asterisk-1.8.x-mod: Makefile: Added place holders for more easy configuring of make options DEBUG and OPTIMIZE

asterisk-1.8.x-mod: Makefile: Add comment for easy enabling of configure option --enable-coverage if CONFIG_DEBUG=y
asterisk-1.8.x-mod: Makefile: Add comments for easy enabling of compiler flags LOADABLE_MODULES and STATIC_BUILD if CONFIG_DEBUG=y
2026-01-01 09:08:56 +08:00 · 2016-03-29 16:30:51 +02:00 · 2016-03-29 16:30:51 +02:00 · 2016-03-29 16:30:51 +02:00 · 2016-03-29 16:30:51 +02:00 · 2016-03-29 16:30:51 +02:00
204 changed files with 1805 additions and 13512 deletions
--- a/4g-support/files/etc/hotplug.d/usb/30-usbnet
+++ b/4g-support/files/etc/hotplug.d/usb/30-usbnet
@@ -1,6 +1,6 @@
 #!/bin/sh

-local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev interface usbno usbbr
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr

 sanitize() {
 	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
@@ -20,7 +20,6 @@ find_usb_attrs() {
 	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
 	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
-	interface=$(cat $usb_dir/interface)
 	if [ -n "$cdcdev" ]; then
 		comdev=$cdcdev
 		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
@@ -49,8 +48,6 @@ case "$usbbr" in
 	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
 esac

-#devno=$(basename $DEVPATH)
-
 find_usb_attrs
 if [ "$ACTION" = add ]; then
 	convert_to_mbim "$uVid:$uPid"
@@ -58,9 +55,6 @@ if [ "$ACTION" = add ]; then
 		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 			sed -i "/$usbno:$usbbr/ d" /var/usbnets
 			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
-			ubus send hotplug.usb "{'action': 'add', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-			'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
-
 		fi
 	fi
 fi
@@ -68,7 +62,5 @@ fi
 if [ "$ACTION" = remove ]; then
 	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
 		sed -i "/$usbno:$usbbr/ d" /var/usbnets
-		ubus send hotplug.usb "{'action': 'remove', 'devpath': '$DEVPATH', 'manufacturer': '$uMa', 'product': '$uPr', 'serial': '$uSe', 'vendor_id': '$uVid', \
-		'product_id': '$uPid', 'driver_interface': '$interface', 'driver': '$DRIVER', 'devtype': '$DEVTYPE'}"
 	fi
 fi
--- a/asterisk-1.8.x-mod/Makefile
+++ b/asterisk-1.8.x-mod/Makefile
@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=asterisk18-mod
 PKG_VERSION:=1.8.10.1

-PKG_SOURCE_VERSION:=ee99af0d91a2197529b13075d802ebc37e644e40
+PKG_SOURCE_VERSION:=ffa46ba1d5abf22fa83d0bd06ea56fe8e638dd43
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x

@@ -19,7 +19,7 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)

-include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/ltqtapi.mk
 include $(INCLUDE_DIR)/package.mk

 define Package/asterisk18-mod/Default
@@ -42,6 +42,9 @@ $(call Package/asterisk18-mod/Default)
  TITLE:=Complete open source PBX, v1.8x
  MENU:=1
  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+ifeq ($(CONFIG_PACKAGE_voice-client),y)
+  DEPENDS+= +voice-client
+endif
 endef

 define Package/asterisk18-mod/description
@@ -119,7 +122,7 @@ endef
 define Package/asterisk18-mod-cdr
 $(call Package/asterisk18-mod/Default)
  TITLE:=CDR support
-  DEPENDS:= asterisk18-mod +libsqlite3
+  DEPENDS:= asterisk18-mod
 endef

 define Package/asterisk18-mod-cdr/description
@@ -188,6 +191,17 @@ $(call Package/asterisk18-mod/Default/description)
 support to Asterisk.
 endef

+define Package/asterisk18-mod-chan-mobile
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Mobile channel support
+  DEPENDS:= asterisk18-mod +bluez-libs
+endef
+
+define Package/asterisk18-mod-chan-mobile/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mobile support to Asterisk.
+endef
+
 define Package/asterisk18-mod-res-timing-timerfd
 $(call Package/asterisk18-mod/Default)
  TITLE:= Timerfd Timing Interface
@@ -330,6 +344,14 @@ else
    --without-spandsp
 endif

+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
+  CONFIGURE_ARGS+= \
+	--with-bluetooth="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-bluetooth
+endif
+
 ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
  CONFIGURE_ARGS+= \
 	--with-srtp="$(STAGING_DIR)/usr"
@@ -373,13 +395,38 @@ CONFIGURE_ARGS+= \
 	--with-sounds-cache="$(DL_DIR)" \
 	--disable-xmldoc

-# I've had strange errors with -fno-caller-saves
-# in global CFLAGS so revert it. /Ronny
-EXTRA_CFLAGS+= -O2 -fcaller-saves
 EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
 EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)

+ifeq ($(CONFIG_DEBUG),y)
+	CONFIGURE_ARGS+= \
+		--enable-dev-mode
+	MENUSELECT_ARGS+= \
+		--enable BETTER_BACKTRACES
+	MENUSELECT_ARGS+= \
+		--enable DEBUG_THREADS
+	MENUSELECT_ARGS+= \
+		--enable DONT_OPTIMIZE
+	MENUSELECT_ARGS+= \
+		--enable MALLOC_DEBUG
+	#MENUSELECT_ARGS+= \
+	#	--disable LOADABLE_MODULES
+	#MENUSELECT_ARGS+= \
+	#	--enable LOW_MEMORY
+	#MENUSELECT_ARGS+= \
+	#	--enable STATIC_BUILD

+	DEBUG:=
+	OPTIMIZE:=
+
+	#CONFIGURE_ARGS+= \
+	#	--enable-coverage
+else
+	MENUSELECT_ARGS+= \
+		--enable LOW_MEMORY
+	DEBUG:=
+	OPTIMIZE:=
+endif

 define Build/Prepare
 	$(call Build/Prepare/Default)
@@ -391,6 +438,10 @@ endef
 define Build/Configure
 	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
 	$(call Build/Configure/Default,,$(SITE_VARS))
+	if test -n "$(MENUSELECT_ARGS)" ; then \
+		$(MAKE) -C "$(PKG_BUILD_DIR)" menuselect.makeopts ; \
+		(cd $(PKG_BUILD_DIR) && ./menuselect/menuselect $(MENUSELECT_ARGS)) ; \
+	fi
 endef

 define Build/Compile
@@ -398,7 +449,7 @@ define Build/Compile
 		include/asterisk/version.h \
 		include/asterisk/buildopts.h defaults.h \
 		makeopts.embed_rules
-	ASTCFLAGS="$(EXTRA_CFLAGS) -DLOW_MEMORY" \
+	ASTCFLAGS="$(EXTRA_CFLAGS)" \
 	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
 	$(MAKE) -C "$(PKG_BUILD_DIR)" \
 		ASTVARLIBDIR="/usr/lib/asterisk" \
@@ -406,8 +457,8 @@ define Build/Compile
 		ASTKEYDIR="/usr/lib/asterisk" \
 		ASTDBDIR="/usr/lib/asterisk" \
 		NOISY_BUILD="1" \
-		DEBUG="" \
-		OPTIMIZE="" \
+		DEBUG="$(DEBUG)" \
+		OPTIMIZE="$(OPTIMIZE)" \
 		DESTDIR="$(PKG_INSTALL_DIR)" \
 		all install samples
 endef
@@ -418,6 +469,7 @@ define Build/InstallDev
 	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
 endef

+ifneq ($(CONFIG_PACKAGE_voice-client),y)
 define Package/asterisk18-mod/conffiles
 /etc/asterisk/asterisk.conf
 /etc/asterisk/modules.conf
@@ -432,14 +484,22 @@ define Package/asterisk18-mod/conffiles
 /etc/default/asterisk
 /etc/init.d/asterisk
 endef
+else
+define Package/asterisk18-mod/conffiles
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+endif

 define Package/asterisk18-mod/install
 	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
 	for f in asterisk extensions features \
 		indications logger manager modules \
 		sip sip_notify rtp; do \
 		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
 	done
+endif
 	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
 	for f in app_dial app_echo app_playback app_macro \
 		chan_sip res_rtp_asterisk res_rtp_multicast \
@@ -455,8 +515,6 @@ define Package/asterisk18-mod/install
 	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
-	$(INSTALL_BIN)  ./files/asterisk.hotplug $(1)/etc/hotplug.d/iface/80-asterisk
 endef

 define Package/asterisk18-mod-sounds/install
@@ -554,6 +612,17 @@ define Package/asterisk18-mod-chan-gtalk/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
 endef

+define Package/asterisk18-mod-chan-mobile/conffiles
+/etc/asterisk/chan_mobile.conf
+endef
+
+define Package/asterisk18-mod-chan-mobile/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
+endef
+
 define Package/asterisk18-mod-res-timing-timerfd/install
 	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
@@ -603,13 +672,17 @@ define Package/asterisk18-mod-chan-skinny/install
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
 endef

+ifneq ($(CONFIG_PACKAGE_voice-client),y)
 define Package/asterisk18-mod-chan-brcm/conffiles
 /etc/asterisk/brcm.conf
 endef
+endif

 define Package/asterisk18-mod-chan-brcm/install
 	$(INSTALL_DIR) $(1)/etc/asterisk
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
 	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+endif
 	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
 endef
@@ -705,6 +778,7 @@ $(eval $(call BuildPackage,asterisk18-mod-cdr))
 $(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
 $(eval $(call BuildPackage,asterisk18-mod-res-voice))
 $(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax))
 $(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
 $(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
--- a/asterisk-1.8.x-mod/files/asterisk.hotplug
+++ b/asterisk-1.8.x-mod/files/asterisk.hotplug
@@ -1,19 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = ifup ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ "$INTERFACE" == "$bindintf" ] || exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
-	bindaddr="${bindaddr:-0.0.0.0}"
-	sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-	[ -e /var/run/asterisk/asterisk.ctl ] && /etc/init.d/asterisk reload
-fi
-
--- a/asterisk-1.8.x-mod/files/asterisk.init
+++ b/asterisk-1.8.x-mod/files/asterisk.init
@@ -3,15 +3,18 @@
 START=98
 STOP=10

-. /usr/share/libubox/jshn.sh
-. /lib/functions/network.sh
 USE_PROCD=1
 NAME=asterisk
 PROG=/usr/sbin/asterisk
 DEFAULT=/etc/default/asterisk
-CONFDIR=/etc/asterisk

 init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
 	[ -f $DEFAULT ] && . $DEFAULT
 	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
 	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
@@ -39,8 +42,6 @@ start_service() {
 }

 reload_service() {
-	asterisk -rx "config reload $CONFDIR/sip.conf"
-	sleep 1
 	asterisk -rx "core reload"
 	asterisk -rx "dialplan reload"
 	asterisk -rx "brcm reload"
--- a/ated/Makefile
+++ b/ated/Makefile
@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))
--- a/bashdb/Makefile
+++ b/bashdb/Makefile
@@ -1,62 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))
--- a/bluez/Makefile
+++ b/bluez/Makefile
@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bluez
+PKG_VERSION:=5.28
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
+PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
+
+PKG_FIXUP:=autoreconf
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/bluez
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
+  TITLE:=Bluetooth stack new version 
+  URL:=http://www.bluez.org/
+endef
+
+define Package/bluez/conffiles
+/etc/config/bluetooth
+endef
+
+TARGET_LDFLAGS+= \
+                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
+
+CONFIGURE_ARGS += \
+		--enable-shared \
+		--disable-cups \
+		--enable-debug \
+		--disable-test \
+		--disable-obex \
+		--disable-systemd \
+		--disable-udev \
+		--enable-tools \
+		--enable-experimental \
+		--enable-library \
+		--disable-static \
+
+define Build/Compile
+    $(MAKE) -C $(PKG_BUILD_DIR) \
+        LDFLAGS="$(TARGET_LDFLAGS) \
+            -L$(ICONV_PREFIX)/lib \
+            -L$(INTL_PREFIX)/lib -lm -lncurses" \
+        DESTDIR="$(PKG_INSTALL_DIR)" \
+        all install
+endef
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
+endef
+define Package/bluez/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
+
+	$(INSTALL_DIR) $(1)/etc/bluetooth
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
+
+	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,bluez))
--- a/bootchart2/Makefile
+++ b/bootchart2/Makefile
@@ -1,43 +0,0 @@
-# 
-# Copyright (C) 2007-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bootchart2
-PKG_VERSION:=0.14.7
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/mmeeks/bootchart.git
-PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bootchart2
- SECTION:=base
- CATEGORY:=Utilities
- TITLE:=Bootchart2
- URL:=https://github.com/mmeeks/bootchart
-endef
-
-define Package/bootchart2/description
- Bootchart is a tool for performance analysis and visualization of the GNU/Linux boot process. 
-endef
-
-define Package/bootchart2/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bootchart-collector $(1)/sbin
-	$(CP) ./files/* $(1)/
-endef
-
-
-
-
-$(eval $(call BuildPackage,bootchart2))
--- a/bootchart2/files/lib/preinit/11_bootchart
+++ b/bootchart2/files/lib/preinit/11_bootchart
@@ -1,10 +0,0 @@
-
-do_bootchart()
-{
-	[ -f /dev/null ] || mknod /dev/null c 1 3
-	mkdir -p /lib/bootchart/tmpfs
-	echo "starting bootchart"
-	/sbin/bootchart_run_preinit boot &
-}
-
-boot_hook_add preinit_essential do_bootchart
--- a/bootchart2/files/lib/preinit/72_bootchart
+++ b/bootchart2/files/lib/preinit/72_bootchart
@@ -1,7 +0,0 @@
-
-bootchart_rootfs_pivot()
-{
-	mount -o move /rom/lib/bootchart/tmpfs /lib/bootchart/tmpfs	
-}
-
-boot_hook_add preinit_mount_root bootchart_rootfs_pivot
--- a/bootchart2/files/sbin/bootchart_run_preinit
+++ b/bootchart2/files/sbin/bootchart_run_preinit
@@ -1,59 +0,0 @@
- #! /bin/sh
-# this is intended to be started in preinit.
-# 11_bootchart, starts it
-# 72_bootchart, fixup mount point after pivot 
-#
-# program can be killed early with
-# bootchart_run_preinit stop
-
-trap "stop; exit 0;" SIGINT SIGTERM 
-
-STOP_AFTER=250
-HZ=50
-
-if [ -z "$1" ]
-then
-	echo "you need to specify start or stop"
-	exit 1
-fi
-
-start()
-{
-	/sbin/bootchart-collector $HZ &
-}
-
-stop()
-{
-	echo "bootchart DUMP"
-	
-	mkdir /tmp/bootchart
-	/sbin/bootchart-collector --dump /tmp/bootchart
-	cd /tmp/bootchart
-	tar -zcf /tmp/bootchart.tgz header *.log
-	cd /
-	rm -rf /tmp/bootchart
-}
-
-case $1 in
-    boot) # secret option for preinit
-	start
-	sleep $STOP_AFTER
-	# test to see if someone has manually killed us
-	if [ -f /tmp/bootchart.tgz ]
-	then
-	    exit 0
-	fi
-	stop
-	;;
-    start)
-	start
-	;;
-    stop)
-	stop
-	;;
-    *)
-	echo "you need to specify start or stop, not $1"
-	exit 1
-	;;
-esac
-
--- a/bootchart2/patches/0001-add_spu_sys_time.patch
+++ b/bootchart2/patches/0001-add_spu_sys_time.patch
@@ -1,40 +0,0 @@
-diff --git a/pybootchartgui/draw.py b/pybootchartgui/draw.py
-index 7c3f60c..5c9f046 100644
--- a/pybootchartgui/draw.py
-+++ b/pybootchartgui/draw.py
-@@ -63,6 +63,7 @@ AXIS_FONT_SIZE = 11
- LEGEND_FONT_SIZE = 12
- 
- # CPU load chart color.
-+CPU_SYS_COLOR = (0.65, 0.13, 0.36, 1.0)
- CPU_COLOR = (0.40, 0.55, 0.70, 1.0)
- # IO wait chart color.
- IO_COLOR = (0.76, 0.48, 0.48, 0.5)
-@@ -300,21 +301,19 @@ def render_charts(ctx, options, clip, trace, curr_y, w, h, sec_w):
- 	# render bar legend
- 	ctx.set_font_size(LEGEND_FONT_SIZE)
- 
-	draw_legend_box(ctx, "CPU (user+sys)", CPU_COLOR, off_x, curr_y+20, leg_s)
-	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "CPU (user)", CPU_COLOR, off_x, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "CPU (sys)", CPU_SYS_COLOR, off_x + 120, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120 + 120 , curr_y+20, leg_s)
- 
- 	# render I/O wait
- 	chart_rect = (off_x, curr_y+30, w, bar_h)
- 	if clip_visible (clip, chart_rect):
- 		draw_box_ticks (ctx, chart_rect, sec_w)
- 		draw_annotations (ctx, proc_tree, trace.times, chart_rect)
-		draw_chart (ctx, IO_COLOR, True, chart_rect, \
-			    [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], \
-			    proc_tree, None)
-+		draw_chart (ctx, IO_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], proc_tree, None)
- 		# render CPU load
-		draw_chart (ctx, CPU_COLOR, True, chart_rect, \
-			    [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], \
-			    proc_tree, None)
-+		draw_chart (ctx, CPU_SYS_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], proc_tree, None)
-+		draw_chart (ctx, CPU_COLOR, True, chart_rect, [(sample.time, sample.user ) for sample in trace.cpu_stats], proc_tree, None)
- 
- 	curr_y = curr_y + 30 + bar_h
- 
--- a/btle_alarm/Makefile
+++ b/btle_alarm/Makefile
@@ -0,0 +1,47 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=btle_alarm
+PKG_VERSION:=1.0.6
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/btle_alarm
+  SECTION:=base
+  CATEGORY:=Utilities
+  TITLE:=Ethernet bridging configuration utility
+  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
+  URL:=http://btle_alarm.sourceforge.net/
+  DEPENDS:=+bluez +libncurses
+endef
+
+define Package/btle_alarm/description
+ Ethernet bridging configuration utility
+ Manage ethernet bridging; a way to connect networks together to
+ form a larger network.
+endef
+
+define Package/btle_alarm/install
+
+	$(CP) ./files/* $(1)/
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
+
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
+
+endef
+
+$(eval $(call BuildPackage,btle_alarm))
--- a/btle_alarm/files/btle_alarm.conf
+++ b/btle_alarm/files/btle_alarm.conf
@@ -0,0 +1,2 @@
+config info 'Device'
+        option mac 'D0:39:72:B6:23:D6'
--- a/btle_alarm/files/etc/init.d/btle_alarm
+++ b/btle_alarm/files/etc/init.d/btle_alarm
@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=99
+
+start() {
+        for i in down reset up;do
+            hciconfig hci0 $i
+        done
+        mac=`uci get btle_alarm.Device.mac`
+        if [ $? -eq 0 ];then
+            hcitool lewladd $mac
+        else
+            hcitool lewladd D0:39:72:B6:43:8A
+            hcitool lewladd D0:39:72:B6:18:AA
+        fi
+       sleep 1
+        /sbin/btle_alarm &> /dev/null &
+        echo $! > /tmp/btle_alarm.pid
+}
+
+stop() {
+        hciconfig hci0 down
+        kill -9 `cat /tmp/btle_alarm.pid`
+        rm /tmp/btle_alarm.pid
+        sleep 1
+}
--- a/catv/files/etc/init.d/catv
+++ b/catv/files/etc/init.d/catv
@@ -10,16 +10,12 @@ USE_PROCD=1

 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0

-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"

 }
--- a/dectmngr/Makefile
+++ b/dectmngr/Makefile
@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk

 PKG_RELEASE:=1
-PKG_VERSION:=1.0.23
+PKG_VERSION:=1.0.24
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=90aff0da98c626d58201c14c34b3b3a64878ceee
+PKG_SOURCE_VERSION:=6ba403663bc9cfdb8f89fb34de367f0796d68552
 PKG_NAME:=dectmngr


--- a/dectmngr/files/etc/dect/nvs_default
+++ b/dectmngr/files/etc/dect/nvs_default
--- a/dectmngr2/Makefile
+++ b/dectmngr2/Makefile
@@ -11,10 +11,14 @@ PKG_RELEASE:=1
 PKG_VERSION:=1.1.0
 PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=13da1568d57b8e6732dadc16de828d64c81906b8
+PKG_SOURCE_VERSION:=a51f8ed1b9178262777f73f7c275d3962f829c8a
 PKG_NAME:=dectmngr2


+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
 RSTRIP:=true
 export BUILD_DIR

@@ -37,17 +41,11 @@ endef


 define Package/dectmngr2/install
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DIR) $(1)/etc/init.d/

-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
-	$(CP) ./files/dect.config $(1)/etc/config/dect
+	cp $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
 endef

 $(eval $(call BuildPackage,dectmngr2))
--- a/dectmngr2/files/dect.config
+++ b/dectmngr2/files/dect.config
@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-
--- a/endptcfg/Config.in
+++ b/endptcfg/Config.in
@@ -1,4 +0,0 @@
-
-config ENDPT_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n
--- a/endptcfg/Makefile
+++ b/endptcfg/Makefile
@@ -11,7 +11,7 @@ PKG_NAME:=endptcfg
 PKG_VERSION:=0.2

 PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
-ifeq ($(CONFIG_ENDPT_OPEN),y)
+ifeq ($(CONFIG_BCM_OPEN),y)
 BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
 PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
@@ -37,7 +37,9 @@ TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfile
 			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
 			-lpthread

+ifeq ($(CONFIG_BRCM_SDK_VER_416040),y)
 TARGET_CFLAGS += -DFAKE_SSP
+endif

 RSTRIP:=true
 export BUILD_DIR
@@ -56,11 +58,7 @@ define Package/endptcfg/description
 	Broadcom endpoint driver configuration application
 endef

-define Package/endptcfg/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifneq ($(CONFIG_ENDPT_OPEN),y)
+ifneq ($(CONFIG_BCM_OPEN),y)
 define Build/Compile
 	$(MAKE) -C $(PKG_BUILD_DIR) \
 		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
--- a/eventlog/Makefile
+++ b/eventlog/Makefile
@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))
--- a/gigaset-elements/.gitignore
+++ b/gigaset-elements/.gitignore
@@ -1,3 +0,0 @@
-
-git-src
-
--- a/gigaset-elements/Makefile
+++ b/gigaset-elements/Makefile
@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-
--- a/ice-client/Config.in
+++ b/ice-client/Config.in
@@ -1,4 +0,0 @@
-
-config ICE_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n
--- a/ice-client/Makefile
+++ b/ice-client/Makefile
@@ -5,10 +5,6 @@ PKG_NAME:=ice-client

 CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
 CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
-
-#CFMODULES:=$(CFMODULES) webaccess texec iperf
-#CFMODULES:=$(sort $(CFMODULES))
-
 $(info Building package: $(PKG_NAME))
 $(info Building with additional modules: $(CFMODULES))
 export CFMODULES
@@ -19,33 +15,32 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk

 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=4.4.0
-PKG_RELEASE:=RC4
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC8
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION

 ###########################--RELEASE--################################

-PKG_SOURCE_VERSION:=e855fdb65ec312e9ec044ce9319d6ac17fde57cd
-ifeq ($(CONFIG_ICE_OPEN),y)
-TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_VERSION:=ecad8b60183b43ecf86543c0c29db46cda8aae29
+ifeq ($(CONFIG_BCM_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
 else
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
-PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz

-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 endif


 ###########################--RELEASE--################################

-#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk

 define Package/ice-client/Default
@@ -58,11 +53,8 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
-endef
-
-define Package/ice-client/config
-	source "$(SOURCE)/Config.in"
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox
+	DEFAULT:=y
 endef

 ###########################--DEVELOPMENT--################################
@@ -78,7 +70,7 @@ endef
 # PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 # 
 #
-# These settings allow you to specify a source folder where your source code is located
+# These settings allow you to specify a soruce folder where your source code is located
 # This avoids having to tar-zip or fetch from git each time
 # Changes can be done in your sources while the build is performed somewhere else
 # If you forget some settings, your source folder will be deleted!!! So be carefull and 
@@ -87,6 +79,7 @@ endef
 #define Build/Prepare
 #	rm -rf $(PKG_BUILD_DIR)
 #	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
 #endef

 ###########################--DEVELOPMENT--################################
@@ -101,7 +94,7 @@ endef
 # command to copy the binary file from its current location (in our case the build
 # directory) to the install directory.

-ifeq ($(CONFIG_ICE_OPEN),y)
+ifeq ($(CONFIG_BCM_OPEN),y)
 define Build/Compile
 endef
 else
@@ -129,7 +122,7 @@ fi
 exit 0
 endef

-ifeq ($(CONFIG_ICE_OPEN),y)
+ifeq ($(CONFIG_BCM_OPEN),y)
 define Package/ice-client/install
 	$(INSTALL_DIR) $(1)/bin
 	$(INSTALL_DIR) $(1)/etc
@@ -144,7 +137,7 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1,webaccessService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1} $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
@@ -160,8 +153,6 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(CP) ./files/ice-client.uci_default $(1)/etc/uci-defaults/95-ice-client
 endef
 endif

@@ -172,14 +163,14 @@ cp /tmp/iopsysserver.ini /etc/iopsys/server.ini
 rm -f /tmp/iopsysserver.ini 
 cp /tmp/ice.back /etc/config/ice 
 rm -f /tmp/ice.back
-if [ -f "/etc/rc.d/S98ice-client" ]; then
-	/etc/init.d/ice-client restart
+if [ -f "/etc/rc.d/S99ice-client" ]; then
+	/etc/init.d/ice-client start
 fi
 exit 0
 endef

 # Additional modules
-ifneq ($(CONFIG_ICE_OPEN),y)
+ifneq ($(CONFIG_BCM_OPEN),y)
 # Camerawatch
 define Package/ice-client-camerawatch
 $(call Package/ice-client/Default)
@@ -492,7 +483,7 @@ endef
 define Package/ice-client-fileme
  $(call Package/ice-client/Default)
  TITLE:=FileMe
-  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
+  DEPENDS+= +lighttpd +samba2-client
 endef

 define Package/ice-client-fileme/description
@@ -893,103 +884,6 @@ fi
 exit 0
 endef

-# texec
-define Package/ice-client-texec
-  $(call Package/ice-client/Default)
-  TITLE:=texec
-  DEPENDS+= 
-endef
-
-define Package/ice-client-texec/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-texec/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-texec/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-texec/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-texec/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
-fi
-exit 0
-endef
-
-# webaccess
-define Package/ice-client-webaccess
-  $(call Package/ice-client/Default)
-  TITLE:=webaccess
-  DEPENDS+= 
-endef
-
-define Package/ice-client-webaccess/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-webaccess/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/webaccessService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-webaccess/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=webaccessService.so.1.0.1" package="ice-client-webaccess" > /tmp/cfin
-fi
-exit 0
-endef
 # bmspeedtest
 define Package/ice-client-bcmspeedmgr
  $(call Package/ice-client/Default)
@@ -1004,26 +898,16 @@ endef
 define Package/ice-client-bcmspeedmgr/install
 	$(INSTALL_DIR) $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
-	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
 endef
-
-define Package/ice-client-bcmspeedmgr/postinst
-#!/bin/sh
-/etc/init.d/bcmspeedtestservice stop
-/etc/init.d/bcmspeedtestservice start
-exit 0
-endef
-
 endif
-
 # This line executes the necessary commands to compile our program.
 # The above define directives specify all the information needed, but this
 # line calls BuildPackage which in turn actually uses this information to
 # build a package.
 $(eval $(call BuildPackage,ice-client))
-ifneq ($(CONFIG_ICE_OPEN),y)
+ifneq ($(CONFIG_BCM_OPEN),y)
 $(eval $(call BuildPackage,ice-client-guest))
 $(eval $(call BuildPackage,ice-client-camerawatch))
 $(eval $(call BuildPackage,ice-client-openvpn))
@@ -1038,7 +922,5 @@ $(eval $(call BuildPackage,ice-client-rework))
 $(eval $(call BuildPackage,ice-client-sip))
 $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
-$(eval $(call BuildPackage,ice-client-texec))
 $(eval $(call BuildPackage,ice-client-bcmspeedmgr))
-$(eval $(call BuildPackage,ice-client-webaccess))
 endif
--- a/ice-client/files/ice-client.uci_default
+++ b/ice-client/files/ice-client.uci_default
@@ -1,63 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	local password="$(db get hw.board.wpaKey)"
-	if [ -n "$password" ]; then
-		adduser -D -H -s /bin/false ice
-		(echo $password; sleep 1; echo $password) | passwd ice >/dev/null 2>&1
-	fi
-}
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-EOF
-}
-
-exit 0
-
--- a/icgroupd/Makefile
+++ b/icgroupd/Makefile
@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2016 Inteno Broadband AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=icgroupd
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Inteno Broadband AB
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/icgroupd
-  SECTION:=base
-  CATEGORY:=Base system
-  TITLE:=Inteno cgroup daemon
-  DEPENDS:=+uci +busybox
-endef
-
-define Package/icgroupd/description
-	This package contains Intenos cgroup daemon and associated
-	configuration and startup scripts.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/icgroupd/install
-	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
-
-	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
-	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
-	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,icgroupd))
-
--- a/icgroupd/files/cgroupd
+++ b/icgroupd/files/cgroupd
@@ -1,76 +0,0 @@
-#!/bin/sh
-
-CGBASEDIR=$1
-CGCONFIG=$2
-[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
-
-[ -r /lib/functions.sh ] || exit 1
-. /lib/functions.sh
-
-CGPROCMAP=/tmp/cgprocmap
-CGPERIOD=3s
-
-DBGLOG=/tmp/cgroupd.log
-DEBUG=0
-
-
-add_to_procmap () {
-	local name_grp=$1
-	local name grp
-
-	name=$(echo $name_grp |awk -F= '{print $1}')
-	grp=$(echo $name_grp |awk -F= '{print $2}')
-
-	echo "($name) $grp" >> $CGPROCMAP
-}
-
-# Read configuration file and create process:group look-up table
-# in /tmp file
-read_config () {
-	local enab
-
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && exit 1
-
-	config_get CGDEFGROUP cgroups defgroup "_undef_"
-	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
-	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
-
-	echo -n '' > $CGPROCMAP
-	config_list_foreach procmap procmap add_to_procmap
-	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
-}
-
-# Move all process except init from cgroup root to cgroups according
-# to /tmp look-up table
-move_wild_procs () {
-	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
-	local pid name grp
-
-	for pid in $wild_procs; do
-
-		[ $pid -eq 1 ] && continue
-		if [ -d /proc/$pid ]; then
-
-			name=$(awk '{print $2}' /proc/$pid/stat)
-			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
-
-			[ "$grp" == "." ] && continue
-			[ -n "$grp" ] || grp=$CGDEFGROUP
-
-			[ "$DEBUG" == "1" ] && \
-			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
-			echo $pid > $CGBASEDIR/$grp/cgroup.procs
-		fi
-	done
-}
-
-
-[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-read_config
-while true; do
-	move_wild_procs
-	sleep $CGPERIOD
-done
--- a/icgroupd/files/cgroups.config
+++ b/icgroupd/files/cgroups.config
@@ -1,48 +0,0 @@
-config cgroups cgroups
-	option enabled 1
-	option defgroup iopsys/normal
-
-config cgroup _root_
-#	list option cpu.rt_runtime_us=50000
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=40000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=30000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=2500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=7500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config procmap procmap
-	list procmap kthreadd=.
-	list procmap minidlna=3prt/normal
-
--- a/icgroupd/files/cgroups.init
+++ b/icgroupd/files/cgroups.init
@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-USE_PROCD=1
-PROCD_DEBUG=1
-NAME=cgroupd
-
-CGBASEDIR=/sys/fs/cgroup
-CGCONFIG="cgroups"
-
-DBGLOG=/tmp/cginit.log
-DEBUG=0
-
-
-cgroupinit_set_knob_value () {
-	local knob_val=$1
-	local dir=$2
-	local knob val
-
-	knob=$(echo $knob_val |awk -F= '{print $1}')
-	val=$(echo $knob_val |awk -F= '{print $2}')
-	/bin/echo $val > $CGBASEDIR/$dir/$knob
-	[ "$DEBUG" == "1" ] && \
-	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
-}
-
-cgroupinit_create_group () {
-	local cgrp=$1
-	local dir
-
-	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
-	if [ "$cgrp" == "_root_" ]; then
-		dir=.
-	else
-		dir=$(echo $cgrp |tr '_' '/')
-
-		if [ ! -d $CGBASEDIR/$dir ]; then
-			mkdir $CGBASEDIR/$dir
-			[ "$DEBUG" == "1" ] && \
-			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
-		fi
-	fi
-
-	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
-}
-
-cgroupinit_configure_cgroups () {
-	local enab defgrp
-
-	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && return 1
-
-	config_get defgrp cgroups defgroup "_undef_"
-	[ "$defgrp" == "_undef_" ] && return 1
-
-	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
-		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
-		[ $? -eq 0 ] || return 1
-	fi
-
-	config_foreach cgroupinit_create_group cgroup
-	return 0
-}
-
-start_service () {
-	cgroupinit_configure_cgroups
-	[ $? -eq 0 ] || return
-
-	procd_open_instance
-	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service () {
-	local cgdir procs prc
-
-	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
-		procs=$(cat $cgdir/cgroup.procs)
-		for prc in $procs; do
-			echo $prc > $CGBASEDIR/cgroup.procs
-		done
-		rmdir $cgdir
-	done
-}
-
-service_triggers() {
-        procd_add_reload_trigger $CGCONFIG
-}
-
--- a/icwmp/Config.in
+++ b/icwmp/Config.in
@@ -15,31 +15,10 @@ config CWMP_ACS_HDM
 	bool "HDM"
 endchoice

-choice
-	prompt "Select Data Model"
-	default tr098
-
-config DATAMODEL_TR098
-	bool "TR-098"
-
-config DATAMODEL_TR181
-	bool "TR-181"
-endchoice
-
 config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y

-choice
-	prompt "enable xmpp feature"
-	default disable
-
-config XMPP_DISABLE
-	bool "disable"
-
-config XMPP_ENABLE
-	bool "enable"
-endchoice
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
--- a/icwmp/Makefile
+++ b/icwmp/Makefile
@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk

 PKG_NAME:=icwmp
-PKG_VERSION:=3.0-2017-05-01
+PKG_VERSION:=3.0-2016-02-24
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a1b5c439524c56dca7a1921d4cf2fcd2d4c1ff0
+PKG_SOURCE_VERSION:=476392f44397a10769efdd96005378732b9e915a
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,7 +34,7 @@ define Package/icwmp/Default
  SECTION:=utils
  CATEGORY:=Utilities
  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt
 endef

 define Package/icwmp/description
@@ -68,7 +68,7 @@ endif

 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
-
+	
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -86,9 +86,6 @@ CONFIGURE_ARGS += \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include

-CONFIGURE_ARGS += $(if $(CONFIG_DATAMODEL_TR181),--enable-datamodel=tr181,--enable-datamodel=tr098)
-CONFIGURE_ARGS += $(if $(CONFIG_XMPP_ENABLE),--enable-xmpp=enable,--enable-xmpp=disable)
-
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -122,11 +119,11 @@ endif

 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
--- a/inbd/Makefile
+++ b/inbd/Makefile
@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=2d474e9ff37b9cfcffd4b9ac8eba8db03eb38a21
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))
--- a/inteno-netmodes/Makefile
+++ b/inteno-netmodes/Makefile
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=inteno-netmodes
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inteno-netmodes
-  CATEGORY:=Base system
-  TITLE:=Predefined Network Modes
-endef
-
-define Package/inteno-netmodes/description
-	Predefined Network Modes
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/inteno-netmodes/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,inteno-netmodes))
--- a/inteno-netmodes/files/etc/config/netmode
+++ b/inteno-netmodes/files/etc/config/netmode
@@ -1,5 +0,0 @@
-config mode 'setup'
-        option dir '/etc/netmodes'
-        option detail ''
-        option curmode 'routed'
-
--- a/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-firewall-handler
+++ b/inteno-netmodes/files/etc/hotplug.d/iface/01-netmode-firewall-handler
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-[ "$INTERFACE" != "wan" ] && exit
-
-. /lib/functions/network.sh
-
-network_get_ipaddr ip $INTERFACE
-
-[ -z "$ip" ] && exit
-
-toggle_firewall() {
-	local section=$1
-	local disable=$2
-	config_get name "$1" name
-	if [ "$name" == "wan" ]; then
-		uci -q set firewall.settings.disabled=$disable
-		if [ "$disable" == "1" ]; then
-			uci -q set firewall.$section.input="ACCEPT"
-		else
-			uci -q set firewall.$section.input="REJECT"
-		fi
-		uci -q commit firewall
-	fi
-}
-
-set_disabled() {
-	config_load firewall
-	config_foreach toggle_firewall zone $1
-}
-
-test_ip() {
-	if [ -n "$(echo $ip | grep -E '^(192\.168|10\.|172\.1[6789]\.|172\.2[0-9]\.|172\.3[01]\.)')" ]; then
-		# private IP
-		set_disabled 1
-	else
-		# public IP
-		set_disabled 0
-		[ "$1" -eq "1" ] && {
-			uci set netmode.setup.repeaterready=0
-			uci commit netmode
-			local pid="$(ps | grep wificontro[l] | awk '/repeater/ {print $1}')"
-			[ "$pid" != "" ] && kill $pid
-			pid="$(pidof netmode-client-detect)"
-			[ "$pid" == "" ] && /sbin/netmode-client-detect &
-		}
-	fi
-}
-
-case "$(uci -q get netmode.setup.curmode)" in
-                repeater*) test_ip ;;
-		*) [ "$(uci -q get netmode.setup.repeaterready)" == "1" ] && test_ip 1;;
-esac
-
--- a/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
+++ b/inteno-netmodes/files/etc/hotplug.d/net/80-repeater
@@ -1,92 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-include /lib/network
-
-ps | grep hotplug | grep button && exit
-
-MTK=0
-[ "$(db -q get hw.board.hardware)" == "EX400" ] && MTK=1
-
-WANDEV="$(uci get layer2_interface_ethernet.Wan.ifname)"
-[ $MTK -eq 1 ] && WANDEV="eth0.2"
-
-[ "$INTERFACE" != "$WANDEV" ] && exit
-
-defroute=$(ip route | grep default | awk '{print$3}')
-
-case "$(uci get netmode.setup.curmode)" in
-		repeater*)
-			echo "Preparing to switch mode"
-		;;
-		*)
-			ping -c 1 -w 5 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-			exit
-		;;
-esac
-
-get_wifi_wet_interface() {
-	handle_interface() {
-		config_get mode "$1" mode
-		if [ "$mode" == "sta" -o "$mode" == "wet" ] ; then
-			config_get ifname "$1" ifname
-			echo "$ifname"
-		fi
-	}
-	config_load wireless
-	config_foreach handle_interface wifi-iface
-}
-
-get_wifi_iface_cfgstr() {
-	get_cfgno() {
-		config_get ifname "$1" ifname
-		[ "$ifname" == "$2" ] && echo "wireless.$1"
-	}
-	config_load wireless
-	config_foreach get_cfgno wifi-iface $1
-}
-
-link=$(cat /sys/class/net/${WANDEV:0:4}/operstate)
-[ $MTK -eq 1 ] && link=$(swconfig dev switch0 port 0 get link | awk '{print$2}' | cut -d':' -f2)
-
-case "$ACTION" in
-	add|register)
-		[ "$link" == "down" ] && return
-		echo "Autoswitch to Extender mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# remove wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=1
-			;;
-		esac
-		uci commit wireless
-		#add wan ethernet port
-		uci set network.wan.ifname="$(echo $WANDEV $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$wetif //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || killall -USR1 udhcpc
-	;;
-	remove|unregister)
-		[ "$link" == "up" ] && return
-		echo "Autoswitch to Repeater mode" > /dev/console
-		sleep 2
-		wetif="$(get_wifi_wet_interface)"
-		# add wifi client interface
-		case "$(uci get netmode.setup.curmode)" in
-			repeater*)
-				uci -q set $(get_wifi_iface_cfgstr $wetif).disabled=0
-			;;
-		esac
-		uci commit wireless
-		#remove wan ethernet port
-		uci set network.wan.ifname="$(echo $wetif $(uci get network.wan.ifname) | sed 's/$/ /' | sed -r "s/$WANDEV //g" | tr ' ' '\n' | sort -u | tr '\n' ' ')"
-		uci commit network
-		ubus call network reload
-		ping -c 1 -w 10 $defroute >/dev/null 2>&1 || {
-			wifi reload nodat
-			killall -USR1 udhcpc
-		}
-	;;
-esac
--- a/inteno-netmodes/files/etc/init.d/netmode
+++ b/inteno-netmodes/files/etc/init.d/netmode
@@ -1,255 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=10
-USE_PROCD=1
-
-. /usr/share/libubox/jshn.sh
-. /lib/network/config.sh
-
-local modedir=$(uci -q get netmode.setup.dir)
-[ -n "$modedir" ] || modedir="/etc/netmodes"
-
-get_device() {
-	local PORT_NAMES=$(db get hw.board.ethernetPortNames)
-	local PORT_ORDER=$(db get hw.board.ethernetPortOrder)
-        local cnt=1
-        local idx=0
-
-	local pnum=$(echo $PORT_NAMES | wc -w)
-
-	if [ $pnum -le 2 ]; then
-		PORT_NAMES=$(echo $PORT_NAMES | sed 's/LAN/LAN1/g')
-	fi
-
-	# get index of interface name
-	for i in $PORT_NAMES; do
-		if [ "$i" == "$1" ]; then
-			idx=$cnt
-		fi
-		cnt=$((cnt+1))
-	done
-
-        # get port name from index
-	cnt=1
-	for i in $PORT_ORDER; do
-		if [ "$cnt" == "$idx" ]; then
-			echo $i
-		fi
-		cnt=$((cnt+1))
-	done
-}
-
-populate_netmodes() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-
-	delete_netmode() {
-		uci delete netmode.$1
-	}
-
-	config_load netmode
-
-	config_foreach delete_netmode netmode
-	uci commit netmode
-
-	wan=$(get_device WAN)
-	lan1=$(get_device LAN1)
-	lan2=$(get_device LAN2)
-	lan3=$(get_device LAN3)
-	lan4=$(get_device LAN4)
-	lan5=$(get_device LAN5)
-
-	for file in $(find $modedir -type f); do
-		conf="$(echo $file | cut -d'/' -f5)"
-		if [ "$conf" == "layer2_interface_ethernet" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-		fi
-		if [ "$conf" == "network" ]; then
-			grep -q "\$WAN" $file && sed -i "s/\$WAN/$wan/g" $file
-			grep -q "\$LAN1" $file && sed -i "s/\$LAN1/$lan1/g" $file
-			grep -q "\$LAN2" $file && sed -i "s/\$LAN2/$lan2/g" $file
-			grep -q "\$LAN3" $file && sed -i "s/\$LAN3/$lan3/g" $file
-			grep -q "\$LAN4" $file && sed -i "s/\$LAN4/$lan4/g" $file
-
-			ifname="$(uci -q get $file.wan.ifname | sed 's/[ \t]*$//')"
-			uci -q set $file.wan.ifname="$ifname"
-			uci -q commit $file
-		fi
-	done
-
-	local hardware=$(db get hw.board.hardware)
-	local keys lang desc exp exclude
-	for mode in $(ls $modedir); do
-
-			case "$mode" in
-				repeater*)
-					wlctl -i wl1 ap >/dev/null 2>&1 || ifconfig rai0 2>/dev/null | grep -q rai0 || continue
-				;;
-			esac
-
-			lang=""
-			desc=""
-			exp=""
-			uci -q set netmode.$mode=netmode
-			json_load "$(cat $modedir/$mode/DETAILS)"
-
-			if json_select excluded_boards; then
-				exclude=0
-				_i=1
-				while json_get_var board $_i; do
-					case "$hardware" in
-						$board)
-							uci -q delete netmode.$mode
-							exclude=1
-							break
-						;;
-					esac
-					_i=$((_i+1))
-				done
-				json_select ..
-				[ $exclude -eq 1 ] && continue
-			fi
-
-			if json_select acl; then
-				_i=1
-				while json_get_var user $_i; do
-					uci add_list netmode.$mode._access_r="$user"
-					_i=$((_i+1))
-				done
-				json_select ..
-			fi
-
-			json_select description
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var desc $lang
-				uci -q set netmode.$mode."desc_$lang"="$desc"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."desc"="$desc"
-				json_select ..
-			done
-			json_select ..
-
-			json_select explanation
-			json_get_keys keys
-			for k in $keys; do
-				json_get_keys lang $k
-				lang=$(echo $lang | sed 's/^[ \t]*//;s/[ \t]*$//')
-				json_select $k
-				json_get_var exp $lang
-				uci -q set netmode.$mode."exp_$lang"="$exp"
-				[ "$lang" == "en" ] && uci -q set netmode.$mode."exp"="$exp"
-				json_select ..
-			done
-			json_select ..
-
-			json_get_var cred credentials
-			uci -q set netmode.$mode.askcred="$cred"
-			json_get_var ulb uplink_band
-			uci -q set netmode.$mode.uplink_band="$ulb"
-			json_get_var reboot reboot
-			uci -q set netmode.$mode.reboot="$reboot"
-	done
-
-	config_get curmode setup curmode
-	[ -d /etc/netmodes/$curmode ] || {
-		[ "$(db -q get hw.board.hardware)" == "EX400" ] && uci -q set netmode.setup.curmode="routed_mtk" || uci -q set netmode.setup.curmode="routed_brcm"
-	}
-
-	uci commit netmode
-}
-
-switch_netmode() {
-	[ -f /etc/config/netmode -a -d $modedir ] || return
-	local curmode conf repeaterready
-
-	config_load netmode
-
-	config_get repeaterready setup repeaterready "0"
-	if [ "$repeaterready" == "1" ] ; then
-		uci -q set netmode.setup.repeaterready="0"
-		uci commit netmode
-	fi
-
-	config_get curmode setup curmode
-	if [ "$curmode" == "repeater" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="repeater_mtk_5g_up_dual_down"
-		else
-			curmode="repeater_brcm_2g_up_dual_down"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	if [ "$curmode" == "routed" ]; then
-		local hw="$(db -q get hw.board.hardware)"
-		if [ "$hw" == "EX400" ]; then
-			curmode="routed_mtk"
-		else
-			curmode="routed_brcm"
-		fi
-		uci set netmode.setup.curmode="$curmode"
-		uci commit netmode
-	fi
-	[ -d "/etc/netmodes/$curmode" ] || return
-	cp /etc/netmodes/$curmode/* /etc/config/
-	rm -f /etc/config/DETAILS
-	sync
-	local reboot=$(uci -q get netmode.$curmode.reboot)
-	local askcred=$(uci -q get netmode.$curmode.askcred)
-	if [ "$reboot" == "0" ]; then
-		/etc/init.d/enviroment reload
-	else
-		reboot &
-	fi
-}
-
-start_client_listener() {
-	local curmode repeaterready
-	config_load netmode
-
-	config_get repeaterready setup repeaterready 0
-
-	[ $repeaterready -eq 1 ] && {
-		killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		return
-	}
-
-	config_get curmode setup curmode
-
-	case "$curmode" in
-		repeater*)
-			killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-		;;
-		*)
-			pidof netmode-client-detect || /sbin/netmode-client-detect &
-		;;
-	esac
-}
-
-start_service() {
-	populate_netmodes
-	start_client_listener
-}
-
-reload_service() {
-        switch_netmode
-
-	# set default JUCI page to overview
-	uci -q set juci.juci.homepage="overview"
-	uci commit juci
-
-	start_client_listener
-}
-
-stop_service() {
-	killall -SIGKILL netmode-client-detect >/dev/null 2>&1
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger netmode
-}
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/bridged/DETAILS
@@ -1,21 +0,0 @@
-{
-	"description": [
-		{ "en" : "Bridged IPTV" },
-		{ "sv" : "Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/bridged/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/firewall
+++ b/inteno-netmodes/files/etc/netmodes/bridged/firewall
@@ -1,117 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/bridged/mcpd
@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/network
+++ b/inteno-netmodes/files/etc/netmodes/bridged/network
@@ -1,37 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/bridged/wireless
+++ b/inteno-netmodes/files/etc/netmodes/bridged/wireless
@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/DETAILS
@@ -1,21 +0,0 @@
-{
-	"description": [
-		{ "en" : "VoIP + Bridged IPTV" },
-		{ "sv" : "VoIP + Brygg IPTV" }
-	],
-	"explanation": [
-		{ "en" : "VoIP on dedicated VLAN + LAN4 port is bridged with IPTV VLAN" },
-		{ "sv" : "VoIP on dedicated VLAN + LAN4 port överbryggas med IPTV VLAN" }
-	],
-	"credentials" : 0,
-	"excluded_boards" : [
-		"CG300",
-		"CG301",
-		"EX400"
-	],
-	"acl" : [
-		"admin",
-		"support"
-	]
-}
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/firewall
@@ -1,117 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	list   network		'iptv'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-	option hidden		1
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-	option hidden		1
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-	option hidden		1
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for SIP and RTP traffic
-config include
-	option path /etc/firewall.sip
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/mcpd
@@ -1,18 +0,0 @@
-
-config mcpd 'mcpd'
-	option igmp_query_response_interval '10'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_lan_to_lan_multicast '0'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_join_immediate '0'
-	option igmp_proxy_enable '0'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-iptv'
-	option igmp_default_version '2'
-	option igmp_query_interval '120'
-	option igmp_proxy_interfaces 'iptv'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/network
@@ -1,45 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'iptv'
-	option type 'bridge'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.100 atm1.1 $WAN.100 $LAN4'
-	option defaultroute '0'
-
-config interface 'voip'
-	option type 'anywan'
-	option proto 'dhcp'
-	option gateway '0.0.0.0'
-	option reqopts 'staticroutes'
-	option ifname 'ptm0.200 atm2.1 $WAN.200'
-	option defaultroute '0'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
+++ b/inteno-netmodes/files/etc/netmodes/internet_iptv_voip/wireless
@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/DETAILS
@@ -1,22 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾5" },
-		{ "sv" : "Repeater 2.4▴▾5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*"
-	],
-	"acl" : [
-		"admin"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_adsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_ethernet
@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vdsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/network
@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_5g_down/wireless
@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/DETAILS
@@ -1,22 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"DG15*",
-		"DG40*",
-		"EG40*",
-		"EX40*"
-	],
-	"acl" : [
-		"admin"
-	],
-	"uplink_band" : "b",
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_adsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_ethernet
@@ -1,6 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-	option bridge '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vdsl
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/network
@@ -1,15 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'wan'
-	option type 'bridge'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option ifname '$WAN.1 $LAN1 $LAN2 $LAN3 $LAN4'
-	option reqopts '43'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_brcm_2g_up_dual_down/wireless
@@ -1,101 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode '11ac'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '0'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '0'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-	option apsta '1'
-
-config wifi-iface
-	option device 'wl1'
-	option ifname 'wl1'
-	option network 'wan'
-	option mode 'wet'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option wps_pbc '0'
-	option wmf_bss_enable '1'
-	option autoconf '1'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'wan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-	option autoconf '1'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/DETAILS
@@ -1,16 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 2.4▴▾2.4&5" },
-		{ "sv" : "Repeater 2.4▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 2.4G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 2.4G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*"
-	],
-	"uplink_band" : 'b',
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/network
@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_2g_up_dual_down/wireless
@@ -1,51 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  1
-	option bandwidth '20'
-	option hwmode   11n
-	option htmode   HT20
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-
-config wifi-device  rai0
-	option band a
-	option channel  36
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apcli0
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/DETAILS
@@ -1,16 +0,0 @@
-{
-	"description": [
-		{ "en" : "Repeater 5▴▾2.4&5" },
-		{ "sv" : "Repeater 5▴▾2.4&5" }
-	],
-	"explanation": [
-		{ "en" : "Your router is going to act as a wired extender or wireless repeater to the selected Wireless Access Point. Uplink 5G & Downlink 2.4G + 5G" },
-		{ "sv" : "Routern kommer att fungera som en trådbunden extender eller trådlös repeater till den valda trådlösa åtkomstpunkten. Uplink 5G & Downlink 2.4G + 5G" }
-	],
-	"excluded_boards" : [
-		"*G*"
-	],
-	"uplink_band" : 'a',
-	"credentials" : 1,
-	"reboot" : 0
-}
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/network
@@ -1,41 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option type 'bridge'
-	option ifname 'eth0.2 eth0.1'
-	option proto 'dhcp'
-	option hostname 'Inteno-$BSSID4'
-	option reqopts '66 67 128 224'
-	option igmp_snooping '0'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/owsd
@@ -1,39 +0,0 @@
-config owsd 'global'
-	option sock '/var/run/ubus.sock'
-	option www '/www'
-	option redirect '/cgi-bin/luci:/cacheflush.html'
-
-config owsd-listen 'loopback'
-	option port '80'
-	option interface 'loopback'
-	option ipv6 'on'
-	list origin '*'
-
-config owsd-listen 'lan'
-	option port '80'
-	option interface 'lan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	option whitelist_dhcp_domains '1'
-
-config owsd-listen 'wan'
-	option port '80'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8080'
-	option port '8080'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
-config owsd-listen 'wan_8181'
-	option port '8181'
-	option interface 'wan'
-	option ipv6 'on'
-	option whitelist_interface_as_origin '1'
-	list origin '*'
-
--- a/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
+++ b/inteno-netmodes/files/etc/netmodes/repeater_mtk_5g_up_dual_down/wireless
@@ -1,51 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  1
-	option bandwidth '20'
-	option hwmode   11n
-	option htmode   HT20
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   ra0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	ra0
-
-config wifi-device  rai0
-	option band a
-	option channel  36
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	rai0
-
-config wifi-iface
-	option device   rai0
-	option network  wan
-	option mode     wet
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-	option ifname	apclii0
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/DETAILS
@@ -1,15 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"EX4*"
-	],
-	"credentials" : 0
-}
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/firewall
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/firewall
@@ -1,153 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto	icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for prioritizing some specific packets
-config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_adsl
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_adsl
@@ -1,13 +0,0 @@
-
-config atm_bridge
-        option link_type 'EoA'
-        option encapseoa 'llcsnap_eth'
-        option unit '0'
-        option ifname 'atm0.1'
-        option baseifname 'atm0'
-        option atmtype 'ubr'
-        option name 'atm_inet'
-        option vpi '8'
-        option vci '35'
-
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_ethernet
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_ethernet
@@ -1,5 +0,0 @@
-config ethernet_interface 'Wan'
-        option baseifname '$WAN'
-        option ifname '$WAN.1'
-        option name 'WAN'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vdsl
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vdsl
@@ -1,9 +0,0 @@
-config vdsl_interface
-	option unit '0'
-	option ifname 'ptm0.1'
-	option baseifname 'ptm0'
-	option name 'VDSL2'
-	option dslat '1'
-	option ptmprio '1'
-	option ipqos '1'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vlan
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/layer2_interface_vlan
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/mcpd
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/mcpd
@@ -1,14 +0,0 @@
-config mcpd 'mcpd'
-	option igmp_proxy_interfaces 'wan'
-	option igmp_default_version '2'
-	option igmp_query_interval '125'
-	option igmp_query_response_interval '100'
-	option igmp_last_member_query_interval '10'
-	option igmp_robustness_value '2'
-	option igmp_max_groups '25'
-	option igmp_max_sources '10'
-	option igmp_max_members '25'
-	option igmp_fast_leave '1'
-	option igmp_proxy_enable '1'
-	option igmp_snooping_enable '2'
-	option igmp_snooping_interfaces 'br-lan'
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/network
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/network
@@ -1,29 +0,0 @@
-
-config interface 'loopback'
-	option is_lan '1'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option is_lan '1'
-	option type 'bridge'
-	option proto 'static'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ifname '$LAN1 $LAN2 $LAN3 $LAN4'
-	option ip6assign '60'
-	
-config interface 'wan'
-	option type 'anywan'
-	option proto 'dhcp'
-	option vendorid '$HARDWAREID-INTENO'
-	option hostname 'Inteno_$MAC4'
-	option ifname 'ptm0.1 atm0.1 $WAN.1'
-	option ipv6 '1'
-
-config interface 'wan6'
-	option proto 'dhcpv6'
-	option ifname '@wan'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_brcm/wireless
@@ -1,86 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device 'wl0'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'a'
-	option bandwidth '80'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option beamforming '1'
-	option doth '1'
-	option dfsc '1'
-
-config wifi-iface
-	option device 'wl0'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'psk2'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
-config wifi-device 'wl1'
-	option type 'broadcom'
-	option country 'EU/13'
-	option band 'b'
-	option bandwidth '20'
-	option hwmode 'auto'
-	option channel 'auto'
-	option scantimer '15'
-	option wmm '1'
-	option wmm_noack '0'
-	option wmm_apsd '1'
-	option txpower '100'
-	option rateset 'default'
-	option frag '2346'
-	option rts '2347'
-	option dtim_period '1'
-	option beacon_int '100'
-	option rxchainps '0'
-	option rxchainps_qt '10'
-	option rxchainps_pps '10'
-	option rifs '0'
-	option rifs_advert '0'
-	option maxassoc '32'
-	option doth '0'
-
-config wifi-iface
-	option device 'wl1'
-	option network 'lan'
-	option mode 'ap'
-	option ssid 'Inteno-$BSSID4'
-	option encryption 'mixed-psk'
-	option cipher 'auto'
-	option key '$WPAKEY'
-	option gtk_rekey '3600'
-	option macfilter '0'
-	option wps_pbc '1'
-	option wmf_bss_enable '1'
-	option bss_max '32'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/DETAILS
@@ -1,15 +0,0 @@
-{
-	"description": [
-		{ "en" : "Fully Routed (NAT)" },
-		{ "sv" : "Fullt Omdirigerad (NAT)" }
-	],
-	"explanation": [
-		{ "en" : "" },
-		{ "sv" : "" }
-	],
-	"excluded_boards" : [
-		"*G*"
-	],
-	"credentials" : 0
-}
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/dhcp
@@ -1,22 +0,0 @@
-config dnsmasq
-	option domainneeded	1
-	option boguspriv	1
-	option filterwin2k	0
-	option localise_queries	1
-	option rebind_protection 0
-	option rebind_localhost 1
-	option local	'/lan/'
-	option domain	'lan'
-	option expandhosts	1
-	option nonegcache	0
-	option authoritative	1
-	option readethers	1
-	option leasefile	'/tmp/dhcp.leases'
-	option resolvfile	'/tmp/resolv.conf.auto'
-
-config dhcp lan
-	option interface	lan
-	option start 	100
-	option limit	150
-	option leasetime	12h
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/firewall
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/firewall
@@ -1,153 +0,0 @@
-config settings 'settings'
-        option disabled '0'
-
-config defaults
-	option syn_flood	1
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		REJECT
-# Uncomment this line to disable ipv6 rules
-#	option disable_ipv6	1
-
-config zone
-	option name		lan
-	list   network		'lan'
-	option input		ACCEPT
-	option output		ACCEPT
-	option forward		ACCEPT
-
-config zone
-	option name		wan
-	list   network		'wan'
-	list   network		'wan6'
-	option input		REJECT
-	option output		ACCEPT
-	option forward		REJECT
-	option masq		1
-	option mtu_fix		1
-
-config forwarding
-	option src		lan
-	option dest		wan
-
-# We need to accept udp packets on port 68,
-# see https://dev.openwrt.org/ticket/4108
-config rule
-	option name		Allow-DHCP-Renew
-	option src		wan
-	option proto		udp
-	option dest_port	68
-	option target		ACCEPT
-	option family		ipv4
-
-# Allow IPv4 ping
-config rule
-	option name		Allow-Ping
-	option src		wan
-	option proto		icmp
-	option icmp_type	echo-request
-	option family		ipv4
-	option target		ACCEPT
-
-config rule
-	option name		Allow-IGMP
-	option src		wan
-	option proto		igmp
-	option family		ipv4
-	option target		ACCEPT
-
-# Allow DHCPv6 replies
-# see https://dev.openwrt.org/ticket/10381
-config rule
-	option name		Allow-DHCPv6
-	option src		wan
-	option proto		udp
-	option src_ip		fe80::/10
-	option src_port		547
-	option dest_ip		fe80::/10
-	option dest_port	546
-	option family		ipv6
-	option target		ACCEPT
-
-config rule
-	option name		Allow-MLD
-	option src		wan
-	option proto		icmp
-	option src_ip		fe80::/10
-	list icmp_type		'130/0'
-	list icmp_type		'131/0'
-	list icmp_type		'132/0'
-	list icmp_type		'143/0'
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential incoming IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Input
-	option src		wan
-	option proto	icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	list icmp_type		router-solicitation
-	list icmp_type		neighbour-solicitation
-	list icmp_type		router-advertisement
-	list icmp_type		neighbour-advertisement
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# Allow essential forwarded IPv6 ICMP traffic
-config rule
-	option name		Allow-ICMPv6-Forward
-	option src		wan
-	option dest		*
-	option proto		icmp
-	list icmp_type		echo-request
-	list icmp_type		echo-reply
-	list icmp_type		destination-unreachable
-	list icmp_type		packet-too-big
-	list icmp_type		time-exceeded
-	list icmp_type		bad-header
-	list icmp_type		unknown-header-type
-	option limit		1000/sec
-	option family		ipv6
-	option target		ACCEPT
-
-# allow IPsec/ESP and ISAKMP passthrough
-config rule
-	option src		wan
-	option dest		lan
-	option proto		esp
-	option target		ACCEPT
-
-config rule
-	option src		wan
-	option dest		lan
-	option dest_port	500
-	option proto		udp
-	option target		ACCEPT
-
-config dmz dmz
-	option enabled '0'
-	option exclude_ports '5060 7547'
-
-# include a file with users custom iptables rules
-config include
-	option path /etc/firewall.user
-	option reload 1
-
-# include a file with rules for prioritizing some specific packets
-config include
-	option path /etc/firewall.qos
-	option reload 1
-
-# include a file with rules for DMZ Host
-config include dmzhost
-	option path /etc/firewall.dmz
-	option reload 1
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/network
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/network
@@ -1,47 +0,0 @@
-config interface 'loopback'
-	option ifname 'lo'
-	option proto 'static'
-	option ipaddr '127.0.0.1'
-	option netmask '255.0.0.0'
-
-config interface 'lan'
-	option type 'bridge'
-	option proto 'static'
-	option is_lan '1'
-	option ipaddr '192.168.1.1'
-	option netmask '255.255.255.0'
-	option ip6assign '60'
-	option ifname 'eth0.1 ra0 rai0'
-
-config device 'lan_dev'
-	option name 'eth0.1'
-	option macaddr '$MACLAN'
-
-config interface 'wan'
-	option ifname 'eth0.2'
-	option proto 'dhcp'
-	option reqopts '66 67 128 224'
-
-config device 'wan_dev'
-	option name 'eth0.2'
-	option macaddr '$MACWAN'
-
-config interface 'wan6'
-	option ifname '@wan'
-	option proto 'dhcpv6'
-
-config switch
-	option name 'switch0'
-	option reset '1'
-	option enable_vlan '1'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '1'
-	option ports '1 6t'
-
-config switch_vlan
-	option device 'switch0'
-	option vlan '2'
-	option ports '0 5t'
-
--- a/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
+++ b/inteno-netmodes/files/etc/netmodes/routed_mtk/wireless
@@ -1,40 +0,0 @@
-config wifi-status 'status'
-	option wlan '1'
-	option wps '1'
-	option sched_status '0'
-	option schedule '0'
-
-config wifi-device  ra0
-	option band b
-	option channel  1
-	option bandwidth '20'
-	option hwmode   11n
-	option htmode   HT20
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   ra0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-
-config wifi-device  rai0
-	option band a
-	option channel  36
-	option bandwidth '80'
-	option hwmode   11ac
-	option htmode   VHT80
-	option country 'DE'
-	option beamforming 0
-
-config wifi-iface
-	option device   rai0
-	option network  lan
-	option mode     ap
-	option ssid     Inteno-$BSSID4
-	option encryption psk2
-	option key      $WPAKEY
-
--- a/inteno-netmodes/files/sbin/netmode-client-detect
+++ b/inteno-netmodes/files/sbin/netmode-client-detect
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-# receive new client events
-# and trigger wificontrol in --router mode for that client
-
-. /usr/share/libubox/jshn.sh
-
-local action ipaddr macaddr network
-
-timed_check() {
-	while true; do
-		wificontrol --router
-		sleep $1
-	done
-}
-
-
-timed_check 60 &
-
-ubus listen client | \
-while read event ; do
-	#echo "netmode-client-detect got event: $event" >/dev/console
-	json_load "$event"
-	json_select client
-	json_get_var action action
-	[ "$action" == "connect" ] || continue
-	json_get_var macaddr macaddr
-	json_get_var ipaddr ipaddr
-	json_get_var network netwrork "lan"
-
-	if echo $macaddr | grep -i -e "^00:22:07" -e "^44:D4:37" -e "^02:0C:07" -e "^06:0C:07"; then
-		echo "netmode-client-detect: a new Inteno device detected on '$network' network (MACAddr:$macaddr IPAddr:$ipaddr)" >/dev/console
-		ubus call repeater get_creds '{"network":"'$network'","file":"/tmp/wificontrol.txt"}'
-		/sbin/wificontrol --router --destination $ipaddr
-	fi
-done
--- a/inteno-netmodes/files/sbin/netmode-conf
+++ b/inteno-netmodes/files/sbin/netmode-conf
@@ -1,180 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-local state="exit"
-
-set_wireless_values() {
-	local iface_num="$1"
-	local ssid="$2"
-	local key="$3"
-	local encryption="$4"
-	local old_ssid old_key old_encryption
-	if ! uci -q get wireless.@wifi-iface[$iface_num] >/dev/null 2>&1; then
-		state="reload"
-		uci add wireless wifi-iface >/dev/null 2>&1
-	fi
-	local network="$(uci -q get wireless.@wifi-iface[$iface_num].network)"
-	old_ssid="$(uci -q get wireless.@wifi-iface[$iface_num].ssid)"
-	old_key="$(uci -q get wireless.@wifi-iface[$iface_num].key)"
-	old_encryption="$(uci -q get wireless.@wifi-iface[$iface_num].encryption)"
-	if [ "$old_ssid" != "$ssid" -o "$old_encryption" != "$encryption" -o "$old_key" != "$key" -o -z "$network" ]; then
-		#TODO: get network dynamicaly
-		[ "$state" == "exit" ] && state="apply"
-		[ -z "$network" ] && network="wan"
-		uci set wireless.@wifi-iface[$iface_num].network="$network"
-		uci set wireless.@wifi-iface[$iface_num].ssid="$ssid"
-		uci set wireless.@wifi-iface[$iface_num].key="$key"
-		uci set wireless.@wifi-iface[$iface_num].encryption="$encryption"
-	fi
-}
-
-get_wifi_device_from_band(){
-	local section="$1"
-	local band="$2"
-	local __ret="$3"
-	local b
-	config_get b $section "band"
-	if [ "$band" == "$b" ]; then
-		eval "export -- \"$__ret=$section\""
-	fi
-}
-
-get_device(){
-	local band="$1"
-	config_foreach get_wifi_device_from_band "wifi-device" "$band" "$2"
-}
-
-get_iface_num() {
-	local device="$1"
-	local prev="$2"
-	local __save="$3"
-	local i=0
-	local dev
-	while true; do
-		[ $i -gt 100 ] && break ## just a safty messure
-		mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-		if [ "$mode" != "ap" ]; then
-			i=$((i+1))
-			break
-		fi
-		dev="$(uci -q get wireless.@wifi-iface[$i].device)"
-		if [ "$dev" != "$device" ]; then
-			[ -z "$dev" ] && break
-			i=$((i+1))
-		elif [ $prev -ne 0 ]; then
-			i=$((i+1))
-			prev=$((prev-1))
-		else
-			break
-		fi
-	done
-	eval "export -- \"$__save=$i\""
-}
-
-###### START HERE #######
-
-local file="$1"
-[ -f "$file" ] || exit
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-local curmode repmode
-config_load netmode
-config_get curmode setup curmode
-
-case $curmode in
-	*repeater*)
-	;;
-	*)
-		uci set netmode.setup.curmode="repeater"
-		uci commit netmode
-		/etc/init.d/netmode reload
-		curmode="$(uci -q get netmode.setup.curmode)"
-	;;
-esac
-
-local apcliband="a"
-case $curmode in
-	*_2g_*) apcliband="b";;
-esac
-
-i=1
-
-local dummy band ssid key encryption device iface_num
-
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	[ "$apcliband" == "$band" ] && break
-	json_select ..
-	i=$((i+1))
-done
-
-[ "$apcliband" == "$band" ] || exit
-
-repeater_iface_num=$(uci -q show wireless | grep -e ".mode='wet'" -e ".mode='sta'"  | sed 's/.*\[\([0-9]\)\].*/\1/')
-[ -z "$repeater_iface_num" ] && exit
-json_get_var ssid ssid
-json_get_var key key
-json_get_var encryption encryption
-
-set_wireless_values "$repeater_iface_num" "$ssid" "$key" "$encryption"
-
-json_load "`cat $file`"
-json_select "wifi_ifaces"
-
-config_load wireless
-local b_num=0
-local a_num=0
-
-i=1
-while json_get_var dummy $i; do
-	json_select $i
-	json_get_var band band
-	get_device "$band" device
-	case $band in
-		a)
-			get_iface_num "$device" "$a_num" iface_num
-			a_num=$((a_num+1))
-			;;
-		b)
-			get_iface_num "$device" "$b_num" iface_num
-			b_num=$((b_num+1))
-			;;
-	esac
-	[ -z $iface_num ] && return
-	json_get_var ssid ssid
-	json_get_var encryption encryption
-	json_get_var key key
-	set_wireless_values "$iface_num" "$ssid" "$key" "$encryption"
-	json_select ..
-	i=$((i+1))
-done
-
-while uci -q get wireless.@wifi-iface[$i] >/dev/null; do
-	local mode="$(uci -q get wireless.@wifi-iface[$i].mode)"
-	if [ "$mode" == "wet" -o "$mode" == "sta" ]; then
-		i=$((i+1))
-		continue
-	fi
-	state="reload"
-	uci -q delete wireless.@wifi-iface[$i] >/dev/null
-	i=$((i+1))
-done
-
-uci commit wireless
-
-if [ "$state" == "exit" ]; then
-	return
-elif [ "$state" == "apply" ]; then
-	# wifi apply
-	wifi reload
-else
-	# wifi reload
-	wifi reload
-fi
-
-[ -f /etc/init.d/layer2_interface_ethernet -a -f /etc/config/layer2_interface_ethernet ] && /etc/init.d/layer2_interface_ethernet reload
--- a/inteno-netmodes/files/usr/libexec/rpcd/repeater
+++ b/inteno-netmodes/files/usr/libexec/rpcd/repeater
@@ -1,141 +0,0 @@
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-get_if_creds() {
-	local section=$1
-	local network=$2
-	local net dev ssid key encryption band
-	config_get net $section "network"
-	if [ "$net" == "$network" ]; then
-		config_get dev $section "device"
-		band="$(uci -q get wireless.$dev.band)"
-		config_get ssid $section ssid
-		config_get key $section key
-		config_get encryption $section encryption
-		config_get disabled $section disabled 0
-		echo "disabled for $band = $disabled" >>/tmp/dbg
-		[ $disabled -eq 1 ] && return
-		[ "$ssid" == "" -o "$band" == "" ] && return
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-	fi
-}
-
-validate_file() {
-	local file="$1"
-	local real="$(readlink -f `dirname $file`)"
-	real="${real}/`basename $file`"
-	case "$real" in
-		/tmp/*)
-			touch $real && return 0 || return 1
-		;;
-		*)
-			return 1
-		;;
-	esac
-}
-
-write_error(){
-	json_init
-	json_add_string "status" "error: $1"
-	json_dump
-	exit 1
-}
-
-duplicate_if_single_radio() {
-	json_select "wifi-ifaces"
-	local i=1
-	local dummy band dup_band num_radios
-
-	num_radios="$(uci -q show wireless | grep wifi-device | wc -l)"
-
-	[ "$num_radios" == "2" ] && return
-
-	band="$(uci -q get wireless.@wifi-device[0].band)"
-
-	[ "$band" == "a" ] && dup_band="b"
-	[ "$band" == "b" ] && dup_band="a"
-	[ -z "$dup_band" ] && return
-
-
-	while json_get_var dummy $i; do
-		i=$((i+1))
-	done
-	i=$((i-1))
-	local ssid key encryption
-	while [ $i -gt 0 ]; do
-		json_select $i
-		json_get_var ssid ssid
-		json_get_var key key
-		json_get_var encryption encryption
-		json_select ..
-		json_add_object
-		json_add_string "ssid" "$ssid"
-		json_add_string "band" "$dup_band"
-		json_add_string "key" "$key"
-		json_add_string "encryption" "$encryption"
-		json_close_object
-		i=$((i-1))
-	done
-}
-
-case "$1" in
-	list)
-		echo '{ "get_creds": { "network": "str", "file": "str" }, "set_creds": { "file": "str" } }'
-	;;
-	call)
-		case "$2" in
-			get_creds)
-				#TODO: if not routed exit
-				local curmode="$(uci -q get netmode.setup.curmode)"
-				case $curmode in
-					*repeater*) write_error "not in repeater mode";;
-				esac
-				local network file input
-				read input
-				json_load $input
-				json_get_var network network
-				json_get_var file file
-
-				json_init
-				json_add_array "wifi-ifaces"
-				config_load wireless
-				config_foreach get_if_creds "wifi-iface" "$network"
-				json_close_array
-
-				duplicate_if_single_radio
-
-				if [ "$file" == "" ]; then
-					json_dump
-				else
-					validate_file $file && json_dump -i >$file || write_error "invalid filename (\"$file\"), file must be in /tmp/ and in an existing directory"
-				fi
-				json_init
-				json_add_string "status" success
-				json_dump
-			;;
-			set_creds)
-				local file
-				read input
-				json_load "$input"
-				json_get_var file file
-				validate_file "$file" || write_error "invalid filename (\"$file\"), file must be in /tmp and exist"
-				json_load "`cat $file`" || write_error "invalid file content"
-				json_select "wifi_ifaces" || write_error "invalid file content"
-
-
-				json_init
-				json_add_string "status" success
-				json_dump
-
-				netmode-conf $file >/dev/null 2>&1 &
-			;;
-		esac
-	;;
-esac
--- a/iop/Makefile
+++ b/iop/Makefile
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=iop
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iop
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=iop utilities
-endef
-
-define Package/iop/description
-	This package contains Intenos Iop utilities
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/iop/install
-	true
-endef
-
-$(eval $(call BuildPackage,iop))
--- a/iop/configs/config
+++ b/iop/configs/config
@@ -1,200 +0,0 @@
-CONFIG_BUILD_NLS=y
-CONFIG_BUSYBOX_CUSTOM=y
-CONFIG_CCACHE=y
-CONFIG_DEBUG=y
-CONFIG_DEVEL=y
-CONFIG_LOCALMIRROR="http://mirror.inteno.se/mirror"
-CONFIG_PACKAGE_6in4=y
-CONFIG_PACKAGE_6rd=y
-CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_6tunnel=y
-CONFIG_PACKAGE_alsa-lib=y
-CONFIG_PACKAGE_chat=y
-CONFIG_PACKAGE_comgt=y
-CONFIG_PACKAGE_comgt-directip=y
-CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_crashlog=y
-CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_gdb=m
-CONFIG_PACKAGE_gdbserver=m
-CONFIG_PACKAGE_getopt=y
-CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_ice-client=y
-CONFIG_PACKAGE_ice-client-camerawatch=m
-CONFIG_PACKAGE_ice-client-fileme=m
-CONFIG_PACKAGE_ice-client-gigaset=m
-CONFIG_PACKAGE_ice-client-guest=m
-CONFIG_PACKAGE_ice-client-iperf=m
-CONFIG_PACKAGE_ice-client-logreader=m
-CONFIG_PACKAGE_ice-client-monitor=m
-CONFIG_PACKAGE_ice-client-netrounds=m
-CONFIG_PACKAGE_ice-client-rshell=m
-CONFIG_PACKAGE_ice-client-texec=m
-CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_inteno-netmodes=y
-CONFIG_PACKAGE_iperf-mt=y
-CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_iup=y
-CONFIG_PACKAGE_iwatchdog=y
-CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-broadcom-dsl=y
-CONFIG_PACKAGE_juci-broadcom-ethernet=y
-CONFIG_PACKAGE_juci-broadcom-iptv=y
-CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
-CONFIG_PACKAGE_juci-broadcom-vlan=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-broadcom-xdsl=y
-CONFIG_PACKAGE_juci-ddns=y
-CONFIG_PACKAGE_juci-diagnostics=y
-CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
-CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-ethernet=y
-CONFIG_PACKAGE_juci-event=y
-CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-icwmp=y
-CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-inteno-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-inteno-provisioning=y
-CONFIG_PACKAGE_juci-inteno-qos=y
-CONFIG_PACKAGE_juci-inteno-voice-client=y
-CONFIG_PACKAGE_juci-macdb=y
-CONFIG_PACKAGE_juci-minidlna=y
-CONFIG_PACKAGE_juci-mod-status=y
-CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-natalie-dect=y
-CONFIG_PACKAGE_juci-netmode=y
-CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-printer=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
-CONFIG_PACKAGE_juci-samba=y
-CONFIG_PACKAGE_juci-simple-gui=y
-CONFIG_PACKAGE_juci-snmpd=y
-CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-theme-inteno=y
-CONFIG_PACKAGE_juci-ubus-core=y
-CONFIG_PACKAGE_juci-upnp=y
-CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-utils=y
-# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
-CONFIG_PACKAGE_kmod-nls-base=y
-CONFIG_PACKAGE_kmod-siit=y
-CONFIG_PACKAGE_layer2interface=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
-# CONFIG_PACKAGE_libcgroup-utils is not set
-CONFIG_PACKAGE_ldd=y
-CONFIG_PACKAGE_libdaemon=y
-CONFIG_PACKAGE_libffmpeg-mini=y
-CONFIG_PACKAGE_libgmp=y
-CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_minidlna=y
-CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mtd-utils=y
-CONFIG_PACKAGE_mtd-utils-deubinize=y
-CONFIG_PACKAGE_mtd-utils-imagewrite=y
-CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
-CONFIG_PACKAGE_mtd-utils-nanddump=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_odhcp6c=y
-CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_PACKAGE_p910nd=y
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
-CONFIG_PACKAGE_power-management=y
-CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
-CONFIG_PACKAGE_qos-scripts=y
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_samba3=y
-CONFIG_PACKAGE_samba3-nmbd=y
-CONFIG_PACKAGE_snmpd=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_tc=y
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_tptest=y
-CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_wget=y
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_xl2tpd=y
-CONFIG_PACKAGE_zoneinfo-core=y
-CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="INT"
-CONFIG_TARGET_ROOTFS_TARGZ=y
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-CONFIG_BUILD_LOG=y
-CONFIG_BUSYBOX_CONFIG_ADDUSER=y
-CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
-CONFIG_BUSYBOX_CONFIG_DELUSER=y
-# CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
-CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
-CONFIG_BUSYBOX_CONFIG_HTTPD=y
-CONFIG_BUSYBOX_CONFIG_INSMOD=y
-CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
-CONFIG_BUSYBOX_CONFIG_LOGIN=y
-CONFIG_BUSYBOX_CONFIG_LSMOD=y
-CONFIG_BUSYBOX_CONFIG_LSPCI=y
-CONFIG_BUSYBOX_CONFIG_LSUSB=y
-CONFIG_BUSYBOX_CONFIG_MICROCOM=y
-CONFIG_BUSYBOX_CONFIG_RMMOD=y
-CONFIG_BUSYBOX_CONFIG_STTY=y
-CONFIG_BUSYBOX_CONFIG_TFTP=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_BUSYBOX_CONFIG_WGET is not set
-# CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
-# CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
-# CONFIG_BUSYBOX_CONFIG_PAM is not set
-# CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
-# CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y
--- a/iop/configs/luci.diff
+++ b/iop/configs/luci.diff
@@ -1,38 +0,0 @@
-CONFIG_PACKAGE_luci=y
-CONFIG_PACKAGE_luci-mod-admin-core=y
-CONFIG_PACKAGE_luci-mod-admin-full=y
-CONFIG_PACKAGE_luci-app-ddns=y
-CONFIG_PACKAGE_luci-app-dslstats=y
-CONFIG_PACKAGE_luci-app-firewall=y
-CONFIG_PACKAGE_luci-app-iup=y
-CONFIG_PACKAGE_luci-app-mcpd=y
-CONFIG_PACKAGE_luci-app-minidlna=y
-CONFIG_PACKAGE_luci-app-multiwan=y
-CONFIG_PACKAGE_luci-app-p910nd=y
-CONFIG_PACKAGE_luci-app-parental-control=y
-CONFIG_PACKAGE_luci-app-port-management=y
-CONFIG_PACKAGE_luci-app-power-mgmt=y
-CONFIG_PACKAGE_luci-app-samba=y
-CONFIG_PACKAGE_luci-app-sfp=y
-CONFIG_PACKAGE_luci-app-snmp=y
-CONFIG_PACKAGE_luci-app-speedtest=y
-CONFIG_PACKAGE_luci-app-upnp=y
-CONFIG_PACKAGE_luci-app-voice=y
-CONFIG_PACKAGE_luci-theme-base=y
-CONFIG_PACKAGE_luci-theme-bootstrap=y
-CONFIG_PACKAGE_luci-i18n-english=y
-CONFIG_PACKAGE_luci-proto-3g=y
-CONFIG_PACKAGE_luci-proto-4g=y
-CONFIG_PACKAGE_luci-proto-core=y
-CONFIG_PACKAGE_luci-proto-ipv6=y
-CONFIG_PACKAGE_luci-proto-ppp=y
-CONFIG_PACKAGE_luci-sgi-cgi=y
-CONFIG_PACKAGE_luci-lib-core=y
-CONFIG_PACKAGE_luci-lib-core_source=y
-CONFIG_PACKAGE_luci-lib-ipkg=y
-CONFIG_PACKAGE_luci-lib-json=y
-CONFIG_PACKAGE_luci-lib-nixio=y
-CONFIG_PACKAGE_luci-lib-nixio_notls=y
-CONFIG_PACKAGE_luci-lib-sys=y
-CONFIG_PACKAGE_luci-lib-web=y
-
--- a/iop/iop.completion
+++ b/iop/iop.completion
@@ -1,89 +0,0 @@
-# Bash completion for IOPSYS "./iop" utility
-# Source this file into the curent shell or copy it into
-# /usr/share/bash-completion/completions/ and start a new shell
-# for automatic availability.
-
-_iop_get_profiles()
-{
-    find feeds/feed_inteno_targets/iopsys-*/ -name '*.diff' \
-        |awk -F'/' '{print$NF}' \
-        |awk -F. '{print$1}'
-}
-
-_iop_get_models()
-{
-    find feeds/feed_inteno_targets/iopsys-*/ -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}' \
-        |egrep '^(cg|dg|eg|vg|vox)[0-9]'
-}
-
-_iop_get_model_customers()
-{
-    local model=$1
-    find customerconfigs/$prev -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}'
-}
-
-_iop() 
-{
-    local cur prev iopcmds
-
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    prev="${COMP_WORDS[COMP_CWORD-1]}"
-
-    iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
-             feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key ssh_sysupgrade \
-             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
-             update_package"
-
-    if [ $COMP_CWORD -eq 1 ] ; then
-
-        # Complete the primary iop command
-        COMPREPLY=($(compgen -W "${iopcmds}" -- ${cur}))  
-        return 0
-
-    else
-    
-        # Complete the arguments to "iopcmds"
-        local cmd="${COMP_WORDS[1]}"
-        case "$cmd" in
-
-            extract_core)
-                if [ "$prev" == "-e" ] ; then
-                    _filedir -d
-                else
-                    COMPREPLY=( $(compgen -W "-e -h" -- ${cur}) )
-                fi
-                return 0
-                ;;
-
-            genconfig)
-                if [ "$prev" == "-p" ] ; then
-                    local profiles=$(_iop_get_profiles)
-                    COMPREPLY=( $(compgen -W "juci $profiles" -- ${cur}) )
-                elif [[ $cur == -* ]] ; then
-                    COMPREPLY=( $(compgen -W "-c -h -p -s -t -u -v" -- ${cur}) )
-                else
-                    local models=$(_iop_get_models)
-                    if echo $models |grep -qw -- $prev ; then
-                        local customers=$(_iop_get_model_customers $prev)
-                        COMPREPLY=( $(compgen -W "$customers" -- ${cur}) )
-                    else
-                        COMPREPLY=( $(compgen -W "$models" -- ${cur}) )
-                    fi
-                fi
-                return 0
-                ;;
-
-            *)
-                # No arguments or arguments not supported yet
-                ;;
-        esac
-    fi
-}
-
-complete -F _iop ./iop
-complete -F _iop iop
-
--- a/iop/scripts/cfe_upgrade.sh
+++ b/iop/scripts/cfe_upgrade.sh
@@ -1,42 +0,0 @@
-# this is a developer helper script to install firmware on a remote host running in CFE mode
-
-function usage {
-	echo "usage: $0 cfe_upgrade <host> <file>"
-}
-
-function cfe_upgrade {
-	if [ -z "$1" ] ; then
-		usage
-		echo "Error: host required"
-		exit 1
-	fi
-	if [ -z "$2" ] ; then
-		usage
-		echo "Error: firmware filename required"
-		exit 1
-	fi
-	if [ ! -e $2 ] ; then
-		usage
-		echo "Error: firmware file does not exist"
-		exit 1
-	fi
-	IMAGE=`basename $2`
-	echo "CFE upgrade host: $1 with file $IMAGE"
-	[ "$2" ] && [ -e "$2" ] &&  curl -i -F filedata=@$2  http://$1/upload.cgi && echo "upgrade done!"
-}
-
-register_command "cfe_upgrade" "<host> <file>  Install firmware on remote host in CFE mode"
-
-function cfe_upgrade_latest {
-	if [ -z "$1" ] ; then
-		echo "usage: $0 cfe_upgrade_latest <host>"
-		echo "Error: host required"
-		exit 1
-	fi
-	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.w | tail -n1`
-		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop cfe_upgrade $1 $IMAGE
-	}
-}
-
-register_command "cfe_upgrade_latest" "<host>  Install latest firmware on remote host in CFE mode"
--- a/iop/scripts/compile.sh
+++ b/iop/scripts/compile.sh
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-function compile {
-	if [ -z "$1" ]; then
-		echo "Please give a valid package as first argument."
-		return 1
-	fi
-
-	local cpath pck
-	local lpath=$(find package/ -type l -name $1)
-	local dpath=$(find package/ -type d -name $1)
-
-	for pck in $lpath $dpath; do
-		if [ -n "$(ls $pck/Makefile 2>/dev/null)" ]; then
-			cpath=$pck
-			break
-		fi
-	done
-
-	if [ -n "$cpath" ]; then
-		make $cpath/compile V=$2
-	else
-		echo "Package $1 does not exist. Make sure you have installed the necessary feed."
-	fi
-}
-
-register_command "compile" "Compile a specific package: ./iop compile <PACKAGE_NAME> [0-99]; i.e ./iop compile netifd 99"
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Patrik Stridvall	479f5ace1c	asterisk-1.8.x-mod: Makefile: Added place holders for more easy configuring of make options DEBUG and OPTIMIZE	2016-03-29 16:30:51 +02:00
Patrik Stridvall	e2458f9094	asterisk-1.8.x-mod: Makefile: Add comment for easy enabling of configure option --enable-coverage if CONFIG_DEBUG=y	2016-03-29 16:30:51 +02:00
Patrik Stridvall	cc81f24afe	asterisk-1.8.x-mod: Makefile: Add comments for easy enabling of compiler flags LOADABLE_MODULES and STATIC_BUILD if CONFIG_DEBUG=y	2016-03-29 16:30:51 +02:00
Patrik Stridvall	b4311b9506	asterisk-1.8.x-mod: Makefile: Enable compiler flags BETTER_BACKTRACES, DEBUG_THREADS, DONT_OPTIMIZE and MALLOC_DEBUG if CONFIG_DEBUG=y	2016-03-29 16:30:51 +02:00
Patrik Stridvall	d709112cec	asterisk-1.8.x-mod: Makefile: Turn off compiler flag LOW_MEMORY if CONFIG_DEBUG=y	2016-03-29 16:30:51 +02:00
Patrik Stridvall	30fcbbe797	asterisk-1.8.x-mod: Makefile: Turn on Asterisk development mode if CONFIG_DEBUG=y	2016-03-29 16:30:51 +02:00
Patrik Stridvall	01e874d94b	asterisk-1.8.x-mod: Makefile: Use menuselect when configuring if required	2016-03-29 16:30:51 +02:00
Patrik Stridvall	27f11d321d	asterisk-1.8.x-mod: Don't install config files that are generated from templates by voice-client if CONFIG_PACKAGE_voice-client=y depend on it instead voice-client: No longer depends on asterisk18-mod (avoids circular dependancy)	2016-03-29 16:27:52 +02:00
Patrik Stridvall	a377af2ccd	voice-client: Declare config files	2016-03-29 16:11:46 +02:00