questd: fix broken dependencies for Questd

Improved the logic to decrease the call response
Limit the logs to 100 to avoid ubus call timeout.

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.3.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
+PKG_SOURCE_VERSION:=5a5c94b289c79bc3a635b8d742dd9b73dcc0615f
 PKG_NAME:=dectmngr2
 
 

dslmngr/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dslmngr
+PKG_VERSION:=1.0.0
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+define Package/dslmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=XDSL status and configration utility
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
+endef
+
+define Package/dslmngr/description
+ This package can be used to configure and provide status about
+ the XDSL subsystem through UBUS.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/Compile
+	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
+endef
+
+define Package/dslmngr/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -0,0 +1,37 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utitie
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,10 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+	uci del_list firewall.easyqos._access_w="root"
+	uci add_list firewall.easyqos._access_w="root"
+        commit firewall
+EOT

easy-soc-libs/Config.in

@@ -15,5 +15,9 @@ config LIBDSL_DEBUG
 	bool "Enable xdsl debugging"
 	default n
 
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
 endmenu
 endif

easy-soc-libs/Makefile

@@ -5,15 +5,18 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.14
 PKG_RELEASE:=1
 
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7f884592aa42cc627542589d5b77cf4a50567536
+PKG_SOURCE_VERSION:=76a0b60abe97499e4fe83bffd5fd698ba8b336bc
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -34,43 +37,49 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-endef
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
 endef
 
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS:=+TARGET_iopsys_ramips:swconfig
+  DEPENDS+=+TARGET_iopsys_ramips:swconfig
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
   KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
   TARGET_PLATFORM=MARVELL
   TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
-  TARGET_PLATFORM=LANTIQ
-  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
 else
-  $(info (UNEXPECTED CONFIG TARGET))
+  $(info Unexpected CONFIG_TARGET)
 endif
 
+export TARGET_PLATFORM
+
 ifdef CONFIG_IOP_LLA_LIBS_DEBUG
   TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
 endif
 
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
+endef
+
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
@@ -78,15 +87,22 @@ subdirs := \
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
 	subdirs="$(subdirs)"
 
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
@@ -108,6 +124,12 @@ define Build/InstallDev/libethernet
 	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
 endef
 
+define Build/Compile
+	$(call Build/Compile/Default)
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
+endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
@@ -125,7 +147,11 @@ endef
 
 define Package/libdsl/install
 	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
 endef
 
 $(eval $(call BuildPackage,libwifi))

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
+PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)
@@ -17,8 +17,9 @@ BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=endptmngr-open
+PATCH_DIR:=
 else
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_NAME:=endptmngr

gryphon-led-module/Makefile

@@ -0,0 +1,62 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gryphon-led-kernel-module
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/$(PKG_NAME)
+  SUBMENU:=LED modules
+  TITLE:=LED driver for Gryphon
+  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
+  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  PKG_LICENSE:=Genexis
+  PKG_LICENSE_URL:=
+endef
+
+define KernelPackage/$(PKG_NAME)/description
+  This package contains the LED driver for Gryphon devices.
+endef
+
+EXTRA_KCONFIG:= CONFIG_RGB_LED=m
+
+MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) src/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
+		modules
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+endef
+
+$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -0,0 +1,26 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+MODULE_NAME  = gryphon-led-kernel-module
+
+obj-m  := $(MODULE_NAME).o
+
+GENEXIS_FILES= \
+	main.o \
+	sk9822.o \
+	sk9822_bitbang.o
+
+$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -0,0 +1,253 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+#include "sk9822.h"
+
+#define DRIVER_NAME			"canyon_led"
+#define DRIVER_AUTHOR		"Genexis B.V."
+#define DRIVER_DESC			"Canyon LED driver for SK9822"
+#define DRIVER_VERSION	"1"
+
+/**
+ * sysfs interfaces
+ */
+
+static ssize_t get_led_color(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	/* [ln] todo: dummy implementation */
+	int len;
+
+	len = sprintf(buf, "%d\n", 123);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set complete LED strip to a specific color
+ * @retval count number of bytes written
+ * @retval -EMSGSIZE if the message is too big
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_color(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	size_t buflen = count;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	/* strip newline */
+	if ((count > 0) && (buf[count-1] == '\n')) {
+		buflen--;
+	}
+
+	if (buflen != 6) { // RRGGBB\0
+		return -EMSGSIZE;
+	}
+
+	// Update the LED array here
+	ret = sk9822_set_color_str(sk9822, buf);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set led color\n");
+		return -EIO;
+	}
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
+
+static struct attribute *sk9822_dev_attrs[] = {
+	 &dev_attr_led_color.attr,
+	 NULL
+};
+
+static struct attribute_group sk9822_dev_attr_group = {
+	.name = "sk9822",
+	.attrs = sk9822_dev_attrs,
+};
+
+/**
+ * device prope and removal
+ */
+
+static int canyon_led_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sk9822_leds *leds;
+
+	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds) {
+		return -ENOMEM;
+	}
+	leds->dev = &pdev->dev;
+	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
+
+	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Could not read led-count property\n");
+		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	}
+
+	leds->led_colors = devm_kzalloc(&pdev->dev,
+			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
+	if (!leds->led_colors) {
+		return -ENOMEM;
+	}
+
+
+	platform_set_drvdata(pdev, leds);
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->clock_gpio, 1);
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	} else {
+		printk(KERN_INFO "Got clock gpio\n");
+		gpiod_set_value(leds->clock_gpio, 0);
+	}
+
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+
+	gpiod_direction_output(leds->data_gpio, 1);
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	} else {
+		printk(KERN_INFO "Got data gpio\n");
+		gpiod_set_value(leds->data_gpio, 0);
+	}
+
+	printk(KERN_INFO "Attempt to set filefs stuff\n");
+	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+
+#if 0
+	printk(KERN_INFO "Flash LEDs to verify they work\n");
+	sk9822_set_color_str(leds, "00FF00");
+	sk9822_update(leds);
+	msleep(200);
+	sk9822_set_color_str(leds, "000000");
+	sk9822_update(leds);
+#endif
+
+	printk(KERN_INFO "canyon led successfully probed\n");
+
+	return 0;
+}
+
+static int canyon_led_remove(struct platform_device *pdev)
+{
+	struct sk9822_leds *leds;
+
+	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+
+	leds = platform_get_drvdata(pdev);
+	if (IS_ERR(leds)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -1;
+	}
+
+	if (leds->clock_gpio) {
+		gpiod_put(leds->clock_gpio);
+	}
+
+	if (leds->data_gpio) {
+		gpiod_put(leds->data_gpio);
+	}
+
+	printk(KERN_NOTICE "Bye, bye\n");
+
+	return 0;
+}
+
+/**
+ * platform driver metadata
+ */
+
+static const struct of_device_id canyon_led_of_ids[] = {
+	{ .compatible = "canyon,led" },
+	{ }
+};
+
+static struct platform_driver canyon_led = {
+	.probe = &canyon_led_probe,
+	.remove = &canyon_led_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = canyon_led_of_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
+module_platform_driver(canyon_led);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+#include "sk9822_bitbang.h"
+
+cRGB __hexs_to_rgb(const char *hex)
+{
+	cRGB rgb;
+	int r, g, b;
+
+	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
+	// This needs sanity checking
+	rgb.r = r;
+	rgb.g = g;
+	rgb.b = b;
+	return rgb;
+}
+
+/**
+ * @brief update the color over the given device struct to the provided HEX color
+ */
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
+{
+	int i;
+	cRGB color = __hexs_to_rgb(hex);
+
+	for (i = 0; i < sk9822->led_count; i++) {
+		sk9822->led_colors[i] = color;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief write device struct to the device
+ */
+int sk9822_update(struct sk9822_leds *sk9822)
+{
+	uint16_t i;
+	uint16_t led_count = sk9822->led_count;
+
+	// Start Frame
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+
+	for (i = 0; i < led_count; i++) {
+		cRGB *p = &sk9822->led_colors[i];
+		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
+		sk9822_bb_write(sk9822, p->b);
+		sk9822_bb_write(sk9822, p->g);
+		sk9822_bb_write(sk9822, p->r);
+	}
+
+	// End frame
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+
+	return 0;
+}

gryphon-led-module/src/sk9822.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef SK9822_H_
+#define SK9822_H_
+
+#include <linux/types.h>
+
+#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
+#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+
+typedef struct {
+	uint8_t b;
+	uint8_t g;
+	uint8_t r;
+} cRGB;   // BGR (SK9822 Standard)
+
+struct sk9822_leds {
+	struct device *dev;
+	struct gpio_desc *clock_gpio;
+	struct gpio_desc *data_gpio;
+
+	cRGB *led_colors;
+	uint8_t led_brightness;
+	uint16_t led_count;
+};
+
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
+int sk9822_update(struct sk9822_leds *sk9822);
+
+#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+/**
+ * @brief Bitbang write operation CLOCK+DATA
+ *
+ * Assumed state before call: CLOCK- Low, DATA- High
+ */
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8 ; i++) {
+		if (!(c&0x80)) {
+			gpiod_set_value(sk9822->data_gpio, 0); // set data low
+		} else {
+			gpiod_set_value(sk9822->data_gpio, 1); // set data high
+		}
+
+		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
+		c <<= 1;
+		udelay(1); // stretch clock
+		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
+	}
+
+	// State after call: SCK Low, Data high
+}

gryphon-led-module/src/sk9822_bitbang.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _SK9822_BB_H_
+#define _SK9822_BB_H_
+
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
+
+#endif /* _SK9822_BB_H_ */

ice-client/Config.in

@@ -1,4 +0,0 @@
-
-config ICE_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

ice-client/files/ice-client.uci_default

@@ -1,72 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
-}
-
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q del_list passwords.ice._access_w=root
-uci -q add_list passwords.ice._access_w=root
-uci -q commit passwords
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_w 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-
-EOF
-}
-
-uci -q del_list dhcp.@domain[0].name="inteno.lan"
-uci -q add_list dhcp.@domain[0].name="inteno.lan"
-uci -q commit dhcp
-
-exit 0
-

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-01-17
+PKG_VERSION:=4.0-2019-11-19
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=88edf3d3c6d6d115425f312e36cbb731cd8fe863
+PKG_SOURCE_VERSION:=7491e611712afb6ebf88098a099b25ef8c2f0a8b
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,6 +51,20 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
+define Package/icwmp_twamp
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 twamp feature
+	DEPENDS:=+libuci
+endef
+
+define Package/icwmp_udpechoserver
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 udpechoserver feature
+	DEPENDS:=+libuci
+endef
+
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
@@ -201,6 +215,25 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
+	$(CP) ./xmpp-files/* $(1)/
+endef
+
+define Package/icwmp_udpechoserver/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
+endef
+
+define Package/icwmp_twamp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
 endef
 
 define Build/InstallDev
@@ -238,4 +271,6 @@ $(eval $(call BuildPackage,icwmp-curl))
 $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp_udpechoserver))
+$(eval $(call BuildPackage,icwmp_twamp))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -41,4 +41,14 @@ set_cwmp_reqopts() {
 	fi
 }
 
+regenerate_ssl_link(){
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
 set_cwmp_reqopts
+regenerate_ssl_link

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+[ -f /etc/config/cwmp_xmpp ] || exit 0
+
+[ "$ACTION" == "ifup" ] || exit 0
+[ "$INTERFACE" == "loopback" ] && exit 0
+
+local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+local islan="$(uci -q get network.$INTERFACE.is_lan)"
+[ "$islan" == "1" ] && exit 0
+
+local proto="$(uci -q get network.$INTERFACE.proto)"
+[ "$proto" == "none" ] && exit 0
+
+local ifname="$(uci -q get network.$INTERFACE.ifname)"
+[ "${ifname:0:1}" == "@" ] && exit 0
+
+/etc/init.d/icwmp_xmppd reload &
+

ifbt/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2013 Inteno
+# Copyright (C) 2018 iopsys Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifbt
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
+PKG_SOURCE_VERSION:=295262590c00e0e6683a51d28f6107b4678ebb8c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -18,6 +18,22 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+TARGET_PLATFORM:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+TARGET_PLATFORM:=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+TARGET_PLATFORM:=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
+else
+$(info (UNEXPECTED CONFIG TARGET))
+endif
+
+export TARGET_PLATFORM
+
 define Package/ifbt
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c

imonitor/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
@@ -15,7 +15,6 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
@@ -24,7 +23,7 @@ include $(INCLUDE_DIR)/cmake.mk
 
 define Package/imonitor
 	CATEGORY:=Utilities
-	TITLE:=Inteno process supervisor
+	TITLE:=iopsysWrt process supervisor
 	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
 endef
 

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 Inteno
+# Copyright (C) 2016 iopsys
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
+PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
+	TITLE:=iopsys Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

iop/Makefile

@@ -20,7 +20,7 @@ define Package/iop
 endef
 
 define Package/iop/description
-	This package contains Intenos Iop utilities
+	This package contains iopsysWrt SDK utilities
 endef
 
 define Build/Compile

iop/config

@@ -3,11 +3,9 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
-# CONFIG_LOCALMIRROR is not set
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
@@ -17,57 +15,35 @@ CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
 CONFIG_PACKAGE_gdb=m
-CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_ice-client=y
-CONFIG_PACKAGE_ice-client-camerawatch=m
-CONFIG_PACKAGE_ice-client-fileme=m
-CONFIG_PACKAGE_ice-client-gigaset=m
-CONFIG_PACKAGE_ice-client-guest=m
-CONFIG_PACKAGE_ice-client-iperf=m
-CONFIG_PACKAGE_ice-client-logreader=m
-CONFIG_PACKAGE_ice-client-monitor=m
-CONFIG_PACKAGE_ice-client-netrounds=m
-CONFIG_PACKAGE_ice-client-rshell=m
-CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_ifbt=y
 CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_iperf-mt=y
+CONFIG_PACKAGE_iopupgrade=y
+CONFIG_PACKAGE_ip-full=y
+CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_iup=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-broadcom-iptv=y
-CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-config-backup=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-config-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-iup=y
-# CONFIG_PACKAGE_juci-qos is not set
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-natalie-dect=y
+CONFIG_PACKAGE_juci-mwan3=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
 CONFIG_PACKAGE_juci-network-dsl=y
@@ -75,24 +51,20 @@ CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-network-port=y
 CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
-CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
-CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-utils=y
-# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
-CONFIG_PACKAGE_kmod-nls-base=y
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
-CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
@@ -100,14 +72,10 @@ CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mtd-utils=y
-CONFIG_PACKAGE_mtd-utils-deubinize=y
-CONFIG_PACKAGE_mtd-utils-imagewrite=y
-CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
-CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -116,7 +84,6 @@ CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
-# CONFIG_PACKAGE_p910nd is not set
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
@@ -155,7 +122,7 @@ CONFIG_PACKAGE_wifimngr=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="INT"
+CONFIG_TARGET_CUSTOMER="IOPSYS"
 CONFIG_TARGET_ROOTFS_TARGZ=y
 # CONFIG_USE_SSTRIP is not set
 CONFIG_USE_STRIP=y
@@ -187,7 +154,6 @@ CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -201,11 +167,9 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
@@ -215,7 +179,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -224,7 +187,6 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_PACKAGE_iopupgrade=y
+CONFIG_LOCALMIRROR="http://download.iopsys.eu/iopsys/mirror/"
 

iop/configs/luci.diff

@@ -1,38 +0,0 @@
-CONFIG_PACKAGE_luci=y
-CONFIG_PACKAGE_luci-mod-admin-core=y
-CONFIG_PACKAGE_luci-mod-admin-full=y
-CONFIG_PACKAGE_luci-app-ddns=y
-CONFIG_PACKAGE_luci-app-dslstats=y
-CONFIG_PACKAGE_luci-app-firewall=y
-CONFIG_PACKAGE_luci-app-iup=y
-CONFIG_PACKAGE_luci-app-mcpd=y
-CONFIG_PACKAGE_luci-app-minidlna=y
-CONFIG_PACKAGE_luci-app-multiwan=y
-CONFIG_PACKAGE_luci-app-p910nd=y
-CONFIG_PACKAGE_luci-app-parental-control=y
-CONFIG_PACKAGE_luci-app-port-management=y
-CONFIG_PACKAGE_luci-app-power-mgmt=y
-CONFIG_PACKAGE_luci-app-samba=y
-CONFIG_PACKAGE_luci-app-sfp=y
-CONFIG_PACKAGE_luci-app-snmp=y
-CONFIG_PACKAGE_luci-app-speedtest=y
-CONFIG_PACKAGE_luci-app-upnp=y
-CONFIG_PACKAGE_luci-app-voice=y
-CONFIG_PACKAGE_luci-theme-base=y
-CONFIG_PACKAGE_luci-theme-bootstrap=y
-CONFIG_PACKAGE_luci-i18n-english=y
-CONFIG_PACKAGE_luci-proto-3g=y
-CONFIG_PACKAGE_luci-proto-4g=y
-CONFIG_PACKAGE_luci-proto-core=y
-CONFIG_PACKAGE_luci-proto-ipv6=y
-CONFIG_PACKAGE_luci-proto-ppp=y
-CONFIG_PACKAGE_luci-sgi-cgi=y
-CONFIG_PACKAGE_luci-lib-core=y
-CONFIG_PACKAGE_luci-lib-core_source=y
-CONFIG_PACKAGE_luci-lib-ipkg=y
-CONFIG_PACKAGE_luci-lib-json=y
-CONFIG_PACKAGE_luci-lib-nixio=y
-CONFIG_PACKAGE_luci-lib-nixio_notls=y
-CONFIG_PACKAGE_luci-lib-sys=y
-CONFIG_PACKAGE_luci-lib-web=y
-

iop/configs/target/intel_mips/config

@@ -1,97 +0,0 @@
-# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
-CONFIG_GCC_VERSION="6.3.0"
-CONFIG_TOOLCHAINOPTS=y
-# CONFIG_BINUTILS_USE_VERSION_2_27 is not set
-CONFIG_BINUTILS_USE_VERSION_2_28=y
-# CONFIG_BINUTILS_USE_VERSION_2_29_1 is not set
-# CONFIG_GCC_USE_GRAPHITE is not set
-# CONFIG_GCC_USE_VERSION_5 is not set
-CONFIG_GCC_USE_VERSION_6=y
-# CONFIG_GCC_USE_VERSION_7 is not set
-# CONFIG_LIBC_USE_GLIBC is not set
-CONFIG_LIBC_USE_MUSL=y
-
-
-# CONFIG_PACKAGE_ppp-mod-pppoa is not set
-
-#################### switch related
-CONFIG_PACKAGE_switch_cli_ugw8=y
-
-#################### ppa related
-#CONFIG_PACKAGE_ppacmd=y
-# CONFIG_PACKAGE_kmod-ppa-drv-gre is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-grx500-eth-bond is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-grx500-mpe is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-mpe-ip97 is not set
-CONFIG_PACKAGE_mcast-pa=y
-
-#################### DSL related
-CONFIG_PACKAGE_dsl-cpe-control-vrx=y
-CONFIG_dsl-cpe-mei-vrx_DEVICE_VR11=y
-CONFIG_dsl-cpe-mei-vrx_IRQ_POLLING_ACTIVE=y
-CONFIG_PACKAGE_kmod-dsl-cpe-mei-vrx=y
-CONFIG_PACKAGE_ifxos=y
-CONFIG_PACKAGE_kmod-directconnect-dp=y
-CONFIG_PACKAGE_kmod-vrx518_tc_drv=y
-CONFIG_PACKAGE_vrx518_aca_fw=y
-CONFIG_PACKAGE_vrx518_ppe_fw=y
-CONFIG_dsl-cpe-api-vrx_MODEL_DEBUG=y
-CONFIG_dsl-cpe-control-vrx_DTI=y
-CONFIG_dsl-cpe-control-vrx_MODEL_DEBUG=y
-# yes intel dsl script need this.
-CONFIG_BUSYBOX_CONFIG_USLEEP=y
-#################### DSL related end
-
-#################### WIFI related
-CONFIG_PACKAGE_kmod-lantiq-wlan-wave-support_5_x=y
-CONFIG_PACKAGE_ltq-wlan-wave_5_x=y
-CONFIG_FEATURE_LTQ_WAVE_500_PCIE=y
-# CONFIG_FEATURE_LTQ_WAVE_500 is not set
-CONFIG_FEATURE_LTQ_WAVE_AR10_SUPPORT=y
-# CONFIG_FEATURE_LTQ_WAVE_STA is not set
-# CONFIG_FEATURE_LTQ_WAVE_DEBUG_TFTP_BINS is not set
-# CONFIG_FEATURE_LTQ_WAVE_FGPA_DUMMY_PHY is not set
-CONFIG_FEATURE_LTQ_WAVE_500B=y
-# WifiLife not yet available for Intel
-CONFIG_PACKAGE_juci-wifilife=n
-CONFIG_PACKAGE_wifilife=n
-####################
-
-#################### VoIP related
-CONFIG_PACKAGE_ltq-voice-tapi=y
-CONFIG_PACKAGE_ltq-voice-vmmc-xrx500=y
-CONFIG_PACKAGE_asterisk13=y
-CONFIG_PACKAGE_asterisk13-app-confbridge=y
-CONFIG_PACKAGE_asterisk13-app-playtones=y
-CONFIG_PACKAGE_asterisk13-app-read=y
-CONFIG_PACKAGE_asterisk13-app-record=y
-CONFIG_PACKAGE_asterisk13-app-system=y
-CONFIG_PACKAGE_asterisk13-bridge-builtin-features=y
-CONFIG_PACKAGE_asterisk13-bridge-simple=y
-CONFIG_PACKAGE_asterisk13-bridge-softmix=y
-CONFIG_PACKAGE_asterisk13-cdr=y
-CONFIG_PACKAGE_asterisk13-cdr-csv=y
-CONFIG_PACKAGE_asterisk13-chan-lantiq=y
-CONFIG_PACKAGE_asterisk13-chan-sip=y
-CONFIG_PACKAGE_asterisk13-format-g726=y
-CONFIG_PACKAGE_asterisk13-format-g729=y
-CONFIG_PACKAGE_asterisk13-format-gsm=y
-CONFIG_PACKAGE_asterisk13-format-sln=y
-CONFIG_PACKAGE_asterisk13-func-channel=y
-CONFIG_PACKAGE_asterisk13-func-db=y
-CONFIG_PACKAGE_asterisk13-func-shell=y
-CONFIG_PACKAGE_asterisk13-pbx-spool=y
-CONFIG_PACKAGE_asterisk13-res-musiconhold=y
-CONFIG_PACKAGE_asterisk13-res-rtp-asterisk=y
-CONFIG_PACKAGE_asterisk13-sounds=y
-CONFIG_PACKAGE_voice-client=y
-#################### VoIP related end
-
-# the options below this point is wrong but packages wont compile
-
-# CONFIG_PACKAGE_libcgroup is not set
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-
-# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
-# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
-

iop/configs/target/intel_mips/easy550/config

@@ -1,2 +0,0 @@
-CONFIG_LTQ_VOICE_VMMC_WITH_SLIC100=n
-CONFIG_LTQ_VOICE_VMMC_WITH_SLIC200=y

iop/configs/target/intel_mips/speedport_smart3/config

@@ -1,3 +0,0 @@
-# temporary solution for kernel
-CONFIG_KERNEL_GIT_BRANCH="speedport_smart3"
-CONFIG_KERNEL_GIT_COMMIT="fef58dd6628c4b8b9c921fae473874fcda6361bf"

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -1,15 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -1,7 +0,0 @@
-CONFIG_BCM_I2C=y
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y
-

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -1,5 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -1,15 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -1,3 +0,0 @@
-CONFIG_BCM_I2C=y
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -1,2 +0,0 @@
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -1,5 +0,0 @@
-CONFIG_BCM_I2C=y
-CONFIG_TARGET_NO_DECT=y
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_ENDPOINT_MODULE=y
-

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -1,4 +0,0 @@
-CONFIG_TARGET_NO_DHD=y
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_ramips/config

@@ -1,14 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-# CONFIG_PACKAGE_power-management is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-# CONFIG_PACKAGE_mtd-utils-deubinize is not set
-# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
-# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
-# CONFIG_PACKAGE_mtd-utils-nanddump is not set
-CONFIG_PACKAGE_mtd-utils-nandwrite=y
-CONFIG_PACKAGE_mtk-bndstrg=y
-CONFIG_PACKAGE_igmpproxy=y
-CONFIG_PACKAGE_kmod-nf-nathelper=y
-CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
-# CONFIG_PACKAGE_endptmngr is not set

iop/scripts/feeds_update.sh

@@ -32,13 +32,15 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p targets iopsys-ramips
-    ./scripts/feeds install -p intel_targets intel_mips
+    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
+    for target in $targets
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
     # install all packages
-    ./scripts/feeds install -a 
+    ./scripts/feeds install -a
 
     # remove broken symlinks ( for packages that are no longer in the feed )
     find -L package/feeds -maxdepth 2 -type l -delete
@@ -47,7 +49,7 @@ function feeds_update {
     make defconfig
 
     # record when we last run this script
-    touch tmp/.iop_bootstrap 
+    touch tmp/.iop_bootstrap
 
     # always return true
     exit 0

iop/scripts/genconfig.sh

@@ -1,51 +1,121 @@
 #!/bin/bash
 
 function genconfig {
+	export OPENSDK=0
 	export CLEAN=0
 	export IMPORT=1
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
 	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop/configs"
+	export CONFIGPATH="package/feeds/iopsys/iop"
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
+	#always use the mirror
 	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
-
 	target="bogus"
-	masterconfig=1
+	config_path=""
+	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	intel_mips="target/linux/intel_mips"
+
+	Red='\033[0;31m'          # Red
+	Color_Off='\033[0m'       # Text Reset
+	Yellow='\033[0;33m'       # Yellow
+
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+	mediatekAllowed=0
+	wifilifeAllowed=0
+	defaultConsumerAllowed=0
+	baseURL=""
+
+
+	function find_last {
+	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
+	}
+
+	function is_new {
+	    for opt in $conf_warned
+	    do
+		if [ "$opt" == "$1" ]
+		then
+		    return 1
+		fi
+	    done
+	    # option not found return true
+	    return 0
+	}
+
+	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
+	    local conf_opt
+	    local conf_org
+	    local conf_new
+
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
+	    do
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		if [ -n "${conf_opt}" ]
+		then
+		    conf_org=$(find_last ${conf_opt} .genconfig.config)
+		    conf_new=$(find_last ${conf_opt} .config)
+		    if [ "$conf_org" != "$conf_new" ]
+		    then
+			if is_new $conf_opt
+			then
+			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
+			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
+			    echo "This is a real problem somebody needs to investigate"
+			    echo ""
+			    conf_warned="$conf_warned $conf_opt"
+			fi
+		    else
+			true
+			# for debug to see all options
+			#echo -e "wanted [$conf_org] got [$conf_new]"
+		    fi
+		fi
+		num=$((num+1))
+	    done
+	}
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
-	    local iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
-	    local iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
-	    local iopsys_ramips="ex400 sdx810_ap"
-	    local intel_mips="easy550 easy350 norrland speedport_smart3"
-	    local ramips="mt7621"
+		[ -e $brcm63xx_mips/genconfig ] &&
+			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $intel_mips/genconfig ] &&
+			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
 
-	    if [ "$profile" == "LIST" ]
-	    then
-		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
-		do
-		    echo "$list based boards:"
-		    for b in ${!list}
-		    do
-			echo -e "\t$b"
-		    done
-		done
-		return
+	    if [ "$profile" == "LIST" ]; then
+			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
+				echo "$list based boards:"
+				for b in ${!list}; do
+					echo -e "\t$b"
+				done
+			done
+			return
 	    fi
-	    
-	    
-	    local targets
 
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
+			config_path="$brcm63xx_mips/config"
 		    return
 		fi
 	    done
@@ -53,6 +123,7 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
+			config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -60,50 +131,21 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
+			config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $ramips; do
-		if [ $p == $profile ]; then
-		    target="ramips"
-		    masterconfig=0
-		    return
-		fi
-	    done
-
-	    for p in $intel_mips; do
+	    for p in $iopsys_intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
+			config_path="$intel_mips/config"
 		    return
 		fi
 	    done
 
 	}
 
-	git remote -v | grep -q http || {
-		DEVELOPER=1
-
-		bcmAllowed=0
-		iceAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-		mediatekAllowed=0
-		wifilifeAllowed=0
-
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			linux) mediatekAllowed=1 ;;
-			wifilife) wifilifeAllowed=1 ;;
-			esac
-		done
-	}
-
 	v() {
 		[ "$VERBOSE" -ge 1 ] && echo "$@"
 	}
@@ -112,18 +154,19 @@ function genconfig {
 		echo
 		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
 		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
+		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -p|--profile\tSet profile (if exists) default juci"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
+		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
+		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
+		echo -e "  -h|--help\t\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo -e "  -b|--boards\tList all board types"		
+		echo -e "  -a|--list-all\t\tList all Customers and their board types"
+		echo -e "  -b|--boards\t\tList all board types"
+		echo -e "  -O|--opensdk\t\tUse the iopsysWRT opensdk"
 		echo
-		echo "Example ./iop genconfig vg50 TELIA"
-		echo "(if no customerconfig is chosen the Inteno Config will be used)"
+		echo "Example ./iop genconfig dg200 TELIA"
+		echo "(if no customerconfig is chosen, iopsys config will be used)"
 		echo
 		exit 0
 	}
@@ -183,17 +226,18 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
-			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
+
+		if [[ !  -z  $CUSTREPO  ]]; then
+			if git ls-remote $CUSTREPO -q 2>/dev/null; then
+				if [ ! -d "$CUSTPATH" ]; then
+					git clone "$CUSTREPO" "$CUSTPATH"
+				elif [ $IMPORT -eq 1 ]; then
+					cd $CUSTPATH
+					v "git pull"
+					git pull
+					cd - >/dev/null #go back
+				fi
 			fi
-		else
-			echo "You do not have access to $CUSTREPO"
 		fi
 
 		if [ ! -d "$FILEDIR" ]; then
@@ -239,40 +283,17 @@ function genconfig {
 		fi
 
 		# Generate base config
-		# Used only for iopsys targets, not openwrt targets
 		rm -f .config
-		if [ $masterconfig -eq 1 ]; then
-			v "Config $BOARDTYPE selected"
-			v "cp $CONFIGPATH/config .config"
-			cp $CONFIGPATH/config .config
-		fi
+		v "Config $BOARDTYPE selected"
+		v "cp $CONFIGPATH/config .config"
+		cp $CONFIGPATH/config .config
 
-		# Add target (soc/board specific )
-		if [ -f $CONFIGPATH/target/config ]; then
-		    cat $CONFIGPATH/target/config >> .config
+		if [ -f $config_path/config ]; then
+		    cat $config_path/config >> .config
 		fi
-		if [ -f $CONFIGPATH/target/$target/config ]; then
-		    cat $CONFIGPATH/target/$target/config >> .config
+		if [ -f $config_path/$BOARDTYPE/config ]; then
+		    cat $config_path/$BOARDTYPE/config >> .config
 		fi
-		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
-		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
-		fi
-
-		# Apply profile diff to master config if selected
-		if [ -n "$PROFILE" ]; then
-			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
-				cat $CONFIGPATH/$PROFILE.diff >> .config
-			elif [ "$PROFILE" == "juci" ]; then
-				v "Default profile (juci) is selected."
-			else
-				echo "ERROR: profile $PROFILE does not exist!"
-				exit 1
-			fi
-		else
-			v "No profile selected! Using default."
-		fi
-
-		# Set target and profile
 
 		#special handling for intel_mips which use TARGET_DEVICES
 		if [ "$target" = "intel_mips" ]; then
@@ -336,7 +357,7 @@ function genconfig {
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
-			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
+			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
@@ -345,6 +366,11 @@ function genconfig {
 			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
+		if [ -n "$BRCM_MAX_JOBS" ]
+		then
+		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
+		fi
+
 		# Force regeneration of themes
 		touch package/feeds/juci/juci/Makefile
 
@@ -356,23 +382,19 @@ function genconfig {
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-				
+
+		# Store generated config
+		cp .config .genconfig.config
+
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
-		# Temporary fixup for juci/luci profile
-		if [ "$PROFILE" == "luci" ]; then
-			sed -i '/CONFIG_DEFAULT_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
-		fi
-
-		if [ $masterconfig -eq 1 ]; then
-			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-		fi
+		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
+
+		verify_config
 	}
 
 	####### main #####
@@ -391,12 +413,14 @@ function genconfig {
 		while [ -n "$1" ]; do
 			case "$1" in
 
+			-O|--opensdk) export OPENSDK=1;;
 			-c|--clean) export CLEAN=1;;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
+			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;
@@ -411,7 +435,37 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
+		#Check if you should have public or private access
+		DEVELOPER=1
+
+		if git remote -v | grep -q http; then
+			baseURL="https://dev.iopsys.eu/"
+			DEVELOPER=0
+		else
+			baseURL="git@dev.iopsys.eu:"
+		fi
+
+		if [[ $OPENSDK -eq 0 ]] ; then
+			git ls-remote $"${baseURL}consumer/iopsys.git" -q 2>/dev/null && defaultConsumerAllowed=1
+
+			git ls-remote $"${baseURL}broadcom/bcmcreator.git" -q 2>/dev/null && bcmAllowed=1
+			git ls-remote $"${baseURL}mediatek/linux.git" -q 2>/dev/null && mediatekAllowed=1
+			git ls-remote $"${baseURL}dialog/natalie-dect-12.26.git" -q 2>/dev/null && natalieAllowed=1
+			git ls-remote $"${baseURL}iopsys/endptmngr.git" -q 2>/dev/null && endptAllowed=1
+			git ls-remote $"${baseURL}iopsys/wifilife.git" -q 2>/dev/null && wifilifeAllowed=1
+			git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
+
+			if [[ $defaultConsumerAllowed -eq 1 ]] && [[ $baseURL == *"git@"* ]]
+				then
+					CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+			elif [[ $defaultConsumerAllowed -eq 1 ]] && [[ $baseURL ==  *"https"* ]] 
+				then
+					CUSTREPO="${CUSTREPO:-https://dev.iopsys.eu/consumer/iopsys.git}"
+			else
+					CUSTREPO="${CUSTREPO:-}"
+			fi
+		fi
+		echo "custrepo: $CUSTREPO"
 
 		setup_dirs
 		create_and_copy_files "$@"

iop/scripts/genconfig_min.sh

@@ -0,0 +1,378 @@
+#!/bin/bash
+
+function genconfig_min {
+	export CLEAN=0
+	export SRCTREEOVERR=0
+	export FILEDIR="files/"
+	CURRENT_CONFIG_FILE=".current_config_file"
+	export CONFIGPATH="package/feeds/iopsys/iop"
+	CUSTPATH="customerconfigs"
+	export CUSTCONF="customerconfigs/customers"
+	export VERBOSE=0
+	#always use the mirror
+	export DEVELOPER=0
+	target="bogus"
+	config_path=""
+	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	intel_mips="target/linux/intel_mips"
+
+	Red='\033[0;31m'          # Red
+	Color_Off='\033[0m'       # Text Reset
+	Yellow='\033[0;33m'       # Yellow
+
+	function find_last {
+	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
+	}
+
+	function is_new {
+	    for opt in $conf_warned
+	    do
+		if [ "$opt" == "$1" ]
+		then
+		    return 1
+		fi
+	    done
+	    # option not found return true
+	    return 0
+	}
+
+	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
+	    local conf_opt
+	    local conf_org
+	    local conf_new
+
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
+	    do
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		if [ -n "${conf_opt}" ]
+		then
+		    conf_org=$(find_last ${conf_opt} .genconfig.config)
+		    conf_new=$(find_last ${conf_opt} .config)
+		    if [ "$conf_org" != "$conf_new" ]
+		    then
+			if is_new $conf_opt
+			then
+			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
+			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
+			    echo "This is a real problem somebody needs to investigate"
+			    echo ""
+			    conf_warned="$conf_warned $conf_opt"
+			fi
+		    else
+			true
+			# for debug to see all options
+			#echo -e "wanted [$conf_org] got [$conf_new]"
+		    fi
+		fi
+		num=$((num+1))
+	    done
+	}
+
+	# Takes a board name and returns the target name in global var $target
+	set_target() {
+	    local profile=$1
+
+		[ -e $brcm63xx_mips/genconfig ] &&
+			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $intel_mips/genconfig ] &&
+			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+
+	    if [ "$profile" == "LIST" ]; then
+			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
+				echo "$list based boards:"
+				for b in ${!list}; do
+					echo -e "\t$b"
+				done
+			done
+			return
+	    fi
+
+	    for p in $iopsys_brcm63xx_mips; do
+		if [ $p == $profile ]; then
+		    target="iopsys_brcm63xx_mips"
+			config_path="$brcm63xx_mips/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_brcm63xx_arm; do
+		if [ $p == $profile ]; then
+		    target="iopsys_brcm63xx_arm"
+			config_path="$brcm63xx_arm/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_ramips; do
+		if [ $p == $profile ]; then
+		    target="iopsys_ramips"
+			config_path="$ramips/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_intel_mips; do
+		if [ $p == $profile ]; then
+		    target="intel_mips"
+			config_path="$intel_mips/config"
+		    return
+		fi
+	    done
+
+	}
+
+	v() {
+		[ "$VERBOSE" -ge 1 ] && echo "$@"
+	}
+
+	usage() {
+		echo
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo
+		echo -e "  -v|--verbose\t\tVerbose"
+		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
+		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
+		echo -e "  -h|--help\t\tShow this message"
+		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
+		echo -e "  -a|--list-all\t\tList all Customers and their board types"
+		echo -e "  -b|--boards\t\tList all board types"
+		echo
+		echo "Example ./iop genconfig dg400prime IOPSYS"
+		echo
+		exit 0
+	}
+
+	list_customers()
+	{
+		local ALL="$1"
+		local CUSTOMER="$2"
+		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
+			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common )"
+			if [ "$boards" ]; then
+				echo "$CUSTOMER has following boards:"
+				for board in $boards; do
+					echo -e "\t$board"
+				done
+			else
+				echo "No boards found for $CUSTOMER"
+			fi
+		elif [ "$CUSTOMER" ]; then
+			echo "No customer called $CUSTOMER"
+			exit 1
+		elif [ -d $CUSTCONF ]; then
+			local customers="$(ls -1 $CUSTCONF)"
+			if [ "$customers" -a "$ALL" == 1 ]; then
+				for customer in $customers; do
+					echo $customer
+					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common )"
+					if [ "$boards" ]; then
+						for board in $boards; do
+							echo -e "\t$board"
+						done
+					else
+						echo "has no boards"
+					fi
+				done
+			elif [ "$customers" ]; then
+				echo -e "$customers"
+			else
+				echo "no customers found"
+			fi
+		else
+			echo "No $CUSTCONF folder found"
+		fi
+		exit 0
+	}
+
+
+	generate_config()
+	{
+	DIFFFILE="$1"
+	MASTERFILE="$2"
+	while read p; do
+		v "$p"
+		sed -r -i "$p" $MASTERFILE
+	done < $DIFFFILE
+	}
+
+	setup_dirs()
+	{
+
+		if [ ! -d "$FILEDIR" ]; then
+			mkdir -p $FILEDIR
+		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+			v "rm -rf $FILEDIR*"
+			rm -rf $FILEDIR*
+		fi
+	}
+
+	create_and_copy_files()
+	{
+		local BOARDTYPE=$1
+		shift
+		local CUSTOMERS=$@
+
+		# Validate seleced board and customers
+		set_target $BOARDTYPE
+		if [ $target == "bogus" ]; then
+			echo "Hardware profile does not exist"
+			exit 1
+		elif [ -n "$CUSTOMERS" ]; then
+			for CUSTOMER in $CUSTOMERS; do
+				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+					echo "Customer profile for '$CUSTOMER' does not exist"
+					exit 1
+				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+						echo "Common profile configuration will be used"
+					else
+						exit 1
+					fi
+				fi
+			done
+		fi
+
+		# Generate base config
+		rm -f .config
+		v "Config $BOARDTYPE selected"
+		v "cp $CONFIGPATH/config .config"
+		cp $CONFIGPATH/config .config
+
+		if [ -f $config_path/config ]; then
+		    cat $config_path/config >> .config
+		fi
+		if [ -f $config_path/$BOARDTYPE/config ]; then
+		    cat $config_path/$BOARDTYPE/config >> .config
+		fi
+
+		#special handling for intel_mips which use TARGET_DEVICES
+		if [ "$target" = "intel_mips" ]; then
+			subtarget="xrx500"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
+			device=$(echo $BOARDTYPE | tr a-z A-Z)
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
+		else
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+		fi
+
+		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+
+		# Add customerconfig diff if a customer is selected
+		if [ -n "$CUSTOMERS" ]; then
+			for CUSTOMER in $CUSTOMERS; do
+				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"		CUSTREPO="${CUSTREPO:-}"
+
+					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+				fi
+				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+				fi
+				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+				fi
+				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+				fi
+			done
+		fi
+
+		# Set target version
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+		# Enable Package source tree override if selected
+		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+		# developer mode selected ?
+		echo "CONFIG_DEVEL=y" >>.config
+
+		if [ -n "$BRCM_MAX_JOBS" ]
+		then
+		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
+		fi
+
+		# Force regeneration of kernel Makefile
+		# Needed to disable kmods for iopsys-brcm targets
+		touch package/kernel/linux/Makefile
+
+		# we need to signal to bradcom SDK that we have changed the board id
+		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
+		# so just touch that file.
+		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
+
+		# Store generated config
+		cp .config .genconfig.config
+
+		# Set default values based on selected parameters
+		v "$(make defconfig 2>&1)"
+
+		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+
+		# Clean base-file package to force rebuild when changing profile
+		v "$(make package/base-files/clean 2>&1)"
+
+		verify_config
+	}
+
+	####### main #####
+	if [ ! -e tmp/.iop_bootstrap ]; then
+		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+		echo "Run: iop feeds_update"
+		exit 0
+	fi
+
+	if [ $# -eq 0 ]; then
+		echo Current profile:
+		cat $CURRENT_CONFIG_FILE
+		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
+		exit 0
+	else
+		while [ -n "$1" ]; do
+			case "$1" in
+
+			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
+			-p|--profile) export PROFILE="$2"; shift;;
+			-r|--repo) export CUSTREPO="$2"; shift;;
+			-s|--override) export SRCTREEOVERR=1;;
+			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
+			-h|--help) usage;;
+			-l|--list) list_customers 0 $2;;
+			-a|--list-all)list_customers 1;;
+			-b|--boards)set_target LIST;exit 0;;
+			-*)
+				echo "Invalid option: $1 "
+				echo "Try -h or --help for more information."
+				exit 1
+				;;
+			*) break;;
+			esac
+			shift;
+		done
+
+		setup_dirs
+		create_and_copy_files "$@"
+	fi
+}
+
+register_command "genconfig_min" "Generate configuration for customer with manual board configuration"

iop/scripts/generate_tarballs.sh

@@ -59,30 +59,24 @@ build_endptmngr_consumer() {
 	cd "$curdir"
 }
 
-build_ice_consumer() {
-	# create ice-client open version tar file
-	local iceversion icebasever icerelease icecommith
-	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
-	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
-	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
-	iceversion=$icebasever$icerelease
-	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
-	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
-	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
-	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
-	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
-	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	cd "$curdir"
-}
-
 build_wifilife_consumer() {
+	local target="$1"
 	local ver commit
 	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
 	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
 	[ -n "$ver" -a -n "$commit" ] || return
 	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
-	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
+	if [ "$target" == "iopsys-ramips" ]; then
+		cd ./build_dir/target-mipsel_1004kc_musl/wifilife-$ver/ipkg-*
+	elif [ "$target" == "intel_mips" ]; then
+		cd ./build_dir/target-mips_24kc+nomips16_musl/wifilife-$ver/ipkg-*
+	elif [ "$target" == "iopsys-brcm63xx-arm" ]; then
+		cd ./build_dir/target-arm_xscale_musl_eabi/wifilife-$ver/ipkg-*
+	elif [ "$target" == "iopsys-brcm63xx-mips" ]; then
+		cd ./build_dir/target-mips*/wifilife-$ver/ipkg-*
+	else
+		return
+	fi
 	mkdir -p wifilife-$ver/src
 	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
 	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
@@ -147,7 +141,7 @@ function generate_tarballs {
 	while getopts "t:h" opt; do
 		case $opt in
 			t)
-				stk_target=${OPTARG}
+				sdk_target=${OPTARG}
 				;;
 			h)
 				print_usage
@@ -160,23 +154,23 @@ function generate_tarballs {
 		esac
 	done
 
-	if [ ! -n "$stk_target" ]; then
+	if [ ! -n "$sdk_target" ]; then
 		print_usage
 		exit 1
 	fi
 
-	if [ "$stk_target" == "broadcom" ]; then
+	if [ "$sdk_target" == "broadcom" ]; then
 		build_bcmkernel_consumer
 		build_natalie_consumer
 		build_endptmngr_consumer
-		build_ice_consumer
-		build_wifilife_consumer
-	elif [ "$stk_target" == "mediatek" ]; then
+		build_wifilife_consumer "$target"
+	elif [ "$sdk_target" == "mediatek" ]; then
 		build_mediatek_kernel
-		build_ice_consumer		
-		build_wifilife_consumer
+		build_wifilife_consumer "$target"
+	elif [ "$sdk_target" == "intel" ]; then
+		build_wifilife_consumer "$target"
 	else
-		echo "Invalid target: $stk_target"
+		echo "Invalid target: $sdk_target"
 		print_usage
 		exit 1
 	fi

iop/scripts/install_key.sh

@@ -10,7 +10,7 @@ function install_key {
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
+    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
 
     echo Done
 }

iop/scripts/update_feed_branches.sh

@@ -36,17 +36,17 @@ function update_feed_branches {
 		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo"
 	fi
 
-	ifeeds="$(grep -r feed_inteno feeds.conf  | awk '{print$2}' | cut -d'_' -f3 | tr '\n' ' ')"
+	ifeeds="$(grep -r 'dev.iopsys.eu' feeds.conf | awk '{print$2}' | tr '\n' ' ')"
 
 	for f in $ifeeds; do
-		commith=$(grep feed_inteno_$f feeds.conf | cut -d'^' -f2)
-		cd $ipath/feeds/feed_inteno_$f
+		commith=$(grep $f feeds.conf | cut -d'^' -f2)
+		cd $ipath/feeds/$f
 		git branch -D $release 2>/dev/null
-		echo "feed_inteno_$f: updating release branch $release to commit $commith"
+		echo "$f: updating release branch $release to commit $commith"
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release
-		git push origin $release
+		git push --set-upstream origin $release
 		cd $ipath
 	done
 

iop/scripts/update_package.sh

@@ -496,6 +496,7 @@ check_feeds()
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
+		[ -n "$feed_hash" ] || continue
 		if [ -d feeds/$feed ]; then
 			in_git=$(cd feeds/$feed; git rev-parse HEAD)
 

iopupgrade/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=iopupgrade
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=9b5ed4bc9f7ac5064414cf5feb510ffd95df6ec4
+PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
 

iopupgrade/files/sbin/iopu

@@ -7,6 +7,7 @@ cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 		# eg: rootfs_0 or rootfs_1, the one we want to update
 cmdline=""	# command line settings.
+cmdline_match="" # Headers to match to the image
 
 ###############################################################################
 # file local variables. should not be used in imported functions. Can be used
@@ -20,7 +21,6 @@ upd_ubi_id=""		# num,	UBI volume number for the volume name
 run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
 run_mount_cleanup=0	# set if we should run umount in cleanup
 upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
-upd_cfe=0		# set to 1 if system is using cfe as bootloader.
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
 upd_noreboot=0		# set to 1 if we should not reboot after programming
 upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
@@ -204,9 +204,7 @@ log "Firmware upgrade started"
 if [ $upd_forceimage -eq 0 ]
 then
    board=$(db get hw.board.iopVerBoard)
-   cmdline="$cmdline -b $board"
-else
-    cmdline="$cmdline -q"
+   cmdline_match="board=$board"
 fi
 
 # find out what rootfs volume is active. 
@@ -217,16 +215,19 @@ upd_vol=$(get_flashbank_next)
 upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
 log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
 
+# prepare to match dsl.
+function_call upd_conf_dsl
+
 # prepare to update CFE if it exists
 function_call upd_conf_cfe
 
 # prepare to update kernel if it is stored in MTD/JFFS2 
 function_call upd_conf_kernel
 
-log "now starting writing data to flash with [ iopupgrade $cmdline -u ubi0_$upd_ubi_id ]"
+log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
 run_cleanup=1	# When we start to actually write data there might be some
 		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -u ubi0_$upd_ubi_id
+iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
 
 # in case of any error we abort
 if [ $? -ne 0 ]; then

libjwt/Makefile

@@ -0,0 +1,52 @@
+
+# Copyright (C) 2018 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libjwt
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
+PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libjwt
+  CATEGORY:=Libraries
+  DEPENDS:=+libopenssl +jansson
+  TITLE:= libjwt
+endef
+
+
+#TARGET_CFLAGS += \
+#	-I$(STAGING_DIR)/usr/include
+#	-I$(STAGING_DIR)/usr/include/libnl3
+
+#MAKE_FLAGS += \
+#	CFLAGS="$(TARGET_CFLAGS)" \
+#	LDFLAGS="$(TARGET_LDFLAGS)" \
+#	FPIC="$(FPIC)" \
+#	PLATFORM="$(TARGET_PLATFORM)" \
+#	subdirs="$(subdirs)"
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+define Package/libjwt/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libjwt))

ltq-nand/Makefile

@@ -0,0 +1,33 @@
+#
+# Copyright (C) 2008-2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ltq-nand
+PKG_VERSION:=1.0
+
+PKG_SOURCE:=v$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
+#PKG_SOURCE_PROTO:=git
+#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/releases/download/v$(PKG_VERSION)/
+#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
+#PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
+
+include $(INCLUDE_DIR)/host-build.mk
+
+
+define Host/Compile
+	$(MAKE) -C $(HOST_BUILD_DIR)
+endef
+
+define Host/Install
+	$(CP) \
+		$(HOST_BUILD_DIR)/ltq-nand \
+		$(STAGING_DIR_HOST)/bin/
+endef
+
+$(eval $(call HostBuild))
+

mqtt-ciotc/Makefile

@@ -0,0 +1,37 @@
+#
+# Copyright (C) 2013 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=mqtt-ciotc
+PKG_VERSION:=0.1
+
+PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/mqtt-ciotc
+	CATEGORY:=Utilities
+	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
+	TITLE:=mqtt google iot clinet
+endef
+
+define Package/mqtt-ciotc/description
+	mqtt google iot client
+endef
+
+define Package/mqtt-ciotc/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -0,0 +1,3 @@
+config certs 'certs'
+	option private '/etc/mqtt-ciotc/rsa_private.pem'
+	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -0,0 +1,35 @@
+#!/bin/sh /etc/rc.common
+
+START=96
+STOP=10
+PROG=/sbin/mqtt_ciotc
+
+USE_PROCD=1
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	config_load mqtt_ciotc
+	config_get private certs private
+	config_get root certs root
+
+	[ -n $private ] && procd_append_param command --private-cert $private
+	[ -n $root ] && procd_append_param command --root-cert $root
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service()
+{
+	service_stop ${PROG}
+}
+
+reload_service() {
+#	procd_send_signal wifilife # use SIGHUP
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger "mqtt_ciotc"
+}

natalie-dect/Makefile

@@ -18,7 +18,7 @@ PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=natalie-dect-open
 else
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=git@dev.iopsys.eu:dialog/natalie-dect-12.26
+PKG_SOURCE_URL:=https://dev.iopsys.eu/dialog/natalie-dect-12.26.git
 PKG_SOURCE_PROTO:=git
 endif
 

ndt/Makefile

@@ -0,0 +1,33 @@
+#
+# This is free software, See /COPYRIGHT for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ndt
+PKG_VERSION:=3.6.4
+PKG_RELEASE:=3
+
+PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
+PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ndt
+	CATEGORY:=Utilities
+	DEPENDS:=+libpthread +zlib
+	TITLE:=Network Testing Tool
+endef
+
+define Build/Compile/Default
+	$(MAKE) -C $(PKG_BUILD_DIR)
+endef
+
+define Package/ndt/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(CP) $(PKG_BUILD_DIR)/src/web100clt $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ndt))
+

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=278605190c77695edb0d67b970b691cba0a1e75a
+PKG_SOURCE_VERSION:=6406325e72d7ddd0ff7aaa3a87669519021bdb11
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/config/netmode

@@ -4,6 +4,6 @@ config mode 'setup'
         option curmode 'routed'
 
 config tools 'tools'
-	option wificontrol 1
+	option wificontrol 0
 	option arp_discovery 1
 

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,6 +2,9 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
+automode="$(uci -q get netmode.setup.automode)"
+[ "$automode" == "0" ] && exit
+
 . /lib/functions.sh
 . /lib/functions/network.sh
 . /lib/functions/netmode.sh

netmode/files/etc/init.d/netmode

@@ -12,7 +12,7 @@ start_netmoded() {
 	procd_open_instance
 	procd_set_param command $NETMODED
 
-	procd_append_param command --verbose warning
+	procd_append_param command --verbose warning -i macaddr
 	procd_set_param stdout 1
 	procd_set_param stderr 1
 

netmode/files/etc/netmodes/bridged/DETAILS

@@ -12,7 +12,8 @@
 		"CG300",
 		"CG301",
 		"EX400",
-		"SDX810-AP"
+		"SDX810-AP",
+		"NORRLAND"
 	],
 	"acl" : [
 		"admin",

netmode/files/etc/netmodes/bridged/wireless

@@ -1,6 +1,5 @@
 config wifi-status 'status'
 	option wlan '1'
-	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -8,9 +7,6 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -47,10 +43,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
+	option macfilter 'disable'
+	option wps '1'
 	option wmf_bss_enable '1'
-	option bss_max '32'
+	option maxassoc '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +83,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
+	option macfilter 'disable'
+	option wps '1'
 	option wmf_bss_enable '1'
-	option bss_max '32'
+	option maxassoc '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -9,7 +9,8 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*"
+		"F*",
+		"NORRLAND"
 	],
 	"uplink_band" : 'a',
 	"downlink_band" : 'a b',

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh

@@ -35,3 +35,4 @@ apply_wet_cfg()
 	rm /tmp/netmodecfg 2> /dev/null
 }
 
+apply_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/disable_ubusproxy.sh

@@ -0,0 +1,2 @@
+uci -q set owsd.ubusproxy.enable="0"
+uci -q commit owsd

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh

@@ -35,3 +35,4 @@ save_wet_cfg()
 	config_foreach parse_wet_cfg "wifi-iface"
 }
 
+save_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,6 +1,5 @@
 config wifi-status 'status'
 	option wlan '1'
-	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -8,9 +7,6 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -27,7 +23,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps_pbc	1
+	option wps	1
 
 config wifi-device  rai0
 	option band a
@@ -46,7 +42,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps_pbc	1
+	option wps	1
 
 config wifi-iface
 	option device   rai0

netmode/files/etc/netmodes/routed_brcm/DETAILS

@@ -9,7 +9,8 @@
 	],
 	"excluded_boards" : [
 		"EX4*",
-		"SDX810-AP"
+		"SDX810-AP",
+		"NORRLAND"
 	],
 	"credentials" : 0
 }

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -1,6 +1,5 @@
 config wifi-status 'status'
 	option wlan '1'
-	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -8,9 +7,6 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -47,10 +43,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
+	option macfilter 'disable'
+	option wps '1'
 	option wmf_bss_enable '1'
-	option bss_max '32'
+	option maxassoc '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +83,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
+	option macfilter 'disable'
+	option wps '1'
 	option wmf_bss_enable '1'
-	option bss_max '32'
+	option maxassoc '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/routed_mtk/DETAILS

@@ -9,7 +9,8 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*"
+		"F*",
+		"NORRLAND"
 	],
 	"reboot" : 0,
 	"credentials" : 0

netmode/files/etc/netmodes/routed_mtk/omcproxy

@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -1,6 +1,5 @@
 config wifi-status 'status'
 	option wlan '1'
-	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -8,9 +7,6 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -27,7 +23,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pbc	1
+	option wps	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -47,6 +43,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps_pbc	1
+	option wps	1
 	option ifname	rai0
 

netmode/files/lib/functions/netmode.sh

@@ -1,12 +1,11 @@
 #!/bin/sh
 
-. /etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh
-. /etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh
 . /lib/functions.sh
 . /usr/share/libubox/jshn.sh
 
 NMTMPDIR=/var/netmodes
 OLD_MODE_FILE=/var/netmodes/old_mode
+CONF_BACKUP_DIR=/var/netmodes/backup/
 SWITCHMODELOCK="/tmp/switching_mode"
 MODEDIR=$(uci -q get netmode.setup.dir)
 MTK=0
@@ -122,8 +121,13 @@ run_netmode_scripts() {
 	local mode=$1
 	local when=$2
 	local script
+	local path
+
+	path=$(readlink -f /etc/netmodes/$mode/)
+	[ "${path:0:14}" == "/etc/netmodes/" ] || exit
+
 	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
-		logger -s -p user.info -t $0 "[netmode] Executing $when netmode scripts" >/dev/console
+		logger -s -p user.info -t "netmode" "Executing $when netmode scripts" >/dev/console
 		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
 			sh /etc/netmodes/$mode/scripts/$when/$script
 		done
@@ -181,8 +185,13 @@ switch_netmode() {
 
 	run_netmode_scripts $curmode "pre"
 
-	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-	save_wet_cfg
+	# make backup of current config before switching
+	rm -rf $CONF_BACKUP_DIR
+	mkdir -p $CONF_BACKUP_DIR
+	cp -af /etc/config/* $CONF_BACKUP_DIR
+
+	logger -s -p user.info -t "netmode" "Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
+
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
 			DETAILS|scripts) continue ;;
@@ -190,7 +199,9 @@ switch_netmode() {
 		cp /etc/netmodes/$curmode/$file /etc/config/
 	done
 	sync
-	apply_wet_cfg
+
+	#commit owsd to reload all init.d scripts dependent on its config
+	ubus call uci commit '{"config":"owsd"}'
 
 	local reboot=$(uci -q get netmode.$curmode.reboot)
 
@@ -204,11 +215,10 @@ switch_netmode() {
 	case "$curmode" in
 		repeater*)
 			touch $SWITCHMODELOCK
-			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
+			logger -s -p user.info -t "netmode" "Switching to $curmode mode" > /dev/console
 			ubus call leds set  '{"state" : "allflash"}'
-			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
-			[ -f /etc/init.d/igmpproxy ] && /etc/init.d/igmpproxy stop
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
+			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call network reload
 			wifi reload nodat
 			ubus call router.network reload
@@ -219,6 +229,7 @@ switch_netmode() {
 		;;
 		*)
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
+			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call uci commit '{"config":"network"}'
 		;;
 	esac
@@ -226,6 +237,27 @@ switch_netmode() {
 	run_netmode_scripts $curmode "post"
 }
 
+revert_netmode() {
+	local from="$1"
+	local to="$2"
+	local rready="$3"
+
+	ubus call leds set  '{"state" : "allflash"}'
+	logger -s -p user.info -t "netmode" "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
+	cp -af $CONF_BACKUP_DIR/* /etc/config/
+	sync
+	uci -q set netmode.setup.curmode="$to"
+	uci -q set netmode.setup.repeaterready="$rready"
+	uci commit netmode
+	rm -rf $CONF_BACKUP_DIR
+	rm -rf $OLD_MODE_FILE
+
+	logger -s -p user.info -t "netmode" "Restarting network services" > /dev/console
+	/etc/init.d/network restart
+	ubus call router.network reload
+	ubus call leds set  '{"state" : "normal"}'
+}
+
 wificontrol_takes_over() {
 	local ret
 	[ -f /sbin/wificontrol ] || return
@@ -260,10 +292,10 @@ wait_for_netmode_handler() {
 
 netmode_get_ip_type() {
 	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
+		logger -t $0 "netmode_get_ip_type: ip $1 is private"
 		echo "private"
 	} || {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
+		logger -t $0 "netmode_get_ip_type: ip $1 is public"
 		echo "public"
 	}
 }
@@ -351,7 +383,7 @@ populate_netmodes() {
 	done
 
 	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
+	local keys lang desc exp exclude support
 	for mode in $(ls $MODEDIR); do
 
 			case "$mode" in
@@ -381,12 +413,31 @@ populate_netmodes() {
 				done
 				json_select ..
 				[ $exclude -eq 1 ] && continue
+			elif json_select supported_boards; then
+				support=0
+				_i=1
+				while json_get_var board $_i; do
+					case "$hardware" in
+						$board)
+							support=1
+							break
+						;;
+					esac
+					_i=$((_i+1))
+				done
+				json_select ..
+				[ $support -eq 1 ] || {
+					uci -q delete netmode.$mode
+					continue
+				}
 			fi
 
 			if json_select acl; then
 				_i=1
 				while json_get_var user $_i; do
+					uci del_list netmode.$mode._access_r="$user"
 					uci del_list netmode.$mode._access_w="$user"
+					uci add_list netmode.$mode._access_r="$user"
 					uci add_list netmode.$mode._access_w="$user"
 					_i=$((_i+1))
 				done

netmode/files/usr/libexec/rpcd/repeater

@@ -3,6 +3,10 @@
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
 
+WIFISTA=0
+STACONF="/etc/Wireless/iNIC/iNIC_ap.dat"
+[ -f $STACONF ] && WIFISTA=1
+
 get_if_creds() {
 	local section=$1
 	local network=$2
@@ -84,9 +88,22 @@ duplicate_if_single_radio() {
 	done
 }
 
+get_wifi_iface_cfgstr() {
+	get_cfgno() {
+		config_get ifname "$1" ifname
+		[ "$ifname" == "$2" ] && echo "wireless.$1"
+	}
+	config_load wireless
+	config_foreach get_cfgno wifi-iface $1
+}
+
 case "$1" in
 	list)
-		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
+		if [ $WIFISTA -eq 1 ]; then
+			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {}, "wps_enroll": {}, "wps_stop": {} }'
+		else
+			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
+		fi
 	;;
 	call)
 		case "$2" in
@@ -136,6 +153,88 @@ case "$1" in
 				json_dump
 
 			;;
+			connect)
+				local ssid key enc auth wetif wetcfg wetssid wetkey code
+				read input
+				json_load "$input"
+				json_get_var ssid ssid
+				json_get_var key key
+				code=1
+				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
+				if [ -s /sys/class/net/$wetif/operstate ]; then
+					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
+					wetssid="$(uci -q get $wetcfg.ssid)"
+					wetkey="$(uci -q get $wetcfg.key)"
+					ssid="${ssid:-$wetssid}"
+					key="${key:-$wetkey}"
+					if [ -n "$key" ]; then
+						auth="WPA2PSK"
+						enc="AES"
+					else
+						auth="OPEN"
+						enc="NONE"
+					fi
+					iwpriv $wetif set ApCliEnable=0
+					iwpriv $wetif set ApCliSsid="$ssid"
+					iwpriv $wetif set ApCliAuthMode="$auth"
+					iwpriv $wetif set ApCliEncrypType="$enc"
+					iwpriv $wetif set ApCliWPAPSK="$key"
+					iwpriv $wetif set ApCliEnable=1
+					iwpriv $wetif set ApCliAutoConnect=1
+					code=0
+				fi
+				json_init
+				json_add_int "code" $code
+				json_dump
+			;;
+			forget_network)
+				local wetif wetcfg code
+				code=1
+				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
+				if [ -s /sys/class/net/$wetif/operstate ]; then
+					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
+					uci -q set $wetcfg.ssid=""
+					uci -q set $wetcfg.key=""
+					uci -q commit wireless
+
+					sed -i "s/ApCliSsid=.*/ApCliSsid=/g" $STACONF
+					sed -i "s/ApCliAuthMode=.*/ApCliAuthMode=/g" $STACONF
+					sed -i "s/ApCliEncrypType=.*/ApCliEncrypType=/g" $STACONF
+					sed -i "s/ApCliWPAPSK=.*/ApCliWPAPSK=/g" $STACONF
+
+					ifconfig $wetif down
+					ifconfig $wetif up
+
+					code=0
+				fi
+				json_init
+				json_add_int "code" $code
+				json_dump
+			;;
+			wps_enroll)
+				local wetif
+				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
+				if [ -n "$wetif" ]; then
+					iwpriv $wetif set ApCliEnable=0
+					iwpriv $wetif set WscConfMode=1
+					iwpriv $wetif set WscMode=2
+					iwpriv $wetif set ApCliEnable=1
+					iwpriv $wetif set WscGetConf=1
+				fi
+				json_init
+				json_add_string "ifname" $wetif
+				json_dump
+			;;
+			wps_stop)
+				local wetif
+				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
+				if [ -n "$wetif" ]; then
+					iwpriv $wetif set WscStop=1
+				fi
+				json_init
+				json_add_string "ifname" $wetif
+				json_dump
+			;;
 		esac
 	;;
 esac

obuspa/Makefile

@@ -0,0 +1,52 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=obuspa
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=014d7ec63331b3b745e8af53a4be1b52693e2a6f
+PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/obuspa
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=USP agent
+  DEPENDS:=+libcoap +libopenssl +libcurl +libsqlite3 +libcares +libubox +libubus +libblobmsg-json +uspd
+endef
+
+define Package/obuspa/description
+ OB-USP-AGENT is a system daemon providing a User Services Platform (USP) Agent.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-D_GNU_SOURCE
+
+ifneq ($(CONFIG_USE_MUSL),)
+TARGET_CFLAGS += -DUSE_MUSL
+endif
+
+#define Build/Prepare
+#        $(CP) -rf ./obuspa/* $(PKG_BUILD_DIR)/
+#endef
+
+define Package/obuspa/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -0,0 +1,14 @@
+config controller
+	option endpointid 'self::usp-controller.com'
+
+config mtp
+	option enable 'true'
+	option protocol 'STOMP'
+	option destination 'uspq'
+
+config connection
+	option host 'usp-controller.com'
+	option username 'username'
+	option password 'password'
+	option encryption 'false'
+

obuspa/files/etc/init.d/obuspa

@@ -0,0 +1,105 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+PROG=/usr/sbin/obuspa
+
+CTRL_PATH="Device.LocalAgent.Controller.1."
+MTP_PATH="Device.LocalAgent.MTP.1."
+CONN_PATH="Device.STOMP.Connection.1."
+
+log() {
+	echo "${@}"|logger -t obuspa -p debug
+}
+
+db_set() {
+	log "DBSET param|${1}| value|${2}|"
+	${PROG} -c dbset ${1} ${2}
+}
+
+validate_controller_section()
+{
+	uci_validate_section obuspa controller "${1}" \
+		'endpointid:string:"self:usp-controller.com"'
+}
+
+validate_mtp_section()
+{
+	uci_validate_section obuspa mtp "${1}" \
+		'enable:bool:true' \
+		'protocol:string:"STOMP"' \
+		'destination:string:'
+}
+
+validate_connection_section()
+{
+	uci_validate_section obuspa connection "${1}" \
+		'host:string:"usp-controller.com"' \
+		'username:string:username' \
+		'password:string:password' \
+		'encryption:bool:true'
+}
+
+configure_controller() {
+	local endpointid
+
+	validate_controller_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+	db_set "${CTRL_PATH}EndpointID" ${endpointid}
+}
+
+configure_mtp() {
+	local protocol enable destination
+
+	validate_mtp_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+	db_set "${MTP_PATH}Enable" ${enable}
+	db_set "${MTP_PATH}Protocol" ${protocol}
+	db_set "${MTP_PATH}STOMP.Destination" ${destination}
+}
+
+configure_connection() {
+	local host username password encryption
+
+	validate_connection_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+	db_set "${CONN_PATH}Host" ${host}
+	db_set "${CONN_PATH}Username" ${username}
+	db_set "${CONN_PATH}Password" ${password}
+	db_set "${CONN_PATH}X_ARRIS-COM_EnableEncryption" ${encryption}
+}
+
+db_init() {
+	[ -f /tmp/usp.db ] && rm -f /tmp/usp.db
+
+	config_load obuspa
+	config_foreach configure_controller controller
+	config_foreach configure_mtp mtp
+	config_foreach configure_connection connection
+}
+start_service() {
+	db_init
+
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_append_param command -p -v 4
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_config_trigger "config.change" "obuspa"  /etc/init.d/obuspa restart
+}
+

owsd/Config.in

@@ -1,9 +1,9 @@
 choice
-	prompt "Select Bus"
+	prompt "Select IPC Bus"
 	default OWSD_USE_UBUS
 	depends on PACKAGE_owsd
 	help
-		Select which bus to compile owsd for
+		Select which IPC bus to compile owsd for
 
 config OWSD_USE_DBUS
 	bool "Use DBUS"
@@ -15,3 +15,11 @@ config OWSD_USE_DBUS_UBUS
 	bool "Use UBUS and DBUS"
 
 endchoice
+
+config OWSD_UPROXYD
+	bool "Enable UBUS Proxy Daemon"
+	default y if OWSD_USE_UBUS || OWSD_USE_DBUS_UBUS
+        help
+          Enabling uproxyd automates detection of other
+	  UBUS-X enabled devices in the network
+

owsd/Makefile

@@ -1,30 +1,31 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.1
+PKG_VERSION:=1.1.2
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=541e0b5ff85395799c3b27c513172db2592935bb
+PKG_SOURCE_VERSION:=0417231666ea7da12205c9a9798ecce7da85f881
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
-PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS
+PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS CONFIG_OWSD_UPROXYD
 
 USE_UBUS-y:=-DWSD_HAVE_UBUS=ON
 USE_DBUS-y:=-DWSD_HAVE_DBUS=ON
 USE_BOTH-y:=${USE_UBUS-y} ${USE_DBUS-y}
+USE_UPROXYD-y:=-DOWSD_UPROXYD=ON
 
 CMAKE_OPTIONS:=${USE_UBUS-${CONFIG_OWSD_USE_UBUS}} \
 	${USE_DBUS-${CONFIG_OWSD_USE_DBUS}} \
-	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}}
+	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}} \
+	${USE_UPROXYD-${CONFIG_OWSD_UPROXYD}}
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
@@ -52,14 +53,17 @@ endef
 define Package/owsd/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/owsd $(1)/usr/bin/owsd
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/uproxyd
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/owsd.init $(1)/etc/init.d/owsd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) ./files/owsd.config $(1)/etc/config/owsd
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_BIN) ./files/owsd.hotplug $(1)/etc/hotplug.d/iface/55-owsd
-#	$(INSTALL_DIR) $(1)/etc/uci-defaults
-#	$(INSTALL_BIN) ./files/owsd.uci_default $(1)/etc/uci-defaults/55-owsd-interfaces
+ifeq ($(CONFIG_OWSD_UPROXYD),y)
+	$(CP) ./uproxy-files/* $(1)/
+endif
 endef
 
 define Package/owsd-testdata

owsd/files/owsd.config

@@ -5,8 +5,8 @@ config owsd 'global'
 #	option www_maxage '3600'
 
 # ubusproxy is enbaled if: enable = 1 or peer exists or path exists
-config ubusproxy 'ubusproxy'
-	option enable '0'
+#config ubusproxy 'ubusproxy'
+#	option enable '0'
 #	list peer 'wss://repeater_hostname/'
 #	list peer 'wss://192.168.1.101/'
 #	list object 'router.*'
@@ -30,12 +30,12 @@ config owsd-listen 'lan'
 	option whitelist_interface_as_origin '1'
 	option whitelist_dhcp_domains '1'
 
-config owsd-listen 'lan_8080'
-	option port '8080'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
+#config owsd-listen 'lan_8080'
+#	option port '8080'
+#	option interface 'lan'
+#	option ipv6 'on'
+#	option whitelist_interface_as_origin '1'
+#	option whitelist_dhcp_domains '1'
 
 #config owsd-listen 'lan_https'
 #	option port '443'

owsd/files/owsd.init

@@ -111,6 +111,9 @@ validate_owsd_ubusproxy() {
 		'peer:list(string)' \
 		'object:list(string)' \
 		'prefix:string' \
+		'max_reconnect_time:string' \
+		'client_backoff_timeout:string' \
+		'reconnect_timeout:string' \
 		'peer_key:file' \
 		'peer_cert:file' \
 		'peer_ca:file' \
@@ -245,6 +248,35 @@ parse_owsd_iface() {
 	fi
 }
 
+parser_timeout()
+{
+	local flag data
+	local ret=0
+#data format is  digital with time unit
+#10s-10 seconds 10m-10 minutes 10h-10 hours 10d-10 days
+	if [ -n "$1" ]; then
+		flag=$(echo "$1"| tr -d [0-9] | tr '[A-Z]' '[a-z]')
+		data=$(echo "$1"| tr -cd [0-9])
+		case $flag in
+			s)
+			ret=$((data*1000))
+			;;
+			m)
+			ret=$((data*1000*60))
+			;;
+			h)
+			ret=$((data*1000*60*60))
+			;;
+			d)
+			ret=$((data*1000*60*60*24))
+			;;
+		esac
+		echo "$ret"
+	else
+		echo "0"
+	fi
+}
+
 start_service() {
 	# update rpcd config according to owsd acl
 	handle_owsd_acl
@@ -264,54 +296,68 @@ start_service() {
 		return 1
 	}
 
+	config_get reconn   ubusproxy   max_reconnect_time
+	config_get ctimeout ubusproxy 	client_backoff_timeout
+	config_get rtimeout ubusproxy 	reconnect_timeout
+	[ -n "${ctimeout}" ] && ctimeout=$(parser_timeout $ctimeout)
+	[ -n "${rtimeout}" ] && rtimeout=$(parser_timeout $rtimeout)
+
 	[ -n "${sock}"      ] && procd_append_param command -s"${sock}"
 	[ -n "${www}"       ] && procd_append_param command -w"${www}"
 	[ -n "${redirect}"  ] && procd_append_param command -r"${redirect}"
 	[ -n "${www_maxage}" ] && procd_append_param command -t"${www_maxage}"
+	[ -n "${rtimeout}" ] && procd_append_param command -T"${rtimeout}"
+	#validate_owsd_ubusproxy || {
+	#	echo "Ubusproxy validation failed"
+	#	return 1
+	#}
 
-	validate_owsd_ubusproxy || {
-		echo "Ubusproxy validation failed"
-		return 1
+	validate_owsd_ubusproxy && {
+		if [ "${enable}" -eq 1 ]; then
+			procd_append_param command -U
+
+			[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
+			[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
+			[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
+
+			append_peer () {
+				[ -n "$1"   ] && procd_append_param command -P"$1"
+			}
+
+			append_object () {
+				[ -n "$1"   ] && procd_append_param command -U"$1"
+			}
+
+			config_list_foreach "ubusproxy" "peer" append_peer
+			config_list_foreach "ubusproxy" "object" append_object
+
+			[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
+		fi
 	}
 
-	if [ "${enable}" -eq 1 ]; then
-		procd_append_param command -U
-
-		[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
-		[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
-		[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
-
-		append_peer () {
-			[ -n "$1"   ] && procd_append_param command -P"$1"
-		}
-
-		append_object () {
-			[ -n "$1"   ] && procd_append_param command -U"$1"
-		}
-
-		config_list_foreach "ubusproxy" "peer" append_peer
-		config_list_foreach "ubusproxy" "object" append_object
-
-		[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
-	fi
-
 	config_foreach parse_owsd_iface "owsd-listen"
 
 #	procd_set_param stderr 1
 	procd_set_param respawn
 
 	procd_close_instance
-	# Start uproxyd
-	procd_open_instance
-	procd_set_param command $UPROXYD
-	procd_set_param respawn
-	procd_close_instance
+
+	if [ "${enable}" -eq 1 ]; then
+		# Start uproxyd
+		procd_open_instance
+		procd_set_param command $UPROXYD
+		[ -n "${reconn}" ] &&  procd_append_param command -r "${reconn}"
+		[ -n "${ctimeout}" ] && procd_append_param command -t "${ctimeout}"
+		procd_set_param respawn
+		procd_close_instance
+	fi
+
 }
 
-stop_service()
-{
-	service_stop ${PROG}
-}
+#stop_service()
+#{
+#	service_stop ${PROG}
+#}
 
 reload_service() {
         stop

owsd/files/owsd.uci_default

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-MGMT_INTERFACES=""
-OWSD_INTERFACES=""
-NOT_DEFAULT=0
-
-mgmt_interfaces() {
-	local interface=$1
-	[ "$interface" == "loopback" ] && return
-	[ "$interface" == "lan" ] && return
-	[ "$interface" == "wan" ] && return
-	[ "$interface" == "wan6" ] && return
-
-	local type proto
-	config_get type $interface type
-	config_get proto $interface proto "none"
-	[ "$type" == "bridge" -a "$proto" == "none" ] && return
-
-	local is_lan
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] && return
-
-	local ifname
-	config_get ifname $interface ifname
-	[ "${ifname:0:1}" == "@" ] && return
-
-	MGMT_INTERFACES="$MGMT_INTERFACES $interface"
-}
-
-owsd_interfaces() {
-	local config=$1
-	local interface
-	config_get interface $config interface
-	[ "$interface" == "loopback" ] && return
-	[ "$interface" == "lan" ] && return
-	[ "$interface" == "wan" ] && return
-	[ "$interface" == "wan6" ] && return
-
-	OWSD_INTERFACES="$OWSD_INTERFACES $interface"	
-
-	NOT_DEFAULT=1
-}
-
-not_owsd() {
-	local interface=$1
-	local there=0
-	for owsd in $OWSD_INTERFACES; do
-		if [ "$interface" == "$owsd" ]; then
-			there=1
-			break
-		fi
-	done
-	return $there
-}
-
-config_load network
-config_foreach mgmt_interfaces interface
-
-config_load owsd
-config_foreach owsd_interfaces owsd-listen
-
-if [ $NOT_DEFAULT -eq 0 ]; then
-	for mgmt in $MGMT_INTERFACES; do
-		if $(not_owsd $mgmt); then
-			uci -q set owsd.$mgmt=owsd-listen
-			uci -q set owsd.$mgmt.port=80
-			uci -q set owsd.$mgmt.interface="$mgmt"
-			uci -q set owsd.$mgmt.ipv6="on"
-			uci -q set owsd.$mgmt.whitelist_interface_as_origin="1"
-			uci -q set owsd.$mgmt.origin="*"
-
-			uci -q set owsd.$mgmt"_8080"=owsd-listen
-			uci -q set owsd.$mgmt"_8080".port=8080
-			uci -q set owsd.$mgmt"_8080".interface="$mgmt"
-			uci -q set owsd.$mgmt"_8080".ipv6="on"
-			uci -q set owsd.$mgmt"_8080".whitelist_interface_as_origin="1"
-			uci -q set owsd.$mgmt"_8080".origin="*"
-
-			uci commit owsd
-		fi
-	done
-fi
-
-exit 0
-

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.crt

@@ -0,0 +1,19 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.key

@@ -0,0 +1,27 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.srl

@@ -0,0 +1 @@
+514CD4028F0A688DAD8236D20F352623455A4D74

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.crt

@@ -0,0 +1,18 @@
+-----BEGIN CERTIFICATE-----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=
+-----END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.csr

@@ -0,0 +1,16 @@
+-----BEGIN CERTIFICATE REQUEST-----
+MIICkzCCAXsCAQAwTjELMAkGA1UEBhMCU0UxEjAQBgNVBAgMCVN0b2NraG9sbTEV
+MBMGA1UECgwMaW9wc3lzLCBJbmMuMRQwEgYDVQQDDAtVQlVTLVggRGVtbzCCASIw
+DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAOiycDPtw0pQJZn36oWzw+lXUnWj
+4Sroe/cFzlx42s/FwSwTa8NZB2XtBdT0l777EgtLF++WMchQ7sPwA5wfTc07c3QX
+UfgqGZghGNMqiBAvzL9ggYWTMvhtlfBdG2/NfExg211fgtt2LJwC0ZOJJYnfMG1K
+E8Y8WqBHgmliZ/dVpXL9/vi1F1QvzqudU1pTk4gEwcYsvHAx/ZnDcw8pI2PUBNw2
+h6Aq8y8el3sUTajmUOAWRRXdvxCpwAVOuYtfHqZhimj0WjUoesDpKJQ/QpD+WRDb
+zJ+S/OY3gmkm0umibOxyf2eYl9sjmDcZ7NIYYUcMDJb9jZz5U8030L2f82ECAwEA
+AaAAMA0GCSqGSIb3DQEBCwUAA4IBAQDWLgiuSq41EX4J5v5RH2gE3Ywr1FdzPMMe
+SCJxYL3JOcIvDl0aNyx2bAd9Gc6Zj8uRXT8gDsB3cEgAoHdGjiZB0uoNV/Auz6kS
+mYNnmpcZfAw775cBQpYBZvg2CRFqsv8mD4/OhBmoRjMpoosLkAYPuRmE58U/Ah+6
+9MJIzVca6dn7iLMLVWndkCoD9OUwBZNHU+SGTkn0IKUGyMUTmduADPBGbB7mYg6j
+DQsHiR1v7/ngb3uaQoVS8QA+XYmTUa1UZ+/83cmzjvf17rG10KwrJZh0lQNVUt5d
+gvH8aUvQq92xcXYQlhLfVFkqxmrLZNR0rIEeUVwYvVawPK8ZR+UK
+-----END CERTIFICATE REQUEST-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.key

@@ -0,0 +1,27 @@
+-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/uci-defaults/60-owsd-ubusproxy

@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# do not create ubusproxy section if it exists already
+[ "$(uci -q get owsd.ubusproxy)" == "ubusproxy" ] && exit 0
+
+uci set owsd.ubusproxy="ubusproxy"
+uci set owsd.ubusproxy.enable="1"
+uci set owsd.ubusproxy.peer_key="/etc/ubusx/ubusx_demo_only.key"
+uci set owsd.ubusproxy.peer_cert="/etc/ubusx/ubusx_demo_only.crt"
+uci set owsd.ubusproxy.peer_ca="/etc/ubusx/ubusxDemoCA.crt"
+uci commit owsd
+
+# do not create wan_https section if it exists already
+[ "$(uci -q get owsd.wan_https)" == "owsd-listen" ] && exit 0
+
+# do not create wan_https section if wan interface doesn't exist
+[ "$(uci -q get network.wan)" == "interface" ] || exit 0
+
+uci set owsd.wan_https="owsd-listen"
+uci set owsd.wan_https.port="443"
+uci set owsd.wan_https.interface="wan"
+uci set owsd.wan_https.key="/etc/ubusx/ubusx_demo_only.key"
+uci set owsd.wan_https.cert="/etc/ubusx/ubusx_demo_only.crt"
+uci set owsd.wan_https.ca="/etc/ubusx/ubusxDemoCA.crt"
+uci set owsd.wan_https.whitelist_interface_as_origin="1"
+uci del_list owsd.wan_https.origin="*"
+uci add_list owsd.wan_https.origin="*"
+uci commit owsd
+