bbfdm: add nonzero check for depcheck

2025-12-26 03:53:58 +08:00 · 2025-05-27 14:28:12 +05:30
290 changed files with 4588 additions and 8215 deletions
--- a/bbfdm/Makefile
+++ b/bbfdm/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=bbfdm
-PKG_VERSION:=1.18.18
+PKG_VERSION:=1.15.30

 USE_LOCAL:=0
 ifneq ($(USE_LOCAL),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=fbf01a9e30e7ecccc2453af7abfbccf939e27d43
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=6cbfa27973558c706f7bc88465a0dc234800a75f
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -55,7 +55,7 @@ define Package/dm-service
  CATEGORY:=Utilities
  SUBMENU:=TRx69
  TITLE:=Datamodel ubus backend to expose micro-service tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr +libeasy
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr
 endef

 define Package/bbf_configmngr
@@ -107,7 +107,7 @@ endif

 CMAKE_OPTIONS += \
 	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBFDMD_MAX_MSG_LEN:Integer=20971520 \
+	-DBBFDMD_MAX_MSG_LEN:Integer=10485760 \
 	-DCMAKE_BUILD_TYPE:String="Debug" \


@@ -183,7 +183,6 @@ define Package/bbf_configmngr/install

 	$(INSTALL_BIN) ./files/etc/init.d/bbf_configd $(1)/etc/init.d/bbf_configd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_config_notify.sh $(1)/usr/share/bbfdm/scripts/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_default_reload.sh $(1)/etc/bbfdm/
 	$(INSTALL_DATA) ./files/etc/bbfdm/critical_services.json $(1)/etc/bbfdm/
 endef

--- a/bbfdm/files/etc/bbfdm/critical_services.json
+++ b/bbfdm/files/etc/bbfdm/critical_services.json
@@ -1,47 +1,20 @@
 {
 	"usp": [
-			"/etc/config/firewall",
-			"/etc/bbfdm/dmmap/dmmap_firewall",
-			"/etc/config/network",
-			"/etc/bbfdm/dmmap/IP",
-			"/etc/bbfdm/dmmap/Ethernet",
-			"/etc/bbfdm/dmmap/GRE",
-			"/etc/bbfdm/dmmap/IPv6rd",
-			"/etc/bbfdm/dmmap/PPP",
-			"/etc/bbfdm/dmmap/Routing",
-			"/etc/config/dhcp",
-			"/etc/bbfdm/dmmap/DHCPv4",
-			"/etc/bbfdm/dmmap/DHCPv6",
-			"/etc/config/time",
-			"/etc/bbfdm/dmmap/dmmap_time",
-			"/etc/config/mapcontroller",
-			"/etc/config/wireless",
-			"/etc/bbfdm/dmmap/WiFi",
-			"/etc/config/ieee1905",
-			"/etc/config/mosquitto",
-			"/etc/config/nginx",
-			"/etc/config/netmode",
-			"/etc/bbfdm/dmmap/dmmap_netmode"
+			"firewall",
+			"network",
+			"dhcp",
+			"time",
+			"wireless",
+			"ieee1905",
+			"mapcontroller",
+			"mosquitto",
+			"nginx"
 	],
 	"cwmp": [
-			"/etc/config/firewall",
-			"/etc/bbfdm/dmmap/dmmap_firewall",
-			"/etc/config/network",
-			"/etc/bbfdm/dmmap/IP",
-			"/etc/bbfdm/dmmap/Ethernet",
-			"/etc/bbfdm/dmmap/GRE",
-			"/etc/bbfdm/dmmap/IPv6rd",
-			"/etc/bbfdm/dmmap/PPP",
-			"/etc/bbfdm/dmmap/Routing",
-			"/etc/config/dhcp",
-			"/etc/bbfdm/dmmap/DHCPv4",
-			"/etc/bbfdm/dmmap/DHCPv6",
-			"/etc/config/mapcontroller",
-			"/etc/config/wireless",
-			"/etc/bbfdm/dmmap/WiFi",
-			"/etc/config/time",
-			"/etc/bbfdm/dmmap/dmmap_time",
-			"/etc/config/netmode",
-			"/etc/bbfdm/dmmap/dmmap_netmode"
+			"firewall",
+			"network",
+			"dhcp",
+			"wireless",
+			"time"
 	]
 }
--- a/bbfdm/files/etc/init.d/bbf_configd
+++ b/bbfdm/files/etc/init.d/bbf_configd
@@ -10,10 +10,19 @@ log() {
 	echo "${@}"|logger -t bbf.config -p info
 }

+create_needed_directories()
+{
+	mkdir -p /tmp/bbfdm/.cwmp
+	mkdir -p /tmp/bbfdm/.usp
+	mkdir -p /tmp/bbfdm/.bbfdm
+}
+
 start_service()
 {
 	local log_level

+	create_needed_directories
+
 	config_load bbfdm
 	config_get log_level "reload_handler" log_level 2

@@ -27,6 +36,6 @@ start_service()
 service_triggers() {
 	for config_file in /etc/config/*; do
 		config_name=$(basename "$config_file")
-		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh "$config_name"
+		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh
 	done
 }
--- a/bbfdm/files/etc/ruleng/bbfdm.json
+++ b/bbfdm/files/etc/ruleng/bbfdm.json
@@ -15,13 +15,9 @@
 		]
 	},
 	"dhcp_refresh": {
-		"if_operator": "OR",
 		"if" : [
 			{
 				"event": "host"
-			},
-			{
-				"event": "wifi.dataelements.Associated"
 			}
 		],
 		"then" : [
--- a/bbk_cli/Makefile
+++ b/bbk_cli/Makefile
@@ -9,7 +9,7 @@ PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/dotse/bbk.git

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)

--- a/bootchart2/Makefile
+++ b/bootchart2/Makefile
@@ -15,7 +15,7 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/mmeeks/bootchart.git
 PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

 PKG_LICENSE:=GPLv2
--- a/bridgemngr/Config.in
+++ b/bridgemngr/Config.in
@@ -5,12 +5,6 @@ config BRIDGEMNGR_BRIDGE_VLAN
 	help
 	   Set this option to use bridge-vlan as backend for VLAN objects.

-config BRIDGEMNGR_COPY_PBITS
-	bool "Copy pbits from cvlan to svlan"
-	default y
-	help
-	   Set this option to copy cvlan pbits to svlan pbits by default (driver vlan).
-
 config BRIDGEMNGR_BRIDGE_VENDOR_EXT
 	bool "Use bridge BBF vendor extensions"
 	default y
--- a/bridgemngr/Makefile
+++ b/bridgemngr/Makefile
@@ -5,14 +5,15 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=bridgemngr
-PKG_VERSION:=1.1.6
+PKG_VERSION:=1.0.15

+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr.git
-PKG_SOURCE_VERSION:=882f8c8cc9a97372297d192cc916c4f8ffe7c25a
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
+PKG_SOURCE_VERSION:=124e2d1625717a8ef5a434b5a31bb4ce5dc98333
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -51,10 +52,6 @@ ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VLAN),y)
 	TARGET_CFLAGS += -DBRIDGE_VLAN_BACKEND
 endif

-ifeq ($(CONFIG_BRIDGEMNGR_COPY_PBITS),y)
-	TARGET_CFLAGS+=-DBRIDGEMNGR_COPY_PBITS
-endif
-
 define Package/bridgemngr/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/config
--- a/bulkdata/Makefile
+++ b/bulkdata/Makefile
@@ -7,14 +7,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.23
+PKG_VERSION:=2.1.20

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=f54550f2d587a701c0a8d5cac4a0910a99ce92cf
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=a5e57962938ca143ede65d92be90b6e9fce66e15
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/bulut/Makefile
+++ b/bulut/Makefile
@@ -11,7 +11,7 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
 PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
--- a/ddnsmngr/Makefile
+++ b/ddnsmngr/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.12
+PKG_VERSION:=1.0.11

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=44af9a7b3fec3929f8554af9633a5b8068189b48
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=9f2f4dabc71c4f405b1c5df576d20d793d299e94
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/decollector/Config.in
+++ b/decollector/Config.in
@@ -4,16 +4,4 @@ config DECOLLECTOR_EASYMESH_VERSION
 	int "Support Easymesh version"
 	default 6

-config DECOLLECTOR_BUILD_TR181_PLUGIN
-	bool "Build TR-181 mapping module (responsible for Device.WiFi.DataElements.)"
-	default y
-
-config DECOLLECTOR_VENDOR_EXTENSIONS
-	bool "Iopsys vendor extensions for Device.WiFi.DataElements."
-	default y
-
-config DECOLLECTOR_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-
 endmenu
--- a/decollector/Makefile
+++ b/decollector/Makefile
@@ -6,14 +6,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=decollector
-PKG_VERSION:=6.2.3.9
+PKG_VERSION:=6.2.1.5

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d1d948a48952fe2091e84af1293a6e77857439cf
+PKG_SOURCE_VERSION:=624082fe2763492b2360c8d035b2ae83e94970d0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -24,7 +24,6 @@ PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE

 include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk

 define Package/decollector
  SECTION:=utils
@@ -67,18 +66,6 @@ MAKE_PATH:=src

 TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)

-ifeq ($(CONFIG_DECOLLECTOR_BUILD_TR181_PLUGIN),y)
-MAKE_FLAGS += DECOLLECTOR_BUILD_TR181_PLUGIN=y
-ifeq ($(CONFIG_DECOLLECTOR_VENDOR_EXTENSIONS),y)
-TARGET_CFLAGS += -DDECOLLECTOR_VENDOR_EXTENSIONS
-ifeq ($(CONFIG_DECOLLECTOR_VENDOR_PREFIX),"")
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
-else
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_DECOLLECTOR_VENDOR_PREFIX)\\\"
-endif
-endif
-endif
-
 EXECS := \
 	$(if $(CONFIG_PACKAGE_decollector),decollector)

@@ -89,7 +76,6 @@ define Package/decollector/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
 endef

 $(eval $(call BuildPackage,decollector))
--- a/decollector/bbfdm_service.json
+++ b/decollector/bbfdm_service.json
@@ -1,26 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "decollector",
-    "unified_daemon": true,
-    "services": [
-      {
-        "parent_dm": "Device.WiFi.",
-        "object": "DataElements"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    },
-    "apply_handler": {
-      "uci": [
-        {
-          "file": [
-            "mapcontroller"
-          ],
-          "external_handler": "/etc/wifidmd/bbf_config_reload.sh"
-        }
-      ]
-    }
-  }
-}
--- a/dectmngr/Makefile
+++ b/dectmngr/Makefile
@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.7.13
+PKG_VERSION:=3.7.7

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5c2720563b3ed889e9d4de6fdb9b0f6a9d584094
+PKG_SOURCE_VERSION:=289a91b3e7f221f16c976efd147bd4b203420b41
 PKG_MIRROR_HASH:=skip
 endif

@@ -20,7 +20,7 @@ export BUILD_DIR

 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_BUILD_PARALLEL:=1

 include $(INCLUDE_DIR)/package.mk
--- a/dhcpmngr/Config.in
+++ b/dhcpmngr/Config.in
@@ -1,12 +0,0 @@
-if PACKAGE_dhcpmngr
-
-config DHCPMNGR_ENABLE_VENDOR_EXT
-	bool "Use datamodel vendor extensions"
-	default y
-	help
-	   Set this option to use bridge BBF vendor extensions.
-
-config DHCPMNGR_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-endif
--- a/dhcpmngr/Makefile
+++ b/dhcpmngr/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=dhcpmngr
-PKG_VERSION:=1.1.6
+PKG_VERSION:=1.0.6

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dhcpmngr.git
-PKG_SOURCE_VERSION:=74d96cd70119e4ea08767d68b45b4922162d0328
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=986f66608959f4f589009d580b046e250d8c620d
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -39,22 +39,6 @@ define Package/dhcpmngr/description
  Package to add Device.DHCPv4. and Device.DHCPv6. data model support.
 endef

-define Package/$(PKG_NAME)/config
-        source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(CONFIG_DHCPMNGR_ENABLE_VENDOR_EXT),y)
-MAKE_FLAGS += DHCPMNGR_ENABLE_VENDOR_EXT=y
-endif
-
-ifeq ($(CONFIG_DHCPMNGR_VENDOR_PREFIX),"")
-VENDOR_PREFIX = $(CONFIG_BBF_VENDOR_PREFIX)
-else
-VENDOR_PREFIX = $(CONFIG_DHCPMNGR_VENDOR_PREFIX)
-endif
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(VENDOR_PREFIX)\\\"
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
 	$(CP) -rf ~/git/dhcpmngr/* $(PKG_BUILD_DIR)/
--- a/dmcli-plugins/Makefile
+++ b/dmcli-plugins/Makefile
@@ -1,48 +0,0 @@
-#
-# Copyright (c) 2023 Genexis Netherlands B.V. All rights reserved.
-# This Software and its content are protected by the Dutch Copyright Act
-# ('Auteurswet'). All and any copying and distribution of the software
-# and its content without authorization by Genexis Netherlands B.V. is
-# prohibited. The prohibition includes every form of reproduction and
-# distribution.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dmcli-plugins
-PKG_LICENSE:=PROPRIETARY GENEXIS
-PKG_VERSION:=2.2.6
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/gnx/dmcli-plugin-easydm.git
-PKG_SOURCE_VERSION:=bc8b8527e8a41bdba73cb277a3c6c3b42b045153
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dmcli-plugins
-  SECTION:=tools
-  CATEGORY:=Genexis
-  TITLE:=Easy-to-use data model on top of TR181
-  URL:=http://genexis.eu
-  DEPENDS:=+dmcli
-endef
-
-define Package/dmcli-plugins/description
-  EasyDM offers a user-friendly approach to configuring TR-181
-  simplifying the process with its intuitive interface.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/dmcli-plugins/install
-	$(INSTALL_DIR) $(1)/usr/lib/dmcli/plugins
-	$(CP) $(PKG_BUILD_DIR)/src/*.js $(1)/usr/lib/dmcli/plugins/
-endef
-
-$(eval $(call BuildPackage,dmcli-plugins))
--- a/dmcli/Config.in
+++ b/dmcli/Config.in
@@ -1,9 +0,0 @@
-if PACKAGE_dmcli
-
-config DMCLI_REMOTE_CONNECTION
-        bool "Add dmcli remote controller configuration"
-        default n
-        help
-                This adds a usp controller configuration for dmcli remote connection from different machine/laptop/server.
-
-endif
--- a/dmcli/Makefile
+++ b/dmcli/Makefile
@@ -1,76 +0,0 @@
-#
-# Copyright (c) 2021 Genexis Netherlands B.V. All rights reserved.
-# This Software and its content are protected by the Dutch Copyright Act
-# ('Auteurswet'). All and any copying and distribution of the software
-# and its content without authorization by Genexis Netherlands B.V. is
-# prohibited. The prohibition includes every form of reproduction and
-# distribution.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dmcli
-PKG_LICENSE:=PROPRIETARY GENEXIS
-PKG_VERSION:=1.9.6
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/gnx/dmcli.git
-PKG_SOURCE_VERSION:=f03188eff6c2cab59e4c8f18a435c940ff5043f5
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dmcli
-  SECTION:=tools
-  CATEGORY:=Genexis
-  TITLE:=DMCLI (datamodel-based CLI)
-  URL:=http://genexis.eu
-  DEPENDS:=+usp-js +DMCLI_REMOTE_CONNECTION:mosquitto-auth-plugin +shadow-utils +@BUSYBOX_CONFIG_ADDUSER
-endef
-
-define Package/dmcli/description
-  CLI to view and configure datamodels of CPE
-endef
-
-define Package/dmcli/conffiles
-/etc/dmcli/dmcli.conf
-endef
-
-define Package/dmcli/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/dmcli/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dmcli $(1)/usr/bin/
-
-	$(INSTALL_DIR) $(1)/usr/lib/dmcli
-	$(CP) $(PKG_BUILD_DIR)/common $(1)/usr/lib/dmcli/
-	mv $(1)/usr/lib/dmcli/common/os_qjs.js $(1)/usr/lib/dmcli/common/os.js
-	rm $(1)/usr/lib/dmcli/common/os_node.js
-	$(CP) $(PKG_BUILD_DIR)/core $(1)/usr/lib/dmcli/
-	$(CP) $(PKG_BUILD_DIR)/cli $(1)/usr/lib/dmcli/
-	$(CP) $(PKG_BUILD_DIR)/data $(1)/usr/lib/dmcli/
-	$(CP) $(PKG_BUILD_DIR)/plugins $(1)/usr/lib/dmcli/
-
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DATA) ./files/etc/uci-defaults/36-dmcli $(1)/etc/uci-defaults/
-ifeq ($(CONFIG_DMCLI_REMOTE_CONNECTION),y)
-	$(INSTALL_DATA) ./files/etc/uci-defaults/36-dmcli-remote $(1)/etc/uci-defaults/
-else
-	$(INSTALL_DATA) ./files/etc/uci-defaults/36-dmcli-remote-remove $(1)/etc/uci-defaults/
-endif
-
-	$(INSTALL_DIR) $(1)/etc/dmcli
-	$(CP) ./files/etc/dmcli/dmcli.acl $(1)/etc/dmcli/
-	$(CP) ./files/etc/dmcli/dmcli.conf $(1)/etc/dmcli/
-
-	$(INSTALL_DIR) $(1)/etc/users/roles/
-	$(INSTALL_DATA) ./files/etc/users/roles/operator.json $(1)/etc/users/roles/
-endef
-
-$(eval $(call BuildPackage,dmcli))
--- a/dmcli/files/etc/dmcli/dmcli.acl
+++ b/dmcli/files/etc/dmcli/dmcli.acl
@@ -1,4 +0,0 @@
-user operator
-topic read /usp/operator/controller/reply-to
-topic read /usp/operator/controller
-topic write /usp/operator/endpoint
--- a/dmcli/files/etc/dmcli/dmcli.conf
+++ b/dmcli/files/etc/dmcli/dmcli.conf
@@ -1,45 +0,0 @@
-{
-   "Settings": {
-      "USP": {
-         "ActiveConnectionProfile": "local",
-         "ConnectionProfile": [
-            {
-               "Name": "local",
-               "Host": "127.0.0.1",
-               "Port": 9002,
-               "Username": "operator",
-               "Protocol": "ws",
-               "FromId": "oui:000F94:device-controller-operator",
-               "PublishEndpoint": "/usp/operator/endpoint",
-               "SubscribeEndpoint": "/usp/operator/controller"
-            }
-         ],
-         "Session": {
-            "AutoStart": false
-         },
-         "Notification": {
-            "LogTo": "console",
-            "Format": "brief",
-            "LogFile": "usp-notification.log"
-         }
-      },
-      "CLI": {
-         "Home": "/",
-         "Color": "true",
-         "Mode": "Command",
-         "ShowCommandTime": false,
-         "SortDMTree": false
-      },
-      "Prompt": {
-         "Auto": true,
-         "Color": "default",
-         "SelectedBackgroundColor": "yellow",
-         "PageSize": "3",
-         "AutoPromptOnEmptyCommand": false,
-         "AutoPromptInstanceNumbers": false
-      },
-      "Log": {
-         "Level": "Error"
-      }
-   }
-}
--- a/dmcli/files/etc/uci-defaults/36-dmcli
+++ b/dmcli/files/etc/uci-defaults/36-dmcli
@@ -1,120 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/iopsys-environment.sh
-. /usr/share/libubox/jshn.sh
-
-DMCLI_CONF="/etc/dmcli/dmcli.conf"
-CONTROLLER_ID='oui:000F94:device-controller-operator'
-DMCLI_RESP_TOPIC="/usp/operator/endpoint"
-DMCLI_CTRL_TOPIC="/usp/operator/controller"
-DMCLI_PORT="9002"
-
-grep -q "^operator:" /etc/passwd || {
-	adduser -g 'Operator' -D -H -s /usr/bin/dmcli --home '/usr/lib/dmcli' 'operator'
-	hash=""
-	if type get_operator_password_hash > /dev/null 2>&1; then
-		hash=$(get_operator_password_hash)
-	fi
-	if [ -z "$hash" ]; then
-		hash='$6$zP4Wk/VQJOLwwofC$teuhnYFQBcA8YUZo/Q0quDMi4SsOHmfBcyvt5VNchPnzgwF1nfNNliC3yBVW22NwmwttPEWeBEBfnMTBB0rYs/'
-	fi
-	echo "operator:${hash}" | chpasswd -e
-}
-
-grep -q "^/usr/bin/dmcli$" /etc/shells || {
-	echo '/usr/bin/dmcli' >> /etc/shells
-}
-
-uci -q del_list sshd.@sshd[0].AllowUsers='operator'
-uci -q add_list sshd.@sshd[0].AllowUsers='operator'
-
-uci -q delete users.operator
-uci -q set users.operator=user
-uci -q set users.operator.enabled=1
-uci -q set users.operator.shell='dmcli'
-uci -q set users.operator.member_roles='operator'
-
-if [ -f "/etc/config/mosquitto" ]; then
-	uci_add mosquitto listener dmcli_local
-	uci_set mosquitto dmcli_local enabled 1
-	uci_set mosquitto dmcli_local port "${DMCLI_PORT}"
-	uci_set mosquitto dmcli_local protocol 'websockets'
-	uci_set mosquitto dmcli_local acl_file '/etc/dmcli/dmcli.acl'
-	uci_set mosquitto dmcli_local no_remote_access '1'
-	uci_set mosquitto dmcli_local allow_anonymous '1'
-fi
-
-if [ -f "/etc/config/obuspa" ]; then
-	uci_add obuspa mqtt mqtt_operator
-	uci_set obuspa mqtt_operator BrokerAddress '127.0.0.1'
-	uci_set obuspa mqtt_operator BrokerPort '1883'
-	uci_set obuspa mqtt_operator TransportProtocol 'TCP/IP'
-
-	uci_add obuspa mtp mtp_operator
-	uci_set obuspa mtp_operator Protocol 'MQTT'
-	uci_set obuspa mtp_operator ResponseTopicConfigured "${DMCLI_RESP_TOPIC}"
-	uci_set obuspa mtp_operator mqtt 'mqtt_operator'
-
-	uci_add obuspa controller controller_operator
-	uci_set obuspa controller_operator EndpointID "${CONTROLLER_ID}"
-	uci_set obuspa controller_operator Protocol 'MQTT'
-	uci_set obuspa controller_operator Topic "${DMCLI_CTRL_TOPIC}"
-	uci_set obuspa controller_operator mqtt 'mqtt_operator'
-	uci_set obuspa controller_operator assigned_role_name 'operator'
-fi
-
-_get_endpoint_id() {
-	local id serial oui
-
-	id="$(uci -q get obuspa.localagent.EndpointID)"
-	if [ -n "${id}" ]; then
-		echo "${id}"
-		return 0
-	fi
-
-	serial="$(db -q get device.deviceinfo.SerialNumber)"
-	oui="$(db -q get device.deviceinfo.ManufacturerOUI)"
-
-	echo "os::${oui}-${serial//+/%2B}"
-}
-
-update_dmcli_conf() {
-	local endpointid confTmpFile
-	local port fromid publish subscribe toid
-
-	if [ -f "${DMCLI_CONF}" ]; then
-		endpointid="$(_get_endpoint_id)"
-		json_load_file "${DMCLI_CONF}" || return
-		json_select "Settings" || return
-			json_select "USP" || return
-				json_select "ConnectionProfile" || return
-					json_select "1" || return
-						json_get_var port "Port"
-						json_get_var fromid "FromId"
-						json_get_var publish "PublishEndpoint"
-						json_get_var subscribe "SubscribeEndpoint"
-						json_get_var toid "ToId"
-
-						json_add_int "Port" "${DMCLI_PORT}"
-						json_add_string "FromId" "${CONTROLLER_ID}"
-						json_add_string "PublishEndpoint" "${DMCLI_RESP_TOPIC}"
-						json_add_string "SubscribeEndpoint" "${DMCLI_CTRL_TOPIC}"
-						json_add_string "ToId" "${endpointid}"
-					json_select ..
-				json_select ..
-			json_select ..
-		json_select ..
-
-		if [ "${port}" != "${DMCLI_PORT}" ] || [ "${fromid}" != "${CONTROLLER_ID}" ] || \
-			[ "${publish}" != "${DMCLI_RESP_TOPIC}" ] || [ "${subscribe}" != "${DMCLI_CTRL_TOPIC}" ] || \
-			[ "${toid}" != "${endpointid}" ]; then
-			confTmpFile="$(mktemp -u -p "$(dirname "$DMCLI_CONF")" "$(basename "$DMCLI_CONF").XXXXXXX")"
-			json_pretty
-			json_dump > "${confTmpFile}" || return
-			mv -f "${confTmpFile}" "${DMCLI_CONF}" || return
-		fi
-	fi
-}
-
-update_dmcli_conf || exit
--- a/dmcli/files/etc/uci-defaults/36-dmcli-remote
+++ b/dmcli/files/etc/uci-defaults/36-dmcli-remote
@@ -1,14 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-if [ -f "/etc/config/mosquitto" ]; then
-	uci_add mosquitto listener dmcli
-	uci_set mosquitto dmcli enabled 1
-	uci_set mosquitto dmcli port '9003'
-	uci_set mosquitto dmcli protocol 'websockets'
-	uci_set mosquitto dmcli auth_plugin '/usr/lib/mosquitto_auth_plugin.so'
-	uci_set mosquitto dmcli acl_file '/etc/dmcli/dmcli.acl'
-fi
-
-exit 0
--- a/dmcli/files/etc/uci-defaults/36-dmcli-remote-remove
+++ b/dmcli/files/etc/uci-defaults/36-dmcli-remote-remove
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-if [ -f "/etc/config/mosquitto" ]; then
-	uci_remove mosquitto dmcli
-fi
-
-exit 0
--- a/dmcli/files/etc/users/roles/operator.json
+++ b/dmcli/files/etc/users/roles/operator.json
@@ -1,14 +0,0 @@
-{
-  "tr181": {
-    "name": "operator",
-    "instance": 6,
-    "permission": [
-      {
-        "object": "Device.",
-        "perm": [
-          "PERMIT_ALL"
-        ]
-      }
-    ]
-  }
-}
--- a/dmcli/src/Makefile
+++ b/dmcli/src/Makefile
@@ -1,7 +0,0 @@
-all: dmcli
-
-dmcli: main.c
-	$(CC) $(CFLAGS) -Wall -Werror -o $@ $^
-
-clean:
-	rm -f dmcli
--- a/dmcli/src/main.c
+++ b/dmcli/src/main.c
@@ -1,32 +0,0 @@
-/*
-* Copyright (c) 2021 Genexis Netherlands B.V. All rights reserved.
-* This Software and its content are protected by the Dutch Copyright Act
-* ('Auteurswet'). All and any copying and distribution of the software
-* and its content without authorization by Genexis Netherlands B.V. is
-* prohibited. The prohibition includes every form of reproduction and
-* distribution.
-*/
-
-#include <stdio.h>
-#include <string.h>
-#include <unistd.h>
-
-/* C Wrapper for operator to login to the CLI via ssh: the shell in
- * the passwd file cannot be a script that requires an interpreter. */
-int main(int argc, char *argv[])
-{
-	char *cmd[3 + (argc > 1 ? argc - 1 : 0)];
-
-	cmd[0] = "/usr/bin/qjs";
-	cmd[1] = "/usr/lib/dmcli/cli/main.js";
-	cmd[2] = NULL;
-
-	if (argc > 1) {
-		memcpy(&cmd[2], &argv[1], (argc - 1) * sizeof(char *));
-		cmd[2 + argc - 1] = NULL;
-	}
-
-	execv(cmd[0], cmd);
-	fprintf(stderr, "%s: command not found\n", cmd[0]);
-	return 127;
-}
--- a/dnsmngr/Makefile
+++ b/dnsmngr/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.21
+PKG_VERSION:=1.0.17

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=ef3714cc7555f763dfab626add8f90d7bc0a33b5
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=2ceb76e98cf23a8d52ab3f464d38d62385311a87
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/dslmngr/Makefile
+++ b/dslmngr/Makefile
@@ -8,14 +8,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.10
+PKG_VERSION:=1.2.9

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE_VERSION:=8fb4093b4d26b3cb06603e110d424005e33cf5d6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=5340cb31f759301f5aca3fd848fc3a63b0b4663f
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
 endif
@@ -30,8 +30,6 @@ include ../bbfdm/bbfdm.mk

 ifeq ($(CONFIG_TARGET_brcmbca),y)
  TARGET_PLATFORM=BROADCOM
-else ifneq ($(CONFIG_TARGET_airoha),)
-  TARGET_PLATFORM=AIROHA
 else
  $(info Unexpected CONFIG_TARGET)
 endif
@@ -43,7 +41,7 @@ define Package/dslmngr
  CATEGORY:=Utilities
  TITLE:=XDSL status and configration utility
  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +TARGET_airoha:br2684ctl
+  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
 endef

 define Package/dslmngr/description
@@ -77,10 +75,7 @@ define Package/dslmngr/install
 	$(CP) ./files/common/* $(1)/
 ifeq ($(CONFIG_TARGET_brcmbca),y)
 	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
 endif
-
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
--- a/dslmngr/files/airoha/etc/init.d/xdsl_wan
+++ b/dslmngr/files/airoha/etc/init.d/xdsl_wan
@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=99
-USE_PROCD=1
-
-start_service() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ -f /etc/board.json ] || return 0
-
-	if [ "$need_xdsl" != "" ]; then
-		procd_open_instance xdsl_wan
-		procd_set_param command /sbin/xdsl_wan
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-boot() {
-	: # boot-up is handled from 'hsm' application
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "dsl"
-}
--- a/dslmngr/files/airoha/lib/dsl/airoha.sh
+++ b/dslmngr/files/airoha/lib/dsl/airoha.sh
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-xtm_remove_devices() {
-	:
-}
-
-xtm_create_devices() {
-	:
-}
-
-xdsl_configure() {
-	# Support bridged WAN interface
-	ebtables --concurrent -t broute -D BROUTING -p 0xbeed -j DROP 2> /dev/null
-	ebtables --concurrent -t broute -I BROUTING -p 0xbeed -j DROP
-}
-
-xdsl_stop() {
-	return 0
-}
-
-xdsl_init() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ "$need_xdsl" = "" ] && exit 0
-
-	echo "Starting DSL"
-}
--- a/dslmngr/files/airoha/sbin/xdsl_wan
+++ b/dslmngr/files/airoha/sbin/xdsl_wan
@@ -1,270 +0,0 @@
-#!/bin/sh
-
-source "/lib/functions.sh"
-source "/lib/functions/network.sh"
-source "/lib/functions/system.sh"
-
-PREVLINK=""
-LINK=""
-LINKSPEED=""
-PREVWANMODE=""
-WANMODE=""
-CONFIGURED=0
-CINDEX=0
-WANPORT="$(jsonfilter -i /etc/board.json -e @.network.wan.device)"
-
-delete_atm_device() {
-	/userfs/bin/blapi_cmd xdsl atm_delete_interface $CINDEX
-	CINDEX=$((CINDEX+1))
-}
-
-delete_atm_devices() {
-	CINDEX=0
-	config_load dsl
-	config_foreach delete_atm_device atm-device
-}
-
-configure_atm_device() {
-	local vpi vci encapsulation qos_class pcr mbs scr
-	local encap qos ethmac
-
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr "0"
-	config_get mbs $1 mbs "0"
-	config_get scr $1 scr "0"
-
-	case $encapsulation in # llc, vcmux
-		vcmux)
-			encap="1483 Bridged IP VC-Mux"
-		;;
-		*)
-			encap="1483 Bridged IP LLC"
-		;;
-
-	esac
-
-	ethmac="$(echo -n "$(macaddr_add 02:AA:BB:01:23:40 $((CINDEX+2)))" | sed 's#:##g')"
-
-	/userfs/bin/blapi_cmd xdsl create_device $CINDEX ATM "" "$ethmac"
-	/userfs/bin/blapi_cmd xdsl atm_create_interface $CINDEX ATM "$qos_class" "$encap" "$vpi" "$vci" "$pcr" "$scr" "$mbs" 0
-
-	CINDEX=$((CINDEX+1))
-}
-
-create_atm_devices() {
-	delete_atm_devices
-
-	CINDEX=0
-	config_foreach configure_atm_device atm-device
-}
-
-configure_line() {
-	local mode profile bitswap sra us0 sesdrop sos roc ginp gvector mod prof
-	local adsl1_flag=0 issue2_flag=0 Glite_flag=0 adsl2_flag=0 adsl2p_flag=0 vdsl2_flag=0
-	local pro_8a_flag=0 pro_8b_flag=0 pro_8c_flag=0 pro_8d_flag=0 pro_12a_flag=0 pro_12b_flag=0 pro_17a_flag=0 pro_30a_flag=0 pro_35b_flag=0
-
-	config_get mode $1 mode "vdsl2"
-	config_get profile $1 profile "35b"
-	config_get bitswap $1 bitswap "1"
-	config_get sra $1 sra "1"
-	config_get us0 $1 us0 "1"
-	config_get sos $1 sos "0"
-	config_get roc $1 roc "0"
-	config_get ginp $1 ginp "1"
-	config_get gvector $1 gvector "1"
-
-	for mod in $mode; do
-		[ "$mod" = "gdmt" ] && adsl1_flag=1
-		[ "$mod" = "glite" ] && Glite_flag=1
-		[ "$mod" = "t1413" ] && issue2_flag=1
-		[ "$mod" = "adsl2" ] && adsl2_flag=1
-		[ "$mod" = "adsl2p" ] && adsl2p_flag=1
-		[ "$mod" = "vdsl2" ] && vdsl2_flag=1
-	done
-
-	for prof in $profile; do
-		[ "$prof" = "8a" ] && pro_8a_flag=1
-		[ "$prof" = "8b" ] && pro_8b_flag=1
-		[ "$prof" = "8c" ] && pro_8c_flag=1
-		[ "$prof" = "8d" ] && pro_8d_flag=1
-		[ "$prof" = "12a" ] && pro_12a_flag=1
-		[ "$prof" = "12b" ] && pro_12b_flag=1
-		[ "$prof" = "17a" ] && pro_17a_flag=1
-		[ "$prof" = "30a" ] && pro_30a_flag=1
-		[ "$prof" = "35b" ] && pro_35b_flag=1
-	done
-
-	/userfs/bin/blapi_cmd xdsl set_adsl_profile "$pro_8a_flag" "$pro_8b_flag" "$pro_8c_flag" "$pro_8d_flag" "$pro_12a_flag" "$pro_12b_flag" "$pro_17a_flag" "$pro_30a_flag" "$pro_35b_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_mode "$adsl1_flag" "$issue2_flag" "$Glite_flag" "$adsl2_flag" "$adsl2p_flag" "$vdsl2_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_gvector "$((!gvector))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_ginp "$((!ginp))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sos_roc "$((!sos))" "$((!roc))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_us0 "$((!us0))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sra "$((!sra))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_bitswap "$((!bitswap))"
-
-	CONFIGURED=1
-}
-
-configure_lines() {
-	config_load dsl
-	config_foreach configure_line dsl-line
-}
-
-call_wan_hotplug() {
-	# initializations
-	local updown="$1"
-	local ethwan="$2"
-
-	# ethernet hotlugs expect LINK and PORT environment variables set
-	env -i LINK="$updown" PORT="$ethwan" /sbin/hotplug-call ethernet
-}
-
-if [ "$WANPORT" = "ae_wan" -a -f /proc/device-tree/ae_wan/wan-dsl ]; then
-	/etc/init.d/br2684ctl stop
-else
-	/etc/init.d/br2684ctl start
-fi
-
-# Wait for nas0 interface to come up.
-while [ "$(devstatus "$WANPORT" | jsonfilter -e @.up)" != "true" ]; do
-	sleep 1
-done
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-	[ \( "$LINK" = "down" -o "$LINK" = "up" \) ] && break
-	sleep 1
-done
-sleep 2
-
-/userfs/bin/blapi_cmd xdsl set_adsl_sysvid "26 00 47 4E 58 53 00 00" # GNXS vendor id
-/userfs/bin/blapi_cmd xdsl set_adsl_version "$(ubus call fwbank dump | jsonfilter -e "@.bank[@.active=true].swver" | cut -f1 -d'_' | cut -f1 -d'-' | hexdump -e '11/1 "%02x " "\n"' | head -n1)"
-/userfs/bin/blapi_cmd xdsl set_power_up_down 1
-/userfs/bin/blapi_cmd xdsl set_power_up_down 0
-sleep 1
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-
-	if [ "$LINK" != "$PREVLINK" -a \( "$LINK" = "down" -o "$LINK" = "up" \) ]; then
-		if [ "$LINK" = "down" ]; then
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				rm -rf /tmp/qos/wan_link_shape_rate
-				rm -rf /tmp/qos/wan_link_speed
-				/usr/sbin/qos-uplink-bandwidth
-			fi
-
-			[ "$CONFIGURED" -eq 0 ] && configure_lines # Needs to be done once the slave SoC is in down state and we've not been able to auto-sync.
-			if [ -n "$WANMODE" ]; then
-				if [ "$WANMODE" = "PTM" ]; then
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 0 1
-				else
-					delete_atm_devices
-				fi
-			fi
-
-			call_wan_hotplug "down" "$WANPORT"
-		else
-			CONFIGURED=1
-			WANMODE="$(awk '/TPSTC type:/{print $4}' /proc/tc3162/adsl_stats)"
-			if [ "$WANMODE" != "$PREVWANMODE" ]; then
-				OLDWANPORT="$WANPORT"
-				network_defer_device "$OLDWANPORT"
-
-				if [ -f /proc/device-tree/ae_wan/wan-dsl ]; then
-					WANPORT="ae_wan"
-				else
-					WANPORT="nas10"
-				fi
-
-				if [ "$WANMODE" = "PTM" ]; then
-					/etc/init.d/br2684ctl stop
-					delete_atm_devices
-					/userfs/bin/blapi_cmd system set_wan_mode 1
-					/userfs/bin/blapi_cmd xdsl reload_ko 2
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 1 2
-
-					# Set extended TPID for PTM packet flow
-					sys memwl 1FB50000 81001839
-					# VLAN TPID - VLAN
-					sys memwl 1FB50F18 8100
-
-					ifconfig ${WANPORT} mtu 1500
-				else
-					/userfs/bin/blapi_cmd system set_wan_mode 0
-					/userfs/bin/blapi_cmd xdsl reload_ko 1
-					/etc/init.d/br2684ctl start
-
-					# Set extended TPID for ATM packet flow
-					sys memwl 1FB50000 884C1839
-					# VLAN TPID - MPOA
-					sys memwl 1FB50F18 884C
-
-					ifconfig ${WANPORT} mtu 1982
-					ifconfig ${WANPORT} down up
-
-					OLDWANPORT="$WANPORT"
-					ATMINDEX="$(cat /sys/class/atm/TSARM*/atmindex | tail -n1 2> /dev/null)"
-					WANPORT="nas$((ATMINDEX))"
-				fi
-
-				if [ "$OLDWANPORT" != "$WANPORT" ]; then
-					call_wan_hotplug "down" "$OLDWANPORT"
-
-					FILES="$(grep "$OLDWANPORT" /etc/config/* | cut -f1 -d: | uniq | cut -f4 -d/ | xargs)"
-					for FILE in $FILES; do
-						sed -i -e "s#${OLDWANPORT}#${WANPORT}#g" "/etc/config/${FILE}"
-						"/etc/init.d/${FILE}" restart
-					done
-				else
-					/etc/init.d/network restart
-				fi
-				ifconfig ${OLDWANPORT} down up
-			fi
-
-			if [ "$WANMODE" = "PTM" ]; then
-				: # ToDo
-			else
-				create_atm_devices
-			fi
-
-			call_wan_hotplug "up" "$WANPORT"
-			PREVWANMODE="$WANMODE"
-
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				LINKSPEED="$(awk '/far-end interleaved channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-				LINKSPEED=$((LINKSPEED))
-				if [ "$LINKSPEED" -eq 0 ]; then
-					LINKSPEED="$(awk '/far-end fast channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-					LINKSPEED=$((LINKSPEED))
-				fi
-
-				if [ "$LINKSPEED" -ne 0 ]; then
-					mkdir -p /tmp/qos
-					touch /tmp/qos/wan_link_shape_rate
-
-					/userfs/bin/qosrule discpline Rate uplink-bandwidth ${LINKSPEED}
-					hw_nat -! > /dev/null 2>&1
-				else
-					rm -rf /tmp/qos/wan_link_speed
-					/usr/sbin/qos-uplink-bandwidth
-				fi
-			fi
-		fi
-
-		# Toggle link state
-		network_defer_device "$WANPORT"
-		network_ready_device "$WANPORT"
-
-		# We are only interested in the transtion from init -> up/down and up/down -> down/up and vice versa.
-		# Since we poll the status via in-band signaling packets might get lost and the /procfs file is empty.
-		# This state we don't want to handle as it will toggle the link and do a re-setup which is totally unnecessary and unwanted.
-		PREVLINK="$LINK"
-	fi
-
-	sleep 5
-done
--- a/dslmngr/files/common/etc/config/dsl
+++ b/dslmngr/files/common/etc/config/dsl
@@ -25,7 +25,6 @@ config dsl-line line
 	list profile 12b
 	list profile 17a
 	list profile 30a
-	list profile 35b
 	option bitswap 1
 	option sra 1
 	option us0 1 # VDSL2 only
--- a/ebtables-extensions/Makefile
+++ b/ebtables-extensions/Makefile
@@ -14,7 +14,7 @@ ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ebtables-extensions.git
 PKG_SOURCE_VERSION:=7357622d806833d93d317164dc6673fbf5fd1629
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/ethmngr/Makefile
+++ b/ethmngr/Makefile
@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=ethmngr
-PKG_VERSION:=3.1.4
+PKG_VERSION:=3.0.7

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=0283fb5cb74a7baca46c4360da680757c57c86ac
+PKG_SOURCE_VERSION:=171cf63d972c6fa81b97281531e457a0967c16c7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
--- a/fatrace/Makefile
+++ b/fatrace/Makefile
@@ -16,7 +16,7 @@ PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://git.launchpad.net/fatrace

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

--- a/fdtextract/Makefile
+++ b/fdtextract/Makefile
@@ -10,15 +10,20 @@ PKG_NAME:=fdtextract
 PKG_RELEASE:=1
 PKG_VERSION:=1.0

-PKG_SOURCE_URL:=https://dev.iopsys.eu/system/fdtextract.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7917dbcb29724476cd46164eec29848df1e5fb67
+PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
 PKG_MIRROR_HASH:=skip

 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_BUILD_PARALLEL:=1

 include $(INCLUDE_DIR)/package.mk
@@ -35,7 +40,9 @@ endef

 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
+
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/fdtextract
 endef

 $(eval $(call BuildPackage,$(PKG_NAME)))
--- a/firewallmngr/Makefile
+++ b/firewallmngr/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=firewallmngr
-PKG_VERSION:=1.0.12
+PKG_VERSION:=1.0.9

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/firewallmngr.git
-PKG_SOURCE_VERSION:=30319c67fb4db285a2bcd272b1c10bc040eecf19
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=77ad8425b73a3ac63f6160dc217635394ac87907
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/firewallmngr/files/firewall.service
+++ b/firewallmngr/files/firewall.service
@@ -2,8 +2,6 @@

 . /lib/functions.sh

-ZONE_NAME_FILE="/tmp/service_fw_zone"
-
 log() {
 	echo "${@}"|logger -t firewall.service -p info
 }
@@ -19,37 +17,6 @@ exec_cmd() {
 	return 0
 }

-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_foreach collect_zone_name zone
-}
-
-get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
-}
-
 add_iptable_rule() {
 	chain_name=$1
 	protocol=$2
@@ -168,14 +135,9 @@ add_service() {
 	fi

 	action=$(echo "${target}" | tr a-z A-Z)
-	zone_name="$(get_firewall_zone ${interface})"
-	if [ -z "${zone_name}" ]; then
-		log "Rule can not be added without zone name for interface ${interface}"
-		return
-	fi
-
-	chain_name="zone_${zone_name}_input"
+	chain_name="zone_${interface}_input"
 	res=0
+
 	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)

 	if [ "${count}" -eq 0 ]; then
@@ -198,9 +160,4 @@ add_service() {
 }

 config_load firewall
-
-load_zone_names
-
 config_foreach add_service "service"
-
-rm -f "${ZONE_NAME_FILE}"
--- a/fluent-bit/Makefile
+++ b/fluent-bit/Makefile
@@ -5,16 +5,15 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=fluent-bit
-PKG_VERSION:=4.0.4
+PKG_VERSION:=4.0.2
 PKG_RELEASE:=$(AUTORELEASE)

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit.git
-PKG_SOURCE_VERSION=v$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION).tar.zst
-PKG_MIRROR_HASH:=skip
+PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL_FILE:=v$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit/archive/refs/tags/
+PKG_HASH:=aa0577ba7251081c8d5398b2a905b5b0585bb657ca13b39a5e12931437516f08
 endif

 PKG_LICENSE:=Apache-2.0
@@ -66,9 +65,9 @@ CMAKE_OPTIONS += \
 	-DFLB_IN_DISK=Yes \
 	-DFLB_IN_EXEC=Yes \
 	-DFLB_IN_HEAD=Yes \
-	-DFLB_IN_KMSG=Yes \
 	-DFLB_IN_TAIL=Yes \
 	-DFLB_IN_FORWARD=No \
+	-DFLB_IN_KMSG=No \
 	-DFLB_IN_PROC=No \
 	-DFLB_IN_RANDOM=No \
 	-DFLB_IN_SERIAL=No \
--- a/fluent-bit/files/fluent-bit.conf
+++ b/fluent-bit/files/fluent-bit.conf
@@ -9,10 +9,6 @@
    tag             syslog
    path            /dev/log

-[INPUT]
-    name            kmsg
-    tag             kernel
-
 [OUTPUT]
    name            null
    match           *
--- a/fluent-bit/patches/0002-add_hostname_to_log_dump.patch
+++ b/fluent-bit/patches/0002-add_hostname_to_log_dump.patch
@@ -0,0 +1,45 @@
+diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
+index 2e47c9666..95d28e438 100644
+--- a/plugins/out_file/file.c
+++ b/plugins/out_file/file.c
+@@ -27,6 +27,7 @@
+ #include <msgpack.h>
+ 
+ #include <stdio.h>
+#include <unistd.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <fcntl.h>
+@@ -55,6 +56,7 @@ struct flb_file_conf {
+     int csv_column_names;
+     int mkdir;
+     struct flb_output_instance *ins;
+    char hostname[256];
+ };
+ 
+ static char *check_delimiter(const char *str)
+@@ -141,6 +143,9 @@ static int cb_file_init(struct flb_output_instance *ins,
+         }
+     }
+ 
+    if (gethostname(ctx->hostname, sizeof(ctx->hostname)) != 0)
+	    snprintf(ctx->hostname, sizeof(ctx->hostname), "%s", "localhost");
+
+     tmp = flb_output_get_property("delimiter", ins);
+     ret_str = check_delimiter(tmp);
+     if (ret_str != NULL) {
+@@ -233,12 +238,8 @@ static int template_output_write(struct flb_file_conf *ctx,
+     int i;
+     msgpack_object_kv *kv;
+ 
+-    /*
+-     * Right now we treat "{time}" specially and fill the placeholder
+-     * with the metadata timestamp (formatted as float).
+-     */
+-    if (!strncmp(key, "time", size)) {
+-        fprintf(fp, "%f", flb_time_to_double(tm));
+    if (!strncmp(key, "hostname", size)) {
+        fprintf(fp, "%s", ctx->hostname);
+         return 0;
+     }
+ 
--- a/fluent-bit/patches/0002-file_out_time.patch
+++ b/fluent-bit/patches/0002-file_out_time.patch
@@ -1,27 +0,0 @@
-diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
-index 77baf6be8..04c519d5a 100644
--- a/plugins/out_file/file.c
-+++ b/plugins/out_file/file.c
-@@ -238,10 +238,20 @@ static int template_output_write(struct flb_file_conf *ctx,
- 
-     /*
-      * Right now we treat "{time}" specially and fill the placeholder
-     * with the metadata timestamp (formatted as float).
-+     * with the metadata timestamp.
-      */
-     if (!strncmp(key, "time", size)) {
-        fprintf(fp, "%f", flb_time_to_double(tm));
-+        struct tm tm_local;
-+        char buf[32];
-+        if (localtime_r(&tm->tm.tv_sec, &tm_local) == NULL) {
-+            flb_plg_error(ctx->ins, "localtime_r failed");
-+            return -1;
-+        }
-+        if (strftime(buf, sizeof(buf), "%b %d %H:%M:%S", &tm_local) == 0) {
-+            flb_plg_error(ctx->ins, "strftime failed");
-+            return -1;
-+        }
-+        fputs(buf, fp);
-         return 0;
-     }
- 
--- a/fluent-bit/patches/0003-prepend_length_in_syslog_output.patch
+++ b/fluent-bit/patches/0003-prepend_length_in_syslog_output.patch
@@ -1,47 +0,0 @@
-diff --git a/plugins/out_syslog/syslog.c b/plugins/out_syslog/syslog.c
-index 4ecc7c4ac..cfe568245 100644
--- a/plugins/out_syslog/syslog.c
-+++ b/plugins/out_syslog/syslog.c
-@@ -776,12 +776,42 @@ static flb_sds_t syslog_format(struct flb_syslog *ctx, msgpack_object *o,
-         }
- 
-         if (ctx->parsed_mode != FLB_SYSLOG_UDP) {
-+            unsigned int msg_len = 0;
-+
-+            /* Create new SDS for length prefix */
-+            flb_sds_t prefix = flb_sds_create_size(ctx->maxsize + 32);
-+            if (!prefix) {
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            /* Add newline also to make behaviour similar to syslog-ng */
-             tmp = flb_sds_cat(*s, "\n", 1);
-             if (!tmp) {
-+                flb_sds_destroy(prefix);
-                 ret_sds = NULL;
-                 goto clean;
-             }
-             *s = tmp;
-+
-+            msg_len = flb_sds_len(*s);
-+            tmp = flb_sds_printf(&prefix, "%u ", msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+            prefix = tmp;
-+
-+            tmp = flb_sds_cat(prefix, *s, msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            flb_sds_destroy(*s);
-+            *s = tmp;
-         }
-     }
-     else {
--- a/fluent-bit/patches/0020-fix_kmsg.patch
+++ b/fluent-bit/patches/0020-fix_kmsg.patch
@@ -1,73 +0,0 @@
-diff --git a/plugins/in_kmsg/in_kmsg.c b/plugins/in_kmsg/in_kmsg.c
-index cd5c4cd17..15f105451 100644
--- a/plugins/in_kmsg/in_kmsg.c
-+++ b/plugins/in_kmsg/in_kmsg.c
-@@ -36,7 +36,6 @@
- #include <sys/stat.h>
- #include <sys/time.h>
- #include <inttypes.h>
-#include <time.h>
- 
- #include "in_kmsg.h"
- 
-@@ -123,12 +122,17 @@ static inline int process_line(const char *line,
-     ctx->buffer_id++;
- 
-     errno = 0;
-    val = strtol(p, &end, 10);
-    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoul(p, &end, 10);
-+    if ((errno == ERANGE && val == ULONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* ensure something was consumed */
-+    if (end == p) {
-+        goto fail;
-+    }
-+
-     /* Priority */
-     priority = FLB_KLOG_PRI(val);
- 
-@@ -144,24 +148,35 @@ static inline int process_line(const char *line,
-     }
-     p++;
- 
-    val = strtoul(p, &end, 10);
-    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoull(p, &end, 10);
-+    if ((errno == ERANGE && val == ULLONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* make sure strtoull consumed something */
-+    /* after the sequence number, the next char must be ',' */
-+    if (end == p || *end != ',') {
-+        goto fail;
-+    }
-+
-     sequence = val;
-     p = ++end;
- 
-     /* Timestamp */
-    val = strtoul(p, &end, 10);
-    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoull(p, &end, 10);
-+    if ((errno == ERANGE && val == ULLONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* ensure something was consumed */
-+    if (end == p) {
-+        goto fail;
-+    }
-+
-     tv.tv_sec  = val/1000000;
-    tv.tv_usec = val - (tv.tv_sec * 1000000);
-+    tv.tv_usec = val - ((uint64_t)tv.tv_sec * 1000000);
- 
-     flb_time_set(&ts, ctx->boot_time.tv_sec + tv.tv_sec, tv.tv_usec * 1000);
- 
--- a/gateway-info/Makefile
+++ b/gateway-info/Makefile
@@ -15,7 +15,7 @@ ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/gateway-info.git
 PKG_SOURCE_VERSION:=dd15893a8291e556a8c49ff9e143c763db0379b5
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/gateway-info/files/etc/uci-defaults/86-set-gateway-device-info
+++ b/gateway-info/files/etc/uci-defaults/86-set-gateway-device-info
@@ -110,7 +110,7 @@ configure_send_op125() {


 	if [ "${uci}" = "network" ]; then
-		[ -n "${sendopt}" ] && new_send_opt="$sendopt $opt125" || new_send_opt="$opt125"
+		new_send_opt="$sendopt $opt125"
 		uci -q set network."${intf}".sendopts="$new_send_opt"
 	else
 		new_send_opt="$sendopt$opt125"
@@ -228,7 +228,7 @@ enable_dhcp_option125() {

 	if [ "${proto}" = "dhcp" ]; then
 		if [ ${req125_present} -eq 0 ]; then
-			[ -n "${reqopts}" ] && newreqopts="$reqopts 125" || newreqopts="125"
+			newreqopts="$reqopts 125"
 			uci -q set network."${wan}".reqopts="$newreqopts"
 		fi

--- a/gateway-info/files/etc/udhcpc.user.d/udhcpc_gateway_info.user
+++ b/gateway-info/files/etc/udhcpc.user.d/udhcpc_gateway_info.user
@@ -40,22 +40,22 @@ get_vivsoi() {

 	#hex-string 2 character=1 Byte
 	# length in hex string will be twice of actual Byte length
-	[ "${len}" -gt 8 ] || return
+	[ "$len" -gt "8" ] || return

 	data="${opt125}"
 	rem_len="${len}"
-	while [ "${rem_len}" -gt 0 ]; do
+	while [ $rem_len -gt 0 ]; do
 		ent_id=${data:0:8}
 		ent_id=$(printf "%d\n" "0x$ent_id")

-		if [ "${ent_id}" -ne  3561 ]; then
+		if [ $ent_id -ne  3561 ]; then
 			len_val=${data:8:2}
 			data_len=$(printf "%d\n" "0x$len_val")
 			# add 4 byte for ent_id and 1 byte for len
 			data_len=$(( data_len * 2 + 10 ))
 			# move ahead data to next enterprise id
 			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - data_len ))
+			rem_len=$(( rem_len - $data_len ))
 			continue
 		fi

@@ -66,7 +66,7 @@ get_vivsoi() {
 		data_len=$(( data_len * 2 + 10 ))

 		opt_len=$(printf "%d\n" "0x$len_val")
-		[ "${opt_len}" -eq 0 ] && return
+		[ $opt_len -eq 0 ] && return

 		# populate the option data of enterprise id
 		sub_data_len=$(( opt_len * 2))
@@ -74,7 +74,7 @@ get_vivsoi() {
 		sub_data=${data:10:"${sub_data_len}"}

 		# parsing of suboption of option 125
-		while [ "${sub_data_len}" -gt 0 ]; do
+		while [ $sub_data_len -gt 0 ]; do
 			# get the suboption id
 			sub_opt_id=${sub_data:0:2}
 			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
@@ -85,20 +85,20 @@ get_vivsoi() {
 			sub_opt_len=$(( sub_opt_len * 2 ))

 			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:"${sub_opt_len}"}
+			sub_opt_val=${sub_data:4:${sub_opt_len}}

 			# assign the value found in sub option
 			case "${sub_opt_id}" in
 				"4")
-				OUI=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				OUI=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 				"5")
-				SERIAL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				SERIAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 				"6")
-				CLASS=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				CLASS=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 			esac
@@ -110,7 +110,7 @@ get_vivsoi() {
 			sub_data_len=$((sub_data_len - sub_opt_end))

 			# fetch next sub option hex string
-			sub_data=${sub_data:"${sub_opt_end}":"${sub_data_len}"}
+			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
 		done

 		# move ahead data to next enterprise id
@@ -131,13 +131,15 @@ send_host_query() {
 		sleep 5

 		json_load "$(ubus call umdns browse)"
-		if ! json_select discovered_services; then
+		json_select discovered_services
+		if [ "${?}" -ne 0 ]; then
 			json_cleanup
 			loop=$(( loop - 1 ))
 			continue
 		fi

-		if ! json_select _usp-agt-mqtt._tcp; then
+		json_select _usp-agt-mqtt._tcp
+		if [ "${?}" -ne 0 ]; then
 			json_cleanup
 			loop=$(( loop - 1 ))
 			continue
@@ -154,7 +156,7 @@ send_host_query() {

 	json_get_keys keys
 	for key in $keys; do
-		json_select "${key}"
+		json_select $key
 		json_get_var _host host ""

 		if [ -z "${_host}" ] || [[ "${sent_host}" =~ " ${_host}" ]]; then
@@ -164,10 +166,9 @@ send_host_query() {

 		sent_host="${sent_host} ${_host}"
 		cmd="ubus call umdns query '{\"question\":\"$_host\",\"interface\":\"$intf\"}'"
-		sh -c "${cmd}"
+		eval $cmd
 		resp=0
 		json_select ..
-		sleep 2 # umdns query sometime takes time to resolve so adding some sleep
 	done

 	json_cleanup
@@ -184,29 +185,32 @@ get_usp_agent_id() {
 	fi

 	json_load "$(ubus call umdns browse)"
-	if ! json_select discovered_services; then
+	json_select discovered_services
+	if [ "${?}" -ne 0 ]; then
 		json_cleanup
-		echo "${ID}"
+		echo ${ID}
 		return 0
 	fi

-	if ! json_select _usp-agt-mqtt._tcp; then
+	json_select _usp-agt-mqtt._tcp
+	if [ "${?}" -ne 0 ]; then
 		json_cleanup
-		echo "${ID}"
+		echo ${ID}
 		return 0
 	fi

 	json_get_keys keys
 	for key in $keys; do
-		json_select "${key}"
-		if ! json_select "${family}"; then
+		json_select $key
+		json_select $family
+		if [ "${?}" -ne 0 ]; then
 			json_select ..
 			continue
 		fi

 		json_get_keys ips
 		for ip in $ips; do
-			json_get_var ip_val "${ip}"
+			json_get_var ip_val $ip
 			if [ "${ip_val}" != "${dhcp_ip}" ]; then
 				continue
 			fi
@@ -215,8 +219,8 @@ get_usp_agent_id() {
 			json_select txt
 			json_get_keys txts
 			for _txt in $txts; do
-				json_get_var text_val "${_txt}"
-				if [[ "${text_val:0:3}" = "ID=" ]]; then
+				json_get_var text_val $_txt
+				if [[ "${text_val:0:3}" == "ID=" ]]; then
 					ID="${text_val:3}"
 					break
 				fi
@@ -234,16 +238,16 @@ get_usp_agent_id() {
 	done

 	json_cleanup
-	echo "${ID}"
+	echo ${ID}
 }

 get_mac_address() {
 	ip="${1}"
 	device="${2}"

-	mac=$(grep "${ip}" /proc/net/arp | awk '{print $4}')
+	mac="$(cat /proc/net/arp | grep $ip | awk '{print $4}')"
 	if [ -z "${mac}" ]; then
-		arp_resp=$(arping -b -f -c 5 -I "${device}" "${ip}" | grep 'Unicast reply from' | awk '{print $5}')
+		arp_resp="$(arping -b -f -c 5 -I $device $ip | grep 'Unicast reply from' | awk '{print $5}')"
 		if [ -n "${arp_resp}" ]; then
 			mac=${arp_resp:1:-1}
 		fi
@@ -256,7 +260,7 @@ send_unknown_gw_event() {
 	mac="${1}"

 	cmd="ubus -t 5 send gateway-info.gateway.unknown '{\"hwaddr\":\"$mac\"}'"
-	sh -c "${cmd}"
+	eval $cmd
 }

 send_cwmp_gw_event() {
@@ -265,14 +269,14 @@ send_cwmp_gw_event() {
 	serial="${3}"

 	cmd="ubus -t 5 send gateway-info.gateway.cwmp '{\"oui\":\"$oui\",\"class\":\"$class\",\"serial\":\"$serial\"}'"
-	sh -c "${cmd}"
+	eval $cmd
 }

 send_usp_gw_event() {
 	endpoint="${1}"

 	cmd="ubus -t 5 send gateway-info.gateway.usp '{\"endpoint\":\"$endpoint\"}'"
-	sh -c "${cmd}"
+	eval $cmd
 }

 config_load gateway
@@ -283,13 +287,13 @@ if [ "${enable}" -eq 0 ]; then
 	return 0
 fi

-if [ "${wan_intf}" = "${INTERFACE}" ]; then
-	if [ "${1}" = "deconfig" ]; then
+if [ "${wan_intf}" == "${INTERFACE}" ]; then
+	if [ "${1}" == "deconfig" ]; then
 		rm -rf /var/state/gwinfo
 		return 0
 	fi

-	json_load "$(ifstatus "${INTERFACE}")"
+	json_load "$(ifstatus ${INTERFACE})"
 	json_get_var dev_name device ""
 	json_select data
 	json_get_var dhcp_ip dhcpserver ""
@@ -299,7 +303,7 @@ if [ "${wan_intf}" = "${INTERFACE}" ]; then
 		return 0
 	fi

-	MAC=$(get_mac_address "${dhcp_ip}" "${dev_name}")
+	MAC="$(get_mac_address $dhcp_ip $dev_name)"

 	mkdir -p /var/state
 	touch /var/state/gwinfo
@@ -322,8 +326,8 @@ if [ "${wan_intf}" = "${INTERFACE}" ]; then
 		return 0
 	fi

-	len=$(echo -n "${opt125}" | wc -c)
-	get_vivsoi "${opt125}" "${len}"
+	len=$(printf "$opt125"|wc -c)
+	get_vivsoi "$opt125" "$len"

 	if [ "${GW_DISCOVERED}" -eq 0 ]; then
 		send_unknown_gw_event "${MAC}"
@@ -337,18 +341,19 @@ if [ "${wan_intf}" = "${INTERFACE}" ]; then
 	uci -q -c /var/state commit gwinfo

 	# Check for USP parameters
-	if ! ubus -t 15 wait_for umdns; then
+	ubus -t 15 wait_for umdns
+	if [ "${?}" -ne 0 ]; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0
 	fi

-	resp=$(send_host_query "${dev_name}")
+	resp=$(send_host_query $dev_name)
 	if [ "${resp}" -ne 0 ]; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0
 	fi

-	ID=$(get_usp_agent_id "${dhcp_ip}")
+	ID="$(get_usp_agent_id $dhcp_ip)"
 	if [ -z "${ID}" ]; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0
--- a/hostmngr/Makefile
+++ b/hostmngr/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=hostmngr
-PKG_VERSION:=1.4.3
+PKG_VERSION:=1.2.20

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=667866b8149d3df83a05536319eac02aee0b6d75
+PKG_SOURCE_VERSION:=3948618fa8fa23a0ddc51632b0036dbd08e27696
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
--- a/icwmp/Config.in
+++ b/icwmp/Config.in
@@ -19,8 +19,4 @@ config ICWMP_VENDOR_PREFIX
 config ICWMP_ENABLE_SMM_SUPPORT
 	bool "Enable software module management support"
 	default n
-
-config ICWMP_ENABLE_ANNEX_F_INFORM_PARAM
-	bool "Enable Device.Gateway. and Device.ManagementServer.ManageableDevice. as inform parameter"
-	default y
 endmenu
--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -8,14 +8,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=9.10.12
+PKG_VERSION:=9.9.6

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=fc34f19ec5ab691b3d815a0d1d917903d310db75
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=5dba542b280495730176da468bc45ed5dcc8c94e
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -84,15 +84,10 @@ define Package/icwmp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) ./files/etc/uci-defaults/50-cwmp-align-keep-config $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/95-set-random-inform-time $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-migrate-gw-info $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/999-cwmp-conn-config $(1)/etc/uci-defaults/
-ifeq ($(CONFIG_ICWMP_ENABLE_ANNEX_F_INFORM_PARAM),y)
-	$(INSTALL_BIN) ./files/etc/uci-defaults/999-cwmp-annex-f-config $(1)/etc/uci-defaults/
-endif
 	$(INSTALL_BIN) ./files/etc/icwmpd/vendor_log.sh $(1)/etc/icwmpd/vendor_log.sh
 	$(INSTALL_BIN) ./files/etc/icwmpd/firewall.cwmp $(1)/etc/icwmpd/firewall.cwmp
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
--- a/icwmp/files/etc/config/cwmp
+++ b/icwmp/files/etc/config/cwmp
@@ -28,9 +28,9 @@ config cpe 'cpe'
 	option log_severity 'WARNING'
 	option log_file_name '/var/log/icwmpd.log'
 	option log_max_size '102400'
-	option bind_retries '5'
 	option userid '' #$OUI-$SER
 	option passwd ''
+	option port '7547'
 	option provisioning_code ''
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
@@ -42,9 +42,7 @@ config cpe 'cpe'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
 	option active_notif_throttle '0'
-	#option KeepConfig '1'
-	#option KeepOpConf '1'
-	#option ConfigScope 'UserOnly'
+	option fw_upgrade_keep_settings '1'
 	option clock_sync_timeout '128'
 	option disable_datatype_check '0'
 	#list allowed_cr_ip '10.5.1.0/24'
--- a/icwmp/files/etc/icwmpd/firewall.cwmp
+++ b/icwmp/files/etc/icwmpd/firewall.cwmp
@@ -1,44 +1,14 @@
 #!/bin/sh

-. /lib/functions.sh
-
-ZONE_NAME_FILE="/tmp/cwmp_fw_zone"
-
 #created by the icwmp package
 log() {
 	echo "${@}"|logger -t firewall.cwmp -p info
 }

-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_load firewall
-	config_foreach collect_zone_name zone
-}
-
 get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
+	zone="$(uci show firewall|grep network|grep -w "${1}"|cut -d. -f 2)"
+	zone="${zone:-wan}" # defaults to wan zone
+	echo "$zone"
 }

 cleanup_upstream_rules() {
@@ -133,56 +103,9 @@ add_firewall_rule() {
 	fi
 }

-remove_port_protection() {
-	local enabled chain rule rule_num
-
-	config_get enabled "${1}" "${2}"
-
-	if [ "${enabled}" -eq 1 ]; then
-		config_get zonename "$1" name
-		[ -n "$zonename" ] || return 0
-
-		chain='prerouting_'$zonename'_rule'
-
-		while rule=$(iptables -w -t nat -nL "$chain" --line-numbers | grep -m 1 -w CWMP_Port_protection); do
-			rule_num=${rule%%[$' \t']*}
-			iptables -w -t nat -D "$chain" "$rule_num"
-		done
-	fi
-}
-
-cleanup_port_protection() {
-	config_load firewall
-	config_foreach remove_port_protection zone masq
-}
-
-install_port_protection() {
-	local PORT="${3}"
-	local enabled zonename chain
-
-	config_get enabled "${1}" "${2}"
-
-	if [ "${enabled}" -eq 1 ]; then
-		config_get zonename "${1}" name
-		[ -n "$zonename" ] || return 0
-
-		chain='prerouting_'$zonename'_rule'
-
-		iptables -w -t nat -I "$chain" -p tcp --dport "$PORT" -j ACCEPT -m comment --comment=CWMP_Port_protection
-		iptables -w -t nat -I "$chain" -p udp --dport "$PORT" -j ACCEPT -m comment --comment=CWMP_Port_protection
-	fi
-}
-
-add_port_protection() {
-	config_load firewall
-	config_foreach install_port_protection zone masq "${1}"
-}
-
 configure_connection_req_rules() {
 	app="${1}"

-	cleanup_port_protection
-
 	wan="$(uci -q get cwmp.cpe.default_wan_interface)"
 	wan="${wan:-wan}"

@@ -222,11 +145,8 @@ configure_connection_req_rules() {
 		fi
 	fi

-	port=$(uci -q -c /var/state get icwmp.cpe.port)
-	if [ -z "${port}" ]; then
-		log "cwmp cpe port not configured"
-		exit 0
-	fi
+	port=$(uci -q get cwmp.cpe.port)
+	port="${port:-7547}"

 	ipaddr=$(uci -q get cwmp.cpe.allowed_cr_ip)
 	if [ -n "${ipaddr}" ]; then
@@ -247,10 +167,6 @@ configure_connection_req_rules() {
 		# Close the ACS port at Lan side
 		close_downstream_acs_port "${lan}" "${port}"
 	fi
-
-	add_port_protection "${port}"
 }

-load_zone_names
 configure_connection_req_rules "$@"
-rm -f "${ZONE_NAME_FILE}"
--- a/icwmp/files/etc/init.d/icwmpd
+++ b/icwmp/files/etc/init.d/icwmpd
@@ -16,6 +16,79 @@ log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }

+regenerate_ssl_link() {
+	local cert_dir
+
+	cert_dir="${1%/}"
+	if [ -f "${cert_dir}" ]; then
+		return 0
+	fi
+
+	# do not generate the c_rehash if its system default cert path
+	# ca-certificate package already generates c_rehash on compilation
+	[ ! -d "${cert_dir}" ] || [ "${cert_dir}" = "/etc/ssl/certs" ] && return 0
+
+	generate_links() {
+		local file_type="$1"
+		local files="${cert_dir}"/*."${file_type}"
+		for cfile in ${files}; do
+			if [ -f "${cfile}" ]; then
+				rehash="$(openssl x509 -hash -noout -in "${cfile}")"
+				if [ ! -f "${cert_dir}/${rehash}.0" ]; then
+					log "Generating c_rehash for ${cfile}=>${rehash}.0"
+					ln -s "${cfile}" "${cert_dir}/${rehash}.0"
+				fi
+			fi
+		done
+	}
+
+	generate_links "pem"
+}
+
+enable_dhcp_option43() {
+	local wan="${1}"
+
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local reqopts="$(uci -q get network."${wan}".reqopts)"
+	local proto="$(uci -q get network."${wan}".proto)"
+	local newreqopts=""
+	local option43_present=0
+
+	for ropt in $reqopts; do
+		case $ropt in
+			43) option43_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	if [ ${option43_present} -eq 1 ]; then
+		return;
+	fi
+
+	newreqopts="$reqopts 43"
+	if [ "${proto}" = "dhcp" ]; then
+		uci -q set network."${wan}".reqopts="$newreqopts"
+		uci commit network
+		ubus call network reload
+	fi
+}
+
+set_vendor_id() {
+	local wan="${1}"
+	local proto="$(uci -q get network."${wan}".proto)"
+
+	if [ "${proto}" = "dhcp" ]; then
+		vendorid="$(uci -q get network."${wan}".vendorid)"
+		if [ -z "${vendorid}" ]; then
+			uci -q set network."${wan}".vendorid="dslforum.org"
+			ubus call uci commit '{"config":"network"}'
+		elif [[ $vendorid != *"dslforum.org"* ]]; then
+			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
+			ubus call uci commit '{"config":"network"}'
+		fi
+	fi
+}
+
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -97,9 +170,7 @@ validate_cpe_section()
 		'periodic_notify_enable:bool' \
 		'enable:bool:1' \
 		'periodic_notify_interval:uinteger' \
-		'KeepConfig:bool' \
-		'KeepOpConf:bool' \
-		'ConfigScope:string'
+		'fw_upgrade_keep_settings:bool'
 }

 validate_defaults() {
@@ -140,6 +211,28 @@ validate_defaults() {
 }

 boot() {
+	local dhcp_discovery wan_interface skip_dhcp_boot_options
+
+	config_load cwmp
+	config_get wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get skip_dhcp_boot_options acs skip_dhcp_boot_options "0"
+
+	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
+		if [ "${skip_dhcp_boot_options}" -ne 1 ]; then
+			# Set dhcp option 43 if not already configured
+			enable_dhcp_option43 "${wan_interface}"
+			# Set dhcp option 60
+			set_vendor_id "${wan_interface}"
+		fi
+	fi
+
+	config_get ssl_capath acs ssl_capath
+
+	if [ -n "${ssl_capath}" ]; then
+		regenerate_ssl_link "${ssl_capath}"
+	fi
+
 	# Copy backup data so that if it restart latter on, it gets the info
 	copy_cwmp_etc_files_to_varstate
 	mkdir -p /var/run/icwmpd/
@@ -170,21 +263,13 @@ start_service() {

 stop_service()
 {
-	local switch_bank KeepConfig KeepOpConf ConfigScope
+	local switch_bank

 	copy_cwmp_varstate_files_to_etc
+	
 	switch_bank=$(uci -q -c /var/state/ get icwmp.cpe.switch_bank)
-	if [ "$switch_bank" = "1" ] && [ -x /etc/sysmngr/fwbank ]; then
-		KeepConfig="$(uci -q get cwmp.cpe.KeepConfig)"
-		KeepOpConf="$(uci -q get cwmp.cpe.KeepOpConf)"
-		ConfigScope="$(uci -q get cwmp.cpe.ConfigScope)"
-
-		json_init
-		[ -n "${KeepConfig}" ] && json_add_boolean "keep_config" "${KeepConfig}"
-		[ -n "${KeepOpConf}" ] && json_add_boolean "keep_opconf" "${KeepOpConf}"
-		[ -n "${ConfigScope}" ] && json_add_string "config_scope" "${ConfigScope}"
-
-		json_dump| /etc/sysmngr/fwbank call copy_config
+	if [ -n "$switch_bank" ] && [ "$switch_bank" = "1" ]; then
+		[ -x /etc/sysmngr/fwbank ] && /etc/sysmngr/fwbank call copy_config
 	fi
 }

--- a/icwmp/files/etc/uci-defaults/50-cwmp-align-keep-config
+++ b/icwmp/files/etc/uci-defaults/50-cwmp-align-keep-config
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-keep_settings="$(uci -q get cwmp.cpe.fw_upgrade_keep_settings)"
-if [ -n "${keep_settings}" ]; then
-	uci -q delete cwmp.cpe.fw_upgrade_keep_settings
-	uci -q set cwmp.cpe.KeepConfig="${keep_settings}"
-fi
--- a/icwmp/files/etc/uci-defaults/90-cwmpfirewall
+++ b/icwmp/files/etc/uci-defaults/90-cwmpfirewall
@@ -5,6 +5,7 @@ uci -q batch <<-EOT
        set firewall.cwmp=include
        set firewall.cwmp.path=/etc/icwmpd/firewall.cwmp
        set firewall.cwmp.reload=1
+        commit firewall
 EOT

 exit 0
--- a/icwmp/files/etc/uci-defaults/999-cwmp-annex-f-config
+++ b/icwmp/files/etc/uci-defaults/999-cwmp-annex-f-config
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-validate_inform_parameter() {
-	local section="${1}"
-	local target_param="${2}"
-	local parameter_name
-
-	config_get parameter_name "${section}" parameter_name
-	if [ "${parameter_name}" = "${target_param}" ]; then
-		return 0
-	fi
-
-	return 1
-}
-
-check_param_exists() {
-	local target_param="${1}" 
-	local found=1
-
-	check_section() {
-		local section="${1}"
-		if validate_inform_parameter "${section}" "${target_param}"; then
-			found=0
-		fi
-	}
-
-	config_foreach check_section inform_parameter
-	return "${found}"
-}
-
-configure_annex_f_inform_param() {
-	config_load cwmp
-
-	if ! check_param_exists "Device.GatewayInfo."; then
-		uci -q set cwmp.gw_info_param=inform_parameter
-		uci -q set cwmp.gw_info_param.enable='1'
-		uci -q set cwmp.gw_info_param.events_list='0 BOOTSTRAP,1 BOOT'
-		uci -q set cwmp.gw_info_param.parameter_name='Device.GatewayInfo.'
-	fi
-
-	if ! check_param_exists "Device.ManagementServer.ManageableDevice."; then
-		uci -q set cwmp.mng_dev_param=inform_parameter
-		uci -q set cwmp.mng_dev_param.enable='1'
-		uci -q set cwmp.mng_dev_param.events_list='0 BOOTSTRAP,1 BOOT'
-		uci -q set cwmp.mng_dev_param.parameter_name='Device.ManagementServer.ManageableDevice.'
-	fi
-}
-
-configure_annex_f_inform_param
--- a/icwmp/files/etc/uci-defaults/999-cwmp-conn-config
+++ b/icwmp/files/etc/uci-defaults/999-cwmp-conn-config
@@ -1,107 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t cwmp.defaults -p info
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-		fi
-	fi
-}
-
-enable_dhcp_option43() {
-	local wan="${1}"
-
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
-	for ropt in $reqopts; do
-		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
-	fi
-}
-
-regenerate_ssl_link() {
-	local cert_dir
-
-	cert_dir="${1%/}"
-	if [ -f "${cert_dir}" ]; then
-		return 0
-	fi
-
-	# do not generate the c_rehash if its system default cert path
-	# ca-certificate package already generates c_rehash on compilation
-	[ ! -d "${cert_dir}" ] || [ "${cert_dir}" = "/etc/ssl/certs" ] && return 0
-
-	generate_links() {
-		local file_type="$1"
-		local files="${cert_dir}"/*."${file_type}"
-		for cfile in ${files}; do
-			if [ -f "${cfile}" ]; then
-				rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-				if [ ! -f "${cert_dir}/${rehash}.0" ]; then
-					log "Generating c_rehash for ${cfile}=>${rehash}.0"
-					ln -s "${cfile}" "${cert_dir}/${rehash}.0"
-				fi
-			fi
-		done
-	}
-
-	generate_links "pem"
-}
-
-configure_dhcp_discovery() {
-	local dhcp_discovery wan_interface skip_dhcp_boot_options
-
-	config_load cwmp
-	config_get wan_interface cpe default_wan_interface "wan"
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get skip_dhcp_boot_options acs skip_dhcp_boot_options "0"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		if [ "${skip_dhcp_boot_options}" -ne 1 ]; then
-			# Set dhcp option 43 if not already configured
-			enable_dhcp_option43 "${wan_interface}"
-			# Set dhcp option 60
-			set_vendor_id "${wan_interface}"
-		fi
-	fi
-}
-
-configure_ssl_path() {
-	local ssl_capath
-
-	config_load cwmp
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-}
-
-configure_dhcp_discovery
-configure_ssl_path
--- a/icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
+++ b/icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
@@ -16,12 +16,12 @@ get_opt43() {
 	local opt43="$1"
 	local len="$2"

-	[ "${len}" -gt 2 ] || return
+	[ "$len" -gt "2" ] || return

 	first_byte=${opt43:0:2}
 	first_byte=$(printf "%d\n" "0x$first_byte")

-	if [ "${len}" -ge 4 ] && [ "${first_byte}" -ge 1 ] && [ "${first_byte}" -le 4 ]; then
+	if [ $len -ge 4 ] && [ $first_byte -ge 1 ] && [ $first_byte -le 4 ]; then
 		# it is in encapsulated form
 		# opt43 encapsulated vendor-specific option has data in below format
 		#  Code   Len   Data item        Code   Len   Data item        Code
@@ -35,7 +35,7 @@ get_opt43() {
 		data="${opt43}"
 		rem_len="${len}"
 		# parsing of suboption of option 43
-		while [ "${rem_len}" -gt 0 ]; do
+		while [ $rem_len -gt 0 ]; do
 			# get the suboption id
 			sub_opt_id=${data:0:2}
 			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
@@ -50,13 +50,13 @@ get_opt43() {

 			# assign the value found in sub option
 			case "${sub_opt_id}" in
-				"1") DHCP_ACS_URL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"1") DHCP_ACS_URL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"2") DHCP_PROV_CODE=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"2") DHCP_PROV_CODE=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"3") MIN_WAIT_INVL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"3") MIN_WAIT_INVL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"4") INVL_MULTIPLIER=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"4") INVL_MULTIPLIER=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
 			esac

@@ -70,14 +70,13 @@ get_opt43() {
 			rem_len=$((rem_len - sub_opt_end))
 		done
 	else
-		DHCP_ACS_URL=$(echo -n "${opt43}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+		DHCP_ACS_URL=$(echo -n $opt43 | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 	fi
 }

 config_load cwmp
 config_get wan_intf cpe default_wan_interface "wan"
 config_get dhcp_discovery acs dhcp_discovery "0"
-config_get_bool insecure_enable acs insecure_enable "0"
 config_get dhcp_url acs dhcp_url ""
 config_get min_wait_intvl acs dhcp_retry_min_wait_interval "0"
 config_get intvl_multi acs dhcp_retry_interval_multiplier "0"
@@ -93,9 +92,9 @@ if [ "$discovery_enable" = "0" ]; then
 	return 0
 fi

-if [ "${wan_intf}" = "${INTERFACE}" ]; then
+if [ "${wan_intf}" == "${INTERFACE}" ]; then
 	if [ -n "$opt43" ]; then
-		len=$(echo -n "$opt43"|wc -c)
+		len=$(printf "$opt43"|wc -c)
 		get_opt43 "$opt43" "$len"
 	fi

@@ -103,17 +102,6 @@ if [ "${wan_intf}" = "${INTERFACE}" ]; then
 		return 0
 	fi

-	if [ "${insecure_enable}" -eq "0" ]; then
-		case $DHCP_ACS_URL in
-		https://*)
-			log "ACS url $DHCP_ACS_URL has https"
-			;;
-		*)
-			return 0
-			;;
-		esac
-	fi
-
 	sec=$(uci -q get cwmp.acs)

 	if [ -z "${sec}" ]; then
--- a/ieee1905/Makefile
+++ b/ieee1905/Makefile
@@ -1,17 +1,16 @@
 #
 # Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis Sweden AB
 #

 include $(TOPDIR)/rules.mk

 PKG_NAME:=ieee1905
-PKG_VERSION:=8.7.44
+PKG_VERSION:=8.7.8

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=29ba8f04dc6bd7e77683352c0c71988f51fbadf8
+PKG_SOURCE_VERSION:=9c507bfb7f45fad81097262f05dc7cd11760e6b0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -106,7 +105,6 @@ TARGET_CFLAGS += -DHAS_UBUS

 ifeq ($(CONFIG_IEEE1905_BUILD_TR181_PLUGIN),y)
 TARGET_CFLAGS += -DBUILD_TR181_PLUGIN
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
 endif

 MAKE_FLAGS += \
@@ -116,7 +114,7 @@ MAKE_PATH:=src


 define Package/ieee1905/install
-	$(CP) ./files/etc $(1)/
+	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
 	$(INSTALL_DIR) $(1)/usr/sbin
--- a/ieee1905/files/datamodel_description.json
+++ b/ieee1905/files/datamodel_description.json
@@ -1,23 +0,0 @@
-{
-	"Device.IEEE1905.AL.": {
-		"type": "object",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"{BBF_VENDOR_PREFIX}LocalOnlyMode": {
-			"type": "boolean",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"description": "Enable or disable interfaces from ieee1905.",
-			"datatype": "boolean"
-		}
-	}
-}
-
--- a/ieee1905/files/etc/config/ieee1905
+++ b/ieee1905/files/etc/config/ieee1905
@@ -12,7 +12,6 @@ config al-iface
 	list ifname 'br-lan'
 	list ifname '/eth.*'
 	list ifname '/wl.*'
-	list ifname '/ra.*'
 	list ifname '/wds.*'

 # ap sections are auto-generated/overwritten during onboarding
--- a/ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr
+++ b/ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr
@@ -1,9 +1,10 @@
 #!/bin/sh

-. /lib/functions/system.sh

-BMAC=$(get_mac_label)
+BMAC=$(db -q get hw.board.basemac)
 BMAC=${BMAC//:/}
+BMAC=${BMAC// /}
+BMAC=$(printf "%12.12X" $((0x$BMAC)))

 [ "$BMAC" == "" ] && exit 1

--- a/imonitor/Makefile
+++ b/imonitor/Makefile
@@ -13,7 +13,7 @@ PKG_INSTALL:=1
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
--- a/iopsys-analytics/Makefile
+++ b/iopsys-analytics/Makefile
@@ -4,7 +4,7 @@ PKG_NAME:=iopsys-analytics
 PKG_RELEASE:=$(COMMITCOUNT)
 PKG_LICENSE:=PROPRIETARY
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5ad41ca8eb5de887487feb7148b5dce44943218c
+PKG_SOURCE_VERSION:=00189cea0a78b7a30dbfdd363b6d8e836437d1bc
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopsys-analytics.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -31,12 +31,8 @@ define Package/$(PKG_NAME)
    +@PACKAGE_COLLECTD_ENCRYPTED_NETWORK                \
  # remote syslog
  DEPENDS+=                                             \
-    +@PACKAGE_syslog-ng:SYSLOGNG_LOGROTATE              \
-    +PACKAGE_fluent-bit:logrotate                       \
-    +@DMCLI_REMOTE_CONNECTION
-  # tools used in development/testing
-  DEPENDS+=                                             \
-    +iperf3
+    +syslog-ng                                          \
+    +@SYSLOGNG_LOGROTATE                                \

 endef

@@ -48,13 +44,7 @@ endef
 Build/Compile=

 define Package/$(PKG_NAME)/install
-	$(CP) -r $(PKG_BUILD_DIR)/files/common/*  $(1)/
-ifneq ($(CONFIG_PACKAGE_fluent-bit),)
-	$(CP) -r $(PKG_BUILD_DIR)/files/fluent-bit/*  $(1)/
-endif
-ifneq ($(CONFIG_PACKAGE_syslog-ng),)
-	$(CP) -r $(PKG_BUILD_DIR)/files/syslog-ng/*  $(1)/
-endif
+	$(CP) -r $(PKG_BUILD_DIR)/files/*  $(1)/
 endef

 $(eval $(call BuildPackage,$(PKG_NAME)))
--- a/ipt-trigger/Makefile
+++ b/ipt-trigger/Makefile
@@ -6,15 +6,15 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk

 PKG_NAME:=ipt-trigger
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.2
 PKG_LICENSE:=GPL-2.0

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ac1beae4794f99533b28db7d0e6e80f4c268a3e8
+PKG_SOURCE_VERSION:=4f3d4427403e0a9be7653c1b92907ae8ae5f21ae
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ipt-trigger.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/json-schema-validator/Makefile
+++ b/json-schema-validator/Makefile
@@ -1,55 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=json-schema-validator
-PKG_VERSION:=2.3.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/pboettch/json-schema-validator.git
-PKG_SOURCE_VERSION:=$(PKG_VERSION)
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_BUILD_DEPENDS:=nlohmann-json
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-CMAKE_OPTIONS += \
-	-DJSON_VALIDATOR_BUILD_TESTS=OFF \
-	-DJSON_VALIDATOR_BUILD_EXAMPLES=OFF \
-	-DJSON_VALIDATOR_INSTALL=ON \
-	-DJSON_VALIDATOR_SHARED_LIBS=OFF
-
-define Package/json-schema-validator
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=JSON Schema Validator for nlohmann::json
-  URL:=https://github.com/pboettch/json-schema-validator
-  DEPENDS:=+libstdcpp +nlohmann-json
-endef
-
-define Package/json-schema-validator/description
-  A JSON Schema Validator for Modern C++ using nlohmann/json.
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/nlohmann
-	$(CP) $(PKG_BUILD_DIR)/src/nlohmann/json-schema.hpp $(1)/usr/include/nlohmann/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libnlohmann_json_schema_validator*.a $(1)/usr/lib/ 2>/dev/null || true
-	$(CP) $(PKG_BUILD_DIR)/libnlohmann_json_schema_validator*.so* $(1)/usr/lib/ 2>/dev/null || true
-endef
-
-define Package/json-schema-validator/install
-	true
-endef
-
-$(eval $(call BuildPackage,json-schema-validator))
--- a/jsonval/Makefile
+++ b/jsonval/Makefile
@@ -1,44 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=jsonval
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_LICENSE:=MIT
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/jsonval
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Command-line JSON Schema Validator
-  DEPENDS:=+nlohmann-json +json-schema-validator +libstdcpp
-endef
-
-define Package/jsonval/description
-  A small CLI tool to validate JSON files against a schema using json-schema-validator and nlohmann/json.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	cp -r ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(TARGET_CXX) \
-		$(TARGET_CXXFLAGS) -std=c++17 \
-		-I$(STAGING_DIR)/usr/include \
-		-I$(STAGING_DIR)/usr/include/nlohmann \
-		-L$(STAGING_DIR)/usr/lib \
-		$(PKG_BUILD_DIR)/main.cpp \
-		-o $(PKG_BUILD_DIR)/jsonval \
-		-lnlohmann_json_schema_validator
-endef
-
-define Package/jsonval/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/jsonval $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,jsonval))
--- a/jsonval/src/main.cpp
+++ b/jsonval/src/main.cpp
@@ -1,64 +0,0 @@
-#include <iostream>
-#include <fstream>
-#include <string>
-#include <nlohmann/json.hpp>
-#include <nlohmann/json-schema.hpp>
-
-using nlohmann::json;
-using nlohmann::json_schema::json_validator;
-using namespace std;
-
-void print_usage(const string& prog_name) {
-	cerr << "Usage: " << prog_name << " -s <schema.json> -j <data.json>" << endl;
-}
-
-int main(int argc, char* argv[]) {
-	string schema_path, data_path;
-
-	// Simple argument parsing
-	for (int i = 1; i < argc; ++i) {
-		string arg = argv[i];
-		if ((arg == "-s" || arg == "--schema") && i + 1 < argc) {
-			schema_path = argv[++i];
-		} else if ((arg == "-j" || arg == "--json") && i + 1 < argc) {
-			data_path = argv[++i];
-		} else {
-			print_usage(argv[0]);
-			return 1;
-		}
-	}
-
-	if (schema_path.empty() || data_path.empty()) {
-		print_usage(argv[0]);
-		return 1;
-	}
-
-	ifstream schema_file(schema_path);
-	ifstream data_file(data_path);
-
-	if (!schema_file.is_open() || !data_file.is_open()) {
-		cerr << "Error: Could not open one or both files." << endl;
-		return 2;
-	}
-
-	json schema, document;
-	try {
-		schema_file >> schema;
-		data_file >> document;
-	} catch (const json::parse_error& e) {
-		cerr << "Parse error: " << e.what() << endl;
-		return 3;
-	}
-
-	try {
-		json_validator validator;
-		validator.set_root_schema(schema);
-		validator.validate(document);
-		cout << "Valid" << endl;
-	} catch (const std::exception& e) {
-		cerr << "Validation failed: " << e.what() << endl;
-		return 4;
-	}
-
-	return 0;
-}
--- a/libdpp/Makefile
+++ b/libdpp/Makefile
@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=libdpp
-PKG_VERSION:=2.1.3
+PKG_VERSION:=2.1.1

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=fdfe23e51ff77ca6d2661ad6208d097758524147
+PKG_SOURCE_VERSION:=6024efd3db9dd490c07465ea9b0c15120063165c
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/libdpp.git
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
--- a/libdsl/Makefile
+++ b/libdsl/Makefile
@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=libdsl
-PKG_VERSION:=7.3.2
+PKG_VERSION:=7.2.100

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=20875ec79fcc7c546c2f1253c867d6afbc8bff75
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libdsl.git
-PKG_SOURCE_VERSION:=1aa9c40f9503311652e562617b1e15533257adcc
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -37,9 +37,6 @@ else ifeq ($(CONFIG_TARGET_x86),y)
 else ifeq ($(CONFIG_TARGET_armvirt),y)
  TARGET_PLATFORM=TEST
  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=AIROHA
-  TARGET_CFLAGS +=-DIOPSYS_AIROHA
 endif

 TARGET_CFLAGS += \
@@ -60,7 +57,7 @@ define Package/libdsl
  SUBMENU:=IOPSYS HAL libs
  MENU:=1
  TITLE:= xDSL library (libdsl)
-  DEPENDS+=TARGET_brcmbca:bcm963xx-bsp +TARGET_airoha:libeasy
+  DEPENDS+=TARGET_brcmbca:bcm963xx-bsp
 endef

 define Package/libdsl/description
--- a/libeasy/Makefile
+++ b/libeasy/Makefile
@@ -1,28 +1,32 @@
 #
-# Copyright (C) 2025 Genexis Sweden AB
+# Copyright (C) 2020-2023 Iopsys
 #

 include $(TOPDIR)/rules.mk

 PKG_NAME:=libeasy
-PKG_VERSION:=7.5.1
+PKG_VERSION:=7.4.6

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b981f7e1bd51f66041cd0c25d15af74ae1e3bc75
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libeasy.git
+PKG_SOURCE_VERSION:=ca7b20068c9d373e41045a2e899a9c697576262c
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libeasy.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
-PKG_LICENSE_FILES:=
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
+PKG_LICENSE_FILES:=LICENSE

 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3

 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -30,6 +34,9 @@ define Build/Prepare
 endef
 endif

+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall"
+
 define Package/libeasy
  SECTION:=libs
  CATEGORY:=Libraries
@@ -40,7 +47,7 @@ define Package/libeasy
 endef

 define Package/libeasy/description
-  This package provides libeasy.so for common utility functions.
+  Library provides common utility functions
 endef

 define Build/InstallDev/libeasy
@@ -60,7 +67,6 @@ define Build/InstallDev/libeasy
 endef

 define Build/InstallDev
-	$(call Build/InstallDev/cmake,$(1))
 	$(call Build/InstallDev/libeasy,$(1),$(2))
 endef

--- a/libpicoevent-bcm/Makefile
+++ b/libpicoevent-bcm/Makefile
@@ -17,7 +17,7 @@ PKG_NAME:=libpicoevent-bcm
 PKG_LICENSE:=LGPL-2.1-only
 PKG_LICENSE_FILES:=LICENSE
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

 include $(INCLUDE_DIR)/package.mk
--- a/libpicoevent/Makefile
+++ b/libpicoevent/Makefile
@@ -17,7 +17,7 @@ PKG_NAME:=libpicoevent
 PKG_LICENSE:=LGPL-2.1-only
 PKG_LICENSE_FILES:=LICENSE
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

 include $(INCLUDE_DIR)/package.mk
--- a/libqos/Makefile
+++ b/libqos/Makefile
@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=libqos
-PKG_VERSION:=7.2.111
+PKG_VERSION:=7.2.109

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libqos.git
-PKG_SOURCE_VERSION:=2e4c6a9c27e0f4f68dfe7a5c930afefd8dc7119a
+PKG_SOURCE_VERSION:=4948d372c3d7e43a0ba9aee517dbb83b94bba3dc
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -65,7 +65,7 @@ define Package/libqos
  SUBMENU:=IOPSYS HAL libs
  MENU:=1
  TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_brcmbca:bcm963xx-bsp +TARGET_airoha:libuci
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_brcmbca:bcm963xx-bsp
 endef

 define Package/libqos/config
--- a/libtrace/Makefile
+++ b/libtrace/Makefile
@@ -6,7 +6,7 @@ PKG_RELEASE:=1

 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/apietila/libtrace.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_VERSION:=e4b4c5cce35a52da152776a00532aa0b80879c5b
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

--- a/libvoice-airoha/Makefile
+++ b/libvoice-airoha/Makefile
@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk

 PKG_NAME:=libvoice-airoha
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.8
+PKG_VERSION:=1.1.3
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE

@@ -17,8 +17,8 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=9763c574ec69e2aa492db4f1296d4bcd53776fba
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE_VERSION:=f4ffa38b77e20f9e2a6b6ffd5b2bf83cddb6bffc
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/libvoice-airoha/files/etc/uci-defaults/991-libvoice-airoha
+++ b/libvoice-airoha/files/etc/uci-defaults/991-libvoice-airoha
@@ -25,5 +25,6 @@ db commit
 # configure the PCM for DECT/DCX81
 [ -f "/proc/device-tree/aliases/dcx81-uart" ] && {
    uci set dect.global.pcm_fsync='SHORT_LF'
+    uci set dect.global.pcm_slot_start='8'
    uci set dect.global.dect_channel_start='3'
 }
--- a/libvoice-broadcom/Makefile
+++ b/libvoice-broadcom/Makefile
@@ -18,7 +18,7 @@ ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
 PKG_SOURCE_VERSION:=baf5ebfb45404714bbfcc3068080f93265934d8a
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/libvoice-d2/Makefile
+++ b/libvoice-d2/Makefile
@@ -18,7 +18,7 @@ ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
 PKG_SOURCE_VERSION:=0b2bef862fb5aea0b285e339459f46779224e2d0
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

--- a/libwifi/Makefile
+++ b/libwifi/Makefile
@@ -1,32 +1,27 @@
 #
-# Copyright (C) 2019-2024 Iopsys
-# Copyright (C) 2025 Genexis Sweden AB
+# Copyright (C) 2020-2023 Iopsys
 #

 include $(TOPDIR)/rules.mk

 PKG_NAME:=libwifi
-PKG_VERSION:=7.22.11
+PKG_VERSION:=7.12.10

 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6572047d613d4dc88ed83a80fb4ae0798ab71078
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libwifi.git
+PKG_SOURCE_VERSION:=2bd3a37cc5c14af93d0af1643610285d8d382fba
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libwifi.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
-PKG_LICENSE_FILES:=
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
-
-MAKE_VERBOSE := 1
+PKG_LICENSE_FILES:=LICENSE

 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/kernel.mk
-include $(INCLUDE_DIR)/cmake.mk

 ifeq ($(CONFIG_TARGET_brcmbca),y)
  TARGET_PLATFORM=BROADCOM
@@ -47,20 +42,10 @@ else ifeq ($(CONFIG_TARGET_armvirt),y)
 else ifeq ($(CONFIG_TARGET_airoha),y)
  TARGET_PLATFORM=ECONET
  TARGET_WIFI_TYPE=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_ECONET -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
  ifeq ($(CONFIG_TARGET_airoha_an7581),y)
    TARGET_CFLAGS +=-DCONFIG_MTK
  endif
-else ifeq ($(CONFIG_TARGET_mediatek),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  ifeq ($(CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_cx750),y)
-    TARGET_WIFI_TYPE=MEDIATEK
-    TARGET_CFLAGS +=-DCONFIG_MTK -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
-  else ifeq ($(CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_mediatek_mt7987a-spim-nand-an8801sb),y)
-    TARGET_WIFI_TYPE=MEDIATEK
-    TARGET_CFLAGS +=-DCONFIG_MTK -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
-  endif
 else ifeq ($(CONFIG_TARGET_ipq95xx),y)
  TARGET_PLATFORM=IPQ95XX
  TARGET_WIFI_TYPE=QUALCOMM
@@ -76,13 +61,13 @@ else
 endif

 ifneq ($(CONFIG_PACKAGE_kmod-mt7915e_en7523),)
-  TARGET_CFLAGS +=-DMT7915_VENDOR_EXT
+  TARGET_CFLAGS=-DMT7915_VENDOR_EXT
 endif

 PKG_BUILD_DEPENDS:=PACKAGE_kmod-mt7915e_en7523:mt76_en7523

 ifneq ($(CONFIG_PACKAGE_libwifi),)
-  CMAKE_OPTIONS +=-DHAS_WIFI=ON
+TARGET_CFLAGS +=-DHAS_WIFI
 endif

 ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
@@ -93,8 +78,18 @@ ifeq ($(CONFIG_LIBWIFI_SKIP_PROBES),y)
  TARGET_CFLAGS +=-DLIBWIFI_BRCM_SKIP_PROBES
 endif

+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3

-CMAKE_OPTIONS += -DPLATFORM=$(TARGET_PLATFORM) -DWIFI_TYPE=$(TARGET_WIFI_TYPE)
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
+	subdirs="$(subdirs)"

 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -102,39 +97,43 @@ define Build/Prepare
 endef
 endif

-define Package/libwifiutils
-	SECTION:=libs
-	CATEGORY:=Libraries
-	TITLE:= WiFi utility library (libwifiutils.so)
-	DEPENDS+=+libnl +libnl-route +libeasy +libopenssl
-endef
-
-define Package/libwifiutils/description
-	Library provides WiFi utility functions
-endef
-
-define Package/libwifi
-	SECTION:=libs
-	CATEGORY:=Libraries
-	TITLE:= WiFi HAL library (libwifi-7.so.m)
-	DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcm963xx-bsp
+define Package/libwifi-common
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=libwifi
+  SUBMENU:=IOPSYS HAL libs
+  DEPENDS:=+libopenssl
+  MENU:=1
 endef

 define Package/libwifi/description
-	Library provides WiFi HAL APIs
+  Library provides WiFi HAL APIs and WiFi common utility functions
+endef
+
+define Package/libwifiutils
+  $(call Package/libwifi-common)
+  TITLE:= WiFi utility library (libwifiutils.so)
+  DEPENDS+=+libnl +libnl-route +libeasy
 endef

 define Build/InstallDev/libwifiutils
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils/libwifiutils*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
 endef

 define Package/libwifiutils/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils/libwifiutils*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+
+define Package/libwifi
+  $(call Package/libwifi-common)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcm963xx-bsp
 endef

 define Package/libwifi/config
@@ -155,12 +154,13 @@ define Package/libwifi/config
  endif
 endef

+
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/wifiops.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
 endef


@@ -173,7 +173,7 @@ endef

 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
 endef

 $(eval $(call BuildPackage,libwifiutils))
--- a/linux-pam/Makefile
+++ b/linux-pam/Makefile
@@ -31,8 +31,8 @@ MESON_ARGS += \

 define Package/linux-pam/install
 	$(INSTALL_DIR) $(1)/usr/lib/security
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./linux_pam.init $(1)/etc/init.d/linux_pam
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/pam_faillock.uci_default $(1)/etc/uci-defaults/99-add_pam_faillock
 endef

 $(eval $(call BuildPackage,linux-pam))
--- a/linux-pam/files/pam_faillock.uci_default
+++ b/linux-pam/files/pam_faillock.uci_default
@@ -0,0 +1,43 @@
+#!/bin/sh
+
+create_faillock_files()
+{
+	# also create files needed by pam_faillock
+	touch /var/log/faillock
+	chmod 700 /var/log/faillock
+	touch /var/log/btmp
+	chmod 700 /var/log/btmp
+}
+
+update_pam_common_auth()
+{
+	local file="/etc/pam.d/common-auth"
+	local deny=6
+	local unlock_time=300
+
+	# update pam_unix.so line
+	sed -i -E 's|^.*pam_unix\.so.*|auth\t sufficient\tpam_unix.so nullok_secure|' "$file"
+
+	# Insert pam_faillock lines before and after pam_unix.so
+	sed -i -E "/pam_unix.so nullok_secure/i auth     required       pam_faillock.so preauth deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
+	sed -i -E "/pam_unix.so nullok_secure/a auth     [default=die]  pam_faillock.so authfail audit deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
+}
+
+update_pam_common_account()
+{
+	# update account file
+	sed -i "/pam_unix.so/ i account  required       pam_faillock.so" /etc/pam.d/common-account
+}
+
+if [ -f "/usr/lib/security/pam_faillock.so" ]; then
+	update_pam_common_auth
+	update_pam_common_account
+	create_faillock_files
+fi
+
+if [ -f /etc/config/sshd ]; then
+	uci -q set sshd.@sshd[0].UsePAM=1
+	uci commit sshd
+fi
+
+exit 0
--- a/linux-pam/linux_pam.init
+++ b/linux-pam/linux_pam.init
@@ -1,18 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=11
-STOP=90
-USE_PROCD=1
-
-create_faillock_files()
-{
-	# also create files needed by pam_faillock
-	touch /var/log/faillock
-	chmod 700 /var/log/faillock
-	touch /var/log/btmp
-	chmod 700 /var/log/btmp
-}
-
-boot() {
-	create_faillock_files
-}
--- a/logmngr/Config.in
+++ b/logmngr/Config.in
@@ -1,5 +1,4 @@
 if PACKAGE_logmngr
-
 choice
 	prompt "Select backend for syslog management"
 	default LOGMNGR_BACKEND_FLUENTBIT
@@ -32,5 +31,4 @@ config LOGMNGR_VENDOR_LOG_FILE
 	default y
 	help
 		It adds support for Device.DeviceInfo.VendorLogFile. Object.
-
 endif
--- a/logmngr/Makefile
+++ b/logmngr/Makefile
@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=logmngr
-PKG_VERSION:=1.1.4
+PKG_VERSION:=1.0.15

 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/system/logmngr.git
-PKG_SOURCE_VERSION:=62441fdfe14a39bff8fff7c62307bd7b54d7240f
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.zst
+PKG_SOURCE_VERSION:=1561b71a2225af737db9f091204247ab4e141abb
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

@@ -29,6 +29,7 @@ define Package/logmngr
 CATEGORY:=Utilities
 TITLE:=Logging Manager
 DEPENDS:=+LOGMNGR_BACKEND_FLUENTBIT:fluent-bit
+ DEPENDS+=+@LOGMNGR_BACKEND_FLUENTBIT:BUSYBOX_CONFIG_KLOGD
 DEPENDS+=+LOGMNGR_BACKEND_SYSLOG_NG:syslog-ng
 DEPENDS+=+LOGMNGR_LOGROTATE:logrotate
 DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
@@ -52,37 +53,31 @@ endif

 define Package/logmngr/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_BIN) ./files/logmngr.init $(1)/etc/init.d/logmngr
+
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/10-logmngr_config_generate $(1)/etc/uci-defaults/

-	$(INSTALL_BIN) ./files/etc/init.d/logmngr $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/logmngr $(1)/etc/config/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/10-logmngr_config_migrate $(1)/etc/uci-defaults/
-
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfsyslog.so $(1) core 10
-
-	# Install logmngr service backend
 	$(INSTALL_DIR) $(1)/lib/logmngr
 ifeq ($(CONFIG_LOGMNGR_BACKEND_FLUENTBIT),y)
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp/
-	$(INSTALL_BIN) ./files/logread $(1)/sbin/
 	$(INSTALL_DATA) ./files/lib/logmngr/fluent-bit.sh $(1)/lib/logmngr/
-	$(INSTALL_BIN) ./files/etc/hotplug.d/ntp/20-reload_fluent_bit $(1)/etc/hotplug.d/ntp/
-else ifeq ($(CONFIG_LOGMNGR_BACKEND_SYSLOG_NG),y)
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) ./files/logmngr-klogd $(1)/usr/libexec/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) ./files/logread $(1)/sbin/
+endif
+ifeq ($(CONFIG_LOGMNGR_BACKEND_SYSLOG_NG),y)
 	$(INSTALL_DATA) ./files/lib/logmngr/syslog-ng.sh $(1)/lib/logmngr/
 endif
-
+	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfsyslog.so $(1) core 10
 ifeq ($(CONFIG_LOGMNGR_LOGROTATE),y)
+	$(INSTALL_BIN) ./files/11-logmngr_logrotate_config_generate $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/logmngr/logrotate.sh $(1)/lib/logmngr/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/11-logmngr_logrotate_syslog $(1)/etc/uci-defaults/
 	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbflogrotate.so $(1) sysmngr 11
 endif
-
 ifeq ($(CONFIG_LOGMNGR_VENDOR_LOG_FILE),y)
 	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfvendorlog.so $(1) sysmngr 12
 endif
-
 endef

 $(eval $(call BuildPackage,logmngr))
--- a/logmngr/files/10-logmngr_config_generate
+++ b/logmngr/files/10-logmngr_config_generate
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+if uci -q get logmngr.@globals[0] >/dev/null; then
+	# return if there is any valid content
+	exit 0
+else
+	rm -f /etc/config/logmngr
+fi
+
+touch /etc/config/logmngr
+
+uci set logmngr.globals=globals
+uci set logmngr.globals.enable=1
+
+uci set logmngr.a1=action
+uci set logmngr.a1.name="ac1"
+
+uci set logmngr.lf1=log_file
+uci set logmngr.lf1.enable=1
+uci set logmngr.lf1.action="ac1"
+uci set logmngr.lf1.file="/var/log/messages"
+
+uci set logmngr.lr1=log_remote
+uci set logmngr.lr1.enable=0
+uci set logmngr.lr1.action="ac1"
+uci set logmngr.lr1.port="514"
--- a/logmngr/files/etc/uci-defaults/11-logmngr_logrotate_syslog
+++ b/logmngr/files/etc/uci-defaults/11-logmngr_logrotate_syslog
@@ -1,7 +1,7 @@
 #!/bin/sh

 # Adds a default log rotate policy if none exists
-if uci -q get logmngr.lro1 >/dev/null; then
+if uci -q get logmngr.@log_rotate[0] >/dev/null; then
 	# return if there is any valid content
 	exit 0
 fi
--- a/logmngr/files/etc/config/logmngr
+++ b/logmngr/files/etc/config/logmngr
@@ -1,26 +0,0 @@
-config globals 'globals'
-	option enable '1'
-
-config source 'default_source'
-	option name 'default_source'
-	option system_messages '1'
-	option kernel_messages '1'
-
-config template 'default_template'
-	option name 'default_template'
-	option expression '{time} {hostname} {ident}[{pid}]: {message}'
-
-config action 'default_action'
-	option name 'default_action'
-	list source 'default_source'
-	option template 'default_template'
-
-config log_file 'lf1'
-	option enable '1'
-	option action 'default_action'
-	option file '/var/log/messages'
-
-config log_remote 'lr1'
-	option enable '0'
-	option action 'default_action'
-	option port '514'
--- a/logmngr/files/etc/hotplug.d/ntp/20-reload_fluent_bit
+++ b/logmngr/files/etc/hotplug.d/ntp/20-reload_fluent_bit
@@ -1,14 +0,0 @@
-#!/bin/sh
-# This hotplug script reloads fluent-bit, so that kmsg logs' timestamp gets in sync
-
-[ "$ACTION" = stratum ] || exit 0
-
-# only once
-if ! uci -q get time.global.first_use_date > /dev/null 2>&1; then
-	flb_pid="$(pidof fluent-bit)"
-
-	if [ -n "$flb_pid" ]; then
-		logger -t "logmngr.hotplug" -p info "reload fluent-bit due to ntp sync"
-		kill -SIGHUP "$flb_pid"
-	fi
-fi
--- a/logmngr/files/etc/uci-defaults/10-logmngr_config_migrate
+++ b/logmngr/files/etc/uci-defaults/10-logmngr_config_migrate
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-# check if this is a new type UCI or old type UCI
-if ! uci -q get logmngr.default_source > /dev/null; then
-	uci -q set logmngr.default_source=source
-	uci -q set logmngr.default_source.name='default_source'
-	uci -q set logmngr.default_source.system_messages='1'
-	uci -q set logmngr.default_source.kernel_messages='1'
-fi
-
-if ! uci -q get logmngr.default_template > /dev/null; then
-	uci -q set logmngr.default_template=template
-	uci -q set logmngr.default_template.name='default_template'
-	uci -q set logmngr.default_template.expression='{time} {hostname} {ident}[{pid}]: {message}'
-fi
-
-if uci -q get logmngr.a1 >/dev/null; then
-	uci -q rename logmngr.a1='default_action'
-	uci -q set logmngr.default_action.name='default_action'
-	uci -q set logmngr.default_action.template='default_template'
-
-	uci -q delete logmngr.default_action.source
-	uci -q add_list logmngr.default_action.source='default_source'
-fi
-
-if uci -q get logmngr.lf1 >/dev/null; then
-	uci -q rename logmngr.lf1='default_logfile'
-	uci -q set logmngr.default_logfile.action='default_action'
-fi
-
-if uci -q get logmngr.lr1 >/dev/null; then
-	uci -q rename logmngr.lr1='default_logremote'
-	uci -q set logmngr.default_logremote.action='default_action'
-fi
-
-exit 0
--- a/logmngr/files/lib/logmngr/fluent-bit.sh
+++ b/logmngr/files/lib/logmngr/fluent-bit.sh
@@ -5,38 +5,7 @@

 CONF_FILE=/etc/fluent-bit/fluent-bit.conf
 TMP_CONF_FILE=/tmp/fluent-bit/fluent-bit.conf
-FLUENT_BIT_CONF_DIR=/etc/fluent-bit/conf.d
-PROCESSED_SYSLOG_TAGS=""
-PROCESSED_KMSG_TAGS=""
-
-# check if syslog source section is already processed
-# and add it to the list of processed source sections
-syslog_tag_already_processed() {
-	local tag="$1"
-
-	for t in $PROCESSED_SYSLOG_TAGS; do
-		[ "$t" = "$tag" ] && return 0
-	done
-
-	PROCESSED_SYSLOG_TAGS="$tag $PROCESSED_SYSLOG_TAGS"
-
-	return 1
-}
-
-# check if kmsg source section is already processed
-# and add it to the list of processed source sections
-# two separate functions used because we want to populate
-# appropriate PROCESSED variable
-kmsg_tag_already_processed() {
-	local tag="$1"
-	for t in $PROCESSED_KMSG_TAGS; do
-		[ "$t" = "$tag" ] && return 0
-	done
-
-	PROCESSED_KMSG_TAGS="$tag $PROCESSED_KMSG_TAGS"
-
-	return 1
-}
+CONF_DIR=/etc/fluent-bit/conf.d

 append_conf() {
 	echo "$*" >> ${TMP_CONF_FILE}
@@ -46,287 +15,210 @@ create_config_file() {
 	mkdir -p /tmp/fluent-bit
 	rm -f ${TMP_CONF_FILE}
 	touch ${TMP_CONF_FILE}
-	# include all files placed in FLUENT_BIT_CONF_DIR directory
+	# include all files placed in CONF_DIR directory
 	# fluent-bit does not support using directory in include directive
 	# also, if no file is found then fluent-bit aborts
-	# so only add include if any file is present in the FLUENT_BIT_CONF_DIR
-	if [ -d "$FLUENT_BIT_CONF_DIR" ] && [ "$(ls -A "$FLUENT_BIT_CONF_DIR")" ]; then
-		append_conf "@INCLUDE ${FLUENT_BIT_CONF_DIR}/*"
+	# so only add include if any file is present in the CONF_DIR
+        if [ -d "$CONF_DIR" ] && [ "$(ls -A "$CONF_DIR")" ]; then
+		echo "@INCLUDE ${CONF_DIR}/*" >> ${TMP_CONF_FILE}
 	fi
-	append_conf ""
+	echo "" >> ${TMP_CONF_FILE}
 }

 create_service_section() {
 	# the service section of the fluent-bit.conf file has hardcoded values,
 	# no need to lookup any uci section to configure this section
-	append_conf "[SERVICE]"
-	append_conf "    flush        1"
-	append_conf "    daemon       off"
-	append_conf "    log_level    info"
-	append_conf "    coro_stack_size    1048576"
-	append_conf "    parsers_file /etc/fluent-bit/parsers.conf"
-	append_conf "    hot_reload        on"
-	append_conf ""
-}
-
-create_default_filters() {
-	append_conf "[FILTER]"
-	append_conf "    name            modify"
-	append_conf "    match           KM*"
-	append_conf "    add             ident   kernel"
-	append_conf "    rename          msg     message"
-	append_conf ""
-
-	append_conf "[FILTER]"
-	append_conf "    name            modify"
-	append_conf "    match           *"
-	append_conf "    add             pid     0"
-	append_conf ""
-
-	append_conf "[FILTER]"
-	append_conf "    name            sysinfo"
-	append_conf "    match           *"
-	append_conf "    hostname_key    hostname"
-	append_conf ""
+	echo "[SERVICE]" >> ${TMP_CONF_FILE}
+	echo "    flush        1" >> ${TMP_CONF_FILE}
+	echo "    daemon       off" >> ${TMP_CONF_FILE}
+	echo "    log_level    info" >> ${TMP_CONF_FILE}
+	echo "    coro_stack_size    24576" >> ${TMP_CONF_FILE}
+	echo "    parsers_file /etc/fluent-bit/parsers.conf" >> ${TMP_CONF_FILE}
+	echo "    hot_reload        on" >> ${TMP_CONF_FILE}
+	echo "" >> ${TMP_CONF_FILE}
 }

 create_input_section() {
 	local tag="$1"

-	[ -z "$tag" ] && return
-
-	# check if this source section has already been processed
-	syslog_tag_already_processed "$tag" && return
-
-	append_conf "[INPUT]"
-	append_conf "    name        syslog"
-	append_conf "    unix_perm   0666"
-	append_conf "    tag         $tag"
-	append_conf "    path        /dev/log"
-	append_conf ""
+	# the input in our case is always syslog, hence, this section of the
+	# fluent-bit.conf file has hardcoded values as well that do not depend
+	# on any uci value
+	echo "[INPUT]" >> ${TMP_CONF_FILE}
+	echo "    name        syslog" >> ${TMP_CONF_FILE}
+	echo "    tag         $tag" >> ${TMP_CONF_FILE}
+	echo "    path        /dev/log" >> ${TMP_CONF_FILE}
+	echo "" >> ${TMP_CONF_FILE}
 }

-populate_allowed_logs() {
-	local facility_level sev_level
-	local section="$1"
+generate_facility_regex() {
+	local facility_level=$1
+	local pri=0

-	[ -z "$section" ] && return
-
-	# reset
-	match_pattern=""
-	facilities=""
-	all_facilities=0
-	kern_facility=0
-	severities=""
-	sev_compare=1
-	sev_action=0
-
-	# read config
-	config_get match_pattern $section pattern_match
-
-	config_get facility_level $section facility_level
-	config_get sev_level $section severity_level
-	config_get sev_compare $section severity_compare 1
-	config_get sev_action $section severity_action 0
-
-	# normalize facilities
-	if [ -n "$facility_level" ]; then
-		for f in $facility_level; do
-			if [ "$f" = "24" ]; then
-				all_facilities=1
-				# xargs is used to convert from new line separated numbers to space separated numbers
-				facilities="$(seq 0 23 | xargs)"
-				break
-			fi
-
-			if [ "$f" = "0" ]; then
-				kern_facility=1
-			fi
-		done
-
-		if [ "$all_facilities" -eq 0 ]; then
-			facilities="$facility_level"
-		fi
-	else
-		# default to "all facilities" when unset
-        	all_facilities=1
-	        facilities="$(seq 0 23 | xargs)"
-	fi
-
-	# normalize severities
-	case "$sev_level" in
-		8)  	# all severities
-			severities="$(seq 0 7 | xargs)"
-			;;
-		9)  	# none
-			severities="none"
-			;;
-		"") 	# unset, treat as "all"
-			severities="$(seq 0 7 | xargs)"
-			;;
-		*)
-			if [ "$sev_compare" = "0" ]; then
-				# equal
-				severities="$sev_level"
-			else
-				# equl or higher
-				severities="$(seq 0 $sev_level | xargs)"
-			fi
-			;;
-	esac
-}
-
-create_filter_section() {
-	local match_regex="$1"
-	local pattern="$2"
-
-	[ -z "$match_regex" ] && return
-
-	append_conf "[FILTER]"
-	append_conf "    name        grep"
-	append_conf "    match_regex       $match_regex"
-
-	# we need "logical_op or" only in non-pattern sections
-	if [ "$pattern" = "0" ]; then
-		append_conf "    logical_op  or" # handle multiple filters
-	fi
-}
-
-create_kmsg_input_section() {
-	local tag="$1"
-	local max_sev=7
-
-	[ -z "$tag" ] && return
-	kmsg_tag_already_processed "$tag" && return
-
-	if [ -c "/dev/kmsg" ]; then
-		append_conf "[INPUT]"
-		append_conf "    name       kmsg"
-		append_conf "    tag        $tag"
-
-		# check kern facility (0)
-		if [ "$all_facilities" -eq 1 ] || [ "$kern_facility" -eq 1 ]; then
-			if [ "$severities" != "none" ]; then
-				# severity filtering
-				# only EqualOrHigher is supported by Prio_Level
-				# and only Log action is supported
-				# so set Prio_Level = max severity
-				if [ "$sev_action" = "0" ] && [ "$sev_compare" = "1" ]; then
-					if [ -n "$severities" ]; then
-						max_sev=$(echo $severities | tr ' ' '\n' | sort -n | tail -1)
-					fi
-
-					append_conf "    prio_level $max_sev"
-				fi
-			fi
-		fi
-
-		append_conf ""
-
-		# if severities is none, or
-		# if kern facility has been excluded
-		# then we need to stop kernel logs
-		# sev_action and sev_compare is being checked because we don't want to work with rules that exclude logs
-		if [ "$severities" = "none" ] || { [ "$kern_facility" -eq 0 ] && [ "$all_facilities" -eq 0 ] && [ "$sev_action" = "0" ] && [ "$sev_compare" = "1" ]; }; then
-			# block all
-			# create a filter section that matches on KM* tag
-			# and excludes all messages
-			create_filter_section "KM*" "0"
-			append_conf "    exclude    message ^.*$"
-			append_conf ""
-		fi
-	fi
-}
-
-generate_syslog_filter() {
-	local param="regex"
-
-	[ "$sev_action" = "1" ] && param="exclude"
-
-	# start adding the fluent-bit filter section
-	create_filter_section "SL*" "0"
-
-	if [ "$severities" = "none" ]; then
-		append_conf "    exclude    pri ^.*$"
+	if [ "$facility_level" == "24" ]; then
+		# value 24 means all facility level, which is as good as not
+		# generating a filter section, so return
 		return
 	fi

-	for fval in $facilities; do
-		for sval in $severities; do
-			local pri=$((fval * 8 + sval))
-			append_conf "    $param        pri ^${pri}$"
+	# facility_level is a list value, hence, generate regex for
+	# each value
+	IFS=" "
+	for val in $facility_level; do
+		# as per rfc 5424 and 3164, pri in syslog msg is
+		# facility*8+severity. Severity value can range from 0-7 hence
+		# generate regex for each.
+		for sval in 0 1 2 3 4 5 6 7; do
+			pri=`expr $val \* 8 + $sval`
+			echo "    regex        pri $pri" >> ${TMP_CONF_FILE}
 		done
 	done
-
-	append_conf ""
 }

-generate_pattern_filter() {
-	local match_regex="$1"
-	local match_pattern="$2"
+generate_severity_regex() {
+	local sev_level="$1"
+	local sev_compare="$2"
+	local sev_action="$3"

-	[ -z "$match_regex" ] && return
-	[ -z "$match_pattern" ] && return
+	local pri=0
+	local param="exclude"

-	# start adding the fluent-bit filter section
-	create_filter_section "$match_regex" "1"
-	append_conf "    regex        message $match_pattern"
-	append_conf ""
+	if [ "$sev_action" == "0" ]; then
+		param="regex"
+	fi
+
+	local fval=0
+	if [ "$sev_compare" == "0" ]; then
+		# generate regex for all facility values, with severity=sev_level
+		while [ $fval -le 23 ] ; do
+			pri=`expr $fval \* 8 + $sev_level`
+			echo "    $param        pri $pri" >> ${TMP_CONF_FILE}
+			fval=$((fval + 1))
+		done
+	elif [ "$sev_compare" == "1" ]; then
+		# generate regex for all severity value greater than or equal to
+		# sev_level. please, lower value have higher precedence, so sev_level
+		# 0 which is emergency has higher precedence than error which is 3
+		while [ $fval -le 23 ] ; do
+			sval=0
+			while [ $sev_level -ge $sval ]; do
+				pri=`expr $fval \* 8 + $sval`
+				echo "    $param        pri $pri" >> ${TMP_CONF_FILE}
+				sval=$((sval + 1))
+			done
+			fval=$((fval + 1))
+		done
+	fi
+}
+
+handle_filter_conf() {
+	local section="$1" # config filter
+	local filter_name="$2"
+	local name
+
+	# no need to proceed if name of filter section is not one of the values
+	# listed in option filter in config action section
+	config_get name $section name
+	if [ "$name" != "$filter_name" ]; then
+		return
+	fi
+
+	# as per data model, at a time either facility_level or severity_level can
+	# be specified along with pattern_match. hence, first process and generate
+	# regex for pattern_match which is common in both condition. Next, we will
+	# process facility_level and return if facility level is defined and not
+	# process severity related params at all.
+
+	local pattern_match
+	config_get pattern_match $section pattern_match
+	if [ -n "$pattern_match" ]; then
+		echo "    regex        $pattern_match" >> ${TMP_CONF_FILE}
+	fi
+
+	local facility_level
+	config_get facility_level $section facility_level
+
+	if [ -n "$facility_level" ]; then
+		generate_facility_regex $facility_level
+		# return from here since if facility_level is defined, then no
+		# need to process severity_level
+		return
+	fi
+
+	local sev_level
+	local sev_compare
+	local sev_action
+	config_get sev_level $section severity_level
+
+	if [ -n "$sev_level" ]; then
+		# value 1 of severity compare corresponds to data model
+		# and system default which is EqualorHigher
+		config_get sev_compare $section severity_compare 1
+		# value 0 of severity action corresponds to data model
+		# and system default that is log
+		config_get sev_action $section severity_action 0
+
+		generate_severity_regex $sev_level $sev_compare $sev_action
+	fi
+}
+
+create_filter_section() {
+	local match="$1"
+
+	echo "[FILTER]" >> ${TMP_CONF_FILE}
+	echo "    name        grep" >> ${TMP_CONF_FILE}
+	echo "    match       $match" >> ${TMP_CONF_FILE}
+	echo "    logical_op  or" >> ${TMP_CONF_FILE} # handle multiple filters
+}
+
+handle_filter_ref() {
+	local filter_name="$1"
+	config_foreach handle_filter_conf filter "$filter_name"
 }

 handle_log_file() {
 	local section="$1" # out_file section
-	local linker="$2"
-	local match_regex="$3"
-	local template="$4"
+	local match="$2"
 	local action_ref

 	config_get action_ref $section action
-	if [ "$action_ref" != "$linker" ]; then
+	if [ "$action_ref" != "$match" ]; then
 		return
 	fi

 	local enabled
-	config_get_bool enabled $section enable
-	if [ "$enabled" = "0" ]; then
+	config_get enabled $section enable
+	if [ "$enabled" == 0 ]; then
 		return
 	fi

 	local file
 	config_get file $section file
-	if [ -z "$file" ] || [ -z "$match_regex" ]; then
+	if [ -z "$file" ]; then
 		return
 	fi

-	append_conf "[OUTPUT]"
-	append_conf "    name         file"
-	append_conf "    workers      2"
-	append_conf "    match_regex  $match_regex"
-	append_conf "    file         $file"
-
-
-	if [ -n "$template" ]; then
-		append_conf "    format       template"
-		append_conf "    template     ${template}"
-	fi
-
-	append_conf ""
+	echo "[OUTPUT]" >> ${TMP_CONF_FILE}
+	echo "    name         file" >> ${TMP_CONF_FILE}
+	echo "    match        $match" >> ${TMP_CONF_FILE}
+	echo "    file         $file" >> ${TMP_CONF_FILE}
+	echo "    format       template" >> ${TMP_CONF_FILE}
+	echo "    template     {time} {hostname} {ident}: {message}" >> ${TMP_CONF_FILE}
 }

 handle_log_remote() {
 	local section="$1"
-	local linker="$2"
-	local match_regex="$3"
+	local match="$2"
 	local action_ref

 	config_get action_ref $section action
-	if [ "$action_ref" != "$linker" ]; then
+	if [ "$action_ref" != "$match" ]; then
 		return
 	fi

 	local enabled
-	config_get_bool enabled $section enable
-	if [ "$enabled" = "0" ]; then
+	config_get enabled $section enable
+	if [ "$enabled" == 0 ]; then
 		return
 	fi

@@ -336,167 +228,83 @@ handle_log_remote() {
 		return
 	fi

-	append_conf "[OUTPUT]"
-	append_conf "    name         syslog"
-	append_conf "    match_regex  $match_regex"
-	append_conf "    host         $address"
+	echo "[OUTPUT]" >> ${TMP_CONF_FILE}
+	echo "    name         syslog" >> ${TMP_CONF_FILE}
+	echo "    match        $match" >> ${TMP_CONF_FILE}
+	echo "    host         $address" >> ${TMP_CONF_FILE}
 	append_conf "    syslog_appname_key   ident"
 	append_conf "    syslog_procid_key    pid"
 	append_conf "    syslog_message_key   message"
-	append_conf "    syslog_hostname_key  hostname"
+
+	local hostname="$(uci -q get 'system.@system[0].hostname')"
+	if [ -n "${hostname}" ]; then
+		append_conf "    syslog_hostname_preset    ${hostname}"
+	fi

 	local proto # holds value tcp or udp
 	config_get proto ${section} proto
 	if [ -n "$proto" ]; then
 		if [ "$proto" == "tls" ]; then
-			append_conf "    mode         tcp"
-			append_conf "    tls          on"
+			echo "    mode         tcp" >> ${TMP_CONF_FILE}
+			echo "    tls          on" >> ${TMP_CONF_FILE}
 		else
-			append_conf "    mode         $proto"
+			echo "    mode         $proto" >> ${TMP_CONF_FILE}
 		fi
 	fi

 	local port
 	config_get port $section port
 	if [ -n "$port" ]; then
-		append_conf "    port         $port"
+		echo "    port         $port" >> ${TMP_CONF_FILE}
 	fi

 	local cert
 	local peer_verify
 	config_get cert $section cert
 	if [ -n "$cert" ]; then
-		append_conf "    tls.crt_file $cert"
+		echo "    tls.crt_file $cert" >> ${TMP_CONF_FILE}

-		config_get_bool peer_verify $section peer_verify
-		if [ "$peer_verify" = "1" ]; then
-			append_conf "    tls.verify     on"
+		config_get peer_verify $section peer_verify
+		if [ "$peer_verify" == "1" ]; then
+			echo "    tls.verify     on" >> ${TMP_CONF_FILE}
 		fi
 	fi
-	append_conf ""
-}
-
-resolve_source_section() {
-	local src_section="$1"
-	local linker="$2"
-	local src_name syslog_en kernel_en
-
-	config_get src_name "$src_section" name
-	[ "$src_name" = "$linker" ] || return
-
-	config_get_bool syslog_en "$src_section" system_messages 1
-	config_get_bool kernel_en "$src_section" kernel_messages 1
-
-	# create an input section using /dev/log or kmsg
-	# and store the tag in a variable
-	# so that later a regex can be made to match this tag
-	# which will be used in output section
-	if [ "$syslog_en" = "1" ]; then
-		source_tag_syslog="SL$src_name"
-		create_input_section "$source_tag_syslog"
-	fi
-
-	if [ "$kernel_en" = "1" ]; then
-		source_tag_kmsg="KM$src_name"
-		create_kmsg_input_section "$source_tag_kmsg"
-	fi
-}
-
-# get the value of option expression from the relevant section
-resolve_template_section() {
-	local tmpl_section="$1"
-	local tmpl_name
-
-	config_get tmpl_name "$tmpl_section" name
-	[ "$tmpl_name" = "$template_ref" ] || return
-
-	config_get template_expr "$tmpl_section" expression
-
-	[ -n "$template_expr" ] && echo "$template_expr"
-}
-
-# loop over template sections and get the value of option expression from the relevant section
-get_template_expression() {
-	local template_ref="$1"
-	[ -n "$template_ref" ] && config_foreach resolve_template_section template
-}
-
-# build a regex that will match all the tags supplied to this function
-build_match_regex() {
-	local tags="$1"
-	local first=1
-	local regex="^("
-	for tag in $tags; do
-		[ "$first" -eq 1 ] && first=0 || regex="$regex|"
-		regex="$regex$tag"
-	done
-	regex="$regex)\$"
-	echo "$regex"
-}
-
-handle_filter_conf() {
-	local section="$1" # config filter
-	local filter_name="$2"
-	local name
-
-	config_get name $section name
-	[ "$name" = "$filter_name" ] || return
-
-	populate_allowed_logs "$filter_name"
 }

 handle_action() {
-	local tag_regex filter source_ref template_ref source_sec log_template finst
-	local action_section="$1"
-	local source_tag_syslog source_tag_kmsg
+	local section="$1"

-	# shared variables set by populate_allowed_logs
-	match_pattern=""
-	facilities=""
-	all_facilities=0
-	kern_facility=1
-	severities=""
-	sev_compare=1
-	sev_action=0
+	local filter
+	config_get filter $section filter

-	config_get action_name "$action_section" name
-	config_get filter "$action_section" filter
-	config_get source_ref "$action_section" source
-	config_get template_ref "$action_section" template
+	# use config action option name as tag for input
+	local tag
+	config_get tag $section name
+	if [ -z "$tag" ]; then
+		return
+	fi

-	[ -z "$action_name" ] && return
-	[ -z "$source_ref" ] && return
-
-	# read filter section and populate relevant variables
-	# these variables will be used by create_kmsg_input_section
-	# generate_syslog_filter, and generate_pattern_filter functions
+	create_input_section $tag
 	if [ -n "$filter" ]; then
+		# the only fluentbit filter that is useful for the datamodel is
+		# grep. Also, fluentbit does not seem to handle multiple instances
+		# of FILTER of same kind. Hence, each filter section corresponding
+		# to an action entry in the uci would translate for us into a set of
+		# regex/exclude values instead of individual FILTER section per uci
+		# section filter is a list, treat according
+		create_filter_section $tag
+
+		IFS=" "
 		for finst in $filter; do
-			config_foreach handle_filter_conf filter "$finst"
+			handle_filter_ref $finst
 		done
 	fi

-	# Resolve referenced source sections
-	for source_sec in $source_ref; do
-		config_foreach resolve_source_section source "$source_sec"
-	done
-
-	# build a regex that will match all the sources for this action
-	tag_regex=$(build_match_regex "$source_tag_syslog $source_tag_kmsg")
-
-	if [ -n "$filter" ]; then
-		generate_pattern_filter "$tag_regex" "$match_pattern"
-		generate_syslog_filter
-	fi
-
-	# get the template expression if any is present
-	log_template="$(get_template_expression "$template_ref")"
-
-	# handle output, each action can be associated with an out_log and out_syslog
+	# handle output, each action can be associated with a out_log and out_syslog
 	# section so figure out if any out_log or out_syslog section is associated
 	# with this and action and setup output accordingly.
-	config_foreach handle_log_file log_file "$action_name" "$tag_regex" "$log_template"
-	config_foreach handle_log_remote log_remote "$action_name" "$tag_regex"
+	config_foreach handle_log_file log_file "$tag"
+	config_foreach handle_log_remote log_remote "$tag"
 }

 handle_action_section() {
@@ -512,14 +320,13 @@ logmngr_init() {

 	create_config_file
 	create_service_section
-	create_default_filters
 	handle_action_section

 	if [ -f /lib/logmngr/logrotate.sh ]; then
 		logrotate_init
 	fi

-	if [ "$enabled" = "0" ]; then
+	if [ "$enabled" == "0" ]; then
 		return
 	fi

@@ -533,4 +340,9 @@ logmngr_init() {
 	fi
 	procd_set_param respawn
 	procd_close_instance
+
+	procd_open_instance klogd
+	procd_set_param command /usr/libexec/logmngr-klogd
+	procd_set_param respawn
+	procd_close_instance
 }
--- a/logmngr/files/lib/logmngr/logrotate.sh
+++ b/logmngr/files/lib/logmngr/logrotate.sh
@@ -4,14 +4,11 @@

 LOGROTATE_FILE=/etc/logrotate.conf
 LOGROTATE_TMP_FILE=/tmp/logrotate/logrotate.conf
-CONF_DIR=/etc/logrotate.d

 create_logrotate_file() {
 	mkdir -p /tmp/logrotate
 	rm -f ${LOGROTATE_TMP_FILE}
 	touch ${LOGROTATE_TMP_FILE}
-	echo -e "include ${CONF_DIR}" >> ${LOGROTATE_TMP_FILE}
-	echo -e "" >> ${LOGROTATE_TMP_FILE}
 }

 handle_logrotate() {
--- a/logmngr/files/logmngr-klogd
+++ b/logmngr/files/logmngr-klogd
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+until [ -S /dev/log ]; do
+	sleep 1
+done
+
+exec /sbin/klogd -n
--- a/logmngr/files/etc/init.d/logmngr
+++ b/logmngr/files/etc/init.d/logmngr
@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common

-START=09
+START=12

 USE_PROCD=1

--- a/loop-detector/Makefile
+++ b/loop-detector/Makefile
@@ -13,7 +13,7 @@ PKG_SOURCE_VERSION:=d0fb770eacd6691b98df138b60f5116e02f71a9b
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/loop-detector

-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.zst
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
--- a/map-agent/Config.in
+++ b/map-agent/Config.in
@@ -55,20 +55,12 @@ config AGENT_OPER_CHANNEL_CHANGE_RELAY_MCAST
 config AGENT_USE_LIBDPP
 	bool "Depend on libdpp for DPP EasyConnect"

-config AGENT_ZEROTOUCH_DPP
-	bool "Enable Zero-touch DPP bootstrapping. Depends on libztdpp.so"
-	default n
-
 config AGENT_CHECK_PARTIAL_WIFI_RELOAD
 	bool "Option that allow SSID/PSK simple reload"
 	default y

-config DYNBH
-	bool "Enable map-agent dynamic Ethernet backhaul management"
-	default n
-
-config DYNBH_DYNAMICALLY_PERSIST_CONTROLLER
-	bool "Let map-agent through AP-Autoconfiguration Search and DHCP Discovery determine the controller or agent role"
+config DYNBHD_DYNAMICALLY_PERSIST_CONTROLLER
+	bool "Let dynbhd through AP-Autoconfiguration Search and DHCP Discovery determine the controller or agent role"

 config AGENT_UNASSOC_STA_CONT_MONITOR
 	bool "Enable continuos monitoring of unassociated clients"
--- a/map-agent/Makefile
+++ b/map-agent/Makefile
@@ -1,14 +1,13 @@
 #
-# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis Sweden AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #

 include $(TOPDIR)/rules.mk

 PKG_NAME:=map-agent
-PKG_VERSION:=6.5.0.10
+PKG_VERSION:=6.3.5.6
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=1a9763bd4e520975e6951f77e85f369487cf1318
+PKG_SOURCE_VERSION:=36caa3955e89ffc504710873a83901b20c717320
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>

 PKG_LICENSE:=BSD-3-Clause
@@ -27,7 +26,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/map-agent
  SECTION:=utils
  CATEGORY:=Utilities
-  TITLE:=Wi-Fi Multi-AP Agent (EasyMesh R6)
+  TITLE:=WiFi multi-AP Agent (EasyMesh R2)
  DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
 	   +ieee1905-map-plugin +ip-bridge +AGENT_USE_LIBDPP:libdpp \
 	   +uuidgen +openssl-util +!TARGET_brcmbca:ebtables-legacy \
@@ -38,12 +37,21 @@ ifeq ($(CONFIG_AGENT_USE_LIBDPP),y)
  TARGET_CFLAGS += -DUSE_LIBDPP
 endif

-ifeq ($(CONFIG_AGENT_ZEROTOUCH_DPP),y)
-  TARGET_CFLAGS += -DZEROTOUCH_DPP
-endif
+define Package/dynbhd
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Dynamic Backhaul Daemon
+  DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
+	  +ieee1905-map-plugin +map-agent
+endef
+

 define Package/map-agent/description
-  This package provides EasyMesh R6 compliant Wi-Fi Multi-AP Agent.
+ This package implements EasyMesh R2 compliant WiFi Agent.
+endef
+
+define Package/dynbhd/description
+ Dyanmic LAN/WAN port detection and loop avoidance.
 endef

 define Package/map-agent/config
@@ -103,11 +111,7 @@ ifeq ($(CONFIG_AGENT_CHECK_PARTIAL_WIFI_RELOAD),y)
 TARGET_CFLAGS += -DCHECK_PARTIAL_WIFI_RELOAD
 endif

-ifeq ($(CONFIG_DYNBH),y)
-TARGET_CFLAGS += -DDYNBH
-endif
-
-ifeq ($(CONFIG_DYNBH_DYNAMICALLY_PERSIST_CONTROLLER),y)
+ifeq ($(CONFIG_DYNBHD_DYNAMICALLY_PERSIST_CONTROLLER),y)
 TARGET_CFLAGS += -DPERSIST_CONTROLLER
 endif

@@ -120,10 +124,6 @@ MAKE_PATH:=src
 define Package/map-agent/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
-ifeq ($(CONFIG_DYNBH),y)
-	$(RM) $(1)/etc/hotplug.d/ethernet/map-dynamic-backhaul
-	$(RM) $(1)/etc/hotplug.d/ethernet/map-topology-discovery
-endif
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/lib/wifi
@@ -131,6 +131,15 @@ endif
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef

+define Package/dynbhd/install
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/lib/wifi/dynbhd
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/ethernet
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/dynbhd $(1)/usr/sbin/dynbhd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/api $(1)/lib/wifi/dynbhd/api
+#	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/map-dynamic-backhaul $(1)/etc/hotplug.d/ethernet/map-dynamic-backhaul
+endef

 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -139,3 +148,4 @@ endef
 endif

 $(eval $(call BuildPackage,map-agent))
+$(eval $(call BuildPackage,dynbhd))
--- a/map-agent/files/etc/config/mapagent
+++ b/map-agent/files/etc/config/mapagent
@@ -17,7 +17,7 @@ config dynamic_backhaul
 	option missing_bh_reconfig_timer '1800'

 config controller_select
-	option mode 'auto'
+	option id 'auto'
 	option probe_int '20'
 	option retry_int '9'
 	option autostart '1'
--- a/Show More
+++ b/Show More