icwmp: fix calloc

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -0,0 +1,27 @@
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
+	default y
+
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
+config BBF_TR143
+	bool "Enable TR-143 Data Model Support"
+	default y
+
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default y
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default y

bbf/Makefile

@@ -0,0 +1,185 @@
+#
+# Copyright (C) 2022 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.6.36
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=180119192418dbac64713c3e5efe761a1f8e871e
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_FIXUP:=autoreconf
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for libbbfdm API
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+CONFIGURE_ARGS += \
+	--enable-tr181
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CONFIGURE_ARGS += \
+	--enable-tr104
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
+
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-json-plugin
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CONFIGURE_ARGS += \
+	--enable-shared-library
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CONFIGURE_ARGS += --enable-libopenssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CONFIGURE_ARGS += --enable-libwolfssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CONFIGURE_ARGS += --enable-libmbedtls
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+endef
+
+define Package/libbbfdm/default/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+endef
+
+define Package/libbbfdm/default/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
+endef
+
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbfdm/Config_bbfdmd.in

@@ -1,10 +0,0 @@
-if PACKAGE_bbfdmd
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOWRT_EU_"
-
-config BBF_OBFUSCATION_KEY
-	string "Obfuscation key"
-	default "371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04"
-endif

bbfdm/Makefile

@@ -1,217 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbfdm
-PKG_VERSION:=1.16.6.2
-
-USE_LOCAL:=0
-ifneq ($(USE_LOCAL),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bbfdm.git
-PKG_SOURCE_VERSION:=aa480554461c82e6f6f44ee6c23108d3e44fce21
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-include bbfdm.mk
-
-define Package/libbbfdm-api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm-ubus
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel ubus library, provides API to expose datamodel over ubus
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api
-endef
-
-define Package/bbfdmd
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend to expose core tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libopenssl +libbbfdm-ubus +bbf_configmngr
-endef
-
-define Package/dm-service
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Datamodel ubus backend to expose micro-service tree
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbfdm-api +libbbfdm-ubus +bbf_configmngr
-endef
-
-define Package/bbf_configmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:= BBF Config Manager
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json
-endef
-
-define Package/bbfdmd/config
-	source "$(SOURCE)/Config_bbfdmd.in"
-endef
-
-# Below config is a hack to force-recompile dependent micro-services
-define Package/libbbfdm-api/config
-	if PACKAGE_bbfdmd
-		config BBF_LIBBBFDM_VERSION
-			string "Internal config variable to force recompile"
-			default "v${PKG_VERSION}"
-	endif
-endef
-
-define Package/libbbfdm-api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm-ubus/description
- Library contains the APIs to expose data model over ubus
-endef
-
-define Package/bbfdmd/description
- Daemon to expose Datamodel core tree
-endef
-
-define Package/dm-service/description
- Daemon to expose Datamodel micro-service tree
-endef
-
-define Package/bbf_configmngr/description
- Daemon for handling bbf reload services via ubus bbf.config
-endef
-
-ifeq ($(USE_LOCAL),1)
-define Build/Prepare
-	$(CP) ~/git/bbfdm/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBFDMD_MAX_MSG_LEN:Integer=10485760 \
-	-DCMAKE_BUILD_TYPE:String="Debug" \
-
-
-define Package/libbbfdm-api/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/libbbfdm-api.so $(1)/lib/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/libbbfdm-api-v2.so $(1)/lib/
-
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.secure $(1)/usr/libexec/rpcd/bbf.secure
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/libexec/rpcd/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts/
-	$(CP) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_api $(1)/usr/share/bbfdm/scripts/
-
-	$(INSTALL_DIR) $(1)/etc/bbfdm/certificates
-	echo "$(CONFIG_BBF_OBFUSCATION_KEY)" > $(1)/etc/bbfdm/.secure_hash
-endef
-
-define Package/libbbfdm-ubus/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-ubus/libbbfdm-ubus.so $(1)/lib/
-endef
-
-define Package/bbfdmd/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) ./files/etc/config/bbfdm $(1)/etc/config/bbfdm
-	$(INSTALL_CONF) ./files/etc/config/schedules $(1)/etc/config/schedules
-
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbfdmd/ubus/bbfdmd $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/bbfdmd
-
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdmd $(1)/etc/init.d/bbfdmd
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/85-bbfdm-sysctl $(1)/etc/hotplug.d/iface/85-bbfdm-sysctl
-	
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-	
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/etc/uci-defaults/91-fix-bbfdmd-enabled-option $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/ruleng.bbfdm $(1)/etc/uci-defaults
-
-	$(INSTALL_DIR) $(1)/etc/ruleng
-	$(INSTALL_BIN) ./files/etc/ruleng/bbfdm.json $(1)/etc/ruleng
-endef
-
-define Package/dm-service/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/etc/init.d/bbfdm.services $(1)/etc/init.d/
-
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dm-service/dm-service $(1)/usr/sbin/
-
-	$(BBFDM_REGISTER_SERVICES) -v ${CONFIG_BBF_VENDOR_PREFIX} ./bbfdm_service.json $(1) core
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfdm/libcore.so $(1) core
-endef
-
-define Package/bbf_configmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm/scripts
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/bbf_configd $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/bbf_configd
-
-	$(INSTALL_BIN) ./files/etc/init.d/bbf_configd $(1)/etc/init.d/bbf_configd
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/utilities/files/usr/share/bbfdm/scripts/bbf_config_notify.sh $(1)/usr/share/bbfdm/scripts/
-	$(INSTALL_DATA) ./files/etc/bbfdm/critical_services.json $(1)/etc/bbfdm/
-endef
-
-define Package/bbfdmd/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api/legacy
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-api/version-2
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm-ubus
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/*.h $(1)/usr/include/libbbfdm-api/legacy/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/*.h $(1)/usr/include/libbbfdm-api/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/*.h $(1)/usr/include/libbbfdm-api/version-2/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-ubus/bbfdm-ubus.h $(1)/usr/include/libbbfdm-ubus/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/include/*.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/legacy/libbbfdm-api.so $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-api/version-2/libbbfdm-api-v2.so $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm-ubus/libbbfdm-ubus.so $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,bbf_configmngr))
-$(eval $(call BuildPackage,libbbfdm-api))
-$(eval $(call BuildPackage,libbbfdm-ubus))
-$(eval $(call BuildPackage,bbfdmd))
-$(eval $(call BuildPackage,dm-service))

bbfdm/README.md

@@ -1,38 +0,0 @@
-# BBFDM configuration options and utilities
-
-bbfdm provides few compile time configuration options and compile time help utility called [bbfdm.mk](./bbfdm.mk), this document aimed to explain the available usages and best practices.
-
-## Compilation options
-
-|  Configuration option    | Description   | Default Value |
-| -----------------------  | ------------- | ----------- |
-| CONFIG_BBF_VENDOR_LIST   | List of vendor extension directories | iopsys        |
-| CONFIG_BBF_VENDOR_PREFIX | Prefix for Vendor extension datamodel objects/parameters | X_IOPSYS_EU_  |
-| CONFIG_BBF_MAX_OBJECT_INSTANCES | Maximum number of instances per object | 255    |
-| BBF_OBFUSCATION_KEY      | Hash used to encode/decode in `bbf.secure` object | 371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04 |
-
-
-#### BBF_OBFUSCATION_KEY
-
-`bbfdm` provides an ubus object called `bbf.secure` to allow encoding/decoding the values, `bbf.secure` currently support following methods internally to encode/decode
-
-  - Encode/Decode using a predefined SHA512 Hash key
-  - Encode/Decode using a private/public RSA key pair
-
-The `BBF_OBFUSCATION_KEY` compile time configuration option used to defined the SHA512 HASH, if this option is undefined, then it usages a default value as mention in the above table.
-
-User must override this parameter with their own hash value, to generate a hash user can run below command and copy the hash value to this option.
-
-ex: User wants to use 'Sup3rS3cur3Passw0rd' as passkey, then can get the SHA512 sum with
-
-```bash
-$ echo -n "Sup3rS3cur3Passw0rd" | sha512sum
-371d530c95a17d1ca223a29b7a6cdc97e1135c1e0959b51106cca91a0b148b5e42742d372a359760742803f2a44bd88fca67ccdcfaeed26d02ce3b6049cb1e04  -
-```
-
-> Note: Additionally, user can install RSA private key in '/etc/bbfdm/certificates/private_key.pem' path, if private key is present `bbf.secure` shall use rsa private certificate for encrypt/decrypt function. In case of key not present in the pre-defined path, hash will be used for the same.
-
-## Helper utility (bbfdm.mk)
-
-bbfdm provides a helper utility [bbfdm.mk](./bbfdm.mk) to install datamodel plugins in bbfdm core or in microservice directory.
-

bbfdm/bbfdm.mk

@@ -1,92 +0,0 @@
-#
-# Copyright (C) 2023 IOPSYS
-#
-
-BBFDM_BASE_DM_PATH=/usr/share/bbfdm
-BBFDM_INPUT_PATH=/etc/bbfdm/micro_services
-BBFDM_DIR:=$(shell dirname $(realpath $(lastword $(MAKEFILE_LIST))))
-
-PKG_CONFIG_DEPENDS += CONFIG_BBF_LIBBBFDM_VERSION
-#BBFDM_VERSION:=$(shell grep -oP '(?<=^PKG_VERSION:=).*' ${BBFDM_DIR}/Makefile)
-#BBFDM_TOOLS:=$(BUILD_DIR)/bbfdm-$(BBFDM_VERSION)/tools
-
-# Utility to install the plugin in bbfdm core path with priority.
-# Its now possible to overwrite/remove core datamodel with plugin, so, if some
-# datamodel objects/parameters are present in more than one plugin, order in
-# which they loaded into memory becomes crucial, this Utility help to configure
-# a priority order in which they gets loaded in memory.
-#
-# ARGS:
-#  $1 => Plugin artifact
-#  $2 => package install directory
-#  $3 => Priority of the installed plugin (Optional)
-#
-# Note:
-# - Last loaded plugin gets the highest priority
-#
-# Example:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)
-#
-# Example to install plugin with priority:
-#  BBFDM_INSTALL_CORE_PLUGIN ./files/etc/bbfdm/json/CWMPManagementServer.json $(1) 01
-#
-BBFDM_INSTALL_CORE_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -p
-
-
-# Utility to install the micro-service datamodel
-# Use Case:
-# user wants to run a datamodel micro-service, it required to install the
-# DotSO/JSON plugin into a bbf shared directory, this utility helps in
-# installing the DotSO/JSON plugin in bbfdm shared directory, and auto-generate
-# input file for the micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - There could be only one main plugin file, so its bind to PKG_NAME
-# - Micro-service input.json will be auto generated with this call
-#
-# Example:
-#  BBFDM_INSTALL_MS_DM $(PKG_BUILD_DIR)/libcwmp.so $(1) $(PKG_NAME)
-#
-BBFDM_INSTALL_MS_DM:=$(BBFDM_DIR)/tools/bbfdm.sh -m
-
-
-# Utility to install a plugins in datamodel micro-service
-#
-# ARGS:
-#  $1 => DotSo or Json plugin with complete path
-#  $2 => package install directory
-#  $3 => service name
-#
-# Note:
-# - Use the service_name/PKG_NAME of the service in which this has to run
-#
-# Example:
-#  BBFDM_INSTALL_MS_PLUGIN $(PKG_BUILD_DIR)/libxmpp.so $(1) icwmp
-#
-BBFDM_INSTALL_MS_PLUGIN:=$(BBFDM_DIR)/tools/bbfdm.sh -m -p
-
-# Utility to install the helper scripts in default bbfdm script path
-#
-# Use Case:
-# User want to install some script for running diagnostics
-#
-# ARGS:
-#  $1 => Script with complete path
-#  $2 => package install directory
-#
-# Note:
-# - Use with -d option to install script in bbf.diag directory
-#
-# Example:
-#  BBFDM_INSTALL_SCRIPT $(PKG_BUILD_DIR)/download $(1)
-#  BBFDM_INSTALL_SCRIPT -d $(PKG_BUILD_DIR)/ipping $(1)
-#
-BBFDM_INSTALL_SCRIPT:=$(BBFDM_DIR)/tools/bbfdm.sh -s
-
-
-BBFDM_REGISTER_SERVICES:=$(BBFDM_DIR)/tools/bbfdm.sh -t

bbfdm/bbfdm_service.json

@@ -1,54 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "core",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "LANConfigSecurity"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Schedules"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Security",
-        "proto": "cwmp"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "PacketCaptureDiagnostics"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "SelfTestDiagnostics"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Syslog"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "{BBF_VENDOR_PREFIX}OpenVPN",
-        "proto": "usp"
-      },	  
-      {
-        "parent_dm": "Device.",
-        "object": "RootDataModelVersion"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "Reboot()"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "FactoryReset()"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bbfdm/files/etc/bbfdm/critical_services.json

@@ -1,23 +0,0 @@
-{
-	"usp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"time",
-			"wireless",
-			"ieee1905",
-			"mapcontroller",
-			"mosquitto",
-			"nginx",
-			"netmode"
-	],
-	"cwmp": [
-			"firewall",
-			"network",
-			"dhcp",
-			"mapcontroller",
-			"wireless",
-			"time",
-			"netmode"
-	]
-}

bbfdm/files/etc/config/bbfdm

@@ -1,12 +0,0 @@
-config bbfdmd 'bbfdmd'
-	option enable '1'
-	option debug '0'
-	option loglevel '3'
-
-config micro_services 'micro_services'
-	option enable '1'
-	option enable_core '0'
-
-
-config reload_handler 'reload_handler'
-	option log_level '1'

bbfdm/files/etc/config/schedules

@@ -1,2 +0,0 @@
-config global 'global'
-	option enable '1'

bbfdm/files/etc/hotplug.d/iface/85-bbfdm-sysctl

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" ] || exit 0
-
-apply_sysctl_configuration() {
-        local sysctl_conf
-
-        sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-        [ -f "${sysctl_conf}" ] || touch "${sysctl_conf}"
-
-        sysctl -e -p "${sysctl_conf}" >&-
-}
-
-
-ubus -t 10 wait_for network.device
-apply_sysctl_configuration

bbfdm/files/etc/init.d/bbf_configd

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=07
-
-USE_PROCD=1
-PROG=/usr/sbin/bbf_configd
-
-log() {
-	echo "${@}"|logger -t bbf.config -p info
-}
-
-create_needed_directories()
-{
-	mkdir -p /tmp/bbfdm/.cwmp
-	mkdir -p /tmp/bbfdm/.usp
-	mkdir -p /tmp/bbfdm/.bbfdm
-}
-
-start_service()
-{
-	local log_level
-
-	create_needed_directories
-
-	config_load bbfdm
-	config_get log_level "reload_handler" log_level 2
-
-	procd_open_instance "bbf_configd"
-	procd_set_param command ${PROG}
-	procd_append_param command -l "${log_level}"
-	procd_set_param respawn
-	procd_close_instance "bbf_configd"
-}
-
-service_triggers() {
-	for config_file in /etc/config/*; do
-		config_name=$(basename "$config_file")
-		procd_add_config_trigger "config.change" "$config_name" /usr/share/bbfdm/scripts/bbf_config_notify.sh
-	done
-}

bbfdm/files/etc/init.d/bbfdm.services

@@ -1,114 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=60
-STOP=05
-
-USE_PROCD=1
-PROG=/usr/sbin/dm-service
-
-BBFDM_MICROSERVICE_DIR="/etc/bbfdm/services"
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.services -p info
-}
-
-validate_bbfdm_micro_service_section()
-{
-	uci_validate_section bbfdm micro_services "micro_services" \
-		'enable:bool:true' \
-		'enable_core:bool:false'
-}
-
-_add_microservice()
-{
-	local name path loglevel
-	local enable enable_core unified_daemon
-
-	# Check enable from micro-service
-	path="${1}"
-	enable_core="${2}"
-
-	name="$(basename ${path})"
-	name="${name//.json}"
-
-	json_load_file "${path}"
-	json_select daemon
-
-	json_get_var enable enable 1
-	if [ "${enable}" -eq "0" ]; then
-		log "datamodel micro-service ${name} not enabled"
-		return 0
-	fi
-
-	json_get_var unified_daemon unified_daemon 0
-	if [ "${unified_daemon}" -eq "1" ]; then
-		return 0
-	fi
-
-	json_select config
-	json_get_var loglevel loglevel 4
-
-	procd_open_instance "${name}"
-
-	procd_set_param command ${PROG}
-	procd_append_param command -m "${name}"
-	procd_append_param command -l "${loglevel}"
-
-	if [ "${enable_core}" -eq "1" ]; then
-		procd_set_param limits core="unlimited"
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-
-	procd_set_param respawn
-	procd_close_instance "${name}"
-}
-
-configure_bbfdm_micro_services()
-{
-	local enable enable_core
-
-	config_load bbfdm
-	validate_bbfdm_micro_service_section || {
-		log "Validation of micro_service section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq "0" ] && return 0
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		FILES="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/*.json)"
-
-		for file in $FILES;
-		do
-			[ -e "$file" ] || continue
-
-			_add_microservice $file "${enable_core}"
-		done
-	fi
-}
-
-_start_single_service()
-{
-	local service file
-
-	service="${1}"
-
-	if [ -d "${BBFDM_MICROSERVICE_DIR}" ]; then
-		file="$(ls -1 ${BBFDM_MICROSERVICE_DIR}/${service}.json)"
-		[ -e "$file" ] || return
-
-		_add_microservice $file "0"
-	fi
-}
-
-start_service()
-{
-	if [ -n "${1}" ]; then
-		_start_single_service "${1}"
-	else
-		configure_bbfdm_micro_services
-	fi
-}

bbfdm/files/etc/init.d/bbfdmd

@@ -1,56 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=97
-STOP=06
-
-USE_PROCD=1
-PROG=/usr/sbin/bbfdmd
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "${@}"|logger -t bbfdmd.init -p info
-}
-
-validate_bbfdm_bbfdmd_section()
-{
-	uci_validate_section bbfdm bbfdmd "bbfdmd" \
-		'enable:bool:true' \
-		'debug:bool:false' \
-		'loglevel:uinteger:4'
-}
-
-configure_bbfdmd()
-{
-	local enable debug
-	local jlog jrefresh jtimeout jlevel
-
-	config_load bbfdm
-	validate_bbfdm_bbfdmd_section || {
-		log "Validation of bbfdmd section failed"
-		return 1;
-	}
-
-	[ "${enable}" -eq 0 ] && return 0
-
-	procd_set_param command ${PROG}
-	procd_append_param command -l "${loglevel}"
-
-	if [ "${debug}" -eq 1 ]; then
-		procd_set_param stdout 1
-		procd_set_param stderr 1
-	fi
-}
-
-start_service()
-{
-	procd_open_instance "bbfdm"
-	configure_bbfdmd
-	procd_set_param respawn
-	procd_close_instance "bbfdm"
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "bbfdm"
-}

bbfdm/files/etc/ruleng/bbfdm.json

@@ -1,66 +0,0 @@
-{
-	"hosts_refresh": {
-		"if" : [
-			{
-				"event": "host"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.hostmngr",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"dhcp_refresh": {
-		"if_operator": "OR",
-		"if" : [
-			{
-				"event": "host"
-			},
-			{
-				"event": "wifi.dataelements.Associated"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.dhcpmngr",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"ieee1905_refresh_add": {
-		"if" : [
-			{
-				"event": "ieee1905.neighbor.add"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.ieee1905",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	},
-	"ieee1905_refresh_del": {
-		"if" : [
-			{
-				"event": "ieee1905.neighbor.del"
-			}
-		],
-		"then" : [
-			{
-				"object": "bbfdm.ieee1905",
-				"method":"refresh_references_db",
-				"args" : {},
-				"timeout": 1
-			}
-		]
-	}
-}

bbfdm/files/etc/uci-defaults/91-fix-bbfdmd-enabled-option

@@ -1,11 +0,0 @@
-#!/bin/sh
-
-# rename bbfdmd enabled option to enable
-val="$(uci -q get bbfdm.bbfdmd.enabled)"
-if [ -n "${val}" ]; then
-	uci -q set bbfdm.bbfdmd.enabled=""
-	uci -q set bbfdm.bbfdmd.enable="${val}"
-fi
-
-exit 0
-

bbfdm/files/etc/uci-defaults/96-sysctl-translation

@@ -1,58 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-bbfdm_sysctl_conf="/etc/bbfdm/sysctl.conf"
-
-update_device_section() {
-	local section="${1}"
-	local dev_name="${2}"
-	local ipv6="${3}"
-	local name
-
-	# Get name value
-	config_get name "${section}" name
-
-	# Retrun if the name value is different to the dev_name value
-	[ "${name}" != "${dev_name}" ] && return
-	
-	if [ "${ipv6}" = "0" ]; then
-		ipv6="1"
-	else
-		ipv6="0"
-	fi
-
-	# Add ipv6 option
-	uci -q set network.${section}.ipv6="${ipv6}"
-}
-
-parse_bbfdm_sysctl_conf_file() {
-	# Check if the file exists
-	[ -f "${bbfdm_sysctl_conf}" ] || return
-
-	# Create a temporary file
-	tmpfile=$(mktemp)
-
-	# Load network config
-	config_load network
-
-	# Read each line of the file
-	while read -r line; do
-		if echo "$line" | grep -Eq '^net\.ipv6\.conf\.(.+)\.disable_ipv6=([0-1])$'; then
-			name=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=[0-1]$/\1/p')
-			value=$(echo "$line" | sed -n 's/^net\.ipv6\.conf\.\(.*\)\.disable_ipv6=\([0-1]\)$/\2/p')
-
-			config_foreach update_device_section device "${name}" "${value}"
-		else
-			# If the line doesn't match, preserve it in the temporary file
-			echo "$line" >> "$tmpfile"
-		fi
-	done < "${bbfdm_sysctl_conf}"
-
-	# Replace the original file with the modified content
-	mv "$tmpfile" "${bbfdm_sysctl_conf}"
-}
-
-parse_bbfdm_sysctl_conf_file
-
-exit 0

bbfdm/files/etc/uci-defaults/ruleng.bbfdm

@@ -1,2 +0,0 @@
-uci -q set ruleng.bbfdm=rule
-uci -q set ruleng.bbfdm.recipe='/etc/ruleng/bbfdm.json'

bbfdm/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbfdm/tools/bbfdm.sh

@@ -1,203 +0,0 @@
-#!/bin/bash
-
-BBFDM_BASE_DM_PATH="usr/share/bbfdm"
-BBFDM_INPUT_PATH="etc/bbfdm/micro_services"
-INPUT_FILE="0"
-
-MICRO_SERVICE=0
-SCRIPT=0
-DIAG=0
-PLUGIN=0
-DEST=""
-VENDOR_EXTN=""
-TOOLS="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
-SRC=""
-EXTRA_DATA=""
-
-while getopts ":mpsdtv:" opt; do
-	case ${opt} in
-	  m)
-	  	MICRO_SERVICE=1
-		;;
-	  p)
-	  	PLUGIN=1
-		;;
-	  s)
-	  	SCRIPT=1
-		;;
-	  d)
-	  	DIAG=1
-		;;
-	  t)
-	  	INPUT_FILE=1
-		;;
-	  v)
-	  	VENDOR_EXTN=${OPTARG}
-		;;
-	  ?)
-	  	echo "Invalid option: ${OPTARG}"
-		exit 1
-		;;
-	esac
-done
-shift $((OPTIND-1))
-
-SRC="${1}"
-shift
-DEST="${1}"
-shift
-DATA="${1}"
-shift
-EXTRA_DATA="${1}"
-
-
-install_bin() {
-	if ! install -m0755 ${1} ${2}; then
-		echo "Failed to install bin ${1} => ${2}"
-		exit 1
-	fi
-}
-
-install_dir() {
-	if ! install -d -m0755 ${1}; then
-		echo "Failed to create directory ${1}"
-		exit 1
-	fi
-}
-
-install_data() {
-	if ! install -m0644 ${1} ${2}; then
-		echo "Failed to install ${1} => ${2}"
-		exit 1
-	fi
-}
-
-# Installing datamodel
-bbfdm_install_dm()
-{
-	local src dest minfile
-
-	src="$1"
-	dest="$2"
-	minfile=""
-
-	if [ -z ${src} ] || [ -z "${dest}" ] || [ -z "${TOOLS}" ]; then
-		echo "Invalid input option for install dm $@"
-		exit 1
-	fi
-
-	if [ ! -f "${src}" ]; then
-		echo "File $src does not exists..."
-		exit 1
-	fi
-
-	if [ "${src##*.}" = "json" ]; then
-		echo "Compacting BBFDM JSON file"
-		minfile=$(mktemp)
-		jq -c 'del(..|.description?)' ${src} > ${minfile}
-
-		if [ -n "${VENDOR_EXTN}" ]; then
-			sed -i "s/{BBF_VENDOR_PREFIX}/${VENDOR_EXTN}/g" ${minfile}
-		fi
-
-		src=${minfile}
-		if dpkg -s python3-jsonschema >/dev/null 2>&1; then
-			echo "Verifying bbfdm Datamodel JSON file"
-			if ! ${TOOLS}/validate_plugins.py ${src}; then
-				echo "Validation of the plugin failed ${src}"
-				exit 1
-			fi
-		else
-			echo "## Install python3-jsonschema to verify datamodel plugins"
-		fi
-	fi
-
-	install_bin ${src} ${dest}
-
-	if [ -f "${minfile}" ]; then
-		rm ${minfile}
-	fi
-}
-
-if [ -z "$SRC" ] || [ -z "${DEST}" ] ; then
-	echo "# BBFDM Null value in src[${SRC}], dest[${DEST}]"
-	exit 1
-fi
-
-if [ "${SCRIPT}" -eq "1" ]; then
-	if [ "${DIAG}" -eq "1" ]; then
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/bbf_diag/
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/scripts
-		install_bin ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/scripts/
-	fi
-	exit 0
-fi
-
-if [ "${INPUT_FILE}" -eq "1" ]; then
-
-	tempfile=""
-	if [ ! -f "${SRC}" ]; then
-		echo "# Datamodel Input file ${SRC} not available"
-		exit 1
-	fi
-
-	if ! cat ${SRC} |jq >/dev/null 2>&1; then
-		echo "# Invalid datamodel json input file"
-		exit 1
-	fi
-
-	service_name="$(cat ${SRC}|jq -r '.daemon.service_name')"
-	if [ -z "${service_name}" ]; then
-		echo "# service_name not defined in service json ...."
-		exit 1
-	fi
-
-	tempfile=$(mktemp)
-	cp ${SRC} ${tempfile}
-	if [ -n "${VENDOR_EXTN}" ]; then
-		sed -i "s/{BBF_VENDOR_PREFIX}/${VENDOR_EXTN}/g" ${tempfile}
-	fi
-
-	install_dir ${DEST}/etc/bbfdm/services
-	install_data ${tempfile} ${DEST}/etc/bbfdm/services/${service_name}.json
-
-	if [ -f "${tempfile}" ]; then
-		rm ${tempfile}
-	fi
-	exit 0
-fi
-
-if [ "${MICRO_SERVICE}" -eq "1" ]; then
-	if [ -z "${DATA}" ]; then
-		echo "# service_name[${DATA}] not provided"
-		exit 1
-	fi
-
-	if [ "${PLUGIN}" -ne "1" ]; then
-		extn="$(basename ${SRC})"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}.${extn##*.}
-	else
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}
-		bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/${DATA}/$(printf "%02d" ${EXTRA_DATA})$(basename ${SRC})
-	fi
-else
-	if [ "${PLUGIN}" -eq "1" ]; then
-		echo "# WARNING: BBFDM_INSTALL_CORE_PLUGIN macro will be deprecated soon. Please use BBFDM_INSTALL_MS_PLUGIN macro instead, specifying 'core' as micro-service name #"
-		priority="${DATA:-0}"
-		install_dir ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core
-
-		if [ "${priority}" -gt "0" ]; then
-			# install with priority if defined
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core/${priority}_$(basename ${SRC})
-		elif [ "${priority}" -eq "0" ]; then
-			bbfdm_install_dm ${SRC} ${DEST}/${BBFDM_BASE_DM_PATH}/micro_services/core/$(basename ${SRC})
-		else
-			echo "# Priority should be an unsigned integer"
-			exit 1
-		fi
-	fi
-fi
-

bbfdm/tools/validate_plugins.py

@@ -1,333 +0,0 @@
-#!/usr/bin/python3
-
-# Copyright (C) 2024 iopsys Software Solutions AB
-# Author: Amin Ben Romdhane <amin.benromdhane@iopsys.eu>
-
-import sys
-import json
-from jsonschema import validate
-
-JSON_PLUGIN_VERSION = 0
-
-obj_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"cwmp",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-				"uci" : {"type" : "object", "properties" : {
-						"file" : {"type": "string"},
-						"section" : {"type": "object", "properties" : {
-								"type" : {"type": "string"}
-							}
-						},
-						"dmmapfile" : {"type": "string"}
-					}
-				},
-				"ubus" : {"type" : "object", "properties" : {
-						"object" : {"type": "string"},
-						"method" : {"type": "string"},
-						"args" : {"type": "object"},
-						"key" : {"type": "string"}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-obj_schema_v1 = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"object"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"uniqueKeys" : {"type" : "array"},
-		"access" : {"type" : "boolean"},
-		"array" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {
-			"type" : "object", "properties" : {
-				"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"}
-								}
-							},
-							"dmmapfile" : {"type": "string"}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"array",
-		"access"
-	]
-}
-
-param_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"string",
-				"unsignedInt",
-				"unsignedLong",
-				"int",
-				"long",
-				"boolean",
-				"dateTime",
-				"hexBinary",
-				"base64",
-				"decimal"
-			]
-		},
-		"map_type_t": {
-			"type": "string",
-			"enum": [
-				"uci",
-				"ubus",
-				"procfs",
-				"sysfs",
-				"json",
-				"uci_sec"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"cwmp",
-				"usp",
-				"none"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"read" : {"type" : "boolean"},
-		"write" : {"type" : "boolean"},
-		"mapping" : {"type" : "array", "items" : {"type": "object", "properties" : {
-					"type" : {"$ref": "#/definitions/map_type_t"},
-					"uci" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"},
-							"section" : {"type": "object", "properties" : {
-									"type" : {"type": "string"},
-									"index" : {"type": "string"}
-								}
-							},
-							"option" : {"type": "object", "properties" : {
-									"name" : {"type": "string"}								}
-							}
-						}
-					},
-					"ubus" : {"type" : "object", "properties" : {
-							"object" : {"type": "string"},
-							"method" : {"type": "string"},
-							"args" : {"type": "object"},
-							"key" : {"type": "string"}
-						}
-					},
-					"procfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					},
-					"sysfs" : {"type" : "object", "properties" : {
-							"file" : {"type": "string"}
-						}
-					}
-				}
-			}
-		}
-	},
-	"required": [
-		"type",
-		"protocols",
-		"read",
-		"write"
-	]
-}
-
-event_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"event"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"version" : {"type": "string"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}}
-	},
-	"required": [
-		"type",
-		"protocols"
-	]
-}
-
-command_schema = {
-	"definitions": {
-		"type_t": {
-			"type": "string",
-			"enum": [
-				"command"
-			]
-		},
-		"protocols_t": {
-			"type": "string",
-			"enum": [
-				"none",
-				"usp"
-			]
-		}
-	},
-	"type" : "object",
-	"properties" : {
-		"type" : {"$ref": "#/definitions/type_t"},
-		"async" : {"type" : "boolean"},
-		"protocols" : {"type" : "array", "items" : {"$ref": "#/definitions/protocols_t"}},
-		"input" : {"type" : "object"},
-		"output" : {"type" : "object"}
-	},
-	"required": [
-		"type",
-		"async",
-		"protocols"
-	]
-}
-
-def print_validate_json_usage():
-    print("Usage: " + sys.argv[0] + " <dm json file>")
-    print("Examples:")
-    print("  - " + sys.argv[0] + " datamodel.json")
-    print("    ==> Validate the json file")
-    print("")
-    exit(1)
-
-def parse_value( key , value ):
-
-    if key.endswith('.') and not key.startswith('Device.'):
-        print(key + " is not a valid path")
-        exit(1)
-
-    if key.endswith('.') and (JSON_PLUGIN_VERSION == 1 or JSON_PLUGIN_VERSION == 2):
-        __schema = obj_schema_v1
-    elif key.endswith('.'):
-        __schema = obj_schema
-    elif key.endswith('!'):
-        __schema = event_schema
-    elif key.endswith('()'):
-        __schema = command_schema
-    else:
-        __schema = param_schema
-    
-    validate(instance = value, schema = __schema)
-    
-    for k, v in value.items():
-        if k != "list" and k != "mapping" and k != "input" and k != "output" and isinstance(v, dict):
-            parse_value(k, v)
-
-### main ###
-if len(sys.argv) < 2:
-    print_validate_json_usage()
-    
-json_file = open(sys.argv[1], "r", encoding='utf-8')
-try:
-    json_data = json.loads(json_file.read())
-except ValueError:
-    print(sys.argv[1] + " file has a wrong JSON format!!!!!")
-    exit(1)
-
-for __key, __value in json_data.items():
-
-    if __key == "json_plugin_version":
-
-        if not isinstance(__value, int) or __value not in [0, 1, 2]:
-            raise ValueError("Invalid value for json_plugin_version")
-
-        JSON_PLUGIN_VERSION = __value
-        continue
-
-    parse_value(__key , __value)
-
-print("JSON File is Valid")

blkpg-part/Makefile

@@ -1,45 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# Copyright (C) 2025 IOPSYS Software Solutions AB
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=blkpg-part
-PKG_VERSION:=1
-PKG_RELEASE:=1
-PKG_SOURCE_VERSION:=5a4ec5f53ed904b37fba03f3797fbe2af3077f8d
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/gportay/blkpg-part.git
-PKG_MIRROR_HASH:=skip
-
-PKG_MAINTAINER:=Andreas Gnau <andreas.gnau@iopsys.eu>
-PKG_LICENSE:=LGPL-2.1-or-later
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-MAKE_INSTALL_FLAGS += PREFIX=/usr
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=Disc
-  TITLE:=User space partition table and disk geometry handling utility
-  URL:=https://www.portay.io/blkpg-part/
-endef
-
-define Package/$(PKG_NAME)/description
-  blkpg-part creates temporary partitions that are not part of the GPT/MBR.
-  It makes a partition block device from any consecutive blocks that are
-  not partitioned. It creates, resizes and deletes partitions on the fly
-  without writing back the changes to the partition table.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/blkpg-part $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bridgemngr/Config.in

@@ -1,17 +0,0 @@
-if PACKAGE_bridgemngr
-
-config BRIDGEMNGR_BRIDGE_VLAN
-	bool "Use bridge-vlan backend"
-	help
-	   Set this option to use bridge-vlan as backend for VLAN objects.
-
-config BRIDGEMNGR_BRIDGE_VENDOR_EXT
-	bool "Use bridge BBF vendor extensions"
-	default y
-	help
-	   Set this option to use bridge BBF vendor extensions.
-
-config BRIDGEMNGR_BRIDGE_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-endif

bridgemngr/Makefile

@@ -1,75 +0,0 @@
-#
-# Copyright (C) 2020-2024 iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bridgemngr
-PKG_VERSION:=1.0.18.2
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/bridgemngr
-PKG_SOURCE_VERSION:=71ed529be038392071b0399bcfe9d46e89d3cb46
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-define Package/bridgemngr
- CATEGORY:=Utilities
- TITLE:=Bridge Manager
- DEPENDS:=+libuci +libubox +libubus +libblobmsg-json
- DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-endef
-
-define Package/bridgemngr/description
-	Package to add Device.Bridging. data model support.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_PREFIX),"")
-VENDOR_PREFIX = $(CONFIG_BBF_VENDOR_PREFIX)
-else
-VENDOR_PREFIX = $(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_PREFIX)
-endif
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(VENDOR_PREFIX)\\\"
-
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VLAN),y)
-	TARGET_CFLAGS += -DBRIDGE_VLAN_BACKEND
-endif
-
-define Package/bridgemngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libbridgemngr.so $(1) $(PKG_NAME)
-ifeq ($(CONFIG_BRIDGEMNGR_BRIDGE_VENDOR_EXT), y)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/src/libbridgeext.so $(1) $(PKG_NAME) 10
-	$(BBFDM_INSTALL_MS_PLUGIN) -v ${VENDOR_PREFIX} ./files/VLAN_Filtering_Extension.json $(1) $(PKG_NAME) 11
-endif
-
-	$(INSTALL_BIN) ./files/etc/init.d/bridging $(1)/etc/init.d/
-	$(INSTALL_DATA) ./files/etc/config/bridging $(1)/etc/config/
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) ~/git/bridgemngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-$(eval $(call BuildPackage,bridgemngr))

bridgemngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "bridgemngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "Bridging"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bridgemngr/files/VLAN_Filtering_Extension.json

@@ -1,31 +0,0 @@
-{
-	"json_plugin_version": 2,
-	"Device.Bridging.Bridge.{i}.": {
-		"type": "object",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": true,
-		"array": true,
-		"{BBF_VENDOR_PREFIX}VLANFiltering": {
-			"type": "boolean",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"datatype": "boolean",
-			"description": "Enable or disable VLAN Filtering on this bridge.",
-			"mapping": [
-				{
-					"data": "@Parent",
-					"type": "uci_sec",
-					"key": "vlan_filtering"
-				}
-			]
-		}
-	}
-}
-

bridgemngr/files/etc/config/bridging

@@ -1,33 +0,0 @@
-#L2 filter UCI file
-
-config chain 'qos_output'
-	option target 'qos_output'
-	option table 'nat'
-	option chain 'OUTPUT'
-	option policy 'RETURN'
-
-config chain 'dscp2pbits'
-	option target 'dscp2pbits'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-
-config chain 'qos'
-	option target 'qos'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-
-config chain 'prevlanxlate'
-	option target 'prevlanxlate'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-	option append 'false'
-
-config chain 'mcsnooping'
-	option target 'mcsnooping'
-	option table 'broute'
-	option chain 'BROUTING'
-	option policy 'RETURN'
-	option append 'false'

bridgemngr/files/etc/init.d/bridging

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-# Start after bdmf shell, wanconf, and switch-script but before the network-script
-START=20
-STOP=10
-
-USE_PROCD=1
-
-. /lib/functions.sh
-
-handle_ebtables_chain() {
-	local sid="$1"
-	local table
-	local chain
-	local target
-	local policy
-	local append
-	local enabled
-	local ret
-
-	config_get table "$sid" table filter
-	config_get chain "$sid" chain
-	config_get policy "$sid" policy RETURN
-	config_get target "$sid" target
-	config_get_bool append "$sid" append 1
-	config_get_bool enabled "$sid" enabled 1
-
-	[ "$enabled" = "0" ] && return
-	[ -z "${chain}" -o -z "${target}" ] && return
-
-	if [ "$append" != "0" ]; then
-		append="-A"
-	else
-		append="-I"
-	fi
-
-	ebtables --concurrent -t "$table" -N "$target" -P "$policy" 2> /dev/null
-	ret=$?
-
-	if [ $ret -eq 0 ]; then
-		ebtables --concurrent -t "$table" ${append} "$chain" -j "$target"
-	else
-		ebtables --concurrent -t "$table" -D "$chain" -j "$target"
-		ebtables --concurrent -t "$table" ${append} "$chain" -j "$target"
-	fi
-}
-
-handle_ebtables_rule() {
-	local sid="$1"
-	local table
-	local chain
-	local target
-	local match
-	local value
-	local enabled
-	local ret
-
-	config_get table "$sid" table filter
-	config_get chain "$sid" chain
-	config_get match "$sid" match
-	config_get value "$sid" value
-	config_get target "$sid" target RETURN
-	config_get_bool append "$sid" append 1
-	config_get_bool enabled "$sid" enabled 1
-
-	[ "$enabled" = "0" ] && return
-	[ -z "${chain}" -o -z "${target}" ] && return
-
-	if [ "$append" != "0" ]; then
-		append="-A"
-	else
-		append="-I"
-	fi
-
-	ebtables --concurrent -t "$table" -D "$chain" ${match} -j "$target" ${value} 2> /dev/null
-	ebtables --concurrent -t "$table" ${append} "$chain" ${match} -j "$target" ${value}
-}
-
-start_service() {
-	config_load bridging
-	config_foreach handle_ebtables_chain chain
-	config_foreach handle_ebtables_rule rule
-}
-
-reload_service() {
-	stop
-	start
-}
-
-
-service_triggers() {
-	procd_add_reload_trigger bridging
-}

bulkdata/Makefile

@@ -1,40 +1,40 @@
 #
 # Copyright (C) 2022 iopsys Software Solutions AB
 #
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.1.20
+PKG_VERSION:=2.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bbf/bulkdata.git
-PKG_SOURCE_VERSION:=a5e57962938ca143ede65d92be90b6e9fce66e15
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
+PKG_BUILD_DEPENDS:=bbf
 
-define Package/bulkdata
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+ubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus
-endef
-
-define Package/bulkdata/description
-  BulkData daemon for TR069 with bbfdm backend.
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
@@ -47,15 +47,12 @@ define Build/Prepare
 endef
 endif
 
-define Package/bulkdata/install
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DATA) ./files/etc/config/bulkdata $(1)/etc/config/
-	$(INSTALL_BIN) ./files/etc/init.d/bulkdatad $(1)/etc/init.d/
-
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
+	$(CP) ./files/* $(1)/
 endef
 
-$(eval $(call BuildPackage,bulkdata))
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/bbfdm_service.json

@@ -1,17 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "bulkdata",
-    "unified_daemon": true,
-    "proto": "cwmp",
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "BulkData"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,6 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: As per syslog 0-7, default 6=>LOG_INFO
-	option loglevel '3'
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	option log_level '3'
 

bulkdata/files/etc/init.d/bulkdatad

@@ -1,41 +1,34 @@
 #!/bin/sh /etc/rc.common
 
-START=60
+START=99
 STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
-validate_global_section() {
-	uci_validate_section bulkdata bulkdata bulkdata \
-	    'enable:bool:1' \
-	    'loglevel:uinteger:3'
+start_service() {
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
+
+	[ "$enable" != "1" ] && {
+		return 0
+	}
+
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn "3" "7" "0"
+	procd_close_instance
 }
 
-start_service() {
-	local enable loglevel
-
-	validate_global_section
-
-	procd_open_instance "bulkdata"
-	procd_set_param command "$PROG"
-	procd_append_param command -l ${loglevel}
-	procd_set_param respawn
-	procd_close_instance "bulkdata"
+boot() {
+	start
 }
 
 reload_service() {
-	ret=$(ubus call service list '{"name":"bulkdatad"}' | jsonfilter -qe '@.bulkdatad.instances.bulkdata.running')
-	if [ "$ret" != "true" ]; then
-		stop
-		start
-	else
-		ubus send bulkdata.reload
-	fi
-
-	return 0
+	stop
+	start 
 }
 
-service_triggers() {
+service_triggers()
+{
 	procd_add_reload_trigger bulkdata
 }

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata.${section}.profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

capiagent/files/etc/init.d/capiagent

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=20
-
-USE_PROCD=1
-
-start_service() {
-	if [ -e "/etc/config/mapagent" -o -e "/etc/config/mapcontroller" ]; then
-		config_load mapagent
-		config_get_bool agent_enabled agent enabled 1
-		config_load mapcontroller
-		config_get_bool controller_enabled controller enabled 1
-
-		if [ $agent_enabled -eq 1 -o $controller_enabled -eq 1 ]; then
-			procd_open_instance
-			procd_set_param command "/usr/sbin/capiagent" "-p 9000"
-			procd_set_param limits core="unlimited"
-			#procd_set_param respawn
-			#procd_set_param stdout 1
-			#procd_set_param stderr 1
-			procd_close_instance
-		fi
-	fi
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "capiagent"
-}
-
-reload_service() {
-	stop
-	start
-}

cmph/Makefile

@@ -1,52 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=cmph
-PKG_VERSION:=2.0.2
-PKG_RELEASE:=1
-
-PKG_SOURCE:=cmph-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=@SF/cmph/
-PKG_MD5SUM:=51ec5329b47774d251a96eaaafdb409e
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-PKG_FIXUP:=autoreconf
-
-PKG_LICENSE:=LGPLv2
-PKG_LICENSE_FILES:=LGPL-2
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=C Minimal Perfect Hashing library
-  URL:=https://sourceforge.net/projects/cmph/
-endef
-
-define Package/$(PKG_NAME)/description
-  C Minimal Perfect Hashing (CMPH) library allows the creation of minimal perfect hash functions for large data sets.
-endef
-
-define Build/Configure
-	$(call Build/Configure/Default)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph_time.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/cmph_types.h $(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.a $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.so* $(1)/usr/lib/
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/src/.libs/libcmph.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
-

csmngr/Makefile

@@ -1,64 +0,0 @@
-#
-# Copyright (C) 2020-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=csmngr
-PKG_VERSION:=1.0.2
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5e50fe388fff29b08d895c1c580152cccfa290ad
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/csmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_CONFIG_DEPENDS := \
-		     CONFIG_PACKAGE_libwifiutils \
-		     CONFIG_PACKAGE_libwifi
-
-PKG_BUILD_DEPENDS := libwifi
-
-include $(INCLUDE_DIR)/package.mk
-
-
-MAKE_PATH:=src
-
-define Package/csmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi channel selection manager
-  DEPENDS:=+libwifiutils +libwifi +libuci +libubox +ubus +libnl-genl
-endef
-
-define Package/csmngr/description
- WiFi Auto Channel Selection manager.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/csmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/csmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/csmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,csmngr))

ddnsmngr/Config.in

@@ -1,16 +0,0 @@
-if PACKAGE_ddnsmngr
-choice
-	prompt "Select backend for dynamic DNS management"
-	default DDNSMNGR_BACKEND_DDNSSCRIPT
-	depends on PACKAGE_ddnsmngr
-	help
-		Select which package to use for dynamic DNS support
-
-config DDNSMNGR_BACKEND_DDNSSCRIPT
-	bool "Use ddns_script"
-
-config DDNSMNGR_BACKEND_INADYN
-	bool "Use inadyn"
-
-endchoice
-endif

ddnsmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ddnsmngr
-PKG_VERSION:=1.0.12
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ddnsmngr.git
-PKG_SOURCE_VERSION:=44af9a7b3fec3929f8554af9633a5b8068189b48
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-PKG_CONFIG_DEPENDS:=CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT CONFIG_DDNSMNGR_BACKEND_INADYN
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Dynamic DNS manager
-  DEPENDS:=+DDNSMNGR_BACKEND_DDNSSCRIPT:ddns-scripts +DDNSMNGR_BACKEND_INADYN:inadyn
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  MENU:=1
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-MAKE_PATH:=src
-
-define Package/$(PKG_NAME)/description
-	Manage dynamic DNS updation and provides Device.DynamicDNS. datamodel object based on TR181-2.16
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/ddnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/ddns
-	$(INSTALL_DIR) $(1)/etc/ddnsmngr/servers
-	$(INSTALL_DIR) $(1)/usr/lib/ddnsmngr
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DATA) ./files/etc/config/ddnsmngr $(1)/etc/config/ddnsmngr
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-ddns-config-migrate $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/init.d/ddnsmngr $(1)/etc/init.d/ddnsmngr
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_DDNSSCRIPT),y)
-	$(INSTALL_BIN) ./files/usr/lib/ddns_script/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/lib/ddnsmngr/ddnsmngr_updater.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/ddns-script/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/ddns-script/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-ifeq ($(CONFIG_DDNSMNGR_BACKEND_INADYN),y)
-	$(INSTALL_BIN) ./files/usr/lib/inadyn/ddnsmngr_service.sh $(1)/usr/lib/ddnsmngr/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/files/inadyn/server/* $(1)/etc/ddnsmngr/servers
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/inadyn/usr/libexec/rpcd/ddnsmngr $(1)/usr/libexec/rpcd/ddnsmngr
-endif
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libddnsmngr.so $(1) $(PKG_NAME)
-endef
-
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

ddnsmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "ddnsmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DynamicDNS"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

ddnsmngr/files/etc/config/ddnsmngr

@@ -1,23 +0,0 @@
-config ddnsmngr 'global'
-	option configfile '/var/run/ddnsmngr/ddnsmngr.json'
-	option ddns_dateformat '%F %R'
-	option ddns_rundir '/var/run/ddnsmngr'
-	option ddns_logdir '/var/log/ddnsmngr'
-	option ddns_loglines '250'
-	option upd_privateip '0'
-	option use_curl '1'
-
-config server 'ddns_server_1'
-	option enabled '1'
-	option service 'dynu.com'
-	option name 'dynu.com'
-
-config server 'ddns_server_2'
-	option enabled '1'
-	option service 'dyndns.org'
-	option name 'dyndns.org'
-
-config server 'ddns_server_3'
-	option enabled '1'
-	option service 'zoneedit.com'
-	option name 'zoneedit.com'

ddnsmngr/files/etc/init.d/ddnsmngr

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=10
-USE_PROCD=1
-
-. /usr/lib/ddnsmngr/ddnsmngr_service.sh
-
-start_service() {
-	start_ddnsmngr_service
-}
-
-stop_service() {
-	stop_ddnsmngr_service
-}
-
-reload_service() {
-	stop
-	sleep 1
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger ddnsmngr
-	add_ddnsmngr_triggers
-}

ddnsmngr/files/etc/uci-defaults/01-ddns-config-migrate

@@ -1,170 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-cl_id=1
-srv_id=1
-
-function get_ddns_config_option() {
-	local val
-
-	val="$(uci -q get ddns.${1}.${2})"
-
-	if [ -z "${val}" ] && [ -n "${3}" ]; then
-		val="${3}"
-	fi
-
-	echo "${val}"
-}
-
-function config_supported_service() {
-	if ! uci -q get ddnsmngr.global >/dev/null 2>&1; then
-		uci -q set ddnsmngr.global="ddnsmngr"
-	fi
-
-	servers=""
-
-	for i in $(find /etc/ddnsmngr/servers/ -name '*.json' | cut -d'/' -f 5 | sed "s/.json//")
-	do
-		if [ -z "${servers}" ]; then
-			servers="${i}"
-		else
-			servers="${servers},${i}"
-		fi
-	done
-
-	uci -q set ddnsmngr.global.supported_services="${servers}"
-}
-
-function migrate_service_section() {
-	client_sec=""
-	enabled="$(get_ddns_config_option ${1} enabled "0")"
-	service_name="$(get_ddns_config_option ${1} service_name)"
-	interface="$(get_ddns_config_option ${1} interface)"
-	ip_network="$(get_ddns_config_option ${1} ip_network)"
-	username="$(get_ddns_config_option ${1} username)"
-	password="$(get_ddns_config_option ${1} password)"
-	lookup_host="$(get_ddns_config_option ${1} lookup_host)"
-	use_ipv6="$(get_ddns_config_option ${1} use_ipv6 "0")"
-	force_ipversion="$(get_ddns_config_option ${1} force_ipversion "0")"
-	use_https="$(get_ddns_config_option ${1} use_https "0")"
-	force_dnstcp="$(get_ddns_config_option ${1} force_dnstcp "0")"
-
-	if [ -z "${service_name}" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# check server file is present in device
-	if [ ! -f "/etc/ddnsmngr/servers/${service_name}.json" ]; then
-		uci -q delete ddns."${1}"
-		return 0
-	fi
-
-	# Check if client section is already added for this service
-	clients=$(uci -q show ddnsmngr | grep "=client")
-	client_count=$(echo "${clients}" | wc -l)
-
-	tmp=0
-	while [ $tmp -lt $client_count ]
-	do
-		mngr_serv="$(uci -q get ddnsmngr.@client[$tmp].service_name)"
-		mngr_intf="$(uci -q get ddnsmngr.@client[$tmp].interface)"
-		mngr_netw="$(uci -q get ddnsmngr.@client[$tmp].ip_network)"
-		mngr_user="$(uci -q get ddnsmngr.@client[$tmp].username)"
-		mngr_ipv6="$(uci -q get ddnsmngr.@client[$tmp].use_ipv6)"
-		mngr_forceip="$(uci -q get ddnsmngr.@client[$tmp].force_ipversion)"
-		mngr_https="$(uci -q get ddnsmngr.@client[$tmp].use_https)"
-		mngr_dnstcp="$(uci -q get ddnsmngr.@client[$tmp].force_dnstcp)"
-
-		[ -z "${mngr_ipv6}" ] && mngr_ipv6="0"
-		[ -z "${mngr_forceip}" ] && mngr_forceip="0"
-		[ -z "${mngr_https}" ] && mngr_https="0"
-		[ -z "${mngr_dnstcp}" ] && mngr_dnstcp="0"
-
-		if [ "${mngr_serv}" == "${service_name}" ] && [ "${mngr_intf}" == "${interface}" ] && \
-		   [ "${mngr_netw}" == "${ip_network}" ] && [ "${mngr_user}" == "${username}" ] && \
-		   [ "${mngr_ipv6}" == "${use_ipv6}" ] && [ "${mngr_forceip}" == "${force_ipversion}" ] && \
-		   [ "${mngr_https}" == "${use_https}" ] && [ "${mngr_dnstcp}" == "${force_dnstcp}" ]; then
-			break
-		fi
-
-		tmp=$(( tmp + 1 ))
-	done
-
-	if [ $tmp -ne $client_count ]; then
-		i=0
-		for client in $clients; do
-			if [ $i -eq $tmp ]; then
-				client_sec="$(echo $client | cut -d'=' -f 1 | cut -d'.' -f 2)"
-				break
-			fi
-			i=$(( i + 1 ))
-		done
-
-		if [ $enabled -eq 1 ]; then
-			uci -q set ddnsmngr."${client_sec}".enabled="1"
-		fi
-	else
-		client_sec=ddns_mig_client_"${cl_id}"
-
-		uci -q set ddnsmngr."${client_sec}"="client"
-		uci -q set ddnsmngr."${client_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${client_sec}".service_name="${service_name}"
-		uci -q set ddnsmngr."${client_sec}".interface="${interface}"
-		uci -q set ddnsmngr."${client_sec}".ip_network="${ip_network}"
-		uci -q set ddnsmngr."${client_sec}".username="${username}"
-		uci -q set ddnsmngr."${client_sec}".password="${password}"
-		uci -q set ddnsmngr."${client_sec}".use_ipv6="${use_ipv6}"
-		uci -q set ddnsmngr."${client_sec}".force_ipversion="${force_ipversion}"
-		uci -q set ddnsmngr."${client_sec}".use_https="${use_https}"
-		uci -q set ddnsmngr."${client_sec}".force_dnstcp="${force_dnstcp}"
-
-		cl_id=$(( cl_id + 1 ))
-
-		# add server section if not added
-		servers=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'")
-		if [ -z "${servers}" ]; then
-			server_sec=ddns_mig_server_"${srv_id}"
-			uci -q set ddnsmngr."${server_sec}"="server"
-			uci -q set ddnsmngr."${server_sec}".enabled="1"
-			uci -q set ddnsmngr."${server_sec}".service="${service_name}"
-			uci -q set ddnsmngr."${server_sec}".name="${service_name}"
-
-			srv_id=$(( srv_id + 1 ))
-		fi
-	fi
-
-
-	# if lookup_host is set then add host section
-	if [ -n "${lookup_host}" ] && [ -n "${client_sec}" ]; then
-		# check number of hosts present for this client
-		host_count=$(uci -q show ddnsmngr | grep "dm_parent=\'${client_sec}\'" | wc -l)
-		host_ix=$(( host_count + 1 ))
-		host_sec="${client_sec}"_host_"${host_ix}"
-
-		uci -q set ddnsmngr."${host_sec}"="host"
-		uci -q set ddnsmngr."${host_sec}".enabled="${enabled}"
-		uci -q set ddnsmngr."${host_sec}".lookup_host="${lookup_host}"
-		uci -q set ddnsmngr."${host_sec}".dm_parent="${client_sec}"
-	fi
-
-	uci -q delete ddns."${1}"
-}
-
-function migrate_ddns_config() {
-	if [ ! -f "/etc/config/ddnsmngr" ]; then
-		# Create ddnsmngr config file
-		touch /etc/config/ddnsmngr
-	fi
-
-	config_supported_service
-
-	config_load ddns
-	config_foreach migrate_service_section service
-
-	uci -q commit ddns
-	uci -q commit ddnsmngr
-}
-
-migrate_ddns_config

ddnsmngr/files/usr/lib/ddns_script/ddnsmngr_service.sh

@@ -1,169 +0,0 @@
-#! /bin/sh
-
-RUNDIR="/var/run/ddnsmngr"
-LOGDIR="/var/log/ddnsmngr"
-PROG="/usr/lib/ddnsmngr/ddnsmngr_updater.sh"
-CONFIGFILE="/var/run/ddnsmngr/ddnsmngr.json"
-CLIENT_INTFS=""
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion proc_info_file
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return 0
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return 0
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return 0 
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return 0
-	fi
-
-	service_section=$(uci -q show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return 0
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return 0
-	fi
-
-	json_add_object
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "proc_info_file" "${1}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_close_object
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return 0
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	run_dir=$(uci -q get ddnsmngr.global.ddns_rundir)
-	log_dir=$(uci -q get ddnsmngr.global.ddns_logdir)
-
-	if [ -n "${run_dir}" ]; then
-		RUNDIR="${run_dir}"
-	fi
-
-	if [ -n "${log_dir}" ]; then
-		LOGDIR="${log_dir}"
-	fi
-
-	mkdir -p "${RUNDIR}"
-	mkdir -p "${LOGDIR}"
-
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	touch "${CONFIGFILE}"
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "Can not create ${CONFIGFILE}, exit"
-		exit 0
-	fi
-
-	json_init
-	json_add_array "services"
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	json_close_array
-	json_dump > "${CONFIGFILE}"
-
-	procd_open_instance ddnsmngr
-	procd_set_param command "$PROG"
-	procd_append_param command -c "${CONFIGFILE}"
-	procd_append_param command -- start
-	procd_close_instance
-}
-
-stop_ddnsmngr_service() {
-	conf_file=$(uci -q get ddnsmngr.global.configfile)
-	if [ -n "${conf_file}" ]; then
-		CONFIGFILE="${conf_file}"
-	fi
-
-	if [ ! -f "${CONFIGFILE}" ]; then
-		log "${CONFIGFILE} not found, can't stop services if running any"
-	fi
-
-	"$PROG" -c "${CONFIGFILE}" -- stop
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-		procd_add_interface_trigger "interface.*.down" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

ddnsmngr/files/usr/lib/inadyn/ddnsmngr_service.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-PROG="/usr/sbin/inadyn"
-CONFIGPATH="/tmp/inadyn_config"
-PIDPATH="/etc/inadyn_pid"
-CLIENT_INTFS=""
-CONFIG_FILES=""
-SERVER_PATH="/etc/ddnsmngr/servers"
-
-FORMAT="custom [SECTION] {\n\tusername\t= [USER]\n\tpassword\t= [PWD]\n\tddns-server\t= [SERV]\n\tddns-path\t= [URI]\n\tssl\t\t= [SSL]\n\thostname\t= [NAME]\n\tcheckip-command\t= [CMD]\n\tddns-response\t= [RESPONSES]\n}"
-
-
-. /usr/share/libubox/jshn.sh
-
-log() {
-	echo "$*"|logger -t ddnsmngr.init -p debug
-}
-
-get_service_data() {
-	local provider="$1"
-	shift
-	local dir="$1"
-	shift
-	local ipv6="$1"
-	shift
-
-	local name data url answer script
-
-	[ $# -ne 2 ] && {
-		return 1
-	}
-
-	[ -f "${dir}/${provider}.json" ] || {
-		eval "$1=\"\""
-		eval "$2=\"\""
-		return 1
-	}
-
-	json_load_file "${dir}/${provider}.json"
-	json_get_var name "name"
-	if [ "$ipv6" -eq "1" ]; then
-		json_select "ipv6"
-	else
-		json_select "ipv4"
-	fi
-	json_get_var data "url"
-	json_get_var answer "answer"
-	json_select ".."
-	json_cleanup
-
-	response=""
-	if [ -n "${answer}" ]; then
-		answer=$(echo "${answer}" | sed 's/|/ /g')
-		for ans in $answer; do
-			if [ -z "${response}" ]; then
-				response="${ans}"
-			else
-				response="${response}, ${ans}"
-			fi
-		done
-		response="{ ${response} }"
-	fi
-
-	eval "$1=\"$data\""
-	eval "$2=\"$response\""
-
-	return 0
-}
-
-generate_inadyn_config() {
-	json_load "${1}"
-	json_get_var service_name service_name
-	json_get_var use_ipv6 use_ipv6
-	json_get_var interface interface
-	json_get_var username username
-	json_get_var password password
-	json_get_var host lookup_host
-	json_get_var conf_file config_file
-	json_get_var conf_dir config_dir
-	json_get_var server_address server_address
-	json_cleanup
-
-	if [ -z "${service_name}" ] || [ -z "${host}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_file}" ]; then
-		return 1
-	fi
-
-	if [ -z "${conf_dir}" ]; then
-		return 1
-	fi
-
-	# First look into custom path to load the url otherwise default path
-	get_service_data "${service_name}" "${SERVER_PATH}" "${use_ipv6}" server_url server_answer
-
-	if [ -z "${server_url}" ]; then
-		return 1
-	fi
-
-	# Need to pick proto, server address and request uri separately from the url
-	# format http://[server_address]/[update_Request_uri]
-	proto=$(echo $server_url | cut -d':' -f 1)
-	serv=$(echo $server_url | cut -d'/' -f 3 | cut -d'@' -f 2)
-	uri=${server_url#*$serv}
-
-	if [ -z $proto ] || [ -z $serv ] || [ -z $uri ]; then
-		return 1
-	fi
-
-	path=$(echo "$uri" | sed 's/&/\\&/g')
-	update_uri=$(echo $path | sed -e "s#\[DOMAIN\]#%h#g"	-e "s#\[PASSWORD\]#%p#g" \
-				      -e "s#\[USERNAME\]#%u#g"	-e "s#\[IP\]#%i#g")
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	# now get the physical interface name
-	intf=$(ifstatus "${interface}" | jsonfilter -e '@.device')
-	if [ -z "${intf}" ]; then
-		return 1
-	fi
-
-	# command to get ip of the interface
-	if [ "${use_ipv6}" -eq 0 ]; then
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv4-address\\\\\"][0].address'\""
-	else
-		get_ip="\"ifstatus ${interface} | jsonfilter -e '@[\\\\\"ipv6-address\\\\\"][0].address'\""
-	fi
-
-	if [ "${proto}" = "http" ]; then
-		ssl="false"
-	else
-		ssl="true"
-	fi
-
-	inadyn_ver=$(inadyn -v)
-	user_agent="inadyn/${inadyn_ver}"
-
-	config_file="${conf_dir}/${conf_file}"
-	touch "${config_file}"
-
-	echo "iface = ${intf}" > "${config_file}"
-	echo "period = 600" >> "${config_file}"
-	echo "user-agent = ${user_agent}" >> "${config_file}"
-
-	if [ "${use_ipv6}" -eq 1 ]; then
-		echo "allow-ipv6 = true" >> "${config_file}"
-	fi
-
-	if [ -z "${password}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tpassword\\t= \[PWD\]\\n//g')
-	fi
-
-	if [ -z "${server_answer}" ]; then
-		FORMAT=$(echo "${FORMAT}" | sed 's/\\tddns-response\\t= \[RESPONSES\]\\n//g')
-	fi
-
-	config=$(echo $FORMAT | sed -e "s#\[SECTION\]#$conf_file#g"	-e "s#\[PWD\]#$password#g" \
-				    -e "s#\[USER\]#$username#g"	-e "s#\[SERV\]#$serv#g" \
-				    -e "s#\[URI\]#\"$update_uri\"#g"	-e "s#\[SSL\]#$ssl#g" \
-				    -e "s#\[NAME\]#$host#g"	-e "s#\[CMD\]#$get_ip#g" \
-				    -e "s#\[RESPONSES\]#$server_answer#g")
-
-	echo -e "\n\n${config}" >> "${config_file}"
-
-	return 0
-}
-
-validate_host_section() {
-	uci_validate_section ddnsmngr host "${1}" \
-		'enabled:bool:0' \
-		'lookup_host:string' \
-		'dm_parent:string'
-}
-
-validate_client_section() {
-	uci_validate_section ddnsmngr client "${1}" \
-		'enabled:bool:0' \
-		'service_name:string' \
-		'interface:string' \
-		'ip_network:string' \
-		'username:string' \
-		'password:string' \
-		'use_https:bool:0' \
-		'force_dnstcp:bool:0' \
-		'use_ipv6:bool:0' \
-		'force_ipversion:bool:0'
-}
-
-add_object() {
-	local enabled lookup_host dm_parent use_ipv6 force_ipversion
-	local service_name interface ip_network username password use_https force_dnstcp
-
-	validate_host_section "${1}" || {
-		log "Validation of host section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ] || [ -z "${dm_parent}" ]; then
-		return
-	fi
-
-	validate_client_section "${dm_parent}" || {
-		log "Validation of client section failed"
-		return
-	}
-
-	if [ "${enabled}" -ne 1 ]; then
-		return
-	fi
-
-	service_name=$(uci -q get ddnsmngr.${dm_parent}.service_name)
-	if [ -z "${service_name}" ]; then
-		return
-	fi
-
-	service_section=$(uci show ddnsmngr | grep "service=\'${service_name}\'" | cut -d'.' -f 2 | head -1)
-	if [ -z "${service_section}" ]; then
-		return
-	fi
-
-	service_enabled=$(uci -q get ddnsmngr.${service_section}.enabled)
-	if [ "${service_enabled}" -ne 1 ]; then
-		return
-	fi
-
-	json_init
-	json_add_string "interface" "${interface}"
-	json_add_string "service_name" "${service_name}"
-	json_add_string "username" "${username}"
-	json_add_string "password" "${password}"
-	json_add_string "lookup_host" "${lookup_host}"
-	json_add_string "ip_network" "${ip_network}"
-	json_add_string "use_ipv6" "${use_ipv6}"
-	json_add_string "force_ipversion" "${force_ipversion}"
-	json_add_string "use_https" "${use_https}"
-	json_add_string "force_dnstcp" "${force_dnstcp}"
-	json_add_string "config_file" "${1}"
-	json_add_string "config_dir" "${CONFIGPATH}"
-
-	json_str=$(json_dump)
-	json_cleanup
-
-	generate_inadyn_config "${json_str}"
-
-	if [ "$?" -ne 0 ]; then
-		return
-	fi
-
-	CONFIG_FILES="${CONFIG_FILES} ${1}"
-
-	if [ -z "${interface}" ]; then
-		if [ "${use_ipv6}" -eq 0 ]; then
-			interface="wan"
-		else
-			interface="wan6"
-		fi
-	fi
-
-	for intf in $CLIENT_INTFS; do
-		if [ "${intf}" == "${interface}" ]; then
-			return
-		fi
-	done
-
-	CLIENT_INTFS="${CLIENT_INTFS} ${interface}"
-}
-
-start_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	mkdir $CONFIGPATH
-	mkdir -p $PIDPATH
-
-	config_load ddnsmngr
-	config_foreach add_object host
-
-	i=1
-	for conf in $CONFIG_FILES; do
-		instance="ddnsmngr_${i}"
-		i=$(( i + 1 ))
-
-		procd_open_instance $instance
-		procd_set_param command "$PROG"
-		procd_append_param command -f "${CONFIGPATH}/${conf}"
-		procd_append_param command -l debug
-		procd_append_param command -P "${PIDPATH}/${conf}"
-		procd_append_param command -n -C
-		procd_close_instance
-	done
-}
-
-stop_ddnsmngr_service() {
-	rm -rf $CONFIGPATH
-	return 0
-}
-
-add_ddnsmngr_triggers() {
-	procd_open_trigger
-	for intf in $CLIENT_INTFS; do
-		# No need to handle other ifevents like ifupdate etc
-		procd_add_interface_trigger "interface.*.up" $intf /etc/init.d/ddnsmngr restart
-	done
-	procd_close_trigger
-}

decollector/Config.in

@@ -1,7 +0,0 @@
-menu "Configuration"
-
-config DECOLLECTOR_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 6
-
-endmenu

decollector/Makefile

@@ -1,81 +0,0 @@
-#
-# Copyright (C) 2021-2024 IOPSYS Software Solutions AB
-# Copyright (C) 2025 Genexis AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=decollector
-PKG_VERSION:=6.2.1.8
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b7e294d7c610adfd80cf40a0628c189695dc5156
-PKG_SOURCE_URL:=https://dev.iopsys.eu/multi-ap/decollector.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@genexis.eu>
-
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/decollector
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=WiFi DataElements Collector Proxy
-  DEPENDS:=+libuci +libubox +ubus +libpthread +libnl-genl \
-	   +libeasy +libwifiutils +libieee1905 +ieee1905-map-plugin
-endef
-
-define Package/decollector/description
- It implements the WiFi DataElements Agent as defined in the Wi-Fi Alliance's
- DataElements specification.
-endef
-
-
-define Package/decollector/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
-MAKE_FLAGS += DEBUG=1
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-  rsync -r --exclude=.* ~/git/decollector/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-MAKE_PATH:=src
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_DECOLLECTOR_EASYMESH_VERSION)
-
-EXECS := \
-	$(if $(CONFIG_PACKAGE_decollector),decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-define Package/decollector/install
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/decollector.init $(1)/etc/init.d/decollector
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/decollector $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,decollector))

dectmngr/Makefile

@@ -1,14 +1,20 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.7.10
+PKG_VERSION:=3.5.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1f851980a6ba616df54f79930225f8bcd563b711
+PKG_SOURCE_VERSION:=8c94908eb230dc453dd2f5575be6c06b086b2e7d
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -28,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c +gpiod-tools +voicemngr
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
 endef
 
 define Package/$(PKG_NAME)/description
@@ -56,14 +62,11 @@ endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/dspg
+	$(INSTALL_DIR) $(1)/etc
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
-ifeq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./firmware/common/* $(1)/etc/dspg/
-endif
 	$(CP) ./files/etc/* $(1)/etc/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef

dectmngr/files/etc/config/dect

@@ -1,6 +1,3 @@
 config dect 'global'
-	option log_dect_cmbs 'syslog'
-	option log_level 'realtime,warning,error'
-
-config dect 'base'
-	option enable '1'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -6,124 +6,31 @@ START=70
 STOP=12
 
 USE_PROCD=1
+NAME=dectmngr
 PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
-DCX81_UART_DT_ALIAS=/proc/device-tree/aliases/dcx81-uart
-
-get_extension_shift() {
-   local dect_exts
-
-   get_dect_extension() {
-       local ext=$1
-       local type
-
-       config_get type $ext type
-
-       [ "$type" == "dect" ] && echo $ext
-    }
-
-    config_load "asterisk"
-
-    dect_exts=$(config_foreach get_dect_extension "extension" |sort |head -n1)
-
-    echo "${dect_exts#extension}"
-}
 
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
-	dect_pid=$(pidof $PROG)
-	[ -n "$dect_pid" ] && kill $dect_pid
+	pidof $NAME && killall -q $NAME
 
-	pidof $PROG > /dev/null 2>&1 && sleep 2 # wait for the process to stop gracefully
-	while pidof $PROG > /dev/null 2>&1; do
-		dect_pid=$(pidof $PROG)
-		[ -n "$dect_pid" ] && kill -9 $dect_pid
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
 		sleep 1
 	done
 }
 
-has_dect() {
-	[ -f "$DCX81_UART_DT_ALIAS" ]
-}
-
-get_dcx81_device() {
-	readonly dcx81_uart_dt_node="/proc/device-tree/$(cat "$DCX81_UART_DT_ALIAS" 2>/dev/null)"
-	[ -e "$dcx81_uart_dt_node" ] || return 1
-	for tty_dt_node in /sys/class/tty/*/device/of_node; do
-		if [ "$tty_dt_node" -ef "$dcx81_uart_dt_node" ]; then
-			readonly uevent_file="${tty_dt_node%%/device/of_node}/uevent"
-			local device_name_line
-			device_name_line="$(grep '^DEVNAME=' "$uevent_file")" || return 1
-			readonly device="/dev/${device_name_line##DEVNAME=}"
-			[ -c "$device" ] || return 1
-			printf "%s" "$(basename $device)"
-			return 0
-		fi
-	done
-	return 1
-}
-
-check_dcx81_firmware() {
-	local dcx81_uart=$1
-	local fw_link="/lib/firmware/dcx81_firmware"
-	local fw_file
-
-	[ -L "$fw_link" ] || return
-
-	fw_file=$(readlink -f $fw_link)
-	[ -f "$fw_file" ] || return
-
-	# the symbolic link is not needed
-	rm -f $fw_link
-
-	eval $(/sbin/cmbs_tcx -comname "$dcx81_uart" -fw_version |grep DCX81_FW_Version)
-	[ -n "$DCX81_FW_Version" ] || return
-
-	if echo $(basename $fw_file) | grep -qi "$DCX81_FW_Version" ; then
-		logger -t "$PROG" "DCX81 running expected $DCX81_FW_Version"
-		return;
-	fi
-
-	logger -t "$PROG" "DCX81 firmware upgrading to $fw_file"
-	/sbin/cmbs_tcx -comname "$dcx81_uart" -fwu "$fw_file" 2>&1 >/dev/null &
-
-	echo -n "Updrading DCX81 firmware.." >/dev/console
-	local wait_time=0
-	while pidof cmbs_tcx >/dev/null && [ "$wait_time" -lt "200" ] ; do
-		sleep 5
-		wait_time=$(($wait_time + 5))
-		echo -n "." >/dev/console
-	done
-
-	if pidof cmbs_tcx >/dev/null ; then
-		killall -9 cmbs_tcx
-		logger -t "$PROG" "DCX81 firmware upgrade timeout"
-	else
-		logger -t "$PROG" "DCX81 firmware upgrade done"
-	fi
-}
-
 start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
 	local rxtun=
 
-	if ! has_dect; then
-		logger -t "$PROG" "Not starting because no DECT hardware is available."
-		return 0
-	fi
+	test $(db get hw.board.hasDect) = "0" && return
 
-	local dcx81_uart_device
-	if ! dcx81_uart_device="$(get_dcx81_device)"; then
-		logger -t "$PROG" -p daemon.warning "Could not determine DCX81 UART device. Falling back to default ttyH0."
-		dcx81_uart_device="ttyH0"
-	fi
-
-	check_dcx81_firmware $dcx81_uart_device
-
-	opt_ext="-extensionShift $(get_extension_shift)"
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -140,30 +47,20 @@ start_service() {
 
 	config_load dect
 	config_get log_dect_cmbs global log_dect_cmbs syslog
-	config_get pcm_slot_start global pcm_slot_start
-	config_get pcm_fsync global pcm_fsync
-
-        [ -n "$pcm_fsync" ] && opt_ext="$opt_ext -sync $pcm_fsync"
-        [ -n "$pcm_slot_start" ] && opt_ext="$opt_ext -slotsShift $pcm_slot_start"
 
 	procd_open_instance
-
-	case "$log_dect_cmbs" in
-	none)
+	if [ "$log_dect_cmbs" = "none" ]; then
 		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" $opt_ext
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	file)
+	elif [ "$log_dect_cmbs" = "file" ]; then
 		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -log $LOG_PATH/dect-cmbs.log $opt_ext
-		;;
-	*)
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
 		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command "$PROG" -comname "$dcx81_uart_device" -syslog $opt_ext
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
 		rm -f $LOG_PATH/*
-		;;
-	esac
+	fi
 
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
@@ -172,8 +69,9 @@ start_service() {
 }
 
 stop_service() {
-	has_dect || return 0
+	test $(db get hw.board.hasDect) = "0" && return
 
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
@@ -181,13 +79,18 @@ reload_service() {
 	ubus call dect reload
 }
 
-service_triggers() {
+service_triggers()
+{
 	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
 	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
 }
 
 boot() {
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
+
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
 	start
 }
+

dhcpmngr/Makefile

@@ -1,59 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dhcpmngr
-PKG_VERSION:=1.0.6
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dhcpmngr.git
-PKG_SOURCE_VERSION:=986f66608959f4f589009d580b046e250d8c620d
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dhcpmngr
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Package to add Device.DHCPv4 and v6 data model support.
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  DEPENDS+=+DNSMNGR_DNS_SD:umdns
-  DEPENDS+=+DNSMNGR_BACKEND_DNSMASQ:dnsmasq
-  DEPENDS+=+DNSMNGR_BACKEND_UNBOUND:odhcpd
-endef
-
-define Package/dhcpmngr/description
-  Package to add Device.DHCPv4. and Device.DHCPv6. data model support.
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dhcpmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/dhcpmngr/install
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_lease_start_time.user $(1)/etc/udhcpc.user.d/udhcpc_lease_start_time.user
-ifeq ($(CONFIG_DNSMNGR_BACKEND_UNBOUND),y)
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DATA) ./files/etc/uci-defaults/unbound.odhcpd.uci_default $(1)/etc/uci-defaults/16-set-unbound-as-odhcpd-leasetrigger
-endif
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdhcpmngr.so $(1) $(PKG_NAME)
-endef
-
-$(eval $(call BuildPackage,dhcpmngr))

dhcpmngr/bbfdm_service.json

@@ -1,20 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dhcpmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DHCPv4"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "DHCPv6"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dhcpmngr/files/etc/uci-defaults/unbound.odhcpd.uci_default

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# update odhcpd uci to use unbound's script as leasetrigger
-uci -q get dhcp.odhcpd >/dev/null 2>&1 && {
-	maindhcp="$(uci -q get dhcp.odhcpd.maindhcp)"
-
-	# if odhcpd is the main dhcp
-	[ "$maindhcp" = "1" ] || [ "$maindhcp" = "true" ] || [ "$maindhcp" = "on" ] && {
-		# if unbound daemon and unbound script file is present
-		[ -e /usr/lib/unbound/odhcpd.sh ] && [ -e /usr/sbin/unbound ] && {
-			# then set unbound script as leasetrigger in dhcp UCI
-			uci -q set dhcp.odhcpd.leasetrigger='/usr/lib/unbound/odhcpd.sh'
-		}
-	}
-}
-
-exit 0

dhcpmngr/files/etc/udhcpc.user.d/udhcpc_lease_start_time.user

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-leasestarttime="$(awk -F'.' '{print $1}' /proc/uptime 2> /dev/null)"
-target_file=/tmp/dhcp_client_info
-target_str="$INTERFACE $lease $leasestarttime"
-
-# if this interface is present in file, then replace it
-if grep -q "$INTERFACE" "$target_file" 2> /dev/null; then
-	# replace the whole line if pattern matches
-	sed -i "/${INTERFACE}/c\\${target_str}" "$target_file"
-else
-	# interface info was not present, append it to the file
-	echo "$target_str" >> "$target_file"
-fi

dnsmngr/Config.in

@@ -1,30 +0,0 @@
-if PACKAGE_dnsmngr
-
-menu "Configuration"
-
-config DNSMNGR_DNS_SD
-	bool "Include Device.DNS.SD. TR-181 support"
-	default y
-	help
-	   Set this option to include support for TR-181 DNS.SD. object.
-
-choice
-	prompt "Select backend for DNS management"
-	default DNSMNGR_BACKEND_DNSMASQ
-	depends on PACKAGE_dnsmngr
-	help
-		Select which backend daemon to use for DNS
-
-config DNSMNGR_BACKEND_DNSMASQ
-	bool "Use dnsmasq for dns and dhcp"
-	help
-	   Enable this option to use dnsmasq + odhcpd for dns and dhcp.
-
-config DNSMNGR_BACKEND_UNBOUND
-	bool "Use unbound with odhcpd-full for dns and dhcp"
-	help
-	   Enable this option to use unbound + odhcpd for dns and dhcp.
-
-endchoice
-endmenu
-endif

dnsmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2022-2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dnsmngr
-PKG_VERSION:=1.0.18
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/dnsmngr.git
-PKG_SOURCE_VERSION:=80fa147e6f1f0d9c1a62a62a693ff3adaef45363
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
-
-MAKE_PATH:=src
-
-define Package/dnsmngr
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +odhcpd
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service
-  DEPENDS+=+DNSMNGR_DNS_SD:umdns
-  DEPENDS+=+DNSMNGR_BACKEND_DNSMASQ:dnsmasq
-  DEPENDS+=+DNSMNGR_BACKEND_UNBOUND:unbound-daemon +DNSMNGR_BACKEND_UNBOUND:unbound-control
-  TITLE:=Package to configure DNS backend and TR-181 support
-endef
-
-define Package/dnsmngr/description
-  Package to configure DNS backend and TR-181 support.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(CONFIG_DNSMNGR_DNS_SD),y)
-define Build/Compile
-	$(call Build/Compile/Default,all)
-endef
-else
-define Build/Compile
-	$(call Build/Compile/Default,dns)
-endef
-endif
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/dnsmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-ifeq ($(CONFIG_DNSMNGR_BACKEND_DNSMASQ),y)
-        TARGET_CFLAGS += -DDNSMASQ_BACKEND
-endif
-
-define Package/dnsmngr/install
-	$(INSTALL_DIR) $(1)/etc/umdns
-	$(INSTALL_DIR) $(1)/etc/umdns/tmp
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dnsmngr $(1)/lib/upgrade/keep.d/dnsmngr
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/src/libdnsmngr.so $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_SCRIPT) -d $(PKG_BUILD_DIR)/scripts/nslookup $(1)
-ifeq ($(CONFIG_DNSMNGR_DNS_SD),y)
-	$(BBFDM_INSTALL_MS_PLUGIN) $(PKG_BUILD_DIR)/src/libdns_sd.so $(1) $(PKG_NAME) 10
-endif
-endef
-
-$(eval $(call BuildPackage,dnsmngr))

dnsmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dnsmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DNS"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dnsmngr/files/lib/upgrade/keep.d/dnsmngr

@@ -1 +0,0 @@
-/etc/umdns/*

dslmngr/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018-2024 iopsys Software Solutions AB
+# Copyright (C) 2018 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,15 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.10
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/dslmngr.git
-PKG_SOURCE_VERSION:=8fb4093b4d26b3cb06603e110d424005e33cf5d6
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MAINTAINER:=Rahul Thakur <rahul.thakur@iopsys.eu>
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -26,12 +25,9 @@ PKG_LICENSE_FILES:=LICENSE
 
 
 include $(INCLUDE_DIR)/package.mk
-include ../bbfdm/bbfdm.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-else ifneq ($(CONFIG_TARGET_airoha),)
-  TARGET_PLATFORM=AIROHA
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -43,7 +39,6 @@ define Package/dslmngr
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
   DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +TARGET_airoha:br2684ctl
 endef
 
 define Package/dslmngr/description
@@ -64,7 +59,7 @@ MAKE_FLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-	rsync -r --exclude=.* ./dslmngr/ $(PKG_BUILD_DIR)/
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -73,18 +68,8 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(INSTALL_DIR) $(1)/etc/dsl
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
-endif
-
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
-	$(BBFDM_INSTALL_MS_DM) $(PKG_BUILD_DIR)/libbbfdsl.so $(1) $(PKG_NAME)
 endef
 
 $(eval $(call BuildPackage,dslmngr))

dslmngr/bbfdm_service.json

@@ -1,28 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "dslmngr",
-    "unified_daemon": false,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "DSL"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "FAST"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "ATM"
-      },
-      {
-        "parent_dm": "Device.",
-        "object": "PTM"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

dslmngr/files/airoha/etc/init.d/xdsl_wan

@@ -1,26 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=99
-USE_PROCD=1
-
-start_service() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ -f /etc/board.json ] || return 0
-
-	if [ "$need_xdsl" != "" ]; then
-		procd_open_instance xdsl_wan
-		procd_set_param command /sbin/xdsl_wan
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-boot() {
-	: # boot-up is handled from 'hsm' application
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "dsl"
-}

dslmngr/files/airoha/lib/dsl/airoha.sh

@@ -1,28 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-xtm_remove_devices() {
-	:
-}
-
-xtm_create_devices() {
-	:
-}
-
-xdsl_configure() {
-	# Support bridged WAN interface
-	ebtables --concurrent -t broute -D BROUTING -p 0xbeed -j DROP 2> /dev/null
-	ebtables --concurrent -t broute -I BROUTING -p 0xbeed -j DROP
-}
-
-xdsl_stop() {
-	return 0
-}
-
-xdsl_init() {
-	readonly need_xdsl="$(jsonfilter -i /etc/board.json -e @.dsl)"
-	[ "$need_xdsl" = "" ] && exit 0
-
-	echo "Starting DSL"
-}

dslmngr/files/airoha/sbin/xdsl_wan

@@ -1,270 +0,0 @@
-#!/bin/sh
-
-source "/lib/functions.sh"
-source "/lib/functions/network.sh"
-source "/lib/functions/system.sh"
-
-PREVLINK=""
-LINK=""
-LINKSPEED=""
-PREVWANMODE=""
-WANMODE=""
-CONFIGURED=0
-CINDEX=0
-WANPORT="$(jsonfilter -i /etc/board.json -e @.network.wan.device)"
-
-delete_atm_device() {
-	/userfs/bin/blapi_cmd xdsl atm_delete_interface $CINDEX
-	CINDEX=$((CINDEX+1))
-}
-
-delete_atm_devices() {
-	CINDEX=0
-	config_load dsl
-	config_foreach delete_atm_device atm-device
-}
-
-configure_atm_device() {
-	local vpi vci encapsulation qos_class pcr mbs scr
-	local encap qos ethmac
-
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr "0"
-	config_get mbs $1 mbs "0"
-	config_get scr $1 scr "0"
-
-	case $encapsulation in # llc, vcmux
-		vcmux)
-			encap="1483 Bridged IP VC-Mux"
-		;;
-		*)
-			encap="1483 Bridged IP LLC"
-		;;
-
-	esac
-
-	ethmac="$(echo -n "$(macaddr_add 02:AA:BB:01:23:40 $((CINDEX+2)))" | sed 's#:##g')"
-
-	/userfs/bin/blapi_cmd xdsl create_device $CINDEX ATM "" "$ethmac"
-	/userfs/bin/blapi_cmd xdsl atm_create_interface $CINDEX ATM "$qos_class" "$encap" "$vpi" "$vci" "$pcr" "$scr" "$mbs" 0
-
-	CINDEX=$((CINDEX+1))
-}
-
-create_atm_devices() {
-	delete_atm_devices
-
-	CINDEX=0
-	config_foreach configure_atm_device atm-device
-}
-
-configure_line() {
-	local mode profile bitswap sra us0 sesdrop sos roc ginp gvector mod prof
-	local adsl1_flag=0 issue2_flag=0 Glite_flag=0 adsl2_flag=0 adsl2p_flag=0 vdsl2_flag=0
-	local pro_8a_flag=0 pro_8b_flag=0 pro_8c_flag=0 pro_8d_flag=0 pro_12a_flag=0 pro_12b_flag=0 pro_17a_flag=0 pro_30a_flag=0 pro_35b_flag=0
-
-	config_get mode $1 mode "vdsl2"
-	config_get profile $1 profile "35b"
-	config_get bitswap $1 bitswap "1"
-	config_get sra $1 sra "1"
-	config_get us0 $1 us0 "1"
-	config_get sos $1 sos "0"
-	config_get roc $1 roc "0"
-	config_get ginp $1 ginp "1"
-	config_get gvector $1 gvector "1"
-
-	for mod in $mode; do
-		[ "$mod" = "gdmt" ] && adsl1_flag=1
-		[ "$mod" = "glite" ] && Glite_flag=1
-		[ "$mod" = "t1413" ] && issue2_flag=1
-		[ "$mod" = "adsl2" ] && adsl2_flag=1
-		[ "$mod" = "adsl2p" ] && adsl2p_flag=1
-		[ "$mod" = "vdsl2" ] && vdsl2_flag=1
-	done
-
-	for prof in $profile; do
-		[ "$prof" = "8a" ] && pro_8a_flag=1
-		[ "$prof" = "8b" ] && pro_8b_flag=1
-		[ "$prof" = "8c" ] && pro_8c_flag=1
-		[ "$prof" = "8d" ] && pro_8d_flag=1
-		[ "$prof" = "12a" ] && pro_12a_flag=1
-		[ "$prof" = "12b" ] && pro_12b_flag=1
-		[ "$prof" = "17a" ] && pro_17a_flag=1
-		[ "$prof" = "30a" ] && pro_30a_flag=1
-		[ "$prof" = "35b" ] && pro_35b_flag=1
-	done
-
-	/userfs/bin/blapi_cmd xdsl set_adsl_profile "$pro_8a_flag" "$pro_8b_flag" "$pro_8c_flag" "$pro_8d_flag" "$pro_12a_flag" "$pro_12b_flag" "$pro_17a_flag" "$pro_30a_flag" "$pro_35b_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_mode "$adsl1_flag" "$issue2_flag" "$Glite_flag" "$adsl2_flag" "$adsl2p_flag" "$vdsl2_flag"
-	/userfs/bin/blapi_cmd xdsl set_adsl_gvector "$((!gvector))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_ginp "$((!ginp))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sos_roc "$((!sos))" "$((!roc))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_us0 "$((!us0))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_sra "$((!sra))"
-	/userfs/bin/blapi_cmd xdsl set_adsl_bitswap "$((!bitswap))"
-
-	CONFIGURED=1
-}
-
-configure_lines() {
-	config_load dsl
-	config_foreach configure_line dsl-line
-}
-
-call_wan_hotplug() {
-	# initializations
-	local updown="$1"
-	local ethwan="$2"
-
-	# ethernet hotlugs expect LINK and PORT environment variables set
-	env -i LINK="$updown" PORT="$ethwan" /sbin/hotplug-call ethernet
-}
-
-if [ "$WANPORT" = "ae_wan" -a -f /proc/device-tree/ae_wan/wan-dsl ]; then
-	/etc/init.d/br2684ctl stop
-else
-	/etc/init.d/br2684ctl start
-fi
-
-# Wait for nas0 interface to come up.
-while [ "$(devstatus "$WANPORT" | jsonfilter -e @.up)" != "true" ]; do
-	sleep 1
-done
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-	[ \( "$LINK" = "down" -o "$LINK" = "up" \) ] && break
-	sleep 1
-done
-sleep 2
-
-/userfs/bin/blapi_cmd xdsl set_adsl_sysvid "26 00 47 4E 58 53 00 00" # GNXS vendor id
-/userfs/bin/blapi_cmd xdsl set_adsl_version "$(ubus call fwbank dump | jsonfilter -e "@.bank[@.active=true].swver" | cut -f1 -d'_' | cut -f1 -d'-' | hexdump -e '11/1 "%02x " "\n"' | head -n1)"
-/userfs/bin/blapi_cmd xdsl set_power_up_down 1
-/userfs/bin/blapi_cmd xdsl set_power_up_down 0
-sleep 1
-
-while [ true ]; do
-	LINK="$(awk '/ADSL link status:/{print $4}' /proc/tc3162/adsl_stats)"
-
-	if [ "$LINK" != "$PREVLINK" -a \( "$LINK" = "down" -o "$LINK" = "up" \) ]; then
-		if [ "$LINK" = "down" ]; then
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				rm -rf /tmp/qos/wan_link_shape_rate
-				rm -rf /tmp/qos/wan_link_speed
-				/usr/sbin/qos-uplink-bandwidth
-			fi
-
-			[ "$CONFIGURED" -eq 0 ] && configure_lines # Needs to be done once the slave SoC is in down state and we've not been able to auto-sync.
-			if [ -n "$WANMODE" ]; then
-				if [ "$WANMODE" = "PTM" ]; then
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 0 1
-				else
-					delete_atm_devices
-				fi
-			fi
-
-			call_wan_hotplug "down" "$WANPORT"
-		else
-			CONFIGURED=1
-			WANMODE="$(awk '/TPSTC type:/{print $4}' /proc/tc3162/adsl_stats)"
-			if [ "$WANMODE" != "$PREVWANMODE" ]; then
-				OLDWANPORT="$WANPORT"
-				network_defer_device "$OLDWANPORT"
-
-				if [ -f /proc/device-tree/ae_wan/wan-dsl ]; then
-					WANPORT="ae_wan"
-				else
-					WANPORT="nas10"
-				fi
-
-				if [ "$WANMODE" = "PTM" ]; then
-					/etc/init.d/br2684ctl stop
-					delete_atm_devices
-					/userfs/bin/blapi_cmd system set_wan_mode 1
-					/userfs/bin/blapi_cmd xdsl reload_ko 2
-					/userfs/bin/blapi_cmd xdsl ptm_do_reset_sequence 1 2
-
-					# Set extended TPID for PTM packet flow
-					sys memwl 1FB50000 81001839
-					# VLAN TPID - VLAN
-					sys memwl 1FB50F18 8100
-
-					ifconfig ${WANPORT} mtu 1500
-				else
-					/userfs/bin/blapi_cmd system set_wan_mode 0
-					/userfs/bin/blapi_cmd xdsl reload_ko 1
-					/etc/init.d/br2684ctl start
-
-					# Set extended TPID for ATM packet flow
-					sys memwl 1FB50000 884C1839
-					# VLAN TPID - MPOA
-					sys memwl 1FB50F18 884C
-
-					ifconfig ${WANPORT} mtu 1982
-					ifconfig ${WANPORT} down up
-
-					OLDWANPORT="$WANPORT"
-					ATMINDEX="$(cat /sys/class/atm/TSARM*/atmindex | tail -n1 2> /dev/null)"
-					WANPORT="nas$((ATMINDEX))"
-				fi
-
-				if [ "$OLDWANPORT" != "$WANPORT" ]; then
-					call_wan_hotplug "down" "$OLDWANPORT"
-
-					FILES="$(grep "$OLDWANPORT" /etc/config/* | cut -f1 -d: | uniq | cut -f4 -d/ | xargs)"
-					for FILE in $FILES; do
-						sed -i -e "s#${OLDWANPORT}#${WANPORT}#g" "/etc/config/${FILE}"
-						"/etc/init.d/${FILE}" restart
-					done
-				else
-					/etc/init.d/network restart
-				fi
-				ifconfig ${OLDWANPORT} down up
-			fi
-
-			if [ "$WANMODE" = "PTM" ]; then
-				: # ToDo
-			else
-				create_atm_devices
-			fi
-
-			call_wan_hotplug "up" "$WANPORT"
-			PREVWANMODE="$WANMODE"
-
-			if [ ! -s /tmp/qos/wan_link_shape_rate ]; then
-				LINKSPEED="$(awk '/far-end interleaved channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-				LINKSPEED=$((LINKSPEED))
-				if [ "$LINKSPEED" -eq 0 ]; then
-					LINKSPEED="$(awk '/far-end fast channel bit rate/{print $6}' /proc/tc3162/adsl_stats)"
-					LINKSPEED=$((LINKSPEED))
-				fi
-
-				if [ "$LINKSPEED" -ne 0 ]; then
-					mkdir -p /tmp/qos
-					touch /tmp/qos/wan_link_shape_rate
-
-					/userfs/bin/qosrule discpline Rate uplink-bandwidth ${LINKSPEED}
-					hw_nat -! > /dev/null 2>&1
-				else
-					rm -rf /tmp/qos/wan_link_speed
-					/usr/sbin/qos-uplink-bandwidth
-				fi
-			fi
-		fi
-
-		# Toggle link state
-		network_defer_device "$WANPORT"
-		network_ready_device "$WANPORT"
-
-		# We are only interested in the transtion from init -> up/down and up/down -> down/up and vice versa.
-		# Since we poll the status via in-band signaling packets might get lost and the /procfs file is empty.
-		# This state we don't want to handle as it will toggle the link and do a re-setup which is totally unnecessary and unwanted.
-		PREVLINK="$LINK"
-	fi
-
-	sleep 5
-done

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,313 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables --concurrent -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables --concurrent -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	[ -d /sys/class/net/dsl0/ ] || exit
-
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,54 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	list profile 35b
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,41 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}

easy-qos/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,8 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+        commit firewall
+EOT

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,130 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=6.4.44
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=e4f811b7cd2836cdcce5ea0f97f515a317da5bc3
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+  TARGET_PLATFORM=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+EASY_SOC_LIBS := \
+	libeasy \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,29 @@
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+

ebtables-extensions/Makefile

@@ -1,257 +0,0 @@
-#
-# Copyright (C) 2024 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ebtables-extensions
-PKG_VERSION:=2.0.5
-PKG_LICENSE:=GPL-2.0
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/network/ebtables-extensions.git
-PKG_SOURCE_VERSION:=7357622d806833d93d317164dc6673fbf5fd1629
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/ebt-vlantranslation
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables VLAN translation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_vlantranslation.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_vlantranslation)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dscp2pbit
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for DSCP-to-Pbit mapping
-  DEPENDS+=+kmod-ebtables
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dscp2pbit.ko
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dscp2pbit)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcp
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DHCP snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dhcp.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dhcp)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcpv6
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DHCPv6 snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dhcpv6.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dhcpv6)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-ra
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables NDP/RA snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_ra.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_ra)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dns
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables DNS manipulation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_dns.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_dns)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-pppoe_disc
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables PPPoE manipulation
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_pppoe_disc.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_pppoe_disc)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-l2pt
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables L2CP tunneling
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_l2pt.ko
-  DEPENDS+=@TARGET_airoha +kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_l2pt)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtarp
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended ARP matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtarp.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtarp)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtip
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended IPv4 matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtip.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtip)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-xtip6
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables extended IPv6 matching
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_xtip6.ko
-  DEPENDS+=+kmod-ebtables
-  AUTOLOAD:=$(call AutoLoad,30,ebt_xtip6)
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-igmpsnooping
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables IGMP snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_igmpsnooping.ko
-  DEPENDS+=+kmod-ebtables
-  # AUTOLOAD:=$(call AutoLoad,30,ebt_igmpsnooping) - Will be loaded on demand
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-mldsnooping
-  SUBMENU:=Other modules
-  TITLE:=Kernel module for ebtables MLD snooping
-  FILES:=$(PKG_BUILD_DIR)/src/ebt_mldsnooping.ko
-  DEPENDS+=+kmod-ebtables
-  # AUTOLOAD:=$(call AutoLoad,30,ebt_mldsnooping) - Will be loaded on demand
-  KCONFIG:=
-endef
-
-define KernelPackage/ebt-dhcp/description
-	Kernel module to enable DHCP snooping for ebtables
-endef
-
-define KernelPackage/ebt-dhcpv6/description
-	Kernel module to enable DHCPv6 snooping for ebtables
-endef
-
-define KernelPackage/ebt-ra/description
-	Kernel module to enable NDP/RA snooping for ebtables
-endef
-
-define KernelPackage/ebt-dns/description
-	Kernel module to enable DNS manipulation for ebtables
-endef
-
-define KernelPackage/ebt-pppoe_disc/description
-	Kernel module to enable PPPoE manipulation for ebtables
-endef
-
-define KernelPackage/ebt-l2pt/description
-	Kernel module to enable L2CP tunneling for ebtables
-endef
-
-define KernelPackage/ebt-xtarp/description
-	Kernel module to enable extended ARP matching for ebtables
-endef
-
-define KernelPackage/ebt-xtip/description
-	Kernel module to enable extended IPv4 matching for ebtables
-endef
-
-define KernelPackage/ebt-xtip6/description
-	Kernel module to enable extended IPv6 matching for ebtables
-endef
-
-define KernelPackage/ebt-vlantranslation/description
-	Kernel module to enable VLAN translation for ebtables
-endef
-
-define KernelPackage/ebt-dscp2pbit/description
-	Kernel module to enable DSCP-to-Pbit mapping for ebtables
-endef
-
-define KernelPackage/ebt-igmpsnooping/description
-	Kernel module to enable IGMP snooping for ebtables
-endef
-
-define KernelPackage/ebt-mldsnooping/description
-	Kernel module to enable MLD snooping for ebtables
-endef
-
--include ../../broadcom/bcmkernel/bcm-kernel-toolchain.mk
-
-define Build/Prepare
-
-ifeq ($(LOCAL_DEV),1)
-	$(CP) -rf ./ebtables-extensions/* $(PKG_BUILD_DIR)/
-else
-	$(Build/Prepare/Default)
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcp.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcpv6.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_ra.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dns.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_pppoe_disc.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-ifeq ($(CONFIG_TARGET_airoha),y)
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_l2pt.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtarp.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip6.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_igmpsnooping.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_mldsnooping.h $(LINUX_DIR)/include/uapi/linux/netfilter_bridge/
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_vlantranslation.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dscp2pbit.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcp.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dhcpv6.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_ra.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_dns.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_pppoe_disc.h $(1)/include/uapi/linux/netfilter_bridge/
-ifeq ($(CONFIG_TARGET_airoha),y)
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_l2pt.h $(1)/include/uapi/linux/netfilter_bridge/
-endif
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtarp.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_xtip6.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_igmpsnooping.h $(1)/include/uapi/linux/netfilter_bridge/
-	$(CP) $(PKG_BUILD_DIR)/src/ebt_mldsnooping.h $(1)/include/uapi/linux/netfilter_bridge/
-endef
-
-ifeq ($(CONFIG_TARGET_airoha),y)
-  KERNEL_MAKE_FLAGS += PLATFORM="ECONET"
-endif
-
-define Build/Compile
-	$(KERNEL_MAKE) M="$(PKG_BUILD_DIR)/src" modules
-endef
-
-$(eval $(call KernelPackage,ebt-vlantranslation))
-$(eval $(call KernelPackage,ebt-dscp2pbit))
-$(eval $(call KernelPackage,ebt-dhcp))
-$(eval $(call KernelPackage,ebt-dhcpv6))
-$(eval $(call KernelPackage,ebt-ra))
-$(eval $(call KernelPackage,ebt-dns))
-$(eval $(call KernelPackage,ebt-pppoe_disc))
-$(eval $(call KernelPackage,ebt-l2pt))
-$(eval $(call KernelPackage,ebt-xtarp))
-$(eval $(call KernelPackage,ebt-xtip))
-$(eval $(call KernelPackage,ebt-xtip6))
-$(eval $(call KernelPackage,ebt-igmpsnooping))
-$(eval $(call KernelPackage,ebt-mldsnooping))

endptmngr/Config.in

@@ -0,0 +1,4 @@
+
+config ENDPT_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

endptmngr/Makefile

@@ -0,0 +1,69 @@
+#
+# Copyright (C) 2018 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=2390a3503990e04e33e8e448ad9dccc00f206908
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptmngr/config
+	source "$(SOURCE)/Config.in"
+endef
+
+define Package/endptmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom Voice Endpoint Manager
+  URL:=
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+endef
+
+define Package/endptmngr/description
+	endptmngr
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
+
+define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
+endef
+
+$(eval $(call BuildPackage,endptmngr))

endptmngr/files/etc/init.d/endptmngr

@@ -4,15 +4,13 @@ START=68
 STOP=12
 
 USE_PROCD=1
-NAME=voicemngr
+NAME=endptmngr
 
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
 	procd_open_instance
-	procd_set_param env hw_board_hasDect="$(db get hw.board.hasDect)" \
-			    hw_board_VoicePortNames="$(db get hw.board.VoicePortNames)" \
-
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"
 	procd_set_param nice -12
@@ -25,5 +23,5 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger asterisk
+	procd_add_reload_trigger asterisk 
 }

ethmngr/Config.in

@@ -1,17 +0,0 @@
-if (PACKAGE_ethmngr)
-
-menu "Configurations"
-
-config ETHMNGR_MACVLAN_EXTENSION
-	bool "Enable datamodel MACVLAN vendor extension"
-	default y
-
-config ETHMNGR_EXPOSE_ETHERNET_OBJECT
-	bool "Expose ethernet ubus object to fetch and clear interface stats"
-	default y
-
-config ETHMNGR_VENDOR_PREFIX
-	string "Package specific datamodel Vendor Prefix for TR181 extensions"
-	default ""
-endmenu
-endif

ethmngr/Makefile

@@ -1,33 +1,29 @@
 #
-# Copyright (C) 2020-2024 Iopsys
+# Copyright (C) 2020 Iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=3.0.8
+PKG_VERSION:=2.0.1
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/hal/ethmngr.git
-PKG_SOURCE_VERSION:=c73e5b15718ca40b2740bbe6151dfbb2bcca16df
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
-endif
-
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/iopsys/bbfdm/bbfdm.mk
 
 define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-  DEPENDS+=+libbbfdm-api +libbbfdm-ubus +dm-service +libblobmsg-json +libjson-c +libc +libubus
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -36,43 +32,15 @@ define Package/ethmngr/description
  It uses APIs from the libethernet.so library.
 endef
 
-define Package/$(PKG_NAME)/config
-       source "$(SOURCE)/Config.in"
-endef
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_ETHMNGR_VENDOR_PREFIX),"")
-VENDOR_PREFIX = $(CONFIG_BBF_VENDOR_PREFIX)
-else
-VENDOR_PREFIX = $(CONFIG_ETHMNGR_VENDOR_PREFIX)
-endif
-
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(VENDOR_PREFIX)\\\"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        $(CP) -rf ~/git/ethmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-
-ifeq ($(CONFIG_ETHMNGR_MACVLAN_EXTENSION),y)
-TARGET_CFLAGS += -DETHMNGR_MACVLAN_EXTENSION
-endif
-
-ifeq ($(CONFIG_ETHMNGR_EXPOSE_ETHERNET_OBJECT),y)
-TARGET_CFLAGS += -DETHMNGR_EXPOSE_ETHERNET_OBJECT
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-	$(BBFDM_REGISTER_SERVICES) ./bbfdm_service.json $(1) $(PKG_NAME)
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/bbfdm_service.json

@@ -1,16 +0,0 @@
-{
-  "daemon": {
-    "enable": "1",
-    "service_name": "ethmngr",
-    "unified_daemon": true,
-    "services": [
-      {
-        "parent_dm": "Device.",
-        "object": "Ethernet"
-      }
-    ],
-    "config": {
-      "loglevel": "3"
-    }
-  }
-}

ethmngr/files/etc/init.d/ethmngr

@@ -1,17 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=80
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-start_service() {
-	if [ -f $PROG ]; then
-		procd_open_instance "ethmngr"
-		procd_set_param command ${PROG}
-		procd_append_param command -l 3
-		procd_set_param respawn
-		procd_close_instance "ethmngr"
-	fi
-}

ethmngr/files/etc/ruleng/ethport.json

@@ -1,23 +0,0 @@
-{
-	"ethport_update": {
-		"if" : [
-			{
-				"event": "network.device",
-				"match": {
-					"wireless": false
-				}
-			}
-		],
-		"then" : [
-			{
-				"cli": "/sbin/hotplug-call ethernet",
-				"envs": {
-					"PORT": "&network.device->ifname",
-					"LINK": "&network.device->link"
-				},
-				"timeout": 1
-			}
-		]
-	}
-}
-

ethmngr/files/etc/uci-defaults/ruleng.ethport

@@ -1,2 +0,0 @@
-uci -q set ruleng.ethport=rule
-uci -q set ruleng.ethport.recipe='/etc/ruleng/ethport.json'

ethmngr/files/ethmngr.init

@@ -4,13 +4,12 @@ START=95
 STOP=10
 
 USE_PROCD=1
-PROG=/usr/sbin/csmngr
+PROG=/usr/sbin/ethmngr
 
 start_service() {
 	procd_open_instance
 	procd_set_param command ${PROG}
-#	procd_set_param stderr 1                    #for debugging only
-#	procd_set_param respawn
+	procd_set_param respawn
 	procd_close_instance
 }
 
@@ -18,4 +17,3 @@ reload_service() {
         stop
         start
 }
-

evoice/Makefile

@@ -0,0 +1,75 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=f2477946f9e142d01820b38e32ce98a781e0310e
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +TARGET_iopsys_brcm63xx_arm:bcmkernel +TARGET_iopsys_econet:kmod-voip_driver
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and change the path below to your own git repository.
+define Build/Prepare
+	rsync -av /swdev/bide/evoice_clean/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	TARGET_PLATFORM=BROADCOM
+	export IDIR = $(STAGING_DIR)/usr/include
+	export BDIR = bcm963xx/userspace/private/apps/voice
+	export _XFLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc -I$(IDIR)/bcm963xx/xchg/bos/publicInc -I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+	TARGET_PLATFORM=ECONET
+endif
+
+export TARGET_PLATFORM
+
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=SVrgBcmFxs LIF=cerder DBG=dbg
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=libvoiceservice LIF=cerder DBG=dbg
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,345 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config Capabilities 'Capabilities'
+	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+
+config CapabilitiesCodec 'Codec5'
+	option Codec 'G.729'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'Codec1'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'Codec2'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'Codec3'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'Codec4'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'Codec5'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '3PrefixInfo1'
+	list PrefixList '3PrefixInfo2'
+	list PrefixList '3PrefixInfo3'
+	list PrefixList '3PrefixInfo4'
+	list PrefixList '3PrefixInfo5'
+	list PrefixList '3PrefixInfo6'
+	list PrefixList '3PrefixInfo7'
+	list PrefixList '3PrefixInfo8'
+	list PrefixList '3PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '4PrefixInfo1'
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '4PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicecap

@@ -0,0 +1,38 @@
+# Capabilties are platform dependent. Keep these separated from customer configuration
+ 
+config capabilities_prm 'limits'
+	option MaxCallLogCount '100'
+
+config capabilities_prm 'features'
+	option QIModelsSupported 'G.107'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+	option BitRate '32000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.729'
+	option BitRate '8000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,166 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable 'voice.Network@.Enable'
+   option Registration_Server 'voice.Network@.RegistrarServer'
+   option Outbound_Proxy 'voice.Network@.ProxyServer'
+   option SIP_Port 'voice.Network@.RegistrarServerPort'
+   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
+   option T1 'voice.Network@.TimerT1'
+   option UserAgentDomain 'voice.Network@.UserAgentDomain'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,57 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option SIP_SessTmrEnable '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+