @@ backup() {
 file="$1"
 from_gui="$2"
 
-[ -f "$file" ] || cleanup
+[ -f "$file" ] || exit
 
 # let netmode-handler up to 20 seconds to finish switching mode
-wait_for_netmode_handler
+for tm in 2 4 6 8; do
+	if [ ! -f /tmp/switching_mode ]; then
+		break
+	fi
+	sleep $tm
+done
 
 [ "$from_gui" == "true" ] && backup
 
 json_load "`cat $file`"
 json_select "wifi_ifaces"
 
-curmode=""
-repmode=""
+local curmode repmode
 config_load netmode
 config_get curmode setup curmode
 
@@ -148,20 +138,14 @@ case $curmode in
 	;;
 esac
 
-apcliband="a"
+local apcliband="a"
 case $curmode in
 	*_2g_*) apcliband="b";;
 esac
 
 i=1
 
-dummy=
-band=
-ssid=
-key=
-encryption=
-device=
-iface_num=
+local dummy band ssid key encryption device iface_num
 
 while json_get_var dummy $i; do
 	json_select $i
@@ -173,14 +157,14 @@ done
 
 [ "$apcliband" == "$band" -o "$band" == "" ] || {
 	[ "$from_gui" == "true" ] && restore "back"
-	cleanup
+	exit
 }
 
 repeater_iface_num=$(uci -q show wireless | grep -e ".mode='wet'" -e ".mode='sta'"  | sed 's/.*\[\([0-9]\)\].*/\1/')
 
 [ -z "$repeater_iface_num" ] && {
 	[ "$from_gui" == "true" ] && restore "back"
-	cleanup
+	exit
 }
 
 json_get_var ssid ssid
@@ -193,8 +177,8 @@ json_load "`cat $file`"
 json_select "wifi_ifaces"
 
 config_load wireless
-b_num=0
-a_num=0
+local b_num=0
+local a_num=0
 
 i=1
 while json_get_var dummy $i; do
@@ -209,7 +193,7 @@ while json_get_var dummy $i; do
 		a_num=$((a_num+1))
 		[ -z $iface_num ] && {
 			[ "$from_gui" == "true" ] && restore "back"
-			cleanup
+			exit
 		}
 		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
 		get_device "b" device
@@ -217,7 +201,7 @@ while json_get_var dummy $i; do
                 b_num=$((b_num+1))
                 [ -z $iface_num ] && {
                         [ "$from_gui" == "true" ] && restore "back"
-                        cleanup
+                        exit
                 }
 		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
 	else
@@ -234,7 +218,7 @@ while json_get_var dummy $i; do
 		esac
 		[ -z $iface_num ] && {
 			[ "$from_gui" == "true" ] && restore "back"
-			cleanup
+			exit
 		}
 		set_wireless_values "$iface_num" "$ssid" "$key" "$encryption" "$device"
 	fi
@@ -267,9 +251,8 @@ uci commit wireless
 if [ "$from_gui" == "true" ]; then
 	# check for connectivity
 	wifi reload
-	[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-	correct_uplink
-	i=$SLEEPTIME
+	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
+	i=$SLEEPTIME;
 
 	while [ $i -gt 0 ]; do
 		ip=`route -n | awk '/^0.0.0.0/{print $2}'`
@@ -281,7 +264,7 @@ if [ "$from_gui" == "true" ]; then
 		ping -w1 $ip
 		if [ $? -eq 0 ]; then
 			restore
-			cleanup
+			exit
 		else
 			i=$((i-10))
 			sleep 9
@@ -290,7 +273,7 @@ if [ "$from_gui" == "true" ]; then
 	restore "back"
 else
 	if [ "$state" == "exit" ]; then
-		cleanup
+		return
 	fi
 	ubus call leds set '{"state":"allflash"}'
 	if [ "$state" == "apply" ]; then
@@ -300,9 +283,6 @@ else
 		# wifi reload
 		wifi reload
 	fi
-	[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-	correct_uplink
+	[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
 	ubus call leds set '{"state":"normal"}'
 fi
-
-cleanup

inteno-netmodes/files/sbin/netmode-discover

@@ -1,5 +1,7 @@
 #!/bin/sh
 
+local unlisted mac ipaddr netmask mask
+
 mask_to_cidr() {
     nbits=0
     IFS=.
@@ -21,14 +23,9 @@ mask_to_cidr() {
 }
 
 while true; do
-	[ -e /sys/class/net/br-wan ] || {
-		sleep 5
-		continue
-	}
-
 	unlisted=0
 
-	ps | grep wifi | grep -q reload || {
+	ps | grep -q wifi | grep -q reload || {
 		for mac in $(brctl showmacs br-wan 2>/dev/null | tail -n +2 | grep no | awk '{print$2}'); do
 			grep -q "$mac" /proc/net/arp || unlisted=$((unlisted+1))
 		done
@@ -38,10 +35,10 @@ while true; do
 		mask=$(mask_to_cidr $netmask)
 	}
 
-	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" -a $mask -ge 24 ]; then
+	if [ $unlisted -gt 0 -a -n "$ipaddr" -a -n "$netmask" ]; then
 		fping -c 1 -t 1000 -g $ipaddr/$mask -q >/dev/null 2>&1
 	fi
 
-	sleep 30
+	sleep 20
 done
 

inteno-netmodes/files/sbin/netmode-repeater-correction

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+MTK=0
+[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
+
+if [ $MTK -eq 1 ]; then
+	WANDEV="eth0.2"
+	link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
+else
+	WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
+	link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
+fi
+
+[ "$link" == "up" ] && action=add
+[ "$link" == "down" ] && action=remove
+[ -z "$action" ] && exit
+
+# trigger a fake hotplug net event
+INTERFACE=$WANDEV ACTION=$action /sbin/hotplug-call net

inteno-netmodes/files/sbin/start-netmode-conf

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-netmode-conf "$1" "$2" &

inteno-netmodes/files/sbin/testnet

@@ -1,257 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-NETCON=0
-TVCON=0
-WANIP=0
-LASTSTATUS=""
-CURSTATUS=""
-ETHWAN="$(db -q get hw.board.ethernetWanPort)"
-
-SLEEP_TIME=30
-enableCounter=0
-AccessPolicy=0
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
-ping_uplink()
-{
-	local hasip hasdev hasmode
-	local ipaddr=""
-	local device=""
-	local rready=""
-	local wetif=""
-	local assoclist=""
-	local rv=0
-
-	[ -f /tmp/wps_client_mode_active ] && {
-		ubus call led.internet  set '{"state" : "off"}'
-		return
-	}
-
-	ipaddr="$(ip r | grep default | awk '{print$3}')"
-	[ -n "$ipaddr" ] && hasip=1 || hasip=0
-
-	device="$(ip r | grep default | awk '{print$5}')"
-	[ -n "$device" ] && hasdev=1 || hasdev=0
-		
-	rready="$(uci -q get netmode.setup.repeaterready)"
-	[ "$rready" == "1" ] && hasmode=0 || hasmode=1
-	
-	if [ "$hasmode" == "1" ] && [ "$hasip" == "0" -o "$hasdev" == "0" ]; then
-		rv=0
-	elif [ "$hasmode" == "1" ]; then
-		arping -f -q -c1 -w3 -I $device $ipaddr
-		[ $? -eq 1 ] && rv=0 || rv=1
-	else
-		SLEEP_TIME=5
-		ubus call led.internet  set '{"state" : "off"}'
-		return
-	fi
-
-	if [ $rv -eq 0 ]; then
-		echo "{ \"online\" : false }" > /tmp/internet_connection_status
-
-		SLEEP_TIME=10
-
-		wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-		# If there is an uplink IP address but no connection for 5 minutes, reboot
-		if [ $enableCounter -gt 32 ]; then
-			logger -s -p user.info -t "testnet" "No uplink connection; reboot" >/dev/console
-			ubus call led.internet  set '{"state" : "error"}'
-			reboot &
-		elif [ $((enableCounter % 8)) -eq 0 -a $enableCounter -ge 8 -o $enableCounter -eq 0 ]; then
-			ps | grep -v grep | grep -q 'wifi reload\|wifi import\|wifi.credentials\|iwpriv' && return
-
-			logger -s -p user.info -t "testnet" "No uplink connection; try to re-connect" >/dev/console
-
-			if [ -f /usr/sbin/wlctl ]; then
-				assoclist="$(wlctl -i $wetif assoclist | head -1 | awk '{print$2}')"
-				wlctl -i $wetif reassoc $assoclsit
-			elif [ -f /usr/sbin/iwpriv ]; then
-				wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-				wetssid="$(uci -q get $wetcfg.ssid)"
-				wetkey="$(uci -q get $wetcfg.key)"
-				if [ -n "$wetkey" ]; then
-					wetauth="WPA2PSK"
-					wetenc="AES"
-				else
-					wetauth="OPEN"
-					wetenc="NONE"
-				fi
-				iwpriv $wetif set ApCliEnable=0
-				iwpriv $wetif set ApCliSsid="$wetssid"
-				iwpriv $wetif set ApCliAuthMode="$wetauth"
-				iwpriv $wetif set ApCliEncrypType="$wetenc"
-				iwpriv $wetif set ApCliWPAPSK="$wetkey"
-				iwpriv $wetif set ApCliEnable=1
-				iwpriv $wetif set ApCliAutoConnect=1
-			fi
-			ubus call led.internet  set '{"state" : "notice"}'
-#			touch /tmp/netmodes/repeater_trying_to_connect
-#		else
-#			if [ -f /tmp/netmodes/repeater_trying_to_connect ]; then
-#				rm -f /tmp/netmodes/repeater_trying_to_connect
-#			else
-#				ubus call led.internet  set '{"state" : "error"}'
-#			fi
-		fi
-
-		enableCounter=$((enableCounter+1))
-
-		if [ $AccessPolicy -eq 1 ]; then
-			return
-		fi
-
-		AccessPolicy=1
-		if [ -f /usr/sbin/iwpriv ]; then
-			grep -q up /sys/class/net/$ETHWAN/operstate 2>/dev/null || {
-				logger -s -p user.info -t "testnet" "Disconnect all stations and disable WiFi access on downlink wireless interfaces" >/dev/console
-				# Do not allow clients to connect on 2.4GHz radio
-				iwpriv ra0 set AccessPolicy=$AccessPolicy
-				# Do not allow clients to connect on 5GHz radio
-				iwpriv rai0 set AccessPolicy=$AccessPolicy
-				# Disconnect clients on 2.4GHz radio
-				iwpriv ra0 set DisConnectAllSta=2
-				# Disconnect clients on 5GHz radio
-				iwpriv rai0 set DisConnectAllSta=2
-			}
-		fi
-	else
-		grep -q "true" /tmp/internet_connection_status 2>/dev/null || logger -s -p user.info -t "testnet" "Uplink connection is gained" >/dev/console
-		echo "{ \"online\" : true }" > /tmp/internet_connection_status
-		ubus call led.internet  set '{"state" : "eok"}'
-
-		SLEEP_TIME=5
-
-		enableCounter=0
-		if [ $AccessPolicy -eq 0 ]; then
-			return
-		fi
-		# Uplink working, allow clients to connect
-		AccessPolicy=0
-
-		if [ -f /usr/sbin/iwpriv ]; then
-			logger -s -p user.info -t "testnet" "Enable WiFi access on downlink wireless interfaces" >/dev/console
-			iwpriv ra0 set AccessPolicy=$AccessPolicy
-			iwpriv rai0 set AccessPolicy=$AccessPolicy
-		fi
-	fi
-}
-
-test_connection() {
-	local addr="$1"
-	local defroute="$(ip r | grep default | awk '{print$3}' | head -1)"
-	local def6route="$(ip -f inet6 r | grep default | awk '{print$3}')"
-	local ping6dev="$(ip -f inet6 r | grep default | awk '{print$5}')"
-
-	if [ -n "$addr" ]; then
-		ping -q -w 5 -c 1 $addr >/dev/null 2>&1 && return 0
-	elif [ -n "$defroute" ]; then
-		ping -q -w 5 -c 1 $defroute >/dev/null 2>&1 && return 0
-		for nmsrv in $(grep nameserver /var/resolv.conf.auto | awk '{print$2}'); do
-			ping -q -w 5 -c 1 $nmsrv >/dev/null 2>&1 && return 0
-		done
-	elif [ -n "$def6route" ] && [ -n "$ping6dev" ]; then
-		ndisc6 -w 5 -1 $def6route $ping6dev >/dev/null 2>&1 && return 0
-	fi
-	return 1
-}
-
-wan_have_ip() {
-	[ -d /sys/class/net/$ETHWAN ] || return
-	ubus list led.wan >/dev/null 2>&1 || return
-
-	local addr=$(ip a show dev $ETHWAN | grep "inet "| awk '{print $2}')
-
-	if [ -n "$addr" ]; then
-		WANIP=1
-		ubus call led.wan  set '{"state" : "ok"}'
-	else
-		WANIP=0
-	fi
-	# don't set wan here status is set from hotplug, only set when ip is detected.
-}
-
-internet_test() {
-	local link dest
-
-	dest="$(uci -q get system.@system[0].netping_addr)"
-
-	test_connection $dest
-
-	if [ "$?" -eq 0 ]; then
-		NETCON=1
-		ubus call led.internet  set '{"state" : "ok"}'
-		echo "{ \"online\" : true }" > /tmp/internet_connection_status
-	else
-		NETCON=0
-		ubus call led.internet  set '{"state" : "error"}'
-		echo "{ \"online\" : false }" > /tmp/internet_connection_status
-	fi
-}
-
-iptvtest() {
-	ubus list led.ext >/dev/null 2>&1 && TVCON=1 || return
-
-	local dest="$(uci -q get system.@system[0].tvping_addr)"
-
-	test_connection $dest
-
-	if [ "$?" -eq 0 ]; then
-		TVCON=1
-		[ -n "$dest" ] && ubus call led.ext  set '{"state" : "ok"}'
-	else
-		TVCON=0
-		[ -n "$dest" ] && ubus call led.ext  set '{"state" : "off"}'
-	fi
-}
-
-netmode_check() {
-	local curmode="$(uci -q get netmode.setup.curmode)"
-	local uplinkband="$(uci -q get netmode.$curmode.uplink_band)"
-	local rready="$(uci -q get netmode.setup.repeaterready)"
-
-	[ "$rready" == "1" ] && uplinkband="a"
-
-	echo "$uplinkband"
-}
-
-connectivity_test() {
-	if [ "$(netmode_check)" != "" ]; then
-		ping_uplink
-		return
-	fi
-
-	SLEEP_TIME=30
-
-	internet_test
-
-	if [ $NETCON -eq 1 ]; then
-		CURSTATUS=1
-		[ "$CURSTATUS" == "$LASTSTATUS" ] || ubus send internet '{"status" : "online"}'
-		LASTSTATUS=1
-	else
-		CURSTATUS=0
-		[ "$CURSTATUS" == "$LASTSTATUS" ] || ubus send internet '{"status" : "offline"}'
-		LASTSTATUS=0
-	fi
-}
-
-if [ "$1" == "once" ]; then
-	connectivity_test
-	exit 0
-fi
-
-while true; do
-	connectivity_test
-	sleep $SLEEP_TIME
-done

inteno-netmodes/files/usr/libexec/rpcd/repeater

@@ -129,12 +129,12 @@ case "$1" in
 				json_load "`cat $file`" || write_error "invalid file content"
 				json_select "wifi_ifaces" || write_error "invalid file content"
 
-				start-netmode-conf "$file" "$from_gui" >/dev/null 2>/dev/null
 
 				json_init
 				json_add_string "status" success
 				json_dump
 
+				netmode-conf "$file" "$from_gui" >/dev/null 2>&1 &
 			;;
 		esac
 	;;

iop-lla-libs/Config.in

@@ -1,7 +0,0 @@
-menu "Library options"
-
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debug support"
-	default n
-
-endmenu

iop-lla-libs/Makefile

@@ -1,131 +0,0 @@
-#
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=iop-lla-libs
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cf38a6165251709c0d60b33eafd7f32dcc0675d7
-PKG_SOURCE_URL:=http://public.inteno.se:/iop-lla-libs
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iop-lla-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  SUBMENU:=IOPSYS low level libraries
-  DEPENDS:=+libopenssl
-endef
-
-define Package/libwifi
-  $(call Package/iop-lla-libs)
-  TITLE:= WiFi library (libwifi)
-endef
-
-define Package/libdsl
-  $(call Package/iop-lla-libs)
-  TITLE:= XDSL library (libdsl)
-endef
-
-define Package/libethernet
-  $(call Package/iop-lla-libs)
-  TITLE:= Ethernet library (libethernet)
-DEPENDS:=+TARGET_iopsys_ramips:swconfig
-endef
-
-define Package/iop-lla-libs/config
-  source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
-  TARGET_PLATFORM=LANTIQ
-  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
-else
-  $(info (UNEXPECTED CONFIG TARGET))
-endif
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-define Build/InstallDev/libwifi
-	echo "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX $(1)"
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))

iop/configs/config

@@ -32,8 +32,6 @@ CONFIG_PACKAGE_ice-client-netrounds=m
 CONFIG_PACKAGE_ice-client-rshell=m
 CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_imonitor=y
-CONFIG_PACKAGE_inbd=y
 CONFIG_PACKAGE_inteno-netmodes=y
 CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
@@ -44,34 +42,35 @@ CONFIG_PACKAGE_iptables-mod-ipopt=y
 CONFIG_PACKAGE_iup=y
 CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
+CONFIG_PACKAGE_juci-broadcom-dsl=y
+CONFIG_PACKAGE_juci-broadcom-ethernet=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-broadcom-vlan=y
 CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-broadcom-xdsl=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
+CONFIG_PACKAGE_juci-ethernet=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
 CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-inteno-backup=y
 CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-iup=y
-# CONFIG_PACKAGE_juci-qos is not set
-CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-inteno-provisioning=y
+CONFIG_PACKAGE_juci-inteno-qos=y
+CONFIG_PACKAGE_juci-inteno-voice-client=y
 CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
 CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
-CONFIG_PACKAGE_juci-network-device=y
-CONFIG_PACKAGE_juci-network-dsl=y
 CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-network-port=y
-CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
 CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
@@ -87,6 +86,7 @@ CONFIG_PACKAGE_juci-utils=y
 # CONFIG_PACKAGE_kmod-ipt-nathelper is not set
 CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
+CONFIG_PACKAGE_layer2interface=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
@@ -104,34 +104,29 @@ CONFIG_PACKAGE_mtd-utils-imagewrite=y
 CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
 CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
 CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
-# CONFIG_PACKAGE_p910nd is not set
+CONFIG_PACKAGE_p910nd=y
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
 CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_qos-scripts=y
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rdisc6=y
 CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_samba3=y
 CONFIG_PACKAGE_samba3-nmbd=y
 CONFIG_PACKAGE_snmpd=y
@@ -157,7 +152,6 @@ CONFIG_TARGET_ROOTFS_TARGZ=y
 CONFIG_USE_STRIP=y
 CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
-CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
 CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
@@ -165,9 +159,9 @@ CONFIG_BUSYBOX_CONFIG_DELUSER=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 CONFIG_BUSYBOX_CONFIG_HTTPD=y
-# CONFIG_BUSYBOX_CONFIG_INSMOD is not set
-# CONFIG_BUSYBOX_CONFIG_MODINFO is not set
-# CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
+CONFIG_BUSYBOX_CONFIG_INSMOD=y
+CONFIG_BUSYBOX_CONFIG_MODINFO=y
+CONFIG_BUSYBOX_CONFIG_MODPROBE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
@@ -176,11 +170,11 @@ CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
-# CONFIG_BUSYBOX_CONFIG_LSMOD is not set
+CONFIG_BUSYBOX_CONFIG_LSMOD=y
 CONFIG_BUSYBOX_CONFIG_LSPCI=y
 CONFIG_BUSYBOX_CONFIG_LSUSB=y
 CONFIG_BUSYBOX_CONFIG_MICROCOM=y
-# CONFIG_BUSYBOX_CONFIG_RMMOD is not set
+CONFIG_BUSYBOX_CONFIG_RMMOD=y
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
@@ -210,11 +204,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
-# CONFIG_BUSYBOX_CONFIG_NTPD is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
 # CONFIG_SIGNED_PACKAGES is not set

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -1,15 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -1,7 +0,0 @@
-CONFIG_BCM_I2C=y
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y
-

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -1,5 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -1,16 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_natalie-dect is not set
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -1,3 +0,0 @@
-CONFIG_BCM_I2C=y
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -1,2 +0,0 @@
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-