sysmngr: run reset_reason if present

(cherry picked from commit 5b5a9bb231)

Co-authored-by: Vivek Kumar Dutta <vivek.dutta@iopsys.eu>

bbfdm/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bbfdm
-PKG_VERSION:=1.16.6.2
+PKG_VERSION:=1.18.12
 
 USE_LOCAL:=0
 ifneq ($(USE_LOCAL),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=aa480554461c82e6f6f44ee6c23108d3e44fce21
+PKG_SOURCE_VERSION:=adfdb54d625b952c533670f093dae008782ff56a
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -55,7 +55,7 @@ define Package/dm-service
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Datamodel ubus backend to expose micro-service tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr +libeasy
 endef
 
 define Package/bbf_configmngr
@@ -183,6 +183,7 @@ define Package/bbf_configmngr/install
 
 	$(INSTALL_BIN) ./files/etc/init.d/bbf_configd $(1)/etc/init.d/bbf_configd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_config_notify.sh $(1)/usr/share/bbfdm/scripts/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_default_reload.sh $(1)/etc/bbfdm/
 	$(INSTALL_DATA) ./files/etc/bbfdm/critical_services.json $(1)/etc/bbfdm/
 endef
 

bbfdm/files/etc/bbfdm/critical_services.json

@@ -1,23 +1,51 @@
 {
 	"usp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"time",
-			"wireless",
-			"ieee1905",
-			"mapcontroller",
-			"mosquitto",
-			"nginx",
-			"netmode"
+			"/etc/config/firewall",
+			"/etc/bbfdm/dmmap/dmmap_firewall",
+			"/etc/config/network",
+			"/etc/bbfdm/dmmap/IP",
+			"/etc/bbfdm/dmmap/Ethernet",
+			"/etc/bbfdm/dmmap/GRE",
+			"/etc/bbfdm/dmmap/IPv6rd",
+			"/etc/bbfdm/dmmap/PPP",
+			"/etc/bbfdm/dmmap/Routing",
+			"/etc/config/dhcp",
+			"/etc/bbfdm/dmmap/dmmap_dhcp",
+			"/etc/bbfdm/dmmap/dmmap_dhcp_client",
+			"/etc/bbfdm/dmmap/dmmap_dhcp_relay",
+			"/etc/bbfdm/dmmap/dmmap_dhcpv6",
+			"/etc/config/time",
+			"/etc/bbfdm/dmmap/dmmap_time",
+			"/etc/config/mapcontroller",
+			"/etc/config/wireless",
+			"/etc/bbfdm/dmmap/WiFi",
+			"/etc/config/ieee1905",
+			"/etc/config/mosquitto",
+			"/etc/config/nginx",
+			"/etc/config/netmode",
+			"/etc/bbfdm/dmmap/dmmap_netmode"
 	],
 	"cwmp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"mapcontroller",
-			"wireless",
-			"time",
-			"netmode"
+			"/etc/config/firewall",
+			"/etc/bbfdm/dmmap/dmmap_firewall",
+			"/etc/config/network",
+			"/etc/bbfdm/dmmap/IP",
+			"/etc/bbfdm/dmmap/Ethernet",
+			"/etc/bbfdm/dmmap/GRE",
+			"/etc/bbfdm/dmmap/IPv6rd",
+			"/etc/bbfdm/dmmap/PPP",
+			"/etc/bbfdm/dmmap/Routing",
+			"/etc/config/dhcp",
+			"/etc/bbfdm/dmmap/dmmap_dhcp",
+			"/etc/bbfdm/dmmap/dmmap_dhcp_client",
+			"/etc/bbfdm/dmmap/dmmap_dhcp_relay",
+			"/etc/bbfdm/dmmap/dmmap_dhcpv6",
+			"/etc/config/mapcontroller",
+			"/etc/config/wireless",
+			"/etc/bbfdm/dmmap/WiFi",
+			"/etc/config/time",
+			"/etc/bbfdm/dmmap/dmmap_time",
+			"/etc/config/netmode",
+			"/etc/bbfdm/dmmap/dmmap_netmode"
 	]
 }

bbfdm/files/etc/init.d/bbf_configd

@@ -10,19 +10,10 @@ log() {
 	echo "${@}"|logger -t bbf.config -p info
 }
 
-create_needed_directories()
-{
-	mkdir -p /tmp/bbfdm/.cwmp
-	mkdir -p /tmp/bbfdm/.usp
-	mkdir -p /tmp/bbfdm/.bbfdm
-}
-
 start_service()
 {
 	local log_level
 
-	create_needed_directories
-
 	config_load bbfdm
 	config_get log_level "reload_handler" log_level 2
 
@@ -36,6 +27,6 @@ start_service()
 service_triggers() {
 	for config_file in /etc/config/*; do
 		config_name=$(basename "$config_file")
-		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh
+		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh "$config_name"
 	done
 }

bridgemngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bridgemngr
-PKG_VERSION:=1.0.18.2
+PKG_VERSION:=1.1.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
-PKG_SOURCE_VERSION:=71ed529be038392071b0399bcfe9d46e89d3cb46
+PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr.git
+PKG_SOURCE_VERSION:=e5e0d9adfc919c25d88a867d42a9c500cb09f834
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

bulkdata/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.20
+PKG_VERSION:=2.1.23
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=a5e57962938ca143ede65d92be90b6e9fce66e15
+PKG_SOURCE_VERSION:=f54550f2d587a701c0a8d5cac4a0910a99ce92cf
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

decollector/Config.in

@@ -4,4 +4,16 @@ config DECOLLECTOR_EASYMESH_VERSION
 	int "Support Easymesh version"
 	default 6
 
+config DECOLLECTOR_BUILD_TR181_PLUGIN
+	bool "Build TR-181 mapping module (responsible for Device.WiFi.DataElements.)"
+	default y
+
+config DECOLLECTOR_VENDOR_EXTENSIONS
+	bool "Iopsys vendor extensions for Device.WiFi.DataElements."
+	default y
+
+config DECOLLECTOR_VENDOR_PREFIX
+	string "Package specific datamodel Vendor Prefix for TR181 extensions"
+	default ""
+
 endmenu

decollector/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=decollector
-PKG_VERSION:=6.2.1.8
+PKG_VERSION:=6.2.3.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b7e294d7c610adfd80cf40a0628c189695dc5156
+PKG_SOURCE_VERSION:=2f618a85b4d9dab443319ee355355c526f6429c9
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -24,6 +24,7 @@ PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 
 define Package/decollector
   SECTION:=utils
@@ -66,6 +67,18 @@ MAKE_PATH:=src
 
 TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
 
+ifeq ($(CONFIG_DECOLLECTOR_BUILD_TR181_PLUGIN),y)
+MAKE_FLAGS += DECOLLECTOR_BUILD_TR181_PLUGIN=y
+ifeq ($(CONFIG_DECOLLECTOR_VENDOR_EXTENSIONS),y)
+TARGET_CFLAGS += -DDECOLLECTOR_VENDOR_EXTENSIONS
+ifeq ($(CONFIG_DECOLLECTOR_VENDOR_PREFIX),"")
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
+else
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_DECOLLECTOR_VENDOR_PREFIX)\\\"
+endif
+endif
+endif
+
 EXECS := \
 	$(if $(CONFIG_PACKAGE_decollector),decollector)
 
@@ -76,6 +89,7 @@ define Package/decollector/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
+	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
 endef
 
 $(eval $(call BuildPackage,decollector))

decollector/bbfdm_service.json

@@ -0,0 +1,26 @@
+{
+  "daemon": {
+    "enable": "1",
+    "service_name": "decollector",
+    "unified_daemon": true,
+    "services": [
+      {
+        "parent_dm": "Device.WiFi.",
+        "object": "DataElements"
+      }
+    ],
+    "config": {
+      "loglevel": "3"
+    },
+    "apply_handler": {
+      "uci": [
+        {
+          "file": [
+            "mapcontroller"
+          ],
+          "external_handler": "/etc/wifidmd/bbf_config_reload.sh"
+        }
+      ]
+    }
+  }
+}

dectmngr/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.7.10
+PKG_VERSION:=3.7.12
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1f851980a6ba616df54f79930225f8bcd563b711
+PKG_SOURCE_VERSION:=a62611a36fa85f9fba1b8ec946397dc725c57630
 PKG_MIRROR_HASH:=skip
 endif
 

dhcpmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dhcpmngr
-PKG_VERSION:=1.0.6
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dhcpmngr.git
-PKG_SOURCE_VERSION:=986f66608959f4f589009d580b046e250d8c620d
+PKG_SOURCE_VERSION:=5787de10680719d0c4b72e1ffcfffa895d4c0571
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

dnsmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.18
+PKG_VERSION:=1.0.19
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=80fa147e6f1f0d9c1a62a62a693ff3adaef45363
+PKG_SOURCE_VERSION:=205938aa1f686d5b43460e4a17f3900ed82bd29f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

ethmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=3.0.8
+PKG_VERSION:=3.1.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=c73e5b15718ca40b2740bbe6151dfbb2bcca16df
+PKG_SOURCE_VERSION:=7bc8297e1a74adb522f7635bab4f93a1a2620216
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

fdtextract/Makefile

@@ -10,19 +10,14 @@ PKG_NAME:=fdtextract
 PKG_RELEASE:=1
 PKG_VERSION:=1.0
 
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/system/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=7917dbcb29724476cd46164eec29848df1e5fb67
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_BUILD_PARALLEL:=1
 
@@ -40,9 +35,7 @@ endef
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

firewallmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=firewallmngr
-PKG_VERSION:=1.0.9
+PKG_VERSION:=1.0.12
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/firewallmngr.git
-PKG_SOURCE_VERSION:=77ad8425b73a3ac63f6160dc217635394ac87907
+PKG_SOURCE_VERSION:=30319c67fb4db285a2bcd272b1c10bc040eecf19
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

gateway-info/files/etc/uci-defaults/86-set-gateway-device-info

@@ -110,7 +110,7 @@ configure_send_op125() {
 
 
 	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
+		[ -n "${sendopt}" ] && new_send_opt="$sendopt $opt125" || new_send_opt="$opt125"
 		uci -q set network."${intf}".sendopts="$new_send_opt"
 	else
 		new_send_opt="$sendopt$opt125"
@@ -228,7 +228,7 @@ enable_dhcp_option125() {
 
 	if [ "${proto}" = "dhcp" ]; then
 		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
+			[ -n "${reqopts}" ] && newreqopts="$reqopts 125" || newreqopts="125"
 			uci -q set network."${wan}".reqopts="$newreqopts"
 		fi
 

gateway-info/files/etc/udhcpc.user.d/udhcpc_gateway_info.user

@@ -40,22 +40,22 @@ get_vivsoi() {
 
 	#hex-string 2 character=1 Byte
 	# length in hex string will be twice of actual Byte length
-	[ "$len" -gt "8" ] || return
+	[ "${len}" -gt 8 ] || return
 
 	data="${opt125}"
 	rem_len="${len}"
-	while [ $rem_len -gt 0 ]; do
+	while [ "${rem_len}" -gt 0 ]; do
 		ent_id=${data:0:8}
 		ent_id=$(printf "%d\n" "0x$ent_id")
 
-		if [ $ent_id -ne  3561 ]; then
+		if [ "${ent_id}" -ne  3561 ]; then
 			len_val=${data:8:2}
 			data_len=$(printf "%d\n" "0x$len_val")
 			# add 4 byte for ent_id and 1 byte for len
 			data_len=$(( data_len * 2 + 10 ))
 			# move ahead data to next enterprise id
 			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - $data_len ))
+			rem_len=$(( rem_len - data_len ))
 			continue
 		fi
 
@@ -66,7 +66,7 @@ get_vivsoi() {
 		data_len=$(( data_len * 2 + 10 ))
 
 		opt_len=$(printf "%d\n" "0x$len_val")
-		[ $opt_len -eq 0 ] && return
+		[ "${opt_len}" -eq 0 ] && return
 
 		# populate the option data of enterprise id
 		sub_data_len=$(( opt_len * 2))
@@ -74,7 +74,7 @@ get_vivsoi() {
 		sub_data=${data:10:"${sub_data_len}"}
 
 		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
+		while [ "${sub_data_len}" -gt 0 ]; do
 			# get the suboption id
 			sub_opt_id=${sub_data:0:2}
 			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
@@ -85,20 +85,20 @@ get_vivsoi() {
 			sub_opt_len=$(( sub_opt_len * 2 ))
 
 			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:${sub_opt_len}}
+			sub_opt_val=${sub_data:4:"${sub_opt_len}"}
 
 			# assign the value found in sub option
 			case "${sub_opt_id}" in
 				"4")
-				OUI=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				OUI=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 				"5")
-				SERIAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				SERIAL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 				"6")
-				CLASS=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				CLASS=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				GW_DISCOVERED=1
 				;;
 			esac
@@ -110,7 +110,7 @@ get_vivsoi() {
 			sub_data_len=$((sub_data_len - sub_opt_end))
 
 			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
+			sub_data=${sub_data:"${sub_opt_end}":"${sub_data_len}"}
 		done
 
 		# move ahead data to next enterprise id
@@ -131,15 +131,13 @@ send_host_query() {
 		sleep 5
 
 		json_load "$(ubus call umdns browse)"
-		json_select discovered_services
-		if [ "${?}" -ne 0 ]; then
+		if ! json_select discovered_services; then
 			json_cleanup
 			loop=$(( loop - 1 ))
 			continue
 		fi
 
-		json_select _usp-agt-mqtt._tcp
-		if [ "${?}" -ne 0 ]; then
+		if ! json_select _usp-agt-mqtt._tcp; then
 			json_cleanup
 			loop=$(( loop - 1 ))
 			continue
@@ -156,7 +154,7 @@ send_host_query() {
 
 	json_get_keys keys
 	for key in $keys; do
-		json_select $key
+		json_select "${key}"
 		json_get_var _host host ""
 
 		if [ -z "${_host}" ] || [[ "${sent_host}" =~ " ${_host}" ]]; then
@@ -166,9 +164,10 @@ send_host_query() {
 
 		sent_host="${sent_host} ${_host}"
 		cmd="ubus call umdns query '{\"question\":\"$_host\",\"interface\":\"$intf\"}'"
-		eval $cmd
+		sh -c "${cmd}"
 		resp=0
 		json_select ..
+		sleep 2 # umdns query sometime takes time to resolve so adding some sleep
 	done
 
 	json_cleanup
@@ -185,32 +184,29 @@ get_usp_agent_id() {
 	fi
 
 	json_load "$(ubus call umdns browse)"
-	json_select discovered_services
-	if [ "${?}" -ne 0 ]; then
+	if ! json_select discovered_services; then
 		json_cleanup
-		echo ${ID}
+		echo "${ID}"
 		return 0
 	fi
 
-	json_select _usp-agt-mqtt._tcp
-	if [ "${?}" -ne 0 ]; then
+	if ! json_select _usp-agt-mqtt._tcp; then
 		json_cleanup
-		echo ${ID}
+		echo "${ID}"
 		return 0
 	fi
 
 	json_get_keys keys
 	for key in $keys; do
-		json_select $key
-		json_select $family
-		if [ "${?}" -ne 0 ]; then
+		json_select "${key}"
+		if ! json_select "${family}"; then
 			json_select ..
 			continue
 		fi
 
 		json_get_keys ips
 		for ip in $ips; do
-			json_get_var ip_val $ip
+			json_get_var ip_val "${ip}"
 			if [ "${ip_val}" != "${dhcp_ip}" ]; then
 				continue
 			fi
@@ -219,8 +215,8 @@ get_usp_agent_id() {
 			json_select txt
 			json_get_keys txts
 			for _txt in $txts; do
-				json_get_var text_val $_txt
-				if [[ "${text_val:0:3}" == "ID=" ]]; then
+				json_get_var text_val "${_txt}"
+				if [[ "${text_val:0:3}" = "ID=" ]]; then
 					ID="${text_val:3}"
 					break
 				fi
@@ -238,16 +234,16 @@ get_usp_agent_id() {
 	done
 
 	json_cleanup
-	echo ${ID}
+	echo "${ID}"
 }
 
 get_mac_address() {
 	ip="${1}"
 	device="${2}"
 
-	mac="$(cat /proc/net/arp | grep $ip | awk '{print $4}')"
+	mac=$(grep "${ip}" /proc/net/arp | awk '{print $4}')
 	if [ -z "${mac}" ]; then
-		arp_resp="$(arping -b -f -c 5 -I $device $ip | grep 'Unicast reply from' | awk '{print $5}')"
+		arp_resp=$(arping -b -f -c 5 -I "${device}" "${ip}" | grep 'Unicast reply from' | awk '{print $5}')
 		if [ -n "${arp_resp}" ]; then
 			mac=${arp_resp:1:-1}
 		fi
@@ -260,7 +256,7 @@ send_unknown_gw_event() {
 	mac="${1}"
 
 	cmd="ubus -t 5 send gateway-info.gateway.unknown '{\"hwaddr\":\"$mac\"}'"
-	eval $cmd
+	sh -c "${cmd}"
 }
 
 send_cwmp_gw_event() {
@@ -269,14 +265,14 @@ send_cwmp_gw_event() {
 	serial="${3}"
 
 	cmd="ubus -t 5 send gateway-info.gateway.cwmp '{\"oui\":\"$oui\",\"class\":\"$class\",\"serial\":\"$serial\"}'"
-	eval $cmd
+	sh -c "${cmd}"
 }
 
 send_usp_gw_event() {
 	endpoint="${1}"
 
 	cmd="ubus -t 5 send gateway-info.gateway.usp '{\"endpoint\":\"$endpoint\"}'"
-	eval $cmd
+	sh -c "${cmd}"
 }
 
 config_load gateway
@@ -287,13 +283,13 @@ if [ "${enable}" -eq 0 ]; then
 	return 0
 fi
 
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
-	if [ "${1}" == "deconfig" ]; then
+if [ "${wan_intf}" = "${INTERFACE}" ]; then
+	if [ "${1}" = "deconfig" ]; then
 		rm -rf /var/state/gwinfo
 		return 0
 	fi
 
-	json_load "$(ifstatus ${INTERFACE})"
+	json_load "$(ifstatus "${INTERFACE}")"
 	json_get_var dev_name device ""
 	json_select data
 	json_get_var dhcp_ip dhcpserver ""
@@ -303,7 +299,7 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 		return 0
 	fi
 
-	MAC="$(get_mac_address $dhcp_ip $dev_name)"
+	MAC=$(get_mac_address "${dhcp_ip}" "${dev_name}")
 
 	mkdir -p /var/state
 	touch /var/state/gwinfo
@@ -326,8 +322,8 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 		return 0
 	fi
 
-	len=$(printf "$opt125"|wc -c)
-	get_vivsoi "$opt125" "$len"
+	len=$(echo -n "${opt125}" | wc -c)
+	get_vivsoi "${opt125}" "${len}"
 
 	if [ "${GW_DISCOVERED}" -eq 0 ]; then
 		send_unknown_gw_event "${MAC}"
@@ -341,19 +337,18 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 	uci -q -c /var/state commit gwinfo
 
 	# Check for USP parameters
-	ubus -t 15 wait_for umdns
-	if [ "${?}" -ne 0 ]; then
+	if ! ubus -t 15 wait_for umdns; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0
 	fi
 
-	resp=$(send_host_query $dev_name)
+	resp=$(send_host_query "${dev_name}")
 	if [ "${resp}" -ne 0 ]; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0
 	fi
 
-	ID="$(get_usp_agent_id $dhcp_ip)"
+	ID=$(get_usp_agent_id "${dhcp_ip}")
 	if [ -z "${ID}" ]; then
 		send_cwmp_gw_event "${OUI}" "${CLASS}" "${SERIAL}"
 		return 0

hostmngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostmngr
-PKG_VERSION:=1.3.3
+PKG_VERSION:=1.4.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=fee5bd0067fc1f30498bc2b81e893d170796b459
+PKG_SOURCE_VERSION:=ac50f621e19f74b7af4e4b8c1e810503507cc3dd
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

icwmp/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.9.9.3
+PKG_VERSION:=9.10.10
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=55a64d756afd6249b8bb4cccf2cdaa7e1aa05f91
+PKG_SOURCE_VERSION:=63251b6c9789b1428604af0a5c1d23d32d14a8b8
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -84,6 +84,7 @@ define Package/icwmp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) ./files/etc/uci-defaults/50-cwmp-align-keep-config $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/95-set-random-inform-time $(1)/etc/uci-defaults/

icwmp/files/etc/config/cwmp

@@ -31,7 +31,6 @@ config cpe 'cpe'
 	option bind_retries '5'
 	option userid '' #$OUI-$SER
 	option passwd ''
-	option port '7547'
 	option provisioning_code ''
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
@@ -43,7 +42,9 @@ config cpe 'cpe'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
 	option active_notif_throttle '0'
-	option fw_upgrade_keep_settings '1'
+	#option KeepConfig '1'
+	#option KeepOpConf '1'
+	#option ConfigScope 'UserOnly'
 	option clock_sync_timeout '128'
 	option disable_datatype_check '0'
 	#list allowed_cr_ip '10.5.1.0/24'

icwmp/files/etc/icwmpd/firewall.cwmp

@@ -133,9 +133,56 @@ add_firewall_rule() {
 	fi
 }
 
+remove_port_protection() {
+	local enabled chain rule rule_num
+
+	config_get enabled "${1}" "${2}"
+
+	if [ "${enabled}" -eq 1 ]; then
+		config_get zonename "$1" name
+		[ -n "$zonename" ] || return 0
+
+		chain='prerouting_'$zonename'_rule'
+
+		while rule=$(iptables -w -t nat -nL "$chain" --line-numbers | grep -m 1 -w CWMP_Port_protection); do
+			rule_num=${rule%%[$' \t']*}
+			iptables -w -t nat -D "$chain" "$rule_num"
+		done
+	fi
+}
+
+cleanup_port_protection() {
+	config_load firewall
+	config_foreach remove_port_protection zone masq
+}
+
+install_port_protection() {
+	local PORT="${3}"
+	local enabled zonename chain
+
+	config_get enabled "${1}" "${2}"
+
+	if [ "${enabled}" -eq 1 ]; then
+		config_get zonename "${1}" name
+		[ -n "$zonename" ] || return 0
+
+		chain='prerouting_'$zonename'_rule'
+
+		iptables -w -t nat -I "$chain" -p tcp --dport "$PORT" -j ACCEPT -m comment --comment=CWMP_Port_protection
+		iptables -w -t nat -I "$chain" -p udp --dport "$PORT" -j ACCEPT -m comment --comment=CWMP_Port_protection
+	fi
+}
+
+add_port_protection() {
+	config_load firewall
+	config_foreach install_port_protection zone masq "${1}"
+}
+
 configure_connection_req_rules() {
 	app="${1}"
 
+	cleanup_port_protection
+
 	wan="$(uci -q get cwmp.cpe.default_wan_interface)"
 	wan="${wan:-wan}"
 
@@ -175,8 +222,11 @@ configure_connection_req_rules() {
 		fi
 	fi
 
-	port=$(uci -q get cwmp.cpe.port)
-	port="${port:-7547}"
+	port=$(uci -q -c /var/state get icwmp.cpe.port)
+	if [ -z "${port}" ]; then
+		log "cwmp cpe port not configured"
+		exit 0
+	fi
 
 	ipaddr=$(uci -q get cwmp.cpe.allowed_cr_ip)
 	if [ -n "${ipaddr}" ]; then
@@ -197,6 +247,8 @@ configure_connection_req_rules() {
 		# Close the ACS port at Lan side
 		close_downstream_acs_port "${lan}" "${port}"
 	fi
+
+	add_port_protection "${port}"
 }
 
 load_zone_names

icwmp/files/etc/init.d/icwmpd

@@ -97,7 +97,9 @@ validate_cpe_section()
 		'periodic_notify_enable:bool' \
 		'enable:bool:1' \
 		'periodic_notify_interval:uinteger' \
-		'fw_upgrade_keep_settings:bool'
+		'KeepConfig:bool' \
+		'KeepOpConf:bool' \
+		'ConfigScope:string'
 }
 
 validate_defaults() {
@@ -168,13 +170,21 @@ start_service() {
 
 stop_service()
 {
-	local switch_bank
+	local switch_bank KeepConfig KeepOpConf ConfigScope
 
 	copy_cwmp_varstate_files_to_etc
-	
 	switch_bank=$(uci -q -c /var/state/ get icwmp.cpe.switch_bank)
-	if [ -n "$switch_bank" ] && [ "$switch_bank" = "1" ]; then
-		[ -x /etc/sysmngr/fwbank ] && /etc/sysmngr/fwbank call copy_config
+	if [ "$switch_bank" = "1" ] && [ -x /etc/sysmngr/fwbank ]; then
+		KeepConfig="$(uci -q get cwmp.cpe.KeepConfig)"
+		KeepOpConf="$(uci -q get cwmp.cpe.KeepOpConf)"
+		ConfigScope="$(uci -q get cwmp.cpe.ConfigScope)"
+
+		json_init
+		[ -n "${KeepConfig}" ] && json_add_boolean "keep_config" "${KeepConfig}"
+		[ -n "${KeepOpConf}" ] && json_add_boolean "keep_opconf" "${KeepOpConf}"
+		[ -n "${ConfigScope}" ] && json_add_string "config_scope" "${ConfigScope}"
+
+		json_dump| /etc/sysmngr/fwbank call copy_config
 	fi
 }
 

icwmp/files/etc/uci-defaults/50-cwmp-align-keep-config

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+keep_settings="$(uci -q get cwmp.cpe.fw_upgrade_keep_settings)"
+if [ -n "${keep_settings}" ]; then
+	uci -q delete cwmp.cpe.fw_upgrade_keep_settings
+	uci -q set cwmp.cpe.KeepConfig="${keep_settings}"
+fi

icwmp/files/etc/uci-defaults/90-cwmpfirewall

@@ -5,7 +5,6 @@ uci -q batch <<-EOT
         set firewall.cwmp=include
         set firewall.cwmp.path=/etc/icwmpd/firewall.cwmp
         set firewall.cwmp.reload=1
-        commit firewall
 EOT
 
 exit 0

icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user

@@ -16,12 +16,12 @@ get_opt43() {
 	local opt43="$1"
 	local len="$2"
 
-	[ "$len" -gt "2" ] || return
+	[ "${len}" -gt 2 ] || return
 
 	first_byte=${opt43:0:2}
 	first_byte=$(printf "%d\n" "0x$first_byte")
 
-	if [ $len -ge 4 ] && [ $first_byte -ge 1 ] && [ $first_byte -le 4 ]; then
+	if [ "${len}" -ge 4 ] && [ "${first_byte}" -ge 1 ] && [ "${first_byte}" -le 4 ]; then
 		# it is in encapsulated form
 		# opt43 encapsulated vendor-specific option has data in below format
 		#  Code   Len   Data item        Code   Len   Data item        Code
@@ -35,7 +35,7 @@ get_opt43() {
 		data="${opt43}"
 		rem_len="${len}"
 		# parsing of suboption of option 43
-		while [ $rem_len -gt 0 ]; do
+		while [ "${rem_len}" -gt 0 ]; do
 			# get the suboption id
 			sub_opt_id=${data:0:2}
 			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
@@ -50,13 +50,13 @@ get_opt43() {
 
 			# assign the value found in sub option
 			case "${sub_opt_id}" in
-				"1") DHCP_ACS_URL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"1") DHCP_ACS_URL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"2") DHCP_PROV_CODE=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"2") DHCP_PROV_CODE=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"3") MIN_WAIT_INVL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"3") MIN_WAIT_INVL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
-				"4") INVL_MULTIPLIER=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+				"4") INVL_MULTIPLIER=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 				;;
 			esac
 
@@ -70,13 +70,14 @@ get_opt43() {
 			rem_len=$((rem_len - sub_opt_end))
 		done
 	else
-		DHCP_ACS_URL=$(echo -n $opt43 | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+		DHCP_ACS_URL=$(echo -n "${opt43}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 	fi
 }
 
 config_load cwmp
 config_get wan_intf cpe default_wan_interface "wan"
 config_get dhcp_discovery acs dhcp_discovery "0"
+config_get_bool insecure_enable acs insecure_enable "0"
 config_get dhcp_url acs dhcp_url ""
 config_get min_wait_intvl acs dhcp_retry_min_wait_interval "0"
 config_get intvl_multi acs dhcp_retry_interval_multiplier "0"
@@ -92,9 +93,9 @@ if [ "$discovery_enable" = "0" ]; then
 	return 0
 fi
 
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
+if [ "${wan_intf}" = "${INTERFACE}" ]; then
 	if [ -n "$opt43" ]; then
-		len=$(printf "$opt43"|wc -c)
+		len=$(echo -n "$opt43"|wc -c)
 		get_opt43 "$opt43" "$len"
 	fi
 
@@ -102,6 +103,17 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 		return 0
 	fi
 
+	if [ "${insecure_enable}" -eq "0" ]; then
+		case $DHCP_ACS_URL in
+		https://*)
+			log "ACS url $DHCP_ACS_URL has https"
+			;;
+		*)
+			return 0
+			;;
+		esac
+	fi
+
 	sec=$(uci -q get cwmp.acs)
 
 	if [ -z "${sec}" ]; then

ieee1905/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.7.33
+PKG_VERSION:=8.7.41
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f28f1c04cae008d7d6448ba02b992506af28448c
+PKG_SOURCE_VERSION:=9a61dcdd89be917a5a34caef8170074f117a53b2
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -116,7 +116,7 @@ MAKE_PATH:=src
 
 
 define Package/ieee1905/install
-	$(CP) ./files/* $(1)/
+	$(CP) ./files/etc $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
 	$(INSTALL_DIR) $(1)/usr/sbin

ieee1905/files/datamodel_description.json

@@ -0,0 +1,23 @@
+{
+	"Device.IEEE1905.AL.": {
+		"type": "object",
+		"protocols": [
+			"cwmp",
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"{BBF_VENDOR_PREFIX}LocalOnlyMode": {
+			"type": "boolean",
+			"read": true,
+			"write": true,
+			"protocols": [
+				"cwmp",
+				"usp"
+			],
+			"description": "Enable or disable interfaces from ieee1905.",
+			"datatype": "boolean"
+		}
+	}
+}
+

iopsys-analytics/Makefile

@@ -34,6 +34,9 @@ define Package/$(PKG_NAME)
     +@PACKAGE_syslog-ng:SYSLOGNG_LOGROTATE              \
     +PACKAGE_fluent-bit:logrotate                       \
     +@DMCLI_REMOTE_CONNECTION
+  # tools used in development/testing
+  DEPENDS+=                                             \
+    +iperf3
 
 endef
 

libdpp/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libdpp
-PKG_VERSION:=2.1.2
+PKG_VERSION:=2.1.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5f1184c52be19f3bfd3bc7e9bc582ef09b0a2b1c
+PKG_SOURCE_VERSION:=6024efd3db9dd490c07465ea9b0c15120063165c
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/libdpp.git
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

libeasy/Makefile

@@ -1,32 +1,28 @@
 #
-# Copyright (C) 2020-2023 Iopsys
+# Copyright (C) 2025 Genexis Sweden AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libeasy
-PKG_VERSION:=7.4.6
+PKG_VERSION:=7.5.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ca7b20068c9d373e41045a2e899a9c697576262c
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libeasy.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE_VERSION:=b981f7e1bd51f66041cd0c25d15af74ae1e3bc75
+PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libeasy.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
-PKG_LICENSE_FILES:=LICENSE
+PKG_LICENSE_FILES:=
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
 
 include $(INCLUDE_DIR)/package.mk
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
+include $(INCLUDE_DIR)/cmake.mk
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -34,9 +30,6 @@ define Build/Prepare
 endef
 endif
 
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall"
-
 define Package/libeasy
   SECTION:=libs
   CATEGORY:=Libraries
@@ -47,7 +40,7 @@ define Package/libeasy
 endef
 
 define Package/libeasy/description
-  Library provides common utility functions
+  This package provides libeasy.so for common utility functions.
 endef
 
 define Build/InstallDev/libeasy
@@ -67,6 +60,7 @@ define Build/InstallDev/libeasy
 endef
 
 define Build/InstallDev
+	$(call Build/InstallDev/cmake,$(1))
 	$(call Build/InstallDev/libeasy,$(1),$(2))
 endef
 

libvoice-airoha/Makefile

@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-airoha
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.7
+PKG_VERSION:=1.1.8
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -17,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=3a30086a68a3409f0396acb01380f91daabf7a2f
+PKG_SOURCE_VERSION:=9763c574ec69e2aa492db4f1296d4bcd53776fba
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

libvoice-airoha/files/etc/uci-defaults/991-libvoice-airoha

@@ -25,6 +25,5 @@ db commit
 # configure the PCM for DECT/DCX81
 [ -f "/proc/device-tree/aliases/dcx81-uart" ] && {
     uci set dect.global.pcm_fsync='SHORT_LF'
-    uci set dect.global.pcm_slot_start='8'
     uci set dect.global.dect_channel_start='3'
 }

libwifi/Makefile

@@ -1,27 +1,32 @@
 #
-# Copyright (C) 2020-2023 Iopsys
+# Copyright (C) 2019-2024 Iopsys
+# Copyright (C) 2025 Genexis Sweden AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libwifi
-PKG_VERSION:=7.13.6
+PKG_VERSION:=7.22.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d17ad7415a821e95618c4739507bf129df3fdebf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libwifi.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE_VERSION:=8e6dfd1f0d0d6b5a39dbb10a5820f3b80120564b
+PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libwifi.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=LGPL-2.1-only
-PKG_LICENSE_FILES:=LICENSE
+PKG_LICENSE_FILES:=
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
+
+MAKE_VERBOSE := 1
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/cmake.mk
 
 ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_PLATFORM=BROADCOM
@@ -42,10 +47,20 @@ else ifeq ($(CONFIG_TARGET_armvirt),y)
 else ifeq ($(CONFIG_TARGET_airoha),y)
   TARGET_PLATFORM=ECONET
   TARGET_WIFI_TYPE=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
+  TARGET_CFLAGS +=-DIOPSYS_ECONET -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
   ifeq ($(CONFIG_TARGET_airoha_an7581),y)
     TARGET_CFLAGS +=-DCONFIG_MTK
   endif
+else ifeq ($(CONFIG_TARGET_mediatek),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_WIFI_TYPE=MAC80211
+  ifeq ($(CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_cx750),y)
+    TARGET_WIFI_TYPE=MEDIATEK
+    TARGET_CFLAGS +=-DCONFIG_MTK -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
+  else ifeq ($(CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_mediatek_mt7987a-spim-nand-an8801sb),y)
+    TARGET_WIFI_TYPE=MEDIATEK
+    TARGET_CFLAGS +=-DCONFIG_MTK -I$(LINUX_DIR)/include/uapi/linux/mtk_nl80211_inc
+  endif
 else ifeq ($(CONFIG_TARGET_ipq95xx),y)
   TARGET_PLATFORM=IPQ95XX
   TARGET_WIFI_TYPE=QUALCOMM
@@ -61,13 +76,13 @@ else
 endif
 
 ifneq ($(CONFIG_PACKAGE_kmod-mt7915e_en7523),)
-  TARGET_CFLAGS=-DMT7915_VENDOR_EXT
+  TARGET_CFLAGS +=-DMT7915_VENDOR_EXT
 endif
 
 PKG_BUILD_DEPENDS:=PACKAGE_kmod-mt7915e_en7523:mt76_en7523
 
 ifneq ($(CONFIG_PACKAGE_libwifi),)
-TARGET_CFLAGS +=-DHAS_WIFI
+  CMAKE_OPTIONS +=-DHAS_WIFI=ON
 endif
 
 ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
@@ -78,18 +93,8 @@ ifeq ($(CONFIG_LIBWIFI_SKIP_PROBES),y)
   TARGET_CFLAGS +=-DLIBWIFI_BRCM_SKIP_PROBES
 endif
 
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
 
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
-	subdirs="$(subdirs)"
+CMAKE_OPTIONS += -DPLATFORM=$(TARGET_PLATFORM) -DWIFI_TYPE=$(TARGET_WIFI_TYPE)
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -97,43 +102,39 @@ define Build/Prepare
 endef
 endif
 
-define Package/libwifi-common
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=libwifi
-  SUBMENU:=IOPSYS HAL libs
-  DEPENDS:=+libopenssl
-  MENU:=1
+define Package/libwifiutils
+	SECTION:=libs
+	CATEGORY:=Libraries
+	TITLE:= WiFi utility library (libwifiutils.so)
+	DEPENDS+=+libnl +libnl-route +libeasy +libopenssl
+endef
+
+define Package/libwifiutils/description
+	Library provides WiFi utility functions
+endef
+
+define Package/libwifi
+	SECTION:=libs
+	CATEGORY:=Libraries
+	TITLE:= WiFi HAL library (libwifi-7.so.m)
+	DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcm963xx-bsp
 endef
 
 define Package/libwifi/description
-  Library provides WiFi HAL APIs and WiFi common utility functions
-endef
-
-define Package/libwifiutils
-  $(call Package/libwifi-common)
-  TITLE:= WiFi utility library (libwifiutils.so)
-  DEPENDS+=+libnl +libnl-route +libeasy
+	Library provides WiFi HAL APIs
 endef
 
 define Build/InstallDev/libwifiutils
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils/libwifiutils*.so* $(1)/usr/lib/
 endef
 
 define Package/libwifiutils/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-
-define Package/libwifi
-  $(call Package/libwifi-common)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcm963xx-bsp
+	$(CP) $(PKG_BUILD_DIR)/libwifiutils/libwifiutils*.so* $(1)/usr/lib/
 endef
 
 define Package/libwifi/config
@@ -154,13 +155,12 @@ define Package/libwifi/config
   endif
 endef
 
-
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/wifiops.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
 endef
 
 
@@ -173,7 +173,7 @@ endef
 
 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
 endef
 
 $(eval $(call BuildPackage,libwifiutils))

linux-pam/Makefile

@@ -31,8 +31,8 @@ MESON_ARGS += \
 
 define Package/linux-pam/install
 	$(INSTALL_DIR) $(1)/usr/lib/security
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/pam_faillock.uci_default $(1)/etc/uci-defaults/99-add_pam_faillock
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./linux_pam.init $(1)/etc/init.d/linux_pam
 endef
 
 $(eval $(call BuildPackage,linux-pam))

linux-pam/files/pam_faillock.uci_default

@@ -1,43 +0,0 @@
-#!/bin/sh
-
-create_faillock_files()
-{
-	# also create files needed by pam_faillock
-	touch /var/log/faillock
-	chmod 700 /var/log/faillock
-	touch /var/log/btmp
-	chmod 700 /var/log/btmp
-}
-
-update_pam_common_auth()
-{
-	local file="/etc/pam.d/common-auth"
-	local deny=6
-	local unlock_time=300
-
-	# update pam_unix.so line
-	sed -i -E 's|^.*pam_unix\.so.*|auth\t sufficient\tpam_unix.so nullok_secure|' "$file"
-
-	# Insert pam_faillock lines before and after pam_unix.so
-	sed -i -E "/pam_unix.so nullok_secure/i auth     required       pam_faillock.so preauth deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
-	sed -i -E "/pam_unix.so nullok_secure/a auth     [default=die]  pam_faillock.so authfail audit deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
-}
-
-update_pam_common_account()
-{
-	# update account file
-	sed -i "/pam_unix.so/ i account  required       pam_faillock.so" /etc/pam.d/common-account
-}
-
-if [ -f "/usr/lib/security/pam_faillock.so" ]; then
-	update_pam_common_auth
-	update_pam_common_account
-	create_faillock_files
-fi
-
-if [ -f /etc/config/sshd ]; then
-	uci -q set sshd.@sshd[0].UsePAM=1
-	uci commit sshd
-fi
-
-exit 0

linux-pam/linux_pam.init

@@ -0,0 +1,18 @@
+#!/bin/sh /etc/rc.common
+
+START=11
+STOP=90
+USE_PROCD=1
+
+create_faillock_files()
+{
+	# also create files needed by pam_faillock
+	touch /var/log/faillock
+	chmod 700 /var/log/faillock
+	touch /var/log/btmp
+	chmod 700 /var/log/btmp
+}
+
+boot() {
+	create_faillock_files
+}

logmngr/files/etc/config/logmngr

@@ -8,7 +8,7 @@ config source 'default_source'
 
 config template 'default_template'
 	option name 'default_template'
-	option expression '{time} {hostname} {ident}: {message}'
+	option expression '{time} {hostname} {ident}[{pid}]: {message}'
 
 config action 'default_action'
 	option name 'default_action'

logmngr/files/etc/init.d/logmngr

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 
-START=12
+START=09
 
 USE_PROCD=1
 

logmngr/files/etc/uci-defaults/10-logmngr_config_migrate

@@ -11,7 +11,7 @@ fi
 if ! uci -q get logmngr.default_template > /dev/null; then
 	uci -q set logmngr.default_template=template
 	uci -q set logmngr.default_template.name='default_template'
-	uci -q set logmngr.default_template.expression='{time} {hostname} {ident}: {message}'
+	uci -q set logmngr.default_template.expression='{time} {hostname} {ident}[{pid}]: {message}'
 fi
 
 if uci -q get logmngr.a1 >/dev/null; then

logmngr/files/lib/logmngr/fluent-bit.sh

@@ -77,6 +77,12 @@ create_default_filters() {
 	append_conf "    rename          msg     message"
 	append_conf ""
 
+	append_conf "[FILTER]"
+	append_conf "    name            modify"
+	append_conf "    match           *"
+	append_conf "    add             pid     0"
+	append_conf ""
+
 	append_conf "[FILTER]"
 	append_conf "    name            sysinfo"
 	append_conf "    match           *"

map-agent/Config.in

@@ -55,12 +55,20 @@ config AGENT_OPER_CHANNEL_CHANGE_RELAY_MCAST
 config AGENT_USE_LIBDPP
 	bool "Depend on libdpp for DPP EasyConnect"
 
+config AGENT_ZEROTOUCH_DPP
+	bool "Enable Zero-touch DPP bootstrapping. Depends on libztdpp.so"
+	default n
+
 config AGENT_CHECK_PARTIAL_WIFI_RELOAD
 	bool "Option that allow SSID/PSK simple reload"
 	default y
 
-config DYNBHD_DYNAMICALLY_PERSIST_CONTROLLER
-	bool "Let dynbhd through AP-Autoconfiguration Search and DHCP Discovery determine the controller or agent role"
+config DYNBH
+	bool "Enable map-agent dynamic Ethernet backhaul management"
+	default n
+
+config DYNBH_DYNAMICALLY_PERSIST_CONTROLLER
+	bool "Let map-agent through AP-Autoconfiguration Search and DHCP Discovery determine the controller or agent role"
 
 config AGENT_UNASSOC_STA_CONT_MONITOR
 	bool "Enable continuos monitoring of unassociated clients"

map-agent/Makefile

@@ -1,13 +1,14 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
+# Copyright (C) 2025 Genexis Sweden AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=6.3.6.15
+PKG_VERSION:=6.4.3.11
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=7b05d265776fca2ff84a63188fcec55c08057e33
+PKG_SOURCE_VERSION:=9c74ba03e3f543961afe54bb08668f87f4ae169f
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
@@ -26,7 +27,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/map-agent
   SECTION:=utils
   CATEGORY:=Utilities
-  TITLE:=WiFi multi-AP Agent (EasyMesh R2)
+  TITLE:=Wi-Fi Multi-AP Agent (EasyMesh R6)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
 	   +ieee1905-map-plugin +ip-bridge +AGENT_USE_LIBDPP:libdpp \
 	   +uuidgen +openssl-util +!TARGET_brcmbca:ebtables-legacy \
@@ -37,21 +38,12 @@ ifeq ($(CONFIG_AGENT_USE_LIBDPP),y)
   TARGET_CFLAGS += -DUSE_LIBDPP
 endif
 
-define Package/dynbhd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Dynamic Backhaul Daemon
-  DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +ieee1905-map-plugin +map-agent
-endef
-
+ifeq ($(CONFIG_AGENT_ZEROTOUCH_DPP),y)
+  TARGET_CFLAGS += -DZEROTOUCH_DPP
+endif
 
 define Package/map-agent/description
- This package implements EasyMesh R2 compliant WiFi Agent.
-endef
-
-define Package/dynbhd/description
- Dyanmic LAN/WAN port detection and loop avoidance.
+  This package provides EasyMesh R6 compliant Wi-Fi Multi-AP Agent.
 endef
 
 define Package/map-agent/config
@@ -111,7 +103,11 @@ ifeq ($(CONFIG_AGENT_CHECK_PARTIAL_WIFI_RELOAD),y)
 TARGET_CFLAGS += -DCHECK_PARTIAL_WIFI_RELOAD
 endif
 
-ifeq ($(CONFIG_DYNBHD_DYNAMICALLY_PERSIST_CONTROLLER),y)
+ifeq ($(CONFIG_DYNBH),y)
+TARGET_CFLAGS += -DDYNBH
+endif
+
+ifeq ($(CONFIG_DYNBH_DYNAMICALLY_PERSIST_CONTROLLER),y)
 TARGET_CFLAGS += -DPERSIST_CONTROLLER
 endif
 
@@ -124,6 +120,10 @@ MAKE_PATH:=src
 define Package/map-agent/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
+ifeq ($(CONFIG_DYNBH),y)
+	$(RM) $(1)/etc/hotplug.d/ethernet/map-dynamic-backhaul
+	$(RM) $(1)/etc/hotplug.d/ethernet/map-topology-discovery
+endif
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/lib/wifi
@@ -131,15 +131,6 @@ define Package/map-agent/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef
 
-define Package/dynbhd/install
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi/dynbhd
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/ethernet
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/dynbhd $(1)/usr/sbin/dynbhd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/api $(1)/lib/wifi/dynbhd/api
-#	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dynbh/map-dynamic-backhaul $(1)/etc/hotplug.d/ethernet/map-dynamic-backhaul
-endef
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
@@ -148,4 +139,3 @@ endef
 endif
 
 $(eval $(call BuildPackage,map-agent))
-$(eval $(call BuildPackage,dynbhd))

map-agent/files/etc/config/mapagent

@@ -17,7 +17,7 @@ config dynamic_backhaul
 	option missing_bh_reconfig_timer '1800'
 
 config controller_select
-	option id 'auto'
+	option mode 'auto'
 	option probe_int '20'
 	option retry_int '9'
 	option autostart '1'

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -27,11 +27,6 @@ done
 al_brnet="${al_bridge:3}"
 [ "$(uci -q get network.${al_brnet}.proto)" == "dhcp" ] || exit 0
 
-############## Dynamic Backhaul Daemon ##############
-if [ -n "$(which dynbhd)" ]; then
-	exit 0
-fi
-########################################################
 
 ################ Dedicated ETH WAN Port ################
 wanport="$(jsonfilter -i /etc/board.json -e @.network.wan.device)"
@@ -95,7 +90,8 @@ if [ "$LINK" = "up" ]; then
 	config_foreach remove_from_bridge bsta
 	config_foreach update_bstas bsta down
 
-	/lib/wifi/multiap set_uplink "eth" "$PORT"
+	hwaddr="$(ifconfig $PORT | grep -i hwaddr | awk '{print $5}' | awk '{print tolower($0)}')"
+	/lib/wifi/multiap set_uplink "eth" "$PORT" "$hwaddr"
 else
 	/lib/wifi/multiap unset_uplink "eth"
 	#rm -f "$map_bh_file"

map-agent/files/etc/init.d/mapagent

@@ -1,26 +1,12 @@
 #!/bin/sh /etc/rc.common
 
-START=98
+START=97
 STOP=20
 
 USE_PROCD=1
 
 IS_CFG_VALID=1
 
-MAP_DEV="map_dev"
-MAP_IF="map"
-
-
-start_dynbhd_service() {
-	rm -f /var/run/multiap/multiap.backhaul
-	procd_open_instance
-	procd_set_param command "/usr/sbin/dynbhd"
-	procd_set_param respawn
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
-	procd_close_instance
-}
-
 validate_agent_section() {
 	uci_validate_section mapagent agent "agent" \
 		'enabled:bool:true' \
@@ -51,7 +37,7 @@ validate_cs_section() {
 
 	uci_validate_section mapagent $section "${section}" \
 		'local:bool:false' \
-		'id:string' \
+		'mode:string' \
 		'probe_int:range(0,1000):20' \
 		'retry_int:range(0,255):3' \
 		'autostart:bool:false'
@@ -179,17 +165,6 @@ create_dir() {
 }
 
 start_service() {
-	if [ -f /usr/sbin/dynbhd ]; then
-		# Start dynbhd only if the device is operating in extender/repeater mode
-		al_bridge="$(uci -q get mapagent.agent.al_bridge)"
-		if [ "${al_bridge:0:3}" = "br-" ]; then
-			al_brnet="${al_bridge:3}"
-			if [ "$(uci -q get network.${al_brnet}.proto)" == "dhcp" ]; then
-				start_dynbhd_service
-			fi
-		fi
-	fi
-
 	config_load "mapagent"
 	validate_agent_config || return 1;
 

map-agent/files/etc/uci-defaults/994-map-set-cntlr-sel-mode

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+adapt_cntlr_sel() {
+	local section=$1
+        id=$(uci -q get mapagent.@controller_select[0].id)
+
+        uci -q del mapagent.@controller_select[0].id
+
+        # re-apply any custom value
+        [ -z "${id}" ] || uci -q set mapagent.@controller_select[0].mode="${id}"
+}
+
+adapt_cntlr_sel

map-agent/files/lib/multiap/map_genconfig

@@ -10,6 +10,11 @@ network_mode="$(fw_printenv -n netmode)" # default is layer3
 multiap_mode="$(fw_printenv -n multiap_mode)" # default is full
 disable_mlo="$(fw_printenv -n disable_mlo)"
 
+is_logan() {
+	[ -d /sys/module/mt_wifi ] && return 0
+	return 1
+}
+
 is_airoha() {
 	[ -f /proc/device-tree/compatible ] || return
 	strings /proc/device-tree/compatible | grep -qE '^(econet,|airoha,)'; return
@@ -44,19 +49,16 @@ generate_multiap_config() {
 			2g)
 				mode_band=2
 				priority=2
-				dpp_chan="81/1"
 				channels="1 6 11"
 			;;
 			5g)
 				mode_band=5
 				priority=1
-				dpp_chan="128/36"
 				channels="36-64 100-112"
 			;;
 			6g)
 				mode_band=6
 				priority=0
-				dpp_chan="133/49"
 			;;
 		esac
 
@@ -67,45 +69,44 @@ generate_multiap_config() {
 		device="$dev"
 
 		ifprefix_radio=""
-		if is_airoha; then
+		if is_logan; then
+			uci set mapagent.agent.mld_prefix="bss"
+			ifname_sta=""
+			case "$band" in
+				2g)
+					ifprefix="ra%"
+					ifname="ra0"
+					ifname_bh="ra1"
+					ifname_sta="apcli0"
+				;;
+				5g)
+					ifprefix="rai%"
+					ifname="rai0"
+					ifname_bh="rai1"
+					ifname_sta="apclii0"
+				;;
+				6g)
+					ifprefix="rax%"
+					ifname="rax0"
+					ifname_bh="rax1"
+					ifname_sta="apclix0"
+				;;
+			esac
+			ifprefix_radio="${ifprefix}"
+			if [ "${network_mode}" == "extender" ]; then
+				ifname="${ifname_sta}"
+			fi
+
+			[ "$disable_mlo" == "1" ] || {
+				uci set wireless.$dev.mlo="1"
+				uci set wireless.$dev.mlo_capable="1"
+			}
+		elif is_airoha; then
 			if [ -d "/sys/module/mt76" ]; then
 				ifprefix="wlan%_%"
 				ifname="wlan${devidx}_0"
 				ifname_bh="wlan${devidx}_1"
-			else
-				uci set mapagent.agent.mld_prefix="bss"
-				ifname_sta=""
-				case "$band" in
-					2g)
-						ifprefix="ra%"
-						ifname="ra0"
-						ifname_bh="ra1"
-						ifname_sta="apcli0"
-					;;
-					5g)
-						ifprefix="rai%"
-						ifname="rai0"
-						ifname_bh="rai1"
-						ifname_sta="apclii0"
-					;;
-					6g)
-						ifprefix="rax%"
-						ifname="rax0"
-						ifname_bh="rax1"
-						ifname_sta="apclix0"
-					;;
-				esac
-				ifprefix_radio="${ifprefix}"
-				if [ "${network_mode}" == "extender" ]; then
-					ifname="${ifname_sta}"
-				fi
-
-				[ "$disable_mlo" == "1" ] || {
-					uci set wireless.$dev.mlo="1"
-					uci set wireless.$dev.mlo_capable="1"
-				}
 			fi
-
 			uci set wireless.$dev.channels="$channels"
 			uci commit wireless
 		elif is_broadcom; then
@@ -158,13 +159,17 @@ generate_multiap_config() {
 				uci set mapagent.@bsta[-1].band="$mode_band"
 				uci set mapagent.@bsta[-1].priority="$priority"
 
-				#uci add mapagent dpp_uri
-				#uci set mapagent.@dpp_uri[-1].type="qrcode"
-				#uci set mapagent.@dpp_uri[-1].device="$device"
-				#uci set mapagent.@dpp_uri[-1].ifname="$ifname"
-				#uci set mapagent.@dpp_uri[-1].band="$mode_band"
-				#uci set mapagent.@dpp_uri[-1].chirp_interval="10"
-				#uci add_list mapagent.@dpp_uri[-1].dpp_chan="$dpp_chan"
+				# add dpp_chirp section for 2.4GHz bSTA
+				if [ $mode_band -eq 2 ]; then
+					uci add mapagent dpp_chirp
+					uci set mapagent.@dpp_chirp[-1].type="qrcode"
+					uci set mapagent.@dpp_chirp[-1].device="$device"
+					uci set mapagent.@dpp_chirp[-1].ifname="$ifname"
+					uci set mapagent.@dpp_chirp[-1].band="$mode_band"
+					for channel in $channels; do
+						uci add_list mapagent.@dpp_chirp[-1].channel="$channel"
+					done
+				fi
 
 				if [ $generate_wireless_sta_config -eq 1 ]; then
 					secname="default_sta_${device}"

map-controller/Config.in

@@ -39,6 +39,10 @@ config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
 config CONTROLLER_USE_LIBDPP
 	bool "Depend on libdpp for DPP EasyConnect"
 
+config CONTROLLER_ZEROTOUCH_DPP
+	bool "Enable Zero-touch DPP bootstrapping via passphrase."
+	default n
+
 config CONTROLLER_PROPAGATE_PROBE_REQ
 	depends on CONTROLLER_EASYMESH_VENDOR_EXT
 	bool "Enable publishing probe requests vendor specific messages as UBUS events"

map-controller/Makefile

@@ -6,9 +6,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=6.4.2.9
+PKG_VERSION:=6.4.4.11
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=c427bbaa53ce470a45a59326281f214f1111c3f7
+PKG_SOURCE_VERSION:=7e0d6921fad51c446777acf93ddb9bad87eccf76
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@genexis.eu>
 
 LOCAL_DEV=0
@@ -36,6 +36,9 @@ ifeq ($(CONFIG_CONTROLLER_USE_LIBDPP),y)
   TARGET_CFLAGS += -DUSE_LIBDPP
 endif
 
+ifeq ($(CONFIG_CONTROLLER_ZEROTOUCH_DPP),y)
+  TARGET_CFLAGS += -DZEROTOUCH_DPP
+endif
 
 define Package/map-controller/description
  This package provides WiFi MultiAP Controller as per the EasyMesh-R2 specs.
@@ -81,6 +84,7 @@ define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/src/cntlr_commands_impl.h $(1)/usr/include/map-controller
 	$(CP) $(PKG_BUILD_DIR)/src/cntlr_commands.h $(1)/usr/include/map-controller
 	$(CP) $(PKG_BUILD_DIR)/src/cntlr_apis.h $(1)/usr/include/map-controller
+	$(CP) $(PKG_BUILD_DIR)/src/cntlr_plugin.h $(1)/usr/include/map-controller
 	$(CP) $(PKG_BUILD_DIR)/src/wifi_opclass.h $(1)/usr/include/map-controller
 	$(CP) $(PKG_BUILD_DIR)/src/steer_module.h $(1)/usr/include/map-controller
 	$(CP) $(PKG_BUILD_DIR)/src/timer.h $(1)/usr/include/map-controller

map-controller/files/etc/config/mapcontroller

@@ -4,16 +4,16 @@ config controller 'controller'
 	option registrar '2 5 6'
 	option debug '2'
 	option bcn_metrics_max_num '10'
-	option initial_channel_scan '0'
 	option enable_ts '0'
 	option primary_vid '1'
 	option primary_pcp '0'
-	option stale_sta_timeout '30d'
+	option stale_sta_timeout '20d'
 	option de_collect_interval '60'
+	list plugin 'zerotouch'
 
-config sta_steering
+config sta_steering 'sta_steering'
 	option enable_sta_steer '1'
-	option enable_bsta_steer '0'
+	option enable_bsta_steer '1'
 	option rcpi_threshold_2g '70'
 	option rcpi_threshold_5g '86'
 	option rcpi_threshold_6g '86'
@@ -23,8 +23,10 @@ config sta_steering
 	option plugins_enabled '1'
 	option plugins_policy 'any'
 	list plugins 'rcpi'
+	list plugins 'rate'
+	list plugins 'bsteer'
 
-config channel_plan
+config channel_plan 'channel_plan'
 	option preclear_dfs '0'
 	option acs '0'
 

map-controller/files/etc/init.d/mapcontroller

@@ -20,7 +20,6 @@ validate_controller_section() {
 		'registrar:string' \
 		'debug:range(0,16)' \
 		'bcn_metrics_max_num:range(1,256)' \
-		'initial_channel_scan:bool:true' \
 		'resend_num:uinteger:0' \
 		'allow_bgdfs:range(0,2629744)' \
 		'stale_sta_timeout:string' \

map-controller/files/etc/uci-defaults/99-mapcntlr-uci-rename-singletons

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+cfg=mapcontroller
+
+# singleton sections
+sections="channel_plan sta_steering"
+
+for sec in $sections; do
+    # find unnamed section of given type, only index 0
+    s=$(uci show $cfg | grep -oE "@${sec}\[0\]" | sort -u)
+    [ "$s" = "" ] && continue
+
+    uci rename $cfg.$s=$sec
+done
+
+uci commit $cfg

map-plugins/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-plugins
-PKG_VERSION:=1.0.32
+PKG_VERSION:=1.2.7
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d8b310edad1b9777aed805682394e3f9bb300d81
+PKG_SOURCE_VERSION:=dd873ca4e2cb321302dae1955da24d1be271b2b1
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-plugins.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -27,12 +27,18 @@ include $(INCLUDE_DIR)/package.mk
 
 include $(wildcard plugins/*.mk)
 
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
 MAKE_FLAGS += \
 	CFLAGS="$(TARGET_CFLAGS) -Wall"
 
 plugins := \
 	$(if $(CONFIG_PACKAGE_map-plugins-steer-rate),steer-rate)   \
-	$(if $(CONFIG_PACKAGE_map-plugins-bsteer),bsteer)
+	$(if $(CONFIG_PACKAGE_map-plugins-bsteer),bsteer) \
+	$(if $(CONFIG_PACKAGE_map-plugins-zero-touch),zero-touch)
 
 ppkg:=$(patsubst plugins/%.mk,map-plugins-%,$(wildcard plugins/*.mk))
 
@@ -53,7 +59,8 @@ define Package/map-plugins
 endef
 
 define Package/map-plugins/description
-	Provides extra Multi-AP services viz. steering, channel-planning, self-organizing network etc.
+	Provides extra Multi-AP services viz. steering, channel-planning,
+	self-organizing network, zero-touch onboarding etc.
 endef
 
 define Package/map-plugins/install
@@ -64,5 +71,11 @@ define Build/Compile
 	$(foreach p,$(plugins),$(call Build/Compile/map-plugins-$(p), $(1)))
 endef
 
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -r --exclude=.* ~/git/map-plugins/ $(PKG_BUILD_DIR)/
+endef
+endif
+
 $(eval $(call BuildPackage,map-plugins))
 $(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))

map-plugins/plugins/zero-touch.mk

@@ -0,0 +1,22 @@
+define Package/map-plugins-zero-touch
+	$(call Package/map-plugins/Default)
+	TITLE:=Full Zero-touch bootstrapping of Wi-Fi Repeater device(s)
+	DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+		 +libjson-c +libblobmsg-json +map-controller \
+		 +map-plugins
+endef
+
+define Package/map-plugins-zero-touch/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
+	$(CP) $(PKG_BUILD_DIR)/zero-touch/zerotouch.so $(1)/usr/lib/mapcontroller/zerotouch.so
+	$(CP) $(PKG_BUILD_DIR)/zero-touch/libztdpp.so $(1)/usr/lib/libztdpp.so
+
+endef
+
+define Build/Compile/map-plugins-zero-touch
+	$(MAKE) -C $(PKG_BUILD_DIR)/zero-touch \
+		CC="$(TARGET_CC)" \
+		CFLAGS="$(TARGET_CFLAGS)" \
+		LDFLAGS="$(TARGET_LDFLAGS)";
+endef

mosquitto-auth-plugin/Config.in

@@ -0,0 +1,7 @@
+if PACKAGE_mosquitto-auth-plugin
+
+config MOSQUITTO_AUTH_PAM_SUPPORT
+	bool "Enable support of Linux PAM module for Authentication"
+	default y
+
+endif

mosquitto-auth-plugin/Makefile

@@ -13,33 +13,42 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=mosquitto-auth-shadow
-PKG_VERSION:=1.0.1
+PKG_NAME:=mosquitto-auth-plugin
+PKG_VERSION:=1.2.0
 
 PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
 PKG_LICENSE:=EPL-2.0
 
 PKG_BUILD_PARALLEL:=1
+PKG_CONFIG_DEPENDS:=CONFIG_MOSQUITTO_AUTH_PAM_SUPPORT
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/mosquitto-auth-shadow
+define Package/mosquitto-auth-plugin
   SECTION:=net
   CATEGORY:=Network
   TITLE:=mosquitto - /etc/shadow authentication plugin
-  DEPENDS:=+mosquitto-ssl
+  DEPENDS:=+mosquitto-ssl +MOSQUITTO_AUTH_PAM_SUPPORT:libpam
   USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
 endef
 
-define Package/mosquitto-auth-shadow/description
+define Package/mosquitto-auth-plugin/description
   Plugin for the mosquitto MQTT message broker that authenticates
   users using /etc/shadow
 endef
 
-define Package/mosquitto-auth-shadow/install
+define Package/mosquitto-auth-plugin/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifeq ($(CONFIG_MOSQUITTO_AUTH_PAM_SUPPORT),y)
+TARGET_CFLAGS+=-DENABLE_PAM_SUPPORT
+endif
+
+define Package/mosquitto-auth-plugin/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_plugin.so $(1)/usr/lib/
 	$(CP) ./files/* $(1)/
 endef
 
-$(eval $(call BuildPackage,mosquitto-auth-shadow))
+$(eval $(call BuildPackage,mosquitto-auth-plugin))

mosquitto-auth-plugin/src/Makefile

@@ -11,15 +11,15 @@
 #   Erik Karlsson - initial implementation
 #
 
-TARGETS = mosquitto_auth_shadow.so
+TARGETS = mosquitto_auth_plugin.so
 
 all: $(TARGETS)
 
 %.pic.o: %.c
 	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
 
-mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
-	$(CC) $(LDFLAGS) -shared -o $@ $^
+mosquitto_auth_plugin.so: mosquitto_auth_plugin.pic.o
+	$(CC) $(LDFLAGS) -shared -o $@ $^ $(if $(filter -DENABLE_PAM_SUPPORT,$(CFLAGS)),-lpam)
 
 clean:
 	rm -f *.o $(TARGETS)

mosquitto-auth-plugin/src/mosquitto_auth_plugin.c

@@ -0,0 +1,616 @@
+/*
+ * Copyright (c) 2022 Genexis B.V.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * https://www.eclipse.org/legal/epl-2.0/
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ *
+ * Contributors:
+ *   Erik Karlsson - initial implementation
+ */
+
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <string.h>
+#include <shadow.h>
+#include <crypt.h>
+#include <stdlib.h>
+#include <arpa/inet.h>
+#include <mosquitto.h>
+#include <mosquitto_broker.h>
+#include <mosquitto_plugin.h>
+
+#ifdef ENABLE_PAM_SUPPORT
+#include <security/pam_appl.h>
+#endif
+
+#define MAX_USERS 256
+#define MAX_SUBNETS_PER_USER 32
+
+typedef struct {
+	union {
+		uint32_t ipv4_network;
+		uint8_t ipv6_network[16];
+	};
+	union {
+		uint32_t ipv4_netmask;
+		uint8_t ipv6_netmask[16];
+	};
+	int is_ipv6;
+} subnet_t;
+
+typedef struct {
+	char username[64];
+	subnet_t allow_subnets[MAX_SUBNETS_PER_USER];
+	int allow_count;
+	subnet_t deny_subnets[MAX_SUBNETS_PER_USER];
+	int deny_count;
+} user_acl_t;
+
+typedef struct {
+	user_acl_t users[MAX_USERS];
+	int user_count;
+	mosquitto_plugin_id_t *identifier;
+} plugin_data_t;
+
+/* Parse CIDR notation for IPv4 or IPv6 (e.g., "192.168.1.0/24" or "2001:db8::/32") */
+static int parse_subnet(const char *cidr, subnet_t *subnet)
+{
+	char ip_str[128];
+	char *slash;
+	int prefix_len;
+	struct in_addr addr4;
+	struct in6_addr addr6;
+
+	strncpy(ip_str, cidr, sizeof(ip_str) - 1);
+	ip_str[sizeof(ip_str) - 1] = '\0';
+
+	slash = strchr(ip_str, '/');
+	if (slash != NULL) {
+		*slash = '\0';
+		prefix_len = atoi(slash + 1);
+	}
+
+	/* Try IPv4 first */
+	if (inet_pton(AF_INET, ip_str, &addr4) == 1) {
+		subnet->is_ipv6 = 0;
+		if (slash == NULL)
+			prefix_len = 32;
+		if (prefix_len < 0 || prefix_len > 32)
+			return -1;
+
+		subnet->ipv4_network = ntohl(addr4.s_addr);
+		subnet->ipv4_netmask = prefix_len == 0 ? 0 : (~0U << (32 - prefix_len));
+		subnet->ipv4_network &= subnet->ipv4_netmask;
+		return 0;
+	}
+
+	/* Try IPv6 */
+	if (inet_pton(AF_INET6, ip_str, &addr6) == 1) {
+		subnet->is_ipv6 = 1;
+		if (slash == NULL)
+			prefix_len = 128;
+		if (prefix_len < 0 || prefix_len > 128)
+			return -1;
+
+		/* Copy network address */
+		memcpy(subnet->ipv6_network, addr6.s6_addr, 16);
+
+		/* Generate netmask */
+		memset(subnet->ipv6_netmask, 0, 16);
+		for (int i = 0; i < prefix_len / 8; i++)
+			subnet->ipv6_netmask[i] = 0xff;
+		if (prefix_len % 8)
+			subnet->ipv6_netmask[prefix_len / 8] = ~((1 << (8 - (prefix_len % 8))) - 1);
+
+		/* Apply netmask to network address */
+		for (int i = 0; i < 16; i++)
+			subnet->ipv6_network[i] &= subnet->ipv6_netmask[i];
+
+		return 0;
+	}
+
+	return -1;
+}
+
+/* Check if IPv4 address is in subnet */
+static int ipv4_in_subnet(uint32_t ip, const subnet_t *subnet)
+{
+	if (subnet->is_ipv6)
+		return 0;
+	return (ip & subnet->ipv4_netmask) == subnet->ipv4_network;
+}
+
+/* Check if IPv6 address is in subnet */
+static int ipv6_in_subnet(const uint8_t *ip, const subnet_t *subnet)
+{
+	if (!subnet->is_ipv6)
+		return 0;
+	for (int i = 0; i < 16; i++) {
+		if ((ip[i] & subnet->ipv6_netmask[i]) != subnet->ipv6_network[i])
+			return 0;
+	}
+	return 1;
+}
+
+/* Check if IP is in any subnet in the list */
+static int ip_in_subnet_list(const char *client_address, const subnet_t *subnets, int count)
+{
+	struct in_addr addr4;
+	struct in6_addr addr6;
+	uint32_t ipv4;
+
+	/* Try IPv4 */
+	if (inet_pton(AF_INET, client_address, &addr4) == 1) {
+		ipv4 = ntohl(addr4.s_addr);
+		for (int i = 0; i < count; i++) {
+			if (ipv4_in_subnet(ipv4, &subnets[i]))
+				return 1;
+		}
+		return 0;
+	}
+
+	/* Try IPv6 */
+	if (inet_pton(AF_INET6, client_address, &addr6) == 1) {
+		for (int i = 0; i < count; i++) {
+			if (ipv6_in_subnet(addr6.s6_addr, &subnets[i]))
+				return 1;
+		}
+		return 0;
+	}
+
+	return 0;
+}
+
+/* Find or create user ACL entry */
+static user_acl_t* find_or_create_user_acl(plugin_data_t *pdata, const char *username)
+{
+	user_acl_t *user;
+
+	/* Find existing user */
+	for (int i = 0; i < pdata->user_count; i++) {
+		if (strcmp(pdata->users[i].username, username) == 0)
+			return &pdata->users[i];
+	}
+
+	/* Create new user if not found */
+	if (pdata->user_count >= MAX_USERS) {
+		mosquitto_log_printf(MOSQ_LOG_ERR,
+			"subnet_acl: Max users exceeded");
+		return NULL;
+	}
+
+	user = &pdata->users[pdata->user_count];
+	strncpy(user->username, username, sizeof(user->username) - 1);
+	user->username[sizeof(user->username) - 1] = '\0';
+	user->allow_count = 0;
+	user->deny_count = 0;
+	pdata->user_count++;
+
+	return user;
+}
+
+/* Parse subnet ACL file with simplified format
+ * Format:
+ * # Comment lines
+ * subnet allow <username> <cidr>
+ * subnet deny <username> <cidr>
+ */
+static int load_subnet_acl_config(plugin_data_t *pdata, const char *config_file)
+{
+	FILE *fp;
+	char line[512];
+	int line_num = 0;
+
+	/* Initialize user count */
+	pdata->user_count = 0;
+
+	/* Config file is optional - if not provided, no subnet filtering */
+	if (config_file == NULL) {
+		mosquitto_log_printf(MOSQ_LOG_INFO,
+			"subnet_acl: No subnet ACL file specified, subnet filtering disabled");
+		return 0;
+	}
+
+	/* If config file is specified but cannot be opened, this is a fatal error */
+	fp = fopen(config_file, "r");
+	if (fp == NULL) {
+		mosquitto_log_printf(MOSQ_LOG_ERR,
+			"subnet_acl: Failed to open subnet ACL file '%s'", config_file);
+		return -1;
+	}
+
+	while (fgets(line, sizeof(line), fp) != NULL) {
+		char *token, *saveptr;
+		char *action, *username, *cidr;
+		user_acl_t *user;
+		subnet_t subnet;
+
+		line_num++;
+
+		/* Remove newline and comments */
+		line[strcspn(line, "\r\n")] = '\0';
+		char *comment = strchr(line, '#');
+		if (comment)
+			*comment = '\0';
+
+		/* Trim leading whitespace */
+		char *line_start = line;
+		while (*line_start == ' ' || *line_start == '\t')
+			line_start++;
+
+		/* Skip empty lines */
+		if (*line_start == '\0')
+			continue;
+
+		/* Parse: subnet allow|deny <username> <cidr> */
+		token = strtok_r(line_start, " \t", &saveptr);
+		if (token == NULL)
+			continue;
+
+		/* Must start with "subnet" */
+		if (strcmp(token, "subnet") != 0) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Invalid directive '%s' at line %d (expected 'subnet')",
+				token, line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Get allow/deny */
+		action = strtok_r(NULL, " \t", &saveptr);
+		if (action == NULL) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Missing allow/deny at line %d", line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		if (strcmp(action, "allow") != 0 && strcmp(action, "deny") != 0) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Invalid action '%s' at line %d (use 'allow' or 'deny')",
+				action, line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Get username */
+		username = strtok_r(NULL, " \t", &saveptr);
+		if (username == NULL) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Missing username at line %d", line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Get CIDR */
+		cidr = strtok_r(NULL, " \t", &saveptr);
+		if (cidr == NULL) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Missing CIDR at line %d", line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Parse subnet */
+		if (parse_subnet(cidr, &subnet) != 0) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Invalid CIDR '%s' at line %d", cidr, line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Find or create user */
+		user = find_or_create_user_acl(pdata, username);
+		if (user == NULL) {
+			mosquitto_log_printf(MOSQ_LOG_ERR,
+				"subnet_acl: Max users (%d) exceeded at line %d", MAX_USERS, line_num);
+			fclose(fp);
+			return -1;
+		}
+
+		/* Add to appropriate list */
+		if (strcmp(action, "allow") == 0) {
+			if (user->allow_count >= MAX_SUBNETS_PER_USER) {
+				mosquitto_log_printf(MOSQ_LOG_ERR,
+					"subnet_acl: Max allow subnets (%d) exceeded for user '%s' at line %d",
+					MAX_SUBNETS_PER_USER, user->username, line_num);
+				fclose(fp);
+				return -1;
+			}
+			user->allow_subnets[user->allow_count] = subnet;
+			user->allow_count++;
+
+			mosquitto_log_printf(MOSQ_LOG_DEBUG,
+				"subnet_acl: User '%s' allow subnet %s",
+				user->username, cidr);
+
+		} else { /* deny */
+			if (user->deny_count >= MAX_SUBNETS_PER_USER) {
+				mosquitto_log_printf(MOSQ_LOG_ERR,
+					"subnet_acl: Max deny subnets (%d) exceeded for user '%s' at line %d",
+					MAX_SUBNETS_PER_USER, user->username, line_num);
+				fclose(fp);
+				return -1;
+			}
+			user->deny_subnets[user->deny_count] = subnet;
+			user->deny_count++;
+
+			mosquitto_log_printf(MOSQ_LOG_DEBUG,
+				"subnet_acl: User '%s' deny subnet %s",
+				user->username, cidr);
+		}
+	}
+
+	fclose(fp);
+
+	/* Log summary */
+	for (int i = 0; i < pdata->user_count; i++) {
+		user_acl_t *user = &pdata->users[i];
+		if (user->allow_count > 0 || user->deny_count > 0) {
+			mosquitto_log_printf(MOSQ_LOG_INFO,
+				"subnet_acl: User '%s' has %d allow and %d deny subnet rules",
+				user->username, user->allow_count, user->deny_count);
+		}
+	}
+
+	mosquitto_log_printf(MOSQ_LOG_NOTICE,
+		"subnet_acl: Loaded subnet restrictions for %d user(s)", pdata->user_count);
+
+	return 0;
+}
+
+/* Find user ACL entry */
+static const user_acl_t* find_user_acl(const plugin_data_t *pdata, const char *username)
+{
+	for (int i = 0; i < pdata->user_count; i++) {
+		if (strcmp(pdata->users[i].username, username) == 0)
+			return &pdata->users[i];
+	}
+	return NULL;
+}
+
+/* Check subnet access on authentication (connection time)
+ * Returns: MOSQ_ERR_SUCCESS if allowed, MOSQ_ERR_AUTH if denied
+ */
+static int check_subnet_on_auth(plugin_data_t *pdata, struct mosquitto_evt_basic_auth *ed)
+{
+	const user_acl_t *user_acl;
+	const char *client_address;
+
+	/* Skip if no subnet config loaded */
+	if (pdata == NULL || pdata->user_count == 0)
+		return MOSQ_ERR_SUCCESS;
+
+	/* Skip anonymous users */
+	if (ed->username == NULL)
+		return MOSQ_ERR_SUCCESS;
+
+	/* Find user's subnet ACL */
+	user_acl = find_user_acl(pdata, ed->username);
+
+	/* If user not in config or has no subnet rules, allow */
+	if (user_acl == NULL || (user_acl->allow_count == 0 && user_acl->deny_count == 0))
+		return MOSQ_ERR_SUCCESS;
+
+	/* Get client IP address */
+	client_address = mosquitto_client_address(ed->client);
+	if (client_address == NULL) {
+		mosquitto_log_printf(MOSQ_LOG_WARNING,
+			"subnet_acl: Could not get client address for user '%s', denying connection",
+			ed->username);
+		return MOSQ_ERR_AUTH;
+	}
+
+	/* Check deny list first - deny takes precedence */
+	if (user_acl->deny_count > 0) {
+		if (ip_in_subnet_list(client_address, user_acl->deny_subnets, user_acl->deny_count)) {
+			mosquitto_log_printf(MOSQ_LOG_NOTICE,
+				"subnet_acl: User '%s' from %s DENIED by deny rule",
+				ed->username, client_address);
+			return MOSQ_ERR_AUTH;
+		}
+	}
+
+	/* If there are allow rules, IP must match one of them */
+	if (user_acl->allow_count > 0) {
+		if (ip_in_subnet_list(client_address, user_acl->allow_subnets, user_acl->allow_count)) {
+			mosquitto_log_printf(MOSQ_LOG_DEBUG,
+				"subnet_acl: User '%s' from %s allowed by allow rule",
+				ed->username, client_address);
+			return MOSQ_ERR_SUCCESS;
+		} else {
+			mosquitto_log_printf(MOSQ_LOG_NOTICE,
+				"subnet_acl: User '%s' from %s DENIED (not in allowed subnets)",
+				ed->username, client_address);
+			return MOSQ_ERR_AUTH;
+		}
+	}
+
+	/* No subnet rules for this user - allow */
+	return MOSQ_ERR_SUCCESS;
+}
+
+#ifdef ENABLE_PAM_SUPPORT
+static int pam_conversation(int num_msg, const struct pam_message **msg, struct pam_response **resp, void *appdata_ptr)
+{
+	int i;
+	const char *pass = (const char *)appdata_ptr;
+
+	*resp = calloc(num_msg, sizeof(struct pam_response));
+	if (*resp == NULL) {
+		mosquitto_log_printf(MOSQ_LOG_ERR, "pam failed to allocate buffer for validation");
+		return PAM_BUF_ERR;
+	}
+
+	if (pass == NULL)
+		return PAM_SUCCESS;
+
+	for (i = 0; i < num_msg; ++i) {
+		if (msg[i]->msg_style == PAM_PROMPT_ECHO_OFF) {
+			(*resp)[i].resp = strdup(pass);
+			if ((*resp)[i].resp == NULL) {
+				for (int j = 0; j < i ; j++)
+					free((*resp)[j].resp);
+
+				free(*resp);
+				*resp = NULL;
+				mosquitto_log_printf(MOSQ_LOG_ERR, "pam failed in strdup");
+				return PAM_BUF_ERR;
+			}
+		}
+	}
+	return PAM_SUCCESS;
+}
+
+static int process_pam_auth_callback(struct mosquitto_evt_basic_auth *ed)
+{
+	struct pam_conv conv;
+	int retval;
+	pam_handle_t *pamh = NULL;
+
+	conv.conv = pam_conversation;
+	conv.appdata_ptr = (void *)ed->password;
+
+	retval = pam_start("mosquitto", ed->username, &conv, &pamh);
+	if (retval != PAM_SUCCESS) {
+		mosquitto_log_printf(MOSQ_LOG_ERR, "pam start failed: %s", pam_strerror(pamh, retval));
+		return MOSQ_ERR_AUTH;
+	}
+
+	retval = pam_authenticate(pamh, 0);
+	pam_end(pamh, retval);
+	if (retval == PAM_SUCCESS) {
+		mosquitto_log_printf(MOSQ_LOG_NOTICE, "pam user [%s] logged in", ed->username);
+		return MOSQ_ERR_SUCCESS;
+	}
+
+	mosquitto_log_printf(MOSQ_LOG_NOTICE, "pam user [%s] failed authentication, err [%s]", ed->username, pam_strerror(pamh, retval));
+	return MOSQ_ERR_AUTH;
+}
+#else
+static int process_shadow_auth_callback(struct mosquitto_evt_basic_auth *ed)
+{
+	struct spwd spbuf, *sp = NULL;
+	char buf[256];
+	struct crypt_data data;
+	char *hash;
+
+	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
+
+	if (sp == NULL || sp->sp_pwdp == NULL)
+		return MOSQ_ERR_AUTH;
+
+	/* Empty string as hash means password is not required */
+	if (sp->sp_pwdp[0] == 0)
+		return MOSQ_ERR_SUCCESS;
+
+	if (ed->password == NULL)
+		return MOSQ_ERR_AUTH;
+
+	memset(&data, 0, sizeof(data));
+	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
+
+	if (hash == NULL)
+		return MOSQ_ERR_AUTH;
+
+	if (strcmp(hash, sp->sp_pwdp) == 0)
+		return MOSQ_ERR_SUCCESS;
+
+	return MOSQ_ERR_AUTH;
+}
+#endif
+
+static int basic_auth_callback(int event, void *event_data, void *userdata)
+{
+	struct mosquitto_evt_basic_auth *ed = event_data;
+	plugin_data_t *pdata = userdata;
+	int auth_result;
+
+	/* Let other plugins or broker decide about anonymous login */
+	if (ed->username == NULL)
+		return MOSQ_ERR_PLUGIN_DEFER;
+
+	/* First check username/password authentication */
+#ifdef ENABLE_PAM_SUPPORT
+	auth_result = process_pam_auth_callback(ed);
+#else
+	auth_result = process_shadow_auth_callback(ed);
+#endif
+
+	/* If authentication failed, reject immediately */
+	if (auth_result != MOSQ_ERR_SUCCESS)
+		return auth_result;
+
+	/* Authentication succeeded, now check subnet restrictions */
+	return check_subnet_on_auth(pdata, ed);
+}
+
+int mosquitto_plugin_version(int supported_version_count,
+			     const int *supported_versions)
+{
+	return 5;
+}
+
+int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
+			  void **user_data,
+			  struct mosquitto_opt *opts, int opt_count)
+{
+	plugin_data_t *pdata;
+	const char *config_file = NULL;
+	int rc;
+
+	/* Find subnet config file option */
+	for (int i = 0; i < opt_count; i++) {
+		if (strcmp(opts[i].key, "subnet_acl_file") == 0) {
+			config_file = opts[i].value;
+			break;
+		}
+	}
+
+	pdata = calloc(1, sizeof(plugin_data_t));
+	if (pdata == NULL)
+		return MOSQ_ERR_NOMEM;
+
+	pdata->identifier = identifier;
+
+	/* Load subnet ACL configuration */
+	if (load_subnet_acl_config(pdata, config_file) != 0) {
+		free(pdata);
+		return MOSQ_ERR_UNKNOWN;
+	}
+
+	/* Register authentication callback only - subnet check is done during auth */
+	rc = mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
+	                                 basic_auth_callback, NULL, pdata);
+	if (rc != MOSQ_ERR_SUCCESS) {
+		mosquitto_log_printf(MOSQ_LOG_ERR,
+			"subnet_acl: Failed to register authentication callback");
+		free(pdata);
+		return rc;
+	}
+
+	mosquitto_log_printf(MOSQ_LOG_INFO,
+		"subnet_acl: Plugin initialized with %d user(s)", pdata->user_count);
+
+	/* Only assign user_data after all possible error paths */
+	*user_data = pdata;
+
+	return MOSQ_ERR_SUCCESS;
+}
+
+int mosquitto_plugin_cleanup(void *user_data,
+			     struct mosquitto_opt *opts, int opt_count)
+{
+	plugin_data_t *pdata = user_data;
+
+	if (pdata) {
+		mosquitto_callback_unregister(pdata->identifier, MOSQ_EVT_BASIC_AUTH,
+		                              basic_auth_callback, NULL);
+		free(pdata);
+	}
+
+	return MOSQ_ERR_SUCCESS;
+}

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -1,81 +0,0 @@
-/*
- * Copyright (c) 2022 Genexis B.V.
- *
- * This program and the accompanying materials are made available under the
- * terms of the Eclipse Public License 2.0 which is available at
- * https://www.eclipse.org/legal/epl-2.0/
- *
- * SPDX-License-Identifier: EPL-2.0
- *
- * Contributors:
- *   Erik Karlsson - initial implementation
- */
-
-#define _GNU_SOURCE
-#include <string.h>
-#include <shadow.h>
-#include <crypt.h>
-#include <mosquitto.h>
-#include <mosquitto_broker.h>
-#include <mosquitto_plugin.h>
-
-static int basic_auth_callback(int event, void *event_data, void *userdata)
-{
-	struct mosquitto_evt_basic_auth *ed = event_data;
-	struct spwd spbuf, *sp = NULL;
-	char buf[256];
-	struct crypt_data data;
-	char *hash;
-
-	/* Let other plugins or broker decide about anonymous login */
-	if (ed->username == NULL)
-		return MOSQ_ERR_PLUGIN_DEFER;
-
-	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
-
-	if (sp == NULL || sp->sp_pwdp == NULL)
-		return MOSQ_ERR_AUTH;
-
-	/* Empty string as hash means password is not required */
-	if (sp->sp_pwdp[0] == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	if (ed->password == NULL)
-		return MOSQ_ERR_AUTH;
-
-	memset(&data, 0, sizeof(data));
-	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
-
-	if (hash == NULL)
-		return MOSQ_ERR_AUTH;
-
-	if (strcmp(hash, sp->sp_pwdp) == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	return MOSQ_ERR_AUTH;
-}
-
-int mosquitto_plugin_version(int supported_version_count,
-			     const int *supported_versions)
-{
-	return 5;
-}
-
-int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
-			  void **user_data,
-			  struct mosquitto_opt *opts, int opt_count)
-{
-	*user_data = identifier;
-
-	return mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
-					   basic_auth_callback, NULL, NULL);
-}
-
-int mosquitto_plugin_cleanup(void *user_data,
-			     struct mosquitto_opt *opts, int opt_count)
-{
-	mosquitto_plugin_id_t *identifier = user_data;
-
-	return mosquitto_callback_unregister(identifier, MOSQ_EVT_BASIC_AUTH,
-					     basic_auth_callback, NULL);
-}

netmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmngr
-PKG_VERSION:=1.1.8
+PKG_VERSION:=1.2.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/netmngr.git
-PKG_SOURCE_VERSION:=6310f32b80f8abeccbf99ad55ce88792b19342d6
+PKG_SOURCE_VERSION:=1ece805d04b1d7843f57cae83f904268579ab4e6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

netmode/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmode
-PKG_VERSION:=1.1.5
+PKG_VERSION:=1.1.8
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
@@ -18,6 +18,7 @@ include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 define Package/netmode
   CATEGORY:=Utilities
   TITLE:=Network Modes and Utils
+  DEPENDS:=+dm-service
 endef
 
 define Package/netmode/description

netmode/files/datamodel.json

@@ -58,7 +58,7 @@
 							"name": "mode"
 						}
 					},
-					"linker_obj": "Device.{BBF_VENDOR_PREFIX}NetMode.SupportedModes.[Name==@key]."
+					"linker_obj": "Device.{BBF_VENDOR_PREFIX}NetMode.SupportedModes.*.Name"
 				}
 			]
 		},

netmode/files/etc/config/netmode

@@ -1,2 +1,2 @@
 config netmode global
-	option enabled 0
+	option enabled 1

netmode/files/etc/netmodes/routed-dhcp/scripts/10-routed-dhcp

@@ -17,6 +17,8 @@ l3_mcast_config() {
 l3_network_config() {
 	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
 
+	wandev="$(uci -q get network.WAN.ifname)"
+
 	# Configure L3 Network Mode
 	uci -q set network.lan=interface
 	uci -q set network.lan.device='br-lan'
@@ -36,11 +38,37 @@ l3_network_config() {
 	uci -q delete network.wan.disabled
 	uci -q delete network.wan.username
 	uci -q delete network.wan.password
+	uci -q delete network.wan.ipaddr
+	uci -q delete network.wan.gateway
+	uci -q delete network.wan.netmask
 
 	uci -q set network.wan6=interface
 	uci -q set network.wan6.proto='dhcpv6'
 	uci -q delete network.wan6.disabled
 
+	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
+		uci -q set network.vlan_${NETMODE_vlanid}=device
+		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
+		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
+		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
+		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
+
+		wandev="$wandev.$NETMODE_vlanid"
+	fi
+
+	uci -q set network.wan.device="$wandev"
+	uci -q set network.wan6.device="$wandev"
+
+	uci -q set network.WAN.mtu="$NETMODE_mtu"
+
+	uci -q delete network.wan.dns
+	if [ -n "$NETMODE_dns_servers" ]; then
+		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
+		for server in $dns_servers; do
+		    uci -q add_list network.wan.dns=$server
+		done
+	fi
+
 	uci -q delete network.br_lan.ports
 	uci -q set network.br_lan.bridge_empty='1'
 
@@ -61,12 +89,6 @@ l3_network_config() {
 			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
 		fi
 		json_select ..
-		json_select wan 2>/dev/null
-		json_get_var device device
-		if [ -n "$device" ]; then
-			uci -q set network.wan.device="$device"
-			uci -q set network.wan6.device="$device"
-		fi
 		json_cleanup
 	fi
 

netmode/files/etc/netmodes/routed-pppoe/scripts/10-routed-pppoe

@@ -17,6 +17,8 @@ l3_mcast_config() {
 l3_network_pppoe_config() {
 	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
 
+	wandev="$(uci -q get network.WAN.ifname)"
+
 	# Configure L3 Network Mode
 	uci -q set network.lan=interface
 	uci -q set network.lan.device='br-lan'
@@ -36,9 +38,35 @@ l3_network_pppoe_config() {
 	uci -q set network.wan.username="$NETMODE_username"
 	uci -q set network.wan.password="$NETMODE_password"
 	uci -q delete network.wan.disabled
+	uci -q delete network.wan.ipaddr
+	uci -q delete network.wan.gateway
+	uci -q delete network.wan.netmask
 
 	uci -q set network.wan6.disabled='1'
 
+	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
+		uci -q set network.vlan_${NETMODE_vlanid}=device
+		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
+		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
+		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
+		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
+
+		wandev="$wandev.$NETMODE_vlanid"
+	fi
+
+	uci -q set network.wan.device="$wandev"
+	uci -q set network.wan6.device="$wandev"
+
+	uci -q set network.WAN.mtu="$NETMODE_mtu"
+
+	uci -q delete network.wan.dns
+	if [ -n "$NETMODE_dns_servers" ]; then
+		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
+		for server in $dns_servers; do
+		    uci -q add_list network.wan.dns=$server
+		done
+	fi
+
 	uci -q delete network.br_lan.ports
 	uci -q set network.br_lan.bridge_empty='1'
 
@@ -59,12 +87,6 @@ l3_network_pppoe_config() {
 			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
 		fi
 		json_select ..
-		json_select wan 2>/dev/null
-		json_get_var device device
-		if [ -n "$device" ]; then
-			uci -q set network.wan.device="$device"
-			uci -q set network.wan6.device="$device"
-		fi
 		json_cleanup
 	fi
 

netmode/files/etc/netmodes/routed-static/scripts/10-routed-static

@@ -0,0 +1,129 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+source "/etc/device_info"
+
+l3_mcast_config() {
+	# configure L3 mcast config
+	logger -s -p user.info -t "netmode" "Generating L3 mcast configuration"
+
+	rm -f /etc/config/mcast
+	sh /rom/etc/uci-defaults/61-mcast_config_generate
+	uci -q commit mcast
+}
+
+l3_network_config() {
+	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
+
+	wandev="$(uci -q get network.WAN.ifname)"
+
+	# Configure L3 Network Mode
+	uci -q set network.lan=interface
+	uci -q set network.lan.device='br-lan'
+	uci -q set network.lan.proto='static'
+	uci -q set network.lan.ipaddr='192.168.1.1'
+	uci -q set network.lan.netmask='255.255.255.0'
+	uci -q set network.lan.ip6assign='60'
+	uci -q delete network.lan.vendorid
+	uci -q delete network.lan.clientid
+	uci -q delete network.lan.reqopts
+	uci -q delete network.lan.sendopts
+
+	uci -q delete network.lan6	
+
+	uci -q set network.wan=interface
+	uci -q set network.wan.device="$wandev"
+	uci -q set network.wan.proto='static'
+	uci -q set network.wan.ipaddr="$NETMODE_ipaddr"
+	uci -q set network.wan.gateway="$NETMODE_gateway"
+	uci -q set network.wan.netmask="$NETMODE_netmask"
+	uci -q delete network.wan.disabled
+	uci -q delete network.wan.username
+	uci -q delete network.wan.password
+
+	uci -q set network.wan6.disabled='1'
+
+	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
+		uci -q set network.vlan_${NETMODE_vlanid}=device
+		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
+		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
+		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
+		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
+
+		wandev="$wandev.$NETMODE_vlanid"
+	fi
+
+	uci -q set network.wan.device="$wandev"
+	uci -q set network.wan6.device="$wandev"
+
+	uci -q set network.WAN.mtu="$NETMODE_mtu"
+
+	uci -q delete network.wan.dns
+	if [ -n "$NETMODE_dns_servers" ]; then
+		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
+		for server in $dns_servers; do
+		    uci -q add_list network.wan.dns=$server
+		done
+	fi
+
+	uci -q delete network.br_lan.ports
+	uci -q set network.br_lan.bridge_empty='1'
+
+	add_port_to_br_lan() {
+		port="$1"
+		[ -n "$port" -a -d /sys/class/net/$port ] || continue
+		uci add_list network.br_lan.ports="$port"
+	}
+
+	if [ -f /etc/board.json ]; then
+		json_load_file /etc/board.json
+		json_select network
+		json_select lan
+		if json_is_a ports array; then
+			json_for_each_item add_port_to_br_lan ports
+		else
+			json_get_var device device
+			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
+		fi
+		json_select ..
+		json_cleanup
+	fi
+
+	uci -q commit network
+
+	# Enable DHCP Server
+	uci -q set dhcp.lan.ignore=0
+	uci -q set dhcp.wan.ignore=1
+	uci -q commit dhcp
+	/etc/init.d/odhcpd enable
+
+	# Enable SSDPD
+	uci -q set ssdpd.ssdp.enabled="1"
+	uci -q commit ssdpd
+
+	# Update CWMP Agent WAN Interface
+	uci -q set cwmp.cpe.default_wan_interface="wan"
+	uci -q commit cwmp
+
+	# Update gateway WAN Interface
+	uci -q set gateway.global.wan_interface="wan"
+	uci -q commit gateway
+
+	# Enable firewall
+	uci -q set firewall.globals.enabled="1"
+	uci -q commit firewall
+}
+
+l3_network_config
+l3_mcast_config
+
+# If device is already boot-up, assume netmode changed during runtime
+if [ -f /var/run/boot_complete ]; then
+	/etc/init.d/odhcpd restart 2>/dev/null
+	for config in network dhcp ssdpd cwmp gateway firewall mcast; do
+		ubus call uci commit "{\"config\":\"$config\"}"
+		sleep 1
+	done
+fi

netmode/files/etc/netmodes/supported_modes.json

@@ -3,25 +3,96 @@
   "supported_modes": [
     {
       "name": "routed-dhcp",
-      "description": "WAN with DHCP proto (Layer 3)"
+      "description": "DHCP",
+      "supported_args": [
+        {
+          "name": "vlanid",
+          "description": "VLAN ID",
+          "required": false,
+          "type": "integer"
+        },
+        {
+          "name": "dns_servers",
+          "description": "DNS Servers",
+          "required": false,
+          "type": "string"
+        }
+      ]
     },
     {
       "name": "routed-pppoe",
-      "description": "WAN with PPPoE (Layer 3)",
+      "description": "PPPoE",
       "supported_args": [
         {
           "name": "username",
-          "description": "PPPoE username",
+          "description": "PPPoE Username",
           "required": true,
-	  "type": "string",
+          "type": "string",
           "#value": "TestUser"
         },
         {
           "name": "password",
-          "description": "PPPoE password",
+          "description": "PPPoE Password",
           "required": true,
-	  "type": "string",
+          "type": "string",
           "#value": "TestPassword"
+        },
+        {
+          "name": "vlanid",
+          "description": "VLAN ID",
+          "required": false,
+          "type": "integer"
+        },
+        {
+          "name": "mtu",
+          "description": "MTU",
+          "required": false,
+          "type": "integer"
+        },
+        {
+          "name": "dns_servers",
+          "description": "DNS Servers",
+          "required": false,
+          "type": "string"
+        }
+      ]
+    },
+    {
+      "name": "routed-static",
+      "description": "Static",
+      "supported_args": [
+        {
+          "name": "ipaddr",
+          "description": "IP Address",
+          "required": true,
+          "type": "string",
+          "#value": "93.21.0.104"
+        },
+        {
+          "name": "netmask",
+          "description": "Subnet Mask",
+          "required": true,
+          "type": "string",
+          "#value": "255.255.255.0"
+        },
+        {
+          "name": "gateway",
+          "description": "Default Gateway",
+          "required": true,
+          "type": "string",
+          "#value": "93.21.0.1"
+        },
+        {
+          "name": "vlanid",
+          "description": "VLAN ID",
+          "required": false,
+          "type": "integer"
+        },
+        {
+          "name": "dns_servers",
+          "description": "DNS Servers",
+          "required": false,
+          "type": "string"
         }
       ]
     }

netmode/files/etc/uci-defaults/40_netmode_set_default_netmode

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+enabled="$(uci -q get netmode.global.enabled)"
+[ "$enabled" == "1" ] || exit 0
+
+mode="$(uci -q get netmode.global.mode)"
+wanproto=$(uci -q get network.wan.proto)
+
+if [ -n "$mode" ]; then
+	# check if wanproto and mode aligned
+	if [ "${mode}" = "routed-${wanproto}" ]; then
+		exit 0
+	fi
+fi
+
+[ -f /etc/netmodes/supported_modes.json ] || exit 0
+
+# NetMode is enabled without a Mode being set
+# Figure out the current mode from network config
+curmode=""
+case "$wanproto" in
+	dhcp) curmode="routed-dhcp" ;;
+	pppoe) curmode="routed-pppoe" ;;
+	static) curmode="routed-static" ;;
+esac
+
+found=0
+for md in $(jsonfilter -i /etc/netmodes/supported_modes.json -e "@.supported_modes.*.name"); do
+	[ "$md" == "$curmode" ] && found=1
+done
+
+if [ $found -eq 1 ]; then
+	uci -q set netmode.global.mode="$curmode"
+	echo "$curmode" > /etc/netmodes/.last_mode
+fi

netmode/files/lib/netmode/post/datamodel_init.sh

@@ -19,7 +19,3 @@ fi
 if [ -x "/etc/init.d/bbfdmd" ]; then
 	/etc/init.d/bbfdmd restart
 fi
-
-if [ -x "/etc/init.d/obuspa" ]; then
-	/etc/init.d/obuspa restart
-fi

netmode/files/lib/upgrade/keep.d/netmode

@@ -0,0 +1 @@
+/etc/netmodes/.last_mode

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=10.0.0.16
+PKG_VERSION:=10.0.7.7
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/obuspa.git
-PKG_SOURCE_VERSION:=479ffb3582aa245a84829502d9412ca2539eefca
+PKG_SOURCE_VERSION:=f3b5b79476adadc55830de9466361c0eeced473e
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -32,8 +32,9 @@ define Package/obuspa
   SUBMENU:=TRx69
   TITLE:=USP agent
   MENU:=1
-  DEPENDS:=+libopenssl +libuci +libblobmsg-json +libcurl +libsqlite3 +libubox +libubus +libmosquitto-ssl +libwebsockets-openssl +ca-certificates \
-		+OBUSPA_LOCAL_MQTT_LISTENER:mosquitto-ssl +libjson-c
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libmosquitto-ssl +libwebsockets-openssl
+  DEPENDS+=+libjson-c +libubox +libubus +libuci +libblobmsg-json
+  DEPENDS+=+ca-certificates +OBUSPA_LOCAL_MQTT_LISTENER:mosquitto-ssl
   DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
 endef
 

obuspa/files/etc/init.d/obuspa

@@ -6,19 +6,18 @@ USE_PROCD=1
 
 PROG=/usr/sbin/obuspa
 CONFIGURATION=obuspa
-
 ENV_PROFILE="/root/.profile"
 KEEP_FILE="/lib/upgrade/keep.d/obuspa"
 
 RESET_FILE="/tmp/obuspa/fw_defaults"
-SQL_DB_FILE="/tmp/obuspa/usp.db"
-DB_DUMP="/tmp/obuspa/usp.dump_$(date +%s)"
+
+OBUSPA_BOOT_MARKER="/etc/obuspa/.boot"
 
 BASEPATH=""
 INSTANCE_COUNT=0
+CLIENT_ID_PREFIX=""
 
 . /lib/functions/network.sh
-. /usr/share/libubox/jshn.sh
 . /etc/obuspa/usp_utils.sh
 
 global_init()
@@ -30,6 +29,7 @@ global_init()
 log()
 {
 	echo "$*"|logger -t obuspa.init -p debug
+	echo "$*" >/dev/console
 }
 
 db_set_reset_file()
@@ -47,37 +47,9 @@ db_set_reset_file()
 	fi
 }
 
-db_set_sql()
-{
-	local param value
-
-	param="${1}"
-	shift
-	value="$*"
-
-	if [ -n "${param}" ] && [ -n "${value}" ]; then
-		if grep -q "${param} " ${DB_DUMP}; then
-			value="${value//\//\\/}"
-			sed -i "s/${param} .*/${param} \"${value}\"/g" ${DB_DUMP}
-		else
-			echo "${param} \"${value}\"" >> ${DB_DUMP}
-		fi
-	fi
-}
-
 db_set()
 {
-	# if sql db dump file present, update it
-	if [ -f "${DB_DUMP}" ]; then
-		db_set_sql "$@"
-	else
-		db_set_reset_file "$@"
-	fi
-}
-
-dump_db()
-{
-	${PROG} -v0 -f ${SQL_DB_FILE} -c show database |grep "^Internal.\|^Device."|sed '{s/=> /"/g;s/$/"/g}' | sort  > ${DB_DUMP}
+	db_set_reset_file "$@"
 }
 
 # if db present then check if it matches with existing instances
@@ -92,21 +64,6 @@ get_base_path()
 	path=""
 	count=0
 
-	if [ -f "${DB_DUMP}" ]; then
-		path=$(grep -E "${refpath}\d+.Alias \"${value}\"" ${DB_DUMP})
-		path=${path%.*}
-		if [ -z "${path}" ]; then
-			path=$(grep -oE "${refpath}\d+" ${DB_DUMP} |sort -r|head -n 1)
-			if [ -n "${path}" ]; then
-				count=${path##*.}
-				count=$(( count + 1 ))
-			else
-				count=1
-			fi
-			path="${refpath}${count}"
-		fi
-	fi
-
 	if [ -z "${path}" ]; then
 		INSTANCE_COUNT=$(( INSTANCE_COUNT + 1 ))
 		path="${refpath}${INSTANCE_COUNT}"
@@ -122,9 +79,7 @@ get_refrence_path()
 	value="${2}"
 	path=""
 
-	if [ -f "${DB_DUMP}" ]; then
-		path=$(grep -E "${dmref}\d+.Alias " ${DB_DUMP}|grep -w "${value}")
-	elif [ -f "${RESET_FILE}" ]; then
+	if [ -f "${RESET_FILE}" ]; then
 		path=$(grep -E "${dmref}\d+.Alias " ${RESET_FILE}|grep -w "${value}")
 	fi
 	path=${path%.*}
@@ -136,7 +91,7 @@ update_keep()
 	file=${1}
 
 	if [ -z "${file}" ]; then
-		return;
+		return 0
 	fi
 
 	if [ ! -f "${KEEP_FILE}" ]; then
@@ -263,7 +218,7 @@ configure_localagent()
 
 	validate_localagent_section "${1}" || {
 		log "Validation of localagent section failed"
-		return 0;
+		return 0
 	}
 
 	db_set Device.LocalAgent.EndpointID "${EndpointID}"
@@ -271,7 +226,7 @@ configure_localagent()
 
 update_reset_reason()
 {
-	[ -f "/tmp/reset_reason" ] || return 0;
+	[ -f "/tmp/reset_reason" ] || return 0
 
 	if grep -qwi "defaultreset" /tmp/reset_reason; then
 		db_set Internal.Reboot.Cause "FactoryReset"
@@ -310,10 +265,6 @@ get_role_index()
 		val="$(grep "Device.LocalAgent.ControllerTrust.Role.\d.Name" ${CTRUST_RESET_FILE} |grep $name)"
 		val="$(echo ${val/.Name /,}|cut -d, -f 1)"
 		echo "$val"
-	elif [ -f "${DB_DUMP}" ]; then
-		val="$(grep "Device.LocalAgent.ControllerTrust.Role.\d.Name" ${DB_DUMP} |grep $name)"
-		val="$(echo ${val/.Name /,}|cut -d, -f 1)"
-		echo "$val"
 	else
 		log "Not able to get role ${name}, use Untrusted role"
 		echo "${drole}"
@@ -331,19 +282,19 @@ configure_controller()
 	sec="${1}"
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
-		return 1;
+		return 1
 	}
 
 	sec="${sec/controller_/cpe-}"
 	get_base_path "Device.LocalAgent.Controller." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
 	fi
 
 	if [ -z "${Protocol}" ]; then
 		log "controller:: Protocol cannot be empty"
-		return 1;
+		return 1
 	fi
 
 	dm_ref=""
@@ -439,14 +390,14 @@ configure_subscription()
 	sec="${1}"
 	validate_subscription_section "${1}" || {
 		log "Validation of subscription section failed"
-		return 1;
+		return 1
 	}
 
 	sec="${sec/sub_/cpe-}"
 	get_base_path "Device.LocalAgent.Subscription." "sub_${1}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
 	fi
 
 	if [ -n "${controller}" ]; then
@@ -483,12 +434,12 @@ configure_challenges()
 	get_base_path "Device.LocalAgent.ControllerTrust.Challenge." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
 	fi
 
 	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
-		log "Either role_name or Role must defined for a challenge";
-		return 1;
+		log "Either role_name or Role must defined for a challenge"
+		return 1
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -515,18 +466,18 @@ configure_mtp() {
 	sec="${1}"
 	validate_mtp_section "${1}" || {
 		log "Validation of mtp section failed"
-		return 1;
+		return 1
 	}
 	sec="${sec/mtp_/cpe-}"
 	get_base_path "Device.LocalAgent.MTP." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
 	fi
 
 	if [ -z "${Protocol}" ]; then
 		log "Protocol not defined for the mtp[${1}] section"
-		return 1;
+		return 1
 	fi
 
 	dm_ref=""
@@ -584,14 +535,14 @@ configure_stomp_connection() {
 	sec="${1}"
 	validate_stomp_connection_section "${1}" || {
 		log "Validation of stomp section failed"
-		return 1;
+		return 1
 	}
 
 	sec="${sec/stomp_/cpe-}"
 	get_base_path "Device.STOMP.Connection." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -614,14 +565,18 @@ configure_mqtt_client() {
 	sec="${1}"
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
-		return 1;
+		return 1
 	}
 
 	sec="${sec/mqtt_/cpe-}"
 	get_base_path "Device.MQTT.Client." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1;
+		return 1
+	fi
+
+	if [ -z "${ClientID}" ]; then
+		ClientID="${CLIENT_ID_PREFIX}-${sec}"
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -648,6 +603,9 @@ configure_obuspa() {
 	fi
 
 	if [ -n "${log_level}" ]; then
+		if [ "${log_level}" -gt "4" ]; then
+			log_level="4"
+		fi
 		procd_append_param command -v "${log_level}"
 	fi
 
@@ -676,13 +634,13 @@ configure_obuspa() {
 
 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f "${SQL_DB_FILE}"
+		procd_append_param command -f "${db_file}"
+		if [ -f "${db_file}-journal" ]; then
+			log "SQL Journal detected ..."
+		fi
 	fi
 
 	if [ -f "${RESET_FILE}" ]; then
-		if [ -f "${SQL_DB_FILE}" ]; then
-			mv ${SQL_DB_FILE} ${SQL_DB_FILE}.old
-		fi
 		procd_append_param command -r ${RESET_FILE}
 	fi
 
@@ -701,301 +659,34 @@ configure_obuspa() {
 	fi
 }
 
-get_instances_from_db_dump()
-{
-	local obj inst
-
-	obj="${1}\d+"
-	if [ ! -f "${DB_DUMP}" ]; then
-		echo ""
-		return 0;
-	fi
-
-	inst="$(grep -oE "${obj}" "${DB_DUMP}"|uniq)"
-	echo "$inst"
-}
-
-get_param_value_from_dump()
-{
-	local param value
-
-	param="${1}"
-
-	if [ -z "${param}" ] || [ ! -f "${DB_DUMP}" ]; then
-		log "error getting param"
-		echo ""
-		return 0
-	fi
-
-	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $2}')"
-
-	echo "${value//\"/}"
-}
-
-update_uci_sec()
-{
-	local sec tmp
-
-	sec="${1}"
-	stype="${2}"
-	if [ -z "$sec" ] || [ -z "$stype" ]; then
-		log "No section name, error"
-		return 0
-	fi
-
-	tmp="$(uci_get obuspa "${sec}")"
-	if [ "$tmp" != "$stype" ]; then
-		uci_add obuspa "${stype}" "${sec}"
-	fi
-}
-
-sync_db_controller()
-{
-	local cntrs copts sec pvalue protocol
-
-	copts="Enable EndpointID PeriodicNotifInterval"
-	popts="Destination Topic Host Port Path EnableEncryption"
-
-	cntrs="$(get_instances_from_db_dump Device.LocalAgent.Controller.)"
-	for cntr in $cntrs; do
-		sec="$(get_param_value_from_dump "${cntr}".Alias)"
-		sec="${sec/cpe-/controller_}"
-		sec="${sec/-/_}"
-
-		update_uci_sec "${sec}" controller
-		for param in ${copts}; do
-			pvalue="$(get_param_value_from_dump "${cntr}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-		uci_set obuspa "${sec}" "_sync" "1"
-
-		protocol="$(get_param_value_from_dump "${cntr}".MTP.1.Protocol)"
-		if [ -z "${protocol}" ]; then
-			break;
-		fi
-		uci_set obuspa "${sec}" "Protocol" "${protocol}"
-		for param in ${popts}; do
-			pvalue="$(get_param_value_from_dump "${cntr}".MTP.1."${protocol}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-	done
-}
-
-sync_db_localagent_mtp()
-{
-	local mtps opts popts sec pvalue protocol
-
-	opts="Enable"
-	popts="ResponseTopicConfigured Destination Port Path EnableEncryption PublishQoS"
-
-	mtps="$(get_instances_from_db_dump Device.LocalAgent.MTP.)"
-	for inst in $mtps; do
-		sec="$(get_param_value_from_dump "${inst}".Alias)"
-		sec="${sec/cpe-/mtp_}"
-		sec="${sec/-/_}"
-		update_uci_sec "${sec}" mtp
-		for param in ${opts}; do
-			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-		uci_set obuspa "${sec}" "_sync" "1"
-
-		protocol="$(get_param_value_from_dump "${inst}".Protocol)"
-		if [ -z "${protocol}" ]; then
-			break;
-		fi
-		uci_set obuspa "${sec}" "Protocol" "${protocol}"
-		for param in ${popts}; do
-			pvalue="$(get_param_value_from_dump "${inst}"."${protocol}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-	done
-}
-
-
-sync_db_mqtt_client()
-{
-	local mtps copts sec pvalue protocol
-
-	opts="Enable BrokerAddress BrokerPort Username ProtocolVersion TransportProtocol ClientID"
-
-	mtps="$(get_instances_from_db_dump Device.MQTT.Client.)"
-	for inst in $mtps; do
-		sec="$(get_param_value_from_dump "${inst}".Alias)"
-		sec="${sec/cpe-/mqtt_}"
-		sec="${sec/-/_}"
-		update_uci_sec "${sec}" mqtt
-		for param in ${opts}; do
-			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-		uci_set obuspa "${sec}" "_sync" "1"
-	done
-}
-
-sync_db_stomp_connection()
-{
-	local mtps copts sec pvalue protocol
-
-	opts="Enable Host Port Username EnableEncryption EnableHeartbeats VirtualHost"
-
-	mtps="$(get_instances_from_db_dump Device.STOMP.Connection.)"
-	for inst in $mtps; do
-		sec="$(get_param_value_from_dump "${inst}".Alias)"
-		sec="${sec/cpe-/stomp_}"
-		sec="${sec/-/_}"
-		update_uci_sec "${sec}" stomp
-		for param in ${opts}; do
-			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
-			uci_set obuspa "${sec}" "${param}" "${pvalue}"
-		done
-		uci_set obuspa "${sec}" "_sync" "1"
-	done
-}
-
-sync_update_sec()
-{
-	local _sync
-	config_get _sync "${1}" _sync ""
-	if [ -z "${_sync}" ]; then
-		uci_remove obuspa "${1}"
-		log "Deleting obuspa.${1} section ..."
-	else
-		uci_remove obuspa "${1}" _sync
-	fi
-}
-
-sync_uci_with_db()
-{
-	if [ ! -f "${DB_DUMP}" ]; then
-		return 0;
-	fi
-
-	config_load obuspa
-	sync_db_controller
-	sync_db_localagent_mtp
-	sync_db_mqtt_client
-	sync_db_stomp_connection
-	uci_commit obuspa
-
-	config_load obuspa
-	config_foreach sync_update_sec controller
-	config_foreach sync_update_sec mtp
-	config_foreach sync_update_sec mqtt
-	config_foreach sync_update_sec stomp
-	uci_commit obuspa
-}
-
-delete_sql_db_entry_with_pattern()
-{
-	local params pattern
-
-	pattern="${1}"
-	if [ ! -f "${DB_DUMP}" ]; then
-		return 0;
-	fi
-
-	if [ "${#pattern}" -lt 7 ]; then
-		return 0;
-	fi
-
-	#log "Deleting with pattern [${pattern}] from ${DB_DUMP}"
-	sed -i "/${pattern}/d" ${DB_DUMP}
-}
-
-check_n_delete_db()
-{
-	local sec t r path
-
-	sec="${1}"
-	if uci -q get obuspa."${sec}" >/dev/null 2>&1; then
-		return 0
-	fi
-
-	t="${2}"
-	r="${3}"
-	sec="${sec/${t}_/cpe-}"
-
-	path=$(grep -E "${r}\d+.Alias \"${sec}\"" ${DB_DUMP})
-	path=${path%.*}
-
-	delete_sql_db_entry_with_pattern "${path}"
-}
-
-workaround_remove_download_pattern()
-{
-	local inst
-
-	inst="$(cat ${DB_DUMP} |grep -E "Device.DeviceInfo.FirmwareImage.\d.Download()"|grep -oE "Device.LocalAgent.Request.\d.")"
-
-	if [ -n "${inst}" ]; then
-		log "Workaround to remove the old download Request [$inst]"
-		delete_sql_db_entry_with_pattern "${inst}"
-	fi
-}
-
-reverse_update_db_with_uci()
-{
-	if [ ! -f "${DB_DUMP}" ]; then
-		return 0;
-	fi
-
-	export UCI_CONFIG_DIR="/tmp/obuspa"
-	config_load obuspa
-	config_foreach check_n_delete_db controller controller "Device.LocalAgent.Controller."
-	config_foreach check_n_delete_db mtp mtp "Device.LocalAgent.MTP."
-	config_foreach check_n_delete_db mqtt mqtt "Device.MQTT.Client."
-	config_foreach check_n_delete_db stomp stomp "Device.STOMP.Connection."
-	unset UCI_CONFIG_DIR
-}
-
 # Create factory reset file
 db_init()
 {
-	local reason role_file
+	local reason
 
 	reason="${1}"
-	mkdir -p /tmp/obuspa/
-
-	# Load configuration
-	config_load $CONFIGURATION
-	config_get SQL_DB_FILE global db_file "/tmp/obuspa/usp.db"
-	config_get role_file global role_file ""
-
-	if [ -f "${SQL_DB_FILE}.old" ] && [ ! -f "${SQL_DB_FILE}" ]; then
-		log "Copying old db, since new db not present ..."
-		mv ${SQL_DB_FILE}.old ${SQL_DB_FILE}
+	# remove usp.db, in case of reload
+	if [ -f "${OBUSPA_BOOT_MARKER}" ] && [ "${reason}" = "update" ]; then
+		log "Deleting ${OBUSPA_BOOT_MARKER} in order to enforce values from UCI..."
+		rm -f "${OBUSPA_BOOT_MARKER}"
 	fi
 
-	# Dump datamodel parameters from DB
-	if [ -f "${SQL_DB_FILE}" ]; then
-		dump_db
-	fi
-
-	# In case of Reboot or service restart update the uci
-        # from usp.db file
-	if [ -f "${DB_DUMP}" ] && [ "${reason}" != "update" ]; then
-		# Only do this if db have reasonable data
-		val="$(awk 'END{print NR}' ${DB_DUMP})"
-		if [ "$val" -gt 15 ]; then
-			log "Syncing obuspa uci with usp.db ...."
-			sync_uci_with_db
-		fi
-	fi
-
-	# remove entries from db if deleted from uci, only in case of reload
-	if [ -f "${DB_DUMP}" ] && [ "${reason}" = "update" ] && [ -f "/tmp/obuspa/obuspa" ]; then
-		log "Deleting entries from usp.db if uci not present ...."
-		reverse_update_db_with_uci
+	if [ -f "${OBUSPA_BOOT_MARKER}" ]; then
+		return 0
 	fi
 
 	# Remove reset file if present
-	[ -f "${RESET_FILE}" ] && mv ${RESET_FILE} ${RESET_FILE}.old
+	[ -f "${RESET_FILE}" ] && rm ${RESET_FILE}
+
+	CLIENT_ID_PREFIX="$(db -q get device.deviceinfo.ManufacturerOUI)"
+	CLIENT_ID_PREFIX="${CLIENT_ID_PREFIX}-$(db -q get device.deviceinfo.SerialNumber)"
+	CLIENT_ID_PREFIX="${CLIENT_ID_PREFIX//+/%2b}"
 
 	#log "Create reset file ...."
 	config_load $CONFIGURATION
 	config_get dualstack_pref global dualstack_pref "IPv6"
 
+	log "Enforcing UCI values, no boot marker found."
 	global_init
 	config_foreach configure_localagent localagent
 	global_init
@@ -1011,21 +702,12 @@ db_init()
 	global_init
 	config_foreach configure_challenges challenge
 
+	# enforce ctrust only on upgrades, not on reloads
+	if [ -f "${CTRUST_RESET_FILE}" ] && [ -z "${reason}" ]; then
+		cat ${CTRUST_RESET_FILE} >> ${RESET_FILE}
+	fi
 	update_reset_reason
 	update_dual_stack_pref "${dualstack_pref}"
-
-	uci_commit ${CONFIGURATION}
-
-	cp /etc/config/obuspa /tmp/obuspa/
-	if [ -f "${DB_DUMP}" ]; then
-		workaround_remove_download_pattern
-		mv ${DB_DUMP} ${RESET_FILE}
-	fi
-
-	if [ -f "${CTRUST_RESET_FILE}" ]; then
-		cat ${CTRUST_RESET_FILE} >> ${RESET_FILE}
-		rm ${CTRUST_RESET_FILE}
-	fi
 }
 
 start_service() {
@@ -1033,25 +715,22 @@ start_service() {
 
 	mkdir -p /tmp/obuspa/
 	config_load obuspa
-	config_get_bool enabled global enabled 0
+	config_get_bool enabled global enabled 1
 
 	procd_open_instance ${CONFIGURATION}
 	if [ "${enabled}" -eq 1 ]; then
-		db_init "${1}"
 		procd_set_param command ${PROG}
+		db_init "${1}"
 		configure_obuspa
 		procd_set_param respawn \
 			"${respawn_threshold:-10}" \
 			"${respawn_timeout:-10}" "${respawn_retry:-5}"
-		#procd_set_param limits core="unlimited"
 	fi
 	procd_close_instance ${CONFIGURATION}
 }
 
 stop_service() {
-	if command -v timeout >/dev/null 2>&1; then
-		timeout 5 ${PROG} -c stop
-	fi
+	${PROG} -c stop
 }
 
 reload_service() {
@@ -1060,5 +739,6 @@ reload_service() {
 }
 
 service_triggers() {
+	export PROCD_RELOAD_DELAY=3000
 	procd_add_reload_trigger "obuspa"
 }

obuspa/files/etc/obuspa/usp_utils.sh

@@ -1,10 +1,12 @@
 #!/bin/sh
 
-CTRUST_RESET_FILE="/tmp/obuspa/ctrust_reset"
+CTRUST_RESET_FILE="/etc/obuspa/ctrust_reset"
 VENDOR_PREFIX_FILE="/etc/obuspa/vendor_prefix"
 FW_DEFAULT_ROLE_DIR="/etc/users/roles"
 SECURE_ROLES=""
 
+CTRUST_RESET_FILE_TEMP="/tmp/obuspa/ctrust_reset"
+
 mkdir -p /tmp/obuspa/
 
 # include jshn.sh
@@ -23,9 +25,9 @@ db_add()
 	value="$*"
 
 	if [ -n "${param}" ] && [ -n "${value}" ]; then
-		echo "${param} \"${value}\"">>${CTRUST_RESET_FILE}
+		echo "${param} \"${value}\"">>${CTRUST_RESET_FILE_TEMP}
 	else
-		echo >>${CTRUST_RESET_FILE}
+		echo >>${CTRUST_RESET_FILE_TEMP}
 	fi
 }
 
@@ -252,7 +254,10 @@ configure_ctrust_role()
 	if [ -n "${SECURE_ROLES}" ]; then
 		db_add Device.LocalAgent.ControllerTrust.SecuredRoles "${SECURE_ROLES}"
 	fi
+
+	if [ -f "${CTRUST_RESET_FILE_TEMP}" ]; then
+		mv -f "${CTRUST_RESET_FILE_TEMP}" "${CTRUST_RESET_FILE}"
+	fi
 }
 
 # configure_ctrust_role "${@}"
-

obuspa/files/etc/uci-defaults/61-override-ct-roles

@@ -4,5 +4,3 @@
 . /etc/obuspa/usp_utils.sh
 
 configure_ctrust_role
-
-exit 0

obuspa/files/etc/uci-defaults/93-obuspa_mdns_adv

@@ -53,13 +53,7 @@ add_mdns_advertise() {
 	json_dump > /etc/umdns/obuspa_mdns.json
 }
 
-config_load obuspa
-config_get_bool enable_obuspa global enabled 1
-
-if [ "${enable_obuspa}" -eq 1 ]; then
-	role="$(get_device_role)"
-
-	if [ "${role}" == "gateway" ]; then
-		add_mdns_advertise
-	fi
+role="$(get_device_role)"
+if [ "${role}" == "gateway" ]; then
+	add_mdns_advertise
 fi

obuspa/files/etc/uci-defaults/obuspa-set-dhcp-option

@@ -19,19 +19,11 @@ get_access_role()
 
 configure_dhcp_options() {
 	local enabled inerface discovery
-	config_load obuspa
+
 	config_get_bool enabled global enabled 1
 	config_get interface global interface
 	config_get_bool discovery global dhcp_discovery 1
 
-	if [ "${enabled}" -eq 0 ]; then
-		return 0
-	fi
-
-	if [ "${discovery}" -eq 0 ]; then
-		return 0
-	fi
-
 	if [ -z "${interface}" ]; then
 		role="$(get_access_role)"
 
@@ -66,12 +58,12 @@ configure_dhcp_options() {
 
 	if [ "${proto}" = "dhcp" ]; then
 		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
+			[ -n "${reqopts}" ] && newreqopts="$reqopts 125" || newreqopts="125"
 			uci -q set network."${interface}".reqopts="$newreqopts"
 		fi
 
 		if [ ${send124_present} -eq 0 ]; then
-			newsendopts="${sendopts} 124:00:00:0D:E9:04:03:75:73:70"
+			[ -n "${sendopts}" ] && newsendopts="${sendopts} 124:00:00:0D:E9:04:03:75:73:70" ||  newsendopts="124:00:00:0D:E9:04:03:75:73:70"
 			uci -q set network."${interface}".sendopts="$newsendopts"
 		fi
 	fi

obuspa/files/etc/udhcpc.user.d/udhcpc_obuspa_opt125.user

@@ -8,6 +8,7 @@ RETRY_MIN_INTERVAL="5"
 RETRY_INTERVAL_MUL="2000"
 ENDPOINT_ID=""
 CONTROLLER_DISCOVERED=0
+OBUSPA_BOOT_MARKER="/etc/obuspa/.boot"
 
 log()
 {
@@ -57,18 +58,18 @@ get_vivsoi() {
 
 	data="${opt125}"
 	rem_len="${len}"
-	while [ $rem_len -gt 0 ]; do
+	while [ "${rem_len}" -gt 0 ]; do
 		ent_id=${data:0:8}
 		ent_id=$(printf "%d\n" "0x$ent_id")
 
-		if [ $ent_id -ne  3561 ]; then
+		if [ "${ent_id}" -ne  3561 ]; then
 			len_val=${data:8:2}
 			data_len=$(printf "%d\n" "0x$len_val")
 			# add 4 byte for ent_id and 1 byte for len
 			data_len=$(( data_len * 2 + 10 ))
 			# move ahead data to next enterprise id
 			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - $data_len ))
+			rem_len=$(( rem_len - data_len ))
 			continue
 		fi
 
@@ -79,7 +80,7 @@ get_vivsoi() {
 		data_len=$(( data_len * 2 + 10 ))
 
 		opt_len=$(printf "%d\n" "0x$len_val")
-		[ $opt_len -eq 0 ] && return
+		[ "${opt_len}" -eq 0 ] && return
 
 		# populate the option data of enterprise id
 		sub_data_len=$(( opt_len * 2))
@@ -98,28 +99,28 @@ get_vivsoi() {
 			sub_opt_len=$(( sub_opt_len * 2 ))
 
 			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:${sub_opt_len}}
+			sub_opt_val=${sub_data:4:"${sub_opt_len}"}
 
 			# assign the value found in sub option
 			case "${sub_opt_id}" in
 				"25")
-					URL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+					URL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 					CONTROLLER_DISCOVERED=1
 				;;
 				"26")
-					PROV_CODE=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+					PROV_CODE=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 					CONTROLLER_DISCOVERED=1
 				;;
 				"27")
-					RETRY_MIN_INTERVAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+					RETRY_MIN_INTERVAL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 					CONTROLLER_DISCOVERED=1
 				;;
 				"28")
-					RETRY_INTERVAL_MUL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+					RETRY_INTERVAL_MUL=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 					CONTROLLER_DISCOVERED=1
 				;;
 				"29")
-					ENDPOINT_ID=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
+					ENDPOINT_ID=$(echo -n "${sub_opt_val}" | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
 					CONTROLLER_DISCOVERED=1
 				;;
 			esac
@@ -131,7 +132,7 @@ get_vivsoi() {
 			sub_data_len=$((sub_data_len - sub_opt_end))
 
 			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
+			sub_data=${sub_data:"${sub_opt_end}":"${sub_data_len}"}
 		done
 
 		# move ahead data to next enterprise id
@@ -146,7 +147,7 @@ get_access_role()
 
 	lan_proto="$(uci -q get network.lan.proto)"
 
-	if [ "${lan_proto}" == "dhcp" ]; then
+	if [ "${lan_proto}" = "dhcp" ]; then
 		mode="extender"
 	else
 		mode="full_access"
@@ -174,7 +175,7 @@ config_get_bool enable_obuspa global enabled 1
 config_get wan_intf global interface
 config_get_bool dhcp_discovery global dhcp_discovery 1
 
-if [ "$enable_obuspa" = "0" ] || [ "$dhcp_discovery" = "0" ]; then
+if [ "${enable_obuspa}" -eq 0 ] || [ "${dhcp_discovery}" -eq 0 ]; then
 	return 0
 fi
 
@@ -190,9 +191,9 @@ if [ -z "${wan_intf}" ]; then
 	fi
 fi
 
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
+if [ "${wan_intf}" = "${INTERFACE}" ]; then
 	if [ -n "$opt125" ]; then
-		len=$(printf "$opt125"|wc -c)
+		len=$(echo -n "${opt125}"|wc -c)
 		get_vivsoi "$opt125" "$len"
 	fi
 
@@ -228,10 +229,10 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 				;;
 			*)
 				# This is an FQDN, perform DNS query
-				nslookup $URL > /tmp/fqdn_ip
-				nslookup -type=ptr $URL > /tmp/fqdn_ptr
-				nslookup -type=srv $URL > /tmp/fqdn_srv
-				nslookup -type=txt $URL > /tmp/fqdn_srv
+				nslookup "${URL}" > /tmp/fqdn_ip
+				nslookup -type=ptr "${URL}" > /tmp/fqdn_ptr
+				nslookup -type=srv "${URL}" > /tmp/fqdn_srv
+				nslookup -type=txt "${URL}" > /tmp/fqdn_srv
 
 				# TODO extend to collect information from dns-sd records
 				;;
@@ -247,16 +248,16 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 		fi
 	fi
 
-	if [ "${proto}" == "mqtt" ] || [ "${proto}" == "mqtts" ]; then
+	if [ "${proto}" = "mqtt" ] || [ "${proto}" = "mqtts" ]; then
 		offered_proto="MQTT"
-		if [ "${proto}" == "mqtt" ]; then
+		if [ "${proto}" = "mqtt" ]; then
 			mtp_encrypt="TCP/IP"
 		else
 			mtp_encrypt="TLS"
 		fi
-	elif [ "${proto}" == "ws" ] || [ "${proto}" == "wss" ]; then
+	elif [ "${proto}" = "ws" ] || [ "${proto}" = "wss" ]; then
 		offered_proto="WebSocket"
-		if [ "${proto}" == "wss" ]; then
+		if [ "${proto}" = "wss" ]; then
 			mtp_encrypt="1"
 		else
 			mtp_encrypt="0"
@@ -265,35 +266,46 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 
 	controllers=$(uci -q show obuspa | grep "=controller" | cut -d'=' -f1 | cut -d'.' -f2)
 	for controller in $controllers; do
-		dhcp_disc=$(uci -q get obuspa.$controller.dhcp_discovered)
+		dhcp_disc=$(uci -q get obuspa."${controller}".dhcp_discovered)
 		if [ "${dhcp_disc}" -eq 1 ]; then
 			dhcp_controller="${controller}"
 			break
 		fi
 	done
 
+	# Check if any of the existing controller section matches with the endpointid
+	if [ -z "${dhcp_controller}" ] && [ -n "${ENDPOINT_ID}" ]; then
+		for controller in $controllers; do
+			endpointid=$(uci -q get obuspa."${controller}".EndpointID)
+			if [ "${endpointid}" = "${ENDPOINT_ID}" ]; then
+				dhcp_controller="${controller}"
+				break
+			fi
+		done
+	fi
+
 	if [ -n "${dhcp_controller}" ]; then
-		cont_proto="$(uci -q get obuspa.$dhcp_controller.Protocol)"
-		if [ "${cont_proto}" == "MQTT" ]; then
-			dhcp_mqtt="$(uci -q get obuspa.$dhcp_controller.mqtt)"
+		cont_proto=$(uci -q get obuspa."${dhcp_controller}".Protocol)
+		if [ "${cont_proto}" = "MQTT" ]; then
+			dhcp_mqtt=$(uci -q get obuspa."${dhcp_controller}".mqtt)
 
 			mtps=$(uci -q show obuspa | grep "=mtp" | cut -d'=' -f1 | cut -d'.' -f2)
 			for mtp in $mtps; do
-				mtp_mqtt="$(uci -q get obuspa.$mtp.mqtt)"
-				if [ "${mtp_mqtt}" == "${dhcp_mqtt}" ]; then
+				mtp_mqtt=$(uci -q get obuspa."${mtp}".mqtt)
+				if [ "${mtp_mqtt}" = "${dhcp_mqtt}" ]; then
 					dhcp_mtp="${mtp}"
 					break
 				fi
 			done
-		elif [ "${cont_proto}" == "WebSocket" ]; then
-			cont_port="$(uci -q get obuspa.$dhcp_controller.Port)"
-			cont_encr="$(uci -q get obuspa.$dhcp_controller.EnableEncryption)"
+		elif [ "${cont_proto}" = "WebSocket" ]; then
+			cont_port=$(uci -q get obuspa."${dhcp_controller}".Port)
+			cont_encr=$(uci -q get obuspa."${dhcp_controller}".EnableEncryption)
 
 			mtps=$(uci -q show obuspa | grep "=mtp" | cut -d'=' -f1 | cut -d'.' -f2)
 			for mtp in $mtps; do
-				mtp_port="$(uci -q get obuspa.$mtp.Port)"
-				mtp_encr="$(uci -q get obuspa.$mtp.EnableEncryption)"
-				if [ "${mtp_port}" == "${cont_port}" ] && [ "${mtp_encr}" == "${cont_encr}" ]; then
+				mtp_port=$(uci -q get obuspa."${mtp}".Port)
+				mtp_encr=$(uci -q get obuspa."${mtp}".EnableEncryption)
+				if [ "${mtp_port}" = "${cont_port}" ] && [ "${mtp_encr}" = "${cont_encr}" ]; then
 					dhcp_mtp="${mtp}"
 					break
 				fi
@@ -306,43 +318,43 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 
 	if [ -n "${dhcp_controller}" ]; then
 		## Handling of controller section
-		ct_endpoint=$(uci -q get obuspa.$dhcp_controller.EndpointID)
-		ct_proto=$(uci -q get obuspa.$dhcp_controller.Protocol)
-		ct_prov=$(uci -q get obuspa.$dhcp_controller.ProvisioningCode)
+		ct_endpoint=$(uci -q get obuspa."${dhcp_controller}".EndpointID)
+		ct_proto=$(uci -q get obuspa."${dhcp_controller}".Protocol)
+		ct_prov=$(uci -q get obuspa."${dhcp_controller}".ProvisioningCode)
 
 		if [ "${ct_proto}" = "MQTT" ]; then
-			ct_topic=$(uci -q get obuspa.$dhcp_controller.Topic)
+			ct_topic=$(uci -q get obuspa."${dhcp_controller}".Topic)
 		else
-			ct_topic=$(uci -q get obuspa.$dhcp_controller.Path)
+			ct_topic=$(uci -q get obuspa."${dhcp_controller}".Path)
 		fi
 
 		if [ -n "${ENDPOINT_ID}" ] && [ "${ct_endpoint}" != "${ENDPOINT_ID}" ]; then
-			uci -q set obuspa.$dhcp_controller.EndpointID="${ENDPOINT_ID}"
+			uci -q set obuspa."${dhcp_controller}".EndpointID="${ENDPOINT_ID}"
 			uci_change=1
 		fi
 
 		if [ -n "${offered_proto}" ] && [ "${ct_proto}" != "${offered_proto}" ]; then
-			uci -q set obuspa.$dhcp_controller.Protocol="${offered_proto}"
+			uci -q set obuspa."${dhcp_controller}".Protocol="${offered_proto}"
 			if [ "${offered_proto}" != "MQTT" ]; then
-				uci -q set obuspa.$dhcp_controller.mqtt=""
-				uci -q set obuspa.$dhcp_controller.Topic=""
-				uci -q set obuspa.$dhcp_controller.Host="${ip}"
-				uci -q set obuspa.$dhcp_controller.Port="${port}"
-				uci -q set obuspa.$dhcp_controller.Path="${ct_topic}"
-				uci -q set obuspa.$dhcp_controller.EnableEncryption="${mtp_encrypt}"
+				uci -q delete obuspa."${dhcp_controller}".mqtt
+				uci -q delete obuspa."${dhcp_controller}".Topic
+				uci -q set obuspa."${dhcp_controller}".Host="${ip}"
+				uci -q set obuspa."${dhcp_controller}".Port="${port}"
+				uci -q set obuspa."${dhcp_controller}".Path="${ct_topic}"
+				uci -q set obuspa."${dhcp_controller}".EnableEncryption="${mtp_encrypt}"
 			else
-				uci -q set obuspa.$dhcp_controller.EnableEncryption=""
-				uci -q set obuspa.$dhcp_controller.Path=""
-				uci -q set obuspa.$dhcp_controller.Host=""
-				uci -q set obuspa.$dhcp_controller.Port=""
+				uci -q delete obuspa."${dhcp_controller}".EnableEncryption
+				uci -q delete obuspa."${dhcp_controller}".Path
+				uci -q delete obuspa."${dhcp_controller}".Host
+				uci -q delete obuspa."${dhcp_controller}".Port
 
 				if [ -z "${dhcp_mqtt}" ]; then
-					uci -q set obuspa.$dhcp_controller.mqtt='dhcpmqtt'
+					uci -q set obuspa."${dhcp_controller}".mqtt='dhcpmqtt'
 				else
-					uci -q set obuspa.$dhcp_controller.mqtt="${dhcp_mqtt}"
+					uci -q set obuspa."${dhcp_controller}".mqtt="${dhcp_mqtt}"
 				fi
 
-				uci -q set obuspa.$dhcp_controller.Topic="${ct_topic}"
+				uci -q set obuspa."${dhcp_controller}".Topic="${ct_topic}"
 			fi
 
 			proto_changed=1
@@ -355,38 +367,37 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 				protocol="${offered_proto}"
 			fi
 
-			if [ "${protocol}" == "MQTT" ]; then
-				uci -q set obuspa.$dhcp_controller.Topic="${topic}"
+			if [ "${protocol}" = "MQTT" ]; then
+				uci -q set obuspa."${dhcp_controller}".Topic="${topic}"
 			else
-				uci -q set obuspa.$dhcp_controller.Path="${topic}"
+				uci -q set obuspa."${dhcp_controller}".Path="${topic}"
 			fi
 
 			uci_change=1
 		fi
 
 		if [ -n "${PROV_CODE}" ] && [ "${ct_prov}" != "${PROV_CODE}" ]; then
-			uci -q set obuspa.$dhcp_controller.ProvisioningCode="${PROV_CODE}"
+			uci -q set obuspa."${dhcp_controller}".ProvisioningCode="${PROV_CODE}"
 			uci_change=1
 		fi
 
 		if [ "${proto_changed}" -eq 1 ]; then
-			if [ "${offered_proto}" == "WebSocket" ]; then
+			if [ "${offered_proto}" = "WebSocket" ]; then
 				if [ -n "${dhcp_mqtt}" ]; then
-					uci -q del obuspa.$dhcp_mqtt
+					uci -q delete obuspa."${dhcp_mqtt}"
 				fi
 
 				if [ -z "${dhcp_mtp}" ]; then
-					sec=$(uci -q add obuspa mtp)
-					uci -q rename obuspa."${sec}"='dhcpmtp'
+					uci -q set obuspa.dhcpmtp="mtp"
 					dhcp_mtp="dhcpmtp"
-					uci -q set obuspa.$dhcp_mtp.Enable='1'
+					uci -q set obuspa."${dhcp_mtp}".Enable='1'
 				fi
 
-				uci -q set obuspa.$dhcp_mtp.mqtt=''
-				uci -q set obuspa.$dhcp_mtp.ResponseTopicConfigured=''
-				uci -q set obuspa.$dhcp_mtp.Protocol='WebSocket'
-				uci -q set obuspa.$dhcp_mtp.Port="${port}"
-				uci -q set obuspa.$dhcp_mtp.EnableEncryption="${mtp_encrypt}"
+				uci -q set obuspa."${dhcp_mtp}".mqtt=''
+				uci -q set obuspa."${dhcp_mtp}".ResponseTopicConfigured=''
+				uci -q set obuspa."${dhcp_mtp}".Protocol='WebSocket'
+				uci -q set obuspa."${dhcp_mtp}".Port="${port}"
+				uci -q set obuspa."${dhcp_mtp}".EnableEncryption="${mtp_encrypt}"
 
 				uci_change=1
 			else
@@ -394,137 +405,135 @@ if [ "${wan_intf}" == "${INTERFACE}" ]; then
 					user="$(uci -q get obuspa.global.username)"
 					pass="$(uci -q get obuspa.global.password)"
 
-					sec=$(uci -q add obuspa mqtt)
-					uci -q rename obuspa."${sec}"='dhcpmqtt'
+					uci -q set obuspa.dhcpmqtt="mqtt"
 					dhcp_mqtt="dhcpmqtt"
-					uci -q set obuspa.$dhcp_mqtt.Enable='1'
-					uci -q set obuspa.$dhcp_mqtt.Username="${user}"
-					uci -q set obuspa.$dhcp_mqtt.Password="${pass}"
+					uci -q set obuspa."${dhcp_mqtt}".Enable='1'
+					uci -q set obuspa."${dhcp_mqtt}".Username="${user}"
+					uci -q set obuspa."${dhcp_mqtt}".Password="${pass}"
 				fi
 
-				uci -q set obuspa.$dhcp_mqtt.BrokerAddress="${ip}"
-				uci -q set obuspa.$dhcp_mqtt.BrokerPort="${port}"
-				uci -q set obuspa.$dhcp_mqtt.TransportProtocol="${mtp_encrypt}"
-				uci -q set obuspa.$dhcp_mqtt.ProtocolVersion='5.0'
+				uci -q set obuspa."${dhcp_mqtt}".BrokerAddress="${ip}"
+				uci -q set obuspa."${dhcp_mqtt}".BrokerPort="${port}"
+				uci -q set obuspa."${dhcp_mqtt}".TransportProtocol="${mtp_encrypt}"
+				uci -q set obuspa."${dhcp_mqtt}".ProtocolVersion='5.0'
 
 				if [ -z "${dhcp_mtp}" ]; then
-					sec=$(uci -q add obuspa mtp)
-					uci -q rename obuspa."${sec}"='dhcpmtp'
+					uci -q set obuspa.dhcpmtp="mtp"
 					dhcp_mtp="dhcpmtp"
-					uci -q set obuspa.$dhcp_mtp.Enable='1'
+					uci -q set obuspa."${dhcp_mtp}".Enable='1'
 				fi
 
 				agent_topic=$(get_agent_topic)
-				uci -q set obuspa.$dhcp_mtp.Port=""
-				uci -q set obuspa.$dhcp_mtp.EnableEncryption=""
-				uci -q set obuspa.$dhcp_mtp.Protocol='MQTT'
-				uci -q set obuspa.$dhcp_mtp.ResponseTopicConfigured="${agent_topic}"
-				uci -q set obuspa.$dhcp_mtp.mqtt="${dhcp_mqtt}"
+				uci -q delete obuspa."${dhcp_mtp}".Port
+				uci -q delete obuspa."${dhcp_mtp}".EnableEncryption
+				uci -q set obuspa."${dhcp_mtp}".Protocol='MQTT'
+				uci -q set obuspa."${dhcp_mtp}".ResponseTopicConfigured="${agent_topic}"
+				uci -q set obuspa."${dhcp_mtp}".mqtt="${dhcp_mqtt}"
 
 				uci_change=1
 			fi
 		else
-			if [ "${ct_proto}" == "WebSocket" ]; then
-				conf_ip="$(uci -q get obuspa.$dhcp_controller.Host)"
-				conf_port="$(uci -q get obuspa.$dhcp_mtp.Port)"
-				conf_encr="$(uci -q get obuspa.$dhcp_mtp.EnableEncryption)"
+			if [ "${ct_proto}" = "WebSocket" ]; then
+				conf_ip="$(uci -q get obuspa."${dhcp_controller}".Host)"
+				conf_port="$(uci -q get obuspa."${dhcp_mtp}".Port)"
+				conf_encr="$(uci -q get obuspa."${dhcp_mtp}".EnableEncryption)"
 
 				if [ -n "${ip}" ] && [ "${conf_ip}" != "${ip}" ]; then
-					uci -q set obuspa.$dhcp_controller.Host="${ip}"
+					uci -q set obuspa."${dhcp_controller}".Host="${ip}"
 					uci_change=1
 				fi
 
 				if [ -n "${port}" ] && [ "${conf_port}" != "${port}" ]; then
-					uci -q set obuspa.$dhcp_mtp.Port="${port}"
-					uci -q set obuspa.$dhcp_controller.Port="${port}"
+					uci -q set obuspa."${dhcp_mtp}".Port="${port}"
+					uci -q set obuspa."${dhcp_controller}".Port="${port}"
 					uci_change=1
 				fi
 
 				if [ -n "${mtp_encrypt}" ] && [ "${conf_encr}" != "${mtp_encrypt}" ]; then
-					uci -q set obuspa.$dhcp_mtp.EnableEncryption="${mtp_encrypt}"
-					uci -q set obuspa.$dhcp_controller.EnableEncryption="${mtp_encrypt}"
+					uci -q set obuspa."${dhcp_mtp}".EnableEncryption="${mtp_encrypt}"
+					uci -q set obuspa."${dhcp_controller}".EnableEncryption="${mtp_encrypt}"
 					uci_change=1
 				fi
 			else
-				conf_ip="$(uci -q get obuspa.$dhcp_mqtt.BrokerAddress)"
-				conf_port="$(uci -q get obuspa.$dhcp_mqtt.BrokerPort)"
-				conf_encr="$(uci -q get obuspa.$dhcp_mqtt.TransportProtocol)"
+				conf_ip=$(uci -q get obuspa."${dhcp_mqtt}".BrokerAddress)
+				conf_port=$(uci -q get obuspa."${dhcp_mqtt}".BrokerPort)
+				conf_encr=$(uci -q get obuspa."${dhcp_mqtt}".TransportProtocol)
 
 				if [ -n "${port}" ] && [ "${conf_port}" != "${port}" ]; then
-					uci -q set obuspa.$dhcp_mqtt.BrokerPort="${port}"
+					uci -q set obuspa."${dhcp_mqtt}".BrokerPort="${port}"
 					uci_change=1
 				fi
 
 				if [ -n "${mtp_encrypt}" ] && [ "${conf_encr}" != "${mtp_encrypt}" ]; then
-					uci -q set obuspa.$dhcp_mqtt.TransportProtocol="${mtp_encrypt}"
+					uci -q set obuspa."${dhcp_mqtt}".TransportProtocol="${mtp_encrypt}"
 					uci_change=1
 				fi
 
 				if [ -n "${ip}" ] && [ "${conf_ip}" != "${ip}" ]; then
-					uci -q set obuspa.$dhcp_mqtt.BrokerAddress="${ip}"
+					uci -q set obuspa."${dhcp_mqtt}".BrokerAddress="${ip}"
 					uci_change=1
 				fi
 			fi
 		fi
 	else
-		uci -q del obuspa.dhcpmtp
-		uci -q del obuspa.dhcpmqtt
+		# Only setup a new controller, only if mandatory param present
+		if [ -n "${ENDPOINT_ID}" ] && [ -n "${URL}" ]; then
+			uci -q delete obuspa.dhcpmtp
+			uci -q delete obuspa.dhcpmqtt
 
-		sec=$(uci -q add obuspa controller)
-		uci -q rename obuspa."${sec}"='dhcpcontroller'
-		uci -q set obuspa.dhcpcontroller.dhcp_discovered="1"
-		uci -q set obuspa.dhcpcontroller.EndpointID="${ENDPOINT_ID}"
-		uci -q set obuspa.dhcpcontroller.ProvisioningCode="${PROV_CODE}"
-		uci -q set obuspa.dhcpcontroller.Protocol="${offered_proto}"
-		uci -q set obuspa.dhcpcontroller.assigned_role_name="$(get_access_role)"
-		uci -q set obuspa.dhcpcontroller.Enable='1'
+			uci -q set obuspa.dhcpcontroller="controller"
+			uci -q set obuspa.dhcpcontroller.dhcp_discovered="1"
+			uci -q set obuspa.dhcpcontroller.EndpointID="${ENDPOINT_ID}"
+			uci -q set obuspa.dhcpcontroller.ProvisioningCode="${PROV_CODE}"
+			uci -q set obuspa.dhcpcontroller.Protocol="${offered_proto}"
+			uci -q set obuspa.dhcpcontroller.assigned_role_name="$(get_access_role)"
+			uci -q set obuspa.dhcpcontroller.Enable='1'
 
-		if [ -n "${offered_proto}" ]; then
-			if [ "${offered_proto}" == "MQTT" ]; then
-				user="$(uci -q get obuspa.global.username)"
-				pass="$(uci -q get obuspa.global.password)"
+			if [ -n "${offered_proto}" ]; then
+				if [ "${offered_proto}" = "MQTT" ]; then
+					user="$(uci -q get obuspa.global.username)"
+					pass="$(uci -q get obuspa.global.password)"
 
-				uci -q set obuspa.dhcpcontroller.Topic="${topic}"
-				uci -q set obuspa.dhcpcontroller.mqtt='dhcpmqtt'
+					uci -q set obuspa.dhcpcontroller.Topic="${topic}"
+					uci -q set obuspa.dhcpcontroller.mqtt='dhcpmqtt'
 
-				sec=$(uci -q add obuspa mqtt)
-				uci -q rename obuspa."${sec}"='dhcpmqtt'
-				uci -q set obuspa.dhcpmqtt.BrokerAddress="${ip}"
-				uci -q set obuspa.dhcpmqtt.BrokerPort="${port}"
-				uci -q set obuspa.dhcpmqtt.TransportProtocol="${mtp_encrypt}"
-				uci -q set obuspa.dhcpmqtt.Enable='1'
-				uci -q set obuspa.dhcpmqtt.ProtocolVersion='5.0'
-				uci -q set obuspa.dhcpmqtt.Username="${user}"
-				uci -q set obuspa.dhcpmqtt.Password="${pass}"
+					uci -q set obuspa.dhcpmqtt="mqtt"
+					uci -q set obuspa.dhcpmqtt.BrokerAddress="${ip}"
+					uci -q set obuspa.dhcpmqtt.BrokerPort="${port}"
+					uci -q set obuspa.dhcpmqtt.TransportProtocol="${mtp_encrypt}"
+					uci -q set obuspa.dhcpmqtt.Enable='1'
+					uci -q set obuspa.dhcpmqtt.ProtocolVersion='5.0'
+					uci -q set obuspa.dhcpmqtt.Username="${user}"
+					uci -q set obuspa.dhcpmqtt.Password="${pass}"
 
 
-				agent_topic=$(get_agent_topic)
-				sec=$(uci -q add obuspa mtp)
-				uci -q rename obuspa."${sec}"='dhcpmtp'
-				uci -q set obuspa.dhcpmtp.Protocol='MQTT'
-				uci -q set obuspa.dhcpmtp.ResponseTopicConfigured="${agent_topic}"
-				uci -q set obuspa.dhcpmtp.Enable='1'
-				uci -q set obuspa.dhcpmtp.mqtt='dhcpmqtt'
-			else
-				uci -q set obuspa.dhcpcontroller.Path="${topic}"
-				uci -q set obuspa.dhcpcontroller.Host="${ip}"
-				uci -q set obuspa.dhcpcontroller.Port="${port}"
-				uci -q set obuspa.dhcpcontroller.EnableEncryption="${mtp_encrypt}"
+					agent_topic=$(get_agent_topic)
+					uci -q set obuspa.dhcpmtp="mtp"
+					uci -q set obuspa.dhcpmtp.Protocol='MQTT'
+					uci -q set obuspa.dhcpmtp.ResponseTopicConfigured="${agent_topic}"
+					uci -q set obuspa.dhcpmtp.Enable='1'
+					uci -q set obuspa.dhcpmtp.mqtt='dhcpmqtt'
+				else
+					uci -q set obuspa.dhcpcontroller.Path="${topic}"
+					uci -q set obuspa.dhcpcontroller.Host="${ip}"
+					uci -q set obuspa.dhcpcontroller.Port="${port}"
+					uci -q set obuspa.dhcpcontroller.EnableEncryption="${mtp_encrypt}"
 
-				sec=$(uci -q add obuspa mtp)
-				uci -q rename obuspa."${sec}"='dhcpmtp'
-
-				uci -q set obuspa.dhcpmtp.Protocol='WebSocket'
-				uci -q set obuspa.dhcpmtp.Port="${port}"
-				uci -q set obuspa.dhcpmtp.Enable='1'
-				uci -q set obuspa.dhcpmtp.EnableEncryption="${mtp_encrypt}"
+					uci -q set obuspa.dhcpmtp="mtp"
+					uci -q set obuspa.dhcpmtp.Protocol='WebSocket'
+					uci -q set obuspa.dhcpmtp.Port="${port}"
+					uci -q set obuspa.dhcpmtp.Enable='1'
+					uci -q set obuspa.dhcpmtp.EnableEncryption="${mtp_encrypt}"
+				fi
 			fi
+			uci_change=1
 		fi
-
-		uci_change=1
 	fi
 
 	if [ ${uci_change} -eq 1 ]; then
+		if [ -f "${OBUSPA_BOOT_MARKER}" ]; then
+			rm -f "${OBUSPA_BOOT_MARKER}"
+		fi
 		log "# Reloading obuspa as dhcp config changed"
 		ubus call uci commit '{"config":"obuspa"}'
 	fi

obuspa/patches/0002-fix_e2e_session_init.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.1/src/core/device_controller.c
+Index: obuspa-10.0.5.0/src/core/device_controller.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/device_controller.c
-+++ obuspa-10.0.0.1/src/core/device_controller.c
-@@ -4211,6 +4211,14 @@ int ProcessControllerAdded(int cont_inst
+--- obuspa-10.0.5.0.orig/src/core/device_controller.c
++++ obuspa-10.0.5.0/src/core/device_controller.c
+@@ -4223,6 +4223,14 @@ int ProcessControllerAdded(int cont_inst
          goto exit;
      }
  
@@ -17,7 +17,7 @@ Index: obuspa-10.0.0.1/src/core/device_controller.c
      // Exit if unable to get the object instance numbers present in this controller's MTP table
      USP_SNPRINTF(path, sizeof(path), "%s.%d.MTP", device_cont_root, cont_instance);
      err = DATA_MODEL_GetInstances(path, &iv);
-@@ -4252,14 +4260,6 @@ int ProcessControllerAdded(int cont_inst
+@@ -4264,14 +4272,6 @@ int ProcessControllerAdded(int cont_inst
      DEVICE_MQTT_UpdateControllerTopics();
  #endif
  

obuspa/patches/0004-bulkdata_extn.patch

@@ -1,7 +1,7 @@
-Index: obuspa-10.0.0.1/src/core/bdc_exec.c
+Index: obuspa-10.0.4.0/src/core/bdc_exec.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/bdc_exec.c
-+++ obuspa-10.0.0.1/src/core/bdc_exec.c
+--- obuspa-10.0.4.0.orig/src/core/bdc_exec.c
++++ obuspa-10.0.4.0/src/core/bdc_exec.c
 @@ -549,10 +549,25 @@ int StartSendingReport(bdc_connection_t
  
      // Set the list of headers
@@ -30,10 +30,10 @@ Index: obuspa-10.0.0.1/src/core/bdc_exec.c
          bc->headers = curl_slist_append(bc->headers, "Content-Encoding: gzip");
      }
  
-Index: obuspa-10.0.0.1/src/core/bdc_exec.h
+Index: obuspa-10.0.4.0/src/core/bdc_exec.h
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/bdc_exec.h
-+++ obuspa-10.0.0.1/src/core/bdc_exec.h
+--- obuspa-10.0.4.0.orig/src/core/bdc_exec.h
++++ obuspa-10.0.4.0/src/core/bdc_exec.h
 @@ -54,6 +54,8 @@ void BDC_EXEC_ScheduleExit(void);
  #define BDC_FLAG_PUT            0x00000001  // If set, HTTP PUT should be used instead of HTTP POST when sending the report to the BDC server
  #define BDC_FLAG_GZIP           0x00000002  // If set, the reports contants are Gzipped
@@ -45,10 +45,10 @@ Index: obuspa-10.0.0.1/src/core/bdc_exec.h
 +#define BDC_FLAG_HEADER_PER_ROW  0x00000020 // If set, report format in header would be csv ParameterPerRow
 +#define BDC_FLAG_HEADER_PER_COL  0x00000040 // If set, report format in header would be csv ParameterPerColumn
  #endif
-Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
+Index: obuspa-10.0.4.0/src/core/device_bulkdata.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/device_bulkdata.c
-+++ obuspa-10.0.0.1/src/core/device_bulkdata.c
+--- obuspa-10.0.4.0.orig/src/core/device_bulkdata.c
++++ obuspa-10.0.4.0/src/core/device_bulkdata.c
 @@ -71,8 +71,12 @@
  
  //------------------------------------------------------------------------------
@@ -95,7 +95,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  int Validate_BulkDataHTTPMethod(dm_req_t *req, char *value);
 @@ -247,7 +259,8 @@ bulkdata_profile_t *bulkdata_find_free_p
  bulkdata_profile_t *bulkdata_find_profile(int profile_id);
- int bulkdata_calc_report_map(bulkdata_profile_t *bp, kv_vector_t *report_map);
+ int bulkdata_calc_report_map(bulkdata_profile_t *bp, kv_vector_t *report_map, combined_role_t *combined_role);
  int bulkdata_reduce_to_alt_name(char *spec, char *path, char *alt_name, char *out_buf, int buf_len);
 -char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp);
 +char *bulkdata_generate_json_report(bulkdata_profile_t *bp, char *report_timestamp, char *report_format);
@@ -103,16 +103,16 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  unsigned char *bulkdata_compress_report(profile_ctrl_params_t *ctrl, char *input_buf, int input_len, int *p_output_len);
  int bulkdata_schedule_sending_http_report(profile_ctrl_params_t *ctrl, bulkdata_profile_t *bp, unsigned char *json_report, int report_len);
  int bulkdata_start_profile(bulkdata_profile_t *bp);
-@@ -262,6 +275,8 @@ char *bulkdata_platform_calc_uri_query_s
- int bulkdata_platform_get_param_refs(int profile_id, param_ref_vector_t *param_refs);
- void bulkdata_expand_param_ref(param_ref_entry_t *pr, group_get_vector_t *ggv);
+@@ -263,6 +276,8 @@ int bulkdata_platform_get_param_refs(int
+ int bulkdata_platform_calc_combined_role(int instance, combined_role_t **bulkdata_role, combined_role_t *combined_role, int *cont_instance);
+ void bulkdata_expand_param_ref(param_ref_entry_t *pr, group_get_vector_t *ggv, combined_role_t *combined_role);
  void bulkdata_append_to_result_map(param_ref_entry_t *pr, group_get_vector_t *ggv, kv_vector_t *report_map);
 +void append_string_to_target(char *str, char **output);
 +char *csv_encode(const char *str);
+ int GetAuto_BulkDataController(dm_req_t *req, char *buf, int len);
  #ifdef ENABLE_MQTT
  int Validate_BulkDataMqttReference(dm_req_t *req, char *value);
- void bulkdata_process_profile_mqtt(bulkdata_profile_t *bp);
-@@ -299,7 +314,7 @@ int DEVICE_BULKDATA_Init(void)
+@@ -301,7 +316,7 @@ int DEVICE_BULKDATA_Init(void)
      err |= USP_REGISTER_VendorParam_ReadOnly("Device.BulkData.Status", Get_BulkDataGlobalStatus, DM_STRING);
      err |= USP_REGISTER_Param_Constant("Device.BulkData.MinReportingInterval", BULKDATA_MINIMUM_REPORTING_INTERVAL_STR, DM_UINT);
      err |= USP_REGISTER_Param_SupportedList("Device.BulkData.Protocols", bdc_protocols, NUM_ELEM(bdc_protocols));
@@ -121,7 +121,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      err |= USP_REGISTER_Param_Constant("Device.BulkData.ParameterWildCardSupported", "true", DM_BOOL);
      err |= USP_REGISTER_Param_Constant("Device.BulkData.MaxNumberOfProfiles", BULKDATA_MAX_PROFILES_STR, DM_INT);
      err |= USP_REGISTER_Param_Constant("Device.BulkData.MaxNumberOfParameterReferences", "-1", DM_INT);
-@@ -314,7 +329,7 @@ int DEVICE_BULKDATA_Init(void)
+@@ -316,7 +331,7 @@ int DEVICE_BULKDATA_Init(void)
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.Name", "", NULL, NULL, DM_STRING);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.NumberOfRetainedFailedReports", "0", Validate_NumberOfRetainedFailedReports, NULL, DM_INT);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.Protocol", BULKDATA_PROTOCOL_HTTP, Validate_BulkDataProtocol, NULL, DM_STRING);
@@ -129,8 +129,8 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
 +    err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.EncodingType", BULKDATA_ENCODING_TYPE_JSON, Validate_BulkDataEncodingType, NULL, DM_STRING);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.ReportingInterval", "86400", Validate_BulkDataReportingInterval, NotifyChange_BulkDataReportingInterval, DM_UINT);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.TimeReference", UNKNOWN_TIME_STR, NULL, NotifyChange_BulkDataTimeReference, DM_DATETIME);
- 
-@@ -326,9 +341,16 @@ int DEVICE_BULKDATA_Init(void)
+     err |= USP_REGISTER_DBParam_ReadOnlyAuto("Device.BulkData.Profile.{i}.Controller", GetAuto_BulkDataController, DM_STRING);
+@@ -329,9 +344,16 @@ int DEVICE_BULKDATA_Init(void)
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.Parameter.{i}.Reference", "", Validate_BulkDataReference, NULL, DM_STRING);
  
      // Device.BulkData.Profile.{i}.JSONEncoding
@@ -148,7 +148,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      // Device.BulkData.Profile.{i}.HTTP
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.HTTP.URL", "", NULL, NotifyChange_BulkDataURL, DM_STRING);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.HTTP.Username", "", NULL, NULL, DM_STRING);
-@@ -614,9 +636,10 @@ int Validate_BulkDataProtocol(dm_req_t *
+@@ -687,9 +709,10 @@ int Validate_BulkDataProtocol(dm_req_t *
  int Validate_BulkDataEncodingType(dm_req_t *req, char *value)
  {
      // Exit if trying to set a value outside of the range we accept
@@ -162,7 +162,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
          return USP_ERR_INVALID_VALUE;
      }
  
-@@ -720,9 +743,36 @@ int Validate_BulkDataReference(dm_req_t
+@@ -793,9 +816,36 @@ int Validate_BulkDataReference(dm_req_t
  int Validate_BulkDataReportFormat(dm_req_t *req, char *value)
  {
      // Exit if trying to set a value outside of the range we accept
@@ -201,7 +201,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
          return USP_ERR_INVALID_VALUE;
      }
  
-@@ -2053,6 +2103,14 @@ int bulkdata_platform_get_profile_contro
+@@ -2151,6 +2201,14 @@ int bulkdata_platform_get_profile_contro
          return err;
      }
  
@@ -216,7 +216,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      // Exit if unable to get ReportTimestamp
      USP_SNPRINTF(path, sizeof(path), "Device.BulkData.Profile.%d.JSONEncoding.ReportTimestamp", bp->profile_id);
      err = DATA_MODEL_GetParameterValue(path, ctrl_params->report_timestamp, sizeof(ctrl_params->report_timestamp), 0);
-@@ -2061,6 +2119,54 @@ int bulkdata_platform_get_profile_contro
+@@ -2159,6 +2217,54 @@ int bulkdata_platform_get_profile_contro
          return err;
      }
  
@@ -271,7 +271,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  #ifdef ENABLE_MQTT
  {
      char protocol[32];
-@@ -2334,7 +2440,7 @@ void bulkdata_process_profile_http(bulkd
+@@ -2492,7 +2598,7 @@ void bulkdata_process_profile_http(bulkd
  {
      int err;
      report_t *cur_report;
@@ -280,7 +280,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      profile_ctrl_params_t ctrl;
      unsigned char *compressed_report;
      int compressed_len;
-@@ -2373,10 +2479,23 @@ void bulkdata_process_profile_http(bulkd
+@@ -2541,26 +2647,39 @@ void bulkdata_process_profile_http(bulkd
      }
  
      // Exit if unable to generate the report
@@ -308,7 +308,9 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
          return;
      }
  
-@@ -2385,14 +2504,14 @@ void bulkdata_process_profile_http(bulkd
+     // Print out the JSON report, if debugging is enabled
+-    USP_LOG_Info("\nBULK DATA: %sing at time %s, to url=%s", ctrl.method, iso8601_cur_time(buf, sizeof(buf)), ctrl.url);
++    USP_LOG_Info("BULK DATA: %sing at time %s, to url=%s", ctrl.method, iso8601_cur_time(buf, sizeof(buf)), ctrl.url);
      USP_LOG_Info("BULK DATA: using compression method=%s", ctrl.compression);
      if (enable_protocol_trace)
      {
@@ -327,7 +329,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      }
      // NOTE: From this point on, only the compressed_report exists
  
-@@ -2422,8 +2541,15 @@ void bulkdata_process_profile_usp_event(
+@@ -2590,8 +2709,15 @@ void bulkdata_process_profile_usp_event(
      kv_vector_t event_args;
      kv_pair_t kv;
      report_t *cur_report;
@@ -341,11 +343,11 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
 +    char escape_char[10];
 +    char csv_format[20];
 +    char row_timestamp[33];
- 
-     // Exit if the MTP has not been connected to successfully after bootup
-     // This is to prevent BDC events being enqueued before the Boot! event is sent (the Boot! event is only sent after successfully connecting to the MTP).
-@@ -2432,13 +2558,63 @@ void bulkdata_process_profile_usp_event(
-         goto exit;
+     combined_role_t *bulkdata_role;
+     combined_role_t combined_role;
+     int cont_instance;
+@@ -2610,13 +2736,63 @@ void bulkdata_process_profile_usp_event(
+         return;
      }
  
 -    // Exit if unable to get ReportTimestamp
@@ -415,7 +417,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  
      // When sending via USP events, only one report is ever sent in each USP event
      // So ensure all retained reports are removed. NOTE: Clearing the reports here is only necessary when switching protocol from HTTP to USP event, and where HTTP had some unsent reports
-@@ -2456,11 +2632,17 @@ void bulkdata_process_profile_usp_event(
+@@ -2634,11 +2810,17 @@ void bulkdata_process_profile_usp_event(
      }
      bp->num_retained_reports = 1;
  
@@ -436,7 +438,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
          return;
      }
  
-@@ -2468,15 +2650,15 @@ void bulkdata_process_profile_usp_event(
+@@ -2646,15 +2828,15 @@ void bulkdata_process_profile_usp_event(
  
      // Construct event_args manually to avoid the overhead of a malloc and copy of the report in KV_VECTOR_Add()
      kv.key = "Data";
@@ -446,7 +448,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      event_args.num_entries = 1;
  
      USP_SNPRINTF(path, sizeof(path), "Device.BulkData.Profile.%d.Push!", bp->profile_id);
-     DEVICE_SUBSCRIPTION_ProcessAllEventCompleteSubscriptions(path, &event_args);
+     DEVICE_SUBSCRIPTION_ProcessAllEventCompleteSubscriptions(path, &event_args, cont_instance);
  
 -    // Free the report. No need to free the event_args as json_report is the only thing dynamically allocated in it
 -    free(json_report);      // The report is not allocated via USP_MALLOC
@@ -455,7 +457,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  
      // From the point of view of this code, the report(s) have been successfully sent, so don't retain them
      // NOTE: Sending of the reports successfully is delegated to the USP notification retry mechanism
-@@ -2548,11 +2730,24 @@ void bulkdata_process_profile_mqtt(bulkd
+@@ -2736,15 +2918,28 @@ void bulkdata_process_profile_mqtt(bulkd
      }
  
      // Exit if unable to generate the report
@@ -485,7 +487,21 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
      }
  
      // Print out the JSON report, if debugging is enabled
-@@ -2763,7 +2958,7 @@ int bulkdata_reduce_to_alt_name(char *sp
+-    USP_LOG_Debug("\nBULK DATA: Sending at time %s to MQTT topic %s", iso8601_cur_time(buf, sizeof(buf)), ctrl.mqtt_publish_topic);
++    USP_LOG_Debug("BULK DATA: Sending at time %s to MQTT topic %s", iso8601_cur_time(buf, sizeof(buf)), ctrl.mqtt_publish_topic);
+     if (enable_protocol_trace)
+     {
+         USP_LOG_String(kLogLevel_Info, kLogType_Protocol, report);
+@@ -2939,7 +3134,7 @@ int bulkdata_reduce_to_alt_name(char *sp
+ 
+ /*********************************************************************//**
+ **
+-**  bulkdata_generate_json_report
++**  bulkdata_generate_json_name_value_pair_report
+ **
+ **  Generates a JSON name-value pair format report
+ **  NOTE: The report contains all retained failed reports, as well as the current report
+@@ -2951,7 +3146,7 @@ int bulkdata_reduce_to_alt_name(char *sp
  ** \return  pointer to NULL terminated dynamically allocated buffer containing the serialized report to send
  **
  **************************************************************************/
@@ -494,7 +510,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  {
      JsonNode *top;          // top of report
      JsonNode *array;        // array of reports (retained + current)
-@@ -2868,6 +3063,483 @@ char *bulkdata_generate_json_report(bulk
+@@ -3056,6 +3251,483 @@ char *bulkdata_generate_json_report(bulk
      return result;
  }
  
@@ -978,7 +994,7 @@ Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
  /*********************************************************************//**
  **
  **  bulkdata_compress_report
-@@ -3071,6 +3743,20 @@ int bulkdata_schedule_sending_http_repor
+@@ -3259,6 +3931,20 @@ int bulkdata_schedule_sending_http_repor
          flags |= BDC_FLAG_DATE_HEADER;
      }
  

obuspa/patches/0006-contains-expression.patch

@@ -1,7 +1,7 @@
-Index: obuspa-10.0.0.1/src/core/expr_vector.c
+Index: obuspa-10.0.5.0/src/core/expr_vector.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/expr_vector.c
-+++ obuspa-10.0.0.1/src/core/expr_vector.c
+--- obuspa-10.0.5.0.orig/src/core/expr_vector.c
++++ obuspa-10.0.5.0/src/core/expr_vector.c
 @@ -59,6 +59,7 @@ char *expr_op_2_str[kExprOp_Max] =
      "<",  // kExprOp_LessThan
      ">",  // kExprOp_GreaterThan
@@ -10,7 +10,7 @@ Index: obuspa-10.0.0.1/src/core/expr_vector.c
  };
  
  
-@@ -483,6 +484,15 @@ char *SplitOnOperator(char *buf, expr_op
+@@ -487,6 +488,15 @@ char *SplitOnOperator(char *buf, expr_op
          *op = '\0';
          return &op[2];
      }
@@ -26,10 +26,10 @@ Index: obuspa-10.0.0.1/src/core/expr_vector.c
  
      // Exit if found the "<" operator
      op = strchr(buf, '<');
-Index: obuspa-10.0.0.1/src/core/path_resolver.c
+Index: obuspa-10.0.5.0/src/core/path_resolver.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/path_resolver.c
-+++ obuspa-10.0.0.1/src/core/path_resolver.c
+--- obuspa-10.0.5.0.orig/src/core/path_resolver.c
++++ obuspa-10.0.5.0/src/core/path_resolver.c
 @@ -1088,7 +1088,7 @@ int ResolveUniqueKey(char *resolved, cha
      char temp[MAX_DM_PATH];
      bool is_match;
@@ -38,7 +38,7 @@ Index: obuspa-10.0.0.1/src/core/path_resolver.c
 +    expr_op_t valid_ops[] = {kExprOp_Equal, kExprOp_NotEqual, kExprOp_LessThanOrEqual, kExprOp_GreaterThanOrEqual, kExprOp_LessThan, kExprOp_GreaterThan, kExprOp_Contains};
  
      // Exit if unable to find the end of the unique key
-     p = strchr(unresolved, ']');
+     p = TEXT_UTILS_StrStr(unresolved, "]");
 @@ -1754,6 +1754,67 @@ int DoUniqueKeysMatch(int index, search_
          }
          USP_ASSERT(gge->value != NULL);     // GROUP_GET_VECTOR_GetValues() should have set an error message if the vendor hook didn't set a value for the parameter
@@ -107,10 +107,10 @@ Index: obuspa-10.0.0.1/src/core/path_resolver.c
          // Determine the function to call to perform the comparison
          if (type_flags & (DM_INT | DM_UINT | DM_ULONG | DM_LONG | DM_DECIMAL))
          {
-Index: obuspa-10.0.0.1/src/include/usp_api.h
+Index: obuspa-10.0.5.0/src/include/usp_api.h
 ===================================================================
---- obuspa-10.0.0.1.orig/src/include/usp_api.h
-+++ obuspa-10.0.0.1/src/include/usp_api.h
+--- obuspa-10.0.5.0.orig/src/include/usp_api.h
++++ obuspa-10.0.5.0/src/include/usp_api.h
 @@ -106,6 +106,7 @@ typedef enum
      kExprOp_LessThan,               // '<'
      kExprOp_GreaterThan,            // '>'

obuspa/patches/1000-SecuredRole-bbfdm.patch

@@ -1,40 +1,40 @@
-Index: obuspa-10.0.0.2/src/core/device.h
+Index: obuspa-10.0.5.0/src/core/device.h
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/device.h
-+++ obuspa-10.0.0.2/src/core/device.h
-@@ -305,6 +305,8 @@ void DEVICE_CTRUST_ApplyPermissionsToSub
+--- obuspa-10.0.5.0.orig/src/core/device.h
++++ obuspa-10.0.5.0/src/core/device.h
+@@ -311,6 +311,9 @@ int DEVICE_CTRUST_InstSelToRoleInstance(
  char *DEVICE_CTRUST_InstSelToPermTarget(int role_index, void *is, int *perm_instance);
  int DEVICE_CTRUST_SetRoleParameter(int instance, char *param_name, char *new_value);
  int DEVICE_CTRUST_SetPermissionParameter(int instance1, int instance2, char *param_name, char *new_value);
++
 +bool DEVICE_CTRUST_IsControllerSecured(void);
 +
+ int DEVICE_CTRUST_DumpPermissionSelectors(int role_instance, char *path);
  int DEVICE_REQUEST_Init(void);
  int DEVICE_REQUEST_Add(char *path, char *command_key, int *instance);
- void DEVICE_REQUEST_OperationComplete(int instance, int err_code, char *err_msg, kv_vector_t *output_args);
-Index: obuspa-10.0.0.2/src/core/device_ctrust.c
+Index: obuspa-10.0.5.0/src/core/device_ctrust.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/device_ctrust.c
-+++ obuspa-10.0.0.2/src/core/device_ctrust.c
-@@ -235,6 +235,7 @@ credential_t *FindCredentialByCertInstan
+--- obuspa-10.0.5.0.orig/src/core/device_ctrust.c
++++ obuspa-10.0.5.0/src/core/device_ctrust.c
+@@ -246,6 +246,7 @@ credential_t *FindCredentialByCertInstan
  int Get_CredentialRole(dm_req_t *req, char *buf, int len);
  int Get_CredentialCertificate(dm_req_t *req, char *buf, int len);
  int Get_CredentialNumEntries(dm_req_t *req, char *buf, int len);
 +int Validate_SecuredRoles(dm_req_t *req, char *value);
+ void ApplySearchExpressionPermissions(char *path, inst_sel_t *sel);
+ bool ValidateDataModelPathSegment(char *segment, bool is_last, char *path);
+ 
+@@ -293,6 +294,9 @@ int DEVICE_CTRUST_Init(void)
+     // Create a timer which will be used to apply all modified permissions to the data model, after processing a USP Message
+     SYNC_TIMER_Add(ApplyModifiedPermissions, 0, END_OF_TIME);
  
- #ifndef REMOVE_DEVICE_SECURITY
- int InitChallengeTable();
-@@ -354,6 +355,10 @@ int DEVICE_CTRUST_Init(void)
-                         challenge_response_input_args, NUM_ELEM(challenge_response_input_args),
-                         NULL, 0);
- #endif
-+
 +    // Register Device.LocalAgent.ControllerTrust.SecuredRoles parameter
 +    err |= USP_REGISTER_DBParam_ReadWrite(DEVICE_CTRUST_ROOT ".SecuredRoles", "", Validate_SecuredRoles, NULL, DM_STRING);
 +
-     // Exit if any errors occurred
-     if (err != USP_ERR_OK)
-     {
-@@ -2908,3 +2913,139 @@ exit:
+     // Register parameters implemented by this component
+     // Device.LocalAgent.ControllerTrust.Role.{i}
+     err |= USP_REGISTER_Object(DEVICE_ROLE_ROOT, ValidateAdd_CTrustRole, NULL, Notify_CTrustRoleAdded,
+@@ -3533,3 +3537,139 @@ exit:
      return err;
  }
  #endif // REMOVE_DEVICE_SECURITY

obuspa/patches/1000-suppress-logs.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.2/src/core/cli_server.c
+Index: obuspa-10.0.7.0/src/core/cli_server.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/cli_server.c
-+++ obuspa-10.0.0.2/src/core/cli_server.c
-@@ -724,10 +724,6 @@ int ExecuteCli_Get(str_vector_t *args)
+--- obuspa-10.0.7.0.orig/src/core/cli_server.c
++++ obuspa-10.0.7.0/src/core/cli_server.c
+@@ -726,10 +726,6 @@ int ExecuteCli_Get(str_vector_t *args)
              USP_ASSERT(gge->value != NULL);
              SendCliResponse("%s => %s\n", gge->path, gge->value);
          }
@@ -13,11 +13,11 @@ Index: obuspa-10.0.0.2/src/core/cli_server.c
      }
  
      GROUP_GET_VECTOR_Destroy(&ggv);
-Index: obuspa-10.0.0.2/src/core/data_model.c
+Index: obuspa-10.0.7.0/src/core/data_model.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/data_model.c
-+++ obuspa-10.0.0.2/src/core/data_model.c
-@@ -1321,7 +1321,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
+--- obuspa-10.0.7.0.orig/src/core/data_model.c
++++ obuspa-10.0.7.0/src/core/data_model.c
+@@ -1398,7 +1398,7 @@ int DATA_MODEL_NotifyInstanceAdded(char
      // Exit if instance already exists - nothing to do
      if (exists)
      {
@@ -26,7 +26,7 @@ Index: obuspa-10.0.0.2/src/core/data_model.c
          return USP_ERR_CREATION_FAILURE;
      }
  
-@@ -1409,7 +1409,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
+@@ -1486,7 +1486,7 @@ int DATA_MODEL_NotifyInstanceDeleted(cha
      // Exit if instance does not exist - nothing to do
      if (exists == false)
      {
@@ -35,11 +35,11 @@ Index: obuspa-10.0.0.2/src/core/data_model.c
          return USP_ERR_OBJECT_DOES_NOT_EXIST;
      }
  
-diff --git a/src/core/mqtt.c b/src/core/mqtt.c
-index 388697a..444b4da 100644
---- a/src/core/mqtt.c
-+++ b/src/core/mqtt.c
-@@ -4020,7 +4020,7 @@ void MessageV5Callback(struct mosquitto *mosq, void *userdata, const struct mosq
+Index: obuspa-10.0.7.0/src/core/mqtt.c
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/mqtt.c
++++ obuspa-10.0.7.0/src/core/mqtt.c
+@@ -4070,7 +4070,7 @@ void MessageV5Callback(struct mosquitto
      if (mosquitto_property_read_string(props, RESPONSE_TOPIC,
              &response_info_ptr, false) == NULL)
      {

obuspa/patches/1001-use-datamodel-caching.patch

@@ -4,11 +4,11 @@ Date:   Wed Apr 30 17:18:27 2025 +0530
 
     1001-use-datamodel-caching.patch
 
-diff --git a/src/core/cli_server.c b/src/core/cli_server.c
-index da61c6f..abac7cb 100644
---- a/src/core/cli_server.c
-+++ b/src/core/cli_server.c
-@@ -511,6 +511,7 @@ int CLI_SERVER_ExecuteCliCommand(char *cmd_line)
+Index: obuspa-10.0.7.0/src/core/cli_server.c
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/cli_server.c
++++ obuspa-10.0.7.0/src/core/cli_server.c
+@@ -513,6 +513,7 @@ int CLI_SERVER_ExecuteCliCommand(char *c
          SendCliResponse("WARNING: Discarding unused args: %s\n", args.vector[cli_cmd->max_args+1]);
      }
  
@@ -16,7 +16,7 @@ index da61c6f..abac7cb 100644
      // Process command
      err = cli_cmd->exec_cmd(&args);
      print_help = false;
-@@ -670,6 +671,11 @@ int ExecuteCli_Version(str_vector_t *args)
+@@ -672,6 +673,11 @@ int ExecuteCli_Version(str_vector_t *arg
  int ExecuteCli_Get(str_vector_t *args)
  {
      combined_role_t *combined_role;
@@ -28,22 +28,22 @@ index da61c6f..abac7cb 100644
  #ifndef REMOVE_USP_BROKER
      char *arg1;
  
-diff --git a/src/core/data_model.h b/src/core/data_model.h
-index 7564127..2736d7c 100755
---- a/src/core/data_model.h
-+++ b/src/core/data_model.h
-@@ -405,5 +405,6 @@ int DM_PRIV_ReRegister_DBParam_Default(char *path, char *value);
+Index: obuspa-10.0.7.0/src/core/data_model.h
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/data_model.h
++++ obuspa-10.0.7.0/src/core/data_model.h
+@@ -417,5 +417,6 @@ int DM_PRIV_ReRegister_DBParam_Default(c
  bool DM_PRIV_IsChildNodeOf(dm_node_t *node, dm_node_t *parent_node);
  void DM_PRIV_GetAllEventsAndCommands(dm_node_t *node, str_vector_t *events, str_vector_t *commands);
  
 +int vendor_create_dm_cache(char *paths[], int num_paths);
  #endif
  
-diff --git a/src/core/handle_get.c b/src/core/handle_get.c
-index d9d3e9e..c263978 100644
---- a/src/core/handle_get.c
-+++ b/src/core/handle_get.c
-@@ -129,6 +129,7 @@ void MSG_HANDLER_HandleGet(Usp__Msg *usp, char *controller_endpoint, mtp_conn_t
+Index: obuspa-10.0.7.0/src/core/handle_get.c
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/handle_get.c
++++ obuspa-10.0.7.0/src/core/handle_get.c
+@@ -129,6 +129,7 @@ void MSG_HANDLER_HandleGet(Usp__Msg *usp
          goto exit;
      }
  
@@ -51,11 +51,11 @@ index d9d3e9e..c263978 100644
      // Calculate the number of hierarchical levels to traverse in the data model when performing partial path resolution
      // NOTE: protocol buffer has depth as an unsigned quantity, but internally we use a signed number, so limit range to that of a signed number
      depth = usp->body->request->get->max_depth;
-diff --git a/src/core/msg_handler.c b/src/core/msg_handler.c
-index 647591d..b7498d8 100755
---- a/src/core/msg_handler.c
-+++ b/src/core/msg_handler.c
-@@ -863,6 +863,8 @@ int HandleUspMessage(Usp__Msg *usp, char *endpoint_id, mtp_conn_t *mtpc)
+Index: obuspa-10.0.7.0/src/core/msg_handler.c
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/msg_handler.c
++++ obuspa-10.0.7.0/src/core/msg_handler.c
+@@ -987,6 +987,8 @@ int HandleUspMessage(Usp__Msg *usp, char
                  MSG_HANDLER_UspMsgTypeToString(usp->header->msg_type),
                  iso8601_cur_time(buf, sizeof(buf)) );
  

obuspa/patches/1002-mqtt-qos.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.1/src/core/device_bulkdata.c
+Index: obuspa-10.0.4.0/src/core/device_bulkdata.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/device_bulkdata.c
-+++ obuspa-10.0.0.1/src/core/device_bulkdata.c
-@@ -375,6 +375,8 @@ int DEVICE_BULKDATA_Init(void)
+--- obuspa-10.0.4.0.orig/src/core/device_bulkdata.c
++++ obuspa-10.0.4.0/src/core/device_bulkdata.c
+@@ -378,6 +378,8 @@ int DEVICE_BULKDATA_Init(void)
      // Device.BulkData.Profile.{i}.MQTT
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.MQTT.Reference", "", Validate_BulkDataMqttReference, NULL, DM_STRING);
      err |= USP_REGISTER_DBParam_ReadWrite("Device.BulkData.Profile.{i}.MQTT.PublishTopic", "", NULL, NULL, DM_STRING);

obuspa/patches/1003-ct-full-access-rename.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.2/src/core/data_model.c
+Index: obuspa-10.0.7.0/src/core/data_model.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/data_model.c
-+++ obuspa-10.0.0.2/src/core/data_model.c
-@@ -5347,7 +5347,7 @@ int RegisterDefaultControllerTrust(void)
+--- obuspa-10.0.7.0.orig/src/core/data_model.c
++++ obuspa-10.0.7.0/src/core/data_model.c
+@@ -5519,7 +5519,7 @@ int RegisterDefaultControllerTrust(void)
      int err = USP_ERR_OK;
  
      // Register 'Full Access' role

obuspa/patches/2001-validate-controller-mtp.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.2/src/core/device.h
+Index: obuspa-10.0.6.0/src/core/device.h
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/device.h
-+++ obuspa-10.0.0.2/src/core/device.h
-@@ -346,6 +346,10 @@ void DEVICE_CONTROLLER_SetInheritedRole(
+--- obuspa-10.0.6.0.orig/src/core/device.h
++++ obuspa-10.0.6.0/src/core/device.h
+@@ -355,6 +355,10 @@ void DEVICE_CONTROLLER_SetInheritedRole(
  int DEVICE_CONTROLLER_CountEnabledWebsockClientConnections(void);
  #endif
  
@@ -13,11 +13,11 @@ Index: obuspa-10.0.0.2/src/core/device.h
  #ifndef REMOVE_USP_BROKER
  int DEVICE_SUBSCRIPTION_RouteNotification(Usp__Msg *usp, int instance, char *subscribed_path);
  bool DEVICE_SUBSCRIPTION_MarkVendorLayerSubs(int broker_instance, subs_notify_t notify_type, char *path, int group_id);
-Index: obuspa-10.0.0.2/src/core/device_controller.c
+Index: obuspa-10.0.6.0/src/core/device_controller.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/device_controller.c
-+++ obuspa-10.0.0.2/src/core/device_controller.c
-@@ -968,6 +968,78 @@ int DEVICE_CONTROLLER_QueueBinaryMessage
+--- obuspa-10.0.6.0.orig/src/core/device_controller.c
++++ obuspa-10.0.6.0/src/core/device_controller.c
+@@ -969,6 +969,78 @@ int DEVICE_CONTROLLER_QueueBinaryMessage
      return USP_ERR_OK;
  }
  
@@ -96,11 +96,11 @@ Index: obuspa-10.0.0.2/src/core/device_controller.c
  /*********************************************************************//**
  **
  ** DEVICE_CONTROLLER_IsMTPConfigured
-Index: obuspa-10.0.0.2/src/core/msg_handler.c
+Index: obuspa-10.0.6.0/src/core/msg_handler.c
 ===================================================================
---- obuspa-10.0.0.2.orig/src/core/msg_handler.c
-+++ obuspa-10.0.0.2/src/core/msg_handler.c
-@@ -1220,6 +1220,15 @@ int ValidateUspRecord(UspRecord__Record
+--- obuspa-10.0.6.0.orig/src/core/msg_handler.c
++++ obuspa-10.0.6.0/src/core/msg_handler.c
+@@ -1344,6 +1344,15 @@ int ValidateUspRecord(UspRecord__Record
      usp_service_instance = USP_BROKER_GetUspServiceInstance(rec->from_id, 0);
  #endif
  

obuspa/patches/2002-max_controllers.patch

@@ -1,8 +1,8 @@
-Index: obuspa-10.0.0.1/src/core/mqtt.c
+Index: obuspa-10.0.6.0/src/core/mqtt.c
 ===================================================================
---- obuspa-10.0.0.1.orig/src/core/mqtt.c
-+++ obuspa-10.0.0.1/src/core/mqtt.c
-@@ -259,6 +259,8 @@ void MqttSubscriptionDestroy(mqtt_subscr
+--- obuspa-10.0.6.0.orig/src/core/mqtt.c
++++ obuspa-10.0.6.0/src/core/mqtt.c
+@@ -265,6 +265,8 @@ void SaveMqttPublishErrMsg(const char *f
  #define DEFINE_MQTT_TrustCertVerifyCallbackIndex(index) \
  int MQTT_TrustCertVerifyCallback_##index (int preverify_ok, X509_STORE_CTX *x509_ctx) \
  {\
@@ -11,7 +11,7 @@ Index: obuspa-10.0.0.1/src/core/mqtt.c
      return DEVICE_SECURITY_TrustCertVerifyCallbackWithCertChain(preverify_ok, x509_ctx, &mqtt_clients[index].cert_chain);\
  }
  
-@@ -269,6 +271,11 @@ DEFINE_MQTT_TrustCertVerifyCallbackIndex
+@@ -275,6 +277,11 @@ DEFINE_MQTT_TrustCertVerifyCallbackIndex
  DEFINE_MQTT_TrustCertVerifyCallbackIndex(2);
  DEFINE_MQTT_TrustCertVerifyCallbackIndex(3);
  DEFINE_MQTT_TrustCertVerifyCallbackIndex(4);
@@ -23,7 +23,7 @@ Index: obuspa-10.0.0.1/src/core/mqtt.c
  // Add more, with incrementing indexes here, if you change MAX_MQTT_CLIENTS
  
  //------------------------------------------------------------------------------------
-@@ -279,10 +286,15 @@ ssl_verify_callback_t* mqtt_verify_callb
+@@ -285,10 +292,15 @@ ssl_verify_callback_t* mqtt_verify_callb
      MQTT_TrustCertVerifyCallbackIndex(2),
      MQTT_TrustCertVerifyCallbackIndex(3),
      MQTT_TrustCertVerifyCallbackIndex(4),

obuspa/patches/2004-mqtt-dualstack-fallback.patch

@@ -1,7 +1,7 @@
-diff --git a/src/core/mqtt.c b/src/core/mqtt.c
-index 70978501b1..96119fe080 100644
---- a/src/core/mqtt.c
-+++ b/src/core/mqtt.c
+Index: obuspa-10.0.7.0/src/core/mqtt.c
+===================================================================
+--- obuspa-10.0.7.0.orig/src/core/mqtt.c
++++ obuspa-10.0.7.0/src/core/mqtt.c
 @@ -53,6 +53,7 @@
  #include <openssl/bio.h>
  #include <openssl/err.h>
@@ -10,7 +10,7 @@ index 70978501b1..96119fe080 100644
  #include <mosquitto.h>
  
  #include "mqtt.h"
-@@ -201,8 +202,9 @@ int EnableMosquitto(mqtt_client_t *client);
+@@ -206,8 +207,9 @@ int EnableMosquitto(mqtt_client_t *clien
  void SetupCallbacks(mqtt_client_t *client);
  void QueueUspConnectRecord_MQTT(mqtt_client_t *client, mtp_send_item_t *msi, char *controller_topic, time_t expiry_time);
  int SendQueueHead(mqtt_client_t *client);
@@ -21,7 +21,7 @@ index 70978501b1..96119fe080 100644
  int ConnectSetEncryption(mqtt_client_t *client);
  void ConnectCallback(struct mosquitto *mosq, void *userdata, int result);
  void ConnectV5Callback(struct mosquitto *mosq, void *userdata, int result, int flags, const mosquitto_property *props);
-@@ -245,7 +247,7 @@ void HandleMqttReconnect(mqtt_client_t *client);
+@@ -250,7 +252,7 @@ void HandleMqttReconnect(mqtt_client_t *
  void HandleMqttReconnectAfterDisconnect(mqtt_client_t *client);
  void HandleMqttDisconnect(mqtt_client_t *client);
  void DisconnectIfAllSubscriptionsFailed(mqtt_client_t *client);
@@ -30,7 +30,7 @@ index 70978501b1..96119fe080 100644
  void RemoveMqttQueueItem(mqtt_client_t *client, mqtt_send_item_t *queued_msg);
  void RemoveExpiredMqttMessages(mqtt_client_t *client);
  void ParseSubscribeTopicsFromConnack(mqtt_client_t *client, mosquitto_property *prop);
-@@ -2350,6 +2352,143 @@ int SendQueueHead(mqtt_client_t *client)
+@@ -2380,6 +2382,143 @@ int SendQueueHead(mqtt_client_t *client)
      return err;
  }
  
@@ -174,7 +174,7 @@ index 70978501b1..96119fe080 100644
  /*********************************************************************//**
  **
  ** IsMqttBrokerUp
-@@ -2364,109 +2503,92 @@ int SendQueueHead(mqtt_client_t *client)
+@@ -2394,109 +2533,92 @@ int SendQueueHead(mqtt_client_t *client)
  ** \return  true if the MQTT Broker is up, false otherwise
  **
  **************************************************************************/
@@ -343,7 +343,7 @@ index 70978501b1..96119fe080 100644
      }
  
      return result;
-@@ -2487,18 +2609,20 @@ void Connect(mqtt_client_t *client)
+@@ -2517,18 +2639,20 @@ void Connect(mqtt_client_t *client)
  {
      int err = USP_ERR_OK;
      bool is_up;
@@ -367,7 +367,7 @@ index 70978501b1..96119fe080 100644
  
      // Exit if failed to connect
      if (err != USP_ERR_OK)
-@@ -2531,7 +2655,7 @@ exit:
+@@ -2561,7 +2685,7 @@ exit:
  ** \return  USP_ERR_INTERNAL_ERROR if failed to connect (and should retry)
  **
  **************************************************************************/
@@ -376,7 +376,7 @@ index 70978501b1..96119fe080 100644
  {
      int version;
      mosquitto_property *proplist = NULL;
-@@ -2601,19 +2725,19 @@ int PerformMqttClientConnect(mqtt_client_t *client)
+@@ -2631,19 +2755,19 @@ int PerformMqttClientConnect(mqtt_client
      // We do this to prevent the data model thread from potentially being blocked, whilst the connect call is taking place
      OS_UTILS_UnlockMutex(&mqtt_access_mutex);
  

obuspa/patches/2005-set-sql-journal-mode.patch

@@ -0,0 +1,28 @@
+diff --git a/src/core/database.c b/src/core/database.c
+index 7ad9dae..edebd7c 100644
+--- a/src/core/database.c
++++ b/src/core/database.c
+@@ -955,6 +955,7 @@ void DATABASE_Dump(void)
+ int OpenUspDatabase(char *db_file)
+ {
+     int err;
++    char *err_msg = 0;
+ 
+     // Exit if unable to open the database
+     err = sqlite3_open(db_file, &db_handle);
+@@ -965,6 +966,15 @@ int OpenUspDatabase(char *db_file)
+         return USP_ERR_INTERNAL_ERROR;
+     }
+ 
++    // Execute the PRAGMA statement
++    const char *sql = "PRAGMA journal_mode = MEMORY;";
++    err = sqlite3_exec(db_handle, sql, 0, 0, &err_msg);
++    if (err != SQLITE_OK) {
++        USP_LOG_Error("%s: Failed to set journal_mode: %s", __func__, err_msg);
++        sqlite3_free(err_msg);
++        return USP_ERR_INTERNAL_ERROR;
++    }
++
+     // Exit if unable to create the data model parameter table (if it does not already exist)
+     #define CREATE_TABLE_STR "create table if not exists data_model (hash integer, instances text, value text, primary key (hash, instances));"
+     err = sqlite3_exec(db_handle, CREATE_TABLE_STR, NULL, NULL, NULL);

obuspa/patches/2006-force-db-update.patch

@@ -0,0 +1,23 @@
+diff --git a/src/core/database.c b/src/core/database.c
+index 7ad9dae..0bf9c90 100644
+--- a/src/core/database.c
++++ b/src/core/database.c
+@@ -1479,3 +1479,7 @@ int GetAllEntriesForParameter(db_hash_t hash, kv_vector_t *kvv)
+     return result;
+ }
+ 
++void DATABASE_force_reset_file()
++{
++    schedule_factory_reset_init = true;
++}
+diff --git a/src/core/database.h b/src/core/database.h
+index c88cf3a..376aa7a 100644
+--- a/src/core/database.h
++++ b/src/core/database.h
+@@ -67,5 +67,6 @@ void DATABASE_Dump(void);
+ int DATABASE_ReadDataModelInstanceNumbers(bool remove_unknown_params);
+ db_hash_t DATABASE_GetMigratedHash(db_hash_t hash);
+ 
++void DATABASE_force_reset_file();
+ #endif
+ 

packet-capture-diagnostics/files/scripts/packetcapture

@@ -97,15 +97,13 @@ packet_capture_launch() {
 	fi
 
 	if [ -n "${interface}" ]; then
-		intf=$(ifstatus "${interface}" | jq ".l3_device")
+		intf=$(ifstatus "${interface}" | jsonfilter -e '$.l3_device')
 
 		if [ -z "${intf}" ]; then
 			# Error
 			packet_capture_error "Error_Internal" "${proto}"
 			return
 		fi
-
-		intf=$(eval echo "${intf}")
 	fi
 
 	cmd="timeout ${duration} tcpdump -w ${filename}"

parental-control/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=parental-control
-PKG_VERSION:=1.3.1
+PKG_VERSION:=1.4.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/parental-control.git
-PKG_SOURCE_VERSION:=b1e5b3f81f08271bdaf9cb4bda8a7696a27be3c6
+PKG_SOURCE_VERSION:=f7ec652c763bf6ffd550bf7d51b2c125774b79af
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

parental-control/files/etc/init.d/parentalcontrol

@@ -12,7 +12,9 @@ validate_global_section() {
 	uci_validate_section parentalcontrol globals globals \
 	    'enable:bool:1' \
 	    'loglevel:uinteger:3' \
+	    'queue_num:uinteger:53' \
 	    'bundle_path:string' \
+	    'default_wan_interface:string:wan' \
 	    'urlfilter:bool'
 }
 
@@ -24,11 +26,12 @@ remove_fw_rules() {
 }
 
 configure_fw_rules() {
-	local enable urlfilter
+	local enable urlfilter queue_num
 
 	config_load parentalcontrol
 	config_get_bool enable globals enable 0
 	config_get_bool urlfilter globals urlfilter 0
+	config_get queue_num globals queue_num 53
 
 	remove_fw_rules
 
@@ -37,6 +40,11 @@ configure_fw_rules() {
 		return 0
 	fi
 
+	if [ "${queue_num}" -lt 0 ] || [ "${queue_num}" -gt 65535 ]; then
+	        log "ERROR: queue_num not in 0-65535"
+		return 1
+	fi
+
 	if [ "${urlfilter}" -eq "1" ]; then
 		if [ ! -f "${OVERRIDE_JSON}" ]; then
 			# throw error
@@ -48,11 +56,11 @@ configure_fw_rules() {
 				hw_nat -! > /dev/null 2>&1
 			fi
 			if which conntrack > /dev/null 2>&1; then
-				conntrack -F > /dev/null 2>&1
+				flush_conntrack_for_hosts
 			fi
 
 			# this is for urlfilter daemon
-			add_iptables_nfqueue_rules
+			add_iptables_nfqueue_rules "$queue_num"
 		fi
 	fi
 
@@ -107,7 +115,7 @@ start_service() {
 
 	procd_open_instance "parentalcontrol"
 	procd_set_param command nice -n 10 "${PROG}"  # Lower priority
-	procd_append_param command -l ${loglevel}
+	procd_append_param command -l "${loglevel}"
 	procd_set_param respawn
 	procd_close_instance
 }
@@ -120,11 +128,19 @@ stop_service() {
 }
 
 reload_service() {
+	local arg="$1"
+
 	ret=$(ubus call service list '{"name":"parentalcontrol"}' | jsonfilter -qe '@.parentalcontrol.instances.parentalcontrol.running')
 	if [ "$ret" != "true" ]; then
 		stop
 		start
 	else
+		if [ "$arg" = "network" ]; then
+			pidof_sync="$(pidof sync_bundles.sh)"
+			[ -n "$pidof_sync" ] && kill "$pidof_sync"
+			sleep 5
+		fi
+
 		configure_fw_rules
 		copy_dhcp_leases
 		ubus send parentalcontrol.reload
@@ -132,6 +148,19 @@ reload_service() {
 }
 
 service_triggers() {
+	local enable urlfilter default_wan_interface 
+
+	validate_global_section || {
+		return 1
+	}
+
+	if [ "${urlfilter}" = "1" ] && [ "$enable" = "1" ] && [ -n "$default_wan_interface" ]; then
+		log "Adding interface trigger for $default_wan_interface"
+		procd_open_trigger
+		procd_add_interface_trigger "interface.*.up" "$default_wan_interface" /etc/init.d/parentalcontrol reload "network"
+		procd_close_trigger
+	fi
+
 	procd_add_reload_trigger "parentalcontrol"
 	procd_add_reload_trigger "schedules"
 }

parental-control/files/lib/parentalcontrol/parentalcontrol.sh

@@ -438,102 +438,118 @@ add_internet_schedule_rules() {
 }
 
 add_iptables_nfqueue_rules() {
-	local filter_used
+    local queue_num="$1"
 
-	# Check if urlfilter used
-	if ! uci show parentalcontrol | grep -q profile_urlfilter; then
-		return
-	fi
+    # Check if urlfilter used
+    if ! uci show parentalcontrol | grep -q profile_urlfilter; then
+        return
+    fi
 
-	# IPv4 rules
-	iptables -w -nL FORWARD | grep -iqE "NFQUEUE"
-	if [ "$?" -ne 0 ]; then
-		# capture DNS responses (UDP/TCP sport 53) in FORWARD
-		iptables -w -I FORWARD 1 -p tcp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -I FORWARD 1 -p udp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
+    # IPv4
+    # FORWARD
+    if ! iptables -w -nL | grep -q "URLFILTER_FORWARD"; then
+        iptables -w -N URLFILTER_FORWARD
+        iptables -w -I FORWARD 1 -j URLFILTER_FORWARD
 
-		# INPUT: DNS replies to router, skip loopback
-		iptables -w -I INPUT 1 -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -I INPUT 1 -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
+        # capture DNS responses (sport 53)
+        iptables -w -A URLFILTER_FORWARD -p tcp --sport 53 -j NFQUEUE --queue-num $queue_num --queue-bypass
+        iptables -w -A URLFILTER_FORWARD -p udp --sport 53 -j NFQUEUE --queue-num $queue_num --queue-bypass
 
-		# OUTPUT: DNS replies from router, skip loopback
-		iptables -w -I OUTPUT 1 -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -I OUTPUT 1 -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
+        # HTTP/HTTPS flows
+        iptables -w -A URLFILTER_FORWARD -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num $queue_num --queue-bypass
+        iptables -w -A URLFILTER_FORWARD -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
 
-		# HTTP/HTTPS flows for urlfilter
-		iptables -w -I FORWARD 1 -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -I FORWARD 1 -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
+    # INPUT
+    if ! iptables -w -nL | grep -q "URLFILTER_INPUT"; then
+        iptables -w -N URLFILTER_INPUT
+        iptables -w -I INPUT 1 -j URLFILTER_INPUT
 
-		# disable acceleration for https packet so that they can be read by urlfilter
-		ebtables --concurrent -A FORWARD -p ip --ip-protocol 6 --ip-destination-port 443 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -A FORWARD -p ip --ip-protocol 6 --ip-source-port 53 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -A FORWARD -p ip --ip-protocol 17 --ip-source-port 53 -j SKIPLOG 2> /dev/null
-	fi
+        iptables -w -A URLFILTER_INPUT -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+        iptables -w -A URLFILTER_INPUT -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
 
-	# IPv6 rules
-	ip6tables -w -nL FORWARD | grep -iqE "NFQUEUE"
-	if [ "$?" -ne 0 ]; then
-		# capture DNS responses (UDP/TCP sport 53) in FORWARD
-		ip6tables -w -I FORWARD 1 -p tcp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -I FORWARD 1 -p udp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
+    # OUTPUT
+    if ! iptables -w -nL | grep -q "URLFILTER_OUTPUT"; then
+        iptables -w -N URLFILTER_OUTPUT
+        iptables -w -I OUTPUT 1 -j URLFILTER_OUTPUT
 
-		# INPUT: DNS replies to router, skip loopback
-		ip6tables -w -I INPUT 1 -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -I INPUT 1 -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
+        iptables -w -A URLFILTER_OUTPUT -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+        iptables -w -A URLFILTER_OUTPUT -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
 
-		# OUTPUT: DNS replies from router, skip loopback
-		ip6tables -w -I OUTPUT 1 -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -I OUTPUT 1 -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
+    # ebtables bypass for IPv4
+    ebtables --concurrent -A FORWARD -p ip --ip-protocol 6  --ip-destination-port 443 -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -A FORWARD -p ip --ip-protocol 6  --ip-source-port 53    -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -A FORWARD -p ip --ip-protocol 17 --ip-source-port 53    -j SKIPLOG 2>/dev/null
 
-		# HTTP/HTTPS flows for urlfilter
-		ip6tables -w -I FORWARD 1 -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -I FORWARD 1 -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
+    # IPv6
+    # FORWARD
+    if ! ip6tables -w -nL | grep -q "URLFILTER_FORWARD6"; then
+        ip6tables -w -N URLFILTER_FORWARD6
+        ip6tables -w -I FORWARD 1 -j URLFILTER_FORWARD6
 
-		# disable acceleration for https packet so that they can be read by urlfilter
-		ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 6 --ip6-destination-port 443 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 6 --ip6-source-port 53 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 17 --ip6-source-port 53 -j SKIPLOG 2> /dev/null
-	fi
+        ip6tables -w -A URLFILTER_FORWARD6 -p tcp --sport 53 -j NFQUEUE --queue-num $queue_num --queue-bypass
+        ip6tables -w -A URLFILTER_FORWARD6 -p udp --sport 53 -j NFQUEUE --queue-num $queue_num --queue-bypass
+
+        ip6tables -w -A URLFILTER_FORWARD6 -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num $queue_num --queue-bypass
+        ip6tables -w -A URLFILTER_FORWARD6 -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
+
+    # INPUT
+    if ! ip6tables -w -nL | grep -q "URLFILTER_INPUT6"; then
+        ip6tables -w -N URLFILTER_INPUT6
+        ip6tables -w -I INPUT 1 -j URLFILTER_INPUT6
+
+        ip6tables -w -A URLFILTER_INPUT6 -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+        ip6tables -w -A URLFILTER_INPUT6 -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
+
+    # OUTPUT
+    if ! ip6tables -w -nL | grep -q "URLFILTER_OUTPUT6"; then
+        ip6tables -w -N URLFILTER_OUTPUT6
+        ip6tables -w -I OUTPUT 1 -j URLFILTER_OUTPUT6
+
+        ip6tables -w -A URLFILTER_OUTPUT6 -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+        ip6tables -w -A URLFILTER_OUTPUT6 -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num $queue_num --queue-bypass
+    fi
+
+    # ebtables bypass for IPv6
+    ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 6  --ip6-destination-port 443 -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 6  --ip6-source-port 53    -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -A FORWARD -p ip6 --ip6-protocol 17 --ip6-source-port 53    -j SKIPLOG 2>/dev/null
 }
 
 remove_iptables_nfqueue_rules() {
-	iptables -w -nL FORWARD | grep -iqE "NFQUEUE"
-	if [ "$?" -eq 0 ]; then
-		# DNS response rules
-		iptables -w -D FORWARD -p tcp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D FORWARD -p udp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D INPUT  -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D INPUT  -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D OUTPUT -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D OUTPUT -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
+    # IPv4
+    for chain in URLFILTER_FORWARD URLFILTER_INPUT URLFILTER_OUTPUT; do
+        if iptables -w -nL | grep -q "$chain"; then
+            iptables -w -D FORWARD -j $chain 2>/dev/null
+            iptables -w -D INPUT   -j $chain 2>/dev/null
+            iptables -w -D OUTPUT  -j $chain 2>/dev/null
+            iptables -w -F $chain
+            iptables -w -X $chain
+        fi
+    done
 
-		# HTTP/HTTPS
-		iptables -w -D FORWARD -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
-		iptables -w -D FORWARD -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
+    ebtables --concurrent -D FORWARD -p ip --ip-protocol 6  --ip-destination-port 443 -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -D FORWARD -p ip --ip-protocol 6  --ip-source-port 53    -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -D FORWARD -p ip --ip-protocol 17 --ip-source-port 53    -j SKIPLOG 2>/dev/null
 
-		ebtables --concurrent -D FORWARD -p ip --ip-protocol 6 --ip-destination-port 443 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -D FORWARD -p ip --ip-protocol 6 --ip-source-port 53 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -D FORWARD -p ip --ip-protocol 17 --ip-source-port 53 -j SKIPLOG 2> /dev/null
-	fi
+    # IPv6
+    for chain in URLFILTER_FORWARD6 URLFILTER_INPUT6 URLFILTER_OUTPUT6; do
+        if ip6tables -w -nL | grep -q "$chain"; then
+            ip6tables -w -D FORWARD -j $chain 2>/dev/null
+            ip6tables -w -D INPUT   -j $chain 2>/dev/null
+            ip6tables -w -D OUTPUT  -j $chain 2>/dev/null
+            ip6tables -w -F $chain
+            ip6tables -w -X $chain
+        fi
+    done
 
-	ip6tables -w -nL FORWARD | grep -iqE "NFQUEUE"
-	if [ "$?" -eq 0 ]; then
-		# DNS response rules
-		ip6tables -w -D FORWARD -p tcp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D FORWARD -p udp --sport 53 -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D INPUT  -p tcp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D INPUT  -p udp --sport 53 ! -i lo -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D OUTPUT -p tcp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D OUTPUT -p udp --sport 53 ! -o lo -j NFQUEUE --queue-num 0 --queue-bypass
-
-		# HTTP/HTTPS
-		ip6tables -w -D FORWARD -p tcp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
-		ip6tables -w -D FORWARD -p udp --match multiport --ports 80,443 -j NFQUEUE --queue-num 0 --queue-bypass
-
-		ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 6 --ip6-destination-port 443 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 6 --ip6-source-port 53 -j SKIPLOG 2> /dev/null
-		ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 17 --ip6-source-port 53 -j SKIPLOG 2> /dev/null
-	fi
+    ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 6  --ip6-destination-port 443 -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 6  --ip6-source-port 53    -j SKIPLOG 2>/dev/null
+    ebtables --concurrent -D FORWARD -p ip6 --ip6-protocol 17 --ip6-source-port 53    -j SKIPLOG 2>/dev/null
 }
 
 remove_internet_schedule_rules() {
@@ -551,6 +567,62 @@ remove_internet_schedule_rules() {
 	fi
 }
 
+# Global array for resolved IPs
+URLFILTER_IPS=""
+
+# Resolve hostname or MAC to IP from lease_file
+get_host_ip() {
+	local host="$1"
+	local ip
+	local lease_file="/tmp/dhcp.leases"
+
+	[ -f "$lease_file" ] || lease_file="/etc/parentalcontrol/dhcp.leases"
+	[ -f "$lease_file" ] || { log "Error: get_host_ip(): No DHCP lease file found."; return 1; }
+
+	# try DHCP lease lookup
+	ip="$(awk -v h="$host" '
+	{
+		mac=$2; ipaddr=$3; name=$4
+		if (h == name || h == mac) { print ipaddr; exit }
+	}' "$lease_file")"
+
+	[ -n "$ip" ] && URLFILTER_IPS="$URLFILTER_IPS $ip"
+}
+
+# Process each profile section
+resolve_profile_hosts() {
+	local section="$1"
+	local hostlist
+
+	config_get hostlist "$section" host
+	[ -z "$hostlist" ] && return
+
+	for h in $hostlist; do
+		get_host_ip "$h"
+	done
+}
+
+# Main function to collect IPs and delete conntrack entries
+flush_conntrack_for_hosts() {
+	URLFILTER_IPS=""
+	local count max
+
+	config_foreach resolve_profile_hosts profile
+
+	URLFILTER_IPS="$(echo "$URLFILTER_IPS" | tr ' ' '\n' | sort -u | xargs)"
+	for ip in $URLFILTER_IPS; do
+		count=0
+		max=1000
+		while conntrack -D -s "$ip" >/dev/null 2>&1; do
+			count=$((count+1))
+			if [ $count -ge $max ]; then
+				log "Warning: Forced to stop conntrack delete after $max deletions for $ip (possible loop)"
+				break
+			fi
+		done
+	done
+}
+
 OVERRIDE_JSON="/etc/parentalcontrol/urlbundle_override.json"
 DM_PLUGIN_PATH="/usr/share/bbfdm/micro_services/parentalcontrol/urlbundle_override.json"
 

parental-control/files/lib/parentalcontrol/sync_bundles.sh

@@ -161,7 +161,23 @@ handle_download_url() {
 		# If the URL is HTTP, fetch the file size
 		local bundle_file_size
 		if echo "$sanitized_url" | grep -qE "^https?://"; then
-			bundle_file_size="$(curl -I "$sanitized_url" 2>&1 | grep -i 'content-length' | cut -d: -f2 | xargs)"
+			bundle_file_header="$(curl -Is --max-time 30 "$sanitized_url" 2>/var/log/urlfilter_curl_err.log)"
+			curl_rc=$?
+
+			case $curl_rc in
+				0)
+					# Success
+					;;
+				6|7|28|35|52|55|56)
+					log_info "handle_download_url: URL not reachable (curl rc=$curl_rc): ${sanitized_url}"
+					return 1
+					;;
+				*)
+					log_info "handle_download_url: unexpected curl rc=$curl_rc for ${sanitized_url}"
+					;;
+			esac
+
+			bundle_file_size="$(echo "$bundle_file_header" | grep -i 'content-length' | cut -d: -f2 | xargs)"
 			[ -z "$bundle_file_size" ] && bundle_file_size=0
 		else
 			# If it's a file:// URL, get the file size from the filesystem

passwdqc/Makefile

@@ -30,7 +30,7 @@ define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR) \
 		CC="$(TARGET_CC)" \
 		LDFLAGS="$(TARGET_LDFLAGS)" \
-		pam_wrapped
+		all_wrapped
 endef
 
 define Package/$(PKG_NAME)/install
@@ -40,8 +40,8 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/lib/security
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/pam_passwdqc.so $(1)/usr/lib/security/
 
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/passwdqc.uci_default $(1)/etc/uci-defaults/99-add_passwdqc_pam
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/pwqcheck $(1)/usr/sbin/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

passwdqc/files/passwdqc.uci_default

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-CONFIG_FILE="/etc/pam.d/common-password"
-# for some reason setting to 8 makes passwdqc accept minimum 12 letter password with this configuration
-# if we set it to 12 then we need atleast 16 characters and so on
-# passphrase = 0 means no space separated words
-# rest can be figured out from passwdqc man page
-MODULE_LINE="password requisite pam_passwdqc.so min=disabled,disabled,disabled,disabled,8 max=20 passphrase=0 retry=3 enforce=everyone"
-
-# Ensure the file exists before modifying
-[ -f "$CONFIG_FILE" ] || exit 0
-
-# Check if pam_passwdqc is already in the file
-if ! grep -q "pam_passwdqc.so" "$CONFIG_FILE"; then
-    # Insert before pam_unix.so
-    sed -i "/pam_unix.so/ i\\$MODULE_LINE" "$CONFIG_FILE"
-fi
-
-exit 0

periodicstats/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=periodicstats
-PKG_VERSION:=1.5.18
+PKG_VERSION:=1.6.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/periodicstats.git
-PKG_SOURCE_VERSION:=2772d77bd477adfdf513499fda11397107996d21
+PKG_SOURCE_VERSION:=351db77e982b1f4887e5878345fe98be72d262fb
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

peripheral_manager/Makefile

@@ -1,60 +0,0 @@
-#
-# Copyright (C) 2019 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=peripheral_manager
-PKG_VERSION:=1.0.6
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=21522c2003b8c61904acc61ff97e54fc9b0c3c92
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/peripheral_manager
-	CATEGORY:=Utilities
-	TITLE:=Application deamon for handling of peripheral
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json
-endef
-
-define Package/peripheral_manager/description
-	Application handling peripheral
-endef
-
-CMAKE_OPTIONS +=  \
-		-DCMAKE_BUILD_TYPE:String="Release" \
-
-define Package/peripheral_manager/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/peripheral_manager $(1)/sbin/
-#	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/gpio_test $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,peripheral_manager))