openvswitch feed package

ated/Makefile

@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2016 inteno
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=http://public.inteno.se:/ated
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bashdb/Makefile

@@ -13,9 +13,6 @@ PKG_MD5SUM:=b72c17870bfab2fd791b1f6de4d79f9e
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/$(PKG_NAME)

bbf/Config_bbfdm.in

@@ -1,35 +0,0 @@
-config BBF_VENDOR_EXTENSION
-	bool "Enable Vendor Extension"
-	default y
-
-config BBF_VENDOR_LIST
-	string "Vendor List"
-	default "iopsys"
-
-config BBF_VENDOR_PREFIX
-	string "Vendor Prefix"
-	default "X_IOPSYS_EU_"
-
-config BBF_TR104
-	bool "Enable TR-104 Data Model Support"
-	default y
-
-config BBF_TR143
-	bool "Enable TR-143 Data Model Support"
-	default y
-
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBFDM_ENABLE_JSON_PLUGIN
-	bool "Enable json plugin to extend datamodel"
-	default y
-
-config BBFDM_ENABLE_DOTSO_PLUGIN
-	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255

bbf/Makefile

@@ -1,213 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.49
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=87ae46df8b4e221b8894fd861d2eb785ae1f3bf3
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
-
-PKG_LICENSE:=LGPL-2.1
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/libbbf_api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api \
-	    +BBF_TR471:obudpst
-endef
-
-define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (internal)
-  VARIANT:=internal
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  CONFLICTS := libbbfdm-mbedtls
-  VARIANT:=openssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
-  VARIANT:=wolfssl
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
-endef
-
-define Package/libbbfdm/config
-	source "$(SOURCE)/Config_bbfdm.in"
-endef
-
-define Package/libbbf_api/description
- Library contains the API(UCI, UBUS, JSON, CLI and Browse) of libbbfdm
-endef
-
-define Package/libbbfdm/description
- Library contains the data model tree. It includes TR181, TR104 and TR143 data models
-endef
-
-USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
-ifneq ($(USE_LOCAL),)
-define Build/Prepare
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
-
-ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
-endif
-
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
-endif
-
-ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
-
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
-
-endif ##CONFIG_BBF_VENDOR_EXTENSION
-
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
-define Package/libbbf_api/install
-	$(INSTALL_DIR) $(1)/lib
-endef
-
-define Package/libbbfdm/default/install
-	$(INSTALL_DIR) $(1)/lib
-	$(INSTALL_DIR) $(1)/etc/bbfdm
-	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
-endef
-
-define Package/libbbfdm/default/prerm
-	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
-	exit 0
-endef
-
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
-	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,userinterface))
-$(eval $(call BuildPackage,libbbf_api))
-$(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -1,117 +0,0 @@
-{
-	"Device.UserInterface.": {
-		"type": "object",
-		"version": "2.0",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Device.UserInterface.RemoteAccess.": {
-			"type": "object",
-			"version": "2.0",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": false,
-			"array": false,
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "enable"
-							}
-						}
-					}
-				]
-			},
-			"Port": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"range": [
-					{
-						"max": 65535
-					}
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "port"
-							}
-						}
-					}
-				]
-			},
-			"SupportedProtocols": {
-				"type": "string",
-				"read": true,
-				"write": false,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"list": {
-					"datatype": "string",
-					"enumerations": [
-						"HTTP",
-						"HTTPS"
-					]
-				},
-				"default": "HTTP"
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "protocol"
-							}
-						}
-					}
-				]
-			}
-		}
-	}
-}

bbf/files/etc/config/userinterface

@@ -1,6 +0,0 @@
-config userinterface 'remote_access'
-	option enable '0'
-	option interface 'wan'
-	option port '80'
-	option protocol 'HTTP'
-

bbf/files/etc/firewall.userinterface

@@ -1,85 +0,0 @@
-#!/bin/sh
-
-
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-configure_firewall_rule() {
-	local enable port protocol gui_port
-	local zone interface
-
-	config_load userinterface
-	config_get_bool enable remote_access enable 1
-	config_get port remote_access port
-	config_get interface remote_access interface
-
-	if [ "${enable}" -eq "0" ] || [ -z "${port}" ] || [ -z "${interface}" ]; then
-		return 0;
-	fi
-
-	zone="zone_${interface}_input"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-
-	zone="zone_${interface}_output"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-}
-
-delete_firewall_rule() {
-	local zone interface
-	local CMD
-
-	config_load userinterface
-	config_get interface remote_access interface
-
-	# Clean remote interface rules
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	zone="zone_${interface}_input"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-
-	zone="zone_${interface}_output"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-}
-
-# Delete existing remote access rules
-delete_firewall_rule
-
-# Configure the User Interface rule
-configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	procd_open_instance usp
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	# Inject firewall rules
-	if [ "${enable}" -eq "1" ]; then
-		/etc/firewall.userinterface
-	fi
-
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface"
-}

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbf/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bbk_cli/Makefile

@@ -1,42 +0,0 @@
-#
-# Copright (C) 2018 The Internet Foundation In Sweden
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bbk_cli
-PKG_SOURCE_VERSION:=7b810a696c78b746185c11282bdbe3fb7f8c5d4b
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/dotse/bbk.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bbk_cli
-	CATEGORY:=Utilities
-	DEPENDS:=+libpthread +libstdcpp
-	TITLE:=Bredbandskollen CLI - A bandwidth measurement tool
-endef
-
-define Package/bbk_cli/description
-	To measure connection speed in an environment that is missing a web browser, 
-	for example, in a server, you can use our command line interface bbk_cli, 
-	which is available for some of the most common operating systems.
-endef
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR)/src/cli CROSS_COMPILE="$(TARGET_CROSS)"
-endef
-
-define Package/bbk_cli/install
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/cli/cli $(1)/sbin/bbk_cli
-endef
-
-$(eval $(call BuildPackage,bbk_cli))

bbk_cli/patches/0001-add-openwrt-cross-compile-support.patch

@@ -1,25 +0,0 @@
-diff --git a/src/framework/engine.h b/src/framework/engine.h
-index 57a48ad..9e1bc36 100644
---- a/src/framework/engine.h
-+++ b/src/framework/engine.h
-@@ -10,6 +10,7 @@
- #include <map>
- #include <vector>
- #include <string>
-+#include <sys/select.h>
- 
- #include "logger.h"
- 
-diff --git a/src/framework/mk.inc b/src/framework/mk.inc
-index 793e211..13275be 100644
---- a/src/framework/mk.inc
-+++ b/src/framework/mk.inc
-@@ -7,7 +7,7 @@ OS:=$(shell uname)
- CXXFLAGS += -O2 -W -Wall -I$(DIRLEVEL)
- 
- ifeq ($(OS),Linux)
--CXX = g++
-+CXX = $(CROSS_COMPILE)g++
- endif
- 
- ifeq ($(OS),Darwin)

bootchart2/Makefile

@@ -18,9 +18,6 @@ PKG_SOURCE_VERSION:=3ab81137cafe25c2ca4bc3a5f322a63646f9ce8d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/bootchart2

bulkdata/Makefile

@@ -1,56 +0,0 @@
-#
-# Copyright (C) 2022 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.10
-
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
-endef
-
-TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
-	$(CP) ./files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

bulkdata/files/etc/config/bulkdata

@@ -1,6 +0,0 @@
-
-config bulkdata 'bulkdata'
-	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
-	option log_level '3'
-

bulkdata/files/etc/init.d/bulkdatad

@@ -1,31 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=10
-
-USE_PROCD=1
-PROG="/usr/sbin/bulkdatad"
-
-start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	procd_open_instance bulkdata
-	[ "$enable" -eq "1" ] && {
-		procd_set_param command "$PROG"
-		procd_set_param respawn "3" "7" "0"
-	}
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start 
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger bulkdata
-}

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

bulut/Makefile

@@ -1,38 +0,0 @@
-#
-# Copyright (C) 2019 IOPSYS
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=bulut
-PKG_VERSION:=0.2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/bulut/bulut-gw-client.git
-PKG_SOURCE_VERSION:=227700c44817afa2c392fa08bf4cf70fa6177f01
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/bulut
-	CATEGORY:=Utilities
-	DEPENDS:=
-	TITLE:=bulut
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include
-
-define Package/bulut/description
-	obuspa keys
-endef
-
-define Package/bulut/install
-	$(CP)  $(PKG_BUILD_DIR)/files/* $(1)/
-endef
-
-$(eval $(call BuildPackage,bulut))

catv/Makefile

@@ -1,19 +1,9 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=catv
 PKG_RELEASE:=1
 PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
 include $(INCLUDE_DIR)/package.mk
 
 define Package/catv

catv/files/etc/init.d/catv

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+#
+# Copyright (C) 2015 inteno.org
+#
 
 START=71
 USE_PROCD=1

crashlog/Makefile

@@ -0,0 +1,31 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,56 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serialNumber)
+	hw=$(db get hw.board.hardware)
+	hwv=$(db get hw.board.hardwareVersion)
+	bid=$(db get hw.board.boardId)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${bid}_${hwv}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,61 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="crash.inteno.se"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serialNumber)
+hw=$(db get hw.board.hardware)
+hwv=$(db get hw.board.hardwareVersion)
+bid=$(db get hw.board.boardId)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${bid}_${hwv}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@inteno
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -1,74 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dectmngr
-PKG_RELEASE:=3
-PKG_VERSION:=3.5.7
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=83f89a83cf860bbcf2b7f2e030215db315a5bbbf
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
- 	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
-endef
-
-define Package/$(PKG_NAME)/description
-	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
-endef
-
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/dectmngr
-	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +0,0 @@
-config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'

dectmngr/files/etc/init.d/dectmngr

@@ -1,100 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-source /lib/functions/uci-defaults.sh
-
-START=70
-STOP=12
-
-USE_PROCD=1
-NAME=dectmngr
-PROG=/usr/sbin/dectmngr
-LOG_PATH=/var/log/dectmngr
-DB_PATH=/etc/dect
-
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
-# Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
-stop_and_wait_dectmngr() {
-	pidof $NAME && killall -q $NAME
-
-	pidof $NAME && sleep 2 # wait for the process to stop gracefully
-	while pidof $NAME; do
-		killall -q -9 $NAME 
-		sleep 1
-	done
-}
-
-start_service() {
-	local opt_ext=
-	local rfpi=
-	local model_id=
-	local rxtun=
-
-	test $(db get hw.board.hasDect) = "0" && return
-
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
-
-	rfpi=$(db -q get hw.board.dect_rfpi)
-	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
-
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
-
-	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
-
-	procd_open_instance
-	if [ "$log_dect_cmbs" = "none" ]; then
-		echo "Starting dectmngr with cmbs logging disabled"
-		procd_set_param command $PROG -comname ttyH0 $opt_ext
-		rm -f $LOG_PATH/*
-	elif [ "$log_dect_cmbs" = "file" ]; then
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
-	else
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
-		rm -f $LOG_PATH/*
-	fi
-
-	procd_set_param respawn 6 2 3
-	procd_set_param term_timeout 20
-	procd_set_param triggers asterisk
-	procd_close_instance
-}
-
-stop_service() {
-	test $(db get hw.board.hasDect) = "0" && return
-
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
-	stop_and_wait_dectmngr
-}
-
-reload_service() {
-	ubus call dect reload
-}
-
-service_triggers()
-{
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
-}
-
-boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
-
-	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
-	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH
-	start
-}
-

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dectmngr2/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_RELEASE:=1
+PKG_VERSION:=1.2.0
+PKG_SOURCE_URL:=http://public.inteno.se:/dectmngr2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=877fcbd58d0ead82dbbc4c65f0ad7f8c938fcf74
+PKG_NAME:=dectmngr2
+
+
+RSTRIP:=true
+export BUILD_DIR
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_BUILD_PARALLEL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dectmngr2
+  CATEGORY:=Utilities
+  TITLE:=Dectmngr2
+  URL:=
+  DEPENDS:= +natalie-dect-h bcmkernel +libubox +ubus
+endef
+
+define Package/dectmngr2/description
+	Dectmngr2
+endef
+
+
+define Package/dectmngr2/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/dect/
+	$(INSTALL_DIR) $(1)/etc/config/
+	$(INSTALL_DIR) $(1)/etc/init.d/
+
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/nvs_default $(1)/etc/dect/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
+	$(CP) ./files/dect.config $(1)/etc/config/dect
+endef
+
+$(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

dslmngr/Makefile

@@ -1,79 +0,0 @@
-#
-# Copyright (C) 2018 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=bb754ae620a9fc66fd6fc0745f0fead0708c7a17
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dslmngr.git
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-
-include $(INCLUDE_DIR)/package.mk
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-  TARGET_PLATFORM=BROADCOM
-else
-  $(info Unexpected CONFIG_TARGET)
-endif
-
-export TARGET_PLATFORM
-
-define Package/dslmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=XDSL status and configration utility
-  DEPENDS:=+libdsl +libuci +libubox +ubus +libpthread +libnl-genl +libeasy
-endef
-
-define Package/dslmngr/description
- This package can be used to configure and provide status about
- the XDSL subsystem through UBUS.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-I$(STAGING_DIR)/usr/include/xdsl \
-	-D_GNU_SOURCE
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS)" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/dslmngr/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-define Build/Compile
-	+$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_FLAGS)
-endef
-
-define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,dslmngr))

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,48 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
-
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	local HASADSL="$(db -q get hw.board.hasAdsl)"
-	local HASVDSL="$(db -q get hw.board.hasVdsl)"
-	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
-
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}
-

easy-qos/Makefile

@@ -1,47 +0,0 @@
-#
-# Copyright (C) 2019 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# 
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-qos
-PKG_VERSION:=1.1
-PKG_RELEASE:=0
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=none
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-qos
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
-endef
-
-define Package/easy-qos/description
-	This package contains Easy QoS utility
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./files/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-endef
-
-define Package/easy-qos/install
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
-	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
-	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
-endef
-
-$(eval $(call BuildPackage,easy-qos))

easy-qos/files/etc/firewall.easyqos

@@ -1 +0,0 @@
-/etc/init.d/easy_qos reload

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -1,140 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-USE_PROCD=1
-
-log() {
-	echo "${@}"|logger -t easy_qos.ebtable -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	while [ -n "${rule}" ]; do
-		exec_log ebtables -t broute -D BROUTING ${rule}
-		rule=$(ebtables -t broute -L BROUTING|grep -m 1 mark)
-	done
-}
-
-create_rule() {
-	local protocol=$1; shift
-	local mac=$1; shift
-	local mark="0x$1"; shift
-	local forward_port=$1;
-	local cmd="";
-	local protocol_number
-
-	cmd="-j mark --mark-or ${mark}";
-	if [ -n "${forward_port}" ]; then
-		cmd="--ip-destination-port ${forward_port} ${cmd}";
-	fi
-	
-	case "${protocol}" in
-		"tcp")
-			protocol_number=6;;
-		"udp")
-			protocol_number=17;;
-		"dccp")
-			protocol_number=33;;
-		"sctp")
-			protocol_number=132;;
-		*)
-			log "Protocol ${protocol} not supported in ebtables"
-			return;;
-	esac
-			
-	cmd="--ip-proto ${protocol_number} $cmd"
-	cmd="-p ip $cmd"
-
-	cmd="-s ${mac} $cmd"
-	exec_log ebtables -t broute -A BROUTING ${cmd}
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num protocol
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
-	prio_num=$(get_priority ${priority})
-	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
-		for p in ${port}; do
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num} ${p}
-				create_rule udp ${macaddr} ${prio_num} ${p}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num} ${p}
-			fi
-		done
-		# Create rule for all ports if port is not mentioned in uci
-		if [ -z "${port}" ]; then
-			if [ "${protocol}" == "none" -o "${protocol}" == "tcpudp" ]; then
-				create_rule tcp ${macaddr} ${prio_num}
-				create_rule udp ${macaddr} ${prio_num}
-			else
-				create_rule ${protocol} ${macaddr} ${prio_num}
-			fi
-		fi
-	fi
-}
-
-reload_service() {
-	# Do not apply rules if ebtables is not present in system
-	[ -x /usr/sbin/ebtables ] || return;
-
-	clear_existing_rules
-	config_load easy_qos
-	config_foreach manage_rule rule
-}
-
-start_service() {
-	reload_service
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -1,186 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /usr/share/libubox/jshn.sh
-
-START=99
-USE_PROCD=1
-
-CLIENT_LIST="/tmp/easy_qos_client.list"
-
-log() {
-	echo "${@}"|logger -t easy_qos -p debug
-}
-
-exec_log() {
-	${@}
-	if [ "${?}" -ne 0 ]; then
-		log "Failed to create ${@}";
-	fi
-}
-
-get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
-	case "${prio}" in
-		"lowest")
-			echo 0;;
-		"low")
-			echo 1;;
-		"besteffort")
-			echo 2;;
-		"normal")
-			echo 3;;
-		"video")
-			echo 4;;
-		"medium")
-			echo 5;;
-		"high")
-			echo 6;;
-		"highest")
-			echo 7;;
-	esac
-}
-
-clean_client_entries() {
-	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
-}
-
-map_client_entries() {
-	local clients ip mac host
-
-	json_load "$(ubus call router.network 'clients')"
-	json_get_keys keys
-
-	for key in ${keys};
-	do
-		json_select ${key}
-		json_get_vars ipaddr macaddr hostname
-		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
-		json_select ..
-	done
-
-	json_init
-
-#	json_add_array "clients"
-	IFS=";"
-	for client in ${clients};
-	do
-		macaddr=$(echo ${client} | cut -d" " -f1)
-		json_add_object "${macaddr//:/_}"
-		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
-		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
-		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
-		json_close_object
-	done
-
-	IFS=' '
-	echo `json_dump` > ${CLIENT_LIST}
-	json_cleanup
-}
-
-# Find the IP of a corresponding mac from arp table
-get_ipaddress() {
-	local clients ip mac host
-
-	json_load "$(cat ${CLIENT_LIST})"
-	json_get_keys keys
-
-	# jshn seems a bit iffy on having : in key, replace by _
-	json_select "${1//:/_}" 2 > /dev/null
-	json_get_var ip ip
-
-	echo "$ip"
-}
-
-validate_rule_section()
-{
-	uci_validate_section easy_qos rule "${1}" \
-		'priority:string' \
-		'macaddr:string' \
-		'proto:string:none' \
-		'port:list(uinteger)' \
-		'comment:string:none'
-}
-
-# Clear existing rules before applying new rules
-clear_existing_rules() {
-	local rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	while [ -n "${rule}" ]; do
-		exec_log iptables -t mangle ${rule}
-		rule=$(iptables -t mangle -S PREROUTING | grep -m 1 MARK |sed 's/-A/-D/1')
-	done
-}
-
-check_and_create() {
-	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
-	# Create rule if not exists
-	if [ ${?} -ne 0 ]; then
-		exec_log iptables -t mangle -A PREROUTING ${@}
-	else
-		log "Rule exists for ${@}"
-	fi
-}
-
-create_rule() {
-	local proto=$1; shift
-	local src_ip=$1; shift
-	local mark="0x$1/0x$1"; shift
-	local ports=$1;
-	local cmd="";
-
-	cmd="-j MARK --set-xmark ${mark}";
-	if [ -n "${ports}" ]; then
-		cmd="--match multiport --dports ${ports} ${cmd}";
-	fi
-
-	if [ "${proto}" == "icmp" ]; then
-		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
-	elif [ "${proto}" == "all" ]; then
-		cmd="-p all $cmd"
-	else
-		cmd="-p ${proto} -m ${proto} $cmd"
-	fi
-	cmd="-s ${src_ip} $cmd"
-
-	check_and_create ${cmd} 
-}
-
-manage_rule() {
-	local cfg="$1"
-	local priority macaddr proto port comment prio_num ip port_list
-
-	validate_rule_section "${1}" || {
-		log "Validation of section failed"
-		return 1;
-	}
-
-	prio_num=$(get_priority ${priority})
-	ip=$(get_ipaddress ${macaddr})
-	port_list=$(echo ${port}|sed 's/ /,/g')
-
-	if [ -n "${ip}" -a -n "${prio_num}" ]; then
-		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
-			create_rule tcp ${ip} ${prio_num} ${port_list}
-			create_rule udp ${ip} ${prio_num} ${port_list}
-		else
-			create_rule ${proto} ${ip} ${prio_num} ${port_list}
-		fi
-	fi
-}
-
-reload_service() {
-	clear_existing_rules
-	map_client_entries
-	config_load easy_qos
-	config_foreach manage_rule rule
-	clean_client_entries
-}
-
-start_service() {
-	reload_service
-	echo "Easy QoS installed">/dev/console;
-}
-
-service_triggers() {
-	procd_add_reload_trigger "easy_qos"
-}
-

easy-qos/files/etc/uci-defaults/60-easyqos-reqs

@@ -1,8 +0,0 @@
-# Add firewall include
-uci -q batch <<-EOT
-        delete firewall.easyqos
-        set firewall.easyqos=include
-        set firewall.easyqos.path=/etc/firewall.easyqos
-        set firewall.easyqos.reload=1
-        commit firewall
-EOT

easy-soc-events/Makefile

@@ -1,110 +0,0 @@
-# All rights reserved.
-# See LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=easy-soc-events
-PKG_VERSION:=1.1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=git@dev.iopsys.eu:iopsys/easy-soc-events.git
-PKG_SOURCE_VERSION:=5c582b0165b574dc94e4865f82e0bb91fa561754
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/easy-soc-events-$(PKG_VERSION)
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-
-include $(INCLUDE_DIR)/package.mk
-
--include $(TOPDIR)/.config
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-  LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
-  LINUX_VERSION := 4.1.52
-  LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
-  BCM_BS_PROFILE := $(patsubst "%",%,$(CONFIG_BCM_KERNEL_PROFILE))
-  FS_DIR := $(BUILD_DIR)/bcmkernel/bcm963xx/targets/$(BCM_BS_PROFILE)/fs
-  MODULES_SUBDIR:=lib/modules/$(LINUX_VERSION)/extra
-  TARGET_MODULES_DIR:=/$(MODULES_SUBDIR)
-endif
-
-
-define KernelPackage/easy-soc-events/default
-  SUBMENU:=Other modules
-endef
-
-define KernelPackage/easy-soc-events
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Helper module for netlink event notification
-  FILES:=$(PKG_BUILD_DIR)/easyevent.ko
-  AUTOLOAD:=$(call AutoLoad,11,easyevent)
-endef
-
-define KernelPackage/easy-soc-events-test
-  $(KernelPackage/easy-soc-events/default)
-  TITLE:=Test module for event notification through easyevent
-  DEPENDS+=+kmod-easy-soc-events
-  FILES+=$(PKG_BUILD_DIR)/test/testevent.ko
-endef
-
-
-define KernelPackage/easy-soc-events/description
-  This is a helper module to generate and pass netlink events from
-  kernel to user applications.
-endef
-
-#NOSTDINC_FLAGS :=
-
-ifdef CONFIG_PACKAGE_kmod-easy-soc-events
-  PKG_MAKE_FLAGS += CONFIG_EASYEVENT=y
-endif
-
-LINUXINCLUDE += \
-		-I$(LINUX_DIR)/include -I$(LINUX_DIR)/include/$(LINUX_UAPI_DIR) \
-		-Iarch/$(LINUX_KARCH)/include \
-		-Iarch/$(LINUX_KARCH)/include/generated \
-		-Iarch/$(LINUX_KARCH)/include/generated/$(LINUX_UAPI_DIR) \
-		-I$(LINUX_DIR)/include/generated/uapi \
-		-Iarch/$(LINUX_KARCH)/include/$(LINUX_UAPI_DIR) \
-		-include ./include/linux/kconfig.h
-
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-endef
-
-define Build/Compile
-	$(MAKE) $(PKG_JOBS) -C "$(LINUX_DIR)" \
-		$(KERNEL_MAKE_FLAGS) V=1 \
-		$(PKG_MAKE_FLAGS) \
-		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
-		LINUXINCLUDE="$(LINUXINCLUDE)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		modules
-endef
-
-
-ifneq ($(CONFIG_TARGET_brcmbca),)
-define KernelPackage/easy-soc-events/install-extra
-	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
-endef
-endif
-
-define KernelPackage/easy-soc-events/install
-	$(call KernelPackage/easy-soc-events/install-extra)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(STAGING_DIR)/usr/include
-	#$(INSTALL_DIR) $(STAGING_DIR)/usr/include/linux
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(STAGING_DIR)/usr/include/linux/
-	#$(CP) $(PKG_BUILD_DIR)/easysoc-event.h $(LINUX_DIR)/include/linux/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(STAGING_DIR)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/easyevent.h $(LINUX_DIR)/include/generated/uapi
-	$(CP) $(PKG_BUILD_DIR)/wifievent.h $(LINUX_DIR)/include/generated/uapi
-endef
-
-$(eval $(call KernelPackage,easy-soc-events-test))
-$(eval $(call KernelPackage,easy-soc-events))

easy-soc-libs/Makefile

@@ -1,156 +0,0 @@
-#
-# Copyright (C) 2020 iopsys Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=easy-soc-libs
-PKG_VERSION:=7.2.26
-PKG_RELEASE:=1
-
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=350793b45873480d8981dac540c4145705a7b7ba
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
-PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/easy-soc-libs
-  SECTION:=libs
-  CATEGORY:=Libraries
-  TITLE:=IOPSYS Easy SoC libraries
-  SUBMENU:=IOPSYS Easy SoC libraries
-  DEPENDS:=+libopenssl
-  MENU:=1
-endef
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-  TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
-  CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
-  TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
-	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
-else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
-  TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
-  TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
-  TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MEDIATEK MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
-else ifeq ($(CONFIG_TARGET_ipq95xx),y)
-  TARGET_PLATFORM=IPQ95XX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-  TARGET_PLATFORM=LINUX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_LINUX
-else
-  $(info Unexpected CONFIG_TARGET, use default MAC80211)
-  TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_MAC80211
-endif
-
-subdirs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-ifneq ($(CONFIG_PACKAGE_libwifi),)
-TARGET_CFLAGS +=-DHAS_WIFI
-endif
-
-esl-pkgs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-esl-pkgs-all := \
-	libeasy \
-	libwifiutils \
-	libwifi \
-	libdsl \
-	libethernet \
-	libqos
-
-ifeq ($(CONFIG_LIBWIFI_USE_CTRL_IFACE),y)
-  TARGET_CFLAGS +=-DLIBWIFI_USE_CTRL_IFACE
-endif
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/openssl \
-	-I$(STAGING_DIR)/usr/include/libnl3
-
-MAKE_FLAGS += \
-	CFLAGS="$(TARGET_CFLAGS) -Wall -I./" \
-	LDFLAGS="$(TARGET_LDFLAGS)" \
-	FPIC="$(FPIC)" \
-	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
-	subdirs="$(subdirs)"
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	rsync -r --exclude=.* ~/git/easy-soc-libs/ $(PKG_BUILD_DIR)/
-endef
-endif
-
-include easy.mk
-include wifi.mk
-include dsl.mk
-include ethernet.mk
-include qos.mk
-
-ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),\
-	$(PKG_BUILD_DIR)/.config_$(patsubst "%",%,$(CONFIG_TARGET_PROFILE)))
-define Build/Compile/rebuild
-	$(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.so\* | $(XARGS) rm -f;
-	$(if $(wildcard $(PKG_BUILD_DIR)/config_*), \
-		rm -f $(PKG_BUILD_DIR)/.config_*)
-endef
-endif
-
-STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(TARGET_CFLAGS) | mkhash md5)
-
-define Build/Compile
-	$(Build/Compile/rebuild)
-	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
-	$(call Build/Compile/Default)
-	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
-endef
-
-define Build/InstallDev
-	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
-endef
-
-define Package/easy-soc-libs/install
-	:
-endef
-
-$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))

easy-soc-libs/dsl.mk

@@ -1,44 +0,0 @@
-
-define Package/libdsl
-  $(call Package/easy-soc-libs)
-  TITLE:= xDSL library (libdsl)
-endef
-
-define Package/libdsl/config
-  if PACKAGE_libdsl
-	  config LIBDSL_DEBUG
-		depends on PACKAGE_libdsl
-		bool "Enable dsl debugging"
-		default n
-
-	  config LIBDSL_TEST
-		depends on PACKAGE_libdsl
-		bool "Enable dsl test program"
-		default n
-
-  endif
-endef
-
-define Build/InstallDev/libdsl
-	$(INSTALL_DIR) $(1)/usr/include/xdsl
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xdsl.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/xtm.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/common.h $(1)/usr/include/xdsl
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-endef
-
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-define Build/Compile/libdsl
-	$(MAKE) -C "$(PKG_BUILD_DIR)/libdsl/test" $(MAKE_FLAGS)
-endef
-endif
-
-define Package/libdsl/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(CP) $(PKG_BUILD_DIR)/libdsl/libdsl.so* $(1)/usr/lib/
-ifeq ($(CONFIG_LIBDSL_TEST),y)
-	$(CP) $(PKG_BUILD_DIR)/libdsl/test/libdsl_test $(1)/usr/bin/
-endif
-endef

easy-soc-libs/easy.mk

@@ -1,25 +0,0 @@
-
-
-define Package/libeasy
-  $(call Package/easy-soc-libs)
-  TITLE:= Common helper functions library (libeasy)
-  DEPENDS+=+libnl +libnl-route
-endef
-
-define Build/InstallDev/libeasy
-	$(INSTALL_DIR) $(1)/usr/include/easy
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/easy.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/event.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/if_utils.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/debug.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/hlist.h $(1)/usr/include/easy/
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-
-define Package/libeasy/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libeasy/libeasy*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/ethernet.mk

@@ -1,27 +0,0 @@
-
-define Package/libethernet
-  $(call Package/easy-soc-libs)
-  TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api
-endef
-
-define Package/libethernet/config
-  config LIBETHERNET_DEBUG
-	depends on PACKAGE_libethernet
-	bool "Enable ethernet debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libethernet
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/ethernet.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so $(1)/usr/lib/
-endef
-
-define Package/libethernet/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libethernet/libethernet.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/qos.mk

@@ -1,27 +0,0 @@
-
-define Package/libqos
-  $(call Package/easy-soc-libs)
-  TITLE:= QoS library (libqos)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Package/libqos/config
-  config LIBQOS_DEBUG
-	depends on PACKAGE_libqos
-	bool "Enable qos debugging"
-	default n
-
-endef
-
-define Build/InstallDev/libqos
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/include/qos.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos.so $(1)/usr/lib/
-endef
-
-define Package/libqos/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libqos/libqos*.so* $(1)/usr/lib/
-endef
-

easy-soc-libs/wifi.mk

@@ -1,53 +0,0 @@
-
-define Package/libwifiutils
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi utility library (libwifiutils.so)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Build/InstallDev/libwifiutils
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifiutils/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-
-define Package/libwifi
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
-endef
-
-define Package/libwifi/config
-  if PACKAGE_libwifi
-  	config LIBWIFI_DEBUG
-		depends on PACKAGE_libwifi
-		bool "Enable debugging in libwifi"
-		default n
-
-	config LIBWIFI_USE_CTRL_IFACE
-		bool "Create UNIX sockets to interface with hostapd/wpa_supplicant"
-		default n
-  endif
-endef
-
-
-define Build/InstallDev/libwifi
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
-endef

endptmngr/Makefile

@@ -1,36 +1,35 @@
 #
-# Copyright (C) 2018 IOPSYS Software Solutions AB
+# Copyright (C) 2006-2010 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
+
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
+PKG_RELEASE:=1
+PKG_VERSION:=0.2
+PKG_SOURCE_VERSION:=0cb8accbac3355b97a17064ec7da010a2c42db7b
 
-LOCAL_DEV=0
-ifneq ($(LOCAL_DEV),1)
+
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+BRCM_KERNEL_PROFILE=$(shell echo $(CONFIG_BCM_KERNEL_PROFILE) | sed s/\"//g)
+PKG_SOURCE:=endptmngr-$(BRCM_KERNEL_PROFILE)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/
+PKG_NAME:=endptmngr-open
+else
+PKG_SOURCE_URL:=git@private.inteno.se:endptmngr
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
+PKG_NAME:=endptmngr
 endif
 
-PKG_LICENSE:=PROPRIETARY
-PKG_LICENSE_FILES:=LICENSE
-
+RSTRIP:=true
 export BUILD_DIR
 
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_PARALLEL:=1
 
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
-export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -40,28 +39,27 @@ endef
 
 define Package/endptmngr
   CATEGORY:=Utilities
-  TITLE:=Broadcom Voice Endpoint Manager
+  TITLE:=Brcmslic
   URL:=
-  DEPENDS:= +libubox +ubus +libpicoevent +uci +bcmkernel @TARGET_HAS_VOICE @BCM_VOICE
+  DEPENDS:= +libubox +ubus +libpicoevent +PACKAGE_bcmkernel:bcmkernel +PACKAGE_bcmopen:bcmopen
 endef
 
 define Package/endptmngr/description
 	endptmngr
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -av --exclude=.* ~/git/endptmngr/* $(PKG_BUILD_DIR)/
+ifeq ($(CONFIG_ENDPT_OPEN),y)
+
+define Build/Compile
 endef
+
 endif
 
-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
 
 define Package/endptmngr/install
-	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d/
+	cp $(PKG_BUILD_DIR)/files/etc/init.d/* $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/endptmngr $(1)/usr/sbin/
 endef
 

endptmngr/files/dect.config

@@ -0,0 +1,4 @@
+
+config dect 'dect'
+	option radio 'auto'
+

endptmngr/files/etc/init.d/endptmngr

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=endptmngr
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-	procd_open_instance
-	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_set_param nice -12
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger asterisk 
-}

ethmngr/Makefile

@@ -1,60 +0,0 @@
-#
-# Copyright (C) 2020 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ethmngr.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_HASH:=skip
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_LICENSE:=GPL-2.0-only
-PKG_LICENSE_FILES:=LICENSE
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ethmngr
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_iopsys_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
-endef
-
-define Package/ethmngr/description
- This package can be used to configure and provide status about
- the ethernet interfaces and ports through UBUS.
- It uses APIs from the libethernet.so library.
-endef
-
-TARGET_CFLAGS += \
-	-I$(STAGING_DIR)/usr/include \
-	-I$(STAGING_DIR)/usr/include/libnl3 \
-	-D_GNU_SOURCE
-
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-define Build/Compile
-endef
-endif
-
-define Package/ethmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca),)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
-else
-	$(CP) ./files/linux/* $(1)/
-endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
-endef
-
-$(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -1,208 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset -f switchmgr
-# alias for switchmgr
-switchmgr() {
-	"/userfs/bin/switchmgr" "$@"
-}
-
-unset -f tc3162_get_lan_port
-# get lan port port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_lan_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-
-	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
-	case "${ifname}" in
-	eth0.*)
-		;;
-	*)
-		logger -t "port-management" \
-		"unsupported - ${ifname} is not tc3162 switch port"
-		return 255
-		;;
-	esac
-
-	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
-	[[ -z "${if_idx}" ]] && return 255
-	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
-		logger -t "port-management" \
-		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
-		return 255
-	}
-	let "if_idx=${if_idx}-1"
-	return ${if_idx}
-}
-
-
-unset -f tc3162_get_mapped_port
-# get mapped switch port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_mapped_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-	local prtmap_procfile="/proc/tc3162/eth_portmap"
-	local lan_prt=255
-	local port=255
-	local prtmap_out_line_num=4
-	local prtmap_out_line=""
-	
-	# check "lan port map" marker in portmap output string
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
-
-	tc3162_get_lan_port "${ifname}"
-	let "if_idx=$?"
-	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
-
-	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
-	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-
-	# get and check lan port index from lan portmapping string
-	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
-	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
-
-	# get and check mapped port from lan portmapping string
-	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
-	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
-
-	return ${port}
-}
-
-unset -f get_max_port_speed
-# arg1: port ifname, ex: eth0.1
-get_max_port_speed() {
-	[[ -z "$1" ]] && { echo 0; return; }
-
-	local ifname="$1"
-	local port=255
-	local speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	# tc3162 capability for all ports is 1Gbps
-	speed=1000
-
-	echo $speed
-}
-
-unset -f power_updown
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-power_updown() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local port=255
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	switchmgr phy admin "${port}" "${enabled}"
-}
-
-unset -f set_port_settings
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: 0/1/off/on/..
-# arg6: port eee, ex: 0/1/off/on/..
-# arg7: port pause, ex: 0/1/off/on/..
-set_port_settings() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-	[[ -z "$3" ]] && return
-	[[ -z "$4" ]] && return
-	[[ -z "$5" ]] && return
-	[[ -z "$6" ]] && return
-	[[ -z "$7" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local speed="$3"
-	local duplex="$4"
-	local autoneg=$5
-	local eee="$6"
-	local pause="$7"
-	local port=255
-	local speedmode=1
-	local last_speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-	
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	let "autoneg=$(get_bool "${autoneg}" "-1")"
-	[[ ${autoneg} -eq -1 ]] && return
-
-	let "eee=$(get_bool "${eee}" "-1")"
-	[[ ${eee} -eq -1 ]] && return
-	
-	let "pause=$(get_bool "${pause}" "-1")"
-	[[ ${pause} -eq -1 ]] && return
-	
-	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
-	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-	
-	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
-	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
-		&& last_speed=${speed}
-	
-	switchmgr phy pause "${port}" "${pause}"
-
-	# set speedmode: speed+duplex+autoneg
-# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
-	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
-		switchmgr phy speedmode ${port} "1"
-	else
-		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
-		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
-		switchmgr phy speedmode "${port}" "${speedmode}"
-	fi
-	
-# TODO: implement MAC control register manipulations (mapped ports used) for
-	# eee settings change
-	# separate (tx/rx) pause (flow control) settings change
-	# set speed to 1Gbps separately from autoneg mode
-	
-# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
-	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
-
-	power_updown "${ifname}" ${enabled}
-
-}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -1,140 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
-	local speed=1000
-
-	case "$phycap" in
-		10GFD) speed=10000 ;;
-		5GFD) speed=5000 ;;
-		2.5GFD) speed=2500 ;;
-		1GFD|1GHD) speed=1000 ;;
-		100MFD|100MHD) speed=100 ;;
-		10MFD|10MHD) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port name, ex: eth0
-get_port_number() {
-	[ -z "$1" ] && return
-	local ports="0 1 2 3 4 5 6 7 8"
-	local units="0 1"
-	local port="$1"
-	local ifname
-
-	for unit in $units; do
-		for prt in $ports; do
-			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
-			if [ "$ifname" == "$port" ]; then
-				echo "$unit $prt"
-				return
-			fi
-		done
-	done
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ethctl $ifname phy-power $updown >/dev/null
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	local unitport="$(get_port_number $ifname)"
-	local unit=$(echo $unitport | cut -d ' ' -f 1)
-	local port=$(echo $unitport | cut -d ' ' -f 2)
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	[ "$duplex" == "half" ] && duplex=0 || duplex=1
-	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
-	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
-
-	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
-	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
-	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
-	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
-
-	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
-	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
-
-	if [ "$numofcaps" == "1" ]; then
-		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
-	else
-		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
-		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
-	fi
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-	if [ "$auto" == "on" ]; then
-		# Use ethswctl utility to set pause autoneg
-		# as ethtool is not setting it properly
-		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
-	else
-		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-	fi
-
-	power_updown $ifname $enabled
-}

ethmngr/files/common/etc/init.d/ethmngr

@@ -1,50 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=15
-STOP=90
-
-USE_PROCD=1
-PROG=/usr/sbin/ethmngr
-
-. /lib/functions.sh
-include /lib/ethernet
-
-configure_ethernet_port(){
-	local cfg=$1
-	local ifname enabled speed duplex autoneg eee pause
-
-	config_get ifname $cfg ifname
-	[ -d /sys/class/net/$ifname ] || return
-
-	config_get enabled $cfg enabled 1
-	config_get speed $cfg speed 1000
-	config_get duplex $cfg duplex "full"
-	config_get autoneg $cfg autoneg 1
-	config_get eee $cfg eee 0
-	config_get pause $cfg pause 0
-
-	set_port_settings $ifname $enabled $speed $duplex $autoneg $eee $pause
-}
-
-start_service() {
-	if [ -s /etc/config/ports ]; then
-		config_load ports
-		config_foreach configure_ethernet_port ethport
-	fi
-
-	if [ -f $PROG ]; then
-		procd_open_instance
-		procd_set_param command ${PROG}
-		procd_set_param respawn
-		procd_close_instance
-	fi
-}
-
-reload_service() {
-        stop
-        start
-}
-
-service_triggers() {
-	procd_add_reload_trigger ports
-}

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-populate_config_from_db() {
-	. /lib/functions.sh
-	. /lib/network/utils.sh
-	include /lib/ethernet
-
-	portorder="$(db -q get hw.board.ethernetPortOrder)"
-	for port in $portorder; do
-		speed="$(get_max_port_speed $port 2>/dev/null)"
-		speed="${speed:-1000}"
-
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$(get_port_name $port)"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$(get_port_name $port)"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-
-	uci commit ports
-}
-
-populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
-		[ -n "$port" ] || continue
-		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
-		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$PORT"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$PORT"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$port" = "wan" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-	uci commit ports
-}
-
-if [ -s "/etc/config/ports" ]; then
-	if uci -q get ports.@ethport[0] >/dev/null; then
-		# exit if there is any valid content
-		exit 0
-	else
-		rm -f /etc/config/ports
-	fi
-fi
-
-touch /etc/config/ports
-
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
-	populate_config_from_db
-elif [ -d /proc/device-tree/ ]; then
-	populate_config_from_device_tree
-fi

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -1,95 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
-	local speed=1000
-
-	case "$phycap" in
-		10000*) speed=10000 ;;
-		5000*) speed=5000 ;;
-		2500*) speed=2500 ;;
-		1000*) speed=1000 ;;
-		100*) speed=100 ;;
-		10*) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ip link set dev $ifname $updown
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-
-	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-
-	power_updown $ifname $enabled
-}

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

evoice/Makefile

@@ -1,106 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,334 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,181 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,56 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

fatrace/Makefile

@@ -1,7 +1,7 @@
 #
 # Copyright (C) 2006-2010 OpenWrt.org
 #
-# This is free software, licensed under the GNU General Public License v3.
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
@@ -20,9 +20,6 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=GPL-3.0
-PKG_LICENSE_FILES:=LICENSE
-
 # support parallel build
 #PKG_BUILD_PARALLEL:=1
 

fdtextract/Makefile

@@ -1,48 +0,0 @@
-#
-# Copyright (C) 2021 IOPSYS Software Solutions AB
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=fdtextract
-PKG_RELEASE:=1
-PKG_VERSION:=1.0
-
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
-PKG_MIRROR_HASH:=skip
-
-PKG_LICENSE:=GPLv2
-PKG_LICENSE_FILES:=LICENSE
-
-RSTRIP:=true
-export BUILD_DIR
-
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Utilities
-	TITLE:=fdtextract
-	DEPENDS:= +libfdt
-endef
-
-define Package/$(PKG_NAME)/description
-	Command to extract sub images from FIT images.
-endef
-
-define Package/$(PKG_NAME)/install
-	$(INSTALL_DIR) $(1)/usr/sbin
-
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/fdtextract $(1)/usr/sbin/
-	$(STRIP) $(1)/usr/sbin/fdtextract
-endef
-
-$(eval $(call BuildPackage,$(PKG_NAME)))

fping/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2016 Nikil Mehta <nikil.mehta@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=fping
+PKG_VERSION:=4.0
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+PKG_SOURCE_URL:=http://fping.org/dist/
+PKG_HASH:=67eb4152b98ad34f99d2eec4e1098a0bb52caf13c0c89cd147349d08190fe8ce
+
+PKG_MAINTAINER:=Nikil Mehta <nikil.mehta@gmail.com>
+PKG_LICENSE:=BSD-4-Clause
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/fping
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=sends ICMP ECHO_REQUEST packets to network hosts
+  URL:=http://fping.org/
+endef
+
+
+define Package/fping/description
+	fping is a ping like program which uses the Internet Control Message Protocol
+	(ICMP) echo request to determine if a target host is responding.  fping
+	differs from ping in that you can specify any number of targets on the command
+	line, or specify a file containing the lists of targets to ping.  Instead of
+	sending to one target until it times out or replies, fping will send out a
+	ping packet and move on to the next target in a round-robin fashion.
+endef
+
+CONFIGURE_ARGS+= \
+	--enable-ipv4 \
+	--enable-ipv6
+
+TARGET_CFLAGS += -std=gnu99
+
+define Package/fping/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/fping $(1)/usr/bin/
+endef
+
+$(eval $(call BuildPackage,fping))

gigaset-elements/.gitignore

@@ -0,0 +1,3 @@
+
+git-src
+

gigaset-elements/Makefile

@@ -0,0 +1,65 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=gigaset-elements
+
+PKG_VERSION:=2.4.2
+# PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_GIGASET_ELEMENTS_SRC_URL ?= git@public.inteno.se:gigaset-elements.git
+PKG_GIGASET_ELEMENTS_VERSION ?= v$(PKG_VERSION)
+
+PKG_SOURCE_URL:=$(PKG_GIGASET_ELEMENTS_SRC_URL)
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=aa906b37062b6d7937a9c0f8e7b62b32afe4bdeb
+
+
+PKG_MAINTAINER:=Magier Marcin, Figlarek Piotr
+
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
+
+include $(INCLUDE_DIR)/package.mk
+
+######################################################
+
+define Package/gigaset-elements
+  SECTION:=utils
+  CATEGORY:=Utilities
+  DEPENDS:=+libjson-c +libcurl +libpthread
+  TITLE:=Gigaset elements
+endef
+
+######################################################
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) all
+endef
+
+
+
+define Package/gigaset-elements/install
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_common/* $(1)/
+	$(CP) -r $(PKG_BUILD_DIR)/sysroot_$(CONFIG_ARCH)/* $(1)/
+endef
+
+
+
+define Package/gigaset-elements/preinst
+#!/bin/sh
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/cert
+mkdir -p $${IPKG_INSTROOT}/usr/gigaset/data/fw
+endef
+
+
+define Package/gigaset-elements/postrm
+#!/bin/sh
+rm -rf $${IPKG_INSTROOT}/usr/gigaset/data
+rm -rf /usr/share/gigaset
+endef
+
+
+######################################################
+
+$(eval $(call BuildPackage,gigaset-elements))
+

gryphon-led-module/Makefile

@@ -1,90 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=gryphon-led-kernel-module
-PKG_RELEASE:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/$(PKG_NAME)
-  SUBMENU:=LED modules
-  TITLE:=LED driver for Gryphon
-  FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
-  KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
-  AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
-  PKG_LICENSE:=GPLv2
-  PKG_LICENSE_URL:=
-endef
-
-define KernelPackage/$(PKG_NAME)/description
-  This package contains the LED driver for Gryphon devices.
-endef
-
-EXTRA_KCONFIG:= CONFIG_RGB_LED=m
-
-MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
-
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/
-	$(CP) src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="-DKERNEL_MODULE $(BUILDFLAGS) -I$(LINUX_DIR)/include -include generated/autoconf.h $(MODULE_INCLUDE)" \
-		modules
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-endef
-
-$(eval $(call KernelPackage,$(PKG_NAME)))

gryphon-led-module/src/Makefile

@@ -1,26 +0,0 @@
-# Copyright (c) 2017 Genexis B.V.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# version 2 as published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-# 02110-1301 USA
-
-MODULE_NAME  = gryphon-led-kernel-module
-
-obj-m  := $(MODULE_NAME).o
-
-GENEXIS_FILES= \
-	main.o \
-	sk9822.o \
-	sk9822_bitbang.o
-
-$(MODULE_NAME)-objs := $(GENEXIS_FILES)

gryphon-led-module/src/main.c

@@ -1,330 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#define DEBUG 1
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/printk.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/gpio/consumer.h>
-#include <linux/of.h>
-#include <linux/version.h>
-
-#include "sk9822.h"
-
-#define DRIVER_NAME			"canyon_led"
-#define DRIVER_AUTHOR		"Genexis B.V."
-#define DRIVER_DESC			"Canyon LED driver for SK9822"
-#define DRIVER_VERSION	"1"
-
-/**
- * sysfs interfaces
- */
-
-static ssize_t get_led_color(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%02x%02x%02x\n", sk9822->led_colors[0].r, sk9822->led_colors[0].g, sk9822->led_colors[0].b);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set complete LED strip to a specific color
- * @retval count number of bytes written
- * @retval -EMSGSIZE if the message is too big
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_color(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	size_t buflen = count;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	/* strip newline */
-	if ((count > 0) && (buf[count-1] == '\n')) {
-		buflen--;
-	}
-
-	if (buflen != 6) { // RRGGBB\0
-		return -EMSGSIZE;
-	}
-
-	// Update the LED array here
-	ret = sk9822_set_color_str(sk9822, buf);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to set led color\n");
-		return -EIO;
-	}
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_color, S_IRUGO | S_IWUSR, get_led_color, set_led_color);
-
-static ssize_t get_led_brightness(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	int len;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	len = scnprintf(buf, PAGE_SIZE, "%x\n", sk9822->led_brightness);
-	if (len <= 0) {
-		dev_err(dev, "sk9822: Invalid sprintf len: %d\n", len);
-		return -EIO;
-	}
-
-	return len;
-}
-
-/**
- * @brief Set LED brightness
- * @retval count number of bytes written
- * @retval -EINVAL if the message is not a valid hexadecimal number
- * @retval -EIO for all other errors (e.g. leds cannot be configured)
- */
-static ssize_t set_led_brightness(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	int ret = 0;
-	struct sk9822_leds *sk9822 = dev_get_drvdata(dev);
-	unsigned long val = SK9822_DEFAULT_BRIGHTNESS;
-
-	if (IS_ERR(sk9822)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -EIO;
-	}
-
-	if (kstrtoul(buf, 16, &val)) {
-		return -EINVAL;
-	}
-
-	if(val > SK9822_DEFAULT_BRIGHTNESS) {
-		val = SK9822_DEFAULT_BRIGHTNESS;
-	}
-
-	sk9822->led_brightness = (uint8_t)val;
-
-	// Now push to the HW
-	ret = sk9822_update(sk9822);
-	if (ret != 0) {
-		printk(KERN_ERR "Failed to update led\n");
-		return -EIO;
-	}
-
-	return count;
-}
-static DEVICE_ATTR(led_brightness, S_IRUGO | S_IWUSR, get_led_brightness, set_led_brightness);
-
-
-static struct attribute *sk9822_dev_attrs[] = {
-	 &dev_attr_led_color.attr,
-	 &dev_attr_led_brightness.attr,
-	 NULL
-};
-
-static struct attribute_group sk9822_dev_attr_group = {
-	.name = "sk9822",
-	.attrs = sk9822_dev_attrs,
-};
-
-/**
- * device prope and removal
- */
-
-static int canyon_led_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct sk9822_leds *leds;
-
-	leds = devm_kzalloc(&pdev->dev, sizeof(*leds), GFP_KERNEL);
-	if (!leds) {
-		return -ENOMEM;
-	}
-	leds->dev = &pdev->dev;
-	leds->led_brightness = SK9822_DEFAULT_BRIGHTNESS;
-
-	ret = of_property_read_u16(pdev->dev.of_node, "led-count", &leds->led_count);
-	if (ret < 0) {
-		dev_warn(&pdev->dev, "Could not read led-count property\n");
-		leds->led_count = SK9822_DEFAULT_NUM_LEDS;
-	} else {
-		printk(KERN_INFO "Got led count: %u\n", leds->led_count);
-	}
-
-	leds->led_colors = devm_kzalloc(&pdev->dev,
-			(sizeof(cRGB) * leds->led_count), GFP_KERNEL);
-	if (!leds->led_colors) {
-		return -ENOMEM;
-	}
-
-
-	platform_set_drvdata(pdev, leds);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->clock_gpio = gpiod_get_index(&pdev->dev, "led", 0, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	}
-
-	gpiod_direction_output(leds->clock_gpio, 1);
-	if (IS_ERR(leds->clock_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
-				PTR_ERR(leds->clock_gpio));
-		return PTR_ERR(leds->clock_gpio);
-	} else {
-		printk(KERN_INFO "Got clock gpio\n");
-		gpiod_set_value(leds->clock_gpio, 0);
-	}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1);
-#elif LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0)
-	leds->data_gpio = gpiod_get_index(&pdev->dev, "led", 1, GPIOD_OUT_HIGH);
-#else
-	dev_warn(&pdev->dev, "Kernel version Not supported\n");
-	exit(1);
-#endif
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	}
-
-	gpiod_direction_output(leds->data_gpio, 1);
-	if (IS_ERR(leds->data_gpio)) {
-		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
-				PTR_ERR(leds->data_gpio));
-		return PTR_ERR(leds->data_gpio);
-	} else {
-		printk(KERN_INFO "Got data gpio\n");
-		gpiod_set_value(leds->data_gpio, 0);
-	}
-
-	printk(KERN_INFO "Attempt to set filefs stuff\n");
-	ret = sysfs_create_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-	if (ret) {
-		dev_err(&pdev->dev, "sysfs creation failed\n");
-		return ret;
-	}
-
-#if 0
-	printk(KERN_INFO "Flash LEDs to verify they work\n");
-	sk9822_set_color_str(leds, "00FF00");
-	sk9822_update(leds);
-	msleep(200);
-	sk9822_set_color_str(leds, "000000");
-	sk9822_update(leds);
-#endif
-
-	printk(KERN_INFO "canyon led successfully probed\n");
-
-	return 0;
-}
-
-static int canyon_led_remove(struct platform_device *pdev)
-{
-	struct sk9822_leds *leds;
-
-	sysfs_remove_group(&pdev->dev.kobj, &sk9822_dev_attr_group);
-
-	leds = platform_get_drvdata(pdev);
-	if (IS_ERR(leds)) {
-		printk(KERN_ERR "Platform get drvdata returned NULL\n");
-		return -1;
-	}
-
-	if (leds->clock_gpio) {
-		gpiod_put(leds->clock_gpio);
-	}
-
-	if (leds->data_gpio) {
-		gpiod_put(leds->data_gpio);
-	}
-
-	printk(KERN_NOTICE "Bye, bye\n");
-
-	return 0;
-}
-
-/**
- * platform driver metadata
- */
-
-static const struct of_device_id canyon_led_of_ids[] = {
-	{ .compatible = "canyon,led" },
-	{ }
-};
-
-static struct platform_driver canyon_led = {
-	.probe = &canyon_led_probe,
-	.remove = &canyon_led_remove,
-	.driver = {
-		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
-		.of_match_table = canyon_led_of_ids,
-	},
-};
-
-MODULE_DEVICE_TABLE(of, canyon_led_of_ids);
-module_platform_driver(canyon_led);
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");

gryphon-led-module/src/sk9822.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-#include "sk9822_bitbang.h"
-
-cRGB __hexs_to_rgb(const char *hex)
-{
-	cRGB rgb;
-	int r, g, b;
-
-	sscanf(hex, "%02x%02x%02x", &r, &g, &b);
-	// This needs sanity checking
-	rgb.r = r;
-	rgb.g = g;
-	rgb.b = b;
-	return rgb;
-}
-
-/**
- * @brief update the color over the given device struct to the provided HEX color
- */
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex)
-{
-	int i;
-	cRGB color = __hexs_to_rgb(hex);
-
-	for (i = 0; i < sk9822->led_count; i++) {
-		sk9822->led_colors[i] = color;
-	}
-
-	return 0;
-}
-
-/**
- * @brief write device struct to the device
- */
-int sk9822_update(struct sk9822_leds *sk9822)
-{
-	uint16_t i;
-	uint16_t led_count = sk9822->led_count;
-
-	// Start Frame
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-	sk9822_bb_write(sk9822, 0x00);
-
-	for (i = 0; i < led_count; i++) {
-		cRGB *p = &sk9822->led_colors[i];
-		sk9822_bb_write(sk9822, 0xe0+sk9822->led_brightness);  // Maximum global brightness
-		sk9822_bb_write(sk9822, p->b);
-		sk9822_bb_write(sk9822, p->g);
-		sk9822_bb_write(sk9822, p->r);
-	}
-
-	// End frame
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-	sk9822_bb_write(sk9822, 0xff);
-
-	return 0;
-}

gryphon-led-module/src/sk9822.h

@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef SK9822_H_
-#define SK9822_H_
-
-#include <linux/types.h>
-
-#define SK9822_DEFAULT_NUM_LEDS 32 // U16, used if DT param fails
-#define SK9822_DEFAULT_BRIGHTNESS 15  // 5-bit brightness, 0-31
-
-typedef struct {
-	uint8_t b;
-	uint8_t g;
-	uint8_t r;
-} cRGB;   // BGR (SK9822 Standard)
-
-struct sk9822_leds {
-	struct device *dev;
-	struct gpio_desc *clock_gpio;
-	struct gpio_desc *data_gpio;
-
-	cRGB *led_colors;
-	uint8_t led_brightness;
-	uint16_t led_count;
-};
-
-int sk9822_set_color_str(struct sk9822_leds *sk9822, const char *hex);
-int sk9822_update(struct sk9822_leds *sk9822);
-
-#endif /* SK9822_H_ */

gryphon-led-module/src/sk9822_bitbang.c

@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/gpio/consumer.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-/**
- * @brief Bitbang write operation CLOCK+DATA
- *
- * Assumed state before call: CLOCK- Low, DATA- High
- */
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c)
-{
-	uint8_t i;
-
-	for (i = 0; i < 8 ; i++) {
-		if (!(c&0x80)) {
-			gpiod_set_value(sk9822->data_gpio, 0); // set data low
-		} else {
-			gpiod_set_value(sk9822->data_gpio, 1); // set data high
-		}
-
-		gpiod_set_value(sk9822->clock_gpio, 1); // set clock high, data sampled here
-		c <<= 1;
-		udelay(1); // stretch clock
-		gpiod_set_value(sk9822->clock_gpio, 0); // set clock low
-	}
-
-	// State after call: SCK Low, Data high
-}

gryphon-led-module/src/sk9822_bitbang.h

@@ -1,28 +0,0 @@
-/*
- * Copyright (c) 2017 Genexis B.V.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#ifndef _SK9822_BB_H_
-#define _SK9822_BB_H_
-
-#include <linux/types.h>
-
-#include "sk9822.h"
-
-void sk9822_bb_write(struct sk9822_leds *sk9822, uint8_t c);
-
-#endif /* _SK9822_BB_H_ */

ice-client/Config.in

@@ -0,0 +1,4 @@
+
+config ICE_OPEN
+       bool "Use pre-compiled version for Open SDK"
+       default n

ice-client/files/ice-client.uci_default

@@ -0,0 +1,67 @@
+#!/bin/sh
+
+grep -rq "^ice:" /etc/passwd || {
+	adduser -D -H -s /bin/false ice
+}
+
+uci -q delete passwords.ice
+uci -q set passwords.ice=usertype
+uci -q set passwords.ice.password="\$WPAKEY"
+uci -q add_list passwords.ice._access_r=root
+uci -q commit passwords
+
+uci show rpcd | grep username=.*ice.* >/dev/null || {
+cat >> /etc/config/rpcd << EOF
+
+config login
+	option username 'ice'
+	option password '\$p\$ice'
+	list _access_r 'none'
+	list write 'user-user'
+	list write 'juci-broadcom-dsl'
+	list write 'juci-broadcom-dsl-admin'
+	list write 'juci-broadcom-ethernet'
+	list write 'juci-broadcom-iptv'
+	list write 'juci-broadcom-vlan'
+	list write 'juci-broadcom-vlan-admin'
+	list write 'juci-wireless'
+	list write 'juci-wireless-admin'
+	list write 'juci-catv'
+	list write 'juci-ddns'
+	list write 'juci-diagnostics'
+	list write 'juci-dnsmasq-dhcp'
+	list write 'juci-dropbear'
+	list write 'juci-ethernet'
+	list write 'juci-event'
+	list write 'juci-firewall-fw3'
+	list write 'juci-iconnect'
+	list write 'juci-igmpinfo'
+	list write 'juci-inteno-backup'
+	list write 'juci-inteno-multiwan'
+	list write 'juci-inteno-provisioning'
+	list write 'juci-inteno-qos'
+	list write 'juci-inteno-voice-client'
+	list write 'juci-minidlna'
+	list write 'juci-mod-status'
+	list write 'juci-mod-system'
+	list write 'juci-natalie-dect'
+	list write 'juci-netmode'
+	list write 'juci-network-netifd'
+	list write 'juci-owsd'
+	list write 'juci-printer'
+	list write 'juci-realtime-graphs'
+	list write 'juci-samba'
+	list write 'juci-sfp'
+	list write 'juci-snmpd'
+	list write 'juci-sysupgrade'
+	list write 'juci-uhttpd'
+	list write 'juci-upnp'
+	list write 'juci-usb'
+	list write 'core'
+	list write 'unauthenticated'
+
+EOF
+}
+
+exit 0
+

icgroupd/Makefile

@@ -0,0 +1,46 @@
+#
+# Copyright (C) 2016 Inteno Broadband AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=icgroupd
+PKG_VERSION:=1.0
+PKG_RELEASE:=0
+
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=
+
+PKG_MAINTAINER:=Inteno Broadband AB
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/icgroupd
+  SECTION:=base
+  CATEGORY:=Base system
+  TITLE:=Inteno cgroup daemon
+  DEPENDS:=+uci +busybox
+endef
+
+define Package/icgroupd/description
+	This package contains Intenos cgroup daemon and associated
+	configuration and startup scripts.
+endef
+
+define Build/Compile
+	true
+endef
+
+define Package/icgroupd/install
+	$(INSTALL_DIR) $(1)/sbin $(1)/etc/init.d $(1)/etc/config
+
+	$(INSTALL_CONF) ./files/cgroups.config $(1)/etc/config/cgroups
+	$(INSTALL_BIN) ./files/cgroups.init $(1)/etc/init.d/cgroups
+	$(INSTALL_BIN) ./files/cgroupd $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,icgroupd))
+

icgroupd/files/cgroupd

@@ -0,0 +1,76 @@
+#!/bin/sh
+
+CGBASEDIR=$1
+CGCONFIG=$2
+[ -n "$CGBASEDIR" -a -n "$CGCONFIG" ] || exit 1
+
+[ -r /lib/functions.sh ] || exit 1
+. /lib/functions.sh
+
+CGPROCMAP=/tmp/cgprocmap
+CGPERIOD=3s
+
+DBGLOG=/tmp/cgroupd.log
+DEBUG=0
+
+
+add_to_procmap () {
+	local name_grp=$1
+	local name grp
+
+	name=$(echo $name_grp |awk -F= '{print $1}')
+	grp=$(echo $name_grp |awk -F= '{print $2}')
+
+	echo "($name) $grp" >> $CGPROCMAP
+}
+
+# Read configuration file and create process:group look-up table
+# in /tmp file
+read_config () {
+	local enab
+
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && exit 1
+
+	config_get CGDEFGROUP cgroups defgroup "_undef_"
+	[ "$CGDEFGROUP" == "_undef_" ] && exit 1
+	[ "$DEBUG" == "1" ] && echo "default $CGDEFGROUP" >> $DBGLOG
+
+	echo -n '' > $CGPROCMAP
+	config_list_foreach procmap procmap add_to_procmap
+	[ "$DEBUG" == "1" ] && cat $CGPROCMAP >> $DBGLOG
+}
+
+# Move all process except init from cgroup root to cgroups according
+# to /tmp look-up table
+move_wild_procs () {
+	local wild_procs=$(cat $CGBASEDIR/cgroup.procs)
+	local pid name grp
+
+	for pid in $wild_procs; do
+
+		[ $pid -eq 1 ] && continue
+		if [ -d /proc/$pid ]; then
+
+			name=$(awk '{print $2}' /proc/$pid/stat)
+			grp=$(awk "\$1==\"$name\" {print \$2}" $CGPROCMAP)
+
+			[ "$grp" == "." ] && continue
+			[ -n "$grp" ] || grp=$CGDEFGROUP
+
+			[ "$DEBUG" == "1" ] && \
+			    echo "Moving proc $pid $name to $grp" >> $DBGLOG
+			echo $pid > $CGBASEDIR/$grp/cgroup.procs
+		fi
+	done
+}
+
+
+[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+read_config
+while true; do
+	move_wild_procs
+	sleep $CGPERIOD
+done

icgroupd/files/cgroups.config

@@ -0,0 +1,48 @@
+config cgroups cgroups
+	option enabled 1
+	option defgroup iopsys/normal
+
+config cgroup _root_
+#	list option cpu.rt_runtime_us=50000
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=40000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup iopsys_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=30000
+	list option memory.limit_in_bytes=-1
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=10000
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_normal
+	list option cpu.shares=1024
+#	list option cpu.rt_runtime_us=2500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config cgroup 3prt_high
+	list option cpu.shares=4096
+#	list option cpu.rt_runtime_us=7500
+	list option memory.limit_in_bytes=75M
+	list option memory.move_charge_at_immigrate=1
+
+config procmap procmap
+	list procmap kthreadd=.
+	list procmap minidlna=3prt/normal
+

icgroupd/files/cgroups.init

@@ -0,0 +1,93 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+USE_PROCD=1
+PROCD_DEBUG=1
+NAME=cgroupd
+
+CGBASEDIR=/sys/fs/cgroup
+CGCONFIG="cgroups"
+
+DBGLOG=/tmp/cginit.log
+DEBUG=0
+
+
+cgroupinit_set_knob_value () {
+	local knob_val=$1
+	local dir=$2
+	local knob val
+
+	knob=$(echo $knob_val |awk -F= '{print $1}')
+	val=$(echo $knob_val |awk -F= '{print $2}')
+	/bin/echo $val > $CGBASEDIR/$dir/$knob
+	[ "$DEBUG" == "1" ] && \
+	    echo "/bin/echo $val > $CGBASEDIR/$dir/$knob (ret=$?)" >> $DBGLOG
+}
+
+cgroupinit_create_group () {
+	local cgrp=$1
+	local dir
+
+	[ "$DEBUG" == "1" ] && echo "Create group $cgrp:" >> $DBGLOG
+	if [ "$cgrp" == "_root_" ]; then
+		dir=.
+	else
+		dir=$(echo $cgrp |tr '_' '/')
+
+		if [ ! -d $CGBASEDIR/$dir ]; then
+			mkdir $CGBASEDIR/$dir
+			[ "$DEBUG" == "1" ] && \
+			    echo "mkdir $CGBASEDIR/$dir (ret=$?)" >> $DBGLOG
+		fi
+	fi
+
+	config_list_foreach $cgrp option cgroupinit_set_knob_value $dir
+}
+
+cgroupinit_configure_cgroups () {
+	local enab defgrp
+
+	[ "$DEBUG" == "1" ] && echo "$0 started $(date)" >> $DBGLOG
+	config_load $CGCONFIG
+
+	config_get enab cgroups enabled "1"
+	[ $enab -eq 0 ] && return 1
+
+	config_get defgrp cgroups defgroup "_undef_"
+	[ "$defgrp" == "_undef_" ] && return 1
+
+	if ! grep -q " $CGBASEDIR cgroup " /proc/mounts; then
+		mount -t cgroup -o nodev,noexec,nosuid cgroup $CGBASEDIR
+		[ $? -eq 0 ] || return 1
+	fi
+
+	config_foreach cgroupinit_create_group cgroup
+	return 0
+}
+
+start_service () {
+	cgroupinit_configure_cgroups
+	[ $? -eq 0 ] || return
+
+	procd_open_instance
+	procd_set_param command /sbin/cgroupd $CGBASEDIR $CGCONFIG
+	procd_set_param respawn
+	procd_close_instance
+}
+
+stop_service () {
+	local cgdir procs prc
+
+	for cgdir in $(find $CGBASEDIR -type d -mindepth 1 -depth); do
+		procs=$(cat $cgdir/cgroup.procs)
+		for prc in $procs; do
+			echo $prc > $CGBASEDIR/cgroup.procs
+		done
+		rmdir $cgdir
+	done
+}
+
+service_triggers() {
+        procd_add_reload_trigger $CGCONFIG
+}
+

icwmp/Config_cwmp.in

@@ -0,0 +1,35 @@
+if PACKAGE_icwmp-curl || PACKAGE_icwmp-zstream
+
+config CWMP_SCRIPTS_FULL
+	bool "Install all icwmp scripts"
+	default y
+
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config XMPP_ENABLE
+	bool "enable xmpp feature"
+	default n
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+
+config LIBDATAMODEL_VENDOR_PREFIX
+    string "Vendor Prefix"
+    default "X_Inteno_SE_"
+    
+endif
+

icwmp/Config_datamodel.in

@@ -0,0 +1,7 @@
+if PACKAGE_libdatamodel
+
+config UPNP_TR064
+	bool "Compile with tr064 features"
+	default n
+
+endif

icwmp/Makefile

@@ -1,72 +1,88 @@
 #
-# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
+# Copyright (C) 2012 OpenWrt.org
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.19
-
+PKG_VERSION:=4.0-2018-09-03
+PKG_FIXUP:=autoreconf
+PKG_SOURCE_URL:=http://public.inteno.se:/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=9d8389cda16f410826920bb27fd8af4d28c79de9
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-
+PKG_SOURCE_VERSION:=fe324dbae2c8dbcfb55555dee9b3700280151aa1
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+
+CWMP_REVISION=$(shell svnversion ./src/ -n|cut -f2 -d:)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/libdatamodel
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
+endef
+
+define Package/icwmp_stun
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 stun Client
+	DEPENDS:=+libubus +libuci +libubox +libjson-c +libopenssl +libblobmsg-json
+endef
+
+define Package/icwmp_xmpp
+	SECTION:=utils
+	CATEGORY:=Utilities
+	TITLE:=TR-069 xmpp feature
+	DEPENDS:=+libuci +libubox +libexpat +libstrophe
+endef
+
+define Package/icwmp/Default
   SECTION:=utils
   CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbf_api
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +libexpat +libstrophe +curl +libtrace +libdatamodel
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  VARIANT:=openssl
+define Package/icwmp/description
+ A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp-openssl
-  VARIANT:=wolfssl
+define Package/icwmp-curl
+  $(call Package/icwmp/Default)
+  TITLE+= (using libcurl)
+  DEPENDS+= +libcurl
+  VARIANT:=curl
 endef
 
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  CONFLICTS := icwmp-openssl icwmp-wolfssl
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
+define Package/icwmp-zstream
+  $(call Package/icwmp/Default)
+  TITLE+= (using libzstream)
+  DEPENDS+= +libzstream
+  VARIANT:=zstream
 endef
 
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
+define Package/icwmp-zstream/config
+	source "$(SOURCE)/Config_cwmp.in"
+endef
 
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
+define Package/libdatamodel/config
+	source "$(SOURCE)/Config_datamodel.in"
+endef
 
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
@@ -75,34 +91,151 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
-	$(INSTALL_DIR) $(1)/etc/icwmpd
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libcwmpdm.so $(1)/usr/lib/bbfdm/libcwmpdm.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
-	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
-	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
-	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
-	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
-	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
+ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+TARGET_CFLAGS += -DEX400
+endif
+
+TARGET_CFLAGS += -DCUSTOM_PREFIX=\\\"$(CONFIG_LIBDATAMODEL_VENDOR_PREFIX)\\\"
+
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE -D_AADJ
+
+ifneq ($(CWMP_REVISION)_,_)
+ifneq ($(CWMP_REVISION),exported)
+ifneq ($(CWMP_REVISION),Unversioned directory)
+TARGET_CFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+TARGET_LDFLAGS += "-DCWMP_REVISION=\\\"$(CWMP_REVISION)\\\""
+endif
+endif
+endif
+
+TARGET_LDFLAGS += \
+	-Wl,-rpath-link=$(STAGING_DIR)/usr/lib
+
+CONFIGURE_ARGS += \
+	--with-uci-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubox-include-path=$(STAGING_DIR)/usr/include \
+	--with-libubus-include-path=$(STAGING_DIR)/usr/include
+	
+ifeq ($(CONFIG_UPNP_TR064),y)
+CONFIGURE_ARGS += \
+	--enable-upnptr064
+endif
+	
+ifeq ($(CONFIG_XMPP_ENABLE),y)
+CONFIGURE_ARGS += \
+	--enable-xmpp
+endif
+	
+ifeq ($(BUILD_VARIANT),zstream)
+CONFIGURE_ARGS += \
+	--enable-http=zstream \
+	--with-zstream-include-path=$(STAGING_DIR)/usr/include
+endif
+
+ifeq ($(BUILD_VARIANT),curl)
+CONFIGURE_ARGS += \
+	--enable-http=curl
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/libdatamodel/install
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib/
 endef
 
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
+define Package/icwmp-$(BUILD_VARIANT)/install
+	$(INSTALL_DIR) $(1)/etc/icwmpd
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/icwmpd $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/dmmap $(1)/etc/icwmpd
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_DIR) $(1)/etc/uci-defaults
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmpd.init $(1)/etc/init.d/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/90-cwmpfirewall
+ifeq ($(CONFIG_CWMP_SCRIPTS_FULL),y)
+	$(INSTALL_DIR) $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/defaults $(1)/usr/share/icwmp
+	$(CP) $(PKG_BUILD_DIR)/scripts/functions $(1)/usr/share/icwmp
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/icwmp.sh $(1)/usr/sbin/icwmp
+endif
+	$(CP) ./files/* $(1)/
+endef
 
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+define Package/icwmp_stun/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_stund $(1)/usr/sbin/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_stund $(1)/etc/init.d/icwmp_stund
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_stun $(1)/etc/config
+endef
+
+define Package/icwmp_xmpp/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmp_xmppd $(1)/usr/sbin/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/init/icwmp_xmppd $(1)/etc/init.d/icwmp_xmppd
+	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_CONF) $(PKG_BUILD_DIR)/config/cwmp_xmpp $(1)/etc/config
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/*.h $(1)/usr/include/libdatamodel
+	$(CP) $(PKG_BUILD_DIR)/dm/dmtree/common/root.h $(1)/usr/include/libdatamodel
+	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.so* $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libdatamodel.a $(1)/lib
+endef
+
+
+define Package/icwmp-$(BUILD_VARIANT)/postinst
+	#!/bin/sh
+	echo "$(CWMP_BKP_FILE)" >> $${IPKG_INSTROOT}/etc/sysupgrade.conf
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Enabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd enable
+	fi
+	exit 0
+endef
+
+define Package/icwmp-$(BUILD_VARIANT)/prerm
+	#!/bin/sh
+	if [ -z "$${IPKG_INSTROOT}" ]; then
+		echo "Disabling rc.d symlink for icwmpd"
+		/etc/init.d/icwmpd disable
+	fi
+	exit 0
+endef
+
+
+$(eval $(call BuildPackage,icwmp-curl))
+$(eval $(call BuildPackage,libdatamodel))
+$(eval $(call BuildPackage,icwmp_stun))
+$(eval $(call BuildPackage,icwmp_xmpp))
+$(eval $(call BuildPackage,icwmp-zstream))

icwmp/README

@@ -0,0 +1,136 @@
+1)Build
+    Requirements<74>:
+	librairies:
+	- libuci.so
+	- libexpat.so
+	- libcurl.so
+	- libpthread.so
+	- libopenssl.so
+	- libz.so
+	- libcrypto.so
+	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
+	
+	header files and folders:
+	- expat.h
+	- expat_external.h
+	- uci.h
+	- uci_config.h
+	- zlib.h
+	- curl folder
+	- openssl folder
+	the header files and folders should be present in the staging_dir/target-i386_uClibc-0.9.30.1/usr/include/ or staging_dir/toolchain-i386_gcc-4.1.2_uClibc-0.9.30.1/usr/include/
+
+
+if a librairie doesn't exist:
+ 	a- run make menuconfig and select the librarie
+	b- build the librarie package
+
+2) Build
+
+this software is composed of 3 packages:
+- icwmp package:  contains icwmpd daemon
+- cwmp lib package: contains cwmplib and contains cwmp_value_change binary. They could be used by other user space applications in order to notify the icwmp daemon when paramter changes
+- cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
+
+The three packages should be selected in the make menu config in order to get the three packages compiled.
+To compile the three packages: $ make package/cwmpd/compile 
+
+3) OpenWRT settings
+in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
+ uci_set_state provisioning iup tr069url "$url"
+ uci_set_state provisioning iup provisioningcode "$provisioningcode"
+
+4) Run
+    Requirements:
+	- libuci package should be installed
+	- libexpat package should be installed
+	- libcurl package should be installed
+	- libpthread package should be installed
+	- libopenssl package should be installed
+	- libz package should be installed
+	- libcrypto package should be installed
+    
+    Configure the acs url in the /etc/config/icwmp
+    and then start the cwmpd service: /etc/init.d/icwmpd start
+    for the help: /etc/init.d/icwmpd
+
+5) Value Change
+
+5.1) value change for user space applications (using the libcwmp)
+
+Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
+The libcwmp should be installed uin the OpenWRT firmware
+
+example of using libcwmp
+in myapplication.c
+
+#...
+#include <cwmp_lib.h>
+#...
+
+int anyfunction ()
+{
+   .....
+   /* parameter change here  */
+   /* so we inform the icwmp: */
+   lib_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
+   .....
+/*
+Description of lib_api_cwmp_value_change_call input parameters
+ parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
+ parameter 2 : is the parameter path
+ parameter 3 : is the first correspondence related to the first indice
+ parameter 4 : is the second correspondence related to the second indice
+   .
+   .
+   .
+ parameter n : is the (n-2) correspondence related to the (n-2) indice
+*/
+
+}
+
+5.2) value change for user space applications (using the cwmp_value_change CLI)
+
+Before using the libcwmp, we should check that the libcwmp package is selected in "make menu config". and we should check that the package is compiled.
+The libcwmp should be installed uin the OpenWRT firmware
+
+in OpenWRT:
+
+root@OpenWrt:~# cwmp_value_change InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress "lan2" "3"
+
+in this case the command will force cwmp client to send a notification to the ACS (if and only if the parameter path as configured as active or as passive parameter using the setAttributeParameter method)
+
+5.3) value change for kernel space modules
+Before using the cwmp kernel module for value change, we should check that the kernel module package is selected in "make menu config". and we should check that the package is compiled.
+The kernel module should be installed uin the OpenWRT firmware and should be insert before all other kernel modules
+
+example of using cwmp kernel module
+in mykernelmodule.c
+
+#...
+#include <linux/cwmp_kernel.h>
+#...
+
+int anykernelfunction ()
+{
+   .....
+   /* parameter change here  */
+   /* so we inform the cwmp: */
+   kernel_api_cwmp_value_change_call (3, "InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.IPInterface.{i}.IPInterfaceIPAddress","lan2","3");
+   .....
+/*
+Description of lib_api_cwmp_value_change_call input parameters
+ parameter 1 : is the number of input string in the function lib_api_cwmp_value_change_call
+ parameter 2 : is the parameter path
+ parameter 3 : is the first correspondence related to the first indice
+ parameter 4 : is the second correspondence related to the second indice
+   .
+   .
+   .
+ parameter n : is the (n-2) correspondence related to the (n-2) indice
+*/
+
+}
+
+
+