Merge remote-tracking branch 'origin/release-4.2'

-------------------------------------------------------------------------------
* c7228ea fix array size bounds for max interfaces
-------------------------------------------------------------------------------
commit c7228ea031f407580ff8e4801e0ba544aeadd050
Author: Anjan Chanda <anjan.chanda@iopsys.eu>
Date: 2019-04-08 13:40:40 +0200

    fix array size bounds for max interfaces

Base directory -> /
 wifimngr.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
-------------------------------------------------------------------------------

catv/files/etc/config/catv

@@ -1,4 +1,4 @@
 
 config service 'catv'
-        option enable 'no'
+        option enable '0'
         option filter '3'

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.3.0
+PKG_VERSION:=1.2.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a5c94b289c79bc3a635b8d742dd9b73dcc0615f
+PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
 PKG_NAME:=dectmngr2
 
 

dslmngr/Makefile

@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.0.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +easy-soc-libs
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -1,37 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utitie
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A OUTPUT ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,10 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-	uci del_list firewall.easyqos._access_w="root"
-	uci add_list firewall.easyqos._access_w="root"
-        commit firewall
-EOT

easy-soc-libs/Config.in

@@ -15,9 +15,5 @@ config LIBDSL_DEBUG
 	bool "Enable xdsl debugging"
 	default n
 
-config LIBDSL_TEST
-	depends on PACKAGE_libdsl
-	bool "Libdsl test program"
-	default n
 endmenu
 endif

easy-soc-libs/Makefile

@@ -5,18 +5,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c656cd47a9f911cfe3946e3d4a374b4ae9e5d801
+PKG_SOURCE_VERSION:=6a311af7cd17fc410c27de3cfae33b658195fd0b
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-endif
 
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -37,24 +34,26 @@ endef
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+TARGET_intel_mips:libnl +TARGET_intel_mips:libnl-route
+endef
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
 endef
 
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+TARGET_iopsys_ramips:swconfig
+  DEPENDS:=+TARGET_iopsys_ramips:swconfig
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
   KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
   TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
@@ -65,21 +64,13 @@ else ifeq ($(CONFIG_TARGET_intel_mips),y)
   TARGET_PLATFORM=INTEL
   TARGET_CFLAGS +=-DIOPSYS_INTEL
 else
-  $(info Unexpected CONFIG_TARGET)
+  $(info (UNEXPECTED CONFIG TARGET))
 endif
 
-export TARGET_PLATFORM
-
 ifdef CONFIG_IOP_LLA_LIBS_DEBUG
   TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
 endif
 
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi
-endef
-
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
@@ -87,22 +78,15 @@ subdirs := \
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	CFLAGS="$(TARGET_CFLAGS)" \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
 	subdirs="$(subdirs)"
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
@@ -124,12 +108,6 @@ define Build/InstallDev/libethernet
 	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
 endef
 
-define Build/Compile
-	$(call Build/Compile/Default)
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endif
-endef
 
 define Build/InstallDev
 	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
@@ -147,11 +125,7 @@ endef
 
 define Package/libdsl/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
 	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
 endef
 
 $(eval $(call BuildPackage,libwifi))

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=631e61b7ab5d86f2f4c86756a117badff9fb0f2c
+PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

gryphon-led-module/Makefile

@@ -1,62 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  PKG_LICENSE:=Genexis
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,253 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	/* [ln] todo: dummy implementation */
-	int len;
-
-	len = sprintf(buf, "%d\n", 123);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		leds->clock_gpio = NULL;
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		leds->data_gpio = NULL;
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 1  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}

gryphon-led-module/src/sk9822_bitbang.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-05-21
+PKG_VERSION:=4.0-2019-04-25
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3ae6954f55e90a339561719a0328c0cf3a4b018c
+PKG_SOURCE_VERSION:=cd777bbd2dbe7477ec7665f12d3d20e6b2e9e052
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -51,20 +51,6 @@ define Package/icwmp_xmpp
 	DEPENDS:=+libuci +libubox +libexpat +libstrophe
 endef
 
-define Package/icwmp_twamp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 twamp feature
-	DEPENDS:=+libuci
-endef
-
-define Package/icwmp_udpechoserver
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 udpechoserver feature
-	DEPENDS:=+libuci
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
@@ -217,24 +203,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
 endef
 
-define Package/icwmp_udpechoserver/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
-endef
-
-define Package/icwmp_twamp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
-endef
-
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
@@ -270,6 +238,4 @@ $(eval $(call BuildPackage,icwmp-curl))
 $(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp_stun))
 $(eval $(call BuildPackage,icwmp_xmpp))
-$(eval $(call BuildPackage,icwmp_udpechoserver))
-$(eval $(call BuildPackage,icwmp_twamp))
 $(eval $(call BuildPackage,icwmp-zstream))

imonitor/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -15,6 +15,7 @@ PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
 PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 
@@ -23,7 +24,7 @@ include $(INCLUDE_DIR)/cmake.mk
 
 define Package/imonitor
 	CATEGORY:=Utilities
-	TITLE:=iopsysWrt process supervisor
+	TITLE:=Inteno process supervisor
 	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
 endef
 

inbd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2016 iopsys
+# Copyright (C) 2016 Inteno
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
+PKG_SOURCE_VERSION:=12755fccb8ef87965ac684d62d56e19e73a255bd
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/inbd
 	CATEGORY:=Utilities
-	TITLE:=iopsys Netlink Bridge Daemon
+	TITLE:=Inteno Netlink Bridge Daemon
 	URL:=
 	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
 endef

iop/Makefile

@@ -20,7 +20,7 @@ define Package/iop
 endef
 
 define Package/iop/description
-	This package contains iopsysWrt SDK utilities
+	This package contains Intenos Iop utilities
 endef
 
 define Build/Compile

iop/config

@@ -3,9 +3,11 @@ CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_LOCALMIRROR is not set
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_6tunnel=y
 CONFIG_PACKAGE_alsa-lib=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
@@ -15,35 +17,57 @@ CONFIG_PACKAGE_crashlog=y
 CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
 CONFIG_PACKAGE_gdb=m
+CONFIG_PACKAGE_gdbserver=m
 CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_glib2=y
+CONFIG_PACKAGE_ice-client=y
+CONFIG_PACKAGE_ice-client-camerawatch=m
+CONFIG_PACKAGE_ice-client-fileme=m
+CONFIG_PACKAGE_ice-client-gigaset=m
+CONFIG_PACKAGE_ice-client-guest=m
+CONFIG_PACKAGE_ice-client-iperf=m
+CONFIG_PACKAGE_ice-client-logreader=m
+CONFIG_PACKAGE_ice-client-monitor=m
+CONFIG_PACKAGE_ice-client-netrounds=m
+CONFIG_PACKAGE_ice-client-rshell=m
+CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
 CONFIG_PACKAGE_ifbt=y
 CONFIG_PACKAGE_imonitor=y
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_iopupgrade=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_iperf-mt=y
 CONFIG_PACKAGE_ipset=y
 CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
+CONFIG_PACKAGE_iup=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-broadcom-iptv=y
+CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
+CONFIG_PACKAGE_juci-wifilife=y
+CONFIG_PACKAGE_juci-wireless=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
 CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
 CONFIG_PACKAGE_juci-dropbear=y
 CONFIG_PACKAGE_juci-event=y
 CONFIG_PACKAGE_juci-firewall-fw3=y
+CONFIG_PACKAGE_juci-ice-client=y
 CONFIG_PACKAGE_juci-icwmp=y
 CONFIG_PACKAGE_juci-igmpinfo=y
+CONFIG_PACKAGE_juci-config-backup=y
+CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-iup=y
+# CONFIG_PACKAGE_juci-qos is not set
+CONFIG_PACKAGE_juci-voice-client=y
+CONFIG_PACKAGE_juci-macdb=y
 CONFIG_PACKAGE_juci-minidlna=y
 CONFIG_PACKAGE_juci-mod-status=y
 CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-mwan3=y
+CONFIG_PACKAGE_juci-natalie-dect=y
 CONFIG_PACKAGE_juci-netmode=y
 CONFIG_PACKAGE_juci-network-device=y
 CONFIG_PACKAGE_juci-network-dsl=y
@@ -51,20 +75,24 @@ CONFIG_PACKAGE_juci-network-netifd=y
 CONFIG_PACKAGE_juci-network-port=y
 CONFIG_PACKAGE_juci-openvpn=y
 CONFIG_PACKAGE_juci-owsd=y
+CONFIG_PACKAGE_juci-printer=y
 CONFIG_PACKAGE_juci-realtime-graphs=y
 CONFIG_PACKAGE_juci-samba=y
+CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
+CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-utils=y
+# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
+CONFIG_PACKAGE_kmod-nls-base=y
 CONFIG_PACKAGE_kmod-siit=y
 CONFIG_PACKAGE_libcgroup-daemon=y
 CONFIG_PACKAGE_libcgroup=y
 # CONFIG_PACKAGE_libcgroup-utils is not set
+CONFIG_PACKAGE_ldd=y
 CONFIG_PACKAGE_libdaemon=y
 CONFIG_PACKAGE_libffmpeg-mini=y
 CONFIG_PACKAGE_libgmp=y
@@ -72,10 +100,14 @@ CONFIG_PACKAGE_libreadline=y
 CONFIG_PACKAGE_loop-detector=m
 CONFIG_PACKAGE_minidlna=y
 CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mtd-utils=y
+CONFIG_PACKAGE_mtd-utils-deubinize=y
+CONFIG_PACKAGE_mtd-utils-imagewrite=y
+CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
+CONFIG_PACKAGE_mtd-utils-nanddump=y
 CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
 CONFIG_PACKAGE_odhcp6c=y
@@ -84,6 +116,7 @@ CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
+# CONFIG_PACKAGE_p910nd is not set
 CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_power-management=y
@@ -154,6 +187,7 @@ CONFIG_BUSYBOX_CONFIG_MICROCOM=y
 # CONFIG_BUSYBOX_CONFIG_RMMOD is not set
 CONFIG_BUSYBOX_CONFIG_STTY=y
 CONFIG_BUSYBOX_CONFIG_TFTP=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
@@ -167,9 +201,11 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
+# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
@@ -179,6 +215,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
 # CONFIG_BUSYBOX_CONFIG_PAM is not set
 # CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
 # CONFIG_BUSYBOX_CONFIG_NTPD is not set
+# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
 CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
@@ -187,6 +224,7 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
+CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
+CONFIG_PACKAGE_iopupgrade=y
 

iop/scripts/feeds_update.sh

@@ -32,15 +32,13 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-mips iopsys-brcm63xx-arm iopsys-ramips intel_mips"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -p targets iopsys-ramips
+    ./scripts/feeds install -p intel_targets intel_mips
 
     # install all packages
-    ./scripts/feeds install -a
+    ./scripts/feeds install -a 
 
     # remove broken symlinks ( for packages that are no longer in the feed )
     find -L package/feeds -maxdepth 2 -type l -delete
@@ -49,7 +47,7 @@ function feeds_update {
     make defconfig
 
     # record when we last run this script
-    touch tmp/.iop_bootstrap
+    touch tmp/.iop_bootstrap 
 
     # always return true
     exit 0

iop/scripts/genconfig.sh

@@ -12,99 +12,39 @@ function genconfig {
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
+	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+
 	target="bogus"
 	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
-
-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
-
-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
-
-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
-
-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
-
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
+	    local iopsys_brcm63xx_mips=$(cd target/linux/iopsys-brcm63xx-mips; ./genconfig)
+	    local iopsys_brcm63xx_arm=$(cd target/linux/iopsys-brcm63xx-arm; ./genconfig)
+	    local iopsys_ramips=$(cd target/linux/iopsys-ramips; ./genconfig)
+	    local intel_mips=$(cd target/linux/intel_mips; ./genconfig)
 
-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
+	    if [ "$profile" == "LIST" ]
+	    then
+		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
+		do
+		    echo "$list based boards:"
+		    for b in ${!list}
+		    do
+			echo -e "\t$b"
+		    done
+		done
+		return
 	    fi
 
+	    local targets
+
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
+			config_path="target/linux/iopsys-brcm63xx-mips/config"
 		    return
 		fi
 	    done
@@ -112,7 +52,7 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
+			config_path="target/linux/iopsys-brcm63xx-arm/config"
 		    return
 		fi
 	    done
@@ -120,15 +60,15 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="$ramips/config"
+			config_path="target/linux/iopsys-ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $iopsys_intel_mips; do
+	    for p in $intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			config_path="$intel_mips/config"
+			config_path="target/linux/intel_mips/config"
 		    return
 		fi
 	    done
@@ -145,12 +85,17 @@ function genconfig {
 		mediatekAllowed=0
 		wifilifeAllowed=0
 
-		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
-		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
-		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
-		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
-		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
+		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
+		for repo in $allowedRepos; do
+			case $repo in
+			bcmkernel) bcmAllowed=1 ;;
+			ice-client) iceAllowed=1 ;;
+			endptcfg) endptAllowed=1 ;;
+			natalie-dect*) natalieAllowed=1 ;;
+			linux) mediatekAllowed=1 ;;
+			wifilife) wifilifeAllowed=1 ;;
+			esac
+		done
 	}
 
 	v() {
@@ -161,18 +106,17 @@ function genconfig {
 		echo
 		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
 		echo
-		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\t\tVerbose"
+		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
+		echo -e "  -v|--verbose\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
+		echo -e "  -s|--override\tEnable 'Package source tree override'"
+		echo -e "  -h|--help\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
+		echo -e "  -a|--list-all\tList all Customers and their board types"
+		echo -e "  -b|--boards\tList all board types"
 		echo
-		echo "Example ./iop genconfig dg200 TELIA"
-		echo "(if no customerconfig is chosen, iopsys config will be used)"
+		echo "Example ./iop genconfig vg50 TELIA"
+		echo "(if no customerconfig is chosen the Inteno Config will be used)"
 		echo
 		exit 0
 	}
@@ -232,7 +176,7 @@ function genconfig {
 
 	setup_dirs()
 	{
-		if git ls-remote $CUSTREPO -q 2>/dev/null; then
+		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
 			if [ ! -d "$CUSTPATH" ]; then
 				git clone "$CUSTREPO" "$CUSTPATH"
 			elif [ $IMPORT -eq 1 ]; then
@@ -362,7 +306,7 @@ function genconfig {
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
 			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
-			echo "# CONFIG_GITMIRROR_REWRITE is not set" >>.config
+			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
 			echo "CONFIG_ICE_OPEN=y" >> .config
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
@@ -371,11 +315,6 @@ function genconfig {
 			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
 		# Force regeneration of themes
 		touch package/feeds/juci/juci/Makefile
 
@@ -388,9 +327,6 @@ function genconfig {
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
 
-		# Store generated config
-		cp .config .genconfig.config
-
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
@@ -398,8 +334,6 @@ function genconfig {
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
 	}
 
 	####### main #####
@@ -424,7 +358,6 @@ function genconfig {
 			-p|--profile) export PROFILE="$2"; shift;;
 			-r|--repo) export CUSTREPO="$2"; shift;;
 			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;
@@ -439,7 +372,7 @@ function genconfig {
 			shift;
 		done
 
-		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
+		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
 		create_and_copy_files "$@"

iop/scripts/install_key.sh

@@ -10,7 +10,7 @@ function install_key {
     echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
     echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
     echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "console::askfirst:/bin/cttyhack /bin/ash --login" >>files/etc/inittab
+    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
 
     echo Done
 }

iop/scripts/update_feed_branches.sh

@@ -46,7 +46,7 @@ function update_feed_branches {
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release
-		git push --set-upstream origin $release
+		git push origin $release
 		cd $ipath
 	done
 

iopupgrade/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=iopupgrade
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=01f2afd6c831d6f9eb2940c7e7af16f7e4d439c2
+PKG_SOURCE_VERSION:=9b5ed4bc9f7ac5064414cf5feb510ffd95df6ec4
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
 

iopupgrade/files/sbin/iopu

@@ -7,7 +7,6 @@ cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
 		# eg: rootfs_0 or rootfs_1, the one we want to update
 cmdline=""	# command line settings.
-cmdline_match="" # Headers to match to the image
 
 ###############################################################################
 # file local variables. should not be used in imported functions. Can be used
@@ -21,6 +20,7 @@ upd_ubi_id=""		# num,	UBI volume number for the volume name
 run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
 run_mount_cleanup=0	# set if we should run umount in cleanup
 upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
+upd_cfe=0		# set to 1 if system is using cfe as bootloader.
 log_stdout=1		# set to 0 to prevent the log to also print to stdout
 upd_noreboot=0		# set to 1 if we should not reboot after programming
 upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
@@ -204,7 +204,9 @@ log "Firmware upgrade started"
 if [ $upd_forceimage -eq 0 ]
 then
    board=$(db get hw.board.iopVerBoard)
-   cmdline_match="board=$board"
+   cmdline="$cmdline -b $board"
+else
+    cmdline="$cmdline -q"
 fi
 
 # find out what rootfs volume is active. 
@@ -215,19 +217,16 @@ upd_vol=$(get_flashbank_next)
 upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
 log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
 
-# prepare to match dsl.
-function_call upd_conf_dsl
-
 # prepare to update CFE if it exists
 function_call upd_conf_cfe
 
 # prepare to update kernel if it is stored in MTD/JFFS2 
 function_call upd_conf_kernel
 
-log "now starting writing data to flash with [ iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id ]"
+log "now starting writing data to flash with [ iopupgrade $cmdline -u ubi0_$upd_ubi_id ]"
 run_cleanup=1	# When we start to actually write data there might be some
 		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -M "$cmdline_match" -u ubi0_$upd_ubi_id
+iopupgrade $cmdline -u ubi0_$upd_ubi_id
 
 # in case of any error we abort
 if [ $? -ne 0 ]; then

ltq-nand/Makefile

@@ -1,33 +0,0 @@
-#
-# Copyright (C) 2008-2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ltq-nand
-PKG_VERSION:=1.0
-
-PKG_SOURCE:=v$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/archive/
-#PKG_SOURCE_PROTO:=git
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand/releases/download/v$(PKG_VERSION)/
-#PKG_SOURCE_URL:=https://github.com/merbanan/ltq-nand.git
-#PKG_SOURCE_VERSION:=07b5b0331af6de4174dab2c02bf260ee9625452a
-
-include $(INCLUDE_DIR)/host-build.mk
-
-
-define Host/Compile
-	$(MAKE) -C $(HOST_BUILD_DIR)
-endef
-
-define Host/Install
-	$(CP) \
-		$(HOST_BUILD_DIR)/ltq-nand \
-		$(STAGING_DIR_HOST)/bin/
-endef
-
-$(eval $(call HostBuild))
-

ndt/Makefile

@@ -1,33 +0,0 @@
-#
-# This is free software, See /COPYRIGHT for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ndt
-PKG_VERSION:=3.6.4
-PKG_RELEASE:=3
-
-PKG_BUILD_DIR:=${BUILD_DIR}/ndt-$(PKG_VERSION)
-PKG_SOURCE:=ndt-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://software.internet2.edu/sources/ndt
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ndt
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +zlib
-	TITLE:=Network Testing Tool
-endef
-
-define Build/Compile/Default
-	$(MAKE) -C $(PKG_BUILD_DIR)
-endef
-
-define Package/ndt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/web100clt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ndt))
-

netmode/files/etc/config/netmode

@@ -4,6 +4,6 @@ config mode 'setup'
         option curmode 'routed'
 
 config tools 'tools'
-	option wificontrol 0
+	option wificontrol 1
 	option arp_discovery 1
 

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -2,9 +2,6 @@
 
 [ "$INTERFACE" != "wan" ] && exit
 
-automode="$(uci -q get netmode.setup.automode)"
-[ "$automode" == "0" ] && exit
-
 . /lib/functions.sh
 . /lib/functions/network.sh
 . /lib/functions/netmode.sh

netmode/files/etc/netmodes/bridged/DETAILS

@@ -12,8 +12,7 @@
 		"CG300",
 		"CG301",
 		"EX400",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"acl" : [
 		"admin",

netmode/files/etc/netmodes/bridged/wireless

@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"uplink_band" : 'a',
 	"downlink_band" : 'a b',

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -27,7 +27,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps	1
+	option wps_pbc	1
 
 config wifi-device  rai0
 	option band a
@@ -46,7 +46,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps	1
+	option wps_pbc	1
 
 config wifi-iface
 	option device   rai0

netmode/files/etc/netmodes/routed_brcm/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"EX4*",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"credentials" : 0
 }

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -47,10 +47,10 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl0'
 
 config wifi-device 'wl1'
@@ -87,9 +87,9 @@ config wifi-iface
 	option cipher 'auto'
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
-	option macfilter 'disable'
-	option wps '1'
+	option macfilter '0'
+	option wps_pbc '1'
 	option wmf_bss_enable '1'
-	option maxassoc '32'
+	option bss_max '32'
 	option ifname 'wl1'
 

netmode/files/etc/netmodes/routed_mtk/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"reboot" : 0,
 	"credentials" : 0

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -27,7 +27,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pbc	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -47,6 +47,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pbc	1
 	option ifname	rai0
 

netmode/files/lib/functions/netmode.sh

@@ -5,7 +5,6 @@
 
 NMTMPDIR=/var/netmodes
 OLD_MODE_FILE=/var/netmodes/old_mode
-CONF_BACKUP_DIR=/var/netmodes/backup/
 SWITCHMODELOCK="/tmp/switching_mode"
 MODEDIR=$(uci -q get netmode.setup.dir)
 MTK=0
@@ -180,11 +179,6 @@ switch_netmode() {
 
 	run_netmode_scripts $curmode "pre"
 
-	# make backup of current config before switching
-	rm -rf $CONF_BACKUP_DIR
-	mkdir -p $CONF_BACKUP_DIR
-	cp -af /etc/config/* $CONF_BACKUP_DIR
-
 	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
 
 	for file in $(ls /etc/netmodes/$curmode/); do
@@ -232,28 +226,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "post"
 }
 
-revert_netmode() {
-	local from="$1"
-	local to="$2"
-	local rready="$3"
-
-	ubus call leds set  '{"state" : "allflash"}'
-	echo "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
-	uci -q set netmode.setup.curmode="$to"
-	uci -q set netmode.setup.repeaterready="$rready"
-	uci commit netmode
-	cp -af $CONF_BACKUP_DIR/* /etc/config/
-	sync
-	rm -rf $CONF_BACKUP_DIR
-	rm -rf $OLD_MODE_FILE
-
-	echo "Restarting network services" > /dev/console
-	ubus call network reload
-	wifi reload
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-}
-
 wificontrol_takes_over() {
 	local ret
 	[ -f /sbin/wificontrol ] || return

netmode/files/usr/libexec/rpcd/repeater

@@ -3,10 +3,6 @@
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
 
-WIFISTA=0
-STACONF="/etc/Wireless/iNIC/iNIC_ap.dat"
-[ -f $STACONF ] && WIFISTA=1
-
 get_if_creds() {
 	local section=$1
 	local network=$2
@@ -88,22 +84,9 @@ duplicate_if_single_radio() {
 	done
 }
 
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
 case "$1" in
 	list)
-		if [ $WIFISTA -eq 1 ]; then
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {} }'
-		else
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
-		fi
+		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
 	;;
 	call)
 		case "$2" in
@@ -153,64 +136,6 @@ case "$1" in
 				json_dump
 
 			;;
-			connect)
-				local ssid key enc auth wetif wetcfg wetssid wetkey code
-				read input
-				json_load "$input"
-				json_get_var ssid ssid
-				json_get_var key key
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					wetssid="$(uci -q get $wetcfg.ssid)"
-					wetkey="$(uci -q get $wetcfg.key)"
-					ssid="${ssid:-$wetssid}"
-					key="${key:-$wetkey}"
-					if [ -n "$key" ]; then
-						auth="WPA2PSK"
-						enc="AES"
-					else
-						auth="OPEN"
-						enc="NONE"
-					fi
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set ApCliSsid="$ssid"
-					iwpriv $wetif set ApCliAuthMode="$auth"
-					iwpriv $wetif set ApCliEncrypType="$enc"
-					iwpriv $wetif set ApCliWPAPSK="$key"
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set ApCliAutoConnect=1
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
-			forget_network)
-				local wetif wetcfg code
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					uci -q set $wetcfg.ssid=""
-					uci -q set $wetcfg.key=""
-					uci -q commit wireless
-
-					sed -i "s/ApCliSsid=.*/ApCliSsid=/g" $STACONF
-					sed -i "s/ApCliAuthMode=.*/ApCliAuthMode=/g" $STACONF
-					sed -i "s/ApCliEncrypType=.*/ApCliEncrypType=/g" $STACONF
-					sed -i "s/ApCliWPAPSK=.*/ApCliWPAPSK=/g" $STACONF
-
-					ifconfig $wetif down
-					ifconfig $wetif up
-
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
 		esac
 	;;
 esac

owsd/Config.in

@@ -1,9 +1,9 @@
 choice
-	prompt "Select IPC Bus"
+	prompt "Select Bus"
 	default OWSD_USE_UBUS
 	depends on PACKAGE_owsd
 	help
-		Select which IPC bus to compile owsd for
+		Select which bus to compile owsd for
 
 config OWSD_USE_DBUS
 	bool "Use DBUS"
@@ -15,11 +15,3 @@ config OWSD_USE_DBUS_UBUS
 	bool "Use UBUS and DBUS"
 
 endchoice
-
-config OWSD_UPROXYD
-	bool "Enable UBUS Proxy Daemon"
-	default y if OWSD_USE_UBUS || OWSD_USE_DBUS_UBUS
-        help
-          Enabling uproxyd automates detection of other
-	  UBUS-X enabled devices in the network
-

owsd/Makefile

@@ -1,31 +1,30 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.1.1
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=da5bcdbaa96d01e878d921c90c34a04bbdfca973
+PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
-PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS CONFIG_OWSD_UPROXYD
+PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS
 
 USE_UBUS-y:=-DWSD_HAVE_UBUS=ON
 USE_DBUS-y:=-DWSD_HAVE_DBUS=ON
 USE_BOTH-y:=${USE_UBUS-y} ${USE_DBUS-y}
-USE_UPROXYD-y:=-DOWSD_UPROXYD=ON
 
 CMAKE_OPTIONS:=${USE_UBUS-${CONFIG_OWSD_USE_UBUS}} \
 	${USE_DBUS-${CONFIG_OWSD_USE_DBUS}} \
-	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}} \
-	${USE_UPROXYD-${CONFIG_OWSD_UPROXYD}}
+	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}}
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
@@ -53,14 +52,14 @@ endef
 define Package/owsd/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/owsd $(1)/usr/bin/owsd
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/uproxyd
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/owsd.init $(1)/etc/init.d/owsd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) ./files/owsd.config $(1)/etc/config/owsd
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_BIN) ./files/owsd.hotplug $(1)/etc/hotplug.d/iface/55-owsd
+#	$(INSTALL_DIR) $(1)/etc/uci-defaults
+#	$(INSTALL_BIN) ./files/owsd.uci_default $(1)/etc/uci-defaults/55-owsd-interfaces
 endef
 
 define Package/owsd-testdata

owsd/files/owsd.init

@@ -126,8 +126,8 @@ validate_owsd_global() {
 
 }
 
-append_str() {
-	json_add_string "" "$1"
+append_origin() {
+	procd_append_param command -o"$1"
 }
 
 append_origin_parts() {
@@ -137,9 +137,9 @@ append_origin_parts() {
 	port="$3"
 
 	if [ "${proto}" = "https" -a "${port}" -eq 443 -o "${proto}" = "http" -a "${port}" -eq 80 ]; then
-		append_str "${proto}://${host}"
+		append_origin "${proto}://${host}"
 	else
-		append_str "${proto}://${host}:${port}"
+		append_origin "${proto}://${host}:${port}"
 	fi
 }
 
@@ -150,7 +150,6 @@ validate_owsd_iface() {
 		'origin:list(string)' \
 		'whitelist_interface_as_origin:bool:0' \
 		'whitelist_dhcp_domains:bool:0' \
-		'whitelist_all_origins:bool:0' \
 		'ipv6:bool:1' \
 		'ipv6only:bool:0' \
 		'linklocal:bool:0' \
@@ -164,7 +163,7 @@ validate_owsd_iface() {
 }
 
 parse_owsd_iface() {
-	local port interface whitelist_interface_as_origin whitelist_dhcp_domains whitelist_all_origins ipv6 ipv6only linklocal
+	local port interface whitelist_interface_as_origin whitelist_dhcp_domains ipv6 ipv6only linklocal
 	local cert key ca
 	local restrict_to_user
 	local ubusx_acl
@@ -176,46 +175,32 @@ parse_owsd_iface() {
 
 	# utility function
 	new_listen_socket() {
-		json_add_int "port" ${port}
+		procd_append_param command -p "${port}"
 
-		[ -n "${cert}"      ] && json_add_string "cert" "${cert}"
-		[ -n "${key}"       ] && json_add_string "key" "${key}"
-		[ -n "${ca}"        ] && json_add_string "ca" "${ca}"
+		procd_append_param command -L"$1"
 
-		[ -n "${restrict_to_user}" ] && {
-			json_add_array "restrict_to_user"
-			config_list_foreach "$1" "restrict_to_user" append_str
-			json_close_array
-		}
-		[ -n "$2" ] && json_add_string "interface" "$2"
+		[ -n "${cert}"      ] && procd_append_param command -c"${cert}"
+		[ -n "${key}"       ] && procd_append_param command -k"${key}"
+		[ -n "${ca}"        ] && procd_append_param command -a"${ca}"
 
-		[ -n "${ubusx_acl}" ] && json_add_string "ubusx_acl" "$ubusx_acl"
+		[ -n "${restrict_to_user}" ] && procd_append_param command -u"${restrict_to_user}"
+
+		[ -n "$2" ] && procd_append_param command -i"$2"
+
+		[ -n "${ubusx_acl}" ] && procd_append_param command -X"${ubusx_acl}"
 
 	}
 
-	origin_whitelist_all() {
-		[ "$1" = "*" ] && echo "true"
-	}
-
-	append_whitelists() {
-		config_list_foreach "$1" "origin" append_str
-
-		[ -n "$2" ] && whitelist_all_origins=1
-
-		if [ "$whitelist_all_origins" -eq 1 ]; then
-			whitelist_dhcp_domains=1
-			whitelist_interface_as_origin=1
-		fi
+	append_whitelists () {
+		config_list_foreach "$1" "origin" append_origin
 
 		if [ "$whitelist_dhcp_domains" -eq 1 ]; then
-			echo $1 domains = $DHCP_DOMAINS > /dev/console
 			for domain in $DHCP_DOMAINS; do
 				append_origin_parts "${http}" "${domain}" "${port}"
 			done
 		fi
 
 		if [ -n "${interface}" -a -n "${addr}" -a "${whitelist_interface_as_origin}" -eq 1 ]; then
-			echo $1 whitelisting interface $http $addr $port > /dev/console
 			append_origin_parts "${http}" "${addr}" "${port}"
 		fi
 	}
@@ -227,22 +212,13 @@ parse_owsd_iface() {
 	if [ -n "${interface}" ]; then
 		# 1 listen-socket (vhost) for each IP address on that network's iface
 
-		whitelist=$(config_list_foreach "$1" "origin" origin_whitelist_all)
-
 		# ipv4 addresses
 		if [ "${ipv6only}" -eq 0 ]; then
 			network_get_ipaddrs ip4addrs "${interface}";
 		fi
-
-		json_add_array "$1"
 		for addr in ${ip4addrs}; do
-			json_add_object "${1}"
 			new_listen_socket "$1" "${addr}"
-			[ -n "$whitelist" -o "$whitelist_all_origins" -eq 1 ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_close_object
+			append_whitelists "$1"
 		done
 
 		# ipv6 addresses
@@ -254,24 +230,16 @@ parse_owsd_iface() {
 				ip6addrs="${ip6addrs} ${linklocaladdrs}"
 			fi
 		fi
-
 		for addr in ${ip6addrs}; do
-			json_add_object "${1}6"
 			new_listen_socket "$1" "${addr}"
 			addr="\\[${addr}]"
-			[ -n "$whitelist" ] && json_add_boolean "origin_check" false
-			json_add_array "origin"
-			append_whitelists "$1" "$whitelist"
-			json_close_array
-			json_add_boolean "ipv6" 1
-			json_close_object
+			append_whitelists "$1"
+			procd_append_param command -66
 		done
-		json_close_array
-
 	else
 		new_listen_socket "$1"
-		if [ "${ipv6}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
-		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then json_add_boolean "ipv6only" 1; fi
+		if [ "${ipv6}" -eq 1 ]; then procd_append_param command -6; fi
+		if [ "${ipv6}" -eq 1 -a "${ipv6only}" -eq 1 ]; then procd_append_param command -6; fi
 
 		append_whitelists "$1"
 	fi
@@ -295,15 +263,11 @@ start_service() {
 		echo "Global validation failed"
 		return 1
 	}
-	json_init
-	json_add_object "global"
-	[ -n "${sock}"       ] && json_add_string "socket" "$sock"
-	[ -n "${www}"        ] && json_add_string "www" "$www"
-	[ -n "${redirect}"   ] && json_add_string "redirect" "$redirect"
-	[ -n "${www_maxage}" ] && json_add_int "www_maxage" "$www_maxage"
-	json_close_object
 
-	procd_append_param command -f "/tmp/owsd/owsd_cfg.json"
+	[ -n "${sock}"      ] && procd_append_param command -s"${sock}"
+	[ -n "${www}"       ] && procd_append_param command -w"${www}"
+	[ -n "${redirect}"  ] && procd_append_param command -r"${redirect}"
+	[ -n "${www_maxage}" ] && procd_append_param command -t"${www_maxage}"
 
 	validate_owsd_ubusproxy || {
 		echo "Ubusproxy validation failed"
@@ -311,51 +275,37 @@ start_service() {
 	}
 
 	if [ "${enable}" -eq 1 ]; then
-		json_add_object "ubusproxy"
+		procd_append_param command -U
 
-		[ -n "${peer_cert}" ] && json_add_string "peer_cert" "${peer_cert}"
-		[ -n "${peer_key}"  ] && json_add_string "peer_key" "${peer_key}"
-		[ -n "${peer_ca}"   ] && json_add_string "peer_ca" "${peer_ca}"
+		[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
+		[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
+		[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
 
 		append_peer () {
-			[ -n "$1"   ] && json_add_string "peer" "$1"
+			[ -n "$1"   ] && procd_append_param command -P"$1"
 		}
 
 		append_object () {
-			[ -n "$1"   ] && json_add_string "object" "$1"
+			[ -n "$1"   ] && procd_append_param command -U"$1"
 		}
 
-		json_add_array "peer"
 		config_list_foreach "ubusproxy" "peer" append_peer
-		json_close_array
-		json_add_array "object"
 		config_list_foreach "ubusproxy" "object" append_object
-		json_close_array
 
-		[ "${prefix}" == "mac" ] && json_add_string "prefix" "mac"
-		json_close_object
+		[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
 	fi
 
-	json_add_object "owsd-listen"
 	config_foreach parse_owsd_iface "owsd-listen"
-	json_close_object
-	json_dump > /dev/console
 
-	[ ! -d "/tmp/owsd" ] && mkdir /tmp/owsd
-	json_dump > /tmp/owsd/owsd_cfg.json
 #	procd_set_param stderr 1
 	procd_set_param respawn
 
 	procd_close_instance
-
-	if [ "${enable}" -eq 1 ]; then
-		# Start uproxyd
-		procd_open_instance
-		procd_set_param command $UPROXYD
-		procd_set_param respawn
-		procd_close_instance
-	fi
-
+	# Start uproxyd
+	procd_open_instance
+	procd_set_param command $UPROXYD
+	procd_set_param respawn
+	procd_close_instance
 }
 
 #stop_service()

owsd/files/owsd.uci_default

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+MGMT_INTERFACES=""
+OWSD_INTERFACES=""
+NOT_DEFAULT=0
+
+mgmt_interfaces() {
+	local interface=$1
+	[ "$interface" == "loopback" ] && return
+	[ "$interface" == "lan" ] && return
+	[ "$interface" == "wan" ] && return
+	[ "$interface" == "wan6" ] && return
+
+	local type proto
+	config_get type $interface type
+	config_get proto $interface proto "none"
+	[ "$type" == "bridge" -a "$proto" == "none" ] && return
+
+	local is_lan
+	config_get is_lan $interface is_lan
+	[ "$is_lan" == "1" ] && return
+
+	local ifname
+	config_get ifname $interface ifname
+	[ "${ifname:0:1}" == "@" ] && return
+
+	MGMT_INTERFACES="$MGMT_INTERFACES $interface"
+}
+
+owsd_interfaces() {
+	local config=$1
+	local interface
+	config_get interface $config interface
+	[ "$interface" == "loopback" ] && return
+	[ "$interface" == "lan" ] && return
+	[ "$interface" == "wan" ] && return
+	[ "$interface" == "wan6" ] && return
+
+	OWSD_INTERFACES="$OWSD_INTERFACES $interface"	
+
+	NOT_DEFAULT=1
+}
+
+not_owsd() {
+	local interface=$1
+	local there=0
+	for owsd in $OWSD_INTERFACES; do
+		if [ "$interface" == "$owsd" ]; then
+			there=1
+			break
+		fi
+	done
+	return $there
+}
+
+config_load network
+config_foreach mgmt_interfaces interface
+
+config_load owsd
+config_foreach owsd_interfaces owsd-listen
+
+if [ $NOT_DEFAULT -eq 0 ]; then
+	for mgmt in $MGMT_INTERFACES; do
+		if $(not_owsd $mgmt); then
+			uci -q set owsd.$mgmt=owsd-listen
+			uci -q set owsd.$mgmt.port=80
+			uci -q set owsd.$mgmt.interface="$mgmt"
+			uci -q set owsd.$mgmt.ipv6="on"
+			uci -q set owsd.$mgmt.whitelist_interface_as_origin="1"
+			uci -q set owsd.$mgmt.origin="*"
+
+			uci -q set owsd.$mgmt"_8080"=owsd-listen
+			uci -q set owsd.$mgmt"_8080".port=8080
+			uci -q set owsd.$mgmt"_8080".interface="$mgmt"
+			uci -q set owsd.$mgmt"_8080".ipv6="on"
+			uci -q set owsd.$mgmt"_8080".whitelist_interface_as_origin="1"
+			uci -q set owsd.$mgmt"_8080".origin="*"
+
+			uci commit owsd
+		fi
+	done
+fi
+
+exit 0
+

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=769430115b6dd984313574c3fa2a6d99c65cd223
+PKG_SOURCE_VERSION:=02903ce5b594420331f80c6973fa3635921d7080
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

questd/Makefile

@@ -1,14 +1,14 @@
 #
-# Copyright (C) 2013-2019 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=4.1.0
+PKG_VERSION:=3.1.40
 
-PKG_SOURCE_VERSION:=3c7c4da8cdf14e4abb75a41e3ef9f2eddc9d75ae
+PKG_SOURCE_VERSION:=9edeefb6942c1a806a82274d124d8889bfb4f8e7
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -27,7 +27,7 @@ else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
 QUESTD_TARGET:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_intel_mips),y)
 # BUG FIXME the Intel mips target is not handled in questd this is just to get it to compile
-QUESTD_TARGET:=-DIOPSYS_INTEL
+QUESTD_TARGET:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 QUESTD_TARGET:=-DIOPSYS_MEDIATEK
 QUESTD_CFLAGS:=\
@@ -59,6 +59,7 @@ define Package/questd/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/graphd $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
 endef

rulengd/Makefile

@@ -1,20 +1,21 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018 Inteno
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=ad94ccdd82b22527ab32937ca1a2682030319ed3
+PKG_SOURCE_VERSION:=99881f39232154530ac129dc2109d78963017ad1
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
 

rulengd/files/etc/config/ruleng

@@ -0,0 +1,7 @@
+config rule
+    option event 'test.event'
+    list event_data "{'test': 1, 'reason': 1}"
+    list event_data "{'tests': [1, 2, 3]}"
+    option method 'file->write'
+    list method_data "{'path': '/tmp/test_event.txt'}"
+    list method_data "{'data': 'test event received!'}"

samba3/files/samba.init

@@ -72,25 +72,9 @@ hex_filter() {
 	IFS=';'
 	for i in $hex_chars;
 	do
-		local filtered
-
-		IFS=' '
-		filtered=${dump//$i/}
-
-		set -- $i
-		divider=$#
-
-		set -- $dump
-		start=$#
-
-		set -- $filtered
-		end=$#
-
-		wc=$((start-end))
-		wc=$((wc/divider))
-
-		[ $wc -eq 0 ] || wc_tot=$((wc_tot+wc))
-		IFS=';'
+		local wc
+		wc=$(echo "$dump" | grep -o "$i" | wc -w)
+		wc_tot=$((wc_tot+wc))
 	done
 
 	[ $wc_tot -gt $wc_max ] && echo "corrupt"

topologyd/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=c77089efc41ea3292125330221bd5016796631b9
+PKG_SOURCE_VERSION:=a6292375108a6d5f200f234f5eef3fe17f427092
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -59,10 +59,9 @@ define uboot/grx500
   TITLE:=U-Boot for the grx
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=10
+  PKG_RELEASE:=8
 endef
 
-# obsolete: no longer supported
 define uboot/grx500_speedport_smart3
   TITLE:=U-Boot for the Speedport Smart3
   UBOOT_IMG:=u-boot-nand.bin
@@ -74,7 +73,7 @@ define uboot/grx500_norrland
   TITLE:=U-Boot for Norrland Board
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=14
+  PKG_RELEASE:=8
 endef
 
 UBOOTS := \
@@ -124,13 +123,8 @@ define Build/Compile
 		CROSS_COMPILE=$(TARGET_CROSS) env
 endef
 
-# don't install /etc/init.d/uboot for intel-mips as it's not needed
 define Package/uboot/install/default
-	$(INSTALL_DIR) $$(1)/lib/upgrade
-	$(CP) ./files/uboot-upgrade $$(1)/lib/upgrade/
-	$(if $(CONFIG_TARGET_intel_mips), ,$(INSTALL_DIR) $$(1)/etc/init.d)
-	$(if $(CONFIG_TARGET_intel_mips), ,$(CP) ./files/uboot $$(1)/etc/init.d/)
-
+	$(CP) ./files/* $$(1)/
 	$(INSTALL_DIR) $(BIN_DIR)/$(TARGET)
 	$(INSTALL_DIR) $$(1)/boot
 	$(CP) \

uboot/files/etc/init.d/uboot

@@ -1,6 +1,10 @@
+#!/bin/sh /etc/rc.common
+
+START=50
 
 . /usr/share/libubox/jshn.sh
 
+
 sanity_check_env(){
 
     # make sure iboot is used to start board, but only if verify_boot != 1
@@ -22,24 +26,18 @@ sanity_check_env(){
     fw_setenv baudrate 115200
 }
 
-do_uboot_upgrade(){
+uboot_upgrade(){
     local u_ver
     echo "doing upgrade of u-boot old version $cur_Major.$cur_Minor new version $Major.$Minor"
     mtd erase /dev/mtd0
-    mtd write $1 /dev/mtd0
+    mtd write /boot/uboot.img /dev/mtd0
     u_ver=$(strings  /dev/mtd0 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb)
     [ -n "$u_ver" ] && fw_setenv uboot_inteno_version "$u_ver"
     sanity_check_env
 }
 
 
-# Return:
-# 0: update is successfull
-# 1: update is not needed
-# 2: error occured
-uboot_upgrade() {
-    [ ! -f $1 ] && return 2
-
+start() {
     iver=$(fw_printenv -n uboot_inteno_version 2>/dev/null)
 
     # Fixup improper json string for major and minor key.
@@ -49,8 +47,8 @@ uboot_upgrade() {
     if [ -z "$iver" ]
     then
 	# if this variable is not set by u-boot the u-boot version is too old.
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     # read in current version into Major Minor variables
@@ -65,7 +63,7 @@ uboot_upgrade() {
     cur_Minor=$Minor
 
     # read in new uboot version into Major Minor variables
-    json_load $(strings $1 | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
+    json_load $(strings /boot/uboot.img | grep 938f0820-2ffb-11e7-bbc9-2f21351ee6fb |sed -e 's/938f0820-2ffb-11e7-bbc9-2f21351ee6fb: //')
     json_get_vars Major Minor
 
 #    echo "Major $Major"
@@ -73,15 +71,14 @@ uboot_upgrade() {
     
     if [ $Major -gt $cur_Major ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
 
     if [ $Major -eq $cur_Major -a $Minor -gt $cur_Minor ]
     then
-	do_uboot_upgrade $1
-	return 0
+	uboot_upgrade
+	return
     fi
-
-    return 1
 }
+

uboot/files/uboot

@@ -1,8 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=50
-
-start() {
-	. /lib/upgrade/uboot-upgrade
-	uboot_upgrade /boot/uboot.img
-}

uspd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2019 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=uspd
-PKG_VERSION:=1.0.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=50a4346d518fd80d22cd9694ee3c1dba336bd072
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/uspd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=USP ubus backend
-  DEPENDS:=+libubox +ubus +icwmp-curl
-endef
-
-define Package/uspd/description
- Ubus based backend for TR-369/USP which can be used by other USP agents
- running on top of it.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-#define Build/Prepare
-#        $(CP) -rf ./uspd/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/uspd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,uspd))

uspd/files/uspd.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/uspd
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}

voice-client/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2014 iopsys
+# Copyright (C) 2014 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -11,19 +11,6 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-VOICE_LIB:=broadcom.sh
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-VOICE_LIB:=intel.sh
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-VOICE_LIB:=broadcom.sh
-else
-$(info (UNEXPECTED CONFIG TARGET))
-VOICE_LIB:=broadcom.sh
-endif
-
 define Package/voice-client
   SUBMENU:=Telephony
   SECTION:=net
@@ -45,26 +32,7 @@ define Build/Compile
 endef
 
 define Package/voice-client/install
-	$(CP) ./files/etc $(1)/
-	$(CP) ./files/sbin $(1)/
-	$(CP) ./files/usr $(1)/
-	mkdir -p $(1)/lib/voice
-	$(CP) ./files/lib/cw.sh $(1)/lib/.
-	$(CP) ./files/lib/voice/$(VOICE_LIB) $(1)/lib/voice/voicelib.sh
-
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	sed -i \
-	-e 's/brcm/tapi/g' \
-	-e 's/BRCM/TAPI/g' \
-	-e 's/broadcom/intel/g' \
-	$(1)/etc/config/voice_client \
-	$(1)/etc/asterisk_templates/*
-	sed -i \
-	-e '/echo_cancel/d' \
-	-e "/config.*tel_advanced.*TEL/a \        option 'echo_cancel' '1'" \
-	$(1)/etc/config/voice_client
-
-endif
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,voice-client))

voice-client/files/etc/asterisk_templates/brcm_line.TEMPLATE

@@ -6,7 +6,7 @@ autodial_timeoutmsec=|AUTODIAL_TIMEOUT|
 dialtone_timeoutmsec=|DIALTONE_TIMEOUT|
 context=|CONTEXT|
 context_direct=|CONTEXT|-direct
-dialtone_extension_hint_context=|LINE_NAME|_dialtone
+dialtone_extension_hint_context=brcm_dialtone
 dialtone_extension_hint=|DIALTONE_EXTENSION_HINT|
 callwaiting=|CALLWAITING|
 clir=|CLIR|

voice-client/files/etc/asterisk_templates/extensions_macro.conf.TEMPLATE

@@ -130,7 +130,7 @@ exten => s,1,			Goto(s-${DIALSTATUS},1)
 exten => s,n,			Hangup()
 
 ;handle busy (with CBBS support)
-exten => s-BUSY,1,		Read(DIGIT,Busy,1,i,30)
+exten => s-BUSY,1,		Read(DIGIT,Busy,1,in,30)
 exten => s-BUSY,n,		GotoIf($["${DIGIT}" = "${ARG8}"]?ccbs)
 exten => s-BUSY,n,		Hangup()
 exten => s-BUSY,n(ccbs),	Set(result=${SHELL(/usr/lib/asterisk/cbbs.sh ${ARG1} ${ARG2} ${ARG3} ${ARG4} ${ARG5} ${ARG6} ${ARG7})})

voice-client/files/etc/config/voice_client

@@ -1,4 +1,4 @@
-config 'tel_line' 'brcm0'
+config 'brcm_line' 'brcm0'
 	option 'extension' '0000'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -9,7 +9,7 @@ config 'tel_line' 'brcm0'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm1'
+config 'brcm_line' 'brcm1'
 	option 'extension' '1111'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -20,7 +20,7 @@ config 'tel_line' 'brcm1'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm2'
+config 'brcm_line' 'brcm2'
 	option 'extension' '2222'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -31,7 +31,7 @@ config 'tel_line' 'brcm2'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm3'
+config 'brcm_line' 'brcm3'
 	option 'extension' '3333'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -42,7 +42,7 @@ config 'tel_line' 'brcm3'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm4'
+config 'brcm_line' 'brcm4'
 	option 'extension' '4444'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -53,7 +53,7 @@ config 'tel_line' 'brcm4'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm5'
+config 'brcm_line' 'brcm5'
 	option 'extension' '5555'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -64,7 +64,7 @@ config 'tel_line' 'brcm5'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm6'
+config 'brcm_line' 'brcm6'
 	option 'extension' '6666'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -75,7 +75,7 @@ config 'tel_line' 'brcm6'
 	option 'callwaiting' '0'
 	option 'clir' '0'
 
-config 'tel_line' 'brcm7'
+config 'brcm_line' 'brcm7'
 	option 'extension' '7777'
 	option 'sip_account' 'sip0'
 	option 'noise' '0'
@@ -116,7 +116,7 @@ config 'sip_advanced' 'SIP'
 	option 'dnsmgr_refresh_interval' '300'
 	option 'srvlookup' 'yes'
 
-config 'tel_advanced' 'TEL'
+config 'brcm_advanced' 'BRCM'
 	option 'country' 'SWE'
 	option 'jbenable' 'yes'
 	option 'jbforce' 'no'

voice-client/files/etc/init.d/voice_client

@@ -6,8 +6,6 @@
 #
 . /lib/functions.sh
 . /lib/functions/network.sh
-. /lib/voice/voicelib.sh
-
 HOOKS=/usr/lib/inithooks/voice_client
 if [ -f "$HOOKS" ] ; then
 	. $HOOKS
@@ -17,8 +15,8 @@ START=60
 USE_PROCD=1
 
 # Some global variables
-SERIAL="$(getSerial)"
-BASEMAC="$(getBaseMAC)"
+SERIAL=$(cat /proc/nvram/SerialNumber)
+BASEMAC=$(cat /proc/nvram/BaseMacAddr | sed 's/ //g')
 MODULENAME=voice
 USERAGENT="Inteno_${SERIAL}_${BASEMAC}"
 
@@ -32,11 +30,8 @@ ASTERISKDIR=/etc/asterisk
 WORKDIR=/tmp/$MODULENAME.$$
 MD5SUMSFILE=/tmp/$MODULENAME-sums.$$
 
-LINENAME="$(getLineName)"
-CHANNELNAME="$(getChannelName)"
-
-# Whitespace separated list of $CHANNELNAME feature access codes
-CHANNEL_FAC=
+# Whitespace separated list of BRCM feature access codes
+BRCM_FAC=
 
 #TODO: go through templates, check usage
 
@@ -85,8 +80,8 @@ TMPL_ACL=$TEMPLATEDIR/acl.conf.TEMPLATE
 TMPL_CONFBRIDGE=$TEMPLATEDIR/confbridge.conf.TEMPLATE
 TMPL_UDPTL=$TEMPLATEDIR/udptl.conf.TEMPLATE
 
-TMPL_CHANNEL=$TEMPLATEDIR/$LINENAME.conf.TEMPLATE
-TMPL_CHANNEL_LINE=$TEMPLATEDIR/tel_line.TEMPLATE
+TMPL_BRCM=$TEMPLATEDIR/brcm.conf.TEMPLATE
+TMPL_BRCM_LINE=$TEMPLATEDIR/brcm_line.TEMPLATE
 
 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE
 
@@ -185,7 +180,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/sip_registrations.tmp	$WORKDIR/sip_registrations.conf
 	mv $WORKDIR/sip_providers.tmp		$WORKDIR/sip_providers.conf
 	mv $WORKDIR/sip_users.tmp		$WORKDIR/sip_users.conf
-	mv $WORKDIR/$LINENAME.tmp		$WORKDIR/$LINENAME.conf
+	mv $WORKDIR/brcm.tmp			$WORKDIR/brcm.conf
 	mv $WORKDIR/extensions.tmp		$WORKDIR/extensions.conf
 	mv $WORKDIR/codecs.tmp			$WORKDIR/codecs.conf
 	mv $WORKDIR/rtp.tmp			$WORKDIR/rtp.conf
@@ -256,13 +251,13 @@ read_codecs_ptime()
 # in a Dial() command
 #
 # For backwards compatibility, if i is only a number (not prefixed by
-#	"SIP/" or "CHANNEL/") then add "CHANNEL/"
+#	"SIP/" or "BRCM/") then add "BRCM/"
 #
 read_lines()
 {
 	local lines=""
 	local call_lines
-	local fxsIdx fxsEpt dectIdx dectEpt
+	local fsxIdx fsxEpt dectIdx dectEpt
 
 	# Are lines already set by user conf?
 	config_get call_lines $1 call_lines
@@ -281,19 +276,19 @@ read_lines()
 		if test $(db get hw.board.hasVoice) = "1"; then
 			# Get the first FSX voice endpoint index by
 			# searching for the name usually used.
-			fxsIdx=$(echo $voiceNames | \
+			fsxIdx=$(echo $voiceNames | \
 				awk -e '{
 					i = 1;
 					while(i <= NF && tolower($i) !~ /^tel.*$/) {
 						i++;
 					}
 					print i;
-				}'
-			)
+				}
+			')
 	
 			# Convert index to endpoint ID
-			if test $fxsIdx -gt 0; then
-				fxsEpt=$(echo $voicePorts | awk '{ print $'$fxsIdx' }')
+			if test $fsxIdx -gt 0; then
+				fsxEpt=$(echo $voicePorts | awk '{ print $'$fsxIdx' }')
 			fi
 
 			hasVoice=1
@@ -320,9 +315,7 @@ read_lines()
 		fi
 
 		if test $hasVoice -eq 1; then
-		        call_lines="$dectEpt $fxsEpt"
-		        # Remove leading/trailing spaces
-			call_lines=$(echo $call_lines | xargs echo -n)
+			call_lines="$dectEpt $fsxEpt"
 
 			# If we didn't find any endpoint ID we
 			# fallback to activate them all.
@@ -340,7 +333,7 @@ read_lines()
 	for i in $call_lines ; do
 		case $i in
 			''|*[!0-9]*)	lines=$lines"$i&" ;;
-			*) 				lines=$lines"$CHANNELNAME/$i&" ;;
+			*) 				lines=$lines"BRCM/$i&" ;;
 		esac
 		
 	done
@@ -1035,9 +1028,9 @@ configure_queue()
 	do
 		local out=""
 		re='^[0-9]+$'
-		num=${member#$LINENAME}
+		num=${member#brcm}
 		if [ -z "${num##[0-9]*}" ] ; then
-			out="$CHANNELNAME/$num"
+			out="BRCM/$num"
 		else
 			local sip_user
 			config_get sip_user $member user
@@ -1164,7 +1157,7 @@ configure_cdr()
 configure_call_filters()
 {
 	local country
-	config_get country TEL country
+	config_get country BRCM country
 	# Read the International Dialing Code and the Country Code from config
 
 	echo "Looking up IDC and CC for country $country"
@@ -1442,7 +1435,7 @@ configure_extensions()
 	fi
 
 	if [ -n "$extension_all_ports" ] ; then
-		local all_lines=$(getAllLines)
+		local all_lines="BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
 		echo "exten => $extension_all_ports,1,Dial($all_lines,,t)"	>> $WORKDIR/extensions_local.tmp
 		echo "exten => $extension_all_ports,n,Hangup()"			>> $WORKDIR/extensions_local.tmp
 	fi
@@ -1456,6 +1449,7 @@ configure_extensions()
 		echo "exten => $test_echo_extension,1,Echo()"			>> $WORKDIR/extensions_local.tmp
 		echo "exten => $test_echo_extension,n,Hangup()"			>> $WORKDIR/extensions_local.tmp
 	fi
+
 	
 	if [ -n "$record_message_extension" ] ; then
 		echo "exten => $record_message_extension,1,Playback(beep)"		>> $WORKDIR/extensions_local.tmp
@@ -1469,7 +1463,7 @@ configure_extensions()
 		sed -i "s/|CLIR_FAC_SET|//"		$WORKDIR/extensions.tmp
 		sed -i "s/|CLIR|/$clir/"		$WORKDIR/extensions.tmp
 		sed -i "s/|CLIR_FAC_LEN|/${#clir}/"     $WORKDIR/extensions.tmp
-		CHANNEL_FAC="$CHANNEL_FAC $clir."
+		BRCM_FAC="$BRCM_FAC $clir."
 	else
 		sed -i "s/|CLIR_FAC_SET|/;/"		$WORKDIR/extensions.tmp
 	fi
@@ -1481,7 +1475,6 @@ configure_extensions()
 #
 configure_extensions_provider()
 {
-	echo COMES HERE
 	local enabled
 	local displayname
 	local user
@@ -1692,7 +1685,7 @@ configure_extensions_provider()
 	echo "exten => $user,n(norewrite),NoOp()">>							$tmp
 
 	# read a list of lines that should be dialled on incoming calls
-	incoming_lines="$(read_lines $1)"
+	incoming_lines=$(read_lines $1)
 	config_get call_queue $1 call_queue
 	config_get call_ivr $1 call_ivr
 	if [ -n "$incoming_lines" ]; then
@@ -1729,9 +1722,9 @@ configure_extensions_provider()
 }
 
 #
-# Create a local extension for a CHANNEL Line
+# Create a local extension for a BRCM Line
 #
-configure_tel_line_extension()
+configure_brcm_line_extension()
 {
 	local line
 	local extension
@@ -1741,9 +1734,8 @@ configure_tel_line_extension()
 	local cbbs_retrytime
 	local cbbs_waittime
 	local mailbox
-	local line_name=$LINENAME
 	
-	line=${1:${#line_name}}
+	line=${1:4}
 	config_get extension $1 extension
 
 	if [ -z "$line" ] ; then
@@ -1768,7 +1760,7 @@ configure_tel_line_extension()
 	
 		cp $TMPL_EXTENSIONS_LOCAL_LINE			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|EXTEN|/$extension/g"			$WORKDIR/extensions_local_line.tmp
-		sed -i "s/|LINE|/$(getLineIdx $line)/g"		$WORKDIR/extensions_local_line.tmp
+		sed -i "s/|LINE|/$line/g"			$WORKDIR/extensions_local_line.tmp
 		sed -i "s/|TIMEOUT|/$(get_voicemail_timeout)/g"	$WORKDIR/extensions_local_line.tmp
 
 		#cbbs settings
@@ -1841,16 +1833,16 @@ configure_codecs()
 {
 	echo "Configuring codecs"
 	local genericplc
-	config_get genericplc TEL genericplc
+	config_get genericplc BRCM genericplc
 	sed -i "s/|PLC|/$genericplc/"			$WORKDIR/codecs.tmp
 }
 
 #
-# Configure default settings for $LINENAME.conf
+# Configure default settings for brcm.conf
 #
-configure_tel()
+configure_brcm()
 {
-	echo "Configuring $CHANNELNAME"
+	echo "Configuring BRCM"
 	local jbenable
 	local jbforce
 	local jbmaxsize
@@ -1858,48 +1850,44 @@ configure_tel()
 	local dtmfcompatibility
 	local dialoutmsec
 	local fac
-	local echocancel
 
-	config_get jbenable TEL jbenable
-	config_get jbforce TEL jbforce
-	config_get jbmaxsize TEL jbmaxsize
-	config_get jbimpl TEL jbimpl
+	config_get jbenable BRCM jbenable
+	config_get jbforce BRCM jbforce
+	config_get jbmaxsize BRCM jbmaxsize
+	config_get jbimpl BRCM jbimpl
 	config_get dtmfmode SIP dtmfmode
-	config_get dialoutmsec TEL dialoutmsec
-	config_get fac TEL fac
-	config_get echocancel TEL echo_cancel
+	config_get dialoutmsec BRCM dialoutmsec
+	config_get fac BRCM fac
 
-	CHANNEL_FAC="$CHANNEL_FAC $fac"
+	BRCM_FAC="$BRCM_FAC $fac"
 	# Convert whitespace to commas
-	CHANNEL_FAC=$(echo $CHANNEL_FAC | sed -e 's/^ *//' -e 's/ *$//' | tr -s ' ' | tr ' ' ',')
+	BRCM_FAC=$(echo $BRCM_FAC | sed -e 's/^ *//' -e 's/ *$//' | tr -s ' ' | tr ' ' ',')
 
 	if [ -z "$dialoutmsec" ] ; then
 		dialoutmsec=4000
 	fi
 
-	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$LINENAME.tmp
-	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$LINENAME.tmp
+	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/brcm.tmp
+	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/brcm.tmp
+	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/brcm.tmp
+	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/brcm.tmp
+	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/brcm.tmp
+	sed -i "s/|FAC|/$BRCM_FAC/"				$WORKDIR/brcm.tmp
 
 	if [ "$dtmfmode" == "compatibility" ] ; then
 		dtmfcompatibility="1"
 	else
 		dtmfcompatibility="0"
 	fi
-	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$LINENAME.tmp
+	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/brcm.tmp
 }
 
 #
-# Configure settings for individual line in $LINENAME.conf
+# Configure settings for individual line in brcm.conf
 #
-configure_tel_line()
+configure_brcm_line()
 {
-	echo "Configuring $CHANNELNAME line $1"
+	echo "Configuring BRCM line $1"
 	local extension
 	local sip_provider
 	local codecs
@@ -1945,30 +1933,30 @@ configure_tel_line()
 		clir=0
 	fi
 
-	cp $TMPL_CHANNEL_LINE $WORKDIR/tel_line.tmp
-	sed -i "s/|SECTION|/$1/"				$WORKDIR/tel_line.tmp
-	sed -i "s/|CALLERID|/$extension/g"			$WORKDIR/tel_line.tmp
-	sed -i "s/|CONTEXT|/$sip_provider/g"			$WORKDIR/tel_line.tmp
-	sed -i "s/|DIALTONE_EXTENSION_HINT|/$1/"		$WORKDIR/tel_line.tmp
-	sed -i "s/|AUTODIAL|/$autodial/"			$WORKDIR/tel_line.tmp
-	sed -i "s/|AUTODIAL_TIMEOUT|/$autodial_timeout/"	$WORKDIR/tel_line.tmp
-	sed -i "s/|DIALTONE_TIMEOUT|/$dialtone_timeout/"	$WORKDIR/tel_line.tmp
-	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/tel_line.tmp
-	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/tel_line.tmp
-	sed -i "s/|CLIR|/$clir/"				$WORKDIR/tel_line.tmp
-	sed -i "s/|LINE_NAME|/$LINENAME/"			$WORKDIR/tel_line.tmp
+	cp $TMPL_BRCM_LINE $WORKDIR/brcm_line.tmp
+	sed -i "s/|SECTION|/$1/"				$WORKDIR/brcm_line.tmp
+	sed -i "s/|CALLERID|/$extension/g"			$WORKDIR/brcm_line.tmp
+	sed -i "s/|CONTEXT|/$sip_provider/g"			$WORKDIR/brcm_line.tmp
+	sed -i "s/|DIALTONE_EXTENSION_HINT|/$1/"		$WORKDIR/brcm_line.tmp
+	sed -i "s/|AUTODIAL|/$autodial/"			$WORKDIR/brcm_line.tmp
+	sed -i "s/|AUTODIAL_TIMEOUT|/$autodial_timeout/"	$WORKDIR/brcm_line.tmp
+	sed -i "s/|DIALTONE_TIMEOUT|/$dialtone_timeout/"	$WORKDIR/brcm_line.tmp
+	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/brcm_line.tmp
+	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/brcm_line.tmp
+	sed -i "s/|CLIR|/$clir/"				$WORKDIR/brcm_line.tmp
 
-	#Configure CHANNEL line with codecs according to the SIP line settings
+
+	#Configure BRCM line with codecs according to the SIP line settings
 #	local is_fax
 #	config_get is_fax $sip_provider is_fax
 # 	if [ -z "$is_fax" -o "$is_fax" = "1" ] ; then
-# 		sed -i "s/|ALLOW|/allow = ulaw\nallow = alaw/"	$WORKDIR/tel_line.tmp
+# 		sed -i "s/|ALLOW|/allow = ulaw\nallow = alaw/"	$WORKDIR/brcm_line.tmp
 # 	else
-# 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/tel_line.tmp
+# 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/brcm_line.tmp
 # 	fi
 
-	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$LINENAME.tmp
-	rm -f							$WORKDIR/tel_line.tmp
+	cat $WORKDIR/brcm_line.tmp >>				$WORKDIR/brcm.tmp
+	rm -f							$WORKDIR/brcm_line.tmp
 }
 
 #
@@ -2067,35 +2055,30 @@ pbx_fix_ownership()
 }
 
 #
-# Calculate a name for each $LINENAME line, depending on port type
+# Calculate a name for each brcm line, depending on port type
 # and number. The name is used to make UI look better.
 #
 set_line_name()
 {
 	local maxlinenum=$2
 	local curname name_ix ix item lnum
-	local line_name=$LINENAME
-	local line_name_len=${#line_name}
-	local tel_line=$1
-	
-	line=${tel_line:${line_name_len}}
 
 	# delete non-existing lines from config #
-	case $tel_line in
-		${line_name}[0-9])
-			lnum=${tel_line:${line_name_len}:1}
-			[ $((lnum+1)) -gt $maxlinenum ] && uci -q delete voice_client.$tel_line
+	case $1 in
+		brcm[0-9])
+			lnum=${1:4:1}
+			[ $((lnum+1)) -gt $maxlinenum ] && uci -q delete voice_client.$1
 		;;
 	esac
 	#########################################
 
-	config_get curname $tel_line name
+	config_get curname $1 name
 	[ -n "$curname" ] && return
 
 	name_ix=""
 	ix=0
 	for item in $(db get hw.board.VoicePortOrder); do
-		if [ "$item" == "$tel_line" ]; then
+		if [ "$item" == "$1" ]; then
 			name_ix=$ix
 			break
 		fi
@@ -2106,14 +2089,15 @@ set_line_name()
 	if [ -n "$name_ix" ]; then
 		for item in $(db get hw.board.VoicePortNames); do
 			if [ $ix -eq $name_ix ]; then
-				uci_set voice_client $tel_line name "$(echo $item | tr '[_]' '[ ]')"
+				uci_set voice_client $1 name \
+					"$(echo "$item" |tr "[_]" "[ ]")"
 				return
 			fi
 			ix=$((ix+1))
 		done
 	fi
 
-	uci_set voice_client $tel_line name $tel_line
+	uci_set voice_client $1 name $1
 }
 
 #
@@ -2163,11 +2147,11 @@ start_service() {
 	config_load voice_client
 
 	########################################################
-	# Set line names according to board parameters
+	# Set line names according to whats reported by brcminfo
 	# and delete non-existing lines from voice_client config
 	########################################################
 	local maxlinenum=$(db get hw.board.VoicePorts)
-	config_foreach set_line_name tel_line $maxlinenum
+	config_foreach set_line_name brcm_line $maxlinenum
 	uci_commit voice_client
 
 	#######################################
@@ -2180,7 +2164,7 @@ start_service() {
 	cp $TMPL_SIP			$WORKDIR/sip.tmp
 	cp $TMPL_RTP			$WORKDIR/rtp.tmp
 	cp $TMPL_STUN			$WORKDIR/res_stun_monitor.tmp
-	cp $TMPL_CHANNEL		$WORKDIR/$LINENAME.tmp
+	cp $TMPL_BRCM			$WORKDIR/brcm.tmp
 	cp $TMPL_CODECS			$WORKDIR/codecs.tmp
 	cp $TMPL_VOICEMAIL		$WORKDIR/voicemail.tmp
 	cp $TMPL_DNSMGR			$WORKDIR/dnsmgr.tmp
@@ -2224,12 +2208,12 @@ start_service() {
 	config_foreach configure_sip_user_extension sip_user
 
 	#####################
-	# CHANNEL configuration
+	# BRCM configuration
 	#####################
-	configure_tel
-	config_foreach configure_tel_line tel_line
-	config_foreach configure_tel_line_extension tel_line
-	config_foreach create_extensions_dialtone tel_line
+	configure_brcm
+	config_foreach configure_brcm_line brcm_line
+	config_foreach configure_brcm_line_extension brcm_line
+	config_foreach create_extensions_dialtone brcm_line
 	configure_codecs
 
 	###########################
@@ -2294,17 +2278,14 @@ stop_service() {
 }
 
 reload_service() {
-	start
 	#stop
-	# turn off voice led; asterisk will turn it on
-	# if there is a registered account
-	ubus call led.voice1 set '{"state":"off"}'
+	start
 
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
-	asterisk -rx "$(getChipVendor) reload"
+	asterisk -rx "brcm reload"
 }
 
 service_triggers() {

voice-client/files/etc/uci-defaults/99-voice_client

@@ -1,13 +1,5 @@
 #!/bin/sh
 
-. /lib/voice/voicelib.sh
-
-# Adapt to config section name changes
-grep -q brcm_line /etc/config/voice_client && sed -i 's/brcm_line/tel_line/g' /etc/config/voice_client
-grep -q brcm_advanced /etc/config/voice_client && sed -i 's/brcm_advanced/tel_advanced/g' /etc/config/voice_client
-grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM/TEL/g' /etc/config/voice_client
-
-# Add call filter section
 uci -q get voice_client.call_filter0 >/dev/null || {
 
 uci -q batch <<-EOT
@@ -22,7 +14,6 @@ EOT
 
 }
 
-# Add ringing schedule section
 uci -q get voice_client.RINGING_STATUS >/dev/null || {
 
 uci -q batch <<-EOT
@@ -36,28 +27,27 @@ EOT
 
 }
 
-# Default phone volume for iopsysWrt 4.X.
+# Default Broadcom phone volume for Iopsys 4.
 uci -q batch <<-EOT
-	set voice_client.$(getLineName)0.txgain=4
-	set voice_client.$(getLineName)0.rxgain=4
-	set voice_client.$(getLineName)1.txgain=4
-	set voice_client.$(getLineName)1.rxgain=4
-	set voice_client.$(getLineName)2.txgain=4
-	set voice_client.$(getLineName)2.rxgain=4
-	set voice_client.$(getLineName)3.txgain=4
-	set voice_client.$(getLineName)3.rxgain=4
-	set voice_client.$(getLineName)4.txgain=4
-	set voice_client.$(getLineName)4.rxgain=4
-	set voice_client.$(getLineName)5.txgain=4
-	set voice_client.$(getLineName)5.rxgain=4
-	set voice_client.$(getLineName)6.txgain=4
-	set voice_client.$(getLineName)6.rxgain=4
-	set voice_client.$(getLineName)7.txgain=4
-	set voice_client.$(getLineName)7.rxgain=4
+	set voice_client.brcm0.txgain=4
+	set voice_client.brcm0.rxgain=4
+	set voice_client.brcm1.txgain=4
+	set voice_client.brcm1.rxgain=4
+	set voice_client.brcm2.txgain=4
+	set voice_client.brcm2.rxgain=4
+	set voice_client.brcm3.txgain=4
+	set voice_client.brcm3.rxgain=4
+	set voice_client.brcm4.txgain=4
+	set voice_client.brcm4.rxgain=4
+	set voice_client.brcm5.txgain=4
+	set voice_client.brcm5.rxgain=4
+	set voice_client.brcm6.txgain=4
+	set voice_client.brcm6.rxgain=4
+	set voice_client.brcm7.txgain=4
+	set voice_client.brcm7.rxgain=4
 	commit voice_client
 EOT
 
-# Add firewall include
 uci -q batch <<-EOT
         delete firewall.sip
         set firewall.sip=include
@@ -71,9 +61,9 @@ EOT
 # If dtmfmode is set to the obsolete compatability change to auto
 sed -i 's/dtmfmode\s*=\s*compatibility/dtmfmode=auto/' /etc/asterisk/sip.conf
 
-if [ "$(uci get voice_client.SIP.dtmfmode)" == "compatibility" ]; then
-	uci set voice_client.SIP.dtmfmode="auto"
-	uci commit voice_client
+if [ $(uci get voice_client.SIP.dtmfmode) == 'compatibility' ]; then
+    uci set voice_client.SIP.dtmfmode='auto'
+    uci commit
 fi
 
 exit 0

voice-client/files/lib/cw.sh

@@ -1,14 +1,12 @@
 #! /bin/sh
 
-. /lib/voice/voicelib.sh
-
 if [ $2 != '?' ]; then
-    for tel_line in `uci show voice_client | grep $(getLineName) | grep $1 | cut -d . -f 2`; do
-	sed -i "/\[$tel_line\]/,/^\[/ s/\(callwaiting=\)[0-9]/\1$2/" /etc/asterisk/$(getLineName).conf
+    for brcm in `uci show voice_client | grep brcm | grep $1 | cut -d . -f 2`; do
+	sed -i "/\[$brcm\]/,/^\[/ s/\(callwaiting=\)[0-9]/\1$2/" /etc/asterisk/brcm.conf
     done
 else
-    for tel_line in `uci show voice_client | grep $(getLineName) | grep $1 | cut -d . -f 2`; do
-	status=`sed -n "/\[$tel_line\]/,/^\[/ s/callwaiting=\([0-9]\)/\1/p" /etc/asterisk/$(getLineName).conf`
+    for brcm in `uci show voice_client | grep brcm | grep $1 | cut -d . -f 2`; do
+	status=`sed -n "/\[$brcm\]/,/^\[/ s/callwaiting=\([0-9]\)/\1/p" /etc/asterisk/brcm.conf`
 	echo $status
 	exit 0
     done

voice-client/files/lib/voice/broadcom.sh

@@ -1,45 +0,0 @@
-#! /bin/sh
-# Voice library for Broadcom boards
-
-getChipVendor() {
-    echo brcm
-}
-
-getChannelName() {
-    echo BRCM
-}
-
-getLineName() {
-    echo brcm
-}
-
-getSerial() {
-    echo $(cat /proc/nvram/SerialNumber)
-}
-
-getBaseMAC() {
-    echo $(cat /proc/nvram/BaseMacAddr | sed 's/ //g')
-}
-
-getAllLines() {
-    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
-}
-
-getLineIdx() {
-    echo $1
-}
-
-getEchoCancellingValue() {
-    case $1 in
-	0)
-	    echo '0'
-	    ;;
-	1)
-	    echo '1'
-	    ;;
-	*)
-	    # Unknown value
-	    echo ''
-	    ;;
-    esac
-}

voice-client/files/lib/voice/intel.sh

@@ -1,52 +0,0 @@
-#! /bin/sh
-# Voice library for Intel boards
-
-getChipVendor() {
-    echo intel
-}
-
-getChannelName() {
-    echo TAPI
-}
-
-getLineName() {
-    echo tapi
-}
-
-getSerial() {
-    sernum=$(fw_printenv -n serial_number) 2> /dev/null
-
-    if [ $? ]; then
-	echo 0
-    else
-	echo $sernum
-    fi
-}
-
-getBaseMAC() {
-    echo $(fw_printenv -n ethaddr)
-}
-
-getAllLines() {
-    echo "TAPI/1&TAPI/2&TAPI/3&TAPI/4&TAPI/5&TAPI/6"
-}
-
-getLineIdx() {
-    i=$1
-    echo $((i+1))
-}
-
-getEchoCancellingValue() {
-    case $1 in
-	0)
-	    echo 'off'
-	    ;;
-	1)
-	    echo 'nlec'
-	    ;;
-	*)
-	    # Unknown value
-	    echo ''
-	    ;;
-    esac
-}

voice-client/files/usr/lib/asterisk/cbbs.sh

@@ -23,8 +23,6 @@
 # ./cbbs.sh BRCM 0 4444 BRCM/4 5 300 45
 #####################################################
 
-. /lib/voice/voicelib.sh
-
 #Create temporary file
 tempfile=$(mktemp)
 
@@ -33,7 +31,7 @@ echo "Channel: $1/$2/$3" >> $tempfile
 echo "MaxRetries: $5" >> $tempfile
 echo "RetryTime: $6" >> $tempfile
 echo "WaitTime: $7" >> $tempfile
-echo "Set: $(getChannelName)LINE=$4" >> $tempfile
+echo "Set: BRCMLINE=$4" >> $tempfile
 
 #On answer
 echo "Context: cbbs" >> $tempfile

voice-client/files/usr/libexec/rpcd/voice.asterisk

@@ -1,11 +1,10 @@
 #!/bin/sh
 
 . /usr/share/libubox/jshn.sh
-. /lib/voice/voicelib.sh
 
 case "$1" in
 	list)
-		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {} }'
+		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {} }'
 
 	;;
 	call)
@@ -49,8 +48,8 @@ case "$1" in
                                 done
 				json_select ..
 
-				json_add_object "tel"
-				for line in $(uci show voice_client | grep tel_line | awk -F[.,=] '{print$2}'); do
+				json_add_object "brcm"
+				for line in $(uci show voice_client | grep brcm_line | awk -F[.,=] '{print$2}'); do
 					json_add_object "$line"
 					linestate="ONHOOK"
 					linenum=${line:4}
@@ -67,7 +66,7 @@ case "$1" in
 
 			;;
 			lines)
-				subchannels=$(asterisk -x "$(getChipVendor) show status" 2>/dev/null | grep Subchannel | sort -u | wc -l)
+				subchannels=$(asterisk -x 'brcm show status' 2>/dev/null | grep Subchannel | sort -u | wc -l)
 				[ $subchannels -eq 0 ] && subchannels=2
                                 json_init
                                 json_add_int num_subchannels $subchannels
@@ -126,26 +125,6 @@ case "$1" in
                                 done < /var/log/asterisk/cdr-csv/Master.csv
 				json_dump
 			;;
-			platform)
-                                json_init
-                                json_add_string platform "$(getLineName)"
-
-				case $(getLineName) in
-				    "brcm")
-					    json_add_int lineoffset 0
-					    json_add_int chanoffset 0
-				    ;;
-				    "tapi")
-					    json_add_int lineoffset 1
-					    json_add_int chanoffset -1
-				    ;;
-			        *)
-				    # Error, unknown platform
-				    ;;
-				esac
-				
-				json_dump
-			;;
 		esac
 	;;
 esac

wifilife/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifilife
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=fe0e8fd3832ef3a70ac3938f9b458d05a349b0be
+PKG_SOURCE_VERSION:=6971890314a06200f60d4c949d9b9654029b9fc3
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)
@@ -52,8 +52,10 @@ TARGET_CFLAGS += \
 MAKE_PATH:=src
 
 define Package/wifilife/install
-	$(INSTALL_DIR) $(1)/etc
-	$(CP) -r ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/wifilife.init $(1)/etc/init.d/wifilife
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/wifiagent $(1)/usr/sbin/
 endef

wifilife/files/etc/firewall.mbid

@@ -1,67 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/mbid.sh
-
-remove_mbid_rules() {
-	old_rules="$(cat "/tmp/mbid_rules" 2>/dev/null)"
-	IFS=$'\n'
-	for old_rule in $old_rules; do
-		old_rule=${old_rule/-A /-D }
-		eval $old_rule 2>/dev/null
-	done
-	rm /tmp/mbid_rules
-}
-
-# read firewall parental rules and add repeated addresses
-append_mbid_rules() {
-	[ "$(uci -q get owsd.ubusproxy.enable)" == "1" ] || return
-
-	octets=$(get_octets)
-	mobid=$(get_mobid)
-	[ -z "$mobid" -o -z "$octets" ] && return
-
-	rule=""
-	oct2="$(echo $mobid | awk '{print $1}')"
-	oct3="$(echo $mobid | awk '{print $2}')"
-	rules="$(cat /tmp/fw3.rules.ipv4 | grep -i forward | grep -i "\-\-mac\-source")"
-	[ -z "$rules" ] && return
-
-	IFS=$'\n'
-	for rule in $rules; do
-		chain="$(echo $rule | awk '{print tolower($5)}')"
-		[ -z "$chain" -o "$chain" != "forward" ] && continue
-
-		# delete rule, replace --append with --delete
-		del_rule=${rule/-A /-D }
-		while [ -z "$(eval "$del_rule" 2>&1)" ]; do
-			:
-		done
-
-		mac=$(echo $rule | awk '{print $9}')
-
-		# re-append rule
-		eval $rule
-
-		rpt_macs=$(repeated_macs $octets $oct2 $oct3 $mac | awk '{print toupper($0)}')
-		> /tmp/mbid_rules
-		for rpt_mac in $rpt_macs; do
-			[ -z "$rpt_mac" ] && continue
-			rpt_rule=${rule/$mac/$rpt_mac}
-			del_rule=${rpt_rule/-A /-D }
-			while [ -z "$(eval "$del_rule" 2>&1)" ]; do
-				:
-			done
-
-			eval $rpt_rule
-			echo $rpt_rule >> /tmp/mbid_rules
-		done
-	done
-}
-
-while [ -f /tmp/mbid.lock ]; do
-	sleep 2
-done
-touch /tmp/mbid.lock
-remove_mbid_rules
-append_mbid_rules
-rm /tmp/mbid.lock

wifilife/files/etc/ruleng/mbid.json

@@ -1,21 +0,0 @@
-{
-	"if" : [
-		{
-			"event": "ubus.object.add",
-			"regex": true,
-			"match": {
-				"path":".*\/wifi\\.agent"
-			}
-		}
-	],
-	"then" : [
-		{
-			"object": "file",
-			"method":"exec",
-			"args": {
-				"command": "sh",
-				"params": ["/etc/firewall.mbid"]
-			}
-		}
-	]
-}

wifilife/files/etc/uci-defaults/999-wifilife-opreqs

@@ -18,27 +18,5 @@ add_dnsmasq_lease_hwmask() {
 	fi
 }
 
-add_firewall_mbid() {
-	local ubusx="$(uci -q get owsd.ubusproxy.enable)"
-	if [ -f /etc/firewall.mbid ]; then
-		uci -q get firewall.mbid || {
-				uci -q set firewall.mbid=include
-				uci -q set firewall.mbid.path="/etc/firewall.mbid"
-				uci -q set firewall.mbid.reload=1
-				uci del_list firewall.mbid._access_w=root
-				uci add_list firewall.mbid._access_w=root
-				uci commit firewall
-		}
-	fi
-}
-
-add_ruleng_section() {
-	uci -q add ruleng rule
-	uci -q set ruleng.@rule[-1].recipe='/etc/ruleng/mbid.json'
-	uci commit ruleng
-}
-
 add_owsd_object_wifi
 add_dnsmasq_lease_hwmask
-add_firewall_mbid
-add_ruleng_section

wifilife/files/lib/functions/mbid.sh

@@ -1,147 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-mobid_cb() {
-	local device mobility_domain
-
-	config_get device $1 device
-	[ "$device" != "$2" ] && return;
-
-	config_get mobility_domain $1 mobility_domain
-	echo "$mobility_domain"
-}
-
-_get_mobid() {
-	vif=$1
-	config_load wireless
-	mobid="$(config_foreach mobid_cb wifi-iface $vif)"
-	echo $mobid
-}
-
-repeated_macs() {
-	octets=$1
-	oct2=$2
-	oct3=$3
-	mac=$4
-	macs=""
-	oct456=${mac:9}
-
-	[ -z "$octets" -o -z "$oct2" -o -z "$oct3" -o -z "$mac" -o -z "$oct456" ] && return
-
-	IFS=$' '
-	for oct1 in $octets; do
-		macs="$oct1:$oct2:$oct3:$oct456 $macs"
-	done
-
-	echo "$macs"
-}
-
-# transform a mac address to all possibly repeated - recommended when parsing one or few MACs
-mac_to_repeated() {
-	mac=$1
-	octets=""
-	oct2=""
-	oct3=""
-
-	octets=$(get_octets)
-	mobid=$(get_mobid)
-	[ -z "$mobid" -o -z "$octets" ] && return
-
-	oct2="$(echo $mobid | awk '{print $1}')"
-	oct3="$(echo $mobid | awk '{print $2}')"
-
-	echo "$(repeated_macs $octets $oct2 $oct3 $mac)"
-}
-
-assocl_match_mac() {
-	mac=$1
-
-	res="$(ubus call wifix assoclist 2>/dev/null)"
-
-	json_load "$res"
-	json_select assoclist 2>/dev/null
-	json_get_keys keys
-
-	IFS=$' '
-	for key in $keys; do
-		json_select $key 2>/dev/null
-		json_get_var macaddr macaddr
-		json_select ..
-
-		[ "$macaddr" = "$mac" ] || continue
-
-		octet=$(echo $macaddr | cut -c1-2)
-		echo "$octet"
-	done
-}
-
-get_octet() {
-	ip=$1
-
-	res="$(ubus call router.net arp 2>/dev/null)"
-
-	json_load "$res"
-	json_select table 2>/dev/null
-	json_get_keys keys
-	IFS=$' '
-	for key in $keys; do
-		json_select $key 2>/dev/null
-		json_get_var ipaddr ipaddr
-		json_get_var macaddr macaddr
-		json_select ..
-
-		[ "$ipaddr" = "$ip" ] || continue
-
-		echo "$(assocl_match_mac $macaddr)"
-	done
-}
-
-# only get all first octets - use when parsing several MACS
-get_octets() {
-	octets=""
-	assoclist=""
-	neighbors=""
-
-	objects=$(ubus list | grep -E '.*\/wifix$')
-	[ -z "$objects" ] && return
-
-	for obj in $objects; do
-		ip=$(echo $obj | cut -d'/' -f1)
-		octet="$(get_octet $ip)"
-		[ "$octets" != "${octets/$octet/}" ] && continue
-		octets="$octet $octets"
-	done
-
-	echo "$octets"
-}
-
-# get only mobid - use when parsing several MACS
-get_mobid() {
-	mobid="500"
-
-	radios="$(ubus -t1 call wifix radios 2>/dev/null)"
-	[ -z "$radios" ] && return
-
-	json_load "$radios"
-	json_get_keys keys
-	IFS=$' '
-	for key in $keys; do
-		val="$(_get_mobid $key)"
-		[ -n "$val" ] && mobid=$val;
-	done
-
-	mobid=$(printf "%04x" $mobid)
-
-	# if little endian
-	if [ "$(echo -n I | hexdump -o | awk '{ print substr($2,6,1); exit}')" = "1" ]; then
-		oct2=${mobid:2}
-		oct3=${mobid%??}
-	else
-		oct2=${mobid%??}
-		oct3=${mobid:2}
-	fi
-
-	echo "$oct2 $oct3"
-}

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5ab0a61b2d8dc34be0e0053670a13876e648f94b
+PKG_SOURCE_VERSION:=c7228ea031f407580ff8e4801e0ba544aeadd050
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>