map-agent: prints to debug invalid backhaul set

Fix the SIP response code handling and optimization
(cherry picked from commit d70c637aa4)

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -10,12 +10,20 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
 config BBF_TR143
 	bool "Enable TR-143 Data Model Support"
 	default y
 
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default y
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
 	default y
 
 config BBF_MAX_OBJECT_INSTANCES

bbf/Makefile

@@ -0,0 +1,179 @@
+#
+# Copyright (C) 2022 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.8.7
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=28ed108048c4d63bd0dc16dbf37ad52ea60c57b6
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for libbbfdm API
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
+
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+endef
+
+define Package/libbbfdm/default/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+endef
+
+define Package/libbbfdm/default/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbfdm/Makefile

@@ -1,251 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.4.23.15
-
-USE_LOCAL:=0
-ifneq ($(USE_LOCAL),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=3007f6fc86e84b6b460dbea0bf77c4cf522d06c1
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbfdm-api \
-	    +BBF_TR471:obudpst
-endef
-
-define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (default)
-  VARIANT:=default
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  CONFLICTS := libbbfdm libbbfdm-openssl libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  VARIANT:=openssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-wolfssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  VARIANT:=wolfssl
-  CONFLICTS := libbbfdm libbbfdm-mbedtls libbbfdm-openssl
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libbbfdm-api +PACKAGE_libbbfdm-mbedtls:libbbfdm-mbedtls \
-		   +PACKAGE_libbbfdm-openssl:libbbfdm-openssl +PACKAGE_libbbfdm-wolfssl:libbbfdm-wolfssl \
-		   +PACKAGE_libbbfdm:libbbfdm
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR143 data models
-endef
-
-ifeq ($(USE_LOCAL),1)
-define Build/Prepare
-	$(CP) ~/git/bbfdm/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-	-DBBF_WIFI_DATAELEMENTS=ON
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
-ifeq ($(CONFIG_PACKAGE_bbfdmd),y)
-CMAKE_OPTIONS += \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760
-endif
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/libbbfdm-api.so $(1)/lib/
-endef
-
-define Package/libbbfdm/default/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm/libbbfdm.so $(1)/lib/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-portmap-firewall $(1)/etc/uci-defaults/95-portmap-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/97-firewall-service $(1)/etc/uci-defaults/97-firewall-service
-	$(INSTALL_BIN) ./files/etc/uci-defaults/99-link-core-plugins $(1)/etc/uci-defaults/99-link-core-plugins
-	$(INSTALL_BIN) ./files/etc/firewall.portmap $(1)/etc/firewall.portmap
-	$(INSTALL_BIN) ./files/etc/firewall.service $(1)/etc/firewall.service
-ifeq ($(CONFIG_BBF_TR143),y)
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libbbfdm/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-endif
-endef
-
-define Package/libbbfdm/default/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/bbfdm/input.json $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_BIN) ./files/etc/bbfdm/bbfdm_services.sh $(1)/etc/bbfdm/
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-endef
-
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/userinterface $(1)/lib/upgrade/keep.d/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/94-userinterface-json $(1)/etc/uci-defaults/94-userinterface-json
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
-Package/libbbfdm/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/tr181/device.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm/dmtree/vendor/vendor.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbfdm-api/
-	# Work around for backward compatibility
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/include/libbbfdm_api.h $(1)/usr/include/libbbf_api.h
-endef
-
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))
-$(eval $(call BuildPackage,bbfdmd))
-
-$(eval $(call BuildPackage,userinterface))

bbfdm/bbfdm.mk

@@ -1,9 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-
-define BbfdmInstallPlugin
-	$(INSTALL_DIR) $(1)/etc/bbfdm/plugins
-	$(INSTALL_DATA) $(2) $(1)/etc/bbfdm/plugins/
-endef

bbfdm/files/etc/bbfdm/bbfdm_services.sh

@@ -1,47 +0,0 @@
-#!/bin/sh
-
-BBFDMD="/usr/sbin/bbfdmd"
-
-bbfdm_add_service()
-{
-	local name path
-
-	name="${1}"
-	path="${2}"
-
-	if [ -z "${name}" -o -z "$path" ]; then
-		return 0;
-	fi
-
-	ubus call service add "{'name':'bbfdm.services','instances':{'$name':{'command':['$BBFDMD','-m','$path']}}}"
-}
-
-bbfdm_stop_service()
-{
-	local name
-
-	name="${1}"
-	if [ -z "${name}" ]; then
-		return 0;
-	fi
-
-	if ubus call service list '{"name":"bbfdm.services"}' |grep -q "bbfdm.$name"; then
-		ubus call service delete "{'name':'bbfdm.services','instance':'bbfdm.$name'}"
-	fi
-}
-
-usages()
-{
-	echo "Usages $0: <OPTIONS>..."
-	echo
-	echo "    -h    show help"
-	echo "    -k    micro-service name to stop"
-	echo
-}
-
-while getopts "s:k:h" opts; do
-	case "$opts" in
-		h) usages; exit 0;;
-		k) bbfdm_stop_service "${OPTARG}";;
-	esac
-done

bbfdm/files/etc/bbfdm/input.json

@@ -1,28 +0,0 @@
-{
-        "daemon": {
-                "config": {
-                },
-                "input": {
-                        "type": "DotSo",
-                        "name": "/lib/libbbfdm.so",
-                        "plugin_dir": "/etc/bbfdm/plugins"
-                },
-                "output": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                }
-        },
-        "cli": {
-                "config": {
-                        "proto": "both",
-                        "instance_mode": 0
-                },
-                "input": {
-                        "type": "UBUS",
-                        "name": "bbfdm"
-                },
-                "output": {
-                        "type": "CLI"
-                }
-        }
-}

bbfdm/files/etc/config/bbfdm

@@ -1,8 +0,0 @@
-
-config bbfdmd 'bbfdmd'
-	option enabled '1'
-	option loglevel '1'
-	option refresh_time '10'
-	option transaction_timeout '30'
-	option subprocess_level '2'
-

bbfdm/files/etc/config/userinterface

@@ -1,3 +0,0 @@
-config userinterface 'global'
-	option enable '1'
-

bbfdm/files/etc/firewall.portmap

@@ -1,43 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-reorder_dnat_rules() {
-	nat_chains=$(iptables -t nat -S | grep -E "^-N zone[a-zA-Z0-9_]+prerouting$" | cut -d' ' -f 2)
-
-	for chain in ${nat_chains}; do
-		# Collect empty remote host & empty dport rules
-		EMPTY_HOST_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep -v "\-s ")
-
-		# Collect empty remote host but non empty dport rules
-		EMPTY_HOST=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep "\-\-dport" | grep -v "\-s ")
-
-		# Collect non empty remote host but empty dport rules
-		EMPTY_PORT=$(iptables -t nat -S ${chain} | grep -E "REDIRECT|DNAT" | grep -v "\-\-dport" | grep "\-s ")
-
-		# Skip this chain if no matching rules were found
-		[ -n "${EMPTY_HOST_PORT}" -o -n "${EMPTY_HOST}" -o -n "${EMPTY_PORT}" ] || continue
-
-		(
-			echo '*nat'
-
-			# Delete collected rules
-			[ -n "${EMPTY_HOST_PORT}" ] && echo "${EMPTY_HOST_PORT}" | sed 's/^-A /-D /'
-			[ -n "${EMPTY_HOST}" ] && echo "${EMPTY_HOST}" | sed 's/^-A /-D /'
-			[ -n "${EMPTY_PORT}" ] && echo "${EMPTY_PORT}" | sed 's/^-A /-D /'
-
-			# Now add rules as per datamodel precedence shown below
-			## Non empty remote host, empty dport
-			## empty remote host, non empty dport
-			## empty remote host, empty dport
-			[ -n "${EMPTY_PORT}" ] && echo "${EMPTY_PORT}"
-			[ -n "${EMPTY_HOST}" ] && echo "${EMPTY_HOST}"
-			[ -n "${EMPTY_HOST_PORT}" ] && echo "${EMPTY_HOST_PORT}"
-
-			echo 'COMMIT'
-		) | iptables-restore -w -n
-	done
-}
-
-# Re-order portmapping rules according to precedence hierarchy
-reorder_dnat_rules

bbfdm/files/etc/firewall.service

@@ -1,163 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-log() {
-	echo "${@}"|logger -t firewall.service -p info
-}
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-		echo "-1"
-		return 0
-	fi
-
-	echo "0"
-	return 0
-}
-
-add_iptable_rule() {
-	chain_name=$1
-	protocol=$2
-	dest_port=$3
-	icmp_type=$4
-	family=$5
-	src_prefix=$6
-	action=$7
-	res=-1
-
-	cmd="-I ${chain_name}"
-
-	if [ -n "${protocol}" ]; then
-		cmd="${cmd} -p $protocol"
-
-		if [ "${protocol}" -eq 41 ] || [ "${protocol}" -eq 43 ] || [ "${protocol}" -eq 44 ] ||
-		   [ "${protocol}" -eq 58 ] || [ "${protocol}" -eq 59 ] || [ "${protocol}" -eq 60 ]; then
-		   	# Explicit v6 protocols
-			if [ "${family}" = "ipv4" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv6"
-			fi
-		elif [ "${protocol}" -eq 1 ]; then
-		   	# Explicit v4 protocols
-			if [ "${family}" = "ipv6" ]; then
-				echo $res
-				return 0
-			else
-				family="ipv4"
-			fi
-		fi
-
-		# Limitation:: iptables do not accept dport without specific protocol
-		count=$(echo "${dest_port}" | sed -n "/-1/p" | wc -l)
-
-		if [ "${count}" -eq 0 ]; then
-			# dest_port not contains -1 so need to have this match criteria
-			count=$(echo "${dest_port}" | wc -w)
-			if [ "${count}" -gt 1 ]; then
-				# multiple ports present
-				port=$(echo "${dest_port}" | sed "s/ /,/g")
-				cmd="${cmd} -m multiport --dports ${port}"
-			else
-				cmd="${cmd} --dport ${dest_port}"
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv4" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 1 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmp-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd iptables -w ${cmd} -m comment --comment IPtables_service_rule -j "${action}")
-		else
-			#Add ipv4 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 0 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd iptables -w -s "$src_list" ${cmd} -m comment --comment IPtables_service_rule -j "${action}")
-			fi
-		fi
-	fi
-
-	if [ "${family}" = "ipv6" ] || [ "${family}" = "-1" ]; then
-		if [ "${protocol}" -eq 58 ] && [ "${icmp_type}" -ge 0 ]; then
-			cmd="${cmd} --icmpv6-type ${icmp_type}"
-		fi
-
-		if [ -z "${src_prefix}" ]; then
-			res=$(exec_cmd ip6tables -w ${cmd} -m comment --comment IP6tables_service_rule -j "${action}")
-		else
-			#Add ipv6 sources if any
-			src_list=""
-			for src in $src_prefix; do
-				ret=$(echo $src | grep ":" | wc -l)
-				if [ "${ret}" -eq 1 ]; then
-					src_list="$src,$src_list"
-				fi
-			done
-
-			if [ -n "$src_list" ]; then
-				src_list=$(echo "${src_list}" | sed "s/,$//")
-				res=$(exec_cmd ip6tables -w -s "$src_list" ${cmd} -m comment --comment IP6tables_service_rule -j "${action}")
-			fi
-		fi
-	fi
-
-	echo $res
-}
-
-add_service() {
-	local enable proto family dest_port interface target icmp_type
-
-	config_get enable "$1" enable "0"
-	config_get icmp_type "$1" icmp_type "-1"
-	config_get target "$1" target "Accept"
-	config_get interface "$1" interface ""
-	config_get family "$1" family "-1"
-	config_get dest_port "$1" dest_port "-1"
-	config_get proto "$1" proto "-1"
-	config_get src_prefix "$1" src_prefix ""
-
-	if [ "${enable}" -eq 0 ] || [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	action=$(echo "${target}" | tr a-z A-Z)
-	chain_name="zone_${interface}_input"
-	res=0
-
-	count=$(echo "${proto}" | sed -n "/-1/p" | wc -l)
-
-	if [ "${count}" -eq 0 ]; then
-		# proto not contains -1 so need to have this match criteria
-		for protocol in $proto; do
-			res=$(add_iptable_rule "$chain_name" "$protocol" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-		done
-	else
-		# proto contains -1 so no need to have this match criteria
-		res=$(add_iptable_rule "$chain_name" "" "$dest_port" "$icmp_type" "$family" "$src_prefix" "$action")
-	fi
-
-	if [ "${res}" -ne 0 ]; then
-		uci -q set firewall."${1}".status="Error"
-	else
-		uci -q set firewall."${1}".status=""
-	fi
-
-	uci commit firewall
-}
-
-config_load firewall
-config_foreach add_service "service"

bbfdm/files/etc/firewall.userinterface

@@ -1,125 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="UI-REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ] || [ ! -f "/etc/config/nginx" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-delete_ui_firewall_rules() {
-	input_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output_chains=$(iptables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output_chains}; do
-		CMD="iptables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd iptables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	input6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+input$" | cut -d' ' -f 2)
-	output6_chains=$(ip6tables -S | grep -E "^-N zone[a-zA-Z0-9_]+output$" | cut -d' ' -f 2)
-
-	for chain in ${input6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-
-	for chain in ${output6_chains}; do
-		CMD="ip6tables -w 1 -t filter -nL ${chain} --line-numbers"
-		while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-			rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-			if [ -n "${rule_num}" ]; then
-				exec_cmd ip6tables -w 1 -t filter -D "${chain}" "${rule_num}";
-			fi
-		done
-	done
-}
-
-configure_ui_firewall_rule() {
-	local sec="${1}"
-	local enabled access interface
-	local port=""
-
-	config_get_bool enabled "${sec}" uci_enable '1'
-	config_get access "${sec}" uci_access ""
-	config_get interface "${sec}" uci_interface ""
-
-	if [ "${enabled}" -eq "1" ] && [ "${access}" == "remote" ] && [ -n "${interface}" ]; then
-		port_list=$(uci -q show nginx."${1}".listen|cut -d'=' -f 2|sed "s/'/ /g"|sed "s/\[\:\:\]\://g")
-		for item in ${port_list}; do
-			if [ -z "${item##[0-9]*}" ]; then
-				port="${item}"
-				break
-			fi
-		done
-
-		if [ -z "${port}" ]; then
-			return 0
-		fi
-
-		zone="zone_${interface}_input"
-		iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		zone="zone_${interface}_output"
-		iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-
-		ip6tables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-		if [ "$?" -eq 0 ]; then
-			ip6tables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-		fi
-	fi
-}
-
-# Delete existing remote access rules
-delete_ui_firewall_rules
-
-config_load userinterface
-config_get_bool serv_enable global enable 1
-
-if [ "${serv_enable}" -eq "1" ]; then
-	config_load nginx
-	# Configure the User Interface rule
-	config_foreach configure_ui_firewall_rule server
-fi

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbfdmd

@@ -1,76 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-BBFDM_JSON_INPUT="/etc/bbfdm/input.json"
-BBFDM_TEMP_JSON="/tmp/bbfdm/input.json"
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enabled:bool:true' \
-		'sock:string' \
-		'debug:bool:false' \
-		'loglevel:uinteger:1' \
-		'refresh_time:uinteger:0' \
-		'transaction_timeout:uinteger:30' \
-		'subprocess_level:uinteger'
-}
-
-configure_bbfdmd()
-{
-	local enabled debug sock update
-	local jlog jrefresh jtimeout jlevel
-
-	update=0
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enabled}" -eq 0 ] && return 0
-
-	if [ -f "${BBFDM_JSON_INPUT}" ]; then
-		echo "$(jq --arg log ${loglevel} --arg tran ${transaction_timeout} --arg refresh ${refresh_time} --arg level ${subprocess_level} '.daemon.config += {"loglevel": $log, "refresh_time": $refresh, "transaction_timeout": $tran, "subprocess_level": $level}' ${BBFDM_JSON_INPUT})" > ${BBFDM_TEMP_JSON}
-	fi
-
-	procd_set_param command ${PROG}
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	if [ -f "${sock}" ]; then
-		procd_append_param command -s "${sock}"
-	fi
-}
-
-start_service()
-{
-	mkdir -p /tmp/bbfdm
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-
-	ubus call service state '{"name":"bbfdm.services", "spawn":true}'
-}
-
-stop_service()
-{
-	ubus call service state '{"name":"bbfdm.services", "spawn":false}'
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/init.d/userinterface

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	if [ ! -f "/etc/config/nginx" ]; then
-		return 0
-	fi
-
-	if [ "${enable}" -eq "1" ]; then
-		ubus call service state '{"name":"nginx", "spawn":true}'
-	else
-		ubus call service state '{"name":"nginx", "spawn":false}'
-	fi
-
-	# Inject firewall rules
-	procd_open_instance userinterface
-	/etc/firewall.userinterface
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface" "nginx"
-}

bbfdm/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/94-userinterface-json

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# This deletes the userinterface json plugin if exists in case of upgrade
-if [ -f "/etc/bbfdm/json/UserInterface.json" ]; then
-	rm /etc/bbfdm/json/UserInterface.json
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/95-portmap-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.port_hook
-        set firewall.port_hook=include
-        set firewall.port_hook.path=/etc/firewall.portmap
-        set firewall.port_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-
-	# Apply the changes
-	uci commit network
-	sysctl -e -p "${bbfdm_sysctl_conf}" >&-
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/etc/uci-defaults/97-firewall-service

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.service_hook
-        set firewall.service_hook=include
-        set firewall.service_hook.path=/etc/firewall.service
-        set firewall.service_hook.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbfdm/files/etc/uci-defaults/99-link-core-plugins

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-UNIFIED_PATH="/etc/bbfdm/plugins/"
-
-# Link JSON plugins
-for f in `ls -1 /etc/bbfdm/json/*.json`; do
-	echo "# BBFDM JSON plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-# Link DotSo plugins
-for f in `ls -1 /usr/lib/bbfdm/*.so`; do
-	echo "# BBFDM DotSO plugin ${f} not aligned #"
-	ln -s ${f} "${UNIFIED_PATH}"
-done
-
-exit 0
-

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/files/lib/upgrade/keep.d/userinterface

@@ -1 +0,0 @@
-/etc/nginx/allow_host_*

bulkdata/Makefile

@@ -1,26 +1,32 @@
 #
 # Copyright (C) 2022 iopsys Software Solutions AB
 #
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.3
+PKG_VERSION:=2.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=f556410b51a2248f11358793f11ae54d3e53e85e
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -28,7 +34,7 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
@@ -43,9 +49,9 @@ endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/	
-	$(INSTALL_DIR) $(1)/etc/bulkdata
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bulkdata
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/bulkdata/input.json

@@ -1,15 +0,0 @@
-{
-	"daemon": {
-		"input": {
-			"type": "JSON",
-			"name": "/etc/bulkdata/bulkdata.json"
-		},
-		"output": {
-			"type": "UBUS",
-			"name": "bbfdm.bulkdata",
-			"parent_dm": "Device.",
-			"object": "BulkData",
-			"root_obj": "bbfdm"
-		}
-	}
-}

bulkdata/files/etc/init.d/bulkdatad

@@ -1,28 +1,26 @@
 #!/bin/sh /etc/rc.common
 
-START=60
+START=99
 STOP=10
 
-. /etc/bbfdm/bbfdm_services.sh
-
 USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
-BULKDATA_JSON_INPUT="/etc/bulkdata/input.json"
 
 start_service() {
-	local enable
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
 
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	[ "$enable" -eq "1" ] && {
-		procd_open_instance "bulkdata"
-		procd_set_param command "$PROG"
-		procd_set_param respawn
-		procd_close_instance "bulkdata"
+	[ "$enable" != "1" ] && {
+		return 0
 	}
 
-	bbfdm_add_service "bbfdm.bulkdata" "${BULKDATA_JSON_INPUT}"
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn "3" "7" "0"
+	procd_close_instance
+}
+
+boot() {
+	start
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -16,8 +16,8 @@ get_next_count()
 	fi
 
 	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
 			count=$((count + 1))
 		else
 			found=1;
@@ -39,8 +39,8 @@ translate_profile_id_to_profile_name() {
 	
 	[ "${curr_profile_id}" != "${profile_id}" ] && return
 
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
 }
 
 update_profile_sections() {
@@ -54,7 +54,7 @@ update_profile_sections() {
 
 	case "${section}" in
 		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
 			uci_rename bulkdata "${section}" "${profile_name}"
 		;;
 	esac
@@ -62,7 +62,7 @@ update_profile_sections() {
 
 	[ -n "$profile_name" ] && section="${profile_name}"
 
-	uci -q set bulkdata."${section}".profile_id=""
+	uci -q set bulkdata.${section}.profile_id=""
 
 	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
 	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 4
-
-endmenu

decollector/Makefile

@@ -1,80 +0,0 @@
-#
-# Copyright (C) 2021-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=4.2.1.1.1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7e75bf1fc5fa328d91c071f1f243df6951bb397e
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

dectmngr/Makefile

@@ -1,14 +1,20 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.6.5
+PKG_VERSION:=3.5.4
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=192e74db2082e3f89f6defe9d752d752b0b09079
+PKG_SOURCE_VERSION:=54ebb54162fae9fdd6e327e430cf57aa217c176d
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -28,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
 endef
 
 define Package/$(PKG_NAME)/description

dectmngr/files/etc/init.d/dectmngr

@@ -6,63 +6,31 @@ START=70
 STOP=12
 
 USE_PROCD=1
+NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
 
-DECT_GPIO="$(gpiofind DCX81_RSTN | cut -d ' ' -f 2 2>/dev/null)"
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
+	pidof $NAME && killall -q $NAME
 
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
 		sleep 1
 	done
 }
 
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$device"
-			return 0
-		fi
-	done
-	return 1
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
 	local rxtun=
 
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
-
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device=/dev/ttyH0
-	fi
+	test $(db get hw.board.hasDect) = "0" && return
 
 	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
 
@@ -83,25 +51,18 @@ start_service() {
 	config_get log_dect_cmbs global log_dect_cmbs syslog
 
 	procd_open_instance
-
-	# dectmngr takes expects device without /dev
-	readonly dcx81_uart_device_wo_dev="${dcx81_uart_device##/dev/}"
-	case "$log_dect_cmbs" in
-	none)
+	if [ "$log_dect_cmbs" = "none" ]; then
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" $opt_ext
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	file)
+	elif [ "$log_dect_cmbs" = "file" ]; then
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device_wo_dev" -syslog $opt_ext
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	esac
+	fi
 
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
@@ -110,7 +71,7 @@ start_service() {
 }
 
 stop_service() {
-	has_dect || return 0
+	test $(db get hw.board.hasDect) = "0" && return
 
 	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
 	stop_and_wait_dectmngr
@@ -120,7 +81,8 @@ reload_service() {
 	ubus call dect reload
 }
 
-service_triggers() {
+service_triggers()
+{
 	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
 	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
 }
@@ -135,3 +97,4 @@ boot() {
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
+

dslmngr/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018-2024 iopsys Software Solutions AB
+# Copyright (C) 2018 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,15 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.1
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cb8b8fd2549751bcd38808391b76a1a9a908c4de
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -27,7 +26,7 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
 else
   $(info Unexpected CONFIG_TARGET)
@@ -60,7 +59,7 @@ MAKE_FLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-	rsync -r --exclude=.* ./dslmngr/ $(PKG_BUILD_DIR)/
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -69,10 +68,6 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
 endef
 
 define Package/easy-qos/description

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,130 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=6.4.44
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=e4f811b7cd2836cdcce5ea0f97f515a317da5bc3
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptmngr
+PKG_VERSION:=0.7
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=c099d6b0438f945d91bf3c9718da730a8a52ff27
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom Voice Endpoint Manager
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
+
+define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -4,17 +4,13 @@ START=68
 STOP=12
 
 USE_PROCD=1
-NAME=voicemngr
+NAME=endptmngr
 
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
-	[ -d "/usr/lib/broadcom" ] && BCM_LIBS=LD_LIBRARY_PATH=/lib/broadcom:/usr/lib/broadcom
-
 	procd_open_instance
-	procd_set_param env hw_board_hasDect="$(db get hw.board.hasDect)" \
-			    hw_board_VoicePortNames="$(db get hw.board.VoicePortNames)" \
-			    $BCM_LIBS
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"
 	procd_set_param nice -12
@@ -27,5 +23,5 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger asterisk
+	procd_add_reload_trigger asterisk 
 }

ethmngr/Makefile

@@ -1,21 +1,18 @@
 #
-# Copyright (C) 2020-2024 Iopsys
+# Copyright (C) 2020 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.3
+PKG_VERSION:=2.0.1
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5b40a8167d3e0e5c8fc9229abccd5c6acecbe814
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
-endif
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
@@ -26,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_ipq53xx||TARGET_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -35,28 +32,15 @@ define Package/ethmngr/description
  It uses APIs from the libethernet.so library.
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ./ethmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-define Build/Compile
-endef
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_ipq53xx)$(CONFIG_TARGET_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/etc/init.d/ethmngr

@@ -1,28 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger network
-}

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

evoice/Makefile

@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=f2477946f9e142d01820b38e32ce98a781e0310e
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +TARGET_iopsys_brcm63xx_arm:bcmkernel +TARGET_iopsys_econet:kmod-voip_driver
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and change the path below to your own git repository.
+define Build/Prepare
+	rsync -av /swdev/bide/evoice_clean/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	TARGET_PLATFORM=BROADCOM
+	export IDIR = $(STAGING_DIR)/usr/include
+	export BDIR = bcm963xx/userspace/private/apps/voice
+	export _XFLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc -I$(IDIR)/bcm963xx/xchg/bos/publicInc -I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+	TARGET_PLATFORM=ECONET
+endif
+
+export TARGET_PLATFORM
+
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=SVrgBcmFxs LIF=cerder DBG=dbg
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=libvoiceservice LIF=cerder DBG=dbg
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,345 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config Capabilities 'Capabilities'
+	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+
+config CapabilitiesCodec 'Codec5'
+	option Codec 'G.729'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'Codec1'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'Codec2'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'Codec3'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'Codec4'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'Codec5'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '3PrefixInfo1'
+	list PrefixList '3PrefixInfo2'
+	list PrefixList '3PrefixInfo3'
+	list PrefixList '3PrefixInfo4'
+	list PrefixList '3PrefixInfo5'
+	list PrefixList '3PrefixInfo6'
+	list PrefixList '3PrefixInfo7'
+	list PrefixList '3PrefixInfo8'
+	list PrefixList '3PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '4PrefixInfo1'
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '4PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicecap

@@ -0,0 +1,38 @@
+# Capabilties are platform dependent. Keep these separated from customer configuration
+ 
+config capabilities_prm 'limits'
+	option MaxCallLogCount '100'
+
+config capabilities_prm 'features'
+	option QIModelsSupported 'G.107'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+	option BitRate '32000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.729'
+	option BitRate '8000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,166 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable 'voice.Network@.Enable'
+   option Registration_Server 'voice.Network@.RegistrarServer'
+   option Outbound_Proxy 'voice.Network@.ProxyServer'
+   option SIP_Port 'voice.Network@.RegistrarServerPort'
+   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
+   option T1 'voice.Network@.TimerT1'
+   option UserAgentDomain 'voice.Network@.UserAgentDomain'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,57 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option SIP_SessTmrEnable '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+

evoice/files/etc/init.d/evoice

@@ -0,0 +1,22 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=evoice
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=0ebaf1e7d1f09318ae75d0f475a25280742b790e
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2

fscryptctl/Makefile

@@ -1,42 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fscryptctl
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/google/fscryptctl.git
-PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Encryption
-  TITLE:=Fscryptctl
-endef
-
-define Package/$(PKG_NAME)/description
-	fscryptctl is a low-level tool written in C that handles raw keys and manages policies for Linux filesystem encryption,
-	specifically the "fscrypt" kernel interface which is supported by the ext4, f2fs, and UBIFS filesystems
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) \
-		CC="$(TARGET_CC)" \
-		LDFLAGS="$(TARGET_LDFLAGS)" \
-		fscryptctl
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fscryptctl $(1)/usr/bin/fscryptctl
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
+  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,8 +41,20 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-# support compilation against BCM SDK kernel
-include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	MODULES_SUBDIR:=lib/modules/4.19.183
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
 
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -220,6 +220,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	}
 
@@ -227,6 +228,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
@@ -244,6 +246,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	}
 
@@ -251,6 +254,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

hostmngr/Config.in

@@ -1,15 +0,0 @@
-if (PACKAGE_hostmngr)
-
-menu "Configuration"
-
-config HOSTMNGR_HOSTS_HISTORY
-	bool "Keep history of hosts"
-	default y
-
-config HOSTMNGR_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
-
-endmenu
-
-endif

hostmngr/Makefile

@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=hostmngr
-PKG_VERSION:=1.1.7
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=79a6649995752da3501808debeed9e3ddfdf4d59
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/hostmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-
-define Package/hostmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Show and manage hosts in the network
-  DEPENDS= +libubox +libuci +libubus +ubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +libnfnetlink +libmnl \
-	   +libnetfilter-conntrack \
-	   +HOSTMNGR_PLATFORM_HAS_WIFI:libwifi +libbbfdm-api
-
-endef
-
-define Package/hostmngr/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/hostmngr/description
- This package provides hostmngr that can detect and show host devices
- present in the network.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
-	-D_GNU_SOURCE
-
-ifeq ($(CONFIG_HOSTMNGR_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
-endif
-
-MAKE_PATH:=src
-
-define Package/hostmngr/install
-	$(CP) ./files/etc $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/hostmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/hostmngr $(1)/usr/sbin/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/bbf_plugin/libhostmngr.so $(1)/etc/hostmngr/
-	$(INSTALL_DATA) ./files/etc/hostmngr/input.json $(1)/etc/hostmngr/	
-	$(INSTALL_DIR) $(1)/usr/share/hostmngr
-	$(INSTALL_DATA) ./files/scripts/hosts_acl.sh $(1)/usr/share/hostmngr/
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -r --exclude=.* ~/git/hostmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,hostmngr))

hostmngr/files/etc/config/hosts

@@ -1,9 +0,0 @@
-
-config global 'global'
-	option enabled '1'
-	option history '1'
-	option history_file '/etc/hosts_history.json'
-	option history_timeout '86400'
-
-config interface
-	list ifname 'br-lan'

hostmngr/files/etc/firewall.hosts

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-sh /usr/share/hostmngr/hosts_acl.sh

hostmngr/files/etc/hostmngr/input.json

@@ -1,16 +0,0 @@
-{
-	"daemon": {
-		"input": {
-			"type": "DotSo",
-			"name": "/etc/hostmngr/libhostmngr.so"
-		},
-		"output": {
-			"type": "UBUS",
-			"name": "bbfdm.hosts",
-			"parent_dm": "Device.",
-			"object": "Hosts",
-			"root_obj": "bbfdm"
-		}
-	}
-}
-

hostmngr/files/etc/init.d/hostmngr

@@ -1,33 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=65
-STOP=20
-
-. /etc/bbfdm/bbfdm_services.sh
-
-USE_PROCD=1
-
-HOSTS_JSON_INPUT="/etc/hostmngr/input.json"
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "/usr/sbin/hostmngr" "--config hosts" "-o"  "/tmp/hostmngr.log" "-f"
-#	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param stdout 1
-#	procd_set_param stderr 1
-	procd_close_instance
-	
-	bbfdm_add_service "bbfdm.hosts" "${HOSTS_JSON_INPUT}"
-	sh /usr/share/hostmngr/hosts_acl.sh
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "hosts"
-}
-
-reload_service() {
-	stop
-	start
-}

hostmngr/files/etc/uci-defaults/992-firewall_host.ucidefaults

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-if [ -f /etc/firewall.hosts ]; then
-	uci -q get firewall.hosts || {
-		uci -q set firewall.hosts=include
-		uci -q set firewall.hosts.path="/etc/firewall.hosts"
-		uci -q set firewall.hosts.reload=1
-	}
-fi
-
-
-exit 0

hostmngr/files/etc/uci-defaults/993-topology-hosts-to-hostmngr-hosts-config

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-uci -q get hosts.global.ageing_timer || exit 0
-
-
-# Old hosts UCI config is detected; Convert to new format
-
-ageing_timer="$(uci -q get hosts.global.ageing_timer)"
-history_timeout=$((ageing_timer*60))
-
-uci -q set hosts.global.enabled=1
-uci -q delete hosts.global.ageing_timer
-uci -q set hosts.global.history_timeout="$history_timeout"
-uci -q rename hosts.global.reboot_persistent=history
-uci -q set hosts.global.history_file="/etc/hosts_history.json"
-
-uci -q add hosts interface
-for ifname in $(uci -q get hosts.global.ifname); do
-	uci -q add_list hosts.@interface[-1].ifname="$ifname"
-done
-
-uci -q delete hosts.global.ifname
-exit 0

hostmngr/files/scripts/hosts_acl.sh

@@ -1,233 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-day=""
-next_days=""
-prev_days=""
-IP_RULE=""
-IP_RULE1=""
-
-get_next_day() {
-	local weekday="$1"
-	case "$weekday" in
-		"Mon"|"Monday") echo "Tuesday"
-		;;
-		"Tue"|"Tuesday") echo "Wednesday"
-		;;
-		"Wed"|"Wednesday") echo "Thursday"
-		;;
-		"Thu"|"Thursday") echo "Friday"
-		;;
-		"Fri"|"Friday") echo "Saturday"
-		;;
-		"Sat"|"Saturday") echo "Sunday"
-		;;
-		"Sun"|"Sunday") echo "Monday"
-		;;
-	esac
-}
-
-get_previous_day() {
-	local weekday="$1"
-	case "$weekday" in
-		"Mon"|"Monday") echo "Sunday"
-		;;
-		"Tue"|"Tuesday") echo "Monday"
-		;;
-		"Wed"|"Wednesday") echo "Tuesday"
-		;;
-		"Thu"|"Thursday") echo "Wednesday"
-		;;
-		"Fri"|"Friday") echo "Thursday"
-		;;
-		"Sat"|"Saturday") echo "Friday"
-		;;
-		"Sun"|"Sunday") echo "Saturday"
-		;;
-	esac
-}
-
-ip_rule_west_zone() {
-	local utc_start_t_h="$1"
-	local utc_stop_t_h="$2"
-	local local_start_t_h="$3"
-	local local_stop_t_h="$4"
-	local utc_start_time="$5"
-	local utc_stop_time="$6"
-
-	if [ "$utc_start_t_h" -lt "$local_start_t_h" ]; then
-		IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		if [ -n "$next_days" ]; then
-			IP_RULE="$IP_RULE --weekdays $next_days"
-		fi
-	else
-		if [ "$utc_stop_t_h" -lt "$local_stop_t_h" ]; then
-			IP_RULE1="$IP_RULE"
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop 23:59"
-			IP_RULE1="$IP_RULE1 -m time --timestart 00:00 --timestop $utc_stop_time"
-			if [ -n "$next_days" ]; then
-				IP_RULE1="$IP_RULE1 --weekdays $next_days"
-			fi
-		else
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		fi
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	fi
-}
-
-ip_rule_east_zone() {
-	local utc_start_t_h="$1"
-	local utc_stop_t_h="$2"
-	local local_start_t_h="$3"
-	local local_stop_t_h="$4"
-	local utc_start_time="$5"
-	local utc_stop_time="$6"
-
-	if [ "$utc_start_t_h" -lt "$local_start_t_h" ]; then
-		IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	else
-		if [ "$utc_stop_t_h" -lt "$local_stop_t_h" ]; then
-			IP_RULE1="$IP_RULE"
-			IP_RULE="$IP_RULE -m time --timestart 00:00 --timestop $utc_stop_time"
-			IP_RULE1="$IP_RULE1 -m time --timestart $utc_start_time --timestop 23:59"
-			if [ -n "$prev_days" ]; then
-				IP_RULE1="$IP_RULE1 --weekdays $prev_days"
-			fi
-		else
-			IP_RULE="$IP_RULE -m time --timestart $utc_start_time --timestop $utc_stop_time"
-		fi
-		if [ -n "$day" ]; then
-			IP_RULE="$IP_RULE --weekdays $day"
-		fi
-	fi
-}
-
-process_ac_schedule() {
-	local acs_id="$1"
-	local is_enabled
-	local access_control
-	local start_time=""
-	local mac=""
-
-
-	handle_day_list() {
-		local value=$1
-
-		val=$(echo $value | cut -c 1-3)
-		next_day_val=$(get_next_day $val)
-		prev_day_val=$(get_previous_day $val)
-		if [ -z $day ]; then
-			day="$val"
-			next_days="$next_day_val"
-			prev_days="$prev_day_val"
-		else
-			day="$day,$val"
-			next_days="$next_days,$next_day_val"
-			prev_days="$prev_days,$prev_day_val"
-		fi
-	}
-
-	config_list_foreach "$acs_id" "day" handle_day_list
-	config_get is_enabled "$acs_id" "enable" 1
-	config_get access_control "$acs_id" "dm_parent"
-
-	if [ "$is_enabled" == "0" ] || [ -z "$access_control" ]; then
-		return
-	fi
-
-	IP_RULE=""
-	IP_RULE1=""
-
-	config_get is_enabled "$access_control" "enable" 1
-	if [ "$is_enabled" == "0" ]; then
-		return
-	fi
-
-	mac=$(uci -q get hosts.$access_control.macaddr)
-	access_policy=$(uci -q get hosts.$access_control.access_policy)
-
-	config_get start_time "$acs_id" "start_time"
-	config_get duration "$acs_id" "duration"
-
-	if [ -z "$mac" ] && [ -z "$start_time" ] && [ -z "$duration" ] && [ -z "$day" ] && [ -z "$access_policy" ]; then
-		return
-	fi
-	if [ -n "$mac" ]; then
-		IP_RULE="$IP_RULE -m mac --mac-source $mac"
-	fi
-
-	zone=$(date +%z | cut -c 1)
-	local_start_time=$start_time
-        if [ -n "$duration" ]; then
-		hh=$(echo $local_start_time | awk -F: '{ print $1 }')
-                mm=$(echo $local_start_time | awk -F: '{ print $2 }')
-                hh_s=`expr $hh \* 3600`
-                mm_s=`expr $mm \* 60`
-                ss=$(( hh_s + mm_s ))
-		local_start_hh=$hh
-
-                stop_ss=$(( ss + duration ))
-                hh=$(( stop_ss / 3600 ))
-               	rem_ss=$(( stop_ss % 3600 ))
-               	mm=$(( rem_ss / 60 ))
-               	ss=$(( rem_ss % 60 ))
-		local_stop_time="$hh:$mm:$ss"
-		local_stop_hh=$hh
-	fi
-
-	utc_start_time=$(date -u -d @$(date "+%s" -d "$local_start_time") +%H:%M)
-	utc_stop_time=$(date -u -d @$(date "+%s" -d "$local_stop_time") +%H:%M)
-	utc_start_hh=$(echo $utc_start_time | awk -F: '{ print $1 }')
-	utc_stop_hh=$(echo $utc_stop_time | awk -F: '{ print $1 }')
-	if [ "$zone" == "-" ]; then
-		ip_rule_west_zone $utc_start_hh $utc_stop_hh $local_start_hh $local_stop_hh $utc_start_time $utc_stop_time
-	else
-		ip_rule_east_zone $utc_start_hh $utc_stop_hh $local_start_hh $local_stop_hh $utc_start_time $utc_stop_time
-	fi
-
-	if [ "$access_policy" == "Deny" ]; then
-		IP_RULE="$IP_RULE -j DROP"
-		if [ -n "$IP_RULE1" ]; then
-			IP_RULE1="$IP_RULE1 -j DROP"
-		fi
-	else
-		IP_RULE="$IP_RULE -j ACCEPT"
-		if [ -n "$IP_RULE1" ]; then
-			IP_RULE1="$IP_RULE1 -j ACCEPT"
-		fi
-	fi
-
-	iptables -w -A hosts_forward ${IP_RULE}
-	ip6tables -w -A hosts_forward ${IP_RULE}
-	if [ -n "$IP_RULE1" ]; then
-		iptables -w -A hosts_forward ${IP_RULE1}
-		ip6tables -w -A hosts_forward ${IP_RULE1}
-	fi
-
-	day=""
-	next_days=""
-	prev_days=""
-}
-
-iptables -w -F hosts_forward
-ip6tables -w -F hosts_forward
-
-hosts_forward=$(iptables -t filter --list | grep hosts_forward)
-if [ -z "$hosts_forward" ]; then
-	iptables -w -t filter -N hosts_forward
-	ret=$?
-	[ $ret -eq 0 ] && iptables -w -t filter -I FORWARD -j hosts_forward
-	ip6tables -w -t filter -N hosts_forward
-	ret=$?
-	[ $ret -eq 0 ] && ip6tables -w -t filter -I FORWARD -j hosts_forward
-fi
-
-# Load /etc/config/hosts UCI file
-config_load hosts
-config_foreach process_ac_schedule ac_schedule

icwmp/Config_cwmp.in

@@ -0,0 +1,14 @@
+choice
+       prompt "Select ACS sever"
+       default CWMP_ACS_MULTI
+       depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "Select HDM as ACS server"
+endchoice

icwmp/Makefile

@@ -1,89 +1,107 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.5.29.10
+PKG_VERSION:=8.4.25
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/icwmp.git
-PKG_SOURCE_VERSION:=27231b20dc75075786efa5a122bdefab93669bc9
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_VERSION:=cbfff1b644efceca0b5c72d062535bc766ca1e54
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-include ../bbfdm/bbfdm.mk
 
 define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbfdm-api
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
 endef
 
+define Package/icwmp/config
+	source "$(SOURCE)/Config_cwmp.in"
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
 define Package/icwmp
   $(Package/icwmp/default)
-  VARIANT:=default
-  DEFAULT_VARIANT:=1
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  TITLE += (internal)
+  VARIANT:=internal
 endef
 
 define Package/icwmp-openssl
   $(Package/icwmp/default)
   TITLE += (openssl)
-  VARIANT:=openssl
   DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-wolfssl
+  VARIANT:=openssl
 endef
 
 define Package/icwmp-wolfssl
   $(Package/icwmp/default)
   TITLE += (wolfssl)
-  VARIANT:=wolfssl
   DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp icwmp-mbedtls icwmp-openssl
+  CONFLICTS := icwmp-openssl
+  VARIANT:=wolfssl
 endef
 
 define Package/icwmp-mbedtls
   $(Package/icwmp/default)
   TITLE += (mbedtls)
   DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
+  CONFLICTS := icwmp-openssl icwmp-wolfssl
   VARIANT:=mbedtls
-  CONFLICTS := icwmp icwmp-wolfssl icwmp-openssl
+  DEFAULT_VARIANT:=1
 endef
 
-ifeq ($(BUILD_VARIANT),default)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
 ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+CONFIGURE_ARGS += --enable-libopenssl
 endif
 
 ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+CONFIGURE_ARGS += --enable-libwolfssl
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += --enable-libmbedtls
 endif
 
-ifeq ($(LOCAL_DEV),1)
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
 define Build/Prepare
-	$(CP) -rf ~/git/icwmp/* $(PKG_BUILD_DIR)/
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -94,22 +112,18 @@ define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-set-random-inform-time $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
-	$(call BbfdmInstallPlugin,$(1),./files/etc/bbfdm/json/CWMPManagementServer.json)
-	$(call BbfdmInstallPlugin,$(1),$(PKG_BUILD_DIR)/libcwmpdm.so)
+	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
 endef
 
-Package/icwmp/install = $(Package/icwmp/default/install)
 Package/icwmp-openssl/install = $(Package/icwmp/default/install)
 Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
 Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)

icwmp/files/etc/config/cwmp

@@ -11,17 +11,17 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
-	option skip_dhcp_boot_options '0'
+	option ipv6_enable '0'
+	option ip_version '4'
 
 config cpe 'cpe'
 	option enable '1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
 	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
-	option log_severity 'ERROR'
+	option log_severity 'INFO'
 	option log_file_name '/var/log/icwmpd.log'
 	option log_max_size '102400'
 	option userid '' #$OUI-$SER
@@ -31,17 +31,14 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
-	option disable_gatewayinfo '0'
-	option fw_upgrade_keep_settings '1'
 	
 config lwn 'lwn'
-	option enable '0'
+	option enable '1'
 	option hostname ''
 	option port '0'

icwmp/files/etc/firewall.cwmp

@@ -5,58 +5,46 @@ log() {
 	echo "${@}"|logger -t firewall.cwmp -p info
 }
 
-get_firewall_zone() {
-	zone="$(uci show firewall|grep network|grep ${1}|cut -d. -f 2)"
-	zone="${zone:-wan}" # defaults to wan zone
-	echo "$zone"
-}
-
-cleanup_exiting_rules() {
-        while iptables -w 1 -nL zone_"${1}"_input --line-numbers 2>/dev/null | grep "Open_ACS_port"; do
-		rule_num="$(iptables -w 1 -nL zone_"${1}"_input --line-numbers | grep "Open_ACS_port" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			iptables -w 1 -D zone_"${1}"_input "${rule_num}";
-		fi
-	done
-        while ip6tables -w 1 -nL zone_"${1}"_input --line-numbers 2>/dev/null | grep "Open_ACS_port"; do
-		rule_num="$(ip6tables -w 1 -nL zone_"${1}"_input --line-numbers | grep "Open_ACS_port" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			ip6tables -w 1 -D zone_"${1}"_input "${rule_num}";
-		fi
-	done
-}
-
-enable="$(uci -q get cwmp.cpe.enable)"
-enable="${enable:-1}"
-
-if [ "$enable" -eq 0 ]; then
-	log "CWMP not enabled"
+if [ ! -f "/var/state/cwmp" ]; then
 	exit 0;
 fi
 
-wan="$(uci -q get cwmp.cpe.default_wan_interface)"
-wan="${wan:-wan}"
-
-zone_name="$(get_firewall_zone $wan)"
-
+zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
 port=$(uci -q get cwmp.cpe.port)
-port="${port:-7547}"
+ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
 
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|awk '{print tolower($0)}')
-incoming_rule="${incoming_rule:-port_only}"
-
-ipaddr=$(uci -c /var/state -q get icwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get icwmp.acs.ip6)
+if [ -z "${zone_name}" ]; then
+	log "empty firewall zone name"
+	exit 0
+elif [ "$zone_name" = "icwmp" ]; then
+	iptables -nL zone_icwmp_input 2> /dev/null
+	if [ $? != 0 ]; then
+		iptables -w 1 -N zone_icwmp_input
+		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	else			
+		iptables -w 1 -F zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
+	fi			
+else
+	iptables -w 1 -F zone_icwmp_input 2> /dev/null
+	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -w 1 -X zone_icwmp_input 2> /dev/null
+fi
 
 cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
 cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
 
 # default incoming rule is Port only
+if [ -z "${incoming_rule}" ]; then
+	incoming_rule="port_only"
+fi
+
 if [ "${incoming_rule}" = "ip_only" ]; then
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-	fi
-	if [ -n "${ip6addr}" ]; then
 		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 elif [ "${incoming_rule}" = "port_only" ]; then
@@ -67,9 +55,6 @@ elif [ "${incoming_rule}" = "port_only" ]; then
 else
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-	fi
-
-	if [ -n "${ip6addr}" ]; then
 		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 
@@ -79,23 +64,17 @@ else
 	fi
 fi
 
-cleanup_exiting_rules "${zone_name}"
-
-echo "${cmd}"|grep -q "\-\-dport \|\-s "
+echo ${cmd}|grep -q "\-\-dport \|\-s "
 if [ "$?" -eq 0 ]; then
 	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
 	${cmd}
-	log "Applied [${cmd}]"
 fi
 
-echo "${cmd6}"|grep -q "\-\-dport \|\-s "
+echo ${cmd6}|grep -q "\-\-dport \|\-s "
 if [ "$?" -eq 0 ]; then
 	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
 	${cmd6}
-	log "Applied [${cmd6}]"
 fi
 
-if [ -f "/var/state/icwmp" ]; then
-	uci -c /var/state -q set icwmp.cpe.firewall_restart="init"
-	uci -c /var/state -q commit icwmp
-fi
+uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit cwmp

icwmp/files/etc/icwmpd/update.sh

@@ -0,0 +1,29 @@
+#!/bin/sh
+. /lib/functions.sh
+
+log() {
+	echo "$@" |logger -t cwmp.update -p info
+}
+
+handle_icwmp_update() {
+	local cwmp_enable
+	config_load cwmp
+
+	config_get_bool cwmp_enable cpe enable 1
+	if [ "$cwmp_enable" = "0" ]; then
+		return 0
+	fi
+
+	status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
+	if [ "$status" != "running" ]; then
+		log "Trigger out of bound inform, since last inform status was failure"
+		ubus -t 10 call tr069 inform >/dev/null 2>&1
+		# Handle timeout or tr069 object not found
+		if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
+			log "Restarting icwmp tr069 object"
+			/etc/init.d/icwmpd restart
+		fi
+	fi
+}
+
+handle_icwmp_update $@

icwmp/files/etc/init.d/icwmpd

@@ -23,22 +23,22 @@ regenerate_ssl_link()
 	[ ! -d "${cert_dir}" ] && return 0;
 
 	### Generate all ssl link for pem certicates ###
-	all_file=$(ls "${cert_dir}"/*.pem 2>/dev/null)
+	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
 	if [ -n "${all_file}" ]; then
 		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
 		done
 	fi
 
 	### Generate all ssl link for crt certicates ###
-	all_file=$(ls "${cert_dir}"/*.crt 2>/dev/null)
+	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
 	if [ -n "${all_file}" ]; then
 		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
 		done
 	fi
 }
@@ -47,8 +47,8 @@ enable_dhcp_option43() {
 	local wan="${1}"
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
 	local newreqopts=""
 	local option43_present=0
 
@@ -64,294 +64,8 @@ enable_dhcp_option43() {
 	fi
 
 	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
-		uci commit network
-		ubus call network reload
-	fi
-}
-
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
-
-	echo "${val}"
-}
-
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
-
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		if [ -z "${sendopt}" ]; then
-			local opt125="125,00:00:0D:E9"
-		else
-			local opt125=":00:00:0D:E9"
-		fi
-	fi
-
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ "${oui_len}" -eq 0 ] || [ "${serial_len}" -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ "${class_len}" -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ "${class_len}" -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network."${intf}".sendopts="$new_send_opt"
-	else
-		new_send_opt="$sendopt$opt125"
-		uci -q add_list dhcp."${intf}".dhcp_option="$new_send_opt"
-	fi
-}
-
-check_for_suboptions() {
-	# Check if option 4 and 5 present inside enterprise id 3561
-	data=$(echo "${1}" | sed 's/://g')
-	len=$(printf "${data}"|wc -c)
-
-	rem_len="${len}"
-	while [ $rem_len -gt 8 ]; do
-		subopt_present=0
-
-		ent_id="${data:0:8}"
-		ent_id=$(printf "%d\n" "0x$ent_id")
-		if [ $ent_id -ne 3561 ]; then
-			len_val=${data:8:2}
-			data_len=$(printf "%d\n" "0x$len_val")
-			# add 4 byte for ent_id and 1 byte for len
-			data_len=$(( data_len * 2 + 10 ))
-			# move ahead data to next enterprise id
-			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - data_len ))
-			continue
-		fi
-
-		# read the length of enterprise data
-		len_val=${data:8:2}
-		data_len=$(printf "%d\n" "0x$len_val")
-		# add 4 byte for ent_id and 1 byte for len
-		data_len=$(( data_len * 2 + 10 ))
-
-		len_val=${data:8:2}
-		opt_len=$(printf "%d\n" "0x$len_val")
-		if [ $opt_len -eq 0 ]; then
-			echo ${subopt_present}
-			return 0
-		fi
-
-		# populate the option data of enterprise id
-		sub_data_len=$(( opt_len * 2))
-		# starting 10 means ahead of length field
-		sub_data=${data:10:"${sub_data_len}"}
-
-		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${sub_data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-			case "${sub_opt_id}" in
-			"4") subopt_present=1
-			;;
-			"5") subopt_present=1
-			;;
-			esac
-
-			if [ ${subopt_present} -eq 1 ]; then
-				break;
-			fi
-
-			# get the length of suboption
-			sub_opt_len=${sub_data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# update the remaining sub option hex string length
-			sub_data_len=$((sub_data_len - sub_opt_end))
-
-			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
-		done
-
-		if [ ${subopt_present} -eq 1 ]; then
-			break;
-		else
-			# move ahead data to next enterprise id
-			rem_len=$(( rem_len - $data_len ))
-			data=${data:"${data_len}":"${rem_len}"}
-		fi
-	done
-
-	echo ${subopt_present}
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp."${lan}".dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp."${lan}".dhcp_option)"
-		base_opt=""
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=$(check_for_suboptions "${sopt:4}")
-				base_opt="${sopt}"
-				break
-			fi
-		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			uci -q del_list dhcp."${lan}".dhcp_option="${base_opt}"
-			configure_send_op125 "${base_opt}" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		fi
-	fi
-}
-
-enable_dhcp_option125() {
-	local wan="${1}"
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local sendopts="$(uci -q get network."${wan}".sendopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" = "dhcp" ]; then
-		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
-			uci -q set network."${wan}".reqopts="$newreqopts"
-			network_uci_update=1
-		fi
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "${sendopts}" "${wan}" "network"
-			network_uci_update=1
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
+	if [ "${proto}" == "dhcp" ]; then
+		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
@@ -374,6 +88,12 @@ wait_for_resolvfile() {
 copy_cwmp_etc_files_to_varstate() {
 	mkdir -p /var/run/icwmpd
 
+	if [ -f /etc/icwmpd/cwmp ]; then
+		uci -q -c /etc/icwmpd delete cwmp.acs
+		uci -q -c /etc/icwmpd commit cwmp
+		cp -f /etc/icwmpd/cwmp /var/state/cwmp
+	fi
+
 	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
 		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
 	fi
@@ -392,6 +112,10 @@ copy_cwmp_varstate_files_to_etc() {
 		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
 	fi
 
+	if [ -f /var/state/cwmp ]; then
+		cp -f /var/state/cwmp /etc/icwmpd/
+	fi
+
 	# move the successful custom notify import marker to persistent storage
 	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
 		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
@@ -407,11 +131,11 @@ validate_acs_section()
 		'periodic_inform_time:string' \
 		'url:string' \
 		'dhcp_discovery:string' \
-		'skip_dhcp_boot_options:bool:0' \
 		'dhcp_url:string' \
 		'compression:or("GZIP","Deflate","Disabled")' \
 		'retry_min_wait_interval:range(1, 65535)' \
 		'retry_interval_multiplier:range(1000, 65535)' \
+		'ipv6_enable:bool' \
 		'ssl_capath:string'
 
 }
@@ -437,8 +161,7 @@ validate_cpe_section()
 		'exec_download:bool' \
 		'periodic_notify_enable:bool' \
 		'enable:bool' \
-		'periodic_notify_interval:uinteger' \
-		'fw_upgrade_keep_settings:bool'
+		'periodic_notify_interval:uinteger'
 }
 
 validate_defaults() {
@@ -450,13 +173,10 @@ validate_defaults() {
 		return 1;
 	}
 
-	ssl_capath="${ssl_capath%/}"
 	# Put the cert pem file in keep list
 	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
+		if ! grep "${ssl_capath}" /lib/upgrade/keep.d/icwmp; then
 			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
 		fi
 	fi
 
@@ -469,32 +189,15 @@ validate_defaults() {
 }
 
 boot() {
-	local dhcp_discovery wan_interface skip_dhcp_boot_options disable_gatewayinfo
+	local dhcp_discovery="0"
 
 	config_load cwmp
-	config_get wan_interface cpe default_wan_interface "wan"
-	config_get disable_gatewayinfo cpe disable_gatewayinfo "0"
-
 	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get skip_dhcp_boot_options acs skip_dhcp_boot_options "0"
 
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		if [ "${skip_dhcp_boot_options}" -ne 1 ]; then
-			# Set dhcp option 43 if not already configured
-			enable_dhcp_option43 "${wan_interface}"
-			# Set dhcp option 60
-			set_vendor_id "${wan_interface}"
-		fi
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		if [ "${disable_gatewayinfo}" -ne 1 ]; then
-			# Set dhcp_option 125 if not already configured
-			enable_dhcp_option125 "${wan_interface}"
-			enable_dnsmasq_option125 "${lan_interface}"
-		fi
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		# Set dhcp option 43 if not already configured
+		config_get wan_interface cpe default_wan_interface "wan"
+		enable_dhcp_option43 "${wan_interface}"
 	fi
 	
 	config_get ssl_capath acs ssl_capath
@@ -503,89 +206,82 @@ boot() {
 		regenerate_ssl_link "${ssl_capath}"
 	fi
 
-	# Copy backup data so that if it restart latter on, it gets the info
-	copy_cwmp_etc_files_to_varstate
-	mkdir -p /var/run/icwmpd/
-	touch /var/run/icwmpd/cwmp
-
 	start
 }
 
 start_service() {
-	local enable_cwmp url dhcp_url
+	local enable_cwmp
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
-	config_get url acs url ""
-	config_get dhcp_url acs dhcp_url ""
-
-	procd_open_instance icwmp
 
 	if [ "$enable_cwmp" = "0" ]; then
-		procd_close_instance
 		return 0
 	fi
 
+	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+
 	validate_defaults || {
 		log "Validation of defaults failed"
-		procd_close_instance
 		return 1;
 	}
 
-	if [ -n "${url}" ] || [ -n "${dhcp_url}" ]; then
-		procd_set_param command "$PROG"
-		procd_append_param command -b
-	fi
+	# Copy backup data so that if it restart latter on it gets the info
+	copy_cwmp_etc_files_to_varstate
 
+	procd_open_instance icwmp
+	procd_set_param command "$PROG"
+	procd_append_param command -b
 	procd_set_param respawn \
 		"${respawn_threshold:-5}" \
 		"${respawn_timeout:-10}" "${respawn_retry:-3}"
 
+	procd_set_param watch network.interface
 	procd_close_instance
 }
 
-stop_service()
+service_stopped()
 {
 	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	local ret
-
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
 
-	log "Reload service $ret"
-	ret="0"
 	if [ "$enable_cwmp" = "0" ]; then
 		stop
-		start
 		return 0
 	fi
 
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
-	if [ "$ret" != "true" ]; then
-		log "Reloading cwmp service ..."
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so return
-		log "Skipping ubus reload due to ubus timeout"
-		return 0
-	fi
-
-	status="$(echo "${tr069_status}" | jsonfilter -qe '@.cwmp.status')"
+	status="$(ubus -t 1 call tr069 status |jsonfilter -qe '@.cwmp.status')"
 	if [ "$status" = "up" ]; then
 		ubus -t 1 call tr069 command '{"command":"reload"}'
 	fi
+
+	if [ "$status" = "init" ] || [ "$?" -ne "0" ]; then
+		log "Restarting CWMP client"
+		stop
+		start
+	fi
 }
 
 service_triggers() {
        procd_add_reload_trigger "cwmp"
+
+       procd_open_trigger
+               json_add_array
+                       json_add_string "" "interface.update"
+                       json_add_array
+                               json_add_array
+                                       json_add_string "" "run_script"
+                                       json_add_string "" "/etc/icwmpd/update.sh"
+                               json_close_array
+                       json_close_array
+                       json_add_int "" "2000"
+               json_close_array
+       procd_close_trigger
 }
 

icwmp/files/etc/uci-defaults/95-set-random-inform-time

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_inform_time()
-{
-	local sec inform_time value
-
-	config_load cwmp
-	config_get inform_time acs periodic_inform_time '0001-01-01T00:00:00Z'
-
-	if [ "${inform_time}" == "0001-01-01T00:00:00Z" ]; then
-		sec=$(date +%s)
-		value="$(date -d @$(($sec-$RANDOM)) +%Y-%m-%dT%H:%M:%SZ)"
-
-		uci_set cwmp acs periodic_inform_time "$value"
-	fi
-}
-
-set_inform_time

icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user

@@ -1,139 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-CLASS=""
-OUI=""
-SERIAL=""
-
-get_vivsoi() {
-	# opt125 environment variable has data in below format
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |	 enterprise-number1	  |
-	# |				  |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |   data-len1   |		  |
-	# +-+-+-+-+-+-+-+-+ option-data1  |
-	# /				  /
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-	# |	 enterprise-number2	  |   ^
-	# |				  |   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# |   data-len2   |		  | optional
-	# +-+-+-+-+-+-+-+-+ option-data2  |   |
-	# /				  /   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# ~	       ...		  ~   V
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-
-	#  Enterprise Id  Len  Sub Op  SLen  Data Sub Op  SLen Data	  Sub Op  SLen Data
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-	# |	id    |  n  |	1  |  n1  | D1 |   2  |  n2 | D2 | ... |   6  |  n6 | D6 |
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-
-	local opt125="$1"
-	local len="$2"
-	local ent_id
-
-	#hex-string 2 character=1 Byte
-	# length in hex string will be twice of actual Byte length
-	[ "$len" -gt "8" ] || return
-
-	data="${opt125}"
-	rem_len="${len}"
-	while [ $rem_len -gt 0 ]; do
-		ent_id=${data:0:8}
-		ent_id=$(printf "%d\n" "0x$ent_id")
-
-		if [ $ent_id -ne  3561 ]; then
-			len_val=${data:8:2}
-			data_len=$(printf "%d\n" "0x$len_val")
-			# add 4 byte for ent_id and 1 byte for len
-			data_len=$(( data_len * 2 + 10 ))
-			# move ahead data to next enterprise id
-			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - $data_len ))
-			continue
-		fi
-
-		# read the length of enterprise data
-		len_val=${data:8:2}
-		data_len=$(printf "%d\n" "0x$len_val")
-		# add 4 byte for ent_id and 1 byte for len
-		data_len=$(( data_len * 2 + 10 ))
-
-		opt_len=$(printf "%d\n" "0x$len_val")
-		[ $opt_len -eq 0 ] && return
-
-		# populate the option data of enterprise id
-		sub_data_len=$(( opt_len * 2))
-		# starting 10 means ahead of length field
-		sub_data=${data:10:"${sub_data_len}"}
-
-		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${sub_data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-
-			# get the length of suboption
-			sub_opt_len=${sub_data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:${sub_opt_len}}
-
-			# assign the value found in sub option
-			case "${sub_opt_id}" in
-				"4") OUI=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"5") SERIAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"6") CLASS=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-			esac
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# update the remaining sub option hex string length
-			sub_data_len=$((sub_data_len - sub_opt_end))
-
-			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
-		done
-
-		# move ahead data to next enterprise id
-		data=${data:"${data_len}":"${rem_len}"}
-		rem_len=$(( rem_len - data_len ))
-	done
-}
-
-config_load cwmp
-config_get_bool enable_cwmp cpe enable 1
-config_get wan_intf cpe default_wan_interface "wan"
-
-if [ "$enable_cwmp" = "0" ]; then
-	return 0
-fi
-
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
-	if [ -n "$opt125" ]; then
-		len=$(printf "$opt125"|wc -c)
-		get_vivsoi "$opt125" "$len"
-	fi
-
-	mkdir -p /var/state
-	touch /var/state/icwmp
-	sec=$(uci -q -c /var/state get icwmp.gatewayinfo)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q -c /var/state add icwmp gatewayinfo)
-		uci -q -c /var/state rename icwmp."${sec}"="gatewayinfo"
-	fi
-
-	uci -q -c /var/state set icwmp.gatewayinfo.class="$CLASS"
-	uci -q -c /var/state set icwmp.gatewayinfo.oui="$OUI"
-	uci -q -c /var/state set icwmp.gatewayinfo.serial="$SERIAL"
-	uci -q -c /var/state commit icwmp
-fi

icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user

@@ -1,141 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-DHCP_ACS_URL=""
-DHCP_PROV_CODE=""
-MIN_WAIT_INVL=""
-INVL_MULTIPLIER=""
-
-log() {
-	echo "$@" |logger -t cwmp.update -p info
-}
-
-get_opt43() {
-	# Check if option value is in encapsulated form
-	local opt43="$1"
-	local len="$2"
-
-	[ "$len" -gt "2" ] || return
-
-	first_byte=${opt43:0:2}
-	first_byte=$(printf "%d\n" "0x$first_byte")
-
-	if [ $len -ge 4 ] && [ $first_byte -ge 1 ] && [ $first_byte -le 4 ]; then
-		# it is in encapsulated form
-		# opt43 encapsulated vendor-specific option has data in below format
-		#  Code   Len   Data item        Code   Len   Data item        Code
-		# +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
-		# |  T1 |  n  |  d1 |  d2 | ... |  T2 |  n  |  D1 |  D2 | ... | ... |
-		# +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+
-
-		#hex-string 2 character=1 Byte
-		# length in hex string will be twice of actual Byte length
-
-		data="${opt43}"
-		rem_len="${len}"
-		# parsing of suboption of option 43
-		while [ $rem_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-
-			# get the length of suboption
-			sub_opt_len=${data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${data:4:${sub_opt_len}}
-
-			# assign the value found in sub option
-			case "${sub_opt_id}" in
-				"1") DHCP_ACS_URL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"2") DHCP_PROV_CODE=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"3") MIN_WAIT_INVL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"4") INVL_MULTIPLIER=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-			esac
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# fetch next sub option hex string
-			data=${data:${sub_opt_end}:${len}}
-
-			# update the remaining sub option hex string length
-			rem_len=$((rem_len - sub_opt_end))
-		done
-	else
-		DHCP_ACS_URL=$(echo -n $opt43 | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-	fi
-}
-
-config_load cwmp
-config_get wan_intf cpe default_wan_interface "wan"
-config_get dhcp_discovery acs dhcp_discovery "0"
-config_get dhcp_url acs dhcp_url ""
-config_get min_wait_intvl acs dhcp_retry_min_wait_interval "0"
-config_get intvl_multi acs dhcp_retry_interval_multiplier "0"
-
-config_change=0
-discovery_enable=0
-
-if [ "$dhcp_discovery" = "1" ] || [ "$dhcp_discovery" = "true" ] || [ "$dhcp_discovery" = "enable" ]; then
-	discovery_enable=1
-fi
-
-if [ "$discovery_enable" = "0" ]; then
-	return 0
-fi
-
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
-	if [ -n "$opt43" ]; then
-		len=$(printf "$opt43"|wc -c)
-		get_opt43 "$opt43" "$len"
-	fi
-
-	if [ -z "$DHCP_ACS_URL" ]; then
-		return 0
-	fi
-
-	sec=$(uci -q get cwmp.acs)
-
-	if [ -z "${sec}" ]; then
-		return 0
-	fi
-
-	if [ "${dhcp_url}" != "${DHCP_ACS_URL}" ]; then
-		uci -q set cwmp.acs.dhcp_url="$DHCP_ACS_URL"
-		config_change=1
-	fi
-
-	if [ -n "$MIN_WAIT_INVL" ] && [ "${MIN_WAIT_INVL}" != "${min_wait_intvl}" ]; then
-		uci -q set cwmp.acs.dhcp_retry_min_wait_interval="$MIN_WAIT_INVL"
-		config_change=1
-	fi
-
-	if [ -n "$INVL_MULTIPLIER" ] && [ "${INVL_MULTIPLIER}" != "${intvl_multi}" ]; then
-		uci -q set cwmp.acs.dhcp_retry_interval_multiplier="$INVL_MULTIPLIER"
-		config_change=1
-	fi
-
-	sec=$(uci -q get cwmp.cpe)
-
-	if [ -n "${sec}" ] && [ -n "$DHCP_PROV_CODE" ]; then
-		uci -q set cwmp.cpe.dhcp_provisioning_code="$DHCP_PROV_CODE"
-		config_change=1
-	fi
-
-	if [ $config_change -eq 0 ]; then
-		return 0
-	fi
-
-	# ACS url has been set, inform icwmpd to reload new configuration
-	sleep 10 # wait for some time to avoid interface fluctuation
-
-	ubus call uci commit '{"config":"cwmp"}'
-fi

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
 /var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp

ieee1905/Config.in

@@ -1,6 +1,6 @@
 if (PACKAGE_ieee1905)
 
-menu "Configuration"
+menu "Configurations"
 
 config IEEE1905_EXTENSION_ALLOWED
 	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
@@ -10,17 +10,5 @@ config IEEE1905_PLATFORM_HAS_WIFI
 	bool "Platform has WiFi"
 	default y if PACKAGE_libwifi
 
-config IEEE1905_CMDU_SA_IS_ALMAC
-	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
-	default n
-
-config IEEE1905_WIFI_EASYMESH
-	bool "Include WiFi-Alliance's Easymesh updates"
-	default y
-
-config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
-
 endmenu
-
 endif

ieee1905/Config.map-plugin.in

@@ -0,0 +1,14 @@
+if (PACKAGE_map-plugin)
+
+menu "Configurations"
+
+config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
+	bool "Sync configuration between dynamic controllers in the network"
+	default n
+
+config MULTIAP_FUZZ_1905_CMDUS
+	bool "Include support to fuzz 1905 CMDUs for testing purpose"
+	default n
+
+endmenu
+endif

ieee1905/Makefile

@@ -1,17 +1,17 @@
 #
-# Copyright (C) 2020-2023 IOPSYS Software Solutions AB
+# Copyright (C) 2021-2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.3.4.10
+PKG_VERSION:=4.10.3
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=4231e9496e63fb6d0ab74870c06f9345b001c5bf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/ieee1905.git
+PKG_SOURCE_VERSION:=3781ec6784f4186a6b7e93c83dcccbbf63ebe465
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
@@ -35,21 +35,31 @@ define Package/ieee1905/config
 endef
 
 define Package/libieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=libieee1905.so (library for CMDU and TLV handling)
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= (library for CMDU and TLV handling)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
 	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
 	   +libjson-c +libblobmsg-json +ubus +libpthread \
 	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
 endef
 
-include $(wildcard plugins/*.mk)
+
+define Package/map-plugin
+$(call Package/ieee1905/Default,$(1))
+  TITLE:=Multi-AP (Easymesh) plugin
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/map-plugin/config
+  source "$(SOURCE)/Config.map-plugin.in"
+endef
 
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
@@ -59,15 +69,6 @@ define Package/libieee1905/description
  This package provides library functions for IEEE Std 1905.1 stack.
 endef
 
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugin),map) \
-	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
-	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
-
-
-ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
-
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
@@ -77,26 +78,10 @@ ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
 TARGET_CFLAGS += -DHAS_WIFI
 endif
 
-ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
-TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
+ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
+TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
 endif
 
-ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
-TARGET_CFLAGS += -DWIFI_EASYMESH
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
-TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-endif
-
-ifeq ($(CONFIG_IEEE1905_EXTENSION_ALLOWED),y)
-TARGET_CFLAGS += -DEXTENSION_ALLOWED
-endif
-
-TARGET_CFLAGS += -DHAS_UBUS
-
-MAKE_FLAGS += \
-	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
 
 MAKE_PATH:=src
 
@@ -115,6 +100,25 @@ define Package/libieee1905/install
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 endef
 
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+
 define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
@@ -123,6 +127,7 @@ define Build/InstallDev/libieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
@@ -131,7 +136,7 @@ endef
 
 define Build/InstallDev
 	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
+	$(call Build/InstallDev/map-plugin,$(1),$(2))
 endef
 
 ifeq ($(LOCAL_DEV),1)
@@ -142,4 +147,4 @@ endif
 
 $(eval $(call BuildPackage,ieee1905))
 $(eval $(call BuildPackage,libieee1905))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))
+$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -2,17 +2,13 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	list extmodule 'topology'
-	option registrar '2 5 6'
-	list exclude_tagging '/eth.*'
+	option registrar '2 5'
 #	option macaddress '0a:1b:2c:3d:4e:50'
 
 config al-iface
 	option enabled '1'
-	list ifname 'br-lan'
-	list ifname '/eth.*'
-	list ifname '/wl.*'
-	list ifname '/wds.*'
+	option ifname 'br-lan'
+	option type 'bridge'
 
 # ap sections are auto-generated/overwritten during onboarding
 #
@@ -28,9 +24,3 @@ config ap
 	option encryption 'sae-mixed'
 	option key '1234567890'
 
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-

ieee1905/files/etc/init.d/ieee1905

@@ -1,6 +1,6 @@
 #!/bin/sh /etc/rc.common
 
-START=60
+START=96
 STOP=21
 
 USE_PROCD=1
@@ -42,10 +42,9 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
+			'band:or("2", "5", "60")' \
 			'ssid:string' \
-			'encryption:or("psk2", "sae-mixed", "sae",
-				"psk", "psk-mixed", "none", string)' \
+			'encryption:or("psk2", "sae-mixed", "sae", string)' \
 			'key:string' \
 			'uuid:string' \
 			'manufacturer:string' \
@@ -83,10 +82,8 @@ start_service() {
 	validate_ieee1905_config || return 1;
 
 	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
+        procd_set_param command "/usr/sbin/ieee1905d"
 	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param env IEEE1905_LOG_CMDU=1
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1
 	procd_close_instance

ieee1905/files/etc/uci-defaults/31-ifname-option-to-list

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-config_load ieee1905
-
-ifname_to_list() {
-	local section=$1
-
-	config_get ifname $section ifname	# get list or option as space separated values
-	ifname=${ifname//,/\ }			# convert csv with space separation
-	uci del ieee1905.${section}.ifname	# delete entry
-	for i in ${ifname}; do
-		uci add_list ieee1905.${section}.ifname="$i"	# writeback entry as list
-	done
-}
-
-config_foreach ifname_to_list al-iface

ieee1905/plugins/map.mk

@@ -1,51 +0,0 @@
-define Package/map-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/map-plugin/config
-	if (PACKAGE_map-plugin)
-
-		menu "Configuration"
-
-		config MULTIAP_EASYMESH_VERSION
-		int "Easymesh version"
-		default 4
-
-		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-		bool "Sync configuration between dynamic controllers in the network"
-		default y
-
-		config MULTIAP_FUZZ_1905_CMDUS
-		bool "Include support to fuzz 1905 CMDUs for testing purpose"
-		default n
-
-		endmenu
-	endif
-endef
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
-
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef

ieee1905/plugins/snoop.mk

@@ -1,12 +0,0 @@
-define Package/snoop-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Show all received 1905 CMDUs over UBUS
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/snoop-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
-endef

ieee1905/plugins/topology.mk

@@ -1,12 +0,0 @@
-define Package/topology-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Build full network topology of the 1905 nodes only
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/topology-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
-endef

imonitor/files/etc/init.d/imonitor

@@ -18,7 +18,12 @@ start_service() {
 	procd_close_instance
 }
 
+stop() {
+	service_stop imonitor
+}
+
 reload_service() {
 	stop
 	start
 }
+

inbd/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2016 iopsys
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=inbd
+PKG_VERSION:=1.2.3
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/inbd
+	CATEGORY:=Utilities
+	TITLE:=iopsys Netlink Bridge Daemon
+	URL:=
+	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
+endef
+
+define Package/inbd/description
+	Application handling netlink messages from kernel and sending them out on ubus.
+endef
+
+define Package/inbd/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
+endef
+
+$(eval $(call BuildPackage,inbd))

iop/config

@@ -11,37 +11,15 @@ CONFIG_DEVEL=y
 CONFIG_USE_STRIP=y
 # CONFIG_SIGNED_PACKAGES is not set
 
-CONFIG_JSON_CYCLONEDX_SBOM=y
-CONFIG_INCLUDE_CONFIG=y
-
 # Image #
 CONFIG_TARGET_CUSTOMER="IOPSYS"
 CONFIG_TARGET_ROOTFS_TARGZ=y
 
-# Although UBIFS and EXT4 images work on all non-secure-boot devices,
-# squashfs is the only officially supported rootfs filesystem.
-# A writable rootfs is useful for developping an debugging preinit code.
-# CONFIG_TARGET_ROOTFS_UBIFS is not set
-# CONFIG_TARGET_ROOTFS_EXT4FS is not set
-
 # /etc/banner and /etc/device_info #
 CONFIG_IMAGEOPT=y
 CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="IOPSYS"
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
 CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-CONFIG_VERSION_DIST="IOWRT"
-
-# OpenWrt is given by CONFIG_VERSION_NUMBER which we do not want to override.
-# disabling CONFIG_VERSION_FILENAMES will hide the OpenWrt version from the image filename
-# CONFIG_VERSION_FILENAMES is not set
-
-# CONFIG_VERSION_CODE is set to the IOWRT version instead by the genconfig-script and
-# CONFIG_VERSION_CODE_FILENAMES will put it into the image filename.
-CONFIG_VERSION_CODE_FILENAMES=y
-
-CONFIG_VERSION_HOME_URL="https://iopsys.eu"
-CONFIG_VERSION_BUG_URL="https://iopsys.eu"
-CONFIG_VERSION_SUPPORT_URL="https://iopsys.eu"
 
 # /lib/preinit #
 CONFIG_PREINITOPT=y
@@ -64,46 +42,39 @@ CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
 ################
 
 # EasySoC HAL #
-CONFIG_PACKAGE_qosmngr=y
-CONFIG_PACKAGE_libwifiutils=y
+CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_wifimngr=y
 
 # Multi-AP #
 CONFIG_PACKAGE_ieee1905=y
-CONFIG_IEEE1905_CMDU_SA_IS_ALMAC=y
-CONFIG_PACKAGE_topology-plugin=y
-CONFIG_PACKAGE_decollector=y
-CONFIG_PACKAGE_map-agent=y
-CONFIG_PACKAGE_map-controller=y
+CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_wfadatad-collector=y
 
 # Network #
-CONFIG_PACKAGE_hostmngr=y
 CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_testnet=y
+CONFIG_PACKAGE_owsd=m
 CONFIG_PACKAGE_urlfilter=y
 
 # System #
 CONFIG_PACKAGE_imonitor=m
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_usermngr=y
 
 # TR-x69 #
-CONFIG_PACKAGE_libbbfdm=y
-CONFIG_PACKAGE_bbfdmd=y
-CONFIG_PACKAGE_icwmp=y
+CONFIG_PACKAGE_uspd-mbedtls=y
+CONFIG_PACKAGE_icwmp-mbedtls=y
 CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_stunc=y
-CONFIG_PACKAGE_swmodd=y
-CONFIG_PACKAGE_twamp=y
-CONFIG_PACKAGE_udpecho-client=y
-CONFIG_PACKAGE_udpecho-server=y
-CONFIG_PACKAGE_userinterface=y
-CONFIG_PACKAGE_xmppc=y
-CONFIG_PACKAGE_timemngr=y
-CONFIG_PACKAGE_self-diagnostics=y
+CONFIG_PACKAGE_stunc-mbedtls=m
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_twamp=m
+CONFIG_PACKAGE_udpecho-client=m
+CONFIG_PACKAGE_udpecho-server=m
+CONFIG_PACKAGE_xmppc=m
 
 # WebGUI #
 CONFIG_PACKAGE_sulu=y
@@ -122,8 +93,6 @@ CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set
 CONFIG_PACKAGE_gre=y
 CONFIG_PACKAGE_map=y
 CONFIG_PACKAGE_ntfs-3g=y
@@ -143,11 +112,10 @@ CONFIG_PACKAGE_wwan=y
 CONFIG_PACKAGE_xl2tpd=y
 
 # Services #
-CONFIG_PACKAGE_atftpd=y
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
 CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_dnsmasq=y
-CONFIG_PACKAGE_ssdpd=y
-CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
 CONFIG_PACKAGE_nginx=y
@@ -156,7 +124,7 @@ CONFIG_PACKAGE_openvpn-openssl=y
 CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_PACKAGE_qos-scripts is not set
 CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_vsftpd-tls=y
+CONFIG_PACKAGE_vsftpd-tls=m
 
 # Tools and Utilities #
 CONFIG_PACKAGE_curl=y
@@ -169,21 +137,13 @@ CONFIG_PACKAGE_ip-bridge=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_ip6tables-zz-legacy=y
-CONFIG_PACKAGE_iptables-zz-legacy=y
+CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipmark=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_iptables-mod-nflog=y
-CONFIG_PACKAGE_iptables-mod-nfqueue=y
-CONFIG_PACKAGE_iputils-arping=y
-CONFIG_PACKAGE_iputils-ping=y
 CONFIG_PACKAGE_ndisc6=y
 CONFIG_PACKAGE_rdisc6=y
 CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_socat=y
 CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_traceroute6=y
 
@@ -193,21 +153,15 @@ CONFIG_PACKAGE_traceroute6=y
 ##########
 
 CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_ca-certificates=y
-CONFIG_PACKAGE_crun=y
 CONFIG_PACKAGE_getopt=y
-CONFIG_PACKAGE_gpiod-tools=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libcap-bin=y
 CONFIG_PACKAGE_libustream-openssl=y
 # CONFIG_PACKAGE_libustream-wolfssl is not set
 CONFIG_PACKAGE_lscpu=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_procd-ujail=m
-CONFIG_PACKAGE_quota=y
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rpcd-mod-rrdns=y
@@ -249,10 +203,12 @@ CONFIG_PACKAGE_nginx-mod-luci=y
 
 CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
+CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
 CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
 CONFIG_BUSYBOX_CONFIG_DELUSER=y
+# CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
 CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
 # CONFIG_BUSYBOX_CONFIG_HTTPD is not set
@@ -329,8 +285,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="sha512"
-# CONFIG_BUSYBOX_CONFIG_ARPING is not set
-# CONFIG_BUSYBOX_CONFIG_PING is not set
-# CONFIG_BUSYBOX_CONFIG_PING6 is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_FANCY_PING is not set

iop/scripts/feeds_update.sh

@@ -1,88 +1,58 @@
-#!/bin/bash
+#! /bin/bash
 
 function feeds_update {
-	heads=1
-	developer=0
-	override=1
-	force=1
 
-	function update_failure {
-		if [ $force == 1 ]; then
-			echo "WARNING: Failed to update feed(s). Forced update, proceeding anyway." >&2
-		else
-			echo "ERROR: Failed to update feed(s). Omit -F to proceed anyway." >&2
-			exit 1
-		fi
-	}
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	while getopts "inFh" opt; do
-		case $opt in
-		i)
-			heads=0
-			;;
-		n)
-			override=0
-			;;
-		F)
-			force=0
-			;;
-		h|\?)
-			echo "Usage: ./iop feeds_update [-i] [-n] [-F] [-h]"
-			echo
-			echo "OPTIONS:"
-			echo "  -i - Only update index. Do not change HEAD in feeds."
-			echo "  -n - Do not replace core packages with iopsys versions."
-			echo "  -F - Do not force update if there are inaccessible feeds."
-			echo "  -h - Display this help message and exit."
-			exit 1
-			;;
-		esac
-	done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    cp .config .genconfig_config_bak
 
-	if [ $heads == 1 ]; then
-		if [ $developer == 1 ]; then
-			./scripts/feeds update -g || update_failure
-		else
-			./scripts/feeds update || update_failure
-		fi
-	fi
-	./scripts/feeds update -ai || exit 1
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
+	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
-		./scripts/feeds install -f -p openwrt_core -a || exit 1
-		./scripts/feeds install -f -p qualcomm -a || exit 1
-	fi
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
+		./scripts/feeds install -f -p openwrt_core -a
+    fi
 
-	(
-		echo '# DO NOT EDIT. Autogenerated file by ./iop feeds_update'
-		echo 'FEED_DEVICES_DIRS:='
-		find feeds -type f -name .is-feed-devices-dir -printf 'FEED_DEVICES_DIRS+=$(TOPDIR)/%h\n'
-	) > target/linux/feed-devices/feed-devices-list.mk || exit 1
+    # targets need to be installed explicitly
+    for target in $(ls ./feeds/targets)
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		./scripts/feeds install -f -p targets $target || exit 1
-	done
+    # install all packages
+    ./scripts/feeds install -a
 
-	# install all packages
-	./scripts/feeds install -a || exit 1
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete || exit 1
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	cp .genconfig_config_bak .config
-	make defconfig || exit 1
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap || exit 1
-
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -2,7 +2,6 @@
 
 function genconfig {
 	export CLEAN=0
-	export DIRTY="--dirty"
 	export IMPORT=1
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
@@ -14,13 +13,11 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/x86"
-	armsr_feed="target/linux/feeds/armsr"
-	mediatek_feed="target/linux/feeds/mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
-	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -43,13 +40,19 @@ function genconfig {
 	}
 
 	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    while read -r line
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
 	    do
-		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -70,7 +73,8 @@ function genconfig {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-	    done < .genconfig.config
+		num=$((num+1))
+	    done
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -79,8 +83,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -103,84 +107,63 @@ function genconfig {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armsr_feed/genconfig ] &&
-			armsr=$(cd $armsr_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
-		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
-			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha x86 armsr mediatek ipq95xx ipq53xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
-				a=$(echo "${!list}" | sort)
-				for b in $a; do
+				for b in ${!list}; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $airoha; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
 
-	    for p in $x86; do
+	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
-		    target="x86"
-			target_config_path="$x86_feed/config"
+		    target="iopsys_ramips"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $armsr; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="armsr"
-			target_config_path="$armsr_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
 
-	    for p in $mediatek; do
+	    for p in $iopsys_x86; do
 		if [ $p == $profile ]; then
-		    target="mediatek"
-			target_config_path="$mediatek_feed/config"
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
 		    return
 		fi
 	    done
 
-	    for p in $ipq95xx; do
+	    for p in $iopsys_armvirt; do
 		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $ipq53xx; do
-		if [ $p == $profile ]; then
-		    target="ipq53xx"
-			target_config_path="$qualcomm_ipq53xx_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
 		    return
 		fi
 	    done
@@ -199,7 +182,6 @@ function genconfig {
 		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
 		echo
 		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -D|--no-dirty\t\tIgnore dirty tree"
 		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
 		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
@@ -272,22 +254,11 @@ function genconfig {
 	setup_dirs()
 	{
 		git remote -v | grep -q http || {
-			CUSTBRANCH="$(git rev-parse --abbrev-ref HEAD)"
 			if git ls-remote $CUSTREPO -q 2>/dev/null; then
 				if [ ! -d "$CUSTPATH" ]; then
-					echo "Cloning $CUSTBRANCH branch of $CUSTREPO"
-					git clone -b "$CUSTBRANCH" "$CUSTREPO" "$CUSTPATH" 2>/dev/null || {
-						DEFBRANCH="$(git remote show $CUSTREPO | grep 'HEAD branch' | cut -d' ' -f5)"
-						echo "$CUSTBRANCH branch is not found, cloning $DEFBRANCH branch of $CUSTREPO"
-						git clone "$CUSTREPO" "$CUSTPATH"
-					}
+					git clone "$CUSTREPO" "$CUSTPATH"
 				elif [ $IMPORT -eq 1 ]; then
 					cd $CUSTPATH
-					echo "Checking out $CUSTBRANCH branch in $CUSTPATH"
-					git checkout "$CUSTBRANCH" 2>/dev/null || {
-						DEFBRANCH="$(git symbolic-ref refs/remotes/origin/HEAD | cut -d '/' -f4)"
-						echo "Checking out $CUSTBRANCH branch has failed, using $DEFBRANCH branch in $CUSTPATH"
-					}
 					v "git pull"
 					git pull
 					cd - >/dev/null #go back
@@ -305,24 +276,6 @@ function genconfig {
 		fi
 	}
 
-	get_subtarget_for_device() {
-		readonly target="$1"
-		readonly device="$2"
-		readonly targetinfo_file="tmp/info/.targetinfo-feeds_$target"
-		readonly target_profile_line="Target-Profile: DEVICE_$device"
-		# We want to know after which Target: $target/$subtarget line
-		# our $target_profile_line appears
-		# This is a crude way to "parse" the file using shell 🤯
-		# 1. grep for both lines with line number output
-		# 2. grep again to determine the device profile line that we looked for
-		#    but output one context line before as well to determine corresponding subtarget line
-		# 4. Use head and sed to extract the subtarget
-		grep "^Target: $target/\|^$target_profile_line" "$targetinfo_file" \
-			| grep -E -B1 "^$target_profile_line" \
-			| head -n1 \
-			| sed -E "s|^Target: $target/||"
-	}
-
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
@@ -364,47 +317,21 @@ function genconfig {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
-		# hack to support custom-devices until we have deprecated this genconfig-script...
-		local custom_found=false
-		local used_config_file
 
-		for config_file in feeds/*/devices/$target/config/$BOARDTYPE/config; do
-			if [ "$custom_found" = "true" ]; then
-				echo
-				echo "Error was found!"
-				echo "Please use only one path."
-				echo "Two instances of $target/config/$BOARDTYPE exists:"
-				echo "Path 1: $used_config_file"
-				echo "Path 2: $config_file"
-				return 1
-			fi
-			if [ -f "$config_file" ]; then
-				cat "$config_file" >> .config
-				echo "" >> .config
-				custom_found=true
-				used_config_file=$config_file
-			fi
-		done
-
-		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
-			if [ -z "$subtarget" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
+		# Special handling for targets which use TARGET_DEVICES 
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -431,26 +358,14 @@ function genconfig {
 				fi
 			done
 		fi
-		# Ensure strict file permissions, for when provided through the above
-		if [ -f "$FILEDIR/etc/shadow" ]; then
-			v "chmod 0600 $FILEDIR/etc/shadow"
-			chmod 0600 "$FILEDIR/etc/shadow"
-		fi
-		if [ -d "$FILEDIR/etc/ssl/private" ]; then
-			v "find $FILEDIR/etc/ssl/private -type d -exec chmod 0700 '{}' ';' -o -type f -exec chmod 0600 '{}' ';'"
-			find "$FILEDIR/etc/ssl/private" -type d -exec chmod 0700 '{}' ';' -o -type f -exec chmod 0600 '{}' ';'
-		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always $DIRTY --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected
@@ -497,7 +412,7 @@ function genconfig {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 1
+		exit 0
 	fi
 
 	if [ $# -eq 0 ]; then
@@ -510,7 +425,6 @@ function genconfig {
 			case "$1" in
 
 			-c|--clean) export CLEAN=1;;
-			-D|--no-dirty) export DIRTY="";;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-t|--target) export TARGET="$2"; shift;;
@@ -535,7 +449,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@dev.iopsys.eu:consumer/iopsys.git}"
 
 		setup_dirs
-		create_and_copy_files "$@" || exit 1
+		create_and_copy_files "$@"
 	fi
 }
 

iop/scripts/genconfig_min.sh

@@ -2,7 +2,6 @@
 
 function genconfig_min {
 	export CLEAN=0
-	export DIRTY="--dirty"
 	export SRCTREEOVERR=0
 	export FILEDIR="files/"
 	CURRENT_CONFIG_FILE=".current_config_file"
@@ -13,13 +12,11 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/x86"
-	armsr_feed="target/linux/feeds/armsr"
-	mediatek_feed="target/linux/feeds/mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
-	qualcomm_ipq53xx_feed="target/linux/feeds/ipq53xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -42,13 +39,19 @@ function genconfig_min {
 	}
 
 	function verify_config {
+	    IFS=$'\n'
+	    org=$(<.genconfig.config)
+	    unset IFS
+	    local num
 	    local conf_opt
 	    local conf_org
 	    local conf_new
 
-	    while read -r line
+	    #echo "lines to check $tot_lines"
+	    num=0
+	    for line in $org
 	    do
-		conf_opt=$(echo $line | grep "^[ #]*CONFIG_" | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
+		conf_opt=$(echo $line | grep CONFIG_ | sed 's|.*\(CONFIG_[^ =]*\)[ =].*|\1|')
 		if [ -n "${conf_opt}" ]
 		then
 		    conf_org=$(find_last ${conf_opt} .genconfig.config)
@@ -69,7 +72,8 @@ function genconfig_min {
 			#echo -e "wanted [$conf_org] got [$conf_new]"
 		    fi
 		fi
-	    done < .genconfig.config
+		num=$((num+1))
+	    done
 	}
 
 	# Takes a board name and returns the target name in global var $target
@@ -78,8 +82,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -102,84 +106,63 @@ function genconfig_min {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armsr_feed/genconfig ] &&
-			armsr=$(cd $armsr_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
-		[ -e $qualcomm_ipq53xx_feed/genconfig ] &&
-			ipq53xx=$(cd $qualcomm_ipq53xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha x86 armsr mediatek ipq95xx ipq53xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
-				a=$(echo "${!list}" | sort)
-				for b in $a; do
+				for b in ${!list}; do
 					echo -e "\t$b"
 				done
 			done
 			return
 	    fi
 
-	    for p in $airoha; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
 
-	    for p in $x86; do
+	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
-		    target="x86"
-			target_config_path="$x86_feed/config"
+		    target="iopsys_ramips"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $armsr; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="armsr"
-			target_config_path="$armsr_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
 
-	    for p in $mediatek; do
+	    for p in $iopsys_x86; do
 		if [ $p == $profile ]; then
-		    target="mediatek"
-			target_config_path="$mediatek_feed/config"
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
 		    return
 		fi
 	    done
 
-	    for p in $ipq95xx; do
+	    for p in $iopsys_armvirt; do
 		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $ipq53xx; do
-		if [ $p == $profile ]; then
-		    target="ipq53xx"
-			target_config_path="$qualcomm_ipq53xx_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $brcmbca; do
-		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
 		    return
 		fi
 	    done
@@ -187,6 +170,12 @@ function genconfig_min {
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
 		DEVELOPER=1
+
+		bcmAllowed=0
+		endptAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
 	}
 
 	v() {
@@ -198,7 +187,6 @@ function genconfig_min {
 		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
 		echo
 		echo -e "  -c|--clean\t\tRemove all files under ./files and import from config "
-		echo -e "  -D|--no-dirty\t\tIgnore dirty tree"
 		echo -e "  -v|--verbose\t\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
 		echo -e "  -t|--target\t\tExplicitly specify the linux target to build the board profile from"
@@ -279,24 +267,6 @@ function genconfig_min {
 		fi
 	}
 
-	get_subtarget_for_device() {
-		readonly target="$1"
-		readonly device="$2"
-		readonly targetinfo_file="tmp/info/.targetinfo-feeds_$target"
-		readonly target_profile_line="Target-Profile: DEVICE_$device"
-		# We want to know after which Target: $target/$subtarget line
-		# our $target_profile_line appears
-		# This is a crude way to "parse" the file using shell 🤯
-		# 1. grep for both lines with line number output
-		# 2. grep again to determine the device profile line that we looked for
-		#    but output one context line before as well to determine corresponding subtarget line
-		# 4. Use head and sed to extract the subtarget
-		grep "^Target: $target/\|^$target_profile_line" "$targetinfo_file" \
-			| grep -E -B1 "^$target_profile_line" \
-			| head -n1 \
-			| sed -E "s|^Target: $target/||"
-	}
-
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
@@ -338,47 +308,21 @@ function genconfig_min {
 		    cat $target_config_path/$BOARDTYPE/config >> .config
 		    echo "" >> .config
 		fi
-		# hack to support custom-devices until we have deprecated this genconfig-script...
-		local custom_found=false
-		local used_config_file
-
-		for config_file in feeds/*/devices/$target/config/$BOARDTYPE/config; do
-			if [ "$custom_found" = "true" ]; then
-				echo
-				echo "Error was found!"
-				echo "Please use only one path."
-				echo "Two instances of $target/config/$BOARDTYPE exists:"
-				echo "Path 1: $used_config_file"
-				echo "Path 2: $config_file"
-				return 1
-			fi
-			if [ -f "$config_file" ]; then
-				cat "$config_file" >> .config
-				echo "" >> .config
-				custom_found=true
-				used_config_file=$config_file
-			fi
-		done
 
 		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		airoha | mediatek | brcmbca | ipq95xx | ipq53xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local subtarget="$(get_subtarget_for_device "${target/_/-}" "$BOARDTYPE")"
-			if [ -z "$subtarget" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -405,26 +349,14 @@ function genconfig_min {
 				fi
 			done
 		fi
-		# Ensure strict file permissions, for when provided through the above
-		if [ -f "$FILEDIR/etc/shadow" ]; then
-			v "chmod 0600 $FILEDIR/etc/shadow"
-			chmod 0600 "$FILEDIR/etc/shadow"
-		fi
-		if [ -d "$FILEDIR/etc/ssl/private" ]; then
-			v "find $FILEDIR/etc/ssl/private -type d -exec chmod 0700 '{}' ';' -o -type f -exec chmod 0600 '{}' ';'"
-			find "$FILEDIR/etc/ssl/private" -type d -exec chmod 0700 '{}' ';' -o -type f -exec chmod 0600 '{}' ';'
-		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always $DIRTY --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected
@@ -465,7 +397,7 @@ function genconfig_min {
 	if [ ! -e tmp/.iop_bootstrap ]; then
 		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
 		echo "Run: iop feeds_update"
-		exit 1
+		exit 0
 	fi
 
 	if [ $# -eq 0 ]; then
@@ -478,7 +410,6 @@ function genconfig_min {
 			case "$1" in
 
 			-c|--clean) export CLEAN=1;;
-			-D|--no-dirty) export DIRTY="";;
 			-n|--no-update) export IMPORT=0;;
 			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
 			-t|--target) export TARGET="$2"; shift;;

iop/scripts/generate_tarballs.sh

@@ -0,0 +1,108 @@
+#!/bin/bash
+# shellcheck disable=SC2029
+
+build_bcmkernel_consumer() {
+	local tarfile bcmkernelcommith sdkversion serverpath serverlink
+
+	sdkversion="$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')"
+	sdkversion="${sdkversion:0:4}${sdkversion:(-1)}"
+	bcmkernelcommith="$(grep -w "PKG_SOURCE_VERSION:" "$curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}"*".mk" | cut -d'=' -f2)"
+
+	[ -n "$board" ] && [ -n "$bcmkernelcommith" ] || return
+
+	serverpath="$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz"
+	serverlink="$FPATH/bcmopen-$board-$majver.$minver-latest"
+
+	# do not build bcmopen sdk if it was already built before
+	# if it was, check if there's a symlink in place and create it if missing
+	ssh "$SERVER" "test -f '$serverpath' && { test -L '$serverlink' || ln -sf '$serverpath' '$serverlink'; }" && return
+
+	cd "./build_dir/target-"*"/bcmkernel-"*"-${sdkversion:0:4}"*"/bcm963xx/release"
+	bash do_consumer_release -p "$profile" -y -F
+
+	tarfile='out/bcm963xx_*_consumer.tar.gz'
+	[ $(ls -1 $tarfile | wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
+
+	scp -pv $tarfile "$SERVER":"$serverpath"
+	ssh "$SERVER" "test -f '$serverpath' && ln -sf '$serverpath' '$serverlink'"
+	rm -f $tarfile
+
+	cd "$curdir"
+}
+
+build_endptmngr_consumer() {
+	# create endptmngr open version tar file
+	local endptversion endptcommith
+	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
+	endptversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
+	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
+	[ -n "$profile" ] && [ -n "$endptversion" ] && [ -n "$endptcommith" ] || return
+	ssh $SERVER "test -f $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
+	cd ./build_dir/target-*/endptmngr-$endptversion/
+	mkdir endptmngr-open-$endptversion
+	mkdir endptmngr-open-$endptversion/src
+	cp ./src/endptmngr endptmngr-open-$endptversion/src
+	cp -r ./files/ endptmngr-open-$endptversion/
+	tar -czv  endptmngr-open-$endptversion/ -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
+	scp -pv endptmngr-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
+	cp endptmngr-$profile-$endptversion-$endptcommith.tar.gz $curdir/
+	rm -rf endptmngr-open-$endptversion
+	rm -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
+	cd "$curdir"
+}
+
+function print_usage {
+	echo "Usage: $0 generate_tarballs"
+	echo "  -t <target>"
+}
+
+function generate_tarballs {
+
+    SERVER="god@download.iopsys.eu"
+    FPATH="/var/www/html/iopsys/opensdk"
+
+    set -e
+    git remote -v | grep -q http && return # do not continue if this is an open SDK environment
+
+    board=$(grep CONFIG_TARGET_FAMILY .config | cut -d'=' -f2 | tr -d '"')
+    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
+    majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
+    minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
+    curdir="$PWD"
+
+
+	# Execute user command
+	while getopts "t:h" opt; do
+		case $opt in
+			t)
+				stk_target=${OPTARG}
+				;;
+			h)
+				print_usage
+				exit 1
+				;;
+			\?)
+				print_usage
+				exit 1
+				;;
+		esac
+	done
+
+	if [ -z "$stk_target" ]; then
+		print_usage
+		exit 1
+	fi
+
+	if [ "$stk_target" == "broadcom" ]; then
+		build_bcmkernel_consumer
+		build_endptmngr_consumer
+	else
+		echo "Invalid target: $stk_target"
+		print_usage
+		exit 1
+	fi
+
+}
+
+register_command "generate_tarballs" "Generate tarballs for Open SDK"
+