fluent-bit: add support for lua filter

this allows us to add custom records, for example, for converting
kernel monotonic timestamps to UTC format timestamps

bbfdm/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bbfdm
-PKG_VERSION:=1.16.6.2
+PKG_VERSION:=1.15.28
 
 USE_LOCAL:=0
 ifneq ($(USE_LOCAL),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=aa480554461c82e6f6f44ee6c23108d3e44fce21
+PKG_SOURCE_VERSION:=a20a15888b15864136ec40b15f221db2edbaf574
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

bbfdm/files/etc/bbfdm/critical_services.json

@@ -8,16 +8,13 @@
 			"ieee1905",
 			"mapcontroller",
 			"mosquitto",
-			"nginx",
-			"netmode"
+			"nginx"
 	],
 	"cwmp": [
 			"firewall",
 			"network",
 			"dhcp",
-			"mapcontroller",
 			"wireless",
-			"time",
-			"netmode"
+			"time"
 	]
 }

bbfdm/files/etc/ruleng/bbfdm.json

@@ -15,13 +15,9 @@
 		]
 	},
 	"dhcp_refresh": {
-		"if_operator": "OR",
 		"if" : [
 			{
 				"event": "host"
-			},
-			{
-				"event": "wifi.dataelements.Associated"
 			}
 		],
 		"then" : [

bridgemngr/Makefile

@@ -5,13 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bridgemngr
-PKG_VERSION:=1.0.18.2
+PKG_VERSION:=1.0.14
 
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
-PKG_SOURCE_VERSION:=71ed529be038392071b0399bcfe9d46e89d3cb46
+PKG_SOURCE_VERSION:=99bc3a3a0a2571917eda7085c21952f779fdb471
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

ddnsmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.12
+PKG_VERSION:=1.0.11
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=44af9a7b3fec3929f8554af9633a5b8068189b48
+PKG_SOURCE_VERSION:=9f2f4dabc71c4f405b1c5df576d20d793d299e94
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

decollector/Makefile

@@ -6,12 +6,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=decollector
-PKG_VERSION:=6.2.1.8
+PKG_VERSION:=6.2.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b7e294d7c610adfd80cf40a0628c189695dc5156
+PKG_SOURCE_VERSION:=a5c381b2855bd88f09dedb00f76040f1a4662079
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

dectmngr/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.7.10
+PKG_VERSION:=3.7.7
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1f851980a6ba616df54f79930225f8bcd563b711
+PKG_SOURCE_VERSION:=289a91b3e7f221f16c976efd147bd4b203420b41
 PKG_MIRROR_HASH:=skip
 endif
 

dectmngr/files/etc/init.d/dectmngr

@@ -57,53 +57,13 @@ get_dcx81_device() {
 			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
 			readonly device="/dev/${device_name_line##DEVNAME=}"
 			[ -c "$device" ] || return 1
-			printf "%s" "$(basename $device)"
+			printf "%s" "$device"
 			return 0
 		fi
 	done
 	return 1
 }
 
-check_dcx81_firmware() {
-	local dcx81_uart=$1
-	local fw_link="/lib/firmware/dcx81_firmware"
-	local fw_file
-
-	[ -L "$fw_link" ] || return
-
-	fw_file=$(readlink -f $fw_link)
-	[ -f "$fw_file" ] || return
-
-	# the symbolic link is not needed
-	rm -f $fw_link
-
-	eval $(/sbin/cmbs_tcx -comname "$dcx81_uart" -fw_version |grep DCX81_FW_Version)
-	[ -n "$DCX81_FW_Version" ] || return
-
-	if echo $(basename $fw_file) | grep -qi "$DCX81_FW_Version" ; then
-		logger -t "$PROG" "DCX81 running expected $DCX81_FW_Version"
-		return;
-	fi
-
-	logger -t "$PROG" "DCX81 firmware upgrading to $fw_file"
-	/sbin/cmbs_tcx -comname "$dcx81_uart" -fwu "$fw_file" 2>&1 >/dev/null &
-
-	echo -n "Updrading DCX81 firmware.." >/dev/console
-	local wait_time=0
-	while pidof cmbs_tcx >/dev/null && [ "$wait_time" -lt "200" ] ; do
-		sleep 5
-		wait_time=$(($wait_time + 5))
-		echo -n "." >/dev/console
-	done
-
-	if pidof cmbs_tcx >/dev/null ; then
-		killall -9 cmbs_tcx
-		logger -t "$PROG" "DCX81 firmware upgrade timeout"
-	else
-		logger -t "$PROG" "DCX81 firmware upgrade done"
-	fi
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
@@ -115,16 +75,14 @@ start_service() {
 		return 0
 	fi
 
+	opt_ext="-extensionShift $(get_extension_shift)"
+
 	local dcx81_uart_device
 	if ! dcx81_uart_device="$(get_dcx81_device)"; then
 		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device="ttyH0"
+		dcx81_uart_device=/dev/ttyH0
 	fi
 
-	check_dcx81_firmware $dcx81_uart_device
-
-	opt_ext="-extensionShift $(get_extension_shift)"
-
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
 
@@ -148,19 +106,21 @@ start_service() {
 
 	procd_open_instance
 
+	# dectmngr takes expects device without /dev
+	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
 	case "$log_dect_cmbs" in
 	none)
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
 		rm -f $LOG_PATH/*
 		;;
 	file)
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -log $LOG_PATH/dect-cmbs.log $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
 		;;
 	*)
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -syslog $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
 		rm -f $LOG_PATH/*
 		;;
 	esac

dnsmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.18
+PKG_VERSION:=1.0.17
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=80fa147e6f1f0d9c1a62a62a693ff3adaef45363
+PKG_SOURCE_VERSION:=2ceb76e98cf23a8d52ab3f464d38d62385311a87
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

dslmngr/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.10
+PKG_VERSION:=1.2.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE_VERSION:=8fb4093b4d26b3cb06603e110d424005e33cf5d6
+PKG_SOURCE_VERSION:=5340cb31f759301f5aca3fd848fc3a63b0b4663f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
@@ -30,8 +30,6 @@ include ../bbfdm/bbfdm.mk
 
 ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_PLATFORM=BROADCOM
-else ifneq ($(CONFIG_TARGET_airoha),)
-  TARGET_PLATFORM=AIROHA
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -43,7 +41,7 @@ define Package/dslmngr
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
   DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +TARGET_airoha:br2684ctl
+  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
 endef
 
 define Package/dslmngr/description
@@ -77,10 +75,7 @@ define Package/dslmngr/install
 	$(CP) ./files/common/* $(1)/
 ifeq ($(CONFIG_TARGET_brcmbca),y)
 	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
 endif
-
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)

dslmngr/files/airoha/etc/init.d/xdsl_wan

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=99
-USE_PROCD=1
-
-start_service() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ -f /etc/board.json ] || return 0
-
-	if [ "$need_xdsl" != "" ]; then
-		procd_open_instance xdsl_wan
-		procd_set_param command /sbin/xdsl_wan
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-boot() {
-	: # boot-up is handled from 'hsm' application
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "dsl"
-}

dslmngr/files/airoha/lib/dsl/airoha.sh

@@ -1,28 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-xtm_remove_devices() {
-	:
-}
-
-xtm_create_devices() {
-	:
-}
-
-xdsl_configure() {
-	# Support bridged WAN interface
-	ebtables --concurrent -t broute -D BROUTING -p 0xbeed -j DROP 2> /dev/null
-	ebtables --concurrent -t broute -I BROUTING -p 0xbeed -j DROP
-}
-
-xdsl_stop() {
-	return 0
-}
-
-xdsl_init() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ "$need_xdsl" = "" ] && exit 0
-
-	echo "Starting DSL"
-}

dslmngr/files/airoha/sbin/xdsl_wan

@@ -1,270 +0,0 @@
-#!/bin/sh
-
-source "/lib/functions.sh"
-source "/lib/functions/network.sh"
-source "/lib/functions/system.sh"
-
-PREVLINK=""
-LINK=""
-LINKSPEED=""
-PREVWANMODE=""
-WANMODE=""
-CONFIGURED=0
-CINDEX=0
-WANPORT="$(jsonfilter -i /etc/board.json -e @.network.wan.device)"
-
-delete_atm_device() {
-	/userfs/bin/blapi_cmd xdsl atm_delete_interface $CINDEX
-	CINDEX=$((CINDEX+1))
-}
-
-delete_atm_devices() {
-	CINDEX=0
-	config_load dsl
-	config_foreach delete_atm_device atm-device
-}
-
-configure_atm_device() {
-	local vpi vci encapsulation qos_class pcr mbs scr
-	local encap qos ethmac
-
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr "0"
-	config_get mbs $1 mbs "0"
-	config_get scr $1 scr "0"
-
-	case $encapsulation in # llc, vcmux
-		vcmux)
-			encap="1483 Bridged IP VC-Mux"
-		;;
-		*)
-			encap="1483 Bridged IP LLC"
-		;;
-
-	esac
-
-	ethmac="$(echo -n "$(macaddr_add 02:AA:BB:01:23:40 $((CINDEX+2)))" | sed 's#:##g')"
-
-	/userfs/bin/blapi_cmd xdsl create_device $CINDEX ATM "" "$ethmac"
-	/userfs/bin/blapi_cmd xdsl atm_create_interface $CINDEX ATM "$qos_class" "$encap" "$vpi" "$vci" "$pcr" "$scr" "$mbs" 0
-
-	CINDEX=$((CINDEX+1))
-}
-
-create_atm_devices() {
-	delete_atm_devices
-
-	CINDEX=0
-	config_foreach configure_atm_device atm-device
-}
-
-configure_line() {
-	local mode profile bitswap sra us0 sesdrop sos roc ginp gvector mod prof
-	local adsl1_flag=0 issue2_flag=0 Glite_flag=0 adsl2_flag=0 adsl2p_flag=0 vdsl2_flag=0
-	local pro_8a_flag=0 pro_8b_flag=0 pro_8c_flag=0 pro_8d_flag=0 pro_12a_flag=0 pro_12b_flag=0 pro_17a_flag=0 pro_30a_flag=0 pro_35b_flag=0
-
-	config_get mode $1 mode "vdsl2"
-	config_get profile $1 profile "35b"
-	config_get bitswap $1 bitswap "1"
-	config_get sra $1 sra "1"
-	config_get us0 $1 us0 "1"
-	config_get sos $1 sos "0"
-	config_get roc $1 roc "0"
-	config_get ginp $1 ginp "1"
-	config_get gvector $1 gvector "1"
-
-	for mod in $mode; do
-		[ "$mod" = "gdmt" ] && adsl1_flag=1
-		[ "$mod" = "glite" ] && Glite_flag=1
-		[ "$mod" = "t1413" ] && issue2_flag=1
-		[ "$mod" = "adsl2" ] && adsl2_flag=1
-		[ "$mod" = "adsl2p" ] && adsl2p_flag=1
-		[ "$mod" = "vdsl2" ] && vdsl2_flag=1
-	done
-
-	for prof in $profile; do
-		[ "$prof" = "8a" ] && pro_8a_flag=1
-		[ "$prof" = "8b" ] && pro_8b_flag=1
-		[ "$prof" = "8c" ] && pro_8c_flag=1
-		[ "$prof" = "8d" ] && pro_8d_flag=1
-		[ "$prof" = "12a" ] && pro_12a_flag=1
-		[ "$prof" = "12b" ] && pro_12b_flag=1
-		[ "$prof" = "17a" ] && pro_17a_flag=1
-		[ "$prof" = "30a" ] && pro_30a_flag=1
-		[ "$prof" = "35b" ] && pro_35b_flag=1
-	done
-
-	/userfs/bin/blapi_cmd xdsl set_adsl_profile "$pro_8a_flag" "$pro_8b_flag" "$pro_8c_flag" "$pro_8d_flag" "$pro_12a_flag" "$pro_12b_flag" "$pro_17a_flag" "$pro_30a_flag" "$pro_35b_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_mode "$adsl1_flag" "$issue2_flag" "$Glite_flag" "$adsl2_flag" "$adsl2p_flag" "$vdsl2_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_gvector "$((!gvector))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_ginp "$((!ginp))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sos_roc "$((!sos))" "$((!roc))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_us0 "$((!us0))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sra "$((!sra))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_bitswap "$((!bitswap))"
-
-	CONFIGURED=1
-}
-
-configure_lines() {
-	config_load dsl
-	config_foreach configure_line dsl-line
-}
-
-call_wan_hotplug() {
-	# initializations
-	local updown="$1"
-	local ethwan="$2"
-
-	# ethernet hotlugs expect LINK and PORT environment variables set
-	env -i LINK="$updown" PORT="$ethwan" /sbin/hotplug-call ethernet
-}
-
-if [ "$WANPORT" = "ae_wan" -a -f /proc/device-tree/ae_wan/wan-dsl ]; then
-	/etc/init.d/br2684ctl stop
-else
-	/etc/init.d/br2684ctl start
-fi
-
-# Wait for nas0 interface to come up.
-while [ "$(devstatus "$WANPORT" | jsonfilter -e @.up)" != "true" ]; do
-	sleep 1
-done
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-	[ \( "$LINK" = "down" -o "$LINK" = "up" \) ] && break
-	sleep 1
-done
-sleep 2
-
-/userfs/bin/blapi_cmd xdsl set_adsl_sysvid "26 00 47 4E 58 53 00 00" # GNXS vendor id
-/userfs/bin/blapi_cmd xdsl set_adsl_version "$(ubus call fwbank dump | jsonfilter -e "@.bank[@.active=true].swver" | cut -f1 -d'_' | cut -f1 -d'-' | hexdump -e '11/1 "%02x " "\n"' | head -n1)"
-/userfs/bin/blapi_cmd xdsl set_power_up_down 1
-/userfs/bin/blapi_cmd xdsl set_power_up_down 0
-sleep 1
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-
-	if [ "$LINK" != "$PREVLINK" -a \( "$LINK" = "down" -o "$LINK" = "up" \) ]; then
-		if [ "$LINK" = "down" ]; then
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				rm -rf /tmp/qos/wan_link_shape_rate
-				rm -rf /tmp/qos/wan_link_speed
-				/usr/sbin/qos-uplink-bandwidth
-			fi
-
-			[ "$CONFIGURED" -eq 0 ] && configure_lines # Needs to be done once the slave SoC is in down state and we've not been able to auto-sync.
-			if [ -n "$WANMODE" ]; then
-				if [ "$WANMODE" = "PTM" ]; then
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 0 1
-				else
-					delete_atm_devices
-				fi
-			fi
-
-			call_wan_hotplug "down" "$WANPORT"
-		else
-			CONFIGURED=1
-			WANMODE="$(awk '/TPSTC type:/{print $4}' /proc/tc3162/adsl_stats)"
-			if [ "$WANMODE" != "$PREVWANMODE" ]; then
-				OLDWANPORT="$WANPORT"
-				network_defer_device "$OLDWANPORT"
-
-				if [ -f /proc/device-tree/ae_wan/wan-dsl ]; then
-					WANPORT="ae_wan"
-				else
-					WANPORT="nas10"
-				fi
-
-				if [ "$WANMODE" = "PTM" ]; then
-					/etc/init.d/br2684ctl stop
-					delete_atm_devices
-					/userfs/bin/blapi_cmd system set_wan_mode 1
-					/userfs/bin/blapi_cmd xdsl reload_ko 2
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 1 2
-
-					# Set extended TPID for PTM packet flow
-					sys memwl 1FB50000 81001839
-					# VLAN TPID - VLAN
-					sys memwl 1FB50F18 8100
-
-					ifconfig ${WANPORT} mtu 1500
-				else
-					/userfs/bin/blapi_cmd system set_wan_mode 0
-					/userfs/bin/blapi_cmd xdsl reload_ko 1
-					/etc/init.d/br2684ctl start
-
-					# Set extended TPID for ATM packet flow
-					sys memwl 1FB50000 884C1839
-					# VLAN TPID - MPOA
-					sys memwl 1FB50F18 884C
-
-					ifconfig ${WANPORT} mtu 1982
-					ifconfig ${WANPORT} down up
-
-					OLDWANPORT="$WANPORT"
-					ATMINDEX="$(cat /sys/class/atm/TSARM*/atmindex | tail -n1 2> /dev/null)"
-					WANPORT="nas$((ATMINDEX))"
-				fi
-
-				if [ "$OLDWANPORT" != "$WANPORT" ]; then
-					call_wan_hotplug "down" "$OLDWANPORT"
-
-					FILES="$(grep "$OLDWANPORT" /etc/config/* | cut -f1 -d: | uniq | cut -f4 -d/ | xargs)"
-					for FILE in $FILES; do
-						sed -i -e "s#${OLDWANPORT}#${WANPORT}#g" "/etc/config/${FILE}"
-						"/etc/init.d/${FILE}" restart
-					done
-				else
-					/etc/init.d/network restart
-				fi
-				ifconfig ${OLDWANPORT} down up
-			fi
-
-			if [ "$WANMODE" = "PTM" ]; then
-				: # ToDo
-			else
-				create_atm_devices
-			fi
-
-			call_wan_hotplug "up" "$WANPORT"
-			PREVWANMODE="$WANMODE"
-
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				LINKSPEED="$(awk '/far-end interleaved channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-				LINKSPEED=$((LINKSPEED))
-				if [ "$LINKSPEED" -eq 0 ]; then
-					LINKSPEED="$(awk '/far-end fast channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-					LINKSPEED=$((LINKSPEED))
-				fi
-
-				if [ "$LINKSPEED" -ne 0 ]; then
-					mkdir -p /tmp/qos
-					touch /tmp/qos/wan_link_shape_rate
-
-					/userfs/bin/qosrule discpline Rate uplink-bandwidth ${LINKSPEED}
-					hw_nat -! > /dev/null 2>&1
-				else
-					rm -rf /tmp/qos/wan_link_speed
-					/usr/sbin/qos-uplink-bandwidth
-				fi
-			fi
-		fi
-
-		# Toggle link state
-		network_defer_device "$WANPORT"
-		network_ready_device "$WANPORT"
-
-		# We are only interested in the transtion from init -> up/down and up/down -> down/up and vice versa.
-		# Since we poll the status via in-band signaling packets might get lost and the /procfs file is empty.
-		# This state we don't want to handle as it will toggle the link and do a re-setup which is totally unnecessary and unwanted.
-		PREVLINK="$LINK"
-	fi
-
-	sleep 5
-done

dslmngr/files/common/etc/config/dsl

@@ -25,7 +25,6 @@ config dsl-line line
 	list profile 12b
 	list profile 17a
 	list profile 30a
-	list profile 35b
 	option bitswap 1
 	option sra 1
 	option us0 1 # VDSL2 only

ethmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=3.0.8
+PKG_VERSION:=3.0.7
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=c73e5b15718ca40b2740bbe6151dfbb2bcca16df
+PKG_SOURCE_VERSION:=171cf63d972c6fa81b97281531e457a0967c16c7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif

firewallmngr/Config.in

@@ -8,11 +8,5 @@ config FIREWALLMNGR_PORT_TRIGGER
 	help
 	   Set this option to include support for PortTrigger object.
 
-config FIREWALLMNGR_NAT_INTERFACE_SETTING
-	bool "Include Device.NAT.InterfaceSetting"
-	default y
-	help
-	   Set this option to include support for NAT InterfaceSetting object.
-
 endmenu
 endif

firewallmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=firewallmngr
-PKG_VERSION:=1.0.9.2
+PKG_VERSION:=1.0.9
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/firewallmngr.git
-PKG_SOURCE_VERSION:=fdabd33cf42ac02adadbdf43bd8bf86a62d7d1e3
+PKG_SOURCE_VERSION:=77ad8425b73a3ac63f6160dc217635394ac87907
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -52,10 +52,6 @@ ifeq ($(CONFIG_FIREWALLMNGR_PORT_TRIGGER),y)
 	TARGET_CFLAGS += -DINCLUDE_PORT_TRIGGER
 endif
 
-ifeq ($(CONFIG_FIREWALLMNGR_NAT_INTERFACE_SETTING),y)
-	TARGET_CFLAGS += -DINCLUDE_NAT_IF_SETTING
-endif
-
 define Package/firewallmngr/install
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/uci-defaults

firewallmngr/files/firewall.service

@@ -2,8 +2,6 @@
 
 . /lib/functions.sh
 
-ZONE_NAME_FILE="/tmp/service_fw_zone"
-
 log() {
 	echo "${@}"|logger -t firewall.service -p info
 }
@@ -19,37 +17,6 @@ exec_cmd() {
 	return 0
 }
 
-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_foreach collect_zone_name zone
-}
-
-get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
-}
-
 add_iptable_rule() {
 	chain_name=$1
 	protocol=$2
@@ -168,14 +135,9 @@ add_service() {
 	fi
 
 	action=$(echo "${target}" | tr a-z A-Z)
-	zone_name="$(get_firewall_zone ${interface})"
-	if [ -z "${zone_name}" ]; then
-		log "Rule can not be added without zone name for interface ${interface}"
-		return
-	fi
-
-	chain_name="zone_${zone_name}_input"
+	chain_name="zone_${interface}_input"
 	res=0
+
 	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
 
 	if [ "${count}" -eq 0 ]; then
@@ -198,9 +160,4 @@ add_service() {
 }
 
 config_load firewall
-
-load_zone_names
-
 config_foreach add_service "service"
-
-rm -f "${ZONE_NAME_FILE}"

fluent-bit/Makefile

@@ -5,16 +5,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=fluent-bit
-PKG_VERSION:=4.0.4
+PKG_VERSION:=4.0.2
 PKG_RELEASE:=$(AUTORELEASE)
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit.git
-PKG_SOURCE_VERSION=v$(PKG_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
+PKG_SOURCE_URL_FILE:=v$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit/archive/refs/tags/
+PKG_HASH:=aa0577ba7251081c8d5398b2a905b5b0585bb657ca13b39a5e12931437516f08
 endif
 
 PKG_LICENSE:=Apache-2.0
@@ -56,7 +55,7 @@ CMAKE_OPTIONS+= \
 	-DFLB_BACKTRACE=No \
 	-DFLB_KAFKA=No \
 	-DFLB_WASM=No \
-	-DFLB_LUAJIT=No
+	-DFLB_LUAJIT=Yes
 
 # In plugins
 CMAKE_OPTIONS += \
@@ -66,15 +65,15 @@ CMAKE_OPTIONS += \
 	-DFLB_IN_DISK=Yes \
 	-DFLB_IN_EXEC=Yes \
 	-DFLB_IN_HEAD=Yes \
-	-DFLB_IN_KMSG=Yes \
-	-DFLB_IN_TAIL=Yes \
 	-DFLB_IN_FORWARD=No \
+	-DFLB_IN_KMSG=No \
 	-DFLB_IN_PROC=No \
 	-DFLB_IN_RANDOM=No \
 	-DFLB_IN_SERIAL=No \
 	-DFLB_IN_MQTT=No \
 	-DFLB_IN_STDIN=No \
 	-DFLB_IN_SYSTEMD=No \
+	-DFLB_IN_TAIL=No \
 	-DFLB_IN_TCP=No \
 	-DFLB_IN_THERMAL=No \
 	-DFLB_IN_UDP=No \
@@ -104,10 +103,10 @@ CMAKE_OPTIONS += \
 
 # Filter options
 CMAKE_OPTIONS += \
+	-DFLB_FILTER_LUA=Yes \
 	-DFLB_FILTER_AWS=No \
 	-DFLB_FILTER_ECS=No \
 	-DFLB_FILTER_KUBERNETES=No \
-	-DFLB_FILTER_LUA=No \
 	-DFLB_FILTER_NEST=No \
 	-DFLB_FILTER_RECORD_MODIFIER=No \
 	-DFLB_FILTER_THROTTLE=No \
@@ -171,7 +170,6 @@ CMAKE_OPTIONS += \
 define Package/fluent-bit/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/fluent-bit
-	$(INSTALL_DIR) $(1)/etc/fluent-bit/conf.d
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/fluent-bit $(1)/usr/sbin/
 	$(INSTALL_DATA) ./files/fluent-bit.conf $(1)/etc/fluent-bit/fluent-bit.conf
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/conf/parsers.conf $(1)/etc/fluent-bit/parsers.conf

fluent-bit/files/fluent-bit.conf

@@ -9,10 +9,6 @@
     tag             syslog
     path            /dev/log
 
-[INPUT]
-    name            kmsg
-    tag             kernel
-
 [OUTPUT]
     name            null
     match           *

fluent-bit/patches/0002-add_hostname_to_log_dump.patch

@@ -0,0 +1,45 @@
+diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
+index 2e47c9666..95d28e438 100644
+--- a/plugins/out_file/file.c
++++ b/plugins/out_file/file.c
+@@ -27,6 +27,7 @@
+ #include <msgpack.h>
+ 
+ #include <stdio.h>
++#include <unistd.h>
+ #include <sys/types.h>
+ #include <sys/stat.h>
+ #include <fcntl.h>
+@@ -55,6 +56,7 @@ struct flb_file_conf {
+     int csv_column_names;
+     int mkdir;
+     struct flb_output_instance *ins;
++    char hostname[256];
+ };
+ 
+ static char *check_delimiter(const char *str)
+@@ -141,6 +143,9 @@ static int cb_file_init(struct flb_output_instance *ins,
+         }
+     }
+ 
++    if (gethostname(ctx->hostname, sizeof(ctx->hostname)) != 0)
++	    snprintf(ctx->hostname, sizeof(ctx->hostname), "%s", "localhost");
++
+     tmp = flb_output_get_property("delimiter", ins);
+     ret_str = check_delimiter(tmp);
+     if (ret_str != NULL) {
+@@ -233,12 +238,8 @@ static int template_output_write(struct flb_file_conf *ctx,
+     int i;
+     msgpack_object_kv *kv;
+ 
+-    /*
+-     * Right now we treat "{time}" specially and fill the placeholder
+-     * with the metadata timestamp (formatted as float).
+-     */
+-    if (!strncmp(key, "time", size)) {
+-        fprintf(fp, "%f", flb_time_to_double(tm));
++    if (!strncmp(key, "hostname", size)) {
++        fprintf(fp, "%s", ctx->hostname);
+         return 0;
+     }
+ 

fluent-bit/patches/0002-file_out_time.patch

@@ -1,27 +0,0 @@
-diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
-index 77baf6be8..04c519d5a 100644
---- a/plugins/out_file/file.c
-+++ b/plugins/out_file/file.c
-@@ -238,10 +238,20 @@ static int template_output_write(struct flb_file_conf *ctx,
- 
-     /*
-      * Right now we treat "{time}" specially and fill the placeholder
--     * with the metadata timestamp (formatted as float).
-+     * with the metadata timestamp.
-      */
-     if (!strncmp(key, "time", size)) {
--        fprintf(fp, "%f", flb_time_to_double(tm));
-+        struct tm tm_local;
-+        char buf[32];
-+        if (localtime_r(&tm->tm.tv_sec, &tm_local) == NULL) {
-+            flb_plg_error(ctx->ins, "localtime_r failed");
-+            return -1;
-+        }
-+        if (strftime(buf, sizeof(buf), "%b %d %H:%M:%S", &tm_local) == 0) {
-+            flb_plg_error(ctx->ins, "strftime failed");
-+            return -1;
-+        }
-+        fputs(buf, fp);
-         return 0;
-     }
- 

fluent-bit/patches/0003-fix_luajit_compile_error.patch

@@ -0,0 +1,24 @@
+diff --git a/lib/luajit-cmake/LuaJIT.cmake b/lib/luajit-cmake/LuaJIT.cmake
+index 4ad1ef565..c0dee5830 100644
+--- a/lib/luajit-cmake/LuaJIT.cmake
++++ b/lib/luajit-cmake/LuaJIT.cmake
+@@ -426,10 +426,17 @@ execute_process(
+   OUTPUT_STRIP_TRAILING_WHITESPACE
+ )
+ 
+-if (GIT_EXISTENCE EQUAL 0)
++execute_process(
++  COMMAND git rev-parse --is-inside-work-tree
++  RESULT_VARIABLE GIT_IN_REPOSITORY
++  OUTPUT_VARIABLE GIT_IS_IN_REPOSITORY
++  OUTPUT_STRIP_TRAILING_WHITESPACE
++)
++
++if ((GIT_EXISTENCE EQUAL 0) AND (GIT_IN_REPOSITORY EQUAL 0))
+   message(STATUS "Using Git: ${GIT_VERSION}")
+   add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/luajit_relver.txt
+-    COMMAND git show -s --format=${GIT_FORMAT} > ${CMAKE_CURRENT_BINARY_DIR}/luajit_relver.txt
++    COMMAND git -c log.showSignature=false show -s --format=${GIT_FORMAT} > ${CMAKE_CURRENT_BINARY_DIR}/luajit_relver.txt
+     WORKING_DIRECTORY ${LUAJIT_DIR}
+   )
+ else()

fluent-bit/patches/0003-prepend_length_in_syslog_output.patch

@@ -1,47 +0,0 @@
-diff --git a/plugins/out_syslog/syslog.c b/plugins/out_syslog/syslog.c
-index 4ecc7c4ac..cfe568245 100644
---- a/plugins/out_syslog/syslog.c
-+++ b/plugins/out_syslog/syslog.c
-@@ -776,12 +776,42 @@ static flb_sds_t syslog_format(struct flb_syslog *ctx, msgpack_object *o,
-         }
- 
-         if (ctx->parsed_mode != FLB_SYSLOG_UDP) {
-+            unsigned int msg_len = 0;
-+
-+            /* Create new SDS for length prefix */
-+            flb_sds_t prefix = flb_sds_create_size(ctx->maxsize + 32);
-+            if (!prefix) {
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            /* Add newline also to make behaviour similar to syslog-ng */
-             tmp = flb_sds_cat(*s, "\n", 1);
-             if (!tmp) {
-+                flb_sds_destroy(prefix);
-                 ret_sds = NULL;
-                 goto clean;
-             }
-             *s = tmp;
-+
-+            msg_len = flb_sds_len(*s);
-+            tmp = flb_sds_printf(&prefix, "%u ", msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+            prefix = tmp;
-+
-+            tmp = flb_sds_cat(prefix, *s, msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            flb_sds_destroy(*s);
-+            *s = tmp;
-         }
-     }
-     else {

fluent-bit/patches/0020-fix_kmsg.patch

@@ -1,73 +0,0 @@
-diff --git a/plugins/in_kmsg/in_kmsg.c b/plugins/in_kmsg/in_kmsg.c
-index cd5c4cd17..15f105451 100644
---- a/plugins/in_kmsg/in_kmsg.c
-+++ b/plugins/in_kmsg/in_kmsg.c
-@@ -36,7 +36,6 @@
- #include <sys/stat.h>
- #include <sys/time.h>
- #include <inttypes.h>
--#include <time.h>
- 
- #include "in_kmsg.h"
- 
-@@ -123,12 +122,17 @@ static inline int process_line(const char *line,
-     ctx->buffer_id++;
- 
-     errno = 0;
--    val = strtol(p, &end, 10);
--    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoul(p, &end, 10);
-+    if ((errno == ERANGE && val == ULONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* ensure something was consumed */
-+    if (end == p) {
-+        goto fail;
-+    }
-+
-     /* Priority */
-     priority = FLB_KLOG_PRI(val);
- 
-@@ -144,24 +148,35 @@ static inline int process_line(const char *line,
-     }
-     p++;
- 
--    val = strtoul(p, &end, 10);
--    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoull(p, &end, 10);
-+    if ((errno == ERANGE && val == ULLONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* make sure strtoull consumed something */
-+    /* after the sequence number, the next char must be ',' */
-+    if (end == p || *end != ',') {
-+        goto fail;
-+    }
-+
-     sequence = val;
-     p = ++end;
- 
-     /* Timestamp */
--    val = strtoul(p, &end, 10);
--    if ((errno == ERANGE && (val == INT_MAX || val == INT_MIN))
-+    val = strtoull(p, &end, 10);
-+    if ((errno == ERANGE && val == ULLONG_MAX)
-         || (errno != 0 && val == 0)) {
-         goto fail;
-     }
- 
-+    /* ensure something was consumed */
-+    if (end == p) {
-+        goto fail;
-+    }
-+
-     tv.tv_sec  = val/1000000;
--    tv.tv_usec = val - (tv.tv_sec * 1000000);
-+    tv.tv_usec = val - ((uint64_t)tv.tv_sec * 1000000);
- 
-     flb_time_set(&ts, ctx->boot_time.tv_sec + tv.tv_sec, tv.tv_usec * 1000);
- 

hostmngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostmngr
-PKG_VERSION:=1.3.3
+PKG_VERSION:=1.2.20
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=fee5bd0067fc1f30498bc2b81e893d170796b459
+PKG_SOURCE_VERSION:=3948618fa8fa23a0ddc51632b0036dbd08e27696
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

icwmp/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.9.9.5
+PKG_VERSION:=9.9.6
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=f3d5843c54a4c1c3e74629f0953a3bf144c2fa8e
+PKG_SOURCE_VERSION:=5dba542b280495730176da468bc45ed5dcc8c94e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -88,7 +88,6 @@ define Package/icwmp/install
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/95-set-random-inform-time $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-migrate-gw-info $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/999-cwmp-conn-config $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/icwmpd/vendor_log.sh $(1)/etc/icwmpd/vendor_log.sh
 	$(INSTALL_BIN) ./files/etc/icwmpd/firewall.cwmp $(1)/etc/icwmpd/firewall.cwmp
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp

icwmp/files/etc/config/cwmp

@@ -28,7 +28,6 @@ config cpe 'cpe'
 	option log_severity 'WARNING'
 	option log_file_name '/var/log/icwmpd.log'
 	option log_max_size '102400'
-	option bind_retries '5'
 	option userid '' #$OUI-$SER
 	option passwd ''
 	option port '7547'

icwmp/files/etc/icwmpd/firewall.cwmp

@@ -1,44 +1,14 @@
 #!/bin/sh
 
-. /lib/functions.sh
-
-ZONE_NAME_FILE="/tmp/cwmp_fw_zone"
-
 #created by the icwmp package
 log() {
 	echo "${@}"|logger -t firewall.cwmp -p info
 }
 
-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_load firewall
-	config_foreach collect_zone_name zone
-}
-
 get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
+	zone="$(uci show firewall|grep network|grep -w "${1}"|cut -d. -f 2)"
+	zone="${zone:-wan}" # defaults to wan zone
+	echo "$zone"
 }
 
 cleanup_upstream_rules() {
@@ -199,6 +169,4 @@ configure_connection_req_rules() {
 	fi
 }
 
-load_zone_names
 configure_connection_req_rules "$@"
-rm -f "${ZONE_NAME_FILE}"

icwmp/files/etc/init.d/icwmpd

@@ -16,6 +16,79 @@ log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
+regenerate_ssl_link() {
+	local cert_dir
+
+	cert_dir="${1%/}"
+	if [ -f "${cert_dir}" ]; then
+		return 0
+	fi
+
+	# do not generate the c_rehash if its system default cert path
+	# ca-certificate package already generates c_rehash on compilation
+	[ ! -d "${cert_dir}" ] || [ "${cert_dir}" = "/etc/ssl/certs" ] && return 0
+
+	generate_links() {
+		local file_type="$1"
+		local files="${cert_dir}"/*."${file_type}"
+		for cfile in ${files}; do
+			if [ -f "${cfile}" ]; then
+				rehash="$(openssl x509 -hash -noout -in "${cfile}")"
+				if [ ! -f "${cert_dir}/${rehash}.0" ]; then
+					log "Generating c_rehash for ${cfile}=>${rehash}.0"
+					ln -s "${cfile}" "${cert_dir}/${rehash}.0"
+				fi
+			fi
+		done
+	}
+
+	generate_links "pem"
+}
+
+enable_dhcp_option43() {
+	local wan="${1}"
+
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local reqopts="$(uci -q get network."${wan}".reqopts)"
+	local proto="$(uci -q get network."${wan}".proto)"
+	local newreqopts=""
+	local option43_present=0
+
+	for ropt in $reqopts; do
+		case $ropt in
+			43) option43_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	if [ ${option43_present} -eq 1 ]; then
+		return;
+	fi
+
+	newreqopts="$reqopts 43"
+	if [ "${proto}" = "dhcp" ]; then
+		uci -q set network."${wan}".reqopts="$newreqopts"
+		uci commit network
+		ubus call network reload
+	fi
+}
+
+set_vendor_id() {
+	local wan="${1}"
+	local proto="$(uci -q get network."${wan}".proto)"
+
+	if [ "${proto}" = "dhcp" ]; then
+		vendorid="$(uci -q get network."${wan}".vendorid)"
+		if [ -z "${vendorid}" ]; then
+			uci -q set network."${wan}".vendorid="dslforum.org"
+			ubus call uci commit '{"config":"network"}'
+		elif [[ $vendorid != *"dslforum.org"* ]]; then
+			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
+			ubus call uci commit '{"config":"network"}'
+		fi
+	fi
+}
+
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -138,6 +211,28 @@ validate_defaults() {
 }
 
 boot() {
+	local dhcp_discovery wan_interface skip_dhcp_boot_options
+
+	config_load cwmp
+	config_get wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get skip_dhcp_boot_options acs skip_dhcp_boot_options "0"
+
+	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
+		if [ "${skip_dhcp_boot_options}" -ne 1 ]; then
+			# Set dhcp option 43 if not already configured
+			enable_dhcp_option43 "${wan_interface}"
+			# Set dhcp option 60
+			set_vendor_id "${wan_interface}"
+		fi
+	fi
+
+	config_get ssl_capath acs ssl_capath
+
+	if [ -n "${ssl_capath}" ]; then
+		regenerate_ssl_link "${ssl_capath}"
+	fi
+
 	# Copy backup data so that if it restart latter on, it gets the info
 	copy_cwmp_etc_files_to_varstate
 	mkdir -p /var/run/icwmpd/

icwmp/files/etc/uci-defaults/999-cwmp-conn-config

@@ -1,107 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t cwmp.defaults -p info
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-		fi
-	fi
-}
-
-enable_dhcp_option43() {
-	local wan="${1}"
-
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
-	for ropt in $reqopts; do
-		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
-	fi
-}
-
-regenerate_ssl_link() {
-	local cert_dir
-
-	cert_dir="${1%/}"
-	if [ -f "${cert_dir}" ]; then
-		return 0
-	fi
-
-	# do not generate the c_rehash if its system default cert path
-	# ca-certificate package already generates c_rehash on compilation
-	[ ! -d "${cert_dir}" ] || [ "${cert_dir}" = "/etc/ssl/certs" ] && return 0
-
-	generate_links() {
-		local file_type="$1"
-		local files="${cert_dir}"/*."${file_type}"
-		for cfile in ${files}; do
-			if [ -f "${cfile}" ]; then
-				rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-				if [ ! -f "${cert_dir}/${rehash}.0" ]; then
-					log "Generating c_rehash for ${cfile}=>${rehash}.0"
-					ln -s "${cfile}" "${cert_dir}/${rehash}.0"
-				fi
-			fi
-		done
-	}
-
-	generate_links "pem"
-}
-
-configure_dhcp_discovery() {
-	local dhcp_discovery wan_interface skip_dhcp_boot_options
-
-	config_load cwmp
-	config_get wan_interface cpe default_wan_interface "wan"
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get skip_dhcp_boot_options acs skip_dhcp_boot_options "0"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		if [ "${skip_dhcp_boot_options}" -ne 1 ]; then
-			# Set dhcp option 43 if not already configured
-			enable_dhcp_option43 "${wan_interface}"
-			# Set dhcp option 60
-			set_vendor_id "${wan_interface}"
-		fi
-	fi
-}
-
-configure_ssl_path() {
-	local ssl_capath
-
-	config_load cwmp
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-}
-
-configure_dhcp_discovery
-configure_ssl_path

ieee1905/Makefile

@@ -1,17 +1,16 @@
 #
 # Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis Sweden AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.7.33
+PKG_VERSION:=8.7.8
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f28f1c04cae008d7d6448ba02b992506af28448c
+PKG_SOURCE_VERSION:=9c507bfb7f45fad81097262f05dc7cd11760e6b0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -106,7 +105,6 @@ TARGET_CFLAGS += -DHAS_UBUS
 
 ifeq ($(CONFIG_IEEE1905_BUILD_TR181_PLUGIN),y)
 TARGET_CFLAGS += -DBUILD_TR181_PLUGIN
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
 endif
 
 MAKE_FLAGS += \

ieee1905/files/etc/config/ieee1905

@@ -12,7 +12,6 @@ config al-iface
 	list ifname 'br-lan'
 	list ifname '/eth.*'
 	list ifname '/wl.*'
-	list ifname '/ra.*'
 	list ifname '/wds.*'
 
 # ap sections are auto-generated/overwritten during onboarding

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,9 +1,10 @@
 #!/bin/sh
 
-. /lib/functions/system.sh
 
-BMAC=$(get_mac_label)
+BMAC=$(db -q get hw.board.basemac)
 BMAC=${BMAC//:/}
+BMAC=${BMAC// /}
+BMAC=$(printf "%12.12X" $((0x$BMAC)))
 
 [ "$BMAC" == "" ] && exit 1
 

iopsys-analytics/Makefile

@@ -4,7 +4,7 @@ PKG_NAME:=iopsys-analytics
 PKG_RELEASE:=$(COMMITCOUNT)
 PKG_LICENSE:=PROPRIETARY
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=25e32ac5a860aec6e53e3449565b71595073e014
+PKG_SOURCE_VERSION:=00189cea0a78b7a30dbfdd363b6d8e836437d1bc
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopsys-analytics.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -31,9 +31,8 @@ define Package/$(PKG_NAME)
     +@PACKAGE_COLLECTD_ENCRYPTED_NETWORK                \
   # remote syslog
   DEPENDS+=                                             \
-    +@PACKAGE_syslog-ng:SYSLOGNG_LOGROTATE              \
-    +PACKAGE_fluent-bit:logrotate                       \
-    +@DMCLI_REMOTE_CONNECTION
+    +syslog-ng                                          \
+    +@SYSLOGNG_LOGROTATE                                \
 
 endef
 
@@ -45,13 +44,7 @@ endef
 Build/Compile=
 
 define Package/$(PKG_NAME)/install
-	$(CP) -r $(PKG_BUILD_DIR)/files/common/*  $(1)/
-ifneq ($(CONFIG_PACKAGE_fluent-bit),)
-	$(CP) -r $(PKG_BUILD_DIR)/files/fluent-bit/*  $(1)/
-endif
-ifneq ($(CONFIG_PACKAGE_syslog-ng),)
-	$(CP) -r $(PKG_BUILD_DIR)/files/syslog-ng/*  $(1)/
-endif
+	$(CP) -r $(PKG_BUILD_DIR)/files/*  $(1)/
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

ipt-trigger/Makefile

@@ -6,13 +6,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ipt-trigger
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.2
 PKG_LICENSE:=GPL-2.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ac1beae4794f99533b28db7d0e6e80f4c268a3e8
+PKG_SOURCE_VERSION:=4f3d4427403e0a9be7653c1b92907ae8ae5f21ae
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ipt-trigger.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

json-schema-validator/Makefile

@@ -1,55 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=json-schema-validator
-PKG_VERSION:=2.3.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/pboettch/json-schema-validator.git
-PKG_SOURCE_VERSION:=$(PKG_VERSION)
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_BUILD_DEPENDS:=nlohmann-json
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-CMAKE_OPTIONS += \
-	-DJSON_VALIDATOR_BUILD_TESTS=OFF \
-	-DJSON_VALIDATOR_BUILD_EXAMPLES=OFF \
-	-DJSON_VALIDATOR_INSTALL=ON \
-	-DJSON_VALIDATOR_SHARED_LIBS=OFF
-
-define Package/json-schema-validator
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=JSON Schema Validator for nlohmann::json
-  URL:=https://github.com/pboettch/json-schema-validator
-  DEPENDS:=+libstdcpp +nlohmann-json
-endef
-
-define Package/json-schema-validator/description
-  A JSON Schema Validator for Modern C++ using nlohmann/json.
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/nlohmann
-	$(CP) $(PKG_BUILD_DIR)/src/nlohmann/json-schema.hpp $(1)/usr/include/nlohmann/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libnlohmann_json_schema_validator*.a $(1)/usr/lib/ 2>/dev/null || true
-	$(CP) $(PKG_BUILD_DIR)/libnlohmann_json_schema_validator*.so* $(1)/usr/lib/ 2>/dev/null || true
-endef
-
-define Package/json-schema-validator/install
-	true
-endef
-
-$(eval $(call BuildPackage,json-schema-validator))

jsonval/Makefile

@@ -1,44 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=jsonval
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_LICENSE:=MIT
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/jsonval
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Command-line JSON Schema Validator
-  DEPENDS:=+nlohmann-json +json-schema-validator +libstdcpp
-endef
-
-define Package/jsonval/description
-  A small CLI tool to validate JSON files against a schema using json-schema-validator and nlohmann/json.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	cp -r ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(TARGET_CXX) \
-		$(TARGET_CXXFLAGS) -std=c++17 \
-		-I$(STAGING_DIR)/usr/include \
-		-I$(STAGING_DIR)/usr/include/nlohmann \
-		-L$(STAGING_DIR)/usr/lib \
-		$(PKG_BUILD_DIR)/main.cpp \
-		-o $(PKG_BUILD_DIR)/jsonval \
-		-lnlohmann_json_schema_validator
-endef
-
-define Package/jsonval/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/jsonval $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,jsonval))

jsonval/src/main.cpp

@@ -1,64 +0,0 @@
-#include <iostream>
-#include <fstream>
-#include <string>
-#include <nlohmann/json.hpp>
-#include <nlohmann/json-schema.hpp>
-
-using nlohmann::json;
-using nlohmann::json_schema::json_validator;
-using namespace std;
-
-void print_usage(const string& prog_name) {
-	cerr << "Usage: " << prog_name << " -s <schema.json> -j <data.json>" << endl;
-}
-
-int main(int argc, char* argv[]) {
-	string schema_path, data_path;
-
-	// Simple argument parsing
-	for (int i = 1; i < argc; ++i) {
-		string arg = argv[i];
-		if ((arg == "-s" || arg == "--schema") && i + 1 < argc) {
-			schema_path = argv[++i];
-		} else if ((arg == "-j" || arg == "--json") && i + 1 < argc) {
-			data_path = argv[++i];
-		} else {
-			print_usage(argv[0]);
-			return 1;
-		}
-	}
-
-	if (schema_path.empty() || data_path.empty()) {
-		print_usage(argv[0]);
-		return 1;
-	}
-
-	ifstream schema_file(schema_path);
-	ifstream data_file(data_path);
-
-	if (!schema_file.is_open() || !data_file.is_open()) {
-		cerr << "Error: Could not open one or both files." << endl;
-		return 2;
-	}
-
-	json schema, document;
-	try {
-		schema_file >> schema;
-		data_file >> document;
-	} catch (const json::parse_error& e) {
-		cerr << "Parse error: " << e.what() << endl;
-		return 3;
-	}
-
-	try {
-		json_validator validator;
-		validator.set_root_schema(schema);
-		validator.validate(document);
-		cout << "Valid" << endl;
-	} catch (const std::exception& e) {
-		cerr << "Validation failed: " << e.what() << endl;
-		return 4;
-	}
-
-	return 0;
-}

libdpp/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libdpp
-PKG_VERSION:=2.1.2
+PKG_VERSION:=2.1.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5f1184c52be19f3bfd3bc7e9bc582ef09b0a2b1c
+PKG_SOURCE_VERSION:=6024efd3db9dd490c07465ea9b0c15120063165c
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/libdpp.git
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

libdsl/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libdsl
-PKG_VERSION:=7.3.2
+PKG_VERSION:=7.2.100
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=20875ec79fcc7c546c2f1253c867d6afbc8bff75
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/libdsl.git
-PKG_SOURCE_VERSION:=1aa9c40f9503311652e562617b1e15533257adcc
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -37,9 +37,6 @@ else ifeq ($(CONFIG_TARGET_x86),y)
 else ifeq ($(CONFIG_TARGET_armvirt),y)
   TARGET_PLATFORM=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=AIROHA
-  TARGET_CFLAGS +=-DIOPSYS_AIROHA
 endif
 
 TARGET_CFLAGS += \
@@ -60,7 +57,7 @@ define Package/libdsl
   SUBMENU:=IOPSYS HAL libs
   MENU:=1
   TITLE:= xDSL library (libdsl)
-  DEPENDS+=TARGET_brcmbca:bcm963xx-bsp +TARGET_airoha:libeasy
+  DEPENDS+=TARGET_brcmbca:bcm963xx-bsp
 endef
 
 define Package/libdsl/description

libvoice-airoha/Makefile

@@ -8,7 +8,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libvoice-airoha
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.7
+PKG_VERSION:=1.1.3
 PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
@@ -17,7 +17,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=3a30086a68a3409f0396acb01380f91daabf7a2f
+PKG_SOURCE_VERSION:=f4ffa38b77e20f9e2a6b6ffd5b2bf83cddb6bffc
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

libvoice-airoha/files/etc/uci-defaults/991-libvoice-airoha

@@ -17,11 +17,6 @@ SLIC=$(cat /proc/device-tree/airoha-voice/slic-type)
 hasDect=$(db -q get hw.board.hasDect)
 [ "$hasDect" = "1" ] || exit 0
 
-# Set the DECT RFPI
-. /lib/functions/iopsys-environment.sh
-db set hw.board.dect_rfpi=$(get_dect_rfpi)
-db commit
-
 # configure the PCM for DECT/DCX81
 [ -f "/proc/device-tree/aliases/dcx81-uart" ] && {
     uci set dect.global.pcm_fsync='SHORT_LF'

libwifi/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libwifi
-PKG_VERSION:=7.13.7
+PKG_VERSION:=7.12.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0b3cc45334c167d164c2c79e82522f13698abf92
+PKG_SOURCE_VERSION:=0877163a9653a9f83c8244aa24f762a131ae02a6
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libwifi.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -61,7 +61,7 @@ else
 endif
 
 ifneq ($(CONFIG_PACKAGE_kmod-mt7915e_en7523),)
-  TARGET_CFLAGS +=-DMT7915_VENDOR_EXT
+  TARGET_CFLAGS=-DMT7915_VENDOR_EXT
 endif
 
 PKG_BUILD_DEPENDS:=PACKAGE_kmod-mt7915e_en7523:mt76_en7523

linux-pam/Makefile

@@ -31,8 +31,8 @@ MESON_ARGS += \
 
 define Package/linux-pam/install
 	$(INSTALL_DIR) $(1)/usr/lib/security
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./linux_pam.init $(1)/etc/init.d/linux_pam
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/pam_faillock.uci_default $(1)/etc/uci-defaults/99-add_pam_faillock
 endef
 
 $(eval $(call BuildPackage,linux-pam))

linux-pam/files/pam_faillock.uci_default

@@ -0,0 +1,43 @@
+#!/bin/sh
+
+create_faillock_files()
+{
+	# also create files needed by pam_faillock
+	touch /var/log/faillock
+	chmod 700 /var/log/faillock
+	touch /var/log/btmp
+	chmod 700 /var/log/btmp
+}
+
+update_pam_common_auth()
+{
+	local file="/etc/pam.d/common-auth"
+	local deny=6
+	local unlock_time=300
+
+	# update pam_unix.so line
+	sed -i -E 's|^.*pam_unix\.so.*|auth\t sufficient\tpam_unix.so nullok_secure|' "$file"
+
+	# Insert pam_faillock lines before and after pam_unix.so
+	sed -i -E "/pam_unix.so nullok_secure/i auth     required       pam_faillock.so preauth deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
+	sed -i -E "/pam_unix.so nullok_secure/a auth     [default=die]  pam_faillock.so authfail audit deny=$deny even_deny_root unlock_time=$unlock_time" "$file"
+}
+
+update_pam_common_account()
+{
+	# update account file
+	sed -i "/pam_unix.so/ i account  required       pam_faillock.so" /etc/pam.d/common-account
+}
+
+if [ -f "/usr/lib/security/pam_faillock.so" ]; then
+	update_pam_common_auth
+	update_pam_common_account
+	create_faillock_files
+fi
+
+if [ -f /etc/config/sshd ]; then
+	uci -q set sshd.@sshd[0].UsePAM=1
+	uci commit sshd
+fi
+
+exit 0

linux-pam/linux_pam.init

@@ -1,18 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=11
-STOP=90
-USE_PROCD=1
-
-create_faillock_files()
-{
-	# also create files needed by pam_faillock
-	touch /var/log/faillock
-	chmod 700 /var/log/faillock
-	touch /var/log/btmp
-	chmod 700 /var/log/btmp
-}
-
-boot() {
-	create_faillock_files
-}

logmngr/Config.in

@@ -1,5 +1,4 @@
 if PACKAGE_logmngr
-
 choice
 	prompt "Select backend for syslog management"
 	default LOGMNGR_BACKEND_FLUENTBIT
@@ -32,5 +31,4 @@ config LOGMNGR_VENDOR_LOG_FILE
 	default y
 	help
 		It adds support for Device.DeviceInfo.VendorLogFile. Object.
-
 endif

logmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=logmngr
-PKG_VERSION:=1.1.4
+PKG_VERSION:=1.0.15
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/system/logmngr.git
-PKG_SOURCE_VERSION:=62441fdfe14a39bff8fff7c62307bd7b54d7240f
+PKG_SOURCE_VERSION:=1561b71a2225af737db9f091204247ab4e141abb
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -29,6 +29,7 @@ define Package/logmngr
  CATEGORY:=Utilities
  TITLE:=Logging Manager
  DEPENDS:=+LOGMNGR_BACKEND_FLUENTBIT:fluent-bit
+ DEPENDS+=+@LOGMNGR_BACKEND_FLUENTBIT:BUSYBOX_CONFIG_KLOGD
  DEPENDS+=+LOGMNGR_BACKEND_SYSLOG_NG:syslog-ng
  DEPENDS+=+LOGMNGR_LOGROTATE:logrotate
  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
@@ -52,35 +53,31 @@ endif
 
 define Package/logmngr/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_BIN) ./files/logmngr.init $(1)/etc/init.d/logmngr
+
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/10-logmngr_config_generate $(1)/etc/uci-defaults/
 
-	$(INSTALL_BIN) ./files/etc/init.d/logmngr $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/logmngr $(1)/etc/config/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/10-logmngr_config_migrate $(1)/etc/uci-defaults/
-
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfsyslog.so $(1) core 10
-
-	# Install logmngr service backend
 	$(INSTALL_DIR) $(1)/lib/logmngr
 ifeq ($(CONFIG_LOGMNGR_BACKEND_FLUENTBIT),y)
+	$(INSTALL_DATA) ./files/lib/logmngr/fluent-bit.sh $(1)/lib/logmngr/
+	$(INSTALL_DIR) $(1)/usr/libexec
+	$(INSTALL_BIN) ./files/logmngr-klogd $(1)/usr/libexec/
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) ./files/logread $(1)/sbin/
-	$(INSTALL_DATA) ./files/lib/logmngr/fluent-bit.sh $(1)/lib/logmngr/
-else ifeq ($(CONFIG_LOGMNGR_BACKEND_SYSLOG_NG),y)
+endif
+ifeq ($(CONFIG_LOGMNGR_BACKEND_SYSLOG_NG),y)
 	$(INSTALL_DATA) ./files/lib/logmngr/syslog-ng.sh $(1)/lib/logmngr/
 endif
-
+	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfsyslog.so $(1) core 10
 ifeq ($(CONFIG_LOGMNGR_LOGROTATE),y)
+	$(INSTALL_BIN) ./files/11-logmngr_logrotate_config_generate $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/logmngr/logrotate.sh $(1)/lib/logmngr/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/11-logmngr_logrotate_syslog $(1)/etc/uci-defaults/
 	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbflogrotate.so $(1) sysmngr 11
 endif
-
 ifeq ($(CONFIG_LOGMNGR_VENDOR_LOG_FILE),y)
 	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/bbf_plugin/libbbfvendorlog.so $(1) sysmngr 12
 endif
-
 endef
 
 $(eval $(call BuildPackage,logmngr))

logmngr/files/10-logmngr_config_generate

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+if uci -q get logmngr.@globals[0] >/dev/null; then
+	# return if there is any valid content
+	exit 0
+else
+	rm -f /etc/config/logmngr
+fi
+
+touch /etc/config/logmngr
+
+uci set logmngr.globals=globals
+uci set logmngr.globals.enable=1
+
+uci set logmngr.a1=action
+uci set logmngr.a1.name="ac1"
+
+uci set logmngr.lf1=log_file
+uci set logmngr.lf1.enable=1
+uci set logmngr.lf1.action="ac1"
+uci set logmngr.lf1.file="/var/log/messages"
+
+uci set logmngr.lr1=log_remote
+uci set logmngr.lr1.enable=0
+uci set logmngr.lr1.action="ac1"
+uci set logmngr.lr1.port="514"

logmngr/files/11-logmngr_logrotate_config_generate

@@ -1,7 +1,7 @@
 #!/bin/sh
 
 # Adds a default log rotate policy if none exists
-if uci -q get logmngr.lro1 >/dev/null; then
+if uci -q get logmngr.@log_rotate[0] >/dev/null; then
 	# return if there is any valid content
 	exit 0
 fi

logmngr/files/etc/config/logmngr

@@ -1,26 +0,0 @@
-config globals 'globals'
-	option enable '1'
-
-config source 'default_source'
-	option name 'default_source'
-	option system_messages '1'
-	option kernel_messages '1'
-
-config template 'default_template'
-	option name 'default_template'
-	option expression '{time} {hostname} {ident}[{pid}]: {message}'
-
-config action 'default_action'
-	option name 'default_action'
-	list source 'default_source'
-	option template 'default_template'
-
-config log_file 'lf1'
-	option enable '1'
-	option action 'default_action'
-	option file '/var/log/messages'
-
-config log_remote 'lr1'
-	option enable '0'
-	option action 'default_action'
-	option port '514'

logmngr/files/etc/uci-defaults/10-logmngr_config_migrate

@@ -1,36 +0,0 @@
-#!/bin/sh
-
-# check if this is a new type UCI or old type UCI
-if ! uci -q get logmngr.default_source > /dev/null; then
-	uci -q set logmngr.default_source=source
-	uci -q set logmngr.default_source.name='default_source'
-	uci -q set logmngr.default_source.system_messages='1'
-	uci -q set logmngr.default_source.kernel_messages='1'
-fi
-
-if ! uci -q get logmngr.default_template > /dev/null; then
-	uci -q set logmngr.default_template=template
-	uci -q set logmngr.default_template.name='default_template'
-	uci -q set logmngr.default_template.expression='{time} {hostname} {ident}[{pid}]: {message}'
-fi
-
-if uci -q get logmngr.a1 >/dev/null; then
-	uci -q rename logmngr.a1='default_action'
-	uci -q set logmngr.default_action.name='default_action'
-	uci -q set logmngr.default_action.template='default_template'
-
-	uci -q delete logmngr.default_action.source
-	uci -q add_list logmngr.default_action.source='default_source'
-fi
-
-if uci -q get logmngr.lf1 >/dev/null; then
-	uci -q rename logmngr.lf1='default_logfile'
-	uci -q set logmngr.default_logfile.action='default_action'
-fi
-
-if uci -q get logmngr.lr1 >/dev/null; then
-	uci -q rename logmngr.lr1='default_logremote'
-	uci -q set logmngr.default_logremote.action='default_action'
-fi
-
-exit 0

logmngr/files/lib/logmngr/fluent-bit.sh

@@ -5,38 +5,6 @@
 
 CONF_FILE=/etc/fluent-bit/fluent-bit.conf
 TMP_CONF_FILE=/tmp/fluent-bit/fluent-bit.conf
-FLUENT_BIT_CONF_DIR=/etc/fluent-bit/conf.d
-PROCESSED_SYSLOG_TAGS=""
-PROCESSED_KMSG_TAGS=""
-
-# check if syslog source section is already processed
-# and add it to the list of processed source sections
-syslog_tag_already_processed() {
-	local tag="$1"
-
-	for t in $PROCESSED_SYSLOG_TAGS; do
-		[ "$t" = "$tag" ] && return 0
-	done
-
-	PROCESSED_SYSLOG_TAGS="$tag $PROCESSED_SYSLOG_TAGS"
-
-	return 1
-}
-
-# check if kmsg source section is already processed
-# and add it to the list of processed source sections
-# two separate functions used because we want to populate
-# appropriate PROCESSED variable
-kmsg_tag_already_processed() {
-	local tag="$1"
-	for t in $PROCESSED_KMSG_TAGS; do
-		[ "$t" = "$tag" ] && return 0
-	done
-
-	PROCESSED_KMSG_TAGS="$tag $PROCESSED_KMSG_TAGS"
-
-	return 1
-}
 
 append_conf() {
 	echo "$*" >> ${TMP_CONF_FILE}
@@ -46,281 +14,201 @@ create_config_file() {
 	mkdir -p /tmp/fluent-bit
 	rm -f ${TMP_CONF_FILE}
 	touch ${TMP_CONF_FILE}
-	# include all files placed in FLUENT_BIT_CONF_DIR directory
-	# fluent-bit does not support using directory in include directive
-	# also, if no file is found then fluent-bit aborts
-	# so only add include if any file is present in the FLUENT_BIT_CONF_DIR
-	if [ -d "$FLUENT_BIT_CONF_DIR" ] && [ "$(ls -A "$FLUENT_BIT_CONF_DIR")" ]; then
-		append_conf "@INCLUDE ${FLUENT_BIT_CONF_DIR}/*"
-	fi
-	append_conf ""
 }
 
 create_service_section() {
 	# the service section of the fluent-bit.conf file has hardcoded values,
 	# no need to lookup any uci section to configure this section
-	append_conf "[SERVICE]"
-	append_conf "    flush        1"
-	append_conf "    daemon       off"
-	append_conf "    log_level    info"
-	append_conf "    coro_stack_size    24576"
-	append_conf "    parsers_file /etc/fluent-bit/parsers.conf"
-	append_conf "    hot_reload        on"
-	append_conf ""
-}
-
-create_default_filters() {
-	append_conf "[FILTER]"
-	append_conf "    name            modify"
-	append_conf "    match           KM*"
-	append_conf "    add             ident   kernel"
-	append_conf "    rename          msg     message"
-	append_conf ""
-
-	append_conf "[FILTER]"
-	append_conf "    name            sysinfo"
-	append_conf "    match           *"
-	append_conf "    hostname_key    hostname"
-	append_conf ""
+	echo "[SERVICE]" >> ${TMP_CONF_FILE}
+	echo "    flush        1" >> ${TMP_CONF_FILE}
+	echo "    daemon       off" >> ${TMP_CONF_FILE}
+	echo "    log_level    info" >> ${TMP_CONF_FILE}
+	echo "    coro_stack_size    24576" >> ${TMP_CONF_FILE}
+	echo "    parsers_file /etc/fluent-bit/parsers.conf" >> ${TMP_CONF_FILE}
+	echo "" >> ${TMP_CONF_FILE}
 }
 
 create_input_section() {
 	local tag="$1"
 
-	[ -z "$tag" ] && return
-
-	# check if this source section has already been processed
-	syslog_tag_already_processed "$tag" && return
-
-	append_conf "[INPUT]"
-	append_conf "    name        syslog"
-	append_conf "    unix_perm   0666"
-	append_conf "    tag         $tag"
-	append_conf "    path        /dev/log"
-	append_conf ""
+	# the input in our case is always syslog, hence, this section of the
+	# fluent-bit.conf file has hardcoded values as well that do not depend
+	# on any uci value
+	echo "[INPUT]" >> ${TMP_CONF_FILE}
+	echo "    name        syslog" >> ${TMP_CONF_FILE}
+	echo "    tag         $tag" >> ${TMP_CONF_FILE}
+	echo "    path        /dev/log" >> ${TMP_CONF_FILE}
+	echo "" >> ${TMP_CONF_FILE}
 }
 
-populate_allowed_logs() {
-	local facility_level sev_level
-	local section="$1"
+generate_facility_regex() {
+	local facility_level=$1
+	local pri=0
 
-	[ -z "$section" ] && return
-
-	# reset
-	match_pattern=""
-	facilities=""
-	all_facilities=0
-	kern_facility=0
-	severities=""
-	sev_compare=1
-	sev_action=0
-
-	# read config
-	config_get match_pattern $section pattern_match
-
-	config_get facility_level $section facility_level
-	config_get sev_level $section severity_level
-	config_get sev_compare $section severity_compare 1
-	config_get sev_action $section severity_action 0
-
-	# normalize facilities
-	if [ -n "$facility_level" ]; then
-		for f in $facility_level; do
-			if [ "$f" = "24" ]; then
-				all_facilities=1
-				# xargs is used to convert from new line separated numbers to space separated numbers
-				facilities="$(seq 0 23 | xargs)"
-				break
-			fi
-
-			if [ "$f" = "0" ]; then
-				kern_facility=1
-			fi
-		done
-
-		if [ "$all_facilities" -eq 0 ]; then
-			facilities="$facility_level"
-		fi
-	else
-		# default to "all facilities" when unset
-        	all_facilities=1
-	        facilities="$(seq 0 23 | xargs)"
-	fi
-
-	# normalize severities
-	case "$sev_level" in
-		8)  	# all severities
-			severities="$(seq 0 7 | xargs)"
-			;;
-		9)  	# none
-			severities="none"
-			;;
-		"") 	# unset, treat as "all"
-			severities="$(seq 0 7 | xargs)"
-			;;
-		*)
-			if [ "$sev_compare" = "0" ]; then
-				# equal
-				severities="$sev_level"
-			else
-				# equl or higher
-				severities="$(seq 0 $sev_level | xargs)"
-			fi
-			;;
-	esac
-}
-
-create_filter_section() {
-	local match_regex="$1"
-	local pattern="$2"
-
-	[ -z "$match_regex" ] && return
-
-	append_conf "[FILTER]"
-	append_conf "    name        grep"
-	append_conf "    match_regex       $match_regex"
-
-	# we need "logical_op or" only in non-pattern sections
-	if [ "$pattern" = "0" ]; then
-		append_conf "    logical_op  or" # handle multiple filters
-	fi
-}
-
-create_kmsg_input_section() {
-	local tag="$1"
-	local max_sev=7
-
-	[ -z "$tag" ] && return
-	kmsg_tag_already_processed "$tag" && return
-
-	if [ -c "/dev/kmsg" ]; then
-		append_conf "[INPUT]"
-		append_conf "    name       kmsg"
-		append_conf "    tag        $tag"
-
-		# check kern facility (0)
-		if [ "$all_facilities" -eq 1 ] || [ "$kern_facility" -eq 1 ]; then
-			if [ "$severities" != "none" ]; then
-				# severity filtering
-				# only EqualOrHigher is supported by Prio_Level
-				# and only Log action is supported
-				# so set Prio_Level = max severity
-				if [ "$sev_action" = "0" ] && [ "$sev_compare" = "1" ]; then
-					if [ -n "$severities" ]; then
-						max_sev=$(echo $severities | tr ' ' '\n' | sort -n | tail -1)
-					fi
-
-					append_conf "    prio_level $max_sev"
-				fi
-			fi
-		fi
-
-		append_conf ""
-
-		# if severities is none, or
-		# if kern facility has been excluded
-		# then we need to stop kernel logs
-		# sev_action and sev_compare is being checked because we don't want to work with rules that exclude logs
-		if [ "$severities" = "none" ] || { [ "$kern_facility" -eq 0 ] && [ "$all_facilities" -eq 0 ] && [ "$sev_action" = "0" ] && [ "$sev_compare" = "1" ]; }; then
-			# block all
-			# create a filter section that matches on KM* tag
-			# and excludes all messages
-			create_filter_section "KM*" "0"
-			append_conf "    exclude    message ^.*$"
-			append_conf ""
-		fi
-	fi
-}
-
-generate_syslog_filter() {
-	local param="regex"
-
-	[ "$sev_action" = "1" ] && param="exclude"
-
-	# start adding the fluent-bit filter section
-	create_filter_section "SL*" "0"
-
-	if [ "$severities" = "none" ]; then
-		append_conf "    exclude    pri ^.*$"
+	if [ "$facility_level" == "24" ]; then
+		# value 24 means all facility level, which is as good as not
+		# generating a filter section, so return
 		return
 	fi
 
-	for fval in $facilities; do
-		for sval in $severities; do
-			local pri=$((fval * 8 + sval))
-			append_conf "    $param        pri ^${pri}$"
+	# facility_level is a list value, hence, generate regex for
+	# each value
+	IFS=" "
+	for val in $facility_level; do
+		# as per rfc 5424 and 3164, pri in syslog msg is
+		# facility*8+severity. Severity value can range from 0-7 hence
+		# generate regex for each.
+		for sval in 0 1 2 3 4 5 6 7; do
+			pri=`expr $val \* 8 + $sval`
+			echo "    regex        pri $pri" >> ${TMP_CONF_FILE}
 		done
 	done
-
-	append_conf ""
 }
 
-generate_pattern_filter() {
-	local match_regex="$1"
-	local match_pattern="$2"
+generate_severity_regex() {
+	local sev_level="$1"
+	local sev_compare="$2"
+	local sev_action="$3"
 
-	[ -z "$match_regex" ] && return
-	[ -z "$match_pattern" ] && return
+	local pri=0
+	local param="exclude"
 
-	# start adding the fluent-bit filter section
-	create_filter_section "$match_regex" "1"
-	append_conf "    regex        message $match_pattern"
-	append_conf ""
+	if [ "$sev_action" == "0" ]; then
+		param="regex"
+	fi
+
+	local fval=0
+	if [ "$sev_compare" == "0" ]; then
+		# generate regex for all facility values, with severity=sev_level
+		while [ $fval -le 23 ] ; do
+			pri=`expr $fval \* 8 + $sev_level`
+			echo "    $param        pri $pri" >> ${TMP_CONF_FILE}
+			fval=$((fval + 1))
+		done
+	elif [ "$sev_compare" == "1" ]; then
+		# generate regex for all severity value greater than or equal to
+		# sev_level. please, lower value have higher precedence, so sev_level
+		# 0 which is emergency has higher precedence than error which is 3
+		while [ $fval -le 23 ] ; do
+			sval=0
+			while [ $sev_level -ge $sval ]; do
+				pri=`expr $fval \* 8 + $sval`
+				echo "    $param        pri $pri" >> ${TMP_CONF_FILE}
+				sval=$((sval + 1))
+			done
+			fval=$((fval + 1))
+		done
+	fi
+}
+
+handle_filter_conf() {
+	local section="$1" # config filter
+	local filter_name="$2"
+	local name
+
+	# no need to proceed if name of filter section is not one of the values
+	# listed in option filter in config action section
+	config_get name $section name
+	if [ "$name" != "$filter_name" ]; then
+		return
+	fi
+
+	# as per data model, at a time either facility_level or severity_level can
+	# be specified along with pattern_match. hence, first process and generate
+	# regex for pattern_match which is common in both condition. Next, we will
+	# process facility_level and return if facility level is defined and not
+	# process severity related params at all.
+
+	local pattern_match
+	config_get pattern_match $section pattern_match
+	if [ -n "$pattern_match" ]; then
+		echo "    regex        $pattern_match" >> ${TMP_CONF_FILE}
+	fi
+
+	local facility_level
+	config_get facility_level $section facility_level
+
+	if [ -n "$facility_level" ]; then
+		generate_facility_regex $facility_level
+		# return from here since if facility_level is defined, then no
+		# need to process severity_level
+		return
+	fi
+
+	local sev_level
+	local sev_compare
+	local sev_action
+	config_get sev_level $section severity_level
+
+	if [ -n "$sev_level" ]; then
+		# value 1 of severity compare corresponds to data model
+		# and system default which is EqualorHigher
+		config_get sev_compare $section severity_compare 1
+		# value 0 of severity action corresponds to data model
+		# and system default that is log
+		config_get sev_action $section severity_action 0
+
+		generate_severity_regex $sev_level $sev_compare $sev_action
+	fi
+}
+
+create_filter_section() {
+	local match="$1"
+
+	echo "[FILTER]" >> ${TMP_CONF_FILE}
+	echo "    name        grep" >> ${TMP_CONF_FILE}
+	echo "    match       $match" >> ${TMP_CONF_FILE}
+	echo "    logical_op  or" >> ${TMP_CONF_FILE} # handle multiple filters
+}
+
+handle_filter_ref() {
+	local filter_name="$1"
+	config_foreach handle_filter_conf filter "$filter_name"
 }
 
 handle_log_file() {
 	local section="$1" # out_file section
-	local linker="$2"
-	local match_regex="$3"
-	local template="$4"
+	local match="$2"
 	local action_ref
 
 	config_get action_ref $section action
-	if [ "$action_ref" != "$linker" ]; then
+	if [ "$action_ref" != "$match" ]; then
 		return
 	fi
 
 	local enabled
-	config_get_bool enabled $section enable
-	if [ "$enabled" = "0" ]; then
+	config_get enabled $section enable
+	if [ "$enabled" == 0 ]; then
 		return
 	fi
 
 	local file
 	config_get file $section file
-	if [ -z "$file" ] || [ -z "$match_regex" ]; then
+	if [ -z "$file" ]; then
 		return
 	fi
 
-	append_conf "[OUTPUT]"
-	append_conf "    name         file"
-	append_conf "    workers      2"
-	append_conf "    match_regex  $match_regex"
-	append_conf "    file         $file"
-
-
-	if [ -n "$template" ]; then
-		append_conf "    format       template"
-		append_conf "    template     ${template}"
-	fi
-
-	append_conf ""
+	echo "[OUTPUT]" >> ${TMP_CONF_FILE}
+	echo "    name         file" >> ${TMP_CONF_FILE}
+	echo "    match        $match" >> ${TMP_CONF_FILE}
+	echo "    file         $file" >> ${TMP_CONF_FILE}
+	echo "    format       template" >> ${TMP_CONF_FILE}
+	echo "    template     {time} {hostname} {ident}: {message}" >> ${TMP_CONF_FILE}
 }
 
 handle_log_remote() {
 	local section="$1"
-	local linker="$2"
-	local match_regex="$3"
+	local match="$2"
 	local action_ref
 
 	config_get action_ref $section action
-	if [ "$action_ref" != "$linker" ]; then
+	if [ "$action_ref" != "$match" ]; then
 		return
 	fi
 
 	local enabled
-	config_get_bool enabled $section enable
-	if [ "$enabled" = "0" ]; then
+	config_get enabled $section enable
+	if [ "$enabled" == 0 ]; then
 		return
 	fi
 
@@ -330,167 +218,83 @@ handle_log_remote() {
 		return
 	fi
 
-	append_conf "[OUTPUT]"
-	append_conf "    name         syslog"
-	append_conf "    match_regex  $match_regex"
-	append_conf "    host         $address"
+	echo "[OUTPUT]" >> ${TMP_CONF_FILE}
+	echo "    name         syslog" >> ${TMP_CONF_FILE}
+	echo "    match        $match" >> ${TMP_CONF_FILE}
+	echo "    host         $address" >> ${TMP_CONF_FILE}
 	append_conf "    syslog_appname_key   ident"
 	append_conf "    syslog_procid_key    pid"
 	append_conf "    syslog_message_key   message"
-	append_conf "    syslog_hostname_key  hostname"
+
+	local hostname="$(uci -q get 'system.@system[0].hostname')"
+	if [ -n "${hostname}" ]; then
+		append_conf "    syslog_hostname_preset    ${hostname}"
+	fi
 
 	local proto # holds value tcp or udp
 	config_get proto ${section} proto
 	if [ -n "$proto" ]; then
 		if [ "$proto" == "tls" ]; then
-			append_conf "    mode         tcp"
-			append_conf "    tls          on"
+			echo "    mode         tcp" >> ${TMP_CONF_FILE}
+			echo "    tls          on" >> ${TMP_CONF_FILE}
 		else
-			append_conf "    mode         $proto"
+			echo "    mode         $proto" >> ${TMP_CONF_FILE}
 		fi
 	fi
 
 	local port
 	config_get port $section port
 	if [ -n "$port" ]; then
-		append_conf "    port         $port"
+		echo "    port         $port" >> ${TMP_CONF_FILE}
 	fi
 
 	local cert
 	local peer_verify
 	config_get cert $section cert
 	if [ -n "$cert" ]; then
-		append_conf "    tls.crt_file $cert"
+		echo "    tls.crt_file $cert" >> ${TMP_CONF_FILE}
 
-		config_get_bool peer_verify $section peer_verify
-		if [ "$peer_verify" = "1" ]; then
-			append_conf "    tls.verify     on"
+		config_get peer_verify $section peer_verify
+		if [ "$peer_verify" == "1" ]; then
+			echo "    tls.verify     on" >> ${TMP_CONF_FILE}
 		fi
 	fi
-	append_conf ""
-}
-
-resolve_source_section() {
-	local src_section="$1"
-	local linker="$2"
-	local src_name syslog_en kernel_en
-
-	config_get src_name "$src_section" name
-	[ "$src_name" = "$linker" ] || return
-
-	config_get_bool syslog_en "$src_section" system_messages 1
-	config_get_bool kernel_en "$src_section" kernel_messages 1
-
-	# create an input section using /dev/log or kmsg
-	# and store the tag in a variable
-	# so that later a regex can be made to match this tag
-	# which will be used in output section
-	if [ "$syslog_en" = "1" ]; then
-		source_tag_syslog="SL$src_name"
-		create_input_section "$source_tag_syslog"
-	fi
-
-	if [ "$kernel_en" = "1" ]; then
-		source_tag_kmsg="KM$src_name"
-		create_kmsg_input_section "$source_tag_kmsg"
-	fi
-}
-
-# get the value of option expression from the relevant section
-resolve_template_section() {
-	local tmpl_section="$1"
-	local tmpl_name
-
-	config_get tmpl_name "$tmpl_section" name
-	[ "$tmpl_name" = "$template_ref" ] || return
-
-	config_get template_expr "$tmpl_section" expression
-
-	[ -n "$template_expr" ] && echo "$template_expr"
-}
-
-# loop over template sections and get the value of option expression from the relevant section
-get_template_expression() {
-	local template_ref="$1"
-	[ -n "$template_ref" ] && config_foreach resolve_template_section template
-}
-
-# build a regex that will match all the tags supplied to this function
-build_match_regex() {
-	local tags="$1"
-	local first=1
-	local regex="^("
-	for tag in $tags; do
-		[ "$first" -eq 1 ] && first=0 || regex="$regex|"
-		regex="$regex$tag"
-	done
-	regex="$regex)\$"
-	echo "$regex"
-}
-
-handle_filter_conf() {
-	local section="$1" # config filter
-	local filter_name="$2"
-	local name
-
-	config_get name $section name
-	[ "$name" = "$filter_name" ] || return
-
-	populate_allowed_logs "$filter_name"
 }
 
 handle_action() {
-	local tag_regex filter source_ref template_ref source_sec log_template finst
-	local action_section="$1"
-	local source_tag_syslog source_tag_kmsg
+	local section="$1"
 
-	# shared variables set by populate_allowed_logs
-	match_pattern=""
-	facilities=""
-	all_facilities=0
-	kern_facility=1
-	severities=""
-	sev_compare=1
-	sev_action=0
+	local filter
+	config_get filter $section filter
 
-	config_get action_name "$action_section" name
-	config_get filter "$action_section" filter
-	config_get source_ref "$action_section" source
-	config_get template_ref "$action_section" template
+	# use config action option name as tag for input
+	local tag
+	config_get tag $section name
+	if [ -z "$tag" ]; then
+		return
+	fi
 
-	[ -z "$action_name" ] && return
-	[ -z "$source_ref" ] && return
-
-	# read filter section and populate relevant variables
-	# these variables will be used by create_kmsg_input_section
-	# generate_syslog_filter, and generate_pattern_filter functions
+	create_input_section $tag
 	if [ -n "$filter" ]; then
+		# the only fluentbit filter that is useful for the datamodel is
+		# grep. Also, fluentbit does not seem to handle multiple instances
+		# of FILTER of same kind. Hence, each filter section corresponding
+		# to an action entry in the uci would translate for us into a set of
+		# regex/exclude values instead of individual FILTER section per uci
+		# section filter is a list, treat according
+		create_filter_section $tag
+
+		IFS=" "
 		for finst in $filter; do
-			config_foreach handle_filter_conf filter "$finst"
+			handle_filter_ref $finst
 		done
 	fi
 
-	# Resolve referenced source sections
-	for source_sec in $source_ref; do
-		config_foreach resolve_source_section source "$source_sec"
-	done
-
-	# build a regex that will match all the sources for this action
-	tag_regex=$(build_match_regex "$source_tag_syslog $source_tag_kmsg")
-
-	if [ -n "$filter" ]; then
-		generate_pattern_filter "$tag_regex" "$match_pattern"
-		generate_syslog_filter
-	fi
-
-	# get the template expression if any is present
-	log_template="$(get_template_expression "$template_ref")"
-
-	# handle output, each action can be associated with an out_log and out_syslog
+	# handle output, each action can be associated with a out_log and out_syslog
 	# section so figure out if any out_log or out_syslog section is associated
 	# with this and action and setup output accordingly.
-	config_foreach handle_log_file log_file "$action_name" "$tag_regex" "$log_template"
-	config_foreach handle_log_remote log_remote "$action_name" "$tag_regex"
+	config_foreach handle_log_file log_file "$tag"
+	config_foreach handle_log_remote log_remote "$tag"
 }
 
 handle_action_section() {
@@ -506,14 +310,13 @@ logmngr_init() {
 
 	create_config_file
 	create_service_section
-	create_default_filters
 	handle_action_section
 
 	if [ -f /lib/logmngr/logrotate.sh ]; then
 		logrotate_init
 	fi
 
-	if [ "$enabled" = "0" ]; then
+	if [ "$enabled" == "0" ]; then
 		return
 	fi
 
@@ -527,4 +330,9 @@ logmngr_init() {
 	fi
 	procd_set_param respawn
 	procd_close_instance
+
+	procd_open_instance klogd
+	procd_set_param command /usr/libexec/logmngr-klogd
+	procd_set_param respawn
+	procd_close_instance
 }

logmngr/files/lib/logmngr/logrotate.sh

@@ -4,14 +4,11 @@
 
 LOGROTATE_FILE=/etc/logrotate.conf
 LOGROTATE_TMP_FILE=/tmp/logrotate/logrotate.conf
-CONF_DIR=/etc/logrotate.d
 
 create_logrotate_file() {
 	mkdir -p /tmp/logrotate
 	rm -f ${LOGROTATE_TMP_FILE}
 	touch ${LOGROTATE_TMP_FILE}
-	echo -e "include ${CONF_DIR}" >> ${LOGROTATE_TMP_FILE}
-	echo -e "" >> ${LOGROTATE_TMP_FILE}
 }
 
 handle_logrotate() {

logmngr/files/logmngr-klogd

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+until [ -S /dev/log ]; do
+	sleep 1
+done
+
+exec /sbin/klogd -n

map-agent/Config.in

@@ -55,10 +55,6 @@ config AGENT_OPER_CHANNEL_CHANGE_RELAY_MCAST
 config AGENT_USE_LIBDPP
 	bool "Depend on libdpp for DPP EasyConnect"
 
-config AGENT_ZEROTOUCH_DPP
-	bool "Enable Zero-touch DPP bootstrapping. Depends on libztdpp.so"
-	default n
-
 config AGENT_CHECK_PARTIAL_WIFI_RELOAD
 	bool "Option that allow SSID/PSK simple reload"
 	default y

map-agent/Makefile

@@ -1,14 +1,13 @@
 #
-# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis Sweden AB
+# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=6.3.7.0
+PKG_VERSION:=6.3.5.3
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=ab9fa6ffc6978c84ab9a3b410d31c71c3b185430
+PKG_SOURCE_VERSION:=a2cc8dde8da330c2e78e186174db45ba36681b6a
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
@@ -27,7 +26,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/map-agent
   SECTION:=utils
   CATEGORY:=Utilities
-  TITLE:=Wi-Fi Multi-AP Agent (EasyMesh R6)
+  TITLE:=WiFi multi-AP Agent (EasyMesh R2)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
 	   +ieee1905-map-plugin +ip-bridge +AGENT_USE_LIBDPP:libdpp \
 	   +uuidgen +openssl-util +!TARGET_brcmbca:ebtables-legacy \
@@ -46,12 +45,9 @@ define Package/dynbhd
 	  +ieee1905-map-plugin +map-agent
 endef
 
-ifeq ($(CONFIG_AGENT_ZEROTOUCH_DPP),y)
-  TARGET_CFLAGS += -DZEROTOUCH_DPP
-endif
 
 define Package/map-agent/description
-  This package provides EasyMesh R6 compliant Wi-Fi Multi-AP Agent.
+ This package implements EasyMesh R2 compliant WiFi Agent.
 endef
 
 define Package/dynbhd/description

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -61,14 +61,6 @@ remove_from_bridge() {
 	[ -n "$ifname" ] && brctl delif ${al_bridge} ${ifname}
 }
 
-get_network_id() {
-	local ifname=$1
-
-	[ -n "$ifname" ] || return
-	network_id=$(wpa_cli -i $ifname list_n|tail -n 1 | awk '{print $1}')
-	echo ${network_id}
-}
-
 update_bstas() {
 	section="$1"
 	action="$2"
@@ -76,15 +68,14 @@ update_bstas() {
 	config_get ifname "$section" ifname
 	config_get_bool enabled "$section" enabled 0
 
-	network_id=$(get_network_id $ifname)
 	if [ "$action" = "down" ]; then
 		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" disable_network $network_id  > /dev/null 2>&1
+		wpa_cli -i "$ifname" disable_network 0  > /dev/null 2>&1
 #		wpa_cli -i "$ifname" save_config  > /dev/null 2>&1
 	elif [ "$action" = "up" ]; then
 		[ "$enabled" -eq 0 ] && return
 		wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" enable_network $network_id  > /dev/null 2>&1
+		wpa_cli -i "$ifname" enable_network 0  > /dev/null 2>&1
 #		wpa_cli -i "$ifname" save_config  > /dev/null 2>&1
 	fi
 }

map-agent/files/etc/init.d/mapagent

@@ -203,7 +203,7 @@ start_service() {
 
 	procd_open_instance
 	create_dir
-	procd_set_param command "/usr/sbin/mapagent" "-d" "-o" "/tmp/mapagent.log" "-f"
+	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1

map-agent/files/lib/multiap/map_genconfig

@@ -44,16 +44,19 @@ generate_multiap_config() {
 			2g)
 				mode_band=2
 				priority=2
+				dpp_chan="81/1"
 				channels="1 6 11"
 			;;
 			5g)
 				mode_band=5
 				priority=1
+				dpp_chan="128/36"
 				channels="36-64 100-112"
 			;;
 			6g)
 				mode_band=6
 				priority=0
+				dpp_chan="133/49"
 			;;
 		esac
 
@@ -155,17 +158,13 @@ generate_multiap_config() {
 				uci set mapagent.@bsta[-1].band="$mode_band"
 				uci set mapagent.@bsta[-1].priority="$priority"
 
-				# add dpp_chirp section for 2.4GHz bSTA
-				if [ $mode_band -eq 2 ]; then
-					uci add mapagent dpp_chirp
-					uci set mapagent.@dpp_chirp[-1].type="qrcode"
-					uci set mapagent.@dpp_chirp[-1].device="$device"
-					uci set mapagent.@dpp_chirp[-1].ifname="$ifname"
-					uci set mapagent.@dpp_chirp[-1].band="$mode_band"
-					for channel in $channels; do
-						uci add_list mapagent.@dpp_chirp[-1].channel="$channel"
-					done
-				fi
+				#uci add mapagent dpp_uri
+				#uci set mapagent.@dpp_uri[-1].type="qrcode"
+				#uci set mapagent.@dpp_uri[-1].device="$device"
+				#uci set mapagent.@dpp_uri[-1].ifname="$ifname"
+				#uci set mapagent.@dpp_uri[-1].band="$mode_band"
+				#uci set mapagent.@dpp_uri[-1].chirp_interval="10"
+				#uci add_list mapagent.@dpp_uri[-1].dpp_chan="$dpp_chan"
 
 				if [ $generate_wireless_sta_config -eq 1 ]; then
 					secname="default_sta_${device}"
@@ -259,6 +258,6 @@ map_genconf () {
 				config_foreach mapcontroller_remove_mld_id ap
 			}
 		fi
-		ubus -t 5 call uci commit '{"config":"mapcontroller"}'
+		uci -q commit mapcontroller
 	fi
 }

map-controller/Config.in

@@ -39,10 +39,6 @@ config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
 config CONTROLLER_USE_LIBDPP
 	bool "Depend on libdpp for DPP EasyConnect"
 
-config CONTROLLER_ZEROTOUCH_DPP
-	bool "Enable Zero-touch DPP bootstrapping via passphrase."
-	default n
-
 config CONTROLLER_PROPAGATE_PROBE_REQ
 	depends on CONTROLLER_EASYMESH_VENDOR_EXT
 	bool "Enable publishing probe requests vendor specific messages as UBUS events"

map-controller/Makefile

@@ -6,9 +6,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=6.4.4.0
+PKG_VERSION:=6.3.0.17
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=d2e91ca156dbe0b44f0fc551b0a353137343fdf1
+PKG_SOURCE_VERSION:=7f55e5705fee1b879d651bbba872ec5d7152d5ab
 PKG_MAINTAINER:=Jakob Olsson <jakob.olsson@genexis.eu>
 
 LOCAL_DEV=0
@@ -36,9 +36,6 @@ ifeq ($(CONFIG_CONTROLLER_USE_LIBDPP),y)
   TARGET_CFLAGS += -DUSE_LIBDPP
 endif
 
-ifeq ($(CONFIG_CONTROLLER_ZEROTOUCH_DPP),y)
-  TARGET_CFLAGS += -DZEROTOUCH_DPP
-endif
 
 define Package/map-controller/description
  This package provides WiFi MultiAP Controller as per the EasyMesh-R2 specs.
@@ -77,30 +74,12 @@ ifeq ($(CONFIG_CONTROLLER_PROPAGATE_PROBE_REQ),y)
 TARGET_CFLAGS += -DPROPAGATE_PROBE_REQ
 endif
 
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/map-controller
-	$(INSTALL_DIR) $(1)/usr/include/map-controller/utils
-	$(CP) $(PKG_BUILD_DIR)/src/wifi_dataelements.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/cntlr_commands_impl.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/cntlr_commands.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/cntlr_apis.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/cntlr_plugin.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/wifi_opclass.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/steer_module.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/timer.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/map-controller
-	$(CP) $(PKG_BUILD_DIR)/src/utils/debug.h $(1)/usr/include/map-controller/utils
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/libcntlr-apis.so $(1)/usr/lib
-endef
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapcontroller $(1)/usr/sbin/
 	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/src/libcntlr-apis.so $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/src/plugins/steer/rcpi/rcpi.so $(1)/usr/lib/mapcontroller/rcpi.so
 endef
 

map-controller/files/etc/config/mapcontroller

@@ -2,17 +2,18 @@ config controller 'controller'
 	option enabled '1'	# may be modified by other package start-up scripts (i.e. map-agent)
 	option profile '3'
 	option registrar '2 5 6'
-	option debug '2'
+	option debug '0'
 	option bcn_metrics_max_num '10'
 	option initial_channel_scan '0'
 	option enable_ts '0'
 	option primary_vid '1'
 	option primary_pcp '0'
+	option allow_bgdfs '0'
 	option stale_sta_timeout '30d'
+	option channel_plan '0'
 	option de_collect_interval '60'
-	list plugin 'zerotouch'
 
-config sta_steering 'sta_steering'
+config sta_steering
 	option enable_sta_steer '1'
 	option enable_bsta_steer '0'
 	option rcpi_threshold_2g '70'
@@ -24,12 +25,6 @@ config sta_steering 'sta_steering'
 	option plugins_enabled '1'
 	option plugins_policy 'any'
 	list plugins 'rcpi'
-	list plugins 'rate'
-	list plugins 'bsteer'
-
-config channel_plan 'channel_plan'
-	option preclear_dfs '0'
-	option acs '0'
 
 ###################
 # Default AP sections credentials will by updated

map-controller/files/etc/init.d/mapcontroller

@@ -71,7 +71,7 @@ validate_ap_section() {
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes",
 				"none", "psk-mixed", "psk-mixed+aes",
-				"psk", "psk+aes", "wpa", "wpa2", "wpa-mixed")' \
+				"psk", "psk+aes")' \
 			'key:string' \
 			'vid:range(1,65535):1' \
 			'type:or("backhaul", "fronthaul", "combined")' \

map-controller/files/etc/uci-defaults/99-mapcntlr-uci-rename-singletons

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-cfg=mapcontroller
-
-# singleton sections
-sections="channel_plan sta_steering"
-
-for sec in $sections; do
-    # find unnamed section of given type, only index 0
-    s=$(uci show $cfg | grep -oE "@${sec}\[0\]" | sort -u)
-    [ "$s" = "" ] && continue
-
-    uci rename $cfg.$s=$sec
-done
-
-uci commit $cfg

map-plugins/Config.in

@@ -1,11 +0,0 @@
-if (PACKAGE_map-plugins)
-
-menu "Options"
-
-config STEER_RATE_PLUGIN
-	bool "STA steering based on estimated throughput of target-AP"
-	default PACKAGE_map-plugins-steer-rate
-
-endmenu
-
-endif

map-plugins/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2025 Genexis Sweden AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=map-plugins
-PKG_VERSION:=1.1.2
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a76610182366cf05ed7e8f5fbac26890b709eeb4
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/map-plugins.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=PROPRIETARY GENEXIS
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_CONFIG_DEPENDS := CONFIG_PACKAGE_mapcontroller
-PKG_BUILD_DEPENDS := map-controller
-
-include $(INCLUDE_DIR)/package.mk
-
-include $(wildcard plugins/*.mk)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall"
-
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugins-steer-rate),steer-rate)   \
-	$(if $(CONFIG_PACKAGE_map-plugins-bsteer),bsteer) \
-	$(if $(CONFIG_PACKAGE_map-plugins-zero-touch),zero-touch)
-
-ppkg:=$(patsubst plugins/%.mk,map-plugins-%,$(wildcard plugins/*.mk))
-
-define Package/map-plugins/Default
-	SECTION:=utils
-	CATEGORY:=Utilities
-	SUBMENU:=Multi-AP value added services
-endef
-
-define Package/map-plugins/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/map-plugins
-	$(call Package/map-plugins/Default)
-	TITLE:=Multi-AP plugins modules
-	DEPENDS+=+libeasy +libwifiutils +map-controller
-endef
-
-define Package/map-plugins/description
-	Provides extra Multi-AP services viz. steering, channel-planning, self-organizing network etc.
-endef
-
-define Package/map-plugins/install
-	:
-endef
-
-define Build/Compile
-	$(foreach p,$(plugins),$(call Build/Compile/map-plugins-$(p), $(1)))
-endef
-
-$(eval $(call BuildPackage,map-plugins))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))

map-plugins/plugins/bsteer.mk

@@ -1,20 +0,0 @@
-define Package/map-plugins-bsteer
-	$(call Package/map-plugins/Default)
-	TITLE:=Wi-Fi backhaul steering plugin based on maximizing backhaul throughput
-	DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-		 +libjson-c +libblobmsg-json +map-controller \
-		 +map-plugins
-endef
-
-define Package/map-plugins-bsteer/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/steer/bsteer/bsteer.so $(1)/usr/lib/mapcontroller/bsteer.so
-endef
-
-define Build/Compile/map-plugins-bsteer
-	$(MAKE) -C $(PKG_BUILD_DIR)/steer/bsteer \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS)" \
-		LDFLAGS="$(TARGET_LDFLAGS)";
-endef

map-plugins/plugins/steer-rate.mk

@@ -1,20 +0,0 @@
-define Package/map-plugins-steer-rate
-	$(call Package/map-plugins/Default)
-	TITLE:=STA steering based on estimated throughput of target-AP
-	DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-		 +libjson-c +libblobmsg-json +map-controller \
-		 +map-plugins
-endef
-
-define Package/map-plugins-steer-rate/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/steer/rate/rate.so $(1)/usr/lib/mapcontroller/rate.so
-endef
-
-define Build/Compile/map-plugins-steer-rate
-	$(MAKE) -C $(PKG_BUILD_DIR)/steer/rate \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS)" \
-		LDFLAGS="$(TARGET_LDFLAGS)";
-endef

map-plugins/plugins/zero-touch.mk

@@ -1,22 +0,0 @@
-define Package/map-plugins-zero-touch
-	$(call Package/map-plugins/Default)
-	TITLE:=Full Zero-touch bootstrapping of Wi-Fi Repeater device(s)
-	DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-		 +libjson-c +libblobmsg-json +map-controller \
-		 +map-plugins
-endef
-
-define Package/map-plugins-zero-touch/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/zero-touch/zerotouch.so $(1)/usr/lib/mapcontroller/zerotouch.so
-	$(CP) $(PKG_BUILD_DIR)/zero-touch/libztdpp.so $(1)/usr/lib/libztdpp.so
-
-endef
-
-define Build/Compile/map-plugins-zero-touch
-	$(MAKE) -C $(PKG_BUILD_DIR)/zero-touch \
-		CC="$(TARGET_CC)" \
-		CFLAGS="$(TARGET_CFLAGS)" \
-		LDFLAGS="$(TARGET_LDFLAGS)";
-endef

mcastmngr/files/common/etc/uci-defaults/61-mcast_config_generate

@@ -65,69 +65,12 @@ generate_igmp_proxy_config(){
 	uci add_list mcast.@proxy[-1].filter="239.0.0.0/8"
 }
 
-generate_mld_snooping_config(){
-	local u_itf="$1"
-
-	uci add mcast snooping
-	uci rename mcast.@snooping[-1]="mc_snooping_MLD"
-	uci set mcast.@snooping[-1].enable="1"
-	uci set mcast.@snooping[-1].proto="mld"
-	uci set mcast.@snooping[-1].version="2"
-	uci set mcast.@snooping[-1].robustness="2"
-	uci set mcast.@snooping[-1].query_interval="125"
-	uci set mcast.@snooping[-1].query_response_interval="100"
-	uci set mcast.@snooping[-1].last_member_query_interval="10"
-	uci set mcast.@snooping[-1].fast_leave="1"
-	uci set mcast.@snooping[-1].snooping_mode="2"
-	uci set mcast.@snooping[-1].interface="$u_itf"
-}
-
-generate_igmp_snooping_config(){
-	local u_itf="$1"
-
-	uci add mcast snooping
-	uci rename mcast.@snooping[-1]="igmp_snooping_1"
-	uci set mcast.@snooping[-1].enable="1"
-	uci set mcast.@snooping[-1].proto="igmp"
-	uci set mcast.@snooping[-1].version="2"
-	uci set mcast.@snooping[-1].robustness="2"
-	uci set mcast.@snooping[-1].query_interval="125"
-	uci set mcast.@snooping[-1].query_response_interval="100"
-	uci set mcast.@snooping[-1].last_member_query_interval="10"
-	uci set mcast.@snooping[-1].fast_leave="1"
-	uci set mcast.@snooping[-1].snooping_mode="2"
-	uci set mcast.@snooping[-1].interface="$u_itf"
-
-	uci add_list mcast.@snooping[-1].filter="239.0.0.0/8"
-}
-
-check_wan_bridge() {
-	local config="$1"
-	local wan_device="$2"
-	local name type
-
-	[ $((is_wan_bridge)) -ne 0 ] && return
-
-	config_get type "$config" type
-	config_get name "$config" name
-
-	[ "$type" = "bridge" -a "$wan_device" = "$name" ] && is_wan_bridge=1
-}
-
 generate_mcast_config(){
-	local up_itf="$(uci -q get network.wan.device)"
-	local is_wan_bridge=0
 
-	config_load network
-	config_foreach check_wan_bridge device "$up_itf"
+	up_itf="$(uci -q get network.wan.device)"
 
-	if [ $((is_wan_bridge)) -eq 0 ]; then
-		generate_igmp_proxy_config "$up_itf"
-		generate_mld_proxy_config "$up_itf"
-	else
-		generate_igmp_snooping_config "$up_itf"
-		generate_mld_snooping_config "$up_itf"
-	fi
+	generate_igmp_proxy_config "$up_itf"
+	generate_mld_proxy_config "$up_itf"
 }
 
 interfaces_ok(){

mcastmngr/files/linux/etc/firewall.mcast

@@ -1,140 +1,2 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-ZONE_NAME_FILE="/tmp/mcast_fw_zone"
-
-log() {
-	echo "${@}"|logger -t firewall.mcast -p info
-}
-
-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_load firewall
-	config_foreach collect_zone_name zone
-}
-
-get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-
-	echo "${name}"
-}
-
-# Get interface name for a device (e.g., br-lan -> lan)
-find_interface_for_device() {
-	local dev="${1}"
-	local intf=""
-	local intf_dump idx
-
-	if [ -z "${dev}" ]; then
-		echo ""
-		return
-	fi
-
-	intf_dump="$(ubus -t 5 call network.interface dump)"
-	if [ -z "${intf_dump}" ]; then
-		echo ""
-		return
-	fi
-
-	json_load "${intf_dump}"
-	json_select interface
-	if [ "$?" -ne 0 ]; then
-		echo ""
-		return
-	fi
-
-	idx=1
-	while json_is_a ${idx} object; do
-		json_select ${idx}
-		if [ "$?" -ne 0 ]; then
-			break
-		fi
-
-		json_get_var device device
-		if [ "${device}" = "${dev}" ]; then
-			json_get_var intf interface
-			break
-		fi
-
-		idx=$(( idx + 1 ))
-		json_select ..
-	done
-
-	echo "${intf}"
-}
-
-# Setup iptables rule to allow multicast from upstream to downstream
-setup_multicast_rule() {
-	local upstream_dev="$1"
-	local downstream_dev="$2"
-	local upstream_zone downstream_zone
-	local upstream_iface downstream_iface
-
-	upstream_iface=$(find_interface_for_device "$upstream_dev")
-	downstream_iface=$(find_interface_for_device "$downstream_dev")
-
-	[ -z "$upstream_iface" ] || [ -z "$downstream_iface" ] && {
-		log "Failed to map devices to interfaces"
-		return
-	}
-
-	upstream_zone=$(get_firewall_zone "$upstream_iface")
-	downstream_zone=$(get_firewall_zone "$downstream_iface")
-
-	[ -z "$upstream_zone" ] || [ -z "$downstream_zone" ] && {
-		log "Failed to map interfaces to zones"
-		return
-	}
-
-	iptables -w -t filter -A zone_${upstream_zone}_forward -p udp \
-	  -d 224.0.0.0/240.0.0.0 \
-	  -m comment --comment "!fw3: Allow-Multicast-UDP" \
-	  -j zone_${downstream_zone}_dest_ACCEPT
-}
-
-apply_mcast_rule() {
-	local cfg="$1"
-	local up down proto
-
-	config_get proto "$cfg" proto
-	[ "$proto" = "igmp" ] || return
-
-	config_get up "$cfg" upstream_interface
-	config_get down "$cfg" downstream_interface
-
-	[ -n "$up" ] && [ -n "$down" ] && setup_multicast_rule "$up" "$down"
-}
-
-add_multicast_rules() {
-	config_load mcast
-	config_foreach apply_mcast_rule proxy
-}
-
-load_zone_names
-
-add_multicast_rules
-
-rm -f "${ZONE_NAME_FILE}"
+# Forward multicast packets from wan to lan
+iptables -w -t filter -A zone_wan_forward -p udp -d 224.0.0.0/240.0.0.0 -m comment --comment "!fw3: Allow-Multicast-UDP" -j zone_lan_dest_ACCEPT

mosquitto-auth-shadow/Config.in

@@ -1,7 +0,0 @@
-if PACKAGE_mosquitto-auth-shadow
-
-config MOSQUITTO_AUTH_PAM_SUPPORT
-	bool "Enable support of Linux PAM module for Authentication"
-	default y
-
-endif

mosquitto-auth-shadow/Makefile

@@ -14,13 +14,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=mosquitto-auth-shadow
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.0.1
 
 PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
 PKG_LICENSE:=EPL-2.0
 
 PKG_BUILD_PARALLEL:=1
-PKG_CONFIG_DEPENDS:=CONFIG_MOSQUITTO_AUTH_PAM_SUPPORT
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -28,7 +27,7 @@ define Package/mosquitto-auth-shadow
   SECTION:=net
   CATEGORY:=Network
   TITLE:=mosquitto - /etc/shadow authentication plugin
-  DEPENDS:=+mosquitto-ssl +MOSQUITTO_AUTH_PAM_SUPPORT:libpam
+  DEPENDS:=+mosquitto-ssl
   USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
 endef
 
@@ -37,14 +36,6 @@ define Package/mosquitto-auth-shadow/description
   users using /etc/shadow
 endef
 
-define Package/mosquitto-auth-shadow/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(CONFIG_MOSQUITTO_AUTH_PAM_SUPPORT),y)
-TARGET_CFLAGS+=-DENABLE_PAM_SUPPORT
-endif
-
 define Package/mosquitto-auth-shadow/install
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/

mosquitto-auth-shadow/src/Makefile

@@ -19,7 +19,7 @@ all: $(TARGETS)
 	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
 
 mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
-	$(CC) $(LDFLAGS) -shared -o $@ $^ $(if $(filter -DENABLE_PAM_SUPPORT,$(CFLAGS)),-lpam)
+	$(CC) $(LDFLAGS) -shared -o $@ $^
 
 clean:
 	rm -f *.o $(TARGETS)

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -15,78 +15,22 @@
 #include <string.h>
 #include <shadow.h>
 #include <crypt.h>
-#include <stdlib.h>
 #include <mosquitto.h>
 #include <mosquitto_broker.h>
 #include <mosquitto_plugin.h>
 
-#ifdef ENABLE_PAM_SUPPORT
-#include <security/pam_appl.h>
-
-static int pam_conversation(int num_msg, const struct pam_message **msg, struct pam_response **resp, void *appdata_ptr)
-{
-	int i;
-	const char *pass = (const char *)appdata_ptr;
-
-	*resp = calloc(num_msg, sizeof(struct pam_response));
-	if (*resp == NULL) {
-		mosquitto_log_printf(MOSQ_LOG_ERR, "pam failed to allocate buffer for validation");
-		return PAM_BUF_ERR;
-	}
-
-	if (pass == NULL)
-		return PAM_SUCCESS;
-
-	for (i = 0; i < num_msg; ++i) {
-		if (msg[i]->msg_style == PAM_PROMPT_ECHO_OFF) {
-			(*resp)[i].resp = strdup(pass);
-			if ((*resp)[i].resp == NULL) {
-				for (int j = 0; j < i ; j++)
-					free((*resp)[j].resp);
-
-				free(*resp);
-				*resp = NULL;
-				mosquitto_log_printf(MOSQ_LOG_ERR, "pam failed in strdup");
-				return PAM_BUF_ERR;
-			}
-		}
-	}
-	return PAM_SUCCESS;
-}
-
-static int process_pam_auth_callback(struct mosquitto_evt_basic_auth *ed)
-{
-	struct pam_conv conv;
-	int retval;
-	pam_handle_t *pamh = NULL;
-
-	conv.conv = pam_conversation;
-	conv.appdata_ptr = (void *)ed->password;
-
-	retval = pam_start("mosquitto", ed->username, &conv, &pamh);
-	if (retval != PAM_SUCCESS) {
-		mosquitto_log_printf(MOSQ_LOG_ERR, "pam start failed: %s", pam_strerror(pamh, retval));
-		return MOSQ_ERR_AUTH;
-	}
-
-	retval = pam_authenticate(pamh, 0);
-	pam_end(pamh, retval);
-	if (retval == PAM_SUCCESS) {
-		mosquitto_log_printf(MOSQ_LOG_NOTICE, "pam user [%s] logged in", ed->username);
-		return MOSQ_ERR_SUCCESS;
-	}
-
-	mosquitto_log_printf(MOSQ_LOG_NOTICE, "pam user [%s] failed authentication, err [%s]", ed->username, pam_strerror(pamh, retval));
-	return MOSQ_ERR_AUTH;
-}
-#else
-static int process_shadow_auth_callback(struct mosquitto_evt_basic_auth *ed)
+static int basic_auth_callback(int event, void *event_data, void *userdata)
 {
+	struct mosquitto_evt_basic_auth *ed = event_data;
 	struct spwd spbuf, *sp = NULL;
 	char buf[256];
 	struct crypt_data data;
 	char *hash;
 
+	/* Let other plugins or broker decide about anonymous login */
+	if (ed->username == NULL)
+		return MOSQ_ERR_PLUGIN_DEFER;
+
 	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
 
 	if (sp == NULL || sp->sp_pwdp == NULL)
@@ -110,22 +54,6 @@ static int process_shadow_auth_callback(struct mosquitto_evt_basic_auth *ed)
 
 	return MOSQ_ERR_AUTH;
 }
-#endif
-
-static int basic_auth_callback(int event, void *event_data, void *userdata)
-{
-	struct mosquitto_evt_basic_auth *ed = event_data;
-
-	/* Let other plugins or broker decide about anonymous login */
-	if (ed->username == NULL)
-		return MOSQ_ERR_PLUGIN_DEFER;
-
-#ifdef ENABLE_PAM_SUPPORT
-	return process_pam_auth_callback(ed);
-#else
-	return process_shadow_auth_callback(ed);
-#endif
-}
 
 int mosquitto_plugin_version(int supported_version_count,
 			     const int *supported_versions)

netmngr/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmngr
-PKG_VERSION:=1.1.8
+PKG_VERSION:=1.1.6
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/network/netmngr.git
-PKG_SOURCE_VERSION:=6310f32b80f8abeccbf99ad55ce88792b19342d6
+PKG_SOURCE_VERSION:=f1422e4de76990f7037ca265431d5f1031621c93
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

netmode/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=netmode
-PKG_VERSION:=1.1.5
+PKG_VERSION:=1.1.2
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only

netmode/files/datamodel.json

@@ -207,23 +207,6 @@
 						}
 					]
 				},
-				"Type": {
-					"type": "string",
-					"read": true,
-					"write": true,
-					"description": "Datatype for this argument",
-					"protocols": [
-						"cwmp",
-						"usp"
-					],
-					"mapping": [
-						{
-							"type": "uci_sec",
-							"data": "@Parent",
-							"key": "type"
-						}
-					]
-				},
 				"Description": {
 					"type": "string",
 					"read": true,

netmode/files/etc/netmodes/bridged/scripts/10-bridged

@@ -1,127 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-source "/etc/device_info"
-
-l2_mcast_config() {
-	# configure L2 mcast config for snooping
-	logger -s -p user.info -t "netmode" "Generating L2 mcast configuration"
-
-	# remove proxy sections
-	uci -q delete mcast.igmp_proxy_1
-	uci -q delete mcast.mc_proxy_MLD
-
-	# add igmp_snooping section
-	uci -q set mcast.igmp_snooping_1=snooping
-	uci -q set mcast.igmp_snooping_1.enable='1'
-	uci -q set mcast.igmp_snooping_1.proto='igmp'
-	uci -q set mcast.igmp_snooping_1.version='2'
-	uci -q set mcast.igmp_snooping_1.robustness='2'
-	uci -q set mcast.igmp_snooping_1.query_interval='125'
-	uci -q set mcast.igmp_snooping_1.query_response_interval='100'
-	uci -q set mcast.igmp_snooping_1.last_member_query_interval='10'
-	uci -q set mcast.igmp_snooping_1.fast_leave='1'
-	uci -q set mcast.igmp_snooping_1.snooping_mode='2'
-	uci -q set mcast.igmp_snooping_1.interface='br-lan'
-	uci -q add_list mcast.igmp_snooping_1.filter='239.0.0.0/8'
-
-	# add mld_snooping section
-	uci -q set mcast.mld_snooping_1=snooping
-	uci -q set mcast.mld_snooping_1.enable='1'
-	uci -q set mcast.mld_snooping_1.proto='mld'
-	uci -q set mcast.mld_snooping_1.version='2'
-	uci -q set mcast.mld_snooping_1.robustness='2'
-	uci -q set mcast.mld_snooping_1.query_interval='125'
-	uci -q set mcast.mld_snooping_1.query_response_interval='100'
-	uci -q set mcast.mld_snooping_1.last_member_query_interval='10'
-	uci -q set mcast.mld_snooping_1.fast_leave='1'
-	uci -q set mcast.mld_snooping_1.snooping_mode='2'
-	uci -q set mcast.mld_snooping_1.interface='br-lan'
-
-	uci -q commit mcast
-}
-
-l2_network_config() {
-	logger -s -p user.info -t "netmode" "Generating L2 network configuration"
-
-	# Configure L2 Network Mode
-	uci -q set network.lan=interface
-	uci -q set network.lan.proto='dhcp'
-	uci -q set network.lan.vendorid="$(uci -q get network.wan.vendorid)"
-	uci -q set network.lan.clientid="$(uci -q get network.wan.clientid)"
-	uci -q set network.lan.reqopts="$(uci -q get network.wan.reqopts)"
-	uci -q set network.lan.sendopts="$(uci -q get network.wan.sendopts)"
-	uci -q set network.lan.device='br-lan'
-	uci -q set network.lan.force_link='1'
-
-	uci -q set network.lan6=interface
-	uci -q set network.lan6.proto='dhcpv6'
-	uci -q set network.lan6.device='@lan'
-	uci -q set network.lan6.reqprefix='no'
-
-	uci -q set network.wan.disabled='1'
-	uci -q set network.wan6.disabled='1'
-
-	uci -q delete network.br_lan.ports
-	uci -q set network.br_lan.bridge_empty='1'
-
-	add_port_to_br_lan() {
-		port="$1"
-		[ -n "$port" -a -d /sys/class/net/$port ] || continue
-		uci add_list network.br_lan.ports="$port"
-	}
-
-	if [ -f /etc/board.json ]; then
-		json_load_file /etc/board.json
-		json_select network
-		json_select lan
-		if json_is_a ports array; then
-			json_for_each_item add_port_to_br_lan ports
-		else
-			json_get_var device device
-			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
-		fi
-		json_select ..
-		json_select wan 2>/dev/null
-		json_get_var device device
-		[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
-		json_cleanup
-	fi
-
-	uci -q commit network
-
-	# Disable DHCP Server
-	uci -q set dhcp.lan.ignore=1
-	uci -q commit dhcp
-	/etc/init.d/odhcpd disable
-
-	# Disable SSDPD
-	uci -q set ssdpd.ssdp.enabled="0"
-	uci -q commit ssdpd
-
-	# Update CWMP Agent WAN Interface
-	uci -q set cwmp.cpe.default_wan_interface="lan"
-	uci -q commit cwmp
-
-	# Update gateway WAN Interface
-	uci -q set gateway.global.wan_interface="lan"
-	uci -q commit gateway
-
-	# disable firewall
-	uci -q set firewall.globals.enabled="0"
-	uci -q commit firewall
-}
-
-l2_network_config
-l2_mcast_config
-
-# If device is already boot-up, assume netmode changed during runtime
-if [ -f /var/run/boot_complete ]; then
-	/etc/init.d/odhcpd stop 2>/dev/null
-	for config in network dhcp ssdpd cwmp gateway firewall mcast; do
-		ubus call uci commit "{\"config\":\"$config\"}"
-		sleep 1
-	done
-fi

netmode/files/etc/netmodes/routed-dhcp/scripts/10-routed-dhcp

@@ -1,128 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-source "/etc/device_info"
-
-l3_mcast_config() {
-	# configure L3 mcast config
-	logger -s -p user.info -t "netmode" "Generating L3 mcast configuration"
-
-	rm -f /etc/config/mcast
-	sh /rom/etc/uci-defaults/61-mcast_config_generate
-	uci -q commit mcast
-}
-
-l3_network_config() {
-	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
-
-	wandev="$(uci -q get network.WAN.ifname)"
-
-	# Configure L3 Network Mode
-	uci -q set network.lan=interface
-	uci -q set network.lan.device='br-lan'
-	uci -q set network.lan.proto='static'
-	uci -q set network.lan.ipaddr='192.168.1.1'
-	uci -q set network.lan.netmask='255.255.255.0'
-	uci -q set network.lan.ip6assign='60'
-	uci -q delete network.lan.vendorid
-	uci -q delete network.lan.clientid
-	uci -q delete network.lan.reqopts
-	uci -q delete network.lan.sendopts
-
-	uci -q delete network.lan6	
-
-	uci -q set network.wan=interface
-	uci -q set network.wan.proto='dhcp'
-	uci -q delete network.wan.disabled
-	uci -q delete network.wan.username
-	uci -q delete network.wan.password
-	uci -q delete network.wan.ipaddr
-	uci -q delete network.wan.gateway
-	uci -q delete network.wan.netmask
-
-	uci -q set network.wan6=interface
-	uci -q set network.wan6.proto='dhcpv6'
-	uci -q delete network.wan6.disabled
-
-	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
-		uci -q set network.vlan_${NETMODE_vlanid}=device
-		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
-		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
-		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
-		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
-
-		wandev="$wandev.$NETMODE_vlanid"
-	fi
-
-	uci -q set network.wan.device="$wandev"
-	uci -q set network.wan6.device="$wandev"
-
-	uci -q delete network.wan.dns
-	if [ -n "$NETMODE_dns_servers" ]; then
-		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
-		for server in $dns_servers; do
-		    uci -q add_list network.wan.dns=$server
-		done
-	fi
-
-	uci -q delete network.br_lan.ports
-	uci -q set network.br_lan.bridge_empty='1'
-
-	add_port_to_br_lan() {
-		port="$1"
-		[ -n "$port" -a -d /sys/class/net/$port ] || continue
-		uci add_list network.br_lan.ports="$port"
-	}
-
-	if [ -f /etc/board.json ]; then
-		json_load_file /etc/board.json
-		json_select network
-		json_select lan
-		if json_is_a ports array; then
-			json_for_each_item add_port_to_br_lan ports
-		else
-			json_get_var device device
-			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
-		fi
-		json_select ..
-		json_cleanup
-	fi
-
-	uci -q commit network
-
-	# Enable DHCP Server
-	uci -q set dhcp.lan.ignore=0
-	uci -q set dhcp.wan.ignore=1
-	uci -q commit dhcp
-	/etc/init.d/odhcpd enable
-
-	# Enable SSDPD
-	uci -q set ssdpd.ssdp.enabled="1"
-	uci -q commit ssdpd
-
-	# Update CWMP Agent WAN Interface
-	uci -q set cwmp.cpe.default_wan_interface="wan"
-	uci -q commit cwmp
-
-	# Update gateway WAN Interface
-	uci -q set gateway.global.wan_interface="wan"
-	uci -q commit gateway
-
-	# Enable firewall
-	uci -q set firewall.globals.enabled="1"
-	uci -q commit firewall
-}
-
-l3_network_config
-l3_mcast_config
-
-# If device is already boot-up, assume netmode changed during runtime
-if [ -f /var/run/boot_complete ]; then
-	/etc/init.d/odhcpd restart 2>/dev/null
-	for config in network dhcp ssdpd cwmp gateway firewall mcast; do
-		ubus call uci commit "{\"config\":\"$config\"}"
-		sleep 1
-	done
-fi

netmode/files/etc/netmodes/routed-pppoe/scripts/10-routed-pppoe

@@ -1,126 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-source "/etc/device_info"
-
-l3_mcast_config() {
-	# configure L3 mcast config
-	logger -s -p user.info -t "netmode" "Generating L3 mcast configuration"
-
-	rm -f /etc/config/mcast
-	sh /rom/etc/uci-defaults/61-mcast_config_generate
-	uci -q commit mcast
-}
-
-l3_network_pppoe_config() {
-	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
-
-	wandev="$(uci -q get network.WAN.ifname)"
-
-	# Configure L3 Network Mode
-	uci -q set network.lan=interface
-	uci -q set network.lan.device='br-lan'
-	uci -q set network.lan.proto='static'
-	uci -q set network.lan.ipaddr='192.168.1.1'
-	uci -q set network.lan.netmask='255.255.255.0'
-	uci -q set network.lan.ip6assign='60'
-	uci -q delete network.lan.vendorid
-	uci -q delete network.lan.clientid
-	uci -q delete network.lan.reqopts
-	uci -q delete network.lan.sendopts
-
-	uci -q delete network.lan6
-
-	uci -q set network.wan=interface
-	uci -q set network.wan.proto='pppoe'
-	uci -q set network.wan.username="$NETMODE_username"
-	uci -q set network.wan.password="$NETMODE_password"
-	uci -q delete network.wan.disabled
-	uci -q delete network.wan.ipaddr
-	uci -q delete network.wan.gateway
-	uci -q delete network.wan.netmask
-
-	uci -q set network.wan6.disabled='1'
-
-	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
-		uci -q set network.vlan_${NETMODE_vlanid}=device
-		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
-		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
-		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
-		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
-
-		wandev="$wandev.$NETMODE_vlanid"
-	fi
-
-	uci -q set network.wan.device="$wandev"
-	uci -q set network.wan6.device="$wandev"
-
-	uci -q delete network.wan.dns
-	if [ -n "$NETMODE_dns_servers" ]; then
-		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
-		for server in $dns_servers; do
-		    uci -q add_list network.wan.dns=$server
-		done
-	fi
-
-	uci -q delete network.br_lan.ports
-	uci -q set network.br_lan.bridge_empty='1'
-
-	add_port_to_br_lan() {
-		port="$1"
-		[ -n "$port" -a -d /sys/class/net/$port ] || continue
-		uci add_list network.br_lan.ports="$port"
-	}
-
-	if [ -f /etc/board.json ]; then
-		json_load_file /etc/board.json
-		json_select network
-		json_select lan
-		if json_is_a ports array; then
-			json_for_each_item add_port_to_br_lan ports
-		else
-			json_get_var device device
-			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
-		fi
-		json_select ..
-		json_cleanup
-	fi
-
-	uci -q commit network
-
-	# Enable DHCP Server
-	uci -q set dhcp.lan.ignore=0
-	uci -q set dhcp.wan.ignore=1
-	uci -q commit dhcp
-	/etc/init.d/odhcpd enable
-
-	# Enable SSDPD
-	uci -q set ssdpd.ssdp.enabled="1"
-	uci -q commit ssdpd
-
-	# Update CWMP Agent WAN Interface
-	uci -q set cwmp.cpe.default_wan_interface="wan"
-	uci -q commit cwmp
-
-	# Update gateway WAN Interface
-	uci -q set gateway.global.wan_interface="wan"
-	uci -q commit gateway
-
-	# Enable firewall
-	uci -q set firewall.globals.enabled="1"
-	uci -q commit firewall
-}
-
-l3_network_pppoe_config
-l3_mcast_config
-
-# If device is already boot-up, assume netmode changed during runtime
-if [ -f /var/run/boot_complete ]; then
-	/etc/init.d/odhcpd restart 2>/dev/null
-	for config in network dhcp ssdpd cwmp gateway firewall mcast; do
-		ubus call uci commit "{\"config\":\"$config\"}"
-		sleep 1
-	done
-fi

netmode/files/etc/netmodes/routed-static/scripts/10-routed-static

@@ -1,127 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-source "/etc/device_info"
-
-l3_mcast_config() {
-	# configure L3 mcast config
-	logger -s -p user.info -t "netmode" "Generating L3 mcast configuration"
-
-	rm -f /etc/config/mcast
-	sh /rom/etc/uci-defaults/61-mcast_config_generate
-	uci -q commit mcast
-}
-
-l3_network_config() {
-	logger -s -p user.info -t "netmode" "Generating L3 network configuration"
-
-	wandev="$(uci -q get network.WAN.ifname)"
-
-	# Configure L3 Network Mode
-	uci -q set network.lan=interface
-	uci -q set network.lan.device='br-lan'
-	uci -q set network.lan.proto='static'
-	uci -q set network.lan.ipaddr='192.168.1.1'
-	uci -q set network.lan.netmask='255.255.255.0'
-	uci -q set network.lan.ip6assign='60'
-	uci -q delete network.lan.vendorid
-	uci -q delete network.lan.clientid
-	uci -q delete network.lan.reqopts
-	uci -q delete network.lan.sendopts
-
-	uci -q delete network.lan6	
-
-	uci -q set network.wan=interface
-	uci -q set network.wan.device="$wandev"
-	uci -q set network.wan.proto='static'
-	uci -q set network.wan.ipaddr="$NETMODE_ipaddr"
-	uci -q set network.wan.gateway="$NETMODE_gateway"
-	uci -q set network.wan.netmask="$NETMODE_netmask"
-	uci -q delete network.wan.disabled
-	uci -q delete network.wan.username
-	uci -q delete network.wan.password
-
-	uci -q set network.wan6.disabled='1'
-
-	if [ -n "$wandev" ] && echo "$NETMODE_vlanid" | grep -Eq '^[0-9]+$' && [ "$NETMODE_vlanid" -ge 1 ]; then
-		uci -q set network.vlan_${NETMODE_vlanid}=device
-		uci -q set network.vlan_${NETMODE_vlanid}.type="8021q"
-		uci -q set network.vlan_${NETMODE_vlanid}.name="$wandev.$NETMODE_vlanid"
-		uci -q set network.vlan_${NETMODE_vlanid}.ifname="$wandev"
-		uci -q set network.vlan_${NETMODE_vlanid}.vid=$NETMODE_vlanid
-
-		wandev="$wandev.$NETMODE_vlanid"
-	fi
-
-	uci -q set network.wan.device="$wandev"
-	uci -q set network.wan6.device="$wandev"
-
-	uci -q delete network.wan.dns
-	if [ -n "$NETMODE_dns_servers" ]; then
-		dns_servers="$(echo $NETMODE_dns_servers | tr ',' ' ')"
-		for server in $dns_servers; do
-		    uci -q add_list network.wan.dns=$server
-		done
-	fi
-
-	uci -q delete network.br_lan.ports
-	uci -q set network.br_lan.bridge_empty='1'
-
-	add_port_to_br_lan() {
-		port="$1"
-		[ -n "$port" -a -d /sys/class/net/$port ] || continue
-		uci add_list network.br_lan.ports="$port"
-	}
-
-	if [ -f /etc/board.json ]; then
-		json_load_file /etc/board.json
-		json_select network
-		json_select lan
-		if json_is_a ports array; then
-			json_for_each_item add_port_to_br_lan ports
-		else
-			json_get_var device device
-			[ -n "$device" ] && uci add_list network.br_lan.ports="$device"
-		fi
-		json_select ..
-		json_cleanup
-	fi
-
-	uci -q commit network
-
-	# Enable DHCP Server
-	uci -q set dhcp.lan.ignore=0
-	uci -q set dhcp.wan.ignore=1
-	uci -q commit dhcp
-	/etc/init.d/odhcpd enable
-
-	# Enable SSDPD
-	uci -q set ssdpd.ssdp.enabled="1"
-	uci -q commit ssdpd
-
-	# Update CWMP Agent WAN Interface
-	uci -q set cwmp.cpe.default_wan_interface="wan"
-	uci -q commit cwmp
-
-	# Update gateway WAN Interface
-	uci -q set gateway.global.wan_interface="wan"
-	uci -q commit gateway
-
-	# Enable firewall
-	uci -q set firewall.globals.enabled="1"
-	uci -q commit firewall
-}
-
-l3_network_config
-l3_mcast_config
-
-# If device is already boot-up, assume netmode changed during runtime
-if [ -f /var/run/boot_complete ]; then
-	/etc/init.d/odhcpd restart 2>/dev/null
-	for config in network dhcp ssdpd cwmp gateway firewall mcast; do
-		ubus call uci commit "{\"config\":\"$config\"}"
-		sleep 1
-	done
-fi

netmode/files/etc/netmodes/supported_modes.json

@@ -3,92 +3,29 @@
   "supported_modes": [
     {
       "name": "routed-dhcp",
-      "description": "DHCP",
-      "supported_args": [
-        {
-          "name": "vlanid",
-          "description": "VLAN ID",
-          "required": false,
-          "type": "integer"
-        },
-        {
-          "name": "dns_servers",
-          "description": "DNS Servers",
-          "required": false,
-          "type": "string"
-        }
-      ]
+      "description": "WAN with DHCP proto (Layer 3)"
     },
     {
       "name": "routed-pppoe",
-      "description": "PPPoE",
+      "description": "WAN with PPPoE (Layer 3)",
       "supported_args": [
         {
           "name": "username",
-          "description": "PPPoE Username",
+          "description": "PPoE username",
           "required": true,
-          "type": "string",
           "#value": "TestUser"
         },
         {
           "name": "password",
-          "description": "PPPoE Password",
+          "description": "PPoE password",
           "required": true,
-          "type": "string",
           "#value": "TestPassword"
-        },
-        {
-          "name": "vlanid",
-          "description": "VLAN ID",
-          "required": false,
-          "type": "integer"
-        },
-        {
-          "name": "dns_servers",
-          "description": "DNS Servers",
-          "required": false,
-          "type": "string"
         }
       ]
     },
     {
-      "name": "routed-static",
-      "description": "Static",
-      "supported_args": [
-        {
-          "name": "ipaddr",
-          "description": "IP Address",
-          "required": true,
-          "type": "string",
-          "#value": "93.21.0.104"
-        },
-        {
-          "name": "netmask",
-          "description": "Subnet Mask",
-          "required": true,
-          "type": "string",
-          "#value": "255.255.255.0"
-        },
-        {
-          "name": "gateway",
-          "description": "Default Gateway",
-          "required": true,
-          "type": "string",
-          "#value": "93.21.0.1"
-        },
-        {
-          "name": "vlanid",
-          "description": "VLAN ID",
-          "required": false,
-          "type": "integer"
-        },
-        {
-          "name": "dns_servers",
-          "description": "DNS Servers",
-          "required": false,
-          "type": "string"
-        }
-      ]
+      "name": "bridged",
+      "description": "Bridged mode (Layer 2)"
     }
   ]
 }

netmode/files/etc/uci-defaults/40_netmode_set_default_netmode

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-enabled="$(uci -q get netmode.global.enabled)"
-[ "$enabled" == "1" ] || exit 0
-
-mode="$(uci -q get netmode.global.mode)"
-[ -n "$mode" ] && exit 0
-
-[ -f /etc/netmodes/supported_modes.json ] || exit 0
-
-# NetMode is enabled without a Mode being set
-# Figure out the current mode from network config
-wanproto=$(uci -q get network.wan.proto)
-curmode=""
-case "$wanproto" in
-	dhcp) curmode="routed-dhcp" ;;
-	pppoe) curmode="routed-pppoe" ;;
-	static) curmode="routed-static" ;;
-esac
-
-found=0
-for md in $(jsonfilter -i /etc/netmodes/supported_modes.json -e "@.supported_modes.*.name"); do
-	[ "$md" == "$curmode" ] && found=1
-done
-
-if [ $found -eq 1 ]; then
-	uci -q set netmode.global.mode="$curmode"
-	echo "$curmode" > /etc/netmodes/.last_mode
-fi

netmode/files/etc/uci-defaults/40_supported_mode

@@ -17,7 +17,7 @@ fi
 
 configure_supp_modes_args()
 {
-	local obj inst name description required value parent type
+	local obj inst name description required value parent
 
 	obj="${1}"
 	inst="${2}"
@@ -32,14 +32,12 @@ configure_supp_modes_args()
 	json_get_var description description
 	json_get_var value value
 	json_get_var required required
-	json_get_var type type
 
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}=supported_args
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.name="${name}"
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.description="${description}"
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.required="${required}"
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.value="${value}"
-	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.type="${type}"
 	uci -q set netmode.${parent}_supprted_args_${SUPP_ARGS}.dm_parent="${parent}"
 
 	json_select ..

netmode/files/lib/netmode/post/datamodel_init.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-# This script is to cleanup dmmap and restart datamodel related services
-# when wan mode changes
-
-if [ -d "/etc/bbfdm/dmmap/" ]; then
-	rm -rf /etc/bbfdm/dmmap/*
-fi
-
-# If device is booting up, no need to restart services
-if [ ! -f /var/run/boot_complete ]; then
-	return 0
-fi
-
-if [ -x "/etc/init.d/bbfdm.services" ]; then
-	/etc/init.d/bbfdm.services restart
-fi
-
-if [ -x "/etc/init.d/bbfdmd" ]; then
-	/etc/init.d/bbfdmd restart
-fi
-
-if [ -x "/etc/init.d/obuspa" ]; then
-	/etc/init.d/obuspa restart
-fi

nlohmann-json/Makefile

@@ -1,42 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nlohmann-json
-PKG_VERSION:=3.11.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/nlohmann/json.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE.MIT
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/nlohmann-json
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=JSON for Modern C++ (nlohmann/json)
-endef
-
-define Package/nlohmann-json/description
-  JSON for Modern C++ is a single-header C++ library for working with JSON.
-endef
-
-define Build/Compile
-	# Header-only, nothing to compile
-	true
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/nlohmann
-	$(CP) $(PKG_BUILD_DIR)/single_include/nlohmann/json.hpp $(1)/usr/include/nlohmann/
-endef
-
-define Package/nlohmann-json/install
-	true
-endef
-
-$(eval $(call BuildPackage,nlohmann-json))

nng/Makefile

@@ -1,43 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=nng
-PKG_VERSION:=1.11
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/nanomsg/nng.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE.txt
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/nng
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=NNG - nanomsg-next-gen
-  URL:=https://github.com/nanomsg/nng
-  DEPENDS:=+libpthread +libatomic
-endef
-
-define Package/nng/description
-  NNG is a lightweight messaging library, a successor to nanomsg.
-endef
-
-CMAKE_OPTIONS += \
-	-DBUILD_SHARED_LIBS=ON \
-	-DNNG_ENABLE_EXAMPLES=OFF \
-	-DNNG_ENABLE_TESTS=OFF
-
-define Package/nng/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libnng.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,nng))

obuspa/Config.in

@@ -19,8 +19,13 @@ config OBUSPA_CONTROLLER_MTP_VERIFY
 	bool "Enable verification of controller MTP before processing the message"
 	default n
 
-config OBUSPA_LOCAL_MQTT_LISTENER
-	bool "Configures local mqtt broker for local usp connections"
+config OBUSPA_ENABLE_TEST_CONTROLLER
+	bool "Adds a test controller by default"
+	default n
+	select OBUSPA_ENABLE_TEST_CONTROLLER_LOCAL
+
+config OBUSPA_ENABLE_TEST_CONTROLLER_LOCAL
+	bool "Adds a test controller by default (local access only)"
 	default n
 
 config OBUSPA_MAX_CONTROLLERS_NUM
@@ -65,13 +70,4 @@ config OBUSPA_VENDOR_PREFIX
 config OBUSPA_OVERRIDE_CT_ROLE
 	bool "Override ControllerTrust role with factory default roles"
 	default y
-
-config OBUSPA_VC_POLL_PERIOD
-	int "Polling interval in sec for ValueChange Subscriptions"
-	range 15 120
-	default "15"
-	help
-	 Obuspa relies on a polling mechanism to determine the ValueChange, Add, Del Subscriptions.
-	 Short poll period could give more responsive subscription events, but might delay overall experience in slower CPUs with good amount of subscriptions, on the other hand, a bigger value results into less responsive subscription handling. This value must be in range of 15 to 120 secs. (default 15)
-
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=10.0.0.17
+PKG_VERSION:=10.0.0.8
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/obuspa.git
-PKG_SOURCE_VERSION:=8f0f8cfc2c4048bfed674163030d0b06f96f2da1
+PKG_SOURCE_VERSION:=3e9299063e3c65565d2c834b5ab654fda830f749
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -32,9 +32,9 @@ define Package/obuspa
   SUBMENU:=TRx69
   TITLE:=USP agent
   MENU:=1
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libmosquitto-ssl +libwebsockets-openssl
-  DEPENDS+=+libjson-c +libubox +libubus +libuci +libblobmsg-json
-  DEPENDS+=+ca-certificates +OBUSPA_LOCAL_MQTT_LISTENER:mosquitto-ssl
+  DEPENDS:=+libopenssl +libuci +libblobmsg-json +libcurl +libsqlite3 +libubox +libubus +libmosquitto-ssl +libwebsockets-openssl +ca-certificates \
+		+OBUSPA_ENABLE_TEST_CONTROLLER_LOCAL:mosquitto-ssl +OBUSPA_ENABLE_TEST_CONTROLLER_LOCAL:mosquitto-client-ssl \
+		+OBUSPA_ENABLE_TEST_CONTROLLER:mosquitto-auth-shadow +libjson-c
   DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
 endef
 
@@ -107,10 +107,6 @@ ifneq ($(CONFIG_OBUSPA_MAX_CONTROLLERS_NUM),)
 TARGET_CFLAGS += -DOBUSPA_MAX_CONTROLLERS_NUM=$(CONFIG_OBUSPA_MAX_CONTROLLERS_NUM)
 endif
 
-ifneq ($(CONFIG_OBUSPA_VC_POLL_PERIOD),)
-TARGET_CFLAGS += -DOBUSPA_VC_POLL_PERIOD=$(CONFIG_OBUSPA_VC_POLL_PERIOD)
-endif
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
 	$(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/
@@ -132,23 +128,27 @@ define Package/obuspa/install
 	$(INSTALL_DATA) ./files/etc/users/roles/*.json $(1)/etc/users/roles/
 	$(INSTALL_DATA) ./files/etc/obuspa/usp_utils.sh $(1)/etc/obuspa/
 	echo "$(VENDOR_PREFIX)" > $(1)/etc/obuspa/vendor_prefix
-	$(INSTALL_DATA) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/60-generate-ctrust-defaults $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/obuspa-set-dhcp-option $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/92-obuspa_firewall $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/93-obuspa_mdns_adv $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/94-obuspa_set_credential $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/60-generate-ctrust-defaults $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/obuspa-set-dhcp-option $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/92-obuspa_firewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/93-obuspa_mdns_adv $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/94-obuspa_set_credential $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/firewall.usp $(1)/etc/
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_obuspa_opt125.user $(1)/etc/udhcpc.user.d/
+	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_obuspa_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_obuspa_opt125.user
 ifeq ($(CONFIG_OBUSPA_CWMP_DATAMODEL_SUPPORT),y)
 	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
 	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libuspagentdm.so $(1) $(PKG_NAME)
 endif
-ifeq ($(CONFIG_OBUSPA_LOCAL_MQTT_LISTENER),y)
-	$(INSTALL_DATA) ./files/etc/uci-defaults/55-obuspa-local-mqtt-usp-connection $(1)/etc/uci-defaults/
+ifeq ($(CONFIG_OBUSPA_ENABLE_TEST_CONTROLLER),y)
+	$(INSTALL_BIN) ./files/etc/uci-defaults/54-test-usp-remote $(1)/etc/uci-defaults/
+endif
+ifeq ($(CONFIG_OBUSPA_ENABLE_TEST_CONTROLLER_LOCAL),y)
+	$(INSTALL_BIN) ./files/etc/init.d/usptest $(1)/etc/init.d/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/55-test-usp-controller $(1)/etc/uci-defaults/
 endif
 ifeq ($(CONFIG_OBUSPA_OVERRIDE_CT_ROLE),y)
-	$(INSTALL_DATA) ./files/etc/uci-defaults/61-override-ct-roles $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/61-override-ct-roles $(1)/etc/uci-defaults/
 endif
 endef
 

obuspa/files/etc/config/obuspa

@@ -10,4 +10,4 @@ config obuspa 'global'
 	#option client_cert '/etc/obuspa/client.pem'
 	option log_dest 'syslog'
 	option dm_caching_exclude '/etc/obuspa/transient_dm.json'
-	option dualstack_pref 'IPv6'
+

obuspa/files/etc/init.d/obuspa

@@ -6,18 +6,19 @@ USE_PROCD=1
 
 PROG=/usr/sbin/obuspa
 CONFIGURATION=obuspa
+
 ENV_PROFILE="/root/.profile"
 KEEP_FILE="/lib/upgrade/keep.d/obuspa"
 
 RESET_FILE="/tmp/obuspa/fw_defaults"
-
-OBUSPA_BOOT_MARKER="/etc/obuspa/.boot"
+SQL_DB_FILE="/tmp/obuspa/usp.db"
+DB_DUMP="/tmp/obuspa/usp.dump_$(date +%s)"
 
 BASEPATH=""
 INSTANCE_COUNT=0
-CLIENT_ID_PREFIX=""
 
 . /lib/functions/network.sh
+. /usr/share/libubox/jshn.sh
 . /etc/obuspa/usp_utils.sh
 
 global_init()
@@ -29,7 +30,6 @@ global_init()
 log()
 {
 	echo "$*"|logger -t obuspa.init -p debug
-	echo "$*" >/dev/console
 }
 
 db_set_reset_file()
@@ -47,9 +47,37 @@ db_set_reset_file()
 	fi
 }
 
+db_set_sql()
+{
+	local param value
+
+	param="${1}"
+	shift
+	value="$*"
+
+	if [ -n "${param}" ] && [ -n "${value}" ]; then
+		if grep -q "${param} " ${DB_DUMP}; then
+			value="${value//\//\\/}"
+			sed -i "s/${param} .*/${param} \"${value}\"/g" ${DB_DUMP}
+		else
+			echo "${param} \"${value}\"" >> ${DB_DUMP}
+		fi
+	fi
+}
+
 db_set()
 {
-	db_set_reset_file "$@"
+	# if sql db dump file present, update it
+	if [ -f "${DB_DUMP}" ]; then
+		db_set_sql "$@"
+	else
+		db_set_reset_file "$@"
+	fi
+}
+
+dump_db()
+{
+	${PROG} -v0 -f ${SQL_DB_FILE} -c show database |grep "^Internal.\|^Device."|sed '{s/=> /"/g;s/$/"/g}' | sort  > ${DB_DUMP}
 }
 
 # if db present then check if it matches with existing instances
@@ -64,6 +92,21 @@ get_base_path()
 	path=""
 	count=0
 
+	if [ -f "${DB_DUMP}" ]; then
+		path=$(grep -E "${refpath}\d+.Alias \"${value}\"" ${DB_DUMP})
+		path=${path%.*}
+		if [ -z "${path}" ]; then
+			path=$(grep -oE "${refpath}\d+" ${DB_DUMP} |sort -r|head -n 1)
+			if [ -n "${path}" ]; then
+				count=${path##*.}
+				count=$(( count + 1 ))
+			else
+				count=1
+			fi
+			path="${refpath}${count}"
+		fi
+	fi
+
 	if [ -z "${path}" ]; then
 		INSTANCE_COUNT=$(( INSTANCE_COUNT + 1 ))
 		path="${refpath}${INSTANCE_COUNT}"
@@ -79,7 +122,9 @@ get_refrence_path()
 	value="${2}"
 	path=""
 
-	if [ -f "${RESET_FILE}" ]; then
+	if [ -f "${DB_DUMP}" ]; then
+		path=$(grep -E "${dmref}\d+.Alias " ${DB_DUMP}|grep -w "${value}")
+	elif [ -f "${RESET_FILE}" ]; then
 		path=$(grep -E "${dmref}\d+.Alias " ${RESET_FILE}|grep -w "${value}")
 	fi
 	path=${path%.*}
@@ -91,7 +136,7 @@ update_keep()
 	file=${1}
 
 	if [ -z "${file}" ]; then
-		return 0
+		return;
 	fi
 
 	if [ ! -f "${KEEP_FILE}" ]; then
@@ -196,8 +241,7 @@ validate_mqtt_client_section()
 		'Password:string' \
 		'ProtocolVersion:or("3.1", "3.1.1","5.0"):5.0' \
 		'TransportProtocol:or("TCP/IP","TLS"):TCP/IP' \
-		'ClientID:string' \
-		'RequestResponseInfo:bool:1'
+		'ClientID:string'
 }
 
 validate_challenge_section()
@@ -218,7 +262,7 @@ configure_localagent()
 
 	validate_localagent_section "${1}" || {
 		log "Validation of localagent section failed"
-		return 0
+		return 0;
 	}
 
 	db_set Device.LocalAgent.EndpointID "${EndpointID}"
@@ -226,18 +270,13 @@ configure_localagent()
 
 update_reset_reason()
 {
-	[ -f "/tmp/reset_reason" ] || return 0
+	[ -f "/tmp/reset_reason" ] || return 0;
 
 	if grep -qwi "defaultreset" /tmp/reset_reason; then
 		db_set Internal.Reboot.Cause "FactoryReset"
 	fi
 }
 
-update_dual_stack_pref()
-{
-	db_set Internal.DualStackPreference "${1}"
-}
-
 get_role_index()
 {
 	local name drole
@@ -265,6 +304,10 @@ get_role_index()
 		val="$(grep "Device.LocalAgent.ControllerTrust.Role.\d.Name" ${CTRUST_RESET_FILE} |grep $name)"
 		val="$(echo ${val/.Name /,}|cut -d, -f 1)"
 		echo "$val"
+	elif [ -f "${DB_DUMP}" ]; then
+		val="$(grep "Device.LocalAgent.ControllerTrust.Role.\d.Name" ${DB_DUMP} |grep $name)"
+		val="$(echo ${val/.Name /,}|cut -d, -f 1)"
+		echo "$val"
 	else
 		log "Not able to get role ${name}, use Untrusted role"
 		echo "${drole}"
@@ -282,19 +325,19 @@ configure_controller()
 	sec="${1}"
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
-		return 1
+		return 1;
 	}
 
 	sec="${sec/controller_/cpe-}"
 	get_base_path "Device.LocalAgent.Controller." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
+		return 1;
 	fi
 
 	if [ -z "${Protocol}" ]; then
 		log "controller:: Protocol cannot be empty"
-		return 1
+		return 1;
 	fi
 
 	dm_ref=""
@@ -390,14 +433,14 @@ configure_subscription()
 	sec="${1}"
 	validate_subscription_section "${1}" || {
 		log "Validation of subscription section failed"
-		return 1
+		return 1;
 	}
 
 	sec="${sec/sub_/cpe-}"
 	get_base_path "Device.LocalAgent.Subscription." "sub_${1}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
+		return 1;
 	fi
 
 	if [ -n "${controller}" ]; then
@@ -434,12 +477,12 @@ configure_challenges()
 	get_base_path "Device.LocalAgent.ControllerTrust.Challenge." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
+		return 1;
 	fi
 
 	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
-		log "Either role_name or Role must defined for a challenge"
-		return 1
+		log "Either role_name or Role must defined for a challenge";
+		return 1;
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -466,18 +509,18 @@ configure_mtp() {
 	sec="${1}"
 	validate_mtp_section "${1}" || {
 		log "Validation of mtp section failed"
-		return 1
+		return 1;
 	}
 	sec="${sec/mtp_/cpe-}"
 	get_base_path "Device.LocalAgent.MTP." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
+		return 1;
 	fi
 
 	if [ -z "${Protocol}" ]; then
 		log "Protocol not defined for the mtp[${1}] section"
-		return 1
+		return 1;
 	fi
 
 	dm_ref=""
@@ -535,14 +578,14 @@ configure_stomp_connection() {
 	sec="${1}"
 	validate_stomp_connection_section "${1}" || {
 		log "Validation of stomp section failed"
-		return 1
+		return 1;
 	}
 
 	sec="${sec/stomp_/cpe-}"
 	get_base_path "Device.STOMP.Connection." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
+		return 1;
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -559,24 +602,20 @@ configure_stomp_connection() {
 
 configure_mqtt_client() {
 	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion
-	local TransportProtocol ClientID RequestResponseInfo
+	local TransportProtocol ClientID
 	local sec
 
 	sec="${1}"
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
-		return 1
+		return 1;
 	}
 
 	sec="${sec/mqtt_/cpe-}"
 	get_base_path "Device.MQTT.Client." "${sec}"
 	if [ -z "${BASEPATH}" ]; then
 		log "Failed to get path [$BASEPATH]"
-		return 1
-	fi
-
-	if [ -z "${ClientID}" ]; then
-		ClientID="${CLIENT_ID_PREFIX}-${sec}"
+		return 1;
 	fi
 
 	db_set "${BASEPATH}.Alias" "${sec}"
@@ -588,7 +627,6 @@ configure_mqtt_client() {
 	db_set "${BASEPATH}.ProtocolVersion" "${ProtocolVersion}"
 	db_set "${BASEPATH}.TransportProtocol" "${TransportProtocol}"
 	db_set "${BASEPATH}.ClientID" "${ClientID}"
-	db_set "${BASEPATH}.RequestResponseInfo" "${RequestResponseInfo}"
 }
 
 
@@ -603,9 +641,6 @@ configure_obuspa() {
 	fi
 
 	if [ -n "${log_level}" ]; then
-		if [ "${log_level}" -gt "4" ]; then
-			log_level="4"
-		fi
 		procd_append_param command -v "${log_level}"
 	fi
 
@@ -634,13 +669,13 @@ configure_obuspa() {
 
 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f "${db_file}"
-		if [ -f "${db_file}-journal" ]; then
-			log "SQL Journal detected ..."
-		fi
+		procd_append_param command -f "${SQL_DB_FILE}"
 	fi
 
 	if [ -f "${RESET_FILE}" ]; then
+		if [ -f "${SQL_DB_FILE}" ]; then
+			mv ${SQL_DB_FILE} ${SQL_DB_FILE}.old
+		fi
 		procd_append_param command -r ${RESET_FILE}
 	fi
 
@@ -659,34 +694,299 @@ configure_obuspa() {
 	fi
 }
 
-# Create factory reset file
-db_init()
+get_instances_from_db_dump()
 {
-	local reason
+	local obj inst
 
-	reason="${1}"
-	# remove usp.db, in case of reload
-	if [ -f "${OBUSPA_BOOT_MARKER}" ] && [ "${reason}" = "update" ]; then
-		log "Deleting ${OBUSPA_BOOT_MARKER} to enforce values from uci ...."
-		rm -f "${OBUSPA_BOOT_MARKER}"
+	obj="${1}\d+"
+	if [ ! -f "${DB_DUMP}" ]; then
+		echo ""
+		return 0;
 	fi
 
-	if [ -f "${OBUSPA_BOOT_MARKER}" ]; then
+	inst="$(grep -oE "${obj}" "${DB_DUMP}"|uniq)"
+	echo "$inst"
+}
+
+get_param_value_from_dump()
+{
+	local param value
+
+	param="${1}"
+
+	if [ -z "${param}" ] || [ ! -f "${DB_DUMP}" ]; then
+		log "error getting param"
+		echo ""
 		return 0
 	fi
 
-	# Remove reset file if present
-	[ -f "${RESET_FILE}" ] && rm ${RESET_FILE}
+	value="$(grep "^${param} " ${DB_DUMP}|awk '{print $2}')"
 
-	CLIENT_ID_PREFIX="$(db -q get device.deviceinfo.ManufacturerOUI)"
-	CLIENT_ID_PREFIX="${CLIENT_ID_PREFIX}-$(db -q get device.deviceinfo.SerialNumber)"
-	CLIENT_ID_PREFIX="${CLIENT_ID_PREFIX//+/%2b}"
+	echo "${value//\"/}"
+}
+
+update_uci_sec()
+{
+	local sec tmp
+
+	sec="${1}"
+	stype="${2}"
+	if [ -z "$sec" ] || [ -z "$stype" ]; then
+		log "No section name, error"
+		return 0
+	fi
+
+	tmp="$(uci_get obuspa "${sec}")"
+	if [ "$tmp" != "$stype" ]; then
+		uci_add obuspa "${stype}" "${sec}"
+	fi
+}
+
+sync_db_controller()
+{
+	local cntrs copts sec pvalue protocol
+
+	copts="Enable EndpointID PeriodicNotifInterval"
+	popts="Destination Topic Host Port Path EnableEncryption"
+
+	cntrs="$(get_instances_from_db_dump Device.LocalAgent.Controller.)"
+	for cntr in $cntrs; do
+		sec="$(get_param_value_from_dump "${cntr}".Alias)"
+		sec="${sec/cpe-/controller_}"
+		sec="${sec/-/_}"
+
+		update_uci_sec "${sec}" controller
+		for param in ${copts}; do
+			pvalue="$(get_param_value_from_dump "${cntr}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+		uci_set obuspa "${sec}" "_sync" "1"
+
+		protocol="$(get_param_value_from_dump "${cntr}".MTP.1.Protocol)"
+		if [ -z "${protocol}" ]; then
+			break;
+		fi
+		uci_set obuspa "${sec}" "Protocol" "${protocol}"
+		for param in ${popts}; do
+			pvalue="$(get_param_value_from_dump "${cntr}".MTP.1."${protocol}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+	done
+}
+
+sync_db_localagent_mtp()
+{
+	local mtps opts popts sec pvalue protocol
+
+	opts="Enable"
+	popts="ResponseTopicConfigured Destination Port Path EnableEncryption PublishQoS"
+
+	mtps="$(get_instances_from_db_dump Device.LocalAgent.MTP.)"
+	for inst in $mtps; do
+		sec="$(get_param_value_from_dump "${inst}".Alias)"
+		sec="${sec/cpe-/mtp_}"
+		sec="${sec/-/_}"
+		update_uci_sec "${sec}" mtp
+		for param in ${opts}; do
+			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+		uci_set obuspa "${sec}" "_sync" "1"
+
+		protocol="$(get_param_value_from_dump "${inst}".Protocol)"
+		if [ -z "${protocol}" ]; then
+			break;
+		fi
+		uci_set obuspa "${sec}" "Protocol" "${protocol}"
+		for param in ${popts}; do
+			pvalue="$(get_param_value_from_dump "${inst}"."${protocol}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+	done
+}
+
+
+sync_db_mqtt_client()
+{
+	local mtps copts sec pvalue protocol
+
+	opts="Enable BrokerAddress BrokerPort Username ProtocolVersion TransportProtocol ClientID"
+
+	mtps="$(get_instances_from_db_dump Device.MQTT.Client.)"
+	for inst in $mtps; do
+		sec="$(get_param_value_from_dump "${inst}".Alias)"
+		sec="${sec/cpe-/mqtt_}"
+		sec="${sec/-/_}"
+		update_uci_sec "${sec}" mqtt
+		for param in ${opts}; do
+			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+		uci_set obuspa "${sec}" "_sync" "1"
+	done
+}
+
+sync_db_stomp_connection()
+{
+	local mtps copts sec pvalue protocol
+
+	opts="Enable Host Port Username EnableEncryption EnableHeartbeats VirtualHost"
+
+	mtps="$(get_instances_from_db_dump Device.STOMP.Connection.)"
+	for inst in $mtps; do
+		sec="$(get_param_value_from_dump "${inst}".Alias)"
+		sec="${sec/cpe-/stomp_}"
+		sec="${sec/-/_}"
+		update_uci_sec "${sec}" stomp
+		for param in ${opts}; do
+			pvalue="$(get_param_value_from_dump "${inst}"."${param}")"
+			uci_set obuspa "${sec}" "${param}" "${pvalue}"
+		done
+		uci_set obuspa "${sec}" "_sync" "1"
+	done
+}
+
+sync_update_sec()
+{
+	local _sync
+	config_get _sync "${1}" _sync ""
+	if [ -z "${_sync}" ]; then
+		uci_remove obuspa "${1}"
+		log "Deleting obuspa.${1} section ..."
+	else
+		uci_remove obuspa "${1}" _sync
+	fi
+}
+
+sync_uci_with_db()
+{
+	if [ ! -f "${DB_DUMP}" ]; then
+		return 0;
+	fi
+
+	config_load obuspa
+	sync_db_controller
+	sync_db_localagent_mtp
+	sync_db_mqtt_client
+	sync_db_stomp_connection
+	uci_commit obuspa
+
+	config_load obuspa
+	config_foreach sync_update_sec controller
+	config_foreach sync_update_sec mtp
+	config_foreach sync_update_sec mqtt
+	config_foreach sync_update_sec stomp
+	uci_commit obuspa
+}
+
+delete_sql_db_entry_with_pattern()
+{
+	local params pattern
+
+	pattern="${1}"
+	if [ ! -f "${DB_DUMP}" ]; then
+		return 0;
+	fi
+
+	if [ "${#pattern}" -lt 7 ]; then
+		return 0;
+	fi
+
+	#log "Deleting with pattern [${pattern}] from ${DB_DUMP}"
+	sed -i "/${pattern}/d" ${DB_DUMP}
+}
+
+check_n_delete_db()
+{
+	local sec t r path
+
+	sec="${1}"
+	if uci -q get obuspa."${sec}" >/dev/null 2>&1; then
+		return 0
+	fi
+
+	t="${2}"
+	r="${3}"
+	sec="${sec/${t}_/cpe-}"
+
+	path=$(grep -E "${r}\d+.Alias \"${sec}\"" ${DB_DUMP})
+	path=${path%.*}
+
+	delete_sql_db_entry_with_pattern "${path}"
+}
+
+workaround_remove_download_pattern()
+{
+	local inst
+
+	inst="$(cat ${DB_DUMP} |grep -E "Device.DeviceInfo.FirmwareImage.\d.Download()"|grep -oE "Device.LocalAgent.Request.\d.")"
+
+	if [ -n "${inst}" ]; then
+		log "Workaround to remove the old download Request [$inst]"
+		delete_sql_db_entry_with_pattern "${inst}"
+	fi
+}
+
+reverse_update_db_with_uci()
+{
+	if [ ! -f "${DB_DUMP}" ]; then
+		return 0;
+	fi
+
+	export UCI_CONFIG_DIR="/tmp/obuspa"
+	config_load obuspa
+	config_foreach check_n_delete_db controller controller "Device.LocalAgent.Controller."
+	config_foreach check_n_delete_db mtp mtp "Device.LocalAgent.MTP."
+	config_foreach check_n_delete_db mqtt mqtt "Device.MQTT.Client."
+	config_foreach check_n_delete_db stomp stomp "Device.STOMP.Connection."
+	unset UCI_CONFIG_DIR
+}
+
+# Create factory reset file
+db_init()
+{
+	local reason role_file
+
+	reason="${1}"
+	mkdir -p /tmp/obuspa/
+
+	# Load configuration
+	config_load $CONFIGURATION
+	config_get SQL_DB_FILE global db_file "/tmp/obuspa/usp.db"
+	config_get role_file global role_file ""
+
+	if [ -f "${SQL_DB_FILE}.old" ] && [ ! -f "${SQL_DB_FILE}" ]; then
+		log "Copying old db, since new db not present ..."
+		mv ${SQL_DB_FILE}.old ${SQL_DB_FILE}
+	fi
+
+	# Dump datamodel parameters from DB
+	if [ -f "${SQL_DB_FILE}" ]; then
+		dump_db
+	fi
+
+	# In case of Reboot or service restart update the uci
+        # from usp.db file
+	if [ -f "${DB_DUMP}" ] && [ "${reason}" != "update" ]; then
+		# Only do this if db have reasonable data
+		val="$(awk 'END{print NR}' ${DB_DUMP})"
+		if [ "$val" -gt 15 ]; then
+			log "Syncing obuspa uci with usp.db ...."
+			sync_uci_with_db
+		fi
+	fi
+
+	# remove entries from db if deleted from uci, only in case of reload
+	if [ -f "${DB_DUMP}" ] && [ "${reason}" = "update" ] && [ -f "/tmp/obuspa/obuspa" ]; then
+		log "Deleting entries from usp.db if uci not present ...."
+		reverse_update_db_with_uci
+	fi
+
+	# Remove reset file if present
+	[ -f "${RESET_FILE}" ] && mv ${RESET_FILE} ${RESET_FILE}.old
 
 	#log "Create reset file ...."
 	config_load $CONFIGURATION
-	config_get dualstack_pref global dualstack_pref "IPv6"
-
-	log "Enforce uci values, no boot marker"
 	global_init
 	config_foreach configure_localagent localagent
 	global_init
@@ -701,13 +1001,20 @@ db_init()
 	config_foreach configure_subscription subscription
 	global_init
 	config_foreach configure_challenges challenge
-
-	# enforce ctrust only on upgrades, not on reloads
-	if [ -f "${CTRUST_RESET_FILE}" ] && [ -z "${reason}" ]; then
-		cat ${CTRUST_RESET_FILE} >> ${RESET_FILE}
-	fi
+	global_init
 	update_reset_reason
-	update_dual_stack_pref "${dualstack_pref}"
+	uci_commit ${CONFIGURATION}
+
+	cp /etc/config/obuspa /tmp/obuspa/
+	if [ -f "${DB_DUMP}" ]; then
+		workaround_remove_download_pattern
+		mv ${DB_DUMP} ${RESET_FILE}
+	fi
+
+	if [ -f "${CTRUST_RESET_FILE}" ]; then
+		cat ${CTRUST_RESET_FILE} >> ${RESET_FILE}
+		rm ${CTRUST_RESET_FILE}
+	fi
 }
 
 start_service() {
@@ -719,18 +1026,21 @@ start_service() {
 
 	procd_open_instance ${CONFIGURATION}
 	if [ "${enabled}" -eq 1 ]; then
-		procd_set_param command ${PROG}
 		db_init "${1}"
+		procd_set_param command ${PROG}
 		configure_obuspa
 		procd_set_param respawn \
 			"${respawn_threshold:-10}" \
 			"${respawn_timeout:-10}" "${respawn_retry:-5}"
+		#procd_set_param limits core="unlimited"
 	fi
 	procd_close_instance ${CONFIGURATION}
 }
 
 stop_service() {
-	${PROG} -c stop
+	if command -v timeout >/dev/null 2>&1; then
+		timeout 5 ${PROG} -c stop
+	fi
 }
 
 reload_service() {
@@ -739,6 +1049,5 @@ reload_service() {
 }
 
 service_triggers() {
-	export PROCD_RELOAD_DELAY=3000
 	procd_add_reload_trigger "obuspa"
 }

obuspa/files/etc/init.d/usptest

@@ -0,0 +1,75 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+USE_PROCD=1
+
+log()
+{
+	echo "$*"|logger -t usptest -p debug
+}
+
+get_oui_from_db()
+{
+	db -q get device.deviceinfo.ManufacturerOUI
+}
+
+get_serial_from_db()
+{
+	db -q get device.deviceinfo.SerialNumber
+}
+
+publish_endpoint()
+{
+	local AgentEndpointID serial oui user pass
+
+	if ! uci -q get obuspa.testmqtt; then
+		return 0;
+	fi
+
+	# return if mosquitto_pub is not present
+	if [ ! "$(command -v mosquitto_pub)" ]; then
+		log "mosquitto_pub not present can't publish EndpointID"
+		return 0;
+	fi
+
+	sleep 2
+	# Get endpoint id from obuspa config first
+	config_load obuspa
+	config_get AgentEndpointID localagent EndpointID ""
+	if [ -z "${AgentEndpointID}" ]; then
+		serial=$(get_serial_from_db)
+		oui=$(get_oui_from_db)
+		AgentEndpointID="os::${oui}-${serial//+/%2B}"
+	fi
+
+	config_get user testmqtt Username ""
+	config_get pass testmqtt Password ""
+
+	# publish Agent's EndpointID in mosquito broker for discovery by usp-js
+	# This is a work around till obuspa adds supports for mDNS discovery
+	if [ -n "${user}" ] && [ -n "${pass}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username, password"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}" -P "${pass}"
+	elif [ -n "${user}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username only"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}"
+	else
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}"
+	fi
+}
+
+start_service() {
+	procd_open_instance usptest
+	publish_endpoint
+	procd_close_instance
+}
+
+reload_service() {
+	publish_endpoint
+}
+
+service_triggers() {
+	procd_add_reload_trigger "mosquitto" "obuspa"
+}