icwmp: get dhcp 43 option in icwmp hotplug script instead of netifd package

ated/Makefile

@@ -0,0 +1,78 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB. All rights reserved.
+#
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# version 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=ated
+PKG_VERSION:=1.2.2
+PKG_RELEASE:=1
+
+PKG_SOURCE_VERSION:=f614cba983d827d5185c60a6a5a35530621d44d2
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mediatek/ated.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=LICENSE
+
+# support parallel build
+#PKG_BUILD_PARALLEL:=1
+
+#re create configure scripts if not present.
+#PKG_FIXUP:=autoreconf
+
+# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
+# this way we don't need to pick out the resulting files from the build dir.
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/ated
+	CATEGORY:=Utilities
+	TITLE:=Daemon for handling wifi calibration
+	URL:=
+	DEPENDS:= libc
+endef
+
+define Package/ated/description
+	Daemon for handling wifi calibration
+endef
+
+#TARGET_CFLAGS += -I$(LINUX_DIR)/include -I$(LINUX_DIR)/arch/mips/include
+
+MAKE_FLAGS += \
+	v=2 \
+	m=3
+
+
+#TARGET_CPPFLAGS := \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/shared/opensource/include/bcm963xx \
+#	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
+#	$(TARGET_CPPFLAGS)
+
+# we donot wwant to have any install.
+define Build/Install/Default
+endef
+
+define Package/ated/install
+	$(INSTALL_DIR) $(1)/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ated $(1)/sbin/
+endef
+
+$(eval $(call BuildPackage,ated))

bbf/Config_bbfdm.in

@@ -1,3 +1,5 @@
+if PACKAGE_libbbfdm
+
 config BBF_VENDOR_EXTENSION
 	bool "Enable Vendor Extension"
 	default y
@@ -10,6 +12,10 @@ config BBF_VENDOR_PREFIX
 	string "Vendor Prefix"
 	default "X_IOPSYS_EU_"
 
+config BBF_TR181
+	bool "Enable TR-181 Data Model Support"
+	default y
+
 config BBF_TR104
 	bool "Enable TR-104 Data Model Support"
 	default y
@@ -18,18 +24,4 @@ config BBF_TR143
 	bool "Enable TR-143 Data Model Support"
 	default y
 
-config BBF_TR471
-	bool "Enable TR-471 Data Model Support"
-	default y
-
-config BBFDM_ENABLE_JSON_PLUGIN
-	bool "Enable json plugin to extend datamodel"
-	default y
-
-config BBFDM_ENABLE_DOTSO_PLUGIN
-	bool "Enable shared library plugin to extend datamodel"
-	default y
-
-config BBF_MAX_OBJECT_INSTANCES
-	int "Maximum number of instances per object"
-	default 255
+endif

bbf/Makefile

@@ -1,82 +1,41 @@
 #
-# Copyright (C) 2022 IOPSYS
+# Copyright (C) 2021 IOPSYS
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libbbfdm
-PKG_VERSION:=6.8.49
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=6.0.6
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bbf.git
-PKG_SOURCE_VERSION:=87ae46df8b4e221b8894fd861d2eb785ae1f3bf3
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=9842552d421adb529b8771b8f9dc41ddc89f5b62
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 PKG_LICENSE:=LGPL-2.1
 PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
 define Package/libbbf_api
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=BBF datamodel library, provides API to extend datamodel using DotSO plugins
-  ABI_VERSION:=1.0
-endef
-
-define Package/libbbfdm/default
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Library for broadband forum data model support
-  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libcurl +libbbf_api \
-	    +BBF_TR471:obudpst
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=BBF
+  TITLE:=Library for libbbfdm API
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c
 endef
 
 define Package/libbbfdm
-  $(Package/libbbfdm/default)
-  TITLE += (internal)
-  VARIANT:=internal
-endef
-
-define Package/libbbfdm-mbedtls
-  $(Package/libbbfdm/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_libbbfdm-mbedtls:libmbedtls
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-define Package/libbbfdm-openssl
-  $(Package/libbbfdm/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_libbbfdm-openssl:libopenssl
-  CONFLICTS := libbbfdm-mbedtls
-  VARIANT:=openssl
-endef
-
-define Package/libbbfdm-wolfssl
-  $(Package/libbbfdm/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_libbbfdm-wolfssl:libwolfssl
-  CONFLICTS := libbbfdm-mbedtls libbbfdm-openssl
-  VARIANT:=wolfssl
-endef
-
-define Package/userinterface
-  SECTION:=utils
-  CATEGORY:=Utilities
-  SUBMENU:=TRx69
-  TITLE:=Package to add Device.UserInterface. datamodel support
-endef
-
-define Package/userinterface/description
-  Package to add Device.UserInterface. datamodel support using libbbf JSON Plugin
+  SECTION:=libs
+  CATEGORY:=Libraries
+  SUBMENU:=BBF
+  TITLE:=Library for broadband-forum data model
+  DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c +libtrace +libbbf_api +libopenssl +libcurl
 endef
 
 define Package/libbbfdm/config
@@ -98,116 +57,71 @@ define Build/Prepare
 endef
 endif
 
-CMAKE_OPTIONS += \
-	-DBBF_TR181=ON
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	-Wall -Werror \
+
+ifeq ($(CONFIG_BBF_TR181),y)
+CONFIGURE_ARGS += \
+	--enable-tr181
+endif
 
 ifeq ($(CONFIG_BBF_TR104),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR104=ON
+CONFIGURE_ARGS += \
+	--enable-tr104
 endif
 
 ifeq ($(CONFIG_BBF_TR143),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR143=ON
+CONFIGURE_ARGS += \
+	--enable-tr143
 endif
 
-ifeq ($(CONFIG_BBF_TR471),y)
-CMAKE_OPTIONS += \
-	-DBBF_TR471=ON
+ifeq ($(CONFIG_PACKAGE_libopenssl),y)
+CONFIGURE_ARGS += \
+	--enable-libopenssl
 endif
 
 ifeq ($(CONFIG_BBF_VENDOR_EXTENSION),y)
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_EXTENSION=ON
+CONFIGURE_ARGS += \
+	--enable-vendor-extension
 
-CMAKE_OPTIONS += \
-	-DBBF_VENDOR_LIST:String="$(CONFIG_BBF_VENDOR_LIST)" \
-	-DBBF_VENDOR_PREFIX:String="$(CONFIG_BBF_VENDOR_PREFIX)" \
-	-DBBF_MAX_OBJECT_INSTANCES:Integer=$(CONFIG_BBF_MAX_OBJECT_INSTANCES)
+CONFIGURE_ARGS += \
+	BBF_VENDOR_LIST="$(CONFIG_BBF_VENDOR_LIST)" \
+	BBF_VENDOR_PREFIX="$(CONFIG_BBF_VENDOR_PREFIX)"
 
 endif ##CONFIG_BBF_VENDOR_EXTENSION
 
-ifeq ($(CONFIG_BBFDM_ENABLE_JSON_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_JSON_PLUGIN=ON
-endif
-
-ifeq ($(CONFIG_BBFDM_ENABLE_DOTSO_PLUGIN),y)
-CMAKE_OPTIONS += \
-	-DBBF_DOTSO_PLUGIN=ON
-endif
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
 define Package/libbbf_api/install
 	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.so* $(1)/lib/
 endef
 
-define Package/libbbfdm/default/install
+define Package/libbbfdm/install
 	$(INSTALL_DIR) $(1)/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.so* $(1)/lib/
+	$(INSTALL_DIR) $(1)/usr/share/bbfdm
+	$(CP) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm
 	$(INSTALL_DIR) $(1)/etc/bbfdm/dmmap
 	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/usr/share/bbfdm
 	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_DIR) $(1)/usr/libexec/rpcd
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/scripts/* $(1)/usr/share/bbfdm
-	$(LN) /usr/share/bbfdm/bbf.diag $(1)/usr/libexec/rpcd/bbf.diag
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/bbf $(1)/lib/upgrade/keep.d/bbf
 endef
 
-define Package/libbbfdm/default/prerm
+define Package/libbbfdm/prerm
 	#!/bin/sh
-	rm -rf /etc/bbfdm/dmmap/*
+	rm -rf /etc/bbfdm/*
 	exit 0
 endef
 
-define Package/userinterface/install
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_DIR) $(1)/etc/config
-	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/UserInterface.json $(1)/etc/bbfdm/json/
-	$(INSTALL_DATA) ./files/etc/config/userinterface $(1)/etc/config/userinterface
-	$(INSTALL_BIN) ./files/etc/init.d/userinterface $(1)/etc/init.d/userinterface
-	$(INSTALL_BIN) ./files/etc/uci-defaults/93-userinterface-firewall $(1)/etc/uci-defaults/93-userinterface-firewall
-	$(INSTALL_BIN) ./files/etc/firewall.userinterface $(1)/etc/firewall.userinterface
-endef
-
-Package/libbbfdm-openssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-wolfssl/prerm = $(Package/libbbfdm/default/prerm)
-Package/libbbfdm-mbedtls/prerm = $(Package/libbbfdm/default/prerm)
-
-Package/libbbfdm-openssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-wolfssl/install = $(Package/libbbfdm/default/install)
-Package/libbbfdm-mbedtls/install = $(Package/libbbfdm/default/install)
-
 define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/include/libbbfdm
 	$(INSTALL_DIR) $(1)/usr/include/libbbf_api
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/include/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
-	$(CP) $(PKG_BUILD_DIR)/libbbfdm.so $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/*.h $(1)/usr/include/libbbfdm/
+	$(CP) $(PKG_BUILD_DIR)/libbbf_api/*.h $(1)/usr/include/libbbf_api/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbfdm.{a,so*} $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/bin/.libs/libbbf_api.{a,so*} $(1)/usr/lib/
 endef
 
-$(eval $(call BuildPackage,userinterface))
 $(eval $(call BuildPackage,libbbf_api))
 $(eval $(call BuildPackage,libbbfdm))
-$(eval $(call BuildPackage,libbbfdm-openssl))
-$(eval $(call BuildPackage,libbbfdm-wolfssl))
-$(eval $(call BuildPackage,libbbfdm-mbedtls))

bbf/files/etc/bbfdm/json/UserInterface.json

@@ -1,117 +0,0 @@
-{
-	"Device.UserInterface.": {
-		"type": "object",
-		"version": "2.0",
-		"protocols": [
-			"cwmp",
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"Device.UserInterface.RemoteAccess.": {
-			"type": "object",
-			"version": "2.0",
-			"protocols": [
-				"cwmp",
-				"usp"
-			],
-			"access": false,
-			"array": false,
-			"Enable": {
-				"type": "boolean",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "enable"
-							}
-						}
-					}
-				]
-			},
-			"Port": {
-				"type": "unsignedInt",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"range": [
-					{
-						"max": 65535
-					}
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "port"
-							}
-						}
-					}
-				]
-			},
-			"SupportedProtocols": {
-				"type": "string",
-				"read": true,
-				"write": false,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"list": {
-					"datatype": "string",
-					"enumerations": [
-						"HTTP",
-						"HTTPS"
-					]
-				},
-				"default": "HTTP"
-			},
-			"Protocol": {
-				"type": "string",
-				"read": true,
-				"write": true,
-				"version": "2.0",
-				"protocols": [
-					"cwmp",
-					"usp"
-				],
-				"mapping": [
-					{
-						"type": "uci", 
-						"uci": {
-							"file": "userinterface", 
-							"section": {
-								"name": "remote_access"
-							}, 
-							"option": {
-								"name": "protocol"
-							}
-						}
-					}
-				]
-			}
-		}
-	}
-}

bbf/files/etc/config/userinterface

@@ -1,6 +0,0 @@
-config userinterface 'remote_access'
-	option enable '0'
-	option interface 'wan'
-	option port '80'
-	option protocol 'HTTP'
-

bbf/files/etc/firewall.userinterface

@@ -1,85 +0,0 @@
-#!/bin/sh
-
-
-#!/bin/sh
-
-. /lib/functions.sh
-
-IDENTIFIER="REMOTE-ACCESS-WAN"
-
-log() {
-	echo "${@}"|logger -t firewall.userinterface -p info
-}
-
-if [ ! -f "/etc/config/userinterface" ]; then
-	exit 0;
-fi
-
-exec_cmd() {
-	if ! "$@"; then
-		log "Failed to run [$*]"
-	fi
-}
-
-configure_firewall_rule() {
-	local enable port protocol gui_port
-	local zone interface
-
-	config_load userinterface
-	config_get_bool enable remote_access enable 1
-	config_get port remote_access port
-	config_get interface remote_access interface
-
-	if [ "${enable}" -eq "0" ] || [ -z "${port}" ] || [ -z "${interface}" ]; then
-		return 0;
-	fi
-
-	zone="zone_${interface}_input"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate NEW,ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-
-	zone="zone_${interface}_output"
-	iptables -w 1 -t filter -nL "${zone}" 2>/dev/null 1>&2
-	if [ "$?" -eq 0 ]; then
-		iptables -w 1 -I "${zone}" -p tcp -m multiport --dports "${port}" -m conntrack --ctstate ESTABLISHED -m comment --comment "${IDENTIFIER}" -j ACCEPT
-	fi
-}
-
-delete_firewall_rule() {
-	local zone interface
-	local CMD
-
-	config_load userinterface
-	config_get interface remote_access interface
-
-	# Clean remote interface rules
-	if [ -z "${interface}" ]; then
-		return 0
-	fi
-
-	zone="zone_${interface}_input"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-
-	zone="zone_${interface}_output"
-	CMD="iptables -w 1 -t filter -nL ${zone} --line-numbers"
-	while ${CMD} 2>/dev/null | grep "${IDENTIFIER}"; do
-		rule_num="$(${CMD} | grep "${IDENTIFIER}" | head -1|awk '{print $1}')"
-		if [ -n "${rule_num}" ]; then
-			exec_cmd iptables -w 1 -t filter -D "${zone}" "${rule_num}";
-		fi
-	done
-}
-
-# Delete existing remote access rules
-delete_firewall_rule
-
-# Configure the User Interface rule
-configure_firewall_rule

bbf/files/etc/init.d/userinterface

@@ -1,27 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=01
-
-USE_PROCD=1
-
-start_service() {
-	local enable
-
-	procd_open_instance usp
-
-	config_load userinterface
-	config_get_bool enable global enable 1
-
-	# Inject firewall rules
-	if [ "${enable}" -eq "1" ]; then
-		/etc/firewall.userinterface
-	fi
-
-	procd_close_instance
-}
-
-service_triggers()
-{
-	procd_add_reload_trigger "userinterface"
-}

bbf/files/etc/uci-defaults/93-userinterface-firewall

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-uci -q batch <<-EOT
-        delete firewall.userinterface
-        set firewall.userinterface=include
-        set firewall.userinterface.path=/etc/firewall.userinterface
-        set firewall.userinterface.reload=1
-        commit firewall
-EOT
-
-exit 0
-

bbf/files/lib/upgrade/keep.d/bbf

@@ -1 +0,0 @@
-/etc/bbfdm/sysctl.conf

bulkdata/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2022 iopsys Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,17 +8,14 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=bulkdata
-PKG_VERSION:=2.0.10
+PKG_VERSION:=1.0.2
 
-LOCAL_DEV:=0
-ifneq ($(LOCAL_DEV),1)
+PKG_SOURCE_VERSION:=150eb3122c969d1646c8ca8c8152154990f91823
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/bulkdata.git
-PKG_SOURCE_VERSION:=6e85d2032e66df581fae7c72cd83cc89367b8fc8
+
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
-endif
-
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
@@ -32,24 +29,21 @@ define Package/$(PKG_NAME)
   CATEGORY:=Utilities
   SUBMENU:=TRx69
   TITLE:=BBF BulkData Collection
-  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +libblobmsg-json +zlib
+  DEPENDS:=+libubus +libuci +libubox +libjson-c +libcurl +curl +libblobmsg-json +libbbfdm +libbbf_api
+endef
+
+define Package/$(PKG_NAME)/description
+	BBF BulkData Collection
 endef
 
 TARGET_CFLAGS += \
-	-D_GNU_SOURCE \
-	-Wall -Werror
-
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-	$(CP) -rf ~/git/bulkdata/* $(PKG_BUILD_DIR)/
-endef
-endif
+	-D_GNU_SOURCE
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bulkdatad $(1)/usr/sbin/
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bbf_plugin/*.json $(1)/etc/bbfdm/json
+	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/*.so $(1)/usr/lib/bbfdm
 	$(CP) ./files/* $(1)/
 endef
 

bulkdata/files/etc/config/bulkdata

@@ -1,6 +1,43 @@
 
 config bulkdata 'bulkdata'
 	option enable '0'
-	#Log levels: Error=1, Warning=2, Info=3, Debug=4
+	#Log levels: Critical=0, Warning=1, Notice=2, Info=3, Debug=4
 	option log_level '3'
 
+config profile
+	option profile_id '1'
+	option enable '0'
+	option name ''
+	option nbre_of_retained_failed_reports '0'
+	option protocol 'http'
+	option encoding_type ''
+	option reporting_interval '86400'
+	option time_reference '0'
+	option csv_encoding_field_separator ','
+	option csv_encoding_row_separator '
'
+	option csv_encoding_escape_character '"'
+	option csv_encoding_report_format 'column'
+	option csv_encoding_row_time_stamp 'unix'
+	option json_encoding_report_format 'objecthierarchy'
+	option json_encoding_report_time_stamp 'unix'
+	option http_url ''
+	option http_username ''
+	option http_password ''
+	option http_compression 'none'
+	option http_method 'post'
+	option http_use_date_header '1'
+	option http_retry_enable '0'
+	option http_retry_minimum_wait_interval '5'
+	option http_retry_interval_multiplier '2000'
+	option http_persist_across_reboot '0'
+
+config profile_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+
+config profile_http_request_uri_parameter
+	option profile_id '1'
+	option name ''
+	option reference ''
+

bulkdata/files/etc/init.d/bulkdatad

@@ -1,4 +1,7 @@
 #!/bin/sh /etc/rc.common
+# Bulkdata Software
+# Copyright (C) 2020 iopsys Software Solutions AB
+# Author: Amin Ben Ramdhane <amin.benramdhane@pivasoftware.com>
 
 START=99
 STOP=10
@@ -7,17 +10,17 @@ USE_PROCD=1
 PROG="/usr/sbin/bulkdatad"
 
 start_service() {
-	local enable
-
-	config_load bulkdata
-	config_get_bool enable bulkdata enable 1
-
-	procd_open_instance bulkdata
-	[ "$enable" -eq "1" ] && {
+	local bulkdata_enable=`uci -q get bulkdata.bulkdata.enable`
+	if [ "$bulkdata_enable" = "1" ]; then
+		procd_open_instance
 		procd_set_param command "$PROG"
 		procd_set_param respawn "3" "7" "0"
-	}
-	procd_close_instance
+		procd_close_instance
+	fi
+}
+
+boot() {
+	start
 }
 
 reload_service() {

bulkdata/files/etc/uci-defaults/95-bulkdata-translation-options

@@ -1,75 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-PROFILE_COUNT=1
-
-get_next_count()
-{
-	local config="$1"
-	local default_name="${2}"
-	local count=${3}
-	local found=0
-
-	if [ -z "$count" ]; then
-		count=1
-	fi
-
-	while [ "${found}" -ne 1 ]; do
-		uci -q get "${config}"."${default_name}"_${count} >/dev/null
-		if [ "$?" -eq 0 ]; then
-			count=$((count + 1))
-		else
-			found=1;
-		fi
-	done
-
-	echo "${default_name}_${count}"
-}
-
-translate_profile_id_to_profile_name() {
-	local section="${1}"
-	local profile_id="${2}"
-	local profile_name="${3}"
-	local curr_profile_id
-
-	config_get curr_profile_id "${section}" profile_id
-
-	[ -n "${curr_profile_id}" ] || return
-	
-	[ "${curr_profile_id}" != "${profile_id}" ] && return
-
-	uci -q set bulkdata."${section}".profile_name="${profile_name}"
-	uci -q set bulkdata."${section}".profile_id=""
-}
-
-update_profile_sections() {
-	local section="${1}"
-	local default="${2}"
-	local profile_name
-
-	config_get profile_id "${section}" profile_id
-
-	[ -n "${profile_id}" ] || return
-
-	case "${section}" in
-		"cfg"*)
-			profile_name="$(get_next_count bulkdata "${default}" ${PROFILE_COUNT})"
-			uci_rename bulkdata "${section}" "${profile_name}"
-		;;
-	esac
-	PROFILE_COUNT=$((PROFILE_COUNT + 1))
-
-	[ -n "$profile_name" ] && section="${profile_name}"
-
-	uci -q set bulkdata."${section}".profile_id=""
-
-	config_foreach translate_profile_id_to_profile_name profile_parameter "${profile_id}" "${profile_name}"
-	config_foreach translate_profile_id_to_profile_name profile_http_request_uri_parameter "${profile_id}" "${profile_name}"
-}
-
-config_load bulkdata
-config_foreach update_profile_sections profile profile
-uci commit bulkdata
-
-exit 0

crashlog/Makefile

@@ -0,0 +1,40 @@
+#
+# Copyright (C) 2019 iopsys Software Solutions AB
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crashlog
+PKG_VERSION:=1.0.0
+PKG_RELEASE:=1
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=none
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crashlog
+  CATEGORY:=Utilities
+  TITLE:=Handling kernel crash logs
+endef
+
+define Package/crashlog/description
+	Handling kernel crash logs.
+endef
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./files/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+endef
+
+define Package/crashlog/install
+	$(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,crashlog))

crashlog/files/etc/init.d/corelog

@@ -0,0 +1,11 @@
+#!/bin/sh /etc/rc.common
+
+START=01
+
+start()
+{
+    if [ -e /proc/sys/kernel/core_pattern ]
+    then
+	echo "|/sbin/logcore %e %s" > /proc/sys/kernel/core_pattern
+    fi
+}

crashlog/files/etc/init.d/crashlog

@@ -0,0 +1,55 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+send_log()
+{
+	nr=$(db get hw.board.serial_number)
+	hw=$(db get hw.board.model_name)
+	fam=$(db get hw.board.iopVerFam)
+	sw=$(db get hw.board.iopVersion)
+	server=$(/sbin/uci get system.crashlog.server)
+
+	while true
+	do
+	    scp  -S /usr/sbin/logssh /proc/last_kmsg log@${server}:log/${fam}_${hw}_${sw}_${nr}
+	    if [ $? == 0 ]
+	    then
+	       break;
+	    fi
+	    # wait for another minute then try again
+	    sleep 60
+	done
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=crashlog
+    /sbin/uci set system.crashlog.enable=no
+    /sbin/uci set system.crashlog.server="crashlog.iopsys.eu"
+    /sbin/uci commit
+}
+
+boot()
+{
+    # is crashlog enabled ?
+    enable=$(/sbin/uci get system.crashlog.enable)
+    case $enable in
+	0|no|NO|false|FALSE)
+	    exit 0
+	    ;;
+	"")
+	    fill_in_default
+	    exit 0
+	    ;;
+    esac
+
+    # is this boot a result from a crash ?
+    reason=$(cat /etc/boot_reason)
+    case $reason in
+	HW|WD)
+	    send_log&
+	    ;;
+    esac
+}

crashlog/files/sbin/logcore

@@ -0,0 +1,60 @@
+#! /bin/sh
+
+TMP_CORE=/tmp/new_core
+# first test if we can contact the log server.
+# if not abort directly the core file takes up memory
+alive()
+{
+	ping -c1 $server
+
+	if [ $? != 0 ]
+	then
+		# drain core file from kernel
+		cat >/dev/null
+		exit 0
+	fi
+}
+
+fill_in_default()
+{
+    /sbin/uci add system log
+    /sbin/uci rename system.@log[-1]=corelog
+    /sbin/uci set system.corelog.enable=no
+    /sbin/uci set system.corelog.server="corelog.iopsys.eu"
+    /sbin/uci commit
+}
+
+# is corelog enabled ?
+enable=$(/sbin/uci get system.corelog.enable)
+case $enable in
+    0|no|NO|false|FALSE)
+	# drain core file from kernel
+	cat >/dev/null
+	exit 0
+	;;
+    "")
+	fill_in_default
+	exit 0
+	;;
+esac
+
+server=$(/sbin/uci get system.corelog.server)
+
+alive
+
+# dump out the core to disk we need this as scp needs a size before we send data
+# and this is the only way to know how much data there is
+cat >$TMP_CORE
+
+# in case filesystem/memory is full at least kill the core in the kernel memory should give us some
+# more memory to work with. normally this would do nothing.
+cat >/dev/null
+
+nr=$(db get hw.board.serial_number)
+hw=$(db get hw.board.model_name)
+fam=$(hw.board.iopVerFam)
+sw=$(db get hw.board.iopVersion)
+
+scp -S /usr/sbin/logssh $TMP_CORE log@${server}:log/core_${1}_${2}_${fam}_${hw}_${sw}_${nr}
+rm $TMP_CORE
+

crashlog/files/usr/sbin/logssh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# we need to have the -y option to dropbear to not halt the scp when
+# transfering the log file to a new server for the first time.
+# since we already need this also put in the keyfile
+
+ssh -y -i /etc/dropbear/logid $@

crashlog/readme

@@ -0,0 +1,42 @@
+Install scp server.
+
+Create a user account on a server and make sure it's possible to login to it
+using ssh.
+
+For now the user has to be called "log"
+
+USER is the user name of the account
+HOME is the user home directory.
+Both should be changed to the correct value in all following example commands.
+
+create HOME/bin
+Put scp_upload in HOME/bin
+make it executable "chmod a+x HOME/bin/scp_upload" 
+
+create home/.ssh   (observer the dot .shh)
+
+create an empty file HOME/.ssh/authorized_keys
+
+-------------------------------
+Now everyhting is setup for use but we have not added any clients.
+What we need is the public key for the clients.
+
+For dropbear "dropbearkey -y -f files/etc/dropbear/logid" will generate the public key.
+
+----------
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCwn9RaDAzxW1dTmIhXgFBnpi1lhj8xhYpCVQiPxxdk9IEmH8zjo4y9j3sPkqKOlRnkwjpZIpLEKBnpQTwVIMCU/AG7nDJX3OH9RfS9mLJQLfFL8HyGCyqDezFWldbyovhJZvdUeK4tAXJWv2W3OVHiz2L8IlncBgP/E9DJElsyhhQHsM96UE6tBkXsvXkoDbMSYXFcLbgiUwBKfmM2BF/aPDL45iznGur7/2j9v95PwJ0gtMu9jjNRq+pXCXhTh3bsnczm0MpZC1aiRc9nJAeGIMmhrf15E4jBKgTnrstzJxGVAdajKeR954KcNsS33cS2Wmui2YjmPbBXjqf1frzJ log@iopsys
+----------
+
+The public key should be just one line. Add that line to the 
+HOME/.ssh/authorized_keys file on the scp server. Then add the follwoing as
+the first text on the same line. that is insert before the key data.
+
+command="HOME/bin/scp_upload",no-port-forwarding,no-agent-forwarding,no-X11-forwarding 
+
+Do not forget to change HOME to the correct value for the server and there 
+should be one space separating the key data and the above text.
+---------------------------------
+Now test to make sure that you can upload new files, not download files
+and not overwrite files from the client.
+
+

crashlog/scp_upload

@@ -0,0 +1,53 @@
+#! /bin/bash
+# authorized_keys command="/home/boxi/my_scp",no-port-forwarding,no-agent-forwarding,no-X11-forwarding
+
+val=`expr match "$SSH_ORIGINAL_COMMAND" "scp"`
+if [ $val != 3 ]
+then
+    echo "only scp is allowed for this rsa key"
+    exit 1
+fi
+
+#strip out "scp" as getopts barf on anything not an option
+
+args=${SSH_ORIGINAL_COMMAND:3}
+
+# we must set args to positional paramters otherwise it's next to impossible
+# to get to the rest of the line that is not arguments.
+
+set -- $args
+while getopts "rftdvpq" Option
+do
+  case $Option in
+    r ) echo "recursive not allowed";exit 1;;
+    f ) echo "reading files not allowed";exit 1;;
+    t ) ;;
+    d ) ;;
+    v ) ;;
+    p ) ;;
+    q ) ;;
+    * ) ;;   # Default.
+  esac
+done
+
+shift $(($OPTIND - 1))
+
+file="$*"
+dir=$(dirname "$file")
+
+if [ "$dir" != "log" ]
+then
+    echo "only allowed to write to log/"
+    exit 1
+fi
+
+# try to create uniq files
+EXTRA=$((0))
+while [ -e "${file}_${EXTRA}" ]
+do
+    EXTRA=$((EXTRA +1))
+done
+
+logger -t scp_upload "${SSH_ORIGINAL_COMMAND}_${EXTRA}"
+
+exec ${SSH_ORIGINAL_COMMAND}_${EXTRA}

crun/Makefile

@@ -0,0 +1,81 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=crun
+PKG_VERSION:=0.20
+PKG_RELEASE:=$(AUTORELEASE)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://github.com/containers/crun.git
+PKG_SOURCE_DATE:=2021-06-07
+PKG_SOURCE_VERSION:=8d6a8b5ab80461cfed19f020a36584af13c32038
+PKG_MIRROR_HASH:=9ca1f0e530b33ce8820bd03329eb6731c5050d6e7f35bd2463d9a81cc00382e0
+
+PKG_BUILD_DEPENDS:=argp-standalone
+PKG_BUILD_PARALLEL:=1
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+PKG_MAINTAINER:=Oskari Rauta <oskari.rauta@gmail.com>
+PKG_LICENSE:=GPL-2.0-or-later
+PKG_LICENSE_FILES:=COPYING
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/crun
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=crun
+  URL:=https://github.com/containers/crun
+  DEPENDS:=@!arc +libseccomp +libcap
+endef
+
+define Package/crun/description
+  A fast and low-memory footprint OCI Container Runtime fully written in C.
+endef
+
+CONFIGURE_ARGS+= \
+	--disable-systemd \
+	--enable-embedded-yajl \
+	--enable-caps \
+	--enable-dl \
+	--enable-seccomp \
+	--enable-bpf
+
+define Build/Prepare
+	$(call Build/Prepare/Default)
+	$(SED) '/#include <git-version.h>/d' $(PKG_BUILD_DIR)/src/crun.c
+endef
+
+define Build/Configure
+	$(call Build/Configure/Default)
+
+	$(SED) '/#define PACKAGE \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define GIT_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_BUGREPORT \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_NAME \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_STRING \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_TARNAME \"/d' $(PKG_BUILD_DIR)/config.h
+	$(SED) '/#define PACKAGE_VERSION \"/d' $(PKG_BUILD_DIR)/config.h
+
+	echo "#define PACKAGE \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_NAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_VERSION \"$(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_STRING \"$(PKG_NAME) $(PKG_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_TARNAME \"$(PKG_NAME)\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define PACKAGE_BUGREPORT \"bugs@openwrt.org\"" >> $(PKG_BUILD_DIR)/config.h
+	echo "#define GIT_VERSION \"$(PKG_SOURCE_VERSION)\"" >> $(PKG_BUILD_DIR)/config.h
+endef
+
+define Package/crun/install
+	$(INSTALL_DIR) $(1)/usr/bin/
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/crun $(1)/usr/bin/
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libcrun.* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,crun))

dectmngr/Config.in

@@ -1,11 +0,0 @@
-if PACKAGE_dectmngr
-
-menu "Configuration"
-
-config ENABLE_LINE_SETTINGS_EXTENSION
-	bool "Enable Line Settings List extension "
-	default y
-
-endmenu
-
-endif

dectmngr/Makefile

@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dectmngr
 PKG_RELEASE:=3
-PKG_VERSION:=3.5.7
+PKG_VERSION:=3.1.18
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/dectmngr.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=83f89a83cf860bbcf2b7f2e030215db315a5bbbf
+PKG_SOURCE_VERSION:=0e937cfb839f845cf28922c4dde0572ec2842f85
 PKG_MIRROR_HASH:=skip
 endif
 
@@ -34,41 +34,29 @@ include $(INCLUDE_DIR)/package.mk
 define Package/$(PKG_NAME)
 	CATEGORY:=Utilities
  	TITLE:=DECT Manager
-	DEPENDS:= +libubox +ubus +uci +libxml2 +libjson-c
+	DEPENDS:= +libubox +ubus +uci
 endef
 
 define Package/$(PKG_NAME)/description
 	DECT manager is a daemon that provides UBUS RPC objects and sends UBUS events for communication with the DECT chip.
 endef
 
-define Package/$(PKG_NAME)/config
-	source "$(SOURCE)/Config.in"
-endef
-
 ifeq ($(LOCAL_DEV),1)
 define Build/Prepare
 	rsync -av --exclude=.* ~/git/voip/dectmngr/* $(PKG_BUILD_DIR)/
 endef
 endif
 
-TARGET_CFLAGS += \
-	-Wall \
-        -Werror \
-	-I$(STAGING_DIR)/usr/include/libxml2
-
-ifeq ($(CONFIG_ENABLE_LINE_SETTINGS_EXTENSION),y)
-TARGET_CFLAGS += -DENABLE_LINE_SETTINGS_EXTENSION
-endif
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
 
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc
-	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/app/dectmngr $(1)/usr/sbin/
 	$(STRIP) $(1)/usr/sbin/dectmngr
 	$(CP) ./files/etc/* $(1)/etc/
-	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/dect $(1)/lib/upgrade/keep.d/dect
 endef
 
 $(eval $(call BuildPackage,$(PKG_NAME)))

dectmngr/files/etc/config/dect

@@ -1,3 +1,2 @@
 config dect 'global'
- 	option log_dect_cmbs 'syslog'
-        option log_level 'realtime,warning,error'
+	option log_dect_cmbs '0'

dectmngr/files/etc/init.d/dectmngr

@@ -11,8 +11,6 @@ PROG=/usr/sbin/dectmngr
 LOG_PATH=/var/log/dectmngr
 DB_PATH=/etc/dect
 
-DECT_GPIO=$(db -q get hw.board.dect_gpio)
-
 # Ask dectmngr to exit nicely and wait for it to clean up, which is a slow process.
 stop_and_wait_dectmngr() {
 	pidof $NAME && killall -q $NAME
@@ -28,42 +26,32 @@ start_service() {
 	local opt_ext=
 	local rfpi=
 	local model_id=
-	local rxtun=
 
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 1 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio14/value
 
 	rfpi=$(db -q get hw.board.dect_rfpi)
 	[ -n "$rfpi" -a ${#rfpi} -eq 14 ] && opt_ext="$opt_ext -rfpi $rfpi"
 
-	model_id=$(db -q get hw.board.dect_model_id)
-	[ -n "$model_id" -a ${#model_id} -eq 8 ] || {
-		echo "Invalid hw.board.dect_model_id:$model_id. Set to 30.3B.06"
-		model_id="30.3B.06"
-	}
-	opt_ext="$opt_ext -model $model_id"
-
-	rxtun=$(db -q get hw.board.dect_rxtun)
-	[ -n "$rxtun" -a ${#rxtun} -eq 2 ] && opt_ext="$opt_ext -rxtun $rxtun"
+	# model_id=$(db -q get hw.board.dect_model_id)
+	# Setting model_id to 0x010203 is a workaround to reduce synchronisation time of some handset
+	# TODO: remove below line and uncomment the line above to get value from db when the problem is solved
+	model_id="01.02.03"
+	[ -n "$model_id" -a ${#model_id} -eq 8 ] && opt_ext="$opt_ext -model $model_id"
 
 	config_load dect
-	config_get log_dect_cmbs global log_dect_cmbs syslog
+	config_get_bool log_dect_cmbs global log_dect_cmbs 0
 
 	procd_open_instance
-	if [ "$log_dect_cmbs" = "none" ]; then
+	if [ $log_dect_cmbs -eq 0 ]; then
 		echo "Starting dectmngr with cmbs logging disabled"
 		procd_set_param command $PROG -comname ttyH0 $opt_ext
 		rm -f $LOG_PATH/*
-	elif [ "$log_dect_cmbs" = "file" ]; then
-		echo "Starting dectmngr with cmbs logging enabled to file"
-		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
 	else
-		echo "Starting dectmngr with cmbs logging enabled to syslog"
-		procd_set_param command $PROG -comname ttyH0 -syslog $opt_ext
-		rm -f $LOG_PATH/*
+		echo "Starting dectmngr with cmbs logging enabled"
+		procd_set_param command $PROG -comname ttyH0 -log $LOG_PATH/dect-cmbs.log $opt_ext
 	fi
-
 	procd_set_param respawn 6 2 3
 	procd_set_param term_timeout 20
 	procd_set_param triggers asterisk
@@ -73,25 +61,23 @@ start_service() {
 stop_service() {
 	test $(db get hw.board.hasDect) = "0" && return
 
-	[ -n "$DECT_GPIO" ] && echo 0 > /sys/class/gpio/gpio${DECT_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio14/value
 	stop_and_wait_dectmngr
 }
 
 reload_service() {
-	ubus call dect reload
+	stop_and_wait_dectmngr
+	start
 }
 
 service_triggers()
 {
-	procd_add_config_trigger "config.change" "asterisk" /etc/init.d/dectmngr restart
-	procd_add_config_trigger "config.change" "dect" /etc/init.d/dectmngr reload
+	procd_add_reload_trigger asterisk dect
 }
 
 boot() {
-	[ -n "$DECT_GPIO" ] && {
-		echo ${DECT_GPIO} > /sys/class/gpio/export
-		echo out > /sys/class/gpio/gpio${DECT_GPIO}/direction
-	}
+	echo 14 > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio14/direction
 
 	[ ! -d $LOG_PATH ] && mkdir -p $LOG_PATH
 	[ ! -d $DB_PATH ] && mkdir -p $DB_PATH

dectmngr/files/lib/upgrade/keep.d/dect

@@ -1 +0,0 @@
-/etc/dect/LA_DB

dslmngr/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dslmngr
-PKG_VERSION:=1.2.0
+PKG_VERSION:=1.1.2
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
@@ -26,8 +26,14 @@ PKG_LICENSE_FILES:=LICENSE
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
+  TARGET_PLATFORM=MARVELL
+else ifeq ($(CONFIG_TARGET_intel_mips),y)
+  TARGET_PLATFORM=INTEL
 else
   $(info Unexpected CONFIG_TARGET)
 endif
@@ -68,10 +74,6 @@ define Build/Compile
 endef
 
 define Package/dslmngr/install
-	$(CP) ./files/common/* $(1)/
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	$(CP) ./files/broadcom/* $(1)/
-endif
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dslmngr $(1)/sbin/
 endef

dslmngr/files/broadcom/lib/dsl/broadcom.sh

@@ -1,311 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-# ATM #
-check_pvc() {
-	local vpi=$1
-	local vci=$2
-	local ret
-
-	ret=$(xtmctl operate conn --show | awk -v test="$vpi/$vci" '{if ($3==test ) print $5 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-check_xtm_list() {
-	local qclass=$1
-	local pcr scr mbs
-	local ret
-
-	case $# in
-		1)
-			pcr=0
-			scr=0
-			mbs=0
-		;;
-		2)
-			pcr=$2
-			scr=0
-			mbs=0
-		;;
-		4)
-			pcr=$2
-			scr=$3
-			mbs=$4
-		;;
-	esac
-
-	ret=$(xtmctl operate tdte --show | awk -v test="$qclass" -v pcr="$pcr" -v scr="$scr" -v mbs="$mbs" '{if ($2==test && $3==pcr && $4==scr && $5==mbs ) print $1 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_atm_device() {
-	local name vpi vci device link_type encapsulation qos_class pcr mbs scr i
-
-	config_get name $1 name "ATM"
-	config_get vpi $1 vpi "8"
-	config_get vci $1 vci "35"
-	config_get device $1 device "atm0"
-	config_get link_type $1 link_type "eoa"
-	config_get encapsulation $1 encapsulation "llc"
-	config_get qos_class $1 qos_class "ubr"
-	config_get pcr $1 pcr
-	config_get mbs $1 mbs
-	config_get scr $1 scr
-
-	check_pvc $vpi $vci
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret=$?
-
-		if [ "$ret" -eq 0 ]; then
-			case $qos_class in # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-				ubr)
-					xtmctl operate tdte --add "$qos_class"
-				;;
-				ubr_pcr|ubr+)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				cbr)
-					xtmctl operate tdte --add "$qos_class" $pcr
-				;;
-				nrtvbr|vbr-nrt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				rtvbr|vbr-rt)
-					xtmctl operate tdte --add "$qos_class" $pcr $scr $mbs
-				;;
-				gfr)
-				;;
-				abr)
-				;;
-			esac
-		fi
-
-		case $link_type in # EoA, IPoA, PPPoA, CIP
-			EoA|eoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_eth" || encapsulation="llcsnap_eth"
-			;;
-			PPPoA|pppoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_pppoa" || encapsulation="llcencaps_ppp"
-			;;
-			IPoA|ipoa)
-				[ $encapsulation == "vcmux" ] && encapsulation="vcmux_ipoa" || encapsulation="llcsnap_rtip"
-			;;
-			CIP|cip)
-			;;
-		esac
-
-		check_xtm_list $qos_class $pcr $scr $mbs
-		ret="$?"
-
-		xtmctl operate conn --add 1.$vpi.$vci aal5 $encapsulation 0 1 $ret
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq 1.$vpi.$vci $i wrr 1 dt # queue priority 0-7
-		done
-		xtmctl operate conn --createnetdev 1.$vpi.$vci $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_atm_devices() {
-	local vpi vci rest
-	local vpivci=`xtmctl operate conn --show | grep "ATM\|mode" | awk '{if (NR!=1 && $1!="PTM") {print $3}}'`
-
-	for i in $vpivci
-	do
-		rest=${i#\/}
-		vpi=${rest%%\/*}
-		vci=${rest#*\/}
-		echo "xtmctl operate conn --delete 1.$vpi.$vci"
-		xtmctl operate conn --delete 1.$vpi.$vci
-		echo "xtmctl operate conn --deletenetdev 1.$vpi.$vci"
-		xtmctl operate conn --deletenetdev 1.$vpi.$vci
-	done
-}
-
-create_atm_devices() {
-	echo "Creating ATM Device(s)"
-	config_load dsl
-	config_foreach configure_atm_device atm-device
-}
-# ATM END #
-
-# PTM #
-check_ptm() {
-	local ret
-	local ptmprio=$1
-	local dslat=$2
-
-	if [ "$ptmprio" -eq 2 ]; then
-		ptmprio="high"
-	else
-		ptmprio="low"
-	fi
-
-	ret=$(xtmctl operate conn --show | awk -v dslat="$dslat" -v ptmprio="$ptmprio" '{if ($2 == dslat && $3 == ptmprio ) print $2 }')
-
-	case $ret in
-		''|*[!0-9]*) return 0 ;;
-		*) return $ret ;;
-	esac
-}
-
-configure_ptm_device() {
-	local name device priority portid i
-
-	config_get name $1 name "PTM"
-	config_get device $1 device "ptm0"
-	config_get priority $1 priority 1
-	config_get portid $1 portid 1
-
-	check_ptm $priority $portid
-	ret=$?
-
-	if [ "$ret" -eq 0 ]; then
-		xtmctl operate conn --add $portid.$priority
-
-		for i in `seq 0 7`; do
-			xtmctl operate conn --addq $portid.$priority $i wrr 1 dt -1 -1 3000 # queue priority 0-7
-		done
-		echo "xtmctl operate conn --createnetdev $portid.$priority $device"
-		xtmctl operate conn --createnetdev $portid.$priority $device
-		xtmctl operate intf --state 1 enable
-	fi
-}
-
-remove_ptm_devices() {
-	local delptm
-	local x=0
-
-	IFS=$'\n'
-	for i in `xtmctl operate conn --show | grep "PTM\|mode"`
-	do
-		if [ $x -eq 1 ]; then
-			delptm=$(echo $i | awk '{if ($1!="ATM") print $2"."$11}')
-			echo "xtmctl operate conn --delete $delptm"
-			xtmctl operate conn --delete $delptm
-			xtmctl operate conn --deletenetdev $delptm
-		fi
-		x=1
-	done
-	unset IFS
-}
-
-create_ptm_devices() {
-	echo "Creating PTM Device(s)"
-	config_load dsl
-	config_foreach configure_ptm_device ptm-device
-}
-# PTM END #
-
-prioritize_arp()
-{
-      ebtables -t nat -D POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-      ebtables -t nat -A POSTROUTING -j mark --mark-or 0x7 -p ARP >/dev/null
-}
-
-xtm_remove_devices() {
-	remove_atm_devices
-	remove_ptm_devices
-}
-
-xtm_create_devices() {
-	local tpstc="$(xdslctl info --show | grep TPS-TC)"
-	if echo "$tpstc" | grep -q "ATM Mode"; then
-		create_atm_devices
-	elif echo "$tpstc" | grep -q "PTM Mode"; then
-		create_ptm_devices
-	fi
-}
-
-xdsl_configure() {
-	local VDSL=0
-	local GFAST=0
-	local mod=""
-	local modes=""
-	local profile=""
-
-	config_load dsl
-
-	# Modes
-	config_get mode line mode
-	for mod in $mode; do
-		[ $mod == "gdmt" ] && modes="${modes}d"
-		[ $mod == "glite" ] && modes="${modes}l"
-		[ $mod == "t1413" ] && modes="${modes}t"
-		[ $mod == "adsl2" ] && modes="${modes}2"
-		[ $mod == "adsl2p" ] && modes="${modes}p"
-		[ $mod == "annexl" ] && modes="${modes}e"
-		[ $mod == "annexm" ] && modes="${modes}m"
-		[ $mod == "vdsl2" ] && modes="${modes}v" && VDSL=1
-		[ $mod == "gfast" ] && modes="${modes}f" && GFAST=1
-	done
-
-	# VDSL Profiles
-	config_get profile line profile
-	# Capabilities
-	config_get_bool bitswap line bitswap 1
-	[ $bitswap -eq 1 ] && bitswap="on" || bitswap="off"
-	config_get_bool sra line sra 1
-	[ $sra -eq 1 ] && sra="on" || sra="off"
-#	config_get_bool trellis line trellis 1
-	config_get_bool sesdrop line sesdrop 0
-	[ $sesdrop -eq 1 ] && sesdrop="on" || sesdrop="off"
-	# VDSL2 only
-	config_get_bool us0 line us0 1
-	[ $us0 -eq 1 ] && us0="on" || us0="off"
-#	config_get_bool dynamicd line dynamicd 1
-#	config_get_bool dynamicf line dynamicf 1
-	config_get_bool sos line sos 0
-	[ $sos -eq 1 ] && sos="on" || sos="off"
-
-	config_get_bool phyReXmtUs line phyReXmtUs 0
-	config_get_bool phyReXmtDs line phyReXmtDs 1
-	phyReXmt=$(( $((phyReXmtUs<<1)) + phyReXmtDs))
-
-	if [ $VDSL -eq 1 -o $GFAST -eq 1 ]; then
-		echo "xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --profile "$profile" --sra $sra --bitswap $bitswap --us0 $us0 --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	else
-		echo "xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt"
-		xdslctl start --up --mod $modes --sra $sra --bitswap $bitswap --sesdrop $sesdrop --SOS $sos --phyReXmt $phyReXmt
-	fi
-
-	if [ $GFAST -eq 1 ]; then
-		# G.Fast hardware to VDSL hardware, to set the driver bit kPhyCfg2EnableGfastVdslMMTimeOut0.
-		# Enable V43 tone for GFAST.
-		echo "xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400"
-		xdslctl configure1 --phycfg 0 0 0 0 0 0 0 0 0 0 0 0x1400400 0x1400400
-	fi
-}
-
-xdsl_stop() {
-	# echo "Stopping DSL"
-	# stop causes IRQ issues
-	# xdslctl stop
-	return 0
-}
-
-xdsl_init() {
-	prioritize_arp
-
-	echo "Starting DSL"
-
-	xtmctl start
-	xtmctl operate intf --state 1 enable
-}

dslmngr/files/common/etc/config/dsl

@@ -1,53 +0,0 @@
-# OEM specific parameters
-config oem-parameters 'oem'
-#	option country_code "0000"   # 2 bytes hex
-#	option vendor_id "IO"        # 4 bytes string
-#	option vendor_suffix "0000"  # 2 bytes hex
-#	option sw_version "iopsys"   # 16 bytes string
-#	option serial_nr "00000000"  # 32 bytes string
-
-# DSL Modes
-config dsl-line line
-	list mode gdmt
-	list mode glite
-	list mode t1413
-	list mode adsl2
-	list mode adsl2p
-	list mode annexl
-	list mode annexm
-	list mode vdsl2
-	# VDSL2 profiles
-	list profile 8a
-	list profile 8b
-	list profile 8c
-	list profile 8d
-	list profile 12a
-	list profile 12b
-	list profile 17a
-	list profile 30a
-	option bitswap 1
-	option sra 1
-	option us0 1 # VDSL2 only
-	option sesdrop 0
-	option sos 0
-	option phyReXmtUs 0
-	option phyReXmtDs 1
-
-config atm-device atm0
-	option name 'ATM'
-	option vpi '8'
-	option vci '35'
-	option device atm0
-	option link_type 'eoa' # EoA, IPoA, PPPoA, CIP
-	option encapsulation 'llc' # llc, vcmux
-	option qos_class 'ubr' # ubr, cbr, gfr, vbr-nrt, vbr-rt, ubr+, abr
-#	option pcr '512'
-#	option scr '256'
-#	option mbs '1024'
-
-config ptm-device ptm0
-	option name 'PTM'
-	option device 'ptm0'
-	option priority '1'
-	option portid '1'
-

dslmngr/files/common/etc/hotplug.d/dsl/10-devices

@@ -1,7 +0,0 @@
-[ "$STATUS" == "up" -o "$STATUS" == "down" ] || exit 0
-
-. /lib/functions.sh
-include /lib/dsl
-
-xtm_remove_devices
-xtm_create_devices

dslmngr/files/common/etc/hotplug.d/dsl/20-leds

@@ -1,7 +0,0 @@
-if [ "$STATUS" == "up" ]; then
-	ubus call led.dsl set '{"state":"ok"}'
-elif [ "$STATUS" == "down" ]; then
-	ubus call led.dsl set '{"state":"off"}'
-elif [ "$STATUS" == "training" ]; then
-	ubus call led.dsl set '{"state":"alert"}'
-fi

dslmngr/files/common/etc/init.d/dsl

@@ -1,48 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-. /lib/functions.sh
-include /lib/dsl
-
-START=20
-USE_PROCD=1
-
-DSLMNGR=$(which dslmngr)
-
-start_service() {
-	[ -n "$DSLMNGR" ] && {
-		procd_open_instance
-		procd_set_param command "$DSLMNGR"
-		procd_set_param respawn
-		procd_close_instance
-	}
-
-	xdsl_configure
-	xtm_create_devices
-}
-
-stop_service() {
-	[ -n "$DSLMNGR" ] && service_stop $DSLMNGR
-
-	xtm_remove_devices
-	xdsl_stop
-}
-
-boot() {
-	local HASADSL="$(db -q get hw.board.hasAdsl)"
-	local HASVDSL="$(db -q get hw.board.hasVdsl)"
-	[ "$HASADSL" == "1" -o "$HASVDSL" == "1" ] || return
-
-	xdsl_init
-
-	start
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger dsl
-}
-

easy-qos/Makefile

@@ -19,7 +19,7 @@ define Package/easy-qos
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Easy QoS
-  DEPENDS:=@(TARGET_brcmbca||TARGET_airoha)
+  DEPENDS:=@(TARGET_intel_mips||TARGET_iopsys_brcm63xx_arm)
 endef
 
 define Package/easy-qos/description
@@ -39,7 +39,11 @@ define Package/easy-qos/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(CP) ./files/etc/config/easy_qos $(1)/etc/config/
+ifeq ($(CONFIG_TARGET_intel_mips),y)
+	$(CP) ./files/etc/init.d/easy_qos.classcfg $(1)/etc/init.d/easy_qos
+else
 	$(CP) ./files/etc/init.d/easy_qos.iptables $(1)/etc/init.d/easy_qos
+endif
 	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 	$(CP) ./files/etc/firewall.easyqos $(1)/etc/firewall.easyqos
 endef

easy-qos/files/etc/init.d/easy_qos.classcfg

@@ -0,0 +1,301 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+USE_PROCD=1
+
+RULE_LIST="/tmp/easy_qos_rule.list"
+CLIENT_LIST="/tmp/easy_qos_class_client.list"
+BRIDGE_INTF=""
+
+[ -f /etc/profile.d/intel.sh ] && {
+	. /etc/profile.d/intel.sh
+	sh /etc/profile.d/intel.sh
+}
+
+log() {
+	echo "${@}"|logger -t easy_qos_class -p debug
+}
+
+exec_log() {
+	${@}
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+	fi
+}
+
+exec_class_log() {
+	${@} |grep -i successful
+	if [ "${?}" -ne 0 ]; then
+		log "Failed to create ${@}";
+		return 1
+	fi
+	return 0
+}
+
+get_priority() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo 8;;
+		"low")
+			echo 7;;
+		"besteffort")
+			echo 6;;
+		"normal")
+			echo 5;;
+		"video")
+			echo 4;;
+		"medium")
+			echo 3;;
+		"high")
+			echo 2;;
+		"highest")
+			echo 1;;
+	esac
+}
+
+get_mark() {
+	local prio=$(echo $1|tr [A-Z] [a-z]);
+	case "${prio}" in
+		"lowest")
+			echo "0x41/0x3df";;
+		"low")
+			echo "0x82/0x3df";;
+		"besteffort")
+			echo "0xc3/0x3df";;
+		"normal")
+			echo "0x104/0x3df";;
+		"video")
+			echo "0x145/0x3df";;
+		"medium")
+			echo "0x186/0x3df";;
+		"high")
+			echo "0x1c7/0x3df";;
+		"highest")
+			echo "0x208/0x3df";;
+	esac
+}
+
+clean_client_entries() {
+	[ -f ${CLIENT_LIST} ] && rm ${CLIENT_LIST}
+}
+
+map_client_entries() {
+	local clients ip mac host
+
+	json_load "$(ubus call router.network 'clients')"
+	json_get_keys keys
+
+	for key in ${keys};
+	do
+		json_select ${key}
+		json_get_vars ipaddr macaddr hostname
+		clients="${macaddr} ${ipaddr} ${hostname};${clients}"
+		json_select ..
+	done
+
+	json_init
+
+	IFS=";"
+	for client in ${clients};
+	do
+		macaddr=$(echo ${client} | cut -d" " -f1)
+		json_add_object "${macaddr//:/_}"
+		json_add_string "ip" "$(echo ${client} | cut -d" " -f2)"
+		json_add_string "macaddr" "$(echo ${client} | cut -d" " -f1)"
+		json_add_string "host" "$(echo ${client} | cut -d" " -f3)"
+		json_close_object
+	done
+
+	IFS=' '
+	echo `json_dump` > ${CLIENT_LIST}
+	json_cleanup
+}
+
+# Find the IP of a corresponding mac from arp table
+get_ipaddress() {
+	local clients ip mac host
+
+	json_load "$(cat ${CLIENT_LIST})"
+	json_get_keys keys
+
+	# jshn seems a bit iffy on having : in key, replace by _
+	json_select "${1//:/_}" 2 > /dev/null
+	json_get_var ip ip
+
+	echo "$ip"
+}
+
+check_and_create() {
+	iptables -t mangle -C PREROUTING ${@} 2>/dev/null
+	# Create rule if not exists
+	if [ ${?} -ne 0 ]; then
+		exec_log iptables -t mangle -A PREROUTING ${@}
+	else
+		log "Rule exists for ${@}"
+	fi
+}
+
+create_ip_rule() {
+	local proto=$1; shift
+	local src_ip=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+
+	cmd="-j EXTMARK --set-mark ${mark}";
+	if [ "${proto}" != "icmp" ]; then
+		if [ -n "${ports}" ]; then
+			cmd="--match multiport --dports ${ports} ${cmd}";
+		fi
+	fi
+
+	if [ "${proto}" == "icmp" ]; then
+		cmd="-p icmp -m icmp --icmp-type 8 $cmd"
+	elif [ "${proto}" == "all" ]; then
+		cmd="-p all $cmd"
+	else
+		cmd="-p ${proto} -m ${proto} $cmd"
+	fi
+	cmd="-s ${src_ip} $cmd"
+
+	check_and_create ${cmd}
+}
+
+is_lan_bridge() {
+	local _section=$1
+	local _type
+	local _is_lan
+
+	config_get _type "$section" "type"
+	config_get _is_lan "$section" "is_lan"
+
+	if [ "${_type}" == "bridge" -a "${_is_lan}" == "1" ]; then
+		BRIDGE_INTF="br-${_section}"
+	fi
+}
+
+get_bridge_interface() {
+	config_load network
+	config_foreach is_lan_bridge interface
+}
+
+validate_rule_section()
+{
+	uci_validate_section easy_qos rule "${1}" \
+		'priority:string' \
+		'macaddr:string' \
+		'proto:string:none' \
+		'port:list(uinteger)' \
+		'comment:string:none'
+}
+
+# Clear existing rules before applying new rules
+clear_existing_rules() {
+	# execute the delete rules written onto a file then delete the file
+	[ -f ${RULE_LIST} ] || return 0
+
+	while read line
+	do
+		log "Deleting old classification rules"
+		exec_class_log classcfg -D ${line} -i ${BRIDGE_INTF}
+	done <${RULE_LIST}
+
+	local rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	while [ -n "${rule}" ]; do
+		exec_log iptables -t mangle ${rule}
+		rule=$(iptables -t mangle -S PREROUTING|grep -m 1 EXTMARK |sed 's/-A/-D/1')
+	done
+	sync
+
+	[ -f ${RULE_LIST} ] && rm ${RULE_LIST}
+}
+
+# classcfg -M local_dhcp -i lo -p udp --dport 67:67 --dport 68:68 -j mark --mark 1
+create_rule() {
+	local proto=$1; shift
+	local mac_addr=$1; shift
+	local mark=$1; shift
+	local ports=$1;
+	local cmd="";
+	# Rule name is uniqe, so we take hash of all the input as rule_name
+	local rule_name="$(echo ${mac_addr}${proto}${mark}${ports} |md5sum |head -c 30)"
+
+	cmd="-j mark --mark ${mark}";
+
+	if [ "${mac_addr}" != "none" ]; then
+		cmd="--smac ${mac_addr} ${cmd}";
+	fi
+
+	if [ "${proto}" != "icmp" ]; then
+		if [ "${ports}" != "none" ]; then
+			IFS=","
+			for port in ${ports};
+			do
+				cmd="--dport ${port}:${port} ${cmd}";
+			done
+			IFS=' '
+		fi
+	fi
+	if [ "${proto}" != "none" ]; then
+		cmd="-p ${proto} $cmd"
+	fi
+	cmd="-i ${BRIDGE_INTF} $cmd"
+	cmd="-A ${rule_name} $cmd"
+
+	# Store the rule_names for cleanup on reload
+	exec_class_log classcfg ${cmd}
+	[ $? -eq 0 ] && \
+		echo ${rule_name}  >> ${RULE_LIST}
+}
+
+manage_rule() {
+	local cfg="$1"
+	local priority macaddr proto port comment prio_num port_list ip ipmark
+
+	validate_rule_section "${1}" || {
+		log "Validation of section failed"
+		return 1;
+	}
+
+	prio_num=$(get_priority ${priority})
+	port_list=$(echo ${port}|sed 's/ /,/g')
+	ipmark=$(get_mark ${priority})
+	ip=$(get_ipaddress ${macaddr})
+
+	if [ -n "${prio_num}" ]; then
+		if [ "${proto}" == "none" -o "${proto}" == "tcpudp" ]; then
+			create_rule tcp ${macaddr} ${prio_num} ${port_list}
+			create_rule udp ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule tcp ${ip} ${ipmark} ${port_list}
+				create_ip_rule udp ${ip} ${ipmark} ${port_list}
+			fi
+		else
+			create_rule ${proto} ${macaddr} ${prio_num} ${port_list}
+			if [ -n "${ip}" ]; then
+				create_ip_rule ${proto} ${ip} ${ipmark} ${port_list}
+			fi
+		fi
+	fi
+}
+
+reload_service() {
+	get_bridge_interface
+	map_client_entries
+	clear_existing_rules
+	config_load easy_qos
+	config_foreach manage_rule rule
+	clean_client_entries
+}
+
+start_service() {
+	[ -x /opt/intel/usr/sbin/classcfg ] || exit 0
+	reload_service
+	log "Easy QoS class installed"
+}
+
+service_triggers() {
+	procd_add_reload_trigger "easy_qos" "network"
+}
+

easy-qos/files/etc/init.d/easy_qos.ebtables

@@ -15,7 +15,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;
@@ -98,7 +98,7 @@ manage_rule() {
 		return 1;
 	}
 
-	protocol=$(echo ${proto}|tr 'A-Z' 'a-z')
+	protocol=$(echo ${proto}|tr [A-Z] [a-z])
 	prio_num=$(get_priority ${priority})
 	if [ -n "${macaddr}" -a -n "${prio_num}" ]; then
 		for p in ${port}; do

easy-qos/files/etc/init.d/easy_qos.iptables

@@ -19,7 +19,7 @@ exec_log() {
 }
 
 get_priority() {
-	local prio=$(echo $1|tr 'A-Z' 'a-z');
+	local prio=$(echo $1|tr [A-Z] [a-z]);
 	case "${prio}" in
 		"lowest")
 			echo 0;;

easy-soc-events/Makefile

@@ -19,7 +19,7 @@ include $(INCLUDE_DIR)/package.mk
 
 -include $(TOPDIR)/.config
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
   LINUX_DIR=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.1
   LINUX_VERSION := 4.1.52
   LINUXINCLUDE=-Iarch/$(LINUX_KARCH)/mach-bcm963xx/include
@@ -85,7 +85,7 @@ define Build/Compile
 endef
 
 
-ifneq ($(CONFIG_TARGET_brcmbca),)
+ifneq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),)
 define KernelPackage/easy-soc-events/install-extra
 	cp $(PKG_BUILD_DIR)/easyevent.ko $(FS_DIR)/lib/modules/$(LINUX_VERSION)/extra
 endef

easy-soc-libs/Config.in

@@ -0,0 +1,5 @@
+# libeasy configuration
+
+config LIBWIFI_USE_CTRL_IFACE
+	bool "Use UNIX sockets"
+	default n

easy-soc-libs/Makefile

@@ -7,13 +7,13 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=easy-soc-libs
-PKG_VERSION:=7.2.26
+PKG_VERSION:=6.4.5
 PKG_RELEASE:=1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=350793b45873480d8981dac540c4145705a7b7ba
+PKG_SOURCE_VERSION:=23028753fdfc5f4a0e8da33fb6b813e21c5d6c23
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
@@ -36,63 +36,38 @@ define Package/easy-soc-libs
   MENU:=1
 endef
 
-ifeq ($(CONFIG_TARGET_brcmbca),y)
+ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
   TARGET_PLATFORM=BROADCOM
-  TARGET_WIFI_TYPE=BROADCOM
   CHIP_ID=$(patsubst "%",%,$(CONFIG_BCM_CHIP_ID))
   TARGET_CFLAGS +=-DIOPSYS_BROADCOM -DCHIP_$(CHIP_ID) -DCONFIG_BCM9$(CHIP_ID) \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/bcmdrivers/opensource/include/bcm963xx \
 	-I$(STAGING_DIR)/usr/include/bcm963xx/userspace/public/include
+else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
+  TARGET_PLATFORM=MEDIATEK
+  TARGET_CFLAGS +=-DIOPSYS_MEDIATEK
 else ifeq ($(CONFIG_TARGET_iopsys_x86),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
 else ifeq ($(CONFIG_TARGET_iopsys_armvirt),y)
   TARGET_PLATFORM=TEST
-  TARGET_WIFI_TYPE=TEST
   TARGET_CFLAGS +=-DIOPSYS_TEST
-else ifeq ($(CONFIG_TARGET_airoha),y)
-  TARGET_PLATFORM=ECONET
-  TARGET_WIFI_TYPE=MEDIATEK MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_ECONET
-else ifeq ($(CONFIG_TARGET_ipq95xx),y)
-  TARGET_PLATFORM=IPQ95XX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIPQ95XX
-else ifeq ($(CONFIG_TARGET_iopsys_mediatek),y)
-  TARGET_PLATFORM=LINUX
-  TARGET_WIFI_TYPE=MAC80211
-  TARGET_CFLAGS +=-DIOPSYS_LINUX
 else
   $(info Unexpected CONFIG_TARGET, use default MAC80211)
   TARGET_PLATFORM=MAC80211
-  TARGET_WIFI_TYPE=MAC80211
   TARGET_CFLAGS +=-DIOPSYS_MAC80211
 endif
 
+export TARGET_PLATFORM
+
 subdirs := \
 	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifi) \
 	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
 	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
 	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
 	$(if $(CONFIG_PACKAGE_libqos),libqos)
 
-ifneq ($(CONFIG_PACKAGE_libwifi),)
-TARGET_CFLAGS +=-DHAS_WIFI
-endif
-
-esl-pkgs := \
-	$(if $(CONFIG_PACKAGE_libeasy),libeasy) \
-	$(if $(CONFIG_PACKAGE_libwifiutils),libwifiutils) \
-	$(if $(CONFIG_PACKAGE_libwifi),libwifi) \
-	$(if $(CONFIG_PACKAGE_libdsl),libdsl) \
-	$(if $(CONFIG_PACKAGE_libethernet),libethernet) \
-	$(if $(CONFIG_PACKAGE_libqos),libqos)
-
-esl-pkgs-all := \
+EASY_SOC_LIBS := \
 	libeasy \
-	libwifiutils \
 	libwifi \
 	libdsl \
 	libethernet \
@@ -112,7 +87,6 @@ MAKE_FLAGS += \
 	LDFLAGS="$(TARGET_LDFLAGS)" \
 	FPIC="$(FPIC)" \
 	PLATFORM="$(TARGET_PLATFORM)" \
-	WIFI_TYPE="$(TARGET_WIFI_TYPE)" \
 	subdirs="$(subdirs)"
 
 ifeq ($(LOCAL_DEV),1)
@@ -142,15 +116,15 @@ define Build/Compile
 	$(Build/Compile/rebuild)
 	touch $(PKG_BUILD_DIR)/.config_$(CONFIG_TARGET_PROFILE)
 	$(call Build/Compile/Default)
-	$(foreach dir,$(esl-pkgs),$(call Build/Compile/$(dir)))
+	$(foreach dir,$(subdirs),$(call Build/Compile/$(dir)))
 endef
 
 define Build/InstallDev
-	$(foreach dir,$(esl-pkgs),$(call Build/InstallDev/$(dir),$(1),$(2));)
+	$(foreach dir,$(subdirs),$(call Build/InstallDev/$(dir),$(1),$(2));)
 endef
 
 define Package/easy-soc-libs/install
 	:
 endef
 
-$(eval $(foreach e,$(esl-pkgs-all),$(call BuildPackage,$(e))))
+$(eval $(foreach e,$(EASY_SOC_LIBS),$(call BuildPackage,$(e))))

easy-soc-libs/easy.mk

@@ -6,6 +6,10 @@ define Package/libeasy
   DEPENDS+=+libnl +libnl-route
 endef
 
+define Package/libeasy/config
+    source "$(SOURCE)/Config.in"
+endef
+
 define Build/InstallDev/libeasy
 	$(INSTALL_DIR) $(1)/usr/include/easy
 	$(INSTALL_DIR) $(1)/usr/lib

easy-soc-libs/ethernet.mk

@@ -2,7 +2,7 @@
 define Package/libethernet
   $(call Package/easy-soc-libs)
   TITLE:= Ethernet library (libethernet)
-  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_airoha:ecnt_api
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_ramips:swconfig
 endef
 
 define Package/libethernet/config

easy-soc-libs/wifi.mk

@@ -1,53 +1,29 @@
 
-define Package/libwifiutils
-  $(call Package/easy-soc-libs)
-  TITLE:= WiFi utility library (libwifiutils.so)
-  DEPENDS+=+libnl +libnl-route +libeasy
-endef
-
-define Build/InstallDev/libwifiutils
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifidefs.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiutils.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-define Package/libwifiutils/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifiutils*.so* $(1)/usr/lib/
-endef
-
-
 define Package/libwifi
   $(call Package/easy-soc-libs)
   TITLE:= WiFi library (libwifi)
-  DEPENDS+=+libnl +libnl-route +libeasy +libwifiutils +TARGET_brcmbca:bcmkernel
+  DEPENDS+=+libnl +libnl-route +libeasy +TARGET_iopsys_brcm63xx_arm:bcmkernel
 endef
 
 define Package/libwifi/config
-  if PACKAGE_libwifi
-  	config LIBWIFI_DEBUG
+  if PACKAGE_libdsl
+	  config LIBWIFI_DEBUG
 		depends on PACKAGE_libwifi
-		bool "Enable debugging in libwifi"
+		bool "Enable wifi debugging"
 		default n
 
-	config LIBWIFI_USE_CTRL_IFACE
-		bool "Create UNIX sockets to interface with hostapd/wpa_supplicant"
-		default n
   endif
 endef
 
-
 define Build/InstallDev/libwifi
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/wifiops.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/libwifi/wifi.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
 endef
 
 define Package/libwifi/install
 	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi-7*.so* $(1)/usr/lib/
+	$(CP) $(PKG_BUILD_DIR)/libwifi/libwifi*.so* $(1)/usr/lib/
 endef
+

endptmngr/Makefile

@@ -7,18 +7,18 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=endptmngr
-PKG_VERSION:=0.6
+PKG_VERSION:=0.5
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/endptmngr.git
-PKG_SOURCE_VERSION:=fb85081443c19b5062bede49c80b1802c0f05d34
+PKG_SOURCE_VERSION:=debfc47348d6e1fc1c8b126ad50a7f5f8db3e19d
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
 endif
 
-PKG_LICENSE:=PROPRIETARY
+PKG_LICENSE:=MIT
 PKG_LICENSE_FILES:=LICENSE
 
 export BUILD_DIR
@@ -30,6 +30,7 @@ PKG_BUILD_PARALLEL:=1
 # indirectly. This ensures that the package is rebuilt on config-changes.
 PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
 
+export CONFIG_BRCM_SDK_VER_504002
 export CONFIG_BCM_CHIP_ID
 
 include $(INCLUDE_DIR)/package.mk
@@ -55,10 +56,6 @@ define Build/Prepare
 endef
 endif
 
-TARGET_CFLAGS += \
-        -Wall \
-        -Werror
-
 define Package/endptmngr/install
 	$(CP) ./files/* $(1)/
 	$(INSTALL_DIR) $(1)/usr/sbin

endptmngr/files/etc/init.d/endptmngr

@@ -7,8 +7,6 @@ USE_PROCD=1
 NAME=endptmngr
 
 start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
 	procd_open_instance
 	procd_set_param env hw_board_hasDect=$(db get hw.board.hasDect)
 	procd_set_param command $NAME

ethmngr/Makefile

@@ -5,7 +5,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ethmngr
-PKG_VERSION:=2.1.0
+PKG_VERSION:=2.0.1
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_VERSION:=5a0ff3bc7c49dcb05129f423ef8e0c4929f6aa03
@@ -23,7 +23,7 @@ define Package/ethmngr
   SECTION:=utils
   CATEGORY:=Utilities
   TITLE:=Ethernet status and configration utility
-  DEPENDS:=+(TARGET_brcmbca||TARGET_airoha||TARGET_ipq95xx||TARGET_iopsys_mediatek):libethernet +libuci +libubox +ubus +libpthread +libnl-genl
+  DEPENDS:=+libethernet +libuci +libubox +ubus +libpthread +libnl-genl
 endef
 
 define Package/ethmngr/description
@@ -37,24 +37,10 @@ TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-define Build/Compile
-endef
-endif
-
 define Package/ethmngr/install
-	$(CP) ./files/common/* $(1)/
-ifneq ($(CONFIG_TARGET_brcmbca),)
-	$(CP) ./files/broadcom/* $(1)/
-else ifneq ($(CONFIG_TARGET_airoha),)
-	$(CP) ./files/airoha/* $(1)/
-else
-	$(CP) ./files/linux/* $(1)/
-endif
-ifneq ($(CONFIG_TARGET_brcmbca)$(CONFIG_TARGET_airoha)$(CONFIG_TARGET_ipq95xx)$(CONFIG_TARGET_iopsys_mediatek),)
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/etc/init.d $(1)/usr/sbin
+	$(INSTALL_BIN) ./files/ethmngr.init $(1)/etc/init.d/ethmngr
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ethmngr $(1)/usr/sbin/
-endif
 endef
 
 $(eval $(call BuildPackage,ethmngr))

ethmngr/files/airoha/lib/ethernet/airoha.sh

@@ -1,208 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-unset -f switchmgr
-# alias for switchmgr
-switchmgr() {
-	"/userfs/bin/switchmgr" "$@"
-}
-
-unset -f tc3162_get_lan_port
-# get lan port port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_lan_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-
-	# only for tc3162 eth switch ports (eth0.x, 0 < x < 7)
-	case "${ifname}" in
-	eth0.*)
-		;;
-	*)
-		logger -t "port-management" \
-		"unsupported - ${ifname} is not tc3162 switch port"
-		return 255
-		;;
-	esac
-
-	let "if_idx=$(echo "${ifname}" | cut -f2 -d'.')"
-	[[ -z "${if_idx}" ]] && return 255
-	[[ ${if_idx} -lt 1 || ${if_idx} -gt 6 ]] && {
-		logger -t "port-management" \
-		"incorrect tc3162 lan port index ${if_idx} picked from ifname ${ifname}"
-		return 255
-	}
-	let "if_idx=${if_idx}-1"
-	return ${if_idx}
-}
-
-
-unset -f tc3162_get_mapped_port
-# get mapped switch port by ifname
-# arg1: port ifname, ex: eth0.1
-tc3162_get_mapped_port() {
-	[[ -z "$1" ]] && return 255
-
-	local ifname="$1"
-	local if_idx=255
-	local prtmap_procfile="/proc/tc3162/eth_portmap"
-	local lan_prt=255
-	local port=255
-	local prtmap_out_line_num=4
-	local prtmap_out_line=""
-	
-	# check "lan port map" marker in portmap output string
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-	[[ ${prtmap_out_line} != "lan_port_map" ]] && return 255
-
-	tc3162_get_lan_port "${ifname}"
-	let "if_idx=$?"
-	[[ -z "${if_idx}" || ${if_idx} -eq 255 ]] && return
-
-	# get lan portmapping string "lan_port mapped_port" for ifname by it's index
-	let "prtmap_out_line_num=${prtmap_out_line_num}+1+${if_idx}"
-	prtmap_out_line="$(sed -n "${prtmap_out_line_num}p" ${prtmap_procfile})"
-
-	# get and check lan port index from lan portmapping string
-	lan_prt=$(echo "${prtmap_out_line}" | cut -f 1 -d' ')
-	[[ -z "${lan_prt}" || "${if_idx}" != "${lan_prt}" ]] && return 255
-
-	# get and check mapped port from lan portmapping string
-	let "port=$(echo "${prtmap_out_line}" | cut -f 2 -d' ')"
-	[[ ${port} -lt 0 || ${port} -gt 255 ]] && return 255
-
-	return ${port}
-}
-
-unset -f get_max_port_speed
-# arg1: port ifname, ex: eth0.1
-get_max_port_speed() {
-	[[ -z "$1" ]] && { echo 0; return; }
-
-	local ifname="$1"
-	local port=255
-	local speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	# tc3162 capability for all ports is 1Gbps
-	speed=1000
-
-	echo $speed
-}
-
-unset -f power_updown
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-power_updown() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local port=255
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-
-	switchmgr phy admin "${port}" "${enabled}"
-}
-
-unset -f set_port_settings
-# arg1: port ifname, ex: eth0.1
-# arg2: port enabled, ex: 0/1/off/on/..
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: 0/1/off/on/..
-# arg6: port eee, ex: 0/1/off/on/..
-# arg7: port pause, ex: 0/1/off/on/..
-set_port_settings() {
-	[[ -z "$1" ]] && return
-	[[ -z "$2" ]] && return
-	[[ -z "$3" ]] && return
-	[[ -z "$4" ]] && return
-	[[ -z "$5" ]] && return
-	[[ -z "$6" ]] && return
-	[[ -z "$7" ]] && return
-
-	local ifname="$1"
-	local enabled="$2"
-	local speed="$3"
-	local duplex="$4"
-	local autoneg=$5
-	local eee="$6"
-	local pause="$7"
-	local port=255
-	local speedmode=1
-	local last_speed=0
-
-	[[ -d "/sys/class/net/${ifname}" ]] || {
-		logger -t "port-management" "interface ${ifname} is not found"
-		return
-	}
-	
-	let "enabled=$(get_bool "${enabled}" "-1")"
-	[[ ${enabled} -eq -1 ]] && return
-
-	let "autoneg=$(get_bool "${autoneg}" "-1")"
-	[[ ${autoneg} -eq -1 ]] && return
-
-	let "eee=$(get_bool "${eee}" "-1")"
-	[[ ${eee} -eq -1 ]] && return
-	
-	let "pause=$(get_bool "${pause}" "-1")"
-	[[ ${pause} -eq -1 ]] && return
-	
-	duplex="$(echo "${duplex}" | awk '{print tolower($0)}')"
-	[[ "${duplex}" != "half" && "${duplex}" != "full" ]] && return
-
-	tc3162_get_lan_port "${ifname}"
-	let "port=$?"
-	[[ -z "${port}" || ${port} -eq 255 ]] && return
-	
-	last_speed="$(switchmgr phy maxspeed "${port}" | cut -f2 -d':')"
-	[[ -z "${last_speed}" || "${last_speed}" == "*Down*" ]] \
-		&& last_speed=${speed}
-	
-	switchmgr phy pause "${port}" "${pause}"
-
-	# set speedmode: speed+duplex+autoneg
-# FIXME: switchmgr has no separate setting for 1Gbps speed - use autoneg instead
-	if [[ ${autoneg} -eq 1 || ${speed} -gt 100 ]]; then
-		switchmgr phy speedmode ${port} "1"
-	else
-		[[ ${speed} -gt 10 ]] && let "speedmode=2" || let "speedmode=4"
-		[[ "${duplex}" == "half" ]] && let "speedmode=${speedmode}+1"
-		switchmgr phy speedmode "${port}" "${speedmode}"
-	fi
-	
-# TODO: implement MAC control register manipulations (mapped ports used) for
-	# eee settings change
-	# separate (tx/rx) pause (flow control) settings change
-	# set speed to 1Gbps separately from autoneg mode
-	
-# FIXME: workaround for duplex/pause settings being not applied if speed is unchanged
-	[[ ${last_speed} -eq ${speed} ]] && power_updown "${ifname}" 0
-
-	power_updown "${ifname}" ${enabled}
-
-}

ethmngr/files/broadcom/lib/ethernet/broadcom.sh

@@ -1,140 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethctl $ifname media-type 2>/dev/null | grep 'PHY Capabilities' | awk '{print$NF}' | cut -d'|' -f1)"
-	local speed=1000
-
-	case "$phycap" in
-		10GFD) speed=10000 ;;
-		5GFD) speed=5000 ;;
-		2.5GFD) speed=2500 ;;
-		1GFD|1GHD) speed=1000 ;;
-		100MFD|100MHD) speed=100 ;;
-		10MFD|10MHD) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port name, ex: eth0
-get_port_number() {
-	[ -z "$1" ] && return
-	local ports="0 1 2 3 4 5 6 7 8"
-	local units="0 1"
-	local port="$1"
-	local ifname
-
-	for unit in $units; do
-		for prt in $ports; do
-			ifname="$(ethswctl getifname $unit $prt 2>/dev/null | awk '{print$NF}')"
-			if [ "$ifname" == "$port" ]; then
-				echo "$unit $prt"
-				return
-			fi
-		done
-	done
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ethctl $ifname phy-power $updown >/dev/null
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	local unitport="$(get_port_number $ifname)"
-	local unit=$(echo $unitport | cut -d ' ' -f 1)
-	local port=$(echo $unitport | cut -d ' ' -f 2)
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	[ "$duplex" == "half" ] && duplex=0 || duplex=1
-	[ "$duplex" == 0 ] && dplx="HD" || dplx="FD"
-	[ "$autoneg" == "on" ] && media_type="auto" || media_type="$speed$dplx"
-
-	phycrossbar="$(ethctl $ifname phy-crossbar | head -1)"
-	crossbartype="$(echo $phycrossbar | awk '{print$2$3}')"
-	# Take only the last PHY Endpoint (non-Serdes) into account as Serdes port number precedes
-	[ "$crossbartype" == "oncrossbar" ] && pyhendpoint="$(echo $phycrossbar | awk '{print$NF}')"
-
-	phycaps="$(ethctl $ifname media-type ${pyhendpoint:+ port $pyhendpoint} | awk -F'PHY Capabilities: ' '{print$2}')"
-	numofcaps="$(echo $phycaps | tr '|' ' ' | wc -w)"
-
-	if [ "$numofcaps" == "1" ]; then
-		logger -t "port-management" "$ifname is capable of $phycaps only; not setting speed/duplex"
-	else
-		logger -t "port-management" "$ifname is capable of $phycaps; setting speed/duplex to $media_type"
-		ethctl $ifname media-type $media_type ${pyhendpoint:+ port $pyhendpoint} &>/dev/null
-	fi
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-	if [ "$auto" == "on" ]; then
-		# Use ethswctl utility to set pause autoneg
-		# as ethtool is not setting it properly
-		ethswctl -c pause -n $unit -p $port -v $pause 2>&1 >/dev/null
-	else
-		ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-	fi
-
-	power_updown $ifname $enabled
-}

ethmngr/files/common/etc/uci-defaults/15-ports-config-generate

@@ -1,81 +0,0 @@
-#!/bin/sh
-
-populate_config_from_db() {
-	. /lib/functions.sh
-	. /lib/network/utils.sh
-	include /lib/ethernet
-
-	portorder="$(db -q get hw.board.ethernetPortOrder)"
-	for port in $portorder; do
-		speed="$(get_max_port_speed $port 2>/dev/null)"
-		speed="${speed:-1000}"
-
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$(get_port_name $port)"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$(get_port_name $port)"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$(db -q get hw.board.ethernetWanPort)" = "$port" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-
-	uci commit ports
-}
-
-populate_config_from_device_tree() {
-	for path in $(find /proc/device-tree/ -name "port@*"); do
-		port="$(cat $path/label)"
-		[ -n "$port" ] || continue
-		[ "$port" = "cpu" ] && continue
-		speed=1000
-		if [ -e "$path/phy-mode" ]; then
-			phymode="$(cat $path/phy-mode)"
-			case "$phymode" in
-				10000*) speed=10000 ;;
-				2500*) speed=2500 ;;
-			esac
-		fi
-		PORT="$(echo $port | tr '[a-z]' '[A-Z]')"
-		uci add ports ethport
-		uci rename ports.@ethport[-1]="$PORT"
-		uci set ports.@ethport[-1].enabled=1
-		uci set ports.@ethport[-1].name="$PORT"
-		uci set ports.@ethport[-1].ifname="$port"
-		uci set ports.@ethport[-1].speed="$speed"
-		uci set ports.@ethport[-1].duplex="full"
-		uci set ports.@ethport[-1].autoneg=1
-		uci set ports.@ethport[-1].eee=0
-		if [ "$port" = "wan" ]; then
-			uci set ports.@ethport[-1].pause=1
-			uci set ports.@ethport[-1].uplink=1
-		else
-			uci set ports.@ethport[-1].pause=0
-		fi
-	done
-	uci commit ports
-}
-
-if [ -s "/etc/config/ports" ]; then
-	if uci -q get ports.@ethport[0] >/dev/null; then
-		# exit if there is any valid content
-		exit 0
-	else
-		rm -f /etc/config/ports
-	fi
-fi
-
-touch /etc/config/ports
-
-if [ -f /sbin/db -a -n "$(db get hw.board.ethernetPortOrder 2>/dev/null)" ]; then
-	populate_config_from_db
-elif [ -d /proc/device-tree/ ]; then
-	populate_config_from_device_tree
-fi

ethmngr/files/ethmngr.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+
+START=95
+STOP=10
+
+USE_PROCD=1
+PROG=/usr/sbin/ethmngr
+
+start_service() {
+	procd_open_instance
+	procd_set_param command ${PROG}
+	procd_set_param respawn
+	procd_close_instance
+}
+
+reload_service() {
+        stop
+        start
+}

ethmngr/files/linux/lib/ethernet/linux.sh

@@ -1,95 +0,0 @@
-# arg1: port ifname, ex: eth0
-get_max_port_speed() {
-	if [ -z "$1" ]; then
-		echo 0
-		return
-	fi
-
-	local ifname="$1"
-	local phycap="$(ethtool $ifname | grep -A 10 "Supported link modes" | grep 000 | tail -n 1 | awk '{print$NF}')"
-	local speed=1000
-
-	case "$phycap" in
-		10000*) speed=10000 ;;
-		5000*) speed=5000 ;;
-		2500*) speed=2500 ;;
-		1000*) speed=1000 ;;
-		100*) speed=100 ;;
-		10*) speed=10 ;;
-	esac
-
-	echo $speed
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-power_updown() {
-	local ifname="$1"
-	local enabled=$2
-
-	local updown="up"
-	[ $enabled -eq 0 ] && updown="down"
-	ip link set dev $ifname $updown
-}
-
-# arg1: port ifname, ex: eth0
-# arg2: port enabled, ex: 1
-# arg3: port speed, ex: 1000
-# arg4: port duplex, ex: full
-# arg5: port autoneg, ex: on
-# arg6: port eee, ex: 0
-# arg7: port pause, ex: 0
-set_port_settings() {
-	local ifname="$1"
-	local enabled=$2
-	local speed="$3"
-	local duplex=$4
-	local autoneg=$5
-	local eee=$6
-	local pause=$7
-
-	[ -d /sys/class/net/$ifname ] || return
-
-	[ $autoneg -eq 1 ] && autoneg="on" || autoneg="off"
-	ethtool --change $ifname speed $speed duplex $duplex autoneg $autoneg
-
-	[ $eee -eq 1 ] && eee="on" || eee="off"
-	ethtool --set-eee $ifname eee $eee 2>/dev/null
-
-	case $pause in
-		off|0)
-			pause=0x0
-			auto=off
-			rx=off
-			tx=off
-		;;
-		on|1)
-			pause=0x2
-			auto=off
-			rx=on
-			tx=on
-		;;
-		auto)
-			pause=0x1
-			auto=on
-			rx=on
-			tx=on
-		;;
-		tx)
-			pause=0x3
-			auto=off
-			rx=off
-			tx=on
-		;;
-		rx)
-			pause=0x4
-			auto=off
-			rx=on
-			tx=off
-		;;
-	esac
-
-	ethtool --pause $ifname autoneg $auto rx $rx tx $tx 2>/dev/null
-
-	power_updown $ifname $enabled
-}

evoice/Makefile

@@ -1,106 +0,0 @@
-#
-# Copyright (C) 2022 IOPSYS Software Solutions AB
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=evoice
-PKG_VERSION:=0.2.39
-
-LOCAL_DEV=0
-LOCAL_DEV_EVOICE_DIR=~/voip/evoice
-
-ifneq ($(LOCAL_DEV),1)
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/evoice.git
-PKG_SOURCE_VERSION:=30d65330de0368f73ecf4a2e804c39a2ee280454
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_MIRROR_HASH:=skip
-endif
-
-PKG_LICENSE:=PROPRIETARY IOPSYS
-PKG_LICENSE_FILES:=LICENSE
-
-# All config variable that are passed to the make invocation, directly or
-# indirectly. This ensures that the package is rebuilt on config-changes.
-#PKG_CONFIG_DEPENDS:=CONFIG_TARGET_BOARD
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/$(PKG_NAME)
-	CATEGORY:=Network
-	SUBMENU:=Telephony
-	TITLE:=Ensemble Voice
-	URL:=
-	DEPENDS:= +libubox +libubus +libpicoevent +libuci +libstdcpp +libopenssl +libjson-c +libblobmsg-json\
-		+TARGET_brcmbca:bcmkernel\
-		+TARGET_airoha:kmod-voip_driver\
-		+TARGET_airoha:voip_app +libbbf_api
-endef
-
-define Package/$(PKG_NAME)/description
-	Ensemble Voice. A stand alone SIP VoIP application. 
-endef
-
-ifeq ($(LOCAL_DEV),1)
-# If you want to build the code from your own local repositiory enable
-# LOCAL_DEV and set LOCAL_DEV_EVOICE_DIR to your own git repository.
-define Build/Prepare
-	@echo "======================================================="
-	@echo "DEVELOPMENT BUILD! rsync $(LOCAL_DEV_EVOICE_DIR) to $(PKG_BUILD_DIR)"
-	@echo "======================================================="
-	rsync -a $(LOCAL_DEV_EVOICE_DIR)/* $(PKG_BUILD_DIR)/
-endef
-endif
-
-IDIR = $(STAGING_DIR)/usr/include
-TONES_INI_REQUIRED=
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	TARGET_PLATFORM=BROADCOM
-	BDIR = bcm963xx/userspace/private/apps/voice
-	CC_FLAGS = -I$(IDIR) -I$(IDIR)/$(BDIR)/inc\
-		-I$(IDIR)/bcm963xx/xchg/bos/publicInc\
-		-I$(IDIR)/bcm963xx/bcmdrivers/broadcom/include/bcm963xx
-	TRG=SVrgBcmFxs
-	JSONFILE=codecs_brcm.json
-else ifeq ($(CONFIG_TARGET_airoha),y)
-	TARGET_PLATFORM=ECONET
-	TONES_INI_REQUIRED=y
-	TRG=SVrgMtekOwrt
-	JSONFILE=codecs_airoha.json
-endif
-
-# disable temporarily some not important warnings, force PIC
-CC_FLAGS_VS=$(CC_FLAGS) -Wno-unused-parameter -Wno-unused-function -fPIC
-
-export TARGET_PLATFORM
-
-#used and altered by BIDE makefiles
-export _XFLAGS
-
-BIDE_MAKE_OPTS = -r -R -C $(PKG_BUILD_DIR) -f _bld/src/cdabs.mk\
-	SWB=b_gxxqca6 HWA=a_openwrt HWC=c_hosted OSP=p_posix LIF=cerder DBG=dbg
-
-define Build/Compile
-	@echo "TARGET_PLATFORM=${TARGET_PLATFORM}"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS)" TRG=$(TRG)
-
-	@echo "clean libvoiceservice before building shared lib!"
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice cleanall
-	+$(MAKE) $(BIDE_MAKE_OPTS) CC_FLAGS="$(CC_FLAGS_VS)" TRG=libvoiceservice
-endef
-
-define Package/evoice/install
-	$(CP) ./files/* $(1)/
-	$(if $(TONES_INI_REQUIRED),,$(RM) $(1)/etc/evoice/tones.ini)
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(CP) $(1)/lib/voice/$(JSONFILE) $(1)/lib/voice/codecs_evoice.json
-	$(RM) $(1)/lib/voice/codecs_brcm.json
-	$(RM) $(1)/lib/voice/codecs_airoha.json
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/evoice $(1)/usr/sbin/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/_bin/a_openwrt/libvoiceservice.so $(1)/usr/lib/bbfdm/
-endef
-
-$(eval $(call BuildPackage,evoice))

evoice/files/etc/config/voice

@@ -1,334 +0,0 @@
-
-config SIPClient 'Client1'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51234'
-	option AuthPassword '51234'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51234@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPClient 'Client2'
-	option Enable '1'
-	option RegisterMode 'RFC3261'
-	option AuthUserName '51235'
-	option AuthPassword '51235'
-	option Network 'Network1'
-	option MaxSessions '5'
-	option RegisiterURI '51235@sip-proxy.iopsys.eu'
-	option E164Format '1'
-
-config SIPNetwork 'Network1'
-	option Enable '1'
-	option ProxyServer 'sip-proxy.iopsys.eu'
-	option AcceptFromProxyOnly '0'
-	option ProxyServerPort '5060'
-	option ProxyServerTransport 'UDP'
-	option RegistrarServer 'sip-proxy.iopsys.eu'
-	option RegistrarServerPort '5060'
-	option RegistrarServerTransport 'UDP'
-	option RegistrationPeriod '3240'
-	option RegisterExpires '3600'
-	option UserAgentDomain ' '
-	option TimerRegistrationFailed '120'
-	option TimerT1 '500'
-	option VoIPProfile 'VoIPProfile1'
-	option SIPSessionTimerEnable '0'
-	option SIPSessionExpireInterval '1800'
-	option SIPSessionMinimumTimer '90'
-	option SIPSessionRefresher 'NONE'
-	option SIPSessionTimerMode 'REQUEST'
-	option SIPSessionRefreshRequest 'UPDATE'
-	list CodecList '1CodecProfile1'
-	list CodecList '1CodecProfile2'
-	list CodecList '1CodecProfile3'
-	list CodecList '1CodecProfile5'
-	list CodecList '1CodecProfile4'
-
-config CodecProfile '1CodecProfile1'
-	option Enable '1'
-	option Codec 'G.711ALaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile2'
-	option Enable '1'
-	option Codec 'G.711MuLaw'
-	option PacketizationPeriod '20'
-	option SilenceSupression '1'
-
-config CodecProfile '1CodecProfile3'
-	option Enable '1'
-	option Codec 'G.726'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile4'
-	option Enable '1'
-	option Codec 'G.722'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config CodecProfile '1CodecProfile5'
-	option Enable '1'
-	option Codec 'G.729'
-	option PacketizationPeriod '20'
-	option SilenceSupression '0'
-
-config VoIPProfile 'VoIPProfile1'
-	option Enable '1'
-	option DTMFMethod 'RFC4733'
-	option RTP '1RTP'
-
-config RTP '1RTP'
-	option LocalPortMin '10020'
-	option LocalPortMax '10039'
-	option JitterBufferType 'Static'
-
-config FXXPorts 'POTS'
-	option Region 'US'
-
-config FXSPorts 'FXS1'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config FXSPorts 'FXS2'
-	option Enable '1'
-	option DialType 'Tone'
-	option TransmitGain '0'
-	option ReceiveGain '0'
-	option EchoCancellationEnable '1'
-
-config Extension 'Extension1'
-	option Enable '1'
-	option ExtensionNumber '10#'
-	option Provider 'FXS1'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 1'
-
-config Extension 'Extension2'
-	option Enable '1'
-	option ExtensionNumber '11#'
-	option Provider 'FXS2'
-	option CallingFeatures 'Set1'
-	option Name 'Phone 2'
-
-config Line 'Line1'
-	option Enable '1'
-	option Provider 'Client1'
-	option CallingFeatures 'Set1'
-
-config Line 'Line2'
-	option Enable '1'
-	option Provider 'Client2'
-	option CallingFeatures 'Set2'
-
-config IncomingMap 'IncomingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config IncomingMap 'IncomingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config IncomingMap 'IncomingMap3'
-	option Enable '0'
-	option Extension 'Extension2'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap1'
-	option Enable '1'
-	option Extension 'Extension1'
-	option Line 'Line1'
-
-config OutgoingMap 'OutgoingMap2'
-	option Enable '1'
-	option Extension 'Extension2'
-	option Line 'Line2'
-
-config CallingFeatures 'Set1'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '0'
-
-config CallingFeatures 'Set2'
-	option CallerIDEnable '1'
-	option CallerIDNameEnable '1'
-	option CallForwardUnconditionalEnable '0'
-	option CallForwardUnconditionalNumber ' '
-	option CallForwardOnBusyEnable '0'
-	option CallForwardOnBusyNumber ' '
-	option CallForwardOnNoAnswerEnable '0'
-	option CallForwardOnNoAnswerRingTimeout '24'
-	option CallForwardOnNoAnswerNumber ' '
-	option CallTransferEnable '1'
-	option MWIEnable '1'
-	option VMWIEnable '1'
-	option LineMessagesWaiting '0'
-	option AnonymousCallRejectionEnable '0'
-	option AnonymousCallEnable '1'
-	option DoNotDisturbEnable '1'
-	option RepeatDialEnable '1'
-	option VoiceMailEnable '1'
-	option CallPickUpEnable '1'
-	option CCBSEnable '1'
-	option CallWaitingEnable '1'
-
-config NumberingPlan 'NumberingPlan1'
-	option MinimumNumberOfDigits '1'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-
-config NumberingPlan 'NumberingPlan2'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit ' '
-	list PrefixList '2PrefixInfo1'
-	list PrefixList '2PrefixInfo2'
-	list PrefixList '2PrefixInfo3'
-	list PrefixList '2PrefixInfo4'
-	list PrefixList '2PrefixInfo5'
-	list PrefixList '2PrefixInfo6'
-	list PrefixList '2PrefixInfo7'
-	list PrefixList '2PrefixInfo8'
-	list PrefixList '2PrefixInfo9'
-
-config NumberingPlan 'NumberingPlan3'
-	option MinimumNumberOfDigits '5'
-	option MaximumNumberOfDigits '15'
-	option InterDigitTimerStd '2000'
-	option InterDigitTimerOpen '2000'
-	option TerminationDigit '#'
-	list PrefixList '3PrefixInfo1'
-
-config PrefixInfo '2PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '*43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo2'
-	option Enable '1'
-	option PrefixRange '#43#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CW_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo3'
-	option Enable '1'
-	option PrefixRange '*21*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo4'
-	option Enable '1'
-	option PrefixRange '#21#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFU_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo5'
-	option Enable '1'
-	option PrefixRange '*67*(X+)#'
-	option PrefixMinNumberOfDigits '9'
-	option PrefixMaxNumberOfDigits '9'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo6'
-	option Enable '1'
-	option PrefixRange '#67#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFB_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo7'
-	option Enable '1'
-	option PrefixRange '*61*(X+(*X+)?)#'
-	option PrefixMinNumberOfDigits '15'
-	option PrefixMaxNumberOfDigits '15'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo8'
-	option Enable '1'
-	option PrefixRange '#61#'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CFNR_DEACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '2PrefixInfo9'
-	option Enable '1'
-	option PrefixRange '*31*'
-	option PrefixMinNumberOfDigits '4'
-	option PrefixMaxNumberOfDigits '4'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'CA_ACTIVATE'
-	option FacilityActionArgument ' '
-
-config PrefixInfo '3PrefixInfo1'
-	option Enable '1'
-	option PrefixRange '110|112'
-	option PrefixMinNumberOfDigits '7'
-	option PrefixMaxNumberOfDigits '7'
-	option NumberOfDigitsToRemove '0'
-	option PosOfDigitsToRemove '0'
-	option FacilityAction 'X_IOPSYS_EU_EMERGENCY'
-	option FacilityActionArgument ' '
-
-config DialPlan 'X_IOPSYS_EU_InternalNumber1'
-	option RegExp '1X#'
-

evoice/files/etc/evoice/voicedm

@@ -1,181 +0,0 @@
-# RO (Main)
-config account 'map_board'
-   option HW_Has_Voice 'hw.board.hasVoice'
-   option HW_Has_DECT 'hw.board.hasDect'
-   option HW_Nr_Of_POTS_Ports 'hw.board.VoicePorts'
-   option HW_VoiceDSP 'hw.board.VoiceDSP'
-   option ProductID 'device.deviceinfo.ModelName'
-   option I3_VERSION 'device.deviceinfo.SoftwareVersion'
-   option SerialNumber 'device.deviceinfo.SerialNumber'
-   
-config account 'map_pots'
-   option Country 'voice.POTS.Region'
-
-# Voice Service navigation paths
-# Not used to initialize internal configuration
-config navigation 'map_vs'
-   option Account 'voice.Client@.'
-   option Network 'voice.Client@.Network'
-   option VoIPProfile 'voice.Network@.VoIPProfile'
-   option CfAccount 'voice.Line@.CallingFeatures'
-   option CfPhone 'voice.Extension@.CallingFeatures'
-   option CodecList 'voice.Network@.CodecList'
-   option Codec 'voice.Codec@.Codec'
-   option OutgoingMapEnabled 'voice.OutgoingMap@.Enable'
-   option From_Phone 'voice.OutgoingMap@.Extension'
-   option Extension 'voice.Extension@.Provider'
-   option To_Account 'voice.OutgoingMap@.Line'
-   option Line 'voice.Line@.Provider'
-   option LineEnable 'voice.Line@.Enable'
-   option LineProvider 'voice.Line@.Provider'
-   option IncomingMapEnabled 'voice.IncomingMap@.Enable'
-   option From_Account 'voice.IncomingMap@.Line'
-   option To_Phone 'voice.IncomingMap@.Extension'
-   option ExtensionEnable 'voice.Extension@.Enable'
-   option ExtensionProvider 'voice.Extension@.Provider'
-
-# Registration for account A-Z is associate with SIP.Clienti.Enable    
-# All parameters in this table are written to internal configuration
-config account 'map_account'
-   option Registration 'voice.Client@.Enable'
-   option Display_Name ''
-   option PhoneNumber 'voice.Client@.RegisiterURI'
-   option Username 'voice.Client@.AuthUserName'
-   option Password 'voice.Client@.AuthPassword'
-   option SIP_Telephone_Syntax 'voice.Client@.E164Format'
-   option Device_Description 'voice.Client@.UserAgent'
-
-# Network stuff associated with an account.
-# All parameters in this table are written to internal configuration
-config network 'map_net'
-   option Enable                'voice.Network@.Enable'
-   option Registration_Server   'voice.Network@.RegistrarServer'
-   option Outbound_Proxy        'voice.Network@.ProxyServer'
-   option Accept_From_Registered 'voice.Network@.AcceptFromProxyOnly'
-   option SIP_Port              'voice.Network@.RegistrarServerPort'
-   option SIP_Transport         'voice.Network@.RegistrarServerTransport'
-   option RegistrationPeriod    'voice.Network@.RegistrationPeriod'
-   option Registration_Interval 'voice.Network@.RegisterExpires'
-   option Reg_Failure_Interval  'voice.Network@.TimerRegistrationFailed'
-   option T1                    'voice.Network@.TimerT1'
-   option UserAgentDomain       'voice.Network@.UserAgentDomain'
-   option SIP_SessTmrEnable     'voice.Network@.SIPSessionTimerEnable'
-   option SIP_SessTmrMode       'voice.Network@.SIPSessionTimerMode'
-   option SIP_SessTmrMsg        'voice.Network@.SIPSessionRefreshRequest'
-   option SIP_SessTmrRefresher  'voice.Network@.SIPSessionRefresher'
-   option SIP_MinSE             'voice.Network@.SIPSessionMinimumTimer'
-   option SIP_SessInterval      'voice.Network@.SIPSessionExpireInterval'
-
-config VoIPProfile 'map_voip'
-   option Enable 'voice.VoIPProfile@.Enable'
-   option DTMF_Method 'voice.VoIPProfile@.DTMFMethod'
-   option RTP 'voice.VoIPProfile@.RTP'
-
-config RTP 'map_rtp'
-   option RTP_Port_Base 'voice.@RTP@.LocalPortMin'
-   option RTP_Port_End 'voice.@RTP@.LocalPortMax'
-
-config codecs 'map_codec'
-   option Codec 'voice.CodecProfile@.Codec'
-   option enable 'voice.CodecProfile@.Enable'
-   option ptime 'voice.CodecProfile@.PacketizationPeriod'
-   option dtx 'voice.CodecProfile@.SilenceSupression'
-
-config fxsinfo 'map_fxs'
-   option Enable 'voice.FXS@.Enable'
-   option DialType 'voice.FXS@.DialType'
-   option TransmitGain 'voice.FXS@.TransmitGain'
-   option ReceiveGain  'voice.FXS@.ReceiveGain'
-   option EchoCancellationEnable 'voice.FXS@.EchoCancellationEnable'
-
-config extensioninfo 'map_ext'
-   option Enable 'voice.Extension@.Enable'
-   option Internal_Number_Phone 'voice.Extension@.ExtensionNumber'
-   option Display_Name_Phone 'voice.Extension@.Name'
-
-config capabilities 'map_capa'
-   option Call_Waiting_Enable 'voice.Capabilities@FacilityActions'
-   option Enable_Call_Diversion 'voice.Capabilities@FacilityActions'
-
-config cs_account 'map_set'
-   option BusyCallWait 'voice.Set@.CallWaitingEnable'
-   option AlwaysDivert 'voice.Set@.CallForwardUnconditionalEnable'
-   option CFU_Number 'voice.Set@.CallForwardUnconditionalNumber'
-   option BusyDivert 'voice.Set@.CallForwardOnBusyEnable'
-   option CFB_Number 'voice.Set@.CallForwardOnBusyNumber'
-   option NoAnswDivert 'voice.Set@.CallForwardOnNoAnswerEnable'
-   option CFNR_Number 'voice.Set@.CallForwardOnNoAnswerNumber'
-   option CFNR_Timeout 'voice.Set@.CallForwardOnNoAnswerRingTimeout'
-   option Enable_Call_Transfer 'voice.Set@.CallTransferEnable'
-   option AnonymousReject 'voice.Set@.AnonymousCallRejectionEnable'
-   option AllowAnonymousConf 'voice.Set@.AnonymousCallEnable'
-   option CallerIDEnable 'voice.Set@.CallerIDEnable'
-
-config cs_xvendor 'map_np_cs'
-   option np_sc_actCW 'voice.X_IOPSYS_EU_NpSc@.CW_ACT'
-   option np_sc_actCW_output 'voice.X_IOPSYS_EU_NpSc@.CW_OUT'
-   option np_sc_deactCW 'voice.X_IOPSYS_EU_NpSc@.CW_DEACT'
-   option np_sc_isactCW 'voice.X_IOPSYS_EU_NpSc@.CW_ISACT'
-   option np_sc_actCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_ACT'
-   option np_sc_actCFU_output 'voice.X_IOPSYS_EU_NpSc@.CFU_OUT'
-   option np_sc_deactCFU 'voice.X_IOPSYS_EU_NpSc@.CFU_DEACT'
-   option np_sc_actCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_ACT'
-   option np_sc_actCFB_output 'voice.X_IOPSYS_EU_NpSc@.CFB_OUT'
-   option np_sc_deactCFB 'voice.X_IOPSYS_EU_NpSc@.CFB_DEACT'
-   option np_sc_actCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_ACT'
-   option np_sc_actCFNR_output 'voice.X_IOPSYS_EU_NpSc@.CFNR_OUT'
-   option np_sc_deactCFNR 'voice.X_IOPSYS_EU_NpSc@.CFNR_DEACT'
-   option np_sc_actRA 'voice.X_IOPSYS_EU_NpSc@.RA_ACT'
-   option np_sc_deactRA 'voice.X_IOPSYS_EU_NpSc@.RA_DEACT'
-   option np_sc_actAC 'voice.X_IOPSYS_EU_NpSc@.AC_ACT'
-   option np_sc_deactAC 'voice.X_IOPSYS_EU_NpSc@.AC_DEACT'
-   option np_sc_actAA 'voice.X_IOPSYS_EU_NpSc@.AA_ACT'
-   option np_sc_deactAA 'voice.X_IOPSYS_EU_NpSc@.AA_DEACT'
-   option np_sc_actAD 'voice.X_IOPSYS_EU_NpSc@.AD_ACT'
-   option np_sc_actAD_output 'voice.X_IOPSYS_EU_NpSc@.AD_OUT'
-   option np_sc_deactAD 'voice.X_IOPSYS_EU_NpSc@.AD_DEACT'
-   option np_sc_actMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_ACT'
-   option np_sc_deactMWSplash 'voice.X_IOPSYS_EU_NpSc@.MWI_SPLASH_DEACT'
-   option np_sc_actMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_ACT'
-   option np_sc_deactMWTone 'voice.X_IOPSYS_EU_NpSc@.MWI_TONE_DEACT'
-   option np_sc_redial 'voice.X_IOPSYS_EU_NpSc@.REDIAL'
-   option np_sc_setMiscConf 'voice.X_IOPSYS_EU_NpSc@.SET_MISC'
-
-config cc_xvendor 'map_np_in'
-   option np_in_limitExp 'voice.X_IOPSYS_EU_InternalNumber@.RegExp'
-
-config cc_xvendor 'map_np_sh'
-   option sh_no_str 'voice.X_IOPSYS_EU_ShortNumber@.RegExp'
-
-config cc_xvendor 'map_np_eme'
-   option np_eme 'voice.X_IOPSYS_EU_EmergencyNumber@.RegExp'
-   option np_eme_out 'voice.X_IOPSYS_EU_EmergencyNumber@.OutStr'
-
-config cc_xvendor 'map_np_rn'
-   option np_rn 'voice.X_IOPSYS_EU_RegularNumber@.RegExp'
-   option np_rn_out 'voice.X_IOPSYS_EU_RegularNumber@.OutStr'
-   option np_rn_account 'voice.X_IOPSYS_EU_RegularNumber@.AccStr'
-
-config cc_xvendor 'map_np_bn'
-   option np_bn 'voice.X_IOPSYS_EU_BarredNumber@.RegExp'
-   option np_bn_out 'voice.X_IOPSYS_EU_BarredNumber@.OutStr'
-
-config TR104NumberingPlan 'map_np_tr'
-   option min_digits 'voice.NumberingPlan@.MinimumNumberOfDigits'
-   option max_digits 'voice.NumberingPlan@.MaximumNumberOfDigits'
-   option tmo_std 'voice.NumberingPlan@.InterDigitTimerStd'
-   option tmo_open 'voice.NumberingPlan@.InterDigitTimerOpen'
-   option term_digit 'voice.NumberingPlan@.TerminationDigit'
-   option prefix_list 'voice.NumberingPlan@.PrefixList'
-
-config TR104NumberingPlanPrefix 'map_np_pf'
-   option enable 'voice.@PrefixInfo@.Enable'
-   option range 'voice.@PrefixInfo@.PrefixRange'
-   option prefix_min_digits 'voice.@PrefixInfo@.PrefixMinNumberOfDigits'
-   option prefix_max_digits 'voice.@PrefixInfo@.PrefixMaxNumberOfDigits'
-   option remove_digits 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option remove_pos 'voice.@PrefixInfo@.NumberOfDigitsToRemove'
-   option facility_act 'voice.@PrefixInfo@.FacilityAction'
-   option facility_arg 'voice.@PrefixInfo@.FacilityActionArgument'
-
-

evoice/files/etc/evoice/voicero

@@ -1,56 +0,0 @@
-config static_prm 'defaults'
-   option Print_Control '4'
-   option Print_UDP_Addr '192.168.1.3'
-   option Print_UDP_Port '60000'
-   option Verbosity 'On'
-   option Failure_Log 'On'
-   option Message_Log 'On'
-   option Method_Trace 'Off'
-   option Dial_Cache_Size '0'
-   option Reverse_Fax_Detection '0'
-   option DSP_24 '0'
-   option DSP_36 '0'
-   option DSP_43 '0'
-   option Swap_Name_Nr_CID '0'
-   option R_Button_Lower_Lim '100'
-   option R_Button_Upper_Lim '800'
-   option HookOn_Delay '0'
-   option SupportLDD '0'
-   option LDD_Min_Break_Time '41'
-   option LDD_Max_Break_Time '94'
-   option LDD_Percent_Break '55'
-   option Tone_On_Hangup '1'
-   option BusyTone_On_Hangup '1'
-   option Enable_Analouge_Conf '0'
-   option PrackUsage '1'
-   option SIP_SupportedPath '0'
-   option IMS_Access_Network_Info ' '
-   option SIP_Reason_Protocol '0'
-   option SIP_Body_QOST '0'
-   option SIP_HistoryInfo '0'
-   option Customer_Spec2 '1'
-   option UTF8_Enable '0'
-   option RFC3325 '0'
-   option Accept_From_Registered '0'
-   option Polarity_Reversal '0'
-   option Closed_Dial_Plan '0'
-   option Netw_Dial '0'
-   option No_Answer_Tmo '180'
-   option UPnP_Enabled '0'
-   option NAT_Address ' '
-   option NAT_Address_From_SIP '0'
-   option HookOn_Transfer '0'
-   option Enable_Call_Transfer '1'
-   option CallerIDEnable '1'
-   option Multiparty_Transp '0'
-   option Presence_Indication '0'
-   option Login_Note ' '
-   option Login_Description ' '
-   option Logout_Note ' '
-   option Logout_Description ' '
-   option Resolve_Every_Transaction '2'
-   option Translate_Plus '1'
-   option Mid_Call_Services '0'
-   option Account_Restriction '0'
-   option Answering_Machine_Enable '0'
-

evoice/files/etc/init.d/evoice

@@ -1,32 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=68
-STOP=12
-
-USE_PROCD=1
-NAME=evoice
-VOICE_UCI_CONFIG=voice
-
-start_service() {
-	[ "$(db -q get hw.board.hasVoice)" = "1" ] || return
-
-
-	which endptmngr >/dev/null 2>&1 && {
-		echo "evoice can't be started since endptmngr is installed. Please remove endptmngr and retry"
-		return
-	}
-
-	procd_open_instance
-	procd_set_param command $NAME
-	procd_set_param respawn "5" "0" "3"
-	procd_close_instance
-}
-
-reload_service() {
-	stop
-	start
-}
-
-service_triggers() {
-	procd_add_reload_trigger $VOICE_UCI_CONFIG
-}

evoice/files/lib/voice/codecs_airoha.json

@@ -1,50 +0,0 @@
-{
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "20",
-			"SilenceSuppression": false
-		}
-	]
-}
-

evoice/files/lib/voice/codecs_brcm.json

@@ -1,140 +0,0 @@
-{
-	"G.711MuLaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.711ALaw": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.726": [
-		{
-			"BitRate": 16000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 24000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 32000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 40000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.723.1": [
-		{
-			"BitRate": 5300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.729": [
-		{
-			"BitRate": 8000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"iLBC": [
-		{
-			"BitRate": 15200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 13300,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"G.722": [
-		{
-			"BitRate": 64000,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"AMR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 10200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7950,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 7400,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 6700,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5900,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 5150,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		},
-		{
-			"BitRate": 4750,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-EFR": [
-		{
-			"BitRate": 12200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-FR": [
-		{
-			"BitRate": 13200,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	],
-	"GSM-HR": [
-		{
-			"BitRate": 5600,
-			"PacketizationPeriod": "10-30",
-			"SilenceSuppression": true
-		}
-	]
-}
-

fdtextract/Makefile

@@ -12,7 +12,7 @@ PKG_VERSION:=1.0
 
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/fdtextract.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=e3cefda3b26c9aea3021b20725ce7b31b33eebc4
+PKG_SOURCE_VERSION:=45575262de7a9690bcb2c760f35e2c74e88e1176
 PKG_MIRROR_HASH:=skip
 
 PKG_LICENSE:=GPLv2
@@ -38,6 +38,9 @@ define Package/$(PKG_NAME)/description
 	Command to extract sub images from FIT images.
 endef
 
+MAKE_FLAGS += \
+	CFLAGS+="-Wall"
+
 define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 

gryphon-led-module/Makefile

@@ -28,7 +28,6 @@ define KernelPackage/$(PKG_NAME)
   FILES:=$(PKG_BUILD_DIR)/$(PKG_NAME).$(LINUX_KMOD_SUFFIX)
   KCONFIG:=CONFIG_PACKAGE_kmod-gryphon-led-kernel-module=y
   AUTOLOAD:=$(call AutoLoad,60,$(PKG_NAME))
-  DEPENDS:= +(TARGET_brcmbca):bcmkernel
   PKG_LICENSE:=GPLv2
   PKG_LICENSE_URL:=
 endef
@@ -41,33 +40,6 @@ EXTRA_KCONFIG:= CONFIG_RGB_LED=m
 
 MODULE_INCLUDE=-I$(PKG_BUILD_DIR)
 
-
-ifeq ($(CONFIG_TARGET_brcmbca),y)
-	LINUX_DIR:=$(BUILD_DIR)/bcmkernel/bcm963xx/kernel/linux-4.19
-	# This assumes that the MODULES_SUBDIR set by OpenWrt is of the form
-	# lib/modules/4.19.235-abcdef where 4.19.235 is the version of our fake bcmlinux kernel
-	# and abcdef the git-commit.
-	# The kernel compiled by the Broadcom SDK has a uname -r of 4.19.235, i.e. without the git-commit.
-	# The assignment below removes the part after the - which puts modules in the right directory as
-	# long as the bcmlinux version matches the kernel version in the BCM SDK.
-	# So, this will only stop working in the time window where the BCM SDK has been updated
-	# but bcmlinux has not yet been updated.
-	MODULES_SUBDIR:=$(firstword $(subst -, ,$(MODULES_SUBDIR)))
-	TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARM_TOOLCHAIN_PREFIX)-
-
-	ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"63158" "6856" "6858"))
-		# These targets use a 64-bit kernel
-		LINUX_KARCH:=arm64
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_AARCH64_TOOLCHAIN_PREFIX)-
-	else ifeq ($(CONFIG_BCM_CHIP_ID),$(filter $(CONFIG_BCM_CHIP_ID),"6855" "6756" "47622" "63148" "63178"))
-		# These targets use a 32-bit arm-sfp kernel
-		LINUX_KARCH:=arm
-		TARGET_CROSS:=$(CONFIG_BRCM_ALT_TOOLCHAIN_BASE)/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_TOPDIR)/bin/$(CONFIG_BRCM_ALT_ARMSFP_TOOLCHAIN_PREFIX)-
-	endif
-	# For some reason, Broadcom's kernel does not set the include paths correctly when compiling out-of-tree modules
-	EXTRA_KCPPFLAGS:="-I $(LINUX_DIR)/../bcmkernel/include -I $(LINUX_DIR)/arch/arm/mach-bcm963xx/include"
-endif
-
 define Build/Prepare
 	mkdir -p $(PKG_BUILD_DIR)/kdevlinks/
 	$(CP) -s `pwd`/src/* $(PKG_BUILD_DIR)/kdevlinks/

gryphon-led-module/src/main.c

@@ -220,6 +220,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	}
 
@@ -227,6 +228,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->clock_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire clock GPIO %ld\n",
 				PTR_ERR(leds->clock_gpio));
+		leds->clock_gpio = NULL;
 		return PTR_ERR(leds->clock_gpio);
 	} else {
 		printk(KERN_INFO "Got clock gpio\n");
@@ -244,6 +246,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	}
 
@@ -251,6 +254,7 @@ static int canyon_led_probe(struct platform_device *pdev)
 	if (IS_ERR(leds->data_gpio)) {
 		dev_err(&pdev->dev, "Failed to acquire data GPIO %ld\n",
 				PTR_ERR(leds->data_gpio));
+		leds->data_gpio = NULL;
 		return PTR_ERR(leds->data_gpio);
 	} else {
 		printk(KERN_INFO "Got data gpio\n");

icwmp/Config_cwmp.in

@@ -0,0 +1,23 @@
+if PACKAGE_icwmp
+
+choice
+	prompt "Select ACS sever"
+	default CWMP_ACS_MULTI
+
+config CWMP_ACS_MULTI
+	bool "No specific ACS, follow standard"
+
+config CWMP_ACS_HDM
+	bool "HDM"
+endchoice
+
+config CWMP_DEBUG
+	bool "Compile with debug options"
+	default y
+
+config CWMP_DEVEL_DEBUG
+	bool "Compile with development debug options"
+	default n
+
+endif
+

icwmp/Makefile

@@ -1,73 +1,52 @@
 #
-# Copyright (C) 2020-2022 IOPSYS Software Solutions AB
+# Copyright (C) 2020 iopsys Software Solutions AB
 #
-# This is free software, licensed under the BSD-3-Clause
+# This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
 #
 
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=9.1.19
-
-PKG_SOURCE_PROTO:=git
+PKG_VERSION:=8.2.0-2021-10-05
+PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
-PKG_SOURCE_VERSION:=9d8389cda16f410826920bb27fd8af4d28c79de9
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=ab875277578d851a9f8eed57883ca05c886b127d
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_HASH:=skip
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
 
-PKG_RELEASE=$(PKG_SOURCE_VERSION)
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=COPYING
 
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_CWMP_ACS_MULTI \
+	CONFIG_CWMP_ACS_HDM \
+	CONFIG_CWMP_DEBUG \
+	CONFIG_CWMP_DEVEL_DEBUG
+
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
 
-define Package/icwmp/default
+define Package/$(PKG_NAME)
   SECTION:=utils
   CATEGORY:=Utilities
   SUBMENU:=TRx69
-  TITLE:=TR069 CWMP client
-  DEPENDS:=+libuci +libubox +libblobmsg-json +libubus +libjson-c +libcurl +mxml +libuuid +libbbf_api
+  TITLE:=CWMP client
+  DEPENDS:=+libuci +libmicroxml +libubox +jshn +libubus +libblobmsg-json +libpthread +ubusd +shflags +getopt +zlib +libjson-c +libopenssl +curl +libcurl
 endef
 
-define Package/icwmp-openssl
-  $(Package/icwmp/default)
-  TITLE += (openssl)
-  DEPENDS += +PACKAGE_icwmp-openssl:libopenssl
-  VARIANT:=openssl
+define Package/$(PKG_NAME)/description
+ A free client implementation of CWMP (TR-069) protocol
 endef
 
-define Package/icwmp-wolfssl
-  $(Package/icwmp/default)
-  TITLE += (wolfssl)
-  DEPENDS += +PACKAGE_icwmp-wolfssl:libwolfssl
-  CONFLICTS := icwmp-openssl
-  VARIANT:=wolfssl
+define Package/$(PKG_NAME)/config
+	source "$(SOURCE)/Config_cwmp.in"
 endef
 
-define Package/icwmp-mbedtls
-  $(Package/icwmp/default)
-  TITLE += (mbedtls)
-  DEPENDS += +PACKAGE_icwmp-mbedtls:libmbedtls
-  CONFLICTS := icwmp-openssl icwmp-wolfssl
-  VARIANT:=mbedtls
-  DEFAULT_VARIANT:=1
-endef
-
-ifeq ($(BUILD_VARIANT),openssl)
-CMAKE_OPTIONS += -DWITH_OPENSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),wolfssl)
-CMAKE_OPTIONS += -DWITH_WOLFSSL=ON
-endif
-
-ifeq ($(BUILD_VARIANT),mbedtls)
-CMAKE_OPTIONS += -DWITH_MBEDTLS=ON
-endif
-
 USE_LOCAL=$(shell ls ./src/ 2>/dev/null >/dev/null && echo 1)
 ifneq ($(USE_LOCAL),)
 define Build/Prepare
@@ -75,34 +54,47 @@ define Build/Prepare
 endef
 endif
 
-define Package/icwmp/default/install
+TARGET_CFLAGS += \
+	-D_GNU_SOURCE \
+	"-DCWMP_REVISION=\\\"$(PKG_SOURCE_VERSION)\\\""
+
+ifeq ($(CONFIG_CWMP_ACS_MULTI),y)
+CONFIGURE_ARGS += \
+	--enable-acs=multi
+endif
+
+ifeq ($(CONFIG_CWMP_ACS_HDM),y)
+CONFIGURE_ARGS += \
+	--enable-acs=hdm
+endif
+
+ifeq ($(CONFIG_CWMP_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-debug
+endif
+
+ifeq ($(CONFIG_CWMP_DEVEL_DEBUG),y)
+CONFIGURE_ARGS += \
+	--enable-devel
+endif
+
+define Package/$(PKG_NAME)/install
 	$(INSTALL_DIR) $(1)/etc/icwmpd
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_DIR) $(1)/etc/config
+	$(INSTALL_DIR) $(1)/etc/hotplug.d/iface
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
 	$(INSTALL_DIR) $(1)/lib/upgrade/keep.d
-	$(INSTALL_DIR) $(1)/etc/bbfdm/json/
-	$(INSTALL_DIR) $(1)/etc/udhcpc.user.d
-	$(INSTALL_DIR) $(1)/usr/lib/bbfdm
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libcwmpdm.so $(1)/usr/lib/bbfdm/libcwmpdm.so
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/icwmpd $(1)/usr/sbin/icwmpd
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/bin/icwmpd $(1)/usr/sbin/icwmpd
 	$(INSTALL_DATA) ./files/etc/config/cwmp $(1)/etc/config/cwmp
 	$(INSTALL_BIN) ./files/etc/firewall.cwmp $(1)/etc/firewall.cwmp
+	$(INSTALL_BIN) ./files/etc/hotplug.d/iface/90-icwmp $(1)/etc/hotplug.d/iface/90-icwmp
 	$(INSTALL_BIN) ./files/etc/init.d/icwmpd $(1)/etc/init.d/icwmpd
 	$(INSTALL_BIN) ./files/etc/uci-defaults/85-cwmp-set-userid $(1)/etc/uci-defaults/
 	$(INSTALL_BIN) ./files/etc/uci-defaults/90-cwmpfirewall $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts $(1)/etc/uci-defaults/
 	$(INSTALL_DATA) ./files/lib/upgrade/keep.d/icwmp $(1)/lib/upgrade/keep.d/icwmp
-	$(INSTALL_BIN) ./files/etc/icwmpd/update.sh $(1)/etc/icwmpd/update.sh
-	$(INSTALL_DATA) ./files/etc/bbfdm/json/CWMPManagementServer.json $(1)/etc/bbfdm/json/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt125.user
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user $(1)/etc/udhcpc.user.d/udhcpc_icwmp_opt43.user
 endef
 
-Package/icwmp-openssl/install = $(Package/icwmp/default/install)
-Package/icwmp-wolfssl/install = $(Package/icwmp/default/install)
-Package/icwmp-mbedtls/install = $(Package/icwmp/default/install)
-
-$(eval $(call BuildPackage,icwmp-openssl))
-$(eval $(call BuildPackage,icwmp-wolfssl))
-$(eval $(call BuildPackage,icwmp-mbedtls))
+$(eval $(call BuildPackage,$(PKG_NAME)))

icwmp/files/etc/bbfdm/json/CWMPManagementServer.json

@@ -1,36 +0,0 @@
-{
-	"json_plugin_version": 1,
-	"Device.CWMPManagementServer.": {
-		"type": "object",
-		"version": "2.15",
-		"protocols": [
-			"usp"
-		],
-		"access": false,
-		"array": false,
-		"dependency": "file:/etc/config/cwmp",
-		"EnableCWMP": {
-			"type": "boolean",
-			"version": "2.15",
-			"read": true,
-			"write": true,
-			"protocols": [
-				"usp"
-			],
-			"mapping": [
-				{
-					"type": "uci",
-					"uci": {
-						"file": "cwmp",
-						"section": {
-							"name": "cpe"
-						},
-						"option": {
-							"name": "enable"
-						}
-					}
-				}
-			]
-		}
-	}
-}

icwmp/files/etc/config/cwmp

@@ -1,9 +1,11 @@
 config acs 'acs'
+	option url ''
 	option userid '' #$OUI-$SER
 	option passwd 'iopsys'
 	option periodic_inform_enable 'true'
 	option periodic_inform_interval '1800'
 	option periodic_inform_time '0001-01-01T00:00:00Z'
+	option ParameterKey ''
 	option dhcp_discovery 'enable'
 	# compression possible configs: GZIP, Deflate, Disabled
 	option compression 'Disabled'
@@ -11,15 +13,15 @@ config acs 'acs'
 	option retry_min_wait_interval '5'
 	#­ possible configs interval :[1000:65535]
 	option retry_interval_multiplier '2000'
+	option https_ssl_capath ''
 	option ipv6_enable '0'
 	option ip_version '4'
 
 config cpe 'cpe'
-	option enable '1'
+	option interface 'eth0.1'
 	option default_wan_interface 'wan'
-	option default_lan_interface 'lan'
 	option log_to_console 'disable'
-	option log_to_file 'disable'
+	option log_to_file 'enable'
 	# log_severity: INFO (Default)	
 	# log_severity possible configs: EMERG, ALERT, CRITIC ,ERROR, WARNING, NOTICE, INFO, DEBUG
 	option log_severity 'INFO'
@@ -32,13 +34,12 @@ config cpe 'cpe'
 	option amd_version '5'
 	# compression possible configs: InstanceNumber, InstanceAlias
 	option instance_mode 'InstanceNumber'
-	option session_timeout '300'
+	option session_timeout '60'
 	option notification '1'
 	option exec_download '0'
 	option periodic_notify_enable '1'
 	option periodic_notify_interval '10'
 	option incoming_rule 'Port_Only'
-	option active_notif_throttle '0'
 	
 config lwn 'lwn'
 	option enable '1'

icwmp/files/etc/firewall.cwmp

@@ -1,41 +1,42 @@
-#!/bin/sh
-
 #created by the icwmp package
-log() {
-	echo "${@}"|logger -t firewall.cwmp -p info
-}
 
 if [ ! -f "/var/state/cwmp" ]; then
 	exit 0;
 fi
 
 zone_name=$(uci -c /var/state -q get cwmp.acs.zonename)
-port=$(uci -q get cwmp.cpe.port)
+port=$(uci -c /var/state -q get cwmp.acs.port)
 ipaddr=$(uci -c /var/state -q get cwmp.acs.ip)
-ip6addr=$(uci -c /var/state -q get cwmp.acs.ip6)
-incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr 'A-Z' 'a-z')
+ipv6enable=$(uci -c /var/state -q get cwmp.acs.ipv6_enable)
+incoming_rule=$(uci -q get cwmp.cpe.incoming_rule|tr [A-Z] [a-z])
 
-if [ -z "${zone_name}" ]; then
-	log "empty firewall zone name"
+if [ "$zone_name" = "" ]; then
 	exit 0
 elif [ "$zone_name" = "icwmp" ]; then
 	iptables -nL zone_icwmp_input 2> /dev/null
-	if [ "$?" != 0 ]; then
-		iptables -w 1 -N zone_icwmp_input
-		iptables -w 1 -t filter -A INPUT -j zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
+	if [ $? != 0 ]; then
+		iptables -N zone_icwmp_input
+		iptables -t filter -A INPUT -j zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	else			
-		iptables -w 1 -F zone_icwmp_input
-		iptables -w 1 -I zone_icwmp_input -p tcp --dport "${port}" -j REJECT
+		iptables -F zone_icwmp_input
+		iptables -I zone_icwmp_input -p tcp --dport $port -j REJECT
 	fi			
 else
-	iptables -w 1 -F zone_icwmp_input 2> /dev/null
-	iptables -w 1 -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
-	iptables -w 1 -X zone_icwmp_input 2> /dev/null
+	iptables -F zone_icwmp_input 2> /dev/null
+	iptables -t filter -D INPUT -j zone_icwmp_input 2> /dev/null
+	iptables -X zone_icwmp_input 2> /dev/null
 fi
 
-cmd="iptables -w 1 -I zone_${zone_name}_input -p tcp"
-cmd6="ip6tables -w 1 -I zone_${zone_name}_input -p tcp"
+cmd=""
+
+if [ "${ipv6enable}" = "1" ]; then
+	cmd="ip6tables"
+else
+	cmd="iptables"
+fi
+
+cmd="${cmd} -I zone_${zone_name}_input -p tcp"
 
 # default incoming rule is Port only
 if [ -z "${incoming_rule}" ]; then
@@ -45,36 +46,26 @@ fi
 if [ "${incoming_rule}" = "ip_only" ]; then
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 elif [ "${incoming_rule}" = "port_only" ]; then
 	if [ -n "${port}" ]; then
 		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
 	fi
 else
 	if [ -n "${ipaddr}" ]; then
 		cmd="${cmd} -s ${ipaddr}"
-		cmd6="${cmd6} -s ${ip6addr}"
 	fi
 
 	if [ -n "${port}" ]; then
 		cmd="${cmd} --dport ${port}"
-		cmd6="${cmd6} --dport ${port}"
 	fi
 fi
 
-echo "${cmd}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd}
+echo ${cmd}|grep -q "\-\-dport \|\-s "
+if [ "$?" -ne 0 ]; then
+	exit 0;
 fi
 
-echo "${cmd6}"|grep -q "\-\-dport \|\-s "
-if [ "$?" -eq 0 ]; then
-	cmd6="${cmd6} -j ACCEPT -m comment --comment=Open_ACS_port"
-	${cmd6}
-fi
+cmd="${cmd} -j ACCEPT -m comment --comment=Open_ACS_port"
 
-uci -c /var/state -q set cwmp.cpe.firewall_restart="init"
-uci -c /var/state -q commit cwmp
+${cmd}

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -0,0 +1,120 @@
+#!/bin/sh
+
+. /lib/functions/network.sh
+
+
+[ "$ACTION" == "ifup" ] || exit 0
+
+[ -f /etc/config/cwmp ] || exit 0
+
+handle_icwmp_restart() {
+	[ -f /tmp/switching_mode ] && exit 0
+	[ -f /tmp/wificontrol.txt -a -f /tmp/netmode-conf.pid ] && exit 0
+
+	[ "$INTERFACE" == "loopback" ] && exit 0
+
+	local defwan=$(uci -q get cwmp.cpe.default_wan_interface)
+	[ -n "$defwan" -a "$(uci -q get network.$defwan)" == "interface" -a "$defwan" != "$INTERFACE" ] && exit 0
+
+	local islan="$(uci -q get network.$INTERFACE.is_lan)"
+	[ "$islan" == "1" ] && exit 0
+
+	local proto="$(uci -q get network.$INTERFACE.proto)"
+	[ "$proto" == "none" ] && exit 0
+
+	local ifname="$(uci -q get network.$INTERFACE.ifname)"
+	[ "${ifname:0:1}" == "@" ] && exit 0
+	
+	mkdir -p /tmp/ipv4
+
+	network_flush_cache
+
+	local previpaddr=""
+	local curipaddr=""
+	local ipaddrfile=/tmp/ipv4/$INTERFACE-ipaddr
+	previpaddr=$(cat $ipaddrfile 2>/dev/null)
+	network_get_ipaddr curipaddr $INTERFACE
+	[ -n "$curipaddr" ] && echo $curipaddr > $ipaddrfile || rm -f $ipaddrfile
+
+	local prevgateway=""
+	local curgateway=""
+	local gatewayfile=/tmp/ipv4/$INTERFACE-gateway
+	prevgateway=$(cat $gatewayfile 2>/dev/null)
+	network_get_gateway curgateway $INTERFACE
+	[ -n "$curgateway" ] && echo $curgateway > $gatewayfile || rm -f $gatewayfile
+
+	local prevsubnets=""
+	local cursubnets=""
+	local subnetsfile=/tmp/ipv4/$INTERFACE-subnets
+	prevsubnets=$(cat $subnetsfile 2>/dev/null)
+	network_get_subnets cursubnets $INTERFACE
+	[ -n "$cursubnets" ] && echo $cursubnets > $subnetsfile || rm -f $subnetsfile
+
+	local prevdnsservers=""
+	local curdnsservers=""
+	local dnsserverfile=/tmp/ipv4/$INTERFACE-dnsservers
+	prevdnsservers=$(cat $dnsserverfile 2>/dev/null)
+	network_get_dnsserver curdnsservers $INTERFACE
+	[ -n "$curdnsservers" ] && echo $curdnsservers > $dnsserverfile || rm -f $dnsserverfile
+
+	local prevdev=""
+	local curdev=""
+	local devfile=/tmp/ipv4/$INTERFACE-dev
+	prevdev=$(cat $devfile 2>/dev/null)
+	network_get_device curdev $INTERFACE
+	[ -n "$curdev" ] && echo $curdev > $devfile || rm -f $devfile
+
+	local wan_iface=`uci get cwmp.cpe.default_wan_interface`
+	local vendorspecinf=`ubus call network.interface.wan status | jsonfilter -e "@.data.vendorspecinf"`
+	[ -n "$vendorspecinf" ] && {
+		local url=""
+		case $vendorspecinf in
+			http://*|https://*)
+					url="$vendorspecinf"
+				;;
+			*)
+				for optval in $vendorspecinf; do
+				        case $optval in
+				                1=*)
+				                        url="$(echo $optval | cut -d"=" -f2-)"
+				                ;;
+				        esac
+				done
+			;;
+		esac
+		if [ ! -f /var/state/cwmp ]; then
+			touch /var/state/cwmp
+		fi
+		uci -q -c /var/state/ get cwmp.acs
+		if [ "$?" -ne 0 ]; then
+			unnamed=`uci -q -c /var/state/ add cwmp acs`
+			uci -c /var/state/ -q rename cwmp.$unnamed='acs'
+		fi
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.dhcp_url="$url"
+		uci -c /var/state commit cwmp
+	}
+                
+	local prevopt43url=""
+	local curopt43url=""
+	local opt43urlfile=/tmp/ipv4/$INTERFACE-opt43url
+	prevopt43url=$(cat $opt43urlfile 2>/dev/null)
+	curopt43url="$(uci -c /var/state -q get cwmp.acs.dhcp_url)"
+	[ -n "$curopt43url" ] && echo $curopt43url > $opt43urlfile || rm -f $opt43urlfile
+
+	[ \
+		"$prevdev" == "$curdev" -a \
+		"$previpaddr" = "$curipaddr" -a \
+		"$prevgateway" = "$curgateway" -a \
+		"$prevsubnets" = "$cursubnets" -a \
+		"$prevdnsservers" = "$curdnsservers" \
+	] && {
+		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
+		[ -z "$prevopt43url" ] && exit 0
+	}
+
+	echo "Restarting icwmp"|logger -t cwmp.hotplug -p info
+
+	/etc/init.d/icwmpd reload &
+}
+
+handle_icwmp_restart

icwmp/files/etc/icwmpd/update.sh

@@ -1,32 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-log() {
-	echo "$@" |logger -t cwmp.update -p info
-}
-
-handle_icwmp_update() {
-	local cwmp_enable
-	config_load cwmp
-
-	config_get_bool cwmp_enable cpe enable 1
-	if [ "$cwmp_enable" = "0" ]; then
-		return 0
-	fi
-
-	ret=$(ubus call service list '{"name":"icwmpd"}' | jsonfilter -qe '@.icwmpd.instances.icwmp.running')
-
-	if [ "$ret" = "true" ]; then
-		# read status from var/state/cwmp
-		status=$(uci -q -c /var/state get cwmp.sess_status.current_status)
-		if [ "$status" != "running" ]; then
-			log "Trigger out of bound inform, since last inform status was failure"
-			ubus -t 10 call tr069 inform >/dev/null 2>&1
-		fi
-	else
-		log "Restarting icwmp tr069 object"
-		/etc/init.d/icwmpd restart
-	fi
-}
-
-handle_icwmp_update "$@"

icwmp/files/etc/init.d/icwmpd

@@ -1,268 +1,129 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2015-2019 iopsys Software Solutions AB
 
+. /lib/functions.sh
+include /lib/network
+. /usr/share/libubox/jshn.sh
+
 START=99
-STOP=00
+STOP=10
 
 USE_PROCD=1
 PROG="/usr/sbin/icwmpd"
 
-. /lib/functions.sh
-. /usr/share/libubox/jshn.sh
-include /lib/network
+EXTRA_HELP="	start	[GetRPCMethods] Start icwmpd service and send GetRPCMethods"
 
 log() {
 	echo "${@}"|logger -t cwmp.init -p info
 }
 
-regenerate_ssl_link()
-{
-	local cert_dir all_file rehash
+validate_url() {
+	# SCHEMA_LIST: contain list of possible schemas that could be present in the acs url
+	# Example: SCHEMA_LIST="http https"
+	SCHEMA_LIST="http"
 
-	cert_dir="${1}"
-	[ ! -d "${cert_dir}" ] && return 0;
+	for schema in $SCHEMA_LIST;	do
+		dest=`echo $1 | sed 's/$schema:\/\///g' | cut -f1 -d \/ | cut -f1 -d:`
+		if [ "_$dest" != "_" ]; then
+			return 0
+		fi
+	done
+	return 1
+}
 
-	### Generate all ssl link for pem certicates ###
-	all_file=$(ls "${cert_dir}"/*.pem 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+get_acs_url() {
+	local default_acs="http://10.10.1.6:8000/openacs/acs"
+	local acs_dhcp_discovery="$(uci -q get cwmp.acs.dhcp_discovery)"
+	local url="$(uci -q get cwmp.acs.url)"
+	local dhcp_url="$(uci -c /var/state -q get cwmp.acs.dhcp_url)"
+
+	if [ "$acs_dhcp_discovery" == "enable" -a -n "$dhcp_url" -o -z "$url" ]; then
+		url="$dhcp_url"
+		log "ACS URL from DHCP server: $url"
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.url="$url" || url="$default_acs"
+	elif [ -n "$url" ];then
+		url="$(uci -q get cwmp.acs.url)"
+		log "ACS URL from configuration: $url"
+	else
+		url="$default_acs"
+		log "Using default ACS URL: $url"
+		[ -n "$url" ] && uci -c /var/state -q set cwmp.acs.url="$url"
 	fi
 
-	### Generate all ssl link for crt certicates ###
-	all_file=$(ls "${cert_dir}"/*.crt 2>/dev/null)
-	if [ -n "${all_file}" ]; then
-		for cfile in $all_file; do
-			rehash="$(openssl x509 -hash -noout -in "${cfile}")"
-			[ -f "${cert_dir}"/"${rehash}".0 ] || \
-				ln -s "${cfile}" "${cert_dir}"/"${rehash}".0
-		done
+	validate_url "$url"
+	if [ "$?" != "0" ];then
+		echo "Invalid ACS URL: $url"
+		exit 1
 	fi
 }
 
 enable_dhcp_option43() {
-	local wan="${1}"
+	local wan=$1
+	local discovery=0
+	case $2 in
+		enable|1) discovery=1 ;;
+	esac
 
 	### Ask for DHCP Option 43 only if CWMP is enabled ###
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local option43_present=0
-
+	local enabled
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
 	for ropt in $reqopts; do
 		case $ropt in
-			43) option43_present=1 ;;
-			*) ;;
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
 		esac
 	done
-
-	if [ ${option43_present} -eq 1 ]; then
-		return;
-	fi
-
-	newreqopts="$reqopts 43"
-	if [ "${proto}" = "dhcp" ]; then
-		uci -q set network."${wan}".reqopts="$newreqopts"
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ $proto == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
 		uci commit network
 		ubus call network reload
 	fi
+	########################################################
 }
 
-convert_to_hex() {
-	local val=""
-	local optval="${1}"
-	OPTIND=1
-	while getopts ":" opt "-$optval"
-	do
-		temp=$(printf "%02X" "'${OPTARG:-:}")
-		val="${val}:${temp}"
-	done
+wait_for_option43() {
+	local time=$1
+	local default_wan_interface dhcp_discovery url
 
-	echo "${val}"
-}
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	config_get dhcp_discovery acs dhcp_discovery "0"
+	config_get url acs url
 
-configure_send_op125() {
-	local sendopt="${1}"
-	local intf="${2}"
-	local uci="${3}"
-	local hex_oui=""
-	local hex_serial=""
-	local hex_class=""
-	local oui_len=0
-	local serial_len=0
-	local class_len=0
+	enable_dhcp_option43 $default_wan_interface $dhcp_discovery
 
-	if [ "${uci}" = "network" ]; then
-		local opt125="125:00:00:0D:E9"
-	else
-		local opt125="125,00:00:0D:E9"
-	fi
+	local tm=0
 
-	config_get oui cpe manufacturer_oui ""
-	if [ -z "${oui}" ]; then
-		oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-	fi
-
-	oui=$(echo "${oui}" | tr 'a-f' 'A-F')
-
-	config_get serial cpe serial_number ""
-	if [ -z "${serial}" ]; then
-		serial=$(db -q get device.deviceinfo.SerialNumber)
-	fi
-
-	config_get class cpe product_class ""
-	if [ -z "${class}" ]; then
-		class=$(db -q get device.deviceinfo.ProductClass)
-	fi
-
-	oui_len=$(echo -n "${oui}" | wc -m)
-	serial_len=$(echo -n "${serial}" | wc -m)
-	class_len=$(echo -n "${class}" | wc -m)
-
-	if [ "${oui_len}" -eq 0 ] || [ "${serial_len}" -eq 0 ]; then
-		return 0
-	fi
-
-	opt125_len=$((oui_len + serial_len + class_len))
-	if [ "${class_len}" -gt 0 ]; then
-		opt125_len=$((opt125_len + 6))
-	else
-		opt125_len=$((opt125_len + 4))
-	fi
-
-	hex_opt125_len=$(printf "%02X" "${opt125_len}")
-	opt125="${opt125}:${hex_opt125_len}"
-	hex_oui=$(convert_to_hex "${oui}")
-	if [ -z "${hex_oui}" ]; then
-		return 0
-	fi
-
-	hex_oui_len=$(printf "%02X" "${oui_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:01:${hex_oui_len}${hex_oui}"
-	else
-		opt125="${opt125}:04:${hex_oui_len}${hex_oui}"
-	fi
-
-	hex_serial=$(convert_to_hex "${serial}")
-	if [ -z "${hex_serial}" ]; then
-		return 0
-	fi
-
-	hex_serial_len=$(printf "%02X" "${serial_len}")
-	if [ "${uci}" = "network" ]; then
-		opt125="${opt125}:02:${hex_serial_len}${hex_serial}"
-	else
-		opt125="${opt125}:05:${hex_serial_len}${hex_serial}"
-	fi
-
-	if [ "${class_len}" -gt 0 ]; then
-		hex_class=$(convert_to_hex "${class}")
-		if [ -z "${hex_class}" ]; then
-			return 0
-		fi
-
-		hex_class_len=$(printf "%02X" "${class_len}")
-		if [ "${uci}" = "network" ]; then
-			opt125="${opt125}:03:${hex_class_len}${hex_class}"
-		else
-			opt125="${opt125}:06:${hex_class_len}${hex_class}"
-		fi
-	fi
-
-
-	if [ "${uci}" = "network" ]; then
-		new_send_opt="$sendopt $opt125"
-		uci -q set network."${intf}".sendopts="$new_send_opt"
-	else
-		uci -q add_list dhcp."${intf}".dhcp_option="$opt125"
-	fi
-}
-
-enable_dnsmasq_option125() {
-	local lan="${1}"
-	local send125_present=0
-	local opt125="125,"
-
-	local proto="$(uci -q get dhcp."${lan}".dhcpv4)"
-	if [ "${proto}" = "server" ]; then
-		opt_list="$(uci -q get dhcp."${lan}".dhcp_option)"
-
-		for sopt in $opt_list; do
-			if [[ "$sopt" == "$opt125"* ]]; then
-				send125_present=1
+	if [ "$dhcp_discovery" == "enable" -o "$dhcp_discovery" == "1" ]
+	then
+		log "Waiting for discovery of ACS URL from dhcp server ..."
+		while [ $tm -le $time ]
+		do
+			acs_url=`uci -c /var/state -q get cwmp.acs.dhcp_url`
+			if [ "$acs_url" != "" ]
+			then
 				break
+			else
+				sleep 1
 			fi
+			tm=$((tm+1))
 		done
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "" "${lan}" "dhcp"
-			ubus call uci commit '{"config":"dhcp"}'
-		fi
-	fi
-}
-
-set_vendor_id() {
-	local wan="${1}"
-	local proto="$(uci -q get network."${wan}".proto)"
-
-	if [ "${proto}" = "dhcp" ]; then
-		vendorid="$(uci -q get network."${wan}".vendorid)"
-		if [ -z "${vendorid}" ]; then
-			uci -q set network."${wan}".vendorid="dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		elif [[ $vendorid != *"dslforum.org"* ]]; then
-			uci -q set network."${wan}".vendorid="${vendorid},dslforum.org"
-			ubus call uci commit '{"config":"network"}'
-		fi
-	fi
-}
-
-enable_dhcp_option125() {
-	local wan="${1}"
-	local reqopts="$(uci -q get network."${wan}".reqopts)"
-	local sendopts="$(uci -q get network."${wan}".sendopts)"
-	local proto="$(uci -q get network."${wan}".proto)"
-	local newreqopts=""
-	local newsendopts=""
-	local req125_present=0
-	local send125_present=0
-	local network_uci_update=0
-	local opt125="125:"
-
-	for ropt in $reqopts; do
-		case $ropt in
-			125) req125_present=1 ;;
-			*) ;;
-		esac
-	done
-
-	for sopt in $sendopts; do
-		if [[ "$sopt" == "$opt125"* ]]; then
-			send125_present=1
-			break
-		fi
-	done
-
-	if [ "${proto}" = "dhcp" ]; then
-		if [ ${req125_present} -eq 0 ]; then
-			newreqopts="$reqopts 125"
-			uci -q set network."${wan}".reqopts="$newreqopts"
-			network_uci_update=1
-		fi
-
-		if [ ${send125_present} -eq 0 ]; then
-			configure_send_op125 "${sendopts}" "${wan}" "network"
-			network_uci_update=1
-		fi
-	fi
-
-	if [ ${network_uci_update} -eq 1 ]; then
-		uci commit network
-		ubus call network reload
 	fi
 }
 
@@ -273,233 +134,70 @@ wait_for_resolvfile() {
 	local resolvfile="$(uci -q get dhcp.@dnsmasq[0].resolvfile)"
 	[ -n "$resolvfile" ] || return
 
-	while [ ! -f "$resolvfile" ]; do
+	while [ ! -f $resolvfile ]; do
 		sleep 1
-		[ "$tm" -ge "$time" ] && break
+		[ $tm -ge $time ] && break
 		tm=$((tm+1))
 	done
 }
 
-copy_cwmp_etc_files_to_varstate() {
-	mkdir -p /var/run/icwmpd
+set_wan_interface() {
+	local l3_device=""
+	local default_wan_interface=""
 
-	if [ -f /etc/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /etc/icwmpd/icwmpd_backup_session.xml /var/run/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /etc/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /etc/icwmpd/dm_enabled_notify /var/run/icwmpd/ 2>/dev/null
+	config_get default_wan_interface cpe default_wan_interface "wan"
+	json_load "$(ifstatus $default_wan_interface)"
+	json_get_var l3_device l3_device
+	if [ "$l3_device" != "" ];then
+		uci -q set cwmp.cpe.interface="$l3_device"
+		uci -q commit cwmp
 	fi
 }
 
-copy_cwmp_varstate_files_to_etc() {
-	if [ -f /var/run/icwmpd/icwmpd_backup_session.xml ]; then
-		cp -f /var/run/icwmpd/icwmpd_backup_session.xml /etc/icwmpd/ 2>/dev/null
-	fi
-
-	if [ -f /var/run/icwmpd/dm_enabled_notify.xml ]; then
-		cp -f /var/run/icwmpd/dm_enabled_notify /etc/icwmpd/ 2>/dev/null
-	fi
-
-	# move the successful custom notify import marker to persistent storage
-	if [ -f /var/run/icwmpd/icwmpd_notify_import_marker ]; then
-		cp -f /var/run/icwmpd/icwmpd_notify_import_marker /etc/icwmpd/
-	fi
-}
-
-validate_acs_section()
-{
-	uci_validate_section cwmp acs "acs" \
-		'passwd:string' \
-		'periodic_inform_enable:bool' \
-		'periodic_inform_interval:uinteger' \
-		'periodic_inform_time:string' \
-		'url:string' \
-		'dhcp_discovery:string' \
-		'dhcp_url:string' \
-		'compression:or("GZIP","Deflate","Disabled")' \
-		'retry_min_wait_interval:range(1, 65535)' \
-		'retry_interval_multiplier:range(1000, 65535)' \
-		'ipv6_enable:bool' \
-		'ssl_capath:string'
-
-}
-
-validate_cpe_section()
-{
-	uci_validate_section cwmp cpe "cpe" \
-		'interface:string' \
-		'default_wan_interface:string' \
-		'log_to_console:or("enable","disable")' \
-		'log_to_file:or("enable","disable")' \
-		'log_severity:or("EMERG", "ALERT", "CRITIC" ,"ERROR", "WARNING", "NOTICE", "INFO", "DEBUG")' \
-		'log_file_name:string' \
-		'log_max_size:uinteger' \
-		'userid:string' \
-		'passwd:string' \
-		'port:uinteger' \
-		'provisioning_code:string:""' \
-		'amd_version:range(1, 6)' \
-		'instance_mode:or("InstanceNumber","InstanceAlias")' \
-		'session_timeout:uinteger' \
-		'notification:bool' \
-		'exec_download:bool' \
-		'periodic_notify_enable:bool' \
-		'enable:bool' \
-		'periodic_notify_interval:uinteger'
-}
-
-validate_defaults() {
-	local ssl_capath
-	config_load cwmp
-
-	validate_acs_section || {
-		log "Validation of acs section failed"
-		return 1;
-	}
-
-	ssl_capath="${ssl_capath%/}"
-	# Put the cert pem file in keep list
-	if [ -d "${ssl_capath}" ]; then
-		if ! grep "*.pem\|*.crt" /lib/upgrade/keep.d/icwmp; then
-			echo "${ssl_capath}"'/*.pem' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.crt' >> /lib/upgrade/keep.d/icwmp
-			echo "${ssl_capath}"'/*.0' >> /lib/upgrade/keep.d/icwmp
-		fi
-	fi
-
-	validate_cpe_section || {
-		log "Validation of cpe section failed"
-		return 1;
-	}
-
-	return 0;
-}
-
-boot() {
-	local enable_cwmp="0"
-	local dhcp_discovery="0"
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
-	fi
-
-	config_get dhcp_discovery acs dhcp_discovery "0"
-	config_get wan_interface cpe default_wan_interface "wan"
-
-	if [ "${dhcp_discovery}" = "enable" ] || [ "${dhcp_discovery}" = "1" ]; then
-		# Set dhcp option 43 if not already configured
-		enable_dhcp_option43 "${wan_interface}"
-		# Set dhcp option 60
-		set_vendor_id "${wan_interface}"
-	fi
-
-	config_get lan_interface cpe default_lan_interface ""
-	if [ -n "${lan_interface}" ]; then
-		# Set dhcp_option 125 if not already configured
-		enable_dhcp_option125 "${wan_interface}"
-		enable_dnsmasq_option125 "${lan_interface}"
-	fi
-	
-	config_get ssl_capath acs ssl_capath
-
-	if [ -n "${ssl_capath}" ]; then
-		regenerate_ssl_link "${ssl_capath}"
-	fi
-
-	# Copy backup data so that if it restart latter on, it gets the info
-	copy_cwmp_etc_files_to_varstate
-	mkdir -p /var/run/icwmpd/
-	touch /var/run/icwmpd/cwmp
-
-	start
+service_running() {
+	ubus wait_for usp.raw
 }
 
 start_service() {
-	local enable_cwmp
+	if [ ! -f /tmp/.icwmpd_boot ]; then
+		touch /etc/icwmpd/.icwmpd_boot
+		touch /tmp/.icwmpd_boot
+	else
+		[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
+		[ -f /etc/config/wireless ] && log "Waiting for WiFi to be started ..." && ubus -t 5 wait_for network.wireless
+		[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
+		[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
+		[ -f /usr/sbin/asterisk ] && log "Waiting for Voice to be started ..." && ubus -t 5 wait_for asterisk
 
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
+		log "Waiting for usp.raw to be started"
+		ubus wait_for usp.raw
 
-	if [ "$enable_cwmp" = "0" ]; then
-		return 0
+		config_load cwmp
+		set_wan_interface
+		wait_for_option43 20
+		get_acs_url
+
+		procd_open_instance icwmp
+		procd_set_param command "$PROG"
+		if [ "$1" = "GetRPCMethods" ];then
+			procd_append_param command -g
+		elif [ -f /etc/icwmpd/.icwmpd_boot ]; then
+			procd_append_param command -b
+		fi
+		procd_set_param respawn \
+			${respawn_threshold:-5} \
+			${respawn_timeout:-10} ${respawn_retry:-3}
+
+		procd_close_instance
 	fi
-
-	[ -f /sbin/netifd ] && log "Waiting for Network to be started ..." && ubus -t 5 wait_for network.interface
-	[ -f /usr/sbin/dnsmasq ] && log "Waiting for DNS Proxy to be started ..." && ubus -t 5 wait_for dnsmasq
-	[ -f /etc/config/dhcp ] && log "Waiting for DNS Server(s) ..." && wait_for_resolvfile 20
-
-	validate_defaults || {
-		log "Validation of defaults failed"
-		return 1;
-	}
-
-	procd_open_instance icwmp
-	procd_set_param command "$PROG"
-	procd_append_param command -b
-	procd_set_param respawn \
-		"${respawn_threshold:-5}" \
-		"${respawn_timeout:-10}" "${respawn_retry:-3}"
-
-	procd_set_param watch network.interface
-	procd_close_instance
-}
-
-stop_service()
-{
-	copy_cwmp_varstate_files_to_etc
 }
 
 reload_service() {
-	local ret
-
-	config_load cwmp
-	config_get_bool enable_cwmp cpe enable 1
-
-	ret="0"
-	if [ "$enable_cwmp" = "0" ]; then
-		stop
-		start
-		return 0
-	fi
-
-	tr069_status="$(ubus -t 1 call tr069 status)"
-	ret="$?"
-	if [ "$ret" = "7" ]; then
-		# ubus timed out may be due to uloop is busy in some task so returning
-		return 0
-	fi
-
-	status="$(echo "${tr069_status}" | jsonfilter -qe '@.cwmp.status')"
-	ret="$?"
-	if [ "$status" = "up" ]; then
-		ubus -t 1 call tr069 command '{"command":"reload"}'
-		ret="$?"
-	fi
-
-	if [ "$status" = "init" ] || [ "$ret" -ne "0" ]; then
-		log "Restarting CWMP client"
-		stop
-		start
-	fi
+	stop
+	start
 }
 
 service_triggers() {
-       procd_add_reload_trigger "cwmp"
-
-       procd_open_trigger
-               json_add_array
-                       json_add_string "" "interface.update"
-                       json_add_array
-                               json_add_array
-                                       json_add_string "" "run_script"
-                                       json_add_string "" "/etc/icwmpd/update.sh"
-                               json_close_array
-                       json_close_array
-                       json_add_int "" "2000"
-               json_close_array
-       procd_close_trigger
+	procd_add_config_trigger "config.change" "cwmp"  /etc/init.d/icwmpd reload
 }
 

icwmp/files/etc/uci-defaults/85-cwmp-set-userid

@@ -1,41 +1,32 @@
-#!/bin/sh
-
-. /lib/functions.sh
 # Copy defaults by the factory to the cwmp UCI user section.
-config_load cwmp
 
-# Get Manufacturer OUI.
-config_get oui cpe manufacturer_oui ""
-if [ -z "${oui}" ]; then
-	oui=$(db -q get device.deviceinfo.ManufacturerOUI)
-fi
 
-oui=$(echo "${oui}" | tr 'a-f' 'A-F')
+# Get factory base MAC.
+baseMac=$(db -q get hw.board.basemac)
+
+# Erase colon and space characters.
+baseMac=${baseMac//:/}
+baseMac=${baseMac// /}
+
+# Caseing and fixed length string.
+mac=$(printf "%12.12X" $((0x$baseMac)))
 
 # Get system serial number.
-config_get serial cpe serial_number ""
-if [ -z "${serial}" ]; then
-	serial=$(db -q get device.deviceinfo.SerialNumber)
-fi
+serial=$(db -q get hw.board.serial_number)
 
 # Get userid values
-config_get acs_userid acs userid ""
-config_get cpe_userid cpe userid ""
+acs_userid=$(uci -q get cwmp.acs.userid)
+cpe_userid=$(uci -q get cwmp.cpe.userid)
 
 # Only set if they are empty
-if [ -z "${acs_userid}" ]; then
-    uci -q set cwmp.acs.userid="${oui}-${serial}"
+if [ -z "$acs_userid" ]
+then
+    uci -q set cwmp.acs.userid="${mac:0:6}-${serial}"
 fi
 
-if [ -z "${cpe_userid}" ]; then
-    uci -q set cwmp.cpe.userid="${oui}-${serial}"
-fi
-
-# Fix the cwmp.cpe.enable parameter
-# set default to 1 if not defined
-config_get enable_cwmp cpe enable ""
-if [ -z "${enable_cwmp}" ]; then
-    uci -q set cwmp.cpe.enable="1"
+if [ -z "$cpe_userid" ]
+then
+    uci -q set cwmp.cpe.userid="${mac:0:6}-${serial}"
 fi
 
 # No need for commit here, it is done by uci_apply_defaults().

icwmp/files/etc/uci-defaults/90-icwmp-set-dhcp-reqopts

@@ -0,0 +1,54 @@
+#!/bin/sh
+
+. /lib/functions.sh
+
+set_cwmp_reqopts() {
+	### Ask for DHCP Option 43 only if CWMP is enabled ###
+	local wan=$(uci -q get cwmp.cpe.default_wan_interface)
+	local dhcp_discovery=$(uci -q get cwmp.acs.dhcp_discovery)
+	local discovery=0
+	case $dhcp_discovery in
+		enable|1) discovery=1 ;;
+	esac
+
+	local newreqopts=
+	local baseopts=
+	local reqopts="$(uci -q get network.$wan.reqopts)"
+	local proto="$(uci -q get network.$wan.proto)"
+	local tropts="43"
+	local oldreqopts="$reqopts"
+	local ropt iopt
+	for ropt in $reqopts; do
+		case $ropt in
+			43) ;;
+			*) baseopts="$baseopts $ropt" ;;
+		esac
+	done
+	ropt=""
+	reqopts="$baseopts $tropts"
+	for ropt in $reqopts; do
+		case $ropt in
+			43) [ $discovery -eq 1 ] && newreqopts="$newreqopts $ropt" ;;
+			*) newreqopts="$newreqopts $ropt" ;;
+		esac
+	done
+	if [ "$proto" == "dhcp" ]; then
+		newreqopts="$(echo $newreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		oldreqopts="$(echo $oldreqopts | tr ' ' '\n' | sort -n | tr '\n' ' ' | sed 's/^[ \t]*//;s/[ \t]*$//')"
+		[ "$newreqopts" == "$oldreqopts" ] && return
+		uci -q set network.$wan.reqopts="$newreqopts"
+		uci commit network
+	fi
+}
+
+regenerate_ssl_link(){
+	local cert_dir="/etc/ssl/certs"
+	local all_file=$(ls $cert_dir/*.pem)
+	for cfile in $all_file
+	do
+		ln -s $cfile $cert_dir/$(openssl x509 -hash -noout -in $cfile).0
+	done
+}
+
+set_cwmp_reqopts
+regenerate_ssl_link

icwmp/files/lib/upgrade/keep.d/icwmp

@@ -1,2 +1 @@
-/var/run/icwmpd/icwmpd_backup_session.xml
-/etc/icwmpd/cwmp
+/etc/icwmpd/.icwmpd_backup_session.xml

ieee1905/Config.in

@@ -1,27 +1,10 @@
 if (PACKAGE_ieee1905)
 
-menu "Configuration"
+menu "Configurations"
 
 config IEEE1905_EXTENSION_ALLOWED
 	bool "Allow plugins to extend 1905 CMDUs and/or TLVs"
 	default y
 
-config IEEE1905_PLATFORM_HAS_WIFI
-	bool "Platform has WiFi"
-	default y if PACKAGE_libwifi
-
-config IEEE1905_CMDU_SA_IS_ALMAC
-	bool "Send CMDUs with SA set to 1905 AL-macaddress instead of interface macaddress"
-	default n
-
-config IEEE1905_WIFI_EASYMESH
-	bool "Include WiFi-Alliance's Easymesh updates"
-	default y
-
-config IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-	bool "Fragment large CMDU frame at TLV boundary instead of octet boundary"
-	default y
-
 endmenu
-
 endif

ieee1905/Makefile

@@ -5,12 +5,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=ieee1905
-PKG_VERSION:=8.0.12
+PKG_VERSION:=4.0.1
 
 LOCAL_DEV=0
 ifneq ($(LOCAL_DEV),1)
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=b265053762a3d6c901872f29fa3e70b8666daf46
+PKG_SOURCE_VERSION:=c4e6275434c65d64a90edbefa225f582f2ce356e
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ieee1905.git
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
 PKG_MIRROR_HASH:=skip
@@ -35,21 +35,27 @@ define Package/ieee1905/config
 endef
 
 define Package/libieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=libieee1905.so (library for CMDU and TLV handling)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= (library for CMDU and TLV handling)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
 	   +libjson-c +libblobmsg-json
 endef
 
 define Package/ieee1905
-  $(call Package/ieee1905/Default)
-  TITLE:=ieee1905d (daemon implementing 1905.1 and provides cli)
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ubus +libpthread \
-	   +libieee1905 +IEEE1905_PLATFORM_HAS_WIFI:libwifi
+$(call Package/ieee1905/Default,$(1))
+  TITLE+= ieee1905d (daemon implementing 1905.1 and provides cli)
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
+	   +libjson-c +libblobmsg-json +libwifi +ubus +libpthread \
+	   +libnl-genl +libieee1905
 endef
 
-include $(wildcard plugins/*.mk)
+
+define Package/map-plugin
+$(call Package/ieee1905/Default,$(1))
+  TITLE:=Multi-AP (Easymesh) plugin
+  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl +libwifi \
+	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
+endef
 
 define Package/ieee1905/description
  This package provides IEEE Std 1905.1 stack.
@@ -59,39 +65,11 @@ define Package/libieee1905/description
  This package provides library functions for IEEE Std 1905.1 stack.
 endef
 
-plugins := \
-	$(if $(CONFIG_PACKAGE_map-plugin),map) \
-	$(if $(CONFIG_PACKAGE_snoop-plugin),snoop) \
-	$(if $(CONFIG_PACKAGE_topology-plugin),topology)
-
-
-ppkg:=$(patsubst plugins/%.mk,%-plugin,$(wildcard plugins/*.mk))
-
-
 TARGET_CFLAGS += \
 	-I$(STAGING_DIR)/usr/include \
 	-I$(STAGING_DIR)/usr/include/libnl3 \
 	-D_GNU_SOURCE
 
-ifeq ($(CONFIG_IEEE1905_PLATFORM_HAS_WIFI),y)
-TARGET_CFLAGS += -DHAS_WIFI
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_SA_IS_ALMAC),y)
-TARGET_CFLAGS += -DCMDU_SA_IS_ALMAC
-endif
-
-ifeq ($(CONFIG_IEEE1905_WIFI_EASYMESH),y)
-TARGET_CFLAGS += -DWIFI_EASYMESH
-endif
-
-ifeq ($(CONFIG_IEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY),y)
-TARGET_CFLAGS += -DIEEE1905_CMDU_FRAGMENT_TLV_BOUNDARY
-endif
-
-MAKE_FLAGS += \
-	extmod_subdirs="$(patsubst %,extensions/%,$(plugins))"
-
 MAKE_PATH:=src
 
 
@@ -109,32 +87,43 @@ define Package/libieee1905/install
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 endef
 
+define Package/map-plugin/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+endef
+
+define Build/InstallDev/map-plugin
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map2.h $(1)/usr/include/map2.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
+	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
+endef
+
+
 define Build/InstallDev/libieee1905
 	$(INSTALL_DIR) $(1)/usr/lib
 	$(INSTALL_DIR) $(1)/usr/include
 	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
 	$(CP) $(PKG_BUILD_DIR)/src/cmdu.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/cmdu_ackq.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/1905_tlvs.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/i1905_wsc.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/bufutil.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/timer_impl.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/src/i1905_extension.h $(1)/usr/include/
 	$(CP) $(PKG_BUILD_DIR)/src/libmidgen.so $(1)/usr/lib/
 	$(CP) $(PKG_BUILD_DIR)/src/libieee1905.so $(1)/usr/lib/
 endef
 
 define Build/InstallDev
 	$(call Build/InstallDev/libieee1905,$(1),$(2))
-	$(foreach p,$(ppkg),$(call Build/InstallDev/$(p),$(1),$(2)))
+	$(call Build/InstallDev/map-plugin,$(1),$(2))
 endef
 
-ifeq ($(LOCAL_DEV),1)
-define Build/Prepare
-        rsync -r --exclude=.* ~/git/ieee1905/ $(PKG_BUILD_DIR)/
-endef
-endif
 
 $(eval $(call BuildPackage,ieee1905))
 $(eval $(call BuildPackage,libieee1905))
-$(eval $(foreach p,$(ppkg),$(call BuildPackage,$(p))))
+$(eval $(call BuildPackage,map-plugin))

ieee1905/files/etc/config/ieee1905

@@ -2,31 +2,21 @@ config ieee1905 'ieee1905'
 	option enabled '1'
 	option extension '1'
 	list extmodule 'map'
-	option registrar '2 5 6'
-#	option macaddress '0a:1b:2c:3d:4e:50'
+	option registrar '2 5'
 
-config al-iface
-	option enabled '1'
-	option ifname 'br-lan'
-	option type 'bridge'
-
-# ap sections are auto-generated/overwritten during onboarding
-#
 config ap
 	option band '2'
-	option ssid 'IOWRT-2.4GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.2'
+	option encryption 'psk2'
+	option key '5555500000'
 
 config ap
 	option band '5'
-	option ssid 'IOWRT-5GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
-
-config ap
-	option band '6'
-	option ssid 'IOWRT-6GHz'
-	option encryption 'sae-mixed'
-	option key '1234567890'
+	option ssid 'TestSSID.5'
+	option encryption 'psk2'
+	option key '2222200000'
 
+config al-iface
+	option enabled 1
+	option ifname 'br-lan'
+	option type 'bridge'

ieee1905/files/etc/init.d/ieee1905

@@ -5,88 +5,10 @@ STOP=21
 
 USE_PROCD=1
 
-IS_CFG_VALID=1
-
-validate_ieee1905_section() {
-	uci_validate_section ieee1905 ieee1905 "ieee1905" \
-			'enabled:bool:true' \
-			'macaddress:or("auto",macaddr)' \
-			'registrar:string' \
-			'extension:bool:false' \
-			'extmodule:list(string)' \
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ali_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'ifname:string' \
-			'type:or("bridge",string)'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of al-iface section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ap_section() {
-	local section="$1"
-
-	uci_validate_section ieee1905 $section "${1}" \
-			'band:or("2", "5", "60", "6")' \
-			'ssid:string' \
-			'encryption:or("psk2", "sae-mixed", "sae",
-				"psk", "psk-mixed", "none", string)' \
-			'key:string' \
-			'uuid:string' \
-			'manufacturer:string' \
-			'model_name:string' \
-			'device_name:string' \
-			'model_number:string' \
-			'serial_number:string' \
-			'device_type:string' \
-			'os_version:uinteger'
-
-	[ "$?" -ne 0 ] && {
-		logger -s -t "ieee1905" "Validation of ap section $section failed"
-		IS_CFG_VALID=0
-		return 1
-	}
-	return 0
-}
-
-validate_ieee1905_config() {
-	IS_CFG_VALID=1
-
-	validate_ieee1905_section &&
-		config_foreach validate_ali_section "al-iface" &&
-		config_foreach validate_ap_section ap
-
-	[ "$IS_CFG_VALID" -ne 1 ] && {
-		logger -s -t "ieee1905" "Validation of ieee1905 UCI file failed"
-		return 1
-	}
-	return 0
-}
-
 start_service() {
-	config_load "ieee1905"
-	validate_ieee1905_config || return 1;
-
 	procd_open_instance
-        procd_set_param command "/usr/sbin/ieee1905d" "-o"  "/tmp/ieee1905.log" "-f"
+        procd_set_param command "/usr/sbin/ieee1905d"
 	procd_set_param respawn
-	procd_set_param limits core="unlimited"
-#	procd_set_param env IEEE1905_LOG_CMDU=1
 #	procd_set_param stdout 1
 #	procd_set_param stderr 1
 	procd_close_instance

ieee1905/files/etc/uci-defaults/30-set-ieee1905-al-macaddr

@@ -1,22 +0,0 @@
-#!/bin/sh
-
-
-BMAC=$(db -q get hw.board.basemac)
-BMAC=${BMAC//:/}
-BMAC=${BMAC// /}
-BMAC=$(printf "%12.12X" $((0x$BMAC)))
-
-[ "$BMAC" == "" ] && exit 1
-
-LMAC=$((0x$BMAC & 0xfeffffffffff))
-LMAC=$(($LMAC | 0x020000000000))
-LMAC=$(printf "%12.12X" $LMAC)
-LMAC=$(echo $LMAC | sed -e 's/[0-9A-F]\{2\}/&:/g' -e 's/:$//')
-
-mac=$(uci -q get ieee1905.ieee1905.macaddress)
-
-[ "$mac" != "" ] && exit 0
-
-uci set ieee1905.ieee1905.macaddress="$LMAC"
-uci commit ieee1905
-

ieee1905/files/etc/uci-defaults/31-ifname-option-to-list

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-config_load ieee1905
-
-ifname_to_list() {
-	local section=$1
-
-	config_get ifname $section ifname	# get list or option as space separated values
-	ifname=${ifname//,/\ }			# convert csv with space separation
-	uci del ieee1905.${section}.ifname	# delete entry
-	for i in ${ifname}; do
-		uci add_list ieee1905.${section}.ifname="$i"	# writeback entry as list
-	done
-}
-
-config_foreach ifname_to_list al-iface

ieee1905/plugins/map.mk

@@ -1,51 +0,0 @@
-define Package/map-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Multi-AP plugin supporting WiFi-Alliance Easymesh standard
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/map-plugin/config
-	if (PACKAGE_map-plugin)
-
-		menu "Configuration"
-
-		config MULTIAP_EASYMESH_VERSION
-		int "Easymesh version"
-		default 2
-
-		config MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG
-		bool "Sync configuration between dynamic controllers in the network"
-		default n
-
-		config MULTIAP_FUZZ_1905_CMDUS
-		bool "Include support to fuzz 1905 CMDUs for testing purpose"
-		default n
-
-		endmenu
-	endif
-endef
-
-TARGET_CFLAGS += -DEASYMESH_VERSION=$(CONFIG_MULTIAP_EASYMESH_VERSION)
-
-ifeq ($(CONFIG_MULTIAP_DYNAMIC_CNTLR_SYNC_CONFIG),y)
-TARGET_CFLAGS += -DDYNAMIC_CNTLR_SYNC_CONFIG
-endif
-
-define Build/InstallDev/map-plugin
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/easymesh.h $(1)/usr/include/easymesh.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map_module.h $(1)/usr/include/map_module.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/cntlrsync.h $(1)/usr/include/cntlrsync.h
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-endef
-
-define Package/map-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/libmaputil.so $(1)/usr/lib/libmaputil.so
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/map/map.so $(1)/usr/lib/ieee1905/map.so
-endef

ieee1905/plugins/snoop.mk

@@ -1,12 +0,0 @@
-define Package/snoop-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Show all received 1905 CMDUs over UBUS
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/snoop-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/snoop/snoop.so $(1)/usr/lib/ieee1905/snoop.so
-endef

ieee1905/plugins/topology.mk

@@ -1,12 +0,0 @@
-define Package/topology-plugin
-  $(call Package/ieee1905/Default)
-  TITLE:=Build full network topology of the 1905 nodes only
-  DEPENDS= +libubox +libuci +libubus +libeasy +libnl-genl \
-	   +libjson-c +libblobmsg-json +ieee1905 +libieee1905
-endef
-
-define Package/topology-plugin/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/ieee1905
-	$(CP) $(PKG_BUILD_DIR)/src/extensions/topology/topology.so $(1)/usr/lib/ieee1905/topology.so
-endef

inbd/Makefile

@@ -9,10 +9,10 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=inbd
-PKG_VERSION:=1.2.3
+PKG_VERSION:=1.2.2
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=d4e910a31039e0c0b7a539311eafcd716c36be77
+PKG_SOURCE_VERSION:=10f765f3d0fcc226b6ecf0c481598c9e7f76315e
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz

iop/Config.in

@@ -1,7 +0,0 @@
-config TARGET_VERSION
-	string
-	prompt "Software Version"
-
-config TARGET_CUSTOMER
-	string
-	prompt "Customer ID"

iop/Makefile

@@ -24,10 +24,6 @@ define Package/iop/description
 	This package contains iopsysWrt SDK utilities
 endef
 
-define Package/iop/config
-	source "$(SOURCE)/Config.in"
-endef
-
 define Build/Compile
 	true
 endef

iop/config

@@ -1,225 +1,107 @@
-############
-# Generic #
-##########
-
-# Build #
-CONFIG_BUILD_LOG=y
+CONFIG_BUILD_NLS=y
+CONFIG_BUSYBOX_CUSTOM=y
 CONFIG_CCACHE=y
 CONFIG_DEBUG=y
 CONFIG_DEVEL=y
-# CONFIG_USE_SSTRIP is not set
-CONFIG_USE_STRIP=y
-# CONFIG_SIGNED_PACKAGES is not set
-
-# Image #
-CONFIG_TARGET_CUSTOMER="IOPSYS"
-CONFIG_TARGET_ROOTFS_TARGZ=y
-
-# /etc/banner and /etc/device_info #
-CONFIG_IMAGEOPT=y
-CONFIG_VERSIONOPT=y
-CONFIG_VERSION_MANUFACTURER="IOPSYS"
-CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
-CONFIG_VERSION_DIST="IOWRT"
-
-# OpenWrt is given by CONFIG_VERSION_NUMBER which we do not want to override.
-# disabling CONFIG_VERSION_FILENAMES will hide the OpenWrt version from the image filename
-# CONFIG_VERSION_FILENAMES is not set
-
-# CONFIG_VERSION_CODE is set to the IOWRT version instead by the genconfig-script and
-# CONFIG_VERSION_CODE_FILENAMES will put it into the image filename.
-CONFIG_VERSION_CODE_FILENAMES=y
-
-CONFIG_VERSION_HOME_URL="https://iopsys.eu"
-CONFIG_VERSION_BUG_URL="https://iopsys.eu"
-CONFIG_VERSION_SUPPORT_URL="https://iopsys.eu"
-
-# /lib/preinit #
-CONFIG_PREINITOPT=y
-# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
-CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
-CONFIG_TARGET_PREINIT_TIMEOUT=1
-# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
-# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
-CONFIG_TARGET_PREINIT_IFNAME=""
-CONFIG_TARGET_PREINIT_IP=""
-CONFIG_TARGET_PREINIT_NETMASK=""
-CONFIG_TARGET_PREINIT_BROADCAST=""
-
-# Mirror #
-CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
-
-
-##################
-# IOWRT Add-ons #
-################
-
-# EasySoC HAL #
-CONFIG_PACKAGE_inbd=y
-CONFIG_PACKAGE_qosmngr=y
-CONFIG_PACKAGE_libwifiutils=y
-CONFIG_PACKAGE_wifimngr=y
-
-# Multi-AP #
-CONFIG_PACKAGE_ieee1905=y
-CONFIG_PACKAGE_map-agent=m
-CONFIG_PACKAGE_map-controller=m
-CONFIG_PACKAGE_map-topology=y
-CONFIG_PACKAGE_wfadatad-collector=y
-
-# Network #
-CONFIG_PACKAGE_netmode=y
-CONFIG_PACKAGE_owsd=m
-CONFIG_PACKAGE_urlfilter=y
-
-# System #
-CONFIG_PACKAGE_imonitor=m
-CONFIG_PACKAGE_questd=y
-CONFIG_PACKAGE_rulengd=y
-CONFIG_PACKAGE_usermngr=y
-
-# TR-x69 #
-CONFIG_PACKAGE_uspd-mbedtls=y
-CONFIG_PACKAGE_icwmp-mbedtls=y
-CONFIG_PACKAGE_obuspa=y
-CONFIG_PACKAGE_bulkdata=y
-CONFIG_PACKAGE_periodicstats=y
-CONFIG_PACKAGE_stunc-mbedtls=m
-CONFIG_PACKAGE_swmodd=m
-CONFIG_PACKAGE_twamp=m
-CONFIG_PACKAGE_udpecho-client=m
-CONFIG_PACKAGE_udpecho-server=m
-CONFIG_PACKAGE_xmppc=m
-
-# WebGUI #
-CONFIG_PACKAGE_sulu=y
-
-
-############
-# Network #
-##########
-
-# Protocols #
 CONFIG_PACKAGE_6in4=y
 CONFIG_PACKAGE_6rd=y
 CONFIG_PACKAGE_6to4=y
+CONFIG_PACKAGE_at=y
+CONFIG_PACKAGE_atftp=m
+CONFIG_PACKAGE_atftpd=m
+CONFIG_PACKAGE_bulkdata=y
 CONFIG_PACKAGE_chat=y
 CONFIG_PACKAGE_comgt=y
 CONFIG_PACKAGE_comgt-directip=y
 CONFIG_PACKAGE_comgt-ncm=y
+CONFIG_PACKAGE_ddns-scripts=y
 CONFIG_PACKAGE_ds-lite=y
+CONFIG_PACKAGE_ethtool=y
+CONFIG_PACKAGE_getopt=y
+CONFIG_PACKAGE_glib2=y
 CONFIG_PACKAGE_gre=y
+CONFIG_PACKAGE_icwmp=y
+CONFIG_PACKAGE_ieee1905=y
+CONFIG_PACKAGE_map-topology=y
+CONFIG_PACKAGE_mosquitto-client-ssl=y
+CONFIG_PACKAGE_mosquitto-ssl=y
+CONFIG_PACKAGE_wfadatad=y
+CONFIG_PACKAGE_imonitor=m
+CONFIG_PACKAGE_inbd=y
+CONFIG_PACKAGE_ip-full=y
+CONFIG_PACKAGE_iperf3=y
+CONFIG_PACKAGE_ipset=y
+CONFIG_PACKAGE_iptables=y
+CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
+CONFIG_PACKAGE_iptables-mod-filter=y
+CONFIG_PACKAGE_iptables-mod-ipopt=y
+# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_jq=y
+CONFIG_PACKAGE_libreswan=m
+CONFIG_PACKAGE_libwifi=y
+CONFIG_PACKAGE_lscpu=y
+CONFIG_PACKAGE_luci-nginx=y
+# CONFIG_LUCI_JSMIN is not set
+# CONFIG_LUCI_CSSTIDY is not set
+CONFIG_PACKAGE_luci-mod-dashboard=y
+CONFIG_PACKAGE_luci-theme-openwrt-2020=y
 CONFIG_PACKAGE_map=y
+CONFIG_PACKAGE_miniupnpd=y
+CONFIG_PACKAGE_mwan3=y
+CONFIG_PACKAGE_nand-utils=y
+CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_netmode=y
 CONFIG_PACKAGE_ntfs-3g=y
 CONFIG_PACKAGE_ntpd=y
+CONFIG_PACKAGE_obuspa=y
 CONFIG_PACKAGE_odhcp6c=y
 CONFIG_PACKAGE_odhcpd=y
+CONFIG_PACKAGE_openssl-util=y
+CONFIG_OPENSSL_WITH_COMPRESSION=y
+CONFIG_PACKAGE_openvpn-easy-rsa=y
+CONFIG_PACKAGE_openvpn-openssl=y
+CONFIG_PACKAGE_owsd=y
+CONFIG_PACKAGE_periodicstats=y
+CONFIG_PACKAGE_peripheral_manager=y
+CONFIG_PACKAGE_port-management=y
 CONFIG_PACKAGE_ppp-mod-pppoa=y
 CONFIG_PACKAGE_ppp-mod-pppoe=y
 CONFIG_PACKAGE_ppp-mod-pppol2tp=y
 CONFIG_PACKAGE_ppp-mod-pptp=y
 CONFIG_PACKAGE_ppp-multilink=y
 # CONFIG_PACKAGE_ppp is not set
-CONFIG_PACKAGE_relayd=y
-CONFIG_PACKAGE_umbim=y
-CONFIG_PACKAGE_uqmi=y
-CONFIG_PACKAGE_wwan=y
-CONFIG_PACKAGE_xl2tpd=y
-
-# Services #
-CONFIG_PACKAGE_atftp=m
-CONFIG_PACKAGE_atftpd=m
-CONFIG_PACKAGE_ddns-scripts=y
-CONFIG_PACKAGE_dnsmasq=y
-CONFIG_PACKAGE_ssdpd=y
-CONFIG_PACKAGE_mosquitto-client-ssl=y
-CONFIG_PACKAGE_mosquitto-ssl=y
-CONFIG_PACKAGE_nginx=y
-CONFIG_PACKAGE_openvpn-easy-rsa=y
-CONFIG_PACKAGE_openvpn-openssl=y
-CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
 # CONFIG_PACKAGE_qos-scripts is not set
-CONFIG_PACKAGE_rdnssd=y
-CONFIG_PACKAGE_vsftpd-tls=m
-
-# Tools and Utilities #
-CONFIG_PACKAGE_curl=y
-CONFIG_PACKAGE_libcurl=y
-CONFIG_LIBCURL_CRYPTO_AUTH=y
-# CONFIG_LIBCURL_MBEDTLS is not set
-CONFIG_LIBCURL_OPENSSL=y
-CONFIG_PACKAGE_ethtool=y
-CONFIG_PACKAGE_ip-bridge=y
-CONFIG_PACKAGE_ip-full=y
-CONFIG_PACKAGE_iperf3=y
-CONFIG_PACKAGE_ipset=y
-CONFIG_PACKAGE_ip6tables-zz-legacy=y
-CONFIG_PACKAGE_iptables-zz-legacy=y
-CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
-CONFIG_PACKAGE_iptables-mod-filter=y
-CONFIG_PACKAGE_iptables-mod-ipopt=y
-CONFIG_PACKAGE_ndisc6=y
+CONFIG_PACKAGE_questd=y
 CONFIG_PACKAGE_rdisc6=y
+CONFIG_PACKAGE_rdnssd=y
+CONFIG_PACKAGE_relayd=y
 CONFIG_PACKAGE_resolveip=y
-CONFIG_PACKAGE_tcpdump=y
-CONFIG_PACKAGE_traceroute6=y
-
-
-############
-# System  #
-##########
-
-CONFIG_PACKAGE_at=y
-CONFIG_PACKAGE_getopt=y
-# CONFIG_PACKAGE_iwatchdog is not set
-CONFIG_PACKAGE_jq=y
-CONFIG_PACKAGE_libustream-openssl=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set
-CONFIG_PACKAGE_lscpu=y
-CONFIG_PACKAGE_nand-utils=y
-CONFIG_PACKAGE_openssl-util=y
-CONFIG_OPENSSL_WITH_COMPRESSION=y
-CONFIG_PACKAGE_procd-ujail=m
 CONFIG_PACKAGE_rpcd=y
 CONFIG_PACKAGE_rpcd-mod-rpcsys=y
-CONFIG_PACKAGE_rpcd-mod-rrdns=y
+CONFIG_PACKAGE_rulengd=y
 CONFIG_PACKAGE_strace=y
+CONFIG_PACKAGE_sulu=y
+CONFIG_PACKAGE_swmodd=m
+CONFIG_PACKAGE_tcpdump=y
 CONFIG_PACKAGE_terminfo=y
+CONFIG_PACKAGE_traceroute6=y
 CONFIG_PACKAGE_uledd=y
-# The urandom-seed package is very strange. It seeds urandom with urandom...
-# Disable it. Most SoCs nowadays has HW random generators anyway.
-# CONFIG_PACKAGE_urandom-seed is not set
-# CONFIG_PACKAGE_urngd is not set
+CONFIG_PACKAGE_umbim=y
+CONFIG_PACKAGE_uqmi=y
+CONFIG_PACKAGE_urlfilter=y
 CONFIG_PACKAGE_usb-modeswitch=y
+CONFIG_PACKAGE_uspd=y
+CONFIG_PACKAGE_vsftpd-tls=m
+CONFIG_PACKAGE_wwan=y
+CONFIG_PACKAGE_wifimngr=y
 CONFIG_PACKAGE_uuidgen=y
+CONFIG_PACKAGE_xl2tpd=y
 CONFIG_PACKAGE_zoneinfo-core=y
 CONFIG_PACKAGE_zoneinfo-europe=y
-
-
-################
-# LuCI WebGUI #
-##############
-
-# BEGIN: luci-nginx metapackage with some changes
-# We do not want libiwinfo-lua on non-WiFi targets, but it is already
-# depended on by other luci-packages, so no need to take it in explicitly
-CONFIG_PACKAGE_luci-mod-admin-full=y
-CONFIG_PACKAGE_luci-app-firewall=y
-CONFIG_PACKAGE_luci-app-opkg=y
-CONFIG_PACKAGE_luci-proto-ppp=y
-CONFIG_PACKAGE_luci-proto-ipv6=y
-# CONFIG_LUCI_JSMIN is not set
-# CONFIG_LUCI_CSSTIDY is not set
-CONFIG_PACKAGE_luci-mod-dashboard=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-CONFIG_PACKAGE_nginx-mod-luci=y
-
-
-############
-# BusyBox #
-##########
-
-CONFIG_BUSYBOX_CUSTOM=y
+CONFIG_TARGET_CUSTOMER="IOPSYS"
+# CONFIG_USE_SSTRIP is not set
+CONFIG_USE_STRIP=y
+CONFIG_BUILD_LOG=y
 CONFIG_BUSYBOX_CONFIG_ADDUSER=y
 CONFIG_BUSYBOX_CONFIG_ARPING=y
 CONFIG_BUSYBOX_CONFIG_ASH_IDLE_TIMEOUT=y
@@ -239,7 +121,6 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_ALIAS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_MODUTILS_SYMBOLS=y
 CONFIG_BUSYBOX_CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
 CONFIG_BUSYBOX_CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
-# CONFIG_BUSYBOX_CONFIG_IP is not set
 CONFIG_BUSYBOX_CONFIG_LAST_SYSTEM_ID=999
 CONFIG_BUSYBOX_CONFIG_LOGIN=y
 # CONFIG_BUSYBOX_CONFIG_LSMOD is not set
@@ -303,10 +184,42 @@ CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_SQUASHFS=y
 CONFIG_BUSYBOX_CONFIG_FEATURE_VOLUMEID_UBIFS=y
 CONFIG_BUSYBOX_CONFIG_TIMEOUT=y
 CONFIG_BUSYBOX_CONFIG_NOHUP=y
+CONFIG_LIBCURL_CRYPTO_AUTH=y
+# CONFIG_LIBCURL_MBEDTLS is not set
+CONFIG_LIBCURL_OPENSSL=y
+CONFIG_OPENVPN_openssl_ENABLE_IPROUTE2=y
+# CONFIG_SIGNED_PACKAGES is not set
+CONFIG_KERNEL_DEVTMPFS=y
+CONFIG_KERNEL_DEVTMPFS_MOUNT=y
+# CONFIG_BUSYBOX_CONFIG_IP is not set
+CONFIG_LOCALMIRROR="https://download.iopsys.eu/iopsys/mirror/"
 
-# Use fw3 iptables-based instead of newer nftables-based fw4
-# TODO: for now we cannot build an image with fw3 and luci-app-firewall (i.e. fw3)
-# Enabling luci-app-firewall enables fw4
-# CONFIG_PACKAGE_luci-app-firewall is not set
-CONFIG_PACKAGE_firewall=y
-# CONFIG_PACKAGE_firewall4 is not set
+# Generation of /etc/banner.
+CONFIG_IMAGEOPT=y
+CONFIG_VERSIONOPT=y
+CONFIG_VERSION_MANUFACTURER="iopsysWrt"
+CONFIG_VERSION_MANUFACTURER_URL="https://iopsys.eu/"
+
+# Disable as much as possible of OpenWrt messy "pre-init" stuff.
+CONFIG_PREINITOPT=y
+# CONFIG_TARGET_PREINIT_SUPPRESS_STDERR is not set
+CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE=y
+CONFIG_TARGET_PREINIT_TIMEOUT=1
+# CONFIG_TARGET_PREINIT_SHOW_NETMSG is not set
+# CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG is not set
+CONFIG_TARGET_PREINIT_IFNAME=""
+CONFIG_TARGET_PREINIT_IP=""
+CONFIG_TARGET_PREINIT_NETMASK=""
+CONFIG_TARGET_PREINIT_BROADCAST=""
+
+# Generate rootfs tar file
+CONFIG_TARGET_ROOTFS_TARGZ=y
+
+# The urandom-seed package is very strange. It seeds urandom with urandom...
+# Disable it. Most SoCs nowadays has HW random generators anyway.
+# CONFIG_PACKAGE_urandom-seed is not set
+# CONFIG_PACKAGE_urngd is not set
+
+# We use OpenSSL, no need to ship multiple TLS libraries
+CONFIG_PACKAGE_libustream-openssl=y
+# CONFIG_PACKAGE_libustream-wolfssl is not set

iop/scripts/feeds_update.sh

@@ -2,65 +2,58 @@
 
 function feeds_update {
 
-	developer=0
-	override=1
-	start=$(date -u +'%s')
-	while getopts "n" opt; do
-		case $opt in
-		n)
-			override=0
-			;;
-		esac
-	done
+    developer=0
+    override=1
+    start=$(date -u +'%s');
+    while getopts "n" opt; do
+	case $opt in
+	    n)
+		override=0
+		;;
+	esac
+    done
 
-	git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	cp .config .genconfig_config_bak
+    git remote -v | grep -qE '(git@|ssh://)' && developer=1
 
-	#if -d argument is passed, clone feeds with ssh instead of http
-	if [ $developer == 1 ]; then
-		./scripts/feeds update -g
-	else
-		./scripts/feeds update
-	fi
+    cp .config .genconfig_config_bak
+
+    #if -d argument is passed, clone feeds with ssh instead of http
+    if [ $developer == 1 ]; then
+	./scripts/feeds update -g
+    else
+	./scripts/feeds update
+    fi
 	./scripts/feeds update -ai
 
-	# replace core packages with iopsys versions
-	if [ $override == 1 ]; then
+    # replace core packages with iopsys versions
+    if [ $override == 1 ]; then
 		./scripts/feeds install -f -p openwrt_core -a
-	fi
+    fi
 
-	# targets need to be installed explicitly
-	for target in $(ls ./feeds/targets); do
-		rm -f target/linux/$target
-		./scripts/feeds install -p targets $target
-	done
+    # targets need to be installed explicitly
+    targets="iopsys-brcm63xx-arm iopsys-ramips intel_mips iopsys-x86 iopsys-armvirt iopsys-bcm27xx iopsys-mediatek iopsys-econet"
+    for target in $targets
+    do
+	rm -f target/linux/$target
+	./scripts/feeds install -p targets $target
+    done
 
-	# Workaround for bug in 22.03.0-rc4 where installed target path has been
-	# moved to target/linux/feeds but Config.in and Makefile from installed
-	# targets are not properly included from the new location.
-	# This hack is to be removed once the issues are fixed.
-	# Note that the above block of code might no longer necessary because
-	# targets no longer need to be installed explicitly.
-	echo "Working around installed-target-bug"
-	for f in target/linux/feeds/*; do
-		ln -vsf "feeds/$(basename "$f")" "target/linux/$(basename "$f")"
-	done
+    # install all packages
+    ./scripts/feeds install -a
 
-	# install all packages
-	./scripts/feeds install -a
+    # remove broken symlinks ( for packages that are no longer in the feed )
+    find -L package/feeds -maxdepth 2 -type l -delete
 
-	# remove broken symlinks ( for packages that are no longer in the feed )
-	find -L package/feeds -maxdepth 2 -type l -delete
+    cp .genconfig_config_bak .config
+    make defconfig
 
-	cp .genconfig_config_bak .config
-	make defconfig
+    # record when we last run this script
+    touch tmp/.iop_bootstrap
 
-	# record when we last run this script
-	touch tmp/.iop_bootstrap
-
-	# always return true
-	exit 0
+    # always return true
+    exit 0
 }
 
 register_command "feeds_update" "Update feeds to point to commit hashes from feeds.conf"
+

iop/scripts/genconfig.sh

@@ -13,12 +13,14 @@ function genconfig {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	bcm27xx="target/linux/iopsys-bcm27xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	mediatek="target/linux/iopsys-mediatek"
+	econet="target/linux/iopsys-econet"
+	intel_mips="target/linux/intel_mips"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -84,8 +86,8 @@ function genconfig {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -108,21 +110,25 @@ function genconfig {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $mediatek/genconfig ] &&
+			iopsys_mediatek=$(cd $mediatek; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $intel_mips/genconfig ] &&
+			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
+		[ -e $bcm27xx/genconfig ] &&
+			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -131,34 +137,18 @@ function genconfig {
 			return
 	    fi
 
-	    for p in $brcmbca; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
 
-	    for p in $airoha; do
+	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_x86; do
-		if [ $p == $profile ]; then
-		    target="iopsys_x86"
-			target_config_path="$x86_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_armvirt; do
-		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
-			target_config_path="$armvirt_feed/config"
+		    target="iopsys_ramips"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
@@ -166,18 +156,51 @@ function genconfig {
 	    for p in $iopsys_mediatek; do
 		if [ $p == $profile ]; then
 		    target="iopsys_mediatek"
-			target_config_path="$mediatek_feed/config"
+			target_config_path="$mediatek/config"
 		    return
 		fi
 	    done
 
-	    for p in $ipq95xx; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
+
+	    for p in $iopsys_intel_mips; do
+		if [ $p == $profile ]; then
+		    target="intel_mips"
+			target_config_path="$intel_mips/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_x86; do
+		if [ $p == $profile ]; then
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_armvirt; do
+		if [ $p == $profile ]; then
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_bcm27xx; do
+		if [ $p == $profile ]; then
+		    target="iopsys_bcm27xx"
+			target_config_path="$bcm27xx/config"
+		    return
+		fi
+	    done
+
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
@@ -265,22 +288,11 @@ function genconfig {
 	setup_dirs()
 	{
 		git remote -v | grep -q http || {
-			CUSTBRANCH="$(git rev-parse --abbrev-ref HEAD)"
 			if git ls-remote $CUSTREPO -q 2>/dev/null; then
 				if [ ! -d "$CUSTPATH" ]; then
-					echo "Cloning $CUSTBRANCH branch of $CUSTREPO"
-					git clone -b "$CUSTBRANCH" "$CUSTREPO" "$CUSTPATH" 2>/dev/null || {
-						DEFBRANCH="$(git remote show $CUSTREPO | grep 'HEAD branch' | cut -d' ' -f5)"
-						echo "$CUSTBRANCH branch is not found, cloning $DEFBRANCH branch of $CUSTREPO"
-						git clone "$CUSTREPO" "$CUSTPATH"
-					}
+					git clone "$CUSTREPO" "$CUSTPATH"
 				elif [ $IMPORT -eq 1 ]; then
 					cd $CUSTPATH
-					echo "Checking out $CUSTBRANCH branch in $CUSTPATH"
-					git checkout "$CUSTBRANCH" 2>/dev/null || {
-						DEFBRANCH="$(git symbolic-ref refs/remotes/origin/HEAD | cut -d '/' -f4)"
-						echo "Checking out $CUSTBRANCH branch has failed, using $DEFBRANCH branch in $CUSTPATH"
-					}
 					v "git pull"
 					git pull
 					cd - >/dev/null #go back
@@ -340,26 +352,36 @@ function genconfig {
 		    echo "" >> .config
 		fi
 
-		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-		airoha | iopsys_mediatek | brcmbca | ipq95xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		#special handling for intel_mips/iopsys_ramips which use TARGET_DEVICES
+		if [ "$target" = "intel_mips" ]; then
+			subtarget="xrx500"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			device=$(echo $BOARDTYPE | tr a-z A-Z)
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
+		elif [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_mediatek" ]; then
+			subtarget="mt7622"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		elif [ "$target" = "iopsys_bcm27xx" ]; then
+			subtarget="iopsys_bcm2711"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -388,15 +410,12 @@ function genconfig {
 		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always --dirty --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected

iop/scripts/genconfig_min.sh

@@ -12,12 +12,14 @@ function genconfig_min {
 	export DEVELOPER=0
 	target="bogus"
 	target_config_path=""
-	brcmbca_feed="target/linux/feeds/brcmbca"
-	airoha_feed="target/linux/feeds/airoha"
-	x86_feed="target/linux/feeds/iopsys-x86"
-	armvirt_feed="target/linux/feeds/iopsys-armvirt"
-	mediatek_feed="target/linux/feeds/iopsys-mediatek"
-	qualcomm_ipq95xx_feed="target/linux/feeds/ipq95xx"
+	bcm27xx="target/linux/iopsys-bcm27xx"
+	brcm63xx_arm="target/linux/iopsys-brcm63xx-arm"
+	ramips="target/linux/iopsys-ramips"
+	mediatek="target/linux/iopsys-mediatek"
+	econet="target/linux/iopsys-econet"
+	intel_mips="target/linux/intel_mips"
+	x86="target/linux/iopsys-x86"
+	armvirt="target/linux/iopsys-armvirt"
 
 	Red='\033[0;31m'          # Red
 	Color_Off='\033[0m'       # Text Reset
@@ -83,8 +85,8 @@ function genconfig_min {
 
 		[ -n "$profile" ] || return
 
-		if [ -n "$TARGET" -a -d "./target/linux/feeds/$TARGET" ]; then
-			local targetpath="./target/linux/feeds/$TARGET"
+		if [ -n "$TARGET" -a -d "./target/linux/$TARGET" ]; then
+			local targetpath="./target/linux/$TARGET"
 			local profiles=
 			local pfound=0
 
@@ -107,21 +109,25 @@ function genconfig_min {
 			return
 		fi
 
-		[ -e $brcmbca_feed/genconfig ] &&
-			brcmbca=$(cd $brcmbca_feed; ./genconfig)
-		[ -e $airoha_feed/genconfig ] &&
-			airoha=$(cd $airoha_feed; ./genconfig)
-		[ -e $x86_feed/genconfig ] &&
-			iopsys_x86=$(cd $x86_feed; ./genconfig)
-		[ -e $armvirt_feed/genconfig ] &&
-			iopsys_armvirt=$(cd $armvirt_feed; ./genconfig)
-		[ -e $mediatek_feed/genconfig ] &&
-			iopsys_mediatek=$(cd $mediatek_feed; ./genconfig)
-		[ -e $qualcomm_ipq95xx_feed/genconfig ] &&
-			ipq95xx=$(cd $qualcomm_ipq95xx_feed; ./genconfig)
+		[ -e $brcm63xx_arm/genconfig ] &&
+			iopsys_brcm63xx_arm=$(cd $brcm63xx_arm; ./genconfig)
+		[ -e $ramips/genconfig ] &&
+			iopsys_ramips=$(cd $ramips; ./genconfig)
+		[ -e $mediatek/genconfig ] &&
+			iopsys_mediatek=$(cd $mediatek; ./genconfig)
+		[ -e $econet/genconfig ] &&
+			iopsys_econet=$(cd $econet; ./genconfig)
+		[ -e $intel_mips/genconfig ] &&
+			iopsys_intel_mips=$(cd $intel_mips; ./genconfig)
+		[ -e $x86/genconfig ] &&
+			iopsys_x86=$(cd $x86; ./genconfig)
+		[ -e $armvirt/genconfig ] &&
+			iopsys_armvirt=$(cd $armvirt; ./genconfig)
+		[ -e $bcm27xx/genconfig ] &&
+			iopsys_bcm27xx=$(cd $bcm27xx; ./genconfig)
 
 	    if [ "$profile" == "LIST" ]; then
-			for list in brcmbca airoha iopsys_x86 iopsys_armvirt iopsys_mediatek ipq95xx; do
+			for list in iopsys_brcm63xx_arm iopsys_ramips iopsys_mediatek iopsys_econet iopsys_intel_mips iopsys_x86 iopsys_armvirt iopsys_bcm27xx; do
 				echo "$list based boards:"
 				for b in ${!list}; do
 					echo -e "\t$b"
@@ -130,34 +136,18 @@ function genconfig_min {
 			return
 	    fi
 
-	    for p in $brcmbca; do
+	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
-		    target="brcmbca"
-			target_config_path="$brcmbca_feed/config"
+		    target="iopsys_brcm63xx_arm"
+			target_config_path="$brcm63xx_arm/config"
 		    return
 		fi
 	    done
 
-	    for p in $airoha; do
+	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
-		    target="airoha"
-			target_config_path="$airoha_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_x86; do
-		if [ $p == $profile ]; then
-		    target="iopsys_x86"
-			target_config_path="$x86_feed/config"
-		    return
-		fi
-	    done
-
-	    for p in $iopsys_armvirt; do
-		if [ $p == $profile ]; then
-		    target="iopsys_armvirt"
-			target_config_path="$armvirt_feed/config"
+		    target="iopsys_ramips"
+			target_config_path="$ramips/config"
 		    return
 		fi
 	    done
@@ -165,22 +155,61 @@ function genconfig_min {
 	    for p in $iopsys_mediatek; do
 		if [ $p == $profile ]; then
 		    target="iopsys_mediatek"
-			target_config_path="$mediatek_feed/config"
+			target_config_path="$mediatek/config"
 		    return
 		fi
 	    done
 
-	    for p in $ipq95xx; do
+	    for p in $iopsys_econet; do
 		if [ $p == $profile ]; then
-		    target="ipq95xx"
-			target_config_path="$qualcomm_ipq95xx_feed/config"
+		    target="iopsys_econet"
+			target_config_path="$econet/config"
 		    return
 		fi
 	    done
+
+	    for p in $iopsys_intel_mips; do
+		if [ $p == $profile ]; then
+		    target="intel_mips"
+			target_config_path="$intel_mips/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_x86; do
+		if [ $p == $profile ]; then
+		    target="iopsys_x86"
+			target_config_path="$x86/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_armvirt; do
+		if [ $p == $profile ]; then
+		    target="iopsys_armvirt"
+			target_config_path="$armvirt/config"
+		    return
+		fi
+	    done
+
+	    for p in $iopsys_bcm27xx; do
+		if [ $p == $profile ]; then
+		    target="iopsys_bcm27xx"
+			target_config_path="$bcm27xx/config"
+		    return
+		fi
+	    done
+
 	}
 
 	git remote -v | grep -qE '(git@|ssh://)' && {
 		DEVELOPER=1
+
+		bcmAllowed=0
+		endptAllowed=0
+
+		git ls-remote git@dev.iopsys.eu:broadcom/bcmcreator.git -q 2>/dev/null && bcmAllowed=1
+		git ls-remote git@dev.iopsys.eu:iopsys/endptmngr.git -q 2>/dev/null && endptAllowed=1
 	}
 
 	v() {
@@ -314,26 +343,38 @@ function genconfig_min {
 		    echo "" >> .config
 		fi
 
-		# Special handling for targets which use TARGET_DEVICES
-		case "$target" in
-			airoha | iopsys_mediatek | brcmbca | ipq95xx)
-			# This assumes the device name to be unique within one target,
-			# which is a fair assumption to make.
-			local mk_file="$(grep -Fx --files-with-matches "define Device/${BOARDTYPE}" "$target_config_path/../image/"*.mk)"
-			if [ -z "$mk_file" ]; then
-				echo "Error determining subtarget for $target / ${BOARDTYPE}"
-				return 1
-			fi
-			local subtarget="$(basename "${mk_file%.mk}")"
+		#special handling for intel_mips/iopsys_ramips which use TARGET_DEVICES
+		if [ "$target" = "intel_mips" ]; then
+			subtarget="xrx500"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			device=$(echo $BOARDTYPE | tr a-z A-Z)
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${device}=y" >> .config
+		elif [ "$target" = "iopsys_ramips" ]; then
+			subtarget="mt7621"
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
 			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
-			;;
-		*)
+		elif [ "$target" = "iopsys_mediatek" ]; then
+			subtarget="mt7622"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+		elif [ "$target" = "iopsys_econet" ]; then
+			subtarget="en7562"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+		elif [ "$target" = "iopsys_bcm27xx" ]; then
+			subtarget="iopsys_bcm2711"
+			echo "CONFIG_TARGET_${target}=y" >> .config
+			echo "CONFIG_TARGET_${target}_${subtarget}=y" >> .config
+			echo "CONFIG_TARGET_MULTI_PROFILE=y" >> .config
+			echo "CONFIG_TARGET_PER_DEVICE_ROOTFS=y" >> .config
+			echo "CONFIG_TARGET_DEVICE_${target}_${subtarget}_DEVICE_${BOARDTYPE}=y" >> .config
+		else
 			echo "CONFIG_TARGET_${target}=y" >> .config
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
-			;;
-		esac
+		fi
 
 		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
@@ -362,15 +403,12 @@ function genconfig_min {
 		fi
 
 		# Set target version
-		local git_version
-		if ! git_version="$(git describe --always --dirty --tags --match '[0-9].*.*' --match '[0-9][0-9].*.*')"; then
-			echo "ERROR: Failed getting version via git describe, exiting." >&2
-			return 1
-		fi
-		local version="${git_version,,}${CUSTOMERS:+-${CUSTOMERS// /}}"
-		local version_lower="${version,,}"
-		echo "CONFIG_TARGET_VERSION=\"${version_lower}\"" >> .config
-		echo "CONFIG_VERSION_CODE=\"${version_lower}\"" >> .config
+		local GIT_TAG=$(git describe --abbrev=0 --tags)
+		local GIT_REV=$(git rev-parse --short HEAD)
+		local GIT_VER="$GIT_TAG"
+		git describe --contains $GIT_REV >/dev/null 2>&1 || GIT_VER="${GIT_TAG}_${GIT_REV}"
+		echo "CONFIG_TARGET_VERSION=\"${GIT_VER}\"" >> .config
+		echo "CONFIG_VERSION_CODE=\"${GIT_VER}\"" >> .config
 		echo "CONFIG_VERSION_PRODUCT=\"$BOARDTYPE"\" >> .config
 
 		# Enable Package source tree override if selected

iop/scripts/install_key.sh

@@ -48,10 +48,7 @@ function ssh_install_key {
     local keys="$(get_ssh_public_keys)"
     echo "Adding the following keys to $DROPBEAR_AUTHORIZED_KEYS_FILE on $host:"
     echo "$keys"
-    ssh \
-        -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
-        root@$host \
-        "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
+    ssh root@$host "echo '$keys' >> '$DROPBEAR_AUTHORIZED_KEYS_FILE'" && echo ok
 }
 
 register_command "ssh_install_key" "Install the users public ssh key on host running dropbear"

iop/scripts/iopupgrade.sh

@@ -1,283 +1,344 @@
 # this is a developer helper script to install firmware on a remote host with SSH
 
 function upd_usage {
-	echo "usage: $0 ssh_upgrade [-t <host>] [-f <file>] [opts] "
-	echo ""
-	echo "   Default host is 192.168.1.1"
-	echo "   Default firmware file is the latest one (last.{itb,pkgtb})"
-	echo "   Default is to not keep configuration"
-	echo "opts:"
-	echo ""
-	echo "	-i	Interactive use, allows to select firmware file"
-	echo "	-n	Do not do the final reboot of the target board"
-	echo "	-c	Keep configuration"
-	echo "	-x	Force install even if firmware is not for this board"
-	echo "	-b	Force install of bootloader regardless of version installed"
+    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
+    echo ""
+    echo "   Default host is 192.168.1.1"
+    echo "   Default firmware file is the newest one found"
+    echo "   Default is to not keep configuration"
+    echo "opts:"
+    echo ""
+    echo "	-i	Interactive use, Allows to select firmware file"
+    echo "	-n	Do not do the final reboot of the target board"
+    echo "	-c	Keep configuration"
+    echo "	-x	Force install even if firmware is not for this board"
+    echo "	-b	Force install of bootloader regardless of version installed"
+    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
 }
 
 function set_config_string {
-	eval $(grep $1 .config)
+    eval `grep $1 .config`
 }
 
 function upd_ask_ok {
-	echo "Will continue with the following settings:"
-	echo "-----------------------------------------"
-	printf "%20s: %s\n" "Firmware file" "$upd_fw_base"
-	printf "%20s: %s\n" "Host IP" "$upd_host"
-	printf "%20s: " "Reboot"
-	if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Keep config"
-	if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force bootloader"
-	if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	printf "%20s: " "Force image upgrade"
-	if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi
-	echo "-----------------------------------------"
+    echo "Will Continue with the following settings"
+    echo "-----------------------------------------"
+    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
+    printf "%20s: %s\n"  "Host ip" "$upd_host"
+    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
+    echo "-----------------------------------------"
 
-	echo -n "Continue? [Y/n/q]:"
-	read answer
+    if [ "$upd_sysupgrade" == "0" ]
+       then
+	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
+    fi
 
-	case $answer in
-	n | N)
-		return 1
-		;;
-	q | Q)
-		exit 1
-		;;
-	y | Y | *)
-		return 0
-		;;
-	esac
+    echo -n "Continue? [Y/n/q]:"
+    read answer
+
+    case $answer in
+	n|N)
+	    return 1;;
+	q|Q)
+	    exit 1;;
+	y|Y|*)
+	    return 0;;
+    esac
 }
 
 function upd_select_file {
-	dialog --keep-tite --title "To select a file, use TAB/ARROW to highlight then press SPACEBAR -> RETURN" \
-		--fselect "${upd_fw:-bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/}" \
-		$((lines - 10)) $((cols - 5)) \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_fw="$new_file"
-		upd_fw_base=$(basename $upd_fw)
-	fi
+    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
+	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
+	   $((lines -10)) $((cols -5)) \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_fw="$new_file"
+	upd_fw_base=$(basename $upd_fw);
+    fi
 }
 
 function upd_select_target {
-	dialog --keep-tite --title "Input the hostname/IP of the target board" \
-		--inputbox "Name/IP" \
-		$((lines - 10)) $((cols - 5)) \
-		"$upd_host" \
-		2>$tempfile
 
-	new_file=$(cat $tempfile)
-	if [ -n "$new_file" ]; then
-		upd_host="$new_file"
-	fi
+    dialog --keep-tite --title "Input the name/ip number of target board" \
+	   --inputbox "Name/IP" \
+	   $((lines -10)) $((cols -5)) \
+	   "$upd_host" \
+	   2> $tempfile
+
+    new_file=$(cat $tempfile)
+    if [ -n "$new_file" ]
+    then
+	upd_host="$new_file"
+    fi
 }
 
-function upd_select_reboot {
-	dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Reboot" "Restart board after done" $(if [ "$upd_noreboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		"No reboot" "Continue running old system" $(if [ "$upd_noreboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+function upd_select_reboot {
+    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
 	"No reboot")
-		upd_noreboot=1
-		;;
+	    upd_noreboot=1
+	;;
 	"Reboot")
-		upd_noreboot=0
-		;;
-	esac
+	    upd_noreboot=0
+	    ;;
+    esac
 }
 
 function upd_select_config {
-	dialog --keep-tite --radiolist "Should the configuration be kept" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Keep" "Keep the config from old system" $(if [ "$upd_keepconf" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Default" "Use default config for new system" $(if [ "$upd_keepconf" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the configuration be keept" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Keep")
-		upd_keepconf=1
-		;;
+	    upd_keepconf=1
+	    ;;
 	"Default")
-		upd_keepconf=0
-		;;
-	esac
+	    upd_keepconf=0
+	    ;;
+    esac
 }
 
 function upd_select_forceboot {
-	dialog --keep-tite --radiolist "Should the boot loader be updated regardless of the version installed" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Always update boot loader" $(if [ "$upd_forceboot" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Version check" "Only upgrade if version is newer" $(if [ "$upd_forceboot" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceboot=1
-		;;
+	    upd_forceboot=1
+	    ;;
 	"Version check")
-		upd_forceboot=0
-		;;
-	esac
+	    upd_forceboot=0
+	    ;;
+    esac
 }
 
 function upd_select_forceimage {
-	dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Force" "Disable sanity check and force use of image (dangerous)" $(if [ "$upd_forceimage" == "1" ]; then echo "ON"; else echo "OFF"; fi) \
-		"Only compatible" "Normal checks apply" $(if [ "$upd_forceimage" == "0" ]; then echo "ON"; else echo "OFF"; fi) \
-		2>$tempfile
+    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
 
-	res=$(cat $tempfile)
-	case $res in
+    res=$(cat $tempfile)
+    case $res in
 	"Force")
-		upd_forceimage=1
-		;;
+	    upd_forceimage=1
+	    ;;
 	"Only compatible")
-		upd_forceimage=0
-		;;
-	esac
+	    upd_forceimage=0
+	    ;;
+    esac
+}
+
+function upd_select_sysupgrade {
+    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
+	   2> $tempfile
+
+    res=$(cat $tempfile)
+    case $res in
+	"iopu")
+	    upd_sysupgrade=0
+	    ;;
+	"sysupgrade")
+	    upd_sysupgrade=1
+	    ;;
+    esac
 }
 
 function upd_select {
-	dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select item to change" \
-		$((lines - 5)) $((cols - 5)) $((lines - 5 - 5)) \
-		"Firmware file" "$upd_fw_base" \
-		"Host IP" "$upd_host" \
-		"Reboot" $(if [ "$upd_noreboot" == "0" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Keep config" $(if [ "$upd_keepconf" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force bootloader" $(if [ "$upd_forceboot" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		"Force image upgrade" $(if [ "$upd_forceimage" == "1" ]; then printf "Yes\n"; else printf "No\n"; fi) \
-		2>$tempfile
 
-	case $(cat $tempfile) in
-	"Firmware file")
-		upd_select_file
-		;;
-	"Host IP")
-		upd_select_target
-		;;
+    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
+	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
+	   "Firmare file" "$upd_fw_base"\
+	   "Host ip" "$upd_host" \
+	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
+	   2> $tempfile
+
+
+    case $(cat $tempfile) in
+	"Firmare file")
+	    upd_select_file
+	    ;;
+	"Host ip")
+	    upd_select_target
+	    ;;
 	"Reboot")
-		upd_select_reboot
-		;;
+	    upd_select_reboot
+	    ;;
 	"Keep config")
-		upd_select_config
-		;;
+	    upd_select_config
+	    ;;
 	"Force bootloader")
-		upd_select_forceboot
-		;;
+	    upd_select_forceboot
+	    ;;
 	"Force image upgrade")
-		upd_select_forceimage
-		;;
+	    upd_select_forceimage
+	    ;;
+	"sysupgrade")
+	    upd_select_sysupgrade
+	    ;;
 	*)
-		return
-		;;
-	esac
-	upd_select
+	    return
+	;;
+    esac
+    upd_select
 }
 function upd_select_start {
-	lines=$(tput lines)
-	cols=$(tput cols)
-	tempfile="$(mktemp)"
-	trap "rm -f $tempfile" 0 1 2 5 15
-	upd_select
+    lines=$(tput lines)
+    cols=$(tput cols)
+    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
+    trap "rm -f $tempfile" 0 1 2 5 15
+    upd_select
 
 }
 
 function ssh_upgrade {
-	upd_noreboot=0
-	upd_forceboot=0
-	upd_keepconf=0
-	upd_forceimage=0
-	upd_fw_base=""
-	upd_fw=""
-	upd_host="192.168.1.1"
-	do_dialog=0
+    upd_noreboot=0
+    upd_forceboot=0
+    upd_keepconf=0
+    upd_forceimage=0
+    upd_fw_base=""
+    upd_fw=""
+    upd_host="192.168.1.1"
+    upd_sysupgrade=1
+    do_dialog=0
 
-	while getopts "f:hnxt:icb" opt; do
-		case $opt in
-		n)
-			upd_noreboot=1
-			;;
-		x)
-			upd_forceimage=1
-			;;
-		b)
-			upd_forceboot=1
-			;;
-		c)
-			upd_keepconf=1
-			;;
-		v)
-			verbose=$OPTARG
-			;;
-		f)
-			upd_fw=$OPTARG
-			;;
-		t)
-			upd_host=$OPTARG
-			;;
-		i)
-			do_dialog=1
-			;;
-		h)
-			upd_usage
-			exit 1
-			;;
-		\?)
-			echo "Invalid option: -$OPTARG" >&2
-			exit 1
-			;;
-		esac
-	done
-
-	if [ -z "$upd_fw" ]; then
-		set_config_string CONFIG_TARGET_BOARD
-		set_config_string CONFIG_TARGET_SUBTARGET
-		upd_fw="$(realpath -q --canonicalize-existing --relative-to=. "bin/targets/$CONFIG_TARGET_BOARD/$CONFIG_TARGET_SUBTARGET/"last.{pkgtb,itb})"
-		if [ -z "$upd_fw" ] && [ $do_dialog -eq 0 ]; then
-			echo "Could not find image. Check that last.{itb,pkgtb} exists or specify an image using -f <image> or -i (interactive)." >&2
-			return 1
-		fi
-	fi
-	upd_fw_base="$(basename "$upd_fw")"
-
-	[ $do_dialog -eq 1 ] && upd_select_start
-
-	if ! upd_ask_ok; then
-		upd_select_start
-		if ! upd_ask_ok; then
-			exit 1
-		fi
-	fi
-
-	if [ ! -f $upd_fw ]; then
-		echo "Firmware file $firmware does not exist."
+    while getopts "f:hnxt:iscb" opt; do
+	case $opt in
+	    n)
+		upd_noreboot=1
+		;;
+	    x)
+		upd_forceimage=1
+		;;
+	    b)
+		upd_forceboot=1
+		;;
+	    c)
+		upd_keepconf=1
+		;;
+	    v)
+		verbose=$OPTARG
+		;;
+	    f)
+		upd_fw=$OPTARG
+		;;
+	    t)
+		upd_host=$OPTARG
+		;;
+	    i)
+		do_dialog=1
+		;;
+	    s)
+		upd_sysupgrade=1
+		;;
+	    h)
+		upd_usage
 		exit 1
+		;;
+	    \?)
+		echo "Invalid option: -$OPTARG" >&2
+		exit 1
+		;;
+	esac
+    done
+
+    if [ -n "$upd_fw" ]
+    then
+	upd_fw_base=$(basename $upd_fw);
+    else
+	set_config_string CONFIG_TARGET_BOARD
+	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
+
+	# if target uses pkgtb
+	if [ -z "$firmwares"]
+	then
+	    # pkgtb files can not be streamed so copy over the file witch scp
+	    use_scp=1
+	    firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t last.pkgtb)
 	fi
 
-	extra_args=""
-	[ $upd_noreboot -eq 1 ] && extra_args="$extra_args --no-reboot"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args --force"
-	[ $upd_keepconf -eq 0 ] && extra_args="$extra_args -n"
-	[ $upd_forceboot -eq 1 ] && extra_args="$extra_args --force-loader-upgrade"
+	for upd_fw_base in $firmwares
+	do
+	    #echo "firmware $upd_fw"
+	    break
+	done
+	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
+    fi
 
-	pv "$upd_fw" |
-		ssh \
-			-o ConnectTimeout=60 \
-			-o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null \
-			root@"$upd_host" \
-			sh -c "cat > '/tmp/$upd_fw_base' && (set -x && sysupgrade -v $extra_args /tmp/$upd_fw_base)" ||
-		echo "Sysupgrade failed" >&2 && return 1
+    [ $do_dialog -eq 1 ] && upd_select_start
+
+    if ! upd_ask_ok
+    then
+	upd_select_start
+	if ! upd_ask_ok
+	then
+	    exit 1
+	fi
+    fi
+
+    if [ ! -f $upd_fw ]
+    then
+	echo "firmware file $firmware do not exist"
+	exit 1
+    fi
+
+    if [ $upd_sysupgrade -eq 0 ]
+    then
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
+	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
+	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
+
+	file_size_kb=`du -k "$upd_fw" | cut -f1`
+	if [ "$use_scp" == "1" ]
+	then
+	    scp $upd_fw root@$upd_host:/tmp/ &&
+		ssh -o ConnectTimeout=60 root@$upd_host "iopu $extra_arg -f /tmp/$upd_fw_base"
+	else
+	    cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
+	fi
+    else
+	extra_args=""
+	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -d"
+	[ $upd_keepconf   -eq 0 ] && extra_args="$extra_args -n"
+
+	scp $upd_fw root@$upd_host:/tmp/ &&
+	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $extra_args /tmp/$upd_fw_base" &&
+	    echo "sysupgrade done!"
+    fi
 }
 
-register_command "ssh_upgrade" "-t <host> -f <file> [opts]  Install firmware on remote host with SSH"
+register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
+
+

libjwt/Makefile

@@ -0,0 +1,54 @@
+
+# Copyright (C) 2018 Iopsys
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libjwt
+PKG_VERSION:=1.0.0
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
+PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+
+PKG_FIXUP:=autoreconf
+
+PKG_LICENSE:=LGPLv3
+PKG_LICENSE_FILES:=COPYING
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libjwt
+  CATEGORY:=Libraries
+  DEPENDS:=+libopenssl +jansson
+  TITLE:= libjwt
+endef
+
+
+#TARGET_CFLAGS += \
+#	-I$(STAGING_DIR)/usr/include
+#	-I$(STAGING_DIR)/usr/include/libnl3
+
+#MAKE_FLAGS += \
+#	CFLAGS="$(TARGET_CFLAGS)" \
+#	LDFLAGS="$(TARGET_LDFLAGS)" \
+#	FPIC="$(FPIC)" \
+#	PLATFORM="$(TARGET_PLATFORM)" \
+#	subdirs="$(subdirs)"
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+define Package/libjwt/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libjwt))

libmicroxml/Makefile

@@ -0,0 +1,57 @@
+#
+# Copyright (C) 2012-2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libmicroxml
+PKG_VERSION:=2012-06-11
+PKG_RELEASE=$(PKG_SOURCE_VERSION)
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL:=https://dev.iopsys.eu/mirror/microxml.git
+PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE_VERSION:=72965423184f24cc0b963d91c2d1863cdb01b6aa
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
+PKG_MIRROR_HASH:=skip
+PKG_LICENSE:=LGPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libmicroxml
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=XML library
+  MAINTAINER:=Luka Perkov <luka@openwrt.org>
+endef
+
+define Package/libmicroxml/description
+ A micro sized XML library
+endef
+
+CONFIGURE_ARGS += \
+	--disable-threads \
+	--enable-static \
+	--enable-shared
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_BUILD_DIR)/microxml.h $(1)/usr/include
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_BUILD_DIR)/microxml.pc $(1)/usr/lib/pkgconfig
+endef
+
+define Package/libmicroxml/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libmicroxml.so* $(1)/usr/lib
+endef
+
+$(eval $(call BuildPackage,libmicroxml))

libmicroxml/patches/100-fix-memleak.patch

@@ -0,0 +1,130 @@
+diff --git a/mxml-file.c b/mxml-file.c
+index 02eca9d..f10d202 100644
+--- a/mxml-file.c
++++ b/mxml-file.c
+@@ -363,9 +363,12 @@ mxmlSaveFile(mxml_node_t    *node,	/* I - Node to write */
+   * Write the node...
+   */
+ 
+-  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0)
++  if ((col = mxml_write_node(node, fp, cb, 0, mxml_file_putc, global)) < 0){
++    global_free(global);
+     return (-1);
+-
++  }
++  
++  global_free(global);
+   if (col > 0)
+     if (putc('\n', fp) < 0)
+       return (-1);
+@@ -1448,6 +1451,7 @@ mxml_load_data(
+   if ((buffer = malloc(64)) == NULL)
+   {
+     mxml_error("Unable to allocate string buffer!");
++    global_free(global);
+     return (NULL);
+   }
+ 
+@@ -2083,11 +2087,12 @@ mxml_load_data(
+ 		 node->parent ? node->parent->value.element.name : "(null)");
+ 
+       mxmlDelete(first);
+-
++      global_free(global);
+       return (NULL);
+     }
+   }
+ 
++  global_free(global);
+   if (parent)
+     return (parent);
+   else
+@@ -2102,7 +2107,7 @@ error:
+   mxmlDelete(first);
+ 
+   free(buffer);
+-
++  global_free(global);
+   return (NULL);
+ }
+ 
+diff --git a/mxml-private.c b/mxml-private.c
+index 4378ca3..ea6e452 100644
+--- a/mxml-private.c
++++ b/mxml-private.c
+@@ -41,6 +41,32 @@
+  * This code currently supports AIX, HP-UX, Linux, Mac OS X, Solaris, and
+  * Windows.  It might work on the BSDs and IRIX, but I haven't tested that.
+  */
++void *global_mem[16] = {0};
++
++static void *global_calloc(int x, int size)
++{
++  int i;
++  void *m = calloc(x, size);
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i > 0; i--) {
++    global_mem[i] = global_mem[i-1];
++  }
++  global_mem[0] = m;
++  return m;
++}
++
++void global_free(void *m)
++{
++  int i;
++  if (m == NULL)
++    return;
++  for (i = ((sizeof(global_mem)/sizeof(global_mem[0])) - 1); i >= 0; i--) {
++    if (global_mem[i] == m) {
++      global_mem[i] = NULL;
++      free(m);
++      break;
++    }
++  }
++}
+ 
+ #if defined(__sun) || defined(_AIX)
+ #  pragma fini(_mxml_fini)
+@@ -148,7 +174,6 @@ mxml_real_cb(mxml_node_t *node)		/* I - Current node */
+   return (MXML_REAL);
+ }
+ 
+-
+ #ifdef HAVE_PTHREAD_H			/**** POSIX threading ****/
+ #  include <pthread.h>
+ 
+@@ -190,7 +215,6 @@ _MXML_FINI(void)
+   }
+ }
+ 
+-
+ /*
+  * '_mxml_global()' - Get global data.
+  */
+@@ -205,7 +229,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)pthread_getspecific(_mxml_key)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+     pthread_setspecific(_mxml_key, global);
+ 
+     global->num_entity_cbs = 1;
+@@ -288,7 +312,7 @@ _mxml_global(void)
+ 
+   if ((global = (_mxml_global_t *)TlsGetValue(_mxml_tls_index)) == NULL)
+   {
+-    global = (_mxml_global_t *)calloc(1, sizeof(_mxml_global_t));
++    global = (_mxml_global_t *)global_calloc(1, sizeof(_mxml_global_t));
+ 
+     global->num_entity_cbs = 1;
+     global->entity_cbs[0]  = _mxml_entity_cb;
+diff --git a/mxml-private.h b/mxml-private.h
+index c591208..72ed338 100644
+--- a/mxml-private.h
++++ b/mxml-private.h
+@@ -43,3 +43,4 @@ typedef struct _mxml_global_s
+ extern _mxml_global_t	*_mxml_global(void);
+ extern int		_mxml_entity_cb(const char *name);
+ 
++extern void global_free(void *m);