obuspa: use hotplug instead of procd interface trigger

ated/Makefile

@@ -0,0 +1,77 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,35 +1,19 @@
-config BBF_VENDOR_EXTENSION
-	bool "Enable Vendor Extension"
+if PACKAGE_libbbfdm
+
+config LIBBBFDM_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_IOPSYS_EU_"
+
+config BBF_TR181
+	bool "Compile with tr181 device features"
 	default y
 
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
 config BBF_TR104
-	bool "Enable TR-104 Data Model Support"
+	bool "Compile with tr104 voice features"
 	default y
 
 config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
+	bool "Compile with tr143 diagnostics features"
 	default y
 
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBFDM_ENABLE_JSON_PLUGIN
-	bool "Enable json plugin to extend datamodel"
-	default y
-
-config BBFDM_ENABLE_DOTSO_PLUGIN
-	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255
+endif

bbf/Makefile

@@ -1,82 +1,38 @@
 #
-# Copyright (C) 2022 IOPSYS
+# Copyright (C) 2019 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.49
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=3.2.7
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=87ae46df8b4e221b8894fd861d2eb785ae1f3bf3
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=ae196c54590dc343db14a70879f21ef88203c426
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api \
-	    +BBF_TR471:obudpst
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for libbbfdm API
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (internal)
-  VARIANT:=internal
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  CONFLICTS := libbbfdm-mbedtls
-  VARIANT:=openssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
-  VARIANT:=wolfssl
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libmbedtls
 endef
 
 define Package/libbbfdm/config
@@ -98,116 +54,66 @@ define Build/Prepare
 endef
 endif
 
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBBBFDM_VENDOR_PREFIX)\\\"
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
+CONFIGURE_ARGS += \
+	--enable-tr104
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
+CONFIGURE_ARGS += \
+	--enable-tr143
 endif
 
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
 endif
 
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
+ifeq ($(CONFIG_PACKAGE_libmbedtls),y)
+CONFIGURE_ARGS += \
+	--enable-libmbedtls
 endif
 
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
-define Package/libbbfdm/default/install
+define Package/libbbfdm/install
 	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
 	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm
+	$(INSTALL_DIR) $(1)/etc/bbfdm/json
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
 endef
 
-define Package/libbbfdm/default/prerm
+define Package/libbbfdm/prerm
 	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
+	rm -rf /etc/bbfdm/*
 	exit 0
 endef
 
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
 define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
 	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
 endef
 
-$(eval $(call BuildPackage,userinterface))
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -1,117 +0,0 @@
-{
-	"Device.UserInterface.": {
-		"type": "object",
-		"version": "2.0",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Device.UserInterface.RemoteAccess.": {
-			"type": "object",
-			"version": "2.0",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": false,
-			"array": false,
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "enable"
-							}
-						}
-					}
-				]
-			},
-			"Port": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"range": [
-					{
-						"max": 65535
-					}
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "port"
-							}
-						}
-					}
-				]
-			},
-			"SupportedProtocols": {
-				"type": "string",
-				"read": true,
-				"write": false,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"list": {
-					"datatype": "string",
-					"enumerations": [
-						"HTTP",
-						"HTTPS"
-					]
-				},
-				"default": "HTTP"
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "protocol"
-							}
-						}
-					}
-				]
-			}
-		}
-	}
-}

bbf/files/etc/config/userinterface

@@ -1,6 +0,0 @@
-config userinterface 'remote_access'
-	option enable '0'
-	option interface 'wan'
-	option port '80'
-	option protocol 'HTTP'
-

bbf/files/etc/firewall.userinterface

@@ -1,85 +0,0 @@
-#!/bin/sh
-
-
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-configure_firewall_rule() {
-	local enable port protocol gui_port
-	local zone interface
-
-	config_load userinterface
-	config_get_bool enable remote_access enable 1
-	config_get port remote_access port
-	config_get interface remote_access interface
-
-	if [ "${enable}" -eq "0" ] || [ -z "${port}" ] || [ -z "${interface}" ]; then
-		return 0;
-	fi
-
-	zone="zone_${interface}_input"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-
-	zone="zone_${interface}_output"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-}
-
-delete_firewall_rule() {
-	local zone interface
-	local CMD
-
-	config_load userinterface
-	config_get interface remote_access interface
-
-	# Clean remote interface rules
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	zone="zone_${interface}_input"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-
-	zone="zone_${interface}_output"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-}
-
-# Delete existing remote access rules
-delete_firewall_rule
-
-# Configure the User Interface rule
-configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	procd_open_instance usp
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	# Inject firewall rules
-	if [ "${enable}" -eq "1" ]; then
-		/etc/firewall.userinterface
-	fi
-
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface"
-}

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbf/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bulkdata/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2022 iopsys Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,23 +8,10 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.10
+PKG_VERSION:=1.0.0
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)
@@ -32,25 +19,26 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	BBF BulkData Collection
+endef
+
+define Build/Prepare
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
+	-D_GNU_SOURCE
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 
-$(eval $(call BuildPackage,$(PKG_NAME)))
+$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,43 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
 	option log_level '3'
 
+config profile
+	option profile_id '1'
+	option enable '0'
+	option name ''
+	option nbre_of_retained_failed_reports '0'
+	option protocol 'http'
+	option encoding_type ''
+	option reporting_interval '86400'
+	option time_reference '0'
+	option csv_encoding_field_separator ','
+	option csv_encoding_row_separator '
'
+	option csv_encoding_escape_character '"'
+	option csv_encoding_report_format 'column'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_format 'objecthierarchy'
+	option json_encoding_report_time_stamp 'unix'
+	option http_url ''
+	option http_username ''
+	option http_password ''
+	option http_compression 'none'
+	option http_method 'post'
+	option http_use_date_header '1'
+	option http_retry_enable '0'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+	option http_persist_across_reboot '0'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+

bulkdata/files/etc/init.d/bulkdatad

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+# Bulkdata Software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
 START=99
 STOP=10
@@ -7,17 +10,17 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	procd_open_instance bulkdata
-	[ "$enable" -eq "1" ] && {
+	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
+	if [ "$bulkdata_enable" = "1" ]; then
+		procd_open_instance
 		procd_set_param command "$PROG"
 		procd_set_param respawn "3" "7" "0"
-	}
-	procd_close_instance
+		procd_close_instance
+	fi
+}
+
+boot() {
+	start
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

bulkdata/src/Makefile

@@ -0,0 +1,23 @@
+PROG = bulkdatad
+LIB = libbulkdata.so
+
+PROG_OBJS = bulkdata.o common.o config.o http.o log.o report.o times.o buci.o
+LIB_OBJS = datamodel.o
+
+PROG_CFLAGS = $(CFLAGS) -Wall -Werror -fPIC
+PROG_LDFLAGS = $(LDFLAGS) -lubus -luci -lubox -ljson-c -lcurl -lblobmsg_json -lbbfdm -lbbf_api
+LIB_LDFLAGS = $(LDFLAGS) -lbbf_api
+
+%.o: %.c
+	$(CC) $(PROG_CFLAGS) $(FPIC) -c -o $@ $<
+
+all: $(PROG) $(LIB)
+
+$(PROG): $(PROG_OBJS)
+	$(CC) $(PROG_CFLAGS) -o $@ $^ $(PROG_LDFLAGS)
+
+$(LIB): $(LIB_OBJS)
+	$(CC) $(PROG_CFLAGS) $(LIB_LDFLAGS) -shared -o $@ $^
+
+clean:
+	rm -f *.o $(PROG) $(LIB)

bulkdata/src/buci.c

@@ -0,0 +1,265 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#include <strings.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <unistd.h>
+#include <ctype.h>
+
+#include "buci.h"
+
+struct uci_context *uci_ctx = NULL;
+
+int buci_init(void)
+{
+	uci_ctx = uci_alloc_context();
+	if (!uci_ctx) {
+		return -1;
+	}
+	return 0;
+}
+
+int buci_fini(void)
+{
+	if (uci_ctx) {
+		uci_free_context(uci_ctx);
+	}
+
+	return 0;
+}
+
+static bool buci_validate_section(const char *str)
+{
+	if (!*str)
+		return false;
+
+	for (; *str; str++) {
+		unsigned char c = *str;
+
+		if (isalnum(c) || c == '_')
+			continue;
+
+		return false;
+	}
+	return true;
+}
+
+static int buci_init_ptr(struct uci_context *ctx, struct uci_ptr *ptr, char *package, char *section, char *option, char *value)
+{
+	memset(ptr, 0, sizeof(struct uci_ptr));
+
+	/* value */
+	if (value) {
+		ptr->value = value;
+	}
+	ptr->package = package;
+	if (!ptr->package)
+		goto error;
+
+	ptr->section = section;
+	if (!ptr->section) {
+		ptr->target = UCI_TYPE_PACKAGE;
+		goto lastval;
+	}
+
+	ptr->option = option;
+	if (!ptr->option) {
+		ptr->target = UCI_TYPE_SECTION;
+		goto lastval;
+	} else {
+		ptr->target = UCI_TYPE_OPTION;
+	}
+
+lastval:
+	if (ptr->section && !buci_validate_section(ptr->section))
+		ptr->flags |= UCI_LOOKUP_EXTENDED;
+
+	return 0;
+
+error:
+	return -1;
+}
+
+struct uci_section *buci_walk_section(char *package, char *section_type, struct uci_section *prev_section)
+{
+	struct uci_ptr ptr;
+	struct uci_element *e;
+	struct uci_section *next_section;
+
+	if (section_type == NULL) {
+		if (prev_section) {
+			e = &prev_section->e;
+			if (e->list.next == &prev_section->package->sections)
+				return NULL;
+			e = container_of(e->list.next, struct uci_element, list);
+			next_section = uci_to_section(e);
+			return next_section;
+		}
+		else {
+			if (buci_init_ptr(uci_ctx, &ptr, package, NULL, NULL, NULL)) {
+				return NULL;
+			}
+			if (uci_lookup_ptr(uci_ctx, &ptr, NULL, true) != UCI_OK) {
+				return NULL;
+			}
+			if (ptr.p->sections.next == &ptr.p->sections)
+				return NULL;
+			e = container_of(ptr.p->sections.next, struct uci_element, list);
+			next_section = uci_to_section(e);
+
+			return next_section;
+		}
+	}
+	else {
+		struct uci_list *ul, *shead = NULL;
+
+		if (prev_section) {
+			ul = &prev_section->e.list;
+			shead = &prev_section->package->sections;
+		}
+		else {
+			if (buci_init_ptr(uci_ctx, &ptr, package, NULL, NULL, NULL)) {
+				return NULL;
+			}
+			if (uci_lookup_ptr(uci_ctx, &ptr, NULL, true) != UCI_OK) {
+				return NULL;
+			}
+			ul = &ptr.p->sections;
+			shead = &ptr.p->sections;
+		}
+		while (ul->next != shead) {
+			e = container_of(ul->next, struct uci_element, list);
+			next_section = uci_to_section(e);
+			if (strcmp(next_section->type, section_type) == 0)
+				return next_section;
+			ul = ul->next;
+		}
+		return NULL;
+	}
+	return NULL;
+}
+
+void buci_print_list(struct uci_list *uh, char **val, char *delimiter)
+{
+	struct uci_element *e;
+	static char buffer[512];
+	char *buf = buffer;
+	*buf = '\0';
+
+	uci_foreach_element(uh, e) {
+		if (*buf) {
+			strcat(buf, delimiter);
+			strcat(buf, e->name);
+		}
+		else {
+			strcpy(buf, e->name);
+		}
+	}
+	*val = buf;
+}
+
+struct uci_element *buci_lookup_list(struct uci_list *list, const char *name)
+{
+	struct uci_element *e;
+
+	uci_foreach_element(list, e) {
+		if (!strcmp(e->name, name))
+			return e;
+	}
+	return NULL;
+}
+
+int uci_lookup_ptr_bysection(struct uci_context *ctx, struct uci_ptr *ptr, struct uci_section *section, char *option, char *value)
+{
+	struct uci_element *e;
+	memset(ptr, 0, sizeof(struct uci_ptr));
+
+	ptr->package = section->package->e.name;
+	ptr->section = section->e.name;
+	ptr->option = option;
+	ptr->value = value;
+	ptr->flags |= UCI_LOOKUP_DONE;
+
+	ptr->p = section->package;
+	ptr->s = section;
+
+	if (ptr->option) {
+		e = buci_lookup_list(&ptr->s->options, ptr->option);
+		if (!e)
+			return UCI_OK;
+		ptr->o = uci_to_option(e);
+		ptr->last = e;
+		ptr->target = UCI_TYPE_OPTION;
+	}
+	else {
+		ptr->last = &ptr->s->e;
+		ptr->target = UCI_TYPE_SECTION;
+	}
+
+	ptr->flags |= UCI_LOOKUP_COMPLETE;
+
+	return UCI_OK;
+}
+
+char *buci_get_value_bysection(struct uci_section *section, char *option)
+{
+	struct uci_ptr ptr;
+	char *val = "";
+
+	if (uci_lookup_ptr_bysection(uci_ctx, &ptr, section, option, NULL) != UCI_OK) {
+		return val;
+	}
+
+	if (!ptr.o)
+		return val;
+
+	if(ptr.o->type == UCI_TYPE_LIST) {
+		buci_print_list(&ptr.o->v.list, &val, " ");
+		return val;
+	}
+
+	if (ptr.o->v.string)
+		return ptr.o->v.string;
+	else
+		return val;
+}
+
+char *buci_get_value(char *package, char *section, char *option)
+{
+	struct uci_ptr ptr;
+	char *val = "";
+
+	if (!section || !option)
+		return val;
+
+	if (buci_init_ptr(uci_ctx, &ptr, package, section, option, NULL)) {
+		return val;
+	}
+	if (uci_lookup_ptr(uci_ctx, &ptr, NULL, true) != UCI_OK) {
+		return val;
+	}
+
+	if (!ptr.o)
+		return val;
+
+	if(ptr.o->type == UCI_TYPE_LIST) {
+		buci_print_list(&ptr.o->v.list, &val, " ");
+		return val;
+	}
+
+	if (ptr.o->v.string)
+		return ptr.o->v.string;
+	else
+		return val;
+}

bulkdata/src/buci.h

@@ -0,0 +1,31 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __BUCI_H
+#define __BUCI_H
+
+#include <uci.h>
+
+int buci_init(void);
+int buci_fini(void);
+struct uci_section *buci_walk_section(char *package, char *section_type, struct uci_section *prev_section);
+void buci_print_list(struct uci_list *uh, char **val, char *delimiter);
+struct uci_element *buci_lookup_list(struct uci_list *list, const char *name);
+int uci_lookup_ptr_bysection(struct uci_context *ctx, struct uci_ptr *ptr, struct uci_section *section, char *option, char *value);
+char *buci_get_value_bysection(struct uci_section *section, char *option);
+char *buci_get_value(char *package, char *section, char *option);
+
+#define buci_foreach_section(package, section_type, section) \
+	for (section = buci_walk_section(package, section_type, NULL); \
+		section != NULL; \
+		section = buci_walk_section(package, section_type, section))
+
+#endif //__BUCI_H

bulkdata/src/bulkdata.c

@@ -0,0 +1,144 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*				Omar Kallel <omar.kallel@pivasoftware.com>
+*/
+
+#include <stdio.h>
+#include <string.h>
+#include <libubox/uloop.h>
+
+#include "http.h"
+#include "config.h"
+#include "log.h"
+#include "common.h"
+#include "report.h"
+#include "times.h"
+#include "bulkdata.h"
+
+struct bulkdata bulkdata_main = {0};
+int profiles_number = 0;
+
+void bulkdata_profile_cb(struct uloop_timeout *timeout);
+
+int get_retry_period(int min)
+{
+        srand(time(NULL));
+        return rand()%min + min;
+}
+
+static void bulkdata_run_profiles(struct bulkdata *bulkdata)
+{
+	unsigned int next_period;
+	int i = 0;
+
+	for (i = 0; i < profiles_number; i++) {
+		bulkdata->profile[i].utimer.cb = bulkdata_profile_cb;
+		LIST_HEAD(failedreports);
+		bulkdata->profile[i].failed_reports = &failedreports;
+		next_period = get_next_period(bulkdata->profile[i].time_reference, bulkdata->profile[i].reporting_interval);
+		bulkdata_log(SINFO, "The session of profile_id %d will be start in %d sec", bulkdata->profile[i].profile_id, next_period);
+		uloop_timeout_set(&bulkdata->profile[i].utimer, next_period * 1000);
+	}
+}
+
+int http_send_report(struct profile *profile, char *report)
+{
+	char *msg_in = NULL;
+	int http_code;
+
+	http_client_init(profile);
+	bulkdata_log(SINFO, "Send the report of profile_id %d to Bulkdata Collector", profile->profile_id);
+	http_code = http_send_message(profile, report, strlen(report), &msg_in);
+	http_client_exit();
+	return http_code;
+}
+
+void bulkdata_profile_cb(struct uloop_timeout *timeout)
+{
+	struct profile *profile;
+	unsigned int http_code, retry_period;
+	char *report = NULL;
+
+	profile = container_of(timeout, struct profile, utimer);
+	time_t now = time(NULL);
+
+	bulkdata_log(SINFO, "New session of profile_id %d started", profile->profile_id);
+	if(profile->retry_count == 0 || profile->next_retry > now || !profile->http_retry_enable) //Perdiodic execution
+		create_encoding_bulkdata_report(profile, &report);
+	else
+		create_failed_report(profile, &report);
+
+	bulkdata_log(SDEBUG, "The content of the profile_id report %d is :\n==========\n%s\n==========\n", profile->profile_id, report);
+	http_code= http_send_report(profile, report);
+	if(http_code != 200){
+		if(profile->retry_count == 0 || profile->next_retry > now || !profile->http_retry_enable) {  //Perdiodic execution
+			retry_period = get_retry_period(profile->http_retry_minimum_wait_interval);
+			profile->next_period = now + profile->reporting_interval;
+			profile->next_retry = now + retry_period;
+			profile->retry_count = 1;
+			profile->min_retry = profile->http_retry_minimum_wait_interval * 2;
+			if((profile->next_retry < profile->next_period) && profile->http_retry_enable) {
+				bulkdata_log(SINFO, "Retry session of profile_id %d in %d sec", profile->profile_id, retry_period);
+				uloop_timeout_set(timeout, 1000 * retry_period);
+			}
+			else {
+				bulkdata_log(SINFO, "Start New session of profile_id %d in %d sec", profile->profile_id, profile->reporting_interval);
+				uloop_timeout_set(timeout, 1000 * profile->reporting_interval);
+			}
+		} else { //Retry execution
+			retry_period= get_retry_period(profile->min_retry);
+			profile->min_retry*=2;
+			profile->next_retry+=retry_period;
+			profile->retry_count++;
+			if(profile->next_retry < profile->next_period) {
+				bulkdata_log(SINFO, "Retry session of profile_id %d in %d sec", profile->profile_id, retry_period);
+				uloop_timeout_set(timeout, 1000 * retry_period);
+			}
+			else {
+				bulkdata_log(SINFO, "Retry session of profile_id %d in %d sec", profile->profile_id, (profile->next_period-profile->next_retry+retry_period));
+				uloop_timeout_set(timeout, 1000 * (profile->next_period-profile->next_retry+retry_period));
+			}
+		}
+		if(profile->new_report){
+			bulkdata_add_failed_report(profile, profile->new_report);
+			FREE(profile->new_report);
+		}
+		FREE(report);
+	} else {
+		if(profile->retry_count == 0 || profile->next_retry > now || !profile->http_retry_enable) {
+			bulkdata_log(SINFO, "Start New session of profile_id %d in %d sec", profile->profile_id, profile->reporting_interval);
+			uloop_timeout_set(timeout, 1000 * profile->reporting_interval);
+		}
+		else {
+			bulkdata_log(SINFO, "Retry session of profile_id %d in %d sec", profile->profile_id, (profile->next_period-profile->next_retry));
+			uloop_timeout_set(timeout, 1000 * (profile->next_period-profile->next_retry));
+		}
+		FREE(profile->new_report);
+		FREE(report);
+		empty_failed_reports_list(profile);
+		profile->retry_count= 0;
+	}
+}
+
+int main(void)
+{
+	struct bulkdata *bulkdata = &bulkdata_main;
+	if (bulkdata_config_init(bulkdata) == -1)
+		return -1;
+	bulkdata_log(SINFO, "Start bulkdatad daemon");
+	
+	uloop_init();
+	bulkdata_run_profiles(bulkdata);
+	uloop_run();
+	uloop_done();
+
+	bulkdata_config_fini(bulkdata);
+	bulkdata_log(SINFO, "Stop bulkdatad daemon");
+	return 0;
+}

bulkdata/src/bulkdata.h

@@ -0,0 +1,18 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __BULKDATA_H
+#define __BULKDATA_H
+
+extern struct bulkdata bulkdata_main;
+extern int profiles_number;
+
+#endif /* __BULKDATA_H */

bulkdata/src/bulkdata.md

@@ -0,0 +1,105 @@
+# README #
+
+bulkdatad is an implementation of The HTTP bulk data collection mechanism which is an extended feature of CPE and other agents implementing TR-069(CWMP) or TR-369(USP), defined by the Broadband Forum. It provides a means by which an Auto-Configuration Server (ACS), or USP Controller, can configure an agent to periodically send a JSON or CSV formatted set of Device information to an HTTP server running a data collection application.
+
+## Configuration File ##
+
+The bulkdatad UCI configuration is located in **'/etc/config/bulkdata'**, and contains 4 sections: **bulkdata**, **profile**, **profile\_parameter** and **profile\_http\_request\_uri\_parameter**.
+
+```
+config bulkdata 'bulkdata'
+	option enable '0'
+	option log_level '3'
+
+config profile
+	option profile_id '1'
+	option enable '0'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_time_stamp 'unix'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+```
+
+### bulkdata section ###
+
+It defines **bulkdata configuration**: enable and log\_level.
+
+| Name        |  Type   | Description                                                                                     |
+| ----------- | ------- | ----------------------------------------------------------------------------------------------- |
+| `enable`    | boolean | Enables the BulkData feature if set to **1**.                                                     |
+| `log_level` | integer | Specifies the log type to use, by default **'INFO'**. The possible types are **'EMERG', 'ALERT', 'CRITIC' ,'ERROR', 'WARNING', 'NOTICE', 'INFO' and 'DEBUG'**. |
+
+### profile section ###
+
+It defines **the profile section configuration**: enable, name,... The possible options for **profile** section are listed below:
+
+| Name                               |  Type   | Description                                    |
+| ---------------------------------- | ------- | ---------------------------------------------- |
+| `profile_id`                       | integer | The profile id to use. |
+| `enable`                           | boolean | If set to **1**, enables the bulkdata profile. |
+| `name`                             | string  | The name of the profile. |
+| `nbre_of_retained_failed_reports`  | integer | The number of failed reports to be retained and transmitted at the end of the current reporting interval. |
+| `protocol`                         | string  | The protocol used for the collection profile. |
+| `encoding_type`                    | string  | The encoding type used for the collection profile. |
+| `reporting_interval`               | integer | The reporting interval in seconds. |
+| `time_reference`                   | integer | The time reference to determine when the profile will be transmitted to the ACS collector. |
+| `csv_encoding_field_separator`     | string  | The field separator to use when encoding CSV data. |
+| `csv_encoding_row_separator`       | string  | The row separator to use when encoding CSV data. |
+| `csv_encoding_escape_character`    | string  | The escape character to use when encoding CSV data. |
+| `csv_encoding_report_format`       | string  | Describes how reports will be formatted. Two possible formats are supported: **'ParameterPerRow' and 'ParameterPerColumn'**. |
+| `csv_encoding_row_time_stamp`      | string  | The format of the timestamp to use for data inserted into the row. The row time stamp supported are **'Unix-Epoch', 'ISO-8601' and 'None'**. |
+| `json_encoding_report_format`      | string  | Describes the report format. The supported report formats are **'ObjectHierarchy' and 'NameValuePair'**. |
+| `json_encoding_report_time_stamp`  | string  | The format of the timestamp to use for the JSON Object named "CollectionTime". The supported timestamp are **'Unix-Epoch', 'ISO-8601' and 'None'**. |
+| `http_url`                         | string  | The URL of the collection server. |
+| `http_username`                    | string  | The username of the collection server. |
+| `http_password`                    | string  | The password of the collection server. |
+| `http_compression`                 | string  | The HTTP Compression mechanism used by the collection server. The supported compression mechanism are **'GZIP', 'Compress' and 'Deflate'**. |
+| `http_method`                      | string  | The HTTP method used by the collection server. Two methods are supported: **'POST' and 'PUT'**. |
+| `http_use_date_header`             | boolean | If set to **1**, the CPE encodes the HTTP Date Header. |
+| `http_retry_enable`                | boolean | If set to **1**, the CPE retries unsuccessful attempts to transfer data. |
+| `http_retry_minimum_wait_interval` | integer | The data transfer retry wait interval. |
+| `http_retry_interval_multiplier`   | integer | The retry interval multiplier. |
+| `http_persist_across_reboot`       | boolean | If set to **1**, failed data transfers must be persisted across reboots. |
+
+### profile_parameter section ###
+
+It defines **the profile\_parameter section configuration**: profile\_id, name, reference.
+
+| Name         |  Type   | Description                             |
+| ------------ | ------- | --------------------------------------- |
+| `profile_id` | integer | The id of the used profile.             |
+| `name`       | string  | The name of the profile parameter.      |
+| `reference`  | string  | The reference of the profile parameter. |
+
+### profile_http_request_uri_parameter section ###
+
+It defines **the profile\_http\_request\_uri\_parameter section configuration**: profile\_id, name, reference.
+
+| Name         |  Type   | Description                             |
+| ------------ | ------- | --------------------------------------- |
+| `profile_id` | integer | The id of the used profile.             |
+| `name`       | string  | The name of the Request-URI parameter.  |
+| `reference`  | string  | The reference of the profile parameter. |
+
+## Dependencies ##
+
+To successfully build bulkdatad, the following libraries are needed:
+
+| Dependency  | Link                                        | License        |
+| ----------- | ------------------------------------------- | -------------- |
+| libuci      | https://git.openwrt.org/project/uci.git     | LGPL 2.1       |
+| libubox     | https://git.openwrt.org/project/libubox.git | BSD            |
+| libjson-c   | https://s3.amazonaws.com/json-c_releases    | MIT            |
+| libcurl     | https://dl.uxnr.de/mirror/curl              | MIT            |
+| libbbfdm    | https://dev.iopsys.eu/iopsys/bbf.git        | LGPL 2.1       |
+

bulkdata/src/common.c

@@ -0,0 +1,450 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*				Omar Kallel <omar.kallel@pivasoftware.com>
+*/
+
+#include "common.h"
+
+static pathnode *head = NULL;
+static pathnode *temphead = NULL;
+
+int bulkdata_dm_ctx_init(struct dmctx *ctx)
+{
+	struct bulkdata *bulkdata = &bulkdata_main;
+	dm_ctx_init(ctx, bulkdata->instance_mode);
+	return 0;
+}
+
+int bulkdata_dm_ctx_clean(struct dmctx *ctx)
+{
+	dm_ctx_clean(ctx);
+	return 0;
+}
+
+static char **str_split(const char* str, const char* delim, size_t* numtokens)
+{
+	char *s = strdup(str);
+	size_t tokens_alloc = 1;
+	size_t tokens_used = 0;
+	char **tokens = calloc(tokens_alloc, sizeof(char*));
+	char *token, *strtok_ctx;
+	for (token = strtok_r(s, delim, &strtok_ctx); token != NULL; token = strtok_r(NULL, delim, &strtok_ctx)) {
+		if (tokens_used == tokens_alloc) {
+			tokens_alloc *= 2;
+			tokens = realloc(tokens, tokens_alloc * sizeof(char*));
+		}
+		tokens[tokens_used++] = strdup(token);
+	}
+	// cleanup
+	if (tokens_used == 0) {
+		FREE(tokens);
+	} else {
+		tokens = realloc(tokens, tokens_used * sizeof(char*));
+	}
+	*numtokens = tokens_used;
+	FREE(s);
+	return tokens;
+}
+
+static bool bulkdata_match(const char *string, const char *pattern)
+{
+	regex_t re;
+	if (regcomp(&re, pattern, REG_EXTENDED) != 0) return 0;
+	int status = regexec(&re, string, 0, NULL, 0);
+	regfree(&re);
+	if (status != 0) return false;
+	return true;
+}
+
+static bool is_res_required(char *str, int *start, int *len)
+{
+	char temp_char[NAME_MAX] = {'\0'};
+
+	if (bulkdata_match(str, GLOB_CHAR)) {
+		int s_len = strlen(str);
+		int b_len = s_len, p_len = s_len;
+
+		char *star = strchr(str, '*');
+		if(star)
+			s_len = star - str;
+		*start = MIN(MIN(s_len, p_len), b_len);
+		if (*start == s_len)
+			*len = 1;
+
+		strncpy(temp_char, str+*start, *len);
+
+		if (bulkdata_match(temp_char, "[*+]+"))
+			return true;
+	}
+	*start = strlen(str);
+	return false;
+}
+
+static void insert(char *data, bool active)
+{
+	pathnode *link = (pathnode*) calloc(1, sizeof(pathnode));
+	if(!link) {
+		return;
+	}
+
+	link->ref_path = data;
+
+	if(active) {
+		link->next = head;
+		head = link;
+	} else {
+		link->next = temphead;
+		temphead = link;
+	}
+}
+
+static void swap_heads(void)
+{
+	pathnode *temp = head;
+	head = temphead;
+	temphead = temp;
+}
+
+static void deleteList(void)
+{
+	pathnode *ptr = head, *temp;
+	while(ptr != NULL) {
+		temp = ptr;
+		free(ptr->ref_path);
+		if(ptr->next != NULL) {
+			ptr = ptr->next;
+		} else {
+			ptr = NULL;
+		}
+		free(temp);
+	}
+	head = NULL;
+	swap_heads();
+}
+
+void bulkdata_add_data_to_list(struct list_head *dup_list, char *name, char *value, char *type)
+{
+	struct resultsnode *link;
+	link = calloc(1, sizeof(struct resultsnode));
+	list_add_tail(&link->list, dup_list);
+	link->name = strdup(name);
+	link->data = strdup(value);
+	link->type = strdup(type);
+}
+
+void bulkdata_delete_data_from_list(struct resultsnode *link)
+{
+	list_del(&link->list);
+	FREE(link->name);
+	FREE(link->data);
+	FREE(link->type);
+	FREE(link);
+}
+
+void bulkdata_free_data_from_list(struct list_head *dup_list)
+{
+	struct resultsnode *link;
+	while (dup_list->next != dup_list) {
+		link = list_entry(dup_list->next, struct resultsnode, list);
+		bulkdata_delete_data_from_list(link);
+	}
+}
+
+static bool bulkdata_get(int operation, char *path, struct dmctx *dm_ctx)
+{
+	int fault = 0;
+
+	switch(operation) {
+		case CMD_GET_NAME:
+			fault = dm_entry_param_method(dm_ctx, CMD_GET_NAME, path, "true", NULL);
+			break;
+		case CMD_GET_VALUE:
+			fault = dm_entry_param_method(dm_ctx, CMD_GET_VALUE, path, NULL, NULL);
+			break;
+		default:
+			return false;
+	}
+
+	if (dm_ctx->list_fault_param.next != &dm_ctx->list_fault_param) {
+		return false;
+	}
+	if (fault) {
+		return false;
+	}
+	return true;
+}
+
+char *bulkdata_get_value_param(char *path)
+{
+	struct dmctx ctx = {0};
+	struct dm_parameter *n;
+	char *value = NULL;
+
+	bulkdata_dm_ctx_init(&ctx);
+	if(bulkdata_get(CMD_GET_VALUE, path, &ctx)) {
+		list_for_each_entry(n, &ctx.list_parameter, list) {
+			value = strdup(n->data);
+			break;
+		}
+	}
+	bulkdata_dm_ctx_clean(&ctx);
+	return value;
+}
+
+void bulkdata_get_value(char *path, struct list_head *list)
+{
+	struct dmctx ctx = {0};
+	struct dm_parameter *n;
+
+	bulkdata_dm_ctx_init(&ctx);
+	if(bulkdata_get(CMD_GET_VALUE, path, &ctx)) {
+		list_for_each_entry(n, &ctx.list_parameter, list) {
+			bulkdata_add_data_to_list(list, n->name, n->data, n->type);
+		}
+	}
+	bulkdata_dm_ctx_clean(&ctx);
+}
+
+bool bulkdata_get_name(char *path)
+{
+	struct dmctx ctx = {0};
+	struct dm_parameter *n;
+	bool ret = false;
+
+	bulkdata_dm_ctx_init(&ctx);
+	if(bulkdata_get(CMD_GET_NAME, path, &ctx)) {
+		list_for_each_entry(n, &ctx.list_parameter, list) {
+			insert(strdup(n->name), false);
+		}
+		ret = true;
+	}
+	bulkdata_dm_ctx_clean(&ctx);
+	return ret;
+}
+
+static void fill_node_path(void)
+{
+	pathnode *p=head;
+	while(p!=NULL) {
+		bulkdata_get_name(p->ref_path);
+		p=p->next;
+	}
+	deleteList();
+}
+
+static void bulkdata_filter_results(char *path, int start, int end)
+{
+	int startpos = start, m_index = 0, m_len = 0;
+	char *pp = path + startpos;
+	char exp[NAME_MAX] = {'\0'};
+
+	if(start >= end) {
+		return;
+	}
+
+	if(!is_res_required(pp, &m_index, &m_len)) {
+		//append rest of the path to the final list
+		if(pp == path ) {
+			insert(strdup(pp), true);
+			return;
+		}
+
+		pathnode *p = head;
+		while(p != NULL) {
+			char name[NAME_MAX] = {'\0'};
+			strcpy(name, p->ref_path);
+			strcat(name, pp);
+			insert(strdup(name), false);
+			p = p->next;
+		}
+		deleteList();
+		return;
+	}
+
+	// Get the string before the match
+	char name[NAME_MAX]={'\0'};
+	strncpy(name, pp, m_index);
+
+	pathnode *p = head;
+	if(p == NULL) {
+		insert(strdup(name), false);
+	}
+
+	while(p != NULL) {
+		char ref_name[NAME_MAX] = {'\0'};
+		sprintf(ref_name, "%s%s", p->ref_path, name);
+		insert(strdup(ref_name), false);
+		p = p->next;
+	}
+	deleteList();
+
+	startpos += m_index;
+	strncpy(exp, pp+m_index, m_len);
+	pp = path + startpos;
+	fill_node_path();
+	startpos += 2;
+	bulkdata_filter_results(path, startpos, end);
+}
+
+static void bulkdata_parse_results(struct list_head *list)
+{
+	pathnode *p = head;
+	while(p != NULL) {
+		bulkdata_get_value(p->ref_path, list);
+		p = p->next;
+	}
+	deleteList();
+}
+
+void bulkdata_get_value_results(char *path, struct list_head *list)
+{
+	bulkdata_filter_results(path, 0, strlen(path));
+	bulkdata_parse_results(list);
+}
+
+char *create_request_url(struct profile *profile)
+{
+	int i = 0, http_uri_number = profile->profile_http_request_uri_parameter_number;
+	char *value, *uri_param = NULL, *uri_tmp = NULL, *http_url = NULL; 
+
+	for (i = 0; i < http_uri_number; i++)
+	{
+		if((profile->profile_http_uri_parameter[i].reference == NULL) || (profile->profile_http_uri_parameter[i].name == NULL))
+			continue;
+		value = bulkdata_get_value_param(profile->profile_http_uri_parameter[i].reference);
+		if(!uri_param) {
+			asprintf(&uri_param, "&%s=%s", profile->profile_http_uri_parameter[i].name, value);
+			free(value);
+		}
+		else {
+			uri_tmp = strdup(uri_param);
+			free(uri_param);
+			asprintf(&uri_param, "%s&%s=%s", uri_tmp, profile->profile_http_uri_parameter[i].name, value);
+			free(value);
+			free(uri_tmp);
+		}
+	}
+	if(uri_param) {
+		asprintf(&http_url, "%s%s", profile->http_url, uri_param);
+		free(uri_param);
+	} else {
+		asprintf(&http_url, "%s", profile->http_url);
+	}
+	return http_url;
+}
+
+char *get_bulkdata_profile_parameter_name(char *paramref, char *paramname, char *param)
+{
+	char **paramarr, *idx1 = NULL, *idx2 = NULL, *res = NULL, *instance = NULL, *tmp = NULL, *retparam = NULL, *s = NULL;
+	int i, j = 0;
+	size_t length;
+
+	if(paramname == NULL || strlen(paramname) <= 0)
+		return strdup(param);
+	paramarr = str_split(paramref, "*", &length);
+	res = strdup(paramname);
+	for(i = 0; i < length; i++) {
+		if(i == length - 1)
+			break;
+		j++;
+		idx1 = strstr(param, paramarr[i]);
+		idx2 = strstr(param, paramarr[i+1]);
+		instance = (char*)calloc(idx2 - idx1 - strlen(paramarr[i]) + 1, sizeof(char));
+		memcpy(instance, idx1 + strlen(paramarr[i]), idx2 - idx1 - strlen(paramarr[i]));
+		tmp = strdup(res);
+		FREE(res);
+		asprintf(&res, "%s.%s", tmp, instance);
+		FREE(tmp);
+		FREE(instance);
+	}
+	if ((s = strstr(param,paramarr[j]) ) != NULL && strlen(s) == strlen(paramarr[j]))
+		asprintf(&retparam, "%s", res);
+	else
+		asprintf(&retparam, "%s.%s", res, strstr(param, paramarr[j]) + strlen(paramarr[j]));
+
+	FREE(res);
+	for(int k = 0; k < length; k++)
+		FREE(paramarr[k]);
+	FREE(paramarr);
+
+	return retparam;
+}
+
+void append_string_to_string(char *strappend, char **target)
+{
+	char *tmp = NULL;
+
+	if(strappend == NULL || strlen(strappend) <= 0)
+		return;
+	if(*target == NULL || strlen(*target) <= 0) {
+		*target = strdup(strappend);
+		return;
+	} else {
+		tmp = strdup(*target);
+		FREE(*target);
+	}
+	asprintf(target, "%s%s", tmp, strappend);
+	FREE(tmp);
+}
+
+void bulkdata_add_failed_report(struct profile *profile, char *freport)
+{
+	struct failed_reports *report, *retreport, *rtmp;
+
+	if(profile->nbre_failed_reports < profile->nbre_of_retained_failed_reports || profile->nbre_of_retained_failed_reports < 0) {
+		profile->nbre_failed_reports++;
+	} else {
+		list_for_each_entry_safe(retreport, rtmp, profile->failed_reports, list) {
+			bulkdata_delete_failed_report(retreport);
+			break;
+		}
+	}
+	report = calloc(1, sizeof(struct failed_reports));
+	list_add_tail(&report->list, profile->failed_reports);
+	report->freport= strdup(freport);
+}
+
+void bulkdata_delete_failed_report(struct failed_reports *report)
+{
+	if(report != NULL) {
+		list_del(&report->list);
+		FREE(report->freport);
+		FREE(report);
+	}
+}
+
+struct failed_reports* empty_failed_reports_list(struct profile *profile)
+{
+	struct failed_reports *report, *rtmp;
+
+	if(list_empty(profile->failed_reports))
+		return NULL;
+	list_for_each_entry_safe(report, rtmp, profile->failed_reports, list) {
+		list_del(&report->list);
+		FREE(report->freport);
+		FREE(report);
+	}
+	return NULL;
+}
+
+void add_failed_reports_to_report_csv(struct profile *profile, char **report, int isnext)
+{
+	struct failed_reports *retreport = NULL;
+	int j = 0;
+
+	if(list_empty(profile->failed_reports))
+		return;
+	list_for_each_entry(retreport, profile->failed_reports, list) {
+		if(!j && isnext) {
+			j = 1;
+			continue;
+		}
+		append_string_to_string(retreport->freport, report);
+	}
+}

bulkdata/src/common.h

@@ -0,0 +1,69 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __COMMON_H
+#define __COMMON_H
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <regex.h>
+#include <sys/param.h>
+
+#include <libubox/blobmsg.h>
+#include <libubox/blobmsg_json.h>
+#include <libubox/utils.h>
+#include <libubus.h>
+
+#include <libbbfdm/dmentry.h>
+#include <libbbfdm/dmbbfcommon.h>
+
+#include "config.h"
+#include "log.h"
+#include "bulkdata.h"
+
+typedef struct pathnode {
+	char *ref_path;
+	struct pathnode *next;
+} pathnode;
+
+typedef struct resultsnode {
+	struct list_head list;
+	char *name;
+	char *data;
+	char *type;
+} resultsnode;
+
+struct failed_reports {
+	struct list_head list;
+	char *freport;
+};
+
+#define GLOB_CHAR "[[+*]+"
+
+int bulkdata_dm_ctx_init(struct dmctx *ctx);
+int bulkdata_dm_ctx_clean(struct dmctx *ctx);
+
+char *bulkdata_get_value_param(char *path);
+void bulkdata_get_value(char *path, struct list_head *list);
+
+void bulkdata_free_data_from_list(struct list_head *dup_list);
+void bulkdata_get_value_results(char *path, struct list_head *list);
+char *create_request_url(struct profile *profile);
+char *get_bulkdata_profile_parameter_name(char *paramref, char *paramname, char *param);
+void append_string_to_string(char *strappend, char **target);
+void bulkdata_add_failed_report(struct profile *profile, char *freport);
+void bulkdata_delete_failed_report(struct failed_reports *report);
+
+struct failed_reports *empty_failed_reports_list(struct profile *profile);
+void add_failed_reports_to_report_csv(struct profile *profile, char **report, int isnext);
+
+#endif //__COMMON_H

bulkdata/src/config.c

@@ -0,0 +1,523 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*				Omar Kallel <omar.kallel@pivasoftware.com>
+*/
+
+#include <stdio.h>
+#include <strings.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdarg.h>
+
+#include "log.h"
+#include "config.h"
+#include "buci.h"
+#include "common.h"
+#include "bulkdata.h"
+
+int get_log_level_config(struct bulkdata *bulkdata)
+{
+	char *value = NULL;
+
+	buci_init();
+	value = buci_get_value("bulkdata", "bulkdata", "log_level");
+	if(value != NULL && *value != '\0')
+		bulkdata->log_level = atoi(value);
+	else
+		bulkdata->log_level = DEFAULT_LOGLEVEL;
+	bulkdata_log(SDEBUG,"Log Level of Bulkdata is : %d", bulkdata->log_level);
+	buci_fini();
+	return 0;
+}
+
+int get_amd_version_config(struct bulkdata *bulkdata)
+{
+	char *value = NULL;
+
+	buci_init();
+	value = buci_get_value("cwmp", "cpe", "amd_version");
+	if(value != NULL && *value != '\0')
+		bulkdata->amd_version = atoi(value);
+	else
+		bulkdata->amd_version = DEFAULT_AMD_VERSION;
+	bulkdata_log(SDEBUG,"CWMP Amendment Version is : %d", bulkdata->amd_version);
+	buci_fini();
+	return 0;
+}
+
+int get_instance_mode_config(struct bulkdata *bulkdata)
+{
+	char *value = NULL;
+
+	buci_init();
+	value = buci_get_value("cwmp", "cpe", "instance_mode");
+	if(value != NULL && *value != '\0') {
+		if(!strcmp(value, "InstanceNumber"))
+			bulkdata->instance_mode = INSTANCE_MODE_NUMBER;
+		else
+			bulkdata->instance_mode = INSTANCE_MODE_ALIAS;
+	}
+	else
+		bulkdata->instance_mode = DEFAULT_INSTANCE_MODE;
+	bulkdata_log(SDEBUG,"CWMP Instance Mode is : %d", bulkdata->instance_mode);
+	buci_fini();
+
+	return 0;
+}
+
+int get_device_id_config(struct bulkdata *bulkdata)
+{
+	struct dmctx dmctx = {0};
+
+	bulkdata_dm_ctx_init(&dmctx);
+	bulkdata->device_id.manufacturer_oui = bulkdata_get_value_param("Device.DeviceInfo.ManufacturerOUI");
+	bulkdata->device_id.product_class = bulkdata_get_value_param("Device.DeviceInfo.ProductClass");
+	bulkdata->device_id.serial_number = bulkdata_get_value_param("Device.DeviceInfo.SerialNumber");
+	bulkdata_dm_ctx_clean(&dmctx);
+
+	return 0;
+}
+
+int load_profile_config(struct bulkdata *bulkdata, struct uci_section *s, int i)
+{
+	char *value = NULL;
+
+	value = buci_get_value_bysection(s, "profile_id");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].profile_id = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The profile_id of profile_id %d is : %d", i, bulkdata->profile[i].profile_id);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "nbre_of_retained_failed_reports");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].nbre_of_retained_failed_reports = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The nombre of retained failed reports of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].nbre_of_retained_failed_reports);
+	}
+
+	value = buci_get_value_bysection(s, "protocol");
+	if(value != NULL && *value != '\0' && strcasecmp(value, "http")==0) {
+		bulkdata->profile[i].protocol = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The protocol of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].protocol);
+	} else
+		return -1;
+	
+	value = buci_get_value_bysection(s, "encoding_type");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].encoding_type = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The encoding type of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].encoding_type);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "reporting_interval");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].reporting_interval = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The reporting interval of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].reporting_interval);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "time_reference");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].time_reference = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The time reference of profile_id %d is : %ld", bulkdata->profile[i].profile_id, bulkdata->profile[i].time_reference);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "csv_encoding_field_separator");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].csv_encoding_field_separator = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The csv encoding field separator of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].csv_encoding_field_separator);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "csv_encoding_row_separator");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].csv_encoding_row_separator = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The csv encoding row separator of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].csv_encoding_row_separator);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "csv_encoding_escape_character");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].csv_encoding_escape_character = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The csv encoding escape character of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].csv_encoding_escape_character);
+	}
+
+	value = buci_get_value_bysection(s, "csv_encoding_report_format");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].csv_encoding_report_format = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The csv encoding report format of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].csv_encoding_report_format);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "csv_encoding_row_time_stamp");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].csv_encoding_row_time_stamp = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The csv encoding row time stamp of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].csv_encoding_row_time_stamp);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "json_encoding_report_format");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].json_encoding_report_format = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The json encoding report format of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].json_encoding_report_format);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "json_encoding_report_time_stamp");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].json_encoding_report_time_stamp = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The json encoding report time stamp of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].json_encoding_report_time_stamp);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_url");
+	if(value != NULL && *value != '\0') {
+		char *url = NULL;
+		asprintf(&url, "%s?oui=%s&pc=%s&sn=%s", value, bulkdata->device_id.manufacturer_oui, bulkdata->device_id.serial_number, bulkdata->device_id.serial_number);
+		bulkdata->profile[i].http_url = strdup(url);
+		free(url);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP url of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_url);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_username");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_username = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP username of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_username);
+	} else {
+		bulkdata->profile[i].http_username = NULL;
+	}
+
+	value = buci_get_value_bysection(s, "http_password");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_password = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP password of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_password);
+	} else {
+		bulkdata->profile[i].http_password = NULL;
+	}
+
+	value = buci_get_value_bysection(s, "http_compression");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_compression = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP compression of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_compression);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_method");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_method = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP method of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_method);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_use_date_header");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_use_date_header = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP use date header of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_use_date_header);
+	}
+
+	value = buci_get_value_bysection(s, "http_retry_enable");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_retry_enable = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP retry enable of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_retry_enable);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_retry_minimum_wait_interval");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_retry_minimum_wait_interval = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP retry minimum wait interval of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_retry_minimum_wait_interval);
+	}
+
+	value = buci_get_value_bysection(s, "http_retry_interval_multiplier");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_retry_interval_multiplier = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP retry interval multiplier of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_retry_interval_multiplier);
+	}
+
+	value = buci_get_value_bysection(s, "http_persist_across_reboot");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_persist_across_reboot = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP persist across reboot of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_persist_across_reboot);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "http_ssl_capath");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_ssl_capath = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP ssl capath of profile_id %d is : %s", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_ssl_capath);
+	} else {
+		bulkdata->profile[i].http_ssl_capath = NULL;
+	}
+
+	value = buci_get_value_bysection(s, "http_insecure_enable");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].http_insecure_enable = atoi(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP insecure enable of profile_id %d is : %d", bulkdata->profile[i].profile_id, bulkdata->profile[i].http_insecure_enable);
+	}
+
+	bulkdata->profile[i].retry_count = 0;
+	bulkdata->profile[i].nbre_failed_reports = 0;
+
+	return 0;
+}
+
+int get_profiles_enable(struct bulkdata *bulkdata)
+{
+	struct uci_section *s;
+	char *enable;
+	int i = 0, nbr_profiles = 0;
+
+	buci_init();
+
+	buci_foreach_section("bulkdata", "profile", s) {
+		enable = buci_get_value_bysection(s, "enable");
+		if(strcmp(enable, "1") == 0) {
+			nbr_profiles++;
+		}
+	}
+
+	if(nbr_profiles != 0)
+		bulkdata->profile = calloc(2, sizeof(struct profile));
+	
+	buci_foreach_section("bulkdata", "profile", s) {
+		enable = buci_get_value_bysection(s, "enable");
+		if(strcmp(enable, "1") == 0) {
+			if(load_profile_config(bulkdata, s, i) == -1) {
+				bulkdata_log(SCRIT,"Not able to start bulkdata: some required bulkdata configurations in profile must be set");
+				return -1;
+			}
+			i++;
+		}
+	}
+	profiles_number = nbr_profiles;
+
+	buci_fini();
+	return 0;
+}
+
+int load_profile_parameter_config(struct bulkdata *bulkdata, struct uci_section *s, int i, int j)
+{
+	char *value = NULL;
+
+	value = buci_get_value_bysection(s, "name");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].profile_parameter[j].name = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The parameter name %d of profile_id %d is : %s", j+1, bulkdata->profile[i].profile_id, bulkdata->profile[i].profile_parameter[j].name);
+	} else {
+		bulkdata->profile[i].profile_parameter[j].name = NULL;
+	}
+
+	value = buci_get_value_bysection(s, "reference");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].profile_parameter[j].reference = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The parameter reference %d of profile_id %d is : %s", j+1, bulkdata->profile[i].profile_id, bulkdata->profile[i].profile_parameter[j].reference);
+	} else
+		return -1;
+
+	return 0;
+}
+
+int get_profiles_parameters(struct bulkdata *bulkdata)
+{
+	struct uci_section *s;
+	char *profile_id;
+	int i, j, nbr_profile_parameters;
+
+	buci_init();
+
+	for (i = 0; i < profiles_number; i++) {
+		j = 0;
+		nbr_profile_parameters = 0;
+		buci_foreach_section("bulkdata", "profile_parameter", s) {
+			profile_id = buci_get_value_bysection(s, "profile_id");
+			if(bulkdata->profile[i].profile_id != atoi(profile_id))
+				continue;
+			nbr_profile_parameters++;
+			if(nbr_profile_parameters == 1) {
+				bulkdata->profile[i].profile_parameter = calloc(1, sizeof(struct profile_parameter));
+			} else {
+				bulkdata->profile[i].profile_parameter = realloc(bulkdata->profile[i].profile_parameter, nbr_profile_parameters * sizeof(struct profile_parameter));
+			}
+			if(load_profile_parameter_config(bulkdata, s, i, j) == -1) {
+				bulkdata_log(SCRIT,"Not able to start bulkdata: some required bulkdata configurations in profile_parameter must be set");
+				return -1;
+			}
+			j++;
+		}
+		bulkdata->profile[i].profile_parameter_number = nbr_profile_parameters;
+	}
+
+	buci_fini();
+	return 0;
+}
+
+int load_profile_http_request_uri_parameter_config(struct bulkdata *bulkdata, struct uci_section *s, int i, int j)
+{
+	char *value = NULL;
+
+	value = buci_get_value_bysection(s, "name");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].profile_http_uri_parameter[j].name = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP resuest URI parameter name %d of profile_id %d is : %s", j+1, bulkdata->profile[i].profile_id, bulkdata->profile[i].profile_http_uri_parameter[j].name);
+	} else
+		return -1;
+
+	value = buci_get_value_bysection(s, "reference");
+	if(value != NULL && *value != '\0') {
+		bulkdata->profile[i].profile_http_uri_parameter[j].reference = strdup(value);
+		value = NULL;
+		bulkdata_log(SDEBUG,"The HTTP resuest URI parameter reference %d of profile_id %d is : %s", j+1, bulkdata->profile[i].profile_id, bulkdata->profile[i].profile_http_uri_parameter[j].reference);
+	} else
+		return -1;
+
+	return 0;
+}
+
+int get_profile_http_request_uri_parameter(struct bulkdata *bulkdata)
+{
+	struct uci_section *s;
+	char *profile_id;
+	int i, j, nbr_profile_http_request_uri_parameter;
+
+	buci_init();
+
+	for (i = 0; i < profiles_number; i++) {
+		j = 0;
+		nbr_profile_http_request_uri_parameter = 0;
+		buci_foreach_section("bulkdata", "profile_http_request_uri_parameter", s) {
+			profile_id = buci_get_value_bysection(s, "profile_id");
+			if(bulkdata->profile[i].profile_id != atoi(profile_id))
+				continue;
+			nbr_profile_http_request_uri_parameter++;
+			if(nbr_profile_http_request_uri_parameter == 1) {
+				bulkdata->profile[i].profile_http_uri_parameter = calloc(1, sizeof(struct profile_http_request_uri_parameter));
+			} else {
+				bulkdata->profile[i].profile_http_uri_parameter = realloc(bulkdata->profile[i].profile_http_uri_parameter, nbr_profile_http_request_uri_parameter * sizeof(struct profile_http_request_uri_parameter));
+			}
+			if(load_profile_http_request_uri_parameter_config(bulkdata, s, i, j)== -1) {
+				bulkdata_log(SCRIT,"Not able to start bulkdata: some required bulkdata configurations in profile_http_request_uri_parameter must be set");
+				return -1;
+			}
+			j++;
+		}
+		bulkdata->profile[i].profile_http_request_uri_parameter_number = nbr_profile_http_request_uri_parameter;
+	}
+
+	buci_fini();
+	return 0;
+}
+
+int bulkdata_config_init(struct bulkdata *bulkdata)
+{
+	get_log_level_config(bulkdata);
+	get_amd_version_config(bulkdata);
+	get_instance_mode_config(bulkdata);
+	get_device_id_config(bulkdata);
+	if (get_profiles_enable(bulkdata) == -1)
+		return -1;
+	if (get_profiles_parameters(bulkdata) == -1)
+		return -1;
+	if (get_profile_http_request_uri_parameter(bulkdata) == -1)
+		return -1;
+	return 0;
+}
+
+int free_device_id_config(struct bulkdata *bulkdata)
+{
+	FREE(bulkdata->device_id.manufacturer_oui);
+	FREE(bulkdata->device_id.product_class);
+	FREE(bulkdata->device_id.serial_number);
+	return 0;
+}
+
+int free_profiles_enable(struct bulkdata *bulkdata)
+{
+	for(int i = 0; i < profiles_number; i++) {
+		FREE(bulkdata->profile[i].protocol);
+		FREE(bulkdata->profile[i].encoding_type);
+		FREE(bulkdata->profile[i].csv_encoding_field_separator);
+		FREE(bulkdata->profile[i].csv_encoding_row_separator);
+		FREE(bulkdata->profile[i].csv_encoding_escape_character);
+		FREE(bulkdata->profile[i].csv_encoding_report_format);
+		FREE(bulkdata->profile[i].csv_encoding_row_time_stamp);
+		FREE(bulkdata->profile[i].json_encoding_report_format);
+		FREE(bulkdata->profile[i].json_encoding_report_time_stamp);
+		FREE(bulkdata->profile[i].http_url);
+		FREE(bulkdata->profile[i].http_username);
+		FREE(bulkdata->profile[i].http_password);
+		FREE(bulkdata->profile[i].http_compression);
+		FREE(bulkdata->profile[i].http_method);
+		FREE(bulkdata->profile[i].http_ssl_capath);
+	}
+	FREE(bulkdata->profile);
+	return 0;
+}
+
+int free_profiles_parameters(struct bulkdata *bulkdata)
+{
+	for(int i = 0; i < profiles_number; i++) {
+		for(int j = 0; j < bulkdata->profile[i].profile_parameter_number; j++) {
+			FREE(bulkdata->profile[i].profile_parameter[j].name);
+			FREE(bulkdata->profile[i].profile_parameter[j].reference);
+		}
+		FREE(bulkdata->profile[i].profile_parameter);
+	}
+	return 0;
+}
+
+int free_profile_http_request_uri_parameter(struct bulkdata *bulkdata)
+{
+	for(int i = 0; i < profiles_number; i++) {
+		for(int j = 0; j < bulkdata->profile[i].profile_http_request_uri_parameter_number; j++) {
+			FREE(bulkdata->profile[i].profile_http_uri_parameter[j].name);
+			FREE(bulkdata->profile[i].profile_http_uri_parameter[j].reference);
+		}
+		FREE(bulkdata->profile[i].profile_http_uri_parameter);
+	}
+	return 0;
+}
+
+int bulkdata_config_fini(struct bulkdata *bulkdata)
+{
+	free_device_id_config(bulkdata);
+	free_profiles_parameters(bulkdata);
+	free_profile_http_request_uri_parameter(bulkdata);
+	free_profiles_enable(bulkdata);
+	return 0;
+}

bulkdata/src/config.h

@@ -0,0 +1,103 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <time.h>
+#include <libubox/uloop.h>
+
+#define DEFAULT_AMD_VERSION 2
+#define DEFAULT_INSTANCE_MODE 0
+
+typedef struct device_id {
+	char *manufacturer_oui;
+	char *product_class;
+	char *serial_number;
+} device_id;
+
+typedef struct profile_parameter {
+	int profile_id;
+	char *name;
+	char *reference;
+} profile_parameter;
+
+typedef struct profile_http_request_uri_parameter {
+	int profile_id;
+	char *name;
+	char *reference;
+} profile_http_request_uri_parameter;
+
+typedef struct profile {
+	struct uloop_timeout utimer;
+	int profile_id;
+	int nbre_of_retained_failed_reports;
+	int nbre_failed_reports;
+	int reporting_interval;
+	int profile_parameter_number;
+	int profile_http_request_uri_parameter_number;
+	int http_retry_minimum_wait_interval;
+	int http_retry_interval_multiplier;
+	int min_retry;
+	int retry_count;
+	char *protocol;
+	char *encoding_type;
+	char *csv_encoding_field_separator;
+	char *csv_encoding_row_separator;
+	char *csv_encoding_escape_character;
+	char *csv_encoding_report_format;
+	char *csv_encoding_row_time_stamp;
+	char *json_encoding_report_format;
+	char *json_encoding_report_time_stamp;
+	char *http_url;
+	char *http_username;
+	char *http_password;
+	char *http_compression;
+	char *http_method;
+	char *http_ssl_capath;
+	char *new_report;
+	time_t time_reference;
+	time_t next_retry;
+	time_t next_period;
+	bool http_persist_across_reboot;
+	bool http_insecure_enable;
+	bool enable;
+	bool http_use_date_header;
+	bool http_retry_enable;
+	struct profile_parameter *profile_parameter;
+	struct profile_http_request_uri_parameter *profile_http_uri_parameter;
+	struct list_head *failed_reports;
+} profile;
+
+typedef struct bulkdata {
+	struct device_id							device_id;
+	struct profile								*profile;
+	int 										log_level;
+	int 										amd_version;
+	unsigned int 								instance_mode;
+} bulkdata;
+
+int bulkdata_config_init(struct bulkdata *bulkdata);
+int bulkdata_config_fini(struct bulkdata *bulkdata);
+
+#ifndef FREE
+#define FREE(x) do { if(x) {free(x); x = NULL;} } while (0)
+#endif
+
+#endif //__CONFIG_H
+
+
+
+
+

bulkdata/src/datamodel.h

@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2020 iopsys Software Solutions AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License version 2.1
+ * as published by the Free Software Foundation
+ *
+ *		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+ */
+
+#ifndef _BULKDATA_H_
+#define _BULKDATA_H_
+
+#include <libbbf_api/dmcommon.h>
+
+extern DMOBJ tDeviceBulkDataObj[];
+extern DMOBJ tBulkDataObj[];
+extern DMLEAF tBulkDataParams[];
+extern DMOBJ tBulkDataProfileObj[];
+extern DMLEAF tBulkDataProfileParams[];
+extern DMLEAF tBulkDataProfileParameterParams[];
+extern DMLEAF tBulkDataProfileCSVEncodingParams[];
+extern DMLEAF tBulkDataProfileJSONEncodingParams[];
+extern DMOBJ tBulkDataProfileHTTPObj[];
+extern DMLEAF tBulkDataProfileHTTPParams[];
+extern DMLEAF tBulkDataProfileHTTPRequestURIParameterParams[];
+
+#endif //__BULKDATA_H_
+

bulkdata/src/http.c

@@ -0,0 +1,196 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*				Omar Kallel <omar.kallel@pivasoftware.com>
+*/
+
+#include "http.h"
+
+static struct http_client http_c;
+static CURL *curl;
+
+int http_client_init(struct profile *profile)
+{
+	char *url = create_request_url(profile);
+	if(url) {
+		asprintf(&http_c.url, "%s", url);
+		free(url);
+	}
+	bulkdata_log(SINFO, "ACS url: %s", http_c.url);
+
+	curl_global_init(CURL_GLOBAL_SSL);
+	curl = curl_easy_init();
+	if (!curl) return -1;
+
+	return 0;
+}
+
+void http_client_exit(void)
+{
+	FREE(http_c.url);
+
+	if (http_c.header_list) {
+		curl_slist_free_all(http_c.header_list);
+		http_c.header_list = NULL;
+	}
+
+	curl_easy_cleanup(curl);
+	curl_global_cleanup();
+
+}
+
+static size_t http_get_response(void *buffer, size_t size, size_t rxed, char **msg_in)
+{
+	char *c;
+
+	if (asprintf(&c, "%s%.*s", *msg_in, (int) (size * rxed), (char *)buffer) == -1) {
+		FREE(*msg_in);
+		return -1;
+	}
+
+	free(*msg_in);
+	*msg_in = c;
+
+	return size * rxed;
+}
+
+int http_send_message(struct profile *profile, char *msg_out, int msg_out_len, char **msg_in)
+{
+	CURLcode res;
+	long http_code = 0;
+	char errbuf[CURL_ERROR_SIZE];
+
+	http_c.header_list = NULL;
+	http_c.header_list = curl_slist_append(http_c.header_list, "User-Agent: iopsys-bulkdata");
+	if (!http_c.header_list) return -1;
+
+	if (profile->http_use_date_header) {
+		if (bulkdata_get_time() != NULL) {
+			http_c.header_list = curl_slist_append(http_c.header_list, bulkdata_get_time());
+			if (!http_c.header_list) return -1;
+		}
+	}
+
+	if (strcmp(profile->encoding_type, "json") == 0) {
+		http_c.header_list = curl_slist_append(http_c.header_list, "Content-Type: application/json; charset=\"utf-8\"");
+		if (!http_c.header_list) return -1;
+
+		if(strcmp (profile->json_encoding_report_format, "objecthierarchy") == 0) {
+			http_c.header_list = curl_slist_append(http_c.header_list, "BBF-Report-Format: \"ObjectHierarchy\"");
+			if (!http_c.header_list) return -1;
+		} else if(strcmp(profile->json_encoding_report_format, "namevaluepair") == 0) {
+			http_c.header_list = curl_slist_append(http_c.header_list, "BBF-Report-Format: \"NameValuePair\"");
+			if (!http_c.header_list) return -1;
+		}
+	} else if(strcmp(profile->encoding_type, "csv") == 0) {
+		http_c.header_list = curl_slist_append(http_c.header_list, "Content-Type: text/csv; charset=\"utf-8\"");
+		if (!http_c.header_list) return -1;
+
+		if(strcmp (profile->csv_encoding_report_format, "row") == 0) {
+			http_c.header_list = curl_slist_append(http_c.header_list, "BBF-Report-Format: \"ParameterPerRow\"");
+			if (!http_c.header_list) return -1;
+		} else if(strcmp (profile->csv_encoding_report_format, "column") == 0) {
+			http_c.header_list = curl_slist_append(http_c.header_list, "BBF-Report-Format: \"ParameterPerColumn\"");
+			if (!http_c.header_list) return -1;
+		}
+	}
+
+	curl_easy_setopt(curl, CURLOPT_URL, http_c.url);
+	curl_easy_setopt(curl, CURLOPT_USERNAME, profile->http_username);
+	curl_easy_setopt(curl, CURLOPT_PASSWORD, profile->http_password);
+	curl_easy_setopt(curl, CURLOPT_HTTPAUTH, CURLAUTH_BASIC|CURLAUTH_DIGEST);
+	curl_easy_setopt(curl, CURLOPT_TIMEOUT, HTTP_TIMEOUT);
+	curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT, HTTP_TIMEOUT);
+	curl_easy_setopt(curl, CURLOPT_FOLLOWLOCATION, 1L);
+	curl_easy_setopt(curl, CURLOPT_POSTREDIR, CURL_REDIR_POST_ALL);
+	curl_easy_setopt(curl, CURLOPT_NOBODY, 0);
+
+	if(strcasecmp(profile->http_compression, "gzip") == 0) {
+		curl_easy_setopt(curl, CURLOPT_ACCEPT_ENCODING, "gzip");
+		http_c.header_list = curl_slist_append(http_c.header_list, "Content-Encoding: gzip");
+	} else if(strcasecmp(profile->http_compression, "compress") == 0) {
+		curl_easy_setopt(curl, CURLOPT_ACCEPT_ENCODING, "compress");
+		http_c.header_list = curl_slist_append(http_c.header_list, "Content-Encoding: compress");
+	} else if(strcasecmp(profile->http_compression, "deflate") == 0) {
+		curl_easy_setopt(curl, CURLOPT_ACCEPT_ENCODING, "deflate");
+		http_c.header_list = curl_slist_append(http_c.header_list, "Content-Encoding: deflate");	
+	}
+
+	curl_easy_setopt(curl, CURLOPT_HTTPHEADER, http_c.header_list);
+	if(strcasecmp(profile->http_method, "put") == 0)
+		curl_easy_setopt(curl, CURLOPT_CUSTOMREQUEST, "PUT");
+	curl_easy_setopt(curl, CURLOPT_POSTFIELDS, msg_out);
+	if (msg_out)
+		curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, (long) msg_out_len);
+	else
+		curl_easy_setopt(curl, CURLOPT_POSTFIELDSIZE, 0);
+
+	curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, http_get_response);
+	curl_easy_setopt(curl, CURLOPT_WRITEDATA, msg_in);
+
+	curl_easy_setopt(curl, CURLOPT_ERRORBUFFER, errbuf);
+	
+	if (profile->http_ssl_capath)
+		curl_easy_setopt(curl, CURLOPT_CAPATH, profile->http_ssl_capath);
+	if (profile->http_insecure_enable) {
+		curl_easy_setopt(curl, CURLOPT_SSL_VERIFYPEER, false);
+		curl_easy_setopt(curl, CURLOPT_SSL_VERIFYHOST, 0);		
+	}
+	*msg_in = (char *) calloc (1, sizeof(char));
+
+	res = curl_easy_perform(curl);
+
+	if(res != CURLE_OK) {
+		size_t len = strlen(errbuf);
+		if(len) {
+			if (errbuf[len - 1] == '\n') errbuf[len - 1] = '\0';
+			bulkdata_log(SCRIT, "libcurl: (%d) %s", res, errbuf);
+		} else {
+			bulkdata_log(SCRIT, "libcurl: (%d) %s", res, curl_easy_strerror(res));
+		}
+	}
+
+	if (!strlen(*msg_in))
+		FREE(*msg_in);
+
+	curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &http_code);
+	if(http_code == 200)
+		bulkdata_log(SINFO, "Receive HTTP 200 OK from Bulkdata Collector");
+	else if(http_code == 401)
+		bulkdata_log(SINFO, "Receive HTTP 401 Unauthorized from Bulkdata Collector");
+	else if(http_code == 204)
+		bulkdata_log(SINFO, "Receive HTTP 204 No Content from Bulkdata Collector");
+	else
+		bulkdata_log(SINFO, "Receive HTTP %d from Bulkdata Collector", http_code);
+
+	if(http_code == 415)
+	{
+		strcpy(profile->http_compression, "None");
+		goto error;
+	}
+	if (http_code != 200 && http_code != 204)
+		goto error;
+
+	curl_easy_reset(curl);
+	if (http_c.header_list) {
+		curl_slist_free_all(http_c.header_list);
+		http_c.header_list = NULL;
+	}
+
+	if (res) goto error;
+
+	return http_code;
+
+error:
+	FREE(*msg_in);
+	if (http_c.header_list) {
+		curl_slist_free_all(http_c.header_list);
+		http_c.header_list = NULL;
+	}
+	return -1;
+}

bulkdata/src/http.h

@@ -0,0 +1,37 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __HTTP_H
+#define __HTTP_H
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <errno.h>
+#include <curl/curl.h>
+#include "config.h"
+#include "log.h"
+#include "times.h"
+#include "common.h"
+
+#define HTTP_TIMEOUT 30
+
+struct http_client
+{
+	struct curl_slist *header_list;
+	char *url;
+};
+
+int http_client_init(struct profile *profile);
+void http_client_exit(void);
+int http_send_message(struct profile *profile, char *msg_out, int msg_out_len, char **msg_in);
+
+#endif //__HTTP_H

bulkdata/src/log.c

@@ -0,0 +1,57 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <syslog.h>
+#include <time.h>
+
+#include "bulkdata.h"
+#include "config.h"
+#include "log.h"
+
+static const int log_syslogmap[] = {
+	[SCRIT] = LOG_CRIT,
+	[SWARNING] = LOG_WARNING,
+	[SNOTICE] = LOG_NOTICE,
+	[SINFO] = LOG_INFO,
+	[SDEBUG] = LOG_DEBUG
+};
+
+static const char* log_str[] = {
+	[SCRIT] = "CRITICAL",
+	[SWARNING] = "WARNING",
+	[SNOTICE] = "NOTICE",
+	[SINFO] = "INFO",
+	[SDEBUG] = "DEBUG"
+};
+
+void bulkdata_log(int priority, const char *format, ...)
+{
+	va_list vl;
+
+	if (priority <= bulkdata_main.log_level) {
+		time_t t = time(NULL);
+		struct tm tm = *localtime(&t);
+		va_start(vl, format);
+		printf("%d-%02d-%02d %02d:%02d:%02d [bulkdata] %s - ", tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec, log_str[priority]);
+		vprintf(format, vl);
+		va_end(vl);
+		printf("\n");
+
+		openlog("bulkdata", 0, LOG_DAEMON);
+		va_start(vl, format);
+		vsyslog(log_syslogmap[priority], format, vl);
+		va_end(vl);
+		closelog();
+	}
+}

bulkdata/src/log.h

@@ -0,0 +1,28 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __LOG_H
+#define __LOG_H
+
+#define DEFAULT_LOGLEVEL SINFO
+
+enum bulkdata_log_level_enum {
+	SCRIT,
+	SWARNING,
+	SNOTICE,
+	SINFO,
+	SDEBUG,
+	__MAX_SLOG
+};
+
+void bulkdata_log(int priority, const char *format, ...);
+
+#endif //__LOG_H

bulkdata/src/report.c

@@ -0,0 +1,336 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*		Author: Omar Kallel <omar.kallel@pivasoftware.com>
+*
+*/
+
+#include "report.h"
+
+static void add_new_json_obj(json_object *json_obj, char *name, char *data, char *type)
+{
+	json_object *jobj;
+	if(strstr(type, "unsignedInt") || strstr(type, "int") || strstr(type, "long"))
+		jobj = json_object_new_int64(atoi(data));
+	else if(strstr(type, "bool"))
+		jobj = json_object_new_boolean(atoi(data));
+	else
+		jobj = json_object_new_string(data);
+
+	json_object_object_add(json_obj, name, jobj);
+}
+
+static void create_json_bulkdata_report_object_hierarchy(struct profile *profile, char **report)
+{
+	struct json_object *json_obj, *json_obj1, *json_obj2;
+	struct resultsnode *p;
+	int i, j, profile_param_number = profile->profile_parameter_number;
+	char *param_name, *result, *pch, *pchr, *collection_time = NULL;
+	char buf[1024] = {0};
+
+	json_obj = json_object_new_object();
+	get_time_stamp(profile->json_encoding_report_time_stamp, &collection_time);
+	if(collection_time) {
+		if(strcmp(profile->json_encoding_report_time_stamp, "iso8601") == 0)
+			json_object_object_add(json_obj, "CollectionTime", json_object_new_string(collection_time));
+		else
+			json_object_object_add(json_obj, "CollectionTime", json_object_new_int64(atoi(collection_time)));
+		free(collection_time);
+	}
+	json_obj2 = json_obj;
+	for (i = 0; i < profile_param_number; i++) {
+		LIST_HEAD(results_list);
+		bulkdata_get_value_results(profile->profile_parameter[i].reference, &results_list);
+		list_for_each_entry(p, &results_list, list) {
+			char *argv[128] = {0};
+			j = 0;
+			param_name = get_bulkdata_profile_parameter_name(profile->profile_parameter[i].reference, profile->profile_parameter[i].name, p->name);
+			strcpy(buf, param_name);
+			for (pch = strtok_r(buf, ".", &pchr); pch != NULL; pch = strtok_r(NULL, ".", &pchr)) {
+				argv[j] = pch;
+				json_obj1 = (json_object *)bbf_api_dmjson_select_obj(json_obj, argv);
+				if (json_obj1)
+					json_obj2 = json_obj1;
+				else {
+					if (pchr != NULL && *pchr != '\0') {
+						json_object *new_obj = json_object_new_object();
+						json_object_object_add(json_obj2, pch, new_obj);
+						json_obj2 = new_obj;
+					}
+					else
+						add_new_json_obj(json_obj2, pch, p->data, p->type);
+				}
+				j++;
+			}
+		}
+		bulkdata_free_data_from_list(&results_list);
+		FREE(param_name);
+	}
+	result = (char *)json_object_to_json_string_ext(json_obj, JSON_C_TO_STRING_PRETTY);
+	*report = strdup(result);
+	json_object_put(json_obj);
+}
+
+static void create_json_bulkdata_report_name_value_pair(struct profile *profile, char **report)
+{
+	struct json_object *json_obj;
+	struct resultsnode *p;
+	char *param_name, *result, *collection_time = NULL;
+	int i = 0, profile_param_number = profile->profile_parameter_number;
+
+	json_obj = json_object_new_object();
+	get_time_stamp(profile->json_encoding_report_time_stamp, &collection_time);
+	if(collection_time) {
+		if(strcmp(profile->json_encoding_report_time_stamp, "iso8601") == 0)
+			json_object_object_add(json_obj, "CollectionTime", json_object_new_string(collection_time));
+		else
+			json_object_object_add(json_obj, "CollectionTime", json_object_new_int64(atoi(collection_time)));
+		free(collection_time);
+	}
+	for (i = 0; i < profile_param_number; i++) {
+		LIST_HEAD(results_list);
+		bulkdata_get_value_results(profile->profile_parameter[i].reference, &results_list);
+		list_for_each_entry(p, &results_list, list) {
+			param_name = get_bulkdata_profile_parameter_name(profile->profile_parameter[i].reference, profile->profile_parameter[i].name, p->name);
+			add_new_json_obj(json_obj, param_name, p->data, p->type);
+			FREE(param_name);
+		}
+		bulkdata_free_data_from_list(&results_list);
+	}
+	result = (char *)json_object_to_json_string_ext(json_obj, JSON_C_TO_STRING_PRETTY);
+	*report = strdup(result);
+	json_object_put(json_obj);
+}
+
+static void add_failed_reports_to_report_json(struct profile *profile, char *new_report, char **report, int isnext)
+{
+	json_object *json_obj, *json_array, *json_string;
+	struct failed_reports *retreport = NULL;
+	char *msgout = NULL;
+	int j = 0;
+
+	json_obj = json_object_new_object();
+	json_array = json_object_new_array();
+	json_object_object_add(json_obj,"Report", json_array);
+
+	if(list_empty(profile->failed_reports))
+		goto new_report;
+
+	list_for_each_entry(retreport, profile->failed_reports, list) {
+		if(!j && isnext) {
+			j = 1;
+			continue;
+		}
+		json_string = json_tokener_parse(retreport->freport);
+		json_object_array_add(json_array, json_string);
+	}
+
+new_report :
+	if(new_report) {
+		json_string = json_tokener_parse(new_report);
+		json_object_array_add(json_array, json_string);
+	}
+
+	msgout = (char *)json_object_to_json_string_ext(json_obj, JSON_C_TO_STRING_PRETTY);
+	*report = strdup(msgout);
+	json_object_put(json_obj);
+}
+
+static void create_report_json(char *new_report, char **report)
+{
+	json_object *json_obj, *json_array, *json_string;
+	char *msgout = NULL;
+
+	json_obj = json_object_new_object();
+	json_array = json_object_new_array();
+	json_object_object_add(json_obj,"Report", json_array);
+
+	if(new_report) {
+		json_string = json_tokener_parse(new_report);
+		json_object_array_add(json_array, json_string);
+	}
+
+	msgout = (char *)json_object_to_json_string_ext(json_obj, JSON_C_TO_STRING_PRETTY);
+	*report = strdup(msgout);
+	json_object_put(json_obj);
+}
+
+int create_json_bulkdata_report(struct profile *profile, char **report)
+{
+	/*
+	 * create json msg of current report
+	 * parse failed reports list and add it to the report
+	 * then add new report to the report
+	 */
+	char *msgout;
+
+	profile->new_report = NULL;
+	if(strcmp(profile->json_encoding_report_format, "objecthierarchy") == 0) {
+		create_json_bulkdata_report_object_hierarchy(profile, &msgout);
+	} else if(strcmp(profile->json_encoding_report_format, "namevaluepair") == 0) {
+		create_json_bulkdata_report_name_value_pair(profile, &msgout);
+	}
+
+	if(profile->nbre_of_retained_failed_reports != 0) {
+		if(profile->nbre_failed_reports >= profile->nbre_of_retained_failed_reports && profile->nbre_of_retained_failed_reports > 0)
+			add_failed_reports_to_report_json(profile, msgout, report, 1);
+		else
+			add_failed_reports_to_report_json(profile, msgout, report, 0);
+	} else {
+		create_report_json(msgout, report);
+	}
+
+	append_string_to_string(msgout, &profile->new_report);
+	FREE(msgout);
+	return 0;
+}
+
+int create_csv_bulkdata_report(struct profile *profile, char **report)
+{
+	/*
+	 * create csv msg of current report
+	 * parse failed reports list and add it to the report
+	 */
+	int i;
+	struct resultsnode *p;
+	char *str1 = NULL, *str2 = NULL, *str = NULL, *paramprofilename, *timestamp = NULL, *type = NULL, rowseparator = '\0', separator = '\0';
+
+	if(strcmp(profile->csv_encoding_row_separator, "&#10;") == 0)
+		rowseparator = '\n';
+	else if(strcmp(profile->csv_encoding_row_separator, "&#13;") == 0)
+		rowseparator = '\r';
+
+	if(profile->csv_encoding_field_separator)
+		separator = profile->csv_encoding_field_separator[0];
+
+	get_time_stamp(profile->csv_encoding_row_time_stamp, &timestamp);
+	/*
+	 * Create header ReportTimestamp,ParameterName,ParameterValue,ParameterType in case of ParameterPerRow
+	 */
+	if(strcmp(profile->csv_encoding_report_format, "row") == 0) {
+		if(timestamp == NULL)
+			asprintf(&str, "ParameterName%cParameterValue%cParameterType%c", separator, separator, rowseparator);
+		else
+			asprintf(&str, "ReportTimestamp%cParameterName%cParameterValue%cParameterType%c", separator, separator, separator, rowseparator);
+		append_string_to_string(str, report);
+		FREE(str);
+		if(profile->nbre_of_retained_failed_reports != 0) {
+			if(profile->nbre_failed_reports >= profile->nbre_of_retained_failed_reports && profile->nbre_of_retained_failed_reports > 0)
+				add_failed_reports_to_report_csv(profile, report, 1);
+			else
+				add_failed_reports_to_report_csv(profile, report, 0);
+		}
+	}
+	if(strcmp(profile->csv_encoding_report_format, "column") == 0 && timestamp != NULL) {
+		if(profile->nbre_of_retained_failed_reports != 0) {
+			if(profile->nbre_failed_reports >= profile->nbre_of_retained_failed_reports && profile->nbre_of_retained_failed_reports > 0)
+				add_failed_reports_to_report_csv(profile, report, 1);
+			else
+				add_failed_reports_to_report_csv(profile, report, 0);
+		}
+		append_string_to_string("ReportTimestamp", &str1);
+		append_string_to_string(timestamp, &str2);
+	}
+
+	/*
+	 * Add New reports
+	 */
+	profile->new_report = NULL;
+	for(i = 0; i < profile->profile_parameter_number; i++) {
+		LIST_HEAD(results_list);
+		bulkdata_get_value_results(profile->profile_parameter[i].reference, &results_list);
+		list_for_each_entry(p, &results_list, list) {
+			paramprofilename = get_bulkdata_profile_parameter_name(profile->profile_parameter[i].reference, profile->profile_parameter[i].name, p->name);
+			if(strcmp(profile->csv_encoding_report_format, "row") == 0) {
+				type = strstr(p->type, ":");
+				if(timestamp == NULL)
+					asprintf(&str, "%s%c%s%c%s%c", paramprofilename, separator, p->data, separator, type+1, rowseparator);
+				else
+					asprintf(&str, "%s%c%s%c%s%c%s%c", timestamp, separator, paramprofilename, separator, p->data, separator, type+1, rowseparator);
+				append_string_to_string(str, report);
+				append_string_to_string(str, &profile->new_report);
+				FREE(str);
+			} else if(strcmp(profile->csv_encoding_report_format, "column") == 0) {
+				if(str1 == NULL || strlen(str1) <= 0)
+					asprintf(&str, "%s", paramprofilename);
+				else
+					asprintf(&str, "%c%s", separator, paramprofilename);
+				append_string_to_string(str, &str1);
+				FREE(str);
+				if(str2 == NULL || strlen(str2) <= 0)
+					asprintf(&str, "%s", p->data);
+				else
+					asprintf(&str, "%c%s", separator, p->data);
+				append_string_to_string(str, &str2);
+				FREE(str);
+			}
+			FREE(paramprofilename);
+		}
+		bulkdata_free_data_from_list(&results_list);
+	}
+	if(strcmp(profile->csv_encoding_report_format, "column") == 0) {
+		asprintf(&str, "%c", rowseparator);
+		append_string_to_string(str, &str1);
+		append_string_to_string(str, &str2);
+		append_string_to_string(str1, report);
+		append_string_to_string(str2, report);
+		append_string_to_string(str1, &profile->new_report);
+		append_string_to_string(str2, &profile->new_report);
+	}
+	FREE(str);
+	FREE(str1);
+	FREE(str2);
+	FREE(timestamp);
+	return 0;
+}
+
+static void create_json_failed_report(struct profile *profile, char **report)
+{
+	add_failed_reports_to_report_json(profile, NULL, report, 0);
+}
+
+static void create_csv_failed_report(struct profile *profile, char **report)
+{
+	char rowseparator = '\0', separator = '\0', *timestamp = NULL;
+
+	if(strcmp(profile->csv_encoding_row_separator, "&#10;") == 0) {
+		rowseparator = '\n';
+	} else if(strcmp(profile->csv_encoding_row_separator, "&#13;") == 0) {
+		rowseparator = '\r';
+	}
+
+	if(profile->csv_encoding_field_separator)
+		separator = profile->csv_encoding_field_separator[0];
+
+	get_time_stamp(profile->csv_encoding_row_time_stamp, &timestamp);
+	if(strcmp(profile->csv_encoding_report_format, "row") == 0) {
+		if(timestamp == NULL)
+			asprintf(report, "ParameterName%cParameterValue%cParameterType%c", separator, separator, rowseparator);
+		else
+			asprintf(report, "ReportTimestamp%cParameterName%cParameterValue%cParameterType%c", separator, separator, separator, rowseparator);
+	}
+	add_failed_reports_to_report_csv(profile, report, 0);
+}
+
+void create_encoding_bulkdata_report(struct profile *profile, char **report)
+{
+	if(strcasecmp(profile->encoding_type, "json") == 0) {
+		create_json_bulkdata_report(profile, report);
+	} else if(strcasecmp(profile->encoding_type, "csv") == 0) {
+		create_csv_bulkdata_report(profile, report);
+	}
+}
+
+void create_failed_report(struct profile *profile, char **report)
+{
+	if(strcasecmp(profile->encoding_type, "json") == 0) {
+		create_json_failed_report(profile, report);
+	} else if(strcasecmp(profile->encoding_type, "csv") == 0) {
+		create_csv_failed_report(profile, report);
+	}
+}

bulkdata/src/report.h

@@ -0,0 +1,24 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*		Author: Omar Kallel <omar.kallel@pivasoftware.com>
+*
+*/
+
+#ifndef __REPORT_H_
+#define __REPORT_H_
+
+#include <json-c/json.h>
+#include "common.h"
+#include "times.h"
+#include "config.h"
+
+void create_encoding_bulkdata_report(struct profile *profile, char **report);
+void create_failed_report(struct profile *profile, char **report);
+
+#endif /* __REPORT_H_ */

bulkdata/src/times.c

@@ -0,0 +1,62 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+
+#include "times.h"
+
+const char *bulkdata_get_time(void)
+{
+	static char local_time[64];
+
+	time_t t_time = time(NULL);
+	struct tm *t_tm = localtime(&t_time);
+	if (t_tm == NULL)
+		return NULL;
+
+	if (strftime(local_time, sizeof(local_time),"Date: %a, %d %b %Y %X%z GMT", t_tm) == 0)
+		return NULL;
+
+	return local_time;
+}
+
+void get_time_stamp(const char *format, char **timestamp)
+{
+	time_t now = time(NULL);
+
+	if (strcmp(format, "unix") == 0) {
+		asprintf(timestamp, "%ld", now);
+	} else if (strcmp(format, "iso8601") == 0) {
+		char buf[32] = {0};
+		struct tm *ts = localtime(&now);
+		strftime(buf, sizeof(buf), "%Y-%m-%dT%H:%M:%S%Z", ts);
+		asprintf(timestamp, "%s", buf);
+	} else
+		timestamp = NULL;
+}
+
+unsigned int get_next_period(time_t time_reference, int reporting_interval)
+{
+	unsigned int next_period;
+	time_t now = time(NULL);
+
+	if (now > time_reference)
+		next_period = reporting_interval - ((now - time_reference) % reporting_interval);
+	else
+		next_period = (time_reference - now) % reporting_interval;
+
+	if (next_period == 0)
+		next_period = reporting_interval;
+
+	return next_period;
+}

bulkdata/src/times.h

@@ -0,0 +1,19 @@
+/*
+*	This program is free software: you can redistribute it and/or modify
+*	it under the terms of the GNU General Public License as published by
+*	the Free Software Foundation, either version 2 of the License, or
+*	(at your option) any later version.
+*
+*	Copyright (C) 2020 iopsys Software Solutions AB
+*		Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
+*
+*/
+
+#ifndef __TIMES_H
+#define __TIMES_H
+
+const char *bulkdata_get_time(void);
+void get_time_stamp(const char *format, char **timestamp);
+unsigned int get_next_period(time_t time_reference, int reporting_interval);
+
+#endif /* __TIMES_H */

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

crashlog/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dectmngr
-PKG_RELEASE:=3
-PKG_VERSION:=3.5.7
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=83f89a83cf860bbcf2b7f2e030215db315a5bbbf
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
- 	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
-endef
-
-define Package/$(PKG_NAME)/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +0,0 @@
-config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -1,100 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-NAME=dectmngr
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
-
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME 
-		sleep 1
-	done
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-	local rxtun=
-
-	test $(db get hw.board.hasDect) = "0" && return
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
-
-	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
-
-	procd_open_instance
-	if [ "$log_dect_cmbs" = "none" ]; then
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command $PROG -comname ttyH0 $opt_ext
-		rm -f $LOG_PATH/*
-	elif [ "$log_dect_cmbs" = "file" ]; then
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
-	else
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
-		rm -f $LOG_PATH/*
-	fi
-
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	test $(db get hw.board.hasDect) = "0" && return
-
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	ubus call dect reload
-}
-
-service_triggers()
-{
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
-}
-
-boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}
-

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dectmngr2/Makefile

@@ -0,0 +1,56 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.3.0
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=2c8990fd5275d469e8ab6c7a99e17fe0a56052ea
+PKG_NAME:=dectmngr2
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus +libpicoevent endptmngr
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	$(INSTALL_DIR) $(1)/etc/uci-defaults/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+
+# Workaround for product DG400 which has an
+# incorrect value in nvram from factory.
+
+if [ -e "/proc/nvram/BoardId" ]; then
+	boardid=$(cat /proc/nvram/BoardId)
+	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
+
+	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
+		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
+
+		db -q batch <<-EOT
+			set hw.board.has_dect=1
+			commit hw.board
+		EOT
+	fi
+fi
+
+
+exit 0
+

dslmngr/Makefile

@@ -8,15 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.0
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
+PKG_SOURCE_VERSION:=400cc66081f2b10b481d5a745bc505b78af098bd
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -26,8 +25,14 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -38,7 +43,7 @@ define Package/dslmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
+  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/dslmngr/description
@@ -68,10 +73,6 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,48 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
-
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	local HASADSL="$(db -q get hw.board.hasAdsl)"
-	local HASVDSL="$(db -q get hw.board.hasVdsl)"
-	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
-
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}
-

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
 endef
 
 define Package/easy-qos/description
@@ -39,7 +39,11 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;

easy-soc-events/Makefile

@@ -11,7 +11,6 @@ PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
 PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
@@ -19,7 +18,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +84,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,23 @@
+if (PACKAGE_libwifi || PACKAGE_libdsl || PACKAGE_libethernet)
+menu "configurations"
+
+config IOP_LLA_LIBS_DEBUG
+	bool "Enable debugging support"
+	default n
+
+config LIBWIFI_DEBUG
+	depends on PACKAGE_libwifi
+	bool "Enable wifi debugging"
+	default n
+
+config LIBDSL_DEBUG
+	depends on PACKAGE_libdsl
+	bool "Enable xdsl debugging"
+	default n
+
+config LIBDSL_TEST
+	depends on PACKAGE_libdsl
+	bool "Libdsl test program"
+	default n
+endmenu
+endif

easy-soc-libs/Makefile

@@ -7,17 +7,16 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=7.2.26
+PKG_VERSION:=6.0.2
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=350793b45873480d8981dac540c4145705a7b7ba
+PKG_SOURCE_VERSION:=fee575f414324c68d0916fab06d10eccb78541fd
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 endif
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
@@ -30,77 +29,75 @@ include $(INCLUDE_DIR)/package.mk
 define Package/easy-soc-libs
   SECTION:=libs
   CATEGORY:=Libraries
-  TITLE:=IOPSYS Easy SoC libraries
-  SUBMENU:=IOPSYS Easy SoC libraries
+  TITLE:=IOPSYS easy SoC libraries
+  SUBMENU:=IOPSYS easy SoC libraries
   DEPENDS:=+libopenssl
   MENU:=1
 endef
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+define Package/libwifi/config
+  source "$(SOURCE)/Config.in"
+endef
+
+define Package/libeasy
+  $(call Package/easy-soc-libs)
+  TITLE:= Common helper functions library (libeasy)
+  DEPENDS+=+libnl +libnl-route
+endef
+
+define Package/libwifi
+  $(call Package/easy-soc-libs)
+  TITLE:= WiFi library (libwifi)
+  DEPENDS+=+libnl +libnl-route +libeasy
+endef
+
+define Package/libethernet
+  $(call Package/easy-soc-libs)
+  TITLE:= Ethernet library (libethernet)
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
+endef
+
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+  TARGET_CFLAGS +=-DIOPSYS_MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
+  TARGET_CFLAGS +=-DIOPSYS_INTEL
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MEDIATEK MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
-else ifeq ($(CONFIG_TARGET_ipq95xx),y)
-  TARGET_PLATFORM=IPQ95XX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-  TARGET_PLATFORM=LINUX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_LINUX
 else
-  $(info Unexpected CONFIG_TARGET, use default MAC80211)
-  TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
+  $(info Unexpected CONFIG_TARGET)
 endif
 
+export TARGET_PLATFORM
+
+ifdef CONFIG_IOP_LLA_LIBS_DEBUG
+  TARGET_CFLAGS += -DIOP_LLA_LIBS_DEBUG
+endif
+
+define Package/libdsl
+  $(call Package/easy-soc-libs)
+  TITLE:= XDSL library (libdsl)
+  DEPENDS+=+TARGET_intel_mips:dsl-cpe-api-vrx +TARGET_intel_mips:dsl-cpe-fapi +TARGET_intel_mips:kmod-ppa-drv
+endef
+
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-ifneq ($(CONFIG_PACKAGE_libwifi),)
-TARGET_CFLAGS +=-DHAS_WIFI
-endif
-
-esl-pkgs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-esl-pkgs-all := \
-	libeasy \
-	libwifiutils \
-	libwifi \
-	libdsl \
-	libethernet \
-	libqos
-
-ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
-  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
-endif
+	$(if $(CONFIG_PACKAGE_libethernet),libethernet)
 
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
@@ -112,7 +109,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)
@@ -121,36 +117,79 @@ define Build/Prepare
 endef
 endif
 
-include easy.mk
-include wifi.mk
-include dsl.mk
-include ethernet.mk
-include qos.mk
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
-	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
-define Build/Compile/rebuild
-	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
-	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
-		rm -f $(PKG_BUILD_DIR)/.config_*)
+define Build/InstallDev/libeasy
+	$(INSTALL_DIR) $(1)/usr/include/easy
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
 endef
-endif
 
-STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
+define Build/InstallDev/libwifi
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libdsl
+	$(INSTALL_DIR) $(1)/usr/include/xdsl
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+endef
+
+define Build/InstallDev/libethernet
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
+endef
 
 define Build/Compile
-	$(Build/Compile/rebuild)
-	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
 	$(call Build/Compile/Default)
-	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
+endif
 endef
 
 define Build/InstallDev
-	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+endef
+
+define Package/libeasy/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
+endef
+
+define Package/libwifi/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
+endef
+
+define Package/libethernet/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
+endef
+
+define Package/libdsl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
+ifeq ($(CONFIG_LIBDSL_TEST),y)
+	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
+endif
 endef
 
 define Package/easy-soc-libs/install
 	:
 endef
 
-$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))
+$(eval $(call BuildPackage,libeasy))
+$(eval $(call BuildPackage,libwifi))
+$(eval $(call BuildPackage,libdsl))
+$(eval $(call BuildPackage,libethernet))

easy-soc-libs/dsl.mk

@@ -1,44 +0,0 @@
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= xDSL library (libdsl)
-endef
-
-define Package/libdsl/config
-  if PACKAGE_libdsl
-	  config LIBDSL_DEBUG
-		depends on PACKAGE_libdsl
-		bool "Enable dsl debugging"
-		default n
-
-	  config LIBDSL_TEST
-		depends on PACKAGE_libdsl
-		bool "Enable dsl test program"
-		default n
-
-  endif
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include/xdsl
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-define Build/Compile/libdsl
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endef
-endif
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef

easy-soc-libs/easy.mk

@@ -1,25 +0,0 @@
-
-
-define Package/libeasy
-  $(call Package/easy-soc-libs)
-  TITLE:= Common helper functions library (libeasy)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Build/InstallDev/libeasy
-	$(INSTALL_DIR) $(1)/usr/include/easy
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-
-define Package/libeasy/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/ethernet.mk

@@ -1,27 +0,0 @@
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api
-endef
-
-define Package/libethernet/config
-  config LIBETHERNET_DEBUG
-	depends on PACKAGE_libethernet
-	bool "Enable ethernet debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/qos.mk

@@ -1,27 +0,0 @@
-
-define Package/libqos
-  $(call Package/easy-soc-libs)
-  TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Package/libqos/config
-  config LIBQOS_DEBUG
-	depends on PACKAGE_libqos
-	bool "Enable qos debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libqos
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
-endef
-
-define Package/libqos/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/wifi.mk

@@ -1,53 +0,0 @@
-
-define Package/libwifiutils
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi utility library (libwifiutils.so)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Build/InstallDev/libwifiutils
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifiutils/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
-endef
-
-define Package/libwifi/config
-  if PACKAGE_libwifi
-  	config LIBWIFI_DEBUG
-		depends on PACKAGE_libwifi
-		bool "Enable debugging in libwifi"
-		default n
-
-	config LIBWIFI_USE_CTRL_IFACE
-		bool "Create UNIX sockets to interface with hostapd/wpa_supplicant"
-		default n
-  endif
-endef
-
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef

endptmngr/Makefile

@@ -6,21 +6,26 @@
 #
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
+PKG_RELEASE:=1
+PKG_VERSION:=0.4
+PKG_SOURCE_VERSION:=d87c1def50d9672dbeb9d5972f36a364b29334b9
+PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=LICENSE
 
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=https://download.iopsys.eu/iopsys/opensdk/
+PKG_NAME:=endptmngr-open
+PATCH_DIR:=
+PKG_HASH:=skip
+else
+PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
+PKG_SOURCE_PROTO:=git
+PKG_NAME:=endptmngr
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+endif
+
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
@@ -28,9 +33,15 @@ PKG_BUILD_PARALLEL:=1
 
 # All config variable that are passed to the make invocation, directly or
 # indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
+PKG_CONFIG_DEPENDS := \
+	CONFIG_TARGET_BOARD
+
+export CONFIG_BRCM_SDK_VER_504001
+export CONFIG_BRCM_SDK_VER_504002
+export CONFIG_BRCM_SDK_VER_504003
+export CONFIG_BRCM_SDK_VER_504004
+export CONFIG_BRCM_SDK_VER_504005
 
-export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -40,28 +51,27 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Broadcom Voice Endpoint Manager
+  TITLE:=Brcmslic
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+  DEPENDS:= +libubox +ubus +libpicoevent +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
 endef
 
 define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
 endef
+
 endif
 
-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
 
 define Package/endptmngr/install
-	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/etc/init.d/endptmngr

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=endptmngr
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-	procd_open_instance
-	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_set_param nice -12
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger asterisk 
-}

ethmngr/Makefile

@@ -5,14 +5,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.0
+PKG_VERSION:=1.0.4
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
+PKG_SOURCE_VERSION:=b7135381aedf1bde6f7ab10b41be372a9bd7d155
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_LICENSE:=GPL-2.0-only
 PKG_LICENSE_FILES:=LICENSE
@@ -23,7 +22,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_iopsys_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,24 +36,10 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-define Build/Compile
-endef
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca),)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
-else
-	$(CP) ./files/linux/* $(1)/
-endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -1,208 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset -f switchmgr
-# alias for switchmgr
-switchmgr() {
-	"/userfs/bin/switchmgr" "$@"
-}
-
-unset -f tc3162_get_lan_port
-# get lan port port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_lan_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-
-	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
-	case "${ifname}" in
-	eth0.*)
-		;;
-	*)
-		logger -t "port-management" \
-		"unsupported - ${ifname} is not tc3162 switch port"
-		return 255
-		;;
-	esac
-
-	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
-	[[ -z "${if_idx}" ]] && return 255
-	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
-		logger -t "port-management" \
-		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
-		return 255
-	}
-	let "if_idx=${if_idx}-1"
-	return ${if_idx}
-}
-
-
-unset -f tc3162_get_mapped_port
-# get mapped switch port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_mapped_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-	local prtmap_procfile="/proc/tc3162/eth_portmap"
-	local lan_prt=255
-	local port=255
-	local prtmap_out_line_num=4
-	local prtmap_out_line=""
-	
-	# check "lan port map" marker in portmap output string
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
-
-	tc3162_get_lan_port "${ifname}"
-	let "if_idx=$?"
-	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
-
-	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
-	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-
-	# get and check lan port index from lan portmapping string
-	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
-	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
-
-	# get and check mapped port from lan portmapping string
-	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
-	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
-
-	return ${port}
-}
-
-unset -f get_max_port_speed
-# arg1: port ifname, ex: eth0.1
-get_max_port_speed() {
-	[[ -z "$1" ]] && { echo 0; return; }
-
-	local ifname="$1"
-	local port=255
-	local speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	# tc3162 capability for all ports is 1Gbps
-	speed=1000
-
-	echo $speed
-}
-
-unset -f power_updown
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-power_updown() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local port=255
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	switchmgr phy admin "${port}" "${enabled}"
-}
-
-unset -f set_port_settings
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: 0/1/off/on/..
-# arg6: port eee, ex: 0/1/off/on/..
-# arg7: port pause, ex: 0/1/off/on/..
-set_port_settings() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-	[[ -z "$3" ]] && return
-	[[ -z "$4" ]] && return
-	[[ -z "$5" ]] && return
-	[[ -z "$6" ]] && return
-	[[ -z "$7" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local speed="$3"
-	local duplex="$4"
-	local autoneg=$5
-	local eee="$6"
-	local pause="$7"
-	local port=255
-	local speedmode=1
-	local last_speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-	
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	let "autoneg=$(get_bool "${autoneg}" "-1")"
-	[[ ${autoneg} -eq -1 ]] && return
-
-	let "eee=$(get_bool "${eee}" "-1")"
-	[[ ${eee} -eq -1 ]] && return
-	
-	let "pause=$(get_bool "${pause}" "-1")"
-	[[ ${pause} -eq -1 ]] && return
-	
-	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
-	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-	
-	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
-	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
-		&& last_speed=${speed}
-	
-	switchmgr phy pause "${port}" "${pause}"
-
-	# set speedmode: speed+duplex+autoneg
-# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
-	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
-		switchmgr phy speedmode ${port} "1"
-	else
-		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
-		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
-		switchmgr phy speedmode "${port}" "${speedmode}"
-	fi
-	
-# TODO: implement MAC control register manipulations (mapped ports used) for
-	# eee settings change
-	# separate (tx/rx) pause (flow control) settings change
-	# set speed to 1Gbps separately from autoneg mode
-	
-# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
-	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
-
-	power_updown "${ifname}" ${enabled}
-
-}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -1,140 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
-	local speed=1000
-
-	case "$phycap" in
-		10GFD) speed=10000 ;;
-		5GFD) speed=5000 ;;
-		2.5GFD) speed=2500 ;;
-		1GFD|1GHD) speed=1000 ;;
-		100MFD|100MHD) speed=100 ;;
-		10MFD|10MHD) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port name, ex: eth0
-get_port_number() {
-	[ -z "$1" ] && return
-	local ports="0 1 2 3 4 5 6 7 8"
-	local units="0 1"
-	local port="$1"
-	local ifname
-
-	for unit in $units; do
-		for prt in $ports; do
-			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
-			if [ "$ifname" == "$port" ]; then
-				echo "$unit $prt"
-				return
-			fi
-		done
-	done
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ethctl $ifname phy-power $updown >/dev/null
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	local unitport="$(get_port_number $ifname)"
-	local unit=$(echo $unitport | cut -d ' ' -f 1)
-	local port=$(echo $unitport | cut -d ' ' -f 2)
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	[ "$duplex" == "half" ] && duplex=0 || duplex=1
-	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
-	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
-
-	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
-	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
-	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
-	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
-
-	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
-	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
-
-	if [ "$numofcaps" == "1" ]; then
-		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
-	else
-		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
-		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
-	fi
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-	if [ "$auto" == "on" ]; then
-		# Use ethswctl utility to set pause autoneg
-		# as ethtool is not setting it properly
-		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
-	else
-		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-	fi
-
-	power_updown $ifname $enabled
-}

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-populate_config_from_db() {
-	. /lib/functions.sh
-	. /lib/network/utils.sh
-	include /lib/ethernet
-
-	portorder="$(db -q get hw.board.ethernetPortOrder)"
-	for port in $portorder; do
-		speed="$(get_max_port_speed $port 2>/dev/null)"
-		speed="${speed:-1000}"
-
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$(get_port_name $port)"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$(get_port_name $port)"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-
-	uci commit ports
-}
-
-populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
-		[ -n "$port" ] || continue
-		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
-		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$PORT"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$PORT"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$port" = "wan" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-	uci commit ports
-}
-
-if [ -s "/etc/config/ports" ]; then
-	if uci -q get ports.@ethport[0] >/dev/null; then
-		# exit if there is any valid content
-		exit 0
-	else
-		rm -f /etc/config/ports
-	fi
-fi
-
-touch /etc/config/ports
-
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
-	populate_config_from_db
-elif [ -d /proc/device-tree/ ]; then
-	populate_config_from_device_tree
-fi

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -1,95 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
-	local speed=1000
-
-	case "$phycap" in
-		10000*) speed=10000 ;;
-		5000*) speed=5000 ;;
-		2500*) speed=2500 ;;
-		1000*) speed=1000 ;;
-		100*) speed=100 ;;
-		10*) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ip link set dev $ifname $updown
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-
-	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-
-	power_updown $ifname $enabled
-}

evoice/Makefile

@@ -1,106 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,334 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,181 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,56 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

fdtextract/Makefile

@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

gryphon-led-module/Makefile

@@ -28,7 +28,6 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,33 +40,6 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
-
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -43,18 +43,12 @@
 static ssize_t get_led_color(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	/* [ln] todo: dummy implementation */
 	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
 
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
+	len = sprintf(buf, "%d\n", 123);
 	if (len <= 0) {
 		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
 	}
 
 	return len;
@@ -105,69 +99,8 @@ static ssize_t set_led_color(struct device *dev,
 }
 static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
 
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
 static struct attribute *sk9822_dev_attrs[] = {
 	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
 	 NULL
 };
 
@@ -220,6 +153,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	}
 
@@ -227,6 +161,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
@@ -244,6 +179,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	}
 
@@ -251,6 +187,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

icwmp/Config_cwmp.in

@@ -0,0 +1,27 @@
+if PACKAGE_icwmp
+
+config CWMP_SCRIPTS_FULL
+	bool "Install all icwmp scripts"
+	default y
+
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+
+endif
+

icwmp/Makefile

@@ -1,73 +1,53 @@
 #
-# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.19
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=6.3.2-2020-12-21
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=9d8389cda16f410826920bb27fd8af4d28c79de9
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=495e905c30ac7423035a8c0c2c67effc0c607475
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbf_api
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl +libbbfdm  +libbbf_api
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  VARIANT:=openssl
+define Package/$(PKG_NAME)/description
+ A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp-openssl
-  VARIANT:=wolfssl
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  CONFLICTS := icwmp-openssl icwmp-wolfssl
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -75,34 +55,76 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifneq ($(CWMP_REVISION)_,_)
+ifneq ($(CWMP_REVISION),exported)
+ifneq ($(CWMP_REVISION),Unversioned directory)
+TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+endif
+endif
+endif
+
+TARGET_LDFLAGS += \
+	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
+
+CONFIGURE_ARGS += \
+	--with-uci-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubus-include-path=$(STAGING_DIR)/usr/include
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libcwmpdm.so $(1)/usr/lib/bbfdm/libcwmpdm.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
-	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
-	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
-	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
+	$(CP) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin
+ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
+	$(INSTALL_DIR) $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+endif
+	$(CP) ./files/* $(1)/
 endef
 
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
+define Package/$(PKG_NAME)/postinst
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Enabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd enable
+	fi
+	exit 0
+endef
 
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+define Package/$(PKG_NAME)/prerm
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Disabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd disable
+	fi
+	exit 0
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -1,9 +1,11 @@
 config acs 'acs'
+	option url ''
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option periodic_inform_enable 'true'
 	option periodic_inform_interval '1800'
-	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option periodic_inform_time '0'
+	option ParameterKey ''
 	option dhcp_discovery 'enable'
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
@@ -11,15 +13,15 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
+	option https_ssl_capath ''
 	option ipv6_enable '0'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
+	option interface 'eth0.1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
-	option log_to_file 'disable'
+	option log_to_file 'enable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'
@@ -28,17 +30,17 @@ config cpe 'cpe'
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option port '7547'
+	option ubus_socket '/var/run/ubus.sock'
 	option provisioning_code ''
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
+	option datamodel 'tr181'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
-	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
 	
 config lwn 'lwn'
 	option enable '1'

icwmp/files/etc/firewall.cwmp

@@ -1,80 +1,21 @@
-#!/bin/sh
-
-#created by the icwmp package
-log() {
-	echo "${@}"|logger -t firewall.cwmp -p info
-}
-
-if [ ! -f "/var/state/cwmp" ]; then
-	exit 0;
-fi
-
-zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
-port=$(uci -q get cwmp.cpe.port)
-ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
-
-if [ -z "${zone_name}" ]; then
-	log "empty firewall zone name"
+#created by the icwmp package 
+zone_name=""
+port=""
+if [ "$zone_name" = "" ]; then
 	exit 0
 elif [ "$zone_name" = "icwmp" ]; then
 	iptables -nL zone_icwmp_input 2> /dev/null
-	if [ "$?" != 0 ]; then
-		iptables -w 1 -N zone_icwmp_input
-		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
+	if [ $? != 0 ]; then
+		iptables -N zone_icwmp_input
+		iptables -t filter -A INPUT -j zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	else			
-		iptables -w 1 -F zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
+		iptables -F zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	fi			
 else
-	iptables -w 1 -F zone_icwmp_input 2> /dev/null
-	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
-	iptables -w 1 -X zone_icwmp_input 2> /dev/null
+	iptables -F zone_icwmp_input 2> /dev/null
+	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -X zone_icwmp_input 2> /dev/null
 fi
-
-cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
-cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
-
-# default incoming rule is Port only
-if [ -z "${incoming_rule}" ]; then
-	incoming_rule="port_only"
-fi
-
-if [ "${incoming_rule}" = "ip_only" ]; then
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-elif [ "${incoming_rule}" = "port_only" ]; then
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-else
-	if [ -n "${ipaddr}" ]; then
-		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
-	fi
-
-	if [ -n "${port}" ]; then
-		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
-	fi
-fi
-
-echo "${cmd}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd}
-fi
-
-echo "${cmd6}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd6}
-fi
-
-uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit cwmp
+#iptables -I FW_ZONE -p tcp -s ACS_ADDRESS --dport PORT -j ACCEPT --comment "Open ACS port"

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -0,0 +1,87 @@
+#!/bin/sh
+
+. /lib/functions/network.sh
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+[ -f /etc/config/cwmp ] || exit 0
+
+handle_icwmp_restart() {
+	[ -f /tmp/switching_mode ] && exit 0
+	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
+
+	[ "$INTERFACE" == "loopback" ] && exit 0
+
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0
+
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0
+
+	local ifname="$(uci -q get network.$INTERFACE.ifname)"
+	[ "${ifname:0:1}" == "@" ] && exit 0
+
+	mkdir -p /tmp/ipv4
+
+	network_flush_cache
+
+	local previpaddr=""
+	local curipaddr=""
+	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+	previpaddr=$(cat $ipaddrfile 2>/dev/null)
+	network_get_ipaddr curipaddr $INTERFACE
+	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+	local prevgateway=""
+	local curgateway=""
+	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+	prevgateway=$(cat $gatewayfile 2>/dev/null)
+	network_get_gateway curgateway $INTERFACE
+	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+	local prevsubnets=""
+	local cursubnets=""
+	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+	prevsubnets=$(cat $subnetsfile 2>/dev/null)
+	network_get_subnets cursubnets $INTERFACE
+	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+	local prevdnsservers=""
+	local curdnsservers=""
+	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
+	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
+	network_get_dnsserver curdnsservers $INTERFACE
+	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
+
+	local prevdev=""
+	local curdev=""
+	local devfile=/tmp/ipv4/$INTERFACE-dev
+	prevdev=$(cat $devfile 2>/dev/null)
+	network_get_device curdev $INTERFACE
+	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
+
+	local prevopt43url=""
+	local curopt43url=""
+	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
+	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
+	curopt43url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
+	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
+
+	[ \
+		"$prevdev" == "$curdev" -a \
+		"$previpaddr" = "$curipaddr" -a \
+		"$prevgateway" = "$curgateway" -a \
+		"$prevsubnets" = "$cursubnets" -a \
+		"$prevdnsservers" = "$curdnsservers" \
+	] && {
+		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
+		[ -z "$prevopt43url" ] && exit 0
+	}
+
+	/etc/init.d/icwmpd reload &
+}
+
+handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -1,32 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-log() {
-	echo "$@" |logger -t cwmp.update -p info
-}
-
-handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
-
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
-
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
-
-	if [ "$ret" = "true" ]; then
-		# read status from var/state/cwmp
-		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
-		if [ "$status" != "running" ]; then
-			log "Trigger out of bound inform, since last inform status was failure"
-			ubus -t 10 call tr069 inform >/dev/null 2>&1
-		fi
-	else
-		log "Restarting icwmp tr069 object"
-		/etc/init.d/icwmpd restart
-	fi
-}
-
-handle_icwmp_update "$@"

icwmp/files/etc/init.d/icwmpd

@@ -1,268 +1,126 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
+. /lib/functions.sh
+include /lib/network
+. /usr/share/libubox/jshn.sh
+
 START=99
-STOP=00
+STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-include /lib/network
+EXTRA_COMMANDS="notify"
+EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
 
-log() {
-	echo "${@}"|logger -t cwmp.init -p info
+validate_url() {
+	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
+	# Example: SCHEMA_LIST="http https"
+	SCHEMA_LIST="http"
+
+	for schema in $SCHEMA_LIST;	do
+		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
+		if [ "_$dest" != "_" ]; then
+			return 0
+		fi
+	done
+	return 1
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
+get_acs_url() {
+	local default_acs="http://10.10.1.6:8000/openacs/acs"
+	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
+	local url="$(uci -q get cwmp.acs.url)"
+	local dhcp_url="$(uci -P /var/state -q get cwmp.acs.dhcp_url)"
 
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
-
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls "${cert_dir}"/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
+		url="$dhcp_url"
+		echo "ACS URL from DHCP server: $url"
+		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
+	elif [ -n "$url" ];then
+		url="$(uci -q get cwmp.acs.url)"
+		echo "ACS URL from configuration: $url"
+	else
+		url="$default_acs"
+		echo "Using default ACS URL: $url"
+		[ -n "$url" ] && uci -P /var/state -q set cwmp.acs.url="$url"
 	fi
 
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls "${cert_dir}"/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+	validate_url "$url"
+	if [ "$?" != "0" ];then
+		echo "Invalid ACS URL: $url"
+		exit 1
 	fi
 }
 
 enable_dhcp_option43() {
-	local wan="${1}"
+	local wan=$1
+	local discovery=0
+	case $2 in
+		enable|1) discovery=1 ;;
+	esac
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
+	local enabled
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
 	for ropt in $reqopts; do
 		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
 		esac
 	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ $proto == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
+	########################################################
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
+wait_for_option43() {
+	local time=$1
+	local default_wan_interface dhcp_discovery url
 
-	echo "${val}"
-}
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get url acs url
 
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
+	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
 
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
+	local tm=0
 
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ "${oui_len}" -eq 0 ] || [ "${serial_len}" -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ "${class_len}" -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ "${class_len}" -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network."${intf}".sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp."${intf}".dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp."${lan}".dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp."${lan}".dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
+	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
+	then
+		echo "Waiting for discovery of ACS URL from dhcp server ..."
+		while [ $tm -le $time ]
+		do
+			acs_url=`uci -P /var/state -q get cwmp.acs.dhcp_url`
+			if [ "$acs_url" != "" ]
+			then
 				break
+			else
+				sleep 1
 			fi
+			tm=$((tm+1))
 		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		fi
-	fi
-}
-
-enable_dhcp_option125() {
-	local wan="${1}"
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local sendopts="$(uci -q get network."${wan}".sendopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" = "dhcp" ]; then
-		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
-			uci -q set network."${wan}".reqopts="$newreqopts"
-			network_uci_update=1
-		fi
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "${sendopts}" "${wan}" "network"
-			network_uci_update=1
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
 	fi
 }
 
@@ -273,233 +131,67 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f "$resolvfile" ]; do
+	while [ ! -f $resolvfile ]; do
 		sleep 1
-		[ "$tm" -ge "$time" ] && break
+		[ $tm -ge $time ] && break
 		tm=$((tm+1))
 	done
 }
 
-copy_cwmp_etc_files_to_varstate() {
-	mkdir -p /var/run/icwmpd
+set_wan_interface() {
+	local l3_device=""
+	local default_wan_interface=""
 
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	json_load "$(ifstatus $default_wan_interface)"
+	json_get_var l3_device l3_device
+	if [ "$l3_device" != "" ];then
+		uci -q set cwmp.cpe.interface="$l3_device"
+		uci -q commit cwmp
 	fi
-
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
-	fi
-}
-
-copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
-	fi
-
-	# move the successful custom notify import marker to persistent storage
-	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
-		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string' \
-		'dhcp_discovery:string' \
-		'dhcp_url:string' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'ipv6_enable:bool' \
-		'ssl_capath:string'
-
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'enable:bool' \
-		'periodic_notify_interval:uinteger'
-}
-
-validate_defaults() {
-	local ssl_capath
-	config_load cwmp
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-
-	ssl_capath="${ssl_capath%/}"
-	# Put the cert pem file in keep list
-	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
-			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
-		fi
-	fi
-
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-
-	return 0;
-}
-
-boot() {
-	local enable_cwmp="0"
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
-	fi
-
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get wan_interface cpe default_wan_interface "wan"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-		# Set dhcp option 60
-		set_vendor_id "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_dhcp_option125 "${wan_interface}"
-		enable_dnsmasq_option125 "${lan_interface}"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	# Copy backup data so that if it restart latter on, it gets the info
-	copy_cwmp_etc_files_to_varstate
-	mkdir -p /var/run/icwmpd/
-	touch /var/run/icwmpd/cwmp
-
-	start
 }
 
 start_service() {
-	local enable_cwmp
+	if [ ! -f /tmp/.icwmpd_boot ]; then
+		touch /etc/icwmpd/.icwmpd_boot
+		touch /tmp/.icwmpd_boot
+	else
+		[ -f /sbin/netifd ] && echo "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+		[ -f /etc/config/wireless ] && echo "Waiting for WiFi to be started ..." && ubus -t 5 wait_for network.wireless
+		[ -f /usr/sbin/dnsmasq ] && echo "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+		[ -f /etc/config/dhcp ] && echo "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+		[ -f /usr/sbin/asterisk ] && echo "Waiting for Voice to be started ..." && ubus -t 5 wait_for asterisk
 
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
+		config_load cwmp
+		set_wan_interface
+		wait_for_option43 20
+		get_acs_url
 
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
+		procd_open_instance
+		procd_set_param command "$PROG"
+		if [ "$1" = "GetRPCMethods" ];then
+			procd_append_param command -g
+		elif [ -f /etc/icwmpd/.icwmpd_boot ]; then
+			procd_append_param command -b
+		fi
+		procd_set_param respawn "3" "7" "0"
+		procd_close_instance
+		#procd_open_instance
+		#[ "$(uci -q get cwmp.cpe.notification)" == "1" ] && procd_append_param command "/usr/sbin/icwmp_notifd"
+		#procd_close_instance
 	fi
-
-	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-
-	validate_defaults || {
-		log "Validation of defaults failed"
-		return 1;
-	}
-
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	procd_append_param command -b
-	procd_set_param respawn \
-		"${respawn_threshold:-5}" \
-		"${respawn_timeout:-10}" "${respawn_retry:-3}"
-
-	procd_set_param watch network.interface
-	procd_close_instance
-}
-
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	local ret
+	stop
+	start
+}
 
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so returning
-		return 0
-	fi
-
-	status="$(echo "${tr069_status}" | jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
-		log "Restarting CWMP client"
-		stop
-		start
-	fi
+notify() {
+       ubus -t 1 call tr069 notify >/dev/null 2>&1 & 
 }
 
 service_triggers() {
-       procd_add_reload_trigger "cwmp"
-
-       procd_open_trigger
-               json_add_array
-                       json_add_string "" "interface.update"
-                       json_add_array
-                               json_add_array
-                                       json_add_string "" "run_script"
-                                       json_add_string "" "/etc/icwmpd/update.sh"
-                               json_close_array
-                       json_close_array
-                       json_add_int "" "2000"
-               json_close_array
-       procd_close_trigger
+	procd_add_config_trigger "config.change" "cwmp"  /etc/init.d/icwmpd reload
 }