Redmine#27829 - easy-soc-libs: Use correct chipset defintions

The struct for passing ioctl() data does differ in size
(and offsets) on different platforms, hence we need to pass
the correct defines to the compiler.

Change-Id: If81a4bd79b21c5e93443e5ef48fb3f1b07058f60

ated/Makefile

@@ -0,0 +1,77 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -0,0 +1,27 @@
+if PACKAGE_libbbfdm
+
+config LIBBBFDM_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
+
+config BBF_TR181
+	bool "Compile with tr181 device features"
+	default y
+
+config BBF_TR104
+	bool "Compile with tr104 voice features"
+	default y
+
+config BBF_TR143
+	bool "Compile with tr143 diagnostics features"
+	default y
+
+config BBF_TR157
+	bool "Compile with tr157 bulkdata collector features"
+	default y
+	
+config BBF_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

bbf/Makefile

@@ -0,0 +1,126 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=1.6-2020-08-25
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=bfe14a431d408614ed30e2d831ebd927eab719e2
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libbbf_api
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for libbbfdm API
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
+define Package/libbbfdm
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libmbedtls
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104, TR143, TR157 and TR064 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CONFIGURE_ARGS += \
+	--enable-tr104
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_BBF_TR157),y)
+CONFIGURE_ARGS += \
+	--enable-tr157
+endif
+
+ifeq ($(CONFIG_BBF_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-tr064
+endif
+
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
+endif
+
+ifeq ($(CONFIG_PACKAGE_libmbedtls),y)
+CONFIGURE_ARGS += \
+	--enable-libmbedtls
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
+endef
+
+define Package/libbbfdm/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/dmtree/tr181/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/dmtree/tr157/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))

bbfdm/Config_bbfdm.in

@@ -1,35 +0,0 @@
-config BBF_VENDOR_EXTENSION
-	bool "Enable Vendor Extension"
-	default y
-
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_TR104
-	bool "Enable TR-104 Data Model Support"
-	default y
-
-config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
-	default y
-
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBFDM_ENABLE_JSON_PLUGIN
-	bool "Enable json plugin to extend datamodel"
-	default y
-
-config BBFDM_ENABLE_DOTSO_PLUGIN
-	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbfdm/Makefile

@@ -1,265 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.1.15
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=a3f4807ea6ae75e05eff18a519137927fb3dca9b
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
-	    +BBF_TR471:obudpst
-endef
-
-define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (default)
-  VARIANT:=default
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  VARIANT:=openssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  VARIANT:=wolfssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
-		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
-		   +PACKAGE_libbbfdm:libbbfdm
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR104 and TR143 data models
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-	-DBBF_WIFI_DATAELEMENTS=ON
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-endef
-
-define Package/libbbfdm/default/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-ifeq ($(CONFIG_BBF_TR143),y)
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-endif
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-endif
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-endif
-endef
-
-define Package/libbbfdm/default/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/src/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/json/input.json $(1)/etc/bbfdm/
-endef
-
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
-endef
-
-Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	# Work around for backward compatibility
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
-endef
-
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))
-$(eval $(call BuildPackage,bbfdmd))
-
-$(eval $(call BuildPackage,userinterface))

bbfdm/files/etc/config/bbfdm

@@ -1,7 +0,0 @@
-
-config bbfdmd 'bbfdmd'
-	option enabled '1'
-	option loglevel '1'
-	option refresh_time '0'
-	option transaction_timeout '30'
-

bbfdm/files/etc/config/userinterface

@@ -1,3 +0,0 @@
-config userinterface 'global'
-	option enable '1'
-

bbfdm/files/etc/firewall.portmap

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.dnat -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Now add rules as per datamodel precedence shown below
-		## Non empty remote host, empty dport
-		## empty remote host, non empty dport
-		## empty remote host, empty dport
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

bbfdm/files/etc/firewall.userinterface

@@ -1,125 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="UI-REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ] || [ ! -f "/etc/config/nginx" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-delete_ui_firewall_rules() {
-	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-}
-
-configure_ui_firewall_rule() {
-	local sec="${1}"
-	local enabled access interface
-	local port=""
-
-	config_get_bool enabled "${sec}" uci_enable '1'
-	config_get access "${sec}" uci_access ""
-	config_get interface "${sec}" uci_interface ""
-
-	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
-		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
-		for item in ${port_list}; do
-			if [ -z "${item##[0-9]*}" ]; then
-				port="${item}"
-				break
-			fi
-		done
-
-		if [ -z "${port}" ]; then
-			return 0
-		fi
-
-		zone="zone_${interface}_input"
-		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		zone="zone_${interface}_output"
-		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-	fi
-}
-
-# Delete existing remote access rules
-delete_ui_firewall_rules
-
-config_load userinterface
-config_get_bool serv_enable global enable 1
-
-if [ "${serv_enable}" -eq "1" ]; then
-	config_load nginx
-	# Configure the User Interface rule
-	config_foreach configure_ui_firewall_rule server
-fi

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -1,80 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enabled:bool:true' \
-		'debug:bool:false' \
-		'loglevel:uinteger' \
-		'sock:string' \
-		'refresh_time:uinteger' \
-		'transaction_timeout:uinteger' \
-		'subprocess_level:uinteger'
-}
-
-configure_bbfdmd()
-{
-	local enabled debug sock
-
-	config_load bbfdm
-
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enabled}" -eq 0 ] && return 0
-
-	[ ! -f "${BBFDM_JSON_INPUT}" ] && return 0
-
-	if [ -n "${loglevel}" ]; then
-		echo "$(jq --arg res ${loglevel} '.daemon.config += {"loglevel": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
-	fi
-
-	if [ -n "${refresh_time}" ]; then
-		echo "$(jq --arg res ${refresh_time} '.daemon.config += {"refresh_time": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
-	fi
-
-	if [ -n "${transaction_timeout}" ]; then
-		echo "$(jq --arg res ${transaction_timeout} '.daemon.config += {"transaction_timeout": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
-	fi
-
-	if [ -n "${subprocess_level}" ]; then
-		echo "$(jq --arg res ${subprocess_level} '.daemon.config += {"subprocess_level": $res}' ${BBFDM_JSON_INPUT})" > ${BBFDM_JSON_INPUT}
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/init.d/userinterface

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	if [ ! -f "/etc/config/nginx" ]; then
-		return 0
-	fi
-
-	if [ "${enable}" -eq "1" ]; then
-		ubus call service state '{"name":"nginx", "spawn":true}'
-	else
-		ubus call service state '{"name":"nginx", "spawn":false}'
-	fi
-
-	# Inject firewall rules
-	procd_open_instance userinterface
-	/etc/firewall.userinterface
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface" "nginx"
-}

bbfdm/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# This deletes the userinterface json plugin if exists in case of upgrade
-if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
-	rm /etc/bbfdm/json/UserInterface.json
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -1 +0,0 @@
-/etc/nginx/allow_host_*

bulkdata/Makefile

@@ -1,52 +0,0 @@
-#
-# Copyright (C) 2022 iopsys Software Solutions AB
-#
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.0
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=2dd55d9c9eb01ed1b11e16bad9e2c3e8badfffeb
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -1,6 +0,0 @@
-
-config bulkdata 'bulkdata'
-	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
-	option log_level '3'
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,31 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG="/usr/sbin/bulkdatad"
-
-start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	procd_open_instance bulkdata
-	[ "$enable" -eq "1" ] && {
-		procd_set_param command "$PROG"
-		procd_set_param respawn "3" "7" "0"
-	}
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start 
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger bulkdata
-}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

capiagent/Makefile

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=capiagent
-PKG_VERSION:=2.1.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3e671db8f567b19c109fc13b25bc571c4c73a962
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/capiagent.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-#define Package/capiagent/config
-#  source "$(SOURCE)/Config.in"
-#endef
-
-define Package/capiagent
-  TITLE+= capiagent (daemon implementing Wi-Fi Alliance's CAPI commands)
-  DEPENDS= +libubox +libuci +libubus +libnl-genl +libeasy +libwifi \
-	   +libjson-c +libblobmsg-json +ubus +libieee1905
-endef
-
-define Package/capiagent/description
- This package provides agent for the WiFi Alliance's CAPI specification.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_PATH:=src
-
-
-define Package/capiagent/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi/capi
-	$(CP) $(PKG_BUILD_DIR)/src/capiagent $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/scripts/* $(1)/lib/wifi/capi
-endef
-
-$(eval $(call BuildPackage,capiagent))

capiagent/files/etc/init.d/capiagent

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-        procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-	procd_set_param limits core="unlimited"
-#	procd_set_param respawn
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

catv/files/etc/init.d/catv

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
 
 START=71
 USE_PROCD=1

cifsd-tools/Makefile

@@ -0,0 +1,53 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=cifsd-tools
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/namjaejeon/cifsd-tools.git
+PKG_SOURCE_DATE:=2019-02-14
+PKG_SOURCE_VERSION:=a7d7dfc40524b88dbcb2052034a75f446b3cefdd
+PKG_MIRROR_HASH:=a74f95a79c3cdcc78e66c080729141abee0d821e21a326d88b11d849738314fb
+
+PKG_MAINTAINER:=Andy Walsh <andy.walsh44+github@gmail.com>
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+PKG_FIXUP:=autoreconf
+PKG_REMOVE_FILES:=autogen.sh aclocal.m4
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/cifsd-tools
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=Filesystem
+  TITLE:=Kernel CIFS/SMB server support and userspace tools
+  DEPENDS:=+kmod-fs-cifsd +glib2 +libnl-core +libnl-genl $(ICONV_DEPENDS)
+endef
+
+define Package/cifsd-tools/description
+  Userspace tools (cifsd, cifsadmin) for the CIFS/SMB kernel fileserver.
+  The config file location is /etc/cifs/smb.conf
+endef
+
+define Package/cifsd-tools/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcifsdtools.so* $(1)/usr/lib/
+
+	$(INSTALL_DIR) $(1)/etc/cifs
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/smb.conf.example $(1)/etc/cifs
+
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) ./files/cifsd.config $(1)/etc/config/cifsd
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/cifsd.init $(1)/etc/init.d/cifsd
+
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/{cifsadmin,cifsd} $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,cifsd-tools))

cifsd-tools/files/cifsd.config

@@ -0,0 +1,9 @@
+config global 'global'
+	option server_string	'CIFSD on OpenWRT'
+	option ipc_timeout	'8' # IPC timeout is used as a workaround for uninterruptible sleep until this is fixed upstream.
+
+config share
+	option name	'share'
+	option comment	'Default guest share'
+	option path	'/mnt'
+	option guest_ok	'yes'

cifsd-tools/files/cifsd.init

@@ -0,0 +1,161 @@
+#!/bin/sh /etc/rc.common
+
+START=90
+USE_PROCD=1
+PROG=/usr/sbin/cifsd
+USER_DB=/etc/cifs/cifsdpwd.db
+CIFS_ADMIN=cifsadmin
+
+EXTRA_COMMANDS="users"
+EXTRA_HELP="	users	Show list of users created by cifsadmin"
+
+users() {
+	[ -f "$USER_DB" ] && cut -d ':' $USER_DB -f1 || \
+		printf "No users available.\n"
+}
+
+validate_cifsd_global() {
+	uci_validate_section cifsd global global \
+		'server_string:string' \
+		'workgroup:string' \
+		'netbios_name:string' \
+		'interface:string' \
+		'ipc_timeout:uinteger'
+}
+
+validate_cifsd_share() {
+	uci_validate_section cifsd share "${1}" \
+		'name:string' \
+		'comment:string' \
+		'path:string' \
+		'guest_ok:bool' \
+		'read_only:bool' \
+		'allow_hosts:list' \
+		'deny_hosts:list' \
+		'users:string' \
+		'invalid_users:string' \
+		'create_mask:string' \
+		'dir_mask:string' \
+		'max_connections:uinteger' \
+		'veto_files:list'
+}
+
+validate_cifsd_users() {
+	uci_validate_section cifsd users "${1}" \
+		'user:string' \
+		'password:string' \
+		'desc:string'
+}
+
+load_cifsd_global() {
+	local server_string
+	local workgroup
+	local netbios_name
+	local ipc_timeout
+
+	validate_cifsd_global
+
+	echo -e "[global]" >> /var/etc/cifsd.conf
+	[ -n "$server_string" ] && echo -e "\tserver string = $server_string" >> /var/etc/cifsd.conf
+	[ -n "$workgroup" ] && echo -e "\tworkgroup = $workgroup" >> /var/etc/cifsd.conf
+	[ -n "$netbios_name" ] && echo -e "\tnetbios name = $netbios_name" >> /var/etc/cifsd.conf
+	[ -n "$ipc_timeout" ] && echo -e "\tipc timeout name = $ipc_timeout" >> /var/etc/cifsd.conf || \
+		echo -e "\tipc timeout name = 8" >> /var/etc/cifsd.conf
+}
+
+load_cifsd_share() {
+	local name
+	local comment
+	local path
+	local guest_ok
+	local allow_hosts
+	local deny_hosts
+	local users
+	local invalid_users
+	local max_connections
+	local veto_files
+	local dir_mask
+	local create_mask
+	local read_only
+
+	validate_cifsd_share ${1}
+
+	if [ -z "$name" -o -z "$path" ]; then
+		logread -t ${0} "Missing name or path."
+		return
+	fi
+
+	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/cifsd.conf
+	[ -n "$comment" ] && echo -e "\tcomment = $comment" >> /var/etc/cifsd.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/cifsd.conf
+	[ -n "$allow_hosts" ] && echo -e "\tallow hosts = $allow_hosts" >> /var/etc/cifsd.conf
+	[ -n "$deny_hosts" ] && echo -e "\tdeny hosts = $deny_hosts" >> /var/etc/cifsd.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/cifsd.conf
+	[ -n "$invalid_users" ] && echo -e "\tinvalid users = $invalid_users" >> /var/etc/cifsd.conf
+	[ -n "$max_connections" ] && echo -e "\tmax connections = $max_connections" >> /var/etc/cifsd.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/cifsd.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/cifsd.conf
+
+	if [ -n "$read_only" ]; then
+		echo -e "\tread only = $read_only" >> /var/etc/cifsd.conf
+		if [ "${read_only}" -eq "0" ]; then
+			echo -e "\twrite ok = 1" >> /var/etc/cifsd.conf
+		fi
+	else
+		echo -e "\twrite ok = 1" >> /var/etc/cifsd.conf
+	fi
+
+	[ -n "$veto_files" ] && echo -e "\tveto files = $veto_files" >> /var/etc/cifsd.conf
+}
+
+load_cifsd_users() {
+	local user
+	local password
+	local desc
+
+	validate_cifsd_users ${1}
+	[ $(which ${CIFS_ADMIN}) ] || {
+		logread -t ${0} "${CIFS_ADMIN} tools is not available"
+		return;
+	}
+
+	cifsadmin -a "${user}" -p "${password}"
+	if [ "$?" -ne 0 ]; then
+		logread -t ${0} "Failed to create/update ${user}"
+	fi
+}
+
+service_triggers()
+{
+	procd_add_config_trigger "config.change" "cifsd" /etc/init.d/cifsd restart
+}
+
+init_config() {
+	[ -f "/var/etc/cifsd.conf" ] && rm /var/etc/cifsd.conf
+
+	config_load cifsd
+	load_cifsd_global
+
+	# Delete existing users
+	[ -f "${USER_DB}" ] && {
+		rm -f "${USER_DB}"
+	}
+	config_foreach load_cifsd_users users
+	config_foreach load_cifsd_share share
+}
+
+start_service() {
+	. /lib/functions.sh
+	init_config
+
+	[ ! "$(grep cifsd /proc/modules)" ] && modprobe cifsd
+	procd_open_instance
+	procd_set_param command /usr/bin/env LANG=en_US.UTF-8 $PROG -c /var/etc/cifsd.conf
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service() {
+	killall cifsd
+	# IPC timeout will kill the remaining processes.
+}

cifsd/001-fix_implicit_declarations.patch

@@ -0,0 +1,73 @@
+For some reason, fs.h on Inteno kernel is missing inode->i_mutex nesting subclasses for the lock validator
+which is triggering implicit declaration error. To workaround this hardcore use of mutex_lock by removing
+kernel version check.
+---
+--- a/vfs.c
++++ b/vfs.c
+@@ -544,15 +544,9 @@ int cifsd_vfs_setattr(struct cifsd_work
+ 
+ 	attrs->ia_valid |= ATTR_CTIME;
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock(inode);
+-	err = notify_change(dentry, attrs, NULL);
+-	inode_unlock(inode);
+-#else
+ 	mutex_lock(&inode->i_mutex);
+ 	err = notify_change(dentry, attrs, NULL);
+ 	mutex_unlock(&inode->i_mutex);
+-#endif
+ 
+ 	if (update_size)
+ 		put_write_access(inode);
+@@ -753,11 +747,8 @@ int cifsd_vfs_remove_file(char *name)
+ 	if (!dir->d_inode)
+ 		goto out;
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock_nested(dir->d_inode, I_MUTEX_PARENT);
+-#else
+ 	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
+-#endif
++
+ 	dentry = lookup_one_len(last, dir, strlen(last));
+ 	if (IS_ERR(dentry)) {
+ 		err = PTR_ERR(dentry);
+@@ -783,11 +774,7 @@ int cifsd_vfs_remove_file(char *name)
+ 
+ 	dput(dentry);
+ out_err:
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_unlock(dir->d_inode);
+-#else
+ 	mutex_unlock(&dir->d_inode->i_mutex);
+-#endif
+ out:
+ 	path_put(&parent);
+ 	return err;
+@@ -1302,11 +1289,8 @@ int cifsd_vfs_unlink(struct dentry *dir,
+ 	int err = 0;
+ 
+ 	dget(dentry);
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock(dir->d_inode);
+-#else
+ 	mutex_lock(&dir->d_inode->i_mutex);
+-#endif
++
+ 	if (!dentry->d_inode || !dentry->d_inode->i_nlink) {
+ 		err = -ENOENT;
+ 		goto out;
+@@ -1318,11 +1302,8 @@ int cifsd_vfs_unlink(struct dentry *dir,
+ 		err = vfs_unlink(dir->d_inode, dentry, NULL);
+ 
+ out:
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_unlock(dir->d_inode);
+-#else
+ 	mutex_unlock(&dir->d_inode->i_mutex);
+-#endif
++
+ 	dput(dentry);
+ 	if (err)
+ 		cifsd_debug("failed to delete, err %d\n", err);

cifsd/Makefile

@@ -0,0 +1,60 @@
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=cifsd
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/namjaejeon/cifsd.git
+PKG_SOURCE_DATE:=2019-03-05
+PKG_SOURCE_VERSION:=e1715ce125d55b125b1b58a6f1819ef8e54cc3ba
+PKG_MIRROR_HASH:=521585ebfda0ecc02372b1a38ebf762fbbcead6d0b754a47599a5bf6bfdb3fb6
+
+PKG_MAINTAINER:=Andy Walsh <andy.walsh44+github@gmail.com>
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/fs-cifsd
+	SUBMENU:=Filesystems
+	TITLE:=CIFS/SMB kernel server support
+	FILES:=$(PKG_BUILD_DIR)/cifsd.$(LINUX_KMOD_SUFFIX)
+	DEPENDS+= \
+		+kmod-nls-base \
+		+kmod-nls-utf8 \
+		+kmod-crypto-md4 \
+		+kmod-crypto-md5 \
+		+kmod-crypto-hmac \
+		+kmod-crypto-ecb \
+		+kmod-crypto-des \
+		+kmod-crypto-sha256 \
+		+kmod-crypto-cmac \
+		+kmod-crypto-sha512 \
+		+kmod-crypto-aead \
+		+kmod-crypto-ccm
+	KCONFIG:= \
+		CONFIG_KEYS=y \
+		CONFIG_CRYPTO_ARC4=y
+endef
+
+define KernelPackage/fs-cifsd/description
+	Kernel module for a CIFS/SMBv2,3 fileserver.
+endef
+
+TARGET_CFLAGS+= -DCONFIG_CIFSD_ACL
+
+MAKE_OPTS:=\
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	M="$(PKG_BUILD_DIR)"
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		$(MAKE_OPTS) \
+		CFLAGS="$(TARGET_CFLAGS)" \
+		CONFIG_CIFS_SERVER=m \
+		modules
+endef
+
+$(eval $(call KernelPackage,fs-cifsd))

cifsd/patches/001-fix_implicit_declarations.patch

@@ -0,0 +1,69 @@
+--- a/vfs.c
++++ b/vfs.c
+@@ -544,15 +544,9 @@ int cifsd_vfs_setattr(struct cifsd_work
+ 
+ 	attrs->ia_valid |= ATTR_CTIME;
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock(inode);
+-	err = notify_change(dentry, attrs, NULL);
+-	inode_unlock(inode);
+-#else
+ 	mutex_lock(&inode->i_mutex);
+ 	err = notify_change(dentry, attrs, NULL);
+ 	mutex_unlock(&inode->i_mutex);
+-#endif
+ 
+ 	if (update_size)
+ 		put_write_access(inode);
+@@ -753,11 +747,8 @@ int cifsd_vfs_remove_file(char *name)
+ 	if (!dir->d_inode)
+ 		goto out;
+ 
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock_nested(dir->d_inode, I_MUTEX_PARENT);
+-#else
+ 	mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
+-#endif
++
+ 	dentry = lookup_one_len(last, dir, strlen(last));
+ 	if (IS_ERR(dentry)) {
+ 		err = PTR_ERR(dentry);
+@@ -783,11 +774,7 @@ int cifsd_vfs_remove_file(char *name)
+ 
+ 	dput(dentry);
+ out_err:
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_unlock(dir->d_inode);
+-#else
+ 	mutex_unlock(&dir->d_inode->i_mutex);
+-#endif
+ out:
+ 	path_put(&parent);
+ 	return err;
+@@ -1302,11 +1289,8 @@ int cifsd_vfs_unlink(struct dentry *dir,
+ 	int err = 0;
+ 
+ 	dget(dentry);
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_lock(dir->d_inode);
+-#else
+ 	mutex_lock(&dir->d_inode->i_mutex);
+-#endif
++
+ 	if (!dentry->d_inode || !dentry->d_inode->i_nlink) {
+ 		err = -ENOENT;
+ 		goto out;
+@@ -1318,11 +1302,8 @@ int cifsd_vfs_unlink(struct dentry *dir,
+ 		err = vfs_unlink(dir->d_inode, dentry, NULL);
+ 
+ out:
+-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0)
+-	inode_unlock(dir->d_inode);
+-#else
+ 	mutex_unlock(&dir->d_inode->i_mutex);
+-#endif
++
+ 	dput(dentry);
+ 	if (err)
+ 		cifsd_debug("failed to delete, err %d\n", err);

crashlog/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 2
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=4.0.2.8
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=147d5d63cd4eec40bbfe25cf8af201df620b5a23
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

decollector/files/decollector.init

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/decollector
-
-service_running() {
-	ubus -t 2 wait_for ieee1905 ieee1905.map topology
-}
-
-start_service() {
-	sleep 3
-	[ -e "/etc/config/mapcontroller" ] && {
-		local en
-
-		config_load mapcontroller
-		config_get en controller enabled "0"
-		config_get collect_int controller de_collect_interval
-
-		[ $en -gt 0 ] && {
-			procd_open_instance
-			procd_set_param command "$PROG" "-d" "${collect_int:+-t $collect_int}"
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_set_param respawn
-			procd_close_instance
-		}
-	}
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger mapcontroller
-}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dectmngr
-PKG_RELEASE:=3
-PKG_VERSION:=3.5.17
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3e2eeaf2e5ed25d2ec31ee3878e9fe58eeaf4f78
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
- 	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
-endef
-
-define Package/$(PKG_NAME)/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +0,0 @@
-config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -1,137 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
-
-DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
-
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
-		sleep 1
-	done
-}
-
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-	local rxtun=
-
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
-
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
-
-	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
-
-	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	file)
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	esac
-
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	has_dect || return 0
-
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	ubus call dect reload
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
-}
-
-boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dectmngr2/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.3.0
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_NAME:=dectmngr2
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent endptmngr
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+
+# Workaround for product DG400 which has an
+# incorrect value in nvram from factory.
+
+if [ -e "/proc/nvram/BoardId" ]; then
+	boardid=$(cat /proc/nvram/BoardId)
+	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
+
+	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
+		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
+
+		db -q batch <<-EOT
+			set hw.board.has_dect=1
+			commit hw.board
+		EOT
+	fi
+fi
+
+
+exit 0
+

dslmngr/Makefile

@@ -8,15 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.0.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=43dec92b1c86be7859521da337e7bd1168848b26
+PKG_SOURCE_VERSION:=63525fe43aa57a710bb097e4c0ed496c4032db6d
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -26,8 +25,16 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
   TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -38,7 +45,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/dslmngr/description
@@ -68,10 +75,6 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,45 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	local HASADSL="$(db -q get hw.board.hasAdsl)"
-	local HASVDSL="$(db -q get hw.board.hasVdsl)"
-	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
-
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_brcm63xx_mips)
 endef
 
 define Package/easy-qos/description
@@ -39,7 +39,11 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;

easy-soc-events/Makefile

@@ -11,7 +11,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
 PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
@@ -19,7 +18,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +84,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,23 @@
+if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
+menu "configurations"
+
+config IOP_LLA_LIBS_DEBUG
+	bool "Enable debugging support"
+	default n
+
+config LIBWIFI_DEBUG
+	depends on PACKAGE_libwifi
+	bool "Enable wifi debugging"
+	default n
+
+config LIBDSL_DEBUG
+	depends on PACKAGE_libdsl
+	bool "Enable xdsl debugging"
+	default n
+
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
+endmenu
+endif

easy-soc-libs/Makefile

@@ -0,0 +1,207 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=3.3.12
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=f508577fae01c4820fad884a5a0847d26104721c
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS easy SoC libraries
+  SUBMENU:=IOPSYS easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+define Package/libwifi/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138 \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+  ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm_panther),y)
+    TARGET_CFLAGS +=-DCONFIG_BCM96846
+  else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm_tiger),y)
+    TARGET_CFLAGS +=-DCONFIG_BCM96858
+  else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm_eagle),y)
+    TARGET_CFLAGS +=-DCONFIG_BCM963178
+  else
+    TARGET_CFLAGS +=-DCONFIG_BCM963138
+  endif
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+  TARGET_CFLAGS +=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+ifdef CONFIG_IOP_LLA_LIBS_DEBUG
+  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
+endif
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
+endef
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Build/Compile
+	$(call Build/Compile/Default)
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(call BuildPackage,libeasy))
+$(eval $(call BuildPackage,libwifi))
+$(eval $(call BuildPackage,libdsl))
+$(eval $(call BuildPackage,libethernet))

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.3
+PKG_SOURCE_VERSION:=34ae1996beda98691d779e49f231bd662fc87cda
+PKG_LICENSE:=MIT
+PKG_LICENSE_FILES:=LICENSE
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://download.iopsys.eu/iopsys/opensdk/
+PKG_NAME:=endptmngr-open
+PATCH_DIR:=
+else
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_NAME:=endptmngr
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+endif
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Brcmslic
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +bcmkernel @TARGET_HAS_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
+endef
+
+endif
+
+
+define Package/endptmngr/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

ethmngr/Makefile

@@ -5,14 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.0
+PKG_VERSION:=1.0.4
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_VERSION:=b7135381aedf1bde6f7ab10b41be372a9bd7d155
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
@@ -23,7 +22,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,22 +36,10 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca),)
-	$(CP) ./files/broadcom/* $(1)/
-else
-	$(CP) ./files/linux/* $(1)/
-endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -1,144 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Speed Capabilities' | awk '{print$NF}')"
-	local speed=1000
-
-	case "$phycap" in
-		10GFD*) speed=10000 ;;
-		5GFD*) speed=5000 ;;
-		2.5GFD*) speed=2500 ;;
-		1GFD*) speed=1000 ;;
-		100MFD*|100MHD*) speed=100 ;;
-		10MFD*|10MHD*) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port name, ex: eth0
-get_port_number() {
-	[ -z "$1" ] && return
-	local ports="0 1 2 3 4 5 6 7 8"
-	local units="0 1"
-	local port="$1"
-	local ifname
-
-	for unit in $units; do
-		for prt in $ports; do
-			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
-			if [ "$ifname" == "$port" ]; then
-				echo "$unit $prt"
-				return
-			fi
-		done
-	done
-}
-
-# arg1: port ifname, ex: eth0
-reset_port() {
-        local ifname="$1"
-        ethctl $ifname phy-reset >/dev/null
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ethctl $ifname phy-power $updown >/dev/null
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	local unitport="$(get_port_number $ifname)"
-	local unit=$(echo $unitport | cut -d ' ' -f 1)
-	local port=$(echo $unitport | cut -d ' ' -f 2)
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	[ "$duplex" == "half" ] && duplex=0 || duplex=1
-	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
-	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
-
-	phycaps="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Speed Capabilities' | awk '{print$NF}')"
-	numofcaps="$(echo $phycaps | tr ':' ' ' | wc -w)"
-
-        # Reset the port before setting new params
-        reset_port $ifname
-
-	if [ "$numofcaps" == "1" ]; then
-		logger -t "ethmngr" "$ifname is capable of $phycaps only; not setting speed/duplex"
-	else
-		logger -t "ethmngr" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
-		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
-	fi
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-	if [ "$auto" == "on" ]; then
-		# Use ethswctl utility to set pause autoneg
-		# as ethtool is not setting it properly
-		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
-	else
-		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-	fi
-
-	power_updown $ifname $enabled
-}

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-populate_config_from_db() {
-	. /lib/functions.sh
-	. /lib/network/utils.sh
-	include /lib/ethernet
-
-	portorder="$(db -q get hw.board.ethernetPortOrder)"
-	for port in $portorder; do
-		speed="$(get_max_port_speed $port 2>/dev/null)"
-		speed="${speed:-1000}"
-
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$(get_port_name $port)"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$(get_port_name $port)"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-
-	uci commit ports
-}
-
-populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
-		[ -n "$port" ] || continue
-		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
-		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$PORT"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$PORT"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$port" = "wan" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-	uci commit ports
-}
-
-if [ -s "/etc/config/ports" ]; then
-	if uci -q get ports.@ethport[0] >/dev/null; then
-		# exit if there is any valid content
-		exit 0
-	else
-		rm -f /etc/config/ports
-	fi
-fi
-
-touch /etc/config/ports
-
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
-	populate_config_from_db
-elif [ -d /proc/device-tree/ ]; then
-	populate_config_from_device_tree
-fi

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -1,95 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 00 | tail -n 1 | awk '{print$NF}')"
-	local speed=1000
-
-	case "$phycap" in
-		10000*) speed=10000 ;;
-		5000*) speed=5000 ;;
-		2500*) speed=2500 ;;
-		1000*) speed=1000 ;;
-		100*) speed=100 ;;
-		10*) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ip link set dev $ifname $updown
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-
-	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-
-	power_updown $ifname $enabled
-}

fdtextract/Makefile

@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gryphon-led-module/Makefile

@@ -28,7 +28,6 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,9 +40,6 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -43,18 +43,12 @@
 static ssize_t get_led_color(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	/* [ln] todo: dummy implementation */
 	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
 
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
+	len = sprintf(buf, "%d\n", 123);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
 	}
 
 	return len;
@@ -105,69 +99,8 @@ static ssize_t set_led_color(struct device *dev,
 }
 static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
 
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
 static struct attribute *sk9822_dev_attrs[] = {
 	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
 	 NULL
 };
 
@@ -196,8 +129,6 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		dev_warn(&pdev->dev, "Could not read led-count property\n");
 		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	} else {
-		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
 	}
 
 	leds->led_colors = devm_kzalloc(&pdev->dev,
@@ -209,7 +140,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, leds);
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
@@ -217,23 +148,19 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	}
 
 	gpiod_direction_output(leds->clock_gpio, 1);
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
 		gpiod_set_value(leds->clock_gpio, 0);
 	}
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+#if LINUX_VERSION_CODE <= KERNEL_VERSION(3, 16, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
 #elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
 	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
@@ -241,16 +168,12 @@ static int canyon_led_probe(struct platform_device *pdev)
 	dev_warn(&pdev->dev, "Kernel version Not supported\n");
 	exit(1);
 #endif
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	}
 
 	gpiod_direction_output(leds->data_gpio, 1);
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

icwmp/Config_cwmp.in

@@ -0,0 +1,27 @@
+if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
+
+config CWMP_SCRIPTS_FULL
+	bool "Install all icwmp scripts"
+	default y
+
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+    
+endif
+

icwmp/Makefile

@@ -1,83 +1,107 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2019 iopsys Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.3.8.1
-
+PKG_VERSION:=4.0-2020-06-25
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=4f4a43b31d5ff18ee5814acc21683dc30eaa6b33
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
+PKG_SOURCE_VERSION:=7a6da73ae20abc27baf3aa4c1b2c1c0c0ecac82e
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/icwmp_stun
   SECTION:=utils
   CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbfdm-api
+  TITLE:=TR-069 stun Client
+  DEPENDS:=+PACKAGE_icwmp_stun:libubus +PACKAGE_icwmp_stun:libuci +PACKAGE_icwmp_stun:libubox +PACKAGE_icwmp_stun:libjson-c +PACKAGE_icwmp_stun:libopenssl +PACKAGE_icwmp_stun:libblobmsg-json
 endef
 
-define Package/icwmp
-  $(Package/icwmp/default)
-  VARIANT:=default
-  DEFAULT_VARIANT:=1
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+define Package/icwmp_xmpp
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 xmpp feature
+  DEPENDS:=+PACKAGE_icwmp_xmpp:libuci +PACKAGE_icwmp_xmpp:libubox +PACKAGE_icwmp_xmpp:libexpat +PACKAGE_icwmp_xmpp:libstrophe
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  VARIANT:=openssl
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-wolfssl
+define Package/icwmp_twamp
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 twamp feature
+  DEPENDS:=+PACKAGE_icwmp_twamp:libuci
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  VARIANT:=wolfssl
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-openssl
+define Package/icwmp_udpechoserver
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 udpechoserver feature
+  DEPENDS:=+PACKAGE_icwmp_udpechoserver:libuci
 endef
 
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := icwmp icwmp-wolfssl icwmp-openssl
+define Package/icwmp_bulkdata
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=TR-069 BulkData Collection
+  DEPENDS:=+PACKAGE_icwmp_bulkdata:libubus +PACKAGE_icwmp_bulkdata:libuci +PACKAGE_icwmp_bulkdata:libubox +PACKAGE_icwmp_bulkdata:libjson-c +PACKAGE_icwmp_bulkdata:libcurl +PACKAGE_icwmp_bulkdata:curl +PACKAGE_icwmp_bulkdata:libblobmsg-json +PACKAGE_icwmp_bulkdata:libbbfdm
 endef
 
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
+define Package/icwmp-tr098
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=CWMP client for TR-098 Data Model
+  DEPENDS:=+PACKAGE_icwmp-tr098:libuci +PACKAGE_icwmp-tr098:libmicroxml +PACKAGE_icwmp-tr098:libubox +PACKAGE_icwmp-tr098:jshn +PACKAGE_icwmp-tr098:libubus +PACKAGE_icwmp-tr098:libblobmsg-json +PACKAGE_icwmp-tr098:libpthread +PACKAGE_icwmp-tr098:ubusd +PACKAGE_icwmp-tr098:shflags +PACKAGE_icwmp-tr098:getopt +PACKAGE_icwmp-tr098:zlib +PACKAGE_icwmp-tr098:libjson-c +PACKAGE_icwmp-tr098:libopenssl +PACKAGE_icwmp-tr098:curl +PACKAGE_icwmp-tr098:libcurl +PACKAGE_icwmp-tr098:libtr098
+endef
 
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
+define Package/icwmp/Default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libbbfdm  +libbbf_api
+endef
 
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
+define Package/icwmp/description
+ A free client implementation of CWMP (TR-069) protocol
+endef
 
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
+define Package/icwmp-curl
+  $(call Package/icwmp/Default)
+  TITLE+= (using libcurl)
+  DEPENDS+= +PACKAGE_icwmp-curl:libcurl
+  VARIANT:=curl
+endef
+
+define Package/icwmp-zstream
+  $(call Package/icwmp/Default)
+  TITLE+= (using libzstream)
+  DEPENDS+= +PACKAGE_icwmp-zstream:libzstream
+  VARIANT:=zstream
+endef
+
+define Package/icwmp-curl/config
+	source "$(SOURCE)/Config_cwmp.in"
+endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
@@ -86,36 +110,183 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifeq ($(CONFIG_PACKAGE_icwmp-tr098),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_tr098
+endif
+
+ifeq ($(CONFIG_PACKAGE_icwmp_xmpp),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_xmpp
+endif
+
+ifeq ($(CONFIG_PACKAGE_icwmp_stun),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_stun
+endif
+
+ifeq ($(CONFIG_PACKAGE_icwmp_udpechoserver),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_udpechoserver
+endif
+
+ifeq ($(CONFIG_PACKAGE_icwmp_twamp),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_twamp
+endif
+
+ifeq ($(CONFIG_PACKAGE_icwmp_bulkdata),y)
+CONFIGURE_ARGS += \
+	--enable-icwmp_bulkdata
+endif
+
+ifneq ($(CWMP_REVISION)_,_)
+ifneq ($(CWMP_REVISION),exported)
+ifneq ($(CWMP_REVISION),Unversioned directory)
+TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+endif
+endif
+endif
+
+TARGET_LDFLAGS += \
+	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
+
+CONFIGURE_ARGS += \
+	--with-uci-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubus-include-path=$(STAGING_DIR)/usr/include
+	
+ifeq ($(BUILD_VARIANT),zstream)
+CONFIGURE_ARGS += \
+	--enable-http=zstream \
+	--with-zstream-include-path=$(STAGING_DIR)/usr/include
+endif
+
+ifeq ($(BUILD_VARIANT),curl)
+CONFIGURE_ARGS += \
+	--enable-http=curl
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libcwmpdm.so $(1)/usr/lib/bbfdm/libcwmpdm.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
-	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
-	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
-	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/* $(1)/etc/uci-defaults/
+ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
+	$(INSTALL_DIR) $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+endif
+	$(CP) ./files/* $(1)/
 endef
 
-Package/icwmp/install = $(Package/icwmp/default/install)
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
+define Package/icwmp-tr098/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmp_tr098d $(1)/usr/sbin
+endef
 
-$(eval $(call BuildPackage,icwmp))
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+define Package/icwmp_stun/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
+endef
+
+define Package/icwmp_xmpp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
+	$(CP) ./xmpp-files/* $(1)/
+endef
+
+define Package/icwmp_udpechoserver/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_udpechoserverd $(1)/usr/sbin/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_udpechoserverd $(1)/etc/init.d/icwmp_udpechoserverd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_udpechoserver $(1)/etc/config
+endef
+
+define Package/icwmp_twamp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_twampd $(1)/usr/sbin/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_twampd $(1)/etc/init.d/icwmp_twampd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_twamp $(1)/etc/config
+endef
+
+define Package/icwmp_bulkdata/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_bulkdatad $(1)/usr/sbin/icwmp_bulkdatad
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_bulkdatad $(1)/etc/init.d/icwmp_bulkdatad
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_bulkdata $(1)/etc/config
+endef
+
+define Package/icwmp-$(BUILD_VARIANT)/postinst
+	#!/bin/sh
+	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Enabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd enable
+	fi
+	exit 0
+endef
+
+define Package/icwmp-$(BUILD_VARIANT)/prerm
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Disabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd disable
+	fi
+	exit 0
+endef
+
+$(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,icwmp_stun))
+$(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp_udpechoserver))
+$(eval $(call BuildPackage,icwmp_twamp))
+$(eval $(call BuildPackage,icwmp_bulkdata))
+$(eval $(call BuildPackage,icwmp-tr098))
+#$(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -1,44 +0,0 @@
-config acs 'acs'
-	option userid '' #$OUI-$SER
-	option passwd 'iopsys'
-	option periodic_inform_enable 'true'
-	option periodic_inform_interval '1800'
-	option periodic_inform_time '0001-01-01T00:00:00Z'
-	option dhcp_discovery 'enable'
-	# compression possible configs: GZIP, Deflate, Disabled
-	option compression 'Disabled'
-	#­ possible configs interval :[1:65535]
-	option retry_min_wait_interval '5'
-	#­ possible configs interval :[1000:65535]
-	option retry_interval_multiplier '2000'
-
-config cpe 'cpe'
-	option enable '1'
-	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
-	option log_to_console 'disable'
-	option log_to_file 'disable'
-	# log_severity: INFO (Default)	
-	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
-	option log_severity 'INFO'
-	option log_file_name '/var/log/icwmpd.log'
-	option log_max_size '102400'
-	option userid '' #$OUI-$SER
-	option passwd 'iopsys'
-	option port '7547'
-	option provisioning_code ''
-	option amd_version '5'
-	# compression possible configs: InstanceNumber, InstanceAlias
-	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
-	option notification '1'
-	option exec_download '0'
-	option periodic_notify_enable '1'
-	option periodic_notify_interval '10'
-	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
-	
-config lwn 'lwn'
-	option enable '1'
-	option hostname ''
-	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -1,80 +0,0 @@
-#!/bin/sh
-
-#created by the icwmp package
-log() {
-	echo "${@}"|logger -t firewall.cwmp -p info
-}
-
-if [ ! -f "/var/state/icwmp" ]; then
-	exit 0;
-fi
-
-zone_name=$(uci -c /var/state -q get icwmp.acs.zonename)
-port=$(uci -q get cwmp.cpe.port)
-ipaddr=$(uci -c /var/state -q get icwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get icwmp.acs.ip6)
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
-
-if [ -z "${zone_name}" ]; then
-	log "empty firewall zone name"
-	exit 0
-elif [ "$zone_name" = "icwmp" ]; then
-	iptables -nL zone_icwmp_input 2> /dev/null
-	if [ "$?" != 0 ]; then
-		iptables -w 1 -N zone_icwmp_input
-		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
-	else			
-		iptables -w 1 -F zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
-	fi			
-else
-	iptables -w 1 -F zone_icwmp_input 2> /dev/null
-	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
-	iptables -w 1 -X zone_icwmp_input 2> /dev/null
-fi
-
-cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
-cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
-
-# default incoming rule is Port only
-if [ -z "${incoming_rule}" ]; then
-	incoming_rule="port_only"
-fi
-
-if [ "${incoming_rule}" = "ip_only" ]; then
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-elif [ "${incoming_rule}" = "port_only" ]; then
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-else
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-fi
-
-echo "${cmd}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd}
-fi
-
-echo "${cmd6}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd6}
-fi
-
-uci -c /var/state -q set icwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit icwmp

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+. /lib/functions/network.sh
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+[ -f /etc/config/cwmp ] || exit 0
+
+handle_icwmp_restart() {
+	[ -f /tmp/switching_mode ] && exit 0
+	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
+
+	[ "$INTERFACE" == "loopback" ] && exit 0
+
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0
+
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0
+
+	local ifname="$(uci -q get network.$INTERFACE.ifname)"
+	[ "${ifname:0:1}" == "@" ] && exit 0
+
+	mkdir -p /tmp/ipv4
+
+	network_flush_cache
+
+	local previpaddr=""
+	local curipaddr=""
+	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+	previpaddr=$(cat $ipaddrfile 2>/dev/null)
+	network_get_ipaddr curipaddr $INTERFACE
+	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+	local prevgateway=""
+	local curgateway=""
+	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+	prevgateway=$(cat $gatewayfile 2>/dev/null)
+	network_get_gateway curgateway $INTERFACE
+	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+	local prevsubnets=""
+	local cursubnets=""
+	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+	prevsubnets=$(cat $subnetsfile 2>/dev/null)
+	network_get_subnets cursubnets $INTERFACE
+	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+	local prevdnsservers=""
+	local curdnsservers=""
+	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
+	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
+	network_get_dnsserver curdnsservers $INTERFACE
+	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
+
+	local prevdev=""
+	local curdev=""
+	local devfile=/tmp/ipv4/$INTERFACE-dev
+	prevdev=$(cat $devfile 2>/dev/null)
+	network_get_device curdev $INTERFACE
+	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
+
+	local prevopt43url=""
+	local curopt43url=""
+	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
+	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
+	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
+	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
+
+	[ \
+		"$prevdev" == "$curdev" -a \
+		"$previpaddr" = "$curipaddr" -a \
+		"$prevgateway" = "$curgateway" -a \
+		"$prevsubnets" = "$cursubnets" -a \
+		"$prevdnsservers" = "$curdnsservers" \
+	] && {
+		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
+		[ -z "$prevopt43url" ] && exit 0
+	}
+
+	/etc/init.d/icwmpd reload &
+}
+
+handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -1,34 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-log() {
-	echo "$@" |logger -t cwmp.update -p info
-}
-
-handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
-
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
-
-	# wait for some time to avoid interface fluctuation
-	sleep 10
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
-
-	if [ "$ret" = "true" ]; then
-		# read status from var/state/icwmp
-		status=$(uci -q -c /var/state get icwmp.sess_status.current_status)
-		if [ "$status" != "running" ]; then
-			log "Trigger out of bound inform, since last inform status was failure"
-			ubus -t 10 call tr069 inform >/dev/null 2>&1
-		fi
-	else
-		log "Restarting icwmp tr069 object"
-		/etc/init.d/icwmpd restart
-	fi
-}
-
-handle_icwmp_update "$@"

icwmp/files/etc/init.d/icwmpd

@@ -1,504 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015-2019 iopsys Software Solutions AB
-
-START=99
-STOP=00
-
-USE_PROCD=1
-PROG="/usr/sbin/icwmpd"
-
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-include /lib/network
-
-log() {
-	echo "${@}"|logger -t cwmp.init -p info
-}
-
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
-
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
-
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls "${cert_dir}"/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
-	fi
-
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls "${cert_dir}"/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
-	fi
-}
-
-enable_dhcp_option43() {
-	local wan="${1}"
-
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
-	for ropt in $reqopts; do
-		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
-		uci commit network
-		ubus call network reload
-	fi
-}
-
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
-
-	echo "${val}"
-}
-
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
-
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
-
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ "${oui_len}" -eq 0 ] || [ "${serial_len}" -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ "${class_len}" -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ "${class_len}" -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network."${intf}".sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp."${intf}".dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp."${lan}".dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp."${lan}".dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
-				break
-			fi
-		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		fi
-	fi
-}
-
-enable_dhcp_option125() {
-	local wan="${1}"
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local sendopts="$(uci -q get network."${wan}".sendopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" = "dhcp" ]; then
-		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
-			uci -q set network."${wan}".reqopts="$newreqopts"
-			network_uci_update=1
-		fi
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "${sendopts}" "${wan}" "network"
-			network_uci_update=1
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
-	fi
-}
-
-wait_for_resolvfile() {
-	local time=$1
-	local tm=1
-
-	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
-	[ -n "$resolvfile" ] || return
-
-	while [ ! -f "$resolvfile" ]; do
-		sleep 1
-		[ "$tm" -ge "$time" ] && break
-		tm=$((tm+1))
-	done
-}
-
-copy_cwmp_etc_files_to_varstate() {
-	mkdir -p /var/run/icwmpd
-
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
-	fi
-}
-
-copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
-	fi
-
-	# move the successful custom notify import marker to persistent storage
-	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
-		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string' \
-		'dhcp_discovery:string' \
-		'dhcp_url:string' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'ssl_capath:string'
-
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'enable:bool' \
-		'periodic_notify_interval:uinteger'
-}
-
-validate_defaults() {
-	local ssl_capath
-	config_load cwmp
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-
-	ssl_capath="${ssl_capath%/}"
-	# Put the cert pem file in keep list
-	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
-			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
-		fi
-	fi
-
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-
-	return 0;
-}
-
-boot() {
-	local enable_cwmp="0"
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-	local wan_interface=""
-	
-	config_get wan_interface cpe default_wan_interface "wan"
-	
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
-	fi
-
-	config_get dhcp_discovery acs dhcp_discovery "0"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-		# Set dhcp option 60
-		set_vendor_id "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_dhcp_option125 "${wan_interface}"
-		enable_dnsmasq_option125 "${lan_interface}"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	# Copy backup data so that if it restart latter on, it gets the info
-	copy_cwmp_etc_files_to_varstate
-	mkdir -p /var/run/icwmpd/
-	touch /var/run/icwmpd/cwmp
-
-	start
-}
-
-start_service() {
-	local enable_cwmp
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
-	fi
-
-	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-
-	validate_defaults || {
-		log "Validation of defaults failed"
-		return 1;
-	}
-
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	procd_append_param command -b
-	procd_set_param respawn \
-		"${respawn_threshold:-5}" \
-		"${respawn_timeout:-10}" "${respawn_retry:-3}"
-
-	procd_set_param watch network.interface
-	procd_close_instance
-}
-
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
-}
-
-reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so returning
-		return 0
-	fi
-
-	status="$(echo "${tr069_status}" | jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
-		log "Restarting CWMP client"
-		stop
-		start
-	fi
-}
-
-add_interface_trigger() {
-        procd_add_interface_trigger "interface.update" "$1" /etc/icwmpd/update.sh
-}
-
-service_triggers() {
-       local wan_interface
-
-       config_load cwmp
-       config_get wan_interface cpe default_wan_interface "wan"
-
-       procd_add_reload_trigger "cwmp"
-       add_interface_trigger ${default_wan_interface}
-}
-

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,41 +1,24 @@
-#!/bin/sh
 
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
-# Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
-if [ -z "${oui}" ]; then
-	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-fi
 
-oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+# Get factory base MAC.
+baseMac=$(db -q get hw.board.basemac)
+
+# Erase colon and space characters.
+baseMac=${baseMac//:/}
+baseMac=${baseMac// /}
+
+# Caseing and fixed length string.
+mac=$(printf "%12.12X" $((0x$baseMac)))
 
 # Get system serial number.
-config_get serial cpe serial_number ""
-if [ -z "${serial}" ]; then
-	serial=$(db -q get device.deviceinfo.SerialNumber)
-fi
+serial=$(db -q get hw.board.serial_number)
 
-# Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+uci -q batch <<-EOF
+	set cwmp.acs.userid="${mac:0:6}-${serial}"
+	set cwmp.cpe.userid="${mac:0:6}-${serial}"
+EOF
 
-# Only set if they are empty
-if [ -z "${acs_userid}" ]; then
-    uci -q set cwmp.acs.userid="${oui}-${serial}"
-fi
-
-if [ -z "${cpe_userid}" ]; then
-    uci -q set cwmp.cpe.userid="${oui}-${serial}"
-fi
-
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
-fi
 
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-cwmpfirewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.cwmp
-        set firewall.cwmp=include
-        set firewall.cwmp.path=/etc/firewall.cwmp
-        set firewall.cwmp.reload=1
-        commit firewall
-EOT
-
-exit 0
-

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -0,0 +1,54 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+set_cwmp_reqopts() {
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
+	local discovery=0
+	case $dhcp_discovery in
+		enable|1) discovery=1 ;;
+	esac
+
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
+	for ropt in $reqopts; do
+		case $ropt in
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
+		esac
+	done
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ "$proto" == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+	fi
+}
+
+regenerate_ssl_link(){
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+set_cwmp_reqopts
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +0,0 @@
-/var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp

icwmp/xmpp-files/etc/hotplug.d/iface/91-icwmp_xmpp

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+[ -f /etc/config/cwmp_xmpp ] || exit 0
+
+[ "$ACTION" == "ifup" ] || exit 0
+[ "$INTERFACE" == "loopback" ] && exit 0
+
+local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+local islan="$(uci -q get network.$INTERFACE.is_lan)"
+[ "$islan" == "1" ] && exit 0
+
+local proto="$(uci -q get network.$INTERFACE.proto)"
+[ "$proto" == "none" ] && exit 0
+
+local ifname="$(uci -q get network.$INTERFACE.ifname)"
+[ "${ifname:0:1}" == "@" ] && exit 0
+
+/etc/init.d/icwmp_xmppd reload &
+

ieee1905/Config.in

@@ -1,27 +1,29 @@
-if (PACKAGE_ieee1905)
+if PACKAGE_ieee1905 || PACKAGE_lib1905al
 
-menu "Configuration"
+menu "developer/debug options"
 
-config IEEE1905_EXTENSION_ALLOWED
-	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
-	default y
+	config IEEE1905_MAP_COMPLETE_NETWORK
+		bool "Create network topology for complete network"
+		default n
 
-config IEEE1905_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
+	config IEEE1905_SPEED_UP_DISCOVERY
+		bool "Speed up discovery of an AL in network"
+		default y
 
-config IEEE1905_CMDU_SA_IS_ALMAC
-	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
-	default n
+	config IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
+		bool "Do not accept M1/M2 messages from unknown AL(s)"
+		default y
 
-config IEEE1905_WIFI_EASYMESH
-	bool "Include WiFi-Alliance's Easymesh updates"
-	default y
+	choice
+		prompt "Select ALME support"
+		default IEEE1905_ALME_OVER_UBUS
 
-config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
-	default y
+		config IEEE1905_ALME_OVER_UBUS
+			bool "ALME methods supported over ubus"
 
+		config IEEE1905_ALME_OVER_TCP
+			bool "ALME server over TCP port"
+
+	endchoice
 endmenu
-
 endif

ieee1905/Makefile

@@ -1,140 +1,113 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2019 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.1.18.1
+PKG_VERSION:=2.0.18
 
-LOCAL_DEV=0
+LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=eecbdf46c506e640d8fa66ddb211f88f1de098f8
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
+PKG_SOURCE_VERSION:=44035a3bb0dd7e9fc1feb037c72c2c0d33692a98
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-
-define Package/ieee1905/Default
+define Package/ieee1905
   SECTION:=utils
   CATEGORY:=Utilities
-  SUBMENU:=IEEE-1905.1 stack
+  TITLE:=IEEE1905 daemon
+  DEPENDS:= +libuci +libjson-c +lib1905 +ubox +libpcap +libopenssl +libwifi +libeasy
 endef
 
 define Package/ieee1905/config
-  source "$(SOURCE)/Config.in"
+	source "$(SOURCE)/Config.in"
 endef
 
-define Package/libieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=libieee1905.so (library for CMDU and TLV handling)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json
-endef
-
-define Package/ieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ubus +libpthread \
-	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
-endef
-
-include $(wildcard plugins/*.mk)
-
 define Package/ieee1905/description
- This package provides IEEE Std 1905.1 stack.
+ IEEE1905 stack with extended functionalities.
 endef
 
-define Package/libieee1905/description
- This package provides library functions for IEEE Std 1905.1 stack.
+define Package/lib1905
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=IEEE1905 cmdu tlv utility library
 endef
 
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugin),map) \
-	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
-	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
-
-
-ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
-
+define Package/lib1905hle
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=IEEE1905 hle stack library
+endef
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-fstrict-aliasing \
+	-Wall \
+	-Wextra
 
-ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
+ifeq ($(CONFIG_IEEE1905_SPEED_UP_DISCOVERY),y)
+TARGET_CFLAGS += -DSPEED_UP_DISCOVERY
 endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
-TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
+ifeq ($(CONFIG_IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS),y)
+TARGET_CFLAGS += -DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
 endif
-
-ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
-TARGET_CFLAGS += -DWIFI_EASYMESH
+ifeq ($(CONFIG_IEEE1905_ALME_OVER_TCP),y)
+TARGET_CFLAGS += -DALME_OVER_TCP
 endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
-TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
+ifeq ($(CONFIG_IEEE1905_ALME_OVER_UBUS),y)
+TARGET_CFLAGS += -DALME_OVER_UBUS
+endif
+ifeq ($(CONFIG_IEEE1905_MAP_COMPLETE_NETWORK),y)
+TARGET_CFLAGS += -DIEEE1905_MAP_COMPLETE_NETWORK
 endif
-
-MAKE_FLAGS += \
-	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
-
-MAKE_PATH:=src
-
-
-define Package/ieee1905/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
-endef
-
-define Package/libieee1905/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libieee1905
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
-endef
-
-define Build/InstallDev
-	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
-endef
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
+	$(CP) -rf ~/git/ieee1905/* $(PKG_BUILD_DIR)/
 endef
 endif
 
+define Package/ieee1905/install
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/usr/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
+	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
+endef
+
+define Package/lib1905hle/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/lib1905hle.so $(1)/usr/lib/lib1905hle.so
+endef
+
+define Package/lib1905/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/lib1905.so $(1)/usr/lib/lib1905.so
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/lib1905
+	$(INSTALL_DIR) $(1)/usr/include/ieee1905
+	$(INSTALL_DIR) $(1)/usr/include/lib1905hle
+	$(CP) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/ieee1905/
+	$(CP) $(PKG_BUILD_DIR)/lib1905/include/*.h $(1)/usr/include/lib1905/
+	$(CP) $(PKG_BUILD_DIR)/lib1905hle/include/*.h $(1)/usr/include/lib1905hle/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/lib/lib1905.so $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,lib1905))
+$(eval $(call BuildPackage,lib1905hle))
 $(eval $(call BuildPackage,ieee1905))
-$(eval $(call BuildPackage,libieee1905))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))

ieee1905/files/etc/config/ieee1905

@@ -1,32 +1,20 @@
 config ieee1905 'ieee1905'
-	option enabled '1'
-	option extension '1'
-	list extmodule 'map'
-	option registrar '2 5 6'
-#	option macaddress '0a:1b:2c:3d:4e:50'
+        option enabled '1'
+        option debug  true
+        option debug_level  2
+        option macaddress 'auto'
+        option registrar 0
+        option cmdu_event 1
+        option map_plugin 0
+
+config security 'security'
+        list method 'PBC'
+	option ssid ''
+	option encryption ''
+        option key 'TESTPASSWORD'
 
 config al-iface
-	option enabled '1'
-	option ifname 'br-lan'
-	option type 'bridge'
-
-# ap sections are auto-generated/overwritten during onboarding
-#
-config ap
-	option band '2'
-	option ssid 'IOWRT-2.4GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-
-config ap
-	option band '5'
-	option ssid 'IOWRT-5GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+        option enabled 1
+        option ifname 'br-lan'
+        option media 'bridge'
 

ieee1905/files/etc/init.d/ieee1905

@@ -1,103 +1,64 @@
 #!/bin/sh /etc/rc.common
 
-START=96
-STOP=21
+START=99
+STOP=10
 
 USE_PROCD=1
+PROG=/usr/sbin/ieee1905d
 
-IS_CFG_VALID=1
-
-validate_ieee1905_section() {
-	uci_validate_section ieee1905 ieee1905 "ieee1905" \
-			'enabled:bool:true' \
-			'macaddress:or("auto",macaddr)' \
-			'registrar:string' \
-			'extension:bool:false' \
-			'extmodule:list(string)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
+validate_ieee1905_section()
+{
+	uci_validate_section ieee1905 ieee1905 "${1}" \
+		'debug:bool:false' \
+		'enabled:bool:false'
 }
 
-validate_ali_section() {
-	local section="$1"
+configure_ieee1905()
+{
+	local enabled debug
 
-	uci_validate_section ieee1905 $section "${1}" \
-			'ifname:string' \
-			'type:or("bridge",string)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
-		IS_CFG_VALID=0
-		return 1
+	validate_ieee1905_section ${1} || {
+		echo "Validation of ieee1905 section failed"
+		exit 1;
 	}
-	return 0
+
+	if [ ${debug} -eq 1 ]; then
+		# Forward stdout of the command to logd
+		procd_set_param stdout 1
+		# Same for stderr
+		procd_set_param stderr 1
+	fi
+
+	if [ ${enabled} -ne 1 ]; then
+		exit 0;
+	fi
 }
 
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
-			'ssid:string' \
-			'encryption:or("psk2", "sae-mixed", "sae",
-				"psk", "psk-mixed", "none", string)' \
-			'key:string' \
-			'uuid:string' \
-			'manufacturer:string' \
-			'model_name:string' \
-			'device_name:string' \
-			'model_number:string' \
-			'serial_number:string' \
-			'device_type:string' \
-			'os_version:uinteger'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ap section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ieee1905_config() {
-	IS_CFG_VALID=1
-
-	validate_ieee1905_section &&
-		config_foreach validate_ali_section "al-iface" &&
-		config_foreach validate_ap_section ap
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
-		return 1
-	}
-	return 0
+configure_network()
+{
+	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
+	if [ "$?" -ne 0 ]; then
+		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
+		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
+	fi
 }
 
 start_service() {
-	config_load "ieee1905"
-	validate_ieee1905_config || return 1;
-
-	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
+	procd_open_instance ieee1905
+	procd_set_param command ${PROG}
+	configure_ieee1905 "ieee1905"
+	configure_network
 	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param env IEEE1905_LOG_CMDU=1
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
 	procd_close_instance
 }
 
-service_triggers()
-{
-	procd_add_reload_trigger "ieee1905"
-}
-
 reload_service() {
 	stop
 	start
 }
+
+service_triggers() {
+	procd_add_reload_trigger "network"
+	procd_add_reload_trigger "wireless"
+	procd_add_reload_trigger "netmode"
+}

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

ieee1905/files/etc/uci-defaults/31-ifname-option-to-list

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-config_load ieee1905
-
-ifname_to_list() {
-	local section=$1
-
-	config_get ifname $section ifname	# get list or option as space separated values
-	ifname=${ifname//,/\ }			# convert csv with space separation
-	uci del ieee1905.${section}.ifname	# delete entry
-	for i in ${ifname}; do
-		uci add_list ieee1905.${section}.ifname="$i"	# writeback entry as list
-	done
-}
-
-config_foreach ifname_to_list al-iface

ieee1905/plugins/map.mk

@@ -1,51 +0,0 @@
-define Package/map-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/map-plugin/config
-	if (PACKAGE_map-plugin)
-
-		menu "Configuration"
-
-		config MULTIAP_EASYMESH_VERSION
-		int "Easymesh version"
-		default 2
-
-		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-		bool "Sync configuration between dynamic controllers in the network"
-		default n
-
-		config MULTIAP_FUZZ_1905_CMDUS
-		bool "Include support to fuzz 1905 CMDUs for testing purpose"
-		default n
-
-		endmenu
-	endif
-endef
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
-
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef

ieee1905/plugins/snoop.mk

@@ -1,12 +0,0 @@
-define Package/snoop-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Show all received 1905 CMDUs over UBUS
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/snoop-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
-endef

ieee1905/plugins/topology.mk

@@ -1,12 +0,0 @@
-define Package/topology-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Build full network topology of the 1905 nodes only
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/topology-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
-endef

imonitor/Makefile

@@ -5,16 +5,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=imonitor
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
+PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_INSTALL:=1
 PKG_BUILD_PARALLEL:=1

imonitor/files/etc/init.d/imonitor

@@ -18,7 +18,12 @@ start_service() {
 	procd_close_instance
 }
 
+stop() {
+	service_stop imonitor
+}
+
 reload_service() {
 	stop
 	start
 }
+

inbd/Makefile

@@ -9,14 +9,14 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_VERSION:=3135944f3357a7a2c1c206be7b65bbb7ac6d1e58
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 

iop/Config.in

@@ -1,7 +0,0 @@
-config TARGET_VERSION
-	string
-	prompt "Software Version"
-
-config TARGET_CUSTOMER
-	string
-	prompt "Customer ID"