dectproxy has been enabled in Dectmngr2 for

third party applications.

4g-support/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	interface=$(cat $usb_dir/interface)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+#devno=$(basename $DEVPATH)
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,771 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod +libsqlite3
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,57 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+
+init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

ated/Makefile

@@ -1,77 +0,0 @@
-/* 
- * Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -1,65 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))

bbf/Config_bbfdm.in

@@ -1,27 +0,0 @@
-if PACKAGE_libbbfdm
-
-config LIBBBFDM_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Compile with tr181 device features"
-	default y
-
-config BBF_TR104
-	bool "Compile with tr104 voice features"
-	default y
-
-config BBF_TR143
-	bool "Compile with tr143 diagnostics features"
-	default y
-
-config BBF_TR157
-	bool "Compile with tr157 bulkdata collector features"
-	default y
-	
-config BBF_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

bbf/Makefile

@@ -1,87 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=1.0-2019-10-01
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b3bae9df19df35075ac52f53758288d8e0573790
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm/description
- Test description will update later.
-endef
-
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_BBF_TR157),y)
-CONFIGURE_ARGS += \
-	--enable-tr157
-endif
-
-ifeq ($(CONFIG_BBF_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-tr064
-endif
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libbbfdm))

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -10,16 +10,12 @@ USE_PROCD=1
 
 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0
 
-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"
 
 }

crashlog/Makefile

@@ -1,18 +1,9 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

dectmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.23
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -1,20 +1,19 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_VERSION:=1.1.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_SOURCE_VERSION:=ee63f0c087840adba9d944ae31d71a3ef9d64043
 PKG_NAME:=dectmngr2
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
 export BUILD_DIR
@@ -22,7 +21,6 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -30,7 +28,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
 endef
 
 define Package/dectmngr2/description
@@ -43,7 +41,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -51,7 +48,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

dslmngr/Makefile

@@ -1,81 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -1,51 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,165 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string:none' \
-		'macaddr:string:none' \
-		'proto:string:none' \
-		'port:list(uinteger):none' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-	if [ "${ports}" != "none" ]; then
-		IFS=","
-		for port in ${ports};
-		do
-			cmd="--dport ${port}:${port} ${cmd}";
-		done
-		IFS=' '
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_log classcfg ${cmd} 
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A OUTPUT ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,10 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
-        commit firewall
-EOT

easy-soc-libs.deprecated/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_libwifix)
-menu "configurations"
-
-config LIBWIFIX_DEBUG
-	depends on PACKAGE_libwifix
-	bool "Enable wifi debugging"
-	default n
-
-endmenu
-endif

easy-soc-libs.deprecated/Makefile

@@ -1,108 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs.deprecated
-PKG_VERSION:=1.0.1
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b88afddd2f4cb216bfcd190f9096c138299c28e2
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs.deprecated
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries (deprecated)
-  SUBMENU:=IOPSYS easy SoC libraries (deprecated)
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifix/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifix
-  $(call Package/easy-soc-libs.deprecated)
-  TITLE:= WiFi library for wifix (deprecated)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-ifdef CONFIG_LIBWIFIX_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifix),libwifix)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-define Build/InstallDev/libwifix
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifix/wifi.h $(1)/usr/include/wifix.h
-	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default)
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifix/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifix/libwifi*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libwifix))

easy-soc-libs/Config.in

@@ -1,23 +0,0 @@
-if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
-menu "configurations"
-
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debugging support"
-	default n
-
-config LIBWIFI_DEBUG
-	depends on PACKAGE_libwifi
-	bool "Enable wifi debugging"
-	default n
-
-config LIBDSL_DEBUG
-	depends on PACKAGE_libdsl
-	bool "Enable xdsl debugging"
-	default n
-
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
-endmenu
-endif

easy-soc-libs/Makefile

@@ -1,164 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.4.0
-PKG_RELEASE:=1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=30f5527ae724d54537c803127e11992d1a5ae154
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries
-  SUBMENU:=IOPSYS easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
-endef
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))

endptcfg/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

endptmngr/Makefile

@@ -1,69 +0,0 @@
-#
-# Copyright (C) 2018 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=631e61b7ab5d86f2f4c86756a117badff9fb0f2c
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_NAME:=endptmngr
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-endif
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
-endef
-
-endif
-
-
-define Package/endptmngr/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))

fatrace/Makefile

@@ -1,61 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v3.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=fatrace
-PKG_VERSION:=0.12
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fatrace
-	CATEGORY:=Utilities
-	TITLE:=Report system wide file access events
-	URL:=
-	DEPENDS	:= +@KERNEL_FANOTIFY
-endef
-
-define Package/fatrace/description
-	Report system wide file access events.
-endef
-
-MAKE_INSTALL_FLAGS += PREFIX="/" 
-
-define Package/fatrace/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
-#	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,fatrace))
-
-

fatrace/patches/001-fix-O_LARGEFILE.patch

@@ -1,14 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index 1c0899a..b7d1560 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -44,7 +44,8 @@
-  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
-  * O_LARGEFILE is usually 0, so hardcode it here
-  */
--#define KERNEL_O_LARGEFILE 00100000
-+//#define KERNEL_O_LARGEFILE 00100000
-+#define KERNEL_O_LARGEFILE O_LARGEFILE
- 
- /* command line options */
- static char* option_output = NULL;

fatrace/patches/002-fflush.patch

@@ -1,12 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index b7d1560..6179272 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
-         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
-     }
-     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
-+    fflush(stdout);
- }
- 
- /**

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,64 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.1.4
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=$(PKG_GIGASET_ELEMENTS_VERSION)
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -1,62 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=GPLv2
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	/* [ln] todo: dummy implementation */
-	int len;
-
-	len = sprintf(buf, "%d\n", 123);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}

gryphon-led-module/src/sk9822_bitbang.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */

ice-client/Config.in

@@ -1,4 +1,4 @@
 
-config WIFILIFE_OPEN
+config ICE_OPEN
        bool "Use pre-compiled version for Open SDK"
        default n

ice-client/Makefile

@@ -0,0 +1,988 @@
+include $(TOPDIR)/rules.mk
+
+# We use the foldername as main package name
+PKG_NAME:=ice-client
+
+CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
+CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
+$(info Building package: $(PKG_NAME))
+$(info Building with additional modules: $(CFMODULES))
+export CFMODULES
+
+export HOME_DIR:=$(TOPDIR)
+
+export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
+
+export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
+export LOGIN:=$(shell whoami)
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC11
+PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
+export PKG_VERSION
+
+###########################--RELEASE--################################
+
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
+ifeq ($(CONFIG_ICE_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
+else
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+endif
+
+
+###########################--RELEASE--################################
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ice-client/Default
+	CATEGORY:=Utilities
+	URL:=http://inteno.se/
+	DEPENDS:= ice-client
+endef
+
+define Package/ice-client
+$(call Package/ice-client/Default)
+	TITLE:=ice-client
+	MENU:=1
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+endef
+
+define Package/ice-client/config
+	source "$(SOURCE)/Config.in"
+endef
+
+###########################--DEVELOPMENT--################################
+# Development settings
+# Uncomment stuff  Build/Prepare
+#
+# Plus make sure to comment and provide the following lines above
+# #PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+# #PKG_SOURCE_VERSION:=a11bf64e6b1054803b52750aabd71bf440ff6e16
+# #PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+# #PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
+# 
+# PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+# 
+#
+# These settings allow you to specify a soruce folder where your source code is located
+# This avoids having to tar-zip or fetch from git each time
+# Changes can be done in your sources while the build is performed somewhere else
+# If you forget some settings, your source folder will be deleted!!! So be carefull and 
+# check in or backup your sources first before doing this.
+#
+#define Build/Prepare
+#	rm -rf $(PKG_BUILD_DIR)
+#	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
+#endef
+
+###########################--DEVELOPMENT--################################
+
+
+#
+# Specify where and how to install the program. Since we only have one file,
+# the helloworld executable, install it by copying it to the /bin directory on
+# the router. The $(1) variable represents the root directory on the router running
+# OpenWrt. The $(INSTALL_DIR) variable contains a command to prepare the install
+# directory if it does not already exist.  Likewise $(INSTALL_BIN) contains the
+# command to copy the binary file from its current location (in our case the build
+# directory) to the install directory.
+
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Build/Compile
+endef
+else
+define Build/Configure
+	echo $(BASE_PKG_VERSION)-$(PKG_RELEASE) > $(PKG_BUILD_DIR)/core/version.txt
+	echo $(DATE) > $(PKG_BUILD_DIR)/core/date.txt
+	echo $(LOGIN) > $(PKG_BUILD_DIR)/core/login.txt
+	$(MAKE) -C $(PKG_BUILD_DIR) config
+endef
+
+define Build/Clean
+	$(MAKE) -C $(PKG_BUILD_DIR) clean
+endef
+endif
+
+define Package/ice-client/preinst
+#!/bin/sh
+echo "backup current config"
+if [ -f "/etc/iopsys/server.ini" ]; then
+	cp /etc/iopsys/server.ini /tmp/iopsysserver.ini
+fi
+if [ -f "/etc/config/ice" ]; then
+	cp /etc/config/ice /tmp/ice.back
+fi
+exit 0
+endef
+
+ifeq ($(CONFIG_ICE_OPEN),y)
+define Package/ice-client/install
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+endef
+else
+define Package/ice-client/install
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/result
+	$(CP) $(PKG_BUILD_DIR)/scripts/scheduleiperf.sh $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/etc/config
+	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/iopsys
+	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
+	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
+	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
+	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates
+	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
+endef
+endif
+
+define Package/ice-client/postinst
+#!/bin/sh
+echo "Enabling rc.d symlink for iopsys"
+cp /tmp/iopsysserver.ini /etc/iopsys/server.ini 
+rm -f /tmp/iopsysserver.ini 
+cp /tmp/ice.back /etc/config/ice 
+rm -f /tmp/ice.back
+if [ -f "/etc/rc.d/S98ice-client" ]; then
+	/etc/init.d/ice-client restart
+fi
+exit 0
+endef
+
+# Additional modules
+ifneq ($(CONFIG_ICE_OPEN),y)
+# Camerawatch
+define Package/ice-client-camerawatch
+$(call Package/ice-client/Default)
+TITLE:=Camerawatch
+DEPENDS+= +libjpeg 
+endef
+
+define Package/ice-client-camerawatch/description
+Camerawatch module for ice-client
+endef
+
+define Package/ice-client-camerawatch/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=cameramanager" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-camerawatch/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=cameramanager" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-camerawatch/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/etc/iopsys
+	$(CP) $(PKG_BUILD_DIR)/core/lib/camerawatch.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-camerawatch/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=camerawatch.so.1.0.1" package="ice-client-camerawatch" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Guest
+define Package/ice-client-guest
+  $(call Package/ice-client/Default)
+  TITLE:=Guest
+  DEPENDS+= 
+endef
+
+define Package/ice-client-guest/description
+Guest module for ice-client
+endef
+
+define Package/ice-client-guest/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=guestMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-guest/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=guestMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-guest/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/guestService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-guest/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=guestService.so.1.0.1" package="ice-client-guest" > /tmp/cfin
+fi
+exit 0
+endef
+
+# OpenVPN
+define Package/ice-client-openvpn
+  $(call Package/ice-client/Default)
+  TITLE:=OpenVPN
+  DEPENDS+= +openvpn
+endef
+
+define Package/ice-client-openvpn/description
+OpenVPN module for ice-client
+endef
+
+define Package/ice-client-openvpn/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=ovpnMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-openvpn/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=ovpnMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-openvpn/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/ovpnService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-openvpn/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=ovpnService.so.1.0.1" package="ice-client-openvpn" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Anyfi
+define Package/ice-client-anyfi
+  $(call Package/ice-client/Default)
+  TITLE:=AnyFi
+  DEPENDS+= 
+endef
+
+define Package/ice-client-anyfi/description
+AnyFi module for ice-client
+endef
+
+define Package/ice-client-anyfi/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=anyfiMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-anyfi/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=anyfiMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-anyfi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/anyfiService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-anyfi/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=anyfiService.so.1.0.1" package="ice-client-anyfi" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Netrounds
+define Package/ice-client-netrounds
+  $(call Package/ice-client/Default)
+  TITLE:=Netrounds
+  DEPENDS+= 
+endef
+
+define Package/ice-client-netrounds/description
+Netrounds module for ice-client
+endef
+
+define Package/ice-client-netrounds/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=netroundsMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-netrounds/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=netroundsMgr" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-netrounds/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/netroundsService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-netrounds/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	/bin/echo "system moduleAdd file=netroundsService.so.1.0.1" package="ice-client-netrounds" > /tmp/cfin
+fi
+exit 0
+endef
+
+# Logreader
+define Package/ice-client-logreader
+  $(call Package/ice-client/Default)
+  TITLE:=LogReader
+  DEPENDS+= 
+endef
+
+define Package/ice-client-logreader/description
+Logread module for ice-client
+endef
+
+define Package/ice-client-logreader/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=log" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-logreader/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  /bin/echo "system moduleRemove topic=log" > /tmp/cfin
+  /bin/sleep 3
+fi
+exit 0
+endef
+
+define Package/ice-client-logreader/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/logService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-logreader/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=logService.so.1.0.1" package="ice-client-logreader" > /tmp/cfin
+fi
+exit 0
+endef
+
+
+# fileme
+define Package/ice-client-fileme
+  $(call Package/ice-client/Default)
+  TITLE:=FileMe
+  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
+endef
+
+define Package/ice-client-fileme/description
+FileMe module for ice-client
+endef
+
+define Package/ice-client-fileme/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=fileMeMgr" > /tmp/cfin
+  /bin/sleep 2
+fi
+exit 0
+endef
+
+define Package/ice-client-fileme/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=fileMeMgr" > /tmp/cfin
+  /bin/sleep 2
+fi
+exit 0
+endef
+
+define Package/ice-client-fileme/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/filemeService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/lighttpd/conf.d
+	$(CP) $(PKG_BUILD_DIR)/scripts/fileme/mime.conf $(1)/etc/iopsys/fileme/lighttpd
+	$(CP) $(PKG_BUILD_DIR)/scripts/fileme/conf.d/10-webdav.conf $(1)/etc/iopsys/fileme/lighttpd/conf.d
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/docroot/dav
+	$(INSTALL_DIR) $(1)/etc/iopsys/fileme/docroot/shares
+endef
+
+define Package/ice-client-fileme/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=filemeService.so.1.0.1" package="ice-client-fileme" > /tmp/cfin
+fi
+exit 0
+endef
+
+# example
+define Package/ice-client-example
+  $(call Package/ice-client/Default)
+  TITLE:=example
+  DEPENDS+= 
+endef
+
+define Package/ice-client-example/description
+example module for ice-client
+endef
+
+define Package/ice-client-example/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=example" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-example/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=example" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-example/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/exampleService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-example/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=exampleService.so.1.0.1" package="ice-client-example" > /tmp/cfin
+fi
+exit 0
+endef
+
+# iperf
+define Package/ice-client-iperf
+  $(call Package/ice-client/Default)
+  TITLE:=iperf
+  DEPENDS+= 
+endef
+
+define Package/ice-client-iperf/description
+iperf module for ice-client
+endef
+
+define Package/ice-client-iperf/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=iperfMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-iperf/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=iperfMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-iperf/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/iperfService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
+	$(INSTALL_DIR) $(1)/bin/ifs/iperf/result
+	$(CP) $(PKG_BUILD_DIR)/scripts/scheduleiperf.sh $(1)/bin/ifs/iperf/execute
+endef
+
+define Package/ice-client-iperf/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=iperfService.so.1.0.1" package="ice-client-iperf" > /tmp/cfin
+fi
+exit 0
+endef
+
+# rshell
+define Package/ice-client-rshell
+  $(call Package/ice-client/Default)
+  TITLE:=rshell
+  DEPENDS+= 
+endef
+
+define Package/ice-client-rshell/description
+rshell module for ice-client
+endef
+
+define Package/ice-client-rshell/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rshellMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rshell/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rshellMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rshell/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/rshellService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-rshell/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=rshellService.so.1.0.1" package="ice-client-rshell" > /tmp/cfin
+fi
+exit 0
+endef
+
+# rework
+define Package/ice-client-rework
+  $(call Package/ice-client/Default)
+  TITLE:=rework
+  DEPENDS+= 
+endef
+
+define Package/ice-client-rework/description
+rework module for ice-client
+endef
+
+define Package/ice-client-rework/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rework/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-rework/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/reworkService.so.1.0.1 $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/modules/rework/sshpass-1.05/obj/iopsys/sshpass $(1)/bin
+endef
+
+define Package/ice-client-rework/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=reworkService.so.1.0.1" package="ice-client-rework" > /tmp/cfin
+fi
+exit 0
+endef
+
+# sip
+define Package/ice-client-sip
+  $(call Package/ice-client/Default)
+  TITLE:=sip
+  DEPENDS+= 
+endef
+
+define Package/ice-client-sip/description
+sip module for ice-client
+endef
+
+define Package/ice-client-sip/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-sip/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-sip/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/sipService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-sip/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=sipService.so.1.0.1" package="ice-client-sip" > /tmp/cfin
+fi
+exit 0
+endef
+
+# monitor
+define Package/ice-client-monitor
+  $(call Package/ice-client/Default)
+  TITLE:=monitor
+  DEPENDS+= 
+endef
+
+define Package/ice-client-monitor/description
+monitor module for ice-client
+endef
+
+define Package/ice-client-monitor/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-monitor/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-monitor/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/monitorService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-monitor/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=monitorService.so.1.0.1" package="ice-client-monitor" > /tmp/cfin
+fi
+exit 0
+endef
+
+# gigaset
+define Package/ice-client-gigaset
+  $(call Package/ice-client/Default)
+  TITLE:=gigaset
+  DEPENDS+= 
+endef
+
+define Package/ice-client-gigaset/description
+gigaset module for ice-client
+endef
+
+define Package/ice-client-gigaset/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-gigaset/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-gigaset/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/gigasetService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-gigaset/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=gigasetService.so.1.0.1" package="ice-client-gigaset" > /tmp/cfin
+fi
+exit 0
+endef
+
+# texec
+define Package/ice-client-texec
+  $(call Package/ice-client/Default)
+  TITLE:=texec
+  DEPENDS+= 
+endef
+
+define Package/ice-client-texec/description
+remote script execution module for ice-client
+endef
+
+define Package/ice-client-texec/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-texec/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+# bmspeedtest
+define Package/ice-client-bcmspeedmgr
+  $(call Package/ice-client/Default)
+  TITLE:=bcmspeedmgr
+  DEPENDS+= 
+endef
+
+define Package/ice-client-bcmspeedmgr/description
+bcmspeedmgr module for ice-client
+endef
+
+define Package/ice-client-bcmspeedmgr/install
+	$(INSTALL_DIR) $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
+endef
+
+define Package/ice-client-bcmspeedmgr/postinst
+#!/bin/sh
+/etc/init.d/bcmspeedtestservice stop
+/etc/init.d/bcmspeedtestservice start
+exit 0
+endef
+
+endif
+
+# This line executes the necessary commands to compile our program.
+# The above define directives specify all the information needed, but this
+# line calls BuildPackage which in turn actually uses this information to
+# build a package.
+$(eval $(call BuildPackage,ice-client))
+ifneq ($(CONFIG_ICE_OPEN),y)
+$(eval $(call BuildPackage,ice-client-guest))
+$(eval $(call BuildPackage,ice-client-camerawatch))
+$(eval $(call BuildPackage,ice-client-openvpn))
+$(eval $(call BuildPackage,ice-client-anyfi))
+$(eval $(call BuildPackage,ice-client-netrounds))
+$(eval $(call BuildPackage,ice-client-logreader))
+$(eval $(call BuildPackage,ice-client-fileme))
+$(eval $(call BuildPackage,ice-client-example))
+$(eval $(call BuildPackage,ice-client-iperf))
+$(eval $(call BuildPackage,ice-client-rshell))
+$(eval $(call BuildPackage,ice-client-rework))
+$(eval $(call BuildPackage,ice-client-sip))
+$(eval $(call BuildPackage,ice-client-monitor))
+$(eval $(call BuildPackage,ice-client-gigaset))
+$(eval $(call BuildPackage,ice-client-texec))
+$(eval $(call BuildPackage,ice-client-bcmspeedmgr))
+endif

icgroupd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2016 Inteno Broadband AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.

icwmp/Config.in

@@ -15,13 +15,33 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+choice
+	prompt "enable xmpp feature"
+	default disable
+
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
-    
-endif
 
+endif

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,17 +8,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-10-01
+PKG_VERSION:=3.0-2016-07-04
 PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ed781436f96f2dc3cf58b35adc640c6f9f6783d1
+PKG_SOURCE_VERSION:=bbd3867e3158e9942a5b930747abf45a041a05ec
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -32,46 +30,11 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/icwmp_stun
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 stun Client
-	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
-endef
-
-define Package/icwmp_xmpp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 xmpp feature
-	DEPENDS:=+libuci +libubox +libexpat +libstrophe
-endef
-
-define Package/icwmp_twamp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 twamp feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_udpechoserver
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 udpechoserver feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_bulkdata
- SECTION:=utils
- CATEGORY:=Utilities
- TITLE:=TR-069 BulkData Collection
- DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm +(PACKAGE_libtr098):libtr098
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl
 endef
 
 define Package/icwmp/description
@@ -93,7 +56,7 @@ define Package/icwmp-zstream
 endef
 
 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
+	source "$(SOURCE)/Config.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -103,10 +66,6 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -126,7 +85,10 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
+
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -158,23 +120,13 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-CONFIGURE_ARGS += \
-	--enable-tr098
-endif
-
-CONFIGURE_ARGS += \
-	--enable-tr181
-
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
-endif
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
@@ -186,54 +138,8 @@ ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
-	$(CP) ./files/* $(1)/
-endef
-
-define Package/icwmp_stun/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
-endef
-
-define Package/icwmp_xmpp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
-endef
-
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
-define Package/icwmp_bulkdata/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
 endef
 
 define Package/icwmp-$(BUILD_VARIANT)/postinst
@@ -255,10 +161,6 @@ define Package/icwmp-$(BUILD_VARIANT)/prerm
 	exit 0
 endef
 
+
 $(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,icwmp_stun))
-$(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
-$(eval $(call BuildPackage,icwmp_bulkdata))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	local prevopt43url=""
-	local curopt43url=""
-	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
-	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,54 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
-set_cwmp_reqopts
-regenerate_ssl_link

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-[ -f /etc/config/cwmp_xmpp ] || exit 0
-
-[ "$ACTION" == "ifup" ] || exit 0
-[ "$INTERFACE" == "loopback" ] && exit 0
-
-local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-/etc/init.d/icwmp_xmppd reload &
-

ifbt/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.2
-
-PKG_SOURCE_VERSION:=f6edff47b6c0a154ab892301acf767d19ac8ad73
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=README
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

ifsi/Makefile

@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2015 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifsi
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+define Package/ifsi
+  CATEGORY:=Utilities
+  DEPENDS:=+ubus +libubox
+  TITLE:=Inteno Functional Script Interface
+endef
+
+define Package/ifsi/description
+	Inteno Functional Script Interface
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/ifsi/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifsi))

ifsi/src/Makefile

@@ -0,0 +1,17 @@
+CC		= gcc
+CFLAGS		= -g -Wall
+LOCLIBS		= 
+LIBS		= -lubus -lubox -lblobmsg_json
+OBJS		= ifsi.o
+SRCS		= ifsi.c
+LIBSRCS		= 
+ISRCS		= 
+
+all: ifsi
+
+ifsi: ${OBJS}
+	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
+
+clean:
+	rm -f ifsi *.o
+

ifsi/src/ifsi.c

@@ -0,0 +1,74 @@
+/*
+ * ifsi -- Inteno functional script interface
+ *
+ * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
+ *
+ * Author: dev@inteno.se
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <unistd.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/uloop.h>
+
+#include <libubus.h>
+
+static struct ubus_context *ctx;
+static struct ubus_event_handler event_listener;
+static struct blob_buf b;
+
+
+static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
+			  const char *type, struct blob_attr *msg)
+{
+	char *str;
+	uint32_t id;
+
+	str = blobmsg_format_json(msg, true);
+	fprintf(stdout, "I got %s event %s\n", type, str);
+	free(str);
+}
+
+int main(int argc, char **argv)
+{
+	const char *ubus_socket = NULL;
+	int ret;
+
+	uloop_init();
+
+	ctx = ubus_connect(ubus_socket);
+	if (!ctx) {
+		fprintf(stderr, "Failed to connect to ubus\n");
+		return 1;
+	}
+
+	ubus_add_uloop(ctx);
+
+	event_listener.cb = receive_event;
+	ret = ubus_register_event_handler(ctx, &event_listener, "*");
+	if (ret)
+		fprintf(stderr, "Couldn't register to router events\n");
+
+	uloop_run();
+
+	ubus_free(ctx);
+	uloop_done();
+
+	return 0;
+}
+

imonitor/Makefile

@@ -1,44 +0,0 @@
-#
-# Copyright (C) 2018 iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_SOURCE_PROTO=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/imonitor
-	CATEGORY:=Utilities
-	TITLE:=iopsysWrt process supervisor
-	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
-endef
-
-define Package/imonitor/description
-	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
-endef
-
-define Package/imonitor/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-endef
-
-$(eval $(call BuildPackage,imonitor))

imonitor/files/etc/config/imonitor

@@ -1,9 +0,0 @@
-config monitor
-	option app 'test'
-	option test 'echo test'
-	option stream 'stdout'
-	option string_match 'TEST'
-	option execute 'echo executing test'
-	option interval '10'
-	option nr_tests '2'
-

imonitor/files/etc/init.d/imonitor

@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the imonitor
-#
-
-START=99
-STOP=01
-
-USE_PROCD=1
-NAME=imonitor
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "imonitor"
-	procd_set_param stdout 1
-        procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop() {
-	service_stop imonitor
-}
-
-reload_service() {
-	stop
-	start
-}
-

inbd/Makefile

@@ -1,56 +0,0 @@
-#
-# Copyright (C) 2016 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=iopsys Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))

inotify-tools/Makefile

@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

inteno-netmodes/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2016 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=inteno-netmodes
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inteno-netmodes
+  CATEGORY:=Base system
+  TITLE:=Predefined Network Modes
+endef
+
+define Package/inteno-netmodes/description
+	Predefined Network Modes
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/inteno-netmodes/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/config/netmode

@@ -3,7 +3,3 @@ config mode 'setup'
         option detail ''
         option curmode 'routed'
 
-config tools 'tools'
-	option wificontrol 0
-	option arp_discovery 1
-

inteno-netmodes/files/etc/init.d/netmode

@@ -0,0 +1,154 @@
+#!/bin/sh /etc/rc.common
+
+START=10
+USE_PROCD=1
+
+. /usr/share/libubox/jshn.sh
+. /lib/network/config.sh
+
+local modedir=$(uci -q get netmode.setup.dir)
+[ -n "$modedir" ] || modedir="/etc/netmodes"
+
+get_device() {
+	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
+	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
+        local cnt=1
+        local idx=0
+
+	local pnum=$(echo $PORT_NAMES | wc -w)
+
+	if [ $pnum -le 2 ]; then
+		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
+	fi
+
+	# get index of interface name
+	for i in $PORT_NAMES; do
+		if [ "$i" == "$1" ]; then
+			idx=$cnt
+		fi
+		cnt=$((cnt+1))
+	done
+
+        # get port name from index
+	cnt=1
+	for i in $PORT_ORDER; do
+		if [ "$cnt" == "$idx" ]; then
+			echo $i
+		fi
+		cnt=$((cnt+1))
+	done
+}
+
+populate_netmodes() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	delete_netmode() {
+		uci delete netmode.$1
+	}
+
+	config_load netmode
+
+	config_foreach delete_netmode netmode
+	uci commit netmode
+
+	wan=$(get_device WAN)
+	lan1=$(get_device LAN1)
+	lan2=$(get_device LAN2)
+	lan3=$(get_device LAN3)
+	lan4=$(get_device LAN4)
+	lan5=$(get_device LAN5)
+
+	for file in $(find $modedir -type f); do
+		grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+		grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
+		grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
+		grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
+		grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
+	done
+
+	local hardware=$(db get hw.board.hardware)
+	local keys lang desc exp exclude
+	for mode in $(ls $modedir); do
+			lang=""
+			desc=""
+			exp=""
+			uci -q set netmode.$mode=netmode
+			uci -q set netmode.$mode.conf=$mode
+			json_load "$(cat $modedir/$mode/DETAILS)"
+
+			exclude=0
+			json_get_var excluded_boards excluded_boards
+			for board in $excluded_boards; do
+				if [ "$board" == "$hardware" ]; then
+					uci -q delete netmode.$mode
+					exclude=1
+					break
+				fi
+			done
+			[ $exclude -eq 1 ] && continue
+
+			json_select description
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var desc $lang
+				uci -q set netmode.$mode."desc_$lang"="$desc"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
+				json_select ..
+			done
+			json_select ..
+
+			json_select explanation
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var exp $lang
+				uci -q set netmode.$mode."exp_$lang"="$exp"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
+				json_select ..
+			done
+			json_select ..
+
+			json_get_var cred credentials
+			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var reboot reboot
+			uci -q set netmode.$mode.reboot="$reboot"
+	done
+	uci commit netmode
+}
+
+switch_netmode() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	config_load netmode
+
+	config_get curmode setup curmode
+	config_get conf $curmode conf
+	cp /etc/netmodes/$conf/* /etc/config/
+	rm -f /etc/config/DETAILS
+	sync
+	local reboot=$(uci -q get netmode.$curmode.reboot)
+	if [ "$reboot" == "0" ]; then
+		/etc/init.d/enviroment reload
+	else
+		reboot &
+	fi
+}
+
+start_service() {
+	populate_netmodes
+}
+
+reload_service() {
+        switch_netmode
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger netmode
+}
+

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -8,16 +8,6 @@
 		{ "sv" : "LAN4 port överbryggas med IPTV VLAN" }
 	],
 	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400",
-		"SDX810-AP",
-		"NORRLAND"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
+	"excluded_boards" : "CG300 CG301"
 }
 

inteno-netmodes/files/etc/netmodes/bridged/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -0,0 +1,23 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -0,0 +1,18 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -0,0 +1,37 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ipaddr '192.168.1.1'
+	option netmask '255.255.255.0'
+	option ifname '$LAN1 $LAN2 $LAN3'
+	option ip6assign '60'
+	
+config interface 'wan'
+	option type 'anywan'
+	option proto 'dhcp'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
+	option ifname 'ptm0.1 atm0.1 $WAN.1'
+	option ipv6 '1'
+
+config interface 'iptv'
+	option type 'bridge'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
+	option defaultroute '0'
+
+config interface 'wan6'
+	option proto 'dhcpv6'
+	option ifname '@wan'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -0,0 +1,13 @@
+{
+	"description": [
+		{ "en" : "VoIP + Bridged IPTV" },
+		{ "sv" : "VoIP + Brygg IPTV" }
+	],
+	"explanation": [
+		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
+		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
+	],
+	"credentials" : 0,
+	"excluded_boards" : "CG300 CG301"
+}
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -0,0 +1,114 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	list   network		'iptv'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -0,0 +1,34 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm2.1'
+        option baseifname 'atm2'
+        option atmtype 'ubr'
+        option name 'atm_voip'
+        option vpi '8'
+        option vci '55'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -0,0 +1,32 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'eth_voip'
+	option ifname '$WAN.200'
+	option baseifname '$WAN'
+	option vlan8021q '200'
+	option vlan8021p '0'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_voip'
+	option ifname 'ptm0.200'
+	option baseifname 'ptm0'
+	option vlan8021q '200'
+	option vlan8021p '0'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd

@@ -0,0 +1,18 @@
+
+config mcpd 'mcpd'
+	option igmp_query_response_interval '10'
+	option igmp_last_member_query_interval '10'
+	option igmp_robustness_value '2'
+	option igmp_lan_to_lan_multicast '0'
+	option igmp_max_groups '25'
+	option igmp_max_sources '10'
+	option igmp_max_members '25'
+	option igmp_fast_leave '1'
+	option igmp_join_immediate '0'
+	option igmp_proxy_enable '0'
+	option igmp_snooping_enable '2'
+	option igmp_snooping_interfaces 'br-iptv'
+	option igmp_default_version '2'
+	option igmp_query_interval '120'
+	option igmp_proxy_interfaces 'iptv'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network

@@ -18,8 +18,8 @@ config interface 'lan'
 config interface 'wan'
 	option type 'anywan'
 	option proto 'dhcp'
-	option hostname 'iopsys-$MAC'
-	option vendorid '$HARDWAREID'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
 	option ifname 'ptm0.1 atm0.1 $WAN.1'
 	option ipv6 '1'
 
@@ -28,39 +28,18 @@ config interface 'iptv'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
+	option defaultroute '0'
+
+config interface 'voip'
+	option type 'anywan'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.200 atm2.1 $WAN.200'
 	option defaultroute '0'
 
 config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-
-config device 'ethtv'
-	option type '8021q'
-	option name '$WAN.100'
-	option ifname '$WAN'
-	option vid '100'
-	option priority '0'
-
-config device 'ptmtv'
-	option type '8021q'
-	option name 'ptm0.100'
-	option ifname 'ptm0'
-	option vid '100'
-	option priority '0'
-

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -0,0 +1,13 @@
+{
+	"description": [
+		{ "en" : "Wireless Repeater" },
+		{ "sv" : "Trådlös Repeater" }
+	],
+	"explanation": [
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point." },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten." }
+	],
+	"credentials" : 1,
+	"reboot" : 0
+}
+

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT
@@ -19,7 +16,6 @@ config zone
 config zone
 	option name		wan
 	list   network		'wan'
-	list   network		'wan6'
 	option input		REJECT
 	option output		ACCEPT
 	option forward		REJECT
@@ -39,6 +35,16 @@ config rule
 	option dest_port	68
 	option target		ACCEPT
 	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
 
 # Allow IPv4 ping
 config rule
@@ -48,13 +54,7 @@ config rule
 	option icmp_type	echo-request
 	option family		ipv4
 	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
+	option hidden		1
 
 # Allow DHCPv6 replies
 # see https://dev.openwrt.org/ticket/10381
@@ -68,24 +68,13 @@ config rule
 	option dest_port	546
 	option family		ipv6
 	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
+	option hidden		1
 
 # Allow essential incoming IPv6 ICMP traffic
 config rule
 	option name		Allow-ICMPv6-Input
 	option src		wan
-	option proto	icmp
+	option proto		icmp
 	list icmp_type		echo-request
 	list icmp_type		echo-reply
 	list icmp_type		destination-unreachable
@@ -100,6 +89,7 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
+	option hidden		1
 
 # Allow essential forwarded IPv6 ICMP traffic
 config rule
@@ -117,37 +107,15 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
+	option hidden		1
 
 # include a file with users custom iptables rules
 config include
 	option path /etc/firewall.user
 	option reload 1
 
-# include a file with rules for prioritizing some specific packets
+# include a file with rules for SIP and RTP traffic
 config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
+	option path /etc/firewall.sip
 	option reload 1
 

inteno-netmodes/files/etc/netmodes/repeater/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -0,0 +1,24 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
+	option ifname '$WAN.1'
+	option reqopts '43'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater/uhttpd

@@ -0,0 +1,33 @@
+config uhttpd 'main'
+	list listen_http '0.0.0.0:80'
+	list listen_http '[::]:80'
+	list listen_http '0.0.0.0:8080'
+	list listen_http '[::]:8080'
+	list listen_http '0.0.0.0:8181'
+	list listen_http '[::]:8181'
+	list listen_https '0.0.0.0:443'
+	list listen_https '[::]:443'
+	option redirect_https '1'
+	option home '/www'
+	option rfc1918_filter '1'
+	option max_requests '3'
+	option max_connections '100'
+	option cert '/etc/uhttpd.crt'
+	option key '/etc/uhttpd.key'
+	option cgi_prefix '/cgi-bin'
+	option script_timeout '60'
+	option network_timeout '30'
+	option http_keepalive '20'
+	option tcp_keepalive '1'
+	option ubus_prefix '/ubus'
+
+config cert 'px5g'
+	option days '730'
+	option bits '1024'
+	option country 'ZZ'
+	option state 'Somewhere'
+	option location 'Uknown'
+	option commonname 'OpenWrt'
+
+config logopts 'logopts'
+

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -1,23 +1,20 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
 	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
+	option bandwidth '20'
+	option hwmode '11ac'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
-	option wmm_apsd '1'
+	option wmm_apsd '0'
 	option txpower '100'
 	option rateset 'default'
 	option frag '2346'
@@ -30,24 +27,24 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 
 config wifi-iface
 	option device 'wl0'
-	option network 'lan'
+	option network 'wan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
+	option ssid 'Inteno-$BSSID4'
 	option encryption 'psk2'
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
-	option ifname 'wl0'
+	option bss_max '32'
+	option autoconf '1'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -56,10 +53,10 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
-	option wmm_apsd '1'
+	option wmm_apsd '0'
 	option txpower '100'
 	option rateset 'default'
 	option frag '2346'
@@ -73,19 +70,32 @@ config wifi-device 'wl1'
 	option rifs_advert '0'
 	option maxassoc '32'
 	option doth '0'
+	option apsta '1'
 
 config wifi-iface
 	option device 'wl1'
-	option network 'lan'
+	option ifname 'wl1'
+	option network 'wan'
+	option mode 'wet'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option wps_pbc '0'
+	option wmf_bss_enable '1'
+	option autoconf '1'
+
+config wifi-iface
+	option device 'wl1'
+	option network 'wan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
-	option encryption 'mixed-psk'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
-	option ifname 'wl1'
+	option bss_max '32'
+	option autoconf '1'