uci-diff: update

-------------------------------------------------------------------------------
* 07c8a16 Before dectmngr2 does a fast exit (in case of an error), try to send a failure response to any ubus quierier (or might block in a timeout).
* c5619c2 - Only shuttdown ubus receiver if the radio is configured for auto off and is about to become off soon. - Comments
* a4898c8 - Extend timeout error message to ubus querier due to deleting a handset may be very slow sometimes. - When shutting down ubus receiver, also send an error to any active querier (to avoid blocking timeouts). - Only enable ubus receiver once if needed.
-------------------------------------------------------------------------------
commit 07c8a1665dc1f767c8ae2da92e41f482956f8959
Author: Ronny Nilsson <ronny.nilsson@inteno.se>
Date: 2016-06-28 15:43:12 +0200

    Before dectmngr2 does a fast exit (in case of an error), try to send a
    failure response to any ubus quierier (or might block in a timeout).

Base directory -> /
 src/error.c | 5 +++++
 src/ubus.c  | 1 +
 2 files changed, 6 insertions(+)
-------------------------------------------------------------------------------
commit c5619c257a199eb331f41798a01d5d608ce149b5
Author: Ronny Nilsson <ronny.nilsson@inteno.se>
Date: 2016-06-28 13:35:02 +0200

    - Only shuttdown ubus receiver if the radio is configured for auto off and
    is about to become off soon. - Comments

Base directory -> /
 src/handset.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
-------------------------------------------------------------------------------
commit a4898c88a49b94bccb5c9a60cab3f6bdff94cffc
Author: Ronny Nilsson <ronny.nilsson@inteno.se>
Date: 2016-06-28 13:33:08 +0200

    - Extend timeout error message to ubus querier due to deleting a handset may
    be very slow sometimes. - When shutting down ubus receiver, also send an
    error to any active querier (to avoid blocking timeouts). - Only enable ubus
    receiver once if needed.

Base directory -> /
 src/ubus.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
-------------------------------------------------------------------------------

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
 
 sanitize() {
 	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
@@ -20,6 +20,7 @@ find_usb_attrs() {
 	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	interface=$(cat $usb_dir/interface)
 	if [ -n "$cdcdev" ]; then
 		comdev=$cdcdev
 		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
@@ -48,6 +49,8 @@ case "$usbbr" in
 	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
 esac
 
+#devno=$(basename $DEVPATH)
+
 find_usb_attrs
 if [ "$ACTION" = add ]; then
 	convert_to_mbim "$uVid:$uPid"
@@ -55,6 +58,9 @@ if [ "$ACTION" = add ]; then
 		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 			sed -i "/$usbno:$usbbr/ d" /var/usbnets
 			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+
 		fi
 	fi
 fi
@@ -62,5 +68,7 @@ fi
 if [ "$ACTION" = remove ]; then
 	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
 	fi
 fi

asterisk-1.8.x-mod/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1
 
-PKG_SOURCE_VERSION:=2a1dd4361a14220affb5c9a39d1feff645fd67c7
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
 
@@ -19,7 +19,7 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-include $(INCLUDE_DIR)/ltqtapi.mk
+-include $(INCLUDE_DIR)/ltqtapi.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/asterisk18-mod/Default
@@ -119,7 +119,7 @@ endef
 define Package/asterisk18-mod-cdr
 $(call Package/asterisk18-mod/Default)
   TITLE:=CDR support
-  DEPENDS:= asterisk18-mod
+  DEPENDS:= asterisk18-mod +libsqlite3
 endef
 
 define Package/asterisk18-mod-cdr/description
@@ -188,17 +188,6 @@ $(call Package/asterisk18-mod/Default/description)
  support to Asterisk.
 endef
 
-define Package/asterisk18-mod-chan-mobile
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Mobile channel support
-  DEPENDS:= asterisk18-mod +bluez-libs
-endef
-
-define Package/asterisk18-mod-chan-mobile/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_mobile support to Asterisk.
-endef
-
 define Package/asterisk18-mod-res-timing-timerfd
 $(call Package/asterisk18-mod/Default)
   TITLE:= Timerfd Timing Interface
@@ -341,14 +330,6 @@ else
     --without-spandsp
 endif
 
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
-  CONFIGURE_ARGS+= \
-	--with-bluetooth="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-bluetooth
-endif
-
 ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
   CONFIGURE_ARGS+= \
 	--with-srtp="$(STAGING_DIR)/usr"
@@ -392,6 +373,9 @@ CONFIGURE_ARGS+= \
 	--with-sounds-cache="$(DL_DIR)" \
 	--disable-xmldoc
 
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
 EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
 EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
 
@@ -568,17 +552,6 @@ define Package/asterisk18-mod-chan-gtalk/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
 endef
 
-define Package/asterisk18-mod-chan-mobile/conffiles
-/etc/asterisk/chan_mobile.conf
-endef
-
-define Package/asterisk18-mod-chan-mobile/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
-endef
-
 define Package/asterisk18-mod-res-timing-timerfd/install
 	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
@@ -730,7 +703,6 @@ $(eval $(call BuildPackage,asterisk18-mod-cdr))
 $(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
 $(eval $(call BuildPackage,asterisk18-mod-res-voice))
 $(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
-$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
 $(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))

bluez/Makefile

@@ -1,81 +0,0 @@
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bluez
-PKG_VERSION:=5.28
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
-PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
-
-PKG_FIXUP:=autoreconf
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-define Package/bluez
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
-  TITLE:=Bluetooth stack new version 
-  URL:=http://www.bluez.org/
-endef
-
-define Package/bluez/conffiles
-/etc/config/bluetooth
-endef
-
-TARGET_LDFLAGS+= \
-                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
-
-CONFIGURE_ARGS += \
-		--enable-shared \
-		--disable-cups \
-		--enable-debug \
-		--disable-test \
-		--disable-obex \
-		--disable-systemd \
-		--disable-udev \
-		--enable-tools \
-		--enable-experimental \
-		--enable-library \
-		--disable-static \
-
-define Build/Compile
-    $(MAKE) -C $(PKG_BUILD_DIR) \
-        LDFLAGS="$(TARGET_LDFLAGS) \
-            -L$(ICONV_PREFIX)/lib \
-            -L$(INTL_PREFIX)/lib -lm -lncurses" \
-        DESTDIR="$(PKG_INSTALL_DIR)" \
-        all install
-endef
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/bluetooth
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
-endef
-define Package/bluez/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
-
-	$(INSTALL_DIR) $(1)/etc/bluetooth
-	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
-	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
-
-	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,bluez))

btle_alarm/Makefile

@@ -1,47 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=btle_alarm
-PKG_VERSION:=1.0.6
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/btle_alarm
-  SECTION:=base
-  CATEGORY:=Utilities
-  TITLE:=Ethernet bridging configuration utility
-  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
-  URL:=http://btle_alarm.sourceforge.net/
-  DEPENDS:=+bluez +libncurses
-endef
-
-define Package/btle_alarm/description
- Ethernet bridging configuration utility
- Manage ethernet bridging; a way to connect networks together to
- form a larger network.
-endef
-
-define Package/btle_alarm/install
-
-	$(CP) ./files/* $(1)/
-
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
-
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
-
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
-
-endef
-
-$(eval $(call BuildPackage,btle_alarm))

btle_alarm/files/btle_alarm.conf

@@ -1,2 +0,0 @@
-config info 'Device'
-        option mac 'D0:39:72:B6:23:D6'

btle_alarm/files/etc/init.d/btle_alarm

@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-START=99
-
-start() {
-        for i in down reset up;do
-            hciconfig hci0 $i
-        done
-        mac=`uci get btle_alarm.Device.mac`
-        if [ $? -eq 0 ];then
-            hcitool lewladd $mac
-        else
-            hcitool lewladd D0:39:72:B6:43:8A
-            hcitool lewladd D0:39:72:B6:18:AA
-        fi
-       sleep 1
-        /sbin/btle_alarm &> /dev/null &
-        echo $! > /tmp/btle_alarm.pid
-}
-
-stop() {
-        hciconfig hci0 down
-        kill -9 `cat /tmp/btle_alarm.pid`
-        rm /tmp/btle_alarm.pid
-        sleep 1
-}

dectmngr2/Makefile

@@ -11,14 +11,10 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=666c3e93ad56e20493bae8a439e9655ce947f2f7
+PKG_SOURCE_VERSION:=07c8a1665dc1f767c8ae2da92e41f482956f8959
 PKG_NAME:=dectmngr2
 
 
-LDFLAGS+= \
-        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
-
 RSTRIP:=true
 export BUILD_DIR
 
@@ -43,12 +39,15 @@ endef
 define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN)  $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

endptcfg/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptcfg/Makefile

@@ -56,6 +56,10 @@ define Package/endptcfg/description
 	Broadcom endpoint driver configuration application
 endef
 
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
 ifneq ($(CONFIG_ENDPT_OPEN),y)
 define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR) \

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/Makefile

@@ -16,26 +16,25 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
 BASE_PKG_VERSION:=3.4.1
-PKG_RELEASE:=RC8
+PKG_RELEASE:=RC11
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
-PKG_SOURCE_VERSION:=ecad8b60183b43ecf86543c0c29db46cda8aae29
+PKG_SOURCE_VERSION:=184d29446fe6103f567c968bf35569625326a82c
 ifeq ($(CONFIG_ICE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
 #PKG_NAME:=ice-client-open
 else
-PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
-
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 endif
 
 
@@ -53,7 +52,11 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+endef
+
+define Package/ice-client/config
+	source "$(SOURCE)/Config.in"
 endef
 
 ###########################--DEVELOPMENT--################################
@@ -136,7 +139,7 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1} $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
@@ -162,8 +165,8 @@ cp /tmp/iopsysserver.ini /etc/iopsys/server.ini
 rm -f /tmp/iopsysserver.ini 
 cp /tmp/ice.back /etc/config/ice 
 rm -f /tmp/ice.back
-if [ -f "/etc/rc.d/S99ice-client" ]; then
-	/etc/init.d/ice-client start
+if [ -f "/etc/rc.d/S98ice-client" ]; then
+	/etc/init.d/ice-client restart
 fi
 exit 0
 endef
@@ -482,7 +485,7 @@ endef
 define Package/ice-client-fileme
   $(call Package/ice-client/Default)
   TITLE:=FileMe
-  DEPENDS+= +lighttpd +samba2-client
+  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
 endef
 
 define Package/ice-client-fileme/description
@@ -883,6 +886,55 @@ fi
 exit 0
 endef
 
+# texec
+define Package/ice-client-texec
+  $(call Package/ice-client/Default)
+  TITLE:=texec
+  DEPENDS+= 
+endef
+
+define Package/ice-client-texec/description
+remote script execution module for ice-client
+endef
+
+define Package/ice-client-texec/prerm
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=texec" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/preinst
+#!/bin/sh
+if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
+PROC_ID=$$(cat /tmp/ice.pid)
+PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
+if [ -n "$$PROC_EXISTS" ]; then
+  read -t 1 <>/tmp/cfout
+  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
+fi
+exit 0
+endef
+
+define Package/ice-client-texec/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
+endef
+
+define Package/ice-client-texec/postinst
+#!/bin/sh
+read -t 1 <>/tmp/cfout
+if [ -f /tmp/ice.pid  ]; then
+	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
+fi
+exit 0
+endef
+
 # bmspeedtest
 define Package/ice-client-bcmspeedmgr
   $(call Package/ice-client/Default)
@@ -897,10 +949,20 @@ endef
 define Package/ice-client-bcmspeedmgr/install
 	$(INSTALL_DIR) $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
+	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
 endef
+
+define Package/ice-client-bcmspeedmgr/postinst
+#!/bin/sh
+/etc/init.d/bcmspeedtestservice stop
+/etc/init.d/bcmspeedtestservice start
+exit 0
+endef
+
 endif
+
 # This line executes the necessary commands to compile our program.
 # The above define directives specify all the information needed, but this
 # line calls BuildPackage which in turn actually uses this information to
@@ -921,5 +983,6 @@ $(eval $(call BuildPackage,ice-client-rework))
 $(eval $(call BuildPackage,ice-client-sip))
 $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
+$(eval $(call BuildPackage,ice-client-texec))
 $(eval $(call BuildPackage,ice-client-bcmspeedmgr))
 endif

icgroupd/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2016 Inteno Broadband AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=icgroupd
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=
+
+PKG_MAINTAINER:=Inteno Broadband AB
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/icgroupd
+  SECTION:=base
+  CATEGORY:=Base system
+  TITLE:=Inteno cgroup daemon
+  DEPENDS:=+uci +busybox
+endef
+
+define Package/icgroupd/description
+	This package contains Intenos cgroup daemon and associated
+	configuration and startup scripts.
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/icgroupd/install
+	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
+
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,icgroupd))
+

icgroupd/files/cgroupd

@@ -0,0 +1,76 @@
+#!/bin/sh
+
+CGBASEDIR=$1
+CGCONFIG=$2
+[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
+
+[ -r /lib/functions.sh ] || exit 1
+. /lib/functions.sh
+
+CGPROCMAP=/tmp/cgprocmap
+CGPERIOD=3s
+
+DBGLOG=/tmp/cgroupd.log
+DEBUG=0
+
+
+add_to_procmap () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo "($name) $grp" >> $CGPROCMAP
+}
+
+# Read configuration file and create process:group look-up table
+# in /tmp file
+read_config () {
+	local enab
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && exit 1
+
+	config_get CGDEFGROUP cgroups defgroup "_undef_"
+	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
+	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
+
+	echo -n '' > $CGPROCMAP
+	config_list_foreach procmap procmap add_to_procmap
+	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
+}
+
+# Move all process except init from cgroup root to cgroups according
+# to /tmp look-up table
+move_wild_procs () {
+	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
+	local pid name grp
+
+	for pid in $wild_procs; do
+
+		[ $pid -eq 1 ] && continue
+		if [ -d /proc/$pid ]; then
+
+			name=$(awk '{print $2}' /proc/$pid/stat)
+			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
+
+			[ "$grp" == "." ] && continue
+			[ -n "$grp" ] || grp=$CGDEFGROUP
+
+			[ "$DEBUG" == "1" ] && \
+			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
+			echo $pid > $CGBASEDIR/$grp/cgroup.procs
+		fi
+	done
+}
+
+
+[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+read_config
+while true; do
+	move_wild_procs
+	sleep $CGPERIOD
+done

icgroupd/files/cgroups.config

@@ -0,0 +1,48 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+#	list option cpu.rt_runtime_us=50000
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=40000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=30000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=2500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=7500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap kthreadd=.
+	list procmap minidlna=3prt/normal
+

icgroupd/files/cgroups.init

@@ -0,0 +1,93 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+PROCD_DEBUG=1
+NAME=cgroupd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+DBGLOG=/tmp/cginit.log
+DEBUG=0
+
+
+cgroupinit_set_knob_value () {
+	local knob_val=$1
+	local dir=$2
+	local knob val
+
+	knob=$(echo $knob_val |awk -F= '{print $1}')
+	val=$(echo $knob_val |awk -F= '{print $2}')
+	/bin/echo $val > $CGBASEDIR/$dir/$knob
+	[ "$DEBUG" == "1" ] && \
+	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir
+
+	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+
+		if [ ! -d $CGBASEDIR/$dir ]; then
+			mkdir $CGBASEDIR/$dir
+			[ "$DEBUG" == "1" ] && \
+			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
+		fi
+	fi
+
+	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
+}
+
+cgroupinit_configure_cgroups () {
+	local enab defgrp
+
+	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	config_foreach cgroupinit_create_group cgroup
+	return 0
+}
+
+start_service () {
+	cgroupinit_configure_cgroups
+	[ $? -eq 0 ] || return
+
+	procd_open_instance
+	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	local cgdir procs prc
+
+	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
+		procs=$(cat $cgdir/cgroup.procs)
+		for prc in $procs; do
+			echo $prc > $CGBASEDIR/cgroup.procs
+		done
+		rmdir $cgdir
+	done
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

icwmp/Config.in

@@ -15,10 +15,31 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
+choice
+	prompt "enable xmpp feature"
+	default disable
+
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2016-03-30
+PKG_VERSION:=3.0-2016-07-01
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=dc22607a3da41e5c3c095dc5fed33d4ec7b3fbb5
+PKG_SOURCE_VERSION:=85ecddf5a3993e60079c3a67bc74267480d0dc1a
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,7 +34,7 @@ define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl
 endef
 
 define Package/icwmp/description
@@ -68,7 +68,7 @@ endif
 
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
-	
+
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -86,6 +86,9 @@ CONFIGURE_ARGS += \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
 
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \

inteno-netmodes/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2016 Inteno
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=inteno-netmodes
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inteno-netmodes
+  CATEGORY:=Base system
+  TITLE:=Predefined Network Modes
+endef
+
+define Package/inteno-netmodes/description
+	Predefined Network Modes
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/inteno-netmodes/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/config/netmode

@@ -0,0 +1,5 @@
+config mode 'setup'
+        option dir '/etc/netmodes'
+        option detail ''
+        option curmode 'routed'
+

inteno-netmodes/files/etc/init.d/netmode

@@ -0,0 +1,154 @@
+#!/bin/sh /etc/rc.common
+
+START=10
+USE_PROCD=1
+
+. /usr/share/libubox/jshn.sh
+. /lib/network/config.sh
+
+local modedir=$(uci -q get netmode.setup.dir)
+[ -n "$modedir" ] || modedir="/etc/netmodes"
+
+get_device() {
+	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
+	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
+        local cnt=1
+        local idx=0
+
+	local pnum=$(echo $PORT_NAMES | wc -w)
+
+	if [ $pnum -le 2 ]; then
+		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
+	fi
+
+	# get index of interface name
+	for i in $PORT_NAMES; do
+		if [ "$i" == "$1" ]; then
+			idx=$cnt
+		fi
+		cnt=$((cnt+1))
+	done
+
+        # get port name from index
+	cnt=1
+	for i in $PORT_ORDER; do
+		if [ "$cnt" == "$idx" ]; then
+			echo $i
+		fi
+		cnt=$((cnt+1))
+	done
+}
+
+populate_netmodes() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	delete_netmode() {
+		uci delete netmode.$1
+	}
+
+	config_load netmode
+
+	config_foreach delete_netmode netmode
+	uci commit netmode
+
+	wan=$(get_device WAN)
+	lan1=$(get_device LAN1)
+	lan2=$(get_device LAN2)
+	lan3=$(get_device LAN3)
+	lan4=$(get_device LAN4)
+	lan5=$(get_device LAN5)
+
+	for file in $(find $modedir -type f); do
+		grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+		grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
+		grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
+		grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
+		grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
+	done
+
+	local hardware=$(db get hw.board.hardware)
+	local keys lang desc exp exclude
+	for mode in $(ls $modedir); do
+			lang=""
+			desc=""
+			exp=""
+			uci -q set netmode.$mode=netmode
+			uci -q set netmode.$mode.conf=$mode
+			json_load "$(cat $modedir/$mode/DETAILS)"
+
+			exclude=0
+			json_get_var excluded_boards excluded_boards
+			for board in $excluded_boards; do
+				if [ "$board" == "$hardware" ]; then
+					uci -q delete netmode.$mode
+					exclude=1
+					break
+				fi
+			done
+			[ $exclude -eq 1 ] && continue
+
+			json_select description
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var desc $lang
+				uci -q set netmode.$mode."desc_$lang"="$desc"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
+				json_select ..
+			done
+			json_select ..
+
+			json_select explanation
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var exp $lang
+				uci -q set netmode.$mode."exp_$lang"="$exp"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
+				json_select ..
+			done
+			json_select ..
+
+			json_get_var cred credentials
+			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var reboot reboot
+			uci -q set netmode.$mode.reboot="$reboot"
+	done
+	uci commit netmode
+}
+
+switch_netmode() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	config_load netmode
+
+	config_get curmode setup curmode
+	config_get conf $curmode conf
+	cp /etc/netmodes/$conf/* /etc/config/
+	rm -f /etc/config/DETAILS
+	sync
+	local reboot=$(uci -q get netmode.$curmode.reboot)
+	if [ "$reboot" == "0" ]; then
+		/etc/init.d/enviroment reload
+	else
+		reboot &
+	fi
+}
+
+start_service() {
+	populate_netmodes
+}
+
+reload_service() {
+        switch_netmode
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger netmode
+}
+

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -0,0 +1,13 @@
+{
+	"description": [
+		{ "en" : "Bridged IPTV" },
+		{ "sv" : "Brygg IPTV" }
+	],
+	"explanation": [
+		{ "en" : "LAN4 port is bridged with IPTV VLAN" },
+		{ "sv" : "LAN4 port överbryggas med IPTV VLAN" }
+	],
+	"credentials" : 0,
+	"excluded_boards" : "CG300 CG301"
+}
+

inteno-netmodes/files/etc/netmodes/bridged/dhcp

@@ -0,0 +1,22 @@
+config dnsmasq
+	option domainneeded	1
+	option boguspriv	1
+	option filterwin2k	0
+	option localise_queries	1
+	option rebind_protection 0
+	option rebind_localhost 1
+	option local	'/lan/'
+	option domain	'lan'
+	option expandhosts	1
+	option nonegcache	0
+	option authoritative	1
+	option readethers	1
+	option leasefile	'/tmp/dhcp.leases'
+	option resolvfile	'/tmp/resolv.conf.auto'
+
+config dhcp lan
+	option interface	lan
+	option start 	100
+	option limit	150
+	option leasetime	12h
+

inteno-netmodes/files/etc/netmodes/bridged/firewall

@@ -0,0 +1,114 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	list   network		'iptv'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -0,0 +1,23 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -0,0 +1,18 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/bridged/mcpd

@@ -0,0 +1,18 @@
+
+config mcpd 'mcpd'
+	option igmp_query_response_interval '10'
+	option igmp_last_member_query_interval '10'
+	option igmp_robustness_value '2'
+	option igmp_lan_to_lan_multicast '0'
+	option igmp_max_groups '25'
+	option igmp_max_sources '10'
+	option igmp_max_members '25'
+	option igmp_fast_leave '1'
+	option igmp_join_immediate '0'
+	option igmp_proxy_enable '0'
+	option igmp_snooping_enable '2'
+	option igmp_snooping_interfaces 'br-iptv'
+	option igmp_default_version '2'
+	option igmp_query_interval '120'
+	option igmp_proxy_interfaces 'iptv'
+

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -0,0 +1,37 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ipaddr '192.168.1.1'
+	option netmask '255.255.255.0'
+	option ifname '$LAN1 $LAN2 $LAN3'
+	option ip6assign '60'
+	
+config interface 'wan'
+	option type 'anywan'
+	option proto 'dhcp'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
+	option ifname 'ptm0.1 atm0.1 $WAN.1'
+	option ipv6 '1'
+
+config interface 'iptv'
+	option type 'bridge'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
+	option defaultroute '0'
+
+config interface 'wan6'
+	option proto 'dhcpv6'
+	option ifname '@wan'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -0,0 +1,13 @@
+{
+	"description": [
+		{ "en" : "VoIP + Bridged IPTV" },
+		{ "sv" : "VoIP + Brygg IPTV" }
+	],
+	"explanation": [
+		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
+		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
+	],
+	"credentials" : 0,
+	"excluded_boards" : "CG300 CG301"
+}
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp

@@ -0,0 +1,22 @@
+config dnsmasq
+	option domainneeded	1
+	option boguspriv	1
+	option filterwin2k	0
+	option localise_queries	1
+	option rebind_protection 0
+	option rebind_localhost 1
+	option local	'/lan/'
+	option domain	'lan'
+	option expandhosts	1
+	option nonegcache	0
+	option authoritative	1
+	option readethers	1
+	option leasefile	'/tmp/dhcp.leases'
+	option resolvfile	'/tmp/resolv.conf.auto'
+
+config dhcp lan
+	option interface	lan
+	option start 	100
+	option limit	150
+	option leasetime	12h
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -0,0 +1,114 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	list   network		'iptv'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -0,0 +1,34 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm2.1'
+        option baseifname 'atm2'
+        option atmtype 'ubr'
+        option name 'atm_voip'
+        option vpi '8'
+        option vci '55'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -0,0 +1,32 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'eth_voip'
+	option ifname '$WAN.200'
+	option baseifname '$WAN'
+	option vlan8021q '200'
+	option vlan8021p '0'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_voip'
+	option ifname 'ptm0.200'
+	option baseifname 'ptm0'
+	option vlan8021q '200'
+	option vlan8021p '0'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd

@@ -0,0 +1,18 @@
+
+config mcpd 'mcpd'
+	option igmp_query_response_interval '10'
+	option igmp_last_member_query_interval '10'
+	option igmp_robustness_value '2'
+	option igmp_lan_to_lan_multicast '0'
+	option igmp_max_groups '25'
+	option igmp_max_sources '10'
+	option igmp_max_members '25'
+	option igmp_fast_leave '1'
+	option igmp_join_immediate '0'
+	option igmp_proxy_enable '0'
+	option igmp_snooping_enable '2'
+	option igmp_snooping_interfaces 'br-iptv'
+	option igmp_default_version '2'
+	option igmp_query_interval '120'
+	option igmp_proxy_interfaces 'iptv'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network

@@ -0,0 +1,45 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ipaddr '192.168.1.1'
+	option netmask '255.255.255.0'
+	option ifname '$LAN1 $LAN2 $LAN3'
+	option ip6assign '60'
+	
+config interface 'wan'
+	option type 'anywan'
+	option proto 'dhcp'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
+	option ifname 'ptm0.1 atm0.1 $WAN.1'
+	option ipv6 '1'
+
+config interface 'iptv'
+	option type 'bridge'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
+	option defaultroute '0'
+
+config interface 'voip'
+	option type 'anywan'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.200 atm2.1 $WAN.200'
+	option defaultroute '0'
+
+config interface 'wan6'
+	option proto 'dhcpv6'
+	option ifname '@wan'
+

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -0,0 +1,13 @@
+{
+	"description": [
+		{ "en" : "Wireless Repeater" },
+		{ "sv" : "Trådlös Repeater" }
+	],
+	"explanation": [
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point." },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten." }
+	],
+	"credentials" : 1,
+	"reboot" : 0
+}
+

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -0,0 +1,121 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/repeater/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -0,0 +1,24 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
+	option ifname '$WAN.1'
+	option reqopts '43'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater/uhttpd

@@ -0,0 +1,33 @@
+config uhttpd 'main'
+	list listen_http '0.0.0.0:80'
+	list listen_http '[::]:80'
+	list listen_http '0.0.0.0:8080'
+	list listen_http '[::]:8080'
+	list listen_http '0.0.0.0:8181'
+	list listen_http '[::]:8181'
+	list listen_https '0.0.0.0:443'
+	list listen_https '[::]:443'
+	option redirect_https '1'
+	option home '/www'
+	option rfc1918_filter '1'
+	option max_requests '3'
+	option max_connections '100'
+	option cert '/etc/uhttpd.crt'
+	option key '/etc/uhttpd.key'
+	option cgi_prefix '/cgi-bin'
+	option script_timeout '60'
+	option network_timeout '30'
+	option http_keepalive '20'
+	option tcp_keepalive '1'
+	option ubus_prefix '/ubus'
+
+config cert 'px5g'
+	option days '730'
+	option bits '1024'
+	option country 'ZZ'
+	option state 'Somewhere'
+	option location 'Uknown'
+	option commonname 'OpenWrt'
+
+config logopts 'logopts'
+

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -0,0 +1,101 @@
+config wifi-status 'status'
+	option wlan '1'
+	option wps '1'
+	option sched_status '0'
+	option schedule '0'
+
+config wifi-device 'wl0'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'a'
+	option bandwidth '20'
+	option hwmode '11ac'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option beamforming '0'
+	option doth '1'
+	option dfsc '1'
+
+config wifi-iface
+	option device 'wl0'
+	option network 'wan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option autoconf '1'
+
+config wifi-device 'wl1'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'b'
+	option bandwidth '20'
+	option hwmode 'auto'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option doth '0'
+	option apsta '1'
+
+config wifi-iface
+	option device 'wl1'
+	option ifname 'wl1'
+	option network 'wan'
+	option mode 'wet'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option wps_pbc '0'
+	option wmf_bss_enable '1'
+	option autoconf '1'
+
+config wifi-iface
+	option device 'wl1'
+	option network 'wan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option autoconf '1'
+

inteno-netmodes/files/etc/netmodes/routed/DETAILS

@@ -0,0 +1,12 @@
+{
+	"description": [
+		{ "en" : "Fully Routed (NAT)" },
+		{ "sv" : "Fullt Omdirigerad (NAT)" }
+	],
+	"explanation": [
+		{ "en" : "" },
+		{ "sv" : "" }
+	],
+	"credentials" : 0
+}
+

inteno-netmodes/files/etc/netmodes/routed/dhcp

@@ -0,0 +1,22 @@
+config dnsmasq
+	option domainneeded	1
+	option boguspriv	1
+	option filterwin2k	0
+	option localise_queries	1
+	option rebind_protection 0
+	option rebind_localhost 1
+	option local	'/lan/'
+	option domain	'lan'
+	option expandhosts	1
+	option nonegcache	0
+	option authoritative	1
+	option readethers	1
+	option leasefile	'/tmp/dhcp.leases'
+	option resolvfile	'/tmp/resolv.conf.auto'
+
+config dhcp lan
+	option interface	lan
+	option start 	100
+	option limit	150
+	option leasetime	12h
+

inteno-netmodes/files/etc/netmodes/routed/firewall

@@ -0,0 +1,153 @@
+config settings settings
+        option disabled 0
+
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+
+config rule
+	option name		Allow-IGMP
+	option src		wan
+	option proto		igmp
+	option family		ipv4
+	option target		ACCEPT
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+
+config rule
+	option name		Allow-MLD
+	option src		wan
+	option proto		icmp
+	option src_ip		fe80::/10
+	list icmp_type		'130/0'
+	list icmp_type		'131/0'
+	list icmp_type		'132/0'
+	list icmp_type		'143/0'
+	option family		ipv6
+	option target		ACCEPT
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto	icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+
+# allow IPsec/ESP and ISAKMP passthrough
+config rule
+	option src		wan
+	option dest		lan
+	option proto		esp
+	option target		ACCEPT
+
+config rule
+	option src		wan
+	option dest		lan
+	option dest_port	500
+	option proto		udp
+	option target		ACCEPT
+
+config dmz dmz
+	option enabled '0'
+	option exclude_ports '5060 7547'
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for prioritizing some specific packets
+config include
+	option path /etc/firewall.qos
+	option reload 1
+
+# include a file with rules for DMZ Host
+config include dmzhost
+	option path /etc/firewall.dmz
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_adsl

@@ -0,0 +1,13 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/routed/mcpd

@@ -0,0 +1,14 @@
+config mcpd 'mcpd'
+	option igmp_proxy_interfaces 'wan'
+	option igmp_default_version '2'
+	option igmp_query_interval '125'
+	option igmp_query_response_interval '100'
+	option igmp_last_member_query_interval '10'
+	option igmp_robustness_value '2'
+	option igmp_max_groups '25'
+	option igmp_max_sources '10'
+	option igmp_max_members '25'
+	option igmp_fast_leave '1'
+	option igmp_proxy_enable '1'
+	option igmp_snooping_enable '2'
+	option igmp_snooping_interfaces 'br-lan'

inteno-netmodes/files/etc/netmodes/routed/network

@@ -0,0 +1,29 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ipaddr '192.168.1.1'
+	option netmask '255.255.255.0'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ip6assign '60'
+	
+config interface 'wan'
+	option type 'anywan'
+	option proto 'dhcp'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
+	option ifname 'ptm0.1 atm0.1 $WAN.1'
+	option ipv6 '1'
+
+config interface 'wan6'
+	option proto 'dhcpv6'
+	option ifname '@wan'
+

iop/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=iop
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/iop
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=iop utilities
+endef
+
+define Package/iop/description
+	This package contains Intenos Iop utilities
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/iop/install
+	true
+endef
+
+$(eval $(call BuildPackage,iop))

iop/configs/config

@@ -0,0 +1,194 @@
+CONFIG_BUILD_NLS=y
+CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_CCACHE=y
+CONFIG_DEBUG=y
+CONFIG_DEVEL=y
+CONFIG_LOCALMIRROR="http://mirror.inteno.se/mirror"
+CONFIG_PACKAGE_6in4=y
+CONFIG_PACKAGE_6rd=y
+CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
+CONFIG_PACKAGE_alsa-lib=y
+CONFIG_PACKAGE_bind-host=y
+CONFIG_PACKAGE_chat=y
+CONFIG_PACKAGE_comgt=y
+CONFIG_PACKAGE_comgt-directip=y
+CONFIG_PACKAGE_comgt-ncm=y
+CONFIG_PACKAGE_crashlog=y
+CONFIG_PACKAGE_ddns-scripts=y
+CONFIG_PACKAGE_ds-lite=y
+CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
+CONFIG_PACKAGE_getopt=y
+CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
+CONFIG_PACKAGE_icwmp-curl=y
+CONFIG_PACKAGE_inteno-netmodes=y
+CONFIG_PACKAGE_iperf-mt=y
+CONFIG_PACKAGE_ipset=y
+CONFIG_PACKAGE_iptables=y
+CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
+CONFIG_PACKAGE_iptables-mod-filter=y
+CONFIG_PACKAGE_iptables-mod-ipopt=y
+CONFIG_PACKAGE_iup=y
+CONFIG_PACKAGE_iwatchdog=y
+CONFIG_PACKAGE_juci=y
+CONFIG_PACKAGE_juci-broadcom-dsl=y
+CONFIG_PACKAGE_juci-broadcom-ethernet=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-broadcom-vlan=y
+CONFIG_PACKAGE_juci-broadcom-wl=y
+CONFIG_PACKAGE_juci-broadcom-xdsl=y
+CONFIG_PACKAGE_juci-ddns=y
+CONFIG_PACKAGE_juci-diagnostics=y
+CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
+CONFIG_PACKAGE_juci-dropbear=y
+CONFIG_PACKAGE_juci-ethernet=y
+CONFIG_PACKAGE_juci-event=y
+CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-icwmp=y
+CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-inteno-backup=y
+CONFIG_PACKAGE_juci-inteno-multiwan=y
+CONFIG_PACKAGE_juci-inteno-provisioning=y
+CONFIG_PACKAGE_juci-inteno-qos=y
+CONFIG_PACKAGE_juci-inteno-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
+CONFIG_PACKAGE_juci-minidlna=y
+CONFIG_PACKAGE_juci-mod-status=y
+CONFIG_PACKAGE_juci-mod-system=y
+CONFIG_PACKAGE_juci-natalie-dect=y
+CONFIG_PACKAGE_juci-netmode=y
+CONFIG_PACKAGE_juci-network-netifd=y
+CONFIG_PACKAGE_juci-printer=y
+CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
+CONFIG_PACKAGE_juci-snmpd=y
+CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-inteno=y
+CONFIG_PACKAGE_juci-ubus-core=y
+CONFIG_PACKAGE_juci-upnp=y
+CONFIG_PACKAGE_juci-usb=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
+CONFIG_PACKAGE_kmod-siit=y
+CONFIG_PACKAGE_layer2interface=y
+CONFIG_PACKAGE_libcgroup-daemon=y
+CONFIG_PACKAGE_libcgroup=y
+# CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_ldd=y
+CONFIG_PACKAGE_libdaemon=y
+CONFIG_PACKAGE_libgmp=y
+CONFIG_PACKAGE_libreadline=y
+CONFIG_PACKAGE_minidlna=y
+CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
+CONFIG_PACKAGE_multiwan=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netcheck=y
+CONFIG_PACKAGE_ntfs-3g=y
+CONFIG_PACKAGE_odhcp6c=y
+CONFIG_PACKAGE_odhcpd=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_PACKAGE_p910nd=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_power-management=y
+CONFIG_PACKAGE_ppp-mod-pppoa=y
+CONFIG_PACKAGE_ppp-mod-pppol2tp=y
+CONFIG_PACKAGE_ppp-multilink=y
+# CONFIG_PACKAGE_ppp is not set
+CONFIG_PACKAGE_qos-scripts=y
+CONFIG_PACKAGE_qrencode=y
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_samba3=y
+CONFIG_PACKAGE_samba3-nmbd=y
+CONFIG_PACKAGE_snmpd=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_tc=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_tptest=y
+CONFIG_PACKAGE_traceroute6=y
+CONFIG_PACKAGE_umbim=y
+CONFIG_PACKAGE_uqmi=y
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_usbreset=y
+CONFIG_PACKAGE_wwan=y
+CONFIG_PACKAGE_xl2tpd=y
+CONFIG_PACKAGE_zoneinfo-core=y
+CONFIG_PACKAGE_zoneinfo-europe=y
+CONFIG_TARGET_CUSTOMER="INT"
+CONFIG_TARGET_ROOTFS_TARGZ=y
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+CONFIG_BUILD_LOG=y
+CONFIG_BUSYBOX_CONFIG_ADDUSER=y
+CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_BUSYBOX_CONFIG_DELUSER=y
+# CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
+CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
+CONFIG_BUSYBOX_CONFIG_HTTPD=y
+CONFIG_BUSYBOX_CONFIG_INSMOD=y
+CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
+CONFIG_BUSYBOX_CONFIG_LOGIN=y
+CONFIG_BUSYBOX_CONFIG_LSMOD=y
+CONFIG_BUSYBOX_CONFIG_LSPCI=y
+CONFIG_BUSYBOX_CONFIG_LSUSB=y
+CONFIG_BUSYBOX_CONFIG_MICROCOM=y
+CONFIG_BUSYBOX_CONFIG_RMMOD=y
+CONFIG_BUSYBOX_CONFIG_STTY=y
+CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
+CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
+CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
+# CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
+# CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_BUSYBOX_CONFIG_PAM is not set
+# CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
+# CONFIG_SIGNED_PACKAGES is not set

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/iop.completion

@@ -0,0 +1,89 @@
+# Bash completion for IOPSYS "./iop" utility
+# Source this file into the curent shell or copy it into
+# /usr/share/bash-completion/completions/ and start a new shell
+# for automatic availability.
+
+_iop_get_profiles()
+{
+    find feeds/feed_inteno_targets/iopsys-*/ -name '*.diff' \
+        |awk -F'/' '{print$NF}' \
+        |awk -F. '{print$1}'
+}
+
+_iop_get_models()
+{
+    find feeds/feed_inteno_targets/iopsys-*/ -mindepth 1 -maxdepth 1 -type d \
+        |awk -F'/' '{print$NF}' \
+        |egrep '^(cg|dg|eg|vg|vox)[0-9]'
+}
+
+_iop_get_model_customers()
+{
+    local model=$1
+    find customerconfigs/$prev -mindepth 1 -maxdepth 1 -type d \
+        |awk -F'/' '{print$NF}'
+}
+
+_iop() 
+{
+    local cur prev iopcmds
+
+    COMPREPLY=()
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    prev="${COMP_WORDS[COMP_CWORD-1]}"
+
+    iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
+             feeds_update genconfig generate_tarballs install_key \
+             scp_changes setup_host ssh_install_key ssh_sysupgrade \
+             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
+             update_package"
+
+    if [ $COMP_CWORD -eq 1 ] ; then
+
+        # Complete the primary iop command
+        COMPREPLY=($(compgen -W "${iopcmds}" -- ${cur}))  
+        return 0
+
+    else
+    
+        # Complete the arguments to "iopcmds"
+        local cmd="${COMP_WORDS[1]}"
+        case "$cmd" in
+
+            extract_core)
+                if [ "$prev" == "-e" ] ; then
+                    _filedir -d
+                else
+                    COMPREPLY=( $(compgen -W "-e -h" -- ${cur}) )
+                fi
+                return 0
+                ;;
+
+            genconfig)
+                if [ "$prev" == "-p" ] ; then
+                    local profiles=$(_iop_get_profiles)
+                    COMPREPLY=( $(compgen -W "juci $profiles" -- ${cur}) )
+                elif [[ $cur == -* ]] ; then
+                    COMPREPLY=( $(compgen -W "-c -h -p -s -t -u -v" -- ${cur}) )
+                else
+                    local models=$(_iop_get_models)
+                    if echo $models |grep -qw -- $prev ; then
+                        local customers=$(_iop_get_model_customers $prev)
+                        COMPREPLY=( $(compgen -W "$customers" -- ${cur}) )
+                    else
+                        COMPREPLY=( $(compgen -W "$models" -- ${cur}) )
+                    fi
+                fi
+                return 0
+                ;;
+
+            *)
+                # No arguments or arguments not supported yet
+                ;;
+        esac
+    fi
+}
+
+complete -F _iop ./iop
+complete -F _iop iop
+

iop/scripts/cfe_upgrade.sh

@@ -0,0 +1,42 @@
+# this is a developer helper script to install firmware on a remote host running in CFE mode
+
+function usage {
+	echo "usage: $0 cfe_upgrade <host> <file>"
+}
+
+function cfe_upgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "CFE upgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] &&  curl -i -F filedata=@$2  http://$1/upload.cgi && echo "upgrade done!"
+}
+
+register_command "cfe_upgrade" "<host> <file>  Install firmware on remote host in CFE mode"
+
+function cfe_upgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 cfe_upgrade_latest <host>"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop cfe_upgrade $1 $IMAGE
+	}
+}
+
+register_command "cfe_upgrade_latest" "<host>  Install latest firmware on remote host in CFE mode"

iop/scripts/extract_core.sh

@@ -0,0 +1,88 @@
+#!/bin/bash
+
+# Intermediate repo for core packages
+core_repo=git@public.inteno.se:iopsys-cc-core.git
+
+# Repo to which core packages should be imported
+import_repo=git@public.inteno.se:feed-inteno-openwrt.git
+import_branch=openwrt-cc-core
+
+
+function export_core {
+
+    local path=$1
+
+    # export paths to their own branches in an intermediate repo
+    repo=$(basename $path)
+    git subtree push -q --prefix=$path $core_repo $repo
+}
+
+
+function update_core {
+    
+    local path=$1
+    
+    if [ ! -d $topdir/feeds/feed_inteno_openwrt ]; then
+	echo "You need to run ./iop feeds_update"
+	exit -1
+    fi
+
+    # ensure that we are synced with the remote
+    cd $topdir/feeds/feed_inteno_openwrt
+    git checkout $import_branch
+    git pull
+
+    # first install subtrees if they don't already exist
+    repo=$(basename $path)
+    git subtree add --prefix=$repo $core_repo $repo
+    
+    # install subtrees in feed from intermediate repo
+    repo=$(basename $path)
+    echo "Exporting $repo"
+    git subtree pull -q -m "Exporting $repo" --prefix=$repo $core_repo $repo
+
+    # update import repo sync branch
+    git push origin $import_branch
+}
+
+function display_help {
+    
+    echo "Usage: ./iop export_core -e path/to/package"
+}
+
+function extract_core {
+
+# Dir of script location
+topdir=$(pwd)
+
+
+if [ $# -eq 0 ]; then
+    display_help
+    exit -1
+fi
+
+# Execute user command
+while getopts "he:" opt; do
+    case $opt in
+	e)
+	    path=${OPTARG}
+	    echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
+	    export_core $path
+	    update_core $path
+	    ;;
+	h)
+	    display_help
+	    exit 0
+	    ;;
+	\?)
+	    display_help
+	    exit -1
+	    ;;
+	esac
+done
+
+}
+
+register_command "extract_core" "Extract core package to feeds_inteno_openwrt"
+
+

iop/scripts/feeds_update.sh

@@ -0,0 +1,66 @@
+#! /bin/bash
+
+function feeds_update {
+
+    developer=0
+
+    git remote -v | grep -q http || developer=1
+
+    #while getopts "d" opt; do
+    #    case $opt in
+    #        d)
+    #	    developer=1
+    #            ;;
+    #        \?)
+    #            echo "Invalid option: -$OPTARG" >&2
+    #            exit 1
+    #            ;;
+    #    esac
+    #done
+
+    cp .config .genconfig_config_bak
+
+    rm -rf package/feeds
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
+
+
+    ./scripts/feeds install -f -p feed_inteno_openwrt -a
+    ./scripts/feeds install -f -p feed_inteno_juci -a
+    ./scripts/feeds install -f -p feed_inteno_packages -a
+    ./scripts/feeds install -f -p feed_inteno_broadcom -a
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -f -p feed_inteno_targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -a 
+    ./scripts/feeds uninstall asterisk18
+    ./scripts/feeds uninstall zstream
+    ./scripts/feeds uninstall mtd-utils
+    ./scripts/feeds install -f -p feed_inteno_packages mtd-utils
+    ./scripts/feeds uninstall qrencode
+    ./scripts/feeds install -f -p feed_inteno_packages qrencode
+    ./scripts/feeds uninstall libwebsockets
+    ./scripts/feeds uninstall libwebsockets-openssl
+    ./scripts/feeds install -f -p feed_inteno_juci libwebsockets
+
+    rm -rf package/feeds/oldpackages/libzstream # have to run this for now since uninstall is not working every time
+
+    cp .genconfig_config_bak .config
+    make defconfig
+
+    # record when we last run this script
+    touch tmp/.iop_bootstrap 
+
+    # always return true
+    exit 0
+}
+
+register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+
+
+
+

iop/scripts/genconfig.sh

@@ -0,0 +1,259 @@
+#!/bin/bash
+
+function genconfig {
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400"
+    target="bogus"
+
+    set_target() {
+
+	local profile=$1
+
+	for p in $iopsys_brcm63xx_mips; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+            fi
+	done
+
+	for p in $iopsys_brcm63xx_arm; do
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+            fi
+	done
+    }
+
+
+    git remote -v | grep -q http || {
+	DEVELOPER=1
+
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
+	done
+    }
+
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }
+
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }
+
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }
+
+    generate_config()
+    {
+	DIFFFILE="$1"
+	MASTERFILE="$2"
+	while read p; do
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
+	done < $DIFFFILE
+    }
+
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
+	fi
+
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+	# Base config on master
+	v  "Config $BOARDTYPE selected"
+	v "cp  $CONFIGPATH/config  .config"
+	cp  $CONFIGPATH/config  .config
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
+	else
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
+	fi
+
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+	use_local_mirror
+    fi
+}
+
+
+register_command "genconfig" "Generate configuration for board and customer"

iop/scripts/generate_tarballs.sh

@@ -0,0 +1,88 @@
+#!/bin/sh
+
+
+
+build_bcmkernel_consumer() {
+	local tarfile bcmkernelcommith
+	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/$sdkversion.mk | cut -d'=' -f2)
+	# do not build bcmopen sdk if it was already built before
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/bcmkernel-3.4-$sdkversion/bcm963xx/release
+	sh do_consumer_release -p $profile -y
+	tarfile='out/bcm963xx_*_consumer.tar.gz'
+	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
+	scp $tarfile inteno@ihgsp.inteno.se:/home/inteno/public/www/iopsys/consumer/bcmopen-$profile-$bcmkernelcommith.tar.gz
+	rm -f $tarfile
+	cd $curdir
+}
+
+build_natalie_consumer() {
+	# create natalie-dect open version tar file
+	local natalieversion nataliecommith
+	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
+	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/natalie-dect-$natalieversion/
+	mkdir natalie-dect-open-$natalieversion
+	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
+	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
+	rm -rf natalie-dect-open-$natalieversion
+	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
+	cd $curdir
+}
+
+build_endptcfg_consumer() {
+	# create endptcfg open version tar file
+	local endptversion endptcommith
+	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
+	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptcfg/Makefile | cut -d'=' -f2)
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/endptcfg-$profile-$endptversion-$endptcommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/endptcfg-$endptversion/
+	mkdir endptcfg-open-$endptversion
+	cp endptcfg endptcfg-open-$endptversion/
+	tar -czv  endptcfg-open-$endptversion/ -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	scp endptcfg-$profile-$endptversion-$endptcommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp endptcfg-$profile-$endptversion-$endptcommith.tar.gz $curdir/
+	rm -rf endptcfg-open-$endptversion
+	rm -f endptcfg-$profile-$endptversion-$endptcommith.tar.gz
+	cd $curdir
+}
+
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	ssh inteno@iopsys.inteno.se "ls public/www/iopsys/consumer/ice-client-$profile-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*_uClibc-0.9.33.*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	scp ice-client-$profile-$iceversion-$icecommith.tar.gz inteno@iopsys.inteno.se:/home/inteno/public/www/iopsys/consumer/
+	cp ice-client-$profile-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$profile-$iceversion-$icecommith.tar.gz
+	cd $curdir
+}
+
+
+function generate_tarballs {
+
+    git remote -v | grep -q http && return # do not continue if this is an open SDK environment
+
+    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
+    sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
+    curdir=$(pwd)
+
+    build_bcmkernel_consumer
+    build_natalie_consumer
+    build_endptcfg_consumer
+    build_ice_consumer
+
+}
+
+register_command "generate_tarballs" "Generate tarballs for openstk"
+

iop/scripts/install_key.sh

@@ -0,0 +1,18 @@
+# this is a developer helper script to install the public ssh key in the created image
+
+function install_key {
+
+    mkdir -p files/etc/dropbear
+    test -e ~/.ssh/id_dsa.pub && cat ~/.ssh/id_dsa.pub >>files/etc/dropbear/authorized_keys
+    test -e ~/.ssh/id_rsa.pub && cat ~/.ssh/id_rsa.pub >>files/etc/dropbear/authorized_keys
+    chmod 0644 files/etc/dropbear/authorized_keys
+
+    echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
+    echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
+    echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
+
+    echo Done
+}
+
+register_command "install_key" "Install the user's public ssh key in the created image"

iop/scripts/scp_changes.sh

@@ -0,0 +1,70 @@
+# this is a developer helper script to SCP changed files to remote host
+
+ROOT=build_dir/target-mips_uClibc-0.9.33.2/root-iopsys-brcm63xx-mips/
+ROOT_OLD=tmp/root_old/
+ROOT_TMP=tmp/root_tmp/
+
+function scp_changes_reset {
+	{ cd `dirname $0`
+		rm -rf "$ROOT_OLD"
+		mkdir -p "$ROOT_OLD"
+		cp -a "$ROOT"* "$ROOT_OLD"
+	}
+}
+
+function scp_changes {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 scp_changes <host/-r(eset)/-p(retend)>"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		if [ ! -d $ROOT ]; then
+			echo "$ROOT does not exist"
+			echo "please build the project first"
+			exit 1;
+		fi
+		if [ "$1" = "-r" ]; then
+			echo "reset changes"
+			scp_changes_reset
+			exit 0
+		fi
+		if [ ! -d $ROOT_OLD ]; then
+			echo "$ROOT_OLD does not exist"
+			echo "you didn't store state of previous buildroot"
+			#echo "please run ./scp_changes_reset.sh"
+			echo "doing it now"
+			scp_changes_reset
+			exit 1;
+		fi
+		FILES=`diff -rq "$ROOT" "$ROOT_OLD" 2>&1 | sed -ne "s?^Files .* and $ROOT_OLD\\(.*\\) differ?\\1?p" -ne "s?^Only in $ROOT\\(.*\\): \\(.*\\)?\\1/\\2?p"`
+		if [ "$1" = "-p" ]; then
+			echo "files that would be copied:"
+			echo $FILES
+			exit 0
+		fi
+		for f in $FILES
+		do
+			mkdir -p "$ROOT_TMP`dirname $f`"
+			cp -af "$ROOT$f" "$ROOT_TMP$f"
+		done
+		if [ -d "$ROOT_TMP" ]; then
+			echo "scp changed files to $1"
+			pushd "$ROOT_TMP" 2>&1 >/dev/null
+			scp -r * root@$1:/
+			RETVAL=$?
+			popd 2>&1 >/dev/null
+			rm -rf "$ROOT_TMP"
+			if [ "$RETVAL" -eq 0 ]; then
+				scp_changes_reset
+			else
+				echo "scp error"
+				exit $RETVAL
+			fi
+		else
+			echo "no change"
+		fi
+	}
+}
+
+register_command "scp_changes" "<host/-r(eset)/-p(retend)>  SCP only changed files to device"

iop/scripts/ssh_install_key.sh

@@ -0,0 +1,17 @@
+# this is a developer helper script to install the public ssh key on host running dropbear
+
+function ssh_install_key {
+	if [ -e ~/.ssh/id_rsa.pub ]; then
+		echo "Adding public RSA key to $1"
+		KEY=`cat ~/.ssh/id_rsa.pub`
+	elif [ -e ~/.ssh/id_dsa.pub ]; then
+		echo "Adding public DSA key to $1"
+		KEY=`cat ~/.ssh/id_dsa.pub`
+	else
+		echo "No public key found"
+		exit 1
+	fi
+	ssh root@$1 "echo '$KEY' >> /etc/dropbear/authorized_keys" && echo ok
+}
+
+register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh root@$1 "sysupgrade $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.y | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/status.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+function status {
+    topdir=$PWD
+    echo
+    for subdir in .git $(find feeds/ -type d -name .git); do
+
+	echo "======= $(dirname $subdir) ========"
+	cd $subdir/..
+	if git status |grep -Eq '^\s([^\s\(]+)'; then
+	    git status |grep -Ev '(nothing added|use "git |^$)'
+	else
+	    git status |grep -E "(On branch|HEAD detached)"
+	fi
+	cd $topdir
+    done
+    echo
+}
+
+register_command "status" "Display the state of your working tree"

iop/scripts/update_package.sh

@@ -0,0 +1,602 @@
+#!/bin/bash
+
+
+print_git_update()
+{
+    echo "pkg -> ${PKG_NAME}"
+    echo "	PKG_BUILD_DIR	=	${PKG_BUILD_DIR}"
+    echo "	PKG_DIR		=	${PKG_DIR}"
+    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
+    echo "	PKG_NAME	=	${PKG_NAME}"
+    echo "	PKG_SOURCE_URL	=	${PKG_SOURCE_URL}"
+    echo "	PKG_SOURCE_PROTO=	${PKG_SOURCE_PROTO}"
+    echo "	PKG_SOURCE_VERSION=	${PKG_SOURCE_VERSION}"
+    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
+    echo "	PKG_SOURCE_VERSION_FILE=${PKG_SOURCE_VERSION_FILE}"
+}
+
+is_git_same()
+{
+    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+    #echo "$PKG_NAME $git_last = ${PKG_SOURCE_VERSION}"
+    if [ "$git_last" == "${PKG_SOURCE_VERSION}" ]
+    then
+	return 0
+    fi
+    return 1
+}
+
+update_this_pkg()
+{
+    mk_hash=$(get_makefile_hash)
+
+    if [ "$mk_hash" != "${PKG_SOURCE_VERSION}" ]
+    then
+	echo "${PKG_NAME}:"
+	echo "	build dir     = ${PKG_BUILD_DIR}"
+	echo "	feed makefile = ${mk_hash}"
+	echo "	stale hash    = ${PKG_SOURCE_VERSION}"
+	echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
+	echo "	Git hash in package makefile and the git hash recorded from last compile of"
+	echo "	package is different. You probably want to recompile the package"
+	echo "	to get an up to date version in ${PKG_BUILD_DIR}/.git_update"
+	echo ""
+
+	echo -n "	Shold we continue with the update anyway? [y/N]:"
+	read answer
+	echo ""
+
+	case $answer in
+	    y|Y)
+		;;
+	    n|N|*)
+		return 1;;
+	esac
+    fi
+
+    echo "${PKG_NAME}:"
+    echo "	build dir     = ${PKG_BUILD_DIR}"
+    echo "	pkg dir       = ${PKG_DIR}"
+    echo "	feed makefile = ${PKG_SOURCE_VERSION}"
+    echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
+    echo "	package is at a different git commit in build compared to feed"
+    echo -n "	Should we update the feed and top project to reflect the new version ? [y/N]:"
+    read answer
+    echo ""
+
+    case $answer in
+	y|Y)
+	    return 0;;
+	*)
+	    echo ""
+	    return 1;;
+    esac
+}
+
+get_makefile_hash()
+{
+    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
+    then
+	name="$PKG_SOURCE_VERSION_FILE"
+    else
+	name=Makefile
+    fi
+    grep "PKG_SOURCE_VERSION:=" ${PKG_DIR}/${name} | sed -e "s/\(^PKG_SOURCE_VERSION:=\)\(.*\)/\2/"
+}
+
+insert_hash_in_feed_makefile()
+{
+    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
+    then
+	name="$PKG_SOURCE_VERSION_FILE"
+    else
+	name=Makefile
+    fi
+
+    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+
+    sed -i -e "s/\(^PKG_SOURCE_VERSION:=\).*/\1${git_last}/" ${PKG_DIR}/${name}
+    (cd ${PKG_DIR}; git add ${name})
+}
+
+
+# BUG: fix if only local branche name!
+branch_uptodate()
+{
+    # $1 git repo
+    # $2 if it exist dont abort do the pull
+    (cd $1
+     git remote update 2>&1 >/dev/null
+
+     LOCAL=$(git rev-parse @)
+     REMOTE=$(git rev-parse @{u})
+     BASE=$(git merge-base @ @{u})
+
+     if [ -z "$REMOTE" ]; then
+	 BRANCH=$(basename $(git symbolic-ref -q HEAD))
+	 echo "You need to setup a tracking branch for $BRANCH"
+	 exit 99
+     fi
+
+     if [ $LOCAL = $REMOTE ]; then
+	 return
+     elif [ $LOCAL = $BASE ]; then
+	 if [ -n "$2" ]
+	 then
+	     echo "Doing automatic pull on [ $1 ]"
+	     if git pull
+	     then
+		 return
+	     else
+		 echo "Something wrong with pull. aborting, repo at"
+		 echo "    [ $1 ]"
+		 exit 99
+	     fi
+	 else
+	     echo "Local repo behind remote:"
+	     echo "do git pull at repo"
+	     echo "    [ $1 ]"
+	     exit 99
+	 fi
+     elif [ $REMOTE = $BASE ]; then
+	 echo "Local repo ahead of remote. A push is needed"
+	 echo "Repo is at: $1"
+	 echo ""
+	 echo -n "Should we try a push ? [Y/n]:"
+	 read answer
+	 echo ""
+
+	 case $answer in
+	     n|N|q|Q)
+		 exit 99;;
+	     *)
+		 echo -e "${Yellow}"
+		 if ! git push origin HEAD
+		 then
+		     echo -e "${Color_Off}"
+		     exit 99
+		 fi
+		 echo -e "${Color_Off}Push done."
+		 ;;
+	 esac
+
+     else
+	 echo "Diverged. not sure what you did but there is no tracking branch. "
+	 echo "repo at [ $1 ]. fix it so that there is a tracking branch remote."
+	 echo "Often this is related to sombody having commited to the same branch"
+	 echo "on the server so a simple push wont work, try a 'git rebase'."
+	 exit 99
+     fi
+    )
+}
+
+on_a_branch()
+{
+    local repo=$1
+    local type=$2
+    (
+	cd $repo
+	name=$(git symbolic-ref -q HEAD)
+	if [ -z "$name" ]
+	then
+	    echo "git $type repo [ $repo ] is detached."
+
+	    branches=($(git branch -r --contains $(git rev-parse HEAD)))
+	    if [ 0 == ${#branches[@]} ]
+	    then
+		echo "It needs to be on a branch but git could not find any associated branch"
+		echo ""
+		echo "you need to make sure that the commit is not on a detached branch"
+		echo "and that the branch exist in the remote repo also. it can not be a local name"
+		echo "as it is about to get pushed so it can be part of system release"
+		exit 99
+	    fi
+
+	    echo "It needs to be on a branch. Please select one or quit if it is not in list."
+	    echo ""
+
+	    i=0
+	    for branch in ${branches[*]}
+	    do
+		echo "$i: $branch"
+		i=$((i + 1))
+	    done
+
+	    echo ""
+	    echo -n "Select what branch to checkout. Q/q or N/n to quit? "
+	    read answer
+
+	    case $answer in
+		q|Q|n|N)
+		    echo "Aborting!"
+		    exit 99;;
+	    esac
+
+	    echo -e "${Yellow}"
+	    pwd
+	    echo "git checkout ${branches[$answer]}"
+	    if ! git checkout -t ${branches[$answer]}
+	    then
+		local_branch=$(basename ${branches[$answer]})
+		if ! git checkout ${local_branch}
+		then
+		    echo -e "${Color_Off}"
+		    echo "update_git aborting! something was wrong changing to branch ${branches[$answer]}"
+		    echo "go to [ $repo ] and fix it."
+		    exit 99
+		fi
+	    fi
+	    echo -e "${Color_Off}"
+	fi
+    )
+}
+
+git_repos_uptodate()
+{
+    on_a_branch ${PKG_BUILD_DIR} package
+    on_a_branch ${PKG_DIR} feed
+    on_a_branch ${PWD} top
+    branch_uptodate ${PKG_BUILD_DIR}
+    branch_uptodate ${PKG_DIR} do_pull
+    branch_uptodate ${PWD} do_pull
+}
+
+get_feed_name()
+{
+
+    echo $1 |sed  -e "s|.*feeds/\([^/]*\).*|\1|"
+
+    # rest=$(dirname $1)
+    # base=$(basename $1)
+    # prev=$base
+
+    # while [ -n "$rest" ]
+    # do
+    # 	if [ "$base" == "feeds" ]
+    # 	then
+    # 	    echo "$prev"
+    # 	fi
+    # done
+}
+
+create_message()
+{
+    FORMAT="commit %H%n\
+Author: %aN <%aE>%n\
+Date: %ai%n\
+%n\
+%w(80,4,4)%s%n
+%b%n\
+%w()Base directory -> ${repo_PATH}/"
+    local FROM=${PKG_SOURCE_VERSION}
+    local TO=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
+
+    local commits=$(cd ${PKG_BUILD_DIR};git rev-list ${FROM}..${TO})
+
+    local feed=$(get_feed_name ${PKG_DIR})
+
+    echo "Update feed [ $feed ] package [ $PKG_NAME ]"
+    echo ""
+    echo "-------------------------------------------------------------------------------"
+    (cd ${PKG_BUILD_DIR}; git log --graph --oneline ${FROM}..${TO})
+    echo "-------------------------------------------------------------------------------"
+
+    for commit in $commits
+    do
+	(cd ${PKG_BUILD_DIR}; git show --stat --pretty=format:"$FORMAT"  $commit)
+	echo "-------------------------------------------------------------------------------"
+    done
+}
+
+edit_file()
+{
+    echo -en "${Red}"
+    echo "Here is the commit message we are going to use!"
+    echo "-------------------------------------------------------------------------------"
+    echo -en "${Color_Off}"
+    cat $1
+    echo -en "${Red}"
+    echo "-------------------------------------------------------------------------------"
+    echo -en "${Color_Off}"
+
+    echo -n "Do you want to edit the message [y/N]? "
+    read answer
+
+    case $answer in
+	y|Y)
+	       $EDITOR $1;;
+    esac
+}
+
+
+commit_feed()
+{
+    template=$(readlink -f $1)
+    edit_file $template
+
+    echo -e "${Yellow}"
+    (
+	cd ${PKG_DIR}
+	if git commit -F $template
+	then
+	    if git push origin HEAD
+	    then
+		echo -e "${Color_Off} Feed Updated!"
+		return
+	    else
+		echo -e "${Color_Off}"
+		echo "something wrong push feed git ${PKG_DIR}"
+		exit 99
+	    fi
+	else
+	    echo -e "${Color_Off}"
+	    echo "something wrong committing to feed git ${PKG_DIR}"
+	    exit 99
+	fi
+    )
+}
+
+commit_feeds_config()
+{
+    template=$(readlink -f $1)
+    edit_file $template
+
+    echo -e "${Yellow}"
+    if git commit -F $template
+    then
+	if git push origin HEAD
+	then
+	    echo -e "${Color_Off}Feeds.conf updated!"
+	    return
+	else
+	    echo -e "${Color_Off}"
+	    echo "something wrong push change to feeds.conf"
+	    echo "try \"git remote update ; git stash ;git rebase; git push;git stash pop\""
+	    exit 99
+	fi
+    else
+	echo -e "${Color_Off}"
+	echo "something wrong committing to feed git"
+	exit 99
+    fi
+}
+
+insert_hash_in_feeds_config()
+{
+    local feed=$(get_feed_name ${PKG_DIR})
+    local TO=$(cd ${PKG_DIR}; git rev-parse HEAD)
+
+    sed -i feeds.conf -e "/${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    git add feeds.conf
+}
+
+check_packages()
+{
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+    echo "Now checking if any changes has been done to the packages."
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+
+    # First scan all files in build dir for packages that have .git directories.
+    all_pkgs=$(find build_dir/ -name ".git")
+
+    for pkg in `echo "$all_pkgs"`
+    do
+	pkg=$(dirname $pkg)
+
+	# check if the git in build is at same commit id as the feed makefile points out
+	if [ -e ${pkg}/.git_update ]
+	then
+	    source ${pkg}/.git_update
+	fi
+
+#	print_git_update
+
+	if [ -n "${PKG_NAME}" ]
+	then
+	    if ! is_git_same
+	    then
+		if update_this_pkg
+		then
+		    #  print_git_update
+		    git_repos_uptodate
+		    insert_hash_in_feed_makefile
+		    create_message >tmp/msg
+		    commit_feed tmp/msg
+		    insert_hash_in_feeds_config
+		    commit_feeds_config tmp/msg
+		fi
+	    fi
+	fi
+    done
+}
+
+# now handle the target git. we have only one
+
+
+feeds_hash()
+{
+    grep -v "^#" feeds.conf | grep " $1" | sed -e "s/.*[;^]\(.*\)/\1/"
+}
+
+insert_feed_hash_in_feeds_config()
+{
+    local feed=$1
+    local TO=$(cd feeds/${feed}; git rev-parse HEAD)
+
+    sed -i feeds.conf -e "/ ${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
+    git add feeds.conf
+}
+
+create_feed_message()
+{
+    local feed=$1
+    local FROM=$2
+    local TO=$3
+
+    local FORMAT="commit %H%n\
+Author: %aN <%aE>%n\
+Date: %ai%n\
+%n\
+%w(80,4,4)%s%n
+%b%n\
+%w()Base directory -> feeds/$feed/"
+
+
+    local commits=$(cd feeds/$feed;git rev-list ${FROM}..${TO})
+
+    echo "Update feed [ $feed ]"
+    echo ""
+    echo "-------------------------------------------------------------------------------"
+    (cd feeds/$feed; git log --graph --oneline ${FROM}..${TO})
+    echo "-------------------------------------------------------------------------------"
+
+    for commit in $commits
+    do
+	(cd feeds/$feed; git show --stat --pretty=format:"$FORMAT"  $commit)
+	echo "-------------------------------------------------------------------------------"
+    done
+}
+
+
+
+
+check_feeds()
+{
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+    echo "Now checking if any changes has been done to the feeds."
+    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
+
+    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
+    for feed in `echo $feeds`
+    do
+	feed_hash=$(feeds_hash $feed)
+	in_git=$(cd feeds/$feed; git rev-parse HEAD)
+
+	if [ "$feed_hash" != "$in_git" ]
+	then
+
+	    name=$(cd feeds/$feed;git symbolic-ref -q HEAD)
+	    if [ -z "$name" ]
+	    then
+		echo "Feed feeds/${feed} is at a git commit which is different from feeds.conf"
+		on_a_branch feeds/${feed} feed
+
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
+		fi
+	    fi
+
+	    LOCAL=$(cd feeds/$feed;git rev-parse @)
+	    REMOTE=$(cd feeds/$feed;git rev-parse @{u})
+	    BASE=$(cd feeds/$feed;git merge-base @ @{u})
+
+	    # if we are behind the remote automatically do a pull
+	    if [ $LOCAL = $BASE ]; then
+		(cd feeds/$feed ; git pull 1>/dev/null)
+
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
+		fi
+	    fi
+
+	    echo "Feed feeds/${feed} is at different commit than what is in feeds.conf"
+	    echo -n "Should we update feeds.conf to reflect the new version ? [y/N]:"
+	    read answer
+
+	    case $answer in
+		n|N)
+		    continue;;
+	    esac
+	    branch_uptodate feeds/${feed}
+	    create_feed_message ${feed} $feed_hash $in_git  >tmp/msg
+	    insert_feed_hash_in_feeds_config ${feed}
+	    commit_feeds_config tmp/msg
+	fi
+    done
+}
+
+feeds_at_top()
+{
+    git remote update 2>/dev/null 1>/dev/null
+    LOCAL=$(git rev-parse @)
+    REMOTE=$(git rev-parse @{u})
+
+    if [ $LOCAL = $REMOTE ]
+    then
+	return
+    fi
+
+    local_name=$(git rev-parse --abbrev-ref @ )
+    remote_name=$(git rev-parse --abbrev-ref @{u} )
+    
+    echo "Top repo local branch \"$local_name\" is not at same point as remote \"$remote_name\""
+    echo "This update script will update the feeds.conf file and for that to work it needs to"
+    echo "be up to date with the remote."
+    echo ""
+    echo "please run:"
+    echo "  git pull"
+    echo "  ./iop feeds_update"
+    echo ""
+    echo "do not forget the bootstrap. but do not run make it can delete your package in build"
+    exit 0
+}
+
+
+# Exported interface
+function update_package {
+
+    Color_Off='\033[0m'       # Text Reset
+
+    # Regular Colors
+    Black='\033[0;30m'        # Black
+    Red='\033[0;31m'          # Red
+    Green='\033[0;32m'        # Green
+    Yellow='\033[0;33m'       # Yellow
+    Blue='\033[0;34m'         # Blue
+    Purple='\033[0;35m'       # Purple
+    Cyan='\033[0;36m'         # Cyan
+    White='\033[0;37m'        # White
+
+    while getopts "v:h" opt; do
+	case $opt in
+	    v)
+		verbose=$OPTARG
+		;;
+	    h)
+		echo "some help! No options yet"
+		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -z "$EDITOR" ]
+    then
+	if [ -f /usr/bin/vi ]; then
+	    EDITOR=vi
+	else
+	    echo "env variable EDITOR needs to be set"
+	    exit 1
+	fi
+    fi
+
+
+    # allow subshells to abort the whole program by exiting with "exit 99"
+    set -E
+    trap '[ "$?" -ne 99 ] || exit 99' ERR
+
+    feeds_at_top
+    check_packages
+    check_feeds
+}
+
+register_command "update_package" "Publish changes to packages and feeds"

iup/Makefile

@@ -17,7 +17,7 @@ define Package/iup
   SECTION:=net
   CATEGORY:=Network
   TITLE:=iup client
-  DEPENDS:=+libuci  +uci +busybox
+  DEPENDS:=+libuci +uci +busybox
 endef
 
 define Package/iup/description

iup/files/etc/init.d/iup

@@ -13,6 +13,23 @@ include /lib/network
 CRONPATH="/etc/crontabs/root"
 RANGE=60
 
+management_interfaces() {
+	local DHCP_IFACES=""
+
+	is_notbridged_dhcp() {
+		local config="$1"
+		local proto="$(uci -q get network.$config.proto)"
+		local typ="$(uci -q get network.$config.type)"
+		if [ "$proto" == "dhcp" -a "$typ" != "bridge" ]; then
+			DHCP_IFACES="$DHCP_IFACES $config"
+		fi
+	}
+
+	config_load network
+	config_foreach is_notbridged_dhcp interface
+	echo $DHCP_IFACES
+}
+
 init_iup() {
 	local interval
 	local starttime
@@ -31,34 +48,38 @@ init_iup() {
 	config_get starttime  polling  starttime
 
 	### Ask for IUP related DHCP options only if IUP is enabled ###
-	local enabled
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.wan.reqopts)"
-	local proto="$(uci -q get network.wan.proto)"
-	local iupopts="66 67 128 224"
-	local ropt iopt
-	config_get enabled iup enabled "on"
-	for ropt in $reqopts; do
-		case $ropt in
-			66|67|128|224) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $iupopts"
-	for ropt in $reqopts; do
-		case $ropt in
-			66|67|128|224) [ $enabled == "on" ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
+	new_reqopts() {
+		local net=$1
+		local enabled
+		local newreqopts=
+		local baseopts=
+		local reqopts="$(uci -q get network.$net.reqopts)"
+		local iupopts="66 67 128 224"
+		local ropt iopt
+		config_get enabled iup enabled "on"
+		for ropt in $reqopts; do
+			case $ropt in
+				66|67|128|224) ;;
+				*) baseopts="$baseopts $ropt" ;;
+			esac
+		done
+		ropt=""
+		reqopts="$baseopts $iupopts"
+		for ropt in $reqopts; do
+			case $ropt in
+				66|67|128|224) [ $enabled == "on" ] && newreqopts="$newreqopts $ropt" ;;
+				*) newreqopts="$newreqopts $ropt" ;;
+			esac
+		done
+
 		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		uci -q set network.wan.reqopts="$newreqopts"
-		uci commit network
-		ubus call network reload
-	fi
+		echo "$newreqopts"
+	}
+	for net in $(management_interfaces); do
+		uci -q set network.$net.reqopts="$(new_reqopts $net)"
+	done
+	uci commit network
+	ubus call network reload
 	#################################################################
 
 	if [ $interval == "weekly" ]; then

iup/files/sbin/iup

@@ -1,6 +1,9 @@
 #!/bin/sh
+
 echo $$ > /var/run/iup.pid
+
 . /lib/functions.sh
+. /lib/functions/network.sh
 . /usr/share/libubox/jshn.sh
 
 include /lib/upgrade
@@ -52,8 +55,8 @@ get_packages()
 	local pack
 	pack=$(grep -w 'package' $1)
 	pack=${pack//package/}
-	pack=${pack//[\'|\"]/}
-	echo $pack
+	#pack=${pack//[\'|\"]/}
+	echo $pack | tr -d '\"' | tr -d "'"
 }
 
 reload ()
@@ -231,10 +234,141 @@ handle_Downloaded_file()
 	fi
 }
 
-###main
+# function: change_to_vlan
+# arg 1 = vlan id
+# arg 2 = vlan priority
+# arg 3 = $INTERFACE
+change_to_vlan() {
+	# local variables.
+	local name="vlan$1"	# construct name = vlan + vlanid.
+	local base_dev		# varible holding device name of wan port.
+	local wan_if		# variable holding wan interfaces.
+	local new_wan_if	#
+
+	# extract device name.
+	network_get_device base_dev $3
+
+	# bring down old interface/device.
+	ifdown "${base_dev}"
+	logger -t dhcp_opt132 "bringing down old if: ${base_dev}"
+
+	# extract base name of device.
+	base_dev=$(echo ${base_dev} | cut -d. -f1)
+
+	# add "VLAN interface" to the "end of the file".
+	uci add layer2_interface_vlan vlan_interface
+	uci set layer2_interface_vlan.@vlan_interface[-1].name=${name}
+	uci set layer2_interface_vlan.@vlan_interface[-1].vlan8021q=${1}
+	uci set layer2_interface_vlan.@vlan_interface[-1].vlan8021p=${2}
+	uci set layer2_interface_vlan.@vlan_interface[-1].ifname="${base_dev}.${1}"
+	uci set layer2_interface_vlan.@vlan_interface[-1].baseifname=${base_dev}
+	# and commit the change.
+	uci commit layer2_interface_vlan
+	logger -t dhcp_opt132 "committed update to file layer2_interface_vlan"
+
+	# reload configuration files.
+	/etc/init.d/layer2_interface_vlan reload
+	logger -t dhcp_opt132 "reload layer2_interface_vlan config"
+
+	# replace old interface (like eth0.1 with new eth0.101).
+	wan_if=$(uci get network.$3.ifname)
+	logger -t dhcp_opt132 "old network.${3}.ifname: $wan_if"
+
+	# loop through the string, remove any word close to "base_dev".
+	for word in ${wan_if}; do
+	#echo $word
+	case $word in
+		${base_dev}*) # don't add if.
+		;;
+		*)	new_wan_if=${word}' '${new_wan_if}  # add if.
+			#new_wan_if+=" ${word}"  # probably not working in ash.
+		;;
+	esac
+	done
+	# append new interface.
+	new_wan_if=${new_wan_if}${base_dev}.${1}
+	uci set network.wan.ifname="${new_wan_if}"
+	# and commit the change.
+	uci commit network
+	logger -t dhcp_opt132 "committed update to file network: ifname=${new_wan_if}"
+
+	# reboot into new if configuration.
+	reboot
+}
+
+handle_option224()
+{
+	if [ -z "$1" ] ; then
+		echo "No argument"
+		return 1
+	fi
+
+	if [ $(echo $1|grep -o "," | wc -l) -eq 0 ] ; then
+		url=$1
+	else
+		url=$(echo $1|cut -d',' -f1)
+		a=$(echo $1|cut -d',' -f2)
+		b=$(echo $1|cut -d',' -f3)
+		c=$(echo $1|cut -d',' -f4)
+	fi
+
+	echo "url" $url
+	echo "a" $a
+	echo "b" $b
+	echo "c" $c
+
+	currdate=$(date +"%Y-%m-%d")
+
+	active=0
+	if [ -z $a ] ; then
+		active=1
+	elif [ $a ] && [ $b ] && [ $a -lt 25 ] ; then
+		#Time
+		begin=$(date +%s -d"$currdate $a")
+		now=$(date +%s)
+		end=$((begin+3600*$b))
+		if [ $now -gt $begin ] && [ $now -lt $end ] ; then
+			active=1
+		fi
+	elif [ $a ] && [ $b ] && [ $c ] && [ $a -gt 25 ]  ; then
+		#Date
+		y=$(echo $a| cut -c1-4)
+		m=$(echo $a| cut -c5-6)
+		d=$(echo $a| cut -c7-8)
+		begin=$(date +%s -d"$y-$m-$d $b")
+		now=$(date +%s)
+		end=$((begin+3600*$c))
+		if [ $now -gt $begin ] && [ $now -lt $end ] ; then
+			active=1
+		fi
+	else
+		echo "Bad format"
+		return 1
+	fi
+
+	softwareminuspath=${url##*/}
+
+	if [ $url ] && [ $active -eq 1 ]; then
+		echo "Software version to download $softwareminuspath"
+		local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
+		json_load "$sysinfo"
+		json_get_var firmware firmware
+		local firmware_new=${softwareminuspath%.*}	# remove extension (.w, .y or .y2) from filename
+		if [ "$firmware_new" != "$firmware" ] ; then
+			echo "Image found $url will start flashing"
+			wait_for_dns $url
+			/sbin/sysupgrade -v $url &
+			return 1
+		else
+			echo "Will not update software, already up to date"
+			return 0
+		fi
+	fi
+}
+
+### MAIN ###
 while [ -n "$1" ]; do
 	case "$1" in
-
 		-v) export VERBOSE="$(($VERBOSE + 1))";;
 		-q) export VERBOSE="$(($VERBOSE - 1))";;
 		-*)
@@ -246,15 +380,65 @@ while [ -n "$1" ]; do
 	shift;
 done
 
+# Process IUP related DHCP options #
+if [ -n "$1" ]; then
+	local privopt224 vendorspecinf httpurl128
+	local tftp bootfile vlanid vlanpriority interface
+
+	json_load "$1"
+	json_get_var interface interface
+	json_get_var privopt224 privopt224
+	json_get_var vendorspecinf vendorspecinf
+	json_get_var httpurl128 httpurl128
+	json_get_var tftp tftp
+	json_get_var bootfile bootfile
+	json_get_var vlanid vlanid
+	json_get_var vlanpriority vlanpriority
+
+	if [ $privopt224 ]; then
+		echo "Option224 recived " $privopt224 > /dev/console
+		handle_option224 $privopt224
+		[ $? -eq 1 ] && exit
+	fi
+
+	if [ $vendorspecinf ]; then
+		url=${vendorspecinf%%,*}; rest=${vendorspecinf#*,}
+		provisioningcode=${rest%%,*};
+		uci_set_state provisioning iup url "$url"
+		uci_set_state provisioning iup provisioningcode "$provisioningcode"
+	elif [ $httpurl128 ]; then
+		uci_set_state provisioning iup urliup "$httpurl128"
+	elif [ $tftp ]; then
+		if [ ${bootfile:0:1} == '/' ]; then
+			uci_set_state provisioning iup urliup "tftp://$tftp$bootfile"
+		else
+			uci_set_state provisioning iup urliup "tftp://$tftp/$bootfile"
+		fi
+	fi
+
+	# if we get vlanid and maybe vlanpriority, configure for that.
+	if [ -n "$vlanid" -a -n "$vlanpriority" ]; then
+		logger -t dhcp_opt132 "vlanid: ${vlanid}, vlanpriority: ${vlanpriority}"
+		change_to_vlan ${vlanid} ${vlanpriority} ${interface}
+	elif [ -n "$vlanid" ]; then
+		logger -t dhcp_opt132 "vlanid: ${vlanid}"
+		change_to_vlan ${vlanid} 0 ${interface}
+	else
+		logger -t dhcp_opt132 "no vlanid given"
+	fi
+fi
+
 local iupurl
 local configurl
 local software
 local sofwareminuspath
+
 config_load provisioning
 #check if iup should be used or if its overridden by /etc/config
 config_get configurl configserver	url
 config_get reboot configserver reboot
 config_get iupurl iup	urliup
+
 if [ $configurl ]; then
 	handle_provisioning configserver "0"
 elif [ $iupurl ]; then
@@ -263,6 +447,7 @@ else
 	v "No Provisioning Server Found"
 	exit
 fi
+
 config_load provisioning
 config_foreach handle_provisioning subconfig "0"
 config_get software uppgradeserver url
@@ -295,4 +480,5 @@ if [ "$reboot" == "on" ]; then
 	v "Reboot Signaled"
 	/sbin/reboot
 fi
+
 rm -rf /var/run/iup.pid

iup/files/sbin/iup224

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-
-if [ -z $1 ] ; then
-	echo "No argument"
-	exit 1
-fi 
-
-if [ $(echo $1|grep -o "," | wc -l) -eq 0 ] ; then
-	url=$1
-else
-	url=$(echo $1|cut -d',' -f1)
-	a=$(echo $1|cut -d',' -f2)
-	b=$(echo $1|cut -d',' -f3)
-	c=$(echo $1|cut -d',' -f4)
-fi
-
-echo "url" $url
-echo "a" $a
-echo "b" $b
-echo "c" $c
-
-currdate=$(date +"%Y-%m-%d")
-
-active=0
-if [ -z $a ] ; then
-	active=1
-elif [ $a ] && [ $b ] && [ $a -lt 25 ] ; then
-	#Time
-	begin=$(date +%s -d"$currdate $a")
-	now=$(date +%s)
-	end=$((begin+3600*$b))
-	if [ $now -gt $begin ] && [ $now -lt $end ] ; then
-		active=1 
-	fi
-elif [ $a ] && [ $b ] && [ $c ] && [ $a -gt 25 ]  ; then
-	#Date
-	y=$(echo $a| cut -c1-4)
-	m=$(echo $a| cut -c5-6)
-	d=$(echo $a| cut -c7-8)
-	begin=$(date +%s -d"$y-$m-$d $b")
-	now=$(date +%s)
-	end=$((begin+3600*$c))
-	if [ $now -gt $begin ] && [ $now -lt $end ] ; then
-		active=1 
-	fi
-else
-	echo "Bad format"
-	exit 1
-fi
-
-sofwareminuspath=${url##*/}
-
-if [ $url ] && [ $active -eq 1 ]; then
-	echo "Software version to download $sofwareminuspath"	
-	local sysinfo=$(ubus call router quest "{ \"info\": \"system\" }")
-	json_load "$sysinfo"
-	json_get_var firmware firmware
-	json_get_var filesystem filesystem                                  
-        if [ "$filesystem" == "JFFS2" ] ; then                               
-                firmware=$firmware.w                                                                                                           
-        else                                                                 
-                firmware=$firmware.y                                         
-        fi     
-	if [ "$sofwareminuspath" == "${sofwareminuspath/$firmware/}" ] ; then
-		echo "Image found $url will start flashing"
-		/sbin/sysupgrade -v $url
-	else
-		echo "Will not update software, already up to date"
-	fi
-fi
-
-
-

layer2interface/broadcom/etc/init.d/layer2_interface_adsl

@@ -99,9 +99,10 @@ atm_inf_conf() {
 
 		checkxtmlist $atmtype $pcr $scr $mbs
 		ret="$?"
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encaps 0 $ret $ret
-		xtmctl operate conn --addq 1.$vpi.$vci 0 wrr 1
-		xtmctl operate conn --addq 1.$vpi.$vci 7 wrr 1 # fixes pppoe disconnect issue
+		xtmctl operate conn --add 1.$vpi.$vci aal5 $encaps 0 1 $ret
+		xtmctl operate conn --addq 1.$vpi.$vci 0 wrr 1 # low  priority queue
+		xtmctl operate conn --addq 1.$vpi.$vci 1 wrr 1 # mid  priority queue upstream ACK's and ping from LAN will use this queue
+		xtmctl operate conn --addq 1.$vpi.$vci 7 wrr 1 # high priority queue, internal traffic dhcp igmp dns and icmp
 		xtmctl operate conn --createnetdev 1.$vpi.$vci ${ifname%%.*}
 		xtmctl operate intf --state 1 enable
 		

layer2interface/broadcom/etc/uci-defaults/20-layer2-config-generate

@@ -0,0 +1,114 @@
+#!/bin/sh
+
+local hasEthWan="1"
+local hasAdsl="$(db -q get hw.board.hasAdsl)"
+local hasVdsl="$(db -q get hw.board.hasVdsl)"
+
+local LANPORTS="$(db -q get hw.board.ethernetLanPorts)"
+local WANPORTS=""
+
+# populate layer2_interface_ethernet #
+if [ "$hasEthWan" == "1" ]; then
+	local wanEthernetPort="$(db -q get hw.board.ethernetWanPort)"
+	wanEthernetPort="${wanEthernetPort:-eth0}"
+	if [ ! -f /etc/config/layer2_interface_ethernet -o -z "$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_ethernet <<EOF
+config ethernet_interface 'Wan'
+	option name 'WAN'
+	option baseifname '${wanEthernetPort}'
+	option ifname '${wanEthernetPort}.1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_ethernet.@ethernet_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasEthWan" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_ethernet
+fi
+
+# populate layer2_interface #
+if [ "$hasAdsl" == "1" ]; then
+	if [ ! -f /etc/config/layer2_interface -o -z "$(uci -q get layer2_interface.capabilities)" ]; then
+		cat > /etc/config/layer2_interface <<EOF
+config dsltype 'vdsl'
+	option 'enabled' 'on'
+
+config dsltype 'adsl'
+	option 'enabled' 'on'
+
+config dslsettings 'capabilities'
+	option 'GDmt' 'Enabled'
+	option 'Glite' 'Enabled'
+	option 'T1413' 'Enabled'
+	option 'ADSL2' 'Enabled'
+	option 'AnnexL' 'Enabled'
+	option 'ADSL2plus' 'Enabled'
+	option 'VDSL2' 'Enabled'
+	option '8a' 'Enabled'
+	option '8b' 'Enabled'
+	option '8c' 'Enabled'
+	option '8d' 'Enabled'
+	option '12a' 'Enabled'
+	option '12b' 'Enabled'
+	option '17a' 'Enabled'
+	option '30a' 'Enabled'
+	option 'US0' 'on'
+	option 'bitswap' 'on'
+	option 'sra' 'on'
+EOF
+	fi
+elif [ "$hasAdsl" == "0" -a "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface
+fi
+
+# populate layer2_interface_adsl #
+if [ "$hasAdsl" == "1" ]; then
+	local wanAdslPort=$(db -q get hw.board.adslWanPort)
+	wanAdslPort="${wanAdslPort:-atm0}"
+	if [ ! -f /etc/config/layer2_interface_adsl -o -z "$(uci -q get layer2_interface_adsl.@atm_bridge[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_adsl <<EOF
+config atm_bridge
+	option 'link_type' 'EoA'
+	option 'encapseoa' 'llcsnap_eth'
+	option 'unit' '0'
+	option 'ifname' '${wanAdslPort}.1'
+	option 'baseifname' '${wanAdslPort}'
+	option 'vpi' '8'
+	option 'vci' '35'
+	option 'name' 'DSL8_35'
+	option 'atmtype' 'ubr'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_adsl.@atm_bridge[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasAdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_adsl
+fi
+
+# populate layer2_interface_vdsl #
+if [ "$hasVdsl" == "1" ]; then
+	local wanVdslPort=$(db -q get hw.board.vdslWanPort)
+	wanVdslPort="${wanVdslPort:-ptm0}"
+	if [ ! -f /etc/config/layer2_interface_vdsl -o -z "$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)" ]; then
+		cat > /etc/config/layer2_interface_vdsl <<EOF
+config vdsl_interface
+	option 'unit' '0'
+	option 'ifname' '${wanVdslPort}.1'
+	option 'baseifname' '${wanVdslPort}'
+	option 'name' 'VDSL2'
+	option 'dslat' '1'
+	option 'ptmprio' '1'
+	option 'ipqos' '1'
+EOF
+	fi
+	local ifname="$(uci -q get layer2_interface_vdsl.@vdsl_interface[0].ifname)"
+	[ -n "$WANPORTS" ] && WANPORTS="$WANPORTS $ifname" || WANPORTS="$ifname"
+elif [ "$hasVdsl" == "0" ]; then
+	echo "" > /etc/config/layer2_interface_vdsl
+fi
+
+# populate network config ifnames #
+uci -q get network.lan.ifname >/dev/null || uci -q set network.lan.ifname="$LANPORTS"
+uci -q get network.wan.ifname >/dev/null || uci -q set network.wan.ifname="$WANPORTS"
+uci commit network
+
+sync

libcgroup/Makefile

@@ -0,0 +1,105 @@
+#
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libcgroup
+PKG_VERSION:=0.41
+PKG_RELEASE:=1
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=COPYING
+
+PKG_SOURCE_VERSION:=2186c97f60df7efe86ddadd5e3d9d36dd4923b98
+
+PKG_SOURCE_URL:=git://git.code.sf.net/p/libcg/libcg
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)+git$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+#PKG_BUILD_PARALLEL:=1
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libcgroup
+  SECTION:=libs
+  CATEGORY:=Libraries
+  DEPENDS:=+libpthread
+  TITLE:=Control group configuration library
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+define Package/libcgroup/description
+  Control groups, a new kernel feature in Linux 2.6.24 provides a file system
+  interface to manipulate and control the details on task grouping including
+  creation of new task groups (control groups), permission handling and task
+  assignment.
+endef
+
+define Package/libcgroup-daemon
+  SECTION:=base
+  CATEGORY:=Base system
+  DEPENDS:=+libcgroup +librt
+  TITLE:=Control group management daemon
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+define Package/libcgroup-utils
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libcgroup
+  TITLE:=Control group configuration utilities
+  URL:=https://sourceforge.net/p/libcg/
+endef
+
+#define Package/libcgroup/conffiles
+#	/etc/config/cgroups
+#endef
+
+CONFIGURE_ARGS += \
+		--disable-bindings \
+		--disable-pam \
+		--enable-static \
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/libcgroup
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/include/libcgroup/*.h $(1)/usr/include/libcgroup/
+
+	$(INSTALL_DIR) $(1)/usr/lib $(1)/usr/lib/pkgconfig
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcgroup.* $(1)/usr/lib/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/libcgroup.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libcgroup/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcgroup.so* $(1)/usr/lib/
+endef
+
+define Package/libcgroup-daemon/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/* $(1)/usr/sbin
+
+	# move to its own package?
+	$(INSTALL_DIR) $(1)/etc/config $(1)/etc/init.d
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+endef
+
+define Package/libcgroup-utils/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin
+endef
+
+$(eval $(call BuildPackage,libcgroup))
+$(eval $(call BuildPackage,libcgroup-daemon))
+$(eval $(call BuildPackage,libcgroup-utils))

libcgroup/files/cgroups.config

@@ -0,0 +1,40 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap minidlna=3prt/normal
+

libcgroup/files/cgroups.init

@@ -0,0 +1,123 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+#PROCD_DEBUG=1
+NAME=cgrulesengd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+CGRULESCONF=/tmp/cgrules.conf
+CGCONFIGCONF=/tmp/cgconfig.conf
+
+
+cgroupinit_add_knob_val_to_list () {
+CG_KNOB_VAL_LIST="$CG_KNOB_VAL_LIST
+$1"
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir curr
+
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+	fi
+
+	echo -e "group $dir {" >> $CGCONFIGCONF
+
+	CG_KNOB_VAL_LIST=
+	config_list_foreach $cgrp option cgroupinit_add_knob_val_to_list
+	CG_KNOB_VAL_LIST=$(echo "$CG_KNOB_VAL_LIST" |sort)
+	curr="_none_"
+
+	for knob_val in $CG_KNOB_VAL_LIST ; do
+		local ctrlr knob val
+		
+		knob=$(echo $knob_val |awk -F= '{print $1}')
+		ctrlr=$(echo $knob |awk -F. '{print $1}')
+		val=$(echo $knob_val |awk -F= '{print $2}')
+
+		if [ "$curr" != "$ctrlr" ]; then
+			[ "$curr" == "_none_" ] || echo -e "\t}" >> $CGCONFIGCONF
+			curr=$ctrlr
+			echo -e "\t$curr {" >> $CGCONFIGCONF
+		fi
+
+		echo -e "\t\t$knob = \"$val\";" >> $CGCONFIGCONF
+	done
+
+	[ "$curr" == "_none_" ] || echo -e "\t}" >> $CGCONFIGCONF
+	echo -e "}\n" >> $CGCONFIGCONF
+}
+
+cgroupinit_add_to_rules () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo -e "*:$name\t*\t$grp" >> $CGRULESCONF
+}
+
+cgroupinit_generate_config () {
+	local enab defgrp
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	# mount here instead of in cgconfigparser to get all options right
+	# mounting without any controllers listed means mount all available
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	echo -n '' > $CGCONFIGCONF
+	config_foreach cgroupinit_create_group cgroup
+
+	echo -n '' > $CGRULESCONF
+	config_list_foreach procmap procmap cgroupinit_add_to_rules
+	echo -e "*\t*\t$defgrp" >> $CGRULESCONF
+
+	return 0
+}
+
+# cgrulesengd has hardcoded paths for configuration files
+# use symlinks to point to generated config files
+cgroupinit_cgrulesengd_fixup () {
+	[ -r /etc/cgrules.conf ] || ln -s $CGRULESCONF /etc/cgrules.conf
+	[ -r /etc/cgconfig.conf ] || ln -s $CGCONFIGCONF /etc/cgconfig.conf
+	[ -d /etc/cgconfig.d ] || mkdir /etc/cgconfig.d
+}
+
+start_service () {
+	cgroupinit_generate_config
+	[ $? -eq 0 ] || return
+
+	cgroupinit_cgrulesengd_fixup
+	/usr/sbin/cgconfigparser -l $CGCONFIGCONF || return
+
+	procd_open_instance
+	procd_set_param command /usr/sbin/cgrulesengd --nodaemon --syslog
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	/usr/sbin/cgclear
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

libstrophe/Config.in

@@ -0,0 +1,14 @@
+choice
+	depends on PACKAGE_libstrophe
+	prompt "Select XML library"
+	default libstrophe-expat
+
+config libstrophe-expat
+	bool "expat"
+	select PACKAGE_libexpat
+
+config libstrophe-libxml2
+	bool "libxml2"
+	select PACKAGE_libxml2
+
+endchoice

libstrophe/Makefile

@@ -0,0 +1,61 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libstrophe
+PKG_VERSION:=0.8.8
+PKG_RELEASE=1
+
+PKG_SOURCE_URL:=https://github.com/strophe/libstrophe/archive/
+PKG_SOURCE:=$(PKG_VERSION).tar.gz
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_libstrophe-libxml2 \
+	CONFIG_libstrophe-expat
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_libstrophe-libxml2),y)
+CONFIGURE_ARGS += \
+	--with-libxml2
+endif
+
+define Package/libstrophe
+	SECTION:=libs
+	CATEGORY:=Libraries
+	TITLE:=XMPP client library
+	URL:=http://strophe.im/libstrophe
+	DEPENDS:= +libopenssl +libstrophe-libxml2:libxml2 +libstrophe-expat:libexpat
+	MENU:=1
+endef
+
+define Package/libstrophe/description
+	A simple, lightweight C library for writing XMPP clients
+endef
+
+define Package/libstrophe/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/ $(1)/usr/
+
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libstrophe.{la,a,so*} $(1)/usr/lib/
+endef
+
+define Package/libstrophe/install
+	$(INSTALL_DIR) $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libstrophe.so.* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,libstrophe))

natalie-dect-h/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=natalie-dect-h
-PKG_VERSION:=12.26
+PKG_VERSION:=11.19
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://public.inteno.se:/natalie-dect-h
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=9e2236989ff58d0db897f938b6b07b535144e0e2
+PKG_SOURCE_VERSION:=c2139d05e3d082f1dcf58ce3f19306cb76fd0873
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk

natalie-dect/Config.in

@@ -0,0 +1,4 @@
+
+config NATALIE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

natalie-dect/Makefile

@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=natalie-dect
-PKG_VERSION:=12.26
+PKG_VERSION:=11.19
 
-PKG_SOURCE_VERSION:=2a0ea307853437932564f7af67026dc48c19fa42
+PKG_SOURCE_VERSION:=2015e8106c7d541dd038381c2845bd8462d74a30
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -18,7 +18,7 @@ PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=natalie-dect-open
 else
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=git@private.inteno.se:natalie-dect-12.26
+PKG_SOURCE_URL:=git@private.inteno.se:natalie-dect-11.19
 PKG_SOURCE_PROTO:=git
 endif
 
@@ -46,6 +46,10 @@ define Package/natalie-dect/description
 	Kernel dect driver
 endef
 
+define Package/natalie-dect/config
+	source "$(SOURCE)/Config.in"
+endef
+
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 define Build/Compile
 endef

netcheck/Makefile

@@ -18,7 +18,7 @@ TARGET_CFLAGS += $(FPIC) -std=gnu99
 
 define Package/netcheck
   CATEGORY:=Utilities
-  DEPENDS:=+libuci +libjson +questd
+  DEPENDS:=+libuci +libjson-c +questd
   TITLE:=netcheck utility
 endef
 

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=8be3060315f010fbf1bde723e0674e4a65fa9ccb
+PKG_SOURCE_VERSION:=71c89213516c735b6c12d0e8c17a5bd75333421c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se/peripheral_manager
 

peripheral_manager/files/etc/init.d/peripheral_manager

@@ -15,8 +15,9 @@ start_service() {
 }
 
 service_running() {
-	ubus -t 2 wait_for leds
+	ubus -t 2 wait_for led.status
 	ubus call led.status set '{"state":"ok"}'
+	ubus -t 2 wait_for button
 }
 
 stop() {

port-management/files/etc/init.d/port_management

@@ -12,14 +12,14 @@ check_for_config(){
 	if [ -s "/etc/config/ports" ]
 	then 
 		debug_print "file exists and has content" 
-		if uci -q show ports >/dev/null #are there any valid content then continue
+		if uci -q get ports.@ethport[0] >/dev/null #are there any valid content then continue
 		then 
 			return 0
 		else
 			rm -f /etc/config/ports
 		fi
 	fi
-	debug_print "file doesent exsists or is empty"
+	debug_print "ports config file doesn't exsist or is empty"
 	touch /etc/config/ports
 	local portnames="$(db get hw.board.ethernetPortNames)"
 	local portorder="$(db get hw.board.ethernetPortOrder)"

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=3.0.2
+PKG_VERSION:=3.1.8
 
-PKG_SOURCE_VERSION:=dd7371d62252de413d763c2cd7d1317e6e87394f
+PKG_SOURCE_VERSION:=4466c00f581968c4b2299d2464ffe283d906b758
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/questd
 
@@ -18,16 +18,21 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-LDFLAGS+= \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-	-Wl,-rpath-link=$(STAGING_DIR)/lib
-
-ifeq ($(CONFIG_PACKAGE_bcmkernel),y)
-BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+QUESTD_CLFAGS:=-DIOPSYS_BROADCOM
+KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+QUESTD_CLFAGS:=-DIOPSYS_BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+QUESTD_CLFAGS:=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
+QUESTD_CLFAGS:=-DIOPSYS_LANTIQ
 else
-BCMKERNEL_DIR:=$(BUILD_DIR)/bcmopen-consumer/bcm963xx
+$(info (UNEXPECTED CONFIG TARGET))
 endif
-export BCMKERNEL_DIR
+
+export KERNEL_DIR
+export QUESTD_CLFAGS
 
 define Package/questd
 	CATEGORY:=Utilities
@@ -43,10 +48,9 @@ endef
 define Package/questd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_DIR) $(1)/tmp
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ueventd $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uscriptd $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
 endef
 
 $(eval $(call BuildPackage,questd))

questd/files/etc/init.d/quest

@@ -16,17 +16,11 @@ start_service() {
 	procd_set_param command "/sbin/uscriptd"
 	procd_set_param respawn
 	procd_close_instance
-
-	procd_open_instance
-	procd_set_param command "/sbin/ueventd"
-	procd_set_param respawn
-	procd_close_instance
 }
 
 stop() {
 	service_stop /sbin/questd
 	service_stop /sbin/uscriptd
-	service_stop /sbin/ueventd
 }
 
 service_triggers()

questd/files/tmp/igmp_snooping

@@ -1,5 +0,0 @@
-igmp snooping 2  proxy 1  lan2lan-snooping 0/0, rate-limit 0pps, priority -1
-bridge device src-dev #tags lan-tci  wan-tci    group      mode RxGroup    source     reporter   timeout Index      ExcludPt
-br-lan eth5   eth2.1  00    0x0000   0xffffffff 0xe0027ffe EX   0xe0027ffe 0x00000000 0xc0a801f1 258     0x401e0001 -1
-br-lan eth5   eth2.1  00    0x0000   0xffffffff 0xefc3ffff EX   0xefc3ffff 0x00000000 0xc0a801f1 258     0x400e0001 -1
-br-lan eth5   eth2.1  00    0x0000   0xffffffff 0xefffffff EX   0xefffffff 0x00000000 0xc0a801f1 258     0x40070001 -1

samba3/Config.in

@@ -0,0 +1,23 @@
+config SAMBA3_CONFIG_DEBUG 
+	bool "Enable Logging for samba3"
+	depends on PACKAGE_samba3
+	default n
+	help
+		Enables debugging support (will make binaries *much* bigger)
+		Also increases MAX_DEBUG_LEVEL to get more messages (also increases binary sizes!)
+
+config SAMBA3_CONFIG_SMALLER
+	bool "Make samba3 even smaller"
+	depends on PACKAGE_samba3
+	default y
+	help
+		Removes support for ???
+		Saves about 18kB for smbd, about 16kB for nmbd and about 17kB for smbpasswd
+
+config SAMBA3_CONFIG_NO_PRINTING
+	bool "Remove shared printing support"
+	depends on PACKAGE_samba3
+	default y
+   	help
+		Removes shared printing support.
+		Saves about 18kB for smbd, about 15kB for nmbd and about 18kB for smbpasswd

samba3/Makefile

@@ -0,0 +1,146 @@
+#
+# Copyright (C) 2008-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=samba3
+PKG_VERSION:=3.0.37
+PKG_RELEASE:=1
+
+PKG_MD5SUM:=11ed2bfef4090bd5736b194b43f67289
+
+PKG_SOURCE_URL:=ftp://ftp.samba.org/pub/samba/old-versions/
+PKG_SOURCE:=samba-$(PKG_VERSION).tar.gz
+PKG_BUILD_DIR:=$(BUILD_DIR)/samba-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+#PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/samba3/Default
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=Filesystem
+  URL:=http://www.samba.org/
+endef
+
+define Package/samba3
+$(call Package/samba3/Default)
+  TITLE:=SMB server for file and printer sharing
+  DEPENDS:=+libpthread +libpopt $(ICONV_DEPENDS) +libattr
+endef
+
+define Package/samba3-nmbd
+$(call Package/samba3/Default)
+  TITLE:=NetBIOS name server
+  DEPENDS:=+samba3
+endef
+
+define Package/samba3-mountcifs
+$(call Package/samba3/Default)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Mount utility for samba shares
+endef
+
+define Package/samba3/description
+SMB server for file and printer sharing
+Also contains a SMB password utility (smbpasswd)
+
+Made small with patches taken from AVM GPL releases and freetz 
+endef
+
+define Package/samba3-nmbd/description
+NetBIOS name server
+
+Made small with patches taken from AVM GPL releases and freetz 
+endef
+
+define Package/cifsmount/description
+An user space helper utility for mounting remote CIFS shares.
+endef
+
+define Package/samba3/conffiles
+/etc/config/samba
+/etc/samba/smb.conf.template
+endef
+
+define Package/samba3/config
+	source "$(SOURCE)/Config.in"
+endef
+
+TARGET_CFLAGS+=$(if $(CONFIG_SAMBA3_CONFIG_DEBUG),-DSAMBA_DEBUG,-DMAX_DEBUG_LEVEL=2)
+TARGET_CFLAGS+=$(if $(CONFIG_SAMBA3_CONFIG_SMALLER),-DAVM_SMALLER)
+TARGET_CFLAGS+=$(if $(CONFIG_SAMBA3_CONFIG_NO_PRINTING),-DAVM_NO_PRINTING)
+CONFIGURE_PATH:=source
+CONFIGURE_ARGS+= \
+	$(if $(CONFIG_SAMBA3_CONFIG_DEBUG),--enable-debug) \
+	--without-krb5 \
+	--without-ads \
+	--without-ldap \
+	--enable-largefile \
+	--with-configdir=/etc/samba \
+	--with-libiconv=$(ICONV_PREFIX) \
+	--with-privatedir=/etc/samba
+
+# Make sure we tell the configure script that we support negative enum values and want to use setresuid
+CONFIGURE_VARS+= \
+	SMB_BUILD_CC_NEGATIVE_ENUM_VALUES=yes \
+	samba_cv_USE_SETEUID=no \
+	samba_cv_have_setresuid=yes \
+	samba_cv_USE_SETRESUID=yes \
+	samba_cv_HAVE_C99_VSNPRINTF=yes \
+	samba_cv_have_longlong=yes \
+	ac_cv_type_long_long=yes \
+
+MAKE_PATH=source
+MAKE_FLAGS += \
+	$(if $(CONFIG_SAMBA3_CONFIG_NO_PRINTING),OWRT_NO_PRINTING=1) \
+	$(if $(CONFIG_SAMBA3_CONFIG_SMALLER),OWRT_SMALLER=1)
+
+#define Build/Configure
+#	$(SH) pushd $(PKG_BUILD_DIR)/source && ./autogen.sh ; popd
+#	$(Build/Configure/Default)
+#endef
+
+define Build/Compile
+	# Ugly fix for parallel building (without this some generated files will be missing upon clean build)
+	$(call Build/Compile/Default, proto_exists)
+	$(call Build/Compile/Default, \
+		$(if $(CONFIG_PACKAGE_samba3),bin/smbd bin/smbpasswd) \
+		$(if $(CONFIG_PACKAGE_samba3-nmbd),bin/nmbd) \
+		$(if $(CONFIG_PACKAGE_samba3-mountcifs),bin/mount.cifs bin/umount.cifs) \
+	)
+endef
+
+define Package/samba3/install
+	$(INSTALL_DIR) $(1)/etc/{samba,init.d,config}
+	$(INSTALL_BIN) ./files/samba.init $(1)/etc/init.d/samba
+	$(INSTALL_DATA) ./files/samba.config $(1)/etc/config/samba
+	$(INSTALL_DATA) ./files/smb.conf.template $(1)/etc/samba/
+	touch $(1)/etc/samba/smbpasswd
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/source/bin/smbpasswd $(1)/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/source/bin/smbd $(1)/bin/
+endef
+
+define Package/samba3-nmbd/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+#	$(INSTALL_BIN) ./files/samba-nmbd.init $(1)/etc/init.d/samba-nmbd
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/source/bin/nmbd $(1)/bin/
+endef
+
+define Package/samba3-mountcifs/install
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/source/bin/mount.cifs $(1)/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/source/bin/umount.cifs $(1)/bin/
+endef
+
+$(eval $(call BuildPackage,samba3))
+$(eval $(call BuildPackage,samba3-nmbd))
+$(eval $(call BuildPackage,samba3-mountcifs))

samba3/files/config-lfs.h

@@ -0,0 +1,56 @@
+#undef HAVE_CREAT64
+#define HAVE_CREAT64 1
+
+#undef HAVE_FSEEKO64
+#define HAVE_FSEEKO64 1
+
+#undef HAVE_FSTAT64
+#define HAVE_FSTAT64 1
+
+#undef HAVE_FTELLO64
+#define HAVE_FTELLO64 1
+
+#undef HAVE_FTRUNCATE64
+#define HAVE_FTRUNCATE64 1
+
+#undef HAVE_LSEEK64
+#define HAVE_LSEEK64 1
+
+#undef HAVE_LSTAT64
+#define HAVE_LSTAT64 1
+
+#undef HAVE_OPEN64
+#define HAVE_OPEN64 1
+
+#undef HAVE_PREAD64
+#define HAVE_PREAD64 1
+
+#undef HAVE_PWRITE64
+#define HAVE_PWRITE64 1
+
+#undef HAVE_READDIR64
+#define HAVE_READDIR64 1
+
+#undef HAVE_STAT64
+#define HAVE_STAT64 1
+
+#undef HAVE_STRUCT_FLOCK64
+#define HAVE_STRUCT_FLOCK64 1
+
+#undef SIZEOF_LONG_LONG
+#define SIZEOF_LONG_LONG 8
+
+#undef SIZEOF_OFF_T
+#define SIZEOF_OFF_T 8
+
+#undef _FILE_OFFSET_BITS
+#define _FILE_OFFSET_BITS 64
+
+#undef _GNU_SOURCE
+#define _GNU_SOURCE 1
+
+#undef _LARGEFILE_SOURCE
+#define _LARGEFILE_SOURCE 1
+
+#undef _LARGEFILE64_SOURCE
+#define _LARGEFILE64_SOURCE 1

samba3/files/samba-nmbd.init

@@ -0,0 +1,12 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2011 OpenWrt.org
+
+START=61
+
+start() {
+	service_start /bin/nmbd -D
+}
+
+stop() {
+	service_stop /bin/nmbd
+}

samba3/files/samba-smbd.init

@@ -0,0 +1,81 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008-2011 OpenWrt.org
+
+START=60
+
+smb_header() {
+	local name
+	local workgroup
+	local description
+	local homes
+	local interface
+
+	config_get name $1 name
+	config_get workgroup $1 workgroup
+	config_get description $1 description
+	config_get homes $1 homes
+	config_get interface $1 interface "lan"
+
+	# resolve interfaces
+	local interfaces=$(
+		include /lib/network
+		scan_interfaces
+		local net ifname; for net in $interface; do
+			config_get ifname "$net" ifname "$net"
+			echo -n "$ifname "
+		done
+	)
+
+	[ -z "$name" ] && name=openwrt
+	[ -z "$workgroup" ] && workgroup=openwrt
+	[ -z "$description" ] && description=openwrt
+
+	mkdir -p /var/etc
+	cp /etc/samba/smb.conf.template /var/etc/smb.conf
+	[ -L /etc/samba/smb.conf ] || ln -nsf /var/etc/smb.conf /etc/samba/smb.conf
+	sed -i "s/|NAME|/$name/g" /var/etc/smb.conf
+	sed -i "s/|WORKGROUP|/$workgroup/g" /var/etc/smb.conf
+	sed -i "s/|DESCRIPTION|/$description/g" /var/etc/smb.conf
+	sed -i "s/|INTERFACES|/$interfaces/g" /var/etc/smb.conf
+	[ "$homes" == "1" ] && {
+		echo -e "\n[homes]\n\tcomment = Home Directories\n\tbrowseable = no\n\tread only = no\n\tcreate mode = 0750" >> /var/etc/smb.conf
+	}
+}
+
+smb_add_share() {
+	local name
+	local path
+	local users
+	local read_only
+	local guest_ok
+	local create_mask
+	local dir_mask
+
+	config_get name $1 name
+	config_get path $1 path
+	config_get users $1 users
+	config_get read_only $1 read_only
+	config_get guest_ok $1 guest_ok
+	config_get create_mask $1 create_mask
+	config_get dir_mask $1 dir_mask
+
+	[ -z "$name" -o -z "$path" ] && return
+
+	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
+}
+
+start() {
+	config_load samba
+	config_foreach smb_header samba
+	config_foreach smb_add_share sambashare
+	service_start /bin/smbd -D
+}
+
+stop() {
+	service_stop /bin/smbd
+}

samba3/files/samba.config

@@ -0,0 +1,7 @@
+config samba
+        option 'name'		'IntenoSMB'
+        option 'workgroup'	'IntenoSMB'
+        option 'description'	'IntenoSMB'
+        option 'homes'		'0'
+	option 'interface'	'lan'
+

samba3/files/samba.init

@@ -0,0 +1,168 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008-2012 OpenWrt.org
+
+START=60
+STOP=40
+USE_PROCD=1
+
+useradd()
+{
+	local user
+	local password
+	config_get user $1 user
+	config_get password $1 password
+	if ! $(grep -rq "^$user:" /etc/passwd) ; then
+		echo "adding user $user"
+		adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
+	else
+		tmp=$(grep -r "^$user:" /etc/passwd | cut -d":" -f5)
+		if $(echo $tmp | grep -rq "^samba") ; then
+			if [ "$tmp" != "samba,pass=$password" ] ; then
+				echo "change user $user"
+				deluser $user
+				adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
+			fi
+		else
+			echo "activating samba for system user $user"
+			smbpasswd $user $password
+		fi
+	fi
+}
+
+samba_user_exists()
+{
+	local user
+	config_get user $1 user
+	[ "$user" == "$2" ] && echo "1" && break
+}
+
+purgepasswd()
+{
+	for us in `grep -r "^.*:" /etc/samba/smbpasswd | cut -d":" -f1`; do
+		if [ -z "$(config_foreach samba_user_exists sambausers $us)" ] ; then
+			smbpasswd -del $us
+			grep -r "^$us:" /etc/passwd | cut -d":" -f5 | grep -rq "^samba" && deluser $us
+		fi
+	done
+
+	# delete left over samba users in case they were not in /etc/samba/smbpasswd
+	for us in `grep ":/mnt/" /etc/passwd | cut -d":" -f1`; do
+		deluser $us
+	done
+}
+
+smb_header() {
+	local interface
+	config_get interface $1 interface
+
+	# resolve interfaces
+	local interfaces=$(
+		. /lib/functions/network.sh
+
+		local net
+		for net in $interface; do
+			local device
+			network_get_device device "$net" && {
+				local subnet
+				network_get_subnet  subnet "$net" && echo -n "$subnet "
+				network_get_subnet6 subnet "$net" && echo -n "$subnet "
+			}
+
+			echo -n "${device:-$net} "
+		done
+	)
+
+	local name workgroup description charset
+	local hostname="$(uci_get system.@system[0].hostname)"
+
+	config_get name	$1 name	"${hostname:-OpenWrt}"
+	config_get workgroup   $1 workgroup   "${hostname:-OpenWrt}"
+	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
+	config_get charset     $1 charset     "UTF-8"
+
+	mkdir -p /var/etc
+	sed -e "s#|NAME|#$name#g" \
+	    -e "s#|WORKGROUP|#$workgroup#g" \
+	    -e "s#|DESCRIPTION|#$description#g" \
+	    -e "s#|INTERFACES|#$interfaces#g" \
+	    -e "s#|CHARSET|#$charset#g" \
+	    /etc/samba/smb.conf.template > /var/etc/smb.conf
+
+	local homes
+	config_get_bool homes $1 homes 0
+	[ $homes -gt 0 ] && {
+		cat <<EOT >> /var/etc/smb.conf
+
+[homes]
+	comment     = Home Directories
+	browsable   = no
+	read only   = no
+	create mode = 0750
+EOT
+	}
+
+	[ -L /etc/samba/smb.conf ] || $(rm -f /etc/samba/smb.conf; ln -nsf /var/etc/smb.conf /etc/samba/smb.conf)
+}
+
+smb_add_share() {
+	local name
+	local path
+	local users
+	local read_only
+	local guest_ok
+	local create_mask
+	local dir_mask
+	local browseable
+	local dirpath
+
+	config_get name $1 name
+	config_get path $1 path
+	config_get users $1 users
+	config_get read_only $1 read_only
+	config_get guest_ok $1 guest_ok
+	config_get create_mask $1 create_mask
+	config_get dir_mask $1 dir_mask
+	config_get browseable $1 browseable
+	config_get dirpath $1 dirpath
+	path="$path/$dirpath"
+
+	[ -z "$name" -o -z "$path" ] && return
+
+	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
+	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" >> /var/etc/smb.conf
+}
+
+start_service() {
+	config_load samba
+	purgepasswd
+	config_foreach useradd sambausers
+	config_foreach smb_header samba
+	config_foreach smb_add_share sambashare
+
+	procd_open_instance
+	procd_set_param command "/bin/smbd" -F
+	procd_close_instance
+
+	procd_open_instance
+	procd_set_param command "/bin/nmbd" -F
+	procd_close_instance
+}
+
+stop_service() {
+	service_stop /bin/smbd
+	service_stop /bin/nmbd
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger samba network
+}

samba3/files/smb.conf.template

@@ -0,0 +1,19 @@
+[global]
+	netbios name = |NAME| 
+	workgroup = |WORKGROUP|
+	server string = |DESCRIPTION|
+	syslog = 10
+	encrypt passwords = true
+	passdb backend = smbpasswd
+	obey pam restrictions = yes
+	socket options = TCP_NODELAY
+	unix charset = UTF-8
+	preferred master = yes
+	os level = 20
+	security = user
+	guest account = nobody
+	invalid users = root
+	smb passwd file = /etc/samba/smbpasswd
+        interfaces = |INTERFACES|
+        bind interfaces only = yes
+

samba3/patches/110-compile_fixes.patch

@@ -0,0 +1,48 @@
+Index: samba-3.0.37/source/popt/popt.c
+===================================================================
+--- samba-3.0.37.orig/source/popt/popt.c	2011-04-11 23:35:04.000000000 +0200
++++ samba-3.0.37/source/popt/popt.c	2011-04-11 23:35:10.000000000 +0200
+@@ -10,13 +10,14 @@
+ 
+ #include "system.h"
+ 
+-#if HAVE_FLOAT_H
++//#if HAVE_FLOAT_H
+ #include <float.h>
+-#endif
++//#endif
+ #include <math.h>
+ 
+ #include "findme.h"
+ #include "poptint.h"
++#include "../include/config.h"
+ 
+ #ifdef	MYDEBUG
+ /*@unchecked@*/
+@@ -388,7 +389,7 @@
+ 	sprintf(s, "%s/%s", con->execPath, item->argv[0]);
+ 	argv[argc] = s;
+     } else {
+-	argv[argc] = findProgramPath(item->argv[0]);
++	argv[argc] = ""/*findProgramPath(item->argv[0])*/;
+     }
+     if (argv[argc++] == NULL) return POPT_ERROR_NOARG;
+ 
+@@ -1246,4 +1247,3 @@
+     
+     return numargs;
+ }
+-/*@=boundswrite@*/
+Index: samba-3.0.37/source/modules/vfs_default.c
+===================================================================
+--- samba-3.0.37.orig/source/modules/vfs_default.c	2011-04-11 23:35:08.000000000 +0200
++++ samba-3.0.37/source/modules/vfs_default.c	2011-04-11 23:35:10.000000000 +0200
+@@ -977,7 +977,7 @@
+ 
+ 	START_PROFILE(syscall_linux_setlease);
+ 
+-#ifdef LINUX
++#if defined(LINUX) && defined(HAVE_KERNEL_OPLOCKS_LINUX)
+ 	/* first set the signal handler */
+ 	if(linux_set_lease_sighandler(fd) == -1)
+ 		return -1;