Event catch for Led blinking

-------------------------------------------------------------------------------
* 4c20476 libwifi: remove dependency on unused netlink route
-------------------------------------------------------------------------------
commit 4c204761a38a27ff9ff7021c3c34b92d7e3fdb84
Author: Anjan Chanda <anjan.chanda@iopsys.eu>
Date: 2019-08-15 11:54:00 +0200

    libwifi: remove dependency on unused netlink route

Base directory -> /
 libwifi/wifi.c | 1 -
 1 file changed, 1 deletion(-)
-------------------------------------------------------------------------------

ated/Makefile

@@ -1,15 +1,8 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+# Copyright (C) 2016 inteno
 #
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -27,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -1,27 +0,0 @@
-if PACKAGE_libbbfdm
-
-config LIBBBFDM_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-
-config BBF_TR181
-	bool "Compile with tr181 device features"
-	default y
-
-config BBF_TR104
-	bool "Compile with tr104 voice features"
-	default y
-
-config BBF_TR143
-	bool "Compile with tr143 diagnostics features"
-	default y
-
-config BBF_TR157
-	bool "Compile with tr157 bulkdata collector features"
-	default y
-	
-config BBF_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

bbf/Makefile

@@ -1,88 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=1.0-2019-11-02
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a33b47b9c34bdd174e39b54525b082259c60850c
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm/description
- Test description will update later.
-endef
-
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_BBF_TR157),y)
-CONFIGURE_ARGS += \
-	--enable-tr157
-endif
-
-ifeq ($(CONFIG_BBF_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-tr064
-endif
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libbbfdm))

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

crashlog/Makefile

@@ -1,18 +1,9 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

dectmngr2/Makefile

@@ -1,20 +1,19 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=1.3.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_SOURCE_VERSION:=5a5c94b289c79bc3a635b8d742dd9b73dcc0615f
 PKG_NAME:=dectmngr2
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
 export BUILD_DIR
@@ -30,7 +29,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent endptmngr
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
 endef
 
 define Package/dectmngr2/description

dslmngr/Makefile

@@ -19,9 +19,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 
 include $(INCLUDE_DIR)/package.mk
 

easy-qos/Makefile

@@ -1,29 +1,19 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
+PKG_VERSION:=1.0
 PKG_RELEASE:=0
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
 endef
 
 define Package/easy-qos/description
-	This package contains Easy QoS utility
+	This package contains Easy QoS utitie
 endef
 
 define Build/Prepare
@@ -39,11 +29,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,165 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string:none' \
-		'macaddr:string:none' \
-		'proto:string:none' \
-		'port:list(uinteger):none' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-	if [ "${ports}" != "none" ]; then
-		IFS=","
-		for port in ${ports};
-		do
-			cmd="--dport ${port}:${port} ${cmd}";
-		done
-		IFS=' '
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_log classcfg ${cmd} 
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -102,7 +102,7 @@ manage_rule() {
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num} ${p}
 				create_rule udp ${macaddr} ${prio_num} ${p}
 			else
@@ -111,7 +111,7 @@ manage_rule() {
 		done
 		# Create rule for all ports if port is not mentioned in uci
 		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+			if [ "${protocol}" == "none" ]; then
 				create_rule tcp ${macaddr} ${prio_num}
 				create_rule udp ${macaddr} ${prio_num}
 			else

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -158,7 +158,7 @@ manage_rule() {
 	port_list=$(echo ${port}|sed 's/ /,/g')
 
 	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+		if [ "${proto}" == "none" ]; then
 			create_rule tcp ${ip} ${prio_num} ${port_list}
 			create_rule udp ${ip} ${prio_num} ${port_list}
 		else

easy-soc-libs/Makefile

@@ -1,29 +1,24 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2018 Iopsys
 #
-# This is free software, licensed under the GNU General Public License v2.
-# 
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.4.1
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=63f749faa67670229a5cbaf39ee0fef92d8276f3
+PKG_SOURCE_VERSION:=4c204761a38a27ff9ff7021c3c34b92d7e3fdb84
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/easy-soc-libs
@@ -42,7 +37,7 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
 endef
 
 define Package/libethernet
@@ -82,7 +77,7 @@ endif
 define Package/libdsl
   $(call Package/easy-soc-libs)
   TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
 endef
 
 subdirs := \
@@ -112,7 +107,7 @@ define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
 
 define Build/InstallDev/libdsl
@@ -142,7 +137,7 @@ endef
 
 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
 endef
 
 define Package/libethernet/install
@@ -162,4 +157,3 @@ endef
 $(eval $(call BuildPackage,libwifi))
 $(eval $(call BuildPackage,libdsl))
 $(eval $(call BuildPackage,libethernet))
-$(eval $(call BuildPackage,easy-soc-libs))

endptmngr/Makefile

@@ -1,23 +1,22 @@
 #
-# Copyright (C) 2018 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
+PKG_SOURCE_VERSION:=631e61b7ab5d86f2f4c86756a117badff9fb0f2c
+
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=endptmngr-open
-PATCH_DIR:=
 else
 PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
 PKG_SOURCE_PROTO:=git
@@ -42,7 +41,7 @@ define Package/endptmngr
   CATEGORY:=Utilities
   TITLE:=Brcmslic
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent @(PACKAGE_bcmkernel||PACKAGE_bcmopen) @TARGET_HAS_VOICE
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
 endef
 
 define Package/endptmngr/description

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@dev.iopsys.eu:3rdparty/gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=GPLv2
+  PKG_LICENSE:=Genexis
   PKG_LICENSE_URL:=
 endef
 

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/files/ice-client.uci_default

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+grep -rq "^ice:" /etc/passwd || {
+	adduser -D -H -s /bin/false ice
+}
+
+uci -q delete passwords.ice
+uci -q set passwords.ice=usertype
+uci -q set passwords.ice.password="\$WPAKEY"
+uci -q del_list passwords.ice._access_w=root
+uci -q add_list passwords.ice._access_w=root
+uci -q del_list passwords.ice._access_r=root
+uci -q add_list passwords.ice._access_r=root
+uci -q commit passwords
+
+uci show rpcd | grep username=.*ice.* >/dev/null || {
+cat >> /etc/config/rpcd << EOF
+
+config login
+	option username 'ice'
+	option password '\$p\$ice'
+	list _access_w 'none'
+	list write 'user-user'
+	list write 'juci-broadcom-dsl'
+	list write 'juci-broadcom-dsl-admin'
+	list write 'juci-broadcom-ethernet'
+	list write 'juci-broadcom-iptv'
+	list write 'juci-broadcom-vlan'
+	list write 'juci-broadcom-vlan-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
+	list write 'juci-catv'
+	list write 'juci-ddns'
+	list write 'juci-diagnostics'
+	list write 'juci-dnsmasq-dhcp'
+	list write 'juci-dropbear'
+	list write 'juci-ethernet'
+	list write 'juci-event'
+	list write 'juci-firewall-fw3'
+	list write 'juci-iconnect'
+	list write 'juci-igmpinfo'
+	list write 'juci-inteno-backup'
+	list write 'juci-inteno-multiwan'
+	list write 'juci-inteno-provisioning'
+	list write 'juci-inteno-qos'
+	list write 'juci-inteno-voice-client'
+	list write 'juci-minidlna'
+	list write 'juci-mod-status'
+	list write 'juci-mod-system'
+	list write 'juci-natalie-dect'
+	list write 'juci-netmode'
+	list write 'juci-network-netifd'
+	list write 'juci-owsd'
+	list write 'juci-printer'
+	list write 'juci-realtime-graphs'
+	list write 'juci-samba'
+	list write 'juci-sfp'
+	list write 'juci-snmpd'
+	list write 'juci-sysupgrade'
+	list write 'juci-uhttpd'
+	list write 'juci-upnp'
+	list write 'juci-usb'
+	list write 'core'
+	list write 'unauthenticated'
+
+EOF
+}
+
+uci -q del_list dhcp.@domain[0].name="inteno.lan"
+uci -q add_list dhcp.@domain[0].name="inteno.lan"
+uci -q commit dhcp
+
+exit 0
+

icgroupd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2016 Inteno Broadband AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.

icwmp/Config_cwmp.in

@@ -19,9 +19,17 @@ config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+config XMPP_ENABLE
+	bool "enable xmpp feature"
+	default n
+
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
+
+config LIBDATAMODEL_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
     
 endif
 

icwmp/Config_datamodel.in

@@ -0,0 +1,7 @@
+if PACKAGE_libdatamodel
+
+config UPNP_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,17 +8,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-10-17
+PKG_VERSION:=4.0-2019-08-17
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9cfbfa9a381d372643fe18f8c258779bed3ee3bd
+PKG_SOURCE_VERSION:=17b9e07a38753eab3964dffd0b0cc7da3118840a
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -32,6 +30,13 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
+define Package/libdatamodel
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
 define Package/icwmp_stun
 	SECTION:=utils
 	CATEGORY:=Utilities
@@ -60,18 +65,11 @@ define Package/icwmp_udpechoserver
 	DEPENDS:=+libuci
 endef
 
-define Package/icwmp_bulkdata
- SECTION:=utils
- CATEGORY:=Utilities
- TITLE:=TR-069 BulkData Collection
- DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm +libtr098
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
 endef
 
 define Package/icwmp/description
@@ -96,6 +94,10 @@ define Package/icwmp-zstream/config
 	source "$(SOURCE)/Config_cwmp.in"
 endef
 
+define Package/libdatamodel/config
+	source "$(SOURCE)/Config_datamodel.in"
+endef
+
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -107,6 +109,8 @@ ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 TARGET_CFLAGS += -DEX400
 endif
 
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
+
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -127,6 +131,16 @@ CONFIGURE_ARGS += \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
 	
+ifeq ($(CONFIG_UPNP_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-upnptr064
+endif
+	
+ifeq ($(CONFIG_XMPP_ENABLE),y)
+CONFIGURE_ARGS += \
+	--enable-xmpp
+endif
+	
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -158,23 +172,18 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-CONFIGURE_ARGS += \
-	--enable-tr098
-endif
-
-CONFIGURE_ARGS += \
-	--enable-tr181
+define Package/libdatamodel/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
+endef
 
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
-ifeq ($(CONFIG_PACKAGE_libtr098),y)
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
-endif
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
@@ -227,15 +236,17 @@ define Package/icwmp_twamp/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
 endef
 
-define Package/icwmp_bulkdata/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
 endef
 
+
 define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
 	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
@@ -255,9 +266,11 @@ define Package/icwmp-$(BUILD_VARIANT)/prerm
 	exit 0
 endef
 
+
 $(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
 $(eval $(call BuildPackage,icwmp_udpechoserver))
 $(eval $(call BuildPackage,icwmp_twamp))
-$(eval $(call BuildPackage,icwmp_bulkdata))
+$(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -41,14 +41,4 @@ set_cwmp_reqopts() {
 	fi
 }
 
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
 set_cwmp_reqopts
-regenerate_ssl_link

ieee1905/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ieee1905
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a6a39128b1fe5132e51de4f580bf66f373515dcd
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ieee1905
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=IEEE1905 handler
-  DEPENDS:=+meshcomms +libubox +libubus +libblobmsg-json
-endef
-
-define Package/ieee1905/description
- Listens to ieee1905 messages, parse and expose them over ubus.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-#define Build/Prepare
-#        $(CP) -rf ./ieee1905/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/ieee1905/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905 $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,ieee1905))

ieee1905/files/etc/init.d/ieee1905

@@ -1,24 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/ieee1905
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_config_trigger "config.change" "ieee1905" /etc/init.d/ieee1905 restart
-}

ifbt/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ifbt
-PKG_VERSION:=0.2
+PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=6a279efa5046ace0681a1d0e79592a120f80e171
+PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -16,9 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=README
-
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)

ifsi/Makefile

@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2015 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ifsi
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+define Package/ifsi
+  CATEGORY:=Utilities
+  DEPENDS:=+ubus +libubox
+  TITLE:=Inteno Functional Script Interface
+endef
+
+define Package/ifsi/description
+	Inteno Functional Script Interface
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Package/ifsi/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifsi $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ifsi))

ifsi/src/Makefile

@@ -0,0 +1,17 @@
+CC		= gcc
+CFLAGS		= -g -Wall
+LOCLIBS		= 
+LIBS		= -lubus -lubox -lblobmsg_json
+OBJS		= ifsi.o
+SRCS		= ifsi.c
+LIBSRCS		= 
+ISRCS		= 
+
+all: ifsi
+
+ifsi: ${OBJS}
+	${CC} ${LDFLAGS} ${LIBSRCS} -o ifsi ${OBJS} ${LIBS}
+
+clean:
+	rm -f ifsi *.o
+

ifsi/src/ifsi.c

@@ -0,0 +1,74 @@
+/*
+ * ifsi -- Inteno functional script interface
+ *
+ * Copyright (C) 2012-2013 Inteno Broadband Technology AB. All rights reserved.
+ *
+ * Author: dev@inteno.se
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <unistd.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/uloop.h>
+
+#include <libubus.h>
+
+static struct ubus_context *ctx;
+static struct ubus_event_handler event_listener;
+static struct blob_buf b;
+
+
+static void receive_event(struct ubus_context *ctx, struct ubus_event_handler *ev,
+			  const char *type, struct blob_attr *msg)
+{
+	char *str;
+	uint32_t id;
+
+	str = blobmsg_format_json(msg, true);
+	fprintf(stdout, "I got %s event %s\n", type, str);
+	free(str);
+}
+
+int main(int argc, char **argv)
+{
+	const char *ubus_socket = NULL;
+	int ret;
+
+	uloop_init();
+
+	ctx = ubus_connect(ubus_socket);
+	if (!ctx) {
+		fprintf(stderr, "Failed to connect to ubus\n");
+		return 1;
+	}
+
+	ubus_add_uloop(ctx);
+
+	event_listener.cb = receive_event;
+	ret = ubus_register_event_handler(ctx, &event_listener, "*");
+	if (ret)
+		fprintf(stderr, "Couldn't register to router events\n");
+
+	uloop_run();
+
+	ubus_free(ctx);
+	uloop_done();
+
+	return 0;
+}
+

imonitor/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
+PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

inotify-tools/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inotify-tools
+PKG_VERSION:=3.14
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=1df9af4d6cd0f4af4b1b19254bcf056aed4ae395
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/rvoicilas/inotify-tools.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inotify-tools
+	CATEGORY:=Utilities
+	TITLE:=Tools to trace filesystem events.
+	URL:=
+endef
+
+define Package/inotify-tools/description
+	Tools to trace filesystem events.
+endef
+
+define Package/inotify-tools/install
+	$(INSTALL_DIR) $(1)/usr
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0.4.1 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so.0 $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libinotifytools.so $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywait $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inotifywatch $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,inotify-tools))

inotify-tools/files/usr/bin/iop_write_monitor

@@ -0,0 +1,13 @@
+#! /bin/sh
+
+# is the real root mounted ?
+if [ ! -f /tmp/inotify_real_root/etc/preinit ]
+then
+	ubivol=$( cat /proc/cmdline  | sed -e "s/.*root=\(ubi:rootfs_.\).*/\1/" )
+	mkdir /tmp/inotify_real_root
+	mount -t ubifs $ubivol /tmp/inotify_real_root
+fi
+
+inotifywait -r -m -e modify -e create -e attrib -e delete -e move /tmp/inotify_real_root
+
+

iop/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=iop
 PKG_VERSION:=1.0
 PKG_RELEASE:=0
-PKG_LICENSE:=GPLv2
 
 include $(INCLUDE_DIR)/package.mk
 

iop/config

@@ -14,7 +14,6 @@ CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_easy-qos=y
 CONFIG_PACKAGE_gdb=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
@@ -37,7 +36,6 @@ CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-easyqos=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
 CONFIG_PACKAGE_juci-icwmp=y
@@ -80,7 +78,6 @@ CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
 CONFIG_PACKAGE_openssl-util=y
@@ -117,7 +114,6 @@ CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
 CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_uspd=y
 CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
 CONFIG_PACKAGE_libwifi=y
@@ -183,10 +179,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
-CONFIG_BUSYBOX_CONFIG_MOUNTPOINT=y
-CONFIG_BUSYBOX_CONFIG_RUN_PARTS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_RUN_PARTS_FANCY=y
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y

iop/scripts/cve-check.sh

@@ -1,36 +0,0 @@
-#!/bin/sh
-function cvecheck {
-    CVEDIR="/tmp/cve-indicator/"
-    CVEBIN="${CVEDIR}/bin"
-    REPORTS="reports"
-    mkdir -p $REPORTS
-
-    dpkg -s python3 python3-requests python3-yaml python3-mako python3-six &> /dev/null
-    if [ $? -ne 0 ]
-        then
-            echo "Missing dependencies"
-            sudo apt-get update
-            sudo apt-get install python3 python3-requests python3-yaml python3-mako python3-six
-
-        else
-            echo    "Dependecy check passed"
-    fi
-
-
-if [ -d "$CVEDIR" ]; then
-  ### Take action if $DIR exists ###
-  echo "${CVEDIR} exists running cvecheck"
-else
-  ###  Control will jump here if $DIR does NOT exists ###
-  echo "Error: cvecheck not found. getting from iopsys repo"
-  git clone git@dev.iopsys.eu:iopsys/cve-indicator.git /tmp/cve-indicator
-fi
-  CVEGENLIST=`${CVEBIN}/cve-indicator gen-list openwrt bin`
-  CVEGETCVES=`${CVEBIN}/cve-indicator get-cves $CVEGENLIST --api_url http://cve.circl.lu/api/cvefor/`
-  CVEGETRPRT=`${CVEBIN}/cve-indicator gen-rprt $CVEGETCVES`
-exit 0
-
-}
-
-
-register_command "cvecheck" "Generate a CVE report on latest build"

iop/scripts/extract_core.sh

@@ -6,9 +6,13 @@ function extract_core {
 	topdir=$(pwd)
 
 	# Paths to packages that should be exported.
+	paths+='package/network/services/dnsmasq '
 	paths+='package/network/config/firewall '
 	paths+='package/network/config/netifd '
+	paths+='package/network/config/qos-scripts '
 	paths+='package/utils/busybox '
+	paths+='package/base-files '
+	paths+='package/system/procd '
 	paths+='package/system/rpcd '
 	paths+='package/network/services/openvpn '
 
@@ -20,13 +24,7 @@ function extract_core {
 		echo ""
 		echo "Example: $0 extract_core"
 		echo "  -p package/utils/busybox"
-		echo "  -r feeds/openwrt_core"
-		echo "  -b devel"
-		echo ""
-		echo "Extract all default packages:"
-		echo "$0 extract_core"
-		echo "  -p default"
-		echo "  -r feeds/openwrt_core"
+		echo "  -r feeds/lede_core"
 		echo "  -b devel"
 	}
 

iop/scripts/feeds_update.sh

@@ -28,7 +28,7 @@ function feeds_update {
 
     # replace core packages with iopsys versions
     if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a
+		./scripts/feeds install -f -p lede_core -a
     fi
 
     # targets need to be installed explicitly

iop/scripts/genconfig.sh

@@ -139,6 +139,7 @@ function genconfig {
 		DEVELOPER=1
 
 		bcmAllowed=0
+		iceAllowed=0
 		endptAllowed=0
 		natalieAllowed=0
 		mediatekAllowed=0
@@ -149,6 +150,7 @@ function genconfig {
 		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
 		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
 		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
+		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
 	}
 
 	v() {
@@ -354,6 +356,7 @@ function genconfig {
 			# rewrite url to clone with ssh instead of http
 			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
 			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
 			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
@@ -361,6 +364,7 @@ function genconfig {
 		else
 			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
+			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
 			echo "CONFIG_NATALIE_OPEN=y" >> .config
 			echo "CONFIG_MEDIATEK_OPEN=y" >> .config

iop/scripts/generate_tarballs.sh

@@ -59,6 +59,23 @@ build_endptmngr_consumer() {
 	cd "$curdir"
 }
 
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
+	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	cd "$curdir"
+}
+
 build_wifilife_consumer() {
 	local ver commit
 	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
@@ -112,8 +129,8 @@ function print_usage {
 
 function generate_tarballs {
 
-    SERVER="god@download.iopsys.eu"
-    FPATH="/var/www/html/iopsys/opensdk"
+    SERVER="god@software.inteno.se"
+    FPATH="/var/www/html/iopsys/consumer"
 
     set -e
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
@@ -152,9 +169,11 @@ function generate_tarballs {
 		build_bcmkernel_consumer
 		build_natalie_consumer
 		build_endptmngr_consumer
+		build_ice_consumer
 		build_wifilife_consumer
 	elif [ "$stk_target" == "mediatek" ]; then
 		build_mediatek_kernel
+		build_ice_consumer		
 		build_wifilife_consumer
 	else
 		echo "Invalid target: $stk_target"

iop/scripts/licenses_gen.sh

@@ -1,35 +0,0 @@
-#!/bin/sh
-function license_report {
-    LICDIR="/tmp/licenses-generator/"
-    LICBIN="${LICDIR}/bin"
-
-
-    dpkg -s python3 python3-requests python3-yaml python3-mako python3-six &> /dev/null
-    if [ $? -ne 0 ]
-        then
-            echo "Missing dependencies"
-            sudo apt-get update
-            sudo apt-get install python3 python3-requests python3-yaml python3-mako python3-six
-
-        else
-            echo    "Dependecy check passed"
-    fi
-
-
-if [ -d "$LICDIR" ]; then
-  ### Take action if $DIR exists ###
-  echo "Creating json licences file and html formated report"
-else
-  ###  Control will jump here if $DIR does NOT exists ###
-  echo "Error: licenses-generator not found. getting from iopsys repo"
-  git clone git@dev.iopsys.eu:iopsys/licenses-generator.git $LICDIR
-fi
-  LICGET=`${LICBIN}/licenses-generator  gen-License bin/`
-  echo $LICGET
-  ${LICBIN}/licenses-generator gen-licrprt $LICGET
-exit 0
-
-}
-
-
-register_command "license_report" "Generate a Licence report on latest build in json format and html under reports"

iopupgrade/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 

iopupgrade/files/sbin/iopu

@@ -25,7 +25,6 @@ log_stdout=1		# set to 0 to prevent the log to also print to stdout
 upd_noreboot=0		# set to 1 if we should not reboot after programming
 upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
 upd_forceboot=0		# set this to force upgrade of boot loader
-upd_keepconfig=0	# set this to keep the current configuration.
 ###############################################################################
 # import external functions
 source /lib/upgrade/iopsys.sh
@@ -52,41 +51,25 @@ function log {
 # anyhting it calls as stdout/stderr might no longer exist
 function finish {
 
-    if [ $run_cleanup -eq 1 ]
+    if [ "$run_cleanup" == "1" ]
     then
 
 	function_call upd_cleanup
-	run_cleanup=0
 	log ""
     fi
 
-    if [ $run_mount_cleanup -eq 1 ]
+    if [ "$run_mount_cleanup" == "1" ]
     then
 	log "Cleaning up after mount"
 	umount_newroot
     fi
     # always kill the timeout process, will leave the sleep but that is harmless
     # as long as the kill will nerver be run.
-    if [ -n "$TIMEOUT_PID" ]; then
-        kill $TIMEOUT_PID 2>/dev/null
-        TIMEOUT_PID=""
-    fi
+    kill $TIMEOUT_PID 2>/dev/null
 
     lock -u /tmp/iopu.lock
 }
 
-function ctrl_c {
-
-    # on ctrl-c we remove the exit handler as it is called directly.
-    trap - EXIT
-
-    # call cleanup function
-    finish
-
-    # do not continue program
-    exit 1
-}
-
 function sig_pipe {
     log_stdout=0  # stdin,stdout,stderr do not exist anymore
     log "Got sigpipe. Turning of log printing to stdout"
@@ -94,6 +77,7 @@ function sig_pipe {
 
 # if a timout happens terminate
 function timeout {
+    finish
     exit 1
 }
 
@@ -149,7 +133,6 @@ function umount_newroot {
     umount /tmp/newroot_overlay/rom
     umount /tmp/newroot_overlay
     umount /tmp/newroot
-    rmdir /tmp/newroot_overlay /tmp/newroot
     run_mount_cleanup=0
 }
 
@@ -158,23 +141,11 @@ function usage {
     echo ""
     echo "opts:"
     echo ""
-    echo "	-n		Do not do the final reboot of the target board"
-    echo "	-c		Keep configuration"
-    echo "	-x		Force install even if firmware is not for this board"
-    echo "	-b		Force install of bootloader regardless of version installed"
-    echo "	-r		Jump into chroot env of other system"
-    echo "	-C \"command\"	Execute command in chroot env of other system"
-}
-
-# Execute command in newroot(other system root)
-function newroot_exec {
-
-    upd_vol=$(get_flashbank_next)
-    mount_newroot
-    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay "$@")
-    echo ""
-    umount_newroot
-
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-r	Jump into chroot env of other system"
 }
 
 ###############################################################################
@@ -190,11 +161,10 @@ then
 fi
 
 trap finish EXIT
-trap ctrl_c INT
 trap timeout SIGALRM
 trap sig_pipe SIGPIPE
 
-while getopts "nrxbhcC:" opt; do
+while getopts "nrxb" opt; do
     case $opt in
 	n)
 	    upd_noreboot=1
@@ -205,19 +175,16 @@ while getopts "nrxbhcC:" opt; do
 	b)
 	    upd_forceboot=1
 	    ;;
-	c)
-	    upd_keepconfig=1
-	    ;;
 	r)
-	    newroot_exec /bin/sh
-	    exit
-	    ;;
-	C)
-	    newroot_exec "${OPTARG}"
-	    exit
+	    upd_vol=$(get_flashbank_next)
+	    mount_newroot
+	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
+	    echo ""
+	    umount_newroot
+	    exit 0
 	    ;;
 	h)
-	    usage
+	    upd_usage
 	    exit 1
 	    ;;
     esac
@@ -226,7 +193,8 @@ done
 # put a timeout on this if it takes longer than 120 seconds we should abort
 # and clean up
 (
-	sleep 120 && kill -ALRM $$ 2>/dev/null		# send it a SIGALRM signal
+sleep 120	# if 2 minutes pass
+kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
 )&
 TIMEOUT_PID=$!
 
@@ -243,7 +211,7 @@ fi
 cur_vol=$(get_flashbank_current)
 upd_vol=$(get_flashbank_next)
 
-# convert volume name "rootfs_$upd_vol" into ubi volume id
+# convert volume name "rootfs_$upd_vol" into ubifs volume id
 upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
 log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
 
@@ -259,32 +227,29 @@ function_call upd_conf_kernel
 log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
 run_cleanup=1	# When we start to actually write data there might be some
 		# things that need cleanup if we get an error/crash
-if ! iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id; then
-	log "iopupgrade program Failed"
-	exit 1
+iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
+
+# in case of any error we abort
+if [ $? -ne 0 ]; then
+    log "iopupgrade program Failed"
+    exit 1
 fi
 
 log "Firmware programmed to flash."
 
+
+log "Transfering configuration to new system."
+
 # Force upgrade of boot loader
 [ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
 
-if [ $upd_keepconfig -eq 1 ]; then
-	log "Transfering configuration to new system."
-	chroot_cmdline="$chroot_cmdline -c"
-fi
-
 mount_newroot
-if ! chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline; then
-	log "Configuration migration failed!"
-	exit 1
-fi
+chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
 umount_newroot
 
-log "New firmware fully installed."
+log "Update fully installed."
 run_cleanup=0
 
-
 # Now make sure that we actually boot the new system on the next reboot
 upd_finnish
 
@@ -306,3 +271,8 @@ else
 fi
 
 
+
+
+
+
+

iopupgrade/files/sbin/iopu_chroot

@@ -14,7 +14,6 @@
 # by functions declared in this script
 upd_forceboot=0
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_keepconfig=0	# set this to keep the current configuration.
 
 ###############################################################################
 # import external functions
@@ -25,36 +24,33 @@ source /lib/upgrade/iopsys.sh
 
 # only call function if it exists
 function_call() {
-	if [ -n "$1" ] && type "$1" 2>/dev/null >/dev/null
-	then
-		$1 "$@" || exit
-	fi
+    if type "$1" 2>/dev/null >/dev/null
+    then
+	$1 $@
+    fi
 }
 # Cleanup and error handling functions.
 function log {
-	TIME=$(date)
-	[ $log_stdout -eq 1 ] && echo "$@"
-	echo "[$TIME] $@" >>/root/upd_log
+    TIME=$(date)
+    [ $log_stdout -eq 1 ] && echo "$@"
+    echo "[$TIME] $@" >>/root/upd_log
 }
 
 
-while getopts "hbc" opt; do
-	case $opt in
-		h)
-			upd_usage
-			exit 1
-			;;
-		c)
-			upd_keepconfig=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-	esac
+while getopts "hb" opt; do
+    case $opt in
+	h)
+	    upd_usage
+	    exit 1
+	    ;;
+	b)
+	    upd_forceboot=1
+	    ;;
+	\?)
+	    echo "Invalid option: -$OPTARG" >&2
+	    exit 1
+	    ;;
+    esac
 done
 
 # copy old install log over
@@ -63,9 +59,3 @@ cp /tmp/oldroot/tmp/upd_log /root/upd_log
 # Upgrade boot loader if needed.
 function_call upd_program_boot
 
-# Let the new upgrade do whatever it needs,
-# such as configuration migration etc.
-if [ $upd_keepconfig -eq 1 -a -x /lib/upgrade/post-rootfs-fixup ]; then
-	(/lib/upgrade/post-rootfs-fixup /dev/null /tmp/oldroot) || exit
-fi
-

iwatchdog/Makefile

@@ -1,9 +1,6 @@
-# Copyright (C) 2019 iopsys
 #
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
+# Copyright (C) 2013 Inteno
 #
-
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
@@ -11,9 +8,6 @@ PKG_NAME:=iwatchdog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 
@@ -28,7 +22,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/iwatchdog
   CATEGORY:=Utilities
-  TITLE:=IOPSYS watchdog
+  TITLE:=Inteno watchdog
 endef
 
 define Package/iwatchdog/description

json-editor/Makefile

@@ -1,32 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=json-editor
-PKG_RELEASE:=1.0.0
-
-PKG_SOURCE_VERSION:=44b32937a062ec4ffc9f7355841dc94ab6efa50f
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/json-editor.git
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/json-editor
-  SECTION:=base
-  CATEGORY:=Libraries
-  DEPENDS:=+libjson-c +libblobmsg-json
-  TITLE:=JSON-editor
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_BUILD_DIR)/src/json-editor.h $(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjson-editor.so $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,json-editor))

libjwt/Makefile

@@ -17,8 +17,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_FIXUP:=autoreconf
 
-PKG_LICENSE:=LGPLv3
-PKG_LICENSE_FILES:=COPYING
 include $(INCLUDE_DIR)/package.mk
 
 define Package/libjwt

libmicroxml/Makefile

@@ -1,56 +0,0 @@
-#
-# Copyright (C) 2012-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libmicroxml
-PKG_VERSION:=2012-06-11
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git://dev.freecwmp.org/microxml
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_LICENSE:=LGPL-2.0
-PKG_LICENSE_FILES:=COPYING
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libmicroxml
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=XML library
-  MAINTAINER:=Luka Perkov <luka@openwrt.org>
-endef
-
-define Package/libmicroxml/description
- A micro sized XML library
-endef
-
-CONFIGURE_ARGS += \
-	--disable-threads \
-	--enable-static \
-	--enable-shared
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
-endef
-
-define Package/libmicroxml/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -1,130 +0,0 @@
-diff --git a/mxml-file.c b/mxml-file.c
-index 02eca9d..f10d202 100644
---- a/mxml-file.c
-+++ b/mxml-file.c
-@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
-   * Write the node...
-   */
- 
--  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
-+  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
-+    global_free(global);
-     return (-1);
--
-+  }
-+  
-+  global_free(global);
-   if (col > 0)
-     if (putc('\n', fp) < 0)
-       return (-1);
-@@ -1448,6 +1451,7 @@ mxml_load_data(
-   if ((buffer = malloc(64)) == NULL)
-   {
-     mxml_error("Unable to allocate string buffer!");
-+    global_free(global);
-     return (NULL);
-   }
- 
-@@ -2083,11 +2087,12 @@ mxml_load_data(
- 		 node->parent ? node->parent->value.element.name : "(null)");
- 
-       mxmlDelete(first);
--
-+      global_free(global);
-       return (NULL);
-     }
-   }
- 
-+  global_free(global);
-   if (parent)
-     return (parent);
-   else
-@@ -2102,7 +2107,7 @@ error:
-   mxmlDelete(first);
- 
-   free(buffer);
--
-+  global_free(global);
-   return (NULL);
- }
- 
-diff --git a/mxml-private.c b/mxml-private.c
-index 4378ca3..ea6e452 100644
---- a/mxml-private.c
-+++ b/mxml-private.c
-@@ -41,6 +41,32 @@
-  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
-  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
-  */
-+void *global_mem[16] = {0};
-+
-+static void *global_calloc(int x, int size)
-+{
-+  int i;
-+  void *m = calloc(x, size);
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
-+    global_mem[i] = global_mem[i-1];
-+  }
-+  global_mem[0] = m;
-+  return m;
-+}
-+
-+void global_free(void *m)
-+{
-+  int i;
-+  if (m == NULL)
-+    return;
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
-+    if (global_mem[i] == m) {
-+      global_mem[i] = NULL;
-+      free(m);
-+      break;
-+    }
-+  }
-+}
- 
- #if defined(__sun) || defined(_AIX)
- #  pragma fini(_mxml_fini)
-@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
-   return (MXML_REAL);
- }
- 
--
- #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
- #  include <pthread.h>
- 
-@@ -190,7 +215,6 @@ _MXML_FINI(void)
-   }
- }
- 
--
- /*
-  * '_mxml_global()' - Get global data.
-  */
-@@ -205,7 +229,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
-     pthread_setspecific(_mxml_key, global);
- 
-     global->num_entity_cbs = 1;
-@@ -288,7 +312,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
- 
-     global->num_entity_cbs = 1;
-     global->entity_cbs[0]  = _mxml_entity_cb;
-diff --git a/mxml-private.h b/mxml-private.h
-index c591208..72ed338 100644
---- a/mxml-private.h
-+++ b/mxml-private.h
-@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
- extern _mxml_global_t	*_mxml_global(void);
- extern int		_mxml_entity_cb(const char *name);
- 
-+extern void global_free(void *m);

libpicoevent/Makefile

@@ -14,8 +14,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=7875222706cb6999af0361ef0aebdc85cd75c127
 PKG_NAME:=libpicoevent
 
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 

librpc/Makefile

@@ -1,33 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=librpc
-PKG_RELEASE=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL=$(LEDE_GIT)/project/librpc-uclibc.git
-PKG_SOURCE_DATE:=2015-11-04
-PKG_SOURCE_VERSION:=a921e3ded051746f9f7cd5e5a312fb6771716aac
-PKG_MIRROR_HASH:=22c8dc55e1c4e8e31635a37708a3ce622a6ca33ebd918a4321b0be6ffce89b21
-CMAKE_INSTALL:=1
-PKG_USE_MIPS16:=0
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/librpc
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=uClibc RPC library
-endef
-
-define Package/librpc/install
-	$(INSTALL_DIR) $(1)/lib/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/librpc.so $(1)/lib/
-endef
-
-$(eval $(call BuildPackage,librpc))

libtrace/Makefile

@@ -12,9 +12,6 @@ PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_INSTALL:=1
 PKG_FIXUP:=autoreconf
 

lmbench/Makefile

@@ -15,9 +15,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tgz
 PKG_SOURCE_URL:=@SF/lmbench/
 PKG_MD5SUM:=b3351a3294db66a72e2864a199d37cbf
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_BUILD_DEPENDS:=librpc
 
 include $(INCLUDE_DIR)/package.mk

logrotate/Makefile

@@ -19,9 +19,6 @@ PKG_CAT:=zcat
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/logrotate

loop-detector/Makefile

@@ -1,9 +1,3 @@
-# Copyright (C) 2019 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=loop-detector
@@ -17,9 +11,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 include $(INCLUDE_DIR)/package.mk
 
 

ltq-nand/Makefile

@@ -16,9 +16,6 @@ PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
 #PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
 #PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/host-build.mk
 
 

meshcomms/Makefile

@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=meshcomms
-PKG_VERSION:=1.0.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=8d5808d81d1fc96e4ce4ee682847b4de15b46224
-PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/meshcomms.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=BSD2+Patent
-PKG_LICENSE_FILES:=LICENSE
-
-PLATFORM := linux
-FLAVOUR  := iopsys
-
-export PLATFORM
-export FLAVOUR
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/meshcomms
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Mesh agent
-  DEPENDS:=+libpcap +libopenssl +libubox +libubus +libblobmsg-json
-endef
-
-define Package/meshcomms/description
- meshComms is an open source implementation of IEEE 1905.1a that is an output
- of the Broadband Forum Open Broadband - Multi Access Point (OB-MAP) project.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-        -DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
-
-ifneq ($(CONFIG_BIG_ENDIAN),)
-TARGET_CFLAGS += -D_HOST_IS_BIG_ENDIAN_=1
-else
-TARGET_CFLAGS += -D_HOST_IS_LITTLE_ENDIAN_=1
-endif
-
-#define Build/Prepare
-#        $(CP) -rf ./meshcomms/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/meshcomms/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) ./files/meshcomms.conf $(1)/etc/config/meshcomms
-	$(INSTALL_BIN) ./files/meshcomms.init $(1)/etc/init.d/meshcomms
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/output/al_entity $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,meshcomms))

meshcomms/files/meshcomms.conf

@@ -1,8 +0,0 @@
-config meshcomms 'global'
-    option basemacint 'wan'
-    list interfaces 'lan'
-    list interfaces 'wan'
-    option mapall true
-    option debug  false
-    option port  8888
-

meshcomms/files/meshcomms.init

@@ -1,105 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/al_entity
-
-validate_global_section()
-{
-	uci_validate_section meshcomms meshcomms "${1}" \
-		'basemacint:string:wan' \
-		'interfaces:string:lan' \
-		'mapall:bool:true' \
-		'debug:bool:true' \
-		'port:port:8888'
-}
-
-get_device_name() {
-	local device
-	# Get wan L3 interface
-	ubus list |grep -iq network.interface.${1}
-	if [ "$?" -eq 0 ]; then
-		json_load "$(ubus -t 2 call network.interface.${1} status)"
-		json_get_var device device
-		echo ${device}
-	fi
-}
-
-get_interface_mac() {
-	local l3 basemac
-	l3=$(get_device_name ${1})
-	if [ -n ${l3} ]; then
-		json_load "$(ubus -t 2 call network.device status "{\"name\":\"${l3}\"}")"
-		json_get_var basemac macaddr
-	fi
-	echo ${basemac}
-}
-
-configure_meshcomms()
-{
-	local basemacint interfaces mapall debug port l3device basemac intf
-
-	validate_global_section global || {
-		echo "Validation of global section failed"
-		return 1;
-	}
-	if [ ${debug} -eq 1 ]; then
-		# Forward stdout of the command to logd
-		procd_set_param stdout 1
-		# Same for stderr
-		procd_set_param stderr 1
-	fi
-	
-	basemac=$(get_interface_mac ${basemacint})
-
-
-	for f in ${interfaces}
-	do
-		local l3=$(get_device_name $f)
-		intf="${intf} ${l3}"
-	done
-	intf=$(echo $intf|sed 's/ /,/g')
-	[ -z "${intf}" ] && \
-		echo "interface list is empty/invalid">/dev/console \
-		return 1
-
-	procd_append_param command -m ${basemac} -i ${intf}
-
-	[ "${debug}" -eq 1 ] && \
-		procd_append_param command -vv
-
-	[ "${mapall}" -eq 1 ] && \
-		procd_append_param command -w
-
-	[ ${port} -ne 8888 ] && \
-		procd_append_param command -p ${port}
-}
-
-configure_network() {
-	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
-	if [ "$?" -ne 0 ]; then
-		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
-		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
-	fi
-	config_load meshcomms
-	config_foreach configure_meshcomms meshcomms
-}
-
-start_service() {
-	procd_open_instance meshcomms
-	procd_set_param command ${PROG}
-	configure_network
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger "network"
-}

mqtt-ciotc/Makefile

@@ -16,8 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=Apache-2.0
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/mqtt-ciotc

mt7603/Makefile

@@ -1,291 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mt7603e
-PKG_VERSION:=4.1.2.0_20190222
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:mediatek/mt7603.git
-PKG_SOURCE_VERSION:=4e94b2c3f45b7d5374ed988cdad925d5ca30b838
-#PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-#PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_KCONFIG:= \
-	AP_SUPPORT \
-	RT_FIRST_CARD \
-	RT_SECOND_CARD \
-	RT_FIRST_IF_RF_OFFSET \
-	RT_SECOND_IF_RF_OFFSET \
-	MT_WIFI \
-	WIFI_BASIC_FUNC \
-	MT_WIFI_PATH \
-	FIRST_IF_NONE \
-	FIRST_IF_EEPROM_FLASH \
-	FIRST_IF_EEPROM_EFUSE \
-	RT_FIRST_CARD_EEPROM \
-	SECOND_IF_NONE \
-	SECOND_IF_EEPROM_FLASH \
-	SECOND_IF_EEPROM_PROM \
-	SECOND_IF_EEPROM_EFUSE \
-	RT_SECOND_CARD_EEPROM \
-	MULTI_INF_SUPPORT \
-	WIFI_BASIC_FUNC \
-	WIRELESS_EXT \
-	WEXT_SPY \
-	WEXT_PRIV \
-	DOT11_N_SUPPORT \
-	DOT11_VHT_AC \
-	DOT11_HE_AX \
-	CFG_SUPPORT_FALCON_MURU \
-	CFG_SUPPORT_FALCON_TXCMD_DBG \
-	CFG_SUPPORT_FALCON_SR \
-	WIFI_DRIVER \
-	G_BAND_256QAM_SUPPORT \
-	BRCM_256QAM_SUPPORT \
-	ICAP_SUPPORT \
-	MT_AP_SUPPORT \
-	BACKGROUND_SCAN_SUPPORT \
-	SMART_CARRIER_SENSE_SUPPORT \
-	SCS_FW_OFFLOAD \
-	THERMAL_PROTECT_SUPPORT \
-	MT_DFS_SUPPORT \
-	HDR_TRANS_TX_SUPPORT \
-	CHIP_MT7615E \
-	HDR_TRANS_RX_SUPPORT \
-	SUPPORT_DYNAMIC_TXOP \
-	WSC_INCLUDED \
-	MT_STA_SUPPORT \
-	WSC_V2_SUPPORT \
-	DOT11W_PMF_SUPPORT \
-	PASSPOINT_R2 \
-	TXBF_SUPPORT \
-	IGMP_SNOOP_SUPPORT \
-	RATE_ADAPTION \
-	RATE_ADAPT_AGBS_SUPPORT \
-	RTMP_FLASH_SUPPORT \
-	ATE_SUPPORT \
-	WLAN_SERVICE \
-	UAPSD \
-	RLT_MAC \
-	RLT_BBP \
-	RLT_RF \
-	RTMP_MAC \
-	RTMP_BBP \
-	RTMP_RF \
-	RTMP_PCI_SUPPORT \
-	RTMP_USB_SUPPORT \
-	RTMP_RBUS_SUPPORT \
-	WIFI_MODE_AP \
-	WIFI_MODE_STA \
-	WIRELESS_EXT \
-	WEXT_SPY \
-	WEXT_PRIV \
-	WDS_SUPPORT \
-	MBSS_SUPPORT \
-	APCLI_SUPPORT \
-	APCLI_CERT_SUPPORT \
-	APCLI_CONNECTION_TRIAL \
-	MAC_REPEATER_SUPPORT \
-	RALINK_RT6352 \
-	RALINK_MT7620 \
-	RALINK_MT7603E \
-	CON_WPS_SUPPORT \
-	VOW_SUPPORT \
-	BAND_STEERING \
-	TXOP_ARBITER \
-	CFG_SUPPORT_DYNAMIC_TXOP \
-	WIFI_MODE_BOTH \
-	WIFI_RLT_MAC \
-	RLT_MAC \
-	WIFI_RTMP_MAC \
-	RTMP_MAC \
-	WIFI_MT_MAC \
-	CHIP_MT7603E \
-	CHIP_MT7615E \
-	MT_MAC \
-	RATE_ADAPTION \
-	SUPPORT_OPENWRT \
-	SDK_USER_LIGHTY \
-	MUMIMO_SUPPORT \
-	MU_RA_SUPPORT \
-	LED_CONTROL_SUPPORT \
-	RA_HW_NAT \
-	RA_HW_NAT_WIFI_NEW_ARCH \
-	CFG80211_SUPPORT \
-	SER_SUPPORT \
-	GREENAP_SUPPORT \
-	RADIUS_ACCOUNTING_SUPPORT \
-	TPC_SUPPORT \
-	RLM_CAL_CACHE_SUPPORT \
-	CAL_BIN_FILE_SUPPORT \
-	RF_LOCKDOWN_SUPPORT \
-	PASSPOINT_R2 \
-	RED_SUPPORT \
-	FIRST_IF_EPAELNA \
-	FIRST_IF_IPAILNA \
-	FIRST_IF_IPAELNA \
-	FIRST_IF_EPAILNA \
-	SECOND_IF_EPAELNA \
-	SECOND_IF_IPAILNA \
-	SECOND_IF_IPAELNA \
-	SECOND_IF_EPAILNA \
-	THIRD_IF_EPAELNA \
-	THIRD_IF_IPAILNA \
-	THIRD_IF_IPAELNA \
-	THIRD_IF_EPAILNA \
-	WIFI_PKT_FWD \
-	DOT11K_RRM_SUPPORT \
-	DOT11R_FT_SUPPORT \
-	ENTERPRISE_AP_SUPPORT \
-	WIFI_EAP_FEATURE \
-	RADIUS_MAC_AUTH_SUPPORT \
-	VLAN_SUPPORT \
-	DYNAMIC_VLAN_SUPPORT \
-	CUSTOMISED_HOSTAPD_SUPPORT \
-	APCLI_STA_SUPPORT \
-	WDS_STA_SUPPORT \
-	MBSS_AS_WDS_AP_SUPPORT \
-	MBO_SUPPORT \
-	MAP_SUPPORT \
-	WPA3_SUPPORT \
-	OWE_SUPPORT \
-	WIFI_PKT_FWD_V1 \
-	FIRST_IF_MT7615E \
-	FIRST_IF_MT7622 \
-	FIRST_IF_MT7626 \
-	FIRST_IF_AXE \
-	FIRST_IF_MT7915 \
-	SECOND_IF_MT7615E \
-	SECOND_IF_AXE \
-	THIRD_IF_NONE \
-	THIRD_IF_MT7615E \
-	CHIP_AXE \
-	CHIP_MT7915 \
-	RT_THIRD_CARD \
-	RT_THIRD_IF_RF_OFFSET \
-	THIRD_IF_EEPROM_FLASH \
-	THIRD_IF_EEPROM_PROM \
-	THIRD_IF_EEPROM_EFUSE \
-	RT_THIRD_CARD_EEPROM \
-	SPECTRUM_SUPPORT \
-	PRE_CAL_TRX_SET1_SUPPORT \
-	MWDS \
-	MCAST_RATE_SPECIFIC \
-	WLAN_HOOK \
-	COEX_SUPPORT \
-	EASY_SETUP_SUPPORT \
-	EVENT_NOTIFIER_SUPPORT \
-	AIR_MONITOR \
-	OFFCHANNEL_SCAN_FEATURE \
-	WNM_SUPPORT \
-	INTERWORKING \
-	LINUX_NET_TXQ_SUPPORT \
-	CHIP_MT7622 \
-	CHIP_MT7626 \
-	MEMORY_SHRINK \
-	RPS_EFFICIENCY \
-	WHNAT_SUPPORT \
-	FAST_NAT_SUPPORT \
-	PRE_CAL_TRX_SET2_SUPPORT \
-	LINK_TEST_SUPPORT \
-	TCP_RACK_SUPPORT \
-	FQ_SCH_SUPPORT \
-	BRCM_256QAM_SUPPORT \
-	VHT_TXBF_2G_EPIGRAM_IE_SUPPORT \
-	DSCP_QOS_MAP_SUPPORT \
-	DSCP_PRI_SUPPORT \
-	PCIE_ASPM_DYM_CTRL_SUPPORT \
-	MIN_PHY_RATE_SUPPORT \
-	FAST_UP_RATE_SUPPORT \
-	TXRX_STAT_SUPPORT \
-	VENDOR_FEATURE11_SUPPORT \
-	WIFI_TWT_SUPPORT \
-	SINGLE_SKU \
-	SNIFFER_SUPPORT \
-
-PKG_CONFIG_DEPENDS:=$(foreach c, $(PKG_KCONFIG),$(if $(CONFIG_MTK_$c),CONFIG_$(c)))
-
-include $(INCLUDE_DIR)/package.mk
-
-#TAR_CMD=$(HOST_TAR) -C $(1)/ $(TAR_OPTIONS)
-
-define KernelPackage/mt7603e
-  CATEGORY:=Mediatek drivers
-  TITLE:=WiFi drivers
-  DEPENDS:= +wifi-profile
-ifneq ($(CONFIG_MTK_FAST_NAT_SUPPORT), )
-ifneq ($(CONFIG_NET_MEDIATEK_HNAT), )
-  DEPENDS+=+kmod-mediatek_hnat
-endif
-endif
-  FILES:=$(PKG_BUILD_DIR)/mt7603_wifi_ap/mt7603e.ko
-  AUTOLOAD:=$(call AutoProbe, mt7603e)
-  MENU:=1
-endef
-
-define KernelPackage/mt7603e/config
-	source "$(SOURCE)/globalconfig.in"
-endef
-
-## check following
-#CONFIG_MT7603E_HOTSPOT=y (depends on missing WAPP_SUPPORT)
-#CONFIG_MT7603E_MBO_SUPPORT=y
-#CONFIG_MT7603E_MAP_SUPPORT=y
-#CONFIG_MT7603E_TXBF_SUPPORT=y (undef -DVHT_TXBF_SUPPORT)
-#CONFIG_MT7603E_ACL_V2_SUPPORT=y (build error)
-#CONFIG_MT7603E_DFS_SUPPORT=y (unnecessary)
-#CONFIG_MT7603E_SINGLE_SKU_V2=y  (fix: get_single_sku_path())
-#CONFIG_MT7603E_WDS_SUPPORT=y ( incomplete? )
-#CONFIG_MT7603E_BTCOEX_CONCURRENT=y (undefined)
-
-NOSTDINC_FLAGS := -DCONFIG_SECOND_IF_MT7615E -DCONFIG_FIRST_IF_MT7603E
-
-
-define Build/Compile
-	+$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		SUBDIRS="$(PKG_BUILD_DIR)/mt7603_wifi_ap" \
-		$(foreach c, $(PKG_KCONFIG),$(if $(CONFIG_MTK_$c),CONFIG_$(c)=$(CONFIG_MTK_$(c)))) \
-		CONFIG_SUPPORT_OPENWRT=y CONFIG_MT_AP_SUPPORT=m CONFIG_CHIP_MT7603E=y CONFIG_MT_MAC=y \
-		CONFIG_FIRST_IF_MT7603E=y CONFIG_SECOND_IF_MT7615E=y \
-		CONFIG_RT_FIRST_IF_RF_OFFSET=0x0 CONFIG_RT_SECOND_IF_RF_OFFSET=0x8000 \
-		CONFIG_MT7603E_RALINK_MT7603E=y \
-		CONFIG_MT_MAC=y \
-		CONFIG_MT7603E_RTMP_PCI_SUPPORT=y \
-		CONFIG_MT7603E_NEW_RATE_ADAPT_SUPPORT=y CONFIG_MT7603E_AGS_SUPPORT=y \
-		CONFIG_MT7603E_UAPSD=y CONFIG_MT7603E_MT_MAC=y \
-		CONFIG_MT7603E_WSC_INCLUDED=y CONFIG_MT7603E_WSC_V2_SUPPORT=y \
-		CONFIG_MT7603E_DOT11W_PMF_SUPPORT=y \
-		CONFIG_MT7603E_DOT11N_DRAFT3=y \
-		CONFIG_MT7603E_DOT11R_FT_SUPPORT=y \
-		CONFIG_MT7603E_DOT11K_RRM_SUPPORT=y \
-		CONFIG_MT7603E_WNM_SUPPORT=y \
-		CONFIG_MT7603E_INTERWORKING=y \
-		CONFIG_MT7603E_IGMP_SNOOP_SUPPORT=y \
-		CONFIG_MT7603E_LED_CONTROL_SUPPORT=y \
-		CONFIG_MT7603E_MBSS_SUPPORT=y \
-		CONFIG_MT7603E_APCLI_SUPPORT=y \
-		CONFIG_MT7603E_MULTI_APCLI_SUPPORT=y \
-		CONFIG_MT7603E_MAC_REPEATER_SUPPORT=y \
-		CONFIG_MT7603E_ATE_SUPPORT=y \
-		CONFIG_MT7603E_BAND_STEERING_7603=y \
-		CONFIG_MT7603E_MULTI_INF_SUPPORT=y \
-		CONFIG_MT7603E_WPA3_SUPPORT=y \
-		CONFIG_MT7603E_OWE_SUPPORT=y \
-		CONFIG_MT7603E_SECURITY_IMPROVEMENT_SUPPORT=y \
-		CONFIG_MT7603E_NEW_BW2040_COEXIST_SUPPORT=y \
-		CONFIG_MT7603E_RLT_AP_SUPPORT=m \
-		modules
-endef
-
-define KernelPackage/mt7603e/install
-	true
-endef
-
-$(eval $(call KernelPackage,mt7603e))

mt7603/ap.config.in

@@ -1,317 +0,0 @@
-config MTK_MT_AP_SUPPORT
-	bool
-	default y
-	depends on MTK_WIFI_MODE_AP
-
-if MTK_MT_AP_SUPPORT
-
-config MTK_WDS_SUPPORT
-	bool "WDS"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_MBSS_SUPPORT
-	bool "Multi-BSS (MBSSID)"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_APCLI_SUPPORT
-	bool "AP-Client Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_APCLI_CERT_SUPPORT
-	bool "AP-Client TGn Cert Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-        default n
-
-config MTK_MAC_REPEATER_SUPPORT
-	bool "MAC Repeater Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-	default y
-
-config MTK_APCLI_CONNECTION_TRIAL
-        bool "AP-Client Trial Connection"
-        depends on MTK_MT_AP_SUPPORT
-        depends on MTK_APCLI_SUPPORT
-        default n
-
-config MTK_MWDS
-	bool "Mixed WDS (MWDS)"
-	depends on MTK_MT_AP_SUPPORT
-	select MTK_APCLI_SUPPORT
-	default n
-
-config MTK_MUMIMO_SUPPORT
-        bool "MU-MIMO Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_MU_RA_SUPPORT
-        default y
-
-config MTK_MU_RA_SUPPORT
-  	bool "MU-RGA Support"
-  	depends on MTK_MUMIMO_SUPPORT
-
-config MTK_DOT11R_FT_SUPPORT
-	bool "IEEE 802.11r Fast BSS Transition"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_DOT11K_RRM_SUPPORT
-	bool "IEEE 802.11k Radio Resource Management"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_IGMP_SNOOP_SUPPORT
-	bool "IGMP snooping (for multicast --> unicast)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_OFFCHANNEL_SCAN_FEATURE
-	bool "Off-Channel scan support (Channel Quality Monitor)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_SNIFFER_SUPPORT
-	bool "Sniffer support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_ENTERPRISE_AP_SUPPORT
-	bool "Enterprise AP Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_WIFI_EAP_FEATURE
-	bool "EAP Feature"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RADIUS_MAC_AUTH_SUPPORT
-        bool "RADIUS MAC Auth Support"
-        depends on MTK_ENTERPRISE_AP_SUPPORT
-        depends on MTK_CFG80211_SUPPORT
-        default n
-
-config MTK_VLAN_SUPPORT
-	bool "VLAN Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_ENTERPRISE_AP_SUPPORT
-	default n
-
-config MTK_DYNAMIC_VLAN_SUPPORT
-	bool "Dynamic VLAN Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_ENTERPRISE_AP_SUPPORT
-	default n
-
-config MTK_CFG80211_SUPPORT
-	bool "Linux CFG80211 support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-#CUSTOMISED HOSTAPD
-config MTK_CUSTOMISED_HOSTAPD_SUPPORT
-	bool "Customised Hostapd Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#APCLI STA
-config MTK_APCLI_STA_SUPPORT
-	bool "APCLI STA Support"
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#WDS STA
-config MTK_WDS_STA_SUPPORT
-	bool "WDS STA Support"
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#WDS AP
-config MTK_MBSS_AS_WDS_AP_SUPPORT
-	bool "MBSS as WDS AP Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_MBSS_SUPPORT
-	default n
-
-config MTK_DSCP_QOS_MAP_SUPPORT
-	bool "Dscp Qos Mapping Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_DSCP_PRI_SUPPORT
-	bool "Dscp Priority Mapping Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_MIN_PHY_RATE_SUPPORT
-        bool "Minimum PHY rate support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_FAST_UP_RATE_SUPPORT
-        bool "Fast UP rate support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_CON_WPS_SUPPORT
-	bool "Concurrent WPS Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_WSC_INCLUDED
-	depends on MTK_WSC_V2_SUPPORT
-	default n
-
-config MTK_MCAST_RATE_SPECIFIC
-	bool "User specific tx rate of mcast pkt"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_VOW_SUPPORT
-	bool "MediaAir (VOW) support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_BAND_STEERING
-	bool "Band Steering"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_LED_CONTROL_SUPPORT
-	bool "LED Control Support"
-	default n
-
-config MTK_WLAN_HOOK
-       bool "WLAN hook Support"
-       depends on MTK_WIFI_DRIVER
-       default n
-
-config MTK_RADIUS_ACCOUNTING_SUPPORT
-	bool "Radius Accounting Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_GREENAP_SUPPORT
-	bool "GreenAP Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_TXRX_STAT_SUPPORT
-	bool "Tx/Rx Stats Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_VENDOR_FEATURE11_SUPPORT
-        bool "Enable Vendor-11 Features"
-        depends on MTK_WIFI_DRIVER
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_PCIE_ASPM_DYM_CTRL_SUPPORT
-	bool "Pcie Aspm Dynamic Control Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_COEX_SUPPORT
-	bool "Coex Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_EASY_SETUP_SUPPORT
-	bool "Whole Home Coverage - Easy Setup"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_EVENT_NOTIFIER_SUPPORT
-	bool "Whole Home Coverage - Event Notifier"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_AIR_MONITOR
-        bool "Air Monitor"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_WNM_SUPPORT
-        bool "IEEE 802.11v WNM Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_INTERWORKING
-        bool "IEEE 802.11u Interworking"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_LINUX_NET_TXQ_SUPPORT
-	bool "NET TX Queue Support"
-	default n
-
-config  MTK_WPA3_SUPPORT
-        bool "WPA3 Support"
-        depends on MTK_MT_AP_SUPPORT
-        default y
-
-config  MTK_OWE_SUPPORT
-        bool "Enhanced Open Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config  MTK_SINGLE_SKU
-        bool "Single SKU Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_ICAP_SUPPORT
-	bool "ICAP Support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_SPECTRUM_SUPPORT
-	bool "Wifi Spectrum Mgmt Support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_FTM_SUPPORT
-	bool "FTM Support"
-	depends on MTK_WIFI_DRIVER
-	select MTK_PASSPOINT_R2
-	default n
-
-config MTK_PASSPOINT_R2
-	bool "Passpoint Release-2 Support"
-	depends on MTK_WIFI_DRIVER
-	select MTK_DOT11W_PMF_SUPPORT
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_MBO_SUPPORT
-        bool "MBO Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_INTERWORKING
-        select MTK_WNM_SUPPORT
-        select MTK_DOT11K_RRM_SUPPORT
-        select MTK_DOT11R_FT_SUPPORT
-        select MTK_DOT11W_PMF_SUPPORT
-        default n
-
-config MTK_MAP_SUPPORT
-        bool "Multi-AP (MAP) Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_INTERWORKING
-        select MTK_WNM_SUPPORT
-        select MTK_DOT11K_RRM_SUPPORT
-        select MTK_DOT11R_FT_SUPPORT
-        select MTK_DOT11W_PMF_SUPPORT
-        default n
-
-endif  #MTK_MT_AP_SUPPORT

mt7603/common.config.in

@@ -1,250 +0,0 @@
-#mtk wifi common optiions
-
-menu "Common WiFi options"
-
-config MTK_WIFI_BASIC_FUNC
-	bool "Linux Wireless Extension support (for iwconfig, iwpriv etc.)"
-	select MTK_WIRELESS_EXT
-	select MTK_WEXT_SPY
-	select MTK_WEXT_PRIV
-
-config MTK_DOT11_N_SUPPORT
-	bool "IEEE 802.11n support"
-	default y
-
-config MTK_DOT11_VHT_AC
-	bool "IEEE 802.11ac support"
-	depends on MTK_DOT11_N_SUPPORT
-	default y
-
-config MTK_DOT11_HE_AX
-	bool "IEEE 802.11ax support"
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_MURU
-	bool "MURU support"
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_TXCMD_DBG
-	bool "TXCMD DBG support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_SR
-	bool "Spatial Reuse (SR) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_CHIP_MT7915
-	default y
-
-config MTK_WIFI_TWT_SUPPORT
-	bool "Target Wake Time (TWT) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_HE_AX
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_G_BAND_256QAM_SUPPORT
-	bool "2.4G 256-QAM support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_VHT_AC
-        default y
-
-config MTK_BRCM_256QAM_SUPPORT
-	bool "BRCM 2.4G 256-QAM support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_G_BAND_256QAM_SUPPORT
-	default n
-
-config MTK_VHT_TXBF_2G_EPIGRAM_IE_SUPPORT
-	bool "BRCM 2.4G VHT Sounding support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_MT_DFS_SUPPORT
-	bool "IEEE 802.11h DFS Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_TPC_SUPPORT
-	bool "IEEE 802.11h TPC Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_BACKGROUND_SCAN_SUPPORT
-	bool "Background Scan Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_SMART_CARRIER_SENSE_SUPPORT
-	bool "Smart Carrier Sense Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_THERMAL_PROTECT_SUPPORT
-        bool "Thermal Protection"
-        depends on MTK_WIFI_DRIVER && MTK_SMART_CARRIER_SENSE_SUPPORT
-        default n
-
-config MTK_SCS_FW_OFFLOAD
-        bool "SCS Fw Offload Support"
-        depends on MTK_WIFI_DRIVER && MTK_SMART_CARRIER_SENSE_SUPPORT
-        default n
-
-config MTK_HDR_TRANS_TX_SUPPORT
-	bool "Tx Header Translation"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_HDR_TRANS_RX_SUPPORT
-	bool "Rx Header Translation"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_DBDC_MODE
-	bool "Dual-Band Dual-Concurrent (DBDC) mode support"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7626 || MTK_CHIP_MT7915
-	select MULTI_PROFILE_SUPPORT
-	select DEFAULT_5G_PROFILE
-	default y
-
-config MTK_MULTI_PROFILE_SUPPORT
-        bool "Multi Profile Support"
-        depends on MTK_DBDC_MODE
-        default n
-
-config MTK_DEFAULT_5G_PROFILE
-	bool "5G default profile for DBDC"
-	depends on MTK_DBDC_MODE
-	default y
-
-config MTK_WSC_INCLUDED
-	bool "WiFi Simple Config (WSC) or WPS"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_WSC_V2_SUPPORT
-	bool "WiFi Simple Config ver.2 (WPS 2.0)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_DOT11W_PMF_SUPPORT
-	bool "IEEE 802.11w PMF support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_TXBF_SUPPORT
-	bool "Tx Beam Forming Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_FAST_NAT_SUPPORT
-       bool "Fast-NAT support"
-       default n
-
-config MTK_WHNAT_SUPPORT
-	tristate "Wifi Hardware NAT support"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7915
-	depends on MTK_WLAN_HOOK
-	depends on MTK_FAST_NAT_SUPPORT
-	depends on PACKAGE_kmod-hw_nat || PACKAGE_kmod-mediatek_hnat
-	default n
-
-#config CARRIER_DETECTION_SUPPORT
-#	bool "Carrier Detect"
-#	depends on WIFI_DRIVER
-#	default n
-
-config MTK_MEMORY_SHRINK
-	bool "Memory Shrink"
-	depends on MTK_WIFI_DRIVER && MTK_CHIP_MT7626
-	default n
-
-config MTK_RPS_EFFICIENCY
-	bool "RPS Efficiency"
-	depends on MTK_WIFI_DRIVER && MTK_CHIP_MT7626
-	default n
-
-config MTK_RTMP_FLASH_SUPPORT
-	bool "Platform's Flash APIs Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_PRE_CAL_TRX_SET1_SUPPORT
-	bool "Calibration To Flash/BinFile Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RLM_CAL_CACHE_SUPPORT
-	bool "Rlm Calibration Cache Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_PRE_CAL_TRX_SET2_SUPPORT
-	bool "Pre-calibration to Flash Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_CAL_BIN_FILE_SUPPORT
-	bool "Calibration to BinFile Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RF_LOCKDOWN_SUPPORT
-	bool "RF Lockdown Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_LINK_TEST_SUPPORT
-	bool "Link Test Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_ATE_SUPPORT
-	bool "ATE/QA Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_WLAN_SERVICE
-        bool "Wlan Service Library Support"
-        depends on MTK_WIFI_DRIVER
-        default n
-
-config MTK_UAPSD
-	bool "UAPSD support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_TCP_RACK_SUPPORT
-	bool "TCP Reduced ACK  support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_RED_SUPPORT
-        bool "RED (Random Early Drop) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-        default n
-
-config MTK_FQ_SCH_SUPPORT
-        bool "Fair Queueing support"
-        depends on MTK_WIFI_DRIVER
-        depends on MTK_MT_AP_SUPPORT && MTK_VOW_SUPPORT
-        depends on MTK_CHIP_MT7622
-        default y
-
-config MTK_FDB_SUPPORT
-       bool "FW Debug Port"
-       depends on MTK_WIFI_DRIVER
-       default n
-
-endmenu

mt7603/config.in

@@ -1,250 +0,0 @@
-# Kconfig for mtk wifi
-
-config MTK_WIFI_DRIVER
-	bool
-	default y
-	depends on PACKAGE_kmod-mt7615 || PACKAGE_kmod-mt7603
-	select MTK_SUPPORT_OPENWRT
-	select MTK_MT_WIFI
-	select MTK_WIFI_BASIC_FUNC
-
-if MTK_WIFI_DRIVER
-
-menu "First WiFi card"
-choice
-	prompt "Choose First WiFi card"
-	default MTK_FIRST_IF_MT7603E
-
-	config MTK_FIRST_IF_NONE
-	bool "None"
-
-	config MTK_FIRST_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_FIRST_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-
-endchoice
-
-config  MTK_RT_FIRST_CARD
-        int
-        depends on ! MTK_FIRST_IF_NONE
-        default 7603 if MTK_FIRST_IF_MT7603E
-	default 7615 if MTK_FIRST_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_FIRST_CARD
-	string "WiFi driver build directory name"
-	default "rlt_wifi"
-
-config  MTK_RT_FIRST_IF_RF_OFFSET
-        hex "RF offset of 1st card"
-        depends on ! MTK_FIRST_IF_NONE
-        default 0x0
-
-#prompt "WiFi detailed options for 1st card"
-
-choice
-	prompt "EEPROM Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_EEPROM_EFUSE
-
-	config MTK_FIRST_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_FIRST_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_FIRST_IF_EEPROM_EFUSE
-	bool "EFUSE"
-
-endchoice
-
-config MTK_RT_FIRST_CARD_EEPROM
-	string
-	depends on ! MTK_FIRST_IF_NONE
-	default "prom" if MTK_FIRST_IF_EEPROM_PROM
-	default "efuse" if MTK_FIRST_IF_EEPROM_EFUSE
-	default "flash" if MTK_FIRST_IF_EEPROM_FLASH
-
-choice
-	prompt "PA/LNA Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_IPAILNA
-
-	config MTK_FIRST_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_FIRST_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_FIRST_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-menu "Operation Modes for 1st card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-	#select MTK_MT_STA_SUPPORT
-endchoice
-
-source "ap.config.in"
-
-endmenu
-endmenu
-### endmenu for 1st wifi card #######
-
-#### menu starts for 2nd wifi card ###
-menu "Second WiFi card"
-
-choice
-	prompt "Choose Second WiFi card"
-	default MTK_SECOND_IF_MT7615E
-
-	config MTK_SECOND_IF_NONE
-	bool "None"
-
-	config MTK_SECOND_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_SECOND_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-endchoice
-
-config  MTK_RT_SECOND_CARD
-        int
-        depends on ! MTK_SECOND_IF_NONE
-        default 7603 if MTK_SECOND_IF_MT7603E
-	default 7615 if MTK_SECOND_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_SECOND_CARD
-	string "WiFi driver build directory name"
-	default "mt_wifi"
-
-config  MTK_RT_SECOND_IF_RF_OFFSET
-        hex "RF offset of 2nd card"
-        depends on ! MTK_SECOND_IF_NONE
-        default 0x8000
-
-#prompt "WiFi detailed options for 2nd card"
-
-choice
-	prompt "EEPROM Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_EEPROM_EFUSE
-
-	config MTK_SECOND_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_SECOND_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_SECOND_IF_EEPROM_EFUSE
-	bool "EFUSE"
-endchoice
-
-config MTK_RT_SECOND_CARD_EEPROM
-	string
-	depends on ! MTK_SECOND_IF_NONE
-	default "prom" if MTK_SECOND_IF_EEPROM_PROM
-	default "efuse" if MTK_SECOND_IF_EEPROM_EFUSE
-	default "flash" if MTK_SECOND_IF_EEPROM_FLASH
-
-
-choice
-        prompt "PA/LNA Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_IPAILNA
-
-	config MTK_SECOND_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_SECOND_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_SECOND_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-
-menu "Operation Modes for 2nd card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-endchoice
-
-source "ap.config.in"
-
-endmenu
-
-endmenu
-### endmenu for 2nd wifi card #######
-
-
-#### placeholder for 3rd wifi card ###
-config MTK_THIRD_IF_NONE
-	bool
-	default y
-
-config  MTK_RT_THIRD_CARD
-        int
-	default 0
-
-config  MTK_RT_THIRD_IF_RF_OFFSET
-        hex
-	default 0x4000
-
-config MTK_RT_THIRD_CARD_EEPROM
-	string
-	default "efuse"
-### placehlder for 3rd wifi card #######
-
-
-config MTK_MULTI_INF_SUPPORT
-	bool
-	default y if !MTK_FIRST_IF_NONE && !MTK_SECOND_IF_NONE
-
-
-source "common.config.in"
-
-#if MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-#	config MTK_MT_MAC
-#		bool
-#		default y
-#		select MTK_RATE_ADAPTION
-#		select MTK_RATE_ADAPT_AGBS_SUPPORT
-#		select MTK_DOT11_N_SUPPORT
-#		select MTK_DOT11_VHT_AC
-#		select MTK_HDR_TRANS_TX_SUPPORT
-#		select MTK_HDR_TRANS_RX_SUPPORT
-#endif
-
-endif #MTK_WIFI_DRIVER#

mt7603/globalconfig.in

@@ -1,250 +0,0 @@
-# Kconfig for mtk wifi
-
-config MTK_WIFI_DRIVER
-	bool
-	default y
-	depends on (PACKAGE_kmod-mt7615e || PACKAGE_kmod-mt7603e)
-	select MTK_SUPPORT_OPENWRT
-	select MTK_MT_WIFI
-	select MTK_WIFI_BASIC_FUNC
-
-if MTK_WIFI_DRIVER
-
-menu "First WiFi card"
-choice
-	prompt "Choose First WiFi card"
-	default MTK_FIRST_IF_MT7603E
-
-	config MTK_FIRST_IF_NONE
-	bool "None"
-
-	config MTK_FIRST_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_FIRST_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-
-endchoice
-
-config  MTK_RT_FIRST_CARD
-        int
-        depends on ! MTK_FIRST_IF_NONE
-        default 7603 if MTK_FIRST_IF_MT7603E
-	default 7615 if MTK_FIRST_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_FIRST_CARD
-	string "WiFi driver build directory name"
-	default "rlt_wifi"
-
-config  MTK_RT_FIRST_IF_RF_OFFSET
-        hex "RF offset of 1st card"
-        depends on ! MTK_FIRST_IF_NONE
-        default 0x0
-
-#prompt "WiFi detailed options for 1st card"
-
-choice
-	prompt "EEPROM Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_EEPROM_EFUSE
-
-	config MTK_FIRST_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_FIRST_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_FIRST_IF_EEPROM_EFUSE
-	bool "EFUSE"
-
-endchoice
-
-config MTK_RT_FIRST_CARD_EEPROM
-	string
-	depends on ! MTK_FIRST_IF_NONE
-	default "prom" if MTK_FIRST_IF_EEPROM_PROM
-	default "efuse" if MTK_FIRST_IF_EEPROM_EFUSE
-	default "flash" if MTK_FIRST_IF_EEPROM_FLASH
-
-choice
-	prompt "PA/LNA Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_IPAILNA
-
-	config MTK_FIRST_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_FIRST_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_FIRST_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-menu "Operation Modes for 1st card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-	#select MTK_MT_STA_SUPPORT
-endchoice
-
-source "ap.config.in"
-
-endmenu
-endmenu
-### endmenu for 1st wifi card #######
-
-#### menu starts for 2nd wifi card ###
-menu "Second WiFi card"
-
-choice
-	prompt "Choose Second WiFi card"
-	default MTK_SECOND_IF_MT7615E
-
-	config MTK_SECOND_IF_NONE
-	bool "None"
-
-	config MTK_SECOND_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_SECOND_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-endchoice
-
-config  MTK_RT_SECOND_CARD
-        int
-        depends on ! MTK_SECOND_IF_NONE
-        default 7603 if MTK_SECOND_IF_MT7603E
-	default 7615 if MTK_SECOND_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_SECOND_CARD
-	string "WiFi driver build directory name"
-	default "mt_wifi"
-
-config  MTK_RT_SECOND_IF_RF_OFFSET
-        hex "RF offset of 2nd card"
-        depends on ! MTK_SECOND_IF_NONE
-        default 0x8000
-
-#prompt "WiFi detailed options for 2nd card"
-
-choice
-	prompt "EEPROM Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_EEPROM_EFUSE
-
-	config MTK_SECOND_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_SECOND_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_SECOND_IF_EEPROM_EFUSE
-	bool "EFUSE"
-endchoice
-
-config MTK_RT_SECOND_CARD_EEPROM
-	string
-	depends on ! MTK_SECOND_IF_NONE
-	default "prom" if MTK_SECOND_IF_EEPROM_PROM
-	default "efuse" if MTK_SECOND_IF_EEPROM_EFUSE
-	default "flash" if MTK_SECOND_IF_EEPROM_FLASH
-
-
-choice
-        prompt "PA/LNA Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_IPAILNA
-
-	config MTK_SECOND_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_SECOND_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_SECOND_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-
-menu "Operation Modes for 2nd card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-endchoice
-
-source "ap.config.in"
-
-endmenu
-
-endmenu
-### endmenu for 2nd wifi card #######
-
-
-#### placeholder for 3rd wifi card ###
-config MTK_THIRD_IF_NONE
-	bool
-	default y
-
-config  MTK_RT_THIRD_CARD
-        int
-	default 0
-
-config  MTK_RT_THIRD_IF_RF_OFFSET
-        hex
-	default 0x4000
-
-config MTK_RT_THIRD_CARD_EEPROM
-	string
-	default "efuse"
-### placehlder for 3rd wifi card #######
-
-
-config MTK_MULTI_INF_SUPPORT
-	bool
-	default y if !MTK_FIRST_IF_NONE && !MTK_SECOND_IF_NONE
-
-
-source "common.config.in"
-
-#if MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-#	config MTK_MT_MAC
-#		bool
-#		default y
-#		select MTK_RATE_ADAPTION
-#		select MTK_RATE_ADAPT_AGBS_SUPPORT
-#		select MTK_DOT11_N_SUPPORT
-#		select MTK_DOT11_VHT_AC
-#		select MTK_HDR_TRANS_TX_SUPPORT
-#		select MTK_HDR_TRANS_RX_SUPPORT
-#endif
-
-endif #MTK_WIFI_DRIVER#

mt7603/patches/001-mt7603e-initial-iopsys-port.patch

@@ -1,191 +0,0 @@
-diff -uprN a/mt7603_wifi/common/cmm_info.c b/mt7603_wifi/common/cmm_info.c
---- a/mt7603_wifi/common/cmm_info.c	2019-02-22 10:01:55.000000000 +0100
-+++ b/mt7603_wifi/common/cmm_info.c	2019-12-08 21:47:48.553113878 +0100
-@@ -132,7 +132,7 @@ INT Set_DriverVersion_Proc(RTMP_ADAPTER
- {
- #ifdef CONFIG_AP_SUPPORT
- 	IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
--		DBGPRINT(RT_DEBUG_OFF, ("Driver version-%s %s %s\n", AP_DRIVER_VERSION, __DATE__, __TIME__));
-+		DBGPRINT(RT_DEBUG_OFF, ("Driver version-%s\n", AP_DRIVER_VERSION));
- 		DBGPRINT(RT_DEBUG_OFF, ("Driver Patch\n"));
- 		DBGPRINT(RT_DEBUG_OFF, ("001 : 4AC + MGMT PSE queue pkt stuck detect & AP tr_entry is memory currupted\n"));
- 		DBGPRINT(RT_DEBUG_OFF, ("002 : wifi_forward support\n"));
-diff -uprN a/mt7603_wifi/os/linux/rt_linux.c b/mt7603_wifi/os/linux/rt_linux.c
---- a/mt7603_wifi/os/linux/rt_linux.c	2019-02-22 10:01:39.000000000 +0100
-+++ b/mt7603_wifi/os/linux/rt_linux.c	2019-12-08 22:16:27.246150818 +0100
-@@ -47,8 +47,8 @@
- #endif
- 
- #if defined(CONFIG_RA_HW_NAT) || defined(CONFIG_RA_HW_NAT_MODULE)
--#include "../../../../../../../../net/nat/hw_nat/ra_nat.h"
--#include "../../../../../../../../net/nat/hw_nat/frame_engine.h"
-+#include <../net/nat/hw_nat/ra_nat.h>
-+#include <../net/nat/hw_nat/frame_engine.h>
- #endif
- 
- /* TODO */
-@@ -855,18 +855,27 @@ void RtmpOSFileSeek(RTMP_OS_FD osfd, int
- int RtmpOSFileRead(RTMP_OS_FD osfd, char *pDataPtr, int readLen)
- {
- 	/* The object must have a read method */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 19, 0)
- 	if (osfd->f_op && osfd->f_op->read) {
- 		return osfd->f_op->read(osfd, pDataPtr, readLen, &osfd->f_pos);
--	} else {
--		DBGPRINT(RT_DEBUG_ERROR, ("no file read method\n"));
--		return -1;
-+#else
-+		if (osfd->f_mode & FMODE_CAN_READ) {
-+			return __vfs_read(osfd, pDataPtr, readLen,&osfd->f_pos);
-+#endif
-+		} else {
-+			DBGPRINT(RT_DEBUG_ERROR, ("no file read method\n"));
-+			return -1;
-+		}
- 	}
--}
- 
- 
- int RtmpOSFileWrite(RTMP_OS_FD osfd, char *pDataPtr, int writeLen)
- {
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0)
- 	return osfd->f_op->write(osfd, pDataPtr, (size_t) writeLen, &osfd->f_pos);
-+#else
-+	return __vfs_write(osfd, pDataPtr, (size_t) writeLen, &osfd->f_pos);
-+#endif
- }
- 
- 
-diff -uprN a/mt7603_wifi/os/linux/rt_proc.c b/mt7603_wifi/os/linux/rt_proc.c
---- a/mt7603_wifi/os/linux/rt_proc.c	2019-02-22 10:01:39.000000000 +0100
-+++ b/mt7603_wifi/os/linux/rt_proc.c	2019-12-08 21:47:48.553113878 +0100
-@@ -61,7 +61,7 @@ int wl_proc_exit(void);
- #endif /* PROCREG_DIR */
- 
- #ifdef CONFIG_PROC_FS
--extern struct proc_dir_entry *procRegDir;
-+struct proc_dir_entry *procRegDir;
- 
- #ifdef VIDEO_TURBINE_SUPPORT
- extern BOOLEAN UpdateFromGlobal;
-diff -uprN a/mt7603_wifi/os/linux/rt_profile.c b/mt7603_wifi/os/linux/rt_profile.c
---- a/mt7603_wifi/os/linux/rt_profile.c	2019-02-22 10:01:39.000000000 +0100
-+++ b/mt7603_wifi/os/linux/rt_profile.c	2019-12-09 10:27:49.609507632 +0100
-@@ -30,8 +30,8 @@
- #endif
- 
- #if defined (CONFIG_RA_HW_NAT)  || defined (CONFIG_RA_HW_NAT_MODULE)
--#include "../../../../../../../../net/nat/hw_nat/ra_nat.h"
--#include "../../../../../../../../net/nat/hw_nat/frame_engine.h"
-+#include <../net/nat/hw_nat/ra_nat.h>
-+#include <../net/nat/hw_nat/frame_engine.h>
- #endif
- 
- 
-@@ -689,7 +689,11 @@ NDIS_STATUS	RTMPReadParametersHook(RTMP_
- 		{
- #ifndef OS_ABL_SUPPORT
- 			// TODO: need to roll back when convert into OSABL code
--				 fsize = (ULONG)srcf->f_dentry->d_inode->i_size;
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 19, 0)
-+				fsize = (ULONG)srcf->f_dentry->d_inode->i_size;
-+#else
-+				fsize = (ULONG)srcf->f_path.dentry->d_inode->i_size;
-+#endif
- 				if (buf_size < (fsize + 1))
- 					buf_size = fsize + 1;
- #endif /* OS_ABL_SUPPORT */
-diff -uprN a/mt7603_wifi_ap/Makefile b/mt7603_wifi_ap/Makefile
---- a/mt7603_wifi_ap/Makefile	2019-02-22 10:01:27.000000000 +0100
-+++ b/mt7603_wifi_ap/Makefile	2019-12-08 21:52:10.253012796 +0100
-@@ -16,6 +16,90 @@ DRV_NAME = mt7603_wifi
- RT_WIFI_DIR = ../mt7603_wifi
- endif
- 
-+ifeq ($(CONFIG_SUPPORT_OPENWRT),y)
-+###EXTRA_CFLAGS += -DCONFIG_SUPPORT_OPENWRT
-+ifneq ($(CONFIG_RT_FIRST_CARD),)
-+EXTRA_CFLAGS += -DCONFIG_RT_FIRST_CARD=$(CONFIG_RT_FIRST_CARD)
-+EXTRA_CFLAGS += -DCONFIG_RT_FIRST_IF_RF_OFFSET=$(CONFIG_RT_FIRST_IF_RF_OFFSET)
-+endif
-+ifneq ($(CONFIG_RT_SECOND_CARD),)
-+EXTRA_CFLAGS += -DCONFIG_RT_SECOND_CARD=$(CONFIG_RT_SECOND_CARD)
-+EXTRA_CFLAGS += -DCONFIG_RT_SECOND_IF_RF_OFFSET=$(CONFIG_RT_SECOND_IF_RF_OFFSET)
-+endif
-+ifneq ($(CONFIG_RT_THIRD_CARD),)
-+EXTRA_CFLAGS += -DCONFIG_RT_THIRD_CARD=$(CONFIG_RT_THIRD_CARD)
-+EXTRA_CFLAGS += -DCONFIG_RT_THIRD_IF_RF_OFFSET=$(CONFIG_RT_THIRD_IF_RF_OFFSET)
-+endif
-+ifeq ($(CONFIG_FIRST_IF_EEPROM_PROM),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_FIRST_CARD_EEPROM="\"prom\""
-+else
-+ifeq ($(CONFIG_FIRST_IF_EEPROM_EFUSE),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_FIRST_CARD_EEPROM="\"efuse\""
-+else
-+ifeq ($(CONFIG_FIRST_IF_EEPROM_FLASH),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_FIRST_CARD_EEPROM="\"flash\""
-+endif
-+endif
-+endif
-+ifeq ($(CONFIG_SECOND_IF_EEPROM_PROM),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_SECOND_CARD_EEPROM="\"prom\""
-+else
-+ifeq ($(CONFIG_SECOND_IF_EEPROM_EFUSE),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_SECOND_CARD_EEPROM="\"efuse\""
-+else
-+ifeq ($(CONFIG_SECOND_IF_EEPROM_FLASH),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_SECOND_CARD_EEPROM="\"flash\""
-+endif
-+endif
-+endif
-+ifeq ($(CONFIG_THIRD_IF_EEPROM_PROM),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_THIRD_CARD_EEPROM="\"prom\""
-+else
-+ifeq ($(CONFIG_THIRD_IF_EEPROM_EFUSE),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_THIRD_CARD_EEPROM="\"efuse\""
-+else
-+ifeq ($(CONFIG_THIRD_IF_EEPROM_FLASH),y)
-+EXTRA_CFLAGS += -DCONFIG_RT_THIRD_CARD_EEPROM="\"flash\""
-+endif
-+endif
-+endif
-+endif
-+
-+ifeq ($(CONFIG_FIRST_IF_EPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_FIRST_IF_EPAELNA
-+else
-+ifeq ($(CONFIG_FIRST_IF_IPAILNA),y)
-+EXTRA_CFLAGS += -DCONFIG_FIRST_IF_IPAILNA
-+else
-+ifeq ($(CONFIG_FIRST_IF_IPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_FIRST_IF_IPAELNA
-+endif
-+endif
-+endif
-+ifeq ($(CONFIG_SECOND_IF_EPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_SECOND_IF_EPAELNA
-+else
-+ifeq ($(CONFIG_SECOND_IF_IPAILNA),y)
-+EXTRA_CFLAGS += -DCONFIG_SECOND_IF_IPAILNA
-+else
-+ifeq ($(CONFIG_SECOND_IF_IPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_SECOND_IF_IPAELNA
-+endif
-+endif
-+endif
-+ifeq ($(CONFIG_THIRD_IF_EPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_THIRD_IF_EPAELNA
-+else
-+ifeq ($(CONFIG_THIRD_IF_IPAILNA),y)
-+EXTRA_CFLAGS += -DCONFIG_THIRD_IF_IPAILNA
-+else
-+ifeq ($(CONFIG_THIRD_IF_IPAELNA),y)
-+EXTRA_CFLAGS += -DCONFIG_THIRD_IF_IPAELNA
-+endif
-+endif
-+endif
-+
-+
- ########################################################
- # Common files
- ########################################################

mt7615/Makefile

@@ -1,256 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mt7615e
-PKG_VERSION:=5.0.4.0_20190503
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:mediatek/mt7615.git
-PKG_SOURCE_VERSION:=12c69fe1912113d16d17292bcee6415a8c9ab131
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-
-
-PKG_KCONFIG:= \
-	AP_SUPPORT \
-	RT_FIRST_CARD \
-	RT_SECOND_CARD \
-	RT_FIRST_IF_RF_OFFSET \
-	RT_SECOND_IF_RF_OFFSET \
-	MT_WIFI \
-	WIFI_BASIC_FUNC \
-	MT_WIFI_PATH \
-	FIRST_IF_NONE \
-	FIRST_IF_EEPROM_FLASH \
-	FIRST_IF_EEPROM_EFUSE \
-	RT_FIRST_CARD_EEPROM \
-	SECOND_IF_NONE \
-	SECOND_IF_EEPROM_FLASH \
-	SECOND_IF_EEPROM_PROM \
-	SECOND_IF_EEPROM_EFUSE \
-	RT_SECOND_CARD_EEPROM \
-	MULTI_INF_SUPPORT \
-	WIFI_BASIC_FUNC \
-	WIRELESS_EXT \
-	WEXT_SPY \
-	WEXT_PRIV \
-	DOT11_N_SUPPORT \
-	DOT11_VHT_AC \
-	DOT11_HE_AX \
-	CFG_SUPPORT_FALCON_MURU \
-	CFG_SUPPORT_FALCON_TXCMD_DBG \
-	CFG_SUPPORT_FALCON_SR \
-	WIFI_DRIVER \
-	G_BAND_256QAM_SUPPORT \
-	BRCM_256QAM_SUPPORT \
-	ICAP_SUPPORT \
-	MT_AP_SUPPORT \
-	BACKGROUND_SCAN_SUPPORT \
-	SMART_CARRIER_SENSE_SUPPORT \
-	SCS_FW_OFFLOAD \
-	THERMAL_PROTECT_SUPPORT \
-	MT_DFS_SUPPORT \
-	HDR_TRANS_TX_SUPPORT \
-	CHIP_MT7615E \
-	HDR_TRANS_RX_SUPPORT \
-	SUPPORT_DYNAMIC_TXOP \
-	WSC_INCLUDED \
-	MT_STA_SUPPORT \
-	WSC_V2_SUPPORT \
-	DOT11W_PMF_SUPPORT \
-	PASSPOINT_R2 \
-	TXBF_SUPPORT \
-	IGMP_SNOOP_SUPPORT \
-	RATE_ADAPTION \
-	RATE_ADAPT_AGBS_SUPPORT \
-	RTMP_FLASH_SUPPORT \
-	ATE_SUPPORT \
-	WLAN_SERVICE \
-	UAPSD \
-	RLT_MAC \
-	RLT_BBP \
-	RLT_RF \
-	RTMP_MAC \
-	RTMP_BBP \
-	RTMP_RF \
-	RTMP_PCI_SUPPORT \
-	RTMP_USB_SUPPORT \
-	RTMP_RBUS_SUPPORT \
-	WIFI_MODE_AP \
-	WIFI_MODE_STA \
-	WIRELESS_EXT \
-	WEXT_SPY \
-	WEXT_PRIV \
-	WDS_SUPPORT \
-	MBSS_SUPPORT \
-	APCLI_SUPPORT \
-	APCLI_CERT_SUPPORT \
-	APCLI_CONNECTION_TRIAL \
-	MAC_REPEATER_SUPPORT \
-	RALINK_RT6352 \
-	RALINK_MT7620 \
-	RALINK_MT7603E \
-	CON_WPS_SUPPORT \
-	VOW_SUPPORT \
-	BAND_STEERING \
-	TXOP_ARBITER \
-	CFG_SUPPORT_DYNAMIC_TXOP \
-	WIFI_MODE_BOTH \
-	WIFI_RLT_MAC \
-	RLT_MAC \
-	WIFI_RTMP_MAC \
-	RTMP_MAC \
-	WIFI_MT_MAC \
-	CHIP_MT7603E \
-	CHIP_MT7615E \
-	MT_MAC \
-	RATE_ADAPTION \
-	SUPPORT_OPENWRT \
-	SDK_USER_LIGHTY \
-	MUMIMO_SUPPORT \
-	MU_RA_SUPPORT \
-	LED_CONTROL_SUPPORT \
-	RA_HW_NAT \
-	RA_HW_NAT_WIFI_NEW_ARCH \
-	CFG80211_SUPPORT \
-	SER_SUPPORT \
-	GREENAP_SUPPORT \
-	RADIUS_ACCOUNTING_SUPPORT \
-	TPC_SUPPORT \
-	RLM_CAL_CACHE_SUPPORT \
-	CAL_BIN_FILE_SUPPORT \
-	RF_LOCKDOWN_SUPPORT \
-	PASSPOINT_R2 \
-	RED_SUPPORT \
-	FIRST_IF_EPAELNA \
-	FIRST_IF_IPAILNA \
-	FIRST_IF_IPAELNA \
-	FIRST_IF_EPAILNA \
-	SECOND_IF_EPAELNA \
-	SECOND_IF_IPAILNA \
-	SECOND_IF_IPAELNA \
-	SECOND_IF_EPAILNA \
-	THIRD_IF_EPAELNA \
-	THIRD_IF_IPAILNA \
-	THIRD_IF_IPAELNA \
-	THIRD_IF_EPAILNA \
-	WIFI_PKT_FWD \
-	DOT11K_RRM_SUPPORT \
-	DOT11R_FT_SUPPORT \
-	ENTERPRISE_AP_SUPPORT \
-	WIFI_EAP_FEATURE \
-	RADIUS_MAC_AUTH_SUPPORT \
-	VLAN_SUPPORT \
-	DYNAMIC_VLAN_SUPPORT \
-	CUSTOMISED_HOSTAPD_SUPPORT \
-	APCLI_STA_SUPPORT \
-	WDS_STA_SUPPORT \
-	MBSS_AS_WDS_AP_SUPPORT \
-	MBO_SUPPORT \
-	MAP_SUPPORT \
-	WPA3_SUPPORT \
-	OWE_SUPPORT \
-	WIFI_PKT_FWD_V1 \
-	FIRST_IF_MT7615E \
-	FIRST_IF_MT7622 \
-	FIRST_IF_MT7626 \
-	FIRST_IF_AXE \
-	FIRST_IF_MT7915 \
-	SECOND_IF_MT7615E \
-	SECOND_IF_AXE \
-	THIRD_IF_NONE \
-	THIRD_IF_MT7615E \
-	CHIP_AXE \
-	CHIP_MT7915 \
-	RT_THIRD_CARD \
-	RT_THIRD_IF_RF_OFFSET \
-	THIRD_IF_EEPROM_FLASH \
-	THIRD_IF_EEPROM_PROM \
-	THIRD_IF_EEPROM_EFUSE \
-	RT_THIRD_CARD_EEPROM \
-	SPECTRUM_SUPPORT \
-	PRE_CAL_TRX_SET1_SUPPORT \
-	MWDS \
-	MCAST_RATE_SPECIFIC \
-	WLAN_HOOK \
-	COEX_SUPPORT \
-	EASY_SETUP_SUPPORT \
-	EVENT_NOTIFIER_SUPPORT \
-	AIR_MONITOR \
-	OFFCHANNEL_SCAN_FEATURE \
-	WNM_SUPPORT \
-	INTERWORKING \
-	LINUX_NET_TXQ_SUPPORT \
-	CHIP_MT7622 \
-	CHIP_MT7626 \
-	MEMORY_SHRINK \
-	RPS_EFFICIENCY \
-	WHNAT_SUPPORT \
-	FAST_NAT_SUPPORT \
-	PRE_CAL_TRX_SET2_SUPPORT \
-	LINK_TEST_SUPPORT \
-	TCP_RACK_SUPPORT \
-	FQ_SCH_SUPPORT \
-	BRCM_256QAM_SUPPORT \
-	VHT_TXBF_2G_EPIGRAM_IE_SUPPORT \
-	DSCP_QOS_MAP_SUPPORT \
-	DSCP_PRI_SUPPORT \
-	PCIE_ASPM_DYM_CTRL_SUPPORT \
-	MIN_PHY_RATE_SUPPORT \
-	FAST_UP_RATE_SUPPORT \
-	TXRX_STAT_SUPPORT \
-	VENDOR_FEATURE11_SUPPORT \
-	WIFI_TWT_SUPPORT \
-	SINGLE_SKU \
-	SNIFFER_SUPPORT \
-
-PKG_CONFIG_DEPENDS:=$(foreach c, $(PKG_KCONFIG),$(if $(CONFIG_MTK_$c),CONFIG_$(c)))
-
-include $(INCLUDE_DIR)/package.mk
-
-#TAR_CMD=$(HOST_TAR) -C $(1)/ $(TAR_OPTIONS)
-
-define KernelPackage/mt7615e
-  CATEGORY:=Mediatek drivers
-  TITLE:=WiFi drivers
-  DEPENDS:= +wifi-profile
-ifneq ($(CONFIG_MTK_FAST_NAT_SUPPORT), )
-ifneq ($(CONFIG_NET_MEDIATEK_HNAT), )
-  DEPENDS+=+kmod-mediatek_hnat
-endif
-endif
-ifneq ($(CONFIG_MTK_WHNAT_SUPPORT), )
-  FILES:=$(PKG_BUILD_DIR)/mt_wifi_ap/mt_wifi.ko \
-	$(PKG_BUILD_DIR)/mt_wifi/embedded/plug_in/whnat/mt_whnat.ko
-  AUTOLOAD:=$(call AutoProbe,mt_wifi mt_whnat)
-else
-  FILES:=$(PKG_BUILD_DIR)/mt_wifi_ap/mt_wifi.ko
-  AUTOLOAD:=$(call AutoProbe,mt_wifi)
-endif
-  MENU:=1
-endef
-
-define KernelPackage/mt7615e/config
-	source "$(SOURCE)/globalconfig.in"
-endef
-
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		SUBDIRS="$(PKG_BUILD_DIR)/mt_wifi_ap" \
-		$(foreach c, $(PKG_KCONFIG),$(if $(CONFIG_MTK_$c),CONFIG_$(c)=$(CONFIG_MTK_$(c)))) \
-		CONFIG_SUPPORT_OPENWRT=y CONFIG_MT_AP_SUPPORT=m CONFIG_CHIP_MT7615E=y CONFIG_MT_MAC=y \
-		CONFIG_FIRST_IF_MT7603E=y CONFIG_SECOND_IF_MT7615E=y \
-		modules
-endef
-
-define KernelPackage/mt7615e/install
-	$(INSTALL_DIR) $(1)/etc/wireless
-	$(CP) ./files/l1profile.dat $(1)/etc/wireless
-endef
-
-$(eval $(call KernelPackage,mt7615e))

mt7615/ap.config.in

@@ -1,317 +0,0 @@
-config MTK_MT_AP_SUPPORT
-	bool
-	default y
-	depends on MTK_WIFI_MODE_AP
-
-if MTK_MT_AP_SUPPORT
-
-config MTK_WDS_SUPPORT
-	bool "WDS"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_MBSS_SUPPORT
-	bool "Multi-BSS (MBSSID)"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_APCLI_SUPPORT
-	bool "AP-Client Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_APCLI_CERT_SUPPORT
-	bool "AP-Client TGn Cert Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-        default n
-
-config MTK_MAC_REPEATER_SUPPORT
-	bool "MAC Repeater Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-	default y
-
-config MTK_APCLI_CONNECTION_TRIAL
-        bool "AP-Client Trial Connection"
-        depends on MTK_MT_AP_SUPPORT
-        depends on MTK_APCLI_SUPPORT
-        default n
-
-config MTK_MWDS
-	bool "Mixed WDS (MWDS)"
-	depends on MTK_MT_AP_SUPPORT
-	select MTK_APCLI_SUPPORT
-	default n
-
-config MTK_MUMIMO_SUPPORT
-        bool "MU-MIMO Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_MU_RA_SUPPORT
-        default y
-
-config MTK_MU_RA_SUPPORT
-  	bool "MU-RGA Support"
-  	depends on MTK_MUMIMO_SUPPORT
-
-config MTK_DOT11R_FT_SUPPORT
-	bool "IEEE 802.11r Fast BSS Transition"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_DOT11K_RRM_SUPPORT
-	bool "IEEE 802.11k Radio Resource Management"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_IGMP_SNOOP_SUPPORT
-	bool "IGMP snooping (for multicast --> unicast)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_OFFCHANNEL_SCAN_FEATURE
-	bool "Off-Channel scan support (Channel Quality Monitor)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_SNIFFER_SUPPORT
-	bool "Sniffer support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_ENTERPRISE_AP_SUPPORT
-	bool "Enterprise AP Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_WIFI_EAP_FEATURE
-	bool "EAP Feature"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RADIUS_MAC_AUTH_SUPPORT
-        bool "RADIUS MAC Auth Support"
-        depends on MTK_ENTERPRISE_AP_SUPPORT
-        depends on MTK_CFG80211_SUPPORT
-        default n
-
-config MTK_VLAN_SUPPORT
-	bool "VLAN Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_ENTERPRISE_AP_SUPPORT
-	default n
-
-config MTK_DYNAMIC_VLAN_SUPPORT
-	bool "Dynamic VLAN Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_ENTERPRISE_AP_SUPPORT
-	default n
-
-config MTK_CFG80211_SUPPORT
-	bool "Linux CFG80211 support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-#CUSTOMISED HOSTAPD
-config MTK_CUSTOMISED_HOSTAPD_SUPPORT
-	bool "Customised Hostapd Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#APCLI STA
-config MTK_APCLI_STA_SUPPORT
-	bool "APCLI STA Support"
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#WDS STA
-config MTK_WDS_STA_SUPPORT
-	bool "WDS STA Support"
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_CFG80211_SUPPORT
-	default n
-
-#WDS AP
-config MTK_MBSS_AS_WDS_AP_SUPPORT
-	bool "MBSS as WDS AP Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_MBSS_SUPPORT
-	default n
-
-config MTK_DSCP_QOS_MAP_SUPPORT
-	bool "Dscp Qos Mapping Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_DSCP_PRI_SUPPORT
-	bool "Dscp Priority Mapping Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_MIN_PHY_RATE_SUPPORT
-        bool "Minimum PHY rate support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_FAST_UP_RATE_SUPPORT
-        bool "Fast UP rate support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_CON_WPS_SUPPORT
-	bool "Concurrent WPS Support"
-	depends on MTK_MT_AP_SUPPORT
-	depends on MTK_APCLI_SUPPORT
-	depends on MTK_WSC_INCLUDED
-	depends on MTK_WSC_V2_SUPPORT
-	default n
-
-config MTK_MCAST_RATE_SPECIFIC
-	bool "User specific tx rate of mcast pkt"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_VOW_SUPPORT
-	bool "MediaAir (VOW) support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_BAND_STEERING
-	bool "Band Steering"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_LED_CONTROL_SUPPORT
-	bool "LED Control Support"
-	default n
-
-config MTK_WLAN_HOOK
-       bool "WLAN hook Support"
-       depends on MTK_WIFI_DRIVER
-       default n
-
-config MTK_RADIUS_ACCOUNTING_SUPPORT
-	bool "Radius Accounting Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_GREENAP_SUPPORT
-	bool "GreenAP Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_TXRX_STAT_SUPPORT
-	bool "Tx/Rx Stats Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_VENDOR_FEATURE11_SUPPORT
-        bool "Enable Vendor-11 Features"
-        depends on MTK_WIFI_DRIVER
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_PCIE_ASPM_DYM_CTRL_SUPPORT
-	bool "Pcie Aspm Dynamic Control Support"
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_COEX_SUPPORT
-	bool "Coex Support"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_EASY_SETUP_SUPPORT
-	bool "Whole Home Coverage - Easy Setup"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_EVENT_NOTIFIER_SUPPORT
-	bool "Whole Home Coverage - Event Notifier"
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_AIR_MONITOR
-        bool "Air Monitor"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_WNM_SUPPORT
-        bool "IEEE 802.11v WNM Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_INTERWORKING
-        bool "IEEE 802.11u Interworking"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_LINUX_NET_TXQ_SUPPORT
-	bool "NET TX Queue Support"
-	default n
-
-config  MTK_WPA3_SUPPORT
-        bool "WPA3 Support"
-        depends on MTK_MT_AP_SUPPORT
-        default y
-
-config  MTK_OWE_SUPPORT
-        bool "Enhanced Open Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config  MTK_SINGLE_SKU
-        bool "Single SKU Support"
-        depends on MTK_MT_AP_SUPPORT
-        default n
-
-config MTK_ICAP_SUPPORT
-	bool "ICAP Support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_SPECTRUM_SUPPORT
-	bool "Wifi Spectrum Mgmt Support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT
-	default y
-
-config MTK_FTM_SUPPORT
-	bool "FTM Support"
-	depends on MTK_WIFI_DRIVER
-	select MTK_PASSPOINT_R2
-	default n
-
-config MTK_PASSPOINT_R2
-	bool "Passpoint Release-2 Support"
-	depends on MTK_WIFI_DRIVER
-	select MTK_DOT11W_PMF_SUPPORT
-	depends on MTK_MT_AP_SUPPORT
-	default n
-
-config MTK_MBO_SUPPORT
-        bool "MBO Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_INTERWORKING
-        select MTK_WNM_SUPPORT
-        select MTK_DOT11K_RRM_SUPPORT
-        select MTK_DOT11R_FT_SUPPORT
-        select MTK_DOT11W_PMF_SUPPORT
-        default n
-
-config MTK_MAP_SUPPORT
-        bool "Multi-AP (MAP) Support"
-        depends on MTK_WIFI_DRIVER
-        select MTK_INTERWORKING
-        select MTK_WNM_SUPPORT
-        select MTK_DOT11K_RRM_SUPPORT
-        select MTK_DOT11R_FT_SUPPORT
-        select MTK_DOT11W_PMF_SUPPORT
-        default n
-
-endif  #MTK_MT_AP_SUPPORT

mt7615/common.config.in

@@ -1,250 +0,0 @@
-#mtk wifi common optiions
-
-menu "Common WiFi options"
-
-config MTK_WIFI_BASIC_FUNC
-	bool "Linux Wireless Extension support (for iwconfig, iwpriv etc.)"
-	select MTK_WIRELESS_EXT
-	select MTK_WEXT_SPY
-	select MTK_WEXT_PRIV
-
-config MTK_DOT11_N_SUPPORT
-	bool "IEEE 802.11n support"
-	default y
-
-config MTK_DOT11_VHT_AC
-	bool "IEEE 802.11ac support"
-	depends on MTK_DOT11_N_SUPPORT
-	default y
-
-config MTK_DOT11_HE_AX
-	bool "IEEE 802.11ax support"
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_MURU
-	bool "MURU support"
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_TXCMD_DBG
-	bool "TXCMD DBG support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_VHT_AC
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_CFG_SUPPORT_FALCON_SR
-	bool "Spatial Reuse (SR) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_CHIP_MT7915
-	default y
-
-config MTK_WIFI_TWT_SUPPORT
-	bool "Target Wake Time (TWT) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_HE_AX
-	depends on MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_G_BAND_256QAM_SUPPORT
-	bool "2.4G 256-QAM support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_DOT11_VHT_AC
-        default y
-
-config MTK_BRCM_256QAM_SUPPORT
-	bool "BRCM 2.4G 256-QAM support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_G_BAND_256QAM_SUPPORT
-	default n
-
-config MTK_VHT_TXBF_2G_EPIGRAM_IE_SUPPORT
-	bool "BRCM 2.4G VHT Sounding support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_MT_DFS_SUPPORT
-	bool "IEEE 802.11h DFS Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_TPC_SUPPORT
-	bool "IEEE 802.11h TPC Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_BACKGROUND_SCAN_SUPPORT
-	bool "Background Scan Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_SMART_CARRIER_SENSE_SUPPORT
-	bool "Smart Carrier Sense Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_THERMAL_PROTECT_SUPPORT
-        bool "Thermal Protection"
-        depends on MTK_WIFI_DRIVER && MTK_SMART_CARRIER_SENSE_SUPPORT
-        default n
-
-config MTK_SCS_FW_OFFLOAD
-        bool "SCS Fw Offload Support"
-        depends on MTK_WIFI_DRIVER && MTK_SMART_CARRIER_SENSE_SUPPORT
-        default n
-
-config MTK_HDR_TRANS_TX_SUPPORT
-	bool "Tx Header Translation"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_HDR_TRANS_RX_SUPPORT
-	bool "Rx Header Translation"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-	default y
-
-config MTK_DBDC_MODE
-	bool "Dual-Band Dual-Concurrent (DBDC) mode support"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7626 || MTK_CHIP_MT7915
-	select MULTI_PROFILE_SUPPORT
-	select DEFAULT_5G_PROFILE
-	default y
-
-config MTK_MULTI_PROFILE_SUPPORT
-        bool "Multi Profile Support"
-        depends on MTK_DBDC_MODE
-        default n
-
-config MTK_DEFAULT_5G_PROFILE
-	bool "5G default profile for DBDC"
-	depends on MTK_DBDC_MODE
-	default y
-
-config MTK_WSC_INCLUDED
-	bool "WiFi Simple Config (WSC) or WPS"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_WSC_V2_SUPPORT
-	bool "WiFi Simple Config ver.2 (WPS 2.0)"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_DOT11W_PMF_SUPPORT
-	bool "IEEE 802.11w PMF support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_TXBF_SUPPORT
-	bool "Tx Beam Forming Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_FAST_NAT_SUPPORT
-       bool "Fast-NAT support"
-       default n
-
-config MTK_WHNAT_SUPPORT
-	tristate "Wifi Hardware NAT support"
-	depends on MTK_CHIP_MT7615E || MTK_CHIP_MT7915
-	depends on MTK_WLAN_HOOK
-	depends on MTK_FAST_NAT_SUPPORT
-	depends on PACKAGE_kmod-hw_nat || PACKAGE_kmod-mediatek_hnat
-	default n
-
-#config CARRIER_DETECTION_SUPPORT
-#	bool "Carrier Detect"
-#	depends on WIFI_DRIVER
-#	default n
-
-config MTK_MEMORY_SHRINK
-	bool "Memory Shrink"
-	depends on MTK_WIFI_DRIVER && MTK_CHIP_MT7626
-	default n
-
-config MTK_RPS_EFFICIENCY
-	bool "RPS Efficiency"
-	depends on MTK_WIFI_DRIVER && MTK_CHIP_MT7626
-	default n
-
-config MTK_RTMP_FLASH_SUPPORT
-	bool "Platform's Flash APIs Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_PRE_CAL_TRX_SET1_SUPPORT
-	bool "Calibration To Flash/BinFile Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RLM_CAL_CACHE_SUPPORT
-	bool "Rlm Calibration Cache Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_PRE_CAL_TRX_SET2_SUPPORT
-	bool "Pre-calibration to Flash Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_CAL_BIN_FILE_SUPPORT
-	bool "Calibration to BinFile Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_RF_LOCKDOWN_SUPPORT
-	bool "RF Lockdown Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_LINK_TEST_SUPPORT
-	bool "Link Test Support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_ATE_SUPPORT
-	bool "ATE/QA Support"
-	depends on MTK_WIFI_DRIVER
-	default y
-
-config MTK_WLAN_SERVICE
-        bool "Wlan Service Library Support"
-        depends on MTK_WIFI_DRIVER
-        default n
-
-config MTK_UAPSD
-	bool "UAPSD support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-	default y
-
-config MTK_TCP_RACK_SUPPORT
-	bool "TCP Reduced ACK  support"
-	depends on MTK_WIFI_DRIVER
-	default n
-
-config MTK_RED_SUPPORT
-        bool "RED (Random Early Drop) support"
-	depends on MTK_WIFI_DRIVER
-	depends on MTK_MT_AP_SUPPORT || MTK_MT_STA_SUPPORT
-        default n
-
-config MTK_FQ_SCH_SUPPORT
-        bool "Fair Queueing support"
-        depends on MTK_WIFI_DRIVER
-        depends on MTK_MT_AP_SUPPORT && MTK_VOW_SUPPORT
-        depends on MTK_CHIP_MT7622
-        default y
-
-config MTK_FDB_SUPPORT
-       bool "FW Debug Port"
-       depends on MTK_WIFI_DRIVER
-       default n
-
-endmenu

mt7615/config.in

@@ -1,250 +0,0 @@
-# Kconfig for mtk wifi
-
-config MTK_WIFI_DRIVER
-	bool
-	default y
-	depends on PACKAGE_kmod-mt7615 || PACKAGE_kmod-mt7603
-	select MTK_SUPPORT_OPENWRT
-	select MTK_MT_WIFI
-	select MTK_WIFI_BASIC_FUNC
-
-if MTK_WIFI_DRIVER
-
-menu "First WiFi card"
-choice
-	prompt "Choose First WiFi card"
-	default MTK_FIRST_IF_MT7603E
-
-	config MTK_FIRST_IF_NONE
-	bool "None"
-
-	config MTK_FIRST_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_FIRST_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-
-endchoice
-
-config  MTK_RT_FIRST_CARD
-        int
-        depends on ! MTK_FIRST_IF_NONE
-        default 7603 if MTK_FIRST_IF_MT7603E
-	default 7615 if MTK_FIRST_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_FIRST_CARD
-	string "WiFi driver build directory name"
-	default "rlt_wifi"
-
-config  MTK_RT_FIRST_IF_RF_OFFSET
-        hex "RF offset of 1st card"
-        depends on ! MTK_FIRST_IF_NONE
-        default 0x0
-
-#prompt "WiFi detailed options for 1st card"
-
-choice
-	prompt "EEPROM Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_EEPROM_EFUSE
-
-	config MTK_FIRST_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_FIRST_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_FIRST_IF_EEPROM_EFUSE
-	bool "EFUSE"
-
-endchoice
-
-config MTK_RT_FIRST_CARD_EEPROM
-	string
-	depends on ! MTK_FIRST_IF_NONE
-	default "prom" if MTK_FIRST_IF_EEPROM_PROM
-	default "efuse" if MTK_FIRST_IF_EEPROM_EFUSE
-	default "flash" if MTK_FIRST_IF_EEPROM_FLASH
-
-choice
-	prompt "PA/LNA Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_IPAILNA
-
-	config MTK_FIRST_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_FIRST_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_FIRST_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-menu "Operation Modes for 1st card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-	#select MTK_MT_STA_SUPPORT
-endchoice
-
-source "ap.config.in"
-
-endmenu
-endmenu
-### endmenu for 1st wifi card #######
-
-#### menu starts for 2nd wifi card ###
-menu "Second WiFi card"
-
-choice
-	prompt "Choose Second WiFi card"
-	default MTK_SECOND_IF_MT7615E
-
-	config MTK_SECOND_IF_NONE
-	bool "None"
-
-	config MTK_SECOND_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_SECOND_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-endchoice
-
-config  MTK_RT_SECOND_CARD
-        int
-        depends on ! MTK_SECOND_IF_NONE
-        default 7603 if MTK_SECOND_IF_MT7603E
-	default 7615 if MTK_SECOND_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_SECOND_CARD
-	string "WiFi driver build directory name"
-	default "mt_wifi"
-
-config  MTK_RT_SECOND_IF_RF_OFFSET
-        hex "RF offset of 2nd card"
-        depends on ! MTK_SECOND_IF_NONE
-        default 0x8000
-
-#prompt "WiFi detailed options for 2nd card"
-
-choice
-	prompt "EEPROM Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_EEPROM_EFUSE
-
-	config MTK_SECOND_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_SECOND_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_SECOND_IF_EEPROM_EFUSE
-	bool "EFUSE"
-endchoice
-
-config MTK_RT_SECOND_CARD_EEPROM
-	string
-	depends on ! MTK_SECOND_IF_NONE
-	default "prom" if MTK_SECOND_IF_EEPROM_PROM
-	default "efuse" if MTK_SECOND_IF_EEPROM_EFUSE
-	default "flash" if MTK_SECOND_IF_EEPROM_FLASH
-
-
-choice
-        prompt "PA/LNA Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_IPAILNA
-
-	config MTK_SECOND_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_SECOND_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_SECOND_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-
-menu "Operation Modes for 2nd card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-endchoice
-
-source "ap.config.in"
-
-endmenu
-
-endmenu
-### endmenu for 2nd wifi card #######
-
-
-#### placeholder for 3rd wifi card ###
-config MTK_THIRD_IF_NONE
-	bool
-	default y
-
-config  MTK_RT_THIRD_CARD
-        int
-	default 0
-
-config  MTK_RT_THIRD_IF_RF_OFFSET
-        hex
-	default 0x4000
-
-config MTK_RT_THIRD_CARD_EEPROM
-	string
-	default "efuse"
-### placehlder for 3rd wifi card #######
-
-
-config MTK_MULTI_INF_SUPPORT
-	bool
-	default y if !MTK_FIRST_IF_NONE && !MTK_SECOND_IF_NONE
-
-
-source "common.config.in"
-
-#if MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-#	config MTK_MT_MAC
-#		bool
-#		default y
-#		select MTK_RATE_ADAPTION
-#		select MTK_RATE_ADAPT_AGBS_SUPPORT
-#		select MTK_DOT11_N_SUPPORT
-#		select MTK_DOT11_VHT_AC
-#		select MTK_HDR_TRANS_TX_SUPPORT
-#		select MTK_HDR_TRANS_RX_SUPPORT
-#endif
-
-endif #MTK_WIFI_DRIVER#

mt7615/defconfig.in

@@ -1,60 +0,0 @@
-#defconfig for mt7615
-CONFIG_WIFI_DRIVER=y
-CONFIG_SUPPORT_OPENWRT=y
-CONFIG_RT_FIRST_CARD=7603
-CONFIG_RT_FIRST_IF_RF_OFFSET=0x0
-CONFIG_FIRST_IF_EEPROM_EFUSE=y
-CONFIG_RT_FIRST_CARD_EEPROM="efuse"
-CONFIG_FIRST_IF_IPAILNA=y
-CONFIG_RT_SECOND_CARD=7615
-CONFIG_RT_SECOND_IF_RF_OFFSET=0x8000
-CONFIG_SECOND_IF_EEPROM_EFUSE=y
-CONFIG_RT_SECOND_CARD_EEPROM="efuse"
-CONFIG_SECOND_IF_IPAILNA=y
-CONFIG_RT_THIRD_CARD=0
-CONFIG_RT_THIRD_IF_RF_OFFSET=0x4000
-CONFIG_RT_THIRD_CARD_EEPROM="efuse"
-CONFIG_MULTI_INF_SUPPORT=y
-CONFIG_FIRST_IF_MT7603E=y
-CONFIG_SECOND_IF_MT7615E=y
-CONFIG_THIRD_IF_NONE=y
-CONFIG_WIFI_BASIC_FUNC=y
-CONFIG_DOT11_N_SUPPORT=y
-CONFIG_DOT11_VHT_AC=y
-CONFIG_G_BAND_256QAM_SUPPORT=y
-CONFIG_ICAP_SUPPORT=y
-CONFIG_MT_MAC=y
-#CONFIG_MT_AP_SUPPORT=y
-CONFIG_MT_DFS_SUPPORT=y
-CONFIG_BACKGROUND_SCAN_SUPPORT=y
-CONFIG_SMART_CARRIER_SENSE_SUPPORT=y
-CONFIG_WSC_INCLUDED=y
-CONFIG_WSC_V2_SUPPORT=y
-CONFIG_DOT11W_PMF_SUPPORT=y
-CONFIG_TXBF_SUPPORT=y
-CONFIG_IGMP_SNOOP_SUPPORT=y
-CONFIG_RTMP_FLASH_SUPPORT=y
-CONFIG_ATE_SUPPORT=y
-CONFIG_UAPSD=y
-CONFIG_WIFI_MODE_AP=y
-CONFIG_WDS_SUPPORT=y
-CONFIG_MBSS_SUPPORT=y
-CONFIG_APCLI_SUPPORT=y
-CONFIG_MAC_REPEATER_SUPPORT=y
-CONFIG_VOW_SUPPORT=y
-CONFIG_BAND_STEERING=y
-CONFIG_MUMIMO_SUPPORT=y
-CONFIG_MU_RA_SUPPORT=y
-CONFIG_GREENAP_SUPPORT=y
-CONFIG_TPC_SUPPORT=y
-CONFIG_RLM_CAL_CACHE_SUPPORT=y
-CONFIG_CAL_BIN_FILE_SUPPORT=y
-CONFIG_WIFI_EAP_FEATURE=y
-CONFIG_WPA3_SUPPORT=y
-CONFIG_SPECTRUM_SUPPORT=y
-CONFIG_PRE_CAL_TRX_SET1_SUPPORT=y
-CONFIG_MCAST_RATE_SPECIFIC=y
-CONFIG_PRE_CAL_TRX_SET2_SUPPORT=y
-CONFIG_PCIE_ASPM_DYM_CTRL_SUPPORT=y
-CONFIG_MT_AP_SUPPORT=m
-CONFIG_CHIP_MT7615E=y

mt7615/files/iNic_ap.dat

@@ -1,406 +0,0 @@
-Default
-AccessControlList0=
-AccessControlList1=
-AccessControlList10=
-AccessControlList11=
-AccessControlList12=
-AccessControlList13=
-AccessControlList14=
-AccessControlList15=
-AccessControlList2=
-AccessControlList3=
-AccessControlList4=
-AccessControlList5=
-AccessControlList6=
-AccessControlList7=
-AccessControlList8=
-AccessControlList9=
-AccessPolicy0=0
-AccessPolicy1=0
-AccessPolicy10=0
-AccessPolicy11=0
-AccessPolicy12=0
-AccessPolicy13=0
-AccessPolicy14=0
-AccessPolicy15=0
-AccessPolicy2=0
-AccessPolicy3=0
-AccessPolicy4=0
-AccessPolicy5=0
-AccessPolicy6=0
-AccessPolicy7=0
-AccessPolicy8=0
-AccessPolicy9=0
-AckPolicy=0;0;0;0
-APACM=0;0;0;0
-APAifsn=3;7;1;1
-ApCliAuthMode=
-ApCliBssid=
-ApCliDefaultKeyID=
-ApCliEnable=
-ApCliEncrypType=
-ApCliKey1Str=
-ApCliKey1Str1=
-ApCliKey1Type=
-ApCliKey2Str=
-ApCliKey2Str1=
-ApCliKey2Type=
-ApCliKey3Str=
-ApCliKey3Str1=
-ApCliKey3Type=
-ApCliKey4Str=
-ApCliKey4Str1=
-ApCliKey4Type=
-ApCliSsid=
-ApCliWirelessMode=
-ApCliWPAPSK=
-ApCliWPAPSK1=
-APCwmax=6;10;4;3
-APCwmin=4;4;3;2
-APSDCapable=1
-APTxop=0;0;94;47
-AuthMode=OPEN
-AutoChannelSelect=0
-AutoChannelSkipList=
-AutoProvisionEn=0
-BandSteering=0
-BasicRate=15
-BeaconPeriod=100
-BFBACKOFFenable=0
-BgndScanSkipCh=
-BGProtection=0
-BndStrgBssIdx=
-BSSACM=0;0;0;0
-BSSAifsn=3;7;2;2
-BSSCwmax=10;10;4;3
-BSSCwmin=4;4;3;2
-BssidNum=1
-BSSTxop=0;0;94;47
-BW_Enable=0
-BW_Guarantee_Rate=
-BW_Maximum_Rate=
-BW_Priority=
-BW_Root=0
-CalCacheApply=0
-CarrierDetect=0
-Channel=100
-ChannelGrp=
-CountryCode=US
-CountryRegion=5
-CountryRegionABand=7
-CP_SUPPORT=2
-CSPeriod=6
-DBDC_MODE=0
-DebugFlags=0
-DefaultKeyID=1
-DfsCalibration=0
-DfsEnable=0
-DfsFalseAlarmPrevent=1
-DfsZeroWait=0
-DfsZeroWaitCacTime=255
-DisableOLBC=0
-DtimPeriod=1
-E2pAccessMode=1
-EAPifname=br0
-EDCCAEnable=1
-EncrypType=NONE
-EthConvertMode=dongle
-EtherTrafficBand=0
-Ethifname=
-ETxBfEnCond=1
-FineAGC=0
-FixedTxMode=
-ForceRoamSupport=
-FragThreshold=2346
-FreqDelta=0
-FtSupport=0
-GreenAP=1
-G_BAND_256QAM=1
-HideSSID=0
-HT_AMSDU=1
-HT_AutoBA=1
-HT_BADecline=0
-HT_BAWinSize=64
-HT_BSSCoexistence=1
-HT_BW=1
-HT_DisallowTKIP=1
-HT_EXTCHA=1
-HT_GI=1
-HT_HTC=1
-HT_LDPC=1
-HT_LinkAdapt=0
-HT_MCS=33
-HT_MpduDensity=5
-HT_OpMode=0
-HT_PROTECT=1
-HT_RDG=0
-HT_RxStream=4
-HT_STBC=1
-HT_TxStream=4
-IcapMode=0
-idle_timeout_interval=0
-IEEE80211H=1
-IEEE8021X=0
-IgmpSnEnable=0
-ITxBfEn=1
-Key1Str=
-Key1Str1=
-Key1Str10=
-Key1Str11=
-Key1Str12=
-Key1Str13=
-Key1Str14=
-Key1Str15=
-Key1Str16=
-Key1Str2=
-Key1Str3=
-Key1Str4=
-Key1Str5=
-Key1Str6=
-Key1Str7=
-Key1Str8=
-Key1Str9=
-Key1Type=0
-Key2Str=
-Key2Str1=
-Key2Str10=
-Key2Str11=
-Key2Str12=
-Key2Str13=
-Key2Str14=
-Key2Str15=
-Key2Str16=
-Key2Str2=
-Key2Str3=
-Key2Str4=
-Key2Str5=
-Key2Str6=
-Key2Str7=
-Key2Str8=
-Key2Str9=
-Key2Type=0
-Key3Str=
-Key3Str1=
-Key3Str10=
-Key3Str11=
-Key3Str12=
-Key3Str13=
-Key3Str14=
-Key3Str15=
-Key3Str16=
-Key3Str2=
-Key3Str3=
-Key3Str4=
-Key3Str5=
-Key3Str6=
-Key3Str7=
-Key3Str8=
-Key3Str9=
-Key3Type=0
-Key4Str=
-Key4Str1=
-Key4Str10=
-Key4Str11=
-Key4Str12=
-Key4Str13=
-Key4Str14=
-Key4Str15=
-Key4Str16=
-Key4Str2=
-Key4Str3=
-Key4Str4=
-Key4Str5=
-Key4Str6=
-Key4Str7=
-Key4Str8=
-Key4Str9=
-Key4Type=0
-LinkTestSupport=0
-MACRepeaterEn=
-MACRepeaterOuiMode=2
-MeshAuthMode=
-MeshAutoLink=0
-MeshDefaultkey=0
-MeshEncrypType=
-MeshId=
-MeshWEPKEY=
-MeshWPAKEY=
-MUTxRxEnable=0
-NoForwarding=0
-NoForwardingBTNBSSID=0
-own_ip_addr=10.10.10.254
-
-PcieAspm=0
-PERCENTAGEenable=0
-PhyRateLimit=0
-PMFMFPC=1
-PMFMFPR=0
-PMFSHA256=0
-PMKCachePeriod=10
-PowerUpCckOfdm=0:0:0:0:0:0:0
-PowerUpHT20=0:0:0:0:0:0:0
-PowerUpHT40=0:0:0:0:0:0:0
-PowerUpVHT160=0:0:0:0:0:0:0
-PowerUpVHT20=0:0:0:0:0:0:0
-PowerUpVHT40=0:0:0:0:0:0:0
-PowerUpVHT80=0:0:0:0:0:0:0
-PreAntSwitch=
-PreAuth=0
-PreAuthifname=br0
-RadioLinkSelection=0
-RadioOn=1
-RADIUS_Acct_Key=
-RADIUS_Acct_Port=1813
-RADIUS_Acct_Server=
-RADIUS_Key1=
-RADIUS_Key10=
-RADIUS_Key11=
-RADIUS_Key12=
-RADIUS_Key13=
-RADIUS_Key14=
-RADIUS_Key15=
-RADIUS_Key16=
-RADIUS_Key2=
-RADIUS_Key3=
-RADIUS_Key4=
-RADIUS_Key5=
-RADIUS_Key6=
-RADIUS_Key7=
-RADIUS_Key8=
-RADIUS_Key9=
-RADIUS_Port=1812
-RADIUS_Server=0
-RDRegion=
-RED_Enable=1
-RekeyInterval=3600
-RekeyMethod=DISABLE
-RRMEnable=0
-RTSThreshold=2347
-session_timeout_interval=0
-ShortSlot=1
-SKUenable=0
-SSID=
-SSID1=MTK_AP2
-SSID10=
-SSID11=
-SSID12=
-SSID13=
-SSID14=
-SSID15=
-SSID16=
-SSID2=
-SSID3=
-SSID4=
-SSID5=
-SSID6=
-SSID7=
-SSID8=
-SSID9=
-StationKeepAlive=0
-StreamMode=0
-StreamModeMac0=
-StreamModeMac1=
-StreamModeMac2=
-StreamModeMac3=
-TGnWifiTest=0
-ThermalRecal=0
-TxBurst=1
-TxPower=100
-TxPreamble=1
-VHT_BW=1
-VHT_BW_SIGNAL=0
-VHT_LDPC=1
-VHT_Sec80_Channel=0
-VHT_SGI=1
-VHT_STBC=1
-VLANID=0
-VLANPriority=0
-VLANTag=0
-VOW_Airtime_Ctrl_En=
-VOW_Airtime_Fairness_En=1
-VOW_BW_Ctrl=0
-VOW_Group_Backlog=
-VOW_Group_DWRR_Max_Wait_Time=
-VOW_Group_DWRR_Quantum=
-VOW_Group_Max_Airtime_Bucket_Size=
-VOW_Group_Max_Rate=
-VOW_Group_Max_Rate_Bucket_Size=
-VOW_Group_Max_Ratio=
-VOW_Group_Max_Wait_Time=
-VOW_Group_Min_Airtime_Bucket_Size=
-VOW_Group_Min_Rate=
-VOW_Group_Min_Rate_Bucket_Size=
-VOW_Group_Min_Ratio=
-VOW_Rate_Ctrl_En=
-VOW_Refill_Period=
-VOW_RX_En=1
-VOW_Sta_BE_DWRR_Quantum=
-VOW_Sta_BK_DWRR_Quantum=
-VOW_Sta_DWRR_Max_Wait_Time=
-VOW_Sta_VI_DWRR_Quantum=
-VOW_Sta_VO_DWRR_Quantum=
-VOW_WATF_Enable=
-VOW_WATF_MAC_LV0=
-VOW_WATF_MAC_LV1=
-VOW_WATF_MAC_LV2=
-VOW_WATF_MAC_LV3=
-VOW_WATF_Q_LV0=
-VOW_WATF_Q_LV1=
-VOW_WATF_Q_LV2=
-VOW_WATF_Q_LV3=
-VOW_WMM_Search_Rule_Band0=
-VOW_WMM_Search_Rule_Band1=
-WapiAsCertPath=
-WapiAsIpAddr=
-WapiAsPort=
-Wapiifname=
-WapiPsk1=
-WapiPsk10=
-WapiPsk11=
-WapiPsk12=
-WapiPsk13=
-WapiPsk14=
-WapiPsk15=
-WapiPsk16=
-WapiPsk2=
-WapiPsk3=
-WapiPsk4=
-WapiPsk5=
-WapiPsk6=
-WapiPsk7=
-WapiPsk8=
-WapiPsk9=
-WapiPskType=
-WapiUserCertPath=
-WCNTest=0
-Wds0Key=
-Wds1Key=
-Wds2Key=
-Wds3Key=
-WdsEnable=0
-WdsEncrypType=NONE
-WdsList=
-WdsPhyMode=0
-WHNAT=1
-WiFiTest=0
-WirelessMode=14
-WmmCapable=1
-WPAPSK=
-WPAPSK1=12345678
-WPAPSK10=
-WPAPSK11=
-WPAPSK12=
-WPAPSK13=
-WPAPSK14=
-WPAPSK15=
-WPAPSK16=
-WPAPSK2=
-WPAPSK3=
-WPAPSK4=
-WPAPSK5=
-WPAPSK6=
-WPAPSK7=
-WPAPSK8=
-WPAPSK9=
-WscConfMode=0
-WscConfStatus=2

mt7615/files/l1profile.dat

@@ -1,27 +0,0 @@
-Default
-INDEX0=MT7603
-INDEX0_profile_path=/etc/Wireless/RT2860/RT2860.dat
-INDEX0_EEPROM_offset=0x0
-INDEX0_EEPROM_size=0x4000
-INDEX0_EEPROM_name=e2p
-INDEX0_main_ifname=ra0
-INDEX0_ext_ifname=ra
-INDEX0_wds_ifname=wds
-INDEX0_apcli_ifname=apcli
-INDEX0_mesh_ifname=mesh
-INDEX0_nvram_zone=dev1
-INDEX0_single_sku_path=/etc_ro/Wireless/RT2860AP/SingleSKU.dat
-INDEX0_bf_sku_path=/etc_ro/Wireless/RT2860AP/SingleSKU_BF.dat
-INDEX1=MT7615
-INDEX1_profile_path=/etc/Wireless/iNIC/iNIC_ap.dat
-INDEX1_EEPROM_offset=0x4000
-INDEX1_EEPROM_size=0x4000
-INDEX1_EEPROM_name=e2p
-INDEX1_main_ifname=rai0
-INDEX1_ext_ifname=rai
-INDEX1_wds_ifname=wdsi
-INDEX1_apcli_ifname=apclii
-INDEX1_mesh_ifname=meshi
-INDEX1_nvram_zone=dev2
-INDEX1_single_sku_path=/etc_ro/Wireless/RT2860AP/SingleSKU.dat
-INDEX1_bf_sku_path=/etc_ro/Wireless/RT2860AP/SingleSKU_BF.dat

mt7615/globalconfig.in

@@ -1,250 +0,0 @@
-# Kconfig for mtk wifi
-
-config MTK_WIFI_DRIVER
-	bool
-	default y
-	depends on (PACKAGE_kmod-mt7615e || PACKAGE_kmod-mt7603e)
-	select MTK_SUPPORT_OPENWRT
-	select MTK_MT_WIFI
-	select MTK_WIFI_BASIC_FUNC
-
-if MTK_WIFI_DRIVER
-
-menu "First WiFi card"
-choice
-	prompt "Choose First WiFi card"
-	default MTK_FIRST_IF_MT7603E
-
-	config MTK_FIRST_IF_NONE
-	bool "None"
-
-	config MTK_FIRST_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_FIRST_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-
-endchoice
-
-config  MTK_RT_FIRST_CARD
-        int
-        depends on ! MTK_FIRST_IF_NONE
-        default 7603 if MTK_FIRST_IF_MT7603E
-	default 7615 if MTK_FIRST_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_FIRST_CARD
-	string "WiFi driver build directory name"
-	default "rlt_wifi"
-
-config  MTK_RT_FIRST_IF_RF_OFFSET
-        hex "RF offset of 1st card"
-        depends on ! MTK_FIRST_IF_NONE
-        default 0x0
-
-#prompt "WiFi detailed options for 1st card"
-
-choice
-	prompt "EEPROM Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_EEPROM_EFUSE
-
-	config MTK_FIRST_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_FIRST_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_FIRST_IF_EEPROM_EFUSE
-	bool "EFUSE"
-
-endchoice
-
-config MTK_RT_FIRST_CARD_EEPROM
-	string
-	depends on ! MTK_FIRST_IF_NONE
-	default "prom" if MTK_FIRST_IF_EEPROM_PROM
-	default "efuse" if MTK_FIRST_IF_EEPROM_EFUSE
-	default "flash" if MTK_FIRST_IF_EEPROM_FLASH
-
-choice
-	prompt "PA/LNA Type of 1st Card"
-	depends on ! MTK_FIRST_IF_NONE
-	default MTK_FIRST_IF_IPAILNA
-
-	config MTK_FIRST_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_FIRST_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_FIRST_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-menu "Operation Modes for 1st card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-	#select MTK_MT_STA_SUPPORT
-endchoice
-
-source "ap.config.in"
-
-endmenu
-endmenu
-### endmenu for 1st wifi card #######
-
-#### menu starts for 2nd wifi card ###
-menu "Second WiFi card"
-
-choice
-	prompt "Choose Second WiFi card"
-	default MTK_SECOND_IF_MT7615E
-
-	config MTK_SECOND_IF_NONE
-	bool "None"
-
-	config MTK_SECOND_IF_MT7603E
-	bool "MT7603E"
-	select RALINK_MT7603E
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7603E
-
-	config MTK_SECOND_IF_MT7615E
-	bool "MT7615E"
-	select MTK_WIFI_MT_MAC
-	select MTK_MT_MAC
-	select MTK_CHIP_MT7615E
-endchoice
-
-config  MTK_RT_SECOND_CARD
-        int
-        depends on ! MTK_SECOND_IF_NONE
-        default 7603 if MTK_SECOND_IF_MT7603E
-	default 7615 if MTK_SECOND_IF_MT7615E
-
-config MTK_MT_WIFI_PATH_SECOND_CARD
-	string "WiFi driver build directory name"
-	default "mt_wifi"
-
-config  MTK_RT_SECOND_IF_RF_OFFSET
-        hex "RF offset of 2nd card"
-        depends on ! MTK_SECOND_IF_NONE
-        default 0x8000
-
-#prompt "WiFi detailed options for 2nd card"
-
-choice
-	prompt "EEPROM Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_EEPROM_EFUSE
-
-	config MTK_SECOND_IF_EEPROM_FLASH
-	bool "FLASH"
-
-	config MTK_SECOND_IF_EEPROM_PROM
-	bool "EEPROM"
-
-	config MTK_SECOND_IF_EEPROM_EFUSE
-	bool "EFUSE"
-endchoice
-
-config MTK_RT_SECOND_CARD_EEPROM
-	string
-	depends on ! MTK_SECOND_IF_NONE
-	default "prom" if MTK_SECOND_IF_EEPROM_PROM
-	default "efuse" if MTK_SECOND_IF_EEPROM_EFUSE
-	default "flash" if MTK_SECOND_IF_EEPROM_FLASH
-
-
-choice
-        prompt "PA/LNA Type of 2nd Card"
-	depends on ! MTK_SECOND_IF_NONE
-	default MTK_SECOND_IF_IPAILNA
-
-	config MTK_SECOND_IF_EPAELNA
-	bool "ePAeLNA"
-	config MTK_SECOND_IF_IPAILNA
-	bool "iPAiLNA"
-	config MTK_SECOND_IF_IPAELNA
-	bool "iPAeLNA"
-endchoice
-
-
-menu "Operation Modes for 2nd card"
-choice
-	prompt "Operating mode"
-	default MTK_WIFI_MODE_AP
-
-	config MTK_WIFI_MODE_AP
-	bool "AP"
-
-	config MTK_WIFI_MODE_STA
-	bool "STA"
-
-	config MTK_WIFI_MODE_BOTH
-	bool "AP+STA"
-endchoice
-
-source "ap.config.in"
-
-endmenu
-
-endmenu
-### endmenu for 2nd wifi card #######
-
-
-#### placeholder for 3rd wifi card ###
-config MTK_THIRD_IF_NONE
-	bool
-	default y
-
-config  MTK_RT_THIRD_CARD
-        int
-	default 0
-
-config  MTK_RT_THIRD_IF_RF_OFFSET
-        hex
-	default 0x4000
-
-config MTK_RT_THIRD_CARD_EEPROM
-	string
-	default "efuse"
-### placehlder for 3rd wifi card #######
-
-
-config MTK_MULTI_INF_SUPPORT
-	bool
-	default y if !MTK_FIRST_IF_NONE && !MTK_SECOND_IF_NONE
-
-
-source "common.config.in"
-
-#if MTK_CHIP_MT7615E || MTK_CHIP_MT7622 || MTK_CHIP_MT7626 || MTK_CHIP_AXE || MTK_CHIP_MT7915
-#	config MTK_MT_MAC
-#		bool
-#		default y
-#		select MTK_RATE_ADAPTION
-#		select MTK_RATE_ADAPT_AGBS_SUPPORT
-#		select MTK_DOT11_N_SUPPORT
-#		select MTK_DOT11_VHT_AC
-#		select MTK_HDR_TRANS_TX_SUPPORT
-#		select MTK_HDR_TRANS_RX_SUPPORT
-#endif
-
-endif #MTK_WIFI_DRIVER#

multiwan/Makefile

@@ -11,8 +11,6 @@ PKG_NAME:=multiwan
 PKG_VERSION:=1.0.22
 PKG_RELEASE:=2
 
-PKG_LICENSE:=GPLv2
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/multiwan

natalie-dect-h/Makefile

@@ -16,8 +16,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=9e2236989ff58d0db897f938b6b07b535144e0e2
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=PROPRIETARY
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk
 include $(INCLUDE_DIR)/kernel.mk

natalie-dect/Makefile

@@ -1,5 +1,8 @@
 #
-# Copyright (C) 2019 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,7 +14,7 @@ PKG_SOURCE_VERSION:=378c404fba3efc8f1bcde54370a5370670fa1853
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=natalie-dect-open
 else
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -22,8 +25,6 @@ endif
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_PARALLEL:=1
 
-PKG_LICENSE:=PROPRIETARY
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk
 include $(INCLUDE_DIR)/kernel.mk

ndisc/Makefile

@@ -15,9 +15,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://www.remlab.net/files/ndisc6
 PKG_MD5SUM:=50cb4c19606cf6ff2b7388e71832f579
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
-
 PKG_INSTALL:=1
 
 include $(INCLUDE_DIR)/package.mk

ndt/Makefile

@@ -12,9 +12,6 @@ PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
 PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
 
-PKG_LICENSE:=NONSTANDARD_PERMISSIV
-PKG_LICENSE_FILES:=COPYRIGHT
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ndt

netmode/Makefile

@@ -1,10 +1,3 @@
-#
-# Copyright (C) 2019 iopsys
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmode
@@ -18,9 +11,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/netmode

obuspa/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=2.0.0
+PKG_VERSION:=1.0.0
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9c7921c8e39acfc31f563bd08220faba1012a834
+PKG_SOURCE_VERSION:=014d7ec63331b3b745e8af53a4be1b52693e2a6f
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 
@@ -16,10 +16,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_FIXUP:=autoreconf
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/obuspa
@@ -49,10 +45,8 @@ define Package/obuspa/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/obuspa
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
-	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,41 +1,14 @@
-# controller, mtp, connection makes a group and related to one another
-# ex: first controller will be mapped to first mtp and first connection
-# details, always defined in groups
-
-config obuspa
-	option cert '/etc/obuspa/rootCA.pem'
-	option interface 'wan'
-	option debug 'false'
-
 config controller
 	option endpointid 'self::usp-controller.com'
-	option enable 'true'
-	# Trust cerificate number
-	option AssignedRole 1
-	option PeriodicNotifInterval "86400"
-	option PeriodicNotifTime "0001-01-01T00:00:00Z"
-	option USPRetryMinimumWaitInterval "5"
-	option USPRetryIntervalMultiplier "2000"
-	option ControllerCode ""
-	option protocol 'STOMP'
 
 config mtp
 	option enable 'true'
 	option protocol 'STOMP'
-	option destination ''
+	option destination 'uspq'
 
 config connection
 	option host 'usp-controller.com'
 	option username 'username'
 	option password 'password'
-	option encryption 'true'
-	option enable 'true'
-	option port 61613
-	option virtualhost '/'
-	option EnableHeartbeats "true"
-	option OutgoingHeartbeat "30000"
-	option IncomingHeartbeat "300000"
-	option ServerRetryInitialInterval "60"
-	option ServerRetryIntervalMultiplier "2000"
-	option ServerRetryMaxInterval "30720"
+	option encryption 'false'
 

obuspa/files/etc/init.d/obuspa

@@ -4,211 +4,92 @@ START=99
 USE_PROCD=1
 
 PROG=/usr/sbin/obuspa
-l3device=""
-certificate=""
-PARAM_FILE="/tmp/obuspa_param_reset.txt"
-conn_num=1
-mtp_num=1
-stomp_num=1
+
+CTRL_PATH="Device.LocalAgent.Controller.1."
+MTP_PATH="Device.LocalAgent.MTP.1."
+CONN_PATH="Device.STOMP.Connection.1."
 
 log() {
 	echo "${@}"|logger -t obuspa -p debug
 }
 
 db_set() {
-	if [ -n "${1}" ]; then
-		echo "${1} \"${2}\"">>${PARAM_FILE}
-	else
-		echo >>${PARAM_FILE}
-	fi
-}
-
-validate_obuspa_section()
-{
-	uci_validate_section obuspa obuspa "${1}" \
-		'cert:string:"/etc/obuspa/rootCA.pem"' \
-		'interface:string:wan' \
-		'debug:bool:false'
+	log "DBSET param|${1}| value|${2}|"
+	${PROG} -c dbset ${1} ${2}
 }
 
 validate_controller_section()
 {
 	uci_validate_section obuspa controller "${1}" \
-		'endpointid:string:"self:usp-controller.com"' \
-		'enable:bool:true' \
-		'AssignedRole:uinteger:1' \
-		'PeriodicNotifInterval:uinteger:86400' \
-		'PeriodicNotifTime:string:"0001-01-01T00:00:00Z"' \
-		'USPRetryMinimumWaitInterval:uinteger:5' \
-		'USPRetryIntervalMultiplier:uinteger:2000' \
-		'ControllerCode:string' \
-		'protocol:or("STOMP","CoAP")' \
-		'CoAPHost:string' \
-		'CoAPPath:string' \
-		'CoAPPort:uinteger'
+		'endpointid:string:"self:usp-controller.com"'
 }
 
 validate_mtp_section()
 {
 	uci_validate_section obuspa mtp "${1}" \
 		'enable:bool:true' \
-		'protocol:or("STOMP","CoAP")' \
-		'destination:string' \
-		'CoAPPath:string' \
-		'CoAPPort:uinteger'
+		'protocol:string:"STOMP"' \
+		'destination:string:'
 }
 
 validate_connection_section()
 {
 	uci_validate_section obuspa connection "${1}" \
 		'host:string:"usp-controller.com"' \
-		'username:string:""' \
-		'password:string:""' \
-		'encryption:bool:true' \
-		'enable:bool:true' \
-		'port:uinteger:61613' \
-		'virtualhost:string:"/"' \
-		'EnableHeartbeats:bool:true' \
-		'OutgoingHeartbeat:uinteger:30000' \
-		'IncomingHeartbeat:uinteger:300000' \
-		'ServerRetryInitialInterval:uinteger:60' \
-		'ServerRetryIntervalMultiplier:uinteger:2000' \
-		'ServerRetryMaxInterval:uinteger:30720'
+		'username:string:username' \
+		'password:string:password' \
+		'encryption:bool:true'
 }
 
 configure_controller() {
-	local endpointid enable AssignedRole PeriodicNotifInterval PeriodicNotifTime USPRetryMinimumWaitInterval
-	local USPRetryIntervalMultiplier ControllerCode protocol CoAPHost CoAPPath CoAPPort
+	local endpointid
 
 	validate_controller_section "${1}" || {
 		log "Validation of section failed"
 		return 1;
 	}
-	db_set Device.LocalAgent.Controller.${conn_num}.EndpointID "${endpointid}"
-	db_set Device.LocalAgent.Controller.${conn_num}.Alias "cpe-${conn_num}"
-	db_set Device.LocalAgent.Controller.${conn_num}.Enable "true"
-	db_set Device.LocalAgent.Controller.${conn_num}.AssignedRole "Device.LocalAgent.ControllerTrust.Role.${AssignedRole}"
-	db_set Device.LocalAgent.Controller.${conn_num}.PeriodicNotifInterval "${PeriodicNotifInterval}"
-	db_set Device.LocalAgent.Controller.${conn_num}.PeriodicNotifTime "${PeriodicNotifTime}"
-	db_set Device.LocalAgent.Controller.${conn_num}.USPRetryMinimumWaitInterval "${USPRetryMinimumWaitInterval}"
-	db_set Device.LocalAgent.Controller.${conn_num}.USPRetryIntervalMultiplier "${USPRetryIntervalMultiplier}"
-	db_set Device.LocalAgent.Controller.${conn_num}.ControllerCode "${ControllerCode}"
-	db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.Alias "cpe-${conn_num}" 
-	db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.Enable "${enable}"
-	db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.Protocol "${protocol}"
-	if [ "${protocol}"=="STOMP" ]; then
-		db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.STOMP.Reference "Device.STOMP.Connection.${conn_num}"
-		db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.STOMP.Destination "controller-notify-dest"
-	elif [ "${protocol}"=="CoAP" ]; then
-		db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.CoAP.Host "${CoAPHost}"
-		db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.CoAP.Path "${CoAPPath}"
-		db_set Device.LocalAgent.Controller.${conn_num}.MTP.${conn_num}.CoAP.Port "${CoAPPort}"
-	else
-		log "Unsupported protocol ${protocol}"
-	fi
-	db_set
-	conn_num=$((conn_num+1))
+	db_set "${CTRL_PATH}EndpointID" ${endpointid}
 }
 
 configure_mtp() {
-	local protocol enable destination CoAPPath CoAPPort
+	local protocol enable destination
 
 	validate_mtp_section "${1}" || {
 		log "Validation of section failed"
 		return 1;
 	}
-	db_set Device.LocalAgent.MTP.${mtp_num}.Alias "cpe-${mtp_num}"
-	db_set Device.LocalAgent.MTP.${mtp_num}.Enable "${enable}"
-	db_set Device.LocalAgent.MTP.${mtp_num}.Protocol "${protocol}"
-	if [ "${protocol}"=="STOMP" ]; then
-		db_set Device.LocalAgent.MTP.${mtp_num}.STOMP.Reference "Device.STOMP.Connection.${mtp_num}"
-		db_set Device.LocalAgent.MTP.${mtp_num}.STOMP.Destination "${destination}"
-	elif [ "${protocol}"=="CoAP" ]; then
-		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Path "${CoAPPath}"
-		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Port "${CoAPPort}"
-	else
-		log "Unsupported protocol ${protocol}"
-	fi
-	db_set
-	mtp_num=$((mtp_num+1))
+	db_set "${MTP_PATH}Enable" ${enable}
+	db_set "${MTP_PATH}Protocol" ${protocol}
+	db_set "${MTP_PATH}STOMP.Destination" ${destination}
 }
 
 configure_connection() {
-	local host username password encryption enable port virtualhost EnableHeartbeats
-	local OutgoingHeartbeat IncomingHeartbeat ServerRetryInitialInterval
-	local ServerRetryIntervalMultiplier ServerRetryMaxInterval
+	local host username password encryption
 
 	validate_connection_section "${1}" || {
 		log "Validation of section failed"
 		return 1;
 	}
-
-	db_set Device.STOMP.Connection.${stomp_num}.Host "${host}"
-	db_set Device.STOMP.Connection.${stomp_num}.Username "${username}"
-	db_set Device.STOMP.Connection.${stomp_num}.Password "${password}"
-
-	db_set Device.STOMP.Connection.${stomp_num}.Alias "cpe-${stomp_num}"
-	db_set Device.STOMP.Connection.${stomp_num}.Enable "${enable}"
-	db_set Device.STOMP.Connection.${stomp_num}.Port "${port}"
-	db_set Device.STOMP.Connection.${stomp_num}.X_ARRIS-COM_EnableEncryption "${encryption}"
-	db_set Device.STOMP.Connection.${stomp_num}.VirtualHost "${virtualhost}"
-	db_set Device.STOMP.Connection.${stomp_num}.EnableHeartbeats "${EnableHeartbeats}"
-	db_set Device.STOMP.Connection.${stomp_num}.OutgoingHeartbeat "${OutgoingHeartbeat}"
-	db_set Device.STOMP.Connection.${stomp_num}.IncomingHeartbeat "${IncomingHeartbeat}"
-	db_set Device.STOMP.Connection.${stomp_num}.ServerRetryInitialInterval "${ServerRetryInitialInterval}"
-	db_set Device.STOMP.Connection.${stomp_num}.ServerRetryIntervalMultiplier "${ServerRetryIntervalMultiplier}"
-	db_set Device.STOMP.Connection.${stomp_num}.ServerRetryMaxInterval "${ServerRetryMaxInterval}"
-	db_set
-	stomp_num=$((stomp_num+1))
+	db_set "${CONN_PATH}Host" ${host}
+	db_set "${CONN_PATH}Username" ${username}
+	db_set "${CONN_PATH}Password" ${password}
+	db_set "${CONN_PATH}X_ARRIS-COM_EnableEncryption" ${encryption}
 }
 
-configure_obuspa() {
-	local cert interface debug
-
-	validate_obuspa_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	if [ ${debug} -eq 1 ]; then
-		# Forward stdout of the command to logd
-		procd_set_param stdout 1
-		# Same for stderr
-		procd_set_param stderr 1
-	fi
-
-	# Get wan L3 interface
-	json_load "$(ubus -t 2 call network.interface.${interface} status)"
-	json_get_var l3device l3_device
-	export USP_BOARD_IFNAME=${l3device}
-
-	# Set this variable for root user
-	echo "export USP_BOARD_IFNAME=${l3device}">/root/.profile
-
-	[ -f $cert ] && certificate=$cert
-
-}
 db_init() {
-	[ -f ${PARAM_FILE} ] && rm -f ${PARAM_FILE}
 	[ -f /tmp/usp.db ] && rm -f /tmp/usp.db
 
 	config_load obuspa
-	config_foreach configure_obuspa obuspa
 	config_foreach configure_controller controller
-	config_foreach configure_connection connection
 	config_foreach configure_mtp mtp
-	db_set Internal.Reboot.Cause "LocalFactoryReset"
+	config_foreach configure_connection connection
 }
-
 start_service() {
-	procd_open_instance obuspa
 	db_init
-	procd_set_param env USP_BOARD_IFNAME=${l3device}
+
+	procd_open_instance
 	procd_set_param command ${PROG}
-	procd_append_param command -p -v 4 -r ${PARAM_FILE}
-	if [ -f "${certificate}" ]; then
-		procd_append_param command -t ${certificate}
-	fi
+	procd_append_param command -p -v 4
 	procd_set_param respawn
 	procd_close_instance
 }
@@ -221,3 +102,4 @@ reload_service() {
 service_triggers() {
 	procd_add_config_trigger "config.change" "obuspa"  /etc/init.d/obuspa restart
 }
+

owsd/Makefile

@@ -10,16 +10,13 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=a83448ed65e1c76411b9c6553d64b5d623b8bcd7
+PKG_SOURCE_VERSION:=f1d6bff1971640006b3137b342fafa1c40cfb835
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS CONFIG_OWSD_UPROXYD
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 USE_UBUS-y:=-DWSD_HAVE_UBUS=ON
 USE_DBUS-y:=-DWSD_HAVE_DBUS=ON
 USE_BOTH-y:=${USE_UBUS-y} ${USE_DBUS-y}

owsd/files/owsd.init

@@ -66,8 +66,6 @@ rpcd_acl() {
 }
 
 handle_owsd_acl() {
-	[ -d /tmp/owsd ] || mkdir /tmp/owsd
-
 	config_load rpcd
 	config_foreach append_users "login"
 
@@ -79,9 +77,9 @@ handle_owsd_acl() {
 		config_foreach owsd_acl "owsd-listen" "$USR"
 		json_close_array
 	done
-	json_dump > /tmp/owsd/owsd_acl
+	json_dump > /tmp/owsd_acl
 
-	json_load "$(cat /tmp/owsd/owsd_acl)"
+	json_load "$(cat /tmp/owsd_acl)"
 	config_load rpcd
 	config_foreach rpcd_acl "login"
 	uci commit rpcd
@@ -128,8 +126,8 @@ validate_owsd_global() {
 
 }
 
-append_str() {
-	json_add_string "" "$1"
+append_origin() {
+	procd_append_param command -o"$1"
 }
 
 append_origin_parts() {
@@ -139,9 +137,9 @@ append_origin_parts() {
 	port="$3"
 
 	if [ "${proto}" = "https" -a "${port}" -eq 443 -o "${proto}" = "http" -a "${port}" -eq 80 ]; then
-		append_str "${proto}://${host}"
+		append_origin "${proto}://${host}"
 	else
-		append_str "${proto}://${host}:${port}"
+		append_origin "${proto}://${host}:${port}"
 	fi
 }
 
@@ -152,7 +150,6 @@ validate_owsd_iface() {
 		'origin:list(string)' \
 		'whitelist_interface_as_origin:bool:0' \
 		'whitelist_dhcp_domains:bool:0' \
-		'whitelist_all_origins:bool:0' \
 		'ipv6:bool:1' \
 		'ipv6only:bool:0' \
 		'linklocal:bool:0' \
@@ -166,7 +163,7 @@ validate_owsd_iface() {
 }
 
 parse_owsd_iface() {
-	local port interface whitelist_interface_as_origin whitelist_dhcp_domains whitelist_all_origins ipv6 ipv6only linklocal
+	local port interface whitelist_interface_as_origin whitelist_dhcp_domains ipv6 ipv6only linklocal
 	local cert key ca
 	local restrict_to_user
 	local ubusx_acl
@@ -178,37 +175,24 @@ parse_owsd_iface() {
 
 	# utility function
 	new_listen_socket() {
-		json_add_int "port" ${port}
+		procd_append_param command -p "${port}"
 
-		[ -n "${cert}"      ] && json_add_string "cert" "${cert}"
-		[ -n "${key}"       ] && json_add_string "key" "${key}"
-		[ -n "${ca}"        ] && json_add_string "ca" "${ca}"
+		procd_append_param command -L"$1"
 
-		[ -n "${restrict_to_user}" ] && {
-			json_add_array "restrict_to_user"
-			config_list_foreach "$1" "restrict_to_user" append_str
-			json_close_array
-		}
-		[ -n "$2" ] && json_add_string "interface" "$2"
+		[ -n "${cert}"      ] && procd_append_param command -c"${cert}"
+		[ -n "${key}"       ] && procd_append_param command -k"${key}"
+		[ -n "${ca}"        ] && procd_append_param command -a"${ca}"
 
-		[ -n "${ubusx_acl}" ] && json_add_string "ubusx_acl" "$ubusx_acl"
+		[ -n "${restrict_to_user}" ] && procd_append_param command -u"${restrict_to_user}"
+
+		[ -n "$2" ] && procd_append_param command -i"$2"
+
+		[ -n "${ubusx_acl}" ] && procd_append_param command -X"${ubusx_acl}"
 
 	}
 
-	origin_whitelist_all() {
-		[ "$1" = "*" ] && echo "true"
-	}
-
-	append_whitelists() {
-		config_list_foreach "$1" "origin" append_str
-
-		# uncomment code below when implementing one vhost per origin fix
-		#[ -n "$2" ] && whitelist_all_origins=1
-
-		#if [ "$whitelist_all_origins" -eq 1 ]; then
-		#	whitelist_dhcp_domains=1
-		#	whitelist_interface_as_origin=1
-		#fi
+	append_whitelists () {
+		config_list_foreach "$1" "origin" append_origin
 
 		if [ "$whitelist_dhcp_domains" -eq 1 ]; then
 			for domain in $DHCP_DOMAINS; do
@@ -228,22 +212,13 @@ parse_owsd_iface() {
 	if [ -n "${interface}" ]; then
 		# 1 listen-socket (vhost) for each IP address on that network's iface
 
-		whitelist=$(config_list_foreach "$1" "origin" origin_whitelist_all)
-
 		# ipv4 addresses
 		if [ "${ipv6only}" -eq 0 ]; then
 			network_get_ipaddrs ip4addrs "${interface}";
 		fi
-
-		json_add_array "$1"
 		for addr in ${ip4addrs}; do
-			json_add_object "${1}"
 			new_listen_socket "$1" "${addr}"
-			[ -n "$whitelist" -o "$whitelist_all_origins" -eq 1 ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_close_object
+			append_whitelists "$1"
 		done
 
 		# ipv6 addresses
@@ -255,24 +230,16 @@ parse_owsd_iface() {
 				ip6addrs="${ip6addrs} ${linklocaladdrs}"
 			fi
 		fi
-
 		for addr in ${ip6addrs}; do
-			json_add_object "${1}6"
 			new_listen_socket "$1" "${addr}"
 			addr="\\[${addr}]"
-			[ -n "$whitelist" ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_add_boolean "ipv6" 1
-			json_close_object
+			append_whitelists "$1"
+			procd_append_param command -66
 		done
-		json_close_array
-
 	else
 		new_listen_socket "$1"
-		if [ "${ipv6}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
-		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
+		if [ "${ipv6}" -eq 1 ]; then procd_append_param command -6; fi
+		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then procd_append_param command -6; fi
 
 		append_whitelists "$1"
 	fi
@@ -296,49 +263,41 @@ start_service() {
 		echo "Global validation failed"
 		return 1
 	}
-	json_init
-	json_add_object "global"
-	[ -n "${sock}"       ] && json_add_string "socket" "$sock"
-	[ -n "${www}"        ] && json_add_string "www" "$www"
-	[ -n "${redirect}"   ] && json_add_string "redirect" "$redirect"
-	[ -n "${www_maxage}" ] && json_add_int "www_maxage" "$www_maxage"
-	json_close_object
+
+	[ -n "${sock}"      ] && procd_append_param command -s"${sock}"
+	[ -n "${www}"       ] && procd_append_param command -w"${www}"
+	[ -n "${redirect}"  ] && procd_append_param command -r"${redirect}"
+	[ -n "${www_maxage}" ] && procd_append_param command -t"${www_maxage}"
+
+	#validate_owsd_ubusproxy || {
+	#	echo "Ubusproxy validation failed"
+	#	return 1
+	#}
 
 	validate_owsd_ubusproxy && {
 		if [ "${enable}" -eq 1 ]; then
-			json_add_object "ubusproxy"
+			procd_append_param command -U
 
-			[ -n "${peer_cert}" ] && json_add_string "peer_cert" "${peer_cert}"
-			[ -n "${peer_key}"  ] && json_add_string "peer_key" "${peer_key}"
-			[ -n "${peer_ca}"   ] && json_add_string "peer_ca" "${peer_ca}"
+			[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
+			[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
+			[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
 
 			append_peer () {
-				[ -n "$1"   ] && json_add_string "peer" "$1"
+				[ -n "$1"   ] && procd_append_param command -P"$1"
 			}
 
 			append_object () {
-				[ -n "$1"   ] && json_add_string "object" "$1"
+				[ -n "$1"   ] && procd_append_param command -U"$1"
 			}
 
-			json_add_array "peer"
 			config_list_foreach "ubusproxy" "peer" append_peer
-			json_close_array
-			json_add_array "object"
 			config_list_foreach "ubusproxy" "object" append_object
-			json_close_array
 
-			[ "${prefix}" == "mac" ] && json_add_string "prefix" "mac"
-			json_close_object
+			[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
 		fi
 	}
 
-	json_add_object "owsd-listen"
 	config_foreach parse_owsd_iface "owsd-listen"
-	json_close_object
-
-	[ ! -d "/tmp/owsd" ] && mkdir /tmp/owsd
-	json_dump > /tmp/owsd/owsd_cfg.json
-	procd_append_param command -f "/tmp/owsd/owsd_cfg.json"
 
 #	procd_set_param stderr 1
 	procd_set_param respawn

paho-mqtt-c/Makefile

@@ -16,10 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=edl-v10
-PKG_LICENSE_FILES:=LICENSE
-
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/lib-paho-mqtt

peripheral_manager/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2019 iopsys
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=ba1026896e221cb60751fe2faab002d241f9db74
+PKG_SOURCE_VERSION:=769430115b6dd984313574c3fa2a6d99c65cd223
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 PKG_BUILD_PARALLEL:=1
 
@@ -39,7 +36,7 @@ define Package/peripheral_manager
 	CATEGORY:=Utilities
 	TITLE:=Application deamon for handling of peripheral
 	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json @+PACKAGE_bcmkernel:bcmkernel @+PACKAGE_bcmopen:bcmopen
+	DEPENDS:=+libuci +libubus +libblobmsg-json +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
 endef
 
 define Package/peripheral_manager/description

peripheral_manager/files/etc/init.d/peripheral_manager

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 
-START=12
+START=19
 STOP=91
 
 USE_PROCD=1

picolisp/Makefile

@@ -0,0 +1,83 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=picolisp
+PKG_VERSION=3.1.10
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR := $(BUILD_DIR)/picoLisp
+PKG_SOURCE:=picoLisp-$(PKG_VERSION).tgz
+PKG_SOURCE_URL:=http://software-lab.de/
+PKG_MD5SUM:=ac19fd6ff4d05dd2b15ea00d1ed591e7
+
+PKG_BUILD_DEPENDS+= +libopenssl +@OPENSSL_WITH_EC2M
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/picolisp
+SECTION:=lang
+CATEGORY:=Languages
+TITLE:=PicoLisp interpreter
+DEPENDS:= +libopenssl +@OPENSSL_WITH_EC2M
+URL:=http://www.picolisp.org/
+MAINTAINER:=Jeronimo Pellegrini <j_p@aleph0.info>
+endef
+
+define Package/picolisp/description
+  Picolisp is yet another dialect of the Lisp language, specially written to be radically practical and simple.
+endef
+
+TARGET_LDFLAGS += -L$(STAGING_DIR)/usr/lib
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include
+
+# A hack to make picoLisp's Makefile see the include path:
+MAKE_FLAGS += C_INCLUDE_PATH+=$(STAGING_DIR)/usr/include/ 
+
+define Package/picolisp/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/usr/lib/picolisp/
+	$(INSTALL_DIR) $(1)/usr/lib/picolisp/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/pil      $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/psh      $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/watchdog $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/picolisp $(1)/usr/bin/
+	$(CP) $(PKG_BUILD_DIR)/*.l        $(1)/usr/lib/picolisp/
+	$(CP) $(PKG_BUILD_DIR)/lib/ht \
+	   		$(PKG_BUILD_DIR)/lib/ext \
+	   		$(PKG_BUILD_DIR)/lib/adm.l \
+	   		$(PKG_BUILD_DIR)/lib/app.l \
+	   		$(PKG_BUILD_DIR)/lib/boss.l \
+	   		$(PKG_BUILD_DIR)/lib/btree.l \
+	   		$(PKG_BUILD_DIR)/lib/conDbgc.l \
+	   		$(PKG_BUILD_DIR)/lib/db.l \
+		   	$(PKG_BUILD_DIR)/lib/debug.l \
+	   		$(PKG_BUILD_DIR)/lib/edit.l \
+			$(PKG_BUILD_DIR)/lib/ed.l \
+			$(PKG_BUILD_DIR)/lib/form.l \
+	   		$(PKG_BUILD_DIR)/lib/frac.l \
+	   		$(PKG_BUILD_DIR)/lib/heartbeat.l \
+	   		$(PKG_BUILD_DIR)/lib/http.l \
+	   		$(PKG_BUILD_DIR)/lib/import.l \
+	   		$(PKG_BUILD_DIR)/lib/led.l \
+	   		$(PKG_BUILD_DIR)/lib/lint.l \
+	   		$(PKG_BUILD_DIR)/lib/math32.l \
+	   		$(PKG_BUILD_DIR)/lib/math64.l \
+	   		$(PKG_BUILD_DIR)/lib/math.l \
+	   		$(PKG_BUILD_DIR)/lib/misc.l \
+	   		$(PKG_BUILD_DIR)/lib/pilog.l \
+	   		$(PKG_BUILD_DIR)/lib/prof.l \
+	   		$(PKG_BUILD_DIR)/lib/ps.l \
+	   		$(PKG_BUILD_DIR)/lib/rsa.l \
+	   		$(PKG_BUILD_DIR)/lib/scrape.l \
+	   		$(PKG_BUILD_DIR)/lib/simul.l \
+			$(PKG_BUILD_DIR)/lib/sq.l \
+			$(PKG_BUILD_DIR)/lib/too.l \
+			$(PKG_BUILD_DIR)/lib/xhtml.l \
+	   		$(PKG_BUILD_DIR)/lib/xm.l \
+	   		$(PKG_BUILD_DIR)/lib/xml.l \
+	   		$(PKG_BUILD_DIR)/lib/xmlrpc.l	$(1)/usr/lib/picolisp/lib/
+	touch $(1)/usr/lib/picolisp/lib/tags
+	$(STRIP) $(1)/usr/bin/picolisp
+endef
+
+$(eval $(call BuildPackage,picolisp))

picolisp/patches/001-mips.diff

@@ -0,0 +1,43 @@
+diff -Nur picoLisp/Makefile picoLisp-new/Makefile
+--- picoLisp/Makefile	1969-12-31 21:00:00.000000000 -0300
++++ picoLisp-new/Makefile	2015-06-02 15:38:07.469726899 -0300
+@@ -0,0 +1,6 @@
++all:
++	(cd src; make)
++
++clean:
++	(cd src; make clean)
++
+diff -Nur picoLisp/src/Makefile picoLisp-new/src/Makefile
+--- picoLisp/src/Makefile	2015-03-31 15:48:22.000000000 -0300
++++ picoLisp-new/src/Makefile	2015-06-02 15:40:43.541491599 -0300
+@@ -6,9 +6,13 @@
+ 
+ picoFiles = main.c gc.c apply.c flow.c sym.c subr.c big.c io.c net.c tab.c
+ 
+-CC = gcc
++#CC = gcc
+ # CCLD is the cc (compiler frontend) to use for the link step.
+-CCLD = gcc
++#CCLD = gcc
++
++# Honor the $(CC) variable, inherited form the environment (it's essential
++# when cross-compiling)
++CCLD = $(CC)
+ 
+ CFLAGS = -c -O2 -pipe \
+ 	-falign-functions=32 -fomit-frame-pointer -fno-strict-aliasing \
+@@ -19,10 +23,10 @@
+ 
+ ifeq ($(shell uname), Linux)
+ 	OS = Linux
+-	CFLAGS += -m32
+-	PICOLISP-FLAGS = -m32 -rdynamic
++	CFLAGS += -mabi=32 -fPIC
++	PICOLISP-FLAGS = -rdynamic
+ 	LIB-FLAGS = -lm -ldl
+-	DYNAMIC-LIB-FLAGS = -m32 -shared -export-dynamic
++	DYNAMIC-LIB-FLAGS = -shared -export-dynamic -fPIC
+ 	LCRYPT = -lcrypt
+ 	STRIP = strip
+ else

port-management/Makefile

@@ -4,7 +4,7 @@ PKG_NAME:=port-management
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPL-2.0-only
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/port-management

port-management/files/etc/init.d/port_management

@@ -73,8 +73,3 @@ service_triggers() {
 	procd_add_reload_trigger ports
 }
 
-boot() {
-	wan=$(db -q get hw.board.ethernetWanPort)
-	restart_port $wan
-	start
-}

power-management/Makefile

@@ -3,7 +3,6 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=power-management
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPL-2.0-only
 
 include $(INCLUDE_DIR)/package.mk
 

questd/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=questd
 PKG_VERSION:=4.1.1
 
-PKG_SOURCE_VERSION:=04eb78c28d96801951b204bc434f84d43d4a0d03
+PKG_SOURCE_VERSION:=c1d8ba92f6a8538f7a48960592cfe91c0c057c2b
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -16,9 +16,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)