Dectmngr: add a uci option dect.global.log_level for log level configuration

Change the way to configure tx/rx gain

4g-support/Makefile

@@ -1,31 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=4g-support
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/4g-support
-  CATEGORY:=Network
-  TITLE:=4G Network Setup Tools
-endef
-
-define Package/4g-support/description
-	4g-support contains necessary tools to setup 4G WAN connection
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/4g-support/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -1,62 +0,0 @@
-opengt
-set com 115200n81
-set comecho off
-set senddelay 0.05
-waitquiet 1 0.2
-
-:start
- if $env("USE_DISCONNECT")="1" goto disconnect
- send "AT^^NDISDUP=1,1,\""
- send $env("USE_APN")
-
- if $env("USE_AUTHTYPE")="-1" goto noauth
- else goto auth
-
-:noauth
- send "\"^m"
- goto result
-
-:auth
- send "\",\""
- send $env("USE_USERID")
- send "\",\""
- send $env("USE_PASSWORD")
- send "\","
- send $env("USE_AUTHTYPE")
- send "^m"
- goto result
-
-:result
- waitfor 5 "OK","ERR","ERROR"
- if % = 0 goto connok
- if % = 1 goto connerr
- if % = 2 goto connerr
-
-:connok
- print "WWAN connection established.\r\n"
- goto done
-
-:connerr
- print "WWAN error. Connection failed.\r\n"
- exit 1
-
-:disconnect
- send "AT^^NDISDUP=1,0,\""
- send $env("USE_APN")
- send "\"^m"
-
- waitfor 5 "OK","ERR","ERROR"
- if % = 0 goto disconnok
- if % = 1 goto disconnerr
- if % = 2 goto disconnerr
-
-:disconnok
- print "WWAN connection disconnected.\r\n"
- goto done
-
-:disconnerr
- print "WWAN disconnection error.\r\n"
- exit 1
-
-:done
- exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -1,35 +0,0 @@
-. /lib/network/config.sh
-. /usr/share/libubox/jshn.sh
-
-iface_status() {
-	local iface=$1
-	local up
-	json_load "$(ifstatus $iface)"
-	json_get_var up up
-	json_close_object
-	return $up
-}
-
-case "$ACTION" in
-        add|register)
-                if [ "${INTERFACE:0:4}" == "wwan" ]; then
-                        netname=$(get_network_of "$INTERFACE")
-                        for net in $netname; do
-				local service=$(uci -q get network.$net.service)
-				local cnt=0
-				while $(iface_status $net); do
-		                        ifup $net
-					if [ "$service" == "qmi" ]; then
-						cnt=$(($cnt+1))
-						# quit trying if still not online after three times
-						[ $cnt -eq 3 ] && break
-						sleep 5
-					else
-						break
-					fi
-				done
-                        done
-                fi
-        ;;
-esac
-

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
-
-sanitize() {
-	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
-}
-
-find_usb_attrs() {
-	usb_dir="/sys/$DEVPATH"
-	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
-
-	uVid=$(cat "$usb_dir/idVendor")
-	uPid=$(cat "$usb_dir/idProduct")
-	uMa=$(sanitize "$usb_dir/manufacturer")
-	uPr=$(sanitize "$usb_dir/product")
-	uSe=$(sanitize "$usb_dir/serial")
-	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
-	bConf=$(cat "$usb_dir/bConfigurationValue")
-	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
-	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
-	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
-	interface=$(cat $usb_dir/interface)
-	if [ -n "$cdcdev" ]; then
-		comdev=$cdcdev
-		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
-		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
-		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
-	else
-		comdev=$ttydev
-		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
-		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
-		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
-	fi
-	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
-	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
-	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
-}
-
-convert_to_mbim() {
-	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
-		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
-	fi
-}
-
-usbno=$(echo $DEVPATH | cut -d'/' -f5)
-usbbr=$(echo $DEVPATH | cut -d'/' -f7)
-case "$usbbr" in
-	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
-esac
-
-#devno=$(basename $DEVPATH)
-
-find_usb_attrs
-if [ "$ACTION" = add ]; then
-	convert_to_mbim "$uVid:$uPid"
-	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
-		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
-			sed -i "/$usbno:$usbbr/ d" /var/usbnets
-			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
-			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-
-		fi
-	fi
-fi
-
-if [ "$ACTION" = remove ]; then
-	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
-		sed -i "/$usbno:$usbbr/ d" /var/usbnets
-		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-	fi
-fi

4g-support/files/etc/modemdb

@@ -1,100 +0,0 @@
-1bbb:011e	qmi
-1a8d:1001	ecm
-1a8d:100c	ecm
-1a8d:100d	ecm
-16d8:6280	qmi
-16d8:6803	qmi
-16d8:6804	qmi
-16d8:7003	qmi
-16d8:700a	qmi
-2001:7d01	mbim
-2001:7d02	mbim
-2001:7d03	mbim
-12d1:14ac	qmi
-12d1:140c	qmi
-12d1:1506	qmi	Huawei		E367/392/398
-12d1:1506	ncm	Huawei		E3276
-12d1:14d2	qmi
-12d1:1c07	ncm
-12d1:1436	ecm
-12d1:14c9	qmi
-12d1:14db	ecm
-12d1:151d	mbim
-12d1:151e	qmi	Huawei		E353
-12d1:1c1e	ncm
-12d1:150c	qmi
-12d1:150f	qmi
-12d1:151b	qmi
-12d1:142d	ecm
-12d1:1432	ecm
-12d1:1c1f	ncm
-12d1:1433	qmi
-12d1:1465	ecm
-12d1:14ca	qmi
-12d1:14cf	ncm
-12d1:14bc	ecm
-12d1:14ae	ecm
-12d1:1576	mbim
-12d1:1577	mbim
-12d1:1400	mbim
-12d1:14f7	mbim
-12d1:1464	qmi
-12d1:14cb	qmi
-12d1:14cc	qmi
-12d1:14c6	qmi
-12d1:14fa	mbim
-12d1:1578	mbim
-12d1:14c8	qmi
-12d1:14f8	mbim
-12d1:1575	mbim
-12d1:1579	mbim
-12d1:157a	mbim
-12d1:157b	mbim
-12d1:157f	mbim
-12d1:1f16	mbim	Vodafone	K5150
-12d1:1404	qmi
-19f2:1700	ecm	
-1410:b001	qmi
-1527:1000	ecm
-0b3c:c005	qmi
-0f3d:68a2	qmi
-1199:68a2	qmi	SierraWireless	M7710
-1199:68c0	qmi	SierraWireless	M7304
-1349:1100	qmi
-1349:1200	qmi	
-1199:683c	qmi
-2360:2100	qmi
-2360:2200	qmi
-2360:2300	qmi
-2507:0000	qmi	
-19d2:0055	qmi
-19d2:0052	qmi
-19d2:0063	qmi
-19d2:1008	qmi
-19d2:1010	qmi
-19d2:2002	qmi
-19d2:1176	qmi
-19d2:1023	mbim
-19d2:0104	qmi
-19d2:1018	qmi
-19d2:1032	mbim
-19d2:1402	qmi
-19d2:1405	ecm
-19d2:1426	qmi
-19d2:0031	qmi
-19d2:0124	qmi
-19d2:1254	qmi
-19d2:0017	qmi
-19d2:0002	qmi
-19d2:0121	qmi
-19d2:1252	qmi
-19d2:0157	qmi
-19d2:0167	qmi
-19d2:0199	qmi
-19d2:0257	qmi
-19d2:0326	qmi
-19d2:0349	ecm
-19d2:1408	ecm
-19d2:0284	qmi
-19d2:0019	qmi
-19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -1,159 +0,0 @@
-#!/bin/sh
-INCLUDE_ONLY=1
-
-. /lib/functions.sh
-. ../netifd-proto.sh
-init_proto "$@"
-
-proto_4g_init_config() {
-	proto_config_add_string "modem"
-	proto_config_add_string "service"
-	proto_config_add_string "comdev"
-	proto_config_add_string "ipaddr"
-	proto_config_add_string "netmask"
-	proto_config_add_string "hostname"
-	proto_config_add_string "clientid"
-	proto_config_add_string "vendorid"
-	proto_config_add_boolean "broadcast"
-	proto_config_add_string "reqopts"
-	proto_config_add_string "apn"
-	proto_config_add_string "username"
-	proto_config_add_string "password"
-	proto_config_add_boolean "lte_apn_use"
-	proto_config_add_string "lte_apn"
-	proto_config_add_string "lte_username"
-	proto_config_add_string "lte_password"
-	proto_config_add_string "pincode"
-	proto_config_add_string "technology"
-	proto_config_add_string "auto"
-}
-
-proto_4g_setup() {
-	local config="$1"
-	local iface="$2"
-
-        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
-        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
-
-        local opt dhcpopts
-        for opt in $reqopts; do
-                append dhcpopts "-O $opt"
-        done
-
-        for opt in $sendopts; do
-                append dhcpopts "-x $opt"
-        done
-
-        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
-        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
-        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
-        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
-        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
-        [ -n "$zone" ] && proto_export "ZONE=$zone"
-        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
-
-        json_get_var comdev comdev
-        json_get_var apn apn
-        json_get_var service service
-        json_get_var pincode pincode
-
-
-#	if [ -n "$modem" ]; then
-#		service=$(echo $modem | cut -d':' -f1)
-#		comdev=$(echo $modem | cut -d':' -f2)
-#		iface=$(echo $modem | cut -d':' -f3)
-#	fi
-	
-	case "$service" in
-		ecm)
-		;;
-		eem)
-		;;
-		mbim)
-			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$mbimdev}"
-			[ -n "$pincode" ] && {
-				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
-					set -o pipefail
-					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
-						mbimcli -d $comdev --query-pin-state
-						proto_notify_error "$config" PIN_FAILED
-						proto_block_restart "$interface"
-						return 1
-					fi
-				fi
-			}
-			APN="$apn" mbim-network $comdev start
-		;;
-		ncm)
-			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
-			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
-		;;
-		qmi)
-			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$qmidev}"
-			[ -n "$pincode" ] && {
-				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
-					set -o pipefail
-					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
-						qmicli -d $comdev --dms-uim-get-pin-status
-						proto_notify_error "$config" PIN_FAILED
-						proto_block_restart "$interface"
-						return 1
-					fi
-				fi
-			}
-			APN="$apn" qmi-network $comdev start
-		;;		
-	esac
-	
-	proto_export "INTERFACE=$config"
-	proto_run_command "$config" udhcpc -R \
-		-p /var/run/udhcpc-$iface.pid \
-		-s /lib/netifd/dhcp.script \
-		-f -t 0 -i "$iface" \
-		${ipaddr:+-r $ipaddr} \
-		${hostname:+-H $hostname} \
-		${vendorid:+-V $vendorid} \
-		$clientid $broadcast $dhcpopts
-}
-
-proto_4g_teardown() {
-	local interface="$1"
-	local iface="$2"
-	local modem service comdev
-
-        config_load network
-        config_get service $interface service
-        config_get comdev $interface comdev
-
-#	config_get modem $interface modem
-#	if [ -n "$modem" ]; then
-#		service=$(echo $modem | cut -d':' -f1)
-#		comdev=$(echo $modem | cut -d':' -f2)
-#		iface=$(echo $modem | cut -d':' -f3)
-#	fi
-	
-	case "$service" in
-		ecm)
-		;;
-		eem)
-		;;
-		mbim)
-			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$mbimdev}"
-			mbim-network $comdev stop
-		;;
-		ncm)
-			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
-		;;
-		qmi)
-			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
-			local comdev="${comdev:-$qmidev}"
-			qmi-network $comdev stop
-		;;		
-	esac
-	proto_kill_command "$interface"
-}
-
-add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -1,773 +0,0 @@
-#
-# Copyright (C) 2008-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=asterisk18-mod
-PKG_VERSION:=1.8.10.1
-
-PKG_SOURCE_VERSION:=1a9ae7d68f2190eb009e892525163d23f9d1750e
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
-
-PKG_RELEASE:=$(PKG_SOURCE_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
--include $(INCLUDE_DIR)/ltqtapi.mk
-include $(INCLUDE_DIR)/package.mk
-
-define Package/asterisk18-mod/Default
-  SUBMENU:=Telephony
-  SECTION:=net
-  CATEGORY:=Network
-  URL:=http://www.asterisk.org/
-endef
-
-define Package/asterisk18-mod/Default/description
- Asterisk is a complete PBX in software. It provides all of the features
- you would expect from a PBX and more. Asterisk does voice over IP in three
- protocols, and can interoperate with almost all standards-based telephony
- equipment using relatively inexpensive hardware.
-endef
-
-
-define Package/asterisk18-mod
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Complete open source PBX, v1.8x
-  MENU:=1
-  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
-endef
-
-define Package/asterisk18-mod/description
-$(call Package/asterisk18-mod/Default/description)
-endef
-
-define Package/asterisk18-mod-sounds
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Sound files
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-sounds/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains sound files for Asterisk.
-endef
-
-define Package/asterisk18-mod-voicemail
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Voicemail support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-voicemail/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains voicemail related modules for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-transfer
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Call transfer support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-transfer/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains the call transfer support module for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-softhangup
-$(call Package/asterisk18-mod/Default)
-  TITLE:=SoftHangup application
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-softhangup/description
-$(call Package/asterisk18-mod/Default/description)
- This package contains the SoftHangup support module for Asterisk.
-endef
-
-define Package/asterisk18-mod-app-meetme
-$(call Package/asterisk18-mod/Default)
-  TITLE:=conferencing support
-  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
-endef
-
-define Package/asterisk18-mod-app-meetme/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the MeetMe application driver Conferencing support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-iax2
-$(call Package/asterisk18-mod/Default)
-  TITLE:=IAX support
-  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
-endef
-
-define Package/asterisk18-mod-chan-iax2/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides IAX support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-cdr
-$(call Package/asterisk18-mod/Default)
-  TITLE:=CDR support
-  DEPENDS:= asterisk18-mod +libsqlite3
-endef
-
-define Package/asterisk18-mod-cdr/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Call Detail Record support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-musiconhold
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MOH support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-musiconhold/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Music On Hold support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-voice
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Voice client/pbx support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-voice/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides Voice Client/pbx support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-srtp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=SRTP support
-  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
-endef
-
-define Package/asterisk18-mod-res-srtp/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides SRTP support to
- Asterisk.
-endef
-
-define Package/asterisk18-mod-res-stun
-$(call Package/asterisk18-mod/Default)
-  TITLE:=STUN support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-app-queue
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Queue support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-gtalk
-$(call Package/asterisk18-mod/Default)
-  TITLE:=GTalk support
-  DEPENDS:= asterisk18-mod +libiksemel
-endef
-
-define Package/asterisk18-mod-chan-gtalk/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_gtalk and res_jabber for GTalk
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-res-timing-timerfd
-$(call Package/asterisk18-mod/Default)
-  TITLE:= Timerfd Timing Interface
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-timing-pthread
-$(call Package/asterisk18-mod/Default)
-  TITLE:= pthread Timing Interface
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-res-fax
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Generic FAX Resource for FAX technology resource modules
-  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
-endef
-
-define Package/asterisk18-mod-res-fax-spandsp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Spandsp T.38 and G.711 FAX Resource
-  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
-endef
-
-define Package/asterisk18-mod-chan-mgcp
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MGCP channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-mgcp/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_mgcp support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-skinny
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Skinny channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-skinny/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_skinny support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-brcm
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Broadcom channel support
-  DEPENDS:= asterisk18-mod
-endef
-
-define Package/asterisk18-mod-chan-brcm/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_brcm support to Asterisk.
-endef
-
-define Package/asterisk18-mod-curl
-$(call Package/asterisk18-mod/Default)
-  TITLE:=CURL support
-  DEPENDS:= asterisk18-mod +libcurl
-endef
-
-define Package/asterisk18-mod-curl/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides CURL
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-mysql
-$(call Package/asterisk18-mod/Default)
-  TITLE:=MySQL support
-  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
-endef
-
-define Package/asterisk18-mod-mysql/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides MySQL
- support to Asterisk.
-endef
-
-define Package/asterisk18-mod-chan-lantiq
-$(call Package/asterisk18-mod/Default)
-  TITLE:=Lantiq TAPI support
-  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
-  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
-  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
-endef
-
-define Package/asterisk18-mod-chan-lantiq/description
-$(call Package/asterisk18-mod/Default/description)
- This package provides the channel chan_lantiq support to Asterisk.
-endef
-
-CONFIGURE_ARGS+= \
-	--without-inotify
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
-  CONFIGURE_ARGS+= \
-	--with-dahdi="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-dahdi
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
-  CONFIGURE_ARGS+= \
-	--with-gnutls="$(STAGING_DIR)/usr" \
-	--with-iksemel="$(STAGING_DIR)/usr"
-  SITE_VARS+= \
-	ac_cv_lib_iksemel_iks_start_sasl=yes \
-	ac_cv_lib_gnutls_gnutls_bye=yes
-else
-  CONFIGURE_ARGS+= \
-	--without-gnutls \
-	--without-iksemel
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
-  CONFIGURE_ARGS+= \
-	--with-curl="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-curl
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
-  CONFIGURE_ARGS+= \
-	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
-else
-  CONFIGURE_ARGS+= \
-	--without-mysqlclient
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
-  CONFIGURE_ARGS+= \
-    --with-spandsp="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-    --without-spandsp
-endif
-
-ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
-  CONFIGURE_ARGS+= \
-	--with-srtp="$(STAGING_DIR)/usr"
-else
-  CONFIGURE_ARGS+= \
-	--without-srtp
-endif
-
-ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
-  EXTRA_CFLAGS += -DNTR_SUPPORT
-endif
-
-CONFIGURE_ARGS+= \
-	--without-curses \
-	--with-gsm=internal \
-	--without-cap \
-	--without-gtk \
-	--without-gtk2 \
-	--without-isdnnet \
-	--without-kde \
-	--without-misdn \
-	--without-nbs \
-	--with-ncurses="$(STAGING_DIR)/usr" \
-	--without-netsnmp \
-	--without-newt \
-	--without-odbc \
-	--without-ogg \
-	--without-osptk \
-	--with-popt="$(STAGING_DIR)/usr" \
-	--without-pri \
-	--without-qt \
-	--without-radius \
-	--without-sdl \
-	--without-suppserv \
-	--without-tds \
-	--without-termcap \
-	--without-tinfo \
-	--without-vorbis \
-	--without-vpb \
-	--with-z="$(STAGING_DIR)/usr" \
-	--with-sounds-cache="$(DL_DIR)" \
-	--disable-xmldoc
-
-# I've had strange errors with -fno-caller-saves
-# in global CFLAGS so revert it. /Ronny
-EXTRA_CFLAGS+= -O2 -fcaller-saves
-EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
-EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
-
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-ifneq ($(CONFIG_TARGET_lantiq),)
-	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
-endif
-endef
-
-define Build/Configure
-	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
-	$(call Build/Configure/Default,,$(SITE_VARS))
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(PKG_BUILD_DIR)" \
-		include/asterisk/version.h \
-		include/asterisk/buildopts.h defaults.h \
-		makeopts.embed_rules
-	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
-	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
-	$(MAKE) -C "$(PKG_BUILD_DIR)" \
-		ASTVARLIBDIR="/usr/lib/asterisk" \
-		ASTDATADIR="/usr/lib/asterisk" \
-		ASTKEYDIR="/usr/lib/asterisk" \
-		ASTDBDIR="/usr/lib/asterisk" \
-		NOISY_BUILD="1" \
-		DEBUG="" \
-		OPTIMIZE="" \
-		DESTDIR="$(PKG_INSTALL_DIR)" \
-		all install samples
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
-endef
-
-define Package/asterisk18-mod/conffiles
-/etc/asterisk/asterisk.conf
-/etc/asterisk/modules.conf
-/etc/asterisk/extensions.conf
-/etc/asterisk/sip.conf
-/etc/asterisk/sip_notify.conf
-/etc/asterisk/features.conf
-/etc/asterisk/indications.conf
-/etc/asterisk/logger.conf
-/etc/asterisk/manager.conf
-/etc/asterisk/rtp.conf
-/etc/default/asterisk
-/etc/init.d/asterisk
-endef
-
-define Package/asterisk18-mod/install
-	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
-	for f in asterisk extensions features \
-		indications logger manager modules \
-		sip sip_notify rtp; do \
-		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
-	done
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	for f in app_dial app_echo app_playback app_macro \
-		chan_sip res_rtp_asterisk res_rtp_multicast \
-		codec_ulaw codec_gsm \
-		format_gsm format_pcm format_wav format_wav_gsm \
-		pbx_config \
-		func_strings func_timeout func_callerid func_logic; do \
-		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
-	done
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/default
-	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
-endef
-
-define Package/asterisk18-mod-sounds/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
-	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
-	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
-endef
-
-
-define Package/asterisk18-mod-voicemail/conffiles
-/etc/asterisk/voicemail.conf
-endef
-
-define Package/asterisk18-mod-voicemail/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
-endef
-
-define Package/asterisk18-mod-app-meetme/conffiles
-/etc/asterisk/meetme.conf
-endef
-
-define Package/asterisk18-mod-app-meetme/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
-endef
-
-define Package/asterisk18-mod-chan-iax2/conffiles
-/etc/asterisk/iax.conf
-/etc/asterisk/iaxprov.conf
-endef
-
-define Package/asterisk18-mod-cdr/conffiles
-/etc/asterisk/cdr.conf
-/etc/asterisk/cdr_custom.conf
-/etc/asterisk/cdr_manager.conf
-/etc/asterisk/cdr_odbc.conf
-/etc/asterisk/cdr_pgsql.conf
-/etc/asterisk/cdr_tds.conf
-endef
-
-define Package/asterisk18-mod-res-musiconhold/conffiles
-/etc/asterisk/musiconhold.conf
-endef
-
-define Package/asterisk18-mod-chan-iax2/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-cdr/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-musiconhold/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-voice/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-gtalk/conffiles
-/etc/asterisk/gtalk.conf
-/etc/asterisk/jabber.conf
-endef
-
-define Package/asterisk18-mod-chan-gtalk/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-timing-timerfd/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-timing-pthread/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-fax/conffiles
-/etc/asterisk/res_fax.conf
-endef
-
-define Package/asterisk18-mod-res-fax/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-fax-spandsp/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-mgcp/conffiles
-/etc/asterisk/mgcp.conf
-endef
-
-define Package/asterisk18-mod-chan-mgcp/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-skinny/conffiles
-/etc/asterisk/skinny.conf
-endef
-
-define Package/asterisk18-mod-chan-skinny/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-brcm/conffiles
-/etc/asterisk/brcm.conf
-endef
-
-define Package/asterisk18-mod-chan-brcm/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-curl/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-transfer/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-softhangup/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-mysql/conffiles
-/etc/asterisk/app_mysql.conf
-/etc/asterisk/res_config_mysql.conf
-/etc/asterisk/cdr_mysql.conf
-endef
-
-define Package/asterisk18-mod-mysql/install
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-chan-lantiq/conffiles
-/etc/asterisk/lantiq.conf
-endef
-
-define Package/asterisk18-mod-chan-lantiq/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_DIR) $(1)/etc/asterisk
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-srtp/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-res-stun/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Package/asterisk18-mod-app-queue/install
-	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
-endef
-
-define Buildasterisk18-modModuleTemplate
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))
-  $$(call Package/asterisk18-mod/Default)
-    TITLE:=$(2) support
-    DEPENDS:= asterisk18-mod $(4)
-  endef
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))/description
-  $$(call Package/asterisk18-mod/Default/description)
-    This package provides support $(3) in Asterisk.
-  endef
-
-  define Package/asterisk18-mod-$(subst _,-,$(1))/install
-	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
-  endef
-
-  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
-endef
-
-$(eval $(call BuildPackage,asterisk18-mod))
-$(eval $(call BuildPackage,asterisk18-mod-voicemail))
-$(eval $(call BuildPackage,asterisk18-mod-sounds))
-$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
-$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
-$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
-$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
-$(eval $(call BuildPackage,asterisk18-mod-cdr))
-$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
-$(eval $(call BuildPackage,asterisk18-mod-res-voice))
-$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
-$(eval $(call BuildPackage,asterisk18-mod-res-fax))
-$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
-$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
-$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
-$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
-$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
-$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
-$(eval $(call BuildPackage,asterisk18-mod-curl))
-$(eval $(call BuildPackage,asterisk18-mod-mysql))
-$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
-$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
-$(eval $(call BuildPackage,asterisk18-mod-res-stun))
-$(eval $(call BuildPackage,asterisk18-mod-app-queue))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
-$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
-$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
-$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
-$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
-$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
-$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
-$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -1,4 +0,0 @@
-## startup options for /etc/init.d/asterisk
-
-ENABLE_ASTERISK="yes"
-OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ "$INTERFACE" == "$bindintf" ] || exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	bindaddr="${bindaddr:-0.0.0.0}"
-	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
-fi
-

asterisk-1.8.x-mod/files/asterisk.init

@@ -1,55 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=10
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions/network.sh
-USE_PROCD=1
-NAME=asterisk
-PROG=/usr/sbin/asterisk
-DEFAULT=/etc/default/asterisk
-CONFDIR=/etc/asterisk
-
-init_asterisk() {
-	[ -f $DEFAULT ] && . $DEFAULT
-	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
-	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
-        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
-
-        # does the board have a fxs relay?
-        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
-        if [ "$fxsRelayGpio" != "" ]; then
-                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
-        fi
-}
-
-service_triggers() {
-        procd_add_reload_trigger voice_client
-}
-
-start_service() {
-	init_asterisk
-
-	procd_open_instance
-	procd_set_param command "$PROG" -f
-	procd_set_param respawn
-	procd_close_instance
-#	service_start /usr/sbin/asterisk
-}
-
-reload_service() {
-	asterisk -rx "config reload $CONFDIR/sip.conf"
-	asterisk -rx "core reload"
-	asterisk -rx "dialplan reload"
-	asterisk -rx "brcm reload"
-}
-
-restart() {
-	reload
-}
-
-stop_service() {
-        service_stop /usr/sbin/asterisk
-}
-

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -0,0 +1,65 @@
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bashdb
+PKG_VERSION:=4.4-0.92
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
+PKG_SOURCE_URL:=@SF/bashdb/
+PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
+#PKG_CAT:=zcat
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Bash script debugging utility.
+  URL:=http://sourceforge.net/projects/bashdb/
+endef
+
+define Package/$(PKG_NAME)/description
+  Bash script debugging utility.
+endef
+
+define Build/Compile
+        $(MAKE) -C $(PKG_BUILD_DIR) \
+                $(TARGET_CONFIGURE_OPTS) \
+                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
+                        -I./src" \
+                LIBS="$(TARGET_LDFLAGS)" \
+                DESTDIR="$(PKG_INSTALL_DIR)"
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/share
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
+
+	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
+endef
+
+$(eval $(call BuildPackage,bashdb))

bbf/Config_bbfdm.in

@@ -0,0 +1,37 @@
+if PACKAGE_libbbfdm
+
+menu "Configuration"
+
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
+	default y
+
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
+config BBF_TR181
+	bool "Enable TR-181 Data Model Support"
+	default y
+
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
+config BBF_TR143
+	bool "Enable TR-143 Data Model Support"
+	default y
+
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default n
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default n
+endmenu
+endif

bbf/Makefile

@@ -0,0 +1,139 @@
+#
+# Copyright (C) 2021 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.4.27
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=710485a57e311a5b4c5434efe3e79fc58cb6c429
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for libbbfdm API
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
+define Package/libbbfdm
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CONFIGURE_ARGS += \
+	--enable-tr104
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
+
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-json-plugin
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-shared-library
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
+endef
+
+define Package/libbbfdm/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+endef
+
+define Package/libbbfdm/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))

bbk_cli/Makefile

@@ -0,0 +1,42 @@
+#
+# Copright (C) 2018 The Internet Foundation In Sweden
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bbk_cli
+PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bbk_cli
+	CATEGORY:=Utilities
+	DEPENDS:=+libpthread +libstdcpp
+	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
+endef
+
+define Package/bbk_cli/description
+	To measure connection speed in an environment that is missing a web browser, 
+	for example, in a server, you can use our command line interface bbk_cli, 
+	which is available for some of the most common operating systems.
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
+endef
+
+define Package/bbk_cli/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
+endef
+
+$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -0,0 +1,25 @@
+diff --git a/src/framework/engine.h b/src/framework/engine.h
+index 57a48ad..9e1bc36 100644
+--- a/src/framework/engine.h
++++ b/src/framework/engine.h
+@@ -10,6 +10,7 @@
+ #include <map>
+ #include <vector>
+ #include <string>
++#include <sys/select.h>
+ 
+ #include "logger.h"
+ 
+diff --git a/src/framework/mk.inc b/src/framework/mk.inc
+index 793e211..13275be 100644
+--- a/src/framework/mk.inc
++++ b/src/framework/mk.inc
+@@ -7,7 +7,7 @@ OS:=$(shell uname)
+ CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
+ 
+ ifeq ($(OS),Linux)
+-CXX = g++
++CXX = $(CROSS_COMPILE)g++
+ endif
+ 
+ ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,6 +18,9 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

bulkdata/Makefile

@@ -0,0 +1,50 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulkdata
+PKG_VERSION:=1.0.3
+
+PKG_SOURCE_VERSION:=b35e7862bc17fc11dc1f757c7b93900995a28633
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	BBF BulkData Collection
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -0,0 +1,43 @@
+
+config bulkdata 'bulkdata'
+	option enable '0'
+	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
+	option log_level '3'
+
+config profile
+	option profile_id '1'
+	option enable '0'
+	option name ''
+	option nbre_of_retained_failed_reports '0'
+	option protocol 'http'
+	option encoding_type ''
+	option reporting_interval '86400'
+	option time_reference '0'
+	option csv_encoding_field_separator ','
+	option csv_encoding_row_separator '
'
+	option csv_encoding_escape_character '"'
+	option csv_encoding_report_format 'column'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_format 'objecthierarchy'
+	option json_encoding_report_time_stamp 'unix'
+	option http_url ''
+	option http_username ''
+	option http_password ''
+	option http_compression 'none'
+	option http_method 'post'
+	option http_use_date_header '1'
+	option http_retry_enable '0'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+	option http_persist_across_reboot '0'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+

bulkdata/files/etc/init.d/bulkdatad

@@ -0,0 +1,34 @@
+#!/bin/sh /etc/rc.common
+# Bulkdata Software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+
+START=99
+STOP=10
+
+USE_PROCD=1
+PROG="/usr/sbin/bulkdatad"
+
+start_service() {
+	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
+	if [ "$bulkdata_enable" = "1" ]; then
+		procd_open_instance
+		procd_set_param command "$PROG"
+		procd_set_param respawn "3" "7" "0"
+		procd_close_instance
+	fi
+}
+
+boot() {
+	start
+}
+
+reload_service() {
+	stop
+	start 
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger bulkdata
+}

bulut/Makefile

@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulut
+PKG_VERSION:=0.2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
+PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bulut
+	CATEGORY:=Utilities
+	DEPENDS:=
+	TITLE:=bulut
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include
+
+define Package/bulut/description
+	obuspa keys
+endef
+
+define Package/bulut/install
+	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,bulut))

catv/Makefile

@@ -1,9 +1,19 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,7 +1,4 @@
 #!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2015 inteno.org
-#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -1,9 +1,18 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=crashlog
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
 
 include $(INCLUDE_DIR)/package.mk
 

crashlog/files/etc/init.d/crashlog

@@ -4,16 +4,15 @@ START=99
 
 send_log()
 {
-	nr=$(db get hw.board.serialNumber)
-	hw=$(db get hw.board.hardware)
-	hwv=$(db get hw.board.hardwareVersion)
-	bid=$(db get hw.board.boardId)
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
 	sw=$(db get hw.board.iopVersion)
 	server=$(/sbin/uci get system.crashlog.server)
 
 	while true
 	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
 	    if [ $? == 0 ]
 	    then
 	       break;
@@ -28,7 +27,7 @@ fill_in_default()
     /sbin/uci add system log
     /sbin/uci rename system.@log[-1]=crashlog
     /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crash.inteno.se"
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
     /sbin/uci commit
 }
 

crashlog/files/sbin/logcore

@@ -20,7 +20,7 @@ fill_in_default()
     /sbin/uci add system log
     /sbin/uci rename system.@log[-1]=corelog
     /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="crash.inteno.se"
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
     /sbin/uci commit
 }
 
@@ -50,12 +50,11 @@ cat >$TMP_CORE
 # more memory to work with. normally this would do nothing.
 cat >/dev/null
 
-nr=$(db get hw.board.serialNumber)
-hw=$(db get hw.board.hardware)
-hwv=$(db get hw.board.hardwareVersion)
-bid=$(db get hw.board.boardId)
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
 sw=$(db get hw.board.iopVersion)
 
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
 rm $TMP_CORE
 

crashlog/readme

@@ -24,7 +24,7 @@ What we need is the public key for the clients.
 For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
 
 ----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
 ----------
 
 The public key should be just one line. Add that line to the 

dectmngr/Config.in

@@ -0,0 +1,11 @@
+if PACKAGE_dectmngr
+
+menu "Configuration"
+
+config ENABLE_LINE_SETTINGS_EXTENSION
+	bool "Enable Line Settings List extension "
+	default y
+
+endmenu
+
+endif

dectmngr/Makefile

@@ -1,23 +1,25 @@
 #
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2021 IOPSYS Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-
 include $(TOPDIR)/rules.mk
 
-PKG_RELEASE:=1
-PKG_VERSION:=1.0.23
-PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
 PKG_NAME:=dectmngr
+PKG_RELEASE:=3
+PKG_VERSION:=3.5.1
 
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=ef9d4c6124d0ca66f048f3d678d9a25f13aa4207
+PKG_MIRROR_HASH:=skip
+endif
 
-LDFLAGS+= \
-        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
 export BUILD_DIR
@@ -25,42 +27,47 @@ export BUILD_DIR
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/dectmngr
-  CATEGORY:=Utilities
-  TITLE:=Broadcom endpoint test application
-  URL:=
-  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+ 	TITLE:=DECT Manager
+	DEPENDS:= +libubox +ubus +uci +libxml2
 endef
 
-define Package/dectmngr/description
-	Dect proxy, manager and tools
+define Package/$(PKG_NAME)/description
+	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
 endef
 
-
-define Package/dectmngr/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-
-	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
-	cp files/etc/init.d/* $(1)/etc/init.d/
-	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
-	cp files/etc/dect/* $(1)/etc/dect/
-	cp files/etc/config/* $(1)/etc/config/
-	cp files/sbin/dectreg $(1)/sbin/
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config.in"
 endef
 
-$(eval $(call BuildPackage,dectmngr))
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-Wall \
+	-I$(STAGING_DIR)/usr/include/libxml2
+
+ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
+TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
+endif
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/dectmngr
+	$(CP) ./files/etc/* $(1)/etc/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +1,3 @@
-config dect 'dect'
-	option 'radio' 'auto'
-
+config dect 'global'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-if [ "$ACTION" == "led_blink" ]; then
-    ubus call led.dect set '{"state":"notice"}'
-fi
-
-if [ "$ACTION" == "led_on" ]; then
-    ubus call led.dect set '{"state":"ok"}'
-fi
-
-if [ "$ACTION" == "led_off" ]; then
-    ubus call led.dect set '{"state":"off"}'
-fi
-
-

dectmngr/files/etc/init.d/dect

@@ -1,60 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=97
-STOP=10
-USE_PROCD=1
-
-DEST=
-DEFAULT=
-OPTIONS=""
-
-
-start_service() {
-	# avoid fp timing problem
-	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
-	
-	# setup board specific dect parameters
-	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
-	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
-	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
-	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
-	case "$DECTANTDIV" in
-		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
-		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
-		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
-	esac
-
-	if [ ! -f /etc/dect/nvs ]; then
-		cp /etc/dect/nvs_default /etc/dect/nvs
-		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
-		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
-		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
-		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
-		fsync /etc/dect/nvs
-	fi
-	
-	# init dectproxy
-	dectproxy > /dev/null 2>&1 &
-	dectmngr > /tmp/dectmngr 2>&1 &
-}
-
-stop_service() {
-        killall -9 dectproxy
-	killall -9 dectmngr
-}
-
-restart_service() {
-	echo "restarting dect"
-	killall dectmngr
-	dectmngr > /tmp/dectmngr 2>&1 &
-}
-
-reload_service() {
-	# reload config
-	dect -c
-}
-
-service_triggers() {
-        procd_add_reload_trigger dect
-}
-

dectmngr/files/etc/init.d/dectmngr

@@ -0,0 +1,96 @@
+#!/bin/sh /etc/rc.common
+
+source /lib/functions/uci-defaults.sh
+
+START=70
+STOP=12
+
+USE_PROCD=1
+NAME=dectmngr
+PROG=/usr/sbin/dectmngr
+LOG_PATH=/var/log/dectmngr
+DB_PATH=/etc/dect
+
+# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
+stop_and_wait_dectmngr() {
+	pidof $NAME && killall -q $NAME
+
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
+		sleep 1
+	done
+}
+
+start_service() {
+	local opt_ext=
+	local rfpi=
+	local model_id=
+	local rxtun=
+
+	test $(db get hw.board.hasDect) = "0" && return
+
+	echo 1 > /sys/class/gpio/gpio14/value
+
+	rfpi=$(db -q get hw.board.dect_rfpi)
+	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
+
+	model_id=$(db -q get hw.board.dect_model_id)
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
+		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
+		model_id="30.3B.06"
+	}
+	opt_ext="$opt_ext -model $model_id"
+
+	rxtun=$(db -q get hw.board.dect_rxtun)
+	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+
+	config_load dect
+	config_get log_dect_cmbs global log_dect_cmbs syslog
+
+	procd_open_instance
+	if [ "$log_dect_cmbs" = "none" ]; then
+		echo "Starting dectmngr with cmbs logging disabled"
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
+		rm -f $LOG_PATH/*
+	elif [ "$log_dect_cmbs" = "file" ]; then
+		echo "Starting dectmngr with cmbs logging enabled to file"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
+		echo "Starting dectmngr with cmbs logging enabled to syslog"
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
+		rm -f $LOG_PATH/*
+	fi
+
+	procd_set_param respawn 6 2 3
+	procd_set_param term_timeout 20
+	procd_set_param triggers asterisk
+	procd_close_instance
+}
+
+stop_service() {
+	test $(db get hw.board.hasDect) = "0" && return
+
+	echo 0 > /sys/class/gpio/gpio14/value
+	stop_and_wait_dectmngr
+}
+
+reload_service() {
+	ubus call dect reload
+}
+
+service_triggers()
+{
+	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
+	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+}
+
+boot() {
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
+
+	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
+	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
+	start
+}
+

dectmngr/files/lib/upgrade/keep.d/dect

@@ -0,0 +1 @@
+/etc/dect/LA_DB

dectmngr/files/sbin/dectreg

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# This script is likely not used. Just exit with
-# an error and see if someone screems... If not,
-# we can delete this file.
-exit 1
-
-
-[ -f /var/dectisregistering ] || {
-	touch /var/dectisregistering 2>/dev/null
-	/usr/bin/dectmngr -r
-	ubus call led.dect  set '{"state" : "notice"}'
-	sleep 20
-	rm /var/dectisregistering 2>/dev/null
-	/usr/bin/dectmngr -s
-	ubus call led.dect  set '{"state" : "ok"}'
-}

dectmngr2/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=1.1.0
-PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=17aa3b1d8d372ebcf4d37379f7cc4fb59c461d4b
-PKG_NAME:=dectmngr2
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dectmngr2
-  CATEGORY:=Utilities
-  TITLE:=Dectmngr2
-  URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
-endef
-
-define Package/dectmngr2/description
-	Dectmngr2
-endef
-
-
-define Package/dectmngr2/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
-	$(CP) ./files/dect.config $(1)/etc/config/dect
-endef
-
-$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

dslmngr/Makefile

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dslmngr
+PKG_VERSION:=1.1.2
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+define Package/dslmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=XDSL status and configration utility
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
+endef
+
+define Package/dslmngr/description
+ This package can be used to configure and provide status about
+ the XDSL subsystem through UBUS.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(STAGING_DIR)/usr/include/xdsl \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/Compile
+	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
+endef
+
+define Package/dslmngr/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dslmngr))

easy-qos/Makefile

@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,8 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+        commit firewall
+EOT

easy-soc-events/Makefile

@@ -0,0 +1,110 @@
+# All rights reserved.
+# See LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=easy-soc-events
+PKG_VERSION:=1.1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
+PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+
+include $(INCLUDE_DIR)/package.mk
+
+-include $(TOPDIR)/.config
+
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
+  LINUX_VERSION := 4.1.52
+  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
+  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
+  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
+  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
+  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
+endif
+
+
+define KernelPackage/easy-soc-events/default
+  SUBMENU:=Other modules
+endef
+
+define KernelPackage/easy-soc-events
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Helper module for netlink event notification
+  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
+  AUTOLOAD:=$(call AutoLoad,11,easyevent)
+endef
+
+define KernelPackage/easy-soc-events-test
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Test module for event notification through easyevent
+  DEPENDS+=+kmod-easy-soc-events
+  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
+endef
+
+
+define KernelPackage/easy-soc-events/description
+  This is a helper module to generate and pass netlink events from
+  kernel to user applications.
+endef
+
+#NOSTDINC_FLAGS :=
+
+ifdef CONFIG_PACKAGE_kmod-easy-soc-events
+  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
+endif
+
+LINUXINCLUDE += \
+		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
+		-Iarch/$(LINUX_KARCH)/include \
+		-Iarch/$(LINUX_KARCH)/include/generated \
+		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
+		-I$(LINUX_DIR)/include/generated/uapi \
+		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
+		-include ./include/linux/kconfig.h
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+endef
+
+define Build/Compile
+	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) V=1 \
+		$(PKG_MAKE_FLAGS) \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		LINUXINCLUDE="$(LINUXINCLUDE)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		modules
+endef
+
+
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+define KernelPackage/easy-soc-events/install-extra
+	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
+endef
+endif
+
+define KernelPackage/easy-soc-events/install
+	$(call KernelPackage/easy-soc-events/install-extra)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
+	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
+endef
+
+$(eval $(call KernelPackage,easy-soc-events-test))
+$(eval $(call KernelPackage,easy-soc-events))

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,128 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=6.4.40
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=699744d5ae9e043715c260f9b58bbc18747895f9
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

endptcfg/Makefile

@@ -1,92 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=endptcfg
-PKG_VERSION:=0.2
-
-PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptcfg-open
-else
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
-PKG_SOURCE_PROTO:=git
-endif
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-LDFLAGS+= \
-		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
-		-Wl,-rpath-link=$(STAGING_DIR)/lib
-
-BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-export BCMKERNEL_DIR
-
-TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
-			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
-			-lpthread
-
-TARGET_CFLAGS += -DFAKE_SSP
-
-RSTRIP:=true
-export BUILD_DIR
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptcfg
-  CATEGORY:=Utilities
-  TITLE:=Broadcom endpoint driver configuration application
-  URL:=
-  DEPENDS:=+libpthread bcmkernel
-endef
-
-define Package/endptcfg/description
-	Broadcom endpoint driver configuration application
-endef
-
-define Package/endptcfg/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq ($(CONFIG_ENDPT_OPEN),y)
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
-			-I$(LINUX_DIR)/include \
-			-I$(STAGING_DIR)/usr/include \
-			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
-			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
-			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
-endef
-else
-define Build/Compile
-endef
-endif
-
-define Package/endptcfg/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,endptcfg))

endptmngr/Makefile

@@ -0,0 +1,65 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=3a71d4124061287783e0d4c763b1b20e925d2133
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=MIT
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom Voice Endpoint Manager
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2020 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ethmngr
+PKG_VERSION:=2.0.1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ethmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Ethernet status and configration utility
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+endef
+
+define Package/ethmngr/description
+ This package can be used to configure and provide status about
+ the ethernet interfaces and ports through UBUS.
+ It uses APIs from the libethernet.so library.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+define Package/ethmngr/install
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,ethmngr))

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

eventlog/Makefile

@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))

fatrace/Makefile

@@ -0,0 +1,61 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v3.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=fatrace
+PKG_VERSION:=0.12
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-3.0
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fatrace
+	CATEGORY:=Utilities
+	TITLE:=Report system wide file access events
+	URL:=
+	DEPENDS	:= +@KERNEL_FANOTIFY
+endef
+
+define Package/fatrace/description
+	Report system wide file access events.
+endef
+
+MAKE_INSTALL_FLAGS += PREFIX="/" 
+
+define Package/fatrace/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
+#	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,fatrace))
+
+

fatrace/patches/001-fix-O_LARGEFILE.patch

@@ -0,0 +1,14 @@
+diff --git a/fatrace.c b/fatrace.c
+index 1c0899a..b7d1560 100644
+--- a/fatrace.c
++++ b/fatrace.c
+@@ -44,7 +44,8 @@
+  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
+  * O_LARGEFILE is usually 0, so hardcode it here
+  */
+-#define KERNEL_O_LARGEFILE 00100000
++//#define KERNEL_O_LARGEFILE 00100000
++#define KERNEL_O_LARGEFILE O_LARGEFILE
+ 
+ /* command line options */
+ static char* option_output = NULL;

fatrace/patches/002-fflush.patch

@@ -0,0 +1,12 @@
+diff --git a/fatrace.c b/fatrace.c
+index b7d1560..6179272 100644
+--- a/fatrace.c
++++ b/fatrace.c
+@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
+         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
+     }
+     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
++    fflush(stdout);
+ }
+ 
+ /**

fdtextract/Makefile

@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fdtextract
+PKG_RELEASE:=1
+PKG_VERSION:=1.0
+
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=7e013f0afa68378d38a6bdc9b0c5a342bd3dd0a5
+PKG_MIRROR_HASH:=skip
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+	TITLE:=fdtextract
+	DEPENDS:= +libfdt
+endef
+
+define Package/$(PKG_NAME)/description
+	Command to extract sub images from FIT images.
+endef
+
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/fdtextract
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

gigaset-elements/.gitignore

@@ -1,3 +0,0 @@
-
-git-src
-

gigaset-elements/Makefile

@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-

gryphon-led-module/Makefile

@@ -0,0 +1,78 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gryphon-led-kernel-module
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/$(PKG_NAME)
+  SUBMENU:=LED modules
+  TITLE:=LED driver for Gryphon
+  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
+  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
+  PKG_LICENSE:=GPLv2
+  PKG_LICENSE_URL:=
+endef
+
+define KernelPackage/$(PKG_NAME)/description
+  This package contains the LED driver for Gryphon devices.
+endef
+
+EXTRA_KCONFIG:= CONFIG_RGB_LED=m
+
+MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
+
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	MODULES_SUBDIR:=lib/modules/4.19.183
+	TARGET_CROSS:=$(CONFIG_BCM_TOOLCHAIN)/bin/$(CONFIG_BCM_TOOLTUPLE)
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=/opt/toolchains/crosstools-aarch64-gcc-9.2-linux-4.19-glibc-2.30-binutils-2.32/bin/aarch64-buildroot-linux-gnu-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) src/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
+		modules
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+endef
+
+$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -0,0 +1,26 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+MODULE_NAME  = gryphon-led-kernel-module
+
+obj-m  := $(MODULE_NAME).o
+
+GENEXIS_FILES= \
+	main.o \
+	sk9822.o \
+	sk9822_bitbang.o
+
+$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+#include "sk9822.h"
+
+#define DRIVER_NAME			"canyon_led"
+#define DRIVER_AUTHOR		"Genexis B.V."
+#define DRIVER_DESC			"Canyon LED driver for SK9822"
+#define DRIVER_VERSION	"1"
+
+/**
+ * sysfs interfaces
+ */
+
+static ssize_t get_led_color(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set complete LED strip to a specific color
+ * @retval count number of bytes written
+ * @retval -EMSGSIZE if the message is too big
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_color(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	size_t buflen = count;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	/* strip newline */
+	if ((count > 0) && (buf[count-1] == '\n')) {
+		buflen--;
+	}
+
+	if (buflen != 6) { // RRGGBB\0
+		return -EMSGSIZE;
+	}
+
+	// Update the LED array here
+	ret = sk9822_set_color_str(sk9822, buf);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set led color\n");
+		return -EIO;
+	}
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
+
+static ssize_t get_led_brightness(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set LED brightness
+ * @retval count number of bytes written
+ * @retval -EINVAL if the message is not a valid hexadecimal number
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_brightness(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	if (kstrtoul(buf, 16, &val)) {
+		return -EINVAL;
+	}
+
+	if(val > SK9822_DEFAULT_BRIGHTNESS) {
+		val = SK9822_DEFAULT_BRIGHTNESS;
+	}
+
+	sk9822->led_brightness = (uint8_t)val;
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
+
+
+static struct attribute *sk9822_dev_attrs[] = {
+	 &dev_attr_led_color.attr,
+	 &dev_attr_led_brightness.attr,
+	 NULL
+};
+
+static struct attribute_group sk9822_dev_attr_group = {
+	.name = "sk9822",
+	.attrs = sk9822_dev_attrs,
+};
+
+/**
+ * device prope and removal
+ */
+
+static int canyon_led_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sk9822_leds *leds;
+
+	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds) {
+		return -ENOMEM;
+	}
+	leds->dev = &pdev->dev;
+	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
+
+	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Could not read led-count property\n");
+		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	} else {
+		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
+	}
+
+	leds->led_colors = devm_kzalloc(&pdev->dev,
+			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
+	if (!leds->led_colors) {
+		return -ENOMEM;
+	}
+
+
+	platform_set_drvdata(pdev, leds);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	}
+
+	gpiod_direction_output(leds->clock_gpio, 1);
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	} else {
+		printk(KERN_INFO "Got clock gpio\n");
+		gpiod_set_value(leds->clock_gpio, 0);
+	}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	}
+
+	gpiod_direction_output(leds->data_gpio, 1);
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	} else {
+		printk(KERN_INFO "Got data gpio\n");
+		gpiod_set_value(leds->data_gpio, 0);
+	}
+
+	printk(KERN_INFO "Attempt to set filefs stuff\n");
+	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+
+#if 0
+	printk(KERN_INFO "Flash LEDs to verify they work\n");
+	sk9822_set_color_str(leds, "00FF00");
+	sk9822_update(leds);
+	msleep(200);
+	sk9822_set_color_str(leds, "000000");
+	sk9822_update(leds);
+#endif
+
+	printk(KERN_INFO "canyon led successfully probed\n");
+
+	return 0;
+}
+
+static int canyon_led_remove(struct platform_device *pdev)
+{
+	struct sk9822_leds *leds;
+
+	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+
+	leds = platform_get_drvdata(pdev);
+	if (IS_ERR(leds)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -1;
+	}
+
+	if (leds->clock_gpio) {
+		gpiod_put(leds->clock_gpio);
+	}
+
+	if (leds->data_gpio) {
+		gpiod_put(leds->data_gpio);
+	}
+
+	printk(KERN_NOTICE "Bye, bye\n");
+
+	return 0;
+}
+
+/**
+ * platform driver metadata
+ */
+
+static const struct of_device_id canyon_led_of_ids[] = {
+	{ .compatible = "canyon,led" },
+	{ }
+};
+
+static struct platform_driver canyon_led = {
+	.probe = &canyon_led_probe,
+	.remove = &canyon_led_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = canyon_led_of_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
+module_platform_driver(canyon_led);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+#include "sk9822_bitbang.h"
+
+cRGB __hexs_to_rgb(const char *hex)
+{
+	cRGB rgb;
+	int r, g, b;
+
+	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
+	// This needs sanity checking
+	rgb.r = r;
+	rgb.g = g;
+	rgb.b = b;
+	return rgb;
+}
+
+/**
+ * @brief update the color over the given device struct to the provided HEX color
+ */
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
+{
+	int i;
+	cRGB color = __hexs_to_rgb(hex);
+
+	for (i = 0; i < sk9822->led_count; i++) {
+		sk9822->led_colors[i] = color;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief write device struct to the device
+ */
+int sk9822_update(struct sk9822_leds *sk9822)
+{
+	uint16_t i;
+	uint16_t led_count = sk9822->led_count;
+
+	// Start Frame
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+
+	for (i = 0; i < led_count; i++) {
+		cRGB *p = &sk9822->led_colors[i];
+		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
+		sk9822_bb_write(sk9822, p->b);
+		sk9822_bb_write(sk9822, p->g);
+		sk9822_bb_write(sk9822, p->r);
+	}
+
+	// End frame
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+
+	return 0;
+}

gryphon-led-module/src/sk9822.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef SK9822_H_
+#define SK9822_H_
+
+#include <linux/types.h>
+
+#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
+#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+
+typedef struct {
+	uint8_t b;
+	uint8_t g;
+	uint8_t r;
+} cRGB;   // BGR (SK9822 Standard)
+
+struct sk9822_leds {
+	struct device *dev;
+	struct gpio_desc *clock_gpio;
+	struct gpio_desc *data_gpio;
+
+	cRGB *led_colors;
+	uint8_t led_brightness;
+	uint16_t led_count;
+};
+
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
+int sk9822_update(struct sk9822_leds *sk9822);
+
+#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+/**
+ * @brief Bitbang write operation CLOCK+DATA
+ *
+ * Assumed state before call: CLOCK- Low, DATA- High
+ */
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8 ; i++) {
+		if (!(c&0x80)) {
+			gpiod_set_value(sk9822->data_gpio, 0); // set data low
+		} else {
+			gpiod_set_value(sk9822->data_gpio, 1); // set data high
+		}
+
+		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
+		c <<= 1;
+		udelay(1); // stretch clock
+		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
+	}
+
+	// State after call: SCK Low, Data high
+}

gryphon-led-module/src/sk9822_bitbang.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _SK9822_BB_H_
+#define _SK9822_BB_H_
+
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
+
+#endif /* _SK9822_BB_H_ */

ice-client/Config.in

@@ -1,4 +0,0 @@
-
-config ICE_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

ice-client/files/ice-client.uci_default

@@ -1,63 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	local password="$(db get hw.board.wpaKey)"
-	if [ -n "$password" ]; then
-		adduser -D -H -s /bin/false ice
-		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
-	fi
-}
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-EOF
-}
-
-exit 0
-

icgroupd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2016 Inteno Broadband AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=icgroupd
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Inteno Broadband AB
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/icgroupd
-  SECTION:=base
-  CATEGORY:=Base system
-  TITLE:=Inteno cgroup daemon
-  DEPENDS:=+uci +busybox
-endef
-
-define Package/icgroupd/description
-	This package contains Intenos cgroup daemon and associated
-	configuration and startup scripts.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/icgroupd/install
-	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
-
-	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
-	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
-	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,icgroupd))
-

icgroupd/files/cgroupd

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-CGBASEDIR=$1
-CGCONFIG=$2
-[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
-
-[ -r /lib/functions.sh ] || exit 1
-. /lib/functions.sh
-
-CGPROCMAP=/tmp/cgprocmap
-CGPERIOD=3s
-
-DBGLOG=/tmp/cgroupd.log
-DEBUG=0
-
-
-add_to_procmap () {
-	local name_grp=$1
-	local name grp
-
-	name=$(echo $name_grp |awk -F= '{print $1}')
-	grp=$(echo $name_grp |awk -F= '{print $2}')
-
-	echo "($name) $grp" >> $CGPROCMAP
-}
-
-# Read configuration file and create process:group look-up table
-# in /tmp file
-read_config () {
-	local enab
-
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && exit 1
-
-	config_get CGDEFGROUP cgroups defgroup "_undef_"
-	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
-	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
-
-	echo -n '' > $CGPROCMAP
-	config_list_foreach procmap procmap add_to_procmap
-	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
-}
-
-# Move all process except init from cgroup root to cgroups according
-# to /tmp look-up table
-move_wild_procs () {
-	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
-	local pid name grp
-
-	for pid in $wild_procs; do
-
-		[ $pid -eq 1 ] && continue
-		if [ -d /proc/$pid ]; then
-
-			name=$(awk '{print $2}' /proc/$pid/stat)
-			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
-
-			[ "$grp" == "." ] && continue
-			[ -n "$grp" ] || grp=$CGDEFGROUP
-
-			[ "$DEBUG" == "1" ] && \
-			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
-			echo $pid > $CGBASEDIR/$grp/cgroup.procs
-		fi
-	done
-}
-
-
-[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-read_config
-while true; do
-	move_wild_procs
-	sleep $CGPERIOD
-done

icgroupd/files/cgroups.config

@@ -1,48 +0,0 @@
-config cgroups cgroups
-	option enabled 1
-	option defgroup iopsys/normal
-
-config cgroup _root_
-#	list option cpu.rt_runtime_us=50000
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=40000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=30000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=2500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=7500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config procmap procmap
-	list procmap kthreadd=.
-	list procmap minidlna=3prt/normal
-

icgroupd/files/cgroups.init

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-USE_PROCD=1
-PROCD_DEBUG=1
-NAME=cgroupd
-
-CGBASEDIR=/sys/fs/cgroup
-CGCONFIG="cgroups"
-
-DBGLOG=/tmp/cginit.log
-DEBUG=0
-
-
-cgroupinit_set_knob_value () {
-	local knob_val=$1
-	local dir=$2
-	local knob val
-
-	knob=$(echo $knob_val |awk -F= '{print $1}')
-	val=$(echo $knob_val |awk -F= '{print $2}')
-	/bin/echo $val > $CGBASEDIR/$dir/$knob
-	[ "$DEBUG" == "1" ] && \
-	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
-}
-
-cgroupinit_create_group () {
-	local cgrp=$1
-	local dir
-
-	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
-	if [ "$cgrp" == "_root_" ]; then
-		dir=.
-	else
-		dir=$(echo $cgrp |tr '_' '/')
-
-		if [ ! -d $CGBASEDIR/$dir ]; then
-			mkdir $CGBASEDIR/$dir
-			[ "$DEBUG" == "1" ] && \
-			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
-		fi
-	fi
-
-	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
-}
-
-cgroupinit_configure_cgroups () {
-	local enab defgrp
-
-	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && return 1
-
-	config_get defgrp cgroups defgroup "_undef_"
-	[ "$defgrp" == "_undef_" ] && return 1
-
-	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
-		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
-		[ $? -eq 0 ] || return 1
-	fi
-
-	config_foreach cgroupinit_create_group cgroup
-	return 0
-}
-
-start_service () {
-	cgroupinit_configure_cgroups
-	[ $? -eq 0 ] || return
-
-	procd_open_instance
-	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service () {
-	local cgdir procs prc
-
-	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
-		procs=$(cat $cgdir/cgroup.procs)
-		for prc in $procs; do
-			echo $prc > $CGBASEDIR/cgroup.procs
-		done
-		rmdir $cgdir
-	done
-}
-
-service_triggers() {
-        procd_add_reload_trigger $CGCONFIG
-}
-

icwmp/Config.in

@@ -1,47 +0,0 @@
-if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
-
-config CWMP_SCRIPTS_FULL
-	bool "Install all icwmp scripts"
-	default y
-
-choice
-	prompt "Select ACS sever"
-	default CWMP_ACS_MULTI
-
-config CWMP_ACS_MULTI
-	bool "No specific ACS, follow standard"
-
-config CWMP_ACS_HDM
-	bool "HDM"
-endchoice
-
-choice
-	prompt "Select Data Model"
-	default tr098
-
-config DATAMODEL_TR098
-	bool "TR-098"
-
-config DATAMODEL_TR181
-	bool "TR-181"
-endchoice
-
-config CWMP_DEBUG
-	bool "Compile with debug options"
-	default y
-
-choice
-	prompt "enable xmpp feature"
-	default disable
-
-config XMPP_DISABLE
-	bool "disable"
-
-config XMPP_ENABLE
-	bool "enable"
-endchoice
-config CWMP_DEVEL_DEBUG
-	bool "Compile with development debug options"
-	default n
-
-endif

icwmp/Config_cwmp.in

@@ -0,0 +1,24 @@
+if PACKAGE_icwmp
+
+menu "Configuration"
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+endmenu
+endif
+

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2012 OpenWrt.org
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,15 +8,18 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-01-30
+PKG_VERSION:=8.2.27
 PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3cd337122a6f66355ca973aea2be305db1621bdb
+PKG_SOURCE_VERSION:=da88c8c28656b2db54ab205d26faccda68546c05
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
@@ -24,39 +27,24 @@ PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_DEBUG \
 	CONFIG_CWMP_DEVEL_DEBUG
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
-
-CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/icwmp/Default
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
+  SUBMENU:=TRx69
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
 endef
 
-define Package/icwmp/description
+define Package/$(PKG_NAME)/description
  A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-curl
-  $(call Package/icwmp/Default)
-  TITLE+= (using libcurl)
-  DEPENDS+= +libcurl
-  VARIANT:=curl
-endef
-
-define Package/icwmp-zstream
-  $(call Package/icwmp/Default)
-  TITLE+= (using libzstream)
-  DEPENDS+= +libzstream
-  VARIANT:=zstream
-endef
-
-define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config.in"
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -67,38 +55,8 @@ endef
 endif
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifneq ($(CWMP_REVISION)_,_)
-ifneq ($(CWMP_REVISION),exported)
-ifneq ($(CWMP_REVISION),Unversioned directory)
-TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-endif
-endif
-endif
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
-CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
-
-ifeq ($(BUILD_VARIANT),zstream)
-CONFIGURE_ARGS += \
-	--enable-http=zstream \
-	--with-zstream-include-path=$(STAGING_DIR)/usr/include
-endif
-
-ifeq ($(BUILD_VARIANT),curl)
-CONFIGURE_ARGS += \
-	--enable-http=curl
-endif
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
 
 ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
 CONFIGURE_ARGS += \
@@ -120,47 +78,22 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-define Package/icwmp-$(BUILD_VARIANT)/install
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
-ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
-	$(INSTALL_DIR) $(1)/usr/share/icwmp
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
-	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
-endif
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
+	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/95-icwmp-generate-ssl $(1)/etc/uci-defaults/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
+	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
 endef
 
-define Package/icwmp-$(BUILD_VARIANT)/postinst
-	#!/bin/sh
-	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Enabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd enable
-	fi
-	exit 0
-endef
-
-define Package/icwmp-$(BUILD_VARIANT)/prerm
-	#!/bin/sh
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Disabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd disable
-	fi
-	exit 0
-endef
-
-
-$(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,icwmp-zstream))
+$(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/README

@@ -1,136 +0,0 @@
-1)Build
-    Requirements<74>:
-	librairies:
-	- libuci.so
-	- libexpat.so
-	- libcurl.so
-	- libpthread.so
-	- libopenssl.so
-	- libz.so
-	- libcrypto.so
-	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-	
-	header files and folders:
-	- expat.h
-	- expat_external.h
-	- uci.h
-	- uci_config.h
-	- zlib.h
-	- curl folder
-	- openssl folder
-	the header files and folders should be present in the staging_dir/target-i386_uClibc-0.9.30.1/usr/include/ or staging_dir/toolchain-i386_gcc-4.1.2_uClibc-0.9.30.1/usr/include/
-
-
-if a librairie doesn't exist:
- 	a- run make menuconfig and select the librarie
-	b- build the librarie package
-
-2) Build
-
-this software is composed of 3 packages:
-- icwmp package:  contains icwmpd daemon
-- cwmp lib package: contains cwmplib and contains cwmp_value_change binary. They could be used by other user space applications in order to notify the icwmp daemon when paramter changes
-- cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
-
-The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile 
-
-3) OpenWRT settings
-in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
- uci_set_state provisioning iup tr069url "$url"
- uci_set_state provisioning iup provisioningcode "$provisioningcode"
-
-4) Run
-    Requirements:
-	- libuci package should be installed
-	- libexpat package should be installed
-	- libcurl package should be installed
-	- libpthread package should be installed
-	- libopenssl package should be installed
-	- libz package should be installed
-	- libcrypto package should be installed
-    
-    Configure the acs url in the /etc/config/icwmp
-    and then start the cwmpd service: /etc/init.d/icwmpd start
-    for the help: /etc/init.d/icwmpd
-
-5) Value Change
-
-5.1) value change for user space applications (using the libcwmp)
-
-Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
-The libcwmp should be installed uin the OpenWRT firmware
-
-example of using libcwmp
-in myapplication.c
-
-#...
-#include <cwmp_lib.h>
-#...
-
-int anyfunction ()
-{
-   .....
-   /* parameter change here  */
-   /* so we inform the icwmp: */
-   lib_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
-   .....
-/*
-Description of lib_api_cwmp_value_change_call input parameters
- parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
- parameter 2 : is the parameter path
- parameter 3 : is the first correspondence related to the first indice
- parameter 4 : is the second correspondence related to the second indice
-   .
-   .
-   .
- parameter n : is the (n-2) correspondence related to the (n-2) indice
-*/
-
-}
-
-5.2) value change for user space applications (using the cwmp_value_change CLI)
-
-Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
-The libcwmp should be installed uin the OpenWRT firmware
-
-in OpenWRT:
-
-root@OpenWrt:~# cwmp_value_change InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress "lan2" "3"
-
-in this case the command will force cwmp client to send a notification to the ACS (if and only if the parameter path as configured as active or as passive parameter using the setAttributeParameter method)
-
-5.3) value change for kernel space modules
-Before using the cwmp kernel module for value change, we should check that the kernel module package is selected in "make menu config". and we should check that the package is compiled.
-The kernel module should be installed uin the OpenWRT firmware and should be insert before all other kernel modules
-
-example of using cwmp kernel module
-in mykernelmodule.c
-
-#...
-#include <linux/cwmp_kernel.h>
-#...
-
-int anykernelfunction ()
-{
-   .....
-   /* parameter change here  */
-   /* so we inform the cwmp: */
-   kernel_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
-   .....
-/*
-Description of lib_api_cwmp_value_change_call input parameters
- parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
- parameter 2 : is the parameter path
- parameter 3 : is the first correspondence related to the first indice
- parameter 4 : is the second correspondence related to the second indice
-   .
-   .
-   .
- parameter n : is the (n-2) correspondence related to the (n-2) indice
-*/
-
-}
-
-
-

icwmp/files/etc/config/cwmp

@@ -0,0 +1,45 @@
+config acs 'acs'
+	option userid '' #$OUI-$SER
+	option passwd 'iopsys'
+	option periodic_inform_enable 'true'
+	option periodic_inform_interval '1800'
+	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option dhcp_discovery 'enable'
+	# compression possible configs: GZIP, Deflate, Disabled
+	option compression 'Disabled'
+	#­ possible configs interval :[1:65535]
+	option retry_min_wait_interval '5'
+	#­ possible configs interval :[1000:65535]
+	option retry_interval_multiplier '2000'
+	option https_ssl_capath ''
+	option ipv6_enable '0'
+	option ip_version '4'
+
+config cpe 'cpe'
+	option interface 'eth0.1'
+	option default_wan_interface 'wan'
+	option log_to_console 'disable'
+	option log_to_file 'enable'
+	# log_severity: INFO (Default)	
+	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
+	option log_severity 'INFO'
+	option log_file_name '/var/log/icwmpd.log'
+	option log_max_size '102400'
+	option userid '' #$OUI-$SER
+	option passwd 'iopsys'
+	option port '7547'
+	option provisioning_code ''
+	option amd_version '5'
+	# compression possible configs: InstanceNumber, InstanceAlias
+	option instance_mode 'InstanceNumber'
+	option session_timeout '60'
+	option notification '1'
+	option exec_download '0'
+	option periodic_notify_enable '1'
+	option periodic_notify_interval '10'
+	option incoming_rule 'Port_Only'
+	
+config lwn 'lwn'
+	option enable '1'
+	option hostname ''
+	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+#created by the icwmp package
+log() {
+	echo "${@}"|logger -t firewall.cwmp -p info
+}
+
+if [ ! -f "/var/state/cwmp" ]; then
+	touch "/var/state/cwmp"
+	exit 0;
+fi
+
+zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
+port=$(uci -q get cwmp.cpe.port)
+ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
+
+if [ -z "${zone_name}" ]; then
+	log "empty firewall zone name"
+	exit 0
+elif [ "$zone_name" = "icwmp" ]; then
+	iptables -nL zone_icwmp_input 2> /dev/null
+	if [ $? != 0 ]; then
+		iptables -w 1 -N zone_icwmp_input
+		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	else			
+		iptables -w 1 -F zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	fi			
+else
+	iptables -w 1 -F zone_icwmp_input 2> /dev/null
+	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -w 1 -X zone_icwmp_input 2> /dev/null
+fi
+
+cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
+cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
+
+# default incoming rule is Port only
+if [ -z "${incoming_rule}" ]; then
+	incoming_rule="port_only"
+fi
+
+if [ "${incoming_rule}" = "ip_only" ]; then
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+elif [ "${incoming_rule}" = "port_only" ]; then
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+else
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+fi
+
+echo ${cmd}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd}
+fi
+
+echo ${cmd6}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd6}
+fi
+
+uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit cwmp

icwmp/files/etc/icwmpd/update.sh

@@ -0,0 +1,43 @@
+#!/bin/sh
+
+log() {
+	echo $@ |logger -t cwmp.update -p info
+}
+
+handle_icwmp_update() {
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local vendorspecinf=`ifstatus ${defwan} | jsonfilter -e "@.data.vendorspecinf"`
+
+	log "Handling dhcp option value ${vendorspecinf}"
+	[ -n "$vendorspecinf" ] && {
+		local url=""
+		local old_url="$(uci -q get cwmp.acs.dhcp_url)"
+
+		case $vendorspecinf in
+			http://*|https://*)
+					url="${vendorspecinf}"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo $optval | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+
+		if [ -n "$url" ]; then
+			log "## icwmp url[${old_url}] changed to [${url}]"
+			if [ "${url}" != "${old_url}" ]; then
+				log "Restarting icwmp url[${old_url}] changed to [${url}]"
+				uci -q set cwmp.acs.dhcp_url="$url"
+				uci commit cwmp
+				ubus call uci commit '{"config":"cwmp"}'
+			fi
+		fi
+	}
+}
+
+handle_icwmp_update

icwmp/files/etc/init.d/icwmpd

@@ -0,0 +1,272 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2015-2019 iopsys Software Solutions AB
+
+. /lib/functions.sh
+include /lib/network
+. /usr/share/libubox/jshn.sh
+
+START=99
+STOP=2
+
+USE_PROCD=1
+PROG="/usr/sbin/icwmpd"
+
+log() {
+	echo "${@}"|logger -t cwmp.init -p info
+}
+
+enable_dhcp_option43() {
+	local wan="${1}"
+
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local newreqopts=""
+	local option43_present=0
+
+	for ropt in $reqopts; do
+		case $ropt in
+			43) option43_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	if [ ${option43_present} -eq 1 ]; then
+		return;
+	fi
+
+	newreqopts="$reqopts 43"
+	if [ $proto == "dhcp" ]; then
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+		ubus call network reload
+	fi
+}
+
+wait_for_resolvfile() {
+	local time=$1
+	local tm=1
+
+	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
+	[ -n "$resolvfile" ] || return
+
+	while [ ! -f $resolvfile ]; do
+		sleep 1
+		[ $tm -ge $time ] && break
+		tm=$((tm+1))
+	done
+}
+
+set_wan_interface() {
+	local wan_interface="${1}"
+	local l3_device=""
+
+	if [ -z "${wan_interface}" ]; then
+		return 0;
+	fi
+
+	json_load "$(ifstatus ${wan_interface})"
+	json_get_var l3_device l3_device
+	if [ -n "$l3_device" ]; then
+		uci -q set cwmp.cpe.interface="${l3_device}"
+		uci -q commit cwmp
+	fi
+}
+
+copy_cwmp_etc_files_to_varstate() {
+	if [ ! -f /var/state/cwmp ]
+	then
+		if [ -f /etc/icwmpd/cwmp ]
+		then
+			uci -q -c /etc/icwmpd delete cwmp.acs
+			uci -q -c /etc/icwmpd commit cwmp
+			cp /etc/icwmpd/cwmp /var/state/cwmp
+		else
+			touch /var/state/cwmp
+		fi
+	fi
+
+	mkdir -p /var/run/icwmpd
+	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]
+	then
+		mv /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd 2>/dev/null
+	fi
+	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]
+	then
+		mv /etc/icwmpd/dm_enabled_notify /var/run/icwmpd 2>/dev/null
+	fi
+}
+
+copy_cwmp_varstate_files_to_etc() {
+	if [ -f /var/state/cwmp ]
+	then
+		cp /var/state/cwmp /etc/icwmpd 2>/dev/null
+	fi
+	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]
+	then
+		cp /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd 2>/dev/null
+	fi
+	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]
+	then
+		cp /var/run/icwmpd/dm_enabled_notify /etc/icwmpd 2>/dev/null
+	fi
+}
+
+validate_acs_section()
+{
+	uci_validate_section cwmp acs "acs" \
+		'passwd:string' \
+		'periodic_inform_enable:bool' \
+		'periodic_inform_interval:uinteger' \
+		'periodic_inform_time:string' \
+		'url:string' \
+		'dhcp_url:string' \
+		'compression:or("GZIP","Deflate","Disabled")' \
+		'retry_min_wait_interval:range(1, 65535)' \
+		'retry_interval_multiplier:range(1000, 65535)' \
+		'https_ssl_capath:file' \
+		'ipv6_enable:bool'
+
+}
+
+validate_cpe_section()
+{
+	uci_validate_section cwmp cpe "cpe" \
+		'interface:string' \
+		'default_wan_interface:string' \
+		'log_to_console:or("enable","disable")' \
+		'log_to_file:or("enable","disable")' \
+		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
+		'log_file_name:string' \
+		'log_max_size:uinteger' \
+		'userid:string' \
+		'passwd:string' \
+		'port:uinteger' \
+		'provisioning_code:string:""' \
+		'amd_version:range(1, 6)' \
+		'instance_mode:or("InstanceNumber","InstanceAlias")' \
+		'session_timeout:uinteger' \
+		'notification:bool' \
+		'exec_download:bool' \
+		'periodic_notify_enable:bool' \
+		'enable:bool' \
+		'periodic_notify_interval:uinteger'
+}
+
+validate_defaults() {
+	config_load cwmp
+
+	validate_acs_section || {
+		log "Validation of acs section failed"
+		return 1;
+	}
+
+	[ -z "${url}" -a -z "${dhcp_url}" ] && {
+		log "ACS url is empty can't start"
+		return 1;
+	}
+
+	validate_cpe_section || {
+		log "Validation of cpe section failed"
+		return 1;
+	}
+
+	[ -z "${default_wan_interface}" ] && {
+		log "Wan interface is empty"
+		return 1;
+	}
+
+	return 0;
+}
+
+boot() {
+	local dhcp_url=""
+	local discovery="1"
+
+	config_load cwmp
+	config_get_bool dhcp_discovery acs dhcp_discovery 1
+	config_get dhcp_url acs dhcp_url ""
+
+	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
+		if [ -z "${dhcp_url}" ]; then
+			log "dhcp discovery enabled but no dhcp url, trigger update"
+			/etc/icwmpd/update.sh
+		fi
+	fi
+	start
+}
+
+start_service() {
+	local enable_cwmp
+	local wan_interface
+	local dhcp_discovery
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+	config_get dhcp_discovery acs dhcp_discovery
+	config_get wan_interface cpe default_wan_interface "wan"
+
+	if [ "$enable_cwmp" = "0" -o "$enable_cwmp" = "false" ]; then
+		log "CWMP is not enabled"
+		return 0
+	fi
+
+	# Set wan interface if not configured
+	set_wan_interface "${wan_interface}"
+
+	# Set dhcp option 43 if dhcp discovery enabled
+	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
+		enable_dhcp_option43 "${wan_interface}"
+	fi
+
+	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+
+	# Copy backup data so that if it restart latter on it gets the info
+	copy_cwmp_etc_files_to_varstate
+
+	validate_defaults || {
+		log "Validation of defaults failed"
+		return 1;
+	}
+
+	procd_open_instance icwmp
+	procd_set_param command "$PROG"
+	procd_append_param command -b
+	procd_set_param respawn \
+		${respawn_threshold:-5} \
+		${respawn_timeout:-10} ${respawn_retry:-3}
+
+	procd_set_param watch network.interface
+	procd_close_instance
+}
+
+stop_service()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
+reload_service() {
+	log "Restarting CWMP client"
+	stop
+	start
+}
+
+service_triggers() {
+       procd_add_reload_trigger "cwmp"
+
+       procd_open_trigger
+               json_add_array
+                       json_add_string "" "interface.update"
+                       json_add_array
+                               json_add_array
+                                       json_add_string "" "run_script"
+                                       json_add_string "" "/etc/icwmpd/update.sh"
+                               json_close_array
+                       json_close_array
+                       json_add_int "" "2000"
+               json_close_array
+       procd_close_trigger
+}
+

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -0,0 +1,32 @@
+# Copy defaults by the factory to the cwmp UCI user section.
+
+# Get Manufacturer OUI.
+oui=$(uci -q get cwmp.cpe.manufacturer_oui)
+if [ -z "${oui}" ]; then
+	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
+fi
+
+oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+# Get system serial number.
+serial=$(uci -q get cwmp.cpe.serial_number)
+if [ -z "${serial}" ]; then
+	serial=$(db -q get device.deviceinfo.SerialNumber)
+fi
+
+# Get userid values
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
+
+# Only set if they are empty
+if [ -z "$acs_userid" ]
+then
+    uci -q set cwmp.acs.userid="${oui}-${serial}"
+fi
+
+if [ -z "$cpe_userid" ]
+then
+    uci -q set cwmp.cpe.userid="${oui}-${serial}"
+fi
+
+# No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-cwmpfirewall

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+uci -q batch <<-EOT
+        delete firewall.cwmp
+        set firewall.cwmp=include
+        set firewall.cwmp.path=/etc/firewall.cwmp
+        set firewall.cwmp.reload=1
+        commit firewall
+EOT
+
+exit 0
+

icwmp/files/etc/uci-defaults/95-icwmp-generate-ssl

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+regenerate_ssl_link(){
+	[ ! -d "/etc/ssl/certs" ] && return 0;
+	[ ! -f "/etc/ssl/certs/*.pem" ] && return 0;
+
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -0,0 +1 @@
+/var/run/icwmpd/icwmpd_backup_session.xml

ieee1905/Config.in

@@ -0,0 +1,14 @@
+if (PACKAGE_ieee1905)
+
+menu "Configurations"
+
+config IEEE1905_EXTENSION_ALLOWED
+	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
+	default y
+
+config IEEE1905_PLATFORM_HAS_WIFI
+	bool "Platform has WiFi"
+	default y if PACKAGE_libwifi
+
+endmenu
+endif

ieee1905/Config.map-plugin.in

@@ -0,0 +1,14 @@
+if (PACKAGE_map-plugin)
+
+menu "Configurations"
+
+config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
+	bool "Sync configuration between dynamic controllers in the network"
+	default n
+
+config MULTIAP_FUZZ_1905_CMDUS
+	bool "Include support to fuzz 1905 CMDUs for testing purpose"
+	default n
+
+endmenu
+endif

ieee1905/Makefile

@@ -0,0 +1,150 @@
+#
+# Copyright (C) 2021 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ieee1905
+PKG_VERSION:=4.6.19
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=7267a76fafa264792415a1cdc697a9e47934a1e6
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+
+define Package/ieee1905/Default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=IEEE-1905.1 stack
+endef
+
+define Package/ieee1905/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libieee1905
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= (library for CMDU and TLV handling)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +libopenssl
+endef
+
+define Package/ieee1905
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ubus +libpthread \
+	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
+endef
+
+
+define Package/map-plugin
+$(call Package/ieee1905/Default,$(1))
+  TITLE:=Multi-AP (Easymesh) plugin
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/map-plugin/config
+  source "$(SOURCE)/Config.map-plugin.in"
+endef
+
+define Package/ieee1905/description
+ This package provides IEEE Std 1905.1 stack.
+endef
+
+define Package/libieee1905/description
+ This package provides library functions for IEEE Std 1905.1 stack.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-D_GNU_SOURCE
+
+ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
+TARGET_CFLAGS += -DHAS_WIFI
+endif
+
+ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
+TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
+endif
+
+
+MAKE_PATH:=src
+
+
+define Package/ieee1905/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
+endef
+
+define Package/libieee1905/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+endef
+
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+
+define Build/InstallDev/libieee1905
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+endef
+
+define Build/InstallDev
+	$(call Build/InstallDev/libieee1905,$(1),$(2))
+	$(call Build/InstallDev/map-plugin,$(1),$(2))
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+$(eval $(call BuildPackage,ieee1905))
+$(eval $(call BuildPackage,libieee1905))
+$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -0,0 +1,22 @@
+config ieee1905 'ieee1905'
+	option enabled '1'
+	option extension '1'
+	list extmodule 'map'
+	option registrar '2 5'
+
+config ap
+	option band '2'
+	option ssid 'TestSSID.2'
+	option encryption 'psk2'
+	option key '5555500000'
+
+config ap
+	option band '5'
+	option ssid 'TestSSID.5'
+	option encryption 'psk2'
+	option key '2222200000'
+
+config al-iface
+	option enabled 1
+	option ifname 'br-lan'
+	option type 'bridge'