Ticket refs #14120: TR-069: Add STUN support

ated/Makefile

@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2016 inteno
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/ated
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbfdm/Config_bbfdm.in

@@ -1,23 +0,0 @@
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_OBFUSCATION_KEY
-	string "Obfuscation key"
-	default "371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04"
-
-config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
-	default y
-
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbfdm/Makefile

@@ -1,159 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.7.28
-
-USE_LOCAL:=0
-ifneq ($(USE_LOCAL),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=fd894e7cb7bfaf695f6dccc996478589f162d38b
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-include bbfdm.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api \
-	    +BBF_TR471:obudpst +libopenssl
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +libbbfdm
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR143 data models
-endef
-
-ifeq ($(USE_LOCAL),1)
-define Build/Prepare
-	$(CP) ~/git/bbfdm/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-	-DBBF_WIFI_DATAELEMENTS=ON
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/scripts/bbf.secure $(1)/usr/libexec/rpcd/bbf.secure
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	echo "$(CONFIG_BBF_OBFUSCATION_KEY)" > $(1)/etc/bbfdm/.secure_hash
-	$(INSTALL_DIR) $(1)/etc/bbfdm/certificates
-endef
-
-define Package/libbbfdm/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/97-firewall-service
-	$(INSTALL_BIN) ./files/etc/uci-defaults/99-link-core-plugins $(1)/etc/uci-defaults/99-link-core-plugins
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-remove-nonexisting-microservices $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/91-fix-bbfdmd-enabled-option $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
-	$(INSTALL_BIN) ./files/etc/firewall.service $(1)/etc/firewall.service
-ifeq ($(findstring iopsys,$(CONFIG_BBF_VENDOR_LIST)),iopsys)
-	$(call BbfdmInstallPlugin,$(1),$(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/iopsys/libbbfdm_iopsys_ext.so)
-endif	
-ifeq ($(CONFIG_BBF_TR143),y)
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-endif
-endef
-
-define Package/libbbfdm/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/bbfdm/input.json $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-endef
-
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,bbfdmd))

bbfdm/README.md

@@ -1,114 +0,0 @@
-# BBFDM configuration options and utilities
-
-bbfdm provides few compile time configuration options and compile time help utility called [bbfdm.mk](./bbfdm.mk), this document aimed to explain the available usages and best practices.
-
-## Compilation options
-
-|  Configuration option    | Description   | Default Value |
-| -----------------------  | ------------- | ----------- |
-| CONFIG_BBF_VENDOR_LIST   | List of vendor extension directories | iopsys        |
-| CONFIG_BBF_VENDOR_PREFIX | Prefix for Vendor extension datamodel objects/parameters | X_IOPSYS_EU_  |
-| CONFIG_BBF_TR143         | Enable/Add TR-143 Data Model Support | y             |
-| CONFIG_BBF_TR471         | Enable/Add TR-471 Data Model Support | y             |
-| CONFIG_BBF_MAX_OBJECT_INSTANCES | Maximum number of instances per object | 255    |
-| BBF_OBFUSCATION_KEY      | Hash used to encode/decode in `bbf.secure` object | 371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04 |
-
-
-#### BBF_OBFUSCATION_KEY
-
-`bbfdm` provides an ubus object called `bbf.secure` to allow encoding/decoding the values, `bbf.secure` currently support following methods internally to encode/decode
-
-  - Encode/Decode using a predefined SHA512 Hash key
-  - Encode/Decode using a private/public RSA key pair
-
-The `BBF_OBFUSCATION_KEY` compile time configuration option used to defined the SHA512 HASH, if this option is undefined, then it usages a default value as mention in the above table.
-
-User must override this parameter with their own hash value, to generate a hash user can run below command and copy the hash value to this option.
-
-ex: User wants to use 'Sup3rS3cur3Passw0rd' as passkey, then can get the SHA512 sum with
-
-```bash
-$ echo -n "Sup3rS3cur3Passw0rd" | sha512sum
-371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04  -
-```
-
-> Note: Additionally, user can install RSA private key in '/etc/bbfdm/certificates/private_key.pem' path, if private key is present `bbf.secure` shall use rsa private certificate for encrypt/decrypt function. In case of key not present in the pre-defined path, hash will be used for the same.
-
-## Helper utility (bbfdm.mk)
-
-bbfdm provides a helper utility [bbfdm.mk](./bbfdm.mk) to install datamodel plugins in bbfdm core or in microservice directory.
-
-### Install datamodel DotSO/JSON plugin in bbfdm core
-
-Utility to install the DotSO/JSON plugin in bbfdm core plugin path
-
-```bash
-# inputs:
-#  $1 => package install directory
-#  $2 => Plugin artifact
-```
-
-Example:
-
-```make
-define Package/$(PKG_NAME)/install
-	$(call BbfdmInstallPlugin,$(1),./files/etc/bbfdm/json/CWMPManagementServer.json)
-endef
-```
-
-### Install datamodel DotSO/JSON plugin in bbfdm core with priority
-
-Its now possible to overwrite/remove core datamodel with plugin, so, if some datamodel objects/parameters are present in more than one plugin, order in which they loaded into memory becomes crucial, this Utility help to configure a priority order in which they gets loaded in memory.
-
-```bash
-# inputs:
-#  $1 => package install directory
-#  $2 => Priority of the installed plugin
-#  $3 => Plugin artifact
-```
-
-Example:
-```make
-define Package/$(PKG_NAME)/install
-	$(call BbfdmInstallPluginWithPriority,$(1),01,$(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json)
-endef
-```
-
-> Note: Last loaded plugin gets the highest priority
-
-### Install plugin into micro-service directory
-
-Utility to install the plugin in datamodel microservice directory, ex. user wants to run a datamodel micro-service, it required to install the DotSO/JSON plugin into a non bbf core directory, this utility helps in installing the DotSO/JSON plugin in mentioned directory.
-
-```bash
-# inputs:
-#  $1 => package install directory with micro-service directory
-#  $2 => Plugin artifact
-```
-
-Example:
-
-```make
-define Package/$(PKG_NAME)/install
-	$(call BbfdmInstallPluginInMicroservice,$(1)/etc/bulkdata,$(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json)
-endef
-```
-
-### Install datamodel micro-service input file
-
-Utility to install the datamodel plugin input file into the bbfdm micro-service directory, so that bbfdm auto start the datamodel micro-service before main bbfdm process.
-
-```bash
-# inputs:
-#  $1 => package install directory
-#  $2 => Microservice input.json path
-```
-
-Example:
-
-```make
-define Package/$(PKG_NAME)/install
-	$(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/bulkdata/input.json)
-endef
-```
-

bbfdm/bbfdm.mk

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-# Utility to install the plugin in bbfdm core path
-# inputs:
-#  $1 => package install directory
-#  $2 => Plugin artifact
-#
-# Example:
-#  $(call BbfdmInstallPlugin,$(1),./files/etc/bbfdm/json/CWMPManagementServer.json)
-#
-define BbfdmInstallPlugin
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/plugins/
-endef
-
-# Utility to install the plugin in bbfdm core path with priority
-# inputs:
-#  $1 => package install directory
-#  $2 => Priority of the installed plugin
-#  $3 => Plugin artifact
-#
-# Example:
-#   $(call BbfdmInstallPluginWithPriority,$(1),01,$(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json)
-#
-define BbfdmInstallPluginWithPriority
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(3) $(1)/etc/bbfdm/plugins/$(2)_$(shell basename ${3})
-endef
-
-# Utility to install the plugin in datamodel microservice directory
-# inputs:
-#  $1 => package install directory with micro-service directory
-#  $2 => Plugin artifact
-#
-# Example:
-#  $(call BbfdmInstallPluginInMicroservice,$(1)/etc/bulkdata,$(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json)
-#
-define BbfdmInstallPluginInMicroservice
-	$(INSTALL_DIR) $(1)
-	$(INSTALL_DATA) $(2) $(1)/
-endef
-
-# Utility to install the datamodel plugin input file
-# inputs:
-#  $1 => package install directory
-#  $2 => Microservice input.json path
-#
-# Example:
-#  $(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/bulkdata/input.json)
-#
-define BbfdmInstallMicroServiceInputFile
-	$(INSTALL_DIR) $(1)/etc/bbfdm/micro_services
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/micro_services/$(PKG_NAME).json
-endef
-

bbfdm/files/etc/bbfdm/input.json

@@ -1,28 +0,0 @@
-{
-        "daemon": {
-                "config": {
-                },
-                "input": {
-                        "type": "DotSo",
-                        "name": "/lib/libbbfdm.so",
-                        "plugin_dir": "/etc/bbfdm/plugins"
-                },
-                "output": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                }
-        },
-        "cli": {
-                "config": {
-                        "proto": "both",
-                        "instance_mode": 0
-                },
-                "input": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                },
-                "output": {
-                        "type": "CLI"
-                }
-        }
-}

bbfdm/files/etc/config/bbfdm

@@ -1,11 +0,0 @@
-config bbfdmd 'bbfdmd'
-	option enable '1'
-	option loglevel '1'
-	option refresh_time '120'
-	option transaction_timeout '30'
-	option subprocess_level '2'
-
-config micro_services 'micro_services'
-	option enable '1'
-	option enable_core '0'
-	option enable_respawn '1'

bbfdm/files/etc/firewall.portmap

@@ -1,74 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.dnat -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd | sed 's/-A /-D /g')"
-				exec_cmd $cmd1
-			done
-		fi
-
-		# Now add rules as per datamodel precedence shown below
-		## Non empty remote host, empty dport
-		## empty remote host, non empty dport
-		## empty remote host, empty dport
-		if [ -n "${EMPTY_PORT}" ]; then
-			echo "${EMPTY_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST}" ]; then
-			echo "${EMPTY_HOST}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-
-		if [ -n "${EMPTY_HOST_PORT}" ]; then
-			echo "${EMPTY_HOST_PORT}" | while read cmd; do
-				cmd1="iptables -t nat $(echo $cmd)"
-				exec_cmd $cmd1
-			done
-		fi
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

bbfdm/files/etc/firewall.service

@@ -1,163 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.service -p info
-}
-
-exec_cmd() {
-	if ! eval "$*"; then
-		log "Failed to run [$*]"
-		echo "-1"
-		return 0
-	fi
-
-	echo "0"
-	return 0
-}
-
-add_iptable_rule() {
-	chain_name=$1
-	protocol=$2
-	dest_port=$3
-	icmp_type=$4
-	family=$5
-	src_prefix=$6
-	action=$7
-	res=-1
-
-	cmd="-I ${chain_name}"
-
-	if [ -n "${protocol}" ]; then
-		cmd="${cmd} -p $protocol"
-
-		if [ "${protocol}" -eq 41 ] || [ "${protocol}" -eq 43 ] || [ "${protocol}" -eq 44 ] ||
-		   [ "${protocol}" -eq 58 ] || [ "${protocol}" -eq 59 ] || [ "${protocol}" -eq 60 ]; then
-		   	# Explicit v6 protocols
-			if [ "${family}" = "ipv4" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv6"
-			fi
-		elif [ "${protocol}" -eq 1 ]; then
-		   	# Explicit v4 protocols
-			if [ "${family}" = "ipv6" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv4"
-			fi
-		fi
-
-		# Limitation:: iptables do not accept dport without specific protocol
-		count=$(echo "${dest_port}" | sed -n "/-1/p" | wc -l)
-
-		if [ "${count}" -eq 0 ]; then
-			# dest_port not contains -1 so need to have this match criteria
-			count=$(echo "${dest_port}" | wc -w)
-			if [ "${count}" -gt 1 ]; then
-				# multiple ports present
-				port=$(echo "${dest_port}" | sed "s/ /,/g")
-				cmd="${cmd} -m multiport --dports ${port}"
-			else
-				cmd="${cmd} --dport ${dest_port}"
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv4" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 1 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmp-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "iptables ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-		else
-			#Add ipv4 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 0 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "iptables -s $src_list ${cmd} -m comment --comment IPtables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv6" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 58 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmpv6-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd "ip6tables ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-		else
-			#Add ipv6 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 1 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd "ip6tables -s $src_list ${cmd} -m comment --comment IP6tables_service_rule -j ${action}")
-			fi
-		fi
-	fi
-
-	echo $res
-}
-
-add_service() {
-	local enable proto family dest_port interface target icmp_type
-
-	config_get enable "$1" enable "0"
-	config_get icmp_type "$1" icmp_type "-1"
-	config_get target "$1" target "Accept"
-	config_get interface "$1" interface ""
-	config_get family "$1" family "-1"
-	config_get dest_port "$1" dest_port "-1"
-	config_get proto "$1" proto "-1"
-	config_get src_prefix "$1" src_prefix ""
-
-	if [ "${enable}" -eq 0 ] || [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	action=$(echo "${target}" | tr a-z A-Z)
-	chain_name="zone_${interface}_input"
-	res=0
-
-	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
-
-	if [ "${count}" -eq 0 ]; then
-		# proto not contains -1 so need to have this match criteria
-		for protocol in $proto; do
-			res=$(add_iptable_rule "$chain_name" "$protocol" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-		done
-	else
-		# proto contains -1 so no need to have this match criteria
-		res=$(add_iptable_rule "$chain_name" "" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-	fi
-
-	if [ "${res}" -ne 0 ]; then
-		uci -q set firewall."${1}".status="Error"
-	else
-		uci -q set firewall."${1}".status=""
-	fi
-
-	uci commit firewall
-}
-
-config_load firewall
-config_foreach add_service "service"

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -1,164 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-BBFDM_MICROSERVICE_DIR="/etc/bbfdm/micro_services"
-BBFDM_TEMP_DIR="/tmp/bbfdm"
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enable:bool:true' \
-		'sock:string' \
-		'debug:bool:false' \
-		'loglevel:uinteger:1' \
-		'refresh_time:uinteger:0' \
-		'transaction_timeout:uinteger:30' \
-		'subprocess_level:uinteger'
-}
-
-validate_bbfdm_micro_service_section()
-{
-	uci_validate_section bbfdm micro_services "micro_services" \
-		'enable:bool:true' \
-		'enable_core:bool:false' \
-		'enable_respawn:bool:true'
-}
-
-bbfdm_add_micro_service()
-{
-	local name path cmd
-	local enable enable_core enable_respawn
-
-	validate_bbfdm_micro_service_section || {
-		log "Validation of micro_service section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq "0" ] && return 0
-
-	path="${1}"
-	name="$(basename ${path})"
-	name="${name//.json}"
-
-	json_init
-	json_add_string name "bbfdm.services"
-	json_add_object "instances"
-		json_add_object "${name}"
-			json_add_array "command"
-				json_add_string "" "${PROG}"
-				json_add_string "" "-m"
-				json_add_string "" "${path}"
-			json_close_array
-
-			if [ "${enable_core}" -eq "1" ]; then
-				json_add_object "limits"
-					json_add_string "core" "unlimited"
-				json_close_object
-				json_add_boolean "stdout" 1
-				json_add_boolean "stderr" 1
-			fi
-
-			if [ "${enable_respawn}" -eq "1" ]; then
-				json_add_array "respawn"
-					json_add_string "" "3600"
-					json_add_string "" "5"
-					json_add_string "" "5"
-				json_close_array
-			fi
-		json_close_object
-	json_close_object
-
-	cmd="$(json_dump)"
-	ubus call service add "${cmd}"
-}
-
-_add_microservice()
-{
-	local enable loglevel input_json name
-
-	name="${1}"
-	input_json="$(jq -r '.daemon.input.name' ${name})"
-
-	if [ -f "${input_json}" ]; then
-		bbfdm_add_micro_service "${name}"
-	else
-		log "Input json [${input_json}] does not defined/present"
-	fi
-
-}
-
-configure_bbfdm_micro_services()
-{
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		FILES="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/*.json)"
-
-		for service in $FILES;
-		do
-			[ -e "$service" ] || continue
-			_add_microservice $service
-		done
-	fi
-	ubus call service state '{"name":"bbfdm.services", "spawn":true}'
-}
-
-configure_bbfdmd()
-{
-	local enable debug sock
-	local jlog jrefresh jtimeout jlevel
-
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq 0 ] && return 0
-
-	if [ -f "${BBFDM_JSON_INPUT}" ]; then
-		echo "$(jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} --arg level ${subprocess_level} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran, "subprocess_level": $level}' ${BBFDM_JSON_INPUT})" > "${BBFDM_TEMP_DIR}/input.json"
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	mkdir -p ${BBFDM_TEMP_DIR}
-
-	configure_bbfdm_micro_services
-
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-}
-
-stop_service()
-{
-	ubus call service delete '{"name":"bbfdm.services"}'
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/uci-defaults/90-remove-nonexisting-microservices

@@ -1,18 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-remove_nonexisting_microservice() {
-	local input_json
-
-	config_get input_json "$1" input_json ""
-
-	if [ -z "${input_json}" ]; then
-		uci_remove bbfdm "${1}"
-	fi
-}
-
-config_load bbfdm
-config_foreach remove_nonexisting_microservice "micro_service"
-
-exit 0
-

bbfdm/files/etc/uci-defaults/91-fix-bbfdmd-enabled-option

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# rename bbfdmd enabled option to enable
-val="$(uci -q get bbfdm.bbfdmd.enabled)"
-if [ -n "${val}" ]; then
-	uci -q set bbfdm.bbfdmd.enabled=""
-	uci -q set bbfdm.bbfdmd.enable="${val}"
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-
-	# Apply the changes
-	uci commit network
-	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/etc/uci-defaults/97-firewall-service

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.service_hook
-        set firewall.service_hook=include
-        set firewall.service_hook.path=/etc/firewall.service
-        set firewall.service_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/99-link-core-plugins

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-UNIFIED_PATH="/etc/bbfdm/plugins/"
-
-# Link JSON plugins
-for f in `ls -1 /etc/bbfdm/json/*.json`; do
-	echo "# BBFDM JSON plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-# Link DotSo plugins
-for f in `ls -1 /usr/lib/bbfdm/*.so`; do
-	echo "# BBFDM DotSO plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-exit 0
-

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

bulkdata/Makefile

@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2022 iopsys Software Solutions AB
-#
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.9
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=e472e90feec31d9f318ea8c732ab564002e25db1
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/bulkdata
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/config/bulkdata $(1)/etc/config/
-	$(INSTALL_BIN) ./files/etc/init.d/bulkdatad $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/uci-defaults/95-bulkdata-translation-options $(1)/etc/uci-defaults/
-	$(call BbfdmInstallPluginInMicroservice,$(1)/etc/bulkdata,$(PKG_BUILD_DIR)/bbf_plugin/bulkdata.json)
-	$(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/bulkdata/input.json)
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/bulkdata/input.json

@@ -1,17 +0,0 @@
-{
-	"daemon": {
-		"config": {
-			"loglevel": "1"
-		},
-		"input": {
-			"type": "JSON",
-			"name": "/etc/bulkdata/bulkdata.json"
-		},
-		"output": {
-			"type": "UBUS",
-			"parent_dm": "Device.",
-			"object": "BulkData",
-			"root_obj": "bbfdm"
-		}
-	}
-}

bulkdata/files/etc/config/bulkdata

@@ -1,6 +0,0 @@
-
-config bulkdata 'bulkdata'
-	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
-	option log_level '3'
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,31 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=60
-STOP=10
-
-USE_PROCD=1
-PROG="/usr/sbin/bulkdatad"
-
-start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	[ "$enable" -eq "1" ] && {
-		procd_open_instance "bulkdata"
-		procd_set_param command "$PROG"
-		procd_set_param respawn
-		procd_close_instance "bulkdata"
-	}
-}
-
-reload_service() {
-	stop
-	start 
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger bulkdata
-}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

capiagent/Makefile

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=capiagent
-PKG_VERSION:=2.1.1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=136cab3a9f1eec0132db9fa3f7bb1c8748ce1449
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/capiagent.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-#define Package/capiagent/config
-#  source "$(SOURCE)/Config.in"
-#endef
-
-define Package/capiagent
-  TITLE+= capiagent (daemon implementing Wi-Fi Alliance's CAPI commands)
-  DEPENDS= +libubox +libuci +libubus +libnl-genl +libeasy +libwifi \
-	   +libjson-c +libblobmsg-json +ubus +libieee1905 +libwifiutils
-endef
-
-define Package/capiagent/description
- This package provides agent for the WiFi Alliance's CAPI specification.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-MAKE_PATH:=src
-
-
-define Package/capiagent/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi/capi
-	$(CP) $(PKG_BUILD_DIR)/src/capiagent $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/scripts/* $(1)/lib/wifi/capi
-endef
-
-$(eval $(call BuildPackage,capiagent))

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serialNumber)
+	hw=$(db get hw.board.hardware)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,61 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serialNumber)
+hw=$(db get hw.board.hardware)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

csmngr/Makefile

@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=csmngr
-PKG_VERSION:=0.0.8
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ca899eb18b5bec38f4b8b4d08b42d89fef965c13
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/csmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_CONFIG_DEPENDS := \
-		     CONFIG_PACKAGE_libwifiutils \
-		     CONFIG_PACKAGE_libwifi
-
-PKG_BUILD_DEPENDS := libwifi
-
-include $(INCLUDE_DIR)/package.mk
-
-
-MAKE_PATH:=src
-
-define Package/csmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi channel selection manager
-  DEPENDS:=+libwifiutils +libwifi +libuci +libubox +ubus +libnl-genl
-endef
-
-define Package/csmngr/description
- WiFi Auto Channel Selection manager.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/csmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/csmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/csmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,csmngr))

csmngr/files/etc/init.d/csmngr

@@ -1,21 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=95
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/csmngr
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-#	procd_set_param stderr 1                    #for debugging only
-#	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-        stop
-        start
-}
-

ddnsmngr/Config.in

@@ -1,16 +0,0 @@
-if PACKAGE_ddnsmngr
-choice
-	prompt "Select backend for dynamic DNS management"
-	default DDNSMNGR_BACKEND_DDNSSCRIPT
-	depends on PACKAGE_ddnsmngr
-	help
-		Select which package to use for dynamic DNS support
-
-config DDNSMNGR_BACKEND_DDNSSCRIPT
-	bool "Use ddns_script"
-
-config DDNSMNGR_BACKEND_INADYN
-	bool "Use inadyn"
-
-endchoice
-endif

ddnsmngr/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.3
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=d0d37df44644ef2c1a0b11d3a4f92dc694ae1010
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-PKG_CONFIG_DEPENDS:=CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT CONFIG_DDNSMNGR_BACKEND_INADYN
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Dynamic DNS manager
-  DEPENDS:=+libbbfdm-api +DDNSMNGR_BACKEND_DDNSSCRIPT:ddns-scripts +DDNSMNGR_BACKEND_INADYN:inadyn
-  MENU:=1
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-define Package/$(PKG_NAME)/description
-	Manage dynamic DNS updation and provides Device.DynamicDNS. datamodel object based on TR181-2.16
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/ddnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/ddns
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/servers
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ddnsmngr
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(call BbfdmInstallPluginInMicroservice,$(1)/etc/ddnsmngr,$(PKG_BUILD_DIR)/src/libddnsmngr.so)
-	$(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/ddnsmngr/input.json)
-	$(INSTALL_DATA) ./files/etc/config/ddnsmngr $(1)/etc/config/ddnsmngr
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-ddns-config-migrate $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/init.d/ddnsmngr $(1)/etc/init.d/ddnsmngr
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT),y)
-	$(INSTALL_BIN) ./files/usr/lib/ddns_script/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/lib/ddnsmngr/ddnsmngr_updater.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/ddns-script/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_INADYN),y)
-	$(INSTALL_BIN) ./files/usr/lib/inadyn/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/inadyn/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/inadyn/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-endef
-
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

ddnsmngr/files/etc/config/ddnsmngr

@@ -1,23 +0,0 @@
-config ddnsmngr 'global'
-	option configfile '/var/run/ddnsmngr/ddnsmngr.json'
-	option ddns_dateformat '%F %R'
-	option ddns_rundir '/var/run/ddnsmngr'
-	option ddns_logdir '/var/log/ddnsmngr'
-	option ddns_loglines '250'
-	option upd_privateip '0'
-	option use_curl '1'
-
-config server 'ddns_server_1'
-	option enabled '1'
-	option service 'dynu.com'
-	option name 'dynu.com'
-
-config server 'ddns_server_2'
-	option enabled '1'
-	option service 'dyndns.org'
-	option name 'dyndns.org'
-
-config server 'ddns_server_3'
-	option enabled '1'
-	option service 'zoneedit.com'
-	option name 'zoneedit.com'

ddnsmngr/files/etc/ddnsmngr/input.json

@@ -1,17 +0,0 @@
-{
-	"daemon": {
-		"config": {
-			"loglevel": "1"
-		},
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/ddnsmngr/libddnsmngr.so"
-		},
-		"output": {
-			"type": "UBUS",
-			"parent_dm": "Device.",
-			"object": "DynamicDNS",
-			"root_obj": "bbfdm"
-		}
-	}
-}

ddnsmngr/files/etc/init.d/ddnsmngr

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=10
-USE_PROCD=1
-
-. /usr/lib/ddnsmngr/ddnsmngr_service.sh
-
-start_service() {
-	start_ddnsmngr_service
-}
-
-stop_service() {
-	stop_ddnsmngr_service
-}
-
-reload_service() {
-	stop
-	sleep 1
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger ddnsmngr
-	add_ddnsmngr_triggers
-}

ddnsmngr/files/etc/uci-defaults/01-ddns-config-migrate

@@ -1,170 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-cl_id=1
-srv_id=1
-
-function get_ddns_config_option() {
-	local val
-
-	val="$(uci -q get ddns.${1}.${2})"
-
-	if [ -z "${val}" ] && [ -n "${3}" ]; then
-		val="${3}"
-	fi
-
-	echo "${val}"
-}
-
-function config_supported_service() {
-	if ! uci -q get ddnsmngr.global >/dev/null 2>&1; then
-		uci -q set ddnsmngr.global="ddnsmngr"
-	fi
-
-	servers=""
-
-	for i in $(find /etc/ddnsmngr/servers/ -name '*.json' | cut -d'/' -f 5 | sed "s/.json//")
-	do
-		if [ -z "${servers}" ]; then
-			servers="${i}"
-		else
-			servers="${servers},${i}"
-		fi
-	done
-
-	uci -q set ddnsmngr.global.supported_services="${servers}"
-}
-
-function migrate_service_section() {
-	client_sec=""
-	enabled="$(get_ddns_config_option ${1} enabled "0")"
-	service_name="$(get_ddns_config_option ${1} service_name)"
-	interface="$(get_ddns_config_option ${1} interface)"
-	ip_network="$(get_ddns_config_option ${1} ip_network)"
-	username="$(get_ddns_config_option ${1} username)"
-	password="$(get_ddns_config_option ${1} password)"
-	lookup_host="$(get_ddns_config_option ${1} lookup_host)"
-	use_ipv6="$(get_ddns_config_option ${1} use_ipv6 "0")"
-	force_ipversion="$(get_ddns_config_option ${1} force_ipversion "0")"
-	use_https="$(get_ddns_config_option ${1} use_https "0")"
-	force_dnstcp="$(get_ddns_config_option ${1} force_dnstcp "0")"
-
-	if [ -z "${service_name}" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# check server file is present in device
-	if [ ! -f "/etc/ddnsmngr/servers/${service_name}.json" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# Check if client section is already added for this service
-	clients=$(uci -q show ddnsmngr | grep "=client")
-	client_count=$(echo "${clients}" | wc -l)
-
-	tmp=0
-	while [ $tmp -lt $client_count ]
-	do
-		mngr_serv="$(uci -q get ddnsmngr.@client[$tmp].service_name)"
-		mngr_intf="$(uci -q get ddnsmngr.@client[$tmp].interface)"
-		mngr_netw="$(uci -q get ddnsmngr.@client[$tmp].ip_network)"
-		mngr_user="$(uci -q get ddnsmngr.@client[$tmp].username)"
-		mngr_ipv6="$(uci -q get ddnsmngr.@client[$tmp].use_ipv6)"
-		mngr_forceip="$(uci -q get ddnsmngr.@client[$tmp].force_ipversion)"
-		mngr_https="$(uci -q get ddnsmngr.@client[$tmp].use_https)"
-		mngr_dnstcp="$(uci -q get ddnsmngr.@client[$tmp].force_dnstcp)"
-
-		[ -z "${mngr_ipv6}" ] && mngr_ipv6="0"
-		[ -z "${mngr_forceip}" ] && mngr_forceip="0"
-		[ -z "${mngr_https}" ] && mngr_https="0"
-		[ -z "${mngr_dnstcp}" ] && mngr_dnstcp="0"
-
-		if [ "${mngr_serv}" == "${service_name}" ] && [ "${mngr_intf}" == "${interface}" ] && \
-		   [ "${mngr_netw}" == "${ip_network}" ] && [ "${mngr_user}" == "${username}" ] && \
-		   [ "${mngr_ipv6}" == "${use_ipv6}" ] && [ "${mngr_forceip}" == "${force_ipversion}" ] && \
-		   [ "${mngr_https}" == "${use_https}" ] && [ "${mngr_dnstcp}" == "${force_dnstcp}" ]; then
-			break
-		fi
-
-		tmp=$(( tmp + 1 ))
-	done
-
-	if [ $tmp -ne $client_count ]; then
-		i=0
-		for client in $clients; do
-			if [ $i -eq $tmp ]; then
-				client_sec="$(echo $client | cut -d'=' -f 1 | cut -d'.' -f 2)"
-				break
-			fi
-			i=$(( i + 1 ))
-		done
-
-		if [ $enabled -eq 1 ]; then
-			uci -q set ddnsmngr."${client_sec}".enabled="1"
-		fi
-	else
-		client_sec=ddns_mig_client_"${cl_id}"
-
-		uci -q set ddnsmngr."${client_sec}"="client"
-		uci -q set ddnsmngr."${client_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${client_sec}".service_name="${service_name}"
-		uci -q set ddnsmngr."${client_sec}".interface="${interface}"
-		uci -q set ddnsmngr."${client_sec}".ip_network="${ip_network}"
-		uci -q set ddnsmngr."${client_sec}".username="${username}"
-		uci -q set ddnsmngr."${client_sec}".password="${password}"
-		uci -q set ddnsmngr."${client_sec}".use_ipv6="${use_ipv6}"
-		uci -q set ddnsmngr."${client_sec}".force_ipversion="${force_ipversion}"
-		uci -q set ddnsmngr."${client_sec}".use_https="${use_https}"
-		uci -q set ddnsmngr."${client_sec}".force_dnstcp="${force_dnstcp}"
-
-		cl_id=$(( cl_id + 1 ))
-
-		# add server section if not added
-		servers=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'")
-		if [ -z "${servers}" ]; then
-			server_sec=ddns_mig_server_"${srv_id}"
-			uci -q set ddnsmngr."${server_sec}"="server"
-			uci -q set ddnsmngr."${server_sec}".enabled="1"
-			uci -q set ddnsmngr."${server_sec}".service="${service_name}"
-			uci -q set ddnsmngr."${server_sec}".name="${service_name}"
-
-			srv_id=$(( srv_id + 1 ))
-		fi
-	fi
-
-
-	# if lookup_host is set then add host section
-	if [ -n "${lookup_host}" ] && [ -n "${client_sec}" ]; then
-		# check number of hosts present for this client
-		host_count=$(uci -q show ddnsmngr | grep "dm_parent=\'${client_sec}\'" | wc -l)
-		host_ix=$(( host_count + 1 ))
-		host_sec="${client_sec}"_host_"${host_ix}"
-
-		uci -q set ddnsmngr."${host_sec}"="host"
-		uci -q set ddnsmngr."${host_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${host_sec}".lookup_host="${lookup_host}"
-		uci -q set ddnsmngr."${host_sec}".dm_parent="${client_sec}"
-	fi
-
-	uci -q delete ddns."${1}"
-}
-
-function migrate_ddns_config() {
-	if [ ! -f "/etc/config/ddnsmngr" ]; then
-		# Create ddnsmngr config file
-		touch /etc/config/ddnsmngr
-	fi
-
-	config_supported_service
-
-	config_load ddns
-	config_foreach migrate_service_section service
-
-	uci -q commit ddns
-	uci -q commit ddnsmngr
-}
-
-migrate_ddns_config

ddnsmngr/files/usr/lib/ddns_script/ddnsmngr_service.sh

@@ -1,169 +0,0 @@
-#! /bin/sh
-
-RUNDIR="/var/run/ddnsmngr"
-LOGDIR="/var/log/ddnsmngr"
-PROG="/usr/lib/ddnsmngr/ddnsmngr_updater.sh"
-CONFIGFILE="/var/run/ddnsmngr/ddnsmngr.json"
-CLIENT_INTFS=""
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion proc_info_file
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return 0
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return 0
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return 0 
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return 0
-	fi
-
-	service_section=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return 0
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	json_add_object
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "proc_info_file" "${1}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_close_object
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return 0
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	run_dir=$(uci -q get ddnsmngr.global.ddns_rundir)
-	log_dir=$(uci -q get ddnsmngr.global.ddns_logdir)
-
-	if [ -n "${run_dir}" ]; then
-		RUNDIR="${run_dir}"
-	fi
-
-	if [ -n "${log_dir}" ]; then
-		LOGDIR="${log_dir}"
-	fi
-
-	mkdir -p "${RUNDIR}"
-	mkdir -p "${LOGDIR}"
-
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	touch "${CONFIGFILE}"
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "Can not create ${CONFIGFILE}, exit"
-		exit 0
-	fi
-
-	json_init
-	json_add_array "services"
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	json_close_array
-	json_dump > "${CONFIGFILE}"
-
-	procd_open_instance ddnsmngr
-	procd_set_param command "$PROG"
-	procd_append_param command -c "${CONFIGFILE}"
-	procd_append_param command -- start
-	procd_close_instance
-}
-
-stop_ddnsmngr_service() {
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "${CONFIGFILE} not found, can't stop services if running any"
-	fi
-
-	"$PROG" -c "${CONFIGFILE}" -- stop
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-		procd_add_interface_trigger "interface.*.down" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

ddnsmngr/files/usr/lib/inadyn/ddnsmngr_service.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-PROG="/usr/sbin/inadyn"
-CONFIGPATH="/tmp/inadyn_config"
-PIDPATH="/etc/inadyn_pid"
-CLIENT_INTFS=""
-CONFIG_FILES=""
-SERVER_PATH="/etc/ddnsmngr/servers"
-
-FORMAT="custom [SECTION] {\n\tusername\t= [USER]\n\tpassword\t= [PWD]\n\tddns-server\t= [SERV]\n\tddns-path\t= [URI]\n\tssl\t\t= [SSL]\n\thostname\t= [NAME]\n\tcheckip-command\t= [CMD]\n\tddns-response\t= [RESPONSES]\n}"
-
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-get_service_data() {
-	local provider="$1"
-	shift
-	local dir="$1"
-	shift
-	local ipv6="$1"
-	shift
-
-	local name data url answer script
-
-	[ $# -ne 2 ] && {
-		return 1
-	}
-
-	[ -f "${dir}/${provider}.json" ] || {
-		eval "$1=\"\""
-		eval "$2=\"\""
-		return 1
-	}
-
-	json_load_file "${dir}/${provider}.json"
-	json_get_var name "name"
-	if [ "$ipv6" -eq "1" ]; then
-		json_select "ipv6"
-	else
-		json_select "ipv4"
-	fi
-	json_get_var data "url"
-	json_get_var answer "answer"
-	json_select ".."
-	json_cleanup
-
-	response=""
-	if [ -n "${answer}" ]; then
-		answer=$(echo "${answer}" | sed 's/|/ /g')
-		for ans in $answer; do
-			if [ -z "${response}" ]; then
-				response="${ans}"
-			else
-				response="${response}, ${ans}"
-			fi
-		done
-		response="{ ${response} }"
-	fi
-
-	eval "$1=\"$data\""
-	eval "$2=\"$response\""
-
-	return 0
-}
-
-generate_inadyn_config() {
-	json_load "${1}"
-	json_get_var service_name service_name
-	json_get_var use_ipv6 use_ipv6
-	json_get_var interface interface
-	json_get_var username username
-	json_get_var password password
-	json_get_var host lookup_host
-	json_get_var conf_file config_file
-	json_get_var conf_dir config_dir
-	json_get_var server_address server_address
-	json_cleanup
-
-	if [ -z "${service_name}" ] || [ -z "${host}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_file}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_dir}" ]; then
-		return 1
-	fi
-
-	# First look into custom path to load the url otherwise default path
-	get_service_data "${service_name}" "${SERVER_PATH}" "${use_ipv6}" server_url server_answer
-
-	if [ -z "${server_url}" ]; then
-		return 1
-	fi
-
-	# Need to pick proto, server address and request uri separately from the url
-	# format http://[server_address]/[update_Request_uri]
-	proto=$(echo $server_url | cut -d':' -f 1)
-	serv=$(echo $server_url | cut -d'/' -f 3 | cut -d'@' -f 2)
-	uri=${server_url#*$serv}
-
-	if [ -z $proto ] || [ -z $serv ] || [ -z $uri ]; then
-		return 1
-	fi
-
-	path=$(echo "$uri" | sed 's/&/\\&/g')
-	update_uri=$(echo $path | sed -e "s#\[DOMAIN\]#%h#g"	-e "s#\[PASSWORD\]#%p#g" \
-				      -e "s#\[USERNAME\]#%u#g"	-e "s#\[IP\]#%i#g")
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	# now get the physical interface name
-	intf=$(ifstatus "${interface}" | jsonfilter -e '@.device')
-	if [ -z "${intf}" ]; then
-		return 1
-	fi
-
-	# command to get ip of the interface
-	if [ "${use_ipv6}" -eq 0 ]; then
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv4-address\\\\\"][0].address'\""
-	else
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv6-address\\\\\"][0].address'\""
-	fi
-
-	if [ "${proto}" = "http" ]; then
-		ssl="false"
-	else
-		ssl="true"
-	fi
-
-	inadyn_ver=$(inadyn -v)
-	user_agent="inadyn/${inadyn_ver}"
-
-	config_file="${conf_dir}/${conf_file}"
-	touch "${config_file}"
-
-	echo "iface = ${intf}" > "${config_file}"
-	echo "period = 600" >> "${config_file}"
-	echo "user-agent = ${user_agent}" >> "${config_file}"
-
-	if [ "${use_ipv6}" -eq 1 ]; then
-		echo "allow-ipv6 = true" >> "${config_file}"
-	fi
-
-	if [ -z "${password}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tpassword\\t= \[PWD\]\\n//g')
-	fi
-
-	if [ -z "${server_answer}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tddns-response\\t= \[RESPONSES\]\\n//g')
-	fi
-
-	config=$(echo $FORMAT | sed -e "s#\[SECTION\]#$conf_file#g"	-e "s#\[PWD\]#$password#g" \
-				    -e "s#\[USER\]#$username#g"	-e "s#\[SERV\]#$serv#g" \
-				    -e "s#\[URI\]#\"$update_uri\"#g"	-e "s#\[SSL\]#$ssl#g" \
-				    -e "s#\[NAME\]#$host#g"	-e "s#\[CMD\]#$get_ip#g" \
-				    -e "s#\[RESPONSES\]#$server_answer#g")
-
-	echo -e "\n\n${config}" >> "${config_file}"
-
-	return 0
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return
-	fi
-
-	service_section=$(uci show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return
-	fi
-
-	json_init
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_add_string "config_file" "${1}"
-	json_add_string "config_dir" "${CONFIGPATH}"
-
-	json_str=$(json_dump)
-	json_cleanup
-
-	generate_inadyn_config "${json_str}"
-
-	if [ "$?" -ne 0 ]; then
-		return
-	fi
-
-	CONFIG_FILES="${CONFIG_FILES} ${1}"
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	mkdir $CONFIGPATH
-	mkdir -p $PIDPATH
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	i=1
-	for conf in $CONFIG_FILES; do
-		instance="ddnsmngr_${i}"
-		i=$(( i + 1 ))
-
-		procd_open_instance $instance
-		procd_set_param command "$PROG"
-		procd_append_param command -f "${CONFIGPATH}/${conf}"
-		procd_append_param command -l debug
-		procd_append_param command -P "${PIDPATH}/${conf}"
-		procd_append_param command -n -C
-		procd_close_instance
-	done
-}
-
-stop_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 4
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=4.4.0.1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a42af441d0efc315714305d6b944e6b09a29b64d
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +ieee1905-map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

decollector/files/deagent.init

@@ -1,30 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/deagent
-
-service_running() {
-	ubus -t 2 wait_for wifi ieee1905 ieee1905.map
-}
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "$PROG" "-d" "-t 10"
-	#procd_set_param stdout 1
-	#procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger wireless
-}

decollector/files/decollector.init

@@ -1,43 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=11
-
-USE_PROCD=1
-PROG=/usr/sbin/decollector
-
-service_running() {
-	ubus -t 2 wait_for ieee1905 ieee1905.map
-}
-
-start_service() {
-	sleep 3
-	[ -e "/etc/config/mapcontroller" ] && {
-		local en
-
-		config_load mapcontroller
-		config_get en controller enabled "0"
-		config_get collect_int controller de_collect_interval
-
-		[ -n "$collect_int" -a $collect_int -lt 30 ] &&  collect_int=""
-
-		[ $en -gt 0 ] && {
-			procd_open_instance
-			procd_set_param command "$PROG" "-d" "${collect_int:+-t $collect_int}"
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_set_param respawn
-			procd_close_instance
-		}
-	}
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger mapcontroller
-}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,68 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dectmngr
-PKG_RELEASE:=3
-PKG_VERSION:=3.6.5
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=192e74db2082e3f89f6defe9d752d752b0b09079
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
- 	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
-endef
-
-define Package/$(PKG_NAME)/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +0,0 @@
-config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -1,137 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
-
-DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
-
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
-		sleep 1
-	done
-}
-
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-	local rxtun=
-
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
-
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
-
-	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
-
-	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	file)
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
-		rm -f $LOG_PATH/*
-		;;
-	esac
-
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	has_dect || return 0
-
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	ubus call dect reload
-}
-
-service_triggers() {
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
-}
-
-boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dectmngr2/Makefile

@@ -0,0 +1,53 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.2.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=dafaf749e89d1efaa7eb02709a3c0ef3e813c052
+PKG_NAME:=dectmngr2
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dnsmngr/Makefile

@@ -1,50 +0,0 @@
-#
-# Copyright (C) 2022-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.3
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=347070e096b98946ba660791e3c78d1646adc54a
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dnsmngr
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +dnsmasq +umdns
-  TITLE:=Package to add Device.DNS. datamodel support
-endef
-
-define Package/dnsmngr/description
-  Package to add Device.DNS. datamodel support.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/dnsmngr/install
-	$(INSTALL_DIR) $(1)/etc/dnsmngr
-	$(CP) $(PKG_BUILD_DIR)/src/libdnsmngr.so $(1)/etc/dnsmngr
-	$(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/dnsmngr/input.json)
-endef
-
-$(eval $(call BuildPackage,dnsmngr))

dnsmngr/files/etc/dnsmngr/input.json

@@ -1,17 +0,0 @@
-{
-	"daemon": {
-		"config": {
-			"loglevel": "1"
-		},
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/dnsmngr/libdnsmngr.so"
-		},
-		"output": {
-			"type": "UBUS",
-			"parent_dm": "Device.",
-			"object": "DNS",
-			"root_obj": "bbfdm"
-		}
-	}
-}

dslmngr/Makefile

@@ -1,83 +0,0 @@
-#
-# Copyright (C) 2018-2024 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.3
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6009d4cdabc2fb6827a1dd6096a96e720e97750b
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-  TARGET_PLATFORM=BROADCOM
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy +libbbfdm-api
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/xdsl \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ./dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/etc/dsl
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdsl.so $(1)/etc/dsl/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/bbfdm/micro_services/dsl.json

@@ -1,17 +0,0 @@
-{
-	"daemon": {
-		"config": {
-			"loglevel": "1"
-		},
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/dsl/libbbfdsl.so"
-		},
-		"output": {
-			"type": "UBUS",
-			"parent_dm": "Device.",
-			"root_obj": "bbfdm",
-			"multiple_objects": ["DSL","PTM","ATM","FAST"]
-		}
-	}
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,8 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-        commit firewall
-EOT

easy-soc-events/Makefile

@@ -1,110 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=easy-soc-events
-PKG_VERSION:=1.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
-PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-include $(INCLUDE_DIR)/package.mk
-
--include $(TOPDIR)/.config
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
-  LINUX_VERSION := 4.1.52
-  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
-  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
-  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
-  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
-  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
-endif
-
-
-define KernelPackage/easy-soc-events/default
-  SUBMENU:=Other modules
-endef
-
-define KernelPackage/easy-soc-events
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Helper module for netlink event notification
-  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
-  AUTOLOAD:=$(call AutoLoad,11,easyevent)
-endef
-
-define KernelPackage/easy-soc-events-test
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Test module for event notification through easyevent
-  DEPENDS+=+kmod-easy-soc-events
-  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
-endef
-
-
-define KernelPackage/easy-soc-events/description
-  This is a helper module to generate and pass netlink events from
-  kernel to user applications.
-endef
-
-#NOSTDINC_FLAGS :=
-
-ifdef CONFIG_PACKAGE_kmod-easy-soc-events
-  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
-endif
-
-LINUXINCLUDE += \
-		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
-		-Iarch/$(LINUX_KARCH)/include \
-		-Iarch/$(LINUX_KARCH)/include/generated \
-		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
-		-I$(LINUX_DIR)/include/generated/uapi \
-		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
-		-include ./include/linux/kconfig.h
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-endef
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		$(PKG_MAKE_FLAGS) \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		LINUXINCLUDE="$(LINUXINCLUDE)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		modules
-endef
-
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-define KernelPackage/easy-soc-events/install-extra
-	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
-endef
-endif
-
-define KernelPackage/easy-soc-events/install
-	$(call KernelPackage/easy-soc-events/install-extra)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
-	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
-endef
-
-$(eval $(call KernelPackage,easy-soc-events-test))
-$(eval $(call KernelPackage,easy-soc-events))

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=0.2
+PKG_SOURCE_VERSION:=0cb8accbac3355b97a17064ec7da010a2c42db7b
+
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptmngr-open
+else
+PKG_SOURCE_URL:=git@private.inteno.se:endptmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_NAME:=endptmngr
+endif
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Brcmslic
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
+endef
+
+endif
+
+
+define Package/endptmngr/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

ethmngr/Config.in

@@ -1,9 +0,0 @@
-if (PACKAGE_ethmngr)
-
-menu "Configurations"
-
-config TR181_VENDOR_EXTENSIONS_MACVLAN
-	bool "Use TR181 vendor extension MACVLAN"
-	default y
-endmenu
-endif

ethmngr/Makefile

@@ -1,77 +0,0 @@
-#
-# Copyright (C) 2020-2024 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.6
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b1ca967248cc5c7b852e8a904134e0bed451a116
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-define Package/ethmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl +libeasy +libbbfdm-api
-endef
-
-define Package/ethmngr/description
- This package can be used to configure and provide status about
- the ethernet interfaces and ports through UBUS.
- It uses APIs from the libethernet.so library.
-endef
-
-define Package/$(PKG_NAME)/config
-       source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./ethmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE \
-	-DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
-
-ifeq ($(CONFIG_TR181_VENDOR_EXTENSIONS_MACVLAN),y)
-TARGET_CFLAGS += -DTR181_VENDOR_EXTENSIONS_MACVLAN
-endif
-
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
-
-define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/ethmngr
-	$(INSTALL_DIR) $(1)/etc/ethmngr/plugins
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
-	$(CP) $(PKG_BUILD_DIR)/libbbfethernet.so $(1)/etc/ethmngr
-	$(CP) $(PKG_BUILD_DIR)/libbbfethernetmacvlan.so $(1)/etc/ethmngr/plugins
-	$(call BbfdmInstallMicroServiceInputFile,$(1),./files/etc/bbfdm/micro_services/ethernet.json)
-endef
-
-$(eval $(call BuildPackage,ethmngr))

ethmngr/files/etc/bbfdm/micro_services/ethernet.json

@@ -1,18 +0,0 @@
-{
-	"daemon": {
-		"config": {
-			"loglevel": "1"
-		},
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/ethmngr/libbbfethernet.so",
-			"plugin_dir": "/etc/ethmngr/plugins"
-		},
-		"output": {
-			"type": "UBUS",
-			"parent_dm": "Device.",
-			"object": "Ethernet",
-			"root_obj": "bbfdm"
-		}
-	}
-}

ethmngr/files/etc/hotplug.d/ethernet/ethport-deprecated-ubus-event

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-[ -n "$PORT" -a -n "$LINK" ] || exit 0
-
-case "$PORT" in
-	# do not generate ethport ubus event
-	# for wifi, dsl and brige devices
-	wl*|wds*|atm*|ptm*|br-*)
-		exit 0
-	;;
-esac
-
-speed=0
-duplex=full
-
-if [ "$LINK" = "up" ]; then
-	devspeed="$(ubus -t 2 call network.device status "{\"name\":\"$PORT\"}" | jsonfilter -e @.speed)"
-	speed=${devspeed:0:-1}
-	duplex=${devspeed:0-1}
-	[ "$duplex" == "H" ] && duplex="half" || duplex="full"
-fi
-
-ubus send ethport "{\"ifname\":\"$PORT\",\"link\":\"$LINK\",\"speed\":\"$speed\",\"duplex\":\"$duplex\"}"

ethmngr/files/etc/init.d/ethmngr

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger network
-}

ethmngr/files/etc/ruleng/ethport.json

@@ -1,20 +0,0 @@
-{
-	"ethport_update": {
-		"if" : [
-			{
-				"event": "network.device"
-			}
-		],
-		"then" : [
-			{
-				"cli": "/sbin/hotplug-call ethernet",
-				"envs": {
-					"PORT": "&network.device->ifname",
-					"LINK": "&network.device->link"
-				},
-				"timeout": 1
-			}
-		]
-	}
-}
-

ethmngr/files/etc/uci-defaults/ruleng.ethport

@@ -1,2 +0,0 @@
-uci -q set ruleng.ethport=rule
-uci -q set ruleng.ethport.recipe='/etc/ruleng/ethport.json'

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

fdtextract/Makefile

@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fping
+PKG_VERSION:=4.0
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fping.org/dist/
+PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
+
+PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fping
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
+  URL:=http://fping.org/
+endef
+
+
+define Package/fping/description
+	fping is a ping like program which uses the Internet Control Message Protocol
+	(ICMP) echo request to determine if a target host is responding.  fping
+	differs from ping in that you can specify any number of targets on the command
+	line, or specify a file containing the lists of targets to ping.  Instead of
+	sending to one target until it times out or replies, fping will send out a
+	ping packet and move on to the next target in a round-robin fashion.
+endef
+
+CONFIGURE_ARGS+= \
+	--enable-ipv4 \
+	--enable-ipv6
+
+TARGET_CFLAGS += -std=gnu99
+
+define Package/fping/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fping))

fscryptctl/Makefile

@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fscryptctl
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/google/fscryptctl.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Encryption
-  TITLE:=Fscryptctl
-endef
-
-define Package/$(PKG_NAME)/description
-	fscryptctl is a low-level tool written in C that handles raw keys and manages policies for Linux filesystem encryption,
-	specifically the "fscrypt" kernel interface which is supported by the ext4, f2fs, and UBIFS filesystems
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		fscryptctl
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fscryptctl $(1)/usr/bin/fscryptctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -1,66 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
-  PKG_LICENSE:=GPLv2
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,330 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	} else {
-		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	}
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	}
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */