map-controller: 2.8.0.29

Support decode codecs cap list to improve decoding flexibility and robustness

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -0,0 +1,31 @@
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
+	default y
+
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
+config BBF_TR143
+	bool "Enable TR-143 Data Model Support"
+	default y
+
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default y
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default y
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255

bbf/Makefile

@@ -0,0 +1,181 @@
+#
+# Copyright (C) 2022 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.8.9.38
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
+PKG_SOURCE_VERSION:=aa2ce1bf46bb5ff271402fccb9e73e6c63c65695
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for libbbfdm API
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
+
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+endef
+
+define Package/libbbfdm/default/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
+endef
+
+define Package/libbbfdm/default/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbfdm/Config_bbfdm.in

@@ -1,17 +0,0 @@
-if PACKAGE_libbbfdm
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_OBFUSCATION_KEY
-	string "Obfuscation key"
-	default "371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04"
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255
-endif

bbfdm/Makefile

@@ -1,180 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.9.16
-
-USE_LOCAL:=0
-ifneq ($(USE_LOCAL),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=93a6f6f51c3edb88aa63f150ef077d9f70cb883b
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-include bbfdm.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libopenssl
-  MENU:=1
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +libbbfdm +jq +bbf_configmngr
-endef
-
-define Package/bbf_configmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:= BBF Config Manager
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json
-  MENU:=1
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/bbf_configmngr/config
-	source "$(SOURCE)/bbf_configmngr.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree, It includes basic TR181 nodes.
-endef
-
-define Package/bbf_configmngr/description
- Daemon for handling bbf reload services via ubus bbf.config
-endef
-
-ifeq ($(USE_LOCAL),1)
-define Build/Prepare
-	$(CP) ~/git/bbfdm/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.secure $(1)/usr/libexec/rpcd/bbf.secure
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts/
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_api $(1)/usr/share/bbfdm/scripts/
-
-	$(INSTALL_DIR) $(1)/etc/bbfdm/certificates
-	echo "$(CONFIG_BBF_OBFUSCATION_KEY)" > $(1)/etc/bbfdm/.secure_hash
-endef
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/usr/share/bbfdm/libbbfdm.so
-
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/etc/uci-defaults/91-fix-bbfdmd-enabled-option $(1)/etc/uci-defaults/
-
-ifeq ($(findstring iopsys,$(CONFIG_BBF_VENDOR_LIST)),iopsys)
-	$(BBFDM_INSTALL_CORE_PLUGIN) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/iopsys/libbbfdm_iopsys_ext.so $(1)
-endif
-
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts/
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_activate_handler.sh $(1)/usr/share/bbfdm/scripts/
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_check_idle.sh $(1)/usr/share/bbfdm/scripts/
-endef
-
-define Package/libbbfdm/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/bbfdm/input.json $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdm.services $(1)/etc/init.d/
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-endef
-
-define Package/bbf_configmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-ifeq ($(CONFIG_BBF_CONFIGMNGR_C_BACKEND),y)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/bbf_configd $(1)/usr/sbin/
-	$(INSTALL_BIN) ./files/etc/init.d/bbf_configd $(1)/etc/init.d/bbf_configd
-endif
-ifeq ($(CONFIG_BBF_CONFIGMNGR_SCRIPT_BACKEND),y)
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.config $(1)/usr/libexec/rpcd/bbf.config
-endif
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-endef
-
-$(eval $(call BuildPackage,bbf_configmngr))
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,bbfdmd))

bbfdm/README.md

@@ -1,38 +0,0 @@
-# BBFDM configuration options and utilities
-
-bbfdm provides few compile time configuration options and compile time help utility called [bbfdm.mk](./bbfdm.mk), this document aimed to explain the available usages and best practices.
-
-## Compilation options
-
-|  Configuration option    | Description   | Default Value |
-| -----------------------  | ------------- | ----------- |
-| CONFIG_BBF_VENDOR_LIST   | List of vendor extension directories | iopsys        |
-| CONFIG_BBF_VENDOR_PREFIX | Prefix for Vendor extension datamodel objects/parameters | X_IOPSYS_EU_  |
-| CONFIG_BBF_MAX_OBJECT_INSTANCES | Maximum number of instances per object | 255    |
-| BBF_OBFUSCATION_KEY      | Hash used to encode/decode in `bbf.secure` object | 371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04 |
-
-
-#### BBF_OBFUSCATION_KEY
-
-`bbfdm` provides an ubus object called `bbf.secure` to allow encoding/decoding the values, `bbf.secure` currently support following methods internally to encode/decode
-
-  - Encode/Decode using a predefined SHA512 Hash key
-  - Encode/Decode using a private/public RSA key pair
-
-The `BBF_OBFUSCATION_KEY` compile time configuration option used to defined the SHA512 HASH, if this option is undefined, then it usages a default value as mention in the above table.
-
-User must override this parameter with their own hash value, to generate a hash user can run below command and copy the hash value to this option.
-
-ex: User wants to use 'Sup3rS3cur3Passw0rd' as passkey, then can get the SHA512 sum with
-
-```bash
-$ echo -n "Sup3rS3cur3Passw0rd" | sha512sum
-371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04  -
-```
-
-> Note: Additionally, user can install RSA private key in '/etc/bbfdm/certificates/private_key.pem' path, if private key is present `bbf.secure` shall use rsa private certificate for encrypt/decrypt function. In case of key not present in the pre-defined path, hash will be used for the same.
-
-## Helper utility (bbfdm.mk)
-
-bbfdm provides a helper utility [bbfdm.mk](./bbfdm.mk) to install datamodel plugins in bbfdm core or in microservice directory.
-

bbfdm/bbf_configmngr.in

@@ -1,19 +0,0 @@
-if PACKAGE_bbf_configmngr
-choice
-	prompt "Select backend daemon for bbf.config"
-	default BBF_CONFIGMNGR_C_BACKEND
-	help
-		Select which backend daemon should be used for ubus bbf.config
-
-config BBF_CONFIGMNGR_SCRIPT_BACKEND
-	bool "Use shell script backend"
-	help
-		Enable this option to use shell script as the backend for bbf.config. This can be useful for quick and easy scripting of configuration tasks.
-
-config BBF_CONFIGMNGR_C_BACKEND
-	bool "Use C code backend"
-	help
-		Enable this option to use a C code implementation as the backend for bbf.config. This option is generally preferred for performance-critical tasks and scenarios requiring more robust and efficient handling.
-
-endchoice
-endif

bbfdm/bbfdm.mk

@@ -1,114 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-BBFDM_BASE_DM_PATH=/usr/share/bbfdm
-BBFDM_INPUT_PATH=/etc/bbfdm/micro_services
-BBFDM_DIR:=$(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-
-#BBFDM_VERSION:=$(shell grep -oP '(?<=^PKG_VERSION:=).*' ${BBFDM_DIR}/Makefile)
-#BBFDM_TOOLS:=$(BUILD_DIR)/bbfdm-$(BBFDM_VERSION)/tools
-
-# Utility to install the plugin in bbfdm core path with priority.
-# Its now possible to overwrite/remove core datamodel with plugin, so, if some
-# datamodel objects/parameters are present in more than one plugin, order in
-# which they loaded into memory becomes crucial, this Utility help to configure
-# a priority order in which they gets loaded in memory.
-#
-# ARGS:
-#  $1 => Plugin artifact
-#  $2 => package install directory
-#  $3 => Priority of the installed plugin (Optional)
-#
-# Note:
-# - Last loaded plugin gets the highest priority
-#
-# Example:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)
-#
-# Example to install plugin with priority:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1) 01
-#
-BBFDM_INSTALL_CORE_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -p
-
-
-# Utility to install the micro-service datamodel
-# Use Case:
-# user wants to run a datamodel micro-service, it required to install the
-# DotSO/JSON plugin into a bbf shared directory, this utility helps in
-# installing the DotSO/JSON plugin in bbfdm shared directory, and auto-generate
-# input file for the micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - There could be only one main plugin file, so its bind to PKG_NAME
-# - Micro-service input.json will be auto generated with this call
-# - Use -u (optional argument) to overwrite ubus object name
-#
-# Example:
-#  BBFDM_INSTALL_MS_DM $(PKG_BUILD_DIR)/libcwmp.so $(1) $(PKG_NAME)
-#
-BBFDM_INSTALL_MS_DM:=$(BBFDM_DIR)/tools/bbfdm.sh -m
-
-
-# Utility to install a plugins in datamodel micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - Use the service_name/PKG_NAME of the service in which this has to run
-#
-# Example:
-#  BBFDM_INSTALL_MS_PLUGIN $(PKG_BUILD_DIR)/libxmpp.so $(1) icwmp
-#
-BBFDM_INSTALL_MS_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -m -p
-
-# Utility to install the helper scripts in default bbfdm script path
-#
-# Use Case:
-# User want to install some script for running diagnostics
-#
-# ARGS:
-#  $1 => Script with complete path
-#  $2 => package install directory
-#
-# Note:
-# - Use with -d option to install script in bbf.diag directory
-#
-# Example:
-#  BBFDM_INSTALL_SCRIPT $(PKG_BUILD_DIR)/download $(1)
-#  BBFDM_INSTALL_SCRIPT -d $(PKG_BUILD_DIR)/ipping $(1)
-#
-BBFDM_INSTALL_SCRIPT:=$(BBFDM_DIR)/tools/bbfdm.sh -s
-
-# Deprecated functions errors
-define BbfdmInstallPluginInMicroservice
-	$(warning # BbfdmInstallPluginInMicroservice function is deprecated, use BBFDM_INSTALL_MS_PLUGIN macro #)
-	$(INSTALL_DIR) $(1)
-	$(INSTALL_DATA) $(2) $(1)/
-endef
-
-define BbfdmInstallMicroServiceInputFile
-	$(warning # function BbfdmInstallMicroServiceInputFile deprecated, input file auto generated with BBFDM_INSTALL_MS_DM #)
-	$(INSTALL_DIR) $(1)/etc/bbfdm/micro_services
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/micro_services/$(PKG_NAME).json
-endef
-
-define BbfdmInstallPlugin
-	$(warning # function BbfdmInstallPlugin deprecated, use BBFDM_INSTALL_CORE_PLUGIN macro #)
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/plugins/
-endef
-
-define BbfdmInstallPluginWithPriority
-	$(warning # fucntion BbfdmInstallPluginWithPriority deprecated, use BBFDM_INSTALL_CORE_PLUGIN #)
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(3) $(1)/etc/bbfdm/plugins/$(2)_$(shell basename ${3})
-endef

bbfdm/files/etc/bbfdm/input.json

@@ -1,28 +0,0 @@
-{
-        "daemon": {
-                "config": {
-                },
-                "input": {
-                        "type": "DotSo",
-                        "name": "/usr/share/bbfdm/libbbfdm.so",
-                        "plugin_dir": "/usr/share/bbfdm/plugins"
-                },
-                "output": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                }
-        },
-        "cli": {
-                "config": {
-                        "proto": "both",
-                        "instance_mode": 0
-                },
-                "input": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                },
-                "output": {
-                        "type": "CLI"
-                }
-        }
-}

bbfdm/files/etc/config/bbfdm

@@ -1,11 +0,0 @@
-config bbfdmd 'bbfdmd'
-	option enable '1'
-	option loglevel '1'
-	option refresh_time '120'
-	option transaction_timeout '30'
-	option subprocess_level '2'
-
-config micro_services 'micro_services'
-	option enable '1'
-	option enable_core '0'
-	option enable_respawn '1'

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbf_configd

@@ -1,15 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=64
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbf_configd
-
-start_service()
-{
-	procd_open_instance "bbf_configd"
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance "bbf_configd"
-}

bbfdm/files/etc/init.d/bbfdm.services

@@ -1,106 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=40
-STOP=8
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_MICROSERVICE_DIR="/etc/bbfdm/micro_services"
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.services -p info
-}
-
-validate_bbfdm_micro_service_section()
-{
-	uci_validate_section bbfdm micro_services "micro_services" \
-		'enable:bool:true' \
-		'enable_core:bool:false' \
-		'enable_respawn:bool:true'
-}
-
-_add_microservice()
-{
-	local name path
-	local enable enable_core enable_respawn
-
-	# Check enable from micro-service
-	path="${1}"
-	enable_respawn="${2}"
-	enable_core="${3}"
-
-	name="$(basename ${path})"
-	name="${name//.json}"
-
-	enable="$(jq -r '.daemon.enable//1' ${path})"
-	if [ "${enable}" -eq "0" ]; then
-		log "datamodel micro-service ${name} not enabled"
-		return 0
-	fi
-
-	procd_open_instance "${name}"
-
-	procd_set_param command ${PROG}
-	procd_append_param command -m "${name}"
-
-	if [ "${enable_core}" -eq "1" ]; then
-		procd_set_param limits core="unlimited"
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ "${enable_respawn}" -eq "1" ]; then
-		procd_set_param respawn "3600" "5" "5"
-	fi
-	procd_close_instance "${name}"
-}
-
-configure_bbfdm_micro_services()
-{
-	local enable enable_core enable_respawn
-
-	config_load bbfdm
-	validate_bbfdm_micro_service_section || {
-		log "Validation of micro_service section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq "0" ] && return 0
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		FILES="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/*.json)"
-
-		for file in $FILES;
-		do
-			[ -e "$file" ] || continue
-
-			_add_microservice $file "${enable_respawn}" "${enable_core}"
-		done
-	fi
-}
-
-_start_single_service()
-{
-	local service file
-
-	service="${1}"
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		file="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/${service}.json)"
-		[ -e "$file" ] || return
-
-		_add_microservice $file "0" "0"
-	fi
-}
-
-start_service()
-{
-	if [ -n "${1}" ]; then
-		_start_single_service "${1}"
-	else
-		configure_bbfdm_micro_services
-	fi
-}

bbfdm/files/etc/init.d/bbfdmd

@@ -1,71 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-BBFDM_TEMP_DIR="/tmp/bbfdm"
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enable:bool:true' \
-		'sock:string' \
-		'debug:bool:false' \
-		'loglevel:uinteger:1' \
-		'refresh_time:uinteger:0' \
-		'transaction_timeout:uinteger:30' \
-		'subprocess_level:uinteger'
-}
-
-configure_bbfdmd()
-{
-	local enable debug sock
-	local jlog jrefresh jtimeout jlevel
-
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq 0 ] && return 0
-
-	if [ -f "${BBFDM_JSON_INPUT}" ]; then
-		echo "$(jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} --arg level ${subprocess_level} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran, "subprocess_level": $level}' ${BBFDM_JSON_INPUT})" > "${BBFDM_TEMP_DIR}/input.json"
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	mkdir -p ${BBFDM_TEMP_DIR}
-
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/uci-defaults/91-fix-bbfdmd-enabled-option

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# rename bbfdmd enabled option to enable
-val="$(uci -q get bbfdm.bbfdmd.enabled)"
-if [ -n "${val}" ]; then
-	uci -q set bbfdm.bbfdmd.enabled=""
-	uci -q set bbfdm.bbfdmd.enable="${val}"
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-
-	# Apply the changes
-	uci commit network
-	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/tools/bbfdm.sh

@@ -1,169 +0,0 @@
-#!/bin/bash
-
-BBFDM_BASE_DM_PATH="usr/share/bbfdm"
-BBFDM_INPUT_PATH="etc/bbfdm/micro_services"
-INPUT_TEMPLATE='{"daemon":{"enable":"1","service_name":"template","config":{"loglevel":"1"}}}'
-OUT_NAME=""
-
-MICRO_SERVICE=0
-SCRIPT=0
-DIAG=0
-PLUGIN=0
-DEST=""
-TOOLS="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
-SRC=""
-
-while getopts ":mpsdu:" opt; do
-	case ${opt} in
-	  m)
-	  	MICRO_SERVICE=1
-		;;
-	  p)
-	  	PLUGIN=1
-		;;
-	  s)
-	  	SCRIPT=1
-		;;
-	  d)
-	  	DIAG=1
-		;;
-	  u)
-	  	OUT_NAME="${OPTARG}"
-		;;
-	  ?)
-	  	echo "Invalid option: ${OPTARG}"
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-SRC="${1}"
-shift
-DEST="${1}"
-shift
-DATA="${1}"
-
-install_bin() {
-	if ! install -m0755 ${1} ${2}; then
-		echo "Failed to install bin ${1} => ${2}"
-		exit 1
-	fi
-}
-
-install_dir() {
-	if ! install -d -m0755 ${1}; then
-		echo "Failed to create directory ${1}"
-		exit 1
-	fi
-}
-
-install_data() {
-	if ! install -m0644 ${1} ${2}; then
-		echo "Failed to install ${1} => ${2}"
-		exit 1
-	fi
-}
-
-# Installing datamodel
-bbfdm_install_dm()
-{
-	local src dest minfile
-
-	src="$1"
-	dest="$2"
-	minfile=""
-
-	if [ -z ${src} ] || [ -z "${dest}" ] || [ -z "${TOOLS}" ]; then
-		echo "Invalid input option for install dm $@"
-		exit 1
-	fi
-
-	if [ "${src##*.}" = "json" ]; then
-		echo "Compacting BBFDM JSON file"
-		minfile=$(mktemp)
-		jq -c 'del(..|.description?)' ${src} > ${minfile}
-
-		src=${minfile}
-		if dpkg -s python3-jsonschema >/dev/null 2>&1; then
-			echo "Verifying bbfdm Datamodel JSON file"
-			if ! ${TOOLS}/validate_plugins.py ${src}; then
-				echo "Validation of the plugin failed ${src}"
-				exit 1
-			fi
-		else
-			echo "## Install python3-jsonschema to verify datamodel plugins"
-		fi
-	fi
-
-	install_bin ${src} ${dest}
-
-	if [ -f "${minfile}" ]; then
-		rm ${minfile}
-	fi
-}
-
-bbfdm_generate_input()
-{
-	local dest ser
-
-	dest_dir=${1}
-	ser=${2}
-	dest=${dest_dir}/${ser}.json
-
-	if [ -n "${OUT_NAME}" ]; then
-		echo ${INPUT_TEMPLATE} | jq --arg service "${ser}" --arg OUT "${OUT_NAME}" '.daemon |= (.service_name = $service |.output.name = $OUT)' > ${dest}
-	else
-		echo ${INPUT_TEMPLATE} | jq --arg service "${ser}" '.daemon.service_name = $service' > ${dest}
-	fi
-
-	chmod 466 ${dest}
-}
-
-if [ -z "$SRC" ] || [ -z "${DEST}" ] ; then
-	echo "# BBFDM Null value in src[${SRC}], dest[${DEST}]"
-	exit 1
-fi
-
-if [ "${SCRIPT}" -eq "1" ]; then
-	if [ "${DIAG}" -eq "1" ]; then
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag/
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/
-	fi
-	exit 0
-fi
-
-if [ "${MICRO_SERVICE}" -eq "1" ]; then
-	if [ -z "${DATA}" ]; then
-		echo "# service_name[${DATA}] not provided"
-		exit 1
-	fi
-
-	if [ "${PLUGIN}" -ne "1" ]; then
-		extn="$(basename ${SRC})"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}.${extn##*.}
-
-		# main micro-service datamodel plugin, create an input file as well
-		install_dir ${DEST}/${BBFDM_INPUT_PATH}
-		bbfdm_generate_input ${DEST}/${BBFDM_INPUT_PATH}/ ${DATA}
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}/$(basename ${SRC})
-	fi
-else
-	if [ "${PLUGIN}" -eq "1" ]; then
-		priority="${DATA:-0}"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/plugins
-		if [ "${priority}" -gt "0" ]; then
-			# install with priority if defined
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/plugins/${priority}_$(basename ${SRC})
-		else
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/plugins/$(basename ${SRC})
-		fi
-	fi
-fi
-

bbfdm/tools/validate_plugins.py

@@ -1,330 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright (C) 2024 iopsys Software Solutions AB
-# Author: Amin Ben Romdhane <amin.benromdhane@iopsys.eu>
-
-import sys
-import json
-from jsonschema import validate
-
-JSON_PLUGIN_VERSION = 0
-
-obj_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-				"uci" : {"type" : "object", "properties" : {
-						"file" : {"type": "string"},
-						"section" : {"type": "object", "properties" : {
-								"type" : {"type": "string"}
-							}
-						},
-						"dmmapfile" : {"type": "string"}
-					}
-				},
-				"ubus" : {"type" : "object", "properties" : {
-						"object" : {"type": "string"},
-						"method" : {"type": "string"},
-						"args" : {"type": "object"},
-						"key" : {"type": "string"}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-obj_schema_v1 = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {
-			"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"}
-								}
-							},
-							"dmmapfile" : {"type": "string"}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-param_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"string",
-				"unsignedInt",
-				"unsignedLong",
-				"int",
-				"long",
-				"boolean",
-				"dateTime",
-				"hexBinary",
-				"base64",
-				"decimal"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus",
-				"procfs",
-				"sysfs",
-				"json",
-				"uci_sec"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"read" : {"type" : "boolean"},
-		"write" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {"type": "object", "properties" : {
-					"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"},
-									"index" : {"type": "string"}
-								}
-							},
-							"option" : {"type": "object", "properties" : {
-									"name" : {"type": "string"}								}
-							}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					},
-					"procfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					},
-					"sysfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"read",
-		"write"
-	]
-}
-
-event_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"event"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}}
-	},
-	"required": [
-		"type",
-		"protocols"
-	]
-}
-
-command_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"command"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"async" : {"type" : "boolean"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"input" : {"type" : "object"},
-		"output" : {"type" : "object"}
-	},
-	"required": [
-		"type",
-		"async",
-		"protocols"
-	]
-}
-
-def print_validate_json_usage():
-    print("Usage: " + sys.argv[0] + " <dm json file>")
-    print("Examples:")
-    print("  - " + sys.argv[0] + " datamodel.json")
-    print("    ==> Validate the json file")
-    print("")
-    exit(1)
-
-def parse_value( key , value ):
-
-    if key.endswith('.') and not key.startswith('Device.'):
-        print(key + " is not a valid path")
-        exit(1)
-
-    if key.endswith('.') and (JSON_PLUGIN_VERSION == 1 or JSON_PLUGIN_VERSION == 2):
-        __schema = obj_schema_v1
-    elif key.endswith('.'):
-        __schema = obj_schema
-    elif key.endswith('!'):
-        __schema = event_schema
-    elif key.endswith('()'):
-        __schema = command_schema
-    else:
-        __schema = param_schema
-    
-    validate(instance = value, schema = __schema)
-    
-    for k, v in value.items():
-        if k != "list" and k != "mapping" and k != "input" and k != "output" and isinstance(v, dict):
-            parse_value(k, v)
-
-### main ###
-if len(sys.argv) < 2:
-    print_validate_json_usage()
-    
-json_file = open(sys.argv[1], "r", encoding='utf-8')
-try:
-    json_data = json.loads(json_file.read())
-except ValueError:
-    print(sys.argv[1] + " file has a wrong JSON format!!!!!")
-    exit(1)
-
-for __key, __value in json_data.items():
-
-    if __key == "json_plugin_version":
-
-        if not isinstance(__value, int) or __value not in [0, 1, 2]:
-            raise ValueError("Invalid value for json_plugin_version")
-
-        JSON_PLUGIN_VERSION = __value
-        continue
-
-    parse_value(__key , __value)
-
-print("JSON File is Valid")

bridgemngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_bridgemngr
-
-menu "Configuration"
-
-config BRIDGEMNGR_BRIDGE_VLAN
-	bool "Use bridge-vlan backend"
-	help
-	   Set this option to use bridge-vlan as backend for VLAN objects.
-
-endmenu
-endif

bridgemngr/Makefile

@@ -1,61 +0,0 @@
-#
-# Copyright (C) 2020-2024 iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bridgemngr
-PKG_VERSION:=1.0.5
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
-PKG_SOURCE_VERSION:=c0f2e17f6d4f96aecfe72ab90be885939413176d
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-define Package/bridgemngr
- CATEGORY:=Utilities
- TITLE:=Bridge Manager
- DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api
-endef
-
-define Package/bridgemngr/description
-	Package to add Device.Bridging. data model support.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
-
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VLAN),y)
-	TARGET_CFLAGS += -DBRIDGE_VLAN_BACKEND
-endif
-
-define Package/bridgemngr/install
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libbridgemngr.so $(1) $(PKG_NAME)
-ifeq ($(findstring iopsys,$(CONFIG_BBF_VENDOR_LIST)),iopsys)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/src/libbridgeext.so $(1) $(PKG_NAME)
-endif
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) ~/git/bridgemngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,bridgemngr))

bulkdata/Makefile

@@ -1,35 +1,40 @@
 #
 # Copyright (C) 2022 iopsys Software Solutions AB
 #
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.11
+PKG_VERSION:=2.0.3.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=5dd9cd3cfc95e9dce5f64fe9cadd274bb31b8fa6
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+PKG_SOURCE_VERSION:=33a6648de9ee0af33c44518656b56b0a30b6c1ab
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 
 define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
@@ -44,14 +49,10 @@ endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/config/bulkdata $(1)/etc/config/
-	$(INSTALL_BIN) ./files/etc/init.d/bulkdatad $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/95-bulkdata-translation-options $(1)/etc/uci-defaults/
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json $(1) $(PKG_NAME)
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/bulkdata/usr/share/bbfdm/micro_services/bulkdata.json

@@ -1,960 +0,0 @@
-{
-	"json_plugin_version": 2,
-	"Device.BulkData.": {
-		"type": "object",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Enable": {
-			"type": "boolean",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"datatype": "boolean",
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "bulkdata",
-						"section": {
-							"name": "bulkdata"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		},
-		"Status": {
-			"type": "string",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"datatype": "string",
-			"enumerations": [
-				"Enabled",
-				"Disabled",
-				"Error"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "bulkdata",
-						"section": {
-							"name": "bulkdata"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		},
-		"MinReportingInterval": {
-			"type": "unsignedInt",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "0",
-			"datatype": "unsignedInt",
-			"unit": "seconds"
-		},
-		"Protocols": {
-			"type": "string",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "HTTP",
-			"list": {
-				"datatype": "string",
-				"enumerations": [
-					"Streaming",
-					"File",
-					"HTTP",
-					"MQTT"
-				]
-			}
-		},
-		"EncodingTypes": {
-			"type": "string",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "JSON,CSV",
-			"list": {
-				"datatype": "string",
-				"enumerations": [
-					"XML",
-					"XDR",
-					"CSV",
-					"JSON"
-				]
-			}
-		},
-		"ParameterWildCardSupported": {
-			"type": "boolean",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "1",
-			"datatype": "boolean"
-		},
-		"MaxNumberOfProfiles": {
-			"type": "int",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "-1",
-			"datatype": "int",
-			"range": [
-				{
-					"min": -1
-				}
-			]
-		},
-		"MaxNumberOfParameterReferences": {
-			"type": "int",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"default": "-1",
-			"datatype": "int",
-			"range": [
-				{
-					"min": -1
-				}
-			]
-		},
-		"ProfileNumberOfEntries": {
-			"type": "unsignedInt",
-			"read": true,
-			"write": false,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"datatype": "unsignedInt",
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "bulkdata",
-						"section": {
-							"type": "profile"
-						},
-						"option": {
-							"name": "@Count"
-						}
-					}
-				}
-			]
-		},
-		"Device.BulkData.Profile.{i}.": {
-			"type": "object",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": true,
-			"array": true,
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "bulkdata",
-						"section": {
-							"type": "profile"
-						},
-						"dmmapfile": "dmmap_bulkdata"
-					}
-				}
-			],
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "boolean",
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "enable"
-					}
-				]
-			},
-			"Alias": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "Alias",
-				"range": [
-					{
-						"max": 64
-					}
-				],
-				"flags": [
-					"Unique"
-				],
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "alias"
-					}
-				]
-			},
-			"Name": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "string",
-				"range": [
-					{
-						"max": 255
-					}
-				],
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "name"
-					}
-				]
-			},
-			"NumberOfRetainedFailedReports": {
-				"type": "int",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "int",
-				"range": [
-					{
-						"min": -1
-					}
-				],
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "nbre_of_retained_failed_reports"
-					}
-				]
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "string",
-				"enumerations": [
-					"Streaming",
-					"File",
-					"HTTP"
-				],
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "protocol"
-					}
-				]
-			},
-			"EncodingType": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "string",
-				"enumerations": [
-					"XML",
-					"XDR",
-					"CSV",
-					"JSON"
-				],
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "encoding_type"
-					}
-				]
-			},
-			"ReportingInterval": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "unsignedInt",
-				"range": [
-					{
-						"min": 1
-					}
-				],
-				"unit": "seconds",
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "reporting_interval"
-					}
-				]
-			},
-			"TimeReference": {
-				"type": "dateTime",
-				"read": true,
-				"write": true,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "dateTime",
-				"mapping": [
-					{
-						"data": "@Parent",
-						"type": "uci_sec",
-						"key": "time_reference"
-					}
-				]
-			},
-			"ParameterNumberOfEntries": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": false,
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"datatype": "unsignedInt",
-				"mapping": [
-					{
-						"type": "uci",
-						"uci": {
-							"file": "bulkdata",
-							"section": {
-								"type": "profile_parameter"
-							},
-							"option": {
-								"name": "@Count"
-							}
-						}
-					}
-				]
-			},
-			"Device.BulkData.Profile.{i}.Parameter.{i}.": {
-				"type": "object",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"access": true,
-				"array": true,
-				"mapping": [
-					{
-						"type": "uci",
-						"uci": {
-							"file": "bulkdata",
-							"section": {
-								"type": "profile_parameter"
-							},
-							"dmmapfile": "dmmap_bulkdata"
-						}
-					}
-				],
-				"Name": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"range": [
-						{
-							"max": 64
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "name"
-						}
-					]
-				},
-				"Reference": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"range": [
-						{
-							"max": 256
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "reference"
-						}
-					]
-				}
-			},
-			"Device.BulkData.Profile.{i}.CSVEncoding.": {
-				"type": "object",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"access": false,
-				"array": false,
-				"FieldSeparator": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "csv_encoding_field_separator"
-						}
-					]
-				},
-				"RowSeparator": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "csv_encoding_row_separator"
-						}
-					]
-				},
-				"EscapeCharacter": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "csv_encoding_escape_character"
-						}
-					]
-				},
-				"ReportFormat": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"ParameterPerRow",
-						"ParameterPerColumn"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "csv_encoding_report_format"
-						}
-					]
-				},
-				"RowTimestamp": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"Unix-Epoch",
-						"ISO-8601",
-						"None"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "csv_encoding_row_time_stamp"
-						}
-					]
-				}
-			},
-			"Device.BulkData.Profile.{i}.JSONEncoding.": {
-				"type": "object",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"access": false,
-				"array": false,
-				"ReportFormat": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"ObjectHierarchy",
-						"NameValuePair"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "json_encoding_report_format"
-						}
-					]
-				},
-				"ReportTimestamp": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"Unix-Epoch",
-						"ISO-8601",
-						"None"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "json_encoding_report_time_stamp"
-						}
-					]
-				}
-			},
-			"Device.BulkData.Profile.{i}.HTTP.": {
-				"type": "object",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"access": false,
-				"array": false,
-				"URL": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "URL",
-					"range": [
-						{
-							"max": 2048
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_url"
-						}
-					]
-				},
-				"Username": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"range": [
-						{
-							"max": 256
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_username"
-						}
-					]
-				},
-				"Password": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"range": [
-						{
-							"max": 256
-						}
-					],
-					"flags": [
-						"Secure"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_password"
-						}
-					]
-				},
-				"CompressionsSupported": {
-					"type": "string",
-					"read": true,
-					"write": false,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"default": "GZIP",
-					"list": {
-						"datatype": "string",
-						"enumerations": [
-							"GZIP",
-							"Compress",
-							"Deflate"
-						]
-					}
-				},
-				"Compression": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"GZIP",
-						"Compress",
-						"Deflate"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_compression"
-						}
-					]
-				},
-				"MethodsSupported": {
-					"type": "string",
-					"read": true,
-					"write": false,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"default": "POST,PUT",
-					"list": {
-						"datatype": "string",
-						"enumerations": [
-							"POST",
-							"PUT"
-						]
-					}
-				},
-				"Method": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "string",
-					"enumerations": [
-						"POST",
-						"PUT"
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_method"
-						}
-					]
-				},
-				"UseDateHeader": {
-					"type": "boolean",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "boolean",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_use_date_header"
-						}
-					]
-				},
-				"RetryEnable": {
-					"type": "boolean",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "boolean",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_retry_enable"
-						}
-					]
-				},
-				"RetryMinimumWaitInterval": {
-					"type": "unsignedInt",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "unsignedInt",
-					"range": [
-						{
-							"min": 1,
-							"max": 65535
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_retry_minimum_wait_interval"
-						}
-					]
-				},
-				"RetryIntervalMultiplier": {
-					"type": "unsignedInt",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "unsignedInt",
-					"range": [
-						{
-							"min": 1000,
-							"max": 65535
-						}
-					],
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_retry_interval_multiplier"
-						}
-					]
-				},
-				"RequestURIParameterNumberOfEntries": {
-					"type": "unsignedInt",
-					"read": true,
-					"write": false,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "unsignedInt",
-					"mapping": [
-						{
-							"type": "uci",
-							"uci": {
-								"file": "bulkdata",
-								"section": {
-									"type": "profile_http_request_uri_parameter"
-								},
-								"option": {
-									"name": "@Count"
-								}
-							}
-						}
-					]
-				},
-				"PersistAcrossReboot": {
-					"type": "boolean",
-					"read": true,
-					"write": true,
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"datatype": "boolean",
-					"mapping": [
-						{
-							"data": "@Parent",
-							"type": "uci_sec",
-							"key": "http_persist_across_reboot"
-						}
-					]					
-				},
-				"Device.BulkData.Profile.{i}.HTTP.RequestURIParameter.{i}.": {
-					"type": "object",
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"access": true,
-					"array": true,
-					"mapping": [
-						{
-							"type": "uci",
-							"uci": {
-								"file": "bulkdata",
-								"section": {
-									"type": "profile_http_request_uri_parameter"
-								},
-								"dmmapfile": "dmmap_bulkdata"
-							}
-						}
-					],
-					"Name": {
-						"type": "string",
-						"read": true,
-						"write": true,
-						"protocols": [
-							"cwmp",
-							"usp"
-						],
-						"datatype": "string",
-						"range": [
-							{
-								"max": 64
-							}
-						],
-						"mapping": [
-							{
-								"data": "@Parent",
-								"type": "uci_sec",
-								"key": "name"
-							}
-						]
-					},
-					"Reference": {
-						"type": "string",
-						"read": true,
-						"write": true,
-						"protocols": [
-							"cwmp",
-							"usp"
-						],
-						"datatype": "string",
-						"range": [
-							{
-								"max": 256
-							}
-						],
-						"mapping": [
-							{
-								"data": "@Parent",
-								"type": "uci_sec",
-								"key": "reference"
-							}
-						]
-					}
-				}
-			}
-		}
-	}
-}

bulkdata/files/etc/init.d/bulkdatad

@@ -1,32 +1,26 @@
 #!/bin/sh /etc/rc.common
 
-START=60
+START=99
 STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
 
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
+	[ "$enable" != "1" ] && {
+		return 0
+	}
 
-	if [ ! -f "/var/state/bulkdatad" ]; then
-		touch /var/state/bulkdatad
-		uci -q -c /var/state set bulkdatad.global='global'
-		uci -q -c /var/state commit bulkdatad
-	fi
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn "3" "7" "0"
+	procd_close_instance
+}
 
-	if [ "$enable" -eq "1" ]; then
-		procd_open_instance "bulkdata"
-		procd_set_param command "$PROG"
-		procd_set_param respawn
-		procd_close_instance "bulkdata"
-	else
-		uci -q -c /var/state set bulkdatad.global.status='Disabled'
-		uci -q -c /var/state commit bulkdatad
-	fi
+boot() {
+	start
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -16,8 +16,8 @@ get_next_count()
 	fi
 
 	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
 			count=$((count + 1))
 		else
 			found=1;
@@ -39,8 +39,8 @@ translate_profile_id_to_profile_name() {
 	
 	[ "${curr_profile_id}" != "${profile_id}" ] && return
 
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
 }
 
 update_profile_sections() {
@@ -54,7 +54,7 @@ update_profile_sections() {
 
 	case "${section}" in
 		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
 			uci_rename bulkdata "${section}" "${profile_name}"
 		;;
 	esac
@@ -62,7 +62,7 @@ update_profile_sections() {
 
 	[ -n "$profile_name" ] && section="${profile_name}"
 
-	uci -q set bulkdata."${section}".profile_id=""
+	uci -q set bulkdata.${section}.profile_id=""
 
 	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
 	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

csmngr/Makefile

@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=csmngr
-PKG_VERSION:=1.0.2
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5e50fe388fff29b08d895c1c580152cccfa290ad
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/csmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_CONFIG_DEPENDS := \
-		     CONFIG_PACKAGE_libwifiutils \
-		     CONFIG_PACKAGE_libwifi
-
-PKG_BUILD_DEPENDS := libwifi
-
-include $(INCLUDE_DIR)/package.mk
-
-
-MAKE_PATH:=src
-
-define Package/csmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi channel selection manager
-  DEPENDS:=+libwifiutils +libwifi +libuci +libubox +ubus +libnl-genl
-endef
-
-define Package/csmngr/description
- WiFi Auto Channel Selection manager.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/csmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/csmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/csmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,csmngr))

ddnsmngr/Config.in

@@ -1,16 +0,0 @@
-if PACKAGE_ddnsmngr
-choice
-	prompt "Select backend for dynamic DNS management"
-	default DDNSMNGR_BACKEND_DDNSSCRIPT
-	depends on PACKAGE_ddnsmngr
-	help
-		Select which package to use for dynamic DNS support
-
-config DDNSMNGR_BACKEND_DDNSSCRIPT
-	bool "Use ddns_script"
-
-config DDNSMNGR_BACKEND_INADYN
-	bool "Use inadyn"
-
-endchoice
-endif

ddnsmngr/Makefile

@@ -1,77 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.7
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=4b0c679c4dc3e3725de5c0c55ed60f24b87c6edd
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-PKG_CONFIG_DEPENDS:=CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT CONFIG_DDNSMNGR_BACKEND_INADYN
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Dynamic DNS manager
-  DEPENDS:=+libbbfdm-api +DDNSMNGR_BACKEND_DDNSSCRIPT:ddns-scripts +DDNSMNGR_BACKEND_INADYN:inadyn
-  MENU:=1
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-define Package/$(PKG_NAME)/description
-	Manage dynamic DNS updation and provides Device.DynamicDNS. datamodel object based on TR181-2.16
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/ddnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/ddns
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/servers
-	$(INSTALL_DIR) $(1)/usr/lib/ddnsmngr
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DATA) ./files/etc/config/ddnsmngr $(1)/etc/config/ddnsmngr
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-ddns-config-migrate $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/init.d/ddnsmngr $(1)/etc/init.d/ddnsmngr
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT),y)
-	$(INSTALL_BIN) ./files/usr/lib/ddns_script/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/lib/ddnsmngr/ddnsmngr_updater.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/ddns-script/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_INADYN),y)
-	$(INSTALL_BIN) ./files/usr/lib/inadyn/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/inadyn/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/inadyn/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libddnsmngr.so $(1) $(PKG_NAME)
-endef
-
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

ddnsmngr/files/etc/config/ddnsmngr

@@ -1,23 +0,0 @@
-config ddnsmngr 'global'
-	option configfile '/var/run/ddnsmngr/ddnsmngr.json'
-	option ddns_dateformat '%F %R'
-	option ddns_rundir '/var/run/ddnsmngr'
-	option ddns_logdir '/var/log/ddnsmngr'
-	option ddns_loglines '250'
-	option upd_privateip '0'
-	option use_curl '1'
-
-config server 'ddns_server_1'
-	option enabled '1'
-	option service 'dynu.com'
-	option name 'dynu.com'
-
-config server 'ddns_server_2'
-	option enabled '1'
-	option service 'dyndns.org'
-	option name 'dyndns.org'
-
-config server 'ddns_server_3'
-	option enabled '1'
-	option service 'zoneedit.com'
-	option name 'zoneedit.com'

ddnsmngr/files/etc/init.d/ddnsmngr

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=10
-USE_PROCD=1
-
-. /usr/lib/ddnsmngr/ddnsmngr_service.sh
-
-start_service() {
-	start_ddnsmngr_service
-}
-
-stop_service() {
-	stop_ddnsmngr_service
-}
-
-reload_service() {
-	stop
-	sleep 1
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger ddnsmngr
-	add_ddnsmngr_triggers
-}

ddnsmngr/files/etc/uci-defaults/01-ddns-config-migrate

@@ -1,170 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-cl_id=1
-srv_id=1
-
-function get_ddns_config_option() {
-	local val
-
-	val="$(uci -q get ddns.${1}.${2})"
-
-	if [ -z "${val}" ] && [ -n "${3}" ]; then
-		val="${3}"
-	fi
-
-	echo "${val}"
-}
-
-function config_supported_service() {
-	if ! uci -q get ddnsmngr.global >/dev/null 2>&1; then
-		uci -q set ddnsmngr.global="ddnsmngr"
-	fi
-
-	servers=""
-
-	for i in $(find /etc/ddnsmngr/servers/ -name '*.json' | cut -d'/' -f 5 | sed "s/.json//")
-	do
-		if [ -z "${servers}" ]; then
-			servers="${i}"
-		else
-			servers="${servers},${i}"
-		fi
-	done
-
-	uci -q set ddnsmngr.global.supported_services="${servers}"
-}
-
-function migrate_service_section() {
-	client_sec=""
-	enabled="$(get_ddns_config_option ${1} enabled "0")"
-	service_name="$(get_ddns_config_option ${1} service_name)"
-	interface="$(get_ddns_config_option ${1} interface)"
-	ip_network="$(get_ddns_config_option ${1} ip_network)"
-	username="$(get_ddns_config_option ${1} username)"
-	password="$(get_ddns_config_option ${1} password)"
-	lookup_host="$(get_ddns_config_option ${1} lookup_host)"
-	use_ipv6="$(get_ddns_config_option ${1} use_ipv6 "0")"
-	force_ipversion="$(get_ddns_config_option ${1} force_ipversion "0")"
-	use_https="$(get_ddns_config_option ${1} use_https "0")"
-	force_dnstcp="$(get_ddns_config_option ${1} force_dnstcp "0")"
-
-	if [ -z "${service_name}" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# check server file is present in device
-	if [ ! -f "/etc/ddnsmngr/servers/${service_name}.json" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# Check if client section is already added for this service
-	clients=$(uci -q show ddnsmngr | grep "=client")
-	client_count=$(echo "${clients}" | wc -l)
-
-	tmp=0
-	while [ $tmp -lt $client_count ]
-	do
-		mngr_serv="$(uci -q get ddnsmngr.@client[$tmp].service_name)"
-		mngr_intf="$(uci -q get ddnsmngr.@client[$tmp].interface)"
-		mngr_netw="$(uci -q get ddnsmngr.@client[$tmp].ip_network)"
-		mngr_user="$(uci -q get ddnsmngr.@client[$tmp].username)"
-		mngr_ipv6="$(uci -q get ddnsmngr.@client[$tmp].use_ipv6)"
-		mngr_forceip="$(uci -q get ddnsmngr.@client[$tmp].force_ipversion)"
-		mngr_https="$(uci -q get ddnsmngr.@client[$tmp].use_https)"
-		mngr_dnstcp="$(uci -q get ddnsmngr.@client[$tmp].force_dnstcp)"
-
-		[ -z "${mngr_ipv6}" ] && mngr_ipv6="0"
-		[ -z "${mngr_forceip}" ] && mngr_forceip="0"
-		[ -z "${mngr_https}" ] && mngr_https="0"
-		[ -z "${mngr_dnstcp}" ] && mngr_dnstcp="0"
-
-		if [ "${mngr_serv}" == "${service_name}" ] && [ "${mngr_intf}" == "${interface}" ] && \
-		   [ "${mngr_netw}" == "${ip_network}" ] && [ "${mngr_user}" == "${username}" ] && \
-		   [ "${mngr_ipv6}" == "${use_ipv6}" ] && [ "${mngr_forceip}" == "${force_ipversion}" ] && \
-		   [ "${mngr_https}" == "${use_https}" ] && [ "${mngr_dnstcp}" == "${force_dnstcp}" ]; then
-			break
-		fi
-
-		tmp=$(( tmp + 1 ))
-	done
-
-	if [ $tmp -ne $client_count ]; then
-		i=0
-		for client in $clients; do
-			if [ $i -eq $tmp ]; then
-				client_sec="$(echo $client | cut -d'=' -f 1 | cut -d'.' -f 2)"
-				break
-			fi
-			i=$(( i + 1 ))
-		done
-
-		if [ $enabled -eq 1 ]; then
-			uci -q set ddnsmngr."${client_sec}".enabled="1"
-		fi
-	else
-		client_sec=ddns_mig_client_"${cl_id}"
-
-		uci -q set ddnsmngr."${client_sec}"="client"
-		uci -q set ddnsmngr."${client_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${client_sec}".service_name="${service_name}"
-		uci -q set ddnsmngr."${client_sec}".interface="${interface}"
-		uci -q set ddnsmngr."${client_sec}".ip_network="${ip_network}"
-		uci -q set ddnsmngr."${client_sec}".username="${username}"
-		uci -q set ddnsmngr."${client_sec}".password="${password}"
-		uci -q set ddnsmngr."${client_sec}".use_ipv6="${use_ipv6}"
-		uci -q set ddnsmngr."${client_sec}".force_ipversion="${force_ipversion}"
-		uci -q set ddnsmngr."${client_sec}".use_https="${use_https}"
-		uci -q set ddnsmngr."${client_sec}".force_dnstcp="${force_dnstcp}"
-
-		cl_id=$(( cl_id + 1 ))
-
-		# add server section if not added
-		servers=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'")
-		if [ -z "${servers}" ]; then
-			server_sec=ddns_mig_server_"${srv_id}"
-			uci -q set ddnsmngr."${server_sec}"="server"
-			uci -q set ddnsmngr."${server_sec}".enabled="1"
-			uci -q set ddnsmngr."${server_sec}".service="${service_name}"
-			uci -q set ddnsmngr."${server_sec}".name="${service_name}"
-
-			srv_id=$(( srv_id + 1 ))
-		fi
-	fi
-
-
-	# if lookup_host is set then add host section
-	if [ -n "${lookup_host}" ] && [ -n "${client_sec}" ]; then
-		# check number of hosts present for this client
-		host_count=$(uci -q show ddnsmngr | grep "dm_parent=\'${client_sec}\'" | wc -l)
-		host_ix=$(( host_count + 1 ))
-		host_sec="${client_sec}"_host_"${host_ix}"
-
-		uci -q set ddnsmngr."${host_sec}"="host"
-		uci -q set ddnsmngr."${host_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${host_sec}".lookup_host="${lookup_host}"
-		uci -q set ddnsmngr."${host_sec}".dm_parent="${client_sec}"
-	fi
-
-	uci -q delete ddns."${1}"
-}
-
-function migrate_ddns_config() {
-	if [ ! -f "/etc/config/ddnsmngr" ]; then
-		# Create ddnsmngr config file
-		touch /etc/config/ddnsmngr
-	fi
-
-	config_supported_service
-
-	config_load ddns
-	config_foreach migrate_service_section service
-
-	uci -q commit ddns
-	uci -q commit ddnsmngr
-}
-
-migrate_ddns_config

ddnsmngr/files/usr/lib/ddns_script/ddnsmngr_service.sh

@@ -1,169 +0,0 @@
-#! /bin/sh
-
-RUNDIR="/var/run/ddnsmngr"
-LOGDIR="/var/log/ddnsmngr"
-PROG="/usr/lib/ddnsmngr/ddnsmngr_updater.sh"
-CONFIGFILE="/var/run/ddnsmngr/ddnsmngr.json"
-CLIENT_INTFS=""
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion proc_info_file
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return 0
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return 0
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return 0 
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return 0
-	fi
-
-	service_section=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return 0
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	json_add_object
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "proc_info_file" "${1}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_close_object
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return 0
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	run_dir=$(uci -q get ddnsmngr.global.ddns_rundir)
-	log_dir=$(uci -q get ddnsmngr.global.ddns_logdir)
-
-	if [ -n "${run_dir}" ]; then
-		RUNDIR="${run_dir}"
-	fi
-
-	if [ -n "${log_dir}" ]; then
-		LOGDIR="${log_dir}"
-	fi
-
-	mkdir -p "${RUNDIR}"
-	mkdir -p "${LOGDIR}"
-
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	touch "${CONFIGFILE}"
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "Can not create ${CONFIGFILE}, exit"
-		exit 0
-	fi
-
-	json_init
-	json_add_array "services"
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	json_close_array
-	json_dump > "${CONFIGFILE}"
-
-	procd_open_instance ddnsmngr
-	procd_set_param command "$PROG"
-	procd_append_param command -c "${CONFIGFILE}"
-	procd_append_param command -- start
-	procd_close_instance
-}
-
-stop_ddnsmngr_service() {
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "${CONFIGFILE} not found, can't stop services if running any"
-	fi
-
-	"$PROG" -c "${CONFIGFILE}" -- stop
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-		procd_add_interface_trigger "interface.*.down" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

ddnsmngr/files/usr/lib/inadyn/ddnsmngr_service.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-PROG="/usr/sbin/inadyn"
-CONFIGPATH="/tmp/inadyn_config"
-PIDPATH="/etc/inadyn_pid"
-CLIENT_INTFS=""
-CONFIG_FILES=""
-SERVER_PATH="/etc/ddnsmngr/servers"
-
-FORMAT="custom [SECTION] {\n\tusername\t= [USER]\n\tpassword\t= [PWD]\n\tddns-server\t= [SERV]\n\tddns-path\t= [URI]\n\tssl\t\t= [SSL]\n\thostname\t= [NAME]\n\tcheckip-command\t= [CMD]\n\tddns-response\t= [RESPONSES]\n}"
-
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-get_service_data() {
-	local provider="$1"
-	shift
-	local dir="$1"
-	shift
-	local ipv6="$1"
-	shift
-
-	local name data url answer script
-
-	[ $# -ne 2 ] && {
-		return 1
-	}
-
-	[ -f "${dir}/${provider}.json" ] || {
-		eval "$1=\"\""
-		eval "$2=\"\""
-		return 1
-	}
-
-	json_load_file "${dir}/${provider}.json"
-	json_get_var name "name"
-	if [ "$ipv6" -eq "1" ]; then
-		json_select "ipv6"
-	else
-		json_select "ipv4"
-	fi
-	json_get_var data "url"
-	json_get_var answer "answer"
-	json_select ".."
-	json_cleanup
-
-	response=""
-	if [ -n "${answer}" ]; then
-		answer=$(echo "${answer}" | sed 's/|/ /g')
-		for ans in $answer; do
-			if [ -z "${response}" ]; then
-				response="${ans}"
-			else
-				response="${response}, ${ans}"
-			fi
-		done
-		response="{ ${response} }"
-	fi
-
-	eval "$1=\"$data\""
-	eval "$2=\"$response\""
-
-	return 0
-}
-
-generate_inadyn_config() {
-	json_load "${1}"
-	json_get_var service_name service_name
-	json_get_var use_ipv6 use_ipv6
-	json_get_var interface interface
-	json_get_var username username
-	json_get_var password password
-	json_get_var host lookup_host
-	json_get_var conf_file config_file
-	json_get_var conf_dir config_dir
-	json_get_var server_address server_address
-	json_cleanup
-
-	if [ -z "${service_name}" ] || [ -z "${host}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_file}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_dir}" ]; then
-		return 1
-	fi
-
-	# First look into custom path to load the url otherwise default path
-	get_service_data "${service_name}" "${SERVER_PATH}" "${use_ipv6}" server_url server_answer
-
-	if [ -z "${server_url}" ]; then
-		return 1
-	fi
-
-	# Need to pick proto, server address and request uri separately from the url
-	# format http://[server_address]/[update_Request_uri]
-	proto=$(echo $server_url | cut -d':' -f 1)
-	serv=$(echo $server_url | cut -d'/' -f 3 | cut -d'@' -f 2)
-	uri=${server_url#*$serv}
-
-	if [ -z $proto ] || [ -z $serv ] || [ -z $uri ]; then
-		return 1
-	fi
-
-	path=$(echo "$uri" | sed 's/&/\\&/g')
-	update_uri=$(echo $path | sed -e "s#\[DOMAIN\]#%h#g"	-e "s#\[PASSWORD\]#%p#g" \
-				      -e "s#\[USERNAME\]#%u#g"	-e "s#\[IP\]#%i#g")
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	# now get the physical interface name
-	intf=$(ifstatus "${interface}" | jsonfilter -e '@.device')
-	if [ -z "${intf}" ]; then
-		return 1
-	fi
-
-	# command to get ip of the interface
-	if [ "${use_ipv6}" -eq 0 ]; then
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv4-address\\\\\"][0].address'\""
-	else
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv6-address\\\\\"][0].address'\""
-	fi
-
-	if [ "${proto}" = "http" ]; then
-		ssl="false"
-	else
-		ssl="true"
-	fi
-
-	inadyn_ver=$(inadyn -v)
-	user_agent="inadyn/${inadyn_ver}"
-
-	config_file="${conf_dir}/${conf_file}"
-	touch "${config_file}"
-
-	echo "iface = ${intf}" > "${config_file}"
-	echo "period = 600" >> "${config_file}"
-	echo "user-agent = ${user_agent}" >> "${config_file}"
-
-	if [ "${use_ipv6}" -eq 1 ]; then
-		echo "allow-ipv6 = true" >> "${config_file}"
-	fi
-
-	if [ -z "${password}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tpassword\\t= \[PWD\]\\n//g')
-	fi
-
-	if [ -z "${server_answer}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tddns-response\\t= \[RESPONSES\]\\n//g')
-	fi
-
-	config=$(echo $FORMAT | sed -e "s#\[SECTION\]#$conf_file#g"	-e "s#\[PWD\]#$password#g" \
-				    -e "s#\[USER\]#$username#g"	-e "s#\[SERV\]#$serv#g" \
-				    -e "s#\[URI\]#\"$update_uri\"#g"	-e "s#\[SSL\]#$ssl#g" \
-				    -e "s#\[NAME\]#$host#g"	-e "s#\[CMD\]#$get_ip#g" \
-				    -e "s#\[RESPONSES\]#$server_answer#g")
-
-	echo -e "\n\n${config}" >> "${config_file}"
-
-	return 0
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return
-	fi
-
-	service_section=$(uci show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return
-	fi
-
-	json_init
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_add_string "config_file" "${1}"
-	json_add_string "config_dir" "${CONFIGPATH}"
-
-	json_str=$(json_dump)
-	json_cleanup
-
-	generate_inadyn_config "${json_str}"
-
-	if [ "$?" -ne 0 ]; then
-		return
-	fi
-
-	CONFIG_FILES="${CONFIG_FILES} ${1}"
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	mkdir $CONFIGPATH
-	mkdir -p $PIDPATH
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	i=1
-	for conf in $CONFIG_FILES; do
-		instance="ddnsmngr_${i}"
-		i=$(( i + 1 ))
-
-		procd_open_instance $instance
-		procd_set_param command "$PROG"
-		procd_append_param command -f "${CONFIGPATH}/${conf}"
-		procd_append_param command -l debug
-		procd_append_param command -P "${PIDPATH}/${conf}"
-		procd_append_param command -n -C
-		procd_close_instance
-	done
-}
-
-stop_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 6
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=6.0.0.13
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d75639d9ae82538103123b32fc0de9280e84cabb
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +ieee1905-map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

dectmngr/Makefile

@@ -1,14 +1,20 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.6.6
+PKG_VERSION:=3.5.14
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=85c173d1fac535726b2e750be8c282b74fb7dbca
+PKG_SOURCE_VERSION:=4f16755f8ac09d373234565f050832c049bdf543
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -28,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
 endef
 
 define Package/$(PKG_NAME)/description

dectmngr/files/etc/init.d/dectmngr

@@ -6,61 +6,33 @@ START=70
 STOP=12
 
 USE_PROCD=1
+NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
+
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
+	pidof $NAME && killall -q $NAME
 
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
 		sleep 1
 	done
 }
 
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
 	local rxtun=
 
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
+	test $(db get hw.board.hasDect) = "0" && return
 
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -79,25 +51,18 @@ start_service() {
 	config_get log_dect_cmbs global log_dect_cmbs syslog
 
 	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
+	if [ "$log_dect_cmbs" = "none" ]; then
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	file)
+	elif [ "$log_dect_cmbs" = "file" ]; then
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	esac
+	fi
 
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
@@ -106,8 +71,9 @@ start_service() {
 }
 
 stop_service() {
-	has_dect || return 0
+	test $(db get hw.board.hasDect) = "0" && return
 
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
 	stop_and_wait_dectmngr
 }
 
@@ -115,13 +81,20 @@ reload_service() {
 	ubus call dect reload
 }
 
-service_triggers() {
+service_triggers()
+{
 	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
 	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
 }
 
 boot() {
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
+
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
+

dhcpmngr/Makefile

@@ -1,50 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dhcpmngr
-PKG_VERSION:=1.0.2
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dhcpmngr.git
-PKG_SOURCE_VERSION:=4c89a3f12686343e3cca23819255744ac06dfb22
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dhcpmngr
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Package to add Device.DHCPv4 and v6 data model support.
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +dnsmasq
-endef
-
-define Package/dhcpmngr/description
-  Package to add Device.DHCPv4. and Device.DHCPv6. data model support.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dhcpmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/dhcpmngr/install
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_lease_start_time.user $(1)/etc/udhcpc.user.d/udhcpc_lease_start_time.user
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdhcpmngr.so $(1) $(PKG_NAME)
-endef
-
-$(eval $(call BuildPackage,dhcpmngr))

dhcpmngr/files/etc/udhcpc.user.d/udhcpc_lease_start_time.user

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-leasestarttime="$(awk -F'.' '{print $1}' /proc/uptime 2> /dev/null)"
-target_file=/tmp/dhcp_client_info
-target_str="$INTERFACE $lease $leasestarttime"
-
-# if this interface is present in file, then replace it
-if grep -q "$INTERFACE" "$target_file" 2> /dev/null; then
-	# replace the whole line if pattern matches
-	sed -i "/${INTERFACE}/c\\${target_str}" "$target_file"
-else
-	# interface info was not present, append it to the file
-	echo "$target_str" >> "$target_file"
-fi

dnsmngr/Makefile

@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2022-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.7
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=f6223f6034a57753ae9d1552ab1334194b1deaff
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dnsmngr
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +dnsmasq +umdns
-  TITLE:=Package to add Device.DNS. datamodel support
-endef
-
-define Package/dnsmngr/description
-  Package to add Device.DNS. datamodel support.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/dnsmngr/install
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdnsmngr.so $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_SCRIPT) -d $(PKG_BUILD_DIR)/scripts/nslookup $(1)
-endef
-
-$(eval $(call BuildPackage,dnsmngr))

dslmngr/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018-2024 iopsys Software Solutions AB
+# Copyright (C) 2018 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,15 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.6
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE_VERSION:=2b1ecbd2079dbd88ed6d58b277b91dcf5038d869
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -26,9 +25,8 @@ PKG_LICENSE_FILES:=LICENSE
 
 
 include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
 else
   $(info Unexpected CONFIG_TARGET)
@@ -40,7 +38,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy +libbbfdm-api
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
 endef
 
 define Package/dslmngr/description
@@ -61,7 +59,7 @@ MAKE_FLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-	rsync -r --exclude=.* ./dslmngr/ $(PKG_BUILD_DIR)/
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -70,14 +68,8 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/etc/dsl
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfdsl.so $(1) $(PKG_NAME)
 endef
 
 $(eval $(call BuildPackage,dslmngr))

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables --concurrent -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables --concurrent -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,8 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+        commit firewall
+EOT

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,130 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=6.5.60
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=ec2e8d0341e246ff371481ae20418d8301dfcf12
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

ebtables-extensions/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ebtables-extensions
-PKG_VERSION:=1.0.4
-PKG_LICENSE:=GPL-2.0
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=35fb79f95c47d90e3791c7e126048b451f078f24
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ebtables-extensions.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/vlantranslation
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables VLAN translation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_vlantranslation.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_vlantranslation,1)
-  KCONFIG:=
-endef
-
-define KernelPackage/dscp2pbit
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for DSCP-to-Pbit mapping
-  DEPENDS+=+kmod-ebtables
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dscp2pbit.ko
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dscp2pbit,1)
-  KCONFIG:=
-endef
-
-define KernelPackage/vlantranslation/description
-	Kernel module to enable VLAN translation for ebtables
-endef
-
-define KernelPackage/dscp2pbit/description
-	Kernel module to enableDSCP-to-Pbit mapping for ebtables
-endef
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-endif
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ./src/* $(PKG_BUILD_DIR)/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endef
-else
-define Build/Prepare
-	$(Build/Prepare/Default)
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endef
-endif
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(1)/include/uapi/linux/netfilter_bridge/
-endef
-
-KERNEL_MAKE_FLAGS += -I$(LINUX_DIR)/include
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)/src" modules
-endef
-
-$(eval $(call KernelPackage,vlantranslation))
-$(eval $(call KernelPackage,dscp2pbit))

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptmngr
+PKG_VERSION:=0.11
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=2d56ea0d6c45e618c92bc6d63802ffdc5c307740
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom Voice Endpoint Manager
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
+
+define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Config.in

@@ -1,9 +0,0 @@
-if (PACKAGE_ethmngr)
-
-menu "Configurations"
-
-config TR181_VENDOR_EXTENSIONS_MACVLAN
-	bool "Use TR181 vendor extension MACVLAN"
-	default y
-endmenu
-endif

ethmngr/Makefile

@@ -1,33 +1,29 @@
 #
-# Copyright (C) 2020-2024 Iopsys
+# Copyright (C) 2020 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.9
+PKG_VERSION:=2.0.1
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=2d35e86cc8dfd7ef4e0d8579f5d314e90faadc90
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
-endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
 
 define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl +libeasy +libbbfdm-api
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -36,43 +32,15 @@ define Package/ethmngr/description
  It uses APIs from the libethernet.so library.
 endef
 
-define Package/$(PKG_NAME)/config
-       source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./ethmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE \
-	-DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
-
-ifeq ($(CONFIG_TR181_VENDOR_EXTENSIONS_MACVLAN),y)
-TARGET_CFLAGS += -DTR181_VENDOR_EXTENSIONS_MACVLAN
-endif
-
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
+	-D_GNU_SOURCE
 
 define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/ethmngr
-	$(INSTALL_DIR) $(1)/etc/ethmngr/plugins
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfethernet.so $(1) $(PKG_NAME)
-ifeq ($(CONFIG_TR181_VENDOR_EXTENSIONS_MACVLAN),y)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/libbbfethernetmacvlan.so $(1) $(PKG_NAME)
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/etc/hotplug.d/ethernet/ethport-deprecated-ubus-event

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-[ -n "$PORT" -a -n "$LINK" ] || exit 0
-
-case "$PORT" in
-	# do not generate ethport ubus event
-	# for wifi, dsl and brige devices
-	wl*|wds*|atm*|ptm*|br-*)
-		exit 0
-	;;
-esac
-
-speed=0
-duplex=full
-
-if [ "$LINK" = "up" ]; then
-	devspeed="$(ubus -t 2 call network.device status "{\"name\":\"$PORT\"}" | jsonfilter -e @.speed)"
-	speed=${devspeed:0:-1}
-	duplex=${devspeed:0-1}
-	[ "$duplex" == "H" ] && duplex="half" || duplex="full"
-fi
-
-ubus send ethport "{\"ifname\":\"$PORT\",\"link\":\"$LINK\",\"speed\":\"$speed\",\"duplex\":\"$duplex\"}"

ethmngr/files/etc/init.d/ethmngr

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger network
-}

ethmngr/files/etc/ruleng/ethport.json

@@ -1,20 +0,0 @@
-{
-	"ethport_update": {
-		"if" : [
-			{
-				"event": "network.device"
-			}
-		],
-		"then" : [
-			{
-				"cli": "/sbin/hotplug-call ethernet",
-				"envs": {
-					"PORT": "&network.device->ifname",
-					"LINK": "&network.device->link"
-				},
-				"timeout": 1
-			}
-		]
-	}
-}
-

ethmngr/files/etc/uci-defaults/ruleng.ethport

@@ -1,2 +0,0 @@
-uci -q set ruleng.ethport=rule
-uci -q set ruleng.ethport.recipe='/etc/ruleng/ethport.json'

ethmngr/files/ethmngr.init

@@ -4,13 +4,12 @@ START=95
 STOP=10
 
 USE_PROCD=1
-PROG=/usr/sbin/csmngr
+PROG=/usr/sbin/ethmngr
 
 start_service() {
 	procd_open_instance
 	procd_set_param command ${PROG}
-#	procd_set_param stderr 1                    #for debugging only
-#	procd_set_param respawn
+	procd_set_param respawn
 	procd_close_instance
 }
 
@@ -18,4 +17,3 @@ reload_service() {
         stop
         start
 }
-

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=0ebaf1e7d1f09318ae75d0f475a25280742b790e
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2

firewallmngr/Config.in

@@ -1,12 +0,0 @@
-if PACKAGE_firewallmngr
-
-menu "Configuration"
-
-config FIREWALLMNGR_PORT_TRIGGER
-	bool "Include Device.NAT.PortTrigger"
-	default y
-	help
-	   Set this option to include support for PortTrigger object.
-
-endmenu
-endif

firewallmngr/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=firewallmngr
-PKG_VERSION:=1.0.5
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/firewallmngr.git
-PKG_SOURCE_VERSION:=94246676dc2e2db29b94fcffec1be3cee3ec8e9f
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/firewallmngr
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Package to add Device.Firewall and Device.NAT. data model support.
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +firewall
-  DEPENDS+=+FIREWALLMNGR_PORT_TRIGGER:kmod-ipt-trigger +FIREWALLMNGR_PORT_TRIGGER:kmod-ip6t-trigger
-  DEPENDS+=+FIREWALLMNGR_PORT_TRIGGER:iptables-mod-nfqueue
-endef
-
-define Package/firewallmngr/description
-  Package to add Device.Firewall. and Device.NAT. data model support.
-endef
-
-define Package/$(PKG_NAME)/config
-        source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/firewallmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-ifeq ($(CONFIG_FIREWALLMNGR_PORT_TRIGGER),y)
-	TARGET_CFLAGS += -DINCLUDE_PORT_TRIGGER
-endif
-
-define Package/firewallmngr/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-ifeq ($(CONFIG_FIREWALLMNGR_PORT_TRIGGER),y)
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/port-trigger
-
-	$(INSTALL_BIN) ./files/port-trigger/etc/init.d/port-trigger $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/port-trigger/etc/config/port-trigger $(1)/etc/config/
-	$(INSTALL_DATA) ./files/port-trigger/lib/port-trigger/port_trigger.sh $(1)/lib/port-trigger/
-endif
-	$(INSTALL_BIN) ./files/firewall.portmap $(1)/etc/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/
-
-	$(INSTALL_BIN) ./files/firewall.service $(1)/etc/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/
-
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libfirewallmngr.so $(1) $(PKG_NAME)
-endef
-
-$(eval $(call BuildPackage,firewallmngr))

firewallmngr/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

firewallmngr/files/etc/uci-defaults/97-firewall-service

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.service_hook
-        set firewall.service_hook=include
-        set firewall.service_hook.path=/etc/firewall.service
-        set firewall.service_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

firewallmngr/files/firewall.portmap

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.dnat -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Now add rules as per datamodel precedence shown below
-		## Non empty remote host, empty dport
-		## empty remote host, non empty dport
-		## empty remote host, empty dport
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

firewallmngr/files/firewall.service

@@ -1,163 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.service -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-		echo "-1"
-		return 0
-	fi
-
-	echo "0"
-	return 0
-}
-
-add_iptable_rule() {
-	chain_name=$1
-	protocol=$2
-	dest_port=$3
-	icmp_type=$4
-	family=$5
-	src_prefix=$6
-	action=$7
-	res=-1
-
-	cmd="-I ${chain_name}"
-
-	if [ -n "${protocol}" ]; then
-		cmd="${cmd} -p $protocol"
-
-		if [ "${protocol}" -eq 41 ] || [ "${protocol}" -eq 43 ] || [ "${protocol}" -eq 44 ] ||
-		   [ "${protocol}" -eq 58 ] || [ "${protocol}" -eq 59 ] || [ "${protocol}" -eq 60 ]; then
-		   	# Explicit v6 protocols
-			if [ "${family}" = "ipv4" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv6"
-			fi
-		elif [ "${protocol}" -eq 1 ]; then
-		   	# Explicit v4 protocols
-			if [ "${family}" = "ipv6" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv4"
-			fi
-		fi
-
-		# Limitation:: iptables do not accept dport without specific protocol
-		count=$(echo "${dest_port}" | sed -n "/-1/p" | wc -l)
-
-		if [ "${count}" -eq 0 ]; then
-			# dest_port not contains -1 so need to have this match criteria
-			count=$(echo "${dest_port}" | wc -w)
-			if [ "${count}" -gt 1 ]; then
-				# multiple ports present
-				port=$(echo "${dest_port}" | sed "s/ /,/g")
-				cmd="${cmd} -m multiport --dports ${port}"
-			else
-				cmd="${cmd} --dport ${dest_port}"
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv4" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 1 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmp-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "iptables ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-		else
-			#Add ipv4 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 0 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "iptables -s $src_list ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv6" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 58 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmpv6-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "ip6tables ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-		else
-			#Add ipv6 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 1 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "ip6tables -s $src_list ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	echo $res
-}
-
-add_service() {
-	local enable proto family dest_port interface target icmp_type
-
-	config_get enable "$1" enable "0"
-	config_get icmp_type "$1" icmp_type "-1"
-	config_get target "$1" target "Accept"
-	config_get interface "$1" interface ""
-	config_get family "$1" family "-1"
-	config_get dest_port "$1" dest_port "-1"
-	config_get proto "$1" proto "-1"
-	config_get src_prefix "$1" src_prefix ""
-
-	if [ "${enable}" -eq 0 ] || [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	action=$(echo "${target}" | tr a-z A-Z)
-	chain_name="zone_${interface}_input"
-	res=0
-
-	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
-
-	if [ "${count}" -eq 0 ]; then
-		# proto not contains -1 so need to have this match criteria
-		for protocol in $proto; do
-			res=$(add_iptable_rule "$chain_name" "$protocol" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-		done
-	else
-		# proto contains -1 so no need to have this match criteria
-		res=$(add_iptable_rule "$chain_name" "" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-	fi
-
-	if [ "${res}" -ne 0 ]; then
-		uci -q set firewall."${1}".status="Error"
-	else
-		uci -q set firewall."${1}".status=""
-	fi
-
-	uci commit firewall
-}
-
-config_load firewall
-config_foreach add_service "service"

firewallmngr/files/port-trigger/etc/config/port-trigger

@@ -1 +0,0 @@
-#port trigger uci file

firewallmngr/files/port-trigger/etc/init.d/port-trigger

@@ -1,21 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=20
-USE_PROCD=1
-
-. /lib/port-trigger/port_trigger.sh
-
-start_service() {
-	port_trigger_handling
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger firewall
-	procd_add_reload_trigger port-trigger
-}
-
-reload_service() {
-	start
-}

firewallmngr/files/port-trigger/lib/port-trigger/port_trigger.sh

@@ -1,157 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-process_port_trigger() {
-	local rule_id="$1"
-	local is_enabled=""
-	local duration=""
-	local trigger_dport=""
-	local trigger_dport_end=""
-	local protocol=""
-	local interface=""
-	local open_dport=""
-	local open_dport_end=""
-	local open_protocol=""
-	local ptg_id=""
-	local IP_RULE=""
-	local IP6_RULE=""
-	local IP_RULE_FWD=""
-
-	get_port_trigger() {
-		local ptg_name
-		config_get ptg_name "$1" "name"
-		if [ "$ptg_name" == "$2" ]; then
-			ptg_id="$1"
-			return
-		fi
-	}
-
-	ptg_id=""
-	config_get name "$rule_id" "port_trigger"
-	config_foreach get_port_trigger  "port_trigger" "$name"
-	[ -z "$ptg_id" ] && return
-
-	is_enabled=$(uci -q get port-trigger."$ptg_id".enable)
-
-	if [ -z "$is_enabled" ] || [ "$is_enabled" = "0" ]; then
-		return
-	fi
-
-	protocol=$(uci -q get port-trigger."$ptg_id".protocol)
-	[ -z "$protocol" ] && return
-
-	if [ "$protocol" = "UDP" ] || [ "$protocol" = "udp" ]; then
-		IP_RULE="$IP_RULE -p udp"
-		IP6_RULE="$IP6_RULE -p udp"
-		IP_RULE_FWD="$IP_RULE_FWD -p udp"
-	elif [ "$protocol" = "TCP" ] || [ "$protocol" = "tcp" ]; then
-		IP_RULE="$IP_RULE -p tcp"
-		IP6_RULE="$IP6_RULE -p tcp"
-		IP_RULE_FWD="$IP_RULE_FWD -p tcp"
-	else
-		return
-	fi
-
-	trigger_dport=$(uci -q get port-trigger."$ptg_id".port)
-	[ -z "$trigger_dport" ] && return
-	IP_RULE="$IP_RULE --dport $trigger_dport"
-	IP6_RULE="$IP6_RULE --dport $trigger_dport"
-
-	trigger_dport_end=$(uci -q get port-trigger."$ptg_id".end_port_range)
-	if [ -n "$trigger_dport_end" ]; then
-		IP_RULE="$IP_RULE:$trigger_dport"
-		IP6_RULE="$IP6_RULE:$trigger_dport"
-	fi
-
-	config_get open_protocol "$rule_id" "protocol"
-	if [ "$open_protocol" = "UDP" ] || [ "$open_protocol" = "udp" ]; then
-		IP_RULE="$IP_RULE -j TRIGGER --trigger-type out --trigger-proto udp"
-		IP6_RULE="$IP6_RULE -j TRIGGER --trigger-type out --trigger-proto udp"
-	elif [ "$open_protocol" = "TCP" ] || [ "$open_protocol" = "tcp" ]; then
-		IP_RULE="$IP_RULE -j TRIGGER --trigger-type out --trigger-proto tcp"
-		IP6_RULE="$IP6_RULE -j TRIGGER --trigger-type out --trigger-proto tcp"
-	else
-		return
-	fi
-
-	config_get open_dport "$rule_id" "port"
-	[ -z "$open_dport" ] && return
-	IP_RULE="$IP_RULE --trigger-match $open_dport"
-	IP6_RULE="$IP6_RULE --trigger-match $open_dport"
-	IP_RULE_FWD="$IP_RULE_FWD --dport $open_dport"
-
-	config_get open_dport_end "$rule_id" "end_port_range"
-	if [ -z "$open_dport_end" ]; then
-		IP_RULE="$IP_RULE --trigger-relate $open_dport"
-		IP6_RULE="$IP6_RULE --trigger-relate $open_dport"
-	else
-		IP_RULE="$IP_RULE-$open_dport_end --trigger-relate $open_dport-$open_dport_end"
-		IP6_RULE="$IP6_RULE-$open_dport_end --trigger-relate $open_dport-$open_dport_end"
-		IP_RULE_FWD="$IP_RULE_FWD:$open_dport_end"
-	fi
-
-	duration=$(uci -q get port-trigger."$ptg_id".auto_disable_duration)
-        if [ -n "$duration" ]; then
-                IP_RULE="$IP_RULE --trigger-timeout $duration"
-                IP6_RULE="$IP6_RULE --trigger-timeout $duration"
-        fi
-
-	interface=$(uci -q get port-trigger."$ptg_id".src)
-	[ -z "$interface" ] && return
-	device=$(uci -q get network.$interface.device)
-       	IP_RULE_1="iptables -w -t nat -A prerouting_porttrigger -i $device $IP_RULE"
-       	echo "$IP_RULE_1">>/tmp/port_trigger_iptables
-
-       	IP_RULE_1="ip6tables -w -t nat -A prerouting_porttrigger -i $device $IP6_RULE"
-       	echo "$IP_RULE_1">>/tmp/port_trigger_ip6tables
-
-        if [ -n "$duration" ]; then
-		echo "iptables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in --trigger-timeout $duration">>/tmp/port_trigger_iptables
-		echo "ip6tables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in --trigger-timeout $duration">>/tmp/port_trigger_ip6tables
-
-		echo "iptables -w -t nat -A prerouting_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type dnat --trigger-timeout $duration">>/tmp/port_trigger_iptables
-	else
-		echo "iptables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in">>/tmp/port_trigger_iptables
-		echo "ip6tables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in">>/tmp/port_trigger_ip6tables
-
-		echo "iptables -w -t nat -A prerouting_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type dnat">>/tmp/port_trigger_iptables
-	fi
-}
-
-port_trigger_handling() {
-	rm /tmp/port_trigger_iptables 2> /dev/null
-	rm /tmp/port_trigger_ip6tables 2> /dev/null
-	touch /tmp/port_trigger_iptables
-	touch /tmp/port_trigger_ip6tables
-
-	echo "iptables -w -t nat -F prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t filter -F forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t nat -F prerouting_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "ip6tables -w -t nat -F prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	echo "ip6tables -w -t filter -F forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-
-	echo "iptables -w -t nat -N prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t nat -I PREROUTING -j prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t filter -N forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t filter -I forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t nat -N prerouting_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t nat -I prerouting_wan_rule -j prerouting_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-
-	echo "ip6tables -w -t nat -N prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	ret=$?
-	[ $ret -eq 0 ] && echo "ip6tables -w -t nat -I PREROUTING -j prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	echo "ip6tables -w -t filter -N forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	ret=$?
-	[ $ret -eq 0 ] && echo "ip6tables -w -t filter -I forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-
-	# Load /etc/config/port-trigger UCI file
-	config_load port-trigger
-	config_foreach process_port_trigger rule
-
-	sh /tmp/port_trigger_iptables
-	sh /tmp/port_trigger_ip6tables
-}

fluent-bit/Makefile

@@ -1,176 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fluent-bit
-PKG_VERSION:=3.1.0
-PKG_RELEASE:=1
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit.git
-PKG_SOURCE_VERSION=v$(PKG_VERSION)
-PKG_MIRROR_HASH:=9bedfabf859b88a2cfcf51cc17669b83a170e85427ce562131366cb1542b52ae
-endif
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/fluent-bit
-	CATEGORY:=Utilities
-	DEPENDS:= +libyaml +libopenssl +libcurl +libatomic +musl-fts +flex +bison
-	TITLE:=Fluent-Bit
-	URL:=https://fluentbit.io/
-endef
-
-define Package/fluent-bit/description
-	Fluent Bit is a super fast, lightweight, and highly scalable logging and metrics processor and forwarder.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./fluent-bit/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-# General options
-TARGET_LDFLAGS +=-lfts -latomic
-
-CMAKE_OPTIONS+= \
-	-DFLB_RELEASE=Yes \
-	-DFLB_SMALL=No \
-	-DEXCLUDE_FROM_ALL=true \
-	-DFLB_SHARED_LIBS=Yes \
-	-DFLB_DEBUG=Yes \
-	-DFLB_ALL=No \
-	-DFLB_JEMALLOC=No \
-	-DFLB_EXAMPLES=No \
-	-DFLB_CHUNK_TRACE=No \
-	-DFLB_BACKTRACE=No \
-	-DFLB_WASM=No \
-	-DFLB_LUAJIT=No
-
-# In plugins
-CMAKE_OPTIONS += \
-	-DFLB_IN_SYSLOG=Yes \
-	-DFLB_IN_CPU=Yes \
-	-DFLB_IN_MEM=Yes \
-	-DFLB_IN_DISK=Yes \
-	-DFLB_IN_EXEC=Yes \
-	-DFLB_IN_HEAD=Yes \
-	-DFLB_IN_FORWARD=No \
-	-DFLB_IN_KMSG=No \
-	-DFLB_IN_PROC=No \
-	-DFLB_IN_RANDOM=No \
-	-DFLB_IN_SERIAL=No \
-	-DFLB_IN_MQTT=No \
-	-DFLB_IN_STDIN=No \
-	-DFLB_IN_SYSTEMD=No \
-	-DFLB_IN_TAIL=No \
-	-DFLB_IN_TCP=No \
-	-DFLB_IN_THERMAL=No \
-	-DFLB_IN_UDP=No \
-	-DFLB_IN_DOCKER=No \
-	-DFLB_IN_EXEC_WASI=No \
-	-DFLB_IN_EVENT_TYPE=No \
-	-DFLB_IN_FLUENTBIT_METRICS=No \
-	-DFLB_IN_KUBERNETES_EVENTS=No \
-	-DFLB_IN_KAFKA=No \
-	-DFLB_IN_LIB=No \
-	-DFLB_IN_SYSTEMD=No \
-	-DFLB_IN_DUMMY=No \
-	-DFLB_IN_NETIF=No \
-	-DFLB_IN_COLLECTD=No \
-	-DFLB_IN_PROMETHEUS_SCRAPE=No \
-	-DFLB_IN_STATSD=No \
-	-DFLB_IN_STORAGE_BACKLOG=No \
-	-DFLB_IN_PODMAN_METRICS=No \
-	-DFLB_IN_OPENTELEMETRY=No \
-	-DFLB_IN_ELASTICSEARCH=No \
-	-DFLB_IN_CALYPTIA_FLEET=No \
-	-DFLB_IN_SPLUNK=No
-	-DFLB_IN_HEALTH=No \
-	-DFLB_IN_WINLOG=No \
-	-DFLB_IN_WINEVTLOG=No
-
-
-# Filter options
-CMAKE_OPTIONS += 
-	-DFLB_FILTER_AWS=No \
-	-DFLB_FILTER_ECS=No \
-	-DFLB_FILTER_KUBERNETES=No \
-	-DFLB_FILTER_LUA=No \
-	-DFLB_FILTER_NEST=No \
-	-DFLB_FILTER_RECORD_MODIFIER=No \
-	-DFLB_FILTER_THROTTLE=No \
-	-DFLB_FILTER_TYPE_CONVERTER=No \
-	-DFLB_FILTER_WASM=No \
-	-DFLB_FILTER_TENSORFLOW=No \
-	-DFLB_FILTER_GEOIP2=No \
-	-DFLB_FILTER_NIGHTFALL=No
-
-# out plugins
-CMAKE_OPTIONS += \
-	-DFLB_OUT_EXIT=Yes \
-	-DFLB_OUT_FORWARD=Yes \
-	-DFLB_OUT_HTTP=Yes \
-	-DFLB_OUT_NATS=Yes \
-	-DFLB_OUT_TCP=Yes \
-	-DFLB_OUT_UDP=Yes \
-	-DFLB_OUT_FILE=Yes \
-	-DFLB_OUT_STDOUT=Yes \
-	-DFLB_OUT_SYSLOG=Yes \
-	-DFLB_OUT_NULL=Yes \
-	-DFLB_OUT_PLOT=No \
-	-DFLB_OUT_AZURE=No \
-	-DFLB_OUT_AZURE_BLOB=No \
-	-DFLB_OUT_AZURE_LOGS_INGESTION=No \
-	-DFLB_OUT_AZURE_KUSTO=No \
-	-DFLB_OUT_BIGQUERY=No \
-	-DFLB_OUT_CALYPTIA=No \
-	-DFLB_OUT_COUNTER=No \
-	-DFLB_OUT_DATADOG=No \
-	-DFLB_OUT_ES=No \
-	-DFLB_OUT_GELF=No \
-	-DFLB_OUT_INFLUXDB=No \
-	-DFLB_OUT_NRLOGS=No \
-	-DFLB_OUT_OPENSEARCH=No \
-	-DFLB_OUT_TD=No \
-	-DFLB_OUT_SKYWALKING=No \
-	-DFLB_OUT_SLACK=No \
-	-DFLB_OUT_SPLUNK=No \
-	-DFLB_OUT_STACKDRIVER=No \
-	-DFLB_OUT_LIB=No \
-	-DFLB_OUT_FLOWCOUNTER=No \
-	-DFLB_OUT_LOGDNA=No \
-	-DFLB_OUT_LOKI=No \
-	-DFLB_OUT_KAFKA=No \
-	-DFLB_OUT_KAFKA_REST=No \
-	-DFLB_OUT_CLOUDWATCH_LOGS=No \
-	-DFLB_OUT_KINESIS_FIREHOSE=No \
-	-DFLB_OUT_KINESIS_STREAMS=No \
-	-DFLB_OUT_OPENTELEMETRY=No \
-	-DFLB_OUT_PROMETHEUS_EXPORTER=No \
-	-DFLB_OUT_PROMETHEUS_REMOTE_WRITE=No \
-	-DFLB_OUT_S3=No \
-	-DFLB_OUT_VIVO_EXPORTER=No \
-	-DFLB_OUT_WEBSOCKET=No \
-	-DFLB_OUT_ORACLE_LOG_ANALYTICS=No \
-	-DFLB_OUT_CHRONICLE=No \
-	-DFLB_OUT_PGSQL=No
-
-define Package/fluent-bit/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/fluent-bit
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/fluent-bit $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/fluent-bit.conf $(1)/etc/fluent-bit/fluent-bit.conf
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/conf/parsers.conf $(1)/etc/fluent-bit/parsers.conf
-endef
-
-$(eval $(call BuildPackage,fluent-bit))

fluent-bit/files/fluent-bit.conf

@@ -1,15 +0,0 @@
-[SERVICE]
-    flush           3
-    daemon          Off
-    log_level       info
-    parsers_file    /etc/fluent-bit/parsers.conf
-
-[INPUT]
-    name            syslog
-    tag             syslog
-    path            /dev/log
-
-[OUTPUT]
-    name            null
-    match           *
-

fluent-bit/patches/0001-fix_out_file_plugin.patch

@@ -1,14 +0,0 @@
-diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
-index 2e47c9666..42ace24c6 100644
---- a/plugins/out_file/file.c
-+++ b/plugins/out_file/file.c
-@@ -45,6 +45,9 @@
- #define NEWLINE "\n"
- #endif
- 
-+#undef PATH_MAX
-+#define PATH_MAX 256
-+
- struct flb_file_conf {
-     const char *out_path;
-     const char *out_file;

fscryptctl/Makefile

@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fscryptctl
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/google/fscryptctl.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Encryption
-  TITLE:=Fscryptctl
-endef
-
-define Package/$(PKG_NAME)/description
-	fscryptctl is a low-level tool written in C that handles raw keys and manages policies for Linux filesystem encryption,
-	specifically the "fscrypt" kernel interface which is supported by the ext4, f2fs, and UBIFS filesystems
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		fscryptctl
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fscryptctl $(1)/usr/bin/fscryptctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcm963xx-bsp
+  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,8 +41,20 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	MODULES_SUBDIR:=lib/modules/4.19.183
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
 
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -220,6 +220,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	}
 
@@ -227,6 +228,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
@@ -244,6 +246,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	}
 
@@ -251,6 +254,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

hostmngr/Config.in

@@ -1,15 +0,0 @@
-if (PACKAGE_hostmngr)
-
-menu "Configuration"
-
-config HOSTMNGR_HOSTS_HISTORY
-	bool "Keep history of hosts"
-	default y
-
-config HOSTMNGR_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
-
-endmenu
-
-endif

hostmngr/Makefile

@@ -1,75 +0,0 @@
-#
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostmngr
-PKG_VERSION:=1.2.6
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa365710b227ba82b1c43f9cdf497261edb21852
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/hostmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Show and manage hosts in the network
-  DEPENDS= +libubox +libuci +libubus +ubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +libnfnetlink +libmnl \
-	   +libnetfilter-conntrack \
-	   +HOSTMNGR_PLATFORM_HAS_WIFI:libwifi +libbbfdm-api \
-	   +libwifiutils
-
-endef
-
-define Package/hostmngr/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/hostmngr/description
- This package provides hostmngr that can detect and show host devices
- present in the network.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
-	-D_GNU_SOURCE
-
-ifeq ($(CONFIG_HOSTMNGR_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
-endif
-
-MAKE_PATH:=src
-
-define Package/hostmngr/install
-	$(CP) ./files/etc $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/hostmngr $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share/hostmngr
-	$(INSTALL_DATA) ./files/scripts/hosts_acl.sh $(1)/usr/share/hostmngr/
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/bbf_plugin/libhostmngr.so $(1) $(PKG_NAME)
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -r --exclude=.* ~/git/hostmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,hostmngr))

hostmngr/files/etc/config/hosts

@@ -1,9 +0,0 @@
-
-config global 'global'
-	option enabled '1'
-	option history '1'
-	option history_file '/etc/hosts_history.json'
-	option history_timeout '86400'
-
-config interface
-	list ifname 'br-lan'

hostmngr/files/etc/firewall.hosts

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-sh /usr/share/hostmngr/hosts_acl.sh

hostmngr/files/etc/uci-defaults/992-firewall_host.ucidefaults

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-if [ -f /etc/firewall.hosts ]; then
-	uci -q get firewall.hosts || {
-		uci -q set firewall.hosts=include
-		uci -q set firewall.hosts.path="/etc/firewall.hosts"
-		uci -q set firewall.hosts.reload=1
-	}
-fi
-
-
-exit 0

hostmngr/files/etc/uci-defaults/993-topology-hosts-to-hostmngr-hosts-config

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-uci -q get hosts.global.ageing_timer || exit 0
-
-
-# Old hosts UCI config is detected; Convert to new format
-
-ageing_timer="$(uci -q get hosts.global.ageing_timer)"
-history_timeout=$((ageing_timer*60))
-
-uci -q set hosts.global.enabled=1
-uci -q delete hosts.global.ageing_timer
-uci -q set hosts.global.history_timeout="$history_timeout"
-uci -q rename hosts.global.reboot_persistent=history
-uci -q set hosts.global.history_file="/etc/hosts_history.json"
-
-uci -q add hosts interface
-for ifname in $(uci -q get hosts.global.ifname); do
-	uci -q add_list hosts.@interface[-1].ifname="$ifname"
-done
-
-uci -q delete hosts.global.ifname
-exit 0

hostmngr/files/scripts/hosts_acl.sh

@@ -1,299 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-day=""
-next_days=""
-prev_days=""
-schedule_added=""
-
-ACCESS_RULE=""
-IP_RULE=""
-IP_RULE1=""
-
-get_next_day() {
-	local weekday="$1"
-	case "$weekday" in
-		"Mon"|"Monday") echo "Tuesday"
-		;;
-		"Tue"|"Tuesday") echo "Wednesday"
-		;;
-		"Wed"|"Wednesday") echo "Thursday"
-		;;
-		"Thu"|"Thursday") echo "Friday"
-		;;
-		"Fri"|"Friday") echo "Saturday"
-		;;
-		"Sat"|"Saturday") echo "Sunday"
-		;;
-		"Sun"|"Sunday") echo "Monday"
-		;;
-	esac
-}
-
-get_previous_day() {
-	local weekday="$1"
-	case "$weekday" in
-		"Mon"|"Monday") echo "Sunday"
-		;;
-		"Tue"|"Tuesday") echo "Monday"
-		;;
-		"Wed"|"Wednesday") echo "Tuesday"
-		;;
-		"Thu"|"Thursday") echo "Wednesday"
-		;;
-		"Fri"|"Friday") echo "Thursday"
-		;;
-		"Sat"|"Saturday") echo "Friday"
-		;;
-		"Sun"|"Sunday") echo "Saturday"
-		;;
-	esac
-}
-
-ip_rule_west_zone() {
-	local utc_start_t_h="$1"
-	local utc_stop_t_h="$2"
-	local local_start_t_h="$3"
-	local local_stop_t_h="$4"
-	local utc_start_time="$5"
-	local utc_stop_time="$6"
-
-	if [ "$utc_start_t_h" -lt "$local_start_t_h" ]; then
-		IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		if [ -n "$next_days" ]; then
-			IP_RULE="$IP_RULE --weekdays $next_days"
-		fi
-	else
-		if [ "$utc_stop_t_h" -lt "$local_stop_t_h" ]; then
-			IP_RULE1="$IP_RULE"
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop 23:59"
-			IP_RULE1="$IP_RULE1 -m time --timestart 00:00 --timestop $utc_stop_time"
-			if [ -n "$next_days" ]; then
-				IP_RULE1="$IP_RULE1 --weekdays $next_days"
-			fi
-		else
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		fi
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	fi
-}
-
-ip_rule_east_zone() {
-	local utc_start_t_h="$1"
-	local utc_stop_t_h="$2"
-	local local_start_t_h="$3"
-	local local_stop_t_h="$4"
-	local utc_start_time="$5"
-	local utc_stop_time="$6"
-
-	if [ "$utc_start_t_h" -lt "$local_start_t_h" ]; then
-		IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	else
-		if [ "$utc_stop_t_h" -lt "$local_stop_t_h" ]; then
-			IP_RULE1="$IP_RULE"
-			IP_RULE="$IP_RULE -m time --timestart 00:00 --timestop $utc_stop_time"
-			IP_RULE1="$IP_RULE1 -m time --timestart $utc_start_time --timestop 23:59"
-			if [ -n "$prev_days" ]; then
-				IP_RULE1="$IP_RULE1 --weekdays $prev_days"
-			fi
-		else
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		fi
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	fi
-}
-
-
-add_access_rule() {
-	local rule="$1"
-	echo "iptables -w -A hosts_forward ${rule}" >> $ACL_FILE
-	echo "ip6tables -w -A hosts_forward ${rule}" >> $ACL_FILE
-}
-
-handle_day_list() {
-	local value=$1
-
-	val=$(echo $value | cut -c 1-3)
-	next_day_val=$(get_next_day $val)
-	prev_day_val=$(get_previous_day $val)
-	if [ -z $day ]; then
-		day="$val"
-		next_days="$next_day_val"
-		prev_days="$prev_day_val"
-	else
-		day="$day,$val"
-		next_days="$next_days,$next_day_val"
-		prev_days="$prev_days,$prev_day_val"
-	fi
-}
-
-handle_schedule() {
-	local schd_section="$1"
-	local ac_section="$2"
-	local acs_id
-	local start_time
-	local duration
-
-	IP_RULE="$ACCESS_RULE"
-	IP_RULE1=""
-	day=""
-	next_days=""
-	prev_days=""
-
-	config_get acs_id "$schd_section" "dm_parent"
-
-	if [ "$acs_id" != "$ac_section" ]; then
-		return # schedule not for this access control section
-	fi
-
-	local is_enabled
-	config_get is_enabled "$schd_section" "enable" 0
-	if [ "$is_enabled" == "0" ]; then
-		return
-	fi
-
-	local all_days="Monday Tuesday Wednesday Thursday Friday Saturday Sunday"
-	local day_config
-	config_get day_config "$schd_section" "day" "$all_days"
-
-	IFS=" "
-	for d in $day_config; do
-		handle_day_list $d
-	done
-
-	config_get start_time "$schd_section" "start_time" "00:00"
-	config_get duration "$schd_section" "duration"
-
-	zone=$(date +%z | cut -c 1)
-	local_start_time=$start_time
-	hh=$(echo $local_start_time | awk -F: '{ print $1 }')
-	mm=$(echo $local_start_time | awk -F: '{ print $2 }')
-	hh_s=`expr $hh \* 3600`
-	mm_s=`expr $mm \* 60`
-	ss=$(( hh_s + mm_s ))
-	local_start_hh=$hh
-
-        if [ -n "$duration" ]; then
-                stop_ss=$(( ss + duration ))
-                hh=$(( stop_ss / 3600 ))
-               	rem_ss=$(( stop_ss % 3600 ))
-               	mm=$(( rem_ss / 60 ))
-               	ss=$(( rem_ss % 60 ))
-		local_stop_time="$hh:$mm:$ss"
-		local_stop_hh=$hh
-	else
-		# if duartion is not specified, then apply rule to end of the day
-		local_stop_time="23:59:59"
-		local_stop_hh="23"
-	fi
-
-	utc_start_time=$(date -u -d @$(date "+%s" -d "$local_start_time") +%H:%M)
-	utc_stop_time=$(date -u -d @$(date "+%s" -d "$local_stop_time") +%H:%M)
-	utc_start_hh=$(echo $utc_start_time | awk -F: '{ print $1 }')
-	utc_stop_hh=$(echo $utc_stop_time | awk -F: '{ print $1 }')
-	if [ "$zone" == "-" ]; then
-		ip_rule_west_zone $utc_start_hh $utc_stop_hh $local_start_hh $local_stop_hh $utc_start_time $utc_stop_time
-	else
-		ip_rule_east_zone $utc_start_hh $utc_stop_hh $local_start_hh $local_stop_hh $utc_start_time $utc_stop_time
-	fi
-
-	IP_RULE="$IP_RULE -j ACCEPT"
-	if [ -n "$IP_RULE1" ]; then
-		IP_RULE1="$IP_RULE1 -j ACCEPT"
-	fi
-
-	add_access_rule "$IP_RULE"
-	if [ -n "$IP_RULE1" ]; then
-		add_access_rule "$IP_RULE1"
-	fi
-
-	# for access rules to be effective for a schedule, need to add DROP rule
-	# to block the access outside the defined schedule
-	if [ "$schedule_added" == "0" ]; then
-		schedule_added="1"
-	fi
-}
-
-handle_access_control() {
-	local ac_section="$1"
-	local is_enabled
-
-	# default value of Hosts.AccessControl.{i}.Enable is false,
-	# so, if not defined in uci as 1, assume 0
-	config_get is_enabled "$ac_section" "enable" 0
-	if [ "$is_enabled" == "0" ]; then
-		return
-	fi
-
-	local mac_addr
-	config_get mac_addr "$ac_section" "macaddr"
-	if [ -z "$mac_addr" ]; then
-		return
-	else
-		ACCESS_RULE="-m mac --mac-source $mac_addr"
-	fi
-
-	local access_policy
-	config_get access_policy "$ac_section" "access_policy"
-	if [ -z "$access_policy" ]; then
-		return # since system default is allow so no need to do anything
-	fi
-
-	# As per Data Model, if access policy is deny, then schedule is to be ignored
-	# and no access is to be provided for the device
-	if [ "$access_policy" == "Deny" ]; then
-		ACCESS_RULE="$ACCESS_RULE -j DROP"
-		add_access_rule "$ACCESS_RULE"
-		return # no need to parse schedule
-	fi
-
-	schedule_added="0"
-	# check if schedule is defined for this access_control instance
-	# and if yes, create rule accordingly
-	config_foreach handle_schedule  ac_schedule "$ac_section"
-
-	# for access rule to work, need to have default drop rule as last rule
-	if [ "$schedule_added" == "1" ]; then
-		IP_RULE="$ACCESS_RULE -j DROP"
-		add_access_rule "$IP_RULE"
-	fi
-}
-
-ACL_FILE="/tmp/hosts_access_control/access_control.rules"
-
-rm -f $ACL_FILE
-
-mkdir -p /tmp/hosts_access_control/
-touch $ACL_FILE
-
-echo "iptables -w -F hosts_forward" >> $ACL_FILE
-echo "ip6tables -w -F hosts_forward" >> $ACL_FILE
-
-hosts_ipv4_forward=$(iptables -t filter --list -n | grep hosts_forward)
-if [ -z "$hosts_ipv4_forward" ]; then
-	echo "iptables -w -t filter -N hosts_forward" >> $ACL_FILE
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t filter -I FORWARD -j hosts_forward" >> $ACL_FILE
-fi
-
-hosts_ipv6_forward=$(ip6tables -t filter --list -n | grep hosts_forward)
-if [ -z "$hosts_ipv6_forward" ]; then
-	echo "ip6tables -w -t filter -N hosts_forward" >> $ACL_FILE
-	ret=$?
-	[ $ret -eq 0 ] && echo "ip6tables -w -t filter -I FORWARD -j hosts_forward" >> $ACL_FILE
-fi
-
-# Load /etc/config/hosts UCI file
-config_load hosts
-config_foreach handle_access_control access_control
-
-# apply the rules
-sh $ACL_FILE

icwmp/Config.in

@@ -1,6 +0,0 @@
-menu "Configuration"
-
-config ICWMP_MGMT_FROM_USP
-	bool "Support configuration of ManagementServer from USP"
-	default y
-endmenu

icwmp/Config_cwmp.in

@@ -0,0 +1,14 @@
+choice
+       prompt "Select ACS sever"
+       default CWMP_ACS_MULTI
+       depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "Select HDM as ACS server"
+endchoice

icwmp/Makefile

@@ -1,65 +1,93 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.8.6
+PKG_VERSION:=8.4.26.10
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=798dfcf2a206b2603d64e92a9ce8cc69dd481ced
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_VERSION:=ac7410a726a7269dcaef4c80061cab7a4447f6d1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-include ../bbfdm/bbfdm.mk
+PKG_FIXUP:=autoreconf
 
-define Package/icwmp
+include $(INCLUDE_DIR)/package.mk
+
+define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbfdm-api +libopenssl
-  MENU:=1
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
 endef
 
-define Package/icwmp/description
- TR069 client implementation with bbfdm backend for TR181 support
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -g \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+define Package/icwmp-openssl
+  $(Package/icwmp/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  VARIANT:=openssl
 endef
 
-define Package/icwmp/config
-	source "$(SOURCE)/Config.in"
+define Package/icwmp-wolfssl
+  $(Package/icwmp/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
+  CONFLICTS := icwmp-openssl
+  VARIANT:=wolfssl
 endef
 
-ifeq ($(CONFIG_ICWMP_MGMT_FROM_USP),y)
-EXTRA_CFLAGS += -DCWMP_DUAL_SUPPORT=BBFDM_BOTH
+define Package/icwmp-mbedtls
+  $(Package/icwmp/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
+  CONFLICTS := icwmp-openssl icwmp-wolfssl
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+ifeq ($(BUILD_VARIANT),openssl)
+CONFIGURE_ARGS += --enable-libopenssl
 endif
 
-ifeq ($(LOCAL_DEV),1)
+ifeq ($(BUILD_VARIANT),wolfssl)
+CONFIGURE_ARGS += --enable-libwolfssl
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CONFIGURE_ARGS += --enable-libmbedtls
+endif
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
 define Build/Prepare
-	$(CP) -rf ~/git/icwmp/* $(PKG_BUILD_DIR)/
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-define Package/icwmp/install
+define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
 	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
@@ -67,12 +95,17 @@ define Package/icwmp/install
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-set-random-inform-time $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libcwmpdm.so $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_PLUGIN) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1) $(PKG_NAME)
+	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
-$(eval $(call BuildPackage,icwmp))
+Package/icwmp-openssl/install = $(Package/icwmp/default/install)
+Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
+Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
+
+$(eval $(call BuildPackage,icwmp-openssl))
+$(eval $(call BuildPackage,icwmp-wolfssl))
+$(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,7 +1,8 @@
 {
-	"json_plugin_version": 2,
+	"json_plugin_version": 1,
 	"Device.CWMPManagementServer.": {
 		"type": "object",
+		"version": "2.15",
 		"protocols": [
 			"usp"
 		],
@@ -10,6 +11,7 @@
 		"dependency": "file:/etc/config/cwmp",
 		"EnableCWMP": {
 			"type": "boolean",
+			"version": "2.15",
 			"read": true,
 			"write": true,
 			"protocols": [

icwmp/files/etc/config/cwmp

@@ -5,14 +5,14 @@ config acs 'acs'
 	option periodic_inform_interval '1800'
 	option periodic_inform_time '0001-01-01T00:00:00Z'
 	option dhcp_discovery 'enable'
-	#option ssl_capath "/etc/icwmpd/ca.pem"
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
 	#­ possible configs interval :[1:65535]
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
-	option skip_dhcp_boot_options '0'
+	option ipv6_enable '0'
+	option ip_version '4'
 
 config cpe 'cpe'
 	option enable '1'
@@ -22,7 +22,7 @@ config cpe 'cpe'
 	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
-	option log_severity 'ERROR'
+	option log_severity 'INFO'
 	option log_file_name '/var/log/icwmpd.log'
 	option log_max_size '102400'
 	option userid '' #$OUI-$SER
@@ -32,18 +32,14 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
-	option disable_gatewayinfo '0'
-	option fw_upgrade_keep_settings '1'
-	option clock_sync_timeout '128'
 	
 config lwn 'lwn'
-	option enable '0'
+	option enable '1'
 	option hostname ''
 	option port '0'