map-controller: 4.5.0.12

the library script that converts uci to mcproxy config is generating
incorrect config for filtering ip addresses which leads to mcproxy
not even starting when multiple filters are defined.

this commit fixes the above described issue.

bbfdm/Config_bbfdm.in

@@ -0,0 +1,177 @@
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
+	default y
+
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255
+
+menu "TR181 Datamodels"
+	depends on PACKAGE_libbbfdm
+
+	config BBF_TR143
+		bool "Enable TR-143 Data Model Support"
+		default y
+
+	config BBF_TR471
+		bool "Enable TR-471 Data Model Support"
+		default y
+
+	config BBFDM_TR181_ATM
+		bool "Include Device.ATM."
+		default y
+
+	config BBFDM_TR181_BRIDGING
+		bool "Include Device.Bridging."
+		default y
+
+	config BBFDM_TR181_DDNS
+		bool "Include Device.DynamicDNS."
+		default y
+
+	config BBFDM_TR181_DEVICEINFO
+		bool "Include Device.DeviceInfo."
+		default y
+
+	config BBFDM_TR181_DEVICEINFO_PROCESSSTATUS
+		bool "Include Device.DeviceInfo.ProcessStatus."
+		default y
+
+	config BBFDM_TR181_DHCPv4
+		bool "Include Device.DHCPv4."
+		default y
+
+	config BBFDM_TR181_DHCPv6
+		bool "Include Device.DHCPv6."
+		default y
+
+	config BBFDM_TR181_DNS
+		bool "Include Device.DNS."
+		default y
+
+	config BBFDM_TR181_DSL
+		bool "Include Device.DSL."
+		default y
+
+	config BBFDM_TR181_ETHERNET
+		bool "Include Device.Ethenet."
+		default y
+
+	config BBFDM_TR181_FAST
+		bool "Include Device.FAST."
+		default y
+
+	config BBFDM_TR181_FIREWALL
+		bool "Include Device.Firewall."
+		default y
+
+	config BBFDM_TR181_GATEWAYINFO
+		bool "Include Device.GatewayInfo."
+		default y
+
+	config BBFDM_TR181_GRE
+		bool "Include Device.GRE."
+		default y
+
+	config BBFDM_TR181_IEEE1905
+		bool "Include Device.IEEE1905."
+		default y
+
+	config BBFDM_TR181_INTERFACESTACK
+		bool "Include Device.InterfaceStack."
+		default y
+
+	config BBFDM_TR181_IP
+		bool "Include Device.IP."
+		default y
+
+	config BBFDM_TR181_LANCONFSEC
+		bool "Include Device.LANonfigSecurity."
+		default y
+
+	config BBFDM_TR181_MQTT
+		bool "Include Device.MQTT."
+		default y
+
+	config BBFDM_TR181_NAT
+		bool "Include Device.NAT."
+		default y
+
+	config BBFDM_TR181_PACKETCAPTURE
+		bool "Include Device.PacketCaptureDiagnostics."
+		default y
+
+	config BBFDM_TR181_PPP
+		bool "Include Device.PPP."
+		default y
+
+	config BBFDM_TR181_PTM
+		bool "Include Device.PTM."
+		default y
+
+	config BBFDM_TR181_QOS
+		bool "Include Device.QoS."
+		default y
+
+	config BBFDM_TR181_ROUTERADVERTISEMENT
+		bool "Include Device.RouterAdvertisement."
+		default y
+
+	config BBFDM_TR181_ROUTING
+		bool "Include Device.Routing."
+		default y
+
+	config BBFDM_TR181_SECURITY
+		bool "Include Device.Security."
+		default y
+
+	config BBFDM_TR181_SELFTEST
+		bool "Include Device.SelfTestDiagnostics."
+		default y
+
+	config BBFDM_TR181_SSH
+		bool "Include Device.SSH."
+		default y
+
+	config BBFDM_TR181_TIME
+		bool "Include Device.Time."
+		default y
+
+	config BBFDM_TR181_UPNP
+		bool "Include Device.UPnP."
+		default y
+
+	config BBFDM_TR181_USB
+		bool "Include Device.USB."
+		default y
+
+	config BBFDM_TR181_USERINTERFACE
+		bool "Include Device.UserInterface."
+		default y
+
+	config BBFDM_TR181_WIFI
+		bool "Include Device.WiFi."
+		default y
+
+	config BBFDM_TR181_WIFI_DATAELEMENTS
+		bool "Include Device.WiFi.DataElements."
+		default y
+
+	config BBFDM_TR181_WIFI_DATAELEMENTS_ASSOCEVENTS
+		bool "Include deprecated AssociationEventData/DisassociationEventData tables"
+		default n
+		help
+		  TR181-2.17 deprecates below dataelements tables
+		  - Device.WiFi.DataElements.AssociationEvent.AssociationEventData.{i}.
+		  - Device.WiFi.DataElements.DisassociationEvent.DisassociationEventData.{i}.
+		  If this option is selected, above mentioned tables shall be added in datamodel.
+
+endmenu

bbfdm/Config_bbfdmd.in

@@ -1,10 +0,0 @@
-if PACKAGE_bbfdmd
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOWRT_EU_"
-
-config BBF_OBFUSCATION_KEY
-	string "Obfuscation key"
-	default "371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04"
-endif

bbfdm/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bbfdm
-PKG_VERSION:=1.17.0
+PKG_VERSION:=1.4.23.28
 
 USE_LOCAL:=0
 ifneq ($(USE_LOCAL),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=a4f61081381a35fc98fa1cec58e964c3e6db2c55
+PKG_SOURCE_VERSION:=0234ae3c860cfdbe5fc5410ae2c34ba1f713fe94
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -19,84 +19,91 @@ endif
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
-RSTRIP:=true
-
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
-include bbfdm.mk
 
 define Package/libbbfdm-api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
   ABI_VERSION:=1.0
 endef
 
-define Package/libbbfdm-ubus
+define Package/libbbfdm/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=BBF datamodel ubus library, provides API to expose datamodel over ubus
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
+	    +BBF_TR471:obudpst
+  MENU:=1
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (default)
+  VARIANT:=default
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  VARIANT:=openssl
+  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  VARIANT:=wolfssl
+  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
 endef
 
 define Package/bbfdmd
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend to expose core tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libopenssl +libbbfdm-ubus +bbf_configmngr
+  TITLE:=Datamodel ubus backend
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
+		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
+		   +PACKAGE_libbbfdm:libbbfdm
 endef
 
-define Package/dm-service
+define Package/userinterface
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend to expose micro-service tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr
+  TITLE:=Package to add Device.UserInterface. datamodel support
 endef
 
-define Package/bbf_configmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:= BBF Config Manager
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json
+define Package/userinterface/description
+  Package to add Device.UserInterface. datamodel support
 endef
 
-define Package/bbfdmd/config
-	source "$(SOURCE)/Config_bbfdmd.in"
-endef
-
-# Below config is a hack to force-recompile dependent micro-services
-define Package/libbbfdm-api/config
-	if PACKAGE_bbfdmd
-		config BBF_LIBBBFDM_VERSION
-			string "Internal config variable to force recompile"
-			default "v${PKG_VERSION}"
-	endif
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
 endef
 
 define Package/libbbfdm-api/description
  Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
 endef
 
-define Package/libbbfdm-ubus/description
- Library contains the APIs to expose data model over ubus
-endef
-
-define Package/bbfdmd/description
- Daemon to expose Datamodel core tree
-endef
-
-define Package/dm-service/description
- Daemon to expose Datamodel micro-service tree
-endef
-
-define Package/bbf_configmngr/description
- Daemon for handling bbf reload services via ubus bbf.config
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR143 data models
 endef
 
 ifeq ($(USE_LOCAL),1)
@@ -106,112 +113,290 @@ endef
 endif
 
 CMAKE_OPTIONS += \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760 \
-	-DCMAKE_BUILD_TYPE:String="Debug" \
+	-DBBF_TR181=ON \
+	-DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
 
 
+ifeq ($(CONFIG_BBFDM_TR181_ATM),y)
+TARGET_CFLAGS += -DBBFDM_TR181_ATM
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_BRIDGING),y)
+TARGET_CFLAGS += -DBBFDM_TR181_BRIDGING
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DDNS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DDNS
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DEVICEINFO),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DEVICEINFO
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DEVICEINFO_PROCESSSTATUS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DEVICEINFO_PROCESSSTATUS
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DHCPv4),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DHCPv4
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DHCPv6),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DHCPv6
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DNS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DNS
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_DSL),y)
+TARGET_CFLAGS += -DBBFDM_TR181_DSL
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_ETHERNET),y)
+TARGET_CFLAGS += -DBBFDM_TR181_ETHERNET
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_FAST),y)
+TARGET_CFLAGS += -DBBFDM_TR181_FAST
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_FIREWALL),y)
+TARGET_CFLAGS += -DBBFDM_TR181_FIREWALL
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_GATEWAYINFO),y)
+TARGET_CFLAGS += -DBBFDM_TR181_GATEWAYINFO
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_GRE),y)
+TARGET_CFLAGS += -DBBFDM_TR181_GRE
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_IEEE1905),y)
+TARGET_CFLAGS += -DBBFDM_TR181_IEEE1905
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_INTERFACESTACK),y)
+TARGET_CFLAGS += -DBBFDM_TR181_INTERFACESTACK
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_IP),y)
+TARGET_CFLAGS += -DBBFDM_TR181_IP
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_LANCONFSEC),y)
+TARGET_CFLAGS += -DBBFDM_TR181_LANCONFSEC
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_MQTT),y)
+TARGET_CFLAGS += -DBBFDM_TR181_MQTT
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_NAT),y)
+TARGET_CFLAGS += -DBBFDM_TR181_NAT
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_PACKETCAPTURE),y)
+TARGET_CFLAGS += -DBBFDM_TR181_PACKETCAPTURE
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_PPP),y)
+TARGET_CFLAGS += -DBBFDM_TR181_PPP
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_PTM),y)
+TARGET_CFLAGS += -DBBFDM_TR181_PTM
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_QOS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_QOS
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_ROUTERADVERTISEMENT),y)
+TARGET_CFLAGS += -DBBFDM_TR181_ROUTERADVERTISEMENT
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_ROUTING),y)
+TARGET_CFLAGS += -DBBFDM_TR181_ROUTING
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_SECURITY),y)
+TARGET_CFLAGS += -DBBFDM_TR181_SECURITY
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_SELFTEST),y)
+TARGET_CFLAGS += -DBBFDM_TR181_SELFTEST
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_SSH),y)
+TARGET_CFLAGS += -DBBFDM_TR181_SSH
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_TIME),y)
+TARGET_CFLAGS += -DBBFDM_TR181_TIME
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_UPNP),y)
+TARGET_CFLAGS += -DBBFDM_TR181_UPNP
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_USB),y)
+TARGET_CFLAGS += -DBBFDM_TR181_USB
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_USERINTERFACE),y)
+TARGET_CFLAGS += -DBBFDM_TR181_USERINTERFACE
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_WIFI),y)
+TARGET_CFLAGS += -DBBFDM_TR181_WIFI
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_WIFI_DATAELEMENTS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_WIFI_DATAELEMENTS
+endif
+
+ifeq ($(CONFIG_BBFDM_TR181_WIFI_DATAELEMENTS_ASSOCEVENTS),y)
+TARGET_CFLAGS += -DBBFDM_TR181_WIFI_DATAELEMENTS_ASSOCEVENTS
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
+endif
+
+ifeq ($(CONFIG_BBF_TR471),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR471=ON
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
+
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(BUILD_VARIANT),default)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
+ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
+CMAKE_OPTIONS += \
+	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
+endif
+
 define Package/libbbfdm-api/install
 	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/libbbfdm-api.so $(1)/lib/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/libbbfdm-api-v2.so $(1)/lib/
-
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
 	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.secure $(1)/usr/libexec/rpcd/bbf.secure
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts/
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_api $(1)/usr/share/bbfdm/scripts/
-
-	$(INSTALL_DIR) $(1)/etc/bbfdm/certificates
-	echo "$(CONFIG_BBF_OBFUSCATION_KEY)" > $(1)/etc/bbfdm/.secure_hash
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/scripts/bbf.config $(1)/usr/libexec/rpcd/bbf.config
 endef
 
-define Package/libbbfdm-ubus/install
+define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-ubus/libbbfdm-ubus.so $(1)/lib/
-endef
-
-define Package/bbfdmd/install
+	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_CONF) ./files/etc/config/schedules $(1)/etc/config/schedules
-
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/bbfdmd
-
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-	
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-	
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/etc/uci-defaults/91-fix-bbfdmd-enabled-option $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/ruleng.bbfdm $(1)/etc/uci-defaults
-
-	$(INSTALL_DIR) $(1)/etc/ruleng
-	$(INSTALL_BIN) ./files/etc/ruleng/bbfdm.json $(1)/etc/ruleng
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
+	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
+	$(INSTALL_BIN) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/97-firewall-service
+	$(INSTALL_BIN) ./files/etc/uci-defaults/99-link-core-plugins $(1)/etc/uci-defaults/99-link-core-plugins
+	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
+	$(INSTALL_BIN) ./files/etc/firewall.service $(1)/etc/firewall.service
+ifeq ($(CONFIG_BBF_TR143),y)
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
+endif
 endef
 
-define Package/dm-service/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdm.services $(1)/etc/init.d/
-
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dm-service/dm-service $(1)/usr/sbin/
-
-	$(BBFDM_REGISTER_SERVICES) -v ${CONFIG_BBF_VENDOR_PREFIX} ./bbfdm_service.json $(1) core
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfdm/libcore.so $(1) core
-endef
-
-define Package/bbf_configmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/bbf_configd $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/bbf_configd
-
-	$(INSTALL_BIN) ./files/etc/init.d/bbf_configd $(1)/etc/init.d/bbf_configd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_config_notify.sh $(1)/usr/share/bbfdm/scripts/
-	$(INSTALL_DATA) ./files/etc/bbfdm/critical_services.json $(1)/etc/bbfdm/
-endef
-
-define Package/bbfdmd/prerm
+define Package/libbbfdm/default/prerm
 	#!/bin/sh
 	rm -rf /etc/bbfdm/dmmap/*
 	exit 0
 endef
 
+define Package/bbfdmd/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
+	$(INSTALL_DATA) ./files/etc/bbfdm/input.json $(1)/etc/bbfdm/
+	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
+	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
+	$(INSTALL_CONF) ./files/etc/config/schedules $(1)/etc/config/schedules
+	$(INSTALL_BIN) ./files/etc/bbfdm/bbfdm_services.sh $(1)/etc/bbfdm/
+	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
+	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_lease_start_time.user $(1)/etc/udhcpc.user.d/udhcpc_lease_start_time.user
+endef
+
+define Package/userinterface/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
+	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
+	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
+	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
+	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
+endef
+
+Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api/legacy
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api/version-2
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-ubus
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/*.h $(1)/usr/include/libbbfdm-api/legacy/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/*.h $(1)/usr/include/libbbfdm-api/version-2/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-ubus/bbfdm-ubus.h $(1)/usr/include/libbbfdm-ubus/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/include/*.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/libbbfdm-api.so $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/libbbfdm-api-v2.so $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-ubus/libbbfdm-ubus.so $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
+	# Work around for backward compatibility
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
 endef
 
-$(eval $(call BuildPackage,bbf_configmngr))
 $(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm-ubus))
+$(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))
 $(eval $(call BuildPackage,bbfdmd))
-$(eval $(call BuildPackage,dm-service))
+
+$(eval $(call BuildPackage,userinterface))

bbfdm/README.md

@@ -1,38 +0,0 @@
-# BBFDM configuration options and utilities
-
-bbfdm provides few compile time configuration options and compile time help utility called [bbfdm.mk](./bbfdm.mk), this document aimed to explain the available usages and best practices.
-
-## Compilation options
-
-|  Configuration option    | Description   | Default Value |
-| -----------------------  | ------------- | ----------- |
-| CONFIG_BBF_VENDOR_LIST   | List of vendor extension directories | iopsys        |
-| CONFIG_BBF_VENDOR_PREFIX | Prefix for Vendor extension datamodel objects/parameters | X_IOPSYS_EU_  |
-| CONFIG_BBF_MAX_OBJECT_INSTANCES | Maximum number of instances per object | 255    |
-| BBF_OBFUSCATION_KEY      | Hash used to encode/decode in `bbf.secure` object | 371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04 |
-
-
-#### BBF_OBFUSCATION_KEY
-
-`bbfdm` provides an ubus object called `bbf.secure` to allow encoding/decoding the values, `bbf.secure` currently support following methods internally to encode/decode
-
-  - Encode/Decode using a predefined SHA512 Hash key
-  - Encode/Decode using a private/public RSA key pair
-
-The `BBF_OBFUSCATION_KEY` compile time configuration option used to defined the SHA512 HASH, if this option is undefined, then it usages a default value as mention in the above table.
-
-User must override this parameter with their own hash value, to generate a hash user can run below command and copy the hash value to this option.
-
-ex: User wants to use 'Sup3rS3cur3Passw0rd' as passkey, then can get the SHA512 sum with
-
-```bash
-$ echo -n "Sup3rS3cur3Passw0rd" | sha512sum
-371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04  -
-```
-
-> Note: Additionally, user can install RSA private key in '/etc/bbfdm/certificates/private_key.pem' path, if private key is present `bbf.secure` shall use rsa private certificate for encrypt/decrypt function. In case of key not present in the pre-defined path, hash will be used for the same.
-
-## Helper utility (bbfdm.mk)
-
-bbfdm provides a helper utility [bbfdm.mk](./bbfdm.mk) to install datamodel plugins in bbfdm core or in microservice directory.
-

bbfdm/bbfdm.mk

@@ -2,91 +2,8 @@
 # Copyright (C) 2023 IOPSYS
 #
 
-BBFDM_BASE_DM_PATH=/usr/share/bbfdm
-BBFDM_INPUT_PATH=/etc/bbfdm/micro_services
-BBFDM_DIR:=$(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
 
-PKG_CONFIG_DEPENDS += CONFIG_BBF_LIBBBFDM_VERSION
-#BBFDM_VERSION:=$(shell grep -oP '(?<=^PKG_VERSION:=).*' ${BBFDM_DIR}/Makefile)
-#BBFDM_TOOLS:=$(BUILD_DIR)/bbfdm-$(BBFDM_VERSION)/tools
-
-# Utility to install the plugin in bbfdm core path with priority.
-# Its now possible to overwrite/remove core datamodel with plugin, so, if some
-# datamodel objects/parameters are present in more than one plugin, order in
-# which they loaded into memory becomes crucial, this Utility help to configure
-# a priority order in which they gets loaded in memory.
-#
-# ARGS:
-#  $1 => Plugin artifact
-#  $2 => package install directory
-#  $3 => Priority of the installed plugin (Optional)
-#
-# Note:
-# - Last loaded plugin gets the highest priority
-#
-# Example:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)
-#
-# Example to install plugin with priority:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1) 01
-#
-BBFDM_INSTALL_CORE_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -p
-
-
-# Utility to install the micro-service datamodel
-# Use Case:
-# user wants to run a datamodel micro-service, it required to install the
-# DotSO/JSON plugin into a bbf shared directory, this utility helps in
-# installing the DotSO/JSON plugin in bbfdm shared directory, and auto-generate
-# input file for the micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - There could be only one main plugin file, so its bind to PKG_NAME
-# - Micro-service input.json will be auto generated with this call
-#
-# Example:
-#  BBFDM_INSTALL_MS_DM $(PKG_BUILD_DIR)/libcwmp.so $(1) $(PKG_NAME)
-#
-BBFDM_INSTALL_MS_DM:=$(BBFDM_DIR)/tools/bbfdm.sh -m
-
-
-# Utility to install a plugins in datamodel micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - Use the service_name/PKG_NAME of the service in which this has to run
-#
-# Example:
-#  BBFDM_INSTALL_MS_PLUGIN $(PKG_BUILD_DIR)/libxmpp.so $(1) icwmp
-#
-BBFDM_INSTALL_MS_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -m -p
-
-# Utility to install the helper scripts in default bbfdm script path
-#
-# Use Case:
-# User want to install some script for running diagnostics
-#
-# ARGS:
-#  $1 => Script with complete path
-#  $2 => package install directory
-#
-# Note:
-# - Use with -d option to install script in bbf.diag directory
-#
-# Example:
-#  BBFDM_INSTALL_SCRIPT $(PKG_BUILD_DIR)/download $(1)
-#  BBFDM_INSTALL_SCRIPT -d $(PKG_BUILD_DIR)/ipping $(1)
-#
-BBFDM_INSTALL_SCRIPT:=$(BBFDM_DIR)/tools/bbfdm.sh -s
-
-
-BBFDM_REGISTER_SERVICES:=$(BBFDM_DIR)/tools/bbfdm.sh -t
+define BbfdmInstallPlugin
+	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
+	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/plugins/
+endef

bbfdm/bbfdm_service.json

@@ -1,54 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "core",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "LANConfigSecurity"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Schedules"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Security",
-        "proto": "cwmp"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "PacketCaptureDiagnostics"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "SelfTestDiagnostics"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Syslog"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "{BBF_VENDOR_PREFIX}OpenVPN",
-        "proto": "usp"
-      },	  
-      {
-        "parent_dm": "Device.",
-        "object": "RootDataModelVersion"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Reboot()"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "FactoryReset()"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bbfdm/files/etc/bbfdm/bbfdm_services.sh

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+BBFDMD="/usr/sbin/bbfdmd"
+
+bbfdm_add_service()
+{
+	local name path
+
+	name="${1}"
+	path="${2}"
+
+	if [ -z "${name}" -o -z "$path" ]; then
+		return 0;
+	fi
+
+	ubus call service add "{'name':'bbfdm.services','instances':{'$name':{'command':['$BBFDMD','-m','$path']}}}"
+}
+
+bbfdm_stop_service()
+{
+	local name
+
+	name="${1}"
+	if [ -z "${name}" ]; then
+		return 0;
+	fi
+
+	if ubus call service list '{"name":"bbfdm.services"}' |grep -q "bbfdm.$name"; then
+		ubus call service delete "{'name':'bbfdm.services','instance':'bbfdm.$name'}"
+	fi
+}
+
+usages()
+{
+	echo "Usages $0: <OPTIONS>..."
+	echo
+	echo "    -h    show help"
+	echo "    -k    micro-service name to stop"
+	echo
+}
+
+while getopts "s:k:h" opts; do
+	case "$opts" in
+		h) usages; exit 0;;
+		k) bbfdm_stop_service "${OPTARG}";;
+	esac
+done

bbfdm/files/etc/bbfdm/critical_services.json

@@ -1,23 +0,0 @@
-{
-	"usp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"time",
-			"wireless",
-			"ieee1905",
-			"mapcontroller",
-			"mosquitto",
-			"nginx",
-			"netmode"
-	],
-	"cwmp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"mapcontroller",
-			"wireless",
-			"time",
-			"netmode"
-	]
-}

bbfdm/files/etc/bbfdm/input.json

@@ -0,0 +1,28 @@
+{
+        "daemon": {
+                "config": {
+                },
+                "input": {
+                        "type": "DotSo",
+                        "name": "/lib/libbbfdm.so",
+                        "plugin_dir": "/etc/bbfdm/plugins"
+                },
+                "output": {
+                        "type": "UBUS",
+                        "name": "bbfdm"
+                }
+        },
+        "cli": {
+                "config": {
+                        "proto": "both",
+                        "instance_mode": 0
+                },
+                "input": {
+                        "type": "UBUS",
+                        "name": "bbfdm"
+                },
+                "output": {
+                        "type": "CLI"
+                }
+        }
+}

bbfdm/files/etc/config/bbfdm

@@ -1,12 +1,8 @@
+
 config bbfdmd 'bbfdmd'
-	option enable '1'
-	option debug '0'
-	option loglevel '3'
+	option enabled '1'
+	option loglevel '1'
+	option refresh_time '120'
+	option transaction_timeout '30'
+	option subprocess_level '2'
 
-config micro_services 'micro_services'
-	option enable '1'
-	option enable_core '0'
-
-
-config reload_handler 'reload_handler'
-	option log_level '1'

bbfdm/files/etc/firewall.portmap

@@ -3,17 +3,17 @@
 . /lib/functions.sh
 
 reorder_dnat_rules() {
-	nat_chains=$(iptables -w -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
+	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
 
 	for chain in ${nat_chains}; do
 		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -w -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
+		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
 
 		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -w -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
+		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
 
 		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -w -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
+		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
 
 		# Skip this chain if no matching rules were found
 		[ -n "${EMPTY_HOST_PORT}" -o -n "${EMPTY_HOST}" -o -n "${EMPTY_PORT}" ] || continue

bbfdm/files/etc/firewall.service

@@ -2,8 +2,6 @@
 
 . /lib/functions.sh
 
-ZONE_NAME_FILE="/tmp/service_fw_zone"
-
 log() {
 	echo "${@}"|logger -t firewall.service -p info
 }
@@ -19,37 +17,6 @@ exec_cmd() {
 	return 0
 }
 
-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_foreach collect_zone_name zone
-}
-
-get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
-}
-
 add_iptable_rule() {
 	chain_name=$1
 	protocol=$2
@@ -168,14 +135,9 @@ add_service() {
 	fi
 
 	action=$(echo "${target}" | tr a-z A-Z)
-	zone_name="$(get_firewall_zone ${interface})"
-	if [ -z "${zone_name}" ]; then
-		log "Rule can not be added without zone name for interface ${interface}"
-		return
-	fi
-
-	chain_name="zone_${zone_name}_input"
+	chain_name="zone_${interface}_input"
 	res=0
+
 	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
 
 	if [ "${count}" -eq 0 ]; then
@@ -198,9 +160,4 @@ add_service() {
 }
 
 config_load firewall
-
-load_zone_names
-
 config_foreach add_service "service"
-
-rm -f "${ZONE_NAME_FILE}"

bbfdm/files/etc/firewall.userinterface

@@ -3,7 +3,6 @@
 . /lib/functions.sh
 
 IDENTIFIER="UI-REMOTE-ACCESS-WAN"
-ZONE_NAME_FILE="/tmp/ui_fw_zone"
 
 log() {
 	echo "${@}"|logger -t firewall.userinterface -p info
@@ -19,41 +18,9 @@ exec_cmd() {
 	fi
 }
 
-collect_zone_name() {
-	local name network
-
-	config_get name "${1}" name ""
-	if [ -z "${name}" ]; then
-		return
-	fi
-
-	config_get network "${1}" network ""
-	for i in ${network}; do
-		var="${i}_zone"
-		echo "${var}=${name}" >> "${ZONE_NAME_FILE}"
-	done
-}
-
-load_zone_names() {
-	rm -f "${ZONE_NAME_FILE}"
-	config_load firewall
-	config_foreach collect_zone_name zone
-}
-
-get_firewall_zone() {
-	if [ ! -f "${ZONE_NAME_FILE}" ]; then
-		echo ""
-		return
-	fi
-
-	var="${1}_zone="
-	name="$(cat ${ZONE_NAME_FILE} | grep ${var} | head -n 1 | cut -d'=' -f 2)"
-	echo "${name}"
-}
-
 delete_ui_firewall_rules() {
-	input_chains=$(iptables -w 1 -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output_chains=$(iptables -w 1 -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
+	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
+	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
 
 	for chain in ${input_chains}; do
 		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
@@ -75,8 +42,8 @@ delete_ui_firewall_rules() {
 		done
 	done
 
-	input6_chains=$(ip6tables -w 1 -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output6_chains=$(ip6tables -w 1 -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
+	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
+	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
 
 	for chain in ${input6_chains}; do
 		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
@@ -104,41 +71,43 @@ configure_ui_firewall_rule() {
 	local enabled access interface
 	local port=""
 
-	config_get_bool enabled "${sec}" enable '1'
-	config_get access "${sec}" access ""
-	config_get interface "${sec}" interface ""
-	config_get port "${sec}" port ""
+	config_get_bool enabled "${sec}" uci_enable '1'
+	config_get access "${sec}" uci_access ""
+	config_get interface "${sec}" uci_interface ""
 
 	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
+		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
+		for item in ${port_list}; do
+			if [ -z "${item##[0-9]*}" ]; then
+				port="${item}"
+				break
+			fi
+		done
+
 		if [ -z "${port}" ]; then
 			return 0
 		fi
 
-		zone_name="$(get_firewall_zone ${interface})"
-		if [ -z "${zone_name}" ]; then
-			return 0
+		zone="zone_${interface}_input"
+		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+		if [ "$?" -eq 0 ]; then
+			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
 		fi
 
-		chain="zone_${zone_name}_input"
-		iptables -w 1 -t filter -nL ${chain} 2>/dev/null 1>&2
+		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
 		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${chain}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
 		fi
 
-		ip6tables -w 1 -t filter -nL ${chain} 2>/dev/null 1>&2
+		zone="zone_${interface}_output"
+		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
 		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${chain}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
 		fi
 
-		chain="zone_${zone_name}_output"
-		iptables -w 1 -t filter -nL "${chain}" 2>/dev/null 1>&2
+		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
 		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${chain}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL "${chain}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${chain}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
 		fi
 	fi
 }
@@ -146,14 +115,11 @@ configure_ui_firewall_rule() {
 # Delete existing remote access rules
 delete_ui_firewall_rules
 
-load_zone_names
-
 config_load userinterface
 config_get_bool serv_enable global enable 1
 
 if [ "${serv_enable}" -eq "1" ]; then
+	config_load nginx
 	# Configure the User Interface rule
-	config_foreach configure_ui_firewall_rule http_access
+	config_foreach configure_ui_firewall_rule server
 fi
-
-rm -f "${ZONE_NAME_FILE}"

bbfdm/files/etc/init.d/bbf_configd

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=07
-
-USE_PROCD=1
-PROG=/usr/sbin/bbf_configd
-
-log() {
-	echo "${@}"|logger -t bbf.config -p info
-}
-
-start_service()
-{
-	local log_level
-
-	config_load bbfdm
-	config_get log_level "reload_handler" log_level 2
-
-	procd_open_instance "bbf_configd"
-	procd_set_param command ${PROG}
-	procd_append_param command -l "${log_level}"
-	procd_set_param respawn
-	procd_close_instance "bbf_configd"
-}
-
-service_triggers() {
-	for config_file in /etc/config/*; do
-		config_name=$(basename "$config_file")
-		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh
-	done
-}

bbfdm/files/etc/init.d/bbfdm.services

@@ -1,114 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=60
-STOP=05
-
-USE_PROCD=1
-PROG=/usr/sbin/dm-service
-
-BBFDM_MICROSERVICE_DIR="/etc/bbfdm/services"
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.services -p info
-}
-
-validate_bbfdm_micro_service_section()
-{
-	uci_validate_section bbfdm micro_services "micro_services" \
-		'enable:bool:true' \
-		'enable_core:bool:false'
-}
-
-_add_microservice()
-{
-	local name path loglevel
-	local enable enable_core unified_daemon
-
-	# Check enable from micro-service
-	path="${1}"
-	enable_core="${2}"
-
-	name="$(basename ${path})"
-	name="${name//.json}"
-
-	json_load_file "${path}"
-	json_select daemon
-
-	json_get_var enable enable 1
-	if [ "${enable}" -eq "0" ]; then
-		log "datamodel micro-service ${name} not enabled"
-		return 0
-	fi
-
-	json_get_var unified_daemon unified_daemon 0
-	if [ "${unified_daemon}" -eq "1" ]; then
-		return 0
-	fi
-
-	json_select config
-	json_get_var loglevel loglevel 4
-
-	procd_open_instance "${name}"
-
-	procd_set_param command ${PROG}
-	procd_append_param command -m "${name}"
-	procd_append_param command -l "${loglevel}"
-
-	if [ "${enable_core}" -eq "1" ]; then
-		procd_set_param limits core="unlimited"
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	procd_set_param respawn
-	procd_close_instance "${name}"
-}
-
-configure_bbfdm_micro_services()
-{
-	local enable enable_core
-
-	config_load bbfdm
-	validate_bbfdm_micro_service_section || {
-		log "Validation of micro_service section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq "0" ] && return 0
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		FILES="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/*.json)"
-
-		for file in $FILES;
-		do
-			[ -e "$file" ] || continue
-
-			_add_microservice $file "${enable_core}"
-		done
-	fi
-}
-
-_start_single_service()
-{
-	local service file
-
-	service="${1}"
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		file="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/${service}.json)"
-		[ -e "$file" ] || return
-
-		_add_microservice $file "0"
-	fi
-}
-
-start_service()
-{
-	if [ -n "${1}" ]; then
-		_start_single_service "${1}"
-	else
-		configure_bbfdm_micro_services
-	fi
-}

bbfdm/files/etc/init.d/bbfdmd

@@ -1,12 +1,13 @@
 #!/bin/sh /etc/rc.common
 
-START=97
-STOP=06
+START=65
+STOP=10
 
 USE_PROCD=1
 PROG=/usr/sbin/bbfdmd
 
-. /usr/share/libubox/jshn.sh
+BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
+BBFDM_TEMP_JSON="/tmp/bbfdm/input.json"
 
 log() {
 	echo "${@}"|logger -t bbfdmd.init -p info
@@ -15,39 +16,63 @@ log() {
 validate_bbfdm_bbfdmd_section()
 {
 	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enable:bool:true' \
+		'enabled:bool:true' \
+		'sock:string' \
 		'debug:bool:false' \
-		'loglevel:uinteger:4'
+		'loglevel:uinteger:1' \
+		'refresh_time:uinteger:0' \
+		'transaction_timeout:uinteger:30' \
+		'subprocess_level:uinteger'
 }
 
 configure_bbfdmd()
 {
-	local enable debug
+	local enabled debug sock update
 	local jlog jrefresh jtimeout jlevel
 
+	update=0
 	config_load bbfdm
 	validate_bbfdm_bbfdmd_section || {
 		log "Validation of bbfdmd section failed"
 		return 1;
 	}
 
-	[ "${enable}" -eq 0 ] && return 0
+	[ "${enabled}" -eq 0 ] && return 0
+
+	if [ -f "${BBFDM_JSON_INPUT}" ]; then
+		cat ${BBFDM_JSON_INPUT} |jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} --arg level ${subprocess_level} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran, "subprocess_level": $level}' > ${BBFDM_TEMP_JSON}
+		val="$(jq -r '.daemon.input // empty' ${BBFDM_TEMP_JSON})"
+		if [ -z "${val}" ]; then
+			log "Failed to generate temp input json, uci changes not applied"
+			cp ${BBFDM_JSON_INPUT} ${BBFDM_TEMP_JSON}
+		fi
+	fi
 
 	procd_set_param command ${PROG}
-	procd_append_param command -l "${loglevel}"
-
 	if [ "${debug}" -eq 1 ]; then
 		procd_set_param stdout 1
 		procd_set_param stderr 1
 	fi
+
+	if [ -f "${sock}" ]; then
+		procd_append_param command -s "${sock}"
+	fi
 }
 
 start_service()
 {
+	mkdir -p /tmp/bbfdm
 	procd_open_instance "bbfdm"
 	configure_bbfdmd
 	procd_set_param respawn
 	procd_close_instance "bbfdm"
+
+	ubus call service state '{"name":"bbfdm.services", "spawn":true}'
+}
+
+stop_service()
+{
+	ubus call service state '{"name":"bbfdm.services", "spawn":false}'
 }
 
 service_triggers()

bbfdm/files/etc/init.d/userinterface

@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+
+USE_PROCD=1
+
+start_service() {
+	local enable
+
+	config_load userinterface
+	config_get_bool enable global enable 1
+
+	if [ ! -f "/etc/config/nginx" ]; then
+		return 0
+	fi
+
+	if [ "${enable}" -eq "1" ]; then
+		ubus call service state '{"name":"nginx", "spawn":true}'
+	else
+		ubus call service state '{"name":"nginx", "spawn":false}'
+	fi
+
+	# Inject firewall rules
+	procd_open_instance userinterface
+	/etc/firewall.userinterface
+	procd_close_instance
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "userinterface" "nginx"
+}

bbfdm/files/etc/ruleng/bbfdm.json

@@ -1,66 +0,0 @@
-{
-	"hosts_refresh": {
-		"if" : [
-			{
-				"event": "host"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.hostmngr",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"dhcp_refresh": {
-		"if_operator": "OR",
-		"if" : [
-			{
-				"event": "host"
-			},
-			{
-				"event": "wifi.dataelements.Associated"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.dhcpmngr",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"ieee1905_refresh_add": {
-		"if" : [
-			{
-				"event": "ieee1905.neighbor.add"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.ieee1905",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"ieee1905_refresh_del": {
-		"if" : [
-			{
-				"event": "ieee1905.neighbor.del"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.ieee1905",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	}
-}

bbfdm/files/etc/uci-defaults/91-fix-bbfdmd-enabled-option

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# rename bbfdmd enabled option to enable
-val="$(uci -q get bbfdm.bbfdmd.enabled)"
-if [ -n "${val}" ]; then
-	uci -q set bbfdm.bbfdmd.enabled=""
-	uci -q set bbfdm.bbfdmd.enable="${val}"
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# This deletes the userinterface json plugin if exists in case of upgrade
+if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
+	rm /etc/bbfdm/json/UserInterface.json
+fi
+
+exit 0
+

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -51,6 +51,10 @@ parse_bbfdm_sysctl_conf_file() {
 
 	# Replace the original file with the modified content
 	mv "$tmpfile" "${bbfdm_sysctl_conf}"
+
+	# Apply the changes
+	uci commit network
+	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
 }
 
 parse_bbfdm_sysctl_conf_file

bbfdm/files/etc/uci-defaults/99-link-core-plugins

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+UNIFIED_PATH="/etc/bbfdm/plugins/"
+
+# Link JSON plugins
+for f in `ls -1 /etc/bbfdm/json/*.json`; do
+	echo "# BBFDM JSON plugin ${f} not aligned #"
+	ln -s ${f} "${UNIFIED_PATH}"
+done
+
+# Link DotSo plugins
+for f in `ls -1 /usr/lib/bbfdm/*.so`; do
+	echo "# BBFDM DotSO plugin ${f} not aligned #"
+	ln -s ${f} "${UNIFIED_PATH}"
+done
+
+exit 0
+

bbfdm/files/etc/uci-defaults/ruleng.bbfdm

@@ -1,2 +0,0 @@
-uci -q set ruleng.bbfdm=rule
-uci -q set ruleng.bbfdm.recipe='/etc/ruleng/bbfdm.json'

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -0,0 +1 @@
+/etc/nginx/allow_host_*

bbfdm/tools/bbfdm.sh

@@ -1,203 +0,0 @@
-#!/bin/bash
-
-BBFDM_BASE_DM_PATH="usr/share/bbfdm"
-BBFDM_INPUT_PATH="etc/bbfdm/micro_services"
-INPUT_FILE="0"
-
-MICRO_SERVICE=0
-SCRIPT=0
-DIAG=0
-PLUGIN=0
-DEST=""
-VENDOR_EXTN=""
-TOOLS="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
-SRC=""
-EXTRA_DATA=""
-
-while getopts ":mpsdtv:" opt; do
-	case ${opt} in
-	  m)
-	  	MICRO_SERVICE=1
-		;;
-	  p)
-	  	PLUGIN=1
-		;;
-	  s)
-	  	SCRIPT=1
-		;;
-	  d)
-	  	DIAG=1
-		;;
-	  t)
-	  	INPUT_FILE=1
-		;;
-	  v)
-	  	VENDOR_EXTN=${OPTARG}
-		;;
-	  ?)
-	  	echo "Invalid option: ${OPTARG}"
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-SRC="${1}"
-shift
-DEST="${1}"
-shift
-DATA="${1}"
-shift
-EXTRA_DATA="${1}"
-
-
-install_bin() {
-	if ! install -m0755 ${1} ${2}; then
-		echo "Failed to install bin ${1} => ${2}"
-		exit 1
-	fi
-}
-
-install_dir() {
-	if ! install -d -m0755 ${1}; then
-		echo "Failed to create directory ${1}"
-		exit 1
-	fi
-}
-
-install_data() {
-	if ! install -m0644 ${1} ${2}; then
-		echo "Failed to install ${1} => ${2}"
-		exit 1
-	fi
-}
-
-# Installing datamodel
-bbfdm_install_dm()
-{
-	local src dest minfile
-
-	src="$1"
-	dest="$2"
-	minfile=""
-
-	if [ -z ${src} ] || [ -z "${dest}" ] || [ -z "${TOOLS}" ]; then
-		echo "Invalid input option for install dm $@"
-		exit 1
-	fi
-
-	if [ ! -f "${src}" ]; then
-		echo "File $src does not exists..."
-		exit 1
-	fi
-
-	if [ "${src##*.}" = "json" ]; then
-		echo "Compacting BBFDM JSON file"
-		minfile=$(mktemp)
-		jq -c 'del(..|.description?)' ${src} > ${minfile}
-
-		if [ -n "${VENDOR_EXTN}" ]; then
-			sed -i "s/{BBF_VENDOR_PREFIX}/${VENDOR_EXTN}/g" ${minfile}
-		fi
-
-		src=${minfile}
-		if dpkg -s python3-jsonschema >/dev/null 2>&1; then
-			echo "Verifying bbfdm Datamodel JSON file"
-			if ! ${TOOLS}/validate_plugins.py ${src}; then
-				echo "Validation of the plugin failed ${src}"
-				exit 1
-			fi
-		else
-			echo "## Install python3-jsonschema to verify datamodel plugins"
-		fi
-	fi
-
-	install_bin ${src} ${dest}
-
-	if [ -f "${minfile}" ]; then
-		rm ${minfile}
-	fi
-}
-
-if [ -z "$SRC" ] || [ -z "${DEST}" ] ; then
-	echo "# BBFDM Null value in src[${SRC}], dest[${DEST}]"
-	exit 1
-fi
-
-if [ "${SCRIPT}" -eq "1" ]; then
-	if [ "${DIAG}" -eq "1" ]; then
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag/
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/
-	fi
-	exit 0
-fi
-
-if [ "${INPUT_FILE}" -eq "1" ]; then
-
-	tempfile=""
-	if [ ! -f "${SRC}" ]; then
-		echo "# Datamodel Input file ${SRC} not available"
-		exit 1
-	fi
-
-	if ! cat ${SRC} |jq >/dev/null 2>&1; then
-		echo "# Invalid datamodel json input file"
-		exit 1
-	fi
-
-	service_name="$(cat ${SRC}|jq -r '.daemon.service_name')"
-	if [ -z "${service_name}" ]; then
-		echo "# service_name not defined in service json ...."
-		exit 1
-	fi
-
-	tempfile=$(mktemp)
-	cp ${SRC} ${tempfile}
-	if [ -n "${VENDOR_EXTN}" ]; then
-		sed -i "s/{BBF_VENDOR_PREFIX}/${VENDOR_EXTN}/g" ${tempfile}
-	fi
-
-	install_dir ${DEST}/etc/bbfdm/services
-	install_data ${tempfile} ${DEST}/etc/bbfdm/services/${service_name}.json
-
-	if [ -f "${tempfile}" ]; then
-		rm ${tempfile}
-	fi
-	exit 0
-fi
-
-if [ "${MICRO_SERVICE}" -eq "1" ]; then
-	if [ -z "${DATA}" ]; then
-		echo "# service_name[${DATA}] not provided"
-		exit 1
-	fi
-
-	if [ "${PLUGIN}" -ne "1" ]; then
-		extn="$(basename ${SRC})"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}.${extn##*.}
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}/$(printf "%02d" ${EXTRA_DATA})$(basename ${SRC})
-	fi
-else
-	if [ "${PLUGIN}" -eq "1" ]; then
-		echo "# WARNING: BBFDM_INSTALL_CORE_PLUGIN macro will be deprecated soon. Please use BBFDM_INSTALL_MS_PLUGIN macro instead, specifying 'core' as micro-service name #"
-		priority="${DATA:-0}"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core
-
-		if [ "${priority}" -gt "0" ]; then
-			# install with priority if defined
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core/${priority}_$(basename ${SRC})
-		elif [ "${priority}" -eq "0" ]; then
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core/$(basename ${SRC})
-		else
-			echo "# Priority should be an unsigned integer"
-			exit 1
-		fi
-	fi
-fi
-

bbfdm/tools/validate_plugins.py

@@ -1,333 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright (C) 2024 iopsys Software Solutions AB
-# Author: Amin Ben Romdhane <amin.benromdhane@iopsys.eu>
-
-import sys
-import json
-from jsonschema import validate
-
-JSON_PLUGIN_VERSION = 0
-
-obj_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"cwmp",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-				"uci" : {"type" : "object", "properties" : {
-						"file" : {"type": "string"},
-						"section" : {"type": "object", "properties" : {
-								"type" : {"type": "string"}
-							}
-						},
-						"dmmapfile" : {"type": "string"}
-					}
-				},
-				"ubus" : {"type" : "object", "properties" : {
-						"object" : {"type": "string"},
-						"method" : {"type": "string"},
-						"args" : {"type": "object"},
-						"key" : {"type": "string"}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-obj_schema_v1 = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {
-			"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"}
-								}
-							},
-							"dmmapfile" : {"type": "string"}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-param_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"string",
-				"unsignedInt",
-				"unsignedLong",
-				"int",
-				"long",
-				"boolean",
-				"dateTime",
-				"hexBinary",
-				"base64",
-				"decimal"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus",
-				"procfs",
-				"sysfs",
-				"json",
-				"uci_sec"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"read" : {"type" : "boolean"},
-		"write" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {"type": "object", "properties" : {
-					"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"},
-									"index" : {"type": "string"}
-								}
-							},
-							"option" : {"type": "object", "properties" : {
-									"name" : {"type": "string"}								}
-							}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					},
-					"procfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					},
-					"sysfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"read",
-		"write"
-	]
-}
-
-event_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"event"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}}
-	},
-	"required": [
-		"type",
-		"protocols"
-	]
-}
-
-command_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"command"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"async" : {"type" : "boolean"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"input" : {"type" : "object"},
-		"output" : {"type" : "object"}
-	},
-	"required": [
-		"type",
-		"async",
-		"protocols"
-	]
-}
-
-def print_validate_json_usage():
-    print("Usage: " + sys.argv[0] + " <dm json file>")
-    print("Examples:")
-    print("  - " + sys.argv[0] + " datamodel.json")
-    print("    ==> Validate the json file")
-    print("")
-    exit(1)
-
-def parse_value( key , value ):
-
-    if key.endswith('.') and not key.startswith('Device.'):
-        print(key + " is not a valid path")
-        exit(1)
-
-    if key.endswith('.') and (JSON_PLUGIN_VERSION == 1 or JSON_PLUGIN_VERSION == 2):
-        __schema = obj_schema_v1
-    elif key.endswith('.'):
-        __schema = obj_schema
-    elif key.endswith('!'):
-        __schema = event_schema
-    elif key.endswith('()'):
-        __schema = command_schema
-    else:
-        __schema = param_schema
-    
-    validate(instance = value, schema = __schema)
-    
-    for k, v in value.items():
-        if k != "list" and k != "mapping" and k != "input" and k != "output" and isinstance(v, dict):
-            parse_value(k, v)
-
-### main ###
-if len(sys.argv) < 2:
-    print_validate_json_usage()
-    
-json_file = open(sys.argv[1], "r", encoding='utf-8')
-try:
-    json_data = json.loads(json_file.read())
-except ValueError:
-    print(sys.argv[1] + " file has a wrong JSON format!!!!!")
-    exit(1)
-
-for __key, __value in json_data.items():
-
-    if __key == "json_plugin_version":
-
-        if not isinstance(__value, int) or __value not in [0, 1, 2]:
-            raise ValueError("Invalid value for json_plugin_version")
-
-        JSON_PLUGIN_VERSION = __value
-        continue
-
-    parse_value(__key , __value)
-
-print("JSON File is Valid")

blkpg-part/Makefile

@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# Copyright (C) 2025 IOPSYS Software Solutions AB
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=blkpg-part
-PKG_VERSION:=1
-PKG_RELEASE:=1
-PKG_SOURCE_VERSION:=5a4ec5f53ed904b37fba03f3797fbe2af3077f8d
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/gportay/blkpg-part.git
-PKG_MIRROR_HASH:=skip
-
-PKG_MAINTAINER:=Andreas Gnau <andreas.gnau@iopsys.eu>
-PKG_LICENSE:=LGPL-2.1-or-later
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-MAKE_INSTALL_FLAGS += PREFIX=/usr
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Disc
-  TITLE:=User space partition table and disk geometry handling utility
-  URL:=https://www.portay.io/blkpg-part/
-endef
-
-define Package/$(PKG_NAME)/description
-  blkpg-part creates temporary partitions that are not part of the GPT/MBR.
-  It makes a partition block device from any consecutive blocks that are
-  not partitioned. It creates, resizes and deletes partitions on the fly
-  without writing back the changes to the partition table.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/blkpg-part $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bridgemngr/Config.in

@@ -1,17 +0,0 @@
-if PACKAGE_bridgemngr
-
-config BRIDGEMNGR_BRIDGE_VLAN
-	bool "Use bridge-vlan backend"
-	help
-	   Set this option to use bridge-vlan as backend for VLAN objects.
-
-config BRIDGEMNGR_BRIDGE_VENDOR_EXT
-	bool "Use bridge BBF vendor extensions"
-	default y
-	help
-	   Set this option to use bridge BBF vendor extensions.
-
-config BRIDGEMNGR_BRIDGE_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-endif

bridgemngr/Makefile

@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2020-2024 iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bridgemngr
-PKG_VERSION:=1.1.1
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
-PKG_SOURCE_VERSION:=b6a657e1c83b49f09323b4012ef229c604b82854
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-define Package/bridgemngr
- CATEGORY:=Utilities
- TITLE:=Bridge Manager
- DEPENDS:=+libuci +libubox +libubus +libblobmsg-json
- DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-endef
-
-define Package/bridgemngr/description
-	Package to add Device.Bridging. data model support.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_PREFIX),"")
-VENDOR_PREFIX = $(CONFIG_BBF_VENDOR_PREFIX)
-else
-VENDOR_PREFIX = $(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_PREFIX)
-endif
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(VENDOR_PREFIX)\\\"
-
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VLAN),y)
-	TARGET_CFLAGS += -DBRIDGE_VLAN_BACKEND
-endif
-
-define Package/bridgemngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libbridgemngr.so $(1) $(PKG_NAME)
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_EXT), y)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/src/libbridgeext.so $(1) $(PKG_NAME) 10
-	$(BBFDM_INSTALL_MS_PLUGIN) -v ${VENDOR_PREFIX} ./files/VLAN_Filtering_Extension.json $(1) $(PKG_NAME) 11
-endif
-
-	$(INSTALL_BIN) ./files/etc/init.d/bridging $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/bridging $(1)/etc/config/
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) ~/git/bridgemngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,bridgemngr))

bridgemngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "bridgemngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "Bridging"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bridgemngr/files/VLAN_Filtering_Extension.json

@@ -1,31 +0,0 @@
-{
-	"json_plugin_version": 2,
-	"Device.Bridging.Bridge.{i}.": {
-		"type": "object",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": true,
-		"array": true,
-		"{BBF_VENDOR_PREFIX}VLANFiltering": {
-			"type": "boolean",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"datatype": "boolean",
-			"description": "Enable or disable VLAN Filtering on this bridge.",
-			"mapping": [
-				{
-					"data": "@Parent",
-					"type": "uci_sec",
-					"key": "vlan_filtering"
-				}
-			]
-		}
-	}
-}
-

bridgemngr/files/etc/config/bridging

@@ -1,33 +0,0 @@
-#L2 filter UCI file
-
-config chain 'qos_output'
-	option target 'qos_output'
-	option table 'nat'
-	option chain 'OUTPUT'
-	option policy 'RETURN'
-
-config chain 'dscp2pbits'
-	option target 'dscp2pbits'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-
-config chain 'qos'
-	option target 'qos'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-
-config chain 'prevlanxlate'
-	option target 'prevlanxlate'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-	option append 'false'
-
-config chain 'mcsnooping'
-	option target 'mcsnooping'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-	option append 'false'

bridgemngr/files/etc/init.d/bridging

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-# Start after bdmf shell, wanconf, and switch-script but before the network-script
-START=20
-STOP=10
-
-USE_PROCD=1
-
-. /lib/functions.sh
-
-handle_ebtables_chain() {
-	local sid="$1"
-	local table
-	local chain
-	local target
-	local policy
-	local append
-	local enabled
-	local ret
-
-	config_get table "$sid" table filter
-	config_get chain "$sid" chain
-	config_get policy "$sid" policy RETURN
-	config_get target "$sid" target
-	config_get_bool append "$sid" append 1
-	config_get_bool enabled "$sid" enabled 1
-
-	[ "$enabled" = "0" ] && return
-	[ -z "${chain}" -o -z "${target}" ] && return
-
-	if [ "$append" != "0" ]; then
-		append="-A"
-	else
-		append="-I"
-	fi
-
-	ebtables --concurrent -t "$table" -N "$target" -P "$policy" 2> /dev/null
-	ret=$?
-
-	if [ $ret -eq 0 ]; then
-		ebtables --concurrent -t "$table" ${append} "$chain" -j "$target"
-	else
-		ebtables --concurrent -t "$table" -D "$chain" -j "$target"
-		ebtables --concurrent -t "$table" ${append} "$chain" -j "$target"
-	fi
-}
-
-handle_ebtables_rule() {
-	local sid="$1"
-	local table
-	local chain
-	local target
-	local match
-	local value
-	local enabled
-	local ret
-
-	config_get table "$sid" table filter
-	config_get chain "$sid" chain
-	config_get match "$sid" match
-	config_get value "$sid" value
-	config_get target "$sid" target RETURN
-	config_get_bool append "$sid" append 1
-	config_get_bool enabled "$sid" enabled 1
-
-	[ "$enabled" = "0" ] && return
-	[ -z "${chain}" -o -z "${target}" ] && return
-
-	if [ "$append" != "0" ]; then
-		append="-A"
-	else
-		append="-I"
-	fi
-
-	ebtables --concurrent -t "$table" -D "$chain" ${match} -j "$target" ${value} 2> /dev/null
-	ebtables --concurrent -t "$table" ${append} "$chain" ${match} -j "$target" ${value}
-}
-
-start_service() {
-	config_load bridging
-	config_foreach handle_ebtables_chain chain
-	config_foreach handle_ebtables_rule rule
-}
-
-reload_service() {
-	stop
-	start
-}
-
-
-service_triggers() {
-	procd_add_reload_trigger bridging
-}

bulkdata/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.20
+PKG_VERSION:=2.1.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=a5e57962938ca143ede65d92be90b6e9fce66e15
+PKG_SOURCE_VERSION:=f556410b51a2248f11358793f11ae54d3e53e85e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -22,19 +22,13 @@ PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 
-define Package/bulkdata
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+ubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus
-endef
-
-define Package/bulkdata/description
-  BulkData daemon for TR069 with bbfdm backend.
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
 endef
 
 TARGET_CFLAGS += \
@@ -47,15 +41,12 @@ define Build/Prepare
 endef
 endif
 
-define Package/bulkdata/install
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/config/bulkdata $(1)/etc/config/
-	$(INSTALL_BIN) ./files/etc/init.d/bulkdatad $(1)/etc/init.d/
-
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/	
+	$(INSTALL_DIR) $(1)/etc/bulkdata
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bulkdata
+	$(CP) ./files/* $(1)/
 endef
 
-$(eval $(call BuildPackage,bulkdata))
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/bbfdm_service.json

@@ -1,17 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "bulkdata",
-    "unified_daemon": true,
-    "proto": "cwmp",
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "BulkData"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bulkdata/files/etc/bulkdata/input.json

@@ -0,0 +1,15 @@
+{
+	"daemon": {
+		"input": {
+			"type": "JSON",
+			"name": "/etc/bulkdata/bulkdata.json"
+		},
+		"output": {
+			"type": "UBUS",
+			"name": "bbfdm.bulkdata",
+			"parent_dm": "Device.",
+			"object": "BulkData",
+			"root_obj": "bbfdm"
+		}
+	}
+}

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,6 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: As per syslog 0-7, default 6=>LOG_INFO
-	option loglevel '3'
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	option log_level '3'
 

bulkdata/files/etc/init.d/bulkdatad

@@ -3,39 +3,34 @@
 START=60
 STOP=10
 
+. /etc/bbfdm/bbfdm_services.sh
+
 USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
-
-validate_global_section() {
-	uci_validate_section bulkdata bulkdata bulkdata \
-	    'enable:bool:1' \
-	    'loglevel:uinteger:3'
-}
+BULKDATA_JSON_INPUT="/etc/bulkdata/input.json"
 
 start_service() {
-	local enable loglevel
+	local enable
 
-	validate_global_section
+	config_load bulkdata
+	config_get_bool enable bulkdata enable 1
 
-	procd_open_instance "bulkdata"
-	procd_set_param command "$PROG"
-	procd_append_param command -l ${loglevel}
-	procd_set_param respawn
-	procd_close_instance "bulkdata"
+	[ "$enable" -eq "1" ] && {
+		procd_open_instance "bulkdata"
+		procd_set_param command "$PROG"
+		procd_set_param respawn
+		procd_close_instance "bulkdata"
+	}
+
+	bbfdm_add_service "bbfdm.bulkdata" "${BULKDATA_JSON_INPUT}"
 }
 
 reload_service() {
-	ret=$(ubus call service list '{"name":"bulkdatad"}' | jsonfilter -qe '@.bulkdatad.instances.bulkdata.running')
-	if [ "$ret" != "true" ]; then
-		stop
-		start
-	else
-		ubus send bulkdata.reload
-	fi
-
-	return 0
+	stop
+	start 
 }
 
-service_triggers() {
+service_triggers()
+{
 	procd_add_reload_trigger bulkdata
 }

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get "${config}"."${default_name}"_${count} >/dev/null
+		if [ "$?" -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata."${section}".profile_name="${profile_name}"
+	uci -q set bulkdata."${section}".profile_id=""
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata."${section}".profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

capiagent/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=capiagent
-PKG_VERSION:=2.1.1
+PKG_VERSION:=2.1.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=136cab3a9f1eec0132db9fa3f7bb1c8748ce1449
+PKG_SOURCE_VERSION:=3e671db8f567b19c109fc13b25bc571c4c73a962
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/capiagent.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -31,7 +31,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/capiagent
   TITLE+= capiagent (daemon implementing Wi-Fi Alliance's CAPI commands)
   DEPENDS= +libubox +libuci +libubus +libnl-genl +libeasy +libwifi \
-	   +libjson-c +libblobmsg-json +ubus +libieee1905 +libwifiutils
+	   +libjson-c +libblobmsg-json +ubus +libieee1905
 endef
 
 define Package/capiagent/description

cmph/Makefile

@@ -1,52 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=cmph
-PKG_VERSION:=2.0.2
-PKG_RELEASE:=1
-
-PKG_SOURCE:=cmph-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=@SF/cmph/
-PKG_MD5SUM:=51ec5329b47774d251a96eaaafdb409e
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-PKG_FIXUP:=autoreconf
-
-PKG_LICENSE:=LGPLv2
-PKG_LICENSE_FILES:=LGPL-2
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=C Minimal Perfect Hashing library
-  URL:=https://sourceforge.net/projects/cmph/
-endef
-
-define Package/$(PKG_NAME)/description
-  C Minimal Perfect Hashing (CMPH) library allows the creation of minimal perfect hash functions for large data sets.
-endef
-
-define Build/Configure
-	$(call Build/Configure/Default)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph_time.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph_types.h $(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.a $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.so* $(1)/usr/lib/
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
-

csmngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=csmngr
-PKG_VERSION:=1.0.2
+PKG_VERSION:=1.0.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5e50fe388fff29b08d895c1c580152cccfa290ad
+PKG_SOURCE_VERSION:=92c62f8df86066bd1718a6a6036195b113e74032
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/csmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

ddnsmngr/Config.in

@@ -1,16 +0,0 @@
-if PACKAGE_ddnsmngr
-choice
-	prompt "Select backend for dynamic DNS management"
-	default DDNSMNGR_BACKEND_DDNSSCRIPT
-	depends on PACKAGE_ddnsmngr
-	help
-		Select which package to use for dynamic DNS support
-
-config DDNSMNGR_BACKEND_DDNSSCRIPT
-	bool "Use ddns_script"
-
-config DDNSMNGR_BACKEND_INADYN
-	bool "Use inadyn"
-
-endchoice
-endif

ddnsmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.12
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=44af9a7b3fec3929f8554af9633a5b8068189b48
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-PKG_CONFIG_DEPENDS:=CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT CONFIG_DDNSMNGR_BACKEND_INADYN
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Dynamic DNS manager
-  DEPENDS:=+DDNSMNGR_BACKEND_DDNSSCRIPT:ddns-scripts +DDNSMNGR_BACKEND_INADYN:inadyn
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  MENU:=1
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-define Package/$(PKG_NAME)/description
-	Manage dynamic DNS updation and provides Device.DynamicDNS. datamodel object based on TR181-2.16
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/ddnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/ddns
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/servers
-	$(INSTALL_DIR) $(1)/usr/lib/ddnsmngr
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DATA) ./files/etc/config/ddnsmngr $(1)/etc/config/ddnsmngr
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-ddns-config-migrate $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/init.d/ddnsmngr $(1)/etc/init.d/ddnsmngr
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT),y)
-	$(INSTALL_BIN) ./files/usr/lib/ddns_script/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/lib/ddnsmngr/ddnsmngr_updater.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/ddns-script/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_INADYN),y)
-	$(INSTALL_BIN) ./files/usr/lib/inadyn/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/inadyn/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/inadyn/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libddnsmngr.so $(1) $(PKG_NAME)
-endef
-
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

ddnsmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "ddnsmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DynamicDNS"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

ddnsmngr/files/etc/config/ddnsmngr

@@ -1,23 +0,0 @@
-config ddnsmngr 'global'
-	option configfile '/var/run/ddnsmngr/ddnsmngr.json'
-	option ddns_dateformat '%F %R'
-	option ddns_rundir '/var/run/ddnsmngr'
-	option ddns_logdir '/var/log/ddnsmngr'
-	option ddns_loglines '250'
-	option upd_privateip '0'
-	option use_curl '1'
-
-config server 'ddns_server_1'
-	option enabled '1'
-	option service 'dynu.com'
-	option name 'dynu.com'
-
-config server 'ddns_server_2'
-	option enabled '1'
-	option service 'dyndns.org'
-	option name 'dyndns.org'
-
-config server 'ddns_server_3'
-	option enabled '1'
-	option service 'zoneedit.com'
-	option name 'zoneedit.com'

ddnsmngr/files/etc/init.d/ddnsmngr

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=10
-USE_PROCD=1
-
-. /usr/lib/ddnsmngr/ddnsmngr_service.sh
-
-start_service() {
-	start_ddnsmngr_service
-}
-
-stop_service() {
-	stop_ddnsmngr_service
-}
-
-reload_service() {
-	stop
-	sleep 1
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger ddnsmngr
-	add_ddnsmngr_triggers
-}

ddnsmngr/files/etc/uci-defaults/01-ddns-config-migrate

@@ -1,170 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-cl_id=1
-srv_id=1
-
-function get_ddns_config_option() {
-	local val
-
-	val="$(uci -q get ddns.${1}.${2})"
-
-	if [ -z "${val}" ] && [ -n "${3}" ]; then
-		val="${3}"
-	fi
-
-	echo "${val}"
-}
-
-function config_supported_service() {
-	if ! uci -q get ddnsmngr.global >/dev/null 2>&1; then
-		uci -q set ddnsmngr.global="ddnsmngr"
-	fi
-
-	servers=""
-
-	for i in $(find /etc/ddnsmngr/servers/ -name '*.json' | cut -d'/' -f 5 | sed "s/.json//")
-	do
-		if [ -z "${servers}" ]; then
-			servers="${i}"
-		else
-			servers="${servers},${i}"
-		fi
-	done
-
-	uci -q set ddnsmngr.global.supported_services="${servers}"
-}
-
-function migrate_service_section() {
-	client_sec=""
-	enabled="$(get_ddns_config_option ${1} enabled "0")"
-	service_name="$(get_ddns_config_option ${1} service_name)"
-	interface="$(get_ddns_config_option ${1} interface)"
-	ip_network="$(get_ddns_config_option ${1} ip_network)"
-	username="$(get_ddns_config_option ${1} username)"
-	password="$(get_ddns_config_option ${1} password)"
-	lookup_host="$(get_ddns_config_option ${1} lookup_host)"
-	use_ipv6="$(get_ddns_config_option ${1} use_ipv6 "0")"
-	force_ipversion="$(get_ddns_config_option ${1} force_ipversion "0")"
-	use_https="$(get_ddns_config_option ${1} use_https "0")"
-	force_dnstcp="$(get_ddns_config_option ${1} force_dnstcp "0")"
-
-	if [ -z "${service_name}" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# check server file is present in device
-	if [ ! -f "/etc/ddnsmngr/servers/${service_name}.json" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# Check if client section is already added for this service
-	clients=$(uci -q show ddnsmngr | grep "=client")
-	client_count=$(echo "${clients}" | wc -l)
-
-	tmp=0
-	while [ $tmp -lt $client_count ]
-	do
-		mngr_serv="$(uci -q get ddnsmngr.@client[$tmp].service_name)"
-		mngr_intf="$(uci -q get ddnsmngr.@client[$tmp].interface)"
-		mngr_netw="$(uci -q get ddnsmngr.@client[$tmp].ip_network)"
-		mngr_user="$(uci -q get ddnsmngr.@client[$tmp].username)"
-		mngr_ipv6="$(uci -q get ddnsmngr.@client[$tmp].use_ipv6)"
-		mngr_forceip="$(uci -q get ddnsmngr.@client[$tmp].force_ipversion)"
-		mngr_https="$(uci -q get ddnsmngr.@client[$tmp].use_https)"
-		mngr_dnstcp="$(uci -q get ddnsmngr.@client[$tmp].force_dnstcp)"
-
-		[ -z "${mngr_ipv6}" ] && mngr_ipv6="0"
-		[ -z "${mngr_forceip}" ] && mngr_forceip="0"
-		[ -z "${mngr_https}" ] && mngr_https="0"
-		[ -z "${mngr_dnstcp}" ] && mngr_dnstcp="0"
-
-		if [ "${mngr_serv}" == "${service_name}" ] && [ "${mngr_intf}" == "${interface}" ] && \
-		   [ "${mngr_netw}" == "${ip_network}" ] && [ "${mngr_user}" == "${username}" ] && \
-		   [ "${mngr_ipv6}" == "${use_ipv6}" ] && [ "${mngr_forceip}" == "${force_ipversion}" ] && \
-		   [ "${mngr_https}" == "${use_https}" ] && [ "${mngr_dnstcp}" == "${force_dnstcp}" ]; then
-			break
-		fi
-
-		tmp=$(( tmp + 1 ))
-	done
-
-	if [ $tmp -ne $client_count ]; then
-		i=0
-		for client in $clients; do
-			if [ $i -eq $tmp ]; then
-				client_sec="$(echo $client | cut -d'=' -f 1 | cut -d'.' -f 2)"
-				break
-			fi
-			i=$(( i + 1 ))
-		done
-
-		if [ $enabled -eq 1 ]; then
-			uci -q set ddnsmngr."${client_sec}".enabled="1"
-		fi
-	else
-		client_sec=ddns_mig_client_"${cl_id}"
-
-		uci -q set ddnsmngr."${client_sec}"="client"
-		uci -q set ddnsmngr."${client_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${client_sec}".service_name="${service_name}"
-		uci -q set ddnsmngr."${client_sec}".interface="${interface}"
-		uci -q set ddnsmngr."${client_sec}".ip_network="${ip_network}"
-		uci -q set ddnsmngr."${client_sec}".username="${username}"
-		uci -q set ddnsmngr."${client_sec}".password="${password}"
-		uci -q set ddnsmngr."${client_sec}".use_ipv6="${use_ipv6}"
-		uci -q set ddnsmngr."${client_sec}".force_ipversion="${force_ipversion}"
-		uci -q set ddnsmngr."${client_sec}".use_https="${use_https}"
-		uci -q set ddnsmngr."${client_sec}".force_dnstcp="${force_dnstcp}"
-
-		cl_id=$(( cl_id + 1 ))
-
-		# add server section if not added
-		servers=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'")
-		if [ -z "${servers}" ]; then
-			server_sec=ddns_mig_server_"${srv_id}"
-			uci -q set ddnsmngr."${server_sec}"="server"
-			uci -q set ddnsmngr."${server_sec}".enabled="1"
-			uci -q set ddnsmngr."${server_sec}".service="${service_name}"
-			uci -q set ddnsmngr."${server_sec}".name="${service_name}"
-
-			srv_id=$(( srv_id + 1 ))
-		fi
-	fi
-
-
-	# if lookup_host is set then add host section
-	if [ -n "${lookup_host}" ] && [ -n "${client_sec}" ]; then
-		# check number of hosts present for this client
-		host_count=$(uci -q show ddnsmngr | grep "dm_parent=\'${client_sec}\'" | wc -l)
-		host_ix=$(( host_count + 1 ))
-		host_sec="${client_sec}"_host_"${host_ix}"
-
-		uci -q set ddnsmngr."${host_sec}"="host"
-		uci -q set ddnsmngr."${host_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${host_sec}".lookup_host="${lookup_host}"
-		uci -q set ddnsmngr."${host_sec}".dm_parent="${client_sec}"
-	fi
-
-	uci -q delete ddns."${1}"
-}
-
-function migrate_ddns_config() {
-	if [ ! -f "/etc/config/ddnsmngr" ]; then
-		# Create ddnsmngr config file
-		touch /etc/config/ddnsmngr
-	fi
-
-	config_supported_service
-
-	config_load ddns
-	config_foreach migrate_service_section service
-
-	uci -q commit ddns
-	uci -q commit ddnsmngr
-}
-
-migrate_ddns_config

ddnsmngr/files/usr/lib/ddns_script/ddnsmngr_service.sh

@@ -1,169 +0,0 @@
-#! /bin/sh
-
-RUNDIR="/var/run/ddnsmngr"
-LOGDIR="/var/log/ddnsmngr"
-PROG="/usr/lib/ddnsmngr/ddnsmngr_updater.sh"
-CONFIGFILE="/var/run/ddnsmngr/ddnsmngr.json"
-CLIENT_INTFS=""
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion proc_info_file
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return 0
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return 0
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return 0 
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return 0
-	fi
-
-	service_section=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return 0
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	json_add_object
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "proc_info_file" "${1}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_close_object
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return 0
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	run_dir=$(uci -q get ddnsmngr.global.ddns_rundir)
-	log_dir=$(uci -q get ddnsmngr.global.ddns_logdir)
-
-	if [ -n "${run_dir}" ]; then
-		RUNDIR="${run_dir}"
-	fi
-
-	if [ -n "${log_dir}" ]; then
-		LOGDIR="${log_dir}"
-	fi
-
-	mkdir -p "${RUNDIR}"
-	mkdir -p "${LOGDIR}"
-
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	touch "${CONFIGFILE}"
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "Can not create ${CONFIGFILE}, exit"
-		exit 0
-	fi
-
-	json_init
-	json_add_array "services"
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	json_close_array
-	json_dump > "${CONFIGFILE}"
-
-	procd_open_instance ddnsmngr
-	procd_set_param command "$PROG"
-	procd_append_param command -c "${CONFIGFILE}"
-	procd_append_param command -- start
-	procd_close_instance
-}
-
-stop_ddnsmngr_service() {
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "${CONFIGFILE} not found, can't stop services if running any"
-	fi
-
-	"$PROG" -c "${CONFIGFILE}" -- stop
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-		procd_add_interface_trigger "interface.*.down" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

ddnsmngr/files/usr/lib/inadyn/ddnsmngr_service.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-PROG="/usr/sbin/inadyn"
-CONFIGPATH="/tmp/inadyn_config"
-PIDPATH="/etc/inadyn_pid"
-CLIENT_INTFS=""
-CONFIG_FILES=""
-SERVER_PATH="/etc/ddnsmngr/servers"
-
-FORMAT="custom [SECTION] {\n\tusername\t= [USER]\n\tpassword\t= [PWD]\n\tddns-server\t= [SERV]\n\tddns-path\t= [URI]\n\tssl\t\t= [SSL]\n\thostname\t= [NAME]\n\tcheckip-command\t= [CMD]\n\tddns-response\t= [RESPONSES]\n}"
-
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-get_service_data() {
-	local provider="$1"
-	shift
-	local dir="$1"
-	shift
-	local ipv6="$1"
-	shift
-
-	local name data url answer script
-
-	[ $# -ne 2 ] && {
-		return 1
-	}
-
-	[ -f "${dir}/${provider}.json" ] || {
-		eval "$1=\"\""
-		eval "$2=\"\""
-		return 1
-	}
-
-	json_load_file "${dir}/${provider}.json"
-	json_get_var name "name"
-	if [ "$ipv6" -eq "1" ]; then
-		json_select "ipv6"
-	else
-		json_select "ipv4"
-	fi
-	json_get_var data "url"
-	json_get_var answer "answer"
-	json_select ".."
-	json_cleanup
-
-	response=""
-	if [ -n "${answer}" ]; then
-		answer=$(echo "${answer}" | sed 's/|/ /g')
-		for ans in $answer; do
-			if [ -z "${response}" ]; then
-				response="${ans}"
-			else
-				response="${response}, ${ans}"
-			fi
-		done
-		response="{ ${response} }"
-	fi
-
-	eval "$1=\"$data\""
-	eval "$2=\"$response\""
-
-	return 0
-}
-
-generate_inadyn_config() {
-	json_load "${1}"
-	json_get_var service_name service_name
-	json_get_var use_ipv6 use_ipv6
-	json_get_var interface interface
-	json_get_var username username
-	json_get_var password password
-	json_get_var host lookup_host
-	json_get_var conf_file config_file
-	json_get_var conf_dir config_dir
-	json_get_var server_address server_address
-	json_cleanup
-
-	if [ -z "${service_name}" ] || [ -z "${host}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_file}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_dir}" ]; then
-		return 1
-	fi
-
-	# First look into custom path to load the url otherwise default path
-	get_service_data "${service_name}" "${SERVER_PATH}" "${use_ipv6}" server_url server_answer
-
-	if [ -z "${server_url}" ]; then
-		return 1
-	fi
-
-	# Need to pick proto, server address and request uri separately from the url
-	# format http://[server_address]/[update_Request_uri]
-	proto=$(echo $server_url | cut -d':' -f 1)
-	serv=$(echo $server_url | cut -d'/' -f 3 | cut -d'@' -f 2)
-	uri=${server_url#*$serv}
-
-	if [ -z $proto ] || [ -z $serv ] || [ -z $uri ]; then
-		return 1
-	fi
-
-	path=$(echo "$uri" | sed 's/&/\\&/g')
-	update_uri=$(echo $path | sed -e "s#\[DOMAIN\]#%h#g"	-e "s#\[PASSWORD\]#%p#g" \
-				      -e "s#\[USERNAME\]#%u#g"	-e "s#\[IP\]#%i#g")
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	# now get the physical interface name
-	intf=$(ifstatus "${interface}" | jsonfilter -e '@.device')
-	if [ -z "${intf}" ]; then
-		return 1
-	fi
-
-	# command to get ip of the interface
-	if [ "${use_ipv6}" -eq 0 ]; then
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv4-address\\\\\"][0].address'\""
-	else
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv6-address\\\\\"][0].address'\""
-	fi
-
-	if [ "${proto}" = "http" ]; then
-		ssl="false"
-	else
-		ssl="true"
-	fi
-
-	inadyn_ver=$(inadyn -v)
-	user_agent="inadyn/${inadyn_ver}"
-
-	config_file="${conf_dir}/${conf_file}"
-	touch "${config_file}"
-
-	echo "iface = ${intf}" > "${config_file}"
-	echo "period = 600" >> "${config_file}"
-	echo "user-agent = ${user_agent}" >> "${config_file}"
-
-	if [ "${use_ipv6}" -eq 1 ]; then
-		echo "allow-ipv6 = true" >> "${config_file}"
-	fi
-
-	if [ -z "${password}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tpassword\\t= \[PWD\]\\n//g')
-	fi
-
-	if [ -z "${server_answer}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tddns-response\\t= \[RESPONSES\]\\n//g')
-	fi
-
-	config=$(echo $FORMAT | sed -e "s#\[SECTION\]#$conf_file#g"	-e "s#\[PWD\]#$password#g" \
-				    -e "s#\[USER\]#$username#g"	-e "s#\[SERV\]#$serv#g" \
-				    -e "s#\[URI\]#\"$update_uri\"#g"	-e "s#\[SSL\]#$ssl#g" \
-				    -e "s#\[NAME\]#$host#g"	-e "s#\[CMD\]#$get_ip#g" \
-				    -e "s#\[RESPONSES\]#$server_answer#g")
-
-	echo -e "\n\n${config}" >> "${config_file}"
-
-	return 0
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return
-	fi
-
-	service_section=$(uci show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return
-	fi
-
-	json_init
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_add_string "config_file" "${1}"
-	json_add_string "config_dir" "${CONFIGPATH}"
-
-	json_str=$(json_dump)
-	json_cleanup
-
-	generate_inadyn_config "${json_str}"
-
-	if [ "$?" -ne 0 ]; then
-		return
-	fi
-
-	CONFIG_FILES="${CONFIG_FILES} ${1}"
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	mkdir $CONFIGPATH
-	mkdir -p $PIDPATH
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	i=1
-	for conf in $CONFIG_FILES; do
-		instance="ddnsmngr_${i}"
-		i=$(( i + 1 ))
-
-		procd_open_instance $instance
-		procd_set_param command "$PROG"
-		procd_append_param command -f "${CONFIGPATH}/${conf}"
-		procd_append_param command -l debug
-		procd_append_param command -P "${PIDPATH}/${conf}"
-		procd_append_param command -n -C
-		procd_close_instance
-	done
-}
-
-stop_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

decollector/Config.in

@@ -2,6 +2,6 @@ menu "Configuration"
 
 config DECOLLECTOR_EASYMESH_VERSION
 	int "Support Easymesh version"
-	default 6
+	default 4
 
 endmenu

decollector/Makefile

@@ -1,23 +1,22 @@
 #
-# Copyright (C) 2021-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis AB
+# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=decollector
-PKG_VERSION:=6.2.1.7
+PKG_VERSION:=4.2.1.1.5
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ca92325ece080389ffb405c95048b64071eda653
+PKG_SOURCE_VERSION:=b34c94d516ee18e33fc910b8a656649541b7e8e8
 PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 
 PKG_LICENSE:=BSD-3-Clause
@@ -30,7 +29,7 @@ define Package/decollector
   CATEGORY:=Utilities
   TITLE:=WiFi DataElements Collector Proxy
   DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +ieee1905-map-plugin
+	   +libeasy +libwifiutils +libieee1905 +map-plugin
 endef
 
 define Package/decollector/description

dectmngr/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.7.10
+PKG_VERSION:=3.6.5
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1f851980a6ba616df54f79930225f8bcd563b711
+PKG_SOURCE_VERSION:=192e74db2082e3f89f6defe9d752d752b0b09079
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -28,7 +28,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools +voicemngr
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
 endef
 
 define Package/$(PKG_NAME)/description
@@ -56,14 +56,11 @@ endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/dspg
+	$(INSTALL_DIR) $(1)/etc
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
-ifeq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./firmware/common/* $(1)/etc/dspg/
-endif
 	$(CP) ./files/etc/* $(1)/etc/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef

dectmngr/files/etc/config/dect

@@ -1,6 +1,3 @@
 config dect 'global'
-	option log_dect_cmbs 'syslog'
-	option log_level 'realtime,warning,error'
-
-config dect 'base'
-	option enable '1'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -11,24 +11,7 @@ LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
 
-get_extension_shift() {
-   local dect_exts
-
-   get_dect_extension() {
-       local ext=$1
-       local type
-
-       config_get type $ext type
-
-       [ "$type" == "dect" ] && echo $ext
-    }
-
-    config_load "asterisk"
-
-    dect_exts=$(config_foreach get_dect_extension "extension" |sort |head -n1)
-
-    echo "${dect_exts#extension}"
-}
+DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
@@ -57,53 +40,13 @@ get_dcx81_device() {
 			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
 			readonly device="/dev/${device_name_line##DEVNAME=}"
 			[ -c "$device" ] || return 1
-			printf "%s" "$(basename $device)"
+			printf "%s" "$device"
 			return 0
 		fi
 	done
 	return 1
 }
 
-check_dcx81_firmware() {
-	local dcx81_uart=$1
-	local fw_link="/lib/firmware/dcx81_firmware"
-	local fw_file
-
-	[ -L "$fw_link" ] || return
-
-	fw_file=$(readlink -f $fw_link)
-	[ -f "$fw_file" ] || return
-
-	# the symbolic link is not needed
-	rm -f $fw_link
-
-	eval $(/sbin/cmbs_tcx -comname "$dcx81_uart" -fw_version |grep DCX81_FW_Version)
-	[ -n "$DCX81_FW_Version" ] || return
-
-	if echo $(basename $fw_file) | grep -qi "$DCX81_FW_Version" ; then
-		logger -t "$PROG" "DCX81 running expected $DCX81_FW_Version"
-		return;
-	fi
-
-	logger -t "$PROG" "DCX81 firmware upgrading to $fw_file"
-	/sbin/cmbs_tcx -comname "$dcx81_uart" -fwu "$fw_file" 2>&1 >/dev/null &
-
-	echo -n "Updrading DCX81 firmware.." >/dev/console
-	local wait_time=0
-	while pidof cmbs_tcx >/dev/null && [ "$wait_time" -lt "200" ] ; do
-		sleep 5
-		wait_time=$(($wait_time + 5))
-		echo -n "." >/dev/console
-	done
-
-	if pidof cmbs_tcx >/dev/null ; then
-		killall -9 cmbs_tcx
-		logger -t "$PROG" "DCX81 firmware upgrade timeout"
-	else
-		logger -t "$PROG" "DCX81 firmware upgrade done"
-	fi
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
@@ -118,12 +61,10 @@ start_service() {
 	local dcx81_uart_device
 	if ! dcx81_uart_device="$(get_dcx81_device)"; then
 		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device="ttyH0"
+		dcx81_uart_device=/dev/ttyH0
 	fi
 
-	check_dcx81_firmware $dcx81_uart_device
-
-	opt_ext="-extensionShift $(get_extension_shift)"
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -140,27 +81,24 @@ start_service() {
 
 	config_load dect
 	config_get log_dect_cmbs global log_dect_cmbs syslog
-	config_get pcm_slot_start global pcm_slot_start
-	config_get pcm_fsync global pcm_fsync
-
-        [ -n "$pcm_fsync" ] && opt_ext="$opt_ext -sync $pcm_fsync"
-        [ -n "$pcm_slot_start" ] && opt_ext="$opt_ext -slotsShift $pcm_slot_start"
 
 	procd_open_instance
 
+	# dectmngr takes expects device without /dev
+	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
 	case "$log_dect_cmbs" in
 	none)
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
 		rm -f $LOG_PATH/*
 		;;
 	file)
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -log $LOG_PATH/dect-cmbs.log $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
 		;;
 	*)
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -syslog $opt_ext
+		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
 		rm -f $LOG_PATH/*
 		;;
 	esac
@@ -174,6 +112,7 @@ start_service() {
 stop_service() {
 	has_dect || return 0
 
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
 	stop_and_wait_dectmngr
 }
 
@@ -187,6 +126,11 @@ service_triggers() {
 }
 
 boot() {
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
+
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start

dhcpmngr/Makefile

@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dhcpmngr
-PKG_VERSION:=1.0.6
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dhcpmngr.git
-PKG_SOURCE_VERSION:=986f66608959f4f589009d580b046e250d8c620d
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dhcpmngr
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Package to add Device.DHCPv4 and v6 data model support.
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  DEPENDS+=+DNSMNGR_DNS_SD:umdns
-  DEPENDS+=+DNSMNGR_BACKEND_DNSMASQ:dnsmasq
-  DEPENDS+=+DNSMNGR_BACKEND_UNBOUND:odhcpd
-endef
-
-define Package/dhcpmngr/description
-  Package to add Device.DHCPv4. and Device.DHCPv6. data model support.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dhcpmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/dhcpmngr/install
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_lease_start_time.user $(1)/etc/udhcpc.user.d/udhcpc_lease_start_time.user
-ifeq ($(CONFIG_DNSMNGR_BACKEND_UNBOUND),y)
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DATA) ./files/etc/uci-defaults/unbound.odhcpd.uci_default $(1)/etc/uci-defaults/16-set-unbound-as-odhcpd-leasetrigger
-endif
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdhcpmngr.so $(1) $(PKG_NAME)
-endef
-
-$(eval $(call BuildPackage,dhcpmngr))

dhcpmngr/bbfdm_service.json

@@ -1,20 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dhcpmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DHCPv4"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "DHCPv6"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dhcpmngr/files/etc/uci-defaults/unbound.odhcpd.uci_default

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# update odhcpd uci to use unbound's script as leasetrigger
-uci -q get dhcp.odhcpd >/dev/null 2>&1 && {
-	maindhcp="$(uci -q get dhcp.odhcpd.maindhcp)"
-
-	# if odhcpd is the main dhcp
-	[ "$maindhcp" = "1" ] || [ "$maindhcp" = "true" ] || [ "$maindhcp" = "on" ] && {
-		# if unbound daemon and unbound script file is present
-		[ -e /usr/lib/unbound/odhcpd.sh ] && [ -e /usr/sbin/unbound ] && {
-			# then set unbound script as leasetrigger in dhcp UCI
-			uci -q set dhcp.odhcpd.leasetrigger='/usr/lib/unbound/odhcpd.sh'
-		}
-	}
-}
-
-exit 0

dnsmngr/Config.in

@@ -1,30 +0,0 @@
-if PACKAGE_dnsmngr
-
-menu "Configuration"
-
-config DNSMNGR_DNS_SD
-	bool "Include Device.DNS.SD. TR-181 support"
-	default y
-	help
-	   Set this option to include support for TR-181 DNS.SD. object.
-
-choice
-	prompt "Select backend for DNS management"
-	default DNSMNGR_BACKEND_DNSMASQ
-	depends on PACKAGE_dnsmngr
-	help
-		Select which backend daemon to use for DNS
-
-config DNSMNGR_BACKEND_DNSMASQ
-	bool "Use dnsmasq for dns and dhcp"
-	help
-	   Enable this option to use dnsmasq + odhcpd for dns and dhcp.
-
-config DNSMNGR_BACKEND_UNBOUND
-	bool "Use unbound with odhcpd-full for dns and dhcp"
-	help
-	   Enable this option to use unbound + odhcpd for dns and dhcp.
-
-endchoice
-endmenu
-endif

dnsmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2022-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.18
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=80fa147e6f1f0d9c1a62a62a693ff3adaef45363
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dnsmngr
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +odhcpd
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  DEPENDS+=+DNSMNGR_DNS_SD:umdns
-  DEPENDS+=+DNSMNGR_BACKEND_DNSMASQ:dnsmasq
-  DEPENDS+=+DNSMNGR_BACKEND_UNBOUND:unbound-daemon +DNSMNGR_BACKEND_UNBOUND:unbound-control
-  TITLE:=Package to configure DNS backend and TR-181 support
-endef
-
-define Package/dnsmngr/description
-  Package to configure DNS backend and TR-181 support.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(CONFIG_DNSMNGR_DNS_SD),y)
-define Build/Compile
-	$(call Build/Compile/Default,all)
-endef
-else
-define Build/Compile
-	$(call Build/Compile/Default,dns)
-endef
-endif
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-ifeq ($(CONFIG_DNSMNGR_BACKEND_DNSMASQ),y)
-        TARGET_CFLAGS += -DDNSMASQ_BACKEND
-endif
-
-define Package/dnsmngr/install
-	$(INSTALL_DIR) $(1)/etc/umdns
-	$(INSTALL_DIR) $(1)/etc/umdns/tmp
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dnsmngr $(1)/lib/upgrade/keep.d/dnsmngr
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdnsmngr.so $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_SCRIPT) -d $(PKG_BUILD_DIR)/scripts/nslookup $(1)
-ifeq ($(CONFIG_DNSMNGR_DNS_SD),y)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/src/libdns_sd.so $(1) $(PKG_NAME) 10
-endif
-endef
-
-$(eval $(call BuildPackage,dnsmngr))

dnsmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dnsmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DNS"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dnsmngr/files/lib/upgrade/keep.d/dnsmngr

@@ -1 +0,0 @@
-/etc/umdns/*

dslmngr/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.10
+PKG_VERSION:=1.2.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=cb8b8fd2549751bcd38808391b76a1a9a908c4de
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE_VERSION:=8fb4093b4d26b3cb06603e110d424005e33cf5d6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
@@ -26,12 +26,9 @@ PKG_LICENSE_FILES:=LICENSE
 
 
 include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
 
 ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_PLATFORM=BROADCOM
-else ifneq ($(CONFIG_TARGET_airoha),)
-  TARGET_PLATFORM=AIROHA
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -43,7 +40,6 @@ define Package/dslmngr
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
   DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +TARGET_airoha:br2684ctl
 endef
 
 define Package/dslmngr/description
@@ -73,18 +69,12 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/etc/dsl
 	$(CP) ./files/common/* $(1)/
 ifeq ($(CONFIG_TARGET_brcmbca),y)
 	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
 endif
-
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfdsl.so $(1) $(PKG_NAME)
 endef
 
 $(eval $(call BuildPackage,dslmngr))

dslmngr/bbfdm_service.json

@@ -1,28 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dslmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DSL"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "FAST"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "ATM"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "PTM"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dslmngr/files/airoha/etc/init.d/xdsl_wan

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=99
-USE_PROCD=1
-
-start_service() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ -f /etc/board.json ] || return 0
-
-	if [ "$need_xdsl" != "" ]; then
-		procd_open_instance xdsl_wan
-		procd_set_param command /sbin/xdsl_wan
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-boot() {
-	: # boot-up is handled from 'hsm' application
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "dsl"
-}

dslmngr/files/airoha/lib/dsl/airoha.sh

@@ -1,28 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-xtm_remove_devices() {
-	:
-}
-
-xtm_create_devices() {
-	:
-}
-
-xdsl_configure() {
-	# Support bridged WAN interface
-	ebtables --concurrent -t broute -D BROUTING -p 0xbeed -j DROP 2> /dev/null
-	ebtables --concurrent -t broute -I BROUTING -p 0xbeed -j DROP
-}
-
-xdsl_stop() {
-	return 0
-}
-
-xdsl_init() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ "$need_xdsl" = "" ] && exit 0
-
-	echo "Starting DSL"
-}

dslmngr/files/airoha/sbin/xdsl_wan

@@ -1,240 +0,0 @@
-#!/bin/sh
-
-source "/lib/functions.sh"
-source "/lib/functions/network.sh"
-source "/lib/functions/system.sh"
-
-PREVLINK=""
-PREVWANMODE=""
-WANMODE=""
-CONFIGURED=0
-CINDEX=0
-WANPORT="$(jsonfilter -i /etc/board.json -e @.network.wan.device)"
-
-delete_atm_device() {
-	/userfs/bin/blapi_cmd xdsl atm_delete_interface $CINDEX
-	CINDEX=$((CINDEX+1))
-}
-
-delete_atm_devices() {
-	CINDEX=0
-	config_load dsl
-	config_foreach delete_atm_device atm-device
-}
-
-configure_atm_device() {
-	local vpi vci encapsulation qos_class pcr mbs scr
-	local encap qos ethmac
-
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr "0"
-	config_get mbs $1 mbs "0"
-	config_get scr $1 scr "0"
-
-	case $encapsulation in # llc, vcmux
-		vcmux)
-			encap="1483 Bridged IP VC-Mux"
-		;;
-		*)
-			encap="1483 Bridged IP LLC"
-		;;
-
-	esac
-
-	ethmac="$(echo -n "$(macaddr_add 02:AA:BB:01:23:40 $((CINDEX+2)))" | sed 's#:##g')"
-
-	/userfs/bin/blapi_cmd xdsl create_device $CINDEX ATM "" "$ethmac"
-	/userfs/bin/blapi_cmd xdsl atm_create_interface $CINDEX ATM "$qos_class" "$encap" "$vpi" "$vci" "$pcr" "$scr" "$mbs" 0
-
-	CINDEX=$((CINDEX+1))
-}
-
-create_atm_devices() {
-	delete_atm_devices
-
-	CINDEX=0
-	config_foreach configure_atm_device atm-device
-}
-
-configure_line() {
-	local mode profile bitswap sra us0 sesdrop sos ginp mod prof
-	local adsl1_flag=0 issue2_flag=0 Glite_flag=0 adsl2_flag=0 adsl2p_flag=0 vdsl2_flag=0
-	local pro_8a_flag=0 pro_8b_flag=0 pro_8c_flag=0 pro_8d_flag=0 pro_12a_flag=0 pro_12b_flag=0 pro_17a_flag=0 pro_30a_flag=0 pro_35b_flag=0
-
-	config_get mode $1 mode "vdsl2"
-	config_get profile $1 profile "35b"
-	config_get bitswap $1 bitswap "1"
-	config_get sra $1 sra "1"
-	config_get us0 $1 us0 "1"
-	config_get sos $1 sos "0"
-	config_get sos $1 roc "0"
-	config_get sos $1 ginp "0"
-
-	for mod in $mode; do
-		[ "$mod" = "gdmt" ] && adsl1_flag=1
-		[ "$mod" = "glite" ] && Glite_flag=1
-		[ "$mod" = "t1413" ] && issue2_flag=1
-		[ "$mod" = "adsl2" ] && adsl2_flag=1
-		[ "$mod" = "adsl2p" ] && adsl2p_flag=1
-		[ "$mod" = "vdsl2" ] && vdsl2_flag=1
-	done
-
-	for prof in $profile; do
-		[ "$prof" = "8a" ] && pro_8a_flag=1
-		[ "$prof" = "8b" ] && pro_8b_flag=1
-		[ "$prof" = "8c" ] && pro_8c_flag=1
-		[ "$prof" = "8d" ] && pro_8d_flag=1
-		[ "$prof" = "12a" ] && pro_12a_flag=1
-		[ "$prof" = "12b" ] && pro_12b_flag=1
-		[ "$prof" = "17a" ] && pro_17a_flag=1
-		[ "$prof" = "30a" ] && pro_30a_flag=1
-		[ "$prof" = "35b" ] && pro_35b_flag=1
-	done
-
-	/userfs/bin/blapi_cmd xdsl set_adsl_profile "$pro_8a_flag" "$pro_8b_flag" "$pro_8c_flag" "$pro_8d_flag" "$pro_12a_flag" "$pro_12b_flag" "$pro_17a_flag" "$pro_30a_flag" "$pro_35b_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_mode "$adsl1_flag" "$issue2_flag" "$Glite_flag" "$adsl2_flag" "$adsl2p_flag" "$vdsl2_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_ginp "$((!ginp))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sos_roc "$((!sos))" "$((!roc))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_us0 "$((!us0))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sra "$((!sra))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_bitswap "$((!bitswap))"
-
-	CONFIGURED=1
-}
-
-configure_lines() {
-	config_load dsl
-	config_foreach configure_line dsl-line
-}
-
-call_wan_hotplug() {
-	# initializations
-	local updown="$1"
-	local ethwan="$2"
-
-	# ethernet hotlugs expect LINK and PORT environment variables set
-	env -i LINK="$updown" PORT="$ethwan" /sbin/hotplug-call ethernet
-}
-
-if [ "$WANPORT" = "ae_wan" -a -f /proc/device-tree/ae_wan/wan-dsl ]; then
-	/etc/init.d/br2684ctl stop
-else
-	/etc/init.d/br2684ctl start
-fi
-
-# Wait for nas0 interface to come up.
-while [ "$(devstatus "$WANPORT" | jsonfilter -e @.up)" != "true" ]; do
-	sleep 1
-done
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-	[ \( "$LINK" = "down" -o "$LINK" = "up" \) ] && break
-	sleep 1
-done
-sleep 2
-
-/userfs/bin/blapi_cmd xdsl set_adsl_sysvid "26 00 47 4E 58 53 00 00" # GNXS vendor id
-/userfs/bin/blapi_cmd xdsl set_adsl_version "$(ubus call fwbank dump | jsonfilter -e "@.bank[@.active=true].swver" | cut -f1 -d'_' | cut -f1 -d'-' | hexdump -e '11/1 "%02x " "\n"' | head -n1)"
-/userfs/bin/blapi_cmd xdsl set_power_up_down 1
-/userfs/bin/blapi_cmd xdsl set_power_up_down 0
-sleep 1
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-
-	if [ "$LINK" != "$PREVLINK" -a \( "$LINK" = "down" -o "$LINK" = "up" \) ]; then
-		if [ "$LINK" = "down" ]; then
-			[ "$CONFIGURED" -eq 0 ] && configure_lines # Needs to be done once the slave SoC is in down state and we've not been able to auto-sync.
-			if [ -n "$WANMODE" ]; then
-				if [ "$WANMODE" = "PTM" ]; then
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 0 1
-				else
-					delete_atm_devices
-				fi
-			fi
-
-			call_wan_hotplug "down" "$WANPORT"
-		else
-			CONFIGURED=1
-			WANMODE="$(awk '/TPSTC type:/{print $4}' /proc/tc3162/adsl_stats)"
-			if [ "$WANMODE" != "$PREVWANMODE" ]; then
-				OLDWANPORT="$WANPORT"
-				network_defer_device "$OLDWANPORT"
-
-				if [ -f /proc/device-tree/ae_wan/wan-dsl ]; then
-					WANPORT="ae_wan"
-				else
-					WANPORT="nas10"
-				fi
-
-				if [ "$WANMODE" = "PTM" ]; then
-					/etc/init.d/br2684ctl stop
-					delete_atm_devices
-					/userfs/bin/blapi_cmd system set_wan_mode 1
-					/userfs/bin/blapi_cmd xdsl reload_ko 2
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 1 2
-
-					# Set extended TPID for PTM packet flow
-					sys memwl 1FB50000 81001839
-					# VLAN TPID - VLAN
-					sys memwl 1FB50F18 8100
-
-					ifconfig ${WANPORT} mtu 1500
-				else
-					/userfs/bin/blapi_cmd system set_wan_mode 0
-					/userfs/bin/blapi_cmd xdsl reload_ko 1
-					/etc/init.d/br2684ctl start
-
-					# Set extended TPID for ATM packet flow
-					sys memwl 1FB50000 884C1839
-					# VLAN TPID - MPOA
-					sys memwl 1FB50F18 884C
-
-					ifconfig ${WANPORT} mtu 1982
-					ifconfig ${WANPORT} down up
-
-					OLDWANPORT="$WANPORT"
-					ATMINDEX="$(cat /sys/class/atm/TSARM*/atmindex | tail -n1 2> /dev/null)"
-					WANPORT="nas$((ATMINDEX))"
-				fi
-
-				if [ "$OLDWANPORT" != "$WANPORT" ]; then
-					call_wan_hotplug "down" "$OLDWANPORT"
-
-					FILES="$(grep "$OLDWANPORT" /etc/config/* | cut -f1 -d: | uniq | cut -f4 -d/ | xargs)"
-					for FILE in $FILES; do
-						sed -i -e "s#${OLDWANPORT}#${WANPORT}#g" "/etc/config/${FILE}"
-						"/etc/init.d/${FILE}" restart
-					done
-				else
-					/etc/init.d/network restart
-				fi
-				ifconfig ${OLDWANPORT} down up
-			fi
-
-			if [ "$WANMODE" = "PTM" ]; then
-				: # ToDo
-			else
-				create_atm_devices
-			fi
-
-			call_wan_hotplug "up" "$WANPORT"
-			PREVWANMODE="$WANMODE"
-		fi
-
-		# Toggle link state
-		network_defer_device "$WANPORT"
-		network_ready_device "$WANPORT"
-
-		# We are only interested in the transtion from init -> up/down and up/down -> down/up and vice versa.
-		# Since we poll the status via in-band signaling packets might get lost and the /procfs file is empty.
-		# This state we don't want to handle as it will toggle the link and do a re-setup which is totally unnecessary and unwanted.
-		PREVLINK="$LINK"
-	fi
-
-	sleep 5
-done

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -211,8 +211,8 @@ create_ptm_devices() {
 
 prioritize_arp()
 {
-      ebtables --concurrent -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables --concurrent -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
 }
 
 xtm_remove_devices() {

dslmngr/files/common/etc/config/dsl

@@ -25,7 +25,6 @@ config dsl-line line
 	list profile 12b
 	list profile 17a
 	list profile 30a
-	list profile 35b
 	option bitswap 1
 	option sra 1
 	option us0 1 # VDSL2 only

easy-qos/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,8 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+        commit firewall
+EOT

ebtables-extensions/Makefile

@@ -1,257 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ebtables-extensions
-PKG_VERSION:=2.0.5
-PKG_LICENSE:=GPL-2.0
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ebtables-extensions.git
-PKG_SOURCE_VERSION:=7357622d806833d93d317164dc6673fbf5fd1629
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/ebt-vlantranslation
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables VLAN translation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_vlantranslation.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_vlantranslation)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dscp2pbit
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for DSCP-to-Pbit mapping
-  DEPENDS+=+kmod-ebtables
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dscp2pbit.ko
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dscp2pbit)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcp
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DHCP snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dhcp.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dhcp)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcpv6
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DHCPv6 snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dhcpv6.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dhcpv6)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-ra
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables NDP/RA snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_ra.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_ra)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dns
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DNS manipulation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dns.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dns)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-pppoe_disc
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables PPPoE manipulation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_pppoe_disc.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_pppoe_disc)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-l2pt
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables L2CP tunneling
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_l2pt.ko
-  DEPENDS+=@TARGET_airoha +kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_l2pt)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtarp
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended ARP matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtarp.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtarp)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtip
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended IPv4 matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtip.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtip)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtip6
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended IPv6 matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtip6.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtip6)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-igmpsnooping
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables IGMP snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_igmpsnooping.ko
-  DEPENDS+=+kmod-ebtables
-  # AUTOLOAD:=$(call AutoLoad,30,ebt_igmpsnooping) - Will be loaded on demand
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-mldsnooping
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables MLD snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_mldsnooping.ko
-  DEPENDS+=+kmod-ebtables
-  # AUTOLOAD:=$(call AutoLoad,30,ebt_mldsnooping) - Will be loaded on demand
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcp/description
-	Kernel module to enable DHCP snooping for ebtables
-endef
-
-define KernelPackage/ebt-dhcpv6/description
-	Kernel module to enable DHCPv6 snooping for ebtables
-endef
-
-define KernelPackage/ebt-ra/description
-	Kernel module to enable NDP/RA snooping for ebtables
-endef
-
-define KernelPackage/ebt-dns/description
-	Kernel module to enable DNS manipulation for ebtables
-endef
-
-define KernelPackage/ebt-pppoe_disc/description
-	Kernel module to enable PPPoE manipulation for ebtables
-endef
-
-define KernelPackage/ebt-l2pt/description
-	Kernel module to enable L2CP tunneling for ebtables
-endef
-
-define KernelPackage/ebt-xtarp/description
-	Kernel module to enable extended ARP matching for ebtables
-endef
-
-define KernelPackage/ebt-xtip/description
-	Kernel module to enable extended IPv4 matching for ebtables
-endef
-
-define KernelPackage/ebt-xtip6/description
-	Kernel module to enable extended IPv6 matching for ebtables
-endef
-
-define KernelPackage/ebt-vlantranslation/description
-	Kernel module to enable VLAN translation for ebtables
-endef
-
-define KernelPackage/ebt-dscp2pbit/description
-	Kernel module to enable DSCP-to-Pbit mapping for ebtables
-endef
-
-define KernelPackage/ebt-igmpsnooping/description
-	Kernel module to enable IGMP snooping for ebtables
-endef
-
-define KernelPackage/ebt-mldsnooping/description
-	Kernel module to enable MLD snooping for ebtables
-endef
-
--include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
-define Build/Prepare
-
-ifeq ($(LOCAL_DEV),1)
-	$(CP) -rf ./ebtables-extensions/* $(PKG_BUILD_DIR)/
-else
-	$(Build/Prepare/Default)
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcp.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcpv6.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_ra.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dns.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_pppoe_disc.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-ifeq ($(CONFIG_TARGET_airoha),y)
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_l2pt.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtarp.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip6.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_igmpsnooping.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_mldsnooping.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcp.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcpv6.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_ra.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dns.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_pppoe_disc.h $(1)/include/uapi/linux/netfilter_bridge/
-ifeq ($(CONFIG_TARGET_airoha),y)
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_l2pt.h $(1)/include/uapi/linux/netfilter_bridge/
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtarp.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip6.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_igmpsnooping.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_mldsnooping.h $(1)/include/uapi/linux/netfilter_bridge/
-endef
-
-ifeq ($(CONFIG_TARGET_airoha),y)
-  KERNEL_MAKE_FLAGS += PLATFORM="ECONET"
-endif
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)/src" modules
-endef
-
-$(eval $(call KernelPackage,ebt-vlantranslation))
-$(eval $(call KernelPackage,ebt-dscp2pbit))
-$(eval $(call KernelPackage,ebt-dhcp))
-$(eval $(call KernelPackage,ebt-dhcpv6))
-$(eval $(call KernelPackage,ebt-ra))
-$(eval $(call KernelPackage,ebt-dns))
-$(eval $(call KernelPackage,ebt-pppoe_disc))
-$(eval $(call KernelPackage,ebt-l2pt))
-$(eval $(call KernelPackage,ebt-xtarp))
-$(eval $(call KernelPackage,ebt-xtip))
-$(eval $(call KernelPackage,ebt-xtip6))
-$(eval $(call KernelPackage,ebt-igmpsnooping))
-$(eval $(call KernelPackage,ebt-mldsnooping))

ethmngr/Config.in

@@ -1,17 +0,0 @@
-if (PACKAGE_ethmngr)
-
-menu "Configurations"
-
-config ETHMNGR_MACVLAN_EXTENSION
-	bool "Enable datamodel MACVLAN vendor extension"
-	default y
-
-config ETHMNGR_EXPOSE_ETHERNET_OBJECT
-	bool "Expose ethernet ubus object to fetch and clear interface stats"
-	default y
-
-config ETHMNGR_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-endmenu
-endif

ethmngr/Makefile

@@ -5,29 +5,28 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=3.0.8
+PKG_VERSION:=2.1.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=5b40a8167d3e0e5c8fc9229abccd5c6acecbe814
 PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=c73e5b15718ca40b2740bbe6151dfbb2bcca16df
+PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
-
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 
 define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +libblobmsg-json +libjson-c +libc +libubus
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -36,43 +35,28 @@ define Package/ethmngr/description
  It uses APIs from the libethernet.so library.
 endef
 
-define Package/$(PKG_NAME)/config
-       source "$(SOURCE)/Config.in"
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        $(CP) -rf ./ethmngr/* $(PKG_BUILD_DIR)/
 endef
+endif
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_ETHMNGR_VENDOR_PREFIX),"")
-VENDOR_PREFIX = $(CONFIG_BBF_VENDOR_PREFIX)
-else
-VENDOR_PREFIX = $(CONFIG_ETHMNGR_VENDOR_PREFIX)
-endif
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(VENDOR_PREFIX)\\\"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ~/git/ethmngr/* $(PKG_BUILD_DIR)/
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
+define Build/Compile
 endef
 endif
 
-
-ifeq ($(CONFIG_ETHMNGR_MACVLAN_EXTENSION),y)
-TARGET_CFLAGS += -DETHMNGR_MACVLAN_EXTENSION
-endif
-
-ifeq ($(CONFIG_ETHMNGR_EXPOSE_ETHERNET_OBJECT),y)
-TARGET_CFLAGS += -DETHMNGR_EXPOSE_ETHERNET_OBJECT
-endif
-
 define Package/ethmngr/install
 	$(CP) ./files/* $(1)/
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
+endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "ethmngr",
-    "unified_daemon": true,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "Ethernet"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

ethmngr/files/etc/init.d/ethmngr

@@ -1,17 +1,28 @@
 #!/bin/sh /etc/rc.common
 
-START=80
+START=15
 STOP=90
 
 USE_PROCD=1
 PROG=/usr/sbin/ethmngr
 
+. /lib/functions.sh
+include /lib/ethernet
+
 start_service() {
 	if [ -f $PROG ]; then
-		procd_open_instance "ethmngr"
+		procd_open_instance
 		procd_set_param command ${PROG}
-		procd_append_param command -l 3
 		procd_set_param respawn
-		procd_close_instance "ethmngr"
+		procd_close_instance
 	fi
 }
+
+reload_service() {
+        stop
+        start
+}
+
+service_triggers() {
+	procd_add_reload_trigger network
+}

ethmngr/files/etc/ruleng/ethport.json

@@ -1,23 +0,0 @@
-{
-	"ethport_update": {
-		"if" : [
-			{
-				"event": "network.device",
-				"match": {
-					"wireless": false
-				}
-			}
-		],
-		"then" : [
-			{
-				"cli": "/sbin/hotplug-call ethernet",
-				"envs": {
-					"PORT": "&network.device->ifname",
-					"LINK": "&network.device->link"
-				},
-				"timeout": 1
-			}
-		]
-	}
-}
-

ethmngr/files/etc/uci-defaults/ruleng.ethport

@@ -1,2 +0,0 @@
-uci -q set ruleng.ethport=rule
-uci -q set ruleng.ethport.recipe='/etc/ruleng/ethport.json'

firewallmngr/Config.in

@@ -1,12 +0,0 @@
-if PACKAGE_firewallmngr
-
-menu "Configuration"
-
-config FIREWALLMNGR_PORT_TRIGGER
-	bool "Include Device.NAT.PortTrigger"
-	default y
-	help
-	   Set this option to include support for PortTrigger object.
-
-endmenu
-endif

firewallmngr/Makefile

@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=firewallmngr
-PKG_VERSION:=1.0.10
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/firewallmngr.git
-PKG_SOURCE_VERSION:=05ad0d6f7f21520eecd05429c14d1963de2a8463
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/firewallmngr
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Package to add Device.Firewall and Device.NAT. data model support.
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +firewall
-  DEPENDS+=+FIREWALLMNGR_PORT_TRIGGER:iptables-mod-trigger
-  DEPENDS+=+FIREWALLMNGR_PORT_TRIGGER:iptables-mod-nfqueue
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-endef
-
-define Package/firewallmngr/description
-  Package to add Device.Firewall. and Device.NAT. data model support.
-endef
-
-define Package/$(PKG_NAME)/config
-        source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/firewallmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-ifeq ($(CONFIG_FIREWALLMNGR_PORT_TRIGGER),y)
-	TARGET_CFLAGS += -DINCLUDE_PORT_TRIGGER
-endif
-
-define Package/firewallmngr/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-ifeq ($(CONFIG_FIREWALLMNGR_PORT_TRIGGER),y)
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/port-trigger
-
-	$(INSTALL_BIN) ./files/port-trigger/etc/init.d/port-trigger $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/port-trigger/etc/config/port-trigger $(1)/etc/config/
-	$(INSTALL_DATA) ./files/port-trigger/lib/port-trigger/port_trigger.sh $(1)/lib/port-trigger/
-endif
-	$(INSTALL_BIN) ./files/firewall.portmap $(1)/etc/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/
-
-	$(INSTALL_BIN) ./files/firewall.service $(1)/etc/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/
-
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libfirewallmngr.so $(1) $(PKG_NAME)
-endef
-
-$(eval $(call BuildPackage,firewallmngr))

firewallmngr/bbfdm_service.json

@@ -1,20 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "firewallmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "Firewall"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "NAT"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

firewallmngr/files/port-trigger/etc/config/port-trigger

@@ -1 +0,0 @@
-#port trigger uci file

firewallmngr/files/port-trigger/etc/init.d/port-trigger

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=20
-USE_PROCD=1
-
-. /lib/port-trigger/port_trigger.sh
-
-start_service() {
-	port_trigger_add
-}
-
-stop_service() {
-	port_trigger_clean
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger firewall
-	procd_add_reload_trigger port-trigger
-}
-
-reload_service() {
-	stop
-	start
-}

firewallmngr/files/port-trigger/lib/port-trigger/port_trigger.sh

@@ -1,169 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-process_port_trigger() {
-	local rule_id="$1"
-	local is_enabled=""
-	local duration=""
-	local trigger_dport=""
-	local trigger_dport_end=""
-	local protocol=""
-	local interface=""
-	local open_dport=""
-	local open_dport_end=""
-	local open_protocol=""
-	local ptg_id=""
-	local IP_RULE=""
-	local IP6_RULE=""
-	local IP_RULE_FWD=""
-
-	get_port_trigger() {
-		local ptg_name
-		config_get ptg_name "$1" "name"
-		if [ "$ptg_name" == "$2" ]; then
-			ptg_id="$1"
-			return
-		fi
-	}
-
-	ptg_id=""
-	config_get name "$rule_id" "port_trigger"
-	config_foreach get_port_trigger  "port_trigger" "$name"
-	[ -z "$ptg_id" ] && return
-
-	is_enabled=$(uci -q get port-trigger."$ptg_id".enable)
-
-	if [ -z "$is_enabled" ] || [ "$is_enabled" = "0" ]; then
-		return
-	fi
-
-	protocol=$(uci -q get port-trigger."$ptg_id".protocol)
-	[ -z "$protocol" ] && return
-
-	if [ "$protocol" = "UDP" ] || [ "$protocol" = "udp" ]; then
-		IP_RULE="$IP_RULE -p udp"
-		IP6_RULE="$IP6_RULE -p udp"
-		IP_RULE_FWD="$IP_RULE_FWD -p udp"
-	elif [ "$protocol" = "TCP" ] || [ "$protocol" = "tcp" ]; then
-		IP_RULE="$IP_RULE -p tcp"
-		IP6_RULE="$IP6_RULE -p tcp"
-		IP_RULE_FWD="$IP_RULE_FWD -p tcp"
-	else
-		return
-	fi
-
-	trigger_dport=$(uci -q get port-trigger."$ptg_id".port)
-	[ -z "$trigger_dport" ] && return
-	IP_RULE="$IP_RULE --dport $trigger_dport"
-	IP6_RULE="$IP6_RULE --dport $trigger_dport"
-
-	trigger_dport_end=$(uci -q get port-trigger."$ptg_id".end_port_range)
-	if [ -n "$trigger_dport_end" ]; then
-		IP_RULE="$IP_RULE:$trigger_dport"
-		IP6_RULE="$IP6_RULE:$trigger_dport"
-	fi
-
-	config_get open_protocol "$rule_id" "protocol"
-	if [ "$open_protocol" = "UDP" ] || [ "$open_protocol" = "udp" ]; then
-		IP_RULE="$IP_RULE -j TRIGGER --trigger-type out --trigger-proto udp"
-		IP6_RULE="$IP6_RULE -j TRIGGER --trigger-type out --trigger-proto udp"
-	elif [ "$open_protocol" = "TCP" ] || [ "$open_protocol" = "tcp" ]; then
-		IP_RULE="$IP_RULE -j TRIGGER --trigger-type out --trigger-proto tcp"
-		IP6_RULE="$IP6_RULE -j TRIGGER --trigger-type out --trigger-proto tcp"
-	else
-		return
-	fi
-
-	config_get open_dport "$rule_id" "port"
-	[ -z "$open_dport" ] && return
-	IP_RULE="$IP_RULE --trigger-match $open_dport"
-	IP6_RULE="$IP6_RULE --trigger-match $open_dport"
-	IP_RULE_FWD="$IP_RULE_FWD --dport $open_dport"
-
-	config_get open_dport_end "$rule_id" "end_port_range"
-	if [ -z "$open_dport_end" ]; then
-		IP_RULE="$IP_RULE --trigger-relate $open_dport"
-		IP6_RULE="$IP6_RULE --trigger-relate $open_dport"
-	else
-		IP_RULE="$IP_RULE-$open_dport_end --trigger-relate $open_dport-$open_dport_end"
-		IP6_RULE="$IP6_RULE-$open_dport_end --trigger-relate $open_dport-$open_dport_end"
-		IP_RULE_FWD="$IP_RULE_FWD:$open_dport_end"
-	fi
-
-	duration=$(uci -q get port-trigger."$ptg_id".auto_disable_duration)
-        if [ -n "$duration" ]; then
-                IP_RULE="$IP_RULE --trigger-timeout $duration"
-                IP6_RULE="$IP6_RULE --trigger-timeout $duration"
-        fi
-
-	interface=$(uci -q get port-trigger."$ptg_id".src)
-	[ -z "$interface" ] && return
-	device=$(uci -q get network.$interface.device)
-       	IP_RULE_1="iptables -w -t nat -A prerouting_porttrigger -i $device $IP_RULE"
-       	echo "$IP_RULE_1">>/tmp/port_trigger_iptables
-
-       	IP_RULE_1="ip6tables -w -t nat -A prerouting_porttrigger -i $device $IP6_RULE"
-       	echo "$IP_RULE_1">>/tmp/port_trigger_ip6tables
-
-        if [ -n "$duration" ]; then
-		echo "iptables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in --trigger-timeout $duration">>/tmp/port_trigger_iptables
-		echo "ip6tables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in --trigger-timeout $duration">>/tmp/port_trigger_ip6tables
-
-		echo "iptables -w -t nat -A prerouting_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type dnat --trigger-timeout $duration">>/tmp/port_trigger_iptables
-	else
-		echo "iptables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in">>/tmp/port_trigger_iptables
-		echo "ip6tables -w -t filter -A forwarding_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type in">>/tmp/port_trigger_ip6tables
-
-		echo "iptables -w -t nat -A prerouting_wan_porttrigger $IP_RULE_FWD -j TRIGGER --trigger-type dnat">>/tmp/port_trigger_iptables
-	fi
-}
-
-port_trigger_add() {
-	rm /tmp/port_trigger_iptables 2> /dev/null
-	rm /tmp/port_trigger_ip6tables 2> /dev/null
-	touch /tmp/port_trigger_iptables
-	touch /tmp/port_trigger_ip6tables
-
-	echo "iptables -w -t nat -N prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t nat -I PREROUTING -j prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t filter -N forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t filter -I forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	echo "iptables -w -t nat -N prerouting_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-	ret=$?
-	[ $ret -eq 0 ] && echo "iptables -w -t nat -A prerouting_wan_rule -j prerouting_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_iptables
-
-	echo "ip6tables -w -t nat -N prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	ret=$?
-	[ $ret -eq 0 ] && echo "ip6tables -w -t nat -I PREROUTING -j prerouting_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	echo "ip6tables -w -t filter -N forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-	ret=$?
-	[ $ret -eq 0 ] && echo "ip6tables -w -t filter -I forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null">>/tmp/port_trigger_ip6tables
-
-	# Load /etc/config/port-trigger UCI file
-	config_load port-trigger
-	config_foreach process_port_trigger rule
-
-	sh /tmp/port_trigger_iptables
-	sh /tmp/port_trigger_ip6tables
-}
-
-port_trigger_clean() {
-	iptables -w -t nat -D PREROUTING -j prerouting_porttrigger 2> /dev/null
-	iptables -w -t nat -F prerouting_porttrigger 2> /dev/null
-	iptables -w -t nat -X prerouting_porttrigger 2> /dev/null
-	iptables -w -t nat -D prerouting_wan_rule -j prerouting_wan_porttrigger 2> /dev/null
-	iptables -w -t nat -F prerouting_wan_porttrigger 2> /dev/null
-	iptables -w -t nat -X prerouting_wan_porttrigger 2> /dev/null
-	iptables -w -t filter -D forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null
-	iptables -w -t filter -F forwarding_wan_porttrigger 2> /dev/null
-	iptables -w -t filter -X forwarding_wan_porttrigger 2> /dev/null
-	ip6tables -w -t nat -D PREROUTING -j prerouting_porttrigger 2> /dev/null
-	ip6tables -w -t nat -F prerouting_porttrigger 2> /dev/null
-	ip6tables -w -t nat -X prerouting_porttrigger 2> /dev/null
-	ip6tables -w -t filter -D forwarding_wan_rule -j forwarding_wan_porttrigger 2> /dev/null
-	ip6tables -w -t filter -F forwarding_wan_porttrigger 2> /dev/null
-	ip6tables -w -t filter -X forwarding_wan_porttrigger 2> /dev/null
-}

fluent-bit/Makefile

@@ -1,180 +0,0 @@
-#
-# Copyright (C) 2024-2025 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fluent-bit
-PKG_VERSION:=4.0.4
-PKG_RELEASE:=$(AUTORELEASE)
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/fluent/fluent-bit.git
-PKG_SOURCE_VERSION=v$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/fluent-bit
-	CATEGORY:=Utilities
-	DEPENDS:= +libyaml +libopenssl +libcurl +libatomic +musl-fts +flex +bison +libstdcpp +@OPENSSL_WITH_NPN
-	TITLE:=Fluent-Bit
-	URL:=https://fluentbit.io/
-endef
-
-define Package/fluent-bit/description
-	Fluent Bit is a super fast, lightweight, and highly scalable logging and metrics processor and forwarder.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./fluent-bit/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-# General options
-TARGET_LDFLAGS +=-lfts -latomic
-
-CMAKE_OPTIONS+= \
-	-DFLB_RELEASE=Yes \
-	-DFLB_SMALL=No \
-	-DEXCLUDE_FROM_ALL=true \
-	-DFLB_SHARED_LIB=Yes \
-	-DFLB_DEBUG=Yes \
-	-DFLB_ALL=No \
-	-DFLB_JEMALLOC=No \
-	-DFLB_EXAMPLES=No \
-	-DFLB_CHUNK_TRACE=No \
-	-DFLB_BACKTRACE=No \
-	-DFLB_KAFKA=No \
-	-DFLB_WASM=No \
-	-DFLB_LUAJIT=No
-
-# In plugins
-CMAKE_OPTIONS += \
-	-DFLB_IN_SYSLOG=Yes \
-	-DFLB_IN_CPU=Yes \
-	-DFLB_IN_MEM=Yes \
-	-DFLB_IN_DISK=Yes \
-	-DFLB_IN_EXEC=Yes \
-	-DFLB_IN_HEAD=Yes \
-	-DFLB_IN_KMSG=Yes \
-	-DFLB_IN_TAIL=Yes \
-	-DFLB_IN_FORWARD=No \
-	-DFLB_IN_PROC=No \
-	-DFLB_IN_RANDOM=No \
-	-DFLB_IN_SERIAL=No \
-	-DFLB_IN_MQTT=No \
-	-DFLB_IN_STDIN=No \
-	-DFLB_IN_SYSTEMD=No \
-	-DFLB_IN_TCP=No \
-	-DFLB_IN_THERMAL=No \
-	-DFLB_IN_UDP=No \
-	-DFLB_IN_DOCKER=No \
-	-DFLB_IN_EXEC_WASI=No \
-	-DFLB_IN_EVENT_TYPE=No \
-	-DFLB_IN_FLUENTBIT_METRICS=No \
-	-DFLB_IN_KUBERNETES_EVENTS=No \
-	-DFLB_IN_KAFKA=No \
-	-DFLB_IN_LIB=No \
-	-DFLB_IN_SYSTEMD=No \
-	-DFLB_IN_DUMMY=No \
-	-DFLB_IN_NETIF=No \
-	-DFLB_IN_COLLECTD=No \
-	-DFLB_IN_PROMETHEUS_SCRAPE=No \
-	-DFLB_IN_STATSD=No \
-	-DFLB_IN_STORAGE_BACKLOG=No \
-	-DFLB_IN_PODMAN_METRICS=No \
-	-DFLB_IN_OPENTELEMETRY=No \
-	-DFLB_IN_ELASTICSEARCH=No \
-	-DFLB_IN_CALYPTIA_FLEET=No \
-	-DFLB_IN_SPLUNK=No
-	-DFLB_IN_HEALTH=No \
-	-DFLB_IN_WINLOG=No \
-	-DFLB_IN_WINEVTLOG=No
-
-
-# Filter options
-CMAKE_OPTIONS += \
-	-DFLB_FILTER_AWS=No \
-	-DFLB_FILTER_ECS=No \
-	-DFLB_FILTER_KUBERNETES=No \
-	-DFLB_FILTER_LUA=No \
-	-DFLB_FILTER_NEST=No \
-	-DFLB_FILTER_RECORD_MODIFIER=No \
-	-DFLB_FILTER_THROTTLE=No \
-	-DFLB_FILTER_TYPE_CONVERTER=No \
-	-DFLB_FILTER_WASM=No \
-	-DFLB_FILTER_TENSORFLOW=No \
-	-DFLB_FILTER_GEOIP2=No \
-	-DFLB_FILTER_NIGHTFALL=No
-
-# out plugins
-CMAKE_OPTIONS += \
-	-DFLB_OUT_EXIT=Yes \
-	-DFLB_OUT_FORWARD=Yes \
-	-DFLB_OUT_HTTP=Yes \
-	-DFLB_OUT_NATS=Yes \
-	-DFLB_OUT_TCP=Yes \
-	-DFLB_OUT_UDP=Yes \
-	-DFLB_OUT_FILE=Yes \
-	-DFLB_OUT_STDOUT=Yes \
-	-DFLB_OUT_SYSLOG=Yes \
-	-DFLB_OUT_NULL=Yes \
-	-DFLB_OUT_PLOT=No \
-	-DFLB_OUT_AZURE=No \
-	-DFLB_OUT_AZURE_BLOB=No \
-	-DFLB_OUT_AZURE_LOGS_INGESTION=No \
-	-DFLB_OUT_AZURE_KUSTO=No \
-	-DFLB_OUT_BIGQUERY=No \
-	-DFLB_OUT_CALYPTIA=No \
-	-DFLB_OUT_COUNTER=No \
-	-DFLB_OUT_DATADOG=No \
-	-DFLB_OUT_ES=No \
-	-DFLB_OUT_GELF=No \
-	-DFLB_OUT_INFLUXDB=No \
-	-DFLB_OUT_KAFKA=No \
-	-DFLB_OUT_NRLOGS=No \
-	-DFLB_OUT_OPENSEARCH=No \
-	-DFLB_OUT_TD=No \
-	-DFLB_OUT_SKYWALKING=No \
-	-DFLB_OUT_SLACK=No \
-	-DFLB_OUT_SPLUNK=No \
-	-DFLB_OUT_STACKDRIVER=No \
-	-DFLB_OUT_LIB=No \
-	-DFLB_OUT_FLOWCOUNTER=No \
-	-DFLB_OUT_LOGDNA=No \
-	-DFLB_OUT_LOKI=No \
-	-DFLB_OUT_KAFKA=No \
-	-DFLB_OUT_KAFKA_REST=No \
-	-DFLB_OUT_CLOUDWATCH_LOGS=No \
-	-DFLB_OUT_KINESIS_FIREHOSE=No \
-	-DFLB_OUT_KINESIS_STREAMS=No \
-	-DFLB_OUT_OPENTELEMETRY=No \
-	-DFLB_OUT_PROMETHEUS_EXPORTER=No \
-	-DFLB_OUT_PROMETHEUS_REMOTE_WRITE=No \
-	-DFLB_OUT_S3=No \
-	-DFLB_OUT_VIVO_EXPORTER=No \
-	-DFLB_OUT_WEBSOCKET=No \
-	-DFLB_OUT_ORACLE_LOG_ANALYTICS=No \
-	-DFLB_OUT_CHRONICLE=No \
-	-DFLB_OUT_PGSQL=No
-
-define Package/fluent-bit/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/fluent-bit
-	$(INSTALL_DIR) $(1)/etc/fluent-bit/conf.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/fluent-bit $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/fluent-bit.conf $(1)/etc/fluent-bit/fluent-bit.conf
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/conf/parsers.conf $(1)/etc/fluent-bit/parsers.conf
-endef
-
-$(eval $(call BuildPackage,fluent-bit))

fluent-bit/files/fluent-bit.conf

@@ -1,19 +0,0 @@
-[SERVICE]
-    flush           3
-    daemon          Off
-    log_level       info
-    parsers_file    /etc/fluent-bit/parsers.conf
-
-[INPUT]
-    name            syslog
-    tag             syslog
-    path            /dev/log
-
-[INPUT]
-    name            kmsg
-    tag             kernel
-
-[OUTPUT]
-    name            null
-    match           *
-

fluent-bit/patches/0001-fix_out_file_plugin.patch

@@ -1,14 +0,0 @@
-diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
-index 2e47c9666..42ace24c6 100644
---- a/plugins/out_file/file.c
-+++ b/plugins/out_file/file.c
-@@ -45,6 +45,9 @@
- #define NEWLINE "\n"
- #endif
- 
-+#undef PATH_MAX
-+#define PATH_MAX 256
-+
- struct flb_file_conf {
-     const char *out_path;
-     const char *out_file;

fluent-bit/patches/0002-add_hostname_to_log_dump.patch

@@ -1,45 +0,0 @@
-diff --git a/plugins/out_file/file.c b/plugins/out_file/file.c
-index 2e47c9666..95d28e438 100644
---- a/plugins/out_file/file.c
-+++ b/plugins/out_file/file.c
-@@ -27,6 +27,7 @@
- #include <msgpack.h>
- 
- #include <stdio.h>
-+#include <unistd.h>
- #include <sys/types.h>
- #include <sys/stat.h>
- #include <fcntl.h>
-@@ -55,6 +56,7 @@ struct flb_file_conf {
-     int csv_column_names;
-     int mkdir;
-     struct flb_output_instance *ins;
-+    char hostname[256];
- };
- 
- static char *check_delimiter(const char *str)
-@@ -141,6 +143,9 @@ static int cb_file_init(struct flb_output_instance *ins,
-         }
-     }
- 
-+    if (gethostname(ctx->hostname, sizeof(ctx->hostname)) != 0)
-+	    snprintf(ctx->hostname, sizeof(ctx->hostname), "%s", "localhost");
-+
-     tmp = flb_output_get_property("delimiter", ins);
-     ret_str = check_delimiter(tmp);
-     if (ret_str != NULL) {
-@@ -233,12 +238,8 @@ static int template_output_write(struct flb_file_conf *ctx,
-     int i;
-     msgpack_object_kv *kv;
- 
--    /*
--     * Right now we treat "{time}" specially and fill the placeholder
--     * with the metadata timestamp (formatted as float).
--     */
--    if (!strncmp(key, "time", size)) {
--        fprintf(fp, "%f", flb_time_to_double(tm));
-+    if (!strncmp(key, "hostname", size)) {
-+        fprintf(fp, "%s", ctx->hostname);
-         return 0;
-     }
- 

fluent-bit/patches/0003-prepend_length_in_syslog_output.patch

@@ -1,47 +0,0 @@
-diff --git a/plugins/out_syslog/syslog.c b/plugins/out_syslog/syslog.c
-index 4ecc7c4ac..cfe568245 100644
---- a/plugins/out_syslog/syslog.c
-+++ b/plugins/out_syslog/syslog.c
-@@ -776,12 +776,42 @@ static flb_sds_t syslog_format(struct flb_syslog *ctx, msgpack_object *o,
-         }
- 
-         if (ctx->parsed_mode != FLB_SYSLOG_UDP) {
-+            unsigned int msg_len = 0;
-+
-+            /* Create new SDS for length prefix */
-+            flb_sds_t prefix = flb_sds_create_size(ctx->maxsize + 32);
-+            if (!prefix) {
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            /* Add newline also to make behaviour similar to syslog-ng */
-             tmp = flb_sds_cat(*s, "\n", 1);
-             if (!tmp) {
-+                flb_sds_destroy(prefix);
-                 ret_sds = NULL;
-                 goto clean;
-             }
-             *s = tmp;
-+
-+            msg_len = flb_sds_len(*s);
-+            tmp = flb_sds_printf(&prefix, "%u ", msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+            prefix = tmp;
-+
-+            tmp = flb_sds_cat(prefix, *s, msg_len);
-+            if (!tmp) {
-+                flb_sds_destroy(prefix);
-+                ret_sds = NULL;
-+                goto clean;
-+            }
-+
-+            flb_sds_destroy(*s);
-+            *s = tmp;
-         }
-     }
-     else {

fluent-bit/patches/0005-kmsg_log.patch

@@ -1,32 +0,0 @@
-diff --git a/plugins/in_kmsg/in_kmsg.c b/plugins/in_kmsg/in_kmsg.c
-index cd5c4cd17..9524cf194 100644
---- a/plugins/in_kmsg/in_kmsg.c
-+++ b/plugins/in_kmsg/in_kmsg.c
-@@ -165,6 +165,15 @@ static inline int process_line(const char *line,
- 
-     flb_time_set(&ts, ctx->boot_time.tv_sec + tv.tv_sec, tv.tv_usec * 1000);
- 
-+    /* Format syslog timestamp: "Jul 03 10:31:53" */
-+    time_t real_time = ctx->boot_time.tv_sec + tv.tv_sec;
-+    struct tm tm_info;
-+    char syslog_ts[32];
-+
-+    localtime_r(&real_time, &tm_info);
-+    strftime(syslog_ts, sizeof(syslog_ts), "%b %d %H:%M:%S", &tm_info);
-+    int syslog_ts_len = strlen(syslog_ts);
-+
-     /* Now process the human readable message */
-     p = strchr(p, ';');
-     if (!p) {
-@@ -198,7 +207,10 @@ static inline int process_line(const char *line,
-                 FLB_LOG_EVENT_UINT64_VALUE(tv.tv_usec),
- 
-                 FLB_LOG_EVENT_CSTRING_VALUE("msg"),
--                FLB_LOG_EVENT_STRING_VALUE((char *) p, line_len - 1));
-+                FLB_LOG_EVENT_STRING_VALUE((char *) p, line_len - 1),
-+
-+                FLB_LOG_EVENT_CSTRING_VALUE("syslog_ts"),
-+                FLB_LOG_EVENT_STRING_VALUE(syslog_ts, syslog_ts_len));
-     }
- 
-     if (ret == FLB_EVENT_ENCODER_SUCCESS) {