easy-sock-libs: 6.5.4

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@iopsys.eu>

ated/Makefile

@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
-#
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,7 +1,3 @@
-if PACKAGE_libbbfdm
-
-menu "Configuration"
-
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -14,10 +10,6 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
-config BBF_TR181
-	bool "Enable TR-181 Data Model Support"
-	default y
-
 config BBF_TR104
 	bool "Enable TR-104 Data Model Support"
 	default y
@@ -28,10 +20,12 @@ config BBF_TR143
 
 config BBFDM_ENABLE_JSON_PLUGIN
 	bool "Enable json plugin to extend datamodel"
-	default n
+	default y
 
 config BBFDM_ENABLE_DOTSO_PLUGIN
 	bool "Enable shared library plugin to extend datamodel"
-	default n
-endmenu
-endif
+	default y
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255

bbf/Makefile

@@ -1,41 +1,69 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.4.27
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_VERSION:=6.8.6
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=710485a57e311a5b4c5434efe3e79fc58cb6c429
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=a517b0b29ec8c34b8492b88bc887582e7d55a524
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Library for libbbfdm API
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
-define Package/libbbfdm
+define Package/libbbfdm/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
 endef
 
 define Package/libbbfdm/config
@@ -57,72 +85,81 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror \
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_PACKAGE_libopenssl),y)
-CONFIGURE_ARGS += \
-	--enable-libopenssl
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CONFIGURE_ARGS += \
-	--enable-vendor-extension
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
 
-CONFIGURE_ARGS += \
-	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
-	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
 ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CONFIGURE_ARGS += \
-	--enable-json-plugin
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
 endif
 
 ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CONFIGURE_ARGS += \
-	--enable-shared-library
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
 endif
 
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
-define Package/libbbfdm/install
+define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/lib
 	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 endef
 
-define Package/libbbfdm/prerm
+define Package/libbbfdm/default/prerm
 	#!/bin/sh
 	rm -rf /etc/bbfdm/dmmap/*
 	exit 0
 endef
 
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
 define Build/InstallDev
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
@@ -131,9 +168,12 @@ define Build/InstallDev
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
 endef
 
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bulkdata/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2022 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,20 +8,25 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=1.0.3
+PKG_VERSION:=2.0.3
 
-PKG_SOURCE_VERSION:=b35e7862bc17fc11dc1f757c7b93900995a28633
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+endif
+
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -29,21 +34,24 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	BBF BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall -Werror
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
+endef
+endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/config/bulkdata

@@ -1,43 +1,6 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
 	option log_level '3'
 
-config profile
-	option profile_id '1'
-	option enable '0'
-	option name ''
-	option nbre_of_retained_failed_reports '0'
-	option protocol 'http'
-	option encoding_type ''
-	option reporting_interval '86400'
-	option time_reference '0'
-	option csv_encoding_field_separator ','
-	option csv_encoding_row_separator '
'
-	option csv_encoding_escape_character '"'
-	option csv_encoding_report_format 'column'
-	option csv_encoding_row_time_stamp 'unix'
-	option json_encoding_report_format 'objecthierarchy'
-	option json_encoding_report_time_stamp 'unix'
-	option http_url ''
-	option http_username ''
-	option http_password ''
-	option http_compression 'none'
-	option http_method 'post'
-	option http_use_date_header '1'
-	option http_retry_enable '0'
-	option http_retry_minimum_wait_interval '5'
-	option http_retry_interval_multiplier '2000'
-	option http_persist_across_reboot '0'
-
-config profile_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-
-config profile_http_request_uri_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,7 +1,4 @@
 #!/bin/sh /etc/rc.common
-# Bulkdata Software
-# Copyright (C) 2020 iopsys Software Solutions AB
-# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
 START=99
 STOP=10
@@ -10,13 +7,16 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
-	if [ "$bulkdata_enable" = "1" ]; then
-		procd_open_instance
-		procd_set_param command "$PROG"
-		procd_set_param respawn "3" "7" "0"
-		procd_close_instance
-	fi
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
+
+	[ "$enable" != "1" ] && {
+		return 0
+	}
+
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn "3" "7" "0"
+	procd_close_instance
 }
 
 boot() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata.${section}.profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

crashlog/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crashlog
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crashlog
-  CATEGORY:=Utilities
-  TITLE:=Handling kernel crash logs
-endef
-
-define Package/crashlog/description
-	Handling kernel crash logs.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/crashlog/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -1,11 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-
-start()
-{
-    if [ -e /proc/sys/kernel/core_pattern ]
-    then
-	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
-    fi
-}

crashlog/files/etc/init.d/crashlog

@@ -1,55 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-send_log()
-{
-	nr=$(db get hw.board.serial_number)
-	hw=$(db get hw.board.model_name)
-	fam=$(db get hw.board.iopVerFam)
-	sw=$(db get hw.board.iopVersion)
-	server=$(/sbin/uci get system.crashlog.server)
-
-	while true
-	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
-	    if [ $? == 0 ]
-	    then
-	       break;
-	    fi
-	    # wait for another minute then try again
-	    sleep 60
-	done
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=crashlog
-    /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
-    /sbin/uci commit
-}
-
-boot()
-{
-    # is crashlog enabled ?
-    enable=$(/sbin/uci get system.crashlog.enable)
-    case $enable in
-	0|no|NO|false|FALSE)
-	    exit 0
-	    ;;
-	"")
-	    fill_in_default
-	    exit 0
-	    ;;
-    esac
-
-    # is this boot a result from a crash ?
-    reason=$(cat /etc/boot_reason)
-    case $reason in
-	HW|WD)
-	    send_log&
-	    ;;
-    esac
-}

crashlog/files/sbin/logcore

@@ -1,60 +0,0 @@
-#! /bin/sh
-
-TMP_CORE=/tmp/new_core
-# first test if we can contact the log server.
-# if not abort directly the core file takes up memory
-alive()
-{
-	ping -c1 $server
-
-	if [ $? != 0 ]
-	then
-		# drain core file from kernel
-		cat >/dev/null
-		exit 0
-	fi
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=corelog
-    /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
-    /sbin/uci commit
-}
-
-# is corelog enabled ?
-enable=$(/sbin/uci get system.corelog.enable)
-case $enable in
-    0|no|NO|false|FALSE)
-	# drain core file from kernel
-	cat >/dev/null
-	exit 0
-	;;
-    "")
-	fill_in_default
-	exit 0
-	;;
-esac
-
-server=$(/sbin/uci get system.corelog.server)
-
-alive
-
-# dump out the core to disk we need this as scp needs a size before we send data
-# and this is the only way to know how much data there is
-cat >$TMP_CORE
-
-# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
-# more memory to work with. normally this would do nothing.
-cat >/dev/null
-
-nr=$(db get hw.board.serial_number)
-hw=$(db get hw.board.model_name)
-fam=$(hw.board.iopVerFam)
-sw=$(db get hw.board.iopVersion)
-
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
-rm $TMP_CORE
-

crashlog/files/usr/sbin/logssh

@@ -1,6 +0,0 @@
-#!/bin/sh
-# we need to have the -y option to dropbear to not halt the scp when
-# transfering the log file to a new server for the first time.
-# since we already need this also put in the keyfile
-
-ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -1,42 +0,0 @@
-Install scp server.
-
-Create a user account on a server and make sure it's possible to login to it
-using ssh.
-
-For now the user has to be called "log"
-
-USER is the user name of the account
-HOME is the user home directory.
-Both should be changed to the correct value in all following example commands.
-
-create HOME/bin
-Put scp_upload in HOME/bin
-make it executable "chmod a+x HOME/bin/scp_upload" 
-
-create home/.ssh   (observer the dot .shh)
-
-create an empty file HOME/.ssh/authorized_keys
-
--------------------------------
-Now everyhting is setup for use but we have not added any clients.
-What we need is the public key for the clients.
-
-For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
-
-----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
-----------
-
-The public key should be just one line. Add that line to the 
-HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
-the first text on the same line. that is insert before the key data.
-
-command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
-
-Do not forget to change HOME to the correct value for the server and there 
-should be one space separating the key data and the above text.
----------------------------------
-Now test to make sure that you can upload new files, not download files
-and not overwrite files from the client.
-
-

crashlog/scp_upload

@@ -1,53 +0,0 @@
-#! /bin/bash
-# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
-
-val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
-if [ $val != 3 ]
-then
-    echo "only scp is allowed for this rsa key"
-    exit 1
-fi
-
-#strip out "scp" as getopts barf on anything not an option
-
-args=${SSH_ORIGINAL_COMMAND:3}
-
-# we must set args to positional paramters otherwise it's next to impossible
-# to get to the rest of the line that is not arguments.
-
-set -- $args
-while getopts "rftdvpq" Option
-do
-  case $Option in
-    r ) echo "recursive not allowed";exit 1;;
-    f ) echo "reading files not allowed";exit 1;;
-    t ) ;;
-    d ) ;;
-    v ) ;;
-    p ) ;;
-    q ) ;;
-    * ) ;;   # Default.
-  esac
-done
-
-shift $(($OPTIND - 1))
-
-file="$*"
-dir=$(dirname "$file")
-
-if [ "$dir" != "log" ]
-then
-    echo "only allowed to write to log/"
-    exit 1
-fi
-
-# try to create uniq files
-EXTRA=$((0))
-while [ -e "${file}_${EXTRA}" ]
-do
-    EXTRA=$((EXTRA +1))
-done
-
-logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
-
-exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.1
+PKG_VERSION:=3.5.4
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ef9d4c6124d0ca66f048f3d678d9a25f13aa4207
+PKG_SOURCE_VERSION:=54ebb54162fae9fdd6e327e430cf57aa217c176d
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -34,7 +34,7 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
 endef
 
 define Package/$(PKG_NAME)/description
@@ -53,6 +53,7 @@ endif
 
 TARGET_CFLAGS += \
 	-Wall \
+        -Werror \
 	-I$(STAGING_DIR)/usr/include/libxml2
 
 ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)

dectmngr/files/etc/init.d/dectmngr

@@ -11,6 +11,8 @@ PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
+
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
 	pidof $NAME && killall -q $NAME
@@ -30,7 +32,7 @@ start_service() {
 
 	test $(db get hw.board.hasDect) = "0" && return
 
-	echo 1 > /sys/class/gpio/gpio14/value
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -71,7 +73,7 @@ start_service() {
 stop_service() {
 	test $(db get hw.board.hasDect) = "0" && return
 
-	echo 0 > /sys/class/gpio/gpio14/value
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
 	stop_and_wait_dectmngr
 }
 
@@ -86,8 +88,10 @@ service_triggers()
 }
 
 boot() {
-	echo 14 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio14/direction
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH

dslmngr/Makefile

@@ -28,12 +28,6 @@ include $(INCLUDE_DIR)/package.mk
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
 endef
 
 define Package/easy-qos/description
@@ -39,11 +39,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,301 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-CLIENT_LIST="/tmp/easy_qos_class_client.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-exec_class_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-get_mark() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo "0x41/0x3df";;
-		"low")
-			echo "0x82/0x3df";;
-		"besteffort")
-			echo "0xc3/0x3df";;
-		"normal")
-			echo "0x104/0x3df";;
-		"video")
-			echo "0x145/0x3df";;
-		"medium")
-			echo "0x186/0x3df";;
-		"high")
-			echo "0x1c7/0x3df";;
-		"highest")
-			echo "0x208/0x3df";;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_ip_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j EXTMARK --set-mark ${mark}";
-	if [ "${proto}" != "icmp" ]; then
-		if [ -n "${ports}" ]; then
-			cmd="--match multiport --dports ${ports} ${cmd}";
-		fi
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd}
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-
-	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	done
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-
-	if [ "${proto}" != "icmp" ]; then
-		if [ "${ports}" != "none" ]; then
-			IFS=","
-			for port in ${ports};
-			do
-				cmd="--dport ${port}:${port} ${cmd}";
-			done
-			IFS=' '
-		fi
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_class_log classcfg ${cmd}
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list ip ipmark
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-	ipmark=$(get_mark ${priority})
-	ip=$(get_ipaddress ${macaddr})
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
-				create_ip_rule udp ${ip} ${ipmark} ${port_list}
-			fi
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	map_client_entries
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.4.40
+PKG_VERSION:=6.5.4
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=699744d5ae9e043715c260f9b58bbc18747895f9
+PKG_SOURCE_VERSION:=ab15fa17c9b30ac972db62960d4c2b56c73e4b92
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -32,31 +32,42 @@ define Package/easy-soc-libs
   CATEGORY:=Libraries
   TITLE:=IOPSYS Easy SoC libraries
   SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
   MENU:=1
 endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
+  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
+  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
+export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
@@ -78,6 +89,7 @@ endif
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
 	-I$(STAGING_DIR)/usr/include/libnl3
 
 MAKE_FLAGS += \
@@ -85,6 +97,7 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_econet:ecnt_api
 endef
 
 define Package/libethernet/config

endptmngr/Makefile

@@ -13,12 +13,12 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=3a71d4124061287783e0d4c763b1b20e925d2133
+PKG_SOURCE_VERSION:=7d43e471f0ffc4a54eb2ac35eced4b72fca4dafb
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=MIT
+PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
 export BUILD_DIR
@@ -30,7 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504021
+export CONFIG_BRCM_SDK_VER_504040
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
@@ -56,6 +56,10 @@ define Build/Prepare
 endef
 endif
 
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
+
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin

evoice/Makefile

@@ -0,0 +1,103 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.8
+
+LOCAL_DEV=0
+LOCAL_DEV_EVOICE_DIR=~/voip/evoice
+
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=de96c32a5bd66b9a4dbf40a54a86d31b4c9116c1
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
+
+PKG_BUILD_DEPENDS:=bbf
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl\
+		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
+		+TARGET_iopsys_econet:kmod-voip_driver\
+		+TARGET_iopsys_econet:voip_app
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+define Build/Prepare
+	@echo "======================================================="
+	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
+	@echo "======================================================="
+	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+IDIR = $(STAGING_DIR)/usr/include
+TONES_INI_REQUIRED=
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+	TARGET_PLATFORM=BROADCOM
+	BDIR = bcm963xx/userspace/private/apps/voice
+	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
+		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
+		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+	TRG=SVrgBcmFxs
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
+	TARGET_PLATFORM=ECONET
+	TONES_INI_REQUIRED=y
+	TRG=SVrgMtekOwrt
+endif
+
+# disable temporarily some not important warnings, force PIC
+CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
+
+export TARGET_PLATFORM
+
+#used and altered by BIDE makefiles
+export _XFLAGS
+
+BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
+	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
+
+	@echo "clean libvoiceservice before building shared lib!"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,345 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config Capabilities 'Capabilities'
+	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+	
+config CapabilitiesCodec 'Codec5'
+	option Codec 'G.729'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'Codec1'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'Codec2'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'Codec3'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'Codec4'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'Codec5'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '3PrefixInfo1'
+	list PrefixList '3PrefixInfo2'
+	list PrefixList '3PrefixInfo3'
+	list PrefixList '3PrefixInfo4'
+	list PrefixList '3PrefixInfo5'
+	list PrefixList '3PrefixInfo6'
+	list PrefixList '3PrefixInfo7'
+	list PrefixList '3PrefixInfo8'
+	list PrefixList '3PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '4PrefixInfo1'
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '4PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,167 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option HW_VoiceDSP 'hw.board.VoiceDSP'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable 'voice.Network@.Enable'
+   option Registration_Server 'voice.Network@.RegistrarServer'
+   option Outbound_Proxy 'voice.Network@.ProxyServer'
+   option SIP_Port 'voice.Network@.RegistrarServerPort'
+   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
+   option T1 'voice.Network@.TimerT1'
+   option UserAgentDomain 'voice.Network@.UserAgentDomain'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,57 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option SIP_SessTmrEnable '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+

evoice/files/etc/init.d/evoice

@@ -0,0 +1,26 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=evoice
+VOICE_UCI_CONFIG=voice
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger $VOICE_UCI_CONFIG
+}

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7e013f0afa68378d38a6bdc9b0c5a342bd3dd0a5
+PKG_SOURCE_VERSION:=0ebaf1e7d1f09318ae75d0f475a25280742b790e
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
@@ -38,9 +38,6 @@ define Package/$(PKG_NAME)/description
 	Command to extract sub images from FIT images.
 endef
 
-MAKE_FLAGS += \
-	CFLAGS+="-Wall"
-
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 

gryphon-led-module/Makefile

@@ -44,13 +44,17 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	MODULES_SUBDIR:=lib/modules/4.19.183
-	TARGET_CROSS:=$(CONFIG_BCM_TOOLCHAIN)/bin/$(CONFIG_BCM_TOOLTUPLE)
+	MODULES_SUBDIR:=lib/modules/4.19.225
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
-		TARGET_CROSS:=/opt/toolchains/crosstools-aarch64-gcc-9.2-linux-4.19-glibc-2.30-binutils-2.32/bin/aarch64-buildroot-linux-gnu-
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
+		# These targets use a 32-bit arm-sfp kernel
+		LINUX_KARCH:=arm
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

icwmp/Config_cwmp.in

@@ -1,24 +1,14 @@
-if PACKAGE_icwmp
-
-menu "Configuration"
 choice
-	prompt "Select ACS sever"
-	default CWMP_ACS_MULTI
+       prompt "Select ACS sever"
+       default CWMP_ACS_MULTI
+       depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
 
 config CWMP_ACS_MULTI
 	bool "No specific ACS, follow standard"
 
 config CWMP_ACS_HDM
-	bool "HDM"
+	bool "Select HDM as ACS server"
 endchoice
-
-config CWMP_DEBUG
-	bool "Compile with debug options"
-	default y
-
-config CWMP_DEVEL_DEBUG
-	bool "Compile with development debug options"
-	default n
-endmenu
-endif
-

icwmp/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,56 +8,86 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=8.2.27
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_VERSION:=8.4.22
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=da88c8c28656b2db54ab205d26faccda68546c05
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_VERSION:=4d59758b7ba2a6d7710a86df3b52c765f2c68de5
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
 PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
+PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_CWMP_ACS_MULTI \
 	CONFIG_CWMP_ACS_HDM \
 	CONFIG_CWMP_DEBUG \
 	CONFIG_CWMP_DEVEL_DEBUG
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
 include $(INCLUDE_DIR)/package.mk
 
-define Package/$(PKG_NAME)
+define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
+  TITLE:=TR069 CWMP client
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
 endef
 
-define Package/$(PKG_NAME)/description
- A free client implementation of CWMP (TR-069) protocol
-endef
-
-define Package/$(PKG_NAME)/config
+define Package/icwmp/config
 	source "$(SOURCE)/Config_cwmp.in"
 endef
 
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE \
 	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
 
+define Package/icwmp
+  $(Package/icwmp/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/icwmp-openssl
+  $(Package/icwmp/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  VARIANT:=openssl
+endef
+
+define Package/icwmp-wolfssl
+  $(Package/icwmp/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
+  CONFLICTS := icwmp-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/icwmp-mbedtls
+  $(Package/icwmp/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
+  CONFLICTS := icwmp-openssl icwmp-wolfssl
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+ifeq ($(BUILD_VARIANT),openssl)
+CONFIGURE_ARGS += --enable-libopenssl
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CONFIGURE_ARGS += --enable-libwolfssl
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CONFIGURE_ARGS += --enable-libmbedtls
+endif
+
 ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
 CONFIGURE_ARGS += \
 	--enable-acs=multi
@@ -68,32 +98,37 @@ CONFIGURE_ARGS += \
 	--enable-acs=hdm
 endif
 
-ifeq ($(CONFIG_CWMP_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-debug
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
 endif
 
-ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-devel
-endif
-
-define Package/$(PKG_NAME)/install
+define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/95-icwmp-generate-ssl $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
 	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
 endef
 
-$(eval $(call BuildPackage,$(PKG_NAME)))
+Package/icwmp-openssl/install = $(Package/icwmp/default/install)
+Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
+Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
+
+$(eval $(call BuildPackage,icwmp))
+$(eval $(call BuildPackage,icwmp-openssl))
+$(eval $(call BuildPackage,icwmp-wolfssl))
+$(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -0,0 +1,36 @@
+{
+	"json_plugin_version": 1,
+	"Device.CWMPManagementServer.": {
+		"type": "object",
+		"version": "2.15",
+		"protocols": [
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"dependency": "file:/etc/config/cwmp",
+		"EnableCWMP": {
+			"type": "boolean",
+			"version": "2.15",
+			"read": true,
+			"write": true,
+			"protocols": [
+				"usp"
+			],
+			"mapping": [
+				{
+					"type": "uci",
+					"uci": {
+						"file": "cwmp",
+						"section": {
+							"name": "cpe"
+						},
+						"option": {
+							"name": "enable"
+						}
+					}
+				}
+			]
+		}
+	}
+}

icwmp/files/etc/config/cwmp

@@ -11,15 +11,14 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
-	option https_ssl_capath ''
 	option ipv6_enable '0'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option interface 'eth0.1'
+	option enable '1'
 	option default_wan_interface 'wan'
 	option log_to_console 'disable'
-	option log_to_file 'enable'
+	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'

icwmp/files/etc/firewall.cwmp

@@ -6,7 +6,6 @@ log() {
 }
 
 if [ ! -f "/var/state/cwmp" ]; then
-	touch "/var/state/cwmp"
 	exit 0;
 fi
 

icwmp/files/etc/icwmpd/update.sh

@@ -1,17 +1,29 @@
 #!/bin/sh
 
 log() {
-	echo $@ |logger -t cwmp.update -p info
+	echo "$@" |logger -t cwmp.update -p info
 }
 
 handle_icwmp_update() {
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local vendorspecinf=`ifstatus ${defwan} | jsonfilter -e "@.data.vendorspecinf"`
+	local defwan vendorspecinf update
+	local bootup_start
 
-	log "Handling dhcp option value ${vendorspecinf}"
+	bootup_start="${1:-0}"
+	update="0"
+	defwan="$(uci -q get cwmp.cpe.default_wan_interface)"
+	vendorspecinf="$(ifstatus "${defwan}" | jsonfilter -e "@.data.vendorspecinf")"
+
+	log "Handling dhcp option value [${vendorspecinf}]"
 	[ -n "$vendorspecinf" ] && {
-		local url=""
-		local old_url="$(uci -q get cwmp.acs.dhcp_url)"
+		local url old_url
+		local prov_code old_prov_code
+		local min_wait_interval old_min_wait_interval
+		local retry_interval_multiplier old_retry_interval_multiplier
+
+		old_url="$(uci -q get cwmp.acs.dhcp_url)"
+		old_prov_code="$(uci -q get cwmp.cpe.dhcp_provisioning_code)"
+		old_min_wait_interval="$(uci -q get cwmp.acs.dhcp_retry_min_wait_interval)"
+		old_retry_interval_multiplier="$(uci -q get cwmp.acs.dhcp_retry_interval_multiplier)"
 
 		case $vendorspecinf in
 			http://*|https://*)
@@ -21,7 +33,16 @@ handle_icwmp_update() {
 				for optval in $vendorspecinf; do
 				        case $optval in
 				                1=*)
-				                        url="$(echo $optval | cut -d"=" -f2-)"
+				                        url="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                2=*)
+				                        prov_code="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                3=*)
+				                        min_wait_interval="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                4=*)
+				                        retry_interval_multiplier="$(echo "$optval" | cut -d"=" -f2-)"
 				                ;;
 				        esac
 				done
@@ -29,15 +50,57 @@ handle_icwmp_update() {
 		esac
 
 		if [ -n "$url" ]; then
-			log "## icwmp url[${old_url}] changed to [${url}]"
 			if [ "${url}" != "${old_url}" ]; then
-				log "Restarting icwmp url[${old_url}] changed to [${url}]"
+				log "## icwmp url[${old_url}] changed to [${url}]"
 				uci -q set cwmp.acs.dhcp_url="$url"
-				uci commit cwmp
-				ubus call uci commit '{"config":"cwmp"}'
+				update=1
+			fi
+		fi
+		if [ -n "$prov_code" ]; then
+			if [ "${prov_code}" != "${old_prov_code}" ]; then
+				log "## icwmp prov_code[${old_prov_code}] changed to [${prov_code}]"
+				uci -q set cwmp.cpe.dhcp_provisioning_code="$prov_code"
+				update=1
+			fi
+		fi
+		if [ -n "$min_wait_interval" ]; then
+			if [ "${min_wait_interval}" != "${old_min_wait_interval}" ]; then
+				log "## icwmp min_wait_interval[${old_min_wait_interval}] changed to [${min_wait_interval}]"
+				uci -q set cwmp.acs.dhcp_retry_min_wait_interval="$min_wait_interval"
+				update=1
+			fi
+		fi
+		if [ -n "$retry_interval_multiplier" ]; then
+			if [ "${retry_interval_multiplier}" != "${old_retry_interval_multiplier}" ]; then
+				log "## icwmp retry_interval_multiplier[${old_retry_interval_multiplier}] changed to [${retry_interval_multiplier}]"
+				uci -q set cwmp.acs.dhcp_retry_interval_multiplier="$retry_interval_multiplier"
+				update=1
 			fi
 		fi
 	}
+
+	if [ "${bootup_start}" -eq "1" ]; then
+		# if called at boot up then no need to reload the service, since it will start after
+		uci commit cwmp
+		return 0
+	fi
+
+	# In case of update restart icwmp
+	if [ "${update}" -eq "1" ]; then
+		log "CWMP uci changes, reload cwmp with uci commit"
+		ubus call uci commit '{"config":"cwmp"}'
+	else
+		status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
+		if [ "$status" = "failure" ] || [ "$status" = "" ]; then
+			log "Trigger out of bound inform, since last inform status was failure"
+			ubus -t 10 call tr069 inform >/dev/null 2>&1
+			# Handle timeout or tr069 object not found
+			if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
+				log "Restarting icwmp tr069 object"
+				/etc/init.d/icwmpd restart
+			fi
+		fi
+	fi
 }
 
-handle_icwmp_update
+handle_icwmp_update $@

icwmp/files/etc/init.d/icwmpd

@@ -1,20 +1,48 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
-. /lib/functions.sh
-include /lib/network
-. /usr/share/libubox/jshn.sh
-
 START=99
-STOP=2
+STOP=00
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+include /lib/network
+
 log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
+regenerate_ssl_link()
+{
+	local cert_dir all_file rehash
+
+	cert_dir="${1}"
+	[ ! -d "${cert_dir}" ] && return 0;
+
+	### Generate all ssl link for pem certicates ###
+	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
+	fi
+
+	### Generate all ssl link for crt certicates ###
+	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
+	fi
+}
+
 enable_dhcp_option43() {
 	local wan="${1}"
 
@@ -36,7 +64,7 @@ enable_dhcp_option43() {
 	fi
 
 	newreqopts="$reqopts 43"
-	if [ $proto == "dhcp" ]; then
+	if [ "${proto}" == "dhcp" ]; then
 		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
@@ -50,65 +78,47 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f $resolvfile ]; do
+	while [ ! -f "$resolvfile" ]; do
 		sleep 1
-		[ $tm -ge $time ] && break
+		[ "$tm" -ge "$time" ] && break
 		tm=$((tm+1))
 	done
 }
 
-set_wan_interface() {
-	local wan_interface="${1}"
-	local l3_device=""
-
-	if [ -z "${wan_interface}" ]; then
-		return 0;
-	fi
-
-	json_load "$(ifstatus ${wan_interface})"
-	json_get_var l3_device l3_device
-	if [ -n "$l3_device" ]; then
-		uci -q set cwmp.cpe.interface="${l3_device}"
-		uci -q commit cwmp
-	fi
-}
-
 copy_cwmp_etc_files_to_varstate() {
-	if [ ! -f /var/state/cwmp ]
-	then
-		if [ -f /etc/icwmpd/cwmp ]
-		then
-			uci -q -c /etc/icwmpd delete cwmp.acs
-			uci -q -c /etc/icwmpd commit cwmp
-			cp /etc/icwmpd/cwmp /var/state/cwmp
-		else
-			touch /var/state/cwmp
-		fi
+	mkdir -p /var/run/icwmpd
+
+	if [ -f /etc/icwmpd/cwmp ]; then
+		uci -q -c /etc/icwmpd delete cwmp.acs
+		uci -q -c /etc/icwmpd commit cwmp
+		cp -f /etc/icwmpd/cwmp /var/state/cwmp
 	fi
 
-	mkdir -p /var/run/icwmpd
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]
-	then
-		mv /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd 2>/dev/null
+	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
 	fi
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]
-	then
-		mv /etc/icwmpd/dm_enabled_notify /var/run/icwmpd 2>/dev/null
+
+	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
 	fi
 }
 
 copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/state/cwmp ]
-	then
-		cp /var/state/cwmp /etc/icwmpd 2>/dev/null
+	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
 	fi
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]
-	then
-		cp /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd 2>/dev/null
+
+	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
 	fi
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]
-	then
-		cp /var/run/icwmpd/dm_enabled_notify /etc/icwmpd 2>/dev/null
+
+	if [ -f /var/state/cwmp ]; then
+		cp -f /var/state/cwmp /etc/icwmpd/
+	fi
+
+	# move the successful custom notify import marker to persistent storage
+	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
+		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
 	fi
 }
 
@@ -120,12 +130,13 @@ validate_acs_section()
 		'periodic_inform_interval:uinteger' \
 		'periodic_inform_time:string' \
 		'url:string' \
+		'dhcp_discovery:string' \
 		'dhcp_url:string' \
 		'compression:or("GZIP","Deflate","Disabled")' \
 		'retry_min_wait_interval:range(1, 65535)' \
 		'retry_interval_multiplier:range(1000, 65535)' \
-		'https_ssl_capath:file' \
-		'ipv6_enable:bool'
+		'ipv6_enable:bool' \
+		'ssl_capath:string'
 
 }
 
@@ -154,6 +165,7 @@ validate_cpe_section()
 }
 
 validate_defaults() {
+	local ssl_capath
 	config_load cwmp
 
 	validate_acs_section || {
@@ -161,96 +173,92 @@ validate_defaults() {
 		return 1;
 	}
 
-	[ -z "${url}" -a -z "${dhcp_url}" ] && {
-		log "ACS url is empty can't start"
-		return 1;
-	}
+	# Put the cert pem file in keep list
+	if [ -d "${ssl_capath}" ]; then
+		if ! grep "${ssl_capath}" /lib/upgrade/keep.d/icwmp; then
+			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
+		fi
+	fi
 
 	validate_cpe_section || {
 		log "Validation of cpe section failed"
 		return 1;
 	}
 
-	[ -z "${default_wan_interface}" ] && {
-		log "Wan interface is empty"
-		return 1;
-	}
-
 	return 0;
 }
 
 boot() {
-	local dhcp_url=""
-	local discovery="1"
+	local dhcp_discovery="0"
 
 	config_load cwmp
-	config_get_bool dhcp_discovery acs dhcp_discovery 1
-	config_get dhcp_url acs dhcp_url ""
+	config_get dhcp_discovery acs dhcp_discovery "0"
 
-	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
-		if [ -z "${dhcp_url}" ]; then
-			log "dhcp discovery enabled but no dhcp url, trigger update"
-			/etc/icwmpd/update.sh
-		fi
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		# Set dhcp option 43 if not already configured
+		config_get wan_interface cpe default_wan_interface "wan"
+		enable_dhcp_option43 "${wan_interface}"
+		/etc/icwmpd/update.sh 1
 	fi
+	
+	config_get ssl_capath acs ssl_capath
+
+	if [ -n "${ssl_capath}" ]; then
+		regenerate_ssl_link "${ssl_capath}"
+	fi
+
 	start
 }
 
 start_service() {
 	local enable_cwmp
 	local wan_interface
-	local dhcp_discovery
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
-	config_get dhcp_discovery acs dhcp_discovery
 	config_get wan_interface cpe default_wan_interface "wan"
 
-	if [ "$enable_cwmp" = "0" -o "$enable_cwmp" = "false" ]; then
+	if [ "$enable_cwmp" = "0" ] || [ "$enable_cwmp" = "false" ]; then
 		log "CWMP is not enabled"
 		return 0
 	fi
 
-	# Set wan interface if not configured
-	set_wan_interface "${wan_interface}"
-
-	# Set dhcp option 43 if dhcp discovery enabled
-	if [ "${dhcp_discovery}" == "enable" -o "${dhcp_discovery}" == "1" ]; then
-		enable_dhcp_option43 "${wan_interface}"
-	fi
-
 	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
 	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
 	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
 
-	# Copy backup data so that if it restart latter on it gets the info
-	copy_cwmp_etc_files_to_varstate
-
 	validate_defaults || {
 		log "Validation of defaults failed"
 		return 1;
 	}
 
+	# Copy backup data so that if it restart latter on it gets the info
+	copy_cwmp_etc_files_to_varstate
+
 	procd_open_instance icwmp
 	procd_set_param command "$PROG"
 	procd_append_param command -b
 	procd_set_param respawn \
-		${respawn_threshold:-5} \
-		${respawn_timeout:-10} ${respawn_retry:-3}
+		"${respawn_threshold:-5}" \
+		"${respawn_timeout:-10}" "${respawn_retry:-3}"
 
 	procd_set_param watch network.interface
 	procd_close_instance
 }
 
-stop_service()
+service_stopped()
 {
 	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	log "Restarting CWMP client"
-	stop
-	start
+	log "Reloading CWMP client"
+	ubus -t 1 call tr069 command '{"command":"reload"}'
+	if [ "$?" -ne "0" ]; then
+		log "Restarting CWMP client"
+		stop
+		start
+	fi
 }
 
 service_triggers() {

icwmp/files/etc/uci-defaults/95-icwmp-generate-ssl

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-regenerate_ssl_link(){
-	[ ! -d "/etc/ssl/certs" ] && return 0;
-	[ ! -f "/etc/ssl/certs/*.pem" ] && return 0;
-
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
-regenerate_ssl_link

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.6.19
+PKG_VERSION:=4.9.8
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7267a76fafa264792415a1cdc697a9e47934a1e6
+PKG_SOURCE_VERSION:=f546ee76b46d0b3288a8d6da5761f33bcddccfc0
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -38,7 +38,7 @@ define Package/libieee1905
 $(call Package/ieee1905/Default,$(1))
   TITLE+= (library for CMDU and TLV handling)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +libopenssl
+	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
@@ -70,9 +70,9 @@ define Package/libieee1905/description
 endef
 
 TARGET_CFLAGS += \
+	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/openssl \
 	-D_GNU_SOURCE
 
 ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
@@ -130,6 +130,7 @@ define Build/InstallDev/libieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef

ieee1905/files/etc/config/ieee1905

@@ -3,20 +3,24 @@ config ieee1905 'ieee1905'
 	option extension '1'
 	list extmodule 'map'
 	option registrar '2 5'
+#	option macaddress '0a:1b:2c:3d:4e:50'
 
+config al-iface
+	option enabled '1'
+	option ifname 'br-lan'
+	option type 'bridge'
+
+# ap sections are auto-generated/overwritten during onboarding
+#
 config ap
 	option band '2'
-	option ssid 'TestSSID.2'
-	option encryption 'psk2'
-	option key '5555500000'
+	option ssid 'IOWRT-2.4GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
 
 config ap
 	option band '5'
-	option ssid 'TestSSID.5'
-	option encryption 'psk2'
-	option key '2222200000'
+	option ssid 'IOWRT-5GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
 
-config al-iface
-	option enabled 1
-	option ifname 'br-lan'
-	option type 'bridge'

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.2
+PKG_VERSION:=1.2.3
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
+PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/Config.in

@@ -0,0 +1,7 @@
+config TARGET_VERSION
+	string
+	prompt "Software Version"
+
+config TARGET_CUSTOMER
+	string
+	prompt "Customer ID"

iop/Makefile

@@ -24,6 +24,10 @@ define Package/iop/description
 	This package contains iopsysWrt SDK utilities
 endef
 
+define Package/iop/config
+	source "$(SOURCE)/Config.in"
+endef
+
 define Build/Compile
 	true
 endef

iop/config

@@ -1,106 +1,210 @@
-CONFIG_BUSYBOX_CUSTOM=y
+############
+# Generic #
+##########
+
+# Build #
+CONFIG_BUILD_LOG=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+# CONFIG_SIGNED_PACKAGES is not set
+
+# Image #
+CONFIG_TARGET_CUSTOMER="IOPSYS"
+CONFIG_TARGET_ROOTFS_TARGZ=y
+
+# /etc/banner and /etc/device_info #
+CONFIG_IMAGEOPT=y
+CONFIG_VERSIONOPT=y
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
+CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
+
+# /lib/preinit #
+CONFIG_PREINITOPT=y
+# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
+CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
+CONFIG_TARGET_PREINIT_TIMEOUT=1
+# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
+# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
+CONFIG_TARGET_PREINIT_IFNAME=""
+CONFIG_TARGET_PREINIT_IP=""
+CONFIG_TARGET_PREINIT_NETMASK=""
+CONFIG_TARGET_PREINIT_BROADCAST=""
+
+# Mirror #
+CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
+
+
+##################
+# IOWRT Add-ons #
+################
+
+# EasySoC HAL #
+CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
+CONFIG_PACKAGE_wifimngr=y
+
+# Multi-AP #
+CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-agent=y
+CONFIG_PACKAGE_map-controller=y
+CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_wfadatad-collector=y
+
+# Network #
+CONFIG_PACKAGE_netmode=y
+CONFIG_PACKAGE_owsd=m
+CONFIG_PACKAGE_urlfilter=y
+
+# System #
+CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_questd=y
+CONFIG_PACKAGE_rulengd=y
+
+# TR-x69 #
+CONFIG_PACKAGE_uspd-mbedtls=y
+CONFIG_PACKAGE_icwmp-mbedtls=y
+CONFIG_PACKAGE_obuspa=y
+CONFIG_PACKAGE_bulkdata=y
+CONFIG_PACKAGE_periodicstats=y
+CONFIG_PACKAGE_stunc-mbedtls=m
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_twamp=m
+CONFIG_PACKAGE_udpecho-client=m
+CONFIG_PACKAGE_udpecho-server=m
+CONFIG_PACKAGE_xmppc=m
+
+# WebGUI #
+CONFIG_PACKAGE_sulu=y
+
+
+############
+# Network #
+##########
+
+# Protocols #
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_atftp=m
-CONFIG_PACKAGE_atftpd=m
-CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_getopt=y
 CONFIG_PACKAGE_gre=y
-CONFIG_PACKAGE_icwmp=y
-CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-topology=y
-CONFIG_PACKAGE_mosquitto-client-ssl=y
-CONFIG_PACKAGE_mosquitto-ssl=y
-CONFIG_PACKAGE_wfadatad=y
-CONFIG_PACKAGE_wfadatad-collector=y
-CONFIG_PACKAGE_imonitor=m
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
-CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
-CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libreswan=m
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_luci-nginx=y
-# CONFIG_LUCI_JSMIN is not set
-# CONFIG_LUCI_CSSTIDY is not set
-CONFIG_PACKAGE_luci-mod-dashboard=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
 CONFIG_PACKAGE_map=y
-CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_PACKAGE_owsd=y
-CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
 CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_rdnssd=y
 CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rpcd-mod-rpcsys=y
-CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_sulu=y
-CONFIG_PACKAGE_swmodd=m
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_uledd=y
 CONFIG_PACKAGE_umbim=y
 CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_urlfilter=y
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_uspd=y
-CONFIG_PACKAGE_vsftpd-tls=m
 CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_wifimngr=y
-CONFIG_PACKAGE_uuidgen=y
 CONFIG_PACKAGE_xl2tpd=y
+
+# Services #
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
+CONFIG_PACKAGE_ddns-scripts=y
+CONFIG_PACKAGE_dnsmasq=y
+CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_mosquitto-client-ssl=y
+CONFIG_PACKAGE_mosquitto-ssl=y
+CONFIG_PACKAGE_nginx=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_PACKAGE_qos-scripts is not set
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_vsftpd-tls=m
+
+# Tools and Utilities #
+CONFIG_PACKAGE_curl=y
+CONFIG_PACKAGE_libcurl=y
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+# CONFIG_LIBCURL_MBEDTLS is not set
+CONFIG_LIBCURL_OPENSSL=y
+CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_ip-full=y
+CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_ipset=y
+CONFIG_PACKAGE_iptables-legacy=y
+CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
+CONFIG_PACKAGE_iptables-mod-filter=y
+CONFIG_PACKAGE_iptables-mod-ipopt=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_resolveip=y
+CONFIG_PACKAGE_tcpdump=y
+CONFIG_PACKAGE_traceroute6=y
+
+
+############
+# System  #
+##########
+
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_getopt=y
+# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_jq=y
+CONFIG_PACKAGE_libustream-openssl=y
+# CONFIG_PACKAGE_libustream-wolfssl is not set
+CONFIG_PACKAGE_lscpu=y
+CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_OPENSSL_WITH_COMPRESSION=y
+CONFIG_PACKAGE_procd-ujail=m
+CONFIG_PACKAGE_rpcd=y
+CONFIG_PACKAGE_rpcd-mod-rpcsys=y
+CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_uledd=y
+# The urandom-seed package is very strange. It seeds urandom with urandom...
+# Disable it. Most SoCs nowadays has HW random generators anyway.
+# CONFIG_PACKAGE_urandom-seed is not set
+# CONFIG_PACKAGE_urngd is not set
+CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_uuidgen=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="IOPSYS"
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-CONFIG_BUILD_LOG=y
+
+
+################
+# LuCI WebGUI #
+##############
+
+# BEGIN: luci-nginx metapackage with some changes
+# We do not want libiwinfo-lua on non-WiFi targets, but it is already
+# depended on by other luci-packages, so no need to take it in explicitly
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-opkg=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+# CONFIG_LUCI_JSMIN is not set
+# CONFIG_LUCI_CSSTIDY is not set
+CONFIG_PACKAGE_luci-mod-dashboard=y
+CONFIG_PACKAGE_luci-theme-openwrt-2020=y
+CONFIG_PACKAGE_nginx-mod-luci=y
+
+
+############
+# BusyBox #
+##########
+
+CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
@@ -120,6 +224,7 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+# CONFIG_BUSYBOX_CONFIG_IP is not set
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
@@ -183,40 +288,10 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_SIGNED_PACKAGES is not set
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
 
-# Generation of /etc/banner.
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="iopsysWrt"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-
-# Disable as much as possible of OpenWrt messy "pre-init" stuff.
-CONFIG_PREINITOPT=y
-# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
-CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
-CONFIG_TARGET_PREINIT_TIMEOUT=1
-# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
-# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
-CONFIG_TARGET_PREINIT_IFNAME=""
-CONFIG_TARGET_PREINIT_IP=""
-CONFIG_TARGET_PREINIT_NETMASK=""
-CONFIG_TARGET_PREINIT_BROADCAST=""
-
-# Generate rootfs tar file
-CONFIG_TARGET_ROOTFS_TARGZ=y
-
-# The urandom-seed package is very strange. It seeds urandom with urandom...
-# Disable it. Most SoCs nowadays has HW random generators anyway.
-# CONFIG_PACKAGE_urandom-seed is not set
-# CONFIG_PACKAGE_urngd is not set
-
-# We use OpenSSL, no need to ship multiple TLS libraries
-CONFIG_PACKAGE_libustream-openssl=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set
+# Use fw3 iptables-based instead of newer nftables-based fw4
+# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
+# Enabling luci-app-firewall enables fw4
+# CONFIG_PACKAGE_luci-app-firewall is not set
+CONFIG_PACKAGE_firewall=y
+# CONFIG_PACKAGE_firewall4 is not set

iop/scripts/feeds_update.sh

@@ -2,58 +2,65 @@
 
 function feeds_update {
 
-    developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
+	developer=0
+	override=1
+	start=$(date -u +'%s')
+	while getopts "n" opt; do
+		case $opt in
+		n)
+			override=0
+			;;
+		esac
+	done
 
+	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-    git remote -v | grep -qE '(git@|ssh://)' && developer=1
+	cp .config .genconfig_config_bak
 
-    cp .config .genconfig_config_bak
-
-    #if -d argument is passed, clone feeds with ssh instead of http
-    if [ $developer == 1 ]; then
-	./scripts/feeds update -g
-    else
-	./scripts/feeds update
-    fi
+	#if -d argument is passed, clone feeds with ssh instead of http
+	if [ $developer == 1 ]; then
+		./scripts/feeds update -g
+	else
+		./scripts/feeds update
+	fi
 	./scripts/feeds update -ai
 
-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
+	# replace core packages with iopsys versions
+	if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-    fi
+	fi
 
-    # targets need to be installed explicitly
-    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek iopsys-econet"
-    for target in $targets
-    do
-	rm -f target/linux/$target
-	./scripts/feeds install -p targets $target
-    done
+	# targets need to be installed explicitly
+	for target in $(ls ./feeds/targets); do
+		rm -f target/linux/$target
+		./scripts/feeds install -p targets $target
+	done
 
-    # install all packages
-    ./scripts/feeds install -a
+	# Workaround for bug in 22.03.0-rc4 where installed target path has been
+	# moved to target/linux/feeds but Config.in and Makefile from installed
+	# targets are not properly included from the new location.
+	# This hack is to be removed once the issues are fixed.
+	# Note that the above block of code might no longer necessary because
+	# targets no longer need to be installed explicitly.
+	echo "Working around installed-target-bug"
+	for f in target/linux/feeds/*; do
+		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
+	done
 
-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
+	# install all packages
+	./scripts/feeds install -a
 
-    cp .genconfig_config_bak .config
-    make defconfig
+	# remove broken symlinks ( for packages that are no longer in the feed )
+	find -L package/feeds -maxdepth 2 -type l -delete
 
-    # record when we last run this script
-    touch tmp/.iop_bootstrap
+	cp .genconfig_config_bak .config
+	make defconfig
 
-    # always return true
-    exit 0
+	# record when we last run this script
+	touch tmp/.iop_bootstrap
+
+	# always return true
+	exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
-

iop/scripts/genconfig.sh

@@ -13,11 +13,11 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	econet="target/linux/iopsys-econet"
-	x86="target/linux/iopsys-x86"
-	armvirt="target/linux/iopsys-armvirt"
+	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
+	ramips="target/linux/feeds/iopsys-ramips"
+	econet="target/linux/feeds/iopsys-econet"
+	x86="target/linux/feeds/iopsys-x86"
+	armvirt="target/linux/feeds/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -83,8 +83,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
-			local targetpath="./target/linux/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
+			local targetpath="./target/linux/feeds/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -328,6 +328,7 @@ function genconfig {
 			subtarget="en7562"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config

iop/scripts/genconfig_min.sh

@@ -12,11 +12,11 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
-	ramips="target/linux/iopsys-ramips"
-	econet="target/linux/iopsys-econet"
-	x86="target/linux/iopsys-x86"
-	armvirt="target/linux/iopsys-armvirt"
+	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
+	ramips="target/linux/feeds/iopsys-ramips"
+	econet="target/linux/feeds/iopsys-econet"
+	x86="target/linux/feeds/iopsys-x86"
+	armvirt="target/linux/feeds/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -82,8 +82,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
-			local targetpath="./target/linux/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
+			local targetpath="./target/linux/feeds/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -319,6 +319,7 @@ function genconfig_min {
 			subtarget="en7562"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
 		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config

libjwt/Makefile

@@ -1,54 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-PKG_LICENSE:=LGPLv3
-PKG_LICENSE_FILES:=COPYING
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

libmicroxml/Makefile

@@ -1,57 +0,0 @@
-#
-# Copyright (C) 2012-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libmicroxml
-PKG_VERSION:=2012-06-11
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mirror/microxml.git
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_LICENSE:=LGPL-2.0
-PKG_LICENSE_FILES:=COPYING
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libmicroxml
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=XML library
-  MAINTAINER:=Luka Perkov <luka@openwrt.org>
-endef
-
-define Package/libmicroxml/description
- A micro sized XML library
-endef
-
-CONFIGURE_ARGS += \
-	--disable-threads \
-	--enable-static \
-	--enable-shared
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
-endef
-
-define Package/libmicroxml/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -1,130 +0,0 @@
-diff --git a/mxml-file.c b/mxml-file.c
-index 02eca9d..f10d202 100644
---- a/mxml-file.c
-+++ b/mxml-file.c
-@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
-   * Write the node...
-   */
- 
--  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
-+  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
-+    global_free(global);
-     return (-1);
--
-+  }
-+  
-+  global_free(global);
-   if (col > 0)
-     if (putc('\n', fp) < 0)
-       return (-1);
-@@ -1448,6 +1451,7 @@ mxml_load_data(
-   if ((buffer = malloc(64)) == NULL)
-   {
-     mxml_error("Unable to allocate string buffer!");
-+    global_free(global);
-     return (NULL);
-   }
- 
-@@ -2083,11 +2087,12 @@ mxml_load_data(
- 		 node->parent ? node->parent->value.element.name : "(null)");
- 
-       mxmlDelete(first);
--
-+      global_free(global);
-       return (NULL);
-     }
-   }
- 
-+  global_free(global);
-   if (parent)
-     return (parent);
-   else
-@@ -2102,7 +2107,7 @@ error:
-   mxmlDelete(first);
- 
-   free(buffer);
--
-+  global_free(global);
-   return (NULL);
- }
- 
-diff --git a/mxml-private.c b/mxml-private.c
-index 4378ca3..ea6e452 100644
---- a/mxml-private.c
-+++ b/mxml-private.c
-@@ -41,6 +41,32 @@
-  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
-  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
-  */
-+void *global_mem[16] = {0};
-+
-+static void *global_calloc(int x, int size)
-+{
-+  int i;
-+  void *m = calloc(x, size);
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
-+    global_mem[i] = global_mem[i-1];
-+  }
-+  global_mem[0] = m;
-+  return m;
-+}
-+
-+void global_free(void *m)
-+{
-+  int i;
-+  if (m == NULL)
-+    return;
-+  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
-+    if (global_mem[i] == m) {
-+      global_mem[i] = NULL;
-+      free(m);
-+      break;
-+    }
-+  }
-+}
- 
- #if defined(__sun) || defined(_AIX)
- #  pragma fini(_mxml_fini)
-@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
-   return (MXML_REAL);
- }
- 
--
- #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
- #  include <pthread.h>
- 
-@@ -190,7 +215,6 @@ _MXML_FINI(void)
-   }
- }
- 
--
- /*
-  * '_mxml_global()' - Get global data.
-  */
-@@ -205,7 +229,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
-     pthread_setspecific(_mxml_key, global);
- 
-     global->num_entity_cbs = 1;
-@@ -288,7 +312,7 @@ _mxml_global(void)
- 
-   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
-   {
--    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
-+    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
- 
-     global->num_entity_cbs = 1;
-     global->entity_cbs[0]  = _mxml_entity_cb;
-diff --git a/mxml-private.h b/mxml-private.h
-index c591208..72ed338 100644
---- a/mxml-private.h
-+++ b/mxml-private.h
-@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
- extern _mxml_global_t	*_mxml_global(void);
- extern int		_mxml_entity_cb(const char *name);
- 
-+extern void global_free(void *m);

libtrace/Makefile

@@ -1,7 +1,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libtrace
-PKG_VERSION:=3.0.22
+PKG_VERSION:=3.0.23
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
@@ -72,11 +72,11 @@ endef
 
 define Package/libtrace/install    
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libtrace.so.* $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libwandio.so.* $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.so.* $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libtrace.so.* $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libwandio.so.* $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump.so.* $(1)/usr/lib/
 	$(INSTALL_DIR) $(1)/usr/lib/libpacketdump
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump/*.so* $(1)/usr/lib/libpacketdump/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libpacketdump/*.so* $(1)/usr/lib/libpacketdump/
 endef
 
 define Package/libtrace-tools/install    

map-agent/Config.in

@@ -6,5 +6,12 @@ config AGENT_SYNC_DYNAMIC_CNTLR_CONFIG
 	bool "Support Dynamic Controller configuration sync"
 	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
 
+config AGENT_ISLAND_PREVENTION
+	bool "Support Island Prevention"
+	default y if MULTIAP_AGENT_ISLAND_PREVENTION
+
+config AGENT_EASYMESH_R2_CERT
+	bool "Compile for WFA test bed"
+
 endmenu
 endif

map-agent/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2020-21 IOPSYS Software Solutions AB
+# Copyright (C) 2020-22 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=7.1.10
+PKG_VERSION:=2.9.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=8d2fa1af3b0cbdb65f791b490e72c5925cccaa05
+PKG_SOURCE_VERSION:=e2d427d44bf4e418487fa5fe6be4838ca448a92f
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
-PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
@@ -56,12 +56,21 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-Wno-error=deprecated-declarations \
 	-D_GNU_SOURCE
 
 ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DAGENT_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
 
+ifeq ($(CONFIG_AGENT_ISLAND_PREVENTION),y)
+TARGET_CFLAGS += -DAGENT_ISLAND_PREVENTION
+endif
+
+ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
+TARGET_CFLAGS += -DEASYMESH_R2_CERT
+endif
+
 MAKE_PATH:=src
 
 define Package/map-agent/install

map-agent/files/etc/config/mapagent

@@ -1,34 +1,132 @@
 config agent 'agent'
 	option enabled '1'
-	option debug '6'
+	option debug '0'
 	option profile '2'
 	option al_bridge 'br-lan'
+	option netdev 'wlan'
+	option island_prevention '0'
+	option eth_onboards_wifi_bhs '0'
+#	option controller_macaddr '0a:1b:2c:3d:4e:50'
 
+config dynamic_backhaul
+	option missing_bh_timer '60'
+	option missing_bh_reconfig_timer '1800'
+
+config controller_select
+	option id 'auto'
+	option probe_int '20'
+	option retry_int '9'
+	option autostart '1'
+	option local '0'
+
+config radio
+	option device 'phy0'
+	option band '2'
+# options below are auto-generated during onboarding
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '70'
+#	option report_rcpi_threshold '80'
+#	option rcpi_hysteresis_margin '0'
+#	option report_util_threshold '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'
+
+config radio
+	option device 'phy1'
+	option band '5'
+# options below are auto-generated during onboarding
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '86'
+#	option report_rcpi_threshold '96'
+#	option rcpi_hysteresis_margin '0'
+#	option report_util_threshold '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'
+
+config bsta
+	option enabled '1'
+	option ifname 'wlan0'
+	option band '2'
+	option device 'phy0'
+	option priority '2'
+# options below are auto-generated during onboarding
+#	option ssid 'MAP-BH-2.4GHz'
+#	option encryption 'sae-mixed'
+#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+#	option onboarded '1'
+#	option bssid '0a:1b:2c:3d:4e:53'
+#	option vid '1'
+
+config bsta
+	option enabled '1'
+	option ifname 'wlan1'
+	option band '5'
+	option device 'phy1'
+	option priority '0'
+# options below are auto-generated during onboarding
+#	option ssid 'MAP-BH-5GHz'
+#	option encryption 'sae-mixed'
+#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+#	option onboarded '1'
+#	option bssid '0a:1b:2c:3d:4e:54'
+#	option vid '1'
+
+# ap sections and policy section are
+# auto-generated during onboarding
+#
 #config ap
-#	option ifname 'wl0'
-#	option steer 'rssi bssload'
-#	list exclude '00:11:22:33:44:55'
-#	list exclude_btm '00:aa:bb:cc:dd:ee'
-#	list assoc_ctrl '00:10:20:30:40:50'
-#	option btm_retry '3'
-#	option btm_retry_secs '180'
-#	option fallback_legacy '1'
-#	option steer_legacy_reassoc_secs '30'
-#	option steer_legacy_retry_secs '3600'
-#	option assoc_ctrl_secs '30'
-#	option band '2'
-#	option type 'fronthaul'
-
-#config ap
-#	option ifname 'wl1'
-#	option steer 'rssi bssload'
-#	list exclude '00:11:22:33:44:55'
-#	list exclude_btm '00:aa:bb:cc:dd:ee'
-#	option band '5'
-#	option type 'fronthaul'
-
-#config bsta
-#	option ifname 'apclii0'
 #	option enabled '1'
-#	option onboarded '0'
-#	option disallow_bsta '1		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)
+#	option ifname 'wlan0-1'
+#	option band '2'
+#	option device 'phy0'
+#	option type 'fronthaul'
+#	option ssid 'IOWRT-2.4GHz'
+#	option encryption 'sae-mixed+aes'
+#	option key '1234567890'
+#	option vid '1'
+
+#config ap
+#	option enabled '1'
+#	option ifname 'wlan0-2'
+#	option band '2'
+#	option device 'phy0'
+#	option type 'backhaul'
+#	option ssid 'MAP-BH-2.4GHz'
+#	option encryption 'sae+aes'
+#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+#	option disallow_bsta '0'
+#	option vid '1'
+
+#config ap
+#	option enabled '1'
+#	option ifname 'wlan1-1'
+#	option band '5'
+#	option device 'phy1'
+#	option type 'fronthaul'
+#	option ssid 'IOWRT-5GHz'
+#	option encryption 'sae-mixed+aes'
+#	option key '1234567890'
+#	option vid '1'
+
+#config ap
+#	option enabled '1'
+#	option ifname 'wlan1-2'
+#	option band '5'
+#	option device 'phy1'
+#	option type 'backhaul'
+#	option ssid 'MAP-BH-5GHz'
+#	option encryption 'sae+aes'
+#	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+#	option disallow_bsta '0'
+#	option vid '1'
+
+#config policy
+#	option report_interval '0'
+#	option pvid '1'
+#	option pcp_default '0'
+#	option report_scan '0'
+#	option report_sta_assocfails '0'
+#	option report_sta_assocfails_rate '0'
+

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -1,22 +1,78 @@
 #!/bin/sh
 
-wan=$(db -q get hw.board.ethernetWanPort)
-MAPFILE="/tmp/multiap.backhaul"
+. /lib/network/utils.sh
 
+conn_ports_file="/tmp/map.connected.ports"
+map_bh_file="/tmp/multiap.backhaul"
+al_bridge="$(uci -q get mapagent.agent.al_bridge)"
+[ "${al_bridge:0:3}" = "br-" ] || exit 0
+al_brnet="${al_bridge:3}"
 
-[ -z "$wan" ] && exit 1 # no configuration
-[ "$PORT" != "$wan" ] && exit 0
+# Exit if the PORT is not member of the AL Bridge
+[ "$(get_network_of $PORT)" = "$al_brnet" ] || exit 0
+
+############## Dynamic Backhaul Daemon ##############
+if [ -n "$(which dynbhd)" ]; then
+	pidof dynbhd >/dev/null && exit 0 # dynbhd is managing the links
+
+	if [ ! -f $conn_ports_file ]; then
+		touch $conn_ports_file
+		if [ "$LINK" = "up" ]; then
+			touch $conn_ports_file
+			echo "$PORT" > $conn_ports_file
+			brctl delif $al_bridge $PORT
+			#ubus call network.interface.lan remove_device "{\"name\":\"$PORT\"}"
+		fi
+	else
+		if [ "$LINK" = "up" ]; then
+			brctl delif $al_bridge $PORT
+			echo "$PORT" >> $conn_ports_file
+			#ubus call network.interface.lan remove_device "{\"name\":\"$PORT\"}"
+		else
+			sed -i -E "/(^|:)${PORT}(:|$)/d" $conn_ports_file
+			#ubus call network.interface.lan add_device "{\"name\":\"$PORT\"}"
+			brctl addif $al_bridge $PORT
+			[ "$(cat $conn_ports_file | wc -c)" = "0" ] && rm -f $conn_ports_file
+		fi
+	fi
+
+	exit 0
+fi
+########################################################
+
+################ Dedicated ETH WAN Port ################
+wanport="$(db -q get hw.board.ethernetWanPort)"
+if [ -n "$wanport" ]; then
+	[ "$wanport" = "$PORT" ] || exit 0
+########################################################
+else
+#################### DHCP Discovery ####################
+	[ "$(uci -q get network.${al_brnet}.proto)" == "dhcp" ] || exit 0
+
+	if [ "$LINK" = "up" ]; then
+		brctl delif $al_bridge $PORT
+
+		udhcpc -qnRoC -i $PORT >/dev/null 2>&1 && dhcp=1
+
+		brctl addif $al_bridge $PORT
+
+		[ $dhcp -eq 1 ] || exit 0
+	else
+		[ -f $map_bh_file ] || exit 0
+		cur_bh="$(cat $map_bh_file  | jsonfilter -e @.ifname)"
+		[ "$cur_bh" = "$PORT" ] || exit 0
+	fi
+########################################################
+fi
 
 remove_from_bridge() {
 	config_get ifname "$section" ifname
-
-	ubus call network.interface.$bridge remove_device '{"name":"$ifname"}'
+	[ -n "$ifname" ] && ubus call network.interface.${al_brnet} remove_device '{"name":"$ifname"}'
 }
 
 update_bstas() {
-	local section="$1"
-	local action="$2"
-	local ifname onboarded
+	section="$1"
+	action="$2"
 
 	config_get ifname "$section" ifname
 	config_get_bool enabled "$section" enabled 0
@@ -34,16 +90,16 @@ update_bstas() {
 }
 
 if [ "$LINK" = "up" ]; then
-	#touch "$MAPFILE"
-
+	#touch "$map_bh_file"
 	config_load "mapagent"
-	bridge=$(uci get mapagent.agent.al_bridge | cut -d '-' -f2)
-	config_foreach remove_from_bridge bsta $bridge
+	config_foreach remove_from_bridge bsta
 	config_foreach update_bstas bsta down
 
 	/lib/wifi/multiap set_uplink "eth" "$PORT"
 else
-	rm -f "$MAPFILE"
+	/lib/wifi/multiap unset_uplink "eth"
+	#rm -f "$map_bh_file"
 	config_load "mapagent"
 	config_foreach update_bstas bsta up
+
 fi

map-agent/files/etc/init.d/mapagent

@@ -59,7 +59,7 @@ remove_map() {
 }
 
 start_dynbhd_service() {
-	rm -f /tmp/map.agent.bsta_global_disable
+	rm -f /tmp/multiap.backhaul
 	procd_open_instance
 	procd_set_param command "/usr/sbin/dynbhd"
 	procd_set_param respawn
@@ -79,7 +79,10 @@ validate_agent_section() {
 		'netdev:string' \
 		'vlan_segregation:bool:false' \
 		'resend_num:uinteger:0' \
-		'dyn_cntlr_sync:bool:true'
+		'dyn_cntlr_sync:bool:true' \
+		'island_prevention:bool:false' \
+		'eth_onboards_wifi_bhs:bool:false'
+
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of agent section failed"
@@ -113,7 +116,7 @@ validate_ap_section() {
 	uci_validate_section mapagent $section "${1}" \
 			'ifname:string' \
 			'device:string' \
-			'band:or("2", "5")' \
+			'band:or("2", "5", "6")' \
 			'enabled:bool:true' \
 			'onboarded:bool:false' \
 			'ssid:string' \
@@ -139,14 +142,15 @@ validate_radio_section() {
 			'configured:bool:false' \
 			'onboarded:bool:false' \
 			'dedicated_backhaul:bool:false' \
-            'steer_policy:range(0,255)' \
+			'steer_policy:range(0,255)' \
 			'util_threshold:range(0,255)' \
 			'rcpi_threshold:range(0,255)' \
 			'report_rcpi_threshold:range(0,255)' \
 			'include_sta_stats:bool:false' \
 			'include_sta_metric:bool:false' \
 			'rcpi_hysteresis_margin:range(0,255)' \
-			'report_util_threshold:range(0,255)'
+			'report_util_threshold:range(0,255)' \
+			'encryption:or("sae", "psk2", "sae-mixed")'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of radio section failed"
@@ -178,14 +182,31 @@ validate_policy_section() {
 	return 0
 }
 
+validate_dyn_bh_section() {
+	local section="$1"
+
+	uci_validate_section mapagent $section "${1}" \
+			'missing_bh_timer:range(1,255)'
+	uci_validate_section mapagent $section "${1}" \
+			'missing_bh_reconfig_timer:range(0,65535)'
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "mapagent" "Validation of dynamic backhaul section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
+}
+
 validate_agent_config() {
 	IS_CFG_VALID=1
 
 	validate_agent_section &&
 		config_foreach validate_cs_section controller_select &&
 		config_foreach validate_ap_section ap &&
-        config_foreach validate_radio_section radio &&
-        config_foreach validate_policy_section policy
+		config_foreach validate_radio_section radio &&
+		config_foreach validate_policy_section policy &&
+		config_foreach validate_dyn_bh_section dynamic_backhaul
 
 	[ "$IS_CFG_VALID" -ne 1 ] && {
 		logger -s -t "mapagent" "Validation of mapagent UCI file failed"
@@ -213,7 +234,7 @@ start_service() {
 	[ "$ts" -eq 1 ] && create_map #|| remove_map
 
 	procd_open_instance
-        procd_set_param command "/usr/sbin/mapagent" "-d"
+	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1

map-agent/files/etc/uci-defaults/991-map-agent-unset-pvid

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+unset_pvid() {
+	local section=$1
+
+	uci -q set mapagent.${section}.pvid="0"
+}
+
+config_load mapagent
+
+config_foreach unset_pvid policy

map-agent/files/lib/wifi/multiap

@@ -55,7 +55,7 @@ get_type_by_section() {
 	echo "$(type_to_multi_ap $type)"
 }
 
-brcm_sync_credentials() {
+sync_credentials() {
 	bands=""
 	json_init
 	mapagent_process_fh() {
@@ -160,7 +160,7 @@ brcm_sync_credentials() {
 	json_cleanup
 }
 
-brcm_write_credentials() {
+write_credentials() {
 	config_load mapagent
 
 	mapagent_apply_wireless() {
@@ -207,7 +207,7 @@ brcm_write_credentials() {
 		#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
 
 		# subshell in hopes to maintain mapagent config loaded
-		echo $(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key") 2> /dev/null
+		(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key")
 	}
 
 	mapagent_find_bbss() {
@@ -250,7 +250,7 @@ brcm_write_credentials() {
 	uci commit wireless
 }
 
-brcm_set_network() {
+set_network() {
 	local ifname=$1
 	local num=$2
 	local bssid=$3
@@ -293,7 +293,13 @@ write_bsta_config() {
 
 			[ "$bsta" == "$ifname" ] || return
 			#echo setting diff = $diff > /dev/console
+			old_bssid="$(uci -q get wireless.${section}.bssid)"
+
+			[ "$old_bssid" == "$bssid" ] && break
+
 			uci -q set wireless.${section}.bssid=$bssid
+			wpa_cli -i "$bsta" set_n 0 bssid $bssid
+			wpa_cli -i "$bsta" save_config
 			echo 1
 		}
 		config_load wireless
@@ -350,14 +356,14 @@ write_bsta_config() {
 
 	#echo result diff = $diff > /dev/console
 	[ "$diff" == "1" ] && {
-		config_foreach mapagent_apply_bssid_same_band bsta
-		ubus call uci commit '{"config":"wireless"}'
+		(config_foreach mapagent_apply_bssid_same_band bsta)
+		#ubus call uci commit '{"config":"wireless"}'
 		#echo reloading wireless > /dev/console
 	}
 
 }
 
-brcm_teardown_iface() {
+teardown_iface() {
 	config_load mapagent
 
 	local iface=$1
@@ -371,7 +377,7 @@ brcm_teardown_iface() {
 
 			[ "$ifname" != "$map_ifname" ] && return
 
-			uci -q set wireless.${section}.start_disabled="1"
+			uci -q set wireless.${section}.disabled="1"
 			uci -q set wireless.${section}.ssid="DISABLED-SSID"
 			uci -q set wireless.${section}.key="DISABLED-KEY"
 			uci -q delete wireless.${section}.multi_ap_backhaul_ssid
@@ -400,7 +406,7 @@ brcm_teardown_iface() {
 		uci -q set mapagent.${section}.key="DISABLED-KEY"
 
 		# subshell in hopes to maintain mapagent config loaded
-		$(mapagent_teardown_wireless $ifname)
+		(mapagent_teardown_wireless $ifname)
 	}
 
 
@@ -410,7 +416,7 @@ brcm_teardown_iface() {
 	uci commit mapagent
 }
 
-brcm_bsta_to_wireless() {
+bsta_to_wireless() {
 	config_load mapagent
 
 	mapagent_find_lowest_prio_onboarded() {
@@ -464,7 +470,7 @@ brcm_bsta_to_wireless() {
 				uci -q set wireless.${section}.key="$key"
 				uci -q set wireless.${section}.encryption=$encryption
 				uci -q set wireless.${section}.bssid="$bssid"
-				#uci -q set wireless.${section}.disabled=$disabled
+				uci -q set wireless.${section}.default_disabled='0'
 
 				[ "$disabled" != "1" ] && return
 				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
@@ -482,10 +488,12 @@ brcm_bsta_to_wireless() {
 
 		mapagent_find_other_creds() {
 			#echo "trying to find other creds for $2" > /dev/console
+			local other_section="$2"
+
 			config_get band $1 band
 			config_get onboarded $1 onboarded "0"
 
-			[ "$3" != "$band" -o "$onboarded" = "0" ] && return
+			[ "$4" != "$band" -o "$onboarded" = "0" ] && return
 
 			config_get ssid $1 ssid
 			config_get key $1 key
@@ -493,7 +501,12 @@ brcm_bsta_to_wireless() {
 			config_get enabled $1 enabled "0"
 			config_get bssid $1 bssid
 
-			echo $(mapagent_apply_wl_bsta $2 "$ssid" "$key" $encryption $4 "$bssid")
+			uci -q set mapagent.${other_section}.ssid="$ssid"
+			uci -q set mapagent.${other_section}.key="$key"
+			uci -q set mapagent.${other_section}.encryption=$encryption
+			uci -q set mapagent.${other_section}.bssid="$bssid"
+			uci commit mapagent
+			(mapagent_apply_wl_bsta "$3" "$ssid" "$key" $encryption "$5" "$bssid")
 		}
 
 		config_get band $1 band
@@ -502,14 +515,14 @@ brcm_bsta_to_wireless() {
 		config_get enabled $1 enabled "0"
 
 		if [ "$onboarded" = "0" ]; then
-			config_foreach mapagent_find_other_creds bsta $ifname $band $enabled
+			config_foreach mapagent_find_other_creds bsta $1 $ifname $band $enabled
 		else
 			config_get ssid $1 ssid
 			config_get key $1 key
 			config_get encryption $1 encryption
 			config_get bssid $1 bssid
 
-			echo $(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
+			(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
 		fi
 	}
 
@@ -528,6 +541,7 @@ brcm_bsta_to_wireless() {
 	diff=$(config_foreach mapagent_bsta_to_wireless bsta)
 
 #	[ "$diff" != "" ] && {
+
 		ubus call uci commit '{"config":"wireless"}'
 #	}
 }
@@ -622,27 +636,43 @@ sync_mapcontroller_from_wireless() {
 }
 
 bsta_scan_on_enabled() {
-	config_load mapagent
+	local onboarded_bands=""
+
+	mapagent_onboarded_bands() {
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onboarded" = "0" ] && return
+
+		onboarded_bands="$onboarded_bands $band"
+	}
 
 	mapagent_enable_bk() {
 		config_get ifname $1 ifname
+		config_get band $1 band
 		config_get enabled $1 enabled
 
-		echo ifname $ifname enabled $enabled
-
 		[ "$enabled" = "0" ] && return
 
-		wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
-		wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
-		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		for onboarded_band in $onboarded_bands
+		do
+			[ "$onboarded_band" != "$band" ] && continue
+
+			logger -t multiap "bsta_scan_on_enabled $ifname $band"
+			wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
+			wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
+			wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		done
 	}
 
+	config_load mapagent
+	config_foreach mapagent_onboarded_bands bsta
 	config_foreach mapagent_enable_bk bsta
 }
 
 bsta_enable_all() {
 	mapagent_enable_bk() {
-		config_get ifname $1 ifname "2"
+		config_get ifname $1 ifname
 		uci -q set mapagent.$1.enabled="1"
 	}
 
@@ -653,6 +683,58 @@ bsta_enable_all() {
 	bsta_scan_on_enabled
 }
 
+bsta_clear_all_bssid() {
+	mapagent_remove_bssid() {
+		uci -q set mapagent.$1.enabled="1"
+		uci -q del mapagent.$1.bssid
+	}
+
+	wireless_remove_bssid() {
+		config_get mode $1 mode
+		config_get ifname $1 ifname
+
+		[ "$mode" != "sta" ] && return
+
+		uci -q del wireless.$1.bssid
+		wpa_cli -i "$ifname" bssid 0 00:00:00:00:00:00 > /dev/null 2>&1
+		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+	}
+
+	config_load mapagent
+	config_foreach mapagent_remove_bssid bsta
+	uci commit mapagent
+
+	config_load wireless
+	config_foreach wireless_remove_bssid wifi-iface
+	uci commit wireless
+}
+
+# arg1 = ifname arg2 = bssid
+bsta_blacklist_bssid_set() {
+	local ifname="$1"
+	shift
+	local bssid="$@"
+
+	return
+
+	wpa_cli -i "$ifname" set_network 0 bssid_ignore "$bssid" > /dev/null 2>&1
+	wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+}
+
+bsta_blacklist_bssid_clear() {
+	mapagent_blacklist_by_band() {
+		config_get ifname $1 ifname
+
+		wpa_cli -i "$ifname" set_network 0 bssid_ignore "" > /dev/null 2>&1
+		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+	}
+
+	return
+
+	config_load mapagent
+	config_foreach mapagent_blacklist_by_band bsta
+}
+
 bsta_disable_lower_priority() {
 	config_load mapagent
 
@@ -702,7 +784,7 @@ bsta_disable_lower_priority() {
 
 		uci -q set mapagent.$1.enabled="$enabled"
 
-		echo $(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
+		(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
 	}
 
 	local bsta=$1
@@ -751,11 +833,14 @@ set_uplink_backhaul_info() {
 	local ul_1905id=$1
 	local ul_mac=$2
 
-	json_load "$(cat $MAPFILE)"
-	json_add_string "backhaul_device_id" "$ul_1905id"
-	json_add_string "backhaul_macddr" "$ul_mac"
-	json_dump > "$MAPFILE"
-	json_cleanup
+	(
+		flock -x 200
+		json_load "$(cat $MAPFILE)"
+		json_add_string "backhaul_device_id" "$ul_1905id"
+		json_add_string "backhaul_macddr" "$ul_mac"
+		json_dump > "$MAPFILE"
+		json_cleanup
+	) 200>/var/lock/map.backhaul.lock
 }
 
 set_uplink() {
@@ -769,31 +854,63 @@ set_uplink() {
 	json_add_string "type" "$type"
 	json_add_string "ifname" "$ifname"
 	json_add_string "macaddr" "$hwaddr"
-	json_dump > "$MAPFILE"
+	(
+		flock -x 200
+		json_dump > "$MAPFILE"
+	) 200>/var/lock/map.backhaul.lock
 	json_cleanup
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":true, "prevent_island":true, "ifname":"all"}'
+	fi
+
 }
 
 unset_uplink() {
-	rm "$MAPFILE" > /dev/null 2>&1
+	local type=${1:-wifi}
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":false, "prevent_island":true, "ifname":"all"}'
+	fi
+
+	(
+		flock -x 200
+		json_load "$(cat $MAPFILE)"
+		json_get_var bk_type type
+		json_cleanup
+
+		[ "$type" = "$bk_type" ] && rm -f "$MAPFILE" > /dev/null 2>&1
+	) 200>/var/lock/map.backhaul.lock
 }
 
 func=$1
 shift
 
 case "$func" in
-	wireless_teardown) brcm_wireless_teardown;;
-	setup_network) brcm_setup_network;;
-	setup_wireless) brcm_setup_wireless;;
-	write_credentials) brcm_write_credentials;;
-	sync_credentials) brcm_sync_credentials;;
+	wireless_teardown) wireless_teardown;;
+	setup_network) setup_network;;
+	setup_wireless) setup_wireless;;
+	write_credentials) write_credentials;;
+	sync_credentials) sync_credentials;;
 	bsta_steer) bsta_steer $@;;
-	set_network) brcm_set_network $@;;
+	set_network) set_network $@;;
 	write_bsta_config) write_bsta_config $@;;
-	teardown_iface) brcm_teardown_iface $@;;
-	bsta_to_wireless) brcm_bsta_to_wireless $@;;
+	teardown_iface) teardown_iface $@;;
+	bsta_to_wireless) bsta_to_wireless $@;;
 	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
 	ts) ts_sub $@;;
 	bsta_enable_all) bsta_enable_all $@;;
+	bsta_clear_all_bssid) bsta_clear_all_bssid $@;;
+	bsta_blacklist_bssid_set) bsta_blacklist_bssid_set $@;;
+	bsta_blacklist_bssid_clear) bsta_blacklist_bssid_clear $@;;
 	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;
 	bsta_scan_on_enabled) bsta_scan_on_enabled $@;;
 	bsta_use_link) bsta_use_link $@;;

map-agent/files/lib/wifi/traffic_separation

@@ -2,6 +2,9 @@
 
 . /lib/functions.sh
 
+AL_BRIDGE=${AL_BRIDGE-"br-lan"}
+PRIMARY_VID=${PRIMARY_VID-1}
+
 ### Traffic Separation ###
 
 dbg() {
@@ -9,456 +12,157 @@ dbg() {
 }
 
 ts_sub() {
-
 	ts_usage() {
 		cat <<EOF
-Usage: $0 [create|delete|populate|primary|reload]
+Usage: $0 [create|reload]
 Traffic Separation related functions.
-create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
-create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
-create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethernet interface
-delete <iface>				- delete vlan device
-populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
-primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
-reload     				- reload network with new configuration
+create vid - create vlan configuration with vlan_id
+reload     - reload network with new configuration
 EOF
 	exit 1
 	}
 
-	_get_bridge() {
-		local bridge=$(ip link show $1 | grep -o "master [^\s]*" | cut -d ' ' -f 2)
-		echo $bridge
-	}
+	ts_create() {
+		_net_setup() {
+			local name=$1
+			local vid=$2
+			local proto=$3
+			local dev=$4
+			local port_dev=$5
 
-	set_wireless_bridge() {
-		config_load wireless
+			[ -z "$(uci -q get network.${name})" ] || return
 
-		_set_network() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
+			local ip_addr="192.168.${vid}.1"
+			local br_dev="${AL_BRIDGE/-/_}"
+			local tag=":t"
 
-			config_get ifname $sec ifname
-			[ "$iface" != "$ifname" ] && continue
+			[ "${vid}" = "${PRIMARY_VID}" ] && {
+				tag=""
 
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
+				# Global options
+				[ -z "$(uci -q get network.${br_dev}.vlan_filtering)" ] && {
+					uci -q set network.${br_dev}.vlan_filtering=1;
+				}
 
-			config_get network $sec network
-			local new_network=${bridge##br-}
-			if [ "$new_network" != "$network" ] ; then
-				uci -q set wireless.${sec}.network=${new_network}
-				uci commit wireless
+				uci -q delete network.lan.proto
+				uci -q delete network.lan.ipaddr
+				uci -q delete network.lan.netmask
+				uci -q delete network.lan.ip6assign
+			}
+
+			uci -q set network.${name}="interface"
+			uci -q set network.${name}.device="$dev"
+			uci -q set network.${name}.is_lan="1"
+
+			if [ "$proto" = "static" ] ; then
+				uci -q set network.${name}.proto="static"
+				# TODO vid > 255
+				uci -q set network.${name}.ipaddr="${ip_addr}"
+				uci -q set network.${name}.netmask="255.255.255.0"
+				uci -q set network.${name}.ip6assign '60'
+			else
+				uci -q set network.${name}.proto="dhcp"
 			fi
 
-			brctl addif $bridge $iface &> /dev/null
-		}
+			uci -q add network bridge-vlan
+			uci -q set network.@bridge-vlan[-1].device="$AL_BRIDGE"
+			uci -q set network.@bridge-vlan[-1].vlan="$vid"
 
-		config_foreach _set_network wifi-iface ${1} ${2}
-	}
-
-	ts_create() {
-
-		_create_vlan_dev() {
-			iface=$1				# real iface
-			vid=$2					# Vlan ID
-			bridge=$3				# bridge iface should be connected
-			vlan_dev=$4
-
-			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
-
-			# remove interface from bridge if it is in one
-			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
-
-			# (re)create vlan device
-			ip link show $vlan_dev && vlanctl --if-delete $vlan_dev
-			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
-
-			vlanctl --if $iface --tx --tags 0 --default-miss-drop
-			vlanctl --if $iface --tx --tags 1 --default-miss-drop
-			vlanctl --if $iface --tx --tags 2 --default-miss-drop
-			vlanctl --if $iface --rx --tags 0 --default-miss-drop
-			vlanctl --if $iface --rx --tags 1 --default-miss-drop
-			vlanctl --if $iface --rx --tags 2 --default-miss-drop
-
-			# bring the vlan device up and add back to bridge if it was in one
-			brctl addif $bridge $vlan_dev &> /dev/null
-		}
-
-		ts_create_fh() {
-			iface=$1				# fh iface
-			vid=$2					# SSID specific (secondary) or primary vid
-			bridge=$3
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
-				cat <<EOF
-Adding FH device requires IFACE, VID and bridge
-EOF
-				exit 1
-			}
-
-			# create vlan device
-			#set_wireless_bridge $iface $bridge
-
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
-
-			# add rules
-#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
-
-			# EAPOL frames
-			vlanctl --if $iface --rx --tags 0 --filter-ethertype 34958 --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --rx --tags 1 --filter-ethertype 34958 --pop-tag --set-rxif $vlan_dev --rule-append
-			vlanctl --if $iface --tx --tags 0 --filter-txif $vlan_dev --filter-ethertype 34958 --rule-append
-
-			# 8021q vlan id TAG/UNTAG
-			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
-			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
-
-			ip link set $iface up
-			ip link set $vlan_dev up
-		}
-
-		ts_create_bh() {
-			iface=$1				# bh iface
-			vid=$2					# primary vid
-			profile=$3				# agent profile (1 or 2)
-			bridge=$4				# bridge interface should be connected to
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
-				cat <<EOF
-Adding BH device requires IFACE, VID and PROFILE (1 or 2).
-EOF
-				exit 1
-			}
-
-			#[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
-
-			old_vid=$(wl -i $1 map_8021q_settings)
-			old_vid=${old_vid##* }
-			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
-
-			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
-
-			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
-			wl -i $iface down &> /dev/null
-			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
-			wl -i $iface map_8021q_settings $vid &> /dev/null	# can only be set on bBSS (read-only on bSTA)
-			wl -i $iface up &> /dev/null
-		}
-
-		ts_create_lei() {
-			vid=$1					# primary vid
-			pbits=$2				# default pbits to apply
-			vlan_bridge=$3				# name of ts subsystem bridge
-			lan_bridge=$4				# name of node local bridge
-
-			[ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
-				cat <<EOF
-Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
-EOF
-				exit 1
-			}
-
-			ip link show lei &> /dev/null || {
-				ip link add link lei name lei_lan type vlan id 1 2>/dev/null
-			}
-
-			old_vid=$(ip -d link show lei_lan | sed -n 's/vlan.*id \([0-9][0-9]*\) .*/\1/p')
-
-			[ "$old_vid" != "$vid" ] && {
-				ip link del lei_lan
-				ip link add link lei name lei_lan type vlan id ${vid}
-			}
-
-			brctl addif ${lan_bridge} lei_lan &>/dev/null
-			brctl addif ${vlan_bridge} lei_map &>/dev/null
-
-			ip link set lei up
-			ip link set lei_map up
-			ip link set lei_lan up
-		}
-
-		_create_eth() {
-			iface=$1				# Multi-AP Logical Ethernet Interface
-			vid=$2					# primary vid
-			bridge=$3				# name of ts subsystem bridge
-			pbits=0
-
-			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ] || {
-				cat <<EOF
-Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
-EOF
-				exit 1
-			}
-
-			dbg create $@
-
-			ip link set $iface down
-
-			vlan_dev=${iface}_vlan${vid}
-			ip link set $vlan_dev down
-			_create_vlan_dev $iface $vid $bridge $vlan_dev
-
-			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
-			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
-
-			[ $# -le 3 ] && exit 0
-			shift 3
-
-			while [ -n "$1" ] ; do
-				vid=$1
-				vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append
-				vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append
-				shift
+			for port in $(uci -q get network.${br_dev}.ports) ; do
+				echo $port | grep -q eth || continue
+				uci -q add_list network.@bridge-vlan[-1].ports="${port}${tag}"
 			done
 
-			ip link set $iface up
-			ip link set $vlan_dev up
+			uci -q add_list network.${br_dev}.ports="$port_dev"
+			uci -q add_list network.@bridge-vlan[-1].ports="$port_dev"
+
+			uci -q commit network
 		}
 
-		ts_create_eths() {
-			pvid=$1					# primary vid
-			bridge=$2				# name of ts subsystem bridge
+		_dhcp_setup() {
+			local name=$1
 
-			shift 2
-			# TODO use ieee1905 bridge
-			for iface in $(uci get network.br_lan.ports) ; do
-				[ "$iface" = "lei_lan" ] && continue
-				_create_eth $iface $pvid $bridge $@
-				ubus call ieee1905 del_interface "{\"ifname\":\"$iface\"}"
-			done
+			[ -n "$(uci -q get dhcp.${name})" ] && return
+
+			uci -q set dhcp.${name}=dhcp
+			uci -q set dhcp.${name}.interface="${name}"
+			uci -q set dhcp.${name}.start="100"
+			uci -q set dhcp.${name}.limit="150"
+			uci -q set dhcp.${name}.leasetime="1h"
+			uci -q set dhcp.${name}.dhcpv4="server"
+			uci -q set dhcp.${name}.dhcpv6="server"
+			uci -q set dhcp.${name}.ra="server"
+			uci -q set dhcp.${name}.ra_slaac="1"
+			uci -q add_list dhcp.${name}.ra_flags="managed-config"
+			uci -q add_list dhcp.${name}.ra_flags="other-config"
+
+			uci -q commit dhcp
 		}
 
-		ts_create_dhcp() {
-			local diff=""
+		_firewall_setup() {
+			local name=$1
+			local network=$1
+			local vid=$2
+			local zone_exist=0
 
-                        _net_setup() {
-				local name=$1
-				local devname=$2
-				local vid=$3
+			config_load firewall
 
-				[ -z "$(uci -q get network.${name})" ] && {
-					uci -q set network.${name}="interface"
-					uci -q set network.${name}.device="$devname"
-					uci -q set network.${name}.is_lan="1"
-					uci -q set network.${name}.proto="static"
-					# TODO vid > 255
-					local ip_addr="192.168.${vid}.1"
-					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
-					uci -q set network.${name}.ipaddr="${ip_addr}"
-					uci -q set network.${name}.netmask="255.255.255.0"
+			_process_zone() {
+				local section=$1
+				local new_name=$2
+				local name
 
-					diff="1"
-				}
+				config_get name $section name
 
-				[ "$diff" = "1" ] && uci -q commit network
+				[ "$name" == "$new_name" ] && zone_exist=1
 			}
 
-			_br_setup() {
-				local name=$1
-				local sinkname=$2
-				local vid=$3
+			config_foreach _process_zone zone $name
 
-				[ -z "$(uci -q get network.${name}_dev)" ] && {
-					uci -q set network.${name}_dev="device"
-					uci -q set network.${name}_dev.name="br-${name}"
-					uci -q set network.${name}_dev.type="bridge"
-					uci -q set network.${name}_dev.bridge_empty="1"
-					uci -q add_list network.${name}_dev.ports="${sinkname}"
+			[ "$zone_exist" != "0" ] && return
 
-					diff="1"
-				}
-
-				[ -z "$(uci -q get network.${name})" ] && {
-					uci -q set network.${name}="interface"
-					uci -q set network.${name}.device="br-${name}"
-					uci -q set network.${name}.is_lan="1"
-					uci -q set network.${name}.proto="static"
-					uci -q set network.${name}.ipaddr="192.168.${vid}.1"
-					uci -q set network.${name}.netmask="255.255.255.0"
-
-					diff="1"
-				}
-
-				[ "$diff" = "1" ] && uci -q commit network
+			[ "${vid}" = "${PRIMARY_VID}" ] && {
+				uci -q delete firewall.lan
 			}
 
-			_dhcp_setup() {
-				local name=$1
+			uci -q add firewall zone
+			uci -q set firewall.@zone[-1].name="$name"
+			uci -q add_list firewall.@zone[-1].network="$network"
+			uci -q set firewall.@zone[-1].input='ACCEPT'
+			uci -q set firewall.@zone[-1].output='ACCEPT'
+			uci -q set firewall.@zone[-1].forward='ACCEPT'
 
-				[ -n "$(uci -q get dhcp.${name})" ] && return
+			uci -q add firewall forwarding
+			uci -q set firewall.@forwarding[-1].src="$name"
+			uci -q set firewall.@forwarding[-1].dest="wan"
 
-				uci -q set dhcp.${name}=dhcp
-				uci -q set dhcp.${name}.interface="${name}"
-				uci -q set dhcp.${name}.start="100"
-				uci -q set dhcp.${name}.limit="150"
-				uci -q set dhcp.${name}.leasetime="1h"
-				uci -q set dhcp.${name}.dhcpv4="server"
-				uci -q set dhcp.${name}.dhcpv6="server"
-				uci -q set dhcp.${name}.ra="server"
-				uci -q set dhcp.${name}.ra_slaac="1"
-				uci -q add_list dhcp.${name}.ra_flags="managed-config"
-				uci -q add_list dhcp.${name}.ra_flags="other-config"
-
-				diff="1"
-				uci -q commit dhcp
-			}
-
-			_firewall_setup() {
-				local name=$1
-				local network=$2
-				local zone_exist=0
-
-				config_load firewall
-
-				_process_zone() {
-					local section=$1
-					local new_name=$2
-					local name
-
-					config_get name $section name
-
-					[ "$name" == "$new_name" ] && zone_exist=1
-				}
-
-				config_foreach _process_zone zone $name
-
-				[ "$zone_exist" != "0" ] && return
-
-				uci -q add firewall zone
-				uci -q set firewall.@zone[-1].name="$name"
-				uci -q add_list firewall.@zone[-1].network="$network"
-				uci -q set firewall.@zone[-1].input='ACCEPT'
-				uci -q set firewall.@zone[-1].output='ACCEPT'
-				uci -q set firewall.@zone[-1].forward='ACCEPT'
-
-				uci -q add firewall forwarding
-				uci -q set firewall.@forwarding[-1].src="$name"
-				uci -q set firewall.@forwarding[-1].dest="wan"
-
-				diff="1"
-				uci -q commit firewall
-			}
-
-			vid=$1					# primary vid
-
-			[ -n "$vid" ] || {
-				cat <<EOF
-VID required to configure DHCP.
-EOF
-				exit 1
-			}
-
-			ip link show sink${vid} || {
-				ip link add sink${vid} type veth peer name sink${vid}_vlan
-				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
-			}
-
-			ip link set sink${vid} up
-			ip link set sink${vid}_peer up
-			ip link set sink${vid}_vlan up
-
-			diff=""
-			_net_setup sink${vid} sink${vid}_peer ${vid}
-			_dhcp_setup sink${vid}
-			_firewall_setup lan${vid} sink${vid}
-
-			[ "$diff" = "1" ] && {
-				ubus call network reload
-				ubus -t 5 wait_for network.interface.sink${vid}
-			}
-
-			brctl addif br-map sink${vid}_vlan &> /dev/null
+			uci -q commit firewall
 		}
 
-	local type=$1
-	shift
+		vid=$1
 
-	case "$type" in
-		fh) ts_create_fh $@;;
-		bh) ts_create_bh $@;;
-		lei) ts_create_lei $@;;
-		eths) ts_create_eths $@;;
-		dhcp) ts_create_dhcp $@;;
-		--help|help) ts_usage;;
-		*) ts_usage; exit 1;;
-	esac
-	}
-
-	ts_delete() {
-		iface=$1
-
-		path=$(ls -d /sys/class/net/${iface}/upper_*)
-		[ -z "$path" ] && exit 0
-
-		vlan_dev=${path##*upper_}
-		bridge="$(_get_bridge $vlan_dev)"
-
-		[ -n "$bridge" ] && {
-			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
-			brctl addif $bridge $iface &> /dev/null # needed to add again
-                }
-
-	}
-
-	ts_populate() {
-		local type=$1
-		shift
-
-		[ "$type" == "eth" ] || {
+		[ -n "$vid" ] || {
 			cat <<EOF
-Populating ETH rules requires IFACE and VID.
+VID required to configure.
 EOF
 			exit 1
 		}
 
-		iface=$1				# Multi-AP Logical Ethernet Interface
-		vid=$2					# secondary vid
+		ip link show sink${vid} 2> /dev/null || {
+			ip link add sink${vid} type veth peer name sink_peer${vid}
+		}
 
-		path=$(ls -d /sys/class/net/${iface}/upper_*)
-		[ -z "$path" ] && exit 1
-		vlan_dev=${path##*upper_}
+		ip link set sink${vid} up
+		ip link set sink_peer${vid} up
 
-		# add rules
-		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
-		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
-	}
+		proto="dhcp"
+		[ -x "/usr/sbin/mapcontroller" ] && proto="static" ;
+		_net_setup "vlan${vid}" ${vid} ${proto} "sink${vid}" "sink_peer${vid}"
 
-	ts_primary() {
-		local func=$1
-		shift
-
-		case "$func" in
-			get) vid=$(wl -i $1 map_8021q_settings); echo ${vid##* };;
-			*) ts_usage; exit 1;;
-		esac
-	}
-
-	ts_unicast() {
-		local mac=$1
-		local iface=$2
-
-		# TODO: improve?
-		res=$(ebtables -t broute -L | grep -i "$mac" | grep "$iface")
-		[ -n "$res" ] && return
-
-		ebtables -t broute -D BROUTING -d "$mac" -p 0x893a -j DROP
-		ebtables -t broute -I BROUTING -i "$iface" -d "$mac" -p 0x893a -j DROP
-	}
-
-	ts_multicast() {
-		local iface=$1
-
-		# TODO: improve?
-		res=$(ebtables -t broute -L | grep -i "1:80:C2:00:00:13" | grep "$iface")
-		[ -n "$res" ] && return
-
-		ebtables -t broute -D BROUTING -d 01:80:C2:00:00:13 -p 0x893a -j DROP
-		ebtables -t broute -D BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
-		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		[ -x "/usr/sbin/mapcontroller" ] && {
+			_dhcp_setup vlan${vid}
+			_firewall_setup vlan${vid} ${vid}
+		}
 	}
 
 	ts_reload() {
@@ -466,32 +170,32 @@ EOF
 
 		# workaround for missing backhaul wifi.ap.* ubus obj's:
 		# iterate in config and setup bh
-		config_load wireless
+#		config_load wireless
 
-		_setup_bh_iface() {
-			local sec=$1
-			local iface=$2
-			local bridge=$3
+# _setup_bh_iface() {
+#			local sec=$1
+#			local iface=$2
+#			local bridge=$3
 
-			config_get ifname $sec ifname
+#			config_get ifname $sec ifname
 
-			config_get mode $sec mode
-			config_get multi_ap $sec multi_ap "0"
-			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
-				ts_create bh $ifname 1 2 br-map
-			}
-		}
+#			config_get mode $sec mode
+#			config_get multi_ap $sec multi_ap "0"
+#			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
+#				ts_create bh $ifname 1 2 br-map
+#			}
+		#}
 
-		config_foreach _setup_bh_iface wifi-iface
+#		config_foreach _setup_bh_iface wifi-iface
 
 		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
+		ubus call uci commit '{"config":"network"}'
+		/etc/init.d/firewall reload
 
-		# another workaround for netif? removed
-		# sink devices for br-map bridge
-		for sink in $(ubus list network.interface.sink*) ; do
-			local sink_vlan=${sink/network.interface./}_vlan
-			brctl addif br-map $sink_vlan &> /dev/null
-		done
+
+		#for sink in $(ubus list network.interface.sink*) ; do
+		#	local sink_vlan=${sink/network.interface./}_vlan
+		#done
 	}
 
 	local func=$1
@@ -499,11 +203,6 @@ EOF
 
 	case "$func" in
 		create) dbg "create $@"; ts_create $@;;
-		delete) dbg "delete $@"; ts_delete $@;;
-		populate) dbg "populate $@"; ts_populate $@;;
-		primary) dbg "primary $@"; ts_primary $@;;
-		unicast) dbg "unicast $@"; ts_unicast $@;;
-		multicast) dbg "multicast $@"; ts_multicast $@;;
 		reload) dbg "reload $@"; ts_reload $@;;
 		--help|help) ts_usage;;
 		*) ts_usage; exit 1;;

map-controller/Makefile

@@ -1,16 +1,13 @@
 #
-# Copyright (C) 2020 IOPSYS Software Solutions AB
+# Copyright (C) 2020-22 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=6.0.5
+PKG_VERSION:=2.10.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=3562b7f774e6dffda2e58ad2acb382fc439273fb
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
+PKG_SOURCE_VERSION:=4f638fc1663a75385ad3d8ac4efcf5b940ac52ae
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -20,6 +17,9 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-controller
@@ -38,6 +38,7 @@ define Package/map-controller/config
 endef
 
 TARGET_CFLAGS += \
+	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE

map-controller/files/etc/config/mapcontroller

@@ -1,67 +1,143 @@
 config controller 'controller'
 	option enabled '1'
-	option registrar '5 2'	    #bands on which wps registrar supported
-	option debug '6'
+	option registrar '2 5'
+	option debug '0'
 	option enable_sta_steer '0'
 	option enable_bsta_steer '0'
-	option primary_vid '1'
+	option use_bcn_metrics '0'
+	option use_usta_metrics '0'
+	option primary_vid '0'
 	option primary_pcp '0'
-
-config interface 'lan'
-	option 'dhcp'
-
-config ap
-	option band '5'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-	option ssid 'map-net5'
-	option vid '1'
-	option type 'fronthaul'
-	option network 'lan'
+	option allow_bgdfs '0'
+	option channel_plan '0'
 
 config ap
 	option band '2'
 	option encryption 'sae-mixed'
-	option key '1234567890'
-	option ssid 'map-net2'
 	option vid '1'
-	option type 'fronthaul'
-	option network 'lan'
+	option ssid 'IOWRT-2.4GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
 
 config ap
 	option band '5'
-	option encryption 'sae'
-	option key '5555555555'
-	option ssid 'map-bkhaul-5'
-	option type 'backhaul'
-	option disallow_bsta '1'		# bitmap, 1 for disallow p1, 2 to disallow p2, 3 to disallow both (probably never applicable)
+	option type 'fronthaul'
 	option vid '1'
-	option network 'lan'
+	option ssid 'IOWRT-5GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
 
 config ap
 	option band '2'
-	option encryption 'sae'
-	option key '2222222222'
-	option ssid 'map-bkhaul-2'
-	list disallow_bsta '0'                # 0 or 1 profile-1 bSTA
-	option vid '1'
 	option type 'backhaul'
-	option network 'lan'
+	option vid '1'
+	list disallow_bsta '0'
+	option ssid 'MAP-BH-2.4GHz'
+	option encryption 'sae'
+	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
 
-config policy 'policy'
-	list steer_exclude '00:11:22:33:44:55'
-	list steer_exclude_btm '00:aa:bb:cc:dd:ee'
-	option steer_policy '2'                    # 0, 1, 2 - see MultiAP spec
-	option util_threshold '200'                # channel-util as in BSS load
-	option rcpi_threshold '30'                 # 0 - 220 valid range
-	option report_scan '0'                     # 0 or 1 for independent scans
-	option report_sta_assocfails '1'           # 0 or 1 - stas assoc failure
-	option report_sta_assocfails_rate '2'      # reporting rate for STA assoc fails (attempts per minute)
-	option report_metric_periodic '0'          # 0, or 1 - 255 in secs
-	option report_rcpi_threshold '0'           # 0, or 1 - 220
-	option report_util_threshold '0'           # 0, or  channel-util value
-	option rcpi_hysteresis_margin '0'          # 0, or > 0 - hysteresis margin
-	option include_sta_stats '0'               # sta stats in AP metric resp
-	option include_sta_metric '0'              # sta metric in AP metric resp
-	option disallow_bsta_p1 '0'                # 0 or 1 profile-1 bSTA
-	option disallow_bsta_p2 '0'                # 0 or 1 profile-2 bSTA
+config ap
+	option band '5'
+	option type 'backhaul'
+	option vid '1'
+	list disallow_bsta '0'
+	option ssid 'MAP-BH-5GHz'
+	option encryption 'sae'
+	option key '0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWZYZ0'
+
+# node and radio sections (per node) are auto
+# generated per Multi-AP Agent in the network
+#
+#config node 'node_0a1b2c3d4e50'
+#	option agent_id '0a:1b:2c:3d:4e:50'
+# following values use default values after onboarding if not explicitly set
+#	option backhaul_ul_macaddr '00:00:00:00:00:00'
+#	option backhaul_dl_macaddr '00:00:00:00:00:00'
+#	option backhaul_type 'none'
+#	option primary_vid '1'
+#	option primary_pcp '0'
+#	option report_sta_assocfails '0'
+#	option report_sta_assocfails_rate '0'
+#	option report_metric_periodic '0'
+#	option report_scan '0'
+#	option steer_exclude '0'
+#	option steer_exclude_btm '0'
+#	option steer_disallow '0'
+#	option coordinated_cac '0'
+#	option traffic_separation '0'
+#	option sta_steer '0'
+
+#config radio 'radio_0a1b2c3d4e53'
+#	option agent_id '0a:1b:2c:3d:4e:50'
+#	option macaddr '0a:1b:2c:3d:4e:53'
+#	option band '2'
+# following values use default values after onboarding if not explicitly set
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '70'
+#	option report_rcpi_threshold '80'
+#	option report_util_threshold '0'
+#	option report_rcpi_hysteresis_margin '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'
+
+#config radio 'radio_0a1b2c3d4e54'
+#	option agent_id '0a:1b:2c:3d:4e:50'
+#	option macaddr '0a:1b:2c:3d:4e:54'
+#	option band '5'
+# following values use default values after onboarding if not explicitly set
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '86'
+#	option report_rcpi_threshold '96'
+#	option report_util_threshold '0'
+#	option report_rcpi_hysteresis_margin '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'
+
+#config node 'node_3fb1c2d3e460'
+#	option agent_id '3f:b1:c2:d3:e4:60'
+# following values use default values after onboarding if not explicitly set
+#	option backhaul_ul_macaddr '00:00:00:00:00:00'
+#	option backhaul_dl_macaddr '00:00:00:00:00:00'
+#	option backhaul_type 'none'
+#	option primary_vid '1'
+#	option primary_pcp '0'
+#	option report_sta_assocfails '0'
+#	option report_sta_assocfails_rate '0'
+#	option report_metric_periodic '0'
+#	option report_scan '0'
+#	option steer_exclude '0'
+#	option steer_exclude_btm '0'
+#	option steer_disallow '0'
+#	option coordinated_cac '0'
+#	option traffic_separation '0'
+#	option sta_steer '0'
+
+#config radio 'radio_3fb1c2d3e463'
+#	option agent_id '3f:b1:c2:d3:e4:60'
+#	option macaddr '3f:b1:c2:d3:e4:63'
+#	option band '2'
+# following values use default values after onboarding if not explicitly set
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '70'
+#	option report_rcpi_threshold '80'
+#	option report_util_threshold '0'
+#	option report_rcpi_hysteresis_margin '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'
+
+#config radio 'radio_3fb1c2d3e464'
+#	option agent_id '3f:b1:c2:d3:e4:60'
+#	option macaddr '3f:b1:c2:d3:e4:64'
+#	option band '5'
+# following values use default values after onboarding if not explicitly set
+#	option steer_policy '0'
+#	option util_threshold '0'
+#	option rcpi_threshold '86'
+#	option report_rcpi_threshold '96'
+#	option report_util_threshold '0'
+#	option report_rcpi_hysteresis_margin '0'
+#	option include_sta_stats '1'
+#	option include_sta_metric '1'

map-controller/files/etc/init.d/mapcontroller

@@ -23,7 +23,9 @@ validate_controller_section() {
 		'enable_sta_steer:bool:false' \
 		'enable_bsta_steer:bool:false' \
 		'use_bcn_metrics:bool:false' \
-		'use_usta_metrics:bool:false'
+		'use_usta_metrics:bool:false' \
+		'allow_bgdfs:range(0,2629744)' \
+		'channel_plan:range(0,2629744)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapcontroller" "Validation of controller section failed"
@@ -37,7 +39,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5")' \
+			'band:or("2", "5", "6")' \
 			'ssid:string' \
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \

map-topology/Makefile

@@ -1,37 +1,41 @@
 #
-# Copyright (C) 2020 iopsys
+# Copyright (C) 2020-22 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=3.2.5
+PKG_VERSION:=2.5.0.6
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=ddf78cca217ebfa83733a532bdd2d17b6c3af54e
+PKG_SOURCE_VERSION:=8097afd9091e2da048a935b91d7c3f1069a0e1bf
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
-
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_BUILD_DEPENDS:=ieee1905
+
+PKG_LICENSE:=BSD-3-Clause
 PKG_LICENSE_FILES:=LICENSE
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-topology
 	CATEGORY:=Utilities
 	DEPENDS:=+libubox +ubus +libpthread +libuci +libeasy \
-		+libieee1905 +map-plugin +libavahi-nodbus-support
+		 +libavahi-nodbus-support +libnetfilter-conntrack +libnfnetlink +libmnl
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
 TARGET_CFLAGS += \
+	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
 	-D_GNU_SOURCE
 
 define Package/map-topology/description

mqtt-ciotc/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=Apache-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

netmode/files/etc/init.d/netmode

@@ -34,12 +34,13 @@ start_service() {
 	[ -n "$mode" ] || return
 
 	# Get the last saved mode
-	lastmode="$(cat /etc/netmodes/.last_mode 2>/dev/null)"
+	lastmode="$(cat $MODEDIR/.last_mode 2>/dev/null)"
 	# Return if desired mode is same as last saved mode
 	[ "$mode" == "$lastmode" ] && return
 
 	# Save mode as last mode
-	echo "$mode" > /etc/netmodes/.last_mode
+	[ -d $MODEDIR ] || mkdir -p $MODEDIR
+	echo "$mode" > $MODEDIR/.last_mode
 
 	logger -s -p user.info -t "netmode" "Switching to $mode Mode" >/dev/console
 

obuspa/Config.in

@@ -2,16 +2,28 @@ if PACKAGE_obuspa
 
 menu "Configuration"
 
-config OBUSPA_MTP_ENABLE_STOMP
-	bool "Enable STOMP as mtp protocol"
-	default y
+config OBUSPA_DB_PATH
+	string "Configure path for usp.db file"
+	default "/tmp/"
 
 config OBUSPA_MTP_ENABLE_MQTT
 	bool "Enable MQTT as mtp protocol"
 	default y
 
+config OBUSPA_MTP_ENABLE_WEBSOCKETS
+	bool "Enable WebSockets as mtp protocol"
+	default y
+
+config OBUSPA_MTP_ENABLE_STOMP
+	bool "Enable STOMP as mtp protocol"
+	default y
+
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
-	default y
+	default n
+
+config OBUSPA_CONTROLLER_MTP_VERIFY
+	bool "Enable verification of MQTT response topic before processing the message"
+	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=4.1.0.18
+PKG_VERSION:=5.0.0.16
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=af3d4663d66942e3b0e3253375c5620629769aa5
+PKG_SOURCE_VERSION:=cd47bcaf1cc82dfd5c10ea76491fd0dae4436cc6
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
@@ -31,7 +31,7 @@ define Package/obuspa
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=USP agent
-  DEPENDS:=+libopenssl +libcurl +libsqlite3 +libubox +libubus +uspd +libmosquitto
+  DEPENDS:=+libopenssl +libuci +libblobmsg-json +libcurl +libsqlite3 +libubox +libubus +libmosquitto-ssl +libwebsockets-openssl
 endef
 
 define Package/obuspa/description
@@ -43,8 +43,18 @@ define Package/obuspa/config
 endef
 
 TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall \
+	-Werror
+
+ifneq ($(CONFIG_OBUSPA_CONTROLLER_MTP_VERIFY),)
+  TARGET_CFLAGS += -DOBUSPA_CONTROLLER_MTP_VERIFY
+endif
+
+ifneq ($(CONFIG_OBUSPA_DB_PATH),)
+  CONFIGURE_ARGS += \
+	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
+endif
 
 ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_STOMP),y)
   CONFIGURE_ARGS += \
@@ -70,6 +80,14 @@ else
 	--disable-coap
 endif
 
+ifeq ($(CONFIG_OBUSPA_MTP_ENABLE_WEBSOCKETS),y)
+  CONFIGURE_ARGS += \
+	--enable-websockets
+else
+  CONFIGURE_ARGS += \
+	--disable-websockets
+endif
+
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/
@@ -81,11 +99,14 @@ define Package/obuspa/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/obuspa
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
 	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
 	$(INSTALL_DATA) ./files/etc/obuspa/roles.json $(1)/etc/obuspa/roles.json
 	$(INSTALL_DATA) ./files/etc/obuspa/dmcaching_exclude.json $(1)/etc/obuspa/dmcaching_exclude.json
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/USPAgent.json $(1)/etc/bbfdm/json/USPAgent.json
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/TransferComplete.json $(1)/etc/bbfdm/json/TransferComplete.json
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/init.d/obuspa

@@ -16,7 +16,6 @@ mqtt_num=0
 subs_num=0
 challenge_num=0
 index=0
-role_def_file=""
 PROFILE="/root/.profile"
 
 . /lib/functions/network.sh
@@ -31,11 +30,11 @@ cleanup() {
 trap cleanup EXIT
 
 log() {
-	echo "${@}"|logger -t obuspa.init -p debug
+	echo "$*"|logger -t obuspa.init -p debug
 }
 
 db_set() {
-	if [ -n "${1}" ]; then
+	if [ -n "${1}" ] && [ -n "${2}" ]; then
 		echo "${1} \"${2}\"">>${PARAM_FILE}
 	else
 		echo >>${PARAM_FILE}
@@ -49,9 +48,8 @@ update_keep() {
 		return;
 	fi
 
-	grep -q "${keep_file}" ${KEEP_FILES}
-	if [ "$?" -ne 0 ]; then
-		echo ${keep_file} >> ${KEEP_FILES}
+	if grep -q "${keep_file}" ${KEEP_FILES}; then
+		echo "${keep_file}" >> ${KEEP_FILES}
 	fi
 }
 
@@ -63,12 +61,15 @@ get_index() {
 }
 
 get_role_index_from_json() {
-	local role="${@}"
+	local role="$1"
+	local role_def_file="$2"
 	local num=0
+	local roles_obj
 
 	# In case of role is empty or file not present
-	if [ -z "${role}" -o ! -f "${role_def_file}" ]; then
-		return 0
+	if [ -z "${role}" ] || [ ! -f "${role_def_file}" ]; then
+		echo "${num}"
+		return ${num}
 	fi
 
 	json_init
@@ -79,20 +80,21 @@ get_role_index_from_json() {
 
 	for k in ${roles_obj}; do
 		local rname
-		json_select $k
+		json_select "$k"
 		json_get_var rname name
 		json_select ..
 
-		if [ "${rname}" != "Untrusted" -a "${rname}" != "full_access" ]; then
+		if [ "${rname}" != "Untrusted" ] && [ "${rname}" != "full_access" ]; then
 			num=$(( num + 1 ))
 		fi
 
 		if [ "${role}" = "${rname}" ]; then
+			echo "${num}"
 			return ${num}
 		fi
 	done
 
-	return 0
+	return ${num}
 }
 
 get_uci_ref_index() {
@@ -102,10 +104,10 @@ get_uci_ref_index() {
 
 	index=0
 	config_load $CONFIGURATION
-	config_foreach get_index $1 $2
+	config_foreach get_index "$1" "$2"
 	val=$(cat ${USP_TEMP_FILE})
 
-	if [ -z $val ]; then
+	if [ -z "${val}" ]; then
 		val=0
 	fi
 
@@ -121,7 +123,7 @@ validate_obuspa_section()
 		'trust_cert:file' \
 		'client_cert:file' \
 		'interface:string' \
-		'ifname:string:br-lan' \
+		'ifname:string' \
 		'debug:bool:false' \
 		'prototrace:bool:false' \
 		'log_level:uinteger' \
@@ -149,7 +151,7 @@ validate_controller_section()
 		'USPNotifRetryMinimumWaitInterval:uinteger:5' \
 		'USPNotifRetryIntervalMultiplier:uinteger:2000' \
 		'ControllerCode:string' \
-		'Protocol:or("STOMP","CoAP","MQTT")' \
+		'Protocol:or("STOMP","CoAP","MQTT", "WebSocket")' \
 		'Reference:string' \
 		'Destination:string:controller-notify-dest' \
 		'Topic:string' \
@@ -158,7 +160,14 @@ validate_controller_section()
 		'coap_path:string' \
 		'coap_port:port' \
 		'mqtt:string' \
-		'stomp:string'
+		'stomp:string' \
+		'Host:host' \
+		'Port:port' \
+		'Path:string' \
+		'EnableEncryption:bool' \
+		'KeepAliveInterval:uinteger' \
+		'SessionRetryIntervalMultiplier:uinteger' \
+		'SessionRetryMinimumWaitInterval:uinteger'
 }
 
 validate_subscription_section()
@@ -177,7 +186,7 @@ validate_mtp_section()
 {
 	uci_validate_section ${CONFIGURATION} mtp "${1}" \
 		'Enable:bool:true' \
-		'Protocol:or("STOMP","CoAP","MQTT")' \
+		'Protocol:or("STOMP","CoAP","MQTT", "WebSocket")' \
 		'Reference:string' \
 		'ResponseTopicConfigured:string' \
 		'PublishQoS:uinteger' \
@@ -185,7 +194,12 @@ validate_mtp_section()
 		'coap_path:string' \
 		'coap_port:port' \
 		'mqtt:string' \
-		'stomp:string'
+		'stomp:string' \
+		'Path:string' \
+		'Port:port' \
+		'EnableEncryption:bool' \
+		'KeepAliveInterval:uinteger'
+
 }
 
 validate_stomp_connection_section()
@@ -223,25 +237,37 @@ validate_mqtt_client_section()
 		'ConnectRetryMaxInterval:uinteger:60'
 }
 
-get_oui_from_db() {
-	local oui="$(db get device.deviceinfo.ManufacturerOUI)"
+validate_challenge_section()
+{
+	uci_validate_section ${CONFIGURATION} challenge "${1}" \
+		'Enable:bool:true' \
+		'Alias:string' \
+		'Description:string' \
+		'role_name:string' \
+		'Role:string' \
+		'Value:string' \
+		'Retries:uinteger:3' \
+		'LockoutPeriod:uinteger:0'
+}
 
-	echo "${oui}"
+get_oui_from_db() {
+	db -q get device.deviceinfo.ManufacturerOUI
 }
 
 get_serial_from_db() {
-	local serial="$(db get device.deviceinfo.SerialNumber)"
-
-	# this can encoded further
-	echo "${serial}"
+	db -q get device.deviceinfo.SerialNumber
 }
 
 publish_endpoint() {
 	local AgentEndpointID serial oui user pass
-	local opt=""
+
+	if ! uci -q get obuspa.localmqtt; then
+		log "Remote mqtt broker configured, skip publishing endpoint"
+		return 0;
+	fi
 
 	# return if mosquitto_pub is not present
-	if [ ! "$(which mosquitto_pub)" ]; then
+	if [ ! "$(command -v mosquitto_pub)" ]; then
 		log "mosquitto_pub not present can't publish EndpointID"
 		return 0;
 	fi
@@ -256,22 +282,24 @@ publish_endpoint() {
 	fi
 
 	config_get user localmqtt Username
-	if [ -n "${user}" ]; then
-		opt="-u ${user}"
-	fi
 	config_get pass localmqtt Password
-	if [ -n "${pass}" ]; then
-		opt="${opt} -P ${pass}"
-	fi
 
 	# publish Agent's EndpointID in mosquito broker for discovery by usp-js
 	# This is a work around till obuspa adds supports for mDNS discovery
-	log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
-	mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" ${opt}
+	if [ -n "${user}" ] && [ -n "${pass}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username, password"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}" -P "${pass}"
+	elif [ -n "${user}" ]; then
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker with username only"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}" -u "${user}"
+	else
+		log "Publishing EndpointID ${AgentEndpointID} to local mqtt broker"
+		mosquitto_pub -r -t "obuspa/EndpointID" -m "${AgentEndpointID}"
+	fi
 }
 
 configure_localagent() {
-	local Enable ParameterName EndpointID
+	local Enable EndpointID
 
 	validate_localagent_section 'localagent' || {
 		log "Validation of localagent section failed"
@@ -288,33 +316,48 @@ configure_localagent() {
 configure_controller() {
 	local EndpointID Enable AssignedRole PeriodicNotifInterval PeriodicNotifTime USPNotifRetryMinimumWaitInterval
 	local USPNotifRetryIntervalMultiplier ControllerCode Protocol Destination coap_host coap_path coap_port
-	local Reference Topic mqtt stomp assigned_role_name
+	local Reference Topic mqtt stomp assigned_role_name ParameterName
+	local Host Port Path EnableEncryption KeepAliveInterval
+	local SessionRetryIntervalMultiplier SessionRetryMinimumWaitInterval
 
 	validate_controller_section "${1}" || {
 		log "Validation of controller section failed"
 		return 1;
 	}
 
-	if [ -z "${EndpointID}" -o -z "${Protocol}" ]; then
+	if [ -z "${EndpointID}" ] || [ -z "${Protocol}" ]; then
 		log "controller:: EndpointID id and Protocol cannot be empty"
 		return 1;
 	fi
 
-	if [ -z "${stomp}" -a -z "${Reference}"  -a -z "${mqtt}" -a -z "${coap_path}" ]; then
+	# Support for backward compatibility for coap uci parameters
+	if [ -n "${coap_host}" ] && [ -z "${Host}" ]; then
+		Host="${coap_host}"
+	fi
+
+	if [ -n "${coap_path}" ] && [ -z "${Path}" ]; then
+		Path="${coap_path}"
+	fi
+
+	if [ -n "${coap_port}" ] && [ -z "${Port}" ]; then
+		Port="${coap_port}"
+	fi
+
+	if [ -z "${stomp}" ] && [ -z "${Reference}" ] && [ -z "${mqtt}" ] && [ -z "${Host}" ]; then
 		log "controller:: Invalid configuration"
 		return 1;
 	fi
 
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp ${stomp})
+			val=$(get_uci_ref_index stomp "${stomp}")
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred stomp section"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt ${mqtt})
+			val=$(get_uci_ref_index mqtt "${mqtt}")
 			if [ "${val}" -eq 0 ]; then
 				log "Not able to find the referred mqtt section"
 				return 1;
@@ -332,7 +375,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 	else
 		if [ -n "${assigned_role_name}" ]; then
-			AssignedRole=$(get_role_index ${assigned_role_name})
+			AssignedRole=$(get_role_index "${assigned_role_name}")
 			db_set Device.LocalAgent.Controller.${controller_num}.AssignedRole "${AssignedRole}"
 		fi
 	fi
@@ -358,9 +401,18 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.STOMP.Reference "${Reference}"
 		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.STOMP.Destination "${Destination}"
 	elif [ "${Protocol}" = "CoAP" ]; then
-		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Host "${coap_host}"
-		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Path "${coap_path}"
-		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Port "${coap_port}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Host "${Host}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Path "${Path}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.Port "${Port}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.CoAP.EnableEncryption "${EnableEncryption}"
+	elif [ "${Protocol}" = "WebSocket" ]; then
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.Host "${Host}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.Port "${Port}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.Path "${Path}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.EnableEncryption "${EnableEncryption}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.KeepAliveInterval "${KeepAliveInterval}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.SessionRetryIntervalMultiplier "${SessionRetryIntervalMultiplier}"
+		db_set Device.LocalAgent.Controller.${controller_num}.MTP.1.WebSocket.SessionRetryMinimumWaitInterval "${SessionRetryMinimumWaitInterval}"
 	else
 		log "Unsupported Protocol ${Protocol}"
 	fi
@@ -373,7 +425,7 @@ configure_controller() {
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Alias "cpe-${_pnum}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.Enable "${Enable}"
 		db_set Device.LocalAgent.Controller.${controller_num}.BootParameter.${_pnum}.ParameterName "${param}"
-		_pnum=$(( ${_pnum} + 1 ))
+		_pnum=$(( _pnum + 1 ))
 	done
 
 	db_set
@@ -388,12 +440,13 @@ configure_subscription(){
 		return 1;
 	}
 
-	if [ -z "${Recipient}" -a -z "${controller}" ]; then
+	if [ -z "${Recipient}" ] && [ -z "${controller}" ]; then
 		log "No recipient for subscription"
+		return 1;
 	fi
 
 	if [ -z "${Recipient}" ]; then
-		val=$(get_uci_ref_index controller ${controller})
+		val=$(get_uci_ref_index controller "${controller}")
 		if [ "${val}" -eq 0 ]; then
 			log "Not able to find the referred controller section"
 				return 1;
@@ -410,28 +463,17 @@ configure_subscription(){
 	db_set Device.LocalAgent.Subscription.${subs_num}.ReferenceList "${ReferenceList}"
 	db_set Device.LocalAgent.Subscription.${subs_num}.Persistent "${Persistent}"
 	db_set Device.LocalAgent.Subscription.${subs_num}.Recipient "${Recipient}"
-}
-
-validate_challenge_section()
-{
-	uci_validate_section ${CONFIGURATION} challenge "${1}" \
-		'Enable:bool:true' \
-		'Alias:string' \
-		'Description:string' \
-		'role_name:string' \
-		'Role:string' \
-		'Value:string' \
-		'Retries:uinteger:3' \
-		'LockoutPeriod:uinteger:0'
+	db_set Device.LocalAgent.Subscription.${subs_num}.CreationDate "$(date -I'seconds')"
 }
 
 check_json_load()
 {
-	local ret=0
+	local ret
+
+	ret=0
 	if [ -f "${role_def_file}" ]; then
 		json_init
-		json_load_file "${role_def_file}" 2>&1 |grep -q Failed
-		if [ $? -eq 0 ]; then # In case of invalid json file
+		if json_load_file "${role_def_file}" 2>&1 |grep -q Failed; then
 			log "failed to load [${role_def_file}]"
 			ret=1
 		fi
@@ -443,8 +485,10 @@ check_json_load()
 get_role_index() {
 	local role="Device.LocalAgent.ControllerTrust.Role"
 	local idx=0
-	local role_name="${@}"
+	local role_name="$1"
+	local role_def_file
 
+	role_def_file=$(uci -q get obuspa.global.role_file 2>/dev/null)
 	case "${role_name}" in
 	'full_access')
 		idx=1;
@@ -456,9 +500,8 @@ get_role_index() {
 		local ji=0
 
 		check_json_load
-		if [ $? -eq 0 ]; then
-			get_role_index_from_json ${role_name}
-			ji=$?
+		if [ "$?" -eq "0" ]; then
+			ji=$(get_role_index_from_json "${role_name}" "${role_def_file}")
 		fi
 		idx=$(( ji + 2 )) # Add predefined roles
 	 esac
@@ -474,7 +517,7 @@ configure_challenges() {
 		exit 1;
 	}
 
-	if [ -z "${role_name}" -a -z "${Role}" ]; then
+	if [ -z "${role_name}" ] && [ -z "${Role}" ]; then
 		log "Either role_name or Role must defined for a challenge";
 		return 1;
 	fi
@@ -487,10 +530,10 @@ configure_challenges() {
 	fi
 
 	if [ -z "${Role}" ]; then
-		Role=$(get_role_index ${role_name})
+		Role=$(get_role_index "${role_name}")
 	fi
 
-	if [ -z "${Alias}" -a -n "${role_name}" ]; then
+	if [ -z "${Alias}" ] && [ -n "${role_name}" ]; then
 		Alias=${role_name}
 	fi
 
@@ -504,22 +547,31 @@ configure_challenges() {
 configure_mtp() {
 	local Enable Protocol Reference ResponseTopicConfigured PublishQoS
 	local stomp mqtt
+	local Path Port EnableEncryption KeepAliveInterval
 
 	validate_mtp_section "${1}" || {
 		log "Validation of mtp section failed"
 		return 1;
 	}
 
+	if [ -n "${coap_path}" ] && [ -z "${Path}" ]; then
+		Path="${coap_path}"
+	fi
+
+	if [ -n "${coap_port}" ] && [ -z "${Port}" ]; then
+		Port="${coap_port}"
+	fi
+
 	if [ -z "${Reference}" ]; then
 		if [ "${Protocol}" = "STOMP" ]; then
-			val=$(get_uci_ref_index stomp ${stomp})
+			val=$(get_uci_ref_index stomp "${stomp}")
 			if [ "${val}" -eq 0 ]; then
 				log "Referred stomp section not found"
 				return 1;
 			fi
 			Reference="Device.STOMP.Connection.${val}"
 		elif [ "${Protocol}" = "MQTT" ]; then
-			val=$(get_uci_ref_index mqtt ${mqtt})
+			val=$(get_uci_ref_index mqtt "${mqtt}")
 			if [ "${val}" -eq 0 ]; then
 				log "Referred mqtt section not found"
 				return 1;
@@ -542,8 +594,13 @@ configure_mtp() {
 		db_set Device.LocalAgent.MTP.${mtp_num}.STOMP.Reference "${Reference}"
 		db_set Device.LocalAgent.MTP.${mtp_num}.STOMP.Destination "${Destination}"
 	elif [ "${Protocol}" = "CoAP" ]; then
-		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Path "${coap_path}"
-		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Port "${coap_port}"
+		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Path "${Path}"
+		db_set Device.LocalAgent.MTP.${mtp_num}.CoAP.Port "${Port}"
+	elif [ "${Protocol}" = "WebSocket" ]; then
+		db_set Device.LocalAgent.MTP.${mtp_num}.WebSocket.Path "${Path}"
+		db_set Device.LocalAgent.MTP.${mtp_num}.WebSocket.Port "${Port}"
+		db_set Device.LocalAgent.MTP.${mtp_num}.WebSocket.EnableEncryption "${EnableEncryption}"
+		db_set Device.LocalAgent.MTP.${mtp_num}.WebSocket.KeepAliveInterval "${KeepAliveInterval}"
 	else
 		log "Unsupported Protocol ${Protocol} in mtp"
 	fi
@@ -583,7 +640,7 @@ configure_stomp_connection() {
 
 configure_mqtt_client(){
 	local BrokerAddress BrokerPort Enable Username Password ProtocolVersion KeepAliveTime
-	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier
+	local TransportProtocol ConnectRetryTime ConnectRetryMaxInterval ConnectRetryIntervalMultiplier ClientID
 
 	validate_mqtt_client_section "${1}" || {
 		log "Validation of mqtt section failed"
@@ -617,13 +674,9 @@ configure_mqtt_client(){
 
 configure_obuspa() {
 	local enabled trust_cert ifname interface debug prototrace log_level db_file log_dest role_file
+	local client_cert
 
-	validate_obuspa_section "global" || {
-		log "Validation of global section failed"
-		return 1;
-	}
-
-	role_def_file="${role_file}"
+	validate_obuspa_section "global"
 
 	if [ "${debug}" -eq 1 ]; then
 		# Forward stdout of the command to logd
@@ -632,72 +685,94 @@ configure_obuspa() {
 		procd_set_param stderr 1
 	fi
 
-	if [ "${debug}" -eq 1 -a "${prototrace}" -eq 1 ]; then
+	if [ "${debug}" -eq 1 ] && [ "${prototrace}" -eq 1 ]; then
 		procd_append_param command -p
 	fi
 
-	if [ "${debug}" -eq 1 -a -n "${log_level}" ]; then
-		procd_append_param command -v ${log_level}
+	if [ "${debug}" -eq 1 ] && [ -n "${log_level}" ]; then
+		procd_append_param command -v "${log_level}"
 	fi
 
 	if [ -n "${log_dest}" ]; then
-		procd_append_param command -l ${log_dest}
+		procd_append_param command -l "${log_dest}"
 	fi
 
 	if [ -n "${interface}" ]; then
-		network_get_physdev ifname ${interface}
+		network_get_physdev ifname "${interface}"
 	fi
 
-	# Set this variable for root user and obuspa -c tool
-	if [ -f "${PROFILE}" ]; then
-		grep -q "export USP_BOARD_IFNAME=${ifname}" ${PROFILE}
-		if [ "$?" -ne 0 ]; then
-			grep -q "export USP_BOARD_IFNAME" ${PROFILE}
-			if [ "$?" -eq 0 ]; then
-				sed -i "g/export USP_BOARD_IFNAME/d" ${PROFILE}
-			fi
-			echo "export USP_BOARD_IFNAME=${ifname}" >> ${PROFILE}
+	if [ -n "${ifname}" ]; then
+		procd_set_param env USP_BOARD_IFNAME="${ifname}"
+	fi
+
+	if [ -z "${ifname}" ] || ! grep -F -q "export USP_BOARD_IFNAME=${ifname}" "${PROFILE}"; then
+		if [ -f "${PROFILE}" ]; then
+			sed -i "/export USP_BOARD_IFNAME/d" "${PROFILE}"
+		fi
+
+		if [ -n "${ifname}" ]; then
+			# Set this variable for root user and obuspa -c tool
+			echo "export USP_BOARD_IFNAME=${ifname}" >> "${PROFILE}"
 		fi
-	else
-		echo "export USP_BOARD_IFNAME=${ifname}" > ${PROFILE}
 	fi
 
 	if [ -n "${db_file}" ]; then
 		update_keep "${db_file}"
-		procd_append_param command -f ${db_file}
+		procd_append_param command -f "${db_file}"
 	fi
 
 	if [ -n "${trust_cert}" ]; then
 		update_keep "${trust_cert}"
 		if [ -f "${trust_cert}" ]; then
-			procd_append_param command -t ${trust_cert}
+			procd_append_param command -t "${trust_cert}"
 		fi
 	fi
 
 	if [ -n "${client_cert}" ]; then
 		update_keep "${client_cert}"
 		if [ -f "${client_cert}" ]; then
-			procd_append_param command -a ${client_cert}
+			procd_append_param command -a "${client_cert}"
 		fi
 	fi
-
-	procd_set_param env USP_BOARD_IFNAME=${ifname}
 }
 
 # Create factory reset file
 db_init() {
 	# Load configuration
 	config_load $CONFIGURATION
-	config_foreach configure_obuspa obuspa
+
 	config_foreach configure_controller controller
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_localagent localagent
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mtp mtp
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_stomp_connection stomp
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_mqtt_client mqtt
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_subscription subscription
+	[ "$?" -ne 0 ] && return 1;
 	config_foreach configure_challenges challenge
+	[ "$?" -ne 0 ] && return 1;
 
 	db_set Internal.Reboot.Cause "LocalFactoryReset"
+	return 0;
+}
+
+register_service()
+{
+	procd_open_instance ${CONFIGURATION}
+	procd_set_param command ${PROG}
+	procd_append_param command -r ${PARAM_FILE}
+
+	configure_obuspa
+	procd_set_param respawn \
+			"${respawn_threshold:-5}" \
+			"${respawn_timeout:-10}" "${respawn_retry:-3}"
+
+	procd_set_param watch usp.raw
+	procd_close_instance
 }
 
 service_running() {
@@ -707,24 +782,19 @@ service_running() {
 start_service() {
 	local enabled
 
+	mkdir -p /tmp/obuspa/
 	config_load obuspa
-	config_get enabled global enabled
+	config_get_bool enabled global enabled 0
 
 	if [ "${enabled}" -eq 0 ]; then
 		log "OBUSPA not enabled"
 		return 0;
 	fi
 
-	procd_open_instance ${CONFIGURATION}
-	procd_set_param command ${PROG}
 	db_init
-	procd_append_param command -r ${PARAM_FILE}
-	procd_set_param respawn \
-			${respawn_threshold:-5} \
-			${respawn_timeout:-10} ${respawn_retry:-3}
+	[ "$?" -ne 0 ] && return 1;
 
-	procd_set_param watch usp.raw
-	procd_close_instance
+	register_service
 }
 
 stop_service() {
@@ -733,10 +803,10 @@ stop_service() {
 	config_load obuspa
 	config_get db_file global db_file
 
-	${PROG} -c stop 2>&1 >/dev/null
+	${PROG} -c stop >/dev/null 2>&1
 
 	if [ -z "${db_file}" ]; then
-		db_file="/tmp/usp.db"
+		db_file="/tmp/obuspa/usp.db"
 	fi
 
 	[ -f "${db_file}" ] && rm -f ${db_file}
@@ -771,4 +841,14 @@ service_triggers() {
 			json_add_int "" "2000"
 		json_close_array
 	procd_close_trigger
+
+	procd_open_validate
+	validate_obuspa_section
+	validate_localagent_section
+	validate_controller_section
+	validate_subscription_section
+	validate_mtp_section
+	validate_stomp_connection_section
+	validate_mqtt_client_section
+	procd_close_validate
 }

obuspa/files/etc/obuspa/dmcaching_exclude.json

@@ -1,6 +1,7 @@
 {
   "dmcaching_exclude": [
     "Device.DeviceInfo.ProcessStatus.Process.",
-    "Device.Hosts.Host."
+    "Device.Hosts.Host.",
+    "Device.WiFi.DataElements."
   ]
 }

owsd/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=owsd
-PKG_VERSION:=1.1.3
+PKG_VERSION:=1.1.4
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f78f7198944758cd2140887ecd8970432f678fc1
+PKG_SOURCE_VERSION:=e37c6f9d708c454c802eede814cc51fb89c919e9
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

paho-mqtt-c/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2020 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=edl-v10
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

periodicstats/Makefile

@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=periodicstats
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.2.0
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7426c7458f792cc66920c206d62869c5620f1400
+PKG_SOURCE_VERSION:=6c68428405bc88a9990e855f911aecc86f07f4a8
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/periodicstats.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -20,13 +20,15 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/periodicstats
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Periodic Statistics Daemon
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbf_api
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/periodicstats/description
@@ -35,7 +37,7 @@ endef
 
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
-        $(CP) -rf ./periodicstats/* $(PKG_BUILD_DIR)/
+        $(CP) -rf ~/git/periodicstats/* $(PKG_BUILD_DIR)/
 endef
 endif
 

periodicstats/files/etc/init.d/periodicstats

@@ -11,9 +11,12 @@ service_running() {
 }
 
 start_service() {
-	enable=$(uci -q get periodicstats.globals.enable)
+	local enable
 
-	if [ "$(enable)" != "1" ]; then
+	config_load periodicstats
+	config_get_bool enable globals enable 1
+
+	if [ "${enable}" -ne "1" ]; then
 		return 0;
 	fi
 
@@ -24,7 +27,7 @@ start_service() {
 }
 
 service_triggers() {
-	procd_add_reload_trigger periodicstats uspd
+	procd_add_reload_trigger periodicstats
 }
 
 reload_service() {

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.6
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=15ba90f01914113e7c5e8f8a6df6279c882e8265
+PKG_SOURCE_VERSION:=21522c2003b8c61904acc61ff97e54fc9b0c3c92
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

peripheral_manager/files/etc/init.d/ledmngr

@@ -0,0 +1,62 @@
+#!/bin/sh /etc/rc.common
+
+START=20
+USE_PROCD=1
+
+setled() {
+	local enable
+	local brightness
+
+	config_get_bool enable $1 enable 1
+	config_get brightness $1 brightness 100
+	ubus call led.$1 set "{\"enable\":$enable,\"brightness\":$brightness}"
+}
+
+start_service() {
+	local enable
+
+	config_load leds
+	config_foreach setled led
+	config_get_bool enable leds enable 1
+
+	if [ "$enable" == "0" ]; then
+		ubus call leds set  '{"state" : "alloff"}'
+	else
+		ubus call leds set  '{"state" : "normal"}'
+	fi
+}
+
+boot() {
+	local led ledname
+
+	ubus list led* >/dev/null || sleep 1
+	ubus list led* >/dev/null || sleep 1
+
+	[ -f /etc/config/leds ] || touch /etc/config/leds
+
+	if ! uci -q get leds.leds >/dev/null; then
+		uci set leds.leds=leds
+		uci set leds.leds.enable=1
+	fi
+
+	for led in $(ubus list led.*); do
+		ledname=${led:4}
+		case $ledname in
+			*phy*) continue ;;
+		esac
+		if ! uci -q  get leds.$ledname >/dev/null; then
+			uci set leds.$ledname=led
+			uci set leds.$ledname.enable=1
+		fi
+	done
+
+	uci commit leds
+
+	start
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "leds"
+}
+

ponmngr/files/etc/init.d/pon

@@ -1,36 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=98
-STOP=10
-
-USE_PROCD=1
-NAME=ponmngr
-PROG="/usr/sbin/omcid start"
-
-include /lib/pon
-
-
-start_service() {
-       if [ -f "/etc/config/pon" ]; then
-		procd_open_instance $NAME
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-                start_gpon
-       fi
-}
-
-boot() {
-        start
-}
-
-stop_service() {
-	service_stop ${PROG}
-        stop_gpon
-}
-
-reload_service() {
-        stop
-        start
-}
-

ponmngr/files/etc/init.d/xpon

@@ -0,0 +1,25 @@
+#!/bin/sh /etc/rc.common
+
+START=19
+STOP=10
+
+USE_PROCD=1
+
+. /lib/functions.sh
+include /lib/xpon
+
+start_service() {
+	if [ "$(uci -q get xpon.ani.enable)" == "1" ]; then
+		init_xpon
+	fi
+}
+
+stop_service() {
+	# stopping omcid does not bring down the pon link, which should happen
+	# if ANI is disabled or stopped (go to O1)
+	deinit_xpon
+}
+
+service_triggers() {
+	procd_add_reload_trigger "xpon"
+}

ponmngr/files/etc/uci-defaults/60-pon-generate

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-basemac="$(db -q get hw.board.basemac | tr -d ':')"
-             
-if [ -s "/etc/config/pon" ]; then
-        if uci -q get pon.globals >/dev/null; then
-                # return if there is any valid content
-                exit                                  
-        else                                          
-                rm -f /etc/config/pon
-        fi                           
-fi                                   
-touch /etc/config/pon
-                     
-mac=''               
-if [ -z "$basemac" ]; then
-        mac="12345678"    
-else                      
-        # read last 8 characters of basemac without :
-        mac=${basemac: -8}                           
-fi                                                   
-                          
-uci set pon.globals=globals
-uci set pon.globals.enabled="1"
-uci set pon.globals.serial_number="BRCM$mac"
-                                           
-uci commit pon  

ponmngr/files/etc/uci-defaults/60-xpon-generate

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+if [ -s "/etc/config/xpon" ]; then
+        if uci -q get xpon.ani >/dev/null; then
+                # return if there is any valid content
+                exit                                  
+        else                                          
+                rm -f /etc/config/xpon
+        fi                           
+fi                                   
+touch /etc/config/xpon
+                     
+                          
+uci set xpon.ani=ani
+uci set xpon.ani.enable="1"
+                                           
+uci commit xpon  

ponmngr/files/lib/pon/broadcom.sh

@@ -1,70 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-
-configure_snpwd() {
-        local serial_no password
-        serial_no="$1"
-        password="$2"
-
-        # serial number comprises of 2 parts, vendor id and vendor specific, the vendor id is
-        # a string while the vendor specific is a hex, so split the 2 and set accordingly
-        local vendor_id vendor_specific
-        vendor_id=${serial_no:0:4}
-        vendor_specific=${serial_no: -8}
-
-        # attempt to conver vendor_id from string to hex
-	vendor_id=$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')
-	vendor_id=${vendor_id:0:8}
-
-        bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vendor_specific}
-        if [ -n "$password" ]; then
-		password=$(echo $password | hexdump -n ${#password} -e '16/1 "%02X""\n"')
-                bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon password=$password
-        fi
-}
-
-configure_gpon() {
-        local enabled serial_no password
-        config_load pon
-        config_get enabled globals "enabled"
-
-	if [ "$enabled" == "0" ]; then
-		exit
-        fi
-
-        config_get serial_no globals "serial_number"
-        config_get password globals "password"
-
-        configure_snpwd $serial_no $password
-}
-
-start_gpon() {
-        if [ -n "$(which gponctl)" ]; then
-                configure_gpon
-                gponctl start
-        fi
-}
-
-stop_gpon() {
-        if [ -n "$(which gponctl)" ]; then
-                gponctl stop
-        fi
-}
-
-get_gpon_status() {
-        json_init
-        status="$(gponctl getstate)"
-        admin_status="$(echo $status | head -n1 | awk '{print $8;}')"
-        json_add_string "admin_status" "$admin_status"
-        op_status="$(echo $status | head -n1 | awk '{print $12;}')"
-        case $op_status in
-        NUMBER)
-                op_status="$(echo $status | head -n1 | awk '{print $13;}')"
-                ;;
-        esac
-
-        op_status=${op_status:1:2}
-        json_add_string "operational_status" "$op_status"
-        json_dump
-}

ponmngr/files/lib/xpon/broadcom.sh

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+USE_PROCD=1
+
+. /lib/functions.sh
+
+init_xpon() {
+	procd_open_instance pon_msgd
+	procd_set_param command bcm_msgd -c gpon
+	procd_close_instance
+	procd_open_instance pon_daemon
+	procd_set_param command omcid start -n
+	procd_close_instance
+
+}
+
+deinit_xpon() {
+	gponctl stop
+}
+

ponmngr/files/usr/libexec/rpcd/pon

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-include /lib/pon
-
-case "$1" in
-	list)
-		echo '{ "status": {} }'
-		;;
-	call)
-		case "$2" in
-			status)
-				get_gpon_status
-				;;
-		esac
-		;;
-esac
-

port-management/files/etc/uci-defaults/15-ports-config-generate

@@ -1,16 +1,20 @@
 #!/bin/sh
 
 populate_config_from_db() {
-	. /lib/network/utils.sh
+	. /lib/functions.sh
+	include /lib/network
 
 	portorder="$(db -q get hw.board.ethernetPortOrder)"
 	for port in $portorder; do
+		speed="$(get_max_port_speed $port 2>/dev/null)"
+		speed="${speed:-1000}"
+
 		uci add ports ethport
 		uci rename ports.@ethport[-1]="$(get_port_name $port)"
 		uci set ports.@ethport[-1].enabled=1
 		uci set ports.@ethport[-1].name="$(get_port_name $port)"
 		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed=1000
+		uci set ports.@ethport[-1].speed="$speed"
 		uci set ports.@ethport[-1].duplex="full"
 		uci set ports.@ethport[-1].autoneg=1
 		uci set ports.@ethport[-1].eee=0

qosmngr/files/etc/uci-defaults/60-qos_queue_generate

@@ -3,7 +3,7 @@
 . /lib/functions.sh
 
 ethwan="$(db -q get hw.board.ethernetWanPort)"
-cpu_model="$(brcm_fw_tool -k info)"
+cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
 
 generate_queue(){
 	section="$1"
@@ -19,7 +19,7 @@ generate_queue(){
 
         if [ $is_lan -eq 1 ]; then
 		case $cpu_model in
-			68*) no_of_q="0 1 2 3" ;;
+			BCM68*) no_of_q="0 1 2 3" ;;
 		esac
 
                 if grep -qE '[0-9]+ archer$' /proc/devices; then 

qosmngr/files/lib/qos/broadcom.sh

@@ -4,8 +4,8 @@
 
 IP_RULE=""
 BR_RULE=""
+BR6_RULE=""
 
-POLICER_SKIP=0
 POLICER_COUNT=0
 INTF_NAME=""
 Q_COUNT=0
@@ -292,6 +292,7 @@ flush_chains() {
 
 init_broute_rule() {
 	BR_RULE=""
+	BR6_RULE=""
 }
 
 broute_filter_on_src_if() {
@@ -327,6 +328,82 @@ broute_filter_on_ether_type() {
 	BR_RULE="$BR_RULE --proto $1"
 }
 
+broute_filter_on_ether_type6() {
+	BR6_RULE="$BR6_RULE --proto IPv6"
+}
+
+ebt_match_src_ip() {
+        BR_RULE="$BR_RULE --ip-src $1"
+}
+
+ebt_match_dst_ip() {
+        BR_RULE="$BR_RULE --ip-dst $1"
+}
+
+ebt_match_ipv6_src_ip() {
+        BR_RULE="$BR_RULE --ip6-src $1"
+}
+
+ebt_match_ipv6_dst_ip() {
+        BR_RULE="$BR_RULE --ip6-dst $1"
+}
+
+ebt_match_ip_src_port() {
+        BR_RULE="$BR_RULE --ip-source-port $1"
+}
+
+ebt_match_ip_dst_port() {
+        BR_RULE="$BR_RULE --ip-destination-port $1"
+}
+
+ebt_match_ipv6_src_port() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed so update BR6_RULE string as well otherwise
+	#update BR_RULE only for installation of ipv6 proto rule only.
+	if [ ! -z "$BR6_RULE" ]; then
+		BR6_RULE="$BR6_RULE --ip6-source-port $1"
+	else
+		BR_RULE="$BR_RULE --ip6-source-port $1"
+	fi
+}
+
+ebt_match_ipv6_dst_port() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed so update BR6_RULE string as well otherwise
+	#update BR_RULE only for installation of ipv6 proto rule only.
+	if [ ! -z "$BR6_RULE" ]; then
+		BR6_RULE="$BR6_RULE --ip6-destination-port $1"
+	else
+		BR_RULE="$BR_RULE --ip6-destination-port $1"
+	fi
+}
+
+ebt_match_ip_protocol() {
+        BR_RULE="$BR_RULE --ip-proto $1"
+}
+
+ebt_match_ipv6_protocol() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed so update BR6_RULE string as well otherwise
+	#update BR_RULE only for installation of ipv6 proto rule only.
+	if [ ! -z "$BR6_RULE" ]; then
+		BR6_RULE="$BR6_RULE --ip6-proto $1"
+	else
+		BR_RULE="$BR_RULE --ip6-proto $1"
+	fi
+}
+
+ebt_match_ipv6_dscp() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed so update BR6_RULE string as well otherwise
+	#update BR_RULE only for installation of ipv6 proto rule only.
+	if [ ! -z "$BR6_RULE" ]; then
+		BR6_RULE="$BR6_RULE --ip6-tclass $1"
+	else
+		BR_RULE="$BR_RULE --ip6-tclass $1"
+	fi
+}
+
 broute_filter_on_dscp() {
 	# The broadcom option --ip-dscp-extend actually accepts tos
 	# and not dscp and that too in hex, hence, perform the conversion
@@ -337,6 +414,11 @@ broute_filter_on_dscp() {
 }
 
 broute_filter_on_vid() {
+
+	if [ $1 -lt 0 ]; then
+		return
+	fi
+
 	case "$BR_RULE" in
 	*proto*)
 		BR_RULE="$BR_RULE --vlan-id $1"
@@ -348,11 +430,145 @@ broute_filter_on_vid() {
 }
 
 broute_rule_set_traffic_class() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed so update BR6_RULE string as well otherwise
+	#update BR_RULE only for installation of ipv6 proto rule only.
 	BR_RULE="$BR_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
+	if [ ! -z "$BR6_RULE" ]; then
+		BR6_RULE="$BR6_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
+	fi
 }
 
 broute_append_rule() {
+	#when ethertype is not configured by user then both proto rules of ipv4
+	#and ipv6 to be installed otherwise install ipv6 proto rule only.
 	echo "ebtables -t broute -A qos $BR_RULE" >> /tmp/qos/classify.ebtables
+	if [ -n "$BR6_RULE" ]; then
+		echo "ebtables -t broute -A qos $BR6_RULE" >> /tmp/qos/classify.ebtables
+	fi
+}
+
+set_ip_addr()
+{
+        local cid=$1
+        local match_src_ip_func=$2
+        local match_dst_ip_func=$3
+
+        config_get src_ip "$cid" "src_ip"
+        config_get dst_ip "$cid" "dest_ip"
+
+        if [ ! -z "$src_ip" ]; then
+                $match_src_ip_func "$src_ip"
+        fi
+
+        if [ ! -z "$dst_ip" ]; then
+                $match_dst_ip_func "$dst_ip"
+        fi
+}
+
+set_ports()
+{
+        local cid=$1
+        local match_src_port_func=$2
+        local match_dst_port_func=$3
+	local src_port=""
+	local dst_port=""
+	local src_port_range=""
+	local dst_port_range=""
+
+        config_get src_port "$cid" "src_port"
+        config_get dst_port "$cid" "dest_port"
+        config_get src_port_range "$cid" "src_port_range"
+        config_get dst_port_range "$cid" "dest_port_range"
+
+        if ! [ -z $src_port ] && ! [ -z $src_port_range ]; then
+                $match_src_port_func "$src_port:$src_port_range"
+        elif [ ! -z $src_port ]; then
+                $match_src_port_func $src_port
+        fi
+
+        if ! [ -z $dst_port ] && ! [ -z $dst_port_range ]; then
+                $match_dst_port_func "$dst_port:$dst_port_range"
+        elif [ ! -z $dst_port ]; then
+                $match_dst_port_func $dst_port
+	fi
+}
+
+protocol_string_to_num()
+{
+        local value=-1
+
+        case "$1" in
+		*[0-9]*)	value="$1"
+                ;;
+                TCP|tcp)        value=6
+                ;;
+                UDP|udp)        value=17
+                ;;
+                ICMP|icmp)      value=1
+                ;;
+                ICMPv6|icmpv6)  value=58
+                ;;
+                IGMP|igmp)      value=2
+                ;;
+                SCTP|sctp)      value=132
+                ;;
+                *) value=-1
+                ;;
+        esac
+        echo $value
+}
+
+broute_ipv4_rule_options()
+{
+	local cid=$1
+	config_get protocol "$cid" "proto"
+	config_get dscp_filter "$cid" "dscp_filter"
+
+	set_ip_addr $cid ebt_match_src_ip ebt_match_dst_ip
+
+	if [ ! -z $dscp_filter ]; then
+		broute_filter_on_dscp "$dscp_filter"
+	fi
+
+	if [ ! -z $protocol ]; then
+		local proto_num=$(protocol_string_to_num "$protocol")
+		ebt_match_ip_protocol "$proto_num"
+
+		#port installation for protol tcp/udp/sctp
+		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ] ; then
+			set_ports "$cid" ebt_match_ip_src_port ebt_match_ip_dst_port
+		fi
+	fi
+}
+
+broute_ipv6_rule_options()
+{
+	local cid=$1
+
+	config_get protocol "$cid" "proto"
+	config_get dscp_filter "$cid" "dscp_filter"
+
+	set_ip_addr $cid ebt_match_ipv6_src_ip ebt_match_ipv6_dst_ip
+
+	if [ ! -z $dscp_filter ]; then
+		local tos_val
+		local tos_hex
+
+		tos_val=$(($dscp_filter<<2))
+		tos_hex=$(printf "%x" $tos_val)
+		ebt_match_ipv6_dscp "$tos_hex"
+	fi
+
+	if [ ! -z $protocol ]; then
+		local proto_num=$(protocol_string_to_num "$protocol")
+		ebt_match_ipv6_protocol "$proto_num"
+
+		#port installation for protol tcp/udp/sctp
+		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ]; then
+			set_ports "$cid" ebt_match_ipv6_src_port ebt_match_ipv6_dst_port
+		fi
+	fi
 }
 
 handle_ebtables_rules() {
@@ -360,6 +576,8 @@ handle_ebtables_rules() {
 	local is_l2_rule=0
 	local src_dhcp_options=""
 	local dst_dhcp_options=""
+	local protocol=""
+	local ip_version=""
 
 	init_broute_rule
 
@@ -377,8 +595,9 @@ handle_ebtables_rules() {
 	config_get dst_clid "$sid" "dst_client_id" # dhcp option 61
 	config_get src_ucid "$sid" "src_user_class_id" # dhcp option 77
 	config_get dst_ucid "$sid" "dst_user_class_id" # dhcp option 77
-
 	config_get traffic_class "$sid" "traffic_class"
+	config_get protocol "$sid" "proto"
+
 
 	if [ -n "$src_if" ]; then
 		for interf in $(db -q get hw.board.ethernetPortOrder); do
@@ -405,13 +624,6 @@ handle_ebtables_rules() {
 		is_l2_rule=1
 	fi
 
-	if [ -n "$dscp_filter" ]; then
-		# filter on ethertype and proto is same thing
-		broute_filter_on_ether_type IPv4
-		broute_filter_on_dscp $dscp_filter
-		is_l2_rule=1
-	fi
-
 	if [ -n "$eth_type" ]; then
 		broute_filter_on_ether_type $eth_type
 		is_l2_rule=1
@@ -422,6 +634,47 @@ handle_ebtables_rules() {
 		is_l2_rule=1
 	fi
 
+	case $eth_type in
+	IPv4|IPV4|0800)
+			ip_version=4
+		;;
+	IPv6|IPV6|86DD)
+			ip_version=6
+		;;
+	*)
+		if [ -z "$eth_type" ]; then
+			case $src_ip$dest_ip in
+			*.*)
+				ip_version=4
+				broute_filter_on_ether_type "IPv4"
+				;;
+			*:*)
+				ip_version=6
+				broute_filter_on_ether_type "IPv6"
+				;;
+			*)
+				if [ -n "$protocol" ] || [ -n "$dscp_filter" ]; then
+					ip_version=1 #neither ether_type nor ip address used
+					#ethertype is not configured by user so install 
+					#both proto ipv4 and ipv6 rule
+					BR6_RULE="$BR_RULE"
+					broute_filter_on_ether_type "IPv4"
+					broute_filter_on_ether_type6 "IPv6"
+				fi
+			esac
+		fi
+	esac
+
+	if [ $ip_version = "4" ] || [ $ip_version = "1" ]; then
+		broute_ipv4_rule_options "$sid"
+		is_l2_rule=1
+	fi
+
+	if [ $ip_version = "6" ] || [ $ip_version = "1" ]; then
+		broute_ipv6_rule_options "$sid"
+		is_l2_rule=1
+	fi
+
 	# first process options that will help figure our source mac address
 	# dhcp option for "vendor class id"
 	if [ -n "$src_vcid" ]; then
@@ -752,12 +1005,7 @@ handle_policer_rules() {
 		return
 	fi
 
-	# The policer object is not available on non BCM968* chips
-	if [ $POLICER_SKIP -eq 1 ]; then
-		assign_policer_to_port $ifname $pindex
-	else
-		config_ingress_rate_limit $ifname $ingress_rate $in_burst_size
-	fi
+	config_ingress_rate_limit $ifname $ingress_rate $in_burst_size
 
 }
 
@@ -852,11 +1100,16 @@ pre_configure_queue() {
 		mkdir -p /tmp/qos/queue_stats/$intf
 		touch /tmp/qos/queue_stats/$intf/q_idx
 		echo 0 > /tmp/qos/queue_stats/$intf/q_idx
+
+#		tm initialization pushing ahead of delcfg as
+#		porttminit bydefault configures all queue as SP configuration.
+#		that was causing WRR queue configuration failure.
+		tmctl porttminit --devtype 0 --if $intf --flag 0 --numqueues 8
+
 		i=0
 		for i in 0 1 2 3 4 5 6 7; do
 			tmctl delqcfg --devtype 0 --if $intf --qid $i &>/dev/null
 		done
-		tmctl porttminit --devtype 0 --if $intf --flag 0 --numqueues 8
 
 		mkdir -p /tmp/qos/$intf
 		touch /tmp/qos/$intf/q_order
@@ -875,17 +1128,15 @@ configure_queue() {
 configure_policer() {
 	# The policer object is not available on non BCM968* chips, just clean up
 	# the old config if any and return
-	if [ $POLICER_SKIP -eq 0 ]; then
-		for intf in $(db get hw.board.ethernetPortOrder); do
-			local unitport="$(get_port_number $intf)"
-			local unit=$(echo $unitport | cut -d ' ' -f 1)
-			local port=$(echo $unitport | cut -d ' ' -f 2)
-			# setting rate and burst size to 0 disables rate limiting
-			if [ $port != "" -a $unit != "" ]; then
-				ethswctl -c rxratectrl -n $unit -p $port -x 0 -y 0
-			fi
-		done
-	fi
+	for intf in $(db get hw.board.ethernetPortOrder); do
+		local unitport="$(get_port_number $intf)"
+		local unit=$(echo $unitport | cut -d ' ' -f 1)
+		local port=$(echo $unitport | cut -d ' ' -f 2)
+		# setting rate and burst size to 0 disables rate limiting
+		if [ $port != "" -a $unit != "" ]; then
+			ethswctl -c rxratectrl -n $unit -p $port -x 0 -y 0
+		fi
+	done
 
 	# Delete policer
 	local i=0
@@ -924,11 +1175,7 @@ configure_qos() {
 
 reload_qos() {
 	local service_name="$1"
-	local cpu_model="$(brcm_fw_tool -k info)"
-
-	case $cpu_model in
-		68*|6755) POLICER_SKIP=1 ;;
-	esac
+	local cpu_model="$(cat /proc/socinfo  | grep 'SoC Name' | cut -d':' -f2)"
 
 	if [ -z "$service_name" ]; then
 		configure_qos

questd/Makefile

@@ -1,21 +1,20 @@
 #
-# Copyright (C) 2013-2020 iopsys
+# Copyright (C) 2013-2022 iopsys
 #
 
 include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=5.2.3
+PKG_VERSION:=5.2.4
 
-PKG_SOURCE_VERSION:=cf54bd65ec821ac67f3aa1caeebcd3ea9aae07ad
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
-
+PKG_SOURCE_VERSION:=2ca3ae0c29dcbbf01282f6118eb8d5e5bc9a1c45
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+endif
 
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
@@ -23,8 +22,6 @@ PKG_LICENSE_FILES:=LICENSE
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 
-PKG_INSTALL:=
-
 define Package/questd
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +ubus +libpthread
@@ -36,6 +33,13 @@ define Package/questd/description
 	this information via ubus
 endef
 
+ifeq ($(LOCAL_DEV),1)
+CMAKE_OPTIONS:=-DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
+define Build/Prepare
+	$(CP) -rf ~/git/code/questd/* $(PKG_BUILD_DIR)/
+endef
+endif
+
 define Package/questd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/sbin

rulengd/Makefile

@@ -1,23 +1,22 @@
 #
-# Copyright (C) 2018 iopsys
+# Copyright (C) 2018-2022 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.2.6
+PKG_VERSION:=1.2.7
 PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
 
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=e323bebe85cd7fb4eeb6cee535188227bc9b81e3
+PKG_SOURCE_VERSION:=1f247e1afc845f47348febffa55fe40d8b552737
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
+endif
+
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
@@ -35,6 +34,14 @@ define Package/rulengd/description
 	rulengd listens for events and executes speficied methods if the incoming event arguments contain speficied ones.
 endef
 
+#CMAKE_OPTIONS:=-DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/code/rulengd/* $(PKG_BUILD_DIR)/
+endef
+endif
+
 define Package/rulengd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/bin

shflags/Makefile

@@ -1,51 +0,0 @@
-#
-# Copyright (C) 2012-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=shflags
-PKG_VERSION:=2012-06-11
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/kward/shflags.git
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=c12b30cebb92b49c5edb6df255c0952c65b4ddc6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_LICENSE:=LGPL-2.1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/shflags
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=shflags
-  DEPENDS:=+getopt
-  URL:=http://code.google.com/p/shflags/
-  MAINTAINER:=Luka Perkov <luka@openwrt.org>
-endef
-
-define Package/shflags/description
- command-line flags module for Unix shell scripts
-endef
-
-define Build/Configure
-endef
-
-define Build/Compile
-endef
-
-define Build/Install
-endef
-
-define Package/shflags/install
-	$(INSTALL_DIR) $(1)/usr/share/shflags
-	$(CP) $(PKG_BUILD_DIR)/source/1.0/src/shflags  $(1)/usr/share/shflags/shflags.sh
-endef
-
-$(eval $(call BuildPackage,shflags))

shflags/patches/000-strip.patch

@@ -1,763 +0,0 @@
---- a/source/1.0/src/shflags
-+++ b/source/1.0/src/shflags
-@@ -1,91 +1,10 @@
--# $Id$
--# vim:et:ft=sh:sts=2:sw=2
--#
--# Copyright 2008 Kate Ward. All Rights Reserved.
--# Released under the LGPL (GNU Lesser General Public License)
--#
--# shFlags -- Advanced command-line flag library for Unix shell scripts.
--# http://code.google.com/p/shflags/
--#
--# Author: kate.ward@forestent.com (Kate Ward)
--#
--# This module implements something like the google-gflags library available
--# from http://code.google.com/p/google-gflags/.
--#
--# FLAG TYPES: This is a list of the DEFINE_*'s that you can do.  All flags take
--# a name, default value, help-string, and optional 'short' name (one-letter
--# name).  Some flags have other arguments, which are described with the flag.
--#
--# DEFINE_string: takes any input, and intreprets it as a string.
--#
--# DEFINE_boolean: typically does not take any argument: say --myflag to set
--#   FLAGS_myflag to true, or --nomyflag to set FLAGS_myflag to false.
--#   Alternately, you can say
--#     --myflag=true  or --myflag=t or --myflag=0  or
--#     --myflag=false or --myflag=f or --myflag=1
--#   Passing an option has the same affect as passing the option once.
--#
--# DEFINE_float: takes an input and intreprets it as a floating point number. As
--#   shell does not support floats per-se, the input is merely validated as
--#   being a valid floating point value.
--#
--# DEFINE_integer: takes an input and intreprets it as an integer.
--#
--# SPECIAL FLAGS: There are a few flags that have special meaning:
--#   --help (or -?)  prints a list of all the flags in a human-readable fashion
--#   --flagfile=foo  read flags from foo.  (not implemented yet)
--#   --              as in getopt(), terminates flag-processing
--#
--# EXAMPLE USAGE:
--#
--#   -- begin hello.sh --
--#   #! /bin/sh
--#   . ./shflags
--#   DEFINE_string name 'world' "somebody's name" n
--#   FLAGS "$@" || exit $?
--#   eval set -- "${FLAGS_ARGV}"
--#   echo "Hello, ${FLAGS_name}."
--#   -- end hello.sh --
--#
--#   $ ./hello.sh -n Kate
--#   Hello, Kate.
--#
--# NOTE: Not all systems include a getopt version that supports long flags. On
--# these systems, only short flags are recognized.
--
--#==============================================================================
--# shFlags
--#
--# Shared attributes:
--#   flags_error: last error message
--#   flags_return: last return value
--#
--#   __flags_longNames: list of long names for all flags
--#   __flags_shortNames: list of short names for all flags
--#   __flags_boolNames: list of boolean flag names
--#
--#   __flags_opts: options parsed by getopt
--#
--# Per-flag attributes:
--#   FLAGS_<flag_name>: contains value of flag named 'flag_name'
--#   __flags_<flag_name>_default: the default flag value
--#   __flags_<flag_name>_help: the flag help string
--#   __flags_<flag_name>_short: the flag short name
--#   __flags_<flag_name>_type: the flag type
--#
--# Notes:
--# - lists of strings are space separated, and a null value is the '~' char.
--
--# return if FLAGS already loaded
- [ -n "${FLAGS_VERSION:-}" ] && return 0
- FLAGS_VERSION='1.0.3'
- 
--# return values
- FLAGS_TRUE=0
- FLAGS_FALSE=1
- FLAGS_ERROR=2
- 
--# reserved flag names
- FLAGS_RESERVED='ARGC ARGV ERROR FALSE HELP PARENT RESERVED TRUE VERSION'
- 
- _flags_debug() { echo "flags:DEBUG $@" >&2; }
-@@ -93,7 +12,6 @@ _flags_warn() { echo "flags:WARN $@" >&2
- _flags_error() { echo "flags:ERROR $@" >&2; }
- _flags_fatal() { echo "flags:FATAL $@" >&2; }
- 
--# specific shell checks
- if [ -n "${ZSH_VERSION:-}" ]; then
-   setopt |grep "^shwordsplit$" >/dev/null
-   if [ $? -ne ${FLAGS_TRUE} ]; then
-@@ -107,20 +25,15 @@ if [ -n "${ZSH_VERSION:-}" ]; then
-   fi
- fi
- 
--#
--# constants
--#
- 
--# getopt version
- __FLAGS_GETOPT_VERS_STD=0
- __FLAGS_GETOPT_VERS_ENH=1
- __FLAGS_GETOPT_VERS_BSD=2
- 
- getopt >/dev/null 2>&1
- case $? in
--  0) __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD} ;;  # bsd getopt
-+  0) __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD} ;;
-   2)
--    # TODO(kward): look into '-T' option to test the internal getopt() version
-     if [ "`getopt --version`" = '-- ' ]; then
-       __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD}
-     else
-@@ -133,82 +46,49 @@ case $? in
-     ;;
- esac
- 
--# getopt optstring lengths
- __FLAGS_OPTSTR_SHORT=0
- __FLAGS_OPTSTR_LONG=1
- 
- __FLAGS_NULL='~'
- 
--# flag info strings
- __FLAGS_INFO_DEFAULT='default'
- __FLAGS_INFO_HELP='help'
- __FLAGS_INFO_SHORT='short'
- __FLAGS_INFO_TYPE='type'
- 
--# flag lengths
- __FLAGS_LEN_SHORT=0
- __FLAGS_LEN_LONG=1
- 
--# flag types
- __FLAGS_TYPE_NONE=0
- __FLAGS_TYPE_BOOLEAN=1
- __FLAGS_TYPE_FLOAT=2
- __FLAGS_TYPE_INTEGER=3
- __FLAGS_TYPE_STRING=4
- 
--# set the constants readonly
- __flags_constants=`set |awk -F= '/^FLAGS_/ || /^__FLAGS_/ {print $1}'`
- for __flags_const in ${__flags_constants}; do
--  # skip certain flags
-   case ${__flags_const} in
-     FLAGS_HELP) continue ;;
-     FLAGS_PARENT) continue ;;
-   esac
--  # set flag readonly
-   if [ -z "${ZSH_VERSION:-}" ]; then
-     readonly ${__flags_const}
--  else  # handle zsh
-+  else
-     case ${ZSH_VERSION} in
-       [123].*) readonly ${__flags_const} ;;
--      *) readonly -g ${__flags_const} ;;  # declare readonly constants globally
-+      *) readonly -g ${__flags_const} ;;
-     esac
-   fi
- done
- unset __flags_const __flags_constants
- 
--#
--# internal variables
--#
--
--__flags_boolNames=' '  # space separated list of boolean flag names
--__flags_longNames=' '  # space separated list of long flag names
--__flags_shortNames=' '  # space separated list of short flag names
--
--__flags_columns=''  # screen width in columns
--__flags_opts=''  # temporary storage for parsed getopt flags
--
--#------------------------------------------------------------------------------
--# private functions
--#
--
--# Define a flag.
--#
--# Calling this function will define the following info variables for the
--# specified flag:
--#   FLAGS_flagname - the name for this flag (based upon the long flag name)
--#   __flags_<flag_name>_default - the default value
--#   __flags_flagname_help - the help string
--#   __flags_flagname_short - the single letter alias
--#   __flags_flagname_type - the type of flag (one of __FLAGS_TYPE_*)
--#
--# Args:
--#   _flags__type: integer: internal type of flag (__FLAGS_TYPE_*)
--#   _flags__name: string: long flag name
--#   _flags__default: default flag value
--#   _flags__help: string: help string
--#   _flags__short: string: (optional) short flag name
--# Returns:
--#   integer: success of operation, or error
-+
-+__flags_boolNames=' '
-+__flags_longNames=' '
-+__flags_shortNames=' '
-+__flags_columns=''
-+__flags_opts=''
-+
- _flags_define()
- {
-   if [ $# -lt 4 ]; then
-@@ -226,16 +106,13 @@ _flags_define()
- 
-   _flags_return_=${FLAGS_TRUE}
- 
--  # TODO(kward): check for validity of the flag name (e.g. dashes)
- 
--  # check whether the flag name is reserved
-   echo " ${FLAGS_RESERVED} " |grep " ${_flags_name_} " >/dev/null
-   if [ $? -eq 0 ]; then
-     flags_error="flag name (${_flags_name_}) is reserved"
-     _flags_return_=${FLAGS_ERROR}
-   fi
- 
--  # require short option for getopt that don't support long options
-   if [ ${_flags_return_} -eq ${FLAGS_TRUE} \
-       -a ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} \
-       -a "${_flags_short_}" = "${__FLAGS_NULL}" ]
-@@ -244,7 +121,6 @@ _flags_define()
-     _flags_return_=${FLAGS_ERROR}
-   fi
- 
--  # check for existing long name definition
-   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
-     if _flags_itemInList "${_flags_name_}" \
-         ${__flags_longNames} ${__flags_boolNames}
-@@ -255,7 +131,6 @@ _flags_define()
-     fi
-   fi
- 
--  # check for existing short name definition
-   if [ ${_flags_return_} -eq ${FLAGS_TRUE} \
-       -a "${_flags_short_}" != "${__FLAGS_NULL}" ]
-   then
-@@ -266,9 +141,6 @@ _flags_define()
-     fi
-   fi
- 
--  # handle default value. note, on several occasions the 'if' portion of an
--  # if/then/else contains just a ':' which does nothing. a binary reversal via
--  # '!' is not done because it does not work on all shells.
-   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
-     case ${_flags_type_} in
-       ${__FLAGS_TYPE_BOOLEAN})
-@@ -301,7 +173,7 @@ _flags_define()
-         fi
-         ;;
- 
--      ${__FLAGS_TYPE_STRING}) ;;  # everything in shell is a valid string
-+      ${__FLAGS_TYPE_STRING}) ;;
- 
-       *)
-         flags_error="unrecognized flag type '${_flags_type_}'"
-@@ -311,7 +183,6 @@ _flags_define()
-   fi
- 
-   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
--    # store flag information
-     eval "FLAGS_${_flags_name_}='${_flags_default_}'"
-     eval "__flags_${_flags_name_}_${__FLAGS_INFO_TYPE}=${_flags_type_}"
-     eval "__flags_${_flags_name_}_${__FLAGS_INFO_DEFAULT}=\
-@@ -319,7 +190,6 @@ _flags_define()
-     eval "__flags_${_flags_name_}_${__FLAGS_INFO_HELP}=\"${_flags_help_}\""
-     eval "__flags_${_flags_name_}_${__FLAGS_INFO_SHORT}='${_flags_short_}'"
- 
--    # append flag name(s) to list of names
-     __flags_longNames="${__flags_longNames}${_flags_name_} "
-     __flags_shortNames="${__flags_shortNames}${_flags_short_} "
-     [ ${_flags_type_} -eq ${__FLAGS_TYPE_BOOLEAN} ] && \
-@@ -333,17 +203,6 @@ _flags_define()
-   return ${flags_return}
- }
- 
--# Return valid getopt options using currently defined list of long options.
--#
--# This function builds a proper getopt option string for short (and long)
--# options, using the current list of long options for reference.
--#
--# Args:
--#   _flags_optStr: integer: option string type (__FLAGS_OPTSTR_*)
--# Output:
--#   string: generated option string for getopt
--# Returns:
--#   boolean: success of operation (always returns True)
- _flags_genOptStr()
- {
-   _flags_optStrType_=$1
-@@ -358,7 +217,6 @@ _flags_genOptStr()
-             ${_flags_flag_} ${__FLAGS_INFO_SHORT}`
-         if [ "${_flags_shortName_}" != "${__FLAGS_NULL}" ]; then
-           _flags_opts_="${_flags_opts_}${_flags_shortName_}"
--          # getopt needs a trailing ':' to indicate a required argument
-           [ ${_flags_type_} -ne ${__FLAGS_TYPE_BOOLEAN} ] && \
-               _flags_opts_="${_flags_opts_}:"
-         fi
-@@ -366,7 +224,6 @@ _flags_genOptStr()
- 
-       ${__FLAGS_OPTSTR_LONG})
-         _flags_opts_="${_flags_opts_:+${_flags_opts_},}${_flags_flag_}"
--        # getopt needs a trailing ':' to indicate a required argument
-         [ ${_flags_type_} -ne ${__FLAGS_TYPE_BOOLEAN} ] && \
-             _flags_opts_="${_flags_opts_}:"
-         ;;
-@@ -379,15 +236,6 @@ _flags_genOptStr()
-   return ${FLAGS_TRUE}
- }
- 
--# Returns flag details based on a flag name and flag info.
--#
--# Args:
--#   string: long flag name
--#   string: flag info (see the _flags_define function for valid info types)
--# Output:
--#   string: value of dereferenced flag variable
--# Returns:
--#   integer: one of FLAGS_{TRUE|FALSE|ERROR}
- _flags_getFlagInfo()
- {
-   _flags_name_=$1
-@@ -399,13 +247,6 @@ _flags_getFlagInfo()
-   if [ -n "${_flags_value_}" ]; then
-     flags_return=${FLAGS_TRUE}
-   else
--    # see if the _flags_name_ variable is a string as strings can be empty...
--    # note: the DRY principle would say to have this function call itself for
--    # the next three lines, but doing so results in an infinite loop as an
--    # invalid _flags_name_ will also not have the associated _type variable.
--    # Because it doesn't (it will evaluate to an empty string) the logic will
--    # try to find the _type variable of the _type variable, and so on. Not so
--    # good ;-)
-     _flags_typeVar_="__flags_${_flags_name_}_${__FLAGS_INFO_TYPE}"
-     _flags_strToEval_="_flags_type_=\"\${${_flags_typeVar_}:-}\""
-     eval "${_flags_strToEval_}"
-@@ -424,15 +265,6 @@ _flags_getFlagInfo()
-   return ${flags_return}
- }
- 
--# check for presense of item in a list. passed a string (e.g. 'abc'), this
--# function will determine if the string is present in the list of strings (e.g.
--# ' foo bar abc ').
--#
--# Args:
--#   _flags__str: string: string to search for in a list of strings
--#   unnamed: list: list of strings
--# Returns:
--#   boolean: true if item is in the list
- _flags_itemInList()
- {
-   _flags_str_=$1
-@@ -449,34 +281,22 @@ _flags_itemInList()
-   return ${flags_return}
- }
- 
--# Returns the width of the current screen.
--#
--# Output:
--#   integer: width in columns of the current screen.
- _flags_columns()
- {
-   if [ -z "${__flags_columns}" ]; then
--    # determine the value and store it
-     if eval stty size >/dev/null 2>&1; then
--      # stty size worked :-)
-       set -- `stty size`
-       __flags_columns=$2
-     elif eval tput cols >/dev/null 2>&1; then
-       set -- `tput cols`
-       __flags_columns=$1
-     else
--      __flags_columns=80  # default terminal width
-+      __flags_columns=80
-     fi
-   fi
-   echo ${__flags_columns}
- }
- 
--# Validate a boolean.
--#
--# Args:
--#   _flags__bool: boolean: value to validate
--# Returns:
--#   bool: true if the value is a valid boolean
- _flags_validateBoolean()
- {
-   _flags_bool_=$1
-@@ -492,12 +312,6 @@ _flags_validateBoolean()
-   return ${flags_return}
- }
- 
--# Validate a float.
--#
--# Args:
--#   _flags__float: float: value to validate
--# Returns:
--#   bool: true if the value is a valid float
- _flags_validateFloat()
- {
-   _flags_float_=$1
-@@ -507,10 +321,10 @@ _flags_validateFloat()
-   else
-     flags_return=${FLAGS_TRUE}
-     case ${_flags_float_} in
--      -*)  # negative floats
-+      -*)
-         _flags_test_=`expr "${_flags_float_}" : '\(-[0-9][0-9]*\.[0-9][0-9]*\)'`
-         ;;
--      *)  # positive floats
-+      *)
-         _flags_test_=`expr "${_flags_float_}" : '\([0-9][0-9]*\.[0-9][0-9]*\)'`
-         ;;
-     esac
-@@ -521,22 +335,16 @@ _flags_validateFloat()
-   return ${flags_return}
- }
- 
--# Validate an integer.
--#
--# Args:
--#   _flags__integer: interger: value to validate
--# Returns:
--#   bool: true if the value is a valid integer
- _flags_validateInteger()
- {
-   _flags_int_=$1
- 
-   flags_return=${FLAGS_TRUE}
-   case ${_flags_int_} in
--    -*)  # negative ints
-+    -*)
-       _flags_test_=`expr "${_flags_int_}" : '\(-[0-9][0-9]*\)'`
-       ;;
--    *)  # positive ints
-+    *)
-       _flags_test_=`expr "${_flags_int_}" : '\([0-9][0-9]*\)'`
-       ;;
-   esac
-@@ -546,23 +354,12 @@ _flags_validateInteger()
-   return ${flags_return}
- }
- 
--# Parse command-line options using the standard getopt.
--#
--# Note: the flag options are passed around in the global __flags_opts so that
--# the formatting is not lost due to shell parsing and such.
--#
--# Args:
--#   @: varies: command-line options to parse
--# Returns:
--#   integer: a FLAGS success condition
- _flags_getoptStandard()
- {
-   flags_return=${FLAGS_TRUE}
-   _flags_shortOpts_=`_flags_genOptStr ${__FLAGS_OPTSTR_SHORT}`
- 
--  # check for spaces in passed options
-   for _flags_opt_ in "$@"; do
--    # note: the silliness with the x's is purely for ksh93 on Ubuntu 6.06
-     _flags_match_=`echo "x${_flags_opt_}x" |sed 's/ //g'`
-     if [ "${_flags_match_}" != "x${_flags_opt_}x" ]; then
-       flags_error='the available getopt does not support spaces in options'
-@@ -585,15 +382,6 @@ _flags_getoptStandard()
-   return ${flags_return}
- }
- 
--# Parse command-line options using the enhanced getopt.
--#
--# Note: the flag options are passed around in the global __flags_opts so that
--# the formatting is not lost due to shell parsing and such.
--#
--# Args:
--#   @: varies: command-line options to parse
--# Returns:
--#   integer: a FLAGS success condition
- _flags_getoptEnhanced()
- {
-   flags_return=${FLAGS_TRUE}
-@@ -617,17 +405,6 @@ _flags_getoptEnhanced()
-   return ${flags_return}
- }
- 
--# Dynamically parse a getopt result and set appropriate variables.
--#
--# This function does the actual conversion of getopt output and runs it through
--# the standard case structure for parsing. The case structure is actually quite
--# dynamic to support any number of flags.
--#
--# Args:
--#   argc: int: original command-line argument count
--#   @: varies: output from getopt parsing
--# Returns:
--#   integer: a FLAGS success condition
- _flags_parseGetopt()
- {
-   _flags_argc_=$1
-@@ -638,35 +415,26 @@ _flags_parseGetopt()
-   if [ ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} ]; then
-     set -- $@
-   else
--    # note the quotes around the `$@' -- they are essential!
-     eval set -- "$@"
-   fi
- 
--  # provide user with number of arguments to shift by later
--  # NOTE: the FLAGS_ARGC variable is obsolete as of 1.0.3 because it does not
--  # properly give user access to non-flag arguments mixed in between flag
--  # arguments. Its usage was replaced by FLAGS_ARGV, and it is being kept only
--  # for backwards compatibility reasons.
-   FLAGS_ARGC=`expr $# - 1 - ${_flags_argc_}`
- 
--  # handle options. note options with values must do an additional shift
-   while true; do
-     _flags_opt_=$1
-     _flags_arg_=${2:-}
-     _flags_type_=${__FLAGS_TYPE_NONE}
-     _flags_name_=''
- 
--    # determine long flag name
-     case "${_flags_opt_}" in
--      --) shift; break ;;  # discontinue option parsing
-+      --) shift; break ;;
- 
--      --*)  # long option
-+      --*)
-         _flags_opt_=`expr "${_flags_opt_}" : '--\(.*\)'`
-         _flags_len_=${__FLAGS_LEN_LONG}
-         if _flags_itemInList "${_flags_opt_}" ${__flags_longNames}; then
-           _flags_name_=${_flags_opt_}
-         else
--          # check for negated long boolean version
-           if _flags_itemInList "${_flags_opt_}" ${__flags_boolNames}; then
-             _flags_name_=`expr "${_flags_opt_}" : 'no\(.*\)'`
-             _flags_type_=${__FLAGS_TYPE_BOOLEAN}
-@@ -675,12 +443,10 @@ _flags_parseGetopt()
-         fi
-         ;;
- 
--      -*)  # short option
-+      -*)
-         _flags_opt_=`expr "${_flags_opt_}" : '-\(.*\)'`
-         _flags_len_=${__FLAGS_LEN_SHORT}
-         if _flags_itemInList "${_flags_opt_}" ${__flags_shortNames}; then
--          # yes. match short name to long name. note purposeful off-by-one
--          # (too high) with awk calculations.
-           _flags_pos_=`echo "${__flags_shortNames}" \
-               |awk 'BEGIN{RS=" ";rn=0}$0==e{rn=NR}END{print rn}' \
-                   e=${_flags_opt_}`
-@@ -690,14 +456,12 @@ _flags_parseGetopt()
-         ;;
-     esac
- 
--    # die if the flag was unrecognized
-     if [ -z "${_flags_name_}" ]; then
-       flags_error="unrecognized option (${_flags_opt_})"
-       flags_return=${FLAGS_ERROR}
-       break
-     fi
- 
--    # set new flag value
-     [ ${_flags_type_} -eq ${__FLAGS_TYPE_NONE} ] && \
-         _flags_type_=`_flags_getFlagInfo \
-             "${_flags_name_}" ${__FLAGS_INFO_TYPE}`
-@@ -746,7 +510,6 @@ _flags_parseGetopt()
-         ;;
-     esac
- 
--    # handle special case help flag
-     if [ "${_flags_name_}" = 'help' ]; then
-       if [ ${FLAGS_help} -eq ${FLAGS_TRUE} ]; then
-         flags_help
-@@ -756,12 +519,10 @@ _flags_parseGetopt()
-       fi
-     fi
- 
--    # shift the option and non-boolean arguements out.
-     shift
-     [ ${_flags_type_} != ${__FLAGS_TYPE_BOOLEAN} ] && shift
-   done
- 
--  # give user back non-flag arguments
-   FLAGS_ARGV=''
-   while [ $# -gt 0 ]; do
-     FLAGS_ARGV="${FLAGS_ARGV:+${FLAGS_ARGV} }'$1'"
-@@ -773,43 +534,18 @@ _flags_parseGetopt()
-   return ${flags_return}
- }
- 
--#------------------------------------------------------------------------------
--# public functions
--#
--
--# A basic boolean flag. Boolean flags do not take any arguments, and their
--# value is either 1 (false) or 0 (true). For long flags, the false value is
--# specified on the command line by prepending the word 'no'. With short flags,
--# the presense of the flag toggles the current value between true and false.
--# Specifying a short boolean flag twice on the command results in returning the
--# value back to the default value.
--#
--# A default value is required for boolean flags.
--#
--# For example, lets say a Boolean flag was created whose long name was 'update'
--# and whose short name was 'x', and the default value was 'false'. This flag
--# could be explicitly set to 'true' with '--update' or by '-x', and it could be
--# explicitly set to 'false' with '--noupdate'.
-+
- DEFINE_boolean() { _flags_define ${__FLAGS_TYPE_BOOLEAN} "$@"; }
- 
--# Other basic flags.
- DEFINE_float()   { _flags_define ${__FLAGS_TYPE_FLOAT} "$@"; }
- DEFINE_integer() { _flags_define ${__FLAGS_TYPE_INTEGER} "$@"; }
- DEFINE_string()  { _flags_define ${__FLAGS_TYPE_STRING} "$@"; }
- 
--# Parse the flags.
--#
--# Args:
--#   unnamed: list: command-line flags to parse
--# Returns:
--#   integer: success of operation, or error
- FLAGS()
- {
--  # define a standard 'help' flag if one isn't already defined
-   [ -z "${__flags_help_type:-}" ] && \
-       DEFINE_boolean 'help' false 'show this help' 'h'
- 
--  # parse options
-   if [ $# -gt 0 ]; then
-     if [ ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} ]; then
-       _flags_getoptStandard "$@"
-@@ -818,7 +554,6 @@ FLAGS()
-     fi
-     flags_return=$?
-   else
--    # nothing passed; won't bother running getopt
-     __flags_opts='--'
-     flags_return=${FLAGS_TRUE}
-   fi
-@@ -832,23 +567,11 @@ FLAGS()
-   return ${flags_return}
- }
- 
--# This is a helper function for determining the `getopt` version for platforms
--# where the detection isn't working. It simply outputs debug information that
--# can be included in a bug report.
--#
--# Args:
--#   none
--# Output:
--#   debug info that can be included in a bug report
--# Returns:
--#   nothing
- flags_getoptInfo()
- {
--  # platform info
-   _flags_debug "uname -a: `uname -a`"
-   _flags_debug "PATH: ${PATH}"
- 
--  # shell info
-   if [ -n "${BASH_VERSION:-}" ]; then
-     _flags_debug 'shell: bash'
-     _flags_debug "BASH_VERSION: ${BASH_VERSION}"
-@@ -857,7 +580,6 @@ flags_getoptInfo()
-     _flags_debug "ZSH_VERSION: ${ZSH_VERSION}"
-   fi
- 
--  # getopt info
-   getopt >/dev/null
-   _flags_getoptReturn=$?
-   _flags_debug "getopt return: ${_flags_getoptReturn}"
-@@ -866,39 +588,16 @@ flags_getoptInfo()
-   unset _flags_getoptReturn
- }
- 
--# Returns whether the detected getopt version is the enhanced version.
--#
--# Args:
--#   none
--# Output:
--#   none
--# Returns:
--#   bool: true if getopt is the enhanced version
- flags_getoptIsEnh()
- {
-   test ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_ENH}
- }
- 
--# Returns whether the detected getopt version is the standard version.
--#
--# Args:
--#   none
--# Returns:
--#   bool: true if getopt is the standard version
- flags_getoptIsStd()
- {
-   test ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_STD}
- }
- 
--# This is effectively a 'usage()' function. It prints usage information and
--# exits the program with ${FLAGS_FALSE} if it is ever found in the command line
--# arguments. Note this function can be overridden so other apps can define
--# their own --help flag, replacing this one, if they want.
--#
--# Args:
--#   none
--# Returns:
--#   integer: success of operation (always returns true)
- flags_help()
- {
-   if [ -n "${FLAGS_HELP:-}" ]; then
-@@ -953,19 +652,14 @@ flags_help()
-         echo "${flags_helpStr_}" >&2
-       else
-         echo "  ${flags_flagStr_}  ${flags_help_}" >&2
--        # note: the silliness with the x's is purely for ksh93 on Ubuntu 6.06
--        # because it doesn't like empty strings when used in this manner.
-         flags_emptyStr_="`echo \"x${flags_flagStr_}x\" \
-             |awk '{printf "%"length($0)-2"s", ""}'`"
-         flags_helpStr_="  ${flags_emptyStr_}  ${flags_defaultStr_}"
-         flags_helpStrLen_=`expr "${flags_helpStr_}" : '.*'`
-         if [ ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_STD} \
-             -o ${flags_helpStrLen_} -lt ${flags_columns_} ]; then
--          # indented to match help string
-           echo "${flags_helpStr_}" >&2
-         else
--          # indented four from left to allow for longer defaults as long flag
--          # names might be used too, making things too long
-           echo "    ${flags_defaultStr_}" >&2
-         fi
-       fi
-@@ -978,12 +672,6 @@ flags_help()
-   return ${FLAGS_TRUE}
- }
- 
--# Reset shflags back to an uninitialized state.
--#
--# Args:
--#   none
--# Returns:
--#   nothing
- flags_reset()
- {
-   for flags_name_ in ${__flags_longNames}; do
-@@ -1000,7 +688,6 @@ flags_reset()
-     eval ${flags_strToEval_}
-   done
- 
--  # reset internal variables
-   __flags_boolNames=' '
-   __flags_longNames=' '
-   __flags_shortNames=' '

stunc/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,38 +8,83 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=stunc
-PKG_VERSION:=1.0.4
+PKG_RELEASE:=1
+PKG_VERSION:=1.1.11
 
-PKG_SOURCE_VERSION:=9c585888cae94180d715f46f6602090f328240d4
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/stunc.git
-
+PKG_SOURCE_VERSION:=5afef8d2040fa31a73e6320c8a65b891a88518de
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+endif
 
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
-define Package/$(PKG_NAME)
+define Package/stunc/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF STUN Client
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json +libbbf_api
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libblobmsg-json
 endef
 
-define Package/$(PKG_NAME)/description
-	BBF STUN Client
+define Package/stunc-mbedtls
+  $(Package/stunc/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_stunc-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/stunc-openssl
+  $(Package/stunc/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_stunc-openssl:libopenssl
+  CONFLICTS := stunc-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/stunc-wolfssl
+  $(Package/stunc/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_stunc-wolfssl:libwolfssl
+  CONFLICTS := stunc-mbedtls stunc-openssl
+  VARIANT:=wolfssl
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall -Werror
 
-define Package/$(PKG_NAME)/install
+ifeq ($(BUILD_VARIANT),wolfssl)
+  MAKE_FLAGS += \
+	USE_WOLFSSL="yes"
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+  MAKE_FLAGS += \
+	USE_MBEDTLS="yes"
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+  MAKE_FLAGS += \
+	USE_OPENSSL="yes"
+endif
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/stunc/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/stunc/default/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/init.d
@@ -50,4 +95,10 @@ define Package/$(PKG_NAME)/install
 	$(INSTALL_DATA) ./files/etc/config/stunc $(1)/etc/config/stunc
 endef
 
-$(eval $(call BuildPackage,$(PKG_NAME)))
+Package/stunc-openssl/install = $(Package/stunc/default/install)
+Package/stunc-wolfssl/install = $(Package/stunc/default/install)
+Package/stunc-mbedtls/install = $(Package/stunc/default/install)
+
+$(eval $(call BuildPackage,stunc-openssl))
+$(eval $(call BuildPackage,stunc-wolfssl))
+$(eval $(call BuildPackage,stunc-mbedtls))

stunc/files/etc/config/stunc

@@ -8,5 +8,5 @@ config stunc 'stunc'
 	option min_keepalive '30'
 	option max_keepalive '3600'
 #	option client_port 7547
-	option log_level '0'
+	option log_level '1'
 

stunc/files/etc/init.d/stunc

@@ -36,11 +36,6 @@ start_service() {
 		return 0;
 	fi
 
-	if [ -z "${server_address}" ]; then
-		log "Stun server address not defined or invalid"
-		return 0;
-	fi
-
 	procd_open_instance stunc
 	procd_set_param command ${PROG}
 	procd_set_param respawn "3" "7" "0"

sulu/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=sulu
-PKG_VERSION:=0.2.29
+PKG_VERSION:=1.0.12
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/sulu.git
-PKG_SOURCE_VERSION:=5c722ca387ffdd28ac2a2e01f27dba12015fc2e7
+PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu.git
+PKG_SOURCE_VERSION:=fc82a32ab3cdcb18dc3aa7b907c62d8bed29b4ff
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz

swmodd/Makefile

@@ -1,23 +1,26 @@
 #
-# Copyright (C) 2020 IOPSYS
+# Copyright (C) 2022 IOPSYS Software Solutions AB
 #
-# 
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=swmodd
-PKG_VERSION:=2.0.21
+PKG_VERSION:=2.1.5
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=78b54d0ed0223a9787133597d3beaa5e97d97520
+PKG_SOURCE_VERSION:=2f953ea76b5779a73a540777dfb450982802e4f8
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/swmodd.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DEPENDS:=bbf
+
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -26,7 +29,7 @@ define Package/swmodd
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:= Software Modules Daemon
-  DEPENDS:=+libuci +libubox +ubus +libuuid +libbbf_api +opkg +libcurl \
+  DEPENDS:=+libuci +libubox +ubus +libuuid +opkg +libcurl \
 	    +PACKAGE_liblxc:liblxc +PACKAGE_liblxc:cgroupfs-mount \
 	    +@BUSYBOX_CONFIG_BUSYBOX +@BUSYBOX_CONFIG_FEATURE_SHOW_SCRIPT
 endef
@@ -41,7 +44,8 @@ endef
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall -Werror
 
 ifeq ($(CONFIG_PACKAGE_liblxc),y)
 MAKE_FLAGS += \
@@ -61,10 +65,12 @@ endif
 
 define Package/swmodd/install
 	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_DIR) $(1)/etc/swmod
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/swmodd.init $(1)/etc/init.d/swmodd
+	$(INSTALL_BIN) ./files/etc/init.d/swmodd $(1)/etc/init.d/swmodd
+	$(INSTALL_BIN) ./files/etc/config/swmodd $(1)/etc/config/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/swmodd $(1)/usr/sbin/swmodd
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libswmodd.so $(1)/usr/lib/bbfdm/libswmodd.so
 ifeq ($(CONFIG_PACKAGE_liblxc),y)