qosmngr: handled qos reload, statistics reset

hanlded the qos reload without statistics reset.
shaping , classification or policer change and qos reload should
not cause queue reset in driver that was causing statistics of that queue
reset to 0. qos reload if trigerred with queue specific config change,in
that case only statistics will reset tot 0.

ated/Makefile

@@ -1,77 +0,0 @@
-/* 
- * Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,27 +1,31 @@
-if PACKAGE_libbbfdm
-
-config LIBBBFDM_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Compile with tr181 device features"
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
 	default y
 
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
 config BBF_TR104
-	bool "Compile with tr104 voice features"
+	bool "Enable TR-104 Data Model Support"
 	default y
 
 config BBF_TR143
-	bool "Compile with tr143 diagnostics features"
+	bool "Enable TR-143 Data Model Support"
 	default y
 
-config BBF_TR157
-	bool "Compile with tr157 bulkdata collector features"
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
 	default y
-	
-config BBF_TR064
-	bool "Compile with tr064 features"
-	default n
 
-endif
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default y
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255

bbf/Makefile

@@ -1,87 +1,181 @@
 #
-# Copyright (C) 2019 Iopsys
+# Copyright (C) 2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=1.0-2019-10-01
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_VERSION:=6.7.5
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b3bae9df19df35075ac52f53758288d8e0573790
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=4ed1dfffc30d1635563d61ede0204febf14dc12d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_MIRROR_HASH:=skip
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_LICENSE:=GPLv2
+PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
+  ABI_VERSION:=1.0
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api
+endef
 
 define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
 endef
 
 define Package/libbbfdm/config
 	source "$(SOURCE)/Config_bbfdm.in"
 endef
 
-define Package/libbbfdm/description
- Test description will update later.
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
 endef
 
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
 
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
 endif
 
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
+
 ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
 endif
 
-ifeq ($(CONFIG_BBF_TR157),y)
-CONFIGURE_ARGS += \
-	--enable-tr157
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
+
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
 endif
 
-ifeq ($(CONFIG_BBF_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-tr064
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
 endif
 
-define Package/libbbfdm/install
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
+define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
 endef
 
+define Package/libbbfdm/default/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
+endef
+
+define Package/libbbfdm/default/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
 define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
 endef
 
+$(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bulkdata/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2022 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulkdata
+PKG_VERSION:=2.0.8
+
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+PKG_SOURCE_VERSION:=be565bd5b7bf91c81a824601235f68b11e6ea308
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -0,0 +1,6 @@
+
+config bulkdata 'bulkdata'
+	option enable '0'
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	option log_level '3'
+

bulkdata/files/etc/init.d/bulkdatad

@@ -0,0 +1,31 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=10
+
+USE_PROCD=1
+PROG="/usr/sbin/bulkdatad"
+
+start_service() {
+	local enable
+
+	config_load bulkdata
+	config_get_bool enable bulkdata enable 1
+
+	procd_open_instance bulkdata
+	[ "$enable" -eq "1" ] && {
+		procd_set_param command "$PROG"
+		procd_set_param respawn "3" "7" "0"
+	}
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start 
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger bulkdata
+}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata.${section}.profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

bulut/Makefile

@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulut
+PKG_VERSION:=0.2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
+PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bulut
+	CATEGORY:=Utilities
+	DEPENDS:=
+	TITLE:=bulut
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include
+
+define Package/bulut/description
+	obuspa keys
+endef
+
+define Package/bulut/install
+	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,bulut))

catv/files/etc/init.d/catv

@@ -1,7 +1,4 @@
 #!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2015 inteno.org
-#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crashlog
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crashlog
-  CATEGORY:=Utilities
-  TITLE:=Handling kernel crash logs
-endef
-
-define Package/crashlog/description
-	Handling kernel crash logs.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/crashlog/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -1,11 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-
-start()
-{
-    if [ -e /proc/sys/kernel/core_pattern ]
-    then
-	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
-    fi
-}

crashlog/files/etc/init.d/crashlog

@@ -1,56 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-send_log()
-{
-	nr=$(db get hw.board.serialNumber)
-	hw=$(db get hw.board.hardware)
-	hwv=$(db get hw.board.hardwareVersion)
-	bid=$(db get hw.board.boardId)
-	sw=$(db get hw.board.iopVersion)
-	server=$(/sbin/uci get system.crashlog.server)
-
-	while true
-	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
-	    if [ $? == 0 ]
-	    then
-	       break;
-	    fi
-	    # wait for another minute then try again
-	    sleep 60
-	done
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=crashlog
-    /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crash.inteno.se"
-    /sbin/uci commit
-}
-
-boot()
-{
-    # is crashlog enabled ?
-    enable=$(/sbin/uci get system.crashlog.enable)
-    case $enable in
-	0|no|NO|false|FALSE)
-	    exit 0
-	    ;;
-	"")
-	    fill_in_default
-	    exit 0
-	    ;;
-    esac
-
-    # is this boot a result from a crash ?
-    reason=$(cat /etc/boot_reason)
-    case $reason in
-	HW|WD)
-	    send_log&
-	    ;;
-    esac
-}

crashlog/files/sbin/logcore

@@ -1,61 +0,0 @@
-#! /bin/sh
-
-TMP_CORE=/tmp/new_core
-# first test if we can contact the log server.
-# if not abort directly the core file takes up memory
-alive()
-{
-	ping -c1 $server
-
-	if [ $? != 0 ]
-	then
-		# drain core file from kernel
-		cat >/dev/null
-		exit 0
-	fi
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=corelog
-    /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="crash.inteno.se"
-    /sbin/uci commit
-}
-
-# is corelog enabled ?
-enable=$(/sbin/uci get system.corelog.enable)
-case $enable in
-    0|no|NO|false|FALSE)
-	# drain core file from kernel
-	cat >/dev/null
-	exit 0
-	;;
-    "")
-	fill_in_default
-	exit 0
-	;;
-esac
-
-server=$(/sbin/uci get system.corelog.server)
-
-alive
-
-# dump out the core to disk we need this as scp needs a size before we send data
-# and this is the only way to know how much data there is
-cat >$TMP_CORE
-
-# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
-# more memory to work with. normally this would do nothing.
-cat >/dev/null
-
-nr=$(db get hw.board.serialNumber)
-hw=$(db get hw.board.hardware)
-hwv=$(db get hw.board.hardwareVersion)
-bid=$(db get hw.board.boardId)
-sw=$(db get hw.board.iopVersion)
-
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
-rm $TMP_CORE
-

crashlog/files/usr/sbin/logssh

@@ -1,6 +0,0 @@
-#!/bin/sh
-# we need to have the -y option to dropbear to not halt the scp when
-# transfering the log file to a new server for the first time.
-# since we already need this also put in the keyfile
-
-ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -1,42 +0,0 @@
-Install scp server.
-
-Create a user account on a server and make sure it's possible to login to it
-using ssh.
-
-For now the user has to be called "log"
-
-USER is the user name of the account
-HOME is the user home directory.
-Both should be changed to the correct value in all following example commands.
-
-create HOME/bin
-Put scp_upload in HOME/bin
-make it executable "chmod a+x HOME/bin/scp_upload" 
-
-create home/.ssh   (observer the dot .shh)
-
-create an empty file HOME/.ssh/authorized_keys
-
--------------------------------
-Now everyhting is setup for use but we have not added any clients.
-What we need is the public key for the clients.
-
-For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
-
-----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
-----------
-
-The public key should be just one line. Add that line to the 
-HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
-the first text on the same line. that is insert before the key data.
-
-command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
-
-Do not forget to change HOME to the correct value for the server and there 
-should be one space separating the key data and the above text.
----------------------------------
-Now test to make sure that you can upload new files, not download files
-and not overwrite files from the client.
-
-

crashlog/scp_upload

@@ -1,53 +0,0 @@
-#! /bin/bash
-# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
-
-val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
-if [ $val != 3 ]
-then
-    echo "only scp is allowed for this rsa key"
-    exit 1
-fi
-
-#strip out "scp" as getopts barf on anything not an option
-
-args=${SSH_ORIGINAL_COMMAND:3}
-
-# we must set args to positional paramters otherwise it's next to impossible
-# to get to the rest of the line that is not arguments.
-
-set -- $args
-while getopts "rftdvpq" Option
-do
-  case $Option in
-    r ) echo "recursive not allowed";exit 1;;
-    f ) echo "reading files not allowed";exit 1;;
-    t ) ;;
-    d ) ;;
-    v ) ;;
-    p ) ;;
-    q ) ;;
-    * ) ;;   # Default.
-  esac
-done
-
-shift $(($OPTIND - 1))
-
-file="$*"
-dir=$(dirname "$file")
-
-if [ "$dir" != "log" ]
-then
-    echo "only allowed to write to log/"
-    exit 1
-fi
-
-# try to create uniq files
-EXTRA=$((0))
-while [ -e "${file}_${EXTRA}" ]
-do
-    EXTRA=$((EXTRA +1))
-done
-
-logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
-
-exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Config.in

@@ -0,0 +1,11 @@
+if PACKAGE_dectmngr
+
+menu "Configuration"
+
+config ENABLE_LINE_SETTINGS_EXTENSION
+	bool "Enable Line Settings List extension "
+	default y
+
+endmenu
+
+endif

dectmngr/Makefile

@@ -0,0 +1,74 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dectmngr
+PKG_RELEASE:=3
+PKG_VERSION:=3.5.5
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=cf4e91ffe0a1d83140fef5b41d16e581e5341cec
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+ 	TITLE:=DECT Manager
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
+endef
+
+define Package/$(PKG_NAME)/description
+	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
+endef
+
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-Wall \
+        -Werror \
+	-I$(STAGING_DIR)/usr/include/libxml2
+
+ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
+TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
+endif
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/dectmngr
+	$(CP) ./files/etc/* $(1)/etc/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'global'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -0,0 +1,100 @@
+#!/bin/sh /etc/rc.common
+
+source /lib/functions/uci-defaults.sh
+
+START=70
+STOP=12
+
+USE_PROCD=1
+NAME=dectmngr
+PROG=/usr/sbin/dectmngr
+LOG_PATH=/var/log/dectmngr
+DB_PATH=/etc/dect
+
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
+
+# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
+stop_and_wait_dectmngr() {
+	pidof $NAME && killall -q $NAME
+
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
+		sleep 1
+	done
+}
+
+start_service() {
+	local opt_ext=
+	local rfpi=
+	local model_id=
+	local rxtun=
+
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+
+	rfpi=$(db -q get hw.board.dect_rfpi)
+	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
+
+	model_id=$(db -q get hw.board.dect_model_id)
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
+		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
+		model_id="30.3B.06"
+	}
+	opt_ext="$opt_ext -model $model_id"
+
+	rxtun=$(db -q get hw.board.dect_rxtun)
+	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+
+	config_load dect
+	config_get log_dect_cmbs global log_dect_cmbs syslog
+
+	procd_open_instance
+	if [ "$log_dect_cmbs" = "none" ]; then
+		echo "Starting dectmngr with cmbs logging disabled"
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
+		rm -f $LOG_PATH/*
+	elif [ "$log_dect_cmbs" = "file" ]; then
+		echo "Starting dectmngr with cmbs logging enabled to file"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
+		echo "Starting dectmngr with cmbs logging enabled to syslog"
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
+		rm -f $LOG_PATH/*
+	fi
+
+	procd_set_param respawn 6 2 3
+	procd_set_param term_timeout 20
+	procd_set_param triggers asterisk
+	procd_close_instance
+}
+
+stop_service() {
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	stop_and_wait_dectmngr
+}
+
+reload_service() {
+	ubus call dect reload
+}
+
+service_triggers()
+{
+	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
+	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+}
+
+boot() {
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
+
+	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
+	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
+	start
+}
+

dectmngr/files/lib/upgrade/keep.d/dect

@@ -0,0 +1 @@
+/etc/dect/LA_DB

dectmngr2/Makefile

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
-PKG_NAME:=dectmngr2
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dectmngr2
-  CATEGORY:=Utilities
-  TITLE:=Dectmngr2
-  URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
-endef
-
-define Package/dectmngr2/description
-	Dectmngr2
-endef
-
-
-define Package/dectmngr2/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
-	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-endef
-
-$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

dslmngr/Makefile

@@ -8,14 +8,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -25,16 +26,8 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -45,7 +38,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
 endef
 
 define Package/dslmngr/description
@@ -56,6 +49,7 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(STAGING_DIR)/usr/include/xdsl \
 	-D_GNU_SOURCE
 
 MAKE_FLAGS += \

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
+  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet)
 endef
 
 define Package/easy-qos/description
@@ -39,11 +39,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,165 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string:none' \
-		'macaddr:string:none' \
-		'proto:string:none' \
-		'port:list(uinteger):none' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-	if [ "${ports}" != "none" ]; then
-		IFS=","
-		for port in ${ports};
-		do
-			cmd="--dport ${port}:${port} ${cmd}";
-		done
-		IFS=' '
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_log classcfg ${cmd} 
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -103,18 +103,18 @@ validate_rule_section()
 
 # Clear existing rules before applying new rules
 clear_existing_rules() {
-	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
 	while [ -n "${rule}" ]; do
 		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
 	done
 }
 
 check_and_create() {
-	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
 	# Create rule if not exists
 	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A OUTPUT ${@}
+		exec_log iptables -t mangle -A PREROUTING ${@}
 	else
 		log "Rule exists for ${@}"
 	fi

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -4,7 +4,5 @@ uci -q batch <<-EOT
         set firewall.easyqos=include
         set firewall.easyqos.path=/etc/firewall.easyqos
         set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
         commit firewall
 EOT

easy-soc-events/Makefile

@@ -0,0 +1,110 @@
+# All rights reserved.
+# See LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=easy-soc-events
+PKG_VERSION:=1.1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
+PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+
+include $(INCLUDE_DIR)/package.mk
+
+-include $(TOPDIR)/.config
+
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
+  LINUX_VERSION := 4.1.52
+  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
+  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
+  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
+  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
+  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
+endif
+
+
+define KernelPackage/easy-soc-events/default
+  SUBMENU:=Other modules
+endef
+
+define KernelPackage/easy-soc-events
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Helper module for netlink event notification
+  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
+  AUTOLOAD:=$(call AutoLoad,11,easyevent)
+endef
+
+define KernelPackage/easy-soc-events-test
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Test module for event notification through easyevent
+  DEPENDS+=+kmod-easy-soc-events
+  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
+endef
+
+
+define KernelPackage/easy-soc-events/description
+  This is a helper module to generate and pass netlink events from
+  kernel to user applications.
+endef
+
+#NOSTDINC_FLAGS :=
+
+ifdef CONFIG_PACKAGE_kmod-easy-soc-events
+  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
+endif
+
+LINUXINCLUDE += \
+		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
+		-Iarch/$(LINUX_KARCH)/include \
+		-Iarch/$(LINUX_KARCH)/include/generated \
+		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
+		-I$(LINUX_DIR)/include/generated/uapi \
+		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
+		-include ./include/linux/kconfig.h
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+endef
+
+define Build/Compile
+	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) V=1 \
+		$(PKG_MAKE_FLAGS) \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		LINUXINCLUDE="$(LINUXINCLUDE)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		modules
+endef
+
+
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+define KernelPackage/easy-soc-events/install-extra
+	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
+endef
+endif
+
+define KernelPackage/easy-soc-events/install
+	$(call KernelPackage/easy-soc-events/install-extra)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
+	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
+endef
+
+$(eval $(call KernelPackage,easy-soc-events-test))
+$(eval $(call KernelPackage,easy-soc-events))

easy-soc-libs.deprecated/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_libwifix)
-menu "configurations"
-
-config LIBWIFIX_DEBUG
-	depends on PACKAGE_libwifix
-	bool "Enable wifi debugging"
-	default n
-
-endmenu
-endif

easy-soc-libs.deprecated/Makefile

@@ -1,108 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs.deprecated
-PKG_VERSION:=1.0.1
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b88afddd2f4cb216bfcd190f9096c138299c28e2
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs.deprecated
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries (deprecated)
-  SUBMENU:=IOPSYS easy SoC libraries (deprecated)
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifix/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifix
-  $(call Package/easy-soc-libs.deprecated)
-  TITLE:= WiFi library for wifix (deprecated)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-ifdef CONFIG_LIBWIFIX_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifix),libwifix)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-define Build/InstallDev/libwifix
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifix/wifi.h $(1)/usr/include/wifix.h
-	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default)
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifix/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libwifix))

easy-soc-libs/Config.in

@@ -1,23 +1,5 @@
-if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
-menu "configurations"
+# libeasy configuration
 
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debugging support"
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
 	default n
-
-config LIBWIFI_DEBUG
-	depends on PACKAGE_libwifi
-	bool "Enable wifi debugging"
-	default n
-
-config LIBDSL_DEBUG
-	depends on PACKAGE_libdsl
-	bool "Enable xdsl debugging"
-	default n
-
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
-endmenu
-endif

easy-soc-libs/Makefile

@@ -1,22 +1,23 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
-# 
+#
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.4.0
+PKG_VERSION:=6.7.5
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=30f5527ae724d54537c803127e11992d1a5ae154
+PKG_SOURCE_VERSION:=6a7dcbfe7ce41e87a7528b63cf12e67078231629
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -29,66 +30,62 @@ include $(INCLUDE_DIR)/package.mk
 define Package/easy-soc-libs
   SECTION:=libs
   CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries
-  SUBMENU:=IOPSYS easy SoC libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
   DEPENDS:=+libopenssl
   MENU:=1
 endef
 
-define Package/libwifi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_WIFI_TYPE=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
 else
-  $(info Unexpected CONFIG_TARGET)
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
-endef
+export TARGET_WIFI_TYPE
 
 subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
@@ -100,6 +97,7 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)
@@ -108,57 +106,36 @@ define Build/Prepare
 endef
 endif
 
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
 
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
 endef
+endif
 
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
 
 define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
 	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
 endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
 endef
 
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+define Package/easy-soc-libs/install
+	:
 endef
 
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_econet:ecnt_api
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

endptmngr/Makefile

@@ -6,33 +6,32 @@
 #
 include $(TOPDIR)/rules.mk
 
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=631e61b7ab5d86f2f4c86756a117badff9fb0f2c
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=0901382048bb7ce01fc1767fef75e54692f56743
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 endif
 
-RSTRIP:=true
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
 
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
+export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -42,27 +41,28 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Brcmslic
+  TITLE:=Broadcom Voice Endpoint Manager
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
 endef
 
 define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
 endef
-
 endif
 
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
 
 define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2020 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ethmngr
+PKG_VERSION:=2.0.1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ethmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Ethernet status and configration utility
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+endef
+
+define Package/ethmngr/description
+ This package can be used to configure and provide status about
+ the ethernet interfaces and ports through UBUS.
+ It uses APIs from the libethernet.so library.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+define Package/ethmngr/install
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,ethmngr))

ethmngr/files/ethmngr.init

@@ -4,12 +4,11 @@ START=95
 STOP=10
 
 USE_PROCD=1
-PROG=/usr/sbin/wifimngr
+PROG=/usr/sbin/ethmngr
 
 start_service() {
 	procd_open_instance
 	procd_set_param command ${PROG}
-#	procd_set_param env IOP_LLA_LIBS_DEBUG=3    #for debugging only
 	procd_set_param respawn
 	procd_close_instance
 }

evoice/Makefile

@@ -0,0 +1,106 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.38
+
+LOCAL_DEV=0
+LOCAL_DEV_EVOICE_DIR=~/voip/evoice
+
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=8ffed73a755909cdf70d7050c98ce0f407621860
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
+		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
+		+TARGET_iopsys_econet:kmod-voip_driver\
+		+TARGET_iopsys_econet:voip_app +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+define Build/Prepare
+	@echo "======================================================="
+	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
+	@echo "======================================================="
+	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+IDIR = $(STAGING_DIR)/usr/include
+TONES_INI_REQUIRED=
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	TARGET_PLATFORM=BROADCOM
+	BDIR = bcm963xx/userspace/private/apps/voice
+	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
+		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
+		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+	TRG=SVrgBcmFxs
+	JSONFILE=codecs_brcm.json
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+	TARGET_PLATFORM=ECONET
+	TONES_INI_REQUIRED=y
+	TRG=SVrgMtekOwrt
+	JSONFILE=codecs_airoha.json
+endif
+
+# disable temporarily some not important warnings, force PIC
+CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
+
+export TARGET_PLATFORM
+
+#used and altered by BIDE makefiles
+export _XFLAGS
+
+BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
+	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
+
+	@echo "clean libvoiceservice before building shared lib!"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
+	$(RM) $(1)/lib/voice/codecs_brcm.json
+	$(RM) $(1)/lib/voice/codecs_airoha.json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,334 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option AcceptFromProxyOnly '0'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	option SIPSessionTimerEnable '0'
+	option SIPSessionExpireInterval '1800'
+	option SIPSessionMinimumTimer '90'
+	option SIPSessionRefresher 'NONE'
+	option SIPSessionTimerMode 'REQUEST'
+	option SIPSessionRefreshRequest 'UPDATE'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'G.711ALaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'G.711MuLaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'G.726'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'G.722'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'G.729'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '0'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '2PrefixInfo1'
+	list PrefixList '2PrefixInfo2'
+	list PrefixList '2PrefixInfo3'
+	list PrefixList '2PrefixInfo4'
+	list PrefixList '2PrefixInfo5'
+	list PrefixList '2PrefixInfo6'
+	list PrefixList '2PrefixInfo7'
+	list PrefixList '2PrefixInfo8'
+	list PrefixList '2PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '3PrefixInfo1'
+
+config PrefixInfo '2PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,181 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option HW_VoiceDSP 'hw.board.VoiceDSP'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable                'voice.Network@.Enable'
+   option Registration_Server   'voice.Network@.RegistrarServer'
+   option Outbound_Proxy        'voice.Network@.ProxyServer'
+   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
+   option SIP_Port              'voice.Network@.RegistrarServerPort'
+   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
+   option T1                    'voice.Network@.TimerT1'
+   option UserAgentDomain       'voice.Network@.UserAgentDomain'
+   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
+   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
+   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
+   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
+   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
+   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config fxsinfo 'map_fxs'
+   option Enable 'voice.FXS@.Enable'
+   option DialType 'voice.FXS@.DialType'
+   option TransmitGain 'voice.FXS@.TransmitGain'
+   option ReceiveGain  'voice.FXS@.ReceiveGain'
+   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,56 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+

evoice/files/etc/init.d/evoice

@@ -0,0 +1,32 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=evoice
+VOICE_UCI_CONFIG=voice
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+
+	which endptmngr >/dev/null 2>&1 && {
+		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
+		return
+	}
+
+	procd_open_instance
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger $VOICE_UCI_CONFIG
+}

evoice/files/lib/voice/codecs_airoha.json

@@ -0,0 +1,50 @@
+{
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	]
+}
+

evoice/files/lib/voice/codecs_brcm.json

@@ -0,0 +1,140 @@
+{
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 16000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 40000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.723.1": [
+		{
+			"BitRate": 5300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"iLBC": [
+		{
+			"BitRate": 15200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 13300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 10200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7950,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6700,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5900,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5150,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 4750,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-EFR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-FR": [
+		{
+			"BitRate": 13200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-HR": [
+		{
+			"BitRate": 5600,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	]
+}
+

fdtextract/Makefile

@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fdtextract
+PKG_RELEASE:=1
+PKG_VERSION:=1.0
+
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_MIRROR_HASH:=skip
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+	TITLE:=fdtextract
+	DEPENDS:= +libfdt
+endef
+
+define Package/$(PKG_NAME)/description
+	Command to extract sub images from FIT images.
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/fdtextract
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

gryphon-led-module/Makefile

@@ -28,6 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -40,6 +41,33 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
+	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
+	# and abcdef the git-commit.
+	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
+	# The assignment below removes the part after the - which puts modules in the right directory as
+	# long as the bcmlinux version matches the kernel version in the BCM SDK.
+	# So, this will only stop working in the time window where the BCM SDK has been updated
+	# but bcmlinux has not yet been updated.
+	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
+		# These targets use a 32-bit arm-sfp kernel
+		LINUX_KARCH:=arm
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
+
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -43,12 +43,18 @@
 static ssize_t get_led_color(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	/* [ln] todo: dummy implementation */
 	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
 
-	len = sprintf(buf, "%d\n", 123);
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
 	}
 
 	return len;
@@ -99,8 +105,69 @@ static ssize_t set_led_color(struct device *dev,
 }
 static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
 
+static ssize_t get_led_brightness(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set LED brightness
+ * @retval count number of bytes written
+ * @retval -EINVAL if the message is not a valid hexadecimal number
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_brightness(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	if (kstrtoul(buf, 16, &val)) {
+		return -EINVAL;
+	}
+
+	if(val > SK9822_DEFAULT_BRIGHTNESS) {
+		val = SK9822_DEFAULT_BRIGHTNESS;
+	}
+
+	sk9822->led_brightness = (uint8_t)val;
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
+
+
 static struct attribute *sk9822_dev_attrs[] = {
 	 &dev_attr_led_color.attr,
+	 &dev_attr_led_brightness.attr,
 	 NULL
 };
 
@@ -129,6 +196,8 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_warn(&pdev->dev, "Could not read led-count property\n");
 		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	} else {
+		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
 	}
 
 	leds->led_colors = devm_kzalloc(&pdev->dev,
@@ -140,7 +209,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, leds);
 
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
@@ -148,6 +217,12 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	}
 
 	gpiod_direction_output(leds->clock_gpio, 1);
 	if (IS_ERR(leds->clock_gpio)) {
@@ -160,7 +235,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 		gpiod_set_value(leds->clock_gpio, 0);
 	}
 
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
@@ -168,6 +243,12 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	}
 
 	gpiod_direction_output(leds->data_gpio, 1);
 	if (IS_ERR(leds->data_gpio)) {

icgroupd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=icgroupd
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Inteno Broadband AB
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/icgroupd
-  SECTION:=base
-  CATEGORY:=Base system
-  TITLE:=Inteno cgroup daemon
-  DEPENDS:=+uci +busybox
-endef
-
-define Package/icgroupd/description
-	This package contains Intenos cgroup daemon and associated
-	configuration and startup scripts.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/icgroupd/install
-	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
-
-	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
-	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
-	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,icgroupd))
-

icgroupd/files/cgroupd

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-CGBASEDIR=$1
-CGCONFIG=$2
-[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
-
-[ -r /lib/functions.sh ] || exit 1
-. /lib/functions.sh
-
-CGPROCMAP=/tmp/cgprocmap
-CGPERIOD=3s
-
-DBGLOG=/tmp/cgroupd.log
-DEBUG=0
-
-
-add_to_procmap () {
-	local name_grp=$1
-	local name grp
-
-	name=$(echo $name_grp |awk -F= '{print $1}')
-	grp=$(echo $name_grp |awk -F= '{print $2}')
-
-	echo "($name) $grp" >> $CGPROCMAP
-}
-
-# Read configuration file and create process:group look-up table
-# in /tmp file
-read_config () {
-	local enab
-
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && exit 1
-
-	config_get CGDEFGROUP cgroups defgroup "_undef_"
-	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
-	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
-
-	echo -n '' > $CGPROCMAP
-	config_list_foreach procmap procmap add_to_procmap
-	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
-}
-
-# Move all process except init from cgroup root to cgroups according
-# to /tmp look-up table
-move_wild_procs () {
-	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
-	local pid name grp
-
-	for pid in $wild_procs; do
-
-		[ $pid -eq 1 ] && continue
-		if [ -d /proc/$pid ]; then
-
-			name=$(awk '{print $2}' /proc/$pid/stat)
-			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
-
-			[ "$grp" == "." ] && continue
-			[ -n "$grp" ] || grp=$CGDEFGROUP
-
-			[ "$DEBUG" == "1" ] && \
-			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
-			echo $pid > $CGBASEDIR/$grp/cgroup.procs
-		fi
-	done
-}
-
-
-[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-read_config
-while true; do
-	move_wild_procs
-	sleep $CGPERIOD
-done

icgroupd/files/cgroups.config

@@ -1,48 +0,0 @@
-config cgroups cgroups
-	option enabled 1
-	option defgroup iopsys/normal
-
-config cgroup _root_
-#	list option cpu.rt_runtime_us=50000
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=40000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=30000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=2500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=7500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config procmap procmap
-	list procmap kthreadd=.
-	list procmap minidlna=3prt/normal
-

icgroupd/files/cgroups.init

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-USE_PROCD=1
-PROCD_DEBUG=1
-NAME=cgroupd
-
-CGBASEDIR=/sys/fs/cgroup
-CGCONFIG="cgroups"
-
-DBGLOG=/tmp/cginit.log
-DEBUG=0
-
-
-cgroupinit_set_knob_value () {
-	local knob_val=$1
-	local dir=$2
-	local knob val
-
-	knob=$(echo $knob_val |awk -F= '{print $1}')
-	val=$(echo $knob_val |awk -F= '{print $2}')
-	/bin/echo $val > $CGBASEDIR/$dir/$knob
-	[ "$DEBUG" == "1" ] && \
-	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
-}
-
-cgroupinit_create_group () {
-	local cgrp=$1
-	local dir
-
-	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
-	if [ "$cgrp" == "_root_" ]; then
-		dir=.
-	else
-		dir=$(echo $cgrp |tr '_' '/')
-
-		if [ ! -d $CGBASEDIR/$dir ]; then
-			mkdir $CGBASEDIR/$dir
-			[ "$DEBUG" == "1" ] && \
-			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
-		fi
-	fi
-
-	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
-}
-
-cgroupinit_configure_cgroups () {
-	local enab defgrp
-
-	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && return 1
-
-	config_get defgrp cgroups defgroup "_undef_"
-	[ "$defgrp" == "_undef_" ] && return 1
-
-	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
-		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
-		[ $? -eq 0 ] || return 1
-	fi
-
-	config_foreach cgroupinit_create_group cgroup
-	return 0
-}
-
-start_service () {
-	cgroupinit_configure_cgroups
-	[ $? -eq 0 ] || return
-
-	procd_open_instance
-	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service () {
-	local cgdir procs prc
-
-	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
-		procs=$(cat $cgdir/cgroup.procs)
-		for prc in $procs; do
-			echo $prc > $CGBASEDIR/cgroup.procs
-		done
-		rmdir $cgdir
-	done
-}
-
-service_triggers() {
-        procd_add_reload_trigger $CGCONFIG
-}
-

icwmp/Config_cwmp.in

@@ -1,27 +0,0 @@
-if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
-
-config CWMP_SCRIPTS_FULL
-	bool "Install all icwmp scripts"
-	default y
-
-choice
-	prompt "Select ACS sever"
-	default CWMP_ACS_MULTI
-
-config CWMP_ACS_MULTI
-	bool "No specific ACS, follow standard"
-
-config CWMP_ACS_HDM
-	bool "HDM"
-endchoice
-
-config CWMP_DEBUG
-	bool "Compile with debug options"
-	default y
-
-config CWMP_DEVEL_DEBUG
-	bool "Compile with development debug options"
-	default n
-    
-endif
-

icwmp/Makefile

@@ -1,100 +1,72 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the GNU General Public License v2.
+# This is free software, licensed under the BSD-3-Clause
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-10-01
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_VERSION:=9.0.17
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ed781436f96f2dc3cf58b35adc640c6f9f6783d1
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_VERSION:=280e2f2bc3b2b24057b6d43c53aad41aacb65cc7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_MIRROR_HASH:=skip
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_CWMP_ACS_MULTI \
-	CONFIG_CWMP_ACS_HDM \
-	CONFIG_CWMP_DEBUG \
-	CONFIG_CWMP_DEVEL_DEBUG
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-
-CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp_stun
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 stun Client
-	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
-endef
-
-define Package/icwmp_xmpp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 xmpp feature
-	DEPENDS:=+libuci +libubox +libexpat +libstrophe
-endef
-
-define Package/icwmp_twamp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 twamp feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_udpechoserver
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 udpechoserver feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_bulkdata
- SECTION:=utils
- CATEGORY:=Utilities
- TITLE:=TR-069 BulkData Collection
- DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
-endef
-
-define Package/icwmp/Default
+define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
-  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm +(PACKAGE_libtr098):libtr098
+  SUBMENU:=TRx69
+  TITLE:=TR069 CWMP client
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid
 endef
 
-define Package/icwmp/description
- A free client implementation of CWMP (TR-069) protocol
+define Package/icwmp-openssl
+  $(Package/icwmp/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  VARIANT:=openssl
 endef
 
-define Package/icwmp-curl
-  $(call Package/icwmp/Default)
-  TITLE+= (using libcurl)
-  DEPENDS+= +libcurl
-  VARIANT:=curl
+define Package/icwmp-wolfssl
+  $(Package/icwmp/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
+  CONFLICTS := icwmp-openssl
+  VARIANT:=wolfssl
 endef
 
-define Package/icwmp-zstream
-  $(call Package/icwmp/Default)
-  TITLE+= (using libzstream)
-  DEPENDS+= +libzstream
-  VARIANT:=zstream
+define Package/icwmp-mbedtls
+  $(Package/icwmp/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
+  CONFLICTS := icwmp-openssl icwmp-wolfssl
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
 endef
 
-define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
-endef
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
@@ -103,162 +75,29 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_CFLAGS += -DEX400
-endif
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifneq ($(CWMP_REVISION)_,_)
-ifneq ($(CWMP_REVISION),exported)
-ifneq ($(CWMP_REVISION),Unversioned directory)
-TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-endif
-endif
-endif
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
-ifeq ($(BUILD_VARIANT),zstream)
-CONFIGURE_ARGS += \
-	--enable-http=zstream \
-	--with-zstream-include-path=$(STAGING_DIR)/usr/include
-endif
-
-ifeq ($(BUILD_VARIANT),curl)
-CONFIGURE_ARGS += \
-	--enable-http=curl
-endif
-
-ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
-CONFIGURE_ARGS += \
-	--enable-acs=multi
-endif
-
-ifeq ($(CONFIG_CWMP_ACS_HDM),y)
-CONFIGURE_ARGS += \
-	--enable-acs=hdm
-endif
-
-ifeq ($(CONFIG_CWMP_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-debug
-endif
-
-ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-devel
-endif
-
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-CONFIGURE_ARGS += \
-	--enable-tr098
-endif
-
-CONFIGURE_ARGS += \
-	--enable-tr181
-
-define Package/icwmp-$(BUILD_VARIANT)/install
+define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
-endif
 	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
-	$(INSTALL_DIR) $(1)/usr/share/icwmp
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
-endif
-	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
+	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
+	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
 endef
 
-define Package/icwmp_stun/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
-endef
+Package/icwmp-openssl/install = $(Package/icwmp/default/install)
+Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
+Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
-define Package/icwmp_xmpp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
-endef
-
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
-define Package/icwmp_bulkdata/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
-endef
-
-define Package/icwmp-$(BUILD_VARIANT)/postinst
-	#!/bin/sh
-	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Enabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd enable
-	fi
-	exit 0
-endef
-
-define Package/icwmp-$(BUILD_VARIANT)/prerm
-	#!/bin/sh
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Disabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd disable
-	fi
-	exit 0
-endef
-
-$(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,icwmp_stun))
-$(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
-$(eval $(call BuildPackage,icwmp_bulkdata))
-$(eval $(call BuildPackage,icwmp-zstream))
+$(eval $(call BuildPackage,icwmp-openssl))
+$(eval $(call BuildPackage,icwmp-wolfssl))
+$(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/README

@@ -1,136 +0,0 @@
-1)Build
-    Requirements<74>:
-	librairies:
-	- libuci.so
-	- libexpat.so
-	- libcurl.so
-	- libpthread.so
-	- libopenssl.so
-	- libz.so
-	- libcrypto.so
-	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-	
-	header files and folders:
-	- expat.h
-	- expat_external.h
-	- uci.h
-	- uci_config.h
-	- zlib.h
-	- curl folder
-	- openssl folder
-	the header files and folders should be present in the staging_dir/target-i386_uClibc-0.9.30.1/usr/include/ or staging_dir/toolchain-i386_gcc-4.1.2_uClibc-0.9.30.1/usr/include/
-
-
-if a librairie doesn't exist:
- 	a- run make menuconfig and select the librarie
-	b- build the librarie package
-
-2) Build
-
-this software is composed of 3 packages:
-- icwmp package:  contains icwmpd daemon
-- cwmp lib package: contains cwmplib and contains cwmp_value_change binary. They could be used by other user space applications in order to notify the icwmp daemon when paramter changes
-- cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
-
-The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile 
-
-3) OpenWRT settings
-in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
- uci_set_state provisioning iup tr069url "$url"
- uci_set_state provisioning iup provisioningcode "$provisioningcode"
-
-4) Run
-    Requirements:
-	- libuci package should be installed
-	- libexpat package should be installed
-	- libcurl package should be installed
-	- libpthread package should be installed
-	- libopenssl package should be installed
-	- libz package should be installed
-	- libcrypto package should be installed
-    
-    Configure the acs url in the /etc/config/icwmp
-    and then start the cwmpd service: /etc/init.d/icwmpd start
-    for the help: /etc/init.d/icwmpd
-
-5) Value Change
-
-5.1) value change for user space applications (using the libcwmp)
-
-Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
-The libcwmp should be installed uin the OpenWRT firmware
-
-example of using libcwmp
-in myapplication.c
-
-#...
-#include <cwmp_lib.h>
-#...
-
-int anyfunction ()
-{
-   .....
-   /* parameter change here  */
-   /* so we inform the icwmp: */
-   lib_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
-   .....
-/*
-Description of lib_api_cwmp_value_change_call input parameters
- parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
- parameter 2 : is the parameter path
- parameter 3 : is the first correspondence related to the first indice
- parameter 4 : is the second correspondence related to the second indice
-   .
-   .
-   .
- parameter n : is the (n-2) correspondence related to the (n-2) indice
-*/
-
-}
-
-5.2) value change for user space applications (using the cwmp_value_change CLI)
-
-Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
-The libcwmp should be installed uin the OpenWRT firmware
-
-in OpenWRT:
-
-root@OpenWrt:~# cwmp_value_change InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress "lan2" "3"
-
-in this case the command will force cwmp client to send a notification to the ACS (if and only if the parameter path as configured as active or as passive parameter using the setAttributeParameter method)
-
-5.3) value change for kernel space modules
-Before using the cwmp kernel module for value change, we should check that the kernel module package is selected in "make menu config". and we should check that the package is compiled.
-The kernel module should be installed uin the OpenWRT firmware and should be insert before all other kernel modules
-
-example of using cwmp kernel module
-in mykernelmodule.c
-
-#...
-#include <linux/cwmp_kernel.h>
-#...
-
-int anykernelfunction ()
-{
-   .....
-   /* parameter change here  */
-   /* so we inform the cwmp: */
-   kernel_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
-   .....
-/*
-Description of lib_api_cwmp_value_change_call input parameters
- parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
- parameter 2 : is the parameter path
- parameter 3 : is the first correspondence related to the first indice
- parameter 4 : is the second correspondence related to the second indice
-   .
-   .
-   .
- parameter n : is the (n-2) correspondence related to the (n-2) indice
-*/
-
-}
-
-
-

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -0,0 +1,36 @@
+{
+	"json_plugin_version": 1,
+	"Device.CWMPManagementServer.": {
+		"type": "object",
+		"version": "2.15",
+		"protocols": [
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"dependency": "file:/etc/config/cwmp",
+		"EnableCWMP": {
+			"type": "boolean",
+			"version": "2.15",
+			"read": true,
+			"write": true,
+			"protocols": [
+				"usp"
+			],
+			"mapping": [
+				{
+					"type": "uci",
+					"uci": {
+						"file": "cwmp",
+						"section": {
+							"name": "cpe"
+						},
+						"option": {
+							"name": "enable"
+						}
+					}
+				}
+			]
+		}
+	}
+}

icwmp/files/etc/config/cwmp

@@ -0,0 +1,45 @@
+config acs 'acs'
+	option userid '' #$OUI-$SER
+	option passwd 'iopsys'
+	option periodic_inform_enable 'true'
+	option periodic_inform_interval '1800'
+	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option dhcp_discovery 'enable'
+	# compression possible configs: GZIP, Deflate, Disabled
+	option compression 'Disabled'
+	#­ possible configs interval :[1:65535]
+	option retry_min_wait_interval '5'
+	#­ possible configs interval :[1000:65535]
+	option retry_interval_multiplier '2000'
+	option ipv6_enable '0'
+	option ip_version '4'
+
+config cpe 'cpe'
+	option enable '1'
+	option default_wan_interface 'wan'
+	option default_lan_interface 'lan'
+	option log_to_console 'disable'
+	option log_to_file 'disable'
+	# log_severity: INFO (Default)	
+	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
+	option log_severity 'INFO'
+	option log_file_name '/var/log/icwmpd.log'
+	option log_max_size '102400'
+	option userid '' #$OUI-$SER
+	option passwd 'iopsys'
+	option port '7547'
+	option provisioning_code ''
+	option amd_version '5'
+	# compression possible configs: InstanceNumber, InstanceAlias
+	option instance_mode 'InstanceNumber'
+	option session_timeout '300'
+	option notification '1'
+	option exec_download '0'
+	option periodic_notify_enable '1'
+	option periodic_notify_interval '10'
+	option incoming_rule 'Port_Only'
+	
+config lwn 'lwn'
+	option enable '1'
+	option hostname ''
+	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -0,0 +1,80 @@
+#!/bin/sh
+
+#created by the icwmp package
+log() {
+	echo "${@}"|logger -t firewall.cwmp -p info
+}
+
+if [ ! -f "/var/state/cwmp" ]; then
+	exit 0;
+fi
+
+zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
+port=$(uci -q get cwmp.cpe.port)
+ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
+
+if [ -z "${zone_name}" ]; then
+	log "empty firewall zone name"
+	exit 0
+elif [ "$zone_name" = "icwmp" ]; then
+	iptables -nL zone_icwmp_input 2> /dev/null
+	if [ $? != 0 ]; then
+		iptables -w 1 -N zone_icwmp_input
+		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	else			
+		iptables -w 1 -F zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	fi			
+else
+	iptables -w 1 -F zone_icwmp_input 2> /dev/null
+	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -w 1 -X zone_icwmp_input 2> /dev/null
+fi
+
+cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
+cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
+
+# default incoming rule is Port only
+if [ -z "${incoming_rule}" ]; then
+	incoming_rule="port_only"
+fi
+
+if [ "${incoming_rule}" = "ip_only" ]; then
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+elif [ "${incoming_rule}" = "port_only" ]; then
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+else
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+fi
+
+echo ${cmd}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd}
+fi
+
+echo ${cmd6}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd6}
+fi
+
+uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit cwmp

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	local prevopt43url=""
-	local curopt43url=""
-	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
-	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -0,0 +1,32 @@
+#!/bin/sh
+. /lib/functions.sh
+
+log() {
+	echo "$@" |logger -t cwmp.update -p info
+}
+
+handle_icwmp_update() {
+	local cwmp_enable
+	config_load cwmp
+
+	config_get_bool cwmp_enable cpe enable 1
+	if [ "$cwmp_enable" = "0" ]; then
+		return 0
+	fi
+
+	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
+
+	if [ "$ret" == "true" ]; then
+		# read status from var/state/cwmp
+		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
+		if [ "$status" != "running" ]; then
+			log "Trigger out of bound inform, since last inform status was failure"
+			ubus -t 10 call tr069 inform >/dev/null 2>&1
+		fi
+	else
+		log "Restarting icwmp tr069 object"
+		/etc/init.d/icwmpd restart
+	fi
+}
+
+handle_icwmp_update $@

icwmp/files/etc/init.d/icwmpd

@@ -0,0 +1,520 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2015-2019 iopsys Software Solutions AB
+
+START=99
+STOP=00
+
+USE_PROCD=1
+PROG="/usr/sbin/icwmpd"
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+include /lib/network
+
+log() {
+	echo "${@}"|logger -t cwmp.init -p info
+}
+
+regenerate_ssl_link()
+{
+	local cert_dir all_file rehash
+
+	cert_dir="${1}"
+	[ ! -d "${cert_dir}" ] && return 0;
+
+	### Generate all ssl link for pem certicates ###
+	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
+	fi
+
+	### Generate all ssl link for crt certicates ###
+	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
+	fi
+}
+
+enable_dhcp_option43() {
+	local wan="${1}"
+
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local newreqopts=""
+	local option43_present=0
+
+	for ropt in $reqopts; do
+		case $ropt in
+			43) option43_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	if [ ${option43_present} -eq 1 ]; then
+		return;
+	fi
+
+	newreqopts="$reqopts 43"
+	if [ "${proto}" == "dhcp" ]; then
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+		ubus call network reload
+	fi
+}
+
+convert_to_hex() {
+	local val=""
+	local optval="${1}"
+	OPTIND=1
+	while getopts ":" opt "-$optval"
+	do
+		temp=$(printf "%02X" "'${OPTARG:-:}")
+		val="${val}:${temp}"
+	done
+
+	echo "${val}"
+}
+
+configure_send_op125() {
+	local sendopt="${1}"
+	local intf="${2}"
+	local uci="${3}"
+	local hex_oui=""
+	local hex_serial=""
+	local hex_class=""
+	local oui_len=0
+	local serial_len=0
+	local class_len=0
+
+	if [ "${uci}" = "network" ]; then
+		local opt125="125:00:00:0D:E9"
+	else
+		local opt125="125,00:00:0D:E9"
+	fi
+
+	config_get oui cpe manufacturer_oui ""
+	if [ -z "${oui}" ]; then
+		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
+	fi
+
+	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+	config_get serial cpe serial_number ""
+	if [ -z "${serial}" ]; then
+		serial=$(db -q get device.deviceinfo.SerialNumber)
+	fi
+
+	config_get class cpe product_class ""
+	if [ -z "${class}" ]; then
+		class=$(db -q get device.deviceinfo.ProductClass)
+	fi
+
+	oui_len=$(echo -n "${oui}" | wc -m)
+	serial_len=$(echo -n "${serial}" | wc -m)
+	class_len=$(echo -n "${class}" | wc -m)
+
+	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
+		return 0
+	fi
+
+	opt125_len=$((oui_len + serial_len + class_len))
+	if [ ${class_len} -gt 0 ]; then
+		opt125_len=$((opt125_len + 6))
+	else
+		opt125_len=$((opt125_len + 4))
+	fi
+
+	hex_opt125_len=$(printf "%02X" "${opt125_len}")
+	opt125="${opt125}:${hex_opt125_len}"
+	hex_oui=$(convert_to_hex "${oui}")
+	if [ -z "${hex_oui}" ]; then
+		return 0
+	fi
+
+	hex_oui_len=$(printf "%02X" "${oui_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
+	else
+		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
+	fi
+
+	hex_serial=$(convert_to_hex "${serial}")
+	if [ -z "${hex_serial}" ]; then
+		return 0
+	fi
+
+	hex_serial_len=$(printf "%02X" "${serial_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
+	else
+		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
+	fi
+
+	if [ ${class_len} -gt 0 ]; then
+		hex_class=$(convert_to_hex "${class}")
+		if [ -z "${hex_class}" ]; then
+			return 0
+		fi
+
+		hex_class_len=$(printf "%02X" "${class_len}")
+		if [ "${uci}" = "network" ]; then
+			opt125="${opt125}:03:${hex_class_len}${hex_class}"
+		else
+			opt125="${opt125}:06:${hex_class_len}${hex_class}"
+		fi
+	fi
+
+
+	if [ "${uci}" = "network" ]; then
+		new_send_opt="$sendopt $opt125"
+		uci -q set network.$intf.sendopts="$new_send_opt"
+	else
+		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
+	fi
+}
+
+enable_dnsmasq_option125() {
+	local lan="${1}"
+	local send125_present=0
+	local opt125="125,"
+
+	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
+	if [ "${proto}" = "server" ]; then
+		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
+
+		for sopt in $opt_list; do
+			if [[ "$sopt" == "$opt125"* ]]; then
+				send125_present=1
+				break
+			fi
+		done
+
+		if [ ${send125_present} -eq 0 ]; then
+			configure_send_op125 "" "${lan}" "dhcp"
+			ubus call uci commit '{"config":"dhcp"}'
+		fi
+	fi
+}
+
+enable_disable_dhcp_option125() {
+	local wan="${1}"
+	local action="${2}"
+
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local sendopts="$(uci -q get network.$wan.sendopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local newreqopts=""
+	local newsendopts=""
+	local req125_present=0
+	local send125_present=0
+	local network_uci_update=0
+	local opt125="125:"
+
+	for ropt in $reqopts; do
+		case $ropt in
+			125) req125_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	for sopt in $sendopts; do
+		if [[ "$sopt" == "$opt125"* ]]; then
+			send125_present=1
+			break
+		fi
+	done
+
+	if [ "${proto}" == "dhcp" ]; then
+		if [ "${action}" == "enable" ]; then
+			if [ ${req125_present} -eq 0 ]; then
+				newreqopts="$reqopts 125"
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+
+			if [ ${send125_present} -eq 0 ]; then
+				configure_send_op125 "${sendopts}" "${wan}" "network"
+				network_uci_update=1
+			fi
+		else
+			if [ ${req125_present} -eq 1 ]; then
+				newreqopts=$(echo ${reqopts/125/})
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+
+			if [ ${send125_present} -eq 1 ]; then
+				for sopt in $sendopts; do
+					if [[ "$sopt" == "$opt125"* ]]; then
+						newsendopts=$(echo ${sendopts/"${sopt}"/})
+						uci -q set network.$wan.sendopts="$newreqopts"
+						network_uci_update=1
+						break
+					fi
+				done
+			fi
+		fi
+	fi
+
+	if [ ${network_uci_update} -eq 1 ]; then
+		uci commit network
+		ubus call network reload
+	fi
+}
+
+wait_for_resolvfile() {
+	local time=$1
+	local tm=1
+
+	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
+	[ -n "$resolvfile" ] || return
+
+	while [ ! -f "$resolvfile" ]; do
+		sleep 1
+		[ "$tm" -ge "$time" ] && break
+		tm=$((tm+1))
+	done
+}
+
+copy_cwmp_etc_files_to_varstate() {
+	mkdir -p /var/run/icwmpd
+
+	if [ -f /etc/icwmpd/cwmp ]; then
+		uci -q -c /etc/icwmpd delete cwmp.acs
+		uci -q -c /etc/icwmpd commit cwmp
+		cp -f /etc/icwmpd/cwmp /var/state/cwmp
+	fi
+
+	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
+	fi
+
+	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
+	fi
+}
+
+copy_cwmp_varstate_files_to_etc() {
+	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
+	fi
+
+	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
+	fi
+
+	if [ -f /var/state/cwmp ]; then
+		uci -q -c /var/state delete cwmp.sess_status
+		uci -q -c /var/state commit cwmp
+		cp -f /var/state/cwmp /etc/icwmpd/
+	fi
+
+	# move the successful custom notify import marker to persistent storage
+	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
+		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
+	fi
+}
+
+validate_acs_section()
+{
+	uci_validate_section cwmp acs "acs" \
+		'passwd:string' \
+		'periodic_inform_enable:bool' \
+		'periodic_inform_interval:uinteger' \
+		'periodic_inform_time:string' \
+		'url:string' \
+		'dhcp_discovery:string' \
+		'dhcp_url:string' \
+		'compression:or("GZIP","Deflate","Disabled")' \
+		'retry_min_wait_interval:range(1, 65535)' \
+		'retry_interval_multiplier:range(1000, 65535)' \
+		'ipv6_enable:bool' \
+		'ssl_capath:string'
+
+}
+
+validate_cpe_section()
+{
+	uci_validate_section cwmp cpe "cpe" \
+		'interface:string' \
+		'default_wan_interface:string' \
+		'log_to_console:or("enable","disable")' \
+		'log_to_file:or("enable","disable")' \
+		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
+		'log_file_name:string' \
+		'log_max_size:uinteger' \
+		'userid:string' \
+		'passwd:string' \
+		'port:uinteger' \
+		'provisioning_code:string:""' \
+		'amd_version:range(1, 6)' \
+		'instance_mode:or("InstanceNumber","InstanceAlias")' \
+		'session_timeout:uinteger' \
+		'notification:bool' \
+		'exec_download:bool' \
+		'periodic_notify_enable:bool' \
+		'enable:bool' \
+		'periodic_notify_interval:uinteger'
+}
+
+validate_defaults() {
+	local ssl_capath
+	config_load cwmp
+
+	validate_acs_section || {
+		log "Validation of acs section failed"
+		return 1;
+	}
+
+	ssl_capath="${ssl_capath%/}"
+	# Put the cert pem file in keep list
+	if [ -d "${ssl_capath}" ]; then
+		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
+			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
+		fi
+	fi
+
+	validate_cpe_section || {
+		log "Validation of cpe section failed"
+		return 1;
+	}
+
+	return 0;
+}
+
+boot() {
+	local dhcp_discovery="0"
+
+	config_load cwmp
+	config_get dhcp_discovery acs dhcp_discovery "0"
+
+	config_get wan_interface cpe default_wan_interface "wan"
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		# Set dhcp option 43 if not already configured
+		enable_dhcp_option43 "${wan_interface}"
+	fi
+
+	config_get lan_interface cpe default_lan_interface ""
+	if [ -n "${lan_interface}" ]; then
+		# Set dhcp_option 125 if not already configured
+		enable_disable_dhcp_option125 "${wan_interface}" "enable"
+		enable_dnsmasq_option125 "${lan_interface}"
+	else
+		# Remove dhcp option 125 if exists
+		enable_disable_dhcp_option125 "${wan_interface}" "disable"
+	fi
+	
+	config_get ssl_capath acs ssl_capath
+
+	if [ -n "${ssl_capath}" ]; then
+		regenerate_ssl_link "${ssl_capath}"
+	fi
+
+	start
+}
+
+start_service() {
+	local enable_cwmp
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+
+	if [ "$enable_cwmp" = "0" ]; then
+		return 0
+	fi
+
+	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+
+	validate_defaults || {
+		log "Validation of defaults failed"
+		return 1;
+	}
+
+	# Copy backup data so that if it restart latter on it gets the info
+	copy_cwmp_etc_files_to_varstate
+
+	procd_open_instance icwmp
+	procd_set_param command "$PROG"
+	procd_append_param command -b
+	procd_set_param respawn \
+		"${respawn_threshold:-5}" \
+		"${respawn_timeout:-10}" "${respawn_retry:-3}"
+
+	procd_set_param watch network.interface
+	procd_close_instance
+}
+
+service_stopped()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
+stop_service()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
+reload_service() {
+	local ret
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+
+	ret="0"
+	if [ "$enable_cwmp" = "0" ]; then
+		stop
+		start
+		return 0
+	fi
+
+	tr069_status="$(ubus -t 1 call tr069 status)"
+	ret="$?"
+	if [ "$ret" = "7" ]; then
+		# ubus timed out may be due to uloop is busy in some task so returning
+		return 0
+	fi
+
+	status="$(echo $tr069_status | jsonfilter -qe '@.cwmp.status')"
+	ret="$?"
+	if [ "$status" = "up" ]; then
+		ubus -t 1 call tr069 command '{"command":"reload"}'
+		ret="$?"
+	fi
+
+	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
+		log "Restarting CWMP client"
+		stop
+		start
+	fi
+}
+
+service_triggers() {
+       procd_add_reload_trigger "cwmp"
+
+       procd_open_trigger
+               json_add_array
+                       json_add_string "" "interface.update"
+                       json_add_array
+                               json_add_array
+                                       json_add_string "" "run_script"
+                                       json_add_string "" "/etc/icwmpd/update.sh"
+                               json_close_array
+                       json_close_array
+                       json_add_int "" "2000"
+               json_close_array
+       procd_close_trigger
+}
+

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+. /lib/functions.sh
+# Copy defaults by the factory to the cwmp UCI user section.
+config_load cwmp
+
+# Get Manufacturer OUI.
+config_get oui cpe manufacturer_oui ""
+if [ -z "${oui}" ]; then
+	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
+fi
+
+oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+# Get system serial number.
+config_get serial cpe serial_number ""
+if [ -z "${serial}" ]; then
+	serial=$(db -q get device.deviceinfo.SerialNumber)
+fi
+
+# Get userid values
+config_get acs_userid acs userid ""
+config_get cpe_userid cpe userid ""
+
+# Only set if they are empty
+if [ -z "${acs_userid}" ]; then
+    uci -q set cwmp.acs.userid="${oui}-${serial}"
+fi
+
+if [ -z "${cpe_userid}" ]; then
+    uci -q set cwmp.cpe.userid="${oui}-${serial}"
+fi
+
+# Fix the cwmp.cpe.enable parameter
+# set default to 1 if not defined
+config_get enable_cwmp cpe enable ""
+if [ -z "${enable_cwmp}" ]; then
+    uci -q set cwmp.cpe.enable="1"
+fi
+
+# No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-cwmpfirewall

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+uci -q batch <<-EOT
+        delete firewall.cwmp
+        set firewall.cwmp=include
+        set firewall.cwmp.path=/etc/firewall.cwmp
+        set firewall.cwmp.reload=1
+        commit firewall
+EOT
+
+exit 0
+

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,54 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
-set_cwmp_reqopts
-regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -0,0 +1,2 @@
+/var/run/icwmpd/icwmpd_backup_session.xml
+/etc/icwmpd/cwmp

ieee1905/Config.in

@@ -0,0 +1,27 @@
+if (PACKAGE_ieee1905)
+
+menu "Configuration"
+
+config IEEE1905_EXTENSION_ALLOWED
+	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
+	default y
+
+config IEEE1905_PLATFORM_HAS_WIFI
+	bool "Platform has WiFi"
+	default y if PACKAGE_libwifi
+
+config IEEE1905_CMDU_SA_IS_ALMAC
+	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
+	default n
+
+config IEEE1905_WIFI_EASYMESH
+	bool "Include WiFi-Alliance's Easymesh updates"
+	default y
+
+config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
+	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
+	default y
+
+endmenu
+
+endif

ieee1905/Makefile

@@ -0,0 +1,140 @@
+#
+# Copyright (C) 2021 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ieee1905
+PKG_VERSION:=5.0.19
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=64f8ad63b07ad781fd819dad61739b93e6a47b41
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+
+define Package/ieee1905/Default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=IEEE-1905.1 stack
+endef
+
+define Package/ieee1905/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libieee1905
+  $(call Package/ieee1905/Default)
+  TITLE:=libieee1905.so (library for CMDU and TLV handling)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json
+endef
+
+define Package/ieee1905
+  $(call Package/ieee1905/Default)
+  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ubus +libpthread \
+	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
+endef
+
+include $(wildcard plugins/*.mk)
+
+define Package/ieee1905/description
+ This package provides IEEE Std 1905.1 stack.
+endef
+
+define Package/libieee1905/description
+ This package provides library functions for IEEE Std 1905.1 stack.
+endef
+
+plugins := \
+	$(if $(CONFIG_PACKAGE_map-plugin),map) \
+	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
+	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
+
+
+ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
+
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
+TARGET_CFLAGS += -DHAS_WIFI
+endif
+
+ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
+TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
+endif
+
+ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
+TARGET_CFLAGS += -DWIFI_EASYMESH
+endif
+
+ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
+TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
+endif
+
+MAKE_FLAGS += \
+	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
+
+MAKE_PATH:=src
+
+
+define Package/ieee1905/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
+endef
+
+define Package/libieee1905/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libieee1905
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libieee1905,$(1),$(2))
+	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+$(eval $(call BuildPackage,ieee1905))
+$(eval $(call BuildPackage,libieee1905))
+$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))

ieee1905/files/etc/config/ieee1905

@@ -0,0 +1,32 @@
+config ieee1905 'ieee1905'
+	option enabled '1'
+	option extension '1'
+	list extmodule 'map'
+	option registrar '2 5 6'
+#	option macaddress '0a:1b:2c:3d:4e:50'
+
+config al-iface
+	option enabled '1'
+	option ifname 'br-lan'
+	option type 'bridge'
+
+# ap sections are auto-generated/overwritten during onboarding
+#
+config ap
+	option band '2'
+	option ssid 'IOWRT-2.4GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+
+config ap
+	option band '5'
+	option ssid 'IOWRT-5GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+
+config ap
+	option band '6'
+	option ssid 'IOWRT-6GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+

ieee1905/files/etc/init.d/ieee1905

@@ -0,0 +1,100 @@
+#!/bin/sh /etc/rc.common
+
+START=96
+STOP=21
+
+USE_PROCD=1
+
+IS_CFG_VALID=1
+
+validate_ieee1905_section() {
+	uci_validate_section ieee1905 ieee1905 "ieee1905" \
+			'enabled:bool:true' \
+			'macaddress:or("auto",macaddr)' \
+			'registrar:string' \
+			'extension:bool:false' \
+			'extmodule:list(string)' \
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
+}
+
+validate_ali_section() {
+	local section="$1"
+
+	uci_validate_section ieee1905 $section "${1}" \
+			'ifname:string' \
+			'type:or("bridge",string)'
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
+}
+
+validate_ap_section() {
+	local section="$1"
+
+	uci_validate_section ieee1905 $section "${1}" \
+			'band:or("2", "5", "60", "6")' \
+			'ssid:string' \
+			'encryption:or("psk2", "sae-mixed", "sae", string)' \
+			'key:string' \
+			'uuid:string' \
+			'manufacturer:string' \
+			'model_name:string' \
+			'device_name:string' \
+			'model_number:string' \
+			'serial_number:string' \
+			'device_type:string' \
+			'os_version:uinteger'
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of ap section $section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
+}
+
+validate_ieee1905_config() {
+	IS_CFG_VALID=1
+
+	validate_ieee1905_section &&
+		config_foreach validate_ali_section "al-iface" &&
+		config_foreach validate_ap_section ap
+
+	[ "$IS_CFG_VALID" -ne 1 ] && {
+		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
+		return 1
+	}
+	return 0
+}
+
+start_service() {
+	config_load "ieee1905"
+	validate_ieee1905_config || return 1;
+
+	procd_open_instance
+        procd_set_param command "/usr/sbin/ieee1905d"
+	procd_set_param respawn
+#	procd_set_param stdout 1
+#	procd_set_param stderr 1
+	procd_close_instance
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "ieee1905"
+}
+
+reload_service() {
+	stop
+	start
+}

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+
+BMAC=$(db -q get hw.board.basemac)
+BMAC=${BMAC//:/}
+BMAC=${BMAC// /}
+BMAC=$(printf "%12.12X" $((0x$BMAC)))
+
+[ "$BMAC" == "" ] && exit 1
+
+LMAC=$((0x$BMAC & 0xfeffffffffff))
+LMAC=$(($LMAC | 0x020000000000))
+LMAC=$(printf "%12.12X" $LMAC)
+LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
+
+mac=$(uci -q get ieee1905.ieee1905.macaddress)
+
+[ "$mac" != "" ] && exit 0
+
+uci set ieee1905.ieee1905.macaddress="$LMAC"
+uci commit ieee1905
+

ieee1905/plugins/map.mk

@@ -0,0 +1,51 @@
+define Package/map-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/map-plugin/config
+	if (PACKAGE_map-plugin)
+
+		menu "Configuration"
+
+		config MULTIAP_EASYMESH_VERSION
+		int "Easymesh version"
+		default 2
+
+		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
+		bool "Sync configuration between dynamic controllers in the network"
+		default n
+
+		config MULTIAP_FUZZ_1905_CMDUS
+		bool "Include support to fuzz 1905 CMDUs for testing purpose"
+		default n
+
+		endmenu
+	endif
+endef
+
+TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
+
+ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
+TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
+endif
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef

ieee1905/plugins/snoop.mk

@@ -0,0 +1,12 @@
+define Package/snoop-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Show all received 1905 CMDUs over UBUS
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/snoop-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
+endef

ieee1905/plugins/topology.mk

@@ -0,0 +1,12 @@
+define Package/topology-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Build full network topology of the 1905 nodes only
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/topology-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
+endef

ifbt/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.2
-
-PKG_SOURCE_VERSION:=f6edff47b6c0a154ab892301acf767d19ac8ad73
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=README
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

imonitor/Makefile

@@ -5,15 +5,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
+PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1

inbd/Makefile

@@ -9,14 +9,14 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.2.3
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
+PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
-
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 

inotify-tools/Makefile

@@ -1,60 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inotify-tools
-PKG_VERSION:=3.14
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inotify-tools
-	CATEGORY:=Utilities
-	TITLE:=Tools to trace filesystem events.
-	URL:=
-endef
-
-define Package/inotify-tools/description
-	Tools to trace filesystem events.
-endef
-
-define Package/inotify-tools/install
-	$(INSTALL_DIR) $(1)/usr
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(CP) ./files/* $(1)/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,inotify-tools))

inotify-tools/files/usr/bin/iop_write_monitor

@@ -1,13 +0,0 @@
-#! /bin/sh
-
-# is the real root mounted ?
-if [ ! -f /tmp/inotify_real_root/etc/preinit ]
-then
-	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
-	mkdir /tmp/inotify_real_root
-	mount -t ubifs $ubivol /tmp/inotify_real_root
-fi
-
-inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
-
-

iop/Config.in

@@ -0,0 +1,7 @@
+config TARGET_VERSION
+	string
+	prompt "Software Version"
+
+config TARGET_CUSTOMER
+	string
+	prompt "Customer ID"

iop/Makefile

@@ -24,6 +24,10 @@ define Package/iop/description
 	This package contains iopsysWrt SDK utilities
 endef
 
+define Package/iop/config
+	source "$(SOURCE)/Config.in"
+endef
+
 define Build/Compile
 	true
 endef

iop/config

@@ -1,147 +1,220 @@
-CONFIG_BUILD_NLS=y
-CONFIG_BUSYBOX_CUSTOM=y
+############
+# Generic #
+##########
+
+# Build #
+CONFIG_BUILD_LOG=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+# CONFIG_SIGNED_PACKAGES is not set
+
+# Image #
+CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_ROOTFS_TARGZ=y
+
+# /etc/banner and /etc/device_info #
+CONFIG_IMAGEOPT=y
+CONFIG_VERSIONOPT=y
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
+CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
+
+# /lib/preinit #
+CONFIG_PREINITOPT=y
+# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
+CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
+CONFIG_TARGET_PREINIT_TIMEOUT=1
+# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
+# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
+CONFIG_TARGET_PREINIT_IFNAME=""
+CONFIG_TARGET_PREINIT_IP=""
+CONFIG_TARGET_PREINIT_NETMASK=""
+CONFIG_TARGET_PREINIT_BROADCAST=""
+
+# Mirror #
+CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
+
+
+##################
+# IOWRT Add-ons #
+################
+
+# EasySoC HAL #
+CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_wifimngr=y
+
+# Multi-AP #
+CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-agent=m
+CONFIG_PACKAGE_map-controller=m
+CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_wfadatad-collector=y
+
+# Network #
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_owsd=m
+CONFIG_PACKAGE_urlfilter=y
+
+# System #
+CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rulengd=y
+
+# TR-x69 #
+CONFIG_PACKAGE_uspd-mbedtls=y
+CONFIG_PACKAGE_icwmp-mbedtls=y
+CONFIG_PACKAGE_obuspa=y
+CONFIG_PACKAGE_bulkdata=y
+CONFIG_PACKAGE_periodicstats=y
+CONFIG_PACKAGE_stunc-mbedtls=m
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_twamp=m
+CONFIG_PACKAGE_udpecho-client=m
+CONFIG_PACKAGE_udpecho-server=m
+CONFIG_PACKAGE_xmppc=m
+
+# WebGUI #
+CONFIG_PACKAGE_sulu=y
+
+
+############
+# Network #
+##########
+
+# Protocols #
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_crashlog=y
-CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_easy-qos=y
-CONFIG_PACKAGE_gdb=m
-CONFIG_PACKAGE_getopt=y
-CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_ifbt=y
-CONFIG_PACKAGE_imonitor=y
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_iopupgrade=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
-CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
-CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-config-backup=y
-CONFIG_PACKAGE_juci-ddns=y
-CONFIG_PACKAGE_juci-diagnostics=y
-CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
-CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-easyqos=y
-CONFIG_PACKAGE_juci-event=y
-CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-icwmp=y
-CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-minidlna=y
-CONFIG_PACKAGE_juci-mod-status=y
-CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-netmode=y
-CONFIG_PACKAGE_juci-network-device=y
-CONFIG_PACKAGE_juci-network-dsl=y
-CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-network-port=y
-CONFIG_PACKAGE_juci-openvpn=y
-CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
-CONFIG_PACKAGE_juci-samba=y
-CONFIG_PACKAGE_juci-snmpd=y
-CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-upnp=y
-CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
-CONFIG_PACKAGE_kmod-siit=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
-# CONFIG_PACKAGE_libcgroup-utils is not set
-CONFIG_PACKAGE_libdaemon=y
-CONFIG_PACKAGE_libffmpeg-mini=y
-CONFIG_PACKAGE_libgmp=y
-CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
-CONFIG_PACKAGE_minidlna=y
-CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_gre=y
+CONFIG_PACKAGE_map=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
-CONFIG_PACKAGE_power-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
 CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_samba3=y
-CONFIG_PACKAGE_samba3-nmbd=y
-CONFIG_PACKAGE_snmpd=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_tc=y
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_tptest=y
-CONFIG_PACKAGE_traceroute6=y
 CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_wifilife=y
-CONFIG_PACKAGE_wifimngr=y
-CONFIG_PACKAGE_libwifix=y
-CONFIG_PACKAGE_wifixd=y
 CONFIG_PACKAGE_xl2tpd=y
+
+# Services #
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
+CONFIG_PACKAGE_ddns-scripts=y
+CONFIG_PACKAGE_dnsmasq=y
+CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_mosquitto-client-ssl=y
+CONFIG_PACKAGE_mosquitto-ssl=y
+CONFIG_PACKAGE_nginx=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_vsftpd-tls=m
+
+# Tools and Utilities #
+CONFIG_PACKAGE_curl=y
+CONFIG_PACKAGE_libcurl=y
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+# CONFIG_LIBCURL_MBEDTLS is not set
+CONFIG_LIBCURL_OPENSSL=y
+CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_ip-bridge=y
+CONFIG_PACKAGE_ip-full=y
+CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_ipset=y
+CONFIG_PACKAGE_iptables-zz-legacy=y
+CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
+CONFIG_PACKAGE_iptables-mod-filter=y
+CONFIG_PACKAGE_iptables-mod-ipopt=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_traceroute6=y
+
+
+############
+# System  #
+##########
+
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_getopt=y
+# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_jq=y
+CONFIG_PACKAGE_libustream-openssl=y
+# CONFIG_PACKAGE_libustream-wolfssl is not set
+CONFIG_PACKAGE_lscpu=y
+CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_OPENSSL_WITH_COMPRESSION=y
+CONFIG_PACKAGE_procd-ujail=m
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-rpcsys=y
+CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_uledd=y
+# The urandom-seed package is very strange. It seeds urandom with urandom...
+# Disable it. Most SoCs nowadays has HW random generators anyway.
+# CONFIG_PACKAGE_urandom-seed is not set
+# CONFIG_PACKAGE_urngd is not set
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_uuidgen=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
-CONFIG_TARGET_ROOTFS_TARGZ=y
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-CONFIG_BUILD_LOG=y
+
+
+################
+# LuCI WebGUI #
+##############
+
+# BEGIN: luci-nginx metapackage with some changes
+# We do not want libiwinfo-lua on non-WiFi targets, but it is already
+# depended on by other luci-packages, so no need to take it in explicitly
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-opkg=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+# CONFIG_LUCI_JSMIN is not set
+# CONFIG_LUCI_CSSTIDY is not set
+CONFIG_PACKAGE_luci-mod-dashboard=y
+CONFIG_PACKAGE_luci-theme-openwrt-2020=y
+CONFIG_PACKAGE_nginx-mod-luci=y
+
+
+############
+# BusyBox #
+##########
+
+CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
+CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
 CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
 # CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
-CONFIG_BUSYBOX_CONFIG_HTTPD=y
+# CONFIG_BUSYBOX_CONFIG_HTTPD is not set
 # CONFIG_BUSYBOX_CONFIG_INSMOD is not set
 # CONFIG_BUSYBOX_CONFIG_MODINFO is not set
 # CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
@@ -151,6 +224,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_BUSYBOX_CONFIG_IP is not set
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
@@ -185,14 +259,39 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
-# CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
+CONFIG_BUSYBOX_CONFIG_MOUNTPOINT=y
+CONFIG_BUSYBOX_CONFIG_RUN_PARTS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_GZIP_LEVELS=y
+CONFIG_BUSYBOX_CONFIG_GZIP_FAST=2
+CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_SLEEP=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_FLOAT_SLEEP=y
+CONFIG_BUSYBOX_CONFIG_FLOAT_DURATION=y
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+CONFIG_BUSYBOX_CONFIG_REALPATH=y
+CONFIG_BUSYBOX_CONFIG_TTY=y
+CONFIG_BUSYBOX_CONFIG_BLOCKDEV=y
+CONFIG_BUSYBOX_CONFIG_PARTPROBE=y
+CONFIG_BUSYBOX_CONFIG_LFS=y
+CONFIG_BUSYBOX_CONFIG_FDISK=y
+CONFIG_BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_GPT_LABEL=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED=y
+CONFIG_BUSYBOX_CONFIG_IONICE=y
+CONFIG_BUSYBOX_CONFIG_RENICE=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_BTRFS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_F2FS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
+CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
+CONFIG_BUSYBOX_CONFIG_NOHUP=y
 
+# Use fw3 iptables-based instead of newer nftables-based fw4
+# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
+# Enabling luci-app-firewall enables fw4
+# CONFIG_PACKAGE_luci-app-firewall is not set
+CONFIG_PACKAGE_firewall=y
+# CONFIG_PACKAGE_firewall4 is not set

iop/iop.completion

@@ -35,7 +35,7 @@ _iop()
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
              scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
+             update_package update_feed_branches ssh_upgrade smoketest"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 

iop/scripts/extract_core.sh

@@ -6,13 +6,9 @@ function extract_core {
 	topdir=$(pwd)
 
 	# Paths to packages that should be exported.
-	paths+='package/network/services/dnsmasq '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
 	paths+='package/utils/busybox '
-	paths+='package/base-files '
-	paths+='package/system/procd '
 	paths+='package/system/rpcd '
 	paths+='package/network/services/openvpn '
 
@@ -24,7 +20,13 @@ function extract_core {
 		echo ""
 		echo "Example: $0 extract_core"
 		echo "  -p package/utils/busybox"
-		echo "  -r feeds/lede_core"
+		echo "  -r feeds/openwrt_core"
+		echo "  -b devel"
+		echo ""
+		echo "Extract all default packages:"
+		echo "$0 extract_core"
+		echo "  -p default"
+		echo "  -r feeds/openwrt_core"
 		echo "  -b devel"
 	}
 

iop/scripts/feeds_update.sh

@@ -2,61 +2,65 @@
 
 function feeds_update {
 
-    developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
+	developer=0
+	override=1
+	start=$(date -u +'%s')
+	while getopts "n" opt; do
+		case $opt in
+		n)
+			override=0
+			;;
+		esac
+	done
 
+	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-    git remote -v | grep -q http || developer=1
+	cp .config .genconfig_config_bak
 
-    cp .config .genconfig_config_bak
-
-    #if -d argument is passed, clone feeds with ssh instead of http
-    if [ $developer == 1 ]; then
-	./scripts/feeds update -g
-    else
-	./scripts/feeds update
-    fi
+	#if -d argument is passed, clone feeds with ssh instead of http
+	if [ $developer == 1 ]; then
+		./scripts/feeds update -g
+	else
+		./scripts/feeds update
+	fi
 	./scripts/feeds update -ai
 
-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-		./scripts/feeds install -f -p lede_core -a
-    fi
+	# replace core packages with iopsys versions
+	if [ $override == 1 ]; then
+		./scripts/feeds install -f -p openwrt_core -a
+	fi
 
-    # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+	# targets need to be installed explicitly
+	for target in $(ls ./feeds/targets); do
+		rm -f target/linux/$target
+		./scripts/feeds install -p targets $target
+	done
 
-    # install all packages
-    ./scripts/feeds install -a
+	# Workaround for bug in 22.03.0-rc4 where installed target path has been
+	# moved to target/linux/feeds but Config.in and Makefile from installed
+	# targets are not properly included from the new location.
+	# This hack is to be removed once the issues are fixed.
+	# Note that the above block of code might no longer necessary because
+	# targets no longer need to be installed explicitly.
+	echo "Working around installed-target-bug"
+	for f in target/linux/feeds/*; do
+		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
+	done
 
-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
+	# install all packages
+	./scripts/feeds install -a
 
-    cp .genconfig_config_bak .config
-    make defconfig
+	# remove broken symlinks ( for packages that are no longer in the feed )
+	find -L package/feeds -maxdepth 2 -type l -delete
 
-    # record when we last run this script
-    touch tmp/.iop_bootstrap
+	cp .genconfig_config_bak .config
+	make defconfig
 
-    # always return true
-    exit 0
+	# record when we last run this script
+	touch tmp/.iop_bootstrap
+
+	# always return true
+	exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
-
-
-
-

iop/scripts/genconfig.sh

@@ -5,7 +5,6 @@ function genconfig {
 	export IMPORT=1
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
-	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
 	export CONFIGPATH="package/feeds/iopsys/iop"
 	CUSTPATH="customerconfigs"
@@ -13,11 +12,14 @@ function genconfig {
 	export VERBOSE=0
 	export DEVELOPER=0
 	target="bogus"
-	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
+	target_config_path=""
+	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
+	ramips="target/linux/feeds/iopsys-ramips"
+	econet="target/linux/feeds/iopsys-econet"
+	x86="target/linux/feeds/iopsys-x86"
+	armvirt="target/linux/feeds/iopsys-armvirt"
+	mediatek="target/linux/feeds/iopsys-mediatek"
+	qualcomm_ipq95xx="target/linux/feeds/ipq95xx"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -79,20 +81,51 @@ function genconfig {
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
-	    local profile=$1
+		local profile=$1
 
+		[ -n "$profile" ] || return
+
+		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
+			local targetpath="./target/linux/feeds/$TARGET"
+			local profiles=
+			local pfound=0
+
+			if [ -e "$targetpath/genconfig" ]; then
+				profiles=$(cd $targetpath; ./genconfig)
+
+				for p in $profiles; do
+					if [ $p == $profile ]; then
+						pfound=1
+						break
+					fi
+				done
+			fi
+
+			if [ $pfound -eq 1 ]; then
+				target="$(echo $TARGET | tr '-' '_')"
+				target_config_path="$targetpath/config"
+			fi
+
+			return
+		fi
 
-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
 		[ -e $brcm63xx_arm/genconfig ] &&
 			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
 		[ -e $ramips/genconfig ] &&
 			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
+		[ -e $mediatek/genconfig ] &&
+			iopsys_mediatek=$(cd $mediatek; ./genconfig)
+		[ -e $qualcomm_ipq95xx/genconfig ] &&
+			ipq95xx=$(cd $qualcomm_ipq95xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -101,18 +134,10 @@ function genconfig {
 			return
 	    fi
 
-	    for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
-		    return
-		fi
-	    done
-
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -120,35 +145,54 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="$ramips/config"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_intel_mips; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="intel_mips"
-			config_path="$intel_mips/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
 
+	    for p in $iopsys_x86; do
+		if [ $p == $profile ]; then
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_armvirt; do
+		if [ $p == $profile ]; then
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_mediatek; do
+		if [ $p == $profile ]; then
+		    target="iopsys_mediatek"
+			target_config_path="$mediatek/config"
+		    return
+		fi
+	    done
+
+	    for p in $ipq95xx; do
+		if [ $p == $profile ]; then
+		    target="ipq95xx"
+			target_config_path="$qualcomm_ipq95xx/config"
+		    return
+		fi
+	    done
 	}
 
-	git remote -v | grep -q http || {
+	git remote -v | grep -qE '(git@|ssh://)' && {
 		DEVELOPER=1
-
-		bcmAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-		mediatekAllowed=0
-		wifilifeAllowed=0
-
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
-		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
 	}
 
 	v() {
@@ -162,6 +206,7 @@ function genconfig {
 		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
 		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
+		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
 		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
 		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
 		echo -e "  -h|--help\t\tShow this message"
@@ -169,7 +214,7 @@ function genconfig {
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
 		echo
-		echo "Example ./iop genconfig dg200 TELIA"
+		echo "Example ./iop genconfig eg400 OPERATORX"
 		echo "(if no customerconfig is chosen, iopsys config will be used)"
 		echo
 		exit 0
@@ -180,7 +225,7 @@ function genconfig {
 		local ALL="$1"
 		local CUSTOMER="$2"
 		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
 			if [ "$boards" ]; then
 				echo "$CUSTOMER has following boards:"
 				for board in $boards; do
@@ -197,7 +242,7 @@ function genconfig {
 			if [ "$customers" -a "$ALL" == 1 ]; then
 				for customer in $customers; do
 					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
 					if [ "$boards" ]; then
 						for board in $boards; do
 							echo -e "\t$board"
@@ -220,28 +265,30 @@ function genconfig {
 
 	generate_config()
 	{
-	DIFFFILE="$1"
-	MASTERFILE="$2"
-	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
-	done < $DIFFFILE
+		DIFFFILE="$1"
+		MASTERFILE="$2"
+		while read p; do
+			v "$p"
+			sed -r -i "$p" $MASTERFILE
+		done < $DIFFFILE
 	}
 
 	setup_dirs()
 	{
-		if git ls-remote $CUSTREPO -q 2>/dev/null; then
-			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
+		git remote -v | grep -q http || {
+			if git ls-remote $CUSTREPO -q 2>/dev/null; then
+				if [ ! -d "$CUSTPATH" ]; then
+					git clone "$CUSTREPO" "$CUSTPATH"
+				elif [ $IMPORT -eq 1 ]; then
+					cd $CUSTPATH
+					v "git pull"
+					git pull
+					cd - >/dev/null #go back
+				fi
+			else
+				echo "You do not have access to $CUSTREPO"
 			fi
-		else
-			echo "You do not have access to $CUSTREPO"
-		fi
+		}
 
 		if [ ! -d "$FILEDIR" ]; then
 			mkdir -p $FILEDIR
@@ -249,13 +296,6 @@ function genconfig {
 			v "rm -rf $FILEDIR*"
 			rm -rf $FILEDIR*
 		fi
-
-		if [ ! -d "$THEMEDIR" ]; then
-			mkdir -p $THEMEDIR
-		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $THEMEDIR/*"
-			rm -rf $THEMEDIR/*
-		fi
 	}
 
 	create_and_copy_files()
@@ -291,26 +331,35 @@ function genconfig {
 		v "cp $CONFIGPATH/config .config"
 		cp $CONFIGPATH/config .config
 
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
+		if [ -f $target_config_path/config ]; then
+		    cat $target_config_path/config >> .config
+		    echo "" >> .config
 		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
+		if [ -f $target_config_path/$BOARDTYPE/config ]; then
+		    cat $target_config_path/$BOARDTYPE/config >> .config
+		    echo "" >> .config
 		fi
 
-		#special handling for intel_mips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
+		# Special handling for targets which use TARGET_DEVICES 
+		case "$target" in
+		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
+			# This assumes the device name to be unique within one target,
+			# which is a fair assumption to make.
+			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
+			if [ -z "$mk_file" ]; then
+				echo "Error determining subtarget for $target / ${BOARDTYPE}"
+				return 1
+			fi
+			local subtarget="$(basename "${mk_file%.mk}")"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		else
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+			;;
+		*)
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-		fi
+			;;
+		esac
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -325,27 +374,29 @@ function genconfig {
 					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
 					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
 				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
 				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
 					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+					echo "" >> .config
 				fi
 				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
 					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
 					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+					echo "" >> .config
 				fi
 			done
 		fi
 
 		# Set target version
 		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
-		# Enable Pckage source tree override if selected
+		# Enable Package source tree override if selected
 		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
 
 		# developer mode selected ?
@@ -353,18 +404,8 @@ function genconfig {
 		if [ $DEVELOPER -eq 1 ]; then
 			# rewrite url to clone with ssh instead of http
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
 			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
 		if [ -n "$BRCM_MAX_JOBS" ]
@@ -372,15 +413,12 @@ function genconfig {
 		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
 		fi
 
-		# Force regeneration of themes
-		touch package/feeds/juci/juci/Makefile
-
 		# Force regeneration of kernel Makefile
 		# Needed to disable kmods for iopsys-brcm targets
 		touch package/kernel/linux/Makefile
 
 		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
+		# currently boardparms.c and boardparms_voice.c is the only place that is depending on boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
 
@@ -417,6 +455,7 @@ function genconfig {
 			-c|--clean) export CLEAN=1;;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
+			-t|--target) export TARGET="$2"; shift;;
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;

iop/scripts/genconfig_min.sh

@@ -0,0 +1,469 @@
+#!/bin/bash
+
+function genconfig_min {
+	export CLEAN=0
+	export SRCTREEOVERR=0
+	export FILEDIR="files/"
+	CURRENT_CONFIG_FILE=".current_config_file"
+	export CONFIGPATH="package/feeds/iopsys/iop"
+	CUSTPATH="customerconfigs"
+	export CUSTCONF="customerconfigs/customers"
+	export VERBOSE=0
+	export DEVELOPER=0
+	target="bogus"
+	target_config_path=""
+	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
+	ramips="target/linux/feeds/iopsys-ramips"
+	econet="target/linux/feeds/iopsys-econet"
+	x86="target/linux/feeds/iopsys-x86"
+	armvirt="target/linux/feeds/iopsys-armvirt"
+	mediatek="target/linux/feeds/iopsys-mediatek"
+	qualcomm_ipq95xx="target/linux/feeds/ipq95xx"
+
+	Red='\033[0;31m'          # Red
+	Color_Off='\033[0m'       # Text Reset
+	Yellow='\033[0;33m'       # Yellow
+
+	function find_last {
+	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
+	}
+
+	function is_new {
+	    for opt in $conf_warned
+	    do
+		if [ "$opt" == "$1" ]
+		then
+		    return 1
+		fi
+	    done
+	    # option not found return true
+	    return 0
+	}
+
+	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
+	    local conf_opt
+	    local conf_org
+	    local conf_new
+
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
+	    do
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		if [ -n "${conf_opt}" ]
+		then
+		    conf_org=$(find_last ${conf_opt} .genconfig.config)
+		    conf_new=$(find_last ${conf_opt} .config)
+		    if [ "$conf_org" != "$conf_new" ]
+		    then
+			if is_new $conf_opt
+			then
+			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
+			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
+			    echo "This is a real problem somebody needs to investigate"
+			    echo ""
+			    conf_warned="$conf_warned $conf_opt"
+			fi
+		    else
+			true
+			# for debug to see all options
+			#echo -e "wanted [$conf_org] got [$conf_new]"
+		    fi
+		fi
+		num=$((num+1))
+	    done
+	}
+
+	# Takes a board name and returns the target name in global var $target
+	set_target() {
+		local profile=$1
+
+		[ -n "$profile" ] || return
+
+		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
+			local targetpath="./target/linux/feeds/$TARGET"
+			local profiles=
+			local pfound=0
+
+			if [ -e "$targetpath/genconfig" ]; then
+				profiles=$(cd $targetpath; ./genconfig)
+
+				for p in $profiles; do
+					if [ $p == $profile ]; then
+						pfound=1
+						break
+					fi
+				done
+			fi
+
+			if [ $pfound -eq 1 ]; then
+				target="$(echo $TARGET | tr '-' '_')"
+				target_config_path="$targetpath/config"
+			fi
+
+			return
+		fi
+
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
+		[ -e $mediatek/genconfig ] &&
+			iopsys_mediatek=$(cd $mediatek; ./genconfig)
+		[ -e $qualcomm_ipq95xx/genconfig ] &&
+			ipq95xx=$(cd $qualcomm_ipq95xx; ./genconfig)
+
+	    if [ "$profile" == "LIST" ]; then
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+				echo "$list based boards:"
+				for b in ${!list}; do
+					echo -e "\t$b"
+				done
+			done
+			return
+	    fi
+
+	    for p in $iopsys_brcm63xx_arm; do
+		if [ $p == $profile ]; then
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_ramips; do
+		if [ $p == $profile ]; then
+		    target="iopsys_ramips"
+			target_config_path="$ramips/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_econet; do
+		if [ $p == $profile ]; then
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_x86; do
+		if [ $p == $profile ]; then
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_armvirt; do
+		if [ $p == $profile ]; then
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_mediatek; do
+		if [ $p == $profile ]; then
+		    target="iopsys_mediatek"
+			target_config_path="$mediatek/config"
+		    return
+		fi
+	    done
+
+	    for p in $ipq95xx; do
+		if [ $p == $profile ]; then
+		    target="ipq95xx"
+			target_config_path="$qualcomm_ipq95xx/config"
+		    return
+		fi
+	    done
+	}
+
+	git remote -v | grep -qE '(git@|ssh://)' && {
+		DEVELOPER=1
+
+		bcmAllowed=0
+		endptAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
+	}
+
+	v() {
+		[ "$VERBOSE" -ge 1 ] && echo "$@"
+	}
+
+	usage() {
+		echo
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo
+		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\t\tVerbose"
+		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
+		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
+		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
+		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
+		echo -e "  -h|--help\t\tShow this message"
+		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
+		echo -e "  -a|--list-all\t\tList all Customers and their board types"
+		echo -e "  -b|--boards\t\tList all board types"
+		echo
+		echo "Example ./iop genconfig eg400 OPERATORX"
+		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo
+		exit 0
+	}
+
+	list_customers()
+	{
+		local ALL="$1"
+		local CUSTOMER="$2"
+		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common )"
+			if [ "$boards" ]; then
+				echo "$CUSTOMER has following boards:"
+				for board in $boards; do
+					echo -e "\t$board"
+				done
+			else
+				echo "No boards found for $CUSTOMER"
+			fi
+		elif [ "$CUSTOMER" ]; then
+			echo "No customer called $CUSTOMER"
+			exit 1
+		elif [ -d $CUSTCONF ]; then
+			local customers="$(ls -1 $CUSTCONF)"
+			if [ "$customers" -a "$ALL" == 1 ]; then
+				for customer in $customers; do
+					echo $customer
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common )"
+					if [ "$boards" ]; then
+						for board in $boards; do
+							echo -e "\t$board"
+						done
+					else
+						echo "has no boards"
+					fi
+				done
+			elif [ "$customers" ]; then
+				echo -e "$customers"
+			else
+				echo "no customers found"
+			fi
+		else
+			echo "No $CUSTCONF folder found"
+		fi
+		exit 0
+	}
+
+
+	generate_config()
+	{
+		DIFFFILE="$1"
+		MASTERFILE="$2"
+		while read p; do
+			v "$p"
+			sed -r -i "$p" $MASTERFILE
+		done < $DIFFFILE
+	}
+
+	setup_dirs()
+	{
+
+		if [ ! -d "$FILEDIR" ]; then
+			mkdir -p $FILEDIR
+		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+			v "rm -rf $FILEDIR*"
+			rm -rf $FILEDIR*
+		fi
+	}
+
+	create_and_copy_files()
+	{
+		local BOARDTYPE=$1
+		shift
+		local CUSTOMERS=$@
+
+		# Validate seleced board and customers
+		set_target $BOARDTYPE
+		if [ $target == "bogus" ]; then
+			echo "Hardware profile does not exist"
+			exit 1
+		elif [ -n "$CUSTOMERS" ]; then
+			for CUSTOMER in $CUSTOMERS; do
+				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+					echo "Customer profile for '$CUSTOMER' does not exist"
+					exit 1
+				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+						echo "Common profile configuration will be used"
+					else
+						exit 1
+					fi
+				fi
+			done
+		fi
+
+		# Generate base config
+		rm -f .config
+		v "Config $BOARDTYPE selected"
+		v "cp $CONFIGPATH/config .config"
+		cp $CONFIGPATH/config .config
+
+		if [ -f $target_config_path/config ]; then
+		    cat $target_config_path/config >> .config
+		    echo "" >> .config
+		fi
+		if [ -f $target_config_path/$BOARDTYPE/config ]; then
+		    cat $target_config_path/$BOARDTYPE/config >> .config
+		    echo "" >> .config
+		fi
+
+		# Special handling for targets which use TARGET_DEVICES
+		case "$target" in
+		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
+			# This assumes the device name to be unique within one target,
+			# which is a fair assumption to make.
+			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
+			if [ -z "$mk_file" ]; then
+				echo "Error determining subtarget for $target / ${BOARDTYPE}"
+				return 1
+			fi
+			local subtarget="$(basename "${mk_file%.mk}")"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+			;;
+		*)
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+			;;
+		esac
+
+		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+
+		# Add customerconfig diff if a customer is selected
+		if [ -n "$CUSTOMERS" ]; then
+			for CUSTOMER in $CUSTOMERS; do
+				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
+					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+				fi
+				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+				fi
+				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+					echo "" >> .config
+				fi
+				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+					echo "" >> .config
+				fi
+			done
+		fi
+
+		# Set target version
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
+
+		# Enable Package source tree override if selected
+		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+		# developer mode selected ?
+		echo "CONFIG_DEVEL=y" >>.config
+
+		if [ -n "$BRCM_MAX_JOBS" ]
+		then
+		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
+		fi
+
+		# Force regeneration of kernel Makefile
+		# Needed to disable kmods for iopsys-brcm targets
+		touch package/kernel/linux/Makefile
+
+		# we need to signal to bradcom SDK that we have changed the board id
+		# currently boardparms.c and boardparms_voice.c is the only place that is depending on boardid name
+		# so just touch that file.
+		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
+
+		# Store generated config
+		cp .config .genconfig.config
+
+		# Set default values based on selected parameters
+		v "$(make defconfig 2>&1)"
+
+		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+
+		# Clean base-file package to force rebuild when changing profile
+		v "$(make package/base-files/clean 2>&1)"
+
+		verify_config
+	}
+
+	####### main #####
+	if [ ! -e tmp/.iop_bootstrap ]; then
+		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+		echo "Run: iop feeds_update"
+		exit 0
+	fi
+
+	if [ $# -eq 0 ]; then
+		echo Current profile:
+		cat $CURRENT_CONFIG_FILE
+		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
+		exit 0
+	else
+		while [ -n "$1" ]; do
+			case "$1" in
+
+			-c|--clean) export CLEAN=1;;
+			-n|--no-update) export IMPORT=0;;
+			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
+			-t|--target) export TARGET="$2"; shift;;
+			-p|--profile) export PROFILE="$2"; shift;;
+			-r|--repo) export CUSTREPO="$2"; shift;;
+			-s|--override) export SRCTREEOVERR=1;;
+			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
+			-h|--help) usage;;
+			-l|--list) list_customers 0 $2;;
+			-a|--list-all)list_customers 1;;
+			-b|--boards)set_target LIST;exit 0;;
+			-*)
+				echo "Invalid option: $1 "
+				echo "Try -h or --help for more information."
+				exit 1
+				;;
+			*) break;;
+			esac
+			shift;
+		done
+
+		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+
+		setup_dirs
+		create_and_copy_files "$@"
+	fi
+}
+
+register_command "genconfig_min" "Generate configuration for customer with manual board configuration"