fix build errors

- use pre-compiled version of natalie dect
- disable 'cups' for samba packages

4g-support/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,74 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	interface=$(cat $usb_dir/interface)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+#devno=$(basename $DEVPATH)
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
+		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,771 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=015d279241d0ac5d8c1321aa6f78b9ae551575d1
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod +libsqlite3
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+# I've had strange errors with -fno-caller-saves
+# in global CFLAGS so revert it. /Ronny
+EXTRA_CFLAGS+= -O2 -fcaller-saves
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="" \
+		OPTIMIZE="" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,70 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions/network.sh
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+
+init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	config_load voice_client
+	local bindintf
+	config_get bindintf SIP bindintf ""
+	if [ "$bindintf" == ""  ]; then
+		while ! ip r | grep -q default; do
+			sleep 1
+		done
+	else
+		network_get_ipaddr ip "$bindintf"
+		while [ "$ip" == "" ]; do
+			sleep 1
+			network_get_ipaddr ip "$bindintf"
+		done
+	fi
+
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

ated/Makefile

@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -1,62 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))

dectmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.23
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -11,7 +11,7 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ace6a3dcb6aa463cf5a34ad39ac37a5bc7d4ce5e
+PKG_SOURCE_VERSION:=3191d38385c8e46c3888859f196e41c7db4447bc
 PKG_NAME:=dectmngr2
 
 

endptcfg/Makefile

@@ -0,0 +1,92 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+TARGET_CFLAGS += -DFAKE_SSP
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+define Package/endptcfg/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifneq ($(CONFIG_ENDPT_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

endptmngr/Makefile

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.1
-PKG_SOURCE_VERSION:=fa9ba5d7c942571ae6e44eb7bb5dae2c9b9e8ca4
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@private.inteno.se:endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_NAME:=endptmngr
-endif
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
-endef
-
-endif
-
-
-define Package/endptmngr/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))

endptmngr/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

fatrace/Makefile

@@ -1,58 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=fatrace
-PKG_VERSION:=0.12
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fatrace
-	CATEGORY:=Utilities
-	TITLE:=Report system wide file access events
-	URL:=
-	DEPENDS	:= +@KERNEL_FANOTIFY
-endef
-
-define Package/fatrace/description
-	Report system wide file access events.
-endef
-
-MAKE_INSTALL_FLAGS += PREFIX="/" 
-
-define Package/fatrace/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
-#	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,fatrace))
-
-

fatrace/patches/001-fix-O_LARGEFILE.patch

@@ -1,14 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index 1c0899a..b7d1560 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -44,7 +44,8 @@
-  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
-  * O_LARGEFILE is usually 0, so hardcode it here
-  */
--#define KERNEL_O_LARGEFILE 00100000
-+//#define KERNEL_O_LARGEFILE 00100000
-+#define KERNEL_O_LARGEFILE O_LARGEFILE
- 
- /* command line options */
- static char* option_output = NULL;

fatrace/patches/002-fflush.patch

@@ -1,12 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index b7d1560..6179272 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
-         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
-     }
-     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
-+    fflush(stdout);
- }
- 
- /**

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

ice-client/Makefile

@@ -19,21 +19,20 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.0.3
-PKG_RELEASE:=RC5
+BASE_PKG_VERSION:=4.0.1
+PKG_RELEASE:=RC17
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=a7f40bfd47d0ce3f3c002460e3c83ffc821ac1e4
+PKG_SOURCE_VERSION:=97a3da5fae8b5374a598c78346cb11477c85e293
 ifeq ($(CONFIG_ICE_OPEN),y)
-TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-SKIPHASH=1
-export SKIPHASH
 else
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
@@ -60,6 +59,7 @@ $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
 	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
+#	DEPENDS:=+libopenssl +uclibcxx +libubus +ubus +ubusd +jshn +libubox +libpthread
 endef
 
 define Package/ice-client/config
@@ -79,7 +79,7 @@ endef
 # PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 # 
 #
-# These settings allow you to specify a source folder where your source code is located
+# These settings allow you to specify a soruce folder where your source code is located
 # This avoids having to tar-zip or fetch from git each time
 # Changes can be done in your sources while the build is performed somewhere else
 # If you forget some settings, your source folder will be deleted!!! So be carefull and 
@@ -132,12 +132,12 @@ endef
 
 ifeq ($(CONFIG_ICE_OPEN),y)
 define Package/ice-client/install
-	#$(INSTALL_DIR) $(1)/bin
-	#$(INSTALL_DIR) $(1)/etc
-	#$(INSTALL_DIR) $(1)/usr
-	#$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
-	#$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
-	#$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
 endef
 else
 define Package/ice-client/install
@@ -155,7 +155,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates

ice-client/files/ice-client.uci_default

@@ -1,15 +1,13 @@
 #!/bin/sh
 
 grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
+	local password="$(db get hw.board.wpaKey)"
+	if [ -n "$password" ]; then
+		adduser -D -H -s /bin/false ice
+		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
+	fi
 }
 
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
 uci show rpcd | grep username=.*ice.* >/dev/null || {
 cat >> /etc/config/rpcd << EOF
 
@@ -24,8 +22,8 @@ config login
 	list write 'juci-broadcom-iptv'
 	list write 'juci-broadcom-vlan'
 	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
+	list write 'juci-broadcom-wl'
+	list write 'juci-broadcom-wl-admin'
 	list write 'juci-catv'
 	list write 'juci-ddns'
 	list write 'juci-diagnostics'
@@ -49,7 +47,6 @@ config login
 	list write 'juci-network-netifd'
 	list write 'juci-owsd'
 	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
 	list write 'juci-samba'
 	list write 'juci-sfp'
 	list write 'juci-snmpd'
@@ -59,7 +56,6 @@ config login
 	list write 'juci-usb'
 	list write 'core'
 	list write 'unauthenticated'
-
 EOF
 }
 

icwmp/Config.in

@@ -15,17 +15,33 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice
 
+choice
+	prompt "Select Data Model"
+	default tr098
+
+config DATAMODEL_TR098
+	bool "TR-098"
+
+config DATAMODEL_TR181
+	bool "TR-181"
+endchoice
+
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
-config XMPP_ENABLE
-	bool "enable xmpp feature"
-	default n
+choice
+	prompt "enable xmpp feature"
+	default disable
 
+config XMPP_DISABLE
+	bool "disable"
+
+config XMPP_ENABLE
+	bool "enable"
+endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
 
 endif
-

icwmp/Config_datamodel.in

@@ -1,7 +0,0 @@
-if PACKAGE_libdatamodel
-
-config UPNP_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2018-04-09
+PKG_VERSION:=3.0-2016-10-20
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cfbec44903f66dc53e2d560d1a4cde42dca923f4
+PKG_SOURCE_VERSION:=fdaa1daa184205fe256bb155b7fb0f29a034baaa
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -30,19 +30,11 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/libdatamodel
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-endef
-
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl
 endef
 
 define Package/icwmp/description
@@ -64,11 +56,7 @@ define Package/icwmp-zstream
 endef
 
 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
-endef
-
-define Package/libdatamodel/config
-	source "$(SOURCE)/Config_datamodel.in"
+	source "$(SOURCE)/Config.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -78,10 +66,6 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_CFLAGS += -DEX400
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
 
@@ -101,17 +85,10 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
-ifeq ($(CONFIG_UPNP_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-upnptr064
-endif
-	
-ifeq ($(CONFIG_XMPP_ENABLE),y)
-CONFIGURE_ARGS += \
-	--enable-xmpp
-endif
-	
+
+CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
+CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -143,18 +120,13 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-define Package/libdatamodel/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
-endef
-
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
@@ -166,21 +138,10 @@ ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
-	$(CP) ./files/* $(1)/
 endef
 
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
-endef
-
-
 define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
 	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
@@ -202,5 +163,4 @@ endef
 
 
 $(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,libdatamodel))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,57 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_reload() {
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	[ "$previpaddr" = "$curipaddr" -a "$prevgateway" = "$curgateway" -a "$prevsubnets" = "$cursubnets" -a "$prevdnsservers" = "$curdnsservers" ] && exit 0
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_reload
-

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-set_cwmp_reqopts

imonitor/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2018 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_SOURCE_PROTO=git
-PKG_SOURCE_URL:=http://public.inteno.se/imonitor.git
-PKG_SOURCE_VERSION:=defec6849fb987619fc7fd9295895f4f0b9db5a9
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/imonitor
-	CATEGORY:=Utilities
-	TITLE:=Inteno process supervisor
-	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
-endef
-
-define Package/imonitor/description
-	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
-endef
-
-define Package/imonitor/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-endef
-
-$(eval $(call BuildPackage,imonitor))

imonitor/files/etc/config/imonitor

@@ -1,8 +0,0 @@
-config monitor
-   option app 'test'
-   option test 'echo test'
-   option stream 'stdout'
-   option string_match 'test'
-   option execute 'echo executing'
-   option interval '10'
-   option nr_tests '2'

imonitor/files/etc/init.d/imonitor

@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the imonitor
-#
-
-START=99
-STOP=01
-
-USE_PROCD=1
-NAME=imonitor
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "imonitor"
-	procd_set_param stdout 1
-        procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop() {
-	service_stop imonitor
-}
-
-reload_service() {
-	stop
-	start
-}
-

inbd/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f81c146f0b07540877545e5ab644ec8e29905a4d
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))

inteno-netmodes/Makefile

@@ -5,32 +5,30 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=inteno-netmodes
-PKG_VERSION:=0.2.0
-
-PKG_SOURCE_VERSION:=b898924491c378ca09ab124991b27f54a336e4e9
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/netmoded
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
 include $(INCLUDE_DIR)/package.mk
 
 define Package/inteno-netmodes
-	CATEGORY:=Base system
-	DEPENDS:=+fping +ubus +libubox +libuci
-	TITLE:=Predefined Network Modes
+  CATEGORY:=Base system
+  TITLE:=Predefined Network Modes
 endef
 
 define Package/inteno-netmodes/description
 	Predefined Network Modes
 endef
 
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
 define Package/inteno-netmodes/install
 	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/netmoded $(1)/sbin/
 endef
 
 $(eval $(call BuildPackage,inteno-netmodes))

inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-handler

@@ -1,45 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-. /lib/functions/netmode.sh
-
-network_flush_cache
-network_get_ipaddr ipaddr $INTERFACE
-[ -z "$ipaddr" ] && exit
-
-repeaterready="$(uci -q get netmode.setup.repeaterready)"
-curmode="$(uci -q get netmode.setup.curmode)"
-
-if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
-	if [ "$repeaterready" == "1" -o "${curmode:0:8}" == "repeater" ]; then
-		# flush the ip on br-lan; br-lan will anyhow be deleted.
-		# this is needed if the ip received on the wan is also from the same net
-		ip addr flush dev br-lan 2>/dev/null
-
-		# flush iptables in case the MASTER
-		# tries to configure us before
-		# firewall is disabled the proper way
-		iptables -F
-
-		disable_firewall 1
-	fi
-else
-	disable_firewall 0
-fi
-
-case "$curmode" in
-		repeater*)
-		;;
-		*)
-			[ "$repeaterready" == "1" ] || return
-			if [ "$(netmode_get_ip_type $ipaddr)" == "private" ]; then
-				wificontrol_takes_over || switch_netmode repeater
-			else
-				switch_netmode routed
-			fi
-		;;
-esac
-

inteno-netmodes/files/etc/hotplug.d/iface/05-testnet

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" == "ifup" -o "$ACTION" == "ifdown" ] || exit 0
-
-interface_check() {
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local defroute="$(uci -q get network.$INTERFACE.defaultroute)"
-	[ "$defroute" == "0" ] && exit 0
-}
-
-interface_check
-if [ -n "$(pidof testnet)" ]; then
-	testnet once
-else
-	testnet &
-fi
-

inteno-netmodes/files/etc/hotplug.d/iface/70-shiftrange

@@ -1,249 +0,0 @@
-#!/bin/sh
-# this scripts shifts the lan network prefixes
-# if a wan interface has the same network prefix.
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-
-LOCKFILE="/tmp/70-shiftrange.lock"
-RESTRICTED_NETS=""
-ALL_NETS=""
-
-#####
-##### initial functions
-#####
-
-initial_check()
-{
-	# run only on ifup
-	[ "$ACTION" == "ifup" ] || exit 0
-
-	# run only for uplink (not is_lan) interfaces
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" != "1" ] || exit 0
-
-	# run only if the uplink interface has a configured protocol
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" != "none" ] || exit 0
-}
-
-finish()
-{
-    lock -u $LOCKFILE
-    rm -f $LOCKFILE
-}
-
-# just one instance of this script at a time
-just_one_instance()
-{
-	local counter=0
-	local limit=10
-
-	#wait for the lock to become free
-	while [ -e $LOCKFILE ] ; do
-		sleep 1
-		counter=$((counter + 1))
-		[ "$counter" -gt "$limit" ] && exit 1
-	done
-
-	lock $LOCKFILE
-	trap finish EXIT INT TERM
-}
-
-
-#####
-##### helper functions
-#####
-
-#given a an ip and a mask in the form of "192.168.1.1/24"
-#return the network address like "192.168.1.0/24"
-get_network_address()
-{
-	local ip="$1"
-	[ -z "$ip" ] && return
-
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local mask=$((0xFFFFFFFF >> (32 - $prefix) << (32 - $prefix)))
-	local network=$(($ip & $mask))
-
-	local n1=$((($network & 0xFF000000) >> 24))
-	local n2=$((($network & 0x00FF0000) >> 16))
-	local n3=$((($network & 0x0000FF00) >> 8))
-	local n4=$(( $network & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-#given a network address (192.168.1.0/24)
-#find the next network address (192.168.2.0/24)
-next_network_address()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local one="$((1 << (32-$prefix)))"
-	local new=$(($ip + $one))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4/$prefix"
-}
-
-# given a network address and a prefix (192.168.2.0/24)
-# return the first host ip available   (192.168.2.1)
-first_host_in_network ()
-{
-	local ip=$1
-	local prefix=${ip##*/}
-
-	local ip1=${ip%%.*} ; ip=${ip#*.*}
-	local ip2=${ip%%.*} ; ip=${ip#*.*}
-	local ip3=${ip%%.*} ; ip=${ip#*.*}
-	local ip4=${ip%%/*}
-
-	local ip=$((($ip1 << 24) + ($ip2 << 16) + ($ip3 << 8) + $ip4))
-	local new=$(($ip + 1))
-
-	local n1=$((($new & 0xFF000000) >> 24))
-	local n2=$((($new & 0x00FF0000) >> 16))
-	local n3=$((($new & 0x0000FF00) >> 8))
-	local n4=$(( $new & 0x000000FF))
-
-	echo "$n1.$n2.$n3.$n4"
-}
-
-# given a network address,
-# find the next available network address.
-shift_range()
-{
-	local net="$1"
-	while true ; do
-		if [ "$RESTRICTED_NETS" == "${RESTRICTED_NETS//$net/}" ] && [ "$ALL_NETS" == "${ALL_NETS//$net/}" ]; then
-			# found a net that is not in restricted nets nor in all nets
-			break
-		fi
-		net=$(next_network_address $net)
-	done
-
-	echo "$net"
-}
-
-
-#####
-##### parse all interfaces section
-#####
-
-# RESTRICTED_NETS = all the IPs on wan interfaces
-# ALL_NETS = all the IPs on any interface
-parse_interface()
-{
-	local interface=$1
-	local nets=""		# "192.168.1.1/24"
-	local networks=""	# "192.168.1.0/24"
-
-	config_get is_lan $interface is_lan
-	network_get_subnets nets $interface
-
-	for n in $nets ; do
-		networks="$networks $(get_network_address $n)"
-	done
-
-	[ "$is_lan" != "1" ] && RESTRICTED_NETS="$RESTRICTED_NETS $networks"
-	ALL_NETS="$ALL_NETS $networks"
-}
-
-# parse all the interfaces
-# get all the IPs on wan interfaces and store them in restrict_nets
-# get all the IPs on all interfaces and store them in ALL_NETS
-parse_interfaces()
-{
-	config_foreach parse_interface "interface"
-}
-
-
-#####
-##### parse all lan interfaces section
-#####
-
-parse_lan()
-{
-	local interface=$1
-	local nets=""
-	local ips=""
-	local newips=""
-	local ips_changed=0
-
-	[ "$interface" == "loopback" ] && return
-	config_get is_lan $interface is_lan
-	[ "$is_lan" == "1" ] || return
-
-	network_get_subnets ips $interface
-
-	for ip in $ips ; do
-		net="$(get_network_address $ip)"
-
-		if [ "$RESTRICTED_NETS" == "${RESTRICTED_NETS//$net/}" ] ; then
-			# net is not in restricted nets
-			# append ip to newips
-			[ -z "$newips" ] && newips="${ip%/*}" ||  newips="$newips ${ip%/*}"
-			continue
-		fi
-
-		#net is in RESTRICTED_NETS
-		local newnet=$(shift_range $net)
-		local newip="$(first_host_in_network $newnet)"
-		# append newip to newips
-		[ -z "$newips" ] && newips="$newip" ||  newips="$newips $newip"
-
-		ips_changed=1
-		logger "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}"
-		echo "$0: Changing the ip on interface $interface from $ip to $newip/${newnet##*/}" >/dev/console
-	done
-
-	#assign the new ips
-	if [ "$ips_changed" == "1" ] ; then
-		uci -q set network.$interface.ipaddr="$newips"
-	fi
-}
-
-# parse all the interface with is_lan=1
-parse_lans()
-{
-	config_foreach parse_lan "interface"
-}
-
-#####
-##### main
-#####
-
-main()
-{
-	initial_check
-	just_one_instance
-
-	config_load network
-	parse_interfaces
-	parse_lans
-
-	if [ -n "$(uci changes network)" ] ; then
-		ubus call uci commit '{"config":"network"}'
-	fi
-}
-
-main $@

inteno-netmodes/files/etc/hotplug.d/net/80-repeater

@@ -1,24 +1,71 @@
 #!/bin/sh
 
 . /lib/functions.sh
-. /lib/functions/netmode.sh
+include /lib/network
 
-ps | grep hotplug | grep button && exit
-
-[ -z "$INTERFACE" ] && exit
-
-defroute=$(ip route | grep default | awk '{print$3}')
+[ "$INTERFACE" != "$(uci get layer2_interface_ethernet.Wan.ifname)" ] && exit
+[ "$(uci get netmode.setup.curmode)" != "repeater" ] && exit
 
 case "$(uci get netmode.setup.curmode)" in
-		repeater*)
-		;;
-		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-			exit
-		;;
+		repeater|repeater_dualdown) echo "Preparing to switch mode" ;;
+		*) exit ;;
 esac
 
+get_wifi_wet_interface() {
+#	handle_interface() {
+#		config_get mode "$1" mode
+#		if [ "$mode" == "wet" ] ; then
+#			config_get ifname "$1" ifname
+#			echo "$ifname"
+#		fi
+#	}
+#	config_load wireless
+#	config_foreach handle_interface wifi-iface "$device"
+	echo "wl1"
+}
+
+get_wifi_iface_cfgstr() {
+	get_cfgno() {
+		config_get ifname "$1" ifname
+		[ "$ifname" == "$2" ] && echo "wireless.$1"
+	}
+	config_load wireless
+	config_foreach get_cfgno wifi-iface $1 $2
+}
+
 case "$ACTION" in
-	add|register|remove|unregister) correct_uplink $INTERFACE;;
+	add|register)
+		echo "Autoswitch to Extender mode" > /dev/console
+		sleep 2
+		# remove wifi client interface
+		case "$(uci get netmode.setup.curmode)" in
+			repeater_dualdown)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=1
+			;;
+			repeater)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=ap
+			;;
+		esac
+		uci commit wireless
+		#add wan ethernet port
+		uci set network.wan.ifname="$(echo $(uci get layer2_interface_ethernet.Wan.ifname) $(uci get network.wan.ifname) | tr ' ' '\n' | sort -u | tr '\n' ' ')"
+		ubus call uci commit '{"config":"network"}'
+	;;
+	remove|unregister)
+		echo "Autoswitch to Repeater mode" > /dev/console
+		sleep 2
+		# add wifi client interface
+		case "$(uci get netmode.setup.curmode)" in
+			repeater_dualdown)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).disabled=0
+			;;
+			repeater)
+				uci -q set $(get_wifi_iface_cfgstr $(get_wifi_wet_interface)).mode=wet
+			;;
+		esac
+		uci commit wireless
+		#remove wan ethernet port
+		uci set network.wan.ifname="$(uci get network.wan.ifname | sed 's/$/ /' | sed -r "s/`uci get layer2_interface_ethernet.Wan.ifname` //g")"
+		ubus call uci commit '{"config":"network"}'
+	;;
 esac
-

inteno-netmodes/files/etc/init.d/netmode

@@ -3,39 +3,163 @@
 START=10
 USE_PROCD=1
 
-NETMODED="/sbin/netmoded"
+. /usr/share/libubox/jshn.sh
+. /lib/network/config.sh
 
-. /lib/functions.sh
-. /lib/functions/netmode.sh
+local modedir=$(uci -q get netmode.setup.dir)
+[ -n "$modedir" ] || modedir="/etc/netmodes"
 
-start_netmoded() {
-	procd_open_instance
-	procd_set_param command $NETMODED
+get_device() {
+	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
+	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
+        local cnt=1
+        local idx=0
 
-	procd_append_param command --verbose debug
-	procd_set_param stdout 1
-	procd_set_param stderr 1
+	local pnum=$(echo $PORT_NAMES | wc -w)
 
-	procd_set_param respawn
-	procd_close_instance
+	if [ $pnum -le 2 ]; then
+		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
+	fi
+
+	# get index of interface name
+	for i in $PORT_NAMES; do
+		if [ "$i" == "$1" ]; then
+			idx=$cnt
+		fi
+		cnt=$((cnt+1))
+	done
+
+        # get port name from index
+	cnt=1
+	for i in $PORT_ORDER; do
+		if [ "$cnt" == "$idx" ]; then
+			echo $i
+		fi
+		cnt=$((cnt+1))
+	done
+}
+
+populate_netmodes() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	delete_netmode() {
+		uci delete netmode.$1
+	}
+
+	config_load netmode
+
+	config_foreach delete_netmode netmode
+	uci commit netmode
+
+	wan=$(get_device WAN)
+	lan1=$(get_device LAN1)
+	lan2=$(get_device LAN2)
+	lan3=$(get_device LAN3)
+	lan4=$(get_device LAN4)
+	lan5=$(get_device LAN5)
+
+	for file in $(find $modedir -type f); do
+		grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
+		grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
+		grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
+		grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
+		grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
+	done
+
+	local hardware=$(db get hw.board.hardware)
+	local keys lang desc exp exclude
+	for mode in $(ls $modedir); do
+			lang=""
+			desc=""
+			exp=""
+			uci -q set netmode.$mode=netmode
+			uci -q set netmode.$mode.conf=$mode
+			json_load "$(cat $modedir/$mode/DETAILS)"
+
+			if json_select excluded_boards; then
+				exclude=0
+				_i=1
+				while json_get_var board $_i; do
+					case "$hardware" in
+						$board)
+							uci -q delete netmode.$mode
+							exclude=1
+							break
+						;;
+					esac
+					_i=$((_i+1))
+				done
+				json_select ..
+				[ $exclude -eq 1 ] && continue
+			fi
+
+			if json_select acl; then
+				_i=1
+				while json_get_var user $_i; do
+					uci add_list netmode.$mode._access_r="$user"
+					_i=$((_i+1))
+				done
+				json_select ..
+			fi
+
+			json_select description
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var desc $lang
+				uci -q set netmode.$mode."desc_$lang"="$desc"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
+				json_select ..
+			done
+			json_select ..
+
+			json_select explanation
+			json_get_keys keys
+			for k in $keys; do
+				json_get_keys lang $k
+				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
+				json_select $k
+				json_get_var exp $lang
+				uci -q set netmode.$mode."exp_$lang"="$exp"
+				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
+				json_select ..
+			done
+			json_select ..
+
+			json_get_var cred credentials
+			uci -q set netmode.$mode.askcred="$cred"
+			json_get_var reboot reboot
+			uci -q set netmode.$mode.reboot="$reboot"
+	done
+	uci commit netmode
+}
+
+switch_netmode() {
+	[ -f /etc/config/netmode -a -d $modedir ] || return
+
+	config_load netmode
+
+	config_get curmode setup curmode
+	config_get conf $curmode conf
+	cp /etc/netmodes/$conf/* /etc/config/
+	rm -f /etc/config/DETAILS
+	sync
+	local reboot=$(uci -q get netmode.$curmode.reboot)
+	if [ "$reboot" == "0" ]; then
+		/etc/init.d/enviroment reload
+	else
+		reboot &
+	fi
 }
 
 start_service() {
 	populate_netmodes
-
-	start_netmoded
-	start_netmode_tools
 }
 
 reload_service() {
         switch_netmode
-
-	start_netmoded
-	start_netmode_tools
-}
-
-stop_service() {
-	stop_netmode_tools
 }
 
 service_triggers()

inteno-netmodes/files/etc/netmodes/bridged/DETAILS

@@ -10,9 +10,7 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301",
-		"EX400",
-		"SDX810-AP"
+		"CG301"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/bridged/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_adsl

@@ -0,0 +1,23 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/bridged/layer2_interface_vlan

@@ -0,0 +1,18 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/bridged/network

@@ -28,39 +28,10 @@ config interface 'iptv'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
 	option defaultroute '0'
 
 config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-
-config device 'ethtv'
-	option type '8021q'
-	option name '$WAN.100'
-	option ifname '$WAN'
-	option vid '100'
-	option priority '0'
-
-config device 'ptmtv'
-	option type '8021q'
-	option name 'ptm0.100'
-	option ifname 'ptm0'
-	option vid '100'
-	option priority '0'
-

inteno-netmodes/files/etc/netmodes/bridged/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -51,7 +44,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +83,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS

@@ -10,10 +10,7 @@
 	"credentials" : 0,
 	"excluded_boards" : [
 		"CG300",
-		"CG301",
-		"EX400",
-		"F*",
-		"SDX810-AP"
+		"CG301"
 	],
 	"acl" : [
 		"admin",

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_adsl

@@ -0,0 +1,34 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm1.1'
+        option baseifname 'atm1'
+        option atmtype 'ubr'
+        option name 'atm_tv'
+        option vpi '8'
+        option vci '45'
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '1'
+        option ifname 'atm2.1'
+        option baseifname 'atm2'
+        option atmtype 'ubr'
+        option name 'atm_voip'
+        option vpi '8'
+        option vci '55'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/layer2_interface_vlan

@@ -0,0 +1,32 @@
+
+
+config 'vlan_interface'
+	option name 'eth_tv'
+	option ifname '$WAN.100'
+	option baseifname '$WAN'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'eth_voip'
+	option ifname '$WAN.200'
+	option baseifname '$WAN'
+	option vlan8021q '200'
+	option vlan8021p '0'
+
+config 'vlan_interface'
+	option name 'vdsl_tv'
+	option ifname 'ptm0.100'
+	option baseifname 'ptm0'
+	option vlan8021q '100'
+	option vlan8021p '0'
+	option bridge '1'
+
+config 'vlan_interface'
+	option name 'vdsl_voip'
+	option ifname 'ptm0.200'
+	option baseifname 'ptm0'
+	option vlan8021q '200'
+	option vlan8021p '0'
+

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network

@@ -28,7 +28,7 @@ config interface 'iptv'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 $WAN.100 $LAN4'
+	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
 	option defaultroute '0'
 
 config interface 'voip'
@@ -36,53 +36,10 @@ config interface 'voip'
 	option proto 'dhcp'
 	option gateway '0.0.0.0'
 	option reqopts 'staticroutes'
-	option ifname 'ptm0.200 $WAN.200'
+	option ifname 'ptm0.200 atm2.1 $WAN.200'
 	option defaultroute '0'
 
 config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-
-config device 'ethtv'
-	option type '8021q'
-	option name '$WAN.100'
-	option ifname '$WAN'
-	option vid '100'
-	option priority '0'
-
-config device 'ptmtv'
-	option type '8021q'
-	option name 'ptm0.100'
-	option ifname 'ptm0'
-	option vid '100'
-	option priority '0'
-
-config device 'ethvoip'
-	option type '8021q'
-	option name '$WAN.200'
-	option ifname '$WAN'
-	option vid '200'
-	option priority '0'
-
-config device 'ptmvoip'
-	option type '8021q'
-	option name 'ptm0.200'
-	option ifname 'ptm0'
-	option vid '200'
-	option priority '0'
-

inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -51,7 +44,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +83,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/repeater/DETAILS

@@ -8,10 +8,11 @@
 		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
 	],
 	"excluded_boards" : [
-		"*G*",
-		"F*"
+		"DG*",
+		"EG*",
+		"VG*"
 	],
-	"uplink_band" : 'b',
 	"credentials" : 1,
 	"reboot" : 0
 }
+

inteno-netmodes/files/etc/netmodes/repeater/firewall

@@ -1,6 +1,3 @@
-config settings 'settings'
-        option disabled '0'
-
 config defaults
 	option syn_flood	1
 	option input		ACCEPT
@@ -19,7 +16,6 @@ config zone
 config zone
 	option name		wan
 	list   network		'wan'
-	list   network		'wan6'
 	option input		REJECT
 	option output		ACCEPT
 	option forward		REJECT
@@ -39,6 +35,16 @@ config rule
 	option dest_port	68
 	option target		ACCEPT
 	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
 
 # Allow IPv4 ping
 config rule
@@ -48,13 +54,7 @@ config rule
 	option icmp_type	echo-request
 	option family		ipv4
 	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
+	option hidden		1
 
 # Allow DHCPv6 replies
 # see https://dev.openwrt.org/ticket/10381
@@ -68,24 +68,13 @@ config rule
 	option dest_port	546
 	option family		ipv6
 	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
+	option hidden		1
 
 # Allow essential incoming IPv6 ICMP traffic
 config rule
 	option name		Allow-ICMPv6-Input
 	option src		wan
-	option proto	icmp
+	option proto		icmp
 	list icmp_type		echo-request
 	list icmp_type		echo-reply
 	list icmp_type		destination-unreachable
@@ -100,6 +89,7 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
+	option hidden		1
 
 # Allow essential forwarded IPv6 ICMP traffic
 config rule
@@ -117,37 +107,15 @@ config rule
 	option limit		1000/sec
 	option family		ipv6
 	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
+	option hidden		1
 
 # include a file with users custom iptables rules
 config include
 	option path /etc/firewall.user
 	option reload 1
 
-# include a file with rules for prioritizing some specific packets
+# include a file with rules for SIP and RTP traffic
 config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
+	option path /etc/firewall.sip
 	option reload 1
 

inteno-netmodes/files/etc/netmodes/repeater/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater/network

@@ -0,0 +1,24 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
+	option ifname '$WAN.1'
+	option reqopts '43'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/repeater/wireless

@@ -4,18 +4,11 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
 	option band 'a'
-	option bandwidth '80'
+	option bandwidth '20'
 	option hwmode '11ac'
 	option channel 'auto'
 	option scantimer '15'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 
@@ -51,7 +44,7 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
+	option autoconf '1'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -89,5 +82,5 @@ config wifi-iface
 	option cipher 'auto'
 	option wps_pbc '0'
 	option wmf_bss_enable '1'
-	option ifname 'wl1'
+	option autoconf '1'
 

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network

@@ -1,20 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS

@@ -1,21 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"SDX*",
-		"F*"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network

@@ -1,20 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/repeater_dualdown/DETAILS

@@ -8,14 +8,11 @@
 		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
 	],
 	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*",
-		"SDX*",
-		"F*"
+		"DG*",
+		"EG*",
+		"VG*"
 	],
-	"uplink_band" : "b",
 	"credentials" : 1,
 	"reboot" : 0
 }
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/firewall

@@ -0,0 +1,121 @@
+config defaults
+	option syn_flood	1
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		REJECT
+# Uncomment this line to disable ipv6 rules
+#	option disable_ipv6	1
+
+config zone
+	option name		lan
+	list   network		'lan'
+	option input		ACCEPT
+	option output		ACCEPT
+	option forward		ACCEPT
+
+config zone
+	option name		wan
+	list   network		'wan'
+	option input		REJECT
+	option output		ACCEPT
+	option forward		REJECT
+	option masq		1
+	option mtu_fix		1
+
+config forwarding
+	option src		lan
+	option dest		wan
+
+# We need to accept udp packets on port 68,
+# see https://dev.openwrt.org/ticket/4108
+config rule
+	option name		Allow-DHCP-Renew
+	option src		wan
+	option proto		udp
+	option dest_port	68
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+config rule
+	option name		Repeater-Management
+	option src		wan
+	option proto		tcp
+	option dest_port	'22 80 8080 8181 9876'
+	option target		ACCEPT
+	option family		ipv4
+	option hidden		1
+
+# Allow IPv4 ping
+config rule
+	option name		Allow-Ping
+	option src		wan
+	option proto		icmp
+	option icmp_type	echo-request
+	option family		ipv4
+	option target		ACCEPT
+	option hidden		1
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+	option name		Allow-DHCPv6
+	option src		wan
+	option proto		udp
+	option src_ip		fe80::/10
+	option src_port		547
+	option dest_ip		fe80::/10
+	option dest_port	546
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential incoming IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Input
+	option src		wan
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	list icmp_type		router-solicitation
+	list icmp_type		neighbour-solicitation
+	list icmp_type		router-advertisement
+	list icmp_type		neighbour-advertisement
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+	option name		Allow-ICMPv6-Forward
+	option src		wan
+	option dest		*
+	option proto		icmp
+	list icmp_type		echo-request
+	list icmp_type		echo-reply
+	list icmp_type		destination-unreachable
+	list icmp_type		packet-too-big
+	list icmp_type		time-exceeded
+	list icmp_type		bad-header
+	list icmp_type		unknown-header-type
+	option limit		1000/sec
+	option family		ipv6
+	option target		ACCEPT
+	option hidden		1
+
+# include a file with users custom iptables rules
+config include
+	option path /etc/firewall.user
+	option reload 1
+
+# include a file with rules for SIP and RTP traffic
+config include
+	option path /etc/firewall.sip
+	option reload 1
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/layer2_interface_ethernet

@@ -0,0 +1,6 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+	option bridge '1'
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/network

@@ -0,0 +1,24 @@
+
+config interface 'loopback'
+	option is_lan '1'
+	option ifname 'lo'
+	option proto 'static'
+	option ipaddr '127.0.0.1'
+	option netmask '255.0.0.0'
+
+config interface 'wan'
+	option type 'bridge'
+	option proto 'dhcp'
+	option vendorid 'Inteno_Repeater_$MAC4'
+	option hostname 'Inteno_Repeater_$MAC4'
+	option ifname '$WAN.1'
+	option reqopts '43'
+
+config interface 'lan'
+	option is_lan '1'
+	option type 'bridge'
+	option proto 'static'
+	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
+	option ipaddr '192.168.11.1'
+	option netmask '255.255.255.0'
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/owsd

@@ -0,0 +1,39 @@
+config owsd 'global'
+	option sock '/var/run/ubus.sock'
+	option www '/www'
+	option redirect '/cgi-bin/luci:/cacheflush.html'
+
+config owsd-listen 'loopback'
+	option port '80'
+	option interface 'loopback'
+	option ipv6 'on'
+	list origin '*'
+
+config owsd-listen 'lan'
+	option port '80'
+	option interface 'lan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	option whitelist_dhcp_domains '1'
+
+config owsd-listen 'wan'
+	option port '80'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8080'
+	option port '8080'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+
+config owsd-listen 'wan_8181'
+	option port '8181'
+	option interface 'wan'
+	option ipv6 'on'
+	option whitelist_interface_as_origin '1'
+	list origin '*'
+

inteno-netmodes/files/etc/netmodes/repeater_dualdown/wireless

@@ -4,18 +4,11 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
 	option band 'a'
-	option bandwidth '80'
+	option bandwidth '20'
 	option hwmode '11ac'
 	option channel 'auto'
 	option scantimer '15'
@@ -34,7 +27,7 @@ config wifi-device 'wl0'
 	option rifs '0'
 	option rifs_advert '0'
 	option maxassoc '32'
-	option beamforming '1'
+	option beamforming '0'
 	option doth '1'
 	option dfsc '1'
 
@@ -51,7 +44,7 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
+	option autoconf '1'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -104,5 +97,5 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
+	option autoconf '1'
 

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network

@@ -1,43 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-	option vid 1
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-	option vid 2
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless

@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apcli0
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS

@@ -1,18 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 5▴▾2.4&5" },
-		{ "sv" : "Repeater 5▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 5G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"uplink_band" : 'a',
-	"downlink_band" : 'a b',
-	"credentials" : 1,
-	"reboot" : 0
-}

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network

@@ -1,43 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-	option vid 1
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-	option vid 2
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless

@@ -1,59 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  auto
-	option bandwidth '20'
-	option hwmode   auto
-	option htmode   HT20
-	option country 'DE'
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-	option wps_pbc	1
-
-config wifi-device  rai0
-	option band a
-	option channel  auto
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-	option wps_pbc	1
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apclii0
-

inteno-netmodes/files/etc/netmodes/routed/DETAILS

@@ -7,10 +7,6 @@
 		{ "en" : "" },
 		{ "sv" : "" }
 	],
-	"excluded_boards" : [
-		"EX4*",
-		"SDX810-AP"
-	],
 	"credentials" : 0
 }
 

inteno-netmodes/files/etc/netmodes/routed/firewall

@@ -1,5 +1,5 @@
-config settings 'settings'
-        option disabled '0'
+config settings settings
+        option disabled 0
 
 config defaults
 	option syn_flood	1

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_adsl

@@ -0,0 +1,13 @@
+
+config atm_bridge
+        option link_type 'EoA'
+        option encapseoa 'llcsnap_eth'
+        option unit '0'
+        option ifname 'atm0.1'
+        option baseifname 'atm0'
+        option atmtype 'ubr'
+        option name 'atm_inet'
+        option vpi '8'
+        option vci '35'
+
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_ethernet

@@ -0,0 +1,5 @@
+config ethernet_interface 'Wan'
+        option baseifname '$WAN'
+        option ifname '$WAN.1'
+        option name 'WAN'
+

inteno-netmodes/files/etc/netmodes/routed/layer2_interface_vdsl

@@ -0,0 +1,9 @@
+config vdsl_interface
+	option unit '0'
+	option ifname 'ptm0.1'
+	option baseifname 'ptm0'
+	option name 'VDSL2'
+	option dslat '1'
+	option ptmprio '1'
+	option ipqos '1'
+

inteno-netmodes/files/etc/netmodes/routed/network

@@ -27,18 +27,3 @@ config interface 'wan6'
 	option proto 'dhcpv6'
 	option ifname '@wan'
 
-config device 'atmwan'
-	option type 'untagged'
-	option ifname 'atm0'
-	option name 'atm0.1'
-
-config device 'ptmwan'
-	option type 'untagged'
-	option ifname 'ptm0'
-	option name 'ptm0.1'
-
-config device 'ethwan'
-	option type 'untagged'
-	option ifname '$WAN'
-	option name '$WAN.1'
-

inteno-netmodes/files/etc/netmodes/routed/wireless

@@ -4,13 +4,6 @@ config wifi-status 'status'
 	option sched_status '0'
 	option schedule '0'
 
-config bandsteering 'bandsteering'
-	option enabled '0'
-	option policy '0'
-
-config apsteering 'apsteering'
-	option enabled '0'
-
 config wifi-device 'wl0'
 	option type 'broadcom'
 	option country 'EU/13'
@@ -51,7 +44,6 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl0'
 
 config wifi-device 'wl1'
 	option type 'broadcom'
@@ -91,5 +83,4 @@ config wifi-iface
 	option wps_pbc '1'
 	option wmf_bss_enable '1'
 	option bss_max '32'
-	option ifname 'wl1'
 

inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS

@@ -1,17 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"*G*",
-		"F*"
-	],
-	"reboot" : 0,
-	"credentials" : 0
-}
-

inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp

@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-

inteno-netmodes/files/etc/netmodes/routed_mtk/network

@@ -1,51 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option type 'bridge'
-	option proto 'static'
-	option is_lan '1'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ip6assign '60'
-	option ifname 'eth0.1'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-	option vid 1
-
-config interface 'wan'
-	option ifname 'eth0.2'
-	option proto 'dhcp'
-	option hostname '$IOPHOSTNAME-$MAC'
-	option vendorid '$HARDWAREID-INTENO'
-	option reqopts '66 67 128 224'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-	option vid 2
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-

inteno-netmodes/files/etc/netmodes/routed_mtk/omcproxy

@@ -1,10 +0,0 @@
-config proxy
-	option scope global
-	option uplink wan
-	list downlink lan
-
-config proxy
-	option scope global
-	option uplink wan6
-	list downlink lan
-