map-topology: add ieee1905 dependency

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@iopsys.eu>

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -25,7 +25,3 @@ config BBFDM_ENABLE_JSON_PLUGIN
 config BBFDM_ENABLE_DOTSO_PLUGIN
 	bool "Enable shared library plugin to extend datamodel"
 	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbf/Makefile

@@ -5,11 +5,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.9
+PKG_VERSION:=6.6.35
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=4ad900a9bb6b4a0dd38edc1d14e1b6cbfeaa8e9b
+PKG_SOURCE_VERSION:=0159ecf5d84805d76dff8cb80831334e200989c7
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
@@ -18,15 +18,14 @@ PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  ABI_VERSION:=1.0
+  TITLE:=Library for libbbfdm API
 endef
 
 define Package/libbbfdm/default
@@ -34,7 +33,7 @@ define Package/libbbfdm/default
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libcurl
 endef
 
 define Package/libbbfdm
@@ -67,17 +66,6 @@ define Package/libbbfdm-wolfssl
   VARIANT:=wolfssl
 endef
 
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
-endef
-
 define Package/libbbfdm/config
 	source "$(SOURCE)/Config_bbfdm.in"
 endef
@@ -97,50 +85,56 @@ define Build/Prepare
 endef
 endif
 
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+CONFIGURE_ARGS += \
+	--enable-tr181
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
+CONFIGURE_ARGS += \
+	--enable-tr104
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
+CONFIGURE_ARGS += \
+	--enable-tr143
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
 
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
 ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
+CONFIGURE_ARGS += \
+	--enable-json-plugin
 endif
 
 ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
+CONFIGURE_ARGS += \
+	--enable-shared-library
 endif
 
 ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+CONFIGURE_ARGS += --enable-libopenssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
 endif
 
 ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+CONFIGURE_ARGS += --enable-libwolfssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += --enable-libmbedtls
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
 endif
 
 define Package/libbbf_api/install
@@ -149,15 +143,13 @@ endef
 
 define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
 endef
 
 define Package/libbbfdm/default/prerm
@@ -166,18 +158,6 @@ define Package/libbbfdm/default/prerm
 	exit 0
 endef
 
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
 Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
 Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
 Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
@@ -194,10 +174,10 @@ define Build/InstallDev
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	touch $(1)/usr/lib/libbbf_api.so
 endef
 
-$(eval $(call BuildPackage,userinterface))
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
 $(eval $(call BuildPackage,libbbfdm-openssl))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -1,112 +0,0 @@
-{
-	"Device.UserInterface.": {
-		"type": "object",
-		"version": "2.0",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Device.UserInterface.RemoteAccess.": {
-			"type": "object",
-			"version": "2.0",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": false,
-			"array": false,
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "enable"
-							}
-						}
-					}
-				]
-			},
-			"Port": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "port"
-							}
-						}
-					}
-				]
-			},
-			"SupportedProtocols": {
-				"type": "string",
-				"read": true,
-				"write": false,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"list": {
-					"datatype": "string",
-					"enumerations": [
-						"HTTP",
-						"HTTPS"
-					]
-				},
-				"default": "HTTP"
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "protocol"
-							}
-						}
-					}
-				]
-			}
-		}
-	}
-}

bbf/files/etc/config/userinterface

@@ -1,6 +0,0 @@
-config userinterface 'remote_access'
-	option enable '0'
-	option interface 'wan'
-	option port '80'
-	option protocol 'HTTP'
-

bbf/files/etc/firewall.userinterface

@@ -1,88 +0,0 @@
-#!/bin/sh
-
-
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ]; then
-	exit 0;
-fi
-
-function exec_cmd()
-{
-	if ! $@; then
-		log "Failed to run [$@]"
-	fi
-}
-
-function configure_firewall_rule()
-{
-	local enable port protocol gui_port
-	local zone interface
-
-	config_load userinterface
-	config_get_bool enable remote_access enable 1
-	config_get port remote_access port
-	config_get interface remote_access interface
-
-	if [ "${enable}" -eq "0" -o -z "${port}" -o -z "${interface}" ]; then
-		return 0;
-	fi
-
-	zone="zone_${interface}_input"
-	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-
-	zone="zone_${interface}_output"
-	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-}
-
-function delete_firewall_rule()
-{
-	local zone interface
-	local CMD
-
-	config_load userinterface
-	config_get interface remote_access interface
-
-	# Clean remote interface rules
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	zone="zone_${interface}_input"
-	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
-		fi
-	done
-
-	zone="zone_${interface}_output"
-	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
-		fi
-	done
-}
-
-# Delete existing remote access rules
-delete_firewall_rule
-
-# Configure the User Interface rule
-configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	procd_open_instance usp
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	# Inject firewall rules
-	if [ "${enable}" -eq "1" ]; then
-		/etc/firewall.userinterface
-	fi
-
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface"
-}

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bulkdata/Makefile

@@ -8,13 +8,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.9
+PKG_VERSION:=2.0.3
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
+PKG_SOURCE_VERSION:=85d7486a21a9eb0e0f345b587b3ac506edcb72fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -25,6 +25,8 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_BUILD_DEPENDS:=bbf
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -32,7 +34,7 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json
 endef
 
 TARGET_CFLAGS += \
@@ -48,8 +50,8 @@ endif
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/init.d/bulkdatad

@@ -7,19 +7,22 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable
+	local enable=$(uci -q get bulkdata.bulkdata.enable)
 
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	procd_open_instance bulkdata
-	[ "$enable" -eq "1" ] && {
-		procd_set_param command "$PROG"
-		procd_set_param respawn "3" "7" "0"
+	[ "$enable" != "1" ] && {
+		return 0
 	}
+
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn "3" "7" "0"
 	procd_close_instance
 }
 
+boot() {
+	start
+}
+
 reload_service() {
 	stop
 	start 

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.5
+PKG_VERSION:=3.5.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=cf4e91ffe0a1d83140fef5b41d16e581e5341cec
+PKG_SOURCE_VERSION:=8c94908eb230dc453dd2f5575be6c06b086b2e7d
 PKG_MIRROR_HASH:=skip
 endif
 

dectmngr/files/etc/init.d/dectmngr

@@ -11,8 +11,6 @@ PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
 	pidof $NAME && killall -q $NAME
@@ -32,7 +30,7 @@ start_service() {
 
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
@@ -73,7 +71,7 @@ start_service() {
 stop_service() {
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
@@ -88,10 +86,8 @@ service_triggers()
 }
 
 boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH

dslmngr/Makefile

@@ -26,7 +26,7 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
 else
   $(info Unexpected CONFIG_TARGET)

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@TARGET_iopsys_brcm63xx_arm
 endef
 
 define Package/easy-qos/description

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.8.0
+PKG_VERSION:=6.4.44
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=ddc7b272bec5e3b5c2a216a1f86cd5589a1a4a19
+PKG_SOURCE_VERSION:=e4f811b7cd2836cdcce5ea0f97f515a317da5bc3
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -36,38 +36,28 @@ define Package/easy-soc-libs
   MENU:=1
 endef
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
-export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
@@ -97,7 +87,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_airoha:ecnt_api
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
 endef
 
 define Package/libethernet/config

easy-soc-libs/wifi.mk

@@ -2,7 +2,7 @@
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_brcmbca:bcmkernel
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
 endef
 
 define Package/libwifi/config

endptmngr/Makefile

@@ -13,7 +13,7 @@ LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=dc12712af8c4088f7873502ca845e51c68a1ada9
+PKG_SOURCE_VERSION:=2390a3503990e04e33e8e448ad9dccc00f206908
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
@@ -30,7 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BRCM_SDK_VER_504021
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk

evoice/Makefile

@@ -5,22 +5,21 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
+PKG_VERSION:=0.2.1
 
 LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
+PKG_SOURCE_VERSION:=f2477946f9e142d01820b38e32ce98a781e0310e
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
+
 # All config variable that are passed to the make invocation, directly or
 # indirectly. This ensures that the package is rebuilt on config-changes.
 #PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
@@ -32,10 +31,7 @@ define Package/$(PKG_NAME)
 	SUBMENU:=Telephony
 	TITLE:=Ensemble Voice
 	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +TARGET_iopsys_brcm63xx_arm:bcmkernel +TARGET_iopsys_econet:kmod-voip_driver
 endef
 
 define Package/$(PKG_NAME)/description
@@ -44,60 +40,33 @@ endef
 
 ifeq ($(LOCAL_DEV),1)
 # If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+# LOCAL_DEV and change the path below to your own git repository.
 define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+	rsync -av /swdev/bide/evoice_clean/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
+	export IDIR = $(STAGING_DIR)/usr/include
+	export BDIR = bcm963xx/userspace/private/apps/voice
+	export _XFLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc -I$(IDIR)/bcm963xx/xchg/bos/publicInc -I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_econet),y)
 	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
 endif
 
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
 export TARGET_PLATFORM
 
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
 
 define Build/Compile
 	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=SVrgBcmFxs LIF=cerder DBG=dbg
+	+$(MAKE) -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix TRG=libvoiceservice LIF=cerder DBG=dbg
 endef
 
 define Package/evoice/install
 	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/

evoice/files/etc/config/voice

@@ -22,7 +22,6 @@ config SIPClient 'Client2'
 config SIPNetwork 'Network1'
 	option Enable '1'
 	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
 	option ProxyServerPort '5060'
 	option ProxyServerTransport 'UDP'
 	option RegistrarServer 'sip-proxy.iopsys.eu'
@@ -34,45 +33,57 @@ config SIPNetwork 'Network1'
 	option TimerRegistrationFailed '120'
 	option TimerT1 '500'
 	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
 	list CodecList '1CodecProfile1'
 	list CodecList '1CodecProfile2'
 	list CodecList '1CodecProfile3'
 	list CodecList '1CodecProfile5'
 	list CodecList '1CodecProfile4'
 
+config Capabilities 'Capabilities'
+	option FacilityActions 'CW_ACTIVE,CFU_ACTIVE'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+
+config CapabilitiesCodec 'Codec5'
+	option Codec 'G.729'
+
 config CodecProfile '1CodecProfile1'
 	option Enable '1'
-	option Codec 'G.711ALaw'
+	option Codec 'Codec1'
 	option PacketizationPeriod '20'
 	option SilenceSupression '1'
 
 config CodecProfile '1CodecProfile2'
 	option Enable '1'
-	option Codec 'G.711MuLaw'
+	option Codec 'Codec2'
 	option PacketizationPeriod '20'
 	option SilenceSupression '1'
 
 config CodecProfile '1CodecProfile3'
 	option Enable '1'
-	option Codec 'G.726'
+	option Codec 'Codec3'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
 config CodecProfile '1CodecProfile4'
 	option Enable '1'
-	option Codec 'G.722'
+	option Codec 'Codec4'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
 config CodecProfile '1CodecProfile5'
 	option Enable '1'
-	option Codec 'G.729'
+	option Codec 'Codec5'
 	option PacketizationPeriod '20'
 	option SilenceSupression '0'
 
@@ -138,7 +149,7 @@ config IncomingMap 'IncomingMap2'
 	option Line 'Line2'
 
 config IncomingMap 'IncomingMap3'
-	option Enable '0'
+	option Enable '1'
 	option Extension 'Extension2'
 	option Line 'Line1'
 
@@ -211,15 +222,15 @@ config NumberingPlan 'NumberingPlan2'
 	option InterDigitTimerStd '2000'
 	option InterDigitTimerOpen '2000'
 	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
+	list PrefixList '3PrefixInfo1'
+	list PrefixList '3PrefixInfo2'
+	list PrefixList '3PrefixInfo3'
+	list PrefixList '3PrefixInfo4'
+	list PrefixList '3PrefixInfo5'
+	list PrefixList '3PrefixInfo6'
+	list PrefixList '3PrefixInfo7'
+	list PrefixList '3PrefixInfo8'
+	list PrefixList '3PrefixInfo9'
 
 config NumberingPlan 'NumberingPlan3'
 	option MinimumNumberOfDigits '5'
@@ -227,9 +238,9 @@ config NumberingPlan 'NumberingPlan3'
 	option InterDigitTimerStd '2000'
 	option InterDigitTimerOpen '2000'
 	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
+	list PrefixList '4PrefixInfo1'
 
-config PrefixInfo '2PrefixInfo1'
+config PrefixInfo '3PrefixInfo1'
 	option Enable '1'
 	option PrefixRange '*43#'
 	option PrefixMinNumberOfDigits '4'
@@ -239,7 +250,7 @@ config PrefixInfo '2PrefixInfo1'
 	option FacilityAction 'CW_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo2'
+config PrefixInfo '3PrefixInfo2'
 	option Enable '1'
 	option PrefixRange '#43#'
 	option PrefixMinNumberOfDigits '4'
@@ -249,7 +260,7 @@ config PrefixInfo '2PrefixInfo2'
 	option FacilityAction 'CW_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo3'
+config PrefixInfo '3PrefixInfo3'
 	option Enable '1'
 	option PrefixRange '*21*(X+)#'
 	option PrefixMinNumberOfDigits '9'
@@ -259,7 +270,7 @@ config PrefixInfo '2PrefixInfo3'
 	option FacilityAction 'CFU_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo4'
+config PrefixInfo '3PrefixInfo4'
 	option Enable '1'
 	option PrefixRange '#21#'
 	option PrefixMinNumberOfDigits '4'
@@ -269,7 +280,7 @@ config PrefixInfo '2PrefixInfo4'
 	option FacilityAction 'CFU_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo5'
+config PrefixInfo '3PrefixInfo5'
 	option Enable '1'
 	option PrefixRange '*67*(X+)#'
 	option PrefixMinNumberOfDigits '9'
@@ -279,7 +290,7 @@ config PrefixInfo '2PrefixInfo5'
 	option FacilityAction 'CFB_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo6'
+config PrefixInfo '3PrefixInfo6'
 	option Enable '1'
 	option PrefixRange '#67#'
 	option PrefixMinNumberOfDigits '4'
@@ -289,7 +300,7 @@ config PrefixInfo '2PrefixInfo6'
 	option FacilityAction 'CFB_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo7'
+config PrefixInfo '3PrefixInfo7'
 	option Enable '1'
 	option PrefixRange '*61*(X+(*X+)?)#'
 	option PrefixMinNumberOfDigits '15'
@@ -299,7 +310,7 @@ config PrefixInfo '2PrefixInfo7'
 	option FacilityAction 'CFNR_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo8'
+config PrefixInfo '3PrefixInfo8'
 	option Enable '1'
 	option PrefixRange '#61#'
 	option PrefixMinNumberOfDigits '4'
@@ -309,7 +320,7 @@ config PrefixInfo '2PrefixInfo8'
 	option FacilityAction 'CFNR_DEACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '2PrefixInfo9'
+config PrefixInfo '3PrefixInfo9'
 	option Enable '1'
 	option PrefixRange '*31*'
 	option PrefixMinNumberOfDigits '4'
@@ -319,7 +330,7 @@ config PrefixInfo '2PrefixInfo9'
 	option FacilityAction 'CA_ACTIVATE'
 	option FacilityActionArgument ' '
 
-config PrefixInfo '3PrefixInfo1'
+config PrefixInfo '4PrefixInfo1'
 	option Enable '1'
 	option PrefixRange '110|112'
 	option PrefixMinNumberOfDigits '7'

evoice/files/etc/evoice/voicecap

@@ -0,0 +1,38 @@
+# Capabilties are platform dependent. Keep these separated from customer configuration
+ 
+config capabilities_prm 'limits'
+	option MaxCallLogCount '100'
+
+config capabilities_prm 'features'
+	option QIModelsSupported 'G.107'
+
+config CapabilitiesCodec 'Codec1'
+	option Codec 'G.711ALaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec2'
+	option Codec 'G.711MuLaw'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '1'
+
+config CapabilitiesCodec 'Codec3'
+	option Codec 'G.726'
+	option BitRate '32000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.722'
+	option BitRate '64000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	
+config CapabilitiesCodec 'Codec4'
+	option Codec 'G.729'
+	option BitRate '8000'
+	option PacketizationPeriod '20,30'
+	option SilenceSupression '0'
+	

evoice/files/etc/evoice/voicedm

@@ -3,7 +3,6 @@ config account 'map_board'
    option HW_Has_Voice 'hw.board.hasVoice'
    option HW_Has_DECT 'hw.board.hasDect'
    option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
    option ProductID 'device.deviceinfo.ModelName'
    option I3_VERSION 'device.deviceinfo.SoftwareVersion'
    option SerialNumber 'device.deviceinfo.SerialNumber'
@@ -48,23 +47,16 @@ config account 'map_account'
 # Network stuff associated with an account.
 # All parameters in this table are written to internal configuration
 config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
+   option Enable 'voice.Network@.Enable'
+   option Registration_Server 'voice.Network@.RegistrarServer'
+   option Outbound_Proxy 'voice.Network@.ProxyServer'
+   option SIP_Port 'voice.Network@.RegistrarServerPort'
+   option SIP_Transport 'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod 'voice.Network@.RegistrationPeriod'
    option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
+   option Reg_Failure_Interval 'voice.Network@.TimerRegistrationFailed'
+   option T1 'voice.Network@.TimerT1'
+   option UserAgentDomain 'voice.Network@.UserAgentDomain'
 
 config VoIPProfile 'map_voip'
    option Enable 'voice.VoIPProfile@.Enable'
@@ -81,13 +73,6 @@ config codecs 'map_codec'
    option ptime 'voice.CodecProfile@.PacketizationPeriod'
    option dtx 'voice.CodecProfile@.SilenceSupression'
 
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
 config extensioninfo 'map_ext'
    option Enable 'voice.Extension@.Enable'
    option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'

evoice/files/etc/evoice/voicero

@@ -22,6 +22,7 @@ config static_prm 'defaults'
    option Tone_On_Hangup '1'
    option BusyTone_On_Hangup '1'
    option Enable_Analouge_Conf '0'
+   option SIP_SessTmrEnable '0'
    option PrackUsage '1'
    option SIP_SupportedPath '0'
    option IMS_Access_Network_Info ' '

evoice/files/etc/init.d/evoice

@@ -5,17 +5,10 @@ STOP=12
 
 USE_PROCD=1
 NAME=evoice
-VOICE_UCI_CONFIG=voice
 
 start_service() {
 	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
 
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
 	procd_open_instance
 	procd_set_param command $NAME
 	procd_set_param respawn "5" "0" "3"
@@ -27,6 +20,3 @@ reload_service() {
 	start
 }
 
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=0ebaf1e7d1f09318ae75d0f475a25280742b790e
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2

gryphon-led-module/Makefile

@@ -28,7 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
+  DEPENDS:= +(TARGET_iopsys_brcm63xx_arm):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -42,27 +42,15 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
 	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	MODULES_SUBDIR:=lib/modules/4.19.183
 	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
 
 	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
 		# These targets use a 64-bit kernel
 		LINUX_KARCH:=arm64
 		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
 	endif
 	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
 	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"

icwmp/Config_cwmp.in

@@ -0,0 +1,30 @@
+choice
+       prompt "Select ACS sever"
+       default CWMP_ACS_MULTI
+       depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "Select HDM as ACS server"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options (deprecated)"
+	depends on PACKAGE_icwmp || \
+		   PACKAGE_icwmp-openssl || \
+		   PACKAGE_icwmp-wolfssl || \
+		   PACKAGE_icwmp-mbedtls
+	default n

icwmp/Makefile

@@ -1,35 +1,55 @@
 #
 # Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.2
+PKG_VERSION:=8.4.8
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=b964edb3570797286584793dbadfbef323cddbeb
+PKG_SOURCE_VERSION:=00d037ce851495aca6365f2189849c6030f305df
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=GPLv2
 PKG_LICENSE_FILES:=LICENSE
 
+PKG_FIXUP:=autoreconf
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml
+endef
+
+define Package/icwmp/config
+	source "$(SOURCE)/Config_cwmp.in"
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+define Package/icwmp
+  $(Package/icwmp/default)
+  TITLE += (internal)
+  VARIANT:=internal
 endef
 
 define Package/icwmp-openssl
@@ -57,15 +77,41 @@ define Package/icwmp-mbedtls
 endef
 
 ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+CONFIGURE_ARGS += --enable-libopenssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+TARGET_LDFLAGS += "-lssl"
 endif
 
 ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+CONFIGURE_ARGS += --enable-libwolfssl
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/wolfssl
+TARGET_LDFLAGS += "-lwolfssl"
 endif
 
 ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+CONFIGURE_ARGS += --enable-libmbedtls
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/
+TARGET_LDFLAGS += "-lmbedtls"
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
 endif
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -82,24 +128,22 @@ define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/95-icwmp-generate-ssl $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
 	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) ./files/etc/udhcpc.user.d/udhcpc_icwmp.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp.user
 endef
 
 Package/icwmp-openssl/install = $(Package/icwmp/default/install)
 Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
 Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
+$(eval $(call BuildPackage,icwmp))
 $(eval $(call BuildPackage,icwmp-openssl))
 $(eval $(call BuildPackage,icwmp-wolfssl))
 $(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -15,9 +15,7 @@ config acs 'acs'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
 	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
@@ -32,7 +30,7 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'

icwmp/files/etc/icwmpd/update.sh

@@ -1,31 +1,99 @@
 #!/bin/sh
-. /lib/functions.sh
 
 log() {
 	echo "$@" |logger -t cwmp.update -p info
 }
 
 handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
+	local defwan vendorspecinf update
+	local fallback_restart
 
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
+	fallback_restart="${1:-0}"
+	update="0"
+	defwan="$(uci -q get cwmp.cpe.default_wan_interface)"
+	vendorspecinf="$(ifstatus "${defwan}" | jsonfilter -e "@.data.vendorspecinf")"
 
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
+	log "Handling dhcp option value [${vendorspecinf}]"
+	[ -n "$vendorspecinf" ] && {
+		local url old_url
+		local prov_code old_prov_code
+		local min_wait_interval old_min_wait_interval
+		local retry_interval_multiplier old_retry_interval_multiplier
 
-	if [ "$ret" == "true" ]; then
-		# read status from var/state/cwmp
-		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
-		if [ "$status" != "running" ]; then
+		old_url="$(uci -q get cwmp.acs.dhcp_url)"
+		old_prov_code="$(uci -q get cwmp.cpe.dhcp_provisioning_code)"
+		old_min_wait_interval="$(uci -q get cwmp.acs.dhcp_retry_min_wait_interval)"
+		old_retry_interval_multiplier="$(uci -q get cwmp.acs.dhcp_retry_interval_multiplier)"
+
+		case $vendorspecinf in
+			http://*|https://*)
+					url="${vendorspecinf}"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                2=*)
+				                        prov_code="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                3=*)
+				                        min_wait_interval="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				                4=*)
+				                        retry_interval_multiplier="$(echo "$optval" | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+
+		if [ -n "$url" ]; then
+			if [ "${url}" != "${old_url}" ]; then
+				log "## icwmp url[${old_url}] changed to [${url}]"
+				uci -q set cwmp.acs.dhcp_url="$url"
+				update=1
+			fi
+		fi
+		if [ -n "$prov_code" ]; then
+			if [ "${prov_code}" != "${old_prov_code}" ]; then
+				log "## icwmp prov_code[${old_prov_code}] changed to [${prov_code}]"
+				uci -q set cwmp.cpe.dhcp_provisioning_code="$prov_code"
+				update=1
+			fi
+		fi
+		if [ -n "$min_wait_interval" ]; then
+			if [ "${min_wait_interval}" != "${old_min_wait_interval}" ]; then
+				log "## icwmp min_wait_interval[${old_min_wait_interval}] changed to [${min_wait_interval}]"
+				uci -q set cwmp.acs.dhcp_retry_min_wait_interval="$min_wait_interval"
+				update=1
+			fi
+		fi
+		if [ -n "$retry_interval_multiplier" ]; then
+			if [ "${retry_interval_multiplier}" != "${old_retry_interval_multiplier}" ]; then
+				log "## icwmp retry_interval_multiplier[${old_retry_interval_multiplier}] changed to [${retry_interval_multiplier}]"
+				uci -q set cwmp.acs.dhcp_retry_interval_multiplier="$retry_interval_multiplier"
+				update=1
+			fi
+		fi
+	}
+
+	# In case of update restart icwmp
+	if [ "${update}" -eq "1" ]; then
+		log "CWMP uci changes, reload cwmp with uci commit"
+		ubus call uci commit '{"config":"cwmp"}'
+	else
+		status="$(ubus call tr069 status |jsonfilter -qe '@.last_session.status')"
+		if [ "$status" = "failure" ]; then
 			log "Trigger out of bound inform, since last inform status was failure"
 			ubus -t 10 call tr069 inform >/dev/null 2>&1
+			# Handle timeout
+			if [ "$?" -eq 7 ]; then
+				log "Restarting icwmp tr069 object"
+				/etc/init.d/icwmpd restart
+			fi
 		fi
-	else
-		log "Restarting icwmp tr069 object"
-		/etc/init.d/icwmpd restart
 	fi
 }
 

icwmp/files/etc/init.d/icwmpd

@@ -15,34 +15,6 @@ log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
-
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
-
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in $cfile)"
-			[ -f ${cert_dir}/${rehash}.0 ] || \
-				ln -s $cfile $cert_dir/${rehash}.0
-		done
-	fi
-}
-
 enable_dhcp_option43() {
 	local wan="${1}"
 
@@ -71,206 +43,6 @@ enable_dhcp_option43() {
 	fi
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
-
-	echo "${val}"
-}
-
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
-
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
-
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ ${class_len} -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ ${class_len} -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network.$intf.sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
-				break
-			fi
-		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-enable_disable_dhcp_option125() {
-	local wan="${1}"
-	local action="${2}"
-
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local sendopts="$(uci -q get network.$wan.sendopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" == "dhcp" ]; then
-		if [ "${action}" == "enable" ]; then
-			if [ ${req125_present} -eq 0 ]; then
-				newreqopts="$reqopts 125"
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 0 ]; then
-				configure_send_op125 "${sendopts}" "${wan}" "network"
-				network_uci_update=1
-			fi
-		else
-			if [ ${req125_present} -eq 1 ]; then
-				newreqopts=$(echo ${reqopts/125/})
-				uci -q set network.$wan.reqopts="$newreqopts"
-				network_uci_update=1
-			fi
-
-			if [ ${send125_present} -eq 1 ]; then
-				for sopt in $sendopts; do
-					if [[ "$sopt" == "$opt125"* ]]; then
-						newsendopts=$(echo ${sendopts/"${sopt}"/})
-						uci -q set network.$wan.sendopts="$newreqopts"
-						network_uci_update=1
-						break
-					fi
-				done
-			fi
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
-	fi
-}
-
 wait_for_resolvfile() {
 	local time=$1
 	local tm=1
@@ -313,8 +85,6 @@ copy_cwmp_varstate_files_to_etc() {
 	fi
 
 	if [ -f /var/state/cwmp ]; then
-		uci -q -c /var/state delete cwmp.sess_status
-		uci -q -c /var/state commit cwmp
 		cp -f /var/state/cwmp /etc/icwmpd/
 	fi
 
@@ -375,16 +145,18 @@ validate_defaults() {
 		return 1;
 	}
 
-	ssl_capath="${ssl_capath%/}"
 	# Put the cert pem file in keep list
 	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
+		if ! grep "${ssl_capath}" /lib/upgrade/keep.d/icwmp; then
 			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
 		fi
 	fi
 
+	[ -z "${url}" ] && [ -z "${dhcp_url}" ] && {
+		log "ACS url is empty can't start"
+		return 1;
+	}
+
 	validate_cpe_section || {
 		log "Validation of cpe section failed"
 		return 1;
@@ -393,51 +165,39 @@ validate_defaults() {
 	return 0;
 }
 
-boot() {
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get dhcp_discovery acs dhcp_discovery "0"
-
-	config_get wan_interface cpe default_wan_interface "wan"
-	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_disable_dhcp_option125 "${wan_interface}" "enable"
-		enable_dnsmasq_option125 "${lan_interface}"
-	else
-		# Remove dhcp option 125 if exists
-		enable_disable_dhcp_option125 "${wan_interface}" "disable"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	start
-}
-
 start_service() {
 	local enable_cwmp
+	local wan_interface
+	local dhcp_discovery
+	local dhcp_url
 
 	config_load cwmp
 	config_get_bool enable_cwmp cpe enable 1
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get dhcp_url acs dhcp_url ''
+	config_get wan_interface cpe default_wan_interface "wan"
 
-	if [ "$enable_cwmp" = "0" ]; then
+	if [ "$enable_cwmp" = "0" ] || [ "$enable_cwmp" = "false" ]; then
+		log "CWMP is not enabled"
 		return 0
 	fi
 
+	# Set dhcp option 43 if dhcp discovery enabled
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		enable_dhcp_option43 "${wan_interface}"
+	fi
+
 	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
 	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
 	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
 
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		if [ -z "${dhcp_url}" ]; then
+			log "Empty dhcp url, running update script"
+			/etc/icwmpd/update.sh
+		fi
+	fi
+
 	validate_defaults || {
 		log "Validation of defaults failed"
 		return 1;
@@ -462,39 +222,10 @@ service_stopped()
 	copy_cwmp_varstate_files_to_etc
 }
 
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
-}
-
 reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so returning
-		return 0
-	fi
-
-	status="$(echo $tr069_status | jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
+	log "Reloading CWMP client"
+	ubus -t 1 call tr069 command '{"command":"reload"}'
+	if [ "$?" -ne "0" ]; then
 		log "Restarting CWMP client"
 		stop
 		start
@@ -511,6 +242,7 @@ service_triggers() {
                                json_add_array
                                        json_add_string "" "run_script"
                                        json_add_string "" "/etc/icwmpd/update.sh"
+                                       json_add_string "" "1"
                                json_close_array
                        json_close_array
                        json_add_int "" "2000"

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,11 +1,7 @@
-#!/bin/sh
-
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
 # Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
+oui=$(uci -q get cwmp.cpe.manufacturer_oui)
 if [ -z "${oui}" ]; then
 	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
 fi
@@ -13,29 +9,24 @@ fi
 oui=$(echo "${oui}" | tr 'a-f' 'A-F')
 
 # Get system serial number.
-config_get serial cpe serial_number ""
+serial=$(uci -q get cwmp.cpe.serial_number)
 if [ -z "${serial}" ]; then
 	serial=$(db -q get device.deviceinfo.SerialNumber)
 fi
 
 # Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
 
 # Only set if they are empty
-if [ -z "${acs_userid}" ]; then
+if [ -z "$acs_userid" ]
+then
     uci -q set cwmp.acs.userid="${oui}-${serial}"
 fi
 
-if [ -z "${cpe_userid}" ]; then
+if [ -z "$cpe_userid" ]
+then
     uci -q set cwmp.cpe.userid="${oui}-${serial}"
 fi
 
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
-fi
-
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/95-icwmp-generate-ssl

@@ -0,0 +1,38 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+regenerate_ssl_link_path()
+{
+        local cert_dir all_file rehash
+
+        cert_dir="${1}"
+
+        all_file=$(ls $cert_dir/*.pem 2>/dev/null)
+
+        [ ! -d "${cert_dir}" ] && return 0;
+        [ ! -f "${all_file}" ] && return 0;
+
+        for cfile in $all_file
+        do
+		rehash="$(openssl x509 -hash -noout -in $cfile)"
+		[ -f ${cert_dir}/${rehash}.0 ] || \
+			ln -s $cfile $cert_dir/${rehash}.0
+        done
+}
+
+regenerate_ssl_link()
+{
+        local cwmp_ca_path
+
+        regenerate_ssl_link_path "/etc/ssl/certs"
+
+        cwmp_ca_path=$(uci -q get cwmp.acs.ssl_capath)
+        if [[ "${cwmp_ca_path}" != "/etc/ssl/certs"* ]]; then
+                if [ -n "${cwmp_ca_path}" ]; then
+                        regenerate_ssl_link_path "${cwmp_ca_path}"
+                fi
+        fi
+}
+
+regenerate_ssl_link

icwmp/files/etc/udhcpc.user.d/udhcpc_icwmp.user

@@ -1,122 +0,0 @@
-#!/bin/sh
-
-CLASS=""
-OUI=""
-SERIAL=""
-
-get_vivsoi() {
-	# opt125 environment variable has data in below format
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |	 enterprise-number1	  |
-	# |				  |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-	# |   data-len1   |		  |
-	# +-+-+-+-+-+-+-+-+ option-data1  |
-	# /				  /
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-	# |	 enterprise-number2	  |   ^
-	# |				  |   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# |   data-len2   |		  | optional
-	# +-+-+-+-+-+-+-+-+ option-data2  |   |
-	# /				  /   |
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
-	# ~	       ...		  ~   V
-	# +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -----
-
-	#  Enterprise Id  Len  Sub Op  SLen  Data Sub Op  SLen Data	  Sub Op  SLen Data
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-	# |	id    |  n  |	1  |  n1  | D1 |   2  |  n2 | D2 | ... |   6  |  n6 | D6 |
-	# +-------------+-----+------+------+----+------+-----+----+-----+------+-----+----+
-
-	local opt125="$1"
-	local len="$2"
-	local ent_id
-
-	#hex-string 2 character=1 Byte
-	# length in hex string will be twice of actual Byte length
-	[ "$len" -gt "8" ] || return
-
-	data="${opt125}"
-	rem_len="${len}"
-	while [ $rem_len -gt 0 ]; do
-		ent_id=${data:0:8}
-		ent_id=$(printf "%d\n" "0x$ent_id")
-
-		if [ $ent_id -ne  3561 ]; then
-			len_val=${data:8:2}
-			data_len=$(printf "%d\n" "0x$len_val")
-			# add 4 byte for ent_id and 1 byte for len
-			data_len=$(( data_len * 2 + 10 ))
-			# move ahead data to next enterprise id
-			data=${data:"${data_len}":"${rem_len}"}
-			rem_len=$(( rem_len - $data_len ))
-			continue
-		fi
-
-		# read the length of enterprise data
-		len_val=${data:8:2}
-		opt_len=$(printf "%d\n" "0x$len_val")
-		[ $opt_len -eq 0 ] && return
-
-		# populate the option data of enterprise id
-		sub_data_len=$(( opt_len * 2))
-		# starting 10 means ahead of length field
-		sub_data=${data:10:"${sub_data_len}"}
-
-		# parsing of suboption of option 125
-		while [ $sub_data_len -gt 0 ]; do
-			# get the suboption id
-			sub_opt_id=${sub_data:0:2}
-			sub_opt_id=$(printf "%d\n" "0x$sub_opt_id")
-
-			# get the length of suboption
-			sub_opt_len=${sub_data:2:2}
-			sub_opt_len=$(printf "%d\n" "0x$sub_opt_len")
-			sub_opt_len=$(( sub_opt_len * 2 ))
-
-			# get the value of sub option starting 4 means starting after length
-			sub_opt_val=${sub_data:4:${sub_opt_len}}
-
-			# assign the value found in sub option
-			case "${sub_opt_id}" in
-				"4") OUI=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"5") SERIAL=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-				"6") CLASS=$(echo -n $sub_opt_val | sed 's/\([0-9A-F]\{2\}\)/\\\\\\x\1/gI' | xargs printf && echo '')
-				;;
-			esac
-
-			# add 2 bytes for sub_opt id and sub_opt len field
-			sub_opt_end=$(( sub_opt_len + 4 ))
-
-			# fetch next sub option hex string
-			sub_data=${sub_data:${sub_opt_end}:${sub_data_len}}
-
-			# update the remaining sub option hex string length
-			sub_data_len=$((sub_data_len - sub_opt_end))
-		done
-
-		break
-	done
-}
-
-wan_intf=$(uci -q get cwmp.cpe.default_wan_interface)
-if [ -n "${wan_intf}" ] && [ "${wan_intf}" == "${INTERFACE}" ]; then
-	if [ -n "$opt125" ]; then
-		len=$(printf "$opt125"|wc -c)
-		get_vivsoi "$opt125" "$len"
-	fi
-
-	sec=$(uci -q -c /var/state get cwmp.gatewayinfo)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q -c /var/state add cwmp gatewayinfo)
-		uci -q -c /var/state rename cwmp."${sec}"="gatewayinfo"
-	fi
-
-	uci -q -c /var/state set cwmp.gatewayinfo.class="$CLASS"
-	uci -q -c /var/state set cwmp.gatewayinfo.oui="$OUI"
-	uci -q -c /var/state set cwmp.gatewayinfo.serial="$SERIAL"
-	uci -q -c /var/state commit cwmp
-fi

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
 /var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp

ieee1905/Config.in

@@ -1,6 +1,6 @@
 if (PACKAGE_ieee1905)
 
-menu "Configuration"
+menu "Configurations"
 
 config IEEE1905_EXTENSION_ALLOWED
 	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
@@ -10,18 +10,5 @@ config IEEE1905_PLATFORM_HAS_WIFI
 	bool "Platform has WiFi"
 	default y if PACKAGE_libwifi
 
-config IEEE1905_CMDU_SA_IS_ALMAC
-	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
-	default n
-
-config IEEE1905_WIFI_EASYMESH
-	bool "Include WiFi-Alliance's Easymesh updates"
-	default y
-
-config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
-	default y
-
 endmenu
-
 endif

ieee1905/Config.map-plugin.in

@@ -0,0 +1,14 @@
+if (PACKAGE_map-plugin)
+
+menu "Configurations"
+
+config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
+	bool "Sync configuration between dynamic controllers in the network"
+	default n
+
+config MULTIAP_FUZZ_1905_CMDUS
+	bool "Include support to fuzz 1905 CMDUs for testing purpose"
+	default n
+
+endmenu
+endif

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=6.0.16
+PKG_VERSION:=4.9.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=3b12bdd1b0e75f4e5b744e18f00ab5ac703382e6
+PKG_SOURCE_VERSION:=69b27e3e1509b9192c529fbba6a329cc0532cfbb
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -35,21 +35,31 @@ define Package/ieee1905/config
 endef
 
 define Package/libieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=libieee1905.so (library for CMDU and TLV handling)
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= (library for CMDU and TLV handling)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
 	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
   DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
 	   +libjson-c +libblobmsg-json +ubus +libpthread \
 	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
 endef
 
-include $(wildcard plugins/*.mk)
+
+define Package/map-plugin
+$(call Package/ieee1905/Default,$(1))
+  TITLE:=Multi-AP (Easymesh) plugin
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/map-plugin/config
+  source "$(SOURCE)/Config.map-plugin.in"
+endef
 
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
@@ -59,15 +69,6 @@ define Package/libieee1905/description
  This package provides library functions for IEEE Std 1905.1 stack.
 endef
 
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugin),map) \
-	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
-	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
-
-
-ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
-
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
@@ -77,20 +78,10 @@ ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
 TARGET_CFLAGS += -DHAS_WIFI
 endif
 
-ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
-TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
+ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
+TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
 endif
 
-ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
-TARGET_CFLAGS += -DWIFI_EASYMESH
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
-TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-endif
-
-MAKE_FLAGS += \
-	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
 
 MAKE_PATH:=src
 
@@ -109,6 +100,25 @@ define Package/libieee1905/install
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 endef
 
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+
 define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
@@ -126,7 +136,7 @@ endef
 
 define Build/InstallDev
 	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
+	$(call Build/InstallDev/map-plugin,$(1),$(2))
 endef
 
 ifeq ($(LOCAL_DEV),1)
@@ -137,4 +147,4 @@ endif
 
 $(eval $(call BuildPackage,ieee1905))
 $(eval $(call BuildPackage,libieee1905))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))
+$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -2,7 +2,7 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	option registrar '2 5 6'
+	option registrar '2 5'
 #	option macaddress '0a:1b:2c:3d:4e:50'
 
 config al-iface
@@ -24,9 +24,3 @@ config ap
 	option encryption 'sae-mixed'
 	option key '1234567890'
 
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-

ieee1905/files/etc/init.d/ieee1905

@@ -42,7 +42,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
+			'band:or("2", "5", "60")' \
 			'ssid:string' \
 			'encryption:or("psk2", "sae-mixed", "sae", string)' \
 			'key:string' \
@@ -82,10 +82,8 @@ start_service() {
 	validate_ieee1905_config || return 1;
 
 	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
+        procd_set_param command "/usr/sbin/ieee1905d"
 	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param env IEEE1905_LOG_CMDU=1
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1
 	procd_close_instance

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

ieee1905/plugins/map.mk

@@ -1,51 +0,0 @@
-define Package/map-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/map-plugin/config
-	if (PACKAGE_map-plugin)
-
-		menu "Configuration"
-
-		config MULTIAP_EASYMESH_VERSION
-		int "Easymesh version"
-		default 2
-
-		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-		bool "Sync configuration between dynamic controllers in the network"
-		default n
-
-		config MULTIAP_FUZZ_1905_CMDUS
-		bool "Include support to fuzz 1905 CMDUs for testing purpose"
-		default n
-
-		endmenu
-	endif
-endef
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
-
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef

ieee1905/plugins/snoop.mk

@@ -1,12 +0,0 @@
-define Package/snoop-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Show all received 1905 CMDUs over UBUS
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/snoop-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
-endef

ieee1905/plugins/topology.mk

@@ -1,12 +0,0 @@
-define Package/topology-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Build full network topology of the 1905 nodes only
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/topology-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
-endef

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.2.2
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/config

@@ -18,21 +18,8 @@ CONFIG_TARGET_ROOTFS_TARGZ=y
 # /etc/banner and /etc/device_info #
 CONFIG_IMAGEOPT=y
 CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="IOPSYS"
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
 CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-CONFIG_VERSION_DIST="IOWRT"
-
-# OpenWrt is given by CONFIG_VERSION_NUMBER which we do not want to override.
-# disabling CONFIG_VERSION_FILENAMES will hide the OpenWrt version from the image filename
-# CONFIG_VERSION_FILENAMES is not set
-
-# CONFIG_VERSION_CODE is set to the IOWRT version instead by the genconfig-script and
-# CONFIG_VERSION_CODE_FILENAMES will put it into the image filename.
-CONFIG_VERSION_CODE_FILENAMES=y
-
-CONFIG_VERSION_HOME_URL="https://iopsys.eu"
-CONFIG_VERSION_BUG_URL="https://iopsys.eu"
-CONFIG_VERSION_SUPPORT_URL="https://iopsys.eu"
 
 # /lib/preinit #
 CONFIG_PREINITOPT=y
@@ -57,13 +44,12 @@ CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
 # EasySoC HAL #
 CONFIG_PACKAGE_inbd=y
 CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_peripheral_manager=y
 CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_wifimngr=y
 
 # Multi-AP #
 CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-agent=m
-CONFIG_PACKAGE_map-controller=m
 CONFIG_PACKAGE_map-topology=y
 CONFIG_PACKAGE_wfadatad-collector=y
 
@@ -76,7 +62,6 @@ CONFIG_PACKAGE_urlfilter=y
 CONFIG_PACKAGE_imonitor=m
 CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_usermngr=y
 
 # TR-x69 #
 CONFIG_PACKAGE_uspd-mbedtls=y
@@ -130,8 +115,7 @@ CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_atftp=m
 CONFIG_PACKAGE_atftpd=m
 CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_dnsmasq=y
-CONFIG_PACKAGE_miniupnpd-iptables=y
+CONFIG_PACKAGE_miniupnpd=y
 CONFIG_PACKAGE_mosquitto-client-ssl=y
 CONFIG_PACKAGE_mosquitto-ssl=y
 CONFIG_PACKAGE_nginx=y
@@ -149,11 +133,10 @@ CONFIG_LIBCURL_CRYPTO_AUTH=y
 # CONFIG_LIBCURL_MBEDTLS is not set
 CONFIG_LIBCURL_OPENSSL=y
 CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_ip-bridge=y
 CONFIG_PACKAGE_ip-full=y
 CONFIG_PACKAGE_iperf3=y
 CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables-zz-legacy=y
+CONFIG_PACKAGE_iptables=y
 CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
@@ -178,7 +161,6 @@ CONFIG_PACKAGE_lscpu=y
 CONFIG_PACKAGE_nand-utils=y
 CONFIG_PACKAGE_openssl-util=y
 CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_procd-ujail=m
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
 CONFIG_PACKAGE_rpcd-mod-rrdns=y
@@ -302,10 +284,3 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
-
-# Use fw3 iptables-based instead of newer nftables-based fw4
-# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
-# Enabling luci-app-firewall enables fw4
-# CONFIG_PACKAGE_luci-app-firewall is not set
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set

iop/scripts/feeds_update.sh

@@ -2,65 +2,57 @@
 
 function feeds_update {
 
-	developer=0
-	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
-		case $opt in
-		n)
-			override=0
-			;;
-		esac
-	done
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
-	fi
+    cp .config .genconfig_config_bak
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
 	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-	fi
+    fi
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
+    # targets need to be installed explicitly
+    for target in $(ls ./feeds/targets)
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# Workaround for bug in 22.03.0-rc4 where installed target path has been
-	# moved to target/linux/feeds but Config.in and Makefile from installed
-	# targets are not properly included from the new location.
-	# This hack is to be removed once the issues are fixed.
-	# Note that the above block of code might no longer necessary because
-	# targets no longer need to be installed explicitly.
-	echo "Working around installed-target-bug"
-	for f in target/linux/feeds/*; do
-		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
-	done
+    # install all packages
+    ./scripts/feeds install -a
 
-	# install all packages
-	./scripts/feeds install -a
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	cp .genconfig_config_bak .config
-	make defconfig
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap
-
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -13,13 +13,11 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	ramips_feed="target/linux/feeds/iopsys-ramips"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -85,8 +83,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -109,23 +107,19 @@ function genconfig {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $ramips_feed/genconfig ] &&
-			iopsys_ramips=$(cd $ramips_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca iopsys_ramips airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -134,10 +128,10 @@ function genconfig {
 			return
 	    fi
 
-	    for p in $brcmbca; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -145,15 +139,15 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			target_config_path="$ramips_feed/config"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $airoha; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
@@ -161,7 +155,7 @@ function genconfig {
 	    for p in $iopsys_x86; do
 		if [ $p == $profile ]; then
 		    target="iopsys_x86"
-			target_config_path="$x86_feed/config"
+			target_config_path="$x86/config"
 		    return
 		fi
 	    done
@@ -169,23 +163,7 @@ function genconfig {
 	    for p in $iopsys_armvirt; do
 		if [ $p == $profile ]; then
 		    target="iopsys_armvirt"
-			target_config_path="$armvirt_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $ipq95xx; do
-		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
+			target_config_path="$armvirt/config"
 		    return
 		fi
 	    done
@@ -341,25 +319,19 @@ function genconfig {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES 
-		case "$target" in
-		iopsys_ramips | airoha | iopsys_mediatek | brcmbca | ipq95xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -388,15 +360,12 @@ function genconfig {
 		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always --dirty --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected

iop/scripts/genconfig_min.sh

@@ -12,13 +12,11 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	ramips_feed="target/linux/feeds/iopsys-ramips"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	econet="target/linux/iopsys-econet"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -84,8 +82,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -108,23 +106,19 @@ function genconfig_min {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $ramips_feed/genconfig ] &&
-			iopsys_ramips=$(cd $ramips_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca iopsys_ramips airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_econet iopsys_x86 iopsys_armvirt; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -133,10 +127,10 @@ function genconfig_min {
 			return
 	    fi
 
-	    for p in $brcmbca; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
@@ -144,15 +138,15 @@ function genconfig_min {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			target_config_path="$ramips_feed/config"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
 
-	    for p in $airoha; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
@@ -160,7 +154,7 @@ function genconfig_min {
 	    for p in $iopsys_x86; do
 		if [ $p == $profile ]; then
 		    target="iopsys_x86"
-			target_config_path="$x86_feed/config"
+			target_config_path="$x86/config"
 		    return
 		fi
 	    done
@@ -168,23 +162,7 @@ function genconfig_min {
 	    for p in $iopsys_armvirt; do
 		if [ $p == $profile ]; then
 		    target="iopsys_armvirt"
-			target_config_path="$armvirt_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_mediatek; do
-		if [ $p == $profile ]; then
-		    target="iopsys_mediatek"
-			target_config_path="$mediatek_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $ipq95xx; do
-		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
+			target_config_path="$armvirt/config"
 		    return
 		fi
 	    done
@@ -332,25 +310,19 @@ function genconfig_min {
 		fi
 
 		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		iopsys_ramips | airoha | iopsys_mediatek | brcmbca | ipq95xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		if [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -379,15 +351,12 @@ function genconfig_min {
 		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always --dirty --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected

iop/scripts/install_key.sh

@@ -48,10 +48,7 @@ function ssh_install_key {
     local keys="$(get_ssh_public_keys)"
     echo "Adding the following keys to $DROPBEAR_AUTHORIZED_KEYS_FILE on $host:"
     echo "$keys"
-    ssh \
-        -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
-        root@$host \
-        "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
+    ssh root@$host "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
 }
 
 register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/iopupgrade.sh

@@ -1,283 +1,344 @@
 # this is a developer helper script to install firmware on a remote host with SSH
 
 function upd_usage {
-	echo "usage: $0 ssh_upgrade [-t <host>] [-f <file>] [opts] "
-	echo ""
-	echo "   Default host is 192.168.1.1"
-	echo "   Default firmware file is the latest one (last.{itb,pkgtb})"
-	echo "   Default is to not keep configuration"
-	echo "opts:"
-	echo ""
-	echo "	-i	Interactive use, allows to select firmware file"
-	echo "	-n	Do not do the final reboot of the target board"
-	echo "	-c	Keep configuration"
-	echo "	-x	Force install even if firmware is not for this board"
-	echo "	-b	Force install of bootloader regardless of version installed"
+    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
+    echo ""
+    echo "   Default host is 192.168.1.1"
+    echo "   Default firmware file is the newest one found"
+    echo "   Default is to not keep configuration"
+    echo "opts:"
+    echo ""
+    echo "	-i	Interactive use, Allows to select firmware file"
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
 }
 
 function set_config_string {
-	eval $(grep $1 .config)
+    eval `grep $1 .config`
 }
 
 function upd_ask_ok {
-	echo "Will continue with the following settings:"
-	echo "-----------------------------------------"
-	printf "%20s: %s\n" "Firmware file" "$upd_fw_base"
-	printf "%20s: %s\n" "Host IP" "$upd_host"
-	printf "%20s: " "Reboot"
-	if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Keep config"
-	if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force bootloader"
-	if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force image upgrade"
-	if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	echo "-----------------------------------------"
+    echo "Will Continue with the following settings"
+    echo "-----------------------------------------"
+    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
+    printf "%20s: %s\n"  "Host ip" "$upd_host"
+    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    echo "-----------------------------------------"
 
-	echo -n "Continue? [Y/n/q]:"
-	read answer
+    if [ "$upd_sysupgrade" == "0" ]
+       then
+	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
+    fi
 
-	case $answer in
-	n | N)
-		return 1
-		;;
-	q | Q)
-		exit 1
-		;;
-	y | Y | *)
-		return 0
-		;;
-	esac
+    echo -n "Continue? [Y/n/q]:"
+    read answer
+
+    case $answer in
+	n|N)
+	    return 1;;
+	q|Q)
+	    exit 1;;
+	y|Y|*)
+	    return 0;;
+    esac
 }
 
 function upd_select_file {
-	dialog --keep-tite --title "To select a file, use TAB/ARROW to highlight then press SPACEBAR -> RETURN" \
-		--fselect "${upd_fw:-bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/}" \
-		$((lines - 10)) $((cols - 5)) \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_fw="$new_file"
-		upd_fw_base=$(basename $upd_fw)
-	fi
+    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
+	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
+	   $((lines -10)) $((cols -5)) \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_fw="$new_file"
+	upd_fw_base=$(basename $upd_fw);
+    fi
 }
 
 function upd_select_target {
-	dialog --keep-tite --title "Input the hostname/IP of the target board" \
-		--inputbox "Name/IP" \
-		$((lines - 10)) $((cols - 5)) \
-		"$upd_host" \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_host="$new_file"
-	fi
+    dialog --keep-tite --title "Input the name/ip number of target board" \
+	   --inputbox "Name/IP" \
+	   $((lines -10)) $((cols -5)) \
+	   "$upd_host" \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_host="$new_file"
+    fi
 }
 
-function upd_select_reboot {
-	dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Reboot" "Restart board after done" $(if [ "$upd_noreboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		"No reboot" "Continue running old system" $(if [ "$upd_noreboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+function upd_select_reboot {
+    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
 	"No reboot")
-		upd_noreboot=1
-		;;
+	    upd_noreboot=1
+	;;
 	"Reboot")
-		upd_noreboot=0
-		;;
-	esac
+	    upd_noreboot=0
+	    ;;
+    esac
 }
 
 function upd_select_config {
-	dialog --keep-tite --radiolist "Should the configuration be kept" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Keep" "Keep the config from old system" $(if [ "$upd_keepconf" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Default" "Use default config for new system" $(if [ "$upd_keepconf" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the configuration be keept" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Keep")
-		upd_keepconf=1
-		;;
+	    upd_keepconf=1
+	    ;;
 	"Default")
-		upd_keepconf=0
-		;;
-	esac
+	    upd_keepconf=0
+	    ;;
+    esac
 }
 
 function upd_select_forceboot {
-	dialog --keep-tite --radiolist "Should the boot loader be updated regardless of the version installed" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Always update boot loader" $(if [ "$upd_forceboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Version check" "Only upgrade if version is newer" $(if [ "$upd_forceboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceboot=1
-		;;
+	    upd_forceboot=1
+	    ;;
 	"Version check")
-		upd_forceboot=0
-		;;
-	esac
+	    upd_forceboot=0
+	    ;;
+    esac
 }
 
 function upd_select_forceimage {
-	dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Disable sanity check and force use of image (dangerous)" $(if [ "$upd_forceimage" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Only compatible" "Normal checks apply" $(if [ "$upd_forceimage" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceimage=1
-		;;
+	    upd_forceimage=1
+	    ;;
 	"Only compatible")
-		upd_forceimage=0
-		;;
-	esac
+	    upd_forceimage=0
+	    ;;
+    esac
+}
+
+function upd_select_sysupgrade {
+    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
+	"iopu")
+	    upd_sysupgrade=0
+	    ;;
+	"sysupgrade")
+	    upd_sysupgrade=1
+	    ;;
+    esac
 }
 
 function upd_select {
-	dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select item to change" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Firmware file" "$upd_fw_base" \
-		"Host IP" "$upd_host" \
-		"Reboot" $(if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Keep config" $(if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force bootloader" $(if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force image upgrade" $(if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		2>$tempfile
 
-	case $(cat $tempfile) in
-	"Firmware file")
-		upd_select_file
-		;;
-	"Host IP")
-		upd_select_target
-		;;
+    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Firmare file" "$upd_fw_base"\
+	   "Host ip" "$upd_host" \
+	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   2> $tempfile
+
+
+    case $(cat $tempfile) in
+	"Firmare file")
+	    upd_select_file
+	    ;;
+	"Host ip")
+	    upd_select_target
+	    ;;
 	"Reboot")
-		upd_select_reboot
-		;;
+	    upd_select_reboot
+	    ;;
 	"Keep config")
-		upd_select_config
-		;;
+	    upd_select_config
+	    ;;
 	"Force bootloader")
-		upd_select_forceboot
-		;;
+	    upd_select_forceboot
+	    ;;
 	"Force image upgrade")
-		upd_select_forceimage
-		;;
+	    upd_select_forceimage
+	    ;;
+	"sysupgrade")
+	    upd_select_sysupgrade
+	    ;;
 	*)
-		return
-		;;
-	esac
-	upd_select
+	    return
+	;;
+    esac
+    upd_select
 }
 function upd_select_start {
-	lines=$(tput lines)
-	cols=$(tput cols)
-	tempfile="$(mktemp)"
-	trap "rm -f $tempfile" 0 1 2 5 15
-	upd_select
+    lines=$(tput lines)
+    cols=$(tput cols)
+    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
+    trap "rm -f $tempfile" 0 1 2 5 15
+    upd_select
 
 }
 
 function ssh_upgrade {
-	upd_noreboot=0
-	upd_forceboot=0
-	upd_keepconf=0
-	upd_forceimage=0
-	upd_fw_base=""
-	upd_fw=""
-	upd_host="192.168.1.1"
-	do_dialog=0
+    upd_noreboot=0
+    upd_forceboot=0
+    upd_keepconf=0
+    upd_forceimage=0
+    upd_fw_base=""
+    upd_fw=""
+    upd_host="192.168.1.1"
+    upd_sysupgrade=1
+    do_dialog=0
 
-	while getopts "f:hnxt:icb" opt; do
-		case $opt in
-		n)
-			upd_noreboot=1
-			;;
-		x)
-			upd_forceimage=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		c)
-			upd_keepconf=1
-			;;
-		v)
-			verbose=$OPTARG
-			;;
-		f)
-			upd_fw=$OPTARG
-			;;
-		t)
-			upd_host=$OPTARG
-			;;
-		i)
-			do_dialog=1
-			;;
-		h)
-			upd_usage
-			exit 1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-		esac
-	done
-
-	if [ -z "$upd_fw" ]; then
-		set_config_string CONFIG_TARGET_BOARD
-		set_config_string CONFIG_TARGET_SUBTARGET
-		upd_fw="$(realpath -q --canonicalize-existing --relative-to=. "bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/"last.{pkgtb,itb})"
-		if [ -z "$upd_fw" ] && [ $do_dialog -eq 0 ]; then
-			echo "Could not find image. Check that last.{itb,pkgtb} exists or specify an image using -f <image> or -i (interactive)." >&2
-			return 1
-		fi
-	fi
-	upd_fw_base="$(basename "$upd_fw")"
-
-	[ $do_dialog -eq 1 ] && upd_select_start
-
-	if ! upd_ask_ok; then
-		upd_select_start
-		if ! upd_ask_ok; then
-			exit 1
-		fi
-	fi
-
-	if [ ! -f $upd_fw ]; then
-		echo "Firmware file $firmware does not exist."
+    while getopts "f:hnxt:iscb" opt; do
+	case $opt in
+	    n)
+		upd_noreboot=1
+		;;
+	    x)
+		upd_forceimage=1
+		;;
+	    b)
+		upd_forceboot=1
+		;;
+	    c)
+		upd_keepconf=1
+		;;
+	    v)
+		verbose=$OPTARG
+		;;
+	    f)
+		upd_fw=$OPTARG
+		;;
+	    t)
+		upd_host=$OPTARG
+		;;
+	    i)
+		do_dialog=1
+		;;
+	    s)
+		upd_sysupgrade=1
+		;;
+	    h)
+		upd_usage
 		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -n "$upd_fw" ]
+    then
+	upd_fw_base=$(basename $upd_fw);
+    else
+	set_config_string CONFIG_TARGET_BOARD
+	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
+
+	# if target uses pkgtb
+	if [ -z "$firmwares"]
+	then
+	    # pkgtb files can not be streamed so copy over the file witch scp
+	    use_scp=1
+	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
 	fi
 
-	extra_args=""
-	[ $upd_noreboot -eq 1 ] && extra_args="$extra_args --no-reboot"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args --force"
-	[ $upd_keepconf -eq 0 ] && extra_args="$extra_args -n"
-	[ $upd_forceboot -eq 1 ] && extra_args="$extra_args --force-loader-upgrade"
+	for upd_fw_base in $firmwares
+	do
+	    #echo "firmware $upd_fw"
+	    break
+	done
+	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
+    fi
 
-	pv "$upd_fw" |
-		ssh \
-			-o ConnectTimeout=60 \
-			-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
-			root@"$upd_host" \
-			sh -c "cat > '/tmp/$upd_fw_base' && (set -x && sysupgrade -v $extra_args /tmp/$upd_fw_base)" ||
-		echo "Sysupgrade failed" >&2 && return 1
+    [ $do_dialog -eq 1 ] && upd_select_start
+
+    if ! upd_ask_ok
+    then
+	upd_select_start
+	if ! upd_ask_ok
+	then
+	    exit 1
+	fi
+    fi
+
+    if [ ! -f $upd_fw ]
+    then
+	echo "firmware file $firmware do not exist"
+	exit 1
+    fi
+
+    if [ $upd_sysupgrade -eq 0 ]
+    then
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
+	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
+	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
+
+	file_size_kb=`du -k "$upd_fw" | cut -f1`
+	if [ "$use_scp" == "1" ]
+	then
+	    scp $upd_fw root@$upd_host:/tmp/ &&
+		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
+	else
+	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
+	fi
+    else
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
+	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
+
+	scp $upd_fw root@$upd_host:/tmp/ &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    echo "sysupgrade done!"
+    fi
 }
 
-register_command "ssh_upgrade" "-t <host> -f <file> [opts]  Install firmware on remote host with SSH"
+register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
+
+

libmicroxml/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libmicroxml
+PKG_VERSION:=2012-06-11
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mirror/microxml.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_LICENSE:=LGPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libmicroxml
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=XML library
+  MAINTAINER:=Luka Perkov <luka@openwrt.org>
+endef
+
+define Package/libmicroxml/description
+ A micro sized XML library
+endef
+
+CONFIGURE_ARGS += \
+	--disable-threads \
+	--enable-static \
+	--enable-shared
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
+endef
+
+define Package/libmicroxml/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -0,0 +1,130 @@
+diff --git a/mxml-file.c b/mxml-file.c
+index 02eca9d..f10d202 100644
+--- a/mxml-file.c
++++ b/mxml-file.c
+@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
+   * Write the node...
+   */
+ 
+-  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
++  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
++    global_free(global);
+     return (-1);
+-
++  }
++  
++  global_free(global);
+   if (col > 0)
+     if (putc('\n', fp) < 0)
+       return (-1);
+@@ -1448,6 +1451,7 @@ mxml_load_data(
+   if ((buffer = malloc(64)) == NULL)
+   {
+     mxml_error("Unable to allocate string buffer!");
++    global_free(global);
+     return (NULL);
+   }
+ 
+@@ -2083,11 +2087,12 @@ mxml_load_data(
+ 		 node->parent ? node->parent->value.element.name : "(null)");
+ 
+       mxmlDelete(first);
+-
++      global_free(global);
+       return (NULL);
+     }
+   }
+ 
++  global_free(global);
+   if (parent)
+     return (parent);
+   else
+@@ -2102,7 +2107,7 @@ error:
+   mxmlDelete(first);
+ 
+   free(buffer);
+-
++  global_free(global);
+   return (NULL);
+ }
+ 
+diff --git a/mxml-private.c b/mxml-private.c
+index 4378ca3..ea6e452 100644
+--- a/mxml-private.c
++++ b/mxml-private.c
+@@ -41,6 +41,32 @@
+  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
+  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
+  */
++void *global_mem[16] = {0};
++
++static void *global_calloc(int x, int size)
++{
++  int i;
++  void *m = calloc(x, size);
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
++    global_mem[i] = global_mem[i-1];
++  }
++  global_mem[0] = m;
++  return m;
++}
++
++void global_free(void *m)
++{
++  int i;
++  if (m == NULL)
++    return;
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
++    if (global_mem[i] == m) {
++      global_mem[i] = NULL;
++      free(m);
++      break;
++    }
++  }
++}
+ 
+ #if defined(__sun) || defined(_AIX)
+ #  pragma fini(_mxml_fini)
+@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
+   return (MXML_REAL);
+ }
+ 
+-
+ #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
+ #  include <pthread.h>
+ 
+@@ -190,7 +215,6 @@ _MXML_FINI(void)
+   }
+ }
+ 
+-
+ /*
+  * '_mxml_global()' - Get global data.
+  */
+@@ -205,7 +229,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+     pthread_setspecific(_mxml_key, global);
+ 
+     global->num_entity_cbs = 1;
+@@ -288,7 +312,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+ 
+     global->num_entity_cbs = 1;
+     global->entity_cbs[0]  = _mxml_entity_cb;
+diff --git a/mxml-private.h b/mxml-private.h
+index c591208..72ed338 100644
+--- a/mxml-private.h
++++ b/mxml-private.h
+@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
+ extern _mxml_global_t	*_mxml_global(void);
+ extern int		_mxml_entity_cb(const char *name);
+ 
++extern void global_free(void *m);

libvoice-broadcom/Makefile

@@ -1,61 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libvoice-broadcom
-PKG_VERSION:=0.1
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-LOCAL_SRC_DIR:=~/git/voip/$(PKG_NAME)
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=b53e93ca1a2fdda56ca9caffb6020e158e684f3d
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-LIBVOICE_PKG_BUILD_DIR := $(PKG_BUILD_DIR)
-
-export CONFIG_BRCM_SDK_VER_504040
-export CONFIG_BCM_CHIP_ID
-
-include $(INCLUDE_DIR)/package.mk
-
-TARGET_CFLAGS += -Wall -Werror
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=IOPSYS libvoice for Broadcom
-	URL:=
-	DEPENDS:=
-endef
-
-define Package/$(PKG_NAME)/description
-	Libvoice is a library that provides a uniform set of APIs and data types with hardware abstract layer for DSP/SLIC from different vendors
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* $(LOCAL_SRC_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	# Although there is nothing needs to be installed, but the install section must NOT be empty. Otherwise the package will be skipped as below.
-	# WARNING: skipping libvoice-broadcom -- package has no install section
-	$(INSTALL_DIR) $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
-

libvoice-d2/Makefile

@@ -1,58 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libvoice-d2
-PKG_VERSION:=0.1
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-LOCAL_SRC_DIR:=~/git/voip/$(PKG_NAME)
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/$(PKG_NAME).git
-PKG_SOURCE_VERSION:=45e7d35f97f258f5e13c3afa0542db724bf59828
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-LIBVOICE_PKG_BUILD_DIR := $(PKG_BUILD_DIR)
-
-include $(INCLUDE_DIR)/package.mk
-
-TARGET_CFLAGS += -Wall -Werror
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=IOPSYS libvoice for D2 which is software DSP
-	URL:=
-	DEPENDS:=
-endef
-
-define Package/$(PKG_NAME)/description
-	Libvoice is a library that provides a uniform set of APIs and data types with hardware abstract layer for DSP/SLIC from different vendors
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* $(LOCAL_SRC_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	# Although there is nothing needs to be installed, but the install section must NOT be empty. Otherwise the package will be skipped as below.
-	# WARNING: skipping libvoice-d2 -- package has no install section
-	$(INSTALL_DIR) $(1)/usr/lib
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
-

map-agent/Config.in

@@ -13,25 +13,5 @@ config AGENT_ISLAND_PREVENTION
 config AGENT_EASYMESH_R2_CERT
 	bool "Compile for WFA test bed"
 
-config AGENT_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 2
-
-config AGENT_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config AGENT_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default AGENT_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through AGENT_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-agent/Makefile

@@ -1,16 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020-21 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-agent
-PKG_VERSION:=2.10.4.11
+PKG_VERSION:=7.2.1
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=0852c7803475f7fb919f680d02437ba9672c42fc
+PKG_SOURCE_VERSION:=b3e3a21c9a938ce719a0ea609c965852586d6778
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
@@ -28,7 +28,7 @@ define Package/map-agent
   CATEGORY:=Utilities
   TITLE:=WiFi multi-AP Agent (EasyMesh R2)
   DEPENDS:=+libwifi +libuci +libubox +ubus +libeasy +libieee1905 +ieee1905 \
-	  +map-plugin +ip-bridge
+	  +map-plugin
 endef
 
 
@@ -56,11 +56,8 @@ endef
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-Wno-error=deprecated-declarations \
 	-D_GNU_SOURCE
 
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_AGENT_EASYMESH_VERSION)
-
 ifeq ($(CONFIG_AGENT_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DAGENT_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
@@ -73,12 +70,6 @@ ifeq ($(CONFIG_AGENT_EASYMESH_R2_CERT),y)
 TARGET_CFLAGS += -DEASYMESH_R2_CERT
 endif
 
-ifeq ($(CONFIG_AGENT_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_AGENT_EASYMESH_VENDOR_EXT_OUI)\\\"
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT
-endif
-
-
 MAKE_PATH:=src
 
 define Package/map-agent/install
@@ -86,8 +77,6 @@ define Package/map-agent/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/lib/wifi
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/script/* $(1)/lib/wifi/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapagent $(1)/usr/sbin/
 endef
 

map-agent/files/etc/config/mapagent

@@ -7,11 +7,9 @@ config agent 'agent'
 	option island_prevention '0'
 	option eth_onboards_wifi_bhs '0'
 #	option controller_macaddr '0a:1b:2c:3d:4e:50'
-	option scan_on_boot_only '0'
 
 config dynamic_backhaul
 	option missing_bh_timer '60'
-	option missing_bh_reconfig_timer '1800'
 
 config controller_select
 	option id 'auto'

map-agent/files/etc/hotplug.d/ethernet/map-dynamic-backhaul

@@ -3,7 +3,7 @@
 . /lib/network/utils.sh
 
 conn_ports_file="/tmp/map.connected.ports"
-map_bh_file="/var/run/multiap/multiap.backhaul"
+map_bh_file="/tmp/multiap.backhaul"
 al_bridge="$(uci -q get mapagent.agent.al_bridge)"
 [ "${al_bridge:0:3}" = "br-" ] || exit 0
 al_brnet="${al_bridge:3}"

map-agent/files/etc/init.d/mapagent

@@ -10,9 +10,56 @@ IS_CFG_VALID=1
 MAP_DEV="map_dev"
 MAP_IF="map"
 
+create_map() {
+	ip link add lei type veth peer name lei_map 2>/dev/null
+	ip link add link lei name lei_lan type vlan id 1 2>/dev/null
+
+	uci -q set network.${MAP_DEV}=device
+	uci -q set network.${MAP_DEV}.name=br-map
+	uci -q set network.${MAP_DEV}.type=bridge
+
+	uci -q show network.${MAP_DEV}.ports | grep -q lei_map || {
+		uci -q add_list network.${MAP_DEV}.ports='lei_map'
+	}
+
+	uci -q set network.${MAP_IF}=interface
+	uci -q set network.${MAP_IF}.device=br-map
+	uci -q set network.${MAP_IF}.is_lan=1
+
+	uci -q show network.br_lan.ports | grep -q lei_lan || {
+		uci -q add_list network.br_lan.ports="lei_lan"
+	}
+
+	uci -q set mapagent.agent.al_bridge=br-map
+
+	uci -q commit
+
+	ubus call network reload
+	ubus -t 5 wait_for network.interface.map
+
+	brctl addif br-map lei_map 2>/dev/null
+	brctl addif br-lan lei_lan 2>/dev/null
+
+	ip link set lei up 2>/dev/null
+	ip link set lei_map up 2>/dev/null
+	ip link set lei_lan up 2>/dev/null
+}
+
+remove_map() {
+	ip link delete ${MAP_VETH} &>/dev/null
+
+	uci -q delete network.${MAP_DEV}
+	uci -q delete network.${MAP_IF}
+
+	uci -q set mapagent.agent.al_bridge=br-lan
+
+	uci -q commit
+
+	ubus call network reload
+}
 
 start_dynbhd_service() {
-	rm -f /var/run/multiap/multiap.backhaul
+	rm -f /tmp/multiap.backhaul
 	procd_open_instance
 	procd_set_param command "/usr/sbin/dynbhd"
 	procd_set_param respawn
@@ -33,9 +80,7 @@ validate_agent_section() {
 		'vlan_segregation:bool:false' \
 		'resend_num:uinteger:0' \
 		'dyn_cntlr_sync:bool:true' \
-		'island_prevention:bool:false' \
-		'eth_onboards_wifi_bhs:bool:false' \
-		'scan_on_boot_only:bool:false'
+		'island_prevention:bool:true'
 
 
 	[ "$?" -ne 0 ] && {
@@ -70,7 +115,7 @@ validate_ap_section() {
 	uci_validate_section mapagent $section "${1}" \
 			'ifname:string' \
 			'device:string' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'enabled:bool:true' \
 			'onboarded:bool:false' \
 			'ssid:string' \
@@ -92,7 +137,7 @@ validate_radio_section() {
 
 	uci_validate_section mapagent $section "${1}" \
 			'device:string' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'configured:bool:false' \
 			'onboarded:bool:false' \
 			'dedicated_backhaul:bool:false' \
@@ -103,8 +148,7 @@ validate_radio_section() {
 			'include_sta_stats:bool:false' \
 			'include_sta_metric:bool:false' \
 			'rcpi_hysteresis_margin:range(0,255)' \
-			'report_util_threshold:range(0,255)' \
-			'encryption:or("sae", "psk2", "sae-mixed")'
+			'report_util_threshold:range(0,255)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of radio section failed"
@@ -141,8 +185,6 @@ validate_dyn_bh_section() {
 
 	uci_validate_section mapagent $section "${1}" \
 			'missing_bh_timer:range(1,255)'
-	uci_validate_section mapagent $section "${1}" \
-			'missing_bh_reconfig_timer:range(0,65535)'
 
 	[ "$?" -ne 0 ] && {
 		logger -s -t "mapagent" "Validation of dynamic backhaul section failed"
@@ -169,10 +211,6 @@ validate_agent_config() {
 	return 0
 }
 
-create_dir() {
-        mkdir -p /var/run/multiap
-}
-
 start_service() {
 	[ -f /usr/sbin/dynbhd ] && start_dynbhd_service
 
@@ -187,8 +225,11 @@ start_service() {
 	config_get_bool enabled agent enabled 1
 	[ "$enabled" -eq 0 ] && return 1
 
+	local ts
+	config_get_bool ts agent vlan_segregation 0
+	[ "$ts" -eq 1 ] && create_map #|| remove_map
+
 	procd_open_instance
-	create_dir
 	procd_set_param command "/usr/sbin/mapagent" "-d"
 	procd_set_param respawn
 #	procd_set_param stdout 1
@@ -196,6 +237,10 @@ start_service() {
 	procd_close_instance
 }
 
+#stop_service() {
+#	remove_map
+#}
+
 service_triggers()
 {
 	procd_add_reload_trigger "mapagent"

map-agent/files/etc/uci-defaults/991-map-agent-unset-pvid

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset_pvid() {
-	local section=$1
-
-	uci -q set mapagent.${section}.pvid="0"
-}
-
-config_load mapagent
-
-config_foreach unset_pvid policy

map-agent/files/lib/wifi/multiap

@@ -0,0 +1,849 @@
+#!/bin/sh
+
+# functions
+# wireless_teardown - tear down ifaces based on mapagent config
+# setup_network     - prepare /etc/config/network if necessary
+# setup_wireless    - prepare /etc/config/wireless based on mapagent config
+# write_credentials - write bBSS credentials to fBSS
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+. /lib/wifi/traffic_separation
+
+MAPFILE="/tmp/multiap.backhaul"
+
+diff=0
+onbrd_bssid=0
+onbrd_band=0
+
+usage() {
+	cat <<EOF
+Usage: $0 [wireless_teardown|setup_network|setup_wireless|write_credentials]
+Platform specific Multi-AP script to prepare network and wifi subsystem based on
+mapagent configuration.
+wireless_teardown - tear down ifaces in /etc/config/wireless
+setup_network     - prepare /etc/config/network
+setup_wireless    - prepare /etc/config/wireless
+write_credentials - write bBSS credentials to fBSS
+EOF
+	exit 1
+}
+
+
+type_to_multi_ap () {
+	type="$1"
+
+	if [ "$type" = "backhaul" ]; then
+		echo "1"
+		return
+	elif [ "$type" = "fronthaul" ]; then
+		echo "2"
+		return
+	elif [ "$type" = "combined" ]; then
+		echo "3"
+		return
+	fi
+
+	echo "0"
+}
+
+get_type_by_section() {
+	section="$1"
+
+	config_get type $section type "0"
+
+	echo "$(type_to_multi_ap $type)"
+}
+
+sync_credentials() {
+	bands=""
+	json_init
+	mapagent_process_fh() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		[ "$dev" != "$device" ] && return
+
+		config_get band $section band
+		config_get ssid $section ssid
+		config_get encryption $section encryption
+		config_get key $section key
+
+		section=$(uci add ieee1905 ap)
+		[ "$section" == "" ] && return
+
+		uci -q set ieee1905.${section}.band=$band
+		uci -q set ieee1905.${section}.ssid="$ssid"
+		uci -q set ieee1905.${section}.encryption=$encryption
+		uci -q set ieee1905.${section}.key="$key"
+		json_select "$band" > /dev/null
+		if [ "$?" = "0" ]; then
+			json_get_keys keys
+
+			for key in ${keys};
+			do
+				json_get_var val "$key"
+				uci -q set ieee1905.${section}.$key="$val"
+			done
+			json_select ..
+		fi
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+		config_get band $section band
+		config_get dedicated_backhaul $section dedicated_backhaul 0
+
+		[ "$dedicated_backhaul" != "0" ] && return
+
+		for b in $bands; do
+			if [ "$b" == "$band" ]; then
+				return
+			fi
+		done
+
+		config_foreach mapagent_process_fh ap $device
+		bands="$bands $band"
+	}
+
+	ieee1905_del_ap() {
+		append_value() {
+			local section=$1
+			local key=$2
+			shift
+			shift
+
+			while [ "$key" != "" ]; do
+				val=$(uci -q get ieee1905.$section.$key)
+				[ "$val" = "" ] && {
+					key=$1
+					shift
+					continue
+				}
+				json_add_string "$key" ${val}
+				key=$1
+				shift
+			done
+		}
+
+		local section=$1
+		local band
+
+		config_get band $section band
+		json_select "$band" > /dev/null
+		rc=$?
+		[ "$rc" != "0" ] && json_add_object "$band"
+		append_value $section "manufacturer" "model_name" "device_name" "model_number" "serial_number" "device_type" "os_version"
+		if [ "$rc" != "0" ]; then
+			json_close_object
+		else
+			json_select ..
+		fi
+
+		uci -q delete ieee1905.${section}
+	}
+
+	config_load ieee1905
+	config_foreach ieee1905_del_ap ap
+
+	config_load mapagent
+	config_foreach mapagent_process_radio radio
+
+	uci commit ieee1905
+	json_cleanup
+}
+
+write_credentials() {
+	config_load mapagent
+
+	mapagent_apply_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+			local bk_ssid="$3"
+			local bk_key="$4"
+
+			config_get ifname $section ifname
+
+			#echo found device=$device map=$multi_ap ifname=$ifname mapifname=$map_ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+			uci -q set wireless.${section}.multi_ap_backhaul_ssid="$bk_ssid"
+			uci -q set wireless.${section}.multi_ap_backhaul_key="$bk_key"
+		}
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface "$1" "$2" "$3"
+	}
+
+	mapagent_find_fbss() {
+		local section=$1
+		local dev=$2
+		local bk_ssid="$3"
+		local bk_key="$4"
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "2" ] && return
+
+		config_get ifname $section ifname
+
+		#echo applying bk_ssid = "$bk_ssid" bk_key = "$bk_key"
+
+		# subshell in hopes to maintain mapagent config loaded
+		echo $(mapagent_apply_wireless $ifname "$bk_ssid" "$bk_key") 2> /dev/null
+	}
+
+	mapagent_find_bbss() {
+		local section=$1
+		local dev=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get device $section device
+		config_get enabled $section enabled "1"
+
+		#echo found dev=$dev device=$device map=$multi_ap
+
+		[ "$enabled" == "0" ] && return
+		[ "$device" != "$dev" ] && return
+		[ "$multi_ap" != "1" ] && return
+
+		config_get ssid $1 ssid
+		config_get key $1 key
+
+		#echo found ssid="$ssid" key="$key"
+
+		config_foreach mapagent_find_fbss ap $dev "$ssid" "$key"
+	}
+
+	mapagent_process_radio() {
+		local section=$1
+
+		config_get device $section device
+
+		#echo found dev=$dev
+
+		config_foreach mapagent_find_bbss ap $device
+	}
+
+
+	config_foreach mapagent_process_radio radio
+
+	uci commit wireless
+}
+
+set_network() {
+	local ifname=$1
+	local num=$2
+	local bssid=$3
+
+	wpa_cli -i $ifname set_n $num bssid $bssid
+}
+
+bsta_steer() {
+	local ifname=$1
+	local bssid=$2
+
+	rc=$(wpa_cli -i $ifname set_n 0 bssid $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+
+	rc=$(wpa_cli -i $ifname roam $bssid)
+	[ "$rc" == "FAIL" ] && {
+		echo "1"
+		return;
+	}
+}
+
+write_bsta_config() {
+	local ifname=$1
+
+	#echo diff = $diff > /dev/console
+
+
+	config_load mapagent
+
+	mapagent_apply_wl_bsta() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+			local bssid=$3
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			#echo setting diff = $diff > /dev/console
+			old_bssid="$(uci -q get wireless.${section}.bssid)"
+
+			[ "$old_bssid" == "$bssid" ] && break
+
+			uci -q set wireless.${section}.bssid=$bssid
+			wpa_cli -i "$bsta" set_n 0 bssid $bssid
+			wpa_cli -i "$bsta" save_config
+			echo 1
+		}
+		config_load wireless
+
+		config_foreach apply_config wifi-iface $1 $2
+		uci commit wireless
+	}
+
+	mapagent_process_bk() {
+		local section=$1
+		local bsta=$2
+
+
+		config_get ifname $section ifname
+		#echo bsta = $bsta > /dev/console
+
+		[ "$bsta" == "$ifname" ] || return
+		#echo found ifname=$ifname > /dev/console
+
+		config_get bssid $section bssid
+		config_get band $section band
+		ret=$(mapagent_apply_wl_bsta $ifname $bssid)
+		[ "$ret" == "1" ] && {
+			diff=1
+			onbrd_bssid=$bssid
+			onbrd_band=$band
+		}
+	}
+
+	mapagent_apply_bssid_same_band() {
+		apply_config() {
+			local section=$1
+			local bsta=$2
+
+			config_get ifname $section ifname
+
+			[ "$bsta" == "$ifname" ] || return
+			uci -q set wireless.${section}.bssid=$bssid
+		}
+
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onbrd_band" != "$band" -o "$onboarded" = "1" ] && return
+
+		config_get ifname $1 ifname
+
+		config_load wireless
+		config_foreach apply_config wifi-iface $ifname $onbrd_bssid
+		uci commit wireless
+	}
+
+	config_foreach mapagent_process_bk bsta $ifname
+
+	#echo result diff = $diff > /dev/console
+	[ "$diff" == "1" ] && {
+		config_foreach mapagent_apply_bssid_same_band bsta
+		#ubus call uci commit '{"config":"wireless"}'
+		#echo reloading wireless > /dev/console
+	}
+
+}
+
+teardown_iface() {
+	config_load mapagent
+
+	local iface=$1
+
+	mapagent_teardown_wireless() {
+		write_wireless() {
+			local section=$1
+			local map_ifname=$2
+
+			config_get ifname $section ifname
+
+			[ "$ifname" != "$map_ifname" ] && return
+
+			uci -q set wireless.${section}.disabled="1"
+			uci -q set wireless.${section}.ssid="DISABLED-SSID"
+			uci -q set wireless.${section}.key="DISABLED-KEY"
+			uci -q delete wireless.${section}.multi_ap_backhaul_ssid
+			uci -q delete wireless.${section}.multi_ap_backhaul_key
+		}
+
+		config_load wireless
+
+		config_foreach write_wireless wifi-iface $1
+	}
+
+	mapagent_teardown_bss() {
+		local section=$1
+		local iface=$2
+
+		multi_ap=$(get_type_by_section $section)
+		[ "$multi_ap" == "0" ] && return
+
+		config_get ifname $section ifname
+
+		[ "$iface" != "$ifname" ] && return
+
+		config_get ifname $section ifname
+		uci -q set mapagent.${section}.enabled="0"
+		uci -q set mapagent.${section}.ssid="DISABLED-SSID"
+		uci -q set mapagent.${section}.key="DISABLED-KEY"
+
+		# subshell in hopes to maintain mapagent config loaded
+		$(mapagent_teardown_wireless $ifname)
+	}
+
+
+	config_foreach mapagent_teardown_bss ap $iface
+
+	uci commit wireless
+	uci commit mapagent
+}
+
+bsta_to_wireless() {
+	config_load mapagent
+
+	mapagent_find_lowest_prio_onboarded() {
+		mapagent_process_bk() {
+			config_get priority $1 priority "2"
+			config_get onboarded $1 onboarded "0"
+
+			[ "$onboarded" = "0" ] && return
+
+			if [ -z "$sec" -o "$prio" = "-1" -o "$priority" -lt "$prio" ]; then
+				sec=$1
+				prio=$priority
+			fi
+		}
+
+		local sec=""
+		local prio="-1"
+
+		config_foreach mapagent_process_bk bsta
+		echo $sec
+	}
+
+	mapagent_enable_best() {
+		#echo 1=$1 best=$best > /dev/console
+		if [ "$1" = "$best" ]; then
+			uci -q set mapagent.$1.enabled='1'
+		else
+			uci -q set mapagent.$1.enabled='0'
+		fi
+	}
+
+	mapagent_bsta_to_wireless() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section=$1
+				local bsta=$2
+				local ssid="$3"
+				local key="$4"
+				local encryption=$5
+				local enabled=$6
+				local bssid=$7
+				local disabled="0"
+
+				config_get ifname $section ifname
+
+				[ -z "$enabled" -o "$enabled" = "0" ] && disabled="1"
+
+				[ "$bsta" == "$ifname" ] || return
+
+				uci -q set wireless.${section}.ssid="$ssid"
+				uci -q set wireless.${section}.key="$key"
+				uci -q set wireless.${section}.encryption=$encryption
+				uci -q set wireless.${section}.bssid="$bssid"
+				uci -q set wireless.${section}.default_disabled='0'
+
+				[ "$disabled" != "1" ] && return
+				wpa_cli -i "$bsta" disconnect > /dev/null 2>&1
+				wpa_cli -i "$bsta" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$bsta" save_config > /dev/null 2>&1
+
+				echo 1
+			}
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $@
+			uci commit wireless
+		}
+
+		mapagent_find_other_creds() {
+			#echo "trying to find other creds for $2" > /dev/console
+			config_get band $1 band
+			config_get onboarded $1 onboarded "0"
+
+			[ "$3" != "$band" -o "$onboarded" = "0" ] && return
+
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get enabled $1 enabled "0"
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $2 "$ssid" "$key" $encryption $4 "$bssid")
+		}
+
+		config_get band $1 band
+		config_get ifname $1 ifname
+		config_get onboarded $1 onboarded "0"
+		config_get enabled $1 enabled "0"
+
+		if [ "$onboarded" = "0" ]; then
+			config_foreach mapagent_find_other_creds bsta $ifname $band $enabled
+		else
+			config_get ssid $1 ssid
+			config_get key $1 key
+			config_get encryption $1 encryption
+			config_get bssid $1 bssid
+
+			echo $(mapagent_apply_wl_bsta $ifname "$ssid" "$key" $encryption $enabled "$bssid")
+		fi
+	}
+
+#	best=$(mapagent_find_lowest_prio_onboarded)
+#
+#	[ -z "$best" ] && return
+#
+#	band=$1
+#	sec=""
+#	prio=""
+#
+#	config_foreach mapagent_enable_best bsta $best
+#	uci commit mapagent
+	config_load mapagent
+
+	diff=$(config_foreach mapagent_bsta_to_wireless bsta)
+
+#	[ "$diff" != "" ] && {
+
+		ubus call uci commit '{"config":"wireless"}'
+#	}
+}
+
+
+sync_mapcontroller_from_wireless() {
+	ubus -t 5 wait_for wifi
+	[ "$?" != "0" ] && return
+
+	[ ! -f "/etc/config/wireless" ] && return
+
+	status=$(ubus -S call wifi status)
+
+	device_to_band() {
+		local ifname=$1
+		json_load "$status"
+		json_select "radios"
+		json_get_keys keys
+
+		for key in $keys; do
+			json_select $key
+			json_get_var name name
+
+			if [ "$name" != "$ifname" ]; then
+				json_select ..
+				continue
+			fi
+
+			json_get_var band band
+
+			if [ "$band" == "5GHz" ]; then
+				echo "5"
+			elif [ "$band" == "2.4GHz" ]; then
+				echo "2"
+			fi
+
+			break
+		done
+
+		json_cleanup
+	}
+
+	wireless_process_iface() {
+		local section=$1
+		local type="ap"
+		local enabled="1"
+
+		config_get multi_ap $section multi_ap 0
+		[ "$multi_ap" != "1" ] && [ "$multi_ap" != "2" ] && return
+
+		config_get mode $section mode "ap"
+		[ "$mode" != "ap" ] && return
+
+		config_get device $section device
+		band=$(device_to_band $device)
+		[ "$band" == "" ] && return
+
+		config_get ssid $section ssid
+		config_get key $section key
+		config_get encryption $section encryption
+		config_get start_disabled $section start_disabled "0"
+		config_get network $section network
+
+
+		cntlr_section=$(uci add mapcontroller ${type})
+		uci -q set mapcontroller.${cntlr_section}.ssid="$ssid"
+		uci -q set mapcontroller.${cntlr_section}.key="$key"
+		uci -q set mapcontroller.${cntlr_section}.encryption="$encryption"
+		uci -q set mapcontroller.${cntlr_section}.band="$band"
+		uci -q set mapcontroller.${cntlr_section}.vid="1"
+		uci -q set mapcontroller.${cntlr_section}.network="$network"
+
+		[ "$multi_ap" == "1" ] && map_type="backhaul" || map_type="fronthaul"
+		uci -q set mapcontroller.${cntlr_section}.type="$map_type"
+
+		[ "$start_disabled" == "1" ] && enabled="0"
+		uci -q set mapcontroller.${cntlr_section}.enabled="$enabled"
+	}
+
+	mapcontroller_teardown() {
+		local section=$1
+
+		uci delete mapcontroller.$1
+	}
+
+	config_load mapcontroller
+	config_foreach mapcontroller_teardown ap
+
+	config_load wireless
+	config_foreach wireless_process_iface wifi-iface
+	uci commit mapcontroller
+}
+
+bsta_scan_on_enabled() {
+	local onboarded_bands=""
+
+	mapagent_onboarded_bands() {
+		config_get band $1 band
+		config_get onboarded $1 onboarded "0"
+
+		[ "$onboarded" = "0" ] && return
+
+		onboarded_bands="$onboarded_bands $band"
+	}
+
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname
+		config_get band $1 band
+		config_get enabled $1 enabled
+
+		[ "$enabled" = "0" ] && return
+
+		for onboarded_band in $onboarded_bands
+		do
+			[ "$onboarded_band" != "$band" ] && continue
+
+			logger -t multiap "bsta_scan_on_enabled $ifname $band"
+			wpa_cli -i "$ifname" enable_network 0 > /dev/null 2>&1
+			wpa_cli -i "$ifname" reconnect > /dev/null 2>&1
+			wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+		done
+	}
+
+	config_load mapagent
+	config_foreach mapagent_onboarded_bands bsta
+	config_foreach mapagent_enable_bk bsta
+}
+
+bsta_enable_all() {
+	mapagent_enable_bk() {
+		config_get ifname $1 ifname "2"
+		uci -q set mapagent.$1.enabled="1"
+	}
+
+	config_load mapagent
+
+	config_foreach mapagent_enable_bk bsta
+	uci commit mapagent
+	bsta_scan_on_enabled
+}
+
+bsta_disable_lower_priority() {
+	config_load mapagent
+
+	mapagent_get_priority() {
+		config_get ifname $1 ifname
+
+		[ "$ifname" != "$2" ] && return
+
+		config_get priority $1 priority "2"
+
+		echo "$priority"
+	}
+
+	mapagent_disable_lower_bk() {
+		mapagent_apply_wl_bsta() {
+			apply_config() {
+				local section="$1"
+				local bsta="$2"
+				local enabled="$3"
+
+				config_get ifname $section ifname
+
+				[ "$bsta" == "$ifname" ] || return
+
+				[ "$enabled" != "0" ] && return
+
+				wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+				wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+				wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+			}
+			local ifname="$1"
+			local enabled="$2"
+
+			[ "$enabled" != "0" ] && return
+
+			config_load wireless
+
+			config_foreach apply_config wifi-iface $ifname $enabled
+		}
+
+		local enabled="1"
+
+		config_get ifname $1 ifname
+		config_get priority $1 priority
+
+		[ "$ifname" != "$2" -a "$priority" -gt "$3" ] && enabled="0"
+
+		uci -q set mapagent.$1.enabled="$enabled"
+
+		echo $(mapagent_apply_wl_bsta $ifname $enabled) > /dev/null
+	}
+
+	local bsta=$1
+
+	prio=$(config_foreach mapagent_get_priority bsta $bsta)
+	#echo bsta $bsta has prio $prio > /dev/console
+
+	config_foreach mapagent_disable_lower_bk bsta $bsta $prio
+	uci commit mapagent
+
+#	ubus call uci commit '{"config":"wireless"}'
+}
+
+
+bsta_use_link() {
+	config_load mapagent
+
+	mapagent_disable_bk() {
+		local bsta="$2"
+
+		config_get ifname $1 ifname
+		config_get enabled $1 enabled
+
+		[ "$bsta" = "$ifname" ] && return
+
+		wpa_cli -i "$ifname" disconnect > /dev/null 2>&1
+		wpa_cli -i "$ifname" disable_network 0 > /dev/null 2>&1
+		wpa_cli -i "$ifname" save_config > /dev/null 2>&1
+	}
+
+	local bsta=$1
+
+	config_foreach mapagent_disable_bk bsta $bsta
+}
+
+bsta_swap_to_link() {
+	bsta_disable_lower_priority $1
+	bsta_use_link $1
+
+	wpa_cli -i "$1" enable_network 0 > /dev/null
+	wpa_cli -i "$1" reconnect > /dev/null
+	wpa_cli -i "$1" save_config > /dev/null
+}
+
+set_uplink_backhaul_info() {
+	local ul_1905id=$1
+	local ul_mac=$2
+
+	json_load "$(cat $MAPFILE)"
+	json_add_string "backhaul_device_id" "$ul_1905id"
+	json_add_string "backhaul_macddr" "$ul_mac"
+	json_dump > "$MAPFILE"
+	json_cleanup
+}
+
+set_uplink() {
+	local type=$1
+	local ifname=$2
+	local hwaddr
+
+	hwaddr="$(ifconfig $ifname | grep -i hwaddr | awk '{print $5}' | awk '{print tolower($0)}')"
+
+	json_init
+	json_add_string "type" "$type"
+	json_add_string "ifname" "$ifname"
+	json_add_string "macaddr" "$hwaddr"
+	json_dump > "$MAPFILE"
+	json_cleanup
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":true, "prevent_island":true, "ifname":"all"}'
+	fi
+
+}
+
+unset_uplink() {
+	local type=${1:-wifi}
+
+	config_load mapagent
+
+	island_prevention="$(uci -q get mapagent.agent.island_prevention)"
+
+	if [ "$island_prevention" = "1" -a "$type" = "eth" ]; then
+		ubus call map.agent toggle_fh '{"enable":false, "prevent_island":true, "ifname":"all"}'
+	fi
+
+	rm -f "$MAPFILE" > /dev/null 2>&1
+}
+
+func=$1
+shift
+
+case "$func" in
+	wireless_teardown) wireless_teardown;;
+	setup_network) setup_network;;
+	setup_wireless) setup_wireless;;
+	write_credentials) write_credentials;;
+	sync_credentials) sync_credentials;;
+	bsta_steer) bsta_steer $@;;
+	set_network) set_network $@;;
+	write_bsta_config) write_bsta_config $@;;
+	teardown_iface) teardown_iface $@;;
+	bsta_to_wireless) bsta_to_wireless $@;;
+	sync_mapcontroller_from_wireless) sync_mapcontroller_from_wireless $@;;
+	ts) ts_sub $@;;
+	bsta_enable_all) bsta_enable_all $@;;
+	bsta_disable_lower_priority) bsta_disable_lower_priority $@;;
+	bsta_scan_on_enabled) bsta_scan_on_enabled $@;;
+	bsta_use_link) bsta_use_link $@;;
+	bsta_swap_to_link) bsta_swap_to_link $@;;
+	set_uplink) set_uplink $@;;
+	set_uplink_backhaul_info) set_uplink_backhaul_info $@;;
+	unset_uplink) unset_uplink $@;;
+	--help|help) usage;;
+	*) usage; exit 1;;
+esac
+

map-agent/files/lib/wifi/traffic_separation

@@ -0,0 +1,511 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+### Traffic Separation ###
+
+dbg() {
+	logger -t traffic_separation $@
+}
+
+ts_sub() {
+
+	ts_usage() {
+		cat <<EOF
+Usage: $0 [create|delete|populate|primary|reload]
+Traffic Separation related functions.
+create fh <iface> <vid>			- create vlan device and rules for wifi fronthaul
+create bh <iface> <vid> <profile>	- create vlan device and rules for wifi backhaul
+create eth <iface> <vid> <pbits>	- create vlan device and rules for logical ethernet interface
+delete <iface>				- delete vlan device
+populate eth <iface> <vid>		- add secondary network rules for logical ethernet interface
+primary get <iface>			- read primary VID for interface from driver (from Association Response frame IE)
+reload     				- reload network with new configuration
+EOF
+	exit 1
+	}
+
+	_get_bridge() {
+		local bridge=$(ip link show $1 | grep -o "master [^\s]*" | cut -d ' ' -f 2)
+		echo $bridge
+	}
+
+	set_wireless_bridge() {
+		config_load wireless
+
+		_set_network() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+			[ "$iface" != "$ifname" ] && continue
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "sta" -a "$multi_ap" = "1" ] && continue
+
+			config_get network $sec network
+			local new_network=${bridge##br-}
+			if [ "$new_network" != "$network" ] ; then
+				uci -q set wireless.${sec}.network=${new_network}
+				uci commit wireless
+			fi
+
+			brctl addif $bridge $iface &> /dev/null
+		}
+
+		config_foreach _set_network wifi-iface ${1} ${2}
+	}
+
+	ts_create() {
+
+		_create_vlan_dev() {
+			iface=$1				# real iface
+			vid=$2					# Vlan ID
+			bridge=$3				# bridge iface should be connected
+			vlan_dev=$4
+
+			old_bridge="$(_get_bridge $iface)"	# bridge iface is connected to
+
+			# remove interface from bridge if it is in one
+			[ -n "$old_bridge" ] && brctl delif $old_bridge $iface &> /dev/null
+
+			# (re)create vlan device
+			ip link show $vlan_dev && vlanctl --if-delete $vlan_dev
+			vlanctl --mcast --if-create-name $iface $vlan_dev --if $iface --set-if-mode-rg
+
+			vlanctl --if $iface --tx --tags 0 --default-miss-drop
+			vlanctl --if $iface --tx --tags 1 --default-miss-drop
+			vlanctl --if $iface --tx --tags 2 --default-miss-drop
+			vlanctl --if $iface --rx --tags 0 --default-miss-drop
+			vlanctl --if $iface --rx --tags 1 --default-miss-drop
+			vlanctl --if $iface --rx --tags 2 --default-miss-drop
+
+			# bring the vlan device up and add back to bridge if it was in one
+			brctl addif $bridge $vlan_dev &> /dev/null
+		}
+
+		ts_create_fh() {
+			iface=$1				# fh iface
+			vid=$2					# SSID specific (secondary) or primary vid
+			bridge=$3
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ]  || {
+				cat <<EOF
+Adding FH device requires IFACE, VID and bridge
+EOF
+				exit 1
+			}
+
+			# create vlan device
+			#set_wireless_bridge $iface $bridge
+
+			vlan_dev=${iface}_vlan${vid}
+			ip link set $vlan_dev down
+			_create_vlan_dev $iface $vid $bridge $vlan_dev
+
+			# add rules
+#			vlanctl --if $iface --rx --tags 0 --filter-ethertype 0x886c --set-rxif $vlan_dev --rule-append		# incoming brcm
+
+			# EAPOL frames
+			vlanctl --if $iface --rx --tags 0 --filter-ethertype 34958 --set-rxif $vlan_dev --rule-append
+			vlanctl --if $iface --rx --tags 1 --filter-ethertype 34958 --pop-tag --set-rxif $vlan_dev --rule-append
+			vlanctl --if $iface --tx --tags 0 --filter-txif $vlan_dev --filter-ethertype 34958 --rule-append
+
+			# 8021q vlan id TAG/UNTAG
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-txif $vlan_dev --filter-vid $vid 0 --pop-tag --dscp2pbits 0 --rule-append
+
+			ip link set $iface up
+			ip link set $vlan_dev up
+		}
+
+		ts_create_bh() {
+			iface=$1				# bh iface
+			vid=$2					# primary vid
+			profile=$3				# agent profile (1 or 2)
+			bridge=$4				# bridge interface should be connected to
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$profile" ] || {
+				cat <<EOF
+Adding BH device requires IFACE, VID and PROFILE (1 or 2).
+EOF
+				exit 1
+			}
+
+			#[ -n "$bridge" ] && set_wireless_bridge $iface $bridge
+
+			old_vid=$(wl -i $1 map_8021q_settings)
+			old_vid=${old_vid##* }
+			old_profile=$(wl -i $1 map_profile | cut -d ' ' -f 3)
+
+			[ "$old_vid" = "$vid" -a "$old_profile" = "$profile" ] && return
+
+			wl vlan_mode 0 &> /dev/null				# make sure this is OFF, else driver won't handle vlan
+			wl -i $iface down &> /dev/null
+			wl -i $iface map_profile $profile &> /dev/null		# only has effect on profile 2
+			wl -i $iface map_8021q_settings $vid &> /dev/null	# can only be set on bBSS (read-only on bSTA)
+			wl -i $iface up &> /dev/null
+		}
+
+		ts_create_lei() {
+			vid=$1					# primary vid
+			pbits=$2				# default pbits to apply
+			vlan_bridge=$3				# name of ts subsystem bridge
+			lan_bridge=$4				# name of node local bridge
+
+			[ -n "$vid" ] && [ -n "$pbits" ] && [ -n "$vlan_bridge" ] && [ -n "$lan_bridge" ] || {
+				cat <<EOF
+Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
+EOF
+				exit 1
+			}
+
+			ip link show lei &> /dev/null || {
+				ip link add link lei name lei_lan type vlan id 1 2>/dev/null
+			}
+
+			old_vid=$(ip -d link show lei_lan | sed -n 's/vlan.*id \([0-9][0-9]*\) .*/\1/p')
+
+			[ "$old_vid" != "$vid" ] && {
+				ip link del lei_lan
+				ip link add link lei name lei_lan type vlan id ${vid}
+			}
+
+			brctl addif ${lan_bridge} lei_lan &>/dev/null
+			brctl addif ${vlan_bridge} lei_map &>/dev/null
+
+			ip link set lei up
+			ip link set lei_map up
+			ip link set lei_lan up
+		}
+
+		_create_eth() {
+			iface=$1				# Multi-AP Logical Ethernet Interface
+			vid=$2					# primary vid
+			bridge=$3				# name of ts subsystem bridge
+			pbits=0
+
+			[ -n "$iface" ] && [ -n "$vid" ] && [ -n "$bridge" ] || {
+				cat <<EOF
+Adding ETH device requires IFACE, VID, PBITS and name of vlan and lan bridges.
+EOF
+				exit 1
+			}
+
+			dbg create $@
+
+			ip link set $iface down
+
+			vlan_dev=${iface}_vlan${vid}
+			ip link set $vlan_dev down
+			_create_vlan_dev $iface $vid $bridge $vlan_dev
+
+			vlanctl --if $iface --rx --tags 0 --set-rxif $vlan_dev --push-tag --set-vid $vid 0 --set-pbits $pbits 0 --rule-append
+			vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --pop-tag --rule-append
+
+			[ $# -le 3 ] && exit 0
+			shift 3
+
+			while [ -n "$1" ] ; do
+				vid=$1
+				vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append
+				vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append
+				shift
+			done
+
+			ip link set $iface up
+			ip link set $vlan_dev up
+		}
+
+		ts_create_eths() {
+			pvid=$1					# primary vid
+			bridge=$2				# name of ts subsystem bridge
+
+			shift 2
+			# TODO use ieee1905 bridge
+			for iface in $(uci get network.br_lan.ports) ; do
+				[ "$iface" = "lei_lan" ] && continue
+				_create_eth $iface $pvid $bridge $@
+				ubus call ieee1905 del_interface "{\"ifname\":\"$iface\"}"
+			done
+		}
+
+		ts_create_dhcp() {
+			local diff=""
+
+                        _net_setup() {
+				local name=$1
+				local devname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="$devname"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					# TODO vid > 255
+					local ip_addr="192.168.${vid}.1"
+					[ "${vid}" = "1" ] && ip_addr="192.168.${vid}.2"
+					uci -q set network.${name}.ipaddr="${ip_addr}"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_br_setup() {
+				local name=$1
+				local sinkname=$2
+				local vid=$3
+
+				[ -z "$(uci -q get network.${name}_dev)" ] && {
+					uci -q set network.${name}_dev="device"
+					uci -q set network.${name}_dev.name="br-${name}"
+					uci -q set network.${name}_dev.type="bridge"
+					uci -q set network.${name}_dev.bridge_empty="1"
+					uci -q add_list network.${name}_dev.ports="${sinkname}"
+
+					diff="1"
+				}
+
+				[ -z "$(uci -q get network.${name})" ] && {
+					uci -q set network.${name}="interface"
+					uci -q set network.${name}.device="br-${name}"
+					uci -q set network.${name}.is_lan="1"
+					uci -q set network.${name}.proto="static"
+					uci -q set network.${name}.ipaddr="192.168.${vid}.1"
+					uci -q set network.${name}.netmask="255.255.255.0"
+
+					diff="1"
+				}
+
+				[ "$diff" = "1" ] && uci -q commit network
+			}
+
+			_dhcp_setup() {
+				local name=$1
+
+				[ -n "$(uci -q get dhcp.${name})" ] && return
+
+				uci -q set dhcp.${name}=dhcp
+				uci -q set dhcp.${name}.interface="${name}"
+				uci -q set dhcp.${name}.start="100"
+				uci -q set dhcp.${name}.limit="150"
+				uci -q set dhcp.${name}.leasetime="1h"
+				uci -q set dhcp.${name}.dhcpv4="server"
+				uci -q set dhcp.${name}.dhcpv6="server"
+				uci -q set dhcp.${name}.ra="server"
+				uci -q set dhcp.${name}.ra_slaac="1"
+				uci -q add_list dhcp.${name}.ra_flags="managed-config"
+				uci -q add_list dhcp.${name}.ra_flags="other-config"
+
+				diff="1"
+				uci -q commit dhcp
+			}
+
+			_firewall_setup() {
+				local name=$1
+				local network=$2
+				local zone_exist=0
+
+				config_load firewall
+
+				_process_zone() {
+					local section=$1
+					local new_name=$2
+					local name
+
+					config_get name $section name
+
+					[ "$name" == "$new_name" ] && zone_exist=1
+				}
+
+				config_foreach _process_zone zone $name
+
+				[ "$zone_exist" != "0" ] && return
+
+				uci -q add firewall zone
+				uci -q set firewall.@zone[-1].name="$name"
+				uci -q add_list firewall.@zone[-1].network="$network"
+				uci -q set firewall.@zone[-1].input='ACCEPT'
+				uci -q set firewall.@zone[-1].output='ACCEPT'
+				uci -q set firewall.@zone[-1].forward='ACCEPT'
+
+				uci -q add firewall forwarding
+				uci -q set firewall.@forwarding[-1].src="$name"
+				uci -q set firewall.@forwarding[-1].dest="wan"
+
+				diff="1"
+				uci -q commit firewall
+			}
+
+			vid=$1					# primary vid
+
+			[ -n "$vid" ] || {
+				cat <<EOF
+VID required to configure DHCP.
+EOF
+				exit 1
+			}
+
+			ip link show sink${vid} || {
+				ip link add sink${vid} type veth peer name sink${vid}_vlan
+				ip link add link sink${vid} name sink${vid}_peer type vlan id ${vid}
+			}
+
+			ip link set sink${vid} up
+			ip link set sink${vid}_peer up
+			ip link set sink${vid}_vlan up
+
+			diff=""
+			_net_setup sink${vid} sink${vid}_peer ${vid}
+			_dhcp_setup sink${vid}
+			_firewall_setup lan${vid} sink${vid}
+
+			[ "$diff" = "1" ] && {
+				ubus call network reload
+				ubus -t 5 wait_for network.interface.sink${vid}
+			}
+
+			brctl addif br-map sink${vid}_vlan &> /dev/null
+		}
+
+	local type=$1
+	shift
+
+	case "$type" in
+		fh) ts_create_fh $@;;
+		bh) ts_create_bh $@;;
+		lei) ts_create_lei $@;;
+		eths) ts_create_eths $@;;
+		dhcp) ts_create_dhcp $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+	}
+
+	ts_delete() {
+		iface=$1
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 0
+
+		vlan_dev=${path##*upper_}
+		bridge="$(_get_bridge $vlan_dev)"
+
+		[ -n "$bridge" ] && {
+			vlanctl --if-delete $vlan_dev		# note: also removes rules and removes from bridge
+			brctl addif $bridge $iface &> /dev/null # needed to add again
+                }
+
+	}
+
+	ts_populate() {
+		local type=$1
+		shift
+
+		[ "$type" == "eth" ] || {
+			cat <<EOF
+Populating ETH rules requires IFACE and VID.
+EOF
+			exit 1
+		}
+
+		iface=$1				# Multi-AP Logical Ethernet Interface
+		vid=$2					# secondary vid
+
+		path=$(ls -d /sys/class/net/${iface}/upper_*)
+		[ -z "$path" ] && exit 1
+		vlan_dev=${path##*upper_}
+
+		# add rules
+		#vlanctl --if $iface --rx --tags 1 --filter-vid $vid 0 --set-rxif $vlan_dev --rule-append		# note: retain secondary vids
+		#vlanctl --if $iface --tx --tags 1 --filter-vid $vid 0 --filter-txif $vlan_dev --rule-append		# note: already default
+	}
+
+	ts_primary() {
+		local func=$1
+		shift
+
+		case "$func" in
+			get) vid=$(wl -i $1 map_8021q_settings); echo ${vid##* };;
+			*) ts_usage; exit 1;;
+		esac
+	}
+
+	ts_unicast() {
+		local mac=$1
+		local iface=$2
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "$mac" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d "$mac" -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d "$mac" -p 0x893a -j DROP
+	}
+
+	ts_multicast() {
+		local iface=$1
+
+		# TODO: improve?
+		res=$(ebtables -t broute -L | grep -i "1:80:C2:00:00:13" | grep "$iface")
+		[ -n "$res" ] && return
+
+		ebtables -t broute -D BROUTING -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -D BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+		ebtables -t broute -I BROUTING -i "$iface" -d 01:80:C2:00:00:13 -p 0x893a -j DROP
+	}
+
+	ts_reload() {
+		local dhcp_reload=$1
+
+		# workaround for missing backhaul wifi.ap.* ubus obj's:
+		# iterate in config and setup bh
+		config_load wireless
+
+		_setup_bh_iface() {
+			local sec=$1
+			local iface=$2
+			local bridge=$3
+
+			config_get ifname $sec ifname
+
+			config_get mode $sec mode
+			config_get multi_ap $sec multi_ap "0"
+			[ "$mode" = "ap" -a "$multi_ap" = "1" ] && {
+				ts_create bh $ifname 1 2 br-map
+			}
+		}
+
+		config_foreach _setup_bh_iface wifi-iface
+
+		[ -n "dhcp_reload" ] && /etc/init.d/dnsmasq reload
+
+		# another workaround for netif? removed
+		# sink devices for br-map bridge
+		for sink in $(ubus list network.interface.sink*) ; do
+			local sink_vlan=${sink/network.interface./}_vlan
+			brctl addif br-map $sink_vlan &> /dev/null
+		done
+	}
+
+	local func=$1
+	shift
+
+	case "$func" in
+		create) dbg "create $@"; ts_create $@;;
+		delete) dbg "delete $@"; ts_delete $@;;
+		populate) dbg "populate $@"; ts_populate $@;;
+		primary) dbg "primary $@"; ts_primary $@;;
+		unicast) dbg "unicast $@"; ts_unicast $@;;
+		multicast) dbg "multicast $@"; ts_multicast $@;;
+		reload) dbg "reload $@"; ts_reload $@;;
+		--help|help) ts_usage;;
+		*) ts_usage; exit 1;;
+	esac
+}

map-controller/Config.in

@@ -6,25 +6,5 @@ config CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 	bool "Support Dynamic Controller configuration sync"
 	default y if MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
 
-config CONTROLLER_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config CONTROLLER_EASYMESH_VERSION
-	int "Support Easymesh version"
-	default 2
-
-config CONTROLLER_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default CONTROLLER_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through CONTROLLER_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
 endmenu
 endif

map-controller/Makefile

@@ -1,13 +1,16 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 IOPSYS Software Solutions AB
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=map-controller
-PKG_VERSION:=2.11.0.20
+PKG_VERSION:=6.0.21
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=5ff7f037c040d337982a1e3a51693fb8e0682046
+PKG_SOURCE_VERSION:=a388472887744d404825ee5602ab906bf1fc225c
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -17,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-controller
@@ -38,31 +38,21 @@ define Package/map-controller/config
 endef
 
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
 MAKE_PATH:=src
 
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_CONTROLLER_EASYMESH_VERSION)
-
 ifeq ($(CONFIG_CONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG),y)
 TARGET_CFLAGS += -DCONTROLLER_SYNC_DYNAMIC_CNTLR_CONFIG
 endif
 
-ifeq ($(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_CONTROLLER_EASYMESH_VENDOR_EXT_OUI)\\\"
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT
-endif
-
 define Package/map-controller/install
 	$(INSTALL_DIR) $(1)/etc
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/mapcontroller $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/lib/mapcontroller
-	$(CP) $(PKG_BUILD_DIR)/src/plugins/steer/rcpi/rcpi.so $(1)/usr/lib/mapcontroller/rcpi.so
 endef
 
 ifeq ($(LOCAL_DEV),1)

map-controller/files/etc/config/mapcontroller

@@ -2,22 +2,14 @@ config controller 'controller'
 	option enabled '1'
 	option registrar '2 5'
 	option debug '0'
-	option bcn_metrics_max_num '10'
-	option initial_channel_scan '0'
-	option primary_vid '0'
-	option primary_pcp '0'
-	option allow_bgdfs '0'
-	option channel_plan '0'
-
-config sta_steering
-	option steer_module 'rcpi'
-	option enabled '1'
 	option enable_sta_steer '0'
 	option enable_bsta_steer '0'
 	option use_bcn_metrics '0'
 	option use_usta_metrics '0'
-	option bandsteer '0'
-	option diffsnr '8'
+	option primary_vid '1'
+	option primary_pcp '0'
+	option allow_bgdfs '0'
+	option channel_plan '0'
 
 config ap
 	option band '2'
@@ -68,8 +60,8 @@ config ap
 #	option report_sta_assocfails_rate '0'
 #	option report_metric_periodic '0'
 #	option report_scan '0'
-#	list steer_exclude 'e0:d4:e8:79:c4:ee'
-#	list steer_exclude_btm 'e0:d4:e8:79:c4:11'
+#	option steer_exclude '0'
+#	option steer_exclude_btm '0'
 #	option steer_disallow '0'
 #	option coordinated_cac '0'
 #	option traffic_separation '0'
@@ -115,8 +107,8 @@ config ap
 #	option report_sta_assocfails_rate '0'
 #	option report_metric_periodic '0'
 #	option report_scan '0'
-#	list steer_exclude 'e0:d4:e8:79:c4:ee'
-#	list steer_exclude_btm 'e0:d4:e8:79:c4:11'
+#	option steer_exclude '0'
+#	option steer_exclude_btm '0'
 #	option steer_disallow '0'
 #	option coordinated_cac '0'
 #	option traffic_separation '0'

map-controller/files/etc/init.d/mapcontroller

@@ -19,36 +19,14 @@ validate_controller_section() {
 		'enabled:bool:true' \
 		'registrar:string' \
 		'debug:range(0,16)' \
-		'bcn_metrics_max_num:range(1,256)' \
-		'initial_channel_scan:bool:true' \
 		'resend_num:uinteger:0' \
-		'allow_bgdfs:range(0,2629744)' \
-		'channel_plan:range(0,2629744)' \
-		'enable_ts:bool:false'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of controller section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_sta_steering_section() {
-	local section="$1"
-
-	uci_validate_section mapcontroller $section "${1}" \
-		'steer_module:string' \
-		'enabled:bool:true' \
 		'enable_sta_steer:bool:false' \
 		'enable_bsta_steer:bool:false' \
 		'use_bcn_metrics:bool:false' \
-		'use_usta_metrics:bool:false' \
-		'bandsteer:bool:false' \
-		'diffsnr:range(0,100)'
+		'use_usta_metrics:bool:false'
 
 	[ "$?" -ne 0 ] && {
-		logger -s -t "mapcontroller" "Validation of sta_steering section failed"
+		logger -s -t "mapcontroller" "Validation of controller section failed"
 		IS_CFG_VALID=0
 		return 1
 	}
@@ -59,7 +37,7 @@ validate_ap_section() {
 	local section="$1"
 
 	uci_validate_section mapcontroller $section "${1}" \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'ssid:string' \
 			'encryption:or("sae", "sae+aes", "psk2",
 				"psk2+aes", "sae-mixed", "sae-mixed+aes")' \
@@ -112,7 +90,7 @@ validate_radio_section() {
 	uci_validate_section mapcontroller $section "${1}" \
 			'agent_id:macaddr' \
 			'macaddr:macaddr' \
-			'band:or("2", "5", "6")' \
+			'band:or("2", "5")' \
 			'steer_policy:range(0,2)' \
 			'util_threshold:range(0,255)' \
 			'rcpi_threshold:range(0,255)' \
@@ -135,7 +113,6 @@ validate_controller_config() {
 	IS_CFG_VALID=1
 
 	validate_controller_section &&
-		config_foreach validate_sta_steering_section sta_steering &&
 		config_foreach validate_ap_section ap &&
 		config_foreach validate_node_section node &&
 		config_foreach validate_radio_section radio

map-topology/Config.in

@@ -1,22 +0,0 @@
-if (PACKAGE_map-topology)
-
-menu "Configurations"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT
-	bool "Enable extra features through Easymesh vendor extension"
-	default y
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	string
-	default "\\\\x11\\\\x22\\\\x33"
-
-config TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI
-	string "Vendor OUI in '\\\\xAB\\\\xCD\\\\xEF' format"
-	default TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI_DEFAULT
-	help
-	Extra features not covered by the base Easymesh specification can be
-	enabled through TOPOLOGYD_EASYMESH_VENDOR_EXT. Please provide the Vendor's OUI
-	through which such features would be exposed.
-
-endmenu
-endif

map-topology/Makefile

@@ -1,45 +1,38 @@
 #
-# Copyright (C) 2020-22 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys
 #
 
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=map-topology
-PKG_VERSION:=2.5.1.13
+PKG_VERSION:=4.0.1
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_VERSION:=aaa55a72e719184af32d57a9b40bec1c440774a9
+PKG_SOURCE_VERSION:=f0c36d13b19c100639a8f657a6a027bbfd74b802
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/map-topology.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DEPENDS:=ieee1905
-
-PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE:=PROPRIETARY IOPSYS
 PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/map-topology
 	CATEGORY:=Utilities
 	DEPENDS:=+libubox +ubus +libpthread +libuci +libeasy \
-		 +libavahi-nodbus-support +libnetfilter-conntrack +libnfnetlink +libmnl
+		 +libavahi-nodbus-support +ieee1905
 	TITLE:=Utility to build topology of a multi-AP network
 endef
 
-define Package/map-topology/config
-	source "$(SOURCE)/Config.in"
-endef
-
 TARGET_CFLAGS += \
-	-Wno-error=deprecated-declarations \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/libnetfilter_conntrack \
 	-D_GNU_SOURCE
 
 define Package/map-topology/description
@@ -48,11 +41,6 @@ endef
 
 MAKE_PATH:=src
 
-ifeq ($(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT),y)
-TARGET_CFLAGS += -DEASYMESH_VENDOR_EXT_OUI=\\\"$(CONFIG_TOPOLOGYD_EASYMESH_VENDOR_EXT_OUI)\\\"
-endif
-
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/map-topology/* $(PKG_BUILD_DIR)/

map-topology/files/etc/config/hosts

@@ -2,4 +2,3 @@
 config global 'global'
 	option ageing_timer '1440'
 	option reboot_persistent '0'
-	list ifname 'br-lan'

mosquitto-auth-shadow/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mosquitto-auth-shadow
-PKG_VERSION:=1.0.0
-
-PKG_MAINTAINER:=Erik Karlsson <erik.karlsson@genexis.eu>
-PKG_LICENSE:=EPL-2.0
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mosquitto-auth-shadow
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=mosquitto - /etc/shadow authentication plugin
-  DEPENDS:=mosquitto
-  USERID:=mosquitto=200:mosquitto=200 mosquitto=200:shadow=11
-endef
-
-define Package/mosquitto-auth-shadow/description
-  Plugin for the mosquitto MQTT message broker that authenticates
-  users using /etc/shadow
-endef
-
-define Package/mosquitto-auth-shadow/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mosquitto_auth_shadow.so $(1)/usr/lib/
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,mosquitto-auth-shadow))

mosquitto-auth-shadow/files/etc/uci-defaults/14_set-shadow-permissions

@@ -1 +0,0 @@
-chown root:shadow /etc/shadow && chmod 0640 /etc/shadow

mosquitto-auth-shadow/src/Makefile

@@ -1,25 +0,0 @@
-#
-# Copyright (c) 2022 Genexis B.V.
-#
-# This program and the accompanying materials are made available under the
-# terms of the Eclipse Public License 2.0 which is available at
-# https://www.eclipse.org/legal/epl-2.0/
-#
-# SPDX-License-Identifier: EPL-2.0
-#
-# Contributors:
-#   Erik Karlsson - initial implementation
-#
-
-TARGETS = mosquitto_auth_shadow.so
-
-all: $(TARGETS)
-
-%.pic.o: %.c
-	$(CC) $(CFLAGS) -Wall -Werror -fPIC -c -o $@ $<
-
-mosquitto_auth_shadow.so: mosquitto_auth_shadow.pic.o
-	$(CC) $(LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(TARGETS)

mosquitto-auth-shadow/src/mosquitto_auth_shadow.c

@@ -1,80 +0,0 @@
-/*
- * Copyright (c) 2022 Genexis B.V.
- *
- * This program and the accompanying materials are made available under the
- * terms of the Eclipse Public License 2.0 which is available at
- * https://www.eclipse.org/legal/epl-2.0/
- *
- * SPDX-License-Identifier: EPL-2.0
- *
- * Contributors:
- *   Erik Karlsson - initial implementation
- */
-
-#include <string.h>
-#include <shadow.h>
-#include <crypt.h>
-#include <mosquitto.h>
-#include <mosquitto_broker.h>
-#include <mosquitto_plugin.h>
-
-static int basic_auth_callback(int event, void *event_data, void *userdata)
-{
-	struct mosquitto_evt_basic_auth *ed = event_data;
-	struct spwd spbuf, *sp = NULL;
-	char buf[256];
-	struct crypt_data data;
-	char *hash;
-
-	/* Let other plugins or broker decide about anonymous login */
-	if (ed->username == NULL)
-		return MOSQ_ERR_PLUGIN_DEFER;
-
-	getspnam_r(ed->username, &spbuf, buf, sizeof(buf), &sp);
-
-	if (sp == NULL || sp->sp_pwdp == NULL)
-		return MOSQ_ERR_AUTH;
-
-	/* Empty string as hash means password is not required */
-	if (sp->sp_pwdp[0] == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	if (ed->password == NULL)
-		return MOSQ_ERR_AUTH;
-
-	memset(&data, 0, sizeof(data));
-	hash = crypt_r(ed->password, sp->sp_pwdp, &data);
-
-	if (hash == NULL)
-		return MOSQ_ERR_AUTH;
-
-	if (strcmp(hash, sp->sp_pwdp) == 0)
-		return MOSQ_ERR_SUCCESS;
-
-	return MOSQ_ERR_AUTH;
-}
-
-int mosquitto_plugin_version(int supported_version_count,
-			     const int *supported_versions)
-{
-	return 5;
-}
-
-int mosquitto_plugin_init(mosquitto_plugin_id_t *identifier,
-			  void **user_data,
-			  struct mosquitto_opt *opts, int opt_count)
-{
-	*user_data = identifier;
-
-	return mosquitto_callback_register(identifier, MOSQ_EVT_BASIC_AUTH,
-					   basic_auth_callback, NULL, NULL);
-}
-
-int mosquitto_plugin_cleanup(void *user_data,
-			     struct mosquitto_opt *opts, int opt_count)
-{
-	mosquitto_plugin_id_t *identifier = user_data;
-
-	return mosquitto_callback_unregister(identifier, MOSQ_EVT_BASIC_AUTH,
-					     basic_auth_callback, NULL);
-}

mqttmngr/LICENSE

@@ -1,308 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
- 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users.  This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it.  (Some other Free Software Foundation software is covered by
-the GNU Lesser General Public License instead.)  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
-  To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must show them these terms so they know their
-rights.
-
-  We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
-  Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software.  If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
-  Finally, any free program is threatened constantly by software
-patents.  We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary.  To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                    GNU GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License.  The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language.  (Hereinafter, translation is included without limitation in
-the term "modification".)  Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
-  1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
-  2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) You must cause the modified files to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    b) You must cause any work that you distribute or publish, that in
-    whole or in part contains or is derived from the Program or any
-    part thereof, to be licensed as a whole at no charge to all third
-    parties under the terms of this License.
-
-    c) If the modified program normally reads commands interactively
-    when run, you must cause it, when started running for such
-    interactive use in the most ordinary way, to print or display an
-    announcement including an appropriate copyright notice and a
-    notice that there is no warranty (or else, saying that you provide
-    a warranty) and that users may redistribute the program under
-    these conditions, and telling the user how to view a copy of this
-    License.  (Exception: if the Program itself is interactive but
-    does not normally print such an announcement, your work based on
-    the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
-    a) Accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of Sections
-    1 and 2 above on a medium customarily used for software interchange; or,
-
-    b) Accompany it with a written offer, valid for at least three
-    years, to give any third party, for a charge no more than your
-    cost of physically performing source distribution, a complete
-    machine-readable copy of the corresponding source code, to be
-    distributed under the terms of Sections 1 and 2 above on a medium
-    customarily used for software interchange; or,
-
-    c) Accompany it with the information you received as to the offer
-    to distribute corresponding source code.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form with such
-    an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it.  For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable.  However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License.  Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
-  5. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Program or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
-  6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
-  7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded.  In such case, this License incorporates
-the limitation as if written in the body of this License.
-
-  9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation.  If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
-  10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission.  For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this.  Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
-                            NO WARRANTY
-
-  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
-  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    uspd - USP Daemon exposing USP API over uBus
-    Copyright (C) 2019  iopsys Software Solutions AB
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

mqttmngr/Makefile

@@ -1,44 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mqttmngr
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqttmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  DEPENDS:= +libbbf_api +mosquitto
-  TITLE:=Package to add Device.MQTT. datamodel support
-endef
-
-define Package/mqttmngr/description
-  Package to add Device.MQTT. datamodel support
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) src/* $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)/files
-	$(CP) files/* $(PKG_BUILD_DIR)/files/
-endef
-
-define Package/mqttmngr/install
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libmqttmngr.so $(1)/usr/lib/bbfdm/libmqttmngr.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/uci-defaults/01-mosquitto-config $(1)/etc/uci-defaults/01-mosquitto-config
-endef
-
-$(eval $(call BuildPackage,mqttmngr))

mqttmngr/README.md

@@ -1,4 +0,0 @@
-# MQTTmngr
-MQTT manager is a lightweight program to manage MQTT broker. It also provides the TR181 datamodel object `Device.MQTT.` using libbbf DotSO plugin.
-
-

mqttmngr/files/etc/uci-defaults/01-mosquitto-config

@@ -1,47 +0,0 @@
-#!/bin/sh
-
-config_mosquitto_owrt() {
-	sec=$(uci -q get mosquitto.owrt)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto owrt)
-		uci -q rename mosquitto."${sec}"="owrt"
-	fi
-
-	uci -q set mosquitto.owrt.use_uci="1"
-	uci -q set mosquitto.owrt.write_pid="0"
-	uci -q commit mosquitto
-}
-
-config_mosquitto_general() {
-	sec=$(uci -q get mosquitto.mosquitto)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto mosquitto)
-		uci -q rename mosquitto."${sec}"="mosquitto"
-	fi
-
-	uci -q set mosquitto.mosquitto.log_dest="syslog"
-	uci -q set mosquitto.mosquitto.include_dir="/etc/mosquitto/conf.d"
-	uci -q set mosquitto.mosquitto.log_facility="5"
-	uci -q set mosquitto.mosquitto.log_timestamp="1"
-	uci -q set mosquitto.mosquitto.log_types="error warning notice"
-	uci -q set mosquitto.mosquitto.per_listener_settings="1"
-	uci -q commit mosquitto
-}
-
-config_mosquitto_persistence() {
-	sec=$(uci -q get mosquitto.persistence)
-	if [ -z "${sec}" ]; then
-		sec=$(uci -q add mosquitto persistence)
-		uci -q rename mosquitto."${sec}"="persistence"
-	fi
-
-	uci -q set mosquitto.persistence.persistence="0"
-	uci -q set mosquitto.persistence.location="/var/run"
-	uci -q commit mosquitto
-}
-
-if [ -f "/etc/config/mosquitto" ]; then 
-	config_mosquitto_owrt
-	config_mosquitto_general
-	config_mosquitto_persistence
-fi

mqttmngr/src/Makefile

@@ -1,17 +0,0 @@
-LIB = libmqttmngr.so
-
-LIB_OBJS = mqtt.o
-
-PROG_CFLAGS = $(CFLAGS) -Wall -Werror -fPIC
-LIB_LDFLAGS = $(LDFLAGS)
-
-%.o: %.c
-	$(CC) $(PROG_CFLAGS) $(FPIC) -c -o $@ $<
-
-all: $(LIB)
-
-$(LIB): $(LIB_OBJS)
-	$(CC) $(PROG_CFLAGS) $(LIB_LDFLAGS) -shared -o $@ $^
-
-clean:
-	rm -f *.o $(LIB)

mqttmngr/src/mqtt.c

@@ -1,334 +0,0 @@
-/*
- * Copyright (C) 2022 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *	Author: Suvendhu Hansa <suvendhu.hansa@iopsys.eu>
- */
-
-#include <libbbf_api.h>
-
-#include "mqtt.h"
-
-static bool duplicate_entry_exist(char *name, char *section_type)
-{
-	bool exist = false;
-	struct uci_section *s = NULL, *stmp = NULL;
-
-	uci_foreach_sections_safe("mosquitto", section_type, stmp, s) {
-		if (DM_STRCMP(name, section_name(s)) == 0) {
-			exist = true;
-			break;
-		}
-	}
-
-	return exist;
-}
-
-/*************************************************************
-* ADD & DEL OBJ
-**************************************************************/
-static int addMQTTBroker(char *refparam, struct dmctx *ctx, void *data, char **instance)
-{
-	struct uci_section *s = NULL, *dmmap_broker = NULL;
-	char sec_name[40];
-
-	snprintf(sec_name, sizeof(sec_name), "broker_%s", *instance);
-
-	if (bbf_uci_add_section("mosquitto", "listener", &s) == 0) {
-		bbf_uci_rename_section(s, sec_name);
-		bbf_uci_set_value_by_section(s, "enabled", "0");
-		bbf_uci_add_section_bbfdm("dmmap_mqtt", "listener", &dmmap_broker);
-		bbf_uci_set_value_by_section(dmmap_broker, "section_name", sec_name);
-		bbf_uci_set_value_by_section(dmmap_broker, "listener_instance", *instance);
-	}
-
-	return 0;
-}
-
-static int delMQTTBroker(char *refparam, struct dmctx *ctx, void *data, char *instance, unsigned char del_action)
-{
-	struct uci_section *s = NULL, *stmp = NULL;
-
-	switch (del_action) {
-	case DEL_INST:
-		bbf_uci_delete_section_by_section(((struct dmmap_dup *)data)->config_section, NULL, NULL);
-		bbf_uci_delete_section_by_section(((struct dmmap_dup *)data)->dmmap_section, NULL, NULL);
-		break;
-	case DEL_ALL:
-		bbf_uci_foreach_sections_safe("users", "user", stmp, s) {
-			struct uci_section *dmmap_section = NULL;
-			get_dmmap_section_of_config_section("dmmap_users", "user", section_name(s), &dmmap_section);
-			bbf_uci_delete_section_by_section(s, NULL, NULL);
-			bbf_uci_delete_section_by_section(dmmap_section, NULL, NULL);
-		}
-		break;
-	}
-	return 0;
-}
-
-/*************************************************************
-* ENTRY METHOD
-*************************************************************/
-static int browseMQTTBrokerInst(struct dmctx *dmctx, DMNODE *parent_node, void *prev_data, char *prev_instance)
-{
-	struct dmmap_dup *p = NULL;
-	char *inst = NULL;
-	LIST_HEAD(dup_list);
-
-	synchronize_specific_config_sections_with_dmmap("mosquitto", "listener", "dmmap_mqtt", &dup_list);
-	list_for_each_entry(p, &dup_list, list) {
-
-		inst = handle_instance(dmctx, parent_node, p->dmmap_section, "listener_instance", "listener_alias");
-
-		if (DM_LINK_INST_OBJ(dmctx, parent_node, (void *)p, inst) == DM_STOP)
-			break;
-	}
-	free_dmmap_config_dup_list(&dup_list);
-	return 0;
-}
-
-/*************************************************************
-* GET & SET PARAM
-**************************************************************/
-static int get_MQTT_BrokerNumberOfEntries(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	int cnt = bbf_get_number_of_entries(ctx, data, instance, browseMQTTBrokerInst);
-	dmasprintf(value, "%d", cnt);
-	return 0;
-}
-
-static int get_MQTTBroker_Alias(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	bbf_uci_get_value_by_section(((struct dmmap_dup *)data)->dmmap_section, "listener_alias", value);
-	if ((*value)[0] == '\0')
-		dmasprintf(value, "cpe-%s", instance);
-	return 0;
-}
-
-static int set_MQTTBroker_Alias(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	switch (action) {
-		case VALUECHECK:
-			if (dm_validate_string(value, -1, 64, NULL, NULL))
-				return FAULT_9007;
-			break;
-		case VALUESET:
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->dmmap_section, "listener_alias", value);
-			return 0;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Enable(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = bbf_uci_get_value_by_section_fallback_def(((struct dmmap_dup *)data)->config_section, "enabled", "0");
-	return 0;
-}
-
-static int set_MQTTBroker_Enable(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	bool b;
-	switch (action) {
-		case VALUECHECK:
-			if (dm_validate_boolean(value))
-				return FAULT_9007;
-			break;
-		case VALUESET:
-			string_to_bool(value, &b);
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->config_section, "enabled", b ? "1" : "0");
-			break;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Name(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	bbf_uci_get_value_by_section(((struct dmmap_dup *)data)->dmmap_section, "section_name", value);
-	return 0;
-}
-
-static int set_MQTTBroker_Name(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *curr_name = NULL;
-
-	switch (action) {
-		case VALUECHECK:
-			if (dm_validate_string(value, -1, 64, NULL, NULL))
-				return FAULT_9007;
-
-			// Check if the value is empty
-			if (*value == '\0')
-				return FAULT_9007;
-
-			// Check if new name is same as current name
-			curr_name = section_name(((struct dmmap_dup *)data)->config_section);
-			if (DM_STRCMP(curr_name, value) == 0)
-				break;
-
-			// check if duplicate entry already exists
-			if (duplicate_entry_exist(value, "listener"))
-				return FAULT_9001;
-
-			break;
-		case VALUESET:
-			// If new name is same as current name then nothing to do
-			curr_name = section_name(((struct dmmap_dup *)data)->config_section);
-			if (DM_STRCMP(curr_name, value) == 0)
-				break;
-
-			// Update mosquitto config
-			if (0 != bbf_uci_rename_section(((struct dmmap_dup *)data)->config_section, value))
-				return FAULT_9001;
-
-			// Update dmmap_users file
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->dmmap_section, "section_name", value);
-
-			break;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Port(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = bbf_uci_get_value_by_section_fallback_def(((struct dmmap_dup *)data)->config_section, "port", "1");
-	return 0;
-}
-
-static int set_MQTTBroker_Port(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	switch (action)	{
-		case VALUECHECK:
-			if (dm_validate_unsignedInt(value, RANGE_ARGS{{"1",NULL}}, 1))
-				return FAULT_9007;
-			break;
-		case VALUESET:
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->config_section, "port", value);
-			break;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Interface(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	char *intf = NULL;
-
-	bbf_uci_get_value_by_section(((struct dmmap_dup *)data)->config_section, "interface", &intf);
-	if (DM_STRLEN(intf) == 0)
-		return 0;
-
-	adm_entry_get_linker_param(ctx, "Device.IP.Interface.", intf, value);
-	return 0;
-}
-
-static int set_MQTTBroker_Interface(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	char *allowed_objects[] = {"Device.IP.Interface.", NULL};
-	char *iface = NULL;
-
-	switch (action)	{
-		case VALUECHECK:
-			if (dm_validate_string(value, -1, 256, NULL, NULL))
-				return FAULT_9007;
-
-			if (dm_entry_validate_allowed_objects(ctx, value, allowed_objects))
-				return FAULT_9007;
-
-			break;
-		case VALUESET:
-			adm_entry_get_linker_value(ctx, value, &iface);
-			if (DM_STRLEN(iface) != 0)
-				bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->config_section, "interface", iface);
-			break;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Username(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	bbf_uci_get_value_by_section(((struct dmmap_dup *)data)->config_section, "username", value);
-	return 0;
-}
-
-static int set_MQTTBroker_Username(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	switch (action) {
-		case VALUECHECK:
-			if (dm_validate_string(value, -1, 64, NULL, NULL))
-				return FAULT_9007;
-
-			// Check if the value is empty
-			if (*value == '\0')
-				return FAULT_9007;
-			break;
-		case VALUESET:
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->config_section, "username", value);
-			break;
-	}
-	return 0;
-}
-
-static int get_MQTTBroker_Password(char *refparam, struct dmctx *ctx, void *data, char *instance, char **value)
-{
-	*value = "";
-	return 0;
-}
-
-static int set_MQTTBroker_Password(char *refparam, struct dmctx *ctx, void *data, char *instance, char *value, int action)
-{
-	switch (action) {
-		case VALUECHECK:
-			if (dm_validate_string(value, -1, 64, NULL, NULL))
-				return FAULT_9007;
-			break;
-		case VALUESET:
-			bbf_uci_set_value_by_section(((struct dmmap_dup *)data)->config_section, "password", value);
-			break;
-	}
-	return 0;
-}
-
-/**********************************************************************************************************************************
-*                                        OBJ & LEAF DEFINITION
-**********************************************************************************************************************************/
-DM_MAP_OBJ tDynamicObj[] = {
-/* parentobj, nextobject, parameter */
-{"Device.", tDeviceMQTTObj, NULL},
-{0}
-};
-
-/* *** Device.MQTT. *** */
-DMOBJ tDeviceMQTTObj[] = {
-/* OBJ, permission, addobj, delobj, checkdep, browseinstobj, nextdynamicobj, dynamicleaf, nextobj, leaf, linker, bbfdm_type, uniqueKeys*/
-{"MQTT", &DMREAD, NULL, NULL, NULL, NULL, NULL, NULL, tMQTTObj, tMQTTParams, NULL, BBFDM_BOTH, NULL, "2.10"},
-{0}
-};
-
-/* *** Device.MQTT.Broker. *** */
-DMOBJ tMQTTObj[] = {
-/* OBJ, permission, addobj, delobj, checkdep, browseinstobj, nextdynamicobj, dynamicleaf, nextobj, leaf, linker, bbfdm_type, uniqueKeys*/
-{"Broker", &DMWRITE, addMQTTBroker, delMQTTBroker, NULL, browseMQTTBrokerInst, NULL, NULL, NULL, tMQTTBrokerParams, NULL, BBFDM_BOTH, LIST_KEY{"Alias", "Name", NULL}, "2.10"},
-{0}
-};
-
-DMLEAF tMQTTParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, bbfdm_type*/
-{"BrokerNumberOfEntries", &DMREAD, DMT_UNINT, get_MQTT_BrokerNumberOfEntries, NULL, BBFDM_BOTH, "2.10"},
-{0}
-};
-
-DMLEAF tMQTTBrokerParams[] = {
-/* PARAM, permission, type, getvalue, setvalue, bbfdm_type*/
-{"Enable", &DMWRITE, DMT_BOOL, get_MQTTBroker_Enable, set_MQTTBroker_Enable, BBFDM_BOTH, "2.10"},
-{"Alias", &DMWRITE, DMT_STRING, get_MQTTBroker_Alias, set_MQTTBroker_Alias, BBFDM_BOTH, "2.10"},
-{"Name", &DMWRITE, DMT_STRING, get_MQTTBroker_Name, set_MQTTBroker_Name, BBFDM_BOTH, "2.10"},
-//{"Status", &DMREAD, DMT_STRING, get_MQTTBroker_Status, NULL, BBFDM_BOTH, "2.10"},
-{"Port", &DMWRITE, DMT_UNINT, get_MQTTBroker_Port, set_MQTTBroker_Port, BBFDM_BOTH, "2.10"},
-{"Interface", &DMWRITE, DMT_STRING, get_MQTTBroker_Interface, set_MQTTBroker_Interface, BBFDM_BOTH, "2.10"},
-{"Username", &DMWRITE, DMT_STRING, get_MQTTBroker_Username, set_MQTTBroker_Username, BBFDM_BOTH, "2.10"},
-{"Password", &DMWRITE, DMT_STRING, get_MQTTBroker_Password, set_MQTTBroker_Password, BBFDM_BOTH, "2.10"},
-{0}
-};
-

mqttmngr/src/mqtt.h

@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2022 iopsys Software Solutions AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License version 2.1
- * as published by the Free Software Foundation
- *
- *      Author: Suvendhu Hansa <suvendhu.hansa@iopsys.eu>
- */
-
-#ifndef _MQTT_H
-#define _MQTT_H
-
-#include "libbbf_api/dmcommon.h"
-
-extern DMOBJ tDeviceMQTTObj[];
-extern DMOBJ tMQTTObj[];
-extern DMLEAF tMQTTParams[];
-extern DMLEAF tMQTTBrokerParams[];
-#endif

obuspa/Config.in

@@ -20,10 +20,6 @@ config OBUSPA_MTP_ENABLE_STOMP
 
 config OBUSPA_MTP_ENABLE_COAP
 	bool "Enable CoAP as mtp protocol"
-	default y
-
-config OBUSPA_CONTROLLER_MTP_VERIFY
-	bool "Enable verification of MQTT response topic before processing the message"
 	default n
 endmenu
 endif

obuspa/Makefile

@@ -5,13 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=obuspa
-PKG_VERSION:=6.0.0.11
+PKG_VERSION:=5.0.0.11
 
 LOCAL_DEV:=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=b8bc6a70f07b40c8512e8894461602f47981df97
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/obuspa.git
-PKG_SOURCE_VERSION:=668748cd4801aa5af12d61d9b0837064b9f933cc
 PKG_MAINTAINER:=Vivek Dutta <vivek.dutta@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -43,14 +43,11 @@ define Package/obuspa/config
 endef
 
 TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
 	-D_GNU_SOURCE \
 	-Wall \
 	-Werror
 
-ifneq ($(CONFIG_OBUSPA_CONTROLLER_MTP_VERIFY),)
-  TARGET_CFLAGS += -DOBUSPA_CONTROLLER_MTP_VERIFY
-endif
-
 ifneq ($(CONFIG_OBUSPA_DB_PATH),)
   CONFIGURE_ARGS += \
 	--localstatedir="$(CONFIG_OBUSPA_DB_PATH)"
@@ -91,7 +88,6 @@ endif
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
         $(CP) -rf ~/git/obuspa/* $(PKG_BUILD_DIR)/
-        $(Build/Patch)
 endef
 endif
 
@@ -101,15 +97,12 @@ define Package/obuspa/install
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/obuspa
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/obuspa $(1)/usr/sbin/
 	$(INSTALL_BIN) ./files/etc/init.d/obuspa $(1)/etc/init.d/
 	$(INSTALL_DATA) ./files/etc/config/obuspa $(1)/etc/config/
 	$(INSTALL_DATA) ./files/etc/obuspa/roles.json $(1)/etc/obuspa/roles.json
 	$(INSTALL_DATA) ./files/etc/obuspa/dmcaching_exclude.json $(1)/etc/obuspa/dmcaching_exclude.json
 	$(INSTALL_DATA) ./files/etc/bbfdm/json/USPAgent.json $(1)/etc/bbfdm/json/USPAgent.json
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/TransferComplete.json $(1)/etc/bbfdm/json/TransferComplete.json
-	$(INSTALL_BIN) ./files/etc/uci-defaults/01-fix-upgrade-uci $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,obuspa))

obuspa/files/etc/config/obuspa

@@ -1,17 +1,30 @@
 config obuspa 'global'
 	option enabled '1'
+	option interface 'loopback'
+	#option ifname 'lo'
 	option debug '1'
 	option log_level '1'
 	option prototrace '0'
-	option db_file '/etc/obuspa/usp.db'
+	#option db_file '/etc/obuspa/usp.db'
 	#option role_file '/etc/obuspa/roles.json'
 	option dm_caching_exclude '/etc/obuspa/dmcaching_exclude.json'
 	#option trust_cert '/etc/obuspa/rootCA.pem'
 	#option client_cert '/etc/obuspa/client.pem'
 	#option log_dest '/var/log/obuspa'
 
+config localagent 'localagent'
+	option Enable '1'
+
+# Adds Device.LocalAgent.Controller.
+config controller 'localcontroller'
+	option EndpointID 'proto::interop-usp-controller'
+	option Protocol 'MQTT'
+	option Topic '/usp/controller'
+	option mqtt 'localmqtt'
+	option assigned_role_name 'full_access'
+
 # Adds Device.LocalAgent.MTP.
-config mtp 'agent_mtp'
+config mtp
 	option Protocol 'MQTT'
 	option ResponseTopicConfigured '/usp/endpoint'
 	option mqtt 'localmqtt'
@@ -22,30 +35,13 @@ config mqtt 'localmqtt'
 	option BrokerPort '1883'
 	option TransportProtocol 'TCP/IP'
 
-# Adds Device.LocalAgent.Controller.
-config controller 'localcontroller'
-	option EndpointID 'proto::interop-usp-controller'
-	option Protocol 'MQTT'
-	option Topic '/usp/controller'
-	option mqtt 'localmqtt'
-	option assigned_role_name 'full_access'
-
 # Add Device.LocalAgent.Subscription.
-#config subscription 'sub_event'
-#    option ID 'uci-sub-events'
-#    option NotifType 'Event'
-#    list ReferenceList 'Device.Boot!'
-#    list ReferenceList 'Device.LocalAgent.TransferComplete!'
-#    option Persistent 'true'
-#    option controller 'localcontroller'
-
-#config subscription 'sub_op_comp'
-#   option ID 'uci-sub-op_complete'
-#   option NotifType 'OperationComplete'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Download()'
-#   list ReferenceList 'Device.DeviceInfo.FirmwareImage.*.Activate()'
-#   option Persistent 'true'
-#   option controller 'localcontroller'
+config subscription
+	option ID 'default-boot-event-ACS'
+	option NotifType 'Event'
+	option ReferenceList 'Device.Boot!'
+	option Persistent 'true'
+	option controller 'localcontroller'
 
 #config challenge 'admin'
 #	option Description 'Request to get Administrative access'

obuspa/files/etc/obuspa/dmcaching_exclude.json

@@ -1,8 +1,7 @@
 {
   "dmcaching_exclude": [
-    "Device.InterfaceStack.",
+    "Device.DeviceInfo.ProcessStatus.Process.",
     "Device.Hosts.Host.",
-    "Device.IEEE1905.",
     "Device.WiFi.DataElements."
   ]
 }

obuspa/files/etc/uci-defaults/01-fix-upgrade-uci

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-fix_stomp_section() {
-	local encryption
-
-	config_get_bool encryption $1 encryption ""
-	if [ -n "${encryption}" ]; then
-		uci_set obuspa $1 encryption ""
-		uci_set obuspa $1 EnableEncryption "$encryption"
-	fi
-}
-
-# fix the stomp encryption parameter
-config_load obuspa
-config_foreach fix_stomp_section stomp
-uci_commit

obuspa/patches/0001-validate-mtp-topic.patch

@@ -1,140 +0,0 @@
-diff --git a/src/core/device.h b/src/core/device.h
-index adf8fa6..072f953 100644
---- a/src/core/device.h
-+++ b/src/core/device.h
-@@ -111,6 +111,7 @@ typedef struct
-     // Following member variables only set if USP message was received over MQTT
-     int mqtt_instance;
-     char *mqtt_topic;           // only set if reply_to was specified in the received MQTT packet
-+    char *mqtt_topic_recv;
- 
- 
-     // Following member variables only set if USP message was received over CoAP
-@@ -252,7 +253,7 @@ void DEVICE_MTP_NotifyMqttConnDeleted(int mqtt_instance);
- int DEVICE_MTP_ValidateMqttReference(dm_req_t *req, char *value);
- void DEVICE_CONTROLLER_SetRolesFromMqtt(int mqtt_instance, ctrust_role_t role);
- char *DEVICE_CONTROLLER_GetControllerTopic(int mqtt_instance);
--
-+int validate_controller_topic_by_endpointid(char *endpointid, mtp_protocol_t proto, char *recv_topic);
- //------------------------------------------------------------------------------
- // Tables used to convert to/from an enumeration to/from a string
- extern const enum_entry_t mtp_protocols[kMtpProtocol_Max];
-diff --git a/src/core/device_controller.c b/src/core/device_controller.c
-index 62c803f..103388d 100755
---- a/src/core/device_controller.c
-+++ b/src/core/device_controller.c
-@@ -239,6 +239,41 @@ int Async_E2ESessionReset(dm_req_t *req, kv_vector_t *input_args, int request);
- extern const enum_entry_t e2e_session_modes[kE2EMode_Max];
- #endif
- 
-+
-+int validate_controller_topic_by_endpointid(char *endpointid, mtp_protocol_t proto, char *recv_topic)
-+{
-+    controller_t *cont = FindEnabledControllerByEndpointId(endpointid);
-+    if (cont == NULL)
-+    {
-+        USP_LOG_Error("not able to find the controller from endpointid [%s]", endpointid);
-+        return USP_ERR_PERMISSION_DENIED;
-+    }
-+#ifdef ENABLE_MQTT
-+    if (proto == kMtpProtocol_MQTT)
-+    {
-+        controller_mtp_t *mtp = FindFirstEnabledMtp(cont, proto);
-+
-+        if (mtp == NULL) {
-+            USP_LOG_Error("Not able to find mtp[%d] for endpointid [%s]", proto, endpointid);
-+            return USP_ERR_REQUEST_DENIED;
-+        }
-+
-+        if (mtp->protocol != proto) {
-+            USP_LOG_Error("No matching mtp[%d] for endpointid [%s]", proto, endpointid);
-+            return USP_ERR_REQUEST_DENIED;
-+        }
-+
-+        char *response_topic = DEVICE_MTP_GetAgentMqttResponseTopic(mtp->mqtt_connection_instance);
-+        if (response_topic && strcmp(response_topic, recv_topic) != 0 ) {
-+            USP_LOG_Error("Controller response topic[%s] and recv topic[%s] mismatch, probably a spoof message", response_topic, recv_topic);
-+            return USP_ERR_PERMISSION_DENIED;
-+        }
-+    }
-+#endif
-+
-+    return USP_ERR_OK;
-+}
-+
- /*********************************************************************//**
- **
- ** DEVICE_CONTROLLER_Init
-diff --git a/src/core/dm_exec.c b/src/core/dm_exec.c
-index c0b95d8..6eb51e2 100755
---- a/src/core/dm_exec.c
-+++ b/src/core/dm_exec.c
-@@ -624,6 +624,7 @@ void DM_EXEC_PostUspRecord(unsigned char *pbuf, int pbuf_len, ctrust_role_t role
-     pur->mtp_reply_to.coap_encryption = mrt->coap_encryption;
-     pur->mtp_reply_to.coap_reset_session_hint = mrt->coap_reset_session_hint;
-     pur->mtp_reply_to.mqtt_topic = USP_STRDUP(mrt->mqtt_topic);
-+    pur->mtp_reply_to.mqtt_topic_recv = USP_STRDUP(mrt->mqtt_topic_recv);
-     pur->mtp_reply_to.mqtt_instance = mrt->mqtt_instance;
-     pur->mtp_reply_to.wsclient_cont_instance = mrt->wsclient_cont_instance;
-     pur->mtp_reply_to.wsclient_mtp_instance = mrt->wsclient_mtp_instance;
-@@ -1144,6 +1145,7 @@ void ProcessMessageQueueSocketActivity(socket_set_t *set)
-             USP_SAFE_FREE(mrt->coap_resource);
-             USP_SAFE_FREE(mrt->mqtt_topic);
-             USP_SAFE_FREE(mrt->cont_endpoint_id);
-+            USP_SAFE_FREE(mrt->mqtt_topic_recv);
-             break;
- 
- #ifndef DISABLE_STOMP
-diff --git a/src/core/mqtt.c b/src/core/mqtt.c
-index 7dba9f4..3ee9c97 100644
---- a/src/core/mqtt.c
-+++ b/src/core/mqtt.c
-@@ -3141,6 +3141,7 @@ void ReceiveMqttMessage(mqtt_client_t *client, const struct mosquitto_message *m
-         mrt.mqtt_topic = response_topic;
-     }
- 
-+    mrt.mqtt_topic_recv = message->topic;
-     // Message may not be valid USP
-     DM_EXEC_PostUspRecord(message->payload, message->payloadlen, client->role, &mrt);
- }
-diff --git a/src/core/msg_handler.c b/src/core/msg_handler.c
-index ce67626..4af9ade 100644
---- a/src/core/msg_handler.c
-+++ b/src/core/msg_handler.c
-@@ -118,7 +118,7 @@ static enum_entry_t mtp_content_types[] = {
- //------------------------------------------------------------------------------
- // Forward declarations. Note these are not static, because we need them in the symbol table for USP_LOG_Callstack() to show them
- int HandleUspMessage(Usp__Msg *usp, char *controller_endpoint, mtp_reply_to_t *mrt);
--int ValidateUspRecord(UspRecord__Record *rec);
-+int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt);
- char *MtpSendItemToString(mtp_send_item_t *msi);
- void CacheControllerRoleForCurMsg(char *endpoint_id, ctrust_role_t role, mtp_protocol_t protocol);
- int QueueUspNoSessionRecord(usp_send_item_t *usi, char *endpoint_id, char *usp_msg_id, mtp_reply_to_t *mrt, time_t expiry_time);
-@@ -172,7 +172,7 @@ int MSG_HANDLER_HandleBinaryRecord(unsigned char *pbuf, int pbuf_len, ctrust_rol
- #endif
- 
-     // Exit if USP record failed validation
--    err = ValidateUspRecord(rec);
-+    err = ValidateUspRecord(rec, mrt);
-     if (err != USP_ERR_OK)
-     {
-         goto exit;
-@@ -725,7 +725,7 @@ exit:
- ** \return  USP_ERR_OK if record is valid
- **
- **************************************************************************/
--int ValidateUspRecord(UspRecord__Record *rec)
-+int ValidateUspRecord(UspRecord__Record *rec, mtp_reply_to_t *mrt)
- {
-     char *endpoint_id;
- 
-@@ -806,6 +806,9 @@ int ValidateUspRecord(UspRecord__Record *rec)
-         return USP_ERR_REQUEST_DENIED;
-     }
- 
-+#if OBUSPA_CONTROLLER_MTP_VERIFY
-+    return validate_controller_topic_by_endpointid(rec->from_id, mrt->protocol, mrt->mqtt_topic_recv);
-+#endif
-     // If the code gets here, then the USP record passed validation, and the encapsulated USP message may be processed
-     return USP_ERR_OK;
- }

obuspa/patches/0002-supress-group-get-error.patch

@@ -1,49 +0,0 @@
-diff --git a/src/core/cli_server.c b/src/core/cli_server.c
-index 701cbd9..103361e 100644
---- a/src/core/cli_server.c
-+++ b/src/core/cli_server.c
-@@ -733,10 +733,6 @@ int ExecuteCli_Get(char *arg1, char *arg2, char *usage)
-             USP_ASSERT(gge->value != NULL);
-             SendCliResponse("%s => %s\n", gge->path, gge->value);
-         }
--        else
--        {
--            SendCliResponse("ERROR: %d retrieving %s (%s)\n", gge->err_code, gge->path, gge->err_msg);
--        }
-     }
- 
-     GROUP_GET_VECTOR_Destroy(&ggv);
-diff --git a/src/core/handle_get.c b/src/core/handle_get.c
-index e1055e0..16b9ceb 100755
---- a/src/core/handle_get.c
-+++ b/src/core/handle_get.c
-@@ -260,26 +260,16 @@ void FormPathExprResponse(int get_expr_index, char *path_expr, get_expr_info_t *
-         return;
-     }
- 
--    // If there was an error in getting any of the parameters associated with the path expression,
--    // then just add the first error, without any of the parameter values, for this path expression result
--    for (i=0; i < gi->num_entries; i++)
--    {
--        gge = &ggv->vector[gi->index + i];
--        if (gge->err_code != USP_ERR_OK)
--        {
--            (void)AddGetResp_ReqPathRes(resp, path_expr, gge->err_code, gge->err_msg);
--            return;
--        }
--    }
--
-     // If the code gets here, then the value of all parameters were retrieved successfully, so add their values to the result_params
-     req_path_result = AddGetResp_ReqPathRes(resp, path_expr, USP_ERR_OK, "");
-     for (i=0; i < gi->num_entries; i++)
-     {
-         gge = &ggv->vector[gi->index + i];
- 
--        // Simple format contains a resolved_path_result for every object (and sub object)
--        AddResolvedPathResult(req_path_result, gge->path, gge->value);
-+        if (gge->err_code == USP_ERR_OK) {
-+            // Simple format contains a resolved_path_result for every object (and sub object)
-+            AddResolvedPathResult(req_path_result, gge->path, gge->value);
-+	}
-     }
- }