samba: security fixes for refs #17088 refs #17090

This reverts commit a5b1a612c2.

dectmngr2/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
+PKG_SOURCE_VERSION:=ace6a3dcb6aa463cf5a34ad39ac37a5bc7d4ce5e
 PKG_NAME:=dectmngr2
 
 
@@ -21,7 +21,6 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -29,7 +28,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
 endef
 
 define Package/dectmngr2/description
@@ -42,7 +41,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -50,7 +48,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

easy-soc-libs/Config.in

@@ -1,19 +0,0 @@
-if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
-menu "configurations"
-
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debugging support"
-	default n
-
-config LIBWIFI_DEBUG
-	depends on PACKAGE_libwifi
-	bool "Enable wifi debugging"
-	default n
-
-config LIBDSL_DEBUG
-	depends on PACKAGE_libdsl
-	bool "Enable xdsl debugging"
-	default n
-
-endmenu
-endif

easy-soc-libs/Makefile

@@ -1,133 +0,0 @@
-#
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=87ad01a06b7898ae45e94444e0caa7e2cc264cc8
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries
-  SUBMENU:=IOPSYS easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-endef
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-endef
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS:=+TARGET_iopsys_ramips:swconfig
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
-else
-  $(info (UNEXPECTED CONFIG TARGET))
-endif
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))

endptmngr/Makefile

@@ -8,8 +8,8 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
+PKG_VERSION:=0.1
+PKG_SOURCE_VERSION:=fa9ba5d7c942571ae6e44eb7bb5dae2c9b9e8ca4
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)

endptmngr/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.3.1
+BASE_PKG_VERSION:=5.3.6
 PKG_RELEASE:=
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=1e30a043e49669a0d0f8e656346fa52b09df10b4
+PKG_SOURCE_VERSION:=94aab1532fef2caf2d65579614fc413252a517eb
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/

ice-client/files/ice-client.uci_default

@@ -7,8 +7,7 @@ grep -rq "^ice:" /etc/passwd || {
 uci -q delete passwords.ice
 uci -q set passwords.ice=usertype
 uci -q set passwords.ice.password="\$WPAKEY"
-uci -q del_list passwords.ice._access_w=root
-uci -q add_list passwords.ice._access_w=root
+uci -q add_list passwords.ice._access_r=root
 uci -q commit passwords
 
 uci show rpcd | grep username=.*ice.* >/dev/null || {
@@ -17,7 +16,7 @@ cat >> /etc/config/rpcd << EOF
 config login
 	option username 'ice'
 	option password '\$p\$ice'
-	list _access_w 'none'
+	list _access_r 'none'
 	list write 'user-user'
 	list write 'juci-broadcom-dsl'
 	list write 'juci-broadcom-dsl-admin'
@@ -64,9 +63,5 @@ config login
 EOF
 }
 
-uci -q del_list dhcp.@domain[0].name="inteno.lan"
-uci -q add_list dhcp.@domain[0].name="inteno.lan"
-uci -q commit dhcp
-
 exit 0
 

icwmp/Config_cwmp.in

@@ -27,9 +27,5 @@ config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
 
-config LIBDATAMODEL_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-    
 endif
 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-01-28
+PKG_VERSION:=4.0-2018-12-28
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e00dfdf152a85035d411332b7a81d31853dbe61d
+PKG_SOURCE_VERSION:=942ff9d7fc177bcd19f5aeee612f814e8d6632d4
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -95,8 +95,6 @@ ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 TARGET_CFLAGS += -DEX400
 endif
 
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 

ifbt/Makefile

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

imonitor/Makefile

@@ -12,7 +12,7 @@ PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
+PKG_SOURCE_VERSION:=defec6849fb987619fc7fd9295895f4f0b9db5a9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>

imonitor/files/etc/config/imonitor

@@ -1,9 +1,8 @@
 config monitor
-	option app 'test'
-	option test 'echo test'
-	option stream 'stdout'
-	option string_match 'TEST'
-	option execute 'echo executing test'
-	option interval '10'
-	option nr_tests '2'
-
+   option app 'test'
+   option test 'echo test'
+   option stream 'stdout'
+   option string_match 'test'
+   option execute 'echo executing'
+   option interval '10'
+   option nr_tests '2'

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
+PKG_SOURCE_VERSION:=f81c146f0b07540877545e5ab644ec8e29905a4d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 

iop/configs/config

@@ -32,8 +32,7 @@ CONFIG_PACKAGE_ice-client-netrounds=m
 CONFIG_PACKAGE_ice-client-rshell=m
 CONFIG_PACKAGE_ice-client-texec=m
 CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_ifbt=y
-CONFIG_PACKAGE_imonitor=y
+CONFIG_PACKAGE_icwmp_stun=y
 CONFIG_PACKAGE_inbd=y
 CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_iperf-mt=y
@@ -43,11 +42,10 @@ CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
 CONFIG_PACKAGE_iup=y
-# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
-CONFIG_PACKAGE_juci-wifilife=y
 CONFIG_PACKAGE_juci-wireless=y
 CONFIG_PACKAGE_juci-ddns=y
 CONFIG_PACKAGE_juci-diagnostics=y
@@ -81,7 +79,7 @@ CONFIG_PACKAGE_juci-samba=y
 CONFIG_PACKAGE_juci-simple-gui=y
 CONFIG_PACKAGE_juci-snmpd=y
 CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
+CONFIG_PACKAGE_juci-theme-inteno=y
 CONFIG_PACKAGE_juci-ubus-core=y
 CONFIG_PACKAGE_juci-upnp=y
 CONFIG_PACKAGE_juci-usb=y
@@ -133,7 +131,6 @@ CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
 CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_samba3=y
 CONFIG_PACKAGE_samba3-nmbd=y
 CONFIG_PACKAGE_snmpd=y
@@ -149,9 +146,7 @@ CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
 CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_wifilife=y
-CONFIG_PACKAGE_wifimngr=y
+CONFIG_PACKAGE_wlng=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
@@ -224,7 +219,3 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_SIGNED_PACKAGES is not set
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-CONFIG_PACKAGE_ip-full=y
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_PACKAGE_iopupgrade=y
-

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -0,0 +1,5 @@
+CONFIG_BCM_I2C=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y
+

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -0,0 +1,4 @@
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -0,0 +1,4 @@
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_ENDPOINT_MODULE=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -0,0 +1,4 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -0,0 +1,16 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_natalie-dect is not set
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -0,0 +1,4 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_I2C=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -0,0 +1,5 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -0,0 +1,4 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -0,0 +1,5 @@
+CONFIG_TARGET_NO_DHD=y
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_ramips/config

@@ -0,0 +1,14 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_power-management is not set
+# CONFIG_PACKAGE_qos-scripts is not set
+# CONFIG_PACKAGE_mtd-utils-deubinize is not set
+# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
+# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
+# CONFIG_PACKAGE_mtd-utils-nanddump is not set
+CONFIG_PACKAGE_mtd-utils-nandwrite=y
+CONFIG_PACKAGE_mtk-bndstrg=y
+CONFIG_PACKAGE_igmpproxy=y
+CONFIG_PACKAGE_kmod-nf-nathelper=y
+CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
+# CONFIG_PACKAGE_endptmngr is not set

iop/iop.completion

@@ -34,8 +34,9 @@ _iop()
 
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
+             scp_changes setup_host ssh_install_key ssh_sysupgrade \
+             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
+             update_package update_feed_branches"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 
@@ -75,13 +76,7 @@ _iop()
                 fi
                 return 0
                 ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
+
             *)
                 # No arguments or arguments not supported yet
                 ;;

iop/scripts/annexconfig.sh

@@ -1,72 +0,0 @@
-#!/bin/bash
-
-function disable_add_config () {
-	local COPTION="$1"
-
-	HAVE_OPTION=`grep $COPTION .config | wc -l`
-	HAVE_OPTION_DISABLED=`grep "# $COPTION" .config | wc -l`
-	if [ "$HAVE_OPTION" = "1" ]
-	then
-		if [ "$HAVE_OPTION_DISABLED" = "0" ]
-		then
-			sed -i -e "s,$COPTION=y,# $COPTION is not set,g" .config
-		fi
-	else
-		echo "# $COPTION is not set" >> .config
-	fi
-}
-
-function enable_option () {
-	local COPTION="$1"
-#	cat .config| grep DSL
-	sed -i -e "s,# $COPTION is not set,$COPTION=y,g" .config
-#	cat .config| grep DSL
-}
-
-function annexconfig {
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	local ANNEX="$1"
-
-	disable_add_config CONFIG_TARGET_NO_DSL
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_A
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_B
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_C
-	disable_add_config CONFIG_TARGET_DSL_SADSL
-	disable_add_config CONFIG_TARGET_DSL_GFAST
-
-
-	if [ "$ANNEX" = "no" ]
-	then
-		echo "No DSL"
-		enable_option CONFIG_TARGET_NO_DSL
-	elif [ "$ANNEX" = "a" ]
-	then
-		echo "Annex A"
-		enable_option CONFIG_TARGET_DSL_ANNEX_A
-	elif [ "$ANNEX" = "b" ]
-	then
-		echo "Annex B"
-		enable_option CONFIG_TARGET_DSL_ANNEX_B
-	elif [ "$ANNEX" = "c" ]
-	then
-		echo "Annex C"
-		enable_option CONFIG_TARGET_DSL_ANNEX_C
-	elif [ "$ANNEX" = "sadsl" ]
-	then
-		echo "sadsl"
-		enable_option CONFIG_TARGET_DSL_SADSL
-	elif [ "$ANNEX" = "gfast" ]
-	then
-		echo "G.fast"
-		enable_option CONFIG_TARGET_DSL_GFAST
-	else
-		echo "Only option no,a,b,c,sadsl,gfast supported"
-	fi
-
-}
-
-register_command "annexconfig" "Select configuration annex"

iop/scripts/build_branch.sh

@@ -6,7 +6,6 @@ function build_branch_usage {
 	echo "usage: $0 build_branch <branch> <board> [<customer>]"
 	echo "example: $0 build_branch devel-new ex400 DEV"
 	echo "example: $0 build_branch_sysupgrade devel-new ex400 DEV 192.168.1.1 -n"
-	set +x
 	exit 1
 }
 
@@ -18,7 +17,6 @@ function branch_exists {
 }
 
 function build_branch {
-	set -x
 	local branch=$1
 	local board=$2
 	local customer=$3
@@ -37,7 +35,6 @@ time {
 	./iop feeds_update || build_branch_usage
 	./iop genconfig -c $board $customer || build_branch_usage
 	make -j 8 || build_branch_usage
-	set +x
 }
 }
 

iop/scripts/extract_core.sh

@@ -24,7 +24,7 @@ function extract_core {
 		echo ""
 		echo "Example: $0 extract_core"
 		echo "  -p package/utils/busybox"
-		echo "  -r feeds/lede_core"
+		echo "  -r feeds/feed_inteno_openwrt"
 		echo "  -b devel"
 	}
 

iop/scripts/feeds_update.sh

@@ -32,10 +32,9 @@ function feeds_update {
     fi
 
     # targets need to be installed explicitly
-    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p targets iopsys-ramips
-    ./scripts/feeds install -p intel_targets intel_mips
+    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-mips
+    ./scripts/feeds install -p feed_inteno_targets iopsys-brcm63xx-arm
+    ./scripts/feeds install -p feed_inteno_targets iopsys-ramips
 
     # install all packages
     ./scripts/feeds install -a 

iop/scripts/genconfig.sh

@@ -7,71 +7,52 @@ function genconfig {
 	export FILEDIR="files/"
 	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
+	export CONFIGPATH="package/feeds/iopsys/iop/configs"
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
 	export DEVELOPER=0
 	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
+	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
+	iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
+	iopsys_ramips="ex400 sdx810_ap"
+	ramips="mt7621"
 	target="bogus"
-	config_path=""
+	masterconfig=1
 
-	# Takes a board name and returns the target name in global var $target
-	set_target() {
-	    local profile=$1
+	set_target()
+	{
+	local profile=$1
 
-	    local iopsys_brcm63xx_mips=$(cd target/linux/iopsys-brcm63xx-mips; ./genconfig)
-	    local iopsys_brcm63xx_arm=$(cd target/linux/iopsys-brcm63xx-arm; ./genconfig)
-	    local iopsys_ramips=$(cd target/linux/iopsys-ramips; ./genconfig)
-	    local intel_mips=$(cd target/linux/intel_mips; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]
-	    then
-		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
-		do
-		    echo "$list based boards:"
-		    for b in ${!list}
-		    do
-			echo -e "\t$b"
-		    done
-		done
-		return
-	    fi
-
-	    local targets
-
-	    for p in $iopsys_brcm63xx_mips; do
+	for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_mips"
-			config_path="target/linux/iopsys-brcm63xx-mips/config"
-		    return
+			target="iopsys_brcm63xx_mips"
+			return
 		fi
-	    done
+	done
 
-	    for p in $iopsys_brcm63xx_arm; do
+	for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_arm"
-			config_path="target/linux/iopsys-brcm63xx-arm/config"
-		    return
+			target="iopsys_brcm63xx_arm"
+			return
 		fi
-	    done
+	done
 
-	    for p in $iopsys_ramips; do
+	for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			config_path="target/linux/iopsys-ramips/config"
-		    return
+			target="iopsys_ramips"
+			return
 		fi
-	    done
+	done
 
-	    for p in $intel_mips; do
+	for p in $ramips; do
 		if [ $p == $profile ]; then
-		    target="intel_mips"
-			config_path="target/linux/intel_mips/config"
-		    return
+			target="ramips"
+			masterconfig=0
+			return
 		fi
-	    done
+	done
 
 	}
 
@@ -83,7 +64,6 @@ function genconfig {
 		endptAllowed=0
 		natalieAllowed=0
 		mediatekAllowed=0
-		wifilifeAllowed=0
 
 		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
 		for repo in $allowedRepos; do
@@ -93,7 +73,6 @@ function genconfig {
 			endptcfg) endptAllowed=1 ;;
 			natalie-dect*) natalieAllowed=1 ;;
 			linux) mediatekAllowed=1 ;;
-			wifilife) wifilifeAllowed=1 ;;
 			esac
 		done
 	}
@@ -104,16 +83,16 @@ function genconfig {
 
 	usage() {
 		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
 		echo
 		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
 		echo -e "  -v|--verbose\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
+		echo -e "  -p|--profile\tSet profile (if exists) default juci"
 		echo -e "  -s|--override\tEnable 'Package source tree override'"
 		echo -e "  -h|--help\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
 		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo -e "  -b|--boards\tList all board types"
 		echo
 		echo "Example ./iop genconfig vg50 TELIA"
 		echo "(if no customerconfig is chosen the Inteno Config will be used)"
@@ -207,84 +186,90 @@ function genconfig {
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
+		local CUSTOMER=$2
 
-		# Validate seleced board and customers
+		# Validate seleced board and customer
 		set_target $BOARDTYPE
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
+		elif [ -n "$CUSTOMER" ]; then
+			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+				echo "Customer profile for '$CUSTOMER' does not exist"
+				exit 1
+			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					echo "Common profile configuration will be used"
+				else
 					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
 				fi
-			done
+			fi
 		fi
 
 		# Generate base config
+		# Used only for iopsys targets, not openwrt targets
 		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
-
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
-		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
+		if [ $masterconfig -eq 1 ]; then
+			v "Config $BOARDTYPE selected"
+			v "cp $CONFIGPATH/config .config"
+			cp $CONFIGPATH/config .config
 		fi
 
-		#special handling for intel_mips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
+		# Add target (soc/board specific )
+		if [ -f $CONFIGPATH/target/config ]; then
+		    cat $CONFIGPATH/target/config >> .config
+		fi
+		if [ -f $CONFIGPATH/target/$target/config ]; then
+		    cat $CONFIGPATH/target/$target/config >> .config
+		fi
+		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
+		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
+		fi
+
+		# Apply profile diff to master config if selected
+		if [ -n "$PROFILE" ]; then
+			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+				cat $CONFIGPATH/$PROFILE.diff >> .config
+			elif [ "$PROFILE" == "juci" ]; then
+				v "Default profile (juci) is selected."
+			else
+				echo "ERROR: profile $PROFILE does not exist!"
+				exit 1
+			fi
 		else
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+			v "No profile selected! Using default."
 		fi
 
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+		# Set target and profile
+		echo "CONFIG_TARGET_${target}=y" >> .config
+		echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
 		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
+		if [ -n "$CUSTOMER" ]; then
+			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
+				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
+				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
+				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+			fi
 		fi
 
 		# Set target version
@@ -304,7 +289,6 @@ function genconfig {
 			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
 			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		else
 			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
 			echo "CONFIG_BCM_OPEN=y" >> .config
@@ -312,7 +296,6 @@ function genconfig {
 			echo "CONFIG_ENDPT_OPEN=y" >> .config
 			echo "CONFIG_NATALIE_OPEN=y" >> .config
 			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
 		fi
 
 		# Force regeneration of themes
@@ -326,11 +309,20 @@ function genconfig {
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
+				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		# Temporary fixup for juci/luci profile
+		if [ "$PROFILE" == "luci" ]; then
+			sed -i '/CONFIG_DEFAULT_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+		fi
+
+		if [ $masterconfig -eq 1 ]; then
+			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		fi
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
@@ -361,7 +353,6 @@ function genconfig {
 			-h|--help) usage;;
 			-l|--list) list_customers 0 $2;;
 			-a|--list-all)list_customers 1;;
-			-b|--boards)set_target LIST;exit 0;;
 			-*)
 				echo "Invalid option: $1 "
 				echo "Try -h or --help for more information."
@@ -375,7 +366,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$1" "$2"
 	fi
 }
 

iop/scripts/generate_tarballs.sh

@@ -1,96 +1,78 @@
-#!/bin/bash
+#!/bin/sh
 
 
 build_bcmkernel_consumer() {
 	local tarfile bcmkernelcommith sdkversion
 	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
 	sdkversion=${sdkversion:0:4}${sdkversion:(-1)}
-	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}*.mk | cut -d'=' -f2)
+	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/feed_inteno_broadcom/bcmkernel/${sdkversion:0:5}*.mk | cut -d'=' -f2)
 	# do not build bcmopen sdk if it was already built before
 	[ -n "$board" -a -n "$bcmkernelcommith" ] || return
-	ssh $SERVER "test -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
 	cd ./build_dir/target-*/bcmkernel-*-${sdkversion:0:4}*/bcm963xx/release
-	bash do_consumer_release -p $profile -y -F
+	sh do_consumer_release -p $profile -y -F
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
+	scp $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
 	rm -f $tarfile
-	cd "$curdir"
+	cd $curdir
 }
 
 build_natalie_consumer() {
 	# create natalie-dect open version tar file
 	local natalieversion nataliecommith
 	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
-	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
-	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
+	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
+	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/natalie-dect/Makefile | cut -d'=' -f2)
 	[ -n "$profile" -a -n "$natalieversion" -a -n "$nataliecommith" ] || return
-	ssh $SERVER "test -f $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
 	cd ./build_dir/target-*/natalie-dect-$natalieversion/
 	mkdir natalie-dect-open-$natalieversion
-	cp -f ipkg-*/natalie-dect/lib/modules/*/extra/dect.ko natalie-dect-open-$natalieversion/dect.ko
+	cp NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko natalie-dect-open-$natalieversion/dect.ko
 	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	scp -pv natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
+	scp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
 	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
 	rm -rf natalie-dect-open-$natalieversion
 	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	cd "$curdir"
+	cd $curdir
 }
 
 build_endptmngr_consumer() {
 	# create endptmngr open version tar file
 	local endptversion endptcommith
 	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
-	endptversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
+	endptversion=$(grep -w "PKG_VERSION:" ./feeds/feed_inteno_packages/endptmngr/Makefile | cut -d'=' -f2)
+	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/endptmngr/Makefile | cut -d'=' -f2)
 	[ -n "$profile" -a -n "$endptversion" -a -n "$endptcommith" ] || return
-	ssh $SERVER "test -f $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
 	cd ./build_dir/target-*/endptmngr-$endptversion/
 	mkdir endptmngr-open-$endptversion
 	mkdir endptmngr-open-$endptversion/src
 	cp ./src/endptmngr endptmngr-open-$endptversion/src
 	cp -r ./files/ endptmngr-open-$endptversion/
 	tar -czv  endptmngr-open-$endptversion/ -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	scp -pv endptmngr-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
+	scp endptmngr-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
 	cp endptmngr-$profile-$endptversion-$endptcommith.tar.gz $curdir/
 	rm -rf endptmngr-open-$endptversion
 	rm -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	cd "$curdir"
+	cd $curdir
 }
 
 build_ice_consumer() {
 	# create ice-client open version tar file
 	local iceversion icebasever icerelease icecommith
-	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
-	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
-	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/feed_inteno_packages/ice-client/Makefile | cut -d'=' -f2)
 	iceversion=$icebasever$icerelease
 	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
-	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
+	ssh $SERVER "ls $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
 	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
 	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	scp ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
 	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
 	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	cd "$curdir"
-}
-
-build_wifilife_consumer() {
-	local ver commit
-	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	[ -n "$ver" -a -n "$commit" ] || return
-	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
-	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
-	mkdir -p wifilife-$ver/src
-	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
-	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
-	scp -pv wifilife-$target-${ver}_${commit}.tar.xz $SERVER:$FPATH/
-	cp wifilife-${target}-${ver}_${commit}.tar.xz $curdir/
-	rm -rf wifilife-$ver
-	rm -f wifilife-${target}-${ver}_${commit}.tar.xz
-	cd "$curdir"
+	cd $curdir
 }
 
 build_mediatek_kernel() {
@@ -100,7 +82,7 @@ build_mediatek_kernel() {
 	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
 	kernel=linux-${kernel_version}.*
 	[ -n "$mediatek_commit" ] || return
-	ssh $SERVER "test -f $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
+	ssh $SERVER "ls $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
 	echo "Building mediatek kernel tarball from kernel commit:"	
 	echo $mediatek_commit
 	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/$kernel
@@ -118,8 +100,8 @@ build_mediatek_kernel() {
 	cd ..
 
 	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
-	scp -pv mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
-	cd "$curdir"
+	scp mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
+	cd $curdir
 }
 
 function print_usage {
@@ -132,15 +114,12 @@ function generate_tarballs {
     SERVER="god@software.inteno.se"
     FPATH="/var/www/html/iopsys/consumer"
 
-    set -e
     git remote -v | grep -q http && return # do not continue if this is an open SDK environment
 
     target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
     board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
     profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
-    majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
-    minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
-    curdir="$PWD"
+    curdir=$(pwd)
 
 
 	# Execute user command
@@ -170,11 +149,9 @@ function generate_tarballs {
 		build_natalie_consumer
 		build_endptmngr_consumer
 		build_ice_consumer
-		build_wifilife_consumer
 	elif [ "$stk_target" == "mediatek" ]; then
 		build_mediatek_kernel
 		build_ice_consumer		
-		build_wifilife_consumer
 	else
 		echo "Invalid target: $stk_target"
 		print_usage

iop/scripts/iopupgrade.sh

@@ -1,326 +0,0 @@
-# this is a developer helper script to install firmware on a remote host with SSH
-
-function upd_usage {
-    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
-    echo ""
-    echo "   Default host is 192.168.1.1"
-    echo "   Default firmware file is the newest one found"
-    echo "   Default is to not keep configuration"
-    echo "opts:"
-    echo ""
-    echo "	-i	Interactive use, Allows to select firmware file"
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
-}
-
-function set_config_string {
-    eval `grep $1 .config`
-}
-
-function upd_ask_ok {
-    echo "Will Continue with the following settings"
-    echo "-----------------------------------------"
-    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
-    printf "%20s: %s\n"  "Host ip" "$upd_host"
-    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    echo "-----------------------------------------"
-
-    if [ "$upd_sysupgrade" == "0" ]
-       then
-	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
-    fi
-
-    echo -n "Continue? [Y/n/q]:"
-    read answer
-
-    case $answer in
-	n|N)
-	    return 1;;
-	q|Q)
-	    exit 1;;
-	y|Y|*)
-	    return 0;;
-    esac
-}
-
-function upd_select_file {
-
-    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
-	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
-	   $((lines -10)) $((cols -5)) \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_fw="$new_file"
-	upd_fw_base=$(basename $upd_fw);
-    fi
-}
-
-function upd_select_target {
-
-    dialog --keep-tite --title "Input the name/ip number of target board" \
-	   --inputbox "Name/IP" \
-	   $((lines -10)) $((cols -5)) \
-	   "$upd_host" \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_host="$new_file"
-    fi
-}
-
-
-function upd_select_reboot {
-    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"No reboot")
-	    upd_noreboot=1
-	;;
-	"Reboot")
-	    upd_noreboot=0
-	    ;;
-    esac
-}
-
-function upd_select_config {
-    dialog --keep-tite --radiolist "Should the configuration be keept" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Keep")
-	    upd_keepconf=1
-	    ;;
-	"Default")
-	    upd_keepconf=0
-	    ;;
-    esac
-}
-
-function upd_select_forceboot {
-    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceboot=1
-	    ;;
-	"Version check")
-	    upd_forceboot=0
-	    ;;
-    esac
-}
-
-function upd_select_forceimage {
-    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceimage=1
-	    ;;
-	"Only compatible")
-	    upd_forceimage=0
-	    ;;
-    esac
-}
-
-function upd_select_sysupgrade {
-    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"iopu")
-	    upd_sysupgrade=0
-	    ;;
-	"sysupgrade")
-	    upd_sysupgrade=1
-	    ;;
-    esac
-}
-
-function upd_select {
-
-    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Firmare file" "$upd_fw_base"\
-	   "Host ip" "$upd_host" \
-	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   2> $tempfile
-
-
-    case $(cat $tempfile) in
-	"Firmare file")
-	    upd_select_file
-	    ;;
-	"Host ip")
-	    upd_select_target
-	    ;;
-	"Reboot")
-	    upd_select_reboot
-	    ;;
-	"Keep config")
-	    upd_select_config
-	    ;;
-	"Force bootloader")
-	    upd_select_forceboot
-	    ;;
-	"Force image upgrade")
-	    upd_select_forceimage
-	    ;;
-	"sysupgrade")
-	    upd_select_sysupgrade
-	    ;;
-	*)
-	    return
-	;;
-    esac
-    upd_select
-}
-function upd_select_start {
-    lines=$(tput lines)
-    cols=$(tput cols)
-    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
-    trap "rm -f $tempfile" 0 1 2 5 15
-    upd_select
-
-}
-
-function ssh_upgrade {
-    upd_noreboot=0
-    upd_forceboot=0
-    upd_keepconf=0
-    upd_forceimage=0
-    upd_fw_base=""
-    upd_fw=""
-    upd_host="192.168.1.1"
-    upd_sysupgrade=0
-    do_dialog=0
-
-    while getopts "f:hnxt:iscb" opt; do
-	case $opt in
-	    n)
-		upd_noreboot=1
-		;;
-	    x)
-		upd_forceimage=1
-		;;
-	    b)
-		upd_forceboot=1
-		;;
-	    c)
-		upd_keepconf=1
-		;;
-	    v)
-		verbose=$OPTARG
-		;;
-	    f)
-		upd_fw=$OPTARG
-		;;
-	    t)
-		upd_host=$OPTARG
-		;;
-	    i)
-		do_dialog=1
-		;;
-	    s)
-		upd_sysupgrade=1
-		;;
-	    h)
-		upd_usage
-		exit 1
-		;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -n "$upd_fw" ]
-    then
-	upd_fw_base=$(basename $upd_fw);
-    else
-	set_config_string CONFIG_TARGET_BOARD
-	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
-
-	for upd_fw_base in $firmwares
-	do
-	    #echo "firmware $upd_fw"
-	    break
-	done
-	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
-    fi
-
-    [ $do_dialog -eq 1 ] && upd_select_start
-
-    if ! upd_ask_ok
-    then
-	upd_select_start
-	if ! upd_ask_ok
-	then
-	    exit 1
-	fi
-    fi
-
-    if [ ! -f $upd_fw ]
-    then
-	echo "firmware file $firmware do not exist"
-	exit 1
-    fi
-
-    if [ $upd_sysupgrade -eq 0 ]
-    then
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
-	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
-
-	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-    else
-	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
-	    echo "sysupgrade done!"
-    fi
-}
-
-register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
-
-

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh -o ConnectTimeout=60 root@$1 "sysupgrade -v $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*/*/*.y[23] | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/update_package.sh

@@ -387,7 +387,7 @@ insert_hash_in_feeds_config()
     local feed=$(get_feed_name ${PKG_DIR})
     local TO=$(cd ${PKG_DIR}; git rev-parse HEAD)
 
-    sed -i feeds.conf -e "/ ${feed} / s/\(.*\)[;^].*/\1^${TO}/"
+    sed -i feeds.conf -e "/${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
     git add feeds.conf
 }
 
@@ -441,7 +441,7 @@ check_packages()
 
 feeds_hash()
 {
-    grep -v "^#" feeds.conf | grep " $1 " | grep "\^" | sed -e "s/.*[;^]\(.*\)/\1/"
+    grep -v "^#" feeds.conf | grep " $1" | sed -e "s/.*[;^]\(.*\)/\1/"
 }
 
 insert_feed_hash_in_feeds_config()
@@ -495,59 +495,55 @@ check_feeds()
     feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
     for feed in `echo $feeds`
     do
-		feed_hash=$(feeds_hash $feed)
-		if [ -d feeds/$feed ]; then
-			in_git=$(cd feeds/$feed; git rev-parse HEAD)
+	feed_hash=$(feeds_hash $feed)
+	in_git=$(cd feeds/$feed; git rev-parse HEAD)
 
-			if [ "$feed_hash" != "$in_git" ]
-			then
+	if [ "$feed_hash" != "$in_git" ]
+	then
 
-				name=$(cd feeds/$feed;git symbolic-ref -q HEAD)
-				if [ -z "$name" ]
-				then
-					echo "Feed feeds/${feed} is at a git commit which is different from feeds.conf"
-					#echo "git id from feeds.conf [$feed_hash] git id from feeds/${feed} [$in_git]"
-					on_a_branch feeds/${feed} feed
+	    name=$(cd feeds/$feed;git symbolic-ref -q HEAD)
+	    if [ -z "$name" ]
+	    then
+		echo "Feed feeds/${feed} is at a git commit which is different from feeds.conf"
+		on_a_branch feeds/${feed} feed
 
-					#redo the test here and see if the feeds.conf and git is still different.
-					in_git=$(cd feeds/$feed; git rev-parse HEAD)
-					if [ "$feed_hash" = "$in_git" ]
-					then
-						continue
-					fi
-				fi
-
-				LOCAL=$(cd feeds/$feed;git rev-parse @)
-				REMOTE=$(cd feeds/$feed;git rev-parse @{u})
-				BASE=$(cd feeds/$feed;git merge-base @ @{u})
-
-				# if we are behind the remote automatically do a pull
-				if [ $LOCAL = $BASE ]; then
-					(cd feeds/$feed ; git pull 1>/dev/null)
-
-					#redo the test here and see if the feeds.conf and git is still different.
-					in_git=$(cd feeds/$feed; git rev-parse HEAD)
-					if [ "$feed_hash" = "$in_git" ]
-					then
-						continue
-					fi
-				fi
-
-				echo "Feed feeds/${feed} is at different commit than what is in feeds.conf"
-				#echo "git id from feeds.conf [$feed_hash] git id from feeds/${feed} [$in_git]"
-				echo -n "Should we update feeds.conf to reflect the new version ? [y/N]:"
-				read answer
-
-				case $answer in
-					n|N|'')
-						continue;;
-				esac
-				branch_uptodate feeds/${feed}
-				create_feed_message ${feed} $feed_hash $in_git  >tmp/msg
-				insert_feed_hash_in_feeds_config ${feed}
-				commit_feeds_config tmp/msg
-			fi
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
 		fi
+	    fi
+
+	    LOCAL=$(cd feeds/$feed;git rev-parse @)
+	    REMOTE=$(cd feeds/$feed;git rev-parse @{u})
+	    BASE=$(cd feeds/$feed;git merge-base @ @{u})
+
+	    # if we are behind the remote automatically do a pull
+	    if [ $LOCAL = $BASE ]; then
+		(cd feeds/$feed ; git pull 1>/dev/null)
+
+		#redo the test here and see if the feeds.conf and git is still different.
+		in_git=$(cd feeds/$feed; git rev-parse HEAD)
+		if [ "$feed_hash" = "$in_git" ]
+		then
+		    continue
+		fi
+	    fi
+
+	    echo "Feed feeds/${feed} is at different commit than what is in feeds.conf"
+	    echo -n "Should we update feeds.conf to reflect the new version ? [y/N]:"
+	    read answer
+
+	    case $answer in
+		n|N|'')
+		    continue;;
+	    esac
+	    branch_uptodate feeds/${feed}
+	    create_feed_message ${feed} $feed_hash $in_git  >tmp/msg
+	    insert_feed_hash_in_feeds_config ${feed}
+	    commit_feeds_config tmp/msg
+	fi
     done
 }
 

iopupgrade/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=iopupgrade
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=9b5ed4bc9f7ac5064414cf5feb510ffd95df6ec4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iopupgrade
-	CATEGORY:=Utilities
-	TITLE:=Iopsys system upgrade utility
-	URL:=
-#	DEPENDS:=
-endef
-
-define Package/iopupgrade/description
-	Application handling peripheral
-endef
-
-define Package/iopupgrade/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,iopupgrade))
- 

iopupgrade/files/sbin/iopu

@@ -1,277 +0,0 @@
-#!/bin/sh
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, currently used
-upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, the one we want to update
-cmdline=""	# command line settings.
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-chroot_cmdline=""	# command line for the iop_chroot command.
-board=""		# string, Board name that is going to be matched
-			# against header of firmware image
-upd_ubi_id=""		# num,	UBI volume number for the volume name
-			# "rootfs_$upd_vol", use to know what volume to run
-			# ubiupdatevol on.
-run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
-run_mount_cleanup=0	# set if we should run umount in cleanup
-upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
-upd_cfe=0		# set to 1 if system is using cfe as bootloader.
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_noreboot=0		# set to 1 if we should not reboot after programming
-upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
-upd_forceboot=0		# set this to force upgrade of boot loader
-###############################################################################
-# import external functions
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-
-###############################################################################
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/tmp/upd_log
-}
-
-# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
-# terminations. no printing to stdout/stderr allowed in this function or
-# anyhting it calls as stdout/stderr might no longer exist
-function finish {
-
-    if [ "$run_cleanup" == "1" ]
-    then
-
-	function_call upd_cleanup
-	log ""
-    fi
-
-    if [ "$run_mount_cleanup" == "1" ]
-    then
-	log "Cleaning up after mount"
-	umount_newroot
-    fi
-    # always kill the timeout process, will leave the sleep but that is harmless
-    # as long as the kill will nerver be run.
-    kill $TIMEOUT_PID 2>/dev/null
-
-    lock -u /tmp/iopu.lock
-}
-
-function sig_pipe {
-    log_stdout=0  # stdin,stdout,stderr do not exist anymore
-    log "Got sigpipe. Turning of log printing to stdout"
-}
-
-# if a timout happens terminate
-function timeout {
-    finish
-    exit 1
-}
-
-# Not much that can be done if the mount fails but to try again.
-# if after 10 seconds there still is errors abort program.
-# UBIFS has some wierd time intervall after ubiupdatevol where
-# a mount of the newly written data results in a busy error.
-function mount_retry {
-    local tries=0
-
-    while [ $tries -lt 10 ]
-    do
-	if mount $@ 2>/dev/null
-	then
-	    return
-	fi
-	tries=$((tries + 1))
-	sleep 1
-    done
-
-    log "mount failed for command [mount $@] so upgrade failed."
-
-    exit 1
-}
-
-function mount_newroot {
-    run_mount_cleanup=1
-    mkdir -p /tmp/newroot
-    mkdir -p /tmp/newroot_overlay
-
-    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
-
-    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
-    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
-
-    mount_retry --bind /dev /tmp/newroot_overlay/dev
-    mount_retry --bind /proc /tmp/newroot_overlay/proc
-    mount_retry --bind /sys /tmp/newroot_overlay/sys
-    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
-
-    mkdir -p /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
-}
-
-function umount_newroot {
-    umount /tmp/newroot_overlay/tmp/oldroot/tmp
-    umount /tmp/newroot_overlay/tmp/oldroot
-    umount /tmp/newroot_overlay/tmp
-    umount /tmp/newroot_overlay/sys
-    umount /tmp/newroot_overlay/proc
-    umount /tmp/newroot_overlay/dev
-    umount /tmp/newroot_overlay/rom
-    umount /tmp/newroot_overlay
-    umount /tmp/newroot
-    run_mount_cleanup=0
-}
-
-function usage {
-    echo "usage: $0 iopu [opts] "
-    echo ""
-    echo "opts:"
-    echo ""
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-r	Jump into chroot env of other system"
-}
-
-###############################################################################
-
-# just one instance
-# this check has to be done before we install handler to avoid removing the
-# lock even if it was not available.
-if  ! lock -n /tmp/iopu.lock
-then
-    echo "Another instance of iopu already running"
-    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
-    exit 1
-fi
-
-trap finish EXIT
-trap timeout SIGALRM
-trap sig_pipe SIGPIPE
-
-while getopts "nrxb" opt; do
-    case $opt in
-	n)
-	    upd_noreboot=1
-	    ;;
-	x)
-	    upd_forceimage=1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	r)
-	    upd_vol=$(get_flashbank_next)
-	    mount_newroot
-	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
-	    echo ""
-	    umount_newroot
-	    exit 0
-	    ;;
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-    esac
-done
-
-# put a timeout on this if it takes longer than 120 seconds we should abort
-# and clean up
-(
-sleep 120	# if 2 minutes pass
-kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
-)&
-TIMEOUT_PID=$!
-
-log "Firmware upgrade started"
-
-# Should board name be checked
-if [ $upd_forceimage -eq 0 ]
-then
-   board=$(db get hw.board.iopVerBoard)
-   cmdline="$cmdline -b $board"
-else
-    cmdline="$cmdline -q"
-fi
-
-# find out what rootfs volume is active. 
-cur_vol=$(get_flashbank_current)
-upd_vol=$(get_flashbank_next)
-
-# convert volume name "rootfs_$upd_vol" into ubifs volume id
-upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
-log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
-
-# prepare to update CFE if it exists
-function_call upd_conf_cfe
-
-# prepare to update kernel if it is stored in MTD/JFFS2 
-function_call upd_conf_kernel
-
-log "now starting writing data to flash with [ iopupgrade $cmdline -u ubi0_$upd_ubi_id ]"
-run_cleanup=1	# When we start to actually write data there might be some
-		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -u ubi0_$upd_ubi_id
-
-# in case of any error we abort
-if [ $? -ne 0 ]; then
-    log "iopupgrade program Failed"
-    exit 1
-fi
-
-log "Firmware programmed to flash."
-
-
-log "Transfering configuration to new system."
-
-# Force upgrade of boot loader
-[ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
-
-mount_newroot
-chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
-umount_newroot
-
-log "Update fully installed."
-run_cleanup=0
-
-# Now make sure that we actually boot the new system on the next reboot
-upd_finnish
-
-# spawn the reboot to a subshell to allow the main program to quit before reset
-# to avoid any hanged network connection like ssh
-if [ $upd_noreboot -eq 0 ]
-then
-    (
-	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
-			# subshell and then the trap is no longer working.
-	sleep 1
-	log "Rebooting NOW!!!"
-	log ""
-	reboot
-    )&
-    log "Reboot initiated"
-else
-    log "Skipping reboot"
-fi
-
-
-
-
-
-
-

iopupgrade/files/sbin/iopu_chroot

@@ -1,61 +0,0 @@
-#!/bin/sh
-#
-# This program is intended to be run in a chroot environment where the old system
-# is mounted in /tmp/oldroot
-#
-
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-upd_forceboot=0
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-
-###############################################################################
-# import external functions
-
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/root/upd_log
-}
-
-
-while getopts "hb" opt; do
-    case $opt in
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	\?)
-	    echo "Invalid option: -$OPTARG" >&2
-	    exit 1
-	    ;;
-    esac
-done
-
-# copy old install log over
-cp /tmp/oldroot/tmp/upd_log /root/upd_log
-
-# Upgrade boot loader if needed.
-function_call upd_program_boot
-

iopupgrade/files/sbin/iopu_chroot_env

@@ -1,18 +0,0 @@
-#!/bin/sh
-# this is run when "iopr -r" is executed.
-# intended to just show what environment is actually started.
-
-cat /etc/banner
-
-echo "/tmp/oldroot:"
-echo "	Contains the running root filesystem. It is live so files are in use"
-echo "	Anything copying/reading files from there needs to make sure it is done safely."
-echo ""
-
-Color_Off='\033[0m'       # Text Reset
-Red='\033[0;31m'          # Red
-
-PS1="${Red}chroot_new${Color_Off}:\w\#"
-export PS1
-export Red
-export Color_Off

iup/files/sbin/iup

@@ -281,7 +281,7 @@ change_to_vlan() {
 	v "option 132: committed update to file network"
 
 	# reload configuration files.
-	ubus call network reload
+	/etc/init.d/layer2_interface_vlan reload
 	v "option 132: reload network config"
 
 	# replace old interface (like eth0.1 with new eth0.101).

iwatchdog/src/src/watchdog.c

@@ -5,22 +5,15 @@
 #include <unistd.h>
 
 const char *watchdog_file = "/proc/watchdog";
-const char *watchdog_file_nvram = "/proc/nvram/watchdog";
 const char *init_string   = "1 5000000 1 4";
 const char *kicker        = "OK";
 
 int main(int argc, char **argv)
 {
-	int ret = 0;
-	char *wdt_string_prt = watchdog_file;
-        int fd = open(wdt_string_prt, O_WRONLY);
+        int fd = open(watchdog_file, O_WRONLY);
         if (fd < 0) {
-		wdt_string_prt = watchdog_file_nvram;
-		fd = open(wdt_string_prt, O_WRONLY);
-		if (fd < 0) {
-			perror("Open watchdog file");
-			exit(1);
-		}
+                perror("Open watchdog file");
+                exit(1);
         }
 
         /* init */
@@ -30,17 +23,14 @@ int main(int argc, char **argv)
                 perror("Error init watchdog");
                 exit(1);
         }
-	close(fd);
 
         while (1) {
-		fd = open(wdt_string_prt, O_WRONLY);
                 sleep(1);
                 res = write (fd, kicker, strlen(init_string) + 1);
 
                 if (res < 0 ){
                         perror("Error kicking watchdog");
                 }
-		close(fd);
         }
         return 0;
 }

libjwt/Makefile

@@ -1,52 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

libpicoevent/Makefile

@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=0.2
+PKG_VERSION:=0.1
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/libpicoevent.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7875222706cb6999af0361ef0aebdc85cd75c127
+PKG_SOURCE_VERSION:=c96770b32f66c6e799f8430d8e85d94780358135
 PKG_NAME:=libpicoevent
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

mqtt-ciotc/Makefile

@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

natalie-dect/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=natalie-dect
 PKG_VERSION:=12.26
 
-PKG_SOURCE_VERSION:=378c404fba3efc8f1bcde54370a5370670fa1853
+PKG_SOURCE_VERSION:=35fed3a10124bd660b74704011256039ba9cf54d
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -23,7 +23,7 @@ PKG_SOURCE_PROTO:=git
 endif
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
+PKG_BUILD_PARALLEL:=0
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/image.mk
@@ -34,16 +34,6 @@ BCM_KERNEL_VERSION=`cat $(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-*/include/c
 
 export BUILD_DIR
 export BCM_KERNEL_VERSION
-export CONFIG_BCM_CHIP_ID := $(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
-export CONFIG_BCM_KERNEL_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
-export CONFIG_ARCH := $(patsubst "%",%,$(CONFIG_ARCH))
-export TOOLS := $(CONFIG_BCM_TOOLCHAIN)/usr/bin/
-export TOOLPREFIX := $(CONFIG_BCM_TOOLTUPLE)
-export BRCM_MAX_JOBS := $(patsubst "%",%,$(CONFIG_BRCM_MAX_JOBS))
-export MAKE_J
-export BRCM_VERBOSE := $(if $(findstring c,$(OPENWRT_VERBOSE)),1,)
-export PKG_BUILD_DIR
-export BCM_SDK_PATH := $(BUILD_DIR)/bcmkernel/bcm963xx
 
 define Package/natalie-dect
   SECTION:=net
@@ -66,9 +56,16 @@ define Build/Compile
 endef
 endif
 
+ifeq ($(CONFIG_NATALIE_OPEN),y)
 define Package/natalie-dect/install
 	$(INSTALL_DIR) $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra
 	$(CP) $(PKG_BUILD_DIR)/dect.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
 endef
+else
+define Package/natalie-dect/install
+	$(INSTALL_DIR) $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra
+	$(CP) $(PKG_BUILD_DIR)/NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
+endef
+endif
 
 $(eval $(call BuildPackage,natalie-dect))

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=39998ad3e859a790cadcd921ff1c0e2d125528f5
+PKG_SOURCE_VERSION:=fbd7dcfab03df19b3c32675940e0aee708c7cf75
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/config/netmode

@@ -3,7 +3,3 @@ config mode 'setup'
         option detail ''
         option curmode 'routed'
 
-config tools 'tools'
-	option wificontrol 1
-	option arp_discovery 1
-

netmode/files/etc/hotplug.d/iface/01-netmode-handler

@@ -17,13 +17,11 @@ if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
 	if [ "$repeaterready" == "1" -o "${curmode:0:8}" == "repeater" ]; then
 		# flush the ip on br-lan; br-lan will anyhow be deleted.
 		# this is needed if the ip received on the wan is also from the same net
-		logger -s -p user.info -t $0: [netmode] ip addr flush dev br-lan >/dev/console
 		ip addr flush dev br-lan 2>/dev/null
 
 		# flush iptables in case the MASTER
 		# tries to configure us before
 		# firewall is disabled the proper way
-		logger -s -p user.info -t $0: [netmode] iptables -F >/dev/console
 		iptables -F
 
 		disable_firewall 1
@@ -40,7 +38,7 @@ case "$curmode" in
 			if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
 				wificontrol_takes_over || switch_netmode repeater
 			else
-				switch_netmode routed
+				/etc/init.d/netmode reload
 			fi
 		;;
 esac

netmode/files/etc/hotplug.d/net/80-repeater

@@ -13,10 +13,7 @@ case "$(uci get netmode.setup.curmode)" in
 		repeater*)
 		;;
 		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || {
-				logger -s -t "80-repeater" "ping to $defroute failed, sending USR1 to udhcpc" >/dev/console
-				killall -USR1 udhcpc
-			}
+			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
 			exit
 		;;
 esac

netmode/files/etc/netmodes/bridged/network

@@ -18,8 +18,8 @@ config interface 'lan'
 config interface 'wan'
 	option type 'anywan'
 	option proto 'dhcp'
-	option hostname 'iopsys-$MAC'
-	option vendorid '$HARDWAREID'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
 	option ifname 'ptm0.1 atm0.1 $WAN.1'
 	option ipv6 '1'
 

netmode/files/etc/netmodes/bridged/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -42,7 +42,7 @@ config wifi-iface
 	option device 'wl0'
 	option network 'lan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
+	option ssid 'Inteno-$BSSID4'
 	option encryption 'psk2'
 	option cipher 'auto'
 	option key '$WPAKEY'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -82,7 +82,7 @@ config wifi-iface
 	option device 'wl1'
 	option network 'lan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
+	option ssid 'Inteno-$BSSID4'
 	option encryption 'mixed-psk'
 	option cipher 'auto'
 	option key '$WPAKEY'

netmode/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -0,0 +1,23 @@
+{
+	"description": [
+		{ "en" : "VoIP + Bridged IPTV" },
+		{ "sv" : "VoIP + Brygg IPTV" }
+	],
+	"explanation": [
+		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
+		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
+	],
+	"credentials" : 0,
+	"excluded_boards" : [
+		"CG300",
+		"CG301",
+		"EX400",
+		"F*",
+		"SDX810-AP"
+	],
+	"acl" : [
+		"admin",
+		"support"
+	]
+}
+

netmode/files/etc/netmodes/internet_iptv_voip/dhcp

@@ -0,0 +1,22 @@
+config dnsmasq
+	option domainneeded	1
+	option boguspriv	1
+	option filterwin2k	0
+	option localise_queries	1
+	option rebind_protection 0
+	option rebind_localhost 1
+	option local	'/lan/'
+	option domain	'lan'
+	option expandhosts	1
+	option nonegcache	0
+	option authoritative	1
+	option readethers	1
+	option leasefile	'/tmp/dhcp.leases'
+	option resolvfile	'/tmp/resolv.conf.auto'
+
+config dhcp lan
+	option interface	lan
+	option start 	100
+	option limit	150
+	option leasetime	12h
+

netmode/files/etc/netmodes/internet_iptv_voip/firewall

@@ -0,0 +1,117 @@
+config settings 'settings'
+        option disabled '0'
+
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	list   network		'wan6'
+	list   network		'iptv'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

netmode/files/etc/netmodes/internet_iptv_voip/mcpd

@@ -0,0 +1,18 @@
+
+config mcpd 'mcpd'
+	option igmp_query_response_interval '10'
+	option igmp_last_member_query_interval '10'
+	option igmp_robustness_value '2'
+	option igmp_lan_to_lan_multicast '0'
+	option igmp_max_groups '25'
+	option igmp_max_sources '10'
+	option igmp_max_members '25'
+	option igmp_fast_leave '1'
+	option igmp_join_immediate '0'
+	option igmp_proxy_enable '0'
+	option igmp_snooping_enable '2'
+	option igmp_snooping_interfaces 'br-iptv'
+	option igmp_default_version '2'
+	option igmp_query_interval '120'
+	option igmp_proxy_interfaces 'iptv'
+

netmode/files/etc/netmodes/internet_iptv_voip/network

@@ -0,0 +1,88 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ipaddr '192.168.1.1'
+	option netmask '255.255.255.0'
+	option ifname '$LAN1 $LAN2 $LAN3'
+	option ip6assign '60'
+	
+config interface 'wan'
+	option type 'anywan'
+	option proto 'dhcp'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
+	option ifname 'ptm0.1 atm0.1 $WAN.1'
+	option ipv6 '1'
+
+config interface 'iptv'
+	option type 'bridge'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option defaultroute '0'
+
+config interface 'voip'
+	option type 'anywan'
+	option proto 'dhcp'
+	option gateway '0.0.0.0'
+	option reqopts 'staticroutes'
+	option ifname 'ptm0.200 $WAN.200'
+	option defaultroute '0'
+
+config interface 'wan6'
+	option proto 'dhcpv6'
+	option ifname '@wan'
+
+config device 'atmwan'
+	option type 'untagged'
+	option ifname 'atm0'
+	option name 'atm0.1'
+
+config device 'ptmwan'
+	option type 'untagged'
+	option ifname 'ptm0'
+	option name 'ptm0.1'
+
+config device 'ethwan'
+	option type 'untagged'
+	option ifname '$WAN'
+	option name '$WAN.1'
+
+config device 'ethtv'
+	option type '8021q'
+	option name '$WAN.100'
+	option ifname '$WAN'
+	option vid '100'
+	option priority '0'
+
+config device 'ptmtv'
+	option type '8021q'
+	option name 'ptm0.100'
+	option ifname 'ptm0'
+	option vid '100'
+	option priority '0'
+
+config device 'ethvoip'
+	option type '8021q'
+	option name '$WAN.200'
+	option ifname '$WAN'
+	option vid '200'
+	option priority '0'
+
+config device 'ptmvoip'
+	option type '8021q'
+	option name 'ptm0.200'
+	option ifname 'ptm0'
+	option vid '200'
+	option priority '0'
+

netmode/files/etc/netmodes/internet_iptv_voip/wireless

@@ -0,0 +1,95 @@
+config wifi-status 'status'
+	option wlan '1'
+	option wps '1'
+	option sched_status '0'
+	option schedule '0'
+
+config bandsteering 'bandsteering'
+	option enabled '0'
+	option policy '0'
+
+config apsteering 'apsteering'
+	option enabled '0'
+
+config wifi-device 'wl0'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'a'
+	option bandwidth '80'
+	option hwmode 'auto'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '1'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option beamforming '1'
+	option doth '1'
+	option dfsc '1'
+
+config wifi-iface
+	option device 'wl0'
+	option network 'lan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option ifname 'wl0'
+
+config wifi-device 'wl1'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'b'
+	option bandwidth '20'
+	option hwmode 'auto'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '1'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option doth '0'
+
+config wifi-iface
+	option device 'wl1'
+	option network 'lan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'mixed-psk'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option ifname 'wl1'
+

netmode/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS

@@ -0,0 +1,21 @@
+{
+	"description": [
+		{ "en" : "Repeater 2.4▴▾5" },
+		{ "sv" : "Repeater 2.4▴▾5" }
+	],
+	"explanation": [
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
+	],
+	"excluded_boards" : [
+		"DG15*",
+		"DG40*",
+		"EG40*",
+		"EX40*",
+		"SDX*",
+		"F*"
+	],
+	"uplink_band" : "b",
+	"credentials" : 1,
+	"reboot" : 1
+}

netmode/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network

@@ -0,0 +1,20 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option hostname 'Inteno-$BSSID4'
+	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
+	option reqopts '43'
+
+config device 'ethwan'
+	option type 'untagged'
+	option ifname '$WAN'
+	option name '$WAN.1'
+

netmode/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless

@@ -0,0 +1,93 @@
+config wifi-status 'status'
+	option wlan '1'
+	option wps '1'
+	option sched_status '0'
+	option schedule '0'
+
+config bandsteering 'bandsteering'
+	option enabled '0'
+	option policy '0'
+
+config apsteering 'apsteering'
+	option enabled '0'
+
+config wifi-device 'wl0'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'a'
+	option bandwidth '80'
+	option hwmode '11ac'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option beamforming '1'
+	option doth '1'
+	option dfsc '1'
+
+config wifi-iface
+	option device 'wl0'
+	option network 'wan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option ifname 'wl0'
+
+config wifi-device 'wl1'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'b'
+	option bandwidth '20'
+	option hwmode 'auto'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option doth '0'
+	option apsta '1'
+
+config wifi-iface
+	option device 'wl1'
+	option ifname 'wl1'
+	option network 'wan'
+	option mode 'wet'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option wps_pbc '0'
+	option wmf_bss_enable '1'
+	option ifname 'wl1'
+

netmode/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS

@@ -0,0 +1,21 @@
+{
+	"description": [
+		{ "en" : "Repeater 2.4▴▾2.4&5" },
+		{ "sv" : "Repeater 2.4▴▾2.4&5" }
+	],
+	"explanation": [
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
+	],
+	"excluded_boards" : [
+		"DG15*",
+		"DG40*",
+		"EG40*",
+		"EX40*",
+		"SDX*",
+		"F*"
+	],
+	"uplink_band" : "b",
+	"credentials" : 1,
+	"reboot" : 1
+}

netmode/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network

@@ -0,0 +1,20 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option hostname 'Inteno-$BSSID4'
+	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
+	option reqopts '43'
+
+config device 'ethwan'
+	option type 'untagged'
+	option ifname '$WAN'
+	option name '$WAN.1'
+

netmode/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless

@@ -0,0 +1,108 @@
+config wifi-status 'status'
+	option wlan '1'
+	option wps '1'
+	option sched_status '0'
+	option schedule '0'
+
+config bandsteering 'bandsteering'
+	option enabled '0'
+	option policy '0'
+
+config apsteering 'apsteering'
+	option enabled '0'
+
+config wifi-device 'wl0'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'a'
+	option bandwidth '80'
+	option hwmode '11ac'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option beamforming '1'
+	option doth '1'
+	option dfsc '1'
+
+config wifi-iface
+	option device 'wl0'
+	option network 'wan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option ifname 'wl0'
+
+config wifi-device 'wl1'
+	option type 'broadcom'
+	option country 'EU/13'
+	option band 'b'
+	option bandwidth '20'
+	option hwmode 'auto'
+	option channel 'auto'
+	option scantimer '15'
+	option wmm '1'
+	option wmm_noack '0'
+	option wmm_apsd '0'
+	option txpower '100'
+	option rateset 'default'
+	option frag '2346'
+	option rts '2347'
+	option dtim_period '1'
+	option beacon_int '100'
+	option rxchainps '0'
+	option rxchainps_qt '10'
+	option rxchainps_pps '10'
+	option rifs '0'
+	option rifs_advert '0'
+	option maxassoc '32'
+	option doth '0'
+	option apsta '1'
+
+config wifi-iface
+	option device 'wl1'
+	option ifname 'wl1'
+	option network 'wan'
+	option mode 'wet'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option wps_pbc '0'
+	option wmf_bss_enable '1'
+	option autoconf '1'
+
+config wifi-iface
+	option device 'wl1'
+	option network 'wan'
+	option mode 'ap'
+	option ssid 'Inteno-$BSSID4'
+	option encryption 'psk2'
+	option cipher 'auto'
+	option key '$WPAKEY'
+	option gtk_rekey '3600'
+	option macfilter '0'
+	option wps_pbc '1'
+	option wmf_bss_enable '1'
+	option bss_max '32'
+	option ifname 'wl1'
+

netmode/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS

@@ -0,0 +1,17 @@
+{
+	"description": [
+		{ "en" : "Repeater 2.4▴▾2.4&5" },
+		{ "sv" : "Repeater 2.4▴▾2.4&5" }
+	],
+	"explanation": [
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
+	],
+	"excluded_boards" : [
+		"*G*",
+		"F*"
+	],
+	"uplink_band" : 'b',
+	"credentials" : 1,
+	"reboot" : 1
+}

netmode/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network

@@ -0,0 +1,43 @@
+config interface 'loopback'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config device 'lan_dev'
+	option name 'eth0.1'
+	option macaddr '$MACLAN'
+	option vid 1
+
+config interface 'wan'
+	option type 'bridge'
+	option ifname 'eth0.2 eth0.1'
+	option proto 'dhcp'
+	option hostname 'Inteno-$BSSID4'
+	option reqopts '66 67 128 224 225'
+	option igmp_snooping '0'
+
+config device 'wan_dev'
+	option name 'eth0.2'
+	option macaddr '$MACWAN'
+	option vid 2
+
+config interface 'wan6'
+	option ifname '@wan'
+	option proto 'dhcpv6'
+
+config switch
+	option name 'switch0'
+	option reset '1'
+	option enable_vlan '1'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '1'
+	option ports '1 6t'
+
+config switch_vlan
+	option device 'switch0'
+	option vlan '2'
+	option ports '0 5t'
+

netmode/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless

@@ -0,0 +1,59 @@
+config wifi-status 'status'
+	option wlan '1'
+	option wps '1'
+	option sched_status '0'
+	option schedule '0'
+
+config bandsteering 'bandsteering'
+	option enabled '0'
+	option policy '0'
+
+config apsteering 'apsteering'
+	option enabled '0'
+
+config wifi-device  ra0
+	option band b
+	option channel  auto
+	option bandwidth '20'
+	option hwmode   auto
+	option htmode   HT20
+	option country 'DE'
+
+config wifi-iface
+	option device   ra0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	ra0
+	option wps_pbc	1
+
+config wifi-device  rai0
+	option band a
+	option channel  auto
+	option bandwidth '80'
+	option hwmode   11ac
+	option htmode   VHT80
+	option country 'DE'
+	option beamforming 1
+
+config wifi-iface
+	option device   rai0
+	option network  wan
+	option mode     ap
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	rai0
+	option wps_pbc	1
+
+config wifi-iface
+	option device   ra0
+	option network  wan
+	option mode     wet
+	option ssid     Inteno-$BSSID4
+	option encryption psk2
+	option key      $WPAKEY
+	option ifname	apcli0
+

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -14,5 +14,5 @@
 	"uplink_band" : 'a',
 	"downlink_band" : 'a b',
 	"credentials" : 1,
-	"reboot" : 0
+	"reboot" : 1
 }

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network

@@ -13,10 +13,9 @@ config interface 'wan'
 	option type 'bridge'
 	option ifname 'eth0.2 eth0.1'
 	option proto 'dhcp'
-	option hostname 'iopsys-$MAC'
-	option reqopts '66 67 128 224'
+	option hostname 'Inteno-$BSSID4'
+	option reqopts '66 67 128 224 225'
 	option igmp_snooping '0'
-	option macaddr '$MACWAN'
 
 config device 'wan_dev'
 	option name 'eth0.2'
@@ -40,5 +39,5 @@ config switch_vlan
 config switch_vlan
 	option device 'switch0'
 	option vlan '2'
-	option ports '0 6t'
+	option ports '0 5t'
 

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh

@@ -1,37 +0,0 @@
-#if wet in wireless config and SSID nad KEY was saved for it, apply to config
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_json()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	json_load "$(cat /tmp/netmodecfg)" 2> /dev/null
-	json_get_var ssid ssid
-	json_get_var key key
-	json_get_var encryption encryption
-	json_get_var connect_bssid connect_bssid
-
-	uci -q set wireless.$1.key="$key"
-	uci -q set wireless.$1.encryption="$encryption"
-	uci -q set wireless.$1.ssid="$ssid"
-	uci -q set wireless.$1.connect_bssid="$connect_bssid"
-	uci commit wireless
-}
-
-apply_wet_cfg()
-{
-	[ -f /tmp/netmodecfg ] || return
-
-	config_load wireless
-	config_foreach parse_wet_json "wifi-iface"
-
-	rm /tmp/netmodecfg 2> /dev/null
-}
-

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh

@@ -1,37 +0,0 @@
-#if mode wet in wireless config has SSID Key, save them
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_cfg()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	config_get ssid $interface ssid
-	config_get key $interface key
-	config_get encryption $interface encryption
-	config_get connect_bssid $interface connect_bssid
-
-	[ -n "$key" ] || return
-	[ -n "$encryption" ] || return
-
-	json_init
-	json_add_string "ssid" "$ssid"
-	json_add_string "key" "$key"
-	json_add_string "encryption" "$encryption"
-	json_add_string "connect_bssid" "$connect_bssid"
-
-	echo "`json_dump`" > /tmp/netmodecfg
-}
-
-save_wet_cfg()
-{
-	config_load wireless
-	config_foreach parse_wet_cfg "wifi-iface"
-}
-

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -23,7 +23,7 @@ config wifi-iface
 	option device   ra0
 	option network  wan
 	option mode     ap
-	option ssid     iopsys-$BSSID4
+	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
@@ -42,7 +42,7 @@ config wifi-iface
 	option device   rai0
 	option network  wan
 	option mode     ap
-	option ssid     iopsys-$BSSID4
+	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
@@ -52,7 +52,7 @@ config wifi-iface
 	option device   rai0
 	option network  wan
 	option mode     wet
-	option ssid     iopsys-$BSSID4
+	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	apclii0

netmode/files/etc/netmodes/routed_brcm/network

@@ -18,8 +18,8 @@ config interface 'lan'
 config interface 'wan'
 	option type 'anywan'
 	option proto 'dhcp'
-	option hostname 'iopsys-$MAC'
-	option vendorid '$HARDWAREID'
+	option vendorid '$HARDWAREID-INTENO'
+	option hostname 'Inteno_$MAC4'
 	option ifname 'ptm0.1 atm0.1 $WAN.1'
 	option ipv6 '1'
 

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -42,7 +42,7 @@ config wifi-iface
 	option device 'wl0'
 	option network 'lan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
+	option ssid 'Inteno-$BSSID4'
 	option encryption 'psk2'
 	option cipher 'auto'
 	option key '$WPAKEY'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -82,7 +82,7 @@ config wifi-iface
 	option device 'wl1'
 	option network 'lan'
 	option mode 'ap'
-	option ssid 'iopsys-$BSSID4'
+	option ssid 'Inteno-$BSSID4'
 	option encryption 'mixed-psk'
 	option cipher 'auto'
 	option key '$WPAKEY'

netmode/files/etc/netmodes/routed_mtk/network

@@ -12,6 +12,7 @@ config interface 'lan'
 	option netmask '255.255.255.0'
 	option ip6assign '60'
 	option ifname 'eth0.1'
+	option igmp_snooping '1'
 
 config device 'lan_dev'
 	option name 'eth0.1'
@@ -21,8 +22,8 @@ config device 'lan_dev'
 config interface 'wan'
 	option ifname 'eth0.2'
 	option proto 'dhcp'
-	option hostname 'iopsys-$MAC'
-	option vendorid '$HARDWAREID'
+	option hostname '$IOPHOSTNAME-$MAC'
+	option vendorid '$HARDWAREID-INTENO'
 	option reqopts '66 67 128 224'
 
 config device 'wan_dev'
@@ -47,5 +48,5 @@ config switch_vlan
 config switch_vlan
 	option device 'switch0'
 	option vlan '2'
-	option ports '0 6t'
+	option ports '0 5t'
 

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -18,13 +18,12 @@ config wifi-device  ra0
 	option hwmode   auto
 	option htmode   HT20
 	option country 'DE'
-	option scantimer '60'
 
 config wifi-iface
 	option device   ra0
 	option network  lan
 	option mode     ap
-	option ssid     iopsys-$BSSID4
+	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
 	option wps_pbc	1
@@ -38,13 +37,12 @@ config wifi-device  rai0
 	option htmode   VHT80
 	option country 'DE'
 	option beamforming 1
-	option scantimer '60'
 
 config wifi-iface
 	option device   rai0
 	option network  lan
 	option mode     ap
-	option ssid     iopsys-$BSSID4
+	option ssid     Inteno-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
 	option wps_pbc	1

netmode/files/etc/uci-defaults/997-owsd-with-ubusx-netmode

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-add_owsd_ubusproxy_object_netmode() {
-	local netmd=$(uci -q get owsd.ubusproxy.object | grep netmode)
-	if [ -z "$netmd" ]; then
-		uci -q add_list owsd.ubusproxy.object="netmode"
-		uci commit owsd
-	fi
-}
-
-add_owsd_ubusproxy_object_netmode

netmode/files/lib/functions/netmode.sh

@@ -1,7 +1,5 @@
 #!/bin/sh
 
-. /etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh
-. /etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh
 . /lib/functions.sh
 . /usr/share/libubox/jshn.sh
 
@@ -36,7 +34,7 @@ disable_firewall() {
 	/etc/init.d/firewall reload
 }
 
-is_known_macaddr()
+is_inteno_macaddr()
 {
 	macaddr=$1
 
@@ -107,29 +105,15 @@ correct_uplink() {
 	if [ "$link" == "up" ]; then
 		ubus call network.device set_state "{\"name\":\"$WETIF\", \"defer\":true}"
 		ifconfig $WETIF down
-		echo ethernet > /tmp/netmodes/uplink_type
 		ubus call network.device set_state "{\"name\":\"$WANDEV\", \"defer\":false}"
 	else
 		ubus call network.device set_state "{\"name\":\"$WETIF\", \"defer\":false}"
 		ifconfig $WETIF up
-		echo wireless > /tmp/netmodes/uplink_type
 		ubus call network.device set_state "{\"name\":\"$WANDEV\", \"defer\":true}"
 		ubus call led.internet  set '{"state" : "notice"}'
 	fi
 }
 
-run_netmode_scripts() {
-	local mode=$1
-	local when=$2
-	local script
-	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
-		logger -s -p user.info -t $0 "[netmode] Executing $when netmode scripts" >/dev/console
-		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
-			sh /etc/netmodes/$mode/scripts/$when/$script
-		done
-	fi
-}
-
 switch_netmode() {
 	local newmode="$1"
 
@@ -178,33 +162,15 @@ switch_netmode() {
         echo $curmode >$OLD_MODE_FILE
 
 	[ -d "/etc/netmodes/$curmode" ] || return
-
-	run_netmode_scripts $curmode "pre"
-
-	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-	save_wet_cfg
-	for file in $(ls /etc/netmodes/$curmode/); do
-		case "$file" in
-			DETAILS|scripts) continue ;;
-		esac
-		cp /etc/netmodes/$curmode/$file /etc/config/
-	done
+	cp /etc/netmodes/$curmode/* /etc/config/
+	rm -f /etc/config/DETAILS
 	sync
-	apply_wet_cfg
-
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-
-	if [ "$reboot" != "0" ]; then
-		run_netmode_scripts $curmode "post"
-		reboot &
-		exit
-	fi
 
 	/etc/init.d/environment reload
 	case "$curmode" in
 		repeater*)
 			touch $SWITCHMODELOCK
-			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
+			echo "Switching to $curmode mode" > /dev/console
 			ubus call leds set  '{"state" : "allflash"}'
 			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
 			[ -f /etc/init.d/igmpproxy ] && /etc/init.d/igmpproxy stop
@@ -222,8 +188,6 @@ switch_netmode() {
 			ubus call uci commit '{"config":"network"}'
 		;;
 	esac
-
-	run_netmode_scripts $curmode "post"
 }
 
 wificontrol_takes_over() {
@@ -259,13 +223,7 @@ wait_for_netmode_handler() {
 }
 
 netmode_get_ip_type() {
-	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
-		echo "private"
-	} || {
-		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
-		echo "public"
-	}
+	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && echo "private" || echo "public"
 }
 
 get_device_of() {
@@ -386,8 +344,7 @@ populate_netmodes() {
 			if json_select acl; then
 				_i=1
 				while json_get_var user $_i; do
-					uci del_list netmode.$mode._access_w="$user"
-					uci add_list netmode.$mode._access_w="$user"
+					uci add_list netmode.$mode._access_r="$user"
 					_i=$((_i+1))
 				done
 				json_select ..
@@ -436,19 +393,21 @@ populate_netmodes() {
 }
 
 start_netmode_tools() {
-	local curmode repeaterready wificontrol discover
+	local curmode repeaterready ulcpid
 
 	killall -9 wificontrol >/dev/null 2>&1
 	killall -9 netmode-discover >/dev/null 2>&1
 
 	config_load netmode
 	config_get_bool repeaterready setup repeaterready 0
-	config_get_bool wificontrol tools wificontrol 1
-	config_get_bool arp_discovery tools arp_discovery 1
+
+	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
 
 	[ $repeaterready -eq 1 ] && {
-		[ $arp_discovery -eq 1 ] && /sbin/netmode-discover &
-		[ $wificontrol -eq 1 ] && /sbin/wificontrol --repeater &
+		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+		kill -SIGKILL $ulcpid >/dev/null 2>&1
+		/sbin/netmode-discover &
+		/sbin/wificontrol --repeater &
 		return
 	}
 
@@ -456,8 +415,13 @@ start_netmode_tools() {
 
 	case "$curmode" in
 		repeater*)
-			[ $arp_discovery -eq 1 ] && /sbin/netmode-discover &
-			[ $wificontrol -eq 1 ] && /sbin/wificontrol --repeater &
+			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+			kill -SIGKILL $ulcpid >/dev/null 2>&1
+			/sbin/netmode-discover &
+			/sbin/wificontrol --repeater &
+		;;
+		*)
+			pidof netmode-client-detect || /sbin/netmode-client-detect &
 		;;
 	esac
 }
@@ -465,5 +429,7 @@ start_netmode_tools() {
 stop_netmode_tools() {
 	killall -9 netmode-discover >/dev/null 2>&1
 	killall -9 wificontrol >/dev/null 2>&1
+	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
+	ulcpid=$(ps | grep "ubus listen client" | grep -v grep | awk '{print$1}')
+	kill -SIGKILL $ulcpid >/dev/null 2>&1
 }
-

netmode/files/sbin/netmode-client-detect

@@ -19,7 +19,7 @@ timed_check() {
 	done
 }
 
-is_known_macaddr()
+is_inteno_macaddr()
 {
 	macaddr=$1
 
@@ -50,8 +50,8 @@ while true ; do
 		json_get_var ipaddr ipaddr
 		json_get_var network network "lan"
 
-		if is_known_macaddr $macaddr; then
-			logger -s -p user.info -t $0 "netmode-client-detect: a new known device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
+		if is_inteno_macaddr $macaddr; then
+			echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
 			ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
 			/sbin/wificontrol --router --destination $ipaddr
 		fi

netmode/files/sbin/testnet

@@ -49,7 +49,7 @@ ping_uplink()
 	if [ "$hasmode" == "1" ] && [ "$hasip" == "0" -o "$hasdev" == "0" ]; then
 		rv=0
 	elif [ "$hasmode" == "1" ]; then
-		arping -f -q -c1 -w3 -I $device $ipaddr
+		arping -f -q -c2 -w5 -I $device $ipaddr
 		[ $? -eq 1 ] && rv=0 || rv=1
 
 		if [ "$rv" == "0" ]; then
@@ -70,13 +70,13 @@ ping_uplink()
 		wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
 		# If there is an uplink IP address but no connection for 5 minutes, reboot
 		if [ $enableCounter -gt 32 ]; then
-			logger -s -p user.info -t "testnet" "No uplink connection; reboot" >/dev/console
+			logger -t "testnet" "No uplink connection; reboot"
 			ubus call led.internet  set '{"state" : "error"}'
 			reboot &
 		elif [ $((enableCounter % 8)) -eq 0 -a $enableCounter -ge 8 -o $enableCounter -eq 0 ]; then
 			ps | grep -v grep | grep -q 'wifi reload\|wifi import\|wifi.credentials\|iwpriv' && return
 
-			logger -s -p user.info -t "testnet" "No uplink connection; try to re-connect" >/dev/console
+			logger -t "testnet" "No uplink connection; try to re-connect"
 
 			if [ -f /usr/sbin/wlctl ]; then
 				assoclist="$(wlctl -i $wetif assoclist | head -1 | awk '{print$2}')"
@@ -119,7 +119,7 @@ ping_uplink()
 		AccessPolicy=1
 		if [ -f /usr/sbin/iwpriv ]; then
 			grep -q up /sys/class/net/$ETHWAN/operstate 2>/dev/null || {
-				logger -s -p user.info -t "testnet" "Disconnect all stations and disable WiFi access on downlink wireless interfaces" >/dev/console
+				logger -t "testnet" "Disconnect all stations and disable WiFi access on downlink wireless interfaces"
 				# Do not allow clients to connect on 2.4GHz radio
 				iwpriv ra0 set AccessPolicy=$AccessPolicy
 				# Do not allow clients to connect on 5GHz radio
@@ -131,7 +131,7 @@ ping_uplink()
 			}
 		fi
 	else
-		grep -q "true" /tmp/internet_connection_status 2>/dev/null || logger -s -p user.info -t "testnet" "Uplink connection is gained" >/dev/console
+		grep -q "true" /tmp/internet_connection_status 2>/dev/null || logger -t "testnet" "Uplink connection is gained"
 		echo "{ \"online\" : true }" > /tmp/internet_connection_status
 		leden="$(uci -q get leds.internet.enable)"
 		[ "$leden" == "1" ] && ubus call led.internet  set '{"state" : "eok"}'
@@ -146,7 +146,7 @@ ping_uplink()
 		AccessPolicy=0
 
 		if [ -f /usr/sbin/iwpriv ]; then
-			logger -s -p user.info -t "testnet" "Enable WiFi access on downlink wireless interfaces" >/dev/console
+			logger -t "testnet" "Enable WiFi access on downlink wireless interfaces"
 			iwpriv ra0 set AccessPolicy=$AccessPolicy
 			iwpriv rai0 set AccessPolicy=$AccessPolicy
 		fi
@@ -205,21 +205,19 @@ internet_test() {
 	fi
 }
 
-iptv_test() {
+iptvtest() {
+	ubus list led.ext >/dev/null 2>&1 && TVCON=1 || return
+
 	local dest="$(uci -q get system.@system[0].tvping_addr)"
 
-	[ -n "$dest" ] || return
-
-	ubus list led.ext >/dev/null 2>&1 || return
-
 	test_connection $dest
 
 	if [ "$?" -eq 0 ]; then
 		TVCON=1
-		ubus call led.ext set '{"state" : "ok"}'
+		[ -n "$dest" ] && ubus call led.ext  set '{"state" : "ok"}'
 	else
 		TVCON=0
-		ubus call led.ext set '{"state" : "off"}'
+		[ -n "$dest" ] && ubus call led.ext  set '{"state" : "off"}'
 	fi
 }
 
@@ -252,8 +250,6 @@ connectivity_test() {
 		[ "$CURSTATUS" == "$LASTSTATUS" ] || ubus send internet '{"status" : "offline"}'
 		LASTSTATUS=0
 	fi
-
-	iptv_test
 }
 
 if [ "$1" == "once" ]; then

owsd/Makefile

@@ -1,5 +1,8 @@
 #
-# Copyright (C) 2018 Inteno
+# Copyright (C) 2016 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
@@ -10,7 +13,7 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
+PKG_SOURCE_VERSION:=01a3dfce002514d18b7d3d0cb6b77e9edddc819a
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>

owsd/files/owsd.config

@@ -11,7 +11,6 @@ config ubusproxy 'ubusproxy'
 #	list peer 'wss://192.168.1.101/'
 #	list object 'router.*'
 #	list object 'system'
-#	option prefix 'ip' # 'ip' or 'mac'
 #	option peer_cert '/etc/ssl/certs/owsd-repeater-control-cert.pem'
 #	option peer_key '/etc/ssl/private/owsd-repeater-control-key.pem'
 #	option peer_ca '/etc/ssl/certs/owsd-server-ca.pem'

owsd/files/owsd.init

@@ -110,7 +110,6 @@ validate_owsd_ubusproxy() {
 		'enable:bool:1' \
 		'peer:list(string)' \
 		'object:list(string)' \
-		'prefix:string' \
 		'peer_key:file' \
 		'peer_cert:file' \
 		'peer_ca:file' \
@@ -157,7 +156,6 @@ validate_owsd_iface() {
 		'key:file' \
 		'ca:file' \
 		'restrict_to_user:list(string)' \
-		'ubusx_acl:list(string)' \
 		&&
 	[ -n "${port}" ]
 }
@@ -166,7 +164,6 @@ parse_owsd_iface() {
 	local port interface whitelist_interface_as_origin whitelist_dhcp_domains ipv6 ipv6only linklocal
 	local cert key ca
 	local restrict_to_user
-	local ubusx_acl
 
 	validate_owsd_iface "$1" || {
 		echo "Validation failed"
@@ -186,9 +183,6 @@ parse_owsd_iface() {
 		[ -n "${restrict_to_user}" ] && procd_append_param command -u"${restrict_to_user}"
 
 		[ -n "$2" ] && procd_append_param command -i"$2"
-
-		[ -n "${ubusx_acl}" ] && procd_append_param command -X"${ubusx_acl}"
-
 	}
 
 	append_whitelists () {
@@ -291,8 +285,6 @@ start_service() {
 
 		config_list_foreach "ubusproxy" "peer" append_peer
 		config_list_foreach "ubusproxy" "object" append_object
-
-		[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
 	fi
 
 	config_foreach parse_owsd_iface "owsd-listen"

paho-mqtt-c/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=02903ce5b594420331f80c6973fa3635921d7080
+PKG_SOURCE_VERSION:=fe43108d986a02d3a14f079d58bfa666c1089471
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

peripheral_manager/files/sbin/ledctl

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-usage () {
-	echo "Usage: ledctl [normal|test|allon|alloff|production]"
-	exit 1
-}
-
-[ $# -ne 1 ] && usage
-ledstate=$(echo $1 | tr '[A-Z]' '[a-z]')
-
-case $ledstate in
-	normal|test|allon|alloff|production)
-		ubus call leds set  "{\"state\" : \"$ledstate\"}"
-	;;
-	*)
-		usage
-	;;
-esac
-

questd/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=questd
 PKG_VERSION:=3.1.40
 
-PKG_SOURCE_VERSION:=dfbb6b5bb496ed4dda569c836a74e1993dc72501
+PKG_SOURCE_VERSION:=6159b68cc2d3fac70e5eec5555764c81b3b1675a
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -25,8 +25,8 @@ else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 QUESTD_TARGET:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
 QUESTD_TARGET:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-QUESTD_TARGET:=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
+QUESTD_TARGET:=-DIOPSYS_LANTIQ
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 QUESTD_TARGET:=-DIOPSYS_MEDIATEK
 QUESTD_CFLAGS:=\
@@ -43,7 +43,7 @@ export QUESTD_CFLAGS
 
 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +ubus +libpthread +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_ramips:libnl-tiny +libopenssl +TARGET_intel_mips:iwinfo_wave
+	DEPENDS:=+libuci +libubox +ubus +libpthread +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_ramips:libnl-tiny +libopenssl
 	TITLE:=router info daemon
 endef
 
@@ -52,21 +52,15 @@ define Package/questd/description
 	this information via ubus
 endef
 
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-define Build/Configure
-	cp $(PKG_BUILD_DIR)/intel/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Package/questd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
-	#$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/graphd $(1)/sbin/
-	#$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/
-	#$(INSTALL_DIR) $(1)/usr/bin
-	#$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
 endef
 
 $(eval $(call BuildPackage,questd))

samba3/files/samba.config

@@ -1,6 +1,6 @@
 config samba
-        option 'name'		'iopsysSMB'
-        option 'workgroup'	'iopsysSMB'
-        option 'description'	'iopsysSMB'
+        option 'name'		'IntenoSMB'
+        option 'workgroup'	'IntenoSMB'
+        option 'description'	'IntenoSMB'
         option 'homes'		'0'
 

samba3/files/samba.init

@@ -11,6 +11,11 @@ useradd()
 	local password
 	config_get user $1 user
 	config_get password $1 password
+
+	filter="0A;5C 6E"
+	[ "$(hex_filter "$user" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$password" "$filter" 1)" = "" ] || return
+
 	if ! $(grep -rq "^$user:" /etc/passwd) ; then
 		echo "adding user $user"
 		adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
@@ -51,6 +56,29 @@ purgepasswd()
 	done
 }
 
+hex_filter() {
+	local string=$1
+	local hex_chars=$2
+	local wc_max=$3
+	local wc_tot=0
+
+	if [ -z "$string" -o -z "$hex_chars" -o -z "$wc_max" ]
+		then
+		return;
+	fi
+
+	dump=$(echo "$string" | hexdump -v -e '32/1 "%02X ""\n"')
+
+	IFS=';'
+	for i in $hex_chars; do
+		local wc
+		wc=$(echo "$dump" | grep -o "$i" | wc -w)
+		wc_tot=$((wc_tot+wc))
+	done
+
+	[ $wc_tot -gt $wc_max ] && echo "corrupt"
+}
+
 smb_header() {
 	local interface
 	config_get interface $1 interface
@@ -80,11 +108,12 @@ smb_header() {
 	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
 	config_get charset     $1 charset     "UTF-8"
 
-	name=`echo -e "$name" | head -1`
-	workgroup=`echo -e "$workgroup" | head -1`
-	description=`echo -e "$description" | head -1`
-	interfaces=`echo -e "$interfaces" | head -1`
-	charset=`echo -e "$charset" | head -1`
+	filter="0A;5C 6E"
+	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || exit
+	[ "$(hex_filter "$workgroup" "$filter" 1)" = "" ] || exit
+	[ "$(hex_filter "$description" "$filter" 1)" = "" ] || exit
+	[ "$(hex_filter "$interfaces" "$filter" 1)" = "" ] || exit
+	[ "$(hex_filter "$charset" "$filter" 1)" = "" ] || exit
 
 	mkdir -p /var/etc
 	sed -e "s#|NAME|#$name#g" \
@@ -144,13 +173,22 @@ smb_add_share() {
 	path=$(readlink -f $path)
 	[ "${path:0:4}" == "/mnt" ] || path="/mnt/"
 
-	echo -e "\n[$name]\n\tpath = ${path%%\\n*}" >> /var/etc/smb.conf
-	[ -n "$users" ] && echo -e "\tvalid users = $users" | head -1 >> /var/etc/smb.conf
-	[ -n "$read_only" ] && echo -e "\tread only = $read_only" | head -1 >> /var/etc/smb.conf
-	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" | head -1 >> /var/etc/smb.conf
-	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" | head -1 >> /var/etc/smb.conf
-	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" | head -1 >> /var/etc/smb.conf
-	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" | head -1 >> /var/etc/smb.conf
+	filter="0A;5C 6E"
+	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$users" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$read_only" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$guest_ok" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$create_mask" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$dir_mask" "$filter" 1)" = "" ] || return
+	[ "$(hex_filter "$browseable" "$filter" 1)" = "" ] || return
+
+	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
+	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" >> /var/etc/smb.conf
 }
 
 start_service() {