iopsys-econet: Take mapagent from econet-devel

Needed for netdev patch that is not delivered yet.

Signed-off-by: Bartlomiej Grzeskowiak <bartlomiej.grzeskowiak@iopsys.eu>

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,3 +1,7 @@
+if PACKAGE_libbbfdm
+
+menu "Configuration"
+
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -10,6 +14,10 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
+config BBF_TR181
+	bool "Enable TR-181 Data Model Support"
+	default y
+
 config BBF_TR104
 	bool "Enable TR-104 Data Model Support"
 	default y
@@ -20,12 +28,10 @@ config BBF_TR143
 
 config BBFDM_ENABLE_JSON_PLUGIN
 	bool "Enable json plugin to extend datamodel"
-	default y
+	default n
 
 config BBFDM_ENABLE_DOTSO_PLUGIN
 	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255
+	default n
+endmenu
+endif

bbf/Makefile

@@ -1,69 +1,41 @@
 #
-# Copyright (C) 2022 IOPSYS
+# Copyright (C) 2021 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.33
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=6.6.1
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=9bdcb1ac188c44fc2274bf01dd9dce46f572b967
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=4eff4ace6eb798c499a89252ffee1cda5aef135f
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Library for libbbfdm API
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (internal)
-  VARIANT:=internal
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  CONFLICTS := libbbfdm-mbedtls
-  VARIANT:=openssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
-  VARIANT:=wolfssl
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
 endef
 
 define Package/libbbfdm/config
@@ -85,81 +57,72 @@ define Build/Prepare
 endef
 endif
 
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
+CONFIGURE_ARGS += \
+	--enable-tr104
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
+CONFIGURE_ARGS += \
+	--enable-tr143
+endif
+
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
 
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
 ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
+CONFIGURE_ARGS += \
+	--enable-json-plugin
 endif
 
 ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += \
+	--enable-shared-library
 endif
 
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
-define Package/libbbfdm/default/install
+define Package/libbbfdm/install
 	$(INSTALL_DIR) $(1)/lib
 	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 endef
 
-define Package/libbbfdm/default/prerm
+define Package/libbbfdm/prerm
 	#!/bin/sh
 	rm -rf /etc/bbfdm/dmmap/*
 	exit 0
 endef
 
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
@@ -168,12 +131,9 @@ define Build/InstallDev
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
-	touch $(1)/usr/lib/libbbf_api.so
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
 endef
 
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))

bulkdata/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2022 iopsys Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,25 +8,20 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.5
+PKG_VERSION:=1.0.3
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_VERSION:=b35e7862bc17fc11dc1f757c7b93900995a28633
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=33a6648de9ee0af33c44518656b56b0a30b6c1ab
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
-
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
-PKG_BUILD_DEPENDS:=bbf
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -34,24 +29,21 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	BBF BulkData Collection
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
+	-D_GNU_SOURCE
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,43 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
 	option log_level '3'
 
+config profile
+	option profile_id '1'
+	option enable '0'
+	option name ''
+	option nbre_of_retained_failed_reports '0'
+	option protocol 'http'
+	option encoding_type ''
+	option reporting_interval '86400'
+	option time_reference '0'
+	option csv_encoding_field_separator ','
+	option csv_encoding_row_separator '
'
+	option csv_encoding_escape_character '"'
+	option csv_encoding_report_format 'column'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_format 'objecthierarchy'
+	option json_encoding_report_time_stamp 'unix'
+	option http_url ''
+	option http_username ''
+	option http_password ''
+	option http_compression 'none'
+	option http_method 'post'
+	option http_use_date_header '1'
+	option http_retry_enable '0'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+	option http_persist_across_reboot '0'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+

bulkdata/files/etc/init.d/bulkdatad

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+# Bulkdata Software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
 START=99
 STOP=10
@@ -7,16 +10,13 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable=$(uci -q get bulkdata.bulkdata.enable)
-
-	[ "$enable" != "1" ] && {
-		return 0
-	}
-
-	procd_open_instance
-	procd_set_param command "$PROG"
-	procd_set_param respawn "3" "7" "0"
-	procd_close_instance
+	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
+	if [ "$bulkdata_enable" = "1" ]; then
+		procd_open_instance
+		procd_set_param command "$PROG"
+		procd_set_param respawn "3" "7" "0"
+		procd_close_instance
+	fi
 }
 
 boot() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get ${config}.${default_name}_${count} >/dev/null
-		if [ $? -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata.${section}.profile_name="${profile_name}"
-	uci -q set bulkdata.${section}.profile_id=""	
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata.${section}.profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.5
+PKG_VERSION:=3.5.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c5695bc92f7f22089c9a85d3e1f4dac7c12ca900
+PKG_SOURCE_VERSION:=ef9d4c6124d0ca66f048f3d678d9a25f13aa4207
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
+	DEPENDS:= +libubox +ubus +uci +libxml2
 endef
 
 define Package/$(PKG_NAME)/description

dectmngr/files/etc/config/dect

@@ -1,3 +1,2 @@
 config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'
+	option log_dect_cmbs 'syslog'

dectmngr/files/etc/init.d/dectmngr

@@ -11,8 +11,6 @@ PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
 	pidof $NAME && killall -q $NAME
@@ -32,7 +30,7 @@ start_service() {
 
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -73,7 +71,7 @@ start_service() {
 stop_service() {
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
@@ -88,10 +86,8 @@ service_triggers()
 }
 
 boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH

dslmngr/Makefile

@@ -28,6 +28,12 @@ include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet)
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
 endef
 
 define Package/easy-qos/description
@@ -39,7 +39,11 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.6.0
+PKG_VERSION:=6.4.35
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c8c406568822b170e373a54fbf32323e960259ff
+PKG_SOURCE_VERSION:=699744d5ae9e043715c260f9b58bbc18747895f9
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -38,36 +38,26 @@ endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
-export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
@@ -97,7 +87,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_econet:ecnt_api
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
 endef
 
 define Package/libethernet/config

endptmngr/Makefile

@@ -13,12 +13,12 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=0901382048bb7ce01fc1767fef75e54692f56743
+PKG_SOURCE_VERSION:=94df920d39e8589c7ac7f5523bf372d48ef24c5e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=LICENSE
 
 export BUILD_DIR
@@ -30,7 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BRCM_SDK_VER_504021
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk

evoice/Makefile

@@ -1,107 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.29
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=ee4e9e00ec1c54b41e15a3de38f6a733634622dd
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_BUILD_DEPENDS:=bbf
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c\
-		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
-		+TARGET_iopsys_econet:kmod-voip_driver\
-		+TARGET_iopsys_econet:voip_app
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,327 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,174 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable 'voice.Network@.Enable'
-   option Registration_Server 'voice.Network@.RegistrarServer'
-   option Outbound_Proxy 'voice.Network@.ProxyServer'
-   option SIP_Port 'voice.Network@.RegistrarServerPort'
-   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
-   option T1 'voice.Network@.TimerT1'
-   option UserAgentDomain 'voice.Network@.UserAgentDomain'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,57 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option SIP_SessTmrEnable '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,28 +0,0 @@
-{
-        "G.711ALaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.711MuLaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.726": {
-                "BitRate": 32000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.729": {
-                "BitRate": 8000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        },
-        "G.722": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "20",
-                "SilenceSuppression": 0
-        }
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,28 +0,0 @@
-{
-        "G.711ALaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.711MuLaw": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.726": {
-                "BitRate": 32000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.729": {
-                "BitRate": 8000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        },
-        "G.722": {
-                "BitRate": 64000,
-                "PacketizationPeriod": "30",
-                "SilenceSuppression": 1
-        }
-}
-

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=7e013f0afa68378d38a6bdc9b0c5a342bd3dd0a5
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
@@ -38,6 +38,9 @@ define Package/$(PKG_NAME)/description
 	Command to extract sub images from FIT images.
 endef
 
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
+
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 

gryphon-led-module/Makefile

@@ -44,25 +44,13 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	MODULES_SUBDIR:=lib/modules/4.19.183
 	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
 		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

icwmp/Config_cwmp.in

@@ -0,0 +1,24 @@
+if PACKAGE_icwmp
+
+menu "Configuration"
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+endmenu
+endif
+

icwmp/Makefile

@@ -1,73 +1,52 @@
 #
-# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.0.3
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=8.2.27
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=304db5eb064d89cf4e4df0bb81fa22b88933d602
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=da88c8c28656b2db54ab205d26faccda68546c05
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  VARIANT:=openssl
+define Package/$(PKG_NAME)/description
+ A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp-openssl
-  VARIANT:=wolfssl
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  CONFLICTS := icwmp-openssl icwmp-wolfssl
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -75,29 +54,46 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/95-icwmp-generate-ssl $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
 	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
 endef
 
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
-
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+$(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -11,15 +11,15 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
+	option https_ssl_capath ''
 	option ipv6_enable '0'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
+	option interface 'eth0.1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
-	option log_to_file 'disable'
+	option log_to_file 'enable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'
@@ -32,7 +32,7 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'

icwmp/files/etc/firewall.cwmp

@@ -6,6 +6,7 @@ log() {
 }
 
 if [ ! -f "/var/state/cwmp" ]; then
+	touch "/var/state/cwmp"
 	exit 0;
 fi
 

icwmp/files/etc/icwmpd/update.sh

@@ -1,29 +1,43 @@
 #!/bin/sh
-. /lib/functions.sh
 
 log() {
-	echo "$@" |logger -t cwmp.update -p info
+	echo $@ |logger -t cwmp.update -p info
 }
 
 handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local vendorspecinf=`ifstatus ${defwan} | jsonfilter -e "@.data.vendorspecinf"`
 
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
+	log "Handling dhcp option value ${vendorspecinf}"
+	[ -n "$vendorspecinf" ] && {
+		local url=""
+		local old_url="$(uci -q get cwmp.acs.dhcp_url)"
 
-	status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
-	if [ "$status" != "running" ]; then
-		log "Trigger out of bound inform, since last inform status was failure"
-		ubus -t 10 call tr069 inform >/dev/null 2>&1
-		# Handle timeout or tr069 object not found
-		if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
-			log "Restarting icwmp tr069 object"
-			/etc/init.d/icwmpd restart
+		case $vendorspecinf in
+			http://*|https://*)
+					url="${vendorspecinf}"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo $optval | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+
+		if [ -n "$url" ]; then
+			log "## icwmp url[${old_url}] changed to [${url}]"
+			if [ "${url}" != "${old_url}" ]; then
+				log "Restarting icwmp url[${old_url}] changed to [${url}]"
+				uci -q set cwmp.acs.dhcp_url="$url"
+				uci commit cwmp
+				ubus call uci commit '{"config":"cwmp"}'
+			fi
 		fi
-	fi
+	}
 }
 
-handle_icwmp_update $@
+handle_icwmp_update

icwmp/files/etc/init.d/icwmpd

@@ -1,48 +1,20 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
+. /lib/functions.sh
+include /lib/network
+. /usr/share/libubox/jshn.sh
+
 START=99
-STOP=00
+STOP=2
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-include /lib/network
-
 log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
-
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
-
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-}
-
 enable_dhcp_option43() {
 	local wan="${1}"
 
@@ -64,213 +36,13 @@ enable_dhcp_option43() {
 	fi
 
 	newreqopts="$reqopts 43"
-	if [ "${proto}" == "dhcp" ]; then
+	if [ $proto == "dhcp" ]; then
 		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
-
-	echo "${val}"
-}
-
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
-
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
-
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ ${class_len} -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ ${class_len} -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network.$intf.sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
-				break
-			fi
-		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-enable_disable_dhcp_option125() {
-	local wan="${1}"
-	local action="${2}"
-
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local sendopts="$(uci -q get network.$wan.sendopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" == "dhcp" ]; then
-		if [ "${action}" == "enable" ]; then
-			if [ ${req125_present} -eq 0 ]; then
-				newreqopts="$reqopts 125"
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 0 ]; then
-				configure_send_op125 "${sendopts}" "${wan}" "network"
-				network_uci_update=1
-			fi
-		else
-			if [ ${req125_present} -eq 1 ]; then
-				newreqopts=$(echo ${reqopts/125/})
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 1 ]; then
-				for sopt in $sendopts; do
-					if [[ "$sopt" == "$opt125"* ]]; then
-						newsendopts=$(echo ${sendopts/"${sopt}"/})
-						uci -q set network.$wan.sendopts="$newreqopts"
-						network_uci_update=1
-						break
-					fi
-				done
-			fi
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
-	fi
-}
-
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -278,47 +50,65 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f "$resolvfile" ]; do
+	while [ ! -f $resolvfile ]; do
 		sleep 1
-		[ "$tm" -ge "$time" ] && break
+		[ $tm -ge $time ] && break
 		tm=$((tm+1))
 	done
 }
 
+set_wan_interface() {
+	local wan_interface="${1}"
+	local l3_device=""
+
+	if [ -z "${wan_interface}" ]; then
+		return 0;
+	fi
+
+	json_load "$(ifstatus ${wan_interface})"
+	json_get_var l3_device l3_device
+	if [ -n "$l3_device" ]; then
+		uci -q set cwmp.cpe.interface="${l3_device}"
+		uci -q commit cwmp
+	fi
+}
+
 copy_cwmp_etc_files_to_varstate() {
+	if [ ! -f /var/state/cwmp ]
+	then
+		if [ -f /etc/icwmpd/cwmp ]
+		then
+			uci -q -c /etc/icwmpd delete cwmp.acs
+			uci -q -c /etc/icwmpd commit cwmp
+			cp /etc/icwmpd/cwmp /var/state/cwmp
+		else
+			touch /var/state/cwmp
+		fi
+	fi
+
 	mkdir -p /var/run/icwmpd
-
-	if [ -f /etc/icwmpd/cwmp ]; then
-		uci -q -c /etc/icwmpd delete cwmp.acs
-		uci -q -c /etc/icwmpd commit cwmp
-		cp -f /etc/icwmpd/cwmp /var/state/cwmp
+	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]
+	then
+		mv /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd 2>/dev/null
 	fi
-
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
+	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]
+	then
+		mv /etc/icwmpd/dm_enabled_notify /var/run/icwmpd 2>/dev/null
 	fi
 }
 
 copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
+	if [ -f /var/state/cwmp ]
+	then
+		cp /var/state/cwmp /etc/icwmpd 2>/dev/null
 	fi
-
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
+	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]
+	then
+		cp /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd 2>/dev/null
 	fi
-
-	if [ -f /var/state/cwmp ]; then
-		cp -f /var/state/cwmp /etc/icwmpd/
-	fi
-
-	# move the successful custom notify import marker to persistent storage
-	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
-		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
+	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]
+	then
+		cp /var/run/icwmpd/dm_enabled_notify /etc/icwmpd 2>/dev/null
 	fi
 }
 
@@ -330,13 +120,12 @@ validate_acs_section()
 		'periodic_inform_interval:uinteger' \
 		'periodic_inform_time:string' \
 		'url:string' \
-		'dhcp_discovery:string' \
 		'dhcp_url:string' \
 		'compression:or("GZIP","Deflate","Disabled")' \
 		'retry_min_wait_interval:range(1, 65535)' \
 		'retry_interval_multiplier:range(1000, 65535)' \
-		'ipv6_enable:bool' \
-		'ssl_capath:string'
+		'https_ssl_capath:file' \
+		'ipv6_enable:bool'
 
 }
 
@@ -365,7 +154,6 @@ validate_cpe_section()
 }
 
 validate_defaults() {
-	local ssl_capath
 	config_load cwmp
 
 	validate_acs_section || {
@@ -373,118 +161,96 @@ validate_defaults() {
 		return 1;
 	}
 
-	ssl_capath="${ssl_capath%/}"
-	# Put the cert pem file in keep list
-	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
-			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
-		fi
-	fi
+	[ -z "${url}" -a -z "${dhcp_url}" ] && {
+		log "ACS url is empty can't start"
+		return 1;
+	}
 
 	validate_cpe_section || {
 		log "Validation of cpe section failed"
 		return 1;
 	}
 
+	[ -z "${default_wan_interface}" ] && {
+		log "Wan interface is empty"
+		return 1;
+	}
+
 	return 0;
 }
 
 boot() {
-	local dhcp_discovery="0"
+	local dhcp_url=""
+	local discovery="1"
 
 	config_load cwmp
-	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get_bool dhcp_discovery acs dhcp_discovery 1
+	config_get dhcp_url acs dhcp_url ""
 
-	config_get wan_interface cpe default_wan_interface "wan"
-	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
+	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
+		if [ -z "${dhcp_url}" ]; then
+			log "dhcp discovery enabled but no dhcp url, trigger update"
+			/etc/icwmpd/update.sh
+		fi
 	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_disable_dhcp_option125 "${wan_interface}" "enable"
-		enable_dnsmasq_option125 "${lan_interface}"
-	else
-		# Remove dhcp option 125 if exists
-		enable_disable_dhcp_option125 "${wan_interface}" "disable"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
 	start
 }
 
 start_service() {
 	local enable_cwmp
+	local wan_interface
+	local dhcp_discovery
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
+	config_get dhcp_discovery acs dhcp_discovery
+	config_get wan_interface cpe default_wan_interface "wan"
 
-	if [ "$enable_cwmp" = "0" ]; then
+	if [ "$enable_cwmp" = "0" -o "$enable_cwmp" = "false" ]; then
+		log "CWMP is not enabled"
 		return 0
 	fi
 
+	# Set wan interface if not configured
+	set_wan_interface "${wan_interface}"
+
+	# Set dhcp option 43 if dhcp discovery enabled
+	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
+		enable_dhcp_option43 "${wan_interface}"
+	fi
+
 	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
 	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
 	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
 
+	# Copy backup data so that if it restart latter on it gets the info
+	copy_cwmp_etc_files_to_varstate
+
 	validate_defaults || {
 		log "Validation of defaults failed"
 		return 1;
 	}
 
-	# Copy backup data so that if it restart latter on it gets the info
-	copy_cwmp_etc_files_to_varstate
-
 	procd_open_instance icwmp
 	procd_set_param command "$PROG"
 	procd_append_param command -b
 	procd_set_param respawn \
-		"${respawn_threshold:-5}" \
-		"${respawn_timeout:-10}" "${respawn_retry:-3}"
+		${respawn_threshold:-5} \
+		${respawn_timeout:-10} ${respawn_retry:-3}
 
 	procd_set_param watch network.interface
 	procd_close_instance
 }
 
-service_stopped()
+stop_service()
 {
 	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	status="$(ubus -t 1 call tr069 status |jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
-		log "Restarting CWMP client"
-		stop
-		start
-	fi
+	log "Restarting CWMP client"
+	stop
+	start
 }
 
 service_triggers() {

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,11 +1,7 @@
-#!/bin/sh
-
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
 # Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
+oui=$(uci -q get cwmp.cpe.manufacturer_oui)
 if [ -z "${oui}" ]; then
 	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
 fi
@@ -13,29 +9,24 @@ fi
 oui=$(echo "${oui}" | tr 'a-f' 'A-F')
 
 # Get system serial number.
-config_get serial cpe serial_number ""
+serial=$(uci -q get cwmp.cpe.serial_number)
 if [ -z "${serial}" ]; then
 	serial=$(db -q get device.deviceinfo.SerialNumber)
 fi
 
 # Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
 
 # Only set if they are empty
-if [ -z "${acs_userid}" ]; then
+if [ -z "$acs_userid" ]
+then
     uci -q set cwmp.acs.userid="${oui}-${serial}"
 fi
 
-if [ -z "${cpe_userid}" ]; then
+if [ -z "$cpe_userid" ]
+then
     uci -q set cwmp.cpe.userid="${oui}-${serial}"
 fi
 
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
-fi
-
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/95-icwmp-generate-ssl

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+regenerate_ssl_link(){
+	[ ! -d "/etc/ssl/certs" ] && return 0;
+	[ ! -f "/etc/ssl/certs/*.pem" ] && return 0;
+
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
 /var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp

ieee1905/Config.map-plugin.in

@@ -1,14 +0,0 @@
-if (PACKAGE_map-plugin)
-
-menu "Configurations"
-
-config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-	bool "Sync configuration between dynamic controllers in the network"
-	default n
-
-config MULTIAP_FUZZ_1905_CMDUS
-	bool "Include support to fuzz 1905 CMDUs for testing purpose"
-	default n
-
-endmenu
-endif

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.10.7
+PKG_VERSION:=4.6.10
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b50f79061a95840d89a6129aa0a95aff82b5a1b7
+PKG_SOURCE_VERSION:=67412a55087a932a2127a062faf9183d2848b940
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -57,10 +57,6 @@ $(call Package/ieee1905/Default,$(1))
 	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
 endef
 
-define Package/map-plugin/config
-  source "$(SOURCE)/Config.map-plugin.in"
-endef
-
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
 endef
@@ -70,7 +66,6 @@ define Package/libieee1905/description
 endef
 
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
@@ -79,11 +74,6 @@ ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
 TARGET_CFLAGS += -DHAS_WIFI
 endif
 
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-
 MAKE_PATH:=src
 
 

ieee1905/files/etc/config/ieee1905

@@ -2,31 +2,21 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	option registrar '2 5 6'
-#	option macaddress '0a:1b:2c:3d:4e:50'
+	option registrar '2 5'
 
-config al-iface
-	option enabled '1'
-	option ifname 'br-lan'
-	option type 'bridge'
-
-# ap sections are auto-generated/overwritten during onboarding
-#
 config ap
 	option band '2'
-	option ssid 'IOWRT-2.4GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.2'
+	option encryption 'psk2'
+	option key '5555500000'
 
 config ap
 	option band '5'
-	option ssid 'IOWRT-5GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.5'
+	option encryption 'psk2'
+	option key '2222200000'
 
+config al-iface
+	option enabled 1
+	option ifname 'br-lan'
+	option type 'bridge'

ieee1905/files/etc/init.d/ieee1905

@@ -42,7 +42,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
+			'band:or("2", "5", "60")' \
 			'ssid:string' \
 			'encryption:or("psk2", "sae-mixed", "sae", string)' \
 			'key:string' \

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.2.2
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/Config.in

@@ -1,7 +0,0 @@
-config TARGET_VERSION
-	string
-	prompt "Software Version"
-
-config TARGET_CUSTOMER
-	string
-	prompt "Customer ID"

iop/Makefile

@@ -24,10 +24,6 @@ define Package/iop/description
 	This package contains iopsysWrt SDK utilities
 endef
 
-define Package/iop/config
-	source "$(SOURCE)/Config.in"
-endef
-
 define Build/Compile
 	true
 endef

iop/config

@@ -50,9 +50,8 @@ CONFIG_PACKAGE_wifimngr=y
 
 # Multi-AP #
 CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-agent=m
-CONFIG_PACKAGE_map-controller=m
 CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_wfadatad=y
 CONFIG_PACKAGE_wfadatad-collector=y
 
 # Network #
@@ -66,16 +65,15 @@ CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rulengd=y
 
 # TR-x69 #
-CONFIG_PACKAGE_uspd-mbedtls=y
-CONFIG_PACKAGE_icwmp-mbedtls=y
+CONFIG_PACKAGE_uspd=y
+CONFIG_PACKAGE_icwmp=y
 CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_stunc-mbedtls=m
+CONFIG_PACKAGE_stunc=m
 CONFIG_PACKAGE_swmodd=m
 CONFIG_PACKAGE_twamp=m
-CONFIG_PACKAGE_udpecho-client=m
-CONFIG_PACKAGE_udpecho-server=m
+CONFIG_PACKAGE_udpechoserver=m
 CONFIG_PACKAGE_xmppc=m
 
 # WebGUI #
@@ -117,10 +115,10 @@ CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_atftp=m
 CONFIG_PACKAGE_atftpd=m
 CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_dnsmasq=y
-CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
+CONFIG_PACKAGE_mwan3=y
 CONFIG_PACKAGE_nginx=y
 CONFIG_PACKAGE_openvpn-easy-rsa=y
 CONFIG_PACKAGE_openvpn-openssl=y
@@ -136,11 +134,10 @@ CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
 CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_ip-bridge=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables-legacy=y
+CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
@@ -165,7 +162,6 @@ CONFIG_PACKAGE_lscpu=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_procd-ujail=m
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rpcd-mod-rrdns=y
@@ -289,10 +285,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-
-# Use fw3 iptables-based instead of newer nftables-based fw4
-# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
-# Enabling luci-app-firewall enables fw4
-# CONFIG_PACKAGE_luci-app-firewall is not set
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set

iop/scripts/feeds_update.sh

@@ -2,65 +2,58 @@
 
 function feeds_update {
 
-	developer=0
-	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
-		case $opt in
-		n)
-			override=0
-			;;
-		esac
-	done
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
-	fi
+    cp .config .genconfig_config_bak
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
 	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-	fi
+    fi
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
+    # targets need to be installed explicitly
+    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek iopsys-econet"
+    for target in $targets
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# Workaround for bug in 22.03.0-rc4 where installed target path has been
-	# moved to target/linux/feeds but Config.in and Makefile from installed
-	# targets are not properly included from the new location.
-	# This hack is to be removed once the issues are fixed.
-	# Note that the above block of code might no longer necessary because
-	# targets no longer need to be installed explicitly.
-	echo "Working around installed-target-bug"
-	for f in target/linux/feeds/*; do
-		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
-	done
+    # install all packages
+    ./scripts/feeds install -a
 
-	# install all packages
-	./scripts/feeds install -a
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	cp .genconfig_config_bak .config
-	make defconfig
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap
-
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -13,12 +13,11 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
-	ramips="target/linux/feeds/iopsys-ramips"
-	econet="target/linux/feeds/iopsys-econet"
-	x86="target/linux/feeds/iopsys-x86"
-	armvirt="target/linux/feeds/iopsys-armvirt"
-	mediatek="target/linux/feeds/iopsys-mediatek"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -84,8 +83,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -118,11 +117,9 @@ function genconfig {
 			iopsys_x86=$(cd $x86; ./genconfig)
 		[ -e $armvirt/genconfig ] &&
 			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -170,14 +167,6 @@ function genconfig {
 		    return
 		fi
 	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -330,25 +319,19 @@ function genconfig {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES 
-		case "$target" in
-		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 

iop/scripts/genconfig_min.sh

@@ -12,12 +12,11 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
-	ramips="target/linux/feeds/iopsys-ramips"
-	econet="target/linux/feeds/iopsys-econet"
-	x86="target/linux/feeds/iopsys-x86"
-	armvirt="target/linux/feeds/iopsys-armvirt"
-	mediatek="target/linux/feeds/iopsys-mediatek"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -83,8 +82,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -117,11 +116,9 @@ function genconfig_min {
 			iopsys_x86=$(cd $x86; ./genconfig)
 		[ -e $armvirt/genconfig ] &&
 			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -169,14 +166,6 @@ function genconfig_min {
 		    return
 		fi
 	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -321,25 +310,19 @@ function genconfig_min {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 

iop/scripts/iopupgrade.sh

@@ -1,282 +1,344 @@
 # this is a developer helper script to install firmware on a remote host with SSH
 
 function upd_usage {
-	echo "usage: $0 ssh_upgrade [-t <host>] [-f <file>] [opts] "
-	echo ""
-	echo "   Default host is 192.168.1.1"
-	echo "   Default firmware file is the latest one (last.{itb,pkgtb})"
-	echo "   Default is to not keep configuration"
-	echo "opts:"
-	echo ""
-	echo "	-i	Interactive use, allows to select firmware file"
-	echo "	-n	Do not do the final reboot of the target board"
-	echo "	-c	Keep configuration"
-	echo "	-x	Force install even if firmware is not for this board"
-	echo "	-b	Force install of bootloader regardless of version installed"
+    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
+    echo ""
+    echo "   Default host is 192.168.1.1"
+    echo "   Default firmware file is the newest one found"
+    echo "   Default is to not keep configuration"
+    echo "opts:"
+    echo ""
+    echo "	-i	Interactive use, Allows to select firmware file"
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
 }
 
 function set_config_string {
-	eval $(grep $1 .config)
+    eval `grep $1 .config`
 }
 
 function upd_ask_ok {
-	echo "Will continue with the following settings:"
-	echo "-----------------------------------------"
-	printf "%20s: %s\n" "Firmware file" "$upd_fw_base"
-	printf "%20s: %s\n" "Host IP" "$upd_host"
-	printf "%20s: " "Reboot"
-	if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Keep config"
-	if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force bootloader"
-	if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force image upgrade"
-	if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	echo "-----------------------------------------"
+    echo "Will Continue with the following settings"
+    echo "-----------------------------------------"
+    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
+    printf "%20s: %s\n"  "Host ip" "$upd_host"
+    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    echo "-----------------------------------------"
 
-	echo -n "Continue? [Y/n/q]:"
-	read answer
+    if [ "$upd_sysupgrade" == "0" ]
+       then
+	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
+    fi
 
-	case $answer in
-	n | N)
-		return 1
-		;;
-	q | Q)
-		exit 1
-		;;
-	y | Y | *)
-		return 0
-		;;
-	esac
+    echo -n "Continue? [Y/n/q]:"
+    read answer
+
+    case $answer in
+	n|N)
+	    return 1;;
+	q|Q)
+	    exit 1;;
+	y|Y|*)
+	    return 0;;
+    esac
 }
 
 function upd_select_file {
-	dialog --keep-tite --title "To select a file, use TAB/ARROW to highlight then press SPACEBAR -> RETURN" \
-		--fselect "${upd_fw:-bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/}" \
-		$((lines - 10)) $((cols - 5)) \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_fw="$new_file"
-		upd_fw_base=$(basename $upd_fw)
-	fi
+    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
+	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
+	   $((lines -10)) $((cols -5)) \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_fw="$new_file"
+	upd_fw_base=$(basename $upd_fw);
+    fi
 }
 
 function upd_select_target {
-	dialog --keep-tite --title "Input the hostname/IP of the target board" \
-		--inputbox "Name/IP" \
-		$((lines - 10)) $((cols - 5)) \
-		"$upd_host" \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_host="$new_file"
-	fi
+    dialog --keep-tite --title "Input the name/ip number of target board" \
+	   --inputbox "Name/IP" \
+	   $((lines -10)) $((cols -5)) \
+	   "$upd_host" \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_host="$new_file"
+    fi
 }
 
-function upd_select_reboot {
-	dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Reboot" "Restart board after done" $(if [ "$upd_noreboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		"No reboot" "Continue running old system" $(if [ "$upd_noreboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+function upd_select_reboot {
+    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
 	"No reboot")
-		upd_noreboot=1
-		;;
+	    upd_noreboot=1
+	;;
 	"Reboot")
-		upd_noreboot=0
-		;;
-	esac
+	    upd_noreboot=0
+	    ;;
+    esac
 }
 
 function upd_select_config {
-	dialog --keep-tite --radiolist "Should the configuration be kept" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Keep" "Keep the config from old system" $(if [ "$upd_keepconf" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Default" "Use default config for new system" $(if [ "$upd_keepconf" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the configuration be keept" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Keep")
-		upd_keepconf=1
-		;;
+	    upd_keepconf=1
+	    ;;
 	"Default")
-		upd_keepconf=0
-		;;
-	esac
+	    upd_keepconf=0
+	    ;;
+    esac
 }
 
 function upd_select_forceboot {
-	dialog --keep-tite --radiolist "Should the boot loader be updated regardless of the version installed" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Always update boot loader" $(if [ "$upd_forceboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Version check" "Only upgrade if version is newer" $(if [ "$upd_forceboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceboot=1
-		;;
+	    upd_forceboot=1
+	    ;;
 	"Version check")
-		upd_forceboot=0
-		;;
-	esac
+	    upd_forceboot=0
+	    ;;
+    esac
 }
 
 function upd_select_forceimage {
-	dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Disable sanity check and force use of image (dangerous)" $(if [ "$upd_forceimage" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Only compatible" "Normal checks apply" $(if [ "$upd_forceimage" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceimage=1
-		;;
+	    upd_forceimage=1
+	    ;;
 	"Only compatible")
-		upd_forceimage=0
-		;;
-	esac
+	    upd_forceimage=0
+	    ;;
+    esac
+}
+
+function upd_select_sysupgrade {
+    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
+	"iopu")
+	    upd_sysupgrade=0
+	    ;;
+	"sysupgrade")
+	    upd_sysupgrade=1
+	    ;;
+    esac
 }
 
 function upd_select {
-	dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select item to change" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Firmware file" "$upd_fw_base" \
-		"Host IP" "$upd_host" \
-		"Reboot" $(if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Keep config" $(if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force bootloader" $(if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force image upgrade" $(if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		2>$tempfile
 
-	case $(cat $tempfile) in
-	"Firmware file")
-		upd_select_file
-		;;
-	"Host IP")
-		upd_select_target
-		;;
+    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Firmare file" "$upd_fw_base"\
+	   "Host ip" "$upd_host" \
+	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   2> $tempfile
+
+
+    case $(cat $tempfile) in
+	"Firmare file")
+	    upd_select_file
+	    ;;
+	"Host ip")
+	    upd_select_target
+	    ;;
 	"Reboot")
-		upd_select_reboot
-		;;
+	    upd_select_reboot
+	    ;;
 	"Keep config")
-		upd_select_config
-		;;
+	    upd_select_config
+	    ;;
 	"Force bootloader")
-		upd_select_forceboot
-		;;
+	    upd_select_forceboot
+	    ;;
 	"Force image upgrade")
-		upd_select_forceimage
-		;;
+	    upd_select_forceimage
+	    ;;
+	"sysupgrade")
+	    upd_select_sysupgrade
+	    ;;
 	*)
-		return
-		;;
-	esac
-	upd_select
+	    return
+	;;
+    esac
+    upd_select
 }
 function upd_select_start {
-	lines=$(tput lines)
-	cols=$(tput cols)
-	tempfile="$(mktemp)"
-	trap "rm -f $tempfile" 0 1 2 5 15
-	upd_select
+    lines=$(tput lines)
+    cols=$(tput cols)
+    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
+    trap "rm -f $tempfile" 0 1 2 5 15
+    upd_select
 
 }
 
 function ssh_upgrade {
-	upd_noreboot=0
-	upd_forceboot=0
-	upd_keepconf=0
-	upd_forceimage=0
-	upd_fw_base=""
-	upd_fw=""
-	upd_host="192.168.1.1"
-	do_dialog=0
+    upd_noreboot=0
+    upd_forceboot=0
+    upd_keepconf=0
+    upd_forceimage=0
+    upd_fw_base=""
+    upd_fw=""
+    upd_host="192.168.1.1"
+    upd_sysupgrade=1
+    do_dialog=0
 
-	while getopts "f:hnxt:icb" opt; do
-		case $opt in
-		n)
-			upd_noreboot=1
-			;;
-		x)
-			upd_forceimage=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		c)
-			upd_keepconf=1
-			;;
-		v)
-			verbose=$OPTARG
-			;;
-		f)
-			upd_fw=$OPTARG
-			;;
-		t)
-			upd_host=$OPTARG
-			;;
-		i)
-			do_dialog=1
-			;;
-		h)
-			upd_usage
-			exit 1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-		esac
-	done
-
-	if [ -z "$upd_fw" ]; then
-		set_config_string CONFIG_TARGET_BOARD
-		set_config_string CONFIG_TARGET_SUBTARGET
-		upd_fw="$(realpath -q --canonicalize-existing --relative-to=. "bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/"last.{pkgtb,itb})"
-		if [ -z "$upd_fw" ] && [ $do_dialog -eq 0 ]; then
-			echo "Could not find image. Check that last.{itb,pkgtb} exists or specify an image using -f <image> or -i (interactive)." >&2
-			return 1
-		fi
-	fi
-	upd_fw_base="$(basename "$upd_fw")"
-
-	[ $do_dialog -eq 1 ] && upd_select_start
-
-	if ! upd_ask_ok; then
-		upd_select_start
-		if ! upd_ask_ok; then
-			exit 1
-		fi
-	fi
-
-	if [ ! -f $upd_fw ]; then
-		echo "Firmware file $firmware does not exist."
+    while getopts "f:hnxt:iscb" opt; do
+	case $opt in
+	    n)
+		upd_noreboot=1
+		;;
+	    x)
+		upd_forceimage=1
+		;;
+	    b)
+		upd_forceboot=1
+		;;
+	    c)
+		upd_keepconf=1
+		;;
+	    v)
+		verbose=$OPTARG
+		;;
+	    f)
+		upd_fw=$OPTARG
+		;;
+	    t)
+		upd_host=$OPTARG
+		;;
+	    i)
+		do_dialog=1
+		;;
+	    s)
+		upd_sysupgrade=1
+		;;
+	    h)
+		upd_usage
 		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -n "$upd_fw" ]
+    then
+	upd_fw_base=$(basename $upd_fw);
+    else
+	set_config_string CONFIG_TARGET_BOARD
+	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
+
+	# if target uses pkgtb
+	if [ -z "$firmwares"]
+	then
+	    # pkgtb files can not be streamed so copy over the file witch scp
+	    use_scp=1
+	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
 	fi
 
-	extra_args=""
-	[ $upd_noreboot -eq 1 ] && extra_args="$extra_args --no-reboot"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args --force"
-	[ $upd_keepconf -eq 0 ] && extra_args="$extra_args -n"
-	[ $upd_forceboot -eq 1 ] && extra_args="$extra_args --force-loader-upgrade"
+	for upd_fw_base in $firmwares
+	do
+	    #echo "firmware $upd_fw"
+	    break
+	done
+	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
+    fi
 
-	pv "$upd_fw" |
-		ssh \
-			-o ConnectTimeout=60 \
-			root@"$upd_host" \
-			sh -c "cat > '/tmp/$upd_fw_base' && (set -x && sysupgrade -v $extra_args /tmp/$upd_fw_base)" ||
-		echo "Sysupgrade failed" >&2 && return 1
+    [ $do_dialog -eq 1 ] && upd_select_start
+
+    if ! upd_ask_ok
+    then
+	upd_select_start
+	if ! upd_ask_ok
+	then
+	    exit 1
+	fi
+    fi
+
+    if [ ! -f $upd_fw ]
+    then
+	echo "firmware file $firmware do not exist"
+	exit 1
+    fi
+
+    if [ $upd_sysupgrade -eq 0 ]
+    then
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
+	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
+	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
+
+	file_size_kb=`du -k "$upd_fw" | cut -f1`
+	if [ "$use_scp" == "1" ]
+	then
+	    scp $upd_fw root@$upd_host:/tmp/ &&
+		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
+	else
+	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
+	fi
+    else
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
+	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
+
+	scp $upd_fw root@$upd_host:/tmp/ &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    echo "sysupgrade done!"
+    fi
 }
 
 register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
+
+

libmicroxml/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libmicroxml
+PKG_VERSION:=2012-06-11
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mirror/microxml.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_LICENSE:=LGPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libmicroxml
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=XML library
+  MAINTAINER:=Luka Perkov <luka@openwrt.org>
+endef
+
+define Package/libmicroxml/description
+ A micro sized XML library
+endef
+
+CONFIGURE_ARGS += \
+	--disable-threads \
+	--enable-static \
+	--enable-shared
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
+endef
+
+define Package/libmicroxml/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -0,0 +1,130 @@
+diff --git a/mxml-file.c b/mxml-file.c
+index 02eca9d..f10d202 100644
+--- a/mxml-file.c
++++ b/mxml-file.c
+@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
+   * Write the node...
+   */
+ 
+-  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
++  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
++    global_free(global);
+     return (-1);
+-
++  }
++  
++  global_free(global);
+   if (col > 0)
+     if (putc('\n', fp) < 0)
+       return (-1);
+@@ -1448,6 +1451,7 @@ mxml_load_data(
+   if ((buffer = malloc(64)) == NULL)
+   {
+     mxml_error("Unable to allocate string buffer!");
++    global_free(global);
+     return (NULL);
+   }
+ 
+@@ -2083,11 +2087,12 @@ mxml_load_data(
+ 		 node->parent ? node->parent->value.element.name : "(null)");
+ 
+       mxmlDelete(first);
+-
++      global_free(global);
+       return (NULL);
+     }
+   }
+ 
++  global_free(global);
+   if (parent)
+     return (parent);
+   else
+@@ -2102,7 +2107,7 @@ error:
+   mxmlDelete(first);
+ 
+   free(buffer);
+-
++  global_free(global);
+   return (NULL);
+ }
+ 
+diff --git a/mxml-private.c b/mxml-private.c
+index 4378ca3..ea6e452 100644
+--- a/mxml-private.c
++++ b/mxml-private.c
+@@ -41,6 +41,32 @@
+  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
+  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
+  */
++void *global_mem[16] = {0};
++
++static void *global_calloc(int x, int size)
++{
++  int i;
++  void *m = calloc(x, size);
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
++    global_mem[i] = global_mem[i-1];
++  }
++  global_mem[0] = m;
++  return m;
++}
++
++void global_free(void *m)
++{
++  int i;
++  if (m == NULL)
++    return;
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
++    if (global_mem[i] == m) {
++      global_mem[i] = NULL;
++      free(m);
++      break;
++    }
++  }
++}
+ 
+ #if defined(__sun) || defined(_AIX)
+ #  pragma fini(_mxml_fini)
+@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
+   return (MXML_REAL);
+ }
+ 
+-
+ #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
+ #  include <pthread.h>
+ 
+@@ -190,7 +215,6 @@ _MXML_FINI(void)
+   }
+ }
+ 
+-
+ /*
+  * '_mxml_global()' - Get global data.
+  */
+@@ -205,7 +229,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+     pthread_setspecific(_mxml_key, global);
+ 
+     global->num_entity_cbs = 1;
+@@ -288,7 +312,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+ 
+     global->num_entity_cbs = 1;
+     global->entity_cbs[0]  = _mxml_entity_cb;
+diff --git a/mxml-private.h b/mxml-private.h
+index c591208..72ed338 100644
+--- a/mxml-private.h
++++ b/mxml-private.h
+@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
+ extern _mxml_global_t	*_mxml_global(void);
+ extern int		_mxml_entity_cb(const char *name);
+ 
++extern void global_free(void *m);

libtrace/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libtrace
-PKG_VERSION:=3.0.23
+PKG_VERSION:=3.0.22
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
@@ -72,11 +72,11 @@ endef
 
 define Package/libtrace/install    
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libtrace.so.* $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libwandio.so.* $(1)/usr/lib/
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.so.* $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libtrace.so.* $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libwandio.so.* $(1)/usr/lib/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.so.* $(1)/usr/lib/
 	$(INSTALL_DIR) $(1)/usr/lib/libpacketdump
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump/*.so* $(1)/usr/lib/libpacketdump/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump/*.so* $(1)/usr/lib/libpacketdump/
 endef
 
 define Package/libtrace-tools/install    

map-agent/Config.in

@@ -1,34 +0,0 @@
-if (PACKAGE_map-agent)
-
-menu "Configurations"
-
-config AGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-config AGENT_ISLAND_PREVENTION
-	bool "Support Island Prevention"
-	default y if MULTIAP_AGENT_ISLAND_PREVENTION
-
-config AGENT_EASYMESH_R2_CERT
-	bool "Compile for WFA test bed"
-
-
-config AGENT_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through AGENT_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-agent/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-21 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.10.3.14
+PKG_VERSION:=7.1.4
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=449eb907b121b7224cbfedcf51246e438f2b30d6
+PKG_SOURCE_VERSION:=econet-devel
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
@@ -50,32 +50,14 @@ define Package/dynbhd/description
 endef
 
 define Package/map-agent/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-Wno-error=deprecated-declarations \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DAGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
-ifeq ($(CONFIG_AGENT_ISLAND_PREVENTION),y)
-TARGET_CFLAGS += -DAGENT_ISLAND_PREVENTION
-endif
-
-ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
-TARGET_CFLAGS += -DEASYMESH_R2_CERT
-endif
-
-ifeq ($(CONFIG_AGENT_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_AGENT_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 MAKE_PATH:=src
 
 define Package/map-agent/install
@@ -83,8 +65,6 @@ define Package/map-agent/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/script/* $(1)/lib/wifi/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef
 

map-agent/files/etc/config/mapagent

@@ -1,132 +1,34 @@
 config agent 'agent'
 	option enabled '1'
-	option debug '0'
+	option debug '6'
 	option profile '2'
 	option al_bridge 'br-lan'
-	option netdev 'wlan'
-	option island_prevention '0'
-	option eth_onboards_wifi_bhs '0'
-#	option controller_macaddr '0a:1b:2c:3d:4e:50'
 
-config dynamic_backhaul
-	option missing_bh_timer '60'
-	option missing_bh_reconfig_timer '1800'
-
-config controller_select
-	option id 'auto'
-	option probe_int '20'
-	option retry_int '9'
-	option autostart '1'
-	option local '0'
-
-config radio
-	option device 'phy0'
-	option band '2'
-# options below are auto-generated during onboarding
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '70'
-#	option report_rcpi_threshold '80'
-#	option rcpi_hysteresis_margin '0'
-#	option report_util_threshold '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
-
-config radio
-	option device 'phy1'
-	option band '5'
-# options below are auto-generated during onboarding
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '86'
-#	option report_rcpi_threshold '96'
-#	option rcpi_hysteresis_margin '0'
-#	option report_util_threshold '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
-
-config bsta
-	option enabled '1'
-	option ifname 'wlan0'
-	option band '2'
-	option device 'phy0'
-	option priority '2'
-# options below are auto-generated during onboarding
-#	option ssid 'MAP-BH-2.4GHz'
-#	option encryption 'sae-mixed'
-#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
-#	option onboarded '1'
-#	option bssid '0a:1b:2c:3d:4e:53'
-#	option vid '1'
-
-config bsta
-	option enabled '1'
-	option ifname 'wlan1'
-	option band '5'
-	option device 'phy1'
-	option priority '0'
-# options below are auto-generated during onboarding
-#	option ssid 'MAP-BH-5GHz'
-#	option encryption 'sae-mixed'
-#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
-#	option onboarded '1'
-#	option bssid '0a:1b:2c:3d:4e:54'
-#	option vid '1'
-
-# ap sections and policy section are
-# auto-generated during onboarding
-#
 #config ap
-#	option enabled '1'
-#	option ifname 'wlan0-1'
+#	option ifname 'wl0'
+#	option steer 'rssi bssload'
+#	list exclude '00:11:22:33:44:55'
+#	list exclude_btm '00:aa:bb:cc:dd:ee'
+#	list assoc_ctrl '00:10:20:30:40:50'
+#	option btm_retry '3'
+#	option btm_retry_secs '180'
+#	option fallback_legacy '1'
+#	option steer_legacy_reassoc_secs '30'
+#	option steer_legacy_retry_secs '3600'
+#	option assoc_ctrl_secs '30'
 #	option band '2'
-#	option device 'phy0'
 #	option type 'fronthaul'
-#	option ssid 'IOWRT-2.4GHz'
-#	option encryption 'sae-mixed+aes'
-#	option key '1234567890'
-#	option vid '1'
 
 #config ap
-#	option enabled '1'
-#	option ifname 'wlan0-2'
-#	option band '2'
-#	option device 'phy0'
-#	option type 'backhaul'
-#	option ssid 'MAP-BH-2.4GHz'
-#	option encryption 'sae+aes'
-#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
-#	option disallow_bsta '0'
-#	option vid '1'
-
-#config ap
-#	option enabled '1'
-#	option ifname 'wlan1-1'
+#	option ifname 'wl1'
+#	option steer 'rssi bssload'
+#	list exclude '00:11:22:33:44:55'
+#	list exclude_btm '00:aa:bb:cc:dd:ee'
 #	option band '5'
-#	option device 'phy1'
 #	option type 'fronthaul'
-#	option ssid 'IOWRT-5GHz'
-#	option encryption 'sae-mixed+aes'
-#	option key '1234567890'
-#	option vid '1'
 
-#config ap
+#config bsta
+#	option ifname 'apclii0'
 #	option enabled '1'
-#	option ifname 'wlan1-2'
-#	option band '5'
-#	option device 'phy1'
-#	option type 'backhaul'
-#	option ssid 'MAP-BH-5GHz'
-#	option encryption 'sae+aes'
-#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
-#	option disallow_bsta '0'
-#	option vid '1'
-
-#config policy
-#	option report_interval '0'
-#	option pvid '1'
-#	option pcp_default '0'
-#	option report_scan '0'
-#	option report_sta_assocfails '0'
-#	option report_sta_assocfails_rate '0'
-
+#	option onboarded '0'
+#	option disallow_bsta '1		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -1,78 +1,22 @@
 #!/bin/sh
 
-. /lib/network/utils.sh
+wan=$(db -q get hw.board.ethernetWanPort)
+MAPFILE="/tmp/multiap.backhaul"
 
-conn_ports_file="/tmp/map.connected.ports"
-map_bh_file="/tmp/multiap.backhaul"
-al_bridge="$(uci -q get mapagent.agent.al_bridge)"
-[ "${al_bridge:0:3}" = "br-" ] || exit 0
-al_brnet="${al_bridge:3}"
 
-# Exit if the PORT is not member of the AL Bridge
-[ "$(get_network_of $PORT)" = "$al_brnet" ] || exit 0
-
-############## Dynamic Backhaul Daemon ##############
-if [ -n "$(which dynbhd)" ]; then
-	pidof dynbhd >/dev/null && exit 0 # dynbhd is managing the links
-
-	if [ ! -f $conn_ports_file ]; then
-		touch $conn_ports_file
-		if [ "$LINK" = "up" ]; then
-			touch $conn_ports_file
-			echo "$PORT" > $conn_ports_file
-			brctl delif $al_bridge $PORT
-			#ubus call network.interface.lan remove_device "{\"name\":\"$PORT\"}"
-		fi
-	else
-		if [ "$LINK" = "up" ]; then
-			brctl delif $al_bridge $PORT
-			echo "$PORT" >> $conn_ports_file
-			#ubus call network.interface.lan remove_device "{\"name\":\"$PORT\"}"
-		else
-			sed -i -E "/(^|:)${PORT}(:|$)/d" $conn_ports_file
-			#ubus call network.interface.lan add_device "{\"name\":\"$PORT\"}"
-			brctl addif $al_bridge $PORT
-			[ "$(cat $conn_ports_file | wc -c)" = "0" ] && rm -f $conn_ports_file
-		fi
-	fi
-
-	exit 0
-fi
-########################################################
-
-################ Dedicated ETH WAN Port ################
-wanport="$(db -q get hw.board.ethernetWanPort)"
-if [ -n "$wanport" ]; then
-	[ "$wanport" = "$PORT" ] || exit 0
-########################################################
-else
-#################### DHCP Discovery ####################
-	[ "$(uci -q get network.${al_brnet}.proto)" == "dhcp" ] || exit 0
-
-	if [ "$LINK" = "up" ]; then
-		brctl delif $al_bridge $PORT
-
-		udhcpc -qnRoC -i $PORT >/dev/null 2>&1 && dhcp=1
-
-		brctl addif $al_bridge $PORT
-
-		[ $dhcp -eq 1 ] || exit 0
-	else
-		[ -f $map_bh_file ] || exit 0
-		cur_bh="$(cat $map_bh_file  | jsonfilter -e @.ifname)"
-		[ "$cur_bh" = "$PORT" ] || exit 0
-	fi
-########################################################
-fi
+[ -z "$wan" ] && exit 1 # no configuration
+[ "$PORT" != "$wan" ] && exit 0
 
 remove_from_bridge() {
 	config_get ifname "$section" ifname
-	[ -n "$ifname" ] && ubus call network.interface.${al_brnet} remove_device '{"name":"$ifname"}'
+
+	ubus call network.interface.$bridge remove_device '{"name":"$ifname"}'
 }
 
 update_bstas() {
-	section="$1"
-	action="$2"
+	local section="$1"
+	local action="$2"
+	local ifname onboarded
 
 	config_get ifname "$section" ifname
 	config_get_bool enabled "$section" enabled 0
@@ -90,16 +34,16 @@ update_bstas() {
 }
 
 if [ "$LINK" = "up" ]; then
-	#touch "$map_bh_file"
+	#touch "$MAPFILE"
+
 	config_load "mapagent"
-	config_foreach remove_from_bridge bsta
+	bridge=$(uci get mapagent.agent.al_bridge | cut -d '-' -f2)
+	config_foreach remove_from_bridge bsta $bridge
 	config_foreach update_bstas bsta down
 
 	/lib/wifi/multiap set_uplink "eth" "$PORT"
 else
-	/lib/wifi/multiap unset_uplink "eth"
-	#rm -f "$map_bh_file"
+	rm -f "$MAPFILE"
 	config_load "mapagent"
 	config_foreach update_bstas bsta up
-
 fi

map-agent/files/etc/init.d/mapagent

@@ -59,7 +59,7 @@ remove_map() {
 }
 
 start_dynbhd_service() {
-	rm -f /tmp/multiap.backhaul
+	rm -f /tmp/map.agent.bsta_global_disable
 	procd_open_instance
 	procd_set_param command "/usr/sbin/dynbhd"
 	procd_set_param respawn
@@ -79,10 +79,7 @@ validate_agent_section() {
 		'netdev:string' \
 		'vlan_segregation:bool:false' \
 		'resend_num:uinteger:0' \
-		'dyn_cntlr_sync:bool:true' \
-		'island_prevention:bool:false' \
-		'eth_onboards_wifi_bhs:bool:false'
-
+		'dyn_cntlr_sync:bool:true'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of agent section failed"
@@ -116,7 +113,7 @@ validate_ap_section() {
 	uci_validate_section mapagent $section "${1}" \
 			'ifname:string' \
 			'device:string' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'enabled:bool:true' \
 			'onboarded:bool:false' \
 			'ssid:string' \
@@ -142,15 +139,14 @@ validate_radio_section() {
 			'configured:bool:false' \
 			'onboarded:bool:false' \
 			'dedicated_backhaul:bool:false' \
-			'steer_policy:range(0,255)' \
+            'steer_policy:range(0,255)' \
 			'util_threshold:range(0,255)' \
 			'rcpi_threshold:range(0,255)' \
 			'report_rcpi_threshold:range(0,255)' \
 			'include_sta_stats:bool:false' \
 			'include_sta_metric:bool:false' \
 			'rcpi_hysteresis_margin:range(0,255)' \
-			'report_util_threshold:range(0,255)' \
-			'encryption:or("sae", "psk2", "sae-mixed")'
+			'report_util_threshold:range(0,255)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of radio section failed"
@@ -182,31 +178,14 @@ validate_policy_section() {
 	return 0
 }
 
-validate_dyn_bh_section() {
-	local section="$1"
-
-	uci_validate_section mapagent $section "${1}" \
-			'missing_bh_timer:range(1,255)'
-	uci_validate_section mapagent $section "${1}" \
-			'missing_bh_reconfig_timer:range(0,65535)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapagent" "Validation of dynamic backhaul section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
 validate_agent_config() {
 	IS_CFG_VALID=1
 
 	validate_agent_section &&
 		config_foreach validate_cs_section controller_select &&
 		config_foreach validate_ap_section ap &&
-		config_foreach validate_radio_section radio &&
-		config_foreach validate_policy_section policy &&
-		config_foreach validate_dyn_bh_section dynamic_backhaul
+        config_foreach validate_radio_section radio &&
+        config_foreach validate_policy_section policy
 
 	[ "$IS_CFG_VALID" -ne 1 ] && {
 		logger -s -t "mapagent" "Validation of mapagent UCI file failed"
@@ -215,10 +194,6 @@ validate_agent_config() {
 	return 0
 }
 
-create_dir() {
-        mkdir -p /var/run/multiap
-}
-
 start_service() {
 	[ -f /usr/sbin/dynbhd ] && start_dynbhd_service
 
@@ -238,8 +213,7 @@ start_service() {
 	[ "$ts" -eq 1 ] && create_map #|| remove_map
 
 	procd_open_instance
-	create_dir
-	procd_set_param command "/usr/sbin/mapagent" "-d"
+        procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1

map-agent/files/etc/uci-defaults/991-map-agent-unset-pvid

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset_pvid() {
-	local section=$1
-
-	uci -q set mapagent.${section}.pvid="0"
-}
-
-config_load mapagent
-
-config_foreach unset_pvid policy

map-agent/files/lib/wifi/multiap

@@ -0,0 +1,841 @@
+#!/bin/sh
+
+# functions
+# wireless_teardown - tear down ifaces based on mapagent config
+# setup_network     - prepare /etc/config/network if necessary
+# setup_wireless    - prepare /etc/config/wireless based on mapagent config
+# write_credentials - write bBSS credentials to fBSS
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+. /lib/wifi/traffic_separation
+
+MAPFILE="/tmp/multiap.backhaul"
+
+diff=0
+onbrd_bssid=0
+onbrd_band=0
+
+usage() {
+	cat <<EOF
+Usage: $0 [wireless_teardown|setup_network|setup_wireless|write_credentials]
+Platform specific Multi-AP script to prepare network and wifi subsystem based on
+mapagent configuration.
+wireless_teardown - tear down ifaces in /etc/config/wireless
+setup_network     - prepare /etc/config/network
+setup_wireless    - prepare /etc/config/wireless
+write_credentials - write bBSS credentials to fBSS
+EOF
+	exit 1
+}
+
+
+type_to_multi_ap () {
+	type="$1"
+
+	if [ "$type" = "backhaul" ]; then
+		echo "1"
+		return
+	elif [ "$type" = "fronthaul" ]; then
+		echo "2"
+		return
+	elif [ "$type" = "combined" ]; then
+		echo "3"
+		return
+	fi
+
+	echo "0"
+}
+
+get_type_by_section() {
+	section="$1"
+
+	config_get type $section type "0"
+
+	echo "$(type_to_multi_ap $type)"
+}
+
+brcm_sync_credentials() {
+	bands=""
+	json_init
+	mapagent_process_fh() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		[ "$dev" != "$device" ] && return
+
+		config_get band $section band
+		config_get ssid $section ssid
+		config_get encryption $section encryption
+		config_get key $section key
+
+		section=$(uci add ieee1905 ap)
+		[ "$section" == "" ] && return
+
+		uci -q set ieee1905.${section}.band=$band
+		uci -q set ieee1905.${section}.ssid="$ssid"
+		uci -q set ieee1905.${section}.encryption=$encryption
+		uci -q set ieee1905.${section}.key="$key"
+		json_select "$band" > /dev/null
+		if [ "$?" = "0" ]; then
+			json_get_keys keys
+
+			for key in ${keys};
+			do
+				json_get_var val "$key"
+				uci -q set ieee1905.${section}.$key="$val"
+			done
+			json_select ..
+		fi
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+		config_get band $section band
+		config_get dedicated_backhaul $section dedicated_backhaul 0
+
+		[ "$dedicated_backhaul" != "0" ] && return
+
+		for b in $bands; do
+			if [ "$b" == "$band" ]; then
+				return
+			fi
+		done
+
+		config_foreach mapagent_process_fh ap $device
+		bands="$bands $band"
+	}
+
+	ieee1905_del_ap() {
+		append_value() {
+			local section=$1
+			local key=$2
+			shift
+			shift
+
+			while [ "$key" != "" ]; do
+				val=$(uci -q get ieee1905.$section.$key)
+				[ "$val" = "" ] && {
+					key=$1
+					shift
+					continue
+				}
+				json_add_string "$key" ${val}
+				key=$1
+				shift
+			done
+		}
+
+		local section=$1
+		local band
+
+		config_get band $section band
+		json_select "$band" > /dev/null
+		rc=$?
+		[ "$rc" != "0" ] && json_add_object "$band"
+		append_value $section "manufacturer" "model_name" "device_name" "model_number" "serial_number" "device_type" "os_version"
+		if [ "$rc" != "0" ]; then
+			json_close_object
+		else
+			json_select ..
+		fi
+
+		uci -q delete ieee1905.${section}
+	}
+
+	config_load ieee1905
+	config_foreach ieee1905_del_ap ap
+
+	config_load mapagent
+	config_foreach mapagent_process_radio radio
+
+	uci commit ieee1905
+	json_cleanup
+}
+
+brcm_write_credentials() {
+	config_load mapagent
+
+	mapagent_apply_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+			local bk_ssid="$3"
+			local bk_key="$4"
+
+			config_get ifname $section ifname
+
+			#echo found device=$device map=$multi_ap ifname=$ifname mapifname=$map_ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+			uci -q set wireless.${section}.multi_ap_backhaul_ssid="$bk_ssid"
+			uci -q set wireless.${section}.multi_ap_backhaul_key="$bk_key"
+		}
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface "$1" "$2" "$3"
+	}
+
+	mapagent_find_fbss() {
+		local section=$1
+		local dev=$2
+		local bk_ssid="$3"
+		local bk_key="$4"
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "2" ] && return
+
+		config_get ifname $section ifname
+
+		#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+		# subshell in hopes to maintain mapagent config loaded
+		echo $(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key") 2> /dev/null
+	}
+
+	mapagent_find_bbss() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+		config_get enabled $section enabled "1"
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$enabled" == "0" ] && return
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "1" ] && return
+
+		config_get ssid $1 ssid
+		config_get key $1 key
+
+		#echo found ssid="$ssid" key="$key"
+
+		config_foreach mapagent_find_fbss ap $dev "$ssid" "$key"
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+
+		#echo found dev=$dev
+
+		config_foreach mapagent_find_bbss ap $device
+	}
+
+
+	config_foreach mapagent_process_radio radio
+
+	uci commit wireless
+}
+
+brcm_set_network() {
+	local ifname=$1
+	local num=$2
+	local bssid=$3
+
+	wpa_cli -i $ifname set_n $num bssid $bssid
+}
+
+bsta_steer() {
+	local ifname=$1
+	local bssid=$2
+
+	rc=$(wpa_cli -i $ifname set_n 0 bssid $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+
+	rc=$(wpa_cli -i $ifname roam $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+}
+
+write_bsta_config() {
+	local ifname=$1
+
+	#echo diff = $diff > /dev/console
+
+
+	config_load mapagent
+
+	mapagent_apply_wl_bsta() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+			local bssid=$3
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			#echo setting diff = $diff > /dev/console
+			uci -q set wireless.${section}.bssid=$bssid
+			echo 1
+		}
+		config_load wireless
+
+		config_foreach apply_config wifi-iface $1 $2
+		uci commit wireless
+	}
+
+	mapagent_process_bk() {
+		local section=$1
+		local bsta=$2
+
+
+		config_get ifname $section ifname
+		#echo bsta = $bsta > /dev/console
+
+		[ "$bsta" == "$ifname" ] || return
+		#echo found ifname=$ifname > /dev/console
+
+		config_get bssid $section bssid
+		config_get band $section band
+		ret=$(mapagent_apply_wl_bsta $ifname $bssid)
+		[ "$ret" == "1" ] && {
+			diff=1
+			onbrd_bssid=$bssid
+			onbrd_band=$band
+		}
+	}
+
+	mapagent_apply_bssid_same_band() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			uci -q set wireless.${section}.bssid=$bssid
+		}
+
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onbrd_band" != "$band" -o "$onboarded" = "1" ] && return
+
+		config_get ifname $1 ifname
+
+		config_load wireless
+		config_foreach apply_config wifi-iface $ifname $onbrd_bssid
+		uci commit wireless
+	}
+
+	config_foreach mapagent_process_bk bsta $ifname
+
+	#echo result diff = $diff > /dev/console
+	[ "$diff" == "1" ] && {
+		config_foreach mapagent_apply_bssid_same_band bsta
+		ubus call uci commit '{"config":"wireless"}'
+		#echo reloading wireless > /dev/console
+	}
+
+}
+
+brcm_teardown_iface() {
+	config_load mapagent
+
+	local iface=$1
+
+	mapagent_teardown_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+
+			config_get ifname $section ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			uci -q set wireless.${section}.start_disabled="1"
+			uci -q set wireless.${section}.ssid="DISABLED-SSID"
+			uci -q set wireless.${section}.key="DISABLED-KEY"
+			uci -q delete wireless.${section}.multi_ap_backhaul_ssid
+			uci -q delete wireless.${section}.multi_ap_backhaul_key
+		}
+
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface $1
+	}
+
+	mapagent_teardown_bss() {
+		local section=$1
+		local iface=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get ifname $section ifname
+
+		[ "$iface" != "$ifname" ] && return
+
+		config_get ifname $section ifname
+		uci -q set mapagent.${section}.enabled="0"
+		uci -q set mapagent.${section}.ssid="DISABLED-SSID"
+		uci -q set mapagent.${section}.key="DISABLED-KEY"
+
+		# subshell in hopes to maintain mapagent config loaded
+		$(mapagent_teardown_wireless $ifname)
+	}
+
+
+	config_foreach mapagent_teardown_bss ap $iface
+
+	uci commit wireless
+	uci commit mapagent
+}
+
+brcm_bsta_to_wireless() {
+	config_load mapagent
+
+	mapagent_find_lowest_prio_onboarded() {
+		mapagent_process_bk() {
+			config_get priority $1 priority "2"
+			config_get onboarded $1 onboarded "0"
+
+			[ "$onboarded" = "0" ] && return
+
+			if [ -z "$sec" -o "$prio" = "-1" -o "$priority" -lt "$prio" ]; then
+				sec=$1
+				prio=$priority
+			fi
+		}
+
+		local sec=""
+		local prio="-1"
+
+		config_foreach mapagent_process_bk bsta
+		echo $sec
+	}
+
+	mapagent_enable_best() {
+		#echo 1=$1 best=$best > /dev/console
+		if [ "$1" = "$best" ]; then
+			uci -q set mapagent.$1.enabled='1'
+		else
+			uci -q set mapagent.$1.enabled='0'
+		fi
+	}
+
+	mapagent_bsta_to_wireless() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section=$1
+				local bsta=$2
+				local ssid="$3"
+				local key="$4"
+				local encryption=$5
+				local enabled=$6
+				local bssid=$7
+				local disabled="0"
+
+				config_get ifname $section ifname
+
+				[ -z "$enabled" -o "$enabled" = "0" ] && disabled="1"
+
+				[ "$bsta" == "$ifname" ] || return
+
+				uci -q set wireless.${section}.ssid="$ssid"
+				uci -q set wireless.${section}.key="$key"
+				uci -q set wireless.${section}.encryption=$encryption
+				uci -q set wireless.${section}.bssid="$bssid"
+				uci -q set wireless.${section}.default_disabled='0'
+
+				[ "$disabled" != "1" ] && return
+				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
+				wpa_cli -i "$bsta" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$bsta" save_config > /dev/null 2>&1
+
+				echo 1
+			}
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $@
+			uci commit wireless
+		}
+
+		mapagent_find_other_creds() {
+			#echo "trying to find other creds for $2" > /dev/console
+			config_get band $1 band
+			config_get onboarded $1 onboarded "0"
+
+			[ "$3" != "$band" -o "$onboarded" = "0" ] && return
+
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get enabled $1 enabled "0"
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $2 "$ssid" "$key" $encryption $4 "$bssid")
+		}
+
+		config_get band $1 band
+		config_get ifname $1 ifname
+		config_get onboarded $1 onboarded "0"
+		config_get enabled $1 enabled "0"
+
+		if [ "$onboarded" = "0" ]; then
+			config_foreach mapagent_find_other_creds bsta $ifname $band $enabled
+		else
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
+		fi
+	}
+
+#	best=$(mapagent_find_lowest_prio_onboarded)
+#
+#	[ -z "$best" ] && return
+#
+#	band=$1
+#	sec=""
+#	prio=""
+#
+#	config_foreach mapagent_enable_best bsta $best
+#	uci commit mapagent
+	config_load mapagent
+
+	diff=$(config_foreach mapagent_bsta_to_wireless bsta)
+
+#	[ "$diff" != "" ] && {
+		ubus call uci commit '{"config":"wireless"}'
+#	}
+}
+
+
+sync_mapcontroller_from_wireless() {
+	ubus -t 5 wait_for wifi
+	[ "$?" != "0" ] && return
+
+	[ ! -f "/etc/config/wireless" ] && return
+
+	status=$(ubus -S call wifi status)
+
+	device_to_band() {
+		local ifname=$1
+		json_load "$status"
+		json_select "radios"
+		json_get_keys keys
+
+		for key in $keys; do
+			json_select $key
+			json_get_var name name
+
+			if [ "$name" != "$ifname" ]; then
+				json_select ..
+				continue
+			fi
+
+			json_get_var band band
+
+			if [ "$band" == "5GHz" ]; then
+				echo "5"
+			elif [ "$band" == "2.4GHz" ]; then
+				echo "2"
+			fi
+
+			break
+		done
+
+		json_cleanup
+	}
+
+	wireless_process_iface() {
+		local section=$1
+		local type="ap"
+		local enabled="1"
+
+		config_get multi_ap $section multi_ap 0
+		[ "$multi_ap" != "1" ] && [ "$multi_ap" != "2" ] && return
+
+		config_get mode $section mode "ap"
+		[ "$mode" != "ap" ] && return
+
+		config_get device $section device
+		band=$(device_to_band $device)
+		[ "$band" == "" ] && return
+
+		config_get ssid $section ssid
+		config_get key $section key
+		config_get encryption $section encryption
+		config_get start_disabled $section start_disabled "0"
+		config_get network $section network
+
+
+		cntlr_section=$(uci add mapcontroller ${type})
+		uci -q set mapcontroller.${cntlr_section}.ssid="$ssid"
+		uci -q set mapcontroller.${cntlr_section}.key="$key"
+		uci -q set mapcontroller.${cntlr_section}.encryption="$encryption"
+		uci -q set mapcontroller.${cntlr_section}.band="$band"
+		uci -q set mapcontroller.${cntlr_section}.vid="1"
+		uci -q set mapcontroller.${cntlr_section}.network="$network"
+
+		[ "$multi_ap" == "1" ] && map_type="backhaul" || map_type="fronthaul"
+		uci -q set mapcontroller.${cntlr_section}.type="$map_type"
+
+		[ "$start_disabled" == "1" ] && enabled="0"
+		uci -q set mapcontroller.${cntlr_section}.enabled="$enabled"
+	}
+
+	mapcontroller_teardown() {
+		local section=$1
+
+		uci delete mapcontroller.$1
+	}
+
+	config_load mapcontroller
+	config_foreach mapcontroller_teardown ap
+
+	config_load wireless
+	config_foreach wireless_process_iface wifi-iface
+	uci commit mapcontroller
+}
+
+bsta_scan_on_enabled() {
+	local onboarded_bands=""
+
+	mapagent_onboarded_bands() {
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onboarded" = "0" ] && return
+
+		onboarded_bands="$onboarded_bands $band"
+	}
+
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname
+		config_get band $1 band
+		config_get enabled $1 enabled
+
+		[ "$enabled" = "0" ] && return
+
+		for onboarded_band in $onboarded_bands
+		do
+			[ "$onboarded_band" != "$band" ] && continue
+
+			logger -t multiap "bsta_scan_on_enabled $ifname $band"
+			wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
+			wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
+			wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		done
+	}
+
+	config_load mapagent
+	config_foreach mapagent_onboarded_bands bsta
+	config_foreach mapagent_enable_bk bsta
+}
+
+bsta_enable_all() {
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname "2"
+		uci -q set mapagent.$1.enabled="1"
+	}
+
+	config_load mapagent
+
+	config_foreach mapagent_enable_bk bsta
+	uci commit mapagent
+	bsta_scan_on_enabled
+}
+
+bsta_disable_lower_priority() {
+	config_load mapagent
+
+	mapagent_get_priority() {
+		config_get ifname $1 ifname
+
+		[ "$ifname" != "$2" ] && return
+
+		config_get priority $1 priority "2"
+
+		echo "$priority"
+	}
+
+	mapagent_disable_lower_bk() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section="$1"
+				local bsta="$2"
+				local enabled="$3"
+
+				config_get ifname $section ifname
+
+				[ "$bsta" == "$ifname" ] || return
+
+				[ "$enabled" != "0" ] && return
+
+				wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+				wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+			}
+			local ifname="$1"
+			local enabled="$2"
+
+			[ "$enabled" != "0" ] && return
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $ifname $enabled
+		}
+
+		local enabled="1"
+
+		config_get ifname $1 ifname
+		config_get priority $1 priority
+
+		[ "$ifname" != "$2" -a "$priority" -gt "$3" ] && enabled="0"
+
+		uci -q set mapagent.$1.enabled="$enabled"
+
+		echo $(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
+	}
+
+	local bsta=$1
+
+	prio=$(config_foreach mapagent_get_priority bsta $bsta)
+	#echo bsta $bsta has prio $prio > /dev/console
+
+	config_foreach mapagent_disable_lower_bk bsta $bsta $prio
+	uci commit mapagent
+
+#	ubus call uci commit '{"config":"wireless"}'
+}
+
+
+bsta_use_link() {
+	config_load mapagent
+
+	mapagent_disable_bk() {
+		local bsta="$2"
+
+		config_get ifname $1 ifname
+		config_get enabled $1 enabled
+
+		[ "$bsta" = "$ifname" ] && return
+
+		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+		wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+	}
+
+	local bsta=$1
+
+	config_foreach mapagent_disable_bk bsta $bsta
+}
+
+bsta_swap_to_link() {
+	bsta_disable_lower_priority $1
+	bsta_use_link $1
+
+	wpa_cli -i "$1" enable_network 0 > /dev/null
+	wpa_cli -i "$1" reconnect > /dev/null
+	wpa_cli -i "$1" save_config > /dev/null
+}
+
+set_uplink_backhaul_info() {
+	local ul_1905id=$1
+	local ul_mac=$2
+
+	json_load "$(cat $MAPFILE)"
+	json_add_string "backhaul_device_id" "$ul_1905id"
+	json_add_string "backhaul_macddr" "$ul_mac"
+	json_dump > "$MAPFILE"
+	json_cleanup
+}
+
+set_uplink() {
+	local type=$1
+	local ifname=$2
+	local hwaddr
+
+	hwaddr="$(ifconfig $ifname | grep -i hwaddr | awk '{print $5}' | awk '{print tolower($0)}')"
+
+	json_init
+	json_add_string "type" "$type"
+	json_add_string "ifname" "$ifname"
+	json_add_string "macaddr" "$hwaddr"
+	json_dump > "$MAPFILE"
+	json_cleanup
+}
+
+unset_uplink() {
+	rm "$MAPFILE" > /dev/null 2>&1
+}
+
+set_start_disabled() {
+	local value=$1
+
+	mapagent_set_start_disabled() {
+		local section=$1
+		local value=$2
+
+		config_get ifname $section ifname
+
+		hostapd_cli -i "$ifname" set start_disabled $value
+		hostapd_cli -i "$ifname" reload
+	}
+
+	config_load mapagent
+	config_foreach mapagent_set_start_disabled ap $value
+}
+
+func=$1
+shift
+
+case "$func" in
+	wireless_teardown) brcm_wireless_teardown;;
+	setup_network) brcm_setup_network;;
+	setup_wireless) brcm_setup_wireless;;
+	write_credentials) brcm_write_credentials;;
+	sync_credentials) brcm_sync_credentials;;
+	bsta_steer) bsta_steer $@;;
+	set_network) brcm_set_network $@;;
+	write_bsta_config) write_bsta_config $@;;
+	teardown_iface) brcm_teardown_iface $@;;
+	bsta_to_wireless) brcm_bsta_to_wireless $@;;
+	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
+	ts) ts_sub $@;;
+	bsta_enable_all) bsta_enable_all $@;;
+	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;
+	bsta_scan_on_enabled) bsta_scan_on_enabled $@;;
+	bsta_use_link) bsta_use_link $@;;
+	bsta_swap_to_link) bsta_swap_to_link $@;;
+	set_uplink) set_uplink $@;;
+	set_uplink_backhaul_info) set_uplink_backhaul_info $@;;
+	unset_uplink) unset_uplink $@;;
+	set_start_disabled) set_start_disabled $@;;
+	--help|help) usage;;
+	*) usage; exit 1;;
+esac
+

map-agent/files/lib/wifi/traffic_separation

@@ -0,0 +1,481 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+### Traffic Separation ###
+
+dbg() {
+	logger -t traffic_separation $@
+}
+
+ts_sub() {
+
+	ts_usage() {
+		cat <<EOF
+Usage: $0 [create|delete|populate|primary|reload]
+Traffic Separation related functions.
+create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
+create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
+create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethernet interface
+delete <iface>				- delete vlan device
+populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
+primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
+reload     				- reload network with new configuration
+EOF
+	exit 1
+	}
+
+	_get_bridge() {
+		local bridge=$(ip link show $1 | grep -o "master [^\s]*" | cut -d ' ' -f 2)
+		echo $bridge
+	}
+
+	set_wireless_bridge() {
+		config_load wireless
+
+		_set_network() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+			[ "$iface" != "$ifname" ] && continue
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
+
+			config_get network $sec network
+			local new_network=${bridge##br-}
+			if [ "$new_network" != "$network" ] ; then
+				uci -q set wireless.${sec}.network=${new_network}
+				uci commit wireless
+			fi
+
+			brctl addif $bridge $iface &> /dev/null
+		}
+
+		config_foreach _set_network wifi-iface ${1} ${2}
+	}
+
+	ts_create() {
+
+		_create_vlan_dev() {
+			iface=$1				# real iface
+			vid=$2					# Vlan ID
+			bridge=$3				# bridge iface should be connected
+			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+			vlan_dev=${iface}_vlan${vid}		# name of vlan device to create
+
+			# remove interface from bridge if it is in one
+			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
+
+			# create vlan device
+			ip link show $vlan_dev &> /dev/null && vlanctl --if-delete $vlan_dev &> /dev/null
+			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
+
+			# bring the vlan device up and add back to bridge if it was in one
+			brctl addif $bridge $vlan_dev &> /dev/null
+			ip link set $vlan_dev up
+
+			echo $vlan_dev
+		}
+
+		ts_create_fh() {
+			iface=$1				# fh iface
+			vid=$2					# SSID specific (secondary) or primary vid
+			bridge=$3
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
+				cat <<EOF
+Adding FH device requires IFACE, VID and bridge
+EOF
+				exit 1
+			}
+
+			# create vlan device
+			set_wireless_bridge $iface $bridge
+			vlan_dev=$(_create_vlan_dev $iface $vid $bridge)
+
+			# add rules
+			# Note: removing these for now since these packets are read directly from the iface anyway
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x888e --set-rxif $vlan_dev --rule-append		# incoming EAPOL
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
+		}
+
+# Note: Currently not used (will be needed for Profile 1)
+		ts_create_bh() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
+
+			# create vlan device
+			vlan_dev=$(_create_vlan_dev $iface $vid)
+
+			# add rules
+			case "$profile" in
+				1 | profile_1 | profile1 | Profile_1 | Profile1)
+					vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --pop-tag --rule-append
+					;;
+				2 | profile_2 | profile2 | Profile_2 | Profile2)
+					vlanctl --if $iface --rx --tags 1 --set-rxif $vlan_dev --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --rule-append								# note: already default
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x893a --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing IEEE1905.1
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x888e --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing EAPOL
+					;;
+				*)
+					ts_delete $iface
+					ts_usage
+					exit 1
+					;;
+			esac
+
+			set_wireless_bridge $iface $bridge
+		}
+
+		ts_create_bh_drv() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
+			bridge=$4				# bridge interface should be connected to
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
+
+			[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
+
+			old_vid=$(wl -i $1 map_8021q_settings)
+			old_vid=${old_vid##* }
+			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
+
+			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
+
+			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
+			wl -i $iface down &> /dev/null
+			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
+			wl -i $iface map_8021q_settings $vid &> /dev/null	# can only be set on bBSS (read-only on bSTA)
+			wl -i $iface up &> /dev/null
+		}
+
+		ts_create_eth() {
+			iface=$1				# Multi-AP Logical Ethernet Interface
+			vid=$2					# primary vid
+			pbits=$3				# default pbits to apply
+			vlan_bridge=$4				# name of ts subsystem bridge
+			lan_bridge=$5				# name of node local bridge
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
+				cat <<EOF
+Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
+EOF
+				exit 1
+			}
+
+			ip link set lei down
+			ip link set lei_map down
+
+			old_bridge="$(_get_bridge lei_lan)"
+			[ -n "$old_bridge" ] && brctl delif $old_bridge lei_lan &> /dev/null
+
+			ip link show lei_lan || ip link del lei_lan
+			ip link add link lei name lei_lan type vlan id ${vid}
+
+			brctl addif ${lan_bridge} lei_lan &>/dev/null
+			brctl addif ${vlan_bridge} lei_map &>/dev/null
+
+			ip link set lei up
+			ip link set lei_map up
+			ip link set lei_lan up
+		}
+
+		ts_create_dhcp() {
+			local diff=""
+
+                        _net_setup() {
+				local name=$1
+				local devname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="$devname"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					# TODO vid > 255
+					local ip_addr="192.168.${vid}.1"
+					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
+					uci -q set network.${name}.ipaddr="${ip_addr}"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_br_setup() {
+				local name=$1
+				local sinkname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name}_dev)" ] && {
+					uci -q set network.${name}_dev="device"
+					uci -q set network.${name}_dev.name="br-${name}"
+					uci -q set network.${name}_dev.type="bridge"
+					uci -q set network.${name}_dev.bridge_empty="1"
+					uci -q add_list network.${name}_dev.ports="${sinkname}"
+
+					diff="1"
+				}
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="br-${name}"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					uci -q set network.${name}.ipaddr="192.168.${vid}.1"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_dhcp_setup() {
+				local name=$1
+
+				[ -n "$(uci -q get dhcp.${name})" ] && return
+
+				uci -q set dhcp.${name}=dhcp
+				uci -q set dhcp.${name}.interface="${name}"
+				uci -q set dhcp.${name}.start="100"
+				uci -q set dhcp.${name}.limit="150"
+				uci -q set dhcp.${name}.leasetime="1h"
+				uci -q set dhcp.${name}.dhcpv4="server"
+				uci -q set dhcp.${name}.dhcpv6="server"
+				uci -q set dhcp.${name}.ra="server"
+				uci -q set dhcp.${name}.ra_slaac="1"
+				uci -q add_list dhcp.${name}.ra_flags="managed-config"
+				uci -q add_list dhcp.${name}.ra_flags="other-config"
+
+				diff="1"
+				uci -q commit dhcp
+			}
+
+			_firewall_setup() {
+				local name=$1
+				local network=$2
+				local zone_exist=0
+
+				config_load firewall
+
+				_process_zone() {
+					local section=$1
+					local new_name=$2
+					local name
+
+					config_get name $section name
+
+					[ "$name" == "$new_name" ] && zone_exist=1
+				}
+
+				config_foreach _process_zone zone $name
+
+				[ "$zone_exist" != "0" ] && return
+
+				uci -q add firewall zone
+				uci -q set firewall.@zone[-1].name="$name"
+				uci -q add_list firewall.@zone[-1].network="$network"
+				uci -q set firewall.@zone[-1].input='ACCEPT'
+				uci -q set firewall.@zone[-1].output='ACCEPT'
+				uci -q set firewall.@zone[-1].forward='ACCEPT'
+
+				uci -q add firewall forwarding
+				uci -q set firewall.@forwarding[-1].src="$name"
+				uci -q set firewall.@forwarding[-1].dest="wan"
+
+				diff="1"
+				uci -q commit firewall
+			}
+
+			vid=$1					# primary vid
+
+			[ -n "$vid" ] || {
+				cat <<EOF
+VID required to configure DHCP.
+EOF
+				exit 1
+			}
+
+			ip link show sink${vid} || {
+				ip link add sink${vid} type veth peer name sink${vid}_vlan
+				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
+			}
+
+			ip link set sink${vid} up
+			ip link set sink${vid}_peer up
+			ip link set sink${vid}_vlan up
+
+			diff=""
+			_net_setup sink${vid} sink${vid}_peer ${vid}
+			_dhcp_setup sink${vid}
+			_firewall_setup lan${vid} sink${vid}
+
+			[ "$diff" = "1" ] && {
+				ubus call network reload
+				ubus -t 5 wait_for network.interface.sink${vid}
+			}
+
+			brctl addif br-map sink${vid}_vlan &> /dev/null
+		}
+
+	local type=$1
+	shift
+
+	case "$type" in
+		fh) ts_create_fh $@;;
+#		bh) ts_create_bh $@;;
+		bh) ts_create_bh_drv $@;;
+		eth) ts_create_eth $@;;
+		dhcp) ts_create_dhcp $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+	}
+
+	ts_delete() {
+		iface=$1
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 0
+
+		vlan_dev=${path##*upper_}
+		bridge="$(_get_bridge $vlan_dev)"
+
+		[ -n "$bridge" ] && {
+			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
+			brctl addif $bridge $iface &> /dev/null # needed to add again
+                }
+
+	}
+
+	ts_populate() {
+		local type=$1
+		shift
+
+		[ "$type" == "eth" ] || {
+			cat <<EOF
+Populating ETH rules requires IFACE and VID.
+EOF
+			exit 1
+		}
+
+		iface=$1				# Multi-AP Logical Ethernet Interface
+		vid=$2					# secondary vid
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 1
+		vlan_dev=${path##*upper_}
+
+		# add rules
+		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
+		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
+	}
+
+	ts_primary() {
+		local func=$1
+		shift
+
+		case "$func" in
+			get) vid=$(wl -i $1 map_8021q_settings); echo ${vid##* };;
+			*) ts_usage; exit 1;;
+		esac
+	}
+
+	ts_unicast() {
+		local mac=$1
+		local iface=$2
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "$mac" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d "$mac" -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d "$mac" -p 0x893a -j DROP
+	}
+
+	ts_multicast() {
+		local iface=$1
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "1:80:C2:00:00:13" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -D BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+	}
+
+	ts_reload() {
+		local dhcp_reload=$1
+
+		# workaround for missing backhaul wifi.ap.* ubus obj's:
+		# iterate in config and setup bh
+		config_load wireless
+
+		_setup_bh_iface() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
+				ts_create bh $ifname 1 2 br-map
+			}
+		}
+
+		config_foreach _setup_bh_iface wifi-iface
+
+		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
+
+		# another workaround for netif? removed
+		# sink devices for br-map bridge
+		for sink in $(ubus list network.interface.sink*) ; do
+			local sink_vlan=${sink/network.interface./}_vlan
+			brctl addif br-map $sink_vlan &> /dev/null
+		done
+	}
+
+	local func=$1
+	shift
+
+	case "$func" in
+		create) dbg "create $@"; ts_create $@;;
+		delete) dbg "delete $@"; ts_delete $@;;
+		populate) dbg "populate $@"; ts_populate $@;;
+		primary) dbg "primary $@"; ts_primary $@;;
+		unicast) dbg "unicast $@"; ts_unicast $@;;
+		multicast) dbg "multicast $@"; ts_multicast $@;;
+		reload) dbg "reload $@"; ts_reload $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+}

map-controller/Config.in

@@ -1,26 +0,0 @@
-if (PACKAGE_map-controller)
-
-menu "Configurations"
-
-config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-config CONTROLLER_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through CONTROLLER_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-controller/Makefile

@@ -1,13 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.11.0.4
+PKG_VERSION:=6.0.3
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=a4a626539ede73c1c4eb1ad768331524a8ee9ce8
+PKG_SOURCE_VERSION:=132bc92f12dcc3c6584307c80eef012fc1f26c28
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -17,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-controller
@@ -34,25 +34,16 @@ define Package/map-controller/description
 endef
 
 define Package/map-controller/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
-ifeq ($(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/

map-controller/files/etc/config/mapcontroller

@@ -1,143 +1,67 @@
 config controller 'controller'
 	option enabled '1'
-	option registrar '2 5'
-	option debug '0'
+	option registrar '5 2'	    #bands on which wps registrar supported
+	option debug '6'
 	option enable_sta_steer '0'
 	option enable_bsta_steer '0'
-	option use_bcn_metrics '0'
-	option use_usta_metrics '0'
-	option primary_vid '0'
+	option primary_vid '1'
 	option primary_pcp '0'
-	option allow_bgdfs '0'
-	option channel_plan '0'
 
-config ap
-	option band '2'
-	option encryption 'sae-mixed'
-	option vid '1'
-	option ssid 'IOWRT-2.4GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+config interface 'lan'
+	option 'dhcp'
 
 config ap
 	option band '5'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+	option ssid 'map-net5'
+	option vid '1'
 	option type 'fronthaul'
-	option vid '1'
-	option ssid 'IOWRT-5GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option network 'lan'
 
 config ap
 	option band '2'
-	option type 'backhaul'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+	option ssid 'map-net2'
 	option vid '1'
-	list disallow_bsta '0'
-	option ssid 'MAP-BH-2.4GHz'
-	option encryption 'sae'
-	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+	option type 'fronthaul'
+	option network 'lan'
 
 config ap
 	option band '5'
-	option type 'backhaul'
-	option vid '1'
-	list disallow_bsta '0'
-	option ssid 'MAP-BH-5GHz'
 	option encryption 'sae'
-	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+	option key '5555555555'
+	option ssid 'map-bkhaul-5'
+	option type 'backhaul'
+	option disallow_bsta '1'		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)
+	option vid '1'
+	option network 'lan'
 
-# node and radio sections (per node) are auto
-# generated per Multi-AP Agent in the network
-#
-#config node 'node_0a1b2c3d4e50'
-#	option agent_id '0a:1b:2c:3d:4e:50'
-# following values use default values after onboarding if not explicitly set
-#	option backhaul_ul_macaddr '00:00:00:00:00:00'
-#	option backhaul_dl_macaddr '00:00:00:00:00:00'
-#	option backhaul_type 'none'
-#	option primary_vid '1'
-#	option primary_pcp '0'
-#	option report_sta_assocfails '0'
-#	option report_sta_assocfails_rate '0'
-#	option report_metric_periodic '0'
-#	option report_scan '0'
-#	option steer_exclude '0'
-#	option steer_exclude_btm '0'
-#	option steer_disallow '0'
-#	option coordinated_cac '0'
-#	option traffic_separation '0'
-#	option sta_steer '0'
+config ap
+	option band '2'
+	option encryption 'sae'
+	option key '2222222222'
+	option ssid 'map-bkhaul-2'
+	list disallow_bsta '0'                # 0 or 1 profile-1 bSTA
+	option vid '1'
+	option type 'backhaul'
+	option network 'lan'
 
-#config radio 'radio_0a1b2c3d4e53'
-#	option agent_id '0a:1b:2c:3d:4e:50'
-#	option macaddr '0a:1b:2c:3d:4e:53'
-#	option band '2'
-# following values use default values after onboarding if not explicitly set
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '70'
-#	option report_rcpi_threshold '80'
-#	option report_util_threshold '0'
-#	option report_rcpi_hysteresis_margin '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
-
-#config radio 'radio_0a1b2c3d4e54'
-#	option agent_id '0a:1b:2c:3d:4e:50'
-#	option macaddr '0a:1b:2c:3d:4e:54'
-#	option band '5'
-# following values use default values after onboarding if not explicitly set
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '86'
-#	option report_rcpi_threshold '96'
-#	option report_util_threshold '0'
-#	option report_rcpi_hysteresis_margin '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
-
-#config node 'node_3fb1c2d3e460'
-#	option agent_id '3f:b1:c2:d3:e4:60'
-# following values use default values after onboarding if not explicitly set
-#	option backhaul_ul_macaddr '00:00:00:00:00:00'
-#	option backhaul_dl_macaddr '00:00:00:00:00:00'
-#	option backhaul_type 'none'
-#	option primary_vid '1'
-#	option primary_pcp '0'
-#	option report_sta_assocfails '0'
-#	option report_sta_assocfails_rate '0'
-#	option report_metric_periodic '0'
-#	option report_scan '0'
-#	option steer_exclude '0'
-#	option steer_exclude_btm '0'
-#	option steer_disallow '0'
-#	option coordinated_cac '0'
-#	option traffic_separation '0'
-#	option sta_steer '0'
-
-#config radio 'radio_3fb1c2d3e463'
-#	option agent_id '3f:b1:c2:d3:e4:60'
-#	option macaddr '3f:b1:c2:d3:e4:63'
-#	option band '2'
-# following values use default values after onboarding if not explicitly set
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '70'
-#	option report_rcpi_threshold '80'
-#	option report_util_threshold '0'
-#	option report_rcpi_hysteresis_margin '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
-
-#config radio 'radio_3fb1c2d3e464'
-#	option agent_id '3f:b1:c2:d3:e4:60'
-#	option macaddr '3f:b1:c2:d3:e4:64'
-#	option band '5'
-# following values use default values after onboarding if not explicitly set
-#	option steer_policy '0'
-#	option util_threshold '0'
-#	option rcpi_threshold '86'
-#	option report_rcpi_threshold '96'
-#	option report_util_threshold '0'
-#	option report_rcpi_hysteresis_margin '0'
-#	option include_sta_stats '1'
-#	option include_sta_metric '1'
+config policy 'policy'
+	list steer_exclude '00:11:22:33:44:55'
+	list steer_exclude_btm '00:aa:bb:cc:dd:ee'
+	option steer_policy '2'                    # 0, 1, 2 - see MultiAP spec
+	option util_threshold '200'                # channel-util as in BSS load
+	option rcpi_threshold '30'                 # 0 - 220 valid range
+	option report_scan '0'                     # 0 or 1 for independent scans
+	option report_sta_assocfails '1'           # 0 or 1 - stas assoc failure
+	option report_sta_assocfails_rate '2'      # reporting rate for STA assoc fails (attempts per minute)
+	option report_metric_periodic '0'          # 0, or 1 - 255 in secs
+	option report_rcpi_threshold '0'           # 0, or 1 - 220
+	option report_util_threshold '0'           # 0, or  channel-util value
+	option rcpi_hysteresis_margin '0'          # 0, or > 0 - hysteresis margin
+	option include_sta_stats '0'               # sta stats in AP metric resp
+	option include_sta_metric '0'              # sta metric in AP metric resp
+	option disallow_bsta_p1 '0'                # 0 or 1 profile-1 bSTA
+	option disallow_bsta_p2 '0'                # 0 or 1 profile-2 bSTA

map-controller/files/etc/init.d/mapcontroller

@@ -23,10 +23,7 @@ validate_controller_section() {
 		'enable_sta_steer:bool:false' \
 		'enable_bsta_steer:bool:false' \
 		'use_bcn_metrics:bool:false' \
-		'use_usta_metrics:bool:false' \
-		'allow_bgdfs:range(0,2629744)' \
-		'channel_plan:range(0,2629744)' \
-		'enable_ts:bool:false'
+		'use_usta_metrics:bool:false'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapcontroller" "Validation of controller section failed"
@@ -40,10 +37,10 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'ssid:string' \
-			'encryption:or("sae", "sae+aes", "psk2",
-				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \
+			'encryption:or("sae-mixed", "sae", "psk-mixed", "psk2", "psk",
+						   "wpa-mixed", "wpa2", "wpa", "none", "open")' \
 			'key:string' \
 			'vid:range(1,65535):1' \
 			'type:or("backhaul", "fronthaul", "combined")' \

map-topology/Config.in

@@ -1,22 +0,0 @@
-if (PACKAGE_map-topology)
-
-menu "Configurations"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through TOPOLOGYD_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-topology/Makefile

@@ -1,45 +1,37 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.4
+PKG_VERSION:=3.2.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=488ce1ce576b57c9b3c4d7c034969bf65e66216f
+PKG_SOURCE_VERSION:=55b4bae9338ffa19255756c20626228ca4f30ee2
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DEPENDS:=ieee1905
-
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-topology
 	CATEGORY:=Utilities
 	DEPENDS:=+libubox +ubus +libpthread +libuci +libeasy \
-		 +libavahi-nodbus-support +libnetfilter-conntrack +libnfnetlink +libmnl
+		+libieee1905 +map-plugin +libavahi-nodbus-support
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
-define Package/map-topology/config
-	source "$(SOURCE)/Config.in"
-endef
-
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
 	-D_GNU_SOURCE
 
 define Package/map-topology/description
@@ -48,11 +40,6 @@ endef
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/map-topology/* $(PKG_BUILD_DIR)/

map-topology/files/etc/config/hosts

@@ -2,4 +2,3 @@
 config global 'global'
 	option ageing_timer '1440'
 	option reboot_persistent '0'
-	list ifname 'br-lan'

mosquitto-auth-shadow/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mosquitto-auth-shadow
-PKG_VERSION:=1.0.0
-
-PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
-PKG_LICENSE:=EPL-2.0
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mosquitto-auth-shadow
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=mosquitto - /etc/shadow authentication plugin
-  DEPENDS:=mosquitto
-  USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
-endef
-
-define Package/mosquitto-auth-shadow/description
-  Plugin for the mosquitto MQTT message broker that authenticates
-  users using /etc/shadow
-endef
-
-define Package/mosquitto-auth-shadow/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,mosquitto-auth-shadow))

mosquitto-auth-shadow/files/etc/uci-defaults/14_set-shadow-permissions

@@ -1 +0,0 @@
-chown root:shadow /etc/shadow && chmod 0640 /etc/shadow

mosquitto-auth-shadow/src/Makefile

@@ -1,25 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-TARGETS = mosquitto_auth_shadow.so
-
-all: $(TARGETS)
-
-%.pic.o: %.c
-	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
-
-mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
-	$(CC) $(LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(TARGETS)

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 2022 Genexis B.V.
- *
- * This program and the accompanying materials are made available under the
- * terms of the Eclipse Public License 2.0 which is available at
- * https://www.eclipse.org/legal/epl-2.0/
- *
- * SPDX-License-Identifier: EPL-2.0
- *
- * Contributors:
- *   Erik Karlsson - initial implementation
- */
-
-#include <string.h>
-#include <shadow.h>
-#include <crypt.h>
-#include <mosquitto.h>
-#include <mosquitto_broker.h>
-#include <mosquitto_plugin.h>
-
-static int basic_auth_callback(int event, void *event_data, void *userdata)
-{
-	struct mosquitto_evt_basic_auth *ed = event_data;
-	struct spwd spbuf, *sp = NULL;
-	char buf[256];
-	struct crypt_data data;
-	char *hash;
-
-	/* Let other plugins or broker decide about anonymous login */
-	if (ed->username == NULL)
-		return MOSQ_ERR_PLUGIN_DEFER;
-
-	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
-
-	if (sp == NULL || sp->sp_pwdp == NULL)
-		return MOSQ_ERR_AUTH;
-
-	/* Empty string as hash means password is not required */
-	if (sp->sp_pwdp[0] == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	if (ed->password == NULL)
-		return MOSQ_ERR_AUTH;
-
-	memset(&data, 0, sizeof(data));
-	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
-
-	if (hash == NULL)
-		return MOSQ_ERR_AUTH;
-
-	if (strcmp(hash, sp->sp_pwdp) == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	return MOSQ_ERR_AUTH;
-}
-
-int mosquitto_plugin_version(int supported_version_count,
-			     const int *supported_versions)
-{
-	return 5;
-}
-
-int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
-			  void **user_data,
-			  struct mosquitto_opt *opts, int opt_count)
-{
-	*user_data = identifier;
-
-	return mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
-					   basic_auth_callback, NULL, NULL);
-}
-
-int mosquitto_plugin_cleanup(void *user_data,
-			     struct mosquitto_opt *opts, int opt_count)
-{
-	mosquitto_plugin_id_t *identifier = user_data;
-
-	return mosquitto_callback_unregister(identifier, MOSQ_EVT_BASIC_AUTH,
-					     basic_auth_callback, NULL);
-}

netmode/files/etc/init.d/netmode

@@ -34,13 +34,12 @@ start_service() {
 	[ -n "$mode" ] || return
 
 	# Get the last saved mode
-	lastmode="$(cat $MODEDIR/.last_mode 2>/dev/null)"
+	lastmode="$(cat /etc/netmodes/.last_mode 2>/dev/null)"
 	# Return if desired mode is same as last saved mode
 	[ "$mode" == "$lastmode" ] && return
 
 	# Save mode as last mode
-	[ -d $MODEDIR ] || mkdir -p $MODEDIR
-	echo "$mode" > $MODEDIR/.last_mode
+	echo "$mode" > /etc/netmodes/.last_mode
 
 	logger -s -p user.info -t "netmode" "Switching to $mode Mode" >/dev/console
 

obuspa/Config.in

@@ -21,9 +21,5 @@ config OBUSPA_MTP_ENABLE_STOMP
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
 	default n
-
-config OBUSPA_CONTROLLER_MTP_VERIFY
-	bool "Enable verification of MQTT response topic before processing the message"
-	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=5.0.0.21
+PKG_VERSION:=5.0.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=9d957848b9ac1d381149ce43b59775c21b1e24e0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE_VERSION:=c71da7f9b66f4d7fd240e6eb7078044c6b43b72b
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -31,7 +31,7 @@ define Package/obuspa
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=USP agent
-  DEPENDS:=+libopenssl +libuci +libblobmsg-json +libcurl +libsqlite3 +libubox +libubus +libmosquitto-ssl +libwebsockets-openssl
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto-ssl +libwebsockets-openssl
 endef
 
 define Package/obuspa/description
@@ -43,14 +43,11 @@ define Package/obuspa/config
 endef
 
 TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
 	-D_GNU_SOURCE \
 	-Wall \
 	-Werror
 
-ifneq ($(CONFIG_OBUSPA_CONTROLLER_MTP_VERIFY),)
-  TARGET_CFLAGS += -DOBUSPA_CONTROLLER_MTP_VERIFY
-endif
-
 ifneq ($(CONFIG_OBUSPA_DB_PATH),)
   CONFIGURE_ARGS += \
 	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
@@ -99,16 +96,11 @@ define Package/obuspa/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/obuspa
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
 	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
 	$(INSTALL_DATA) ./files/etc/obuspa/roles.json $(1)/etc/obuspa/roles.json
 	$(INSTALL_DATA) ./files/etc/obuspa/dmcaching_exclude.json $(1)/etc/obuspa/dmcaching_exclude.json
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/USPAgent.json $(1)/etc/bbfdm/json/USPAgent.json
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/TransferComplete.json $(1)/etc/bbfdm/json/TransferComplete.json
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,17 +1,30 @@
 config obuspa 'global'
 	option enabled '1'
+	option interface 'loopback'
+	#option ifname 'lo'
 	option debug '1'
 	option log_level '1'
-	option prototrace '1'
-	option db_file '/etc/obuspa/usp.db'
+	option prototrace '0'
+	#option db_file '/etc/obuspa/usp.db'
 	#option role_file '/etc/obuspa/roles.json'
 	option dm_caching_exclude '/etc/obuspa/dmcaching_exclude.json'
 	#option trust_cert '/etc/obuspa/rootCA.pem'
 	#option client_cert '/etc/obuspa/client.pem'
 	#option log_dest '/var/log/obuspa'
 
+config localagent 'localagent'
+	option Enable '1'
+
+# Adds Device.LocalAgent.Controller.
+config controller 'localcontroller'
+	option EndpointID 'proto::interop-usp-controller'
+	option Protocol 'MQTT'
+	option Topic '/usp/controller'
+	option mqtt 'localmqtt'
+	option assigned_role_name 'full_access'
+
 # Adds Device.LocalAgent.MTP.
-config mtp 'agent_mtp'
+config mtp
 	option Protocol 'MQTT'
 	option ResponseTopicConfigured '/usp/endpoint'
 	option mqtt 'localmqtt'
@@ -22,30 +35,13 @@ config mqtt 'localmqtt'
 	option BrokerPort '1883'
 	option TransportProtocol 'TCP/IP'
 
-# Adds Device.LocalAgent.Controller.
-config controller 'localcontroller'
-	option EndpointID 'proto::interop-usp-controller'
-	option Protocol 'MQTT'
-	option Topic '/usp/controller'
-	option mqtt 'localmqtt'
-	option assigned_role_name 'full_access'
-
 # Add Device.LocalAgent.Subscription.
-#config subscription 'sub_event'
-#    option ID 'uci-sub-events'
-#    option NotifType 'Event'
-#    list ReferenceList 'Device.Boot!'
-#    list ReferenceList 'Device.LocalAgent.TransferComplete!'
-#    option Persistent 'true'
-#    option controller 'localcontroller'
-
-#config subscription 'sub_op_comp'
-#   option ID 'uci-sub-op_complete'
-#   option NotifType 'OperationComplete'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Download()'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Activate()'
-#   option Persistent 'true'
-#   option controller 'localcontroller'
+config subscription
+	option ID 'default-boot-event-ACS'
+	option NotifType 'Event'
+	option ReferenceList 'Device.Boot!'
+	option Persistent 'true'
+	option controller 'localcontroller'
 
 #config challenge 'admin'
 #	option Description 'Request to get Administrative access'

obuspa/files/etc/obuspa/dmcaching_exclude.json

@@ -1,7 +1,6 @@
 {
   "dmcaching_exclude": [
     "Device.DeviceInfo.ProcessStatus.Process.",
-    "Device.Hosts.Host.",
-    "Device.WiFi.DataElements."
+    "Device.Hosts.Host."
   ]
 }

obuspa/files/etc/uci-defaults/01-fix-upgrade-uci

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-fix_stomp_section() {
-	local encryption
-
-	config_get_bool encryption $1 encryption ""
-	if [ -n "${encryption}" ]; then
-		uci_set obuspa $1 encryption ""
-		uci_set obuspa $1 EnableEncryption "$encryption"
-	fi
-}
-
-# fix the stomp encryption parameter
-config_load obuspa
-config_foreach fix_stomp_section stomp
-uci_commit

periodicstats/Makefile

@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=periodicstats
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6c68428405bc88a9990e855f911aecc86f07f4a8
+PKG_SOURCE_VERSION:=7426c7458f792cc66920c206d62869c5620f1400
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/periodicstats.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -20,15 +20,13 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
-PKG_BUILD_DEPENDS:=bbf
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/periodicstats
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Periodic Statistics Daemon
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbf_api
 endef
 
 define Package/periodicstats/description
@@ -37,7 +35,7 @@ endef
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-        $(CP) -rf ~/git/periodicstats/* $(PKG_BUILD_DIR)/
+        $(CP) -rf ./periodicstats/* $(PKG_BUILD_DIR)/
 endef
 endif
 

periodicstats/files/etc/init.d/periodicstats

@@ -11,12 +11,9 @@ service_running() {
 }
 
 start_service() {
-	local enable
+	enable=$(uci -q get periodicstats.globals.enable)
 
-	config_load periodicstats
-	config_get_bool enable globals enable 1
-
-	if [ "${enable}" -ne "1" ]; then
+	if [ "$(enable)" != "1" ]; then
 		return 0;
 	fi
 
@@ -27,7 +24,7 @@ start_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger periodicstats
+	procd_add_reload_trigger periodicstats uspd
 }
 
 reload_service() {

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.6
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=21522c2003b8c61904acc61ff97e54fc9b0c3c92
+PKG_SOURCE_VERSION:=15ba90f01914113e7c5e8f8a6df6279c882e8265
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

peripheral_manager/files/etc/init.d/ledmngr

@@ -1,62 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=20
-USE_PROCD=1
-
-setled() {
-	local enable
-	local brightness
-
-	config_get_bool enable $1 enable 1
-	config_get brightness $1 brightness 100
-	ubus call led.$1 set "{\"enable\":$enable,\"brightness\":$brightness}"
-}
-
-start_service() {
-	local enable
-
-	config_load leds
-	config_foreach setled led
-	config_get_bool enable leds enable 1
-
-	if [ "$enable" == "0" ]; then
-		ubus call leds set  '{"state" : "alloff"}'
-	else
-		ubus call leds set  '{"state" : "normal"}'
-	fi
-}
-
-boot() {
-	local led ledname
-
-	ubus list led* >/dev/null || sleep 1
-	ubus list led* >/dev/null || sleep 1
-
-	[ -f /etc/config/leds ] || touch /etc/config/leds
-
-	if ! uci -q get leds.leds >/dev/null; then
-		uci set leds.leds=leds
-		uci set leds.leds.enable=1
-	fi
-
-	for led in $(ubus list led.*); do
-		ledname=${led:4}
-		case $ledname in
-			*phy*) continue ;;
-		esac
-		if ! uci -q  get leds.$ledname >/dev/null; then
-			uci set leds.$ledname=led
-			uci set leds.$ledname.enable=1
-		fi
-	done
-
-	uci commit leds
-
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "leds"
-}
-

ponmngr/Makefile

@@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ponmngr
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
@@ -17,12 +17,11 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/ponmngr
 	CATEGORY:=Utilities
-	TITLE:=PON Manager
-	DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet)
+	TITLE:=ponmngr packets manager daemon
 endef
 
 define Package/ponmngr/description
-	Configures PON
+	Configures pon
 endef
 
 #define Build/Prepare
@@ -33,12 +32,7 @@ define Build/Compile
 endef
 
 define Package/ponmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_iopsys_econet),)
-	$(CP) ./files/airoha/* $(1)/
-endif
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,ponmngr))

ponmngr/files/airoha/lib/xpon/airoha.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_serial_number() {
-	vendor_id=$1
-	vssn=$2
-
-	/userfs/bin/omcicfgCmd set sn ${vendor_id}${vssn}
-}
-
-init_xpon() {
-	procd_open_instance ponmgr_cfg
-	procd_set_param command /userfs/bin/ponmgr_cfg
-	procd_close_instance
-	procd_open_instance omci
-	procd_set_param command /userfs/bin/omci
-	procd_close_instance
-}
-
-deinit_xpon() {
-	killall -9 omci 2>/dev/null
-	killall -9 ponmgr_cfg 2>/dev/null
-}
-

ponmngr/files/broadcom/lib/xpon/broadcom.sh

@@ -1,30 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_serial_number() {
-	vendor_id=$1
-	vssn=$2
-
-	vendor_id="$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')"
-	vendor_id=${vendor_id:0:8}
-
-	bs /b/c gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vssn}
-}
-
-init_xpon() {
-	procd_open_instance pon_msgd
-	procd_set_param command bcm_msgd -c gpon
-	procd_close_instance
-
-	procd_open_instance pon_daemon
-	procd_set_param command omcid start -n
-	procd_set_param respawn
-	procd_close_instance
-}
-
-deinit_xpon() {
-	# stopping omcid does not bring down the pon link, which should happen
-	# if ANI is disabled or stopped (go to O1)
-	gponctl stop
-}

ponmngr/files/common/etc/init.d/xpon

@@ -1,38 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=19
-STOP=91
-
-USE_PROCD=1
-
-. /lib/functions.sh
-include /lib/xpon
-
-configure_serial_number() {
-	serial_number="$(uci -q get xpon.ani.serial_number)"
-	if [ ${#serial_number} -eq 12 ]; then
-		vendor_id="${serial_number:0:4}"
-		vssn="${serial_number:4:8}"
-	else
-		macaddr="$(fw_printenv -n ethaddr | tr -d ':' | tr 'a-z' 'A-Z')"
-		vendor_id="IOPS"
-		vssn="${macaddr:4:8}"
-	fi
-
-	set_serial_number $vendor_id $vssn
-}
-
-start_service() {
-	if [ "$(uci -q get xpon.ani.enable)" == "1" ]; then
-		configure_serial_number
-		init_xpon
-	fi
-}
-
-stop_service() {
-	deinit_xpon
-}
-
-service_triggers() {
-	procd_add_reload_trigger "xpon"
-}

ponmngr/files/common/etc/uci-defaults/60-xpon-generate

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-if [ -s "/etc/config/xpon" ]; then
-        if uci -q get xpon.ani >/dev/null; then
-                # return if there is any valid content
-                exit                                  
-        else                                          
-                rm -f /etc/config/xpon
-        fi                           
-fi                                   
-touch /etc/config/xpon
-                     
-                          
-uci set xpon.ani=ani
-uci set xpon.ani.enable="1"
-                                           
-uci commit xpon  

ponmngr/files/etc/init.d/pon

@@ -0,0 +1,36 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=ponmngr
+PROG="/usr/sbin/omcid start"
+
+include /lib/pon
+
+
+start_service() {
+       if [ -f "/etc/config/pon" ]; then
+		procd_open_instance $NAME
+		procd_set_param command ${PROG}
+		procd_set_param respawn
+		procd_close_instance
+                start_gpon
+       fi
+}
+
+boot() {
+        start
+}
+
+stop_service() {
+	service_stop ${PROG}
+        stop_gpon
+}
+
+reload_service() {
+        stop
+        start
+}
+

ponmngr/files/etc/uci-defaults/60-pon-generate

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+basemac="$(db -q get hw.board.basemac | tr -d ':')"
+             
+if [ -s "/etc/config/pon" ]; then
+        if uci -q get pon.globals >/dev/null; then
+                # return if there is any valid content
+                exit                                  
+        else                                          
+                rm -f /etc/config/pon
+        fi                           
+fi                                   
+touch /etc/config/pon
+                     
+mac=''               
+if [ -z "$basemac" ]; then
+        mac="12345678"    
+else                      
+        # read last 8 characters of basemac without :
+        mac=${basemac: -8}                           
+fi                                                   
+                          
+uci set pon.globals=globals
+uci set pon.globals.enabled="1"
+uci set pon.globals.serial_number="BRCM$mac"
+                                           
+uci commit pon  

ponmngr/files/lib/pon/broadcom.sh

@@ -0,0 +1,70 @@
+#!/bin/sh
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+configure_snpwd() {
+        local serial_no password
+        serial_no="$1"
+        password="$2"
+
+        # serial number comprises of 2 parts, vendor id and vendor specific, the vendor id is
+        # a string while the vendor specific is a hex, so split the 2 and set accordingly
+        local vendor_id vendor_specific
+        vendor_id=${serial_no:0:4}
+        vendor_specific=${serial_no: -8}
+
+        # attempt to conver vendor_id from string to hex
+	vendor_id=$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')
+	vendor_id=${vendor_id:0:8}
+
+        bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vendor_specific}
+        if [ -n "$password" ]; then
+		password=$(echo $password | hexdump -n ${#password} -e '16/1 "%02X""\n"')
+                bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon password=$password
+        fi
+}
+
+configure_gpon() {
+        local enabled serial_no password
+        config_load pon
+        config_get enabled globals "enabled"
+
+	if [ "$enabled" == "0" ]; then
+		exit
+        fi
+
+        config_get serial_no globals "serial_number"
+        config_get password globals "password"
+
+        configure_snpwd $serial_no $password
+}
+
+start_gpon() {
+        if [ -n "$(which gponctl)" ]; then
+                configure_gpon
+                gponctl start
+        fi
+}
+
+stop_gpon() {
+        if [ -n "$(which gponctl)" ]; then
+                gponctl stop
+        fi
+}
+
+get_gpon_status() {
+        json_init
+        status="$(gponctl getstate)"
+        admin_status="$(echo $status | head -n1 | awk '{print $8;}')"
+        json_add_string "admin_status" "$admin_status"
+        op_status="$(echo $status | head -n1 | awk '{print $12;}')"
+        case $op_status in
+        NUMBER)
+                op_status="$(echo $status | head -n1 | awk '{print $13;}')"
+                ;;
+        esac
+
+        op_status=${op_status:1:2}
+        json_add_string "operational_status" "$op_status"
+        json_dump
+}

ponmngr/files/usr/libexec/rpcd/pon

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+include /lib/pon
+
+case "$1" in
+	list)
+		echo '{ "status": {} }'
+		;;
+	call)
+		case "$2" in
+			status)
+				get_gpon_status
+				;;
+		esac
+		;;
+esac
+

port-management/files/etc/uci-defaults/15-ports-config-generate

@@ -1,20 +1,16 @@
 #!/bin/sh
 
 populate_config_from_db() {
-	. /lib/functions.sh
-	include /lib/network
+	. /lib/network/utils.sh
 
 	portorder="$(db -q get hw.board.ethernetPortOrder)"
 	for port in $portorder; do
-		speed="$(get_max_port_speed $port 2>/dev/null)"
-		speed="${speed:-1000}"
-
 		uci add ports ethport
 		uci rename ports.@ethport[-1]="$(get_port_name $port)"
 		uci set ports.@ethport[-1].enabled=1
 		uci set ports.@ethport[-1].name="$(get_port_name $port)"
 		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].speed=1000
 		uci set ports.@ethport[-1].duplex="full"
 		uci set ports.@ethport[-1].autoneg=1
 		uci set ports.@ethport[-1].eee=0
@@ -30,25 +26,17 @@ populate_config_from_db() {
 }
 
 populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
+	for port in $(find /proc/device-tree/ -name "port@*"); do
+		port="$(cat $port/label)"
 		[ -n "$port" ] || continue
 		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
 		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
 		uci add ports ethport
 		uci rename ports.@ethport[-1]="$PORT"
 		uci set ports.@ethport[-1].enabled=1
 		uci set ports.@ethport[-1].name="$PORT"
 		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].speed=1000
 		uci set ports.@ethport[-1].duplex="full"
 		uci set ports.@ethport[-1].autoneg=1
 		uci set ports.@ethport[-1].eee=0
@@ -73,7 +61,7 @@ fi
 
 touch /etc/config/ports
 
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
+if [ -f /sbin/db ] && [ -f /etc/board-db/config/hw ]; then
 	populate_config_from_db
 elif [ -d /proc/device-tree/ ]; then
 	populate_config_from_device_tree

qosmngr/Makefile

@@ -27,7 +27,7 @@ define Package/qosmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=QoS Manager
-  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet) +libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos
+  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm) +libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos
 endef
 
 define Package/qosmngr/description