map-agent: traffic_separation: only handle layer3 if controller is on same device

This reverts commit a316b74555.

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.4
+PKG_VERSION:=6.8.9.25
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=ebe5137382756175f796082b80a977e099573d47
+PKG_SOURCE_VERSION:=e87b25b08294c608aef1e73d1268b35073097592
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -142,8 +142,10 @@ define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
 	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
 endef
 
 define Package/libbbfdm/default/prerm

bulkdata/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.3
+PKG_VERSION:=2.0.3.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
+PKG_SOURCE_VERSION:=33a6648de9ee0af33c44518656b56b0a30b6c1ab
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.2
+PKG_VERSION:=3.5.5
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ffda80f40b5703f07570a2892522d5dded84b63a
+PKG_SOURCE_VERSION:=cf4e91ffe0a1d83140fef5b41d16e581e5341cec
 PKG_MIRROR_HASH:=skip
 endif
 

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.4.45
+PKG_VERSION:=6.4.52
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b6baf5a2c1213230651912bd9141f1cee02e500a
+PKG_SOURCE_VERSION:=822e9a50790970d14db254ffe3d7464709bcd3ca
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -38,32 +38,26 @@ endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
-export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
@@ -93,7 +87,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)

endptmngr/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
+PKG_VERSION:=0.7
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=7d43e471f0ffc4a54eb2ac35eced4b72fca4dafb
+PKG_SOURCE_VERSION:=dc12712af8c4088f7873502ca845e51c68a1ada9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -30,7 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BRCM_SDK_VER_504021
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk

evoice/Makefile

@@ -1,102 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.5
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=9a2f547c7c3c8d67928c1ed7fbca538e59088c2a
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl\
-		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
-		+TARGET_iopsys_econet:kmod-voip_driver\
-		+TARGET_iopsys_econet:voip_app
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,360 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config Capabilities 'Capabilities'
-	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
-
-config CapabilitiesCodec 'Codec1'
-	option Codec 'G.711ALaw'
-	option BitRate '64000'
-	option PacketizationPeriod '20,30'
-	option SilenceSupression '1'
-
-config CapabilitiesCodec 'Codec2'
-	option Codec 'G.711MuLaw'
-	option BitRate '64000'
-	option PacketizationPeriod '20,30'
-	option SilenceSupression '1'
-
-config CapabilitiesCodec 'Codec3'
-	option Codec 'G.726'
-	option BitRate '32000'
-	option PacketizationPeriod '20,30'
-	option SilenceSupression '0'
-	
-config CapabilitiesCodec 'Codec4'
-	option Codec 'G.722'
-	option BitRate '64000'
-	option PacketizationPeriod '20,30'
-	option SilenceSupression '0'
-	
-config CapabilitiesCodec 'Codec4'
-	option Codec 'G.729'
-	option BitRate '8000'
-	option PacketizationPeriod '20,30'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'Codec1'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'Codec2'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'Codec3'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'Codec4'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'Codec5'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '3PrefixInfo1'
-	list PrefixList '3PrefixInfo2'
-	list PrefixList '3PrefixInfo3'
-	list PrefixList '3PrefixInfo4'
-	list PrefixList '3PrefixInfo5'
-	list PrefixList '3PrefixInfo6'
-	list PrefixList '3PrefixInfo7'
-	list PrefixList '3PrefixInfo8'
-	list PrefixList '3PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '4PrefixInfo1'
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '4PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,167 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable 'voice.Network@.Enable'
-   option Registration_Server 'voice.Network@.RegistrarServer'
-   option Outbound_Proxy 'voice.Network@.ProxyServer'
-   option SIP_Port 'voice.Network@.RegistrarServerPort'
-   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
-   option T1 'voice.Network@.TimerT1'
-   option UserAgentDomain 'voice.Network@.UserAgentDomain'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,57 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option SIP_SessTmrEnable '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

gryphon-led-module/Makefile

@@ -44,17 +44,13 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	MODULES_SUBDIR:=lib/modules/4.19.225
+	MODULES_SUBDIR:=lib/modules/4.19.183
 	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
 		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=8.4.21
+PKG_VERSION:=8.4.25.10
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=62a5eab3a495b07a4f714d608e7428354cdaad36
+PKG_SOURCE_VERSION:=cb601366e6a91db532ba7d577f653a2b86c4a479
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -22,11 +22,6 @@ PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_FIXUP:=autoreconf
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_CWMP_ACS_MULTI \
-	CONFIG_CWMP_ACS_HDM \
-	CONFIG_CWMP_DEBUG \
-	CONFIG_CWMP_DEVEL_DEBUG
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -38,20 +33,10 @@ define Package/icwmp/default
   DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
 endef
 
-define Package/icwmp/config
-	source "$(SOURCE)/Config_cwmp.in"
-endef
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE \
 	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
 
-define Package/icwmp
-  $(Package/icwmp/default)
-  TITLE += (internal)
-  VARIANT:=internal
-endef
-
 define Package/icwmp-openssl
   $(Package/icwmp/default)
   TITLE += (openssl)
@@ -88,16 +73,6 @@ ifeq ($(BUILD_VARIANT),mbedtls)
 CONFIGURE_ARGS += --enable-libmbedtls
 endif
 
-ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
-CONFIGURE_ARGS += \
-	--enable-acs=multi
-endif
-
-ifeq ($(CONFIG_CWMP_ACS_HDM),y)
-CONFIGURE_ARGS += \
-	--enable-acs=hdm
-endif
-
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -128,7 +103,6 @@ Package/icwmp-openssl/install = $(Package/icwmp/default/install)
 Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
 Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
-$(eval $(call BuildPackage,icwmp))
 $(eval $(call BuildPackage,icwmp-openssl))
 $(eval $(call BuildPackage,icwmp-wolfssl))
 $(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/config/cwmp

@@ -17,6 +17,7 @@ config acs 'acs'
 config cpe 'cpe'
 	option enable '1'
 	option default_wan_interface 'wan'
+	option default_lan_interface 'lan'
 	option log_to_console 'disable'
 	option log_to_file 'disable'
 	# log_severity: INFO (Default)	

icwmp/files/etc/icwmpd/update.sh

@@ -1,104 +1,27 @@
 #!/bin/sh
+. /lib/functions.sh
 
 log() {
 	echo "$@" |logger -t cwmp.update -p info
 }
 
 handle_icwmp_update() {
-	local defwan vendorspecinf update
-	local bootup_start
+	local cwmp_enable
+	config_load cwmp
 
-	bootup_start="${1:-0}"
-	update="0"
-	defwan="$(uci -q get cwmp.cpe.default_wan_interface)"
-	vendorspecinf="$(ifstatus "${defwan}" | jsonfilter -e "@.data.vendorspecinf")"
-
-	log "Handling dhcp option value [${vendorspecinf}]"
-	[ -n "$vendorspecinf" ] && {
-		local url old_url
-		local prov_code old_prov_code
-		local min_wait_interval old_min_wait_interval
-		local retry_interval_multiplier old_retry_interval_multiplier
-
-		old_url="$(uci -q get cwmp.acs.dhcp_url)"
-		old_prov_code="$(uci -q get cwmp.cpe.dhcp_provisioning_code)"
-		old_min_wait_interval="$(uci -q get cwmp.acs.dhcp_retry_min_wait_interval)"
-		old_retry_interval_multiplier="$(uci -q get cwmp.acs.dhcp_retry_interval_multiplier)"
-
-		case $vendorspecinf in
-			http://*|https://*)
-					url="${vendorspecinf}"
-				;;
-			*)
-				for optval in $vendorspecinf; do
-				        case $optval in
-				                1=*)
-				                        url="$(echo "$optval" | cut -d"=" -f2-)"
-				                ;;
-				                2=*)
-				                        prov_code="$(echo "$optval" | cut -d"=" -f2-)"
-				                ;;
-				                3=*)
-				                        min_wait_interval="$(echo "$optval" | cut -d"=" -f2-)"
-				                ;;
-				                4=*)
-				                        retry_interval_multiplier="$(echo "$optval" | cut -d"=" -f2-)"
-				                ;;
-				        esac
-				done
-			;;
-		esac
-
-		if [ -n "$url" ]; then
-			if [ "${url}" != "${old_url}" ]; then
-				log "## icwmp url[${old_url}] changed to [${url}]"
-				uci -q set cwmp.acs.dhcp_url="$url"
-				update=1
-			fi
-		fi
-		if [ -n "$prov_code" ]; then
-			if [ "${prov_code}" != "${old_prov_code}" ]; then
-				log "## icwmp prov_code[${old_prov_code}] changed to [${prov_code}]"
-				uci -q set cwmp.cpe.dhcp_provisioning_code="$prov_code"
-				update=1
-			fi
-		fi
-		if [ -n "$min_wait_interval" ]; then
-			if [ "${min_wait_interval}" != "${old_min_wait_interval}" ]; then
-				log "## icwmp min_wait_interval[${old_min_wait_interval}] changed to [${min_wait_interval}]"
-				uci -q set cwmp.acs.dhcp_retry_min_wait_interval="$min_wait_interval"
-				update=1
-			fi
-		fi
-		if [ -n "$retry_interval_multiplier" ]; then
-			if [ "${retry_interval_multiplier}" != "${old_retry_interval_multiplier}" ]; then
-				log "## icwmp retry_interval_multiplier[${old_retry_interval_multiplier}] changed to [${retry_interval_multiplier}]"
-				uci -q set cwmp.acs.dhcp_retry_interval_multiplier="$retry_interval_multiplier"
-				update=1
-			fi
-		fi
-	}
-
-	if [ "${bootup_start}" -eq "1" ]; then
-		# if called at boot up then no need to reload the service, since it will start after
-		uci commit cwmp
+	config_get_bool cwmp_enable cpe enable 1
+	if [ "$cwmp_enable" = "0" ]; then
 		return 0
 	fi
 
-	# In case of update restart icwmp
-	if [ "${update}" -eq "1" ]; then
-		log "CWMP uci changes, reload cwmp with uci commit"
-		ubus call uci commit '{"config":"cwmp"}'
-	else
-		status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
-		if [ "$status" = "failure" ] || [ "$status" = "" ]; then
-			log "Trigger out of bound inform, since last inform status was failure"
-			ubus -t 10 call tr069 inform >/dev/null 2>&1
-			# Handle timeout or tr069 object not found
-			if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
-				log "Restarting icwmp tr069 object"
-				/etc/init.d/icwmpd restart
-			fi
+	status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
+	if [ "$status" != "running" ]; then
+		log "Trigger out of bound inform, since last inform status was failure"
+		ubus -t 10 call tr069 inform >/dev/null 2>&1
+		# Handle timeout or tr069 object not found
+		if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
+			log "Restarting icwmp tr069 object"
+			/etc/init.d/icwmpd restart
 		fi
 	fi
 }

icwmp/files/etc/init.d/icwmpd

@@ -71,6 +71,206 @@ enable_dhcp_option43() {
 	fi
 }
 
+convert_to_hex() {
+	local val=""
+	local optval="${1}"
+	OPTIND=1
+	while getopts ":" opt "-$optval"
+	do
+		temp=$(printf "%02X" "'${OPTARG:-:}")
+		val="${val}:${temp}"
+	done
+
+	echo "${val}"
+}
+
+configure_send_op125() {
+	local sendopt="${1}"
+	local intf="${2}"
+	local uci="${3}"
+	local hex_oui=""
+	local hex_serial=""
+	local hex_class=""
+	local oui_len=0
+	local serial_len=0
+	local class_len=0
+
+	if [ "${uci}" = "network" ]; then
+		local opt125="125:00:00:0D:E9"
+	else
+		local opt125="125,00:00:0D:E9"
+	fi
+
+	config_get oui cpe manufacturer_oui ""
+	if [ -z "${oui}" ]; then
+		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
+	fi
+
+	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+	config_get serial cpe serial_number ""
+	if [ -z "${serial}" ]; then
+		serial=$(db -q get device.deviceinfo.SerialNumber)
+	fi
+
+	config_get class cpe product_class ""
+	if [ -z "${class}" ]; then
+		class=$(db -q get device.deviceinfo.ProductClass)
+	fi
+
+	oui_len=$(echo -n "${oui}" | wc -m)
+	serial_len=$(echo -n "${serial}" | wc -m)
+	class_len=$(echo -n "${class}" | wc -m)
+
+	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
+		return 0
+	fi
+
+	opt125_len=$((oui_len + serial_len + class_len))
+	if [ ${class_len} -gt 0 ]; then
+		opt125_len=$((opt125_len + 6))
+	else
+		opt125_len=$((opt125_len + 4))
+	fi
+
+	hex_opt125_len=$(printf "%02X" "${opt125_len}")
+	opt125="${opt125}:${hex_opt125_len}"
+	hex_oui=$(convert_to_hex "${oui}")
+	if [ -z "${hex_oui}" ]; then
+		return 0
+	fi
+
+	hex_oui_len=$(printf "%02X" "${oui_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
+	else
+		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
+	fi
+
+	hex_serial=$(convert_to_hex "${serial}")
+	if [ -z "${hex_serial}" ]; then
+		return 0
+	fi
+
+	hex_serial_len=$(printf "%02X" "${serial_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
+	else
+		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
+	fi
+
+	if [ ${class_len} -gt 0 ]; then
+		hex_class=$(convert_to_hex "${class}")
+		if [ -z "${hex_class}" ]; then
+			return 0
+		fi
+
+		hex_class_len=$(printf "%02X" "${class_len}")
+		if [ "${uci}" = "network" ]; then
+			opt125="${opt125}:03:${hex_class_len}${hex_class}"
+		else
+			opt125="${opt125}:06:${hex_class_len}${hex_class}"
+		fi
+	fi
+
+
+	if [ "${uci}" = "network" ]; then
+		new_send_opt="$sendopt $opt125"
+		uci -q set network.$intf.sendopts="$new_send_opt"
+	else
+		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
+	fi
+}
+
+enable_dnsmasq_option125() {
+	local lan="${1}"
+	local send125_present=0
+	local opt125="125,"
+
+	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
+	if [ "${proto}" = "server" ]; then
+		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
+
+		for sopt in $opt_list; do
+			if [[ "$sopt" == "$opt125"* ]]; then
+				send125_present=1
+				break
+			fi
+		done
+
+		if [ ${send125_present} -eq 0 ]; then
+			configure_send_op125 "" "${lan}" "dhcp"
+			ubus call uci commit '{"config":"dhcp"}'
+		fi
+	fi
+}
+
+enable_disable_dhcp_option125() {
+	local wan="${1}"
+	local action="${2}"
+
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local sendopts="$(uci -q get network.$wan.sendopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local newreqopts=""
+	local newsendopts=""
+	local req125_present=0
+	local send125_present=0
+	local network_uci_update=0
+	local opt125="125:"
+
+	for ropt in $reqopts; do
+		case $ropt in
+			125) req125_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	for sopt in $sendopts; do
+		if [[ "$sopt" == "$opt125"* ]]; then
+			send125_present=1
+			break
+		fi
+	done
+
+	if [ "${proto}" == "dhcp" ]; then
+		if [ "${action}" == "enable" ]; then
+			if [ ${req125_present} -eq 0 ]; then
+				newreqopts="$reqopts 125"
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+
+			if [ ${send125_present} -eq 0 ]; then
+				configure_send_op125 "${sendopts}" "${wan}" "network"
+				network_uci_update=1
+			fi
+		else
+			if [ ${req125_present} -eq 1 ]; then
+				newreqopts=$(echo ${reqopts/125/})
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+
+			if [ ${send125_present} -eq 1 ]; then
+				for sopt in $sendopts; do
+					if [[ "$sopt" == "$opt125"* ]]; then
+						newsendopts=$(echo ${sendopts/"${sopt}"/})
+						uci -q set network.$wan.sendopts="$newreqopts"
+						network_uci_update=1
+						break
+					fi
+				done
+			fi
+		fi
+	fi
+
+	if [ ${network_uci_update} -eq 1 ]; then
+		uci commit network
+		ubus call network reload
+	fi
+}
+
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -113,6 +313,8 @@ copy_cwmp_varstate_files_to_etc() {
 	fi
 
 	if [ -f /var/state/cwmp ]; then
+		uci -q -c /var/state delete cwmp.sess_status
+		uci -q -c /var/state commit cwmp
 		cp -f /var/state/cwmp /etc/icwmpd/
 	fi
 
@@ -173,10 +375,13 @@ validate_defaults() {
 		return 1;
 	}
 
+	ssl_capath="${ssl_capath%/}"
 	# Put the cert pem file in keep list
 	if [ -d "${ssl_capath}" ]; then
-		if ! grep "${ssl_capath}" /lib/upgrade/keep.d/icwmp; then
+		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
 			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
 		fi
 	fi
 
@@ -194,11 +399,20 @@ boot() {
 	config_load cwmp
 	config_get dhcp_discovery acs dhcp_discovery "0"
 
+	config_get wan_interface cpe default_wan_interface "wan"
 	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
 		# Set dhcp option 43 if not already configured
-		config_get wan_interface cpe default_wan_interface "wan"
 		enable_dhcp_option43 "${wan_interface}"
-		/etc/icwmpd/update.sh 1
+	fi
+
+	config_get lan_interface cpe default_lan_interface ""
+	if [ -n "${lan_interface}" ]; then
+		# Set dhcp_option 125 if not already configured
+		enable_disable_dhcp_option125 "${wan_interface}" "enable"
+		enable_dnsmasq_option125 "${lan_interface}"
+	else
+		# Remove dhcp option 125 if exists
+		enable_disable_dhcp_option125 "${wan_interface}" "disable"
 	fi
 	
 	config_get ssl_capath acs ssl_capath
@@ -212,14 +426,11 @@ boot() {
 
 start_service() {
 	local enable_cwmp
-	local wan_interface
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
-	config_get wan_interface cpe default_wan_interface "wan"
 
-	if [ "$enable_cwmp" = "0" ] || [ "$enable_cwmp" = "false" ]; then
-		log "CWMP is not enabled"
+	if [ "$enable_cwmp" = "0" ]; then
 		return 0
 	fi
 
@@ -251,10 +462,32 @@ service_stopped()
 	copy_cwmp_varstate_files_to_etc
 }
 
+stop_service()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
 reload_service() {
-	log "Reloading CWMP client"
-	ubus -t 1 call tr069 command '{"command":"reload"}'
-	if [ "$?" -ne "0" ]; then
+	local ret
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+
+	ret="0"
+	if [ "$enable_cwmp" = "0" ]; then
+		stop
+		start
+		return 0
+	fi
+
+	status="$(ubus -t 1 call tr069 status |jsonfilter -qe '@.cwmp.status')"
+	ret="$?"
+	if [ "$status" = "up" ]; then
+		ubus -t 1 call tr069 command '{"command":"reload"}'
+		ret="$?"
+	fi
+
+	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
 		log "Restarting CWMP client"
 		stop
 		start

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,7 +1,11 @@
+#!/bin/sh
+
+. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
+config_load cwmp
 
 # Get Manufacturer OUI.
-oui=$(uci -q get cwmp.cpe.manufacturer_oui)
+config_get oui cpe manufacturer_oui ""
 if [ -z "${oui}" ]; then
 	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
 fi
@@ -9,24 +13,29 @@ fi
 oui=$(echo "${oui}" | tr 'a-f' 'A-F')
 
 # Get system serial number.
-serial=$(uci -q get cwmp.cpe.serial_number)
+config_get serial cpe serial_number ""
 if [ -z "${serial}" ]; then
 	serial=$(db -q get device.deviceinfo.SerialNumber)
 fi
 
 # Get userid values
-acs_userid=$(uci -q get cwmp.acs.userid)
-cpe_userid=$(uci -q get cwmp.cpe.userid)
+config_get acs_userid acs userid ""
+config_get cpe_userid cpe userid ""
 
 # Only set if they are empty
-if [ -z "$acs_userid" ]
-then
+if [ -z "${acs_userid}" ]; then
     uci -q set cwmp.acs.userid="${oui}-${serial}"
 fi
 
-if [ -z "$cpe_userid" ]
-then
+if [ -z "${cpe_userid}" ]; then
     uci -q set cwmp.cpe.userid="${oui}-${serial}"
 fi
 
+# Fix the cwmp.cpe.enable parameter
+# set default to 1 if not defined
+config_get enable_cwmp cpe enable ""
+if [ -z "${enable_cwmp}" ]; then
+    uci -q set cwmp.cpe.enable="1"
+fi
+
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1 +1,2 @@
 /var/run/icwmpd/icwmpd_backup_session.xml
+/etc/icwmpd/cwmp

ieee1905/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2021-2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.9.4
+PKG_VERSION:=4.10.28
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a8f98ec5532310eb4e0313bb9037b5cd292d34a4
+PKG_SOURCE_VERSION:=e10385f117bc20a8d16f1b57ad4f86d4a98552c0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+
+BMAC=$(db -q get hw.board.basemac)
+BMAC=${BMAC//:/}
+BMAC=${BMAC// /}
+BMAC=$(printf "%12.12X" $((0x$BMAC)))
+
+[ "$BMAC" == "" ] && exit 1
+
+LMAC=$((0x$BMAC & 0xfeffffffffff))
+LMAC=$(($LMAC | 0x020000000000))
+LMAC=$(printf "%12.12X" $LMAC)
+LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
+
+mac=$(uci -q get ieee1905.ieee1905.macaddress)
+
+[ "$mac" != "" ] && exit 0
+
+uci set ieee1905.ieee1905.macaddress="$LMAC"
+uci commit ieee1905
+

ieee1905/files/etc/uci-defaults/31-ifname-list-to-option

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+config_load ieee1905
+
+list_to_ifname() {
+	local section=$1
+
+	config_get ifname $section ifname	# get list as space separated values
+
+	uci del ieee1905.${section}.ifname	# delete entry
+	uci set ieee1905.${section}.ifname="$ifname"	# writeback entry as option
+}
+
+config_foreach list_to_ifname al-iface
+

iop/config

@@ -133,6 +133,7 @@ CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
 CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_ip-bridge=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y

iop/scripts/feeds_update.sh

@@ -2,54 +2,57 @@
 
 function feeds_update {
 
-	developer=0
-	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
-		case $opt in
-		n)
-			override=0
-			;;
-		esac
-	done
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
-	fi
+    cp .config .genconfig_config_bak
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
 	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-	fi
+    fi
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
+    # targets need to be installed explicitly
+    for target in $(ls ./feeds/targets)
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# install all packages
-	./scripts/feeds install -a
+    # install all packages
+    ./scripts/feeds install -a
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	cp .genconfig_config_bak .config
-	make defconfig
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -328,7 +328,6 @@ function genconfig {
 			subtarget="en7562"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config

iop/scripts/genconfig_min.sh

@@ -319,7 +319,6 @@ function genconfig_min {
 			subtarget="en7562"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config

map-agent/Config.in

@@ -13,5 +13,22 @@ config AGENT_ISLAND_PREVENTION
 config AGENT_EASYMESH_R2_CERT
 	bool "Compile for WFA test bed"
 
+
+config AGENT_EASYMESH_VENDOR_EXT
+	bool "Enable extra features through Easymesh vendor extension"
+	default y
+
+config AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	string
+	default "\\\\x11\\\\x22\\\\x33"
+
+config AGENT_EASYMESH_VENDOR_EXT_OUI
+	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
+	default AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	help
+	Extra features not covered by the base Easymesh specification can be
+	enabled through AGENT_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
+	through which such features would be exposed.
+
 endmenu
 endif

map-agent/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.9.0.0
+PKG_VERSION:=2.10.2.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=c3887ca931d4e7fb6f773b4d71b4e6164f9f0372
+PKG_SOURCE_VERSION:=4ed3f9bf0743086a85e1b7cf49c47eb49ab05015
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
@@ -28,7 +28,7 @@ define Package/map-agent
   CATEGORY:=Utilities
   TITLE:=WiFi multi-AP Agent (EasyMesh R2)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +map-plugin
+	  +map-plugin +ip-bridge
 endef
 
 
@@ -70,6 +70,12 @@ ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
 TARGET_CFLAGS += -DEASYMESH_R2_CERT
 endif
 
+ifeq ($(CONFIG_AGENT_EASYMESH_VENDOR_EXT),y)
+TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_AGENT_EASYMESH_VENDOR_EXT_OUI)\\\"
+TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT
+endif
+
+
 MAKE_PATH:=src
 
 define Package/map-agent/install

map-agent/files/etc/config/mapagent

@@ -6,6 +6,8 @@ config agent 'agent'
 	option netdev 'wlan'
 	option island_prevention '0'
 	option eth_onboards_wifi_bhs '0'
+	option ap_follow_sta_dfs '0'
+	option guest_isolation '0'
 #	option controller_macaddr '0a:1b:2c:3d:4e:50'
 
 config dynamic_backhaul

map-agent/files/etc/init.d/mapagent

@@ -10,53 +10,6 @@ IS_CFG_VALID=1
 MAP_DEV="map_dev"
 MAP_IF="map"
 
-create_map() {
-	ip link add lei type veth peer name lei_map 2>/dev/null
-	ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-
-	uci -q set network.${MAP_DEV}=device
-	uci -q set network.${MAP_DEV}.name=br-map
-	uci -q set network.${MAP_DEV}.type=bridge
-
-	uci -q show network.${MAP_DEV}.ports | grep -q lei_map || {
-		uci -q add_list network.${MAP_DEV}.ports='lei_map'
-	}
-
-	uci -q set network.${MAP_IF}=interface
-	uci -q set network.${MAP_IF}.device=br-map
-	uci -q set network.${MAP_IF}.is_lan=1
-
-	uci -q show network.br_lan.ports | grep -q lei_lan || {
-		uci -q add_list network.br_lan.ports="lei_lan"
-	}
-
-	uci -q set mapagent.agent.al_bridge=br-map
-
-	uci -q commit
-
-	ubus call network reload
-	ubus -t 5 wait_for network.interface.map
-
-	brctl addif br-map lei_map 2>/dev/null
-	brctl addif br-lan lei_lan 2>/dev/null
-
-	ip link set lei up 2>/dev/null
-	ip link set lei_map up 2>/dev/null
-	ip link set lei_lan up 2>/dev/null
-}
-
-remove_map() {
-	ip link delete ${MAP_VETH} &>/dev/null
-
-	uci -q delete network.${MAP_DEV}
-	uci -q delete network.${MAP_IF}
-
-	uci -q set mapagent.agent.al_bridge=br-lan
-
-	uci -q commit
-
-	ubus call network reload
-}
 
 start_dynbhd_service() {
 	rm -f /tmp/multiap.backhaul
@@ -116,7 +69,7 @@ validate_ap_section() {
 	uci_validate_section mapagent $section "${1}" \
 			'ifname:string' \
 			'device:string' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'enabled:bool:true' \
 			'onboarded:bool:false' \
 			'ssid:string' \
@@ -229,10 +182,6 @@ start_service() {
 	config_get_bool enabled agent enabled 1
 	[ "$enabled" -eq 0 ] && return 1
 
-	local ts
-	config_get_bool ts agent vlan_segregation 0
-	[ "$ts" -eq 1 ] && create_map #|| remove_map
-
 	procd_open_instance
 	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
@@ -241,10 +190,6 @@ start_service() {
 	procd_close_instance
 }
 
-#stop_service() {
-#	remove_map
-#}
-
 service_triggers()
 {
 	procd_add_reload_trigger "mapagent"

map-agent/files/etc/uci-defaults/991-map-agent-unset-pvid

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+unset_pvid() {
+	local section=$1
+
+	uci -q set mapagent.${section}.pvid="0"
+}
+
+config_load mapagent
+
+config_foreach unset_pvid policy

map-agent/files/lib/wifi/multiap

@@ -404,6 +404,7 @@ teardown_iface() {
 		uci -q set mapagent.${section}.enabled="0"
 		uci -q set mapagent.${section}.ssid="DISABLED-SSID"
 		uci -q set mapagent.${section}.key="DISABLED-KEY"
+		uci -q del mapagent.${section}.vid
 
 		# subshell in hopes to maintain mapagent config loaded
 		(mapagent_teardown_wireless $ifname)
@@ -683,29 +684,43 @@ bsta_enable_all() {
 	bsta_scan_on_enabled
 }
 
-bsta_clear_all_bssid() {
+# arg = one interface to clear
+# no arg = clear all interfaces
+bsta_clear_bssid() {
+	local iface=$1
+
 	mapagent_remove_bssid() {
+		local iface=$2
+
+		config_get ifname $1 ifname
+
+		[ -n "$iface" -a "$iface" != "$ifname" ] && return
+
 		uci -q set mapagent.$1.enabled="1"
 		uci -q del mapagent.$1.bssid
 	}
 
 	wireless_remove_bssid() {
+		local iface=$2
+
 		config_get mode $1 mode
 		config_get ifname $1 ifname
 
 		[ "$mode" != "sta" ] && return
 
+		[ -n "$iface" -a "$iface" != "$ifname" ] && return
+
 		uci -q del wireless.$1.bssid
 		wpa_cli -i "$ifname" bssid 0 00:00:00:00:00:00 > /dev/null 2>&1
 		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
 	}
 
 	config_load mapagent
-	config_foreach mapagent_remove_bssid bsta
+	config_foreach mapagent_remove_bssid bsta $iface
 	uci commit mapagent
 
 	config_load wireless
-	config_foreach wireless_remove_bssid wifi-iface
+	config_foreach wireless_remove_bssid wifi-iface $iface
 	uci commit wireless
 }
 
@@ -778,6 +793,10 @@ bsta_disable_lower_priority() {
 
 		[ "$ifname" != "$2" -a "$priority" -gt "$3" ] && enabled="0"
 
+		# enable passed ifname explicitly
+		# don't explicitly enable other higher prio interfaces
+		[ "$ifname" != "$2" -a "$enabled" = "1" ] && return
+
 		uci -q set mapagent.$1.enabled="$enabled"
 
 		(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
@@ -814,6 +833,12 @@ bsta_use_link() {
 	local bsta=$1
 
 	config_foreach mapagent_disable_bk bsta $bsta
+
+	noht=$(iw $bsta info | grep "no HT")
+	[ -n "$noht" ] &&  {
+		logger -t multiap "no HT hit, issue reassoc $bsta"
+		wpa_cli -i $bsta reassoc
+	}
 }
 
 bsta_swap_to_link() {
@@ -904,7 +929,7 @@ case "$func" in
 	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
 	ts) ts_sub $@;;
 	bsta_enable_all) bsta_enable_all $@;;
-	bsta_clear_all_bssid) bsta_clear_all_bssid $@;;
+	bsta_clear_bssid) bsta_clear_bssid $@;;
 	bsta_blacklist_bssid_set) bsta_blacklist_bssid_set $@;;
 	bsta_blacklist_bssid_clear) bsta_blacklist_bssid_clear $@;;
 	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;

map-agent/files/lib/wifi/traffic_separation

@@ -23,62 +23,6 @@ EOF
 	}
 
 	ts_create() {
-		_net_setup() {
-			local name=$1
-			local vid=$2
-			local proto=$3
-			local dev=$4
-			local port_dev=$5
-
-			[ -z "$(uci -q get network.${name})" ] || return
-
-			local ip_addr="192.168.${vid}.1"
-			local br_dev="${AL_BRIDGE/-/_}"
-			local tag=":t"
-
-			[ "${vid}" = "${PRIMARY_VID}" ] && {
-				tag=""
-
-				# Global options
-				[ -z "$(uci -q get network.${br_dev}.vlan_filtering)" ] && {
-					uci -q set network.${br_dev}.vlan_filtering=1;
-				}
-
-				uci -q delete network.lan.proto
-				uci -q delete network.lan.ipaddr
-				uci -q delete network.lan.netmask
-				uci -q delete network.lan.ip6assign
-			}
-
-			uci -q set network.${name}="interface"
-			uci -q set network.${name}.device="$dev"
-			uci -q set network.${name}.is_lan="1"
-
-			if [ "$proto" = "static" ] ; then
-				uci -q set network.${name}.proto="static"
-				# TODO vid > 255
-				uci -q set network.${name}.ipaddr="${ip_addr}"
-				uci -q set network.${name}.netmask="255.255.255.0"
-				uci -q set network.${name}.ip6assign '60'
-			else
-				uci -q set network.${name}.proto="dhcp"
-			fi
-
-			uci -q add network bridge-vlan
-			uci -q set network.@bridge-vlan[-1].device="$AL_BRIDGE"
-			uci -q set network.@bridge-vlan[-1].vlan="$vid"
-
-			for port in $(uci -q get network.${br_dev}.ports) ; do
-				echo $port | grep -q eth || continue
-				uci -q add_list network.@bridge-vlan[-1].ports="${port}${tag}"
-			done
-
-			uci -q add_list network.${br_dev}.ports="$port_dev"
-			uci -q add_list network.@bridge-vlan[-1].ports="$port_dev"
-
-			uci -q commit network
-		}
-
 		_dhcp_setup() {
 			local name=$1
 
@@ -121,10 +65,6 @@ EOF
 
 			[ "$zone_exist" != "0" ] && return
 
-			[ "${vid}" = "${PRIMARY_VID}" ] && {
-				uci -q delete firewall.lan
-			}
-
 			uci -q add firewall zone
 			uci -q set firewall.@zone[-1].name="$name"
 			uci -q add_list firewall.@zone[-1].network="$network"
@@ -139,6 +79,91 @@ EOF
 			uci -q commit firewall
 		}
 
+		_guest_net_setup() {
+			local vid=$1
+			local name="guest${vid}"
+			local dev="guest_dev${vid}"
+			local br_guest="br-guest${vid}"
+			local peer="guest_peer${vid}"
+			local ip_addr="192.168.${vid}.1"
+			local br_dev="${AL_BRIDGE/-/_}"
+
+			[ "${vid}" = "${PRIMARY_VID}" ] && return
+
+			ip link show $dev 2> /dev/null || {
+				ip link add $dev type veth peer name $peer
+			}
+
+			ip link set $dev up
+			ip link set $port_dev up
+
+			[ -z "$(uci -q get network.${name})" ] || return
+
+			uci -q set network.${name}="interface"
+			uci -q set network.${name}.device="${br_guest}"
+			uci -q set network.${name}.is_lan="1"
+			uci -q set network.${name}.proto="static"
+			uci -q set network.${name}.ipaddr="${ip_addr}"
+			uci -q set network.${name}.netmask="255.255.255.0"
+			uci -q set network.${name}.ip6assign '60'
+
+			uci -q set network.br_${name}="device"
+			uci -q set network.br_${name}.name="${br_guest}"
+			uci -q set network.br_${name}.type="bridge"
+
+			if [ -z $(uci -q get network.${br_dev}.ports | grep -w ${dev}) ]; then
+				uci -q add_list network.${br_dev}.ports="${dev}"
+			fi
+
+			if [ -z $(uci -q get network.br_${name}.ports | grep -w ${peer}) ]; then
+				uci -q add_list network.br_${name}.ports="${peer}"
+			fi
+
+			if [ -z $(uci -q get network.vlan${vid}.ports | grep -w ${dev}) ]; then
+				uci -q add_list network.vlan${vid}.ports="${dev}:*"
+			fi
+
+			uci -q commit network
+		}
+
+		_net_setup() {
+			local vid=$1
+			local layer3=$2
+			local name="vlan${vid}"
+			local br_dev="${AL_BRIDGE/-/_}"
+			local tag=":t"
+			local self_flags="untagged"
+			local brvid_local="1"
+
+			[ -z "$(uci -q get network.${name})" ] || return
+
+			uci -q set network.${name}="bridge-vlan"
+			uci -q set network.${name}.name="${name}"
+			uci -q set network.${name}.device="$AL_BRIDGE"
+			uci -q set network.${name}.vlan="$vid"
+
+			if [ "${vid}" = "${PRIMARY_VID}" ]; then
+				self_flags="untagged pvid"
+				tag=":*"
+			elif [ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ]; then
+				brvid_local="0"
+			fi
+
+			uci -q set network.${name}.flags="${self_flags}"
+			uci -q set network.${name}.local="${brvid_local}"
+
+			for port in $(uci -q get network.${br_dev}.ports) ; do
+				if [ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ]; then
+					echo $port | grep "guest" && continue
+				fi
+				uci -q get network.${name}.ports | grep -q "${port}${tag}" && continue
+				uci -q add_list network.${name}.ports="${port}${tag}"
+			done
+
+			uci -q commit network
+		}
+		local layer3=$(uci -q get mapagent.agent.layer3_ts)
+
 		vid=$1
 
 		[ -n "$vid" ] || {
@@ -148,48 +173,62 @@ EOF
 			exit 1
 		}
 
-		ip link show sink${vid} 2> /dev/null || {
-			ip link add sink${vid} type veth peer name sink_peer${vid}
+		_net_setup ${vid} ${layer3}
+
+                logger -t vlan "setup ts vid $vid"
+		[ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ] && {
+			_dhcp_setup guest${vid}
+			_firewall_setup guest${vid} ${vid}
+			_guest_net_setup ${vid}
+
 		}
 
-		ip link set sink${vid} up
-		ip link set sink_peer${vid} up
-
-		proto="dhcp"
-		[ -x "/usr/sbin/mapcontroller" ] && proto="static" ;
-		_net_setup "vlan${vid}" ${vid} ${proto} "sink${vid}" "sink_peer${vid}"
-
-		[ -x "/usr/sbin/mapcontroller" ] && {
-			_dhcp_setup vlan${vid}
-			_firewall_setup vlan${vid} ${vid}
-		}
+                # Disable pktfwd here and flush FlowCache rules
+                echo 0 > /proc/pktfwd_dhd/enable
+                echo 0 > /proc/pktfwd_wl/enable
+                fcctl flush
 	}
 
 	ts_reload() {
+		# TODO check it again
 		local dhcp_reload=$1
+		restart=""
 
-		# workaround for missing backhaul wifi.ap.* ubus obj's:
-		# iterate in config and setup bh
-#		config_load wireless
+		bridge_verify_vid_mapping() {
+			local section=$1
 
-# _setup_bh_iface() {
-#			local sec=$1
-#			local iface=$2
-#			local bridge=$3
+			check_port_vid() {
+				local port="$1"
+				local vlan="$2"
 
-#			config_get ifname $sec ifname
+				added=$(bridge vlan show dev $port | grep -w "$vlan")
+				if [ "$added" = "" ]; then
+					restart="1"
+					break
+				fi
+			}
 
-#			config_get mode $sec mode
-#			config_get multi_ap $sec multi_ap "0"
-#			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
-#				ts_create bh $ifname 1 2 br-map
-#			}
-		#}
+			config_get vlan "$section" vlan "0"
+
+			[ "$vlan" = "0" ] && continue
+
+			config_list_foreach "$section" "ports" check_port_vid "$vlan"
+			[ "$restart" = "1" ] && break
+		}
+
+
+
+		config_load network
+		config_foreach bridge_verify_vid_mapping bridge-vlan
 
-#		config_foreach _setup_bh_iface wifi-iface
 
 		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
-		ubus call uci commit '{"config":"network"}'
+		if [ "$restart" = "1" ]; then
+			dbg "trigger network restart"
+			/etc/init.d/network restart
+		else
+			ubus call uci commit '{"config":"network"}'
+		fi
 		/etc/init.d/firewall reload
 
 
@@ -198,12 +237,223 @@ EOF
 		#done
 	}
 
+	# maintain VIDs passed as args in network config, remove rest
+	ts_keep() {
+		local al_bridge=$(uci -q get mapagent.agent.al_bridge)
+		local layer3="$(uci -q get mapagent.agent.layer3_ts)"
+		restart=""
+
+		[ "$al_bridge" = "" ] && al_bridge="br-lan"
+
+
+		guest_teardown() {
+			local section=$1
+			local config=$2
+			local bridge=$3
+			local option=$4
+
+			config_get name "$section" "$option"
+
+			[ "$bridge" != "$name" ] && continue
+
+			uci -q delete ${config}.${section}
+		}
+
+		bridge_vlan_teardown() {
+			local section=$1
+			shift
+			local bridge=$1
+			shift
+			local layer3=$1
+			shift
+			local keep="$@"
+
+			config_get device "$section" device
+
+			[ "$bridge" != "$device" ] && continue
+
+			config_get vlan "$section" vlan
+
+			for i in $@; do
+				if [ "$i" -eq "$vlan" ] ; then
+					return
+				fi
+			done
+
+			#if layer3ts enabled
+			if [ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ]; then
+				local br_guest="br-guest${vlan}"
+
+				config_load network
+				config_foreach guest_teardown device "network" $br_guest "name" $@ # could easier be replaced by uci ubus api and using match field
+				config_foreach guest_teardown interface "network" $br_guest "device" $@ # could easier be replaced by uci ubus api and using match field
+
+				config_load dhcp
+				[ -n "$(uci -q get dhcp.guest${vlan})" ] && {
+					uci -q delete dhcp.guest${vlan}
+					restart="1"
+				}
+				config_load firewall
+				config_foreach guest_teardown zone "firewall" guest${vlan} "name" $@ #delete firewall section with name = guest${vlan}
+				config_foreach guest_teardown forwarding "firewall" guest${vlan} "src" $@ #delete firewall section with name = guest${vlan}
+			fi
+
+
+			#endif
+			uci -q delete network.$section
+			restart="1"
+		}
+
+		config_load network
+		(config_foreach bridge_vlan_teardown bridge-vlan $al_bridge $layer3 $@)
+
+		if [ "$restart" = "1" ]; then
+			uci commit network
+			if [ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ]; then
+				uci commit firewall
+				uci commit dhcp
+			fi
+			dbg "trigger network restart"
+			/etc/init.d/network restart
+		fi
+	}
+
+	ts_cleanup() {
+		local al_bridge=$(uci -q get mapagent.agent.al_bridge)
+		local layer3="$(uci -q get mapagent.agent.layer3_ts)"
+		restart=""
+
+		[ "$al_bridge" = "" ] && al_bridge="br-lan"
+
+		bridge_device_teardown() {
+			local section=$1
+			local bridge=$2
+			local layer3=$3
+			local br_dev="${AL_BRIDGE/-/_}"
+			local dev
+			local br_guest
+			local peer
+
+			config_get device "$section" device
+			config_get vlan "$section" vlan
+
+			dev="guest_dev${vlan}"
+
+			[ "$bridge" != "$device" ] && continue
+
+			uci -q delete network.$section
+
+			echo "restart"
+
+			[ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ] || continue
+
+			####
+			# layer3 specific teardown
+			####
+
+			guest_teardown() {
+				local section=$1
+				local config=$2
+				local bridge=$3
+				local option=$4
+
+				config_get name "$section" "$option"
+
+				[ "$bridge" != "$name" ] && continue
+
+				echo "$bridge=$name" > /dev/console
+
+				uci -q delete ${config}.${section}
+				echo "uci -q delete ${config}.${section}" > /dev/console
+			}
+
+			br_guest="br-guest${vlan}"
+
+			# network config guest teardown
+			config_load network
+			config_foreach guest_teardown device "network" $br_guest "name"
+			config_foreach guest_teardown interface "network" $br_guest "device"
+
+			if [ -n "$(uci -q get network.${br_dev}.ports | grep -w ${dev})" ]; then
+				uci -q del_list network.${br_dev}.ports="${dev}"
+			fi
+
+			peer="guest_peer${vlan}"
+
+			ip link show $dev 2> /dev/null && {
+				ip link del $dev
+			}
+
+			ip link show $peer 2> /dev/null && {
+				ip link del $peer
+			}
+
+			# dhcp config guest teardown
+			[ -n "$(uci -q get dhcp.guest${vlan})" ] && {
+				uci -q delete dhcp.guest${vlan}
+			}
+
+			# firewall config guest teardown
+			config_load firewall
+			config_foreach guest_teardown zone "firewall" guest${vlan} "name"
+			config_foreach guest_teardown forwarding "firewall" guest${vlan} "src"
+		}
+
+		config_load network
+		restart="$(config_foreach bridge_device_teardown bridge-vlan $al_bridge $layer3)"
+
+		if [ -n "$restart" ]; then
+			uci commit network
+			if [ -x "/usr/sbin/mapcontroller" -a "$layer3" = "1" ]; then
+				uci commit firewall
+				uci commit dhcp
+			fi
+			dbg "trigger network restart"
+			/etc/init.d/network restart
+		fi
+
+		# enable pktfwd again and flush FlowCache rules
+		echo 1 > /proc/pktfwd_dhd/enable
+		echo 1 > /proc/pktfwd_wl/enable
+		echo 0 > /proc/pktfwd_dhd/enable
+		echo 0 > /proc/pktfwd_wl/enable
+		echo 1 > /proc/pktfwd_dhd/enable
+		echo 1 > /proc/pktfwd_wl/enable
+		fcctl flush
+	}
+
+	ts_isolate() {
+		local action=$1
+		shift
+		local pvid=$1 # pvid
+		shift
+		local ifname=$1 # guest fbss name
+		shift
+		local ifprefix=$@ # 4addr mode ifname prefix
+
+		[ -z "$pvid" -o -z "$ifprefix" -o -z "$ifname" ] && return
+
+		for prefix in $@; do
+			ebtables -D FORWARD -i $ifname --o ${prefix}+ --vlan-id ! $pvid -j DROP -p 802_1Q > /dev/null 2>&1
+			ebtables -D FORWARD -i ${prefix}+ --o ${ifname} --vlan-id ! $pvid -j DROP -p 802_1Q > /dev/null 2>&1
+
+			[ "$action" != "add" ] && continue
+			ebtables -A FORWARD -i $ifname --o ${prefix}+ --vlan-id ! $pvid -j DROP -p 802_1Q > /dev/null 2>&1
+			ebtables -A FORWARD -i ${prefix}+ --o ${ifname} --vlan-id ! $pvid -j DROP -p 802_1Q > /dev/null 2>&1
+		done
+
+
+	}
+
 	local func=$1
 	shift
 
 	case "$func" in
 		create) dbg "create $@"; ts_create $@;;
+		keep) dbg "keep $@"; ts_keep $@;;
 		reload) dbg "reload $@"; ts_reload $@;;
+		cleanup) dbg "cleanup $@"; ts_cleanup $@;;
+		isolate) dbg "isolate $@"; ts_isolate $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;
 	esac

map-controller/Config.in

@@ -6,5 +6,21 @@ config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 	bool "Support Dynamic Controller configuration sync"
 	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
 
+config CONTROLLER_EASYMESH_VENDOR_EXT
+	bool "Enable extra features through Easymesh vendor extension"
+	default y
+
+config CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	string
+	default "\\\\x11\\\\x22\\\\x33"
+
+config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
+	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
+	default CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	help
+	Extra features not covered by the base Easymesh specification can be
+	enabled through CONTROLLER_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
+	through which such features would be exposed.
+
 endmenu
 endif

map-controller/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.10.0.1
+PKG_VERSION:=2.8.0.15
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=4cac1a57ede76550273ebd02aa13a1992d3645ab
+PKG_SOURCE_VERSION:=e71a5f4f7f947f4c7819b4caf238fd1bec9b4fe8
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -48,11 +48,18 @@ ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
 
+ifeq ($(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT),y)
+TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT_OUI)\\\"
+TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT
+endif
+
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapcontroller $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
+	$(CP) $(PKG_BUILD_DIR)/src/plugins/steer/rcpi/rcpi.so $(1)/usr/lib/mapcontroller/rcpi.so
 endef
 
 ifeq ($(LOCAL_DEV),1)

map-controller/files/etc/config/mapcontroller

@@ -6,8 +6,9 @@ config controller 'controller'
 	option enable_bsta_steer '0'
 	option use_bcn_metrics '0'
 	option use_usta_metrics '0'
-	option primary_vid '0'
+	option primary_vid '1'
 	option primary_pcp '0'
+	option enable_ts '0'
 	option allow_bgdfs '0'
 	option channel_plan '0'
 

map-controller/files/etc/init.d/mapcontroller

@@ -25,7 +25,8 @@ validate_controller_section() {
 		'use_bcn_metrics:bool:false' \
 		'use_usta_metrics:bool:false' \
 		'allow_bgdfs:range(0,2629744)' \
-		'channel_plan:range(0,2629744)'
+		'channel_plan:range(0,2629744)' \
+		'enable_ts:bool:false'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapcontroller" "Validation of controller section failed"
@@ -39,7 +40,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'ssid:string' \
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \

map-topology/Config.in

@@ -0,0 +1,22 @@
+if (PACKAGE_map-topology)
+
+menu "Configurations"
+
+config TOPOLOGYD_EASYMESH_VENDOR_EXT
+	bool "Enable extra features through Easymesh vendor extension"
+	default y
+
+config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	string
+	default "\\\\x11\\\\x22\\\\x33"
+
+config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI
+	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
+	default TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
+	help
+	Extra features not covered by the base Easymesh specification can be
+	enabled through TOPOLOGYD_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
+	through which such features would be exposed.
+
+endmenu
+endif

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.0.5
+PKG_VERSION:=2.5.0.13
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=8ddd80413d6ffd174cd1b4a6859e2a306af0d409
+PKG_SOURCE_VERSION:=413330b08fc4608ea2f5f740cf829f62d5a8bba0
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
@@ -31,6 +31,10 @@ define Package/map-topology
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
+define Package/map-topology/config
+	source "$(SOURCE)/Config.in"
+endef
+
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
@@ -43,6 +47,11 @@ endef
 
 MAKE_PATH:=src
 
+ifeq ($(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT),y)
+TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI)\\\"
+endif
+
+
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/map-topology/* $(PKG_BUILD_DIR)/

map-topology/files/etc/config/hosts

@@ -2,3 +2,4 @@
 config global 'global'
 	option ageing_timer '1440'
 	option reboot_persistent '0'
+	option ifname 'br-lan'

map-topology/files/etc/init.d/topologyd

@@ -24,7 +24,8 @@ validate_topology_config() {
 validate_global_section() {
 	uci_validate_section hosts global "global" \
 		'ageing_timer:uinteger' \
-		'reboot_persistent:bool'
+		'reboot_persistent:bool' \
+		'ifname:string'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "hosts" "Validation of global section failed"

mosquitto-auth-shadow/Makefile

@@ -0,0 +1,45 @@
+#
+# Copyright (c) 2022 Genexis B.V.
+#
+# This program and the accompanying materials are made available under the
+# terms of the Eclipse Public License 2.0 which is available at
+# https://www.eclipse.org/legal/epl-2.0/
+#
+# SPDX-License-Identifier: EPL-2.0
+#
+# Contributors:
+#   Erik Karlsson - initial implementation
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=mosquitto-auth-shadow
+PKG_VERSION:=1.0.0
+
+PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
+PKG_LICENSE:=EPL-2.0
+
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/mosquitto-auth-shadow
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=mosquitto - /etc/shadow authentication plugin
+  DEPENDS:=mosquitto
+  USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
+endef
+
+define Package/mosquitto-auth-shadow/description
+  Plugin for the mosquitto MQTT message broker that authenticates
+  users using /etc/shadow
+endef
+
+define Package/mosquitto-auth-shadow/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,mosquitto-auth-shadow))

mosquitto-auth-shadow/files/etc/uci-defaults/14_set-shadow-permissions

@@ -0,0 +1 @@
+chown root:shadow /etc/shadow && chmod 0640 /etc/shadow

mosquitto-auth-shadow/src/Makefile

@@ -0,0 +1,25 @@
+#
+# Copyright (c) 2022 Genexis B.V.
+#
+# This program and the accompanying materials are made available under the
+# terms of the Eclipse Public License 2.0 which is available at
+# https://www.eclipse.org/legal/epl-2.0/
+#
+# SPDX-License-Identifier: EPL-2.0
+#
+# Contributors:
+#   Erik Karlsson - initial implementation
+#
+
+TARGETS = mosquitto_auth_shadow.so
+
+all: $(TARGETS)
+
+%.pic.o: %.c
+	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
+
+mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
+	$(CC) $(LDFLAGS) -shared -o $@ $^
+
+clean:
+	rm -f *.o $(TARGETS)

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2022 Genexis B.V.
+ *
+ * This program and the accompanying materials are made available under the
+ * terms of the Eclipse Public License 2.0 which is available at
+ * https://www.eclipse.org/legal/epl-2.0/
+ *
+ * SPDX-License-Identifier: EPL-2.0
+ *
+ * Contributors:
+ *   Erik Karlsson - initial implementation
+ */
+
+#include <string.h>
+#include <shadow.h>
+#include <crypt.h>
+#include <mosquitto.h>
+#include <mosquitto_broker.h>
+#include <mosquitto_plugin.h>
+
+static int basic_auth_callback(int event, void *event_data, void *userdata)
+{
+	struct mosquitto_evt_basic_auth *ed = event_data;
+	struct spwd spbuf, *sp = NULL;
+	char buf[256];
+	struct crypt_data data;
+	char *hash;
+
+	/* Let other plugins or broker decide about anonymous login */
+	if (ed->username == NULL)
+		return MOSQ_ERR_PLUGIN_DEFER;
+
+	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
+
+	if (sp == NULL || sp->sp_pwdp == NULL)
+		return MOSQ_ERR_AUTH;
+
+	/* Empty string as hash means password is not required */
+	if (sp->sp_pwdp[0] == 0)
+		return MOSQ_ERR_SUCCESS;
+
+	if (ed->password == NULL)
+		return MOSQ_ERR_AUTH;
+
+	memset(&data, 0, sizeof(data));
+	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
+
+	if (hash == NULL)
+		return MOSQ_ERR_AUTH;
+
+	if (strcmp(hash, sp->sp_pwdp) == 0)
+		return MOSQ_ERR_SUCCESS;
+
+	return MOSQ_ERR_AUTH;
+}
+
+int mosquitto_plugin_version(int supported_version_count,
+			     const int *supported_versions)
+{
+	return 5;
+}
+
+int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
+			  void **user_data,
+			  struct mosquitto_opt *opts, int opt_count)
+{
+	*user_data = identifier;
+
+	return mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
+					   basic_auth_callback, NULL, NULL);
+}
+
+int mosquitto_plugin_cleanup(void *user_data,
+			     struct mosquitto_opt *opts, int opt_count)
+{
+	mosquitto_plugin_id_t *identifier = user_data;
+
+	return mosquitto_callback_unregister(identifier, MOSQ_EVT_BASIC_AUTH,
+					     basic_auth_callback, NULL);
+}

obuspa/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=5.0.0.16
+PKG_VERSION:=5.0.0.16.5
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cd47bcaf1cc82dfd5c10ea76491fd0dae4436cc6
+PKG_SOURCE_VERSION:=b0626e54ba4a0e8d1d261948a7114c6dc35e2dbc
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -91,6 +91,7 @@ endif
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/
+        $(Build/Patch)
 endef
 endif
 

obuspa/files/etc/init.d/obuspa

@@ -1,7 +1,7 @@
 #!/bin/sh /etc/rc.common
 
 START=99
-STOP=2
+STOP=02
 USE_PROCD=1
 PROG=/usr/sbin/obuspa
 

obuspa/files/etc/obuspa/dmcaching_exclude.json

@@ -1,7 +1,8 @@
 {
   "dmcaching_exclude": [
-    "Device.DeviceInfo.ProcessStatus.Process.",
+    "Device.InterfaceStack.",
     "Device.Hosts.Host.",
+    "Device.IEEE1905.",
     "Device.WiFi.DataElements."
   ]
 }

obuspa/patches/0002-supress-group-get-error.patch

@@ -0,0 +1,42 @@
+--- a/src/core/cli_server.c
++++ b/src/core/cli_server.c
+@@ -733,10 +733,6 @@ int ExecuteCli_Get(char *arg1, char *arg
+             USP_ASSERT(gge->value != NULL);
+             SendCliResponse("%s => %s\n", gge->path, gge->value);
+         }
+-        else
+-        {
+-            SendCliResponse("ERROR: %d retrieving %s (%s)\n", gge->err_code, gge->path, gge->err_msg);
+-        }
+     }
+ 
+     GROUP_GET_VECTOR_Destroy(&ggv);
+--- a/src/core/handle_get.c
++++ b/src/core/handle_get.c
+@@ -252,24 +252,14 @@ void FormPathExprResponse(int get_expr_i
+         return;
+     }
+ 
+-    // If there was an error in getting any of the parameters associated with the path expression,
+-    // then just add the first error, without any of the parameter values, for this path expression result
+-    for (i=0; i < gi->num_entries; i++)
+-    {
+-        gge = &ggv->vector[gi->index + i];
+-        if (gge->err_code != USP_ERR_OK)
+-        {
+-            (void)AddGetResp_ReqPathRes(resp, path_expr, gge->err_code, gge->err_msg);
+-            return;
+-        }
+-    }
+-
+     // If the code gets here, then the value of all parameters were retrieved successfully, so add their values to the result_params
+     req_path_result = AddGetResp_ReqPathRes(resp, path_expr, USP_ERR_OK, "");
+     for (i=0; i < gi->num_entries; i++)
+     {
+         gge = &ggv->vector[gi->index + i];
+ 
++        if (gge->err_code != USP_ERR_OK)
++		continue;
+ #ifdef GET_RESPONSE_SIMPLE_FORMAT
+         // Simple format contains a resolved_path_result for every object (and sub object)
+         AddResolvedPathResult(req_path_result, gge->path, gge->value, 0);

ponmngr/files/etc/init.d/xpon

@@ -1,22 +1,37 @@
 #!/bin/sh /etc/rc.common
 
 START=19
-STOP=10
+STOP=91
 
 USE_PROCD=1
 
 . /lib/functions.sh
 include /lib/xpon
 
+configure_serial_number() {
+	# serial number generation is taken care in the uci defaults, so if
+	# serial number is not found here its a misconfig
+	serial_number="$(uci -q get xpon.ani.serial_number)"
+	if [ ${#serial_number} -eq 12 ]; then
+		vendor_id="${serial_number:0:4}"
+		vssn="${serial_number:4:8}"
+	else
+		logger -s -t "xpon" "Serial number not found in uci, ont will probably not be registered at the olt"
+		logger -s -t "xpon" "Please configure a valid serial number"
+		return
+	fi
+
+	set_serial_number $vendor_id $vssn
+}
+
 start_service() {
 	if [ "$(uci -q get xpon.ani.enable)" == "1" ]; then
+		configure_serial_number
 		init_xpon
 	fi
 }
 
 stop_service() {
-	# stopping omcid does not bring down the pon link, which should happen
-	# if ANI is disabled or stopped (go to O1)
 	deinit_xpon
 }
 

ponmngr/files/etc/uci-defaults/60-xpon-generate

@@ -1,17 +1,34 @@
 #!/bin/sh
 
+
+configure_serial_number() {
+	# check if serial number is present in the production data
+	production_sn="$(fw_printenv -n gponsn)"
+	if [ ${#production_sn} -eq 12 ]; then
+		uci set xpon.ani.serial_number=$production_sn
+	else
+		macaddr="$(fw_printenv -n ethaddr | tr -d ':' | tr 'a-z' 'A-Z')"
+		vendor_id="IOPS"
+		vssn="${macaddr:4:8}"
+		uci set xpon.ani.serial_number=$vendor_id$vssn
+	fi
+}
+
 if [ -s "/etc/config/xpon" ]; then
         if uci -q get xpon.ani >/dev/null; then
-                # return if there is any valid content
+                # generate serial number in case its not present and return
+		serial_number="$(uci -q get xpon.ani.serial_number)"
+		if [ ${#serial_number} -ne 12 ]; then
+			configure_serial_number
+		fi
                 exit                                  
         else                                          
                 rm -f /etc/config/xpon
         fi                           
 fi                                   
 touch /etc/config/xpon
-                     
-                          
+
 uci set xpon.ani=ani
 uci set xpon.ani.enable="1"
-                                           
-uci commit xpon  
+configure_serial_number
+

ponmngr/files/lib/xpon/broadcom.sh

@@ -1,20 +1,30 @@
 #!/bin/sh
 
-USE_PROCD=1
-
 . /lib/functions.sh
 
+set_serial_number() {
+	vendor_id=$1
+	vssn=$2
+
+	vendor_id="$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')"
+	vendor_id=${vendor_id:0:8}
+
+	bs /b/c gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vssn}
+}
+
 init_xpon() {
 	procd_open_instance pon_msgd
 	procd_set_param command bcm_msgd -c gpon
 	procd_close_instance
+
 	procd_open_instance pon_daemon
 	procd_set_param command omcid start -n
+	procd_set_param respawn
 	procd_close_instance
-
 }
 
 deinit_xpon() {
+	# stopping omcid does not bring down the pon link, which should happen
+	# if ANI is disabled or stopped (go to O1)
 	gponctl stop
 }
-

qosmngr/files/lib/qos/broadcom.sh

@@ -7,20 +7,15 @@ BR_RULE=""
 BR6_RULE=""
 
 POLICER_COUNT=0
-INTF_NAME=""
 Q_COUNT=0
-ITER=0
-PREV_ORDER=""
-CURR_ORDER=""
-MAX_ORDER=""
-
+SP_Q_PRIO=7
 
 # Function to handle a queue order and
 # update total number of queues
 handle_q_order() {
-	qid="$1" #queue section ID
+	local qid="$1" #queue section ID
 
-	config_get is_enable "$qid" "enable"
+	config_get is_enable "$qid" "enable" 1
 
 	# No need to configure disabled queues
 	if [ $is_enable == '0' ]; then
@@ -36,7 +31,7 @@ handle_q_order() {
 	# Create precedence file containing queue order per
 	# interface.
 	local precedence_file="/tmp/qos/$ifname/q_order"
-	local q_no=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
+	local q_no=$(cat /tmp/qos/$ifname/q_idx)
 
 	config_get precedence "$qid" "precedence"
 	value=${precedence}_q${q_no}
@@ -44,71 +39,32 @@ handle_q_order() {
 
 	# Update the number of queues per interface.
 	q_no=$((q_no + 1))
-	echo $q_no > /tmp/qos/queue_stats/$ifname/q_idx
+	echo $q_no > /tmp/qos/$ifname/q_idx
 }
 
-# Function to check if values are greater than (total number
-# of queue -1) and map them to corresponding value.
-configure_precedence_to_file() {
-	order="$1"
-	line="$2"
-	order_file="$3"
-
-	if [ $order == "$PREV_ORDER" ]; then
-		queue_id=${line#*_}
-		val=${CURR_ORDER}_${queue_id}
-		echo $val >> $order_file
-	else
-		PREV_ORDER=$order
-		queue_id=${line#*_}
-		val=${MAX_ORDER}_${queue_id}
-		echo $val >> $order_file
-		CURR_ORDER=$MAX_ORDER
-		MAX_ORDER=$((MAX_ORDER - 1))
-	fi
-}
-
-# Fucntion to map queue precedence per interface
-# ranging from 1-X to 0-(no of queues -1)
-map_queue_precedence() {
+# Sort queue, lower value in uci means higher precedence, so this
+# function sorts the precedence in decending order
+sort_q_by_precedence() {
 	ifname="$1"
-	total_q=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
-	q_no=`expr $total_q - 1`
 
-	MAX_ORDER=$q_no
-
-	local precedence_file="/tmp/qos/$ifname/q_precedence"
 	local order_file="/tmp/qos/$ifname/q_order"
+	local tmp_order_file="/tmp/qos/$ifname/q_order.tmp"
 
-	sort -n -r -k1 $order_file >> $precedence_file
-	rm $order_file
-
-	while read line
-	do
-		order=${line%_*}
-		if [ $order  -gt $q_no ]; then
-			ITER=$((ITER + 1))
-			configure_precedence_to_file $order $line $order_file
-		else
-			if [ $ITER == '0' ]; then
-				echo $line >> $order_file
-			else
-				configure_precedence_to_file $order $line $order_file
-			fi
-		fi
-
-	done < $precedence_file
+	sort -n -k1 $order_file > $tmp_order_file
+	cp $tmp_order_file $order_file
+	rm -f $tmp_order_file
 }
 
-map_precedence() {
+sort_by_precedence() {
 	for interf in $(db -q get hw.board.ethernetPortOrder); do
-		map_queue_precedence $interf
+		sort_q_by_precedence $interf
 	done
 }
 
 # function to handle a queue section
 handle_queue() {
-	qid="$1" #queue section ID
+	local qid="$1" #queue section ID
+	local intf_name="$2"
 
 	config_get is_enable "$qid" "enable"
 
@@ -124,33 +80,35 @@ handle_queue() {
 	fi
 
 	# This is to get the qid per interface.
-	if [ "$INTF_NAME" == $ifname ]; then
-		Q_COUNT=$((Q_COUNT + 1))
-	else
-		Q_COUNT='0'
+	if [ "$intf_name" != "$ifname" ]; then
+		return
 	fi
 
-	INTF_NAME=$ifname
+	local precedence_file="/tmp/qos/$ifname/q_order"
 
-	local total_q=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
-	q_no=`expr $total_q - 1` local
-	precedence_file="/tmp/qos/$ifname/q_order"
+	local temp_order=0
+	while read -r line; do
+		line_qid=${line: -1}
+		if [ "$line_qid" == "$Q_COUNT" ]; then
+			break
+		fi
+		temp_order=$((temp_order + 1))
+	done < "$precedence_file"
 
-	# TR181 suggests lower the precedence value higher the priority
-	# but in the chip its the opposite ie lower the value, lower
-	# the priority of queue on this chip. So we need to reverse the
-	# precedence value.
-	precedence="$(grep -i q${Q_COUNT} $precedence_file)"
-	precedence=${precedence%_*}
-	order=`expr $q_no - $precedence`
+	# for sp queue, no matter what the precedence value is configured in the uci file
+	# broadcom recommends that the highest precedence queue should have priority value
+	#7, the next priority q 6 and so on.
+	# Here, we have the index of the queue when sorted by precedence value in the file
+	# precedence_file so the order is calculated accordingly.
+	local order=`expr $SP_Q_PRIO - $temp_order`
 
 	config_get sc_alg "$qid" "scheduling"
-	config_get wgt "$qid" "weight"
+	config_get wgt "$qid" "weight" 1
 	config_get rate "$qid" "rate"
 	config_get bs "$qid" "burst_size"
 	config_get qsize "$qid" "queue_size" 1024
 
-	salg=1
+	local salg=1
 
 	case "$sc_alg" in
 		"SP") salg=1
@@ -163,31 +121,15 @@ handle_queue() {
 		;;
 	esac
 
-	# ignore precedence value in case of WRR
+	# ignore precedence value in case of WRR, broadcom recommends that WRR queue should
+	# always have precedence value set to 0
 	if [ $salg -eq 2 ]; then
 	       order=0
 	fi
 
 	# Call tmctl which is a broadcomm command to configure queues on a port.
 	tmctl setqcfg --devtype 0 --if $ifname --qid $Q_COUNT --priority $order --qsize $qsize --weight $wgt --schedmode $salg --shapingrate $rate --burstsize $bs
-
-	# In BCM968 chips, the counters for queues are read, on other model, its read and reset. So, to maintain counter
-	# value and uniform behaviour, we are storing counter value for each queue in files
-	local d_name="/tmp/qos/queue_stats/${ifname}/q_${Q_COUNT}"
-	mkdir $d_name
-	local f_name="$d_name/txPackets"
-	touch $f_name
-	echo 0 > $f_name
-	f_name="$d_name/txBytes"
-	touch $f_name
-	echo 0 > $f_name
-	f_name="$d_name/droppedPackets"
-	touch $f_name
-	echo 0 > $f_name
-	f_name="$d_name/droppedBytes"
-	touch $f_name
-	echo 0 > $f_name
-
+	Q_COUNT=$((Q_COUNT + 1))
 }
 
 #function to handle a policer section
@@ -1092,28 +1034,20 @@ configure_classify() {
 
 pre_configure_queue() {
 	# Delete queues
-	rm -rf /tmp/qos/queue_stats
-
 	for intf in $(db get hw.board.ethernetPortOrder); do
 		rm -rf /tmp/qos/$intf
 
-		mkdir -p /tmp/qos/queue_stats/$intf
-		touch /tmp/qos/queue_stats/$intf/q_idx
-		echo 0 > /tmp/qos/queue_stats/$intf/q_idx
+		mkdir -p /tmp/qos/$intf
+		touch /tmp/qos/$intf/q_order
+		touch /tmp/qos/$intf/q_idx
+		echo 0 > /tmp/qos/$intf/q_idx
 
-#		tm initialization pushing ahead of delcfg as
-#		porttminit bydefault configures all queue as SP configuration.
-#		that was causing WRR queue configuration failure.
-		tmctl porttminit --devtype 0 --if $intf --flag 0 --numqueues 8
+		tmctl porttminit --devtype 0 --if $intf --numqueues 8
 
 		i=0
 		for i in 0 1 2 3 4 5 6 7; do
 			tmctl delqcfg --devtype 0 --if $intf --qid $i &>/dev/null
 		done
-
-		mkdir -p /tmp/qos/$intf
-		touch /tmp/qos/$intf/q_order
-		touch /tmp/qos/$intf/q_precedence
 	done
 }
 
@@ -1121,8 +1055,15 @@ configure_queue() {
 	# Load UCI file
 	config_load qos
 	config_foreach handle_q_order queue
-	map_precedence
-	config_foreach handle_queue queue
+	sort_by_precedence
+	for interf in $(db -q get hw.board.ethernetPortOrder); do
+		Q_COUNT=0
+		# sp queue have max priority value = no. of queue configured on the port
+		# hence read and update SP_Q_PRIO here
+		local q_no=$(cat /tmp/qos/$interf/q_idx)
+		SP_Q_PRIO=`expr $q_no - 1`
+		config_foreach handle_queue queue $interf
+	done
 }
 
 configure_policer() {

stunc/Makefile

@@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=stunc
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.11
+PKG_VERSION:=1.1.12
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/stunc.git
-PKG_SOURCE_VERSION:=ed0a4d88f4c42ab452eb8a84705598a297261f49
+PKG_SOURCE_VERSION:=5b65364709a921db0956bf74a4f126217cfb1775
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

sulu/Makefile

@@ -1,15 +1,15 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2021-2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu
-PKG_VERSION:=1.0.10
+PKG_VERSION:=1.3.15
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu.git
-PKG_SOURCE_VERSION:=13d88f2ad9193951ff711b89500f57c48fdc9635
+PKG_SOURCE_VERSION:=81d4bb268914dc3822293e93519ae6adbd6ddbea
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
@@ -26,9 +26,8 @@ include $(INCLUDE_DIR)/package.mk
 define Package/sulu
 	SECTION:=sulu
 	CATEGORY:=Utilities
-	MENU=1
 	TITLE:=SULU-CE ReactJS based Web UI Package
-	DEPENDS:=+nginx
+	DEPENDS:=+nginx +mosquitto-auth-shadow
 endef
 
 define Package/sulu/description
@@ -38,9 +37,16 @@ endef
 define Package/sulu/install
 	$(INSTALL_DIR) $(1)/sulu
 	$(INSTALL_DIR) $(1)/sulu/config
+	$(INSTALL_DIR) $(1)/sulu/config/widgets
 	$(INSTALL_DIR) $(1)/etc/nginx/
+	$(INSTALL_DIR) $(1)/etc/mosquitto/conf.d/
 	$(CP) $(PKG_BUILD_DIR)/dist/* $(1)/sulu
-	$(CP) $(PKG_BUILD_DIR)/config/* $(1)/sulu/config
+	$(CP) $(PKG_BUILD_DIR)/config/*.json $(1)/sulu/config
+	$(CP) $(PKG_BUILD_DIR)/config/widgets/diagnostics.json $(1)/sulu/config/widgets/
+	$(CP) $(PKG_BUILD_DIR)/config/widgets/wan.json $(1)/sulu/config/widgets/
+ifeq ($(CONFIG_PACKAGE_skopeo)$(CONFIG_PACKAGE_umoci),yy)
+	$(CP) $(PKG_BUILD_DIR)/config/widgets/lcm-store.json $(1)/sulu/config/widgets/
+endif
 	$(CP) ./files/* $(1)/
 endef
 

sulu/files/etc/mosquitto/conf.d/obuspa.conf

@@ -0,0 +1,3 @@
+listener 1883 127.0.0.1
+allow_anonymous true
+

sulu/files/etc/mosquitto/conf.d/sulu.conf

@@ -0,0 +1,5 @@
+listener 9001
+protocol websockets
+plugin /usr/lib/mosquitto_auth_shadow.so
+require_certificate false
+allow_anonymous false

swmodd/Makefile

@@ -1,11 +1,12 @@
 #
-# Copyright (C) 2022 IOPSYS Software Solutions AB
+# Copyright (C) 2020 IOPSYS
 #
+# 
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.1.5
+PKG_VERSION:=2.1.5.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
@@ -30,8 +31,9 @@ define Package/swmodd
   SUBMENU:=TRx69
   TITLE:= Software Modules Daemon
   DEPENDS:=+libuci +libubox +ubus +libuuid +opkg +libcurl \
-	    +PACKAGE_liblxc:liblxc +PACKAGE_liblxc:cgroupfs-mount \
-	    +@BUSYBOX_CONFIG_BUSYBOX +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT
+	    +PACKAGE_liblxc:liblxc +@BUSYBOX_CONFIG_BUSYBOX \
+	    +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT +@BUSYBOX_CONFIG_SCRIPT \
+	    +swmodd-cgroup
 endef
 
 define Package/swmodd/description
@@ -42,6 +44,14 @@ define Package/swmodd/config
 	source "$(SOURCE)/Config.in"
 endef
 
+define Package/swmodd-cgroup
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:= Cgroup mount handler for Software modules daemon
+  DEPENDS:=+@CONFIG_KERNEL_CGROUPS
+endef
+
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-D_GNU_SOURCE \
@@ -81,4 +91,10 @@ ifeq ($(CONFIG_PACKAGE_liblxc),y)
 endif
 endef
 
+define Package/swmodd-cgroup/install
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/etc/init.d/swmodd_cgroup $(1)/etc/init.d/swmodd_cgroup
+endef
+
+$(eval $(call BuildPackage,swmodd-cgroup))
 $(eval $(call BuildPackage,swmodd))

swmodd/files/etc/init.d/swmodd_cgroup

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+log() {
+	echo "swmodd_cgroup: ${@}" >/dev/console
+}
+
+cgroup_remounting_required()
+{
+	if ! mount |grep -q '/sys/fs/cgroup '; then
+		return 1;
+	fi
+
+	if grep -v '^#' /etc/fstab | grep -q cgroup; then
+		log "fstab mounted system, remounting of cgroup not required"
+		return 1
+	fi
+
+	if [ ! -d /sys/fs/cgroup ] && [ ! -e /proc/cgroups ]; then
+		log "cgroup fs not found"
+		return 1
+	fi
+
+	umount /sys/fs/cgroup
+	return 0;
+}
+
+mount_cgroup()
+{
+
+	if ! cgroup_remounting_required; then
+		log "cgroup remounting not required"
+		return 1
+	fi
+
+	mount -t tmpfs -o uid=0,gid=0,mode=0755 cgroup /sys/fs/cgroup
+	cd /sys/fs/cgroup
+	for sys in $(awk '!/^#/ { if ($4 == 1) print $1 }' /proc/cgroups); do
+		mkdir -p $sys
+		if ! mountpoint -q $sys; then
+			if ! mount -n -t cgroup -o $sys cgroup $sys; then
+				rm -f $sys || true
+			fi
+		fi
+	done
+
+	if [ -e /sys/fs/cgroup/memory/memory.use_hierarchy ]; then
+		echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
+	fi
+}
+
+boot()
+{
+	mount_cgroup
+}

twamp/Makefile

@@ -6,13 +6,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=twamp
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.2.2
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/twamp-light.git
-PKG_SOURCE_VERSION:=4dfc8609fb0cefaaf9e86b559b1e10488117cf07
+PKG_SOURCE_VERSION:=b0111c35ff4908edd82c5d5f4a3c0d6809605b94
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -41,7 +41,7 @@ TARGET_CFLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-	$(CP) -rf ~/git/twamp/* $(PKG_BUILD_DIR)/
+	$(CP) -rf ~/git/twamp-light/* $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -58,6 +58,7 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_BIN) ./files/etc/init.d/twampd $(1)/etc/init.d/twampd
 	$(INSTALL_BIN) ./files/etc/firewall.twamp $(1)/etc/firewall.twamp
 	$(INSTALL_BIN) ./files/etc/uci-defaults/92-twampfirewall $(1)/etc/uci-defaults/92-twampfirewall
+	$(INSTALL_BIN) ./files/etc/uci-defaults/93-twamp_fix_reflector $(1)/etc/uci-defaults/93-twamp_fix_reflector
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

twamp/files/etc/config/twamp

@@ -1,11 +1,5 @@
-
 config twamp 'twamp'
 	option enable '0'
 	#Log levels: Critical=0, Error=1, Warning=2, Notice=3, Info=4, Debug=5
-	option log_level '4'
+	option log_level '3'
 
-config twamp_reflector 'reflector_1'
-	option enable '0'
-	option interface 'wan'
-	option port '862'
-	option max_ttl '1'

twamp/files/etc/firewall.twamp

@@ -29,8 +29,11 @@ function configure_firewall()
 
 function delete_rule()
 {
-        while iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" > /dev/null; do
-		iptables -w 1 -D zone_${1}_input $(iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" | head -1|awk '{print $1}');
+        while iptables -w 1 -L zone_${1}_input --line-numbers 2>/dev/null | grep "TWAMP reflector port"; do
+		rule_num="$(iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" | head -1|awk '{print $1}')"
+		if [ -n "${rule_num}" ]; then
+			iptables -w 1 -D zone_${1}_input ${rule_num};
+		fi
 	done
 }
 

twamp/files/etc/uci-defaults/93-twamp_fix_reflector

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+function rename_section()
+{
+	local enable inst
+
+	config_get interface ${1} interface ""
+	if [ -z "${interface}" ]; then
+		return 0
+	fi
+
+	inst="$(echo ${1}|cut -d '_' -f 2)"
+	uci_rename twamp ${1} "${interface}_${inst}"
+}
+
+config_load twamp
+config_foreach rename_section twamp_reflector
+
+exit 0
+

urlfilter/Makefile

@@ -6,13 +6,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=urlfilter
-PKG_VERSION:=1.1.3
+PKG_VERSION:=1.1.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/urlfilter.git
-PKG_SOURCE_VERSION:=5a64642ac33e629151788b3ff1de920776bcd2ed
+PKG_SOURCE_VERSION:=e55a2c2c7c992eb5071e82734bdc8850b71b02e0
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

usp-js/Makefile

@@ -6,7 +6,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=usp-js
-PKG_VERSION:=1.0.1
+PKG_VERSION:=0.0.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/usp-js.git
@@ -17,55 +17,26 @@ PKG_MIRROR_HASH:=skip
 PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
-PKG_BUILD_DEPENDS:=node-yarn/host
 include $(INCLUDE_DIR)/package.mk
 
-define Package/usp-js/default
+define Package/usp-js
   SECTION:=libs
   CATEGORY:=Libraries
   TITLE:=A JS library for USP(TR369) protocol
+  DEPENDS:=+quickjs +quickjs-websocket
 endef
 
 define Package/usp-js/description
   A JS library to provide USP(TR369) protocol functionality for an usp controller.
 endef
 
-define Package/usp-js-quickjs
-  $(Package/usp-js/default)
-  TITLE += (QuickJS)
-  DEPENDS:=+quickjs +quickjs-websocket
-  VARIANT:=quickjs
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/usp-js-nodejs
-  $(Package/usp-js/default)
-  TITLE += (NodeJS)
-  DEPENDS:=+node
-  VARIANT:=nodejs
-endef
-
-ifeq ($(BUILD_VARIANT),nodejs)
 define Build/Compile
-	cd $(PKG_BUILD_DIR) && yarn install && yarn build
+	cd $(PKG_BUILD_DIR) && npm install @types/node --save-dev && yarn qjs
 endef
-else
-define Build/Compile
-	cd $(PKG_BUILD_DIR) && yarn install && yarn qjs
-endef
-endif
 
-define Package/usp-js-quickjs/install
+define Package/usp-js/install
 	$(INSTALL_DIR) $(1)/usr/lib/usp-js
 	$(CP) $(PKG_BUILD_DIR)/qjs/* $(1)/usr/lib/usp-js/
 endef
 
-define Package/usp-js-nodejs/install
-	$(INSTALL_DIR) $(1)/usr/lib/node_modules/usp-js
-	$(INSTALL_DIR) $(1)/usr/lib/node_modules/usp-js/node_modules
-	$(CP) $(PKG_BUILD_DIR)/node/* $(1)/usr/lib/node_modules/usp-js/
-	$(CP) $(PKG_BUILD_DIR)/node_modules/* $(1)/usr/lib/node_modules/usp-js/node_modules/
-endef
-
-$(eval $(call BuildPackage,usp-js-nodejs))
-$(eval $(call BuildPackage,usp-js-quickjs))
+$(eval $(call BuildPackage,usp-js))

uspd/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=2.2.11
+PKG_VERSION:=2.2.14.2
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
-PKG_SOURCE_VERSION:=1bfd9937ae31c6878aff77fca25f9265d822b57d
+PKG_SOURCE_VERSION:=b181ce224547265ad46a7b2777f76dddef1de5b5
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

voicemngr/Makefile

@@ -0,0 +1,70 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=voicemngr
+PKG_VERSION:=0.1
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+LOCAL_SRC_DIR:=~/git/voip/voicemngr
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/voicemngr.git
+PKG_SOURCE_VERSION:=13a14593daa610a87c363a1a0acd19f31f405a71
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+TARGET_PLATFORM:=
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	TARGET_PLATFORM:=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_qualcomm),y)
+	TARGET_PLATFORM:=QUALCOMM
+endif
+
+export TARGET_PLATFORM
+export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BCM_CHIP_ID
+
+include $(INCLUDE_DIR)/package.mk
+
+TARGET_CFLAGS += -Wall -Werror
+
+define Package/voicemngr
+	CATEGORY:=Utilities
+	TITLE:=IOPSYS Voice Manager
+	URL:=
+	DEPENDS:= +libubox +ubus +libpicoevent +uci +TARGET_iopsys_brcm63xx_arm:bcmkernel +TARGET_iopsys_qualcomm:vtsp
+endef
+
+define Package/voicemngr/description
+	Voice manager is a daemon that bridges Asterisk and platform specific DSP/SLIC APIs
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	@echo "Building from the local source. TARGET_PLATFORM=$(TARGET_PLATFORM)"
+	rsync -av --exclude=.* $(LOCAL_SRC_DIR)/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/voicemngr/install
+	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/voicemngr $(1)/usr/sbin/
+	$(CP) $(PKG_BUILD_DIR)/libvoice/libvoice.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,voicemngr))
+

voicemngr/files/etc/init.d/voicemngr

@@ -4,15 +4,16 @@ START=68
 STOP=12
 
 USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
+NAME=voicemngr
 
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
 	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
 	procd_close_instance
 }
 
@@ -22,5 +23,5 @@ reload_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
+	procd_add_reload_trigger asterisk
 }

wfa-capi/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfa-capi
-PKG_VERSION:=1.1.2
+PKG_VERSION:=1.1.3
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ce29c2d69d0ca96b61f2de5d1ba107c8d31cb5ef
+PKG_SOURCE_VERSION:=64d9101c8e4930cbd3fe6ce471fb4cfd2b9b80dc
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfa-capi.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

wfadatad/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfadatad
-PKG_VERSION:=2.8.0.1
+PKG_VERSION:=2.10.0.6
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=01fd303670eef525e35c5337c4cf15418588273f
+PKG_SOURCE_VERSION:=70cc85371e2fa8e1eedf3601eaed03fe0bc2fe96
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

wifimngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifimngr
-PKG_VERSION:=14.0.8
+PKG_VERSION:=14.0.9
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=af1c9ae51544532bc535814de63f9a55d2388792
+PKG_SOURCE_VERSION:=c14a18402bc3abf4098916fefe6dafd0873c4586
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz