asterisk-1.8.x-mod: Makefile: Added place holders for more easy configuring of make options DEBUG and OPTIMIZE

voice-client: No longer depends on asterisk18-mod (avoids circular dependancy)

4g-support/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=4g-support
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/4g-support
+  CATEGORY:=Network
+  TITLE:=4G Network Setup Tools
+endef
+
+define Package/4g-support/description
+	4g-support contains necessary tools to setup 4G WAN connection
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/4g-support/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,4g-support))

4g-support/files/etc/gcom/ncmconnection.gcom

@@ -0,0 +1,62 @@
+opengt
+set com 115200n81
+set comecho off
+set senddelay 0.05
+waitquiet 1 0.2
+
+:start
+ if $env("USE_DISCONNECT")="1" goto disconnect
+ send "AT^^NDISDUP=1,1,\""
+ send $env("USE_APN")
+
+ if $env("USE_AUTHTYPE")="-1" goto noauth
+ else goto auth
+
+:noauth
+ send "\"^m"
+ goto result
+
+:auth
+ send "\",\""
+ send $env("USE_USERID")
+ send "\",\""
+ send $env("USE_PASSWORD")
+ send "\","
+ send $env("USE_AUTHTYPE")
+ send "^m"
+ goto result
+
+:result
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto connok
+ if % = 1 goto connerr
+ if % = 2 goto connerr
+
+:connok
+ print "WWAN connection established.\r\n"
+ goto done
+
+:connerr
+ print "WWAN error. Connection failed.\r\n"
+ exit 1
+
+:disconnect
+ send "AT^^NDISDUP=1,0,\""
+ send $env("USE_APN")
+ send "\"^m"
+
+ waitfor 5 "OK","ERR","ERROR"
+ if % = 0 goto disconnok
+ if % = 1 goto disconnerr
+ if % = 2 goto disconnerr
+
+:disconnok
+ print "WWAN connection disconnected.\r\n"
+ goto done
+
+:disconnerr
+ print "WWAN disconnection error.\r\n"
+ exit 1
+
+:done
+ exit 0

4g-support/files/etc/hotplug.d/net/05-mobile

@@ -0,0 +1,35 @@
+. /lib/network/config.sh
+. /usr/share/libubox/jshn.sh
+
+iface_status() {
+	local iface=$1
+	local up
+	json_load "$(ifstatus $iface)"
+	json_get_var up up
+	json_close_object
+	return $up
+}
+
+case "$ACTION" in
+        add|register)
+                if [ "${INTERFACE:0:4}" == "wwan" ]; then
+                        netname=$(get_network_of "$INTERFACE")
+                        for net in $netname; do
+				local service=$(uci -q get network.$net.service)
+				local cnt=0
+				while $(iface_status $net); do
+		                        ifup $net
+					if [ "$service" == "qmi" ]; then
+						cnt=$(($cnt+1))
+						# quit trying if still not online after three times
+						[ $cnt -eq 3 ] && break
+						sleep 5
+					else
+						break
+					fi
+				done
+                        done
+                fi
+        ;;
+esac
+

4g-support/files/etc/hotplug.d/usb/30-usbnet

@@ -0,0 +1,66 @@
+#!/bin/sh
+
+local usb_dir uVid uPid uMa uPr uSe bConf bNumConfs vendor product mdmtyp netdev comdev cdcdev ttydev usbno usbbr
+
+sanitize() {
+	sed -e 's/[[:space:]]\+$//; s/[[:space:]]\+/_/g' "$@"
+}
+
+find_usb_attrs() {
+	usb_dir="/sys/$DEVPATH"
+	[ -f "$usb_dir/idVendor" ] || usb_dir="${usb_dir%/*}"
+
+	uVid=$(cat "$usb_dir/idVendor")
+	uPid=$(cat "$usb_dir/idProduct")
+	uMa=$(sanitize "$usb_dir/manufacturer")
+	uPr=$(sanitize "$usb_dir/product")
+	uSe=$(sanitize "$usb_dir/serial")
+	bNumConfs=$(cat "$usb_dir/bNumConfigurations")
+	bConf=$(cat "$usb_dir/bConfigurationValue")
+	netdev=$(find $usb_dir -name wwan* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	cdcdev=$(find $usb_dir -name cdc-wdm* | awk -F'/' '{print$NF}' | head -2 | tail -1)
+	ttydev=$(ls $(find $usb_dir -name tty | head -2 | tail -1) | tail -1)
+	if [ -n "$cdcdev" ]; then
+		comdev=$cdcdev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'qmi\|mbim' | awk '{print$4}' | head -1)
+	else
+		comdev=$ttydev
+		mdmtyp=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$2}' | head -1)
+		vendor=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$3}' | head -1)
+		product=$(grep $uVid:$uPid /etc/modemdb | grep 'ncm' | awk '{print$4}' | head -1)
+	fi
+	[ -n "$mdmtyp" ] || mdmtyp=$(grep $uVid:$uPid /etc/modemdb | awk '{print$2}' | head -1)
+	[ -n "$vendor" ] || vendor=$(grep $uVid:$uPid /etc/modemdb | awk '{print$3}' | head -1)
+	[ -n "$product" ] || product=$(grep $uVid:$uPid /etc/modemdb | awk '{print$4}' | head -1)
+}
+
+convert_to_mbim() {
+	if [ "$mdmtyp" == "mbim" ] && [ "$bNumConfs" == "2" ]; then
+		[ "$bConf" == "2" ] || echo 2 > $usb_dir/bConfigurationValue
+	fi
+}
+
+usbno=$(echo $DEVPATH | cut -d'/' -f5)
+usbbr=$(echo $DEVPATH | cut -d'/' -f7)
+case "$usbbr" in
+	*:*) usbbr=$(echo $DEVPATH | cut -d'/' -f6) ;;
+esac
+
+find_usb_attrs
+if [ "$ACTION" = add ]; then
+	convert_to_mbim "$uVid:$uPid"
+	if [ -n "$uVid" ] && [ -n "$uPid" ] && [ -n "$mdmtyp" ] && [ -n "$netdev" ] && [ -n "$comdev" ]; then
+		if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+			sed -i "/$usbno:$usbbr/ d" /var/usbnets
+			echo $usbno:$usbbr $uVid:$uPid $uMa $uPr $netdev $comdev $mdmtyp $vendor $product >> /var/usbnets
+		fi
+	fi
+fi
+
+if [ "$ACTION" = remove ]; then
+	if [ -n "$usbno" ] && [ -n "$usbbr" ]; then
+		sed -i "/$usbno:$usbbr/ d" /var/usbnets
+	fi
+fi

4g-support/files/etc/modemdb

@@ -0,0 +1,100 @@
+1bbb:011e	qmi
+1a8d:1001	ecm
+1a8d:100c	ecm
+1a8d:100d	ecm
+16d8:6280	qmi
+16d8:6803	qmi
+16d8:6804	qmi
+16d8:7003	qmi
+16d8:700a	qmi
+2001:7d01	mbim
+2001:7d02	mbim
+2001:7d03	mbim
+12d1:14ac	qmi
+12d1:140c	qmi
+12d1:1506	qmi	Huawei		E367/392/398
+12d1:1506	ncm	Huawei		E3276
+12d1:14d2	qmi
+12d1:1c07	ncm
+12d1:1436	ecm
+12d1:14c9	qmi
+12d1:14db	ecm
+12d1:151d	mbim
+12d1:151e	qmi	Huawei		E353
+12d1:1c1e	ncm
+12d1:150c	qmi
+12d1:150f	qmi
+12d1:151b	qmi
+12d1:142d	ecm
+12d1:1432	ecm
+12d1:1c1f	ncm
+12d1:1433	qmi
+12d1:1465	ecm
+12d1:14ca	qmi
+12d1:14cf	ncm
+12d1:14bc	ecm
+12d1:14ae	ecm
+12d1:1576	mbim
+12d1:1577	mbim
+12d1:1400	mbim
+12d1:14f7	mbim
+12d1:1464	qmi
+12d1:14cb	qmi
+12d1:14cc	qmi
+12d1:14c6	qmi
+12d1:14fa	mbim
+12d1:1578	mbim
+12d1:14c8	qmi
+12d1:14f8	mbim
+12d1:1575	mbim
+12d1:1579	mbim
+12d1:157a	mbim
+12d1:157b	mbim
+12d1:157f	mbim
+12d1:1f16	mbim	Vodafone	K5150
+12d1:1404	qmi
+19f2:1700	ecm	
+1410:b001	qmi
+1527:1000	ecm
+0b3c:c005	qmi
+0f3d:68a2	qmi
+1199:68a2	qmi	SierraWireless	M7710
+1199:68c0	qmi	SierraWireless	M7304
+1349:1100	qmi
+1349:1200	qmi	
+1199:683c	qmi
+2360:2100	qmi
+2360:2200	qmi
+2360:2300	qmi
+2507:0000	qmi	
+19d2:0055	qmi
+19d2:0052	qmi
+19d2:0063	qmi
+19d2:1008	qmi
+19d2:1010	qmi
+19d2:2002	qmi
+19d2:1176	qmi
+19d2:1023	mbim
+19d2:0104	qmi
+19d2:1018	qmi
+19d2:1032	mbim
+19d2:1402	qmi
+19d2:1405	ecm
+19d2:1426	qmi
+19d2:0031	qmi
+19d2:0124	qmi
+19d2:1254	qmi
+19d2:0017	qmi
+19d2:0002	qmi
+19d2:0121	qmi
+19d2:1252	qmi
+19d2:0157	qmi
+19d2:0167	qmi
+19d2:0199	qmi
+19d2:0257	qmi
+19d2:0326	qmi
+19d2:0349	ecm
+19d2:1408	ecm
+19d2:0284	qmi
+19d2:0019	qmi
+19d2:0265	qmi

4g-support/files/lib/netifd/proto/4g.sh

@@ -0,0 +1,159 @@
+#!/bin/sh
+INCLUDE_ONLY=1
+
+. /lib/functions.sh
+. ../netifd-proto.sh
+init_proto "$@"
+
+proto_4g_init_config() {
+	proto_config_add_string "modem"
+	proto_config_add_string "service"
+	proto_config_add_string "comdev"
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "netmask"
+	proto_config_add_string "hostname"
+	proto_config_add_string "clientid"
+	proto_config_add_string "vendorid"
+	proto_config_add_boolean "broadcast"
+	proto_config_add_string "reqopts"
+	proto_config_add_string "apn"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_boolean "lte_apn_use"
+	proto_config_add_string "lte_apn"
+	proto_config_add_string "lte_username"
+	proto_config_add_string "lte_password"
+	proto_config_add_string "pincode"
+	proto_config_add_string "technology"
+	proto_config_add_string "auto"
+}
+
+proto_4g_setup() {
+	local config="$1"
+	local iface="$2"
+
+        local ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+        json_get_vars ipaddr hostname clientid vendorid broadcast reqopts iface6rd sendopts delegate zone6rd zone
+
+        local opt dhcpopts
+        for opt in $reqopts; do
+                append dhcpopts "-O $opt"
+        done
+
+        for opt in $sendopts; do
+                append dhcpopts "-x $opt"
+        done
+
+        [ "$broadcast" = 1 ] && broadcast="-B" || broadcast=
+        [ -n "$clientid" ] && clientid="-x 0x3d:${clientid//:/}" || clientid="-C"
+        [ -n "$iface6rd" ] && proto_export "IFACE6RD=$iface6rd"
+        [ "$iface6rd" != 0 -a -f /lib/netifd/proto/6rd.sh ] && append dhcpopts "-O 212"
+        [ -n "$zone6rd" ] && proto_export "ZONE6RD=$zone6rd"
+        [ -n "$zone" ] && proto_export "ZONE=$zone"
+        [ "$delegate" = "0" ] && proto_export "IFACE6RD_DELEGATE=0"
+
+        json_get_var comdev comdev
+        json_get_var apn apn
+        json_get_var service service
+        json_get_var pincode pincode
+
+
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			[ -n "$pincode" ] && {
+				if ! mbimcli -d $comdev --query-pin-state 2>&1 | grep -q "unlocked"; then
+					set -o pipefail
+					if ! mbimcli -d $comdev --enter-pin="${pincode}" 2>&1; then
+						mbimcli -d $comdev --query-pin-state
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" mbim-network $comdev start
+		;;
+		ncm)
+			[ -n "$pincode" ] && echo $pincode | gcom -d $comdev
+			USE_APN="$apn" gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			[ -n "$pincode" ] && {
+				if ! qmicli -d $comdev --dms-uim-get-pin-status 2>&1 | grep -q "enabled-verified\|disabled" >/dev/null; then
+					set -o pipefail
+					if ! qmicli -d $comdev --dms-uim-verify-pin="PIN,${pincode}" 2>&1; then
+						qmicli -d $comdev --dms-uim-get-pin-status
+						proto_notify_error "$config" PIN_FAILED
+						proto_block_restart "$interface"
+						return 1
+					fi
+				fi
+			}
+			APN="$apn" qmi-network $comdev start
+		;;		
+	esac
+	
+	proto_export "INTERFACE=$config"
+	proto_run_command "$config" udhcpc -R \
+		-p /var/run/udhcpc-$iface.pid \
+		-s /lib/netifd/dhcp.script \
+		-f -t 0 -i "$iface" \
+		${ipaddr:+-r $ipaddr} \
+		${hostname:+-H $hostname} \
+		${vendorid:+-V $vendorid} \
+		$clientid $broadcast $dhcpopts
+}
+
+proto_4g_teardown() {
+	local interface="$1"
+	local iface="$2"
+	local modem service comdev
+
+        config_load network
+        config_get service $interface service
+        config_get comdev $interface comdev
+
+#	config_get modem $interface modem
+#	if [ -n "$modem" ]; then
+#		service=$(echo $modem | cut -d':' -f1)
+#		comdev=$(echo $modem | cut -d':' -f2)
+#		iface=$(echo $modem | cut -d':' -f3)
+#	fi
+	
+	case "$service" in
+		ecm)
+		;;
+		eem)
+		;;
+		mbim)
+			local mbimdev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$mbimdev}"
+			mbim-network $comdev stop
+		;;
+		ncm)
+			USE_DISCONNECT=1 gcom -d $comdev -s /etc/gcom/ncmconnection.gcom
+		;;
+		qmi)
+			local qmidev=/dev/$(basename $(ls /sys/class/net/${iface}/device/usb/cdc-wdm* -d))
+			local comdev="${comdev:-$qmidev}"
+			qmi-network $comdev stop
+		;;		
+	esac
+	proto_kill_command "$interface"
+}
+
+add_protocol 4g

asterisk-1.8.x-mod/Makefile

@@ -0,0 +1,847 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=asterisk18-mod
+PKG_VERSION:=1.8.10.1
+
+PKG_SOURCE_VERSION:=ffa46ba1d5abf22fa83d0bd06ea56fe8e638dd43
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/asterisk-1.8.x
+
+PKG_RELEASE:=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION)-$(PKG_RELEASE).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/ltqtapi.mk
+include $(INCLUDE_DIR)/package.mk
+
+define Package/asterisk18-mod/Default
+  SUBMENU:=Telephony
+  SECTION:=net
+  CATEGORY:=Network
+  URL:=http://www.asterisk.org/
+endef
+
+define Package/asterisk18-mod/Default/description
+ Asterisk is a complete PBX in software. It provides all of the features
+ you would expect from a PBX and more. Asterisk does voice over IP in three
+ protocols, and can interoperate with almost all standards-based telephony
+ equipment using relatively inexpensive hardware.
+endef
+
+
+define Package/asterisk18-mod
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Complete open source PBX, v1.8x
+  MENU:=1
+  DEPENDS:= +natalie-dect-h +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen +libopenssl +libncurses +libpopt +libpthread +uci +ubus +zlib @!TARGET_avr32
+ifeq ($(CONFIG_PACKAGE_voice-client),y)
+  DEPENDS+= +voice-client
+endif
+endef
+
+define Package/asterisk18-mod/description
+$(call Package/asterisk18-mod/Default/description)
+endef
+
+define Package/asterisk18-mod-sounds
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Sound files
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-sounds/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains sound files for Asterisk.
+endef
+
+define Package/asterisk18-mod-voicemail
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voicemail support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-voicemail/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains voicemail related modules for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-transfer
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Call transfer support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-transfer/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the call transfer support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-softhangup
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SoftHangup application
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-softhangup/description
+$(call Package/asterisk18-mod/Default/description)
+ This package contains the SoftHangup support module for Asterisk.
+endef
+
+define Package/asterisk18-mod-app-meetme
+$(call Package/asterisk18-mod/Default)
+  TITLE:=conferencing support
+  DEPENDS:= asterisk18-mod +dahdi-tools-libtonezone +dahdi
+endef
+
+define Package/asterisk18-mod-app-meetme/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the MeetMe application driver Conferencing support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-iax2
+$(call Package/asterisk18-mod/Default)
+  TITLE:=IAX support
+  DEPENDS:= asterisk18-mod +asterisk18-res-crypto
+endef
+
+define Package/asterisk18-mod-chan-iax2/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides IAX support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-cdr
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CDR support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-cdr/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Call Detail Record support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-musiconhold
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MOH support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-musiconhold/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Music On Hold support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-voice
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Voice client/pbx support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-voice/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides Voice Client/pbx support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-srtp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=SRTP support
+  DEPENDS:= asterisk18-mod libsrtp +asterisk18-mod-res-crypto
+endef
+
+define Package/asterisk18-mod-res-srtp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides SRTP support to
+ Asterisk.
+endef
+
+define Package/asterisk18-mod-res-stun
+$(call Package/asterisk18-mod/Default)
+  TITLE:=STUN support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-app-queue
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Queue support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-gtalk
+$(call Package/asterisk18-mod/Default)
+  TITLE:=GTalk support
+  DEPENDS:= asterisk18-mod +libiksemel
+endef
+
+define Package/asterisk18-mod-chan-gtalk/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_gtalk and res_jabber for GTalk
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-mobile
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Mobile channel support
+  DEPENDS:= asterisk18-mod +bluez-libs
+endef
+
+define Package/asterisk18-mod-chan-mobile/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mobile support to Asterisk.
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd
+$(call Package/asterisk18-mod/Default)
+  TITLE:= Timerfd Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-timing-pthread
+$(call Package/asterisk18-mod/Default)
+  TITLE:= pthread Timing Interface
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-res-fax
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Generic FAX Resource for FAX technology resource modules
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-timing-pthread
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Spandsp T.38 and G.711 FAX Resource
+  DEPENDS:= asterisk18-mod +asterisk18-mod-res-fax +libspandsp
+endef
+
+define Package/asterisk18-mod-chan-mgcp
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MGCP channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-mgcp/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_mgcp support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-skinny
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Skinny channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-skinny/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_skinny support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-brcm
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Broadcom channel support
+  DEPENDS:= asterisk18-mod
+endef
+
+define Package/asterisk18-mod-chan-brcm/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_brcm support to Asterisk.
+endef
+
+define Package/asterisk18-mod-curl
+$(call Package/asterisk18-mod/Default)
+  TITLE:=CURL support
+  DEPENDS:= asterisk18-mod +libcurl
+endef
+
+define Package/asterisk18-mod-curl/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides CURL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-mysql
+$(call Package/asterisk18-mod/Default)
+  TITLE:=MySQL support
+  DEPENDS:= asterisk18-mod +PACKAGE_asterisk18-mysql:libmysqlclient
+endef
+
+define Package/asterisk18-mod-mysql/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides MySQL
+ support to Asterisk.
+endef
+
+define Package/asterisk18-mod-chan-lantiq
+$(call Package/asterisk18-mod/Default)
+  TITLE:=Lantiq TAPI support
+  DEPENDS:= asterisk18-mod $(LTQ_TAPI_DEPENDS)
+  URL:=http://git.nanl.de/?p=asterisk_channel_lantiq.git
+  MAINTAINER:=Mirko Vogt <mirko@openwrt.org>
+endef
+
+define Package/asterisk18-mod-chan-lantiq/description
+$(call Package/asterisk18-mod/Default/description)
+ This package provides the channel chan_lantiq support to Asterisk.
+endef
+
+CONFIGURE_ARGS+= \
+	--without-inotify
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-app-meetme),)
+  CONFIGURE_ARGS+= \
+	--with-dahdi="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-dahdi
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-gtalk),)
+  CONFIGURE_ARGS+= \
+	--with-gnutls="$(STAGING_DIR)/usr" \
+	--with-iksemel="$(STAGING_DIR)/usr"
+  SITE_VARS+= \
+	ac_cv_lib_iksemel_iks_start_sasl=yes \
+	ac_cv_lib_gnutls_gnutls_bye=yes
+else
+  CONFIGURE_ARGS+= \
+	--without-gnutls \
+	--without-iksemel
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-curl),)
+  CONFIGURE_ARGS+= \
+	--with-curl="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-curl
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-mysql),)
+  CONFIGURE_ARGS+= \
+	--with-mysqlclient="$(STAGING_DIR)/usr/bin"
+else
+  CONFIGURE_ARGS+= \
+	--without-mysqlclient
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-fax-spandsp),)
+  CONFIGURE_ARGS+= \
+    --with-spandsp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+    --without-spandsp
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-chan-mobile),)
+  CONFIGURE_ARGS+= \
+	--with-bluetooth="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-bluetooth
+endif
+
+ifneq ($(SDK)$(CONFIG_PACKAGE_asterisk18-mod-res-srtp),)
+  CONFIGURE_ARGS+= \
+	--with-srtp="$(STAGING_DIR)/usr"
+else
+  CONFIGURE_ARGS+= \
+	--without-srtp
+endif
+
+ifeq ($(CONFIG_TARGET_IBOARDID),"D301")
+  EXTRA_CFLAGS += -DNTR_SUPPORT
+endif
+
+CONFIGURE_ARGS+= \
+	--without-curses \
+	--with-gsm=internal \
+	--without-cap \
+	--without-gtk \
+	--without-gtk2 \
+	--without-isdnnet \
+	--without-kde \
+	--without-misdn \
+	--without-nbs \
+	--with-ncurses="$(STAGING_DIR)/usr" \
+	--without-netsnmp \
+	--without-newt \
+	--without-odbc \
+	--without-ogg \
+	--without-osptk \
+	--with-popt="$(STAGING_DIR)/usr" \
+	--without-pri \
+	--without-qt \
+	--without-radius \
+	--without-sdl \
+	--without-suppserv \
+	--without-tds \
+	--without-termcap \
+	--without-tinfo \
+	--without-vorbis \
+	--without-vpb \
+	--with-z="$(STAGING_DIR)/usr" \
+	--with-sounds-cache="$(DL_DIR)" \
+	--disable-xmldoc
+
+EXTRA_CFLAGS+= $(TARGET_CPPFLAGS)
+EXTRA_LDFLAGS+= $(TARGET_LDFLAGS)
+
+ifeq ($(CONFIG_DEBUG),y)
+	CONFIGURE_ARGS+= \
+		--enable-dev-mode
+	MENUSELECT_ARGS+= \
+		--enable BETTER_BACKTRACES
+	MENUSELECT_ARGS+= \
+		--enable DEBUG_THREADS
+	MENUSELECT_ARGS+= \
+		--enable DONT_OPTIMIZE
+	MENUSELECT_ARGS+= \
+		--enable MALLOC_DEBUG
+	#MENUSELECT_ARGS+= \
+	#	--disable LOADABLE_MODULES
+	#MENUSELECT_ARGS+= \
+	#	--enable LOW_MEMORY
+	#MENUSELECT_ARGS+= \
+	#	--enable STATIC_BUILD
+
+	DEBUG:=
+	OPTIMIZE:=
+
+	#CONFIGURE_ARGS+= \
+	#	--enable-coverage
+else
+	MENUSELECT_ARGS+= \
+		--enable LOW_MEMORY
+	DEBUG:=
+	OPTIMIZE:=
+endif
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+ifneq ($(CONFIG_TARGET_lantiq),)
+	$(CP) ./src-lantiq/* $(PKG_BUILD_DIR)/
+endif
+endef
+
+define Build/Configure
+	-rm $(PKG_BUILD_DIR)/menuselect.makeopts
+	$(call Build/Configure/Default,,$(SITE_VARS))
+	if test -n "$(MENUSELECT_ARGS)" ; then \
+		$(MAKE) -C "$(PKG_BUILD_DIR)" menuselect.makeopts ; \
+		(cd $(PKG_BUILD_DIR) && ./menuselect/menuselect $(MENUSELECT_ARGS)) ; \
+	fi
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		include/asterisk/version.h \
+		include/asterisk/buildopts.h defaults.h \
+		makeopts.embed_rules
+	ASTCFLAGS="$(EXTRA_CFLAGS)" \
+	ASTLDFLAGS="$(EXTRA_LDFLAGS)" \
+	$(MAKE) -C "$(PKG_BUILD_DIR)" \
+		ASTVARLIBDIR="/usr/lib/asterisk" \
+		ASTDATADIR="/usr/lib/asterisk" \
+		ASTKEYDIR="/usr/lib/asterisk" \
+		ASTDBDIR="/usr/lib/asterisk" \
+		NOISY_BUILD="1" \
+		DEBUG="$(DEBUG)" \
+		OPTIMIZE="$(OPTIMIZE)" \
+		DESTDIR="$(PKG_INSTALL_DIR)" \
+		all install samples
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk/*.h $(1)/usr/include/asterisk-1.8/include/asterisk/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/asterisk.h $(1)/usr/include/asterisk-1.8/include/
+endef
+
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
+define Package/asterisk18-mod/conffiles
+/etc/asterisk/asterisk.conf
+/etc/asterisk/modules.conf
+/etc/asterisk/extensions.conf
+/etc/asterisk/sip.conf
+/etc/asterisk/sip_notify.conf
+/etc/asterisk/features.conf
+/etc/asterisk/indications.conf
+/etc/asterisk/logger.conf
+/etc/asterisk/manager.conf
+/etc/asterisk/rtp.conf
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+else
+define Package/asterisk18-mod/conffiles
+/etc/default/asterisk
+/etc/init.d/asterisk
+endef
+endif
+
+define Package/asterisk18-mod/install
+	$(INSTALL_DIR) $(1)/etc/asterisk/ssl
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
+	for f in asterisk extensions features \
+		indications logger manager modules \
+		sip sip_notify rtp; do \
+		$(CP) $(PKG_INSTALL_DIR)/etc/asterisk/$$$$f.conf $(1)/etc/asterisk/ ; \
+	done
+endif
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	for f in app_dial app_echo app_playback app_macro \
+		chan_sip res_rtp_asterisk res_rtp_multicast \
+		codec_ulaw codec_gsm \
+		format_gsm format_pcm format_wav format_wav_gsm \
+		pbx_config \
+		func_strings func_timeout func_callerid func_logic; do \
+		$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$$$$f.so $(1)/usr/lib/asterisk/modules/ ; \
+	done
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/asterisk $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/default
+	$(INSTALL_DATA)  ./files/asterisk.default $(1)/etc/default/asterisk
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/asterisk.init $(1)/etc/init.d/asterisk
+endef
+
+define Package/asterisk18-mod-sounds/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/* $(1)/usr/lib/asterisk/sounds/
+	rm -f $(1)/usr/lib/asterisk/sounds/vm-*
+	rm -f $(1)/usr/lib/asterisk/sounds/conf-*
+endef
+
+
+define Package/asterisk18-mod-voicemail/conffiles
+/etc/asterisk/voicemail.conf
+endef
+
+define Package/asterisk18-mod-voicemail/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/voicemail.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*voicemail.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_adsi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_smdi.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/vm-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-app-meetme/conffiles
+/etc/asterisk/meetme.conf
+endef
+
+define Package/asterisk18-mod-app-meetme/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/meetme.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_meetme.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/sounds/
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/asterisk/sounds/en/conf-*.gsm $(1)/usr/lib/asterisk/sounds/
+endef
+
+define Package/asterisk18-mod-chan-iax2/conffiles
+/etc/asterisk/iax.conf
+/etc/asterisk/iaxprov.conf
+endef
+
+define Package/asterisk18-mod-cdr/conffiles
+/etc/asterisk/cdr.conf
+/etc/asterisk/cdr_custom.conf
+/etc/asterisk/cdr_manager.conf
+/etc/asterisk/cdr_odbc.conf
+/etc/asterisk/cdr_pgsql.conf
+/etc/asterisk/cdr_tds.conf
+endef
+
+define Package/asterisk18-mod-res-musiconhold/conffiles
+/etc/asterisk/musiconhold.conf
+endef
+
+define Package/asterisk18-mod-chan-iax2/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iax.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/iaxprov.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_iax2.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-cdr/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr*.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/*cdr*.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-musiconhold/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/musiconhold.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_musiconhold.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-voice/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_voice.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-gtalk/conffiles
+/etc/asterisk/gtalk.conf
+/etc/asterisk/jabber.conf
+endef
+
+define Package/asterisk18-mod-chan-gtalk/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/gtalk.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/jabber.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_gtalk.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_jabber.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mobile/conffiles
+/etc/asterisk/chan_mobile.conf
+endef
+
+define Package/asterisk18-mod-chan-mobile/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/chan_mobile.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mobile.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-timerfd/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_timerfd.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-timing-pthread/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_timing_pthread.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax/conffiles
+/etc/asterisk/res_fax.conf
+endef
+
+define Package/asterisk18-mod-res-fax/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_fax.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-fax-spandsp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_fax_spandsp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-mgcp/conffiles
+/etc/asterisk/mgcp.conf
+endef
+
+define Package/asterisk18-mod-chan-mgcp/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/mgcp.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_mgcp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-skinny/conffiles
+/etc/asterisk/skinny.conf
+endef
+
+define Package/asterisk18-mod-chan-skinny/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/skinny.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_skinny.so $(1)/usr/lib/asterisk/modules/
+endef
+
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
+define Package/asterisk18-mod-chan-brcm/conffiles
+/etc/asterisk/brcm.conf
+endef
+endif
+
+define Package/asterisk18-mod-chan-brcm/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+ifneq ($(CONFIG_PACKAGE_voice-client),y)
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/brcm.conf $(1)/etc/asterisk/
+endif
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_brcm.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-curl/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/func_curl.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_curl.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-transfer/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_transfer.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-softhangup/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_softhangup.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-mysql/conffiles
+/etc/asterisk/app_mysql.conf
+/etc/asterisk/res_config_mysql.conf
+/etc/asterisk/cdr_mysql.conf
+endef
+
+define Package/asterisk18-mod-mysql/install
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/app_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/res_config_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/cdr_mysql.conf $(1)/etc/asterisk/
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/cdr_mysql.so $(1)/usr/lib/asterisk/modules/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_config_mysql.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-chan-lantiq/conffiles
+/etc/asterisk/lantiq.conf
+endef
+
+define Package/asterisk18-mod-chan-lantiq/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_DIR) $(1)/etc/asterisk
+	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/etc/asterisk/lantiq.conf $(1)/etc/asterisk/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/chan_lantiq.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-srtp/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_srtp.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-res-stun/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/res_stun_monitor.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Package/asterisk18-mod-app-queue/install
+	$(INSTALL_DIR) $(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/app_queue.so $(1)/usr/lib/asterisk/modules/
+endef
+
+define Buildasterisk18-modModuleTemplate
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))
+  $$(call Package/asterisk18-mod/Default)
+    TITLE:=$(2) support
+    DEPENDS:= asterisk18-mod $(4)
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/description
+  $$(call Package/asterisk18-mod/Default/description)
+    This package provides support $(3) in Asterisk.
+  endef
+
+  define Package/asterisk18-mod-$(subst _,-,$(1))/install
+	$(INSTALL_DIR) $$(1)/usr/lib/asterisk/modules
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/asterisk/modules/$(1).so $$(1)/usr/lib/asterisk/modules/
+  endef
+
+  $$(eval $$(call BuildPackage,asterisk18-mod-$(subst _,-,$(1))))
+endef
+
+$(eval $(call BuildPackage,asterisk18-mod))
+$(eval $(call BuildPackage,asterisk18-mod-voicemail))
+$(eval $(call BuildPackage,asterisk18-mod-sounds))
+$(eval $(call BuildPackage,asterisk18-mod-app-meetme))
+$(eval $(call BuildPackage,asterisk18-mod-app-transfer))
+$(eval $(call BuildPackage,asterisk18-mod-app-softhangup))
+$(eval $(call BuildPackage,asterisk18-mod-chan-iax2))
+$(eval $(call BuildPackage,asterisk18-mod-cdr))
+$(eval $(call BuildPackage,asterisk18-mod-res-musiconhold))
+$(eval $(call BuildPackage,asterisk18-mod-res-voice))
+$(eval $(call BuildPackage,asterisk18-mod-chan-gtalk))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mobile))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax))
+$(eval $(call BuildPackage,asterisk18-mod-res-fax-spandsp))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-timerfd))
+$(eval $(call BuildPackage,asterisk18-mod-res-timing-pthread))
+$(eval $(call BuildPackage,asterisk18-mod-chan-mgcp))
+$(eval $(call BuildPackage,asterisk18-mod-chan-skinny))
+$(eval $(call BuildPackage,asterisk18-mod-chan-brcm))
+$(eval $(call BuildPackage,asterisk18-mod-curl))
+$(eval $(call BuildPackage,asterisk18-mod-mysql))
+$(eval $(call BuildPackage,asterisk18-mod-chan-lantiq))
+$(eval $(call BuildPackage,asterisk18-mod-res-srtp))
+$(eval $(call BuildPackage,asterisk18-mod-res-stun))
+$(eval $(call BuildPackage,asterisk18-mod-app-queue))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_authenticate,Authenticate,support for executing arbitrary authenticate commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanisavail,Channel availability check,support for checking if a channel is available))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_chanspy,Channel listen in,support for listening in on any channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_directed_pickup,Directed call pickup,support for directed call pickup))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_exec,Exec application,support for application execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_minivm,Minimal voicemail system,a voicemail system in small building blocks working together based on the Comedian Mail voicemail system))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_readexten,Extension to variable,a trivial application to read an extension into a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_read,Variable read,a trivial application to read a variable))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sayunixtime,Say Unix time,an application to say Unix time))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_sms,SMS,SMS support (ETSI ES 201 912 protocol 1)))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_stack,Stack applications, stack applications Gosub Return etc., +asterisk18-res-agi))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_system,System exec,support for executing system commands))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_talkdetect,File playback with audio detect,for file playback with audio detect))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_waituntil,Sleep,support sleeping until the given epoch))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_while,While loop,a while loop implementation))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_agent,Agents proxy channel, an implementation of agents proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,chan_local,Local proxy channel, an implementation of local proxy channel))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_alaw,Signed linear to alaw translation,translation between signed linear and alaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ulaw,Signed linear to ulaw translation,translation between signed linear and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_a_mu,Alaw to ulaw translation,translation between alaw and ulaw codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g722,G.722,a high bit rate 48/56/64Kbps ITU standard codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_g726,Signed linear to G.726 translation,translation between signed linear and ITU G.726-32kbps codecs))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_ilbc,iLBC,internet Low Bitrate Codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,codec_gsm,GSM,GSM codec))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g726,G.726,support for headerless G.726 16/24/32/40kbps data format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_g729,G.729,support for raw headerless G729 data))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln,Raw slinear format,support for raw slinear format))
+$(eval $(call Buildasterisk18-modModuleTemplate,format_sln16,Raw slinear 16 format,support for Raw slinear 16 format))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_db,Database interaction,functions for interaction with the database))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_devstate,Blinky lights control,functions for manually controlled blinky lights))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_vmcount,vmcount dialplan,a vmcount dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_extstate,Hinted extension state,retrieving the state of a hinted extension for dialplan control))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_global,Global variable,global variable dialplan functions))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_shell,Shell,support for shell execution))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_ael,Asterisk Extension Logic,support for symbolic Asterisk Extension Logic))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_ael_share,Shareable AEL code,support for shareable AEL code mainly between internal and external modules))
+$(eval $(call Buildasterisk18-modModuleTemplate,pbx_spool,Call Spool,outgoing call spool support))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_agi,Asterisk Gateway Interface,support for the Asterisk Gateway Interface extension))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_crypto,Provide Crypto,Cryptographic Signature capability))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_alarmreceiver,Alarm receiver,Central Station Alarm receiver for Ademco Contact ID))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_setcallerid,Set callerid,support for setting callerid))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_verbose,Verbose logging,Verbose logging application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_channel,Channel info,Channel info dialplan function))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_blacklist,Blacklist on callerid,looking up the callerid number and see if it is blacklisted))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_originate,Originate a call,originating an outbound call and connecting it to a specified extension or application))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_uri,URI encoding and decoding,Encodes and decodes URI-safe strings))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_disa,Direct Inward System Access,Direct Inward System Access))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_senddtmf,Send DTMF digits,Sends arbitrary DTMF digits))
+$(eval $(call Buildasterisk18-modModuleTemplate,func_cut,CUT function,CUT function))
+$(eval $(call Buildasterisk18-modModuleTemplate,res_clioriginate,Calls via CLI,Originate calls via the CLI))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_mixmonitor,Record a call and mix the audio,record a call and mix the audio during the recording))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_playtones,Playtones application,play a tone list))
+$(eval $(call Buildasterisk18-modModuleTemplate,app_record,Record sound file,to record a sound file))

asterisk-1.8.x-mod/files/asterisk.default

@@ -0,0 +1,4 @@
+## startup options for /etc/init.d/asterisk
+
+ENABLE_ASTERISK="yes"
+OPTIONS=""

asterisk-1.8.x-mod/files/asterisk.init

@@ -0,0 +1,57 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+STOP=10
+
+USE_PROCD=1
+NAME=asterisk
+PROG=/usr/sbin/asterisk
+DEFAULT=/etc/default/asterisk
+
+init_asterisk() {
+	# do not start asterisk until the
+	# router receives a default route
+	while ! ip r | grep -q default; do
+		sleep 1
+	done
+
+	[ -f $DEFAULT ] && . $DEFAULT
+	[ -d /var/run/asterisk ] || mkdir -p /var/run/asterisk
+	[ -d /var/log/asterisk ] || mkdir -p /var/log/asterisk
+        [ -d /var/spool/asterisk ] || mkdir -p /var/spool/asterisk
+
+        # does the board have a fxs relay?
+        local fxsRelayGpio=$(db -q get hw.board.fxsRelayGpio)
+        if [ "$fxsRelayGpio" != "" ]; then
+                /sbin/brcm_fw_tool set -x $fxsRelayGpio -p 1
+        fi
+}
+
+service_triggers() {
+        procd_add_reload_trigger voice_client
+}
+
+start_service() {
+	init_asterisk
+
+	procd_open_instance
+	procd_set_param command "$PROG" -f
+	procd_set_param respawn
+	procd_close_instance
+#	service_start /usr/sbin/asterisk
+}
+
+reload_service() {
+	asterisk -rx "core reload"
+	asterisk -rx "dialplan reload"
+	asterisk -rx "brcm reload"
+}
+
+restart() {
+	reload
+}
+
+stop_service() {
+        service_stop /usr/sbin/asterisk
+}
+

ated/Makefile

@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -1,62 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bashdb
-PKG_VERSION:=4.4-0.92
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-#PKG_SOURCE_URL:=http://sourceforge.net/projects/bashdb/files/bashdb/$(PKG_VERSION)
-PKG_SOURCE_URL:=@SF/bashdb/
-PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
-#PKG_CAT:=zcat
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Bash script debugging utility.
-  URL:=http://sourceforge.net/projects/bashdb/
-endef
-
-define Package/$(PKG_NAME)/description
-  Bash script debugging utility.
-endef
-
-define Build/Compile
-        $(MAKE) -C $(PKG_BUILD_DIR) \
-                $(TARGET_CONFIGURE_OPTS) \
-                CFLAGS="$(TARGET_CFLAGS) -DLINUX $(TARGET_CPPFLAGS) \
-                        -I./src" \
-                LIBS="$(TARGET_LDFLAGS)" \
-                DESTDIR="$(PKG_INSTALL_DIR)"
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bashdb $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/share
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.sh  $(1)/usr/share/$(PKG_NAME)/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.inc  $(1)/usr/share/$(PKG_NAME)/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/init
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/init/*.sh  $(1)/usr/share/$(PKG_NAME)/init/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/show_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/set_sub
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/command/info_sub
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/*.sh $(1)/usr/share/$(PKG_NAME)/command/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/show_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/show_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/set_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/set_sub/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/command/info_sub/*.sh $(1)/usr/share/$(PKG_NAME)/command/info_sub/
-
-	$(INSTALL_DIR) $(1)/usr/share/$(PKG_NAME)/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/lib/*.sh $(1)/usr/share/$(PKG_NAME)/lib/
-endef
-
-$(eval $(call BuildPackage,bashdb))

bluez/Makefile

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2006-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bluez
+PKG_VERSION:=5.28
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=http://www.kernel.org/pub/linux/bluetooth
+PKG_MD5SUM:=bc20a8285530758c68f6a60e4ca62a15
+
+PKG_FIXUP:=autoreconf
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/bluez
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libpthread +libusb-compat +glib2 +dbus +libreadline $(INTL_DEPENDS) $(ICONV_DEPENDS) 
+  TITLE:=Bluetooth stack new version 
+  URL:=http://www.bluez.org/
+endef
+
+define Package/bluez/conffiles
+/etc/config/bluetooth
+endef
+
+TARGET_LDFLAGS+= \
+                -Wl,-rpath-link=$(STAGING_DIR)/usr/lib/libiconv-full/lib \
+
+CONFIGURE_ARGS += \
+		--enable-shared \
+		--disable-cups \
+		--enable-debug \
+		--disable-test \
+		--disable-obex \
+		--disable-systemd \
+		--disable-udev \
+		--enable-tools \
+		--enable-experimental \
+		--enable-library \
+		--disable-static \
+
+define Build/Compile
+    $(MAKE) -C $(PKG_BUILD_DIR) \
+        LDFLAGS="$(TARGET_LDFLAGS) \
+            -L$(ICONV_PREFIX)/lib \
+            -L$(INTL_PREFIX)/lib -lm -lncurses" \
+        DESTDIR="$(PKG_INSTALL_DIR)" \
+        all install
+endef
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/bluetooth/*.h $(1)/usr/include/bluetooth
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbluetooth.* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/bluez.pc $(1)/usr/lib/pkgconfig/
+endef
+define Package/bluez/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_INSTALL_DIR)/usr/bin/* $(1)/usr/bin/
+
+	$(INSTALL_DIR) $(1)/etc/bluetooth
+	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
+	$(CP)  $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/bluetooth.conf $(1)/etc/dbus-1/system.d/
+
+	$(INSTALL_DIR) $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/bluetooth/* $(1)/usr/lib/bluetooth
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libblue* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,bluez))

bootchart2/Makefile

@@ -1,43 +0,0 @@
-# 
-# Copyright (C) 2007-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bootchart2
-PKG_VERSION:=0.14.7
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/mmeeks/bootchart.git
-PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bootchart2
- SECTION:=base
- CATEGORY:=Utilities
- TITLE:=Bootchart2
- URL:=https://github.com/mmeeks/bootchart
-endef
-
-define Package/bootchart2/description
- Bootchart is a tool for performance analysis and visualization of the GNU/Linux boot process. 
-endef
-
-define Package/bootchart2/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bootchart-collector $(1)/sbin
-	$(CP) ./files/* $(1)/
-endef
-
-
-
-
-$(eval $(call BuildPackage,bootchart2))

bootchart2/files/lib/preinit/11_bootchart

@@ -1,10 +0,0 @@
-
-do_bootchart()
-{
-	[ -f /dev/null ] || mknod /dev/null c 1 3
-	mkdir -p /lib/bootchart/tmpfs
-	echo "starting bootchart"
-	/sbin/bootchart_run_preinit boot &
-}
-
-boot_hook_add preinit_essential do_bootchart

bootchart2/files/lib/preinit/72_bootchart

@@ -1,7 +0,0 @@
-
-bootchart_rootfs_pivot()
-{
-	mount -o move /rom/lib/bootchart/tmpfs /lib/bootchart/tmpfs	
-}
-
-boot_hook_add preinit_mount_root bootchart_rootfs_pivot

bootchart2/files/sbin/bootchart_run_preinit

@@ -1,59 +0,0 @@
- #! /bin/sh
-# this is intended to be started in preinit.
-# 11_bootchart, starts it
-# 72_bootchart, fixup mount point after pivot 
-#
-# program can be killed early with
-# bootchart_run_preinit stop
-
-trap "stop; exit 0;" SIGINT SIGTERM 
-
-STOP_AFTER=250
-HZ=50
-
-if [ -z "$1" ]
-then
-	echo "you need to specify start or stop"
-	exit 1
-fi
-
-start()
-{
-	/sbin/bootchart-collector $HZ &
-}
-
-stop()
-{
-	echo "bootchart DUMP"
-	
-	mkdir /tmp/bootchart
-	/sbin/bootchart-collector --dump /tmp/bootchart
-	cd /tmp/bootchart
-	tar -zcf /tmp/bootchart.tgz header *.log
-	cd /
-	rm -rf /tmp/bootchart
-}
-
-case $1 in
-    boot) # secret option for preinit
-	start
-	sleep $STOP_AFTER
-	# test to see if someone has manually killed us
-	if [ -f /tmp/bootchart.tgz ]
-	then
-	    exit 0
-	fi
-	stop
-	;;
-    start)
-	start
-	;;
-    stop)
-	stop
-	;;
-    *)
-	echo "you need to specify start or stop, not $1"
-	exit 1
-	;;
-esac
-

bootchart2/patches/0001-add_spu_sys_time.patch

@@ -1,40 +0,0 @@
-diff --git a/pybootchartgui/draw.py b/pybootchartgui/draw.py
-index 7c3f60c..5c9f046 100644
---- a/pybootchartgui/draw.py
-+++ b/pybootchartgui/draw.py
-@@ -63,6 +63,7 @@ AXIS_FONT_SIZE = 11
- LEGEND_FONT_SIZE = 12
- 
- # CPU load chart color.
-+CPU_SYS_COLOR = (0.65, 0.13, 0.36, 1.0)
- CPU_COLOR = (0.40, 0.55, 0.70, 1.0)
- # IO wait chart color.
- IO_COLOR = (0.76, 0.48, 0.48, 0.5)
-@@ -300,21 +301,19 @@ def render_charts(ctx, options, clip, trace, curr_y, w, h, sec_w):
- 	# render bar legend
- 	ctx.set_font_size(LEGEND_FONT_SIZE)
- 
--	draw_legend_box(ctx, "CPU (user+sys)", CPU_COLOR, off_x, curr_y+20, leg_s)
--	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "CPU (user)", CPU_COLOR, off_x, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "CPU (sys)", CPU_SYS_COLOR, off_x + 120, curr_y+20, leg_s)
-+	draw_legend_box(ctx, "I/O (wait)", IO_COLOR, off_x + 120 + 120 , curr_y+20, leg_s)
- 
- 	# render I/O wait
- 	chart_rect = (off_x, curr_y+30, w, bar_h)
- 	if clip_visible (clip, chart_rect):
- 		draw_box_ticks (ctx, chart_rect, sec_w)
- 		draw_annotations (ctx, proc_tree, trace.times, chart_rect)
--		draw_chart (ctx, IO_COLOR, True, chart_rect, \
--			    [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], \
--			    proc_tree, None)
-+		draw_chart (ctx, IO_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys + sample.io) for sample in trace.cpu_stats], proc_tree, None)
- 		# render CPU load
--		draw_chart (ctx, CPU_COLOR, True, chart_rect, \
--			    [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], \
--			    proc_tree, None)
-+		draw_chart (ctx, CPU_SYS_COLOR, True, chart_rect, [(sample.time, sample.user + sample.sys) for sample in trace.cpu_stats], proc_tree, None)
-+		draw_chart (ctx, CPU_COLOR, True, chart_rect, [(sample.time, sample.user ) for sample in trace.cpu_stats], proc_tree, None)
- 
- 	curr_y = curr_y + 30 + bar_h
- 

btle_alarm/Makefile

@@ -0,0 +1,47 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=btle_alarm
+PKG_VERSION:=1.0.6
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=b505d7ae1524a213ca3de7f8ee15a7d51c6bbbd5
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/btle_alarm
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/btle_alarm
+  SECTION:=base
+  CATEGORY:=Utilities
+  TITLE:=Ethernet bridging configuration utility
+  #DESCRIPTION:=This variable is obsolete. use the Package/name/description define instead!
+  URL:=http://btle_alarm.sourceforge.net/
+  DEPENDS:=+bluez +libncurses
+endef
+
+define Package/btle_alarm/description
+ Ethernet bridging configuration utility
+ Manage ethernet bridging; a way to connect networks together to
+ form a larger network.
+endef
+
+define Package/btle_alarm/install
+
+	$(CP) ./files/* $(1)/
+
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/btle_alarm $(1)/sbin/
+
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DATA) ./files/btle_alarm.conf $(1)/etc/config/btle_alarm
+
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN)  ./files/etc/init.d/* $(1)/etc/init.d/
+
+endef
+
+$(eval $(call BuildPackage,btle_alarm))

btle_alarm/files/btle_alarm.conf

@@ -0,0 +1,2 @@
+config info 'Device'
+        option mac 'D0:39:72:B6:23:D6'

btle_alarm/files/etc/init.d/btle_alarm

@@ -0,0 +1,29 @@
+#!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+
+START=99
+
+start() {
+        for i in down reset up;do
+            hciconfig hci0 $i
+        done
+        mac=`uci get btle_alarm.Device.mac`
+        if [ $? -eq 0 ];then
+            hcitool lewladd $mac
+        else
+            hcitool lewladd D0:39:72:B6:43:8A
+            hcitool lewladd D0:39:72:B6:18:AA
+        fi
+       sleep 1
+        /sbin/btle_alarm &> /dev/null &
+        echo $! > /tmp/btle_alarm.pid
+}
+
+stop() {
+        hciconfig hci0 down
+        kill -9 `cat /tmp/btle_alarm.pid`
+        rm /tmp/btle_alarm.pid
+        sleep 1
+}

catv/files/etc/init.d/catv

@@ -10,16 +10,12 @@ USE_PROCD=1
 
 start_service() {
 	local enable=0
-	local filter=0
+        local filter=0
 
-	config_load catv
-	config_get_bool enable catv enable 0
-	config_get filter catv filter
-	if [ $enable -eq 0 ]; then
-		ubus call catv set-enable "{\"enable\":\"off\"}"
-	else
-		ubus call catv set-enable "{\"enable\":\"on\"}"
-	fi
+        config_load catv
+        config_get enable catv enable
+        config_get filter catv filter
+	ubus call catv set-enable "{\"enable\":\"$enable\"}"
 	ubus call catv set-filter "{\"filter\":\"$filter\"}"
 
 }

dectmngr/Makefile

@@ -0,0 +1,66 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.0.24
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=6ba403663bc9cfdb8f89fb34de367f0796d68552
+PKG_NAME:=dectmngr
+
+
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint test application
+  URL:=
+  DEPENDS:= +libevent2 +libjson +natalie-dect-h bcmkernel
+endef
+
+define Package/dectmngr/description
+	Dect proxy, manager and tools
+endef
+
+
+define Package/dectmngr/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/dect
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+
+	cp $(PKG_BUILD_DIR)/dectmngr $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/atohx $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectproxy $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectdbgd $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dectcalib $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/dect_testmode $(1)/usr/bin/
+	cp files/etc/init.d/* $(1)/etc/init.d/
+	cp files/etc/hotplug.d/dect/* $(1)/etc/hotplug.d/dect/
+	cp files/etc/dect/* $(1)/etc/dect/
+	cp files/etc/config/* $(1)/etc/config/
+	cp files/sbin/dectreg $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dectmngr))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'dect'
+	option 'radio' 'auto'
+

dectmngr/files/etc/hotplug.d/dect/00-dectstate

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+if [ "$ACTION" == "led_blink" ]; then
+    ubus call led.dect set '{"state":"notice"}'
+fi
+
+if [ "$ACTION" == "led_on" ]; then
+    ubus call led.dect set '{"state":"ok"}'
+fi
+
+if [ "$ACTION" == "led_off" ]; then
+    ubus call led.dect set '{"state":"off"}'
+fi
+
+

dectmngr/files/etc/init.d/dect

@@ -0,0 +1,60 @@
+#!/bin/sh /etc/rc.common
+
+START=97
+STOP=10
+USE_PROCD=1
+
+DEST=
+DEFAULT=
+OPTIONS=""
+
+
+start_service() {
+	# avoid fp timing problem
+	echo 1 > /proc/sys/kernel/printk_with_interrupt_enabled
+	
+	# setup board specific dect parameters
+	cat /proc/nvram/rfpi | tr -d ' ' | atohx > /tmp/rfpi
+	cat /proc/nvram/fixed_emc | tr -d ' ' | atohx > /tmp/fixed_emc
+	cat /proc/nvram/bcm_def_freq | tr -d ' ' | atohx > /tmp/bcm_def_freq
+	DECTANTDIV=`db get hw.board.DectAntennaDiversity`
+	case "$DECTANTDIV" in
+		1|off) echo -ne "\x01" > /tmp/dect_antenna_diversity ;;
+		2) echo -ne "\x02" > /tmp/dect_antenna_diversity ;;
+		*) echo -ne "\x00" > /tmp/dect_antenna_diversity ;;
+	esac
+
+	if [ ! -f /etc/dect/nvs ]; then
+		cp /etc/dect/nvs_default /etc/dect/nvs
+		dd of=/etc/dect/nvs if=/tmp/rfpi conv=notrunc bs=1 seek=0
+		dd of=/etc/dect/nvs if=/tmp/fixed_emc conv=notrunc bs=1 seek=10
+		dd of=/etc/dect/nvs if=/tmp/bcm_def_freq conv=notrunc bs=1 seek=6
+		dd of=/etc/dect/nvs if=/tmp/dect_antenna_diversity conv=notrunc bs=1 seek=32
+		fsync /etc/dect/nvs
+	fi
+	
+	# init dectproxy
+	dectproxy > /dev/null 2>&1 &
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+stop_service() {
+        killall -9 dectproxy
+	killall -9 dectmngr
+}
+
+restart_service() {
+	echo "restarting dect"
+	killall dectmngr
+	dectmngr > /tmp/dectmngr 2>&1 &
+}
+
+reload_service() {
+	# reload config
+	dect -c
+}
+
+service_triggers() {
+        procd_add_reload_trigger dect
+}
+

dectmngr/files/sbin/dectreg

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# This script is likely not used. Just exit with
+# an error and see if someone screems... If not,
+# we can delete this file.
+exit 1
+
+
+[ -f /var/dectisregistering ] || {
+	touch /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -r
+	ubus call led.dect  set '{"state" : "notice"}'
+	sleep 20
+	rm /var/dectisregistering 2>/dev/null
+	/usr/bin/dectmngr -s
+	ubus call led.dect  set '{"state" : "ok"}'
+}

dectmngr2/Makefile

@@ -8,20 +8,23 @@
 include $(TOPDIR)/rules.mk
 
 PKG_RELEASE:=1
-PKG_VERSION:=1.2.0
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_VERSION:=1.1.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=0c029ed2486342e7e7687631b702d5c743f3c41a
+PKG_SOURCE_VERSION:=a51f8ed1b9178262777f73f7c275d3962f829c8a
 PKG_NAME:=dectmngr2
 
 
+LDFLAGS+= \
+        -Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
 RSTRIP:=true
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -29,7 +32,7 @@ define Package/dectmngr2
   CATEGORY:=Utilities
   TITLE:=Dectmngr2
   URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
 endef
 
 define Package/dectmngr2/description
@@ -38,19 +41,11 @@ endef
 
 
 define Package/dectmngr2/install
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
-	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	cp $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/bin/
+	cp $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

easy-soc-libs/Config.in

@@ -1,19 +0,0 @@
-if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
-menu "configurations"
-
-config IOP_LLA_LIBS_DEBUG
-	bool "Enable debugging support"
-	default n
-
-config LIBWIFI_DEBUG
-	depends on PACKAGE_libwifi
-	bool "Enable wifi debugging"
-	default n
-
-config LIBDSL_DEBUG
-	depends on PACKAGE_libdsl
-	bool "Enable xdsl debugging"
-	default n
-
-endmenu
-endif

easy-soc-libs/Makefile

@@ -1,133 +0,0 @@
-#
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7f884592aa42cc627542589d5b77cf4a50567536
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS easy SoC libraries
-  SUBMENU:=IOPSYS easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-define Package/libwifi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-endef
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-endef
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS:=+TARGET_iopsys_ramips:swconfig
-endef
-
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-  KERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCONFIG_BCM963138
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
-  TARGET_PLATFORM=LANTIQ
-  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
-else
-  $(info (UNEXPECTED CONFIG TARGET))
-endif
-
-ifdef CONFIG_IOP_LLA_LIBS_DEBUG
-  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	subdirs="$(subdirs)"
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-
-define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi.so* $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libwifi))
-$(eval $(call BuildPackage,libdsl))
-$(eval $(call BuildPackage,libethernet))

endptcfg/Makefile

@@ -0,0 +1,90 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=endptcfg
+PKG_VERSION:=0.2
+
+PKG_SOURCE_VERSION:=1194b05278bd0945ca5c76436e56617b86871a65
+ifeq ($(CONFIG_BCM_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptcfg-open
+else
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=git@private.inteno.se:endptcfg
+PKG_SOURCE_PROTO:=git
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+LDFLAGS+= \
+		-Wl,-rpath-link=$(STAGING_DIR)/usr/lib \
+		-Wl,-rpath-link=$(STAGING_DIR)/lib
+
+BCMKERNEL_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx
+export BCMKERNEL_DIR
+
+TARGET_LDFLAGS += $(BCMKERNEL_DIR)/userspace/private/apps/vodsl/telephonyProfiles/telephonyProfiles.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/voip/util/log/vodslLog.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/endpoint/endpoint_user.o \
+			$(BCMKERNEL_DIR)/userspace/private/apps/vodsl/bos/bos.o \
+			-lpthread
+
+ifeq ($(CONFIG_BRCM_SDK_VER_416040),y)
+TARGET_CFLAGS += -DFAKE_SSP
+endif
+
+RSTRIP:=true
+export BUILD_DIR
+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/endptcfg
+  CATEGORY:=Utilities
+  TITLE:=Broadcom endpoint driver configuration application
+  URL:=
+  DEPENDS:=+libpthread bcmkernel
+endef
+
+define Package/endptcfg/description
+	Broadcom endpoint driver configuration application
+endef
+
+ifneq ($(CONFIG_BCM_OPEN),y)
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		$(TARGET_CONFIGURE_OPTS) LINUX_DIR=$(LINUX_DIR) LDFLAGS="$(TARGET_LDFLAGS)" CFLAGS="$(TARGET_CFLAGS) \
+			-I$(LINUX_DIR)/include \
+			-I$(STAGING_DIR)/usr/include \
+			-DRS_ENDIAN_TYPE=RS_BIG_ENDIAN \
+			-DBOS_OS_LINUXUSER -DBOS_CFG_TIME \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/broadcom/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/endpt/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/codec \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/publicInc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/voice_res_gw/casCtl/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_drivers/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/private/apps/vodsl/voip/inc \
+			-I$(STAGING_DIR)/usr/include/bcm963xx/xChange/dslx_common/xchg_common/bos/LinuxUser"
+endef
+else
+define Build/Compile
+endef
+endif
+
+define Package/endptcfg/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	cp $(PKG_BUILD_DIR)/endptcfg $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,endptcfg))

endptmngr/Config.in

@@ -1,4 +0,0 @@
-
-config ENDPT_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

endptmngr/Makefile

@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=a78fe95d5c5a0a320f3b62b9d2faafd07b56e3a7
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_NAME:=endptmngr
-endif
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/endptmngr/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/endptmngr
-  CATEGORY:=Utilities
-  TITLE:=Brcmslic
-  URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
-endef
-
-define Package/endptmngr/description
-	endptmngr
-endef
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
-endef
-
-endif
-
-
-define Package/endptmngr/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,endptmngr))

fatrace/Makefile

@@ -1,58 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=fatrace
-PKG_VERSION:=0.12
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=98af6019a4a1b478a6fa35f74528cb3cd404ae40
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://git.launchpad.net/fatrace
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-PKG_CONFIG_DEPENDS := CONFIG_KERNEL_FANOTIFY
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fatrace
-	CATEGORY:=Utilities
-	TITLE:=Report system wide file access events
-	URL:=
-	DEPENDS	:= +@KERNEL_FANOTIFY
-endef
-
-define Package/fatrace/description
-	Report system wide file access events.
-endef
-
-MAKE_INSTALL_FLAGS += PREFIX="/" 
-
-define Package/fatrace/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/sbin/fatrace $(1)/sbin/
-#	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,fatrace))
-
-

fatrace/patches/001-fix-O_LARGEFILE.patch

@@ -1,14 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index 1c0899a..b7d1560 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -44,7 +44,8 @@
-  * http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=1e2ee49f7
-  * O_LARGEFILE is usually 0, so hardcode it here
-  */
--#define KERNEL_O_LARGEFILE 00100000
-+//#define KERNEL_O_LARGEFILE 00100000
-+#define KERNEL_O_LARGEFILE O_LARGEFILE
- 
- /* command line options */
- static char* option_output = NULL;

fatrace/patches/002-fflush.patch

@@ -1,12 +0,0 @@
-diff --git a/fatrace.c b/fatrace.c
-index b7d1560..6179272 100644
---- a/fatrace.c
-+++ b/fatrace.c
-@@ -149,6 +149,7 @@ print_event(const struct fanotify_event_metadata *data,
-         printf ("%li.%06li ", event_time->tv_sec, event_time->tv_usec);
-     }
-     printf ("%s(%i): %s %s\n", procname, data->pid, mask2str (data->mask), pathname);
-+    fflush(stdout);
- }
- 
- /**

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -1,3 +0,0 @@
-
-git-src
-

gigaset-elements/Makefile

@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@dev.iopsys.eu:3rdparty/gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-

ice-client/Config.in

@@ -1,4 +0,0 @@
-
-config ICE_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

ice-client/Makefile

@@ -5,10 +5,6 @@ PKG_NAME:=ice-client
 
 CFMODULES:=$(filter CONFIG_PACKAGE_$(PKG_NAME)-%,$(.VARIABLES))
 CFMODULES:=$(subst CONFIG_PACKAGE_$(PKG_NAME)-,,$(CFMODULES))
-
-#CFMODULES:=$(CFMODULES) webaccess texec iperf
-#CFMODULES:=$(sort $(CFMODULES))
-
 $(info Building package: $(PKG_NAME))
 $(info Building with additional modules: $(CFMODULES))
 export CFMODULES
@@ -19,34 +15,32 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.3.1
-PKG_RELEASE:=
+BASE_PKG_VERSION:=3.4.1
+PKG_RELEASE:=RC8
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=1e30a043e49669a0d0f8e656346fa52b09df10b4
-ifeq ($(CONFIG_ICE_OPEN),y)
-TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
+PKG_SOURCE_VERSION:=ecad8b60183b43ecf86543c0c29db46cda8aae29
+ifeq ($(CONFIG_BCM_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=$(PKG_NAME)-$(BRCM_KERNEL_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_SOURCE:=$(PKG_NAME)-$(TARGET_PROFILE)-$(BASE_PKG_VERSION)$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-SKIPHASH=1
-export SKIPHASH
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+#PKG_NAME:=ice-client-open
 else
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@private.inteno.se:ice-client.git
-PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=ssh://git@private.inteno.se/ice-client.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(BASE_PKG_VERSION)-$(PKG_RELEASE).tar.gz
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 endif
 
 
 ###########################--RELEASE--################################
 
-#include $(INCLUDE_DIR)/uclibc++.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/ice-client/Default
@@ -59,11 +53,8 @@ define Package/ice-client
 $(call Package/ice-client/Default)
 	TITLE:=ice-client
 	MENU:=1
-	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox +libpthread
-endef
-
-define Package/ice-client/config
-	source "$(SOURCE)/Config.in"
+	DEPENDS:=+libopenssl +libstdcpp +libubus +ubus +ubusd +jshn +libubox
+	DEFAULT:=y
 endef
 
 ###########################--DEVELOPMENT--################################
@@ -79,7 +70,7 @@ endef
 # PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)-$(BASE_PKG_VERSION)
 # 
 #
-# These settings allow you to specify a source folder where your source code is located
+# These settings allow you to specify a soruce folder where your source code is located
 # This avoids having to tar-zip or fetch from git each time
 # Changes can be done in your sources while the build is performed somewhere else
 # If you forget some settings, your source folder will be deleted!!! So be carefull and 
@@ -88,6 +79,7 @@ endef
 #define Build/Prepare
 #	rm -rf $(PKG_BUILD_DIR)
 #	ln -s /home/erik/Desktop/ice-client $(PKG_BUILD_DIR)
+##	ln -s /home/erik/Desktop/checkCompilation/iopsys-client $(PKG_BUILD_DIR)
 #endef
 
 ###########################--DEVELOPMENT--################################
@@ -102,7 +94,7 @@ endef
 # command to copy the binary file from its current location (in our case the build
 # directory) to the install directory.
 
-ifeq ($(CONFIG_ICE_OPEN),y)
+ifeq ($(CONFIG_BCM_OPEN),y)
 define Build/Compile
 endef
 else
@@ -130,14 +122,14 @@ fi
 exit 0
 endef
 
-ifeq ($(CONFIG_ICE_OPEN),y)
+ifeq ($(CONFIG_BCM_OPEN),y)
 define Package/ice-client/install
-	#$(INSTALL_DIR) $(1)/bin
-	#$(INSTALL_DIR) $(1)/etc
-	#$(INSTALL_DIR) $(1)/usr
-	#$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
-	#$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
-	#$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
+	$(INSTALL_DIR) $(1)/bin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/usr
+	$(CP) $(PKG_BUILD_DIR)/bin/* $(1)/bin/
+	$(CP) $(PKG_BUILD_DIR)/etc/* $(1)/etc/
+	$(CP) $(PKG_BUILD_DIR)/usr/* $(1)/usr/
 endef
 else
 define Package/ice-client/install
@@ -145,7 +137,7 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/core/ice $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/modules/system/ubusevent/obj/iopsys/ubusevent $(1)/bin
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1,texecService.so.1.0.1,webaccessService.so.1.0.1} $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/core/lib/{systemService.so.1.0.1,libconfStore.so.1,networkService.so.1.0.1,packageService.so.1.0.1,monitorService.so.1.0.1,iperfService.so.1.0.1,logService.so.1.0.1} $(1)/usr/lib
 	$(CP) $(PKG_BUILD_DIR)/lib/wsice/obj/iopsys/libwsice.so $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/execute
 	$(INSTALL_DIR) $(1)/bin/ifs/iperf/progress
@@ -155,15 +147,12 @@ define Package/ice-client/install
 	$(CP) $(PKG_BUILD_DIR)/scripts/etc/config/ice $(1)/etc/config
 	$(INSTALL_DIR) $(1)/etc/iopsys
 	$(CP) $(PKG_BUILD_DIR)/scripts/server.ini $(1)/etc/iopsys	
-	$(CP) $(PKG_BUILD_DIR)/scripts/defaults.ini $(1)/etc/iopsys	
 	$(CP) $(PKG_BUILD_DIR)/scripts/modify.ini $(1)/etc/iopsys
 	$(INSTALL_DIR) $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/cert_server_ca.pem $(1)/etc/iopsys/certificates
 	$(CP) $(PKG_BUILD_DIR)/scripts/inteno_root_ca.pem $(1)/etc/iopsys/certificates
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/scripts/ice-client $(1)/etc/init.d/ice-client
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
-	$(CP) ./files/ice-client.uci_default $(1)/etc/uci-defaults/95-ice-client
 endef
 endif
 
@@ -174,14 +163,14 @@ cp /tmp/iopsysserver.ini /etc/iopsys/server.ini
 rm -f /tmp/iopsysserver.ini 
 cp /tmp/ice.back /etc/config/ice 
 rm -f /tmp/ice.back
-if [ -f "/etc/rc.d/S98ice-client" ]; then
-	/etc/init.d/ice-client restart
+if [ -f "/etc/rc.d/S99ice-client" ]; then
+	/etc/init.d/ice-client start
 fi
 exit 0
 endef
 
 # Additional modules
-ifneq ($(CONFIG_ICE_OPEN),y)
+ifneq ($(CONFIG_BCM_OPEN),y)
 # Camerawatch
 define Package/ice-client-camerawatch
 $(call Package/ice-client/Default)
@@ -494,7 +483,7 @@ endef
 define Package/ice-client-fileme
   $(call Package/ice-client/Default)
   TITLE:=FileMe
-  DEPENDS+= +lighttpd +lighttpd-mod-webdav +lighttpd-mod-setenv +lighttpd-mod-userdir +samba2-client +samba2-common +libpcre +libltdl +libxml2
+  DEPENDS+= +lighttpd +samba2-client
 endef
 
 define Package/ice-client-fileme/description
@@ -895,103 +884,6 @@ fi
 exit 0
 endef
 
-# texec
-define Package/ice-client-texec
-  $(call Package/ice-client/Default)
-  TITLE:=texec
-  DEPENDS+= 
-endef
-
-define Package/ice-client-texec/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-texec/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-texec/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=tExecMgr" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-texec/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/texecService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-texec/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=texecService.so.1.0.1" package="ice-client-texec" > /tmp/cfin
-fi
-exit 0
-endef
-
-# webaccess
-define Package/ice-client-webaccess
-  $(call Package/ice-client/Default)
-  TITLE:=webaccess
-  DEPENDS+= 
-endef
-
-define Package/ice-client-webaccess/description
-remote script execution module for ice-client
-endef
-
-define Package/ice-client-webaccess/prerm
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/preinst
-#!/bin/sh
-if [ ! -f "/tmp/ice.pid" ] ; then exit 0 ; fi
-PROC_ID=$$(cat /tmp/ice.pid)
-PROC_EXISTS=$$(/usr/bin/pgrep -P $${PROC_ID})
-if [ -n "$$PROC_EXISTS" ]; then
-  read -t 1 <>/tmp/cfout
-  echo "system moduleRemove topic=webAccess" > /tmp/cfin
-fi
-exit 0
-endef
-
-define Package/ice-client-webaccess/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/core/lib/webaccessService.so.1.0.1 $(1)/usr/lib
-endef
-
-define Package/ice-client-webaccess/postinst
-#!/bin/sh
-read -t 1 <>/tmp/cfout
-if [ -f /tmp/ice.pid  ]; then
-	echo "system moduleAdd file=webaccessService.so.1.0.1" package="ice-client-webaccess" > /tmp/cfin
-fi
-exit 0
-endef
 # bmspeedtest
 define Package/ice-client-bcmspeedmgr
   $(call Package/ice-client/Default)
@@ -1006,26 +898,16 @@ endef
 define Package/ice-client-bcmspeedmgr/install
 	$(INSTALL_DIR) $(1)/bin
 	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/bcmspeedmgr $(1)/bin
-	$(CP) $(PKG_BUILD_DIR)/daemons/bcmspeedmgr/obj/iopsys/speedsvc $(1)/bin
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(CP) $(PKG_BUILD_DIR)/platforms/iopsys/bcmspeedtestservice $(1)/etc/init.d/bcmspeedtestservice
 endef
-
-define Package/ice-client-bcmspeedmgr/postinst
-#!/bin/sh
-/etc/init.d/bcmspeedtestservice stop
-/etc/init.d/bcmspeedtestservice start
-exit 0
-endef
-
 endif
-
 # This line executes the necessary commands to compile our program.
 # The above define directives specify all the information needed, but this
 # line calls BuildPackage which in turn actually uses this information to
 # build a package.
 $(eval $(call BuildPackage,ice-client))
-ifneq ($(CONFIG_ICE_OPEN),y)
+ifneq ($(CONFIG_BCM_OPEN),y)
 $(eval $(call BuildPackage,ice-client-guest))
 $(eval $(call BuildPackage,ice-client-camerawatch))
 $(eval $(call BuildPackage,ice-client-openvpn))
@@ -1040,7 +922,5 @@ $(eval $(call BuildPackage,ice-client-rework))
 $(eval $(call BuildPackage,ice-client-sip))
 $(eval $(call BuildPackage,ice-client-monitor))
 $(eval $(call BuildPackage,ice-client-gigaset))
-$(eval $(call BuildPackage,ice-client-texec))
 $(eval $(call BuildPackage,ice-client-bcmspeedmgr))
-$(eval $(call BuildPackage,ice-client-webaccess))
 endif

ice-client/files/ice-client.uci_default

@@ -1,72 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
-}
-
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q del_list passwords.ice._access_w=root
-uci -q add_list passwords.ice._access_w=root
-uci -q commit passwords
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_w 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-
-EOF
-}
-
-uci -q del_list dhcp.@domain[0].name="inteno.lan"
-uci -q add_list dhcp.@domain[0].name="inteno.lan"
-uci -q commit dhcp
-
-exit 0
-

icgroupd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2016 Inteno Broadband AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=icgroupd
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Inteno Broadband AB
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/icgroupd
-  SECTION:=base
-  CATEGORY:=Base system
-  TITLE:=Inteno cgroup daemon
-  DEPENDS:=+uci +busybox
-endef
-
-define Package/icgroupd/description
-	This package contains Intenos cgroup daemon and associated
-	configuration and startup scripts.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/icgroupd/install
-	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
-
-	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
-	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
-	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,icgroupd))
-

icgroupd/files/cgroupd

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-CGBASEDIR=$1
-CGCONFIG=$2
-[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
-
-[ -r /lib/functions.sh ] || exit 1
-. /lib/functions.sh
-
-CGPROCMAP=/tmp/cgprocmap
-CGPERIOD=3s
-
-DBGLOG=/tmp/cgroupd.log
-DEBUG=0
-
-
-add_to_procmap () {
-	local name_grp=$1
-	local name grp
-
-	name=$(echo $name_grp |awk -F= '{print $1}')
-	grp=$(echo $name_grp |awk -F= '{print $2}')
-
-	echo "($name) $grp" >> $CGPROCMAP
-}
-
-# Read configuration file and create process:group look-up table
-# in /tmp file
-read_config () {
-	local enab
-
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && exit 1
-
-	config_get CGDEFGROUP cgroups defgroup "_undef_"
-	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
-	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
-
-	echo -n '' > $CGPROCMAP
-	config_list_foreach procmap procmap add_to_procmap
-	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
-}
-
-# Move all process except init from cgroup root to cgroups according
-# to /tmp look-up table
-move_wild_procs () {
-	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
-	local pid name grp
-
-	for pid in $wild_procs; do
-
-		[ $pid -eq 1 ] && continue
-		if [ -d /proc/$pid ]; then
-
-			name=$(awk '{print $2}' /proc/$pid/stat)
-			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
-
-			[ "$grp" == "." ] && continue
-			[ -n "$grp" ] || grp=$CGDEFGROUP
-
-			[ "$DEBUG" == "1" ] && \
-			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
-			echo $pid > $CGBASEDIR/$grp/cgroup.procs
-		fi
-	done
-}
-
-
-[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-read_config
-while true; do
-	move_wild_procs
-	sleep $CGPERIOD
-done

icgroupd/files/cgroups.config

@@ -1,48 +0,0 @@
-config cgroups cgroups
-	option enabled 1
-	option defgroup iopsys/normal
-
-config cgroup _root_
-#	list option cpu.rt_runtime_us=50000
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=40000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=30000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=2500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=7500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config procmap procmap
-	list procmap kthreadd=.
-	list procmap minidlna=3prt/normal
-

icgroupd/files/cgroups.init

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-USE_PROCD=1
-PROCD_DEBUG=1
-NAME=cgroupd
-
-CGBASEDIR=/sys/fs/cgroup
-CGCONFIG="cgroups"
-
-DBGLOG=/tmp/cginit.log
-DEBUG=0
-
-
-cgroupinit_set_knob_value () {
-	local knob_val=$1
-	local dir=$2
-	local knob val
-
-	knob=$(echo $knob_val |awk -F= '{print $1}')
-	val=$(echo $knob_val |awk -F= '{print $2}')
-	/bin/echo $val > $CGBASEDIR/$dir/$knob
-	[ "$DEBUG" == "1" ] && \
-	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
-}
-
-cgroupinit_create_group () {
-	local cgrp=$1
-	local dir
-
-	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
-	if [ "$cgrp" == "_root_" ]; then
-		dir=.
-	else
-		dir=$(echo $cgrp |tr '_' '/')
-
-		if [ ! -d $CGBASEDIR/$dir ]; then
-			mkdir $CGBASEDIR/$dir
-			[ "$DEBUG" == "1" ] && \
-			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
-		fi
-	fi
-
-	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
-}
-
-cgroupinit_configure_cgroups () {
-	local enab defgrp
-
-	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && return 1
-
-	config_get defgrp cgroups defgroup "_undef_"
-	[ "$defgrp" == "_undef_" ] && return 1
-
-	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
-		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
-		[ $? -eq 0 ] || return 1
-	fi
-
-	config_foreach cgroupinit_create_group cgroup
-	return 0
-}
-
-start_service () {
-	cgroupinit_configure_cgroups
-	[ $? -eq 0 ] || return
-
-	procd_open_instance
-	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service () {
-	local cgdir procs prc
-
-	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
-		procs=$(cat $cgdir/cgroup.procs)
-		for prc in $procs; do
-			echo $prc > $CGBASEDIR/cgroup.procs
-		done
-		rmdir $cgdir
-	done
-}
-
-service_triggers() {
-        procd_add_reload_trigger $CGCONFIG
-}
-

icwmp/Config.in

@@ -19,17 +19,8 @@ config CWMP_DEBUG
 	bool "Compile with debug options"
 	default y
 
-config XMPP_ENABLE
-	bool "enable xmpp feature"
-	default n
-
 config CWMP_DEVEL_DEBUG
 	bool "Compile with development debug options"
 	default n
 
-config LIBDATAMODEL_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_IOPSYS_EU_"
-    
 endif
-

icwmp/Config_datamodel.in

@@ -1,7 +0,0 @@
-if PACKAGE_libdatamodel
-
-config UPNP_TR064
-	bool "Compile with tr064 features"
-	default n
-
-endif

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-01-17
+PKG_VERSION:=3.0-2016-02-24
 PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=88edf3d3c6d6d115425f312e36cbb731cd8fe863
+PKG_SOURCE_VERSION:=476392f44397a10769efdd96005378732b9e915a
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -30,32 +30,11 @@ CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
 
-define Package/libdatamodel
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
-endef
-
-define Package/icwmp_stun
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 stun Client
-	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
-endef
-
-define Package/icwmp_xmpp
-	SECTION:=utils
-	CATEGORY:=Utilities
-	TITLE:=TR-069 xmpp feature
-	DEPENDS:=+libuci +libubox +libexpat +libstrophe
-endef
-
 define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt
 endef
 
 define Package/icwmp/description
@@ -77,11 +56,7 @@ define Package/icwmp-zstream
 endef
 
 define Package/icwmp-zstream/config
-	source "$(SOURCE)/Config_cwmp.in"
-endef
-
-define Package/libdatamodel/config
-	source "$(SOURCE)/Config_datamodel.in"
+	source "$(SOURCE)/Config.in"
 endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
@@ -91,15 +66,9 @@ define Build/Prepare
 endef
 endif
 
-ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_CFLAGS += -DEX400
-endif
-
-TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
-
 TARGET_CFLAGS += \
 	-D_GNU_SOURCE -D_AADJ
-
+	
 ifneq ($(CWMP_REVISION)_,_)
 ifneq ($(CWMP_REVISION),exported)
 ifneq ($(CWMP_REVISION),Unversioned directory)
@@ -116,17 +85,7 @@ CONFIGURE_ARGS += \
 	--with-uci-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
 	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-	
-ifeq ($(CONFIG_UPNP_TR064),y)
-CONFIGURE_ARGS += \
-	--enable-upnptr064
-endif
-	
-ifeq ($(CONFIG_XMPP_ENABLE),y)
-CONFIGURE_ARGS += \
-	--enable-xmpp
-endif
-	
+
 ifeq ($(BUILD_VARIANT),zstream)
 CONFIGURE_ARGS += \
 	--enable-http=zstream \
@@ -158,18 +117,13 @@ CONFIGURE_ARGS += \
 	--enable-devel
 endif
 
-define Package/libdatamodel/install
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
-endef
-
 define Package/icwmp-$(BUILD_VARIANT)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/config
 	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
@@ -181,39 +135,10 @@ ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
 	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/iwepkeygen $(1)/usr/sbin/iwepkeygen
 endif
-	$(CP) ./files/* $(1)/
 endef
 
-define Package/icwmp_stun/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
-endef
-
-define Package/icwmp_xmpp/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
-	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
-	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
-endef
-
-
 define Package/icwmp-$(BUILD_VARIANT)/postinst
 	#!/bin/sh
 	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
@@ -235,7 +160,4 @@ endef
 
 
 $(eval $(call BuildPackage,icwmp-curl))
-$(eval $(call BuildPackage,libdatamodel))
-$(eval $(call BuildPackage,icwmp_stun))
-$(eval $(call BuildPackage,icwmp_xmpp))
 $(eval $(call BuildPackage,icwmp-zstream))

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	local prevopt43url=""
-	local curopt43url=""
-	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
-	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,44 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-set_cwmp_reqopts

ifbt/Makefile

@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ifbt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ifbt
-	CATEGORY:=Utilities
-	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c
-	TITLE:=Fast BSS Transition
-endef
-
-define Package/ifbt/description
-	ifbt is Iopsys application for fast BSS transition
-endef
-
-define Package/ifbt/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ifbt $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ifbt))

imonitor/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2018 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_PARALLEL:=1
-PKG_INSTALL:=1
-
-PKG_SOURCE_PROTO=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
-PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/imonitor
-	CATEGORY:=Utilities
-	TITLE:=Inteno process supervisor
-	DEPENDS:=+ubox +uci +ubus +rpcd +rpcd-mod-file
-endef
-
-define Package/imonitor/description
-	imonitor is a process supervisor or a process control system similar to the Supervisor (http://supervisord.org/)
-endef
-
-define Package/imonitor/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/imonitor $(1)/usr/bin/
-	$(INSTALL_DIR) $(1)/etc/config
-endef
-
-$(eval $(call BuildPackage,imonitor))

imonitor/files/etc/config/imonitor

@@ -1,9 +0,0 @@
-config monitor
-	option app 'test'
-	option test 'echo test'
-	option stream 'stdout'
-	option string_match 'TEST'
-	option execute 'echo executing test'
-	option interval '10'
-	option nr_tests '2'
-

imonitor/files/etc/init.d/imonitor

@@ -1,29 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Start the imonitor
-#
-
-START=99
-STOP=01
-
-USE_PROCD=1
-NAME=imonitor
-
-start_service() {
-	procd_open_instance
-	procd_set_param command "imonitor"
-	procd_set_param stdout 1
-        procd_set_param stderr 1
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop() {
-	service_stop imonitor
-}
-
-reload_service() {
-	stop
-	start
-}
-

inbd/Makefile

@@ -1,53 +0,0 @@
-#
-# Copyright (C) 2016 Inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=inbd
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/inbd
-	CATEGORY:=Utilities
-	TITLE:=Inteno Netlink Bridge Daemon
-	URL:=
-	DEPENDS:=+libuci +libubus +libblobmsg-json +libnl-genl
-endef
-
-define Package/inbd/description
-	Application handling netlink messages from kernel and sending them out on ubus.
-endef
-
-define Package/inbd/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/inbd $(1)/usr/bin/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/inbd $(1)/etc/init.d/
-endef
-
-$(eval $(call BuildPackage,inbd))

iop/Makefile

@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=iop
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iop
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=iop utilities
-endef
-
-define Package/iop/description
-	This package contains Intenos Iop utilities
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/iop/install
-	true
-endef
-
-$(eval $(call BuildPackage,iop))

iop/configs/config

@@ -1,230 +0,0 @@
-CONFIG_BUILD_NLS=y
-CONFIG_BUSYBOX_CUSTOM=y
-CONFIG_CCACHE=y
-CONFIG_DEBUG=y
-CONFIG_DEVEL=y
-# CONFIG_LOCALMIRROR is not set
-CONFIG_PACKAGE_6in4=y
-CONFIG_PACKAGE_6rd=y
-CONFIG_PACKAGE_6to4=y
-CONFIG_PACKAGE_6tunnel=y
-CONFIG_PACKAGE_alsa-lib=y
-CONFIG_PACKAGE_chat=y
-CONFIG_PACKAGE_comgt=y
-CONFIG_PACKAGE_comgt-directip=y
-CONFIG_PACKAGE_comgt-ncm=y
-CONFIG_PACKAGE_crashlog=y
-CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_ds-lite=y
-CONFIG_PACKAGE_gdb=m
-CONFIG_PACKAGE_gdbserver=m
-CONFIG_PACKAGE_getopt=y
-CONFIG_PACKAGE_glib2=y
-CONFIG_PACKAGE_ice-client=y
-CONFIG_PACKAGE_ice-client-camerawatch=m
-CONFIG_PACKAGE_ice-client-fileme=m
-CONFIG_PACKAGE_ice-client-gigaset=m
-CONFIG_PACKAGE_ice-client-guest=m
-CONFIG_PACKAGE_ice-client-iperf=m
-CONFIG_PACKAGE_ice-client-logreader=m
-CONFIG_PACKAGE_ice-client-monitor=m
-CONFIG_PACKAGE_ice-client-netrounds=m
-CONFIG_PACKAGE_ice-client-rshell=m
-CONFIG_PACKAGE_ice-client-texec=m
-CONFIG_PACKAGE_icwmp-curl=y
-CONFIG_PACKAGE_ifbt=y
-CONFIG_PACKAGE_imonitor=y
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_iperf-mt=y
-CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_iptables=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_iup=y
-# CONFIG_PACKAGE_iwatchdog is not set
-CONFIG_PACKAGE_juci=y
-CONFIG_PACKAGE_juci-broadcom-iptv=y
-CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
-CONFIG_PACKAGE_juci-wifilife=y
-CONFIG_PACKAGE_juci-wireless=y
-CONFIG_PACKAGE_juci-ddns=y
-CONFIG_PACKAGE_juci-diagnostics=y
-CONFIG_PACKAGE_juci-dnsmasq-dhcp=y
-CONFIG_PACKAGE_juci-dropbear=y
-CONFIG_PACKAGE_juci-event=y
-CONFIG_PACKAGE_juci-firewall-fw3=y
-CONFIG_PACKAGE_juci-ice-client=y
-CONFIG_PACKAGE_juci-icwmp=y
-CONFIG_PACKAGE_juci-igmpinfo=y
-CONFIG_PACKAGE_juci-config-backup=y
-CONFIG_PACKAGE_juci-mwan3=y
-CONFIG_PACKAGE_juci-iup=y
-# CONFIG_PACKAGE_juci-qos is not set
-CONFIG_PACKAGE_juci-voice-client=y
-CONFIG_PACKAGE_juci-macdb=y
-CONFIG_PACKAGE_juci-minidlna=y
-CONFIG_PACKAGE_juci-mod-status=y
-CONFIG_PACKAGE_juci-mod-system=y
-CONFIG_PACKAGE_juci-natalie-dect=y
-CONFIG_PACKAGE_juci-netmode=y
-CONFIG_PACKAGE_juci-network-device=y
-CONFIG_PACKAGE_juci-network-dsl=y
-CONFIG_PACKAGE_juci-network-netifd=y
-CONFIG_PACKAGE_juci-network-port=y
-CONFIG_PACKAGE_juci-openvpn=y
-CONFIG_PACKAGE_juci-owsd=y
-CONFIG_PACKAGE_juci-printer=y
-CONFIG_PACKAGE_juci-realtime-graphs=y
-CONFIG_PACKAGE_juci-samba=y
-CONFIG_PACKAGE_juci-simple-gui=y
-CONFIG_PACKAGE_juci-snmpd=y
-CONFIG_PACKAGE_juci-sysupgrade=y
-CONFIG_PACKAGE_juci-theme-iopsys=y
-CONFIG_PACKAGE_juci-ubus-core=y
-CONFIG_PACKAGE_juci-upnp=y
-CONFIG_PACKAGE_juci-usb=y
-CONFIG_PACKAGE_juci-utils=y
-# CONFIG_PACKAGE_kmod-ipt-nathelper is not set
-CONFIG_PACKAGE_kmod-nls-base=y
-CONFIG_PACKAGE_kmod-siit=y
-CONFIG_PACKAGE_libcgroup-daemon=y
-CONFIG_PACKAGE_libcgroup=y
-# CONFIG_PACKAGE_libcgroup-utils is not set
-CONFIG_PACKAGE_ldd=y
-CONFIG_PACKAGE_libdaemon=y
-CONFIG_PACKAGE_libffmpeg-mini=y
-CONFIG_PACKAGE_libgmp=y
-CONFIG_PACKAGE_libreadline=y
-CONFIG_PACKAGE_loop-detector=m
-CONFIG_PACKAGE_minidlna=y
-CONFIG_PACKAGE_miniupnpd=y
-CONFIG_PACKAGE_mtd-utils=y
-CONFIG_PACKAGE_mtd-utils-deubinize=y
-CONFIG_PACKAGE_mtd-utils-imagewrite=y
-CONFIG_PACKAGE_mtd-utils-mkfs.jffs2=y
-CONFIG_PACKAGE_mtd-utils-nanddump=y
-CONFIG_PACKAGE_mwan3=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_ndisc6=y
-CONFIG_PACKAGE_ntfs-3g=y
-CONFIG_PACKAGE_ntpd=y
-CONFIG_PACKAGE_odhcp6c=y
-CONFIG_PACKAGE_odhcpd=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-# CONFIG_PACKAGE_p910nd is not set
-CONFIG_PACKAGE_peripheral_manager=y
-CONFIG_PACKAGE_port-management=y
-CONFIG_PACKAGE_power-management=y
-CONFIG_PACKAGE_ppp-mod-pppoa=y
-CONFIG_PACKAGE_ppp-mod-pppoe=y
-CONFIG_PACKAGE_ppp-mod-pppol2tp=y
-CONFIG_PACKAGE_ppp-mod-pptp=y
-CONFIG_PACKAGE_ppp-multilink=y
-# CONFIG_PACKAGE_ppp is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rdisc6=y
-CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_rpcd=y
-CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_samba3=y
-CONFIG_PACKAGE_samba3-nmbd=y
-CONFIG_PACKAGE_snmpd=y
-CONFIG_PACKAGE_strace=y
-CONFIG_PACKAGE_tc=y
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_terminfo=y
-CONFIG_PACKAGE_tptest=y
-CONFIG_PACKAGE_traceroute6=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_usb-modeswitch=y
-CONFIG_PACKAGE_usbreset=y
-CONFIG_PACKAGE_wget=y
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_libwifi=y
-CONFIG_PACKAGE_wifilife=y
-CONFIG_PACKAGE_wifimngr=y
-CONFIG_PACKAGE_xl2tpd=y
-CONFIG_PACKAGE_zoneinfo-core=y
-CONFIG_PACKAGE_zoneinfo-europe=y
-CONFIG_TARGET_CUSTOMER="INT"
-CONFIG_TARGET_ROOTFS_TARGZ=y
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-CONFIG_BUILD_LOG=y
-CONFIG_BUSYBOX_CONFIG_ADDUSER=y
-CONFIG_BUSYBOX_CONFIG_ARPING=y
-CONFIG_BUSYBOX_CONFIG_ASH_RANDOM_SUPPORT=y
-CONFIG_BUSYBOX_CONFIG_CTTYHACK=y
-CONFIG_BUSYBOX_CONFIG_DELUSER=y
-# CONFIG_BUSYBOX_CONFIG_DEVMEM is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_UDHCP_8021Q=y
-CONFIG_BUSYBOX_CONFIG_FIRST_SYSTEM_ID=100
-CONFIG_BUSYBOX_CONFIG_HTTPD=y
-# CONFIG_BUSYBOX_CONFIG_INSMOD is not set
-# CONFIG_BUSYBOX_CONFIG_MODINFO is not set
-# CONFIG_BUSYBOX_CONFIG_MODPROBE is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODPROBE_BLACKLIST=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
-CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
-CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
-CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
-CONFIG_BUSYBOX_CONFIG_LOGIN=y
-# CONFIG_BUSYBOX_CONFIG_LSMOD is not set
-CONFIG_BUSYBOX_CONFIG_LSPCI=y
-CONFIG_BUSYBOX_CONFIG_LSUSB=y
-CONFIG_BUSYBOX_CONFIG_MICROCOM=y
-# CONFIG_BUSYBOX_CONFIG_RMMOD is not set
-CONFIG_BUSYBOX_CONFIG_STTY=y
-CONFIG_BUSYBOX_CONFIG_TFTP=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_2_4_MODULES is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CGI=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NOLOGIN is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_SECURETTY=y
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
-CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_GET=y
-CONFIG_BUSYBOX_CONFIG_FEATURE_TFTP_PUT=y
-# CONFIG_BUSYBOX_CONFIG_WGET is not set
-# CONFIG_BUSYBOX_CONFIG_LOGIN_SCRIPTS is not set
-# CONFIG_BUSYBOX_CONFIG_LOGIN_SESSION_AS_CHILD is not set
-# CONFIG_BUSYBOX_CONFIG_PAM is not set
-# CONFIG_BUSYBOX_CONFIG_TFTP_DEBUG is not set
-# CONFIG_BUSYBOX_CONFIG_NTPD is not set
-# CONFIG_BUSYBOX_CONFIG_FEATURE_NTPD_SERVER is not set
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
-# CONFIG_SAMBA3_CONFIG_NO_PRINTING is not set
-# CONFIG_SIGNED_PACKAGES is not set
-CONFIG_KERNEL_DEVTMPFS=y
-CONFIG_KERNEL_DEVTMPFS_MOUNT=y
-CONFIG_PACKAGE_ip-full=y
-# CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_PACKAGE_iopupgrade=y
-

iop/configs/luci.diff

@@ -1,38 +0,0 @@
-CONFIG_PACKAGE_luci=y
-CONFIG_PACKAGE_luci-mod-admin-core=y
-CONFIG_PACKAGE_luci-mod-admin-full=y
-CONFIG_PACKAGE_luci-app-ddns=y
-CONFIG_PACKAGE_luci-app-dslstats=y
-CONFIG_PACKAGE_luci-app-firewall=y
-CONFIG_PACKAGE_luci-app-iup=y
-CONFIG_PACKAGE_luci-app-mcpd=y
-CONFIG_PACKAGE_luci-app-minidlna=y
-CONFIG_PACKAGE_luci-app-multiwan=y
-CONFIG_PACKAGE_luci-app-p910nd=y
-CONFIG_PACKAGE_luci-app-parental-control=y
-CONFIG_PACKAGE_luci-app-port-management=y
-CONFIG_PACKAGE_luci-app-power-mgmt=y
-CONFIG_PACKAGE_luci-app-samba=y
-CONFIG_PACKAGE_luci-app-sfp=y
-CONFIG_PACKAGE_luci-app-snmp=y
-CONFIG_PACKAGE_luci-app-speedtest=y
-CONFIG_PACKAGE_luci-app-upnp=y
-CONFIG_PACKAGE_luci-app-voice=y
-CONFIG_PACKAGE_luci-theme-base=y
-CONFIG_PACKAGE_luci-theme-bootstrap=y
-CONFIG_PACKAGE_luci-i18n-english=y
-CONFIG_PACKAGE_luci-proto-3g=y
-CONFIG_PACKAGE_luci-proto-4g=y
-CONFIG_PACKAGE_luci-proto-core=y
-CONFIG_PACKAGE_luci-proto-ipv6=y
-CONFIG_PACKAGE_luci-proto-ppp=y
-CONFIG_PACKAGE_luci-sgi-cgi=y
-CONFIG_PACKAGE_luci-lib-core=y
-CONFIG_PACKAGE_luci-lib-core_source=y
-CONFIG_PACKAGE_luci-lib-ipkg=y
-CONFIG_PACKAGE_luci-lib-json=y
-CONFIG_PACKAGE_luci-lib-nixio=y
-CONFIG_PACKAGE_luci-lib-nixio_notls=y
-CONFIG_PACKAGE_luci-lib-sys=y
-CONFIG_PACKAGE_luci-lib-web=y
-

iop/configs/target/intel_mips/config

@@ -1,97 +0,0 @@
-# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
-CONFIG_GCC_VERSION="6.3.0"
-CONFIG_TOOLCHAINOPTS=y
-# CONFIG_BINUTILS_USE_VERSION_2_27 is not set
-CONFIG_BINUTILS_USE_VERSION_2_28=y
-# CONFIG_BINUTILS_USE_VERSION_2_29_1 is not set
-# CONFIG_GCC_USE_GRAPHITE is not set
-# CONFIG_GCC_USE_VERSION_5 is not set
-CONFIG_GCC_USE_VERSION_6=y
-# CONFIG_GCC_USE_VERSION_7 is not set
-# CONFIG_LIBC_USE_GLIBC is not set
-CONFIG_LIBC_USE_MUSL=y
-
-
-# CONFIG_PACKAGE_ppp-mod-pppoa is not set
-
-#################### switch related
-CONFIG_PACKAGE_switch_cli_ugw8=y
-
-#################### ppa related
-#CONFIG_PACKAGE_ppacmd=y
-# CONFIG_PACKAGE_kmod-ppa-drv-gre is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-grx500-eth-bond is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-grx500-mpe is not set
-# CONFIG_PACKAGE_kmod-ppa-drv-mpe-ip97 is not set
-CONFIG_PACKAGE_mcast-pa=y
-
-#################### DSL related
-CONFIG_PACKAGE_dsl-cpe-control-vrx=y
-CONFIG_dsl-cpe-mei-vrx_DEVICE_VR11=y
-CONFIG_dsl-cpe-mei-vrx_IRQ_POLLING_ACTIVE=y
-CONFIG_PACKAGE_kmod-dsl-cpe-mei-vrx=y
-CONFIG_PACKAGE_ifxos=y
-CONFIG_PACKAGE_kmod-directconnect-dp=y
-CONFIG_PACKAGE_kmod-vrx518_tc_drv=y
-CONFIG_PACKAGE_vrx518_aca_fw=y
-CONFIG_PACKAGE_vrx518_ppe_fw=y
-CONFIG_dsl-cpe-api-vrx_MODEL_DEBUG=y
-CONFIG_dsl-cpe-control-vrx_DTI=y
-CONFIG_dsl-cpe-control-vrx_MODEL_DEBUG=y
-# yes intel dsl script need this.
-CONFIG_BUSYBOX_CONFIG_USLEEP=y
-#################### DSL related end
-
-#################### WIFI related
-CONFIG_PACKAGE_kmod-lantiq-wlan-wave-support_5_x=y
-CONFIG_PACKAGE_ltq-wlan-wave_5_x=y
-CONFIG_FEATURE_LTQ_WAVE_500_PCIE=y
-# CONFIG_FEATURE_LTQ_WAVE_500 is not set
-CONFIG_FEATURE_LTQ_WAVE_AR10_SUPPORT=y
-# CONFIG_FEATURE_LTQ_WAVE_STA is not set
-# CONFIG_FEATURE_LTQ_WAVE_DEBUG_TFTP_BINS is not set
-# CONFIG_FEATURE_LTQ_WAVE_FGPA_DUMMY_PHY is not set
-CONFIG_FEATURE_LTQ_WAVE_500B=y
-# WifiLife not yet available for Intel
-CONFIG_PACKAGE_juci-wifilife=n
-CONFIG_PACKAGE_wifilife=n
-####################
-
-#################### VoIP related
-CONFIG_PACKAGE_ltq-voice-tapi=y
-CONFIG_PACKAGE_ltq-voice-vmmc-xrx500=y
-CONFIG_PACKAGE_asterisk13=y
-CONFIG_PACKAGE_asterisk13-app-confbridge=y
-CONFIG_PACKAGE_asterisk13-app-playtones=y
-CONFIG_PACKAGE_asterisk13-app-read=y
-CONFIG_PACKAGE_asterisk13-app-record=y
-CONFIG_PACKAGE_asterisk13-app-system=y
-CONFIG_PACKAGE_asterisk13-bridge-builtin-features=y
-CONFIG_PACKAGE_asterisk13-bridge-simple=y
-CONFIG_PACKAGE_asterisk13-bridge-softmix=y
-CONFIG_PACKAGE_asterisk13-cdr=y
-CONFIG_PACKAGE_asterisk13-cdr-csv=y
-CONFIG_PACKAGE_asterisk13-chan-lantiq=y
-CONFIG_PACKAGE_asterisk13-chan-sip=y
-CONFIG_PACKAGE_asterisk13-format-g726=y
-CONFIG_PACKAGE_asterisk13-format-g729=y
-CONFIG_PACKAGE_asterisk13-format-gsm=y
-CONFIG_PACKAGE_asterisk13-format-sln=y
-CONFIG_PACKAGE_asterisk13-func-channel=y
-CONFIG_PACKAGE_asterisk13-func-db=y
-CONFIG_PACKAGE_asterisk13-func-shell=y
-CONFIG_PACKAGE_asterisk13-pbx-spool=y
-CONFIG_PACKAGE_asterisk13-res-musiconhold=y
-CONFIG_PACKAGE_asterisk13-res-rtp-asterisk=y
-CONFIG_PACKAGE_asterisk13-sounds=y
-CONFIG_PACKAGE_voice-client=y
-#################### VoIP related end
-
-# the options below this point is wrong but packages wont compile
-
-# CONFIG_PACKAGE_libcgroup is not set
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-
-# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
-# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
-

iop/configs/target/intel_mips/easy550/config

@@ -1,2 +0,0 @@
-CONFIG_LTQ_VOICE_VMMC_WITH_SLIC100=n
-CONFIG_LTQ_VOICE_VMMC_WITH_SLIC200=y

iop/configs/target/intel_mips/speedport_smart3/config

@@ -1,3 +0,0 @@
-# temporary solution for kernel
-CONFIG_KERNEL_GIT_BRANCH="speedport_smart3"
-CONFIG_KERNEL_GIT_COMMIT="fef58dd6628c4b8b9c921fae473874fcda6361bf"

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -1,15 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -1,4 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -1,7 +0,0 @@
-CONFIG_BCM_I2C=y
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y
-

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -1,6 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_USE_DSL=y
-CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -1,5 +0,0 @@
-
-# Disable kernel internal Dect. External Dect can still operate.
-CONFIG_TARGET_NO_DECT=y
-
-CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -1,15 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-
-# CONFIG_PACKAGE_juci-broadcom-wl is not set
-# CONFIG_PACKAGE_juci-minisnmpd is not set
-# CONFIG_PACKAGE_juci-router-openwrt is not set
-# CONFIG_PACKAGE_speedsvc is not set
-
-# CONFIG_juci_broadcom_wl is not set
-# CONFIG_juci_minisnmpd is not set
-# CONFIG_juci_router_openwrt is not set
-
-# CONFIG_PACKAGE_brcminfo is not set
-CONFIG_PACKAGE_brcm_fw_tool=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -1,3 +0,0 @@
-CONFIG_BCM_I2C=y
-CONFIG_TARGET_NO_DECT=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -1,2 +0,0 @@
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -1,5 +0,0 @@
-CONFIG_BCM_I2C=y
-CONFIG_TARGET_NO_DECT=y
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_ENDPOINT_MODULE=y
-

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -1,3 +0,0 @@
-CONFIG_TARGET_NO_DSL=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -1,4 +0,0 @@
-CONFIG_TARGET_NO_DHD=y
-CONFIG_TARGET_NO_VOICE=y
-CONFIG_BCM_I2C=y
-

iop/configs/target/iopsys_ramips/config

@@ -1,14 +0,0 @@
-# CONFIG_PACKAGE_libcgroup-daemon is not set
-# CONFIG_PACKAGE_libcgroup is not set
-# CONFIG_PACKAGE_power-management is not set
-# CONFIG_PACKAGE_qos-scripts is not set
-# CONFIG_PACKAGE_mtd-utils-deubinize is not set
-# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
-# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
-# CONFIG_PACKAGE_mtd-utils-nanddump is not set
-CONFIG_PACKAGE_mtd-utils-nandwrite=y
-CONFIG_PACKAGE_mtk-bndstrg=y
-CONFIG_PACKAGE_igmpproxy=y
-CONFIG_PACKAGE_kmod-nf-nathelper=y
-CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
-# CONFIG_PACKAGE_endptmngr is not set

iop/iop.completion

@@ -1,94 +0,0 @@
-# Bash completion for IOPSYS "./iop" utility
-# Source this file into the curent shell or copy it into
-# /usr/share/bash-completion/completions/ and start a new shell
-# for automatic availability.
-
-_iop_get_profiles()
-{
-    find feeds/targets/iopsys-*/ -name '*.diff' \
-        |awk -F'/' '{print$NF}' \
-        |awk -F. '{print$1}'
-}
-
-_iop_get_models()
-{
-    find feeds/targets/iopsys-*/ -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}' \
-        |egrep '^(cg|dg|eg|vg|vox)[0-9]'
-}
-
-_iop_get_model_customers()
-{
-    local model=$1
-    find customerconfigs/$prev -mindepth 1 -maxdepth 1 -type d \
-        |awk -F'/' '{print$NF}'
-}
-
-_iop() 
-{
-    local cur prev iopcmds
-
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    prev="${COMP_WORDS[COMP_CWORD-1]}"
-
-    iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
-             feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
-
-    if [ $COMP_CWORD -eq 1 ] ; then
-
-        # Complete the primary iop command
-        COMPREPLY=($(compgen -W "${iopcmds}" -- ${cur}))  
-        return 0
-
-    else
-    
-        # Complete the arguments to "iopcmds"
-        local cmd="${COMP_WORDS[1]}"
-        case "$cmd" in
-
-            extract_core)
-                if [ "$prev" == "-e" ] ; then
-                    _filedir -d
-                else
-                    COMPREPLY=( $(compgen -W "-e -h" -- ${cur}) )
-                fi
-                return 0
-                ;;
-
-            genconfig)
-                if [ "$prev" == "-p" ] ; then
-                    local profiles=$(_iop_get_profiles)
-                    COMPREPLY=( $(compgen -W "juci $profiles" -- ${cur}) )
-                elif [[ $cur == -* ]] ; then
-                    COMPREPLY=( $(compgen -W "-c -h -p -s -t -u -v" -- ${cur}) )
-                else
-                    local models=$(_iop_get_models)
-                    if echo $models |grep -qw -- $prev ; then
-                        local customers=$(_iop_get_model_customers $prev)
-                        COMPREPLY=( $(compgen -W "$customers" -- ${cur}) )
-                    else
-                        COMPREPLY=( $(compgen -W "$models" -- ${cur}) )
-                    fi
-                fi
-                return 0
-                ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
-            *)
-                # No arguments or arguments not supported yet
-                ;;
-        esac
-    fi
-}
-
-complete -F _iop ./iop
-complete -F _iop iop
-

iop/scripts/annexconfig.sh

@@ -1,72 +0,0 @@
-#!/bin/bash
-
-function disable_add_config () {
-	local COPTION="$1"
-
-	HAVE_OPTION=`grep $COPTION .config | wc -l`
-	HAVE_OPTION_DISABLED=`grep "# $COPTION" .config | wc -l`
-	if [ "$HAVE_OPTION" = "1" ]
-	then
-		if [ "$HAVE_OPTION_DISABLED" = "0" ]
-		then
-			sed -i -e "s,$COPTION=y,# $COPTION is not set,g" .config
-		fi
-	else
-		echo "# $COPTION is not set" >> .config
-	fi
-}
-
-function enable_option () {
-	local COPTION="$1"
-#	cat .config| grep DSL
-	sed -i -e "s,# $COPTION is not set,$COPTION=y,g" .config
-#	cat .config| grep DSL
-}
-
-function annexconfig {
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	local ANNEX="$1"
-
-	disable_add_config CONFIG_TARGET_NO_DSL
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_A
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_B
-	disable_add_config CONFIG_TARGET_DSL_ANNEX_C
-	disable_add_config CONFIG_TARGET_DSL_SADSL
-	disable_add_config CONFIG_TARGET_DSL_GFAST
-
-
-	if [ "$ANNEX" = "no" ]
-	then
-		echo "No DSL"
-		enable_option CONFIG_TARGET_NO_DSL
-	elif [ "$ANNEX" = "a" ]
-	then
-		echo "Annex A"
-		enable_option CONFIG_TARGET_DSL_ANNEX_A
-	elif [ "$ANNEX" = "b" ]
-	then
-		echo "Annex B"
-		enable_option CONFIG_TARGET_DSL_ANNEX_B
-	elif [ "$ANNEX" = "c" ]
-	then
-		echo "Annex C"
-		enable_option CONFIG_TARGET_DSL_ANNEX_C
-	elif [ "$ANNEX" = "sadsl" ]
-	then
-		echo "sadsl"
-		enable_option CONFIG_TARGET_DSL_SADSL
-	elif [ "$ANNEX" = "gfast" ]
-	then
-		echo "G.fast"
-		enable_option CONFIG_TARGET_DSL_GFAST
-	else
-		echo "Only option no,a,b,c,sadsl,gfast supported"
-	fi
-
-}
-
-register_command "annexconfig" "Select configuration annex"

iop/scripts/build_branch.sh

@@ -1,60 +0,0 @@
-#!/bin/sh
-# build_branch
-#./iop build_branch <branch> <board> [<customer>]
-
-function build_branch_usage {
-	echo "usage: $0 build_branch <branch> <board> [<customer>]"
-	echo "example: $0 build_branch devel-new ex400 DEV"
-	echo "example: $0 build_branch_sysupgrade devel-new ex400 DEV 192.168.1.1 -n"
-	set +x
-	exit 1
-}
-
-function branch_exists {
-	local branch=$1
-	[ -z "$branch" ] && return 1
-	git branch | grep -q $branch && return 0
-	return 1
-}
-
-function build_branch {
-	set -x
-	local branch=$1
-	local board=$2
-	local customer=$3
-	[ "$customer" == "INT" ] && customer=""
-
-	if ! branch_exists $branch ; then
-		echo "Branch $branch not found"
-		build_branch_usage
-	fi
-
-time {
-	git fetch origin || build_branch_usage
-	git fetch --all -p || build_branch_usage
-	git checkout $branch || build_branch_usage
-	git pull || exit 1
-	./iop feeds_update || build_branch_usage
-	./iop genconfig -c $board $customer || build_branch_usage
-	make -j 8 || build_branch_usage
-	set +x
-}
-}
-
-function build_branch_sysupgrade {
-	set -x
-	local branch=$1 ; shift
-	local board=$1 ; shift
-	local customer=$1 ; shift
-	local ip=$1 ; shift
-	local opts=$*
-
-time {
-	./iop build_branch $branch $board $customer
-	[ "$?" == "0" ] && ./iop ssh_sysupgrade_latest $ip $opts
-}
-	set +x
-}
-
-register_command "build_branch" "<branch> <board> [<customer>]  Build a <branch> for a <board> [with a <customer> profile]"
-register_command "build_branch_sysupgrade" "<branch> <board> <customer>|INT <ip> [<opts>]  Build a <branch> for a <board> [with a <customer> profile] and sysupgrade [with <opts>] it on the router at <ip>"

iop/scripts/cfe_upgrade.sh

@@ -1,42 +0,0 @@
-# this is a developer helper script to install firmware on a remote host running in CFE mode
-
-function usage {
-	echo "usage: $0 cfe_upgrade <host> <file>"
-}
-
-function cfe_upgrade {
-	if [ -z "$1" ] ; then
-		usage
-		echo "Error: host required"
-		exit 1
-	fi
-	if [ -z "$2" ] ; then
-		usage
-		echo "Error: firmware filename required"
-		exit 1
-	fi
-	if [ ! -e $2 ] ; then
-		usage
-		echo "Error: firmware file does not exist"
-		exit 1
-	fi
-	IMAGE=`basename $2`
-	echo "CFE upgrade host: $1 with file $IMAGE"
-	[ "$2" ] && [ -e "$2" ] &&  curl -i -F filedata=@$2  http://$1/upload.cgi && echo "upgrade done!"
-}
-
-register_command "cfe_upgrade" "<host> <file>  Install firmware on remote host in CFE mode"
-
-function cfe_upgrade_latest {
-	if [ -z "$1" ] ; then
-		echo "usage: $0 cfe_upgrade_latest <host>"
-		echo "Error: host required"
-		exit 1
-	fi
-	{ cd `dirname $0`
-		IMAGE=`ls -Art bin/*/*.w | tail -n1`
-		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop cfe_upgrade $1 $IMAGE
-	}
-}
-
-register_command "cfe_upgrade_latest" "<host>  Install latest firmware on remote host in CFE mode"

iop/scripts/compile.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-function compile {
-	if [ -z "$1" ]; then
-		echo "Please give a valid package as first argument."
-		return 1
-	fi
-
-	local cpath pck
-	local lpath=$(find package/ -type l -name $1)
-	local dpath=$(find package/ -type d -name $1)
-
-	for pck in $lpath $dpath; do
-		if [ -n "$(ls $pck/Makefile 2>/dev/null)" ]; then
-			cpath=$pck
-			break
-		fi
-	done
-
-	if [ -n "$cpath" ]; then
-		make $cpath/compile V=$2
-	else
-		echo "Package $1 does not exist. Make sure you have installed the necessary feed."
-	fi
-}
-
-register_command "compile" "Compile a specific package: ./iop compile <PACKAGE_NAME> [0-99]; i.e ./iop compile netifd 99"

iop/scripts/extract_core.sh

@@ -1,134 +0,0 @@
-#!/bin/bash
-
-function extract_core {
-	initial_commit=1427738ac4b77f474999ae21af1a8b916468df36
-	patch_dir=extract_core_patches
-	topdir=$(pwd)
-
-	# Paths to packages that should be exported.
-	paths+='package/network/services/dnsmasq '
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
-	paths+='package/utils/busybox '
-	paths+='package/base-files '
-	paths+='package/system/procd '
-	paths+='package/system/rpcd '
-	paths+='package/network/services/openvpn '
-
-	function print_usage {
-		echo "Usage: $0 extract_core"
-		echo "  -p <path-to-package> | default"
-		echo "  -r <import-repo>"
-		echo "  -b <import-branch>"
-		echo ""
-		echo "Example: $0 extract_core"
-		echo "  -p package/utils/busybox"
-		echo "  -r feeds/lede_core"
-		echo "  -b devel"
-	}
-
-	function orphan_branch {
-		local branch=$1
-
-		git checkout --orphan $branch
-		git rm -rf --cached *
-		git rm -rf --cached .empty
-		rm -rf *
-		rm -rf .empty
-	}
-
-	function export_core {
-		local path=$1
-
-		echo "Extracting ${path} from core to ${import_repo}:${import_branch}"
-
-		# Generate patches from start of openwrt repo.
-		mkdir -p $patch_dir
-		repo=$(basename $path)
-		dir=$(dirname $path)
-		git format-patch $initial_commit $path -o $patch_dir
-
-		# Remove dirname from patches to commit the packages to the
-		# top directory in the destination repo.
-		ls $patch_dir | while read line; do
-			sdir=$(echo "$dir/" | sed 's/\//\\\//g')
-			sed -i "s/$sdir//g" $patch_dir/$line
-		done
-		
-		cd $import_repo
-		
-		if [ -n "$(git rev-parse -q --verify remotes/origin/$repo)" ]; then
-			# Create temporary branch to apply patches on.
-			# We need to do this as git am does not like it
-			# when patches have already been applied.
-			orphan_branch tmp
-			git am $topdir/$patch_dir/*
-			
-			# Rebase and merge.
-			git rebase origin/$repo
-			git checkout --track -b $repo origin/$repo
-			git merge tmp
-			git br -d tmp
-		else
-			# Remote branch does not exist for packet so create it.
-			orphan_branch $repo
-			git am $topdir/$patch_dir/*
-		fi
-
-		git push origin $repo
-		
-		# Merge the package branch into the main branch.
-		git checkout $import_branch
-		git merge $repo -m "Syncing $repo"
-		git push origin $import_branch
-		git br -d $repo
-		
-		rm -rf $topdir/$patch_dir
-		cd $topdir
-	}
-
-	# Execute user command
-	while getopts "p:r:b:h" opt; do
-		case $opt in
-			p)
-				export_path=${OPTARG}
-				;;
-			r)
-				import_repo=${OPTARG}
-				;;
-			b)
-				import_branch=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$export_path" ] || [ ! -n "$import_repo" ] || [ ! -n "$import_branch" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	if [ "$export_path" == "default" ]; then
-		echo "Extracting default packages:"
-		for p in $paths; do
-			export_core $p
-
-		done
-	else
-		export_core $export_path
-	fi
-
-	exit 0
-}
-
-register_command "extract_core" "Extract core package to separate feed"
-
-

iop/scripts/extract_top.sh

@@ -1,71 +0,0 @@
-#!/bin/bash
-
-function extract_top {
-	tmp_dir=extract_top_tmp
-
-	# Paths to packages that should be ignored.
-	paths+='package/network/services/dnsmasq '
-	paths+='package/network/config/firewall '
-	paths+='package/network/config/netifd '
-	paths+='package/network/config/qos-scripts '
-	paths+='package/utils/busybox '
-	paths+='package/base-files '
-	paths+='package/system/procd '
-	paths+='package/system/rpcd '
-	paths+='package/network/services/openvpn '
-
-	function extract {
-
-		current_branch=$(git rev-parse --abbrev-ref HEAD)
-		git format-patch $start_commit -o $tmp_dir #> /dev/null
-
-		ls $tmp_dir |
-			while read file; do
-				# Remove feed patches.
-				#			echo $file | grep -i Update-feed > /dev/null && \
-				#				rm $tmp_dir/$file && continue
-				cat $tmp_dir/$file | grep "+++ b/feeds.conf" > /dev/null && \
-					rm $tmp_dir/$file && continue
-				
-				# Remove core patches.
-				for path in $paths; do
-					cat $tmp_dir/$file | grep $path > /dev/null && \
-						rm $tmp_dir/$file && break
-				done
-			done
-
-		git checkout -b ${current_branch}-new $start_commit
-		git am $tmp_dir/*
-		git checkout $current_branch
-		rm -rf $tmp_dir
-	}
-	
-	function print_usage {
-
-		echo "Usage:"
-		echo "  $0 -s <start_commit>"
-	}
-
-	# Execute user command
-	while getopts "s:" opt; do
-		case $opt in
-			s)
-				start_commit=${OPTARG}
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$start_commit" ]; then
-   		print_usage
-		exit 1
-	fi
-
-	extract
-
-}
-
-register_command "extract_top" "Extract commits made to top repo"

iop/scripts/feeds_update.sh

@@ -1,60 +0,0 @@
-#! /bin/bash
-
-function feeds_update {
-
-    developer=0
-    override=1
-    start=$(date -u +'%s');
-    while getopts "n" opt; do
-	case $opt in
-	    n)
-		override=0
-		;;
-	esac
-    done
-
-
-    git remote -v | grep -q http || developer=1
-
-    cp .config .genconfig_config_bak
-
-    #if -d argument is passed, clone feeds with ssh instead of http
-    if [ $developer == 1 ]; then
-	./scripts/feeds update -g
-    else
-	./scripts/feeds update
-    fi
-	./scripts/feeds update -ai
-
-    # replace core packages with iopsys versions
-    if [ $override == 1 ]; then
-		./scripts/feeds install -f -p lede_core -a
-    fi
-
-    # targets need to be installed explicitly
-    ./scripts/feeds install -p targets iopsys-brcm63xx-mips
-    ./scripts/feeds install -p targets iopsys-brcm63xx-arm
-    ./scripts/feeds install -p targets iopsys-ramips
-    ./scripts/feeds install -p intel_targets intel_mips
-
-    # install all packages
-    ./scripts/feeds install -a 
-
-    # remove broken symlinks ( for packages that are no longer in the feed )
-    find -L package/feeds -maxdepth 2 -type l -delete
-
-    cp .genconfig_config_bak .config
-    make defconfig
-
-    # record when we last run this script
-    touch tmp/.iop_bootstrap 
-
-    # always return true
-    exit 0
-}
-
-register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
-
-
-
-

iop/scripts/genconfig.sh

@@ -1,421 +0,0 @@
-#!/bin/bash
-
-function genconfig {
-	export CLEAN=0
-	export IMPORT=1
-	export SRCTREEOVERR=0
-	export FILEDIR="files/"
-	export THEMEDIR="themes"
-	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop/configs"
-	CUSTPATH="customerconfigs"
-	export CUSTCONF="customerconfigs/customers"
-	export VERBOSE=0
-	export DEVELOPER=0
-	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
-
-	target="bogus"
-	masterconfig=1
-
-	# Takes a board name and returns the target name in global var $target
-	set_target() {
-	    local profile=$1
-
-	    local iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
-	    local iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
-	    local iopsys_ramips="ex400 sdx810_ap"
-	    local intel_mips="easy550 easy350 norrland speedport_smart3"
-	    local ramips="mt7621"
-
-	    if [ "$profile" == "LIST" ]
-	    then
-		for list in iopsys_brcm63xx_mips iopsys_brcm63xx_arm iopsys_ramips intel_mips
-		do
-		    echo "$list based boards:"
-		    for b in ${!list}
-		    do
-			echo -e "\t$b"
-		    done
-		done
-		return
-	    fi
-	    
-	    
-	    local targets
-
-	    for p in $iopsys_brcm63xx_mips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_mips"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_brcm63xx_arm; do
-		if [ $p == $profile ]; then
-		    target="iopsys_brcm63xx_arm"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_ramips; do
-		if [ $p == $profile ]; then
-		    target="iopsys_ramips"
-		    return
-		fi
-	    done
-
-	    for p in $ramips; do
-		if [ $p == $profile ]; then
-		    target="ramips"
-		    masterconfig=0
-		    return
-		fi
-	    done
-
-	    for p in $intel_mips; do
-		if [ $p == $profile ]; then
-		    target="intel_mips"
-		    return
-		fi
-	    done
-
-	}
-
-	git remote -v | grep -q http || {
-		DEVELOPER=1
-
-		bcmAllowed=0
-		iceAllowed=0
-		endptAllowed=0
-		natalieAllowed=0
-		mediatekAllowed=0
-		wifilifeAllowed=0
-
-		allowedRepos="$(ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null | grep -w 'R\|W' | awk '{print$NF}')"
-		for repo in $allowedRepos; do
-			case $repo in
-			bcmkernel) bcmAllowed=1 ;;
-			ice-client) iceAllowed=1 ;;
-			endptcfg) endptAllowed=1 ;;
-			natalie-dect*) natalieAllowed=1 ;;
-			linux) mediatekAllowed=1 ;;
-			wifilife) wifilifeAllowed=1 ;;
-			esac
-		done
-	}
-
-	v() {
-		[ "$VERBOSE" -ge 1 ] && echo "$@"
-	}
-
-	usage() {
-		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
-		echo
-		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
-		echo -e "  -v|--verbose\tVerbose"
-		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
-		echo -e "  -p|--profile\tSet profile (if exists) default juci"
-		echo -e "  -s|--override\tEnable 'Package source tree override'"
-		echo -e "  -h|--help\tShow this message"
-		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
-		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo -e "  -b|--boards\tList all board types"		
-		echo
-		echo "Example ./iop genconfig vg50 TELIA"
-		echo "(if no customerconfig is chosen the Inteno Config will be used)"
-		echo
-		exit 0
-	}
-
-	list_customers()
-	{
-		local ALL="$1"
-		local CUSTOMER="$2"
-		if [ "$CUSTOMER" -a -d "$CUSTCONF/$CUSTOMER" ]; then
-			local boards="$(ls -1 "$CUSTCONF/$CUSTOMER" | grep -v common | grep -v juci-theme)"
-			if [ "$boards" ]; then
-				echo "$CUSTOMER has following boards:"
-				for board in $boards; do
-					echo -e "\t$board"
-				done
-			else
-				echo "No boards found for $CUSTOMER"
-			fi
-		elif [ "$CUSTOMER" ]; then
-			echo "No customer called $CUSTOMER"
-			exit 1
-		elif [ -d $CUSTCONF ]; then
-			local customers="$(ls -1 $CUSTCONF)"
-			if [ "$customers" -a "$ALL" == 1 ]; then
-				for customer in $customers; do
-					echo $customer
-					local boards="$(ls -1 $CUSTCONF/$customer | grep -v common | grep -v juci-theme)"
-					if [ "$boards" ]; then
-						for board in $boards; do
-							echo -e "\t$board"
-						done
-					else
-						echo "has no boards"
-					fi
-				done
-			elif [ "$customers" ]; then
-				echo -e "$customers"
-			else
-				echo "no customers found"
-			fi
-		else
-			echo "No $CUSTCONF folder found"
-		fi
-		exit 0
-	}
-
-
-	generate_config()
-	{
-	DIFFFILE="$1"
-	MASTERFILE="$2"
-	while read p; do
-		v "$p"
-		sed -r -i "$p" $MASTERFILE
-	done < $DIFFFILE
-	}
-
-	setup_dirs()
-	{
-		if ssh -o ConnectTimeout=5 git@private.inteno.se 2>/dev/null  | grep -qw ${CUSTREPO:22}; then
-			if [ ! -d "$CUSTPATH" ]; then
-				git clone "$CUSTREPO" "$CUSTPATH"
-			elif [ $IMPORT -eq 1 ]; then
-				cd $CUSTPATH
-				v "git pull"
-				git pull
-				cd - >/dev/null #go back
-			fi
-		else
-			echo "You do not have access to $CUSTREPO"
-		fi
-
-		if [ ! -d "$FILEDIR" ]; then
-			mkdir -p $FILEDIR
-		elif [ -d "$FILEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $FILEDIR*"
-			rm -rf $FILEDIR*
-		fi
-
-		if [ ! -d "$THEMEDIR" ]; then
-			mkdir -p $THEMEDIR
-		elif [ -d "$THEMEDIR" -a $CLEAN -eq 1 ]; then
-			v "rm -rf $THEMEDIR/*"
-			rm -rf $THEMEDIR/*
-		fi
-	}
-
-	create_and_copy_files()
-	{
-		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
-
-		# Validate seleced board and customers
-		set_target $BOARDTYPE
-		if [ $target == "bogus" ]; then
-			echo "Hardware profile does not exist"
-			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
-					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
-				fi
-			done
-		fi
-
-		# Generate base config
-		# Used only for iopsys targets, not openwrt targets
-		rm -f .config
-		if [ $masterconfig -eq 1 ]; then
-			v "Config $BOARDTYPE selected"
-			v "cp $CONFIGPATH/config .config"
-			cp $CONFIGPATH/config .config
-		fi
-
-		# Add target (soc/board specific )
-		if [ -f $CONFIGPATH/target/config ]; then
-		    cat $CONFIGPATH/target/config >> .config
-		fi
-		if [ -f $CONFIGPATH/target/$target/config ]; then
-		    cat $CONFIGPATH/target/$target/config >> .config
-		fi
-		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
-		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
-		fi
-
-		# Apply profile diff to master config if selected
-		if [ -n "$PROFILE" ]; then
-			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
-				cat $CONFIGPATH/$PROFILE.diff >> .config
-			elif [ "$PROFILE" == "juci" ]; then
-				v "Default profile (juci) is selected."
-			else
-				echo "ERROR: profile $PROFILE does not exist!"
-				exit 1
-			fi
-		else
-			v "No profile selected! Using default."
-		fi
-
-		# Set target and profile
-
-		#special handling for intel_mips which use TARGET_DEVICES
-		if [ "$target" = "intel_mips" ]; then
-			subtarget="xrx500"
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
-			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
-			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
-			device=$(echo $BOARDTYPE | tr a-z A-Z)
-			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
-		else
-			echo "CONFIG_TARGET_${target}=y" >> .config
-			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-		fi
-
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
-
-		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
-		fi
-
-		# Set target version
-		local GIT_TAG=$(git describe --abbrev=0 --tags)
-		echo "CONFIG_TARGET_VERSION=\"${GIT_TAG}\"" >> .config
-
-		# Enable Pckage source tree override if selected
-		[ $SRCTREEOVERR -eq 1 ] && echo CONFIG_SRC_TREE_OVERRIDE=y >> .config
-
-		# developer mode selected ?
-		echo "CONFIG_DEVEL=y" >>.config
-		if [ $DEVELOPER -eq 1 ]; then
-			# rewrite url to clone with ssh instead of http
-			echo "CONFIG_GITMIRROR_REWRITE=y" >>.config
-			[ $bcmAllowed -eq 0 ] && echo "CONFIG_BCM_OPEN=y" >> .config
-			[ $iceAllowed -eq 0 ] && echo "CONFIG_ICE_OPEN=y" >> .config
-			[ $endptAllowed -eq 0 ] && echo "CONFIG_ENDPT_OPEN=y" >> .config
-			[ $natalieAllowed -eq 0 ] && echo "CONFIG_NATALIE_OPEN=y" >> .config
-			[ $mediatekAllowed -eq 0 ] && echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			[ $wifilifeAllowed -eq 0 ] && echo "CONFIG_WIFILIFE_OPEN=y" >> .config
-		else
-			echo "CONFIG_GITMIRROR_REWRITE=n" >>.config
-			echo "CONFIG_BCM_OPEN=y" >> .config
-			echo "CONFIG_ICE_OPEN=y" >> .config
-			echo "CONFIG_ENDPT_OPEN=y" >> .config
-			echo "CONFIG_NATALIE_OPEN=y" >> .config
-			echo "CONFIG_MEDIATEK_OPEN=y" >> .config
-			echo "CONFIG_WIFILIFE_OPEN=y" >> .config
-		fi
-
-		# Force regeneration of themes
-		touch package/feeds/juci/juci/Makefile
-
-		# Force regeneration of kernel Makefile
-		# Needed to disable kmods for iopsys-brcm targets
-		touch package/kernel/linux/Makefile
-
-		# we need to signal to bradcom SDK that we have changed the board id
-		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
-		# so just touch that file.
-		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-				
-		# Set default values based on selected parameters
-		v "$(make defconfig 2>&1)"
-
-		# Temporary fixup for juci/luci profile
-		if [ "$PROFILE" == "luci" ]; then
-			sed -i '/CONFIG_DEFAULT_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_juci/d' .config
-			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
-		fi
-
-		if [ $masterconfig -eq 1 ]; then
-			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
-		fi
-
-		# Clean base-file package to force rebuild when changing profile
-		v "$(make package/base-files/clean 2>&1)"
-	}
-
-	####### main #####
-	if [ ! -e tmp/.iop_bootstrap ]; then
-		echo "You have not installed feeds. Running genconfig in this state would create a non functional configuration."
-		echo "Run: iop feeds_update"
-		exit 0
-	fi
-
-	if [ $# -eq 0 ]; then
-		echo Current profile:
-		cat $CURRENT_CONFIG_FILE
-		echo "Try ./iop genconfig -h' to get instructions if you want to change current config"
-		exit 0
-	else
-		while [ -n "$1" ]; do
-			case "$1" in
-
-			-c|--clean) export CLEAN=1;;
-			-n|--no-update) export IMPORT=0;;
-			-v|--verbose) export VERBOSE="$(($VERBOSE + 1))";;
-			-p|--profile) export PROFILE="$2"; shift;;
-			-r|--repo) export CUSTREPO="$2"; shift;;
-			-s|--override) export SRCTREEOVERR=1;;
-			-h|--help) usage;;
-			-l|--list) list_customers 0 $2;;
-			-a|--list-all)list_customers 1;;
-			-b|--boards)set_target LIST;exit 0;;
-			-*)
-				echo "Invalid option: $1 "
-				echo "Try -h or --help for more information."
-				exit 1
-				;;
-			*) break;;
-			esac
-			shift;
-		done
-
-		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
-
-		setup_dirs
-		create_and_copy_files "$@"
-	fi
-}
-
-register_command "genconfig" "Generate configuration for board and customer"

iop/scripts/generate_tarballs.sh

@@ -1,187 +0,0 @@
-#!/bin/bash
-
-
-build_bcmkernel_consumer() {
-	local tarfile bcmkernelcommith sdkversion
-	sdkversion=$(grep "CONFIG_BRCM_SDK_VER.*=y" .config | awk -F'[_,=]' '{print$5}')
-	sdkversion=${sdkversion:0:4}${sdkversion:(-1)}
-	bcmkernelcommith=$(grep -w "PKG_SOURCE_VERSION:" $curdir/feeds/broadcom/bcmkernel/${sdkversion:0:5}*.mk | cut -d'=' -f2)
-	# do not build bcmopen sdk if it was already built before
-	[ -n "$board" -a -n "$bcmkernelcommith" ] || return
-	ssh $SERVER "test -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz" && return
-	cd ./build_dir/target-*/bcmkernel-*-${sdkversion:0:4}*/bcm963xx/release
-	bash do_consumer_release -p $profile -y -F
-	tarfile='out/bcm963xx_*_consumer.tar.gz'
-	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
-	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
-	rm -f $tarfile
-	cd "$curdir"
-}
-
-build_natalie_consumer() {
-	# create natalie-dect open version tar file
-	local natalieversion nataliecommith
-	grep -q "CONFIG_TARGET_NO_DECT=y" .config && return
-	natalieversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
-	nataliecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/natalie-dect/Makefile | cut -d'=' -f2)
-	[ -n "$profile" -a -n "$natalieversion" -a -n "$nataliecommith" ] || return
-	ssh $SERVER "test -f $FPATH/natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz" && return
-	cd ./build_dir/target-*/natalie-dect-$natalieversion/
-	mkdir natalie-dect-open-$natalieversion
-	cp -f ipkg-*/natalie-dect/lib/modules/*/extra/dect.ko natalie-dect-open-$natalieversion/dect.ko
-	tar -czv  natalie-dect-open-$natalieversion/ -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	scp -pv natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $SERVER:$FPATH/
-	cp natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz $curdir/
-	rm -rf natalie-dect-open-$natalieversion
-	rm -f natalie-dect-$profile-$natalieversion-$nataliecommith.tar.gz
-	cd "$curdir"
-}
-
-build_endptmngr_consumer() {
-	# create endptmngr open version tar file
-	local endptversion endptcommith
-	grep -q "CONFIG_TARGET_NO_VOICE=y" .config && return
-	endptversion=$(grep -w "PKG_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	endptcommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/endptmngr/Makefile | cut -d'=' -f2)
-	[ -n "$profile" -a -n "$endptversion" -a -n "$endptcommith" ] || return
-	ssh $SERVER "test -f $FPATH/endptmngr-$profile-$endptversion-$endptcommith.tar.gz" && return
-	cd ./build_dir/target-*/endptmngr-$endptversion/
-	mkdir endptmngr-open-$endptversion
-	mkdir endptmngr-open-$endptversion/src
-	cp ./src/endptmngr endptmngr-open-$endptversion/src
-	cp -r ./files/ endptmngr-open-$endptversion/
-	tar -czv  endptmngr-open-$endptversion/ -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	scp -pv endptmngr-$profile-$endptversion-$endptcommith.tar.gz $SERVER:$FPATH/
-	cp endptmngr-$profile-$endptversion-$endptcommith.tar.gz $curdir/
-	rm -rf endptmngr-open-$endptversion
-	rm -f endptmngr-$profile-$endptversion-$endptcommith.tar.gz
-	cd "$curdir"
-}
-
-build_ice_consumer() {
-	# create ice-client open version tar file
-	local iceversion icebasever icerelease icecommith
-	icecommith=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/ice-client/Makefile | head -1 | cut -d'=' -f2)
-	icebasever=$(grep -w "BASE_PKG_VERSION:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
-	icerelease=$(grep -w "PKG_RELEASE:" ./feeds/iopsys/ice-client/Makefile | cut -d'=' -f2)
-	iceversion=$icebasever$icerelease
-	[ -n "$target" -a -n "$iceversion" -a -n "$icecommith" ] || return
-	ssh $SERVER "test -f $FPATH/ice-client-$target-$iceversion-$icecommith.tar.gz" && return
-	cd ./build_dir/target-*/ice-client-$icebasever/ipkg-* || cd ./build_dir/target-mips*musl-*/ice-client-$icebasever/ipkg-*
-	tar -czv  ice-client -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	scp -pv ice-client-$target-$iceversion-$icecommith.tar.gz $SERVER:$FPATH/
-	cp ice-client-$target-$iceversion-$icecommith.tar.gz $curdir/
-	rm -f ice-client-$target-$iceversion-$icecommith.tar.gz
-	cd "$curdir"
-}
-
-build_wifilife_consumer() {
-	local ver commit
-	ver=$(grep -w "PKG_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	commit=$(grep -w "PKG_SOURCE_VERSION:" ./feeds/iopsys/wifilife/Makefile | cut -d'=' -f2)
-	[ -n "$ver" -a -n "$commit" ] || return
-	ssh $SERVER "test -f $FPATH/wifilife-$target-${ver}_${commit}.tar.xz" && return
-	cd ./build_dir/target-*/wifilife-$ver/ipkg-* || cd ./build_dir/target-mips*musl-*/wifilife-$ver/ipkg-*
-	mkdir -p wifilife-$ver/src
-	cp -rf wifilife/usr/sbin/* wifilife-$ver/src/
-	tar Jcf wifilife-${target}-${ver}_${commit}.tar.xz wifilife-$ver
-	scp -pv wifilife-$target-${ver}_${commit}.tar.xz $SERVER:$FPATH/
-	cp wifilife-${target}-${ver}_${commit}.tar.xz $curdir/
-	rm -rf wifilife-$ver
-	rm -f wifilife-${target}-${ver}_${commit}.tar.xz
-	cd "$curdir"
-}
-
-build_mediatek_kernel() {
-	local mediatek_commit kernel_version kernel
-
-	mediatek_commit=$(grep CONFIG_KERNEL_GIT_COMMIT .config | cut -d '=' -f2 | tr -d '"')
-	kernel_version=$(grep KERNEL_PATCHVER target/linux/iopsys-ramips/Makefile  | cut -d '=' -f2)
-	kernel=linux-${kernel_version}.*
-	[ -n "$mediatek_commit" ] || return
-	ssh $SERVER "test -f $FPATH/mediatek-kernel-open-$mediatek_commit.tar.gz" && return
-	echo "Building mediatek kernel tarball from kernel commit:"	
-	echo $mediatek_commit
-	cd build_dir/target-mipsel_1004kc*/linux-iopsys-ramips*/$kernel
-
-	# Save Kconfig files to recreate the same kernel config,
-	# delete everyting else.
-	find drivers/net/wireless/mt_wifi -type f ! -name Kconfig | xargs rm
-	find drivers/net/wireless/rlt_wifi -type f ! -name Kconfig | xargs rm
-
-	# remove git repo
-	rm -rf .git
-
-	# patch kernel for openstk
-	ls consumer_release | while read line; do patch -p1 < consumer_release/$line; done
-	cd ..
-
-	tar -czv $kernel -f mediatek-kernel-open-$mediatek_commit.tar.gz
-	scp -pv mediatek-kernel-open-$mediatek_commit.tar.gz $SERVER:$FPATH/
-	cd "$curdir"
-}
-
-function print_usage {
-	echo "Usage: $0 generate_tarballs"
-	echo "  -t <target>"
-}
-
-function generate_tarballs {
-
-    SERVER="god@software.inteno.se"
-    FPATH="/var/www/html/iopsys/consumer"
-
-    set -e
-    git remote -v | grep -q http && return # do not continue if this is an open SDK environment
-
-    target=$(grep CONFIG_TARGET_BOARD .config | cut -d'=' -f2 | tr -d '"')
-    board=$(grep CONFIG_TARGET_IBOARDID .config | cut -d'=' -f2 | tr -d '"')
-    profile=$(grep CONFIG_BCM_KERNEL_PROFILE .config | cut -d'=' -f2 | tr -d '"')
-    majver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f1 -d .)
-    minver=$(grep CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"' | cut -f2 -d .)
-    curdir="$PWD"
-
-
-	# Execute user command
-	while getopts "t:h" opt; do
-		case $opt in
-			t)
-				stk_target=${OPTARG}
-				;;
-			h)
-				print_usage
-				exit 1
-				;;
-			\?)
-				print_usage
-				exit 1
-				;;
-		esac
-	done
-
-	if [ ! -n "$stk_target" ]; then
-		print_usage
-		exit 1
-	fi
-
-	if [ "$stk_target" == "broadcom" ]; then
-		build_bcmkernel_consumer
-		build_natalie_consumer
-		build_endptmngr_consumer
-		build_ice_consumer
-		build_wifilife_consumer
-	elif [ "$stk_target" == "mediatek" ]; then
-		build_mediatek_kernel
-		build_ice_consumer		
-		build_wifilife_consumer
-	else
-		echo "Invalid target: $stk_target"
-		print_usage
-		exit 1
-	fi
-
-}
-
-register_command "generate_tarballs" "Generate tarballs for Open SDK"
-

iop/scripts/install_key.sh

@@ -1,18 +0,0 @@
-# this is a developer helper script to install the public ssh key in the created image
-
-function install_key {
-
-    mkdir -p files/etc/dropbear
-    test -e ~/.ssh/id_dsa.pub && cat ~/.ssh/id_dsa.pub >>files/etc/dropbear/authorized_keys
-    test -e ~/.ssh/id_rsa.pub && cat ~/.ssh/id_rsa.pub >>files/etc/dropbear/authorized_keys
-    chmod 0644 files/etc/dropbear/authorized_keys
-
-    echo "::sysinit:/etc/init.d/rcS S boot" >files/etc/inittab
-    echo "::shutdown:/etc/init.d/rcS K shutdown" >>files/etc/inittab
-    echo "tty/0::askfirst:/bin/ash --login" >>files/etc/inittab
-    echo "ttyS0::askfirst:/bin/ash --login" >>files/etc/inittab
-
-    echo Done
-}
-
-register_command "install_key" "Install the user's public ssh key in the created image"

iop/scripts/iopupgrade.sh

@@ -1,326 +0,0 @@
-# this is a developer helper script to install firmware on a remote host with SSH
-
-function upd_usage {
-    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
-    echo ""
-    echo "   Default host is 192.168.1.1"
-    echo "   Default firmware file is the newest one found"
-    echo "   Default is to not keep configuration"
-    echo "opts:"
-    echo ""
-    echo "	-i	Interactive use, Allows to select firmware file"
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
-}
-
-function set_config_string {
-    eval `grep $1 .config`
-}
-
-function upd_ask_ok {
-    echo "Will Continue with the following settings"
-    echo "-----------------------------------------"
-    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
-    printf "%20s: %s\n"  "Host ip" "$upd_host"
-    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    echo "-----------------------------------------"
-
-    if [ "$upd_sysupgrade" == "0" ]
-       then
-	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
-    fi
-
-    echo -n "Continue? [Y/n/q]:"
-    read answer
-
-    case $answer in
-	n|N)
-	    return 1;;
-	q|Q)
-	    exit 1;;
-	y|Y|*)
-	    return 0;;
-    esac
-}
-
-function upd_select_file {
-
-    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
-	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
-	   $((lines -10)) $((cols -5)) \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_fw="$new_file"
-	upd_fw_base=$(basename $upd_fw);
-    fi
-}
-
-function upd_select_target {
-
-    dialog --keep-tite --title "Input the name/ip number of target board" \
-	   --inputbox "Name/IP" \
-	   $((lines -10)) $((cols -5)) \
-	   "$upd_host" \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_host="$new_file"
-    fi
-}
-
-
-function upd_select_reboot {
-    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"No reboot")
-	    upd_noreboot=1
-	;;
-	"Reboot")
-	    upd_noreboot=0
-	    ;;
-    esac
-}
-
-function upd_select_config {
-    dialog --keep-tite --radiolist "Should the configuration be keept" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Keep")
-	    upd_keepconf=1
-	    ;;
-	"Default")
-	    upd_keepconf=0
-	    ;;
-    esac
-}
-
-function upd_select_forceboot {
-    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceboot=1
-	    ;;
-	"Version check")
-	    upd_forceboot=0
-	    ;;
-    esac
-}
-
-function upd_select_forceimage {
-    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceimage=1
-	    ;;
-	"Only compatible")
-	    upd_forceimage=0
-	    ;;
-    esac
-}
-
-function upd_select_sysupgrade {
-    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"iopu")
-	    upd_sysupgrade=0
-	    ;;
-	"sysupgrade")
-	    upd_sysupgrade=1
-	    ;;
-    esac
-}
-
-function upd_select {
-
-    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Firmare file" "$upd_fw_base"\
-	   "Host ip" "$upd_host" \
-	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   2> $tempfile
-
-
-    case $(cat $tempfile) in
-	"Firmare file")
-	    upd_select_file
-	    ;;
-	"Host ip")
-	    upd_select_target
-	    ;;
-	"Reboot")
-	    upd_select_reboot
-	    ;;
-	"Keep config")
-	    upd_select_config
-	    ;;
-	"Force bootloader")
-	    upd_select_forceboot
-	    ;;
-	"Force image upgrade")
-	    upd_select_forceimage
-	    ;;
-	"sysupgrade")
-	    upd_select_sysupgrade
-	    ;;
-	*)
-	    return
-	;;
-    esac
-    upd_select
-}
-function upd_select_start {
-    lines=$(tput lines)
-    cols=$(tput cols)
-    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
-    trap "rm -f $tempfile" 0 1 2 5 15
-    upd_select
-
-}
-
-function ssh_upgrade {
-    upd_noreboot=0
-    upd_forceboot=0
-    upd_keepconf=0
-    upd_forceimage=0
-    upd_fw_base=""
-    upd_fw=""
-    upd_host="192.168.1.1"
-    upd_sysupgrade=0
-    do_dialog=0
-
-    while getopts "f:hnxt:iscb" opt; do
-	case $opt in
-	    n)
-		upd_noreboot=1
-		;;
-	    x)
-		upd_forceimage=1
-		;;
-	    b)
-		upd_forceboot=1
-		;;
-	    c)
-		upd_keepconf=1
-		;;
-	    v)
-		verbose=$OPTARG
-		;;
-	    f)
-		upd_fw=$OPTARG
-		;;
-	    t)
-		upd_host=$OPTARG
-		;;
-	    i)
-		do_dialog=1
-		;;
-	    s)
-		upd_sysupgrade=1
-		;;
-	    h)
-		upd_usage
-		exit 1
-		;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -n "$upd_fw" ]
-    then
-	upd_fw_base=$(basename $upd_fw);
-    else
-	set_config_string CONFIG_TARGET_BOARD
-	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
-
-	for upd_fw_base in $firmwares
-	do
-	    #echo "firmware $upd_fw"
-	    break
-	done
-	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
-    fi
-
-    [ $do_dialog -eq 1 ] && upd_select_start
-
-    if ! upd_ask_ok
-    then
-	upd_select_start
-	if ! upd_ask_ok
-	then
-	    exit 1
-	fi
-    fi
-
-    if [ ! -f $upd_fw ]
-    then
-	echo "firmware file $firmware do not exist"
-	exit 1
-    fi
-
-    if [ $upd_sysupgrade -eq 0 ]
-    then
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
-	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
-
-	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-    else
-	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
-	    echo "sysupgrade done!"
-    fi
-}
-
-register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
-
-

iop/scripts/scp_changes.sh

@@ -1,70 +0,0 @@
-# this is a developer helper script to SCP changed files to remote host
-
-ROOT=build_dir/target-mips_uClibc-0.9.33.2/root-iopsys-brcm63xx-mips/
-ROOT_OLD=tmp/root_old/
-ROOT_TMP=tmp/root_tmp/
-
-function scp_changes_reset {
-	{ cd `dirname $0`
-		rm -rf "$ROOT_OLD"
-		mkdir -p "$ROOT_OLD"
-		cp -a "$ROOT"* "$ROOT_OLD"
-	}
-}
-
-function scp_changes {
-	if [ -z "$1" ] ; then
-		echo "usage: $0 scp_changes <host/-r(eset)/-p(retend)>"
-		echo "Error: host required"
-		exit 1
-	fi
-	{ cd `dirname $0`
-		if [ ! -d $ROOT ]; then
-			echo "$ROOT does not exist"
-			echo "please build the project first"
-			exit 1;
-		fi
-		if [ "$1" = "-r" ]; then
-			echo "reset changes"
-			scp_changes_reset
-			exit 0
-		fi
-		if [ ! -d $ROOT_OLD ]; then
-			echo "$ROOT_OLD does not exist"
-			echo "you didn't store state of previous buildroot"
-			#echo "please run ./scp_changes_reset.sh"
-			echo "doing it now"
-			scp_changes_reset
-			exit 1;
-		fi
-		FILES=`diff -rq "$ROOT" "$ROOT_OLD" 2>&1 | sed -ne "s?^Files .* and $ROOT_OLD\\(.*\\) differ?\\1?p" -ne "s?^Only in $ROOT\\(.*\\): \\(.*\\)?\\1/\\2?p"`
-		if [ "$1" = "-p" ]; then
-			echo "files that would be copied:"
-			echo $FILES
-			exit 0
-		fi
-		for f in $FILES
-		do
-			mkdir -p "$ROOT_TMP`dirname $f`"
-			cp -af "$ROOT$f" "$ROOT_TMP$f"
-		done
-		if [ -d "$ROOT_TMP" ]; then
-			echo "scp changed files to $1"
-			pushd "$ROOT_TMP" 2>&1 >/dev/null
-			scp -r * root@$1:/
-			RETVAL=$?
-			popd 2>&1 >/dev/null
-			rm -rf "$ROOT_TMP"
-			if [ "$RETVAL" -eq 0 ]; then
-				scp_changes_reset
-			else
-				echo "scp error"
-				exit $RETVAL
-			fi
-		else
-			echo "no change"
-		fi
-	}
-}
-
-register_command "scp_changes" "<host/-r(eset)/-p(retend)>  SCP only changed files to device"

iop/scripts/ssh_install_key.sh

@@ -1,17 +0,0 @@
-# this is a developer helper script to install the public ssh key on host running dropbear
-
-function ssh_install_key {
-	if [ -e ~/.ssh/id_rsa.pub ]; then
-		echo "Adding public RSA key to $1"
-		KEY=`cat ~/.ssh/id_rsa.pub`
-	elif [ -e ~/.ssh/id_dsa.pub ]; then
-		echo "Adding public DSA key to $1"
-		KEY=`cat ~/.ssh/id_dsa.pub`
-	else
-		echo "No public key found"
-		exit 1
-	fi
-	ssh root@$1 "echo '$KEY' >> /etc/dropbear/authorized_keys" && echo ok
-}
-
-register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/status.sh

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-function status {
-    topdir=$PWD
-    echo
-    for subdir in .git $(find feeds/ -type d -name .git); do
-
-	echo "======= $(dirname $subdir) ========"
-	cd $subdir/..
-	if git status |grep -Eq '^\s([^\s\(]+)'; then
-	    git status |grep -Ev '(nothing added|use "git |^$)'
-	else
-	    git status |grep -E "(On branch|HEAD detached)"
-	fi
-	cd $topdir
-    done
-    echo
-}
-
-register_command "status" "Display the state of your working tree"

iop/scripts/update_feed_branches.sh

@@ -1,61 +0,0 @@
-#!/bin/sh
-
-# Exported interface
-function update_feed_branches {
-	local release="$1"
-	local ipath="$(pwd)"
-	local branch="$2"
-	local curbranch
-
-	[ -n "$release" ] || {
-		echo "Usage: ./update_feeds <RELEASE> <BRANCH>"
-		echo ""
-		echo "If you do not give a branch as argument,"
-		echo "<RELEASE> branch will be updated to commit"
-		echo "hash given in feeds.conf for each feed repo"
-		exit 1
-	}
-
-	if [ -n "$branch" ]; then
-		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo at branch $branch"
-		if git diff-index --quiet HEAD; then
-			curbranch=`git symbolic-ref HEAD 2>/dev/null`
-			curbranch=${curbranch##refs/heads/}
-			if [ -z $curbranch ]; then
-				curbranch=`git log -1 --pretty=format:"%H"`
-			fi
-			git checkout $branch || {
-				echo "couldn't checkout branch $branch"
-				exit 99
-			}
-		else
-			echo "You have unsaved changes."
-			exit 99
-		fi
-	else
-		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo"
-	fi
-
-	ifeeds="$(grep -r feed_inteno feeds.conf  | awk '{print$2}' | cut -d'_' -f3 | tr '\n' ' ')"
-
-	for f in $ifeeds; do
-		commith=$(grep feed_inteno_$f feeds.conf | cut -d'^' -f2)
-		cd $ipath/feeds/feed_inteno_$f
-		git branch -D $release 2>/dev/null
-		echo "feed_inteno_$f: updating release branch $release to commit $commith"
-		git checkout $commith
-		git push origin :$release
-		git checkout -b $release
-		git push origin $release
-		cd $ipath
-	done
-
-	if [ -n "$branch" ]; then
-		echo "Release branch $release is updated to specific commit hash given in feeds.conf in in branch $branch for each feed repo"
-		git checkout $curbranch
-	else
-		echo "Release branch $release is updated to specific commit hash given in feeds.conf for each feed repo"
-	fi
-}
-
-register_command "update_feed_branches" "<release> [branch] Update branches in feeds from the current top level commit or specified top level branch"

iop/scripts/update_package.sh

@@ -1,644 +0,0 @@
-#!/bin/bash
-
-print_git_update()
-{
-    echo "pkg -> ${PKG_NAME}"
-    echo "	PKG_BUILD_DIR	=	${PKG_BUILD_DIR}"
-    echo "	PKG_DIR		=	${PKG_DIR}"
-    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
-    echo "	PKG_NAME	=	${PKG_NAME}"
-    echo "	PKG_SOURCE_URL	=	${PKG_SOURCE_URL}"
-    echo "	PKG_SOURCE_PROTO=	${PKG_SOURCE_PROTO}"
-    echo "	PKG_SOURCE_VERSION=	${PKG_SOURCE_VERSION}"
-    echo "	PKG_SOURCE	=	${PKG_SOURCE}"
-    echo "	PKG_SOURCE_VERSION_FILE=${PKG_SOURCE_VERSION_FILE}"
-}
-
-is_git_same()
-{
-    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
-    #echo "$PKG_NAME $git_last = ${PKG_SOURCE_VERSION}"
-    if [ "$git_last" == "${PKG_SOURCE_VERSION}" ]
-    then
-	return 0
-    fi
-    return 1
-}
-
-update_this_pkg()
-{
-    mk_hash=$(get_makefile_hash)
-
-    if [ "$mk_hash" != "${PKG_SOURCE_VERSION}" ]
-    then
-	echo "${PKG_NAME}:"
-	echo "	build dir     = ${PKG_BUILD_DIR}"
-	echo "	feed makefile = ${mk_hash}"
-	echo "	stale hash    = ${PKG_SOURCE_VERSION}"
-	echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
-	echo "	Git hash in package makefile and the git hash recorded from last compile of"
-	echo "	package is different. You probably want to recompile the package"
-	echo "	to get an up to date version in ${PKG_BUILD_DIR}/.git_update"
-	echo ""
-
-	echo -n "	Should we continue with the update anyway? [y/N]:"
-	read answer
-	echo ""
-
-	case $answer in
-	    y|Y)
-		;;
-	    n|N|*)
-		return 1;;
-	esac
-    fi
-
-    echo "${PKG_NAME}:"
-    echo "	build dir     = ${PKG_BUILD_DIR}"
-    echo "	pkg dir       = ${PKG_DIR}"
-    echo "	feed makefile = ${PKG_SOURCE_VERSION}"
-    echo "	build git     = $(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)"
-    echo "	package is at a different git commit in build compared to feed"
-    echo -n "	Should we update the feed and top project to reflect the new version ? [y/N]:"
-    read answer
-    echo ""
-
-    case $answer in
-	y|Y)
-	    return 0;;
-	*)
-	    echo ""
-	    return 1;;
-    esac
-}
-
-get_makefile_hash()
-{
-    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
-    then
-	name="$PKG_SOURCE_VERSION_FILE"
-    else
-	name=Makefile
-    fi
-    grep "PKG_SOURCE_VERSION:=" ${PKG_DIR}/${name} | sed -e "s/\(^PKG_SOURCE_VERSION:=\)\(.*\)/\2/"
-}
-
-insert_hash_in_feed_makefile()
-{
-    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
-    then
-	name="$PKG_SOURCE_VERSION_FILE"
-    else
-	name=Makefile
-    fi
-
-    git_last=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
-
-    sed -i -e "s/\(^PKG_SOURCE_VERSION:=\).*/\1${git_last}/" ${PKG_DIR}/${name}
-    (cd ${PKG_DIR}; git add ${name})
-}
-
-insert_version_in_feed_makefile()
-{
-    if [ -n "$PKG_SOURCE_VERSION_FILE" ]
-    then
-	name="$PKG_SOURCE_VERSION_FILE"
-    else
-	name=Makefile
-    fi
-
-    last_version=$(awk -F '=' '/PKG_VERSION:=/ {print $2}' ${PKG_DIR}/${name})
-
-	echo -n "please enter version: "
-	read -ei "$last_version" answer
-
-	if [ -z ${answer} ]; then
-		return
-	fi
-
-    sed -i -e "s/\(^PKG_VERSION:=\).*/\1${answer}/" ${PKG_DIR}/${name}
-    (cd ${PKG_DIR}; git add ${name})
-}
-
-
-# BUG: fix if only local branche name!
-branch_uptodate()
-{
-    # $1 git repo
-    # $2 if it exist dont abort do the pull
-    (cd $1
-     git remote update 2>&1 >/dev/null
-
-     LOCAL=$(git rev-parse @)
-     REMOTE=$(git rev-parse @{u})
-     BASE=$(git merge-base @ @{u})
-
-     if [ -z "$REMOTE" ]; then
-	 BRANCH=$(basename $(git symbolic-ref -q HEAD))
-	 echo "You need to setup a tracking branch for $BRANCH"
-	 exit 99
-     fi
-
-     if [ $LOCAL = $REMOTE ]; then
-	 return
-     elif [ $LOCAL = $BASE ]; then
-	 if [ -n "$2" ]
-	 then
-	     echo "Doing automatic pull on [ $1 ]"
-	     if git pull
-	     then
-		 return
-	     else
-		 echo "Something wrong with pull. aborting, repo at"
-		 echo "    [ $1 ]"
-		 exit 99
-	     fi
-	 else
-	     echo "Local repo behind remote:"
-	     echo "do git pull at repo"
-	     echo "    [ $1 ]"
-	     exit 99
-	 fi
-     elif [ $REMOTE = $BASE ]; then
-	 echo "Local repo ahead of remote. A push is needed"
-	 echo "Repo is at: $1"
-	 echo ""
-	 echo -n "Should we try a push ? [Y/n]:"
-	 read answer
-	 echo ""
-
-	 case $answer in
-	     n|N|q|Q)
-		 exit 99;;
-	     *)
-		 echo -e "${Yellow}"
-		 if ! git push origin HEAD
-		 then
-		     echo -e "${Color_Off}"
-		     exit 99
-		 fi
-		 echo -e "${Color_Off}Push done."
-		 ;;
-	 esac
-
-     else
-	 echo "Diverged. not sure what you did but there is no tracking branch. "
-	 echo "repo at [ $1 ]. fix it so that there is a tracking branch remote."
-	 echo "Often this is related to somebody having commited to the same branch"
-	 echo "on the server so a simple push wont work, try a 'git rebase'."
-	 exit 99
-     fi
-    )
-}
-
-on_a_branch()
-{
-    local repo=$1
-    local type=$2
-    (
-	cd $repo
-	name=$(git symbolic-ref -q HEAD)
-	if [ -z "$name" ]
-	then
-	    echo "git $type repo [ $repo ] is detached."
-
-	    branches=($(git branch -r --contains $(git rev-parse HEAD)))
-	    if [ 0 == ${#branches[@]} ]
-	    then
-		echo "It needs to be on a branch but git could not find any associated branch"
-		echo ""
-		echo "you need to make sure that the commit is not on a detached branch"
-		echo "and that the branch exist in the remote repo also. it can not be a local name"
-		echo "as it is about to get pushed so it can be part of system release"
-		exit 99
-	    fi
-
-	    echo "It needs to be on a branch. Please select one or quit if it is not in list."
-	    echo ""
-
-	    i=0
-	    for branch in ${branches[*]}
-	    do
-		echo "$i: $branch"
-		i=$((i + 1))
-	    done
-
-	    echo ""
-	    echo -n "Select what branch to checkout. Q/q or N/n to quit? "
-	    read answer
-
-	    case $answer in
-		q|Q|n|N)
-		    echo "Aborting!"
-		    exit 99;;
-	    esac
-
-	    echo -e "${Yellow}"
-	    pwd
-	    echo "git checkout ${branches[$answer]}"
-	    if ! git checkout -t ${branches[$answer]}
-	    then
-		local_branch=$(basename ${branches[$answer]})
-		if ! git checkout ${local_branch}
-		then
-		    echo -e "${Color_Off}"
-		    echo "update_git aborting! something was wrong changing to branch ${branches[$answer]}"
-		    echo "go to [ $repo ] and fix it."
-		    exit 99
-		fi
-	    fi
-	    echo -e "${Color_Off}"
-	fi
-    )
-}
-
-git_repos_uptodate()
-{
-    on_a_branch ${PKG_BUILD_DIR} package
-    on_a_branch ${PKG_DIR} feed
-    on_a_branch ${PWD} top
-    branch_uptodate ${PKG_BUILD_DIR}
-    branch_uptodate ${PKG_DIR} do_pull
-    branch_uptodate ${PWD} do_pull
-}
-
-get_feed_name()
-{
-
-    echo $1 |sed  -e "s|.*feeds/\([^/]*\).*|\1|"
-
-    # rest=$(dirname $1)
-    # base=$(basename $1)
-    # prev=$base
-
-    # while [ -n "$rest" ]
-    # do
-    # 	if [ "$base" == "feeds" ]
-    # 	then
-    # 	    echo "$prev"
-    # 	fi
-    # done
-}
-
-create_message()
-{
-    FORMAT="commit %H%n\
-Author: %aN <%aE>%n\
-Date: %ai%n\
-%n\
-%w(80,4,4)%s%n
-%b%n\
-%w()Base directory -> ${repo_PATH}/"
-    local FROM=${PKG_SOURCE_VERSION}
-    local TO=$(cd ${PKG_BUILD_DIR}; git rev-parse HEAD)
-
-    local commits=$(cd ${PKG_BUILD_DIR};git rev-list ${FROM}..${TO})
-
-    local feed=$(get_feed_name ${PKG_DIR})
-
-    echo "Update feed [ $feed ] package [ $PKG_NAME ]"
-    echo ""
-    echo "-------------------------------------------------------------------------------"
-    (cd ${PKG_BUILD_DIR}; git log --graph --oneline ${FROM}..${TO})
-    echo "-------------------------------------------------------------------------------"
-
-    for commit in $commits
-    do
-	(cd ${PKG_BUILD_DIR}; git show --stat --pretty=format:"$FORMAT"  $commit)
-	echo "-------------------------------------------------------------------------------"
-    done
-}
-
-edit_file()
-{
-    echo -en "${Red}"
-    echo "Here is the commit message we are going to use!"
-    echo "-------------------------------------------------------------------------------"
-    echo -en "${Color_Off}"
-    cat $1
-    echo -en "${Red}"
-    echo "-------------------------------------------------------------------------------"
-    echo -en "${Color_Off}"
-
-    echo -n "Do you want to edit the message [y/N]? "
-    read answer
-
-    case $answer in
-	y|Y)
-	       $EDITOR $1;;
-    esac
-}
-
-
-commit_feed()
-{
-    template=$(readlink -f $1)
-    edit_file $template
-
-    echo -e "${Yellow}"
-    (
-	cd ${PKG_DIR}
-	if git commit -F $template
-	then
-	    if git push origin HEAD
-	    then
-		echo -e "${Color_Off} Feed Updated!"
-		return
-	    else
-		echo -e "${Color_Off}"
-		echo "something wrong push feed git ${PKG_DIR}"
-		exit 99
-	    fi
-	else
-	    echo -e "${Color_Off}"
-	    echo "something wrong committing to feed git ${PKG_DIR}"
-	    exit 99
-	fi
-    )
-}
-
-commit_feeds_config()
-{
-    template=$(readlink -f $1)
-    edit_file $template
-
-    echo -e "${Yellow}"
-    if git commit -F $template
-    then
-	if git push origin HEAD
-	then
-	    echo -e "${Color_Off}Feeds.conf updated!"
-	    return
-	else
-	    echo -e "${Color_Off}"
-	    echo "something wrong push change to feeds.conf"
-	    echo "try \"git remote update ; git stash ;git rebase; git push;git stash pop\""
-	    exit 99
-	fi
-    else
-	echo -e "${Color_Off}"
-	echo "something wrong committing to feed git"
-	exit 99
-    fi
-}
-
-insert_hash_in_feeds_config()
-{
-    local feed=$(get_feed_name ${PKG_DIR})
-    local TO=$(cd ${PKG_DIR}; git rev-parse HEAD)
-
-    sed -i feeds.conf -e "/ ${feed} / s/\(.*\)[;^].*/\1^${TO}/"
-    git add feeds.conf
-}
-
-check_packages()
-{
-    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the packages."
-    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-
-    # only scan in the build directory that is currently in use.
-    CPU=$(grep  "CONFIG_CPU_TYPE=" .config| cut -f2 -d\")
-    LIBC=$(grep "CONFIG_LIBC=" .config| cut -f2 -d\")
-    
-    # First scan all files in build dir for packages that have .git directories.
-    all_pkgs=$(find build_dir/*${CPU}*${LIBC}* -name ".git")
-    
-    for pkg in `echo "$all_pkgs"`
-    do
-	pkg=$(dirname $pkg)
-
-	# check if the git in build is at same commit id as the feed makefile points out
-	if [ -e ${pkg}/.git_update ]
-	then
-	    source ${pkg}/.git_update
-	fi
-
-#	print_git_update
-
-	if [ -n "${PKG_NAME}" ]
-	then
-	    if ! is_git_same
-	    then
-		if update_this_pkg
-		then
-		    #  print_git_update
-		    git_repos_uptodate
-		    insert_hash_in_feed_makefile
-		    [ ${UPDATE} -eq 1 ] && insert_version_in_feed_makefile
-		    create_message >tmp/msg
-		    commit_feed tmp/msg
-		    insert_hash_in_feeds_config
-		    commit_feeds_config tmp/msg
-		fi
-	    fi
-	fi
-    done
-}
-
-# now handle the target git. we have only one
-
-
-feeds_hash()
-{
-    grep -v "^#" feeds.conf | grep " $1 " | grep "\^" | sed -e "s/.*[;^]\(.*\)/\1/"
-}
-
-insert_feed_hash_in_feeds_config()
-{
-    local feed=$1
-    local TO=$(cd feeds/${feed}; git rev-parse HEAD)
-
-    sed -i feeds.conf -e "/ ${feed}/ s/\(.*\)[;^].*/\1^${TO}/"
-    git add feeds.conf
-}
-
-create_feed_message()
-{
-    local feed=$1
-    local FROM=$2
-    local TO=$3
-
-    local FORMAT="commit %H%n\
-Author: %aN <%aE>%n\
-Date: %ai%n\
-%n\
-%w(80,4,4)%s%n
-%b%n\
-%w()Base directory -> feeds/$feed/"
-
-
-    local commits=$(cd feeds/$feed;git rev-list ${FROM}..${TO})
-
-    echo "Update feed [ $feed ]"
-    echo ""
-    echo "-------------------------------------------------------------------------------"
-    (cd feeds/$feed; git log --graph --oneline ${FROM}..${TO})
-    echo "-------------------------------------------------------------------------------"
-
-    for commit in $commits
-    do
-	(cd feeds/$feed; git show --stat --pretty=format:"$FORMAT"  $commit)
-	echo "-------------------------------------------------------------------------------"
-    done
-}
-
-
-
-
-check_feeds()
-{
-    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-    echo "Now checking if any changes have been done to the feeds."
-    echo -e "${Green}_______________________________________________________________________________${Color_Off}"
-
-    feeds=$(grep -v "^#" feeds.conf| awk '{print $2}')
-    for feed in `echo $feeds`
-    do
-		feed_hash=$(feeds_hash $feed)
-		if [ -d feeds/$feed ]; then
-			in_git=$(cd feeds/$feed; git rev-parse HEAD)
-
-			if [ "$feed_hash" != "$in_git" ]
-			then
-
-				name=$(cd feeds/$feed;git symbolic-ref -q HEAD)
-				if [ -z "$name" ]
-				then
-					echo "Feed feeds/${feed} is at a git commit which is different from feeds.conf"
-					#echo "git id from feeds.conf [$feed_hash] git id from feeds/${feed} [$in_git]"
-					on_a_branch feeds/${feed} feed
-
-					#redo the test here and see if the feeds.conf and git is still different.
-					in_git=$(cd feeds/$feed; git rev-parse HEAD)
-					if [ "$feed_hash" = "$in_git" ]
-					then
-						continue
-					fi
-				fi
-
-				LOCAL=$(cd feeds/$feed;git rev-parse @)
-				REMOTE=$(cd feeds/$feed;git rev-parse @{u})
-				BASE=$(cd feeds/$feed;git merge-base @ @{u})
-
-				# if we are behind the remote automatically do a pull
-				if [ $LOCAL = $BASE ]; then
-					(cd feeds/$feed ; git pull 1>/dev/null)
-
-					#redo the test here and see if the feeds.conf and git is still different.
-					in_git=$(cd feeds/$feed; git rev-parse HEAD)
-					if [ "$feed_hash" = "$in_git" ]
-					then
-						continue
-					fi
-				fi
-
-				echo "Feed feeds/${feed} is at different commit than what is in feeds.conf"
-				#echo "git id from feeds.conf [$feed_hash] git id from feeds/${feed} [$in_git]"
-				echo -n "Should we update feeds.conf to reflect the new version ? [y/N]:"
-				read answer
-
-				case $answer in
-					n|N|'')
-						continue;;
-				esac
-				branch_uptodate feeds/${feed}
-				create_feed_message ${feed} $feed_hash $in_git  >tmp/msg
-				insert_feed_hash_in_feeds_config ${feed}
-				commit_feeds_config tmp/msg
-			fi
-		fi
-    done
-}
-
-feeds_at_top()
-{
-    git remote update 2>/dev/null 1>/dev/null
-    LOCAL=$(git rev-parse @)
-    REMOTE=$(git rev-parse @{u})
-
-    if [ $LOCAL = $REMOTE ]
-    then
-	return
-    fi
-
-    local_name=$(git rev-parse --abbrev-ref @ )
-    remote_name=$(git rev-parse --abbrev-ref @{u} )
-    
-    echo "Top repo local branch \"$local_name\" is not at same point as remote \"$remote_name\""
-    echo "This update script will update the feeds.conf file and for that to work it needs to"
-    echo "be up to date with the remote."
-    echo ""
-    echo "please run:"
-    echo "  git pull"
-    echo "  ./iop feeds_update"
-    echo ""
-    echo "do not forget the bootstrap. but do not run make it can delete your package in build"
-    exit 0
-}
-
-usage(){
-	echo -e "$0 [flags]"
-	echo -e "flags:"
-	echo -e "  -v\tVerbose mode"
-	echo -e "  -h\tShow this help"
-	echo -e "  -u\tUpdate package version\n"
-}
-
-# Exported interface
-function update_package {
-
-	UPDATE=0
-
-    Color_Off='\033[0m'       # Text Reset
-
-    # Regular Colors
-    Black='\033[0;30m'        # Black
-    Red='\033[0;31m'          # Red
-    Green='\033[0;32m'        # Green
-    Yellow='\033[0;33m'       # Yellow
-    Blue='\033[0;34m'         # Blue
-    Purple='\033[0;35m'       # Purple
-    Cyan='\033[0;36m'         # Cyan
-    White='\033[0;37m'        # White
-
-    while getopts "v:hu" opt; do
-	case $opt in
-	    v)
-		verbose=$OPTARG
-		;;
-	    h)
-			usage
-			exit 1
-			;;
-		u)
-			UPDATE=1
-			;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -z "$EDITOR" ]
-    then
-	if [ -f /usr/bin/vi ]; then
-	    EDITOR=vi
-	else
-	    echo "env variable EDITOR needs to be set"
-	    exit 1
-	fi
-    fi
-
-
-    # allow subshells to abort the whole program by exiting with "exit 99"
-    set -E
-    trap '[ "$?" -ne 99 ] || exit 99' ERR
-
-    feeds_at_top
-    check_packages
-    check_feeds
-}
-
-register_command "update_package" "Publish changes to packages and feeds"