Rename etc/init.d/dect to etc/init.d/dectmngr

Also remove some files for USB DECT sound driver configuration

bbf/Config_bbfdm.in

@@ -1,7 +1,5 @@
 if PACKAGE_libbbfdm
 
-menu "Configuration"
-
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -26,12 +24,4 @@ config BBF_TR143
 	bool "Enable TR-143 Data Model Support"
 	default y
 
-config BBFDM_ENABLE_JSON_PLUGIN
-	bool "Enable json plugin to extend datamodel"
-	default n
-
-config BBFDM_ENABLE_DOTSO_PLUGIN
-	bool "Enable shared library plugin to extend datamodel"
-	default n
-endmenu
 endif

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.2.3
+PKG_VERSION:=4.1.2
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f1d14059f5cf1c75f7c3cdff8004d5850cd9ae72
+PKG_SOURCE_VERSION:=3034c1b324937fdccafa92e706e5986dc7a78df7
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -23,19 +23,19 @@ PKG_LICENSE_FILES:=LICENSE
 include $(INCLUDE_DIR)/package.mk
 
 define Package/libbbf_api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=BBF
   TITLE:=Library for libbbfdm API
   DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/libbbfdm
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=BBF
   TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libmbedtls +libcurl
 endef
 
 define Package/libbbfdm/config
@@ -57,9 +57,11 @@ define Build/Prepare
 endef
 endif
 
+TARGET_CFLAGS += -DBBF_VENDOR_LIST=\\\"$(CONFIG_BBF_VENDOR_LIST)\\\"
+TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
+
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror \
+	-D_GNU_SOURCE -D_AADJ
 
 ifeq ($(CONFIG_BBF_TR181),y)
 CONFIGURE_ARGS += \
@@ -81,56 +83,50 @@ CONFIGURE_ARGS += \
 	--enable-libopenssl
 endif
 
+ifeq ($(CONFIG_PACKAGE_libmbedtls),y)
+CONFIGURE_ARGS += \
+	--enable-libmbedtls
+endif
+
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
 CONFIGURE_ARGS += \
 	--enable-vendor-extension
 
 CONFIGURE_ARGS += \
-	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
-	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)"
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CONFIGURE_ARGS += \
-	--enable-json-plugin
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CONFIGURE_ARGS += \
-	--enable-shared-library
-endif
-
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
 define Package/libbbfdm/install
 	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
 	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 endef
 
 define Package/libbbfdm/prerm
 	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
+	rm -rf /etc/bbfdm/*
 	exit 0
 endef
 
 define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
 	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
 endef
 
 $(eval $(call BuildPackage,libbbf_api))

bulkdata/Makefile

@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.1
 
-PKG_SOURCE_VERSION:=b35e7862bc17fc11dc1f757c7b93900995a28633
+PKG_SOURCE_VERSION:=e4f39d1bf4678fc05b9d02e81b194c70719909e4
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
 

crun/Makefile

@@ -1,14 +1,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crun
-PKG_VERSION:=0.20
+PKG_VERSION:=0.18
 PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/containers/crun.git
-PKG_SOURCE_DATE:=2021-06-07
-PKG_SOURCE_VERSION:=8d6a8b5ab80461cfed19f020a36584af13c32038
-PKG_MIRROR_HASH:=9ca1f0e530b33ce8820bd03329eb6731c5050d6e7f35bd2463d9a81cc00382e0
+PKG_SOURCE_DATE:=2021-03-18
+PKG_SOURCE_VERSION:=496e81bdd69f117f10e4477e4204e4611a94b68f
+PKG_MIRROR_HASH:=26941b0d84bbeabeb5e982af48d131f55d0aa16f4a2f2ca3279a5c812cdeea8b
 
 PKG_BUILD_DEPENDS:=argp-standalone
 PKG_BUILD_PARALLEL:=1
@@ -74,7 +74,8 @@ define Package/crun/install
 endef
 
 define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/crun $(1)/usr/bin/
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcrun.* $(1)/usr/lib/
 endef
 

dectmngr/Makefile

@@ -8,17 +8,17 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.2.1
+PKG_VERSION:=3.0.12
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=8f777088767d3fe4d751ca36e166c96e7f6de4ab
+PKG_SOURCE_VERSION:=db155c063a9875026e573bbd292dec484fc3f103
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2
+ 	DEPENDS:= +libubox +ubus
 endef
 
 define Package/$(PKG_NAME)/description
@@ -47,19 +47,16 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += \
-	-Wall \
-	-I$(STAGING_DIR)/usr/include/libxml2
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
 	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,2 +0,0 @@
-config dect 'global'
-	option log_dect_cmbs '0'

dectmngr/files/etc/init.d/dectmngr

@@ -9,7 +9,6 @@ USE_PROCD=1
 NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
@@ -23,35 +22,17 @@ stop_and_wait_dectmngr() {
 }
 
 start_service() {
-	local opt_ext=
 	local rfpi=
-	local model_id=
-
+	local opt_rfpi=
 	test $(db get hw.board.hasDect) = "0" && return
 
 	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	# model_id=$(db -q get hw.board.dect_model_id)
-	# Setting model_id to 0x010203 is a workaround to reduce synchronisation time of some handset
-	# TODO: remove below line and uncomment the line above to get value from db when the problem is solved
-	model_id="01.02.03"
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] && opt_ext="$opt_ext -model $model_id"
-
-	config_load dect
-	config_get_bool log_dect_cmbs global log_dect_cmbs 0
+	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_rfpi="-rfpi $rfpi"
 
 	procd_open_instance
-	if [ $log_dect_cmbs -eq 0 ]; then
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command $PROG -comname ttyH0 $opt_ext
-		rm -f $LOG_PATH/*
-	else
-		echo "Starting dectmngr with cmbs logging enabled"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
-	fi
+	procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_rfpi
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
 	procd_set_param triggers asterisk
@@ -72,7 +53,7 @@ reload_service() {
 
 service_triggers()
 {
-	procd_add_reload_trigger asterisk dect
+	procd_add_reload_trigger asterisk
 }
 
 boot() {
@@ -80,7 +61,6 @@ boot() {
 	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
 

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dslmngr/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.1.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_VERSION:=d17c699c1fc9588303d6da35ac2250903bf17cd8
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.4.28
+PKG_VERSION:=6.2.12
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a6f80b4c7f3f9f6c8d8785516e83df4f12dcfc1b
+PKG_SOURCE_VERSION:=48b9abce9acace69a9b270ed4438b80434fc3446
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

easy-soc-libs/easy.mk

@@ -18,7 +18,6 @@ define Build/InstallDev/libeasy
 	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
 endef
 

easy-soc-libs/qos.mk

@@ -16,7 +16,7 @@ endef
 define Build/InstallDev/libqos
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/qos.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
 endef
 

endptmngr/Makefile

@@ -7,16 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
+PKG_VERSION:=0.4
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=1d4f1aafcb929e64597d226a710fd0c1b949ba08
+PKG_SOURCE_VERSION:=b94de01a4ff24bb4d31bb16b3be9e1b1859359dd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
 
 PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=LICENSE
@@ -30,8 +27,8 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504021
-export CONFIG_BCM_CHIP_ID
+export CONFIG_BRCM_SDK_VER_504002
+
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -50,12 +47,6 @@ define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ef46eb3be68ae1216d8699234f237fb2243289f1
+PKG_SOURCE_VERSION:=485a38bc4eaf2a54d080b8529d5130b2955626d1
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2

gryphon-led-module/Makefile

@@ -28,7 +28,6 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,21 +40,6 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	MODULES_SUBDIR:=lib/modules/4.19.183
-	KERNEL_CROSS:=$(CONFIG_BCM_TOOLCHAIN)/bin/$(CONFIG_BCM_TOOLTUPLE)
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		KERNEL_CROSS:=/opt/toolchains/crosstools-aarch64-gcc-9.2-linux-4.19-glibc-2.30-binutils-2.32/bin/aarch64-buildroot-linux-gnu-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
-
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -43,15 +43,10 @@
 static ssize_t get_led_color(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	/* [ln] todo: dummy implementation */
 	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
 
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
+	len = scnprintf(buf, PAGE_SIZE, "%d\n", 123);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
 		return -EIO;

icwmp/Config_cwmp.in

@@ -1,6 +1,5 @@
 if PACKAGE_icwmp
 
-menu "Configuration"
 choice
 	prompt "Select ACS sever"
 	default CWMP_ACS_MULTI
@@ -19,6 +18,6 @@ config CWMP_DEBUG
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
-endmenu
+
 endif
 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=8.2.9-2021-11-16
+PKG_VERSION:=7.0.1-2021-04-15
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=64310c6cf55128f555c354c1743c6814576db3a6
+PKG_SOURCE_VERSION:=f70cc81e5688e32aa82084faae5bc6ff710bb81b
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -29,6 +29,8 @@ PKG_CONFIG_DEPENDS:= \
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -55,8 +57,24 @@ endef
 endif
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+	-D_GNU_SOURCE -D_AADJ
+
+ifneq ($(CWMP_REVISION)_,_)
+ifneq ($(CWMP_REVISION),exported)
+ifneq ($(CWMP_REVISION),Unversioned directory)
+TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+endif
+endif
+endif
+
+TARGET_LDFLAGS += \
+	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
+
+CONFIGURE_ARGS += \
+	--with-uci-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubus-include-path=$(STAGING_DIR)/usr/include
 
 ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
 CONFIGURE_ARGS += \
@@ -81,20 +99,26 @@ endif
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
-	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
-	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/99-icwmp $(1)/etc/hotplug.d/iface/99-icwmp
-	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/
+	$(CP) ./files/* $(1)/
+endef
+
+define Package/$(PKG_NAME)/postinst
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Enabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd enable
+	fi
+	exit 0
+endef
+
+define Package/$(PKG_NAME)/prerm
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Disabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd disable
+	fi
+	exit 0
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/files/etc/config/cwmp

@@ -5,6 +5,7 @@ config acs 'acs'
 	option periodic_inform_enable 'true'
 	option periodic_inform_interval '1800'
 	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option ParameterKey ''
 	option dhcp_discovery 'enable'
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
@@ -29,6 +30,7 @@ config cpe 'cpe'
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option port '7547'
+	option ubus_socket '/var/run/ubus.sock'
 	option provisioning_code ''
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
@@ -38,7 +40,6 @@ config cpe 'cpe'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
-	option incoming_rule 'Port_Only'
 	
 config lwn 'lwn'
 	option enable '1'

icwmp/files/etc/firewall.cwmp

@@ -1,15 +1,6 @@
-#created by the icwmp package
-
-if [ ! -f "/var/state/cwmp" ]; then
-	exit 0;
-fi
-
-zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
-port=$(uci -q get cwmp.cpe.port)
-ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr [A-Z] [a-z])
-
+#created by the icwmp package 
+zone_name=""
+port=""
 if [ "$zone_name" = "" ]; then
 	exit 0
 elif [ "$zone_name" = "icwmp" ]; then
@@ -27,48 +18,4 @@ else
 	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
 	iptables -X zone_icwmp_input 2> /dev/null
 fi
-
-cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
-cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
-
-# default incoming rule is Port only
-if [ -z "${incoming_rule}" ]; then
-	incoming_rule="port_only"
-fi
-
-if [ "${incoming_rule}" = "ip_only" ]; then
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-elif [ "${incoming_rule}" = "port_only" ]; then
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-else
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-fi
-
-echo ${cmd}|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd}
-fi
-
-echo ${cmd6}|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd6}
-fi
-
-uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit cwmp
+#iptables -I FW_ZONE -p tcp -s ACS_ADDRESS --dport PORT -j ACCEPT --comment "Open ACS port"

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -2,7 +2,7 @@
 
 . /lib/functions/network.sh
 
-[ "$ACTION" == "ifup" -o "$ACTION" == "ifupdate" ] || exit 0
+[ "$ACTION" == "ifup" ] || exit 0
 
 [ -f /etc/config/cwmp ] || exit 0
 
@@ -23,7 +23,7 @@ handle_icwmp_restart() {
 
 	local ifname="$(uci -q get network.$INTERFACE.ifname)"
 	[ "${ifname:0:1}" == "@" ] && exit 0
-	
+
 	mkdir -p /tmp/ipv4
 
 	network_flush_cache
@@ -63,58 +63,11 @@ handle_icwmp_restart() {
 	network_get_device curdev $INTERFACE
 	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
 
-	if [ ! -f /var/state/cwmp ]
-	then
-		if [ -f /etc/icwmpd/cwmp ]
-		then
-			uci -c /etc/icwmpd delete cwmp.acs
-			uci -c /etc/icwmpd commit cwmp
-			cp /etc/icwmpd/cwmp /var/state/cwmp
-		else
-			touch /var/state/cwmp
-		fi
-	fi
-	
-	uci -q -c /var/state/ get cwmp.cpe
-	if [ "$?" -ne 0 ]; then
-		unnamedcpe=`uci -q -c /var/state/ add cwmp cpe`
-		uci -c /var/state/ -q rename cwmp.$unnamedcpe='cpe'
-	fi 
-	
-	local vendorspecinf=`ubus call network.interface.${defwan} status | jsonfilter -e "@.data.vendorspecinf"`
-	[ -n "$vendorspecinf" ] && {
-		local url=""
-		case $vendorspecinf in
-			http://*|https://*)
-					url="$vendorspecinf"
-				;;
-			*)
-				for optval in $vendorspecinf; do
-				        case $optval in
-				                1=*)
-				                        url="$(echo $optval | cut -d"=" -f2-)"
-				                ;;
-				        esac
-				done
-			;;
-		esac
-		if [ ! -f /var/state/cwmp ]; then
-			touch /var/state/cwmp
-		fi
-		uci -q -c /var/state/ get cwmp.acs
-		if [ "$?" -ne 0 ]; then
-			unnamed=`uci -q -c /var/state/ add cwmp acs`
-			uci -c /var/state/ -q rename cwmp.$unnamed='acs'
-		fi
-		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.dhcp_url="$url"
-		uci -c /var/state commit cwmp
-	}
-                
 	local prevopt43url=""
 	local curopt43url=""
 	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
 	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -c /var/state -q get cwmp.acs.dhcp_url)"
+	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
 	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
 
 	[ \
@@ -128,8 +81,6 @@ handle_icwmp_restart() {
 		[ -z "$prevopt43url" ] && exit 0
 	}
 
-	echo "Restarting icwmp"|logger -t cwmp.hotplug -p info
-
 	/etc/init.d/icwmpd reload &
 }
 

icwmp/files/etc/init.d/icwmpd

@@ -6,60 +6,121 @@ include /lib/network
 . /usr/share/libubox/jshn.sh
 
 START=99
-STOP=2
+STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-log() {
-	echo "${@}"|logger -t cwmp.init -p info
+EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
+
+validate_url() {
+	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
+	# Example: SCHEMA_LIST="http https"
+	SCHEMA_LIST="http"
+
+	for schema in $SCHEMA_LIST;	do
+		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
+		if [ "_$dest" != "_" ]; then
+			return 0
+		fi
+	done
+	return 1
+}
+
+get_acs_url() {
+	local default_acs="http://10.10.1.6:8000/openacs/acs"
+	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
+	local url="$(uci -q get cwmp.acs.url)"
+	local dhcp_url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
+
+	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
+		url="$dhcp_url"
+		echo "ACS URL from DHCP server: $url"
+		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
+	elif [ -n "$url" ];then
+		url="$(uci -q get cwmp.acs.url)"
+		echo "ACS URL from configuration: $url"
+	else
+		url="$default_acs"
+		echo "Using default ACS URL: $url"
+		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url"
+	fi
+
+	validate_url "$url"
+	if [ "$?" != "0" ];then
+		echo "Invalid ACS URL: $url"
+		exit 1
+	fi
 }
 
 enable_dhcp_option43() {
 	local wan=$1
+	local discovery=0
+	case $2 in
+		enable|1) discovery=1 ;;
+	esac
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local enabled
+	local newreqopts=
+	local baseopts=
 	local reqopts="$(uci -q get network.$wan.reqopts)"
 	local proto="$(uci -q get network.$wan.proto)"
-	local newreqopts=""
-	local option43_present=0
-
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
 	for ropt in $reqopts; do
 		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
+		esac
+	done
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
 		esac
 	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
 	if [ $proto == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
 		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
+	########################################################
 }
 
 wait_for_option43() {
 	local time=$1
+	local default_wan_interface dhcp_discovery url
+
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get url acs url
+
+	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
 
 	local tm=0
 
-	log "Waiting for discovery of ACS URL from dhcp server ..."
-	while [ $tm -le $time ]
-	do
-		acs_url=`uci -c /var/state -q get cwmp.acs.dhcp_url`
-		if [ "$acs_url" != "" ]
-		then
-			break
-		else
-			sleep 1
-		fi
-		tm=$((tm+1))
-	done
+	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
+	then
+		echo "Waiting for discovery of ACS URL from dhcp server ..."
+		while [ $tm -le $time ]
+		do
+			acs_url=`uci -P /var/state -q get cwmp.acs.dhcp_url`
+			if [ "$acs_url" != "" ]
+			then
+				break
+			else
+				sleep 1
+			fi
+			tm=$((tm+1))
+		done
+	fi
 }
 
 wait_for_resolvfile() {
@@ -89,156 +150,32 @@ set_wan_interface() {
 	fi
 }
 
-copy_cwmp_etc_files_to_varstate() {
-	if [ ! -f /var/state/cwmp ]
-	then
-		if [ -f /etc/icwmpd/cwmp ]
-		then
-			uci -c /etc/icwmpd delete cwmp.acs
-			uci -c /etc/icwmpd commit cwmp
-			cp /etc/icwmpd/cwmp /var/state/cwmp
-		else
-			touch /var/state/cwmp
-		fi
-	fi
-	
-	mkdir -p /var/state/icwmpd
-	if [ -f /etc/icwmpd/.icwmpd_backup_session.xml ]
-	then
-		mv /etc/icwmpd/.icwmpd_backup_session.xml /var/state/icwmpd 2>/dev/null
-	fi
-	if [ -f /etc/icwmpd/.dm_enabled_notify.xml ]
-	then
-		mv /etc/icwmpd/.dm_enabled_notify /var/state/icwmpd 2>/dev/null
-	fi
-}
-
-copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/state/cwmp ]
-	then
-		cp /var/state/cwmp /etc/icwmpd 2>/dev/null
-	fi
-	if [ -f /var/state/icwmpd/.icwmpd_backup_session.xml ]
-	then
-		cp /var/state/icwmpd/.icwmpd_backup_session.xml /etc/icwmpd 2>/dev/null
-	fi
-	if [ -f /var/state/icwmpd/.dm_enabled_notify.xml ]
-	then
-		cp /var/state/icwmpd/.dm_enabled_notify /etc/icwmpd 2>/dev/null
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string:http://192.168.1.1' \
-		'dhcp_discovery:or("enable", "disable")' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'https_ssl_capath:file' \
-		'ipv6_enable:bool'
-		
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'periodic_notify_interval:uinteger'		
-}
-
-validate_defaults() {
-	config_load cwmp
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-
-	[ -z "${default_wan_interface}" ] && {
-		log "Wan interface is empty"
-		return 1;
-	}
-
-	return 0;
-}
-
-validate_acs_url() {
-	dhcp_url=`uci -c /var/state get cwmp.acs.dhcp_url`
-	[ -z "${url}" -a -z "${dhcp_url}" ] && {
-		log "ACS url is empty"
-		return 1;
-	}
-	
-	return 0
-}
-
 start_service() {
-	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-	
-	log "Waiting for usp.raw to be started"
-	ubus wait_for usp.raw
-	
-	validate_defaults || {
-		log "Validation of defaults failed"
-		return 1;
-	}
-	
-	# Set wan interface if not configured
-	set_wan_interface
-	
-	# Set dhcp option 43 if dhcp discovery enabled
-	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
-		enable_dhcp_option43 $default_wan_interface
-		wait_for_option43 20
-	fi
-	
-	validate_acs_url || {
-		log "Validation of ACS URL failed"
-		return 1;
-	}
-	
-	copy_cwmp_etc_files_to_varstate
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	procd_set_param respawn \
-		${respawn_threshold:-5} \
-		${respawn_timeout:-10} ${respawn_retry:-3}
-	
-	procd_close_instance
-}
+	if [ ! -f /tmp/.icwmpd_boot ]; then
+		touch /etc/icwmpd/.icwmpd_boot
+		touch /tmp/.icwmpd_boot
+	else
+		[ -f /sbin/netifd ] && echo "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+		[ -f /etc/config/wireless ] && echo "Waiting for WiFi to be started ..." && ubus -t 5 wait_for network.wireless
+		[ -f /usr/sbin/dnsmasq ] && echo "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+		[ -f /etc/config/dhcp ] && echo "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+		[ -f /usr/sbin/asterisk ] && echo "Waiting for Voice to be started ..." && ubus -t 5 wait_for asterisk
 
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
+		config_load cwmp
+		set_wan_interface
+		wait_for_option43 20
+		get_acs_url
+
+		procd_open_instance
+		procd_set_param command "$PROG"
+		if [ "$1" = "GetRPCMethods" ];then
+			procd_append_param command -g
+		elif [ -f /etc/icwmpd/.icwmpd_boot ]; then
+			procd_append_param command -b
+		fi
+		procd_set_param respawn "3" "7" "0"
+		procd_close_instance
+	fi
 }
 
 reload_service() {

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1 +1 @@
-/var/state/icwmpd/.icwmpd_backup_session.xml
+/etc/icwmpd/.icwmpd_backup_session.xml

icwmp/files/lib/upgrade/post-rootfs-fixup.d/215-icwmp

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# As part of sysupgrade we copy CWMP Backup Session XML file.
+
+
+# Abort on any error.
+set -e
+
+
+# Do nothing if user want to discard old settings.
+if [ -n "$SAVE_CONFIG" ] && [ $SAVE_CONFIG -eq 0 ]; then
+	exit 0
+fi
+
+# Source functions.
+for f in /lib/upgrade/iopsys*.sh; do
+	[ -r "$f" -a -s "$f" ] || continue
+	source $f
+done
+
+
+if [ -s "${2}/etc/icwmpd/.icwmpd_backup_session.xml" ]; then
+	cat "${2}/etc/icwmpd/.icwmpd_backup_session.xml" > "/etc/icwmpd/.icwmpd_backup_session.xml"
+fi
+
+# Report success.
+log "post-hooks" "CWMP Backup Session XML file migrated"
+
+exit 0

ieee1905/Config.in

@@ -1,10 +1,29 @@
-if (PACKAGE_ieee1905)
+if PACKAGE_ieee1905 || PACKAGE_lib1905al
 
-menu "Configurations"
+menu "developer/debug options"
 
-config IEEE1905_EXTENSION_ALLOWED
-	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
-	default y
+	config IEEE1905_MAP_COMPLETE_NETWORK
+		bool "Create network topology for complete network"
+		default n
 
+	config IEEE1905_SPEED_UP_DISCOVERY
+		bool "Speed up discovery of an AL in network"
+		default y
+
+	config IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
+		bool "Do not accept M1/M2 messages from unknown AL(s)"
+		default y
+
+	choice
+		prompt "Select ALME support"
+		default IEEE1905_ALME_OVER_UBUS
+
+		config IEEE1905_ALME_OVER_UBUS
+			bool "ALME methods supported over ubus"
+
+		#config IEEE1905_ALME_OVER_TCP
+		#	bool "ALME server over TCP port"
+
+	endchoice
 endmenu
 endif

ieee1905/Makefile

@@ -1,130 +1,142 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2019 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.0.6
+PKG_VERSION:=2.1.44
 
-LOCAL_DEV=0
+LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=13748cd599aa822dfdf0bf8cb58a79464244a7bf
+PKG_SOURCE_VERSION:=33d05c2223023ce5b57001008555bd0f82e88541
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-
-define Package/ieee1905/Default
+define Package/ieee1905
   SECTION:=utils
   CATEGORY:=Utilities
-  SUBMENU:=IEEE-1905.1 stack
+  TITLE:=IEEE1905 daemon
+  DEPENDS:= +libuci +libjson-c +libieee1905 +ubox +libpcap +libopenssl +libwifi +libeasy
 endef
 
 define Package/ieee1905/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libieee1905
-$(call Package/ieee1905/Default,$(1))
-  TITLE+= (library for CMDU and TLV handling)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json
-endef
-
-define Package/ieee1905
-$(call Package/ieee1905/Default,$(1))
-  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json +libwifi +ubus +libpthread \
-	   +libnl-genl +libieee1905
-endef
-
-
-define Package/map-plugin
-$(call Package/ieee1905/Default,$(1))
-  TITLE:=Multi-AP (Easymesh) plugin
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+	source "$(SOURCE)/Config.in"
 endef
 
 define Package/ieee1905/description
- This package provides IEEE Std 1905.1 stack.
+ IEEE1905 stack with extended functionalities.
 endef
 
-define Package/libieee1905/description
- This package provides library functions for IEEE Std 1905.1 stack.
+define Package/libieee1905
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=IEEE1905 cmdu tlv utility library
 endef
 
+define Package/libwsc
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Wifi Simple Configuration building and processing library
+  DEPENDS= +libopenssl +libuci +libubus
+endef
+
+define Package/lib1905hle
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=IEEE1905 hle stack library
+endef
+
+LIBS := \
+	$(if $(CONFIG_PACKAGE_libwsc),libwsc.so)
+
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-fstrict-aliasing \
+	-Wall \
+	-Wextra
 
-MAKE_PATH:=src
+MAKE_FLAGS += \
+	LIBS="$(LIBS)"
 
+ifeq ($(CONFIG_IEEE1905_SPEED_UP_DISCOVERY),y)
+TARGET_CFLAGS += -DSPEED_UP_DISCOVERY
+endif
+ifeq ($(CONFIG_IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS),y)
+TARGET_CFLAGS += -DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
+endif
+ifeq ($(CONFIG_IEEE1905_ALME_OVER_TCP),y)
+TARGET_CFLAGS += -DALME_OVER_TCP
+endif
+ifeq ($(CONFIG_IEEE1905_ALME_OVER_UBUS),y)
+TARGET_CFLAGS += -DALME_OVER_UBUS
+endif
+ifeq ($(CONFIG_IEEE1905_MAP_COMPLETE_NETWORK),y)
+TARGET_CFLAGS += -DIEEE1905_MAP_COMPLETE_NETWORK
+endif
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/ieee1905/* $(PKG_BUILD_DIR)/
+endef
+endif
 
 define Package/ieee1905/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/ieee1905
+	$(INSTALL_DIR) $(1)/usr/
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
+	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
+	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
+endef
+
+define Package/lib1905hle/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/lib1905hle.so $(1)/usr/lib/lib1905hle.so
 endef
 
 define Package/libieee1905/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/lib/libieee1905.so $(1)/usr/lib/libieee1905.so
 endef
 
-define Package/map-plugin/install
+define Package/libwsc/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/lib/libwsc.so $(1)/usr/lib/libwsc.so
 endef
 
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
+define Build/InstallDev/libwsc.so
 	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-
-define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwsc/include/wsc.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/lib/libwsc.so $(1)/usr/lib/
 endef
 
 define Build/InstallDev
-	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(call Build/InstallDev/map-plugin,$(1),$(2))
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/ieee1905
+	$(INSTALL_DIR) $(1)/usr/include/ieee1905
+	$(INSTALL_DIR) $(1)/usr/include/lib1905hle
+	$(CP) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/ieee1905/
+	$(CP) $(PKG_BUILD_DIR)/libieee1905/include/*.h $(1)/usr/include/ieee1905/
+	$(CP) $(PKG_BUILD_DIR)/lib1905hle/include/*.h $(1)/usr/include/lib1905hle/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/libieee1905.so $(1)/usr/lib
+	$(foreach lib,$(LIBS),$(call Build/InstallDev/$(lib),$(1),$(2));)
 endef
 
-
-$(eval $(call BuildPackage,ieee1905))
 $(eval $(call BuildPackage,libieee1905))
-$(eval $(call BuildPackage,map-plugin))
+$(eval $(call BuildPackage,lib1905hle))
+$(eval $(call BuildPackage,libwsc))
+$(eval $(call BuildPackage,ieee1905))

ieee1905/files/etc/config/ieee1905

@@ -1,22 +1,17 @@
 config ieee1905 'ieee1905'
-	option enabled '1'
-	option extension '1'
-	list extmodule 'map'
-	option registrar '2 5'
+        option enabled '1'
+        option debug  true
+        option debug_level  2
+        option macaddress 'auto'
+        option registrar 0
+        option cmdu_event 1
+        option map_plugin 1
 
-config ap
-	option band '2'
-	option ssid 'TestSSID.2'
-	option encryption 'psk2'
-	option key '5555500000'
-
-config ap
-	option band '5'
-	option ssid 'TestSSID.5'
-	option encryption 'psk2'
-	option key '2222200000'
+config security 'security'
+        list method 'PBC'
 
 config al-iface
-	option enabled 1
-	option ifname 'br-lan'
-	option type 'bridge'
+        option enabled 1
+        option ifname 'br-lan'
+        option media 'bridge'
+

ieee1905/files/etc/init.d/ieee1905

@@ -1,25 +1,72 @@
 #!/bin/sh /etc/rc.common
 
 START=96
-STOP=21
+STOP=22
 
 USE_PROCD=1
+PROG=/usr/sbin/ieee1905d
 
-start_service() {
-	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d"
-	procd_set_param respawn
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
-	procd_close_instance
+validate_ieee1905_section()
+{
+	uci_validate_section ieee1905 ieee1905 "${1}" \
+		'debug:bool:false' \
+		'enabled:bool:false'
 }
 
-service_triggers()
+configure_ieee1905()
 {
-	procd_add_reload_trigger "ieee1905"
+	local enabled debug
+
+	validate_ieee1905_section ${1} || {
+		echo "Validation of ieee1905 section failed"
+		exit 1;
+	}
+
+	if [ ${debug} -eq 1 ]; then
+		# Forward stdout of the command to logd
+		#procd_set_param stdout 1
+		# Same for stderr
+		procd_set_param stderr 1
+	fi
+
+	if [ ${enabled} -ne 1 ]; then
+		exit 0;
+	fi
+}
+
+configure_network()
+{
+	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
+	if [ "$?" -ne 0 ]; then
+		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
+		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
+	fi
+}
+
+service_running() {
+        ubus -t 2 wait_for wifi
+}
+
+start_service() {
+
+	[ -d /usr/lib/ieee1905 ] || mkdir -p /usr/lib/ieee1905
+
+	procd_open_instance ieee1905
+	procd_set_param command ${PROG}
+	configure_ieee1905 "ieee1905"
+	configure_network
+	procd_set_param respawn
+	procd_close_instance
 }
 
 reload_service() {
 	stop
 	start
 }
+
+service_triggers() {
+	procd_add_reload_trigger "network"
+	procd_add_reload_trigger "wireless"
+	procd_add_reload_trigger "netmode"
+	procd_add_reload_trigger "ieee1905"
+}

imonitor/Makefile

@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=imonitor
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
+PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

iop/config

@@ -1,3 +1,4 @@
+CONFIG_BUILD_NLS=y
 CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
@@ -21,12 +22,14 @@ CONFIG_PACKAGE_glib2=y
 CONFIG_PACKAGE_gre=y
 CONFIG_PACKAGE_icwmp=y
 CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-1905=y
 CONFIG_PACKAGE_map-topology=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
 CONFIG_PACKAGE_wfadatad=y
 CONFIG_PACKAGE_imonitor=m
 CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_iopupgrade=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
@@ -36,14 +39,20 @@ CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_jq=y
+CONFIG_PACKAGE_juci=y
+CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
+CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-mod-status=y
+CONFIG_PACKAGE_juci-mod-system=y
+CONFIG_PACKAGE_juci-network-device=y
+CONFIG_PACKAGE_juci-network-dsl=y
+CONFIG_PACKAGE_juci-network-netifd=y
+CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
 CONFIG_PACKAGE_libreswan=m
 CONFIG_PACKAGE_libwifi=y
 CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_luci-nginx=y
-# CONFIG_LUCI_JSMIN is not set
-# CONFIG_LUCI_CSSTIDY is not set
-CONFIG_PACKAGE_luci-mod-dashboard=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
 CONFIG_PACKAGE_map=y
 CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mwan3=y
@@ -60,7 +69,6 @@ CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
 CONFIG_PACKAGE_owsd=y
-CONFIG_PACKAGE_periodicstats=y
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
@@ -79,7 +87,6 @@ CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_sulu=y
 CONFIG_PACKAGE_swmodd=m
 CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_terminfo=y
@@ -218,7 +225,3 @@ CONFIG_TARGET_ROOTFS_TARGZ=y
 # Disable it. Most SoCs nowadays has HW random generators anyway.
 # CONFIG_PACKAGE_urandom-seed is not set
 # CONFIG_PACKAGE_urngd is not set
-
-# We use OpenSSL, no need to ship multiple TLS libraries
-CONFIG_PACKAGE_libustream-openssl=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set

iop/scripts/feeds_update.sh

@@ -14,7 +14,7 @@ function feeds_update {
     done
 
 
-    git remote -v | grep -qE '(git@|ssh://)' && developer=1
+    git remote -v | grep -q http || developer=1
 
     cp .config .genconfig_config_bak
 
@@ -32,7 +32,7 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek iopsys-econet"
+    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek"
     for target in $targets
     do
 	rm -f target/linux/$target

iop/scripts/genconfig.sh

@@ -5,6 +5,7 @@ function genconfig {
 	export IMPORT=1
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
+	export THEMEDIR="tmp/juci-themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/iopsys/iop"
 	CUSTPATH="customerconfigs"
@@ -16,9 +17,8 @@ function genconfig {
 	bcm27xx="target/linux/iopsys-bcm27xx"
 	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
 	ramips="target/linux/iopsys-ramips"
-	mediatek="target/linux/iopsys-mediatek"
-	econet="target/linux/iopsys-econet"
 	intel_mips="target/linux/intel_mips"
+	mediatek="target/linux/iopsys-mediatek"
 	x86="target/linux/iopsys-x86"
 	armvirt="target/linux/iopsys-armvirt"
 
@@ -116,8 +116,6 @@ function genconfig {
 			iopsys_ramips=$(cd $ramips; ./genconfig)
 		[ -e $mediatek/genconfig ] &&
 			iopsys_mediatek=$(cd $mediatek; ./genconfig)
-		[ -e $econet/genconfig ] &&
-			iopsys_econet=$(cd $econet; ./genconfig)
 		[ -e $intel_mips/genconfig ] &&
 			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
 		[ -e $x86/genconfig ] &&
@@ -128,7 +126,7 @@ function genconfig {
 			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -161,14 +159,6 @@ function genconfig {
 		fi
 	    done
 
-	    for p in $iopsys_econet; do
-		if [ $p == $profile ]; then
-		    target="iopsys_econet"
-			target_config_path="$econet/config"
-		    return
-		fi
-	    done
-
 	    for p in $iopsys_intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
@@ -205,6 +195,12 @@ function genconfig {
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
 		DEVELOPER=1
+
+		bcmAllowed=0
+		endptAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
 	}
 
 	v() {
@@ -237,7 +233,7 @@ function genconfig {
 		local ALL="$1"
 		local CUSTOMER="$2"
 		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
 			if [ "$boards" ]; then
 				echo "$CUSTOMER has following boards:"
 				for board in $boards; do
@@ -254,7 +250,7 @@ function genconfig {
 			if [ "$customers" -a "$ALL" == 1 ]; then
 				for customer in $customers; do
 					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
 					if [ "$boards" ]; then
 						for board in $boards; do
 							echo -e "\t$board"
@@ -308,6 +304,13 @@ function genconfig {
 			v "rm -rf $FILEDIR*"
 			rm -rf $FILEDIR*
 		fi
+
+		if [ ! -d "$THEMEDIR" ]; then
+			mkdir -p $THEMEDIR
+		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
+			v "rm -rf $THEMEDIR/*"
+			rm -rf $THEMEDIR/*
+		fi
 	}
 
 	create_and_copy_files()
@@ -357,26 +360,26 @@ function genconfig {
 			subtarget="xrx500"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
 			device=$(echo $BOARDTYPE | tr a-z A-Z)
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
 		elif [ "$target" = "iopsys_ramips" ]; then
 			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		elif [ "$target" = "iopsys_mediatek" ]; then
 			subtarget="mt7622"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_econet" ]; then
-			subtarget="en7562"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 		elif [ "$target" = "iopsys_bcm27xx" ]; then
 			subtarget="iopsys_bcm2711"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
@@ -396,6 +399,11 @@ function genconfig {
 					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
 					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
 				fi
+				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
+					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
+					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
+					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
+				fi
 				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
 					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
@@ -411,14 +419,11 @@ function genconfig {
 
 		# Set target version
 		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		local GIT_REV=$(git rev-parse --short HEAD)
-		local GIT_VER="$GIT_TAG"
-		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
-		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
-		# Enable Package source tree override if selected
+		# Enable Pckage source tree override if selected
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
 		# developer mode selected ?
@@ -426,8 +431,12 @@ function genconfig {
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
 		else
 			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
+			echo "CONFIG_BCM_OPEN=y" >> .config
+			echo "CONFIG_ENDPT_OPEN=y" >> .config
 		fi
 
 		if [ -n "$BRCM_MAX_JOBS" ]
@@ -435,6 +444,9 @@ function genconfig {
 		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
 		fi
 
+		# Force regeneration of themes
+		touch package/feeds/iopsys/juci/Makefile
+
 		# Force regeneration of kernel Makefile
 		# Needed to disable kmods for iopsys-brcm targets
 		touch package/kernel/linux/Makefile

iop/scripts/genconfig_min.sh

@@ -9,14 +9,13 @@ function genconfig_min {
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
+	#always use the mirror
 	export DEVELOPER=0
 	target="bogus"
-	target_config_path=""
+	config_path=""
 	bcm27xx="target/linux/iopsys-bcm27xx"
 	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
 	ramips="target/linux/iopsys-ramips"
-	mediatek="target/linux/iopsys-mediatek"
-	econet="target/linux/iopsys-econet"
 	intel_mips="target/linux/intel_mips"
 	x86="target/linux/iopsys-x86"
 	armvirt="target/linux/iopsys-armvirt"
@@ -81,7 +80,7 @@ function genconfig_min {
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
-		local profile=$1
+	    local profile=$1
 
 		[ -n "$profile" ] || return
 
@@ -103,7 +102,7 @@ function genconfig_min {
 
 			if [ $pfound -eq 1 ]; then
 				target="$(echo $TARGET | tr '-' '_')"
-				target_config_path="$targetpath/config"
+				config_path="$targetpath/config"
 			fi
 
 			return
@@ -113,10 +112,6 @@ function genconfig_min {
 			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
 		[ -e $ramips/genconfig ] &&
 			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
-		[ -e $econet/genconfig ] &&
-			iopsys_econet=$(cd $econet; ./genconfig)
 		[ -e $intel_mips/genconfig ] &&
 			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
 		[ -e $x86/genconfig ] &&
@@ -127,7 +122,7 @@ function genconfig_min {
 			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -139,7 +134,7 @@ function genconfig_min {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			target_config_path="$brcm63xx_arm/config"
+			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -147,23 +142,7 @@ function genconfig_min {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			target_config_path="$ramips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_econet; do
-		if [ $p == $profile ]; then
-		    target="iopsys_econet"
-			target_config_path="$econet/config"
+			config_path="$ramips/config"
 		    return
 		fi
 	    done
@@ -171,7 +150,7 @@ function genconfig_min {
 	    for p in $iopsys_intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			target_config_path="$intel_mips/config"
+			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
@@ -179,7 +158,7 @@ function genconfig_min {
 	    for p in $iopsys_x86; do
 		if [ $p == $profile ]; then
 		    target="iopsys_x86"
-			target_config_path="$x86/config"
+			config_path="$x86/config"
 		    return
 		fi
 	    done
@@ -187,7 +166,7 @@ function genconfig_min {
 	    for p in $iopsys_armvirt; do
 		if [ $p == $profile ]; then
 		    target="iopsys_armvirt"
-			target_config_path="$armvirt/config"
+			config_path="$armvirt/config"
 		    return
 		fi
 	    done
@@ -195,14 +174,14 @@ function genconfig_min {
 	    for p in $iopsys_bcm27xx; do
 		if [ $p == $profile ]; then
 		    target="iopsys_bcm27xx"
-			target_config_path="$bcm27xx/config"
+		        config_path="$bcm27xx/config"
 		    return
 		fi
 	    done
 
 	}
 
-	git remote -v | grep -qE '(git@|ssh://)' && {
+	git remote -v | grep -q http || {
 		DEVELOPER=1
 
 		bcmAllowed=0
@@ -231,8 +210,7 @@ function genconfig_min {
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
 		echo
-		echo "Example ./iop genconfig eg400 OPERATORX"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig dg400prime IOPSYS"
 		echo
 		exit 0
 	}
@@ -282,12 +260,12 @@ function genconfig_min {
 
 	generate_config()
 	{
-		DIFFFILE="$1"
-		MASTERFILE="$2"
-		while read p; do
-			v "$p"
-			sed -r -i "$p" $MASTERFILE
-		done < $DIFFFILE
+	DIFFFILE="$1"
+	MASTERFILE="$2"
+	while read p; do
+		v "$p"
+		sed -r -i "$p" $MASTERFILE
+	done < $DIFFFILE
 	}
 
 	setup_dirs()
@@ -334,13 +312,11 @@ function genconfig_min {
 		v "cp $CONFIGPATH/config .config"
 		cp $CONFIGPATH/config .config
 
-		if [ -f $target_config_path/config ]; then
-		    cat $target_config_path/config >> .config
-		    echo "" >> .config
+		if [ -f $config_path/config ]; then
+		    cat $config_path/config >> .config
 		fi
-		if [ -f $target_config_path/$BOARDTYPE/config ]; then
-		    cat $target_config_path/$BOARDTYPE/config >> .config
-		    echo "" >> .config
+		if [ -f $config_path/$BOARDTYPE/config ]; then
+		    cat $config_path/$BOARDTYPE/config >> .config
 		fi
 
 		#special handling for intel_mips/iopsys_ramips which use TARGET_DEVICES
@@ -348,29 +324,23 @@ function genconfig_min {
 			subtarget="xrx500"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
 			device=$(echo $BOARDTYPE | tr a-z A-Z)
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
 		elif [ "$target" = "iopsys_ramips" ]; then
 			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_mediatek" ]; then
-			subtarget="mt7622"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-		elif [ "$target" = "iopsys_econet" ]; then
-			subtarget="en7562"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 		elif [ "$target" = "iopsys_bcm27xx" ]; then
 			subtarget="iopsys_bcm2711"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+                        echo "CONFIG_TARGET_${target}=y" >> .config
+                        echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+                        echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+                        echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
+                        device=$(echo $BOARDTYPE | tr a-z A-Z)
+                        echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
@@ -392,25 +362,21 @@ function genconfig_min {
 				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
 					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-					echo "" >> .config
 				fi
 				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
 					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-					echo "" >> .config
 				fi
 			done
 		fi
 
 		# Set target version
 		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		local GIT_REV=$(git rev-parse --short HEAD)
-		local GIT_VER="$GIT_TAG"
-		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
-		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_TAG}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
+
 		# Enable Package source tree override if selected
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
@@ -483,8 +449,6 @@ function genconfig_min {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
-
 		setup_dirs
 		create_and_copy_files "$@"
 	fi

iop/scripts/install_key.sh

@@ -1,29 +1,12 @@
 # this is a developer helper script to install the public ssh key in the created image
 
-DROPBEAR_AUTHORIZED_KEYS_FILE=/etc/dropbear/authorized_keys
-
-function get_ssh_public_keys {
-    (
-        shopt -s nullglob
-        # home directory, not all of those are supported by dropbear,
-        # but let's include them now already to decrease future maintenance
-        cat /dev/null ~/.ssh/{id_rsa,id_dsa,id_ecdsa,id_ecdsa_sk,id_ed25519,id_ed25519_sk,id_xmss}.pub 2> /dev/null
-        # keys added manually or automatically to the build dir
-        cat "files${DROPBEAR_AUTHORIZED_KEYS_FILE}" 2>/dev/null
-        # keys in the agent (useful when using SSH agent forwarding)
-        ssh-add -L 2> /dev/null
-    ) | sort | uniq
-}
-
 function install_key {
-    local build_dir_dropbear_authorized_keys_file="files${DROPBEAR_AUTHORIZED_KEYS_FILE}"
-    mkdir -p "$(dirname "$build_dir_dropbear_authorized_keys_file")"
-    get_ssh_public_keys > "$build_dir_dropbear_authorized_keys_file"
-    chmod 0644 "$build_dir_dropbear_authorized_keys_file"
-    echo "Keys in "$build_dir_dropbear_authorized_keys_file" are now:"
-    cat "$build_dir_dropbear_authorized_keys_file"
-    echo
-    echo "Disabling login on serial console..."
+
+    mkdir -p files/etc/dropbear
+    test -e ~/.ssh/id_dsa.pub && cat ~/.ssh/id_dsa.pub >>files/etc/dropbear/authorized_keys
+    test -e ~/.ssh/id_rsa.pub && cat ~/.ssh/id_rsa.pub >>files/etc/dropbear/authorized_keys
+    chmod 0644 files/etc/dropbear/authorized_keys
+
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "console::askconsolelate:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
@@ -31,25 +14,4 @@ function install_key {
     echo Done
 }
 
-function ssh_install_key_help() {
-    echo Usage: $0 ssh_install_key HOSTNAME
-    echo
-    echo "Installs SSH public keys to a device's authorized_keys file"
-}
-
-
-# this is a developer helper script to install the public ssh key on host running dropbear
-function ssh_install_key {
-    if [ $# -ne 1 ] || [ "$1" == '--help' ]; then
-        ssh_install_key_help
-        [ $# -eq 1 ]; return
-    fi
-    host="$1"
-    local keys="$(get_ssh_public_keys)"
-    echo "Adding the following keys to $DROPBEAR_AUTHORIZED_KEYS_FILE on $host:"
-    echo "$keys"
-    ssh root@$host "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
-}
-
-register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"
 register_command "install_key" "Install the user's public ssh key in the created image"

iop/scripts/ssh_install_key.sh

@@ -0,0 +1,17 @@
+# this is a developer helper script to install the public ssh key on host running dropbear
+
+function ssh_install_key {
+	if [ -e ~/.ssh/id_rsa.pub ]; then
+		echo "Adding public RSA key to $1"
+		KEY=`cat ~/.ssh/id_rsa.pub`
+	elif [ -e ~/.ssh/id_dsa.pub ]; then
+		echo "Adding public DSA key to $1"
+		KEY=`cat ~/.ssh/id_dsa.pub`
+	else
+		echo "No public key found"
+		exit 1
+	fi
+	ssh root@$1 "echo '$KEY' >> /etc/dropbear/authorized_keys" && echo ok
+}
+
+register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/taas.sh

@@ -26,8 +26,14 @@ function taas-init() {
 		exit 1
 	fi
 
+	# NAND erase block size.
+	nandBlkSz=$(grep CONFIG_TARGET_NAND_BLOCKSZ .config | \
+		tr -s "=\"" " " | cut -d " " -f 2)
+	nandBlkSz=$((nandBlkSz / 1024))
+
 	# Create a list of all images which might be of use.
-	for f in ${PWD}/bin/targets/iopsys-*/generic/last.*; do
+	for f in ${PWD}/bin/targets/iopsys-*/generic/last.* \
+			${PWD}/build_dir/target-arm*/bcmkernel/bcm963xx/targets/9*/bcm*_linux_raw_image_${nandBlkSz}.bin; do
 		[[ -s "$f" ]] && images+=("$f")
 	done
 

iop/scripts/update_package.sh

@@ -492,8 +492,7 @@ check_feeds()
     echo "Now checking if any changes have been done to the feeds."
     echo -e "${Green}_______________________________________________________________________________${Color_Off}"
 
-    feeds="$1"
-    [ -n "$feeds" ] || feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
+    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
@@ -553,7 +552,7 @@ check_feeds()
     done
 }
 
-is_local_and_remote_same()
+feeds_at_top()
 {
     git remote update 2>/dev/null 1>/dev/null
     LOCAL=$(git rev-parse @)
@@ -582,7 +581,7 @@ is_local_and_remote_same()
 usage(){
 	echo -e "$0 [flags]"
 	echo -e "flags:"
-	echo -e "  -f\tFeed to update"
+	echo -e "  -v\tVerbose mode"
 	echo -e "  -h\tShow this help"
 	echo -e "  -u\tUpdate package version\n"
 }
@@ -590,7 +589,7 @@ usage(){
 # Exported interface
 function update_package {
 
-    UPDATE=0
+	UPDATE=0
 
     Color_Off='\033[0m'       # Text Reset
 
@@ -604,18 +603,18 @@ function update_package {
     Cyan='\033[0;36m'         # Cyan
     White='\033[0;37m'        # White
 
-    while getopts "f:hu" opt; do
+    while getopts "v:hu" opt; do
 	case $opt in
-	    f)
-		feed=$OPTARG
+	    v)
+		verbose=$OPTARG
 		;;
 	    h)
-		usage
-		exit 1
-		;;
-	    u)
-		UPDATE=1
-		;;
+			usage
+			exit 1
+			;;
+		u)
+			UPDATE=1
+			;;
 	    \?)
 		echo "Invalid option: -$OPTARG" >&2
 		exit 1
@@ -638,9 +637,9 @@ function update_package {
     set -E
     trap '[ "$?" -ne 99 ] || exit 99' ERR
 
-    is_local_and_remote_same
-    [ -n "$feed" ] || check_packages
-    check_feeds $feed
+    feeds_at_top
+    check_packages
+    check_feeds
 }
 
 register_command "update_package" "Publish changes to packages and feeds"

iopupgrade/Makefile

@@ -0,0 +1,59 @@
+#
+# Copyright (C) 2019 iopsys
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=iopupgrade
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iopupgrade
+	CATEGORY:=Utilities
+	TITLE:=Iopsys system upgrade utility
+	URL:=
+#	DEPENDS:=
+endef
+
+define Package/iopupgrade/description
+	Application handling peripheral
+endef
+
+define Package/iopupgrade/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,iopupgrade))
+ 

iopupgrade/files/sbin/iopu

@@ -0,0 +1,329 @@
+#!/bin/sh
+
+###############################################################################
+# Global variables. can be used directly in any function called.
+cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
+		# eg: rootfs_0 or rootfs_1, currently used
+upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
+		# eg: rootfs_0 or rootfs_1, the one we want to update
+cmdline=""	# command line settings.
+cmdline_match="" # Headers to match to the image
+
+###############################################################################
+# file local variables. should not be used in imported functions. Can be used
+# by functions declared in this script
+chroot_cmdline=""	# command line for the iop_chroot command.
+board=""		# string, Board name that is going to be matched
+			# against header of firmware image
+upd_ubi_id=""		# num,	UBI volume number for the volume name
+			# "rootfs_$upd_vol", use to know what volume to run
+			# ubiupdatevol on.
+run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
+run_mount_cleanup=0	# set if we should run umount in cleanup
+upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
+log_stdout=1		# set to 0 to prevent the log to also print to stdout
+upd_noreboot=0		# set to 1 if we should not reboot after programming
+upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
+upd_forceboot=0		# set this to force upgrade of boot loader
+upd_keepconfig=0	# set this to keep the current configuration.
+###############################################################################
+# import external functions
+source /lib/upgrade/iopsys.sh
+[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
+
+# only call function if it exists
+function_call() {
+    if type "$1" 2>/dev/null >/dev/null
+    then
+	$1 $@
+    fi
+}
+
+###############################################################################
+# Cleanup and error handling functions.
+function log {
+    TIME=$(date)
+    [ $log_stdout -eq 1 ] && echo "$@"
+    echo "[$TIME] $@" >>/tmp/upd_log
+}
+
+# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
+# terminations. no printing to stdout/stderr allowed in this function or
+# anyhting it calls as stdout/stderr might no longer exist
+function finish {
+
+    if [ $run_cleanup -eq 1 ]
+    then
+
+	function_call upd_cleanup
+	run_cleanup=0
+	log ""
+    fi
+
+    if [ $run_mount_cleanup -eq 1 ]
+    then
+	log "Cleaning up after mount"
+	umount_newroot
+    fi
+    # always kill the timeout process, will leave the sleep but that is harmless
+    # as long as the kill will nerver be run.
+    if [ -n "$TIMEOUT_PID" ]; then
+        kill $TIMEOUT_PID 2>/dev/null
+        TIMEOUT_PID=""
+    fi
+
+    lock -u /tmp/iopu.lock
+}
+
+function ctrl_c {
+
+    # on ctrl-c we remove the exit handler as it is called directly.
+    trap - EXIT
+
+    # call cleanup function
+    finish
+
+    # do not continue program
+    exit 1
+}
+
+function sig_pipe {
+    log_stdout=0  # stdin,stdout,stderr do not exist anymore
+    log "Got sigpipe. Turning of log printing to stdout"
+}
+
+# if a timout happens terminate
+function timeout {
+    exit 1
+}
+
+# Not much that can be done if the mount fails but to try again.
+# if after 10 seconds there still is errors abort program.
+# UBIFS has some wierd time intervall after ubiupdatevol where
+# a mount of the newly written data results in a busy error.
+function mount_retry {
+    local tries=0
+
+    while [ $tries -lt 10 ]
+    do
+	if mount $@ 2>/dev/null
+	then
+	    return
+	fi
+	tries=$((tries + 1))
+	sleep 1
+    done
+
+    log "mount failed for command [mount $@] so upgrade failed."
+
+    exit 1
+}
+
+function mount_newroot {
+    run_mount_cleanup=1
+    mkdir -p /tmp/newroot
+    mkdir -p /tmp/newroot_overlay
+
+    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
+
+    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
+    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
+
+    mount_retry --bind /dev /tmp/newroot_overlay/dev
+    mount_retry --bind /proc /tmp/newroot_overlay/proc
+    mount_retry --bind /sys /tmp/newroot_overlay/sys
+    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
+
+    mkdir -p /tmp/newroot_overlay/tmp/oldroot
+    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
+    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
+}
+
+function umount_newroot {
+    umount /tmp/newroot_overlay/tmp/oldroot/tmp
+    umount /tmp/newroot_overlay/tmp/oldroot
+    umount /tmp/newroot_overlay/tmp
+    umount /tmp/newroot_overlay/sys
+    umount /tmp/newroot_overlay/proc
+    umount /tmp/newroot_overlay/dev
+    umount /tmp/newroot_overlay/rom
+    umount /tmp/newroot_overlay
+    umount /tmp/newroot
+    rmdir /tmp/newroot_overlay /tmp/newroot
+    run_mount_cleanup=0
+}
+
+function usage {
+    echo "usage: $0 iopu [opts] "
+    echo ""
+    echo "opts:"
+    echo ""
+    echo "	-n		Do not do the final reboot of the target board"
+    echo "	-c		Keep configuration"
+    echo "	-x		Force install even if firmware is not for this board"
+    echo "	-b		Force install of bootloader regardless of version installed"
+    echo "	-r		Jump into chroot env of other system"
+    echo "	-f		Firmware file to use"
+    echo "	-C \"command\"	Execute command in chroot env of other system"
+}
+
+# Execute command in newroot(other system root)
+function newroot_exec {
+
+    upd_vol=$(get_flashbank_next)
+    mount_newroot
+    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay "$@")
+    echo ""
+    umount_newroot
+
+}
+
+function system_is_y_image {
+
+    # find out what rootfs volume is active.
+    cur_vol=$(get_flashbank_current)
+    upd_vol=$(get_flashbank_next)
+
+    # convert volume name "rootfs_$upd_vol" into ubi volume id
+    upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
+    log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
+
+    # prepare to match dsl.
+    function_call upd_conf_dsl
+
+    log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
+    run_cleanup=1	# When we start to actually write data there might be some
+                        # things that need cleanup if we get an error/crash
+    if ! iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id; then
+	log "iopupgrade program Failed"
+	exit 1
+    fi
+
+    log "Firmware programmed to flash."
+
+    # Force upgrade of boot loader
+    [ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
+
+    if [ $upd_keepconfig -eq 1 ]; then
+	log "Transfering configuration to new system."
+	chroot_cmdline="$chroot_cmdline -c"
+    fi
+
+    mount_newroot
+    if ! chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline; then
+	log "Configuration migration failed!"
+	exit 1
+    fi
+    umount_newroot
+
+    log "New firmware fully installed."
+    run_cleanup=0
+
+
+    # Now make sure that we actually boot the new system on the next reboot
+    upd_finnish
+
+}
+
+function system_is_FIT_image {
+
+    # prepare to match dsl.
+    #function_call upd_conf_dsl
+
+    #here we write data 
+    bcm_flasher $firmware_file
+    bcm_bootstate 1
+    log "Firmware programmed to flash."
+}
+
+###############################################################################
+
+# just one instance
+# this check has to be done before we install handler to avoid removing the
+# lock even if it was not available.
+if  ! lock -n /tmp/iopu.lock
+then
+    echo "Another instance of iopu already running"
+    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
+    exit 1
+fi
+
+trap finish EXIT
+trap ctrl_c INT
+trap timeout SIGALRM
+trap sig_pipe SIGPIPE
+
+while getopts "nrxbhcC:f:" opt; do
+    case $opt in
+	n)
+	    upd_noreboot=1
+	    ;;
+	x)
+	    upd_forceimage=1
+	    ;;
+	b)
+	    upd_forceboot=1
+	    ;;
+	c)
+	    upd_keepconfig=1
+	    ;;
+	r)
+	    newroot_exec /bin/sh
+	    exit
+	    ;;
+	C)
+	    newroot_exec "${OPTARG}"
+	    exit
+	    ;;
+	f)
+	    firmware_file="${OPTARG}"
+	    ;;
+	h)
+	    usage
+	    exit 1
+	    ;;
+    esac
+done
+
+# put a timeout on this if it takes longer than 120 seconds we should abort
+# and clean up
+(
+	sleep 120 && kill -ALRM $$ 2>/dev/null		# send it a SIGALRM signal
+)&
+TIMEOUT_PID=$!
+
+log "Firmware upgrade started"
+
+# Should board name be checked
+if [ $upd_forceimage -eq 0 ]
+then
+   board=$(db get hw.board.model_name)
+   cmdline_match="board=$board"
+fi
+
+# BUG: should probably read a config file.
+if [ -f /proc/nvram/boardid ]
+then
+    system_is_FIT_image
+else
+    system_is_y_image
+fi
+
+# spawn the reboot to a subshell to allow the main program to quit before reset
+# to avoid any hanged network connection like ssh
+if [ $upd_noreboot -eq 0 ]
+then
+    (
+	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
+			# subshell and then the trap is no longer working.
+	sleep 1
+	log "Rebooting NOW!!!"
+	log ""
+	reboot
+    )&
+    log "Reboot initiated"
+else
+    log "Skipping reboot"
+fi
+
+

iopupgrade/files/sbin/iopu_chroot

@@ -0,0 +1,71 @@
+#!/bin/sh
+#
+# This program is intended to be run in a chroot environment where the old system
+# is mounted in /tmp/oldroot
+#
+
+
+###############################################################################
+# Global variables. can be used directly in any function called.
+
+
+###############################################################################
+# file local variables. should not be used in imported functions. Can be used
+# by functions declared in this script
+upd_forceboot=0
+log_stdout=1		# set to 0 to prevent the log to also print to stdout
+upd_keepconfig=0	# set this to keep the current configuration.
+
+###############################################################################
+# import external functions
+
+source /lib/upgrade/iopsys.sh
+[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
+
+
+# only call function if it exists
+function_call() {
+	if [ -n "$1" ] && type "$1" 2>/dev/null >/dev/null
+	then
+		$1 "$@" || exit
+	fi
+}
+# Cleanup and error handling functions.
+function log {
+	TIME=$(date)
+	[ $log_stdout -eq 1 ] && echo "$@"
+	echo "[$TIME] $@" >>/root/upd_log
+}
+
+
+while getopts "hbc" opt; do
+	case $opt in
+		h)
+			upd_usage
+			exit 1
+			;;
+		c)
+			upd_keepconfig=1
+			;;
+		b)
+			upd_forceboot=1
+			;;
+		\?)
+			echo "Invalid option: -$OPTARG" >&2
+			exit 1
+			;;
+	esac
+done
+
+# copy old install log over
+cp /tmp/oldroot/tmp/upd_log /root/upd_log
+
+# Upgrade boot loader if needed.
+function_call upd_program_boot
+
+# Let the new upgrade do whatever it needs,
+# such as configuration migration etc.
+if [ $upd_keepconfig -eq 1 -a -x /lib/upgrade/post-rootfs-fixup ]; then
+	(/lib/upgrade/post-rootfs-fixup /dev/null /tmp/oldroot) || exit
+fi
+

iopupgrade/files/sbin/iopu_chroot_env

@@ -0,0 +1,18 @@
+#!/bin/sh
+# this is run when "iopr -r" is executed.
+# intended to just show what environment is actually started.
+
+cat /etc/banner
+
+echo "/tmp/oldroot:"
+echo "	Contains the running root filesystem. It is live so files are in use"
+echo "	Anything copying/reading files from there needs to make sure it is done safely."
+echo ""
+
+Color_Off='\033[0m'       # Text Reset
+Red='\033[0;31m'          # Red
+
+PS1="${Red}chroot_new${Color_Off}:\w\#"
+export PS1
+export Red
+export Color_Off

juci/Makefile

@@ -0,0 +1,122 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=juci
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/juci.git
+PKG_SOURCE_VERSION:=70b66bfc7f0e25e77b6920c3d44e5b05f4bfcf95
+PKG_VERSION:=2020-05-27
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_SOURCE_SUBDIR)
+
+PKG_RELEASE=$(PKG_VERSION)-$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/juci
+  $(Package/juci/default)
+  SECTION:=juci
+  CATEGORY:=JUCI
+  MENU=1
+  TITLE:=JUCI Core Package (select this to select default plugins)
+  DEPENDS:=+libubox +libubus +owsd +rpcd +rpcd-mod-file +questd
+endef
+
+define Build/InstallDev 
+	$(INSTALL_DIR) $(1)/usr/src/
+	ln -s $(PKG_BUILD_DIR) $(1)/usr/src/juci
+endef 
+
+define Build/Compile
+	$(call Build/Compile/Default,THEME_PATH="$(TOPDIR)/tmp/juci-themes/")
+endef
+
+define Package/juci/description
+ JUCI Javascript UCI Web interface.
+endef
+
+define Package/juci/install
+	$(INSTALL_DIR) $(1)/
+	$(CP) $(PKG_BUILD_DIR)/bin/juci/* $(1)/
+	$(CP) ./files/* $(1)/
+endef
+
+define Package/juci/postinst
+#!/bin/sh
+
+juci-update
+exit 0
+endef
+
+$(eval $(call BuildPackage,juci))
+
+####### Extensions / Themes and Plugins
+
+define RegisterAddonInner
+define Package/$(2)
+	SECTION:=juci
+	CATEGORY:=JUCI
+	TITLE:=default
+	SUBMENU:=$(1)
+	TITLE:=$(if $(3),$(3),JUCI $(2) plugin)
+	DEPENDS:=$(4)
+endef
+
+define Package/$(2)/install
+	$(INSTALL_DIR) $$(1)/
+	$(CP) $(PKG_BUILD_DIR)/bin/$(2)/* $$(1)/
+endef
+endef
+
+define RegisterAddon
+	$(eval $(call RegisterAddonInner,$(1),$(2),$(3),$(4),$(5)))
+	$(eval $(call BuildPackage,$(2)))
+endef
+
+$(eval $(call RegisterAddon,Plugins,juci-catv, CATV Module,@(PACKAGE_catv)))
+$(eval $(call RegisterAddon,Plugins,juci-cgroups, CGroups Module,@(PACKAGE_icgroupd)))
+$(eval $(call RegisterAddon,Plugins,juci-ddns, DDNS Configuration,@(PACKAGE_ddns-scripts)))
+$(eval $(call RegisterAddon,Plugins,juci-diagnostics, Simple Diagnostics,@(PACKAGE_busybox)))
+$(eval $(call RegisterAddon,Plugins,juci-ndt, NDT Speed Test client,@(PACKAGE_ndt)))
+$(eval $(call RegisterAddon,Plugins,juci-dnsmasq-dhcp, DHCP/DNSMasq Configuration,@(PACKAGE_dnsmasq||PACKAGE_dnsmasq-full)))
+$(eval $(call RegisterAddon,Plugins,juci-dropbear, Dropbear Configuration,@(PACKAGE_dropbear)))
+$(eval $(call RegisterAddon,Plugins,juci-easyqos, Easy QoS module,@(PACKAGE_easy-qos)))
+$(eval $(call RegisterAddon,Plugins,juci-event, Event Module,@(PACKAGE_owsd)))
+$(eval $(call RegisterAddon,Plugins,juci-firewall-fw3, Firewall Configuration,@(PACKAGE_firewall)))
+$(eval $(call RegisterAddon,Plugins,juci-icwmp, TR-069 Module,@(PACKAGE_icwmp)))
+$(eval $(call RegisterAddon,Plugins,juci-config-backup, Config Backup Module))
+$(eval $(call RegisterAddon,Plugins,juci-qos, QoS module,@(PACKAGE_qos-scripts)))
+$(eval $(call RegisterAddon,Plugins,juci-voice-client, Asterisk Voice Client Module,@(PACKAGE_asterisk)))
+$(eval $(call RegisterAddon,Plugins,juci-minidlna, MiniDLNA Configuration,@(PACKAGE_minidlna)))
+$(eval $(call RegisterAddon,Plugins,juci-mcproxy, Multicast Proxy Configuration,@(PACKAGE_mcproxy)))
+$(eval $(call RegisterAddon,Plugins,juci-mod-status, Status Reporting Module,@(PACKAGE_questd)))
+$(eval $(call RegisterAddon,Plugins,juci-mod-system, System Administration Module))
+$(eval $(call RegisterAddon,Plugins,juci-mwan3, mwan3 Configuration,@(PACKAGE_mwan3)))
+$(eval $(call RegisterAddon,Plugins,juci-natalie-dect, DECT Module,@(PACKAGE_dectmngr2)))
+$(eval $(call RegisterAddon,Plugins,juci-netmode, Netmode Module,@(PACKAGE_netmode)))
+$(eval $(call RegisterAddon,Plugins,juci-network-device, Network Device Configuration,@(PACKAGE_netifd)))
+$(eval $(call RegisterAddon,Plugins,juci-network-dsl, DSL Module))
+$(eval $(call RegisterAddon,Plugins,juci-network-netifd, Network Module,@(PACKAGE_netifd)))
+$(eval $(call RegisterAddon,Plugins,juci-network-port, Ethernet Port Configuration,@(PACKAGE_port-management)))
+$(eval $(call RegisterAddon,Plugins,juci-openvpn, OpenVPN configuration,@(PACKAGE_openvpn)))
+$(eval $(call RegisterAddon,Plugins,juci-owsd, OWSD configuration,@(PACKAGE_owsd)))
+$(eval $(call RegisterAddon,Plugins,juci-printer, p910nd Printer Server Configuration,@(PACKAGE_p910nd)))
+#$(eval $(call RegisterAddon,Plugins,juci-realtime-graphs, Realtime Graphs))
+$(eval $(call RegisterAddon,Plugins,juci-samba, Samba Configuration,@(PACKAGE_samba3)))
+$(eval $(call RegisterAddon,Plugins,juci-sfp, SFP Configuration,@(PACKAGE_peripheral_manager)))
+$(eval $(call RegisterAddon,Plugins,juci-snmpd, SNMP Module,@(PACKAGE_snmpd)))
+$(eval $(call RegisterAddon,Plugins,juci-sysupgrade, Sysupgrade Firmware Upgrade,@(PACKAGE_rpcd-mod-rpcsys)))
+$(eval $(call RegisterAddon,Plugins,juci-uhttpd, uHTTPD Configuration,@(PACKAGE_uhttpd)))
+$(eval $(call RegisterAddon,Plugins,juci-upnp, UPnP Configuration Module,@(PACKAGE_miniupnpd)))
+#$(eval $(call RegisterAddon,Plugins,juci-usb, USB Module))
+$(eval $(call RegisterAddon,Plugins,juci-wireless, Wireless Management Module))
+$(eval $(call RegisterAddon,Plugins,juci-wifilife, WiFi Life Module,@(PACKAGE_wifilife)))
+$(eval $(call RegisterAddon,Themes,juci-theme-iopsys))
+
+####### dynamically publish themes as packages #######
+$(foreach th,$(wildcard $(TOPDIR)/tmp/juci-themes/*),$(eval $(call RegisterAddon,Themes,$(notdir $(th)))))

juci/files/etc/config/juci

@@ -0,0 +1,66 @@
+config juci 'juci'
+	option homepage 'overview'
+	option theme 'juci-theme-iopsys'
+	option favicon 'favicon.ico'
+
+config login 'login'
+	option showusername '1'
+	option defaultuser 'user'
+
+config localization 'localization'
+	option default_language 'en'
+	list languages 'en'
+
+config wiki 'wiki'
+	option visible '0'
+	option version 'v4.2.x'
+
+config widget
+	list name 'overviewWidget11WAN'
+	list require 'ubus:network.interface'
+
+config widget
+	list name 'overviewWidget10Network'
+	list require 'ubus:network.interface'
+	list require 'ubus:router.network->hosts'
+
+config widget
+	list name 'overviewWidget00WiFi'
+	list require 'ubus:wifi'
+	list require 'ubus:wifi.wps'
+
+config menu
+	option path 'overview'
+	option page 'overview'
+
+config menu
+	option path 'system'
+	option page 'system'
+	option redirect 'first'
+
+config menu
+	option path 'status'
+	option page 'status'
+	option redirect 'first'
+
+config menu
+	option path 'status/system'
+	option page 'status-system'
+	list require 'ubus:router.system->info'
+
+config menu
+	option path 'status/network'
+	option page 'status-network'
+	list require 'ubus:network.interface'
+
+config menu
+	option path 'status/dsl'
+	option page 'network-dsl-status'
+	list require 'ubus:dsl->stats'
+	list require 'ubus:dsl->status'
+
+config menu
+	option path 'system/upgrade'
+	option page 'settings-upgrade'
+	list expose 'admin'
+

juci/files/etc/init.d/juci

@@ -0,0 +1,41 @@
+#!/bin/sh /etc/rc.common
+. /lib/functions.sh
+
+START=94
+STOP=06
+
+USE_PROCD=1
+NAME=juci
+
+start_service() {
+	mkdir -p /tmp/juci
+	touch /www/index.html.gz
+	chmod 755 /www/cgi-bin/luci
+	# this will simply update index.html to include any files that are for some reason not included
+	# a good way to make sure all plugins are properly included at each boot
+	config_load juci
+	local theme
+	config_get theme juci theme
+	if [ "$theme" ]
+	then
+		if [ -f /www/themes/theme.js.gz ] 
+			then
+			rm -f /www/themes/theme.js.gz
+		fi
+		if [ -f /www/themes/*$theme.js.gz ]
+			then
+			ln -s /www/themes/*$theme.js.gz /www/themes/theme.js.gz
+		fi
+	fi
+	juci-update
+}
+
+stop() {
+	service_stop /sbin/juci
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger juci
+}
+

juci/files/etc/uci-defaults/00-default-juci-rpcd-acl

@@ -0,0 +1,49 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+USER_SECTION=""
+USER_EXISTS=0
+
+find_user(){
+	local section="$1"
+	local user="$2"
+	config_get username $section username
+	if [ "$username" == "$user" ]; then
+		USER_SECTION="$section"
+		USER_EXISTS=1
+	fi
+}
+
+config_load rpcd
+
+USER_EXISTS=0
+config_foreach find_user login root
+if [ $USER_EXISTS -eq 1 ]; then
+	uci delete rpcd.$USER_SECTION
+fi
+
+USER_EXISTS=0
+config_foreach find_user login admin
+if [ $USER_EXISTS -eq 0 ]; then
+	uci -q add rpcd login >/dev/null
+	uci -q set rpcd.@login[-1].username="admin"
+	uci -q set rpcd.@login[-1].password="\$p\$admin"
+	uci -q add_list rpcd.@login[-1].read="enduser"
+	uci -q add_list rpcd.@login[-1].read="administrator"
+	uci -q add_list rpcd.@login[-1].write="enduser"
+	uci -q add_list rpcd.@login[-1].write="administrator"
+fi
+
+USER_EXISTS=0
+config_foreach find_user login user
+if [ $USER_EXISTS -eq 0 ]; then
+	uci -q add rpcd login >/dev/null
+	uci -q set rpcd.@login[-1].username="user"
+	uci -q set rpcd.@login[-1].password="\$p\$user"
+	uci -q add_list rpcd.@login[-1].read="enduser"
+	uci -q add_list rpcd.@login[-1].write="enduser"
+fi
+
+uci commit rpcd
+

juci/files/usr/share/rpcd/acl.d/administrator.json

@@ -0,0 +1,21 @@
+{
+	"administrator": {
+		"description": "Administrator Access Rights",
+		"read": {
+			"ubus": {
+				"file": [
+					"write"
+				],
+				"rpc-sys": [
+					"upgrade_start",
+					"upgrade_test"
+				]
+			}
+		},
+		"write": {
+			"file": {
+				"/tmp/firmware.bin": ["write"]
+			}
+		}
+	}
+}

juci/files/usr/share/rpcd/acl.d/enduser.json

@@ -0,0 +1,217 @@
+{
+	"enduser": {
+		"description": "End User Access Rights",
+		"read": {
+			"ubus": {
+				"dect": [
+					"state",
+					"handset",
+					"status",
+					"call"
+				],
+				"dsl": [
+					"status",
+					"stats"
+				],
+				"network.device": [
+					"status"
+				],
+				"network.interface*": [
+					"status",
+					"dump",
+					"up",
+					"down"
+				],
+				"router.network": [
+					"clients",
+					"hosts",
+					"dump"
+				],
+				"router.system": [
+					"info",
+					"memory",
+					"filesystem",
+					"process",
+					"processes"
+				],
+				"session": [
+					"access",
+					"list",
+					"destroy",
+					"login"
+				],
+				"system": [
+					"info",
+					"board",
+					"reboot"
+				],
+				"testnet": [
+					"status"
+				],
+				"uci": [
+					"*"
+				],
+				"voice.asterisk": [
+					"status",
+					"call_log",
+					"platform",
+					"supported_countries"
+				],
+				"wifi": [
+					"status"
+				],
+				"wifi.ap.*": [
+					"status",
+					"stats",
+					"assoclist",
+					"stations"
+				],
+				"wifi.radio.*": [
+					"status",
+					"stats",
+					"scan",
+					"scanresults",
+					"autochannel"
+				],
+				"wifi.wps": [
+					"start",
+					"stop",
+					"status",
+					"showpin"
+				]
+			},
+			"uci": [
+				"dhcp",
+				"firewall",
+				"juci",
+				"network",
+				"voice_client",
+				"wireless"
+			],
+			"owsd": [
+				"client",
+				"wifi.radio",
+				"wifi.sta",
+				"wifi.wps"
+			]
+		},
+		"write": {
+			"uci": [
+				"dhcp",
+				"firewall",
+				"network",
+				"wireless"
+			],
+			"uci_granular": {
+				"dhcp": [
+					{
+						"match": {
+							".type": "dhcp"
+						},
+						"option": [
+							"*"
+						]
+					},
+					{
+						"match": {
+							".type": "host"
+						},
+						"option": [
+							"*"
+						]
+					}
+				],
+				"firewall": [
+					{
+						"match": {
+							".type": "settings",
+							".name": "settings"
+						},
+						"option": [
+							"disabled"
+						]
+					},
+					{
+						"match": {
+							".type": "zone"
+						},
+						"option": [
+							"masq",
+							"name",
+							"network"
+						]
+					},
+					{
+						"match": {
+							".type": "redirect"
+						},
+						"option": [
+							"*"
+						]
+					},
+					{
+						"match": {
+							".type": "rule"
+						},
+						"option": [
+							"*"
+						]
+					},
+					{
+						"match": {
+							".type": "dmz"
+						},
+						"option": [
+							"enabled",
+							"host",
+							"ip6addr"
+						]
+					}
+				],
+				"network": [
+					{
+						"match": {
+							".type": "interface"
+						},
+						"option": [
+							"*"
+						]
+					}
+				],
+				"wireless": [
+					{
+						"match": {
+							".type": "wifi-status"
+						},
+						"option": [
+							"wps"
+						]
+					},
+					{
+						"match": {
+							".type": "wifi-iface",
+							"mode": "ap"
+						},
+						"option": [
+							"*"
+						]
+					},
+					{
+						"match": {
+							".type": "wifi-device"
+						},
+						"option": [
+							"channel"
+						]
+					}
+				]
+			},
+			"owsd": [
+				"client",
+				"wifi.radio",
+				"wifi.sta",
+				"wifi.wps"
+			]
+		}
+	}
+}

map-1905/Makefile

@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2019 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=map-1905
+PKG_VERSION:=0.0.19
+
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=46afa4c0aa56d8762d9402cfdaddf4adaa8a058a
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-1905.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/map-1905
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:= MultiAP Stack
+  DEPENDS:= +ubox +ieee1905
+endef
+
+define Package/map-1905/description
+ MultiAP plugin for ieee1905d based on Wifi alliance's MAP-r2 specification
+endef
+
+define Package/libmaputils
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=WFA MultiAP utility library
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-D_GNU_SOURCE \
+	-fstrict-aliasing \
+	-Wall \
+	-Wextra
+
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/map-1905/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/map-1905/install
+	$(INSTALL_DIR) $(1)/usr/
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/libwifimap2.so $(1)/usr/lib/ieee1905/
+endef
+
+define Package/libmaputils/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmaputils.so $(1)/usr/lib/libmaputils.so
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/map1905
+	$(CP) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/map1905/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmaputils.so $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libmaputils))
+$(eval $(call BuildPackage,map-1905))

map-agent/Makefile

@@ -1,33 +1,30 @@
 #
-# Copyright (C) 2020-21 IOPSYS Software Solutions AB
+# Copyright (C) 2020 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=6.1.2
+PKG_VERSION:=3.5.20
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=b038629846d4052c5b2975c060b43a33b632cc77
+PKG_SOURCE_VERSION:=f396b503f111461e7869f302907e1d9ec639ca3a
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-agent
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/map-agent.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 
-PKG_BUILD_DEPENDS:=map-plugin
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-agent
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=WiFi multi-AP Agent (EasyMesh R2)
-  DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +map-plugin
+  DEPENDS:=+libwifi +libuci +libubox +ubus +libmaputils +libwsc +libeasy
 endef
 
 define Package/map-agent/description
@@ -45,11 +42,20 @@ TARGET_CFLAGS += \
 
 MAKE_PATH:=src
 
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/map-agent
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/src/include/*.h $(1)/usr/include/map-agent
+	$(CP) $(PKG_BUILD_DIR)/src/utils/timer_impl.h $(1)/usr/include/map-agent
+	$(CP) $(PKG_BUILD_DIR)/src/utils/*.so* $(1)/usr/lib/
+endef
+
 define Package/map-agent/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/src/utils/*.so* $(1)/usr/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef
 

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -1,45 +0,0 @@
-#!/bin/sh
-
-wan=$(db -q get hw.board.ethernetWanPort)
-
-[ -z "$wan" ] && exit 1 # no configuration
-[ "$PORT" != "$wan" ] && exit 0
-
-remove_from_bridge() {
-	config_get ifname "$section" ifname
-
-	ubus call network.interface.$bridge remove_device '{"name":"$ifname"}'
-}
-
-update_bstas() {
-	local section="$1"
-	local action="$2"
-	local ifname onboarded
-
-	config_get ifname "$section" ifname
-	config_get_bool enabled "$section" enabled 0
-
-	if [ "$action" = "down" ]; then
-		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" disable_network 0  > /dev/null 2>&1
-#		wpa_cli -i "$ifname" save_config  > /dev/null 2>&1
-	elif [ "$action" = "up" ]; then
-		[ "$enabled" -eq 0 ] && return
-		wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" enable_network 0  > /dev/null 2>&1
-#		wpa_cli -i "$ifname" save_config  > /dev/null 2>&1
-	fi
-}
-
-if [ "$LINK" = "up" ]; then
-	touch /tmp/map.agent.bsta_global_disable
-
-	config_load "mapagent"
-	bridge=$(uci get mapagent.agent.al_bridge | cut -d '-' -f2)
-	config_foreach remove_from_bridge bk-iface $bridge
-	config_foreach update_bstas bk-iface down
-else
-	rm -f /tmp/map.agent.bsta_global_disable
-	config_load "mapagent"
-	config_foreach update_bstas bk-iface up
-fi

map-agent/files/etc/hotplug.d/ethernet/map-loop-detection

@@ -0,0 +1,84 @@
+#!/bin/sh
+
+diff=0
+wan=$(uci -q get ports.WAN.ifname)
+
+[ "$wan" == "" ] && exit 1 # no configuration
+[ "$PORT" != "$wan" ] && exit 0
+
+get_bridge() {
+	local id
+	local ifname="$1"
+	local bridge=""
+	id=$(cat /sys/class/net/${ifname}/brport/bridge/bridge/bridge_id)
+
+	#echo "bridge id = $id" > /dev/console
+
+	[ "$id" = "" ] && return
+
+	bridge=$(brctl show | grep $id | cut -f1)
+
+	case "$bridge" in
+		br-*)
+			bridge=$(echo $bridge | cut -c4-)
+		;;
+	esac
+
+	echo $bridge
+}
+
+disable_bstas() {
+	section="$1"
+
+	config_get mode "$section" mode "ap"
+	config_get ifname "$section" ifname
+	config_get device "$section" device
+	#echo mode=$mode ifname=$ifname > /dev/console
+
+	[ "$mode" == "sta" ] || return
+
+	uci set wireless.$section.disabled=1
+	bridge=$(get_bridge $ifname)
+	if [ "$bridge" != "" ]; then
+		#echo got bridge = $bridge > /dev/console
+		ubus call network.interface.$bridge remove_device '{"name":"$ifname"}'
+	fi
+	ifconfig "$ifname" down
+
+	diff=1
+	#echo disabled $ifname > /dev/console
+}
+
+enable_bstas() {
+	section="$1"
+	config_load "wireless"
+
+	config_get mode "$section" mode "ap"
+	config_get ifname "$section" ifname
+	config_get device "$section" device
+	#echo mode=$mode ifname=$ifname > /dev/console
+
+	[ "$mode" == "sta" ] || return
+
+	uci set wireless.$section.disabled=0
+	ifconfig "$ifname" up
+
+	diff=1
+	#echo enabled $ifname > /dev/console
+}
+
+config_load "wireless"
+
+if [ "$LINK" == "up" ]; then
+	config_foreach disable_bstas wifi-iface
+else
+	config_foreach enable_bstas wifi-iface
+fi
+
+#echo diff = $diff > /dev/console
+
+uci -q commit wireless
+[ "$diff" == "1" ] && {
+	#echo reloading via uci > /dev/console
+	ubus call uci commit '{"config":"wireless"}'
+}

map-agent/files/etc/hotplug.d/ethernet/map-topology-discovery

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-[ "$LINK" == "up" ] || exit 0
-[ "$PORT" == "" ] && exit 1
-
-ubus list ieee1905 > /dev/null 2>&1
-
-rc="$?"
-
-[ "$rc" != 0 ] && exit 1
-
-issue_discovery() {
-	local iface="$1"
-
-	res=$(ubus -t5 call ieee1905 buildcmdu "{\"type\":0, \"ifname\":\"${iface}\"}")
-	json_load "$res" > /dev/null 2>&1
-	json_get_var data data
-
-	[ "$data" == "" ] && return
-
-	ubus call ieee1905 cmdu "{\"dst\":\"01:80:c2:00:00:13\", \"type\":0, \"data\":\"${data}\"}"
-}
-
-process_vlans() {
-	section="$1"
-
-	config_get ifname "$section" ifname
-	config_get name "$section" name
-
-	[ "$2" == "$ifname" ] || return
-	[ "$name" == "" ] && return
-
-	issue_discovery $name
-
-	json_cleanup
-}
-
-# find and publish over any vlans
-config_load network
-config_foreach process_vlans interface $PORT
-config_foreach process_vlans device $PORT
-
-issue_discovery $PORT

map-agent/files/etc/init.d/mapagent

@@ -5,62 +5,13 @@ STOP=20
 
 USE_PROCD=1
 
-MAP_DEV="map_dev"
-MAP_IF="map"
-MAP_VETH="lei"
-
-create_map() {
-	uci -q set network.${MAP_DEV}=device
-	uci -q set network.${MAP_DEV}.name=br-map
-	uci -q set network.${MAP_DEV}.type=bridge
-	uci -q set network.${MAP_DEV}.bridge_empty=1
-
-	uci -q set network.${MAP_IF}=interface
-	uci -q set network.${MAP_IF}.device=br-map
-	uci -q set network.${MAP_IF}.is_lan=1
-
-	uci -q set mapagent.agent.al_bridge=br-map
-
-	uci -q commit
-
-	ubus call network reload
-	ubus -t 5 wait_for network.device
-
-	ip link add ${MAP_VETH} type veth peer name ${MAP_VETH}_lan 2>/dev/null
-	brctl addif br-map ${MAP_VETH} 2>/dev/null
-	brctl addif br-lan ${MAP_VETH}_lan 2>/dev/null
-	ip link set ${MAP_VETH} up 2>/dev/null
-	ip link set ${MAP_VETH}_lan up 2>/dev/null
-}
-
-remove_map() {
-	ip link delete ${MAP_VETH} &>/dev/null
-
-	uci -q delete network.${MAP_DEV}
-	uci -q delete network.${MAP_IF}
-
-	uci -q set mapagent.agent.al_bridge=br-lan
-
-	uci -q commit
-
-	ubus call network reload
-}
-
 start_service() {
 	config_load "mapagent"
 
-	ubus -t 5 wait_for wifi
-
-	sleep 2
-
 	local enabled
 	config_get_bool enabled agent enabled 1
 	[ "$enabled" -eq 0 ] && return 1
 
-	local ts
-	config_get_bool ts agent vlan_segregation 0
-	[ "$ts" -eq 1 ] && create_map #|| remove_map
-
 	procd_open_instance
         procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
@@ -69,13 +20,9 @@ start_service() {
 	procd_close_instance
 }
 
-#stop_service() {
-#	remove_map
-#}
-
 service_triggers()
 {
-	procd_add_reload_trigger "mapagent"
+	procd_add_reload_trigger "ieee1905"
 }
 
 reload_service() {

map-agent/files/lib/wifi/multiap

@@ -1,662 +0,0 @@
-#!/bin/sh
-
-# functions
-# wireless_teardown - tear down ifaces based on mapagent config
-# setup_network     - prepare /etc/config/network if necessary
-# setup_wireless    - prepare /etc/config/wireless based on mapagent config
-# write_credentials - write bBSS credentials to fBSS
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-. /lib/wifi/traffic_separation
-
-diff=0
-
-usage() {
-	cat <<EOF
-Usage: $0 [wireless_teardown|setup_network|setup_wireless|write_credentials]
-Platform specific Multi-AP script to prepare network and wifi subsystem based on
-mapagent configuration.
-wireless_teardown - tear down ifaces in /etc/config/wireless
-setup_network     - prepare /etc/config/network
-setup_wireless    - prepare /etc/config/wireless
-write_credentials - write bBSS credentials to fBSS
-EOF
-	exit 1
-}
-
-brcm_sync_credentials() {
-	bands=""
-	mapagent_process_fh() {
-		local section=$1
-		local dev=$2
-
-		config_get device $section device
-
-		[ "$dev" != "$device" ] && return
-
-		config_get band $section band
-		config_get ssid $section ssid
-		config_get encryption $section encryption
-		config_get key $section key
-
-		section=$(uci add ieee1905 ap)
-		[ "$section" == "" ] && return
-
-		uci -q set ieee1905.${section}.band=$band
-		uci -q set ieee1905.${section}.ssid="$ssid"
-		uci -q set ieee1905.${section}.encryption=$encryption
-		uci -q set ieee1905.${section}.key="$key"
-	}
-
-	mapagent_process_radio() {
-		local section=$1
-
-		config_get device $section device
-		config_get band $section band
-		config_get dedicated_backhaul $section dedicated_backhaul 0
-
-		[ "$dedicated_backhaul" != "0" ] && return
-
-		for b in $bands; do
-			if [ "$b" == "$band" ]; then
-				return
-			fi
-		done
-
-		config_foreach mapagent_process_fh fh-iface $device
-		bands="$bands $band"
-	}
-
-	ieee1905_del_ap() {
-		local section=$1
-
-		uci -q delete ieee1905.${section}
-	}
-
-	config_load ieee1905
-	config_foreach ieee1905_del_ap ap
-
-	config_load mapagent
-	config_foreach mapagent_process_radio wifi-radio
-
-	uci commit ieee1905
-}
-
-
-brcm_write_credentials() {
-	config_load mapagent
-
-	mapagent_apply_wireless() {
-		write_wireless() {
-			local section=$1
-			local map_ifname=$2
-			local bk_ssid="$3"
-			local bk_key="$4"
-
-			config_get ifname $section ifname
-
-			#echo found device=$device map=$multi_ap ifname=$ifname mapifname=$map_ifname
-
-			[ "$ifname" != "$map_ifname" ] && return
-
-			#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
-
-			uci -q set wireless.${section}.multi_ap_backhaul_ssid="$bk_ssid"
-			uci -q set wireless.${section}.multi_ap_backhaul_key="$bk_key"
-		}
-		config_load wireless
-
-		config_foreach write_wireless wifi-iface "$1" "$2" "$3"
-	}
-
-	mapagent_find_fbss() {
-		local section=$1
-		local dev=$2
-		local bk_ssid="$3"
-		local bk_key="$4"
-
-		config_get device $section device
-		config_get multi_ap $section multi_ap "0"
-
-		#echo found dev=$dev device=$device map=$multi_ap
-
-		[ "$device" != "$dev" ] && return
-		[ "$multi_ap" != "2" ] && return
-
-		config_get ifname $section ifname
-
-		#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
-
-		# subshell in hopes to maintain mapagent config loaded
-		echo $(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key") 2> /dev/null
-	}
-
-	mapagent_find_bbss() {
-		local section=$1
-		local dev=$2
-
-		config_get device $section device
-		config_get multi_ap $section multi_ap "0"
-		config_get enabled $section enabled "1"
-
-		#echo found dev=$dev device=$device map=$multi_ap
-
-		[ "$enabled" == "0" ] && return
-		[ "$device" != "$dev" ] && return
-		[ "$multi_ap" != "1" ] && return
-
-		config_get ssid $1 ssid
-		config_get key $1 key
-
-		#echo found ssid="$ssid" key="$key"
-
-		config_foreach mapagent_find_fbss fh-iface $dev "$ssid" "$key"
-	}
-
-	mapagent_process_radio() {
-		local section=$1
-
-		config_get device $section device
-
-		#echo found dev=$dev
-
-		config_foreach mapagent_find_bbss fh-iface $device
-	}
-
-
-	config_foreach mapagent_process_radio wifi-radio
-
-	uci commit wireless
-}
-
-brcm_set_network() {
-	local ifname=$1
-	local num=$2
-	local bssid=$3
-
-	wpa_cli -i $ifname set_n $num bssid $bssid
-}
-
-bsta_steer() {
-	local ifname=$1
-	local bssid=$2
-
-	rc=$(wpa_cli -i $ifname set_n 0 bssid $bssid)
-	[ "$rc" == "FAIL" ] && {
-		echo "1"
-		return;
-	}
-
-	rc=$(wpa_cli -i $ifname roam $bssid)
-	[ "$rc" == "FAIL" ] && {
-		echo "1"
-		return;
-	}
-}
-
-write_bsta_config() {
-	local ifname=$1
-
-	#echo diff = $diff > /dev/console
-
-	config_load mapagent
-
-	mapagent_apply_wl_bsta() {
-		apply_config() {
-			local section=$1
-			local bsta=$2
-			local bssid=$3
-
-			config_get ifname $section ifname
-
-			[ "$bsta" == "$ifname" ] || return
-			#echo setting diff = $diff > /dev/console
-			uci -q set wireless.${section}.bssid=$bssid
-			echo 1
-		}
-		config_load wireless
-
-		config_foreach apply_config wifi-iface $1 $2
-		uci commit wireless
-	}
-
-	mapagent_process_bk() {
-		local section=$1
-		local bsta=$2
-
-		config_get ifname $section ifname
-		#echo bsta = $bsta > /dev/console
-
-		[ "$bsta" == "$ifname" ] || return
-		#echo found ifname=$ifname > /dev/console
-
-		config_get bssid $section bssid
-		ret=$(mapagent_apply_wl_bsta $ifname $bssid)
-		[ "$ret" == "1" ] && diff=1
-	}
-
-
-	config_foreach mapagent_process_bk bk-iface $ifname
-
-	#echo result diff = $diff > /dev/console
-	[ "$diff" == "1" ] && {
-		ubus call uci commit '{"config":"wireless"}'
-		#echo reloading wireless > /dev/console
-	}
-
-}
-
-brcm_teardown_iface() {
-	config_load mapagent
-
-	local iface=$1
-
-	mapagent_teardown_wireless() {
-		write_wireless() {
-			local section=$1
-			local map_ifname=$2
-
-			config_get ifname $section ifname
-
-			[ "$ifname" != "$map_ifname" ] && return
-
-			uci -q set wireless.${section}.start_disabled="1"
-			uci -q set wireless.${section}.ssid="DISABLED-SSID"
-			uci -q set wireless.${section}.key="DISABLED-KEY"
-			uci -q delete wireless.${section}.multi_ap_backhaul_ssid
-			uci -q delete wireless.${section}.multi_ap_backhaul_key
-		}
-
-		config_load wireless
-
-		config_foreach write_wireless wifi-iface $1
-	}
-
-	mapagent_teardown_bss() {
-		local section=$1
-		local iface=$2
-
-		config_get ifname $section ifname
-
-		[ "$iface" != "$ifname" ] && return
-
-		config_get ifname $section ifname
-		uci -q set mapagent.${section}.enabled="0"
-		uci -q set mapagent.${section}.ssid="DISABLED-SSID"
-		uci -q set mapagent.${section}.key="DISABLED-KEY"
-
-		# subshell in hopes to maintain mapagent config loaded
-		$(mapagent_teardown_wireless $ifname)
-	}
-
-
-	config_foreach mapagent_teardown_bss fh-iface $iface
-
-	uci commit wireless
-	uci commit mapagent
-}
-
-brcm_bsta_to_wireless() {
-	config_load mapagent
-
-	mapagent_find_lowest_prio_onboarded() {
-		mapagent_process_bk() {
-			config_get priority $1 priority "2"
-			config_get onboarded $1 onboarded "0"
-
-			[ "$onboarded" = "0" ] && return
-
-			if [ -z "$sec" -o "$prio" = "-1" -o "$priority" -lt "$prio" ]; then
-				sec=$1
-				prio=$priority
-			fi
-		}
-
-		local sec=""
-		local prio="-1"
-
-		config_foreach mapagent_process_bk bk-iface
-		echo $sec
-	}
-
-	mapagent_enable_best() {
-		#echo 1=$1 best=$best > /dev/console
-		if [ "$1" = "$best" ]; then
-			uci -q set mapagent.$1.enabled='1'
-		else
-			uci -q set mapagent.$1.enabled='0'
-		fi
-	}
-
-	mapagent_bsta_to_wireless() {
-		mapagent_apply_wl_bsta() {
-			apply_config() {
-				local section=$1
-				local bsta=$2
-				local ssid="$3"
-				local key="$4"
-				local encryption=$5
-				local enabled=$6
-				local bssid=$7
-				local disabled="0"
-
-				config_get ifname $section ifname
-
-				[ -z "$enabled" -o "$enabled" = "0" ] && disabled="1"
-
-				[ "$bsta" == "$ifname" ] || return
-
-				uci -q set wireless.${section}.ssid="$ssid"
-				uci -q set wireless.${section}.key="$key"
-				uci -q set wireless.${section}.encryption=$encryption
-				uci -q set wireless.${section}.bssid="$bssid"
-				#uci -q set wireless.${section}.disabled=$disabled
-
-				[ "$disabled" != "1" ] && return
-				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
-				wpa_cli -i "$bsta" disable_network 0 > /dev/null 2>&1
-				wpa_cli -i "$bsta" save_config > /dev/null 2>&1
-
-				echo 1
-			}
-
-			config_load wireless
-
-			config_foreach apply_config wifi-iface $@
-			uci commit wireless
-		}
-
-		mapagent_find_other_creds() {
-			#echo "trying to find other creds for $2" > /dev/console
-			config_get band $1 band
-			config_get onboarded $1 onboarded "0"
-
-			[ "$3" != "$band" -o "$onboarded" = "0" ] && return
-
-			config_get ssid $1 ssid
-			config_get key $1 key
-			config_get encryption $1 encryption
-			config_get enabled $1 enabled "0"
-			config_get bssid $1 bssid
-
-			echo $(mapagent_apply_wl_bsta $2 "$ssid" "$key" $encryption $4 "$bssid")
-		}
-
-		config_get band $1 band
-		config_get ifname $1 ifname
-		config_get onboarded $1 onboarded "0"
-		config_get enabled $1 enabled "0"
-
-		if [ "$onboarded" = "0" ]; then
-			config_foreach mapagent_find_other_creds bk-iface $ifname $band $enabled
-		else
-			config_get ssid $1 ssid
-			config_get key $1 key
-			config_get encryption $1 encryption
-			config_get bssid $1 bssid
-
-			echo $(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
-		fi
-	}
-
-#	best=$(mapagent_find_lowest_prio_onboarded)
-#
-#	[ -z "$best" ] && return
-#
-#	band=$1
-#	sec=""
-#	prio=""
-#
-#	config_foreach mapagent_enable_best bk-iface $best
-#	uci commit mapagent
-	config_load mapagent
-
-	diff=$(config_foreach mapagent_bsta_to_wireless bk-iface)
-
-#	[ "$diff" != "" ] && {
-		ubus call uci commit '{"config":"wireless"}'
-#	}
-}
-
-
-sync_mapcontroller_from_wireless() {
-	ubus -t 5 wait_for wifi
-	[ "$?" != "0" ] && return
-
-	[ ! -f "/etc/config/wireless" ] && return
-
-	status=$(ubus -S call wifi status)
-
-	device_to_band() {
-		local ifname=$1
-		json_load "$status"
-		json_select "radios"
-		json_get_keys keys
-
-		for key in $keys; do
-			json_select $key
-			json_get_var name name
-
-			if [ "$name" != "$ifname" ]; then
-				json_select ..
-				continue
-			fi
-
-			json_get_var band band
-
-			if [ "$band" == "5GHz" ]; then
-				echo "5"
-			elif [ "$band" == "2.4GHz" ]; then
-				echo "2"
-			fi
-
-			break
-		done
-
-		json_cleanup
-	}
-
-	wireless_process_iface() {
-		local section=$1
-		local type="ap"
-		local enabled="1"
-
-		config_get multi_ap $section multi_ap 0
-		[ "$multi_ap" != "1" ] && [ "$multi_ap" != "2" ] && return
-
-		config_get mode $section mode "ap"
-		[ "$mode" != "ap" ] && return
-
-		config_get device $section device
-		band=$(device_to_band $device)
-		[ "$band" == "" ] && return
-
-		config_get ssid $section ssid
-		config_get key $section key
-		config_get encryption $section encryption
-		config_get start_disabled $section start_disabled "0"
-		config_get network $section network
-
-
-		cntlr_section=$(uci add mapcontroller ${type})
-		uci -q set mapcontroller.${cntlr_section}.ssid="$ssid"
-		uci -q set mapcontroller.${cntlr_section}.key="$key"
-		uci -q set mapcontroller.${cntlr_section}.encryption="$encryption"
-		uci -q set mapcontroller.${cntlr_section}.band="$band"
-		uci -q set mapcontroller.${cntlr_section}.vid="1"
-		uci -q set mapcontroller.${cntlr_section}.network="$network"
-
-		[ "$multi_ap" == "1" ] && map_type="backhaul" || map_type="fronthaul"
-		uci -q set mapcontroller.${cntlr_section}.type="$map_type"
-
-		[ "$start_disabled" == "1" ] && enabled="0"
-		uci -q set mapcontroller.${cntlr_section}.enabled="$enabled"
-	}
-
-	mapcontroller_teardown() {
-		local section=$1
-
-		uci delete mapcontroller.$1
-	}
-
-	config_load mapcontroller
-	config_foreach mapcontroller_teardown ap
-
-	config_load wireless
-	config_foreach wireless_process_iface wifi-iface
-	uci commit mapcontroller
-}
-
-bsta_scan_on_enabled() {
-	config_load mapagent
-
-	mapagent_enable_bk() {
-		config_get ifname $1 ifname
-		config_get enabled $1 enabled
-
-		echo ifname $ifname enabled $enabled
-
-		[ "$enabled" = "0" ] && return
-
-		wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
-		wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
-	}
-
-	config_foreach mapagent_enable_bk bk-iface
-}
-
-bsta_enable_all() {
-	mapagent_enable_bk() {
-		config_get ifname $1 ifname "2"
-		uci -q set mapagent.$1.enabled="1"
-	}
-
-	config_load mapagent
-
-	config_foreach mapagent_enable_bk bk-iface
-	uci commit mapagent
-	bsta_scan_on_enabled
-}
-
-bsta_disable_lower_priority() {
-	config_load mapagent
-
-	mapagent_get_priority() {
-		config_get ifname $1 ifname
-
-		[ "$ifname" != "$2" ] && return
-
-		config_get priority $1 priority "2"
-
-		echo "$priority"
-	}
-
-	mapagent_disable_lower_bk() {
-		mapagent_apply_wl_bsta() {
-			apply_config() {
-				local section="$1"
-				local bsta="$2"
-				local enabled="$3"
-
-				config_get ifname $section ifname
-
-				[ "$bsta" == "$ifname" ] || return
-
-				[ "$enabled" != "0" ] && return
-
-				wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
-				wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
-				wpa_cli -i "$ifname" save_config > /dev/null 2>&1
-			}
-			local ifname="$1"
-			local enabled="$2"
-
-			[ "$enabled" != "0" ] && return
-
-			config_load wireless
-
-			config_foreach apply_config wifi-iface $ifname $enabled
-		}
-
-		local enabled="1"
-
-		config_get ifname $1 ifname
-		config_get priority $1 priority
-
-		[ "$ifname" != "$2" -a "$priority" -gt "$3" ] && enabled="0"
-
-		uci -q set mapagent.$1.enabled="$enabled"
-
-		echo $(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
-	}
-
-	local bsta=$1
-
-	prio=$(config_foreach mapagent_get_priority bk-iface $bsta)
-	#echo bsta $bsta has prio $prio > /dev/console
-
-	config_foreach mapagent_disable_lower_bk bk-iface $bsta $prio
-	uci commit mapagent
-
-#	ubus call uci commit '{"config":"wireless"}'
-}
-
-
-bsta_use_link() {
-	config_load mapagent
-
-	mapagent_disable_bk() {
-		local bsta="$2"
-
-		config_get ifname $1 ifname
-		config_get enabled $1 enabled
-
-		[ "$bsta" = "$ifname" ] && return
-
-		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
-		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
-	}
-
-	local bsta=$1
-
-	config_foreach mapagent_disable_bk bk-iface $bsta
-}
-
-bsta_swap_to_link() {
-	bsta_disable_lower_priority $1
-	bsta_use_link $1
-
-	wpa_cli -i "$1" enable_network 0 > /dev/null
-	wpa_cli -i "$1" reconnect > /dev/null
-	wpa_cli -i "$1" save_config > /dev/null
-}
-
-
-func=$1
-shift
-
-case "$func" in
-	wireless_teardown) brcm_wireless_teardown;;
-	setup_network) brcm_setup_network;;
-	setup_wireless) brcm_setup_wireless;;
-	write_credentials) brcm_write_credentials;;
-	sync_credentials) brcm_sync_credentials;;
-	bsta_steer) bsta_steer $@;;
-	set_network) brcm_set_network $@;;
-	write_bsta_config) write_bsta_config $@;;
-	teardown_iface) brcm_teardown_iface $@;;
-	bsta_to_wireless) brcm_bsta_to_wireless $@;;
-	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
-	ts) ts_sub $@;;
-	bsta_enable_all) bsta_enable_all $@;;
-	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;
-	bsta_scan_on_enabled) bsta_scan_on_enabled $@;;
-	bsta_use_link) bsta_use_link $@;;
-	bsta_swap_to_link) bsta_swap_to_link $@;;
-	--help|help) usage;;
-	*) usage; exit 1;;
-esac
-

map-agent/files/lib/wifi/traffic_separation

@@ -1,381 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-### Traffic Separation ###
-
-ts_sub() {
-
-	ts_usage() {
-		cat <<EOF
-Usage: $0 [create|delete|populate]
-Traffic Separation related functions.
-create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
-create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
-create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethernet interface
-delete <iface>				- delete vlan device
-populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
-primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
-     
-EOF
-	exit 1
-	}
-
-	_get_bridge() {
-		local bridge=$(ip link show $1 | grep -o "master [^\s]*" | cut -d ' ' -f 2)
-		echo $bridge
-	}
-
-	ts_create() {
-
-		_create_vlan_dev() {
-			iface=$1				# real iface
-			vid=$2					# Vlan ID
-			bridge="$(_get_bridge $iface)"		# bridge iface is connected to
-			vlan_dev=${iface}_vlan${vid}		# name of vlan device to create
-
-			# remove interface from bridge if it is in one
-			[ -n "$bridge" ] && brctl delif $bridge $iface &> /dev/null
-
-			# create vlan device
-			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
-
-			# bring the vlan device up and add back to bridge if it was in one
-			[ -n "$bridge" ] && brctl addif $bridge $vlan_dev &> /dev/null
-			ip link set dev $vlan_dev up
-
-			echo $vlan_dev
-		}
-
-		ts_create_fh() {
-			iface=$1				# fh iface
-			vid=$2					# SSID specific (secondary) or primary vid
-
-			[ -n "$iface" ] && [ -n "$vid" ] || {
-				cat <<EOF
-Adding FH device requires IFACE and VID.
-EOF
-				exit 1
-			}
-
-			# create vlan device
-			vlan_dev=$(_create_vlan_dev $iface $vid)
-
-			# add rules
-			# Note: removing these for now since these packets are read directly from the iface anyway
-#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x888e --set-rxif $vlan_dev --rule-append		# incoming EAPOL
-#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
-			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
-			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
-		}
-
-# Note: Currently not used (will be needed for Profile 1)
-		ts_create_bh() {
-			iface=$1				# bh iface
-			vid=$2					# primary vid
-			profile=$3				# agent profile (1 or 2)
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
-				cat <<EOF
-Adding BH device requires IFACE, VID and PROFILE (1 or 2).
-EOF
-				exit 1
-			}
-
-			# create vlan device
-			vlan_dev=$(_create_vlan_dev $iface $vid)
-
-			# add rules
-			case "$profile" in
-				1 | profile_1 | profile1 | Profile_1 | Profile1)
-					vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
-					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --pop-tag --rule-append
-					;;
-				2 | profile_2 | profile2 | Profile_2 | Profile2)
-					vlanctl --if $iface --rx --tags 1 --set-rxif $vlan_dev --rule-append
-					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --rule-append								# note: already default
-					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x893a --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing IEEE1905.1
-					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x888e --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing EAPOL
-					;;
-				*)
-					ts_delete $iface
-					ts_usage
-					exit 1
-					;;
-			esac
-		}
-
-		ts_create_bh_drv() {
-			iface=$1				# bh iface
-			vid=$2					# primary vid
-			profile=$3				# agent profile (1 or 2)
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
-				cat <<EOF
-Adding BH device requires IFACE, VID and PROFILE (1 or 2).
-EOF
-				exit 1
-			}
-
-			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
-			wl -i $iface down &> /dev/null
-			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
-			wl -i $iface map_8021q_settings $vid &> /dev/null	# can only be set on bBSS (read-only on bSTA)
-			wl -i $iface up &> /dev/null
-		}
-
-		ts_create_eth() {
-
-			_ts_setup() {
-				vlan_bridge=$1
-				lan_bridge=$2
-				vlan_dev=$3
-				lan_dev=${vlan_dev}_lan
-
-				ip link show $vlan_dev &> /dev/null || ip link add $vlan_dev type veth peer name $lan_dev
-				brctl addif $vlan_bridge $vlan_dev &> /dev/null
-				brctl addif $lan_bridge $lan_dev &> /dev/null
-				ip link set $vlan_dev up
-				ip link set $lan_dev up
-			}
-
-			iface=$1				# Multi-AP Logical Ethernet Interface
-			vid=$2					# primary vid
-			pbits=$3				# default pbits to apply
-			vlan_bridge=$4				# name of ts subsystem bridge
-			lan_bridge=$5				# name of node local bridge
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
-				cat <<EOF
-Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
-EOF
-				exit 1
-			}
-
-			# create virtual eth device between bridges (if it doesn't exist))
-			_ts_setup $vlan_bridge $lan_bridge $iface
-
-			# create vlan device
-			vlan_dev=$(_create_vlan_dev $iface $vid)
-
-			# TODO: how to disable returning traffic back to incoming interface?
-
-			# add rules
-			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
-			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
-		}
-
-		ts_create_dhcp() {
-			_br_setup() {
-				local name=$1
-				local sinkname=$2
-				local vid=$3
-				local diff=""
-
-				[ -z "$(uci -q get network.${name}_dev)" ] && {
-					uci -q set network.${name}_dev="device"
-					uci -q set network.${name}_dev.name="br-${name}"
-					uci -q set network.${name}_dev.type="bridge"
-					uci -q set network.${name}_dev.bridge_empty="1"
-					uci -q add_list network.${name}_dev.ports="${sinkname}"
-
-					diff="1"
-				}
-
-				[ -z "$(uci -q get network.${name})" ] && {
-					uci -q set network.${name}="interface"
-					uci -q set network.${name}.device="br-${name}"
-					uci -q set network.${name}.is_lan="1"
-					uci -q set network.${name}.proto="static"
-					uci -q set network.${name}.ipaddr="192.168.${vid}.1"
-					uci -q set network.${name}.netmask="255.255.255.0"
-
-					diff="1"
-				}
-
-				[ "$diff" = "1" ] && {
-					uci -q commit network
-					ubus call network reload
-					ubus -t 5 wait_for network.device
-				}
-			}
-
-			_dhcp_setup() {
-				local name=$1
-
-				[ -n "$(uci -q get dhcp.${name})" ] && return
-
-				uci -q set dhcp.${name}=dhcp
-				uci -q set dhcp.${name}.interface="${name}"
-				uci -q set dhcp.${name}.start="100"
-				uci -q set dhcp.${name}.limit="150"
-				uci -q set dhcp.${name}.leasetime="1h"
-				uci -q set dhcp.${name}.dhcpv4="server"
-				uci -q set dhcp.${name}.dhcpv6="server"
-				uci -q set dhcp.${name}.ra="server"
-				uci -q set dhcp.${name}.ra_slaac="1"
-				uci -q add_list dhcp.${name}.ra_flags="managed-config"
-				uci -q add_list dhcp.${name}.ra_flags="other-config"
-
-				uci -q commit dhcp
-				ubus call uci commit '{"config":"dhcp"}'
-			}
-
-			_wan_setup() {
-				local name=$1
-
-				config_load firewall
-
-				_process_zone() {
-					local section=$1
-					local sink=$2
-					local name
-					local exists=false
-
-					config_get name $section name
-
-					[ "$name" == "lan" ] || return
-
-					_process_list() {
-						local value=$1
-
-						[ "$value" == "$sink" ] && exists=true && return 1
-					}
-
-					config_list_foreach "$section" network _process_list 
-
-					[ $exists = false ] && {
-						uci -q add_list firewall.${section}.network="${sink}"
-						uci -q commit firewall
-						ubus call uci commit '{"config":"firewall"}'
-					}
-
-					return 1
-				}
-
-				config_foreach _process_zone zone $name
-			}
-
-			vid=$1					# primary vid
-
-			[ -n "$vid" ] || {
-				cat <<EOF
-VID required to configure DHCP.
-EOF
-				exit 1
-			}
-
-			br_dev=sink_vlan${vid}			# name of vlan device to create
-
-
-			ip l a sink1_vlan${vid} type veth peer name sink2_vlan${vid}
-			vlanctl --mcast --if-create-name sink2_vlan${vid} sink3_vlan${vid} --if sink2_vlan${vid} --set-if-mode-rg
-			vlanctl --if sink2_vlan${vid} --rx --tags 1 --filter-vid ${vid} 0 --set-rxif sink3_vlan${vid} --pop-tag --rule-append
-			vlanctl --if sink2_vlan${vid} --tx --tags 0 --filter-txif sink3_vlan${vid} --push-tag --set-vid ${vid} 0 --rule-append
-			ip l s sink1_vlan${vid} up
-			ip l s sink2_vlan${vid} up
-			ip l s sink3_vlan${vid} up
-
-			_br_setup $br_dev sink3_vlan${vid} $vid
-			_dhcp_setup $br_dev
-			_wan_setup $br_dev
-		}
-
-	local type=$1
-	shift
-
-	case "$type" in
-		fh) ts_create_fh $@;;
-#		bh) ts_create_bh $@;;
-		bh) ts_create_bh_drv $@;;
-		eth) ts_create_eth $@;;
-		dhcp) ts_create_dhcp $@;;
-		--help|help) ts_usage;;
-		*) ts_usage; exit 1;;
-	esac
-	}
-
-	ts_delete() {
-		iface=$1
-
-		path=$(ls -d /sys/class/net/${iface}/upper_*)
-		[ -z "$path" ] && exit 0
-		vlan_dev=${path##*upper_}
-		bridge="$(_get_bridge $vlan_dev)"
-
-		vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
-
-		brctl addif $bridge $iface &> /dev/null
-	}
-
-	ts_populate() {
-		local type=$1
-		shift
-
-		[ "$type" == "eth" ] || {
-			cat <<EOF
-Populating ETH rules requires IFACE and VID.
-EOF
-			exit 1
-		}
-
-		iface=$1				# Multi-AP Logical Ethernet Interface
-		vid=$2					# secondary vid
-
-		path=$(ls -d /sys/class/net/${iface}/upper_*)
-		[ -z "$path" ] && exit 1
-		vlan_dev=${path##*upper_}
-
-		# add rules
-		vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
-		vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
-	}
-
-	ts_primary() {
-		local func=$1
-		shift
-
-		case "$func" in
-			get) vid=$(wl -i $1 map_8021q_settings); echo ${vid##* };;
-			*) ts_usage; exit 1;;
-		esac
-	}
-
-	ts_unicast() {
-		local mac=$1
-		local iface=$2
-
-		# TODO: improve?
-		res=$(ebtables -t broute -L | grep -i "$mac" | grep "$iface")
-		[ -n "$res" ] && return
-
-		ebtables -t broute -D BROUTING -d "$mac" -p 0x893a -j DROP
-		ebtables -t broute -I BROUTING -i "$iface" -d "$mac" -p 0x893a -j DROP
-	}
-
-	ts_multicast() {
-		local iface=$1
-
-		# TODO: improve?
-		res=$(ebtables -t broute -L | grep -i "1:80:C2:00:00:13" | grep "$iface")
-		[ -n "$res" ] && return
-
-		ebtables -t broute -D BROUTING -d 01:80:C2:00:00:13 -p 0x893a -j DROP
-		ebtables -t broute -D BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
-		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
-	}
-
-	local func=$1
-	shift
-
-	case "$func" in
-		create) ts_create $@;;
-		delete) ts_delete $@;;
-		populate) ts_populate $@;;
-		primary) ts_primary $@;;
-		unicast) ts_unicast $@;;
-		multicast) ts_multicast $@;;
-		--help|help) ts_usage;;
-		*) ts_usage; exit 1;;
-	esac
-}

map-controller/Makefile

@@ -5,28 +5,25 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=5.1.1
+PKG_VERSION:=2.4.12
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=234cff05ee7987f50e3d5e76d920f59f9c680212
+PKG_SOURCE_VERSION:=e4d286f6348519de2613d4ba3548ec811c60ad7b
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-controller
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/map-controller.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 
-
-PKG_BUILD_DEPENDS:=map-plugin
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-controller
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=WiFi Multi-AP Controller (EasyMesh R2)
-  DEPENDS:=+libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 +map-plugin
+  DEPENDS:=+libuci +libubox +ubus +libmaputils +libwsc +libeasy
 endef
 
 define Package/map-controller/description

map-controller/files/etc/config/mapcontroller

@@ -2,66 +2,43 @@ config controller 'controller'
 	option enabled '1'
 	option registrar '5 2'	    #bands on which wps registrar supported
 	option debug '6'
-	option enable_sta_steer '0'
-	option enable_bsta_steer '0'
-	option primary_vid '1'
-	option primary_pcp '0'
+	option al_bridge 'br-lan'
 
-config interface 'lan'
-	option 'dhcp'
+config vlan 'lan'
+	option network 'lan'
+	option id '1'
 
-config ap
+config fh-credentials
 	option band '5'
-	option encryption 'sae-mixed'
+	option encryption 'psk2'
 	option key '1234567890'
 	option ssid 'map-net5'
-	option vid '1'
-	option type 'fronthaul'
-	option network 'lan'
+	option vlan '1'
 
-config ap
+config fh-credentials
 	option band '2'
-	option encryption 'sae-mixed'
+	option encryption 'psk2'
 	option key '1234567890'
 	option ssid 'map-net2'
-	option vid '1'
-	option type 'fronthaul'
-	option network 'lan'
+#	option bk_ssid 'multiap_ssid123'
+#	option bk_key 'multiap_key123'
+	option vlan '1'
 
-config ap
+config bk-credentials
 	option band '5'
-	option encryption 'sae'
+	option encryption 'psk2'
 	option key '5555555555'
 	option ssid 'map-bkhaul-5'
-	option type 'backhaul'
+	option multi_ap '2'
 	option disallow_bsta '1'		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)
-	option vid '1'
-	option network 'lan'
+	option vlan '1'
 
-config ap
+
+config bk-credentials
 	option band '2'
-	option encryption 'sae'
+	option encryption 'psk2'
 	option key '2222222222'
 	option ssid 'map-bkhaul-2'
-	list disallow_bsta '0'                # 0 or 1 profile-1 bSTA
-	option vid '1'
-	option type 'backhaul'
-	option network 'lan'
-
-config policy 'policy'
-	list steer_exclude '00:11:22:33:44:55'
-	list steer_exclude_btm '00:aa:bb:cc:dd:ee'
-	option steer_policy '2'                    # 0, 1, 2 - see MultiAP spec
-	option util_threshold '200'                # channel-util as in BSS load
-	option rcpi_threshold '30'                 # 0 - 220 valid range
-	option report_scan '0'                     # 0 or 1 for independent scans
-	option report_sta_assocfails '1'           # 0 or 1 - stas assoc failure
-	option report_sta_assocfails_rate '2'      # reporting rate for STA assoc fails (attempts per minute)
-	option report_metric_periodic '0'          # 0, or 1 - 255 in secs
-	option report_rcpi_threshold '0'           # 0, or 1 - 220
-	option report_util_threshold '0'           # 0, or  channel-util value
-	option rcpi_hysteresis_margin '0'          # 0, or > 0 - hysteresis margin
-	option include_sta_stats '0'               # sta stats in AP metric resp
-	option include_sta_metric '0'              # sta metric in AP metric resp
-	option disallow_bsta_p1 '0'                # 0 or 1 profile-1 bSTA
-	option disallow_bsta_p2 '0'                # 0 or 1 profile-2 bSTA
+	option multi_ap '2'
+	option disallow_bsta '0'                # 0 or 1 profile-1 bSTA
+	option vlan '1'

map-controller/files/etc/init.d/mapcontroller

@@ -14,6 +14,7 @@ handle_controller_select() {
 
 start_service() {
 	local enabled
+	local local_ctrl=0
 
 	config_load "mapcontroller"
 	config_get_bool enabled controller enabled 1
@@ -22,13 +23,9 @@ start_service() {
 	procd_open_instance
 	procd_set_param command "/usr/sbin/mapcontroller" "-d"
 
-	if [ -f /etc/config/mapagent ]; then
-	        local local_ctrl=0
-
-	        config_load "mapagent"
-	        config_foreach handle_controller_select controller_select
-	        [ "$local_ctrl" -eq 0 ] && procd_append_param command "-w"
-	fi
+	config_load "mapagent"
+	config_foreach handle_controller_select controller_select
+	[ "$local_ctrl" -eq 0 ] && procd_append_param command "-w"
 
 	procd_set_param respawn
 #	procd_set_param stdout 1
@@ -48,8 +45,6 @@ reload_service() {
 	config_get_bool enabled controller enabled 1
 	if [ "$enabled" -eq 0 ]; then
 		stop
-		# Start but without instance so reload trigger works.
-		start
 		return
 	fi
 

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=3.0.4
+PKG_VERSION:=1.5.22
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=5763d405ed896140f5ca5ed9073b98d4bb728b14
+PKG_SOURCE_VERSION:=f10842f576fc29f6c3145a4b4b0efcb931d0e643
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
@@ -25,7 +25,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/map-topology
 	CATEGORY:=Utilities
 	DEPENDS:=+libubox +ubus +libpthread +libuci +libeasy \
-		+libieee1905 +map-plugin +libavahi-nodbus-support
+		+libieee1905 +libavahi-nodbus-support
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 

map-topology/files/etc/config/hosts

@@ -1,4 +0,0 @@
-
-config global 'global'
-	option ageing_timer '1440'
-	option reboot_persistent '0'

mcastmngr/Makefile

@@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mcastmngr
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.0
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 

mcastmngr/files/etc/uci-defaults/61-mcast_config_generate

@@ -22,7 +22,7 @@ generate_igmp_global_params(){
 
 generate_mcast_config(){
 
-	up_itf="$(uci -q get network.wan.device)"
+	up_itf="$(uci -q get network.wan.ifname)"
 
 	uci add mcast proxy
 	uci rename mcast.@proxy[-1]="igmp_proxy_1"
@@ -35,6 +35,7 @@ generate_mcast_config(){
 	uci set mcast.@proxy[-1].last_member_query_interval="10"
 	uci set mcast.@proxy[-1].fast_leave="1"
 	uci set mcast.@proxy[-1].snooping_mode="2"
+	uci set mcast.@proxy[-1].lan_to_lan="0"
 	uci add_list mcast.@proxy[-1].downstream_interface="br-lan"
 
 	IFS=" "

mcastmngr/files/lib/mcast/broadcom.sh

@@ -60,6 +60,7 @@ mld_p_down_interfaces=""
 mld_p_exceptions=""
 
 # Standard parameters need by BCM's multicast daemon
+l_2_l_mcast=0
 allow_brdevice=0
 
 proxdevs=""
@@ -88,6 +89,7 @@ read_snooping() {
 		config_get igmp_s_mode "$config" snooping_mode 0
 		config_get igmp_s_iface "$config" interface
 		config_get igmp_s_exceptions "$config" filter
+		config_get l_2_l_mcast "$config" lan_to_lan
 		return
 	fi
 
@@ -102,6 +104,7 @@ read_snooping() {
 		config_get mld_s_mode "$config" snooping_mode 0
 		config_get mld_s_iface "$config" interface
 		config_get mld_s_exceptions "$config" filter
+		config_get l_2_l_mcast "$config" lan_to_lan
 		return
 	fi
 }
@@ -130,6 +133,7 @@ read_proxy() {
 		config_get igmp_p_up_interfaces "$config" upstream_interface
 		config_get igmp_p_down_interfaces "$config" downstream_interface
 		config_get igmp_p_exceptions "$config" filter
+		config_get l_2_l_mcast "$config" lan_to_lan
 		return
 	fi
 
@@ -145,6 +149,7 @@ read_proxy() {
 		config_get mld_p_up_interfaces "$config" upstream_interface
 		config_get mld_p_down_interfaces "$config" downstream_interface
 		config_get mld_p_exceptions "$config" filter
+		config_get l_2_l_mcast "$config" lan_to_lan
 		return
 	fi
 }
@@ -182,6 +187,8 @@ config_snooping_on_bridge() {
 			br-*)
 				# set snooping mode on the bridge
 				bcmmcastctl mode -i $snpif -p $bcm_mcast_p -m $3
+				# set L2L snooping mode on the bridge
+				bcmmcastctl l2l -i $snpif -p $bcm_mcast_p -e $l_2_l_mcast # set L2L snooping mode on the bridge
 			;;
 		esac
 	done
@@ -343,6 +350,7 @@ disable_snooping() {
 
 	for br in $(brctl show | grep 'br-' | awk '{print$1}' | tr '\n' ' '); do
 		bcmmcastctl mode -i $br -p $bcm_mcast_p -m 0 # disable snooping on all bridges
+		bcmmcastctl l2l -i $br -p $bcm_mcast_p -e 0 # disable L2L snooping on all bridges
 	done
 }
 

obudpst/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (c) 2020, Broadband Forum
-# Copyright (c) 2020, AT&T Communications
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=obudpst
-PKG_VERSION:=7.2.1
-PKG_SOURCE_VERSION:=9c448095c9773bd7e5cea143af07817ad9f3c6ba
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/BroadbandForum/obudpst.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/obudpst
-	CATEGORY:=Utilities
-	DEPENDS+=+libopenssl
-	TITLE:=Open Broadband-UDP Speed Test (OB-UDPST)
-endef
-
-define Build/Install
-	:
-endef
-
-define Package/obudpst/description
-	Open Broadband-UDP Speed Test (OB-UDPST) is a client/server software utility to demonstrate
-	one approach of doing IP capacity measurements described by Broadband Forum TR-471.
-endef
-
-define Package/obudpst/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/udpst $(1)/usr/sbin/udpst
-endef
-
-$(eval $(call BuildPackage,obudpst))

obuspa/Config.in

@@ -1,7 +1,5 @@
 if PACKAGE_obuspa
 
-menu "Configuration"
-
 config OBUSPA_MTP_ENABLE_STOMP
 	bool "Enable STOMP as mtp protocol"
 	default y
@@ -13,5 +11,5 @@ config OBUSPA_MTP_ENABLE_MQTT
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
 	default y
-endmenu
+
 endif

obuspa/Makefile

@@ -5,15 +5,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=4.1.0.9
+PKG_VERSION:=3.0.0.32
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a52205791ef71cb54fa468064075ff85c7f5a638
+PKG_SOURCE_VERSION:=7afcb04746566f19478dfdb5dd922d57d9e60166
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -29,9 +29,9 @@ include $(INCLUDE_DIR)/package.mk
 define Package/obuspa
   SECTION:=utils
   CATEGORY:=Utilities
-  SUBMENU:=TRx69
   TITLE:=USP agent
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto
+  PKG_BUILD_DEPENDS:=+openssl +ubus +sqlite3 +curl +ubox +uci
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +libmosquitto +uspd +libuci
 endef
 
 define Package/obuspa/description
@@ -86,7 +86,6 @@ define Package/obuspa/install
 	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
 	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
 	$(INSTALL_DATA) ./files/etc/obuspa/roles.json $(1)/etc/obuspa/roles.json
-	$(INSTALL_DATA) ./files/etc/obuspa/dmcaching_exclude.json $(1)/etc/obuspa/dmcaching_exclude.json
 	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-obuspa $(1)/etc/hotplug.d/iface/
 endef
 

obuspa/files/etc/config/obuspa

@@ -5,8 +5,7 @@ config obuspa 'global'
 	option debug '0'
 	option log_level '1'
 	#option db_file '/etc/obuspa/usp.db'
-	#option role_file '/etc/obuspa/roles.json'
-	option dm_caching_exclude '/etc/obuspa/dmcaching_exclude.json'
+	option role_file '/etc/obuspa/roles.json'
 	#option trust_cert '/etc/obuspa/rootCA.pem'
 	#option client_cert '/etc/obuspa/client.pem'
 	#option log_dest '/var/log/obuspa'
@@ -20,7 +19,7 @@ config controller 'localcontroller'
 	option Protocol 'MQTT'
 	option Topic '/usp/controller'
 	option mqtt 'localmqtt'
-	option assigned_role_name 'full_access'
+	option assigned_role_name 'Full Access'
 
 # Adds Device.LocalAgent.MTP.
 config mtp
@@ -33,6 +32,8 @@ config mqtt 'localmqtt'
 	option BrokerAddress '127.0.0.1'
 	option BrokerPort '1883'
 	option TransportProtocol 'TCP/IP'
+	option Username 'admin'
+	option Password 'admin'
 
 # Add Device.LocalAgent.Subscription.
 config subscription
@@ -42,18 +43,18 @@ config subscription
 	option Persistent 'true'
 	option controller 'localcontroller'
 
-#config challenge 'admin'
-#	option Description 'Request to get Administrative access'
-#	option role_name 'full_access'
-#	option Enable '1'
-#	option Value 'admin'
-#	option Retries 2
-#	option LockoutPeriod 60
+config challenge 'admin'
+	option Description 'Request to get Administrative access'
+	option role_name 'Full Access'
+	option Enable '1'
+	option Value 'admin'
+	option Retries 2
+	option LockoutPeriod 60
 
-#config challenge 'user'
-#	option Description 'Request to get User access'
-#	option role_name 'user'
-#	option Enable '1'
-#	option Value 'user'
-#	option Retries 3
-#	option LockoutPeriod 30
+config challenge 'user'
+	option Description 'Request to get User access'
+	option role_name 'user'
+	option Enable '1'
+	option Value 'user'
+	option Retries 3
+	option LockoutPeriod 30

obuspa/files/etc/hotplug.d/iface/85-obuspa

@@ -5,7 +5,5 @@
 [ "$ACTION" = ifup -o "$ACTION" = ifupdate ] || exit 0
 [ "$ACTION" = ifupdate -a -z "$IFUPDATE_ADDRESSES" ] && exit 0
 
-echo "Restarting obuspa"|logger -t obuspa.hotplug -p debug
-
 /etc/init.d/obuspa reload
 

obuspa/files/etc/init.d/obuspa

@@ -1,12 +1,14 @@
 #!/bin/sh /etc/rc.common
 
 START=99
-STOP=2
 USE_PROCD=1
 PROG=/usr/sbin/obuspa
 
-CONFIGURATION=obuspa
+EXTRA_COMMANDS="remove_db"
+EXTRA_HELP="	remove_db Removes obuspa persistent db before restarting, self trigger with uci change"
+
 PARAM_FILE="/tmp/obuspa_param_reset.txt"
+CONFIGURATION=obuspa
 KEEP_FILES="/lib/upgrade/keep.d/obuspa"
 USP_TEMP_FILE="/tmp/usp.tmp"
 controller_num=0
@@ -17,7 +19,6 @@ subs_num=0
 challenge_num=0
 index=0
 role_def_file=""
-PROFILE="/root/.profile"
 
 . /lib/functions/network.sh
 . /usr/share/libubox/jshn.sh
@@ -31,7 +32,7 @@ cleanup() {
 trap cleanup EXIT
 
 log() {
-	echo "${@}"|logger -t obuspa.init -p debug
+	echo "${@}"|logger -t obuspa -p debug
 }
 
 db_set() {
@@ -42,19 +43,6 @@ db_set() {
 	fi
 }
 
-update_keep() {
-	keep_file=${1}
-
-	if [ -z "${keep_file}" ]; then
-		return;
-	fi
-
-	grep -q "${keep_file}" ${KEEP_FILES}
-	if [ "$?" -ne 0 ]; then
-		echo ${keep_file} >> ${KEEP_FILES}
-	fi
-}
-
 get_index() {
 	index=$(( index + 1 ))
 	if [ "$1" = "$2" ]; then
@@ -64,35 +52,33 @@ get_index() {
 
 get_role_index_from_json() {
 	local role="${@}"
-	local num=0
 
 	# In case of role is empty or file not present
 	if [ -z "${role}" -o ! -f ${role_def_file} ]; then
+		echo 0
 		return 0
 	fi
 
 	json_init
 	json_load_file ${role_def_file}
+	if [ $? -ne 0 ]; then # In case of invalid json file
+		echo 0
+		return 0
+	fi
 
 	json_select roles
 	json_get_keys roles_obj
 
 	for k in ${roles_obj}; do
-		local rname
 		json_select $k
-		json_get_var rname name
+		json_get_var name name
 		json_select ..
-
-		if [ "${rname}" != "Untrusted" -a "${rname}" != "full_access" ]; then
-			num=$(( num + 1 ))
-		fi
-
-		if [ "${role}" = "${rname}" ]; then
-			return ${num}
+		if [ "${role}" = "${name}" ]; then
+			echo "${k}"
+			return 0
 		fi
 	done
-
-	return 0
+	echo 0
 }
 
 get_uci_ref_index() {
@@ -121,11 +107,11 @@ validate_obuspa_section()
 		'trust_cert:file' \
 		'client_cert:file' \
 		'interface:string' \
-		'ifname:string:br-lan' \
+		'ifname:string:"br-lan"' \
 		'debug:bool:false' \
 		'log_level:uinteger' \
-		'log_dest:string' \
-		'db_file:string' \
+		'log_dest:file' \
+		'db_file:file' \
 		'role_file:file'
 }
 
@@ -228,7 +214,7 @@ configure_localagent() {
 
 	validate_localagent_section 'localagent' || {
 		log "Validation of localagent section failed"
-		return 1;
+		exit 1;
 	}
 
 	if [ -n "${EndpointID}" ]; then
@@ -253,7 +239,7 @@ configure_controller() {
 
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
-		return 1;
+		exit 1;
 	}
 
 	if [ -z "${EndpointID}" -o -z "${Protocol}" ]; then
@@ -286,7 +272,6 @@ configure_controller() {
 
 	controller_num=$(( controller_num + 1 ))
 
-	db_set Device.LocalAgent.Controller.${controller_num}.Alias "cpe-${controller_num}"
 	db_set Device.LocalAgent.Controller.${controller_num}.Enable "${Enable}"
 	db_set Device.LocalAgent.Controller.${controller_num}.EndpointID "${EndpointID}"
 	if [ -n "${AssignedRole}" ]; then
@@ -308,7 +293,6 @@ configure_controller() {
 	db_set Device.LocalAgent.Controller.${controller_num}.USPNotifRetryIntervalMultiplier "${USPNotifRetryIntervalMultiplier}"
 	db_set Device.LocalAgent.Controller.${controller_num}.ControllerCode "${ControllerCode}"
 
-	db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.Alias "cpe-${controller_num}"
 	db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.Enable "${Enable}"
 	db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.Protocol "${Protocol}"
 	# only support configuration of one mtp path per controller using uci
@@ -335,7 +319,7 @@ configure_subscription(){
 
 	validate_subscription_section "${1}" || {
 		log "Validation of subscription section failed"
-		return 1;
+		exit 1;
 	}
 
 	if [ -z "${Recipient}" -a -z "${controller}" ]; then
@@ -353,7 +337,6 @@ configure_subscription(){
 
 	subs_num=$(( subs_num + 1))
 
-	db_set Device.LocalAgent.Subscription.${subs_num}.Alias "cpe-${subs_num}"
 	db_set Device.LocalAgent.Subscription.${subs_num}.Enable "${Enable}"
 	db_set Device.LocalAgent.Subscription.${subs_num}.ID "${ID}"
 	db_set Device.LocalAgent.Subscription.${subs_num}.NotifType "${NotifType}"
@@ -375,45 +358,24 @@ validate_challenge_section()
 		'LockoutPeriod:uinteger:0'
 }
 
-check_json_load()
-{
-	local ret=0
-	if [ -f ${role_def_file} ]; then
-		json_init
-		json_load_file ${role_def_file} 2>&1 |grep -q Failed
-		if [ $? -eq 0 ]; then # In case of invalid json file
-			log "failed to load [${role_def_file}]"
-			ret=1
-		fi
-	fi
-	json_init
-	return ${ret}
-}
-
 get_role_index() {
 	local role="Device.LocalAgent.ControllerTrust.Role"
-	local idx=0
+	local index=0
 	local role_name="${@}"
 
 	case "${role_name}" in
-	'full_access')
-		idx=1;
-		;;
+	'Full Access')
+	     index=1;
+	     ;;
 	'Untrusted')
-		idx=2;
-		;;
+	     index=2;
+	     ;;
 	 *)
-		local ji=0
-
-		check_json_load
-		if [ $? -eq 0 ]; then
-			get_role_index_from_json ${role_name}
-			ji=$?
-		fi
-		idx=$(( ji + 2 )) # Add predefined roles
+	     local ji=$(get_role_index_from_json ${role_name})
+	     index=$(( ji + 2 )) # Add predefined roles
 	 esac
 
-	 echo "${role}.${idx}"
+	 echo "${role}.${index}"
 }
 
 configure_challenges() {
@@ -457,7 +419,7 @@ configure_mtp() {
 
 	validate_mtp_section "${1}" || {
 		log "Validation of mtp section failed"
-		return 1;
+		exit 1;
 	}
 
 	if [ -z ${Reference} ]; then
@@ -479,7 +441,6 @@ configure_mtp() {
 	fi
 	mtp_num=$(( mtp_num + 1 ))
 
-	db_set Device.LocalAgent.MTP.${mtp_num}.Alias "cpe-${mtp_num}"
 	db_set Device.LocalAgent.MTP.${mtp_num}.Enable "${Enable}"
 	db_set Device.LocalAgent.MTP.${mtp_num}.Protocol "${Protocol}"
 	if [ "${Protocol}" = "MQTT" ]; then
@@ -508,7 +469,7 @@ configure_stomp_connection() {
 
 	validate_stomp_connection_section "${1}" || {
 		log "Validation of stomp section failed"
-		return 1;
+		exit 1;
 	}
 
 	stomp_num=$(( stomp_num + 1 ))
@@ -517,7 +478,6 @@ configure_stomp_connection() {
 	db_set Device.STOMP.Connection.${stomp_num}.Username "${Username}"
 	db_set Device.STOMP.Connection.${stomp_num}.Password "${Password}"
 
-	db_set Device.STOMP.Connection.${stomp_num}.Alias "cpe-${stomp_num}"
 	db_set Device.STOMP.Connection.${stomp_num}.Enable "${Enable}"
 	db_set Device.STOMP.Connection.${stomp_num}.Port "${Port}"
 	db_set Device.STOMP.Connection.${stomp_num}.EnableEncryption "${encryption}"
@@ -537,7 +497,7 @@ configure_mqtt_client(){
 
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
-		return 1;
+		exit 1;
 	}
 
 	if [ -z "${BrokerAddress}" ]; then
@@ -547,7 +507,6 @@ configure_mqtt_client(){
 
 	mqtt_num=$(( mqtt_num + 1 ))
 
-	db_set Device.MQTT.Client.${mqtt_num}.Alias "cpe-${mqtt_num}"
 	db_set Device.MQTT.Client.${mqtt_num}.Enable "${Enable}"
 	db_set Device.MQTT.Client.${mqtt_num}.BrokerAddress "${BrokerAddress}"
 	db_set Device.MQTT.Client.${mqtt_num}.BrokerPort "${BrokerPort}"
@@ -570,10 +529,11 @@ configure_obuspa() {
 
 	validate_obuspa_section "global" || {
 		log "Validation of global section failed"
-		return 1;
+		exit 1;
 	}
 
 	role_def_file="${role_file}"
+	[ ${enabled} -eq 0 ] && exit 0
 
 	if [ ${debug} -eq 1 ]; then
 		# Forward stdout of the command to logd
@@ -592,38 +552,28 @@ configure_obuspa() {
 	fi
 
 	if [ -n "${interface}" ]; then
-		network_get_physdev ifname ${interface}
+		network_get_device ifname ${interface}
 		log "ifname from ${interface} is ${ifname}"
 	fi
 
 	# Set this variable for root user and obuspa -c tool
-	if [ -f "${PROFILE}" ]; then
-		grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}
-		if [ "$?" -ne 0 ]; then
-			grep -q "export USP_BOARD_IFNAME" ${PROFILE}
-			if [ "$?" -eq 0 ]; then
-				sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
-			fi
-			echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
-		fi
-	else
-		echo "export USP_BOARD_IFNAME=${ifname}" > ${PROFILE}
-	fi
+	grep -q "export USP_BOARD_IFNAME=${ifname}" /root/.profile || \
+		echo "export USP_BOARD_IFNAME=${ifname}" >> /root/.profile
 
 	if [ -n "${db_file}" ]; then
-		update_keep "${db_file}"
+		echo "${db_file}" >>${KEEP_FILES}
 		procd_append_param command -f ${db_file}
 	fi
 
 	if [ -n "${trust_cert}" ]; then
-		update_keep "${trust_cert}"
+		echo "${trust_cert}" >>${KEEP_FILES}
 		if [ -f "${trust_cert}" ]; then
 			procd_append_param command -t ${trust_cert}
 		fi
 	fi
 
 	if [ -n "${client_cert}" ]; then
-		update_keep "${client_cert}"
+		echo "${client_cert}" >>${KEEP_FILES}
 		if [ -f "${client_cert}" ]; then
 			procd_append_param command -a ${client_cert}
 		fi
@@ -634,6 +584,10 @@ configure_obuspa() {
 
 # Create factory reset file
 db_init() {
+	[ -f ${PARAM_FILE} ] && rm -f ${PARAM_FILE}
+	[ -f /tmp/usp.db ] && rm -f /tmp/usp.db
+	[ -f ${KEEP_FILES} ] && rm -f ${KEEP_FILES}
+
 	# Load configuration
 	config_load $CONFIGURATION
 	config_foreach configure_obuspa obuspa
@@ -648,18 +602,58 @@ db_init() {
 	db_set Internal.Reboot.Cause "LocalFactoryReset"
 }
 
-start_service() {
-	local enabled
+# if uci changes for obuspa remove persistent db and then reload
+remove_db() {
+	local db_file
 
 	config_load obuspa
-	config_get enabled global enabled
+	config_get db_file global db_file
 
-	if [ "${enabled}" -eq 0 ]; then
-		log "OBUSPA not enabled"
-		return 0;
+	log "Removing db file (${db_file})"
+	[ -f ${db_file} ] && rm -f ${db_file}
+
+	sed -i "g/export USP_BOARD_IFNAME/d" /root/.profile
+
+	log "Restarting service"
+	stop
+	start
+}
+
+service_running() {
+	local AgentEndpointID serial oui user pass
+	local opt=""
+
+	ubus -t 10 wait_for usp.raw
+	config_load obuspa
+	config_get AgentEndpointID localagent EndpointID ""
+	if [ -z "${AgentEndpointID}" ]; then
+		serial=$(ubus -t 1 call usp.raw get '{"path":"Device.DeviceInfo.SerialNumber"}'|jsonfilter -e '@["parameters"][0].value')
+		oui=$(ubus -t 1 call usp.raw get '{"path":"Device.DeviceInfo.ManufacturerOUI"}'|jsonfilter -e '@["parameters"][0].value')
+		AgentEndpointID="os::${oui}-${serial}"
 	fi
 
+	config_get user localmqtt Username
+	if [ -n "${user}" ]; then
+		opt="-u ${user}"
+	fi
+	config_get pass localmqtt Password
+	if [ -n "${pass}" ]; then
+		opt="${opt} -P ${pass}"
+	fi
+	# publish Agent's EndpointID in mosquito broker for discovery
+	# This is a work around till obuspa does not support advertising
+	log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
+	mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" ${opt}
+
+	procd_running ${CONFIGURATION}
+}
+
+start_service() {
 	ubus wait_for usp.raw
+	if [ "$?" -ne 0 ]; then
+		log "OBUSPA failed to start usp.raw not available"
+		exit 0
+	fi
 
 	procd_open_instance ${CONFIGURATION}
 	procd_set_param command ${PROG}
@@ -674,19 +668,7 @@ start_service() {
 }
 
 stop_service() {
-	local db_file
-
-	config_load obuspa
-	config_get db_file global db_file
-
 	${PROG} -c stop 2>&1 >/dev/null
-
-	if [ -z "${db_file}" ]; then
-		db_file="/tmp/usp.db"
-	fi
-
-	[ -f ${db_file} ] && rm -f ${db_file}
-	[ -f ${PARAM_FILE} ] && rm -f ${PARAM_FILE}
 }
 
 reload_service() {
@@ -695,7 +677,8 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger "obuspa" "mosquitto"
+	procd_add_reload_trigger "uspd" "mosquitto"
+	procd_add_config_trigger "config.change" "${CONFIGURATION}" /etc/init.d/obuspa remove_db
 
 	# Create a reload trigger if schema update avaialble
 	procd_open_trigger
@@ -714,7 +697,13 @@ service_triggers() {
 					json_add_string "" "reload"
 				json_close_array
 			json_close_array
-			json_add_int "" "2000"
+			json_add_int "" "1000"
 		json_close_array
 	procd_close_trigger
+
+
+#	local interface
+#	config_load obuspa
+#	config_get interface global interface
+#	[ -n "$interface" ] && procd_add_interface_trigger "interface.*" "$interface" /etc/init.d/obuspa reload
 }

obuspa/files/etc/obuspa/dmcaching_exclude.json

@@ -1,6 +0,0 @@
-{
-  "dmcaching_exclude": [
-    "Device.DeviceInfo.ProcessStatus.Process.",
-    "Device.Hosts.Host."
-  ]
-}

owsd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.3
+PKG_VERSION:=1.1.2
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f78f7198944758cd2140887ecd8970432f678fc1
+PKG_SOURCE_VERSION:=fd696e9d1be8278db3eb1d9be97e1a66afd6e1f6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

owsd/files/owsd.config

@@ -1,6 +1,5 @@
 config owsd 'global'
-	option enable '0'
-#	option sock '/var/run/ubus/ubus.sock'
+	option sock '/var/run/ubus.sock'
 	option www '/www'
 #	option redirect '/cgi-bin/luci:/cacheflush.html'
 #	option www_maxage '3600'

owsd/files/owsd.hotplug

@@ -2,6 +2,19 @@
 
 [ "$ACTION" = ifup ] || exit 0
 
+handle_interface() {
+	ifname=$(uci get network.$1.ifname)
+
+	case "$ifname" in
+		@*)
+			alias_interface="$1 $alias_interface"
+			;;
+	esac
+}
+
+config_load network
+config_foreach handle_interface "interface"
+
 compare_owsd_iface() {
 	local interface
 
@@ -11,6 +24,13 @@ compare_owsd_iface() {
 		/etc/init.d/owsd reload
 		exit
 	fi
+
+	for i in $alias_interface; do
+	if [ "$INTERFACE" == "$i" ]; then
+			/etc/init.d/owsd reload
+			exit
+		fi
+	done
 }
 
 config_load owsd

owsd/files/owsd.init

@@ -124,7 +124,6 @@ validate_owsd_ubusproxy() {
 
 validate_owsd_global() {
 	uci_validate_section "owsd" "owsd" "global" \
-		'enable:bool:1' \
 		'sock:string' \
 		'redirect:string' \
 		'www:string' \
@@ -321,10 +320,6 @@ start_service() {
 	load_dhcp_domains
 
 	config_load owsd # note: do not overload a config while parsing it
-
-	config_get_bool owsd_enable global enable 1
-	[ $owsd_enable -eq 1 ] || return 0
-
 	procd_open_instance
 	procd_set_param command $PROG
 

periodicstats/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=periodicstats
-PKG_VERSION:=1.0.4
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=17a22d2a74f0ab2af6cec17b9b51ad5aac6fdd48
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/periodicstats.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/periodicstats
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Periodic Statistics Daemon
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm +libbbf_api +uspd
-endef
-
-define Package/periodicstats/description
-	Manage periodic statistics
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./periodicstats/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/periodicstats/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/bbf_plugin/libperiodicstats.so $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/periodicstatsd $(1)/usr/sbin
-endef
-
-$(eval $(call BuildPackage,periodicstats))

periodicstats/files/etc/config/periodicstats

@@ -1,4 +0,0 @@
-config globals 'globals'
-	option enable '0'
-	option base_interval '5'
-

periodicstats/files/etc/init.d/periodicstats

@@ -1,37 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-NAME=periodicstatsd
-PROG=/usr/sbin/periodicstatsd
-
-. /lib/functions.sh
-
-start_service() {
-	ubus wait_for usp
-	if [ -f "/etc/config/periodicstats" ]; then
-		if [ "$(uci -q get periodicstats.globals.enable)" == "1" ]; then
-			procd_open_instance periodicstatsd
-			procd_set_param command ${PROG}
-			procd_set_param respawn
-			procd_close_instance
-		fi
-	fi
-}
-
-stop() {
-	#stop_service() is called after procd killed the service
-	echo ;
-}
-
-service_triggers() {
-	procd_add_reload_trigger periodicstats uspd
-}
-
-reload_service() {
-	stop
-	start
-}
-

prj-unish/Makefile

@@ -0,0 +1,71 @@
+#
+# Copyright (C) 2021 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=prj-unish
+PKG_VERSION:=0.7.0
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=595bd811428f4c1271cc8e2f61a9b6311f4672f0
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/prj-unish.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/prj-unish
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Project unish
+  DEPENDS:=+libwifi +libuci +libubox +ubus +libpthread +libnl-genl
+endef
+
+define Package/prj-unish/description
+ This package provides unish-paanch.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+MAKE_PATH:=src
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+  rsync -r --exclude=.* ~/git/prj-unish/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/InstallDev
+	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include
+	#$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(STAGING_DIR)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/lib*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/lib*.so* $(1)/usr/lib/
+endef
+
+
+define Package/prj-unish/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/src/lib*.so* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/i1905d $(1)/usr/sbin/
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,prj-unish))

prj-unish/files/etc/config/i1905

@@ -0,0 +1,23 @@
+
+config ieee1905 'ieee1905'
+        option enabled '1'
+        option extension 0
+	option macaddress 'aa:aa:aa:10:20:30'
+	option registrar '2 5'
+
+config ap
+	option band '2'
+	option ssid 'TestSSID.2'
+	option encryption 'psk2'
+	option key '5555500000'
+
+config ap
+	option band '5'
+	option ssid 'TestSSID.5'
+	option encryption 'psk2'
+	option key '2222200000'
+
+config al-iface
+        option enabled 1
+        option ifname 'br-lan'
+	option type 'bridge'

qosmngr/Makefile

@@ -6,14 +6,14 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=qosmngr
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=460327011d932580f55c7b70acb1e652dd3c95a3
+PKG_SOURCE_VERSION:=03df56c6eb7c6737ce95576e89c915df77396953
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/qosmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 

qosmngr/files/etc/init.d/qos

@@ -23,6 +23,11 @@ start_service() {
 	fi
 }
 
+stop() {
+	#stop_service() is called after procd killed the service
+	echo ;
+}
+
 boot() {
 	setup_qos
 	start
@@ -32,8 +37,12 @@ service_triggers() {
 	procd_add_reload_trigger qos
 }
 
+reload_service() {
+	# Call functions to configure QoS
+	start
+}
+
 restart() {
-	stop
 	setup_qos
 	start
 }

qosmngr/files/etc/uci-defaults/60-qos_queue_generate

@@ -3,7 +3,7 @@
 . /lib/functions.sh
 
 ethwan="$(db -q get hw.board.ethernetWanPort)"
-cpu_model="$(brcm_fw_tool -k info)"
+cpu_model="$(grep Hardware /proc/cpuinfo  | awk '{print$NF}')"
 
 generate_queue(){
 	section="$1"
@@ -19,7 +19,7 @@ generate_queue(){
 
         if [ $is_lan -eq 1 ]; then
 		case $cpu_model in
-			68*) no_of_q="0 1 2 3" ;;
+			BCM968*) no_of_q="0 1 2 3" ;;
 		esac
 	fi
 

qosmngr/files/lib/qos/broadcom.sh

@@ -1,6 +1,5 @@
 #!/bin/sh
 . /lib/functions.sh
-. /lib/network/port.sh
 
 IP_RULE=""
 BR_RULE=""
@@ -14,7 +13,6 @@ PREV_ORDER=""
 CURR_ORDER=""
 MAX_ORDER=""
 
-
 # Function to handle a queue order and
 # update total number of queues
 handle_q_order() {
@@ -54,7 +52,7 @@ configure_precedence_to_file() {
 	line="$2"
 	order_file="$3"
 
-	if [ $order == "$PREV_ORDER" ]; then
+	if [ $order == $PREV_ORDER ]; then
 		queue_id=${line#*_}
 		val=${CURR_ORDER}_${queue_id}
 		echo $val >> $order_file
@@ -124,7 +122,7 @@ handle_queue() {
 	fi
 
 	# This is to get the qid per interface.
-	if [ "$INTF_NAME" == $ifname ]; then
+	if [ $INTF_NAME == $ifname ]; then
 		Q_COUNT=$((Q_COUNT + 1))
 	else
 		Q_COUNT='0'
@@ -233,12 +231,6 @@ handle_shaper() {
 	fi
 
 	config_get rate "$sid" "rate"
-	# Convert the rate from bps to kbps.
-	if [ $rate -lt 1000 ];then
-		return
-	fi
-
-	rate=$(($rate / 1000))
 	config_get bs "$sid" "burst_size"
 	tmctl setportshaper --devtype 0 --if $ifname --shapingrate $rate --burstsize $bs
 }
@@ -253,17 +245,17 @@ setup_qos() {
 		ebtables -t broute -I BROUTING -j qos
 	fi
 
-	iptables -w -t mangle -N qos_forward
+	iptables -t mangle -N qos_forward
 	ret=$?
-	[ $ret -eq 0 ] && iptables -w -t mangle -I FORWARD -j qos_forward
+	[ $ret -eq 0 ] && iptables -t mangle -I FORWARD -j qos_forward
 
-	iptables -w -t mangle -N qos_prerouting
+	iptables -t mangle -N qos_prerouting
 	ret=$?
-	[ $ret -eq 0 ] && iptables -w -t mangle -I PREROUTING -j qos_prerouting
+	[ $ret -eq 0 ] && iptables -t mangle -I PREROUTING -j qos_prerouting
 
-	iptables -w -t mangle -N qos_output
+	iptables -t mangle -N qos_output
 	ret=$?
-	[ $ret -eq 0 ] && iptables -w -t mangle -I OUTPUT -j qos_output
+	[ $ret -eq 0 ] && iptables -t mangle -I OUTPUT -j qos_output
 
 	ip6tables -t mangle -N qos_forward
 	ret=$?
@@ -281,13 +273,13 @@ setup_qos() {
 flush_chains() {
 	echo "ebtables -t broute -F qos" > /tmp/qos/classify.ebtables
 
-	echo "iptables -w -t mangle -F qos_forward" > /tmp/qos/classify.iptables
-	echo "iptables -w -t mangle -F qos_prerouting" >> /tmp/qos/classify.iptables
-	echo "iptables -w -t mangle -F qos_output" >> /tmp/qos/classify.iptables
+	echo "iptables -t mangle -F qos_forward" > /tmp/qos/classify.iptables
+	echo "iptables -t mangle -F qos_prerouting" >> /tmp/qos/classify.iptables
+	echo "iptables -t mangle -F qos_output" >> /tmp/qos/classify.iptables
 
-	echo "ip6tables -w -t mangle -F qos_forward" > /tmp/qos/classify.ip6tables
-	echo "ip6tables -w -t mangle -F qos_prerouting" >> /tmp/qos/classify.ip6tables
-	echo "ip6tables -w -t mangle -F qos_output" >> /tmp/qos/classify.ip6tables
+	echo "ip6tables -t mangle -F qos_forward" > /tmp/qos/classify.ip6tables
+	echo "ip6tables -t mangle -F qos_prerouting" >> /tmp/qos/classify.ip6tables
+	echo "ip6tables -t mangle -F qos_output" >> /tmp/qos/classify.ip6tables
 }
 
 init_broute_rule() {
@@ -307,20 +299,7 @@ broute_filter_on_dst_mac() {
 }
 
 broute_filter_on_pcp() {
-	# 5.04 onwards the vlan extension in ebtables is used for classification
-	# on the basis of vlan params which needs proto to be defined as 802_1Q in
-	# order to add a rule, now, proto can also be defined by specifying proto uci
-	# option as well as the rule may have a vlan id as well in which case the
-	# proto will already be present, hence, this check to not add --proto more
-	# than once
-	case "$BR_RULE" in
-	*proto*)
-		BR_RULE="$BR_RULE --vlan-prio $1"
-		;;
-	*)
-		BR_RULE="$BR_RULE --proto 802_1Q --vlan-prio $1"
-		;;
-	esac
+	BR_RULE="$BR_RULE --skbvlan-prio $1"
 }
 
 broute_filter_on_ether_type() {
@@ -328,14 +307,7 @@ broute_filter_on_ether_type() {
 }
 
 broute_filter_on_vid() {
-	case "$BR_RULE" in
-	*proto*)
-		BR_RULE="$BR_RULE --vlan-id $1"
-		;;
-	*)
-		BR_RULE="$BR_RULE --proto 802_1Q --vlan-id $1"
-		;;
-	esac
+	BR_RULE="$BR_RULE --skbvlan-id $1"
 }
 
 broute_rule_set_traffic_class() {
@@ -536,12 +508,12 @@ iptables_set_traffic_class() {
 
 append_rule_to_mangle_table() {
 	if [ $2 == 4 ]; then
-		echo "iptables -w -t mangle -A $1 $IP_RULE"  >> /tmp/qos/classify.iptables
+		echo "iptables -t mangle -A $1 $IP_RULE"  >> /tmp/qos/classify.iptables
 	elif [ $2 == 6 ]; then
-		echo "ip6tables -w -t mangle -A $1 $IP_RULE" >> /tmp/qos/classify.ip6tables
+		echo "ip6tables -t mangle -A $1 $IP_RULE" >> /tmp/qos/classify.ip6tables
 	elif [ $2 == 1 ]; then
-		echo "iptables -w -t mangle -A $1 $IP_RULE"  >> /tmp/qos/classify.iptables
-		echo "ip6tables -w -t mangle -A $1 $IP_RULE" >> /tmp/qos/classify.ip6tables
+		echo "iptables -t mangle -A $1 $IP_RULE"  >> /tmp/qos/classify.iptables
+		echo "ip6tables -t mangle -A $1 $IP_RULE" >> /tmp/qos/classify.ip6tables
 	fi
 }
 
@@ -673,20 +645,17 @@ assign_policer_to_port() {
 	local pindex="$2"
 	local portorder="$(db -q get hw.board.ethernetPortOrder)"
 	local wanport="$(db -q get hw.board.ethernetWanPort)"
-	local runner_lan_ports="$(bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/examine port | grep ': port/index=lan' | sed -e 's#\.##g' | cut -f2 -d' ' | sort -u | xargs)"
-	local i=1
 
 	for port in $portorder; do
 		if [ "$ifname" == "$port" ]; then
 			if [ "$wanport" == "$port" ]; then
 				bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure port/index=wan0 ingress_rate_limit={traffic_types=8,policer={policer/dir=us,index=$pindex}}
 			else
-				local lanport="$(echo -n "$runner_lan_ports" | cut -f${i} -d' ')"
-				bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure $lanport ingress_rate_limit={traffic_types=8,policer={policer/dir=us,index=$pindex}}
+				local i="${port: -1}"
+				bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure port/index=lan$i ingress_rate_limit={traffic_types=8,policer={policer/dir=us,index=$pindex}}
 			fi
 			break
 		fi
-		i=$((i+1))
 	done
 }
 
@@ -750,6 +719,11 @@ config_ingress_rate_limit() {
 	local in_burst_size=$3
 	local wanport="$(db -q get hw.board.ethernetWanPort)"
 
+	if [ "$ifname" == "$wanport" ]; then
+		logger -t qosmngr "policing is not support on port $ifname"
+		return
+	fi
+
 	# Unit in uci file is in bps while that accepted by ethswctl is kbits
 	if [ $ingress_rate -lt 1000 ]; then
 		return
@@ -763,10 +737,7 @@ config_ingress_rate_limit() {
 		in_burst_size=$((in_burst_size / 1000))
 	fi
 
-	local unitport="$(get_port_number $ifname)"
-	local unit=$(echo $unitport | cut -d ' ' -f 1)
-	local port=$(echo $unitport | cut -d ' ' -f 2)
-	ethswctl -c rxratectrl -n $unit -p $port -x $ingress_rate -y $in_burst_size
+	ethswctl -c rxratectrl -n 1 -p $ifname -x $ingress_rate -y $in_burst_size
 }
 
 #function to handle a classify section
@@ -839,7 +810,6 @@ configure_queue() {
 		for i in 0 1 2 3 4 5 6 7; do
 			tmctl delqcfg --devtype 0 --if $intf --qid $i &>/dev/null
 		done
-		tmctl porttminit --devtype 0 --if $intf --flag 0 --numqueues 8
 
 		mkdir -p /tmp/qos/$intf
 		touch /tmp/qos/$intf/q_order
@@ -858,14 +828,10 @@ configure_policer() {
 	# the old config if any and return
 	if [ $POLICER_SKIP -eq 0 ]; then
 		for intf in $(db get hw.board.ethernetPortOrder); do
-			local unitport="$(get_port_number $intf)"
-			local unit=$(echo $unitport | cut -d ' ' -f 1)
-			local port=$(echo $unitport | cut -d ' ' -f 2)
 			# setting rate and burst size to 0 disables rate limiting
-			if [ $port != "" -a $unit != "" ]; then
-				ethswctl -c rxratectrl -n $unit -p $port -x 0 -y 0
-			fi
+			ethswctl -c rxratectrl -n 1 -p $intf -x 0 -y 0
 		done
+		return
 	fi
 
 	# Delete policer
@@ -893,11 +859,8 @@ configure_policer() {
 }
 
 configure_qos() {
-	#queue configuration is being done after shaper configuration,
-	#If port shapingrate configuration on DISC device is called after queue configuration then
-	#driver overwrites the queue shaping rate with default value of port shaping rate.
-	configure_shaper
 	configure_queue
+	configure_shaper
 	configure_policer
 	configure_classify
 }

questd/files/etc/init.d/quest

@@ -12,3 +12,12 @@ start_service() {
 	procd_set_param respawn
 	procd_close_instance
 }
+
+service_triggers()
+{
+	procd_add_reload_trigger network wireless
+}
+
+reload_service() {
+	ubus -t 5 call router.network reload
+}

questd/files/usr/libexec/rpcd/router.network

@@ -0,0 +1,54 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions/network.sh
+. /lib/functions.sh
+
+case "$1" in
+	list)
+		echo '{ "dump" : {}, "hosts" : {} }'
+	;;
+	call)
+		case "$2" in
+			dump)
+				dump_network() {
+					local cfg="$1"
+					local is_lan type bool proto ipaddr netmask ifname
+
+					[ "$cfg" == "loopback" ] && return
+
+					config_get_bool is_lan $cfg is_lan 0
+					config_get type $cfg type
+					config_get_bool defaultroute $cfg defaultroute 1
+					config_get proto $cfg proto none
+					config_get ipaddr $cfg ipaddr
+					[ -z "$ipaddr" ] && network_get_ipaddr ipaddr $cfg
+					config_get netmask $cfg netmask "255.255.255.255"
+					config_get ifname $cfg ifname
+					
+					json_add_object "$cfg"
+				        json_add_boolean is_lan $is_lan
+				        json_add_string type "$type"
+				        json_add_boolean defaultroute $defaultroute
+				        json_add_string proto "$proto"
+				        json_add_string ipaddr "$ipaddr"
+				        json_add_string netmask "$netmask"
+				        json_add_string ifname "$ifname"
+					json_select ..			
+				}
+
+				config_load network
+				json_init
+				config_foreach dump_network interface
+				json_dump
+			;;		
+			hosts)
+				ubus call topology hosts | \
+					sed 's/interface_type/type/g' | \
+					sed 's/Ethernet/ethernet/g' | \
+					sed 's/Wi-Fi/wifi/g'
+			;;
+		esac
+	;;
+esac
+

rulengd/Makefile

@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.2.2
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=f5ded45562189a05f3912182d708bcb1427912f8
+PKG_SOURCE_VERSION:=e5afe7734674d416138a54526cc589c57ba28279
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

stunc/Makefile

@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=stunc
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.1
 
-PKG_SOURCE_VERSION:=d578df0c8e4e7d1b642a5cf037ce468379270534
+PKG_SOURCE_VERSION:=cd7c5d70bc97a2f1a26d5587ccf6f4c1e9ca82c8
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/stunc.git
 
@@ -29,7 +29,7 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF STUN Client
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json +libbbf_api
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
 endef
 
 define Package/$(PKG_NAME)/description
@@ -43,11 +43,9 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libstunc.so $(1)/usr/lib/bbfdm/libstunc.so
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/stunc $(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/etc/init.d/stunc $(1)/etc/init.d/stunc
-	$(INSTALL_DATA) ./files/etc/config/stunc $(1)/etc/config/stunc
+	$(INSTALL_DATA) ./files/etc/config/stun $(1)/etc/config/stun
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

stunc/files/etc/config/stun

@@ -1,6 +1,6 @@
 
-config stunc 'stunc'
-	option enabled '0'
+config stun 'stun'
+	option enable '0'
 	option username 'stun'
 	option password 'stun'
 	option server_address 'stun.l.google.com'

stunc/files/etc/init.d/stunc

@@ -1,20 +1,23 @@
 #!/bin/sh /etc/rc.common
+# STUN client software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Omar Kallel <omar.kallel@pivasoftware.com>
 
-START=99
-STOP=15
+START=90
 
 USE_PROCD=1
 PROG="/usr/sbin/stunc"
 
+
 log() {
 	#echo "${@}" >/dev/console
-	echo "${@}"|logger -t stunc -p info
+	echo "${@}"|logger -t stun -p info
 }
 
 validate_stun_section()
 {
-	uci_validate_section stunc stunc stunc \
-		'enabled:bool' \
+	uci_validate_section stun stun stun \
+		'enable:bool' \
 		'Username:string' \
 		'Password:string' \
 		'server_address:host' \
@@ -23,26 +26,31 @@ validate_stun_section()
 		'log_level:uinteger:0'
 }
 
-start_service() {
-	local enabled server_address
+service_running() {
+	ubus wait_for tr069
+	return $?;
+}
 
-	config_load stunc
+start_service() {
+	local enable server_address
+
+	config_load stun
 	validate_stun_section || {
-		log "Validation failed for stunc section";
-		return 1;
+		log "Validation failed for stun section";
+		exit 1;
 	}
 
-	if [ "$enabled" -eq 0 ]; then
-		return 0;
+	if [ "$enable" -eq 0 ]; then
+		exit 0;
 	fi
 
 	if [ -z "${server_address}" ]; then
 		log "Stun server address not defined or invalid"
-		return 0;
+		exit 0;
 	fi
 
-	procd_open_instance stunc
-	procd_set_param command ${PROG}
+	procd_open_instance stun
+	procd_set_param command "$PROG"
 	procd_set_param respawn "3" "7" "0"
 	procd_close_instance
 
@@ -55,5 +63,5 @@ reload_service() {
 
 service_triggers()
 {
-	procd_add_reload_trigger stunc
+	procd_add_reload_trigger stun
 }

sulu/Makefile

@@ -5,40 +5,40 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu
-PKG_VERSION:=0.2.20
+PKG_VERSION:=0.2.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/sulu.git
-PKG_SOURCE_VERSION:=1cb1723f36718997968e923732fd6327a354689a
+PKG_SOURCE_VERSION:=a41d8edde15be3f22e358fb31e0b4786047dab53
 
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_SOURCE_SUBDIR)
 
 PKG_RELEASE=$(PKG_VERSION)-$(PKG_SOURCE_VERSION)
 
-PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/sulu
-	SECTION:=sulu
-	CATEGORY:=Utilities
-	MENU=1
-	TITLE:=SULU-CE ReactJS based Web UI Package
-	DEPENDS:=+nginx
+#  $(Package/sulu/default)
+  SECTION:=sulu
+  CATEGORY:=Utilities
+  MENU=1
+  TITLE:=SULU-CE ReactJS based Web UI Package
 endef
 
 define Package/sulu/description
-	SULU-CE ReactJS based Web UI.
+ SULU-CE ReactJS based Web UI.
 endef
 
 define Package/sulu/install
-	$(INSTALL_DIR) $(1)/sulu
-	$(CP) $(PKG_BUILD_DIR)/dist/* $(1)/sulu
-	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/www
+	$(CP) $(PKG_BUILD_DIR)/out/* $(1)/www
+#	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,sulu))

sulu/files/etc/init.d/sulu

@@ -1,63 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t sulu.init -p debug
-}
-
-publish_endpoint() {
-	local AgentEndpointID serial oui user pass
-	local opt=""
-
-	# return if mosquitto_pub is not present
-	if ! which mosquitto_pub; then
-		log "mosquitto_pub not present can't publish endpointid"
-		return 0;
-	fi
-
-	ubus -t 10 wait_for usp.raw
-
-	# Get endpoint id from obuspa config first
-	config_load obuspa
-	config_get AgentEndpointID localagent EndpointID ""
-	if [ -z "${AgentEndpointID}" ]; then
-		serial=$(ubus -t 1 call usp.raw get '{"path":"Device.DeviceInfo.SerialNumber"}'|jsonfilter -e '@["parameters"][0].value')
-		oui=$(ubus -t 1 call usp.raw get '{"path":"Device.DeviceInfo.ManufacturerOUI"}'|jsonfilter -e '@["parameters"][0].value')
-		AgentEndpointID="os::${oui}-${serial}"
-	fi
-
-	config_get user localmqtt Username
-	if [ -n "${user}" ]; then
-		opt="-u ${user}"
-	fi
-	config_get pass localmqtt Password
-	if [ -n "${pass}" ]; then
-		opt="${opt} -P ${pass}"
-	fi
-
-	# publish Agent's EndpointID in mosquito broker for discovery
-	# This is a work around till obuspa does not support advertising
-	log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
-	mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" ${opt}
-}
-
-start_service() {
-	procd_open_instance sulu
-	publish_endpoint
-	procd_close_instance
-
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_config_trigger "config.change" "obuspa" /etc/init.d/sulu reload
-}

sulu/files/etc/nginx/conf.d/sulu.locations

@@ -1,18 +0,0 @@
-# proxy required for nginx to save the file
-location /upload_proxy {
-    return 200 "File upload is successful \n";
-}
-
-location /upload {
-	limit_except POST { deny all; }
-	client_body_temp_path /tmp/sulu; # the directory to which uploads will be saved, make sure to create the directory you wish to use
-	client_body_in_file_only on;
-	client_body_buffer_size 128K;
-	client_max_body_size 50M;
-	proxy_pass_request_headers on;
-	proxy_set_header X-FILE $request_body_file;
-	proxy_set_body $request_body_file;
-	proxy_redirect off;
-	#proxy_pass is necessary. body is only stored when being passed to middleware, so we are providing a proxy that just returns 200.
-	proxy_pass http://127.0.0.1:8080/upload_proxy;
-}

sulu/files/etc/uci-defaults/90-sulu-set-nginx-conf

@@ -1,10 +0,0 @@
-mkdir -p /tmp/sulu
-
-uci -q get nginx._sulu && exit 0
-
-uci -q set nginx._sulu=server
-uci -q add_list nginx._sulu.listen='8080'
-uci -q add_list nginx._sulu.listen='[::]:8080'
-uci -q add_list nginx._sulu.include='conf.d/sulu.locations'
-uci -q set nginx._sulu.root='/sulu'
-uci -q set nginx._sulu.server_name='_sulu'

swmodd/Makefile

@@ -6,33 +6,27 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.0.9
+PKG_VERSION:=1.1.0
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2283abeca8f6beb58cbbbe5c4865ed329832f957
+PKG_SOURCE_VERSION:=c8cc4a3b332ea931dbf2fe7e6b94bebf5c4bcc33
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/swmodd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:= Software Modules Daemon
-  DEPENDS:=+libuci +libubox +ubus +libuuid +libbbf_api +opkg \
-	    +PACKAGE_liblxc:liblxc +PACKAGE_liblxc:cgroupfs-mount \
-	    +@BUSYBOX_CONFIG_BUSYBOX +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=SWMOD - software modules ubus backend
+	DEPENDS:=+libuci +libubox +ubus +libuuid +PACKAGE_liblxc:liblxc
 endef
 
 define Package/swmodd/description
-	Software module daemon to manage software/deployment units using TR181 datamodel.
+	Ubus based backend for software modules which can be used by other applications running on top of it.
 endef
 
 TARGET_CFLAGS += \
@@ -44,26 +38,13 @@ MAKE_FLAGS += \
 	SWMOD_LXC="yes"
 endif
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/swmodd/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Package/swmodd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/etc/swmod
-	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) ./files/swmodd.init $(1)/etc/init.d/swmodd
+	$(INSTALL_DIR) $(1)/etc/swmod
+	$(INSTALL_CONF) ./files/map_du $(1)/etc/swmod/map_du
+	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/swmodd $(1)/usr/sbin/swmodd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libswmodd.so $(1)/usr/lib/bbfdm/libswmodd.so
-ifeq ($(CONFIG_PACKAGE_liblxc),y)
-	$(INSTALL_DIR) $(1)/usr/share/lxc/templates/
-	$(INSTALL_DIR) $(1)/usr/share/swmodd/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/templates/lxc-iopsys $(1)/usr/share/lxc/templates/lxc-iopsys
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/opkg_offline.sh $(1)/usr/share/swmodd/opkg_offline
-endif
 endef
 
 $(eval $(call BuildPackage,swmodd))

swmodd/files/swmodd.init

@@ -7,7 +7,7 @@ USE_PROCD=1
 PROG=/usr/sbin/swmodd
 
 start_service() {
-	procd_open_instance swmodd
+	procd_open_instance
 	procd_set_param command ${PROG}
 	procd_set_param respawn
 	procd_close_instance

twamp/Makefile

@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=twamp
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 
-PKG_SOURCE_VERSION:=dbddaa0c4d826dfdf37bb92f98a2b2ad23035ca3
+PKG_SOURCE_VERSION:=f6e914508aa1f7458f87bd68026f56262595d9a5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/twamp.git
 

urlfilter/Makefile

@@ -6,15 +6,14 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=urlfilter
-PKG_VERSION:=1.1.1
+PKG_VERSION:=1.0.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a2fca29140673d058eb0bfb2b3b3c9e61d7f301f
+PKG_SOURCE_VERSION:=891e8d36446c0b1e7999c5798375985b1804fcf1
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/urlfilter.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -27,7 +26,7 @@ define Package/urlfilter
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=URL filter
-  DEPENDS:=+libuci +libnetfilter-queue +libnfnetlink +iptables-mod-nfqueue +libpthread +libubox +ubus +conntrack
+  DEPENDS:=+libuci +libnetfilter-queue +libnfnetlink +libpthread +libubox +ubus
 endef
 
 define Package/urlfilter/description

urlfilter/files/etc/config/urlfilter

@@ -1,2 +1,2 @@
 config globals globals
-	option enable 0
+	option enable 1