update hash

dectmngr2/Makefile

@@ -42,7 +42,6 @@ define Package/dectmngr2/install
 	$(INSTALL_DIR) $(1)/etc/dect/
 	$(INSTALL_DIR) $(1)/etc/config/
 	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/etc/uci-defaults/
 
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dectmngr2 $(1)/usr/sbin/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/target.bin $(1)/etc/dect/
@@ -50,7 +49,6 @@ define Package/dectmngr2/install
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dect $(1)/etc/init.d/
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/files/dectmngr-wrapper.sh $(1)/usr/sbin/
 	$(CP) ./files/dect.config $(1)/etc/config/dect
-	$(CP) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
 endef
 
 $(eval $(call BuildPackage,dectmngr2))

dectmngr2/files/etc/uci-defaults/22-dect-defaults

@@ -1,23 +0,0 @@
-#!/bin/sh
-
-
-# Workaround for product DG400 which has an
-# incorrect value in nvram from factory.
-
-if [ -e "/proc/nvram/BoardId" ]; then
-	boardid=$(cat /proc/nvram/BoardId)
-	ulBoardStuffOption=$(cat /proc/nvram/ulBoardStuffOption)
-
-	if [ "$boardid" = "DG400R0" -a "$ulBoardStuffOption" = "0xffffffff" ]; then
-		echo "0xfffffff2" >/proc/nvram/ulBoardStuffOption
-
-		db -q batch <<-EOT
-			set hw.board.hasDect=1
-			commit hw.board
-		EOT
-	fi
-fi
-
-
-exit 0
-

easy-soc-libs/Makefile

@@ -9,7 +9,7 @@ PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=6a311af7cd17fc410c27de3cfae33b658195fd0b
+PKG_SOURCE_VERSION:=8989476ac5df494064ed94a52634be5c61fff037
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/easy-soc-libs.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@inteno.se>
 
@@ -60,9 +60,9 @@ else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
 else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
   TARGET_PLATFORM=MARVELL
   TARGET_CFLAGS +=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-  TARGET_PLATFORM=INTEL
-  TARGET_CFLAGS +=-DIOPSYS_INTEL
+else ifeq ($(CONFIG_TARGET_lantiq_xrx500),y)
+  TARGET_PLATFORM=LANTIQ
+  TARGET_CFLAGS +=-DIOPSYS_LANTIQ
 else
   $(info (UNEXPECTED CONFIG TARGET))
 endif

eventlog/Makefile

@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=eventlog
+PKG_VERSION:=0.2.9
+PKG_RELEASE:=2
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/eventlog/0.2/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=76e3d7a0b8f335c12099e9b91191fbf1
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/libeventlog
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=A new API to format and send structured log messages.
+endef
+
+define Package/eventlog/description
+  A new API to format and send structured log messages. It supports multiple message
+  representations (plain, XML attributes and XML tags) and multiple output methods
+  (local syslogd).
+endef
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/eventlog $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.{a,so*} $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/eventlog.pc $(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libeventlog/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/libevtlog.so* $(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libeventlog))

ice-client/Makefile

@@ -19,14 +19,14 @@ export PLATFORM_INCLUDE:=platforms/iopsys/build.mk
 
 export DATE:=$(shell date +%Y-%m-%d-%H-%M-%S)
 export LOGIN:=$(shell whoami)
-BASE_PKG_VERSION:=5.3.6
+BASE_PKG_VERSION:=5.2.3
 PKG_RELEASE:=
 PKG_VERSION:=$(BASE_PKG_VERSION)-$(PKG_RELEASE)_$(DATE)_$(LOGIN)
 export PKG_VERSION
 
 ###########################--RELEASE--################################
 
-PKG_SOURCE_VERSION:=94aab1532fef2caf2d65579614fc413252a517eb
+PKG_SOURCE_VERSION:=795cf8ce3cc19ff8bbb014c8ac456784c187dcc5
 ifeq ($(CONFIG_ICE_OPEN),y)
 TARGET_PROFILE=$(shell echo $(CONFIG_TARGET_BOARD) | sed s/\"//g)
 PKG_SOURCE_URL:=http://iopsys.inteno.se/iopsys/consumer/

ice-client/files/ice-client.uci_default

@@ -9,8 +9,6 @@ uci -q set passwords.ice=usertype
 uci -q set passwords.ice.password="\$WPAKEY"
 uci -q del_list passwords.ice._access_w=root
 uci -q add_list passwords.ice._access_w=root
-uci -q del_list passwords.ice._access_r=root
-uci -q add_list passwords.ice._access_r=root
 uci -q commit passwords
 
 uci show rpcd | grep username=.*ice.* >/dev/null || {

icwmp/Makefile

@@ -8,11 +8,11 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=icwmp
-PKG_VERSION:=4.0-2019-04-01
+PKG_VERSION:=4.0-2018-12-04
 PKG_FIXUP:=autoreconf
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/icwmp.git
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=7faa875dcb825869c6bd942e140d2200e5e0dc0e
+PKG_SOURCE_VERSION:=f9bbd7fb4a122dd523c2f2eaedec932c8483154f
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)

icwmp/README

@@ -9,7 +9,7 @@
 	- libz.so
 	- libcrypto.so
 	the librairies should be present in the "staging_dir/target-i386_uClibc-0.9.30.1/usr/lib/"  or "staging_dir/toolchain-mips_gcc-4.3.3+cs_uClibc-0.9.30.1/usr/lib"
-
+	
 	header files and folders:
 	- expat.h
 	- expat_external.h
@@ -33,7 +33,7 @@ this software is composed of 3 packages:
 - cwmp kernel package: contains cwmp kernel module. This module could be used by other kernel modules to notify the icwmpd daemon  when kernel parameter changes
 
 The three packages should be selected in the make menu config in order to get the three packages compiled.
-To compile the three packages: $ make package/cwmpd/compile
+To compile the three packages: $ make package/cwmpd/compile 
 
 3) OpenWRT settings
 in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script file:
@@ -49,7 +49,7 @@ in the  OpenWRT, Add the following lines in the /usr/share/udhcpc/default.script
 	- libopenssl package should be installed
 	- libz package should be installed
 	- libcrypto package should be installed
-
+    
     Configure the acs url in the /etc/config/icwmp
     and then start the cwmpd service: /etc/init.d/icwmpd start
     for the help: /etc/init.d/icwmpd

icwmp/files/etc/hotplug.d/iface/90-icwmp

@@ -75,11 +75,9 @@ handle_icwmp_restart() {
 		"$previpaddr" = "$curipaddr" -a \
 		"$prevgateway" = "$curgateway" -a \
 		"$prevsubnets" = "$cursubnets" -a \
-		"$prevdnsservers" = "$curdnsservers" \
-	] && {
-		[ "$prevopt43url" = "$curopt43url" ] &&	exit 0
-		[ -z "$prevopt43url" ] && exit 0
-	}
+		"$prevdnsservers" = "$curdnsservers" -a \
+		"$prevopt43url" = "$curopt43url" \
+	] && exit 0
 
 	/etc/init.d/icwmpd reload &
 }

ifbt/Makefile

@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2018 iopsys Software Solutions AB
+# Copyright (C) 2013 Inteno
 #
 
 include $(TOPDIR)/rules.mk
@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=ifbt
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=0286812ed8036dea758f904694dc416481fba64d
+PKG_SOURCE_VERSION:=a0572079265293ed99dc4d69fd38528760d29be9
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/ifbt.git
 
@@ -18,22 +18,6 @@ PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 
-ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_brcm63xx_arm),y)
-TARGET_PLATFORM:=-DIOPSYS_BROADCOM
-else ifeq ($(CONFIG_TARGET_iopsys_linksys),y)
-TARGET_PLATFORM:=-DIOPSYS_MARVELL
-else ifeq ($(CONFIG_TARGET_intel_mips),y)
-TARGET_PLATFORM:=-DIOPSYS_INTEL
-else ifeq ($(CONFIG_TARGET_iopsys_ramips),y)
-TARGET_PLATFORM:=-DIOPSYS_MEDIATEK
-else
-$(info (UNEXPECTED CONFIG TARGET))
-endif
-
-export TARGET_PLATFORM
-
 define Package/ifbt
 	CATEGORY:=Utilities
 	DEPENDS:=+libuci +libubox +libubus +libblobmsg-json +libjson-c  +libwifi +libjson-c

imonitor/Makefile

@@ -12,7 +12,7 @@ PKG_INSTALL:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/imonitor.git
-PKG_SOURCE_VERSION:=cea60630cfac1d3c70f486acea6663d339b7d444
+PKG_SOURCE_VERSION:=532f4900862bcb45d8cd4bf37555fabda81750b6
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>

inbd/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=inbd
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=12755fccb8ef87965ac684d62d56e19e73a255bd
+PKG_SOURCE_VERSION:=b846ae0ff55284392de2c4d874851b33edd7a6c5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/inbd
 

iop/configs/config

@@ -43,7 +43,7 @@ CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
 CONFIG_PACKAGE_iptables-mod-filter=y
 CONFIG_PACKAGE_iptables-mod-ipopt=y
 CONFIG_PACKAGE_iup=y
-# CONFIG_PACKAGE_iwatchdog is not set
+CONFIG_PACKAGE_iwatchdog=y
 CONFIG_PACKAGE_juci=y
 CONFIG_PACKAGE_juci-broadcom-iptv=y
 CONFIG_PACKAGE_juci-broadcom-pwrmgmt=y
@@ -226,5 +226,3 @@ CONFIG_KERNEL_DEVTMPFS=y
 CONFIG_KERNEL_DEVTMPFS_MOUNT=y
 CONFIG_PACKAGE_ip-full=y
 # CONFIG_BUSYBOX_CONFIG_IP is not set
-CONFIG_PACKAGE_iopupgrade=y
-

iop/configs/luci.diff

@@ -0,0 +1,38 @@
+CONFIG_PACKAGE_luci=y
+CONFIG_PACKAGE_luci-mod-admin-core=y
+CONFIG_PACKAGE_luci-mod-admin-full=y
+CONFIG_PACKAGE_luci-app-ddns=y
+CONFIG_PACKAGE_luci-app-dslstats=y
+CONFIG_PACKAGE_luci-app-firewall=y
+CONFIG_PACKAGE_luci-app-iup=y
+CONFIG_PACKAGE_luci-app-mcpd=y
+CONFIG_PACKAGE_luci-app-minidlna=y
+CONFIG_PACKAGE_luci-app-multiwan=y
+CONFIG_PACKAGE_luci-app-p910nd=y
+CONFIG_PACKAGE_luci-app-parental-control=y
+CONFIG_PACKAGE_luci-app-port-management=y
+CONFIG_PACKAGE_luci-app-power-mgmt=y
+CONFIG_PACKAGE_luci-app-samba=y
+CONFIG_PACKAGE_luci-app-sfp=y
+CONFIG_PACKAGE_luci-app-snmp=y
+CONFIG_PACKAGE_luci-app-speedtest=y
+CONFIG_PACKAGE_luci-app-upnp=y
+CONFIG_PACKAGE_luci-app-voice=y
+CONFIG_PACKAGE_luci-theme-base=y
+CONFIG_PACKAGE_luci-theme-bootstrap=y
+CONFIG_PACKAGE_luci-i18n-english=y
+CONFIG_PACKAGE_luci-proto-3g=y
+CONFIG_PACKAGE_luci-proto-4g=y
+CONFIG_PACKAGE_luci-proto-core=y
+CONFIG_PACKAGE_luci-proto-ipv6=y
+CONFIG_PACKAGE_luci-proto-ppp=y
+CONFIG_PACKAGE_luci-sgi-cgi=y
+CONFIG_PACKAGE_luci-lib-core=y
+CONFIG_PACKAGE_luci-lib-core_source=y
+CONFIG_PACKAGE_luci-lib-ipkg=y
+CONFIG_PACKAGE_luci-lib-json=y
+CONFIG_PACKAGE_luci-lib-nixio=y
+CONFIG_PACKAGE_luci-lib-nixio_notls=y
+CONFIG_PACKAGE_luci-lib-sys=y
+CONFIG_PACKAGE_luci-lib-web=y
+

iop/configs/target/intel_mips/config

@@ -0,0 +1,67 @@
+# CONFIG_BUSYBOX_CONFIG_BRCTL is not set
+CONFIG_GCC_VERSION="6.3.0"
+CONFIG_TOOLCHAINOPTS=y
+# CONFIG_BINUTILS_USE_VERSION_2_27 is not set
+CONFIG_BINUTILS_USE_VERSION_2_28=y
+# CONFIG_BINUTILS_USE_VERSION_2_29_1 is not set
+# CONFIG_GCC_USE_GRAPHITE is not set
+# CONFIG_GCC_USE_VERSION_5 is not set
+CONFIG_GCC_USE_VERSION_6=y
+# CONFIG_GCC_USE_VERSION_7 is not set
+# CONFIG_LIBC_USE_GLIBC is not set
+CONFIG_LIBC_USE_MUSL=y
+
+
+# CONFIG_PACKAGE_ppp-mod-pppoa is not set
+
+#################### switch related
+CONFIG_PACKAGE_switch_cli_ugw8=y
+
+#################### ppa related
+CONFIG_PACKAGE_ppacmd=y
+# CONFIG_PACKAGE_kmod-ppa-drv-gre is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-eth-bond is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-grx500-mpe is not set
+# CONFIG_PACKAGE_kmod-ppa-drv-mpe-ip97 is not set
+CONFIG_PACKAGE_mcast-pa=y
+
+#################### DSL related
+CONFIG_PACKAGE_dsl-cpe-control-vrx=y
+CONFIG_dsl-cpe-mei-vrx_DEVICE_VR11=y
+CONFIG_dsl-cpe-mei-vrx_IRQ_POLLING_ACTIVE=y
+CONFIG_PACKAGE_kmod-dsl-cpe-mei-vrx=y
+CONFIG_PACKAGE_ifxos=y
+CONFIG_PACKAGE_kmod-directconnect-dp=y
+CONFIG_PACKAGE_kmod-vrx518_tc_drv=y
+CONFIG_PACKAGE_vrx518_aca_fw=y
+CONFIG_PACKAGE_vrx518_ppe_fw=y
+CONFIG_dsl-cpe-api-vrx_MODEL_DEBUG=y
+CONFIG_dsl-cpe-control-vrx_DTI=y
+CONFIG_dsl-cpe-control-vrx_MODEL_DEBUG=y
+# yes intel dsl script need this.
+CONFIG_BUSYBOX_CONFIG_USLEEP=y
+#################### DSL related end
+
+#################### WIFI related
+CONFIG_PACKAGE_kmod-lantiq-wlan-wave-support_5_x=y
+CONFIG_PACKAGE_ltq-wlan-wave_5_x=y
+CONFIG_FEATURE_LTQ_WAVE_500_PCIE=y
+# CONFIG_FEATURE_LTQ_WAVE_500 is not set
+CONFIG_FEATURE_LTQ_WAVE_AR10_SUPPORT=y
+# CONFIG_FEATURE_LTQ_WAVE_STA is not set
+# CONFIG_FEATURE_LTQ_WAVE_DEBUG_TFTP_BINS is not set
+# CONFIG_FEATURE_LTQ_WAVE_FGPA_DUMMY_PHY is not set
+CONFIG_FEATURE_LTQ_WAVE_500B=y
+####################
+
+# the options below this point is wrong but packages wont compile
+
+# CONFIG_PACKAGE_icwmp-curl is not set
+# CONFIG_PACKAGE_juci-icwmp is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libdatamodel is not set
+
+# CONFIG_TARGET_ROOTFS_INITRAMFS is not set
+# CONFIG_TARGET_ROOTFS_SQUASHFS is not set
+

iop/configs/target/intel_mips/speedport_smart3/config

@@ -0,0 +1,3 @@
+# temporary solution for kernel
+CONFIG_KERNEL_GIT_BRANCH="easy550_anywan_smart3board"
+CONFIG_KERNEL_GIT_COMMIT="58796d57c6da6bba984c781c05222349f7c2b655"

iop/configs/target/iopsys_brcm63xx_arm/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/dg400prime/config

@@ -0,0 +1,4 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_arm/eg400/config

@@ -0,0 +1,7 @@
+CONFIG_BCM_I2C=y
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y
+

iop/configs/target/iopsys_brcm63xx_arm/f104/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/f104w/config

@@ -0,0 +1,6 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_USE_DSL=y
+CONFIG_TARGET_DSL_GFAST=y

iop/configs/target/iopsys_brcm63xx_arm/sdx810_rg/config

@@ -0,0 +1,5 @@
+
+# Disable kernel internal Dect. External Dect can still operate.
+CONFIG_TARGET_NO_DECT=y
+
+CONFIG_TARGET_NO_DSL=y

iop/configs/target/iopsys_brcm63xx_mips/cg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/config

@@ -0,0 +1,15 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+
+# CONFIG_PACKAGE_juci-broadcom-wl is not set
+# CONFIG_PACKAGE_juci-minisnmpd is not set
+# CONFIG_PACKAGE_juci-router-openwrt is not set
+# CONFIG_PACKAGE_speedsvc is not set
+
+# CONFIG_juci_broadcom_wl is not set
+# CONFIG_juci_minisnmpd is not set
+# CONFIG_juci_router_openwrt is not set
+
+# CONFIG_PACKAGE_brcminfo is not set
+CONFIG_PACKAGE_brcm_fw_tool=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200/config

@@ -0,0 +1,3 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg200al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301/config

@@ -0,0 +1,2 @@
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/dg301al/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg200/config

@@ -0,0 +1,5 @@
+CONFIG_BCM_I2C=y
+CONFIG_TARGET_NO_DECT=y
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_ENDPOINT_MODULE=y
+

iop/configs/target/iopsys_brcm63xx_mips/eg300/config

@@ -0,0 +1,3 @@
+CONFIG_TARGET_NO_DSL=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_brcm63xx_mips/vg50/config

@@ -0,0 +1,4 @@
+CONFIG_TARGET_NO_DHD=y
+CONFIG_TARGET_NO_VOICE=y
+CONFIG_BCM_I2C=y
+

iop/configs/target/iopsys_ramips/config

@@ -0,0 +1,14 @@
+# CONFIG_PACKAGE_libcgroup-daemon is not set
+# CONFIG_PACKAGE_libcgroup is not set
+# CONFIG_PACKAGE_power-management is not set
+# CONFIG_PACKAGE_qos-scripts is not set
+# CONFIG_PACKAGE_mtd-utils-deubinize is not set
+# CONFIG_PACKAGE_mtd-utils-imagewrite is not set
+# CONFIG_PACKAGE_mtd-utils-mkfs.jffs2 is not set
+# CONFIG_PACKAGE_mtd-utils-nanddump is not set
+CONFIG_PACKAGE_mtd-utils-nandwrite=y
+CONFIG_PACKAGE_mtk-bndstrg=y
+CONFIG_PACKAGE_igmpproxy=y
+CONFIG_PACKAGE_kmod-nf-nathelper=y
+CONFIG_PACKAGE_kmod-nf-nathelper-extra=y
+# CONFIG_PACKAGE_endptmngr is not set

iop/iop.completion

@@ -34,8 +34,9 @@ _iop()
 
     iopcmds="bootstrap cfe_upgrade cfe_upgrade_latest extract_core \
              feeds_update genconfig generate_tarballs install_key \
-             scp_changes setup_host ssh_install_key status \
-             update_package update_feed_branches ssh_upgrade"
+             scp_changes setup_host ssh_install_key ssh_sysupgrade \
+             ssh_sysupgrade_latest ssh_sysupgrade_latest_w status \
+             update_package update_feed_branches"
 
     if [ $COMP_CWORD -eq 1 ] ; then
 
@@ -75,13 +76,7 @@ _iop()
                 fi
                 return 0
                 ;;
-            ssh_upgrade)
-	        if [ "$prev" == "-f" ] ; then
-		    _filedir
-		else
-		    COMPREPLY=( $(compgen -W "-f -t -i -n -x -b" -- ${cur}) )
-		fi
-	         ;;
+
             *)
                 # No arguments or arguments not supported yet
                 ;;

iop/scripts/auto_feeds_conf.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-
-declare -a feed_list
-function list_feeds {
-    jq '.feed[] | .name' feeds.conf
-}
-
-# Exported interface
-function auto_feeds_conf {
-    echo "Function auto feeds conf"
-    echo "feed list:"
-    list_feeds
-}
-
-register_command "auto_feeds_conf" "Automatically update feeds"

iop/scripts/genconfig.sh

@@ -7,7 +7,7 @@ function genconfig {
 	export FILEDIR="files/"
 	export THEMEDIR="themes"
 	CURRENT_CONFIG_FILE=".current_config_file"
-	export CONFIGPATH="package/feeds/iopsys/iop"
+	export CONFIGPATH="package/feeds/iopsys/iop/configs"
 	CUSTPATH="customerconfigs"
 	export CUSTCONF="customerconfigs/customers"
 	export VERBOSE=0
@@ -15,16 +15,17 @@ function genconfig {
 	LOCAL_MIRROR="http://mirror.inteno.se/mirror"
 
 	target="bogus"
-	config_path=""
+	masterconfig=1
 
 	# Takes a board name and returns the target name in global var $target
 	set_target() {
 	    local profile=$1
 
-	    local iopsys_brcm63xx_mips=$(cd target/linux/iopsys-brcm63xx-mips; ./genconfig)
-	    local iopsys_brcm63xx_arm=$(cd target/linux/iopsys-brcm63xx-arm; ./genconfig)
-	    local iopsys_ramips=$(cd target/linux/iopsys-ramips; ./genconfig)
-	    local intel_mips=$(cd target/linux/intel_mips; ./genconfig)
+	    local iopsys_brcm63xx_mips="cg300 cg301 dg150 dg150v2 dg150alv2 dg200 dg200al dg301 dg301al eg300 vg50 vox25 hpc_hu02 eg200"
+	    local iopsys_brcm63xx_arm="dg400 eg400 sdx810_rg f104w f104 dg400prime dg400primeb 963138REF_P502"
+	    local iopsys_ramips="ex400 sdx810_ap"
+	    local intel_mips="easy550 easy350 speedport_smart3"
+	    local ramips="mt7621"
 
 	    if [ "$profile" == "LIST" ]
 	    then
@@ -38,13 +39,13 @@ function genconfig {
 		done
 		return
 	    fi
-
+	    
+	    
 	    local targets
 
 	    for p in $iopsys_brcm63xx_mips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_mips"
-			config_path="target/linux/iopsys-brcm63xx-mips/config"
 		    return
 		fi
 	    done
@@ -52,7 +53,6 @@ function genconfig {
 	    for p in $iopsys_brcm63xx_arm; do
 		if [ $p == $profile ]; then
 		    target="iopsys_brcm63xx_arm"
-			config_path="target/linux/iopsys-brcm63xx-arm/config"
 		    return
 		fi
 	    done
@@ -60,7 +60,14 @@ function genconfig {
 	    for p in $iopsys_ramips; do
 		if [ $p == $profile ]; then
 		    target="iopsys_ramips"
-			config_path="target/linux/iopsys-ramips/config"
+		    return
+		fi
+	    done
+
+	    for p in $ramips; do
+		if [ $p == $profile ]; then
+		    target="ramips"
+		    masterconfig=0
 		    return
 		fi
 	    done
@@ -68,7 +75,6 @@ function genconfig {
 	    for p in $intel_mips; do
 		if [ $p == $profile ]; then
 		    target="intel_mips"
-			config_path="target/linux/intel_mips/config"
 		    return
 		fi
 	    done
@@ -104,16 +110,17 @@ function genconfig {
 
 	usage() {
 		echo
-		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer [customer2 ]...]"
+		echo 1>&2 "Usage: $0 [ OPTIONS ] < Board_Type > [ Customer ]"
 		echo
 		echo -e "  -c|--clean\tRemove all files under ./files and import from config "
 		echo -e "  -v|--verbose\tVerbose"
 		echo -e "  -n|--no-update\tDo NOT! Update customer config before applying"
+		echo -e "  -p|--profile\tSet profile (if exists) default juci"
 		echo -e "  -s|--override\tEnable 'Package source tree override'"
 		echo -e "  -h|--help\tShow this message"
 		echo -e "  -l|--list [customer]\tList all Customers or all boards for one customer"
 		echo -e "  -a|--list-all\tList all Customers and their board types"
-		echo -e "  -b|--boards\tList all board types"
+		echo -e "  -b|--boards\tList all board types"		
 		echo
 		echo "Example ./iop genconfig vg50 TELIA"
 		echo "(if no customerconfig is chosen the Inteno Config will be used)"
@@ -207,42 +214,62 @@ function genconfig {
 	create_and_copy_files()
 	{
 		local BOARDTYPE=$1
-		shift
-		local CUSTOMERS=$@
+		local CUSTOMER=$2
 
-		# Validate seleced board and customers
+		# Validate seleced board and customer
 		set_target $BOARDTYPE
 		if [ $target == "bogus" ]; then
 			echo "Hardware profile does not exist"
 			exit 1
-		elif [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
-					echo "Customer profile for '$CUSTOMER' does not exist"
+		elif [ -n "$CUSTOMER" ]; then
+			if [ ! -d "$CUSTCONF/$CUSTOMER/" ]; then
+				echo "Customer profile for '$CUSTOMER' does not exist"
+				exit 1
+			elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
+				echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
+				if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+					echo "Common profile configuration will be used"
+				else
 					exit 1
-				elif [ ! -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/" ]; then
-					echo "'$BOARDTYPE' board profile does not exist for customer '$CUSTOMER'"
-					if [ -f "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-						echo "Common profile configuration will be used"
-					else
-						exit 1
-					fi
 				fi
-			done
+			fi
 		fi
 
 		# Generate base config
+		# Used only for iopsys targets, not openwrt targets
 		rm -f .config
-		v "Config $BOARDTYPE selected"
-		v "cp $CONFIGPATH/config .config"
-		cp $CONFIGPATH/config .config
+		if [ $masterconfig -eq 1 ]; then
+			v "Config $BOARDTYPE selected"
+			v "cp $CONFIGPATH/config .config"
+			cp $CONFIGPATH/config .config
+		fi
 
-		if [ -f $config_path/config ]; then
-		    cat $config_path/config >> .config
+		# Add target (soc/board specific )
+		if [ -f $CONFIGPATH/target/config ]; then
+		    cat $CONFIGPATH/target/config >> .config
 		fi
-		if [ -f $config_path/$BOARDTYPE/config ]; then
-		    cat $config_path/$BOARDTYPE/config >> .config
+		if [ -f $CONFIGPATH/target/$target/config ]; then
+		    cat $CONFIGPATH/target/$target/config >> .config
 		fi
+		if [ -f $CONFIGPATH/target/$target/$BOARDTYPE/config ]; then
+		    cat $CONFIGPATH/target/$target/$BOARDTYPE/config >> .config
+		fi
+
+		# Apply profile diff to master config if selected
+		if [ -n "$PROFILE" ]; then
+			if [ -e "$CONFIGPATH/$PROFILE.diff" ]; then
+				cat $CONFIGPATH/$PROFILE.diff >> .config
+			elif [ "$PROFILE" == "juci" ]; then
+				v "Default profile (juci) is selected."
+			else
+				echo "ERROR: profile $PROFILE does not exist!"
+				exit 1
+			fi
+		else
+			v "No profile selected! Using default."
+		fi
+
+		# Set target and profile
 
 		#special handling for intel_mips which use TARGET_DEVICES
 		if [ "$target" = "intel_mips" ]; then
@@ -258,33 +285,31 @@ function genconfig {
 			echo "CONFIG_TARGET_${target}_${BOARDTYPE}=y" >> .config
 		fi
 
-		echo "$CUSTOMERS $BOARDTYPE" > $CURRENT_CONFIG_FILE
+		echo "$CUSTOMER $BOARDTYPE" > $CURRENT_CONFIG_FILE
 
 		# Add customerconfig diff if a customer is selected
-		if [ -n "$CUSTOMERS" ]; then
-			for CUSTOMER in $CUSTOMERS; do
-				if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
-					v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
-					cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
-				fi
-				if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
-					customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
-					v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
-					cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
-					cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
-				fi
-				if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
-					v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
-					cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
-				fi
-			done
+		if [ -n "$CUSTOMER" ]; then
+			if [ -d "$CUSTCONF/$CUSTOMER/common/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/common/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/$BOARDTYPE/fs" ]; then
+				v "cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR"
+				cp -ar $CUSTCONF/$CUSTOMER/$BOARDTYPE/fs/* $FILEDIR
+			fi
+			if [ -d "$CUSTCONF/$CUSTOMER/juci-theme" ]; then
+				customer="$(echo $CUSTOMER | tr 'A-Z' 'a-z')"
+				v "cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer"
+				cp -ar $CUSTCONF/$CUSTOMER/juci-theme $THEMEDIR/juci-theme-$customer
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/common/common.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/common/common.diff"
+				cat $CUSTCONF/$CUSTOMER/common/common.diff >> .config
+			fi
+			if [ -e "$CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff" ]; then
+				v "Apply $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff"
+				cat $CUSTCONF/$CUSTOMER/$BOARDTYPE/$BOARDTYPE.diff >> .config
+			fi
 		fi
 
 		# Set target version
@@ -326,11 +351,20 @@ function genconfig {
 		# currently boardparms.c and boardparms_voice.c is the only place that is depending on inteno boardid name
 		# so just touch that file.
 		[ -d ./build_dir ] && find build_dir/ -name "boardparms*c" -print0 2>/dev/null | xargs -0 touch 2>/dev/null
-
+				
 		# Set default values based on selected parameters
 		v "$(make defconfig 2>&1)"
 
-		echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		# Temporary fixup for juci/luci profile
+		if [ "$PROFILE" == "luci" ]; then
+			sed -i '/CONFIG_DEFAULT_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_juci/d' .config
+			sed -i '/CONFIG_PACKAGE_uhttpd/d' .config
+		fi
+
+		if [ $masterconfig -eq 1 ]; then
+			echo Set version to $(grep -w CONFIG_TARGET_VERSION .config | cut -d'=' -f2 | tr -d '"')
+		fi
 
 		# Clean base-file package to force rebuild when changing profile
 		v "$(make package/base-files/clean 2>&1)"
@@ -375,7 +409,7 @@ function genconfig {
 		CUSTREPO="${CUSTREPO:-git@private.inteno.se:customerconfigs}"
 
 		setup_dirs
-		create_and_copy_files "$@"
+		create_and_copy_files "$1" "$2"
 	fi
 }
 

iop/scripts/generate_tarballs.sh

@@ -14,7 +14,7 @@ build_bcmkernel_consumer() {
 	tarfile='out/bcm963xx_*_consumer.tar.gz'
 	[ $(ls -1 $tarfile |wc -l) -ne 1 ] && echo "Too many tar files: '$tarfile'" && return
 	scp -pv $tarfile $SERVER:$FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz
-	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver-latest"
+	ssh $SERVER "[ -f $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz ] && ln -sf $FPATH/bcmopen-$board-$bcmkernelcommith.tar.gz $FPATH/bcmopen-$board-$majver.$minver.tar.gz"
 	rm -f $tarfile
 	cd "$curdir"
 }

iop/scripts/iopupgrade.sh

@@ -1,326 +0,0 @@
-# this is a developer helper script to install firmware on a remote host with SSH
-
-function upd_usage {
-    echo "usage: $0 iopupgrade -t <host> -f <file> [opts] "
-    echo ""
-    echo "   Default host is 192.168.1.1"
-    echo "   Default firmware file is the newest one found"
-    echo "   Default is to not keep configuration"
-    echo "opts:"
-    echo ""
-    echo "	-i	Interactive use, Allows to select firmware file"
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-s	Use sysupgade. old upgrade method, needed for old releases that do not have iopu"
-}
-
-function set_config_string {
-    eval `grep $1 .config`
-}
-
-function upd_ask_ok {
-    echo "Will Continue with the following settings"
-    echo "-----------------------------------------"
-    printf "%20s: %s\n"  "Firmare file" "$upd_fw_base"
-    printf "%20s: %s\n"  "Host ip" "$upd_host"
-    printf "%20s: " "Reboot";               if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Keep config";          if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force bootloader";     if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Force image upgrade";  if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    printf "%20s: " "Use sysupgrade";       if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi
-    echo "-----------------------------------------"
-
-    if [ "$upd_sysupgrade" == "0" ]
-       then
-	   if [ "$upd_keepconf"   == "1" ] ;then echo "keeping config is just a fantasy it's not yet implemented, try sysupgrade";fi
-    fi
-
-    echo -n "Continue? [Y/n/q]:"
-    read answer
-
-    case $answer in
-	n|N)
-	    return 1;;
-	q|Q)
-	    exit 1;;
-	y|Y|*)
-	    return 0;;
-    esac
-}
-
-function upd_select_file {
-
-    dialog --keep-tite --title "To select file use TAB/ARROW to hilight then press SPACEBAR -> RETURN" \
-	   --fselect "bin/targets/$CONFIG_TARGET_BOARD/generic/" \
-	   $((lines -10)) $((cols -5)) \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_fw="$new_file"
-	upd_fw_base=$(basename $upd_fw);
-    fi
-}
-
-function upd_select_target {
-
-    dialog --keep-tite --title "Input the name/ip number of target board" \
-	   --inputbox "Name/IP" \
-	   $((lines -10)) $((cols -5)) \
-	   "$upd_host" \
-	   2> $tempfile
-
-    new_file=$(cat $tempfile)
-    if [ -n "$new_file" ]
-    then
-	upd_host="$new_file"
-    fi
-}
-
-
-function upd_select_reboot {
-    dialog --keep-tite --radiolist "Should the board reboot after download finished" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Reboot" "Restart board after done"       `if [ "$upd_noreboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "No reboot" "Continue running old system" `if [ "$upd_noreboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"No reboot")
-	    upd_noreboot=1
-	;;
-	"Reboot")
-	    upd_noreboot=0
-	    ;;
-    esac
-}
-
-function upd_select_config {
-    dialog --keep-tite --radiolist "Should the configuration be keept" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Keep" "Keep the config from old system"      `if [ "$upd_keepconf" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Default" "Use default config for new system" `if [ "$upd_keepconf" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Keep")
-	    upd_keepconf=1
-	    ;;
-	"Default")
-	    upd_keepconf=0
-	    ;;
-    esac
-}
-
-function upd_select_forceboot {
-    dialog --keep-tite --radiolist "Should the boot loader be updated reagardless of version installed" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Alwasy update boot loader"                `if [ "$upd_forceboot" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Version check" "Only upgrade if version is newer" `if [ "$upd_forceboot" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceboot=1
-	    ;;
-	"Version check")
-	    upd_forceboot=0
-	    ;;
-    esac
-}
-
-function upd_select_forceimage {
-    dialog --keep-tite --radiolist "Should the image be stored in flash even if sanity checks would reject it" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Force" "Dissable sanity check and force use of image (dangerous)" `if [ "$upd_forceimage" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "Only compatible" "Normal checks apply"                            `if [ "$upd_forceimage" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"Force")
-	    upd_forceimage=1
-	    ;;
-	"Only compatible")
-	    upd_forceimage=0
-	    ;;
-    esac
-}
-
-function upd_select_sysupgrade {
-    dialog --keep-tite --radiolist "Use the old way to upgrade a board" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "iopu" "Use the iop upgrade methode"          `if [ "$upd_sysupgrade" == "0" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   "sysupgrade" "Use the old sysupgrade methode" `if [ "$upd_sysupgrade" == "1" ] ;then echo "ON" ;else echo "OFF";fi` \
-	   2> $tempfile
-
-    res=$(cat $tempfile)
-    case $res in
-	"iopu")
-	    upd_sysupgrade=0
-	    ;;
-	"sysupgrade")
-	    upd_sysupgrade=1
-	    ;;
-    esac
-}
-
-function upd_select {
-
-    dialog --keep-tite --ok-label "Select" --cancel-label "Done" --menu "Select Item to change" \
-	   $((lines -5)) $((cols -5)) $((lines -5 -5)) \
-	   "Firmare file" "$upd_fw_base"\
-	   "Host ip" "$upd_host" \
-	   "Reboot"               `if [ "$upd_noreboot"   == "0" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Keep config"          `if [ "$upd_keepconf"   == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force bootloader"     `if [ "$upd_forceboot"  == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "Force image upgrade"  `if [ "$upd_forceimage" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   "sysupgrade"           `if [ "$upd_sysupgrade" == "1" ] ;then printf "Yes\n" ;else printf "No\n";fi` \
-	   2> $tempfile
-
-
-    case $(cat $tempfile) in
-	"Firmare file")
-	    upd_select_file
-	    ;;
-	"Host ip")
-	    upd_select_target
-	    ;;
-	"Reboot")
-	    upd_select_reboot
-	    ;;
-	"Keep config")
-	    upd_select_config
-	    ;;
-	"Force bootloader")
-	    upd_select_forceboot
-	    ;;
-	"Force image upgrade")
-	    upd_select_forceimage
-	    ;;
-	"sysupgrade")
-	    upd_select_sysupgrade
-	    ;;
-	*)
-	    return
-	;;
-    esac
-    upd_select
-}
-function upd_select_start {
-    lines=$(tput lines)
-    cols=$(tput cols)
-    tempfile=`tempfile 2>/dev/null` || tempfile=/tmp/test$$
-    trap "rm -f $tempfile" 0 1 2 5 15
-    upd_select
-
-}
-
-function ssh_upgrade {
-    upd_noreboot=0
-    upd_forceboot=0
-    upd_keepconf=0
-    upd_forceimage=0
-    upd_fw_base=""
-    upd_fw=""
-    upd_host="192.168.1.1"
-    upd_sysupgrade=0
-    do_dialog=0
-
-    while getopts "f:hnxt:iscb" opt; do
-	case $opt in
-	    n)
-		upd_noreboot=1
-		;;
-	    x)
-		upd_forceimage=1
-		;;
-	    b)
-		upd_forceboot=1
-		;;
-	    c)
-		upd_keepconf=1
-		;;
-	    v)
-		verbose=$OPTARG
-		;;
-	    f)
-		upd_fw=$OPTARG
-		;;
-	    t)
-		upd_host=$OPTARG
-		;;
-	    i)
-		do_dialog=1
-		;;
-	    s)
-		upd_sysupgrade=1
-		;;
-	    h)
-		upd_usage
-		exit 1
-		;;
-	    \?)
-		echo "Invalid option: -$OPTARG" >&2
-		exit 1
-		;;
-	esac
-    done
-
-    if [ -n "$upd_fw" ]
-    then
-	upd_fw_base=$(basename $upd_fw);
-    else
-	set_config_string CONFIG_TARGET_BOARD
-	firmwares=$(cd bin/targets/$CONFIG_TARGET_BOARD/generic/; ls -t *[0-9].y[3])
-
-	for upd_fw_base in $firmwares
-	do
-	    #echo "firmware $upd_fw"
-	    break
-	done
-	upd_fw="bin/targets/$CONFIG_TARGET_BOARD/generic/$upd_fw_base"
-    fi
-
-    [ $do_dialog -eq 1 ] && upd_select_start
-
-    if ! upd_ask_ok
-    then
-	upd_select_start
-	if ! upd_ask_ok
-	then
-	    exit 1
-	fi
-    fi
-
-    if [ ! -f $upd_fw ]
-    then
-	echo "firmware file $firmware do not exist"
-	exit 1
-    fi
-
-    if [ $upd_sysupgrade -eq 0 ]
-    then
-	extra_args=""
-	[ $upd_noreboot   -eq 1 ] && extra_args="$extra_args -n"
-	[ $upd_forceimage -eq 1 ] && extra_args="$extra_args -x"
-	[ $upd_forceboot  -eq 1 ] && extra_args="$extra_args -b"
-
-	file_size_kb=`du -k "$upd_fw" | cut -f1`
-	cat $upd_fw | pv -s ${file_size_kb}k | ssh root@$upd_host "iopu $extra_args"
-    else
-	scp $upd_fw root@$upd_host:/tmp/ &&
-	    ssh -o ConnectTimeout=60 root@$upd_host "sysupgrade -v $3 /tmp/$upd_fw_base" &&
-	    echo "sysupgrade done!"
-    fi
-}
-
-register_command "ssh_upgrade" "-h <host> -f <file> [opts]  Install firmware on remote host with SSH"
-
-

iop/scripts/ssh_sysupgrade.sh

@@ -0,0 +1,56 @@
+# this is a developer helper script to install firmware on a remote host with SSH
+
+function usage {
+	echo "usage: $0 ssh_sysupgrade <host> <file> [opts]"
+}
+
+function ssh_sysupgrade {
+	if [ -z "$1" ] ; then
+		usage
+		echo "Error: host required"
+		exit 1
+	fi
+	if [ -z "$2" ] ; then
+		usage
+		echo "Error: firmware filename required"
+		exit 1
+	fi
+	if [ ! -e $2 ] ; then
+		usage
+		echo "Error: firmware file does not exist"
+		exit 1
+	fi
+	IMAGE=`basename $2`
+	echo "sysupgrade host: $1 with file $IMAGE"
+	[ "$2" ] && [ -e "$2" ] && scp $2 root@$1:/tmp/ && ssh -o ConnectTimeout=60 root@$1 "sysupgrade -v $3 /tmp/$IMAGE" && echo "sysupgrade done!"
+}
+
+register_command "ssh_sysupgrade" "<host> <file> [opts]  Install firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*/*/*.y[23] | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest" "<host> [opts]  Install latest ubifs firmware on remote host with SSH"
+
+function ssh_sysupgrade_latest_w {
+	if [ -z "$1" ] ; then
+		echo "usage: $0 ssh_sysupgrade_latest_w <host> [opts]"
+		echo "Error: host required"
+		exit 1
+	fi
+	{ cd `dirname $0`
+		IMAGE=`ls -Art bin/*/*.w | tail -n1`
+		[ "$IMAGE" ] && [ -e "$IMAGE" ] && ./iop ssh_sysupgrade $1 $IMAGE $2
+	}
+}
+
+register_command "ssh_sysupgrade_latest_w" "<host> [opts]  Install latest jffs2 firmware on remote host with SSH"

iop/scripts/update_feed_branches.sh

@@ -36,13 +36,13 @@ function update_feed_branches {
 		echo "Updating release branch $release to specific commit hash given in feeds.conf for each feed repo"
 	fi
 
-	ifeeds="$(grep -r 'dev.iopsys.eu' feeds.conf | awk '{print$2}' | tr '\n' ' ')"
+	ifeeds="$(grep -r feed_inteno feeds.conf  | awk '{print$2}' | cut -d'_' -f3 | tr '\n' ' ')"
 
 	for f in $ifeeds; do
-		commith=$(grep $f feeds.conf | cut -d'^' -f2)
-		cd $ipath/feeds/$f
+		commith=$(grep feed_inteno_$f feeds.conf | cut -d'^' -f2)
+		cd $ipath/feeds/feed_inteno_$f
 		git branch -D $release 2>/dev/null
-		echo "$f: updating release branch $release to commit $commith"
+		echo "feed_inteno_$f: updating release branch $release to commit $commith"
 		git checkout $commith
 		git push origin :$release
 		git checkout -b $release

iop/scripts/update_package.sh

@@ -496,7 +496,6 @@ check_feeds()
     for feed in `echo $feeds`
     do
 		feed_hash=$(feeds_hash $feed)
-		[ -n "$feed_hash" ] || continue
 		if [ -d feeds/$feed ]; then
 			in_git=$(cd feeds/$feed; git rev-parse HEAD)
 

iopupgrade/Makefile

@@ -1,55 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=iopupgrade
-PKG_VERSION:=1.0.0
-PKG_RELEASE:=1
-
-PKG_SOURCE_VERSION:=9b5ed4bc9f7ac5064414cf5feb510ffd95df6ec4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/iopupgrade
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_RELEASE)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-# support parallel build
-PKG_BUILD_PARALLEL:=1
-
-#re create configure scripts if not present.
-PKG_FIXUP:=autoreconf
-
-# run install target when cross compiling. basically, make install DESTDIR=$(PKG_INSTALL_DIR)
-# this way we don't need to pick out the resulting files from the build dir.
-PKG_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/iopupgrade
-	CATEGORY:=Utilities
-	TITLE:=Iopsys system upgrade utility
-	URL:=
-#	DEPENDS:=
-endef
-
-define Package/iopupgrade/description
-	Application handling peripheral
-endef
-
-define Package/iopupgrade/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/etc/
-	$(INSTALL_DIR) $(1)/etc/init.d/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iopupgrade $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,iopupgrade))
- 

iopupgrade/files/sbin/iopu

@@ -1,277 +0,0 @@
-#!/bin/sh
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-cur_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, currently used
-upd_vol=""	# num,[0/1]	Number used for ubifs root filesystem volume name.
-		# eg: rootfs_0 or rootfs_1, the one we want to update
-cmdline=""	# command line settings.
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-chroot_cmdline=""	# command line for the iop_chroot command.
-board=""		# string, Board name that is going to be matched
-			# against header of firmware image
-upd_ubi_id=""		# num,	UBI volume number for the volume name
-			# "rootfs_$upd_vol", use to know what volume to run
-			# ubiupdatevol on.
-run_cleanup=0		# if set the cleanup should be run otherwise we skip it.
-run_mount_cleanup=0	# set if we should run umount in cleanup
-upd_kernel=0		# set to 1 if system has the kernel in own mtd partition
-upd_cfe=0		# set to 1 if system is using cfe as bootloader.
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-upd_noreboot=0		# set to 1 if we should not reboot after programming
-upd_forceimage=0	# set this to force upgrade even if image is for wrong board.
-upd_forceboot=0		# set this to force upgrade of boot loader
-###############################################################################
-# import external functions
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-
-###############################################################################
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/tmp/upd_log
-}
-
-# we need to handle ctrl-c, segmentation fault, sigpipe and other abnormal
-# terminations. no printing to stdout/stderr allowed in this function or
-# anyhting it calls as stdout/stderr might no longer exist
-function finish {
-
-    if [ "$run_cleanup" == "1" ]
-    then
-
-	function_call upd_cleanup
-	log ""
-    fi
-
-    if [ "$run_mount_cleanup" == "1" ]
-    then
-	log "Cleaning up after mount"
-	umount_newroot
-    fi
-    # always kill the timeout process, will leave the sleep but that is harmless
-    # as long as the kill will nerver be run.
-    kill $TIMEOUT_PID 2>/dev/null
-
-    lock -u /tmp/iopu.lock
-}
-
-function sig_pipe {
-    log_stdout=0  # stdin,stdout,stderr do not exist anymore
-    log "Got sigpipe. Turning of log printing to stdout"
-}
-
-# if a timout happens terminate
-function timeout {
-    finish
-    exit 1
-}
-
-# Not much that can be done if the mount fails but to try again.
-# if after 10 seconds there still is errors abort program.
-# UBIFS has some wierd time intervall after ubiupdatevol where
-# a mount of the newly written data results in a busy error.
-function mount_retry {
-    local tries=0
-
-    while [ $tries -lt 10 ]
-    do
-	if mount $@ 2>/dev/null
-	then
-	    return
-	fi
-	tries=$((tries + 1))
-	sleep 1
-    done
-
-    log "mount failed for command [mount $@] so upgrade failed."
-
-    exit 1
-}
-
-function mount_newroot {
-    run_mount_cleanup=1
-    mkdir -p /tmp/newroot
-    mkdir -p /tmp/newroot_overlay
-
-    mount_retry -t ubifs ubi0:rootfs_$upd_vol /tmp/newroot
-
-    mount_retry -o noatime,lowerdir=/tmp/newroot,upperdir=/tmp/newroot/overlay,workdir=/tmp/newroot/lib/overlay.tmp -t overlay "overlayfs:/tmp/newroot/overlay" /tmp/newroot_overlay
-    mount_retry --bind /tmp/newroot/ /tmp/newroot_overlay/rom
-
-    mount_retry --bind /dev /tmp/newroot_overlay/dev
-    mount_retry --bind /proc /tmp/newroot_overlay/proc
-    mount_retry --bind /sys /tmp/newroot_overlay/sys
-    mount_retry -t tmpfs -o noatime,mode=0755 root /tmp/newroot_overlay/tmp
-
-    mkdir -p /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind / /tmp/newroot_overlay/tmp/oldroot
-    mount_retry --bind /tmp /tmp/newroot_overlay/tmp/oldroot/tmp
-}
-
-function umount_newroot {
-    umount /tmp/newroot_overlay/tmp/oldroot/tmp
-    umount /tmp/newroot_overlay/tmp/oldroot
-    umount /tmp/newroot_overlay/tmp
-    umount /tmp/newroot_overlay/sys
-    umount /tmp/newroot_overlay/proc
-    umount /tmp/newroot_overlay/dev
-    umount /tmp/newroot_overlay/rom
-    umount /tmp/newroot_overlay
-    umount /tmp/newroot
-    run_mount_cleanup=0
-}
-
-function usage {
-    echo "usage: $0 iopu [opts] "
-    echo ""
-    echo "opts:"
-    echo ""
-    echo "	-n	Do not do the final reboot of the target board"
-    echo "	-c	Keep configuration"
-    echo "	-x	Force install even if firmware is not for this board"
-    echo "	-b	Force install of bootloader regardless of version installed"
-    echo "	-r	Jump into chroot env of other system"
-}
-
-###############################################################################
-
-# just one instance
-# this check has to be done before we install handler to avoid removing the
-# lock even if it was not available.
-if  ! lock -n /tmp/iopu.lock
-then
-    echo "Another instance of iopu already running"
-    echo "If you are sure this is wrong remove file /tmp/iopu.lock"
-    exit 1
-fi
-
-trap finish EXIT
-trap timeout SIGALRM
-trap sig_pipe SIGPIPE
-
-while getopts "nrxb" opt; do
-    case $opt in
-	n)
-	    upd_noreboot=1
-	    ;;
-	x)
-	    upd_forceimage=1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	r)
-	    upd_vol=$(get_flashbank_next)
-	    mount_newroot
-	    (ENV=/sbin/iopu_chroot_env chroot /tmp/newroot_overlay /bin/sh)
-	    echo ""
-	    umount_newroot
-	    exit 0
-	    ;;
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-    esac
-done
-
-# put a timeout on this if it takes longer than 120 seconds we should abort
-# and clean up
-(
-sleep 120	# if 2 minutes pass
-kill -ALRM $$	2>/dev/null # send it a SIGALRM signal
-)&
-TIMEOUT_PID=$!
-
-log "Firmware upgrade started"
-
-# Should board name be checked
-if [ $upd_forceimage -eq 0 ]
-then
-   board=$(db get hw.board.iopVerBoard)
-   cmdline="$cmdline -b $board"
-else
-    cmdline="$cmdline -q"
-fi
-
-# find out what rootfs volume is active. 
-cur_vol=$(get_flashbank_current)
-upd_vol=$(get_flashbank_next)
-
-# convert volume name "rootfs_$upd_vol" into ubifs volume id
-upd_ubi_id=$(ubinfo -d 0 -N rootfs_$upd_vol | awk "/Volume ID:/ {print \$3}")
-log "installing Root Fileystem into UBI volume rootfs_$upd_vol"
-
-# prepare to update CFE if it exists
-function_call upd_conf_cfe
-
-# prepare to update kernel if it is stored in MTD/JFFS2 
-function_call upd_conf_kernel
-
-log "now starting writing data to flash with [ iopupgrade $cmdline -u ubi0_$upd_ubi_id ]"
-run_cleanup=1	# When we start to actually write data there might be some
-		# things that need cleanup if we get an error/crash
-iopupgrade $cmdline -u ubi0_$upd_ubi_id
-
-# in case of any error we abort
-if [ $? -ne 0 ]; then
-    log "iopupgrade program Failed"
-    exit 1
-fi
-
-log "Firmware programmed to flash."
-
-
-log "Transfering configuration to new system."
-
-# Force upgrade of boot loader
-[ $upd_forceboot -eq 1 ] && chroot_cmdline="$chroot_cmdline -b"
-
-mount_newroot
-chroot /tmp/newroot_overlay /sbin/iopu_chroot $chroot_cmdline
-umount_newroot
-
-log "Update fully installed."
-run_cleanup=0
-
-# Now make sure that we actually boot the new system on the next reboot
-upd_finnish
-
-# spawn the reboot to a subshell to allow the main program to quit before reset
-# to avoid any hanged network connection like ssh
-if [ $upd_noreboot -eq 0 ]
-then
-    (
-	log_stdout=0	# stdin,stdout,stderr do not exist anymore, we are in a
-			# subshell and then the trap is no longer working.
-	sleep 1
-	log "Rebooting NOW!!!"
-	log ""
-	reboot
-    )&
-    log "Reboot initiated"
-else
-    log "Skipping reboot"
-fi
-
-
-
-
-
-
-

iopupgrade/files/sbin/iopu_chroot

@@ -1,61 +0,0 @@
-#!/bin/sh
-#
-# This program is intended to be run in a chroot environment where the old system
-# is mounted in /tmp/oldroot
-#
-
-
-###############################################################################
-# Global variables. can be used directly in any function called.
-
-
-###############################################################################
-# file local variables. should not be used in imported functions. Can be used
-# by functions declared in this script
-upd_forceboot=0
-log_stdout=1		# set to 0 to prevent the log to also print to stdout
-
-###############################################################################
-# import external functions
-
-source /lib/upgrade/iopsys.sh
-[ -f /lib/upgrade/iopupgrade ] && source /lib/upgrade/iopupgrade
-
-
-# only call function if it exists
-function_call() {
-    if type "$1" 2>/dev/null >/dev/null
-    then
-	$1 $@
-    fi
-}
-# Cleanup and error handling functions.
-function log {
-    TIME=$(date)
-    [ $log_stdout -eq 1 ] && echo "$@"
-    echo "[$TIME] $@" >>/root/upd_log
-}
-
-
-while getopts "hb" opt; do
-    case $opt in
-	h)
-	    upd_usage
-	    exit 1
-	    ;;
-	b)
-	    upd_forceboot=1
-	    ;;
-	\?)
-	    echo "Invalid option: -$OPTARG" >&2
-	    exit 1
-	    ;;
-    esac
-done
-
-# copy old install log over
-cp /tmp/oldroot/tmp/upd_log /root/upd_log
-
-# Upgrade boot loader if needed.
-function_call upd_program_boot
-

iopupgrade/files/sbin/iopu_chroot_env

@@ -1,18 +0,0 @@
-#!/bin/sh
-# this is run when "iopr -r" is executed.
-# intended to just show what environment is actually started.
-
-cat /etc/banner
-
-echo "/tmp/oldroot:"
-echo "	Contains the running root filesystem. It is live so files are in use"
-echo "	Anything copying/reading files from there needs to make sure it is done safely."
-echo ""
-
-Color_Off='\033[0m'       # Text Reset
-Red='\033[0;31m'          # Red
-
-PS1="${Red}chroot_new${Color_Off}:\w\#"
-export PS1
-export Red
-export Color_Off

libjwt/Makefile

@@ -1,52 +0,0 @@
-
-# Copyright (C) 2018 Iopsys
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libjwt
-PKG_VERSION:=1.0.0
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=866607c7741421c8ac99876e7201eb32d9af1b92
-PKG_SOURCE_URL:=https://github.com/benmcollins/libjwt.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)_$(PKG_SOURCE_VERSION).tar.xz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-PKG_FIXUP:=autoreconf
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/libjwt
-  CATEGORY:=Libraries
-  DEPENDS:=+libopenssl +jansson
-  TITLE:= libjwt
-endef
-
-
-#TARGET_CFLAGS += \
-#	-I$(STAGING_DIR)/usr/include
-#	-I$(STAGING_DIR)/usr/include/libnl3
-
-#MAKE_FLAGS += \
-#	CFLAGS="$(TARGET_CFLAGS)" \
-#	LDFLAGS="$(TARGET_LDFLAGS)" \
-#	FPIC="$(FPIC)" \
-#	PLATFORM="$(TARGET_PLATFORM)" \
-#	subdirs="$(subdirs)"
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/include/jwt.h $(1)/usr/include/
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-define Package/libjwt/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_BUILD_DIR)/libjwt/.libs/libjwt.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,libjwt))

mqtt-ciotc/Makefile

@@ -1,37 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=mqtt-ciotc
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=00da3fb1f1691d836037dc4d93e38d0835ba46a4
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifilife-testbed.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/mqtt-ciotc
-	CATEGORY:=Utilities
-	DEPENDS:=+libjwt +lib-paho-mqtt +libopenssl +libubox +ubus +libblobmsg-json
-	TITLE:=mqtt google iot clinet
-endef
-
-define Package/mqtt-ciotc/description
-	mqtt google iot client
-endef
-
-define Package/mqtt-ciotc/install
-	$(CP) ./files/* $(1)/
-	$(INSTALL_DIR) $(1)/sbin
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/mqtt_ciotc $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,mqtt-ciotc))

mqtt-ciotc/files/etc/config/mqtt_ciotc

@@ -1,3 +0,0 @@
-config certs 'certs'
-	option private '/etc/mqtt-ciotc/rsa_private.pem'
-	option root '/etc/mqtt-ciotc/roots.pem'

mqtt-ciotc/files/etc/init.d/mqtt_ciotc

@@ -1,35 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=96
-STOP=10
-PROG=/sbin/mqtt_ciotc
-
-USE_PROCD=1
-
-start_service() {
-	procd_open_instance
-	procd_set_param command ${PROG}
-	config_load mqtt_ciotc
-	config_get private certs private
-	config_get root certs root
-
-	[ -n $private ] && procd_append_param command --private-cert $private
-	[ -n $root ] && procd_append_param command --root-cert $root
-	procd_set_param respawn
-	procd_close_instance
-}
-
-stop_service()
-{
-	service_stop ${PROG}
-}
-
-reload_service() {
-#	procd_send_signal wifilife # use SIGHUP
-	stop
-	start
-}
-
-service_triggers() {
-        procd_add_reload_trigger "mqtt_ciotc"
-}

netmode/Makefile

@@ -3,7 +3,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=netmode
 PKG_VERSION:=0.2.0
 
-PKG_SOURCE_VERSION:=9fa23664b3bdd963e4556f5921c9f9be1c9c578f
+PKG_SOURCE_VERSION:=82fd6c196a3b990e105cef867a69ce52979b27fa
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/netmoded
 

netmode/files/etc/netmodes/bridged/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/post/apply_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if wet in wireless config and SSID nad KEY was saved for it, apply to config
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_json()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	json_load "$(cat /tmp/netmodecfg)" 2> /dev/null
-	json_get_var ssid ssid
-	json_get_var key key
-	json_get_var encryption encryption
-	json_get_var connect_bssid connect_bssid
-
-	uci -q set wireless.$1.key="$key"
-	uci -q set wireless.$1.encryption="$encryption"
-	uci -q set wireless.$1.ssid="$ssid"
-	uci -q set wireless.$1.connect_bssid="$connect_bssid"
-	uci commit wireless
-}
-
-apply_wet_cfg()
-{
-	[ -f /tmp/netmodecfg ] || return
-
-	config_load wireless
-	config_foreach parse_wet_json "wifi-iface"
-
-	rm /tmp/netmodecfg 2> /dev/null
-}
-
-apply_wet_cfg

netmode/files/etc/netmodes/repeater_mtk_5g_up_dual_down/scripts/pre/save_wet_cfg.sh

@@ -1,38 +0,0 @@
-#if mode wet in wireless config has SSID Key, save them
-#!/bin/sh
-
-. /usr/share/libubox/jshn.sh
-. /lib/functions.sh
-
-parse_wet_cfg()
-{
-	local interface=$1
-	local mode key encryption ssid connect_bssid
-
-	config_get mode $interface mode
-	[ "$mode" = "wet" ] || return
-
-	config_get ssid $interface ssid
-	config_get key $interface key
-	config_get encryption $interface encryption
-	config_get connect_bssid $interface connect_bssid
-
-	[ -n "$key" ] || return
-	[ -n "$encryption" ] || return
-
-	json_init
-	json_add_string "ssid" "$ssid"
-	json_add_string "key" "$key"
-	json_add_string "encryption" "$encryption"
-	json_add_string "connect_bssid" "$connect_bssid"
-
-	echo "`json_dump`" > /tmp/netmodecfg
-}
-
-save_wet_cfg()
-{
-	config_load wireless
-	config_foreach parse_wet_cfg "wifi-iface"
-}
-
-save_wet_cfg

netmode/files/etc/netmodes/routed_brcm/wireless

@@ -18,7 +18,7 @@ config wifi-device 'wl0'
 	option bandwidth '80'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'
@@ -60,7 +60,7 @@ config wifi-device 'wl1'
 	option bandwidth '20'
 	option hwmode 'auto'
 	option channel 'auto'
-	option scantimer '60'
+	option scantimer '15'
 	option wmm '1'
 	option wmm_noack '0'
 	option wmm_apsd '1'

netmode/files/etc/netmodes/routed_mtk/wireless

@@ -18,7 +18,6 @@ config wifi-device  ra0
 	option hwmode   auto
 	option htmode   HT20
 	option country 'DE'
-	option scantimer '60'
 
 config wifi-iface
 	option device   ra0
@@ -38,7 +37,6 @@ config wifi-device  rai0
 	option htmode   VHT80
 	option country 'DE'
 	option beamforming 1
-	option scantimer '60'
 
 config wifi-iface
 	option device   rai0

netmode/files/lib/functions/netmode.sh

@@ -180,7 +180,6 @@ switch_netmode() {
 	run_netmode_scripts $curmode "pre"
 
 	logger -s -p user.info -t $0 "[netmode] Copying /etc/netmodes/$curmode in /etc/config" >/dev/console
-
 	for file in $(ls /etc/netmodes/$curmode/); do
 		case "$file" in
 			DETAILS|scripts) continue ;;
@@ -189,9 +188,6 @@ switch_netmode() {
 	done
 	sync
 
-	#commit owsd to reload all init.d scripts dependent on its config
-	ubus call uci commit '{"config":"owsd"}'
-
 	local reboot=$(uci -q get netmode.$curmode.reboot)
 
 	if [ "$reboot" != "0" ]; then
@@ -386,9 +382,7 @@ populate_netmodes() {
 			if json_select acl; then
 				_i=1
 				while json_get_var user $_i; do
-					uci del_list netmode.$mode._access_r="$user"
 					uci del_list netmode.$mode._access_w="$user"
-					uci add_list netmode.$mode._access_r="$user"
 					uci add_list netmode.$mode._access_w="$user"
 					_i=$((_i+1))
 				done

owsd/Makefile

@@ -10,7 +10,7 @@ PKG_RELEASE:=1
 
 PKG_SOURCE_PROTO=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/owsd.git
-PKG_SOURCE_VERSION:=f0eedeb6fd061edf3784d6bf86fa60b176bf3fe7
+PKG_SOURCE_VERSION:=b3f52463a50d56af80bfd8b3f63960885379f150
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_SOURCE_SUBDIR:=${PKG_NAME}-${PKG_VERSION}
 PKG_MAINTAINER:=Sartura Support for Inteno <support-inteno@sartura.hr>

owsd/files/owsd.init

@@ -308,10 +308,10 @@ start_service() {
 	procd_close_instance
 }
 
-#stop_service()
-#{
-#	service_stop ${PROG}
-#}
+stop_service()
+{
+	service_stop ${PROG}
+}
 
 reload_service() {
         stop

paho-mqtt-c/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2013 Inteno
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=lib-paho-mqtt
-PKG_VERSION:=0.1
-
-PKG_SOURCE_VERSION:=9f715d0862a8e16099b5837c4e53a1bf6a6a0675
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/eclipse/paho.mqtt.c.git
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
-PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/lib-paho-mqtt
-	CATEGORY:=Libraries
-	DEPENDS:=+libopenssl
-	TITLE:=package for mqtt stuff
-endef
-
-
-define Package/lib-paho-mqtt/description
-	a library
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ $(1)/usr/lib
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/src/*.h $(1)/usr/include/
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-define	Package/lib-paho-mqtt/install
-	$(INSTALL_DIR) $(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_BUILD_DIR)/build/output/*.so* $(1)/usr/lib/
-endef
-
-$(eval $(call BuildPackage,lib-paho-mqtt))

peripheral_manager/Makefile

@@ -12,7 +12,7 @@ PKG_NAME:=peripheral_manager
 PKG_VERSION:=1.0.0
 PKG_RELEASE:=1
 
-PKG_SOURCE_VERSION:=02903ce5b594420331f80c6973fa3635921d7080
+PKG_SOURCE_VERSION:=fe43108d986a02d3a14f079d58bfa666c1089471
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/peripheral-manager
 

questd/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=questd
 PKG_VERSION:=3.1.40
 
-PKG_SOURCE_VERSION:=9edeefb6942c1a806a82274d124d8889bfb4f8e7
+PKG_SOURCE_VERSION:=7a0a7427d339736e3ee555e816d40c985651632c
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/questd
 

samba3/files/samba.init

@@ -11,11 +11,6 @@ useradd()
 	local password
 	config_get user $1 user
 	config_get password $1 password
-
-        filter="0A;5C 6E"
-        [ "$(hex_filter "$user" "$filter" 1)" = "" ] || return
-        [ "$(hex_filter "$password" "$filter" 1)" = "" ] || return
-
 	if ! $(grep -rq "^$user:" /etc/passwd) ; then
 		echo "adding user $user"
 		adduser $user -s /bin/false -D -H -h /mnt/$user -g "samba,pass=$password" && smbpasswd $user $password
@@ -56,30 +51,6 @@ purgepasswd()
 	done
 }
 
-hex_filter() {
-	local string=$1
-	local hex_chars=$2
-	local wc_max=$3
-	local wc_tot=0
-
-	if [ -z "$string" -o -z "$hex_chars" -o -z "$wc_max" ]
-	then
-		return;
-	fi
-
-	dump=$(echo "$string" | hexdump -v -e '32/1 "%02X ""\n"')
-
-	IFS=';'
-	for i in $hex_chars;
-	do
-		local wc
-		wc=$(echo "$dump" | grep -o "$i" | wc -w)
-		wc_tot=$((wc_tot+wc))
-	done
-
-	[ $wc_tot -gt $wc_max ] && echo "corrupt"
-}
-
 smb_header() {
 	local interface
 	config_get interface $1 interface
@@ -109,12 +80,11 @@ smb_header() {
 	config_get description $1 description "Samba on ${hostname:-OpenWrt}"
 	config_get charset     $1 charset     "UTF-8"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$workgroup" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$description" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$interfaces" "$filter" 1)" = "" ] || exit
-	[ "$(hex_filter "$charset" "$filter" 1)" = "" ] || exit
+	name=`echo -e "$name" | head -1`
+	workgroup=`echo -e "$workgroup" | head -1`
+	description=`echo -e "$description" | head -1`
+	interfaces=`echo -e "$interfaces" | head -1`
+	charset=`echo -e "$charset" | head -1`
 
 	mkdir -p /var/etc
 	sed -e "s#|NAME|#$name#g" \
@@ -174,22 +144,13 @@ smb_add_share() {
 	path=$(readlink -f $path)
 	[ "${path:0:4}" == "/mnt" ] || path="/mnt/"
 
-	filter="0A;5C 6E"
-	[ "$(hex_filter "$name" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$users" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$read_only" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$guest_ok" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$create_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$dir_mask" "$filter" 1)" = "" ] || return
-	[ "$(hex_filter "$browseable" "$filter" 1)" = "" ] || return
-
-	echo -e "\n[$name]\n\tpath = $path" >> /var/etc/smb.conf
-	[ -n "$users" ] && echo -e "\tvalid users = $users" >> /var/etc/smb.conf
-	[ -n "$read_only" ] && echo -e "\tread only = $read_only" >> /var/etc/smb.conf
-	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" >> /var/etc/smb.conf
-	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" >> /var/etc/smb.conf
-	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" >> /var/etc/smb.conf
-	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" >> /var/etc/smb.conf
+	echo -e "\n[$name]\n\tpath = ${path%%\\n*}" >> /var/etc/smb.conf
+	[ -n "$users" ] && echo -e "\tvalid users = $users" | head -1 >> /var/etc/smb.conf
+	[ -n "$read_only" ] && echo -e "\tread only = $read_only" | head -1 >> /var/etc/smb.conf
+	[ -n "$guest_ok" ] && echo -e "\tguest ok = $guest_ok" | head -1 >> /var/etc/smb.conf
+	[ -n "$create_mask" ] && echo -e "\tcreate mask = $create_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$dir_mask" ] && echo -e "\tdirectory mask = $dir_mask" | head -1 >> /var/etc/smb.conf
+	[ -n "$browseable" ] && echo -e "\tbrowseable = $browseable" | head -1 >> /var/etc/smb.conf
 }
 
 start_service() {

syslog-ng3/Makefile

@@ -0,0 +1,72 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=syslog-ng
+PKG_VERSION:=3.0.5
+PKG_RELEASE:=5
+
+PKG_SOURCE_URL:=http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/$(PKG_VERSION)/source/
+PKG_SOURCE:=$(PKG_NAME)_$(PKG_VERSION).tar.gz
+PKG_MD5SUM:=28f0d9ff2243b330e8cd6311ef9b2f12
+
+PKG_CONFIG_DEPENDS:= \
+	CONFIG_IPV6 \
+
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/nls.mk
+
+define Package/syslog-ng3
+  SECTION:=admin
+  CATEGORY:=Administration
+  DEPENDS:=+libpcre +glib2 +libeventlog +libopenssl +libwrap +libpthread +librt +zlib +libdbi
+  TITLE:=A powerful syslog daemon
+  URL:=http://www.balabit.com/network-security/syslog-ng/opensource-logging-system/
+endef
+
+define Package/syslog-ng3/description
+  syslog-ng reads and logs messages to the system console, log
+  files, other machines and/or users as specified by its
+  configuration file.
+endef
+
+define Package/syslog-ng3/conffiles
+/etc/syslog-ng.conf
+endef
+
+define Build/Configure
+	$(SED) 's,-I/usr/include,,' $(PKG_BUILD_DIR)/configure
+	$(Build/Configure/Default)
+endef
+
+CONFIGURE_ARGS +=  \
+	$(call autoconf_bool,CONFIG_IPV6,ipv6) \
+	--disable-dependency-tracking \
+	--enable-tcp-wrapper \
+	--disable-glibtest \
+	--disable-spoof-source \
+	--disable-sql \
+	--enable-prce \
+	--disable-linux-caps \
+
+TARGET_CPPFLAGS += \
+	-I$(STAGING_DIR)/usr/include/eventlog
+
+CONFIGURE_VARS += \
+	LIBDBI_CFLAGS="-I$(STAGING_DIR)/usr/include"
+
+define Package/syslog-ng3/install
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/syslog-ng $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/syslog-ng.init $(1)/etc/init.d/syslog-ng
+	$(INSTALL_DIR) $(1)/etc
+	$(INSTALL_DATA) ./files/syslog-ng.conf $(1)/etc
+endef
+
+$(eval $(call BuildPackage,syslog-ng3))

syslog-ng3/files/syslog-ng.conf

@@ -0,0 +1,37 @@
+@version:3.0
+
+options {
+	chain_hostnames(no);
+	create_dirs(yes);
+	flush_lines(0);
+	keep_hostname(yes);
+	log_fifo_size(256);
+	log_msg_size(1024);
+	stats_freq(0);
+	flush_lines(0);
+	use_fqdn(no);
+};
+
+source src {
+	internal();
+	unix-stream("/dev/log");
+};
+
+source net {
+	udp(ip(0.0.0.0) port(514));
+};
+
+source kernel {
+        file("/proc/kmsg" program_override("kernel"));
+};
+
+destination messages {
+	file("/var/log/messages");
+};
+
+log {
+	source(src);
+	source(net);
+        source(kernel);
+	destination(messages);
+};

syslog-ng3/files/syslog-ng.init

@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=50
+
+SERVICE_USE_PID=1
+
+start() {
+	[ -f /etc/syslog-ng.conf ] || return 1
+	service_start /usr/sbin/syslog-ng
+}
+
+stop() {
+	service_stop /usr/sbin/syslog-ng
+}
+
+reload() {
+	service_reload /usr/sbin/syslog-ng
+}

syslog-ng3/patches/001-fix-libconv_so_2-not-found-error

@@ -0,0 +1,12 @@
+--- a/configure
++++ b/configure
+@@ -7357,6 +7357,9 @@ dynamic_threads () {
+ 	esac
+ }
+ 
++GLIB_LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $GLIB_LIBS"
++LIBS="-Wl,-rpath-link=$STAGING_DIR/usr/lib/libiconv-full/lib $LIBS"
++
+ case "$ostype" in
+ 	FreeBSD)
+ 		GLIB_LIBS="$GLIB_LIBS -lintl"

topologyd/Makefile

@@ -8,7 +8,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=topologyd
 PKG_VERSION:=0.1
 
-PKG_SOURCE_VERSION:=23b812bb512189487484182ab736e957d54da9f3
+PKG_SOURCE_VERSION:=b520fe65d2469ff52cc70328fce753f67cf998e5
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/topologyd.git
 

topologyd/files/etc/init.d/topologyd

@@ -17,7 +17,7 @@ start_service() {
 	fi
 
 	procd_set_param respawn
-#	procd_set_param stdout 1
+	procd_set_param stdout 1
 	procd_set_param stderr 1
 	procd_close_instance
 }

uboot/Makefile

@@ -14,7 +14,7 @@ PKG_SOURCE_PROTO:=git
 
 ifdef CONFIG_TARGET_intel_mips
 PKG_SOURCE_URL:=git@dev.iopsys.eu:intel/uboot.git
-PKG_SOURCE_VERSION:=a6292375108a6d5f200f234f5eef3fe17f427092
+PKG_SOURCE_VERSION:=b3bc3af5831f14d9cd4d983522bc45a1fd9fa26c
 else
 PKG_SOURCE_URL:=https://dev.iopsys.eu/fork/uboot.git
 PKG_SOURCE_VERSION:=3ef2ba866a99205496e0ce01935c89a1778d9b85
@@ -59,29 +59,21 @@ define uboot/grx500
   TITLE:=U-Boot for the grx
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=8
+  PKG_RELEASE:=5
 endef
 
 define uboot/grx500_speedport_smart3
   TITLE:=U-Boot for the Speedport Smart3
   UBOOT_IMG:=u-boot-nand.bin
   DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=7
-endef
-
-define uboot/grx500_norrland
-  TITLE:=U-Boot for Norrland Board
-  UBOOT_IMG:=u-boot-nand.bin
-  DEPENDS:=@TARGET_intel_mips
-  PKG_RELEASE:=8
+  PKG_RELEASE:=5
 endef
 
 UBOOTS := \
 	ex400 \
 	sdx810_ap \
 	grx500 \
-	grx500_speedport_smart3 \
-	grx500_norrland
+	grx500_speedport_smart3
 
 define Package/uboot/template
 define Package/uboot-$(1)
@@ -103,14 +95,13 @@ ifdef BUILD_VARIANT
 $(eval $(call uboot/$(BUILD_VARIANT)))
 UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
 UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
-UBOOT_IOPSYS_VERSION:=$(PKG_RELEASE)
 endif
 
 define Build/Configure
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		$(UBOOT_CONFIG)_config
 
-	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(UBOOT_IOPSYS_VERSION)\"," $(PKG_BUILD_DIR)/.config
+	$(SED) "s,CONFIG_INTENO_MAJOR=\"0\",CONFIG_INTENO_MAJOR=\"$(PKG_RELEASE)\"," $(PKG_BUILD_DIR)/.config
 
 	+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
 		oldconfig

uboot/files/etc/init.d/uboot

@@ -40,10 +40,6 @@ uboot_upgrade(){
 start() {
     iver=$(fw_printenv -n uboot_inteno_version 2>/dev/null)
 
-    # Fixup improper json string for major and minor key.
-    # this adds the missing "
-    iver=$(echo $iver | sed -e 's/{Major:/{"Major":/' | sed -e 's/,Minor:/,"Minor":/')
-    
     if [ -z "$iver" ]
     then
 	# if this variable is not set by u-boot the u-boot version is too old.

voice-client/files/etc/asterisk_templates/acl.conf.TEMPLATE

@@ -1,80 +0,0 @@
-;
-; Named Access Control Lists (ACLs)
-;
-; A convenient way to share acl definitions
-;
-; This configuration file is read on startup
-;
-; CLI Commands
-; -----------------------------------------------------------
-;   acl show                         Show all named ACLs configured
-;   acl show <name>                  Show contents of a particular named ACL
-;   reload acl                       Reload configuration file
-;
-; Any configuration that uses ACLs which has been made to be able to use named
-; ACLs will specify a named ACL with the 'acl' option in its configuration in
-; a similar fashion to the usual 'permit' and 'deny' options. Example:
-; acl=my_named_acl
-;
-; Multiple named ACLs can be applied by either comma separating the arguments or
-; just by adding additional ACL lines. Example:
-; acl=my_named_acl
-; acl=my_named_acl2
-;
-; or
-;
-; acl=my_named_acl,my_named_acl2
-;
-; ACLs specified by name are evaluated independently from the ACL specified via
-; permit/deny. In order for an address to pass a given ACL, it must pass both
-; the ACL specified by permit/deny for a given item as well as any named ACLs
-; that were specified.
-;
-;[example_named_acl1]
-;deny=0.0.0.0/0.0.0.0
-;permit=209.16.236.0
-;permit=209.16.236.1
-;
-;[example_named_acl2]
-;permit=0.0.0.0/0.0.0.0
-;deny=10.24.20.171
-;deny=10.24.20.103
-;deny=209.16.236.1
-;
-; example_named_acl1 above shows an example of whitelisting. When whitelisting, the
-; named ACLs should follow a deny that blocks everything (like deny=0.0.0.0/0.0.0.0)
-; The following example explains how combining the ACLs works:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-;
-; Suppose 209.16.236.0 tries to communicate and the ACL for that example is applied to it...
-; First, example_named_acl1 is evaluated. The address is allowed by that ACL.
-; Next, example_named_acl2 is evaluated. The address isn't blocked by example_named_acl2
-; either, so it passes.
-;
-; Suppose instead 209.16.236.1 tries to communicate and the same ACL is applied.
-; First, example_named_acl1 is evaluated and the address is allowed.
-; However, it is blocked by example_named_acl2, so the address is blocked from the combined
-; ACL.
-;
-; Similarly, the permits/denies in specific configurations that make up an ACL definition
-; are also treated as a separate ACL for evaluation. So if we change the example above to:
-; <in another configuration>
-; [example_item_with_acl]
-; acl=example_named_acl1
-; acl=example_named_acl2
-; deny=209.16.236.0
-;
-; Then 209.16.236.0 will be rejected by the non-named component of the combined ACL even
-; though it passes the two named components.
-;
-;
-; Named ACLs can use ipv6 addresses just like normal ACLs.
-;[ipv6_example_1]
-;deny = ::
-;permit = ::1/128
-;
-;[ipv6_example_2]
-;permit = fe80::21d:bad:fad:2323

voice-client/files/etc/asterisk_templates/cdr_custom.conf.TEMPLATE

@@ -1,14 +0,0 @@
-;
-; Mappings for custom config file
-;
-; To get your CSV output in a format tailored to your liking, uncomment the
-; following lines and look for the output in the cdr-custom directory (usually
-; in /var/log/asterisk).  Depending on which mapping you uncomment, you may see
-; Master.csv, Simple.csv, or both.
-;
-;[mappings]
-;Master.csv => ${CSV_QUOTE(${CDR(clid)})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})},${CSV_QUOTE(${CDR(dcontext)})},${CSV_QUOTE(${CDR(channel)})},${CSV_QUOTE(${CDR(dstchannel)})},${CSV_QUOTE(${CDR(lastapp)})},${CSV_QUOTE(${CDR(lastdata)})},${CSV_QUOTE(${CDR(start)})},${CSV_QUOTE(${CDR(answer)})},${CSV_QUOTE(${CDR(end)})},${CSV_QUOTE(${CDR(duration)})},${CSV_QUOTE(${CDR(billsec)})},${CSV_QUOTE(${CDR(disposition)})},${CSV_QUOTE(${CDR(amaflags)})},${CSV_QUOTE(${CDR(accountcode)})},${CSV_QUOTE(${CDR(uniqueid)})},${CSV_QUOTE(${CDR(userfield)})},${CDR(sequence)}
-;
-; High Resolution Time for billsec and duration fields
-;Master.csv => ${CSV_QUOTE(${CDR(clid)})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})},${CSV_QUOTE(${CDR(dcontext)})},${CSV_QUOTE(${CDR(channel)})},${CSV_QUOTE(${CDR(dstchannel)})},${CSV_QUOTE(${CDR(lastapp)})},${CSV_QUOTE(${CDR(lastdata)})},${CSV_QUOTE(${CDR(start)})},${CSV_QUOTE(${CDR(answer)})},${CSV_QUOTE(${CDR(end)})},${CSV_QUOTE(${CDR(duration,f)})},${CSV_QUOTE(${CDR(billsec,f)})},${CSV_QUOTE(${CDR(disposition)})},${CSV_QUOTE(${CDR(amaflags)})},${CSV_QUOTE(${CDR(accountcode)})},${CSV_QUOTE(${CDR(uniqueid)})},${CSV_QUOTE(${CDR(userfield)})},${CDR(sequence)}
-;Simple.csv => ${CSV_QUOTE(${EPOCH})},${CSV_QUOTE(${CDR(src)})},${CSV_QUOTE(${CDR(dst)})}

voice-client/files/etc/asterisk_templates/cel.conf.TEMPLATE

@@ -1,116 +0,0 @@
-;
-; Asterisk Channel Event Logging (CEL)
-;
-
-; Channel Event Logging is a mechanism to provide fine-grained event information
-; that can be used to generate billing information. Such event information can
-; be recorded to various backend modules.
-;
-
-[general]
-
-; CEL Activation
-;
-; Use the 'enable' keyword to turn CEL on or off.
-;
-; Accepted values: yes and no
-; Default value:   no
-
-;enable=yes
-
-; Application Tracking
-;
-; Use the 'apps' keyword to specify the list of applications for which you want
-; to receive CEL events.  This is a comma separated list of Asterisk dialplan
-; applications, such as Dial, Queue, and Park.
-;
-; Accepted values: A comma separated list of Asterisk dialplan applications
-; Default value:   none
-;
-; Note: You may also use 'all' which will result in CEL events being reported
-;       for all Asterisk applications.  This may affect Asterisk's performance
-;       significantly.
-
-apps=dial,park
-
-; Event Tracking
-;
-; Use the 'events' keyword to specify the list of events which you want to be
-; raised when they occur.  This is a comma separated list of the values in the
-; table below.
-;
-; Accepted values: A comma separated list of one or more of the following:
-;  ALL              -- Generate entries on all events
-;  CHAN_START       -- The time a channel was created
-;  CHAN_END         -- The time a channel was terminated
-;  ANSWER           -- The time a channel was answered (ie, phone taken off-hook)
-;  HANGUP           -- The time at which a hangup occurred
-;  BRIDGE_ENTER       -- The time a channel was connected into a conference room
-;  BRIDGE_EXIT        -- The time a channel was removed from a conference room
-;  APP_START        -- The time a tracked application was started
-;  APP_END          -- the time a tracked application ended
-;  PARK_START       -- The time a call was parked
-;  PARK_END         -- Unpark event
-;  BLINDTRANSFER    -- When a blind transfer is initiated
-;  ATTENDEDTRANSFER -- When an attended transfer is initiated
-;  PICKUP           -- This channel picked up the specified channel
-;  FORWARD          -- This channel is being forwarded somewhere else
-;  LINKEDID_END     -- The last channel with the given linkedid is retired
-;  USER_DEFINED     -- Triggered from the dialplan, and has a name given by the
-;                      user
-;  LOCAL_OPTIMIZE   -- A local channel pair is optimizing away.
-;
-; Default value: none
-;                (Track no events)
-
-events=APP_START,CHAN_START,CHAN_END,ANSWER,HANGUP,BRIDGE_ENTER,BRIDGE_EXIT
-
-; Date Format
-;
-; Use the 'dateformat' keyword to specify the date format used when CEL events
-; are raised.
-;
-; Accepted values: A strftime format string (see man strftime)
-;
-; Example: "%F %T"
-;  -> This gives the date and time in the format "2009-06-23 17:02:35"
-;
-; If this option is not specified, the default format is "<seconds>.<microseconds>"
-; since epoch.  The microseconds field will always be 6 digits in length, meaning it
-; may have leading zeros.
-;
-;dateformat = %F %T
-
-;
-; Asterisk Manager Interface (AMI) CEL Backend
-;
-[manager]
-
-; AMI Backend Activation
-;
-; Use the 'enable' keyword to turn CEL logging to the Asterisk Manager Interface
-; on or off.
-;
-; Accepted values: yes and no
-; Default value:   no
-;enabled=yes
-
-; Use 'show_user_defined' to put "USER_DEFINED" in the EventName header,
-; instead of (by default) just putting the user defined event name there.
-; When enabled the UserDefType header is added for user defined events to
-; provide the user defined event name.
-;
-;show_user_defined=yes
-
-;
-; RADIUS CEL Backend 
-;
-[radius]
-;
-; Log date/time in GMT
-;usegmtime=yes
-;
-; Set this to the location of the radiusclient-ng configuration file
-; The default is /etc/radiusclient-ng/radiusclient.conf
-;radiuscfg => /usr/local/etc/radiusclient-ng/radiusclient.conf
-;

voice-client/files/etc/asterisk_templates/confbridge.conf.TEMPLATE

@@ -1,383 +0,0 @@
-[general]
-; The general section of this config
-; is not currently used, but reserved
-; for future use.
-
-;
-; --- Default Information ---
-; The default_user and default_bridge sections are applied
-; automatically to all ConfBridge instances invoked without
-; a user, or bridge argument.  No menu is applied by default.
-;
-; Note that while properties of the default_user or default_bridge
-; profile can be overridden, if removed, they will be automatically
-; added and made available to the dialplan upon module load.
-;
-
-; --- ConfBridge User Profile Options ---
-[default_user]
-type=user
-;admin=yes     ; Sets if the user is an admin or not. Off by default.
-;marked=yes    ; Sets if this is a marked user or not. Off by default.
-;startmuted=yes; Sets if all users should start out muted. Off by default
-;music_on_hold_when_empty=yes  ; Sets whether MOH should be played when only
-                               ; one person is in the conference or when the
-                               ; the user is waiting on a marked user to enter
-                               ; the conference. Off by default.
-;music_on_hold_class=default   ; The MOH class to use for this user.
-;quiet=yes     ; When enabled enter/leave prompts and user intros are not played.
-               ; There are some prompts, such as the prompt to enter a PIN number,
-               ; that must be played regardless of what this option is set to.
-               ; Off by default
-;announce_user_count=yes  ; Sets if the number of users should be announced to the
-                          ; caller.  Off by default.
-;announce_user_count_all=yes ; Sets if the number of users should be announced to
-                             ; all the other users in the conference when someone joins.
-                             ; This option can be either set to 'yes' or a number.
-                             ; When set to a number, the announcement will only occur
-                             ; once the user count is above the specified number.
-;announce_only_user=yes   ; Sets if the only user announcement should be played
-                          ; when a channel enters a empty conference.  On by default.
-;wait_marked=yes   ; Sets if the user must wait for a marked user to enter before
-                   ; joining the conference. Off by default.
-;end_marked=yes ; This option will kick every user with this option set in their
-                ; user profile after the last Marked user exists the conference.
-
-;dsp_drop_silence=yes  ; This option drops what Asterisk detects as silence from
-                       ; entering into the bridge.  Enabling this option will drastically
-                       ; improve performance and help remove the buildup of background
-                       ; noise from the conference. Highly recommended for large conferences
-                       ; due to its performance enhancements.
-
-;dsp_talking_threshold=128  ; The time in milliseconds of sound above what the dsp has
-                            ; established as base line silence for a user before a user
-                            ; is considered to be talking.  This value affects several
-                            ; operations and should not be changed unless the impact on
-                            ; call quality is fully understood.
-                            ;
-                            ; What this value affects internally:
-                            ;
-                            ; 1. Audio is only mixed out of a user's incoming audio stream
-                            ;    if talking is detected.  If this value is set too
-                            ;    loose the user will hear themselves briefly each
-                            ;    time they begin talking until the dsp has time to
-                            ;    establish that they are in fact talking.
-                            ; 2. When talk detection AMI events are enabled, this value
-                            ;    determines when talking has begun which results in
-                            ;    an AMI event to fire.  If this value is set too tight
-                            ;    AMI events may be falsely triggered by variants in
-                            ;    room noise.
-                            ; 3. The drop_silence option depends on this value to determine
-                            ;    when the user's audio should be mixed into the bridge
-                            ;    after periods of silence.  If this value is too loose
-                            ;    the beginning of a user's speech will get cut off as they
-                            ;    transition from silence to talking.
-                            ;
-                            ; By default this value is 160 ms. Valid values are 1 through 2^31
-
-;dsp_silence_threshold=2000 ; The time in milliseconds of sound falling within the what
-                            ; the dsp has established as baseline silence before a user
-                            ; is considered be silent.  This value affects several
-                            ; operations and should not be changed unless the impact
-                            ; on call quality is fully understood.
-                            ;
-                            ; What this value affects internally:
-                            ;
-                            ; 1. When talk detection AMI events are enabled, this value
-                            ;    determines when the user has stopped talking after a
-                            ;    period of talking.  If this value is set too low
-                            ;    AMI events indicating the user has stopped talking
-                            ;    may get falsely sent out when the user briefly pauses
-                            ;    during mid sentence.
-                            ; 2. The drop_silence option depends on this value to
-                            ;    determine when the user's audio should begin to be
-                            ;    dropped from the conference bridge after the user
-                            ;    stops talking.  If this value is set too low the user's
-                            ;    audio stream may sound choppy to the other participants.
-                            ;    This is caused by the user transitioning constantly from
-                            ;    silence to talking during mid sentence.
-                            ;
-                            ; The best way to approach this option is to set it slightly above
-                            ; the maximum amount of ms of silence a user may generate during
-                            ; natural speech.
-                            ;
-                            ; By default this value is 2500ms. Valid values are 1 through 2^31
-
-;talk_detection_events=yes ; This option sets whether or not notifications of when a user
-                           ; begins and ends talking should be sent out as events over AMI.
-                           ; By default this option is off.
-
-;denoise=yes ; Sets whether or not a denoise filter should be applied
-             ; to the audio before mixing or not.  Off by default. Requires
-             ; func_speex to be built and installed.  Do not confuse this option
-             ; with drop_silence.  Denoise is useful if there is a lot of background
-             ; noise for a user as it attempts to remove the noise while preserving
-             ; the speech.  This option does NOT remove silence from being mixed into
-             ; the conference and does come at the cost of a slight performance hit.
-
-;jitterbuffer=yes  ; Enabling this option places a jitterbuffer on the user's audio stream
-                   ; before audio mixing is performed.  This is highly recommended but will
-                   ; add a slight delay to the audio.  This option is using the JITTERBUFFER
-                   ; dialplan function's default adaptive jitterbuffer.  For a more fine tuned
-                   ; jitterbuffer, disable this option and use the JITTERBUFFER dialplan function
-                   ; on the user before entering the ConfBridge application.
-
-;pin=1234  ; Sets if this user must enter a PIN number before entering
-           ; the conference.  The PIN will be prompted for.
-;announce_join_leave=yes ; When enabled, this option will prompt the user for a
-                         ; name when entering the conference.  After the name is
-                         ; recorded, it will be played as the user enters and exists
-                         ; the conference. This option is off by default.
-;announce_join_leave_review=yes ; When enabled, implies announce_join_leave, but the user
-                                ; will be prompted to review their recording before
-                                ; entering the conference. During this phase, the recording
-                                ; may be listened to, re-recorded, or accepted as is. This
-                                ; option is off by default.
-;dtmf_passthrough=yes  ; Sets whether or not DTMF should pass through the conference.
-                       ; This option is off by default.
-;announcement=</path/to/file> ; Play a sound file to the user when they join the conference.
-
-;timeout=3600 ; When set non-zero, this specifies the number of seconds that the participant
-              ; may stay in the conference before being automatically ejected. When the user
-              ; is ejected from the conference, the user's channel will have the CONFBRIDGE_RESULT
-              ; variable set to "TIMEOUT". A value of 0 indicates that there is no timeout.
-              ; Default: 0
-
-; --- ConfBridge Bridge Profile Options ---
-[default_bridge]
-type=bridge
-;max_members=50                ; This option limits the number of participants for a single
-                               ; conference to a specific number.  By default conferences
-                               ; have no participant limit. After the limit is reached, the
-                               ; conference will be locked until someone leaves.  Note however
-                               ; that an Admin user will always be alowed to join the conference
-                               ; regardless if this limit is reached or not.
-
-;record_conference=yes         ; Records the conference call starting when the first user
-                               ; enters the room, and ending when the last user exits the room.
-                               ; The default recorded filename is
-                               ; 'confbridge-<name of conference bridge>-<start time>.wav
-                               ; and the default format is 8khz slinear.  This file will be
-                               ; located in the configured monitoring directory in asterisk.conf.
-
-;record_file=</path/to/file>   ; When record_conference is set to yes, the specific name of the
-                               ; record file can be set using this option.  Note that since multiple
-                               ; conferences may use the same bridge profile, this may cause issues
-                               ; depending on the configuration.  It is recommended to only use this
-                               ; option dynamically with the CONFBRIDGE() dialplan function. This
-                               ; allows the record name to be specified and a unique name to be chosen.
-                               ; By default, the record_file is stored in Asterisk's spool/monitor directory
-                               ; with a unique filename starting with the 'confbridge' prefix.
-
-;internal_sample_rate=auto     ; Sets the internal native sample rate the
-                               ; conference is mixed at.  This is set to automatically
-                               ; adjust the sample rate to the best quality by default.
-                               ; Other values can be anything from 8000-192000.  If a
-                               ; sample rate is set that Asterisk does not support, the
-                               ; closest sample rate Asterisk does support to the one requested
-                               ; will be used.
-
-;mixing_interval=40     ; Sets the internal mixing interval in milliseconds for the bridge.  This
-                        ; number reflects how tight or loose the mixing will be for the conference.
-                        ; In order to improve performance a larger mixing interval such as 40ms may
-                        ; be chosen.  Using a larger mixing interval comes at the cost of introducing
-                        ; larger amounts of delay into the bridge.  Valid values here are 10, 20, 40,
-                        ; or 80.  By default 20ms is used.
-
-;video_mode = follow_talker; Sets how confbridge handles video distribution to the conference participants.
-                           ; Note that participants wanting to view and be the source of a video feed
-                           ; _MUST_ be sharing the same video codec.  Also, using video in conjunction with
-                           ; with the jitterbuffer currently results in the audio being slightly out of sync
-                           ; with the video.  This is a result of the jitterbuffer only working on the audio
-                           ; stream.  It is recommended to disable the jitterbuffer when video is used.
-                           ;
-                           ; --- MODES ---
-                           ; none: No video sources are set by default in the conference. It is still
-                           ;       possible for a user to be set as a video source via AMI or DTMF action
-                           ;       at any time.
-                           ;
-                           ; follow_talker: The video feed will follow whoever is talking and providing video.
-                           ;
-                           ; last_marked: The last marked user to join the conference with video capabilities
-                           ;              will be the single source of video distributed to all participants.
-                           ;              If multiple marked users are capable of video, the last one to join
-                           ;              is always the source, when that user leaves it goes to the one who
-                           ;              joined before them.
-                           ;
-                           ; first_marked: The first marked user to join the conference with video capabilities
-                           ;               is the single source of video distribution among all participants. If
-                           ;               that user leaves, the marked user to join after them becomes the source.
-
-;language=en               ; Set the language used for announcements to the conference.
-                           ; Default is en (English).
-
-;regcontext=conferences    ; The name of the context into which to register conference names as extensions.
-
-; All sounds in the conference are customizable using the bridge profile options below.
-; Simply state the option followed by the filename or full path of the filename after
-; the option.  Example: sound_had_joined=conf-hasjoin  This will play the conf-hasjoin
-; sound file found in the sounds directory when announcing someone's name is joining the
-; conference.
-
-;sound_join  ; The sound played to everyone when someone enters the conference.
-;sound_leave ; The sound played to everyone when someone leaves the conference.
-;sound_has_joined ; The sound played before announcing someone's name has
-                  ; joined the conference. This is used for user intros.
-                  ; Example "_____ has joined the conference"
-;sound_has_left ; The sound played when announcing someone's name has
-                ; left the conference. This is used for user intros.
-                ; Example "_____ has left the conference"
-;sound_kicked ; The sound played to a user who has been kicked from the conference.
-;sound_muted  ; The sound played when the mute option it toggled on.
-;sound_unmuted  ; The sound played when the mute option it toggled off.
-;sound_only_person ; The sound played when the user is the only person in the conference.
-;sound_only_one ; The sound played to a user when there is only one other
-                ; person is in the conference.
-;sound_there_are  ; The sound played when announcing how many users there
-                  ; are in a conference.
-;sound_other_in_party; ; This file is used in conjunction with 'sound_there_are"
-                       ; when announcing how many users there are in the conference.
-                       ; The sounds are stringed together like this.
-                       ; "sound_there_are" <number of participants> "sound_other_in_party"
-;sound_place_into_conference ; The sound played when someone is placed into the conference
-                             ; after waiting for a marked user. This sound is now deprecated
-                             ; since it was only ever used improperly and correcting that bug
-                             ; made it completely unused.
-;sound_wait_for_leader  ; The sound played when a user is placed into a conference that
-                        ; can not start until a marked user enters.
-;sound_leader_has_left  ; The sound played when the last marked user leaves the conference.
-;sound_get_pin ; The sound played when prompting for a conference pin number.
-;sound_invalid_pin ; The sound played when an invalid pin is entered too many times.
-;sound_locked ; The sound played to a user trying to join a locked conference.
-;sound_locked_now ; The sound played to an admin after toggling the conference to locked mode.
-;sound_unlocked_now; The sound played to an admin after toggling the conference to unlocked mode.
-;sound_error_menu ; The sound played when an invalid menu option is entered.
-;sound_begin ; The sound played to the conference when the first marked user enters the conference.
-
-; --- ConfBridge Menu Options ---
-; The ConfBridge application also has the ability to
-; apply custom DTMF menus to each channel using the
-; application.  Like the User and Bridge profiles
-; a menu is passed in to ConfBridge as an argument in
-; the dialplan.
-;
-; Below is a list of menu actions that can be assigned
-; to a DTMF sequence.
-;
-; To have the first DTMF digit in a sequence be the '#' character, you need to
-; escape it.  If it is not escaped then normal config file processing will
-; think it is a directive like #include.  For example:
-; \#1=toggle_mute                      ; Pressing #1 will toggle the mute setting.
-;
-; A single DTMF sequence can have multiple actions associated with it. This is
-; accomplished by stringing the actions together and using a ',' as the delimiter.
-; Example:  Both listening and talking volume is reset when '5' is pressed.
-; 5=reset_talking_volume, reset_listening_volume
-;
-; playback(<name of audio file>&<name of audio file>)
-                                       ; Playback will play back an audio file to a channel
-                                       ; and then immediately return to the conference.
-                                       ; This file can not be interupted by DTMF.
-                                       ; Mutliple files can be chained together using the
-                                       ; '&' character.
-; playback_and_continue(<name of playback prompt>&<name of playback prompt>)
-                                       ; playback_and_continue will
-                                       ; play back a prompt while continuing to
-                                       ; collect the dtmf sequence.  This is useful
-                                       ; when using a menu prompt that describes all
-                                       ; the menu options.  Note however that any DTMF
-                                       ; during this action will terminate the prompts
-                                       ; playback.  Prompt files can be chained together
-                                       ; using the '&' character as a delimiter.
-; toggle_mute      ; Toggle turning on and off mute.  Mute will make the user silent
-                   ; to everyone else, but the user will still be able to listen in.
-
-; no_op ; This action does nothing (No Operation). Its only real purpose exists for
-        ; being able to reserve a sequence in the config as a menu exit sequence.
-; decrease_listening_volume ; Decreases the channel's listening volume.
-; increase_listening_volume ; Increases the channel's listening volume.
-; reset_listening_volume    ; Reset channel's listening volume to default level.
-
-; decrease_talking_volume ; Decreases the channel's talking volume.
-; increase_talking_volume ; Icreases the channel's talking volume.
-; reset_talking_volume    ; Reset channel's talking volume to default level.
-;
-; dialplan_exec(context,exten,priority)  ; The dialplan_exec action allows a user
-                                         ; to escape from the conference and execute
-                                         ; commands in the dialplan.  Once the dialplan
-                                         ; exits the user will be put back into the
-                                         ; conference.  The possibilities are endless!
-; leave_conference ; This action allows a user to exit the conference and continue
-                   ; execution in the dialplan.
-;
-; admin_kick_last  ; This action allows an Admin to kick the last participant from the
-                   ; conference. This action will only work for admins which allows
-                   ; a single menu to be used for both users and admins.
-;
-; admin_toggle_conference_lock ; This action allows an Admin to toggle locking and
-                               ; unlocking the conference.  Non admins can not use
-                               ; this action even if it is in their menu.
-
-; set_as_single_video_src   ; This action allows any user to set themselves as the
-                            ; single video source distributed to all participants.
-                            ; This will make the video feed stick to them regardless
-                            ; of what the video_mode is set to.
-
-; release_as_single_video_src ; This action allows a user to release themselves as
-                              ; the video source.  If video_mode is not set to "none"
-                              ; this action will result in the conference returning to
-                              ; whatever video mode the bridge profile is using.
-                              ;
-                              ; Note that this action will have no effect if the user
-                              ; is not currently the video source.  Also, the user is
-                              ; not guaranteed by using this action that they will not
-                              ; become the video source again.  The bridge will return
-                              ; to whatever operation the video_mode option is set to
-                              ; upon release of the video src.
-
-; admin_toggle_mute_participants ; This action allows an administrator to toggle the mute
-                                 ; state for all non-admins within a conference.
-                                 ; Subsequent non-admins joining a muted conference will
-                                 ; start muted.  All admin users are unaffected by this
-                                 ; option.  Note that all users, regardless of their admin
-                                 ; status, are notified that the conference is muted when
-                                 ; the state is toggled.
-
-; participant_count        ; This action plays back the number of participants currently
-                           ; in a conference
-
-[sample_user_menu]
-type=menu
-*=playback_and_continue(conf-usermenu)
-*1=toggle_mute
-1=toggle_mute
-*4=decrease_listening_volume
-4=decrease_listening_volume
-*6=increase_listening_volume
-6=increase_listening_volume
-*7=decrease_talking_volume
-7=decrease_talking_volume
-*8=leave_conference
-8=leave_conference
-*9=increase_talking_volume
-9=increase_talking_volume
-
-[sample_admin_menu]
-type=menu
-*=playback_and_continue(conf-adminmenu)
-*1=toggle_mute
-1=toggle_mute
-*2=admin_toggle_conference_lock ; only applied to admin users
-2=admin_toggle_conference_lock  ; only applied to admin users
-*3=admin_kick_last       ; only applied to admin users
-3=admin_kick_last        ; only applied to admin users
-*4=decrease_listening_volume
-4=decrease_listening_volume
-*6=increase_listening_volume
-6=increase_listening_volume
-*7=decrease_talking_volume
-7=decrease_talking_volume
-*8=no_op
-8=no_op
-*9=increase_talking_volume
-9=increase_talking_volume

voice-client/files/etc/asterisk_templates/indications.conf.TEMPLATE

@@ -155,7 +155,7 @@ ring = 425/1000,0/3000
 congestion = 425/167,0/167
 callwaiting = 1400/175,0/175,1400/175,0/3500
 ; DIALRECALL - not specified
-dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440
+dialrecall = !350+440/100,!0/100,!350+440/100,!0/100,!350+440/100,!0/100,350+440"
 ; RECORDTONE - not specified
 record = 1400/500,0/15000
 info = 900/330,1400/330,1800/330,0/1000

voice-client/files/etc/asterisk_templates/sip.conf.TEMPLATE

@@ -17,7 +17,7 @@ rtpholdtimeout=1800
 localnet=192.168.0.0/16
 localnet=10.0.0.0/8
 localnet=172.16.0.0/12
-nat=force_rport,comedia
+nat=yes
 directmedia=no
 sipdebug=no
 session-timers=refuse
@@ -49,6 +49,7 @@ tos_video=|TOS_VIDEO|		; Sets TOS for RTP video packets. Recommended = af41
 tos_text=|TOS_TEXT|		; Sets TOS for RTP text packets. Recommended = af41
 
 tcpenable=|TCPENABLE|
+tlsbindaddr=0.0.0.0
 
 tlsenable=|TLSENABLE|
 tlsbindaddr=0.0.0.0

voice-client/files/etc/asterisk_templates/sip_provider.TEMPLATE

@@ -9,7 +9,7 @@ insecure	= port,invite
 canreinvite	= no
 insecure	= invite
 ;qualify		= yes
-nat		= force_rport,comedia
+nat		= yes
 context		= incoming_calls
 port=|PORT|
 transport	= |TRANSPORT|

voice-client/files/etc/asterisk_templates/sip_provider_voicesec.TEMPLATE

@@ -9,7 +9,7 @@ insecure	= port,invite
 canreinvite	= no
 insecure	= invite
 ;qualify		= yes
-nat		= force_rport,comedia
+nat		= yes
 context		= incoming_calls
 port=|PORT|
 transport	= |TRANSPORT|

voice-client/files/etc/asterisk_templates/udptl.conf.TEMPLATE

@@ -1,26 +0,0 @@
-;
-; UDPTL Configuration (UDPTL is one of the transports for T.38)
-;
-[general]
-;
-; UDPTL start and UDPTL end configure start and end addresses
-;
-udptlstart=4000
-udptlend=4999
-;
-; Whether to enable or disable UDP checksums on UDPTL traffic
-;
-;udptlchecksums=no
-;
-; The number of error correction entries in a UDPTL packet
-;
-udptlfecentries = 3
-;
-; The span over which parity is calculated for FEC in a UDPTL packet
-;
-udptlfecspan = 3
-;
-; Some VoIP providers will only accept an offer with an even-numbered
-; UDPTL port. Set this option so that Asterisk will only attempt to use
-; even-numbered ports when negotiating T.38. Default is no.
-use_even_ports = no

voice-client/files/etc/hotplug.d/iface/80-asterisk

@@ -1,19 +0,0 @@
-#!/bin/sh
-
-[ "$ACTION" = "ifup" -a "$(uci -q get network.$INTERFACE.is_lan)" != "1" ] || exit 0
-
-config_load voice_client
-config_get bindintf SIP bindintf
-
-[ -n "$bindintf" -a "$INTERFACE" != "$bindintf" ] && exit 0
-
-. /lib/functions/network.sh
-
-if [ -n "$bindintf" ]; then
-	network_get_ipaddr bindaddr "$bindintf"
-	[ -z "$bindaddr" ] && network_get_ipaddr6 bindaddr "$bindintf"
-fi
-
-bindaddr="${bindaddr:-::}"
-sed -i "s/bindaddr=.*/bindaddr=$bindaddr/g" /etc/asterisk/sip.conf
-[ -e /var/run/asterisk/asterisk.ctl ] && asterisk -rx "sip reload"

voice-client/files/etc/init.d/voice_client

@@ -67,7 +67,6 @@ TMPL_QUEUE=$TEMPLATEDIR/queue.TEMPLATE
 TMPL_ASTERISK=$TEMPLATEDIR/asterisk.conf.TEMPLATE
 TMPL_CDR=$TEMPLATEDIR/cdr.conf.TEMPLATE
 TMPL_CDR_SYSLOG=$TEMPLATEDIR/cdr_syslog.conf.TEMPLATE
-TMPL_CDR_CUSTOM=$TEMPLATEDIR/cdr_custom.conf.TEMPLATE
 TMPL_INDICATIONS=$TEMPLATEDIR/indications.conf.TEMPLATE
 TMPL_CEL=$TEMPLATEDIR/cel.conf.TEMPLATE
 TMPL_LOGGER=$TEMPLATEDIR/logger.conf.TEMPLATE
@@ -76,9 +75,6 @@ TMPL_MODULES=$TEMPLATEDIR/modules.conf.TEMPLATE
 TMPL_FEATURES=$TEMPLATEDIR/features.conf.TEMPLATE
 TMPL_CODECS=$TEMPLATEDIR/codecs.conf.TEMPLATE
 TMPL_MUSICONHOLD=$TEMPLATEDIR/musiconhold.conf.TEMPLATE
-TMPL_ACL=$TEMPLATEDIR/acl.conf.TEMPLATE
-TMPL_CONFBRIDGE=$TEMPLATEDIR/confbridge.conf.TEMPLATE
-TMPL_UDPTL=$TEMPLATEDIR/udptl.conf.TEMPLATE
 
 TMPL_BRCM=$TEMPLATEDIR/brcm.conf.TEMPLATE
 TMPL_BRCM_LINE=$TEMPLATEDIR/brcm_line.TEMPLATE
@@ -154,11 +150,6 @@ assemble_and_copy_config()
 	[ -f $TMPL_MODULES ]		&& cp $TMPL_MODULES		$WORKDIR/modules.conf
 	[ -f $TMPL_EXTENSIONS_MACRO ]	&& cp $TMPL_EXTENSIONS_MACRO	$WORKDIR/extensions_macro.conf
 	[ -f $TMPL_MUSICONHOLD ]	&& cp $TMPL_MUSICONHOLD		$WORKDIR/musiconhold.conf
-	[ -f $TMPL_ACL ]	        && cp $TMPL_ACL		        $WORKDIR/acl.conf
-	[ -f $TMPL_CDR_CUSTOM ]	        && cp $TMPL_CDR_CUSTOM	        $WORKDIR/cdr_custom.conf
-	[ -f $TMPL_CDR_SYSLOG ]	        && cp $TMPL_CDR_SYSLOG	        $WORKDIR/cdr_syslog.conf
-	[ -f $TMPL_CONFBRIDGE ]	        && cp $TMPL_CONFBRIDGE	        $WORKDIR/confbridge.conf
-	[ -f $TMPL_UDPTL ]	        && cp $TMPL_UDPTL	        $WORKDIR/udptl.conf
 	[ -f $SPECRATECFG ]		&& cp $SPECRATECFG		$WORKDIR/special_rate_nr.cfg
 	
 	test -e $TMPL_MEETME && cp $TMPL_MEETME $WORKDIR/meetme.conf

wifilife/Makefile

@@ -7,7 +7,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=wifilife
 PKG_VERSION:=1.0.2
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=9a75b717d3cd95d88e394f5bcd8b4006dfa450ba
+PKG_SOURCE_VERSION:=25af2498b09575990031b1c5754a0893f1d44b80
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>
 
 ifeq ($(CONFIG_WIFILIFE_OPEN),y)
@@ -55,7 +55,8 @@ define Package/wifilife/install
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/wifilife.init $(1)/etc/init.d/wifilife
 	$(INSTALL_DIR) $(1)/etc/uci-defaults
-	$(INSTALL_BIN) ./files/etc/uci-defaults/* $(1)/etc/uci-defaults/
+	$(INSTALL_BIN) ./files/etc/uci-defaults/997-wifilife-add-owsd-wifi \
+				$(1)/etc/uci-defaults/997-wifilife-add-owsd-wifi
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/wifiagent $(1)/usr/sbin/
 endef

wifilife/files/etc/uci-defaults/997-wifilife-add-owsd-wifi

@@ -10,13 +10,4 @@ add_owsd_object_wifi() {
 	fi
 }
 
-add_dnsmasq_lease_hwmask() {
-	local ubusx="$(uci -q get owsd.ubusproxy.enable)"
-	if [ "$ubusx" == "1" ]; then
-		uci -q set dhcp.@dnsmasq[0].lease_hwmask='0x000000'
-		uci commit dhcp
-	fi
-}
-
 add_owsd_object_wifi
-add_dnsmasq_lease_hwmask

wifilife/files/wifilife.init

@@ -3,14 +3,12 @@
 START=96
 STOP=10
 PROG=/usr/sbin/wifiagent
-ENABLE=/tmp/owsd_enable
-USE_PROCD=1
-EXTRA_COMMANDS="enable_check"
 
+USE_PROCD=1
 
 start_service() {
 	procd_open_instance
-	procd_set_param command ${PROG} -d -l -f -o /tmp/wifiagent.log
+	procd_set_param command ${PROG} -d -l
 	procd_set_param respawn
 	procd_close_instance
 
@@ -18,42 +16,22 @@ start_service() {
 	config_load owsd
 	config_get enable ubusproxy enable
 	if [ "$enable" == "1" ]; then
-		echo $enable > $ENABLE
-		procd_set_param command ${PROG} -c -d -l -f -o /tmp/wificntlr.log
+		procd_set_param command ${PROG} -c -d -l
 	fi
 	procd_close_instance
 }
 
-#stop_service()
-#{
-#	service_stop ${PROG}
-#}
+stop_service()
+{
+	service_stop ${PROG}
+}
 
 reload_service() {
 #	procd_send_signal wifilife # use SIGHUP
 	stop
 	start
-
-	config_load owsd
-	config_get enable ubusproxy enable
-	if [ "$enable" == "1" ]; then
-		ubus call netmode sync_wifilife
-	fi
-}
-
-enable_check() {
-	config_load owsd
-	config_get enable ubusproxy enable
-
-	prev=$(cat $ENABLE)
-
-	if [ "$enable" != "$prev" ]; then
-		echo $enable > $ENABLE
-		reload
-	fi
 }
 
 service_triggers() {
-	procd_add_config_trigger "config.change" "wifilife" /etc/init.d/wifilife reload
-	procd_add_config_trigger "config.change" "owsd" /etc/init.d/wifilife enable_check
+        procd_add_reload_trigger "wifilife"
 }

wifimngr/Makefile

@@ -8,7 +8,7 @@ PKG_NAME:=wifimngr
 PKG_VERSION:=1.0.2
 
 PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=c7228ea031f407580ff8e4801e0ba544aeadd050
+PKG_SOURCE_VERSION:=a6b9256971aee59bb1049c8ac439ecb51619c72a
 PKG_SOURCE_URL:=https://dev.iopsys.eu/iopsys/wifimngr.git
 PKG_MAINTAINER:=Anjan Chanda <anjan.chanda@iopsys.eu>