swmodd: Run lxc as du

Setting '/proc/sys/net/ipv4/igmp_max_memberships' is not enough.
We must pass the max_groups parameter to the mcproxy to prevent MFC
entries from being added to mr_table and packet forwarding for extra
groups.

We also need to increase max_groups, since mcproxy always subscribe
two service groups - ALL-ROUTERS (224.0.0.2) and
ALL-IGMPv3-MC-ROUTERS (224.0.0.22).

bbfdm/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bbfdm
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.20
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=4d922c12c4ad93c21ebab1b5beb263440ad26d85
+PKG_SOURCE_VERSION:=4a8d286201efdff814f106e92147c697c32a94a9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -111,6 +111,7 @@ endif
 
 CMAKE_OPTIONS += \
 	-DBBF_TR181=ON
+	-DBBF_WIFI_DATAELEMENTS=ON
 
 ifeq ($(CONFIG_BBF_TR104),y)
 CMAKE_OPTIONS += \
@@ -165,7 +166,6 @@ CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
 endif
 
 ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += -DBBFDMD_ENABLED=ON
 CMAKE_OPTIONS += \
 	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
 endif
@@ -204,11 +204,15 @@ endef
 
 define Package/bbfdmd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
+	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
 	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/src/bbfdmd $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/json/input.json $(1)/etc/bbfdm/
 endef
 
 define Package/userinterface/install

bbfdm/files/etc/config/bbfdm

@@ -1,5 +1,7 @@
 
 config bbfdmd 'bbfdmd'
+	option enabled '1'
 	option loglevel '1'
 	option refresh_time '10'
 	option transaction_timeout '10'
+

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+[ "$ACTION" = "ifup" ] || exit 0
+
+apply_sysctl_configuration() {
+        local sysctl_conf
+
+        sysctl_conf="/etc/bbfdm/sysctl.conf"
+
+        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
+
+        sysctl -e -p "${sysctl_conf}" >&-
+}
+
+
+ubus -t 10 wait_for network.device
+apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -6,6 +6,8 @@ STOP=10
 USE_PROCD=1
 PROG=/usr/sbin/bbfdmd
 
+BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
+
 log() {
 	echo "${@}"|logger -t bbfdmd.init -p info
 }
@@ -17,12 +19,14 @@ validate_bbfdm_bbfdmd_section()
 		'debug:bool:false' \
 		'loglevel:uinteger' \
 		'sock:string' \
-		'transaction_timeout:string'
+		'refresh_time:uinteger' \
+		'transaction_timeout:uinteger' \
+		'subprocess_level:uinteger'
 }
 
 configure_bbfdmd()
 {
-	local enabled debug sock transaction_timeout
+	local enabled debug sock
 
 	config_load bbfdm
 
@@ -33,6 +37,24 @@ configure_bbfdmd()
 
 	[ "${enabled}" -eq 0 ] && return 0
 
+	[ ! -f "${BBFDM_JSON_INPUT}" ] && return 0
+
+	if [ -n "${loglevel}" ]; then
+		echo "$(jq --arg res ${loglevel} '.daemon.config += {"loglevel": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${refresh_time}" ]; then
+		echo "$(jq --arg res ${refresh_time} '.daemon.config += {"refresh_time": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${transaction_timeout}" ]; then
+		echo "$(jq --arg res ${transaction_timeout} '.daemon.config += {"transaction_timeout": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${subprocess_level}" ]; then
+		echo "$(jq --arg res ${subprocess_level} '.daemon.config += {"subprocess_level": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
 	procd_set_param command ${PROG}
 	if [ "${debug}" -eq 1 ]; then
 		procd_set_param stdout 1
@@ -42,42 +64,17 @@ configure_bbfdmd()
 	if [ -f "${sock}" ]; then
 		procd_append_param command -s "${sock}"
 	fi
-
-	if [ -n "${transaction_timeout}" ]; then
-		procd_append_param command -t "${transaction_timeout}"
-	fi
 }
 
-apply_sysctl_configuration() {
-	local sysctl_conf
-
-	sysctl_conf="/etc/bbfdm/sysctl.conf"
-	
-	[ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-	sysctl -e -p "${sysctl_conf}" >&-
-}
-
-start_service() {
-	local sysctl_reload
-
-	ubus -t 5 wait_for network.device
-	[ "$?" -eq 0 ] && sysctl_reload=1
-
-	procd_open_instance bbf
+start_service()
+{
+	procd_open_instance "bbfdm"
 	configure_bbfdmd
 	procd_set_param respawn
-	procd_close_instance
-
-	[ "${sysctl_reload}" -eq 1 ] && apply_sysctl_configuration
-}
-
-reload_service() {
-	ubus -t 5 wait_for network.device
-	apply_sysctl_configuration
+	procd_close_instance "bbfdm"
 }
 
 service_triggers()
 {
-	procd_add_reload_trigger "bbfdm" "network"
+	procd_add_reload_trigger "bbfdm"
 }

decollector/Makefile

@@ -5,17 +5,19 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=decollector
-PKG_VERSION:=4.0.2.0
+PKG_VERSION:=4.0.2.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=162654487bfbff7d68d0c87ae9498a3def738d84
+PKG_SOURCE_VERSION:=fa1b24690ca00a73401fec1386dbf98932545d05
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.7
+PKG_VERSION:=3.5.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=83f89a83cf860bbcf2b7f2e030215db315a5bbbf
+PKG_SOURCE_VERSION:=ae9e8f3406f1087464b994cdfbc64a4ce2f86ed4
 PKG_MIRROR_HASH:=skip
 endif
 

dectmngr/files/etc/init.d/dectmngr

@@ -6,7 +6,6 @@ START=70
 STOP=12
 
 USE_PROCD=1
-NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
@@ -16,11 +15,13 @@ DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
+	dect_pid=$(pidof $PROG)
+	[ -n "$dect_pid" ] && kill $dect_pid
 
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME
+	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
+	while pidof $PROG > /dev/null 2>&1; do
+		dect_pid=$(pidof $PROG)
+		[ -n "$dect_pid" ] && kill -9 $dect_pid
 		sleep 1
 	done
 }

dslmngr/Makefile

@@ -13,7 +13,7 @@ PKG_VERSION:=1.2.0
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_VERSION:=43dec92b1c86be7859521da337e7bd1168848b26
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

ethmngr/Makefile

@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_iopsys_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,7 +37,7 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
 define Build/Compile
 endef
 endif
@@ -49,7 +49,7 @@ ifneq ($(CONFIG_TARGET_brcmbca),)
 else
 	$(CP) ./files/linux/* $(1)/
 endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
 endif

evoice/Makefile

@@ -1,106 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,334 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,181 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,56 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

gryphon-led-module/Makefile

@@ -41,32 +41,8 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
+# support compilation against BCM SDK kernel
+include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
 
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.3.1
+PKG_VERSION:=9.3.5
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=9db8e0f900c823a41274277a2673efa3fc17a123
+PKG_SOURCE_VERSION:=caa4ac86b91b698e73e09a3ba8b60add36ea4b62
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 

icwmp/files/etc/config/cwmp

@@ -15,7 +15,6 @@ config acs 'acs'
 config cpe 'cpe'
 	option enable '1'
 	option default_wan_interface 'wan'
-	option default_wan6_interface 'wan6'
 	option default_lan_interface 'lan'
 	option log_to_console 'disable'
 	option log_to_file 'disable'

icwmp/files/etc/firewall.cwmp

@@ -5,14 +5,14 @@ log() {
 	echo "${@}"|logger -t firewall.cwmp -p info
 }
 
-if [ ! -f "/var/state/cwmp" ]; then
+if [ ! -f "/var/state/icwmp" ]; then
 	exit 0;
 fi
 
-zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
+zone_name=$(uci -c /var/state -q get icwmp.acs.zonename)
 port=$(uci -q get cwmp.cpe.port)
-ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+ipaddr=$(uci -c /var/state -q get icwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get icwmp.acs.ip6)
 incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
 
 if [ -z "${zone_name}" ]; then
@@ -76,5 +76,5 @@ if [ "$?" -eq 0 ]; then
 	${cmd6}
 fi
 
-uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit cwmp
+uci -c /var/state -q set icwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit icwmp

icwmp/files/etc/icwmpd/update.sh

@@ -17,8 +17,8 @@ handle_icwmp_update() {
 	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
 
 	if [ "$ret" = "true" ]; then
-		# read status from var/state/cwmp
-		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
+		# read status from var/state/icwmp
+		status=$(uci -q -c /var/state get icwmp.sess_status.current_status)
 		if [ "$status" != "running" ]; then
 			log "Trigger out of bound inform, since last inform status was failure"
 			ubus -t 10 call tr069 inform >/dev/null 2>&1

icwmp/files/etc/init.d/icwmpd

@@ -329,7 +329,6 @@ validate_cpe_section()
 	uci_validate_section cwmp cpe "cpe" \
 		'interface:string' \
 		'default_wan_interface:string' \
-		'default_wan6_interface:string' \
 		'log_to_console:or("enable","disable")' \
 		'log_to_file:or("enable","disable")' \
 		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \

ieee1905/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.0.15
+PKG_VERSION:=8.1.11
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1717f97c054c232d393c91fa7e95a571bf893680
+PKG_SOURCE_VERSION:=90b8f44ca78b4711d5c86234fb0fc621ebd97fd9
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

iop/config

@@ -67,9 +67,10 @@ CONFIG_PACKAGE_map-controller=m
 CONFIG_PACKAGE_map-topology=y
 CONFIG_PACKAGE_decollector=y
 
+CONFIG_IEEE1905_CMDU_SA_IS_ALMAC=y
+
 # Network #
 CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_owsd=m
 CONFIG_PACKAGE_urlfilter=y
 
 # System #

iop/scripts/feeds_update.sh

@@ -1,15 +1,26 @@
-#! /bin/bash
+#!/bin/bash
 
 function feeds_update {
-
+	heads=1
 	developer=0
 	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
+	while getopts "inh" opt; do
 		case $opt in
+		i)
+			heads=0
+			;;
 		n)
 			override=0
 			;;
+		h|\?)
+			echo "Usage: ./iop feeds_update [-i] [-n] [-h]"
+			echo
+			echo "OPTIONS:"
+			echo "  -i - Only update index. Do not change HEAD in feeds."
+			echo "  -n - Do not replace core packages with iopsys versions."
+			echo "  -h - Display this help message and exit."
+			exit 1
+			;;
 		esac
 	done
 
@@ -17,42 +28,42 @@ function feeds_update {
 
 	cp .config .genconfig_config_bak
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
+	if [ $heads == 1 ]; then
+		if [ $developer == 1 ]; then
+			./scripts/feeds update -g
+		else
+			./scripts/feeds update
+		fi
 	fi
-	./scripts/feeds update -ai
+	./scripts/feeds update -ai || exit 1
 
 	# replace core packages with iopsys versions
 	if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
+		./scripts/feeds install -f -p openwrt_core -a || exit 1
 	fi
 
 	(
 		echo '# DO NOT EDIT. Autogenerated file by ./iop feeds_update'
 		echo 'FEED_DEVICES_DIRS:='
 		find feeds -type f -name .is-feed-devices-dir -printf 'FEED_DEVICES_DIRS+=$(TOPDIR)/%h'
-	) > target/linux/feed-devices/feed-devices-list.mk
+	) > target/linux/feed-devices/feed-devices-list.mk || exit 1
 
 	# targets need to be installed explicitly
 	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
+		./scripts/feeds install -f -p targets $target || exit 1
 	done
 
 	# install all packages
-	./scripts/feeds install -a
+	./scripts/feeds install -a || exit 1
 
 	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+	find -L package/feeds -maxdepth 2 -type l -delete || exit 1
 
 	cp .genconfig_config_bak .config
-	make defconfig
+	make defconfig || exit 1
 
 	# record when we last run this script
-	touch tmp/.iop_bootstrap
+	touch tmp/.iop_bootstrap || exit 1
 
 	# always return true
 	exit 0

iop/scripts/genconfig.sh

@@ -15,10 +15,11 @@ function genconfig {
 	target_config_path=""
 	brcmbca_feed="target/linux/feeds/brcmbca"
 	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
+	x86_feed="target/linux/feeds/x86"
+	armvirt_feed="target/linux/feeds/armvirt"
+	mediatek_feed="target/linux/feeds/mediatek"
 	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -41,19 +42,13 @@ function genconfig {
 	}
 
 	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
+	    while read -r line
 	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -74,8 +69,7 @@ function genconfig {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-		num=$((num+1))
-	    done
+	    done < .genconfig.config
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -113,32 +107,27 @@ function genconfig {
 		[ -e $airoha_feed/genconfig ] &&
 			airoha=$(cd $airoha_feed; ./genconfig)
 		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
+			x86=$(cd $x86_feed; ./genconfig)
 		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
+			armvirt=$(cd $armvirt_feed; ./genconfig)
 		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
+			mediatek=$(cd $mediatek_feed; ./genconfig)
 		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
 			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
+			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in brcmbca airoha x86 armvirt mediatek ipq95xx ipq53xx; do
 				echo "$list based boards:"
-				for b in ${!list}; do
+				a=$(echo "${!list}" | sort)
+				for b in $a; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
-		    return
-		fi
-	    done
-
 	    for p in $airoha; do
 		if [ $p == $profile ]; then
 		    target="airoha"
@@ -147,25 +136,25 @@ function genconfig {
 		fi
 	    done
 
-	    for p in $iopsys_x86; do
+	    for p in $x86; do
 		if [ $p == $profile ]; then
-		    target="iopsys_x86"
+		    target="x86"
 			target_config_path="$x86_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_armvirt; do
+	    for p in $armvirt; do
 		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
+		    target="armvirt"
 			target_config_path="$armvirt_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_mediatek; do
+	    for p in $mediatek; do
 		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
+		    target="mediatek"
 			target_config_path="$mediatek_feed/config"
 		    return
 		fi
@@ -178,6 +167,22 @@ function genconfig {
 		    return
 		fi
 	    done
+
+	    for p in $ipq53xx; do
+		if [ $p == $profile ]; then
+		    target="ipq53xx"
+			target_config_path="$qualcomm_ipq53xx_feed/config"
+		    return
+		fi
+	    done
+
+	    for p in $brcmbca; do
+		if [ $p == $profile ]; then
+		    target="brcmbca"
+			target_config_path="$brcmbca_feed/config"
+		    return
+		fi
+	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -357,10 +362,15 @@ function genconfig {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
-
+		# hack to support custom-devices until we have deprecated this genconfig-script...
+		if [ -f "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" ]; then
+			cat "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" >> .config
+			echo "" >> .config
+		fi
+		
 		# Special handling for targets which use TARGET_DEVICES
 		case "$target" in
-		airoha | iopsys_mediatek | brcmbca | ipq95xx)
+		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
 			# This assumes the device name to be unique within one target,
 			# which is a fair assumption to make.
 			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
@@ -460,7 +470,7 @@ function genconfig {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 0
+		exit 1
 	fi
 
 	if [ $# -eq 0 ]; then
@@ -497,7 +507,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$@" || exit 1
 	fi
 }
 

iop/scripts/genconfig_min.sh

@@ -14,10 +14,11 @@ function genconfig_min {
 	target_config_path=""
 	brcmbca_feed="target/linux/feeds/brcmbca"
 	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
+	x86_feed="target/linux/feeds/x86"
+	armvirt_feed="target/linux/feeds/armvirt"
+	mediatek_feed="target/linux/feeds/mediatek"
 	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -40,19 +41,13 @@ function genconfig_min {
 	}
 
 	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
+	    while read -r line
 	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -73,8 +68,7 @@ function genconfig_min {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-		num=$((num+1))
-	    done
+	    done < .genconfig.config
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -112,32 +106,27 @@ function genconfig_min {
 		[ -e $airoha_feed/genconfig ] &&
 			airoha=$(cd $airoha_feed; ./genconfig)
 		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
+			x86=$(cd $x86_feed; ./genconfig)
 		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
+			armvirt=$(cd $armvirt_feed; ./genconfig)
 		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
+			mediatek=$(cd $mediatek_feed; ./genconfig)
 		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
 			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
+			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in brcmbca airoha x86 armvirt mediatek ipq95xx ipq53xx; do
 				echo "$list based boards:"
-				for b in ${!list}; do
+				a=$(echo "${!list}" | sort)
+				for b in $a; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
-		    return
-		fi
-	    done
-
 	    for p in $airoha; do
 		if [ $p == $profile ]; then
 		    target="airoha"
@@ -146,25 +135,25 @@ function genconfig_min {
 		fi
 	    done
 
-	    for p in $iopsys_x86; do
+	    for p in $x86; do
 		if [ $p == $profile ]; then
-		    target="iopsys_x86"
+		    target="x86"
 			target_config_path="$x86_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_armvirt; do
+	    for p in $armvirt; do
 		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
+		    target="armvirt"
 			target_config_path="$armvirt_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_mediatek; do
+	    for p in $mediatek; do
 		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
+		    target="mediatek"
 			target_config_path="$mediatek_feed/config"
 		    return
 		fi
@@ -177,6 +166,22 @@ function genconfig_min {
 		    return
 		fi
 	    done
+
+	    for p in $ipq53xx; do
+		if [ $p == $profile ]; then
+		    target="ipq53xx"
+			target_config_path="$qualcomm_ipq53xx_feed/config"
+		    return
+		fi
+	    done
+
+	    for p in $brcmbca; do
+		if [ $p == $profile ]; then
+		    target="brcmbca"
+			target_config_path="$brcmbca_feed/config"
+		    return
+		fi
+	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -331,10 +336,15 @@ function genconfig_min {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
+		# hack to support custom-devices until we have deprecated this genconfig-script...
+		if [ -f "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" ]; then
+			cat "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" >> .config
+			echo "" >> .config
+		fi
 
 		# Special handling for targets which use TARGET_DEVICES
 		case "$target" in
-		airoha | iopsys_mediatek | brcmbca | ipq95xx)
+		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
 			# This assumes the device name to be unique within one target,
 			# which is a fair assumption to make.
 			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
@@ -428,7 +438,7 @@ function genconfig_min {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 0
+		exit 1
 	fi
 
 	if [ $# -eq 0 ]; then

iop/scripts/update_package.sh

@@ -449,7 +449,7 @@ insert_feed_hash_in_feeds_config()
     local feed=$1
     local TO=$(cd feeds/${feed}; git rev-parse HEAD)
 
-    sed -i feeds.conf -e "/ ${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    sed -i feeds.conf -e "/ ${feed} / s/\(.*\)[;^].*/\1^${TO}/"
     git add feeds.conf
 }
 

libdsl/Makefile

@@ -10,9 +10,8 @@ PKG_VERSION:=7.2.99
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=54d53295b5e4ca74884045d0fa6bb0dc279ace3d
+PKG_SOURCE_VERSION:=f9f3fcd0f4140540db5bd41059bcca7ded083024
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libdsl.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -29,10 +28,10 @@ ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+else ifeq ($(CONFIG_TARGET_x86),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+else ifeq ($(CONFIG_TARGET_armvirt),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 endif

libeasy/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libeasy
-PKG_VERSION:=7.2.99
+PKG_VERSION:=7.2.100
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bca982ba1e3c59fc900d297145b731dd0ad588a0
+PKG_SOURCE_VERSION:=32db1b79bd88eba85a3e7518dbbbd1e29f4b06d9
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libeasy.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

libethernet/Makefile

@@ -5,14 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libethernet
-PKG_VERSION:=7.2.102
+PKG_VERSION:=7.2.104
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=30df74671870acef99036217e002d1f4418c8d4f
+PKG_SOURCE_VERSION:=d777636ca43302a95e571ab030ec44ef50905570
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libethernet.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -20,7 +19,6 @@ endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
 PKG_LICENSE_FILES:=LICENSE
-PKG_BUILD_DEPENDS:=+TARGET_brcmbca:bcmkernel
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -31,21 +29,18 @@ ifeq ($(CONFIG_TARGET_brcmbca),y)
 	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+else ifeq ($(CONFIG_TARGET_x86),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+else ifeq ($(CONFIG_TARGET_armvirt),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_airoha),y)
   TARGET_PLATFORM=ECONET
   TARGET_CFLAGS +=-DIOPSYS_ECONET
-else ifeq ($(CONFIG_TARGET_ipq95xx),y)
-  TARGET_PLATFORM=IPQ95XX
-  TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-  TARGET_PLATFORM=LINUX
-  TARGET_CFLAGS +=-DIOPSYS_LINUX
+else ifeq ($(CONFIG_TARGET_mediatek),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else
   $(info Unexpected CONFIG_TARGET, use default LINUX)
   TARGET_PLATFORM=LINUX
@@ -70,7 +65,7 @@ define Package/libethernet
   SUBMENU:=IOPSYS HAL libs
   MENU:=1
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api +TARGET_brcmbca:bcmkernel
 endef
 
 define Package/libethernet/description

libqos/Makefile

@@ -5,14 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libqos
-PKG_VERSION:=7.2.100
+PKG_VERSION:=7.2.101
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3a37af002fee1c0d35da49cefee2d24ee92a5d0a
+PKG_SOURCE_VERSION:=93ca0a66d6f82bca208bbe52b75ed582b20aa094
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libqos.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -20,7 +19,6 @@ endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
 PKG_LICENSE_FILES:=LICENSE
-PKG_BUILD_DEPENDS:=+TARGET_brcmbca:bcmkernel
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -30,10 +28,10 @@ ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+else ifeq ($(CONFIG_TARGET_x86),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+else ifeq ($(CONFIG_TARGET_armvirt),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_airoha),y)
@@ -42,7 +40,7 @@ else ifeq ($(CONFIG_TARGET_airoha),y)
 else ifeq ($(CONFIG_TARGET_ipq95xx),y)
   TARGET_PLATFORM=IPQ95XX
   TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
+else ifeq ($(CONFIG_TARGET_mediatek),y)
   TARGET_PLATFORM=LINUX
   TARGET_CFLAGS +=-DIOPSYS_LINUX
 else
@@ -69,7 +67,7 @@ define Package/libqos
   SUBMENU:=IOPSYS HAL libs
   MENU:=1
   TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_brcmbca:bcmkernel
 endef
 
 define Package/libqos/config

libvoice-airoha/Makefile

@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-airoha
 PKG_RELEASE:=1
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.3
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -17,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=2a6ef141747ad0f7b32a536b5b5bd174834a7af5
+PKG_SOURCE_VERSION:=3043d53818166ce02644d53f99b5830d228f78dd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

libvoice-broadcom/Makefile

@@ -17,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=401a392a72e2933f527eb92466faaf2907c38730
+PKG_SOURCE_VERSION:=dc227982c48ee6d722f3fe18dc9db71495ce9758
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

libvoice-d2/Makefile

@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-d2
 PKG_RELEASE:=1
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.4
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -17,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=7ca102e62fa439a7188f2c5e4c72e3fcfd3fb28a
+PKG_SOURCE_VERSION:=f2134d372b3f5e5810e18f34d64d5486d17fca64
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

libwifi/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libwifi
-PKG_VERSION:=7.2.100
+PKG_VERSION:=7.2.104
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d6e14d7a0b747ca09d3f6843cea9ae3584d18dd3
+PKG_SOURCE_VERSION:=a246bf9fd92a1a8c107ffff3eb3428a4174a67df
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libwifi.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -30,11 +30,11 @@ ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+else ifeq ($(CONFIG_TARGET_x86),y)
   TARGET_PLATFORM=TEST
   TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+else ifeq ($(CONFIG_TARGET_armvirt),y)
   TARGET_PLATFORM=TEST
   TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
@@ -44,9 +44,9 @@ else ifeq ($(CONFIG_TARGET_airoha),y)
   TARGET_CFLAGS +=-DIOPSYS_ECONET
 else ifeq ($(CONFIG_TARGET_ipq95xx),y)
   TARGET_PLATFORM=IPQ95XX
-  TARGET_WIFI_TYPE=MAC80211
+  TARGET_WIFI_TYPE=QUALCOMM MAC80211
   TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
+else ifeq ($(CONFIG_TARGET_mediatek),y)
   TARGET_PLATFORM=LINUX
   TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_LINUX

map-agent/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=4.3.1.1
+PKG_VERSION:=4.3.3.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=a6c5d7cbbc6363e123cfacc9333e5ae507f6dcd7
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE_VERSION:=6b1347b33333f3ef9884de0745aa862a0a1dabc8
+PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
@@ -28,7 +28,7 @@ define Package/map-agent
   CATEGORY:=Utilities
   TITLE:=WiFi multi-AP Agent (EasyMesh R2)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +map-plugin +ip-bridge
+	   +map-plugin +ip-bridge +@BUSYBOX_CONFIG_PATCH +@BUSYBOX_CONFIG_DIFF
 endef
 
 

map-agent/files/etc/init.d/mapagent

@@ -175,6 +175,7 @@ validate_agent_config() {
 
 create_dir() {
         mkdir -p /var/run/multiap
+        mkdir -p /etc/multiap
 }
 
 start_service() {

map-controller/Makefile

@@ -1,13 +1,14 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=4.3.0.3
+PKG_VERSION:=4.3.0.6
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=fb600940ac54456bcde650ccee7055f7c9bb785b
+PKG_SOURCE_VERSION:=cadbccc7654a40f16f96f2c48e584b998c03620e
+PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)

map-controller/files/etc/init.d/mapcontroller

@@ -70,7 +70,6 @@ validate_ap_section() {
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes",
 				"none", "psk-mixed", "psk-mixed+aes",
-				"wpa", "wpa+aes", "wpa2", "wpa2+aes",
 				"psk", "psk+aes")' \
 			'key:string' \
 			'vid:range(1,65535):1' \

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.19
+PKG_VERSION:=2.5.1.21
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=7b2f5dc086207dd74c5c56421dea65b7dabb6944
+PKG_SOURCE_VERSION:=693b79873af0017bd53ec001af7f3997565420e8
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz

mcastmngr/files/common/etc/hotplug.d/iface/mcast.hotplug

@@ -20,7 +20,12 @@ compare_mcast_proxy_upstream() {
 
 	for dev in $upstream; do
 		if [ "$l3device" == "$dev" ]; then
-			ubus call uci commit '{"config":"mcast"}'
+			running=$(ubus call service list '{"name": "mcast"}' | jsonfilter -e '@.mcast.instances')
+			if [ -z "${running}" ];then
+				/etc/init.d/mcast start
+			else
+				ubus call uci commit '{"config":"mcast"}'
+			fi
 			exit
 		fi
 	done

mcastmngr/files/common/etc/uci-defaults/61-mcast_config_generate

@@ -95,8 +95,13 @@ interfaces_ok(){
 		dev_section=$(ubus call uci get '{"config":"network", "type":"device", "match":{"name":"'"$itf"'"}}' | jsonfilter -e @.values | jq keys[])
 
 		# mcast config is outdated, simply generate as per new logic
-		[ -z "$dev_section" ] && return 1
+		if [ -z "$dev_section" ]; then
+		       # check if the itf is a native interface	&& return 1
+			native=$(ubus call uci get '{"config":"ports", "type":"ethport", "match":{"ifname":"'"$itf"'"}}' | jsonfilter -e @.values | jq keys[])
+			[ -z "native" ] && return 1
+		fi
 	done
+	return 0
 }
 
 

mcastmngr/files/linux/lib/mcast/linux.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 . /lib/mcast/common.sh
+. /lib/functions/network.sh
 
 include /lib/network
 
@@ -41,22 +42,45 @@ config_mcproxy_interfaces() {
 		return
 	fi
 
-	for upstream in $upstreams; do
+	for excp in $exceptions; do
 		local filter=""
-		for excp in $exceptions; do
-			case $excp in
-			*/*)
-				ip_start="$(ipcalc.sh $excp | grep IP | awk '{print substr($0,4)}')"
-				ip_end="$(ipcalc.sh $excp | grep BROADCAST | awk '{print substr($0,11)}')"
-				filter="$filter ($ip_start - $ip_end | *)"
-				;;
-			*)
-				filter="$filter ($excp | *)"
-				;;
-			esac
+
+		case $excp in
+		*/*)
+			ip_start="$(ipcalc.sh $excp | grep IP | awk '{print substr($0,4)}')"
+			ip_end="$(ipcalc.sh $excp | grep BROADCAST | awk '{print substr($0,11)}')"
+			filter="$filter ($ip_start - $ip_end | *)"
+			;;
+		*)
+			filter="$filter ($excp | *)"
+			;;
+		esac
+
+		for upstream in $upstreams; do
+			echo "pinstance main upstream \"$upstream\" in blacklist table{$filter };" >> $CONFFILE
+			echo "pinstance main upstream \"$upstream\" out blacklist table{$filter };" >> $CONFFILE
 		done
-		echo "pinstance main upstream \"$upstream\" in blacklist table{$filter };" >> $CONFFILE
-		echo "pinstance main upstream \"$upstream\" out blacklist table{$filter };" >> $CONFFILE
+
+		for downstream in $downstreams; do
+			echo "pinstance main downstream \"$downstream\" in blacklist table{$filter };" >> $CONFFILE
+			echo "pinstance main downstream \"$downstream\" out blacklist table{$filter };" >> $CONFFILE
+		done
+	done
+}
+
+config_sysfs_mcast_snooping() {
+	local devsec=
+	local sectype=
+	local devtype=
+	local ports=
+
+	for downstream in $downstreams; do
+		devsec="$(uci show network | grep name=.*$downstream | cut -d'.' -f2)"
+		sectype="$(uci -q get network.$devsec)"
+		devtype="$(uci -q get network.$devsec.type)"
+		if [ "$sectype" == "device" -a "$devtype" == "bridge" ]; then
+			echo 1 > /sys/class/net/$downstream/bridge/multicast_snooping
+		fi
 	done
 }
 
@@ -72,6 +96,7 @@ config_mcproxy_instance() {
 	local exceptions=
 	local upstreams=
 	local downstreams=
+	local intf_has_ip=
 
 	CONFFILE=/var/etc/mcproxy_"$protocol".conf
 	rm -f $CONFFILE
@@ -117,16 +142,57 @@ config_mcproxy_instance() {
 		downstreams=$mld_p_down_interfaces
 	fi
 
+	# for snooping to work we should enable it on the bridge, doing it from
+	# here instead of from inside network config
+	config_sysfs_mcast_snooping
+
+	[ -n "$max_groups" ] && echo -e "max_groups $max_groups;" >> $CONFFILE
 	[ -n "$robustness" ] && echo -e "rv $robustness;" >> $CONFFILE
 	[ -n "$query_interval" ] && echo -e "qi $query_interval;" >> $CONFFILE
 	[ -n "$q_resp_interval" ] && echo -e "qri $q_resp_interval;" >> $CONFFILE
 	[ -n "$last_mem_q_int" ] && echo -e "lmqi $last_mem_q_int;" >> $CONFFILE
-	[ -n "$fast_leave" ] && echo -e "fastleave $fast_leave;\n" >> $CONFFILE
+	if [[ -n $fast_leave ]]; then
+		echo -e "fastleave $fast_leave;\n" >> $CONFFILE
+		config_sysfs_mcast_fastleave $fast_leave
+	fi
 
 	[ -n "$upstreams" ] && [ -n "$downstreams" ] &&
 		config_mcproxy_interfaces "$upstreams" "$downstreams" "$exceptions"
 
-	PROG_PARAMS="${PROG_PARAMS} -f ${CONFFILE}${PROG_PARAMS_SEPARATOR}"
+	# In case on proxy, upstreams is a list. Iterating and running the mcproxy
+	# for each valid upstream interface
+	for upstream_device in $upstreams;
+	do
+		# Read the upstream interface for the upstream device
+		# upstream device can have multiple logical interfaces like wan and wan6
+		# but same l3 device
+		local upstream_ifaces=$(get_network_of $upstream_device)
+
+		for iface in $upstream_ifaces;
+		do
+			if [ "$protocol" == "igmp" ]; then
+				network_get_ipaddr upstream_ip $iface
+				if [ ! -z "${upstream_ip}" ]; then
+					intf_has_ip=1
+					break
+				fi
+			fi
+
+			if [ "$protocol" == "mld" ]; then
+				network_get_ipaddr6 upstream_ip $iface
+				if [ ! -z "${upstream_ip}" ]; then
+					intf_has_ip=1
+					break
+				fi
+			fi
+		done
+
+		if [ -z "${intf_has_ip}" ]; then
+			continue
+		fi
+
+		PROG_PARAMS="${PROG_PARAMS} -f ${CONFFILE}${PROG_PARAMS_SEPARATOR}"
+	done
 }
 
 config_mcproxy() {
@@ -139,11 +205,41 @@ config_mcproxy() {
 	fi
 }
 
+config_sysfs_mcast_fastleave() {
+	local devsec=
+	local sectype=
+	local devtype=
+	local ports=
+
+	for downstream in $downstreams; do
+		devsec="$(uci show network | grep name=.*$downstream | cut -d'.' -f2)"
+		sectype="$(uci -q get network.$devsec)"
+		devtype="$(uci -q get network.$devsec.type)"
+		if [ "$sectype" == "device" -a "$devtype" == "bridge" ]; then
+			ports="$(uci get network.$devsec.ports)"
+			for prt in $ports; do
+				echo $1 > /sys/class/net/$prt/brport/multicast_fast_leave
+			done
+		else
+			[[ -f  /sys/class/net/$downstream/brport/multicast_fast_leave ]] && echo $1 > /sys/class/net/$downstream/brport/multicast_fast_leave
+		fi
+	done
+
+}
+
 configure_mcast() {
 	config_global_params "set_max_groups_and_sources"
 
+	# mcproxy reserves two multicast subscriptions for igmp router service groups
+	local mg=$(cat /proc/sys/net/ipv4/igmp_max_memberships)
+	mg=$((mg+2))
+	echo $mg > /proc/sys/net/ipv4/igmp_max_memberships
+
 	read_mcast_snooping_params
 	read_mcast_proxy_params
-
 	config_mcproxy
+
+	if [ -z "${PROG_PARAMS}" ]; then
+		exit 0
+	fi
 }

mcastmngr/files/linux/usr/libexec/rpcd/mcast

@@ -0,0 +1,151 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+read_mcast_stats() {
+
+	temp_igmp_file='/tmp/igmp_stats_'$$
+	# Sending signal to mcproxy to dump multicast data in /tmp/igmp_snooping_stats
+	mcast_pids=$(pidof mcproxy)
+	for pid in $mcast_pids
+	do
+		$(kill -10 $pid)
+	done
+	cat /tmp/igmp_snooping_stats > temp_igmp_file
+
+	local mcast_addrs=""
+	local ifaces=""
+
+	while read line; do
+	# reading each line
+		case $line in
+		br-*)
+			found_iface=0
+			snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+			if [ -z "$ifaces" ]; then
+				ifaces="$snoop_iface"
+				continue
+			fi
+
+			IFS=" "
+			for ifx in $ifaces; do
+				if [ $ifx == $snoop_iface ]; then
+					found_iface=1
+					break
+				fi
+			done
+
+			if [ $found_iface -eq 0 ]; then
+				ifaces="$ifaces $snoop_iface"
+				continue
+			fi
+			;;
+		esac
+	done < temp_igmp_file
+
+	while read line; do
+	# reading each line
+		case $line in
+		br-*)
+			found_ip=0
+			grp_ip="$(echo $line | awk -F ' ' '{ print $2 }')"
+			if [ -z "$mcast_addrs" ]; then
+				mcast_addrs="$grp_ip"
+				continue
+			fi
+
+			IFS=" "
+			for ip_addr in $mcast_addrs; do
+				if [ $ip_addr == $grp_ip ]; then
+					found_ip=1
+					break
+				fi
+			done
+
+			if [ $found_ip -eq 0 ]; then
+				mcast_addrs="$mcast_addrs $grp_ip"
+				continue
+			fi
+			;;
+		esac
+	done < temp_igmp_file
+
+	json_init
+	json_add_array "snooping"
+	json_add_object ""
+	IFS=" "
+	for intf in $ifaces; do
+		while read line; do
+		# reading each line
+			case $line in
+			br-*)
+				snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+				if [ "$snoop_iface" != "$intf" ]; then
+					continue
+				fi
+				json_add_string "interface" "$intf"
+				json_add_array "groups"
+				break
+				;;
+			esac
+		done < temp_igmp_file
+		IFS=" "
+		for gip_addr in $mcast_addrs; do
+			grp_obj_added=0
+			while read line; do
+			# reading each line
+				case $line in
+				br-*)
+					snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+					if [ "$snoop_iface" != "$intf" ]; then
+						continue
+					fi
+					grp_ip="$(echo $line | awk -F ' ' '{ print $2 }')"
+					if [ "$grp_ip" != "$gip_addr" ]; then
+						continue
+					fi
+					if [ $grp_obj_added -eq 0 ]; then
+						json_add_object ""
+						gip="$(ipcalc.sh $gip_addr | grep IP | awk '{print substr($0,4)}')"
+						json_add_string "groupaddr" "$gip"
+						json_add_array "clients"
+						grp_obj_added=1
+					fi
+
+					json_add_object ""
+					host_ip="$(echo $line | awk -F ' ' '{ print $3 }')"
+					h_ip="$(ipcalc.sh $host_ip | grep IP | awk '{print substr($0,4)}')"
+					json_add_string "ipaddr" "$h_ip"
+					src_port="$(echo $line | awk -F ' ' '{ print $4 }')"
+					json_add_string "device" "$src_port"
+					timeout="$(echo $line | awk -F ' ' '{ print $5 }')"
+					json_add_int "timeout" "$timeout"
+					json_close_object #close the associated device object
+					;;
+				esac
+			done < temp_igmp_file
+			json_close_array #close the associated devices array
+			json_close_object # close the groups object
+		done # close the loop for group addresses
+		json_close_array #close the groups array
+	done # close the loop for interfaces
+	json_close_object # close the snooping object
+	json_close_array # close the snooping array
+	json_dump
+
+	rm -f temp_igmp_file
+}
+
+case "$1" in
+	list)
+		echo '{ "stats":{} }'
+		;;
+	call)
+		case "$2" in
+			stats)
+				read_mcast_stats
+				;;
+		esac
+		;;
+esac

obuspa/Config.in

@@ -23,7 +23,7 @@ config OBUSPA_MTP_ENABLE_COAP
 	default y
 
 config OBUSPA_CONTROLLER_MTP_VERIFY
-	bool "Enable verification of MQTT response topic before processing the message"
+	bool "Enable verification of controller MTP before processing the message"
 	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=7.0.2.4
+PKG_VERSION:=7.0.2.16
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/obuspa.git
-PKG_SOURCE_VERSION:=902d7a9586c3faa16337fef71f538daa878a47b8
+PKG_SOURCE_VERSION:=312a739dc9106e8ff490288ba22270f4ce7e1fed
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

obuspa/files/etc/init.d/obuspa

@@ -55,38 +55,28 @@ db_set_sql()
 	value="$*"
 
 	if [ -n "${param}" ] && [ -n "${value}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c dbset "${param}" "${value}" >/dev/null 2>&1
-	fi
-}
-
-db_del_sql()
-{
-	local param
-
-	param="${1}"
-
-	if [ -n "${param}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c dbdel "${param}" >/dev/null 2>&1
+		if grep -q "${param} " ${DB_DUMP}; then
+			value="${value//\//\\/}"
+			sed -i "s/${param} .*/${param} \"${value}\"/g" ${DB_DUMP}
+		else
+			echo "${param} \"${value}\"" >> ${DB_DUMP}
+		fi
 	fi
 }
 
 db_set()
 {
-	# if sql db present, update sql db
-	# else update reset file
-	if [ -f "${SQL_DB_FILE}" ]; then
+	# if sql db dump file present, update it
+	if [ -f "${DB_DUMP}" ]; then
 		db_set_sql "$@"
 	else
 		db_set_reset_file "$@"
 	fi
 }
 
-update_db_dump()
+dump_db()
 {
-	if [ -f "${DB_DUMP}" ]; then
-		rm ${DB_DUMP}
-		${PROG} -f ${SQL_DB_FILE} -c show database |sort > ${DB_DUMP}
-	fi
+	${PROG} -f ${SQL_DB_FILE} -c show database |awk 'NR>1 {print $1 " \"" $3 "\""}' | sort  > ${DB_DUMP}
 }
 
 # if db present then check if it matches with existing instances
@@ -102,7 +92,7 @@ get_base_path()
 	count=0
 
 	if [ -f "${DB_DUMP}" ]; then
-		path=$(grep "${refpath}\d.Alias => ${value}" ${DB_DUMP})
+		path=$(grep "${refpath}\d.Alias \"${value}\"" ${DB_DUMP})
 		path=${path%.*}
 		if [ -z "${path}" ]; then
 			path=$(grep -o "${refpath}\d" ${DB_DUMP} |sort -r|head -n 1)
@@ -234,7 +224,10 @@ validate_controller_section()
 		'Host:string' \
 		'Port:port' \
 		'Path:string' \
-		'EnableEncryption:bool'
+		'EnableEncryption:bool' \
+		'PeriodicNotifInterval:uinteger' \
+		'SessionMode:string:Allow'
+
 }
 
 validate_subscription_section()
@@ -259,6 +252,7 @@ validate_mtp_section()
 		'mqtt:string' \
 		'stomp:string' \
 		'Reference:string' \
+		'PublishQoS:uinteger' \
 		'EnableEncryption:bool'
 }
 
@@ -310,7 +304,6 @@ configure_localagent()
 	}
 
 	db_set Device.LocalAgent.EndpointID "${EndpointID}"
-	update_db_dump
 }
 
 update_reset_reason()
@@ -327,7 +320,7 @@ configure_controller()
 	local EndpointID Enable 
 	local Protocol Destination
 	local Topic mqtt stomp assigned_role_name AssignedRole ParameterName
-	local Host Port Path EnableEncryption Reference
+	local Host Port Path EnableEncryption Reference SessionMode PeriodicNotifInterval
 	local dm_ref sec
 
 	sec="${1}"
@@ -364,6 +357,15 @@ configure_controller()
 	db_set "${BASEPATH}.Alias" "${sec}"
 	db_set "${BASEPATH}.Enable" "${Enable}"
 	db_set "${BASEPATH}.EndpointID" "${EndpointID}"
+
+	if [ -n "${PeriodicNotifInterval}" ]; then
+		db_set "${BASEPATH}.PeriodicNotifInterval" "${PeriodicNotifInterval}"
+	fi
+
+	if [ -n "${SessionMode}" ]; then
+		db_set "${BASEPATH}.E2ESession.SessionMode" "${SessionMode}"
+	fi
+
 	if [ -n "${assigned_role_name}" ]; then
 		AssignedRole=$(get_role_index "${assigned_role_name}")
 	fi
@@ -404,9 +406,6 @@ configure_controller()
 		db_set "${BASEPATH}.BootParameter.${_pnum}.ParameterName" "${param}"
 		_pnum=$(( _pnum + 1 ))
 	done
-
-	db_set
-	update_db_dump
 }
 
 configure_subscription()
@@ -499,7 +498,6 @@ configure_challenges()
 	sec="${1}"
 	validate_challenge_section "${1}" || {
 		log "Validation of challenge section failed"
-		exit 1;
 	}
 
 	sec="${sec/challenge_/cpe-}"
@@ -532,7 +530,7 @@ configure_challenges()
 
 configure_mtp() {
 	local Enable Protocol ResponseTopicConfigured
-	local Path Port EnableEncryption
+	local Path Port EnableEncryption PublishQoS
 	local stomp mqtt dm_ref sec
 
 	sec="${1}"
@@ -571,6 +569,9 @@ configure_mtp() {
 	if [ "${Protocol}" = "MQTT" ]; then
 		db_set "${BASEPATH}.MQTT.Reference" "${dm_ref}"
 		db_set "${BASEPATH}.MQTT.ResponseTopicConfigured" "${ResponseTopicConfigured}"
+		if [ -n "${PublishQoS}" ]; then
+			db_set "${BASEPATH}.MQTT.PublishQoS" "${PublishQoS}"
+		fi
 	elif [ "${Protocol}" = "STOMP" ]; then
 		db_set "${BASEPATH}.STOMP.Reference" "${dm_ref}"
 		db_set "${BASEPATH}.STOMP.Destination" "${Destination}"
@@ -582,8 +583,6 @@ configure_mtp() {
 		db_set "${BASEPATH}.WebSocket.Port" "${Port}"
 		db_set "${BASEPATH}.WebSocket.EnableEncryption" "${EnableEncryption}"
 	fi
-	db_set
-	update_db_dump
 }
 
 configure_stomp_connection() {
@@ -614,8 +613,6 @@ configure_stomp_connection() {
 	db_set "${BASEPATH}.EnableEncryption" "${EnableEncryption}"
 	db_set "${BASEPATH}.EnableHeartbeats" "${EnableHeartbeats}"
 	db_set "${BASEPATH}.VirtualHost" "${VirtualHost}"
-	db_set
-	update_db_dump
 }
 
 configure_mqtt_client() {
@@ -645,9 +642,6 @@ configure_mqtt_client() {
 	db_set "${BASEPATH}.ProtocolVersion" "${ProtocolVersion}"
 	db_set "${BASEPATH}.TransportProtocol" "${TransportProtocol}"
 	db_set "${BASEPATH}.ClientID" "${ClientID}"
-
-	db_set
-	update_db_dump
 }
 
 
@@ -701,6 +695,9 @@ configure_obuspa() {
 	fi
 
 	if [ -f "${RESET_FILE}" ]; then
+		if [ -f "${SQL_DB_FILE}" ]; then
+			mv ${SQL_DB_FILE} ${SQL_DB_FILE}.old
+		fi
 		procd_append_param command -r ${RESET_FILE}
 	fi
 
@@ -745,9 +742,9 @@ get_param_value_from_dump()
 		return 0
 	fi
 
-	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $3}')"
+	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $2}')"
 
-	echo "$value"
+	echo "${value//\"/}"
 }
 
 update_uci_sec()
@@ -771,7 +768,7 @@ sync_db_controller()
 {
 	local cntrs copts sec pvalue protocol
 
-	copts="Enable EndpointID AssignedRole"
+	copts="Enable EndpointID AssignedRole PeriodicNotifInterval"
 	popts="Destination Topic Reference Host Port Path EnableEncryption"
 
 	cntrs="$(get_instances_from_db_dump Device.LocalAgent.Controller.)"
@@ -804,7 +801,7 @@ sync_db_localagent_mtp()
 	local mtps opts popts sec pvalue protocol
 
 	opts="Enable"
-	popts="ResponseTopicConfigured Destination Port Path Reference EnableEncryption"
+	popts="ResponseTopicConfigured Destination Port Path Reference EnableEncryption PublishQoS"
 	ropts="mqtt stomp"
 
 	mtps="$(get_instances_from_db_dump Device.LocalAgent.MTP.)"
@@ -920,10 +917,8 @@ delete_sql_db_entry_with_pattern()
 		return 0;
 	fi
 
-	params="$(grep "${pattern}" ${DB_DUMP}|awk '{print $1}')"
-	for p in ${params}; do
-		db_del_sql "${p}"
-	done
+	#log "Deleting with pattern [${pattern}] from ${DB_DUMP}"
+	sed -i "/${pattern}/d" ${DB_DUMP}
 }
 
 check_n_delete_db()
@@ -939,7 +934,7 @@ check_n_delete_db()
 	r="${3}"
 	sec="${sec/${t}_/cpe-}"
 
-	path=$(grep "${r}\d.Alias => ${sec}" ${DB_DUMP})
+	path=$(grep "${r}\d.Alias \"${sec}\"" ${DB_DUMP})
 	path=${path%.*}
 
 	delete_sql_db_entry_with_pattern "${path}"
@@ -967,28 +962,42 @@ db_init()
 
 	reason="${1}"
 	mkdir -p /tmp/obuspa/
+
 	# Load configuration
 	config_load $CONFIGURATION
 	config_get SQL_DB_FILE global db_file "/tmp/obuspa/usp.db"
 
+	if [ -f "${SQL_DB_FILE}.old" ] && [ ! -f "${SQL_DB_FILE}" ]; then
+		log "Copying old db, since new db not present ..."
+		mv ${SQL_DB_FILE}.old ${SQL_DB_FILE}
+	fi
+
 	# Dump datamodel parameters from DB
 	if [ -f "${SQL_DB_FILE}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c show database |sort > ${DB_DUMP}
+		dump_db
 	fi
 
-	# Only sync uci with db in case of non service triggers
+	# In case of Reboot or service restart update the uci
+        # from usp.db file
 	if [ -f "${DB_DUMP}" ] && [ "${reason}" != "update" ]; then
-		sync_uci_with_db
+		# Only do this if db have reasonable data
+		val="$(awk 'END{print NR}' ${DB_DUMP})"
+		if [ "$val" -gt 15 ]; then
+			log "Syncing obuspa uci with usp.db ...."
+			sync_uci_with_db
+		fi
 	fi
 
-	# remove entries from db if deleted from uci
+	# remove entries from db if deleted from uci, only in case of reload
 	if [ -f "${DB_DUMP}" ] && [ "${reason}" = "update" ] && [ -f "/tmp/obuspa/obuspa" ]; then
+		log "Deleting entries from usp.db if uci not present ...."
 		reverse_update_db_with_uci
 	fi
 
 	# Remove reset file if present
-	[ -f "${RESET_FILE}" ] && rm -f ${RESET_FILE}
+	[ -f "${RESET_FILE}" ] && mv ${RESET_FILE} ${RESET_FILE}.old
 
+	#log "Create reset file ...."
 	config_load $CONFIGURATION
 	global_init
 	config_foreach configure_localagent localagent
@@ -1009,8 +1018,9 @@ db_init()
 	uci_commit ${CONFIGURATION}
 
 	cp /etc/config/obuspa /tmp/obuspa/
-
-	[ -f "${DB_DUMP}" ] && rm -f ${DB_DUMP}
+	if [ -f "${DB_DUMP}" ]; then
+		mv ${DB_DUMP} ${RESET_FILE}
+	fi
 
 	return 0;
 }

obuspa/patches/0001-validate-controller-mtp.patch

@@ -0,0 +1,117 @@
+diff --git a/src/core/device.h b/src/core/device.h
+index 5ca0782..ee6d88c 100644
+--- a/src/core/device.h
++++ b/src/core/device.h
+@@ -157,6 +157,9 @@ int DEVICE_CONTROLLER_Start(void);
+ void DEVICE_CONTROLLER_Stop(void);
+ int DEVICE_CONTROLLER_FindInstanceByEndpointId(char *endpoint_id);
+ int DEVICE_CONTROLLER_QueueBinaryMessage(mtp_send_item_t *msi, char *endpoint_id, char *usp_msg_id, mtp_reply_to_t *mtp_reply_to, time_t expiry_time);
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++bool DEVICE_CONTROLLER_IsMTPAllowed(char *endpoint_id, mtp_reply_to_t *mrt);
++#endif
+ bool DEVICE_CONTROLLER_IsMTPConfigured(char *endpoint_id, mtp_protocol_t protocol);
+ char *DEVICE_CONTROLLER_FindEndpointIdByInstance(int instance);
+ char *DEVICE_CONTROLLER_FindEndpointByMTP(mtp_reply_to_t *mrt);
+diff --git a/src/core/device_controller.c b/src/core/device_controller.c
+index ae609f5..a6335f5 100644
+--- a/src/core/device_controller.c
++++ b/src/core/device_controller.c
+@@ -900,6 +900,78 @@ int DEVICE_CONTROLLER_QueueBinaryMessage(mtp_send_item_t *msi, char *endpoint_id
+     return USP_ERR_OK;
+ }
+ 
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++/*********************************************************************//**
++**
++** DEVICE_CONTROLLER_IsMTPAllowed
++**
++** Determines whether an MTP is allowed to be used by the specified controller
++** This function is used by ValidateUspRecord() to determine whether to process a received USP message
++**
++** \param   endpoint_id - Endpoint ID of controller that sent a USP message
++** \param   mrt - pointer to structure specifying on which MTP the message was received
++**
++** \return  true if the MTP is allowed, false otherwise
++**
++**************************************************************************/
++bool DEVICE_CONTROLLER_IsMTPAllowed(char *endpoint_id, mtp_reply_to_t *mrt)
++{
++    controller_t *cont = FindEnabledControllerByEndpointId(endpoint_id);
++    controller_mtp_t *mtp;
++
++    // Disallow if no controller instance is found
++    if (cont == NULL)
++    {
++        return false;
++    }
++
++    mtp = FindFirstEnabledMtp(cont, mrt->protocol);
++
++#ifdef ENABLE_WEBSOCKETS
++    // Allow websocket server if no other MTP is configured
++    if ((mrt->protocol == kMtpProtocol_WebSockets) && (mrt->wsserv_conn_id != INVALID))
++    {
++        return mtp == NULL;
++    }
++#endif
++
++    // Disallow if there is no MTP configured with matching protocol
++    if ((mtp == NULL) || (mtp->protocol != mrt->protocol))
++    {
++        return false;
++    }
++
++    // Check that the configured MTP matches the MTP on which the message was received
++    switch(mtp->protocol)
++    {
++#ifndef DISABLE_STOMP
++        case kMtpProtocol_STOMP:
++            return mtp->stomp_connection_instance == mrt->stomp_instance;
++#endif
++
++#ifdef ENABLE_COAP
++        case kMtpProtocol_CoAP:
++            return true;  // More detailed checks are not implemented for CoAP
++#endif
++
++#ifdef ENABLE_MQTT
++        case kMtpProtocol_MQTT:
++            return mtp->mqtt_connection_instance == mrt->mqtt_instance;
++#endif
++
++#ifdef ENABLE_WEBSOCKETS
++        case kMtpProtocol_WebSockets:
++            return (mrt->wsclient_cont_instance == cont->instance) && (mrt->wsclient_mtp_instance == mtp->instance);
++#endif
++        default:
++            TERMINATE_BAD_CASE(mtp->protocol);
++            break;
++    }
++
++    return false;
++}
++#endif
++
+ /*********************************************************************//**
+ **
+ ** DEVICE_CONTROLLER_IsMTPConfigured
+diff --git a/src/core/msg_handler.c b/src/core/msg_handler.c
+index 8313342..a953562 100644
+--- a/src/core/msg_handler.c
++++ b/src/core/msg_handler.c
+@@ -759,6 +759,15 @@ int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt)
+         return USP_ERR_RECORD_FIELD_INVALID;
+     }
+ 
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++    // Exit if the controller is not allowed to use the MTP on which the message was received
++    if (DEVICE_CONTROLLER_IsMTPAllowed(rec->from_id, mrt) == false)
++    {
++        USP_ERR_SetMessage("%s: Ignoring message from endpoint_id=%s (unauthorized MTP)", __FUNCTION__, rec->from_id);
++        return USP_ERR_PERMISSION_DENIED;
++    }
++#endif
++
+     // Exit if the controller is unknown
+     cur_msg_controller_instance = DEVICE_CONTROLLER_FindInstanceByEndpointId(rec->from_id);
+     if (cur_msg_controller_instance == INVALID)

obuspa/patches/0003-set-internal-role-fix.patch

@@ -10,7 +10,7 @@
      {
 --- a/src/core/data_model.h
 +++ b/src/core/data_model.h
-@@ -324,6 +324,7 @@ void DATA_MODEL_DumpSchema(void);
+@@ -325,6 +325,7 @@ void DATA_MODEL_DumpSchema(void);
  void DATA_MODEL_DumpInstances(void);
  char DATA_MODEL_GetJSONParameterType(char *path);
  int DATA_MODEL_SetParameterInDatabase(char *path, char *value);

obuspa/patches/0004-suppress-notification-logs.patch

@@ -1,6 +1,6 @@
 --- a/src/core/data_model.c
 +++ b/src/core/data_model.c
-@@ -1239,7 +1239,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
+@@ -1242,7 +1242,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
      // Exit if instance already exists - nothing to do
      if (exists)
      {
@@ -9,7 +9,7 @@
          return USP_ERR_CREATION_FAILURE;
      }
  
-@@ -1324,7 +1324,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
+@@ -1327,7 +1327,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
      // Exit if instance does not exist - nothing to do
      if (exists == false)
      {

obuspa/patches/0007-bdc_csv_format.patch

@@ -1,8 +1,6 @@
-diff --git a/src/core/bdc_exec.c b/src/core/bdc_exec.c
-index 3670361..6a6325d 100644
 --- a/src/core/bdc_exec.c
 +++ b/src/core/bdc_exec.c
-@@ -547,11 +547,19 @@ int StartSendingReport(bdc_connection_t *bc)
+@@ -547,11 +547,19 @@ int StartSendingReport(bdc_connection_t
  
      // Set the list of headers
      bc->headers = NULL;
@@ -25,8 +23,6 @@ index 3670361..6a6325d 100644
  
      if (bc->flags & BDC_FLAG_GZIP)
      {
-diff --git a/src/core/bdc_exec.h b/src/core/bdc_exec.h
-index ff37a2d..ee29c85 100644
 --- a/src/core/bdc_exec.h
 +++ b/src/core/bdc_exec.h
 @@ -53,6 +53,9 @@ void BDC_EXEC_ScheduleExit(void);
@@ -40,8 +36,6 @@ index ff37a2d..ee29c85 100644
 +#define BDC_FLAG_HEADER_PER_COL  0x00000040 // If set, report format in header would be csv ParameterPerColumn
  
  #endif
-diff --git a/src/core/device_bulkdata.c b/src/core/device_bulkdata.c
-index a7d1b3e..fab9731 100755
 --- a/src/core/device_bulkdata.c
 +++ b/src/core/device_bulkdata.c
 @@ -67,9 +67,12 @@
@@ -78,7 +72,7 @@ index a7d1b3e..fab9731 100755
  } profile_ctrl_params_t;
  
  //------------------------------------------------------------------------------
-@@ -208,6 +217,7 @@ int Validate_BulkDataEncodingType(dm_req_t *req, char *value);
+@@ -208,6 +217,7 @@ int Validate_BulkDataEncodingType(dm_req
  int Validate_BulkDataReportingInterval(dm_req_t *req, char *value);
  int Validate_BulkDataReference(dm_req_t *req, char *value);
  int Validate_BulkDataReportFormat(dm_req_t *req, char *value);
@@ -86,7 +80,7 @@ index a7d1b3e..fab9731 100755
  int Validate_BulkDataReportTimestamp(dm_req_t *req, char *value);
  int Validate_BulkDataCompression(dm_req_t *req, char *value);
  int Validate_BulkDataHTTPMethod(dm_req_t *req, char *value);
-@@ -236,6 +246,8 @@ bulkdata_profile_t *bulkdata_find_profile(int profile_id);
+@@ -236,6 +246,8 @@ bulkdata_profile_t *bulkdata_find_profil
  int bulkdata_calc_report_map(bulkdata_profile_t *bp, kv_vector_t *report_map);
  int bulkdata_reduce_to_alt_name(char *spec, char *path, char *alt_name, char *out_buf, int buf_len);
  char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp, char *report_format);
@@ -95,7 +89,7 @@ index a7d1b3e..fab9731 100755
  unsigned char *bulkdata_compress_report(profile_ctrl_params_t *ctrl, char *input_buf, int input_len, int *p_output_len);
  int bulkdata_schedule_sending_http_report(profile_ctrl_params_t *ctrl, bulkdata_profile_t *bp, unsigned char *json_report, int report_len);
  int bulkdata_start_profile(bulkdata_profile_t *bp);
-@@ -250,6 +262,7 @@ char *bulkdata_platform_calc_uri_query_string(kv_vector_t *escaped_map);
+@@ -250,6 +262,7 @@ char *bulkdata_platform_calc_uri_query_s
  int bulkdata_platform_get_param_refs(int profile_id, param_ref_vector_t *param_refs);
  void bulkdata_expand_param_ref(param_ref_entry_t *pr, group_get_vector_t *ggv);
  void bulkdata_append_to_result_map(param_ref_entry_t *pr, group_get_vector_t *ggv, kv_vector_t *report_map);
@@ -135,7 +129,7 @@ index a7d1b3e..fab9731 100755
      // Device.BulkData.Profile.{i}.HTTP
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.HTTP.URL", "", NULL, NotifyChange_BulkDataURL, DM_STRING);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.HTTP.Username", "", NULL, NULL, DM_STRING);
-@@ -591,9 +611,10 @@ int Validate_BulkDataProtocol(dm_req_t *req, char *value)
+@@ -591,9 +611,10 @@ int Validate_BulkDataProtocol(dm_req_t *
  int Validate_BulkDataEncodingType(dm_req_t *req, char *value)
  {
      // Exit if trying to set a value outside of the range we accept
@@ -148,12 +142,10 @@ index a7d1b3e..fab9731 100755
          return USP_ERR_INVALID_VALUE;
      }
  
-@@ -674,6 +695,32 @@ int Validate_BulkDataReportFormat(dm_req_t *req, char *value)
-     return USP_ERR_OK;
- }
+@@ -676,6 +697,32 @@ int Validate_BulkDataReportFormat(dm_req
  
-+/*********************************************************************//**
-+**
+ /*********************************************************************//**
+ **
 +** Validate_BulkDataCSVReportFormat
 +**
 +** Validates Device.BulkData.Profile.{i}.CSVEncoding.ReportFormat
@@ -178,10 +170,12 @@ index a7d1b3e..fab9731 100755
 +    return USP_ERR_OK;
 +}
 +
- /*********************************************************************//**
- **
++/*********************************************************************//**
++**
  ** Validate_BulkDataReportTimestamp
-@@ -1970,6 +2017,14 @@ int bulkdata_platform_get_profile_control_params(bulkdata_profile_t *bp, profile
+ **
+ ** Validates Device.BulkData.Profile.{i}.JSONEncoding.ReportTimestamp
+@@ -1970,6 +2017,14 @@ int bulkdata_platform_get_profile_contro
          return err;
      }
  
@@ -196,7 +190,7 @@ index a7d1b3e..fab9731 100755
      // Exit if unable to get ReportTimestamp
      USP_SNPRINTF(path, sizeof(path), "Device.BulkData.Profile.%d.JSONEncoding.ReportTimestamp", bp->profile_id);
      err = DATA_MODEL_GetParameterValue(path, ctrl_params->report_timestamp, sizeof(ctrl_params->report_timestamp), 0);
-@@ -1986,6 +2041,46 @@ int bulkdata_platform_get_profile_control_params(bulkdata_profile_t *bp, profile
+@@ -1986,6 +2041,46 @@ int bulkdata_platform_get_profile_contro
          return err;
      }
  
@@ -243,7 +237,7 @@ index a7d1b3e..fab9731 100755
      return USP_ERR_OK;
  }
  
-@@ -2222,7 +2317,7 @@ void bulkdata_process_profile_http(bulkdata_profile_t *bp)
+@@ -2222,7 +2317,7 @@ void bulkdata_process_profile_http(bulkd
  {
      int err;
      report_t *cur_report;
@@ -252,7 +246,7 @@ index a7d1b3e..fab9731 100755
      profile_ctrl_params_t ctrl;
      unsigned char *compressed_report;
      int compressed_len;
-@@ -2261,10 +2356,23 @@ void bulkdata_process_profile_http(bulkdata_profile_t *bp)
+@@ -2261,10 +2356,23 @@ void bulkdata_process_profile_http(bulkd
      }
  
      // Exit if unable to generate the report
@@ -280,7 +274,7 @@ index a7d1b3e..fab9731 100755
          return;
      }
  
-@@ -2273,14 +2381,14 @@ void bulkdata_process_profile_http(bulkdata_profile_t *bp)
+@@ -2273,14 +2381,14 @@ void bulkdata_process_profile_http(bulkd
      USP_LOG_Info("BULK DATA: using compression method=%s", ctrl.compression);
      if (enable_protocol_trace)
      {
@@ -299,7 +293,7 @@ index a7d1b3e..fab9731 100755
      }
      // NOTE: From this point on, only the compressed_report exists
  
-@@ -2310,9 +2418,15 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+@@ -2310,9 +2418,15 @@ void bulkdata_process_profile_usp_event(
      kv_vector_t event_args;
      kv_pair_t kv;
      report_t *cur_report;
@@ -316,7 +310,7 @@ index a7d1b3e..fab9731 100755
  
      // Exit if the MTP has not been connected to successfully after bootup
      // This is to prevent BDC events being enqueued before the Boot! event is sent (the Boot! event is only sent after successfully connecting to the MTP).
-@@ -2321,20 +2435,62 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+@@ -2321,20 +2435,62 @@ void bulkdata_process_profile_usp_event(
          goto exit;
      }
  
@@ -390,7 +384,7 @@ index a7d1b3e..fab9731 100755
      }
  
      // When sending via USP events, only one report is ever sent in each USP event
-@@ -2354,10 +2510,16 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+@@ -2354,10 +2510,16 @@ void bulkdata_process_profile_usp_event(
      bp->num_retained_reports = 1;
  
      // Exit if unable to generate the report
@@ -410,7 +404,7 @@ index a7d1b3e..fab9731 100755
          return;
      }
  
-@@ -2365,15 +2527,15 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+@@ -2365,15 +2527,15 @@ void bulkdata_process_profile_usp_event(
  
      // Construct event_args manually to avoid the overhead of a malloc and copy of the report in KV_VECTOR_Add()
      kv.key = "Data";
@@ -429,12 +423,10 @@ index a7d1b3e..fab9731 100755
  
      // From the point of view of this code, the report(s) have been successfully sent, so don't retain them
      // NOTE: Sending of the reports successfully is delegated to the USP notification retry mechanism
-@@ -2833,6 +2995,219 @@ char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timesta
-     return result;
- }
+@@ -2835,6 +2997,219 @@ char *bulkdata_generate_json_report(bulk
  
-+/*********************************************************************//**
-+**
+ /*********************************************************************//**
+ **
 +** append_string_to_target
 +**
 +** concatenates the src string with target string in newly allocated memory
@@ -646,10 +638,12 @@ index a7d1b3e..fab9731 100755
 +    return output;
 +}
 +
- /*********************************************************************//**
- **
++/*********************************************************************//**
++**
  **  bulkdata_compress_report
-@@ -2986,9 +3361,18 @@ int bulkdata_schedule_sending_http_report(profile_ctrl_params_t *ctrl, bulkdata_
+ **
+ **  Compresses the report to send
+@@ -2986,9 +3361,18 @@ int bulkdata_schedule_sending_http_repor
          flags |= BDC_FLAG_DATE_HEADER;
      }
  

obuspc/Makefile

@@ -0,0 +1,72 @@
+#
+# Copyright (C) 2023 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=obuspc
+PKG_VERSION:=1.0.1.1
+
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/obuspa-test-controller.git
+PKG_SOURCE_VERSION:=f1f721bc1a4feaf63c7f7837eb7b0c86111e2f71
+PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/obuspc
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=USP Controller
+  DEPENDS:=+libopenssl +libuci +libblobmsg-json +libcurl +libsqlite3 +libubox +libubus +libmosquitto-ssl +libwebsockets-openssl
+endef
+
+define Package/obuspc/description
+ OB-USP-Controller is a local usp controller based on User Services Platform (USP).
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall \
+	-Werror
+
+CONFIGURE_ARGS += \
+        --localstatedir="/tmp/" \
+	--enable-stomp \
+	--enable-coap \
+	--enable-mqtt \
+	--enable-websockets
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        $(CP) -rf ~/git/obuspa-test-controller/* $(PKG_BUILD_DIR)/
+        $(Build/Patch)
+endef
+endif
+
+define Package/obuspc/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspc $(1)/usr/sbin/
+	$(INSTALL_BIN) ./files/etc/init.d/obuspc $(1)/etc/init.d/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/99-fix-agent-endpoint $(1)/etc/uci-defaults/
+	$(INSTALL_DATA) ./files/etc/config/obuspc $(1)/etc/config/
+endef
+
+$(eval $(call BuildPackage,obuspc))

obuspc/files/etc/config/obuspc

@@ -0,0 +1,19 @@
+config obuspc 'global'
+	option enabled '1'
+	option debug '1'
+	option log_level '1'
+	option prototrace '1'
+
+config mqtt 'mqtt'
+	option BrokerAddress '127.0.0.1'
+	option BrokerPort '1883'
+	option TransportProtocol 'TCP/IP'
+
+config controller 'controller'
+	option EndpointID 'proto::interop-usp-controller'
+	option Protocol 'MQTT'
+	option ResponseTopicConfigured '/usp/controller'
+	option mqtt 'mqtt'
+
+config agent 'agent'
+	option Topic '/usp/endpoint'

obuspc/files/etc/init.d/obuspc

@@ -0,0 +1,349 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+USE_PROCD=1
+
+PROG=/usr/sbin/obuspc
+CONFIGURATION=obuspc
+
+RESET_FILE="/tmp/usp/obuspc_param_reset.txt"
+SQL_DB_FILE="/tmp/usp/uspc.db"
+
+BASEPATH=""
+INSTANCE_COUNT=0
+
+. /usr/share/libubox/jshn.sh
+
+global_init()
+{
+	BASEPATH=""
+	INSTANCE_COUNT=0
+}
+
+log()
+{
+	echo "$*"|logger -t obuspc.init -p debug
+}
+
+db_set_reset_file()
+{
+	local param value
+
+	param="${1}"
+	shift
+	value="$*"
+
+	if [ -n "${param}" ] && [ -n "${value}" ]; then
+		echo "${param} \"${value}\"">>${RESET_FILE}
+	else
+		echo >>${RESET_FILE}
+	fi
+}
+
+db_set()
+{
+	db_set_reset_file "$@"
+}
+
+# if db present then check if it matches with existing instances
+# fallback to max instance present + 1
+# In case of no db get the count
+get_base_path()
+{
+	local refpath value path count
+
+	refpath="${1}"
+	value="${2}"
+	path=""
+	count=0
+
+	if [ -z "${path}" ]; then
+		INSTANCE_COUNT=$(( INSTANCE_COUNT + 1 ))
+		path="${refpath}${INSTANCE_COUNT}"
+	fi
+	BASEPATH="${path}"
+}
+
+get_refrence_path()
+{
+	local dmref value path
+
+	dmref="${1}"
+	value="${2}"
+	path=""
+
+	path=$(grep "${dmref}\d.Alias " ${RESET_FILE}|grep -w "${value}")
+	path=${path%.*}
+	echo "${path}"
+}
+
+validate_global_section()
+{
+	uci_validate_section ${CONFIGURATION} obuspc "${1}" \
+		'enabled:bool:1' \
+		'debug:bool:0' \
+		'prototrace:bool:0' \
+		'log_level:uinteger' \
+		'log_dest:string' \
+		'db_file:string'
+}
+
+validate_mqtt_client_section()
+{
+	uci_validate_section ${CONFIGURATION} mqtt "${1}" \
+		'Enable:bool:1' \
+		'BrokerAddress:string' \
+		'BrokerPort:port:1883' \
+		'Username:string' \
+		'Password:string' \
+		'ProtocolVersion:or("3.1", "3.1.1","5.0"):5.0' \
+		'TransportProtocol:or("TCP/IP","TLS"):TCP/IP' \
+		'ClientID:string'
+}
+
+validate_controller_section()
+{
+	uci_validate_section ${CONFIGURATION} mtp "${1}" \
+		'EndpointID:string' \
+		'Protocol:or("MQTT", "WebSocket")' \
+		'ResponseTopicConfigured:string' \
+		'Destination:string' \
+		'Port:port' \
+		'Path:string' \
+		'mqtt:string' \
+		'stomp:string' \
+		'Reference:string' \
+		'EnableEncryption:bool:0'
+}
+
+configure_controller() {
+	local EndpointID Protocol ResponseTopicConfigured
+	local Destination Path Port EnableEncryption Reference
+	local stomp mqtt dm_ref sec
+
+	sec="${1}"
+	validate_controller_section "${1}" || {
+		log "Validation of mtp section failed"
+		return 1;
+	}
+
+	if [ -z "${EndpointID}" ]; then
+		log "EndpointID not defined for controller"
+		return 1;
+	fi
+
+	db_set Device.LocalAgent.EndpointID "${EndpointID}"
+
+	sec="${sec/mtp_/cpe-}"
+	get_base_path "Device.LocalAgent.MTP." "${sec}"
+	if [ -z "${BASEPATH}" ]; then
+		log "Failed to get path [$BASEPATH]"
+		return 1;
+	fi
+
+	if [ -z "${Protocol}" ]; then
+		log "Protocol not defined for the mtp[${1}] section"
+		return 1;
+	fi
+
+	dm_ref=""
+	if [ -z "${Reference}" ]; then
+		if [ "${Protocol}" = "STOMP" ]; then
+			stomp="${stomp/stomp_/cpe-}"
+			dm_ref=$(get_refrence_path "Device.STOMP.Connection." "${stomp}")
+		elif [ "${Protocol}" = "MQTT" ]; then
+			mqtt="${mqtt/mqtt_/cpe-}"
+			dm_ref=$(get_refrence_path "Device.MQTT.Client." "${mqtt}")
+		fi
+	else
+		dm_ref="${Reference}"
+	fi
+
+	db_set "${BASEPATH}.Alias" "${sec}"
+	db_set "${BASEPATH}.Enable" "1"
+	db_set "${BASEPATH}.Protocol" "${Protocol}"
+	if [ "${Protocol}" = "MQTT" ]; then
+		db_set "${BASEPATH}.MQTT.Reference" "${dm_ref}"
+		db_set "${BASEPATH}.MQTT.ResponseTopicConfigured" "${ResponseTopicConfigured}"
+	elif [ "${Protocol}" = "STOMP" ]; then
+		db_set "${BASEPATH}.STOMP.Reference" "${dm_ref}"
+		db_set "${BASEPATH}.STOMP.Destination" "${Destination}"
+	elif [ "${Protocol}" = "CoAP" ]; then
+		db_set "${BASEPATH}.CoAP.Path" "${Path}"
+		db_set "${BASEPATH}.CoAP.Port" "${Port}"
+	elif [ "${Protocol}" = "WebSocket" ]; then
+		db_set "${BASEPATH}.WebSocket.Path" "${Path}"
+		db_set "${BASEPATH}.WebSocket.Port" "${Port}"
+		db_set "${BASEPATH}.WebSocket.EnableEncryption" "${EnableEncryption}"
+	fi
+	db_set
+}
+
+validate_agent_section()
+{
+	uci_validate_section ${CONFIGURATION} agent "${1}" \
+		'name:string' \
+		'EndpointID:string' \
+		'Topic:string'
+}
+
+configure_agent() {
+	local EndpointID Topic name
+	local stomp mqtt dm_ref sec
+
+	sec="${1}"
+	validate_agent_section "${1}" || {
+		log "Validation of agent section failed"
+		return 1;
+	}
+
+	if [ -z "${EndpointID}" ]; then
+		log "EndpointID not defined for agent"
+		return 1;
+	fi
+
+	if [ -z "${Topic}" ]; then
+		log "Topic not defined for agent"
+		return 1;
+	fi
+
+
+	sec="${sec/mtp_/cpe-}"
+	get_base_path "Device.LocalAgent.Controller." "${sec}"
+	if [ -z "${BASEPATH}" ]; then
+		log "Failed to get path [$BASEPATH]"
+		return 1;
+	fi
+
+	db_set "${BASEPATH}.Alias" "${sec}"
+	db_set "${BASEPATH}.Enable" "1"
+	db_set "${BASEPATH}.EndpointID" "${EndpointID}"
+	db_set "${BASEPATH}.MTP.1.Enable" "1"
+	db_set "${BASEPATH}.MTP.1.Protocol" "MQTT"
+	db_set "${BASEPATH}.MTP.1.MQTT.Reference" "Device.MQTT.Client.1"
+	db_set "${BASEPATH}.MTP.1.MQTT.Topic" "${Topic}"
+	db_set
+}
+
+configure_mqtt_client() {
+	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion
+	local TransportProtocol ClientID
+	local sec
+
+	sec="${1}"
+	validate_mqtt_client_section "${1}" || {
+		log "Validation of mqtt section failed"
+		return 1;
+	}
+
+	sec="${sec/mqtt_/cpe-}"
+	get_base_path "Device.MQTT.Client." "${sec}"
+	if [ -z "${BASEPATH}" ]; then
+		log "Failed to get path [$BASEPATH]"
+		return 1;
+	fi
+
+	db_set "${BASEPATH}.Alias" "${sec}"
+	db_set "${BASEPATH}.Enable" "${Enable}"
+	db_set "${BASEPATH}.BrokerAddress" "${BrokerAddress}"
+	db_set "${BASEPATH}.BrokerPort" "${BrokerPort}"
+	db_set "${BASEPATH}.Username" "${Username}"
+	db_set "${BASEPATH}.Password" "${Password}"
+	db_set "${BASEPATH}.ProtocolVersion" "${ProtocolVersion}"
+	db_set "${BASEPATH}.TransportProtocol" "${TransportProtocol}"
+	db_set "${BASEPATH}.ClientID" "${ClientID}"
+
+	db_set
+}
+
+configure_obuspc() {
+	local enabled trust_cert ifname interface debug prototrace log_level db_file log_dest
+	local client_cert
+
+	validate_global_section "global"
+
+	if [ "${debug}" -ne "0" ]; then
+		# Forward stdout of the command to logd
+		procd_set_param stdout 1
+		# Same for stderr
+		procd_set_param stderr 1
+	fi
+
+	procd_append_param command -u
+	if [ "${prototrace}" -eq 1 ]; then
+		procd_append_param command -p
+	fi
+
+	if [ -n "${log_level}" ]; then
+		procd_append_param command -v "${log_level}"
+	fi
+
+	if [ -n "${log_dest}" ]; then
+		procd_append_param command -l "${log_dest}"
+	fi
+
+	if [ -f "${RESET_FILE}" ]; then
+		procd_append_param command -r ${RESET_FILE}
+	fi
+}
+
+# Create factory reset file
+db_init()
+{
+	# Load configuration
+	config_load $CONFIGURATION
+	config_get SQL_DB_FILE global db_file "/tmp/usp/uspc.db"
+
+	# Remove DB and generate from uci
+	[ -f "${SQL_DB_FILE}" ] && rm -f "${SQL_DB_FILE}"
+
+	# Remove reset file if present
+	[ -f "${RESET_FILE}" ] && rm -f ${RESET_FILE}
+
+	config_load $CONFIGURATION
+	global_init
+	config_foreach configure_mqtt_client mqtt
+	global_init
+	config_foreach configure_controller controller
+	global_init
+	config_foreach configure_agent agent
+
+	return 0;
+}
+
+register_service()
+{
+	procd_open_instance ${CONFIGURATION}
+	procd_set_param command ${PROG}
+
+	configure_obuspc
+	procd_set_param respawn \
+			"${respawn_threshold:-5}" \
+			"${respawn_timeout:-10}" "${respawn_retry:-3}"
+
+	procd_close_instance
+}
+
+start_service() {
+	local enabled
+
+	config_load ${CONFIGURATION}
+	config_get_bool enabled global enabled 0
+
+	if [ "${enabled}" -eq 0 ]; then
+		return 0;
+	fi
+
+	mkdir -p /tmp/usp/
+	db_init
+	register_service
+}
+
+stop_service() {
+	${PROG} -c stop >/dev/null 2>&1
+}
+
+service_triggers() {
+	procd_add_reload_trigger "obuspc"
+}

obuspc/files/etc/uci-defaults/99-fix-agent-endpoint

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+get_oui_from_db()
+{
+	db -q get device.deviceinfo.ManufacturerOUI
+}
+
+get_serial_from_db()
+{
+	db -q get device.deviceinfo.SerialNumber
+}
+
+fix_agent_endpoint()
+{
+	local AgentEndpointID serial oui user pass
+
+	# Get endpoint id from obuspa config first
+	config_load obuspa
+	config_get AgentEndpointID localagent EndpointID ""
+	if [ -z "${AgentEndpointID}" ]; then
+		serial=$(get_serial_from_db)
+		oui=$(get_oui_from_db)
+		AgentEndpointID="os::${oui}-${serial//+/%2B}"
+	fi
+
+	uci -q set obuspc.agent.EndpointID="${AgentEndpointID}"
+}
+
+fix_agent_endpoint

owsd/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.5
+PKG_VERSION:=1.1.6
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
@@ -37,7 +37,7 @@ include $(INCLUDE_DIR)/cmake.mk
 define Package/owsd
   SECTION:=net
   CATEGORY:=Network
-  DEPENDS:=+libjson-c +libblobmsg-json +libwebsockets +ubox \
+  DEPENDS:=+libjson-c +libblobmsg-json +libwebsockets-openssl +ubox \
 	  +OWSD_USE_UBUS:ubus \
 	  +OWSD_USE_DBUS:libdbus \
 	  +OWSD_USE_DBUS:libxml2 \

ponmngr/files/airoha/lib/xpon/airoha.sh

@@ -17,14 +17,15 @@ init_xpon() {
 
 	procd_open_instance ponmgr_cfg
 	procd_set_param command /userfs/bin/ponmgr_cfg
+	procd_set_param respawn
 	procd_close_instance
 	procd_open_instance omci
 	procd_set_param command /userfs/bin/omci
+	procd_set_param respawn
 	procd_close_instance
 }
 
 deinit_xpon() {
-	killall -9 omci 2>/dev/null
-	killall -9 ponmgr_cfg 2>/dev/null
+	return
 }
 

qosmngr/files/airoha/lib/qos/chains.iptables.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# Install iptables rules
+
+iptables_set_traffic_class() {
+    IP_RULE="$IP_RULE -j MARK --set-xmark 0x${1}0/0xF0"
+}

qosmngr/files/airoha/lib/qos/qos.sh

@@ -5,13 +5,14 @@
 include /lib/ethernet
 
 . /lib/qos/iptables.sh
-. /lib/qos/common/chains.ebtables.sh
+. /lib/qos/chains.ebtables.sh
+. /lib/qos/chains.iptables.sh
 . /lib/qos/ebtables.sh
 . /lib/qos/ip_rule.sh
 . /lib/qos/classify.sh
-. /lib/qos/common/policer.sh
-. /lib/qos/common/queue.sh
-. /lib/qos/common/shaper.sh
+. /lib/qos/policer.sh
+. /lib/qos/queue.sh
+. /lib/qos/shaper.sh
 . /lib/qos/airoha.sh
 
 get_rate_per_queue() {
@@ -22,6 +23,13 @@ get_burst_size_per_queue() {
 	echo "0"
 }
 
+# marking value be decimal for linux target as it uses set-mark whereas other
+# targets uses set-xmark, hence this function can't make it common
+ip_rule_get_converted_tos() {
+	con_tos=$(printf %x $1)
+	echo $con_tos
+}
+
 configure_qos() {
     # queue configuration is being done after shaper configuration,
     # If port shapingrate configuration on DISC device is called after queue configuration then

qosmngr/files/broadcom/lib/qos/qos.sh

@@ -176,6 +176,17 @@ handle_queue() {
 	Q_COUNT=$((Q_COUNT + 1))
 }
 
+iptables_set_traffic_class() {
+	IP_RULE="$IP_RULE -j MARK --set-xmark 0x$1/0x$1"
+}
+
+# marking value be decimal for linux target as it uses set-mark whereas other
+# targets uses set-xmark, hence this function can't make it common
+ip_rule_get_converted_tos() {
+	con_tos=$(printf %x $1)
+	echo $con_tos
+}
+
 ebt_match_ipv6_dscp() {
 	#when ethertype is not configured by user then both proto rules of ipv4
 	#and ipv6 to be installed so update BR6_RULE string as well otherwise

qosmngr/files/common/lib/qos/ip_rule.sh

@@ -1,52 +1,65 @@
 #!/bin/sh
 # add ip rule from qos uci
 
-IP_RULE=""
+FWD_POLICY=""
 
 init_ip_rule() {
-        IP_RULE=""
+        FWD_POLICY=""
 }
 
 ip_rule_match_inif() {
-        IP_RULE="$IP_RULE iif $1"
+        FWD_POLICY="$FWD_POLICY iif $1"
 }
 
 ip_rule_match_proto() {
-        IP_RULE="$IP_RULE ipproto $1"
+        FWD_POLICY="$FWD_POLICY ipproto $1"
 }
 
 ip_rule_match_dest_port() {
-        IP_RULE="$IP_RULE dport $1"
+        FWD_POLICY="$FWD_POLICY dport $1"
 }
 
 ip_rule_match_src_port() {
-        IP_RULE="$IP_RULE sport $1"
+        FWD_POLICY="$FWD_POLICY sport $1"
 }
 
 ip_rule_match_dest_ip() {
-        IP_RULE="$IP_RULE to $1"
+        FWD_POLICY="$FWD_POLICY to $1"
 }
 
 ip_rule_match_src_ip() {
-        IP_RULE="$IP_RULE from $1"
+        FWD_POLICY="$FWD_POLICY from $1"
 }
 
 ip_rule_match_dest_port_range() {
-        IP_RULE="$IP_RULE dport $1-$2"
+        FWD_POLICY="$FWD_POLICY dport $1-$2"
 }
 
 ip_rule_match_src_port_range() {
-        IP_RULE="$IP_RULE sport $1-$2"
-}
-
-ip_rule_match_tos() {
-        dscp_filter=$1
-        tos_val=$((dscp_filter<<2))
-        IP_RULE="$IP_RULE tos 0x$tos_val"
+        FWD_POLICY="$FWD_POLICY sport $1-$2"
 }
 
 ip_rule_match_fwmark() {
-        IP_RULE="$IP_RULE fwmark $1"
+        FWD_POLICY="$FWD_POLICY fwmark $1"
+}
+
+ip_rule_handle_match_tos() {
+	local dscp="$2"
+	local IPTOS_LOWDELAY="0x10"
+	local tos_val="$((dscp<<2))"
+
+	# ip rule not accept beyond 0x10, to handle further value mark the tos
+	# value through iptable and route with that marked value by fwmark
+	# in ip rule
+	if [ "$((tos_val))" -gt "$((IPTOS_LOWDELAY))" ]; then
+		handle_iptables_rules $1 $(ip_rule_get_converted_tos $tos_val)
+		ip_rule_match_fwmark  $(printf 0x%x $tos_val)
+	else
+		FWD_POLICY="$FWD_POLICY tos $(printf %x $tos_val)"
+		if [ -n "$3" ]; then
+			ip_rule_match_fwmark  $3
+		fi
+	fi
 }
 
 handle_ip_rule() {
@@ -60,7 +73,7 @@ handle_ip_rule() {
 	config_get src_ip "$cid" "src_ip"
 	config_get ifname "$cid" "ifname"
 	config_get proto "$cid" "proto"
-	config_get tos "$cid" "dscp_filter"
+	config_get dscp "$cid" "dscp_filter"
 	config_get fwmark "$cid" "traffic_class"
 	config_get dest_port "$cid" "dest_port"
 	config_get dest_port_range "$cid" "dest_port_range"
@@ -92,14 +105,20 @@ handle_ip_rule() {
 		ip_rule_match_src_port_range $src_port $src_port_range
 	fi
 
-	[ -n "$tos" ] && ip_rule_match_tos $tos
-
-	[ -n "$fwmark" ] && ip_rule_match_fwmark  $fwmark
+	if [ -n "$dscp" ]; then
+		# If tos and fwmark configured then fwmark be igroned/skipped
+		# in the case of tos value greater than 0x10 and if tos value
+	        # less than 0x10 then both tos and fwmark then both configuration
+		#considered/applied for ip rule.
+		ip_rule_handle_match_tos $cid $dscp $fwmark
+	elif [ -n "$fwmark" ]; then
+		ip_rule_match_fwmark  $fwmark
+	fi
 
 	# forming full ip rule
-	if [ -n "$IP_RULE" ]; then
-		echo "ip rule add $IP_RULE table $fwding_policy" >> /tmp/qos/classify.iprule
-		echo "ip rule del $IP_RULE table $fwding_policy" >> /tmp/qos/classify.del_iprule
+	if [ -n "$FWD_POLICY" ]; then
+		echo "ip rule add $FWD_POLICY table $fwding_policy" >> /tmp/qos/classify.iprule
+		echo "ip rule del $FWD_POLICY table $fwding_policy" >> /tmp/qos/classify.del_iprule
 	fi
 }
 

qosmngr/files/common/lib/qos/iptables.sh

@@ -55,10 +55,6 @@ iptables_set_dscp_mark() {
     IP_RULE="$IP_RULE -j DSCP --set-dscp $1"
 }
 
-iptables_set_traffic_class() {
-    IP_RULE="$IP_RULE -j MARK --set-xmark 0x${1}0/0xF0"
-}
-
 append_rule_to_mangle_table() {
     if [ "$2" == 4 ]; then
         echo "iptables -w -t mangle -A $1 $IP_RULE"  >> /tmp/qos/classify.iptables
@@ -74,10 +70,18 @@ handle_iptables_rules() {
     local cid="$1"
     local ip_version=0
     local is_l3_rule=0
+    traffic_class=$2
 
     init_iptables_rule
+
+    # If traffic class non empty/zero then function call for handling fowrwarding
+    # policy in the case of tos greater than 0x10.
+    # In this case, traffic class should not be read from config and use value in arg
+    if [ -z "$traffic_class" ]; then
+	    config_get traffic_class "$cid" "traffic_class"
+    fi
+
     config_get proto "$cid" "proto"
-    config_get traffic_class "$cid" "traffic_class"
     config_get dscp_mark "$cid" "dscp_mark"
     config_get dscp_filter "$cid" "dscp_filter"
     config_get dest_port "$cid" "dest_port"

qosmngr/files/linux/lib/qos/qos.sh

@@ -146,11 +146,21 @@ handle_queue() {
 		else
 			tc class add dev $port parent ${root}: classid ${root}:$order cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $priority  avpkt 1500 bounded isolated
 		fi
-		tc filter add dev $port parent ${root}:0 prio $order handle $order fw classid ${root}:$order
+		tc filter add dev $port parent ${root}:0 prio $order u32 match mark $order 0xf flowid ${root}:$order
 	fi
 	Q_COUNT=$((Q_COUNT + 1))
 }
 
+iptables_set_traffic_class() {
+	IP_RULE="$IP_RULE -j MARK --set-mark $1"
+}
+
+# marking value be decimal for linux target as it uses set-mark whereas other
+# targets uses set-xmark, hence this function can't make it common
+ip_rule_get_converted_tos() {
+	echo $1
+}
+
 ebt_match_ipv6_dscp() {
 	#when ethertype is not configured by user then both proto rules of ipv4
 	#and ipv6 to be installed so update BR6_RULE string as well otherwise

quickjs-websocket/Makefile

@@ -38,7 +38,7 @@ define Package/quickjs-websocket
   CATEGORY:=Libraries
   TITLE:=WebSocket API for QuickJS
   MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
-  DEPENDS:=+quickjs +libwebsockets
+  DEPENDS:=+quickjs +libwebsockets-openssl
 endef
 
 define Package/quickjs-websocket/description

sulu/sulu-base/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu-base
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.2.5
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu.git
-PKG_SOURCE_VERSION:=624710be04dcdba5434840c539518d22a18e537a
+PKG_SOURCE_VERSION:=2964b4263ee25fe16a0a74e833e269889dc8375f
 PKG_MIRROR_HASH:=skip
 
 SULU_MOD:=core

sulu/sulu-builder/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu-builder
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.2.5
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-builder.git
-PKG_SOURCE_VERSION:=c50a4a74376a1f3d1f14eb1476fee4e328f3cf90
+PKG_SOURCE_VERSION:=046bb209b4650564cc07d288112f3eb367aabca2
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_BUILD_DIR:=$(BUILD_DIR)/sulu-$(PKG_VERSION)/sulu-builder-$(PKG_SOURCE_VERSION)

sulu/sulu-builder/files/etc/config/sulu

@@ -1,4 +1,5 @@
 config global 'global'
 	option role_based_access '1'
+	option SessionMode 'Require'
 	list user 'admin'
 	list user 'user'

sulu/sulu-builder/files/etc/sulu/nginx.locations

@@ -8,7 +8,7 @@ location /sitemap.xml {
 	return 200 "User-agent: *\nDisallow: /\n";
 }
 
-location /ws {
+location /wss {
 	proxy_pass_request_headers      on;
 	proxy_cache        off;
 	proxy_http_version 1.1;
@@ -29,13 +29,11 @@ location /ws {
 
 location / {
 	autoindex on;
-	expires -1;
 
 	if ($request_method = 'OPTIONS') {
 		add_header 'Access-Control-Allow-Origin' '*';
 		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';
 		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,Content-Type,Range';
-		add_header Cache-Control 'no-store, no-cache, must-revalidate, proxy-revalidate, max-age=0';
 		add_header 'Content-Type' 'text/plain; charset=utf-8';
 		add_header 'Content-Length' 0;
 		return 204;
@@ -45,6 +43,7 @@ location / {
 		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS' always;
 		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,Content-Type,Range' always;
 		add_header 'Access-Control-Expose-Headers' 'Content-Length,Content-Range' always;
-		add_header Cache-Control 'no-store, no-cache, must-revalidate, proxy-revalidate, max-age=0';
 	}
+	expires -1;
+	add_header Cache-Control 'no-store, no-cache, must-revalidate, proxy-revalidate, max-age=0';
 }

sulu/sulu-builder/files/etc/sulu/sulu.sh

@@ -53,6 +53,11 @@ function _get_sulu_root()
 	echo "${root:-/sulu}"
 }
 
+function _get_sulu_session_mode()
+{
+	echo "$(uci -q get sulu.global.SessionMode)"
+}
+
 function _get_usp_upstream_port()
 {
 	local port
@@ -94,10 +99,11 @@ function update_nginx_template()
 
 function generate_sulu_conn_config()
 {
-	local rbac users SCONFIG
+	local rbac users SCONFIG session
 
 	rbac="${1}"
 	users="$(_get_sulu_users)"
+	session="$(_get_sulu_session_mode)"
 	SCONFIG="$(_get_sulu_root)/config/connectionConfig.json"
 
 	json_init;
@@ -110,7 +116,12 @@ function generate_sulu_conn_config()
 		json_add_object 'rbac';
 		json_add_string 'toId' "$(_get_endpoint_id)";
 		json_add_int 'port' "$(_get_sulu_tls_port)";
-		json_add_string 'path' "/ws";
+		json_add_string 'path' "/wss";
+
+		if [ "${session}" = "Require" ]; then
+			json_add_boolean 'useSession' 1;
+		fi
+
 		json_add_string 'protocol' 'wss';
 			json_add_array 'auth';
 			json_close_array;
@@ -131,7 +142,7 @@ function generate_sulu_conn_config()
 		json_add_string 'fromId' 'proto::interop-usp-controller';
 		json_add_string 'toId' "$(_get_endpoint_id)";
 		json_add_int 'port' "$(_get_sulu_tls_port)";
-		json_add_string 'path' "/ws";
+		json_add_string 'path' "/wss";
 		json_add_string 'protocol' 'wss';
 		json_add_string 'publishEndpoint' "/usp/endpoint";
 		json_add_string 'subscribeEndpoint' "/usp/controller";
@@ -209,7 +220,7 @@ function _update_obuspa_config()
 
 function _remove_obuspa_config()
 {
-	local restart
+	local restart session
 
 	restart=0
 	if [ "$(uci_get obuspa localmqtt)" == "mqtt" ]; then
@@ -228,10 +239,11 @@ function _remove_obuspa_config()
 }
 
 function _update_obuspa_config_rbac() {
-	local agent users restart
+	local agent users restart session
 
 	agent="$(_get_agent_id)"
 	users="$(_get_sulu_users)"
+	session="$(_get_sulu_session_mode)"
 	restart=0
 
 	for f in ${users}; do
@@ -268,6 +280,12 @@ function _update_obuspa_config_rbac() {
 			uci_set obuspa ${sec} assigned_role_name "$f"
 			restart=1
 		fi
+
+		obMode="$(uci_get obuspa ${sec} SessionMode)"
+		if [ "${session}" != "${obMode}" ]; then
+			uci_set obuspa ${sec} SessionMode "${session}"
+			restart=1
+		fi
 	done
 	if [ -f "/etc/sulu/roles.json" ]; then
 		uci_set obuspa global role_file "/etc/sulu/roles.json"

sulu/sulu-lcm/Makefile

@@ -4,11 +4,11 @@
 
 include $(TOPDIR)/rules.mk
 PKG_NAME:=sulu-lcm
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.2.4
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-lcm.git
-PKG_SOURCE_VERSION:=29515d3a3031d528cb603a8931156bf617fee885
+PKG_SOURCE_VERSION:=46975426ffa53ffcc3b0d9e9160f6b3d4b6d82fd
 PKG_MIRROR_HASH:=skip
 
 SULU_PLUGIN_INSTALL:=1

sulu/sulu-multi-ap/Makefile

@@ -4,11 +4,11 @@
 
 include $(TOPDIR)/rules.mk
 PKG_NAME:=sulu-multi-ap
-PKG_VERSION:=2.0.10
+PKG_VERSION:=2.2.4
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-multi-ap.git
-PKG_SOURCE_VERSION:=9f8143ea1dd4ac26b756268bdf03dc518c49b483
+PKG_SOURCE_VERSION:=d77f19d8d964c9ecf8ab6d2cc3c8ddc369135d7e
 PKG_MIRROR_HASH:=skip
 
 include ../sulu-builder/sulu.mk

sulu/sulu-parental-control/Makefile

@@ -4,11 +4,11 @@
 
 include $(TOPDIR)/rules.mk
 PKG_NAME:=sulu-parental-control
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.2.3
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-parental-control.git
-PKG_SOURCE_VERSION:=9f460d0851c52a433ec5fef079e6105b5ebeb225
+PKG_SOURCE_VERSION:=27f3859e30efbbed211c033f923f35974b3619fd
 PKG_MIRROR_HASH:=skip
 
 include ../sulu-builder/sulu.mk

swmodd/Config.in

@@ -1,53 +1,83 @@
-menu "Configuration"
+config SWMODD_REGISTRY_PULL_SUPPORT
+	bool "Add support to pull images from container image registries (i.e: docker.io, quay.io)"
 	depends on PACKAGE_swmodd
+	default n
+	select PACKAGE_skopeo
+	select PACKAGE_umoci
 
-	config SWMODD_LXC_SUPPORT
-		bool "Handles LXC based containers"
-		default y
+config SWMODD_LXC_SUPPORT
+	bool "Handles LXC based containers"
+	depends on PACKAGE_swmodd
+	default y
+	select PACKAGE_lxc
+	select PACKAGE_lxc-attach
+	select PACKAGE_lxc-auto
+	select PACKAGE_lxc-cgroup
+	select PACKAGE_lxc-checkconfig
+	select PACKAGE_lxc-common
+	select PACKAGE_lxc-config
+	select PACKAGE_lxc-configs
+	select PACKAGE_lxc-console
+	select PACKAGE_lxc-create
+	select PACKAGE_lxc-destroy
+	select PACKAGE_lxc-execute
+	select PACKAGE_lxc-freeze
+	select PACKAGE_lxc-hooks
+	select PACKAGE_lxc-info
+	select PACKAGE_lxc-init
+	select PACKAGE_lxc-ls
+	select PACKAGE_lxc-device
+	select PACKAGE_lxc-start
+	select PACKAGE_lxc-stop
+	select PACKAGE_lxc-templates
+	select PACKAGE_lxc-top
+	select PACKAGE_lxc-unfreeze
+	select PACKAGE_lxc-unprivileged
+	select PACKAGE_lxc-unshare
+	select PACKAGE_lxc-user-nic
+	select PACKAGE_lxc-usernsexec
+	select PACKAGE_lxc-wait
 
-	config SWMODD_OCI_SUPPORT
-		bool "Handles OCI containers"
-		default y
-		depends on PACKAGE_swmodd
-		select PACKAGE_crun
+config SWMODD_OCI_SUPPORT
+	bool "Handles OCI containers"
+	depends on PACKAGE_swmodd
+	default y
+	select PACKAGE_crun
 
-	config SWMODD_REGISTRY_PULL_SUPPORT
-		bool "Add support to pull images from container image registries (i.e: docker.io, quay.io)"
-		default n
-		depends on PACKAGE_swmodd
-		select PACKAGE_skopeo
-		select PACKAGE_umoci
+config SWMODD_KERNEL_OPTIONS
+	bool "Enable kernel support for LXC and OCI containers"
+	depends on PACKAGE_swmodd
+	default y
+	select LXC_KERNEL_OPTIONS
+	select LXC_BUSYBOX_OPTIONS
+	select LXC_SECCOMP
+	select LXC_NETWORKING
+	select KERNEL_CGROUPS
+	select KERNEL_CGROUP_SCHED
+	select KERNEL_CGROUP_DEVICE
+	select KERNEL_CGROUP_FREEZER
+	select KERNEL_CGROUP_CPUACCT
+	select KERNEL_CGROUP_NET_PRIO
+	select KERNEL_NET_CLS_CGROUP
+	select KERNEL_NAMESPACES
+	select KERNEL_DEVPTS_MULTIPLE_INSTANCES
+	select KERNEL_POSIX_MQUEUE
+	select KERNEL_FAIR_GROUP_SCHED
+	select KERNEL_RT_GROUP_SCHED
+	select KERNEL_MEMCG
+	select KERNEL_MEMCG_KMEM
+	select KERNEL_CPUSETS
+	select PACKAGE_kmod-ikconfig
+	help
+	  Select needed kernel options for LXC and CRUN related utilities. Options
+	  include cgroups, namespaces and other miscellaneous options. These
+	  options unfortunately can not be installed as a module.
 
-	config SWMODD_KERNEL_OPTIONS
-		bool "Enable kernel support for LXC and OCI containers"
-		default y
-		select KERNEL_CGROUPS
-		select KERNEL_CGROUP_SCHED
-		select KERNEL_CGROUP_DEVICE
-		select KERNEL_CGROUP_FREEZER
-		select KERNEL_CGROUP_CPUACCT
-		select KERNEL_CGROUP_NET_PRIO
-		select KERNEL_NET_CLS_CGROUP
-		select KERNEL_NAMESPACES
-		select KERNEL_DEVPTS_MULTIPLE_INSTANCES
-		select KERNEL_POSIX_MQUEUE
-		select KERNEL_FAIR_GROUP_SCHED
-		select KERNEL_RT_GROUP_SCHED
-		select KERNEL_MEMCG
-		select KERNEL_MEMCG_KMEM
-		select KERNEL_CPUSETS
-		select PACKAGE_kmod-ikconfig
-		help
-		  Select needed kernel options for LXC and CRUN related utilities. Options
-		  include cgroups, namespaces and other miscellaneous options. These
-		  options unfortunately can not be installed as a module.
-
-	config SWMODD_NETWORKING
-		bool "Enable networking support for LXC/OCI containers"
-		default y
-		select PACKAGE_kmod-veth
-		select PACKAGE_kmod-macvlan
-		help
-		  Enable "veth pair device" and "macvlan"
-
-endmenu
+config SWMODD_NETWORKING
+	bool "Enable networking support for LXC/OCI containers"
+	depends on PACKAGE_swmodd
+	default y
+	select PACKAGE_kmod-veth
+	select PACKAGE_kmod-macvlan
+	help
+	  Enable "veth pair device" and "macvlan"

swmodd/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.2.2
+PKG_VERSION:=2.3.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/lcm/swmodd.git
-PKG_SOURCE_VERSION:=db0805d7833a27afc9a42edd094209978f43e311
+PKG_SOURCE_VERSION:=d29418d26e630894079de73fae66bf04b5db0ab3
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -28,8 +28,9 @@ define Package/swmodd
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:= Software Modules Daemon
+  MENU:=1
   DEPENDS:=+libuci +libubox +ubus +libuuid +opkg +libcurl \
-	    +PACKAGE_liblxc:liblxc +@BUSYBOX_CONFIG_BUSYBOX \
+	    +PACKAGE_lxc:lxc +PACKAGE_liblxc:liblxc +@BUSYBOX_CONFIG_BUSYBOX \
 	    +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT +@BUSYBOX_CONFIG_SCRIPT \
 	    +swmodd-cgroup +jq +libbbfdm-api
 endef
@@ -54,12 +55,12 @@ TARGET_CFLAGS += \
 	-D_GNU_SOURCE \
 	-Wall -Werror
 
-ifeq ($(CONFIG_PACKAGE_crun),y)
+ifeq ($(CONFIG_SWMODD_OCI_SUPPORT),y)
 MAKE_FLAGS += \
 	SWMOD_CRUN="yes"
 endif
 
-ifeq ($(CONFIG_PACKAGE_liblxc),y)
+ifeq ($(CONFIG_SWMODD_LXC_SUPPORT),y)
 MAKE_FLAGS += \
 	SWMOD_LXC="yes"
 endif
@@ -76,23 +77,24 @@ define Package/swmodd/install
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/usr/share/swmodd/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) ./files/etc/init.d/swmodd $(1)/etc/init.d/swmodd
 	$(INSTALL_BIN) ./files/etc/config/swmodd $(1)/etc/config/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/swmodd $(1)/usr/sbin/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libswmodd.so $(1)/usr/lib/bbfdm/libswmodd.so
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/opkg_offline.sh $(1)/usr/share/swmodd/opkg_offline
+	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-bundle-path $(1)/etc/uci-defaults/01-fix-bundle-path
 ifeq ($(CONFIG_PACKAGE_liblxc),y)
 	$(INSTALL_DIR) $(1)/usr/share/lxc/templates/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/templates/lxc-iopsys $(1)/usr/share/lxc/templates/lxc-iopsys
+	$(INSTALL_BIN) ./files/etc/uci-defaults/02-migrate-lxc $(1)/etc/uci-defaults/02-migrate-lxc
 endif
 ifeq ($(CONFIG_PACKAGE_crun),y)
 	$(INSTALL_DIR) $(1)/etc/swmodd
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) ./files/etc/swmodd/run.sh $(1)/etc/swmodd/run.sh
 	$(INSTALL_BIN) ./files/etc/init.d/crun $(1)/etc/init.d/crun
 	$(INSTALL_BIN) ./files/etc/config/crun $(1)/etc/config/crun
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/crun_create $(1)/usr/sbin/crun_create
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-bundle-path $(1)/etc/uci-defaults/01-fix-bundle-path
 endif
 endef
 

swmodd/files/etc/init.d/crun

@@ -14,6 +14,34 @@ is_container_running() {
 	return $?
 }
 
+
+configure_lxc_container() {
+	local requested_state name ctype du_status BUNDLE
+
+	ctype="${1}"
+	name="${2}"
+	requested_state="${3}"
+	du_state="${4}"
+	BUNDLE="${5}"
+
+	if [ "${ctype}" != "lxc" ]; then
+		return 0;
+	fi
+
+	if [ "${du_status}" = "Uninstalling" ]; then
+		lxc-stop -q -k "${name}"
+		if [ -d "${BUNDLE:?}/${name:?}" ]; then
+			rm -rf "${BUNDLE:?}/${name:?}"
+		fi
+	fi
+
+	if [ "${requested_state}" = "Idle" ]; then
+		lxc-stop -q -k "${name}"
+	elif [ "${requested_state}" = "Active" ]; then
+		lxc-start -q "${name}" >/dev/null 2>&1
+	fi
+}
+
 configure_crun_container() {
 	local name type autostart du_status requested_state url username password
 	local BRIDGE BUNDLE BOOT
@@ -22,6 +50,7 @@ configure_crun_container() {
 	BUNDLE="${2}"
 	BRIDGE="${3}"
 	BOOT="${4}"
+	TIMEOUT="${5}"
 
 	config_get name "${1}" name ""
 	config_get type "${1}" type ""
@@ -37,6 +66,7 @@ configure_crun_container() {
 	fi
 
 	if [ "${type}" != "crun" ]; then
+		configure_lxc_container "${type}" "${name}" "${requested_state}" "${du_status}" "${BUNDLE}"
 		return 0;
 	fi
 
@@ -46,7 +76,7 @@ configure_crun_container() {
 		uci_set ocicontainer "${1}" du_status Installing_start
 		uci_set ocicontainer "${1}" username ""
 		uci_set ocicontainer "${1}" password ""
-		result=$(${RUNNER} -b "${BUNDLE}" -n "${name}" -r "${url}" -l "${username}:${password}")
+		result=$(${RUNNER} -b "${BUNDLE}" -n "${name}" -r "${url}" -l "${username}:${password}" -t "${TIMEOUT}")
 		if [ "$?" -eq 0 ]; then
 			result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_description")
 			if [ "${result}" != "null" ]; then
@@ -190,6 +220,7 @@ start_service() {
 	config_load swmodd
 	config_get bundle globals oci_bundle_root ""
 	config_get bridge globals lan_bridge "br-lan"
+	config_get timeout globals oci_pull_timeout "10"
 
 	if [ -z "${bundle}" ] || [ -z "${bridge}" ]; then
 		log "Empty bundle path or bridge"
@@ -199,7 +230,7 @@ start_service() {
 	if [ -f "${bundle}/ocicontainer" ]; then
 		UCI_CONFIG_DIR="${bundle}"
 		config_load ocicontainer
-		config_foreach configure_crun_container du_eu_assoc "${bundle}" "${bridge}" "${boot}"
+		config_foreach configure_crun_container du_eu_assoc "${bundle}" "${bridge}" "${boot}" "${timeout}"
 		uci_commit ocicontainer
 
 		# Add a timer for DuStateChange!

swmodd/files/etc/init.d/swmodd

@@ -6,6 +6,11 @@ STOP=01
 USE_PROCD=1
 PROG=/usr/sbin/swmodd
 
+log()
+{
+        logger -t swmodd.init "$*"
+}
+
 validate_globals_section()
 {
 	uci_validate_section swmodd swmodd "globals" \
@@ -18,15 +23,23 @@ validate_globals_section()
 }
 
 start_lxc_container() {
+	local root
+
 	config_get name "${1}" name ""
 	config_get type "${1}" type ""
 	config_get autostart "${1}" autostart "0"
 	config_get timeout "${1}" timeout "300"
+	root="${2}"
 
 	if [ -z "${name}" ] || [ -z "${type}" ]; then
 		return 0;
 	fi
 
+	# workaround to install lxc container with installdu and autostart them
+	if [ -f "${root}/$name/config" ]; then
+		type=lxc
+	fi
+
 	if [ "${type}" != "lxc" ]; then
 		return 0;
 	fi
@@ -39,12 +52,12 @@ start_lxc_container() {
 	if [ "${autostart}" == "0" ]; then
 		if [ "${state}" == "RUNNING" ]; then
 			# stop the container if running
-			lxc-stop -n "${name}" -t "${timeout}" &
+			lxc-stop -k -n "${name}" &
 			return 0;
 		elif [ "${state}" == "FROZEN" ]; then
 			# first unfreeze then stop
 			lxc-unfreeze -n "${name}"
-			lxc-stop -n "${name}" -t "${timeout}" &
+			lxc-stop -k -n "${name}" &
 			return 0;
 		fi
 	else
@@ -59,6 +72,12 @@ start_lxc_container() {
 	fi
 }
 
+stop_lxc_containers() {
+	for f in `lxc-ls`; do
+		lxc-stop -k -n $f >/dev/null 2>&1;
+	done
+}
+
 start_service() {
 	local enabled debug log_level sock lxc_bundle_root oci_bundle_root
 
@@ -70,9 +89,15 @@ start_service() {
 
 	[ "${enabled}" -eq 0 ] && return 0
 
-	# Create the bundle paths if not present
-	[ -n "${lxc_bundle_root}" ] && mkdir -p "${lxc_bundle_root}"
-	[ -n "${oci_bundle_root}" ] && mkdir -p "${oci_bundle_root}"
+        if [ ! -d "${lxc_bundle_root}" ]; then
+                log "# Not staring lxc [${lxc_bundle_root}] not present/defined"
+                return 1
+        fi
+
+        if [ ! -d "${oci_bundle_root}" ]; then
+                log "# Not staring oci [${oci_bundle_root}] not present/defined"
+                return 1
+        fi
 
 	procd_open_instance swmodd
 	procd_set_param command ${PROG}
@@ -94,8 +119,17 @@ start_service() {
 	if [ -f "${lxc_bundle_root}/lxccontainer" ]; then
 		UCI_CONFIG_DIR="${lxc_bundle_root}"
 		config_load lxccontainer
-		config_foreach start_lxc_container container
+		config_foreach start_lxc_container container ${lxc_bundle_root}
 	fi
+	if [ -f "${oci_bundle_root}/ocicontainer" ]; then
+		UCI_CONFIG_DIR="${oci_bundle_root}"
+		config_load ocicontainer
+		config_foreach start_lxc_container du_eu_assoc ${oci_bundle_root}
+	fi
+}
+
+stop_service() {
+	stop_lxc_containers
 }
 
 reload_service() {

swmodd/files/etc/swmodd/run.sh

@@ -164,14 +164,15 @@ pull_image_from_registry() {
 		OPTS="--src-creds ${LOGIN}"
 		INSPECT_OPT="--creds ${LOGIN}"
 	fi
-	if ! skopeo --command-timeout 4m copy ${OPTS} ${REGURL} oci:${NAME}_tmp:latest >/dev/null 2>&1; then
-		log "Failed to download image"
+
+	if ! skopeo --command-timeout ${TIMEOUT:-10}m copy ${OPTS} ${REGURL} oci:${NAME}_tmp:latest >/dev/null 2>&1; then
+		log "Failed to download image: $?"
 		cd -
 		rm -rf "${temp}"
 		exit 1
 	fi
 	if ! umoci unpack --image ${NAME}_tmp:latest ${NAME} >/dev/null 2>&1; then
-		log "Failed to unpack image"
+		log "Failed to unpack image: $?"
 		cd -
 		rm -rf "${temp}"
 		exit 1
@@ -211,7 +212,7 @@ pull_image_from_registry() {
 clean=0
 net_update=0
 update_json=0
-while getopts b:n:i:r:l:cuU options
+while getopts b:n:i:r:l:t:cuU options
 do
 	case "${options}" in
 		b) BUNDLE=${OPTARG};;
@@ -219,6 +220,7 @@ do
 		i) BRIDGE=${OPTARG};;
 		r) REGURL=${OPTARG};;
 		l) LOGIN=${OPTARG};;
+		t) TIMEOUT=${OPTARG};;
 		c) clean=1;;
 		u) net_update=1;;
 		U) update_json=1;;

swmodd/files/etc/uci-defaults/01-fix-bundle-path

@@ -21,23 +21,18 @@ if [ -n "${lxc_bundle}" ]; then
 elif [ -n "${lxc}" ]; then
 	# if lxc_bundle_root not define in swmodd, update it with lxc path
 	uci_set swmodd globals lxc_bundle_root ${lxc}
-	uci_commit
 else
 	mkdir -p /etc/lxc
 	echo "lxc.lxcpath = /srv/" > /etc/lxc/lxc.conf
 	uci_set swmodd globals lxc_bundle_root "/srv/"
-	uci_commit
 fi
 
 if [ -z "${oci_bundle}" ] && [ -n "${lxc_bundle}" ]; then
 	# if oci_bundle_root not defined in swmodd, update it with lxc_bundle_root if defined
 	uci_set swmodd globals oci_bundle_root ${lxc_bundle}
-	uci_commit
 elif [ -z "${oci_bundle}" ] && [ -n "${lxc}" ]; then
 	# if oci_bundle_root not defined in swmodd, update it with lxc path
 	uci_set swmodd globals oci_bundle_root ${lxc}
-	uci_commit
 elif [ -z "${oci_bundle}" ]; then
 	uci_set swmodd globals oci_bundle_root "/srv/"
-	uci_commit
 fi

swmodd/files/etc/uci-defaults/02-migrate-lxc

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+config_change=0
+
+migrate_lxc() {
+	config_get name "${1}" name ""
+
+	if [ -z "${name}" ]; then
+		return 0;
+	fi
+
+	# Now lets check if already present in lxccontainer
+	exist=$(uci -q -c "${2}" show lxccontainer | grep ".name='$name'")
+	if [ -z "${exist}" ]; then
+		# Not present, need to migrate
+		sec=$(uci -q -c "${2}" add lxccontainer container)
+		if [ -n "${sec}" ]; then
+			uci -q -c "${2}" set lxccontainer."${sec}".name="${name}"
+			uci -q -c "${2}" set lxccontainer."${sec}".type='lxc'
+			uci -q -c "${2}" set lxccontainer."${sec}".autostart='1'
+			uci -q -c "${2}" set lxccontainer."${sec}".timeout='300'
+			config_change=1			
+		fi
+	fi
+}
+
+config_load swmodd
+config_get lxc_bundle globals lxc_bundle_root ""
+
+if [ -z "${lxc_bundle}" ]; then
+	return 0
+fi
+
+if [ ! -d "${lxc_bundle}" ]; then
+	return 0
+fi
+
+touch "${lxc_bundle}"/lxccontainer
+
+config_load lxc-auto
+config_foreach migrate_lxc container "${lxc_bundle}"
+
+if [ $config_change -eq 1 ]; then
+	uci -q -c "${lxc_bundle}" commit lxccontainer
+fi

urlfilter/Makefile

@@ -6,13 +6,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=urlfilter
-PKG_VERSION:=1.1.5
+PKG_VERSION:=1.1.7
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/urlfilter.git
-PKG_SOURCE_VERSION:=e55a2c2c7c992eb5071e82734bdc8850b71b02e0
+PKG_SOURCE_VERSION:=a726e4ce9fa3322e135cb0dd961f31b4fd7ae22a
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

urlfilter/files/etc/bbfdm/json/urlfilter.json

@@ -163,7 +163,7 @@
 								"type": "profile"
 							},
 							"option": {
-								"name": "@Name"
+								"name": "name"
 							}
 						}
 					}

usermngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=usermngr
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.1.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/usermngr.git
-PKG_SOURCE_VERSION:=467e30c6a41ce4b133284283a7a17d763e6921ff
+PKG_SOURCE_VERSION:=2285d198a535e0dc05f5fb78e80442d7a2ccf5f8
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

usp-js/Makefile

@@ -6,11 +6,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=usp-js
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.2.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/usp-js.git
-PKG_SOURCE_VERSION:=0dde613f8e84e751ec9f5514301c7d58172e31a5
+PKG_SOURCE_VERSION:=d3fe500133074ac2a2475c4a1b31a28effbc6431
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -19,33 +19,26 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/usp-js/default
+define Package/usp-js
   SECTION:=libs
   CATEGORY:=Libraries
   TITLE:=A JS library for USP(TR369) protocol
+  DEPENDS:=+quickjs +quickjs-websocket
 endef
 
 define Package/usp-js/description
   A JS library to provide USP(TR369) protocol functionality for an usp controller.
 endef
 
-define Package/usp-js-quickjs
-  $(Package/usp-js/default)
-  TITLE += (QuickJS)
-  DEPENDS:=+quickjs +quickjs-websocket
-  VARIANT:=quickjs
-  DEFAULT_VARIANT:=1
-endef
-
 define Build/Compile
 	cd $(PKG_BUILD_DIR) && yarn install && yarn qjs
 endef
 
-define Package/usp-js-quickjs/install
+define Package/usp-js/install
 	$(INSTALL_DIR) $(1)/usr/lib/usp-js
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) $(PKG_BUILD_DIR)/qjs/* $(1)/usr/lib/usp-js/
 	$(CP) ./files/etc/* $(1)/etc/
 endef
 
-$(eval $(call BuildPackage,usp-js-quickjs))
+$(eval $(call BuildPackage,usp-js))

voicemngr/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=voicemngr
 PKG_RELEASE:=1
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.4
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -19,7 +19,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=851ef04d335975172cd3b1399f73fab25d7b589e
+PKG_SOURCE_VERSION:=11b27a3bbf80f87ddfe10ed984d2945655ce3ba1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

wifimngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifimngr
-PKG_VERSION:=16.0.2
+PKG_VERSION:=16.0.6
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=67bf1d5f51ca12cf4aa12c765aec76baf2f824ec
+PKG_SOURCE_VERSION:=93b34813aa41220e57bbec8c13c7a68d390c7a61
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

wifimngr/files/etc/hotplug.d/button/05-wifi

@@ -1,137 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-MAPFILE="/var/run/multiap/multiap.backhaul"
-
-wifi_onoff() {
-	local devices="$(uci show wireless | grep '=wifi-device' | awk -F'[.,=]' '{print$2}')"
-	local wldisabled="0"
-
-	for dev in $devices; do
-		wldisabled="$(uci -q get wireless.$dev.disabled)"
-		wldisabled=${wldisabled:-0}
-		if [ "$wldisabled" == "1" ]; then
-			uci -q set wireless.$dev.disabled=0
-		else
-			uci -q set wireless.$dev.disabled=1
-		fi
-	done
-	uci commit wireless
-	killall -9 wifi 2>/dev/null
-	/sbin/wifi reload &
-}
-
-start_ap_wps() {
-	for ap in $(ubus list |grep hostapd.)
-	do
-		logger -t button "start WPS PBC on $ap"
-		ubus call $ap wps_start
-	done
-}
-
-supp_status() {
-	wpasupp=$1
-	ul_type=""
-
-	ifname="$(echo $wpasupp | cut -d . -f 2)"
-
-        # First check if bsta already configured
-	for idx in $(seq 0 10)
-	do
-		sec_ifname=$(uci get wireless.@wifi-iface[$idx].ifname 2>/dev/null)
-		if [ "$sec_ifname" = "$ifname" ]; then
-			logger -t button "found wifi-iface idx $idx"
-			sec_ssid=$(uci get wireless.@wifi-iface[$idx].ssid 2>/dev/null)
-			sec_key=$(uci get wireless.@wifi-iface[$idx].key 2>/dev/null)
-			if [ -n "$sec_key" ]; then
-				echo "CONFIGURED"
-				return
-			fi
-		fi
-	done
-
-	# not configured, but could be still connected
-	status=$(wpa_cli -i $ifname status |grep wpa_state |cut -d = -f2 2>/dev/null)
-	logger -t button "$ifname status $status"
-
-	if [ "$status" = "COMPLETED" ]; then
-		echo "CONFIGURED"
-		return
-	fi
-
-	if [ -f $MAPFILE ]; then
-		# check if uplink is eth
-		json_load "$(cat $MAPFILE)"
-		json_get_var ul_type "type"
-		json_cleanup
-	fi
-
-	if [ "$ul_type" = "eth" ]; then
-		echo "CONFIGURED"
-		return
-	fi
-
-	echo "UNCONFIGURED"
-}
-
-supp_configured() {
-	wpasupp=$1
-
-	for wpa in $wpasupp
-	do
-		logger -t button "WPS $wpa check if configured"
-		status=$(supp_status $wpa)
-		if [ "$status" = "CONFIGURED" ]; then
-			logger -t button "WPS $wpa CONFIGURED"
-			echo "CONFIGURED"
-			return
-		fi
-	done
-
-	echo "UNCONFIGURED"
-}
-
-supp_wps() {
-	wpasupp=$1
-
-	for wpa in $wpasupp
-	do
-		logger -t button "WPS $wpa start"
-		ubus -t 1 call $wpa wps_start '{"multi_ap":true}'
-	done
-}
-
-wps_button() {
-	logger -t button "WPS button is pressed"
-	wpasupp="$(ubus list wpa_supplicant.* 2>/dev/null)"
-
-	logger -t button "WPS checking: $wpasupp"
-	if [ -n "$wpasupp" ]; then
-		status=$(supp_configured "$wpasupp")
-		logger -t button "status $status"
-		if [ "$status" = "CONFIGURED" ]; then
-			start_ap_wps
-		else
-			supp_wps "$wpasupp"
-		fi
-	else
-		start_ap_wps
-	fi
-}
-
-case "$ACTION" in
-        add|register)
-		[ "wifibutton" == "$INTERFACE" ] && {
-			[ -e "/tmp/wps_active" ] && return
-			echo "WiFi button is pressed" > /dev/console
-			wifi_onoff
-		}
-		[ "wpsbutton" == "$INTERFACE" ] && {
-			[ -e "/tmp/wps_active" ] && return
-			wps_button
-		}
-        ;;
-esac
-