swmodd: Add support to pull images from registries

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.33
+PKG_VERSION:=6.8.21
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=9bdcb1ac188c44fc2274bf01dd9dce46f572b967
+PKG_SOURCE_VERSION:=ace24d82fcbf47d9437f21a1a96fa821e87a473f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 

bulkdata/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.5
+PKG_VERSION:=2.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=33a6648de9ee0af33c44518656b56b0a30b6c1ab
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -34,7 +34,7 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.6.0
+PKG_VERSION:=6.5.8
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c8c406568822b170e373a54fbf32323e960259ff
+PKG_SOURCE_VERSION:=0b7292471d89793a050fe44fbc70ea129e7c9291
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=0901382048bb7ce01fc1767fef75e54692f56743
+PKG_SOURCE_VERSION:=9ab16cb0985d9614d63e2e38ce2a14ce445a226f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif

evoice/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=evoice
-PKG_VERSION:=0.2.29
+PKG_VERSION:=0.2.25
 
 LOCAL_DEV=0
 LOCAL_DEV_EVOICE_DIR=~/voip/evoice
@@ -13,7 +13,7 @@ LOCAL_DEV_EVOICE_DIR=~/voip/evoice
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=ee4e9e00ec1c54b41e15a3de38f6a733634622dd
+PKG_SOURCE_VERSION:=3f41b639b02e0de8b9da13cbab55b6af8aa768e9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -22,6 +22,7 @@ PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 PKG_BUILD_DEPENDS:=bbf
+
 # All config variable that are passed to the make invocation, directly or
 # indirectly. This ensures that the package is rebuilt on config-changes.
 #PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
@@ -33,7 +34,7 @@ define Package/$(PKG_NAME)
 	SUBMENU:=Telephony
 	TITLE:=Ensemble Voice
 	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c\
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl\
 		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
 		+TARGET_iopsys_econet:kmod-voip_driver\
 		+TARGET_iopsys_econet:voip_app
@@ -64,12 +65,10 @@ ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
 		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
 	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
 else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
 	TARGET_PLATFORM=ECONET
 	TONES_INI_REQUIRED=y
 	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
 endif
 
 # disable temporarily some not important warnings, force PIC
@@ -96,9 +95,6 @@ define Package/evoice/install
 	$(CP) ./files/* $(1)/
 	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/

evoice/files/etc/config/voice

@@ -131,7 +131,7 @@ config IncomingMap 'IncomingMap2'
 	option Line 'Line2'
 
 config IncomingMap 'IncomingMap3'
-	option Enable '0'
+	option Enable '1'
 	option Extension 'Extension2'
 	option Line 'Line1'
 

evoice/files/etc/init.d/evoice

@@ -10,12 +10,6 @@ VOICE_UCI_CONFIG=voice
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
 	procd_open_instance
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"

evoice/files/lib/voice/codecs_airoha.json

@@ -1,28 +0,0 @@
-{
-        "G.711ALaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.711MuLaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.726": {
-                "BitRate": 32000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.729": {
-                "BitRate": 8000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.722": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        }
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,28 +0,0 @@
-{
-        "G.711ALaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.711MuLaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.726": {
-                "BitRate": 32000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.729": {
-                "BitRate": 8000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.722": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        }
-}
-

gryphon-led-module/Makefile

@@ -44,15 +44,7 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	MODULES_SUBDIR:=lib/modules/4.19.225
 	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))

icwmp/Makefile

@@ -1,24 +1,24 @@
 #
 # Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.0.3
+PKG_VERSION:=8.5.9
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=304db5eb064d89cf4e4df0bb81fa22b88933d602
+PKG_SOURCE_VERSION:=5553a890ae29692d8e3c7e1b1734adb0722b020a
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk

icwmp/files/etc/config/cwmp

@@ -32,7 +32,7 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'

icwmp/files/etc/init.d/icwmpd

@@ -469,7 +469,6 @@ reload_service() {
 	ret="0"
 	if [ "$enable_cwmp" = "0" ]; then
 		stop
-		start
 		return 0
 	fi
 

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.10.7
+PKG_VERSION:=4.10.6
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b50f79061a95840d89a6129aa0a95aff82b5a1b7
+PKG_SOURCE_VERSION:=a213ee8c1f2195bbce1756e033e7a774ef4b5d2a
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip

ieee1905/files/etc/config/ieee1905

@@ -2,7 +2,7 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	option registrar '2 5 6'
+	option registrar '2 5'
 #	option macaddress '0a:1b:2c:3d:4e:50'
 
 config al-iface
@@ -24,9 +24,3 @@ config ap
 	option encryption 'sae-mixed'
 	option key '1234567890'
 
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-

ieee1905/files/etc/init.d/ieee1905

@@ -42,7 +42,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
+			'band:or("2", "5", "60")' \
 			'ssid:string' \
 			'encryption:or("psk2", "sae-mixed", "sae", string)' \
 			'key:string' \

iop/scripts/iopupgrade.sh

@@ -1,282 +1,344 @@
 # this is a developer helper script to install firmware on a remote host with SSH
 
 function upd_usage {
-	echo "usage: $0 ssh_upgrade [-t <host>] [-f <file>] [opts] "
-	echo ""
-	echo "   Default host is 192.168.1.1"
-	echo "   Default firmware file is the latest one (last.{itb,pkgtb})"
-	echo "   Default is to not keep configuration"
-	echo "opts:"
-	echo ""
-	echo "	-i	Interactive use, allows to select firmware file"
-	echo "	-n	Do not do the final reboot of the target board"
-	echo "	-c	Keep configuration"
-	echo "	-x	Force install even if firmware is not for this board"
-	echo "	-b	Force install of bootloader regardless of version installed"
+    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
+    echo ""
+    echo "   Default host is 192.168.1.1"
+    echo "   Default firmware file is the newest one found"
+    echo "   Default is to not keep configuration"
+    echo "opts:"
+    echo ""
+    echo "	-i	Interactive use, Allows to select firmware file"
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
 }
 
 function set_config_string {
-	eval $(grep $1 .config)
+    eval `grep $1 .config`
 }
 
 function upd_ask_ok {
-	echo "Will continue with the following settings:"
-	echo "-----------------------------------------"
-	printf "%20s: %s\n" "Firmware file" "$upd_fw_base"
-	printf "%20s: %s\n" "Host IP" "$upd_host"
-	printf "%20s: " "Reboot"
-	if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Keep config"
-	if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force bootloader"
-	if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force image upgrade"
-	if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	echo "-----------------------------------------"
+    echo "Will Continue with the following settings"
+    echo "-----------------------------------------"
+    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
+    printf "%20s: %s\n"  "Host ip" "$upd_host"
+    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    echo "-----------------------------------------"
 
-	echo -n "Continue? [Y/n/q]:"
-	read answer
+    if [ "$upd_sysupgrade" == "0" ]
+       then
+	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
+    fi
 
-	case $answer in
-	n | N)
-		return 1
-		;;
-	q | Q)
-		exit 1
-		;;
-	y | Y | *)
-		return 0
-		;;
-	esac
+    echo -n "Continue? [Y/n/q]:"
+    read answer
+
+    case $answer in
+	n|N)
+	    return 1;;
+	q|Q)
+	    exit 1;;
+	y|Y|*)
+	    return 0;;
+    esac
 }
 
 function upd_select_file {
-	dialog --keep-tite --title "To select a file, use TAB/ARROW to highlight then press SPACEBAR -> RETURN" \
-		--fselect "${upd_fw:-bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/}" \
-		$((lines - 10)) $((cols - 5)) \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_fw="$new_file"
-		upd_fw_base=$(basename $upd_fw)
-	fi
+    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
+	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
+	   $((lines -10)) $((cols -5)) \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_fw="$new_file"
+	upd_fw_base=$(basename $upd_fw);
+    fi
 }
 
 function upd_select_target {
-	dialog --keep-tite --title "Input the hostname/IP of the target board" \
-		--inputbox "Name/IP" \
-		$((lines - 10)) $((cols - 5)) \
-		"$upd_host" \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_host="$new_file"
-	fi
+    dialog --keep-tite --title "Input the name/ip number of target board" \
+	   --inputbox "Name/IP" \
+	   $((lines -10)) $((cols -5)) \
+	   "$upd_host" \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_host="$new_file"
+    fi
 }
 
-function upd_select_reboot {
-	dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Reboot" "Restart board after done" $(if [ "$upd_noreboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		"No reboot" "Continue running old system" $(if [ "$upd_noreboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+function upd_select_reboot {
+    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
 	"No reboot")
-		upd_noreboot=1
-		;;
+	    upd_noreboot=1
+	;;
 	"Reboot")
-		upd_noreboot=0
-		;;
-	esac
+	    upd_noreboot=0
+	    ;;
+    esac
 }
 
 function upd_select_config {
-	dialog --keep-tite --radiolist "Should the configuration be kept" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Keep" "Keep the config from old system" $(if [ "$upd_keepconf" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Default" "Use default config for new system" $(if [ "$upd_keepconf" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the configuration be keept" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Keep")
-		upd_keepconf=1
-		;;
+	    upd_keepconf=1
+	    ;;
 	"Default")
-		upd_keepconf=0
-		;;
-	esac
+	    upd_keepconf=0
+	    ;;
+    esac
 }
 
 function upd_select_forceboot {
-	dialog --keep-tite --radiolist "Should the boot loader be updated regardless of the version installed" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Always update boot loader" $(if [ "$upd_forceboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Version check" "Only upgrade if version is newer" $(if [ "$upd_forceboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceboot=1
-		;;
+	    upd_forceboot=1
+	    ;;
 	"Version check")
-		upd_forceboot=0
-		;;
-	esac
+	    upd_forceboot=0
+	    ;;
+    esac
 }
 
 function upd_select_forceimage {
-	dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Disable sanity check and force use of image (dangerous)" $(if [ "$upd_forceimage" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Only compatible" "Normal checks apply" $(if [ "$upd_forceimage" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceimage=1
-		;;
+	    upd_forceimage=1
+	    ;;
 	"Only compatible")
-		upd_forceimage=0
-		;;
-	esac
+	    upd_forceimage=0
+	    ;;
+    esac
+}
+
+function upd_select_sysupgrade {
+    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
+	"iopu")
+	    upd_sysupgrade=0
+	    ;;
+	"sysupgrade")
+	    upd_sysupgrade=1
+	    ;;
+    esac
 }
 
 function upd_select {
-	dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select item to change" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Firmware file" "$upd_fw_base" \
-		"Host IP" "$upd_host" \
-		"Reboot" $(if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Keep config" $(if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force bootloader" $(if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force image upgrade" $(if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		2>$tempfile
 
-	case $(cat $tempfile) in
-	"Firmware file")
-		upd_select_file
-		;;
-	"Host IP")
-		upd_select_target
-		;;
+    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Firmare file" "$upd_fw_base"\
+	   "Host ip" "$upd_host" \
+	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   2> $tempfile
+
+
+    case $(cat $tempfile) in
+	"Firmare file")
+	    upd_select_file
+	    ;;
+	"Host ip")
+	    upd_select_target
+	    ;;
 	"Reboot")
-		upd_select_reboot
-		;;
+	    upd_select_reboot
+	    ;;
 	"Keep config")
-		upd_select_config
-		;;
+	    upd_select_config
+	    ;;
 	"Force bootloader")
-		upd_select_forceboot
-		;;
+	    upd_select_forceboot
+	    ;;
 	"Force image upgrade")
-		upd_select_forceimage
-		;;
+	    upd_select_forceimage
+	    ;;
+	"sysupgrade")
+	    upd_select_sysupgrade
+	    ;;
 	*)
-		return
-		;;
-	esac
-	upd_select
+	    return
+	;;
+    esac
+    upd_select
 }
 function upd_select_start {
-	lines=$(tput lines)
-	cols=$(tput cols)
-	tempfile="$(mktemp)"
-	trap "rm -f $tempfile" 0 1 2 5 15
-	upd_select
+    lines=$(tput lines)
+    cols=$(tput cols)
+    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
+    trap "rm -f $tempfile" 0 1 2 5 15
+    upd_select
 
 }
 
 function ssh_upgrade {
-	upd_noreboot=0
-	upd_forceboot=0
-	upd_keepconf=0
-	upd_forceimage=0
-	upd_fw_base=""
-	upd_fw=""
-	upd_host="192.168.1.1"
-	do_dialog=0
+    upd_noreboot=0
+    upd_forceboot=0
+    upd_keepconf=0
+    upd_forceimage=0
+    upd_fw_base=""
+    upd_fw=""
+    upd_host="192.168.1.1"
+    upd_sysupgrade=1
+    do_dialog=0
 
-	while getopts "f:hnxt:icb" opt; do
-		case $opt in
-		n)
-			upd_noreboot=1
-			;;
-		x)
-			upd_forceimage=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		c)
-			upd_keepconf=1
-			;;
-		v)
-			verbose=$OPTARG
-			;;
-		f)
-			upd_fw=$OPTARG
-			;;
-		t)
-			upd_host=$OPTARG
-			;;
-		i)
-			do_dialog=1
-			;;
-		h)
-			upd_usage
-			exit 1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-		esac
-	done
-
-	if [ -z "$upd_fw" ]; then
-		set_config_string CONFIG_TARGET_BOARD
-		set_config_string CONFIG_TARGET_SUBTARGET
-		upd_fw="$(realpath -q --canonicalize-existing --relative-to=. "bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/"last.{pkgtb,itb})"
-		if [ -z "$upd_fw" ] && [ $do_dialog -eq 0 ]; then
-			echo "Could not find image. Check that last.{itb,pkgtb} exists or specify an image using -f <image> or -i (interactive)." >&2
-			return 1
-		fi
-	fi
-	upd_fw_base="$(basename "$upd_fw")"
-
-	[ $do_dialog -eq 1 ] && upd_select_start
-
-	if ! upd_ask_ok; then
-		upd_select_start
-		if ! upd_ask_ok; then
-			exit 1
-		fi
-	fi
-
-	if [ ! -f $upd_fw ]; then
-		echo "Firmware file $firmware does not exist."
+    while getopts "f:hnxt:iscb" opt; do
+	case $opt in
+	    n)
+		upd_noreboot=1
+		;;
+	    x)
+		upd_forceimage=1
+		;;
+	    b)
+		upd_forceboot=1
+		;;
+	    c)
+		upd_keepconf=1
+		;;
+	    v)
+		verbose=$OPTARG
+		;;
+	    f)
+		upd_fw=$OPTARG
+		;;
+	    t)
+		upd_host=$OPTARG
+		;;
+	    i)
+		do_dialog=1
+		;;
+	    s)
+		upd_sysupgrade=1
+		;;
+	    h)
+		upd_usage
 		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -n "$upd_fw" ]
+    then
+	upd_fw_base=$(basename $upd_fw);
+    else
+	set_config_string CONFIG_TARGET_BOARD
+	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
+
+	# if target uses pkgtb
+	if [ -z "$firmwares"]
+	then
+	    # pkgtb files can not be streamed so copy over the file witch scp
+	    use_scp=1
+	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
 	fi
 
-	extra_args=""
-	[ $upd_noreboot -eq 1 ] && extra_args="$extra_args --no-reboot"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args --force"
-	[ $upd_keepconf -eq 0 ] && extra_args="$extra_args -n"
-	[ $upd_forceboot -eq 1 ] && extra_args="$extra_args --force-loader-upgrade"
+	for upd_fw_base in $firmwares
+	do
+	    #echo "firmware $upd_fw"
+	    break
+	done
+	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
+    fi
 
-	pv "$upd_fw" |
-		ssh \
-			-o ConnectTimeout=60 \
-			root@"$upd_host" \
-			sh -c "cat > '/tmp/$upd_fw_base' && (set -x && sysupgrade -v $extra_args /tmp/$upd_fw_base)" ||
-		echo "Sysupgrade failed" >&2 && return 1
+    [ $do_dialog -eq 1 ] && upd_select_start
+
+    if ! upd_ask_ok
+    then
+	upd_select_start
+	if ! upd_ask_ok
+	then
+	    exit 1
+	fi
+    fi
+
+    if [ ! -f $upd_fw ]
+    then
+	echo "firmware file $firmware do not exist"
+	exit 1
+    fi
+
+    if [ $upd_sysupgrade -eq 0 ]
+    then
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
+	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
+	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
+
+	file_size_kb=`du -k "$upd_fw" | cut -f1`
+	if [ "$use_scp" == "1" ]
+	then
+	    scp $upd_fw root@$upd_host:/tmp/ &&
+		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
+	else
+	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
+	fi
+    else
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
+	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
+
+	scp $upd_fw root@$upd_host:/tmp/ &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    echo "sysupgrade done!"
+    fi
 }
 
 register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
+
+

map-agent/Config.in

@@ -13,22 +13,5 @@ config AGENT_ISLAND_PREVENTION
 config AGENT_EASYMESH_R2_CERT
 	bool "Compile for WFA test bed"
 
-
-config AGENT_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through AGENT_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-agent/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.10.3.14
+PKG_VERSION:=2.10.2.5
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=449eb907b121b7224cbfedcf51246e438f2b30d6
+PKG_SOURCE_VERSION:=aed9b1fa91772fe9c15d5ca93833e8bfbdbeda57
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=BSD-3-Clause
@@ -71,11 +71,6 @@ ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
 TARGET_CFLAGS += -DEASYMESH_R2_CERT
 endif
 
-ifeq ($(CONFIG_AGENT_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_AGENT_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 MAKE_PATH:=src
 
 define Package/map-agent/install

map-agent/files/etc/init.d/mapagent

@@ -215,10 +215,6 @@ validate_agent_config() {
 	return 0
 }
 
-create_dir() {
-        mkdir -p /var/run/multiap
-}
-
 start_service() {
 	[ -f /usr/sbin/dynbhd ] && start_dynbhd_service
 
@@ -238,7 +234,6 @@ start_service() {
 	[ "$ts" -eq 1 ] && create_map #|| remove_map
 
 	procd_open_instance
-	create_dir
 	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1

map-controller/Config.in

@@ -6,21 +6,5 @@ config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 	bool "Support Dynamic Controller configuration sync"
 	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
 
-config CONTROLLER_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through CONTROLLER_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-controller/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.11.0.4
+PKG_VERSION:=2.11.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=a4a626539ede73c1c4eb1ad768331524a8ee9ce8
+PKG_SOURCE_VERSION:=f74c6625967c6ab7f413a70fe72a876e5757ac22
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -49,10 +49,6 @@ ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
 
-ifeq ($(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/

map-topology/Config.in

@@ -1,22 +0,0 @@
-if (PACKAGE_map-topology)
-
-menu "Configurations"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through TOPOLOGYD_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.4
+PKG_VERSION:=2.5.1.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=488ce1ce576b57c9b3c4d7c034969bf65e66216f
+PKG_SOURCE_VERSION:=01a58d068adea4636e984291f39d7694ea30860c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
@@ -31,10 +31,6 @@ define Package/map-topology
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
-define Package/map-topology/config
-	source "$(SOURCE)/Config.in"
-endef
-
 TARGET_CFLAGS += \
 	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
@@ -48,11 +44,6 @@ endef
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/map-topology/* $(PKG_BUILD_DIR)/

obuspa/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=5.0.0.21
+PKG_VERSION:=5.0.0.20
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)

obuspa/files/etc/uci-defaults/01-fix-upgrade-uci

@@ -5,14 +5,14 @@
 fix_stomp_section() {
 	local encryption
 
-	config_get_bool encryption $1 encryption ""
-	if [ -n "${encryption}" ]; then
-		uci_set obuspa $1 encryption ""
-		uci_set obuspa $1 EnableEncryption "$encryption"
-	fi
+	config_get_bool encryption $1 encryption "1"
+	uci_set obuspa $1 encryption ""
+	uci_set obuspa $1 EnableEncryption "$encryption"
 }
 
-# fix the stomp encryption parameter
+# Copy defaults by the factory to the cwmp UCI user section.
 config_load obuspa
 config_foreach fix_stomp_section stomp
 uci_commit
+
+# No need for commit here, it is done by uci_apply_defaults().

port-management/files/etc/uci-defaults/15-ports-config-generate

@@ -73,7 +73,7 @@ fi
 
 touch /etc/config/ports
 
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
+if [ -f /sbin/db ] && [ -f /etc/board-db/config/hw ]; then
 	populate_config_from_db
 elif [ -d /proc/device-tree/ ]; then
 	populate_config_from_device_tree

skopeo/Makefile

@@ -2,13 +2,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=skopeo
 PKG_VERSION:=1.9.2
-PKG_RELEASE:=1
+PKG_RELEASE:=$(AUTORELEASE)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_NAME:=skopeo
 PKG_SOURCE_URL:=https://github.com/containers/skopeo.git
 PKG_SOURCE_VERSION:=v$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-v$(PKG_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=Apache-2.0
@@ -16,9 +16,6 @@ PKG_LICENSE_FILES:=LICENSE
 
 HOST_BUILD_DEPENDS:=golang/host
 HOST_BUILD_PARALLEL:=1
-
-PKG_BUILD_DEPENDS:=golang/host
-PKG_BUILD_PARALLEL:=1
 PKG_USE_MIPS16:=0
 
 GO_PKG:=github.com/containers/skopeo

sulu-builder/Config.in

@@ -13,7 +13,7 @@ menu "SULU_CORE"
 
 	config SULU_CORE_VERSION
 		string "SULU repo version"
-		default "944f4e2217e478c04f1ef56ae67c66d82ece7994"
+		default "0342f68af7e74a71d771ed4b562af64e15877721"
 endmenu
 
 menu "SULU_PLUGIN_LCM"
@@ -35,7 +35,7 @@ menu "SULU_PLUGIN_LCM"
 	config SULU_PLUGIN_LCM_VERSION
 		depends on SULU_PLUGIN_LCM_ENABLE
 		string "Version"
-		default "f8a96f1c55904082c0658ee63aebe1e67a097f42"
+		default "ae0da97828665aa953459c7f49ed26c656819d4d"
 endmenu
 
 menu "SULU_PLUGIN_MULTIAP"
@@ -57,7 +57,7 @@ menu "SULU_PLUGIN_MULTIAP"
 	config SULU_PLUGIN_MULTIAP_VERSION
 		depends on SULU_PLUGIN_MULTIAP_ENABLE
 		string "Version"
-		default "89b4e4b95d3a94b88782f5cdc9d1eafd5728a1f7"
+		default "0ee8a4dd07d722d06dd7617d2debf138da6df8b7"
 endmenu
 
 menu "SULU_THEME_IOPSYS"

sulu-builder/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu-builder
-PKG_VERSION:=1.1.4
+PKG_VERSION:=1.0.15
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-builder.git
-PKG_SOURCE_VERSION:=ca38b2086cee7ba83b41eec56539e9432271a349
+PKG_SOURCE_VERSION:=fc53497b2783d2c5f372aa9b8a803224cdc85f83
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 

sulu/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu
-PKG_VERSION:=1.1.4
+PKG_VERSION:=1.0.15
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu.git
-PKG_SOURCE_VERSION:=ca38b2086cee7ba83b41eec56539e9432271a349
+PKG_SOURCE_VERSION:=fc53497b2783d2c5f372aa9b8a803224cdc85f83
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz

swmodd/Config.in

@@ -1,22 +0,0 @@
-menu "Configuration"
-	depends on PACKAGE_swmodd
-
-	config SWMODD_LXC_SUPPORT
-		bool "Handles LXC based containers"
-		default n
-		depends on PACKAGE_swmodd
-		select PACKAGE_liblxc
-
-	config SWMODD_OCI_SUPPORT
-		bool "Handles OCI containers"
-		default y
-		depends on PACKAGE_swmodd
-		select PACKAGE_crun
-
-	config SWMODD_REGISTRY_PULL_SUPPORT
-		bool "Add support to pull images from container image registries (i.e: docker.io, quay.io)"
-		default n
-		depends on PACKAGE_swmodd
-		select PACKAGE_skopeo
-		select PACKAGE_umoci
-endmenu

swmodd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.1.16
+PKG_VERSION:=2.1.9
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5124ea8051c06e8c3563b384660b08db199c93eb
+PKG_SOURCE_VERSION:=2941682d0e8c3a509b8e5b03e6b03609619ca542
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -39,10 +39,6 @@ define Package/swmodd/description
 	Software module daemon to manage software/deployment units using TR181 datamodel.
 endef
 
-define Package/swmodd/config
-	source "$(SOURCE)/Config.in"
-endef
-
 define Package/swmodd-cgroup
   SECTION:=utils
   CATEGORY:=Utilities

swmodd/files/etc/init.d/crun

@@ -9,6 +9,18 @@ log() {
 	echo "${@}"|logger -t crun.init -p info
 }
 
+validate_container_section() {
+	uci_validate_section swmodd du_eu_assoc "${1}" \
+		'name:string' \
+		'type:string' \
+		'autostart:bool:1' \
+		'du_status:string' \
+		'requested_state:string' \
+		'url:string' \
+		'username:string' \
+		'password:string'
+}
+
 is_container_running() {
 	crun list |tail -n +2|grep -wq "^${1}"
 	return $?
@@ -19,18 +31,14 @@ configure_crun_container() {
 	local BRIDGE BUNDLE
 	local RUNNER="/etc/swmodd/run.sh"
 
+	validate_container_section "${1}" || {
+		log "Validation of container section failed"
+		return 0;
+	}
+
 	BUNDLE="${2}"
 	BRIDGE="${3}"
 
-	config_get name ${1} name ""
-	config_get type ${1} type ""
-	config_get_bool autostart ${1} autostart 1
-	config_get du_status ${1} du_status ""
-	config_get requested_state ${1} requested_state ""
-	config_get url ${1} url ""
-	config_get username ${1} username ""
-	config_get password ${1} password ""
-
 	if [ -z "${name}" ] || [ -z "${type}" ] || [ -z "${du_status}" ]; then
 		return 0;
 	fi
@@ -42,31 +50,16 @@ configure_crun_container() {
 	if [ "${du_status}" == "Installing" ]; then
 		local result
 		log "Pull image from registry"
-		uci_set ocicontainer ${1} du_status Installing_start
-		uci_set ocicontainer ${1} username ""
-		uci_set ocicontainer ${1} password ""
+		uci_set swmodd ${1} du_status Installing_start
+		uci_set swmodd ${1} username ""
+		uci_set swmodd ${1} password ""
 		result=$(${RUNNER} -b "${BUNDLE}" -n "${name}" -r "${url}" -l "${username}:${password}")
 		if [ "$?" -eq 0 ]; then
-			result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_description")
-			if [ "${result}" != "null" ]; then
-				uci_set ocicontainer ${1} description "${result}"
-			fi
-
-			result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_vendor")
-			if [ "${result}" != "null" ]; then
-				uci_set ocicontainer ${1} vendor "${result}"
-			fi
-
-			result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_version")
-			if [ "${result}" != "null" ]; then
-				uci_set ocicontainer ${1} version "${result}"
-			fi
-
-			uci_set ocicontainer ${1} du_status Installing_success
+			uci_set swmodd ${1} du_status Installing_success
 			du_status="Installed"
 		else
-			uci_set ocicontainer ${1} du_status Installing_failed
-			uci_set ocicontainer ${1} fault_string "${result}"
+			uci_set swmodd ${1} du_status Installing_failed
+			uci_set swmodd ${1} fault_string "${result}"
 			return 0;
 		fi
 	fi
@@ -83,10 +76,10 @@ configure_crun_container() {
 
 		# If directory still exists then uninstall failed
 		if [ -d "${BUNDLE}/${name}" ]; then
-			uci_set ocicontainer ${1} du_status Uninstalling_failed
-			uci_set ocicontainer ${1} fault_string "Failed to remove ${BUNDLE}/${name}"
+			uci_set swmodd ${1} du_status Uninstalling_failed
+			uci_set swmodd ${1} fault_string "Failed to remove ${BUNDLE}/${name}"
 		else
-			uci_set ocicontainer ${1} du_status Uninstalling_success
+			uci_set swmodd ${1} du_status Uninstalling_success
 		fi
 		# Delete the uci config section after uninstall
 		log "CRUN container ${name} removed"
@@ -119,20 +112,6 @@ configure_crun_container() {
 		fi
 	else
 		${RUNNER} -U -b "${BUNDLE}" -n "${name}"
-		result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_description")
-		if [ "${result}" != "null" ]; then
-			uci_set ocicontainer ${1} description "${result}"
-		fi
-
-		result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_vendor")
-		if [ "${result}" != "null" ]; then
-			uci_set ocicontainer ${1} vendor "${result}"
-		fi
-
-		result=$(cat ${BUNDLE}/${name}/config.json |jq ".annotations.org_opencontainers_image_version")
-		if [ "${result}" != "null" ]; then
-			uci_set ocicontainer ${1} version "${result}"
-		fi
 	fi
 
         procd_open_instance "${name}"
@@ -154,7 +133,7 @@ start_service() {
 	fi
 
 	config_load swmodd
-	config_get bundle globals oci_bundle_root ""
+	config_get bundle globals bundle_root ""
 	config_get bridge globals lan_bridge "br-lan"
 
 	if [ -z "${bundle}" ] || [ -z "${bridge}" ]; then
@@ -162,14 +141,10 @@ start_service() {
 		return 0;
 	fi
 
-	if [ -f "${bundle}/ocicontainer" ]; then
-		UCI_CONFIG_DIR="${bundle}"
-		config_load ocicontainer
-		config_foreach configure_crun_container du_eu_assoc "${bundle}" "${bridge}"
-		uci_commit
-		# Add a timer for DuStateChange!
-		(sleep 5 && ubus -t 5 call swmodules reload) &
-	fi
+	mkdir -p "${bundle}"
+	config_foreach configure_crun_container du_eu_assoc "${bundle}" "${bridge}"
+	uci_commit
+	ubus -t 5 call swmodules reload
 }
 
 stop_service() {

swmodd/files/etc/init.d/swmodd

@@ -12,68 +12,25 @@ validate_globals_section()
 		'enabled:bool:1' \
 		'debug:bool:false' \
 		'log_level:uinteger:1' \
-		'lxc_bundle_root:string' \
-		'oci_bundle_root:string' \
+		'bundle_root:string' \
 		'sock:string'
 }
 
-start_lxc_container() {
-	config_get name "${1}" name ""
-	config_get type "${1}" type ""
-	config_get autostart "${1}" autostart "0"
-	config_get timeout "${1}" timeout "300"
-
-	if [ -z "${name}" ] || [ -z "${type}" ]; then
-		return 0;
-	fi
-
-	if [ "${type}" != "lxc" ]; then
-		return 0;
-	fi
-
-	state=$(lxc-ls -f | tail -n +2 | grep -w "${name}" | cut -d " " -f 2)
-	if [ -z "${state}" ]; then
-		return 0;
-	fi
-
-	if [ "${autostart}" == "0" ]; then
-		if [ "${state}" == "RUNNING" ]; then
-			# stop the container if running
-			lxc-stop -n "${name}" -t "${timeout}" &
-			return 0;
-		elif [ "${state}" == "FROZEN" ]; then
-			# first unfreeze then stop
-			lxc-unfreeze -n "${name}"
-			lxc-stop -n "${name}" -t "${timeout}" &
-			return 0;
-		fi
-	else
-		if [ "${state}" == "FROZEN" ]; then
-			# unfreeze the container
-			lxc-unfreeze -n "${name}"
-		elif [ "${state}" == "STOPPED" ]; then
-			# start the container
-			lxc-start -n "${name}"
-			return 0;
-		fi
-	fi
-}
-
 start_service() {
-	local enabled debug log_level sock lxc_bundle_root oci_bundle_root
+	local enabled debug log_level sock bundle_root
 
 	config_load swmodd
 
 	validate_globals_section || {
+		log "Validation of uci globals failed"
 		return 1;
 	}
 
 	[ "${enabled}" -eq 0 ] && return 0
 
-	# Create the bundle paths if not present
-	[ -n "${lxc_bundle_root}" ] && mkdir -p "${lxc_bundle_root}"
-	[ -n "${oci_bundle_root}" ] && mkdir -p "${oci_bundle_root}"
+	[ -z "${bundle_root}" ] && return 0
 
+	mkdir -p "${bundle_root}"
 	procd_open_instance swmodd
 	procd_set_param command ${PROG}
 
@@ -89,13 +46,6 @@ start_service() {
 
 	procd_set_param respawn
 	procd_close_instance
-
-	# Auto-start the lxc containers
-	if [ -f "${lxc_bundle_root}/lxccontainer" ]; then
-		UCI_CONFIG_DIR="${lxc_bundle_root}"
-		config_load lxccontainer
-		config_foreach start_lxc_container container
-	fi
 }
 
 reload_service() {

swmodd/files/etc/swmodd/run.sh

@@ -101,17 +101,10 @@ update_network_ns() {
     json_select ..
 }
 
-nginx_hack() {
-	# replace nginx user to root user
-	if [ -f "${BUNDLE:?}/${NAME:?}/rootfs/etc/nginx/nginx.conf" ]; then
-		sed -i 's/^user .*;$/user root;/' "${BUNDLE}/${NAME}/rootfs/etc/nginx/nginx.conf"
-	fi
-}
-
 update_config_json() {
 
 	if [ ! -f "${BUNDLE:?}/${NAME:?}/config.json" ]; then
-		log "config.json not found or bundle missing"
+		log "config.json not found"
 		exit 0;
 	fi
 
@@ -132,12 +125,10 @@ update_config_json() {
 	json_select linux
 	json_for_each_item update_network_ns namespaces
 	json_dump >config.json
-
-	nginx_hack
 }
 
 pull_image_from_registry() {
-	local temp disksize exsize
+	local temp
 
 	if [ -z "${BUNDLE}" -o -z "${NAME}" -o -z "${REGURL}" ]; then
 		log "Information missing for installation"
@@ -152,30 +143,15 @@ pull_image_from_registry() {
 	check_binary skopeo
 	check_binary umoci
 	temp="$(mktemp -d)"
-	if [ ! -d "${temp}" ]; then
-		log "Failed to create temp directory"
-		exit 1
-	fi
-
 	cd "${temp}"
 	OPTS=""
-	INSPECT_OPT=""
 	if [ "${#LOGIN}" -gt 3 ]; then
 		OPTS="--src-creds ${LOGIN}"
-		INSPECT_OPT="--creds ${LOGIN}"
-	fi
-	if ! skopeo --command-timeout 4m copy ${OPTS} ${REGURL} oci:${NAME}_tmp:latest >/dev/null 2>&1; then
-		log "Failed to download image"
-		cd -
-		rm -rf "${temp}"
-		exit 1
-	fi
-	if ! umoci unpack --image ${NAME}_tmp:latest ${NAME} >/dev/null 2>&1; then
-		log "Failed to unpack image"
-		cd -
-		rm -rf "${temp}"
-		exit 1
 	fi
+	# inspect and get size check system
+	# skopeo inspect --raw docker://mengel38/finalfate:latest-arm32v7 |jq '[ .layers[].size ] | add'
+	skopeo --command-timeout 4m copy ${OPTS} ${REGURL} oci:${NAME}_tmp:latest >/dev/null 2>&1
+	umoci unpack --image ${NAME}_tmp:latest ${NAME} >/dev/null 2>&1
 	rm -rf "${NAME}_tmp"
 	if [ ! -f "${NAME}/config.json" ]; then
 		log "Failed to pull the image config missing"
@@ -184,16 +160,6 @@ pull_image_from_registry() {
 		exit 1
 	fi
 
-	# Check disk available space before copy
-	disksize=$(df -P -k ${BUNDLE} |tail -n +2 |awk '{print $4}')
-	exsize=$(du -s ${temp} |awk '{print $1}')
-	if [ "${disksize}" -lt "${exsize}" ]; then
-		log "Disk space ${disksize} less that required ${exists}"
-		cd -
-		rm -rf "${temp}"
-		exit 1
-	fi
-
 	mv ${NAME} ${BUNDLE}/
 	if [ "$?" -ne 0 ]; then
 		log "Failed ${name} move in ${BUNDLE}"

swmodd/files/etc/uci-defaults/01-fix-bundle-path

@@ -2,42 +2,20 @@
 
 . /lib/functions.sh
 
+# if bundle_root not define in swmodd, update it with lxc path
 lxc=""
-lxc_bundle=""
-oci_bundle=""
+bundle=""
 
 if [ -f "/etc/lxc/lxc.conf" ]; then
 	lxc=$(cat /etc/lxc/lxc.conf |grep "lxc.lxcpath"| cut -d "=" -f 2)
 fi
 
 config_load swmodd
-config_get lxc_bundle globals lxc_bundle_root ""
-config_get oci_bundle globals oci_bundle_root ""
-
-if [ -n "${lxc_bundle}" ]; then
-	# if lxc_bundle_root define in swmodd, update it in lxc path
-	mkdir -p /etc/lxc
-	echo "lxc.lxcpath = ${lxc_bundle}" > /etc/lxc/lxc.conf
-elif [ -n "${lxc}" ]; then
-	# if lxc_bundle_root not define in swmodd, update it with lxc path
-	uci_set swmodd globals lxc_bundle_root ${lxc}
+config_get bundle globals bundle_root ""
+if [ -z "${bundle}" ] && [ -n "${lxc}" ]; then
+	uci_set swmodd globals bundle_root ${lxc}
 	uci_commit
-else
-	mkdir -p /etc/lxc
-	echo "lxc.lxcpath = /srv/" > /etc/lxc/lxc.conf
-	uci_set swmodd globals lxc_bundle_root "/srv/"
-	uci_commit
-fi
-
-if [ -z "${oci_bundle}" ] && [ -n "${lxc_bundle}" ]; then
-	# if oci_bundle_root not defined in swmodd, update it with lxc_bundle_root if defined
-	uci_set swmodd globals oci_bundle_root ${lxc_bundle}
-	uci_commit
-elif [ -z "${oci_bundle}" ] && [ -n "${lxc}" ]; then
-	# if oci_bundle_root not defined in swmodd, update it with lxc path
-	uci_set swmodd globals oci_bundle_root ${lxc}
-	uci_commit
-elif [ -z "${oci_bundle}" ]; then
-	uci_set swmodd globals oci_bundle_root "/srv/"
+elif [ -z "${bundle}" ]; then
+	uci_set swmodd globals bundle_root "/tmp/"
 	uci_commit
 fi

twamp/Makefile

@@ -6,13 +6,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=twamp
-PKG_VERSION:=1.2.1
+PKG_VERSION:=1.2.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/twamp-light.git
-PKG_SOURCE_VERSION:=b0111c35ff4908edd82c5d5f4a3c0d6809605b94
+PKG_SOURCE_VERSION:=4dfc8609fb0cefaaf9e86b559b1e10488117cf07
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -41,7 +41,7 @@ TARGET_CFLAGS += \
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-	$(CP) -rf ~/git/twamp-light/* $(PKG_BUILD_DIR)/
+	$(CP) -rf ~/git/twamp/* $(PKG_BUILD_DIR)/
 endef
 endif
 
@@ -58,7 +58,6 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_BIN) ./files/etc/init.d/twampd $(1)/etc/init.d/twampd
 	$(INSTALL_BIN) ./files/etc/firewall.twamp $(1)/etc/firewall.twamp
 	$(INSTALL_BIN) ./files/etc/uci-defaults/92-twampfirewall $(1)/etc/uci-defaults/92-twampfirewall
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-twamp_fix_reflector $(1)/etc/uci-defaults/93-twamp_fix_reflector
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

twamp/files/etc/config/twamp

@@ -1,5 +1,11 @@
+
 config twamp 'twamp'
 	option enable '0'
 	#Log levels: Critical=0, Error=1, Warning=2, Notice=3, Info=4, Debug=5
-	option log_level '3'
+	option log_level '4'
 
+config twamp_reflector 'reflector_1'
+	option enable '0'
+	option interface 'wan'
+	option port '862'
+	option max_ttl '1'

twamp/files/etc/firewall.twamp

@@ -29,7 +29,7 @@ function configure_firewall()
 
 function delete_rule()
 {
-        while iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" > /dev/null 2>&1; do
+        while iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" > /dev/null; do
 		iptables -w 1 -D zone_${1}_input $(iptables -w 1 -L zone_${1}_input --line-numbers | grep "TWAMP reflector port" | head -1|awk '{print $1}');
 	done
 }

twamp/files/etc/uci-defaults/93-twamp_fix_reflector

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-function rename_section()
-{
-	local enable inst
-
-	config_get interface ${1} interface ""
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	inst="$(echo ${1}|cut -d '_' -f 2)"
-	uci_rename twamp ${1} "${interface}_${inst}"
-}
-
-config_load twamp
-config_foreach rename_section twamp_reflector
-
-exit 0
-

wfadatad/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfadatad
-PKG_VERSION:=2.10.0.0
+PKG_VERSION:=2.8.1.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b75a1271c718e4fb2a45b5ac4fe73d192c864713
+PKG_SOURCE_VERSION:=3c3f09d319da1b71ff2ea5c92317010aebeb1bb6
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

wifimngr/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wifimngr
-PKG_VERSION:=14.2.3
+PKG_VERSION:=14.2.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f57015819a20d8d172899b1831fa29a9578011e8
+PKG_SOURCE_VERSION:=d12e9194fad6cf925ec702bb125c2e6d813db2d0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz