ponmngr: added documentaion files

Signed-off-by: Filip Matusiak <filip.matusiak@iopsys.eu>

ated/Makefile

@@ -1,67 +0,0 @@
-#
-# Copyright (C) 2016 inteno
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=ated
-PKG_VERSION:=1.2.2
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=http://public.inteno.se:/ated
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-#PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-#PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ated
-	CATEGORY:=Utilities
-	TITLE:=Daemon for handling wifi calibration
-	URL:=
-	DEPENDS:= libc
-endef
-
-define Package/ated/description
-	Daemon for handling wifi calibration
-endef
-
-#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
-
-MAKE_FLAGS += \
-	v=2 \
-	m=3
-
-
-#TARGET_CPPFLAGS := \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
-#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-#	$(TARGET_CPPFLAGS)
-
-# we donot wwant to have any install.
-define Build/Install/Default
-endef
-
-define Package/ated/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -13,6 +13,9 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -0,0 +1,31 @@
+config BBF_VENDOR_EXTENSION
+	bool "Enable Vendor Extension"
+	default y
+
+config BBF_VENDOR_LIST
+	string "Vendor List"
+	default "iopsys"
+
+config BBF_VENDOR_PREFIX
+	string "Vendor Prefix"
+	default "X_IOPSYS_EU_"
+
+config BBF_TR104
+	bool "Enable TR-104 Data Model Support"
+	default y
+
+config BBF_TR143
+	bool "Enable TR-143 Data Model Support"
+	default y
+
+config BBFDM_ENABLE_JSON_PLUGIN
+	bool "Enable json plugin to extend datamodel"
+	default y
+
+config BBFDM_ENABLE_DOTSO_PLUGIN
+	bool "Enable shared library plugin to extend datamodel"
+	default y
+
+config BBF_MAX_OBJECT_INSTANCES
+	int "Maximum number of instances per object"
+	default 255

bbf/Makefile

@@ -0,0 +1,209 @@
+#
+# Copyright (C) 2022 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libbbfdm
+PKG_VERSION:=6.8.19
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
+PKG_SOURCE_VERSION:=4e82190d88f73494dbc6d261e6eb507e348e10e3
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_LICENSE:=LGPL-2.1
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+define Package/libbbf_api
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
+  ABI_VERSION:=1.0
+endef
+
+define Package/libbbfdm/default
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Library for broadband forum data model support
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api
+endef
+
+define Package/libbbfdm
+  $(Package/libbbfdm/default)
+  TITLE += (internal)
+  VARIANT:=internal
+endef
+
+define Package/libbbfdm-mbedtls
+  $(Package/libbbfdm/default)
+  TITLE += (mbedtls)
+  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
+  VARIANT:=mbedtls
+  DEFAULT_VARIANT:=1
+endef
+
+define Package/libbbfdm-openssl
+  $(Package/libbbfdm/default)
+  TITLE += (openssl)
+  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
+  CONFLICTS := libbbfdm-mbedtls
+  VARIANT:=openssl
+endef
+
+define Package/libbbfdm-wolfssl
+  $(Package/libbbfdm/default)
+  TITLE += (wolfssl)
+  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
+  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
+  VARIANT:=wolfssl
+endef
+
+define Package/userinterface
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=Package to add Device.UserInterface. datamodel support
+endef
+
+define Package/userinterface/description
+  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
+endef
+
+define Package/libbbfdm/config
+	source "$(SOURCE)/Config_bbfdm.in"
+endef
+
+define Package/libbbf_api/description
+ Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
+endef
+
+define Package/libbbfdm/description
+ Library contains the data model tree. It includes TR181, TR104 and TR143 data models
+endef
+
+USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
+ifneq ($(USE_LOCAL),)
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+CMAKE_OPTIONS += \
+	-DBBF_TR181=ON
+
+ifeq ($(CONFIG_BBF_TR104),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR104=ON
+endif
+
+ifeq ($(CONFIG_BBF_TR143),y)
+CMAKE_OPTIONS += \
+	-DBBF_TR143=ON
+endif
+
+ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_EXTENSION=ON
+
+CMAKE_OPTIONS += \
+	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
+	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
+	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+
+endif ##CONFIG_BBF_VENDOR_EXTENSION
+
+ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_JSON_PLUGIN=ON
+endif
+
+ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
+CMAKE_OPTIONS += \
+	-DBBF_DOTSO_PLUGIN=ON
+endif
+
+ifeq ($(BUILD_VARIANT),openssl)
+CMAKE_OPTIONS += -DWITH_OPENSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),wolfssl)
+CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
+endif
+
+ifeq ($(BUILD_VARIANT),mbedtls)
+CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+endif
+
+define Package/libbbf_api/install
+	$(INSTALL_DIR) $(1)/lib
+endef
+
+define Package/libbbfdm/default/install
+	$(INSTALL_DIR) $(1)/lib
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
+	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
+ifeq ($(CONFIG_PACKAGE_mosquitto-ssl),y)
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) ./files/etc/uci-defaults/01-mosquitto-config $(1)/etc/uci-defaults/
+endif
+endef
+
+define Package/libbbfdm/default/prerm
+	#!/bin/sh
+	rm -rf /etc/bbfdm/dmmap/*
+	exit 0
+endef
+
+define Package/userinterface/install
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
+	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
+	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
+	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
+	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
+endef
+
+Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
+Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
+
+Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
+Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
+	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,userinterface))
+$(eval $(call BuildPackage,libbbf_api))
+$(eval $(call BuildPackage,libbbfdm))
+$(eval $(call BuildPackage,libbbfdm-openssl))
+$(eval $(call BuildPackage,libbbfdm-wolfssl))
+$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -0,0 +1,117 @@
+{
+	"Device.UserInterface.": {
+		"type": "object",
+		"version": "2.0",
+		"protocols": [
+			"cwmp",
+			"usp"
+		],
+		"access": false,
+		"array": false,
+		"Device.UserInterface.RemoteAccess.": {
+			"type": "object",
+			"version": "2.0",
+			"protocols": [
+				"cwmp",
+				"usp"
+			],
+			"access": false,
+			"array": false,
+			"Enable": {
+				"type": "boolean",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "enable"
+							}
+						}
+					}
+				]
+			},
+			"Port": {
+				"type": "unsignedInt",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"range": [
+					{
+						"max": 65535
+					}
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "port"
+							}
+						}
+					}
+				]
+			},
+			"SupportedProtocols": {
+				"type": "string",
+				"read": true,
+				"write": false,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"list": {
+					"datatype": "string",
+					"enumerations": [
+						"HTTP",
+						"HTTPS"
+					]
+				},
+				"default": "HTTP"
+			},
+			"Protocol": {
+				"type": "string",
+				"read": true,
+				"write": true,
+				"version": "2.0",
+				"protocols": [
+					"cwmp",
+					"usp"
+				],
+				"mapping": [
+					{
+						"type": "uci", 
+						"uci": {
+							"file": "userinterface", 
+							"section": {
+								"name": "remote_access"
+							}, 
+							"option": {
+								"name": "protocol"
+							}
+						}
+					}
+				]
+			}
+		}
+	}
+}

bbf/files/etc/config/userinterface

@@ -0,0 +1,6 @@
+config userinterface 'remote_access'
+	option enable '0'
+	option interface 'wan'
+	option port '80'
+	option protocol 'HTTP'
+

bbf/files/etc/firewall.userinterface

@@ -0,0 +1,88 @@
+#!/bin/sh
+
+
+#!/bin/sh
+
+. /lib/functions.sh
+
+IDENTIFIER="REMOTE-ACCESS-WAN"
+
+log() {
+	echo "${@}"|logger -t firewall.userinterface -p info
+}
+
+if [ ! -f "/etc/config/userinterface" ]; then
+	exit 0;
+fi
+
+function exec_cmd()
+{
+	if ! $@; then
+		log "Failed to run [$@]"
+	fi
+}
+
+function configure_firewall_rule()
+{
+	local enable port protocol gui_port
+	local zone interface
+
+	config_load userinterface
+	config_get_bool enable remote_access enable 1
+	config_get port remote_access port
+	config_get interface remote_access interface
+
+	if [ "${enable}" -eq "0" -o -z "${port}" -o -z "${interface}" ]; then
+		return 0;
+	fi
+
+	zone="zone_${interface}_input"
+	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+	if [ "$?" -eq 0 ]; then
+		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+	fi
+
+	zone="zone_${interface}_output"
+	iptables -w 1 -t filter -nL ${zone} 2>/dev/null 1>&2
+	if [ "$?" -eq 0 ]; then
+		iptables -w 1 -I ${zone} -p tcp -m multiport --dports ${port} -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
+	fi
+}
+
+function delete_firewall_rule()
+{
+	local zone interface
+	local CMD
+
+	config_load userinterface
+	config_get interface remote_access interface
+
+	# Clean remote interface rules
+	if [ -z "${interface}" ]; then
+		return 0
+	fi
+
+	zone="zone_${interface}_input"
+	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
+	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+		if [ -n "${rule_num}" ]; then
+			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
+		fi
+	done
+
+	zone="zone_${interface}_output"
+	CMD="iptables -w 1 -t filter -L ${zone} --line-numbers"
+	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
+		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
+		if [ -n "${rule_num}" ]; then
+			exec_cmd iptables -w 1 -t filter -D ${zone} ${rule_num};
+		fi
+	done
+}
+
+# Delete existing remote access rules
+delete_firewall_rule
+
+# Configure the User Interface rule
+configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=01
+
+USE_PROCD=1
+
+start_service() {
+	local enable
+
+	procd_open_instance usp
+
+	config_load userinterface
+	config_get_bool enable global enable 1
+
+	# Inject firewall rules
+	if [ "${enable}" -eq "1" ]; then
+		/etc/firewall.userinterface
+	fi
+
+	procd_close_instance
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "userinterface"
+}

bbf/files/etc/uci-defaults/01-mosquitto-config

@@ -0,0 +1,46 @@
+#!/bin/sh
+
+config_mosquitto_owrt() {
+	sec=$(uci -q get mosquitto.owrt)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto owrt)
+		uci -q rename mosquitto."${sec}"="owrt"
+	fi
+
+	uci -q set mosquitto.owrt.use_uci="1"
+	uci -q set mosquitto.owrt.write_pid="1"
+	uci -q commit mosquitto
+}
+
+config_mosquitto_general() {
+	sec=$(uci -q get mosquitto.mosquitto)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto mosquitto)
+		uci -q rename mosquitto."${sec}"="mosquitto"
+	fi
+
+	uci -q set mosquitto.mosquitto.log_dest="syslog"
+	uci -q set mosquitto.mosquitto.log_facility="5"
+	uci -q set mosquitto.mosquitto.log_timestamp="1"
+	uci -q set mosquitto.mosquitto.log_types="error warning notice"
+	uci -q set mosquitto.mosquitto.per_listener_settings="1"
+	uci -q commit mosquitto
+}
+
+config_mosquitto_persistence() {
+	sec=$(uci -q get mosquitto.persistence)
+	if [ -z "${sec}" ]; then
+		sec=$(uci -q add mosquitto persistence)
+		uci -q rename mosquitto."${sec}"="persistence"
+	fi
+
+	uci -q set mosquitto.persistence.persistence="0"
+	uci -q set mosquitto.persistence.location="/var/run"
+	uci -q commit mosquitto
+}
+
+if [ -f "/etc/config/mosquitto" ]; then 
+	config_mosquitto_owrt
+	config_mosquitto_general
+	config_mosquitto_persistence
+fi

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -0,0 +1,12 @@
+#!/bin/sh
+
+uci -q batch <<-EOT
+        delete firewall.userinterface
+        set firewall.userinterface=include
+        set firewall.userinterface.path=/etc/firewall.userinterface
+        set firewall.userinterface.reload=1
+        commit firewall
+EOT
+
+exit 0
+

bbk_cli/Makefile

@@ -0,0 +1,42 @@
+#
+# Copright (C) 2018 The Internet Foundation In Sweden
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bbk_cli
+PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bbk_cli
+	CATEGORY:=Utilities
+	DEPENDS:=+libpthread +libstdcpp
+	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
+endef
+
+define Package/bbk_cli/description
+	To measure connection speed in an environment that is missing a web browser, 
+	for example, in a server, you can use our command line interface bbk_cli, 
+	which is available for some of the most common operating systems.
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
+endef
+
+define Package/bbk_cli/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
+endef
+
+$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -0,0 +1,25 @@
+diff --git a/src/framework/engine.h b/src/framework/engine.h
+index 57a48ad..9e1bc36 100644
+--- a/src/framework/engine.h
++++ b/src/framework/engine.h
+@@ -10,6 +10,7 @@
+ #include <map>
+ #include <vector>
+ #include <string>
++#include <sys/select.h>
+ 
+ #include "logger.h"
+ 
+diff --git a/src/framework/mk.inc b/src/framework/mk.inc
+index 793e211..13275be 100644
+--- a/src/framework/mk.inc
++++ b/src/framework/mk.inc
+@@ -7,7 +7,7 @@ OS:=$(shell uname)
+ CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
+ 
+ ifeq ($(OS),Linux)
+-CXX = g++
++CXX = $(CROSS_COMPILE)g++
+ endif
+ 
+ ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,6 +18,9 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

bulkdata/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2022 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulkdata
+PKG_VERSION:=2.0.9
+
+LOCAL_DEV:=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
+PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+  SECTION:=utils
+  CATEGORY:=Utilities
+  SUBMENU:=TRx69
+  TITLE:=BBF BulkData Collection
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+endef
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -0,0 +1,6 @@
+
+config bulkdata 'bulkdata'
+	option enable '0'
+	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	option log_level '3'
+

bulkdata/files/etc/init.d/bulkdatad

@@ -0,0 +1,31 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+STOP=10
+
+USE_PROCD=1
+PROG="/usr/sbin/bulkdatad"
+
+start_service() {
+	local enable
+
+	config_load bulkdata
+	config_get_bool enable bulkdata enable 1
+
+	procd_open_instance bulkdata
+	[ "$enable" -eq "1" ] && {
+		procd_set_param command "$PROG"
+		procd_set_param respawn "3" "7" "0"
+	}
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start 
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger bulkdata
+}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -0,0 +1,75 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+PROFILE_COUNT=1
+
+get_next_count()
+{
+	local config="$1"
+	local default_name="${2}"
+	local count=${3}
+	local found=0
+
+	if [ -z "$count" ]; then
+		count=1
+	fi
+
+	while [ "${found}" -ne 1 ]; do
+		uci -q get ${config}.${default_name}_${count} >/dev/null
+		if [ $? -eq 0 ]; then
+			count=$((count + 1))
+		else
+			found=1;
+		fi
+	done
+
+	echo "${default_name}_${count}"
+}
+
+translate_profile_id_to_profile_name() {
+	local section="${1}"
+	local profile_id="${2}"
+	local profile_name="${3}"
+	local curr_profile_id
+
+	config_get curr_profile_id "${section}" profile_id
+
+	[ -n "${curr_profile_id}" ] || return
+	
+	[ "${curr_profile_id}" != "${profile_id}" ] && return
+
+	uci -q set bulkdata.${section}.profile_name="${profile_name}"
+	uci -q set bulkdata.${section}.profile_id=""	
+}
+
+update_profile_sections() {
+	local section="${1}"
+	local default="${2}"
+	local profile_name
+
+	config_get profile_id "${section}" profile_id
+
+	[ -n "${profile_id}" ] || return
+
+	case "${section}" in
+		"cfg"*)
+			profile_name="$(get_next_count bulkdata ${default} ${PROFILE_COUNT})"
+			uci_rename bulkdata "${section}" "${profile_name}"
+		;;
+	esac
+	PROFILE_COUNT=$((PROFILE_COUNT + 1))
+
+	[ -n "$profile_name" ] && section="${profile_name}"
+
+	uci -q set bulkdata.${section}.profile_id=""
+
+	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
+	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
+}
+
+config_load bulkdata
+config_foreach update_profile_sections profile profile
+uci commit bulkdata
+
+exit 0

bulut/Makefile

@@ -0,0 +1,38 @@
+#
+# Copyright (C) 2019 IOPSYS
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=bulut
+PKG_VERSION:=0.2
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
+PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/bulut
+	CATEGORY:=Utilities
+	DEPENDS:=
+	TITLE:=bulut
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include
+
+define Package/bulut/description
+	obuspa keys
+endef
+
+define Package/bulut/install
+	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,bulut))

catv/Makefile

@@ -1,9 +1,19 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,7 +1,4 @@
 #!/bin/sh /etc/rc.common
-#
-# Copyright (C) 2015 inteno.org
-#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -1,31 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=crashlog
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/crashlog
-  CATEGORY:=Utilities
-  TITLE:=Handling kernel crash logs
-endef
-
-define Package/crashlog/description
-	Handling kernel crash logs.
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/crashlog/install
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -1,11 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-
-start()
-{
-    if [ -e /proc/sys/kernel/core_pattern ]
-    then
-	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
-    fi
-}

crashlog/files/etc/init.d/crashlog

@@ -1,56 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-send_log()
-{
-	nr=$(db get hw.board.serialNumber)
-	hw=$(db get hw.board.hardware)
-	hwv=$(db get hw.board.hardwareVersion)
-	bid=$(db get hw.board.boardId)
-	sw=$(db get hw.board.iopVersion)
-	server=$(/sbin/uci get system.crashlog.server)
-
-	while true
-	do
-	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
-	    if [ $? == 0 ]
-	    then
-	       break;
-	    fi
-	    # wait for another minute then try again
-	    sleep 60
-	done
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=crashlog
-    /sbin/uci set system.crashlog.enable=no
-    /sbin/uci set system.crashlog.server="crash.inteno.se"
-    /sbin/uci commit
-}
-
-boot()
-{
-    # is crashlog enabled ?
-    enable=$(/sbin/uci get system.crashlog.enable)
-    case $enable in
-	0|no|NO|false|FALSE)
-	    exit 0
-	    ;;
-	"")
-	    fill_in_default
-	    exit 0
-	    ;;
-    esac
-
-    # is this boot a result from a crash ?
-    reason=$(cat /etc/boot_reason)
-    case $reason in
-	HW|WD)
-	    send_log&
-	    ;;
-    esac
-}

crashlog/files/sbin/logcore

@@ -1,61 +0,0 @@
-#! /bin/sh
-
-TMP_CORE=/tmp/new_core
-# first test if we can contact the log server.
-# if not abort directly the core file takes up memory
-alive()
-{
-	ping -c1 $server
-
-	if [ $? != 0 ]
-	then
-		# drain core file from kernel
-		cat >/dev/null
-		exit 0
-	fi
-}
-
-fill_in_default()
-{
-    /sbin/uci add system log
-    /sbin/uci rename system.@log[-1]=corelog
-    /sbin/uci set system.corelog.enable=no
-    /sbin/uci set system.corelog.server="crash.inteno.se"
-    /sbin/uci commit
-}
-
-# is corelog enabled ?
-enable=$(/sbin/uci get system.corelog.enable)
-case $enable in
-    0|no|NO|false|FALSE)
-	# drain core file from kernel
-	cat >/dev/null
-	exit 0
-	;;
-    "")
-	fill_in_default
-	exit 0
-	;;
-esac
-
-server=$(/sbin/uci get system.corelog.server)
-
-alive
-
-# dump out the core to disk we need this as scp needs a size before we send data
-# and this is the only way to know how much data there is
-cat >$TMP_CORE
-
-# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
-# more memory to work with. normally this would do nothing.
-cat >/dev/null
-
-nr=$(db get hw.board.serialNumber)
-hw=$(db get hw.board.hardware)
-hwv=$(db get hw.board.hardwareVersion)
-bid=$(db get hw.board.boardId)
-sw=$(db get hw.board.iopVersion)
-
-scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
-rm $TMP_CORE
-

crashlog/files/usr/sbin/logssh

@@ -1,6 +0,0 @@
-#!/bin/sh
-# we need to have the -y option to dropbear to not halt the scp when
-# transfering the log file to a new server for the first time.
-# since we already need this also put in the keyfile
-
-ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -1,42 +0,0 @@
-Install scp server.
-
-Create a user account on a server and make sure it's possible to login to it
-using ssh.
-
-For now the user has to be called "log"
-
-USER is the user name of the account
-HOME is the user home directory.
-Both should be changed to the correct value in all following example commands.
-
-create HOME/bin
-Put scp_upload in HOME/bin
-make it executable "chmod a+x HOME/bin/scp_upload" 
-
-create home/.ssh   (observer the dot .shh)
-
-create an empty file HOME/.ssh/authorized_keys
-
--------------------------------
-Now everyhting is setup for use but we have not added any clients.
-What we need is the public key for the clients.
-
-For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
-
-----------
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
-----------
-
-The public key should be just one line. Add that line to the 
-HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
-the first text on the same line. that is insert before the key data.
-
-command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
-
-Do not forget to change HOME to the correct value for the server and there 
-should be one space separating the key data and the above text.
----------------------------------
-Now test to make sure that you can upload new files, not download files
-and not overwrite files from the client.
-
-

crashlog/scp_upload

@@ -1,53 +0,0 @@
-#! /bin/bash
-# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
-
-val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
-if [ $val != 3 ]
-then
-    echo "only scp is allowed for this rsa key"
-    exit 1
-fi
-
-#strip out "scp" as getopts barf on anything not an option
-
-args=${SSH_ORIGINAL_COMMAND:3}
-
-# we must set args to positional paramters otherwise it's next to impossible
-# to get to the rest of the line that is not arguments.
-
-set -- $args
-while getopts "rftdvpq" Option
-do
-  case $Option in
-    r ) echo "recursive not allowed";exit 1;;
-    f ) echo "reading files not allowed";exit 1;;
-    t ) ;;
-    d ) ;;
-    v ) ;;
-    p ) ;;
-    q ) ;;
-    * ) ;;   # Default.
-  esac
-done
-
-shift $(($OPTIND - 1))
-
-file="$*"
-dir=$(dirname "$file")
-
-if [ "$dir" != "log" ]
-then
-    echo "only allowed to write to log/"
-    exit 1
-fi
-
-# try to create uniq files
-EXTRA=$((0))
-while [ -e "${file}_${EXTRA}" ]
-do
-    EXTRA=$((EXTRA +1))
-done
-
-logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
-
-exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Config.in

@@ -0,0 +1,11 @@
+if PACKAGE_dectmngr
+
+menu "Configuration"
+
+config ENABLE_LINE_SETTINGS_EXTENSION
+	bool "Enable Line Settings List extension "
+	default y
+
+endmenu
+
+endif

dectmngr/Makefile

@@ -0,0 +1,74 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dectmngr
+PKG_RELEASE:=3
+PKG_VERSION:=3.5.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=81450033d98fcdb68911e2148f48d190492090a6
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+ 	TITLE:=DECT Manager
+	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
+endef
+
+define Package/$(PKG_NAME)/description
+	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
+endef
+
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config.in"
+endef
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+TARGET_CFLAGS += \
+	-Wall \
+        -Werror \
+	-I$(STAGING_DIR)/usr/include/libxml2
+
+ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
+TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
+endif
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/dectmngr
+	$(CP) ./files/etc/* $(1)/etc/
+	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -0,0 +1,3 @@
+config dect 'global'
+ 	option log_dect_cmbs 'syslog'
+        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -0,0 +1,100 @@
+#!/bin/sh /etc/rc.common
+
+source /lib/functions/uci-defaults.sh
+
+START=70
+STOP=12
+
+USE_PROCD=1
+NAME=dectmngr
+PROG=/usr/sbin/dectmngr
+LOG_PATH=/var/log/dectmngr
+DB_PATH=/etc/dect
+
+DECT_GPIO=$(db -q get hw.board.dect_gpio)
+
+# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
+stop_and_wait_dectmngr() {
+	pidof $NAME && killall -q $NAME
+
+	pidof $NAME && sleep 2 # wait for the process to stop gracefully
+	while pidof $NAME; do
+		killall -q -9 $NAME 
+		sleep 1
+	done
+}
+
+start_service() {
+	local opt_ext=
+	local rfpi=
+	local model_id=
+	local rxtun=
+
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+
+	rfpi=$(db -q get hw.board.dect_rfpi)
+	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
+
+	model_id=$(db -q get hw.board.dect_model_id)
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
+		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
+		model_id="30.3B.06"
+	}
+	opt_ext="$opt_ext -model $model_id"
+
+	rxtun=$(db -q get hw.board.dect_rxtun)
+	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+
+	config_load dect
+	config_get log_dect_cmbs global log_dect_cmbs syslog
+
+	procd_open_instance
+	if [ "$log_dect_cmbs" = "none" ]; then
+		echo "Starting dectmngr with cmbs logging disabled"
+		procd_set_param command $PROG -comname ttyH0 $opt_ext
+		rm -f $LOG_PATH/*
+	elif [ "$log_dect_cmbs" = "file" ]; then
+		echo "Starting dectmngr with cmbs logging enabled to file"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
+	else
+		echo "Starting dectmngr with cmbs logging enabled to syslog"
+		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
+		rm -f $LOG_PATH/*
+	fi
+
+	procd_set_param respawn 6 2 3
+	procd_set_param term_timeout 20
+	procd_set_param triggers asterisk
+	procd_close_instance
+}
+
+stop_service() {
+	test $(db get hw.board.hasDect) = "0" && return
+
+	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	stop_and_wait_dectmngr
+}
+
+reload_service() {
+	ubus call dect reload
+}
+
+service_triggers()
+{
+	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
+	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+}
+
+boot() {
+	[ -n "$DECT_GPIO" ] && {
+		echo ${DECT_GPIO} > /sys/class/gpio/export
+		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
+	}
+
+	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
+	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
+	start
+}
+

dectmngr/files/lib/upgrade/keep.d/dect

@@ -0,0 +1 @@
+/etc/dect/LA_DB

dectmngr2/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_RELEASE:=1
-PKG_VERSION:=1.2.0
-PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=877fcbd58d0ead82dbbc4c65f0ad7f8c938fcf74
-PKG_NAME:=dectmngr2
-
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/dectmngr2
-  CATEGORY:=Utilities
-  TITLE:=Dectmngr2
-  URL:=
-  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
-endef
-
-define Package/dectmngr2/description
-	Dectmngr2
-endef
-
-
-define Package/dectmngr2/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/dect/
-	$(INSTALL_DIR) $(1)/etc/config/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
-	$(CP) ./files/dect.config $(1)/etc/config/dect
-endef
-
-$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

dslmngr/Makefile

@@ -0,0 +1,79 @@
+#
+# Copyright (C) 2018 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dslmngr
+PKG_VERSION:=1.2.0
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+
+include $(INCLUDE_DIR)/package.mk
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+else
+  $(info Unexpected CONFIG_TARGET)
+endif
+
+export TARGET_PLATFORM
+
+define Package/dslmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=XDSL status and configration utility
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
+endef
+
+define Package/dslmngr/description
+ This package can be used to configure and provide status about
+ the XDSL subsystem through UBUS.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-I$(STAGING_DIR)/usr/include/xdsl \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+define Build/Compile
+	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
+endef
+
+define Package/dslmngr/install
+	$(CP) ./files/common/* $(1)/
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	$(CP) ./files/broadcom/* $(1)/
+endif
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,dslmngr))

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -0,0 +1,311 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+# ATM #
+check_pvc() {
+	local vpi=$1
+	local vci=$2
+	local ret
+
+	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+check_xtm_list() {
+	local qclass=$1
+	local pcr scr mbs
+	local ret
+
+	case $# in
+		1)
+			pcr=0
+			scr=0
+			mbs=0
+		;;
+		2)
+			pcr=$2
+			scr=0
+			mbs=0
+		;;
+		4)
+			pcr=$2
+			scr=$3
+			mbs=$4
+		;;
+	esac
+
+	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_atm_device() {
+	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
+
+	config_get name $1 name "ATM"
+	config_get vpi $1 vpi "8"
+	config_get vci $1 vci "35"
+	config_get device $1 device "atm0"
+	config_get link_type $1 link_type "eoa"
+	config_get encapsulation $1 encapsulation "llc"
+	config_get qos_class $1 qos_class "ubr"
+	config_get pcr $1 pcr
+	config_get mbs $1 mbs
+	config_get scr $1 scr
+
+	check_pvc $vpi $vci
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret=$?
+
+		if [ "$ret" -eq 0 ]; then
+			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+				ubr)
+					xtmctl operate tdte --add "$qos_class"
+				;;
+				ubr_pcr|ubr+)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				cbr)
+					xtmctl operate tdte --add "$qos_class" $pcr
+				;;
+				nrtvbr|vbr-nrt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				rtvbr|vbr-rt)
+					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
+				;;
+				gfr)
+				;;
+				abr)
+				;;
+			esac
+		fi
+
+		case $link_type in # EoA, IPoA, PPPoA, CIP
+			EoA|eoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
+			;;
+			PPPoA|pppoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
+			;;
+			IPoA|ipoa)
+				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
+			;;
+			CIP|cip)
+			;;
+		esac
+
+		check_xtm_list $qos_class $pcr $scr $mbs
+		ret="$?"
+
+		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
+		done
+		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_atm_devices() {
+	local vpi vci rest
+	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
+
+	for i in $vpivci
+	do
+		rest=${i#\/}
+		vpi=${rest%%\/*}
+		vci=${rest#*\/}
+		echo "xtmctl operate conn --delete 1.$vpi.$vci"
+		xtmctl operate conn --delete 1.$vpi.$vci
+		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
+		xtmctl operate conn --deletenetdev 1.$vpi.$vci
+	done
+}
+
+create_atm_devices() {
+	echo "Creating ATM Device(s)"
+	config_load dsl
+	config_foreach configure_atm_device atm-device
+}
+# ATM END #
+
+# PTM #
+check_ptm() {
+	local ret
+	local ptmprio=$1
+	local dslat=$2
+
+	if [ "$ptmprio" -eq 2 ]; then
+		ptmprio="high"
+	else
+		ptmprio="low"
+	fi
+
+	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
+
+	case $ret in
+		''|*[!0-9]*) return 0 ;;
+		*) return $ret ;;
+	esac
+}
+
+configure_ptm_device() {
+	local name device priority portid i
+
+	config_get name $1 name "PTM"
+	config_get device $1 device "ptm0"
+	config_get priority $1 priority 1
+	config_get portid $1 portid 1
+
+	check_ptm $priority $portid
+	ret=$?
+
+	if [ "$ret" -eq 0 ]; then
+		xtmctl operate conn --add $portid.$priority
+
+		for i in `seq 0 7`; do
+			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
+		done
+		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
+		xtmctl operate conn --createnetdev $portid.$priority $device
+		xtmctl operate intf --state 1 enable
+	fi
+}
+
+remove_ptm_devices() {
+	local delptm
+	local x=0
+
+	IFS=$'\n'
+	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
+	do
+		if [ $x -eq 1 ]; then
+			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
+			echo "xtmctl operate conn --delete $delptm"
+			xtmctl operate conn --delete $delptm
+			xtmctl operate conn --deletenetdev $delptm
+		fi
+		x=1
+	done
+	unset IFS
+}
+
+create_ptm_devices() {
+	echo "Creating PTM Device(s)"
+	config_load dsl
+	config_foreach configure_ptm_device ptm-device
+}
+# PTM END #
+
+prioritize_arp()
+{
+      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
+}
+
+xtm_remove_devices() {
+	remove_atm_devices
+	remove_ptm_devices
+}
+
+xtm_create_devices() {
+	local tpstc="$(xdslctl info --show | grep TPS-TC)"
+	if echo "$tpstc" | grep -q "ATM Mode"; then
+		create_atm_devices
+	elif echo "$tpstc" | grep -q "PTM Mode"; then
+		create_ptm_devices
+	fi
+}
+
+xdsl_configure() {
+	local VDSL=0
+	local GFAST=0
+	local mod=""
+	local modes=""
+	local profile=""
+
+	config_load dsl
+
+	# Modes
+	config_get mode line mode
+	for mod in $mode; do
+		[ $mod == "gdmt" ] && modes="${modes}d"
+		[ $mod == "glite" ] && modes="${modes}l"
+		[ $mod == "t1413" ] && modes="${modes}t"
+		[ $mod == "adsl2" ] && modes="${modes}2"
+		[ $mod == "adsl2p" ] && modes="${modes}p"
+		[ $mod == "annexl" ] && modes="${modes}e"
+		[ $mod == "annexm" ] && modes="${modes}m"
+		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
+		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
+	done
+
+	# VDSL Profiles
+	config_get profile line profile
+	# Capabilities
+	config_get_bool bitswap line bitswap 1
+	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
+	config_get_bool sra line sra 1
+	[ $sra -eq 1 ] && sra="on" || sra="off"
+#	config_get_bool trellis line trellis 1
+	config_get_bool sesdrop line sesdrop 0
+	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
+	# VDSL2 only
+	config_get_bool us0 line us0 1
+	[ $us0 -eq 1 ] && us0="on" || us0="off"
+#	config_get_bool dynamicd line dynamicd 1
+#	config_get_bool dynamicf line dynamicf 1
+	config_get_bool sos line sos 0
+	[ $sos -eq 1 ] && sos="on" || sos="off"
+
+	config_get_bool phyReXmtUs line phyReXmtUs 0
+	config_get_bool phyReXmtDs line phyReXmtDs 1
+	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
+
+	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
+		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	else
+		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
+		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
+	fi
+
+	if [ $GFAST -eq 1 ]; then
+		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
+		# Enable V43 tone for GFAST.
+		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
+		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
+	fi
+}
+
+xdsl_stop() {
+	# echo "Stopping DSL"
+	# stop causes IRQ issues
+	# xdslctl stop
+	return 0
+}
+
+xdsl_init() {
+	prioritize_arp
+
+	echo "Starting DSL"
+
+	xtmctl start
+	xtmctl operate intf --state 1 enable
+}

dslmngr/files/common/etc/config/dsl

@@ -0,0 +1,53 @@
+# OEM specific parameters
+config oem-parameters 'oem'
+#	option country_code "0000"   # 2 bytes hex
+#	option vendor_id "IO"        # 4 bytes string
+#	option vendor_suffix "0000"  # 2 bytes hex
+#	option sw_version "iopsys"   # 16 bytes string
+#	option serial_nr "00000000"  # 32 bytes string
+
+# DSL Modes
+config dsl-line line
+	list mode gdmt
+	list mode glite
+	list mode t1413
+	list mode adsl2
+	list mode adsl2p
+	list mode annexl
+	list mode annexm
+	list mode vdsl2
+	# VDSL2 profiles
+	list profile 8a
+	list profile 8b
+	list profile 8c
+	list profile 8d
+	list profile 12a
+	list profile 12b
+	list profile 17a
+	list profile 30a
+	option bitswap 1
+	option sra 1
+	option us0 1 # VDSL2 only
+	option sesdrop 0
+	option sos 0
+	option phyReXmtUs 0
+	option phyReXmtDs 1
+
+config atm-device atm0
+	option name 'ATM'
+	option vpi '8'
+	option vci '35'
+	option device atm0
+	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
+	option encapsulation 'llc' # llc, vcmux
+	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
+#	option pcr '512'
+#	option scr '256'
+#	option mbs '1024'
+
+config ptm-device ptm0
+	option name 'PTM'
+	option device 'ptm0'
+	option priority '1'
+	option portid '1'
+

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -0,0 +1,7 @@
+[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
+
+. /lib/functions.sh
+include /lib/dsl
+
+xtm_remove_devices
+xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -0,0 +1,7 @@
+if [ "$STATUS" == "up" ]; then
+	ubus call led.dsl set '{"state":"ok"}'
+elif [ "$STATUS" == "down" ]; then
+	ubus call led.dsl set '{"state":"off"}'
+elif [ "$STATUS" == "training" ]; then
+	ubus call led.dsl set '{"state":"alert"}'
+fi

dslmngr/files/common/etc/init.d/dsl

@@ -0,0 +1,48 @@
+#!/bin/sh /etc/rc.common
+
+. /lib/functions.sh
+include /lib/dsl
+
+START=20
+USE_PROCD=1
+
+DSLMNGR=$(which dslmngr)
+
+start_service() {
+	[ -n "$DSLMNGR" ] && {
+		procd_open_instance
+		procd_set_param command "$DSLMNGR"
+		procd_set_param respawn
+		procd_close_instance
+	}
+
+	xdsl_configure
+	xtm_create_devices
+}
+
+stop_service() {
+	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
+
+	xtm_remove_devices
+	xdsl_stop
+}
+
+boot() {
+	local HASADSL="$(db -q get hw.board.hasAdsl)"
+	local HASVDSL="$(db -q get hw.board.hasVdsl)"
+	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
+
+	xdsl_init
+
+	start
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+        procd_add_reload_trigger dsl
+}
+

easy-qos/Makefile

@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# 
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-qos
+PKG_VERSION:=1.1
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-qos
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=Easy QoS
+  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+endef
+
+define Package/easy-qos/description
+	This package contains Easy QoS utility
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/easy-qos/install
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
+endef
+
+$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -0,0 +1 @@
+/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+log() {
+	echo "${@}"|logger -t easy_qos.ebtable -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	while [ -n "${rule}" ]; do
+		exec_log ebtables -t broute -D BROUTING ${rule}
+		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
+	done
+}
+
+create_rule() {
+	local protocol=$1; shift
+	local mac=$1; shift
+	local mark="0x$1"; shift
+	local forward_port=$1;
+	local cmd="";
+	local protocol_number
+
+	cmd="-j mark --mark-or ${mark}";
+	if [ -n "${forward_port}" ]; then
+		cmd="--ip-destination-port ${forward_port} ${cmd}";
+	fi
+	
+	case "${protocol}" in
+		"tcp")
+			protocol_number=6;;
+		"udp")
+			protocol_number=17;;
+		"dccp")
+			protocol_number=33;;
+		"sctp")
+			protocol_number=132;;
+		*)
+			log "Protocol ${protocol} not supported in ebtables"
+			return;;
+	esac
+			
+	cmd="--ip-proto ${protocol_number} $cmd"
+	cmd="-p ip $cmd"
+
+	cmd="-s ${mac} $cmd"
+	exec_log ebtables -t broute -A BROUTING ${cmd}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num protocol
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	prio_num=$(get_priority ${priority})
+	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
+		for p in ${port}; do
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num} ${p}
+				create_rule udp ${macaddr} ${prio_num} ${p}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
+			fi
+		done
+		# Create rule for all ports if port is not mentioned in uci
+		if [ -z "${port}" ]; then
+			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
+				create_rule tcp ${macaddr} ${prio_num}
+				create_rule udp ${macaddr} ${prio_num}
+			else
+				create_rule ${protocol} ${macaddr} ${prio_num}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	# Do not apply rules if ebtables is not present in system
+	[ -x /usr/sbin/ebtables ] || return;
+
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+}
+
+start_service() {
+	reload_service
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -0,0 +1,186 @@
+#!/bin/sh /etc/rc.common
+
+. /usr/share/libubox/jshn.sh
+
+START=99
+USE_PROCD=1
+
+CLIENT_LIST="/tmp/easy_qos_client.list"
+
+log() {
+	echo "${@}"|logger -t easy_qos -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+get_priority() {
+	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	case "${prio}" in
+		"lowest")
+			echo 0;;
+		"low")
+			echo 1;;
+		"besteffort")
+			echo 2;;
+		"normal")
+			echo 3;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 5;;
+		"high")
+			echo 6;;
+		"highest")
+			echo 7;;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+#	json_add_array "clients"
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
+	done
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark="0x$1/0x$1"; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j MARK --set-xmark ${mark}";
+	if [ -n "${ports}" ]; then
+		cmd="--match multiport --dports ${ports} ${cmd}";
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd} 
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num ip port_list
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	ip=$(get_ipaddress ${macaddr})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+
+	if [ -n "${ip}" -a -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${ip} ${prio_num} ${port_list}
+			create_rule udp ${ip} ${prio_num} ${port_list}
+		else
+			create_rule ${proto} ${ip} ${prio_num} ${port_list}
+		fi
+	fi
+}
+
+reload_service() {
+	clear_existing_rules
+	map_client_entries
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	reload_service
+	echo "Easy QoS installed">/dev/console;
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos"
+}
+

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -0,0 +1,8 @@
+# Add firewall include
+uci -q batch <<-EOT
+        delete firewall.easyqos
+        set firewall.easyqos=include
+        set firewall.easyqos.path=/etc/firewall.easyqos
+        set firewall.easyqos.reload=1
+        commit firewall
+EOT

easy-soc-events/Makefile

@@ -0,0 +1,110 @@
+# All rights reserved.
+# See LICENSE for more information.
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=easy-soc-events
+PKG_VERSION:=1.1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
+PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+
+include $(INCLUDE_DIR)/package.mk
+
+-include $(TOPDIR)/.config
+
+ifneq ($(CONFIG_TARGET_brcmbca),)
+  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
+  LINUX_VERSION := 4.1.52
+  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
+  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
+  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
+  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
+  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
+endif
+
+
+define KernelPackage/easy-soc-events/default
+  SUBMENU:=Other modules
+endef
+
+define KernelPackage/easy-soc-events
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Helper module for netlink event notification
+  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
+  AUTOLOAD:=$(call AutoLoad,11,easyevent)
+endef
+
+define KernelPackage/easy-soc-events-test
+  $(KernelPackage/easy-soc-events/default)
+  TITLE:=Test module for event notification through easyevent
+  DEPENDS+=+kmod-easy-soc-events
+  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
+endef
+
+
+define KernelPackage/easy-soc-events/description
+  This is a helper module to generate and pass netlink events from
+  kernel to user applications.
+endef
+
+#NOSTDINC_FLAGS :=
+
+ifdef CONFIG_PACKAGE_kmod-easy-soc-events
+  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
+endif
+
+LINUXINCLUDE += \
+		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
+		-Iarch/$(LINUX_KARCH)/include \
+		-Iarch/$(LINUX_KARCH)/include/generated \
+		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
+		-I$(LINUX_DIR)/include/generated/uapi \
+		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
+		-include ./include/linux/kconfig.h
+
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+endef
+
+define Build/Compile
+	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
+		$(KERNEL_MAKE_FLAGS) V=1 \
+		$(PKG_MAKE_FLAGS) \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		LINUXINCLUDE="$(LINUXINCLUDE)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		modules
+endef
+
+
+ifneq ($(CONFIG_TARGET_brcmbca),)
+define KernelPackage/easy-soc-events/install-extra
+	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
+endef
+endif
+
+define KernelPackage/easy-soc-events/install
+	$(call KernelPackage/easy-soc-events/install-extra)
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
+	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
+	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
+	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
+endef
+
+$(eval $(call KernelPackage,easy-soc-events-test))
+$(eval $(call KernelPackage,easy-soc-events))

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -0,0 +1,159 @@
+#
+# Copyright (C) 2020 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=easy-soc-libs
+PKG_VERSION:=7.2.7
+PKG_RELEASE:=1
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=3d6d1347668408e77c327ddf81602e70af8b3d98
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
+PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/easy-soc-libs
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=IOPSYS Easy SoC libraries
+  SUBMENU:=IOPSYS Easy SoC libraries
+  DEPENDS:=+libopenssl
+  MENU:=1
+endef
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+  TARGET_PLATFORM=BROADCOM
+  TARGET_WIFI_TYPE=BROADCOM
+  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
+  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
+  TARGET_PLATFORM=TEST
+  TARGET_WIFI_TYPE=TEST
+  TARGET_CFLAGS +=-DIOPSYS_TEST
+else ifeq ($(CONFIG_TARGET_airoha),y)
+  TARGET_PLATFORM=ECONET
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_ECONET
+else ifeq ($(CONFIG_TARGET_ipq95xx),y)
+  TARGET_PLATFORM=IPQ95XX
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIPQ95XX
+else
+  $(info Unexpected CONFIG_TARGET, use default MAC80211)
+  TARGET_PLATFORM=MAC80211
+  TARGET_WIFI_TYPE=MAC80211
+  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+endif
+
+export TARGET_PLATFORM
+export TARGET_WIFI_TYPE
+
+subdirs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+ifneq ($(CONFIG_PACKAGE_libwifi),)
+TARGET_CFLAGS +=-DHAS_WIFI
+endif
+
+esl-pkgs := \
+	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
+	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
+	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
+	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
+	$(if $(CONFIG_PACKAGE_libqos),libqos)
+
+esl-pkgs-all := \
+	libeasy \
+	libwifiutils \
+	libwifi \
+	libdsl \
+	libethernet \
+	libqos
+
+ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
+  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
+endif
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/openssl \
+	-I$(STAGING_DIR)/usr/include/libnl3
+
+MAKE_FLAGS += \
+	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	FPIC="$(FPIC)" \
+	PLATFORM="$(TARGET_PLATFORM)" \
+	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
+	subdirs="$(subdirs)"
+
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
+endef
+endif
+
+include easy.mk
+include wifi.mk
+include dsl.mk
+include ethernet.mk
+include qos.mk
+
+ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
+	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
+define Build/Compile/rebuild
+	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
+	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
+		rm -f $(PKG_BUILD_DIR)/.config_*)
+endef
+endif
+
+STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+
+define Build/Compile
+	$(Build/Compile/rebuild)
+	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
+	$(call Build/Compile/Default)
+	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
+endef
+
+define Build/InstallDev
+	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/easy-soc-libs/install
+	:
+endef
+
+$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -0,0 +1,44 @@
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= xDSL library (libdsl)
+endef
+
+define Package/libdsl/config
+  if PACKAGE_libdsl
+	  config LIBDSL_DEBUG
+		depends on PACKAGE_libdsl
+		bool "Enable dsl debugging"
+		default n
+
+	  config LIBDSL_TEST
+		depends on PACKAGE_libdsl
+		bool "Enable dsl test program"
+		default n
+
+  endif
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+define Build/Compile/libdsl
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endef
+endif
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
+endef

easy-soc-libs/easy.mk

@@ -0,0 +1,29 @@
+
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/ethernet.mk

@@ -0,0 +1,27 @@
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig +TARGET_airoha:ecnt_api
+endef
+
+define Package/libethernet/config
+  config LIBETHERNET_DEBUG
+	depends on PACKAGE_libethernet
+	bool "Enable ethernet debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/qos.mk

@@ -0,0 +1,27 @@
+
+define Package/libqos
+  $(call Package/easy-soc-libs)
+  TITLE:= QoS library (libqos)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libqos/config
+  config LIBQOS_DEBUG
+	depends on PACKAGE_libqos
+	bool "Enable qos debugging"
+	default n
+
+endef
+
+define Build/InstallDev/libqos
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
+endef
+
+define Package/libqos/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
+endef
+

easy-soc-libs/wifi.mk

@@ -0,0 +1,49 @@
+
+define Package/libwifiutils
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi utility library (libwifiutils.so)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Build/InstallDev/libwifiutils
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifiutils/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
+endef
+
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
+endef
+
+define Package/libwifi/config
+  if PACKAGE_libwifi
+	  config LIBWIFI_DEBUG
+		depends on PACKAGE_libwifi
+		bool "Enable wifi debugging"
+		default n
+  endif
+endef
+
+
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+endef

endptmngr/Makefile

@@ -1,35 +1,37 @@
 #
-# Copyright (C) 2006-2010 OpenWrt.org
+# Copyright (C) 2018 IOPSYS Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
-
 include $(TOPDIR)/rules.mk
 
-PKG_RELEASE:=1
-PKG_VERSION:=0.2
-PKG_SOURCE_VERSION:=0cb8accbac3355b97a17064ec7da010a2c42db7b
-
-
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
-PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
-PKG_NAME:=endptmngr-open
-else
-PKG_SOURCE_URL:=git@private.inteno.se:endptmngr
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_NAME:=endptmngr
+PKG_VERSION:=0.6
+
+LOCAL_DEV=0
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
 endif
 
-RSTRIP:=true
+PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE_FILES:=LICENSE
+
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
 
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
+export CONFIG_BRCM_SDK_VER_504040
+export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -39,27 +41,28 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Brcmslic
+  TITLE:=Broadcom Voice Endpoint Manager
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
+  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
 endef
 
 define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(CONFIG_ENDPT_OPEN),y)
-
-define Build/Compile
+ifeq ($(LOCAL_DEV),1)
+define Build/Prepare
+        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
 endef
-
 endif
 
+TARGET_CFLAGS += \
+        -Wall \
+        -Werror
 
 define Package/endptmngr/install
+	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/dect.config

@@ -1,4 +0,0 @@
-
-config dect 'dect'
-	option radio 'auto'
-

endptmngr/files/etc/init.d/endptmngr

@@ -0,0 +1,27 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=endptmngr
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+	procd_open_instance
+	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_set_param nice -12
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger asterisk 
+}

ethmngr/Makefile

@@ -0,0 +1,60 @@
+#
+# Copyright (C) 2020 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=ethmngr
+PKG_VERSION:=2.1.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_MIRROR_HASH:=skip
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_LICENSE:=GPL-2.0-only
+PKG_LICENSE_FILES:=LICENSE
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ethmngr
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Ethernet status and configration utility
+  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+endef
+
+define Package/ethmngr/description
+ This package can be used to configure and provide status about
+ the ethernet interfaces and ports through UBUS.
+ It uses APIs from the libethernet.so library.
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include \
+	-I$(STAGING_DIR)/usr/include/libnl3 \
+	-D_GNU_SOURCE
+
+ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+define Build/Compile
+endef
+endif
+
+define Package/ethmngr/install
+	$(CP) ./files/common/* $(1)/
+ifneq ($(CONFIG_TARGET_brcmbca),)
+	$(CP) ./files/broadcom/* $(1)/
+else ifneq ($(CONFIG_TARGET_airoha),)
+	$(CP) ./files/airoha/* $(1)/
+else
+	$(CP) ./files/linux/* $(1)/
+endif
+ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx),)
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
+endif
+endef
+
+$(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -0,0 +1,208 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+unset -f switchmgr
+# alias for switchmgr
+switchmgr() {
+	"/userfs/bin/switchmgr" "$@"
+}
+
+unset -f tc3162_get_lan_port
+# get lan port port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_lan_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+
+	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
+	case "${ifname}" in
+	eth0.*)
+		;;
+	*)
+		logger -t "port-management" \
+		"unsupported - ${ifname} is not tc3162 switch port"
+		return 255
+		;;
+	esac
+
+	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
+	[[ -z "${if_idx}" ]] && return 255
+	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
+		logger -t "port-management" \
+		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
+		return 255
+	}
+	let "if_idx=${if_idx}-1"
+	return ${if_idx}
+}
+
+
+unset -f tc3162_get_mapped_port
+# get mapped switch port by ifname
+# arg1: port ifname, ex: eth0.1
+tc3162_get_mapped_port() {
+	[[ -z "$1" ]] && return 255
+
+	local ifname="$1"
+	local if_idx=255
+	local prtmap_procfile="/proc/tc3162/eth_portmap"
+	local lan_prt=255
+	local port=255
+	local prtmap_out_line_num=4
+	local prtmap_out_line=""
+	
+	# check "lan port map" marker in portmap output string
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
+
+	tc3162_get_lan_port "${ifname}"
+	let "if_idx=$?"
+	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
+
+	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
+	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
+	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
+
+	# get and check lan port index from lan portmapping string
+	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
+	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
+
+	# get and check mapped port from lan portmapping string
+	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
+	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
+
+	return ${port}
+}
+
+unset -f get_max_port_speed
+# arg1: port ifname, ex: eth0.1
+get_max_port_speed() {
+	[[ -z "$1" ]] && { echo 0; return; }
+
+	local ifname="$1"
+	local port=255
+	local speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	# tc3162 capability for all ports is 1Gbps
+	speed=1000
+
+	echo $speed
+}
+
+unset -f power_updown
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+power_updown() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local port=255
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+
+	switchmgr phy admin "${port}" "${enabled}"
+}
+
+unset -f set_port_settings
+# arg1: port ifname, ex: eth0.1
+# arg2: port enabled, ex: 0/1/off/on/..
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: 0/1/off/on/..
+# arg6: port eee, ex: 0/1/off/on/..
+# arg7: port pause, ex: 0/1/off/on/..
+set_port_settings() {
+	[[ -z "$1" ]] && return
+	[[ -z "$2" ]] && return
+	[[ -z "$3" ]] && return
+	[[ -z "$4" ]] && return
+	[[ -z "$5" ]] && return
+	[[ -z "$6" ]] && return
+	[[ -z "$7" ]] && return
+
+	local ifname="$1"
+	local enabled="$2"
+	local speed="$3"
+	local duplex="$4"
+	local autoneg=$5
+	local eee="$6"
+	local pause="$7"
+	local port=255
+	local speedmode=1
+	local last_speed=0
+
+	[[ -d "/sys/class/net/${ifname}" ]] || {
+		logger -t "port-management" "interface ${ifname} is not found"
+		return
+	}
+	
+	let "enabled=$(get_bool "${enabled}" "-1")"
+	[[ ${enabled} -eq -1 ]] && return
+
+	let "autoneg=$(get_bool "${autoneg}" "-1")"
+	[[ ${autoneg} -eq -1 ]] && return
+
+	let "eee=$(get_bool "${eee}" "-1")"
+	[[ ${eee} -eq -1 ]] && return
+	
+	let "pause=$(get_bool "${pause}" "-1")"
+	[[ ${pause} -eq -1 ]] && return
+	
+	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
+	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
+
+	tc3162_get_lan_port "${ifname}"
+	let "port=$?"
+	[[ -z "${port}" || ${port} -eq 255 ]] && return
+	
+	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
+	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
+		&& last_speed=${speed}
+	
+	switchmgr phy pause "${port}" "${pause}"
+
+	# set speedmode: speed+duplex+autoneg
+# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
+	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
+		switchmgr phy speedmode ${port} "1"
+	else
+		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
+		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
+		switchmgr phy speedmode "${port}" "${speedmode}"
+	fi
+	
+# TODO: implement MAC control register manipulations (mapped ports used) for
+	# eee settings change
+	# separate (tx/rx) pause (flow control) settings change
+	# set speed to 1Gbps separately from autoneg mode
+	
+# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
+	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
+
+	power_updown "${ifname}" ${enabled}
+
+}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -0,0 +1,140 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
+	local speed=1000
+
+	case "$phycap" in
+		10GFD) speed=10000 ;;
+		5GFD) speed=5000 ;;
+		2.5GFD) speed=2500 ;;
+		1GFD|1GHD) speed=1000 ;;
+		100MFD|100MHD) speed=100 ;;
+		10MFD|10MHD) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port name, ex: eth0
+get_port_number() {
+	[ -z "$1" ] && return
+	local ports="0 1 2 3 4 5 6 7"
+	local units="0 1"
+	local port="$1"
+	local ifname
+
+	for unit in $units; do
+		for prt in $ports; do
+			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
+			if [ "$ifname" == "$port" ]; then
+				echo "$unit $prt"
+				return
+			fi
+		done
+	done
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ethctl $ifname phy-power $updown >/dev/null
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	local unitport="$(get_port_number $ifname)"
+	local unit=$(echo $unitport | cut -d ' ' -f 1)
+	local port=$(echo $unitport | cut -d ' ' -f 2)
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	[ "$duplex" == "half" ] && duplex=0 || duplex=1
+	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
+	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
+
+	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
+	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
+	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
+	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
+
+	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
+	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
+
+	if [ "$numofcaps" == "1" ]; then
+		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
+	else
+		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
+		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
+	fi
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+	if [ "$auto" == "on" ]; then
+		# Use ethswctl utility to set pause autoneg
+		# as ethtool is not setting it properly
+		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
+	else
+		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+	fi
+
+	power_updown $ifname $enabled
+}

ethmngr/files/common/etc/init.d/ethmngr

@@ -0,0 +1,50 @@
+#!/bin/sh /etc/rc.common
+
+START=15
+STOP=90
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+. /lib/functions.sh
+include /lib/ethernet
+
+configure_ethernet_port(){
+	local cfg=$1
+	local ifname enabled speed duplex autoneg eee pause
+
+	config_get ifname $cfg ifname
+	[ -d /sys/class/net/$ifname ] || return
+
+	config_get enabled $cfg enabled 1
+	config_get speed $cfg speed 1000
+	config_get duplex $cfg duplex "full"
+	config_get autoneg $cfg autoneg 1
+	config_get eee $cfg eee 0
+	config_get pause $cfg pause 0
+
+	set_port_settings $ifname $enabled $speed $duplex $autoneg $eee $pause
+}
+
+start_service() {
+	if [ -s /etc/config/ports ]; then
+		config_load ports
+		config_foreach configure_ethernet_port ethport
+	fi
+
+	if [ -f $PROG ]; then
+		procd_open_instance
+		procd_set_param command ${PROG}
+		procd_set_param respawn
+		procd_close_instance
+	fi
+}
+
+reload_service() {
+        stop
+        start
+}
+
+service_triggers() {
+	procd_add_reload_trigger ports
+}

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -0,0 +1,81 @@
+#!/bin/sh
+
+populate_config_from_db() {
+	. /lib/functions.sh
+	. /lib/network/utils.sh
+	include /lib/ethernet
+
+	portorder="$(db -q get hw.board.ethernetPortOrder)"
+	for port in $portorder; do
+		speed="$(get_max_port_speed $port 2>/dev/null)"
+		speed="${speed:-1000}"
+
+		uci add ports ethport
+		uci rename ports.@ethport[-1]="$(get_port_name $port)"
+		uci set ports.@ethport[-1].enabled=1
+		uci set ports.@ethport[-1].name="$(get_port_name $port)"
+		uci set ports.@ethport[-1].ifname="$port"
+		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].duplex="full"
+		uci set ports.@ethport[-1].autoneg=1
+		uci set ports.@ethport[-1].eee=0
+		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
+			uci set ports.@ethport[-1].pause=1
+			uci set ports.@ethport[-1].uplink=1
+		else
+			uci set ports.@ethport[-1].pause=0
+		fi
+	done
+
+	uci commit ports
+}
+
+populate_config_from_device_tree() {
+	for path in $(find /proc/device-tree/ -name "port@*"); do
+		port="$(cat $path/label)"
+		[ -n "$port" ] || continue
+		[ "$port" = "cpu" ] && continue
+		speed=1000
+		if [ -e "$path/phy-mode" ]; then
+			phymode="$(cat $path/phy-mode)"
+			case "$phymode" in
+				10000*) speed=10000 ;;
+				2500*) speed=2500 ;;
+			esac
+		fi
+		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
+		uci add ports ethport
+		uci rename ports.@ethport[-1]="$PORT"
+		uci set ports.@ethport[-1].enabled=1
+		uci set ports.@ethport[-1].name="$PORT"
+		uci set ports.@ethport[-1].ifname="$port"
+		uci set ports.@ethport[-1].speed="$speed"
+		uci set ports.@ethport[-1].duplex="full"
+		uci set ports.@ethport[-1].autoneg=1
+		uci set ports.@ethport[-1].eee=0
+		if [ "$port" = "wan" ]; then
+			uci set ports.@ethport[-1].pause=1
+			uci set ports.@ethport[-1].uplink=1
+		else
+			uci set ports.@ethport[-1].pause=0
+		fi
+	done
+	uci commit ports
+}
+
+if [ -s "/etc/config/ports" ]; then
+	if uci -q get ports.@ethport[0] >/dev/null; then
+		# exit if there is any valid content
+		exit 0
+	else
+		rm -f /etc/config/ports
+	fi
+fi
+
+touch /etc/config/ports
+
+if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
+	populate_config_from_db
+elif [ -d /proc/device-tree/ ]; then
+	populate_config_from_device_tree
+fi

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -0,0 +1,95 @@
+# arg1: port ifname, ex: eth0
+get_max_port_speed() {
+	if [ -z "$1" ]; then
+		echo 0
+		return
+	fi
+
+	local ifname="$1"
+	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
+	local speed=1000
+
+	case "$phycap" in
+		10000*) speed=10000 ;;
+		5000*) speed=5000 ;;
+		2500*) speed=2500 ;;
+		1000*) speed=1000 ;;
+		100*) speed=100 ;;
+		10*) speed=10 ;;
+	esac
+
+	echo $speed
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+power_updown() {
+	local ifname="$1"
+	local enabled=$2
+
+	local updown="up"
+	[ $enabled -eq 0 ] && updown="down"
+	ip link set dev $ifname $updown
+}
+
+# arg1: port ifname, ex: eth0
+# arg2: port enabled, ex: 1
+# arg3: port speed, ex: 1000
+# arg4: port duplex, ex: full
+# arg5: port autoneg, ex: on
+# arg6: port eee, ex: 0
+# arg7: port pause, ex: 0
+set_port_settings() {
+	local ifname="$1"
+	local enabled=$2
+	local speed="$3"
+	local duplex=$4
+	local autoneg=$5
+	local eee=$6
+	local pause=$7
+
+	[ -d /sys/class/net/$ifname ] || return
+
+	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
+	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
+
+	[ $eee -eq 1 ] && eee="on" || eee="off"
+	ethtool --set-eee $ifname eee $eee 2>/dev/null
+
+	case $pause in
+		off|0)
+			pause=0x0
+			auto=off
+			rx=off
+			tx=off
+		;;
+		on|1)
+			pause=0x2
+			auto=off
+			rx=on
+			tx=on
+		;;
+		auto)
+			pause=0x1
+			auto=on
+			rx=on
+			tx=on
+		;;
+		tx)
+			pause=0x3
+			auto=off
+			rx=off
+			tx=on
+		;;
+		rx)
+			pause=0x4
+			auto=off
+			rx=on
+			tx=off
+		;;
+	esac
+
+	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
+
+	power_updown $ifname $enabled
+}

eventlog/Makefile

@@ -1,49 +0,0 @@
-#
-# Copyright (C) 2009-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=eventlog
-PKG_VERSION:=0.2.9
-PKG_RELEASE:=2
-
-PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
-PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
-PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
-
-PKG_FIXUP:=autoreconf
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libeventlog
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=A new API to format and send structured log messages.
-endef
-
-define Package/eventlog/description
-  A new API to format and send structured log messages. It supports multiple message
-  representations (plain, XML attributes and XML tags) and multiple output methods
-  (local syslogd).
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
-endef
-
-define Package/libeventlog/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libeventlog))

evoice/Makefile

@@ -0,0 +1,106 @@
+#
+# Copyright (C) 2022 IOPSYS Software Solutions AB
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=evoice
+PKG_VERSION:=0.2.39
+
+LOCAL_DEV=0
+LOCAL_DEV_EVOICE_DIR=~/voip/evoice
+
+ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
+PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+endif
+
+PKG_LICENSE:=PROPRIETARY IOPSYS
+PKG_LICENSE_FILES:=LICENSE
+
+# All config variable that are passed to the make invocation, directly or
+# indirectly. This ensures that the package is rebuilt on config-changes.
+#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Network
+	SUBMENU:=Telephony
+	TITLE:=Ensemble Voice
+	URL:=
+	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
+		+TARGET_brcmbca:bcmkernel\
+		+TARGET_airoha:kmod-voip_driver\
+		+TARGET_airoha:voip_app +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	Ensemble Voice. A stand alone SIP VoIP application. 
+endef
+
+ifeq ($(LOCAL_DEV),1)
+# If you want to build the code from your own local repositiory enable
+# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
+define Build/Prepare
+	@echo "======================================================="
+	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
+	@echo "======================================================="
+	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
+endef
+endif
+
+IDIR = $(STAGING_DIR)/usr/include
+TONES_INI_REQUIRED=
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	TARGET_PLATFORM=BROADCOM
+	BDIR = bcm963xx/userspace/private/apps/voice
+	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
+		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
+		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
+	TRG=SVrgBcmFxs
+	JSONFILE=codecs_brcm.json
+else ifeq ($(CONFIG_TARGET_airoha),y)
+	TARGET_PLATFORM=ECONET
+	TONES_INI_REQUIRED=y
+	TRG=SVrgMtekOwrt
+	JSONFILE=codecs_airoha.json
+endif
+
+# disable temporarily some not important warnings, force PIC
+CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
+
+export TARGET_PLATFORM
+
+#used and altered by BIDE makefiles
+export _XFLAGS
+
+BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
+	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
+
+define Build/Compile
+	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
+
+	@echo "clean libvoiceservice before building shared lib!"
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
+	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
+endef
+
+define Package/evoice/install
+	$(CP) ./files/* $(1)/
+	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
+	$(RM) $(1)/lib/voice/codecs_brcm.json
+	$(RM) $(1)/lib/voice/codecs_airoha.json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
+endef
+
+$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -0,0 +1,334 @@
+
+config SIPClient 'Client1'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51234'
+	option AuthPassword '51234'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51234@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPClient 'Client2'
+	option Enable '1'
+	option RegisterMode 'RFC3261'
+	option AuthUserName '51235'
+	option AuthPassword '51235'
+	option Network 'Network1'
+	option MaxSessions '5'
+	option RegisiterURI '51235@sip-proxy.iopsys.eu'
+	option E164Format '1'
+
+config SIPNetwork 'Network1'
+	option Enable '1'
+	option ProxyServer 'sip-proxy.iopsys.eu'
+	option AcceptFromProxyOnly '0'
+	option ProxyServerPort '5060'
+	option ProxyServerTransport 'UDP'
+	option RegistrarServer 'sip-proxy.iopsys.eu'
+	option RegistrarServerPort '5060'
+	option RegistrarServerTransport 'UDP'
+	option RegistrationPeriod '3240'
+	option RegisterExpires '3600'
+	option UserAgentDomain ' '
+	option TimerRegistrationFailed '120'
+	option TimerT1 '500'
+	option VoIPProfile 'VoIPProfile1'
+	option SIPSessionTimerEnable '0'
+	option SIPSessionExpireInterval '1800'
+	option SIPSessionMinimumTimer '90'
+	option SIPSessionRefresher 'NONE'
+	option SIPSessionTimerMode 'REQUEST'
+	option SIPSessionRefreshRequest 'UPDATE'
+	list CodecList '1CodecProfile1'
+	list CodecList '1CodecProfile2'
+	list CodecList '1CodecProfile3'
+	list CodecList '1CodecProfile5'
+	list CodecList '1CodecProfile4'
+
+config CodecProfile '1CodecProfile1'
+	option Enable '1'
+	option Codec 'G.711ALaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile2'
+	option Enable '1'
+	option Codec 'G.711MuLaw'
+	option PacketizationPeriod '20'
+	option SilenceSupression '1'
+
+config CodecProfile '1CodecProfile3'
+	option Enable '1'
+	option Codec 'G.726'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile4'
+	option Enable '1'
+	option Codec 'G.722'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config CodecProfile '1CodecProfile5'
+	option Enable '1'
+	option Codec 'G.729'
+	option PacketizationPeriod '20'
+	option SilenceSupression '0'
+
+config VoIPProfile 'VoIPProfile1'
+	option Enable '1'
+	option DTMFMethod 'RFC4733'
+	option RTP '1RTP'
+
+config RTP '1RTP'
+	option LocalPortMin '10020'
+	option LocalPortMax '10039'
+	option JitterBufferType 'Static'
+
+config FXXPorts 'POTS'
+	option Region 'US'
+
+config FXSPorts 'FXS1'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config FXSPorts 'FXS2'
+	option Enable '1'
+	option DialType 'Tone'
+	option TransmitGain '0'
+	option ReceiveGain '0'
+	option EchoCancellationEnable '1'
+
+config Extension 'Extension1'
+	option Enable '1'
+	option ExtensionNumber '10#'
+	option Provider 'FXS1'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 1'
+
+config Extension 'Extension2'
+	option Enable '1'
+	option ExtensionNumber '11#'
+	option Provider 'FXS2'
+	option CallingFeatures 'Set1'
+	option Name 'Phone 2'
+
+config Line 'Line1'
+	option Enable '1'
+	option Provider 'Client1'
+	option CallingFeatures 'Set1'
+
+config Line 'Line2'
+	option Enable '1'
+	option Provider 'Client2'
+	option CallingFeatures 'Set2'
+
+config IncomingMap 'IncomingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config IncomingMap 'IncomingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config IncomingMap 'IncomingMap3'
+	option Enable '0'
+	option Extension 'Extension2'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap1'
+	option Enable '1'
+	option Extension 'Extension1'
+	option Line 'Line1'
+
+config OutgoingMap 'OutgoingMap2'
+	option Enable '1'
+	option Extension 'Extension2'
+	option Line 'Line2'
+
+config CallingFeatures 'Set1'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '0'
+
+config CallingFeatures 'Set2'
+	option CallerIDEnable '1'
+	option CallerIDNameEnable '1'
+	option CallForwardUnconditionalEnable '0'
+	option CallForwardUnconditionalNumber ' '
+	option CallForwardOnBusyEnable '0'
+	option CallForwardOnBusyNumber ' '
+	option CallForwardOnNoAnswerEnable '0'
+	option CallForwardOnNoAnswerRingTimeout '24'
+	option CallForwardOnNoAnswerNumber ' '
+	option CallTransferEnable '1'
+	option MWIEnable '1'
+	option VMWIEnable '1'
+	option LineMessagesWaiting '0'
+	option AnonymousCallRejectionEnable '0'
+	option AnonymousCallEnable '1'
+	option DoNotDisturbEnable '1'
+	option RepeatDialEnable '1'
+	option VoiceMailEnable '1'
+	option CallPickUpEnable '1'
+	option CCBSEnable '1'
+	option CallWaitingEnable '1'
+
+config NumberingPlan 'NumberingPlan1'
+	option MinimumNumberOfDigits '1'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+
+config NumberingPlan 'NumberingPlan2'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit ' '
+	list PrefixList '2PrefixInfo1'
+	list PrefixList '2PrefixInfo2'
+	list PrefixList '2PrefixInfo3'
+	list PrefixList '2PrefixInfo4'
+	list PrefixList '2PrefixInfo5'
+	list PrefixList '2PrefixInfo6'
+	list PrefixList '2PrefixInfo7'
+	list PrefixList '2PrefixInfo8'
+	list PrefixList '2PrefixInfo9'
+
+config NumberingPlan 'NumberingPlan3'
+	option MinimumNumberOfDigits '5'
+	option MaximumNumberOfDigits '15'
+	option InterDigitTimerStd '2000'
+	option InterDigitTimerOpen '2000'
+	option TerminationDigit '#'
+	list PrefixList '3PrefixInfo1'
+
+config PrefixInfo '2PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '*43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo2'
+	option Enable '1'
+	option PrefixRange '#43#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CW_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo3'
+	option Enable '1'
+	option PrefixRange '*21*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo4'
+	option Enable '1'
+	option PrefixRange '#21#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFU_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo5'
+	option Enable '1'
+	option PrefixRange '*67*(X+)#'
+	option PrefixMinNumberOfDigits '9'
+	option PrefixMaxNumberOfDigits '9'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo6'
+	option Enable '1'
+	option PrefixRange '#67#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFB_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo7'
+	option Enable '1'
+	option PrefixRange '*61*(X+(*X+)?)#'
+	option PrefixMinNumberOfDigits '15'
+	option PrefixMaxNumberOfDigits '15'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo8'
+	option Enable '1'
+	option PrefixRange '#61#'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CFNR_DEACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '2PrefixInfo9'
+	option Enable '1'
+	option PrefixRange '*31*'
+	option PrefixMinNumberOfDigits '4'
+	option PrefixMaxNumberOfDigits '4'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'CA_ACTIVATE'
+	option FacilityActionArgument ' '
+
+config PrefixInfo '3PrefixInfo1'
+	option Enable '1'
+	option PrefixRange '110|112'
+	option PrefixMinNumberOfDigits '7'
+	option PrefixMaxNumberOfDigits '7'
+	option NumberOfDigitsToRemove '0'
+	option PosOfDigitsToRemove '0'
+	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
+	option FacilityActionArgument ' '
+
+config DialPlan 'X_IOPSYS_EU_InternalNumber1'
+	option RegExp '1X#'
+

evoice/files/etc/evoice/voicedm

@@ -0,0 +1,181 @@
+# RO (Main)
+config account 'map_board'
+   option HW_Has_Voice 'hw.board.hasVoice'
+   option HW_Has_DECT 'hw.board.hasDect'
+   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
+   option HW_VoiceDSP 'hw.board.VoiceDSP'
+   option ProductID 'device.deviceinfo.ModelName'
+   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
+   option SerialNumber 'device.deviceinfo.SerialNumber'
+   
+config account 'map_pots'
+   option Country 'voice.POTS.Region'
+
+# Voice Service navigation paths
+# Not used to initialize internal configuration
+config navigation 'map_vs'
+   option Account 'voice.Client@.'
+   option Network 'voice.Client@.Network'
+   option VoIPProfile 'voice.Network@.VoIPProfile'
+   option CfAccount 'voice.Line@.CallingFeatures'
+   option CfPhone 'voice.Extension@.CallingFeatures'
+   option CodecList 'voice.Network@.CodecList'
+   option Codec 'voice.Codec@.Codec'
+   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
+   option From_Phone 'voice.OutgoingMap@.Extension'
+   option Extension 'voice.Extension@.Provider'
+   option To_Account 'voice.OutgoingMap@.Line'
+   option Line 'voice.Line@.Provider'
+   option LineEnable 'voice.Line@.Enable'
+   option LineProvider 'voice.Line@.Provider'
+   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
+   option From_Account 'voice.IncomingMap@.Line'
+   option To_Phone 'voice.IncomingMap@.Extension'
+   option ExtensionEnable 'voice.Extension@.Enable'
+   option ExtensionProvider 'voice.Extension@.Provider'
+
+# Registration for account A-Z is associate with SIP.Clienti.Enable    
+# All parameters in this table are written to internal configuration
+config account 'map_account'
+   option Registration 'voice.Client@.Enable'
+   option Display_Name ''
+   option PhoneNumber 'voice.Client@.RegisiterURI'
+   option Username 'voice.Client@.AuthUserName'
+   option Password 'voice.Client@.AuthPassword'
+   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
+   option Device_Description 'voice.Client@.UserAgent'
+
+# Network stuff associated with an account.
+# All parameters in this table are written to internal configuration
+config network 'map_net'
+   option Enable                'voice.Network@.Enable'
+   option Registration_Server   'voice.Network@.RegistrarServer'
+   option Outbound_Proxy        'voice.Network@.ProxyServer'
+   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
+   option SIP_Port              'voice.Network@.RegistrarServerPort'
+   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
+   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
+   option Registration_Interval 'voice.Network@.RegisterExpires'
+   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
+   option T1                    'voice.Network@.TimerT1'
+   option UserAgentDomain       'voice.Network@.UserAgentDomain'
+   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
+   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
+   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
+   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
+   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
+   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
+
+config VoIPProfile 'map_voip'
+   option Enable 'voice.VoIPProfile@.Enable'
+   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
+   option RTP 'voice.VoIPProfile@.RTP'
+
+config RTP 'map_rtp'
+   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
+   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
+
+config codecs 'map_codec'
+   option Codec 'voice.CodecProfile@.Codec'
+   option enable 'voice.CodecProfile@.Enable'
+   option ptime 'voice.CodecProfile@.PacketizationPeriod'
+   option dtx 'voice.CodecProfile@.SilenceSupression'
+
+config fxsinfo 'map_fxs'
+   option Enable 'voice.FXS@.Enable'
+   option DialType 'voice.FXS@.DialType'
+   option TransmitGain 'voice.FXS@.TransmitGain'
+   option ReceiveGain  'voice.FXS@.ReceiveGain'
+   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
+
+config extensioninfo 'map_ext'
+   option Enable 'voice.Extension@.Enable'
+   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
+   option Display_Name_Phone 'voice.Extension@.Name'
+
+config capabilities 'map_capa'
+   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
+   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
+
+config cs_account 'map_set'
+   option BusyCallWait 'voice.Set@.CallWaitingEnable'
+   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
+   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
+   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
+   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
+   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
+   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
+   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
+   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
+   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
+   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
+   option CallerIDEnable 'voice.Set@.CallerIDEnable'
+
+config cs_xvendor 'map_np_cs'
+   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
+   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
+   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
+   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
+   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
+   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
+   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
+   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
+   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
+   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
+   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
+   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
+   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
+   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
+   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
+   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
+   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
+   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
+   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
+   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
+   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
+   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
+   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
+   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
+   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
+   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
+   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
+   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
+
+config cc_xvendor 'map_np_in'
+   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
+
+config cc_xvendor 'map_np_sh'
+   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
+
+config cc_xvendor 'map_np_eme'
+   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
+   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
+
+config cc_xvendor 'map_np_rn'
+   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
+   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
+   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
+
+config cc_xvendor 'map_np_bn'
+   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
+   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
+
+config TR104NumberingPlan 'map_np_tr'
+   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
+   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
+   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
+   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
+   option term_digit 'voice.NumberingPlan@.TerminationDigit'
+   option prefix_list 'voice.NumberingPlan@.PrefixList'
+
+config TR104NumberingPlanPrefix 'map_np_pf'
+   option enable 'voice.@PrefixInfo@.Enable'
+   option range 'voice.@PrefixInfo@.PrefixRange'
+   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
+   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
+   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
+   option facility_act 'voice.@PrefixInfo@.FacilityAction'
+   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
+
+

evoice/files/etc/evoice/voicero

@@ -0,0 +1,56 @@
+config static_prm 'defaults'
+   option Print_Control '4'
+   option Print_UDP_Addr '192.168.1.3'
+   option Print_UDP_Port '60000'
+   option Verbosity 'On'
+   option Failure_Log 'On'
+   option Message_Log 'On'
+   option Method_Trace 'Off'
+   option Dial_Cache_Size '0'
+   option Reverse_Fax_Detection '0'
+   option DSP_24 '0'
+   option DSP_36 '0'
+   option DSP_43 '0'
+   option Swap_Name_Nr_CID '0'
+   option R_Button_Lower_Lim '100'
+   option R_Button_Upper_Lim '800'
+   option HookOn_Delay '0'
+   option SupportLDD '0'
+   option LDD_Min_Break_Time '41'
+   option LDD_Max_Break_Time '94'
+   option LDD_Percent_Break '55'
+   option Tone_On_Hangup '1'
+   option BusyTone_On_Hangup '1'
+   option Enable_Analouge_Conf '0'
+   option PrackUsage '1'
+   option SIP_SupportedPath '0'
+   option IMS_Access_Network_Info ' '
+   option SIP_Reason_Protocol '0'
+   option SIP_Body_QOST '0'
+   option SIP_HistoryInfo '0'
+   option Customer_Spec2 '1'
+   option UTF8_Enable '0'
+   option RFC3325 '0'
+   option Accept_From_Registered '0'
+   option Polarity_Reversal '0'
+   option Closed_Dial_Plan '0'
+   option Netw_Dial '0'
+   option No_Answer_Tmo '180'
+   option UPnP_Enabled '0'
+   option NAT_Address ' '
+   option NAT_Address_From_SIP '0'
+   option HookOn_Transfer '0'
+   option Enable_Call_Transfer '1'
+   option CallerIDEnable '1'
+   option Multiparty_Transp '0'
+   option Presence_Indication '0'
+   option Login_Note ' '
+   option Login_Description ' '
+   option Logout_Note ' '
+   option Logout_Description ' '
+   option Resolve_Every_Transaction '2'
+   option Translate_Plus '1'
+   option Mid_Call_Services '0'
+   option Account_Restriction '0'
+   option Answering_Machine_Enable '0'
+

evoice/files/etc/init.d/evoice

@@ -0,0 +1,32 @@
+#!/bin/sh /etc/rc.common
+
+START=68
+STOP=12
+
+USE_PROCD=1
+NAME=evoice
+VOICE_UCI_CONFIG=voice
+
+start_service() {
+	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
+
+
+	which endptmngr >/dev/null 2>&1 && {
+		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
+		return
+	}
+
+	procd_open_instance
+	procd_set_param command $NAME
+	procd_set_param respawn "5" "0" "3"
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger $VOICE_UCI_CONFIG
+}

evoice/files/lib/voice/codecs_airoha.json

@@ -0,0 +1,50 @@
+{
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "20",
+			"SilenceSuppression": false
+		}
+	]
+}
+

evoice/files/lib/voice/codecs_brcm.json

@@ -0,0 +1,140 @@
+{
+	"G.711MuLaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.711ALaw": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.726": [
+		{
+			"BitRate": 16000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 24000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 32000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 40000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.723.1": [
+		{
+			"BitRate": 5300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.729": [
+		{
+			"BitRate": 8000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"iLBC": [
+		{
+			"BitRate": 15200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 13300,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"G.722": [
+		{
+			"BitRate": 64000,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"AMR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 10200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7950,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 7400,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 6700,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5900,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 5150,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		},
+		{
+			"BitRate": 4750,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-EFR": [
+		{
+			"BitRate": 12200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-FR": [
+		{
+			"BitRate": 13200,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	],
+	"GSM-HR": [
+		{
+			"BitRate": 5600,
+			"PacketizationPeriod": "10-30",
+			"SilenceSuppression": true
+		}
+	]
+}
+

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v2.
+# This is free software, licensed under the GNU General Public License v3.
 # See /LICENSE for more information.
 #
 
@@ -20,6 +20,9 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
+PKG_LICENSE:=GPL-3.0
+PKG_LICENSE_FILES:=LICENSE
+
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

fdtextract/Makefile

@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2021 IOPSYS Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fdtextract
+PKG_RELEASE:=1
+PKG_VERSION:=1.0
+
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_MIRROR_HASH:=skip
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+	CATEGORY:=Utilities
+	TITLE:=fdtextract
+	DEPENDS:= +libfdt
+endef
+
+define Package/$(PKG_NAME)/description
+	Command to extract sub images from FIT images.
+endef
+
+define Package/$(PKG_NAME)/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
+	$(STRIP) $(1)/usr/sbin/fdtextract
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -1,54 +0,0 @@
-#
-# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fping
-PKG_VERSION:=4.0
-PKG_RELEASE:=2
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=http://fping.org/dist/
-PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
-
-PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
-PKG_LICENSE:=BSD-4-Clause
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/fping
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
-  URL:=http://fping.org/
-endef
-
-
-define Package/fping/description
-	fping is a ping like program which uses the Internet Control Message Protocol
-	(ICMP) echo request to determine if a target host is responding.  fping
-	differs from ping in that you can specify any number of targets on the command
-	line, or specify a file containing the lists of targets to ping.  Instead of
-	sending to one target until it times out or replies, fping will send out a
-	ping packet and move on to the next target in a round-robin fashion.
-endef
-
-CONFIGURE_ARGS+= \
-	--enable-ipv4 \
-	--enable-ipv6
-
-TARGET_CFLAGS += -std=gnu99
-
-define Package/fping/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -1,3 +0,0 @@
-
-git-src
-

gigaset-elements/Makefile

@@ -1,65 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=gigaset-elements
-
-PKG_VERSION:=2.4.2
-# PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
-PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
-
-PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
-
-
-PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-include $(INCLUDE_DIR)/package.mk
-
-######################################################
-
-define Package/gigaset-elements
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libjson-c +libcurl +libpthread
-  TITLE:=Gigaset elements
-endef
-
-######################################################
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) all
-endef
-
-
-
-define Package/gigaset-elements/install
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
-	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
-endef
-
-
-
-define Package/gigaset-elements/preinst
-#!/bin/sh
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
-mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
-endef
-
-
-define Package/gigaset-elements/postrm
-#!/bin/sh
-rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
-rm -rf /usr/share/gigaset
-endef
-
-
-######################################################
-
-$(eval $(call BuildPackage,gigaset-elements))
-

gryphon-led-module/Makefile

@@ -0,0 +1,90 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=gryphon-led-kernel-module
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/$(PKG_NAME)
+  SUBMENU:=LED modules
+  TITLE:=LED driver for Gryphon
+  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
+  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
+  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
+  DEPENDS:= +(TARGET_brcmbca):bcmkernel
+  PKG_LICENSE:=GPLv2
+  PKG_LICENSE_URL:=
+endef
+
+define KernelPackage/$(PKG_NAME)/description
+  This package contains the LED driver for Gryphon devices.
+endef
+
+EXTRA_KCONFIG:= CONFIG_RGB_LED=m
+
+MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
+
+
+ifeq ($(CONFIG_TARGET_brcmbca),y)
+	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
+	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
+	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
+	# and abcdef the git-commit.
+	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
+	# The assignment below removes the part after the - which puts modules in the right directory as
+	# long as the bcmlinux version matches the kernel version in the BCM SDK.
+	# So, this will only stop working in the time window where the BCM SDK has been updated
+	# but bcmlinux has not yet been updated.
+	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
+	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
+
+	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
+		# These targets use a 64-bit kernel
+		LINUX_KARCH:=arm64
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
+	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
+		# These targets use a 32-bit arm-sfp kernel
+		LINUX_KARCH:=arm
+		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
+	endif
+	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
+	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
+endif
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
+	$(CP) src/* $(PKG_BUILD_DIR)
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		CROSS_COMPILE="$(TARGET_CROSS)" \
+		ARCH="$(LINUX_KARCH)" \
+		SUBDIRS="$(PKG_BUILD_DIR)" \
+		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
+		modules
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+endef
+
+$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -0,0 +1,26 @@
+# Copyright (c) 2017 Genexis B.V.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+MODULE_NAME  = gryphon-led-kernel-module
+
+obj-m  := $(MODULE_NAME).o
+
+GENEXIS_FILES= \
+	main.o \
+	sk9822.o \
+	sk9822_bitbang.o
+
+$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -0,0 +1,334 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#define DEBUG 1
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/version.h>
+
+#include "sk9822.h"
+
+#define DRIVER_NAME			"canyon_led"
+#define DRIVER_AUTHOR		"Genexis B.V."
+#define DRIVER_DESC			"Canyon LED driver for SK9822"
+#define DRIVER_VERSION	"1"
+
+/**
+ * sysfs interfaces
+ */
+
+static ssize_t get_led_color(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set complete LED strip to a specific color
+ * @retval count number of bytes written
+ * @retval -EMSGSIZE if the message is too big
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_color(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	size_t buflen = count;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	/* strip newline */
+	if ((count > 0) && (buf[count-1] == '\n')) {
+		buflen--;
+	}
+
+	if (buflen != 6) { // RRGGBB\0
+		return -EMSGSIZE;
+	}
+
+	// Update the LED array here
+	ret = sk9822_set_color_str(sk9822, buf);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set led color\n");
+		return -EIO;
+	}
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
+
+static ssize_t get_led_brightness(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	int len;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
+	if (len <= 0) {
+		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
+		return -EIO;
+	}
+
+	return len;
+}
+
+/**
+ * @brief Set LED brightness
+ * @retval count number of bytes written
+ * @retval -EINVAL if the message is not a valid hexadecimal number
+ * @retval -EIO for all other errors (e.g. leds cannot be configured)
+ */
+static ssize_t set_led_brightness(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	int ret = 0;
+	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
+	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
+
+	if (IS_ERR(sk9822)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -EIO;
+	}
+
+	if (kstrtoul(buf, 16, &val)) {
+		return -EINVAL;
+	}
+
+	if(val > SK9822_DEFAULT_BRIGHTNESS) {
+		val = SK9822_DEFAULT_BRIGHTNESS;
+	}
+
+	sk9822->led_brightness = (uint8_t)val;
+
+	// Now push to the HW
+	ret = sk9822_update(sk9822);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to update led\n");
+		return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
+
+
+static struct attribute *sk9822_dev_attrs[] = {
+	 &dev_attr_led_color.attr,
+	 &dev_attr_led_brightness.attr,
+	 NULL
+};
+
+static struct attribute_group sk9822_dev_attr_group = {
+	.name = "sk9822",
+	.attrs = sk9822_dev_attrs,
+};
+
+/**
+ * device prope and removal
+ */
+
+static int canyon_led_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct sk9822_leds *leds;
+
+	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
+	if (!leds) {
+		return -ENOMEM;
+	}
+	leds->dev = &pdev->dev;
+	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
+
+	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
+	if (ret < 0) {
+		dev_warn(&pdev->dev, "Could not read led-count property\n");
+		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
+	} else {
+		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
+	}
+
+	leds->led_colors = devm_kzalloc(&pdev->dev,
+			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
+	if (!leds->led_colors) {
+		return -ENOMEM;
+	}
+
+
+	platform_set_drvdata(pdev, leds);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	}
+
+	gpiod_direction_output(leds->clock_gpio, 1);
+	if (IS_ERR(leds->clock_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
+				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
+		return PTR_ERR(leds->clock_gpio);
+	} else {
+		printk(KERN_INFO "Got clock gpio\n");
+		gpiod_set_value(leds->clock_gpio, 0);
+	}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
+	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
+#else
+	dev_warn(&pdev->dev, "Kernel version Not supported\n");
+	exit(1);
+#endif
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	}
+
+	gpiod_direction_output(leds->data_gpio, 1);
+	if (IS_ERR(leds->data_gpio)) {
+		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
+				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
+		return PTR_ERR(leds->data_gpio);
+	} else {
+		printk(KERN_INFO "Got data gpio\n");
+		gpiod_set_value(leds->data_gpio, 0);
+	}
+
+	printk(KERN_INFO "Attempt to set filefs stuff\n");
+	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+	if (ret) {
+		dev_err(&pdev->dev, "sysfs creation failed\n");
+		return ret;
+	}
+
+#if 0
+	printk(KERN_INFO "Flash LEDs to verify they work\n");
+	sk9822_set_color_str(leds, "00FF00");
+	sk9822_update(leds);
+	msleep(200);
+	sk9822_set_color_str(leds, "000000");
+	sk9822_update(leds);
+#endif
+
+	printk(KERN_INFO "canyon led successfully probed\n");
+
+	return 0;
+}
+
+static int canyon_led_remove(struct platform_device *pdev)
+{
+	struct sk9822_leds *leds;
+
+	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
+
+	leds = platform_get_drvdata(pdev);
+	if (IS_ERR(leds)) {
+		printk(KERN_ERR "Platform get drvdata returned NULL\n");
+		return -1;
+	}
+
+	if (leds->clock_gpio) {
+		gpiod_put(leds->clock_gpio);
+	}
+
+	if (leds->data_gpio) {
+		gpiod_put(leds->data_gpio);
+	}
+
+	printk(KERN_NOTICE "Bye, bye\n");
+
+	return 0;
+}
+
+/**
+ * platform driver metadata
+ */
+
+static const struct of_device_id canyon_led_of_ids[] = {
+	{ .compatible = "canyon,led" },
+	{ }
+};
+
+static struct platform_driver canyon_led = {
+	.probe = &canyon_led_probe,
+	.remove = &canyon_led_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = canyon_led_of_ids,
+	},
+};
+
+MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
+module_platform_driver(canyon_led);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+#include "sk9822_bitbang.h"
+
+cRGB __hexs_to_rgb(const char *hex)
+{
+	cRGB rgb;
+	int r, g, b;
+
+	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
+	// This needs sanity checking
+	rgb.r = r;
+	rgb.g = g;
+	rgb.b = b;
+	return rgb;
+}
+
+/**
+ * @brief update the color over the given device struct to the provided HEX color
+ */
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
+{
+	int i;
+	cRGB color = __hexs_to_rgb(hex);
+
+	for (i = 0; i < sk9822->led_count; i++) {
+		sk9822->led_colors[i] = color;
+	}
+
+	return 0;
+}
+
+/**
+ * @brief write device struct to the device
+ */
+int sk9822_update(struct sk9822_leds *sk9822)
+{
+	uint16_t i;
+	uint16_t led_count = sk9822->led_count;
+
+	// Start Frame
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+	sk9822_bb_write(sk9822, 0x00);
+
+	for (i = 0; i < led_count; i++) {
+		cRGB *p = &sk9822->led_colors[i];
+		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
+		sk9822_bb_write(sk9822, p->b);
+		sk9822_bb_write(sk9822, p->g);
+		sk9822_bb_write(sk9822, p->r);
+	}
+
+	// End frame
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+	sk9822_bb_write(sk9822, 0xff);
+
+	return 0;
+}

gryphon-led-module/src/sk9822.h

@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef SK9822_H_
+#define SK9822_H_
+
+#include <linux/types.h>
+
+#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
+#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
+
+typedef struct {
+	uint8_t b;
+	uint8_t g;
+	uint8_t r;
+} cRGB;   // BGR (SK9822 Standard)
+
+struct sk9822_leds {
+	struct device *dev;
+	struct gpio_desc *clock_gpio;
+	struct gpio_desc *data_gpio;
+
+	cRGB *led_colors;
+	uint8_t led_brightness;
+	uint16_t led_count;
+};
+
+int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
+int sk9822_update(struct sk9822_leds *sk9822);
+
+#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+/**
+ * @brief Bitbang write operation CLOCK+DATA
+ *
+ * Assumed state before call: CLOCK- Low, DATA- High
+ */
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
+{
+	uint8_t i;
+
+	for (i = 0; i < 8 ; i++) {
+		if (!(c&0x80)) {
+			gpiod_set_value(sk9822->data_gpio, 0); // set data low
+		} else {
+			gpiod_set_value(sk9822->data_gpio, 1); // set data high
+		}
+
+		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
+		c <<= 1;
+		udelay(1); // stretch clock
+		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
+	}
+
+	// State after call: SCK Low, Data high
+}

gryphon-led-module/src/sk9822_bitbang.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2017 Genexis B.V.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef _SK9822_BB_H_
+#define _SK9822_BB_H_
+
+#include <linux/types.h>
+
+#include "sk9822.h"
+
+void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
+
+#endif /* _SK9822_BB_H_ */

ice-client/Config.in

@@ -1,4 +0,0 @@
-
-config ICE_OPEN
-       bool "Use pre-compiled version for Open SDK"
-       default n

ice-client/files/ice-client.uci_default

@@ -1,67 +0,0 @@
-#!/bin/sh
-
-grep -rq "^ice:" /etc/passwd || {
-	adduser -D -H -s /bin/false ice
-}
-
-uci -q delete passwords.ice
-uci -q set passwords.ice=usertype
-uci -q set passwords.ice.password="\$WPAKEY"
-uci -q add_list passwords.ice._access_r=root
-uci -q commit passwords
-
-uci show rpcd | grep username=.*ice.* >/dev/null || {
-cat >> /etc/config/rpcd << EOF
-
-config login
-	option username 'ice'
-	option password '\$p\$ice'
-	list _access_r 'none'
-	list write 'user-user'
-	list write 'juci-broadcom-dsl'
-	list write 'juci-broadcom-dsl-admin'
-	list write 'juci-broadcom-ethernet'
-	list write 'juci-broadcom-iptv'
-	list write 'juci-broadcom-vlan'
-	list write 'juci-broadcom-vlan-admin'
-	list write 'juci-wireless'
-	list write 'juci-wireless-admin'
-	list write 'juci-catv'
-	list write 'juci-ddns'
-	list write 'juci-diagnostics'
-	list write 'juci-dnsmasq-dhcp'
-	list write 'juci-dropbear'
-	list write 'juci-ethernet'
-	list write 'juci-event'
-	list write 'juci-firewall-fw3'
-	list write 'juci-iconnect'
-	list write 'juci-igmpinfo'
-	list write 'juci-inteno-backup'
-	list write 'juci-inteno-multiwan'
-	list write 'juci-inteno-provisioning'
-	list write 'juci-inteno-qos'
-	list write 'juci-inteno-voice-client'
-	list write 'juci-minidlna'
-	list write 'juci-mod-status'
-	list write 'juci-mod-system'
-	list write 'juci-natalie-dect'
-	list write 'juci-netmode'
-	list write 'juci-network-netifd'
-	list write 'juci-owsd'
-	list write 'juci-printer'
-	list write 'juci-realtime-graphs'
-	list write 'juci-samba'
-	list write 'juci-sfp'
-	list write 'juci-snmpd'
-	list write 'juci-sysupgrade'
-	list write 'juci-uhttpd'
-	list write 'juci-upnp'
-	list write 'juci-usb'
-	list write 'core'
-	list write 'unauthenticated'
-
-EOF
-}
-
-exit 0
-

icgroupd/Makefile

@@ -1,46 +0,0 @@
-#
-# Copyright (C) 2016 Inteno Broadband AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=icgroupd
-PKG_VERSION:=1.0
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPL-2.0
-PKG_LICENSE_FILES:=
-
-PKG_MAINTAINER:=Inteno Broadband AB
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/icgroupd
-  SECTION:=base
-  CATEGORY:=Base system
-  TITLE:=Inteno cgroup daemon
-  DEPENDS:=+uci +busybox
-endef
-
-define Package/icgroupd/description
-	This package contains Intenos cgroup daemon and associated
-	configuration and startup scripts.
-endef
-
-define Build/Compile
-	true
-endef
-
-define Package/icgroupd/install
-	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
-
-	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
-	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
-	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,icgroupd))
-

icgroupd/files/cgroupd

@@ -1,76 +0,0 @@
-#!/bin/sh
-
-CGBASEDIR=$1
-CGCONFIG=$2
-[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
-
-[ -r /lib/functions.sh ] || exit 1
-. /lib/functions.sh
-
-CGPROCMAP=/tmp/cgprocmap
-CGPERIOD=3s
-
-DBGLOG=/tmp/cgroupd.log
-DEBUG=0
-
-
-add_to_procmap () {
-	local name_grp=$1
-	local name grp
-
-	name=$(echo $name_grp |awk -F= '{print $1}')
-	grp=$(echo $name_grp |awk -F= '{print $2}')
-
-	echo "($name) $grp" >> $CGPROCMAP
-}
-
-# Read configuration file and create process:group look-up table
-# in /tmp file
-read_config () {
-	local enab
-
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && exit 1
-
-	config_get CGDEFGROUP cgroups defgroup "_undef_"
-	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
-	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
-
-	echo -n '' > $CGPROCMAP
-	config_list_foreach procmap procmap add_to_procmap
-	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
-}
-
-# Move all process except init from cgroup root to cgroups according
-# to /tmp look-up table
-move_wild_procs () {
-	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
-	local pid name grp
-
-	for pid in $wild_procs; do
-
-		[ $pid -eq 1 ] && continue
-		if [ -d /proc/$pid ]; then
-
-			name=$(awk '{print $2}' /proc/$pid/stat)
-			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
-
-			[ "$grp" == "." ] && continue
-			[ -n "$grp" ] || grp=$CGDEFGROUP
-
-			[ "$DEBUG" == "1" ] && \
-			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
-			echo $pid > $CGBASEDIR/$grp/cgroup.procs
-		fi
-	done
-}
-
-
-[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-read_config
-while true; do
-	move_wild_procs
-	sleep $CGPERIOD
-done

icgroupd/files/cgroups.config

@@ -1,48 +0,0 @@
-config cgroups cgroups
-	option enabled 1
-	option defgroup iopsys/normal
-
-config cgroup _root_
-#	list option cpu.rt_runtime_us=50000
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=40000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup iopsys_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=30000
-	list option memory.limit_in_bytes=-1
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=10000
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_normal
-	list option cpu.shares=1024
-#	list option cpu.rt_runtime_us=2500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config cgroup 3prt_high
-	list option cpu.shares=4096
-#	list option cpu.rt_runtime_us=7500
-	list option memory.limit_in_bytes=75M
-	list option memory.move_charge_at_immigrate=1
-
-config procmap procmap
-	list procmap kthreadd=.
-	list procmap minidlna=3prt/normal
-

icgroupd/files/cgroups.init

@@ -1,93 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=01
-USE_PROCD=1
-PROCD_DEBUG=1
-NAME=cgroupd
-
-CGBASEDIR=/sys/fs/cgroup
-CGCONFIG="cgroups"
-
-DBGLOG=/tmp/cginit.log
-DEBUG=0
-
-
-cgroupinit_set_knob_value () {
-	local knob_val=$1
-	local dir=$2
-	local knob val
-
-	knob=$(echo $knob_val |awk -F= '{print $1}')
-	val=$(echo $knob_val |awk -F= '{print $2}')
-	/bin/echo $val > $CGBASEDIR/$dir/$knob
-	[ "$DEBUG" == "1" ] && \
-	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
-}
-
-cgroupinit_create_group () {
-	local cgrp=$1
-	local dir
-
-	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
-	if [ "$cgrp" == "_root_" ]; then
-		dir=.
-	else
-		dir=$(echo $cgrp |tr '_' '/')
-
-		if [ ! -d $CGBASEDIR/$dir ]; then
-			mkdir $CGBASEDIR/$dir
-			[ "$DEBUG" == "1" ] && \
-			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
-		fi
-	fi
-
-	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
-}
-
-cgroupinit_configure_cgroups () {
-	local enab defgrp
-
-	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
-	config_load $CGCONFIG
-
-	config_get enab cgroups enabled "1"
-	[ $enab -eq 0 ] && return 1
-
-	config_get defgrp cgroups defgroup "_undef_"
-	[ "$defgrp" == "_undef_" ] && return 1
-
-	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
-		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
-		[ $? -eq 0 ] || return 1
-	fi
-
-	config_foreach cgroupinit_create_group cgroup
-	return 0
-}
-
-start_service () {
-	cgroupinit_configure_cgroups
-	[ $? -eq 0 ] || return
-
-	procd_open_instance
-	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service () {
-	local cgdir procs prc
-
-	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
-		procs=$(cat $cgdir/cgroup.procs)
-		for prc in $procs; do
-			echo $prc > $CGBASEDIR/cgroup.procs
-		done
-		rmdir $cgdir
-	done
-}
-
-service_triggers() {
-        procd_add_reload_trigger $CGCONFIG
-}
-

icwmp/Config_cwmp.in

@@ -1,35 +0,0 @@
-if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
-
-config CWMP_SCRIPTS_FULL
-	bool "Install all icwmp scripts"
-	default y
-
-choice
-	prompt "Select ACS sever"
-	default CWMP_ACS_MULTI
-
-config CWMP_ACS_MULTI
-	bool "No specific ACS, follow standard"
-
-config CWMP_ACS_HDM
-	bool "HDM"
-endchoice
-
-config CWMP_DEBUG
-	bool "Compile with debug options"
-	default y
-
-config XMPP_ENABLE
-	bool "enable xmpp feature"
-	default n
-
-config CWMP_DEVEL_DEBUG
-	bool "Compile with development debug options"
-	default n
-
-config LIBDATAMODEL_VENDOR_PREFIX
-    string "Vendor Prefix"
-    default "X_Inteno_SE_"
-    
-endif
-