ponmngr: added documentaion files

Signed-off-by: Filip Matusiak <filip.matusiak@iopsys.eu>

ated/Makefile

@@ -1,78 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
-#
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,5 +1,3 @@
-if PACKAGE_libbbfdm
-
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -12,10 +10,6 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
-config BBF_TR181
-	bool "Enable TR-181 Data Model Support"
-	default y
-
 config BBF_TR104
 	bool "Enable TR-104 Data Model Support"
 	default y
@@ -24,4 +18,14 @@ config BBF_TR143
 	bool "Enable TR-143 Data Model Support"
 	default y
 
-endif
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default y
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default y
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255

bbf/Makefile

@@ -1,41 +1,81 @@
 #
-# Copyright (C) 2021 IOPSYS
+# Copyright (C) 2022 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=4.0.6
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_VERSION:=6.8.19
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5e72e0b9782de3978b24af0b2e80b226a35ad032
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=4e82190d88f73494dbc6d261e6eb507e348e10e3
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
-  SECTION:=libs
-  CATEGORY:=Libraries
-  SUBMENU:=BBF
-  TITLE:=Library for libbbfdm API
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
+  ABI_VERSION:=1.0
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api
 endef
 
 define Package/libbbfdm
-  SECTION:=libs
-  CATEGORY:=Libraries
-  SUBMENU:=BBF
-  TITLE:=Library for broadband-forum data model
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libmbedtls +libcurl
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/userinterface
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Package to add Device.UserInterface. datamodel support
+endef
+
+define Package/userinterface/description
+  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
 endef
 
 define Package/libbbfdm/config
@@ -57,77 +97,113 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += -DBBF_VENDOR_LIST=\\\"$(CONFIG_BBF_VENDOR_LIST)\\\"
-TARGET_CFLAGS += -DBBF_VENDOR_PREFIX=\\\"$(CONFIG_BBF_VENDOR_PREFIX)\\\"
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifeq ($(CONFIG_BBF_TR181),y)
-CONFIGURE_ARGS += \
-	--enable-tr181
-endif
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CONFIGURE_ARGS += \
-	--enable-tr104
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CONFIGURE_ARGS += \
-	--enable-tr143
-endif
-
-ifeq ($(CONFIG_PACKAGE_libopenssl),y)
-CONFIGURE_ARGS += \
-	--enable-libopenssl
-endif
-
-ifeq ($(CONFIG_PACKAGE_libmbedtls),y)
-CONFIGURE_ARGS += \
-	--enable-libmbedtls
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CONFIGURE_ARGS += \
-	--enable-vendor-extension
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
 
-CONFIGURE_ARGS += \
-	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)"
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
-define Package/libbbfdm/install
+define Package/libbbfdm/default/install
 	$(INSTALL_DIR) $(1)/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
+ifeq ($(CONFIG_PACKAGE_mosquitto-ssl),y)
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/etc/uci-defaults/01-mosquitto-config $(1)/etc/uci-defaults/
+endif
 endef
 
-define Package/libbbfdm/prerm
+define Package/libbbfdm/default/prerm
 	#!/bin/sh
-	rm -rf /etc/bbfdm/*
+	rm -rf /etc/bbfdm/dmmap/*
 	exit 0
 endef
 
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
-	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
+define Package/userinterface/install
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
+	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
+	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
+	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
+	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
 endef
 
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,userinterface))
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -0,0 +1,117 @@
+{
+	"Device.UserInterface.": {
+		"type": "object",
+		"version": "2.0",
+		"protocols": [
+			"cwmp",
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"Device.UserInterface.RemoteAccess.": {
+			"type": "object",
+			"version": "2.0",
+			"protocols": [
+				"cwmp",
+				"usp"
+			],
+			"access": false,
+			"array": false,
+			"Enable": {
+				"type": "boolean",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "enable"
+							}
+						}
+					}
+				]
+			},
+			"Port": {
+				"type": "unsignedInt",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"range": [
+					{
+						"max": 65535
+					}
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "port"
+							}
+						}
+					}
+				]
+			},
+			"SupportedProtocols": {
+				"type": "string",
+				"read": true,
+				"write": false,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"list": {
+					"datatype": "string",
+					"enumerations": [
+						"HTTP",
+						"HTTPS"
+					]
+				},
+				"default": "HTTP"
+			},
+			"Protocol": {
+				"type": "string",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "protocol"
+							}
+						}
+					}
+				]
+			}
+		}
+	}
+}

bbf/files/etc/config/userinterface

@@ -0,0 +1,6 @@
+config userinterface 'remote_access'
+	option enable '0'
+	option interface 'wan'
+	option port '80'
+	option protocol 'HTTP'
+

bbf/files/etc/firewall.userinterface

@@ -0,0 +1,88 @@
+#!/bin/sh
+
+
+#!/bin/sh
+
+. /lib/functions.sh
+
+IDENTIFIER="REMOTE-ACCESS-WAN"
+
+log() {
+	echo "${@}"|logger -t firewall.userinterface -p info
+}
+
+if [ ! -f "/etc/config/userinterface" ]; then
+	exit 0;
+fi
+
+function exec_cmd()
+{
+	if ! $@; then
+		log "Failed to run [$@]"
+	fi
+}
+
+function configure_firewall_rule()
+{
+	local enable port protocol gui_port
+	local zone interface
+
+	config_load userinterface
+	config_get_bool enable remote_access enable 1
+	config_get port remote_access port
+	config_get interface remote_access interface
+
+	if [ "${enable}" -eq "0" -o -z "${port}" -o -z "${interface}" ]; then
+		return 0;
+	fi
+
+	zone="zone_${interface}_input"
+	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+	if [ "$?" -eq 0 ]; then
+		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+	fi
+
+	zone="zone_${interface}_output"
+	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+	if [ "$?" -eq 0 ]; then
+		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+	fi
+}
+
+function delete_firewall_rule()
+{
+	local zone interface
+	local CMD
+
+	config_load userinterface
+	config_get interface remote_access interface
+
+	# Clean remote interface rules
+	if [ -z "${interface}" ]; then
+		return 0
+	fi
+
+	zone="zone_${interface}_input"
+	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
+	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+		if [ -n "${rule_num}" ]; then
+			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
+		fi
+	done
+
+	zone="zone_${interface}_output"
+	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
+	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+		if [ -n "${rule_num}" ]; then
+			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
+		fi
+	done
+}
+
+# Delete existing remote access rules
+delete_firewall_rule
+
+# Configure the User Interface rule
+configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+
+USE_PROCD=1
+
+start_service() {
+	local enable
+
+	procd_open_instance usp
+
+	config_load userinterface
+	config_get_bool enable global enable 1
+
+	# Inject firewall rules
+	if [ "${enable}" -eq "1" ]; then
+		/etc/firewall.userinterface
+	fi
+
+	procd_close_instance
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "userinterface"
+}

bbf/files/etc/uci-defaults/01-mosquitto-config

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+config_mosquitto_owrt() {
+	sec=$(uci -q get mosquitto.owrt)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto owrt)
+		uci -q rename mosquitto."${sec}"="owrt"
+	fi
+
+	uci -q set mosquitto.owrt.use_uci="1"
+	uci -q set mosquitto.owrt.write_pid="1"
+	uci -q commit mosquitto
+}
+
+config_mosquitto_general() {
+	sec=$(uci -q get mosquitto.mosquitto)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto mosquitto)
+		uci -q rename mosquitto."${sec}"="mosquitto"
+	fi
+
+	uci -q set mosquitto.mosquitto.log_dest="syslog"
+	uci -q set mosquitto.mosquitto.log_facility="5"
+	uci -q set mosquitto.mosquitto.log_timestamp="1"
+	uci -q set mosquitto.mosquitto.log_types="error warning notice"
+	uci -q set mosquitto.mosquitto.per_listener_settings="1"
+	uci -q commit mosquitto
+}
+
+config_mosquitto_persistence() {
+	sec=$(uci -q get mosquitto.persistence)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto persistence)
+		uci -q rename mosquitto."${sec}"="persistence"
+	fi
+
+	uci -q set mosquitto.persistence.persistence="0"
+	uci -q set mosquitto.persistence.location="/var/run"
+	uci -q commit mosquitto
+}
+
+if [ -f "/etc/config/mosquitto" ]; then 
+	config_mosquitto_owrt
+	config_mosquitto_general
+	config_mosquitto_persistence
+fi

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+uci -q batch <<-EOT
+        delete firewall.userinterface
+        set firewall.userinterface=include
+        set firewall.userinterface.path=/etc/firewall.userinterface
+        set firewall.userinterface.reload=1
+        commit firewall
+EOT
+
+exit 0
+

bulkdata/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2022 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,14 +8,17 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=1.0.0
+PKG_VERSION:=2.0.9
 
-PKG_SOURCE_VERSION:=4ac9d7a7e90f5de5f43d6bf3d1a844114a46b134
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-
+PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+endif
+
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
@@ -29,21 +32,24 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	BBF BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE
+	-D_GNU_SOURCE \
+	-Wall -Werror
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
+endef
+endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/config/bulkdata

@@ -1,43 +1,6 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
 	option log_level '3'
 
-config profile
-	option profile_id '1'
-	option enable '0'
-	option name ''
-	option nbre_of_retained_failed_reports '0'
-	option protocol 'http'
-	option encoding_type ''
-	option reporting_interval '86400'
-	option time_reference '0'
-	option csv_encoding_field_separator ','
-	option csv_encoding_row_separator '
'
-	option csv_encoding_escape_character '"'
-	option csv_encoding_report_format 'column'
-	option csv_encoding_row_time_stamp 'unix'
-	option json_encoding_report_format 'objecthierarchy'
-	option json_encoding_report_time_stamp 'unix'
-	option http_url ''
-	option http_username ''
-	option http_password ''
-	option http_compression 'none'
-	option http_method 'post'
-	option http_use_date_header '1'
-	option http_retry_enable '0'
-	option http_retry_minimum_wait_interval '5'
-	option http_retry_interval_multiplier '2000'
-	option http_persist_across_reboot '0'
-
-config profile_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-
-config profile_http_request_uri_parameter
-	option profile_id '1'
-	option name ''
-	option reference ''
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,7 +1,4 @@
 #!/bin/sh /etc/rc.common
-# Bulkdata Software
-# Copyright (C) 2020 iopsys Software Solutions AB
-# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
 START=99
 STOP=10
@@ -10,17 +7,17 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
-	if [ "$bulkdata_enable" = "1" ]; then
-		procd_open_instance
+	local enable
+
+	config_load bulkdata
+	config_get_bool enable bulkdata enable 1
+
+	procd_open_instance bulkdata
+	[ "$enable" -eq "1" ] && {
 		procd_set_param command "$PROG"
 		procd_set_param respawn "3" "7" "0"
-		procd_close_instance
-	fi
-}
-
-boot() {
-	start
+	}
+	procd_close_instance
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata.${section}.profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

bulut/Makefile

@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulut
+PKG_VERSION:=0.2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
+PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bulut
+	CATEGORY:=Utilities
+	DEPENDS:=
+	TITLE:=bulut
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include
+
+define Package/bulut/description
+	obuspa keys
+endef
+
+define Package/bulut/install
+	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,bulut))

crashlog/Makefile

@@ -1,40 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crashlog
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crashlog
-  CATEGORY:=Utilities
-  TITLE:=Handling kernel crash logs
-endef
-
-define Package/crashlog/description
-	Handling kernel crash logs.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/crashlog/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -1,11 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-
-start()
-{
-    if [ -e /proc/sys/kernel/core_pattern ]
-    then
-	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
-    fi
-}

crashlog/files/etc/init.d/crashlog

@@ -1,55 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-send_log()
-{
-	nr=$(db get hw.board.serial_number)
-	hw=$(db get hw.board.model_name)
-	fam=$(db get hw.board.iopVerFam)
-	sw=$(db get hw.board.iopVersion)
-	server=$(/sbin/uci get system.crashlog.server)
-
-	while true
-	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
-	    if [ $? == 0 ]
-	    then
-	       break;
-	    fi
-	    # wait for another minute then try again
-	    sleep 60
-	done
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=crashlog
-    /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
-    /sbin/uci commit
-}
-
-boot()
-{
-    # is crashlog enabled ?
-    enable=$(/sbin/uci get system.crashlog.enable)
-    case $enable in
-	0|no|NO|false|FALSE)
-	    exit 0
-	    ;;
-	"")
-	    fill_in_default
-	    exit 0
-	    ;;
-    esac
-
-    # is this boot a result from a crash ?
-    reason=$(cat /etc/boot_reason)
-    case $reason in
-	HW|WD)
-	    send_log&
-	    ;;
-    esac
-}

crashlog/files/sbin/logcore

@@ -1,60 +0,0 @@
-#! /bin/sh
-
-TMP_CORE=/tmp/new_core
-# first test if we can contact the log server.
-# if not abort directly the core file takes up memory
-alive()
-{
-	ping -c1 $server
-
-	if [ $? != 0 ]
-	then
-		# drain core file from kernel
-		cat >/dev/null
-		exit 0
-	fi
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=corelog
-    /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
-    /sbin/uci commit
-}
-
-# is corelog enabled ?
-enable=$(/sbin/uci get system.corelog.enable)
-case $enable in
-    0|no|NO|false|FALSE)
-	# drain core file from kernel
-	cat >/dev/null
-	exit 0
-	;;
-    "")
-	fill_in_default
-	exit 0
-	;;
-esac
-
-server=$(/sbin/uci get system.corelog.server)
-
-alive
-
-# dump out the core to disk we need this as scp needs a size before we send data
-# and this is the only way to know how much data there is
-cat >$TMP_CORE
-
-# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
-# more memory to work with. normally this would do nothing.
-cat >/dev/null
-
-nr=$(db get hw.board.serial_number)
-hw=$(db get hw.board.model_name)
-fam=$(hw.board.iopVerFam)
-sw=$(db get hw.board.iopVersion)
-
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
-rm $TMP_CORE
-

crashlog/files/usr/sbin/logssh

@@ -1,6 +0,0 @@
-#!/bin/sh
-# we need to have the -y option to dropbear to not halt the scp when
-# transfering the log file to a new server for the first time.
-# since we already need this also put in the keyfile
-
-ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -1,42 +0,0 @@
-Install scp server.
-
-Create a user account on a server and make sure it's possible to login to it
-using ssh.
-
-For now the user has to be called "log"
-
-USER is the user name of the account
-HOME is the user home directory.
-Both should be changed to the correct value in all following example commands.
-
-create HOME/bin
-Put scp_upload in HOME/bin
-make it executable "chmod a+x HOME/bin/scp_upload" 
-
-create home/.ssh   (observer the dot .shh)
-
-create an empty file HOME/.ssh/authorized_keys
-
--------------------------------
-Now everyhting is setup for use but we have not added any clients.
-What we need is the public key for the clients.
-
-For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
-
-----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
-----------
-
-The public key should be just one line. Add that line to the 
-HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
-the first text on the same line. that is insert before the key data.
-
-command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
-
-Do not forget to change HOME to the correct value for the server and there 
-should be one space separating the key data and the above text.
----------------------------------
-Now test to make sure that you can upload new files, not download files
-and not overwrite files from the client.
-
-

crashlog/scp_upload

@@ -1,53 +0,0 @@
-#! /bin/bash
-# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
-
-val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
-if [ $val != 3 ]
-then
-    echo "only scp is allowed for this rsa key"
-    exit 1
-fi
-
-#strip out "scp" as getopts barf on anything not an option
-
-args=${SSH_ORIGINAL_COMMAND:3}
-
-# we must set args to positional paramters otherwise it's next to impossible
-# to get to the rest of the line that is not arguments.
-
-set -- $args
-while getopts "rftdvpq" Option
-do
-  case $Option in
-    r ) echo "recursive not allowed";exit 1;;
-    f ) echo "reading files not allowed";exit 1;;
-    t ) ;;
-    d ) ;;
-    v ) ;;
-    p ) ;;
-    q ) ;;
-    * ) ;;   # Default.
-  esac
-done
-
-shift $(($OPTIND - 1))
-
-file="$*"
-dir=$(dirname "$file")
-
-if [ "$dir" != "log" ]
-then
-    echo "only allowed to write to log/"
-    exit 1
-fi
-
-# try to create uniq files
-EXTRA=$((0))
-while [ -e "${file}_${EXTRA}" ]
-do
-    EXTRA=$((EXTRA +1))
-done
-
-logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
-
-exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

crun/Makefile

@@ -1,50 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crun
-PKG_VERSION:=0.17
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/containers/crun.git
-PKG_SOURCE_VERSION:=0e9229ae34caaebcb86f1fde18de3acaf18c6d9a
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=COPYING
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crun
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+yajl +argp-standalone +libcap +libseccomp
-  TITLE:=A fast and low-memory footprint OCI Container Runtime fully written in C
-endef
-
-define Package/crun/description
-  crun conforms to the OCI Container Runtime specifications
-endef
-
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include
-TARGET_LDFLAGS += -largp
-
-MAKE_FLAGS := \
-	$(TARGET_CONFIGURE_OPTS) \
-	CFLAGS="$(TARGET_CFLAGS) $(TARGET_CPPFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)"
-	
-define Build/Configure
-	cd $(PKG_BUILD_DIR)/ && sh autogen.sh && ./configure
-endef	
-
-define Package/crun/install
-	$(INSTALL_DIR) $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/local/bin/crun $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,crun))

crun/patches/01-fix-for-openwrt-and-kernel-4-19.patch

@@ -1,217 +0,0 @@
-diff --git a/configure.ac b/configure.ac
-index 5e9f2f9..5ed99bd 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -52,16 +52,6 @@ AS_IF([test "x$enable_seccomp" != "xno"], [
- 	])
- ])
- 
--dnl libsystemd
--AC_ARG_ENABLE([systemd],
--	AS_HELP_STRING([--disable-systemd], [Ignore systemd and disable support]))
--AS_IF([test "x$enable_systemd" != "xno"], [
--	AC_CHECK_HEADERS([systemd/sd-bus.h], [], [AC_MSG_ERROR([*** Missing libsystemd headers])])
--	AS_IF([test "$ac_cv_header_systemd_sd_bus_h" = "yes"], [
--		AC_SEARCH_LIBS(sd_bus_match_signal_async, [systemd], [AC_DEFINE([HAVE_SYSTEMD], 1, [Define if libsystemd is available])], [AC_MSG_ERROR([*** Failed to find libsystemd])])
--	])
--])
--
- dnl ebpf
- AC_ARG_ENABLE([bpf],
- 	AS_HELP_STRING([--disable-bpf], [Ignore eBPF and disable support]))
-@@ -114,26 +104,6 @@ AS_IF([test "x$enable_criu" != "xno"], [
- FOUND_LIBS=$LIBS
- LIBS=""
- 
--AC_MSG_CHECKING([for new mount API (fsconfig)])
--AC_COMPILE_IFELSE(
--	[AC_LANG_SOURCE([[
--			#include <linux/mount.h>
--			int cmd = FSCONFIG_CMD_CREATE;
--		]])],
--		[AC_MSG_RESULT(yes)
--		 AC_DEFINE([HAVE_FSCONFIG_CMD_CREATE], 1, [Define if FSCONFIG_CMD_CREATE is available])],
--		[AC_MSG_RESULT(no)])
--
--AC_MSG_CHECKING([for seccomp notify API])
--AC_COMPILE_IFELSE(
--	[AC_LANG_SOURCE([[
--			#include <linux/seccomp.h>
--			int cmd = SECCOMP_GET_NOTIF_SIZES;
--		]])],
--		[AC_MSG_RESULT(yes)
--		 AC_DEFINE([HAVE_SECCOMP_GET_NOTIF_SIZES], 1, [Define if SECCOMP_GET_NOTIF_SIZES is available])],
--		[AC_MSG_RESULT(no)])
--
- AC_DEFINE([LIBCRUN_PUBLIC], [__attribute__((visibility("default"))) extern], [LIBCRUN_PUBLIC])
- AC_SUBST([FOUND_LIBS])
- AC_SUBST([CRUN_LDFLAGS])
-diff --git a/src/libcrun/cgroup.c b/src/libcrun/cgroup.c
-index 29c1f7a..77dc441 100644
---- a/src/libcrun/cgroup.c
-+++ b/src/libcrun/cgroup.c
-@@ -575,23 +575,6 @@ get_file_owner (const char *path, uid_t *uid, gid_t *gid)
-   struct stat st;
-   int ret;
- 
--#ifdef HAVE_STATX
--  struct statx stx;
--
--  ret = statx (AT_FDCWD, path, AT_STATX_DONT_SYNC, STATX_UID | STATX_GID, &stx);
--  if (UNLIKELY (ret < 0))
--    {
--      if (errno == ENOSYS || errno == EINVAL)
--        goto fallback;
--
--      return ret;
--    }
--  *uid = stx.stx_uid;
--  *gid = stx.stx_gid;
--  return ret;
--
--fallback:
--#endif
-   ret = stat (path, &st);
-   if (UNLIKELY (ret < 0))
-     return ret;
-diff --git a/src/libcrun/error.h b/src/libcrun/error.h
-index aa3f3aa..477a2fe 100644
---- a/src/libcrun/error.h
-+++ b/src/libcrun/error.h
-@@ -18,9 +18,6 @@
- #ifndef ERROR_H
- #define ERROR_H
- #include <config.h>
--#ifdef HAVE_ERROR_H
--#  include <error.h>
--#else
- #  define error(status, errno, fmt, ...)                      \
-     do                                                        \
-       {                                                       \
-@@ -35,7 +32,6 @@
-           exit (status);                                      \
-       }                                                       \
-     while (0)
--#endif
- #include <stdlib.h>
- #include <stdio.h>
- #include <stdbool.h>
-diff --git a/src/libcrun/utils.c b/src/libcrun/utils.c
-index cbde9b6..5ef7f5f 100644
---- a/src/libcrun/utils.c
-+++ b/src/libcrun/utils.c
-@@ -164,22 +164,6 @@ get_file_type_fd (int fd, mode_t *mode)
-   struct stat st;
-   int ret;
- 
--#ifdef HAVE_STATX
--  struct statx stx;
--
--  ret = statx (fd, "", AT_EMPTY_PATH | AT_STATX_DONT_SYNC, STATX_TYPE, &stx);
--  if (UNLIKELY (ret < 0))
--    {
--      if (errno == ENOSYS || errno == EINVAL)
--        goto fallback;
--
--      return ret;
--    }
--  *mode = stx.stx_mode;
--  return ret;
--
--fallback:
--#endif
-   ret = fstat (fd, &st);
-   *mode = st.st_mode;
-   return ret;
-@@ -191,22 +175,6 @@ get_file_type_at (int dirfd, mode_t *mode, bool nofollow, const char *path)
-   struct stat st;
-   int ret;
- 
--#ifdef HAVE_STATX
--  struct statx stx;
--
--  ret = statx (dirfd, path, (nofollow ? AT_SYMLINK_NOFOLLOW : 0) | AT_STATX_DONT_SYNC, STATX_TYPE, &stx);
--  if (UNLIKELY (ret < 0))
--    {
--      if (errno == ENOSYS || errno == EINVAL)
--        goto fallback;
--
--      return ret;
--    }
--  *mode = stx.stx_mode;
--  return ret;
--
--fallback:
--#endif
-   ret = fstatat (dirfd, path, &st, nofollow ? AT_SYMLINK_NOFOLLOW : 0);
-   *mode = st.st_mode;
-   return ret;
-@@ -550,22 +518,7 @@ get_file_size (int fd, off_t *size)
- {
-   struct stat st;
-   int ret;
--#ifdef HAVE_STATX
--  struct statx stx;
--
--  ret = statx (fd, "", AT_EMPTY_PATH | AT_SYMLINK_NOFOLLOW | AT_STATX_DONT_SYNC, STATX_SIZE, &stx);
--  if (UNLIKELY (ret < 0))
--    {
--      if (errno == ENOSYS || errno == EINVAL)
--        goto fallback;
--      return ret;
--    }
--  *size = stx.stx_size;
--
--  return ret;
- 
--fallback:
--#endif
-   ret = fstat (fd, &st);
-   *size = st.st_size;
-   return ret;
-@@ -1060,7 +1013,6 @@ run_process (char **args, libcrun_error_t *err)
-   _exit (EXIT_FAILURE);
- }
- 
--#ifndef HAVE_FGETPWENT_R
- static unsigned
- atou (char **s)
- {
-@@ -1126,7 +1078,6 @@ fgetpwent_r (FILE *f, struct passwd *pw, char *line, size_t size, struct passwd
-     errno = rv;
-   return rv;
- }
--#endif
- 
- int
- set_home_env (uid_t id)
-@@ -1690,29 +1641,6 @@ copy_rec_stat_file_at (int dfd, const char *path, mode_t *mode, off_t *size, dev
-   struct stat st;
-   int ret;
- 
--#ifdef HAVE_STATX
--  struct statx stx;
--
--  ret = statx (dfd, path, AT_SYMLINK_NOFOLLOW | AT_STATX_DONT_SYNC,
--               STATX_TYPE | STATX_MODE | STATX_SIZE | STATX_UID | STATX_GID, &stx);
--  if (UNLIKELY (ret < 0))
--    {
--      if (errno == ENOSYS || errno == EINVAL)
--        goto fallback;
--
--      return ret;
--    }
--
--  *mode = stx.stx_mode;
--  *size = stx.stx_size;
--  *rdev = makedev (stx.stx_rdev_major, stx.stx_rdev_minor);
--  *uid = stx.stx_uid;
--  *gid = stx.stx_gid;
--
--  return ret;
--
--fallback:
--#endif
-   ret = fstatat (dfd, path, &st, AT_SYMLINK_NOFOLLOW);
- 
-   *mode = st.st_mode;

dectmngr/Config.in

@@ -0,0 +1,11 @@
+if PACKAGE_dectmngr
+
+menu "Configuration"
+
+config ENABLE_LINE_SETTINGS_EXTENSION
+	bool "Enable Line Settings List extension "
+	default y
+
+endmenu
+
+endif

dectmngr/Makefile

@@ -8,17 +8,17 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.0.10
+PKG_VERSION:=3.5.6
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=4d137242e742cb9fc03f27f4a55182806eb0bc4e
+PKG_SOURCE_VERSION:=81450033d98fcdb68911e2148f48d190492090a6
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=GPLv2
+PKG_LICENSE:=PROPRIETARY
 PKG_LICENSE_FILES:=LICENSE
 
 RSTRIP:=true
@@ -34,29 +34,41 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
- 	DEPENDS:= +libubox +ubus
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
 endef
 
 define Package/$(PKG_NAME)/description
 	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
 endef
 
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config.in"
+endef
+
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
 	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-MAKE_FLAGS += \
-	CFLAGS+="-Wall"
+TARGET_CFLAGS += \
+	-Wall \
+        -Werror \
+	-I$(STAGING_DIR)/usr/include/libxml2
+
+ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
+TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
+endif
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
 	$(CP) ./files/etc/* $(1)/etc/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'global'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dect

@@ -1,69 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2021 OpenWrt.org
-#
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-NAME=dectmngr
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
-
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME 
-		sleep 1
-	done
-}
-
-start_service() {
-	local rfpi=
-	local opt_rfpi=
-	test $(db get hw.board.hasDect) = "0" && return
-
-	echo 1 > /sys/class/gpio/gpio14/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_rfpi="-rfpi $rfpi"
-
-	procd_open_instance
-	procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_rfpi
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	test $(db get hw.board.hasDect) = "0" && return
-
-	echo 0 > /sys/class/gpio/gpio14/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	stop_and_wait_dectmngr
-	start
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger asterisk
-}
-
-boot() {
-	echo 14 > /sys/class/gpio/export
-	echo out > /sys/class/gpio/gpio14/direction
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	start
-}
-

dectmngr/files/etc/init.d/dectmngr

@@ -0,0 +1,100 @@
+#!/bin/sh /etc/rc.common
+
+source /lib/functions/uci-defaults.sh
+
+START=70
+STOP=12
+
+USE_PROCD=1
+NAME=dectmngr
+PROG=/usr/sbin/dectmngr
+LOG_PATH=/var/log/dectmngr
+DB_PATH=/etc/dect
+
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
+
+# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
+stop_and_wait_dectmngr() {
+	pidof $NAME && killall -q $NAME
+
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
+		sleep 1
+	done
+}
+
+start_service() {
+	local opt_ext=
+	local rfpi=
+	local model_id=
+	local rxtun=
+
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+
+	rfpi=$(db -q get hw.board.dect_rfpi)
+	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
+
+	model_id=$(db -q get hw.board.dect_model_id)
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
+		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
+		model_id="30.3B.06"
+	}
+	opt_ext="$opt_ext -model $model_id"
+
+	rxtun=$(db -q get hw.board.dect_rxtun)
+	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+
+	config_load dect
+	config_get log_dect_cmbs global log_dect_cmbs syslog
+
+	procd_open_instance
+	if [ "$log_dect_cmbs" = "none" ]; then
+		echo "Starting dectmngr with cmbs logging disabled"
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
+		rm -f $LOG_PATH/*
+	elif [ "$log_dect_cmbs" = "file" ]; then
+		echo "Starting dectmngr with cmbs logging enabled to file"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
+		echo "Starting dectmngr with cmbs logging enabled to syslog"
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
+		rm -f $LOG_PATH/*
+	fi
+
+	procd_set_param respawn 6 2 3
+	procd_set_param term_timeout 20
+	procd_set_param triggers asterisk
+	procd_close_instance
+}
+
+stop_service() {
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	stop_and_wait_dectmngr
+}
+
+reload_service() {
+	ubus call dect reload
+}
+
+service_triggers()
+{
+	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
+	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+}
+
+boot() {
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
+
+	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
+	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
+	start
+}
+

dectmngr/files/lib/upgrade/keep.d/dect

@@ -0,0 +1 @@
+/etc/dect/LA_DB

dectmngr/files/scripts/load_sound_modules.sh

@@ -1,27 +0,0 @@
-#!/bin/sh
-
-SOUND_BASE=/lib/modules/$(uname -r)/kernel/sound
-SOUND_MODULES="$SOUND_BASE/soundcore.ko $SOUND_BASE/core/snd.ko $SOUND_BASE/core/snd-timer.ko"
-SOUND_MODULES="$SOUND_MODULES $SOUND_BASE/core/snd-pcm.ko $SOUND_BASE/core/snd-hwdep.ko"
-SOUND_MODULES="$SOUND_MODULES $SOUND_BASE/core/seq/snd-seq-device.ko"
-SOUND_MODULES="$SOUND_MODULES $SOUND_BASE/core/seq/snd-seq.ko $SOUND_BASE/core/snd-rawmidi.ko "
-SOUND_MODULES="$SOUND_MODULES $SOUND_BASE/usb/snd-usbmidi-lib.ko $SOUND_BASE/usb/snd-usb-audio.ko"
-
-load_sound_modules() {
-	for mod in $SOUND_MODULES; do
-		insmod $mod
-	done
-}
-
-unload_sound_modules() {
-	local modules=
-
-	# reverse the order
-	for mod in $SOUND_MODULES; do
-		modules="$mod $modules"
-	done
-
-	for mod in $modules; do
-		rmmod $mod
-	done
-}

dslmngr/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.1.0
+PKG_VERSION:=1.2.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=d17c699c1fc9588303d6da35ac2250903bf17cd8
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
@@ -26,14 +26,8 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_PLATFORM=BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-  TARGET_PLATFORM=MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -74,6 +68,10 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
+	$(CP) ./files/common/* $(1)/
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	$(CP) ./files/broadcom/* $(1)/
+endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -0,0 +1,311 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+# ATM #
+check_pvc() {
+	local vpi=$1
+	local vci=$2
+	local ret
+
+	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+check_xtm_list() {
+	local qclass=$1
+	local pcr scr mbs
+	local ret
+
+	case $# in
+		1)
+			pcr=0
+			scr=0
+			mbs=0
+		;;
+		2)
+			pcr=$2
+			scr=0
+			mbs=0
+		;;
+		4)
+			pcr=$2
+			scr=$3
+			mbs=$4
+		;;
+	esac
+
+	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_atm_device() {
+	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
+
+	config_get name $1 name "ATM"
+	config_get vpi $1 vpi "8"
+	config_get vci $1 vci "35"
+	config_get device $1 device "atm0"
+	config_get link_type $1 link_type "eoa"
+	config_get encapsulation $1 encapsulation "llc"
+	config_get qos_class $1 qos_class "ubr"
+	config_get pcr $1 pcr
+	config_get mbs $1 mbs
+	config_get scr $1 scr
+
+	check_pvc $vpi $vci
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret=$?
+
+		if [ "$ret" -eq 0 ]; then
+			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+				ubr)
+					xtmctl operate tdte --add "$qos_class"
+				;;
+				ubr_pcr|ubr+)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				cbr)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				nrtvbr|vbr-nrt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				rtvbr|vbr-rt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				gfr)
+				;;
+				abr)
+				;;
+			esac
+		fi
+
+		case $link_type in # EoA, IPoA, PPPoA, CIP
+			EoA|eoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
+			;;
+			PPPoA|pppoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
+			;;
+			IPoA|ipoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
+			;;
+			CIP|cip)
+			;;
+		esac
+
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret="$?"
+
+		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
+		done
+		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_atm_devices() {
+	local vpi vci rest
+	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
+
+	for i in $vpivci
+	do
+		rest=${i#\/}
+		vpi=${rest%%\/*}
+		vci=${rest#*\/}
+		echo "xtmctl operate conn --delete 1.$vpi.$vci"
+		xtmctl operate conn --delete 1.$vpi.$vci
+		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
+		xtmctl operate conn --deletenetdev 1.$vpi.$vci
+	done
+}
+
+create_atm_devices() {
+	echo "Creating ATM Device(s)"
+	config_load dsl
+	config_foreach configure_atm_device atm-device
+}
+# ATM END #
+
+# PTM #
+check_ptm() {
+	local ret
+	local ptmprio=$1
+	local dslat=$2
+
+	if [ "$ptmprio" -eq 2 ]; then
+		ptmprio="high"
+	else
+		ptmprio="low"
+	fi
+
+	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_ptm_device() {
+	local name device priority portid i
+
+	config_get name $1 name "PTM"
+	config_get device $1 device "ptm0"
+	config_get priority $1 priority 1
+	config_get portid $1 portid 1
+
+	check_ptm $priority $portid
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		xtmctl operate conn --add $portid.$priority
+
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
+		done
+		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
+		xtmctl operate conn --createnetdev $portid.$priority $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_ptm_devices() {
+	local delptm
+	local x=0
+
+	IFS=$'\n'
+	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
+	do
+		if [ $x -eq 1 ]; then
+			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
+			echo "xtmctl operate conn --delete $delptm"
+			xtmctl operate conn --delete $delptm
+			xtmctl operate conn --deletenetdev $delptm
+		fi
+		x=1
+	done
+	unset IFS
+}
+
+create_ptm_devices() {
+	echo "Creating PTM Device(s)"
+	config_load dsl
+	config_foreach configure_ptm_device ptm-device
+}
+# PTM END #
+
+prioritize_arp()
+{
+      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+}
+
+xtm_remove_devices() {
+	remove_atm_devices
+	remove_ptm_devices
+}
+
+xtm_create_devices() {
+	local tpstc="$(xdslctl info --show | grep TPS-TC)"
+	if echo "$tpstc" | grep -q "ATM Mode"; then
+		create_atm_devices
+	elif echo "$tpstc" | grep -q "PTM Mode"; then
+		create_ptm_devices
+	fi
+}
+
+xdsl_configure() {
+	local VDSL=0
+	local GFAST=0
+	local mod=""
+	local modes=""
+	local profile=""
+
+	config_load dsl
+
+	# Modes
+	config_get mode line mode
+	for mod in $mode; do
+		[ $mod == "gdmt" ] && modes="${modes}d"
+		[ $mod == "glite" ] && modes="${modes}l"
+		[ $mod == "t1413" ] && modes="${modes}t"
+		[ $mod == "adsl2" ] && modes="${modes}2"
+		[ $mod == "adsl2p" ] && modes="${modes}p"
+		[ $mod == "annexl" ] && modes="${modes}e"
+		[ $mod == "annexm" ] && modes="${modes}m"
+		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
+		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
+	done
+
+	# VDSL Profiles
+	config_get profile line profile
+	# Capabilities
+	config_get_bool bitswap line bitswap 1
+	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
+	config_get_bool sra line sra 1
+	[ $sra -eq 1 ] && sra="on" || sra="off"
+#	config_get_bool trellis line trellis 1
+	config_get_bool sesdrop line sesdrop 0
+	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
+	# VDSL2 only
+	config_get_bool us0 line us0 1
+	[ $us0 -eq 1 ] && us0="on" || us0="off"
+#	config_get_bool dynamicd line dynamicd 1
+#	config_get_bool dynamicf line dynamicf 1
+	config_get_bool sos line sos 0
+	[ $sos -eq 1 ] && sos="on" || sos="off"
+
+	config_get_bool phyReXmtUs line phyReXmtUs 0
+	config_get_bool phyReXmtDs line phyReXmtDs 1
+	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
+
+	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
+		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	else
+		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+	fi
+
+	if [ $GFAST -eq 1 ]; then
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	fi
+}
+
+xdsl_stop() {
+	# echo "Stopping DSL"
+	# stop causes IRQ issues
+	# xdslctl stop
+	return 0
+}
+
+xdsl_init() {
+	prioritize_arp
+
+	echo "Starting DSL"
+
+	xtmctl start
+	xtmctl operate intf --state 1 enable
+}

dslmngr/files/common/etc/config/dsl

@@ -0,0 +1,53 @@
+# OEM specific parameters
+config oem-parameters 'oem'
+#	option country_code "0000"   # 2 bytes hex
+#	option vendor_id "IO"        # 4 bytes string
+#	option vendor_suffix "0000"  # 2 bytes hex
+#	option sw_version "iopsys"   # 16 bytes string
+#	option serial_nr "00000000"  # 32 bytes string
+
+# DSL Modes
+config dsl-line line
+	list mode gdmt
+	list mode glite
+	list mode t1413
+	list mode adsl2
+	list mode adsl2p
+	list mode annexl
+	list mode annexm
+	list mode vdsl2
+	# VDSL2 profiles
+	list profile 8a
+	list profile 8b
+	list profile 8c
+	list profile 8d
+	list profile 12a
+	list profile 12b
+	list profile 17a
+	list profile 30a
+	option bitswap 1
+	option sra 1
+	option us0 1 # VDSL2 only
+	option sesdrop 0
+	option sos 0
+	option phyReXmtUs 0
+	option phyReXmtDs 1
+
+config atm-device atm0
+	option name 'ATM'
+	option vpi '8'
+	option vci '35'
+	option device atm0
+	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
+	option encapsulation 'llc' # llc, vcmux
+	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+#	option pcr '512'
+#	option scr '256'
+#	option mbs '1024'
+
+config ptm-device ptm0
+	option name 'PTM'
+	option device 'ptm0'
+	option priority '1'
+	option portid '1'
+

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -0,0 +1,7 @@
+[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
+
+. /lib/functions.sh
+include /lib/dsl
+
+xtm_remove_devices
+xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -0,0 +1,7 @@
+if [ "$STATUS" == "up" ]; then
+	ubus call led.dsl set '{"state":"ok"}'
+elif [ "$STATUS" == "down" ]; then
+	ubus call led.dsl set '{"state":"off"}'
+elif [ "$STATUS" == "training" ]; then
+	ubus call led.dsl set '{"state":"alert"}'
+fi

dslmngr/files/common/etc/init.d/dsl

@@ -0,0 +1,48 @@
+#!/bin/sh /etc/rc.common
+
+. /lib/functions.sh
+include /lib/dsl
+
+START=20
+USE_PROCD=1
+
+DSLMNGR=$(which dslmngr)
+
+start_service() {
+	[ -n "$DSLMNGR" ] && {
+		procd_open_instance
+		procd_set_param command "$DSLMNGR"
+		procd_set_param respawn
+		procd_close_instance
+	}
+
+	xdsl_configure
+	xtm_create_devices
+}
+
+stop_service() {
+	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
+
+	xtm_remove_devices
+	xdsl_stop
+}
+
+boot() {
+	local HASADSL="$(db -q get hw.board.hasAdsl)"
+	local HASVDSL="$(db -q get hw.board.hasVdsl)"
+	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
+
+	xdsl_init
+
+	start
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger dsl
+}
+

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
+  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
 endef
 
 define Package/easy-qos/description
@@ -39,11 +39,7 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-ifeq ($(CONFIG_TARGET_intel_mips),y)
-	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
-else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -1,301 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-RULE_LIST="/tmp/easy_qos_rule.list"
-CLIENT_LIST="/tmp/easy_qos_class_client.list"
-BRIDGE_INTF=""
-
-[ -f /etc/profile.d/intel.sh ] && {
-	. /etc/profile.d/intel.sh
-	sh /etc/profile.d/intel.sh
-}
-
-log() {
-	echo "${@}"|logger -t easy_qos_class -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-exec_class_log() {
-	${@} |grep -i successful
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-		return 1
-	fi
-	return 0
-}
-
-get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo 8;;
-		"low")
-			echo 7;;
-		"besteffort")
-			echo 6;;
-		"normal")
-			echo 5;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 3;;
-		"high")
-			echo 2;;
-		"highest")
-			echo 1;;
-	esac
-}
-
-get_mark() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
-	case "${prio}" in
-		"lowest")
-			echo "0x41/0x3df";;
-		"low")
-			echo "0x82/0x3df";;
-		"besteffort")
-			echo "0xc3/0x3df";;
-		"normal")
-			echo "0x104/0x3df";;
-		"video")
-			echo "0x145/0x3df";;
-		"medium")
-			echo "0x186/0x3df";;
-		"high")
-			echo "0x1c7/0x3df";;
-		"highest")
-			echo "0x208/0x3df";;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_ip_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j EXTMARK --set-mark ${mark}";
-	if [ "${proto}" != "icmp" ]; then
-		if [ -n "${ports}" ]; then
-			cmd="--match multiport --dports ${ports} ${cmd}";
-		fi
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd}
-}
-
-is_lan_bridge() {
-	local _section=$1
-	local _type
-	local _is_lan
-
-	config_get _type "$section" "type"
-	config_get _is_lan "$section" "is_lan"
-
-	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
-		BRIDGE_INTF="br-${_section}"
-	fi
-}
-
-get_bridge_interface() {
-	config_load network
-	config_foreach is_lan_bridge interface
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	# execute the delete rules written onto a file then delete the file
-	[ -f ${RULE_LIST} ] || return 0
-
-	while read line
-	do
-		log "Deleting old classification rules"
-		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
-	done <${RULE_LIST}
-
-	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
-	done
-	sync
-
-	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
-}
-
-# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
-create_rule() {
-	local proto=$1; shift
-	local mac_addr=$1; shift
-	local mark=$1; shift
-	local ports=$1;
-	local cmd="";
-	# Rule name is uniqe, so we take hash of all the input as rule_name
-	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
-
-	cmd="-j mark --mark ${mark}";
-
-	if [ "${mac_addr}" != "none" ]; then
-		cmd="--smac ${mac_addr} ${cmd}";
-	fi
-
-	if [ "${proto}" != "icmp" ]; then
-		if [ "${ports}" != "none" ]; then
-			IFS=","
-			for port in ${ports};
-			do
-				cmd="--dport ${port}:${port} ${cmd}";
-			done
-			IFS=' '
-		fi
-	fi
-	if [ "${proto}" != "none" ]; then
-		cmd="-p ${proto} $cmd"
-	fi
-	cmd="-i ${BRIDGE_INTF} $cmd"
-	cmd="-A ${rule_name} $cmd"
-
-	# Store the rule_names for cleanup on reload
-	exec_class_log classcfg ${cmd}
-	[ $? -eq 0 ] && \
-		echo ${rule_name}  >> ${RULE_LIST}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num port_list ip ipmark
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-	ipmark=$(get_mark ${priority})
-	ip=$(get_ipaddress ${macaddr})
-
-	if [ -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${macaddr} ${prio_num} ${port_list}
-			create_rule udp ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
-				create_ip_rule udp ${ip} ${ipmark} ${port_list}
-			fi
-		else
-			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
-			if [ -n "${ip}" ]; then
-				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	get_bridge_interface
-	map_client_entries
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
-	reload_service
-	log "Easy QoS class installed"
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos" "network"
-}
-

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr [A-Z] [a-z])
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr [A-Z] [a-z]);
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
 	case "${prio}" in
 		"lowest")
 			echo 0;;

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+ifneq ($(CONFIG_TARGET_brcmbca),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
+ifneq ($(CONFIG_TARGET_brcmbca),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=6.2.1
+PKG_VERSION:=7.2.7
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5521e398fd26f76a080c90b4975a649597564bba
+PKG_SOURCE_VERSION:=3d6d1347668408e77c327ddf81602e70af8b3d98
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -36,44 +36,66 @@ define Package/easy-soc-libs
   MENU:=1
 endef
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
+ifeq ($(CONFIG_TARGET_brcmbca),y)
   TARGET_PLATFORM=BROADCOM
+  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
 else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
   TARGET_PLATFORM=MEDIATEK
-  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-  TARGET_PLATFORM=MARVELL
-  TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_airoha),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_ipq95xx),y)
+  TARGET_PLATFORM=IPQ95XX
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIPQ95XX
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
+  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
 export TARGET_PLATFORM
+export TARGET_WIFI_TYPE
 
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
 	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
 	$(if $(CONFIG_PACKAGE_libqos),libqos)
 
-EASY_SOC_LIBS := \
+ifneq ($(CONFIG_PACKAGE_libwifi),)
+TARGET_CFLAGS +=-DHAS_WIFI
+endif
+
+esl-pkgs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+esl-pkgs-all := \
 	libeasy \
+	libwifiutils \
 	libwifi \
 	libdsl \
 	libethernet \
@@ -93,6 +115,7 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)
@@ -122,15 +145,15 @@ define Build/Compile
 	$(Build/Compile/rebuild)
 	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
 	$(call Build/Compile/Default)
-	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
+	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
 endef
 
 define Build/InstallDev
-	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
 endef
 
 define Package/easy-soc-libs/install
 	:
 endef
 
-$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))
+$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -1,10 +1,7 @@
 
 define Package/libdsl
   $(call Package/easy-soc-libs)
-  TITLE:= XDSL library (libdsl)
-  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx \
-	   +TARGET_intel_mips:dsl-cpe-fapi \
-	   +TARGET_intel_mips:kmod-ppa-drv
+  TITLE:= xDSL library (libdsl)
 endef
 
 define Package/libdsl/config

easy-soc-libs/easy.mk

@@ -18,6 +18,7 @@ define Build/InstallDev/libeasy
 	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
 	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
 endef
 

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_airoha:ecnt_api
 endef
 
 define Package/libethernet/config

easy-soc-libs/qos.mk

@@ -16,7 +16,7 @@ endef
 define Build/InstallDev/libqos
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
 endef
 

easy-soc-libs/wifi.mk

@@ -1,29 +1,49 @@
 
+define Package/libwifiutils
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi utility library (libwifiutils.so)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Build/InstallDev/libwifiutils
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifiutils/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
+  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
 endef
 
 define Package/libwifi/config
-  if PACKAGE_libdsl
+  if PACKAGE_libwifi
 	  config LIBWIFI_DEBUG
 		depends on PACKAGE_libwifi
 		bool "Enable wifi debugging"
 		default n
-
   endif
 endef
 
+
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
 endef
 
 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
 endef
-

endptmngr/Makefile

@@ -6,27 +6,21 @@
 #
 include $(TOPDIR)/rules.mk
 
-PKG_RELEASE:=1
-PKG_VERSION:=0.4
-PKG_SOURCE_VERSION:=510b885c049b8ba06772dae59e64b370d0fded3e
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=https://download.iopsys.eu/iopsys/opensdk/
-PKG_NAME:=endptmngr-open
-PATCH_DIR:=
-PKG_HASH:=skip
-else
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_PROTO:=git
 PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -34,15 +28,10 @@ PKG_BUILD_PARALLEL:=1
 
 # All config variable that are passed to the make invocation, directly or
 # indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS := \
-	CONFIG_TARGET_BOARD
-
-export CONFIG_BRCM_SDK_VER_504001
-export CONFIG_BRCM_SDK_VER_504002
-export CONFIG_BRCM_SDK_VER_504003
-export CONFIG_BRCM_SDK_VER_504004
-export CONFIG_BRCM_SDK_VER_504005
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
+export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -52,7 +41,7 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Brcmslic
+  TITLE:=Broadcom Voice Endpoint Manager
   URL:=
   DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
 endef
@@ -61,18 +50,19 @@ define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
 endef
-
 endif
 
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
 
 define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.0.1
+PKG_VERSION:=2.1.0
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,10 +37,24 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+define Build/Compile
+endef
+endif
+
 define Package/ethmngr/install
-	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
+	$(CP) ./files/common/* $(1)/
+ifneq ($(CONFIG_TARGET_brcmbca),)
+	$(CP) ./files/broadcom/* $(1)/
+else ifneq ($(CONFIG_TARGET_airoha),)
+	$(CP) ./files/airoha/* $(1)/
+else
+	$(CP) ./files/linux/* $(1)/
+endif
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
+endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -0,0 +1,208 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+unset -f switchmgr
+# alias for switchmgr
+switchmgr() {
+	"/userfs/bin/switchmgr" "$@"
+}
+
+unset -f tc3162_get_lan_port
+# get lan port port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_lan_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+
+	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
+	case "${ifname}" in
+	eth0.*)
+		;;
+	*)
+		logger -t "port-management" \
+		"unsupported - ${ifname} is not tc3162 switch port"
+		return 255
+		;;
+	esac
+
+	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
+	[[ -z "${if_idx}" ]] && return 255
+	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
+		logger -t "port-management" \
+		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
+		return 255
+	}
+	let "if_idx=${if_idx}-1"
+	return ${if_idx}
+}
+
+
+unset -f tc3162_get_mapped_port
+# get mapped switch port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_mapped_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+	local prtmap_procfile="/proc/tc3162/eth_portmap"
+	local lan_prt=255
+	local port=255
+	local prtmap_out_line_num=4
+	local prtmap_out_line=""
+	
+	# check "lan port map" marker in portmap output string
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
+
+	tc3162_get_lan_port "${ifname}"
+	let "if_idx=$?"
+	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
+
+	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
+	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+
+	# get and check lan port index from lan portmapping string
+	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
+	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
+
+	# get and check mapped port from lan portmapping string
+	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
+	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
+
+	return ${port}
+}
+
+unset -f get_max_port_speed
+# arg1: port ifname, ex: eth0.1
+get_max_port_speed() {
+	[[ -z "$1" ]] && { echo 0; return; }
+
+	local ifname="$1"
+	local port=255
+	local speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	# tc3162 capability for all ports is 1Gbps
+	speed=1000
+
+	echo $speed
+}
+
+unset -f power_updown
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+power_updown() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local port=255
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	switchmgr phy admin "${port}" "${enabled}"
+}
+
+unset -f set_port_settings
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: 0/1/off/on/..
+# arg6: port eee, ex: 0/1/off/on/..
+# arg7: port pause, ex: 0/1/off/on/..
+set_port_settings() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+	[[ -z "$3" ]] && return
+	[[ -z "$4" ]] && return
+	[[ -z "$5" ]] && return
+	[[ -z "$6" ]] && return
+	[[ -z "$7" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local speed="$3"
+	local duplex="$4"
+	local autoneg=$5
+	local eee="$6"
+	local pause="$7"
+	local port=255
+	local speedmode=1
+	local last_speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+	
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	let "autoneg=$(get_bool "${autoneg}" "-1")"
+	[[ ${autoneg} -eq -1 ]] && return
+
+	let "eee=$(get_bool "${eee}" "-1")"
+	[[ ${eee} -eq -1 ]] && return
+	
+	let "pause=$(get_bool "${pause}" "-1")"
+	[[ ${pause} -eq -1 ]] && return
+	
+	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
+	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+	
+	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
+	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
+		&& last_speed=${speed}
+	
+	switchmgr phy pause "${port}" "${pause}"
+
+	# set speedmode: speed+duplex+autoneg
+# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
+	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
+		switchmgr phy speedmode ${port} "1"
+	else
+		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
+		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
+		switchmgr phy speedmode "${port}" "${speedmode}"
+	fi
+	
+# TODO: implement MAC control register manipulations (mapped ports used) for
+	# eee settings change
+	# separate (tx/rx) pause (flow control) settings change
+	# set speed to 1Gbps separately from autoneg mode
+	
+# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
+	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
+
+	power_updown "${ifname}" ${enabled}
+
+}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -0,0 +1,140 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
+	local speed=1000
+
+	case "$phycap" in
+		10GFD) speed=10000 ;;
+		5GFD) speed=5000 ;;
+		2.5GFD) speed=2500 ;;
+		1GFD|1GHD) speed=1000 ;;
+		100MFD|100MHD) speed=100 ;;
+		10MFD|10MHD) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port name, ex: eth0
+get_port_number() {
+	[ -z "$1" ] && return
+	local ports="0 1 2 3 4 5 6 7"
+	local units="0 1"
+	local port="$1"
+	local ifname
+
+	for unit in $units; do
+		for prt in $ports; do
+			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
+			if [ "$ifname" == "$port" ]; then
+				echo "$unit $prt"
+				return
+			fi
+		done
+	done
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ethctl $ifname phy-power $updown >/dev/null
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	local unitport="$(get_port_number $ifname)"
+	local unit=$(echo $unitport | cut -d ' ' -f 1)
+	local port=$(echo $unitport | cut -d ' ' -f 2)
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	[ "$duplex" == "half" ] && duplex=0 || duplex=1
+	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
+	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
+
+	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
+	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
+	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
+	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
+
+	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
+	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
+
+	if [ "$numofcaps" == "1" ]; then
+		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
+	else
+		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
+		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
+	fi
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+	if [ "$auto" == "on" ]; then
+		# Use ethswctl utility to set pause autoneg
+		# as ethtool is not setting it properly
+		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
+	else
+		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+	fi
+
+	power_updown $ifname $enabled
+}

ethmngr/files/common/etc/init.d/ethmngr

@@ -1,12 +1,15 @@
 #!/bin/sh /etc/rc.common
 
 START=15
+STOP=90
+
 USE_PROCD=1
+PROG=/usr/sbin/ethmngr
 
 . /lib/functions.sh
-include /lib/network
+include /lib/ethernet
 
-configure_ports(){
+configure_ethernet_port(){
 	local cfg=$1
 	local ifname enabled speed duplex autoneg eee pause
 
@@ -24,11 +27,22 @@ configure_ports(){
 }
 
 start_service() {
-	[ -f /lib/network/port.sh ] || return
+	if [ -s /etc/config/ports ]; then
+		config_load ports
+		config_foreach configure_ethernet_port ethport
+	fi
 
-	config_load ports
-	config_foreach configure_ports ethport
-	config_foreach configure_ports sfpport
+	if [ -f $PROG ]; then
+		procd_open_instance
+		procd_set_param command ${PROG}
+		procd_set_param respawn
+		procd_close_instance
+	fi
+}
+
+reload_service() {
+        stop
+        start
 }
 
 service_triggers() {

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+populate_config_from_db() {
+	. /lib/functions.sh
+	. /lib/network/utils.sh
+	include /lib/ethernet
+
+	portorder="$(db -q get hw.board.ethernetPortOrder)"
+	for port in $portorder; do
+		speed="$(get_max_port_speed $port 2>/dev/null)"
+		speed="${speed:-1000}"
+
+		uci add ports ethport
+		uci rename ports.@ethport[-1]="$(get_port_name $port)"
+		uci set ports.@ethport[-1].enabled=1
+		uci set ports.@ethport[-1].name="$(get_port_name $port)"
+		uci set ports.@ethport[-1].ifname="$port"
+		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].duplex="full"
+		uci set ports.@ethport[-1].autoneg=1
+		uci set ports.@ethport[-1].eee=0
+		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
+			uci set ports.@ethport[-1].pause=1
+			uci set ports.@ethport[-1].uplink=1
+		else
+			uci set ports.@ethport[-1].pause=0
+		fi
+	done
+
+	uci commit ports
+}
+
+populate_config_from_device_tree() {
+	for path in $(find /proc/device-tree/ -name "port@*"); do
+		port="$(cat $path/label)"
+		[ -n "$port" ] || continue
+		[ "$port" = "cpu" ] && continue
+		speed=1000
+		if [ -e "$path/phy-mode" ]; then
+			phymode="$(cat $path/phy-mode)"
+			case "$phymode" in
+				10000*) speed=10000 ;;
+				2500*) speed=2500 ;;
+			esac
+		fi
+		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
+		uci add ports ethport
+		uci rename ports.@ethport[-1]="$PORT"
+		uci set ports.@ethport[-1].enabled=1
+		uci set ports.@ethport[-1].name="$PORT"
+		uci set ports.@ethport[-1].ifname="$port"
+		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].duplex="full"
+		uci set ports.@ethport[-1].autoneg=1
+		uci set ports.@ethport[-1].eee=0
+		if [ "$port" = "wan" ]; then
+			uci set ports.@ethport[-1].pause=1
+			uci set ports.@ethport[-1].uplink=1
+		else
+			uci set ports.@ethport[-1].pause=0
+		fi
+	done
+	uci commit ports
+}
+
+if [ -s "/etc/config/ports" ]; then
+	if uci -q get ports.@ethport[0] >/dev/null; then
+		# exit if there is any valid content
+		exit 0
+	else
+		rm -f /etc/config/ports
+	fi
+fi
+
+touch /etc/config/ports
+
+if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
+	populate_config_from_db
+elif [ -d /proc/device-tree/ ]; then
+	populate_config_from_device_tree
+fi

ethmngr/files/ethmngr.init

@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=95
-STOP=10
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	procd_set_param respawn
-	procd_close_instance
-}
-
-reload_service() {
-        stop
-        start
-}

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -0,0 +1,95 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
+	local speed=1000
+
+	case "$phycap" in
+		10000*) speed=10000 ;;
+		5000*) speed=5000 ;;
+		2500*) speed=2500 ;;
+		1000*) speed=1000 ;;
+		100*) speed=100 ;;
+		10*) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ip link set dev $ifname $updown
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+
+	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+
+	power_updown $ifname $enabled
+}

evoice/Makefile

@@ -0,0 +1,106 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.39
+
+LOCAL_DEV=0
+LOCAL_DEV_EVOICE_DIR=~/voip/evoice
+
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
+		+TARGET_brcmbca:bcmkernel\
+		+TARGET_airoha:kmod-voip_driver\
+		+TARGET_airoha:voip_app +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+define Build/Prepare
+	@echo "======================================================="
+	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
+	@echo "======================================================="
+	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+IDIR = $(STAGING_DIR)/usr/include
+TONES_INI_REQUIRED=
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	TARGET_PLATFORM=BROADCOM
+	BDIR = bcm963xx/userspace/private/apps/voice
+	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
+		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
+		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+	TRG=SVrgBcmFxs
+	JSONFILE=codecs_brcm.json
+else ifeq ($(CONFIG_TARGET_airoha),y)
+	TARGET_PLATFORM=ECONET
+	TONES_INI_REQUIRED=y
+	TRG=SVrgMtekOwrt
+	JSONFILE=codecs_airoha.json
+endif
+
+# disable temporarily some not important warnings, force PIC
+CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
+
+export TARGET_PLATFORM
+
+#used and altered by BIDE makefiles
+export _XFLAGS
+
+BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
+	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
+
+	@echo "clean libvoiceservice before building shared lib!"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
+	$(RM) $(1)/lib/voice/codecs_brcm.json
+	$(RM) $(1)/lib/voice/codecs_airoha.json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,334 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option AcceptFromProxyOnly '0'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	option SIPSessionTimerEnable '0'
+	option SIPSessionExpireInterval '1800'
+	option SIPSessionMinimumTimer '90'
+	option SIPSessionRefresher 'NONE'
+	option SIPSessionTimerMode 'REQUEST'
+	option SIPSessionRefreshRequest 'UPDATE'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'G.711ALaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'G.711MuLaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'G.726'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'G.722'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'G.729'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '0'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '2PrefixInfo1'
+	list PrefixList '2PrefixInfo2'
+	list PrefixList '2PrefixInfo3'
+	list PrefixList '2PrefixInfo4'
+	list PrefixList '2PrefixInfo5'
+	list PrefixList '2PrefixInfo6'
+	list PrefixList '2PrefixInfo7'
+	list PrefixList '2PrefixInfo8'
+	list PrefixList '2PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '3PrefixInfo1'
+
+config PrefixInfo '2PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,181 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option HW_VoiceDSP 'hw.board.VoiceDSP'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable                'voice.Network@.Enable'
+   option Registration_Server   'voice.Network@.RegistrarServer'
+   option Outbound_Proxy        'voice.Network@.ProxyServer'
+   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
+   option SIP_Port              'voice.Network@.RegistrarServerPort'
+   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
+   option T1                    'voice.Network@.TimerT1'
+   option UserAgentDomain       'voice.Network@.UserAgentDomain'
+   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
+   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
+   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
+   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
+   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
+   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config fxsinfo 'map_fxs'
+   option Enable 'voice.FXS@.Enable'
+   option DialType 'voice.FXS@.DialType'
+   option TransmitGain 'voice.FXS@.TransmitGain'
+   option ReceiveGain  'voice.FXS@.ReceiveGain'
+   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,56 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+

evoice/files/etc/init.d/evoice

@@ -0,0 +1,32 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=evoice
+VOICE_UCI_CONFIG=voice
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+
+	which endptmngr >/dev/null 2>&1 && {
+		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
+		return
+	}
+
+	procd_open_instance
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger $VOICE_UCI_CONFIG
+}

evoice/files/lib/voice/codecs_airoha.json

@@ -0,0 +1,50 @@
+{
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	]
+}
+

evoice/files/lib/voice/codecs_brcm.json

@@ -0,0 +1,140 @@
+{
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 16000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 40000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.723.1": [
+		{
+			"BitRate": 5300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"iLBC": [
+		{
+			"BitRate": 15200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 13300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 10200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7950,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6700,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5900,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5150,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 4750,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-EFR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-FR": [
+		{
+			"BitRate": 13200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-HR": [
+		{
+			"BitRate": 5600,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	]
+}
+

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=152a2d96fea896c1607bd5259e3076750693dd59
+PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
@@ -38,9 +38,6 @@ define Package/$(PKG_NAME)/description
 	Command to extract sub images from FIT images.
 endef
 
-MAKE_FLAGS += \
-	CFLAGS+="-Wall"
-
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 

gryphon-led-module/Makefile

@@ -28,6 +28,7 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  DEPENDS:= +(TARGET_brcmbca):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -40,6 +41,33 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
+	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
+	# and abcdef the git-commit.
+	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
+	# The assignment below removes the part after the - which puts modules in the right directory as
+	# long as the bcmlinux version matches the kernel version in the BCM SDK.
+	# So, this will only stop working in the time window where the BCM SDK has been updated
+	# but bcmlinux has not yet been updated.
+	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
+		# These targets use a 32-bit arm-sfp kernel
+		LINUX_KARCH:=arm
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
+
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -43,10 +43,15 @@
 static ssize_t get_led_color(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	/* [ln] todo: dummy implementation */
 	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
 
-	len = scnprintf(buf, PAGE_SIZE, "%d\n", 123);
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
 		return -EIO;

icwmp/Config_cwmp.in

@@ -1,23 +0,0 @@
-if PACKAGE_icwmp
-
-choice
-	prompt "Select ACS sever"
-	default CWMP_ACS_MULTI
-
-config CWMP_ACS_MULTI
-	bool "No specific ACS, follow standard"
-
-config CWMP_ACS_HDM
-	bool "HDM"
-endchoice
-
-config CWMP_DEBUG
-	bool "Compile with debug options"
-	default y
-
-config CWMP_DEVEL_DEBUG
-	bool "Compile with development debug options"
-	default n
-
-endif
-

icwmp/Makefile

@@ -1,54 +1,73 @@
 #
-# Copyright (C) 2020 iopsys Software Solutions AB
+# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
 #
-# This is free software, licensed under the GNU General Public License v2.
+# This is free software, licensed under the BSD-3-Clause
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=7.0.1-2021-04-15
-PKG_FIXUP:=autoreconf
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_VERSION:=9.1.6
+
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=f70cc81e5688e32aa82084faae5bc6ff710bb81b
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
+PKG_SOURCE_VERSION:=79284d1f4e16cf6077a7394f0c04a894b83a8a41
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=COPYING
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_CWMP_ACS_MULTI \
-	CONFIG_CWMP_ACS_HDM \
-	CONFIG_CWMP_DEBUG \
-	CONFIG_CWMP_DEVEL_DEBUG
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
 
-define Package/$(PKG_NAME)
+define Package/icwmp/default
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=CWMP client
-  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
+  TITLE:=TR069 CWMP client
+  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid
 endef
 
-define Package/$(PKG_NAME)/description
- A free client implementation of CWMP (TR-069) protocol
+define Package/icwmp-openssl
+  $(Package/icwmp/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
+  VARIANT:=openssl
 endef
 
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config_cwmp.in"
+define Package/icwmp-wolfssl
+  $(Package/icwmp/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
+  CONFLICTS := icwmp-openssl
+  VARIANT:=wolfssl
 endef
 
+define Package/icwmp-mbedtls
+  $(Package/icwmp/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
+  CONFLICTS := icwmp-openssl icwmp-wolfssl
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -56,69 +75,32 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE -D_AADJ
-
-ifneq ($(CWMP_REVISION)_,_)
-ifneq ($(CWMP_REVISION),exported)
-ifneq ($(CWMP_REVISION),Unversioned directory)
-TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
-endif
-endif
-endif
-
-TARGET_LDFLAGS += \
-	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
-
-CONFIGURE_ARGS += \
-	--with-uci-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
-	--with-libubus-include-path=$(STAGING_DIR)/usr/include
-
-ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
-CONFIGURE_ARGS += \
-	--enable-acs=multi
-endif
-
-ifeq ($(CONFIG_CWMP_ACS_HDM),y)
-CONFIGURE_ARGS += \
-	--enable-acs=hdm
-endif
-
-ifeq ($(CONFIG_CWMP_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-debug
-endif
-
-ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
-CONFIGURE_ARGS += \
-	--enable-devel
-endif
-
-define Package/$(PKG_NAME)/install
+define Package/icwmp/default/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/
-	$(CP) ./files/* $(1)/
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
+	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
+	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
+	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
-define Package/$(PKG_NAME)/postinst
-	#!/bin/sh
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Enabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd enable
-	fi
-	exit 0
-endef
+Package/icwmp-openssl/install = $(Package/icwmp/default/install)
+Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
+Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
 
-define Package/$(PKG_NAME)/prerm
-	#!/bin/sh
-	if [ -z "$${IPKG_INSTROOT}" ]; then
-		echo "Disabling rc.d symlink for icwmpd"
-		/etc/init.d/icwmpd disable
-	fi
-	exit 0
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))
+$(eval $(call BuildPackage,icwmp-openssl))
+$(eval $(call BuildPackage,icwmp-wolfssl))
+$(eval $(call BuildPackage,icwmp-mbedtls))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -0,0 +1,36 @@
+{
+	"json_plugin_version": 1,
+	"Device.CWMPManagementServer.": {
+		"type": "object",
+		"version": "2.15",
+		"protocols": [
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"dependency": "file:/etc/config/cwmp",
+		"EnableCWMP": {
+			"type": "boolean",
+			"version": "2.15",
+			"read": true,
+			"write": true,
+			"protocols": [
+				"usp"
+			],
+			"mapping": [
+				{
+					"type": "uci",
+					"uci": {
+						"file": "cwmp",
+						"section": {
+							"name": "cpe"
+						},
+						"option": {
+							"name": "enable"
+						}
+					}
+				}
+			]
+		}
+	}
+}

icwmp/files/etc/config/cwmp

@@ -1,11 +1,9 @@
 config acs 'acs'
-	option url ''
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option periodic_inform_enable 'true'
 	option periodic_inform_interval '1800'
 	option periodic_inform_time '0001-01-01T00:00:00Z'
-	option ParameterKey ''
 	option dhcp_discovery 'enable'
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
@@ -13,15 +11,15 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
-	option https_ssl_capath ''
 	option ipv6_enable '0'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option interface 'eth0.1'
+	option enable '1'
 	option default_wan_interface 'wan'
+	option default_lan_interface 'lan'
 	option log_to_console 'disable'
-	option log_to_file 'enable'
+	option log_to_file 'disable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'
@@ -30,16 +28,16 @@ config cpe 'cpe'
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option port '7547'
-	option ubus_socket '/var/run/ubus.sock'
 	option provisioning_code ''
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '60'
+	option session_timeout '300'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
+	option incoming_rule 'Port_Only'
 	
 config lwn 'lwn'
 	option enable '1'

icwmp/files/etc/firewall.cwmp

@@ -1,21 +1,80 @@
-#created by the icwmp package 
-zone_name=""
-port=""
-if [ "$zone_name" = "" ]; then
+#!/bin/sh
+
+#created by the icwmp package
+log() {
+	echo "${@}"|logger -t firewall.cwmp -p info
+}
+
+if [ ! -f "/var/state/cwmp" ]; then
+	exit 0;
+fi
+
+zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
+port=$(uci -q get cwmp.cpe.port)
+ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
+ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
+
+if [ -z "${zone_name}" ]; then
+	log "empty firewall zone name"
 	exit 0
 elif [ "$zone_name" = "icwmp" ]; then
 	iptables -nL zone_icwmp_input 2> /dev/null
 	if [ $? != 0 ]; then
-		iptables -N zone_icwmp_input
-		iptables -t filter -A INPUT -j zone_icwmp_input
-		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
+		iptables -w 1 -N zone_icwmp_input
+		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	else			
-		iptables -F zone_icwmp_input
-		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
+		iptables -w 1 -F zone_icwmp_input
+		iptables -w 1 -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	fi			
 else
-	iptables -F zone_icwmp_input 2> /dev/null
-	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
-	iptables -X zone_icwmp_input 2> /dev/null
+	iptables -w 1 -F zone_icwmp_input 2> /dev/null
+	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -w 1 -X zone_icwmp_input 2> /dev/null
 fi
-#iptables -I FW_ZONE -p tcp -s ACS_ADDRESS --dport PORT -j ACCEPT --comment "Open ACS port"
+
+cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
+cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
+
+# default incoming rule is Port only
+if [ -z "${incoming_rule}" ]; then
+	incoming_rule="port_only"
+fi
+
+if [ "${incoming_rule}" = "ip_only" ]; then
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+elif [ "${incoming_rule}" = "port_only" ]; then
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+else
+	if [ -n "${ipaddr}" ]; then
+		cmd="${cmd} -s ${ipaddr}"
+		cmd6="${cmd6} -s ${ip6addr}"
+	fi
+
+	if [ -n "${port}" ]; then
+		cmd="${cmd} --dport ${port}"
+		cmd6="${cmd6} --dport ${port}"
+	fi
+fi
+
+echo ${cmd}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd}
+fi
+
+echo ${cmd6}|grep -q "\-\-dport \|\-s "
+if [ "$?" -eq 0 ]; then
+	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
+	${cmd6}
+fi
+
+uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
+uci -c /var/state -q commit cwmp

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/network.sh
-
-[ "$ACTION" == "ifup" ] || exit 0
-
-[ -f /etc/config/cwmp ] || exit 0
-
-handle_icwmp_restart() {
-	[ -f /tmp/switching_mode ] && exit 0
-	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
-
-	[ "$INTERFACE" == "loopback" ] && exit 0
-
-	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
-	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
-
-	local islan="$(uci -q get network.$INTERFACE.is_lan)"
-	[ "$islan" == "1" ] && exit 0
-
-	local proto="$(uci -q get network.$INTERFACE.proto)"
-	[ "$proto" == "none" ] && exit 0
-
-	local ifname="$(uci -q get network.$INTERFACE.ifname)"
-	[ "${ifname:0:1}" == "@" ] && exit 0
-
-	mkdir -p /tmp/ipv4
-
-	network_flush_cache
-
-	local previpaddr=""
-	local curipaddr=""
-	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
-	previpaddr=$(cat $ipaddrfile 2>/dev/null)
-	network_get_ipaddr curipaddr $INTERFACE
-	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
-
-	local prevgateway=""
-	local curgateway=""
-	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
-	prevgateway=$(cat $gatewayfile 2>/dev/null)
-	network_get_gateway curgateway $INTERFACE
-	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
-
-	local prevsubnets=""
-	local cursubnets=""
-	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
-	prevsubnets=$(cat $subnetsfile 2>/dev/null)
-	network_get_subnets cursubnets $INTERFACE
-	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
-
-	local prevdnsservers=""
-	local curdnsservers=""
-	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
-	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
-	network_get_dnsserver curdnsservers $INTERFACE
-	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
-
-	local prevdev=""
-	local curdev=""
-	local devfile=/tmp/ipv4/$INTERFACE-dev
-	prevdev=$(cat $devfile 2>/dev/null)
-	network_get_device curdev $INTERFACE
-	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
-
-	local prevopt43url=""
-	local curopt43url=""
-	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
-	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
-	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
-	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
-
-	[ \
-		"$prevdev" == "$curdev" -a \
-		"$previpaddr" = "$curipaddr" -a \
-		"$prevgateway" = "$curgateway" -a \
-		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
-
-	/etc/init.d/icwmpd reload &
-}
-
-handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -0,0 +1,32 @@
+#!/bin/sh
+. /lib/functions.sh
+
+log() {
+	echo "$@" |logger -t cwmp.update -p info
+}
+
+handle_icwmp_update() {
+	local cwmp_enable
+	config_load cwmp
+
+	config_get_bool cwmp_enable cpe enable 1
+	if [ "$cwmp_enable" = "0" ]; then
+		return 0
+	fi
+
+	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
+
+	if [ "$ret" == "true" ]; then
+		# read status from var/state/cwmp
+		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
+		if [ "$status" != "running" ]; then
+			log "Trigger out of bound inform, since last inform status was failure"
+			ubus -t 10 call tr069 inform >/dev/null 2>&1
+		fi
+	else
+		log "Restarting icwmp tr069 object"
+		/etc/init.d/icwmpd restart
+	fi
+}
+
+handle_icwmp_update $@

icwmp/files/etc/init.d/icwmpd

@@ -1,125 +1,283 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
-. /lib/functions.sh
-include /lib/network
-. /usr/share/libubox/jshn.sh
-
 START=99
-STOP=10
+STOP=00
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+include /lib/network
 
-validate_url() {
-	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
-	# Example: SCHEMA_LIST="http https"
-	SCHEMA_LIST="http"
-
-	for schema in $SCHEMA_LIST;	do
-		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
-		if [ "_$dest" != "_" ]; then
-			return 0
-		fi
-	done
-	return 1
+log() {
+	echo "${@}"|logger -t cwmp.init -p info
 }
 
-get_acs_url() {
-	local default_acs="http://10.10.1.6:8000/openacs/acs"
-	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
-	local url="$(uci -q get cwmp.acs.url)"
-	local dhcp_url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
+regenerate_ssl_link()
+{
+	local cert_dir all_file rehash
 
-	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
-		url="$dhcp_url"
-		echo "ACS URL from DHCP server: $url"
-		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
-	elif [ -n "$url" ];then
-		url="$(uci -q get cwmp.acs.url)"
-		echo "ACS URL from configuration: $url"
-	else
-		url="$default_acs"
-		echo "Using default ACS URL: $url"
-		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url"
+	cert_dir="${1}"
+	[ ! -d "${cert_dir}" ] && return 0;
+
+	### Generate all ssl link for pem certicates ###
+	all_file=$(ls $cert_dir/*.pem 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
 	fi
 
-	validate_url "$url"
-	if [ "$?" != "0" ];then
-		echo "Invalid ACS URL: $url"
-		exit 1
+	### Generate all ssl link for crt certicates ###
+	all_file=$(ls $cert_dir/*.crt 2>/dev/null)
+	if [ -n "${all_file}" ]; then
+		for cfile in $all_file; do
+			rehash="$(openssl x509 -hash -noout -in $cfile)"
+			[ -f ${cert_dir}/${rehash}.0 ] || \
+				ln -s $cfile $cert_dir/${rehash}.0
+		done
 	fi
 }
 
 enable_dhcp_option43() {
-	local wan=$1
-	local discovery=0
-	case $2 in
-		enable|1) discovery=1 ;;
-	esac
+	local wan="${1}"
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local enabled
-	local newreqopts=
-	local baseopts=
 	local reqopts="$(uci -q get network.$wan.reqopts)"
 	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
+	local newreqopts=""
+	local option43_present=0
+
 	for ropt in $reqopts; do
 		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
+			43) option43_present=1 ;;
+			*) ;;
 		esac
 	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ $proto == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
+
+	if [ ${option43_present} -eq 1 ]; then
+		return;
+	fi
+
+	newreqopts="$reqopts 43"
+	if [ "${proto}" == "dhcp" ]; then
 		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
-	########################################################
 }
 
-wait_for_option43() {
-	local time=$1
-	local default_wan_interface dhcp_discovery url
+convert_to_hex() {
+	local val=""
+	local optval="${1}"
+	OPTIND=1
+	while getopts ":" opt "-$optval"
+	do
+		temp=$(printf "%02X" "'${OPTARG:-:}")
+		val="${val}:${temp}"
+	done
 
-	config_get default_wan_interface cpe default_wan_interface "wan"
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get url acs url
+	echo "${val}"
+}
 
-	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
+configure_send_op125() {
+	local sendopt="${1}"
+	local intf="${2}"
+	local uci="${3}"
+	local hex_oui=""
+	local hex_serial=""
+	local hex_class=""
+	local oui_len=0
+	local serial_len=0
+	local class_len=0
 
-	local tm=0
+	if [ "${uci}" = "network" ]; then
+		local opt125="125:00:00:0D:E9"
+	else
+		local opt125="125,00:00:0D:E9"
+	fi
 
-	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
-	then
-		echo "Waiting for discovery of ACS URL from dhcp server ..."
-		while [ $tm -le $time ]
-		do
-			acs_url=`uci -P /var/state -q get cwmp.acs.dhcp_url`
-			if [ "$acs_url" != "" ]
-			then
+	config_get oui cpe manufacturer_oui ""
+	if [ -z "${oui}" ]; then
+		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
+	fi
+
+	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+	config_get serial cpe serial_number ""
+	if [ -z "${serial}" ]; then
+		serial=$(db -q get device.deviceinfo.SerialNumber)
+	fi
+
+	config_get class cpe product_class ""
+	if [ -z "${class}" ]; then
+		class=$(db -q get device.deviceinfo.ProductClass)
+	fi
+
+	oui_len=$(echo -n "${oui}" | wc -m)
+	serial_len=$(echo -n "${serial}" | wc -m)
+	class_len=$(echo -n "${class}" | wc -m)
+
+	if [ ${oui_len} -eq 0 ] || [ ${serial_len} -eq 0 ]; then
+		return 0
+	fi
+
+	opt125_len=$((oui_len + serial_len + class_len))
+	if [ ${class_len} -gt 0 ]; then
+		opt125_len=$((opt125_len + 6))
+	else
+		opt125_len=$((opt125_len + 4))
+	fi
+
+	hex_opt125_len=$(printf "%02X" "${opt125_len}")
+	opt125="${opt125}:${hex_opt125_len}"
+	hex_oui=$(convert_to_hex "${oui}")
+	if [ -z "${hex_oui}" ]; then
+		return 0
+	fi
+
+	hex_oui_len=$(printf "%02X" "${oui_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
+	else
+		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
+	fi
+
+	hex_serial=$(convert_to_hex "${serial}")
+	if [ -z "${hex_serial}" ]; then
+		return 0
+	fi
+
+	hex_serial_len=$(printf "%02X" "${serial_len}")
+	if [ "${uci}" = "network" ]; then
+		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
+	else
+		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
+	fi
+
+	if [ ${class_len} -gt 0 ]; then
+		hex_class=$(convert_to_hex "${class}")
+		if [ -z "${hex_class}" ]; then
+			return 0
+		fi
+
+		hex_class_len=$(printf "%02X" "${class_len}")
+		if [ "${uci}" = "network" ]; then
+			opt125="${opt125}:03:${hex_class_len}${hex_class}"
+		else
+			opt125="${opt125}:06:${hex_class_len}${hex_class}"
+		fi
+	fi
+
+
+	if [ "${uci}" = "network" ]; then
+		new_send_opt="$sendopt $opt125"
+		uci -q set network.$intf.sendopts="$new_send_opt"
+	else
+		uci -q add_list dhcp.$intf.dhcp_option="$opt125"
+	fi
+}
+
+enable_dnsmasq_option125() {
+	local lan="${1}"
+	local send125_present=0
+	local opt125="125,"
+
+	local proto="$(uci -q get dhcp.$lan.dhcpv4)"
+	if [ "${proto}" = "server" ]; then
+		opt_list="$(uci -q get dhcp.$lan.dhcp_option)"
+
+		for sopt in $opt_list; do
+			if [[ "$sopt" == "$opt125"* ]]; then
+				send125_present=1
 				break
-			else
-				sleep 1
 			fi
-			tm=$((tm+1))
 		done
+
+		if [ ${send125_present} -eq 0 ]; then
+			configure_send_op125 "" "${lan}" "dhcp"
+			ubus call uci commit '{"config":"dhcp"}'
+		fi
+	fi
+}
+
+set_vendor_id() {
+	local wan="${1}"
+	local proto="$(uci -q get network.$wan.proto)"
+
+	if [ "${proto}" == "dhcp" ]; then
+		uci -q set network.$wan.vendorid="dslforum.org"
+		ubus call uci commit '{"config":"network"}'
+	fi
+}
+
+enable_disable_dhcp_option125() {
+	local wan="${1}"
+	local action="${2}"
+
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local sendopts="$(uci -q get network.$wan.sendopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local newreqopts=""
+	local newsendopts=""
+	local req125_present=0
+	local send125_present=0
+	local network_uci_update=0
+	local opt125="125:"
+
+	for ropt in $reqopts; do
+		case $ropt in
+			125) req125_present=1 ;;
+			*) ;;
+		esac
+	done
+
+	for sopt in $sendopts; do
+		if [[ "$sopt" == "$opt125"* ]]; then
+			send125_present=1
+			break
+		fi
+	done
+
+	if [ "${proto}" == "dhcp" ]; then
+		if [ "${action}" == "enable" ]; then
+			if [ ${req125_present} -eq 0 ]; then
+				newreqopts="$reqopts 125"
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+.
+			if [ ${send125_present} -eq 0 ]; then
+				configure_send_op125 "${sendopts}" "${wan}" "network"
+				network_uci_update=1
+			fi
+		else
+			if [ ${req125_present} -eq 1 ]; then
+				newreqopts=$(echo ${reqopts/125/})
+				uci -q set network.$wan.reqopts="$newreqopts"
+				network_uci_update=1
+			fi
+
+			if [ ${send125_present} -eq 1 ]; then
+				for sopt in $sendopts; do
+					if [[ "$sopt" == "$opt125"* ]]; then
+						newsendopts=$(echo ${sendopts/"${sopt}"/})
+						uci -q set network.$wan.sendopts="$newreqopts"
+						network_uci_update=1
+						break
+					fi
+				done
+			fi
+		fi
+	fi
+
+	if [ ${network_uci_update} -eq 1 ]; then
+		uci commit network
+		ubus call network reload
 	fi
 }
 
@@ -130,60 +288,252 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f $resolvfile ]; do
+	while [ ! -f "$resolvfile" ]; do
 		sleep 1
-		[ $tm -ge $time ] && break
+		[ "$tm" -ge "$time" ] && break
 		tm=$((tm+1))
 	done
 }
 
-set_wan_interface() {
-	local l3_device=""
-	local default_wan_interface=""
+copy_cwmp_etc_files_to_varstate() {
+	mkdir -p /var/run/icwmpd
 
-	config_get default_wan_interface cpe default_wan_interface "wan"
-	json_load "$(ifstatus $default_wan_interface)"
-	json_get_var l3_device l3_device
-	if [ "$l3_device" != "" ];then
-		uci -q set cwmp.cpe.interface="$l3_device"
-		uci -q commit cwmp
+	if [ -f /etc/icwmpd/cwmp ]; then
+		uci -q -c /etc/icwmpd delete cwmp.acs
+		uci -q -c /etc/icwmpd delete cwmp.gatewayinfo
+		uci -q -c /etc/icwmpd commit cwmp
+		cat /etc/icwmpd/cwmp >> /var/state/cwmp
+	fi
+
+	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
+	fi
+
+	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
 	fi
 }
 
-start_service() {
-	if [ ! -f /tmp/.icwmpd_boot ]; then
-		touch /etc/icwmpd/.icwmpd_boot
-		touch /tmp/.icwmpd_boot
-	else
-		[ -f /sbin/netifd ] && echo "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-		[ -f /etc/config/wireless ] && echo "Waiting for WiFi to be started ..." && ubus -t 5 wait_for network.wireless
-		[ -f /usr/sbin/dnsmasq ] && echo "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-		[ -f /etc/config/dhcp ] && echo "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-		[ -f /usr/sbin/asterisk ] && echo "Waiting for Voice to be started ..." && ubus -t 5 wait_for asterisk
+copy_cwmp_varstate_files_to_etc() {
+	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
+		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
+	fi
 
-		config_load cwmp
-		set_wan_interface
-		wait_for_option43 20
-		get_acs_url
+	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
+		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
+	fi
 
-		procd_open_instance
-		procd_set_param command "$PROG"
-		if [ "$1" = "GetRPCMethods" ];then
-			procd_append_param command -g
-		elif [ -f /etc/icwmpd/.icwmpd_boot ]; then
-			procd_append_param command -b
+	if [ -f /var/state/cwmp ]; then
+		uci -q -c /var/state delete cwmp.sess_status
+		uci -q -c /var/state commit cwmp
+		cp -f /var/state/cwmp /etc/icwmpd/
+	fi
+
+	# move the successful custom notify import marker to persistent storage
+	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
+		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
+	fi
+}
+
+validate_acs_section()
+{
+	uci_validate_section cwmp acs "acs" \
+		'passwd:string' \
+		'periodic_inform_enable:bool' \
+		'periodic_inform_interval:uinteger' \
+		'periodic_inform_time:string' \
+		'url:string' \
+		'dhcp_discovery:string' \
+		'dhcp_url:string' \
+		'compression:or("GZIP","Deflate","Disabled")' \
+		'retry_min_wait_interval:range(1, 65535)' \
+		'retry_interval_multiplier:range(1000, 65535)' \
+		'ipv6_enable:bool' \
+		'ssl_capath:string'
+
+}
+
+validate_cpe_section()
+{
+	uci_validate_section cwmp cpe "cpe" \
+		'interface:string' \
+		'default_wan_interface:string' \
+		'log_to_console:or("enable","disable")' \
+		'log_to_file:or("enable","disable")' \
+		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
+		'log_file_name:string' \
+		'log_max_size:uinteger' \
+		'userid:string' \
+		'passwd:string' \
+		'port:uinteger' \
+		'provisioning_code:string:""' \
+		'amd_version:range(1, 6)' \
+		'instance_mode:or("InstanceNumber","InstanceAlias")' \
+		'session_timeout:uinteger' \
+		'notification:bool' \
+		'exec_download:bool' \
+		'periodic_notify_enable:bool' \
+		'enable:bool' \
+		'periodic_notify_interval:uinteger'
+}
+
+validate_defaults() {
+	local ssl_capath
+	config_load cwmp
+
+	validate_acs_section || {
+		log "Validation of acs section failed"
+		return 1;
+	}
+
+	ssl_capath="${ssl_capath%/}"
+	# Put the cert pem file in keep list
+	if [ -d "${ssl_capath}" ]; then
+		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
+			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
+			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
 		fi
-		procd_set_param respawn "3" "7" "0"
-		procd_close_instance
 	fi
+
+	validate_cpe_section || {
+		log "Validation of cpe section failed"
+		return 1;
+	}
+
+	return 0;
 }
 
-reload_service() {
-	stop
+boot() {
+	local enable_cwmp="0"
+	local dhcp_discovery="0"
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+	if [ "$enable_cwmp" = "0" ]; then
+		return 0
+	fi
+
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get wan_interface cpe default_wan_interface "wan"
+
+	if [ "${dhcp_discovery}" == "enable" ] || [ "${dhcp_discovery}" == "1" ]; then
+		# Set dhcp option 43 if not already configured
+		enable_dhcp_option43 "${wan_interface}"
+		# Set dhcp option 60
+		set_vendor_id "${wan_interface}"
+	fi
+
+	config_get lan_interface cpe default_lan_interface ""
+	if [ -n "${lan_interface}" ]; then
+		# Set dhcp_option 125 if not already configured
+		enable_disable_dhcp_option125 "${wan_interface}" "enable"
+		enable_dnsmasq_option125 "${lan_interface}"
+	else
+		# Remove dhcp option 125 if exists
+		enable_disable_dhcp_option125 "${wan_interface}" "disable"
+	fi
+	
+	config_get ssl_capath acs ssl_capath
+
+	if [ -n "${ssl_capath}" ]; then
+		regenerate_ssl_link "${ssl_capath}"
+	fi
+
+	# Copy backup data so that if it restart latter on, it gets the info
+	copy_cwmp_etc_files_to_varstate
+
 	start
 }
 
-service_triggers() {
-	procd_add_config_trigger "config.change" "cwmp"  /etc/init.d/icwmpd reload
+start_service() {
+	local enable_cwmp
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+
+	if [ "$enable_cwmp" = "0" ]; then
+		return 0
+	fi
+
+	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+
+	validate_defaults || {
+		log "Validation of defaults failed"
+		return 1;
+	}
+
+	procd_open_instance icwmp
+	procd_set_param command "$PROG"
+	procd_append_param command -b
+	procd_set_param respawn \
+		"${respawn_threshold:-5}" \
+		"${respawn_timeout:-10}" "${respawn_retry:-3}"
+
+	procd_set_param watch network.interface
+	procd_close_instance
+}
+
+service_stopped()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
+stop_service()
+{
+	copy_cwmp_varstate_files_to_etc
+}
+
+reload_service() {
+	local ret
+
+	config_load cwmp
+	config_get_bool enable_cwmp cpe enable 1
+
+	ret="0"
+	if [ "$enable_cwmp" = "0" ]; then
+		stop
+		start
+		return 0
+	fi
+
+	tr069_status="$(ubus -t 1 call tr069 status)"
+	ret="$?"
+	if [ "$ret" = "7" ]; then
+		# ubus timed out may be due to uloop is busy in some task so returning
+		return 0
+	fi
+
+	status="$(echo $tr069_status | jsonfilter -qe '@.cwmp.status')"
+	ret="$?"
+	if [ "$status" = "up" ]; then
+		ubus -t 1 call tr069 command '{"command":"reload"}'
+		ret="$?"
+	fi
+
+	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
+		log "Restarting CWMP client"
+		stop
+		start
+	fi
+}
+
+service_triggers() {
+       procd_add_reload_trigger "cwmp"
+
+       procd_open_trigger
+               json_add_array
+                       json_add_string "" "interface.update"
+                       json_add_array
+                               json_add_array
+                                       json_add_string "" "run_script"
+                                       json_add_string "" "/etc/icwmpd/update.sh"
+                               json_close_array
+                       json_close_array
+                       json_add_int "" "2000"
+               json_close_array
+       procd_close_trigger
 }
 

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,32 +1,41 @@
+#!/bin/sh
+
+. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
+config_load cwmp
 
-
-# Get factory base MAC.
-baseMac=$(db -q get hw.board.basemac)
-
-# Erase colon and space characters.
-baseMac=${baseMac//:/}
-baseMac=${baseMac// /}
-
-# Caseing and fixed length string.
-mac=$(printf "%12.12X" $((0x$baseMac)))
-
-# Get system serial number.
-serial=$(db -q get hw.board.serial_number)
-
-# Get userid values
-acs_userid=$(uci -q get cwmp.acs.userid)
-cpe_userid=$(uci -q get cwmp.cpe.userid)
-
-# Only set if they are empty
-if [ -z "$acs_userid" ]
-then
-    uci -q set cwmp.acs.userid="${mac:0:6}-${serial}"
+# Get Manufacturer OUI.
+config_get oui cpe manufacturer_oui ""
+if [ -z "${oui}" ]; then
+	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
 fi
 
-if [ -z "$cpe_userid" ]
-then
-    uci -q set cwmp.cpe.userid="${mac:0:6}-${serial}"
+oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+
+# Get system serial number.
+config_get serial cpe serial_number ""
+if [ -z "${serial}" ]; then
+	serial=$(db -q get device.deviceinfo.SerialNumber)
+fi
+
+# Get userid values
+config_get acs_userid acs userid ""
+config_get cpe_userid cpe userid ""
+
+# Only set if they are empty
+if [ -z "${acs_userid}" ]; then
+    uci -q set cwmp.acs.userid="${oui}-${serial}"
+fi
+
+if [ -z "${cpe_userid}" ]; then
+    uci -q set cwmp.cpe.userid="${oui}-${serial}"
+fi
+
+# Fix the cwmp.cpe.enable parameter
+# set default to 1 if not defined
+config_get enable_cwmp cpe enable ""
+if [ -z "${enable_cwmp}" ]; then
+    uci -q set cwmp.cpe.enable="1"
 fi
 
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -1,54 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-set_cwmp_reqopts() {
-	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
-	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
-	local discovery=0
-	case $dhcp_discovery in
-		enable|1) discovery=1 ;;
-	esac
-
-	local newreqopts=
-	local baseopts=
-	local reqopts="$(uci -q get network.$wan.reqopts)"
-	local proto="$(uci -q get network.$wan.proto)"
-	local tropts="43"
-	local oldreqopts="$reqopts"
-	local ropt iopt
-	for ropt in $reqopts; do
-		case $ropt in
-			43) ;;
-			*) baseopts="$baseopts $ropt" ;;
-		esac
-	done
-	ropt=""
-	reqopts="$baseopts $tropts"
-	for ropt in $reqopts; do
-		case $ropt in
-			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
-			*) newreqopts="$newreqopts $ropt" ;;
-		esac
-	done
-	if [ "$proto" == "dhcp" ]; then
-		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
-		[ "$newreqopts" == "$oldreqopts" ] && return
-		uci -q set network.$wan.reqopts="$newreqopts"
-		uci commit network
-	fi
-}
-
-regenerate_ssl_link(){
-	local cert_dir="/etc/ssl/certs"
-	local all_file=$(ls $cert_dir/*.pem)
-	for cfile in $all_file
-	do
-		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
-	done
-}
-
-set_cwmp_reqopts
-regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1 +1,2 @@
-/etc/icwmpd/.icwmpd_backup_session.xml
+/var/run/icwmpd/icwmpd_backup_session.xml
+/etc/icwmpd/cwmp

icwmp/files/lib/upgrade/post-rootfs-fixup.d/215-icwmp

@@ -1,29 +0,0 @@
-#!/bin/sh
-
-# As part of sysupgrade we copy CWMP Backup Session XML file.
-
-
-# Abort on any error.
-set -e
-
-
-# Do nothing if user want to discard old settings.
-if [ -n "$SAVE_CONFIG" ] && [ $SAVE_CONFIG -eq 0 ]; then
-	exit 0
-fi
-
-# Source functions.
-for f in /lib/upgrade/iopsys*.sh; do
-	[ -r "$f" -a -s "$f" ] || continue
-	source $f
-done
-
-
-if [ -s "${2}/etc/icwmpd/.icwmpd_backup_session.xml" ]; then
-	cat "${2}/etc/icwmpd/.icwmpd_backup_session.xml" > "/etc/icwmpd/.icwmpd_backup_session.xml"
-fi
-
-# Report success.
-log "post-hooks" "CWMP Backup Session XML file migrated"
-
-exit 0

ieee1905/Config.in

@@ -1,29 +1,27 @@
-if PACKAGE_ieee1905 || PACKAGE_lib1905al
+if (PACKAGE_ieee1905)
 
-menu "developer/debug options"
+menu "Configuration"
 
-	config IEEE1905_MAP_COMPLETE_NETWORK
-		bool "Create network topology for complete network"
-		default n
+config IEEE1905_EXTENSION_ALLOWED
+	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
+	default y
 
-	config IEEE1905_SPEED_UP_DISCOVERY
-		bool "Speed up discovery of an AL in network"
-		default y
+config IEEE1905_PLATFORM_HAS_WIFI
+	bool "Platform has WiFi"
+	default y if PACKAGE_libwifi
 
-	config IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
-		bool "Do not accept M1/M2 messages from unknown AL(s)"
-		default y
+config IEEE1905_CMDU_SA_IS_ALMAC
+	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
+	default n
 
-	choice
-		prompt "Select ALME support"
-		default IEEE1905_ALME_OVER_UBUS
+config IEEE1905_WIFI_EASYMESH
+	bool "Include WiFi-Alliance's Easymesh updates"
+	default y
 
-		config IEEE1905_ALME_OVER_UBUS
-			bool "ALME methods supported over ubus"
+config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
+	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
+	default y
 
-		#config IEEE1905_ALME_OVER_TCP
-		#	bool "ALME server over TCP port"
-
-	endchoice
 endmenu
+
 endif

ieee1905/Makefile

@@ -1,142 +1,140 @@
 #
-# Copyright (C) 2019 Iopsys
+# Copyright (C) 2021 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=2.1.44
+PKG_VERSION:=7.0.2
 
-LOCAL_DEV:=0
+LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=33d05c2223023ce5b57001008555bd0f82e88541
+PKG_SOURCE_VERSION:=47c04c502edf441fef9f14307be5f07541614049
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
 endif
-
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_LICENSE:=BSD-3-Clause
+PKG_LICENSE_FILES:=LICENSE
+
 include $(INCLUDE_DIR)/package.mk
 
-define Package/ieee1905
+
+define Package/ieee1905/Default
   SECTION:=utils
   CATEGORY:=Utilities
-  TITLE:=IEEE1905 daemon
-  DEPENDS:= +libuci +libjson-c +libieee1905 +ubox +libpcap +libopenssl +libwifi +libeasy
+  SUBMENU:=IEEE-1905.1 stack
 endef
 
 define Package/ieee1905/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/ieee1905/description
- IEEE1905 stack with extended functionalities.
+  source "$(SOURCE)/Config.in"
 endef
 
 define Package/libieee1905
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=IEEE1905 cmdu tlv utility library
+  $(call Package/ieee1905/Default)
+  TITLE:=libieee1905.so (library for CMDU and TLV handling)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json
 endef
 
-define Package/libwsc
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Wifi Simple Configuration building and processing library
-  DEPENDS= +libopenssl +libuci +libubus
+define Package/ieee1905
+  $(call Package/ieee1905/Default)
+  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ubus +libpthread \
+	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
 endef
 
-define Package/lib1905hle
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=IEEE1905 hle stack library
+include $(wildcard plugins/*.mk)
+
+define Package/ieee1905/description
+ This package provides IEEE Std 1905.1 stack.
 endef
 
-LIBS := \
-	$(if $(CONFIG_PACKAGE_libwsc),libwsc.so)
+define Package/libieee1905/description
+ This package provides library functions for IEEE Std 1905.1 stack.
+endef
+
+plugins := \
+	$(if $(CONFIG_PACKAGE_map-plugin),map) \
+	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
+	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
+
+
+ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
+
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
-	-D_GNU_SOURCE \
-	-fstrict-aliasing \
-	-Wall \
-	-Wextra
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
+TARGET_CFLAGS += -DHAS_WIFI
+endif
+
+ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
+TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
+endif
+
+ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
+TARGET_CFLAGS += -DWIFI_EASYMESH
+endif
+
+ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
+TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
+endif
 
 MAKE_FLAGS += \
-	LIBS="$(LIBS)"
+	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
 
-ifeq ($(CONFIG_IEEE1905_SPEED_UP_DISCOVERY),y)
-TARGET_CFLAGS += -DSPEED_UP_DISCOVERY
-endif
-ifeq ($(CONFIG_IEEE1905_DO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS),y)
-TARGET_CFLAGS += -DDO_NOT_ACCEPT_UNAUTHENTICATED_COMMANDS
-endif
-ifeq ($(CONFIG_IEEE1905_ALME_OVER_TCP),y)
-TARGET_CFLAGS += -DALME_OVER_TCP
-endif
-ifeq ($(CONFIG_IEEE1905_ALME_OVER_UBUS),y)
-TARGET_CFLAGS += -DALME_OVER_UBUS
-endif
-ifeq ($(CONFIG_IEEE1905_MAP_COMPLETE_NETWORK),y)
-TARGET_CFLAGS += -DIEEE1905_MAP_COMPLETE_NETWORK
-endif
+MAKE_PATH:=src
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/ieee1905/* $(PKG_BUILD_DIR)/
-endef
-endif
 
 define Package/ieee1905/install
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/ieee1905
-	$(INSTALL_DIR) $(1)/usr/
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/etc/init.d/ieee1905 $(1)/etc/init.d/ieee1905
-	$(INSTALL_DATA) ./files/etc/config/ieee1905 $(1)/etc/config/ieee1905
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ieee1905d $(1)/usr/sbin/
-endef
-
-define Package/lib1905hle/install
+	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/lib/lib1905hle.so $(1)/usr/lib/lib1905hle.so
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/ieee1905d $(1)/usr/sbin/
 endef
 
 define Package/libieee1905/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/lib/libieee1905.so $(1)/usr/lib/libieee1905.so
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 endef
 
-define Package/libwsc/install
+define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/lib/libwsc.so $(1)/usr/lib/libwsc.so
-endef
-
-define Build/InstallDev/libwsc.so
 	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwsc/include/wsc.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/lib/libwsc.so $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef
 
 define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/ieee1905
-	$(INSTALL_DIR) $(1)/usr/include/ieee1905
-	$(INSTALL_DIR) $(1)/usr/include/lib1905hle
-	$(CP) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/ieee1905/
-	$(CP) $(PKG_BUILD_DIR)/libieee1905/include/*.h $(1)/usr/include/ieee1905/
-	$(CP) $(PKG_BUILD_DIR)/lib1905hle/include/*.h $(1)/usr/include/lib1905hle/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/lib/libieee1905.so $(1)/usr/lib
-	$(foreach lib,$(LIBS),$(call Build/InstallDev/$(lib),$(1),$(2));)
+	$(call Build/InstallDev/libieee1905,$(1),$(2))
+	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
 endef
 
-$(eval $(call BuildPackage,libieee1905))
-$(eval $(call BuildPackage,lib1905hle))
-$(eval $(call BuildPackage,libwsc))
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
+endef
+endif
+
 $(eval $(call BuildPackage,ieee1905))
+$(eval $(call BuildPackage,libieee1905))
+$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))

ieee1905/files/etc/config/ieee1905

@@ -1,17 +1,32 @@
 config ieee1905 'ieee1905'
-        option enabled '1'
-        option debug  true
-        option debug_level  2
-        option macaddress 'auto'
-        option registrar 0
-        option cmdu_event 1
-        option map_plugin 1
-
-config security 'security'
-        list method 'PBC'
+	option enabled '1'
+	option extension '1'
+	list extmodule 'map'
+	option registrar '2 5 6'
+#	option macaddress '0a:1b:2c:3d:4e:50'
 
 config al-iface
-        option enabled 1
-        option ifname 'br-lan'
-        option media 'bridge'
+	option enabled '1'
+	option ifname 'br-lan'
+	option type 'bridge'
+
+# ap sections are auto-generated/overwritten during onboarding
+#
+config ap
+	option band '2'
+	option ssid 'IOWRT-2.4GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+
+config ap
+	option band '5'
+	option ssid 'IOWRT-5GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
+
+config ap
+	option band '6'
+	option ssid 'IOWRT-6GHz'
+	option encryption 'sae-mixed'
+	option key '1234567890'
 

ieee1905/files/etc/init.d/ieee1905

@@ -1,72 +1,103 @@
 #!/bin/sh /etc/rc.common
 
 START=96
-STOP=22
+STOP=21
 
 USE_PROCD=1
-PROG=/usr/sbin/ieee1905d
 
-validate_ieee1905_section()
-{
-	uci_validate_section ieee1905 ieee1905 "${1}" \
-		'debug:bool:false' \
-		'enabled:bool:false'
-}
+IS_CFG_VALID=1
 
-configure_ieee1905()
-{
-	local enabled debug
+validate_ieee1905_section() {
+	uci_validate_section ieee1905 ieee1905 "ieee1905" \
+			'enabled:bool:true' \
+			'macaddress:or("auto",macaddr)' \
+			'registrar:string' \
+			'extension:bool:false' \
+			'extmodule:list(string)' \
 
-	validate_ieee1905_section ${1} || {
-		echo "Validation of ieee1905 section failed"
-		exit 1;
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
+		IS_CFG_VALID=0
+		return 1
 	}
-
-	if [ ${debug} -eq 1 ]; then
-		# Forward stdout of the command to logd
-		#procd_set_param stdout 1
-		# Same for stderr
-		procd_set_param stderr 1
-	fi
-
-	if [ ${enabled} -ne 1 ]; then
-		exit 0;
-	fi
+	return 0
 }
 
-configure_network()
-{
-	ebtables -L FORWARD|grep -iqE "1:80:C2:(0)+:(0)+:13.*-j.*DROP"
-	if [ "$?" -ne 0 ]; then
-		echo "Applying drop rule to drop pkts forwared by kernel to 1905.1 multicast mac"
-		ebtables -A FORWARD -d 01:80:c2:00:00:13 -j DROP
-	fi
+validate_ali_section() {
+	local section="$1"
+
+	uci_validate_section ieee1905 $section "${1}" \
+			'ifname:string' \
+			'type:or("bridge",string)'
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
 }
 
-service_running() {
-        ubus -t 2 wait_for wifi
+validate_ap_section() {
+	local section="$1"
+
+	uci_validate_section ieee1905 $section "${1}" \
+			'band:or("2", "5", "60", "6")' \
+			'ssid:string' \
+			'encryption:or("psk2", "sae-mixed", "sae",
+				"psk", "psk-mixed", "none", string)' \
+			'key:string' \
+			'uuid:string' \
+			'manufacturer:string' \
+			'model_name:string' \
+			'device_name:string' \
+			'model_number:string' \
+			'serial_number:string' \
+			'device_type:string' \
+			'os_version:uinteger'
+
+	[ "$?" -ne 0 ] && {
+		logger -s -t "ieee1905" "Validation of ap section $section failed"
+		IS_CFG_VALID=0
+		return 1
+	}
+	return 0
+}
+
+validate_ieee1905_config() {
+	IS_CFG_VALID=1
+
+	validate_ieee1905_section &&
+		config_foreach validate_ali_section "al-iface" &&
+		config_foreach validate_ap_section ap
+
+	[ "$IS_CFG_VALID" -ne 1 ] && {
+		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
+		return 1
+	}
+	return 0
 }
 
 start_service() {
+	config_load "ieee1905"
+	validate_ieee1905_config || return 1;
 
-	[ -d /usr/lib/ieee1905 ] || mkdir -p /usr/lib/ieee1905
-
-	procd_open_instance ieee1905
-	procd_set_param command ${PROG}
-	configure_ieee1905 "ieee1905"
-	configure_network
+	procd_open_instance
+        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
 	procd_set_param respawn
+	procd_set_param limits core="unlimited"
+#	procd_set_param env IEEE1905_LOG_CMDU=1
+#	procd_set_param stdout 1
+#	procd_set_param stderr 1
 	procd_close_instance
 }
 
+service_triggers()
+{
+	procd_add_reload_trigger "ieee1905"
+}
+
 reload_service() {
 	stop
 	start
 }
-
-service_triggers() {
-	procd_add_reload_trigger "network"
-	procd_add_reload_trigger "wireless"
-	procd_add_reload_trigger "netmode"
-	procd_add_reload_trigger "ieee1905"
-}

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -0,0 +1,22 @@
+#!/bin/sh
+
+
+BMAC=$(db -q get hw.board.basemac)
+BMAC=${BMAC//:/}
+BMAC=${BMAC// /}
+BMAC=$(printf "%12.12X" $((0x$BMAC)))
+
+[ "$BMAC" == "" ] && exit 1
+
+LMAC=$((0x$BMAC & 0xfeffffffffff))
+LMAC=$(($LMAC | 0x020000000000))
+LMAC=$(printf "%12.12X" $LMAC)
+LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
+
+mac=$(uci -q get ieee1905.ieee1905.macaddress)
+
+[ "$mac" != "" ] && exit 0
+
+uci set ieee1905.ieee1905.macaddress="$LMAC"
+uci commit ieee1905
+

ieee1905/files/etc/uci-defaults/31-ifname-option-to-list

@@ -0,0 +1,18 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+config_load ieee1905
+
+ifname_to_list() {
+	local section=$1
+
+	config_get ifname $section ifname	# get list or option as space separated values
+	ifname=${ifname//,/\ }			# convert csv with space separation
+	uci del ieee1905.${section}.ifname	# delete entry
+	for i in ${ifname}; do
+		uci add_list ieee1905.${section}.ifname="$i"	# writeback entry as list
+	done
+}
+
+config_foreach ifname_to_list al-iface

ieee1905/plugins/map.mk

@@ -0,0 +1,51 @@
+define Package/map-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/map-plugin/config
+	if (PACKAGE_map-plugin)
+
+		menu "Configuration"
+
+		config MULTIAP_EASYMESH_VERSION
+		int "Easymesh version"
+		default 2
+
+		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
+		bool "Sync configuration between dynamic controllers in the network"
+		default n
+
+		config MULTIAP_FUZZ_1905_CMDUS
+		bool "Include support to fuzz 1905 CMDUs for testing purpose"
+		default n
+
+		endmenu
+	endif
+endef
+
+TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
+
+ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
+TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
+endif
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef

ieee1905/plugins/snoop.mk

@@ -0,0 +1,12 @@
+define Package/snoop-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Show all received 1905 CMDUs over UBUS
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/snoop-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
+endef

ieee1905/plugins/topology.mk

@@ -0,0 +1,12 @@
+define Package/topology-plugin
+  $(call Package/ieee1905/Default)
+  TITLE:=Build full network topology of the 1905 nodes only
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
+
+define Package/topology-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
+endef

imonitor/Makefile

@@ -5,14 +5,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=imonitor
-PKG_VERSION:=1.0.0
+PKG_VERSION:=1.0.1
 PKG_RELEASE:=1
 PKG_BUILD_PARALLEL:=1
 PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
+PKG_SOURCE_VERSION:=4beb1d5d6925507f1850a84c0b83aaf12a082f7f
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.2
+PKG_VERSION:=1.2.3
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
+PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/Config.in

@@ -0,0 +1,7 @@
+config TARGET_VERSION
+	string
+	prompt "Software Version"
+
+config TARGET_CUSTOMER
+	string
+	prompt "Customer ID"