fix build errors

- use pre-compiled version of natalie dect
- disable 'cups' for samba packages

asterisk-1.8.x-mod/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1
 
-PKG_SOURCE_VERSION:=62c3764e6765fa9b1d22cb5dda26476e4742bdcf
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
 
@@ -455,8 +455,6 @@ define Package/asterisk18-mod/install
 	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
 endef
 
 define Package/asterisk18-mod-sounds/install

asterisk-1.8.x-mod/files/asterisk.hotplug

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ "$INTERFACE" == "$bindintf" ] || exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	bindaddr="${bindaddr:-0.0.0.0}"
-	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
-fi
-

asterisk-1.8.x-mod/files/asterisk.init

@@ -9,9 +9,25 @@ USE_PROCD=1
 NAME=asterisk
 PROG=/usr/sbin/asterisk
 DEFAULT=/etc/default/asterisk
-CONFDIR=/etc/asterisk
 
 init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	config_load voice_client
+	local bindintf
+	config_get bindintf SIP bindintf ""
+	if [ "$bindintf" == ""  ]; then
+		while ! ip r | grep -q default; do
+			sleep 1
+		done
+	else
+		network_get_ipaddr ip "$bindintf"
+		while [ "$ip" == "" ]; do
+			sleep 1
+			network_get_ipaddr ip "$bindintf"
+		done
+	fi
+
 	[ -f $DEFAULT ] && . $DEFAULT
 	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
 	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
@@ -39,7 +55,6 @@ start_service() {
 }
 
 reload_service() {
-	asterisk -rx "config reload $CONFDIR/sip.conf"
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=17aa3b1d8d372ebcf4d37379f7cc4fb59c461d4b
+PKG_SOURCE_VERSION:=3191d38385c8e46c3888859f196e41c7db4447bc
 PKG_NAME:=dectmngr2
 
 

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=4.1.0
-PKG_RELEASE:=RC8
+BASE_PKG_VERSION:=4.0.1
+PKG_RELEASE:=RC17
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=5d13d0034c0174cdb6d66f09a458851fe54d810e
+PKG_SOURCE_VERSION:=97a3da5fae8b5374a598c78346cb11477c85e293
 ifeq ($(CONFIG_ICE_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
@@ -45,7 +45,7 @@ endif
 
 ###########################--RELEASE--################################
 
-include $(INCLUDE_DIR)/uclibc++.mk
+#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ice-client/Default
@@ -58,7 +58,8 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+#	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
 endef
 
 define Package/ice-client/config
@@ -78,7 +79,7 @@ endef
 # PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 # 
 #
-# These settings allow you to specify a source folder where your source code is located
+# These settings allow you to specify a soruce folder where your source code is located
 # This avoids having to tar-zip or fetch from git each time
 # Changes can be done in your sources while the build is performed somewhere else
 # If you forget some settings, your source folder will be deleted!!! So be carefull and 

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-01-20
+PKG_VERSION:=3.0-2016-10-20
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5c39d8d99127010c8d553495cd318ced80531a04
+PKG_SOURCE_VERSION:=fdaa1daa184205fe256bb155b7fb0f29a034baaa
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,7 +34,7 @@ define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl
 endef
 
 define Package/icwmp/description

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -4,6 +4,7 @@
 include /lib/network
 
 [ "$INTERFACE" != "$(uci get layer2_interface_ethernet.Wan.ifname)" ] && exit
+[ "$(uci get netmode.setup.curmode)" != "repeater" ] && exit
 
 case "$(uci get netmode.setup.curmode)" in
 		repeater|repeater_dualdown) echo "Preparing to switch mode" ;;

inteno-netmodes/files/etc/init.d/netmode

@@ -69,13 +69,6 @@ populate_netmodes() {
 	local hardware=$(db get hw.board.hardware)
 	local keys lang desc exp exclude
 	for mode in $(ls $modedir); do
-
-			case "$mode" in
-				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || continue
-				;;
-			esac
-
 			lang=""
 			desc=""
 			exp=""

inteno-netmodes/files/etc/netmodes/bridged/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -1,20 +1,18 @@
 {
 	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
+		{ "en" : "Repeater 2.4▴▾2.4&5" },
+		{ "sv" : "Repeater 2.4▴▾2.4&5" }
 	],
 	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
 	],
 	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*"
-	],
-	"acl" : [
-		"admin"
+		"DG*",
+		"EG*",
+		"VG*"
 	],
 	"credentials" : 1,
 	"reboot" : 0
 }
+

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT
@@ -11,6 +8,7 @@ config defaults
 
 config zone
 	option name		lan
+	list   network		'lan'
 	option input		ACCEPT
 	option output		ACCEPT
 	option forward		ACCEPT

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -11,6 +11,14 @@ config interface 'wan'
 	option proto 'dhcp'
 	option vendorid 'Inteno_Repeater_$MAC4'
 	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
+	option ifname '$WAN.1'
 	option reqopts '43'
 
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -8,7 +8,7 @@ config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
 	option band 'a'
-	option bandwidth '80'
+	option bandwidth '20'
 	option hwmode '11ac'
 	option channel 'auto'
 	option scantimer '15'

inteno-netmodes/files/etc/netmodes/repeater_dualdown/DETAILS

@@ -1,20 +1,18 @@
 {
 	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
+		{ "en" : "Repeater 2.4▴▾5" },
+		{ "sv" : "Repeater 2.4▴▾5" }
 	],
 	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
+		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
+		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
 	],
 	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*"
-	],
-	"acl" : [
-		"admin"
+		"DG*",
+		"EG*",
+		"VG*"
 	],
 	"credentials" : 1,
 	"reboot" : 0
 }
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT
@@ -11,6 +8,7 @@ config defaults
 
 config zone
 	option name		lan
+	list   network		'lan'
 	option input		ACCEPT
 	option output		ACCEPT
 	option forward		ACCEPT

inteno-netmodes/files/etc/netmodes/repeater_dualdown/network

@@ -11,6 +11,14 @@ config interface 'wan'
 	option proto 'dhcp'
 	option vendorid 'Inteno_Repeater_$MAC4'
 	option hostname 'Inteno_Repeater_$MAC4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
+	option ifname '$WAN.1'
 	option reqopts '43'
 
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/wireless

@@ -8,7 +8,7 @@ config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
 	option band 'a'
-	option bandwidth '80'
+	option bandwidth '20'
 	option hwmode '11ac'
 	option channel 'auto'
 	option scantimer '15'

inteno-netmodes/files/etc/netmodes/routed/firewall

@@ -1,5 +1,5 @@
-config settings 'settings'
-        option disabled '0'
+config settings settings
+        option disabled 0
 
 config defaults
 	option syn_flood	1

iop/configs/config

@@ -136,7 +136,6 @@ CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
 CONFIG_PACKAGE_usb-modeswitch=y
 CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_wget=y
 CONFIG_PACKAGE_wwan=y
 CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
@@ -186,7 +185,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
 # CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_BUSYBOX_CONFIG_WGET is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
 # CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
 # CONFIG_BUSYBOX_CONFIG_PAM is not set

iop/scripts/genconfig.sh

@@ -1,352 +1,297 @@
 #!/bin/bash
 
 function genconfig {
-	export CLEAN=0
-	export IMPORT=1
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	export THEMEDIR="themes"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"
-	CUSTPATH="customerconfigs"
-	CUSTREPO="git@private.inteno.se:customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
+    export CLEAN=0
+    export IMPORT=0
+    export SRCTREEOVERR=0
+    export FILEDIR="files/"
+    export CONFIGPATH="package/feeds/feed_inteno_packages/iop/configs"  
+    export CUSTCONF="customerconfigs"
+    export VERBOSE=0
+    export DEVELOPER=0
+    LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
-	iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
-	iopsys_brcm63xx_arm="dg400 eg400"
-	iopsys_ramips="ex400"
-	ramips="mt7621"
-	target="bogus"
-	masterconfig=1
+    iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25"
+    iopsys_brcm63xx_arm="dg400 eg400"
+    iopsys_ramips="ex400"
+    ramips="mt7621"
+    target="bogus"
+    masterconfig=1
+
+    set_target() {
 
-	set_target()
-	{
 	local profile=$1
 
 	for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_mips"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_mips"
+		return
+            fi
 	done
 
 	for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-			target="iopsys_brcm63xx_arm"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_brcm63xx_arm"
+		return
+            fi
 	done
 
 	for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-			target="iopsys_ramips"
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="iopsys_ramips"
+		return
+            fi
 	done
 
 	for p in $ramips; do
-		if [ $p == $profile ]; then
-			target="ramips"
-			masterconfig=0
-			return
-		fi
+            if [ $p == $profile ]; then
+		target="ramips"
+		masterconfig=0
+		return
+            fi
 	done
 
-	}
-
-	git remote -v | grep -q http || {
-		DEVELOPER=1
-
-		bcmAllowed=0
-		iceAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			esac
-		done
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
-		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -p|--profile\tSet profile (if exists) default juci"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo
-		echo "Example ./iop genconfig vg50 TELIA"
-		echo "(if no customerconfig is chosen the Inteno Config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common)"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$1" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common)"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
+    }
 
 
-	use_local_mirror()
-	{
-		if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null; then
-			echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
-			sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
-		else
-			echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
-		fi
-	}
+    git remote -v | grep -q http || {
+	DEVELOPER=1
 
-	generate_config()
-	{
+	bcmAllowed=0
+	iceAllowed=0
+	endptAllowed=0
+	natalieAllowed=0
+
+	allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -w 'R\|W' | awk '{print$NF}')"
+	for repo in $allowedRepos; do
+	    case $repo in
+		bcmkernel) bcmAllowed=1 ;;
+		ice-client) iceAllowed=1 ;;
+		endptcfg) endptAllowed=1 ;;
+		natalie-dect*) natalieAllowed=1 ;;
+	    esac
+	done
+    }
+
+    v() {
+	[ "$VERBOSE" -ge 1 ] && echo "$@"
+    }
+
+    usage() {
+        echo
+        echo 1>&2 "Usage: $0 [OPTIONS] BoardConfig Customerconfig"
+        echo
+	echo "  -c,  remove all files under ./files and import from config "
+	echo "  -v,  verbose"
+	echo "  -u, Update customer config before applying"  
+	echo "	-p, set profile (if exists)"
+	echo "	-t, use latest git tag and number of commits since as version for the build"
+	echo "  -s, enable 'Package source tree override'"
+	echo 
+        echo "BoardConfig ex "
+	ls -1 configs
+	if [ -d "$CUSTCONF/$1" ]; then
+            echo "Customerconfig ex"
+	    ls  $CUSTCONF/*
+	fi  
+	echo
+	echo "Example ./genconfig vg50 TELIA" 
+        echo "(if no customerconfig is chosen the Inteno Config will be used)"
+	echo 	
+        exit 127
+    }
+
+    use_local_mirror()
+    {
+	if wget -T 3 -t 2 -O /dev/null $LOCAL_MIRROR >/dev/null 2>/dev/null
+	then
+	    echo "mirror [$LOCAL_MIRROR] exists. Using local mirror"
+	    sed -i "s;CONFIG_LOCALMIRROR=.*;CONFIG_LOCALMIRROR=\"$LOCAL_MIRROR\";" .config
+	else
+	    echo "mirror [$LOCAL_MIRROR] does not exist. Not using local mirror"
+	fi
+    }
+
+    generate_config()
+    {
 	DIFFFILE="$1"
 	MASTERFILE="$2"
 	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
+	    v  "$p"
+	    sed -r -i "$p" $MASTERFILE
 	done < $DIFFFILE
-	}
+    }
 
-	setup_dirs()
-	{
-		if [ $DEVELOPER -eq 1 ]; then
-			if [ ! -d "$CUSTPATH" ]; then
-			git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-			cd $CUSTPATH
-			v "git pull"
-			git pull
-			cd - >/dev/null #go back
-			fi
-		fi
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-
-		if [ ! -d "$THEMEDIR" ]; then
-			mkdir -p $THEMEDIR
-		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $THEMEDIR/*"
-			rm -rf $THEMEDIR/*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		local CUSTOMER=$2
-
-		# Validate seleced board and customer
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-			echo "Customer profile does not exist"
-			exit 1
-		fi
-
-		# Generate base config
-		# Used only for iopsys targets, not openwrt targets
-		rm -f .config
-		if [ $masterconfig -eq 1 ]; then
-			v "Config $BOARDTYPE selected"
-			v "cp $CONFIGPATH/config .config"
-			cp $CONFIGPATH/config .config
-		fi
-
-		# Apply profile diff to master config if selected
-		if [ -n "$PROFILE" ]; then
-			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
-				cat $CONFIGPATH/$PROFILE.diff >> .config
-			elif [ "$PROFILE" == "juci" ]; then
-				v "Default profile (juci) is selected."
-			else
-				echo "ERROR: profile $PROFILE does not exist!"
-				exit 1
-			fi
-		else
-			v "No profile selected! Using default."
-		fi
-
-		# Set target and profile
-		echo "CONFIG_TARGET_${target}=y" >> .config
-		echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-
-		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMER" ]; then
-			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-			fi
-			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-			fi
-			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-			fi
-			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-			fi
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-
-		# Enable Pckage source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		if [ $DEVELOPER -eq 1 ]; then
-			# rewrite url to clone with ssh instead of http
-			echo "CONFIG_DEVEL=y" >>.config
-			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-		else
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ICE_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-		fi
-
-		# Force regeneration of themes
-		touch package/feeds/feed_inteno_juci/juci/Makefile
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		# Temporary fixup for juci/luci profile
-		if [ "$PROFILE" == "luci" ]; then
-			sed -i '/CONFIG_DEFAULT_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
-		fi
-
-		if [ $masterconfig -eq 1 ]; then
-			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-		fi
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
+    setup_dirs()
+    {
+	if [ $DEVELOPER -eq 1 ]; then
+	    if [ ! -d "$CUSTCONF" ]; then
+		git  clone  git@private.inteno.se:customerconfigs
+	    elif [ $IMPORT -eq 1 ]; then
+		cd customerconfigs
+		v "git pull"
+		git pull
+		cd ..
+	    fi
 	fi
 
-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
+
+	if [ ! -d "$FILEDIR" ]; then
+	    mkdir $FILEDIR
+	elif  [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
+	    v "rm -rf $FILEDIR*"	
+	    rm -rf $FILEDIR*
+	fi
+    }
+
+
+    create_and_copy_files()
+    {
+	local BOARDTYPE=$1
+	local CUSTOMER=$2
+
+	# Validate seleced board and customer
+	set_target $BOARDTYPE
+	if [ $target == "bogus" ]; then
+	    echo "Hardware profile does not exist"
+	    exit 1
+	elif [ -n "$CUSTOMER" -a ! -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/" ]; then
+	    echo "Customer profile does not exist"
+	    exit 1
+	fi
+
+	# Generate base config 
+	# Used only for iopsys targets, not openwrt targets
+	rm -f .config
+	if [ $masterconfig -eq 1 ]; then
+	    v  "Config $BOARDTYPE selected"
+	    v "cp  $CONFIGPATH/config  .config"
+	    cp  $CONFIGPATH/config  .config
+	fi
+
+	# Apply profile diff to master config if selected
+	if [ -n "$PROFILE" ]; then 
+	    if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+		cat $CONFIGPATH/$PROFILE.diff >> .config
+	    elif [ "$PROFILE" == "juci" ]; then
+		v "Default profile (juci) is selected."
+	    else
+		echo "ERROR: profile $PROFILE does not exist!"
+		exit 1
+	    fi
+	else 
+	    v "No profile selected! Using default."
+	fi
+	
+	# Set target and profile
+	echo "CONFIG_TARGET_${target}=y" >> .config
+	echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
+
+	echo "$BOARDTYPE $CUSTOMER" > .current_config_file
+
+	# Add customerconfig diff if a customer is selected
+	if [ -n "$CUSTOMER" ]; then
+	    if [ -d "$CUSTCONF/$BOARDTYPE/$CUSTOMER/fs" ]; then
+		v "cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR"
+		cp -rLp $CUSTCONF/$BOARDTYPE/$CUSTOMER/fs/* $FILEDIR
+	    fi
+	    if [ -e "$CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff" ]; then
+		v "Apply $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff"
+		cat $CUSTCONF/$BOARDTYPE/$CUSTOMER/$BOARDTYPE.diff >> .config
+	    fi
+	fi
+
+	# Set target version
+	local GIT_TAG=$(git describe --abbrev=0 --tags)
+	echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
+
+
+	# Enable Pckage source tree override if selected
+	[ $SRCTREEOVERR -eq 1 ] && \
+            echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
+
+
+	# developer mode selected ?
+	if [ $DEVELOPER -eq 1 ]; then
+	    # rewrite url to clone with ssh instead of http
+	    echo "CONFIG_DEVEL=y" >>.config
+	    echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
+	    [ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
+	    [ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
+	    [ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    [ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
 	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-		setup_dirs
-		create_and_copy_files "$1" "$2"
-
-		if [ $masterconfig -eq 1 ]; then
-			use_local_mirror
-		fi
+	    echo "CONFIG_BCM_OPEN=y" >> .config
+	    echo "CONFIG_ICE_OPEN=y" >> .config
+	    echo "CONFIG_ENDPT_OPEN=y" >> .config
+	    echo "CONFIG_NATALIE_OPEN=y" >> .config
 	fi
+	
+	# Force regeneration of kernel Makefile
+	# Needed to disable kmods for iopsys-brcm targets
+	touch package/kernel/linux/Makefile
+	
+	# Set default values based on selected parameters
+	make defconfig
+
+	# Temporary fixup for juci/luci profile
+	if [ "$PROFILE" == "luci" ]; then
+	    sed -i '/CONFIG_DEFAULT_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_juci/d' .config
+	    sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+	fi
+
+	if [ $masterconfig -eq 1 ]; then
+	    echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+	fi
+
+	# Clean base-file package to force rebuild when changing profile
+	make package/base-files/clean
+
+
+    }
+
+    ####### main #####
+    if [ ! -e tmp/.iop_bootstrap ]; then
+	echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
+	echo "Run: iop feeds_update"
+	exit 0
+    fi
+
+    if [ $# -eq 0 ]; then
+	echo Current profile:
+	cat .current_config_file
+	echo "Try ./iop_get_config.sh -h' to get instructions if you want to change current config"
+	exit 0
+    else
+	
+	while [ -n "$1" ]; do 
+	    case "$1" in
+
+		-c) export CLEAN=1;;
+		-u) export IMPORT=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-p) export PROFILE="$2"; shift;; 
+		-t) export USE_TAG=1;; 
+		-s) export SRCTREEOVERR=1;;
+		-h) usage;;
+		-*)
+		    echo "Invalid option: $1 "
+		    echo "Try  -h' for more information."
+		    exit 1
+		    ;;
+		*) break;;
+	    esac
+	    shift;
+	done
+	setup_dirs
+	create_and_copy_files "$1" "$2"
+
+	if [ $masterconfig -eq 1 ]; then
+	    use_local_mirror
+	fi
+    fi
 }
 
+
 register_command "genconfig" "Generate configuration for board and customer"

iop/scripts/update_package.sh

@@ -1,6 +1,5 @@
 #!/bin/bash
 
-UPDATE=0
 
 print_git_update()
 {
@@ -100,28 +99,6 @@ insert_hash_in_feed_makefile()
     (cd ${PKG_DIR}; git add ${name})
 }
 
-insert_version_in_feed_makefile()
-{
-    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
-    then
-	name="$PKG_SOURCE_VERSION_FILE"
-    else
-	name=Makefile
-    fi
-
-    last_version=$(awk -F '=' '/PKG_VERSION:=/ {print $2}' ${PKG_DIR}/${name})
-
-	echo -n "please enter version: "
-	read -ei "$last_version" answer
-
-	if [ -z ${answer} ]; then
-		return
-	fi
-
-    sed -i -e "s/\(^PKG_VERSION:=\).*/\1${answer}/" ${PKG_DIR}/${name}
-    (cd ${PKG_DIR}; git add ${name})
-}
-
 
 # BUG: fix if only local branche name!
 branch_uptodate()
@@ -423,7 +400,6 @@ check_packages()
 		    #  print_git_update
 		    git_repos_uptodate
 		    insert_hash_in_feed_makefile
-		    [ "${UPDATE}" ] && insert_version_in_feed_makefile
 		    create_message >tmp/msg
 		    commit_feed tmp/msg
 		    insert_hash_in_feeds_config
@@ -571,13 +547,6 @@ feeds_at_top()
     exit 0
 }
 
-usage(){
-	echo -e "$0 [flags]"
-	echo -e "flags:"
-	echo -e "  -v\tVerbose mode"
-	echo -e "  -h\tShow this help"
-	echo -e "  -u\tUpdate package version\n"
-}
 
 # Exported interface
 function update_package {
@@ -594,18 +563,15 @@ function update_package {
     Cyan='\033[0;36m'         # Cyan
     White='\033[0;37m'        # White
 
-    while getopts "v:hu" opt; do
+    while getopts "v:h" opt; do
 	case $opt in
 	    v)
 		verbose=$OPTARG
 		;;
 	    h)
-			usage
-			exit 1
-			;;
-		u)
-			UPDATE=1
-			;;
+		echo "some help! No options yet"
+		exit 1
+		;;
 	    \?)
 		echo "Invalid option: -$OPTARG" >&2
 		exit 1

iup/files/sbin/iup

@@ -381,14 +381,12 @@ done
 
 # Process IUP related DHCP options #
 if [ -n "$1" ]; then
-	local privopt224 privopt225 privopt226 vendorspecinf httpurl128
+	local privopt224 vendorspecinf httpurl128
 	local tftp bootfile vlanid vlanpriority interface
 
 	json_load "$1"
 	json_get_var interface interface
 	json_get_var privopt224 privopt224
-	json_get_var privopt225 privopt225
-	json_get_var privopt226 privopt226
 	json_get_var vendorspecinf vendorspecinf
 	json_get_var httpurl128 httpurl128
 	json_get_var tftp tftp
@@ -424,24 +422,6 @@ if [ -n "$1" ]; then
 	elif [ -n "$vlanid" ]; then
 		logger -t dhcp_opt132 "vlanid: ${vlanid}"
 		change_to_vlan ${vlanid} 0 ${interface}
-	elif [ -n "$privopt225" ] || [ -n "$privopt226" ]; then
-		# opt225 and opt226 can be used together or separatly
-		if [ -n "$privopt225" ]; then
-			echo "dhcp option 225: $privopt225" >/dev/console
-			# option225 is allowd to change only once per CPE
-			if [ "$(uci get -q ice.cloud.frozen)" != "1" ] ; then
-				uci set ice.cloud.frozen="1"
-				uci set ice.cloud.enabled="1"
-				uci set ice.cloud.server="$privopt225"
-			fi
-		fi
-		if [ -n "$privopt226" ]; then
-			echo "dhcp option 226: $privopt226" >/dev/console
-			[ -z "$(uci get -q ice.dhcp)" ] && uci set ice.dhcp="dhcp"
-			uci set ice.dhcp.opt226connectionid="$privopt226"
-			ubus send dhcp.opt226connectionid '{"opt226connectionid":"","value":"'$privopt226'"}'
-		fi
-		uci commit
 	fi
 
 	exit 0

layer2interface/broadcom/lib/network/brcmwifi.sh

@@ -85,7 +85,6 @@ wlmngr_doWlConf() {
 
 	#wlctl -i wl$idx nreqd $nreqd
 	wlconf wl$idx up
-	wlctl -i wl$idx obss_coex 1
 }
 
 wlmngr_setupMbssMacAddr() {
@@ -99,6 +98,22 @@ wlmngr_setupMbssMacAddr() {
 	done
 }
 
+#enableBSD() {
+#	nvram_set bsd_role=0
+#	[ act_wl_cnt == 0 ] && return FALSE
+#	for i in wl0 wl1; do
+#		if [ m_instance_wl[i].m_wlVar.wlEnbl == TRUE && m_instance_wl[i].m_wlVar.bsdRole > 0 ]; then
+#			nvram set bsd_role=m_instance_wl[i].m_wlVar.bsdRole
+#			nvram set bsd_pport=m_instance_wl[i].m_wlVar.bsdPport
+#			nvram set bsd_hpport=m_instance_wl[i].m_wlVar.bsdHport
+#			nvram set bsd_helper=m_instance_wl[i].m_wlVar.bsdHelper
+#			nvram set bsd_primary=m_instance_wl[i].m_wlVar.bsdPrimary
+#			return TRUE
+#		fi
+#	done
+#	return FALSE
+#}
+
 #enableSSD() {
 #	nvram set ssd_enable=0
 #	[ act_wl_cnt == 0 ] && return FALSE
@@ -154,89 +169,6 @@ wlmngr_startServices() {
 #	}
 }
 
-enableBSD() {
-	local wdev wdev_to_steer
-	local enabled policy
-	local rssi_threshold bw_util
-
-	nvram set bsd_role=0
-	nvram unset bsd_ifnames
-
-	enabled="$(uci -q get wireless.bandsteering.enabled)"
-
-	[ "$enabled" == "1" ] || return 1
-
-	policy="$(uci -q get wireless.bandsteering.policy)"
-	policy=${policy:-0}
-	rssi_threshold="$(uci -q get wireless.bandsteering.rssi_threshold)"
-	rssi_threshold=${rssi_threshold:--75}
-	bw_util="$(uci -q get wireless.bandsteering.bw_util)"
-	bw_util=${bw_util:--60}
-
-	nvram set bsd_role=3
-	nvram set bsd_pport=9878
-	nvram set bsd_hpport=9877
-	nvram set bsd_helper=192.168.1.2
-	nvram set bsd_primary=192.168.1.1
-	nvram set bsd_scheme=2
-	nvram set bsd_poll_interval=1
-	nvram set bsd_bounce_detect="180 8 3600"
-	nvram set bsd_msglevel=0
-	nvram set bsd_status_poll=5
-	nvram set bsd_status=3
-
-	for wdev in wl0 wl1; do
-		#if [ "$(uci -q get wireless.$wdev.band_steering)" == "1" ]; then
-			nvram set bsd_ifnames="$(nvram get bsd_ifnames) $wdev"
-			[ "$wdev" == "wl0" ] && wdev_to_steer="wl1" || wdev_to_steer="wl0"
-
-			if [ "$policy" == "0" ]; then
-				# RSSI Threshold based policy #
-				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
-					# 2.4G
-					nvram set ${wdev}_bsd_if_quality_policy="0 0x0 -100"
-					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="10 0 0 0 1 1 0 0 0 0x400"
-					nvram set ${wdev}_bsd_steer_prefix=$wdev
-					nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x1"
-				else
-					# 5G
-					nvram set ${wdev}_bsd_if_quality_policy="20 0x0 $rssi_threshold"
-					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="100 0 0 0 0 1 0 0 0 0x40"
-					nvram set ${wdev}_bsd_steer_prefix=$wdev
-					nvram set ${wdev}_bsd_steering_policy="80 5 3 $rssi_threshold 0 0x40"
-				fi
-			else
-				# Bandwidth Usage based policy #
-				if [ "$(nvram get ${wdev}_nband)" == "2" ]; then
-					# 2.4G
-					nvram set ${wdev}_bsd_if_quality_policy="0 0x0 -75"
-					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x600"
-					nvram set ${wdev}_bsd_steer_prefix=$wdev
-					nvram set ${wdev}_bsd_steering_policy="0 5 3 0 0 0x10"
-				else
-					# 5G
-					nvram set ${wdev}_bsd_if_quality_policy="40 0x0 -75"
-					nvram set ${wdev}_bsd_if_select_policy=$wdev_to_steer
-					nvram set ${wdev}_bsd_sta_select_policy="0 0 0 0 0 1 0 0 0 0x240"
-					nvram set ${wdev}_bsd_steer_prefix=$wdev
-					nvram set ${wdev}_bsd_steering_policy="$bw_util 5 3 0 0 0x40"
-				fi
-			fi
-		#fi
-	done
-	return 0
-}
-
-wlmngr_BSDCtrl() {
-	killall -q -15 bsd 2>/dev/null
-	if $(enableBSD); then
-		bsd&
-	fi
-}
-
 wlmngr_startWsc()
 {
 	local idx=$1
@@ -308,20 +240,6 @@ wlmngr_wlIfcUp() {
 			ifconfig $vif down
 		fi
 	done
-
-	case "$(uci -q get wireless.wl$idx.monitor)" in
-		1)
-			wlctl -i wl$idx monitor 1
-			ifconfig prism$idx up
-		;;
-		2)
-			wlctl -i wl$idx monitor 2
-			ifconfig radiotap$idx up
-		;;
-		*)
-			wlctl -i wl$idx monitor 0
-		;;
-	esac
 }
 
 wlmngr_doWds() {
@@ -354,7 +272,6 @@ wlmngr_finalize() {
 #	local isac="$(db get hw.$pcid.is_ac)"
 #	if [ "$isac" == "1" ]; then
 #		wlctl -i $device msglevel +radar +dfs
-#		#dhdctl -i $device dconpoll 200
 #	fi
 	local rdrthrs="$(db get hw.$pcid.radarthrs)"
 	if [ -n "$rdrthrs" ]; then

libtrace/Makefile

@@ -1,84 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libtrace
-PKG_VERSION:=3.0.22
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/apietila/libtrace.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_VERSION:=HEAD
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_INSTALL:=1
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/uclibc++.mk
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libtrace/Default
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Libtrace library for packet trace processing
-  URL:=http://research.wand.net.nz/software/libtrace.php
-endef
-
-define Package/libtrace
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Libtrace library for packet trace processing
-  URL:=http://research.wand.net.nz/software/libtrace.php
-  DEPENDS:=+libpcap +libpthread +zlib +libbz2 +liblzo +librt $(CXX_DEPENDS)
-endef
-
-define Package/libtrace/description
-	Network trace processing library for trace processing. Supports multiple 
-	input methods, including device capture, raw and gz-compressed 
-	trace, and sockets.
-endef
-
-define Package/libtrace-tools
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Libtrace tools for packet trace processing
-  URL:=http://research.wand.net.nz/software/libtrace.php
-  DEPENDS:=+libncurses +libtrace
-endef
-
-define Package/libtrace-tools/description
-	Network trace processing tools for trace processing.
-endef
-
-CONFIGURE_ARGS += \
-        --with-bzip2 \
-        --with-zlib \
-	--with-lzo \
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/* $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libtrace.{a,so*} $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libwandio.{a,so*} $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.{a,so*} $(1)/usr/lib/
-endef
-
-define Package/libtrace/install    
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libtrace.so.* $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libwandio.so.* $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.so.* $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/libpacketdump
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump/*.so* $(1)/usr/lib/libpacketdump/
-endef
-
-define Package/libtrace-tools/install    
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/{traceanon,tracediff,traceends,tracepktdump,tracereplay,tracereport,tracertstats,tracesplit,tracestats} $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,libtrace))
-$(eval $(call BuildPackage,libtrace-tools))
-

logrotate/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=logrotate
-PKG_VERSION:=3.7.1
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).orig.tar.gz
-PKG_SOURCE_URL:=http://ftp.de.debian.org/debian/pool/main/l/logrotate
-PKG_MD5SUM:=552639142e163745f6bcd4f1f3816d8a
-PKG_CAT:=zcat
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/logrotate
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libpopt
-  TITLE:=rotates, compresses, and mails system logs
-endef
-
-define Build/Compile
-	$(call Build/Compile/Default, \
-		RPM_OPT_FLAGS="$(TARGET_CFLAGS) $(EXTRA_CPPFLAGS)" \
-		LDFLAGS="$(EXTRA_LDFLAGS)" \
-		logrotate \
-	)
-endef
-
-define Package/logrotate/install	
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) ${PKG_BUILD_DIR}/logrotate $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc
-	$(CP) ./files/logrotate.conf $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/logrotate.d
-endef
-
-$(eval $(call BuildPackage,logrotate))

logrotate/files/logrotate.conf

@@ -1,30 +0,0 @@
-# rotate log files weekly
-weekly
-#daily
-
-# keep 4 weeks worth of backlogs
-rotate 4
-
-# create new (empty) log files after rotating old ones
-create
-
-notifempty
-nomail
-#olddir /var/log/backup/
-missingok
-#dateext
-
-# uncomment this if you want your log files compressed
-#compress
-
-# packages can drop log rotation information into this directory
-include /etc/logrotate.d
-
-# no packages own lastlog or wtmp -- we'll rotate them here
-#/var/log/wtmp {
-#    monthly
-#    create 0664 root utmp
-#    rotate 1
-#}
-
-# system-specific logs may be also be configured here.

logrotate/patches/01-dateext_maxage.patch

@@ -1,433 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/config.c logrotate-3.7.1/config.c
---- logrotate-3.7.1.orig/config.c	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/config.c	2005-05-24 12:21:09.000000000 -0400
-@@ -511,6 +511,14 @@
- 		newlog->flags &= ~LOG_FLAG_IFEMPTY;
- 
- 		*endtag = oldchar, start = endtag;
-+	    } else if (!strcmp(start, "dateext")) {
-+		newlog->flags |= LOG_FLAG_DATEEXT;
-+
-+		*endtag = oldchar, start = endtag;
-+	    } else if (!strcmp(start, "nodateext")) {
-+		newlog->flags &= ~LOG_FLAG_DATEEXT;
-+
-+		*endtag = oldchar, start = endtag;
- 	    } else if (!strcmp(start, "noolddir")) {
- 		newlog->oldDir = NULL;
- 
-@@ -670,6 +678,21 @@
- 		    }
- 		    *endtag = oldchar, start = endtag;
- 		}
-+	    } else if (!strcmp(start, "maxage")) {
-+		*endtag = oldchar, start = endtag;
-+
-+		if (!isolateValue(configFile, lineNum, "maxage count", &start,
-+				  &endtag)) {
-+		    oldchar = *endtag, *endtag = '\0';
-+
-+		    newlog->rotateAge = strtoul(start, &chptr, 0);
-+		    if (*chptr || newlog->rotateAge < 0) {
-+			message(MESS_ERROR, "%s:%d bad maximum age '%s'\n",
-+				configFile, lineNum, start);
-+			return 1;
-+		    }
-+		    *endtag = oldchar, start = endtag;
-+		}
- 	    } else if (!strcmp(start, "errors")) {
- 		message(MESS_DEBUG, "%s: %d: the errors directive is deprecated and no longer used.\n",
- 			configFile, lineNum);
-diff -u -ruN logrotate-3.7.1.orig/logrotate.8 logrotate-3.7.1/logrotate.8
---- logrotate-3.7.1.orig/logrotate.8	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/logrotate.8	2005-05-24 12:21:09.000000000 -0400
-@@ -200,6 +200,11 @@
- Log files are rotated every day.
- 
- .TP
-+\fBdateext\fR
-+Archive old versions of log files adding a daily extension like YYYYMMDD
-+instead of simply adding a number.
-+
-+.TP
- \fBdelaycompress\fR
- Postpone compression of the previous log file to the next rotation cycle.
- This has only effect when used in combination with \fBcompress\fR.
-@@ -246,6 +251,12 @@
- instead of the just-rotated file (this is the default).
- 
- .TP
-+\fBmaxage\fR \fIcount\fR
-+Remove rotated logs older than <count> days. The age is only checked
-+if the logfile is to be rotated. The files are mailed to the
-+configured address if \fBmaillast\fR and \fBmail\fR are configured.
-+
-+.TP
- \fBmissingok\fR
- If the log file is missing, go on to the next one without issuing an error
- message. See also \fBnomissingok\fR.
-diff -u -ruN logrotate-3.7.1.orig/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1.orig/logrotate.c	2004-10-19 17:41:24.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-24 12:21:09.000000000 -0400
-@@ -11,6 +11,7 @@
- #include <sys/wait.h>
- #include <time.h>
- #include <unistd.h>
-+#include <glob.h>
- 
- #ifdef WITH_SELINUX
- #include <selinux/selinux.h>
-@@ -22,6 +23,10 @@
- #include "log.h"
- #include "logrotate.h"
- 
-+#if !defined(GLOB_ABORTED) && defined(GLOB_ABEND)
-+#define GLOB_ABORTED GLOB_ABEND
-+#endif
-+
- typedef struct {
-     char * fn;
-     struct tm lastRotated;	/* only tm.mon, tm_mday, tm_year are good! */
-@@ -42,6 +47,14 @@
- char * mailCommand = DEFAULT_MAIL_COMMAND;
- time_t nowSecs = 0;
- 
-+static int globerr(const char * pathname, int theerr) {
-+    message(MESS_ERROR, "error accessing %s: %s\n", pathname,
-+	strerror(theerr));
-+
-+    /* We want the glob operation to continue, so return 0 */
-+    return 1;
-+}
-+
- static logState * findState(const char * fn, struct stateSet * sip) {
-     int i;
-     logState * states = sip->states;
-@@ -49,9 +62,11 @@
-     struct tm now = *localtime(&nowSecs);
-     time_t lr_time;
- 
-+    /* find the filename fn in the statesPtr list */
-     for (i = 0; i < numStates; i++) 
- 	if (!strcmp(fn, states[i].fn)) break;
- 
-+    /* not in statesPtr list, so add new entry */
-     if (i == numStates) {
- 	i = numStates++;
- 	states = realloc(states, sizeof(*states) * numStates);
-@@ -121,6 +136,17 @@
-     return rc;
- }
- 
-+static int removeLogFile(char * name) {
-+    message(MESS_DEBUG, "removing old log %s\n", name);
-+
-+    if (!debug && unlink(name)) {
-+	message(MESS_ERROR, "Failed to remove old log %s: %s\n",
-+		name, strerror(errno));
-+	return 1;
-+    }
-+    return 0;
-+}
-+
- static int compressLogFile(char * name, logInfo * log, struct stat *sb) {
-     char * compressedName;
-     const char ** fullCommand;
-@@ -265,6 +291,25 @@
-     return rc;
- }
- 
-+static int mailLogWrapper (char * mailFilename, char * mailCommand, int logNum, logInfo * log) {
-+    /* if the log is compressed (and we're not mailing a
-+     * file whose compression has been delayed), we need
-+     * to uncompress it */
-+    if ((log->flags & LOG_FLAG_COMPRESS) &&
-+	!((log->flags & LOG_FLAG_DELAYCOMPRESS) &&
-+	    (log->flags & LOG_FLAG_MAILFIRST))) {
-+	if (mailLog(mailFilename, mailCommand,
-+		    log->uncompress_prog, log->logAddress,
-+		    log->files[logNum]))
-+	    return 1;
-+    } else {
-+	if (mailLog(mailFilename, mailCommand, NULL,
-+		    log->logAddress, mailFilename))
-+	    return 1;
-+    }
-+    return 0;
-+}
-+
- static int copyTruncate(char * currLog, char * saveLog, struct stat * sb, int flags) {
-     char buf[BUFSIZ];
-     int fdcurr = -1, fdsave = -1;
-@@ -479,6 +524,9 @@
-     char * baseName;
-     char * dirName;
-     char * firstRotated;
-+    char * glob_pattern;
-+    glob_t globResult;
-+    int rc;
-     size_t alloc_size;
-     int rotateCount = log->rotateCount ? log->rotateCount : 1;
-     int logStart = (log->logStart == -1) ? 1 : log->logStart;
-@@ -509,7 +557,7 @@
- 
-     alloc_size = strlen(dirName) + strlen(baseName) + 
-                  strlen(log->files[logNum]) + strlen(fileext) +
--                 strlen(compext) + 10;
-+                 strlen(compext) + 18;
-     
-     oldName = alloca(alloc_size);
-     newName = alloca(alloc_size);
-@@ -531,16 +579,116 @@
-     /* First compress the previous log when necessary */
-     if (log->flags & LOG_FLAG_COMPRESS &&
-         log->flags & LOG_FLAG_DELAYCOMPRESS) {
--        struct stat sbprev;
--	
--        sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
--        if (stat(oldName, &sbprev)) {
--            message(MESS_DEBUG, "previous log %s does not exist\n",
--		    oldName);
--        } else {
--	    hasErrors = compressLogFile(oldName, log, &sbprev);
-+	if (log->flags & LOG_FLAG_DATEEXT) {
-+	               /* glob for uncompressed files with our pattern */
-+	    glob_pattern = malloc(strlen(dirName) + strlen(baseName)
-+				  + strlen(fileext) + 44 );
-+	    sprintf(glob_pattern,
-+		    "%s/%s-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]%s",
-+		    dirName, baseName, fileext);
-+	    rc = glob(glob_pattern, 0, globerr, &globResult);
-+	    if (!rc && globResult.gl_pathc > 0) {
-+		for (i = 0; i < globResult.gl_pathc && !hasErrors; i++) {
-+		    struct stat sbprev;
-+		    sprintf(oldName,"%s",(globResult.gl_pathv)[i]);
-+		    if (stat(oldName, &sbprev)) {
-+			message(MESS_DEBUG, "previous log %s does not exist\n", oldName);
-+		    } else {
-+			hasErrors = compressLogFile(oldName, log, &sbprev);
-+		    }
-+		}
-+	    } else {
-+		message (MESS_DEBUG, "glob finding logs to compress failed\n");
-+		/* fallback to old behaviour */
-+		sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+	    }
-+	    globfree(&globResult);
-+	    free(glob_pattern);
-+	} else {
-+	    struct stat sbprev;
-+
-+	    sprintf(oldName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+	    if (stat(oldName, &sbprev)) {
-+		message(MESS_DEBUG, "previous log %s does not exist\n",
-+			oldName);
-+	    } else {
-+		hasErrors = compressLogFile(oldName, log, &sbprev);
-+	    }
- 	}
-     }
-+
-+    firstRotated = alloca(strlen(dirName) + strlen(baseName) +
-+			  strlen(fileext) + strlen(compext) + 30);
-+
-+    if(log->flags & LOG_FLAG_DATEEXT) {
-+	/* glob for compressed files with our pattern
-+	 * and compress ext */
-+	glob_pattern = malloc(strlen(dirName)+strlen(baseName)
-+			      +strlen(fileext)+strlen(compext)+44);
-+	sprintf(glob_pattern,
-+		"%s/%s-[0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]%s%s",
-+		dirName, baseName, fileext, compext);
-+	rc = glob(glob_pattern, 0, globerr, &globResult);
-+	if (!rc) {
-+	    /* search for files to drop, if we find one remember it,
-+	     * if we find another one mail and remove the first and
-+	     * remember the second and so on */
-+	    struct stat fst_buf;
-+	    int mail_out = -1;
-+	    /* remove the first (n - rotateCount) matches
-+	     * no real rotation needed, since the files have
-+	     * the date in their name */
-+	    for (i = 0; i < globResult.gl_pathc; i++) {
-+		if( !stat((globResult.gl_pathv)[i],&fst_buf) ) {
-+		    if ((i <= ((int)globResult.gl_pathc - rotateCount)) 
-+			|| ((log->rotateAge > 0)
-+			    && (((nowSecs - fst_buf.st_mtime)/60/60/24)
-+				> log->rotateAge))) {
-+			if ( mail_out != -1 ) {
-+			    if (!hasErrors && log->logAddress) {
-+				char * mailFilename = (globResult.gl_pathv)[mail_out];
-+				hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-+				if (!hasErrors)
-+				    hasErrors = removeLogFile(mailFilename);
-+			    }
-+			}
-+			mail_out = i;
-+		    }
-+		}
-+	    }
-+	    if ( mail_out != -1 ) {
-+		/* oldName is oldest Backup found (for unlink later) */
-+		sprintf(oldName, "%s", (globResult.gl_pathv)[mail_out]);
-+		strcpy(disposeName, oldName);
-+	    } else
-+		disposeName = NULL;
-+	} else {
-+	    message (MESS_DEBUG, "glob finding old rotated logs failed\n");
-+	    disposeName = NULL;
-+	}
-+	/* firstRotated is most recently created/compressed rotated log */
-+	sprintf(firstRotated, "%s/%s-%04d%02d%02d%s%s",
-+		dirName, baseName, now.tm_year+1900,
-+		now.tm_mon+1, now.tm_mday, fileext, compext);
-+	globfree(&globResult);
-+	free(glob_pattern);
-+    } else {
-+	if ( log->rotateAge ) {
-+	    struct stat fst_buf;
-+	    for (i=1; i <= rotateCount; i++) {
-+		sprintf(oldName, "%s/%s.%d%s%s", dirName, baseName,
-+			rotateCount + 1, fileext, compext);
-+		if(!stat(oldName,&fst_buf)
-+		    && (((nowSecs - fst_buf.st_mtime)/60/60/24)
-+			> log->rotateAge)) {
-+		    char * mailFilename = (globResult.gl_pathv)[i];
-+		    if (!hasErrors && log->logAddress)
-+			hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-+		    if (!hasErrors)
-+			hasErrors = removeLogFile(mailFilename);
-+		}
-+	    }
-+	}
-     
-     sprintf(oldName, "%s/%s.%d%s%s", dirName, baseName,
-             logStart + rotateCount, fileext, compext);
-@@ -548,8 +696,6 @@
-     
-     strcpy(disposeName, oldName);
-     
--    firstRotated = alloca(strlen(dirName) + strlen(baseName) +
--                          strlen(fileext) + strlen(compext) + 30);
-     sprintf(firstRotated, "%s/%s.%d%s%s", dirName, baseName,
-             logStart, fileext, 
- 	    (log->flags & LOG_FLAG_DELAYCOMPRESS) ? "" : compext);
-@@ -600,12 +746,27 @@
- 	    }
- 	}
-     }
--    
-+    } /* !LOG_FLAG_DATEEXT */
-+ 
-     finalName = oldName;
--    
--    /* note: the gzip extension is *not* used here! */
--    sprintf(finalName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
--    
-+
-+    if(log->flags & LOG_FLAG_DATEEXT) {
-+	char * destFile = alloca(strlen(dirName) + strlen(baseName) +
-+				 strlen(fileext) + strlen(compext) + 30);
-+	struct stat fst_buf;
-+	sprintf(finalName, "%s/%s-%04d%02d%02d%s",
-+		dirName, baseName, now.tm_year+1900,
-+		now.tm_mon+1, now.tm_mday, fileext);
-+	sprintf(destFile, "%s%s", finalName, compext);
-+	if(!stat(destFile,&fst_buf)) {
-+	    message (MESS_DEBUG, "destination %s already exists, skipping rotation\n", firstRotated);
-+	    hasErrors = 1;
-+	}
-+    } else {
-+	/* note: the gzip extension is *not* used here! */
-+	sprintf(finalName, "%s/%s.%d%s", dirName, baseName, logStart, fileext);
-+    }
-+ 
-     /* if the last rotation doesn't exist, that's okay */
-     if (!debug && access(disposeName, F_OK)) {
-         message(MESS_DEBUG, "log %s doesn't exist -- won't try to "
-@@ -613,9 +774,6 @@
-         disposeName = NULL;
-     } 
-     
--    free(dirName);
--    free(baseName);
--    
-     if (!hasErrors) {
-         if (log->pre && !(log->flags & LOG_FLAG_SHAREDSCRIPTS)) {
-             message(MESS_DEBUG, "running prerotate script\n");
-@@ -722,33 +880,12 @@
-             else
-                 mailFilename = disposeName;
- 
--            if (mailFilename) {
--		/* if the log is compressed (and we're not mailing a
--		   file whose compression has been delayed), we need
--		   to uncompress it */
--                if ((log->flags & LOG_FLAG_COMPRESS) &&
--		    !((log->flags & LOG_FLAG_DELAYCOMPRESS) &&
--		      (log->flags & LOG_FLAG_MAILFIRST))) {
--		    if (mailLog(mailFilename, mailCommand, 
--				log->uncompress_prog, log->logAddress, 
--				log->files[logNum])) 
--			hasErrors = 1;
--		} else {
--		    if (mailLog(mailFilename, mailCommand, NULL, 
--			        log->logAddress, mailFilename))
--			hasErrors = 1;
--		}
--	    }
-+            if (mailFilename)
-+		hasErrors = mailLogWrapper(mailFilename, mailCommand, logNum, log);
-         }
- 	
-         if (!hasErrors && disposeName) {
--            message(MESS_DEBUG, "removing old log %s\n", disposeName);
--	    
--            if (!debug && unlink(disposeName)) {
--                message(MESS_ERROR, "Failed to remove old log %s: %s\n",
--			disposeName, strerror(errno));
--                hasErrors = 1;
--	    }
-+	    hasErrors = removeLogFile(disposeName);
- 	}
-     }
-     
-@@ -761,6 +898,8 @@
- 	  }
- 	}
- #endif
-+    free(dirName);
-+    free(baseName);
-     return hasErrors;
- }
- 
-@@ -1047,7 +1186,9 @@
- 
- int main(int argc, const char ** argv) {
-     logInfo defConfig = { NULL, NULL, 0, NULL, ROT_SIZE, 
--			  /* threshHold */ 1024 * 1024, 0,
-+			  /* threshHold */ 1024 * 1024,
-+			  /* rotateCount */ 0,
-+			  /* rotateAge */ 0,
- 			  /* log start */ -1,
- 			  /* pre, post */ NULL, NULL,
- 			  /* first, last */ NULL, NULL,
-diff -u -ruN logrotate-3.7.1.orig/logrotate.h logrotate-3.7.1/logrotate.h
---- logrotate-3.7.1.orig/logrotate.h	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/logrotate.h	2005-05-24 12:21:09.000000000 -0400
-@@ -15,6 +15,7 @@
- #define LOG_FLAG_MAILFIRST	(1 << 6)
- #define LOG_FLAG_SHAREDSCRIPTS	(1 << 7)
- #define LOG_FLAG_COPY		(1 << 8)
-+#define LOG_FLAG_DATEEXT	(1 << 9)
- 
- #define NO_FORCE_ROTATE 0
- #define FORCE_ROTATE    1
-@@ -34,6 +35,7 @@
-     enum { ROT_DAYS, ROT_WEEKLY, ROT_MONTHLY, ROT_SIZE, ROT_FORCE } criterium;
-     unsigned int threshhold;
-     int rotateCount;
-+    int rotateAge;
-     int logStart;
-     char * pre, * post, * first, * last;
-     char * logAddress;

logrotate/patches/02-datehack.patch

@@ -1,12 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1.orig/logrotate.c	2004-10-19 17:41:24.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-24 12:12:26.000000000 -0400
-@@ -1002,7 +1002,7 @@
- 	}
- 	
- 	/* Hack to hide earlier bug */
--	if ((year != 1900) && (year < 1996 || year > 2100)) {
-+	if ((year != 1900) && (year < 1970 || year > 2100)) {
- 	    message(MESS_ERROR, "bad year %d for file %s in state file %s\n",
- 		    year, argv[0], stateFilename);
- 	    fclose(f);

logrotate/patches/03-ignore_hidden.patch

@@ -1,14 +0,0 @@
---- logrotate-3.7/config.c.orig	2005-04-26 22:57:53.000000000 -0400
-+++ logrotate-3.7/config.c	2005-04-26 22:59:36.000000000 -0400
-@@ -142,6 +142,11 @@
- 	(!fname[1] || (fname[1] == '.' && !fname[2])))
- 	return 0;
- 
-+    /* Don't include 'hidden' files either; this breaks Gentoo 
-+       portage config file management http://bugs.gentoo.org/87683 */
-+    if (fname[0] == '.')
-+	return 0;
-+
-     /* Check if fname is ending in a taboo-extension; if so, return
-        false */
-     for (i = 0; i < tabooCount; i++) {

logrotate/patches/04-no_tmpdir.patch

@@ -1,54 +0,0 @@
-diff -u -ruN logrotate-3.7.1-cur/logrotate.c logrotate-3.7.1/logrotate.c
---- logrotate-3.7.1-cur/logrotate.c	2005-05-25 18:20:41.000000000 -0400
-+++ logrotate-3.7.1/logrotate.c	2005-05-25 18:21:10.000000000 -0400
-@@ -90,10 +90,7 @@
- }
- 
- static int runScript(char * logfn, char * script) {
--    int fd;
--    char *filespec;
-     int rc;
--    char buf[256];
- 
-     if (debug) {
- 	message(MESS_DEBUG, "running script with arg %s: \"%s\"\n", 
-@@ -101,38 +98,12 @@
- 	return 0;
-     }
- 
--    filespec = buf;
--    snprintf(buf, sizeof(buf), "%s/logrotate.XXXXXX", getenv("TMPDIR") ?: "/tmp");
--    fd = -1;
--    if (!filespec || (fd = mkstemp(filespec)) < 0 || fchmod(fd, 0700)) {
--	message(MESS_DEBUG, "error creating %s: %s\n", filespec,
--		strerror(errno));
--	if (fd >= 0) {
--	    close(fd);
--	    unlink(filespec);
--	}
--	return -1;
--    }
--
--    if (write(fd, "#!/bin/sh\n\n", 11) != 11 ||
--	write(fd, script, strlen(script)) != strlen(script)) {
--	message(MESS_DEBUG, "error writing %s\n", filespec);
--	close(fd);
--	unlink(filespec);
--	return -1;
--    }
--
--    close(fd);
--
-     if (!fork()) {
--	execlp(filespec, filespec, logfn, NULL);
-+	execl("/bin/sh", "sh", "-c", script, NULL);
- 	exit(1);
-     }
- 
-     wait(&rc);
--
--    unlink(filespec);
--
-     return rc;
- }
- 

logrotate/patches/05-taboo_to_debug.patch

@@ -1,12 +0,0 @@
-diff -u -ruN logrotate-3.7.1.orig/config.c logrotate-3.7.1/config.c
---- logrotate-3.7.1.orig/config.c	2003-08-07 07:13:14.000000000 -0400
-+++ logrotate-3.7.1/config.c	2005-05-24 12:13:41.000000000 -0400
-@@ -147,7 +147,7 @@
-     for (i = 0; i < tabooCount; i++) {
- 	if (!strcmp(fname + strlen(fname) - strlen(tabooExts[i]),
- 	    tabooExts[i])) {
--	    message(MESS_ERROR, "Ignoring %s, because of %s "
-+	    message(MESS_DEBUG, "Ignoring %s, because of %s "
- 		    "ending\n", fname, tabooExts[i]);
- 
- 	    return 0;

logrotate/patches/06-weekly.patch

@@ -1,22 +0,0 @@
---- logrotate-3.7.1-old/logrotate.c	2004-10-19 23:41:24.000000000 +0200
-+++ logrotate-3.7.1-new/logrotate.c	2005-10-02 17:29:22.380767321 +0200
-@@ -424,12 +424,15 @@ int findNeedRotating(logInfo * log, int 
-         switch (log->criterium) {
-           case ROT_WEEKLY:
-             /* rotate if:
--                  1) the current weekday is before the weekday of the
--                     last rotation
-+                  1) the day of the week is the same as the day of the week of
-+                     the previous rotation but not the same day of the year
-+                     this will rotate it on the same day every week, but not
-+                     twice a day.
-                   2) more then a week has passed since the last
-                      rotation */
--            state->doRotate = ((now.tm_wday < state->lastRotated.tm_wday) ||
--			       ((mktime(&now) - mktime(&state->lastRotated)) >
-+            state->doRotate = ((now.tm_wday == state->lastRotated.tm_wday &&
-+				now.tm_yday != state->lastRotated.tm_yday) ||
-+				((mktime(&now) - mktime(&state->lastRotated)) >
- 				(7 * 24 * 3600)));
-             break;
-           case ROT_MONTHLY:

multiwan/files/usr/bin/multiwan

@@ -27,9 +27,9 @@ failover() {
 
     add() {
 
-	wan_fail_map=$(echo $wan_fail_map | sed -e "s/\(^\|.*\]\)${1}\[${failchk}\]/\1/g")
+	wan_fail_map=$(echo $wan_fail_map | sed -e "s/${1}\[${failchk}\]//g")
 	wan_fail_map="$wan_fail_map${1}[x]"
-	wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/\(^\|.*\]\)${1}\[${recvrychk}\]/\1/g")
+	wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/${1}\[${recvrychk}\]//g")
 	update_cache
 
 	if [ "$existing_failover" == "2" ]; then
@@ -46,8 +46,8 @@ failover() {
 
     del() {
 
-	wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/\(^\|.*\]\)${1}\[${recvrychk}\]/\1/g")
-	wan_fail_map=$(echo $wan_fail_map | sed -e "s/\(^\|.*\]\)${1}\[${failchk}\]/\1/g")
+	wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/${1}\[${recvrychk}\]//g")
+	wan_fail_map=$(echo $wan_fail_map | sed -e "s/${1}\[${failchk}\]//g")
 	update_cache
 
 	if [ "$existing_failover" == "3" ]; then
@@ -70,7 +70,7 @@ fail_wan() {
 
     local failchk=$(query_config failchk $1)
     local recvrychk=$(query_config recvrychk $1)
-    wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/\(^\|.*\]\)${1}\[${recvrychk}\]/\1/g")
+    wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/${1}\[${recvrychk}\]//g")
 
     if [ -z "$failchk" ]; then
 	failchk=1
@@ -80,7 +80,7 @@ fail_wan() {
     if [ "$failchk" != "x" ]; then
 	new_fail_count=$(($failchk + 1))
 	if [ "$new_fail_count" -lt "$health_fail_retries" ]; then
-	    wan_fail_map=$(echo $wan_fail_map | sed -e "s/\(^\|.*\]\)${1}\[${failchk}\]/\1${1}\[${new_fail_count}\]/g")
+	    wan_fail_map=$(echo $wan_fail_map | sed -e "s/${1}\[${failchk}\]/$1\[${new_fail_count}\]/g")
 	else
 	    failover add $1
 	    refresh_dns
@@ -103,7 +103,7 @@ recover_wan() {
     local wanid=$(query_config wanid $1)
 
     if [ ! -z "$failchk" -a "$failchk" != "x" ]; then
-	wan_fail_map=$(echo $wan_fail_map | sed -e "s/\(^\|.*\]\)${1}\[${failchk}\]/\1/g")
+	wan_fail_map=$(echo $wan_fail_map | sed -e "s/${1}\[${failchk}\]//g")
 	update_cache
     fi
 
@@ -117,7 +117,7 @@ recover_wan() {
 	else
 	    new_recovery_count=$(($recvrychk + 1))
 	    if [ "$new_recovery_count" -lt "$health_recovery_retries" ]; then
-		wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/\(^\|.*\]\)${1}\[${recvrychk}\]/\1${1}\[${new_recovery_count}\]/g")
+		wan_recovery_map=$(echo $wan_recovery_map | sed -e "s/${1}\[${recvrychk}\]/$1\[${new_recovery_count}\]/g")
 		update_cache
 	    else
 		failover del $1
@@ -138,12 +138,11 @@ acquire_wan_data() {
     local old_gateway
 
     local ifname ipaddr gateway
-	network_flush_cache
     network_get_device  ifname  ${1} || ifname=x
     network_get_ipaddr  ipaddr  ${1} || ipaddr=x
     network_get_gateway gateway ${1} || gateway=x
 
-    check_old_map=$(echo $wan_id_map 2>&1 | grep -o -e "^$1\[" -e "\]$1\[")
+    check_old_map=$(echo $wan_id_map 2>&1 | grep -o "$1\[")
 
     if [ -z $check_old_map ]; then
 	wancount=$(($wancount + 1))
@@ -161,9 +160,9 @@ acquire_wan_data() {
 	old_ifname=$(query_config ifname $1)
 	get_wanid=$(query_config wanid $1)
 
-	wan_if_map=$(echo $wan_if_map | sed -e "s/\(^\|.*\]\)${1}\[${old_ifname}\]/\1${1}\[${ifname}\]/g")
-	wan_ip_map=$(echo $wan_ip_map | sed -e "s/\(^\|.*\]\)${1}\[${old_ipaddr}\]/\1${1}\[${ipaddr}\]/g")
-	wan_gw_map=$(echo $wan_gw_map | sed -e "s/\(^\|.*\]\)${1}\[${old_gateway}\]/\1${1}\[${gateway}\]/g")
+	wan_if_map=$(echo $wan_if_map | sed -e "s/${1}\[${old_ifname}\]/$1\[${ifname}\]/g")
+	wan_ip_map=$(echo $wan_ip_map | sed -e "s/${1}\[${old_ipaddr}\]/$1\[${ipaddr}\]/g")
+	wan_gw_map=$(echo $wan_gw_map | sed -e "s/${1}\[${old_gateway}\]/$1\[${gateway}\]/g")
 
 	if [ "$old_ifname" != "$ifname" ]; then
 	    iptables -D MultiWanPreHandler -t mangle -i $old_$ifname -m state --state NEW -j FW${get_wanid}MARK
@@ -206,14 +205,14 @@ update_cache() {
 
 query_config() {
     case $1 in
-	ifname)		echo $wan_if_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	ipaddr)		echo $wan_ip_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	gateway)	echo $wan_gw_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	wanid)		echo $wan_id_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	failchk)	echo $wan_fail_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	recvrychk)	echo $wan_recovery_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	monitor)	echo $wan_monitor_map	| grep -o -e "^$2\[\w*.*\]" -e "\]$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
-	group)		echo $wan_id_map	| grep -o "\w*\[$2\]" | awk -F "[" '{print $1}';;
+	ifname) echo $wan_if_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';; 
+	ipaddr) echo $wan_ip_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	gateway) echo $wan_gw_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	wanid) echo $wan_id_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	failchk) echo $wan_fail_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	recvrychk) echo $wan_recovery_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	monitor) echo $wan_monitor_map | grep -o "$2\[\w*.*\]" | awk -F "[" '{print $2}' | awk -F "]" '{print $1}';;
+	group) echo $wan_id_map | grep -o "\w*\[$2\]" | awk -F "[" '{print $1}';;
     esac
 }
 
@@ -436,34 +435,6 @@ mwanrule() {
     add_rule
 }
 
-
-get_dns_servers() {
-	local group=$1
-	local groups=$1
-	local dns=""
-	local dnss=""
-	local aliases=""
-	local g
-
-	aliases="$(uci show network| grep =\'@$group\')"
-
-	for g in $aliases ; do
-		g=${g#*.}; g=${g%%.*}
-		[ "$(uci -q get network.$g)" == "interface" ] || continue
-		groups="$groups $g"
-	done
-
-	groups="$(echo $groups | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-
-	for group in $groups ; do
-		network_get_dnsserver dns ${group}
-		dnss="$dnss $dns"
-	done
-
-	echo $dnss
-}
-
-
 refresh_dns() {
     local dns
     local group
@@ -474,8 +445,6 @@ refresh_dns() {
     local compile_dns
     local dns_server
 
-	network_flush_cache
-
     iptables -F MultiWanDNS -t mangle
 
     rm /tmp/resolv.conf.auto
@@ -492,8 +461,8 @@ refresh_dns() {
 	failchk=$(query_config failchk $group)
 
 	dns=$(uci_get_state multiwan ${group} dns 'auto')
-	[ "$dns" == "auto" ] && dns=$(get_dns_servers $group)
-	dns=$(echo $dns | sed -e "s/\,/ /g" | sed -e "s/ /\n/g")
+	[ "$dns" == "auto" ] && network_get_dnsserver dns ${group}
+	dns=$(echo $dns | sed -e "s/ /\n/g")
 
 	if [ ! -z "$dns" -a "$failchk" != "x" -a "$ipaddr" != "x" -a "$gateway" != "x" -a "$ifname" != "x" ]; then
 	    echo "$dns" | while read dns_server; do
@@ -853,7 +822,6 @@ monitor_wan() {
     while :; do
 	[ "${health_monitor%.*}" = 'parallel' ] && sleep $health_interval
 
-	network_flush_cache
 	network_get_device  ifname  ${1} || ifname=x
 	network_get_ipaddr  ipaddr  ${1} || ipaddr=x
 	network_get_gateway gateway ${1} || gateway=x
@@ -924,7 +892,7 @@ monitor_wan() {
 	fi
 
 	[ "$health_monitor" = 'serial' ] && {
-	    wan_monitor_map=$(echo $wan_monitor_map | sed -e "s/\(^\|.*\]\)${1}\[\w*\]/\1${1}\[$(date +%s)\]/g")
+	    wan_monitor_map=$(echo $wan_monitor_map | sed -e "s/$1\[\w*\]/$1\[$(date +%s)\]/g")
 	    update_cache
 	    break
 	}

natalie-dect/Makefile

@@ -42,29 +42,26 @@ define Package/natalie-dect
   DEPENDS:=bcmkernel
 endef
 
-define Package/natalie-dect/config
-	source "$(SOURCE)/Config.in"
-endef
-
 define Package/natalie-dect/description
 	Kernel dect driver
 endef
 
+define Package/natalie-dect/config
+	source "$(SOURCE)/Config.in"
+endef
+
 ifeq ($(CONFIG_NATALIE_OPEN),y)
 define Build/Compile
 endef
 endif
 
+define Package/natalie-dect/install
+	mkdir -p $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/
 ifeq ($(CONFIG_NATALIE_OPEN),y)
-define Package/natalie-dect/install
-	$(INSTALL_DIR) $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra
 	$(CP) $(PKG_BUILD_DIR)/dect.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
-endef
 else
-define Package/natalie-dect/install
-	$(INSTALL_DIR) $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra
 	$(CP) $(PKG_BUILD_DIR)/NatalieFpCvm6362/Src/Projects/NatalieV3/FpCvm/Linux6362/dects.ko $(1)/lib/modules/$(BCM_KERNEL_VERSION)/extra/dect.ko
-endef
 endif
+endef
 
 $(eval $(call BuildPackage,natalie-dect))

questd/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=3.1.28
+PKG_VERSION:=3.1.22
 
-PKG_SOURCE_VERSION:=74cd9925cf99f48e2241b4430b6bf3134790122a
+PKG_SOURCE_VERSION:=70ad526e6f44a98f03944f535add1712295dd3ec
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/questd
 
@@ -19,20 +19,20 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-QUESTD_CFLAGS:=-DIOPSYS_BROADCOM
+QUESTD_CLFAGS:=-DIOPSYS_BROADCOM
 KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-QUESTD_CFLAGS:=-DIOPSYS_BROADCOM
+QUESTD_CLFAGS:=-DIOPSYS_BROADCOM
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-QUESTD_CFLAGS:=-DIOPSYS_MARVELL
+QUESTD_CLFAGS:=-DIOPSYS_MARVELL
 else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
-QUESTD_CFLAGS:=-DIOPSYS_LANTIQ
+QUESTD_CLFAGS:=-DIOPSYS_LANTIQ
 else
 $(info (UNEXPECTED CONFIG TARGET))
 endif
 
 export KERNEL_DIR
-export QUESTD_CFLAGS
+export QUESTD_CLFAGS
 
 define Package/questd
 	CATEGORY:=Utilities

questd/files/etc/init.d/quest

@@ -11,8 +11,6 @@ start_service() {
 	procd_set_param command "/sbin/questd"
 	procd_set_param respawn
 	procd_close_instance
-
-	pidof questd-monitor > /dev/null 2>&1 || /sbin/questd-monitor &
 }
 
 stop() {

questd/files/sbin/questd-monitor

@@ -1,159 +0,0 @@
-#!/bin/sh
-
-# 1. sleep for $SLEEP_LONG seconds
-# 2. run the check_* functions
-# 3. sleep for $SLEEP_SHORT seconds
-# 4. go to step 2. $SAMPLES-1 times (step 2. will run $SAMPLES times)
-# 5. go to step 1.
-SAMPLES=4
-SLEEP_SHORT=2
-SLEEP_LONG=10
-
-# worst-case scenario:
-# quest will be restarted in:
-# SLEEP_LONG + (SAMPLES-1)*SLEEP_SHORT + UBUS_TIMEOUT + epsilon =
-# = 21 seconds
-
-# number of process
-NPROC_LIMIT=2	# the value that is considered to be wrong (and above)
-NPROC_COUNT=4	# number of time that the NPROC_LIMIT has to be hit to trigger a process restart
-NPROC_NFAIL=0	# current consecutive Number of FAILures. process restarts when NPROC_NFAIL == NPROC_COUNT
-
-# memmory limit
-MEM_LIMIT=50000
-MEM_COUNT=4
-MEM_NFAIL=0
-
-# procentage of CPU usage
-PCPU_LIMIT=38
-PCPU_COUNT=4
-PCPU_NFAIL=0
-
-UBUS_TIMEOUT=5
-
-
-restart_questd()
-{
-	logger -s -t $0[$$] "Restarting questd. $NPROC_NFAIL $MEM_NFAIL $PCPU_NFAIL"
-
-	/etc/init.d/quest stop
-	killall -q -KILL questd
-	/etc/init.d/quest start
-
-	NPROC_NFAIL=0
-	MEM_NFAIL=0
-	PCPU_NFAIL=0
-}
-
-
-check_nproc()
-{
-	local nproc="$@"
-
-	if [ "$nproc" -ge "$NPROC_LIMIT" ]; then
-		NPROC_NFAIL=$((NPROC_NFAIL + 1))
-	else
-		NPROC_NFAIL=0
-	fi
-
-	[ "$NPROC_NFAIL" -ge "$NPROC_COUNT" ] && return 1
-
-	return 0
-}
-
-check_mem()
-{
-	local mem="$@"
-	local ok=true
-
-	for m in $mem; do
-		if [ "$m" -ge "$MEM_LIMIT" ]; then
-			ok=false
-			break
-		fi
-	done
-
-	[ "$ok" = "true"  ] && MEM_NFAIL=0
-	[ "$ok" = "false" ] && MEM_NFAIL=$((MEM_NFAIL + 1))
-
-	[ "$MEM_NFAIL" -ge "$MEM_COUNT" ] && return 1
-
-	return 0
-}
-
-check_pcpu()
-{
-	local pcpu="$@"
-	local ok=true
-
-	for p in $pcpu; do
-		p=${p%%%*}
-		if [ "$p" -ge "$PCPU_LIMIT" ]; then
-			ok=false
-			break
-		fi
-	done
-
-	[ "$ok" = "true"  ] && PCPU_NFAIL=0
-	[ "$ok" = "false" ] && PCPU_NFAIL=$((PCPU_NFAIL + 1))
-
-	[ "$PCPU_NFAIL" -ge "$PCPU_COUNT" ] && return 1
-
-	return 0
-}
-
-check_ubuscall()
-{
-	local rv
-
-	ubus -t $UBUS_TIMEOUT call router.system info >/dev/null 2>&1
-	rv=$?
-
-	[ "$rv" = "0" ] && return 0
-	return 1
-}
-
-
-main()
-{
-	local topline nproc mem pcpu
-	local restart_nproc restart_mem restart_pcpu
-	local sample=1
-
-	while true ; do
-
-		# collect info
-		topline=$(top -bn1 | grep "/sbin/[q]uestd" | grep -v monitor)
-
-		nproc=$(echo "$topline" | wc -l)
-		check_nproc $nproc
-		restart_nproc=$?
-
-		mem=$(echo -en "$topline" | awk '{print $5}')
-		check_mem $mem
-		restart_mem=$?
-
-		pcpu=$(echo -en "$topline" | awk '{print $7}')
-		check_pcpu $pcpu
-		restart_pcpu=$?
-
-		# do the restart
-		if [ 	"$restart_nproc" = "1" -o \
-			"$restart_mem"   = "1" -o \
-			"$restart_pcpu"  = "1" ]
-		then
-			check_ubuscall || restart_questd
-		fi
-
-		# sleep
-		if [ "$sample" -lt "$SAMPLES" ]; then
-			sample=$((sample + 1))
-			sleep $SLEEP_SHORT
-		else
-			sample=1
-			sleep $SLEEP_LONG
-		fi
-	done
-}
-
-main $@

samba2/Makefile

@@ -155,6 +155,7 @@ define Build/Compile
 			--with-privatedir=/etc/samba2 \
 			--with-readline=no \
 			--with-syslog \
+			--disable-cups \
 	);
 	$(MAKE) -C $(PKG_BUILD_DIR)/source \
 		$(TARGET_CONFIGURE_OPTS) \

samba3/Makefile

@@ -83,6 +83,7 @@ CONFIGURE_ARGS+= \
 	--without-ads \
 	--without-ldap \
 	--enable-largefile \
+	--disable-cups \
 	--with-configdir=/etc/samba \
 	--with-libiconv=$(ICONV_PREFIX) \
 	--with-privatedir=/etc/samba

voice-client/files/etc/asterisk/special_rate_nr.cfg

@@ -1,25 +1,25 @@
-AUS;19x+
-BEL;09xx+
-BRA;05xx+
+AUS;19x
+BEL;09xx
+BRA;05xx
 CHL;
 CHN;
-CZE;9xx+
-DNK;90xx+
+CZE;9xx
+DNK;90xx
 ETS;
-FIN;0(7[0,5]|[1-3,6]0)x+
-FRA;0[8,9]xx+
-DEU;0(9xx|137)x+
-HUN;06-[8,9]x+
+FIN;0(7[0,5]|[1-3,6]0)
+FRA;0[8,9]xx
+DEU;0(9xx|137)
+HUN;06-[8,9]x
 IND;
 ITA;8
-JPN;0990x+
-NLD;09xx+
-NZL;0900x+
-USA;1-900x+
-ESP;([8,9]0x|118)x+
-SWE;90510,09(00|39|44)x+,099x+
-CHE;09xx+
-NOR;82x+
-TWN;020[3,4,9]x+
-GBR;0[8,9]xx+
-ARE;[2,6]00x+
+JPN;0990
+NLD;09xx
+NZL;0900
+USA;1-900
+ESP;([8,9]0x|118)
+SWE;09xx
+CHE;09xx
+NOR;82x
+TWN;020[3,4,9]
+GBR;0[8,9]xx
+ARE;[2,6]00

voice-client/files/etc/asterisk_templates/cdr_syslog.conf.TEMPLATE

@@ -1,5 +0,0 @@
-[syslog]
-
-facility = local0
-priority = cdr
-template = "callId:${CDR(clid)}, src:${CDR(src)}, dst:${CDR(dst)}, dstContext:${CDR(dcontext)}, chan:${CDR(channel)}, dstChan:${CDR(dstchannel)},$ app:${CDR(lastapp)}, arg:${CDR(lastdata)}, start:${CDR(start)}, answ:${CDR(answer)}, end:${CDR(end)}, duration:${CDR(duration)}, billsec:${CDR(billsec)}, dispos:${CDR(disposition)}, amaflag:${CDR(amaflags)}, accCode:${CDR(accountcode)}, uniqId:${CDR(uniqueid)}, userfield:${CDR(userfield)}"

voice-client/files/etc/config/voice_client

@@ -167,6 +167,3 @@ config 'sip_service_provider' 'sip0'
 	option 'is_fax' '0'
 	option 'transport' 'udp'
 
-config cdr_log 'CDR_LOG'
-        option cdr_syslog '0'
-

voice-client/files/etc/init.d/voice_client

@@ -66,7 +66,6 @@ TMPL_QUEUE=$TEMPLATEDIR/queue.TEMPLATE
 
 TMPL_ASTERISK=$TEMPLATEDIR/asterisk.conf.TEMPLATE
 TMPL_CDR=$TEMPLATEDIR/cdr.conf.TEMPLATE
-TMPL_CDR_SYSLOG=$TEMPLATEDIR/cdr_syslog.conf.TEMPLATE
 TMPL_INDICATIONS=$TEMPLATEDIR/indications.conf.TEMPLATE
 TMPL_LOGGER=$TEMPLATEDIR/logger.conf.TEMPLATE
 TMPL_MANAGER=$TEMPLATEDIR/manager.conf.TEMPLATE
@@ -143,7 +142,6 @@ assemble_and_copy_config()
 	# Copy the template files which we don't edit.
 	cp $TMPL_ASTERISK		$WORKDIR/asterisk.conf
 	cp $TMPL_CDR			$WORKDIR/cdr.conf
-	cp $TMPL_CEL			$WORKDIR/cel.conf
 	cp $TMPL_INDICATIONS		$WORKDIR/indications.conf
 	cp $TMPL_MANAGER		$WORKDIR/manager.conf
 	cp $TMPL_MODULES		$WORKDIR/modules.conf
@@ -845,7 +843,6 @@ encrypt_password()
 		if [ -e /usr/bin/voicesec ] ; then
 			echo "Encrypting password for $1"
 			/usr/bin/voicesec -e $secret > /usr/lib/asterisk/voicesec_$1
-			fsync /usr/lib/asterisk/voicesec_$1
 		fi
 		uci_remove voice_client $1 secret
 		uci_commit voice_client
@@ -1119,21 +1116,6 @@ configure_cdr()
 {
 	mkdir -p /var/log/asterisk/cdr-csv
 	touch /var/log/asterisk/cdr-csv/Master.csv
-
-
-	local cdr_syslog
-	config_get cdr_syslog CDR_LOG cdr_syslog
-
-	echo "cdr_syslog: $cdr_syslog"
-
-        if [ -z "$cdr_syslog" ] ; then
-	    cdr_syslog='0'
-	fi
-
-	# Enable/disable CDR logging in syslog
-	if [ "$cdr_syslog" == "1" ] ; then
-            cp $TMPL_CDR_SYSLOG		        $WORKDIR/cdr_syslog.conf
-	fi
 }
 
 #
@@ -1218,7 +1200,7 @@ configure_call_filters()
 	# All x characters are replaced with [0-9] to match a single digit
 	srn="($(echo $srn | tr -s "" | tr "," "|" | sed 's/x/[0-9]/g'))"
 
-	echo "exten => s,n,GotoIf($[\"\${ARG1}\":\"(^$srn$)\">0]?special-rate:normal-rate)" >> $WORKDIR/macros.tmp
+	echo "exten => s,n,GotoIf($[\"\${ARG1}\":\"(^$srn[0-9]+)\">0]?special-rate:normal-rate)" >> $WORKDIR/macros.tmp
 	echo "exten => s,n(special-rate),Set(SPECRATE=1)" >>	$WORKDIR/macros.tmp
 	echo "exten => s,n,MacroExit()" >>			$WORKDIR/macros.tmp
 	echo "exten => s,n(normal-rate),Set(SPECRATE=0)" >>	$WORKDIR/macros.tmp