Delete trailing white spaces

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.3.0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a5c94b289c79bc3a635b8d742dd9b73dcc0615f
+PKG_SOURCE_VERSION:=637aa9ef231f81d195f7a1b67c70af445ade7fee
 PKG_NAME:=dectmngr2
 
 

dslmngr/Makefile

@@ -13,7 +13,7 @@ PKG_VERSION:=1.0.0
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7522faab4142fe2c0ac8cbf71bb0cc5bd49f0750
+PKG_SOURCE_VERSION:=be5b0d0c0a1c2abd335aaf19f01f63284d8cc285
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 endif

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,5 +1,7 @@
 #!/bin/sh /etc/rc.common
 
+. /lib/functions/iopsys-repeated-macs.sh
+
 START=99
 USE_PROCD=1
 
@@ -89,6 +91,31 @@ create_rule() {
 	exec_log ebtables -t broute -A BROUTING ${cmd}
 }
 
+create_rules() {
+	protocol=$1; shift
+	macaddr=$1; shift
+	prio_num=$1; shift
+	port=$1
+
+	for p in $port; do
+		if [ "$protocol" == "none" ]; then
+			create_rule tcp $macaddr $prio_num $p
+			create_rule udp $macaddr $prio_num $p
+		else
+			create_rule $protocol $macaddr $prio_num $p
+		fi
+	done
+	# Create rule for all ports if port is not mentioned in uci
+	if [ -z "$port" ]; then
+		if [ "$protocol" == "none" ]; then
+			create_rule tcp $macaddr $prio_num
+			create_rule udp $macaddr $prio_num
+		else
+			create_rule $protocol $macaddr $prio_num
+		fi
+	fi
+}
+
 manage_rule() {
 	local cfg="$1"
 	local priority macaddr proto port comment prio_num protocol
@@ -100,25 +127,15 @@ manage_rule() {
 
 	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
+	[ -n "${macaddr}" -a -n "${prio_num}" ] || return
+
+	create_rules ${protocol} ${macaddr} ${prio_num} ${port}
+	repeated_macs=$(mac_to_repeated ${macaddr})
+	for mac in $repeated_macs; do
+		[ "$mac" = "${macaddr}" ] && continue
+		create_rules ${protocol} $mac ${prio_num} ${port}
+	done
+
 }
 
 reload_service() {

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -85,7 +85,7 @@ get_ipaddress() {
 	json_get_keys keys
 
 	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
+	json_select "${1//:/_}"
 	json_get_var ip ip
 
 	echo "$ip"
@@ -103,18 +103,18 @@ validate_rule_section()
 
 # Clear existing rules before applying new rules
 clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	local rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	while [ -n "${rule}" ]; do
 		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+		rule=$(iptables -t mangle -S OUTPUT|grep -m 1 MARK |sed 's/-A/-D/1')
 	done
 }
 
 check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	iptables -t mangle -C OUTPUT ${@} 2>/dev/null
 	# Create rule if not exists
 	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
+		exec_log iptables -t mangle -A OUTPUT ${@}
 	else
 		log "Rule exists for ${@}"
 	fi

easy-soc-libs/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.14
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=76a0b60abe97499e4fe83bffd5fd698ba8b336bc
+PKG_SOURCE_VERSION:=f6deba973cba01d630fdc40c6e97c384b07e3df5
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

endptmngr/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
 PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=ef49d57c3824df4dfb4921d39461e2bd14f918a7
+PKG_SOURCE_VERSION:=bafc4f9e81de567965a0d8f2897d390cfb14636b
 
 
 ifeq ($(CONFIG_ENDPT_OPEN),y)
@@ -17,9 +17,8 @@ BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=endptmngr-open
-PATCH_DIR:=
 else
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_NAME:=endptmngr

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/files/ice-client.uci_default

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+grep -rq "^ice:" /etc/passwd || {
+	adduser -D -H -s /bin/false ice
+}
+
+uci -q delete passwords.ice
+uci -q set passwords.ice=usertype
+uci -q set passwords.ice.password="\$WPAKEY"
+uci -q del_list passwords.ice._access_w=root
+uci -q add_list passwords.ice._access_w=root
+uci -q del_list passwords.ice._access_r=root
+uci -q add_list passwords.ice._access_r=root
+uci -q commit passwords
+
+uci show rpcd | grep username=.*ice.* >/dev/null || {
+cat >> /etc/config/rpcd << EOF
+
+config login
+	option username 'ice'
+	option password '\$p\$ice'
+	list _access_w 'none'
+	list write 'user-user'
+	list write 'juci-broadcom-dsl'
+	list write 'juci-broadcom-dsl-admin'
+	list write 'juci-broadcom-ethernet'
+	list write 'juci-broadcom-iptv'
+	list write 'juci-broadcom-vlan'
+	list write 'juci-broadcom-vlan-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
+	list write 'juci-catv'
+	list write 'juci-ddns'
+	list write 'juci-diagnostics'
+	list write 'juci-dnsmasq-dhcp'
+	list write 'juci-dropbear'
+	list write 'juci-ethernet'
+	list write 'juci-event'
+	list write 'juci-firewall-fw3'
+	list write 'juci-iconnect'
+	list write 'juci-igmpinfo'
+	list write 'juci-inteno-backup'
+	list write 'juci-inteno-multiwan'
+	list write 'juci-inteno-provisioning'
+	list write 'juci-inteno-qos'
+	list write 'juci-inteno-voice-client'
+	list write 'juci-minidlna'
+	list write 'juci-mod-status'
+	list write 'juci-mod-system'
+	list write 'juci-natalie-dect'
+	list write 'juci-netmode'
+	list write 'juci-network-netifd'
+	list write 'juci-owsd'
+	list write 'juci-printer'
+	list write 'juci-realtime-graphs'
+	list write 'juci-samba'
+	list write 'juci-sfp'
+	list write 'juci-snmpd'
+	list write 'juci-sysupgrade'
+	list write 'juci-uhttpd'
+	list write 'juci-upnp'
+	list write 'juci-usb'
+	list write 'core'
+	list write 'unauthenticated'
+
+EOF
+}
+
+uci -q del_list dhcp.@domain[0].name="inteno.lan"
+uci -q add_list dhcp.@domain[0].name="inteno.lan"
+uci -q commit dhcp
+
+exit 0
+

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-11-19
+PKG_VERSION:=4.0-2019-05-08
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7491e611712afb6ebf88098a099b25ef8c2f0a8b
+PKG_SOURCE_VERSION:=da50b98f5b0a9539edf97b3ffda4bf5a030dfa18
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -215,7 +215,6 @@ define Package/icwmp_xmpp/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-	$(CP) ./xmpp-files/* $(1)/
 endef
 
 define Package/icwmp_udpechoserver/install

icwmp/README

@@ -9,7 +9,7 @@
 	- libz.so
 	- libcrypto.so
 	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-	
+
 	header files and folders:
 	- expat.h
 	- expat_external.h
@@ -33,7 +33,7 @@ this software is composed of 3 packages:
 - cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
 
 The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile 
+To compile the three packages: $ make package/cwmpd/compile
 
 3) OpenWRT settings
 in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
@@ -49,7 +49,7 @@ in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script
 	- libopenssl package should be installed
 	- libz package should be installed
 	- libcrypto package should be installed
-    
+
     Configure the acs url in the /etc/config/icwmp
     and then start the cwmpd service: /etc/init.d/icwmpd start
     for the help: /etc/init.d/icwmpd

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -41,14 +41,4 @@ set_cwmp_reqopts() {
 	fi
 }
 
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
 set_cwmp_reqopts
-regenerate_ssl_link

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -1,21 +0,0 @@
-#!/bin/sh
-
-[ -f /etc/config/cwmp_xmpp ] || exit 0
-
-[ "$ACTION" == "ifup" ] || exit 0
-[ "$INTERFACE" == "loopback" ] && exit 0
-
-local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-local islan="$(uci -q get network.$INTERFACE.is_lan)"
-[ "$islan" == "1" ] && exit 0
-
-local proto="$(uci -q get network.$INTERFACE.proto)"
-[ "$proto" == "none" ] && exit 0
-
-local ifname="$(uci -q get network.$INTERFACE.ifname)"
-[ "${ifname:0:1}" == "@" ] && exit 0
-
-/etc/init.d/icwmp_xmppd reload &
-

ifbt/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifbt
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=295262590c00e0e6683a51d28f6107b4678ebb8c
+PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=53ca7f58edb87976b5897ccaf487bb0cbbf39d07
+PKG_SOURCE_VERSION:=665a72a6bb2b5ea5a17ad6248957fe35525b3782
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 

iop/config

@@ -188,5 +188,5 @@ CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="http://download.iopsys.eu/iopsys/mirror/"
+LOCAL_MIRROR="http://download.iopsys.eu/iopsys/mirror/"
 

iop/scripts/genconfig.sh

@@ -1,7 +1,6 @@
 #!/bin/bash
 
 function genconfig {
-	export OPENSDK=0
 	export CLEAN=0
 	export IMPORT=1
 	export SRCTREEOVERR=0
@@ -12,7 +11,6 @@ function genconfig {
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
-	#always use the mirror
 	export DEVELOPER=0
 	target="bogus"
 	config_path=""
@@ -25,16 +23,6 @@ function genconfig {
 	Color_Off='\033[0m'       # Text Reset
 	Yellow='\033[0;33m'       # Yellow
 
-	bcmAllowed=0
-	iceAllowed=0
-	endptAllowed=0
-	natalieAllowed=0
-	mediatekAllowed=0
-	wifilifeAllowed=0
-	defaultConsumerAllowed=0
-	baseURL=""
-
-
 	function find_last {
 	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
 	}
@@ -93,6 +81,7 @@ function genconfig {
 	set_target() {
 	    local profile=$1
 
+
 		[ -e $brcm63xx_mips/genconfig ] &&
 			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
 		[ -e $brcm63xx_arm/genconfig ] &&
@@ -146,6 +135,24 @@ function genconfig {
 
 	}
 
+	git remote -v | grep -q http || {
+		DEVELOPER=1
+
+		bcmAllowed=0
+		iceAllowed=0
+		endptAllowed=0
+		natalieAllowed=0
+		mediatekAllowed=0
+		wifilifeAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:mediatek/linux.git -q 2>/dev/null && mediatekAllowed=1
+		git ls-remote git@dev.iopsys.eu:dialog/natalie-dect-12.26.git -q 2>/dev/null && natalieAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/wifilife.git -q 2>/dev/null && wifilifeAllowed=1
+		git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
+	}
+
 	v() {
 		[ "$VERBOSE" -ge 1 ] && echo "$@"
 	}
@@ -163,7 +170,6 @@ function genconfig {
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
 		echo -e "  -a|--list-all\t\tList all Customers and their board types"
 		echo -e "  -b|--boards\t\tList all board types"
-		echo -e "  -O|--opensdk\t\tUse the iopsysWRT opensdk"
 		echo
 		echo "Example ./iop genconfig dg200 TELIA"
 		echo "(if no customerconfig is chosen, iopsys config will be used)"
@@ -226,18 +232,17 @@ function genconfig {
 
 	setup_dirs()
 	{
-
-		if [[ !  -z  $CUSTREPO  ]]; then
-			if git ls-remote $CUSTREPO -q 2>/dev/null; then
-				if [ ! -d "$CUSTPATH" ]; then
-					git clone "$CUSTREPO" "$CUSTPATH"
-				elif [ $IMPORT -eq 1 ]; then
-					cd $CUSTPATH
-					v "git pull"
-					git pull
-					cd - >/dev/null #go back
-				fi
+		if git ls-remote $CUSTREPO -q 2>/dev/null; then
+			if [ ! -d "$CUSTPATH" ]; then
+				git clone "$CUSTREPO" "$CUSTPATH"
+			elif [ $IMPORT -eq 1 ]; then
+				cd $CUSTPATH
+				v "git pull"
+				git pull
+				cd - >/dev/null #go back
 			fi
+		else
+			echo "You do not have access to $CUSTREPO"
 		fi
 
 		if [ ! -d "$FILEDIR" ]; then
@@ -413,7 +418,6 @@ function genconfig {
 		while [ -n "$1" ]; do
 			case "$1" in
 
-			-O|--opensdk) export OPENSDK=1;;
 			-c|--clean) export CLEAN=1;;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
@@ -435,37 +439,7 @@ function genconfig {
 			shift;
 		done
 
-		#Check if you should have public or private access
-		DEVELOPER=1
-
-		if git remote -v | grep -q http; then
-			baseURL="https://dev.iopsys.eu/"
-			DEVELOPER=0
-		else
-			baseURL="git@dev.iopsys.eu:"
-		fi
-
-		if [[ $OPENSDK -eq 0 ]] ; then
-			git ls-remote $"${baseURL}consumer/iopsys.git" -q 2>/dev/null && defaultConsumerAllowed=1
-
-			git ls-remote $"${baseURL}broadcom/bcmcreator.git" -q 2>/dev/null && bcmAllowed=1
-			git ls-remote $"${baseURL}mediatek/linux.git" -q 2>/dev/null && mediatekAllowed=1
-			git ls-remote $"${baseURL}dialog/natalie-dect-12.26.git" -q 2>/dev/null && natalieAllowed=1
-			git ls-remote $"${baseURL}iopsys/endptmngr.git" -q 2>/dev/null && endptAllowed=1
-			git ls-remote $"${baseURL}iopsys/wifilife.git" -q 2>/dev/null && wifilifeAllowed=1
-			git ls-remote git@private.inteno.se:ice-client.git -q -q 2>/dev/null && iceAllowed=1
-
-			if [[ $defaultConsumerAllowed -eq 1 ]] && [[ $baseURL == *"git@"* ]]
-				then
-					CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
-			elif [[ $defaultConsumerAllowed -eq 1 ]] && [[ $baseURL ==  *"https"* ]] 
-				then
-					CUSTREPO="${CUSTREPO:-https://dev.iopsys.eu/consumer/iopsys.git}"
-			else
-					CUSTREPO="${CUSTREPO:-}"
-			fi
-		fi
-		echo "custrepo: $CUSTREPO"
+		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
 
 		setup_dirs
 		create_and_copy_files "$@"

iop/scripts/genconfig_min.sh

@@ -1,378 +0,0 @@
-#!/bin/bash
-
-function genconfig_min {
-	export CLEAN=0
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
-	CUSTPATH="customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	#always use the mirror
-	export DEVELOPER=0
-	target="bogus"
-	config_path=""
-	brcm63xx_mips="target/linux/iopsys-brcm63xx-mips"
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	intel_mips="target/linux/intel_mips"
-
-	Red='\033[0;31m'          # Red
-	Color_Off='\033[0m'       # Text Reset
-	Yellow='\033[0;33m'       # Yellow
-
-	function find_last {
-	    egrep "^[ #]*${1}[ =]" $2 | tail -n1
-	}
-
-	function is_new {
-	    for opt in $conf_warned
-	    do
-		if [ "$opt" == "$1" ]
-		then
-		    return 1
-		fi
-	    done
-	    # option not found return true
-	    return 0
-	}
-
-	function verify_config {
-	    IFS=$'\n'
-	    org=$(<.genconfig.config)
-	    unset IFS
-	    local num
-	    local conf_opt
-	    local conf_org
-	    local conf_new
-
-	    #echo "lines to check $tot_lines"
-	    num=0
-	    for line in $org
-	    do
-		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
-		if [ -n "${conf_opt}" ]
-		then
-		    conf_org=$(find_last ${conf_opt} .genconfig.config)
-		    conf_new=$(find_last ${conf_opt} .config)
-		    if [ "$conf_org" != "$conf_new" ]
-		    then
-			if is_new $conf_opt
-			then
-			    echo -e "config option [${Red}$conf_opt${Color_Off}] is not set correctly in .config"
-			    echo -e "got value [${Yellow}$conf_new${Color_Off}] but wanted [${Yellow}$conf_org${Color_Off}]"
-			    echo "This is a real problem somebody needs to investigate"
-			    echo ""
-			    conf_warned="$conf_warned $conf_opt"
-			fi
-		    else
-			true
-			# for debug to see all options
-			#echo -e "wanted [$conf_org] got [$conf_new]"
-		    fi
-		fi
-		num=$((num+1))
-	    done
-	}
-
-	# Takes a board name and returns the target name in global var $target
-	set_target() {
-	    local profile=$1
-
-		[ -e $brcm63xx_mips/genconfig ] &&
-			iopsys_brcm63xx_mips=$(cd $brcm63xx_mips; ./genconfig)
-		[ -e $brcm63xx_arm/genconfig ] &&
-			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
-		[ -e $ramips/genconfig ] &&
-			iopsys_ramips=$(cd $ramips; ./genconfig)
-		[ -e $intel_mips/genconfig ] &&
-			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
-
-	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips iopsys_intel_mips; do
-				echo "$list based boards:"
-				for b in ${!list}; do
-					echo -e "\t$b"
-				done
-			done
-			return
-	    fi
-
-	    for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_mips"
-			config_path="$brcm63xx_mips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_arm"
-			config_path="$brcm63xx_arm/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-			config_path="$ramips/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_intel_mips; do
-		if [ $p == $profile ]; then
-		    target="intel_mips"
-			config_path="$intel_mips/config"
-		    return
-		fi
-	    done
-
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
-		echo
-		echo -e "  -v|--verbose\t\tVerbose"
-		echo -e "  -s|--override\t\tEnable 'Package source tree override'"
-		echo -e "  -S|--brcmsingle\tForce build of bcmkernel to use only one thread"
-		echo -e "  -h|--help\t\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\t\tList all Customers and their board types"
-		echo -e "  -b|--boards\t\tList all board types"
-		echo
-		echo "Example ./iop genconfig dg400prime IOPSYS"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common )"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common )"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	generate_config()
-	{
-	DIFFFILE="$1"
-	MASTERFILE="$2"
-	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
-	done < $DIFFFILE
-	}
-
-	setup_dirs()
-	{
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
-
-		# Validate seleced board and customers
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
-					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
-				fi
-			done
-		fi
-
-		# Generate base config
-		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
-
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
-		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
-		fi
-
-		#special handling for intel_mips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		else
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-		fi
-
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"		CUSTREPO="${CUSTREPO:-}"
-
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-
-		# Enable Package source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
-
-		if [ -n "$BRCM_MAX_JOBS" ]
-		then
-		    echo "CONFIG_BRCM_MAX_JOBS=\"1\"" >>.config
-		fi
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
-		# Store generated config
-		cp .config .genconfig.config
-
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-
-		verify_config
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
-	fi
-
-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
-	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-S|--brcmsingel) export BRCM_MAX_JOBS=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-b|--boards)set_target LIST;exit 0;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-
-		setup_dirs
-		create_and_copy_files "$@"
-	fi
-}
-
-register_command "genconfig_min" "Generate configuration for customer with manual board configuration"

iop/scripts/generate_tarballs.sh

@@ -59,24 +59,30 @@ build_endptmngr_consumer() {
 	cd "$curdir"
 }
 
+build_ice_consumer() {
+	# create ice-client open version tar file
+	local iceversion icebasever icerelease icecommith
+	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
+	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
+	iceversion=$icebasever$icerelease
+	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
+	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
+	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
+	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
+	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
+	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
+	cd "$curdir"
+}
+
 build_wifilife_consumer() {
-	local target="$1"
 	local ver commit
 	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
 	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
 	[ -n "$ver" -a -n "$commit" ] || return
 	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
-	if [ "$target" == "iopsys-ramips" ]; then
-		cd ./build_dir/target-mipsel_1004kc_musl/wifilife-$ver/ipkg-*
-	elif [ "$target" == "intel_mips" ]; then
-		cd ./build_dir/target-mips_24kc+nomips16_musl/wifilife-$ver/ipkg-*
-	elif [ "$target" == "iopsys-brcm63xx-arm" ]; then
-		cd ./build_dir/target-arm_xscale_musl_eabi/wifilife-$ver/ipkg-*
-	elif [ "$target" == "iopsys-brcm63xx-mips" ]; then
-		cd ./build_dir/target-mips*/wifilife-$ver/ipkg-*
-	else
-		return
-	fi
+	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
 	mkdir -p wifilife-$ver/src
 	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
 	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
@@ -141,7 +147,7 @@ function generate_tarballs {
 	while getopts "t:h" opt; do
 		case $opt in
 			t)
-				sdk_target=${OPTARG}
+				stk_target=${OPTARG}
 				;;
 			h)
 				print_usage
@@ -154,23 +160,23 @@ function generate_tarballs {
 		esac
 	done
 
-	if [ ! -n "$sdk_target" ]; then
+	if [ ! -n "$stk_target" ]; then
 		print_usage
 		exit 1
 	fi
 
-	if [ "$sdk_target" == "broadcom" ]; then
+	if [ "$stk_target" == "broadcom" ]; then
 		build_bcmkernel_consumer
 		build_natalie_consumer
 		build_endptmngr_consumer
-		build_wifilife_consumer "$target"
-	elif [ "$sdk_target" == "mediatek" ]; then
+		build_ice_consumer
+		build_wifilife_consumer
+	elif [ "$stk_target" == "mediatek" ]; then
 		build_mediatek_kernel
-		build_wifilife_consumer "$target"
-	elif [ "$sdk_target" == "intel" ]; then
-		build_wifilife_consumer "$target"
+		build_ice_consumer		
+		build_wifilife_consumer
 	else
-		echo "Invalid target: $sdk_target"
+		echo "Invalid target: $stk_target"
 		print_usage
 		exit 1
 	fi

natalie-dect/Makefile

@@ -18,7 +18,7 @@ PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_NAME:=natalie-dect-open
 else
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=https://dev.iopsys.eu/dialog/natalie-dect-12.26.git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:dialog/natalie-dect-12.26
 PKG_SOURCE_PROTO:=git
 endif
 

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=6406325e72d7ddd0ff7aaa3a87669519021bdb11
+PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/init.d/netmode

@@ -12,7 +12,7 @@ start_netmoded() {
 	procd_open_instance
 	procd_set_param command $NETMODED
 
-	procd_append_param command --verbose warning -i macaddr
+	procd_append_param command --verbose warning
 	procd_set_param stdout 1
 	procd_set_param stderr 1
 

netmode/files/etc/netmodes/bridged/DETAILS

@@ -12,8 +12,7 @@
 		"CG300",
 		"CG301",
 		"EX400",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"acl" : [
 		"admin",

netmode/files/etc/netmodes/bridged/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -44,7 +48,7 @@ config wifi-iface
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
 	option macfilter 'disable'
-	option wps '1'
+	option wps_pushbutton '1'
 	option wmf_bss_enable '1'
 	option maxassoc '32'
 	option ifname 'wl0'
@@ -84,7 +88,7 @@ config wifi-iface
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
 	option macfilter 'disable'
-	option wps '1'
+	option wps_pushbutton '1'
 	option wmf_bss_enable '1'
 	option maxassoc '32'
 	option ifname 'wl1'

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"uplink_band" : 'a',
 	"downlink_band" : 'a b',

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/disable_ubusproxy.sh

@@ -1,2 +0,0 @@
-uci -q set owsd.ubusproxy.enable="0"
-uci -q commit owsd

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -23,7 +27,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	ra0
-	option wps	1
+	option wps_pushbutton	1
 
 config wifi-device  rai0
 	option band a
@@ -42,7 +46,7 @@ config wifi-iface
 	option encryption psk2
 	option key      $WPAKEY
 	option ifname	rai0
-	option wps	1
+	option wps_pushbutton	1
 
 config wifi-iface
 	option device   rai0

netmode/files/etc/netmodes/routed_brcm/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"EX4*",
-		"SDX810-AP",
-		"NORRLAND"
+		"SDX810-AP"
 	],
 	"credentials" : 0
 }

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -44,7 +48,7 @@ config wifi-iface
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
 	option macfilter 'disable'
-	option wps '1'
+	option wps_pushbutton '1'
 	option wmf_bss_enable '1'
 	option maxassoc '32'
 	option ifname 'wl0'
@@ -84,7 +88,7 @@ config wifi-iface
 	option key '$WPAKEY'
 	option gtk_rekey '3600'
 	option macfilter 'disable'
-	option wps '1'
+	option wps_pushbutton '1'
 	option wmf_bss_enable '1'
 	option maxassoc '32'
 	option ifname 'wl1'

netmode/files/etc/netmodes/routed_mtk/DETAILS

@@ -9,8 +9,7 @@
 	],
 	"excluded_boards" : [
 		"*G*",
-		"F*",
-		"NORRLAND"
+		"F*"
 	],
 	"reboot" : 0,
 	"credentials" : 0

netmode/files/etc/netmodes/routed_mtk/omcproxy

@@ -0,0 +1,10 @@
+config proxy
+	option scope global
+	option uplink wan
+	list downlink lan
+
+config proxy
+	option scope global
+	option uplink wan6
+	list downlink lan
+

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -1,5 +1,6 @@
 config wifi-status 'status'
 	option wlan '1'
+	option wps '1'
 	option sched_status '0'
 	option schedule '0'
 
@@ -7,6 +8,9 @@ config bandsteering 'bandsteering'
 	option enabled '0'
 	option policy '0'
 
+config apsteering 'apsteering'
+	option enabled '0'
+
 config wifi-device  ra0
 	option band b
 	option channel  auto
@@ -23,7 +27,7 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pushbutton	1
 	option ifname	ra0
 
 config wifi-device  rai0
@@ -43,6 +47,6 @@ config wifi-iface
 	option ssid     iopsys-$BSSID4
 	option encryption psk2
 	option key      $WPAKEY
-	option wps	1
+	option wps_pushbutton	1
 	option ifname	rai0
 

netmode/files/lib/functions/netmode.sh

@@ -5,7 +5,6 @@
 
 NMTMPDIR=/var/netmodes
 OLD_MODE_FILE=/var/netmodes/old_mode
-CONF_BACKUP_DIR=/var/netmodes/backup/
 SWITCHMODELOCK="/tmp/switching_mode"
 MODEDIR=$(uci -q get netmode.setup.dir)
 MTK=0
@@ -121,13 +120,8 @@ run_netmode_scripts() {
 	local mode=$1
 	local when=$2
 	local script
-	local path
-
-	path=$(readlink -f /etc/netmodes/$mode/)
-	[ "${path:0:14}" == "/etc/netmodes/" ] || exit
-
 	if [ -d /etc/netmodes/$mode/scripts/$when ]; then
-		logger -s -p user.info -t "netmode" "Executing $when netmode scripts" >/dev/console
+		logger -s -p user.info -t $0 "[netmode] Executing $when netmode scripts" >/dev/console
 		for script in $(ls /etc/netmodes/$mode/scripts/$when/); do
 			sh /etc/netmodes/$mode/scripts/$when/$script
 		done
@@ -185,12 +179,7 @@ switch_netmode() {
 
 	run_netmode_scripts $curmode "pre"
 
-	# make backup of current config before switching
-	rm -rf $CONF_BACKUP_DIR
-	mkdir -p $CONF_BACKUP_DIR
-	cp -af /etc/config/* $CONF_BACKUP_DIR
-
-	logger -s -p user.info -t "netmode" "Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
+	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
 
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
@@ -215,10 +204,11 @@ switch_netmode() {
 	case "$curmode" in
 		repeater*)
 			touch $SWITCHMODELOCK
-			logger -s -p user.info -t "netmode" "Switching to $curmode mode" > /dev/console
+			logger -s -p user.info -t $0 "Switching to $curmode mode" > /dev/console
 			ubus call leds set  '{"state" : "allflash"}'
+			[ -f /etc/init.d/omcproxy ] && /etc/init.d/omcproxy stop
+			[ -f /etc/init.d/igmpproxy ] && /etc/init.d/igmpproxy stop
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call network reload
 			wifi reload nodat
 			ubus call router.network reload
@@ -229,7 +219,6 @@ switch_netmode() {
 		;;
 		*)
 			[ -f /etc/init.d/layer2 ] && /etc/init.d/layer2 reload
-			[ -f /etc/init.d/macoffset ] && /etc/init.d/macoffset reload
 			ubus call uci commit '{"config":"network"}'
 		;;
 	esac
@@ -237,27 +226,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "post"
 }
 
-revert_netmode() {
-	local from="$1"
-	local to="$2"
-	local rready="$3"
-
-	ubus call leds set  '{"state" : "allflash"}'
-	logger -s -p user.info -t "netmode" "Could not switch to '$from' mode; going back to '$to' mode" > /dev/console
-	cp -af $CONF_BACKUP_DIR/* /etc/config/
-	sync
-	uci -q set netmode.setup.curmode="$to"
-	uci -q set netmode.setup.repeaterready="$rready"
-	uci commit netmode
-	rm -rf $CONF_BACKUP_DIR
-	rm -rf $OLD_MODE_FILE
-
-	logger -s -p user.info -t "netmode" "Restarting network services" > /dev/console
-	/etc/init.d/network restart
-	ubus call router.network reload
-	ubus call leds set  '{"state" : "normal"}'
-}
-
 wificontrol_takes_over() {
 	local ret
 	[ -f /sbin/wificontrol ] || return
@@ -292,10 +260,10 @@ wait_for_netmode_handler() {
 
 netmode_get_ip_type() {
 	[ -n "$(echo $1 | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ] && {
-		logger -t $0 "netmode_get_ip_type: ip $1 is private"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is private"
 		echo "private"
 	} || {
-		logger -t $0 "netmode_get_ip_type: ip $1 is public"
+		logger -t "[netmode]" "netmode_get_ip_type: ip $1 is public"
 		echo "public"
 	}
 }
@@ -383,7 +351,7 @@ populate_netmodes() {
 	done
 
 	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude support
+	local keys lang desc exp exclude
 	for mode in $(ls $MODEDIR); do
 
 			case "$mode" in
@@ -413,23 +381,6 @@ populate_netmodes() {
 				done
 				json_select ..
 				[ $exclude -eq 1 ] && continue
-			elif json_select supported_boards; then
-				support=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							support=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $support -eq 1 ] || {
-					uci -q delete netmode.$mode
-					continue
-				}
 			fi
 
 			if json_select acl; then

netmode/files/usr/libexec/rpcd/repeater

@@ -3,10 +3,6 @@
 . /usr/share/libubox/jshn.sh
 . /lib/functions.sh
 
-WIFISTA=0
-STACONF="/etc/Wireless/iNIC/iNIC_ap.dat"
-[ -f $STACONF ] && WIFISTA=1
-
 get_if_creds() {
 	local section=$1
 	local network=$2
@@ -88,22 +84,9 @@ duplicate_if_single_radio() {
 	done
 }
 
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
 case "$1" in
 	list)
-		if [ $WIFISTA -eq 1 ]; then
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" }, "connect": { "ssid": "str", "key": "str" }, "forget_network": {}, "wps_enroll": {}, "wps_stop": {} }'
-		else
-			echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
-		fi
+		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str", "from_gui": "str" } }'
 	;;
 	call)
 		case "$2" in
@@ -153,88 +136,6 @@ case "$1" in
 				json_dump
 
 			;;
-			connect)
-				local ssid key enc auth wetif wetcfg wetssid wetkey code
-				read input
-				json_load "$input"
-				json_get_var ssid ssid
-				json_get_var key key
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					wetssid="$(uci -q get $wetcfg.ssid)"
-					wetkey="$(uci -q get $wetcfg.key)"
-					ssid="${ssid:-$wetssid}"
-					key="${key:-$wetkey}"
-					if [ -n "$key" ]; then
-						auth="WPA2PSK"
-						enc="AES"
-					else
-						auth="OPEN"
-						enc="NONE"
-					fi
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set ApCliSsid="$ssid"
-					iwpriv $wetif set ApCliAuthMode="$auth"
-					iwpriv $wetif set ApCliEncrypType="$enc"
-					iwpriv $wetif set ApCliWPAPSK="$key"
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set ApCliAutoConnect=1
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
-			forget_network)
-				local wetif wetcfg code
-				code=1
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -s /sys/class/net/$wetif/operstate ]; then
-					wetcfg="$(get_wifi_iface_cfgstr $wetif)"
-					uci -q set $wetcfg.ssid=""
-					uci -q set $wetcfg.key=""
-					uci -q commit wireless
-
-					sed -i "s/ApCliSsid=.*/ApCliSsid=/g" $STACONF
-					sed -i "s/ApCliAuthMode=.*/ApCliAuthMode=/g" $STACONF
-					sed -i "s/ApCliEncrypType=.*/ApCliEncrypType=/g" $STACONF
-					sed -i "s/ApCliWPAPSK=.*/ApCliWPAPSK=/g" $STACONF
-
-					ifconfig $wetif down
-					ifconfig $wetif up
-
-					code=0
-				fi
-				json_init
-				json_add_int "code" $code
-				json_dump
-			;;
-			wps_enroll)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set ApCliEnable=0
-					iwpriv $wetif set WscConfMode=1
-					iwpriv $wetif set WscMode=2
-					iwpriv $wetif set ApCliEnable=1
-					iwpriv $wetif set WscGetConf=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
-			wps_stop)
-				local wetif
-				[ $WIFISTA -eq 1 ] && wetif="$(uci -q get wireless.$(uci show wireless | grep 'mode=.*wet.*' | cut -d'.' -f2 | head -1).ifname)"
-				if [ -n "$wetif" ]; then
-					iwpriv $wetif set WscStop=1
-				fi
-				json_init
-				json_add_string "ifname" $wetif
-				json_dump
-			;;
 		esac
 	;;
 esac

obuspa/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=obuspa
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=014d7ec63331b3b745e8af53a4be1b52693e2a6f
-PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/obuspa
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=USP agent
-  DEPENDS:=+libcoap +libopenssl +libcurl +libsqlite3 +libcares +libubox +libubus +libblobmsg-json +uspd
-endef
-
-define Package/obuspa/description
- OB-USP-AGENT is a system daemon providing a User Services Platform (USP) Agent.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
-
-ifneq ($(CONFIG_USE_MUSL),)
-TARGET_CFLAGS += -DUSE_MUSL
-endif
-
-#define Build/Prepare
-#        $(CP) -rf ./obuspa/* $(PKG_BUILD_DIR)/
-#endef
-
-define Package/obuspa/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,14 +0,0 @@
-config controller
-	option endpointid 'self::usp-controller.com'
-
-config mtp
-	option enable 'true'
-	option protocol 'STOMP'
-	option destination 'uspq'
-
-config connection
-	option host 'usp-controller.com'
-	option username 'username'
-	option password 'password'
-	option encryption 'false'
-

obuspa/files/etc/init.d/obuspa

@@ -1,105 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-PROG=/usr/sbin/obuspa
-
-CTRL_PATH="Device.LocalAgent.Controller.1."
-MTP_PATH="Device.LocalAgent.MTP.1."
-CONN_PATH="Device.STOMP.Connection.1."
-
-log() {
-	echo "${@}"|logger -t obuspa -p debug
-}
-
-db_set() {
-	log "DBSET param|${1}| value|${2}|"
-	${PROG} -c dbset ${1} ${2}
-}
-
-validate_controller_section()
-{
-	uci_validate_section obuspa controller "${1}" \
-		'endpointid:string:"self:usp-controller.com"'
-}
-
-validate_mtp_section()
-{
-	uci_validate_section obuspa mtp "${1}" \
-		'enable:bool:true' \
-		'protocol:string:"STOMP"' \
-		'destination:string:'
-}
-
-validate_connection_section()
-{
-	uci_validate_section obuspa connection "${1}" \
-		'host:string:"usp-controller.com"' \
-		'username:string:username' \
-		'password:string:password' \
-		'encryption:bool:true'
-}
-
-configure_controller() {
-	local endpointid
-
-	validate_controller_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${CTRL_PATH}EndpointID" ${endpointid}
-}
-
-configure_mtp() {
-	local protocol enable destination
-
-	validate_mtp_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${MTP_PATH}Enable" ${enable}
-	db_set "${MTP_PATH}Protocol" ${protocol}
-	db_set "${MTP_PATH}STOMP.Destination" ${destination}
-}
-
-configure_connection() {
-	local host username password encryption
-
-	validate_connection_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-	db_set "${CONN_PATH}Host" ${host}
-	db_set "${CONN_PATH}Username" ${username}
-	db_set "${CONN_PATH}Password" ${password}
-	db_set "${CONN_PATH}X_ARRIS-COM_EnableEncryption" ${encryption}
-}
-
-db_init() {
-	[ -f /tmp/usp.db ] && rm -f /tmp/usp.db
-
-	config_load obuspa
-	config_foreach configure_controller controller
-	config_foreach configure_mtp mtp
-	config_foreach configure_connection connection
-}
-start_service() {
-	db_init
-
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_append_param command -p -v 4
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "obuspa"  /etc/init.d/obuspa restart
-}
-

owsd/Config.in

@@ -1,9 +1,9 @@
 choice
-	prompt "Select IPC Bus"
+	prompt "Select Bus"
 	default OWSD_USE_UBUS
 	depends on PACKAGE_owsd
 	help
-		Select which IPC bus to compile owsd for
+		Select which bus to compile owsd for
 
 config OWSD_USE_DBUS
 	bool "Use DBUS"
@@ -15,11 +15,3 @@ config OWSD_USE_DBUS_UBUS
 	bool "Use UBUS and DBUS"
 
 endchoice
-
-config OWSD_UPROXYD
-	bool "Enable UBUS Proxy Daemon"
-	default y if OWSD_USE_UBUS || OWSD_USE_DBUS_UBUS
-        help
-          Enabling uproxyd automates detection of other
-	  UBUS-X enabled devices in the network
-

owsd/Makefile

@@ -5,27 +5,25 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.1.1
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=0417231666ea7da12205c9a9798ecce7da85f881
+PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1
-PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS CONFIG_OWSD_UPROXYD
+PKG_CONFIG_DEPENDS:=CONFIG_OWSD_USE_DBUS CONFIG_OWSD_USE_UBUS CONFIG_OWSD_USE_DBUS_UBUS
 
 USE_UBUS-y:=-DWSD_HAVE_UBUS=ON
 USE_DBUS-y:=-DWSD_HAVE_DBUS=ON
 USE_BOTH-y:=${USE_UBUS-y} ${USE_DBUS-y}
-USE_UPROXYD-y:=-DOWSD_UPROXYD=ON
 
 CMAKE_OPTIONS:=${USE_UBUS-${CONFIG_OWSD_USE_UBUS}} \
 	${USE_DBUS-${CONFIG_OWSD_USE_DBUS}} \
-	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}} \
-	${USE_UPROXYD-${CONFIG_OWSD_UPROXYD}}
+	${USE_BOTH-${CONFIG_OWSD_USE_DBUS_UBUS}}
 
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
@@ -53,17 +51,14 @@ endef
 define Package/owsd/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/owsd $(1)/usr/bin/owsd
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/uproxyd
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/owsd.init $(1)/etc/init.d/owsd
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) ./files/owsd.config $(1)/etc/config/owsd
 	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_BIN) ./files/owsd.hotplug $(1)/etc/hotplug.d/iface/55-owsd
-ifeq ($(CONFIG_OWSD_UPROXYD),y)
-	$(CP) ./uproxy-files/* $(1)/
-endif
+#	$(INSTALL_DIR) $(1)/etc/uci-defaults
+#	$(INSTALL_BIN) ./files/owsd.uci_default $(1)/etc/uci-defaults/55-owsd-interfaces
 endef
 
 define Package/owsd-testdata

owsd/files/owsd.config

@@ -5,8 +5,8 @@ config owsd 'global'
 #	option www_maxage '3600'
 
 # ubusproxy is enbaled if: enable = 1 or peer exists or path exists
-#config ubusproxy 'ubusproxy'
-#	option enable '0'
+config ubusproxy 'ubusproxy'
+	option enable '0'
 #	list peer 'wss://repeater_hostname/'
 #	list peer 'wss://192.168.1.101/'
 #	list object 'router.*'
@@ -30,12 +30,12 @@ config owsd-listen 'lan'
 	option whitelist_interface_as_origin '1'
 	option whitelist_dhcp_domains '1'
 
-#config owsd-listen 'lan_8080'
-#	option port '8080'
-#	option interface 'lan'
-#	option ipv6 'on'
-#	option whitelist_interface_as_origin '1'
-#	option whitelist_dhcp_domains '1'
+config owsd-listen 'lan_8080'
+	option port '8080'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
 
 #config owsd-listen 'lan_https'
 #	option port '443'

owsd/files/owsd.init

@@ -111,9 +111,6 @@ validate_owsd_ubusproxy() {
 		'peer:list(string)' \
 		'object:list(string)' \
 		'prefix:string' \
-		'max_reconnect_time:string' \
-		'client_backoff_timeout:string' \
-		'reconnect_timeout:string' \
 		'peer_key:file' \
 		'peer_cert:file' \
 		'peer_ca:file' \
@@ -248,35 +245,6 @@ parse_owsd_iface() {
 	fi
 }
 
-parser_timeout()
-{
-	local flag data
-	local ret=0
-#data format is  digital with time unit
-#10s-10 seconds 10m-10 minutes 10h-10 hours 10d-10 days
-	if [ -n "$1" ]; then
-		flag=$(echo "$1"| tr -d [0-9] | tr '[A-Z]' '[a-z]')
-		data=$(echo "$1"| tr -cd [0-9])
-		case $flag in
-			s)
-			ret=$((data*1000))
-			;;
-			m)
-			ret=$((data*1000*60))
-			;;
-			h)
-			ret=$((data*1000*60*60))
-			;;
-			d)
-			ret=$((data*1000*60*60*24))
-			;;
-		esac
-		echo "$ret"
-	else
-		echo "0"
-	fi
-}
-
 start_service() {
 	# update rpcd config according to owsd acl
 	handle_owsd_acl
@@ -296,62 +264,48 @@ start_service() {
 		return 1
 	}
 
-	config_get reconn   ubusproxy   max_reconnect_time
-	config_get ctimeout ubusproxy 	client_backoff_timeout
-	config_get rtimeout ubusproxy 	reconnect_timeout
-	[ -n "${ctimeout}" ] && ctimeout=$(parser_timeout $ctimeout)
-	[ -n "${rtimeout}" ] && rtimeout=$(parser_timeout $rtimeout)
-
 	[ -n "${sock}"      ] && procd_append_param command -s"${sock}"
 	[ -n "${www}"       ] && procd_append_param command -w"${www}"
 	[ -n "${redirect}"  ] && procd_append_param command -r"${redirect}"
 	[ -n "${www_maxage}" ] && procd_append_param command -t"${www_maxage}"
-	[ -n "${rtimeout}" ] && procd_append_param command -T"${rtimeout}"
-	#validate_owsd_ubusproxy || {
-	#	echo "Ubusproxy validation failed"
-	#	return 1
-	#}
 
-	validate_owsd_ubusproxy && {
-		if [ "${enable}" -eq 1 ]; then
-			procd_append_param command -U
-
-			[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
-			[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
-			[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
-
-			append_peer () {
-				[ -n "$1"   ] && procd_append_param command -P"$1"
-			}
-
-			append_object () {
-				[ -n "$1"   ] && procd_append_param command -U"$1"
-			}
-
-			config_list_foreach "ubusproxy" "peer" append_peer
-			config_list_foreach "ubusproxy" "object" append_object
-
-			[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
-		fi
+	validate_owsd_ubusproxy || {
+		echo "Ubusproxy validation failed"
+		return 1
 	}
 
+	if [ "${enable}" -eq 1 ]; then
+		procd_append_param command -U
+
+		[ -n "${peer_cert}" ] && procd_append_param command -C"${peer_cert}"
+		[ -n "${peer_key}"  ] && procd_append_param command -K"${peer_key}"
+		[ -n "${peer_ca}"   ] && procd_append_param command -A"${peer_ca}"
+
+		append_peer () {
+			[ -n "$1"   ] && procd_append_param command -P"$1"
+		}
+
+		append_object () {
+			[ -n "$1"   ] && procd_append_param command -U"$1"
+		}
+
+		config_list_foreach "ubusproxy" "peer" append_peer
+		config_list_foreach "ubusproxy" "object" append_object
+
+		[ "${prefix}" == "mac" ] && procd_append_param command -F"mac"
+	fi
+
 	config_foreach parse_owsd_iface "owsd-listen"
 
 #	procd_set_param stderr 1
 	procd_set_param respawn
 
 	procd_close_instance
-
-	if [ "${enable}" -eq 1 ]; then
-		# Start uproxyd
-		procd_open_instance
-		procd_set_param command $UPROXYD
-		[ -n "${reconn}" ] &&  procd_append_param command -r "${reconn}"
-		[ -n "${ctimeout}" ] && procd_append_param command -t "${ctimeout}"
-		procd_set_param respawn
-		procd_close_instance
-	fi
-
+	# Start uproxyd
+	procd_open_instance
+	procd_set_param command $UPROXYD
+	procd_set_param respawn
+	procd_close_instance
 }
 
 #stop_service()

owsd/files/owsd.uci_default

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+MGMT_INTERFACES=""
+OWSD_INTERFACES=""
+NOT_DEFAULT=0
+
+mgmt_interfaces() {
+	local interface=$1
+	[ "$interface" == "loopback" ] && return
+	[ "$interface" == "lan" ] && return
+	[ "$interface" == "wan" ] && return
+	[ "$interface" == "wan6" ] && return
+
+	local type proto
+	config_get type $interface type
+	config_get proto $interface proto "none"
+	[ "$type" == "bridge" -a "$proto" == "none" ] && return
+
+	local is_lan
+	config_get is_lan $interface is_lan
+	[ "$is_lan" == "1" ] && return
+
+	local ifname
+	config_get ifname $interface ifname
+	[ "${ifname:0:1}" == "@" ] && return
+
+	MGMT_INTERFACES="$MGMT_INTERFACES $interface"
+}
+
+owsd_interfaces() {
+	local config=$1
+	local interface
+	config_get interface $config interface
+	[ "$interface" == "loopback" ] && return
+	[ "$interface" == "lan" ] && return
+	[ "$interface" == "wan" ] && return
+	[ "$interface" == "wan6" ] && return
+
+	OWSD_INTERFACES="$OWSD_INTERFACES $interface"	
+
+	NOT_DEFAULT=1
+}
+
+not_owsd() {
+	local interface=$1
+	local there=0
+	for owsd in $OWSD_INTERFACES; do
+		if [ "$interface" == "$owsd" ]; then
+			there=1
+			break
+		fi
+	done
+	return $there
+}
+
+config_load network
+config_foreach mgmt_interfaces interface
+
+config_load owsd
+config_foreach owsd_interfaces owsd-listen
+
+if [ $NOT_DEFAULT -eq 0 ]; then
+	for mgmt in $MGMT_INTERFACES; do
+		if $(not_owsd $mgmt); then
+			uci -q set owsd.$mgmt=owsd-listen
+			uci -q set owsd.$mgmt.port=80
+			uci -q set owsd.$mgmt.interface="$mgmt"
+			uci -q set owsd.$mgmt.ipv6="on"
+			uci -q set owsd.$mgmt.whitelist_interface_as_origin="1"
+			uci -q set owsd.$mgmt.origin="*"
+
+			uci -q set owsd.$mgmt"_8080"=owsd-listen
+			uci -q set owsd.$mgmt"_8080".port=8080
+			uci -q set owsd.$mgmt"_8080".interface="$mgmt"
+			uci -q set owsd.$mgmt"_8080".ipv6="on"
+			uci -q set owsd.$mgmt"_8080".whitelist_interface_as_origin="1"
+			uci -q set owsd.$mgmt"_8080".origin="*"
+
+			uci commit owsd
+		fi
+	done
+fi
+
+exit 0
+

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.crt

@@ -1,19 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIDHzCCAgegAwIBAgIJAKmrHnhgM9CZMA0GCSqGSIb3DQEBCwUAMCYxJDAiBgNV
-BAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBnYXRld2F5czAeFw0xOTA0MjcxMDQ4MTJa
-Fw0yNzA3MTQxMDQ4MTJaMCYxJDAiBgNVBAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBn
-YXRld2F5czCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAM7i0RqyVvpl
-WVm4ioXV7H/5oII6nmlGb+eQM4p0QBujhyvwtT6z0L0KXwwWRGFdYBNChBfsi9zm
-AAhgQaR5D/QPRGDIiB69O3iBd2JFqzxo1rkN/nUMbZ2OplXRscmOs34yT68hV0ov
-nv0iAr06bzyoa2sxOfN262Ic2tKYG5UYtRVnbaX40U80DYm1tvoeJfZgTiZmeuky
-7t6PrWhJ+tfKdzK+IGDsIQ3k4k+3AfS8dwDEBbGocFhx+sOG/yv5OhGlZ3dH9toz
-Gq+xrkawoa0hkKKVOFhNINdHcPG0UH7iET779nsgylT/8OGkQG3vLSBkVJ8rAaAh
-j9vKBWdxIG0CAwEAAaNQME4wHQYDVR0OBBYEFMsfty2iwKt5U+WLdsYpgYVX1ZX2
-MB8GA1UdIwQYMBaAFMsfty2iwKt5U+WLdsYpgYVX1ZX2MAwGA1UdEwQFMAMBAf8w
-DQYJKoZIhvcNAQELBQADggEBALv1l6C94e6Xos4DkiIDToLQasO0nQLcq3eZhsa6
-XJgWnBcoe7p4iLXzHzutacwTj/mx+ptbLkyqPzvIsufKeQf3hat5ICtCLZOpOW55
-fPc4GY4TMixEJDzt3L5U89BXVFTSh7aY5KbphD9zQgYcy1IpkEEPtSOL8B8KWdHb
-lrW1AE9p7YLHb4YgtS6NjEN04a1wHug/flcfes4u9DOnmJzSih9p8UtQP86hjiPK
-C9znwLrbbrJANz4D6QSTtTT+qi8iQo68sKXYLyUC10Kp19pq1FMnfY1IkCcBDSip
-hbGdxwd4txkrl52YZyuo14mXRGP/c2lvEO0a1P6IpR2kMj4=
------END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.key

@@ -1,27 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIEpAIBAAKCAQEAzuLRGrJW+mVZWbiKhdXsf/mggjqeaUZv55AzinRAG6OHK/C1
-PrPQvQpfDBZEYV1gE0KEF+yL3OYACGBBpHkP9A9EYMiIHr07eIF3YkWrPGjWuQ3+
-dQxtnY6mVdGxyY6zfjJPryFXSi+e/SICvTpvPKhrazE583brYhza0pgblRi1FWdt
-pfjRTzQNibW2+h4l9mBOJmZ66TLu3o+taEn618p3Mr4gYOwhDeTiT7cB9Lx3AMQF
-sahwWHH6w4b/K/k6EaVnd0f22jMar7GuRrChrSGQopU4WE0g10dw8bRQfuIRPvv2
-eyDKVP/w4aRAbe8tIGRUnysBoCGP28oFZ3EgbQIDAQABAoIBACYwBcr4ukdT589A
-2gjkONhSeocvTMg/4S4MFwdqd97iK3Q35SyiwlfyjyLLBWo3cyF6+Kj118c5iS4C
-nns+gWxaWRPIUB/kbBLNSv0PwRDQhTn5VEvEtIMNrrROlZOPzJ/xp3W7IMKn0aAF
-5B2LqLa4m8NYfcrr23zruJSA0S6O4O9+E2ilI0bLwMPmSEbrRhDYvOUUTP5bqWAy
-DUcOZQp26LIbx9B1gBA9XcQADjSR59ZY0vUCh6Rhd9qmJ2ZVAj78hv7yLkGOUOwS
-O9LnvBQjb7AZ9YNntTx/YlNLtbEMLfhv1/tpBZ8jVa9ZvCNBWNmrzpSCIEzhcQUY
-jv+WGyECgYEA718+bHissVTet0kcuC18XCbdg7LelOws9aSo0ZgQaRCr7BjTXNMi
-NrQPira0QmGyWtQ5eoxLw0s44b8ol0I+zwqA9q5bRMvdNUaZxE01ObC0aaZx0Sex
-51exHN7knVyWS94kMGBYQRQW5ElrmOTUUFN9WOVwsIuhx22hUd8XZ4UCgYEA3UHf
-jWzbdWlOw8ZB7hOu6MS46IFuKdztblHu3n+qw65x9i6VHy5yL8+dDOiFa8earpyP
-bPNuDr0URTj6Xu4OzQ04gLXE3SXghSKZPSOq9UoJ56fw6wXq2Dtz5rFGD4Mt+WHR
-/NiWccKSkA+x0bu8ab2hYBIAeURfqSQfAcmiRckCgYEAmTElLBpWuu6L0lTyElTZ
-38fnwB87H6e+Zj7I48ojxnmq7WA99IwSu1ulDqs61bjcghCL8IfU/NkpQCAshBEb
-TTl1q2mOc4rcuPnD8sNOqusRqwOgl7CFxH50lPt459SXQ1qZYnRmRs/qjpMGT0Uz
-M20bLUc5RWM3WAArW9AglFkCgYAdk+XHqSq5SmeeIk3D/tueAFZbtpm8fO08lzVg
-hx6T5CkV6OpEbdgT7iQnipnza46RExrVTMGEtOAV1OUbdaWC4eaQxjvX+G1IPvTP
-SIpdGhWy4y+Aq5zWZTQ8PayI/FdUBDCnJWkPMhyXp5F04Szx0cjV5/IqQ+qp2MtQ
-WN0ZiQKBgQDT7UFw5svbtjzE6pcjImRSDI4BwmA8F6C7bkK3M5mu10k+/kr5jDGG
-xgByyY61TY3TpHKLOmuxqKb3nOy8umPlFt3P7xpYTuV5+dZRrbIFKtDy2uKkYi9E
-N5xyVfanlXhlU7JoJtc2Xtkdjr5SwESHjNSjR8jDG/sd7opjeltOZg==
------END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/ubusx/ubusxDemoCA.srl

@@ -1 +0,0 @@
-514CD4028F0A688DAD8236D20F352623455A4D74

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.crt

@@ -1,18 +0,0 @@
------BEGIN CERTIFICATE-----
-MIIC+zCCAeMCFFFM1AKPCmiNrYI20g81JiNFWk10MA0GCSqGSIb3DQEBCwUAMCYx
-JDAiBgNVBAMMG3Jvb3QgQ0EgZm9yIGlvcHN5cyBnYXRld2F5czAeFw0xOTA2MjQx
-NzEwMjhaFw0yOTA2MjExNzEwMjhaME4xCzAJBgNVBAYTAlNFMRIwEAYDVQQIDAlT
-dG9ja2hvbG0xFTATBgNVBAoMDGlvcHN5cywgSW5jLjEUMBIGA1UEAwwLVUJVUy1Y
-IERlbW8wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDosnAz7cNKUCWZ
-9+qFs8PpV1J1o+Eq6Hv3Bc5ceNrPxcEsE2vDWQdl7QXU9Je++xILSxfvljHIUO7D
-8AOcH03NO3N0F1H4KhmYIRjTKogQL8y/YIGFkzL4bZXwXRtvzXxMYNtdX4Lbdiyc
-AtGTiSWJ3zBtShPGPFqgR4JpYmf3VaVy/f74tRdUL86rnVNaU5OIBMHGLLxwMf2Z
-w3MPKSNj1ATcNoegKvMvHpd7FE2o5lDgFkUV3b8QqcAFTrmLXx6mYYpo9Fo1KHrA
-6SiUP0KQ/lkQ28yfkvzmN4JpJtLpomzscn9nmJfbI5g3GezSGGFHDAyW/Y2c+VPN
-N9C9n/NhAgMBAAEwDQYJKoZIhvcNAQELBQADggEBAFEBujnBMhFVqLUPnDM41Cd0
-ZzbY5n/haBN885xQP0tNdCJ9qN0L8dr8bDe1IR02WHZ4UIXzvOj20Nu2+AFP1OCG
-CEEPLTQwlaJhaBzhnfLaxb7XCHqVodKBiYDYLQLFNdY9wYOKvyNI5xXMtPbH5fUK
-GJA4bZTbL5c4iaqtdXwLE/6a9FCtfGsv9k70tPw+KYR4tcA2t3SS2Oe/bGRrj5yQ
-Tjy0P7R033S4GlrsCRa7sRGg8yd7TgNpGsgyncsFRLHDG4V71I9NhOkoHR64oUfT
-YVPt/16TIi31vF5FJO4TJtbA2wEpUWPk7x2VjIOvvauMoYE6Hf3YLatzdaIQNHo=
------END CERTIFICATE-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.csr

@@ -1,16 +0,0 @@
------BEGIN CERTIFICATE REQUEST-----
-MIICkzCCAXsCAQAwTjELMAkGA1UEBhMCU0UxEjAQBgNVBAgMCVN0b2NraG9sbTEV
-MBMGA1UECgwMaW9wc3lzLCBJbmMuMRQwEgYDVQQDDAtVQlVTLVggRGVtbzCCASIw
-DQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAOiycDPtw0pQJZn36oWzw+lXUnWj
-4Sroe/cFzlx42s/FwSwTa8NZB2XtBdT0l777EgtLF++WMchQ7sPwA5wfTc07c3QX
-UfgqGZghGNMqiBAvzL9ggYWTMvhtlfBdG2/NfExg211fgtt2LJwC0ZOJJYnfMG1K
-E8Y8WqBHgmliZ/dVpXL9/vi1F1QvzqudU1pTk4gEwcYsvHAx/ZnDcw8pI2PUBNw2
-h6Aq8y8el3sUTajmUOAWRRXdvxCpwAVOuYtfHqZhimj0WjUoesDpKJQ/QpD+WRDb
-zJ+S/OY3gmkm0umibOxyf2eYl9sjmDcZ7NIYYUcMDJb9jZz5U8030L2f82ECAwEA
-AaAAMA0GCSqGSIb3DQEBCwUAA4IBAQDWLgiuSq41EX4J5v5RH2gE3Ywr1FdzPMMe
-SCJxYL3JOcIvDl0aNyx2bAd9Gc6Zj8uRXT8gDsB3cEgAoHdGjiZB0uoNV/Auz6kS
-mYNnmpcZfAw775cBQpYBZvg2CRFqsv8mD4/OhBmoRjMpoosLkAYPuRmE58U/Ah+6
-9MJIzVca6dn7iLMLVWndkCoD9OUwBZNHU+SGTkn0IKUGyMUTmduADPBGbB7mYg6j
-DQsHiR1v7/ngb3uaQoVS8QA+XYmTUa1UZ+/83cmzjvf17rG10KwrJZh0lQNVUt5d
-gvH8aUvQq92xcXYQlhLfVFkqxmrLZNR0rIEeUVwYvVawPK8ZR+UK
------END CERTIFICATE REQUEST-----

owsd/uproxy-files/etc/ubusx/ubusx_demo_only.key

@@ -1,27 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIEpQIBAAKCAQEA6LJwM+3DSlAlmffqhbPD6VdSdaPhKuh79wXOXHjaz8XBLBNr
-w1kHZe0F1PSXvvsSC0sX75YxyFDuw/ADnB9NzTtzdBdR+CoZmCEY0yqIEC/Mv2CB
-hZMy+G2V8F0bb818TGDbXV+C23YsnALRk4klid8wbUoTxjxaoEeCaWJn91Wlcv3+
-+LUXVC/Oq51TWlOTiATBxiy8cDH9mcNzDykjY9QE3DaHoCrzLx6XexRNqOZQ4BZF
-Fd2/EKnABU65i18epmGKaPRaNSh6wOkolD9CkP5ZENvMn5L85jeCaSbS6aJs7HJ/
-Z5iX2yOYNxns0hhhRwwMlv2NnPlTzTfQvZ/zYQIDAQABAoIBAQC+o9IA+T4R1++2
-YMImn8xVk1DfSE/lE2rcSklywSCjMGS+c3rKJFpHSxSID4tyz8dMsUz+4JIQhx3W
-MQEEGzFmftprtd9V7UfittrbxfCLMl4QPERg5uPPXBiHQACGbFb1TDTsHp/apMqP
-Vk/VC3tRpSTLpPDma/PjdDKHnDOJEXXvIiI6lWzDjkFS8cmb+ZChAVJSAVDpM3v5
-OjtH6Cfn7QnlQh5v6OEcScmdHjGKaVstoQnulr9fK632KsWd4DVrPjcs6IYz+AmI
-w6iMVWwfXM4HmtBZKmFZDB+QedvkKj3GoIGW7rbUWWWW5Nvk549SbrV4dFLmGjFe
-Vg2X59yxAoGBAPfOj/f7aJcltV6Guf4jmt0r9fB+wHAl9Vx1Dg0Etg10LJnjbgEI
-2jkvVr4qp71GUg0vTdbAwcX5ha1gjvvLEfH2ikSut7je1L26Lcm7tcyCGnlIIOU5
-gwyLwTFArdmK8yn2gC56I+MOdiqsw3xgvGeLaM39BTdAcDYtnJ2E0ysLAoGBAPBj
-/G30UVQ3bXcPuP2vZHNUSVBRr3Rsi4YO4Ue+pF4y1tcxaEDHYR+WuD03l/Vnu9mK
-xZxHLwQuVjAeogwrzNgbN3CMN9jytGfnwPPG8YOw0umpS7wk4ZBA6wh97R6H8hlI
-6rSZYt2i92rBKEDU0i5ciUnR0pjyy/IUhM9o/L7DAoGBAJqKWKCXSl/QpW5g6QdD
-3yWFb+hes9Z85aqWWX/m6z4ysEn8WrMMeUNmcVtBMMDKZQtR7+I47d9wQFyitijz
-OKrETPCOYYdKeDQmMr33cWYr0STHxbQOjNq7IW18366miAUodEIH6++DKlBs07Dy
-hyyv9VlZLPKLHi+7fEuD9UmHAoGBAL/2OCfdx+xGbsV66rC6FK78Cad383I3E5uz
-2jYeiMcoNeOV8rh3/pjpFKrd8Bzp/1oStQa82VCvZ+f5LlIlz+hqo3Teo+I8vc+T
-g8OnhEkzNNmedXoCwZUeIhGf7XBKAwwp7DLXodl3P7giEvDiggy/nGo0gcXdbPsd
-Y4j1P49dAoGAPlVSKQx+s7zfcUwJMG9AqOXvXUEg9+AJZBn/xqVVwbd0jb/yf1lB
-7Y+3Q3FndrVF/Gd7kTbgIlwI6sk7l0+CN1jjN1WEHgFenz6O4nlwIcdbQRovw/4S
-okAV3yLGjubMCjyKdBP8bpocBcstYdr2PEmrt37XFNhQVL3C8HjdPmU=
------END RSA PRIVATE KEY-----

owsd/uproxy-files/etc/uci-defaults/60-owsd-ubusproxy

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# do not create ubusproxy section if it exists already
-[ "$(uci -q get owsd.ubusproxy)" == "ubusproxy" ] && exit 0
-
-uci set owsd.ubusproxy="ubusproxy"
-uci set owsd.ubusproxy.enable="1"
-uci set owsd.ubusproxy.peer_key="/etc/ubusx/ubusx_demo_only.key"
-uci set owsd.ubusproxy.peer_cert="/etc/ubusx/ubusx_demo_only.crt"
-uci set owsd.ubusproxy.peer_ca="/etc/ubusx/ubusxDemoCA.crt"
-uci commit owsd
-
-# do not create wan_https section if it exists already
-[ "$(uci -q get owsd.wan_https)" == "owsd-listen" ] && exit 0
-
-# do not create wan_https section if wan interface doesn't exist
-[ "$(uci -q get network.wan)" == "interface" ] || exit 0
-
-uci set owsd.wan_https="owsd-listen"
-uci set owsd.wan_https.port="443"
-uci set owsd.wan_https.interface="wan"
-uci set owsd.wan_https.key="/etc/ubusx/ubusx_demo_only.key"
-uci set owsd.wan_https.cert="/etc/ubusx/ubusx_demo_only.crt"
-uci set owsd.wan_https.ca="/etc/ubusx/ubusxDemoCA.crt"
-uci set owsd.wan_https.whitelist_interface_as_origin="1"
-uci del_list owsd.wan_https.origin="*"
-uci add_list owsd.wan_https.origin="*"
-uci commit owsd
-

peripheral_manager/files/etc/init.d/peripheral_manager

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 
-START=12
+START=19
 STOP=91
 
 USE_PROCD=1

port-management/files/etc/init.d/port_management

@@ -56,7 +56,7 @@ configure_ethports(){
 	config_get speed $name speed
 	config_get ifname $name ifname
 	config_get pause $name pause
-	set_port_speed $ifname $speed $name
+	set_port_speed $ifname $speed
 	set_port_pause $ifname $pause
 }
 
@@ -73,8 +73,3 @@ service_triggers() {
 	procd_add_reload_trigger ports
 }
 
-boot() {
-	wan=$(db -q get hw.board.ethernetWanPort)
-	restart_port $wan
-	start
-}

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=4.1.1
+PKG_VERSION:=4.0.1
 
-PKG_SOURCE_VERSION:=68ccbdd0c689b26d3ded3569f6eed9ff785320df
+PKG_SOURCE_VERSION:=d19501b6f80ef649b2ffd2f87132df885ce4581f
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 
@@ -44,18 +44,7 @@ export QUESTD_CFLAGS
 
 define Package/questd
 	CATEGORY:=Utilities
-	DEPENDS:=+libuci \
-		+libubox \
-		+ubus \
-		+libpthread \
-		+TARGET_iopsys_ramips:swconfig \
-		+TARGET_iopsys_ramips:libnl-tiny \
-		+TARGET_iopsys_ramips:ip-full \
-		+TARGET_intel_mips:ip-full \
-		+libopenssl \
-		+easy-soc-libs \
-		+libmnl \
-		+libnetfilter-conntrack
+	DEPENDS:=+libuci +libubox +ubus +libpthread +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_ramips:libnl-tiny +libopenssl
 	TITLE:=router info daemon
 endef
 
@@ -70,6 +59,7 @@ define Package/questd/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/questd $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/wificontrol $(1)/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/graphd $(1)/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uproxyd $(1)/sbin/
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netcheck $(1)/usr/bin/
 endef

questd/files/etc/uci-defaults/996-questd-opreqs

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-add_required_ubusproxy_objects() {
-	uci -q del_list owsd.ubusproxy.object="wifix"
-	uci -q add_list owsd.ubusproxy.object="wifix"
-	uci commit owsd
-}
-
-add_required_ubusproxy_objects
-

rulengd/Makefile

@@ -12,7 +12,7 @@ PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=ad94ccdd82b22527ab32937ca1a2682030319ed3
+PKG_SOURCE_VERSION:=63569245b62d90d3106cc826f2d2b18f51c0b885
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1

rulengd/files/etc/config/ruleng

@@ -0,0 +1,7 @@
+config rule
+    option event 'test.event'
+    list event_data "{'test': 1, 'reason': 1}"
+    list event_data "{'tests': [1, 2, 3]}"
+    option method 'file->write'
+    list method_data "{'path': '/tmp/test_event.txt'}"
+    list method_data "{'data': 'test event received!'}"

rulengd/files/etc/init.d/rulengd

@@ -1,7 +1,10 @@
 #!/bin/sh /etc/rc.common
+#
+# Start the rulengd
+#
 
-START=17
-STOP=11
+START=99
+STOP=01
 
 USE_PROCD=1
 NAME=rulengd

uboot/Makefile

@@ -13,11 +13,11 @@ PKG_VERSION:=2016.08
 PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
-PKG_SOURCE_URL:=https://dev.iopsys.eu/intel/uboot.git
-PKG_SOURCE_VERSION:=819227ec4cf4f2f8f7e8d46a3bee58e329089de6
+PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
+PKG_SOURCE_VERSION:=15e223e20e5680bc446e84b4d8b5bce06b45fb1b
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
-PKG_SOURCE_VERSION:=670ad7a30f3c6871b6c8a972e19ca2dd78ea8c9b
+PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -46,7 +46,7 @@ UBOOT_IMG:=uboot.img
 define uboot/ex400
   TITLE:=U-Boot for the ex400
   DEPENDS:=@TARGET_iopsys_ramips
-  PKG_RELEASE:=7
+  PKG_RELEASE:=6
 endef
 
 define uboot/sdx810_ap
@@ -74,7 +74,7 @@ define uboot/grx500_norrland
   TITLE:=U-Boot for Norrland Board
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=15
+  PKG_RELEASE:=11
 endef
 
 UBOOTS := \

uspd/Makefile

@@ -5,10 +5,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=1.0.3
+PKG_VERSION:=1.0.0
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f033acb40afd9b087587d3cfba292e1d884600d6
+PKG_SOURCE_VERSION:=a5fba2890d05e868605431dacd32ffda4bdc232d
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 
@@ -38,9 +38,7 @@ TARGET_CFLAGS += \
 
 define Package/uspd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_BIN) ./files/uspd.init $(1)/etc/init.d/uspd
-	$(INSTALL_CONF) ./files/uspd.config $(1)/etc/config/uspd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uspd $(1)/usr/sbin/
 endef

uspd/files/uspd.config

@@ -1,2 +0,0 @@
-config uspd 'usp'
-	option granularitylevel  '0'

uspd/files/uspd.init

@@ -17,9 +17,3 @@ reload_service() {
 	stop
 	start
 }
-
-service_triggers()
-{
-	procd_add_reload_trigger "cwmp"
-	procd_add_config_trigger "config.change" "uspd" /etc/init.d/uspd restart
-}

voice-client/Makefile

@@ -57,7 +57,6 @@ ifeq ($(CONFIG_TARGET_intel_mips),y)
 	-e 's/brcm/tapi/g' \
 	-e 's/BRCM/TAPI/g' \
 	-e 's/broadcom/intel/g' \
-	-e 's/SWE/ETS/g' \
 	$(1)/etc/config/voice_client \
 	$(1)/etc/asterisk_templates/*
 	sed -i \

voice-client/files/etc/asterisk_templates/brcm.conf.TEMPLATE

@@ -64,10 +64,3 @@ featureaccesscodes = |FAC|
 ;
 ;language=
 
-; Whether the transferor puts the transfer target on-hold before sending REFER
-;
-; The transferor needs put the transfer target on-hold before sending REFER to the transferee as per RFC5589.
-; But call transfer fails on some devices, e.g. Ericsson MTAS as the transfer target. The configuration is
-; to solve this kind of interoperability issue.
-hold_target_before_refer = |HOLDTARGET|
-

voice-client/files/etc/config/voice_client

@@ -1,138 +1,138 @@
-config tel_line 'brcm0'
-	option extension '0000'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
-	option sip_account 'sip0'
+config 'tel_line' 'brcm0'
+	option 'extension' '0000'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm1'
-	option extension '1111'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
-	option sip_account 'sip0'
+config 'tel_line' 'brcm1'
+	option 'extension' '1111'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm2'
-	option extension '2222'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm2'
+	option 'extension' '2222'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm3'
-	option extension '3333'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm3'
+	option 'extension' '3333'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm4'
-	option extension '4444'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm4'
+	option 'extension' '4444'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm5'
-	option extension '5555'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm5'
+	option 'extension' '5555'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm6'
-	option extension '6666'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm6'
+	option 'extension' '6666'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config tel_line 'brcm7'
-	option extension '7777'
-	option sip_account 'sip0'
-	option noise '0'
-	option vad '0'
-	option txgain 4
-	option rxgain 4
-	option echo_cancel 1
-	option callwaiting '0'
-	option clir '0'
+config 'tel_line' 'brcm7'
+	option 'extension' '7777'
+	option 'sip_account' 'sip0'
+	option 'noise' '0'
+	option 'vad' '0'
+	option 'txgain' 4
+	option 'rxgain' 4
+	option 'echo_cancel' 1
+	option 'callwaiting' '0'
+	option 'clir' '0'
 
-config dialplan 'custom_dialplan'
-	option custom_outgoing_enabled '0'
-	option custom_incoming_enabled '0'
-	option custom_hangup_enabled '0'
-	option all_ports_extension '#123456'
-	option test_audio_extension '#123457'
-	option test_echo_extension '#123458'
-	option record_message_extension '#999999'
+config 'dialplan' 'custom_dialplan'
+	option 'custom_outgoing_enabled' '0'
+	option 'custom_incoming_enabled' '0'
+	option 'custom_hangup_enabled' '0'
+	option 'all_ports_extension' '#123456'
+	option 'test_audio_extension' '#123457'
+	option 'test_echo_extension' '#123458'
+	option 'record_message_extension' '#999999'
 
-config sip_advanced 'SIP'
-	option rtpstart '10000'
-	option rtpend '20000'
-	option dtmfmode 'rfc2833'
-	option remotehold 'yes'
-	option contact_line_suffix '1'
-	option registertimeoutbackoff '512'
-	option registerattemptsbackoff '0'
-	option register403timeout '0'
-	option register503timeout '0'
-	option registertimeoutguardsecs '15'
-	option registertimeoutguardlimit '30'
-	option registertimeoutguardpct '0.2'
+config 'sip_advanced' 'SIP'
+	option 'rtpstart' '10000'
+	option 'rtpend' '20000'
+	option 'dtmfmode' 'rfc2833'
+	option 'remotehold' 'yes'
+	option 'contact_line_suffix' '1'
+	option 'registertimeoutbackoff' '512'
+	option 'registerattemptsbackoff' '0'
+	option 'register403timeout' '0'
+	option 'register503timeout' '0'
+	option 'registertimeoutguardsecs' '15'
+	option 'registertimeoutguardlimit' '30'
+	option 'registertimeoutguardpct' '0.2'
 	option defaultexpiry '300'
-	option tls_version 'tlsv1'
-	option tls_cipher 'DES-CBC3-SHA'
-	option stun_server ''
-	option dnsmgr 'no'
-	option dnsmgr_refresh_interval '300'
-	option srvlookup 'yes'
+	option 'tls_version' 'tlsv1'
+	option 'tls_cipher' 'DES-CBC3-SHA'
+	option 'stun_server' ''
+	option 'dnsmgr' 'no'
+	option 'dnsmgr_refresh_interval' '300'
+	option 'srvlookup' 'yes'
 
-config tel_advanced 'TEL'
-	option country 'SWE'
-	option jbenable 'yes'
-	option jbforce 'no'
-	option jbmaxsize '500'
-	option jbimpl 'adaptive'
-	option genericplc 'yes'
-	option dialoutmsec '4000'
-	option cw_enable 'yes'
+config 'tel_advanced' 'TEL'
+	option 'country' 'SWE'
+	option 'jbenable' 'yes'
+	option 'jbforce' 'no'
+	option 'jbmaxsize' '500'
+	option 'jbimpl' 'adaptive'
+	option 'genericplc' 'yes'
+	option 'dialoutmsec' '4000'
+	option 'cw_enable' 'yes'
 
-config features 'features'
-	option cbbs_enabled '1'
-	option callforward_enabled '1'
-	option callwaiting_enabled '1'
-	option redial_enabled '1'
-	option callreturn_enabled '1'
-	option advanced_register_settings '1'
+config 'features' 'features'
+	option 'cbbs_enabled' '1'
+	option 'callforward_enabled' '1'
+	option 'callwaiting_enabled' '1'
+	option 'redial_enabled' '1'
+	option 'callreturn_enabled' '1'
+	option 'advanced_register_settings' '1'
 
 config log 'LOG'
 	option console 'notice,warning,error'
@@ -146,32 +146,31 @@ config ringing_status 'RINGING_STATUS'
 	option shouldring '1'
 
 config call_filter 'call_filter0'
-	option block_foreign '0'
-	option block_special_rate '0'
-	option block_outgoing '0'
-	option block_incoming '0'
+        option block_foreign '0'
+        option block_special_rate '0'
+        option block_outgoing '0'
+        option block_incoming '0'
 
-config cdr_log 'CDR_LOG'
-	option cdr_syslog '0'
-
-config sip_service_provider 'sip0'
-	option name 'Account 1'
-	option enabled '0'
-	option codec0 'alaw'
+config 'sip_service_provider' 'sip0'
+	option 'name' 'Account 1'
+	option 'enabled' '0'
+	option 'codec0' 'alaw'
 	option cbbs_key '5'
 	option cbbs_maxretry '5'
 	option cbbs_retrytime '300'
 	option cbbs_waittime '30'
-	option autoframing '1'
-	option cfim_on '*21*'
-	option cfim_off '#21#'
-	option cfbs_on '*61*'
-	option cfbs_off '#61#'
+	option 'autoframing' '1'
+	option 'cfim_on' '*21*'
+	option 'cfim_off' '#21#'
+	option 'cfbs_on' '*61*'
+	option 'cfbs_off' '#61#'
 	option cw_on '*43#'
 	option cw_off '#43#'
 	option cw_status '*#43#'
-	option call_return '*69'
-	option redial '*66'
-	option is_fax '0'
-	option transport 'udp'
+	option 'call_return' '*69'
+	option 'redial' '*66'
+	option 'is_fax' '0'
+	option 'transport' 'udp'
 
+config cdr_log 'CDR_LOG'
+        option cdr_syslog '0'

voice-client/files/etc/firewall.sip

@@ -1,6 +1 @@
-rtpstart=$(uci -q get voice_client.SIP.rtpstart)
-rtpstart=${rtpstart:-10000}
-rtpend=$(uci -q get voice_client.SIP.rtpend)
-rtpend=${rtpend:-20000}
-
-iptables -I zone_wan_input -m udp -p udp --dport $rtpstart:$rtpend -m comment --comment "!fw3: Allow-RTP" -j ACCEPT
+iptables -I zone_wan_input 4 -m udp -p udp --dport 10000:20000 -m comment --comment "!fw3: Allow-RTP" -j ACCEPT

voice-client/files/etc/init.d/voice_client

@@ -1,7 +1,8 @@
 #!/bin/sh /etc/rc.common
 #
-# The purpose of this file is to (re)create asterisk
-# configuration files from voice_client UCI config file.
+# This file is part of luci-app-voice,
+# its purpose is to (re)create asterisk configuration files
+# from luci config file(s).
 #
 . /lib/functions.sh
 . /lib/functions/network.sh
@@ -16,13 +17,10 @@ START=60
 USE_PROCD=1
 
 # Some global variables
-SERIAL="$(getSerial)"
-BASEMAC="$(getBaseMAC)"
-BASEMAC="${BASEMAC//:}"
-LINENAME="$(getLineName)"
-CHANNELNAME="$(getChannelName)"
+SERIAL=$(getSerial)
+BASEMAC=$(getBaseMAC)
 MODULENAME=voice
-USERAGENT="iopsys_${SERIAL}_${BASEMAC}"
+USERAGENT="Inteno_${SERIAL}_${BASEMAC}"
 
 ASTUSER=nobody
 ASTGROUP=nogroup
@@ -34,7 +32,7 @@ ASTERISKDIR=/etc/asterisk
 WORKDIR=/tmp/$MODULENAME.$$
 MD5SUMSFILE=/tmp/$MODULENAME-sums.$$
 
-# Whitespace separated list of $CHANNELNAME feature access codes
+# Whitespace separated list of $(getChannelName) feature access codes
 CHANNEL_FAC=
 
 #TODO: go through templates, check usage
@@ -84,7 +82,7 @@ TMPL_ACL=$TEMPLATEDIR/acl.conf.TEMPLATE
 TMPL_CONFBRIDGE=$TEMPLATEDIR/confbridge.conf.TEMPLATE
 TMPL_UDPTL=$TEMPLATEDIR/udptl.conf.TEMPLATE
 
-TMPL_CHANNEL=$TEMPLATEDIR/$LINENAME.conf.TEMPLATE
+TMPL_CHANNEL=$TEMPLATEDIR/$(getLineName).conf.TEMPLATE
 TMPL_CHANNEL_LINE=$TEMPLATEDIR/tel_line.TEMPLATE
 
 TMPL_MEETME=$TEMPLATEDIR/meetme.conf.TEMPLATE
@@ -153,6 +151,7 @@ assemble_and_copy_config()
 	[ -f $TMPL_ASTERISK ]		&& cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
 	[ -f $TMPL_CDR ]		&& cp $TMPL_CDR			$WORKDIR/cdr.conf
 	[ -f $TMPL_CEL ]		&& cp $TMPL_CEL			$WORKDIR/cel.conf
+	[ -f $TMPL_INDICATIONS ]	&& cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
 	[ -f $TMPL_MANAGER ]		&& cp $TMPL_MANAGER		$WORKDIR/manager.conf
 	[ -f $TMPL_MODULES ]		&& cp $TMPL_MODULES		$WORKDIR/modules.conf
 	[ -f $TMPL_EXTENSIONS_MACRO ]	&& cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
@@ -164,14 +163,6 @@ assemble_and_copy_config()
 	[ -f $TMPL_UDPTL ]	        && cp $TMPL_UDPTL	        $WORKDIR/udptl.conf
 	[ -f $SPECRATECFG ]		&& cp $SPECRATECFG		$WORKDIR/special_rate_nr.cfg
 	
-	[ -f $TMPL_INDICATIONS ]	&&  {
-		cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
-
-		config_get country TEL country
-		country_code=$(supportedCountries |grep $country |cut -d':' -f3 |tr [A-Z] [a-z])
-		sed -i "s/^country=.*/country=${country_code}/g" $WORKDIR/indications.conf
-	}
-
 	test -e $TMPL_MEETME && cp $TMPL_MEETME $WORKDIR/meetme.conf
 	
 	# Handle extensions_extra, carry over old file to new config if there is one
@@ -191,7 +182,7 @@ assemble_and_copy_config()
 	mv $WORKDIR/sip_registrations.tmp	$WORKDIR/sip_registrations.conf
 	mv $WORKDIR/sip_providers.tmp		$WORKDIR/sip_providers.conf
 	mv $WORKDIR/sip_users.tmp		$WORKDIR/sip_users.conf
-	mv $WORKDIR/$LINENAME.tmp		$WORKDIR/$LINENAME.conf
+	mv $WORKDIR/$(getLineName).tmp		$WORKDIR/$(getLineName).conf
 	mv $WORKDIR/extensions.tmp		$WORKDIR/extensions.conf
 	mv $WORKDIR/codecs.tmp			$WORKDIR/codecs.conf
 	mv $WORKDIR/rtp.tmp			$WORKDIR/rtp.conf
@@ -261,30 +252,95 @@ read_codecs_ptime()
 # returns a list of lines, formatted to replace a tag with sed
 # in a Dial() command
 #
+# For backwards compatibility, if i is only a number (not prefixed by
+#	"SIP/" or "CHANNEL/") then add "CHANNEL/"
+#
 read_lines()
 {
-	local line call_lines lines clength
+	local lines=""
+	local call_lines
+	local fxsIdx fxsEpt dectIdx dectEpt
 
+	# Are lines already set by user conf?
 	config_get call_lines $1 call_lines
 
-	for line in $call_lines ; do
+	# Otherwise set default depending on board HW. This
+	# is only done at very first boot or a default reset.
+	if test -z "$call_lines"; then
+		# Get all FSX voice endpoints. Translate to uppercase with awk
+		# due to tr [:upper:] doesn't work in our BusyBox.
+		voicePorts=$(db get hw.board.VoicePortOrder | \
+			awk '{ print toupper($0) }' | \
+			sed  -e "s/\([[:alpha:]]*\)\([[:digit:]]\)/\1\/\2/g")
+		voiceNames=$(db get hw.board.VoicePortNames)
+		hasVoice=0
 
-		# convert line format to <LINENAME><LINEID>
-		case $line in
-			[0-9])
-			;;
-			"$CHANNELNAME"/[0-9])
-				# get the index from channel name
-				clength=$(echo $CHANNELNAME | wc -c)
-				line="${line:$clength}"
-			;;
+		if test $(db get hw.board.hasVoice) = "1"; then
+			# Get the first FSX voice endpoint index by
+			# searching for the name usually used.
+			fxsIdx=$(echo $voiceNames | \
+				awk -e '{
+					i = 1;
+					while(i <= NF && tolower($i) !~ /^tel.*$/) {
+						i++;
+					}
+					print i;
+				}'
+			)
+	
+			# Convert index to endpoint ID
+			if test $fxsIdx -gt 0; then
+				fxsEpt=$(echo $voicePorts | awk '{ print $'$fxsIdx' }')
+			fi
+
+			hasVoice=1
+		fi
+	
+		if test $(db get hw.board.hasDect) = "1"; then
+			# Get the first Dect voice endpoint index by
+			# searching for the name usually used.
+			dectIdx=$(echo $voiceNames | \
+				awk -e '{
+					i = 1;
+					while(i <= NF && tolower($i) !~ /^dect.*$/) {
+						i++;
+					}
+					print i;
+				}
+			')
+
+			if test $dectIdx -gt 0; then
+				dectEpt=$(echo $voicePorts | awk '{ print $'$dectIdx' }')
+			fi
+
+			hasVoice=1
+		fi
+
+		if test $hasVoice -eq 1; then
+		        call_lines="$dectEpt $fxsEpt"
+		        # Remove leading/trailing spaces
+			call_lines=$(echo $call_lines | xargs echo -n)
+
+			# If we didn't find any endpoint ID we
+			# fallback to activate them all.
+			if test -z "$call_lines"; then
+				call_lines="$voicePorts"
+			fi
+		fi
+
+		# Save the endpoint IDs we found where the
+		# GUI expects to find them.
+		uci_set voice_client "${1}" "call_lines" "$call_lines"
+		uci_commit voice_client
+	fi
+
+	for i in $call_lines ; do
+		case $i in
+			''|*[!0-9]*)	lines=$lines"$i&" ;;
+			*) 				lines=$lines"$(getChannelName)/$i&" ;;
 		esac
-
-		[ -n "$line" ] || continue
-
-		lines="$lines$CHANNELNAME/$line&"
+		
 	done
-
 	lines=$(escape_sed_substitution $lines)
 	echo "${lines%??}"
 }
@@ -664,25 +720,29 @@ configure_sip_provider()
 	local autoframing
 	local encryption
 
-	config_get enabled $1 enabled "0"
+	config_get enabled $1 enabled
 	config_get domain $1 domain
-	config_get host $1 host "$domain"
+	config_get host $1 host
 	config_get port $1 port
 	config_get outboundproxy $1 outboundproxy
 	config_get outboundproxyport $1 outboundproxyport
 	config_get user $1 user
 	config_get authuser $1 authuser
 	config_get secret $1 secret
-	config_get is_fax $1 is_fax "0"
-	config_get autoframing $1 autoframing "0"
-	config_get transport $1 transport "udp"
-	config_get encryption $1 encryption "0"
+	config_get is_fax $1 is_fax
+	config_get autoframing $1 autoframing
+	config_get transport $1 transport
+	config_get encryption $1 encryption
 
 	# This is a hack to fix security issue #14962
 	user=${user//"'"/}
 	authuser=${authuser//"'"/}
 
-	if [ "$enabled" == "0" ] ; then
+	if [ -z "$transport" ] ; then 
+		transport="udp" 
+	fi
+
+	if [ -z "$enabled" -o "$enabled" = "0" ] ; then
 		return
 	fi
 
@@ -693,6 +753,10 @@ configure_sip_provider()
 
 	echo "Configuring SIP Provider $1"
 
+	if [ -z "$host" ] ; then
+		host=$domain
+	fi
+
 	# Get secret from existing asterisk config if its not set in luci config
 	if [ -z "$secret" ] ; then
 		echo "Restoring secret from old config for $1"
@@ -739,20 +803,23 @@ configure_sip_provider()
 	fi
 
 	# Set or remove encryption
-	if [ "$encryption" == "0" ] ; then
+	if [ -z "$encryption" -o "$encryption" == "0" ] ; then
 		sed -i "/|ENCRYPTION|/d"		$WORKDIR/sip_provider.tmp
 	else
 		sed -i "s/|ENCRYPTION|/yes/g"		$WORKDIR/sip_provider.tmp
 	fi
 
 	# Force ulaw/alaw if fax, otherwise read selected codecs
-	if [ "$is_fax" == "1" ] ; then
+	if [ -z "$is_fax" -o "$is_fax" = "1" ] ; then
 		sed -i "s/|ALLOW|/allow = ulaw\nallow = alaw/"	$WORKDIR/sip_provider.tmp
 	else
 		sed -i "s/|ALLOW|/$(read_codecs_ptime $1)/"		$WORKDIR/sip_provider.tmp
 	fi
 
 	# Autoframing
+	if [ -z "$autoframing" ] ; then
+		autoframing=0
+	fi
 	sed -i "s/|AUTOFRAMING|/$autoframing/"			$WORKDIR/sip_provider.tmp
 
 	# Set registered extension so that incoming calls match the correct peer
@@ -965,9 +1032,9 @@ configure_queue()
 	do
 		local out=""
 		re='^[0-9]+$'
-		num=${member#$LINENAME}
+		num=${member#$(getLineName)}
 		if [ -z "${num##[0-9]*}" ] ; then
-			out="$CHANNELNAME/$num"
+			out="$(getChannelName)/$num"
 		else
 			local sip_user
 			config_get sip_user $member user
@@ -1621,7 +1688,7 @@ configure_extensions_provider()
 	echo "exten => $user,n(norewrite),NoOp()">>							$tmp
 
 	# read a list of lines that should be dialled on incoming calls
-	incoming_lines="$(read_lines $1)"
+	incoming_lines=$(read_lines $1)
 	config_get call_queue $1 call_queue
 	config_get call_ivr $1 call_ivr
 	if [ -n "$incoming_lines" ]; then
@@ -1670,7 +1737,7 @@ configure_tel_line_extension()
 	local cbbs_retrytime
 	local cbbs_waittime
 	local mailbox
-	local line_name=$LINENAME
+	local line_name=$(getLineName)
 	
 	line=${1:${#line_name}}
 	config_get extension $1 extension
@@ -1775,11 +1842,11 @@ configure_codecs()
 }
 
 #
-# Configure default settings for $LINENAME.conf
+# Configure default settings for $(getLineName).conf
 #
 configure_tel()
 {
-	echo "Configuring $CHANNELNAME"
+	echo "Configuring $(getChannelName)"
 	local jbenable
 	local jbforce
 	local jbmaxsize
@@ -1788,8 +1855,6 @@ configure_tel()
 	local dialoutmsec
 	local fac
 	local echocancel
-	local hold_target_before_refer
-	local calleridtype
 
 	config_get jbenable TEL jbenable
 	config_get jbforce TEL jbforce
@@ -1799,8 +1864,6 @@ configure_tel()
 	config_get dialoutmsec TEL dialoutmsec
 	config_get fac TEL fac
 	config_get echocancel TEL echo_cancel
-	config_get hold_target_before_refer TEL hold_target_before_refer
-	config_get calleridtype TEL calleridtype
 
 	CHANNEL_FAC="$CHANNEL_FAC $fac"
 	# Convert whitespace to commas
@@ -1810,40 +1873,29 @@ configure_tel()
 		dialoutmsec=4000
 	fi
 
-	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$LINENAME.tmp
-	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$LINENAME.tmp
-	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$LINENAME.tmp
-	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$LINENAME.tmp
-
-	if [ -n "${calleridtype}" ] ; then
-		sed -i "s/^calleridtype *=.*/calleridtype = ${calleridtype}/g" $WORKDIR/$LINENAME.tmp
-	else
-		sed -i "/^calleridtype *=.*/d" $WORKDIR/$LINENAME.tmp
-	fi
+	sed -i "s/|JBENABLE|/$jbenable/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBFORCE|/$jbforce/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBMAXSIZE|/$jbmaxsize/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|JBIMPL|/$jbimpl/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|DIALOUTMSEC|/$dialoutmsec/"			$WORKDIR/$(getLineName).tmp
+	sed -i "s/|FAC|/$CHANNEL_FAC/"				$WORKDIR/$(getLineName).tmp
+	sed -i "s/|CHANNELS|/$(db get hw.board.VoicePorts)/"	$WORKDIR/$(getLineName).tmp
+	sed -i "s/|ECHOCANCEL|/$(getEchoCancellingValue $echocancel)/"	$WORKDIR/$(getLineName).tmp
 
 	if [ "$dtmfmode" == "compatibility" ] ; then
 		dtmfcompatibility="1"
 	else
 		dtmfcompatibility="0"
 	fi
-	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$LINENAME.tmp
-
-	if [ "$hold_target_before_refer" == "no" ]; then
-		sed -i "s/|HOLDTARGET|/no/"			$WORKDIR/$LINENAME.tmp
-	else
-		sed -i "s/|HOLDTARGET|/yes/"			$WORKDIR/$LINENAME.tmp
-	fi
+	sed -i "s/|DTMFCOMPATIBILITY|/$dtmfcompatibility/"      $WORKDIR/$(getLineName).tmp
 }
 
 #
-# Configure settings for individual line in $LINENAME.conf
+# Configure settings for individual line in $(getLineName).conf
 #
 configure_tel_line()
 {
+	echo "Configuring $(getChannelName) line $1"
 	local extension
 	local sip_provider
 	local codecs
@@ -1900,7 +1952,7 @@ configure_tel_line()
 	sed -i "s/|DTMFRELAY|/$dtmfmode/"			$WORKDIR/tel_line.tmp
 	sed -i "s/|CALLWAITING|/$callwaiting/"			$WORKDIR/tel_line.tmp
 	sed -i "s/|CLIR|/$clir/"				$WORKDIR/tel_line.tmp
-	sed -i "s/|LINE_NAME|/$LINENAME/"			$WORKDIR/tel_line.tmp
+	sed -i "s/|LINE_NAME|/$(getLineName)/"			$WORKDIR/tel_line.tmp
 
 	#Configure CHANNEL line with codecs according to the SIP line settings
 #	local is_fax
@@ -1911,7 +1963,7 @@ configure_tel_line()
 # 		sed -i "s/|ALLOW|/$(read_codecs $sip_provider)/"	$WORKDIR/tel_line.tmp
 # 	fi
 
-	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$LINENAME.tmp
+	cat $WORKDIR/tel_line.tmp >>				$WORKDIR/$(getLineName).tmp
 	rm -f							$WORKDIR/tel_line.tmp
 }
 
@@ -2011,14 +2063,14 @@ pbx_fix_ownership()
 }
 
 #
-# Calculate a name for each $LINENAME line, depending on port type
+# Calculate a name for each $(getLineName) line, depending on port type
 # and number. The name is used to make UI look better.
 #
 set_line_name()
 {
 	local maxlinenum=$2
 	local curname name_ix ix item lnum
-	local line_name=$LINENAME
+	local line_name=$(getLineName)
 	local line_name_len=${#line_name}
 	local tel_line=$1
 	
@@ -2124,7 +2176,7 @@ start_service() {
 	cp $TMPL_SIP			$WORKDIR/sip.tmp
 	cp $TMPL_RTP			$WORKDIR/rtp.tmp
 	cp $TMPL_STUN			$WORKDIR/res_stun_monitor.tmp
-	cp $TMPL_CHANNEL		$WORKDIR/$LINENAME.tmp
+	cp $TMPL_CHANNEL		$WORKDIR/$(getLineName).tmp
 	cp $TMPL_CODECS			$WORKDIR/codecs.tmp
 	cp $TMPL_VOICEMAIL		$WORKDIR/voicemail.tmp
 	cp $TMPL_DNSMGR			$WORKDIR/dnsmgr.tmp
@@ -2239,18 +2291,16 @@ stop_service() {
 
 reload_service() {
 	start
-	# turn off voice led; asterisk will turn it on if there is a registered account
+	#stop
+	# turn off voice led; asterisk will turn it on
+	# if there is a registered account
 	ubus call led.voice1 set '{"state":"off"}'
 
-	# FXS channel module must be reloaded before sip module. Otherwise some attributes like
-	# line's registration state which is updated by SIP module through callback might be
-	# reset.
-	asterisk -rx "config reload $ASTERISKDIR/indications.conf"
-	asterisk -rx "$(getChipVendor) reload"
 	asterisk -rx "config reload $ASTERISKDIR/sip.conf"
 	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
+	asterisk -rx "$(getChipVendor) reload"
 }
 
 service_triggers() {

voice-client/files/etc/uci-defaults/99-voice_client

@@ -5,7 +5,6 @@
 # Adapt to config section name changes
 grep -q brcm_line /etc/config/voice_client && sed -i 's/brcm_line/tel_line/g' /etc/config/voice_client
 grep -q brcm_advanced /etc/config/voice_client && sed -i 's/brcm_advanced/tel_advanced/g' /etc/config/voice_client
-grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM\///g' /etc/config/voice_client
 grep -q BRCM /etc/config/voice_client && sed -i 's/BRCM/TEL/g' /etc/config/voice_client
 
 # Add call filter section
@@ -37,6 +36,27 @@ EOT
 
 }
 
+# Default phone volume for iopsysWrt 4.X.
+uci -q batch <<-EOT
+	set voice_client.$(getLineName)0.txgain=4
+	set voice_client.$(getLineName)0.rxgain=4
+	set voice_client.$(getLineName)1.txgain=4
+	set voice_client.$(getLineName)1.rxgain=4
+	set voice_client.$(getLineName)2.txgain=4
+	set voice_client.$(getLineName)2.rxgain=4
+	set voice_client.$(getLineName)3.txgain=4
+	set voice_client.$(getLineName)3.rxgain=4
+	set voice_client.$(getLineName)4.txgain=4
+	set voice_client.$(getLineName)4.rxgain=4
+	set voice_client.$(getLineName)5.txgain=4
+	set voice_client.$(getLineName)5.rxgain=4
+	set voice_client.$(getLineName)6.txgain=4
+	set voice_client.$(getLineName)6.rxgain=4
+	set voice_client.$(getLineName)7.txgain=4
+	set voice_client.$(getLineName)7.rxgain=4
+	commit voice_client
+EOT
+
 # Add firewall include
 uci -q batch <<-EOT
         delete firewall.sip

voice-client/files/lib/voice/broadcom.sh

@@ -22,7 +22,7 @@ getBaseMAC() {
 }
 
 getAllLines() {
-    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5"
+    echo "BRCM/0&BRCM/1&BRCM/2&BRCM/3&BRCM/4&BRCM/5&BRCM/6"
 }
 
 getLineIdx() {
@@ -43,32 +43,3 @@ getEchoCancellingValue() {
 	    ;;
     esac
 }
-
-supportedCountries() {
-	echo "Australia:AUS"
-	echo "Belgium:BEL"
-	echo "Brazil:BRA"
-	echo "Chile:CHL"
-	echo "China:CHN"
-	echo "Czech:CZE"
-	echo "Denmark:DNK"
-	echo "ETSI:ETS"
-	echo "Finland:FIN"
-	echo "France:FRA"
-	echo "Germany:DEU"
-	echo "Hungary:HUN"
-	echo "India:IND"
-	echo "Italy:ITA"
-	echo "Japan:JPN"
-	echo "Netherlands:NLD"
-	echo "New Zealand:NZL"
-	echo "North America:USA"
-	echo "Spain:ESP"
-	echo "Sweden:SWE"
-	echo "Switzerland:CHE"
-	echo "Norway:NOR"
-	echo "Taiwan:TWN"
-	echo "United Kingdoms:GRB"
-	echo "United Arab Emirates:ARE"
-	echo "CFG TR57:T57"
-}

voice-client/files/lib/voice/intel.sh

@@ -14,12 +14,12 @@ getLineName() {
 }
 
 getSerial() {
-    sernum="$(fw_printenv -n serial_number 2> /dev/null)"
+    sernum=$(fw_printenv -n serial_number) 2> /dev/null
 
     if [ $? ]; then
-	echo $sernum
-    else
 	echo 0
+    else
+	echo $sernum
     fi
 }
 
@@ -28,11 +28,12 @@ getBaseMAC() {
 }
 
 getAllLines() {
-    echo "TAPI/0&TAPI/1"
+    echo "TAPI/1&TAPI/2&TAPI/3&TAPI/4&TAPI/5&TAPI/6"
 }
 
 getLineIdx() {
-    echo $1
+    i=$1
+    echo $((i+1))
 }
 
 getEchoCancellingValue() {
@@ -49,16 +50,3 @@ getEchoCancellingValue() {
 	    ;;
     esac
 }
-
-supportedCountries() {
-	echo "Austria:AUT:AT"
-	echo "Denmark:DNK:DK"
-	echo "Estonia:EST:EE"
-	echo "Germany:DEU:DE"
-	echo "Netherlands:NLD:NL"
-	echo "Norway:NOR:NO"
-	echo "Spain:ESP:ES"
-	echo "Sweden:SWE:SE"
-	echo "Switzerland:CHE:CH"
-	echo "United Kingdom:GBR:UK"
-}

voice-client/files/usr/libexec/rpcd/voice.asterisk

@@ -3,11 +3,9 @@
 . /usr/share/libubox/jshn.sh
 . /lib/voice/voicelib.sh
 
-LOGFILE="/var/log/asterisk/cdr-csv/Master.csv"
-
 case "$1" in
 	list)
-		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {}, "supported_countries" : {} }'
+		echo '{ "status" : {}, "lines" : {}, "codecs" : {}, "call_log" : {}, "platform" : {} }'
 
 	;;
 	call)
@@ -93,72 +91,39 @@ case "$1" in
                                 json_init
                                 json_add_array "call_log"
 
-				[ -f ${LOGFILE} ] || {
+				[ -f /var/log/asterisk/cdr-csv/Master.csv ] || {
 					json_dump
 					return
 				}
 
-				tail -200 ${LOGFILE} | sed -n '1!G;h;$p' > ${LOGFILE}.tmp
-				num_entries=0
-
-				sip_service_providers=$(uci show voice_client | grep sip_service_provider)
-				sip_user=$(uci show voice_client | grep user)
-
-				old_ifs=$IFS
-				while read -r line
-				do
-					line_whithout_quotes=$(echo $line | tr -d '"')
-					IFS=,
-					set -- $line_whithout_quotes
-					IFS=$old_ifs
-					n_args=$#
-					eval "uniqueid=\$$n_args"
-					case $uniqueid in
-						[A-Z,a-z]+) continue ;;
-					esac
-					source="$2"
-					destination="$3"
-					# "source" will be empty for call log of internal call (beween extension numbers)
-					[ -z "$source" ] && [ -z "$destination" ] && continue
-					account="$4"
-					#Filter out a trailing -outgoing from the SIP account name
-					#This will have been added if a direct_dial number was used
-					account=${account%-outgoing}
-					actok=0
-					# match "sip0" in "voice_client.sip0=sip_service_provider"
-					case $sip_service_providers in
-						*.$account=*) actok=1 ;;
-					esac
-					[ "$account" == "call_line" ] && actok=1
-					[ $actok -eq 0 ] && continue
-					ts=$((n_args-7))
-					eval "time_start=\$$ts"
-					dp=$((n_args-2))
-					eval "disposition=\$$dp"
-					# match "user0" from "voice_client.user0=sip_user"
-					case $sip_user in
-						*.$source=*) direction="OUTGOING" ;;
-						*) direction="INCOMING" ;;
-					esac
-					du=$((n_args-4))
-					eval "duration=\$$du"
-
+                                while read -r line
+                                do
+					line="$(echo $line | tr -d '\"')"
+					uniqueid="$(echo $line | awk -F',' '{print $(NF-1)}')"
+					echo $uniqueid | grep "[A-Z,a-z]" && continue
+					from="$(echo $line | cut -d',' -f2)"
+					to="$(echo $line | cut -d',' -f3)"
+					callok=0
+					uci show voice_client | grep user | grep -wq "$from" && callok=1
+					uci show voice_client | grep user | grep -wq "$to" && callok=1
+					[ $callok -eq 0 ] && continue
+					account="$(echo $line | cut -d',' -f4)"
+					uci show voice_client  | grep sip_service_provider | grep -wq "$account" || continue
+					timestart="$(echo $line | awk -F',' '{print $(NF-8)}')"
+					timend="$(echo $line | awk -F',' '{print $(NF-6)}')"
+					startdate=$(date -u -d "$timestart" +"%s")
+					enddate=$(date -u -d "$timend" +"%s")
+					uci show voice_client | grep user | grep -wq "$from" && direction="OUTGOING" || direction="INCOMING"
 					json_add_object ""
-					json_add_string uniqueid "$uniqueid"
-					json_add_string time "$time_start"
-					json_add_int duration "$duration"
-					json_add_string disposition "$disposition"
-					json_add_string direction "$direction"
-					json_add_string from "$source"
-					json_add_string to "$destination"
+				        json_add_string uniqueid "$uniqueid"
+				        json_add_string time "$timestart"
+				        json_add_int duration $((enddate - startdate))
+				        json_add_string disposition "$(echo $line | awk -F',' '{print $(NF-3)}')"
+				        json_add_string direction "$direction"
+				        json_add_string from "$from"
+				        json_add_string to "$to"
 					json_select ..
-
-					num_entries=$((num_entries+1))
-					if [ $num_entries -ge 100 ]; then
-						break
-					fi
-				done < ${LOGFILE}.tmp
-				rm ${LOGFILE}.tmp
+                                done < /var/log/asterisk/cdr-csv/Master.csv
 				json_dump
 			;;
 			platform)
@@ -171,8 +136,8 @@ case "$1" in
 					    json_add_int chanoffset 0
 				    ;;
 				    "tapi")
-					    json_add_int lineoffset 0
-					    json_add_int chanoffset 0
+					    json_add_int lineoffset 1
+					    json_add_int chanoffset -1
 				    ;;
 			        *)
 				    # Error, unknown platform
@@ -181,22 +146,6 @@ case "$1" in
 				
 				json_dump
 			;;
-			supported_countries)
-				vcf="/tmp/voice.supported_countries"
-				supportedCountries > $vcf
-                                json_init
-                                json_add_array countries
-				while IFS= read -r line
-				do
-					json_add_object ""
-					json_add_string country "$(echo $line | cut -d':' -f1)"
-					json_add_string code "$(echo $line | cut -d':' -f2)"
-					json_select ..
-				done < "$vcf"
-
-				json_dump
-				rm -f $vcf
-			;;
 		esac
 	;;
 esac

voice-client/files/usr/sbin/ringing

@@ -49,11 +49,6 @@ set_ringing_schedule() {
 	stop_hour=$(echo $stop | awk -F ':' '{print$1}')
 	stop_min=$(echo $stop | awk -F ':' '{print$2}')
 
-	[ "${start_min//[0-9]/}" = "" ] || return
-	[ "${start_hour//[0-9]/}" = "" ] || return
-	[ "${stop_min//[0-9]/}" = "" ] || return
-	[ "${stop_hour//[0-9]/}" = "" ] || return
-
 	daymatch=0
 	for day in $days; do
 		[ "${day:0:3}" == "$current_day" ] && daymatch=1
@@ -61,8 +56,6 @@ set_ringing_schedule() {
 		[ -n "$dayns" ] && dayns="$dayns,$dayn" || dayns="$dayn"
 	done
 
-	[ "${dayns//[0-6,\-]/}" = "" ] || return
-
 	if [ $daymatch -eq 1 -a $current_time -gt ${start/:/} -a $current_time -lt ${stop/:/} ]; then
 		timematch=1
 		uci -q set voice_client.RINGING_STATUS.shouldring="$status"

voicesec/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=voicesec
 PKG_VERSION:=1.0
 
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/voicesec.git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/voicesec.git
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=661c0091e579e284712aeed892e921cc84a6f0bb
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

wifilife/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifilife
-PKG_VERSION:=1.4.16
+PKG_VERSION:=1.0.3
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=0486af24db19541f63c52d0fa4f2da5b7b727fc1
+PKG_SOURCE_VERSION:=837631d44eafa3827a1c1c1603540658744f4a9a
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)
@@ -16,7 +16,7 @@ PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
 PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROD)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 else
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife.git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/wifilife.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 endif
 
@@ -52,8 +52,10 @@ TARGET_CFLAGS += \
 MAKE_PATH:=src
 
 define Package/wifilife/install
-	$(INSTALL_DIR) $(1)/etc
-	$(CP) -r ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/wifilife.init $(1)/etc/init.d/wifilife
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/wifiagent $(1)/usr/sbin/
 endef

wifilife/files/etc/firewall.mbid

@@ -1,72 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/mbid.sh
-
-remove_mbid_rules() {
-	old_rules="$(cat "/tmp/mbid_rules" 2>/dev/null)"
-	IFS=$'\n'
-	for old_rule in $old_rules; do
-		old_rule=${old_rule/-A /-D }
-		eval $old_rule 2>/dev/null
-	done
-	rm -f /tmp/mbid_rules
-}
-
-# read firewall parental rules and add repeated addresses
-append_mbid_rules() {
-	[ "$(uci -q get owsd.ubusproxy.enable)" == "1" ] || return
-
-	octets=$(get_octets)
-	mobid=$(get_mobid)
-	[ -z "$mobid" -o -z "$octets" ] && return
-
-	rule=""
-	oct2="$(echo $mobid | awk '{print $1}')"
-	oct3="$(echo $mobid | awk '{print $2}')"
-	rules="$(cat /tmp/fw3.rules.ipv4 | grep -i forward | grep -i "\-\-mac\-source")"
-	[ -z "$rules" ] && return
-
-	IFS=$'\n'
-	for rule in $rules; do
-		chain="$(echo $rule | awk '{print tolower($5)}')"
-		[ -z "$chain" -o "$chain" != "forward" ] && continue
-
-		# delete rule, replace --append with --delete
-		del_rule=${rule/-A /-D }
-		while [ -z "$(eval "$del_rule" 2>&1)" ]; do
-			:
-		done
-
-		mac=$(echo $rule | awk '{print $9}')
-
-		# re-append rule
-		eval $rule
-
-		rpt_macs=$(repeated_macs $octets $oct2 $oct3 $mac | awk '{print toupper($0)}')
-		> /tmp/mbid_rules
-		for rpt_mac in $rpt_macs; do
-			[ -z "$rpt_mac" ] && continue
-			rpt_rule=${rule/$mac/$rpt_mac}
-			del_rule=${rpt_rule/-A /-D }
-			while [ -z "$(eval "$del_rule" 2>&1)" ]; do
-				:
-			done
-
-			eval $rpt_rule
-			echo $rpt_rule >> /tmp/mbid_rules
-		done
-	done
-}
-
-finish() {
-	rm -f /tmp/mbid.lock
-}
-trap finish EXIT INT TERM
-
-while [ -f /tmp/mbid.lock ]; do
-	sleep 2
-done
-touch /tmp/mbid.lock
-remove_mbid_rules
-append_mbid_rules
-rm -f /tmp/mbid.lock

wifilife/files/etc/ruleng/mbid.json

@@ -1,21 +0,0 @@
-{
-	"if" : [
-		{
-			"event": "ubus.object.add",
-			"regex": true,
-			"match": {
-				"path":".*\/wifi\\.agent"
-			}
-		}
-	],
-	"then" : [
-		{
-			"object": "file",
-			"method":"exec",
-			"args": {
-				"command": "sh",
-				"params": ["/etc/firewall.mbid"]
-			}
-		}
-	]
-}

wifilife/files/etc/uci-defaults/999-wifilife-opreqs

@@ -3,13 +3,11 @@
 . /lib/functions.sh
 
 add_owsd_object_wifi() {
-	uci -q del_list owsd.ubusproxy.object="router.system"
-	uci -q del_list owsd.ubusproxy.object="wifix"
-	uci -q del_list owsd.ubusproxy.object="wifi.*"
-	uci -q add_list owsd.ubusproxy.object="router.system"
-	uci -q add_list owsd.ubusproxy.object="wifix"
-	uci -q add_list owsd.ubusproxy.object="wifi.*"
-	uci commit owsd
+	local wifi=$(uci -q get owsd.ubusproxy.object | grep wifi*)
+	if [ -z "$wifi" ]; then
+		uci -q add_list owsd.ubusproxy.object="wifi*"
+		uci commit owsd
+	fi
 }
 
 add_dnsmasq_lease_hwmask() {
@@ -20,27 +18,5 @@ add_dnsmasq_lease_hwmask() {
 	fi
 }
 
-add_firewall_mbid() {
-	local ubusx="$(uci -q get owsd.ubusproxy.enable)"
-	if [ -f /etc/firewall.mbid ]; then
-		uci -q get firewall.mbid || {
-				uci -q set firewall.mbid=include
-				uci -q set firewall.mbid.path="/etc/firewall.mbid"
-				uci -q set firewall.mbid.reload=1
-				uci del_list firewall.mbid._access_w=root
-				uci add_list firewall.mbid._access_w=root
-				uci commit firewall
-		}
-	fi
-}
-
-add_ruleng_section() {
-	uci -q add ruleng rule
-	uci -q set ruleng.@rule[-1].recipe='/etc/ruleng/mbid.json'
-	uci commit ruleng
-}
-
 add_owsd_object_wifi
 add_dnsmasq_lease_hwmask
-add_firewall_mbid
-add_ruleng_section

wifilife/files/lib/functions/mbid.sh

@@ -1,147 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-mobid_cb() {
-	local device mobility_domain
-
-	config_get device $1 device
-	[ "$device" != "$2" ] && return;
-
-	config_get mobility_domain $1 mobility_domain
-	echo "$mobility_domain"
-}
-
-_get_mobid() {
-	vif=$1
-	config_load wireless
-	mobid="$(config_foreach mobid_cb wifi-iface $vif)"
-	echo $mobid
-}
-
-repeated_macs() {
-	octets=$1
-	oct2=$2
-	oct3=$3
-	mac=$4
-	macs=""
-	oct456=${mac:9}
-
-	[ -z "$octets" -o -z "$oct2" -o -z "$oct3" -o -z "$mac" -o -z "$oct456" ] && return
-
-	IFS=$' '
-	for oct1 in $octets; do
-		macs="$oct1:$oct2:$oct3:$oct456 $macs"
-	done
-
-	echo "$macs"
-}
-
-# transform a mac address to all possibly repeated - recommended when parsing one or few MACs
-mac_to_repeated() {
-	mac=$1
-	octets=""
-	oct2=""
-	oct3=""
-
-	octets=$(get_octets)
-	mobid=$(get_mobid)
-	[ -z "$mobid" -o -z "$octets" ] && return
-
-	oct2="$(echo $mobid | awk '{print $1}')"
-	oct3="$(echo $mobid | awk '{print $2}')"
-
-	echo "$(repeated_macs $octets $oct2 $oct3 $mac)"
-}
-
-assocl_match_mac() {
-	mac=$1
-
-	res="$(ubus call wifix assoclist 2>/dev/null)"
-
-	json_load "$res"
-	json_select assoclist 2>/dev/null
-	json_get_keys keys
-
-	IFS=$' '
-	for key in $keys; do
-		json_select $key 2>/dev/null
-		json_get_var macaddr macaddr
-		json_select ..
-
-		[ "$macaddr" = "$mac" ] || continue
-
-		octet=$(echo $macaddr | cut -c1-2)
-		echo "$octet"
-	done
-}
-
-get_octet() {
-	ip=$1
-
-	res="$(ubus call router.net arp 2>/dev/null)"
-
-	json_load "$res"
-	json_select table 2>/dev/null
-	json_get_keys keys
-	IFS=$' '
-	for key in $keys; do
-		json_select $key 2>/dev/null
-		json_get_var ipaddr ipaddr
-		json_get_var macaddr macaddr
-		json_select ..
-
-		[ "$ipaddr" = "$ip" ] || continue
-
-		echo "$(assocl_match_mac $macaddr)"
-	done
-}
-
-# only get all first octets - use when parsing several MACS
-get_octets() {
-	octets=""
-	assoclist=""
-	neighbors=""
-
-	objects=$(ubus list | grep -E '.*\/wifix$')
-	[ -z "$objects" ] && return
-
-	for obj in $objects; do
-		ip=$(echo $obj | cut -d'/' -f1)
-		octet="$(get_octet $ip)"
-		[ "$octets" != "${octets/$octet/}" ] && continue
-		octets="$octet $octets"
-	done
-
-	echo "$octets"
-}
-
-# get only mobid - use when parsing several MACS
-get_mobid() {
-	mobid="500"
-
-	radios="$(ubus -t1 call wifix radios 2>/dev/null)"
-	[ -z "$radios" ] && return
-
-	json_load "$radios"
-	json_get_keys keys
-	IFS=$' '
-	for key in $keys; do
-		val="$(_get_mobid $key)"
-		[ -n "$val" ] && mobid=$val;
-	done
-
-	mobid=$(printf "%04x" $mobid)
-
-	# if little endian
-	if [ "$(echo -n I | hexdump -o | awk '{ print substr($2,6,1); exit}')" = "1" ]; then
-		oct2=${mobid:2}
-		oct3=${mobid%??}
-	else
-		oct2=${mobid%??}
-		oct3=${mobid:2}
-	fi
-
-	echo "$oct2 $oct3"
-}

wifilife/files/wifilife.init

@@ -7,55 +7,12 @@ ENABLE=/tmp/owsd_enable
 USE_PROCD=1
 EXTRA_COMMANDS="enable_check"
 
-# Check if 5g wifi interface is enabled or not
-is_5g_enabled()
-{
-	. /lib/functions.sh
-
-	found=0
-	radio=""
-	check_radio()
-	{
-		local disabled band
-		config_get_bool disabled $1 disabled "0"
-		[ "$disabled" == "1" ] && return
-
-		config_get band $1 band ""
-		[ "$band" == "a" ] && radio=$1
-	}
-
-	check_iface()
-	{
-		local disabled ifname
-		config_get_bool disabled $1 disabled "0"
-		[ "$disabled" == "1" ] && return
-
-		config_get ifname $1 ifname ""
-		[ "$ifname" == "$radio" ] && found=1
-	}
-
-	config_load wireless
-	config_foreach check_radio wifi-device
-
-	# not found
-	[ "$radio" == "" ] && return 1
-
-	config_foreach check_iface wifi-iface
-
-	[ $found -eq 1 ] && return 0 || return 1
-}
 
 start_service() {
 	[ "$(uci -q get wifilife.@wifilife[0].enabled)" == "0" ] && return
 
-	# only start wifilife when there is 5g interface enabled
-	if ! is_5g_enabled; then
-		return
-	fi
-
 	procd_open_instance
 	procd_set_param command ${PROG} -d -l -f -o /tmp/wifiagent.log
-	procd_set_param limits core="unlimited"
 	procd_set_param respawn
 	procd_close_instance
 
@@ -65,7 +22,6 @@ start_service() {
 	if [ "$enable" == "1" ]; then
 		echo $enable > $ENABLE
 		procd_set_param command ${PROG} -c -d -l -f -o /tmp/wificntlr.log
-		procd_set_param limits core="unlimited"
 	fi
 	procd_close_instance
 }
@@ -101,6 +57,5 @@ enable_check() {
 
 service_triggers() {
 	procd_add_config_trigger "config.change" "wifilife" /etc/init.d/wifilife reload
-	procd_add_config_trigger "config.change" "wireless" /etc/init.d/wifilife reload
 	procd_add_config_trigger "config.change" "owsd" /etc/init.d/wifilife enable_check
 }

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1961395cbf654305f0e08121d7119411913708cc
+PKG_SOURCE_VERSION:=659602bc62a244d5b53e452b7ee10ff846f03d01
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>