iopsys-econet: Take mapagent from econet-devel

Needed for netdev patch that is not delivered yet.

Signed-off-by: Bartlomiej Grzeskowiak <bartlomiej.grzeskowiak@iopsys.eu>

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.4.27
+PKG_VERSION:=6.6.1
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=710485a57e311a5b4c5434efe3e79fc58cb6c429
+PKG_SOURCE_VERSION:=4eff4ace6eb798c499a89252ffee1cda5aef135f
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

crashlog/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crashlog
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crashlog
-  CATEGORY:=Utilities
-  TITLE:=Handling kernel crash logs
-endef
-
-define Package/crashlog/description
-	Handling kernel crash logs.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/crashlog/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -1,11 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-
-start()
-{
-    if [ -e /proc/sys/kernel/core_pattern ]
-    then
-	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
-    fi
-}

crashlog/files/etc/init.d/crashlog

@@ -1,55 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-send_log()
-{
-	nr=$(db get hw.board.serial_number)
-	hw=$(db get hw.board.model_name)
-	fam=$(db get hw.board.iopVerFam)
-	sw=$(db get hw.board.iopVersion)
-	server=$(/sbin/uci get system.crashlog.server)
-
-	while true
-	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
-	    if [ $? == 0 ]
-	    then
-	       break;
-	    fi
-	    # wait for another minute then try again
-	    sleep 60
-	done
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=crashlog
-    /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
-    /sbin/uci commit
-}
-
-boot()
-{
-    # is crashlog enabled ?
-    enable=$(/sbin/uci get system.crashlog.enable)
-    case $enable in
-	0|no|NO|false|FALSE)
-	    exit 0
-	    ;;
-	"")
-	    fill_in_default
-	    exit 0
-	    ;;
-    esac
-
-    # is this boot a result from a crash ?
-    reason=$(cat /etc/boot_reason)
-    case $reason in
-	HW|WD)
-	    send_log&
-	    ;;
-    esac
-}

crashlog/files/sbin/logcore

@@ -1,60 +0,0 @@
-#! /bin/sh
-
-TMP_CORE=/tmp/new_core
-# first test if we can contact the log server.
-# if not abort directly the core file takes up memory
-alive()
-{
-	ping -c1 $server
-
-	if [ $? != 0 ]
-	then
-		# drain core file from kernel
-		cat >/dev/null
-		exit 0
-	fi
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=corelog
-    /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
-    /sbin/uci commit
-}
-
-# is corelog enabled ?
-enable=$(/sbin/uci get system.corelog.enable)
-case $enable in
-    0|no|NO|false|FALSE)
-	# drain core file from kernel
-	cat >/dev/null
-	exit 0
-	;;
-    "")
-	fill_in_default
-	exit 0
-	;;
-esac
-
-server=$(/sbin/uci get system.corelog.server)
-
-alive
-
-# dump out the core to disk we need this as scp needs a size before we send data
-# and this is the only way to know how much data there is
-cat >$TMP_CORE
-
-# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
-# more memory to work with. normally this would do nothing.
-cat >/dev/null
-
-nr=$(db get hw.board.serial_number)
-hw=$(db get hw.board.model_name)
-fam=$(hw.board.iopVerFam)
-sw=$(db get hw.board.iopVersion)
-
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
-rm $TMP_CORE
-

crashlog/files/usr/sbin/logssh

@@ -1,6 +0,0 @@
-#!/bin/sh
-# we need to have the -y option to dropbear to not halt the scp when
-# transfering the log file to a new server for the first time.
-# since we already need this also put in the keyfile
-
-ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -1,42 +0,0 @@
-Install scp server.
-
-Create a user account on a server and make sure it's possible to login to it
-using ssh.
-
-For now the user has to be called "log"
-
-USER is the user name of the account
-HOME is the user home directory.
-Both should be changed to the correct value in all following example commands.
-
-create HOME/bin
-Put scp_upload in HOME/bin
-make it executable "chmod a+x HOME/bin/scp_upload" 
-
-create home/.ssh   (observer the dot .shh)
-
-create an empty file HOME/.ssh/authorized_keys
-
--------------------------------
-Now everyhting is setup for use but we have not added any clients.
-What we need is the public key for the clients.
-
-For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
-
-----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
-----------
-
-The public key should be just one line. Add that line to the 
-HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
-the first text on the same line. that is insert before the key data.
-
-command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
-
-Do not forget to change HOME to the correct value for the server and there 
-should be one space separating the key data and the above text.
----------------------------------
-Now test to make sure that you can upload new files, not download files
-and not overwrite files from the client.
-
-

crashlog/scp_upload

@@ -1,53 +0,0 @@
-#! /bin/bash
-# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
-
-val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
-if [ $val != 3 ]
-then
-    echo "only scp is allowed for this rsa key"
-    exit 1
-fi
-
-#strip out "scp" as getopts barf on anything not an option
-
-args=${SSH_ORIGINAL_COMMAND:3}
-
-# we must set args to positional paramters otherwise it's next to impossible
-# to get to the rest of the line that is not arguments.
-
-set -- $args
-while getopts "rftdvpq" Option
-do
-  case $Option in
-    r ) echo "recursive not allowed";exit 1;;
-    f ) echo "reading files not allowed";exit 1;;
-    t ) ;;
-    d ) ;;
-    v ) ;;
-    p ) ;;
-    q ) ;;
-    * ) ;;   # Default.
-  esac
-done
-
-shift $(($OPTIND - 1))
-
-file="$*"
-dir=$(dirname "$file")
-
-if [ "$dir" != "log" ]
-then
-    echo "only allowed to write to log/"
-    exit 1
-fi
-
-# try to create uniq files
-EXTRA=$((0))
-while [ -e "${file}_${EXTRA}" ]
-do
-    EXTRA=$((EXTRA +1))
-done
-
-logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
-
-exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Makefile

@@ -53,6 +53,7 @@ endif
 
 TARGET_CFLAGS += \
 	-Wall \
+        -Werror \
 	-I$(STAGING_DIR)/usr/include/libxml2
 
 ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)

dectmngr/files/etc/config/dect

@@ -1,3 +1,2 @@
 config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'
+	option log_dect_cmbs 'syslog'

easy-soc-libs/Makefile

@@ -7,7 +7,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.4.40
+PKG_VERSION:=6.4.35
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
@@ -32,6 +32,7 @@ define Package/easy-soc-libs
   CATEGORY:=Libraries
   TITLE:=IOPSYS Easy SoC libraries
   SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
   MENU:=1
 endef
 
@@ -78,6 +79,7 @@ endif
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=3a71d4124061287783e0d4c763b1b20e925d2133
+PKG_SOURCE_VERSION:=94df920d39e8589c7ac7f5523bf372d48ef24c5e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -56,6 +56,10 @@ define Build/Prepare
 endef
 endif
 
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
+
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin

gryphon-led-module/Makefile

@@ -45,12 +45,12 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
 	MODULES_SUBDIR:=lib/modules/4.19.183
-	TARGET_CROSS:=$(CONFIG_BCM_TOOLCHAIN)/bin/$(CONFIG_BCM_TOOLTUPLE)
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
-		TARGET_CROSS:=/opt/toolchains/crosstools-aarch64-gcc-9.2-linux-4.19-glibc-2.30-binutils-2.32/bin/aarch64-buildroot-linux-gnu-
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

ieee1905/Config.map-plugin.in

@@ -1,14 +0,0 @@
-if (PACKAGE_map-plugin)
-
-menu "Configurations"
-
-config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-	bool "Sync configuration between dynamic controllers in the network"
-	default n
-
-config MULTIAP_FUZZ_1905_CMDUS
-	bool "Include support to fuzz 1905 CMDUs for testing purpose"
-	default n
-
-endmenu
-endif

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.6.19
+PKG_VERSION:=4.6.10
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7267a76fafa264792415a1cdc697a9e47934a1e6
+PKG_SOURCE_VERSION:=67412a55087a932a2127a062faf9183d2848b940
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -38,7 +38,7 @@ define Package/libieee1905
 $(call Package/ieee1905/Default,$(1))
   TITLE+= (library for CMDU and TLV handling)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +libopenssl
+	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
@@ -57,10 +57,6 @@ $(call Package/ieee1905/Default,$(1))
 	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
 endef
 
-define Package/map-plugin/config
-  source "$(SOURCE)/Config.map-plugin.in"
-endef
-
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
 endef
@@ -72,18 +68,12 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/openssl \
 	-D_GNU_SOURCE
 
 ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
 TARGET_CFLAGS += -DHAS_WIFI
 endif
 
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-
 MAKE_PATH:=src
 
 
@@ -130,6 +120,7 @@ define Build/InstallDev/libieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef

iop/config

@@ -1,32 +1,139 @@
-CONFIG_BUSYBOX_CUSTOM=y
+############
+# Generic #
+##########
+
+# Build #
+CONFIG_BUILD_LOG=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+# CONFIG_SIGNED_PACKAGES is not set
+
+# Image #
+CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_ROOTFS_TARGZ=y
+
+# /etc/banner and /etc/device_info #
+CONFIG_IMAGEOPT=y
+CONFIG_VERSIONOPT=y
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
+CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
+
+# /lib/preinit #
+CONFIG_PREINITOPT=y
+# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
+CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
+CONFIG_TARGET_PREINIT_TIMEOUT=1
+# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
+# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
+CONFIG_TARGET_PREINIT_IFNAME=""
+CONFIG_TARGET_PREINIT_IP=""
+CONFIG_TARGET_PREINIT_NETMASK=""
+CONFIG_TARGET_PREINIT_BROADCAST=""
+
+# Mirror #
+CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
+
+
+##################
+# IOWRT Add-ons #
+################
+
+# EasySoC HAL #
+CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_wifimngr=y
+
+# Multi-AP #
+CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_wfadatad=y
+CONFIG_PACKAGE_wfadatad-collector=y
+
+# Network #
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_owsd=m
+CONFIG_PACKAGE_urlfilter=y
+
+# System #
+CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rulengd=y
+
+# TR-x69 #
+CONFIG_PACKAGE_uspd=y
+CONFIG_PACKAGE_icwmp=y
+CONFIG_PACKAGE_obuspa=y
+CONFIG_PACKAGE_bulkdata=y
+CONFIG_PACKAGE_periodicstats=y
+CONFIG_PACKAGE_stunc=m
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_twamp=m
+CONFIG_PACKAGE_udpechoserver=m
+CONFIG_PACKAGE_xmppc=m
+
+# WebGUI #
+CONFIG_PACKAGE_sulu=y
+
+
+############
+# Network #
+##########
+
+# Protocols #
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_atftp=m
-CONFIG_PACKAGE_atftpd=m
-CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_gre=y
-CONFIG_PACKAGE_icwmp=y
-CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_map=y
+CONFIG_PACKAGE_ntfs-3g=y
+CONFIG_PACKAGE_ntpd=y
+CONFIG_PACKAGE_odhcp6c=y
+CONFIG_PACKAGE_odhcpd=y
+CONFIG_PACKAGE_ppp-mod-pppoa=y
+CONFIG_PACKAGE_ppp-mod-pppoe=y
+CONFIG_PACKAGE_ppp-mod-pppol2tp=y
+CONFIG_PACKAGE_ppp-mod-pptp=y
+CONFIG_PACKAGE_ppp-multilink=y
+# CONFIG_PACKAGE_ppp is not set
+CONFIG_PACKAGE_relayd=y
+CONFIG_PACKAGE_umbim=y
+CONFIG_PACKAGE_uqmi=y
+CONFIG_PACKAGE_wwan=y
+CONFIG_PACKAGE_xl2tpd=y
+
+# Services #
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
+CONFIG_PACKAGE_ddns-scripts=y
+CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
-CONFIG_PACKAGE_wfadatad=y
-CONFIG_PACKAGE_wfadatad-collector=y
-CONFIG_PACKAGE_imonitor=m
-CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_mwan3=y
+CONFIG_PACKAGE_nginx=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_vsftpd-tls=m
+
+# Tools and Utilities #
+CONFIG_PACKAGE_curl=y
+CONFIG_PACKAGE_libcurl=y
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+# CONFIG_LIBCURL_MBEDTLS is not set
+CONFIG_LIBCURL_OPENSSL=y
+CONFIG_PACKAGE_ethtool=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
@@ -34,73 +141,67 @@ CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_traceroute6=y
+
+
+############
+# System  #
+##########
+
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_getopt=y
 # CONFIG_PACKAGE_iwatchdog is not set
 CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libreswan=m
-CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_libustream-openssl=y
+# CONFIG_PACKAGE_libustream-wolfssl is not set
 CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_luci-nginx=y
+CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_OPENSSL_WITH_COMPRESSION=y
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-rpcsys=y
+CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_uledd=y
+# The urandom-seed package is very strange. It seeds urandom with urandom...
+# Disable it. Most SoCs nowadays has HW random generators anyway.
+# CONFIG_PACKAGE_urandom-seed is not set
+# CONFIG_PACKAGE_urngd is not set
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_uuidgen=y
+CONFIG_PACKAGE_zoneinfo-core=y
+CONFIG_PACKAGE_zoneinfo-europe=y
+
+
+################
+# LuCI WebGUI #
+##############
+
+# BEGIN: luci-nginx metapackage with some changes
+# We do not want libiwinfo-lua on non-WiFi targets, but it is already
+# depended on by other luci-packages, so no need to take it in explicitly
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-opkg=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
 # CONFIG_LUCI_JSMIN is not set
 # CONFIG_LUCI_CSSTIDY is not set
 CONFIG_PACKAGE_luci-mod-dashboard=y
 CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-CONFIG_PACKAGE_map=y
-CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
-CONFIG_PACKAGE_odhcp6c=y
-CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_PACKAGE_owsd=y
-CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
-CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppoe=y
-CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
-CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rpcd-mod-rpcsys=y
-CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_sulu=y
-CONFIG_PACKAGE_swmodd=m
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_uledd=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_urlfilter=y
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_vsftpd-tls=m
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_wifimngr=y
-CONFIG_PACKAGE_uuidgen=y
-CONFIG_PACKAGE_xl2tpd=y
-CONFIG_PACKAGE_zoneinfo-core=y
-CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-CONFIG_BUILD_LOG=y
+CONFIG_PACKAGE_nginx-mod-luci=y
+
+
+############
+# BusyBox #
+##########
+
+CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
@@ -120,6 +221,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_BUSYBOX_CONFIG_IP is not set
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
@@ -183,40 +285,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_SIGNED_PACKAGES is not set
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
-
-# Generation of /etc/banner.
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-
-# Disable as much as possible of OpenWrt messy "pre-init" stuff.
-CONFIG_PREINITOPT=y
-# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
-CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
-CONFIG_TARGET_PREINIT_TIMEOUT=1
-# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
-# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
-CONFIG_TARGET_PREINIT_IFNAME=""
-CONFIG_TARGET_PREINIT_IP=""
-CONFIG_TARGET_PREINIT_NETMASK=""
-CONFIG_TARGET_PREINIT_BROADCAST=""
-
-# Generate rootfs tar file
-CONFIG_TARGET_ROOTFS_TARGZ=y
-
-# The urandom-seed package is very strange. It seeds urandom with urandom...
-# Disable it. Most SoCs nowadays has HW random generators anyway.
-# CONFIG_PACKAGE_urandom-seed is not set
-# CONFIG_PACKAGE_urngd is not set
-
-# We use OpenSSL, no need to ship multiple TLS libraries
-CONFIG_PACKAGE_libustream-openssl=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set

libjwt/Makefile

@@ -1,54 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-PKG_LICENSE:=LGPLv3
-PKG_LICENSE_FILES:=COPYING
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

map-agent/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_map-agent)
-
-menu "Configurations"
-
-config AGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-endmenu
-endif

map-agent/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=7.1.10
+PKG_VERSION:=7.1.4
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=8d2fa1af3b0cbdb65f791b490e72c5925cccaa05
+PKG_SOURCE_VERSION:=econet-devel
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
@@ -50,7 +50,7 @@ define Package/dynbhd/description
 endef
 
 define Package/map-agent/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
@@ -58,10 +58,6 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DAGENT_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
 MAKE_PATH:=src
 
 define Package/map-agent/install

map-agent/files/lib/wifi/multiap

@@ -464,7 +464,7 @@ brcm_bsta_to_wireless() {
 				uci -q set wireless.${section}.key="$key"
 				uci -q set wireless.${section}.encryption=$encryption
 				uci -q set wireless.${section}.bssid="$bssid"
-				#uci -q set wireless.${section}.disabled=$disabled
+				uci -q set wireless.${section}.default_disabled='0'
 
 				[ "$disabled" != "1" ] && return
 				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
@@ -622,21 +622,37 @@ sync_mapcontroller_from_wireless() {
 }
 
 bsta_scan_on_enabled() {
-	config_load mapagent
+	local onboarded_bands=""
+
+	mapagent_onboarded_bands() {
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onboarded" = "0" ] && return
+
+		onboarded_bands="$onboarded_bands $band"
+	}
 
 	mapagent_enable_bk() {
 		config_get ifname $1 ifname
+		config_get band $1 band
 		config_get enabled $1 enabled
 
-		echo ifname $ifname enabled $enabled
-
 		[ "$enabled" = "0" ] && return
 
-		wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
-		wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		for onboarded_band in $onboarded_bands
+		do
+			[ "$onboarded_band" != "$band" ] && continue
+
+			logger -t multiap "bsta_scan_on_enabled $ifname $band"
+			wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
+			wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
+			wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		done
 	}
 
+	config_load mapagent
+	config_foreach mapagent_onboarded_bands bsta
 	config_foreach mapagent_enable_bk bsta
 }
 
@@ -777,6 +793,23 @@ unset_uplink() {
 	rm "$MAPFILE" > /dev/null 2>&1
 }
 
+set_start_disabled() {
+	local value=$1
+
+	mapagent_set_start_disabled() {
+		local section=$1
+		local value=$2
+
+		config_get ifname $section ifname
+
+		hostapd_cli -i "$ifname" set start_disabled $value
+		hostapd_cli -i "$ifname" reload
+	}
+
+	config_load mapagent
+	config_foreach mapagent_set_start_disabled ap $value
+}
+
 func=$1
 shift
 
@@ -801,6 +834,7 @@ case "$func" in
 	set_uplink) set_uplink $@;;
 	set_uplink_backhaul_info) set_uplink_backhaul_info $@;;
 	unset_uplink) unset_uplink $@;;
+	set_start_disabled) set_start_disabled $@;;
 	--help|help) usage;;
 	*) usage; exit 1;;
 esac

map-agent/files/lib/wifi/traffic_separation

@@ -64,26 +64,21 @@ EOF
 			iface=$1				# real iface
 			vid=$2					# Vlan ID
 			bridge=$3				# bridge iface should be connected
-			vlan_dev=$4
-
 			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+			vlan_dev=${iface}_vlan${vid}		# name of vlan device to create
 
 			# remove interface from bridge if it is in one
 			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
 
-			# (re)create vlan device
-			ip link show $vlan_dev && vlanctl --if-delete $vlan_dev
+			# create vlan device
+			ip link show $vlan_dev &> /dev/null && vlanctl --if-delete $vlan_dev &> /dev/null
 			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
 
-			vlanctl --if $iface --tx --tags 0 --default-miss-drop
-			vlanctl --if $iface --tx --tags 1 --default-miss-drop
-			vlanctl --if $iface --tx --tags 2 --default-miss-drop
-			vlanctl --if $iface --rx --tags 0 --default-miss-drop
-			vlanctl --if $iface --rx --tags 1 --default-miss-drop
-			vlanctl --if $iface --rx --tags 2 --default-miss-drop
-
 			# bring the vlan device up and add back to bridge if it was in one
 			brctl addif $bridge $vlan_dev &> /dev/null
+			ip link set $vlan_dev up
+
+			echo $vlan_dev
 		}
 
 		ts_create_fh() {
@@ -99,32 +94,59 @@ EOF
 			}
 
 			# create vlan device
-			#set_wireless_bridge $iface $bridge
-
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
+			set_wireless_bridge $iface $bridge
+			vlan_dev=$(_create_vlan_dev $iface $vid $bridge)
 
 			# add rules
+			# Note: removing these for now since these packets are read directly from the iface anyway
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x888e --set-rxif $vlan_dev --rule-append		# incoming EAPOL
 #			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
-
-			# EAPOL frames
-			vlanctl --if $iface --rx --tags 0 --filter-ethertype 34958 --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --rx --tags 1 --filter-ethertype 34958 --pop-tag --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --tx --tags 0 --filter-txif $vlan_dev --filter-ethertype 34958 --rule-append
-
-			# 8021q vlan id TAG/UNTAG
 			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
 			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
-
-			ip link set $iface up
-			ip link set $vlan_dev up
 		}
 
+# Note: Currently not used (will be needed for Profile 1)
 		ts_create_bh() {
 			iface=$1				# bh iface
 			vid=$2					# primary vid
 			profile=$3				# agent profile (1 or 2)
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
+
+			# create vlan device
+			vlan_dev=$(_create_vlan_dev $iface $vid)
+
+			# add rules
+			case "$profile" in
+				1 | profile_1 | profile1 | Profile_1 | Profile1)
+					vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --pop-tag --rule-append
+					;;
+				2 | profile_2 | profile2 | Profile_2 | Profile2)
+					vlanctl --if $iface --rx --tags 1 --set-rxif $vlan_dev --rule-append
+					vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --rule-append								# note: already default
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x893a --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing IEEE1905.1
+					vlanctl --if $iface --tx --tags 0 --filter-ethertype 0x888e --filter-txif $vlan_dev --push-tag --set-vid $vid 0 --rule-append	# note: outgoing EAPOL
+					;;
+				*)
+					ts_delete $iface
+					ts_usage
+					exit 1
+					;;
+			esac
+
+			set_wireless_bridge $iface $bridge
+		}
+
+		ts_create_bh_drv() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
 			bridge=$4				# bridge interface should be connected to
 
 			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
@@ -134,7 +156,7 @@ EOF
 				exit 1
 			}
 
-			#[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
+			[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
 
 			old_vid=$(wl -i $1 map_8021q_settings)
 			old_vid=${old_vid##* }
@@ -149,29 +171,28 @@ EOF
 			wl -i $iface up &> /dev/null
 		}
 
-		ts_create_lei() {
-			vid=$1					# primary vid
-			pbits=$2				# default pbits to apply
-			vlan_bridge=$3				# name of ts subsystem bridge
-			lan_bridge=$4				# name of node local bridge
+		ts_create_eth() {
+			iface=$1				# Multi-AP Logical Ethernet Interface
+			vid=$2					# primary vid
+			pbits=$3				# default pbits to apply
+			vlan_bridge=$4				# name of ts subsystem bridge
+			lan_bridge=$5				# name of node local bridge
 
-			[ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
 				cat <<EOF
 Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
 EOF
 				exit 1
 			}
 
-			ip link show lei &> /dev/null || {
-				ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-			}
+			ip link set lei down
+			ip link set lei_map down
 
-			old_vid=$(ip -d link show lei_lan | sed -n 's/vlan.*id \([0-9][0-9]*\) .*/\1/p')
+			old_bridge="$(_get_bridge lei_lan)"
+			[ -n "$old_bridge" ] && brctl delif $old_bridge lei_lan &> /dev/null
 
-			[ "$old_vid" != "$vid" ] && {
-				ip link del lei_lan
-				ip link add link lei name lei_lan type vlan id ${vid}
-			}
+			ip link show lei_lan || ip link del lei_lan
+			ip link add link lei name lei_lan type vlan id ${vid}
 
 			brctl addif ${lan_bridge} lei_lan &>/dev/null
 			brctl addif ${vlan_bridge} lei_map &>/dev/null
@@ -181,57 +202,6 @@ EOF
 			ip link set lei_lan up
 		}
 
-		_create_eth() {
-			iface=$1				# Multi-AP Logical Ethernet Interface
-			vid=$2					# primary vid
-			bridge=$3				# name of ts subsystem bridge
-			pbits=0
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ] || {
-				cat <<EOF
-Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
-EOF
-				exit 1
-			}
-
-			dbg create $@
-
-			ip link set $iface down
-
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
-
-			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
-			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
-
-			[ $# -le 3 ] && exit 0
-			shift 3
-
-			while [ -n "$1" ] ; do
-				vid=$1
-				vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append
-				vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append
-				shift
-			done
-
-			ip link set $iface up
-			ip link set $vlan_dev up
-		}
-
-		ts_create_eths() {
-			pvid=$1					# primary vid
-			bridge=$2				# name of ts subsystem bridge
-
-			shift 2
-			# TODO use ieee1905 bridge
-			for iface in $(uci get network.br_lan.ports) ; do
-				[ "$iface" = "lei_lan" ] && continue
-				_create_eth $iface $pvid $bridge $@
-				ubus call ieee1905 del_interface "{\"ifname\":\"$iface\"}"
-			done
-		}
-
 		ts_create_dhcp() {
 			local diff=""
 
@@ -379,9 +349,9 @@ EOF
 
 	case "$type" in
 		fh) ts_create_fh $@;;
-		bh) ts_create_bh $@;;
-		lei) ts_create_lei $@;;
-		eths) ts_create_eths $@;;
+#		bh) ts_create_bh $@;;
+		bh) ts_create_bh_drv $@;;
+		eth) ts_create_eth $@;;
 		dhcp) ts_create_dhcp $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;

map-controller/Config.in

@@ -1,10 +0,0 @@
-if (PACKAGE_map-controller)
-
-menu "Configurations"
-
-config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-	bool "Support Dynamic Controller configuration sync"
-	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-
-endmenu
-endif

map-controller/Makefile

@@ -5,9 +5,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=6.0.5
+PKG_VERSION:=6.0.3
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=3562b7f774e6dffda2e58ad2acb382fc439273fb
+PKG_SOURCE_VERSION:=132bc92f12dcc3c6584307c80eef012fc1f26c28
 
 PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
@@ -34,7 +34,7 @@ define Package/map-controller/description
 endef
 
 define Package/map-controller/config
-	source "$(SOURCE)/Config.in"
+	#source "$(SOURCE)/Config.in"
 endef
 
 TARGET_CFLAGS += \
@@ -44,10 +44,6 @@ TARGET_CFLAGS += \
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
-TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/

map-controller/files/etc/init.d/mapcontroller

@@ -39,8 +39,8 @@ validate_ap_section() {
 	uci_validate_section mapcontroller $section "${1}" \
 			'band:or("2", "5")' \
 			'ssid:string' \
-			'encryption:or("sae", "sae+aes", "psk2",
-				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \
+			'encryption:or("sae-mixed", "sae", "psk-mixed", "psk2", "psk",
+						   "wpa-mixed", "wpa2", "wpa", "none", "open")' \
 			'key:string' \
 			'vid:range(1,65535):1' \
 			'type:or("backhaul", "fronthaul", "combined")' \

map-topology/Makefile

@@ -6,11 +6,11 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=3.2.5
+PKG_VERSION:=3.2.4
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=ddf78cca217ebfa83733a532bdd2d17b6c3af54e
+PKG_SOURCE_VERSION:=55b4bae9338ffa19255756c20626228ca4f30ee2
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz

mqtt-ciotc/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

obuspa/Config.in

@@ -2,16 +2,24 @@ if PACKAGE_obuspa
 
 menu "Configuration"
 
-config OBUSPA_MTP_ENABLE_STOMP
-	bool "Enable STOMP as mtp protocol"
-	default y
+config OBUSPA_DB_PATH
+	string "Configure path for usp.db file"
+	default "/tmp/"
 
 config OBUSPA_MTP_ENABLE_MQTT
 	bool "Enable MQTT as mtp protocol"
 	default y
 
+config OBUSPA_MTP_ENABLE_WEBSOCKETS
+	bool "Enable WebSockets as mtp protocol"
+	default y
+
+config OBUSPA_MTP_ENABLE_STOMP
+	bool "Enable STOMP as mtp protocol"
+	default y
+
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
-	default y
+	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=4.1.0.18
+PKG_VERSION:=5.0.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=af3d4663d66942e3b0e3253375c5620629769aa5
+PKG_SOURCE_VERSION:=9d957848b9ac1d381149ce43b59775c21b1e24e0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -31,7 +31,7 @@ define Package/obuspa
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=USP agent
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto
+  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto-ssl +libwebsockets-openssl
 endef
 
 define Package/obuspa/description
@@ -44,7 +44,14 @@ endef
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall \
+	-Werror
+
+ifneq ($(CONFIG_OBUSPA_DB_PATH),)
+  CONFIGURE_ARGS += \
+	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
+endif
 
 ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_STOMP),y)
   CONFIGURE_ARGS += \
@@ -70,6 +77,14 @@ else
 	--disable-coap
 endif
 
+ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_WEBSOCKETS),y)
+  CONFIGURE_ARGS += \
+	--enable-websockets
+else
+  CONFIGURE_ARGS += \
+	--disable-websockets
+endif
+
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/

obuspa/files/etc/init.d/obuspa

@@ -31,7 +31,7 @@ cleanup() {
 trap cleanup EXIT
 
 log() {
-	echo "${@}"|logger -t obuspa.init -p debug
+	echo "$*"|logger -t obuspa.init -p debug
 }
 
 db_set() {
@@ -49,9 +49,8 @@ update_keep() {
 		return;
 	fi
 
-	grep -q "${keep_file}" ${KEEP_FILES}
-	if [ "$?" -ne 0 ]; then
-		echo ${keep_file} >> ${KEEP_FILES}
+	if grep -q "${keep_file}" ${KEEP_FILES}; then
+		echo "${keep_file}" >> ${KEEP_FILES}
 	fi
 }
 
@@ -63,11 +62,12 @@ get_index() {
 }
 
 get_role_index_from_json() {
-	local role="${@}"
+	local role="$*"
 	local num=0
+	local roles_obj
 
 	# In case of role is empty or file not present
-	if [ -z "${role}" -o ! -f "${role_def_file}" ]; then
+	if [ -z "${role}" ] || [ ! -f "${role_def_file}" ]; then
 		return 0
 	fi
 
@@ -79,11 +79,11 @@ get_role_index_from_json() {
 
 	for k in ${roles_obj}; do
 		local rname
-		json_select $k
+		json_select "$k"
 		json_get_var rname name
 		json_select ..
 
-		if [ "${rname}" != "Untrusted" -a "${rname}" != "full_access" ]; then
+		if [ "${rname}" != "Untrusted" ] && [ "${rname}" != "full_access" ]; then
 			num=$(( num + 1 ))
 		fi
 
@@ -102,10 +102,10 @@ get_uci_ref_index() {
 
 	index=0
 	config_load $CONFIGURATION
-	config_foreach get_index $1 $2
+	config_foreach get_index "$1" "$2"
 	val=$(cat ${USP_TEMP_FILE})
 
-	if [ -z $val ]; then
+	if [ -z "${val}" ]; then
 		val=0
 	fi
 
@@ -121,7 +121,7 @@ validate_obuspa_section()
 		'trust_cert:file' \
 		'client_cert:file' \
 		'interface:string' \
-		'ifname:string:br-lan' \
+		'ifname:string' \
 		'debug:bool:false' \
 		'prototrace:bool:false' \
 		'log_level:uinteger' \
@@ -223,25 +223,37 @@ validate_mqtt_client_section()
 		'ConnectRetryMaxInterval:uinteger:60'
 }
 
-get_oui_from_db() {
-	local oui="$(db get device.deviceinfo.ManufacturerOUI)"
+validate_challenge_section()
+{
+	uci_validate_section ${CONFIGURATION} challenge "${1}" \
+		'Enable:bool:true' \
+		'Alias:string' \
+		'Description:string' \
+		'role_name:string' \
+		'Role:string' \
+		'Value:string' \
+		'Retries:uinteger:3' \
+		'LockoutPeriod:uinteger:0'
+}
 
-	echo "${oui}"
+get_oui_from_db() {
+	db -q get device.deviceinfo.ManufacturerOUI
 }
 
 get_serial_from_db() {
-	local serial="$(db get device.deviceinfo.SerialNumber)"
-
-	# this can encoded further
-	echo "${serial}"
+	db -q get device.deviceinfo.SerialNumber
 }
 
 publish_endpoint() {
 	local AgentEndpointID serial oui user pass
-	local opt=""
+
+	if ! uci -q get obuspa.localmqtt; then
+		log "Remote mqtt broker configured, skip publishing endpoint"
+		return 0;
+	fi
 
 	# return if mosquitto_pub is not present
-	if [ ! "$(which mosquitto_pub)" ]; then
+	if [ ! "$(command -v mosquitto_pub)" ]; then
 		log "mosquitto_pub not present can't publish EndpointID"
 		return 0;
 	fi
@@ -256,22 +268,24 @@ publish_endpoint() {
 	fi
 
 	config_get user localmqtt Username
-	if [ -n "${user}" ]; then
-		opt="-u ${user}"
-	fi
 	config_get pass localmqtt Password
-	if [ -n "${pass}" ]; then
-		opt="${opt} -P ${pass}"
-	fi
 
 	# publish Agent's EndpointID in mosquito broker for discovery by usp-js
 	# This is a work around till obuspa adds supports for mDNS discovery
-	log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
-	mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" ${opt}
+	if [ -n "${user}" ] && [ -n "${pass}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username, password"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}" -P "${pass}"
+	elif [ -n "${user}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username only"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}"
+	else
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}"
+	fi
 }
 
 configure_localagent() {
-	local Enable ParameterName EndpointID
+	local Enable EndpointID
 
 	validate_localagent_section 'localagent' || {
 		log "Validation of localagent section failed"
@@ -288,33 +302,33 @@ configure_localagent() {
 configure_controller() {
 	local EndpointID Enable AssignedRole PeriodicNotifInterval PeriodicNotifTime USPNotifRetryMinimumWaitInterval
 	local USPNotifRetryIntervalMultiplier ControllerCode Protocol Destination coap_host coap_path coap_port
-	local Reference Topic mqtt stomp assigned_role_name
+	local Reference Topic mqtt stomp assigned_role_name ParameterName
 
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
 		return 1;
 	}
 
-	if [ -z "${EndpointID}" -o -z "${Protocol}" ]; then
+	if [ -z "${EndpointID}" ] || [ -z "${Protocol}" ]; then
 		log "controller:: EndpointID id and Protocol cannot be empty"
 		return 1;
 	fi
 
-	if [ -z "${stomp}" -a -z "${Reference}"  -a -z "${mqtt}" -a -z "${coap_path}" ]; then
+	if [ -z "${stomp}" ] && [ -z "${Reference}" ] && [ -z "${mqtt}" ] && [ -z "${coap_path}" ]; then
 		log "controller:: Invalid configuration"
 		return 1;
 	fi
 
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp ${stomp})
+			val=$(get_uci_ref_index stomp "${stomp}")
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred stomp section"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt ${mqtt})
+			val=$(get_uci_ref_index mqtt "${mqtt}")
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred mqtt section"
 				return 1;
@@ -332,7 +346,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 	else
 		if [ -n "${assigned_role_name}" ]; then
-			AssignedRole=$(get_role_index ${assigned_role_name})
+			AssignedRole=$(get_role_index "${assigned_role_name}")
 			db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 		fi
 	fi
@@ -373,7 +387,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Alias "cpe-${_pnum}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Enable "${Enable}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.ParameterName "${param}"
-		_pnum=$(( ${_pnum} + 1 ))
+		_pnum=$(( _pnum + 1 ))
 	done
 
 	db_set
@@ -388,12 +402,13 @@ configure_subscription(){
 		return 1;
 	}
 
-	if [ -z "${Recipient}" -a -z "${controller}" ]; then
+	if [ -z "${Recipient}" ] && [ -z "${controller}" ]; then
 		log "No recipient for subscription"
+		return 1;
 	fi
 
 	if [ -z "${Recipient}" ]; then
-		val=$(get_uci_ref_index controller ${controller})
+		val=$(get_uci_ref_index controller "${controller}")
 		if [ "${val}" -eq 0 ]; then
 			log "Not able to find the referred controller section"
 				return 1;
@@ -412,26 +427,12 @@ configure_subscription(){
 	db_set Device.LocalAgent.Subscription.${subs_num}.Recipient "${Recipient}"
 }
 
-validate_challenge_section()
-{
-	uci_validate_section ${CONFIGURATION} challenge "${1}" \
-		'Enable:bool:true' \
-		'Alias:string' \
-		'Description:string' \
-		'role_name:string' \
-		'Role:string' \
-		'Value:string' \
-		'Retries:uinteger:3' \
-		'LockoutPeriod:uinteger:0'
-}
-
 check_json_load()
 {
 	local ret=0
 	if [ -f "${role_def_file}" ]; then
 		json_init
-		json_load_file "${role_def_file}" 2>&1 |grep -q Failed
-		if [ $? -eq 0 ]; then # In case of invalid json file
+		if json_load_file "${role_def_file}" 2>&1 |grep -q Failed; then
 			log "failed to load [${role_def_file}]"
 			ret=1
 		fi
@@ -443,7 +444,7 @@ check_json_load()
 get_role_index() {
 	local role="Device.LocalAgent.ControllerTrust.Role"
 	local idx=0
-	local role_name="${@}"
+	local role_name="$*"
 
 	case "${role_name}" in
 	'full_access')
@@ -455,10 +456,9 @@ get_role_index() {
 	 *)
 		local ji=0
 
-		check_json_load
-		if [ $? -eq 0 ]; then
-			get_role_index_from_json ${role_name}
-			ji=$?
+		ji=$(check_json_load)
+		if [ "${ji}" -eq 0 ]; then
+			get_role_index_from_json "${role_name}"
 		fi
 		idx=$(( ji + 2 )) # Add predefined roles
 	 esac
@@ -474,7 +474,7 @@ configure_challenges() {
 		exit 1;
 	}
 
-	if [ -z "${role_name}" -a -z "${Role}" ]; then
+	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
 		log "Either role_name or Role must defined for a challenge";
 		return 1;
 	fi
@@ -487,10 +487,10 @@ configure_challenges() {
 	fi
 
 	if [ -z "${Role}" ]; then
-		Role=$(get_role_index ${role_name})
+		Role=$(get_role_index "${role_name}")
 	fi
 
-	if [ -z "${Alias}" -a -n "${role_name}" ]; then
+	if [ -z "${Alias}" ] && [ -n "${role_name}" ]; then
 		Alias=${role_name}
 	fi
 
@@ -512,14 +512,14 @@ configure_mtp() {
 
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp ${stomp})
+			val=$(get_uci_ref_index stomp "${stomp}")
 			if [ "${val}" -eq 0 ]; then
 				log "Referred stomp section not found"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt ${mqtt})
+			val=$(get_uci_ref_index mqtt "${mqtt}")
 			if [ "${val}" -eq 0 ]; then
 				log "Referred mqtt section not found"
 				return 1;
@@ -583,7 +583,7 @@ configure_stomp_connection() {
 
 configure_mqtt_client(){
 	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion KeepAliveTime
-	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier
+	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier ClientID
 
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
@@ -617,11 +617,9 @@ configure_mqtt_client(){
 
 configure_obuspa() {
 	local enabled trust_cert ifname interface debug prototrace log_level db_file log_dest role_file
+	local client_cert
 
-	validate_obuspa_section "global" || {
-		log "Validation of global section failed"
-		return 1;
-	}
+	validate_obuspa_section "global"
 
 	role_def_file="${role_file}"
 
@@ -632,72 +630,98 @@ configure_obuspa() {
 		procd_set_param stderr 1
 	fi
 
-	if [ "${debug}" -eq 1 -a "${prototrace}" -eq 1 ]; then
+	if [ "${debug}" -eq 1 ] && [ "${prototrace}" -eq 1 ]; then
 		procd_append_param command -p
 	fi
 
-	if [ "${debug}" -eq 1 -a -n "${log_level}" ]; then
-		procd_append_param command -v ${log_level}
+	if [ "${debug}" -eq 1 ] && [ -n "${log_level}" ]; then
+		procd_append_param command -v "${log_level}"
 	fi
 
 	if [ -n "${log_dest}" ]; then
-		procd_append_param command -l ${log_dest}
+		procd_append_param command -l "${log_dest}"
 	fi
 
 	if [ -n "${interface}" ]; then
-		network_get_physdev ifname ${interface}
+		network_get_physdev ifname "${interface}"
 	fi
 
-	# Set this variable for root user and obuspa -c tool
-	if [ -f "${PROFILE}" ]; then
-		grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}
-		if [ "$?" -ne 0 ]; then
-			grep -q "export USP_BOARD_IFNAME" ${PROFILE}
-			if [ "$?" -eq 0 ]; then
+	if [ -n "${ifname}" ]; then
+		procd_set_param env USP_BOARD_IFNAME="${ifname}"
+		# Set this variable for root user and obuspa -c tool
+		if [ -f "${PROFILE}" ]; then
+			if grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}; then
+				if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
+					sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
+				fi
+			fi
+		fi
+		echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
+	else
+		if [ -f "$PROFILE" ]; then
+			if grep -q "export USP_BOARD_IFNAME" ${PROFILE}; then
 				sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
 			fi
-			echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
 		fi
-	else
-		echo "export USP_BOARD_IFNAME=${ifname}" > ${PROFILE}
 	fi
 
 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f ${db_file}
+		procd_append_param command -f "${db_file}"
 	fi
 
 	if [ -n "${trust_cert}" ]; then
 		update_keep "${trust_cert}"
 		if [ -f "${trust_cert}" ]; then
-			procd_append_param command -t ${trust_cert}
+			procd_append_param command -t "${trust_cert}"
 		fi
 	fi
 
 	if [ -n "${client_cert}" ]; then
 		update_keep "${client_cert}"
 		if [ -f "${client_cert}" ]; then
-			procd_append_param command -a ${client_cert}
+			procd_append_param command -a "${client_cert}"
 		fi
 	fi
-
-	procd_set_param env USP_BOARD_IFNAME=${ifname}
 }
 
 # Create factory reset file
 db_init() {
 	# Load configuration
 	config_load $CONFIGURATION
-	config_foreach configure_obuspa obuspa
+
 	config_foreach configure_controller controller
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_localagent localagent
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mtp mtp
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_stomp_connection stomp
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mqtt_client mqtt
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_subscription subscription
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_challenges challenge
+	[ "$?" -ne 0 ] && return 1;
 
 	db_set Internal.Reboot.Cause "LocalFactoryReset"
+	return 0;
+}
+
+register_service()
+{
+	procd_open_instance ${CONFIGURATION}
+	procd_set_param command ${PROG}
+	procd_append_param command -r ${PARAM_FILE}
+
+	configure_obuspa
+	procd_set_param respawn \
+			"${respawn_threshold:-5}" \
+			"${respawn_timeout:-10}" "${respawn_retry:-3}"
+
+	procd_set_param watch usp.raw
+	procd_close_instance
 }
 
 service_running() {
@@ -707,24 +731,19 @@ service_running() {
 start_service() {
 	local enabled
 
+	mkdir -p /tmp/obuspa/
 	config_load obuspa
-	config_get enabled global enabled
+	config_get_bool enabled global enabled 0
 
 	if [ "${enabled}" -eq 0 ]; then
 		log "OBUSPA not enabled"
 		return 0;
 	fi
 
-	procd_open_instance ${CONFIGURATION}
-	procd_set_param command ${PROG}
 	db_init
-	procd_append_param command -r ${PARAM_FILE}
-	procd_set_param respawn \
-			${respawn_threshold:-5} \
-			${respawn_timeout:-10} ${respawn_retry:-3}
+	[ "$?" -ne 0 ] && return 1;
 
-	procd_set_param watch usp.raw
-	procd_close_instance
+	register_service
 }
 
 stop_service() {
@@ -733,10 +752,10 @@ stop_service() {
 	config_load obuspa
 	config_get db_file global db_file
 
-	${PROG} -c stop 2>&1 >/dev/null
+	${PROG} -c stop >/dev/null 2>&1
 
 	if [ -z "${db_file}" ]; then
-		db_file="/tmp/usp.db"
+		db_file="/tmp/obuspa/usp.db"
 	fi
 
 	[ -f "${db_file}" ] && rm -f ${db_file}
@@ -771,4 +790,14 @@ service_triggers() {
 			json_add_int "" "2000"
 		json_close_array
 	procd_close_trigger
+
+	procd_open_validate
+	validate_obuspa_section
+	validate_localagent_section
+	validate_controller_section
+	validate_subscription_section
+	validate_mtp_section
+	validate_stomp_connection_section
+	validate_mqtt_client_section
+	procd_close_validate
 }

owsd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.3
+PKG_VERSION:=1.1.4
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f78f7198944758cd2140887ecd8970432f678fc1
+PKG_SOURCE_VERSION:=e37c6f9d708c454c802eede814cc51fb89c919e9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

paho-mqtt-c/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=edl-v10
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

qosmngr/files/etc/uci-defaults/60-qos_queue_generate

@@ -3,7 +3,7 @@
 . /lib/functions.sh
 
 ethwan="$(db -q get hw.board.ethernetWanPort)"
-cpu_model="$(brcm_fw_tool -k info)"
+cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
 
 generate_queue(){
 	section="$1"
@@ -19,7 +19,7 @@ generate_queue(){
 
         if [ $is_lan -eq 1 ]; then
 		case $cpu_model in
-			68*) no_of_q="0 1 2 3" ;;
+			BCM68*) no_of_q="0 1 2 3" ;;
 		esac
 
                 if grep -qE '[0-9]+ archer$' /proc/devices; then 

qosmngr/files/lib/qos/broadcom.sh

@@ -924,10 +924,10 @@ configure_qos() {
 
 reload_qos() {
 	local service_name="$1"
-	local cpu_model="$(brcm_fw_tool -k info)"
+	local cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
 
 	case $cpu_model in
-		68*|6755) POLICER_SKIP=1 ;;
+		BCM68*|BCM6755) POLICER_SKIP=1 ;;
 	esac
 
 	if [ -z "$service_name" ]; then

swmodd/Makefile

@@ -6,14 +6,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.0.21
+PKG_VERSION:=2.1.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=78b54d0ed0223a9787133597d3beaa5e97d97520
+PKG_SOURCE_VERSION:=f169ab825295e1e0bb414c7bbc921fab2ef9ccfa
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -61,10 +61,12 @@ endif
 
 define Package/swmodd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_DIR) $(1)/etc/swmod
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/swmodd.init $(1)/etc/init.d/swmodd
+	$(INSTALL_BIN) ./files/etc/init.d/swmodd $(1)/etc/init.d/swmodd
+	$(INSTALL_BIN) ./files/etc/config/swmodd $(1)/etc/config/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/swmodd $(1)/usr/sbin/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libswmodd.so $(1)/usr/lib/bbfdm/libswmodd.so
 ifeq ($(CONFIG_PACKAGE_liblxc),y)

swmodd/files/etc/config/swmodd

@@ -0,0 +1,4 @@
+config globals 'globals'
+	option enabled '1'
+	option debug '1'
+	option log_level '3'

swmodd/files/etc/init.d/swmodd

@@ -0,0 +1,57 @@
+#!/bin/sh /etc/rc.common
+
+START=94
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/swmodd
+
+validate_globals_section()
+{
+	uci_validate_section swmodd swmodd "globals" \
+		'enabled:bool:1' \
+		'debug:bool:false' \
+		'log_level:uinteger:1' \
+		'sock:string'
+}
+
+start_service() {
+	local enabled debug log_level sock
+
+	# creating fallback shared mount-point
+	mkdir -p /tmp/swmodd_dw
+
+	config_load swmodd
+
+	validate_globals_section || {
+		log "Validation of uci globals failed"
+		return 1;
+	}
+
+	[ "${enabled}" -eq 0 ] && return 0
+
+	procd_open_instance swmodd
+	procd_set_param command ${PROG}
+
+	if [ "${debug}" -eq 1 ]; then
+		procd_set_param stdout 1
+		procd_set_param stderr 1
+		procd_append_param command -l ${log_level}
+	fi
+
+	if [ -f "${sock}" ]; then
+		procd_append_param command -s ${sock}
+	fi
+
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service() {
+	service_stop ${PROG}
+}
+
+reload_service() {
+	stop
+	start
+}

swmodd/files/swmodd.init

@@ -1,23 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=94
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/swmodd
-
-start_service() {
-	procd_open_instance swmodd
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service() {
-	service_stop ${PROG}
-}
-
-reload_service() {
-	stop
-	start
-}

ubus-mqtt/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ubus-mqtt
-PKG_VERSION:=14.20.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/3rdparty/ubus-mqtt.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=NONE
-
-include $(INCLUDE_DIR)/package.mk
-
-CONFIGURE_VARS += \
-	BUILD_CC="$(HOSTCC)" \
-	TARGET_CC="$(TARGET_CC)"
-
-TARGET_CFLAGS += \
-	-L$(STAGING_DIR)/usr/lib -I$(STAGING_DIR)/usr/include
-
-define Package/ubus-mqtt
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=ubus-mqtt - a ubus replicator for mqtt
-  URL:=http://www.alleato.se/
-  MAINTAINER:=Martin Assarsson
-  DEPENDS:=+jansson +libpthread +libmosquitto +libopenssl +ubus +libubox
-endef
-
-define Package/ubus-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/src/ubus-mqtt $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) files/ubus-mqtt.init $(1)/etc/init.d/ubus-mqtt
-endef
-
-define Package/ubus-mqtt/postinst
-#!/bin/sh
-#/etc/init.d/ubus-mqtt enable
-#/etc/init.d/ubus-mqtt restart
-endef
-
-$(eval $(call BuildPackage,ubus-mqtt))
-
-

ubus-mqtt/files/ubus-mqtt.init

@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the ubus-mqtt
-#
-
-START=80
-PID_FILE=/var/state/ubus-mqtt.pid
-
-start() {
-        start-stop-daemon -S -b -m -p $PID_FILE -x /usr/sbin/ubus-mqtt
-}
- 
-stop() {
-        start-stop-daemon -K -p $PID_FILE
-}  
-             
-restart() {
-        stop
-        start
-}

umoci/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=umoci
+PKG_VERSION:=0.0.1
+PKG_RELEASE:=1
+PKG_LICENSE:=Apache-2.0
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_NAME:=umoci
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=https://github.com/opencontainers/umoci.git
+PKG_SOURCE_VERSION:=2cec49f54b72684ef170f11c708c56140f298bf7
+PKG_MIRROR_HASH:=skip
+
+PKG_BUILD_DEPENDS:=golang/host
+PKG_BUILD_PARALLEL:=1
+PKG_USE_MIPS16:=0
+
+GO_PKG:=github.com/opencontainers/umoci/
+GO_PKG_LDFLAGS_X:=main.gitCommit=$(PKG_SOURCE_VERSION) main.version=$(PKG_SOURCE_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+GOLANG_PACKAGE_MK:=$(wildcard $(TOPDIR)/feeds/*/lang/golang/golang-package.mk)
+
+# verify that there is only one single file returned
+ifneq (1,$(words $(GOLANG_PACKAGE_MK)))
+ifeq (0,$(words $(GOLANG_PACKAGE_MK)))
+$(error did not find golang-package.mk in any feed)
+else
+$(error found multiple golang-package.mk files in the feeds)
+endif
+else
+$(info found golang-package.mk at $(GOLANG_PACKAGE_MK))
+endif
+
+include $(GOLANG_PACKAGE_MK)
+
+define Package/umoci
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=umoci utility
+  URL:=https://github.com/opencontainers/umoci
+  DEPENDS:=$(GO_ARCH_DEPENDS)
+endef
+
+define Package/umoci/description
+  OCI (Open Container Initiative) image tool modifies Open Container images.
+endef
+
+GO_PKG_BUILD_VARS += GO111MODULE=auto
+
+define Build/Compile
+	$(call GoPackage/Build/Compile)
+	$(call GoPackage/Package/Install/Bin,$(PKG_INSTALL_DIR))
+endef
+
+define Package/umoci/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/umoci $(1)/usr/bin
+endef
+
+$(eval $(call GoBinPackage,umoci))
+$(eval $(call BuildPackage,umoci))

uspd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uspd
-PKG_VERSION:=2.1.43
+PKG_VERSION:=2.2.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c5c9a2675b29ae38d339f44099db30e5f22a278b
+PKG_SOURCE_VERSION:=a0c6b7e1b09987289e06da36124296ec9e792f77
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/uspd.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip

wfadatad/Config.in

@@ -1,4 +1,4 @@
-if PACKAGE_wfadatad || PACKAGE_wfadatad-collector
+if (PACKAGE_wfadatad)
 menu "configurations"
 
 config WFA_DELM_STANDALONE

wfadatad/Makefile

@@ -5,13 +5,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=wfadatad
-PKG_VERSION:=6.10.13
+PKG_VERSION:=6.10.6
 
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=1c4ff6177f7eef969293d6847454ffcdc41deaed
+PKG_SOURCE_VERSION:=f6f9f0b7aab4910b27036e9a375b018c22d6b726
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wfadatad.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=PROPRIETARY IOPSYS
@@ -52,21 +55,28 @@ ifeq ($(CONFIG_WFA_DELM_STANDALONE),y)
 MAKE_FLAGS += CONFIG_WFA_DELM_STANDALONE=y
 endif
 
+ifneq (,$(findstring ALPHA,$(CONFIG_VERSION_CODE)))
+MAKE_FLAGS += DEBUG=1
+endif
+
+ifneq (,$(findstring BETA,$(CONFIG_VERSION_CODE)))
+MAKE_FLAGS += DEBUG=1
+endif
+
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+  rsync -r --exclude=.* ~/git/wfadatad/ $(PKG_BUILD_DIR)/
+endef
+endif
+
 MAKE_PATH:=src
 
 
-EXECS := \
-	$(if $(CONFIG_PACKAGE_wfadatad),agent/deagent) \
-	$(if $(CONFIG_PACKAGE_wfadatad-collector),collector/decollector)
-
-MAKE_FLAGS += EXECS="$(EXECS)"
-
-
 define Package/wfadatad/install
 
 ifeq ($(CONFIG_WFA_DELM_STANDALONE),y)