voice-client: make line indexing platform independent

easy-soc-libs/Makefile

@@ -5,15 +5,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=2.0.1
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=47801a723c110a4af11748c87831562401117f2d
+PKG_SOURCE_VERSION:=c656cd47a9f911cfe3946e3d4a374b4ae9e5d801
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 endif
 
@@ -37,7 +37,7 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route
+  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
 endef
 
 define Package/libethernet

gryphon-led-module/src/sk9822.h

@@ -22,7 +22,7 @@
 #include <linux/types.h>
 
 #define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+#define SK9822_DEFAULT_BRIGHTNESS 1  // 5-bit brightness, 0-31
 
 typedef struct {
 	uint8_t b;

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-07-03
+PKG_VERSION:=4.0-2019-05-21
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b0f29f5102d5ade78b586d190abb521fcc668b78
+PKG_SOURCE_VERSION:=3ae6954f55e90a339561719a0328c0cf3a4b018c
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -215,7 +215,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
 endef
 
 define Package/icwmp_udpechoserver/install

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-[ -f /etc/config/cwmp_xmpp ] || exit 0
-
-[ "$ACTION" == "ifup" ] || exit 0
-[ "$INTERFACE" == "loopback" ] && exit 0
-
-local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-/etc/init.d/icwmp_xmppd reload &
-

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=6406325e72d7ddd0ff7aaa3a87669519021bdb11
+PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/init.d/netmode

@@ -12,7 +12,7 @@ start_netmoded() {
 	procd_open_instance
 	procd_set_param command $NETMODED
 
-	procd_append_param command --verbose warning -i macaddr
+	procd_append_param command --verbose warning
 	procd_set_param stdout 1
 	procd_set_param stderr 1
 

netmode/files/etc/netmodes/bridged/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/disable_ubusproxy.sh

@@ -1,2 +0,0 @@
-uci -q set owsd.ubusproxy.enable="0"
-uci -q commit owsd

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'

netmode/files/etc/netmodes/routed_mtk/omcproxy

@@ -0,0 +1,10 @@
+config proxy
+	option scope global
+	option uplink wan
+	list downlink lan
+
+config proxy
+	option scope global
+	option uplink wan6
+	list downlink lan
+

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto

netmode/files/lib/functions/netmode.sh

@@ -121,13 +121,8 @@ run_netmode_scripts() {
 	local mode=$1
 	local when=$2
 	local script
-	local path
-
-	path=$(readlink -f /etc/netmodes/$mode/)
-	[ "${path:0:14}" == "/etc/netmodes/" ] || exit
-
 	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
-		logger -s -p user.info -t "netmode" "Executing $when netmode scripts" >/dev/console
+		logger -s -p user.info -t $0 "[netmode] Executing $when netmode scripts" >/dev/console
 		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
 			sh /etc/netmodes/$mode/scripts/$when/$script
 		done
@@ -190,7 +185,7 @@ switch_netmode() {
 	mkdir -p $CONF_BACKUP_DIR
 	cp -af /etc/config/* $CONF_BACKUP_DIR
 
-	logger -s -p user.info -t "netmode" "Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
+	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
 
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
@@ -215,10 +210,11 @@ switch_netmode() {
 	case "$curmode" in
 		repeater*)
 			touch $SWITCHMODELOCK
-			logger -s -p user.info -t "netmode" "Switching to $curmode mode" > /dev/console
+			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
 			ubus call leds set  '{"state" : "allflash"}'
+			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
+			[ -f /etc/init.d/igmpproxy ] && /etc/init.d/igmpproxy stop
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call network reload
 			wifi reload nodat
 			ubus call router.network reload
@@ -229,7 +225,6 @@ switch_netmode() {
 		;;
 		*)
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call uci commit '{"config":"network"}'
 		;;
 	esac
@@ -243,7 +238,7 @@ revert_netmode() {
 	local rready="$3"
 
 	ubus call leds set  '{"state" : "allflash"}'
-	logger -s -p user.info -t "netmode" "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
+	echo "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
 	uci -q set netmode.setup.curmode="$to"
 	uci -q set netmode.setup.repeaterready="$rready"
 	uci commit netmode
@@ -252,7 +247,7 @@ revert_netmode() {
 	rm -rf $CONF_BACKUP_DIR
 	rm -rf $OLD_MODE_FILE
 
-	logger -s -p user.info -t "netmode" "Restarting network services" > /dev/console
+	echo "Restarting network services" > /dev/console
 	ubus call network reload
 	wifi reload
 	ubus call router.network reload
@@ -293,10 +288,10 @@ wait_for_netmode_handler() {
 
 netmode_get_ip_type() {
 	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t $0 "netmode_get_ip_type: ip $1 is private"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
 		echo "private"
 	} || {
-		logger -t $0 "netmode_get_ip_type: ip $1 is public"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
 		echo "public"
 	}
 }
@@ -384,7 +379,7 @@ populate_netmodes() {
 	done
 
 	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude support
+	local keys lang desc exp exclude
 	for mode in $(ls $MODEDIR); do
 
 			case "$mode" in
@@ -414,23 +409,6 @@ populate_netmodes() {
 				done
 				json_select ..
 				[ $exclude -eq 1 ] && continue
-			elif json_select supported_boards; then
-				support=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							support=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $support -eq 1 ] || {
-					uci -q delete netmode.$mode
-					continue
-				}
 			fi
 
 			if json_select acl; then

netmode/files/usr/libexec/rpcd/repeater

@@ -100,7 +100,7 @@ get_wifi_iface_cfgstr() {
 case "$1" in
 	list)
 		if [ $WIFISTA -eq 1 ]; then
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {}, "wps_enroll": {}, "wps_stop": {} }'
+			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {} }'
 		else
 			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
 		fi
@@ -211,30 +211,6 @@ case "$1" in
 				json_add_int "code" $code
 				json_dump
 			;;
-			wps_enroll)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set WscConfMode=1
-					iwpriv $wetif set WscMode=2
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set WscGetConf=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
-			wps_stop)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set WscStop=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
 		esac
 	;;
 esac

obuspa/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=obuspa
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a87f104d37161b157aa2d3bc874a636affe6717f
-PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/obuspa
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=USP agent
-  DEPENDS:=+libcoap +libopenssl +libcurl +libsqlite3 +libcares +libubox +libubus +libblobmsg-json +uspd
-endef
-
-define Package/obuspa/description
- OB-USP-AGENT is a system daemon providing a User Services Platform (USP) Agent.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-ifneq ($(CONFIG_USE_MUSL),)
-TARGET_CFLAGS += -DUSE_MUSL
-endif
-
-#define Build/Prepare
-#        $(CP) -rf ./obuspa/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/obuspa/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,14 +0,0 @@
-config controller
-	option endpointid 'self::usp-controller.com'
-
-config mtp
-	option enable 'true'
-	option protocol 'STOMP'
-	option destination 'uspq'
-
-config connection
-	option host 'usp-controller.com'
-	option username 'username'
-	option password 'password'
-	option encryption 'false'
-

obuspa/files/etc/init.d/obuspa

@@ -1,105 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-PROG=/usr/sbin/obuspa
-
-CTRL_PATH="Device.LocalAgent.Controller.1."
-MTP_PATH="Device.LocalAgent.MTP.1."
-CONN_PATH="Device.STOMP.Connection.1."
-
-log() {
-	echo "${@}"|logger -t obuspa -p debug
-}
-
-db_set() {
-	log "DBSET param|${1}| value|${2}|"
-	${PROG} -c dbset ${1} ${2}
-}
-
-validate_controller_section()
-{
-	uci_validate_section obuspa controller "${1}" \
-		'endpointid:string:"self:usp-controller.com"'
-}
-
-validate_mtp_section()
-{
-	uci_validate_section obuspa mtp "${1}" \
-		'enable:bool:true' \
-		'protocol:string:"STOMP"' \
-		'destination:string:'
-}
-
-validate_connection_section()
-{
-	uci_validate_section obuspa connection "${1}" \
-		'host:string:"usp-controller.com"' \
-		'username:string:username' \
-		'password:string:password' \
-		'encryption:bool:true'
-}
-
-configure_controller() {
-	local endpointid
-
-	validate_controller_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${CTRL_PATH}EndpointID" ${endpointid}
-}
-
-configure_mtp() {
-	local protocol enable destination
-
-	validate_mtp_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${MTP_PATH}Enable" ${enable}
-	db_set "${MTP_PATH}Protocol" ${protocol}
-	db_set "${MTP_PATH}STOMP.Destination" ${destination}
-}
-
-configure_connection() {
-	local host username password encryption
-
-	validate_connection_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${CONN_PATH}Host" ${host}
-	db_set "${CONN_PATH}Username" ${username}
-	db_set "${CONN_PATH}Password" ${password}
-	db_set "${CONN_PATH}X_ARRIS-COM_EnableEncryption" ${encryption}
-}
-
-db_init() {
-	[ -f /tmp/usp.db ] && rm -f /tmp/usp.db
-
-	config_load obuspa
-	config_foreach configure_controller controller
-	config_foreach configure_mtp mtp
-	config_foreach configure_connection connection
-}
-start_service() {
-	db_init
-
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_append_param command -p -v 4
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "obuspa"  /etc/init.d/obuspa restart
-}
-

owsd/Makefile

@@ -10,7 +10,7 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=8a2b9ba61be4f13111b32dbef9e97eb40aea5866
+PKG_SOURCE_VERSION:=f1d6bff1971640006b3137b342fafa1c40cfb835
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
@@ -61,9 +61,6 @@ define Package/owsd/install
 	$(INSTALL_CONF) ./files/owsd.config $(1)/etc/config/owsd
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_BIN) ./files/owsd.hotplug $(1)/etc/hotplug.d/iface/55-owsd
-ifeq ($(CONFIG_OWSD_UPROXYD),y)
-	$(CP) ./uproxy-files/* $(1)/
-endif
 endef
 
 define Package/owsd-testdata

owsd/files/owsd.config

@@ -5,8 +5,8 @@ config owsd 'global'
 #	option www_maxage '3600'
 
 # ubusproxy is enbaled if: enable = 1 or peer exists or path exists
-#config ubusproxy 'ubusproxy'
-#	option enable '0'
+config ubusproxy 'ubusproxy'
+	option enable '0'
 #	list peer 'wss://repeater_hostname/'
 #	list peer 'wss://192.168.1.101/'
 #	list object 'router.*'
@@ -30,12 +30,12 @@ config owsd-listen 'lan'
 	option whitelist_interface_as_origin '1'
 	option whitelist_dhcp_domains '1'
 
-#config owsd-listen 'lan_8080'
-#	option port '8080'
-#	option interface 'lan'
-#	option ipv6 'on'
-#	option whitelist_interface_as_origin '1'
-#	option whitelist_dhcp_domains '1'
+config owsd-listen 'lan_8080'
+	option port '8080'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
 
 #config owsd-listen 'lan_https'
 #	option port '443'

owsd/files/owsd.init

@@ -126,8 +126,8 @@ validate_owsd_global() {
 
 }
 
-append_str() {
-	json_add_string "" "$1"
+append_origin() {
+	procd_append_param command -o"$1"
 }
 
 append_origin_parts() {
@@ -137,9 +137,9 @@ append_origin_parts() {
 	port="$3"
 
 	if [ "${proto}" = "https" -a "${port}" -eq 443 -o "${proto}" = "http" -a "${port}" -eq 80 ]; then
-		append_str "${proto}://${host}"
+		append_origin "${proto}://${host}"
 	else
-		append_str "${proto}://${host}:${port}"
+		append_origin "${proto}://${host}:${port}"
 	fi
 }
 
@@ -150,7 +150,6 @@ validate_owsd_iface() {
 		'origin:list(string)' \
 		'whitelist_interface_as_origin:bool:0' \
 		'whitelist_dhcp_domains:bool:0' \
-		'whitelist_all_origins:bool:0' \
 		'ipv6:bool:1' \
 		'ipv6only:bool:0' \
 		'linklocal:bool:0' \
@@ -164,7 +163,7 @@ validate_owsd_iface() {
 }
 
 parse_owsd_iface() {
-	local port interface whitelist_interface_as_origin whitelist_dhcp_domains whitelist_all_origins ipv6 ipv6only linklocal
+	local port interface whitelist_interface_as_origin whitelist_dhcp_domains ipv6 ipv6only linklocal
 	local cert key ca
 	local restrict_to_user
 	local ubusx_acl
@@ -176,36 +175,24 @@ parse_owsd_iface() {
 
 	# utility function
 	new_listen_socket() {
-		json_add_int "port" ${port}
+		procd_append_param command -p "${port}"
 
-		[ -n "${cert}"      ] && json_add_string "cert" "${cert}"
-		[ -n "${key}"       ] && json_add_string "key" "${key}"
-		[ -n "${ca}"        ] && json_add_string "ca" "${ca}"
+		procd_append_param command -L"$1"
 
-		[ -n "${restrict_to_user}" ] && {
-			json_add_array "restrict_to_user"
-			config_list_foreach "$1" "restrict_to_user" append_str
-			json_close_array
-		}
-		[ -n "$2" ] && json_add_string "interface" "$2"
+		[ -n "${cert}"      ] && procd_append_param command -c"${cert}"
+		[ -n "${key}"       ] && procd_append_param command -k"${key}"
+		[ -n "${ca}"        ] && procd_append_param command -a"${ca}"
 
-		[ -n "${ubusx_acl}" ] && json_add_string "ubusx_acl" "$ubusx_acl"
+		[ -n "${restrict_to_user}" ] && procd_append_param command -u"${restrict_to_user}"
+
+		[ -n "$2" ] && procd_append_param command -i"$2"
+
+		[ -n "${ubusx_acl}" ] && procd_append_param command -X"${ubusx_acl}"
 
 	}
 
-	origin_whitelist_all() {
-		[ "$1" = "*" ] && echo "true"
-	}
-
-	append_whitelists() {
-		config_list_foreach "$1" "origin" append_str
-
-		[ -n "$2" ] && whitelist_all_origins=1
-
-		if [ "$whitelist_all_origins" -eq 1 ]; then
-			whitelist_dhcp_domains=1
-			whitelist_interface_as_origin=1
-		fi
+	append_whitelists () {
+		config_list_foreach "$1" "origin" append_origin
 
 		if [ "$whitelist_dhcp_domains" -eq 1 ]; then
 			for domain in $DHCP_DOMAINS; do
@@ -225,22 +212,13 @@ parse_owsd_iface() {
 	if [ -n "${interface}" ]; then
 		# 1 listen-socket (vhost) for each IP address on that network's iface
 
-		whitelist=$(config_list_foreach "$1" "origin" origin_whitelist_all)
-
 		# ipv4 addresses
 		if [ "${ipv6only}" -eq 0 ]; then
 			network_get_ipaddrs ip4addrs "${interface}";
 		fi
-
-		json_add_array "$1"
 		for addr in ${ip4addrs}; do
-			json_add_object "${1}"
 			new_listen_socket "$1" "${addr}"
-			[ -n "$whitelist" -o "$whitelist_all_origins" -eq 1 ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_close_object
+			append_whitelists "$1"
 		done
 
 		# ipv6 addresses
@@ -252,24 +230,16 @@ parse_owsd_iface() {
 				ip6addrs="${ip6addrs} ${linklocaladdrs}"
 			fi
 		fi
-
 		for addr in ${ip6addrs}; do
-			json_add_object "${1}6"
 			new_listen_socket "$1" "${addr}"
 			addr="\\[${addr}]"
-			[ -n "$whitelist" ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_add_boolean "ipv6" 1
-			json_close_object
+			append_whitelists "$1"
+			procd_append_param command -66
 		done
-		json_close_array
-
 	else
 		new_listen_socket "$1"
-		if [ "${ipv6}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
-		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
+		if [ "${ipv6}" -eq 1 ]; then procd_append_param command -6; fi
+		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then procd_append_param command -6; fi
 
 		append_whitelists "$1"
 	fi
@@ -293,49 +263,39 @@ start_service() {
 		echo "Global validation failed"
 		return 1
 	}
-	json_init
-	json_add_object "global"
-	[ -n "${sock}"       ] && json_add_string "socket" "$sock"
-	[ -n "${www}"        ] && json_add_string "www" "$www"
-	[ -n "${redirect}"   ] && json_add_string "redirect" "$redirect"
-	[ -n "${www_maxage}" ] && json_add_int "www_maxage" "$www_maxage"
-	json_close_object
 
-	validate_owsd_ubusproxy && {
-		if [ "${enable}" -eq 1 ]; then
-			json_add_object "ubusproxy"
+	[ -n "${sock}"      ] && procd_append_param command -s"${sock}"
+	[ -n "${www}"       ] && procd_append_param command -w"${www}"
+	[ -n "${redirect}"  ] && procd_append_param command -r"${redirect}"
+	[ -n "${www_maxage}" ] && procd_append_param command -t"${www_maxage}"
 
-			[ -n "${peer_cert}" ] && json_add_string "peer_cert" "${peer_cert}"
-			[ -n "${peer_key}"  ] && json_add_string "peer_key" "${peer_key}"
-			[ -n "${peer_ca}"   ] && json_add_string "peer_ca" "${peer_ca}"
-
-			append_peer () {
-				[ -n "$1"   ] && json_add_string "peer" "$1"
-			}
-
-			append_object () {
-				[ -n "$1"   ] && json_add_string "object" "$1"
-			}
-
-			json_add_array "peer"
-			config_list_foreach "ubusproxy" "peer" append_peer
-			json_close_array
-			json_add_array "object"
-			config_list_foreach "ubusproxy" "object" append_object
-			json_close_array
-
-			[ "${prefix}" == "mac" ] && json_add_string "prefix" "mac"
-			json_close_object
-		fi
+	validate_owsd_ubusproxy || {
+		echo "Ubusproxy validation failed"
+		return 1
 	}
 
-	json_add_object "owsd-listen"
-	config_foreach parse_owsd_iface "owsd-listen"
-	json_close_object
+	if [ "${enable}" -eq 1 ]; then
+		procd_append_param command -U
 
-	[ ! -d "/tmp/owsd" ] && mkdir /tmp/owsd
-	json_dump > /tmp/owsd/owsd_cfg.json
-	procd_append_param command -f "/tmp/owsd/owsd_cfg.json"
+		[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
+		[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
+		[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
+
+		append_peer () {
+			[ -n "$1"   ] && procd_append_param command -P"$1"
+		}
+
+		append_object () {
+			[ -n "$1"   ] && procd_append_param command -U"$1"
+		}
+
+		config_list_foreach "ubusproxy" "peer" append_peer
+		config_list_foreach "ubusproxy" "object" append_object
+
+		[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
+	fi
+
+	config_foreach parse_owsd_iface "owsd-listen"
 
 #	procd_set_param stderr 1
 	procd_set_param respawn

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.crt

@@ -1,19 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIDHzCCAgegAwIBAgIJAKmrHnhgM9CZMA0GCSqGSIb3DQEBCwUAMCYxJDAiBgNV
-BAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBnYXRld2F5czAeFw0xOTA0MjcxMDQ4MTJa
-Fw0yNzA3MTQxMDQ4MTJaMCYxJDAiBgNVBAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBn
-YXRld2F5czCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAM7i0RqyVvpl
-WVm4ioXV7H/5oII6nmlGb+eQM4p0QBujhyvwtT6z0L0KXwwWRGFdYBNChBfsi9zm
-AAhgQaR5D/QPRGDIiB69O3iBd2JFqzxo1rkN/nUMbZ2OplXRscmOs34yT68hV0ov
-nv0iAr06bzyoa2sxOfN262Ic2tKYG5UYtRVnbaX40U80DYm1tvoeJfZgTiZmeuky
-7t6PrWhJ+tfKdzK+IGDsIQ3k4k+3AfS8dwDEBbGocFhx+sOG/yv5OhGlZ3dH9toz
-Gq+xrkawoa0hkKKVOFhNINdHcPG0UH7iET779nsgylT/8OGkQG3vLSBkVJ8rAaAh
-j9vKBWdxIG0CAwEAAaNQME4wHQYDVR0OBBYEFMsfty2iwKt5U+WLdsYpgYVX1ZX2
-MB8GA1UdIwQYMBaAFMsfty2iwKt5U+WLdsYpgYVX1ZX2MAwGA1UdEwQFMAMBAf8w
-DQYJKoZIhvcNAQELBQADggEBALv1l6C94e6Xos4DkiIDToLQasO0nQLcq3eZhsa6
-XJgWnBcoe7p4iLXzHzutacwTj/mx+ptbLkyqPzvIsufKeQf3hat5ICtCLZOpOW55
-fPc4GY4TMixEJDzt3L5U89BXVFTSh7aY5KbphD9zQgYcy1IpkEEPtSOL8B8KWdHb
-lrW1AE9p7YLHb4YgtS6NjEN04a1wHug/flcfes4u9DOnmJzSih9p8UtQP86hjiPK
-C9znwLrbbrJANz4D6QSTtTT+qi8iQo68sKXYLyUC10Kp19pq1FMnfY1IkCcBDSip
-hbGdxwd4txkrl52YZyuo14mXRGP/c2lvEO0a1P6IpR2kMj4=
------END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.key

@@ -1,27 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIEpAIBAAKCAQEAzuLRGrJW+mVZWbiKhdXsf/mggjqeaUZv55AzinRAG6OHK/C1
-PrPQvQpfDBZEYV1gE0KEF+yL3OYACGBBpHkP9A9EYMiIHr07eIF3YkWrPGjWuQ3+
-dQxtnY6mVdGxyY6zfjJPryFXSi+e/SICvTpvPKhrazE583brYhza0pgblRi1FWdt
-pfjRTzQNibW2+h4l9mBOJmZ66TLu3o+taEn618p3Mr4gYOwhDeTiT7cB9Lx3AMQF
-sahwWHH6w4b/K/k6EaVnd0f22jMar7GuRrChrSGQopU4WE0g10dw8bRQfuIRPvv2
-eyDKVP/w4aRAbe8tIGRUnysBoCGP28oFZ3EgbQIDAQABAoIBACYwBcr4ukdT589A
-2gjkONhSeocvTMg/4S4MFwdqd97iK3Q35SyiwlfyjyLLBWo3cyF6+Kj118c5iS4C
-nns+gWxaWRPIUB/kbBLNSv0PwRDQhTn5VEvEtIMNrrROlZOPzJ/xp3W7IMKn0aAF
-5B2LqLa4m8NYfcrr23zruJSA0S6O4O9+E2ilI0bLwMPmSEbrRhDYvOUUTP5bqWAy
-DUcOZQp26LIbx9B1gBA9XcQADjSR59ZY0vUCh6Rhd9qmJ2ZVAj78hv7yLkGOUOwS
-O9LnvBQjb7AZ9YNntTx/YlNLtbEMLfhv1/tpBZ8jVa9ZvCNBWNmrzpSCIEzhcQUY
-jv+WGyECgYEA718+bHissVTet0kcuC18XCbdg7LelOws9aSo0ZgQaRCr7BjTXNMi
-NrQPira0QmGyWtQ5eoxLw0s44b8ol0I+zwqA9q5bRMvdNUaZxE01ObC0aaZx0Sex
-51exHN7knVyWS94kMGBYQRQW5ElrmOTUUFN9WOVwsIuhx22hUd8XZ4UCgYEA3UHf
-jWzbdWlOw8ZB7hOu6MS46IFuKdztblHu3n+qw65x9i6VHy5yL8+dDOiFa8earpyP
-bPNuDr0URTj6Xu4OzQ04gLXE3SXghSKZPSOq9UoJ56fw6wXq2Dtz5rFGD4Mt+WHR
-/NiWccKSkA+x0bu8ab2hYBIAeURfqSQfAcmiRckCgYEAmTElLBpWuu6L0lTyElTZ
-38fnwB87H6e+Zj7I48ojxnmq7WA99IwSu1ulDqs61bjcghCL8IfU/NkpQCAshBEb
-TTl1q2mOc4rcuPnD8sNOqusRqwOgl7CFxH50lPt459SXQ1qZYnRmRs/qjpMGT0Uz
-M20bLUc5RWM3WAArW9AglFkCgYAdk+XHqSq5SmeeIk3D/tueAFZbtpm8fO08lzVg
-hx6T5CkV6OpEbdgT7iQnipnza46RExrVTMGEtOAV1OUbdaWC4eaQxjvX+G1IPvTP
-SIpdGhWy4y+Aq5zWZTQ8PayI/FdUBDCnJWkPMhyXp5F04Szx0cjV5/IqQ+qp2MtQ
-WN0ZiQKBgQDT7UFw5svbtjzE6pcjImRSDI4BwmA8F6C7bkK3M5mu10k+/kr5jDGG
-xgByyY61TY3TpHKLOmuxqKb3nOy8umPlFt3P7xpYTuV5+dZRrbIFKtDy2uKkYi9E
-N5xyVfanlXhlU7JoJtc2Xtkdjr5SwESHjNSjR8jDG/sd7opjeltOZg==
------END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.srl

@@ -1 +0,0 @@
-514CD4028F0A688DAD8236D20F352623455A4D74

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.crt

@@ -1,18 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIC+zCCAeMCFFFM1AKPCmiNrYI20g81JiNFWk10MA0GCSqGSIb3DQEBCwUAMCYx
-JDAiBgNVBAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBnYXRld2F5czAeFw0xOTA2MjQx
-NzEwMjhaFw0yOTA2MjExNzEwMjhaME4xCzAJBgNVBAYTAlNFMRIwEAYDVQQIDAlT
-dG9ja2hvbG0xFTATBgNVBAoMDGlvcHN5cywgSW5jLjEUMBIGA1UEAwwLVUJVUy1Y
-IERlbW8wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDosnAz7cNKUCWZ
-9+qFs8PpV1J1o+Eq6Hv3Bc5ceNrPxcEsE2vDWQdl7QXU9Je++xILSxfvljHIUO7D
-8AOcH03NO3N0F1H4KhmYIRjTKogQL8y/YIGFkzL4bZXwXRtvzXxMYNtdX4Lbdiyc
-AtGTiSWJ3zBtShPGPFqgR4JpYmf3VaVy/f74tRdUL86rnVNaU5OIBMHGLLxwMf2Z
-w3MPKSNj1ATcNoegKvMvHpd7FE2o5lDgFkUV3b8QqcAFTrmLXx6mYYpo9Fo1KHrA
-6SiUP0KQ/lkQ28yfkvzmN4JpJtLpomzscn9nmJfbI5g3GezSGGFHDAyW/Y2c+VPN
-N9C9n/NhAgMBAAEwDQYJKoZIhvcNAQELBQADggEBAFEBujnBMhFVqLUPnDM41Cd0
-ZzbY5n/haBN885xQP0tNdCJ9qN0L8dr8bDe1IR02WHZ4UIXzvOj20Nu2+AFP1OCG
-CEEPLTQwlaJhaBzhnfLaxb7XCHqVodKBiYDYLQLFNdY9wYOKvyNI5xXMtPbH5fUK
-GJA4bZTbL5c4iaqtdXwLE/6a9FCtfGsv9k70tPw+KYR4tcA2t3SS2Oe/bGRrj5yQ
-Tjy0P7R033S4GlrsCRa7sRGg8yd7TgNpGsgyncsFRLHDG4V71I9NhOkoHR64oUfT
-YVPt/16TIi31vF5FJO4TJtbA2wEpUWPk7x2VjIOvvauMoYE6Hf3YLatzdaIQNHo=
------END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.csr

@@ -1,16 +0,0 @@
------BEGIN CERTIFICATE REQUEST-----
-MIICkzCCAXsCAQAwTjELMAkGA1UEBhMCU0UxEjAQBgNVBAgMCVN0b2NraG9sbTEV
-MBMGA1UECgwMaW9wc3lzLCBJbmMuMRQwEgYDVQQDDAtVQlVTLVggRGVtbzCCASIw
-DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAOiycDPtw0pQJZn36oWzw+lXUnWj
-4Sroe/cFzlx42s/FwSwTa8NZB2XtBdT0l777EgtLF++WMchQ7sPwA5wfTc07c3QX
-UfgqGZghGNMqiBAvzL9ggYWTMvhtlfBdG2/NfExg211fgtt2LJwC0ZOJJYnfMG1K
-E8Y8WqBHgmliZ/dVpXL9/vi1F1QvzqudU1pTk4gEwcYsvHAx/ZnDcw8pI2PUBNw2
-h6Aq8y8el3sUTajmUOAWRRXdvxCpwAVOuYtfHqZhimj0WjUoesDpKJQ/QpD+WRDb
-zJ+S/OY3gmkm0umibOxyf2eYl9sjmDcZ7NIYYUcMDJb9jZz5U8030L2f82ECAwEA
-AaAAMA0GCSqGSIb3DQEBCwUAA4IBAQDWLgiuSq41EX4J5v5RH2gE3Ywr1FdzPMMe
-SCJxYL3JOcIvDl0aNyx2bAd9Gc6Zj8uRXT8gDsB3cEgAoHdGjiZB0uoNV/Auz6kS
-mYNnmpcZfAw775cBQpYBZvg2CRFqsv8mD4/OhBmoRjMpoosLkAYPuRmE58U/Ah+6
-9MJIzVca6dn7iLMLVWndkCoD9OUwBZNHU+SGTkn0IKUGyMUTmduADPBGbB7mYg6j
-DQsHiR1v7/ngb3uaQoVS8QA+XYmTUa1UZ+/83cmzjvf17rG10KwrJZh0lQNVUt5d
-gvH8aUvQq92xcXYQlhLfVFkqxmrLZNR0rIEeUVwYvVawPK8ZR+UK
------END CERTIFICATE REQUEST-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.key

@@ -1,27 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA6LJwM+3DSlAlmffqhbPD6VdSdaPhKuh79wXOXHjaz8XBLBNr
-w1kHZe0F1PSXvvsSC0sX75YxyFDuw/ADnB9NzTtzdBdR+CoZmCEY0yqIEC/Mv2CB
-hZMy+G2V8F0bb818TGDbXV+C23YsnALRk4klid8wbUoTxjxaoEeCaWJn91Wlcv3+
-+LUXVC/Oq51TWlOTiATBxiy8cDH9mcNzDykjY9QE3DaHoCrzLx6XexRNqOZQ4BZF
-Fd2/EKnABU65i18epmGKaPRaNSh6wOkolD9CkP5ZENvMn5L85jeCaSbS6aJs7HJ/
-Z5iX2yOYNxns0hhhRwwMlv2NnPlTzTfQvZ/zYQIDAQABAoIBAQC+o9IA+T4R1++2
-YMImn8xVk1DfSE/lE2rcSklywSCjMGS+c3rKJFpHSxSID4tyz8dMsUz+4JIQhx3W
-MQEEGzFmftprtd9V7UfittrbxfCLMl4QPERg5uPPXBiHQACGbFb1TDTsHp/apMqP
-Vk/VC3tRpSTLpPDma/PjdDKHnDOJEXXvIiI6lWzDjkFS8cmb+ZChAVJSAVDpM3v5
-OjtH6Cfn7QnlQh5v6OEcScmdHjGKaVstoQnulr9fK632KsWd4DVrPjcs6IYz+AmI
-w6iMVWwfXM4HmtBZKmFZDB+QedvkKj3GoIGW7rbUWWWW5Nvk549SbrV4dFLmGjFe
-Vg2X59yxAoGBAPfOj/f7aJcltV6Guf4jmt0r9fB+wHAl9Vx1Dg0Etg10LJnjbgEI
-2jkvVr4qp71GUg0vTdbAwcX5ha1gjvvLEfH2ikSut7je1L26Lcm7tcyCGnlIIOU5
-gwyLwTFArdmK8yn2gC56I+MOdiqsw3xgvGeLaM39BTdAcDYtnJ2E0ysLAoGBAPBj
-/G30UVQ3bXcPuP2vZHNUSVBRr3Rsi4YO4Ue+pF4y1tcxaEDHYR+WuD03l/Vnu9mK
-xZxHLwQuVjAeogwrzNgbN3CMN9jytGfnwPPG8YOw0umpS7wk4ZBA6wh97R6H8hlI
-6rSZYt2i92rBKEDU0i5ciUnR0pjyy/IUhM9o/L7DAoGBAJqKWKCXSl/QpW5g6QdD
-3yWFb+hes9Z85aqWWX/m6z4ysEn8WrMMeUNmcVtBMMDKZQtR7+I47d9wQFyitijz
-OKrETPCOYYdKeDQmMr33cWYr0STHxbQOjNq7IW18366miAUodEIH6++DKlBs07Dy
-hyyv9VlZLPKLHi+7fEuD9UmHAoGBAL/2OCfdx+xGbsV66rC6FK78Cad383I3E5uz
-2jYeiMcoNeOV8rh3/pjpFKrd8Bzp/1oStQa82VCvZ+f5LlIlz+hqo3Teo+I8vc+T
-g8OnhEkzNNmedXoCwZUeIhGf7XBKAwwp7DLXodl3P7giEvDiggy/nGo0gcXdbPsd
-Y4j1P49dAoGAPlVSKQx+s7zfcUwJMG9AqOXvXUEg9+AJZBn/xqVVwbd0jb/yf1lB
-7Y+3Q3FndrVF/Gd7kTbgIlwI6sk7l0+CN1jjN1WEHgFenz6O4nlwIcdbQRovw/4S
-okAV3yLGjubMCjyKdBP8bpocBcstYdr2PEmrt37XFNhQVL3C8HjdPmU=
------END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/uci-defaults/60-owsd-ubusproxy

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# do not create ubusproxy section if it exists already
-[ "$(uci -q get owsd.ubusproxy)" == "ubusproxy" ] && exit 0
-
-uci set owsd.ubusproxy="ubusproxy"
-uci set owsd.ubusproxy.enable="1"
-uci set owsd.ubusproxy.peer_key="/etc/ubusx/ubusx_demo_only.key"
-uci set owsd.ubusproxy.peer_cert="/etc/ubusx/ubusx_demo_only.crt"
-uci set owsd.ubusproxy.peer_ca="/etc/ubusx/ubusxDemoCA.crt"
-uci commit owsd
-
-# do not create wan_https section if it exists already
-[ "$(uci -q get owsd.wan_https)" == "owsd-listen" ] && exit 0
-
-# do not create wan_https section if wan interface doesn't exist
-[ "$(uci -q get network.wan)" == "interface" ] || exit 0
-
-uci set owsd.wan_https="owsd-listen"
-uci set owsd.wan_https.port="443"
-uci set owsd.wan_https.interface="wan"
-uci set owsd.wan_https.key="/etc/ubusx/ubusx_demo_only.key"
-uci set owsd.wan_https.cert="/etc/ubusx/ubusx_demo_only.crt"
-uci set owsd.wan_https.ca="/etc/ubusx/ubusxDemoCA.crt"
-uci set owsd.wan_https.whitelist_interface_as_origin="1"
-uci del_list owsd.wan_https.origin="*"
-uci add_list owsd.wan_https.origin="*"
-uci commit owsd
-

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=4.1.1
+PKG_VERSION:=4.1.0
 
-PKG_SOURCE_VERSION:=a361300405fff58379d3d1568d5df46bcb752214
+PKG_SOURCE_VERSION:=3c7c4da8cdf14e4abb75a41e3ef9f2eddc9d75ae
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -44,7 +44,7 @@ export QUESTD_CFLAGS
 
 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +ubus +libpthread +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_ramips:libnl-tiny +libopenssl +easy-soc-libs
+	DEPENDS:=+libuci +libubox +ubus +libpthread +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_ramips:libnl-tiny +libopenssl
 	TITLE:=router info daemon
 endef
 

questd/files/etc/uci-defaults/996-questd-opreqs

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-add_required_ubusproxy_objects() {
-	uci -q del_list owsd.ubusproxy.object="wifix"
-	uci -q add_list owsd.ubusproxy.object="wifix"
-	uci commit owsd
-}
-
-add_required_ubusproxy_objects
-

uboot/Makefile

@@ -14,10 +14,10 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=819227ec4cf4f2f8f7e8d46a3bee58e329089de6
+PKG_SOURCE_VERSION:=c77089efc41ea3292125330221bd5016796631b9
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
-PKG_SOURCE_VERSION:=670ad7a30f3c6871b6c8a972e19ca2dd78ea8c9b
+PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -46,7 +46,7 @@ UBOOT_IMG:=uboot.img
 define uboot/ex400
   TITLE:=U-Boot for the ex400
   DEPENDS:=@TARGET_iopsys_ramips
-  PKG_RELEASE:=7
+  PKG_RELEASE:=6
 endef
 
 define uboot/sdx810_ap
@@ -74,7 +74,7 @@ define uboot/grx500_norrland
   TITLE:=U-Boot for Norrland Board
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=15
+  PKG_RELEASE:=14
 endef
 
 UBOOTS := \

uspd/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.1
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f033acb40afd9b087587d3cfba292e1d884600d6
+PKG_SOURCE_VERSION:=50a4346d518fd80d22cd9694ee3c1dba336bd072
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 
@@ -38,9 +38,7 @@ TARGET_CFLAGS += \
 
 define Package/uspd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
-	$(INSTALL_CONF) ./files/uspd.config $(1)/etc/config/uspd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
 endef

uspd/files/uspd.config

@@ -1,2 +0,0 @@
-config uspd 'usp'
-	option granularitylevel  '0'

uspd/files/uspd.init

@@ -17,9 +17,3 @@ reload_service() {
 	stop
 	start
 }
-
-service_triggers()
-{
-	procd_add_reload_trigger "cwmp"
-	procd_add_config_trigger "config.change" "uspd" /etc/init.d/uspd restart
-}

voice-client/Makefile

@@ -57,7 +57,6 @@ ifeq ($(CONFIG_TARGET_intel_mips),y)
 	-e 's/brcm/tapi/g' \
 	-e 's/BRCM/TAPI/g' \
 	-e 's/broadcom/intel/g' \
-	-e 's/SWE/ETS/g' \
 	$(1)/etc/config/voice_client \
 	$(1)/etc/asterisk_templates/*
 	sed -i \

voice-client/files/etc/init.d/voice_client

@@ -1,7 +1,8 @@
 #!/bin/sh /etc/rc.common
 #
-# The purpose of this file is to (re)create asterisk
-# configuration files from voice_client UCI config file.
+# This file is part of luci-app-voice,
+# its purpose is to (re)create asterisk configuration files
+# from luci config file(s).
 #
 . /lib/functions.sh
 . /lib/functions/network.sh
@@ -18,11 +19,8 @@ USE_PROCD=1
 # Some global variables
 SERIAL="$(getSerial)"
 BASEMAC="$(getBaseMAC)"
-BASEMAC="${BASEMAC//:}"
-LINENAME="$(getLineName)"
-CHANNELNAME="$(getChannelName)"
 MODULENAME=voice
-USERAGENT="iopsys_${SERIAL}_${BASEMAC}"
+USERAGENT="Inteno_${SERIAL}_${BASEMAC}"
 
 ASTUSER=nobody
 ASTGROUP=nogroup
@@ -34,6 +32,9 @@ ASTERISKDIR=/etc/asterisk
 WORKDIR=/tmp/$MODULENAME.$$
 MD5SUMSFILE=/tmp/$MODULENAME-sums.$$
 
+LINENAME="$(getLineName)"
+CHANNELNAME="$(getChannelName)"
+
 # Whitespace separated list of $CHANNELNAME feature access codes
 CHANNEL_FAC=
 
@@ -254,13 +255,16 @@ read_codecs_ptime()
 # returns a list of lines, formatted to replace a tag with sed
 # in a Dial() command
 #
+# For backwards compatibility, if i is only a number (not prefixed by
+#	"SIP/" or "CHANNEL/") then add "CHANNEL/"
+#
 read_lines()
 {
 	local line call_lines lineid ldx lines llength clength
 	local loffset=$(ubus -t 1 call voice.asterisk platform | jsonfilter -e @.lineoffset)
 	loffset=${loffset:-0}
 
-	config_get call_lines $1 call_lines
+	config_get call_lines $1 call_lines "0"
 
 	for line in $call_lines ; do
 
@@ -284,8 +288,8 @@ read_lines()
 
 		[ -n "$lineid" ] || continue
 
-		# -1 to match the line's uci config index number
-		# +loffset to match the correct number in channel driver
+		# -1 to get uci config index (which starts from 0)
+		# +loffset to give correct number of channel driver
 		ldx=$((lineid-1+loffset))
 
 		lines="$lines$CHANNELNAME/$ldx&"
@@ -1845,6 +1849,7 @@ configure_tel()
 #
 configure_tel_line()
 {
+	echo "Configuring $CHANNELNAME line $1"
 	local extension
 	local sip_provider
 	local codecs
@@ -2240,17 +2245,16 @@ stop_service() {
 
 reload_service() {
 	start
-	# turn off voice led; asterisk will turn it on if there is a registered account
+	#stop
+	# turn off voice led; asterisk will turn it on
+	# if there is a registered account
 	ubus call led.voice1 set '{"state":"off"}'
 
-	# FXS channel module must be reloaded before sip module. Otherwise some attributes like
-	# line's registration state which is updated by SIP module through callback might be
-	# reset.
-	asterisk -rx "$(getChipVendor) reload"
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
+	asterisk -rx "$(getChipVendor) reload"
 }
 
 service_triggers() {

voice-client/files/etc/uci-defaults/99-voice_client

@@ -5,7 +5,6 @@
 # Adapt to config section name changes
 grep -q brcm_line /etc/config/voice_client && sed -i 's/brcm_line/tel_line/g' /etc/config/voice_client
 grep -q brcm_advanced /etc/config/voice_client && sed -i 's/brcm_advanced/tel_advanced/g' /etc/config/voice_client
-grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM\///g' /etc/config/voice_client
 grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM/TEL/g' /etc/config/voice_client
 
 # Add call filter section

voice-client/files/lib/voice/broadcom.sh

@@ -43,32 +43,3 @@ getEchoCancellingValue() {
 	    ;;
     esac
 }
-
-supportedCountries() {
-	echo "Australia:AUS"
-	echo "Belgium:BEL"
-	echo "Brazil:BRA"
-	echo "Chile:CHL"
-	echo "China:CHN"
-	echo "Czech:CZE"
-	echo "Denmark:DNK"
-	echo "ETSI:ETS"
-	echo "Finland:FIN"
-	echo "France:FRA"
-	echo "Germany:DEU"
-	echo "Hungary:HUN"
-	echo "India:IND"
-	echo "Italy:ITA"
-	echo "Japan:JPN"
-	echo "Netherlands:NLD"
-	echo "New Zealand:NZL"
-	echo "North America:USA"
-	echo "Spain:ESP"
-	echo "Sweden:SWE"
-	echo "Switzerland:CHE"
-	echo "Norway:NOR"
-	echo "Taiwan:TWN"
-	echo "United Kingdoms:GRB"
-	echo "United Arab Emirates:ARE"
-	echo "CFG TR57:T57"
-}

voice-client/files/lib/voice/intel.sh

@@ -14,12 +14,12 @@ getLineName() {
 }
 
 getSerial() {
-    sernum="$(fw_printenv -n serial_number 2> /dev/null)"
+    sernum=$(fw_printenv -n serial_number) 2> /dev/null
 
     if [ $? ]; then
-	echo $sernum
-    else
 	echo 0
+    else
+	echo $sernum
     fi
 }
 
@@ -50,7 +50,3 @@ getEchoCancellingValue() {
 	    ;;
     esac
 }
-
-supportedCountries() {
-	echo "ETSI:ETS"
-}

voice-client/files/usr/libexec/rpcd/voice.asterisk

@@ -5,7 +5,7 @@
 
 case "$1" in
 	list)
-		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {}, "supported_countries" : {} }'
+		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {} }'
 
 	;;
 	call)
@@ -104,13 +104,11 @@ case "$1" in
 					from="$(echo $line | cut -d',' -f2)"
 					to="$(echo $line | cut -d',' -f3)"
 					callok=0
-					uci show voice_client | grep user | grep -wq "$from\|$to" && callok=1
+					uci show voice_client | grep user | grep -wq "$from" && callok=1
+					uci show voice_client | grep user | grep -wq "$to" && callok=1
 					[ $callok -eq 0 ] && continue
 					account="$(echo $line | cut -d',' -f4)"
-					actok=0
-					uci show voice_client  | grep sip_service_provider | grep -wq "$account" && actok=1
-					[ "$account" == "call_line" ] && actok=1
-					[ $actok -eq 0 ] && continue
+					uci show voice_client  | grep sip_service_provider | grep -wq "$account" || continue
 					timestart="$(echo $line | awk -F',' '{print $(NF-8)}')"
 					timend="$(echo $line | awk -F',' '{print $(NF-6)}')"
 					startdate=$(date -u -d "$timestart" +"%s")
@@ -148,22 +146,6 @@ case "$1" in
 				
 				json_dump
 			;;
-			supported_countries)
-				vcf="/tmp/voice.supported_countries"
-				supportedCountries > $vcf
-                                json_init
-                                json_add_array countries
-				while IFS= read -r line
-				do
-					json_add_object ""
-					json_add_string country "$(echo $line | cut -d':' -f1)"
-					json_add_string code "$(echo $line | cut -d':' -f2)"
-					json_select ..
-				done < "$vcf"
-
-				json_dump
-				rm -f $vcf
-			;;
 		esac
 	;;
 esac

voice-client/files/usr/sbin/ringing

@@ -49,11 +49,6 @@ set_ringing_schedule() {
 	stop_hour=$(echo $stop | awk -F ':' '{print$1}')
 	stop_min=$(echo $stop | awk -F ':' '{print$2}')
 
-	[ "${start_min//[0-9]/}" = "" ] || return
-	[ "${start_hour//[0-9]/}" = "" ] || return
-	[ "${stop_min//[0-9]/}" = "" ] || return
-	[ "${stop_hour//[0-9]/}" = "" ] || return
-
 	daymatch=0
 	for day in $days; do
 		[ "${day:0:3}" == "$current_day" ] && daymatch=1

wifilife/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifilife
-PKG_VERSION:=2.0.0
+PKG_VERSION:=1.0.3
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=edb14e500d72b311175e477fe7ea1e8a2f29d89f
+PKG_SOURCE_VERSION:=c5a0776ec6798175bb7a03d68006c9bab4971a7f
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)

wifilife/files/etc/uci-defaults/999-wifilife-opreqs

@@ -3,13 +3,11 @@
 . /lib/functions.sh
 
 add_owsd_object_wifi() {
-	uci -q del_list owsd.ubusproxy.object="router.system"
-	uci -q del_list owsd.ubusproxy.object="wifix"
-	uci -q del_list owsd.ubusproxy.object="wifi.*"
-	uci -q add_list owsd.ubusproxy.object="router.system"
-	uci -q add_list owsd.ubusproxy.object="wifix"
-	uci -q add_list owsd.ubusproxy.object="wifi.*"
-	uci commit owsd
+	local wifi=$(uci -q get owsd.ubusproxy.object | grep wifi*)
+	if [ -z "$wifi" ]; then
+		uci -q add_list owsd.ubusproxy.object="wifi*"
+		uci commit owsd
+	fi
 }
 
 add_dnsmasq_lease_hwmask() {

wifimngr/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifimngr
-PKG_VERSION:=2.0.0
+PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c92faa666a476d904a1cd495aede1616450a8939
+PKG_SOURCE_VERSION:=5ab0a61b2d8dc34be0e0053670a13876e648f94b
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>