map-topology: add ieee1905 dependency

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@iopsys.eu>

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -25,7 +25,3 @@ config BBFDM_ENABLE_JSON_PLUGIN
 config BBFDM_ENABLE_DOTSO_PLUGIN
 	bool "Enable shared library plugin to extend datamodel"
 	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.9.3
+PKG_VERSION:=6.6.35
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=afec1eba79cbe70192a066f4ac007d3a071a14c9
+PKG_SOURCE_VERSION:=0159ecf5d84805d76dff8cb80831334e200989c7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -18,15 +18,14 @@ PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  ABI_VERSION:=1.0
+  TITLE:=Library for libbbfdm API
 endef
 
 define Package/libbbfdm/default
@@ -34,7 +33,7 @@ define Package/libbbfdm/default
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl +libbbf_api
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
 endef
 
 define Package/libbbfdm
@@ -86,50 +85,56 @@ define Build/Prepare
 endef
 endif
 
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+CONFIGURE_ARGS += \
+	--enable-tr181
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
+CONFIGURE_ARGS += \
+	--enable-tr104
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
+CONFIGURE_ARGS += \
+	--enable-tr143
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
 
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
 ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
+CONFIGURE_ARGS += \
+	--enable-json-plugin
 endif
 
 ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
+CONFIGURE_ARGS += \
+	--enable-shared-library
 endif
 
 ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+CONFIGURE_ARGS += --enable-libopenssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
 endif
 
 ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+CONFIGURE_ARGS += --enable-libwolfssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += --enable-libmbedtls
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
 endif
 
 define Package/libbbf_api/install
@@ -143,7 +148,7 @@ define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 endef
 
@@ -169,7 +174,8 @@ define Build/InstallDev
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
 endef
 
 $(eval $(call BuildPackage,libbbf_api))

bulkdata/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.6
+PKG_VERSION:=2.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=b6e731bcaa7b3b41d5565c4d9c54d3ef9e315084
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -25,6 +25,8 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -32,7 +34,7 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
@@ -48,8 +50,8 @@ endif
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/init.d/bulkdatad

@@ -7,12 +7,9 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
 
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	[ "$enable" -ne "1" ] && {
+	[ "$enable" != "1" ] && {
 		return 0
 	}
 
@@ -22,6 +19,10 @@ start_service() {
 	procd_close_instance
 }
 
+boot() {
+	start
+}
+
 reload_service() {
 	stop
 	start 

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.5
+PKG_VERSION:=3.5.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c5695bc92f7f22089c9a85d3e1f4dac7c12ca900
+PKG_SOURCE_VERSION:=8c94908eb230dc453dd2f5575be6c06b086b2e7d
 PKG_MIRROR_HASH:=skip
 endif
 

dectmngr/files/etc/init.d/dectmngr

@@ -11,8 +11,6 @@ PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
 	pidof $NAME && killall -q $NAME
@@ -32,7 +30,7 @@ start_service() {
 
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -73,7 +71,7 @@ start_service() {
 stop_service() {
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
@@ -88,10 +86,8 @@ service_triggers()
 }
 
 boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet)
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
 endef
 
 define Package/easy-qos/description

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.7.3
+PKG_VERSION:=6.4.44
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=4dff7b6b9f742e52ee9e4034f8da74162a02c823
+PKG_SOURCE_VERSION:=e4f811b7cd2836cdcce5ea0f97f515a317da5bc3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -38,36 +38,26 @@ endef
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
-export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
@@ -97,7 +87,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_iopsys_econet:ecnt_api
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
 endef
 
 define Package/libethernet/config

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=0901382048bb7ce01fc1767fef75e54692f56743
+PKG_SOURCE_VERSION:=2390a3503990e04e33e8e448ad9dccc00f206908
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -30,7 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BRCM_SDK_VER_504021
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk

evoice/Makefile

@@ -5,22 +5,21 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=evoice
-PKG_VERSION:=0.2.30
+PKG_VERSION:=0.2.1
 
 LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=ee4e9e00ec1c54b41e15a3de38f6a733634622dd
+PKG_SOURCE_VERSION:=f2477946f9e142d01820b38e32ce98a781e0310e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
+
 # All config variable that are passed to the make invocation, directly or
 # indirectly. This ensures that the package is rebuilt on config-changes.
 #PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
@@ -32,10 +31,7 @@ define Package/$(PKG_NAME)
 	SUBMENU:=Telephony
 	TITLE:=Ensemble Voice
 	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_iopsys_brcm63xx_arm:bcmkernel\
-		+TARGET_iopsys_econet:kmod-voip_driver\
-		+TARGET_iopsys_econet:voip_app +libbbf_api
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +TARGET_iopsys_brcm63xx_arm:bcmkernel +TARGET_iopsys_econet:kmod-voip_driver
 endef
 
 define Package/$(PKG_NAME)/description
@@ -44,60 +40,33 @@ endef
 
 ifeq ($(LOCAL_DEV),1)
 # If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+# LOCAL_DEV and change the path below to your own git repository.
 define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+	rsync -av /swdev/bide/evoice_clean/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
+	export IDIR = $(STAGING_DIR)/usr/include
+	export BDIR = bcm963xx/userspace/private/apps/voice
+	export _XFLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc -I$(IDIR)/bcm963xx/xchg/bos/publicInc -I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
 else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
 	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
 endif
 
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
 export TARGET_PLATFORM
 
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
 
 define Build/Compile
 	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=SVrgBcmFxs LIF=cerder DBG=dbg
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=libvoiceservice LIF=cerder DBG=dbg
 endef
 
 define Package/evoice/install
 	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/

evoice/files/etc/config/voice

@@ -39,33 +39,51 @@ config SIPNetwork 'Network1'
 	list CodecList '1CodecProfile5'
 	list CodecList '1CodecProfile4'
 
+config Capabilities 'Capabilities'
+	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+
+config CapabilitiesCodec 'Codec5'
+	option Codec 'G.729'
+
 config CodecProfile '1CodecProfile1'
 	option Enable '1'
-	option Codec 'G.711ALaw'
+	option Codec 'Codec1'
 	option PacketizationPeriod '20'
 	option SilenceSupression '1'
 
 config CodecProfile '1CodecProfile2'
 	option Enable '1'
-	option Codec 'G.711MuLaw'
+	option Codec 'Codec2'
 	option PacketizationPeriod '20'
 	option SilenceSupression '1'
 
 config CodecProfile '1CodecProfile3'
 	option Enable '1'
-	option Codec 'G.726'
+	option Codec 'Codec3'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
 config CodecProfile '1CodecProfile4'
 	option Enable '1'
-	option Codec 'G.722'
+	option Codec 'Codec4'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
 config CodecProfile '1CodecProfile5'
 	option Enable '1'
-	option Codec 'G.729'
+	option Codec 'Codec5'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
@@ -131,7 +149,7 @@ config IncomingMap 'IncomingMap2'
 	option Line 'Line2'
 
 config IncomingMap 'IncomingMap3'
-	option Enable '0'
+	option Enable '1'
 	option Extension 'Extension2'
 	option Line 'Line1'
 
@@ -204,15 +222,15 @@ config NumberingPlan 'NumberingPlan2'
 	option InterDigitTimerStd '2000'
 	option InterDigitTimerOpen '2000'
 	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
+	list PrefixList '3PrefixInfo1'
+	list PrefixList '3PrefixInfo2'
+	list PrefixList '3PrefixInfo3'
+	list PrefixList '3PrefixInfo4'
+	list PrefixList '3PrefixInfo5'
+	list PrefixList '3PrefixInfo6'
+	list PrefixList '3PrefixInfo7'
+	list PrefixList '3PrefixInfo8'
+	list PrefixList '3PrefixInfo9'
 
 config NumberingPlan 'NumberingPlan3'
 	option MinimumNumberOfDigits '5'
@@ -220,9 +238,9 @@ config NumberingPlan 'NumberingPlan3'
 	option InterDigitTimerStd '2000'
 	option InterDigitTimerOpen '2000'
 	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
+	list PrefixList '4PrefixInfo1'
 
-config PrefixInfo '2PrefixInfo1'
+config PrefixInfo '3PrefixInfo1'
 	option Enable '1'
 	option PrefixRange '*43#'
 	option PrefixMinNumberOfDigits '4'
@@ -232,7 +250,7 @@ config PrefixInfo '2PrefixInfo1'
 	option FacilityAction 'CW_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo2'
+config PrefixInfo '3PrefixInfo2'
 	option Enable '1'
 	option PrefixRange '#43#'
 	option PrefixMinNumberOfDigits '4'
@@ -242,7 +260,7 @@ config PrefixInfo '2PrefixInfo2'
 	option FacilityAction 'CW_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo3'
+config PrefixInfo '3PrefixInfo3'
 	option Enable '1'
 	option PrefixRange '*21*(X+)#'
 	option PrefixMinNumberOfDigits '9'
@@ -252,7 +270,7 @@ config PrefixInfo '2PrefixInfo3'
 	option FacilityAction 'CFU_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo4'
+config PrefixInfo '3PrefixInfo4'
 	option Enable '1'
 	option PrefixRange '#21#'
 	option PrefixMinNumberOfDigits '4'
@@ -262,7 +280,7 @@ config PrefixInfo '2PrefixInfo4'
 	option FacilityAction 'CFU_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo5'
+config PrefixInfo '3PrefixInfo5'
 	option Enable '1'
 	option PrefixRange '*67*(X+)#'
 	option PrefixMinNumberOfDigits '9'
@@ -272,7 +290,7 @@ config PrefixInfo '2PrefixInfo5'
 	option FacilityAction 'CFB_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo6'
+config PrefixInfo '3PrefixInfo6'
 	option Enable '1'
 	option PrefixRange '#67#'
 	option PrefixMinNumberOfDigits '4'
@@ -282,7 +300,7 @@ config PrefixInfo '2PrefixInfo6'
 	option FacilityAction 'CFB_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo7'
+config PrefixInfo '3PrefixInfo7'
 	option Enable '1'
 	option PrefixRange '*61*(X+(*X+)?)#'
 	option PrefixMinNumberOfDigits '15'
@@ -292,7 +310,7 @@ config PrefixInfo '2PrefixInfo7'
 	option FacilityAction 'CFNR_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo8'
+config PrefixInfo '3PrefixInfo8'
 	option Enable '1'
 	option PrefixRange '#61#'
 	option PrefixMinNumberOfDigits '4'
@@ -302,7 +320,7 @@ config PrefixInfo '2PrefixInfo8'
 	option FacilityAction 'CFNR_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo9'
+config PrefixInfo '3PrefixInfo9'
 	option Enable '1'
 	option PrefixRange '*31*'
 	option PrefixMinNumberOfDigits '4'
@@ -312,7 +330,7 @@ config PrefixInfo '2PrefixInfo9'
 	option FacilityAction 'CA_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '3PrefixInfo1'
+config PrefixInfo '4PrefixInfo1'
 	option Enable '1'
 	option PrefixRange '110|112'
 	option PrefixMinNumberOfDigits '7'

evoice/files/etc/evoice/voicecap

@@ -0,0 +1,38 @@
+# Capabilties are platform dependent. Keep these separated from customer configuration
+ 
+config capabilities_prm 'limits'
+	option MaxCallLogCount '100'
+
+config capabilities_prm 'features'
+	option QIModelsSupported 'G.107'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+	option BitRate '32000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.729'
+	option BitRate '8000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	

evoice/files/etc/evoice/voicedm

@@ -3,7 +3,6 @@ config account 'map_board'
    option HW_Has_Voice 'hw.board.hasVoice'
    option HW_Has_DECT 'hw.board.hasDect'
    option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
    option ProductID 'device.deviceinfo.ModelName'
    option I3_VERSION 'device.deviceinfo.SoftwareVersion'
    option SerialNumber 'device.deviceinfo.SerialNumber'
@@ -74,13 +73,6 @@ config codecs 'map_codec'
    option ptime 'voice.CodecProfile@.PacketizationPeriod'
    option dtx 'voice.CodecProfile@.SilenceSupression'
 
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
 config extensioninfo 'map_ext'
    option Enable 'voice.Extension@.Enable'
    option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'

evoice/files/etc/init.d/evoice

@@ -5,17 +5,10 @@ STOP=12
 
 USE_PROCD=1
 NAME=evoice
-VOICE_UCI_CONFIG=voice
 
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
 	procd_open_instance
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"
@@ -27,6 +20,3 @@ reload_service() {
 	start
 }
 
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711Mulaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711alaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=0ebaf1e7d1f09318ae75d0f475a25280742b790e
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2

gryphon-led-module/Makefile

@@ -44,25 +44,13 @@ MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	MODULES_SUBDIR:=lib/modules/4.19.183
 	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
 		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

icwmp/Config_cwmp.in

@@ -0,0 +1,30 @@
+choice
+       prompt "Select ACS sever"
+       default CWMP_ACS_MULTI
+       depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "Select HDM as ACS server"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options (deprecated)"
+	depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+	default n

icwmp/Makefile

@@ -1,28 +1,34 @@
 #
 # Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.0.5
+PKG_VERSION:=8.4.8
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=f590a3f64d9c0b80c3a41336e6fabbbff48868e5
+PKG_SOURCE_VERSION:=00d037ce851495aca6365f2189849c6030f305df
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/icwmp/default
   SECTION:=utils
@@ -32,6 +38,20 @@ define Package/icwmp/default
   DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
 endef
 
+define Package/icwmp/config
+	source "$(SOURCE)/Config_cwmp.in"
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+define Package/icwmp
+  $(Package/icwmp/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
 define Package/icwmp-openssl
   $(Package/icwmp/default)
   TITLE += (openssl)
@@ -57,15 +77,41 @@ define Package/icwmp-mbedtls
 endef
 
 ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+CONFIGURE_ARGS += --enable-libopenssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+TARGET_LDFLAGS += "-lssl"
 endif
 
 ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+CONFIGURE_ARGS += --enable-libwolfssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
+TARGET_LDFLAGS += "-lwolfssl"
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += --enable-libmbedtls
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+TARGET_LDFLAGS += "-lmbedtls"
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
 endif
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -82,22 +128,22 @@ define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/95-icwmp-generate-ssl $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
 	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
 endef
 
 Package/icwmp-openssl/install = $(Package/icwmp/default/install)
 Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
 Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
+$(eval $(call BuildPackage,icwmp))
 $(eval $(call BuildPackage,icwmp-openssl))
 $(eval $(call BuildPackage,icwmp-wolfssl))
 $(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -15,9 +15,7 @@ config acs 'acs'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
 	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
@@ -32,7 +30,7 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'

icwmp/files/etc/icwmpd/update.sh

@@ -1,27 +1,98 @@
 #!/bin/sh
-. /lib/functions.sh
 
 log() {
 	echo "$@" |logger -t cwmp.update -p info
 }
 
 handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
+	local defwan vendorspecinf update
+	local fallback_restart
 
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
+	fallback_restart="${1:-0}"
+	update="0"
+	defwan="$(uci -q get cwmp.cpe.default_wan_interface)"
+	vendorspecinf="$(ifstatus "${defwan}" | jsonfilter -e "@.data.vendorspecinf")"
 
-	status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
-	if [ "$status" != "running" ]; then
-		log "Trigger out of bound inform, since last inform status was failure"
-		ubus -t 10 call tr069 inform >/dev/null 2>&1
-		# Handle timeout or tr069 object not found
-		if [ "$?" -eq 7 ] || [ "$?" -eq 4 ]; then
-			log "Restarting icwmp tr069 object"
-			/etc/init.d/icwmpd restart
+	log "Handling dhcp option value [${vendorspecinf}]"
+	[ -n "$vendorspecinf" ] && {
+		local url old_url
+		local prov_code old_prov_code
+		local min_wait_interval old_min_wait_interval
+		local retry_interval_multiplier old_retry_interval_multiplier
+
+		old_url="$(uci -q get cwmp.acs.dhcp_url)"
+		old_prov_code="$(uci -q get cwmp.cpe.dhcp_provisioning_code)"
+		old_min_wait_interval="$(uci -q get cwmp.acs.dhcp_retry_min_wait_interval)"
+		old_retry_interval_multiplier="$(uci -q get cwmp.acs.dhcp_retry_interval_multiplier)"
+
+		case $vendorspecinf in
+			http://*|https://*)
+					url="${vendorspecinf}"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                2=*)
+				                        prov_code="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                3=*)
+				                        min_wait_interval="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                4=*)
+				                        retry_interval_multiplier="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+
+		if [ -n "$url" ]; then
+			if [ "${url}" != "${old_url}" ]; then
+				log "## icwmp url[${old_url}] changed to [${url}]"
+				uci -q set cwmp.acs.dhcp_url="$url"
+				update=1
+			fi
+		fi
+		if [ -n "$prov_code" ]; then
+			if [ "${prov_code}" != "${old_prov_code}" ]; then
+				log "## icwmp prov_code[${old_prov_code}] changed to [${prov_code}]"
+				uci -q set cwmp.cpe.dhcp_provisioning_code="$prov_code"
+				update=1
+			fi
+		fi
+		if [ -n "$min_wait_interval" ]; then
+			if [ "${min_wait_interval}" != "${old_min_wait_interval}" ]; then
+				log "## icwmp min_wait_interval[${old_min_wait_interval}] changed to [${min_wait_interval}]"
+				uci -q set cwmp.acs.dhcp_retry_min_wait_interval="$min_wait_interval"
+				update=1
+			fi
+		fi
+		if [ -n "$retry_interval_multiplier" ]; then
+			if [ "${retry_interval_multiplier}" != "${old_retry_interval_multiplier}" ]; then
+				log "## icwmp retry_interval_multiplier[${old_retry_interval_multiplier}] changed to [${retry_interval_multiplier}]"
+				uci -q set cwmp.acs.dhcp_retry_interval_multiplier="$retry_interval_multiplier"
+				update=1
+			fi
+		fi
+	}
+
+	# In case of update restart icwmp
+	if [ "${update}" -eq "1" ]; then
+		log "CWMP uci changes, reload cwmp with uci commit"
+		ubus call uci commit '{"config":"cwmp"}'
+	else
+		status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
+		if [ "$status" = "failure" ]; then
+			log "Trigger out of bound inform, since last inform status was failure"
+			ubus -t 10 call tr069 inform >/dev/null 2>&1
+			# Handle timeout
+			if [ "$?" -eq 7 ]; then
+				log "Restarting icwmp tr069 object"
+				/etc/init.d/icwmpd restart
+			fi
 		fi
 	fi
 }

icwmp/files/etc/init.d/icwmpd

@@ -15,34 +15,6 @@ log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
-
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
-
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-}
-
 enable_dhcp_option43() {
 	local wan="${1}"
 
@@ -71,206 +43,6 @@ enable_dhcp_option43() {
 	fi
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
-
-	echo "${val}"
-}
-
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
-
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
-
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ ${class_len} -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ ${class_len} -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network.$intf.sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
-				break
-			fi
-		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-enable_disable_dhcp_option125() {
-	local wan="${1}"
-	local action="${2}"
-
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local sendopts="$(uci -q get network.$wan.sendopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" == "dhcp" ]; then
-		if [ "${action}" == "enable" ]; then
-			if [ ${req125_present} -eq 0 ]; then
-				newreqopts="$reqopts 125"
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 0 ]; then
-				configure_send_op125 "${sendopts}" "${wan}" "network"
-				network_uci_update=1
-			fi
-		else
-			if [ ${req125_present} -eq 1 ]; then
-				newreqopts=$(echo ${reqopts/125/})
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 1 ]; then
-				for sopt in $sendopts; do
-					if [[ "$sopt" == "$opt125"* ]]; then
-						newsendopts=$(echo ${sendopts/"${sopt}"/})
-						uci -q set network.$wan.sendopts="$newreqopts"
-						network_uci_update=1
-						break
-					fi
-				done
-			fi
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
-	fi
-}
-
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -373,16 +145,18 @@ validate_defaults() {
 		return 1;
 	}
 
-	ssl_capath="${ssl_capath%/}"
 	# Put the cert pem file in keep list
 	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
+		if ! grep "${ssl_capath}" /lib/upgrade/keep.d/icwmp; then
 			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
 		fi
 	fi
 
+	[ -z "${url}" ] && [ -z "${dhcp_url}" ] && {
+		log "ACS url is empty can't start"
+		return 1;
+	}
+
 	validate_cpe_section || {
 		log "Validation of cpe section failed"
 		return 1;
@@ -391,51 +165,39 @@ validate_defaults() {
 	return 0;
 }
 
-boot() {
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get dhcp_discovery acs dhcp_discovery "0"
-
-	config_get wan_interface cpe default_wan_interface "wan"
-	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_disable_dhcp_option125 "${wan_interface}" "enable"
-		enable_dnsmasq_option125 "${lan_interface}"
-	else
-		# Remove dhcp option 125 if exists
-		enable_disable_dhcp_option125 "${wan_interface}" "disable"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	start
-}
-
 start_service() {
 	local enable_cwmp
+	local wan_interface
+	local dhcp_discovery
+	local dhcp_url
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get dhcp_url acs dhcp_url ''
+	config_get wan_interface cpe default_wan_interface "wan"
 
-	if [ "$enable_cwmp" = "0" ]; then
+	if [ "$enable_cwmp" = "0" ] || [ "$enable_cwmp" = "false" ]; then
+		log "CWMP is not enabled"
 		return 0
 	fi
 
+	# Set dhcp option 43 if dhcp discovery enabled
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		enable_dhcp_option43 "${wan_interface}"
+	fi
+
 	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
 	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
 	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
 
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		if [ -z "${dhcp_url}" ]; then
+			log "Empty dhcp url, running update script"
+			/etc/icwmpd/update.sh
+		fi
+	fi
+
 	validate_defaults || {
 		log "Validation of defaults failed"
 		return 1;
@@ -461,26 +223,9 @@ service_stopped()
 }
 
 reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	status="$(ubus -t 1 call tr069 status |jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
+	log "Reloading CWMP client"
+	ubus -t 1 call tr069 command '{"command":"reload"}'
+	if [ "$?" -ne "0" ]; then
 		log "Restarting CWMP client"
 		stop
 		start
@@ -497,6 +242,7 @@ service_triggers() {
                                json_add_array
                                        json_add_string "" "run_script"
                                        json_add_string "" "/etc/icwmpd/update.sh"
+                                       json_add_string "" "1"
                                json_close_array
                        json_close_array
                        json_add_int "" "2000"

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,11 +1,7 @@
-#!/bin/sh
-
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
 # Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
+oui=$(uci -q get cwmp.cpe.manufacturer_oui)
 if [ -z "${oui}" ]; then
 	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
 fi
@@ -13,29 +9,24 @@ fi
 oui=$(echo "${oui}" | tr 'a-f' 'A-F')
 
 # Get system serial number.
-config_get serial cpe serial_number ""
+serial=$(uci -q get cwmp.cpe.serial_number)
 if [ -z "${serial}" ]; then
 	serial=$(db -q get device.deviceinfo.SerialNumber)
 fi
 
 # Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
 
 # Only set if they are empty
-if [ -z "${acs_userid}" ]; then
+if [ -z "$acs_userid" ]
+then
     uci -q set cwmp.acs.userid="${oui}-${serial}"
 fi
 
-if [ -z "${cpe_userid}" ]; then
+if [ -z "$cpe_userid" ]
+then
     uci -q set cwmp.cpe.userid="${oui}-${serial}"
 fi
 
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
-fi
-
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/95-icwmp-generate-ssl

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+regenerate_ssl_link_path()
+{
+        local cert_dir all_file rehash
+
+        cert_dir="${1}"
+
+        all_file=$(ls $cert_dir/*.pem 2>/dev/null)
+
+        [ ! -d "${cert_dir}" ] && return 0;
+        [ ! -f "${all_file}" ] && return 0;
+
+        for cfile in $all_file
+        do
+		rehash="$(openssl x509 -hash -noout -in $cfile)"
+		[ -f ${cert_dir}/${rehash}.0 ] || \
+			ln -s $cfile $cert_dir/${rehash}.0
+        done
+}
+
+regenerate_ssl_link()
+{
+        local cwmp_ca_path
+
+        regenerate_ssl_link_path "/etc/ssl/certs"
+
+        cwmp_ca_path=$(uci -q get cwmp.acs.ssl_capath)
+        if [[ "${cwmp_ca_path}" != "/etc/ssl/certs"* ]]; then
+                if [ -n "${cwmp_ca_path}" ]; then
+                        regenerate_ssl_link_path "${cwmp_ca_path}"
+                fi
+        fi
+}
+
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
 /var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=4.10.7
+PKG_VERSION:=4.9.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b50f79061a95840d89a6129aa0a95aff82b5a1b7
+PKG_SOURCE_VERSION:=69b27e3e1509b9192c529fbba6a329cc0532cfbb
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -70,7 +70,6 @@ define Package/libieee1905/description
 endef
 
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE

ieee1905/files/etc/config/ieee1905

@@ -2,7 +2,7 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	option registrar '2 5 6'
+	option registrar '2 5'
 #	option macaddress '0a:1b:2c:3d:4e:50'
 
 config al-iface
@@ -24,9 +24,3 @@ config ap
 	option encryption 'sae-mixed'
 	option key '1234567890'
 
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-

ieee1905/files/etc/init.d/ieee1905

@@ -42,7 +42,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
+			'band:or("2", "5", "60")' \
 			'ssid:string' \
 			'encryption:or("psk2", "sae-mixed", "sae", string)' \
 			'key:string' \

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.2.2
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/config

@@ -50,8 +50,6 @@ CONFIG_PACKAGE_wifimngr=y
 
 # Multi-AP #
 CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-agent=m
-CONFIG_PACKAGE_map-controller=m
 CONFIG_PACKAGE_map-topology=y
 CONFIG_PACKAGE_wfadatad-collector=y
 
@@ -117,8 +115,7 @@ CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_atftp=m
 CONFIG_PACKAGE_atftpd=m
 CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_dnsmasq=y
-CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
 CONFIG_PACKAGE_nginx=y
@@ -136,11 +133,10 @@ CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
 CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_ip-bridge=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables-legacy=y
+CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
@@ -165,7 +161,6 @@ CONFIG_PACKAGE_lscpu=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_procd-ujail=m
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rpcd-mod-rrdns=y
@@ -289,10 +284,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-
-# Use fw3 iptables-based instead of newer nftables-based fw4
-# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
-# Enabling luci-app-firewall enables fw4
-# CONFIG_PACKAGE_luci-app-firewall is not set
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set

iop/scripts/feeds_update.sh

@@ -2,65 +2,57 @@
 
 function feeds_update {
 
-	developer=0
-	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
-		case $opt in
-		n)
-			override=0
-			;;
-		esac
-	done
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
-	fi
+    cp .config .genconfig_config_bak
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
 	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-	fi
+    fi
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
+    # targets need to be installed explicitly
+    for target in $(ls ./feeds/targets)
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# Workaround for bug in 22.03.0-rc4 where installed target path has been
-	# moved to target/linux/feeds but Config.in and Makefile from installed
-	# targets are not properly included from the new location.
-	# This hack is to be removed once the issues are fixed.
-	# Note that the above block of code might no longer necessary because
-	# targets no longer need to be installed explicitly.
-	echo "Working around installed-target-bug"
-	for f in target/linux/feeds/*; do
-		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
-	done
+    # install all packages
+    ./scripts/feeds install -a
 
-	# install all packages
-	./scripts/feeds install -a
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	cp .genconfig_config_bak .config
-	make defconfig
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap
-
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -13,12 +13,11 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
-	ramips="target/linux/feeds/iopsys-ramips"
-	econet="target/linux/feeds/iopsys-econet"
-	x86="target/linux/feeds/iopsys-x86"
-	armvirt="target/linux/feeds/iopsys-armvirt"
-	mediatek="target/linux/feeds/iopsys-mediatek"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -84,8 +83,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -118,11 +117,9 @@ function genconfig {
 			iopsys_x86=$(cd $x86; ./genconfig)
 		[ -e $armvirt/genconfig ] &&
 			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -170,14 +167,6 @@ function genconfig {
 		    return
 		fi
 	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -330,25 +319,19 @@ function genconfig {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES 
-		case "$target" in
-		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 

iop/scripts/genconfig_min.sh

@@ -12,12 +12,11 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcm63xx_arm="target/linux/feeds/iopsys-brcm63xx-arm"
-	ramips="target/linux/feeds/iopsys-ramips"
-	econet="target/linux/feeds/iopsys-econet"
-	x86="target/linux/feeds/iopsys-x86"
-	armvirt="target/linux/feeds/iopsys-armvirt"
-	mediatek="target/linux/feeds/iopsys-mediatek"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -83,8 +82,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -117,11 +116,9 @@ function genconfig_min {
 			iopsys_x86=$(cd $x86; ./genconfig)
 		[ -e $armvirt/genconfig ] &&
 			iopsys_armvirt=$(cd $armvirt; ./genconfig)
-		[ -e $mediatek/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt iopsys_mediatek; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -169,14 +166,6 @@ function genconfig_min {
 		    return
 		fi
 	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek/config"
-		    return
-		fi
-	    done
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -321,25 +310,19 @@ function genconfig_min {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		iopsys_ramips | iopsys_econet | iopsys_mediatek | iopsys_brcm63xx_arm)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 

iop/scripts/iopupgrade.sh

@@ -1,282 +1,344 @@
 # this is a developer helper script to install firmware on a remote host with SSH
 
 function upd_usage {
-	echo "usage: $0 ssh_upgrade [-t <host>] [-f <file>] [opts] "
-	echo ""
-	echo "   Default host is 192.168.1.1"
-	echo "   Default firmware file is the latest one (last.{itb,pkgtb})"
-	echo "   Default is to not keep configuration"
-	echo "opts:"
-	echo ""
-	echo "	-i	Interactive use, allows to select firmware file"
-	echo "	-n	Do not do the final reboot of the target board"
-	echo "	-c	Keep configuration"
-	echo "	-x	Force install even if firmware is not for this board"
-	echo "	-b	Force install of bootloader regardless of version installed"
+    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
+    echo ""
+    echo "   Default host is 192.168.1.1"
+    echo "   Default firmware file is the newest one found"
+    echo "   Default is to not keep configuration"
+    echo "opts:"
+    echo ""
+    echo "	-i	Interactive use, Allows to select firmware file"
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
 }
 
 function set_config_string {
-	eval $(grep $1 .config)
+    eval `grep $1 .config`
 }
 
 function upd_ask_ok {
-	echo "Will continue with the following settings:"
-	echo "-----------------------------------------"
-	printf "%20s: %s\n" "Firmware file" "$upd_fw_base"
-	printf "%20s: %s\n" "Host IP" "$upd_host"
-	printf "%20s: " "Reboot"
-	if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Keep config"
-	if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force bootloader"
-	if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force image upgrade"
-	if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	echo "-----------------------------------------"
+    echo "Will Continue with the following settings"
+    echo "-----------------------------------------"
+    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
+    printf "%20s: %s\n"  "Host ip" "$upd_host"
+    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    echo "-----------------------------------------"
 
-	echo -n "Continue? [Y/n/q]:"
-	read answer
+    if [ "$upd_sysupgrade" == "0" ]
+       then
+	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
+    fi
 
-	case $answer in
-	n | N)
-		return 1
-		;;
-	q | Q)
-		exit 1
-		;;
-	y | Y | *)
-		return 0
-		;;
-	esac
+    echo -n "Continue? [Y/n/q]:"
+    read answer
+
+    case $answer in
+	n|N)
+	    return 1;;
+	q|Q)
+	    exit 1;;
+	y|Y|*)
+	    return 0;;
+    esac
 }
 
 function upd_select_file {
-	dialog --keep-tite --title "To select a file, use TAB/ARROW to highlight then press SPACEBAR -> RETURN" \
-		--fselect "${upd_fw:-bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/}" \
-		$((lines - 10)) $((cols - 5)) \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_fw="$new_file"
-		upd_fw_base=$(basename $upd_fw)
-	fi
+    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
+	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
+	   $((lines -10)) $((cols -5)) \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_fw="$new_file"
+	upd_fw_base=$(basename $upd_fw);
+    fi
 }
 
 function upd_select_target {
-	dialog --keep-tite --title "Input the hostname/IP of the target board" \
-		--inputbox "Name/IP" \
-		$((lines - 10)) $((cols - 5)) \
-		"$upd_host" \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_host="$new_file"
-	fi
+    dialog --keep-tite --title "Input the name/ip number of target board" \
+	   --inputbox "Name/IP" \
+	   $((lines -10)) $((cols -5)) \
+	   "$upd_host" \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_host="$new_file"
+    fi
 }
 
-function upd_select_reboot {
-	dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Reboot" "Restart board after done" $(if [ "$upd_noreboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		"No reboot" "Continue running old system" $(if [ "$upd_noreboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+function upd_select_reboot {
+    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
 	"No reboot")
-		upd_noreboot=1
-		;;
+	    upd_noreboot=1
+	;;
 	"Reboot")
-		upd_noreboot=0
-		;;
-	esac
+	    upd_noreboot=0
+	    ;;
+    esac
 }
 
 function upd_select_config {
-	dialog --keep-tite --radiolist "Should the configuration be kept" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Keep" "Keep the config from old system" $(if [ "$upd_keepconf" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Default" "Use default config for new system" $(if [ "$upd_keepconf" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the configuration be keept" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Keep")
-		upd_keepconf=1
-		;;
+	    upd_keepconf=1
+	    ;;
 	"Default")
-		upd_keepconf=0
-		;;
-	esac
+	    upd_keepconf=0
+	    ;;
+    esac
 }
 
 function upd_select_forceboot {
-	dialog --keep-tite --radiolist "Should the boot loader be updated regardless of the version installed" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Always update boot loader" $(if [ "$upd_forceboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Version check" "Only upgrade if version is newer" $(if [ "$upd_forceboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceboot=1
-		;;
+	    upd_forceboot=1
+	    ;;
 	"Version check")
-		upd_forceboot=0
-		;;
-	esac
+	    upd_forceboot=0
+	    ;;
+    esac
 }
 
 function upd_select_forceimage {
-	dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Disable sanity check and force use of image (dangerous)" $(if [ "$upd_forceimage" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Only compatible" "Normal checks apply" $(if [ "$upd_forceimage" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceimage=1
-		;;
+	    upd_forceimage=1
+	    ;;
 	"Only compatible")
-		upd_forceimage=0
-		;;
-	esac
+	    upd_forceimage=0
+	    ;;
+    esac
+}
+
+function upd_select_sysupgrade {
+    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
+	"iopu")
+	    upd_sysupgrade=0
+	    ;;
+	"sysupgrade")
+	    upd_sysupgrade=1
+	    ;;
+    esac
 }
 
 function upd_select {
-	dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select item to change" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Firmware file" "$upd_fw_base" \
-		"Host IP" "$upd_host" \
-		"Reboot" $(if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Keep config" $(if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force bootloader" $(if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force image upgrade" $(if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		2>$tempfile
 
-	case $(cat $tempfile) in
-	"Firmware file")
-		upd_select_file
-		;;
-	"Host IP")
-		upd_select_target
-		;;
+    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Firmare file" "$upd_fw_base"\
+	   "Host ip" "$upd_host" \
+	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   2> $tempfile
+
+
+    case $(cat $tempfile) in
+	"Firmare file")
+	    upd_select_file
+	    ;;
+	"Host ip")
+	    upd_select_target
+	    ;;
 	"Reboot")
-		upd_select_reboot
-		;;
+	    upd_select_reboot
+	    ;;
 	"Keep config")
-		upd_select_config
-		;;
+	    upd_select_config
+	    ;;
 	"Force bootloader")
-		upd_select_forceboot
-		;;
+	    upd_select_forceboot
+	    ;;
 	"Force image upgrade")
-		upd_select_forceimage
-		;;
+	    upd_select_forceimage
+	    ;;
+	"sysupgrade")
+	    upd_select_sysupgrade
+	    ;;
 	*)
-		return
-		;;
-	esac
-	upd_select
+	    return
+	;;
+    esac
+    upd_select
 }
 function upd_select_start {
-	lines=$(tput lines)
-	cols=$(tput cols)
-	tempfile="$(mktemp)"
-	trap "rm -f $tempfile" 0 1 2 5 15
-	upd_select
+    lines=$(tput lines)
+    cols=$(tput cols)
+    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
+    trap "rm -f $tempfile" 0 1 2 5 15
+    upd_select
 
 }
 
 function ssh_upgrade {
-	upd_noreboot=0
-	upd_forceboot=0
-	upd_keepconf=0
-	upd_forceimage=0
-	upd_fw_base=""
-	upd_fw=""
-	upd_host="192.168.1.1"
-	do_dialog=0
+    upd_noreboot=0
+    upd_forceboot=0
+    upd_keepconf=0
+    upd_forceimage=0
+    upd_fw_base=""
+    upd_fw=""
+    upd_host="192.168.1.1"
+    upd_sysupgrade=1
+    do_dialog=0
 
-	while getopts "f:hnxt:icb" opt; do
-		case $opt in
-		n)
-			upd_noreboot=1
-			;;
-		x)
-			upd_forceimage=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		c)
-			upd_keepconf=1
-			;;
-		v)
-			verbose=$OPTARG
-			;;
-		f)
-			upd_fw=$OPTARG
-			;;
-		t)
-			upd_host=$OPTARG
-			;;
-		i)
-			do_dialog=1
-			;;
-		h)
-			upd_usage
-			exit 1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-		esac
-	done
-
-	if [ -z "$upd_fw" ]; then
-		set_config_string CONFIG_TARGET_BOARD
-		set_config_string CONFIG_TARGET_SUBTARGET
-		upd_fw="$(realpath -q --canonicalize-existing --relative-to=. "bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/"last.{pkgtb,itb})"
-		if [ -z "$upd_fw" ] && [ $do_dialog -eq 0 ]; then
-			echo "Could not find image. Check that last.{itb,pkgtb} exists or specify an image using -f <image> or -i (interactive)." >&2
-			return 1
-		fi
-	fi
-	upd_fw_base="$(basename "$upd_fw")"
-
-	[ $do_dialog -eq 1 ] && upd_select_start
-
-	if ! upd_ask_ok; then
-		upd_select_start
-		if ! upd_ask_ok; then
-			exit 1
-		fi
-	fi
-
-	if [ ! -f $upd_fw ]; then
-		echo "Firmware file $firmware does not exist."
+    while getopts "f:hnxt:iscb" opt; do
+	case $opt in
+	    n)
+		upd_noreboot=1
+		;;
+	    x)
+		upd_forceimage=1
+		;;
+	    b)
+		upd_forceboot=1
+		;;
+	    c)
+		upd_keepconf=1
+		;;
+	    v)
+		verbose=$OPTARG
+		;;
+	    f)
+		upd_fw=$OPTARG
+		;;
+	    t)
+		upd_host=$OPTARG
+		;;
+	    i)
+		do_dialog=1
+		;;
+	    s)
+		upd_sysupgrade=1
+		;;
+	    h)
+		upd_usage
 		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -n "$upd_fw" ]
+    then
+	upd_fw_base=$(basename $upd_fw);
+    else
+	set_config_string CONFIG_TARGET_BOARD
+	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
+
+	# if target uses pkgtb
+	if [ -z "$firmwares"]
+	then
+	    # pkgtb files can not be streamed so copy over the file witch scp
+	    use_scp=1
+	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
 	fi
 
-	extra_args=""
-	[ $upd_noreboot -eq 1 ] && extra_args="$extra_args --no-reboot"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args --force"
-	[ $upd_keepconf -eq 0 ] && extra_args="$extra_args -n"
-	[ $upd_forceboot -eq 1 ] && extra_args="$extra_args --force-loader-upgrade"
+	for upd_fw_base in $firmwares
+	do
+	    #echo "firmware $upd_fw"
+	    break
+	done
+	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
+    fi
 
-	pv "$upd_fw" |
-		ssh \
-			-o ConnectTimeout=60 \
-			root@"$upd_host" \
-			sh -c "cat > '/tmp/$upd_fw_base' && (set -x && sysupgrade -v $extra_args /tmp/$upd_fw_base)" ||
-		echo "Sysupgrade failed" >&2 && return 1
+    [ $do_dialog -eq 1 ] && upd_select_start
+
+    if ! upd_ask_ok
+    then
+	upd_select_start
+	if ! upd_ask_ok
+	then
+	    exit 1
+	fi
+    fi
+
+    if [ ! -f $upd_fw ]
+    then
+	echo "firmware file $firmware do not exist"
+	exit 1
+    fi
+
+    if [ $upd_sysupgrade -eq 0 ]
+    then
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
+	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
+	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
+
+	file_size_kb=`du -k "$upd_fw" | cut -f1`
+	if [ "$use_scp" == "1" ]
+	then
+	    scp $upd_fw root@$upd_host:/tmp/ &&
+		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
+	else
+	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
+	fi
+    else
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
+	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
+
+	scp $upd_fw root@$upd_host:/tmp/ &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    echo "sysupgrade done!"
+    fi
 }
 
 register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
+
+

libmicroxml/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libmicroxml
+PKG_VERSION:=2012-06-11
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mirror/microxml.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_LICENSE:=LGPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libmicroxml
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=XML library
+  MAINTAINER:=Luka Perkov <luka@openwrt.org>
+endef
+
+define Package/libmicroxml/description
+ A micro sized XML library
+endef
+
+CONFIGURE_ARGS += \
+	--disable-threads \
+	--enable-static \
+	--enable-shared
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
+endef
+
+define Package/libmicroxml/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -0,0 +1,130 @@
+diff --git a/mxml-file.c b/mxml-file.c
+index 02eca9d..f10d202 100644
+--- a/mxml-file.c
++++ b/mxml-file.c
+@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
+   * Write the node...
+   */
+ 
+-  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
++  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
++    global_free(global);
+     return (-1);
+-
++  }
++  
++  global_free(global);
+   if (col > 0)
+     if (putc('\n', fp) < 0)
+       return (-1);
+@@ -1448,6 +1451,7 @@ mxml_load_data(
+   if ((buffer = malloc(64)) == NULL)
+   {
+     mxml_error("Unable to allocate string buffer!");
++    global_free(global);
+     return (NULL);
+   }
+ 
+@@ -2083,11 +2087,12 @@ mxml_load_data(
+ 		 node->parent ? node->parent->value.element.name : "(null)");
+ 
+       mxmlDelete(first);
+-
++      global_free(global);
+       return (NULL);
+     }
+   }
+ 
++  global_free(global);
+   if (parent)
+     return (parent);
+   else
+@@ -2102,7 +2107,7 @@ error:
+   mxmlDelete(first);
+ 
+   free(buffer);
+-
++  global_free(global);
+   return (NULL);
+ }
+ 
+diff --git a/mxml-private.c b/mxml-private.c
+index 4378ca3..ea6e452 100644
+--- a/mxml-private.c
++++ b/mxml-private.c
+@@ -41,6 +41,32 @@
+  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
+  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
+  */
++void *global_mem[16] = {0};
++
++static void *global_calloc(int x, int size)
++{
++  int i;
++  void *m = calloc(x, size);
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
++    global_mem[i] = global_mem[i-1];
++  }
++  global_mem[0] = m;
++  return m;
++}
++
++void global_free(void *m)
++{
++  int i;
++  if (m == NULL)
++    return;
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
++    if (global_mem[i] == m) {
++      global_mem[i] = NULL;
++      free(m);
++      break;
++    }
++  }
++}
+ 
+ #if defined(__sun) || defined(_AIX)
+ #  pragma fini(_mxml_fini)
+@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
+   return (MXML_REAL);
+ }
+ 
+-
+ #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
+ #  include <pthread.h>
+ 
+@@ -190,7 +215,6 @@ _MXML_FINI(void)
+   }
+ }
+ 
+-
+ /*
+  * '_mxml_global()' - Get global data.
+  */
+@@ -205,7 +229,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+     pthread_setspecific(_mxml_key, global);
+ 
+     global->num_entity_cbs = 1;
+@@ -288,7 +312,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+ 
+     global->num_entity_cbs = 1;
+     global->entity_cbs[0]  = _mxml_entity_cb;
+diff --git a/mxml-private.h b/mxml-private.h
+index c591208..72ed338 100644
+--- a/mxml-private.h
++++ b/mxml-private.h
+@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
+ extern _mxml_global_t	*_mxml_global(void);
+ extern int		_mxml_entity_cb(const char *name);
+ 
++extern void global_free(void *m);

map-agent/Config.in

@@ -13,22 +13,5 @@ config AGENT_ISLAND_PREVENTION
 config AGENT_EASYMESH_R2_CERT
 	bool "Compile for WFA test bed"
 
-
-config AGENT_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through AGENT_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-agent/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-21 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.10.3.16
+PKG_VERSION:=7.2.1
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=298b7ceef779a658b88f78e15f65883e5012273c
+PKG_SOURCE_VERSION:=b3e3a21c9a938ce719a0ea609c965852586d6778
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
@@ -56,7 +56,6 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-Wno-error=deprecated-declarations \
 	-D_GNU_SOURCE
 
 ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
@@ -71,11 +70,6 @@ ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
 TARGET_CFLAGS += -DEASYMESH_R2_CERT
 endif
 
-ifeq ($(CONFIG_AGENT_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_AGENT_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 MAKE_PATH:=src
 
 define Package/map-agent/install
@@ -83,8 +77,6 @@ define Package/map-agent/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/script/* $(1)/lib/wifi/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef
 

map-agent/files/etc/config/mapagent

@@ -10,7 +10,6 @@ config agent 'agent'
 
 config dynamic_backhaul
 	option missing_bh_timer '60'
-	option missing_bh_reconfig_timer '1800'
 
 config controller_select
 	option id 'auto'

map-agent/files/etc/init.d/mapagent

@@ -80,8 +80,7 @@ validate_agent_section() {
 		'vlan_segregation:bool:false' \
 		'resend_num:uinteger:0' \
 		'dyn_cntlr_sync:bool:true' \
-		'island_prevention:bool:false' \
-		'eth_onboards_wifi_bhs:bool:false'
+		'island_prevention:bool:true'
 
 
 	[ "$?" -ne 0 ] && {
@@ -116,7 +115,7 @@ validate_ap_section() {
 	uci_validate_section mapagent $section "${1}" \
 			'ifname:string' \
 			'device:string' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'enabled:bool:true' \
 			'onboarded:bool:false' \
 			'ssid:string' \
@@ -149,8 +148,7 @@ validate_radio_section() {
 			'include_sta_stats:bool:false' \
 			'include_sta_metric:bool:false' \
 			'rcpi_hysteresis_margin:range(0,255)' \
-			'report_util_threshold:range(0,255)' \
-			'encryption:or("sae", "psk2", "sae-mixed")'
+			'report_util_threshold:range(0,255)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of radio section failed"
@@ -187,8 +185,6 @@ validate_dyn_bh_section() {
 
 	uci_validate_section mapagent $section "${1}" \
 			'missing_bh_timer:range(1,255)'
-	uci_validate_section mapagent $section "${1}" \
-			'missing_bh_reconfig_timer:range(0,65535)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of dynamic backhaul section failed"
@@ -215,10 +211,6 @@ validate_agent_config() {
 	return 0
 }
 
-create_dir() {
-        mkdir -p /var/run/multiap
-}
-
 start_service() {
 	[ -f /usr/sbin/dynbhd ] && start_dynbhd_service
 
@@ -238,7 +230,6 @@ start_service() {
 	[ "$ts" -eq 1 ] && create_map #|| remove_map
 
 	procd_open_instance
-	create_dir
 	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1

map-agent/files/etc/uci-defaults/991-map-agent-unset-pvid

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset_pvid() {
-	local section=$1
-
-	uci -q set mapagent.${section}.pvid="0"
-}
-
-config_load mapagent
-
-config_foreach unset_pvid policy

map-agent/files/lib/wifi/multiap

@@ -0,0 +1,849 @@
+#!/bin/sh
+
+# functions
+# wireless_teardown - tear down ifaces based on mapagent config
+# setup_network     - prepare /etc/config/network if necessary
+# setup_wireless    - prepare /etc/config/wireless based on mapagent config
+# write_credentials - write bBSS credentials to fBSS
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+. /lib/wifi/traffic_separation
+
+MAPFILE="/tmp/multiap.backhaul"
+
+diff=0
+onbrd_bssid=0
+onbrd_band=0
+
+usage() {
+	cat <<EOF
+Usage: $0 [wireless_teardown|setup_network|setup_wireless|write_credentials]
+Platform specific Multi-AP script to prepare network and wifi subsystem based on
+mapagent configuration.
+wireless_teardown - tear down ifaces in /etc/config/wireless
+setup_network     - prepare /etc/config/network
+setup_wireless    - prepare /etc/config/wireless
+write_credentials - write bBSS credentials to fBSS
+EOF
+	exit 1
+}
+
+
+type_to_multi_ap () {
+	type="$1"
+
+	if [ "$type" = "backhaul" ]; then
+		echo "1"
+		return
+	elif [ "$type" = "fronthaul" ]; then
+		echo "2"
+		return
+	elif [ "$type" = "combined" ]; then
+		echo "3"
+		return
+	fi
+
+	echo "0"
+}
+
+get_type_by_section() {
+	section="$1"
+
+	config_get type $section type "0"
+
+	echo "$(type_to_multi_ap $type)"
+}
+
+sync_credentials() {
+	bands=""
+	json_init
+	mapagent_process_fh() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		[ "$dev" != "$device" ] && return
+
+		config_get band $section band
+		config_get ssid $section ssid
+		config_get encryption $section encryption
+		config_get key $section key
+
+		section=$(uci add ieee1905 ap)
+		[ "$section" == "" ] && return
+
+		uci -q set ieee1905.${section}.band=$band
+		uci -q set ieee1905.${section}.ssid="$ssid"
+		uci -q set ieee1905.${section}.encryption=$encryption
+		uci -q set ieee1905.${section}.key="$key"
+		json_select "$band" > /dev/null
+		if [ "$?" = "0" ]; then
+			json_get_keys keys
+
+			for key in ${keys};
+			do
+				json_get_var val "$key"
+				uci -q set ieee1905.${section}.$key="$val"
+			done
+			json_select ..
+		fi
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+		config_get band $section band
+		config_get dedicated_backhaul $section dedicated_backhaul 0
+
+		[ "$dedicated_backhaul" != "0" ] && return
+
+		for b in $bands; do
+			if [ "$b" == "$band" ]; then
+				return
+			fi
+		done
+
+		config_foreach mapagent_process_fh ap $device
+		bands="$bands $band"
+	}
+
+	ieee1905_del_ap() {
+		append_value() {
+			local section=$1
+			local key=$2
+			shift
+			shift
+
+			while [ "$key" != "" ]; do
+				val=$(uci -q get ieee1905.$section.$key)
+				[ "$val" = "" ] && {
+					key=$1
+					shift
+					continue
+				}
+				json_add_string "$key" ${val}
+				key=$1
+				shift
+			done
+		}
+
+		local section=$1
+		local band
+
+		config_get band $section band
+		json_select "$band" > /dev/null
+		rc=$?
+		[ "$rc" != "0" ] && json_add_object "$band"
+		append_value $section "manufacturer" "model_name" "device_name" "model_number" "serial_number" "device_type" "os_version"
+		if [ "$rc" != "0" ]; then
+			json_close_object
+		else
+			json_select ..
+		fi
+
+		uci -q delete ieee1905.${section}
+	}
+
+	config_load ieee1905
+	config_foreach ieee1905_del_ap ap
+
+	config_load mapagent
+	config_foreach mapagent_process_radio radio
+
+	uci commit ieee1905
+	json_cleanup
+}
+
+write_credentials() {
+	config_load mapagent
+
+	mapagent_apply_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+			local bk_ssid="$3"
+			local bk_key="$4"
+
+			config_get ifname $section ifname
+
+			#echo found device=$device map=$multi_ap ifname=$ifname mapifname=$map_ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+			uci -q set wireless.${section}.multi_ap_backhaul_ssid="$bk_ssid"
+			uci -q set wireless.${section}.multi_ap_backhaul_key="$bk_key"
+		}
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface "$1" "$2" "$3"
+	}
+
+	mapagent_find_fbss() {
+		local section=$1
+		local dev=$2
+		local bk_ssid="$3"
+		local bk_key="$4"
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "2" ] && return
+
+		config_get ifname $section ifname
+
+		#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+		# subshell in hopes to maintain mapagent config loaded
+		echo $(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key") 2> /dev/null
+	}
+
+	mapagent_find_bbss() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+		config_get enabled $section enabled "1"
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$enabled" == "0" ] && return
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "1" ] && return
+
+		config_get ssid $1 ssid
+		config_get key $1 key
+
+		#echo found ssid="$ssid" key="$key"
+
+		config_foreach mapagent_find_fbss ap $dev "$ssid" "$key"
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+
+		#echo found dev=$dev
+
+		config_foreach mapagent_find_bbss ap $device
+	}
+
+
+	config_foreach mapagent_process_radio radio
+
+	uci commit wireless
+}
+
+set_network() {
+	local ifname=$1
+	local num=$2
+	local bssid=$3
+
+	wpa_cli -i $ifname set_n $num bssid $bssid
+}
+
+bsta_steer() {
+	local ifname=$1
+	local bssid=$2
+
+	rc=$(wpa_cli -i $ifname set_n 0 bssid $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+
+	rc=$(wpa_cli -i $ifname roam $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+}
+
+write_bsta_config() {
+	local ifname=$1
+
+	#echo diff = $diff > /dev/console
+
+
+	config_load mapagent
+
+	mapagent_apply_wl_bsta() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+			local bssid=$3
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			#echo setting diff = $diff > /dev/console
+			old_bssid="$(uci -q get wireless.${section}.bssid)"
+
+			[ "$old_bssid" == "$bssid" ] && break
+
+			uci -q set wireless.${section}.bssid=$bssid
+			wpa_cli -i "$bsta" set_n 0 bssid $bssid
+			wpa_cli -i "$bsta" save_config
+			echo 1
+		}
+		config_load wireless
+
+		config_foreach apply_config wifi-iface $1 $2
+		uci commit wireless
+	}
+
+	mapagent_process_bk() {
+		local section=$1
+		local bsta=$2
+
+
+		config_get ifname $section ifname
+		#echo bsta = $bsta > /dev/console
+
+		[ "$bsta" == "$ifname" ] || return
+		#echo found ifname=$ifname > /dev/console
+
+		config_get bssid $section bssid
+		config_get band $section band
+		ret=$(mapagent_apply_wl_bsta $ifname $bssid)
+		[ "$ret" == "1" ] && {
+			diff=1
+			onbrd_bssid=$bssid
+			onbrd_band=$band
+		}
+	}
+
+	mapagent_apply_bssid_same_band() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			uci -q set wireless.${section}.bssid=$bssid
+		}
+
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onbrd_band" != "$band" -o "$onboarded" = "1" ] && return
+
+		config_get ifname $1 ifname
+
+		config_load wireless
+		config_foreach apply_config wifi-iface $ifname $onbrd_bssid
+		uci commit wireless
+	}
+
+	config_foreach mapagent_process_bk bsta $ifname
+
+	#echo result diff = $diff > /dev/console
+	[ "$diff" == "1" ] && {
+		config_foreach mapagent_apply_bssid_same_band bsta
+		#ubus call uci commit '{"config":"wireless"}'
+		#echo reloading wireless > /dev/console
+	}
+
+}
+
+teardown_iface() {
+	config_load mapagent
+
+	local iface=$1
+
+	mapagent_teardown_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+
+			config_get ifname $section ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			uci -q set wireless.${section}.disabled="1"
+			uci -q set wireless.${section}.ssid="DISABLED-SSID"
+			uci -q set wireless.${section}.key="DISABLED-KEY"
+			uci -q delete wireless.${section}.multi_ap_backhaul_ssid
+			uci -q delete wireless.${section}.multi_ap_backhaul_key
+		}
+
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface $1
+	}
+
+	mapagent_teardown_bss() {
+		local section=$1
+		local iface=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get ifname $section ifname
+
+		[ "$iface" != "$ifname" ] && return
+
+		config_get ifname $section ifname
+		uci -q set mapagent.${section}.enabled="0"
+		uci -q set mapagent.${section}.ssid="DISABLED-SSID"
+		uci -q set mapagent.${section}.key="DISABLED-KEY"
+
+		# subshell in hopes to maintain mapagent config loaded
+		$(mapagent_teardown_wireless $ifname)
+	}
+
+
+	config_foreach mapagent_teardown_bss ap $iface
+
+	uci commit wireless
+	uci commit mapagent
+}
+
+bsta_to_wireless() {
+	config_load mapagent
+
+	mapagent_find_lowest_prio_onboarded() {
+		mapagent_process_bk() {
+			config_get priority $1 priority "2"
+			config_get onboarded $1 onboarded "0"
+
+			[ "$onboarded" = "0" ] && return
+
+			if [ -z "$sec" -o "$prio" = "-1" -o "$priority" -lt "$prio" ]; then
+				sec=$1
+				prio=$priority
+			fi
+		}
+
+		local sec=""
+		local prio="-1"
+
+		config_foreach mapagent_process_bk bsta
+		echo $sec
+	}
+
+	mapagent_enable_best() {
+		#echo 1=$1 best=$best > /dev/console
+		if [ "$1" = "$best" ]; then
+			uci -q set mapagent.$1.enabled='1'
+		else
+			uci -q set mapagent.$1.enabled='0'
+		fi
+	}
+
+	mapagent_bsta_to_wireless() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section=$1
+				local bsta=$2
+				local ssid="$3"
+				local key="$4"
+				local encryption=$5
+				local enabled=$6
+				local bssid=$7
+				local disabled="0"
+
+				config_get ifname $section ifname
+
+				[ -z "$enabled" -o "$enabled" = "0" ] && disabled="1"
+
+				[ "$bsta" == "$ifname" ] || return
+
+				uci -q set wireless.${section}.ssid="$ssid"
+				uci -q set wireless.${section}.key="$key"
+				uci -q set wireless.${section}.encryption=$encryption
+				uci -q set wireless.${section}.bssid="$bssid"
+				uci -q set wireless.${section}.default_disabled='0'
+
+				[ "$disabled" != "1" ] && return
+				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
+				wpa_cli -i "$bsta" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$bsta" save_config > /dev/null 2>&1
+
+				echo 1
+			}
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $@
+			uci commit wireless
+		}
+
+		mapagent_find_other_creds() {
+			#echo "trying to find other creds for $2" > /dev/console
+			config_get band $1 band
+			config_get onboarded $1 onboarded "0"
+
+			[ "$3" != "$band" -o "$onboarded" = "0" ] && return
+
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get enabled $1 enabled "0"
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $2 "$ssid" "$key" $encryption $4 "$bssid")
+		}
+
+		config_get band $1 band
+		config_get ifname $1 ifname
+		config_get onboarded $1 onboarded "0"
+		config_get enabled $1 enabled "0"
+
+		if [ "$onboarded" = "0" ]; then
+			config_foreach mapagent_find_other_creds bsta $ifname $band $enabled
+		else
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
+		fi
+	}
+
+#	best=$(mapagent_find_lowest_prio_onboarded)
+#
+#	[ -z "$best" ] && return
+#
+#	band=$1
+#	sec=""
+#	prio=""
+#
+#	config_foreach mapagent_enable_best bsta $best
+#	uci commit mapagent
+	config_load mapagent
+
+	diff=$(config_foreach mapagent_bsta_to_wireless bsta)
+
+#	[ "$diff" != "" ] && {
+
+		ubus call uci commit '{"config":"wireless"}'
+#	}
+}
+
+
+sync_mapcontroller_from_wireless() {
+	ubus -t 5 wait_for wifi
+	[ "$?" != "0" ] && return
+
+	[ ! -f "/etc/config/wireless" ] && return
+
+	status=$(ubus -S call wifi status)
+
+	device_to_band() {
+		local ifname=$1
+		json_load "$status"
+		json_select "radios"
+		json_get_keys keys
+
+		for key in $keys; do
+			json_select $key
+			json_get_var name name
+
+			if [ "$name" != "$ifname" ]; then
+				json_select ..
+				continue
+			fi
+
+			json_get_var band band
+
+			if [ "$band" == "5GHz" ]; then
+				echo "5"
+			elif [ "$band" == "2.4GHz" ]; then
+				echo "2"
+			fi
+
+			break
+		done
+
+		json_cleanup
+	}
+
+	wireless_process_iface() {
+		local section=$1
+		local type="ap"
+		local enabled="1"
+
+		config_get multi_ap $section multi_ap 0
+		[ "$multi_ap" != "1" ] && [ "$multi_ap" != "2" ] && return
+
+		config_get mode $section mode "ap"
+		[ "$mode" != "ap" ] && return
+
+		config_get device $section device
+		band=$(device_to_band $device)
+		[ "$band" == "" ] && return
+
+		config_get ssid $section ssid
+		config_get key $section key
+		config_get encryption $section encryption
+		config_get start_disabled $section start_disabled "0"
+		config_get network $section network
+
+
+		cntlr_section=$(uci add mapcontroller ${type})
+		uci -q set mapcontroller.${cntlr_section}.ssid="$ssid"
+		uci -q set mapcontroller.${cntlr_section}.key="$key"
+		uci -q set mapcontroller.${cntlr_section}.encryption="$encryption"
+		uci -q set mapcontroller.${cntlr_section}.band="$band"
+		uci -q set mapcontroller.${cntlr_section}.vid="1"
+		uci -q set mapcontroller.${cntlr_section}.network="$network"
+
+		[ "$multi_ap" == "1" ] && map_type="backhaul" || map_type="fronthaul"
+		uci -q set mapcontroller.${cntlr_section}.type="$map_type"
+
+		[ "$start_disabled" == "1" ] && enabled="0"
+		uci -q set mapcontroller.${cntlr_section}.enabled="$enabled"
+	}
+
+	mapcontroller_teardown() {
+		local section=$1
+
+		uci delete mapcontroller.$1
+	}
+
+	config_load mapcontroller
+	config_foreach mapcontroller_teardown ap
+
+	config_load wireless
+	config_foreach wireless_process_iface wifi-iface
+	uci commit mapcontroller
+}
+
+bsta_scan_on_enabled() {
+	local onboarded_bands=""
+
+	mapagent_onboarded_bands() {
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onboarded" = "0" ] && return
+
+		onboarded_bands="$onboarded_bands $band"
+	}
+
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname
+		config_get band $1 band
+		config_get enabled $1 enabled
+
+		[ "$enabled" = "0" ] && return
+
+		for onboarded_band in $onboarded_bands
+		do
+			[ "$onboarded_band" != "$band" ] && continue
+
+			logger -t multiap "bsta_scan_on_enabled $ifname $band"
+			wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
+			wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
+			wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		done
+	}
+
+	config_load mapagent
+	config_foreach mapagent_onboarded_bands bsta
+	config_foreach mapagent_enable_bk bsta
+}
+
+bsta_enable_all() {
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname "2"
+		uci -q set mapagent.$1.enabled="1"
+	}
+
+	config_load mapagent
+
+	config_foreach mapagent_enable_bk bsta
+	uci commit mapagent
+	bsta_scan_on_enabled
+}
+
+bsta_disable_lower_priority() {
+	config_load mapagent
+
+	mapagent_get_priority() {
+		config_get ifname $1 ifname
+
+		[ "$ifname" != "$2" ] && return
+
+		config_get priority $1 priority "2"
+
+		echo "$priority"
+	}
+
+	mapagent_disable_lower_bk() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section="$1"
+				local bsta="$2"
+				local enabled="$3"
+
+				config_get ifname $section ifname
+
+				[ "$bsta" == "$ifname" ] || return
+
+				[ "$enabled" != "0" ] && return
+
+				wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+				wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+			}
+			local ifname="$1"
+			local enabled="$2"
+
+			[ "$enabled" != "0" ] && return
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $ifname $enabled
+		}
+
+		local enabled="1"
+
+		config_get ifname $1 ifname
+		config_get priority $1 priority
+
+		[ "$ifname" != "$2" -a "$priority" -gt "$3" ] && enabled="0"
+
+		uci -q set mapagent.$1.enabled="$enabled"
+
+		echo $(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
+	}
+
+	local bsta=$1
+
+	prio=$(config_foreach mapagent_get_priority bsta $bsta)
+	#echo bsta $bsta has prio $prio > /dev/console
+
+	config_foreach mapagent_disable_lower_bk bsta $bsta $prio
+	uci commit mapagent
+
+#	ubus call uci commit '{"config":"wireless"}'
+}
+
+
+bsta_use_link() {
+	config_load mapagent
+
+	mapagent_disable_bk() {
+		local bsta="$2"
+
+		config_get ifname $1 ifname
+		config_get enabled $1 enabled
+
+		[ "$bsta" = "$ifname" ] && return
+
+		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+		wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+	}
+
+	local bsta=$1
+
+	config_foreach mapagent_disable_bk bsta $bsta
+}
+
+bsta_swap_to_link() {
+	bsta_disable_lower_priority $1
+	bsta_use_link $1
+
+	wpa_cli -i "$1" enable_network 0 > /dev/null
+	wpa_cli -i "$1" reconnect > /dev/null
+	wpa_cli -i "$1" save_config > /dev/null
+}
+
+set_uplink_backhaul_info() {
+	local ul_1905id=$1
+	local ul_mac=$2
+
+	json_load "$(cat $MAPFILE)"
+	json_add_string "backhaul_device_id" "$ul_1905id"
+	json_add_string "backhaul_macddr" "$ul_mac"
+	json_dump > "$MAPFILE"
+	json_cleanup
+}
+
+set_uplink() {
+	local type=$1
+	local ifname=$2
+	local hwaddr
+
+	hwaddr="$(ifconfig $ifname | grep -i hwaddr | awk '{print $5}' | awk '{print tolower($0)}')"
+
+	json_init
+	json_add_string "type" "$type"
+	json_add_string "ifname" "$ifname"
+	json_add_string "macaddr" "$hwaddr"
+	json_dump > "$MAPFILE"
+	json_cleanup
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":true, "prevent_island":true, "ifname":"all"}'
+	fi
+
+}
+
+unset_uplink() {
+	local type=${1:-wifi}
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":false, "prevent_island":true, "ifname":"all"}'
+	fi
+
+	rm -f "$MAPFILE" > /dev/null 2>&1
+}
+
+func=$1
+shift
+
+case "$func" in
+	wireless_teardown) wireless_teardown;;
+	setup_network) setup_network;;
+	setup_wireless) setup_wireless;;
+	write_credentials) write_credentials;;
+	sync_credentials) sync_credentials;;
+	bsta_steer) bsta_steer $@;;
+	set_network) set_network $@;;
+	write_bsta_config) write_bsta_config $@;;
+	teardown_iface) teardown_iface $@;;
+	bsta_to_wireless) bsta_to_wireless $@;;
+	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
+	ts) ts_sub $@;;
+	bsta_enable_all) bsta_enable_all $@;;
+	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;
+	bsta_scan_on_enabled) bsta_scan_on_enabled $@;;
+	bsta_use_link) bsta_use_link $@;;
+	bsta_swap_to_link) bsta_swap_to_link $@;;
+	set_uplink) set_uplink $@;;
+	set_uplink_backhaul_info) set_uplink_backhaul_info $@;;
+	unset_uplink) unset_uplink $@;;
+	--help|help) usage;;
+	*) usage; exit 1;;
+esac
+

map-agent/files/lib/wifi/traffic_separation

@@ -0,0 +1,511 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+### Traffic Separation ###
+
+dbg() {
+	logger -t traffic_separation $@
+}
+
+ts_sub() {
+
+	ts_usage() {
+		cat <<EOF
+Usage: $0 [create|delete|populate|primary|reload]
+Traffic Separation related functions.
+create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
+create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
+create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethernet interface
+delete <iface>				- delete vlan device
+populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
+primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
+reload     				- reload network with new configuration
+EOF
+	exit 1
+	}
+
+	_get_bridge() {
+		local bridge=$(ip link show $1 | grep -o "master [^\s]*" | cut -d ' ' -f 2)
+		echo $bridge
+	}
+
+	set_wireless_bridge() {
+		config_load wireless
+
+		_set_network() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+			[ "$iface" != "$ifname" ] && continue
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
+
+			config_get network $sec network
+			local new_network=${bridge##br-}
+			if [ "$new_network" != "$network" ] ; then
+				uci -q set wireless.${sec}.network=${new_network}
+				uci commit wireless
+			fi
+
+			brctl addif $bridge $iface &> /dev/null
+		}
+
+		config_foreach _set_network wifi-iface ${1} ${2}
+	}
+
+	ts_create() {
+
+		_create_vlan_dev() {
+			iface=$1				# real iface
+			vid=$2					# Vlan ID
+			bridge=$3				# bridge iface should be connected
+			vlan_dev=$4
+
+			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+
+			# remove interface from bridge if it is in one
+			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
+
+			# (re)create vlan device
+			ip link show $vlan_dev && vlanctl --if-delete $vlan_dev
+			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
+
+			vlanctl --if $iface --tx --tags 0 --default-miss-drop
+			vlanctl --if $iface --tx --tags 1 --default-miss-drop
+			vlanctl --if $iface --tx --tags 2 --default-miss-drop
+			vlanctl --if $iface --rx --tags 0 --default-miss-drop
+			vlanctl --if $iface --rx --tags 1 --default-miss-drop
+			vlanctl --if $iface --rx --tags 2 --default-miss-drop
+
+			# bring the vlan device up and add back to bridge if it was in one
+			brctl addif $bridge $vlan_dev &> /dev/null
+		}
+
+		ts_create_fh() {
+			iface=$1				# fh iface
+			vid=$2					# SSID specific (secondary) or primary vid
+			bridge=$3
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
+				cat <<EOF
+Adding FH device requires IFACE, VID and bridge
+EOF
+				exit 1
+			}
+
+			# create vlan device
+			#set_wireless_bridge $iface $bridge
+
+			vlan_dev=${iface}_vlan${vid}
+			ip link set $vlan_dev down
+			_create_vlan_dev $iface $vid $bridge $vlan_dev
+
+			# add rules
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
+
+			# EAPOL frames
+			vlanctl --if $iface --rx --tags 0 --filter-ethertype 34958 --set-rxif $vlan_dev --rule-append
+			vlanctl --if $iface --rx --tags 1 --filter-ethertype 34958 --pop-tag --set-rxif $vlan_dev --rule-append
+			vlanctl --if $iface --tx --tags 0 --filter-txif $vlan_dev --filter-ethertype 34958 --rule-append
+
+			# 8021q vlan id TAG/UNTAG
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
+
+			ip link set $iface up
+			ip link set $vlan_dev up
+		}
+
+		ts_create_bh() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
+			bridge=$4				# bridge interface should be connected to
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
+
+			#[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
+
+			old_vid=$(wl -i $1 map_8021q_settings)
+			old_vid=${old_vid##* }
+			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
+
+			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
+
+			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
+			wl -i $iface down &> /dev/null
+			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
+			wl -i $iface map_8021q_settings $vid &> /dev/null	# can only be set on bBSS (read-only on bSTA)
+			wl -i $iface up &> /dev/null
+		}
+
+		ts_create_lei() {
+			vid=$1					# primary vid
+			pbits=$2				# default pbits to apply
+			vlan_bridge=$3				# name of ts subsystem bridge
+			lan_bridge=$4				# name of node local bridge
+
+			[ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
+				cat <<EOF
+Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
+EOF
+				exit 1
+			}
+
+			ip link show lei &> /dev/null || {
+				ip link add link lei name lei_lan type vlan id 1 2>/dev/null
+			}
+
+			old_vid=$(ip -d link show lei_lan | sed -n 's/vlan.*id \([0-9][0-9]*\) .*/\1/p')
+
+			[ "$old_vid" != "$vid" ] && {
+				ip link del lei_lan
+				ip link add link lei name lei_lan type vlan id ${vid}
+			}
+
+			brctl addif ${lan_bridge} lei_lan &>/dev/null
+			brctl addif ${vlan_bridge} lei_map &>/dev/null
+
+			ip link set lei up
+			ip link set lei_map up
+			ip link set lei_lan up
+		}
+
+		_create_eth() {
+			iface=$1				# Multi-AP Logical Ethernet Interface
+			vid=$2					# primary vid
+			bridge=$3				# name of ts subsystem bridge
+			pbits=0
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ] || {
+				cat <<EOF
+Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
+EOF
+				exit 1
+			}
+
+			dbg create $@
+
+			ip link set $iface down
+
+			vlan_dev=${iface}_vlan${vid}
+			ip link set $vlan_dev down
+			_create_vlan_dev $iface $vid $bridge $vlan_dev
+
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
+
+			[ $# -le 3 ] && exit 0
+			shift 3
+
+			while [ -n "$1" ] ; do
+				vid=$1
+				vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append
+				vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append
+				shift
+			done
+
+			ip link set $iface up
+			ip link set $vlan_dev up
+		}
+
+		ts_create_eths() {
+			pvid=$1					# primary vid
+			bridge=$2				# name of ts subsystem bridge
+
+			shift 2
+			# TODO use ieee1905 bridge
+			for iface in $(uci get network.br_lan.ports) ; do
+				[ "$iface" = "lei_lan" ] && continue
+				_create_eth $iface $pvid $bridge $@
+				ubus call ieee1905 del_interface "{\"ifname\":\"$iface\"}"
+			done
+		}
+
+		ts_create_dhcp() {
+			local diff=""
+
+                        _net_setup() {
+				local name=$1
+				local devname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="$devname"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					# TODO vid > 255
+					local ip_addr="192.168.${vid}.1"
+					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
+					uci -q set network.${name}.ipaddr="${ip_addr}"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_br_setup() {
+				local name=$1
+				local sinkname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name}_dev)" ] && {
+					uci -q set network.${name}_dev="device"
+					uci -q set network.${name}_dev.name="br-${name}"
+					uci -q set network.${name}_dev.type="bridge"
+					uci -q set network.${name}_dev.bridge_empty="1"
+					uci -q add_list network.${name}_dev.ports="${sinkname}"
+
+					diff="1"
+				}
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="br-${name}"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					uci -q set network.${name}.ipaddr="192.168.${vid}.1"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_dhcp_setup() {
+				local name=$1
+
+				[ -n "$(uci -q get dhcp.${name})" ] && return
+
+				uci -q set dhcp.${name}=dhcp
+				uci -q set dhcp.${name}.interface="${name}"
+				uci -q set dhcp.${name}.start="100"
+				uci -q set dhcp.${name}.limit="150"
+				uci -q set dhcp.${name}.leasetime="1h"
+				uci -q set dhcp.${name}.dhcpv4="server"
+				uci -q set dhcp.${name}.dhcpv6="server"
+				uci -q set dhcp.${name}.ra="server"
+				uci -q set dhcp.${name}.ra_slaac="1"
+				uci -q add_list dhcp.${name}.ra_flags="managed-config"
+				uci -q add_list dhcp.${name}.ra_flags="other-config"
+
+				diff="1"
+				uci -q commit dhcp
+			}
+
+			_firewall_setup() {
+				local name=$1
+				local network=$2
+				local zone_exist=0
+
+				config_load firewall
+
+				_process_zone() {
+					local section=$1
+					local new_name=$2
+					local name
+
+					config_get name $section name
+
+					[ "$name" == "$new_name" ] && zone_exist=1
+				}
+
+				config_foreach _process_zone zone $name
+
+				[ "$zone_exist" != "0" ] && return
+
+				uci -q add firewall zone
+				uci -q set firewall.@zone[-1].name="$name"
+				uci -q add_list firewall.@zone[-1].network="$network"
+				uci -q set firewall.@zone[-1].input='ACCEPT'
+				uci -q set firewall.@zone[-1].output='ACCEPT'
+				uci -q set firewall.@zone[-1].forward='ACCEPT'
+
+				uci -q add firewall forwarding
+				uci -q set firewall.@forwarding[-1].src="$name"
+				uci -q set firewall.@forwarding[-1].dest="wan"
+
+				diff="1"
+				uci -q commit firewall
+			}
+
+			vid=$1					# primary vid
+
+			[ -n "$vid" ] || {
+				cat <<EOF
+VID required to configure DHCP.
+EOF
+				exit 1
+			}
+
+			ip link show sink${vid} || {
+				ip link add sink${vid} type veth peer name sink${vid}_vlan
+				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
+			}
+
+			ip link set sink${vid} up
+			ip link set sink${vid}_peer up
+			ip link set sink${vid}_vlan up
+
+			diff=""
+			_net_setup sink${vid} sink${vid}_peer ${vid}
+			_dhcp_setup sink${vid}
+			_firewall_setup lan${vid} sink${vid}
+
+			[ "$diff" = "1" ] && {
+				ubus call network reload
+				ubus -t 5 wait_for network.interface.sink${vid}
+			}
+
+			brctl addif br-map sink${vid}_vlan &> /dev/null
+		}
+
+	local type=$1
+	shift
+
+	case "$type" in
+		fh) ts_create_fh $@;;
+		bh) ts_create_bh $@;;
+		lei) ts_create_lei $@;;
+		eths) ts_create_eths $@;;
+		dhcp) ts_create_dhcp $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+	}
+
+	ts_delete() {
+		iface=$1
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 0
+
+		vlan_dev=${path##*upper_}
+		bridge="$(_get_bridge $vlan_dev)"
+
+		[ -n "$bridge" ] && {
+			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
+			brctl addif $bridge $iface &> /dev/null # needed to add again
+                }
+
+	}
+
+	ts_populate() {
+		local type=$1
+		shift
+
+		[ "$type" == "eth" ] || {
+			cat <<EOF
+Populating ETH rules requires IFACE and VID.
+EOF
+			exit 1
+		}
+
+		iface=$1				# Multi-AP Logical Ethernet Interface
+		vid=$2					# secondary vid
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 1
+		vlan_dev=${path##*upper_}
+
+		# add rules
+		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
+		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
+	}
+
+	ts_primary() {
+		local func=$1
+		shift
+
+		case "$func" in
+			get) vid=$(wl -i $1 map_8021q_settings); echo ${vid##* };;
+			*) ts_usage; exit 1;;
+		esac
+	}
+
+	ts_unicast() {
+		local mac=$1
+		local iface=$2
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "$mac" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d "$mac" -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d "$mac" -p 0x893a -j DROP
+	}
+
+	ts_multicast() {
+		local iface=$1
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "1:80:C2:00:00:13" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -D BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+	}
+
+	ts_reload() {
+		local dhcp_reload=$1
+
+		# workaround for missing backhaul wifi.ap.* ubus obj's:
+		# iterate in config and setup bh
+		config_load wireless
+
+		_setup_bh_iface() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
+				ts_create bh $ifname 1 2 br-map
+			}
+		}
+
+		config_foreach _setup_bh_iface wifi-iface
+
+		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
+
+		# another workaround for netif? removed
+		# sink devices for br-map bridge
+		for sink in $(ubus list network.interface.sink*) ; do
+			local sink_vlan=${sink/network.interface./}_vlan
+			brctl addif br-map $sink_vlan &> /dev/null
+		done
+	}
+
+	local func=$1
+	shift
+
+	case "$func" in
+		create) dbg "create $@"; ts_create $@;;
+		delete) dbg "delete $@"; ts_delete $@;;
+		populate) dbg "populate $@"; ts_populate $@;;
+		primary) dbg "primary $@"; ts_primary $@;;
+		unicast) dbg "unicast $@"; ts_unicast $@;;
+		multicast) dbg "multicast $@"; ts_multicast $@;;
+		reload) dbg "reload $@"; ts_reload $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+}

map-controller/Config.in

@@ -6,21 +6,5 @@ config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 	bool "Support Dynamic Controller configuration sync"
 	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
 
-config CONTROLLER_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through CONTROLLER_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-controller/Makefile

@@ -1,13 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.11.0.5
+PKG_VERSION:=6.0.21
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=74c86c5468a5f42421e382eb90a53a643a2e6655
+PKG_SOURCE_VERSION:=a388472887744d404825ee5602ab906bf1fc225c
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -17,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-controller
@@ -38,7 +38,6 @@ define Package/map-controller/config
 endef
 
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
@@ -49,17 +48,11 @@ ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
 
-ifeq ($(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapcontroller $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/src/plugins/steer/rcpi/rcpi.so $(1)/usr/lib/mapcontroller/rcpi.so
 endef
 
 ifeq ($(LOCAL_DEV),1)

map-controller/files/etc/config/mapcontroller

@@ -6,7 +6,7 @@ config controller 'controller'
 	option enable_bsta_steer '0'
 	option use_bcn_metrics '0'
 	option use_usta_metrics '0'
-	option primary_vid '0'
+	option primary_vid '1'
 	option primary_pcp '0'
 	option allow_bgdfs '0'
 	option channel_plan '0'

map-controller/files/etc/init.d/mapcontroller

@@ -23,10 +23,7 @@ validate_controller_section() {
 		'enable_sta_steer:bool:false' \
 		'enable_bsta_steer:bool:false' \
 		'use_bcn_metrics:bool:false' \
-		'use_usta_metrics:bool:false' \
-		'allow_bgdfs:range(0,2629744)' \
-		'channel_plan:range(0,2629744)' \
-		'enable_ts:bool:false'
+		'use_usta_metrics:bool:false'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapcontroller" "Validation of controller section failed"
@@ -40,7 +37,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'ssid:string' \
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \

map-topology/Config.in

@@ -1,22 +0,0 @@
-if (PACKAGE_map-topology)
-
-menu "Configurations"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through TOPOLOGYD_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-topology/Makefile

@@ -1,45 +1,38 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.4
+PKG_VERSION:=4.0.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=488ce1ce576b57c9b3c4d7c034969bf65e66216f
+PKG_SOURCE_VERSION:=f0c36d13b19c100639a8f657a6a027bbfd74b802
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DEPENDS:=ieee1905
-
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-topology
 	CATEGORY:=Utilities
 	DEPENDS:=+libubox +ubus +libpthread +libuci +libeasy \
-		 +libavahi-nodbus-support +libnetfilter-conntrack +libnfnetlink +libmnl
+		 +libavahi-nodbus-support +ieee1905
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
-define Package/map-topology/config
-	source "$(SOURCE)/Config.in"
-endef
-
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
 	-D_GNU_SOURCE
 
 define Package/map-topology/description
@@ -48,11 +41,6 @@ endef
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/map-topology/* $(PKG_BUILD_DIR)/

map-topology/files/etc/config/hosts

@@ -2,4 +2,3 @@
 config global 'global'
 	option ageing_timer '1440'
 	option reboot_persistent '0'
-	list ifname 'br-lan'

mosquitto-auth-shadow/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mosquitto-auth-shadow
-PKG_VERSION:=1.0.0
-
-PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
-PKG_LICENSE:=EPL-2.0
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mosquitto-auth-shadow
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=mosquitto - /etc/shadow authentication plugin
-  DEPENDS:=mosquitto
-  USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
-endef
-
-define Package/mosquitto-auth-shadow/description
-  Plugin for the mosquitto MQTT message broker that authenticates
-  users using /etc/shadow
-endef
-
-define Package/mosquitto-auth-shadow/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,mosquitto-auth-shadow))

mosquitto-auth-shadow/files/etc/uci-defaults/14_set-shadow-permissions

@@ -1 +0,0 @@
-chown root:shadow /etc/shadow && chmod 0640 /etc/shadow

mosquitto-auth-shadow/src/Makefile

@@ -1,25 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-TARGETS = mosquitto_auth_shadow.so
-
-all: $(TARGETS)
-
-%.pic.o: %.c
-	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
-
-mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
-	$(CC) $(LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(TARGETS)

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 2022 Genexis B.V.
- *
- * This program and the accompanying materials are made available under the
- * terms of the Eclipse Public License 2.0 which is available at
- * https://www.eclipse.org/legal/epl-2.0/
- *
- * SPDX-License-Identifier: EPL-2.0
- *
- * Contributors:
- *   Erik Karlsson - initial implementation
- */
-
-#include <string.h>
-#include <shadow.h>
-#include <crypt.h>
-#include <mosquitto.h>
-#include <mosquitto_broker.h>
-#include <mosquitto_plugin.h>
-
-static int basic_auth_callback(int event, void *event_data, void *userdata)
-{
-	struct mosquitto_evt_basic_auth *ed = event_data;
-	struct spwd spbuf, *sp = NULL;
-	char buf[256];
-	struct crypt_data data;
-	char *hash;
-
-	/* Let other plugins or broker decide about anonymous login */
-	if (ed->username == NULL)
-		return MOSQ_ERR_PLUGIN_DEFER;
-
-	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
-
-	if (sp == NULL || sp->sp_pwdp == NULL)
-		return MOSQ_ERR_AUTH;
-
-	/* Empty string as hash means password is not required */
-	if (sp->sp_pwdp[0] == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	if (ed->password == NULL)
-		return MOSQ_ERR_AUTH;
-
-	memset(&data, 0, sizeof(data));
-	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
-
-	if (hash == NULL)
-		return MOSQ_ERR_AUTH;
-
-	if (strcmp(hash, sp->sp_pwdp) == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	return MOSQ_ERR_AUTH;
-}
-
-int mosquitto_plugin_version(int supported_version_count,
-			     const int *supported_versions)
-{
-	return 5;
-}
-
-int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
-			  void **user_data,
-			  struct mosquitto_opt *opts, int opt_count)
-{
-	*user_data = identifier;
-
-	return mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
-					   basic_auth_callback, NULL, NULL);
-}
-
-int mosquitto_plugin_cleanup(void *user_data,
-			     struct mosquitto_opt *opts, int opt_count)
-{
-	mosquitto_plugin_id_t *identifier = user_data;
-
-	return mosquitto_callback_unregister(identifier, MOSQ_EVT_BASIC_AUTH,
-					     basic_auth_callback, NULL);
-}

obuspa/Config.in

@@ -21,9 +21,5 @@ config OBUSPA_MTP_ENABLE_STOMP
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
 	default n
-
-config OBUSPA_CONTROLLER_MTP_VERIFY
-	bool "Enable verification of MQTT response topic before processing the message"
-	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=6.0.0.1
+PKG_VERSION:=5.0.0.11
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=b8bc6a70f07b40c8512e8894461602f47981df97
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE_VERSION:=6372841ada18a4f577799fedb19f489ec1f28255
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -43,14 +43,11 @@ define Package/obuspa/config
 endef
 
 TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
 	-D_GNU_SOURCE \
 	-Wall \
 	-Werror
 
-ifneq ($(CONFIG_OBUSPA_CONTROLLER_MTP_VERIFY),)
-  TARGET_CFLAGS += -DOBUSPA_CONTROLLER_MTP_VERIFY
-endif
-
 ifneq ($(CONFIG_OBUSPA_DB_PATH),)
   CONFIGURE_ARGS += \
 	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
@@ -100,15 +97,12 @@ define Package/obuspa/install
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/obuspa
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
 	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
 	$(INSTALL_DATA) ./files/etc/obuspa/roles.json $(1)/etc/obuspa/roles.json
 	$(INSTALL_DATA) ./files/etc/obuspa/dmcaching_exclude.json $(1)/etc/obuspa/dmcaching_exclude.json
 	$(INSTALL_DATA) ./files/etc/bbfdm/json/USPAgent.json $(1)/etc/bbfdm/json/USPAgent.json
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/TransferComplete.json $(1)/etc/bbfdm/json/TransferComplete.json
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,17 +1,30 @@
 config obuspa 'global'
 	option enabled '1'
+	option interface 'loopback'
+	#option ifname 'lo'
 	option debug '1'
 	option log_level '1'
-	option prototrace '1'
-	option db_file '/etc/obuspa/usp.db'
+	option prototrace '0'
+	#option db_file '/etc/obuspa/usp.db'
 	#option role_file '/etc/obuspa/roles.json'
 	option dm_caching_exclude '/etc/obuspa/dmcaching_exclude.json'
 	#option trust_cert '/etc/obuspa/rootCA.pem'
 	#option client_cert '/etc/obuspa/client.pem'
 	#option log_dest '/var/log/obuspa'
 
+config localagent 'localagent'
+	option Enable '1'
+
+# Adds Device.LocalAgent.Controller.
+config controller 'localcontroller'
+	option EndpointID 'proto::interop-usp-controller'
+	option Protocol 'MQTT'
+	option Topic '/usp/controller'
+	option mqtt 'localmqtt'
+	option assigned_role_name 'full_access'
+
 # Adds Device.LocalAgent.MTP.
-config mtp 'agent_mtp'
+config mtp
 	option Protocol 'MQTT'
 	option ResponseTopicConfigured '/usp/endpoint'
 	option mqtt 'localmqtt'
@@ -22,30 +35,13 @@ config mqtt 'localmqtt'
 	option BrokerPort '1883'
 	option TransportProtocol 'TCP/IP'
 
-# Adds Device.LocalAgent.Controller.
-config controller 'localcontroller'
-	option EndpointID 'proto::interop-usp-controller'
-	option Protocol 'MQTT'
-	option Topic '/usp/controller'
-	option mqtt 'localmqtt'
-	option assigned_role_name 'full_access'
-
 # Add Device.LocalAgent.Subscription.
-#config subscription 'sub_event'
-#    option ID 'uci-sub-events'
-#    option NotifType 'Event'
-#    list ReferenceList 'Device.Boot!'
-#    list ReferenceList 'Device.LocalAgent.TransferComplete!'
-#    option Persistent 'true'
-#    option controller 'localcontroller'
-
-#config subscription 'sub_op_comp'
-#   option ID 'uci-sub-op_complete'
-#   option NotifType 'OperationComplete'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Download()'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Activate()'
-#   option Persistent 'true'
-#   option controller 'localcontroller'
+config subscription
+	option ID 'default-boot-event-ACS'
+	option NotifType 'Event'
+	option ReferenceList 'Device.Boot!'
+	option Persistent 'true'
+	option controller 'localcontroller'
 
 #config challenge 'admin'
 #	option Description 'Request to get Administrative access'

obuspa/files/etc/uci-defaults/01-fix-upgrade-uci

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-fix_stomp_section() {
-	local encryption
-
-	config_get_bool encryption $1 encryption ""
-	if [ -n "${encryption}" ]; then
-		uci_set obuspa $1 encryption ""
-		uci_set obuspa $1 EnableEncryption "$encryption"
-	fi
-}
-
-# fix the stomp encryption parameter
-config_load obuspa
-config_foreach fix_stomp_section stomp
-uci_commit

obuspa/patches/0001-validate-mtp-topic.patch

@@ -1,140 +0,0 @@
-diff --git a/src/core/device.h b/src/core/device.h
-index adf8fa6..072f953 100644
---- a/src/core/device.h
-+++ b/src/core/device.h
-@@ -111,6 +111,7 @@ typedef struct
-     // Following member variables only set if USP message was received over MQTT
-     int mqtt_instance;
-     char *mqtt_topic;           // only set if reply_to was specified in the received MQTT packet
-+    char *mqtt_topic_recv;
- 
- 
-     // Following member variables only set if USP message was received over CoAP
-@@ -252,7 +253,7 @@ void DEVICE_MTP_NotifyMqttConnDeleted(int mqtt_instance);
- int DEVICE_MTP_ValidateMqttReference(dm_req_t *req, char *value);
- void DEVICE_CONTROLLER_SetRolesFromMqtt(int mqtt_instance, ctrust_role_t role);
- char *DEVICE_CONTROLLER_GetControllerTopic(int mqtt_instance);
--
-+int validate_controller_topic_by_endpointid(char *endpointid, mtp_protocol_t proto, char *recv_topic);
- //------------------------------------------------------------------------------
- // Tables used to convert to/from an enumeration to/from a string
- extern const enum_entry_t mtp_protocols[kMtpProtocol_Max];
-diff --git a/src/core/device_controller.c b/src/core/device_controller.c
-index 62c803f..103388d 100755
---- a/src/core/device_controller.c
-+++ b/src/core/device_controller.c
-@@ -239,6 +239,41 @@ int Async_E2ESessionReset(dm_req_t *req, kv_vector_t *input_args, int request);
- extern const enum_entry_t e2e_session_modes[kE2EMode_Max];
- #endif
- 
-+
-+int validate_controller_topic_by_endpointid(char *endpointid, mtp_protocol_t proto, char *recv_topic)
-+{
-+    controller_t *cont = FindEnabledControllerByEndpointId(endpointid);
-+    if (cont == NULL)
-+    {
-+        USP_LOG_Error("not able to find the controller from endpointid [%s]", endpointid);
-+        return USP_ERR_PERMISSION_DENIED;
-+    }
-+#ifdef ENABLE_MQTT
-+    if (proto == kMtpProtocol_MQTT)
-+    {
-+        controller_mtp_t *mtp = FindFirstEnabledMtp(cont, proto);
-+
-+        if (mtp == NULL) {
-+            USP_LOG_Error("Not able to find mtp[%d] for endpointid [%s]", proto, endpointid);
-+            return USP_ERR_REQUEST_DENIED;
-+        }
-+
-+        if (mtp->protocol != proto) {
-+            USP_LOG_Error("No matching mtp[%d] for endpointid [%s]", proto, endpointid);
-+            return USP_ERR_REQUEST_DENIED;
-+        }
-+
-+        char *response_topic = DEVICE_MTP_GetAgentMqttResponseTopic(mtp->mqtt_connection_instance);
-+        if (response_topic && strcmp(response_topic, recv_topic) != 0 ) {
-+            USP_LOG_Error("Controller response topic[%s] and recv topic[%s] mismatch, probably a spoof message", response_topic, recv_topic);
-+            return USP_ERR_PERMISSION_DENIED;
-+        }
-+    }
-+#endif
-+
-+    return USP_ERR_OK;
-+}
-+
- /*********************************************************************//**
- **
- ** DEVICE_CONTROLLER_Init
-diff --git a/src/core/dm_exec.c b/src/core/dm_exec.c
-index c0b95d8..6eb51e2 100755
---- a/src/core/dm_exec.c
-+++ b/src/core/dm_exec.c
-@@ -624,6 +624,7 @@ void DM_EXEC_PostUspRecord(unsigned char *pbuf, int pbuf_len, ctrust_role_t role
-     pur->mtp_reply_to.coap_encryption = mrt->coap_encryption;
-     pur->mtp_reply_to.coap_reset_session_hint = mrt->coap_reset_session_hint;
-     pur->mtp_reply_to.mqtt_topic = USP_STRDUP(mrt->mqtt_topic);
-+    pur->mtp_reply_to.mqtt_topic_recv = USP_STRDUP(mrt->mqtt_topic_recv);
-     pur->mtp_reply_to.mqtt_instance = mrt->mqtt_instance;
-     pur->mtp_reply_to.wsclient_cont_instance = mrt->wsclient_cont_instance;
-     pur->mtp_reply_to.wsclient_mtp_instance = mrt->wsclient_mtp_instance;
-@@ -1144,6 +1145,7 @@ void ProcessMessageQueueSocketActivity(socket_set_t *set)
-             USP_SAFE_FREE(mrt->coap_resource);
-             USP_SAFE_FREE(mrt->mqtt_topic);
-             USP_SAFE_FREE(mrt->cont_endpoint_id);
-+            USP_SAFE_FREE(mrt->mqtt_topic_recv);
-             break;
- 
- #ifndef DISABLE_STOMP
-diff --git a/src/core/mqtt.c b/src/core/mqtt.c
-index 7dba9f4..3ee9c97 100644
---- a/src/core/mqtt.c
-+++ b/src/core/mqtt.c
-@@ -3141,6 +3141,7 @@ void ReceiveMqttMessage(mqtt_client_t *client, const struct mosquitto_message *m
-         mrt.mqtt_topic = response_topic;
-     }
- 
-+    mrt.mqtt_topic_recv = message->topic;
-     // Message may not be valid USP
-     DM_EXEC_PostUspRecord(message->payload, message->payloadlen, client->role, &mrt);
- }
-diff --git a/src/core/msg_handler.c b/src/core/msg_handler.c
-index ce67626..4af9ade 100644
---- a/src/core/msg_handler.c
-+++ b/src/core/msg_handler.c
-@@ -118,7 +118,7 @@ static enum_entry_t mtp_content_types[] = {
- //------------------------------------------------------------------------------
- // Forward declarations. Note these are not static, because we need them in the symbol table for USP_LOG_Callstack() to show them
- int HandleUspMessage(Usp__Msg *usp, char *controller_endpoint, mtp_reply_to_t *mrt);
--int ValidateUspRecord(UspRecord__Record *rec);
-+int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt);
- char *MtpSendItemToString(mtp_send_item_t *msi);
- void CacheControllerRoleForCurMsg(char *endpoint_id, ctrust_role_t role, mtp_protocol_t protocol);
- int QueueUspNoSessionRecord(usp_send_item_t *usi, char *endpoint_id, char *usp_msg_id, mtp_reply_to_t *mrt, time_t expiry_time);
-@@ -172,7 +172,7 @@ int MSG_HANDLER_HandleBinaryRecord(unsigned char *pbuf, int pbuf_len, ctrust_rol
- #endif
- 
-     // Exit if USP record failed validation
--    err = ValidateUspRecord(rec);
-+    err = ValidateUspRecord(rec, mrt);
-     if (err != USP_ERR_OK)
-     {
-         goto exit;
-@@ -725,7 +725,7 @@ exit:
- ** \return  USP_ERR_OK if record is valid
- **
- **************************************************************************/
--int ValidateUspRecord(UspRecord__Record *rec)
-+int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt)
- {
-     char *endpoint_id;
- 
-@@ -806,6 +806,9 @@ int ValidateUspRecord(UspRecord__Record *rec)
-         return USP_ERR_REQUEST_DENIED;
-     }
- 
-+#if OBUSPA_CONTROLLER_MTP_VERIFY
-+    return validate_controller_topic_by_endpointid(rec->from_id, mrt->protocol, mrt->mqtt_topic_recv);
-+#endif
-     // If the code gets here, then the USP record passed validation, and the encapsulated USP message may be processed
-     return USP_ERR_OK;
- }

periodicstats/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=periodicstats
-PKG_VERSION:=1.2.1
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6c68428405bc88a9990e855f911aecc86f07f4a8
+PKG_SOURCE_VERSION:=2779815d2b87e5966e27cfafe88070d0a8970a25
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/periodicstats.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -20,13 +20,15 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/periodicstats
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Periodic Statistics Daemon
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libbbf_api
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/periodicstats/description

ponmngr/Makefile

@@ -6,7 +6,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=ponmngr
-PKG_VERSION:=1.0.1
+PKG_VERSION:=1.0.0
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
@@ -17,12 +17,11 @@ include $(INCLUDE_DIR)/package.mk
 
 define Package/ponmngr
 	CATEGORY:=Utilities
-	TITLE:=PON Manager
-	DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet)
+	TITLE:=ponmngr packets manager daemon
 endef
 
 define Package/ponmngr/description
-	Configures PON
+	Configures pon
 endef
 
 #define Build/Prepare
@@ -33,12 +32,7 @@ define Build/Compile
 endef
 
 define Package/ponmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_iopsys_econet),)
-	$(CP) ./files/airoha/* $(1)/
-endif
+	$(CP) ./files/* $(1)/
 endef
 
 $(eval $(call BuildPackage,ponmngr))

ponmngr/files/airoha/lib/xpon/airoha.sh

@@ -1,25 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_serial_number() {
-	vendor_id=$1
-	vssn=$2
-
-	/userfs/bin/omcicfgCmd set sn ${vendor_id}${vssn}
-}
-
-init_xpon() {
-	procd_open_instance ponmgr_cfg
-	procd_set_param command /userfs/bin/ponmgr_cfg
-	procd_close_instance
-	procd_open_instance omci
-	procd_set_param command /userfs/bin/omci
-	procd_close_instance
-}
-
-deinit_xpon() {
-	killall -9 omci 2>/dev/null
-	killall -9 ponmgr_cfg 2>/dev/null
-}
-

ponmngr/files/broadcom/lib/xpon/broadcom.sh

@@ -1,30 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_serial_number() {
-	vendor_id=$1
-	vssn=$2
-
-	vendor_id="$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')"
-	vendor_id=${vendor_id:0:8}
-
-	bs /b/c gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vssn}
-}
-
-init_xpon() {
-	procd_open_instance pon_msgd
-	procd_set_param command bcm_msgd -c gpon
-	procd_close_instance
-
-	procd_open_instance pon_daemon
-	procd_set_param command omcid start -n
-	procd_set_param respawn
-	procd_close_instance
-}
-
-deinit_xpon() {
-	# stopping omcid does not bring down the pon link, which should happen
-	# if ANI is disabled or stopped (go to O1)
-	gponctl stop
-}

ponmngr/files/common/etc/init.d/xpon

@@ -1,38 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=19
-STOP=91
-
-USE_PROCD=1
-
-. /lib/functions.sh
-include /lib/xpon
-
-configure_serial_number() {
-	serial_number="$(uci -q get xpon.ani.serial_number)"
-	if [ ${#serial_number} -eq 12 ]; then
-		vendor_id="${serial_number:0:4}"
-		vssn="${serial_number:4:8}"
-	else
-		macaddr="$(fw_printenv -n ethaddr | tr -d ':' | tr 'a-z' 'A-Z')"
-		vendor_id="IOPS"
-		vssn="${macaddr:4:8}"
-	fi
-
-	set_serial_number $vendor_id $vssn
-}
-
-start_service() {
-	if [ "$(uci -q get xpon.ani.enable)" == "1" ]; then
-		configure_serial_number
-		init_xpon
-	fi
-}
-
-stop_service() {
-	deinit_xpon
-}
-
-service_triggers() {
-	procd_add_reload_trigger "xpon"
-}

ponmngr/files/common/etc/uci-defaults/60-xpon-generate

@@ -1,17 +0,0 @@
-#!/bin/sh
-
-if [ -s "/etc/config/xpon" ]; then
-        if uci -q get xpon.ani >/dev/null; then
-                # return if there is any valid content
-                exit                                  
-        else                                          
-                rm -f /etc/config/xpon
-        fi                           
-fi                                   
-touch /etc/config/xpon
-                     
-                          
-uci set xpon.ani=ani
-uci set xpon.ani.enable="1"
-                                           
-uci commit xpon  

ponmngr/files/etc/init.d/pon

@@ -0,0 +1,36 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=ponmngr
+PROG="/usr/sbin/omcid start"
+
+include /lib/pon
+
+
+start_service() {
+       if [ -f "/etc/config/pon" ]; then
+		procd_open_instance $NAME
+		procd_set_param command ${PROG}
+		procd_set_param respawn
+		procd_close_instance
+                start_gpon
+       fi
+}
+
+boot() {
+        start
+}
+
+stop_service() {
+	service_stop ${PROG}
+        stop_gpon
+}
+
+reload_service() {
+        stop
+        start
+}
+

ponmngr/files/etc/uci-defaults/60-pon-generate

@@ -0,0 +1,27 @@
+#!/bin/sh
+
+basemac="$(db -q get hw.board.basemac | tr -d ':')"
+             
+if [ -s "/etc/config/pon" ]; then
+        if uci -q get pon.globals >/dev/null; then
+                # return if there is any valid content
+                exit                                  
+        else                                          
+                rm -f /etc/config/pon
+        fi                           
+fi                                   
+touch /etc/config/pon
+                     
+mac=''               
+if [ -z "$basemac" ]; then
+        mac="12345678"    
+else                      
+        # read last 8 characters of basemac without :
+        mac=${basemac: -8}                           
+fi                                                   
+                          
+uci set pon.globals=globals
+uci set pon.globals.enabled="1"
+uci set pon.globals.serial_number="BRCM$mac"
+                                           
+uci commit pon  

ponmngr/files/lib/pon/broadcom.sh

@@ -0,0 +1,70 @@
+#!/bin/sh
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+configure_snpwd() {
+        local serial_no password
+        serial_no="$1"
+        password="$2"
+
+        # serial number comprises of 2 parts, vendor id and vendor specific, the vendor id is
+        # a string while the vendor specific is a hex, so split the 2 and set accordingly
+        local vendor_id vendor_specific
+        vendor_id=${serial_no:0:4}
+        vendor_specific=${serial_no: -8}
+
+        # attempt to conver vendor_id from string to hex
+	vendor_id=$(echo $vendor_id | hexdump -e '4/1 "%02X" "\n"')
+	vendor_id=${vendor_id:0:8}
+
+        bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon onu_sn={vendor_id=$vendor_id,vendor_specific=$vendor_specific}
+        if [ -n "$password" ]; then
+		password=$(echo $password | hexdump -n ${#password} -e '16/1 "%02X""\n"')
+                bdmf_shell -c `cat /var/bdmf_sh_id` -cmd /b/configure gpon password=$password
+        fi
+}
+
+configure_gpon() {
+        local enabled serial_no password
+        config_load pon
+        config_get enabled globals "enabled"
+
+	if [ "$enabled" == "0" ]; then
+		exit
+        fi
+
+        config_get serial_no globals "serial_number"
+        config_get password globals "password"
+
+        configure_snpwd $serial_no $password
+}
+
+start_gpon() {
+        if [ -n "$(which gponctl)" ]; then
+                configure_gpon
+                gponctl start
+        fi
+}
+
+stop_gpon() {
+        if [ -n "$(which gponctl)" ]; then
+                gponctl stop
+        fi
+}
+
+get_gpon_status() {
+        json_init
+        status="$(gponctl getstate)"
+        admin_status="$(echo $status | head -n1 | awk '{print $8;}')"
+        json_add_string "admin_status" "$admin_status"
+        op_status="$(echo $status | head -n1 | awk '{print $12;}')"
+        case $op_status in
+        NUMBER)
+                op_status="$(echo $status | head -n1 | awk '{print $13;}')"
+                ;;
+        esac
+
+        op_status=${op_status:1:2}
+        json_add_string "operational_status" "$op_status"
+        json_dump
+}

ponmngr/files/usr/libexec/rpcd/pon

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+. /lib/functions.sh
+include /lib/pon
+
+case "$1" in
+	list)
+		echo '{ "status": {} }'
+		;;
+	call)
+		case "$2" in
+			status)
+				get_gpon_status
+				;;
+		esac
+		;;
+esac
+

port-management/files/etc/uci-defaults/15-ports-config-generate

@@ -30,25 +30,17 @@ populate_config_from_db() {
 }
 
 populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
+	for port in $(find /proc/device-tree/ -name "port@*"); do
+		port="$(cat $port/label)"
 		[ -n "$port" ] || continue
 		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
 		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
 		uci add ports ethport
 		uci rename ports.@ethport[-1]="$PORT"
 		uci set ports.@ethport[-1].enabled=1
 		uci set ports.@ethport[-1].name="$PORT"
 		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].speed=1000
 		uci set ports.@ethport[-1].duplex="full"
 		uci set ports.@ethport[-1].autoneg=1
 		uci set ports.@ethport[-1].eee=0
@@ -73,7 +65,7 @@ fi
 
 touch /etc/config/ports
 
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
+if [ -f /sbin/db ] && [ -f /etc/board-db/config/hw ]; then
 	populate_config_from_db
 elif [ -d /proc/device-tree/ ]; then
 	populate_config_from_device_tree

qosmngr/Makefile

@@ -27,7 +27,7 @@ define Package/qosmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=QoS Manager
-  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm||TARGET_iopsys_econet) +libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos
+  DEPENDS:=@(TARGET_iopsys_brcm63xx_arm) +libuci +libubox +libubus +libblobmsg-json +libjson-c +libqos
 endef
 
 define Package/qosmngr/description

qosmngr/files/lib/qos/broadcom.sh

@@ -4,18 +4,22 @@
 
 IP_RULE=""
 BR_RULE=""
-BR6_RULE=""
 
 POLICER_COUNT=0
+INTF_NAME=""
 Q_COUNT=0
-SP_Q_PRIO=7
+ITER=0
+PREV_ORDER=""
+CURR_ORDER=""
+MAX_ORDER=""
+
 
 # Function to handle a queue order and
 # update total number of queues
 handle_q_order() {
-	local qid="$1" #queue section ID
+	qid="$1" #queue section ID
 
-	config_get is_enable "$qid" "enable" 1
+	config_get is_enable "$qid" "enable"
 
 	# No need to configure disabled queues
 	if [ $is_enable == '0' ]; then
@@ -31,7 +35,7 @@ handle_q_order() {
 	# Create precedence file containing queue order per
 	# interface.
 	local precedence_file="/tmp/qos/$ifname/q_order"
-	local q_no=$(cat /tmp/qos/$ifname/q_idx)
+	local q_no=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
 
 	config_get precedence "$qid" "precedence"
 	value=${precedence}_q${q_no}
@@ -39,32 +43,71 @@ handle_q_order() {
 
 	# Update the number of queues per interface.
 	q_no=$((q_no + 1))
-	echo $q_no > /tmp/qos/$ifname/q_idx
+	echo $q_no > /tmp/qos/queue_stats/$ifname/q_idx
 }
 
-# Sort queue, lower value in uci means higher precedence, so this
-# function sorts the precedence in decending order
-sort_q_by_precedence() {
+# Function to check if values are greater than (total number
+# of queue -1) and map them to corresponding value.
+configure_precedence_to_file() {
+	order="$1"
+	line="$2"
+	order_file="$3"
+
+	if [ $order == "$PREV_ORDER" ]; then
+		queue_id=${line#*_}
+		val=${CURR_ORDER}_${queue_id}
+		echo $val >> $order_file
+	else
+		PREV_ORDER=$order
+		queue_id=${line#*_}
+		val=${MAX_ORDER}_${queue_id}
+		echo $val >> $order_file
+		CURR_ORDER=$MAX_ORDER
+		MAX_ORDER=$((MAX_ORDER - 1))
+	fi
+}
+
+# Fucntion to map queue precedence per interface
+# ranging from 1-X to 0-(no of queues -1)
+map_queue_precedence() {
 	ifname="$1"
+	total_q=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
+	q_no=`expr $total_q - 1`
 
+	MAX_ORDER=$q_no
+
+	local precedence_file="/tmp/qos/$ifname/q_precedence"
 	local order_file="/tmp/qos/$ifname/q_order"
-	local tmp_order_file="/tmp/qos/$ifname/q_order.tmp"
 
-	sort -n -k1 $order_file > $tmp_order_file
-	cp $tmp_order_file $order_file
-	rm -f $tmp_order_file
+	sort -n -r -k1 $order_file >> $precedence_file
+	rm $order_file
+
+	while read line
+	do
+		order=${line%_*}
+		if [ $order  -gt $q_no ]; then
+			ITER=$((ITER + 1))
+			configure_precedence_to_file $order $line $order_file
+		else
+			if [ $ITER == '0' ]; then
+				echo $line >> $order_file
+			else
+				configure_precedence_to_file $order $line $order_file
+			fi
+		fi
+
+	done < $precedence_file
 }
 
-sort_by_precedence() {
+map_precedence() {
 	for interf in $(db -q get hw.board.ethernetPortOrder); do
-		sort_q_by_precedence $interf
+		map_queue_precedence $interf
 	done
 }
 
 # function to handle a queue section
 handle_queue() {
-	local qid="$1" #queue section ID
-	local intf_name="$2"
+	qid="$1" #queue section ID
 
 	config_get is_enable "$qid" "enable"
 
@@ -80,35 +123,33 @@ handle_queue() {
 	fi
 
 	# This is to get the qid per interface.
-	if [ "$intf_name" != "$ifname" ]; then
-		return
+	if [ "$INTF_NAME" == $ifname ]; then
+		Q_COUNT=$((Q_COUNT + 1))
+	else
+		Q_COUNT='0'
 	fi
 
-	local precedence_file="/tmp/qos/$ifname/q_order"
+	INTF_NAME=$ifname
 
-	local temp_order=0
-	while read -r line; do
-		line_qid=${line: -1}
-		if [ "$line_qid" == "$Q_COUNT" ]; then
-			break
-		fi
-		temp_order=$((temp_order + 1))
-	done < "$precedence_file"
+	local total_q=$(cat /tmp/qos/queue_stats/$ifname/q_idx)
+	q_no=`expr $total_q - 1` local
+	precedence_file="/tmp/qos/$ifname/q_order"
 
-	# for sp queue, no matter what the precedence value is configured in the uci file
-	# broadcom recommends that the highest precedence queue should have priority value
-	#7, the next priority q 6 and so on.
-	# Here, we have the index of the queue when sorted by precedence value in the file
-	# precedence_file so the order is calculated accordingly.
-	local order=`expr $SP_Q_PRIO - $temp_order`
+	# TR181 suggests lower the precedence value higher the priority
+	# but in the chip its the opposite ie lower the value, lower
+	# the priority of queue on this chip. So we need to reverse the
+	# precedence value.
+	precedence="$(grep -i q${Q_COUNT} $precedence_file)"
+	precedence=${precedence%_*}
+	order=`expr $q_no - $precedence`
 
 	config_get sc_alg "$qid" "scheduling"
-	config_get wgt "$qid" "weight" 1
+	config_get wgt "$qid" "weight"
 	config_get rate "$qid" "rate"
 	config_get bs "$qid" "burst_size"
 	config_get qsize "$qid" "queue_size" 1024
 
-	local salg=1
+	salg=1
 
 	case "$sc_alg" in
 		"SP") salg=1
@@ -121,15 +162,31 @@ handle_queue() {
 		;;
 	esac
 
-	# ignore precedence value in case of WRR, broadcom recommends that WRR queue should
-	# always have precedence value set to 0
+	# ignore precedence value in case of WRR
 	if [ $salg -eq 2 ]; then
 	       order=0
 	fi
 
 	# Call tmctl which is a broadcomm command to configure queues on a port.
 	tmctl setqcfg --devtype 0 --if $ifname --qid $Q_COUNT --priority $order --qsize $qsize --weight $wgt --schedmode $salg --shapingrate $rate --burstsize $bs
-	Q_COUNT=$((Q_COUNT + 1))
+
+	# In BCM968 chips, the counters for queues are read, on other model, its read and reset. So, to maintain counter
+	# value and uniform behaviour, we are storing counter value for each queue in files
+	local d_name="/tmp/qos/queue_stats/${ifname}/q_${Q_COUNT}"
+	mkdir $d_name
+	local f_name="$d_name/txPackets"
+	touch $f_name
+	echo 0 > $f_name
+	f_name="$d_name/txBytes"
+	touch $f_name
+	echo 0 > $f_name
+	f_name="$d_name/droppedPackets"
+	touch $f_name
+	echo 0 > $f_name
+	f_name="$d_name/droppedBytes"
+	touch $f_name
+	echo 0 > $f_name
+
 }
 
 #function to handle a policer section
@@ -234,7 +291,6 @@ flush_chains() {
 
 init_broute_rule() {
 	BR_RULE=""
-	BR6_RULE=""
 }
 
 broute_filter_on_src_if() {
@@ -270,82 +326,6 @@ broute_filter_on_ether_type() {
 	BR_RULE="$BR_RULE --proto $1"
 }
 
-broute_filter_on_ether_type6() {
-	BR6_RULE="$BR6_RULE --proto IPv6"
-}
-
-ebt_match_src_ip() {
-        BR_RULE="$BR_RULE --ip-src $1"
-}
-
-ebt_match_dst_ip() {
-        BR_RULE="$BR_RULE --ip-dst $1"
-}
-
-ebt_match_ipv6_src_ip() {
-        BR_RULE="$BR_RULE --ip6-src $1"
-}
-
-ebt_match_ipv6_dst_ip() {
-        BR_RULE="$BR_RULE --ip6-dst $1"
-}
-
-ebt_match_ip_src_port() {
-        BR_RULE="$BR_RULE --ip-source-port $1"
-}
-
-ebt_match_ip_dst_port() {
-        BR_RULE="$BR_RULE --ip-destination-port $1"
-}
-
-ebt_match_ipv6_src_port() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed so update BR6_RULE string as well otherwise
-	#update BR_RULE only for installation of ipv6 proto rule only.
-	if [ ! -z "$BR6_RULE" ]; then
-		BR6_RULE="$BR6_RULE --ip6-source-port $1"
-	else
-		BR_RULE="$BR_RULE --ip6-source-port $1"
-	fi
-}
-
-ebt_match_ipv6_dst_port() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed so update BR6_RULE string as well otherwise
-	#update BR_RULE only for installation of ipv6 proto rule only.
-	if [ ! -z "$BR6_RULE" ]; then
-		BR6_RULE="$BR6_RULE --ip6-destination-port $1"
-	else
-		BR_RULE="$BR_RULE --ip6-destination-port $1"
-	fi
-}
-
-ebt_match_ip_protocol() {
-        BR_RULE="$BR_RULE --ip-proto $1"
-}
-
-ebt_match_ipv6_protocol() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed so update BR6_RULE string as well otherwise
-	#update BR_RULE only for installation of ipv6 proto rule only.
-	if [ ! -z "$BR6_RULE" ]; then
-		BR6_RULE="$BR6_RULE --ip6-proto $1"
-	else
-		BR_RULE="$BR_RULE --ip6-proto $1"
-	fi
-}
-
-ebt_match_ipv6_dscp() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed so update BR6_RULE string as well otherwise
-	#update BR_RULE only for installation of ipv6 proto rule only.
-	if [ ! -z "$BR6_RULE" ]; then
-		BR6_RULE="$BR6_RULE --ip6-tclass $1"
-	else
-		BR_RULE="$BR_RULE --ip6-tclass $1"
-	fi
-}
-
 broute_filter_on_dscp() {
 	# The broadcom option --ip-dscp-extend actually accepts tos
 	# and not dscp and that too in hex, hence, perform the conversion
@@ -372,145 +352,11 @@ broute_filter_on_vid() {
 }
 
 broute_rule_set_traffic_class() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed so update BR6_RULE string as well otherwise
-	#update BR_RULE only for installation of ipv6 proto rule only.
 	BR_RULE="$BR_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
-	if [ ! -z "$BR6_RULE" ]; then
-		BR6_RULE="$BR6_RULE -j mark --mark-or 0x$1 --mark-target ACCEPT"
-	fi
 }
 
 broute_append_rule() {
-	#when ethertype is not configured by user then both proto rules of ipv4
-	#and ipv6 to be installed otherwise install ipv6 proto rule only.
 	echo "ebtables -t broute -A qos $BR_RULE" >> /tmp/qos/classify.ebtables
-	if [ -n "$BR6_RULE" ]; then
-		echo "ebtables -t broute -A qos $BR6_RULE" >> /tmp/qos/classify.ebtables
-	fi
-}
-
-set_ip_addr()
-{
-        local cid=$1
-        local match_src_ip_func=$2
-        local match_dst_ip_func=$3
-
-        config_get src_ip "$cid" "src_ip"
-        config_get dst_ip "$cid" "dest_ip"
-
-        if [ ! -z "$src_ip" ]; then
-                $match_src_ip_func "$src_ip"
-        fi
-
-        if [ ! -z "$dst_ip" ]; then
-                $match_dst_ip_func "$dst_ip"
-        fi
-}
-
-set_ports()
-{
-        local cid=$1
-        local match_src_port_func=$2
-        local match_dst_port_func=$3
-	local src_port=""
-	local dst_port=""
-	local src_port_range=""
-	local dst_port_range=""
-
-        config_get src_port "$cid" "src_port"
-        config_get dst_port "$cid" "dest_port"
-        config_get src_port_range "$cid" "src_port_range"
-        config_get dst_port_range "$cid" "dest_port_range"
-
-        if ! [ -z $src_port ] && ! [ -z $src_port_range ]; then
-                $match_src_port_func "$src_port:$src_port_range"
-        elif [ ! -z $src_port ]; then
-                $match_src_port_func $src_port
-        fi
-
-        if ! [ -z $dst_port ] && ! [ -z $dst_port_range ]; then
-                $match_dst_port_func "$dst_port:$dst_port_range"
-        elif [ ! -z $dst_port ]; then
-                $match_dst_port_func $dst_port
-	fi
-}
-
-protocol_string_to_num()
-{
-        local value=-1
-
-        case "$1" in
-		*[0-9]*)	value="$1"
-                ;;
-                TCP|tcp)        value=6
-                ;;
-                UDP|udp)        value=17
-                ;;
-                ICMP|icmp)      value=1
-                ;;
-                ICMPv6|icmpv6)  value=58
-                ;;
-                IGMP|igmp)      value=2
-                ;;
-                SCTP|sctp)      value=132
-                ;;
-                *) value=-1
-                ;;
-        esac
-        echo $value
-}
-
-broute_ipv4_rule_options()
-{
-	local cid=$1
-	config_get protocol "$cid" "proto"
-	config_get dscp_filter "$cid" "dscp_filter"
-
-	set_ip_addr $cid ebt_match_src_ip ebt_match_dst_ip
-
-	if [ ! -z $dscp_filter ]; then
-		broute_filter_on_dscp "$dscp_filter"
-	fi
-
-	if [ ! -z $protocol ]; then
-		local proto_num=$(protocol_string_to_num "$protocol")
-		ebt_match_ip_protocol "$proto_num"
-
-		#port installation for protol tcp/udp/sctp
-		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ] ; then
-			set_ports "$cid" ebt_match_ip_src_port ebt_match_ip_dst_port
-		fi
-	fi
-}
-
-broute_ipv6_rule_options()
-{
-	local cid=$1
-
-	config_get protocol "$cid" "proto"
-	config_get dscp_filter "$cid" "dscp_filter"
-
-	set_ip_addr $cid ebt_match_ipv6_src_ip ebt_match_ipv6_dst_ip
-
-	if [ ! -z $dscp_filter ]; then
-		local tos_val
-		local tos_hex
-
-		tos_val=$(($dscp_filter<<2))
-		tos_hex=$(printf "%x" $tos_val)
-		ebt_match_ipv6_dscp "$tos_hex"
-	fi
-
-	if [ ! -z $protocol ]; then
-		local proto_num=$(protocol_string_to_num "$protocol")
-		ebt_match_ipv6_protocol "$proto_num"
-
-		#port installation for protol tcp/udp/sctp
-		if [ $proto_num = "6" ] || [ $proto_num = "17" ] || [ $proto_num = "132" ]; then
-			set_ports "$cid" ebt_match_ipv6_src_port ebt_match_ipv6_dst_port
-		fi
-	fi
 }
 
 handle_ebtables_rules() {
@@ -518,8 +364,6 @@ handle_ebtables_rules() {
 	local is_l2_rule=0
 	local src_dhcp_options=""
 	local dst_dhcp_options=""
-	local protocol=""
-	local ip_version=""
 
 	init_broute_rule
 
@@ -537,9 +381,8 @@ handle_ebtables_rules() {
 	config_get dst_clid "$sid" "dst_client_id" # dhcp option 61
 	config_get src_ucid "$sid" "src_user_class_id" # dhcp option 77
 	config_get dst_ucid "$sid" "dst_user_class_id" # dhcp option 77
-	config_get traffic_class "$sid" "traffic_class"
-	config_get protocol "$sid" "proto"
 
+	config_get traffic_class "$sid" "traffic_class"
 
 	if [ -n "$src_if" ]; then
 		for interf in $(db -q get hw.board.ethernetPortOrder); do
@@ -566,6 +409,13 @@ handle_ebtables_rules() {
 		is_l2_rule=1
 	fi
 
+	if [ -n "$dscp_filter" ]; then
+		# filter on ethertype and proto is same thing
+		broute_filter_on_ether_type IPv4
+		broute_filter_on_dscp $dscp_filter
+		is_l2_rule=1
+	fi
+
 	if [ -n "$eth_type" ]; then
 		broute_filter_on_ether_type $eth_type
 		is_l2_rule=1
@@ -576,47 +426,6 @@ handle_ebtables_rules() {
 		is_l2_rule=1
 	fi
 
-	case $eth_type in
-	IPv4|IPV4|0800)
-			ip_version=4
-		;;
-	IPv6|IPV6|86DD)
-			ip_version=6
-		;;
-	*)
-		if [ -z "$eth_type" ]; then
-			case $src_ip$dest_ip in
-			*.*)
-				ip_version=4
-				broute_filter_on_ether_type "IPv4"
-				;;
-			*:*)
-				ip_version=6
-				broute_filter_on_ether_type "IPv6"
-				;;
-			*)
-				if [ -n "$protocol" ] || [ -n "$dscp_filter" ]; then
-					ip_version=1 #neither ether_type nor ip address used
-					#ethertype is not configured by user so install 
-					#both proto ipv4 and ipv6 rule
-					BR6_RULE="$BR_RULE"
-					broute_filter_on_ether_type "IPv4"
-					broute_filter_on_ether_type6 "IPv6"
-				fi
-			esac
-		fi
-	esac
-
-	if [ $ip_version = "4" ] || [ $ip_version = "1" ]; then
-		broute_ipv4_rule_options "$sid"
-		is_l2_rule=1
-	fi
-
-	if [ $ip_version = "6" ] || [ $ip_version = "1" ]; then
-		broute_ipv6_rule_options "$sid"
-		is_l2_rule=1
-	fi
-
 	# first process options that will help figure our source mac address
 	# dhcp option for "vendor class id"
 	if [ -n "$src_vcid" ]; then
@@ -1034,20 +843,23 @@ configure_classify() {
 
 pre_configure_queue() {
 	# Delete queues
+	rm -rf /tmp/qos/queue_stats
+
 	for intf in $(db get hw.board.ethernetPortOrder); do
 		rm -rf /tmp/qos/$intf
 
-		mkdir -p /tmp/qos/$intf
-		touch /tmp/qos/$intf/q_order
-		touch /tmp/qos/$intf/q_idx
-		echo 0 > /tmp/qos/$intf/q_idx
-
-		tmctl porttminit --devtype 0 --if $intf --numqueues 8
-
+		mkdir -p /tmp/qos/queue_stats/$intf
+		touch /tmp/qos/queue_stats/$intf/q_idx
+		echo 0 > /tmp/qos/queue_stats/$intf/q_idx
 		i=0
 		for i in 0 1 2 3 4 5 6 7; do
 			tmctl delqcfg --devtype 0 --if $intf --qid $i &>/dev/null
 		done
+		tmctl porttminit --devtype 0 --if $intf --flag 0 --numqueues 8
+
+		mkdir -p /tmp/qos/$intf
+		touch /tmp/qos/$intf/q_order
+		touch /tmp/qos/$intf/q_precedence
 	done
 }
 
@@ -1055,15 +867,8 @@ configure_queue() {
 	# Load UCI file
 	config_load qos
 	config_foreach handle_q_order queue
-	sort_by_precedence
-	for interf in $(db -q get hw.board.ethernetPortOrder); do
-		Q_COUNT=0
-		# sp queue have max priority value = no. of queue configured on the port
-		# hence read and update SP_Q_PRIO here
-		local q_no=$(cat /tmp/qos/$interf/q_idx)
-		SP_Q_PRIO=`expr $q_no - 1`
-		config_foreach handle_queue queue $interf
-	done
+	map_precedence
+	config_foreach handle_queue queue
 }
 
 configure_policer() {

questd/Makefile

@@ -1,20 +1,21 @@
 #
-# Copyright (C) 2013-2022 iopsys
+# Copyright (C) 2013-2020 iopsys
 #
 
 include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=questd
-PKG_VERSION:=5.2.4
+PKG_VERSION:=5.2.3
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_VERSION:=cf54bd65ec821ac67f3aa1caeebcd3ea9aae07ad
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
-PKG_SOURCE_VERSION:=2ca3ae0c29dcbbf01282f6118eb8d5e5bc9a1c45
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
@@ -22,6 +23,8 @@ PKG_LICENSE_FILES:=LICENSE
 include $(INCLUDE_DIR)/package.mk
 include $(INCLUDE_DIR)/cmake.mk
 
+PKG_INSTALL:=
+
 define Package/questd
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +ubus +libpthread
@@ -33,13 +36,6 @@ define Package/questd/description
 	this information via ubus
 endef
 
-ifeq ($(LOCAL_DEV),1)
-CMAKE_OPTIONS:=-DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
-define Build/Prepare
-	$(CP) -rf ~/git/code/questd/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Package/questd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/sbin

rulengd/Makefile

@@ -1,22 +1,23 @@
 #
-# Copyright (C) 2018-2022 iopsys
+# Copyright (C) 2018 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=rulengd
-PKG_VERSION:=1.2.7
+PKG_VERSION:=1.2.6
 PKG_RELEASE:=1
+PKG_BUILD_PARALLEL:=1
+PKG_INSTALL:=1
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/rulengd.git
-PKG_SOURCE_VERSION:=1f247e1afc845f47348febffa55fe40d8b552737
+PKG_SOURCE_VERSION:=e323bebe85cd7fb4eeb6cee535188227bc9b81e3
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
-
+PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
+PKG_INSTALL:=1
+PKG_BUILD_PARALLEL:=1
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
@@ -34,14 +35,6 @@ define Package/rulengd/description
 	rulengd listens for events and executes speficied methods if the incoming event arguments contain speficied ones.
 endef
 
-#CMAKE_OPTIONS:=-DCMAKE_VERBOSE_MAKEFILE:BOOL=ON
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/code/rulengd/* $(PKG_BUILD_DIR)/
-endef
-endif
-
 define Package/rulengd/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/bin

shflags/Makefile

@@ -0,0 +1,51 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=shflags
+PKG_VERSION:=2012-06-11
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/kward/shflags.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=c12b30cebb92b49c5edb6df255c0952c65b4ddc6
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_LICENSE:=LGPL-2.1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/shflags
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=shflags
+  DEPENDS:=+getopt
+  URL:=http://code.google.com/p/shflags/
+  MAINTAINER:=Luka Perkov <luka@openwrt.org>
+endef
+
+define Package/shflags/description
+ command-line flags module for Unix shell scripts
+endef
+
+define Build/Configure
+endef
+
+define Build/Compile
+endef
+
+define Build/Install
+endef
+
+define Package/shflags/install
+	$(INSTALL_DIR) $(1)/usr/share/shflags
+	$(CP) $(PKG_BUILD_DIR)/source/1.0/src/shflags  $(1)/usr/share/shflags/shflags.sh
+endef
+
+$(eval $(call BuildPackage,shflags))

shflags/patches/000-strip.patch

@@ -0,0 +1,763 @@
+--- a/source/1.0/src/shflags
++++ b/source/1.0/src/shflags
+@@ -1,91 +1,10 @@
+-# $Id$
+-# vim:et:ft=sh:sts=2:sw=2
+-#
+-# Copyright 2008 Kate Ward. All Rights Reserved.
+-# Released under the LGPL (GNU Lesser General Public License)
+-#
+-# shFlags -- Advanced command-line flag library for Unix shell scripts.
+-# http://code.google.com/p/shflags/
+-#
+-# Author: kate.ward@forestent.com (Kate Ward)
+-#
+-# This module implements something like the google-gflags library available
+-# from http://code.google.com/p/google-gflags/.
+-#
+-# FLAG TYPES: This is a list of the DEFINE_*'s that you can do.  All flags take
+-# a name, default value, help-string, and optional 'short' name (one-letter
+-# name).  Some flags have other arguments, which are described with the flag.
+-#
+-# DEFINE_string: takes any input, and intreprets it as a string.
+-#
+-# DEFINE_boolean: typically does not take any argument: say --myflag to set
+-#   FLAGS_myflag to true, or --nomyflag to set FLAGS_myflag to false.
+-#   Alternately, you can say
+-#     --myflag=true  or --myflag=t or --myflag=0  or
+-#     --myflag=false or --myflag=f or --myflag=1
+-#   Passing an option has the same affect as passing the option once.
+-#
+-# DEFINE_float: takes an input and intreprets it as a floating point number. As
+-#   shell does not support floats per-se, the input is merely validated as
+-#   being a valid floating point value.
+-#
+-# DEFINE_integer: takes an input and intreprets it as an integer.
+-#
+-# SPECIAL FLAGS: There are a few flags that have special meaning:
+-#   --help (or -?)  prints a list of all the flags in a human-readable fashion
+-#   --flagfile=foo  read flags from foo.  (not implemented yet)
+-#   --              as in getopt(), terminates flag-processing
+-#
+-# EXAMPLE USAGE:
+-#
+-#   -- begin hello.sh --
+-#   #! /bin/sh
+-#   . ./shflags
+-#   DEFINE_string name 'world' "somebody's name" n
+-#   FLAGS "$@" || exit $?
+-#   eval set -- "${FLAGS_ARGV}"
+-#   echo "Hello, ${FLAGS_name}."
+-#   -- end hello.sh --
+-#
+-#   $ ./hello.sh -n Kate
+-#   Hello, Kate.
+-#
+-# NOTE: Not all systems include a getopt version that supports long flags. On
+-# these systems, only short flags are recognized.
+-
+-#==============================================================================
+-# shFlags
+-#
+-# Shared attributes:
+-#   flags_error: last error message
+-#   flags_return: last return value
+-#
+-#   __flags_longNames: list of long names for all flags
+-#   __flags_shortNames: list of short names for all flags
+-#   __flags_boolNames: list of boolean flag names
+-#
+-#   __flags_opts: options parsed by getopt
+-#
+-# Per-flag attributes:
+-#   FLAGS_<flag_name>: contains value of flag named 'flag_name'
+-#   __flags_<flag_name>_default: the default flag value
+-#   __flags_<flag_name>_help: the flag help string
+-#   __flags_<flag_name>_short: the flag short name
+-#   __flags_<flag_name>_type: the flag type
+-#
+-# Notes:
+-# - lists of strings are space separated, and a null value is the '~' char.
+-
+-# return if FLAGS already loaded
+ [ -n "${FLAGS_VERSION:-}" ] && return 0
+ FLAGS_VERSION='1.0.3'
+ 
+-# return values
+ FLAGS_TRUE=0
+ FLAGS_FALSE=1
+ FLAGS_ERROR=2
+ 
+-# reserved flag names
+ FLAGS_RESERVED='ARGC ARGV ERROR FALSE HELP PARENT RESERVED TRUE VERSION'
+ 
+ _flags_debug() { echo "flags:DEBUG $@" >&2; }
+@@ -93,7 +12,6 @@ _flags_warn() { echo "flags:WARN $@" >&2
+ _flags_error() { echo "flags:ERROR $@" >&2; }
+ _flags_fatal() { echo "flags:FATAL $@" >&2; }
+ 
+-# specific shell checks
+ if [ -n "${ZSH_VERSION:-}" ]; then
+   setopt |grep "^shwordsplit$" >/dev/null
+   if [ $? -ne ${FLAGS_TRUE} ]; then
+@@ -107,20 +25,15 @@ if [ -n "${ZSH_VERSION:-}" ]; then
+   fi
+ fi
+ 
+-#
+-# constants
+-#
+ 
+-# getopt version
+ __FLAGS_GETOPT_VERS_STD=0
+ __FLAGS_GETOPT_VERS_ENH=1
+ __FLAGS_GETOPT_VERS_BSD=2
+ 
+ getopt >/dev/null 2>&1
+ case $? in
+-  0) __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD} ;;  # bsd getopt
++  0) __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD} ;;
+   2)
+-    # TODO(kward): look into '-T' option to test the internal getopt() version
+     if [ "`getopt --version`" = '-- ' ]; then
+       __FLAGS_GETOPT_VERS=${__FLAGS_GETOPT_VERS_STD}
+     else
+@@ -133,82 +46,49 @@ case $? in
+     ;;
+ esac
+ 
+-# getopt optstring lengths
+ __FLAGS_OPTSTR_SHORT=0
+ __FLAGS_OPTSTR_LONG=1
+ 
+ __FLAGS_NULL='~'
+ 
+-# flag info strings
+ __FLAGS_INFO_DEFAULT='default'
+ __FLAGS_INFO_HELP='help'
+ __FLAGS_INFO_SHORT='short'
+ __FLAGS_INFO_TYPE='type'
+ 
+-# flag lengths
+ __FLAGS_LEN_SHORT=0
+ __FLAGS_LEN_LONG=1
+ 
+-# flag types
+ __FLAGS_TYPE_NONE=0
+ __FLAGS_TYPE_BOOLEAN=1
+ __FLAGS_TYPE_FLOAT=2
+ __FLAGS_TYPE_INTEGER=3
+ __FLAGS_TYPE_STRING=4
+ 
+-# set the constants readonly
+ __flags_constants=`set |awk -F= '/^FLAGS_/ || /^__FLAGS_/ {print $1}'`
+ for __flags_const in ${__flags_constants}; do
+-  # skip certain flags
+   case ${__flags_const} in
+     FLAGS_HELP) continue ;;
+     FLAGS_PARENT) continue ;;
+   esac
+-  # set flag readonly
+   if [ -z "${ZSH_VERSION:-}" ]; then
+     readonly ${__flags_const}
+-  else  # handle zsh
++  else
+     case ${ZSH_VERSION} in
+       [123].*) readonly ${__flags_const} ;;
+-      *) readonly -g ${__flags_const} ;;  # declare readonly constants globally
++      *) readonly -g ${__flags_const} ;;
+     esac
+   fi
+ done
+ unset __flags_const __flags_constants
+ 
+-#
+-# internal variables
+-#
+-
+-__flags_boolNames=' '  # space separated list of boolean flag names
+-__flags_longNames=' '  # space separated list of long flag names
+-__flags_shortNames=' '  # space separated list of short flag names
+-
+-__flags_columns=''  # screen width in columns
+-__flags_opts=''  # temporary storage for parsed getopt flags
+-
+-#------------------------------------------------------------------------------
+-# private functions
+-#
+-
+-# Define a flag.
+-#
+-# Calling this function will define the following info variables for the
+-# specified flag:
+-#   FLAGS_flagname - the name for this flag (based upon the long flag name)
+-#   __flags_<flag_name>_default - the default value
+-#   __flags_flagname_help - the help string
+-#   __flags_flagname_short - the single letter alias
+-#   __flags_flagname_type - the type of flag (one of __FLAGS_TYPE_*)
+-#
+-# Args:
+-#   _flags__type: integer: internal type of flag (__FLAGS_TYPE_*)
+-#   _flags__name: string: long flag name
+-#   _flags__default: default flag value
+-#   _flags__help: string: help string
+-#   _flags__short: string: (optional) short flag name
+-# Returns:
+-#   integer: success of operation, or error
++
++__flags_boolNames=' '
++__flags_longNames=' '
++__flags_shortNames=' '
++__flags_columns=''
++__flags_opts=''
++
+ _flags_define()
+ {
+   if [ $# -lt 4 ]; then
+@@ -226,16 +106,13 @@ _flags_define()
+ 
+   _flags_return_=${FLAGS_TRUE}
+ 
+-  # TODO(kward): check for validity of the flag name (e.g. dashes)
+ 
+-  # check whether the flag name is reserved
+   echo " ${FLAGS_RESERVED} " |grep " ${_flags_name_} " >/dev/null
+   if [ $? -eq 0 ]; then
+     flags_error="flag name (${_flags_name_}) is reserved"
+     _flags_return_=${FLAGS_ERROR}
+   fi
+ 
+-  # require short option for getopt that don't support long options
+   if [ ${_flags_return_} -eq ${FLAGS_TRUE} \
+       -a ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} \
+       -a "${_flags_short_}" = "${__FLAGS_NULL}" ]
+@@ -244,7 +121,6 @@ _flags_define()
+     _flags_return_=${FLAGS_ERROR}
+   fi
+ 
+-  # check for existing long name definition
+   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
+     if _flags_itemInList "${_flags_name_}" \
+         ${__flags_longNames} ${__flags_boolNames}
+@@ -255,7 +131,6 @@ _flags_define()
+     fi
+   fi
+ 
+-  # check for existing short name definition
+   if [ ${_flags_return_} -eq ${FLAGS_TRUE} \
+       -a "${_flags_short_}" != "${__FLAGS_NULL}" ]
+   then
+@@ -266,9 +141,6 @@ _flags_define()
+     fi
+   fi
+ 
+-  # handle default value. note, on several occasions the 'if' portion of an
+-  # if/then/else contains just a ':' which does nothing. a binary reversal via
+-  # '!' is not done because it does not work on all shells.
+   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
+     case ${_flags_type_} in
+       ${__FLAGS_TYPE_BOOLEAN})
+@@ -301,7 +173,7 @@ _flags_define()
+         fi
+         ;;
+ 
+-      ${__FLAGS_TYPE_STRING}) ;;  # everything in shell is a valid string
++      ${__FLAGS_TYPE_STRING}) ;;
+ 
+       *)
+         flags_error="unrecognized flag type '${_flags_type_}'"
+@@ -311,7 +183,6 @@ _flags_define()
+   fi
+ 
+   if [ ${_flags_return_} -eq ${FLAGS_TRUE} ]; then
+-    # store flag information
+     eval "FLAGS_${_flags_name_}='${_flags_default_}'"
+     eval "__flags_${_flags_name_}_${__FLAGS_INFO_TYPE}=${_flags_type_}"
+     eval "__flags_${_flags_name_}_${__FLAGS_INFO_DEFAULT}=\
+@@ -319,7 +190,6 @@ _flags_define()
+     eval "__flags_${_flags_name_}_${__FLAGS_INFO_HELP}=\"${_flags_help_}\""
+     eval "__flags_${_flags_name_}_${__FLAGS_INFO_SHORT}='${_flags_short_}'"
+ 
+-    # append flag name(s) to list of names
+     __flags_longNames="${__flags_longNames}${_flags_name_} "
+     __flags_shortNames="${__flags_shortNames}${_flags_short_} "
+     [ ${_flags_type_} -eq ${__FLAGS_TYPE_BOOLEAN} ] && \
+@@ -333,17 +203,6 @@ _flags_define()
+   return ${flags_return}
+ }
+ 
+-# Return valid getopt options using currently defined list of long options.
+-#
+-# This function builds a proper getopt option string for short (and long)
+-# options, using the current list of long options for reference.
+-#
+-# Args:
+-#   _flags_optStr: integer: option string type (__FLAGS_OPTSTR_*)
+-# Output:
+-#   string: generated option string for getopt
+-# Returns:
+-#   boolean: success of operation (always returns True)
+ _flags_genOptStr()
+ {
+   _flags_optStrType_=$1
+@@ -358,7 +217,6 @@ _flags_genOptStr()
+             ${_flags_flag_} ${__FLAGS_INFO_SHORT}`
+         if [ "${_flags_shortName_}" != "${__FLAGS_NULL}" ]; then
+           _flags_opts_="${_flags_opts_}${_flags_shortName_}"
+-          # getopt needs a trailing ':' to indicate a required argument
+           [ ${_flags_type_} -ne ${__FLAGS_TYPE_BOOLEAN} ] && \
+               _flags_opts_="${_flags_opts_}:"
+         fi
+@@ -366,7 +224,6 @@ _flags_genOptStr()
+ 
+       ${__FLAGS_OPTSTR_LONG})
+         _flags_opts_="${_flags_opts_:+${_flags_opts_},}${_flags_flag_}"
+-        # getopt needs a trailing ':' to indicate a required argument
+         [ ${_flags_type_} -ne ${__FLAGS_TYPE_BOOLEAN} ] && \
+             _flags_opts_="${_flags_opts_}:"
+         ;;
+@@ -379,15 +236,6 @@ _flags_genOptStr()
+   return ${FLAGS_TRUE}
+ }
+ 
+-# Returns flag details based on a flag name and flag info.
+-#
+-# Args:
+-#   string: long flag name
+-#   string: flag info (see the _flags_define function for valid info types)
+-# Output:
+-#   string: value of dereferenced flag variable
+-# Returns:
+-#   integer: one of FLAGS_{TRUE|FALSE|ERROR}
+ _flags_getFlagInfo()
+ {
+   _flags_name_=$1
+@@ -399,13 +247,6 @@ _flags_getFlagInfo()
+   if [ -n "${_flags_value_}" ]; then
+     flags_return=${FLAGS_TRUE}
+   else
+-    # see if the _flags_name_ variable is a string as strings can be empty...
+-    # note: the DRY principle would say to have this function call itself for
+-    # the next three lines, but doing so results in an infinite loop as an
+-    # invalid _flags_name_ will also not have the associated _type variable.
+-    # Because it doesn't (it will evaluate to an empty string) the logic will
+-    # try to find the _type variable of the _type variable, and so on. Not so
+-    # good ;-)
+     _flags_typeVar_="__flags_${_flags_name_}_${__FLAGS_INFO_TYPE}"
+     _flags_strToEval_="_flags_type_=\"\${${_flags_typeVar_}:-}\""
+     eval "${_flags_strToEval_}"
+@@ -424,15 +265,6 @@ _flags_getFlagInfo()
+   return ${flags_return}
+ }
+ 
+-# check for presense of item in a list. passed a string (e.g. 'abc'), this
+-# function will determine if the string is present in the list of strings (e.g.
+-# ' foo bar abc ').
+-#
+-# Args:
+-#   _flags__str: string: string to search for in a list of strings
+-#   unnamed: list: list of strings
+-# Returns:
+-#   boolean: true if item is in the list
+ _flags_itemInList()
+ {
+   _flags_str_=$1
+@@ -449,34 +281,22 @@ _flags_itemInList()
+   return ${flags_return}
+ }
+ 
+-# Returns the width of the current screen.
+-#
+-# Output:
+-#   integer: width in columns of the current screen.
+ _flags_columns()
+ {
+   if [ -z "${__flags_columns}" ]; then
+-    # determine the value and store it
+     if eval stty size >/dev/null 2>&1; then
+-      # stty size worked :-)
+       set -- `stty size`
+       __flags_columns=$2
+     elif eval tput cols >/dev/null 2>&1; then
+       set -- `tput cols`
+       __flags_columns=$1
+     else
+-      __flags_columns=80  # default terminal width
++      __flags_columns=80
+     fi
+   fi
+   echo ${__flags_columns}
+ }
+ 
+-# Validate a boolean.
+-#
+-# Args:
+-#   _flags__bool: boolean: value to validate
+-# Returns:
+-#   bool: true if the value is a valid boolean
+ _flags_validateBoolean()
+ {
+   _flags_bool_=$1
+@@ -492,12 +312,6 @@ _flags_validateBoolean()
+   return ${flags_return}
+ }
+ 
+-# Validate a float.
+-#
+-# Args:
+-#   _flags__float: float: value to validate
+-# Returns:
+-#   bool: true if the value is a valid float
+ _flags_validateFloat()
+ {
+   _flags_float_=$1
+@@ -507,10 +321,10 @@ _flags_validateFloat()
+   else
+     flags_return=${FLAGS_TRUE}
+     case ${_flags_float_} in
+-      -*)  # negative floats
++      -*)
+         _flags_test_=`expr "${_flags_float_}" : '\(-[0-9][0-9]*\.[0-9][0-9]*\)'`
+         ;;
+-      *)  # positive floats
++      *)
+         _flags_test_=`expr "${_flags_float_}" : '\([0-9][0-9]*\.[0-9][0-9]*\)'`
+         ;;
+     esac
+@@ -521,22 +335,16 @@ _flags_validateFloat()
+   return ${flags_return}
+ }
+ 
+-# Validate an integer.
+-#
+-# Args:
+-#   _flags__integer: interger: value to validate
+-# Returns:
+-#   bool: true if the value is a valid integer
+ _flags_validateInteger()
+ {
+   _flags_int_=$1
+ 
+   flags_return=${FLAGS_TRUE}
+   case ${_flags_int_} in
+-    -*)  # negative ints
++    -*)
+       _flags_test_=`expr "${_flags_int_}" : '\(-[0-9][0-9]*\)'`
+       ;;
+-    *)  # positive ints
++    *)
+       _flags_test_=`expr "${_flags_int_}" : '\([0-9][0-9]*\)'`
+       ;;
+   esac
+@@ -546,23 +354,12 @@ _flags_validateInteger()
+   return ${flags_return}
+ }
+ 
+-# Parse command-line options using the standard getopt.
+-#
+-# Note: the flag options are passed around in the global __flags_opts so that
+-# the formatting is not lost due to shell parsing and such.
+-#
+-# Args:
+-#   @: varies: command-line options to parse
+-# Returns:
+-#   integer: a FLAGS success condition
+ _flags_getoptStandard()
+ {
+   flags_return=${FLAGS_TRUE}
+   _flags_shortOpts_=`_flags_genOptStr ${__FLAGS_OPTSTR_SHORT}`
+ 
+-  # check for spaces in passed options
+   for _flags_opt_ in "$@"; do
+-    # note: the silliness with the x's is purely for ksh93 on Ubuntu 6.06
+     _flags_match_=`echo "x${_flags_opt_}x" |sed 's/ //g'`
+     if [ "${_flags_match_}" != "x${_flags_opt_}x" ]; then
+       flags_error='the available getopt does not support spaces in options'
+@@ -585,15 +382,6 @@ _flags_getoptStandard()
+   return ${flags_return}
+ }
+ 
+-# Parse command-line options using the enhanced getopt.
+-#
+-# Note: the flag options are passed around in the global __flags_opts so that
+-# the formatting is not lost due to shell parsing and such.
+-#
+-# Args:
+-#   @: varies: command-line options to parse
+-# Returns:
+-#   integer: a FLAGS success condition
+ _flags_getoptEnhanced()
+ {
+   flags_return=${FLAGS_TRUE}
+@@ -617,17 +405,6 @@ _flags_getoptEnhanced()
+   return ${flags_return}
+ }
+ 
+-# Dynamically parse a getopt result and set appropriate variables.
+-#
+-# This function does the actual conversion of getopt output and runs it through
+-# the standard case structure for parsing. The case structure is actually quite
+-# dynamic to support any number of flags.
+-#
+-# Args:
+-#   argc: int: original command-line argument count
+-#   @: varies: output from getopt parsing
+-# Returns:
+-#   integer: a FLAGS success condition
+ _flags_parseGetopt()
+ {
+   _flags_argc_=$1
+@@ -638,35 +415,26 @@ _flags_parseGetopt()
+   if [ ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} ]; then
+     set -- $@
+   else
+-    # note the quotes around the `$@' -- they are essential!
+     eval set -- "$@"
+   fi
+ 
+-  # provide user with number of arguments to shift by later
+-  # NOTE: the FLAGS_ARGC variable is obsolete as of 1.0.3 because it does not
+-  # properly give user access to non-flag arguments mixed in between flag
+-  # arguments. Its usage was replaced by FLAGS_ARGV, and it is being kept only
+-  # for backwards compatibility reasons.
+   FLAGS_ARGC=`expr $# - 1 - ${_flags_argc_}`
+ 
+-  # handle options. note options with values must do an additional shift
+   while true; do
+     _flags_opt_=$1
+     _flags_arg_=${2:-}
+     _flags_type_=${__FLAGS_TYPE_NONE}
+     _flags_name_=''
+ 
+-    # determine long flag name
+     case "${_flags_opt_}" in
+-      --) shift; break ;;  # discontinue option parsing
++      --) shift; break ;;
+ 
+-      --*)  # long option
++      --*)
+         _flags_opt_=`expr "${_flags_opt_}" : '--\(.*\)'`
+         _flags_len_=${__FLAGS_LEN_LONG}
+         if _flags_itemInList "${_flags_opt_}" ${__flags_longNames}; then
+           _flags_name_=${_flags_opt_}
+         else
+-          # check for negated long boolean version
+           if _flags_itemInList "${_flags_opt_}" ${__flags_boolNames}; then
+             _flags_name_=`expr "${_flags_opt_}" : 'no\(.*\)'`
+             _flags_type_=${__FLAGS_TYPE_BOOLEAN}
+@@ -675,12 +443,10 @@ _flags_parseGetopt()
+         fi
+         ;;
+ 
+-      -*)  # short option
++      -*)
+         _flags_opt_=`expr "${_flags_opt_}" : '-\(.*\)'`
+         _flags_len_=${__FLAGS_LEN_SHORT}
+         if _flags_itemInList "${_flags_opt_}" ${__flags_shortNames}; then
+-          # yes. match short name to long name. note purposeful off-by-one
+-          # (too high) with awk calculations.
+           _flags_pos_=`echo "${__flags_shortNames}" \
+               |awk 'BEGIN{RS=" ";rn=0}$0==e{rn=NR}END{print rn}' \
+                   e=${_flags_opt_}`
+@@ -690,14 +456,12 @@ _flags_parseGetopt()
+         ;;
+     esac
+ 
+-    # die if the flag was unrecognized
+     if [ -z "${_flags_name_}" ]; then
+       flags_error="unrecognized option (${_flags_opt_})"
+       flags_return=${FLAGS_ERROR}
+       break
+     fi
+ 
+-    # set new flag value
+     [ ${_flags_type_} -eq ${__FLAGS_TYPE_NONE} ] && \
+         _flags_type_=`_flags_getFlagInfo \
+             "${_flags_name_}" ${__FLAGS_INFO_TYPE}`
+@@ -746,7 +510,6 @@ _flags_parseGetopt()
+         ;;
+     esac
+ 
+-    # handle special case help flag
+     if [ "${_flags_name_}" = 'help' ]; then
+       if [ ${FLAGS_help} -eq ${FLAGS_TRUE} ]; then
+         flags_help
+@@ -756,12 +519,10 @@ _flags_parseGetopt()
+       fi
+     fi
+ 
+-    # shift the option and non-boolean arguements out.
+     shift
+     [ ${_flags_type_} != ${__FLAGS_TYPE_BOOLEAN} ] && shift
+   done
+ 
+-  # give user back non-flag arguments
+   FLAGS_ARGV=''
+   while [ $# -gt 0 ]; do
+     FLAGS_ARGV="${FLAGS_ARGV:+${FLAGS_ARGV} }'$1'"
+@@ -773,43 +534,18 @@ _flags_parseGetopt()
+   return ${flags_return}
+ }
+ 
+-#------------------------------------------------------------------------------
+-# public functions
+-#
+-
+-# A basic boolean flag. Boolean flags do not take any arguments, and their
+-# value is either 1 (false) or 0 (true). For long flags, the false value is
+-# specified on the command line by prepending the word 'no'. With short flags,
+-# the presense of the flag toggles the current value between true and false.
+-# Specifying a short boolean flag twice on the command results in returning the
+-# value back to the default value.
+-#
+-# A default value is required for boolean flags.
+-#
+-# For example, lets say a Boolean flag was created whose long name was 'update'
+-# and whose short name was 'x', and the default value was 'false'. This flag
+-# could be explicitly set to 'true' with '--update' or by '-x', and it could be
+-# explicitly set to 'false' with '--noupdate'.
++
+ DEFINE_boolean() { _flags_define ${__FLAGS_TYPE_BOOLEAN} "$@"; }
+ 
+-# Other basic flags.
+ DEFINE_float()   { _flags_define ${__FLAGS_TYPE_FLOAT} "$@"; }
+ DEFINE_integer() { _flags_define ${__FLAGS_TYPE_INTEGER} "$@"; }
+ DEFINE_string()  { _flags_define ${__FLAGS_TYPE_STRING} "$@"; }
+ 
+-# Parse the flags.
+-#
+-# Args:
+-#   unnamed: list: command-line flags to parse
+-# Returns:
+-#   integer: success of operation, or error
+ FLAGS()
+ {
+-  # define a standard 'help' flag if one isn't already defined
+   [ -z "${__flags_help_type:-}" ] && \
+       DEFINE_boolean 'help' false 'show this help' 'h'
+ 
+-  # parse options
+   if [ $# -gt 0 ]; then
+     if [ ${__FLAGS_GETOPT_VERS} -ne ${__FLAGS_GETOPT_VERS_ENH} ]; then
+       _flags_getoptStandard "$@"
+@@ -818,7 +554,6 @@ FLAGS()
+     fi
+     flags_return=$?
+   else
+-    # nothing passed; won't bother running getopt
+     __flags_opts='--'
+     flags_return=${FLAGS_TRUE}
+   fi
+@@ -832,23 +567,11 @@ FLAGS()
+   return ${flags_return}
+ }
+ 
+-# This is a helper function for determining the `getopt` version for platforms
+-# where the detection isn't working. It simply outputs debug information that
+-# can be included in a bug report.
+-#
+-# Args:
+-#   none
+-# Output:
+-#   debug info that can be included in a bug report
+-# Returns:
+-#   nothing
+ flags_getoptInfo()
+ {
+-  # platform info
+   _flags_debug "uname -a: `uname -a`"
+   _flags_debug "PATH: ${PATH}"
+ 
+-  # shell info
+   if [ -n "${BASH_VERSION:-}" ]; then
+     _flags_debug 'shell: bash'
+     _flags_debug "BASH_VERSION: ${BASH_VERSION}"
+@@ -857,7 +580,6 @@ flags_getoptInfo()
+     _flags_debug "ZSH_VERSION: ${ZSH_VERSION}"
+   fi
+ 
+-  # getopt info
+   getopt >/dev/null
+   _flags_getoptReturn=$?
+   _flags_debug "getopt return: ${_flags_getoptReturn}"
+@@ -866,39 +588,16 @@ flags_getoptInfo()
+   unset _flags_getoptReturn
+ }
+ 
+-# Returns whether the detected getopt version is the enhanced version.
+-#
+-# Args:
+-#   none
+-# Output:
+-#   none
+-# Returns:
+-#   bool: true if getopt is the enhanced version
+ flags_getoptIsEnh()
+ {
+   test ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_ENH}
+ }
+ 
+-# Returns whether the detected getopt version is the standard version.
+-#
+-# Args:
+-#   none
+-# Returns:
+-#   bool: true if getopt is the standard version
+ flags_getoptIsStd()
+ {
+   test ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_STD}
+ }
+ 
+-# This is effectively a 'usage()' function. It prints usage information and
+-# exits the program with ${FLAGS_FALSE} if it is ever found in the command line
+-# arguments. Note this function can be overridden so other apps can define
+-# their own --help flag, replacing this one, if they want.
+-#
+-# Args:
+-#   none
+-# Returns:
+-#   integer: success of operation (always returns true)
+ flags_help()
+ {
+   if [ -n "${FLAGS_HELP:-}" ]; then
+@@ -953,19 +652,14 @@ flags_help()
+         echo "${flags_helpStr_}" >&2
+       else
+         echo "  ${flags_flagStr_}  ${flags_help_}" >&2
+-        # note: the silliness with the x's is purely for ksh93 on Ubuntu 6.06
+-        # because it doesn't like empty strings when used in this manner.
+         flags_emptyStr_="`echo \"x${flags_flagStr_}x\" \
+             |awk '{printf "%"length($0)-2"s", ""}'`"
+         flags_helpStr_="  ${flags_emptyStr_}  ${flags_defaultStr_}"
+         flags_helpStrLen_=`expr "${flags_helpStr_}" : '.*'`
+         if [ ${__FLAGS_GETOPT_VERS} -eq ${__FLAGS_GETOPT_VERS_STD} \
+             -o ${flags_helpStrLen_} -lt ${flags_columns_} ]; then
+-          # indented to match help string
+           echo "${flags_helpStr_}" >&2
+         else
+-          # indented four from left to allow for longer defaults as long flag
+-          # names might be used too, making things too long
+           echo "    ${flags_defaultStr_}" >&2
+         fi
+       fi
+@@ -978,12 +672,6 @@ flags_help()
+   return ${FLAGS_TRUE}
+ }
+ 
+-# Reset shflags back to an uninitialized state.
+-#
+-# Args:
+-#   none
+-# Returns:
+-#   nothing
+ flags_reset()
+ {
+   for flags_name_ in ${__flags_longNames}; do
+@@ -1000,7 +688,6 @@ flags_reset()
+     eval ${flags_strToEval_}
+   done
+ 
+-  # reset internal variables
+   __flags_boolNames=' '
+   __flags_longNames=' '
+   __flags_shortNames=' '

skopeo/Makefile

@@ -1,77 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=skopeo
-PKG_VERSION:=1.9.2
-PKG_RELEASE:=$(AUTORELEASE)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/containers/skopeo/archive/v$(PKG_VERSION)
-PKG_HASH:=9a321ba75f213e5c46cba7f92073c2437137a56d3140c9ab6e723fb92890f9d0
-
-PKG_LICENSE:=Apache-2.0
-PKG_LICENSE_FILES:=LICENSE
-
-HOST_BUILD_DEPENDS:=golang/host
-HOST_BUILD_PARALLEL:=1
-
-PKG_BUILD_DEPENDS:=golang/host
-PKG_BUILD_PARALLEL:=1
-PKG_USE_MIPS16:=0
-
-GO_PKG:=github.com/containers/skopeo
-GO_PKG_BUILD_PKG:=github.com/containers/skopeo/cmd/skopeo
-
-include $(INCLUDE_DIR)/host-build.mk
-include $(INCLUDE_DIR)/package.mk
-
-GOLANG_PACKAGE_MK:=$(wildcard $(TOPDIR)/feeds/*/lang/golang/golang-package.mk)
-GOLANG_HOST_PACKAGE_MK:=$(wildcard $(TOPDIR)/feeds/*/lang/golang/golang-host-build.mk)
-
-# verify that there is only one single file returned
-ifneq (1,$(words $(GOLANG_PACKAGE_MK)))
-ifeq (0,$(words $(GOLANG_PACKAGE_MK)))
-$(error did not find golang-package.mk in any feed)
-else
-$(error found multiple golang-package.mk files in the feeds)
-endif
-else
-$(info found golang-package.mk at $(GOLANG_PACKAGE_MK))
-endif
-
-include $(GOLANG_PACKAGE_MK)
-include $(GOLANG_HOST_PACKAGE_MK)
-
-define Package/skopeo
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Command line utility for container image management
-  URL:=https://github.com/containers/skopeo
-  DEPENDS:=$(GO_ARCH_DEPENDS)
-endef
-
-define Package/skopeo/description
-  skopeo is a command line utility that performs various operations on container images and image repositories.
-endef
-
-define Package/skopeo/conffiles
-/etc/containers/policy.json
-endef
-
-GO_PKG_TAGS=exclude_graphdriver_devicemapper,exclude_graphdriver_btrfs,containers_image_openpgp
-GO_PKG_BUILD_VARS += GO111MODULE=auto
-
-define Build/Compile
-	$(call GoPackage/Build/Compile)
-	$(call GoPackage/Package/Install/Bin,$(PKG_INSTALL_DIR))
-endef
-
-define Package/skopeo/install
-	$(call GoPackage/Package/Install/Bin,$(1))
-	$(INSTALL_DIR) $(1)/etc/containers
-	$(INSTALL_DATA) ./files/etc/containers/policy.json $(1)/etc/containers/policy.json
-endef
-
-$(eval $(call GoBinHostBuild))
-$(eval $(call HostBuild))
-$(eval $(call GoBinPackage,skopeo))
-$(eval $(call BuildPackage,skopeo))

skopeo/files/etc/containers/policy.json

@@ -1,15 +0,0 @@
-{
-    "default": [
-        {
-            "type": "insecureAcceptAnything"
-        }
-    ],
-    "transports":
-        {
-            "docker-daemon":
-                {
-                    "": [{"type":"insecureAcceptAnything"}]
-                }
-        }
-}
-

stunc/Makefile

@@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=stunc
 PKG_RELEASE:=1
-PKG_VERSION:=1.1.13
+PKG_VERSION:=1.1.8
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/stunc.git
-PKG_SOURCE_VERSION:=5b65364709a921db0956bf74a4f126217cfb1775
+PKG_SOURCE_VERSION:=2628f2c9e0b99064a703a1ad069f0f298bc36076
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -23,6 +23,8 @@ endif
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/stunc/default
@@ -30,7 +32,7 @@ define Package/stunc/default
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF STUN Client
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libblobmsg-json +libbbf_api
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libblobmsg-json
 endef
 
 define Package/stunc-mbedtls
@@ -62,16 +64,19 @@ TARGET_CFLAGS += \
 	-Wall -Werror
 
 ifeq ($(BUILD_VARIANT),wolfssl)
+  TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
   MAKE_FLAGS += \
 	USE_WOLFSSL="yes"
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
+  TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/mbedtls
   MAKE_FLAGS += \
 	USE_MBEDTLS="yes"
 endif
 
 ifeq ($(BUILD_VARIANT),openssl)
+  TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
   MAKE_FLAGS += \
 	USE_OPENSSL="yes"
 endif

stunc/files/etc/config/stunc

@@ -8,5 +8,5 @@ config stunc 'stunc'
 	option min_keepalive '30'
 	option max_keepalive '3600'
 #	option client_port 7547
-	option log_level '1'
+	option log_level '0'
 

sulu-builder/Config.in

@@ -1,126 +0,0 @@
-menu "Configuration"
-	depends on PACKAGE_sulu-builder
-
-menu "SULU_CORE"
-	depends on PACKAGE_sulu-builder
-	config SULU_CORE_ENABLE
-	bool "Enable this plugin"
-	default y
-
-	config SULU_CORE_URL
-		string "SULU url"
-		default "https://dev.iopsys.eu/websdk/sulu.git"
-
-	config SULU_CORE_VERSION
-		string "SULU repo version"
-		default "09f38d92c0690f4d101d7914948226299fafe066"
-endmenu
-
-menu "SULU_PLUGIN_LCM"
-	depends on PACKAGE_sulu-builder
-	config SULU_PLUGIN_LCM_ENABLE
-	bool "Enable this plugin"
-	default y
-
-	config SULU_PLUGIN_LCM_NAME
-		depends on SULU_PLUGIN_LCM_ENABLE
-		string "Plugin_name"
-		default "sulu-lcm"
-
-	config SULU_PLUGIN_LCM_URL
-		depends on SULU_PLUGIN_LCM_ENABLE
-		string "URL"
-		default "https://dev.iopsys.eu/websdk/sulu-lcm.git"
-
-	config SULU_PLUGIN_LCM_VERSION
-		depends on SULU_PLUGIN_LCM_ENABLE
-		string "Version"
-		default "40da874871120e4a042ec5ac814e3c96e22d8c24"
-endmenu
-
-menu "SULU_PLUGIN_MULTIAP"
-	depends on PACKAGE_sulu-builder
-	config SULU_PLUGIN_MULTIAP_ENABLE
-	bool "Enable this plugin"
-	default y
-
-	config SULU_PLUGIN_MULTIAP_NAME
-		depends on SULU_PLUGIN_MULTIAP_ENABLE
-		string "Plugin_name"
-		default "sulu-multi-ap"
-
-	config SULU_PLUGIN_MULTIAP_URL
-		depends on SULU_PLUGIN_MULTIAP_ENABLE
-		string "URL"
-		default "https://dev.iopsys.eu/websdk/sulu-multi-ap.git"
-
-	config SULU_PLUGIN_MULTIAP_VERSION
-		depends on SULU_PLUGIN_MULTIAP_ENABLE
-		string "Version"
-		default "68d4919a7a40b3029ab56b47fc97bfa28619639b"
-endmenu
-
-menu "SULU_THEME_IOPSYS"
-	depends on PACKAGE_sulu-builder
-	config SULU_THEME_IOPSYS_ENABLE
-	bool "Enable this plugin"
-	default y
-
-	config SULU_THEME_IOPSYS_NAME
-		depends on SULU_THEME_IOPSYS_ENABLE
-		string "Plugin_name"
-		default "sulu-theme-iopsys"
-
-	config SULU_THEME_IOPSYS_URL
-		depends on SULU_THEME_IOPSYS_ENABLE
-		string "URL"
-		default "https://dev.iopsys.eu/websdk/sulu-theme-iopsys.git"
-
-	config SULU_THEME_IOPSYS_VERSION
-		depends on SULU_THEME_IOPSYS_ENABLE
-		string "Version"
-		default "e80fea80cdf8d49db0ae70b5c26a5dab49b8a20d"
-endmenu
-
-menu "SULU_PLUGIN_CUSTOM"
-	depends on PACKAGE_sulu-builder
-	config SULU_PLUGIN_CUSTOM_ENABLE
-	bool "Enable this plugin"
-	default n
-
-	config SULU_PLUGIN_CUSTOM_NAME
-		depends on SULU_PLUGIN_CUSTOM_ENABLE
-		string "Plugin_name"
-		default "custom_app"
-
-	config SULU_PLUGIN_CUSTOM_URL
-		depends on SULU_PLUGIN_CUSTOM_ENABLE
-		string "URL"
-		default ""
-
-	config SULU_PLUGIN_CUSTOM_VERSION
-		depends on SULU_PLUGIN_CUSTOM_ENABLE
-		string "Version"
-endmenu
-
-menu "SULU_THEME_CUSTOM"
-	depends on PACKAGE_sulu-builder
-	config SULU_THEME_CUSTOM_ENABLE
-	bool "Enable this plugin"
-	default n
-
-	config SULU_THEME_CUSTOM_NAME
-		depends on SULU_THEME_CUSTOM_ENABLE
-		string "Plugin_name"
-		default "plugin_theme_custom"
-
-	config SULU_THEME_CUSTOM_URL
-		depends on SULU_THEME_CUSTOM_ENABLE
-		string "URL"
-		default ""
-
-	config SULU_THEME_CUSTOM_VERSION
-		depends on SULU_THEME_CUSTOM_ENABLE
-		string "Version"
-endmenu
-endmenu

sulu-builder/Makefile

@@ -1,158 +0,0 @@
-#
-# Copyright (C) 2021-2022 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=sulu-builder
-PKG_VERSION:=1.2.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/websdk/sulu-builder.git
-PKG_SOURCE_VERSION:=16bbf7e5a28a79c47a63bf454fc2f525d667c73d
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/${PKG_NAME}
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=Build sulu from source
-	DEPENDS:=+nginx +mosquitto-auth-shadow
-	CONFLICTS:=sulu
-endef
-
-define Package/${PKG_NAME}/description
-	SULU-CE ReactJS based Web UI builder.
-endef
-
-define Package/${PKG_NAME}/config
-	source "$(SOURCE)/Config.in"
-endef
-
-# Sulu core and other dependent needs to be updated in Config.in
-SULU_DL_FILE:=sulu_core-${CONFIG_SULU_CORE_VERSION}.tar.gz
-define Download/sulu_core
-  FILE:=$(SULU_DL_FILE)
-  URL:=$(CONFIG_SULU_CORE_URL)
-  PROTO:=git
-  SUBDIR:=core
-  VERSION:=${CONFIG_SULU_CORE_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_CORE_ENABLE),y)
-$(eval $(call Download,sulu_core))
-endif
-
-SULU_PLUGIN_LCM_DL:=${CONFIG_SULU_PLUGIN_LCM_NAME}_plugin-${CONFIG_SULU_PLUGIN_LCM_VERSION}.tar.gz
-define Download/sulu_plugin_lcm
-  FILE:=${SULU_PLUGIN_LCM_DL}
-  URL:=${CONFIG_SULU_PLUGIN_LCM_URL}
-  PROTO:=git
-  SUBDIR:=plugins/${CONFIG_SULU_PLUGIN_LCM_NAME}
-  VERSION:=${CONFIG_SULU_PLUGIN_LCM_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_PLUGIN_LCM_ENABLE),y)
-$(eval $(call Download,sulu_plugin_lcm))
-endif
-
-SULU_PLUGIN_MULTIAP_DL:=${CONFIG_SULU_PLUGIN_MULTIAP_NAME}_plugin-${CONFIG_SULU_PLUGIN_MULTIAP_VERSION}.tar.gz
-define Download/sulu_plugin_multiap
-  FILE:=${SULU_PLUGIN_MULTIAP_DL}
-  URL:=${CONFIG_SULU_PLUGIN_MULTIAP_URL}
-  PROTO:=git
-  SUBDIR:=plugins/${CONFIG_SULU_PLUGIN_MULTIAP_NAME}
-  VERSION:=${CONFIG_SULU_PLUGIN_MULTIAP_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_PLUGIN_MULTIAP_ENABLE),y)
-$(eval $(call Download,sulu_plugin_multiap))
-endif
-
-SULU_THEME_IOPSYS_DL:=${CONFIG_SULU_THEME_IOPSYS_NAME}_plugin-${CONFIG_SULU_THEME_IOPSYS_VERSION}.tar.gz
-define Download/sulu_theme_iopsys
-  FILE:=${SULU_THEME_IOPSYS_DL}
-  URL:=${CONFIG_SULU_THEME_IOPSYS_URL}
-  PROTO:=git
-  SUBDIR:=plugins/${CONFIG_SULU_THEME_IOPSYS_NAME}
-  VERSION:=${CONFIG_SULU_THEME_IOPSYS_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_THEME_IOPSYS_ENABLE),y)
-$(eval $(call Download,sulu_theme_iopsys))
-endif
-
-SULU_PLUGIN_CUSTOM_DL:=${CONFIG_SULU_PLUGIN_CUSTOM_NAME}_plugin-${CONFIG_SULU_PLUGIN_CUSTOM_VERSION}.tar.gz
-define Download/sulu_plugin_custom
-  FILE:=${SULU_PLUGIN_CUSTOM_DL}
-  URL:=${CONFIG_SULU_PLUGIN_CUSTOM_URL}
-  PROTO:=git
-  SUBDIR:=plugins/${CONFIG_SULU_PLUGIN_CUSTOM_NAME}
-  VERSION:=${CONFIG_SULU_PLUGIN_CUSTOM_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_PLUGIN_CUSTOM_ENABLE),y)
-$(eval $(call Download,sulu_plugin_custom))
-endif
-
-SULU_THEME_CUSTOM_DL:=${CONFIG_SULU_THEME_CUSTOM_NAME}_plugin-${CONFIG_SULU_THEME_CUSTOM_VERSION}.tar.gz
-define Download/sulu_theme_custom
-  FILE:=${SULU_THEME_CUSTOM_DL}
-  URL:=${CONFIG_SULU_THEME_CUSTOM_URL}
-  PROTO:=git
-  SUBDIR:=plugins/${CONFIG_SULU_THEME_CUSTOM_NAME}
-  VERSION:=${CONFIG_SULU_THEME_CUSTOM_VERSION}
-  HASH:=skip
-endef
-
-ifeq ($(CONFIG_SULU_THEME_CUSTOM_ENABLE),y)
-$(eval $(call Download,sulu_theme_custom))
-endif
-
-define Build/Prepare
-	$(Build/Prepare/Default)
-	tar xzf $(DL_DIR)/${SULU_DL_FILE} -C $(PKG_BUILD_DIR)
-ifeq ($(CONFIG_SULU_PLUGIN_LCM_ENABLE),y)
-	tar xzf $(DL_DIR)/${SULU_PLUGIN_LCM_DL} -C $(PKG_BUILD_DIR)
-endif
-ifeq ($(CONFIG_SULU_PLUGIN_MULTIAP_ENABLE),y)
-	tar xzf $(DL_DIR)/${SULU_PLUGIN_MULTIAP_DL} -C $(PKG_BUILD_DIR)
-endif
-ifeq ($(CONFIG_SULU_THEME_IOPSYS_ENABLE),y)
-	tar xzf $(DL_DIR)/${SULU_THEME_IOPSYS_DL} -C $(PKG_BUILD_DIR)
-endif
-ifeq ($(CONFIG_SULU_PLUGIN_CUSTOM_ENABLE),y)
-	tar xzf $(DL_DIR)/${SULU_PLUGIN_CUSTOM_DL} -C $(PKG_BUILD_DIR)
-endif
-ifeq ($(CONFIG_SULU_THEME_CUSTOM_ENABLE),y)
-	tar xzf $(DL_DIR)/${SULU_THEME_CUSTOM_DL} -C $(PKG_BUILD_DIR)
-endif
-endef
-
-define Package/${PKG_NAME}/install
-	$(INSTALL_DIR) $(1)/sulu
-	$(INSTALL_DIR) $(1)/sulu/config
-	$(INSTALL_DIR) $(1)/sulu/config/widgets
-	$(INSTALL_DIR) $(1)/etc/nginx/
-	$(INSTALL_DIR) $(1)/etc/mosquitto/conf.d/
-	$(CP) $(PKG_BUILD_DIR)/build/dist/* $(1)/sulu
-	$(CP) $(PKG_BUILD_DIR)/build/src/config/*.json $(1)/sulu/config/
-	$(CP) $(PKG_BUILD_DIR)/build/src/config/widgets/diagnostics.json $(1)/sulu/config/widgets/
-ifeq ($(CONFIG_PACKAGE_skopeo)$(CONFIG_PACKAGE_umoci),yy)
-	$(CP) $(PKG_BUILD_DIR)/build/src/config/widgets/lcm-store.json $(1)/sulu/config/widgets/
-endif
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,${PKG_NAME}))
-

sulu-builder/files/etc/init.d/sulu

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t sulu.init -p debug
-}
-
-start_service() {
-	procd_open_instance sulu
-	# append sulu connection injection
-	procd_close_instance
-
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers()
-{
-	procd_add_config_trigger "config.change" "obuspa" /etc/init.d/sulu reload
-}

sulu-builder/files/etc/mosquitto/conf.d/obuspa.conf

@@ -1,3 +0,0 @@
-listener 1883 127.0.0.1
-allow_anonymous true
-

sulu-builder/files/etc/mosquitto/conf.d/sulu.conf

@@ -1,5 +0,0 @@
-listener 9001
-protocol websockets
-plugin /usr/lib/mosquitto_auth_shadow.so
-require_certificate false
-allow_anonymous false

sulu-builder/files/etc/nginx/conf.d/sulu.locations

@@ -1,18 +0,0 @@
-location /config/ {
-	autoindex on;
-	if ($request_method = 'OPTIONS') {
-		add_header 'Access-Control-Allow-Origin' '*';
-		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS';
-		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type,Range';
-		add_header 'Access-Control-Max-Age' 1728000;
-		add_header 'Content-Type' 'text/plain; charset=utf-8';
-		add_header 'Content-Length' 0;
-		return 204;
-	}
-	if ($request_method = 'GET') {
-		add_header 'Access-Control-Allow-Origin' '*' always;
-		add_header 'Access-Control-Allow-Methods' 'GET, POST, OPTIONS' always;
-		add_header 'Access-Control-Allow-Headers' 'DNT,User-Agent,X-Requested-With,If-Modified-Since,Cache-Control,Content-Type,Range' always;
-		add_header 'Access-Control-Expose-Headers' 'Content-Length,Content-Range' always;
-	}
-}

sulu-builder/files/etc/uci-defaults/90-sulu-set-nginx-conf

@@ -1,10 +0,0 @@
-mkdir -p /tmp/sulu
-
-uci -q get nginx._sulu && exit 0
-
-uci -q set nginx._sulu=server
-uci -q add_list nginx._sulu.listen='8080'
-uci -q add_list nginx._sulu.listen='[::]:8080'
-uci -q set nginx._sulu.root='/sulu'
-uci -q set nginx._sulu.server_name='_sulu'
-uci -q add_list nginx._sulu.include='conf.d/sulu.locations'