Qos: Read number of queue on target from libqos

this causes problem building for airoha due to libethernet's dependency to xpon_bsp which is selected as =m

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.5
+PKG_VERSION:=3.5.6
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cf4e91ffe0a1d83140fef5b41d16e581e5341cec
+PKG_SOURCE_VERSION:=81450033d98fcdb68911e2148f48d190492090a6
 PKG_MIRROR_HASH:=skip
 endif
 

dslmngr/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.2.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -68,6 +68,10 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
+	$(CP) ./files/common/* $(1)/
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	$(CP) ./files/broadcom/* $(1)/
+endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -0,0 +1,311 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+# ATM #
+check_pvc() {
+	local vpi=$1
+	local vci=$2
+	local ret
+
+	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+check_xtm_list() {
+	local qclass=$1
+	local pcr scr mbs
+	local ret
+
+	case $# in
+		1)
+			pcr=0
+			scr=0
+			mbs=0
+		;;
+		2)
+			pcr=$2
+			scr=0
+			mbs=0
+		;;
+		4)
+			pcr=$2
+			scr=$3
+			mbs=$4
+		;;
+	esac
+
+	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_atm_device() {
+	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
+
+	config_get name $1 name "ATM"
+	config_get vpi $1 vpi "8"
+	config_get vci $1 vci "35"
+	config_get device $1 device "atm0"
+	config_get link_type $1 link_type "eoa"
+	config_get encapsulation $1 encapsulation "llc"
+	config_get qos_class $1 qos_class "ubr"
+	config_get pcr $1 pcr
+	config_get mbs $1 mbs
+	config_get scr $1 scr
+
+	check_pvc $vpi $vci
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret=$?
+
+		if [ "$ret" -eq 0 ]; then
+			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+				ubr)
+					xtmctl operate tdte --add "$qos_class"
+				;;
+				ubr_pcr|ubr+)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				cbr)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				nrtvbr|vbr-nrt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				rtvbr|vbr-rt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				gfr)
+				;;
+				abr)
+				;;
+			esac
+		fi
+
+		case $link_type in # EoA, IPoA, PPPoA, CIP
+			EoA|eoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
+			;;
+			PPPoA|pppoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
+			;;
+			IPoA|ipoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
+			;;
+			CIP|cip)
+			;;
+		esac
+
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret="$?"
+
+		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
+		done
+		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_atm_devices() {
+	local vpi vci rest
+	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
+
+	for i in $vpivci
+	do
+		rest=${i#\/}
+		vpi=${rest%%\/*}
+		vci=${rest#*\/}
+		echo "xtmctl operate conn --delete 1.$vpi.$vci"
+		xtmctl operate conn --delete 1.$vpi.$vci
+		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
+		xtmctl operate conn --deletenetdev 1.$vpi.$vci
+	done
+}
+
+create_atm_devices() {
+	echo "Creating ATM Device(s)"
+	config_load dsl
+	config_foreach configure_atm_device atm-device
+}
+# ATM END #
+
+# PTM #
+check_ptm() {
+	local ret
+	local ptmprio=$1
+	local dslat=$2
+
+	if [ "$ptmprio" -eq 2 ]; then
+		ptmprio="high"
+	else
+		ptmprio="low"
+	fi
+
+	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_ptm_device() {
+	local name device priority portid i
+
+	config_get name $1 name "PTM"
+	config_get device $1 device "ptm0"
+	config_get priority $1 priority 1
+	config_get portid $1 portid 1
+
+	check_ptm $priority $portid
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		xtmctl operate conn --add $portid.$priority
+
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
+		done
+		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
+		xtmctl operate conn --createnetdev $portid.$priority $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_ptm_devices() {
+	local delptm
+	local x=0
+
+	IFS=$'\n'
+	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
+	do
+		if [ $x -eq 1 ]; then
+			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
+			echo "xtmctl operate conn --delete $delptm"
+			xtmctl operate conn --delete $delptm
+			xtmctl operate conn --deletenetdev $delptm
+		fi
+		x=1
+	done
+	unset IFS
+}
+
+create_ptm_devices() {
+	echo "Creating PTM Device(s)"
+	config_load dsl
+	config_foreach configure_ptm_device ptm-device
+}
+# PTM END #
+
+prioritize_arp()
+{
+      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+}
+
+xtm_remove_devices() {
+	remove_atm_devices
+	remove_ptm_devices
+}
+
+xtm_create_devices() {
+	local tpstc="$(xdslctl info --show | grep TPS-TC)"
+	if echo "$tpstc" | grep -q "ATM Mode"; then
+		create_atm_devices
+	elif echo "$tpstc" | grep -q "PTM Mode"; then
+		create_ptm_devices
+	fi
+}
+
+xdsl_configure() {
+	local VDSL=0
+	local GFAST=0
+	local mod=""
+	local modes=""
+	local profile=""
+
+	config_load dsl
+
+	# Modes
+	config_get mode line mode
+	for mod in $mode; do
+		[ $mod == "gdmt" ] && modes="${modes}d"
+		[ $mod == "glite" ] && modes="${modes}l"
+		[ $mod == "t1413" ] && modes="${modes}t"
+		[ $mod == "adsl2" ] && modes="${modes}2"
+		[ $mod == "adsl2p" ] && modes="${modes}p"
+		[ $mod == "annexl" ] && modes="${modes}e"
+		[ $mod == "annexm" ] && modes="${modes}m"
+		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
+		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
+	done
+
+	# VDSL Profiles
+	config_get profile line profile
+	# Capabilities
+	config_get_bool bitswap line bitswap 1
+	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
+	config_get_bool sra line sra 1
+	[ $sra -eq 1 ] && sra="on" || sra="off"
+#	config_get_bool trellis line trellis 1
+	config_get_bool sesdrop line sesdrop 0
+	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
+	# VDSL2 only
+	config_get_bool us0 line us0 1
+	[ $us0 -eq 1 ] && us0="on" || us0="off"
+#	config_get_bool dynamicd line dynamicd 1
+#	config_get_bool dynamicf line dynamicf 1
+	config_get_bool sos line sos 0
+	[ $sos -eq 1 ] && sos="on" || sos="off"
+
+	config_get_bool phyReXmtUs line phyReXmtUs 0
+	config_get_bool phyReXmtDs line phyReXmtDs 1
+	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
+
+	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
+		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	else
+		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+	fi
+
+	if [ $GFAST -eq 1 ]; then
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	fi
+}
+
+xdsl_stop() {
+	# echo "Stopping DSL"
+	# stop causes IRQ issues
+	# xdslctl stop
+	return 0
+}
+
+xdsl_init() {
+	prioritize_arp
+
+	echo "Starting DSL"
+
+	xtmctl start
+	xtmctl operate intf --state 1 enable
+}

dslmngr/files/common/etc/config/dsl

@@ -0,0 +1,53 @@
+# OEM specific parameters
+config oem-parameters 'oem'
+#	option country_code "0000"   # 2 bytes hex
+#	option vendor_id "IO"        # 4 bytes string
+#	option vendor_suffix "0000"  # 2 bytes hex
+#	option sw_version "iopsys"   # 16 bytes string
+#	option serial_nr "00000000"  # 32 bytes string
+
+# DSL Modes
+config dsl-line line
+	list mode gdmt
+	list mode glite
+	list mode t1413
+	list mode adsl2
+	list mode adsl2p
+	list mode annexl
+	list mode annexm
+	list mode vdsl2
+	# VDSL2 profiles
+	list profile 8a
+	list profile 8b
+	list profile 8c
+	list profile 8d
+	list profile 12a
+	list profile 12b
+	list profile 17a
+	list profile 30a
+	option bitswap 1
+	option sra 1
+	option us0 1 # VDSL2 only
+	option sesdrop 0
+	option sos 0
+	option phyReXmtUs 0
+	option phyReXmtDs 1
+
+config atm-device atm0
+	option name 'ATM'
+	option vpi '8'
+	option vci '35'
+	option device atm0
+	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
+	option encapsulation 'llc' # llc, vcmux
+	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+#	option pcr '512'
+#	option scr '256'
+#	option mbs '1024'
+
+config ptm-device ptm0
+	option name 'PTM'
+	option device 'ptm0'
+	option priority '1'
+	option portid '1'
+

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -0,0 +1,7 @@
+[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
+
+. /lib/functions.sh
+include /lib/dsl
+
+xtm_remove_devices
+xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -0,0 +1,7 @@
+if [ "$STATUS" == "up" ]; then
+	ubus call led.dsl set '{"state":"ok"}'
+elif [ "$STATUS" == "down" ]; then
+	ubus call led.dsl set '{"state":"off"}'
+elif [ "$STATUS" == "training" ]; then
+	ubus call led.dsl set '{"state":"alert"}'
+fi

dslmngr/files/common/etc/init.d/dsl

@@ -0,0 +1,48 @@
+#!/bin/sh /etc/rc.common
+
+. /lib/functions.sh
+include /lib/dsl
+
+START=20
+USE_PROCD=1
+
+DSLMNGR=$(which dslmngr)
+
+start_service() {
+	[ -n "$DSLMNGR" ] && {
+		procd_open_instance
+		procd_set_param command "$DSLMNGR"
+		procd_set_param respawn
+		procd_close_instance
+	}
+
+	xdsl_configure
+	xtm_create_devices
+}
+
+stop_service() {
+	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
+
+	xtm_remove_devices
+	xdsl_stop
+}
+
+boot() {
+	local HASADSL="$(db -q get hw.board.hasAdsl)"
+	local HASVDSL="$(db -q get hw.board.hasVdsl)"
+	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
+
+	xdsl_init
+
+	start
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger dsl
+}
+

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.8.0
+PKG_VERSION:=7.2.3
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ddc7b272bec5e3b5c2a216a1f86cd5589a1a4a19
+PKG_SOURCE_VERSION:=c277f89b0791664b7d417a4de34a156fc0aa8ee0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -59,6 +59,10 @@ else ifeq ($(CONFIG_TARGET_airoha),y)
   TARGET_PLATFORM=ECONET
   TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_ipq95xx),y)
+  TARGET_PLATFORM=IPQ95XX
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIPQ95XX
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211

easy-soc-libs/wifi.mk

@@ -18,6 +18,9 @@ endef
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
 endef

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=dc12712af8c4088f7873502ca845e51c68a1ada9
+PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

ethmngr/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.0.1
+PKG_VERSION:=2.1.0
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,10 +37,24 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+define Build/Compile
+endef
+endif
+
 define Package/ethmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
+	$(CP) ./files/common/* $(1)/
+ifneq ($(CONFIG_TARGET_brcmbca),)
+	$(CP) ./files/broadcom/* $(1)/
+else ifneq ($(CONFIG_TARGET_airoha),)
+	$(CP) ./files/airoha/* $(1)/
+else
+	$(CP) ./files/linux/* $(1)/
+endif
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
+endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -0,0 +1,208 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+unset -f switchmgr
+# alias for switchmgr
+switchmgr() {
+	"/userfs/bin/switchmgr" "$@"
+}
+
+unset -f tc3162_get_lan_port
+# get lan port port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_lan_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+
+	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
+	case "${ifname}" in
+	eth0.*)
+		;;
+	*)
+		logger -t "port-management" \
+		"unsupported - ${ifname} is not tc3162 switch port"
+		return 255
+		;;
+	esac
+
+	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
+	[[ -z "${if_idx}" ]] && return 255
+	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
+		logger -t "port-management" \
+		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
+		return 255
+	}
+	let "if_idx=${if_idx}-1"
+	return ${if_idx}
+}
+
+
+unset -f tc3162_get_mapped_port
+# get mapped switch port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_mapped_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+	local prtmap_procfile="/proc/tc3162/eth_portmap"
+	local lan_prt=255
+	local port=255
+	local prtmap_out_line_num=4
+	local prtmap_out_line=""
+	
+	# check "lan port map" marker in portmap output string
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
+
+	tc3162_get_lan_port "${ifname}"
+	let "if_idx=$?"
+	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
+
+	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
+	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+
+	# get and check lan port index from lan portmapping string
+	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
+	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
+
+	# get and check mapped port from lan portmapping string
+	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
+	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
+
+	return ${port}
+}
+
+unset -f get_max_port_speed
+# arg1: port ifname, ex: eth0.1
+get_max_port_speed() {
+	[[ -z "$1" ]] && { echo 0; return; }
+
+	local ifname="$1"
+	local port=255
+	local speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	# tc3162 capability for all ports is 1Gbps
+	speed=1000
+
+	echo $speed
+}
+
+unset -f power_updown
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+power_updown() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local port=255
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	switchmgr phy admin "${port}" "${enabled}"
+}
+
+unset -f set_port_settings
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: 0/1/off/on/..
+# arg6: port eee, ex: 0/1/off/on/..
+# arg7: port pause, ex: 0/1/off/on/..
+set_port_settings() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+	[[ -z "$3" ]] && return
+	[[ -z "$4" ]] && return
+	[[ -z "$5" ]] && return
+	[[ -z "$6" ]] && return
+	[[ -z "$7" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local speed="$3"
+	local duplex="$4"
+	local autoneg=$5
+	local eee="$6"
+	local pause="$7"
+	local port=255
+	local speedmode=1
+	local last_speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+	
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	let "autoneg=$(get_bool "${autoneg}" "-1")"
+	[[ ${autoneg} -eq -1 ]] && return
+
+	let "eee=$(get_bool "${eee}" "-1")"
+	[[ ${eee} -eq -1 ]] && return
+	
+	let "pause=$(get_bool "${pause}" "-1")"
+	[[ ${pause} -eq -1 ]] && return
+	
+	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
+	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+	
+	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
+	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
+		&& last_speed=${speed}
+	
+	switchmgr phy pause "${port}" "${pause}"
+
+	# set speedmode: speed+duplex+autoneg
+# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
+	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
+		switchmgr phy speedmode ${port} "1"
+	else
+		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
+		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
+		switchmgr phy speedmode "${port}" "${speedmode}"
+	fi
+	
+# TODO: implement MAC control register manipulations (mapped ports used) for
+	# eee settings change
+	# separate (tx/rx) pause (flow control) settings change
+	# set speed to 1Gbps separately from autoneg mode
+	
+# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
+	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
+
+	power_updown "${ifname}" ${enabled}
+
+}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -0,0 +1,140 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
+	local speed=1000
+
+	case "$phycap" in
+		10GFD) speed=10000 ;;
+		5GFD) speed=5000 ;;
+		2.5GFD) speed=2500 ;;
+		1GFD|1GHD) speed=1000 ;;
+		100MFD|100MHD) speed=100 ;;
+		10MFD|10MHD) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port name, ex: eth0
+get_port_number() {
+	[ -z "$1" ] && return
+	local ports="0 1 2 3 4 5 6 7"
+	local units="0 1"
+	local port="$1"
+	local ifname
+
+	for unit in $units; do
+		for prt in $ports; do
+			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
+			if [ "$ifname" == "$port" ]; then
+				echo "$unit $prt"
+				return
+			fi
+		done
+	done
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ethctl $ifname phy-power $updown >/dev/null
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	local unitport="$(get_port_number $ifname)"
+	local unit=$(echo $unitport | cut -d ' ' -f 1)
+	local port=$(echo $unitport | cut -d ' ' -f 2)
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	[ "$duplex" == "half" ] && duplex=0 || duplex=1
+	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
+	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
+
+	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
+	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
+	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
+	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
+
+	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
+	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
+
+	if [ "$numofcaps" == "1" ]; then
+		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
+	else
+		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
+		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
+	fi
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+	if [ "$auto" == "on" ]; then
+		# Use ethswctl utility to set pause autoneg
+		# as ethtool is not setting it properly
+		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
+	else
+		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+	fi
+
+	power_updown $ifname $enabled
+}

ethmngr/files/common/etc/init.d/ethmngr

@@ -1,12 +1,15 @@
 #!/bin/sh /etc/rc.common
 
 START=15
+STOP=90
+
 USE_PROCD=1
+PROG=/usr/sbin/ethmngr
 
 . /lib/functions.sh
-include /lib/network
+include /lib/ethernet
 
-configure_ports(){
+configure_ethernet_port(){
 	local cfg=$1
 	local ifname enabled speed duplex autoneg eee pause
 
@@ -24,11 +27,22 @@ configure_ports(){
 }
 
 start_service() {
-	[ -f /lib/network/port.sh ] || return
+	if [ -s /etc/config/ports ]; then
+		config_load ports
+		config_foreach configure_ethernet_port ethport
+	fi
 
-	config_load ports
-	config_foreach configure_ports ethport
-	config_foreach configure_ports sfpport
+	if [ -f $PROG ]; then
+		procd_open_instance
+		procd_set_param command ${PROG}
+		procd_set_param respawn
+		procd_close_instance
+	fi
+}
+
+reload_service() {
+        stop
+        start
 }
 
 service_triggers() {

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -2,7 +2,8 @@
 
 populate_config_from_db() {
 	. /lib/functions.sh
-	include /lib/network
+	. /lib/network/utils.sh
+	include /lib/ethernet
 
 	portorder="$(db -q get hw.board.ethernetPortOrder)"
 	for port in $portorder; do

ethmngr/files/ethmngr.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=95
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-        stop
-        start
-}

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -0,0 +1,95 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
+	local speed=1000
+
+	case "$phycap" in
+		10000*) speed=10000 ;;
+		5000*) speed=5000 ;;
+		2500*) speed=2500 ;;
+		1000*) speed=1000 ;;
+		100*) speed=100 ;;
+		10*) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ip link set dev $ifname $updown
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+
+	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+
+	power_updown $ifname $enabled
+}

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.4
+PKG_VERSION:=9.1.5
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=fb8b5b9da6cadd53a3d12e27af0ed800b149a9f2
+PKG_SOURCE_VERSION:=79284d1f4e16cf6077a7394f0c04a894b83a8a41
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -93,7 +93,8 @@ define Package/icwmp/default/install
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
 	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
 	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp.user
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
 Package/icwmp-openssl/install = $(Package/icwmp/default/install)

icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp.user

@@ -1,133 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-CLASS=""
-OUI=""
-SERIAL=""
-
-get_vivsoi() {
-	# opt125 environment variable has data in below format
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |	 enterprise-number1	  |
-	# |				  |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |   data-len1   |		  |
-	# +-+-+-+-+-+-+-+-+ option-data1  |
-	# /				  /
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-	# |	 enterprise-number2	  |   ^
-	# |				  |   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# |   data-len2   |		  | optional
-	# +-+-+-+-+-+-+-+-+ option-data2  |   |
-	# /				  /   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# ~	       ...		  ~   V
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-
-	#  Enterprise Id  Len  Sub Op  SLen  Data Sub Op  SLen Data	  Sub Op  SLen Data
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-	# |	id    |  n  |	1  |  n1  | D1 |   2  |  n2 | D2 | ... |   6  |  n6 | D6 |
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-
-	local opt125="$1"
-	local len="$2"
-	local ent_id
-
-	#hex-string 2 character=1 Byte
-	# length in hex string will be twice of actual Byte length
-	[ "$len" -gt "8" ] || return
-
-	data="${opt125}"
-	rem_len="${len}"
-	while [ $rem_len -gt 0 ]; do
-		ent_id=${data:0:8}
-		ent_id=$(printf "%d\n" "0x$ent_id")
-
-		if [ $ent_id -ne  3561 ]; then
-			len_val=${data:8:2}
-			data_len=$(printf "%d\n" "0x$len_val")
-			# add 4 byte for ent_id and 1 byte for len
-			data_len=$(( data_len * 2 + 10 ))
-			# move ahead data to next enterprise id
-			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - $data_len ))
-			continue
-		fi
-
-		# read the length of enterprise data
-		len_val=${data:8:2}
-		opt_len=$(printf "%d\n" "0x$len_val")
-		[ $opt_len -eq 0 ] && return
-
-		# populate the option data of enterprise id
-		sub_data_len=$(( opt_len * 2))
-		# starting 10 means ahead of length field
-		sub_data=${data:10:"${sub_data_len}"}
-
-		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${sub_data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-
-			# get the length of suboption
-			sub_opt_len=${sub_data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:${sub_opt_len}}
-
-			# assign the value found in sub option
-			case "${sub_opt_id}" in
-				"4") OUI=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"5") SERIAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"6") CLASS=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-			esac
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
-
-			# update the remaining sub option hex string length
-			sub_data_len=$((sub_data_len - sub_opt_end))
-		done
-
-		break
-	done
-}
-
-config_load cwmp
-config_get_bool enable_cwmp cpe enable 1
-config_get wan_intf cpe default_wan_interface "wan"
-
-if [ "$enable_cwmp" = "0" ]; then
-	return 0
-fi
-
-if [ "${wan_intf}" == "${INTERFACE}" ]; then
-	if [ -n "$opt125" ]; then
-		len=$(printf "$opt125"|wc -c)
-		get_vivsoi "$opt125" "$len"
-	fi
-
-	mkdir -p /var/state
-	touch /var/state/cwmp
-	sec=$(uci -q -c /var/state get cwmp.gatewayinfo)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q -c /var/state add cwmp gatewayinfo)
-		uci -q -c /var/state rename cwmp."${sec}"="gatewayinfo"
-	fi
-
-	uci -q -c /var/state set cwmp.gatewayinfo.class="$CLASS"
-	uci -q -c /var/state set cwmp.gatewayinfo.oui="$OUI"
-	uci -q -c /var/state set cwmp.gatewayinfo.serial="$SERIAL"
-	uci -q -c /var/state commit cwmp
-fi

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=6.0.21
+PKG_VERSION:=7.0.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=29f58120eea9bf3c48fae98a74f0f4c9d3d902a8
+PKG_SOURCE_VERSION:=47c04c502edf441fef9f14307be5f07541614049
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

iop/config

@@ -56,8 +56,7 @@ CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
 
 # EasySoC HAL #
 CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_qosmngr=y
 CONFIG_PACKAGE_wifimngr=y
 
 # Multi-AP #

map-agent/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.10.4.17
+PKG_VERSION:=4.1.0.0
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=098fef903c1e746776f88df3706337b8fc3899ac
+PKG_SOURCE_VERSION:=035a398ae9e23612816cba8eeb8477997135a840
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause

map-controller/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.11.0.24
+PKG_VERSION:=4.1.0.0
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=8944352f648643fa5c72cd216a76695a021b7851
+PKG_SOURCE_VERSION:=473c4a547c34af0f3b09cb7a110e5cff90abc191
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)

port-management/Makefile

@@ -1,31 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=port-management
-PKG_VERSION:=1.1.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPL-2.0-only
-include $(INCLUDE_DIR)/package.mk
-
-define Package/port-management
-  CATEGORY:=Utilities
-  TITLE:=Port management tool
-endef
-
-define Package/port-management/description
-	Port configuration utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/port-management/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,port-management))

qosmngr/Makefile

@@ -27,7 +27,7 @@ define Package/qosmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=QoS Manager
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha||TARGET_iopsys_mediatek) +libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos +!(TARGET_brcmbca||TARGET_airoha):tc-full
 endef
 
 define Package/qosmngr/description
@@ -40,32 +40,17 @@ define Build/Prepare
 endef
 endif
 
-define Package/qosmngr/install/common
+define Package/qosmngr/install
 	$(CP) ./files/common/* $(1)/
-	$(INSTALL_DIR) $(1)/usr
+ifneq ($(CONFIG_TARGET_brcmbca),)
+	$(CP) ./files/broadcom/* $(1)/
+else ifneq ($(CONFIG_TARGET_airoha),)
+	$(CP) ./files/airoha/* $(1)/
+else
+	$(CP) ./files/linux/* $(1)/
+endif
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/qosmngr $(1)/usr/sbin
 endef
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-define Package/qosmngr/install
-	$(CP) ./files/broadcom/* $(1)/
-	$(call Package/qosmngr/install/common,$(1))
-endef
-endif
-
-ifeq ($(CONFIG_TARGET_airoha),y)
-define Package/qosmngr/install
-	$(CP) ./files/airoha/* $(1)/
-	$(call Package/qosmngr/install/common,$(1))
-endef
-endif
-
-ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-define Package/qosmngr/install
-	$(CP) ./files/linux/* $(1)/
-	echo "Honoring the flag mediatek"
-	$(call Package/qosmngr/install/common,$(1))
-endef
-endif
 $(eval $(call BuildPackage,qosmngr))

qosmngr/files/airoha/etc/uci-defaults/60-qos_config_generate

@@ -5,7 +5,7 @@
 ethwan="$(db -q get hw.board.ethernetWanPort)"
 
 populate_no_of_queue(){
-    queue_num=4
+    local queue_num=$(get_no_of_queue "airoha")
 
     # writing no. of queue per port into file and read on classify generate
     if [ ! -d "/tmp/qos" ]; then
@@ -61,4 +61,3 @@ touch /etc/config/qos
 # generate qos queue config
 config_load ports
 config_foreach generate_queue ethport
-

qosmngr/files/airoha/lib/qos/qos.sh

@@ -2,7 +2,7 @@
 # The entrypoint for the QoS setup library
 
 . /lib/functions.sh
-. /lib/network/port.sh
+include /lib/ethernet
 
 . /lib/qos/common/chains.sh
 . /lib/qos/common/chains.ebtables.sh
@@ -25,6 +25,36 @@ configure_qos() {
     configure_classify
 }
 
+get_no_of_queue() {
+	platform_name=$1
+	cpu_model=$2
+
+	if [ -z "$platform_name" ];then
+		return
+	fi
+
+	if [ "$platform_name" == "airoha" ]; then
+		queue_num=4
+		echo "Fix: airohai no_of_queue: $queue_num"
+	elif [ "$platform_name" == "broadcom" ]; then
+		if [[ $cpu_model == "BCM68"* ]]; then
+			queue_num=4
+			echo "Fix: broadcom bcm no_of_queue: $queue_num"
+		elif grep -qE '[0-9]+ archer$' /proc/devices; then
+                	queue_num=4
+			echo "Fix: broadcom arcee no_of_queue: $queue_num"
+		else
+                	queue_num=8
+			echo "Fix: broadcom else no_of_queue: $queue_num"
+		fi
+	elif [ "$platform_name" == "linux" ]; then
+		queue_num=8
+		echo "Fix: linux no_of_queue: $queue_num"
+	fi
+
+	echo $queue_num
+}
+
 reload_qos() {
     local service_name="$1"
 

qosmngr/files/broadcom/etc/uci-defaults/60-qos_config_generate

@@ -4,17 +4,10 @@
 
 ethwan="$(db -q get hw.board.ethernetWanPort)"
 cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
-
-queue_num=8
+queue_num=0
 
 populate_no_of_queue(){
-	case $cpu_model in
-		BCM68*) queue_num=4;;
-	esac
-        if grep -qE '[0-9]+ archer$' /proc/devices; then
-                queue_num=4
-        fi
-
+	queue_num=$(get_no_of_queue "broadcom")
 	# writing no. of queue per port into file and read on classify generate
 	if [ ! -d "/tmp/qos" ]; then
 		mkdir -p "/tmp/qos"

qosmngr/files/broadcom/lib/qos/qos.sh

@@ -1,6 +1,6 @@
 #!/bin/sh
 . /lib/functions.sh
-. /lib/network/port.sh
+include /lib/ethernet
 
 IP_RULE=""
 BR_RULE=""
@@ -642,7 +642,7 @@ handle_ebtables_rules() {
 			*)
 				if [ -n "$protocol" ] || [ -n "$dscp_filter" ]; then
 					ip_version=1 #neither ether_type nor ip address used
-					#ethertype is not configured by user so install 
+					#ethertype is not configured by user so install
 					#both proto ipv4 and ipv6 rule
 					BR6_RULE="$BR_RULE"
 					broute_filter_on_ether_type "IPv4"
@@ -1372,7 +1372,7 @@ reload_qos_service() {
 			fi
 			if [ "$policer" == "true" ]; then
 				reload_qos "policer"
-				# change in policer config may need reconfiguration 
+				# change in policer config may need reconfiguration
 				# of classifier
 				reload_qos "classify"
 			fi
@@ -1383,3 +1383,35 @@ reload_qos_service() {
 	fi
 	cp /etc/config/qos /tmp/qos/qos
 }
+
+get_no_of_queue() {
+	platform_name=$1
+	cpu_model=$2
+
+	if [ -z "$platform_name" ];then
+		return
+	fi
+
+	if [ "$platform_name" == "airoha" ]; then
+		queue_num=4
+		echo "Fix: airohai no_of_queue: $queue_num"
+	elif [ "$platform_name" == "broadcom" ]; then
+		if [[ $cpu_model == "BCM68"* ]]; then
+			queue_num=4
+			echo "Fix: broadcom bcm no_of_queue: $queue_num"
+		elif grep -qE '[0-9]+ archer$' /proc/devices; then
+                	queue_num=4
+			echo "Fix: broadcom arcee no_of_queue: $queue_num"
+		else
+                	queue_num=8
+			echo "Fix: broadcom else no_of_queue: $queue_num"
+		fi
+	elif [ "$platform_name" == "linux" ]; then
+		queue_num=8
+		echo "Fix: linux no_of_queue: $queue_num"
+	fi
+
+	echo $queue_num
+}
+
+

qosmngr/files/linux/etc/uci-defaults/60-qos_config_generate

@@ -4,6 +4,18 @@
 
 ethwan="$(db -q get hw.board.ethernetWanPort)"
 
+populate_no_of_queue(){
+    local queue_num=$(get_no_of_queue "linux")
+
+    # writing no. of queue per port into file and read on classify generate
+    if [ ! -d "/tmp/qos" ]; then
+            mkdir -p "/tmp/qos"
+    fi
+    no_queue_file="/tmp/qos/no_queue_per_port"
+    touch "$no_queue_file"
+    echo $queue_num >"$no_queue_file"
+}
+
 generate_queue(){
 	section="$1"
 
@@ -29,6 +41,8 @@ generate_queue(){
 	uci commit qos
 }
 
+populate_no_of_queue
+
 if [ -s "/etc/config/qos" ]; then
 	if uci -q get qos.@queue[0] >/dev/null; then
 		# return if there is any valid content

qosmngr/files/linux/lib/qos/qos.sh

@@ -70,7 +70,7 @@ handle_queue() {
 	local port_bw="$3"
 	local root="$4"
 	local port_bs="$5"
-
+	local priority=0
 	config_get is_enable "$qid" "enable"
 
 	# no need to configure disabled queues
@@ -127,21 +127,17 @@ handle_queue() {
 
 	# ignore precedence value in case of WRR, broadcom recommends that WRR queue should
 	# always have precedence value set to 0
-	if [ $salg -eq 2 ]; then
-	       order=0
+	if [ $salg -ne 2 ]; then
+	       priority=$order
 	fi
-
-	if [ $salg -eq 2 ]; then
-		tc class add dev $port parent ${root}: classid ${root}:$((order + 1)) cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $order weight $wgt  avpkt 1500 bounded isolated
-	else
-		tc class add dev $port parent ${root}: classid ${root}:$((order + 1)) cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $order  avpkt 1500 bounded isolated
+	if [ $order -ne 0 ]; then
+		if [ $salg -eq 2 ]; then
+			tc class add dev $port parent ${root}: classid ${root}:$order cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $priority weight $wgt  avpkt 1500 bounded isolated
+		else
+			tc class add dev $port parent ${root}: classid ${root}:$order cbq allot $bs bandwidth ${port_bw}kbit rate ${rate}kbit prio $priority  avpkt 1500 bounded isolated
+		fi
+		tc filter add dev $port parent ${root}:0 prio $order handle $order fw classid ${root}:$order
 	fi
-	
-	if [ $order -eq 0 ]; then
-		# By default flowid is targeted to queue 1.
-		tc filter add dev $port parent ${root}:0 protocol ip prio 1 u32 match u32 0 0  flowid ${root}:0
-	fi
-
 	Q_COUNT=$((Q_COUNT + 1))
 }
 
@@ -174,6 +170,10 @@ setup_qos() {
 		ebtables -t broute -I BROUTING -j qos
 	fi
 
+	iptables -w -t mangle -N qos_prerouting
+	ret=$?
+	[ $ret -eq 0 ] && iptables -w -t mangle -I PREROUTING -j qos_prerouting
+
 	iptables -w -t mangle -N qos_forward
 	ret=$?
 	[ $ret -eq 0 ] && iptables -w -t mangle -I FORWARD -j qos_forward
@@ -182,9 +182,9 @@ setup_qos() {
 	ret=$?
 	[ $ret -eq 0 ] && iptables -w -t mangle -I OUTPUT -j qos_output
 
-	iptables -w -t mangle -N qos_postrouting
+	ip6tables -w -t mangle -N qos_prerouting
 	ret=$?
-	[ $ret -eq 0 ] && iptables -w -t mangle -I POSTROUTING -j qos_postrouting
+	[ $ret -eq 0 ] && ip6tables -w -t mangle -I PREROUTING -j qos_prerouting
 
 	ip6tables -t mangle -N qos_forward
 	ret=$?
@@ -194,19 +194,16 @@ setup_qos() {
 	ret=$?
 	[ $ret -eq 0 ] && ip6tables -t mangle -I OUTPUT -j qos_output
 
-	ip6tables -w -t mangle -N qos_postrouting
-	ret=$?
-	[ $ret -eq 0 ] && ip6tables -w -t mangle -I POSTROUTING -j qos_postrouting
 }
 
 flush_chains() {
         echo "iptables -w -t mangle -F qos_forward" > /tmp/qos/classify.iptables
         echo "iptables -w -t mangle -F qos_output" >> /tmp/qos/classify.iptables
-        echo "iptables -w -t mangle -F qos_postrouting" >> /tmp/qos/classify.iptables
+	echo "iptables -w -t mangle -F qos_prerouting" >> /tmp/qos/classify.iptables
 
         echo "ip6tables -w -t mangle -F qos_forward" > /tmp/qos/classify.ip6tables
         echo "ip6tables -w -t mangle -F qos_output" >> /tmp/qos/classify.ip6tables
-        echo "ip6tables -w -t mangle -F qos_postrouting" >> /tmp/qos/classify.ip6tables
+	echo "ip6tables -w -t mangle -F qos_prerouting" >> /tmp/qos/classify.ip6tables
 }
 
 init_iptables_rule() {
@@ -214,7 +211,7 @@ init_iptables_rule() {
 }
 
 iptables_filter_intf() {
-        IP_RULE="$IP_RULE -o $1"
+        IP_RULE="$IP_RULE -i $1"
 }
 
 iptables_filter_proto() {
@@ -262,7 +259,7 @@ iptables_set_dscp_mark() {
 }
 
 iptables_set_traffic_class() {
-        IP_RULE="$IP_RULE  -j CLASSIFY --set-class ${MAJOR}:$1"
+        IP_RULE="$IP_RULE  -j MARK --set-mark $1"
 }
 
 append_rule_to_mangle_table() {
@@ -385,14 +382,13 @@ handle_iptables_rules() {
 
         #write iptables rule for dscp marking
         [ -n "$IP_RULE" -a -n "$dscp_mark" ] && append_rule_to_mangle_table "qos_forward" $ip_version
-
         if [ -n "$IP_RULE" -a -n "$traffic_class" ]; then
                 if [ "$ifname" == "lo" ]; then
                         #write iptables rule for putting WAN directed internal packets in different queue
                         append_rule_to_mangle_table "qos_output" $ip_version
                 else
                         #write iptables rule for putting WAN directed LAN packets in different queue
-                        append_rule_to_mangle_table "qos_postrouting" $ip_version
+                        append_rule_to_mangle_table "qos_prerouting" $ip_version
                 fi
         fi
 }
@@ -514,11 +510,6 @@ handle_classify() {
 	local corder_file="/tmp/qos/classify.order"
 	while read -r line; do
 		line_cid=$(echo $line | cut -d '_' -f 2)
-		config_get is_enable "$line_cid" "enable"
-		# no need to configure disabled classify rules
-		if [ "$is_enable" == '0' ]; then
-			continue
-		fi
                 handle_iptables_rules $line_cid
                 handle_policer_rules $line_cid
         done < "$corder_file"
@@ -526,17 +517,16 @@ handle_classify() {
 
 configure_classify() {
         #processing classify section
+        rm -f /tmp/qos/classify.iptables
+        rm -f /tmp/qos/classify.ip6tables
 	rm -f /tmp/qos/classify.order
-	rm -f /tmp/qos/tmp_classify.order
-	rm -f /tmp/qos/classify.iptables
-	rm -f /tmp/qos/classify.ip6tables
 
         # create files that will contain the rules if not present already
         mkdir -p /tmp/qos/
         touch /tmp/qos/classify.iptables
         touch /tmp/qos/classify.ip6tables
-        touch /tmp/qos/classify.order
-        touch /tmp/qos/tmp_classify.order
+	touch /tmp/qos/classify.order
+
 	flush_chains
 
         # Load UCI file
@@ -565,22 +555,22 @@ pre_configure_queue() {
 	done
 }
 
-get_link_rate() {                     
-        intf="$1"              
-        speed=0   
-        config_load ports               
+get_link_rate() {
+        intf="$1"
+        speed=0
+        config_load ports
         get_speed() {
-                psid="$1"                     
+                psid="$1"
                 iname="$2"
-                config_load ports             
+                config_load ports
                 config_get ifname "$psid" "ifname"
                 if [ "$ifname" == "$iname" ]; then
                         config_get speed "$psid" "speed"
                 fi
-        }                                
-        config_foreach get_speed ethport $intf           
-        echo "$speed"           
-}                   
+        }
+        config_foreach get_speed ethport $intf
+        echo "$speed"
+}
 
 configure_queue() {
 	qdisc_idx=0
@@ -667,6 +657,35 @@ configure_policer() {
         echo $POLICER_COUNT > /tmp/qos/max_policer_inst
 }
 
+get_no_of_queue() {
+	platform_name=$1
+	cpu_model=$2
+
+	if [ -z "$platform_name" ];then
+		return
+	fi
+
+	if [ "$platform_name" == "airoha" ]; then
+		queue_num=4
+		echo "Fix: airohai no_of_queue: $queue_num"
+	elif [ "$platform_name" == "broadcom" ]; then
+		if [[ $cpu_model == "BCM68"* ]]; then
+			queue_num=4
+			echo "Fix: broadcom bcm no_of_queue: $queue_num"
+		elif grep -qE '[0-9]+ archer$' /proc/devices; then
+                	queue_num=4
+			echo "Fix: broadcom arcee no_of_queue: $queue_num"
+		else
+                	queue_num=8
+			echo "Fix: broadcom else no_of_queue: $queue_num"
+		fi
+	elif [ "$platform_name" == "linux" ]; then
+		queue_num=8
+		echo "Fix: linux no_of_queue: $queue_num"
+	fi
+
+	echo $queue_num
+}
 
 configure_qos() {
 	pre_configure_queue

wfa-capi/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfa-capi
-PKG_VERSION:=1.1.3
+PKG_VERSION:=2.0.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=64d9101c8e4930cbd3fe6ce471fb4cfd2b9b80dc
+PKG_SOURCE_VERSION:=3e671db8f567b19c109fc13b25bc571c4c73a962
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfa-capi.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

wifimngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifimngr
-PKG_VERSION:=14.3.2
+PKG_VERSION:=15.0.3
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b8cd9f543756f49a4da2d02cce45094f1544d920
+PKG_SOURCE_VERSION:=4ab6a59e1666581a96bde393f522cc9301cbf78d
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz