swmodd: Run lxc as du

Setting '/proc/sys/net/ipv4/igmp_max_memberships' is not enough.
We must pass the max_groups parameter to the mcproxy to prevent MFC
entries from being added to mr_table and packet forwarding for extra
groups.

We also need to increase max_groups, since mcproxy always subscribe
two service groups - ALL-ROUTERS (224.0.0.2) and
ALL-IGMPv3-MC-ROUTERS (224.0.0.22).

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -1,117 +0,0 @@
-{
-	"Device.UserInterface.": {
-		"type": "object",
-		"version": "2.0",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Device.UserInterface.RemoteAccess.": {
-			"type": "object",
-			"version": "2.0",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": false,
-			"array": false,
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "enable"
-							}
-						}
-					}
-				]
-			},
-			"Port": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"range": [
-					{
-						"max": 65535
-					}
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "port"
-							}
-						}
-					}
-				]
-			},
-			"SupportedProtocols": {
-				"type": "string",
-				"read": true,
-				"write": false,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"list": {
-					"datatype": "string",
-					"enumerations": [
-						"HTTP",
-						"HTTPS"
-					]
-				},
-				"default": "HTTP"
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "protocol"
-							}
-						}
-					}
-				]
-			}
-		}
-	}
-}

bbf/files/etc/config/userinterface

@@ -1,6 +0,0 @@
-config userinterface 'remote_access'
-	option enable '0'
-	option interface 'wan'
-	option port '80'
-	option protocol 'HTTP'
-

bbf/files/etc/firewall.userinterface

@@ -1,85 +0,0 @@
-#!/bin/sh
-
-
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-configure_firewall_rule() {
-	local enable port protocol gui_port
-	local zone interface
-
-	config_load userinterface
-	config_get_bool enable remote_access enable 1
-	config_get port remote_access port
-	config_get interface remote_access interface
-
-	if [ "${enable}" -eq "0" ] || [ -z "${port}" ] || [ -z "${interface}" ]; then
-		return 0;
-	fi
-
-	zone="zone_${interface}_input"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-
-	zone="zone_${interface}_output"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-}
-
-delete_firewall_rule() {
-	local zone interface
-	local CMD
-
-	config_load userinterface
-	config_get interface remote_access interface
-
-	# Clean remote interface rules
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	zone="zone_${interface}_input"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-
-	zone="zone_${interface}_output"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-}
-
-# Delete existing remote access rules
-delete_firewall_rule
-
-# Configure the User Interface rule
-configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	procd_open_instance usp
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	# Inject firewall rules
-	if [ "${enable}" -eq "1" ]; then
-		/etc/firewall.userinterface
-	fi
-
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface"
-}

bbf/files/etc/uci-defaults/01-mosquitto-config

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-config_mosquitto_owrt() {
-	sec=$(uci -q get mosquitto.owrt)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto owrt)
-		uci -q rename mosquitto."${sec}=owrt"
-	fi
-
-	uci -q set mosquitto.owrt.use_uci="1"
-	uci -q set mosquitto.owrt.write_pid="1"
-	uci -q commit mosquitto
-}
-
-config_mosquitto_general() {
-	sec=$(uci -q get mosquitto.mosquitto)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto mosquitto)
-		uci -q rename mosquitto."${sec}=mosquitto"
-	fi
-
-	uci -q set mosquitto.mosquitto.log_dest="syslog"
-	uci -q set mosquitto.mosquitto.log_facility="5"
-	uci -q set mosquitto.mosquitto.log_timestamp="1"
-	uci -q set mosquitto.mosquitto.log_types="error"
-	uci -q set mosquitto.mosquitto.per_listener_settings="1"
-	uci -q commit mosquitto
-}
-
-config_mosquitto_persistence() {
-	sec=$(uci -q get mosquitto.persistence)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto persistence)
-		uci -q rename mosquitto."${sec}=persistence"
-	fi
-
-	uci -q set mosquitto.persistence.persistence="0"
-	uci -q set mosquitto.persistence.location="/var/run"
-	uci -q commit mosquitto
-}
-
-if [ -f "/etc/config/mosquitto" ]; then 
-	config_mosquitto_owrt
-	config_mosquitto_general
-	config_mosquitto_persistence
-fi

bbfdm/Makefile

@@ -1,31 +1,30 @@
 #
-# Copyright (C) 2022 IOPSYS
+# Copyright (C) 2023 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.42
+PKG_NAME:=bbfdm
+PKG_VERSION:=1.0.20
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=976744360c6f2b676046aee5cb6f61326e876b13
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
+PKG_SOURCE_VERSION:=4a8d286201efdff814f106e92147c697c32a94a9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 
-define Package/libbbf_api
+define Package/libbbfdm-api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
   ABI_VERSION:=1.0
 endef
 
@@ -34,14 +33,16 @@ define Package/libbbfdm/default
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api \
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
 	    +BBF_TR471:obudpst
 endef
 
 define Package/libbbfdm
   $(Package/libbbfdm/default)
-  TITLE += (internal)
-  VARIANT:=internal
+  TITLE += (default)
+  VARIANT:=default
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  DEFAULT_VARIANT:=1
 endef
 
 define Package/libbbfdm-mbedtls
@@ -49,23 +50,33 @@ define Package/libbbfdm-mbedtls
   TITLE += (mbedtls)
   DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
   VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
+  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
 endef
 
 define Package/libbbfdm-openssl
   $(Package/libbbfdm/default)
   TITLE += (openssl)
   DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  CONFLICTS := libbbfdm-mbedtls
   VARIANT:=openssl
+  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
 endef
 
 define Package/libbbfdm-wolfssl
   $(Package/libbbfdm/default)
   TITLE += (wolfssl)
   DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
   VARIANT:=wolfssl
+  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
+endef
+
+define Package/bbfdmd
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Datamodel ubus backend
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
+		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
+		   +PACKAGE_libbbfdm:libbbfdm
 endef
 
 define Package/userinterface
@@ -76,14 +87,14 @@ define Package/userinterface
 endef
 
 define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
+  Package to add Device.UserInterface. datamodel support
 endef
 
 define Package/libbbfdm/config
 	source "$(SOURCE)/Config_bbfdm.in"
 endef
 
-define Package/libbbf_api/description
+define Package/libbbfdm-api/description
  Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
 endef
 
@@ -100,6 +111,7 @@ endif
 
 CMAKE_OPTIONS += \
 	-DBBF_TR181=ON
+	-DBBF_WIFI_DATAELEMENTS=ON
 
 ifeq ($(CONFIG_BBF_TR104),y)
 CMAKE_OPTIONS += \
@@ -137,6 +149,10 @@ CMAKE_OPTIONS += \
 	-DBBF_DOTSO_PLUGIN=ON
 endif
 
+ifeq ($(BUILD_VARIANT),default)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
 ifeq ($(BUILD_VARIANT),openssl)
 CMAKE_OPTIONS += -DWITH_OPENSSL=ON
 endif
@@ -149,24 +165,34 @@ ifeq ($(BUILD_VARIANT),mbedtls)
 CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
 endif
 
-define Package/libbbf_api/install
+ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
+CMAKE_OPTIONS += \
+	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
+endif
+
+define Package/libbbfdm-api/install
 	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
 endef
 
 define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/lib
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
+ifeq ($(CONFIG_BBF_TR143),y)
 	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
 	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-ifeq ($(CONFIG_PACKAGE_mosquitto-ssl),y)
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-mosquitto-config $(1)/etc/uci-defaults/
+endif
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+endif
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 endif
 endef
 
@@ -176,22 +202,38 @@ define Package/libbbfdm/default/prerm
 	exit 0
 endef
 
+define Package/bbfdmd/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
+	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
+	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/src/bbfdmd $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/json/input.json $(1)/etc/bbfdm/
+endef
+
 define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
 	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
 	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
+	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
 	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
 endef
 
+Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
 Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
 Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
 Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
 
+Package/libbbfdm/install = $(Package/libbbfdm/default/install)
 Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
 Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
 Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
@@ -200,16 +242,22 @@ define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
 	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
+	# Work around for backward compatibility
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
 endef
 
-$(eval $(call BuildPackage,userinterface))
-$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm-api))
 $(eval $(call BuildPackage,libbbfdm))
 $(eval $(call BuildPackage,libbbfdm-openssl))
 $(eval $(call BuildPackage,libbbfdm-wolfssl))
 $(eval $(call BuildPackage,libbbfdm-mbedtls))
+$(eval $(call BuildPackage,bbfdmd))
+
+$(eval $(call BuildPackage,userinterface))

bbfdm/files/etc/config/bbfdm

@@ -0,0 +1,7 @@
+
+config bbfdmd 'bbfdmd'
+	option enabled '1'
+	option loglevel '1'
+	option refresh_time '10'
+	option transaction_timeout '10'
+

bbfdm/files/etc/config/userinterface

@@ -0,0 +1,3 @@
+config userinterface 'global'
+	option enable '1'
+

bbfdm/files/etc/firewall.userinterface

@@ -0,0 +1,125 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+IDENTIFIER="UI-REMOTE-ACCESS-WAN"
+
+log() {
+	echo "${@}"|logger -t firewall.userinterface -p info
+}
+
+if [ ! -f "/etc/config/userinterface" ] || [ ! -f "/etc/config/nginx" ]; then
+	exit 0;
+fi
+
+exec_cmd() {
+	if ! "$@"; then
+		log "Failed to run [$*]"
+	fi
+}
+
+delete_ui_firewall_rules() {
+	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
+	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
+
+	for chain in ${input_chains}; do
+		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
+		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+			if [ -n "${rule_num}" ]; then
+				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
+			fi
+		done
+	done
+
+	for chain in ${output_chains}; do
+		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
+		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+			if [ -n "${rule_num}" ]; then
+				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
+			fi
+		done
+	done
+
+	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
+	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
+
+	for chain in ${input6_chains}; do
+		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
+		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+			if [ -n "${rule_num}" ]; then
+				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
+			fi
+		done
+	done
+
+	for chain in ${output6_chains}; do
+		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
+		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+			if [ -n "${rule_num}" ]; then
+				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
+			fi
+		done
+	done
+}
+
+configure_ui_firewall_rule() {
+	local sec="${1}"
+	local enabled access interface
+	local port=""
+
+	config_get_bool enabled "${sec}" uci_enable '1'
+	config_get access "${sec}" uci_access ""
+	config_get interface "${sec}" uci_interface ""
+
+	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
+		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
+		for item in ${port_list}; do
+			if [ -z "${item##[0-9]*}" ]; then
+				port="${item}"
+				break
+			fi
+		done
+
+		if [ -z "${port}" ]; then
+			return 0
+		fi
+
+		zone="zone_${interface}_input"
+		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+		if [ "$?" -eq 0 ]; then
+			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+		fi
+
+		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+		if [ "$?" -eq 0 ]; then
+			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+		fi
+
+		zone="zone_${interface}_output"
+		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
+		if [ "$?" -eq 0 ]; then
+			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+		fi
+
+		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
+		if [ "$?" -eq 0 ]; then
+			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+		fi
+	fi
+}
+
+# Delete existing remote access rules
+delete_ui_firewall_rules
+
+config_load userinterface
+config_get_bool serv_enable global enable 1
+
+if [ "${serv_enable}" -eq "1" ]; then
+	config_load nginx
+	# Configure the User Interface rule
+	config_foreach configure_ui_firewall_rule server
+fi

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+[ "$ACTION" = "ifup" ] || exit 0
+
+apply_sysctl_configuration() {
+        local sysctl_conf
+
+        sysctl_conf="/etc/bbfdm/sysctl.conf"
+
+        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
+
+        sysctl -e -p "${sysctl_conf}" >&-
+}
+
+
+ubus -t 10 wait_for network.device
+apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -0,0 +1,80 @@
+#!/bin/sh /etc/rc.common
+
+START=96
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/bbfdmd
+
+BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
+
+log() {
+	echo "${@}"|logger -t bbfdmd.init -p info
+}
+
+validate_bbfdm_bbfdmd_section()
+{
+	uci_validate_section bbfdm bbfdmd "bbfdmd" \
+		'enabled:bool:true' \
+		'debug:bool:false' \
+		'loglevel:uinteger' \
+		'sock:string' \
+		'refresh_time:uinteger' \
+		'transaction_timeout:uinteger' \
+		'subprocess_level:uinteger'
+}
+
+configure_bbfdmd()
+{
+	local enabled debug sock
+
+	config_load bbfdm
+
+	validate_bbfdm_bbfdmd_section || {
+		log "Validation of bbfdmd section failed"
+		return 1;
+	}
+
+	[ "${enabled}" -eq 0 ] && return 0
+
+	[ ! -f "${BBFDM_JSON_INPUT}" ] && return 0
+
+	if [ -n "${loglevel}" ]; then
+		echo "$(jq --arg res ${loglevel} '.daemon.config += {"loglevel": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${refresh_time}" ]; then
+		echo "$(jq --arg res ${refresh_time} '.daemon.config += {"refresh_time": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${transaction_timeout}" ]; then
+		echo "$(jq --arg res ${transaction_timeout} '.daemon.config += {"transaction_timeout": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	if [ -n "${subprocess_level}" ]; then
+		echo "$(jq --arg res ${subprocess_level} '.daemon.config += {"subprocess_level": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
+	fi
+
+	procd_set_param command ${PROG}
+	if [ "${debug}" -eq 1 ]; then
+		procd_set_param stdout 1
+		procd_set_param stderr 1
+	fi
+
+	if [ -f "${sock}" ]; then
+		procd_append_param command -s "${sock}"
+	fi
+}
+
+start_service()
+{
+	procd_open_instance "bbfdm"
+	configure_bbfdmd
+	procd_set_param respawn
+	procd_close_instance "bbfdm"
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "bbfdm"
+}

bbfdm/files/etc/init.d/userinterface

@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+
+USE_PROCD=1
+
+start_service() {
+	local enable
+
+	config_load userinterface
+	config_get_bool enable global enable 1
+
+	if [ ! -f "/etc/config/nginx" ]; then
+		return 0
+	fi
+
+	if [ "${enable}" -eq "1" ]; then
+		ubus call service state '{"name":"nginx", "spawn":true}'
+	else
+		ubus call service state '{"name":"nginx", "spawn":false}'
+	fi
+
+	# Inject firewall rules
+	procd_open_instance userinterface
+	/etc/firewall.userinterface
+	procd_close_instance
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "userinterface" "nginx"
+}

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# This deletes the userinterface json plugin if exists in case of upgrade
+if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
+	rm /etc/bbfdm/json/UserInterface.json
+fi
+
+exit 0
+

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -0,0 +1 @@
+/etc/bbfdm/sysctl.conf

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -0,0 +1 @@
+/etc/nginx/allow_host_*

bulkdata/Makefile

@@ -1,28 +1,24 @@
 #
 # Copyright (C) 2022 iopsys Software Solutions AB
 #
-# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.10
+PKG_VERSION:=2.1.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
+PKG_SOURCE_VERSION:=2dd55d9c9eb01ed1b11e16bad9e2c3e8badfffeb
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk

capiagent/Makefile

@@ -1,17 +1,17 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2021-2023 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=wfa-capi
-PKG_VERSION:=2.0.1
+PKG_NAME:=capiagent
+PKG_VERSION:=2.1.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=3e671db8f567b19c109fc13b25bc571c4c73a962
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfa-capi.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/capiagent.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -24,18 +24,18 @@ PKG_LICENSE_FILES:=LICENSE
 include $(INCLUDE_DIR)/package.mk
 
 
-#define Package/wfa-capi/config
+#define Package/capiagent/config
 #  source "$(SOURCE)/Config.in"
 #endef
 
-define Package/wfa-capi
-  TITLE+= wfa-capi (agent daemon for Wi-Fi Alliance's CAPI commands)
+define Package/capiagent
+  TITLE+= capiagent (daemon implementing Wi-Fi Alliance's CAPI commands)
   DEPENDS= +libubox +libuci +libubus +libnl-genl +libeasy +libwifi \
 	   +libjson-c +libblobmsg-json +ubus +libieee1905
 endef
 
-define Package/wfa-capi/description
- This package provides agent for WiFi Alliance's CAPI specification.
+define Package/capiagent/description
+ This package provides agent for the WiFi Alliance's CAPI specification.
 endef
 
 TARGET_CFLAGS += \
@@ -46,7 +46,7 @@ TARGET_CFLAGS += \
 MAKE_PATH:=src
 
 
-define Package/wfa-capi/install
+define Package/capiagent/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/lib/wifi/capi
@@ -54,4 +54,4 @@ define Package/wfa-capi/install
 	$(CP) $(PKG_BUILD_DIR)/src/scripts/* $(1)/lib/wifi/capi
 endef
 
-$(eval $(call BuildPackage,wfa-capi))
+$(eval $(call BuildPackage,capiagent))

decollector/Makefile

@@ -4,25 +4,27 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=wfadatad
-PKG_VERSION:=4.0.1.6
+PKG_NAME:=decollector
+PKG_VERSION:=4.0.2.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7f882307d34a09b1cf09ea3335c2fa71a59ce92f
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
+PKG_SOURCE_VERSION:=fa1b24690ca00a73401fec1386dbf98932545d05
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/wfadatad-collector
+define Package/decollector
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=WiFi DataElements Collector Proxy
@@ -30,12 +32,13 @@ define Package/wfadatad-collector
 	   +libeasy +libwifiutils +libieee1905 +map-plugin
 endef
 
-define Package/wfadatad-collector/description
- It implements the WiFi DataElements Collector Proxy component.
+define Package/decollector/description
+ It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
+ DataElements specification.
 endef
 
 
-define Package/wfadatad-collector/config
+define Package/decollector/config
 	source "$(SOURCE)/Config.in"
 endef
 
@@ -54,7 +57,7 @@ TARGET_CFLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-  rsync -r --exclude=.* ~/git/wfadatad/ $(PKG_BUILD_DIR)/
+  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -63,15 +66,15 @@ MAKE_PATH:=src
 TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
 
 EXECS := \
-	$(if $(CONFIG_PACKAGE_wfadatad-collector),decollector)
+	$(if $(CONFIG_PACKAGE_decollector),decollector)
 
 MAKE_FLAGS += EXECS="$(EXECS)"
 
-define Package/wfadatad-collector/install
+define Package/decollector/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
 endef
 
-$(eval $(call BuildPackage,wfadatad-collector))
+$(eval $(call BuildPackage,decollector))

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.6
+PKG_VERSION:=3.5.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=81450033d98fcdb68911e2148f48d190492090a6
+PKG_SOURCE_VERSION:=ae9e8f3406f1087464b994cdfbc64a4ce2f86ed4
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
 endef
 
 define Package/$(PKG_NAME)/description

dectmngr/files/etc/init.d/dectmngr

@@ -6,31 +6,63 @@ START=70
 STOP=12
 
 USE_PROCD=1
-NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
+DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
 
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
+DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
+	dect_pid=$(pidof $PROG)
+	[ -n "$dect_pid" ] && kill $dect_pid
 
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME 
+	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
+	while pidof $PROG > /dev/null 2>&1; do
+		dect_pid=$(pidof $PROG)
+		[ -n "$dect_pid" ] && kill -9 $dect_pid
 		sleep 1
 	done
 }
 
+has_dect() {
+	[ -f "$DCX81_UART_DT_ALIAS" ]
+}
+
+get_dcx81_device() {
+	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
+	[ -e "$dcx81_uart_dt_node" ] || return 1
+	for tty_dt_node in /sys/class/tty/*/device/of_node; do
+		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
+			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
+			local device_name_line
+			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
+			readonly device="/dev/${device_name_line##DEVNAME=}"
+			[ -c "$device" ] || return 1
+			printf "%s" "$device"
+			return 0
+		fi
+	done
+	return 1
+}
+
 start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
 	local rxtun=
 
-	test $(db get hw.board.hasDect) = "0" && return
+	if ! has_dect; then
+		logger -t "$PROG" "Not starting because no DECT hardware is available."
+		return 0
+	fi
+
+	local dcx81_uart_device
+	if ! dcx81_uart_device="$(get_dcx81_device)"; then
+		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
+		dcx81_uart_device=/dev/ttyH0
+	fi
 
 	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
 
@@ -51,18 +83,25 @@ start_service() {
 	config_get log_dect_cmbs global log_dect_cmbs syslog
 
 	procd_open_instance
-	if [ "$log_dect_cmbs" = "none" ]; then
+
+	# dectmngr takes expects device without /dev
+	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
+	case "$log_dect_cmbs" in
+	none)
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command $PROG -comname ttyH0 $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
 		rm -f $LOG_PATH/*
-	elif [ "$log_dect_cmbs" = "file" ]; then
+		;;
+	file)
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
-	else
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
+		;;
+	*)
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
 		rm -f $LOG_PATH/*
-	fi
+		;;
+	esac
 
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
@@ -71,7 +110,7 @@ start_service() {
 }
 
 stop_service() {
-	test $(db get hw.board.hasDect) = "0" && return
+	has_dect || return 0
 
 	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
 	stop_and_wait_dectmngr
@@ -81,8 +120,7 @@ reload_service() {
 	ubus call dect reload
 }
 
-service_triggers()
-{
+service_triggers() {
 	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
 	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
 }
@@ -97,4 +135,3 @@ boot() {
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
-

dslmngr/Makefile

@@ -13,7 +13,7 @@ PKG_VERSION:=1.2.0
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_VERSION:=43dec92b1c86be7859521da337e7bd1168848b26
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

dslmngr/files/common/etc/init.d/dsl

@@ -21,8 +21,6 @@ start_service() {
 }
 
 stop_service() {
-	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
-
 	xtm_remove_devices
 	xdsl_stop
 }
@@ -45,4 +43,3 @@ reload_service() {
 service_triggers() {
         procd_add_reload_trigger dsl
 }
-

easy-soc-libs/Makefile

@@ -1,163 +0,0 @@
-#
-# Copyright (C) 2020 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=7.2.16
-PKG_RELEASE:=1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ff2fca6e57f6da1384f6a5f7741d8d1b2aa114fb
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS Easy SoC libraries
-  SUBMENU:=IOPSYS Easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
-  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
-  TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
-  TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
-else ifeq ($(CONFIG_TARGET_ipq95xx),y)
-  TARGET_PLATFORM=IPQ95XX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-  TARGET_PLATFORM=LINUX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_LINUX
-else
-  $(info Unexpected CONFIG_TARGET, use default MAC80211)
-  TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
-endif
-
-export TARGET_PLATFORM
-export TARGET_WIFI_TYPE
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-ifneq ($(CONFIG_PACKAGE_libwifi),)
-TARGET_CFLAGS +=-DHAS_WIFI
-endif
-
-esl-pkgs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-esl-pkgs-all := \
-	libeasy \
-	libwifiutils \
-	libwifi \
-	libdsl \
-	libethernet \
-	libqos
-
-ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
-  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
-	subdirs="$(subdirs)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-include easy.mk
-include wifi.mk
-include dsl.mk
-include ethernet.mk
-include qos.mk
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
-	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
-define Build/Compile/rebuild
-	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
-	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
-		rm -f $(PKG_BUILD_DIR)/.config_*)
-endef
-endif
-
-STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
-
-define Build/Compile
-	$(Build/Compile/rebuild)
-	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
-	$(call Build/Compile/Default)
-	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/easy-soc-libs/install
-	:
-endef
-
-$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -1,44 +0,0 @@
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= xDSL library (libdsl)
-endef
-
-define Package/libdsl/config
-  if PACKAGE_libdsl
-	  config LIBDSL_DEBUG
-		depends on PACKAGE_libdsl
-		bool "Enable dsl debugging"
-		default n
-
-	  config LIBDSL_TEST
-		depends on PACKAGE_libdsl
-		bool "Enable dsl test program"
-		default n
-
-  endif
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include/xdsl
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-define Build/Compile/libdsl
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endef
-endif
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef

easy-soc-libs/easy.mk

@@ -1,25 +0,0 @@
-
-
-define Package/libeasy
-  $(call Package/easy-soc-libs)
-  TITLE:= Common helper functions library (libeasy)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Build/InstallDev/libeasy
-	$(INSTALL_DIR) $(1)/usr/include/easy
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-
-define Package/libeasy/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/ethernet.mk

@@ -1,27 +0,0 @@
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_airoha:ecnt_api
-endef
-
-define Package/libethernet/config
-  config LIBETHERNET_DEBUG
-	depends on PACKAGE_libethernet
-	bool "Enable ethernet debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/qos.mk

@@ -1,27 +0,0 @@
-
-define Package/libqos
-  $(call Package/easy-soc-libs)
-  TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Package/libqos/config
-  config LIBQOS_DEBUG
-	depends on PACKAGE_libqos
-	bool "Enable qos debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libqos
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
-endef
-
-define Package/libqos/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/wifi.mk

@@ -1,53 +0,0 @@
-
-define Package/libwifiutils
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi utility library (libwifiutils.so)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Build/InstallDev/libwifiutils
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifiutils/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
-endef
-
-define Package/libwifi/config
-  if PACKAGE_libwifi
-  	config LIBWIFI_DEBUG
-		depends on PACKAGE_libwifi
-		bool "Enable debugging in libwifi"
-		default n
-
-	config LIBWIFI_USE_CTRL_IFACE
-		bool "Create UNIX sockets to interface with hostapd/wpa_supplicant"
-		default n
-  endif
-endef
-
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef

endptmngr/Config.in

@@ -1,4 +0,0 @@
-
-config ENDPT_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

endptmngr/Makefile

@@ -1,68 +0,0 @@
-#
-# Copyright (C) 2018 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-export CONFIG_BCM_CHIP_ID
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Broadcom Voice Endpoint Manager
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
-
-define Package/endptmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=endptmngr
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-	procd_open_instance
-	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_set_param nice -12
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger asterisk 
-}

ethmngr/Makefile

@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_iopsys_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,7 +37,7 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
 define Build/Compile
 endef
 endif
@@ -46,12 +46,10 @@ define Package/ethmngr/install
 	$(CP) ./files/common/* $(1)/
 ifneq ($(CONFIG_TARGET_brcmbca),)
 	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
 else
 	$(CP) ./files/linux/* $(1)/
 endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
 endif

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -1,208 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset -f switchmgr
-# alias for switchmgr
-switchmgr() {
-	"/userfs/bin/switchmgr" "$@"
-}
-
-unset -f tc3162_get_lan_port
-# get lan port port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_lan_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-
-	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
-	case "${ifname}" in
-	eth0.*)
-		;;
-	*)
-		logger -t "port-management" \
-		"unsupported - ${ifname} is not tc3162 switch port"
-		return 255
-		;;
-	esac
-
-	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
-	[[ -z "${if_idx}" ]] && return 255
-	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
-		logger -t "port-management" \
-		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
-		return 255
-	}
-	let "if_idx=${if_idx}-1"
-	return ${if_idx}
-}
-
-
-unset -f tc3162_get_mapped_port
-# get mapped switch port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_mapped_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-	local prtmap_procfile="/proc/tc3162/eth_portmap"
-	local lan_prt=255
-	local port=255
-	local prtmap_out_line_num=4
-	local prtmap_out_line=""
-	
-	# check "lan port map" marker in portmap output string
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
-
-	tc3162_get_lan_port "${ifname}"
-	let "if_idx=$?"
-	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
-
-	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
-	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-
-	# get and check lan port index from lan portmapping string
-	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
-	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
-
-	# get and check mapped port from lan portmapping string
-	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
-	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
-
-	return ${port}
-}
-
-unset -f get_max_port_speed
-# arg1: port ifname, ex: eth0.1
-get_max_port_speed() {
-	[[ -z "$1" ]] && { echo 0; return; }
-
-	local ifname="$1"
-	local port=255
-	local speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	# tc3162 capability for all ports is 1Gbps
-	speed=1000
-
-	echo $speed
-}
-
-unset -f power_updown
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-power_updown() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local port=255
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	switchmgr phy admin "${port}" "${enabled}"
-}
-
-unset -f set_port_settings
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: 0/1/off/on/..
-# arg6: port eee, ex: 0/1/off/on/..
-# arg7: port pause, ex: 0/1/off/on/..
-set_port_settings() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-	[[ -z "$3" ]] && return
-	[[ -z "$4" ]] && return
-	[[ -z "$5" ]] && return
-	[[ -z "$6" ]] && return
-	[[ -z "$7" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local speed="$3"
-	local duplex="$4"
-	local autoneg=$5
-	local eee="$6"
-	local pause="$7"
-	local port=255
-	local speedmode=1
-	local last_speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-	
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	let "autoneg=$(get_bool "${autoneg}" "-1")"
-	[[ ${autoneg} -eq -1 ]] && return
-
-	let "eee=$(get_bool "${eee}" "-1")"
-	[[ ${eee} -eq -1 ]] && return
-	
-	let "pause=$(get_bool "${pause}" "-1")"
-	[[ ${pause} -eq -1 ]] && return
-	
-	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
-	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-	
-	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
-	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
-		&& last_speed=${speed}
-	
-	switchmgr phy pause "${port}" "${pause}"
-
-	# set speedmode: speed+duplex+autoneg
-# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
-	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
-		switchmgr phy speedmode ${port} "1"
-	else
-		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
-		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
-		switchmgr phy speedmode "${port}" "${speedmode}"
-	fi
-	
-# TODO: implement MAC control register manipulations (mapped ports used) for
-	# eee settings change
-	# separate (tx/rx) pause (flow control) settings change
-	# set speed to 1Gbps separately from autoneg mode
-	
-# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
-	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
-
-	power_updown "${ifname}" ${enabled}
-
-}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -40,6 +40,12 @@ get_port_number() {
 	done
 }
 
+# arg1: port ifname, ex: eth0
+reset_port() {
+        local ifname="$1"
+        ethctl $ifname phy-reset >/dev/null
+}
+
 # arg1: port ifname, ex: eth0
 # arg2: port enabled, ex: 1
 power_updown() {
@@ -86,6 +92,9 @@ set_port_settings() {
 	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
 	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
 
+        # Reset the port before setting new params
+        reset_port $ifname
+
 	if [ "$numofcaps" == "1" ]; then
 		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
 	else

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -6,7 +6,7 @@ get_max_port_speed() {
 	fi
 
 	local ifname="$1"
-	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
+	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 00 | tail -n 1 | awk '{print$NF}')"
 	local speed=1000
 
 	case "$phycap" in

evoice/Makefile

@@ -1,106 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,334 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,181 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,56 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

gryphon-led-module/Makefile

@@ -41,32 +41,8 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
+# support compilation against BCM SDK kernel
+include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
 
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 # This is free software, licensed under the BSD-3-Clause
 # See /LICENSE for more information.
@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.14
+PKG_VERSION:=9.3.5
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=d135d87f65e569b504464738e2b0c2041865a20a
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
+PKG_SOURCE_VERSION:=caa4ac86b91b698e73e09a3ba8b60add36ea4b62
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -29,33 +29,44 @@ define Package/icwmp/default
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbf_api
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbfdm-api
+endef
+
+define Package/icwmp
+  $(Package/icwmp/default)
+  VARIANT:=default
+  DEFAULT_VARIANT:=1
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
 endef
 
 define Package/icwmp-openssl
   $(Package/icwmp/default)
   TITLE += (openssl)
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
   VARIANT:=openssl
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  CONFLICTS := icwmp icwmp-mbedtls icwmp-wolfssl
 endef
 
 define Package/icwmp-wolfssl
   $(Package/icwmp/default)
   TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp-openssl
   VARIANT:=wolfssl
+  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
+  CONFLICTS := icwmp icwmp-mbedtls icwmp-openssl
 endef
 
 define Package/icwmp-mbedtls
   $(Package/icwmp/default)
   TITLE += (mbedtls)
   DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  CONFLICTS := icwmp-openssl icwmp-wolfssl
   VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
+  CONFLICTS := icwmp icwmp-wolfssl icwmp-openssl
 endef
 
+ifeq ($(BUILD_VARIANT),default)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
 ifeq ($(BUILD_VARIANT),openssl)
 CMAKE_OPTIONS += -DWITH_OPENSSL=ON
 endif
@@ -99,10 +110,12 @@ define Package/icwmp/default/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
+Package/icwmp/install = $(Package/icwmp/default/install)
 Package/icwmp-openssl/install = $(Package/icwmp/default/install)
 Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
 Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
+$(eval $(call BuildPackage,icwmp))
 $(eval $(call BuildPackage,icwmp-openssl))
 $(eval $(call BuildPackage,icwmp-wolfssl))
 $(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/config/cwmp

@@ -11,8 +11,6 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
-	option ipv6_enable '0'
-	option ip_version '4'
 
 config cpe 'cpe'
 	option enable '1'
@@ -38,6 +36,7 @@ config cpe 'cpe'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
+	option active_notif_throttle '0'
 	
 config lwn 'lwn'
 	option enable '1'

icwmp/files/etc/firewall.cwmp

@@ -5,14 +5,14 @@ log() {
 	echo "${@}"|logger -t firewall.cwmp -p info
 }
 
-if [ ! -f "/var/state/cwmp" ]; then
+if [ ! -f "/var/state/icwmp" ]; then
 	exit 0;
 fi
 
-zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
+zone_name=$(uci -c /var/state -q get icwmp.acs.zonename)
 port=$(uci -q get cwmp.cpe.port)
-ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+ipaddr=$(uci -c /var/state -q get icwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get icwmp.acs.ip6)
 incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
 
 if [ -z "${zone_name}" ]; then
@@ -76,5 +76,5 @@ if [ "$?" -eq 0 ]; then
 	${cmd6}
 fi
 
-uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit cwmp
+uci -c /var/state -q set icwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit icwmp

icwmp/files/etc/icwmpd/update.sh

@@ -17,8 +17,8 @@ handle_icwmp_update() {
 	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
 
 	if [ "$ret" = "true" ]; then
-		# read status from var/state/cwmp
-		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
+		# read status from var/state/icwmp
+		status=$(uci -q -c /var/state get icwmp.sess_status.current_status)
 		if [ "$status" != "running" ]; then
 			log "Trigger out of bound inform, since last inform status was failure"
 			ubus -t 10 call tr069 inform >/dev/null 2>&1

icwmp/files/etc/init.d/icwmpd

@@ -320,7 +320,6 @@ validate_acs_section()
 		'compression:or("GZIP","Deflate","Disabled")' \
 		'retry_min_wait_interval:range(1, 65535)' \
 		'retry_interval_multiplier:range(1000, 65535)' \
-		'ipv6_enable:bool' \
 		'ssl_capath:string'
 
 }
@@ -382,12 +381,15 @@ boot() {
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
+	local wan_interface=""
+	
+	config_get wan_interface cpe default_wan_interface "wan"
+	
 	if [ "$enable_cwmp" = "0" ]; then
 		return 0
 	fi
 
 	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get wan_interface cpe default_wan_interface "wan"
 
 	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
 		# Set dhcp option 43 if not already configured
@@ -411,7 +413,6 @@ boot() {
 
 	# Copy backup data so that if it restart latter on, it gets the info
 	copy_cwmp_etc_files_to_varstate
-	touch /etc/icwmpd/cwmp_notification
 	mkdir -p /var/run/icwmpd/
 	touch /var/run/icwmpd/cwmp
 

ieee1905/Makefile

@@ -1,17 +1,17 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.0.10
+PKG_VERSION:=8.1.11
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=69b1073cfe3dc936c9cbe3e8a71005e9fa9f57e0
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
+PKG_SOURCE_VERSION:=90b8f44ca78b4711d5c86234fb0fc621ebd97fd9
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

imonitor/files/etc/init.d/imonitor

@@ -18,12 +18,7 @@ start_service() {
 	procd_close_instance
 }
 
-stop() {
-	service_stop imonitor
-}
-
 reload_service() {
 	stop
 	start
 }
-

iop/config

@@ -65,11 +65,12 @@ CONFIG_PACKAGE_ieee1905=y
 CONFIG_PACKAGE_map-agent=m
 CONFIG_PACKAGE_map-controller=m
 CONFIG_PACKAGE_map-topology=y
-CONFIG_PACKAGE_wfadatad-collector=y
+CONFIG_PACKAGE_decollector=y
+
+CONFIG_IEEE1905_CMDU_SA_IS_ALMAC=y
 
 # Network #
 CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_owsd=m
 CONFIG_PACKAGE_urlfilter=y
 
 # System #
@@ -79,12 +80,13 @@ CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_usermngr=y
 
 # TR-x69 #
-CONFIG_PACKAGE_uspd-mbedtls=y
-CONFIG_PACKAGE_icwmp-mbedtls=y
+CONFIG_PACKAGE_libbbfdm=y
+CONFIG_PACKAGE_bbfdmd=y
+CONFIG_PACKAGE_icwmp=y
 CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_stunc-mbedtls=m
+CONFIG_PACKAGE_stunc=m
 CONFIG_PACKAGE_swmodd=m
 CONFIG_PACKAGE_twamp=m
 CONFIG_PACKAGE_udpecho-client=m
@@ -108,6 +110,8 @@ CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_ds-lite=y
+CONFIG_PACKAGE_firewall=y
+# CONFIG_PACKAGE_firewall4 is not set
 CONFIG_PACKAGE_gre=y
 CONFIG_PACKAGE_map=y
 CONFIG_PACKAGE_ntfs-3g=y
@@ -303,10 +307,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-
-# Use fw3 iptables-based instead of newer nftables-based fw4
-# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
-# Enabling luci-app-firewall enables fw4
-# CONFIG_PACKAGE_luci-app-firewall is not set
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set

iop/scripts/feeds_update.sh

@@ -1,15 +1,26 @@
-#! /bin/bash
+#!/bin/bash
 
 function feeds_update {
-
+	heads=1
 	developer=0
 	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
+	while getopts "inh" opt; do
 		case $opt in
+		i)
+			heads=0
+			;;
 		n)
 			override=0
 			;;
+		h|\?)
+			echo "Usage: ./iop feeds_update [-i] [-n] [-h]"
+			echo
+			echo "OPTIONS:"
+			echo "  -i - Only update index. Do not change HEAD in feeds."
+			echo "  -n - Do not replace core packages with iopsys versions."
+			echo "  -h - Display this help message and exit."
+			exit 1
+			;;
 		esac
 	done
 
@@ -17,47 +28,42 @@ function feeds_update {
 
 	cp .config .genconfig_config_bak
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
+	if [ $heads == 1 ]; then
+		if [ $developer == 1 ]; then
+			./scripts/feeds update -g
+		else
+			./scripts/feeds update
+		fi
 	fi
-	./scripts/feeds update -ai
+	./scripts/feeds update -ai || exit 1
 
 	# replace core packages with iopsys versions
 	if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
+		./scripts/feeds install -f -p openwrt_core -a || exit 1
 	fi
 
+	(
+		echo '# DO NOT EDIT. Autogenerated file by ./iop feeds_update'
+		echo 'FEED_DEVICES_DIRS:='
+		find feeds -type f -name .is-feed-devices-dir -printf 'FEED_DEVICES_DIRS+=$(TOPDIR)/%h'
+	) > target/linux/feed-devices/feed-devices-list.mk || exit 1
+
 	# targets need to be installed explicitly
 	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
-
-	# Workaround for bug in 22.03.0-rc4 where installed target path has been
-	# moved to target/linux/feeds but Config.in and Makefile from installed
-	# targets are not properly included from the new location.
-	# This hack is to be removed once the issues are fixed.
-	# Note that the above block of code might no longer necessary because
-	# targets no longer need to be installed explicitly.
-	echo "Working around installed-target-bug"
-	for f in target/linux/feeds/*; do
-		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
+		./scripts/feeds install -f -p targets $target || exit 1
 	done
 
 	# install all packages
-	./scripts/feeds install -a
+	./scripts/feeds install -a || exit 1
 
 	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+	find -L package/feeds -maxdepth 2 -type l -delete || exit 1
 
 	cp .genconfig_config_bak .config
-	make defconfig
+	make defconfig || exit 1
 
 	# record when we last run this script
-	touch tmp/.iop_bootstrap
+	touch tmp/.iop_bootstrap || exit 1
 
 	# always return true
 	exit 0

iop/scripts/genconfig.sh

@@ -14,12 +14,12 @@ function genconfig {
 	target="bogus"
 	target_config_path=""
 	brcmbca_feed="target/linux/feeds/brcmbca"
-	ramips_feed="target/linux/feeds/iopsys-ramips"
 	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
+	x86_feed="target/linux/feeds/x86"
+	armvirt_feed="target/linux/feeds/armvirt"
+	mediatek_feed="target/linux/feeds/mediatek"
 	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -42,19 +42,13 @@ function genconfig {
 	}
 
 	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
+	    while read -r line
 	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -75,8 +69,7 @@ function genconfig {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-		num=$((num+1))
-	    done
+	    done < .genconfig.config
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -111,45 +104,30 @@ function genconfig {
 
 		[ -e $brcmbca_feed/genconfig ] &&
 			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $ramips_feed/genconfig ] &&
-			iopsys_ramips=$(cd $ramips_feed; ./genconfig)
 		[ -e $airoha_feed/genconfig ] &&
 			airoha=$(cd $airoha_feed; ./genconfig)
 		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
+			x86=$(cd $x86_feed; ./genconfig)
 		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
+			armvirt=$(cd $armvirt_feed; ./genconfig)
 		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
+			mediatek=$(cd $mediatek_feed; ./genconfig)
 		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
 			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
+			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca iopsys_ramips airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in brcmbca airoha x86 armvirt mediatek ipq95xx ipq53xx; do
 				echo "$list based boards:"
-				for b in ${!list}; do
+				a=$(echo "${!list}" | sort)
+				for b in $a; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			target_config_path="$ramips_feed/config"
-		    return
-		fi
-	    done
-
 	    for p in $airoha; do
 		if [ $p == $profile ]; then
 		    target="airoha"
@@ -158,25 +136,25 @@ function genconfig {
 		fi
 	    done
 
-	    for p in $iopsys_x86; do
+	    for p in $x86; do
 		if [ $p == $profile ]; then
-		    target="iopsys_x86"
+		    target="x86"
 			target_config_path="$x86_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_armvirt; do
+	    for p in $armvirt; do
 		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
+		    target="armvirt"
 			target_config_path="$armvirt_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_mediatek; do
+	    for p in $mediatek; do
 		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
+		    target="mediatek"
 			target_config_path="$mediatek_feed/config"
 		    return
 		fi
@@ -189,6 +167,22 @@ function genconfig {
 		    return
 		fi
 	    done
+
+	    for p in $ipq53xx; do
+		if [ $p == $profile ]; then
+		    target="ipq53xx"
+			target_config_path="$qualcomm_ipq53xx_feed/config"
+		    return
+		fi
+	    done
+
+	    for p in $brcmbca; do
+		if [ $p == $profile ]; then
+		    target="brcmbca"
+			target_config_path="$brcmbca_feed/config"
+		    return
+		fi
+	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -309,6 +303,24 @@ function genconfig {
 		fi
 	}
 
+	get_subtarget_for_device() {
+		readonly target="$1"
+		readonly device="$2"
+		readonly targetinfo_file="tmp/info/.targetinfo-feeds_$target"
+		readonly target_profile_line="Target-Profile: DEVICE_$device"
+		# We want to know after which Target: $target/$subtarget line
+		# our $target_profile_line appears
+		# This is a crude way to "parse" the file using shell 🤯
+		# 1. grep for both lines with line number output
+		# 2. grep again to determine the device profile line that we looked for
+		#    but output one context line before as well to determine corresponding subtarget line
+		# 4. Use head and sed to extract the subtarget
+		grep "^Target: $target/\|^$target_profile_line" "$targetinfo_file" \
+			| grep -E -B1 "^$target_profile_line" \
+			| head -n1 \
+			| sed -E "s|^Target: $target/||"
+	}
+
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
@@ -350,18 +362,22 @@ function genconfig {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
-
+		# hack to support custom-devices until we have deprecated this genconfig-script...
+		if [ -f "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" ]; then
+			cat "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" >> .config
+			echo "" >> .config
+		fi
+		
 		# Special handling for targets which use TARGET_DEVICES
 		case "$target" in
-		iopsys_ramips | airoha | iopsys_mediatek | brcmbca | ipq95xx)
+		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
 			# This assumes the device name to be unique within one target,
 			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
+			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
+			if [ -z "$subtarget" ]; then
 				echo "Error determining subtarget for $target / ${BOARDTYPE}"
 				return 1
 			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
@@ -454,7 +470,7 @@ function genconfig {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 0
+		exit 1
 	fi
 
 	if [ $# -eq 0 ]; then
@@ -491,7 +507,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$@" || exit 1
 	fi
 }
 

iop/scripts/genconfig_min.sh

@@ -13,12 +13,12 @@ function genconfig_min {
 	target="bogus"
 	target_config_path=""
 	brcmbca_feed="target/linux/feeds/brcmbca"
-	ramips_feed="target/linux/feeds/iopsys-ramips"
 	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
+	x86_feed="target/linux/feeds/x86"
+	armvirt_feed="target/linux/feeds/armvirt"
+	mediatek_feed="target/linux/feeds/mediatek"
 	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -41,19 +41,13 @@ function genconfig_min {
 	}
 
 	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
+	    while read -r line
 	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -74,8 +68,7 @@ function genconfig_min {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-		num=$((num+1))
-	    done
+	    done < .genconfig.config
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -110,45 +103,30 @@ function genconfig_min {
 
 		[ -e $brcmbca_feed/genconfig ] &&
 			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $ramips_feed/genconfig ] &&
-			iopsys_ramips=$(cd $ramips_feed; ./genconfig)
 		[ -e $airoha_feed/genconfig ] &&
 			airoha=$(cd $airoha_feed; ./genconfig)
 		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
+			x86=$(cd $x86_feed; ./genconfig)
 		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
+			armvirt=$(cd $armvirt_feed; ./genconfig)
 		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
+			mediatek=$(cd $mediatek_feed; ./genconfig)
 		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
 			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
+			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca iopsys_ramips airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in brcmbca airoha x86 armvirt mediatek ipq95xx ipq53xx; do
 				echo "$list based boards:"
-				for b in ${!list}; do
+				a=$(echo "${!list}" | sort)
+				for b in $a; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			target_config_path="$ramips_feed/config"
-		    return
-		fi
-	    done
-
 	    for p in $airoha; do
 		if [ $p == $profile ]; then
 		    target="airoha"
@@ -157,25 +135,25 @@ function genconfig_min {
 		fi
 	    done
 
-	    for p in $iopsys_x86; do
+	    for p in $x86; do
 		if [ $p == $profile ]; then
-		    target="iopsys_x86"
+		    target="x86"
 			target_config_path="$x86_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_armvirt; do
+	    for p in $armvirt; do
 		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
+		    target="armvirt"
 			target_config_path="$armvirt_feed/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_mediatek; do
+	    for p in $mediatek; do
 		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
+		    target="mediatek"
 			target_config_path="$mediatek_feed/config"
 		    return
 		fi
@@ -188,6 +166,22 @@ function genconfig_min {
 		    return
 		fi
 	    done
+
+	    for p in $ipq53xx; do
+		if [ $p == $profile ]; then
+		    target="ipq53xx"
+			target_config_path="$qualcomm_ipq53xx_feed/config"
+		    return
+		fi
+	    done
+
+	    for p in $brcmbca; do
+		if [ $p == $profile ]; then
+		    target="brcmbca"
+			target_config_path="$brcmbca_feed/config"
+		    return
+		fi
+	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -283,6 +277,24 @@ function genconfig_min {
 		fi
 	}
 
+	get_subtarget_for_device() {
+		readonly target="$1"
+		readonly device="$2"
+		readonly targetinfo_file="tmp/info/.targetinfo-feeds_$target"
+		readonly target_profile_line="Target-Profile: DEVICE_$device"
+		# We want to know after which Target: $target/$subtarget line
+		# our $target_profile_line appears
+		# This is a crude way to "parse" the file using shell 🤯
+		# 1. grep for both lines with line number output
+		# 2. grep again to determine the device profile line that we looked for
+		#    but output one context line before as well to determine corresponding subtarget line
+		# 4. Use head and sed to extract the subtarget
+		grep "^Target: $target/\|^$target_profile_line" "$targetinfo_file" \
+			| grep -E -B1 "^$target_profile_line" \
+			| head -n1 \
+			| sed -E "s|^Target: $target/||"
+	}
+
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
@@ -324,18 +336,22 @@ function genconfig_min {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
+		# hack to support custom-devices until we have deprecated this genconfig-script...
+		if [ -f "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" ]; then
+			cat "feeds/custom_devices/devices/$target/config/$BOARDTYPE/config" >> .config
+			echo "" >> .config
+		fi
 
 		# Special handling for targets which use TARGET_DEVICES
 		case "$target" in
-		iopsys_ramips | airoha | iopsys_mediatek | brcmbca | ipq95xx)
+		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
 			# This assumes the device name to be unique within one target,
 			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
+			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
+			if [ -z "$subtarget" ]; then
 				echo "Error determining subtarget for $target / ${BOARDTYPE}"
 				return 1
 			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
@@ -422,7 +438,7 @@ function genconfig_min {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 0
+		exit 1
 	fi
 
 	if [ $# -eq 0 ]; then

iop/scripts/update_package.sh

@@ -449,7 +449,7 @@ insert_feed_hash_in_feeds_config()
     local feed=$1
     local TO=$(cd feeds/${feed}; git rev-parse HEAD)
 
-    sed -i feeds.conf -e "/ ${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    sed -i feeds.conf -e "/ ${feed} / s/\(.*\)[;^].*/\1^${TO}/"
     git add feeds.conf
 }
 

iwatchdog/files/etc/init.d/iwatchdog

@@ -32,8 +32,3 @@ start_service() {
     procd_set_param respawn
     procd_close_instance
 }
-
-#stop() {
-#	service_stop /sbin/iwatchdog
-#}
-

libdsl/Makefile

@@ -0,0 +1,94 @@
+#
+# Copyright (C) 2020-2023 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libdsl
+PKG_VERSION:=7.2.99
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=f9f3fcd0f4140540db5bd41059bcca7ded083024
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libdsl.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+endif
+
+define Package/libdsl
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=IOPSYS HAL libs
+  MENU:=1
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/description
+  Library provides xDSL/GFAST HAL APIs
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libdsl,$(1),$(2))
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/test/libdsl_test $(1)/usr/bin/
+endif
+endef
+
+$(eval $(call BuildPackage,libdsl))

libeasy/Makefile

@@ -0,0 +1,68 @@
+#
+# Copyright (C) 2020-2023 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libeasy
+PKG_VERSION:=7.2.100
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=32db1b79bd88eba85a3e7518dbbbd1e29f4b06d9
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libeasy.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall"
+
+define Package/libeasy
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=IOPSYS HAL libs
+  MENU:=1
+  TITLE:= Common helper library (libeasy)
+  DEPENDS+=+libnl +libnl-route +libopenssl
+endef
+
+define Package/libeasy/description
+  Library provides common utility functions
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libeasy,$(1),$(2))
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeasy))

libethernet/Makefile

@@ -0,0 +1,105 @@
+#
+# Copyright (C) 2020-2023 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libethernet
+PKG_VERSION:=7.2.104
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=d777636ca43302a95e571ab030ec44ef50905570
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libethernet.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_airoha),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_mediatek),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else
+  $(info Unexpected CONFIG_TARGET, use default LINUX)
+  TARGET_PLATFORM=LINUX
+  TARGET_CFLAGS +=-DIOPSYS_LINUX
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+define Package/libethernet
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=IOPSYS HAL libs
+  MENU:=1
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api +TARGET_brcmbca:bcmkernel
+endef
+
+define Package/libethernet/description
+  Library provides ethernet HAL APIs
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        $(CP) -rf ./libethernet/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet.so $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libethernet,$(1),$(2))
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libethernet))

libpicoevent-bcm/Makefile

@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.3
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libpicoevent.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=f446f186102539cceedaa15a95a33547ac3c1fd7
+PKG_NAME:=libpicoevent-bcm
+
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libpicoevent-bcm
+  CATEGORY:=Libraries
+  TITLE:=Libpicoevent-bcm
+  URL:=
+  DEPENDS:= +TARGET_brcmbca:bcmkernel
+  include $(TOPDIR)/feeds/broadcom/bcmkernel/bcm-toolchain.mk
+  TARGET_CFLAGS := -Os -pipe -mfpu=vfpv3-d16 -mfloat-abi=softfp -DCONFIG_TARGET_brcmbca -g3 -fno-caller-saves -fno-plt -Wno-error=unused-but-set-variable -Wno-error=unused-result \
+                   -mfloat-abi=soft -fmacro-prefix-map=$(BUILD_DIR)libpicoevent-bcm-0.3=libpicoevent-bcm-0.3 -Wformat -Werror=format-security -fstack-protector -D_FORTIFY_SOURCE=1 \
+                   -Wl,-z,now -Wl,-z,relro -Wl,--build-i
+endef
+
+define Package/libpicoevent-bcm/description
+	Minimal event library
+endef
+
+define Package/libpicoevent-bcm/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/lib
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/lib/broadcom
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include/bcm963xx
+	$(CP) $(PKG_BUILD_DIR)/libpicoevent.h $(STAGING_DIR)/usr/include/bcm963xx
+	mkdir -p $(1)/usr/lib/broadcom
+	$(CP) $(PKG_BUILD_DIR)/libpicoevent.so $(STAGING_DIR)/usr/lib/broadcom
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libpicoevent.so $(1)/usr/lib/broadcom
+endef
+
+$(eval $(call BuildPackage,libpicoevent-bcm))

libqos/Makefile

@@ -0,0 +1,103 @@
+#
+# Copyright (C) 2020-2023 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libqos
+PKG_VERSION:=7.2.101
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=93ca0a66d6f82bca208bbe52b75ed582b20aa094
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libqos.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_airoha),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_ipq95xx),y)
+  TARGET_PLATFORM=IPQ95XX
+  TARGET_CFLAGS +=-DIPQ95XX
+else ifeq ($(CONFIG_TARGET_mediatek),y)
+  TARGET_PLATFORM=LINUX
+  TARGET_CFLAGS +=-DIOPSYS_LINUX
+else
+  $(info Unexpected CONFIG_TARGET, use default LINUX)
+  TARGET_PLATFORM=LINUX
+  TARGET_CFLAGS +=-DIOPSYS_LINUX
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+define Package/libqos
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=IOPSYS HAL libs
+  MENU:=1
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_brcmbca:bcmkernel
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        $(CP) -rf ./libqos/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos.so $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libqos,$(1),$(2))
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libqos))

libvoice-airoha/Makefile

@@ -7,7 +7,8 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-airoha
-PKG_VERSION:=0.1
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.3
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -16,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=9133eacf5665dc01fa58d819bcc96f0a97ebd63c
+PKG_SOURCE_VERSION:=3043d53818166ce02644d53f99b5830d228f78dd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -49,9 +50,7 @@ endef
 endif
 
 define Package/$(PKG_NAME)/install
-	# Although there is nothing needs to be installed, but the install section must NOT be empty. Otherwise the package will be skipped as below.
-	# WARNING: skipping libvoice-airoha -- package has no install section
-	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

libvoice-airoha/files/lib/voice/codecs.json

@@ -0,0 +1,59 @@
+{
+	"ulaw": {
+		"name": "G.711MuLaw",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"alaw": {
+		"name": "G.711ALaw",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"g726": {
+		"name": "G.726",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 16
+	},
+	"g723": {
+		"name": "G.723.1",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 30,
+		"ptime_increment": 30,
+		"bitrate": 5.3
+	},
+	"g729": {
+		"name": "G.729",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 8
+	},
+	"ilbc": {
+		"name": "iLBC",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 30,
+		"bitrate": 15.2
+	},
+	"gsm": {
+		"name": "GSM-AMR",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 20,
+		"bitrate": 12.2
+	}
+}
+

libvoice-broadcom/Makefile

@@ -7,7 +7,8 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-broadcom
-PKG_VERSION:=0.1
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.0
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -16,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=415e36c4007040f723b164dee79a1719d9c77f0a
+PKG_SOURCE_VERSION:=dc227982c48ee6d722f3fe18dc9db71495ce9758
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -27,7 +28,6 @@ PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
 LIBVOICE_PKG_BUILD_DIR := $(PKG_BUILD_DIR)
 
-export BCM_VOICEMNGR_WORKAROUND=y
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
@@ -52,9 +52,7 @@ endef
 endif
 
 define Package/$(PKG_NAME)/install
-	# Although there is nothing needs to be installed, but the install section must NOT be empty. Otherwise the package will be skipped as below.
-	# WARNING: skipping libvoice-broadcom -- package has no install section
-	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

libvoice-broadcom/files/lib/voice/codecs.json

@@ -0,0 +1,59 @@
+{
+	"ulaw": {
+		"name": "G.711MuLaw",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"alaw": {
+		"name": "G.711ALaw",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"g726": {
+		"name": "G.726",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 16
+	},
+	"g723": {
+		"name": "G.723.1",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 30,
+		"ptime_increment": 30,
+		"bitrate": 5.3
+	},
+	"g729": {
+		"name": "G.729",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 8
+	},
+	"ilbc": {
+		"name": "iLBC",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 30,
+		"bitrate": 15.2
+	},
+	"gsm": {
+		"name": "GSM-AMR",
+		"ptime_min": 10,
+		"ptime_max": 30,
+		"ptime_default": 20,
+		"ptime_increment": 20,
+		"bitrate": 12.2
+	}
+}
+

libvoice-d2/Makefile

@@ -7,7 +7,8 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-d2
-PKG_VERSION:=0.1
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.4
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -16,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=abedc475cac1a21ad434dbf2131eb42aa495744d
+PKG_SOURCE_VERSION:=f2134d372b3f5e5810e18f34d64d5486d17fca64
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -25,17 +26,17 @@ endif
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-LIBVOICE_PKG_BUILD_DIR := $(PKG_BUILD_DIR)
-
 include $(INCLUDE_DIR)/package.mk
 
+export D2_VTSP_PLATFORM := $(shell echo $(CONFIG_D2_VTSP_PLATFORM))
+
 TARGET_CFLAGS += -Wall -Werror
 
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
 	TITLE:=IOPSYS libvoice for D2 which is software DSP
 	URL:=
-	DEPENDS:=
+	DEPENDS:=+d2-voice
 endef
 
 define Package/$(PKG_NAME)/description
@@ -49,9 +50,7 @@ endef
 endif
 
 define Package/$(PKG_NAME)/install
-	# Although there is nothing needs to be installed, but the install section must NOT be empty. Otherwise the package will be skipped as below.
-	# WARNING: skipping libvoice-d2 -- package has no install section
-	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

libvoice-d2/files/lib/voice/codecs.json

@@ -0,0 +1,42 @@
+{
+	"ulaw": {
+		"name": "G.711MuLaw",
+		"ptime_min": 10,
+		"ptime_max": 40,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"alaw": {
+		"name": "G.711ALaw",
+		"ptime_min": 10,
+		"ptime_max": 40,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"g729a": {
+		"name": "G.729a",
+		"ptime_min": 10,
+		"ptime_max": 40,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 64
+	},
+	"g729": {
+		"name": "G.729",
+		"ptime_min": 10,
+		"ptime_max": 40,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 8
+	},
+	"g722": {
+		"name": "G.722",
+		"ptime_min": 10,
+		"ptime_max": 40,
+		"ptime_default": 20,
+		"ptime_increment": 10,
+		"bitrate": 56
+	}
+}

libwifi/Makefile

@@ -0,0 +1,162 @@
+#
+# Copyright (C) 2020-2023 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libwifi
+PKG_VERSION:=7.2.104
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=a246bf9fd92a1a8c107ffff3eb3428a4174a67df
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libwifi.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=LGPL-2.1-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_WIFI_TYPE=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_airoha),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_WIFI_TYPE=MEDIATEK MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_ipq95xx),y)
+  TARGET_PLATFORM=IPQ95XX
+  TARGET_WIFI_TYPE=QUALCOMM MAC80211
+  TARGET_CFLAGS +=-DIPQ95XX
+else ifeq ($(CONFIG_TARGET_mediatek),y)
+  TARGET_PLATFORM=LINUX
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_LINUX
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+ifneq ($(CONFIG_PACKAGE_libwifi),)
+TARGET_CFLAGS +=-DHAS_WIFI
+endif
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/libwifi/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/libwifi-common
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=libwifi
+  SUBMENU:=IOPSYS HAL libs
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+define Package/libwifi/description
+  Library provides WiFi HAL APIs and WiFi common utility functions
+endef
+
+define Package/libwifiutils
+  $(call Package/libwifi-common)
+  TITLE:= WiFi utility library (libwifiutils.so)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Build/InstallDev/libwifiutils
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifiutils/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+
+define Package/libwifi
+  $(call Package/libwifi-common)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libwifi
+	config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable debugging in libwifi"
+		default n
+
+	config LIBWIFI_USE_CTRL_IFACE
+		bool "Create UNIX sockets to interface with hostapd/wpa_supplicant"
+		default n
+  endif
+endef
+
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/wifiops.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
+endef
+
+
+define Build/InstallDev
+	$(call Build/InstallDev/libwifiutils,$(1),$(2))
+ifneq ($(CONFIG_PACKAGE_libwifi),)
+	$(call Build/InstallDev/libwifi,$(1),$(2))
+endif
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libwifiutils))
+$(eval $(call BuildPackage,libwifi))

loop-detector/files/loop_detection.init

@@ -20,10 +20,6 @@ start_service() {
 	fi
 }
 
-stop() {
-	service_stop /sbin/loop-detector
-}
-
 service_triggers()
 {
 	procd_add_reload_trigger loop_detection
@@ -33,4 +29,3 @@ reload_service() {
 	stop
 	start
 }
-

map-agent/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=4.2.0.4
+PKG_VERSION:=4.3.3.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=57a01fc4c8846486960a53d4ca808617520a051c
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE_VERSION:=6b1347b33333f3ef9884de0745aa862a0a1dabc8
+PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
@@ -16,7 +16,7 @@ PKG_LICENSE_FILES:=LICENSE
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-agent
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-agent
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -28,7 +28,7 @@ define Package/map-agent
   CATEGORY:=Utilities
   TITLE:=WiFi multi-AP Agent (EasyMesh R2)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +map-plugin +ip-bridge
+	   +map-plugin +ip-bridge +@BUSYBOX_CONFIG_PATCH +@BUSYBOX_CONFIG_DIFF
 endef
 
 

map-agent/files/etc/init.d/mapagent

@@ -175,6 +175,7 @@ validate_agent_config() {
 
 create_dir() {
         mkdir -p /var/run/multiap
+        mkdir -p /etc/multiap
 }
 
 start_service() {

map-controller/Makefile

@@ -1,18 +1,19 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=4.2.0.2
+PKG_VERSION:=4.3.0.6
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=47e0c27b8a4f08e1dbebab98c3c3aa72dae22dd0
+PKG_SOURCE_VERSION:=cadbccc7654a40f16f96f2c48e584b998c03620e
+PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-controller
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-controller
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

map-controller/files/etc/init.d/mapcontroller

@@ -70,7 +70,6 @@ validate_ap_section() {
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes",
 				"none", "psk-mixed", "psk-mixed+aes",
-				"wpa", "wpa+aes", "wpa2", "wpa2+aes",
 				"psk", "psk+aes")' \
 			'key:string' \
 			'vid:range(1,65535):1' \

map-topology/Makefile

@@ -6,13 +6,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.17
+PKG_VERSION:=2.5.1.21
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=7683a1b6a08996f07de573c67a33ad143dffeaa8
+PKG_SOURCE_VERSION:=693b79873af0017bd53ec001af7f3997565420e8
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

mcastmngr/files/common/etc/hotplug.d/iface/mcast.hotplug

@@ -20,7 +20,12 @@ compare_mcast_proxy_upstream() {
 
 	for dev in $upstream; do
 		if [ "$l3device" == "$dev" ]; then
-			ubus call uci commit '{"config":"mcast"}'
+			running=$(ubus call service list '{"name": "mcast"}' | jsonfilter -e '@.mcast.instances')
+			if [ -z "${running}" ];then
+				/etc/init.d/mcast start
+			else
+				ubus call uci commit '{"config":"mcast"}'
+			fi
 			exit
 		fi
 	done

mcastmngr/files/common/etc/init.d/mcast

@@ -51,10 +51,6 @@ boot() {
 	start
 }
 
-stop_service() {
-	service_stop "${PROG_EXE}"
-}
-
 reload_service() {
 	stop
 	start

mcastmngr/files/common/etc/uci-defaults/61-mcast_config_generate

@@ -20,9 +20,31 @@ generate_igmp_global_params(){
 	uci commit mcast
 }
 
-generate_mcast_config(){
+generate_mld_proxy_config(){
+	local u_itf="$1"
 
-	up_itf="$(uci -q get network.wan.device)"
+	uci add mcast proxy
+	uci rename mcast.@proxy[-1]="mc_proxy_MLD"
+	uci set mcast.@proxy[-1].enable="1"
+	uci set mcast.@proxy[-1].proto="mld"
+	uci set mcast.@proxy[-1].version="2"
+	uci set mcast.@proxy[-1].robustness="2"
+	uci set mcast.@proxy[-1].query_interval="125"
+	uci set mcast.@proxy[-1].query_response_interval="100"
+	uci set mcast.@proxy[-1].last_member_query_interval="10"
+	uci set mcast.@proxy[-1].fast_leave="1"
+	uci set mcast.@proxy[-1].snooping_mode="2"
+	uci add_list mcast.@proxy[-1].downstream_interface="br-lan"
+
+	IFS=" "
+	for itf in $u_itf; do
+		uci add_list mcast.@proxy[-1].upstream_interface="$itf"
+	done
+
+}
+
+generate_igmp_proxy_config(){
+	local u_itf="$1"
 
 	uci add mcast proxy
 	uci rename mcast.@proxy[-1]="igmp_proxy_1"
@@ -38,46 +60,61 @@ generate_mcast_config(){
 	uci add_list mcast.@proxy[-1].downstream_interface="br-lan"
 
 	IFS=" "
-	for itf in $up_itf; do
+	for itf in $u_itf; do
 		uci add_list mcast.@proxy[-1].upstream_interface="$itf"
 	done
 
 	uci add_list mcast.@proxy[-1].filter="239.0.0.0/8"
+}
 
+generate_mcast_config(){
 
-	uci add mcast proxy
-	uci rename mcast.@proxy[-1]="mc_proxy_MLD"
-	uci set mcast.@proxy[-1].enable="1"
-	uci set mcast.@proxy[-1].proto="mld"
-	uci set mcast.@proxy[-1].version="1"
-	uci set mcast.@proxy[-1].robustness="2"
-	uci set mcast.@proxy[-1].query_interval="125"
-	uci set mcast.@proxy[-1].query_response_interval="100"
-	uci set mcast.@proxy[-1].last_member_query_interval="10"
-	uci set mcast.@proxy[-1].fast_leave="1"
-	uci set mcast.@proxy[-1].snooping_mode="2"
-	uci add_list mcast.@proxy[-1].downstream_interface="br-lan"
-
-	IFS=" "
-	for itf in $up_itf; do
-		uci add_list mcast.@proxy[-1].upstream_interface="$itf"
-	done
+	up_itf="$(uci -q get network.wan.device)"
 
+	generate_igmp_proxy_config "$up_itf"
+	generate_mld_proxy_config "$up_itf"
 
 	uci commit mcast
 }
 
+interfaces_ok(){
+	local section_name=$1
+
+	local up_interf=$(uci -q get ${section_name}.upstream_interface)
+	[ -z "$up_interf" ] && return 1
+
+	local down_interf=$(uci -q get ${section_name}.downstream_interface)
+	[ -z "$down_interf" ] && return 1
+
+	# check if upstream untagged
+	IFS=" "
+	for itf in $up_interf; do
+		# check if there exist a device section for this upstream interface, if yes the
+		# do nothing, if no then split the it at . and use the native interface as
+		# upstream interface
+		dev_section=$(ubus call uci get '{"config":"network", "type":"device", "match":{"name":"'"$itf"'"}}' | jsonfilter -e @.values | jq keys[])
+
+		# mcast config is outdated, simply generate as per new logic
+		if [ -z "$dev_section" ]; then
+		       # check if the itf is a native interface	&& return 1
+			native=$(ubus call uci get '{"config":"ports", "type":"ethport", "match":{"ifname":"'"$itf"'"}}' | jsonfilter -e @.values | jq keys[])
+			[ -z "native" ] && return 1
+		fi
+	done
+	return 0
+}
+
+
 if [ -s "/etc/config/mcast" ]; then
 	if uci -q get mcast.@proxy[0] >/dev/null; then
-		# return if there is any valid content
-		exit
+		interfaces_ok "mcast.@proxy[0]" && exit
 	elif uci -q get mcast.@snooping[0] >/dev/null; then
 		# return if there is any valid content
 		exit
-	else
-		rm -f /etc/config/mcast
 	fi
 fi
+
+rm -f /etc/config/mcast
 touch /etc/config/mcast
 
 generate_igmp_global_params

mcastmngr/files/linux/lib/mcast/linux.sh

@@ -1,6 +1,7 @@
 #!/bin/sh
 
 . /lib/mcast/common.sh
+. /lib/functions/network.sh
 
 include /lib/network
 
@@ -41,22 +42,45 @@ config_mcproxy_interfaces() {
 		return
 	fi
 
-	for upstream in $upstreams; do
+	for excp in $exceptions; do
 		local filter=""
-		for excp in $exceptions; do
-			case $excp in
-			*/*)
-				ip_start="$(ipcalc.sh $excp | grep IP | awk '{print substr($0,4)}')"
-				ip_end="$(ipcalc.sh $excp | grep BROADCAST | awk '{print substr($0,11)}')"
-				filter="$filter ($ip_start - $ip_end | *)"
-				;;
-			*)
-				filter="$filter ($excp | *)"
-				;;
-			esac
+
+		case $excp in
+		*/*)
+			ip_start="$(ipcalc.sh $excp | grep IP | awk '{print substr($0,4)}')"
+			ip_end="$(ipcalc.sh $excp | grep BROADCAST | awk '{print substr($0,11)}')"
+			filter="$filter ($ip_start - $ip_end | *)"
+			;;
+		*)
+			filter="$filter ($excp | *)"
+			;;
+		esac
+
+		for upstream in $upstreams; do
+			echo "pinstance main upstream \"$upstream\" in blacklist table{$filter };" >> $CONFFILE
+			echo "pinstance main upstream \"$upstream\" out blacklist table{$filter };" >> $CONFFILE
 		done
-		echo "pinstance main upstream \"$upstream\" in blacklist table{$filter };" >> $CONFFILE
-		echo "pinstance main upstream \"$upstream\" out blacklist table{$filter };" >> $CONFFILE
+
+		for downstream in $downstreams; do
+			echo "pinstance main downstream \"$downstream\" in blacklist table{$filter };" >> $CONFFILE
+			echo "pinstance main downstream \"$downstream\" out blacklist table{$filter };" >> $CONFFILE
+		done
+	done
+}
+
+config_sysfs_mcast_snooping() {
+	local devsec=
+	local sectype=
+	local devtype=
+	local ports=
+
+	for downstream in $downstreams; do
+		devsec="$(uci show network | grep name=.*$downstream | cut -d'.' -f2)"
+		sectype="$(uci -q get network.$devsec)"
+		devtype="$(uci -q get network.$devsec.type)"
+		if [ "$sectype" == "device" -a "$devtype" == "bridge" ]; then
+			echo 1 > /sys/class/net/$downstream/bridge/multicast_snooping
+		fi
 	done
 }
 
@@ -72,6 +96,7 @@ config_mcproxy_instance() {
 	local exceptions=
 	local upstreams=
 	local downstreams=
+	local intf_has_ip=
 
 	CONFFILE=/var/etc/mcproxy_"$protocol".conf
 	rm -f $CONFFILE
@@ -117,16 +142,57 @@ config_mcproxy_instance() {
 		downstreams=$mld_p_down_interfaces
 	fi
 
+	# for snooping to work we should enable it on the bridge, doing it from
+	# here instead of from inside network config
+	config_sysfs_mcast_snooping
+
+	[ -n "$max_groups" ] && echo -e "max_groups $max_groups;" >> $CONFFILE
 	[ -n "$robustness" ] && echo -e "rv $robustness;" >> $CONFFILE
 	[ -n "$query_interval" ] && echo -e "qi $query_interval;" >> $CONFFILE
 	[ -n "$q_resp_interval" ] && echo -e "qri $q_resp_interval;" >> $CONFFILE
 	[ -n "$last_mem_q_int" ] && echo -e "lmqi $last_mem_q_int;" >> $CONFFILE
-	[ -n "$fast_leave" ] && echo -e "fastleave $fast_leave;\n" >> $CONFFILE
+	if [[ -n $fast_leave ]]; then
+		echo -e "fastleave $fast_leave;\n" >> $CONFFILE
+		config_sysfs_mcast_fastleave $fast_leave
+	fi
 
 	[ -n "$upstreams" ] && [ -n "$downstreams" ] &&
 		config_mcproxy_interfaces "$upstreams" "$downstreams" "$exceptions"
 
-	PROG_PARAMS="${PROG_PARAMS} -f ${CONFFILE}${PROG_PARAMS_SEPARATOR}"
+	# In case on proxy, upstreams is a list. Iterating and running the mcproxy
+	# for each valid upstream interface
+	for upstream_device in $upstreams;
+	do
+		# Read the upstream interface for the upstream device
+		# upstream device can have multiple logical interfaces like wan and wan6
+		# but same l3 device
+		local upstream_ifaces=$(get_network_of $upstream_device)
+
+		for iface in $upstream_ifaces;
+		do
+			if [ "$protocol" == "igmp" ]; then
+				network_get_ipaddr upstream_ip $iface
+				if [ ! -z "${upstream_ip}" ]; then
+					intf_has_ip=1
+					break
+				fi
+			fi
+
+			if [ "$protocol" == "mld" ]; then
+				network_get_ipaddr6 upstream_ip $iface
+				if [ ! -z "${upstream_ip}" ]; then
+					intf_has_ip=1
+					break
+				fi
+			fi
+		done
+
+		if [ -z "${intf_has_ip}" ]; then
+			continue
+		fi
+
+		PROG_PARAMS="${PROG_PARAMS} -f ${CONFFILE}${PROG_PARAMS_SEPARATOR}"
+	done
 }
 
 config_mcproxy() {
@@ -139,11 +205,41 @@ config_mcproxy() {
 	fi
 }
 
+config_sysfs_mcast_fastleave() {
+	local devsec=
+	local sectype=
+	local devtype=
+	local ports=
+
+	for downstream in $downstreams; do
+		devsec="$(uci show network | grep name=.*$downstream | cut -d'.' -f2)"
+		sectype="$(uci -q get network.$devsec)"
+		devtype="$(uci -q get network.$devsec.type)"
+		if [ "$sectype" == "device" -a "$devtype" == "bridge" ]; then
+			ports="$(uci get network.$devsec.ports)"
+			for prt in $ports; do
+				echo $1 > /sys/class/net/$prt/brport/multicast_fast_leave
+			done
+		else
+			[[ -f  /sys/class/net/$downstream/brport/multicast_fast_leave ]] && echo $1 > /sys/class/net/$downstream/brport/multicast_fast_leave
+		fi
+	done
+
+}
+
 configure_mcast() {
 	config_global_params "set_max_groups_and_sources"
 
+	# mcproxy reserves two multicast subscriptions for igmp router service groups
+	local mg=$(cat /proc/sys/net/ipv4/igmp_max_memberships)
+	mg=$((mg+2))
+	echo $mg > /proc/sys/net/ipv4/igmp_max_memberships
+
 	read_mcast_snooping_params
 	read_mcast_proxy_params
-
 	config_mcproxy
+
+	if [ -z "${PROG_PARAMS}" ]; then
+		exit 0
+	fi
 }

mcastmngr/files/linux/usr/libexec/rpcd/mcast

@@ -0,0 +1,151 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+
+read_mcast_stats() {
+
+	temp_igmp_file='/tmp/igmp_stats_'$$
+	# Sending signal to mcproxy to dump multicast data in /tmp/igmp_snooping_stats
+	mcast_pids=$(pidof mcproxy)
+	for pid in $mcast_pids
+	do
+		$(kill -10 $pid)
+	done
+	cat /tmp/igmp_snooping_stats > temp_igmp_file
+
+	local mcast_addrs=""
+	local ifaces=""
+
+	while read line; do
+	# reading each line
+		case $line in
+		br-*)
+			found_iface=0
+			snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+			if [ -z "$ifaces" ]; then
+				ifaces="$snoop_iface"
+				continue
+			fi
+
+			IFS=" "
+			for ifx in $ifaces; do
+				if [ $ifx == $snoop_iface ]; then
+					found_iface=1
+					break
+				fi
+			done
+
+			if [ $found_iface -eq 0 ]; then
+				ifaces="$ifaces $snoop_iface"
+				continue
+			fi
+			;;
+		esac
+	done < temp_igmp_file
+
+	while read line; do
+	# reading each line
+		case $line in
+		br-*)
+			found_ip=0
+			grp_ip="$(echo $line | awk -F ' ' '{ print $2 }')"
+			if [ -z "$mcast_addrs" ]; then
+				mcast_addrs="$grp_ip"
+				continue
+			fi
+
+			IFS=" "
+			for ip_addr in $mcast_addrs; do
+				if [ $ip_addr == $grp_ip ]; then
+					found_ip=1
+					break
+				fi
+			done
+
+			if [ $found_ip -eq 0 ]; then
+				mcast_addrs="$mcast_addrs $grp_ip"
+				continue
+			fi
+			;;
+		esac
+	done < temp_igmp_file
+
+	json_init
+	json_add_array "snooping"
+	json_add_object ""
+	IFS=" "
+	for intf in $ifaces; do
+		while read line; do
+		# reading each line
+			case $line in
+			br-*)
+				snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+				if [ "$snoop_iface" != "$intf" ]; then
+					continue
+				fi
+				json_add_string "interface" "$intf"
+				json_add_array "groups"
+				break
+				;;
+			esac
+		done < temp_igmp_file
+		IFS=" "
+		for gip_addr in $mcast_addrs; do
+			grp_obj_added=0
+			while read line; do
+			# reading each line
+				case $line in
+				br-*)
+					snoop_iface="$(echo $line | awk -F ' ' '{ print $1 }')"
+					if [ "$snoop_iface" != "$intf" ]; then
+						continue
+					fi
+					grp_ip="$(echo $line | awk -F ' ' '{ print $2 }')"
+					if [ "$grp_ip" != "$gip_addr" ]; then
+						continue
+					fi
+					if [ $grp_obj_added -eq 0 ]; then
+						json_add_object ""
+						gip="$(ipcalc.sh $gip_addr | grep IP | awk '{print substr($0,4)}')"
+						json_add_string "groupaddr" "$gip"
+						json_add_array "clients"
+						grp_obj_added=1
+					fi
+
+					json_add_object ""
+					host_ip="$(echo $line | awk -F ' ' '{ print $3 }')"
+					h_ip="$(ipcalc.sh $host_ip | grep IP | awk '{print substr($0,4)}')"
+					json_add_string "ipaddr" "$h_ip"
+					src_port="$(echo $line | awk -F ' ' '{ print $4 }')"
+					json_add_string "device" "$src_port"
+					timeout="$(echo $line | awk -F ' ' '{ print $5 }')"
+					json_add_int "timeout" "$timeout"
+					json_close_object #close the associated device object
+					;;
+				esac
+			done < temp_igmp_file
+			json_close_array #close the associated devices array
+			json_close_object # close the groups object
+		done # close the loop for group addresses
+		json_close_array #close the groups array
+	done # close the loop for interfaces
+	json_close_object # close the snooping object
+	json_close_array # close the snooping array
+	json_dump
+
+	rm -f temp_igmp_file
+}
+
+case "$1" in
+	list)
+		echo '{ "stats":{} }'
+		;;
+	call)
+		case "$2" in
+			stats)
+				read_mcast_stats
+				;;
+		esac
+		;;
+esac

obuspa/Config.in

@@ -23,7 +23,7 @@ config OBUSPA_MTP_ENABLE_COAP
 	default y
 
 config OBUSPA_CONTROLLER_MTP_VERIFY
-	bool "Enable verification of MQTT response topic before processing the message"
+	bool "Enable verification of controller MTP before processing the message"
 	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=7.0.0.7
+PKG_VERSION:=7.0.2.16
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE_VERSION:=0a2a3481dddea672a2b12d1fcaa689d7fa761fe3
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/obuspa.git
+PKG_SOURCE_VERSION:=312a739dc9106e8ff490288ba22270f4ce7e1fed
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -110,7 +110,6 @@ define Package/obuspa/install
 	$(INSTALL_DATA) ./files/etc/bbfdm/json/USPAgent.json $(1)/etc/bbfdm/json/USPAgent.json
 	$(INSTALL_DATA) ./files/etc/bbfdm/json/TransferComplete.json $(1)/etc/bbfdm/json/TransferComplete.json
 	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/50-add-mqtt-usp-test $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -10,23 +10,3 @@ config obuspa 'global'
 	#option client_cert '/etc/obuspa/client.pem'
 	#option log_dest '/var/log/obuspa'
 
-# Adds Device.LocalAgent.MTP.
-config mtp 'test_mtp'
-	option Protocol 'MQTT'
-	option ResponseTopicConfigured '/usp/endpoint'
-	option mqtt 'testmqtt'
-
-# Adds Device.MQTT.Client.
-config mqtt 'testmqtt'
-	option BrokerAddress '127.0.0.1'
-	option BrokerPort '1883'
-	option TransportProtocol 'TCP/IP'
-
-# Adds Device.LocalAgent.Controller.
-config controller 'testcontroller'
-	option EndpointID 'proto::interop-usp-controller'
-	option Protocol 'MQTT'
-	option Topic '/usp/controller'
-	option mqtt 'testmqtt'
-	option assigned_role_name 'full_access'
-

obuspa/files/etc/init.d/obuspa

@@ -55,38 +55,28 @@ db_set_sql()
 	value="$*"
 
 	if [ -n "${param}" ] && [ -n "${value}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c dbset "${param}" "${value}" >/dev/null 2>&1
-	fi
-}
-
-db_del_sql()
-{
-	local param
-
-	param="${1}"
-
-	if [ -n "${param}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c dbdel "${param}" >/dev/null 2>&1
+		if grep -q "${param} " ${DB_DUMP}; then
+			value="${value//\//\\/}"
+			sed -i "s/${param} .*/${param} \"${value}\"/g" ${DB_DUMP}
+		else
+			echo "${param} \"${value}\"" >> ${DB_DUMP}
+		fi
 	fi
 }
 
 db_set()
 {
-	# if sql db present, update sql db
-	# else update reset file
-	if [ -f "${SQL_DB_FILE}" ]; then
+	# if sql db dump file present, update it
+	if [ -f "${DB_DUMP}" ]; then
 		db_set_sql "$@"
 	else
 		db_set_reset_file "$@"
 	fi
 }
 
-update_db_dump()
+dump_db()
 {
-	if [ -f "${DB_DUMP}" ]; then
-		rm ${DB_DUMP}
-		${PROG} -f ${SQL_DB_FILE} -c show database |sort > ${DB_DUMP}
-	fi
+	${PROG} -f ${SQL_DB_FILE} -c show database |awk 'NR>1 {print $1 " \"" $3 "\""}' | sort  > ${DB_DUMP}
 }
 
 # if db present then check if it matches with existing instances
@@ -102,7 +92,7 @@ get_base_path()
 	count=0
 
 	if [ -f "${DB_DUMP}" ]; then
-		path=$(grep "${refpath}\d.Alias => ${value}" ${DB_DUMP})
+		path=$(grep "${refpath}\d.Alias \"${value}\"" ${DB_DUMP})
 		path=${path%.*}
 		if [ -z "${path}" ]; then
 			path=$(grep -o "${refpath}\d" ${DB_DUMP} |sort -r|head -n 1)
@@ -234,7 +224,10 @@ validate_controller_section()
 		'Host:string' \
 		'Port:port' \
 		'Path:string' \
-		'EnableEncryption:bool'
+		'EnableEncryption:bool' \
+		'PeriodicNotifInterval:uinteger' \
+		'SessionMode:string:Allow'
+
 }
 
 validate_subscription_section()
@@ -259,6 +252,7 @@ validate_mtp_section()
 		'mqtt:string' \
 		'stomp:string' \
 		'Reference:string' \
+		'PublishQoS:uinteger' \
 		'EnableEncryption:bool'
 }
 
@@ -300,56 +294,6 @@ validate_challenge_section()
 		'LockoutPeriod:uinteger:0'
 }
 
-get_oui_from_db()
-{
-	db -q get device.deviceinfo.ManufacturerOUI
-}
-
-get_serial_from_db()
-{
-	db -q get device.deviceinfo.SerialNumber
-}
-
-publish_endpoint()
-{
-	local AgentEndpointID serial oui user pass
-
-	if ! uci -q get obuspa.testmqtt; then
-		return 0;
-	fi
-
-	# return if mosquitto_pub is not present
-	if [ ! "$(command -v mosquitto_pub)" ]; then
-		log "mosquitto_pub not present can't publish EndpointID"
-		return 0;
-	fi
-
-	# Get endpoint id from obuspa config first
-	config_load obuspa
-	config_get AgentEndpointID localagent EndpointID ""
-	if [ -z "${AgentEndpointID}" ]; then
-		serial=$(get_serial_from_db)
-		oui=$(get_oui_from_db)
-		AgentEndpointID="os::${oui}-${serial//+/%2B}"
-	fi
-
-	config_get user testmqtt Username
-	config_get pass testmqtt Password
-
-	# publish Agent's EndpointID in mosquito broker for discovery by usp-js
-	# This is a work around till obuspa adds supports for mDNS discovery
-	if [ -n "${user}" ] && [ -n "${pass}" ]; then
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username, password"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}" -P "${pass}"
-	elif [ -n "${user}" ]; then
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username only"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}"
-	else
-		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
-		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}"
-	fi
-}
-
 configure_localagent()
 {
 	local EndpointID
@@ -360,7 +304,6 @@ configure_localagent()
 	}
 
 	db_set Device.LocalAgent.EndpointID "${EndpointID}"
-	update_db_dump
 }
 
 update_reset_reason()
@@ -377,7 +320,7 @@ configure_controller()
 	local EndpointID Enable 
 	local Protocol Destination
 	local Topic mqtt stomp assigned_role_name AssignedRole ParameterName
-	local Host Port Path EnableEncryption Reference
+	local Host Port Path EnableEncryption Reference SessionMode PeriodicNotifInterval
 	local dm_ref sec
 
 	sec="${1}"
@@ -414,6 +357,15 @@ configure_controller()
 	db_set "${BASEPATH}.Alias" "${sec}"
 	db_set "${BASEPATH}.Enable" "${Enable}"
 	db_set "${BASEPATH}.EndpointID" "${EndpointID}"
+
+	if [ -n "${PeriodicNotifInterval}" ]; then
+		db_set "${BASEPATH}.PeriodicNotifInterval" "${PeriodicNotifInterval}"
+	fi
+
+	if [ -n "${SessionMode}" ]; then
+		db_set "${BASEPATH}.E2ESession.SessionMode" "${SessionMode}"
+	fi
+
 	if [ -n "${assigned_role_name}" ]; then
 		AssignedRole=$(get_role_index "${assigned_role_name}")
 	fi
@@ -454,9 +406,6 @@ configure_controller()
 		db_set "${BASEPATH}.BootParameter.${_pnum}.ParameterName" "${param}"
 		_pnum=$(( _pnum + 1 ))
 	done
-
-	db_set
-	update_db_dump
 }
 
 configure_subscription()
@@ -549,7 +498,6 @@ configure_challenges()
 	sec="${1}"
 	validate_challenge_section "${1}" || {
 		log "Validation of challenge section failed"
-		exit 1;
 	}
 
 	sec="${sec/challenge_/cpe-}"
@@ -582,7 +530,7 @@ configure_challenges()
 
 configure_mtp() {
 	local Enable Protocol ResponseTopicConfigured
-	local Path Port EnableEncryption
+	local Path Port EnableEncryption PublishQoS
 	local stomp mqtt dm_ref sec
 
 	sec="${1}"
@@ -621,6 +569,9 @@ configure_mtp() {
 	if [ "${Protocol}" = "MQTT" ]; then
 		db_set "${BASEPATH}.MQTT.Reference" "${dm_ref}"
 		db_set "${BASEPATH}.MQTT.ResponseTopicConfigured" "${ResponseTopicConfigured}"
+		if [ -n "${PublishQoS}" ]; then
+			db_set "${BASEPATH}.MQTT.PublishQoS" "${PublishQoS}"
+		fi
 	elif [ "${Protocol}" = "STOMP" ]; then
 		db_set "${BASEPATH}.STOMP.Reference" "${dm_ref}"
 		db_set "${BASEPATH}.STOMP.Destination" "${Destination}"
@@ -632,8 +583,6 @@ configure_mtp() {
 		db_set "${BASEPATH}.WebSocket.Port" "${Port}"
 		db_set "${BASEPATH}.WebSocket.EnableEncryption" "${EnableEncryption}"
 	fi
-	db_set
-	update_db_dump
 }
 
 configure_stomp_connection() {
@@ -664,8 +613,6 @@ configure_stomp_connection() {
 	db_set "${BASEPATH}.EnableEncryption" "${EnableEncryption}"
 	db_set "${BASEPATH}.EnableHeartbeats" "${EnableHeartbeats}"
 	db_set "${BASEPATH}.VirtualHost" "${VirtualHost}"
-	db_set
-	update_db_dump
 }
 
 configure_mqtt_client() {
@@ -695,9 +642,6 @@ configure_mqtt_client() {
 	db_set "${BASEPATH}.ProtocolVersion" "${ProtocolVersion}"
 	db_set "${BASEPATH}.TransportProtocol" "${TransportProtocol}"
 	db_set "${BASEPATH}.ClientID" "${ClientID}"
-
-	db_set
-	update_db_dump
 }
 
 
@@ -751,6 +695,9 @@ configure_obuspa() {
 	fi
 
 	if [ -f "${RESET_FILE}" ]; then
+		if [ -f "${SQL_DB_FILE}" ]; then
+			mv ${SQL_DB_FILE} ${SQL_DB_FILE}.old
+		fi
 		procd_append_param command -r ${RESET_FILE}
 	fi
 
@@ -795,9 +742,9 @@ get_param_value_from_dump()
 		return 0
 	fi
 
-	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $3}')"
+	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $2}')"
 
-	echo "$value"
+	echo "${value//\"/}"
 }
 
 update_uci_sec()
@@ -821,7 +768,7 @@ sync_db_controller()
 {
 	local cntrs copts sec pvalue protocol
 
-	copts="Enable EndpointID AssignedRole"
+	copts="Enable EndpointID AssignedRole PeriodicNotifInterval"
 	popts="Destination Topic Reference Host Port Path EnableEncryption"
 
 	cntrs="$(get_instances_from_db_dump Device.LocalAgent.Controller.)"
@@ -854,7 +801,7 @@ sync_db_localagent_mtp()
 	local mtps opts popts sec pvalue protocol
 
 	opts="Enable"
-	popts="ResponseTopicConfigured Destination Port Path Reference EnableEncryption"
+	popts="ResponseTopicConfigured Destination Port Path Reference EnableEncryption PublishQoS"
 	ropts="mqtt stomp"
 
 	mtps="$(get_instances_from_db_dump Device.LocalAgent.MTP.)"
@@ -970,10 +917,8 @@ delete_sql_db_entry_with_pattern()
 		return 0;
 	fi
 
-	params="$(grep "${pattern}" ${DB_DUMP}|awk '{print $1}')"
-	for p in ${params}; do
-		db_del_sql "${p}"
-	done
+	#log "Deleting with pattern [${pattern}] from ${DB_DUMP}"
+	sed -i "/${pattern}/d" ${DB_DUMP}
 }
 
 check_n_delete_db()
@@ -989,7 +934,7 @@ check_n_delete_db()
 	r="${3}"
 	sec="${sec/${t}_/cpe-}"
 
-	path=$(grep "${r}\d.Alias => ${sec}" ${DB_DUMP})
+	path=$(grep "${r}\d.Alias \"${sec}\"" ${DB_DUMP})
 	path=${path%.*}
 
 	delete_sql_db_entry_with_pattern "${path}"
@@ -1017,28 +962,42 @@ db_init()
 
 	reason="${1}"
 	mkdir -p /tmp/obuspa/
+
 	# Load configuration
 	config_load $CONFIGURATION
 	config_get SQL_DB_FILE global db_file "/tmp/obuspa/usp.db"
 
+	if [ -f "${SQL_DB_FILE}.old" ] && [ ! -f "${SQL_DB_FILE}" ]; then
+		log "Copying old db, since new db not present ..."
+		mv ${SQL_DB_FILE}.old ${SQL_DB_FILE}
+	fi
+
 	# Dump datamodel parameters from DB
 	if [ -f "${SQL_DB_FILE}" ]; then
-		${PROG} -f ${SQL_DB_FILE} -c show database |sort > ${DB_DUMP}
+		dump_db
 	fi
 
-	# Only sync uci with db in case of non service triggers
+	# In case of Reboot or service restart update the uci
+        # from usp.db file
 	if [ -f "${DB_DUMP}" ] && [ "${reason}" != "update" ]; then
-		sync_uci_with_db
+		# Only do this if db have reasonable data
+		val="$(awk 'END{print NR}' ${DB_DUMP})"
+		if [ "$val" -gt 15 ]; then
+			log "Syncing obuspa uci with usp.db ...."
+			sync_uci_with_db
+		fi
 	fi
 
-	# remove entries from db if deleted from uci
+	# remove entries from db if deleted from uci, only in case of reload
 	if [ -f "${DB_DUMP}" ] && [ "${reason}" = "update" ] && [ -f "/tmp/obuspa/obuspa" ]; then
+		log "Deleting entries from usp.db if uci not present ...."
 		reverse_update_db_with_uci
 	fi
 
 	# Remove reset file if present
-	[ -f "${RESET_FILE}" ] && rm -f ${RESET_FILE}
+	[ -f "${RESET_FILE}" ] && mv ${RESET_FILE} ${RESET_FILE}.old
 
+	#log "Create reset file ...."
 	config_load $CONFIGURATION
 	global_init
 	config_foreach configure_localagent localagent
@@ -1059,8 +1018,9 @@ db_init()
 	uci_commit ${CONFIGURATION}
 
 	cp /etc/config/obuspa /tmp/obuspa/
-
-	[ -f "${DB_DUMP}" ] && rm -f ${DB_DUMP}
+	if [ -f "${DB_DUMP}" ]; then
+		mv ${DB_DUMP} ${RESET_FILE}
+	fi
 
 	return 0;
 }
@@ -1075,14 +1035,10 @@ register_service()
 			"${respawn_threshold:-5}" \
 			"${respawn_timeout:-10}" "${respawn_retry:-3}"
 
-	procd_set_param watch usp.raw
+	procd_set_param watch bbfdm
 	procd_close_instance
 }
 
-service_running() {
-	publish_endpoint
-}
-
 start_service() {
 	local enabled
 
@@ -1113,7 +1069,7 @@ service_triggers() {
 	# Create a reload trigger if schema update avaialble
 	procd_open_trigger
 		json_add_array
-			json_add_string "" "usp.raw"
+			json_add_string "" "bbfdm"
 			json_add_array
 				json_add_string "" "if"
 				json_add_array

obuspa/files/etc/uci-defaults/50-add-mqtt-usp-test

@@ -1,14 +0,0 @@
-add_usp_test()
-{
-        if ! uci_get mosquitto usptest >/dev/null 2>&1; then
-                uci_add mosquitto listener usptest
-                uci_set mosquitto usptest enabled 1
-                uci_set mosquitto usptest port '9001'
-                uci_set mosquitto usptest protocol 'websockets'
-                uci_set mosquitto usptest require_certificates '0'
-                uci_set mosquitto usptest auth_plugin '/usr/lib/mosquitto_auth_shadow.so'
-        fi
-}
-
-uci_load mosquitto
-add_usp_test

obuspa/patches/0001-validate-controller-mtp.patch

@@ -0,0 +1,117 @@
+diff --git a/src/core/device.h b/src/core/device.h
+index 5ca0782..ee6d88c 100644
+--- a/src/core/device.h
++++ b/src/core/device.h
+@@ -157,6 +157,9 @@ int DEVICE_CONTROLLER_Start(void);
+ void DEVICE_CONTROLLER_Stop(void);
+ int DEVICE_CONTROLLER_FindInstanceByEndpointId(char *endpoint_id);
+ int DEVICE_CONTROLLER_QueueBinaryMessage(mtp_send_item_t *msi, char *endpoint_id, char *usp_msg_id, mtp_reply_to_t *mtp_reply_to, time_t expiry_time);
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++bool DEVICE_CONTROLLER_IsMTPAllowed(char *endpoint_id, mtp_reply_to_t *mrt);
++#endif
+ bool DEVICE_CONTROLLER_IsMTPConfigured(char *endpoint_id, mtp_protocol_t protocol);
+ char *DEVICE_CONTROLLER_FindEndpointIdByInstance(int instance);
+ char *DEVICE_CONTROLLER_FindEndpointByMTP(mtp_reply_to_t *mrt);
+diff --git a/src/core/device_controller.c b/src/core/device_controller.c
+index ae609f5..a6335f5 100644
+--- a/src/core/device_controller.c
++++ b/src/core/device_controller.c
+@@ -900,6 +900,78 @@ int DEVICE_CONTROLLER_QueueBinaryMessage(mtp_send_item_t *msi, char *endpoint_id
+     return USP_ERR_OK;
+ }
+ 
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++/*********************************************************************//**
++**
++** DEVICE_CONTROLLER_IsMTPAllowed
++**
++** Determines whether an MTP is allowed to be used by the specified controller
++** This function is used by ValidateUspRecord() to determine whether to process a received USP message
++**
++** \param   endpoint_id - Endpoint ID of controller that sent a USP message
++** \param   mrt - pointer to structure specifying on which MTP the message was received
++**
++** \return  true if the MTP is allowed, false otherwise
++**
++**************************************************************************/
++bool DEVICE_CONTROLLER_IsMTPAllowed(char *endpoint_id, mtp_reply_to_t *mrt)
++{
++    controller_t *cont = FindEnabledControllerByEndpointId(endpoint_id);
++    controller_mtp_t *mtp;
++
++    // Disallow if no controller instance is found
++    if (cont == NULL)
++    {
++        return false;
++    }
++
++    mtp = FindFirstEnabledMtp(cont, mrt->protocol);
++
++#ifdef ENABLE_WEBSOCKETS
++    // Allow websocket server if no other MTP is configured
++    if ((mrt->protocol == kMtpProtocol_WebSockets) && (mrt->wsserv_conn_id != INVALID))
++    {
++        return mtp == NULL;
++    }
++#endif
++
++    // Disallow if there is no MTP configured with matching protocol
++    if ((mtp == NULL) || (mtp->protocol != mrt->protocol))
++    {
++        return false;
++    }
++
++    // Check that the configured MTP matches the MTP on which the message was received
++    switch(mtp->protocol)
++    {
++#ifndef DISABLE_STOMP
++        case kMtpProtocol_STOMP:
++            return mtp->stomp_connection_instance == mrt->stomp_instance;
++#endif
++
++#ifdef ENABLE_COAP
++        case kMtpProtocol_CoAP:
++            return true;  // More detailed checks are not implemented for CoAP
++#endif
++
++#ifdef ENABLE_MQTT
++        case kMtpProtocol_MQTT:
++            return mtp->mqtt_connection_instance == mrt->mqtt_instance;
++#endif
++
++#ifdef ENABLE_WEBSOCKETS
++        case kMtpProtocol_WebSockets:
++            return (mrt->wsclient_cont_instance == cont->instance) && (mrt->wsclient_mtp_instance == mtp->instance);
++#endif
++        default:
++            TERMINATE_BAD_CASE(mtp->protocol);
++            break;
++    }
++
++    return false;
++}
++#endif
++
+ /*********************************************************************//**
+ **
+ ** DEVICE_CONTROLLER_IsMTPConfigured
+diff --git a/src/core/msg_handler.c b/src/core/msg_handler.c
+index 8313342..a953562 100644
+--- a/src/core/msg_handler.c
++++ b/src/core/msg_handler.c
+@@ -759,6 +759,15 @@ int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt)
+         return USP_ERR_RECORD_FIELD_INVALID;
+     }
+ 
++#ifdef OBUSPA_CONTROLLER_MTP_VERIFY
++    // Exit if the controller is not allowed to use the MTP on which the message was received
++    if (DEVICE_CONTROLLER_IsMTPAllowed(rec->from_id, mrt) == false)
++    {
++        USP_ERR_SetMessage("%s: Ignoring message from endpoint_id=%s (unauthorized MTP)", __FUNCTION__, rec->from_id);
++        return USP_ERR_PERMISSION_DENIED;
++    }
++#endif
++
+     // Exit if the controller is unknown
+     cur_msg_controller_instance = DEVICE_CONTROLLER_FindInstanceByEndpointId(rec->from_id);
+     if (cur_msg_controller_instance == INVALID)

obuspa/patches/0003-set-internal-role-fix.patch

@@ -10,7 +10,7 @@
      {
 --- a/src/core/data_model.h
 +++ b/src/core/data_model.h
-@@ -324,6 +324,7 @@ void DATA_MODEL_DumpSchema(void);
+@@ -325,6 +325,7 @@ void DATA_MODEL_DumpSchema(void);
  void DATA_MODEL_DumpInstances(void);
  char DATA_MODEL_GetJSONParameterType(char *path);
  int DATA_MODEL_SetParameterInDatabase(char *path, char *value);

obuspa/patches/0004-suppress-notification-logs.patch

@@ -1,6 +1,6 @@
 --- a/src/core/data_model.c
 +++ b/src/core/data_model.c
-@@ -1239,7 +1239,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
+@@ -1242,7 +1242,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
      // Exit if instance already exists - nothing to do
      if (exists)
      {
@@ -9,7 +9,7 @@
          return USP_ERR_CREATION_FAILURE;
      }
  
-@@ -1324,7 +1324,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
+@@ -1327,7 +1327,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
      // Exit if instance does not exist - nothing to do
      if (exists == false)
      {

obuspa/patches/0006-bdc_json_obj_hierarchy.patch

@@ -0,0 +1,372 @@
+diff --git a/src/core/bdc_exec.c b/src/core/bdc_exec.c
+index 6b5c11d..3670361 100644
+--- a/src/core/bdc_exec.c
++++ b/src/core/bdc_exec.c
+@@ -548,9 +548,14 @@ int StartSendingReport(bdc_connection_t *bc)
+     // Set the list of headers
+     bc->headers = NULL;
+     bc->headers = curl_slist_append(bc->headers, "Content-Type: application/json; charset=UTF-8");
+-    bc->headers = curl_slist_append(bc->headers, "BBF-Report-Format: NameValuePair");
++    if (bc->flags & BDC_FLAG_HEADER_OBJ_HIER)
++        bc->headers = curl_slist_append(bc->headers, "BBF-Report-Format: ObjectHierarchy");
++    else
++        bc->headers = curl_slist_append(bc->headers, "BBF-Report-Format: NameValuePair");
++
+     if (bc->flags & BDC_FLAG_GZIP)
+     {
++        curl_easy_setopt(curl_ctx, CURLOPT_ACCEPT_ENCODING, "gzip");
+         bc->headers = curl_slist_append(bc->headers, "Content-Encoding: gzip");
+     }
+ 
+diff --git a/src/core/bdc_exec.h b/src/core/bdc_exec.h
+index c58c6d5..ff37a2d 100644
+--- a/src/core/bdc_exec.h
++++ b/src/core/bdc_exec.h
+@@ -53,6 +53,6 @@ void BDC_EXEC_ScheduleExit(void);
+ #define BDC_FLAG_PUT            0x00000001  // If set, HTTP PUT should be used instead of HTTP POST when sending the report to the BDC server
+ #define BDC_FLAG_GZIP           0x00000002  // If set, the reports contants are Gzipped
+ #define BDC_FLAG_DATE_HEADER    0x00000004  // If set, the date header should be included in the HTTP post.
+-
++#define BDC_FLAG_HEADER_OBJ_HIER 0x00000008 // If set, report format in header would be ObjectHierarchy otherwise NameValuePair 
+ 
+ #endif
+diff --git a/src/core/device_bulkdata.c b/src/core/device_bulkdata.c
+index 5b1aff2..a7d1b3e 100755
+--- a/src/core/device_bulkdata.c
++++ b/src/core/device_bulkdata.c
+@@ -68,7 +68,8 @@
+ //------------------------------------------------------------------------------
+ // Definitions for formats that we support
+ #define BULKDATA_ENCODING_TYPE "JSON"
+-#define BULKDATA_JSON_REPORT_FORMAT "NameValuePair"
++#define BULKDATA_JSON_REPORT_FORMAT_NAME_VALUE "NameValuePair"
++#define BULKDATA_JSON_REPORT_FORMAT_OBJ_HIER "ObjectHierarchy"
+ 
+ 
+ // Definitions for Device.BulkData.Profile.{i}.JSONEncoding.ReportTimestamp
+@@ -159,6 +160,7 @@ typedef struct
+     char compression[9];
+     char method[9];
+     bool use_date_header;
++    char report_format[20];
+ } profile_ctrl_params_t;
+ 
+ //------------------------------------------------------------------------------
+@@ -233,7 +235,7 @@ bulkdata_profile_t *bulkdata_find_free_profile(void);
+ bulkdata_profile_t *bulkdata_find_profile(int profile_id);
+ int bulkdata_calc_report_map(bulkdata_profile_t *bp, kv_vector_t *report_map);
+ int bulkdata_reduce_to_alt_name(char *spec, char *path, char *alt_name, char *out_buf, int buf_len);
+-char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp);
++char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp, char *report_format);
+ unsigned char *bulkdata_compress_report(profile_ctrl_params_t *ctrl, char *input_buf, int input_len, int *p_output_len);
+ int bulkdata_schedule_sending_http_report(profile_ctrl_params_t *ctrl, bulkdata_profile_t *bp, unsigned char *json_report, int report_len);
+ int bulkdata_start_profile(bulkdata_profile_t *bp);
+@@ -307,7 +309,7 @@ int DEVICE_BULKDATA_Init(void)
+     err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.Parameter.{i}.Reference", "", Validate_BulkDataReference, NULL, DM_STRING);
+ 
+     // Device.BulkData.Profile.{i}.JSONEncoding
+-    err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.JSONEncoding.ReportFormat", BULKDATA_JSON_REPORT_FORMAT, Validate_BulkDataReportFormat, NULL, DM_STRING);
++    err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.JSONEncoding.ReportFormat", BULKDATA_JSON_REPORT_FORMAT_NAME_VALUE, Validate_BulkDataReportFormat, NULL, DM_STRING);
+     err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.JSONEncoding.ReportTimestamp", BULKDATA_JSON_TIMESTAMP_FORMAT_EPOCH, Validate_BulkDataReportTimestamp, NULL, DM_STRING);
+ 
+     // Device.BulkData.Profile.{i}.HTTP
+@@ -661,9 +663,11 @@ int Validate_BulkDataReference(dm_req_t *req, char *value)
+ int Validate_BulkDataReportFormat(dm_req_t *req, char *value)
+ {
+     // Exit if trying to set a value outside of the range we accept
+-    if (strcmp(value, BULKDATA_JSON_REPORT_FORMAT) != 0)
++    if (strcmp(value, BULKDATA_JSON_REPORT_FORMAT_NAME_VALUE) != 0 &&
++	    strcmp(value, BULKDATA_JSON_REPORT_FORMAT_OBJ_HIER) != 0)
+     {
+-        USP_ERR_SetMessage("%s: Only JSON Report Format supported is '%s'", __FUNCTION__, BULKDATA_JSON_REPORT_FORMAT);
++        USP_ERR_SetMessage("%s: Only JSON Report Format supported are '%s', '%s'", __FUNCTION__,
++			BULKDATA_JSON_REPORT_FORMAT_NAME_VALUE, BULKDATA_JSON_REPORT_FORMAT_OBJ_HIER);
+         return USP_ERR_INVALID_VALUE;
+     }
+ 
+@@ -1974,6 +1978,14 @@ int bulkdata_platform_get_profile_control_params(bulkdata_profile_t *bp, profile
+         return err;
+     }
+ 
++    // Exit if unable to get ReportFormat
++    USP_SNPRINTF(path, sizeof(path), "Device.BulkData.Profile.%d.JSONEncoding.ReportFormat", bp->profile_id);
++    err = DATA_MODEL_GetParameterValue(path, ctrl_params->report_format, sizeof(ctrl_params->report_format), 0);
++    if (err != USP_ERR_OK)
++    {
++        return err;
++    }
++
+     return USP_ERR_OK;
+ }
+ 
+@@ -2249,7 +2261,7 @@ void bulkdata_process_profile_http(bulkdata_profile_t *bp)
+     }
+ 
+     // Exit if unable to generate the report
+-    json_report = bulkdata_generate_json_report(bp, ctrl.report_timestamp);
++    json_report = bulkdata_generate_json_report(bp, ctrl.report_timestamp, ctrl.report_format);
+     if (json_report == NULL)
+     {
+         USP_ERR_SetMessage("%s: bulkdata_generate_json_report failed", __FUNCTION__);
+@@ -2299,7 +2311,8 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+     kv_pair_t kv;
+     report_t *cur_report;
+     char *json_report;
+-    char report_timestamp[33];
++    char report_timestamp[33] = {0};
++    char report_format[20] = {0};
+ 
+     // Exit if the MTP has not been connected to successfully after bootup
+     // This is to prevent BDC events being enqueued before the Boot! event is sent (the Boot! event is only sent after successfully connecting to the MTP).
+@@ -2316,6 +2329,14 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+         return;
+     }
+ 
++    // Exit if unable to get ReportFormat
++    USP_SNPRINTF(path, sizeof(path), "Device.BulkData.Profile.%d.JSONEncoding.ReportFormat", bp->profile_id);
++    err = DATA_MODEL_GetParameterValue(path, report_format, sizeof(report_format), 0);
++    if (err != USP_ERR_OK)
++    {
++        return;
++    }
++
+     // When sending via USP events, only one report is ever sent in each USP event
+     // So ensure all retained reports are removed. NOTE: Clearing the reports here is only necessary when switching protocol from HTTP to USP event, and where HTTP had some unsent reports
+     bulkdata_clear_retained_reports(bp);
+@@ -2333,7 +2354,7 @@ void bulkdata_process_profile_usp_event(bulkdata_profile_t *bp)
+     bp->num_retained_reports = 1;
+ 
+     // Exit if unable to generate the report
+-    json_report = bulkdata_generate_json_report(bp, report_timestamp);
++    json_report = bulkdata_generate_json_report(bp, report_timestamp, report_format);
+     if (json_report == NULL)
+     {
+         USP_ERR_SetMessage("%s: bulkdata_generate_json_report failed", __FUNCTION__);
+@@ -2545,21 +2566,7 @@ int bulkdata_reduce_to_alt_name(char *spec, char *path, char *alt_name, char *ou
+     return USP_ERR_OK;
+ }
+ 
+-/*********************************************************************//**
+-**
+-**  bulkdata_generate_json_report
+-**
+-**  Generates a JSON name-value pair format report
+-**  NOTE: The report contains all retained failed reports, as well as the current report
+-**  See TR-157 section A.4.2 (end) for an example, and section A.3.5.2 for layout of content containing failed report transmissions
+-**
+-** \param   bp - pointer to bulk data profile containing all reports (current and retained)
+-** \param   report_timestamp - value of Device.BulkData.Profile.{i}.JSONEncoding.ReportTimestamp
+-**
+-** \return  pointer to NULL terminated dynamically allocated buffer containing the serialized report to send
+-**
+-**************************************************************************/
+-char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp)
++static char *create_json_name_value_pair_report(bulkdata_profile_t *bp, char *report_timestamp)
+ {
+     JsonNode *top;          // top of report
+     JsonNode *array;        // array of reports (retained + current)
+@@ -2574,7 +2581,6 @@ char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timesta
+     long long value_as_ll;
+     unsigned long long value_as_ull;
+     bool value_as_bool;
+-    char *result;
+     int i, j;
+     char buf[32];
+     kv_pair_t *kv;
+@@ -2597,7 +2603,7 @@ char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timesta
+         }
+         else if (strcmp(report_timestamp, "ISO-8601")==0)
+         {
+-            result = iso8601_from_unix_time(report->collection_time, buf, sizeof(buf));
++            char *result = iso8601_from_unix_time(report->collection_time, buf, sizeof(buf));
+             if (result != NULL)
+             {
+                 json_append_member(element, "CollectionTime", json_mkstring(buf));
+@@ -2656,11 +2662,174 @@ char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timesta
+     json_append_member(top, "Report", array);
+ 
+     // Serialize the JSON tree
+-    result = json_stringify(top, " ");
++    char *output = json_stringify(top, " ");
++
++    // Clean up the JSON tree
++    json_delete(top);        // Other JsonNodes which are children of this top level tree will be deleted
++
++    return output;
++}
++
++static char *create_json_obj_hier_report(bulkdata_profile_t *bp, char *report_timestamp)
++{
++    JsonNode *top;          // top of report
++    JsonNode *array;        // array of reports (retained + current)
++    JsonNode *element;      // element of json array, containing an individual report
++    JsonNode *temp;
++    char *param_path;
++    char *param_type_value;
++    char param_type;
++    char *param_value;
++    kv_vector_t *report_map;
++    report_t *report;
++    double value_as_number;
++    long long value_as_ll;
++    unsigned long long value_as_ull;
++    bool value_as_bool;
++    int i, j;
++    char buf[32];
++    kv_pair_t *kv;
++    int err;
++
++    top = json_mkobject();
++    array = json_mkarray();
++
++    // Iterate over all reports adding them to the JSON array
++    for (i=0; i < bp->num_retained_reports; i++)
++    {
++        report = &bp->reports[i];
++        report_map = &report->report_map;
++
++        // Add Collection time to each json report element (only if specified and not 'None')
++        element = json_mkobject();
++        if (strcmp(report_timestamp, "Unix-Epoch")==0)
++        {
++            json_append_member(element, "CollectionTime", json_mknumber(report->collection_time));
++        }
++        else if (strcmp(report_timestamp, "ISO-8601")==0)
++        {
++            char *result = iso8601_from_unix_time(report->collection_time, buf, sizeof(buf));
++            if (result != NULL)
++            {
++                json_append_member(element, "CollectionTime", json_mkstring(buf));
++            }
++        }
++
++        temp = element;
++        // Iterate over each parameter, adding it to the json element. Take account of the parameter's type
++        for (j=0; j < report_map->num_entries; j++)
++        {
++            char buff[2056] = {0};
++            char *pch = NULL, *pchr = NULL, *argv[128] = {0};
++            int n = 0;
++
++            kv = &report_map->vector[j];
++            param_path = kv->key;
++            param_type_value = kv->value;
++            param_type = param_type_value[0];           // First character denotes the type of the parameter
++            param_value = &param_type_value[1];         // Subsequent characters contain the parameter's value
++
++            strncpy(buff, param_path, sizeof(buff));
++            for (pch = strtok_r(buff, ".", &pchr); pch != NULL; pch = strtok_r(NULL, ".", &pchr)) {
++                int idx;
++                JsonNode *obj = element;
++                argv[n] = pch;
++
++                for (idx = 0; idx <= n; idx++) {
++                    if (obj == NULL)
++                        break;
++                    obj = json_find_member(obj, argv[idx]);
++                }
++
++                if (obj)
++                    temp = obj;
++                else {
++                    if (pchr != NULL && *pchr != '\0') {
++                        // It is a DMOBJ
++                        JsonNode *new = json_mkobject();
++                        json_append_member(temp, pch, new);
++                        temp = new;
++                    } else {
++                        // It is a DMPARAM
++                        switch (param_type)
++                        {
++                            case 'S':
++                                json_append_member(temp, pch, json_mkstring(param_value) );
++                                break;
++
++                            case 'U':
++                                value_as_ull = strtoull(param_value, NULL, 10);
++                                json_append_member(temp, pch, json_mkulonglong(value_as_ull) );
++                                break;
++
++                            case 'L':
++                                value_as_ll = strtoll(param_value, NULL, 10);
++                                json_append_member(temp, pch, json_mklonglong(value_as_ll) );
++                                break;
++
++                            case 'N':
++                                value_as_number = atof(param_value);
++                                json_append_member(temp, pch, json_mknumber(value_as_number) );
++                                break;
++
++                            case 'B':
++                                err = TEXT_UTILS_StringToBool(param_value, &value_as_bool);
++                                if (err == USP_ERR_OK)
++                                {
++                                    json_append_member(temp, pch, json_mkbool(value_as_bool) );
++                                }
++                                break;
++
++                            default:
++                                USP_ERR_SetMessage("%s: Invalid JSON parameter type ('%c') in report map for %s", __FUNCTION__, param_type_value[0], param_path);
++                                break;
++                        }
++                    }
++                }
++		n++;
++            }
++        }
++
++        // Add the json element to the json array
++        json_append_element(array, element);
++    }
++
++    // Finally add the array to the report top level
++    json_append_member(top, "Report", array);
++
++    // Serialize the JSON tree
++    char *output = json_stringify(top, " ");
+ 
+     // Clean up the JSON tree
+     json_delete(top);        // Other JsonNodes which are children of this top level tree will be deleted
+ 
++    return output;
++}
++
++/*********************************************************************//**
++**
++**  bulkdata_generate_json_report
++**
++**  Generates a JSON name-value pair or object-hierarchy format report
++**  NOTE: The report contains all retained failed reports, as well as the current report
++**  See TR-157 section A.4.2 (end) for an example, and section A.3.5.2 for layout of content containing failed report transmissions
++**
++** \param   bp - pointer to bulk data profile containing all reports (current and retained)
++** \param   report_timestamp - value of Device.BulkData.Profile.{i}.JSONEncoding.ReportTimestamp
++**
++** \return  pointer to NULL terminated dynamically allocated buffer containing the serialized report to send
++**
++**************************************************************************/
++char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp, char *report_format)
++{
++    char *result = NULL;
++
++    if (strcmp(report_format, BULKDATA_JSON_REPORT_FORMAT_NAME_VALUE) == 0) {
++	    result = create_json_name_value_pair_report(bp, report_timestamp);
++    } else if (strcmp(report_format, BULKDATA_JSON_REPORT_FORMAT_OBJ_HIER) == 0) {
++	    result = create_json_obj_hier_report(bp, report_timestamp);
++    }
++
+     return result;
+ }
+ 
+@@ -2817,6 +2986,11 @@ int bulkdata_schedule_sending_http_report(profile_ctrl_params_t *ctrl, bulkdata_
+         flags |= BDC_FLAG_DATE_HEADER;
+     }
+ 
++    if (strcmp(ctrl->report_format, BULKDATA_JSON_REPORT_FORMAT_OBJ_HIER) == 0)
++    {
++        flags |= BDC_FLAG_HEADER_OBJ_HIER;
++    }
++
+     // Exit if failed to post a message to BDC thread
+     // NOTE: Ownership of full_url, query_string, report, username and password passes to BDC_EXEC
+     err = BDC_EXEC_PostReportToSend(bp->profile_id, full_url, query_string, username, password, report, report_len, flags);